Bug #130369 “WLAN Card not detected” : Bugs : linux-source-2.6.20 package : Ubuntu

Revision history for this message

IuK (swen-aust-deactivatedaccount) wrote on 2007-08-04:

#1

Dependencies.txt Edit (1.7 KiB, text/plain; charset="utf-8")

Revision history for this message

Paul Dufresne (paulduf) wrote on 2007-08-08:

#2

Thank you for taking the time to report this bug and helping to make Ubuntu better. Unfortunately we can't fix it, because your description doesn't yet have enough information.

If you are able to access Internet (probably by wire rather than wireless) with this computer, please include the following information:
1. Please include the output of the command "uname -a" in your next response. It should be one, long line of text which includes the exact kernel version you're running, as well as the CPU architecture.
2. Please run the command "dmesg > dmesg.log" and attach the resulting file "dmesg.log" to this bug report.
3. Please run the command "sudo lspci -vvnn > lspci-vvnn.log" and attach the resulting file "lspci-vvnn.log" to this bug report.

For your reference, the full description of procedures for kernel-related bug reports is available at [WWW] http://wiki.ubuntu.com/KernelTeamBugPolicies. Thanks in advance!

Revision history for this message

IuK (swen-aust-deactivatedaccount) wrote on 2007-08-08:

#3

Download full text (38.2 KiB)

Thank you for your help. Here is the information, you have asked for:

1. Please include the output of the command "uname -a" in your next response. It should be one, long line of text which includes the exact kernel version you're running, as well as the CPU architecture.

Linux ubuntu 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux

2. Please run the command "dmesg > dmesg.log" and attach the resulting file "dmesg.log" to this bug report.

[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fe50000 end: 000000001ff50000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001ff50000 size: 0000000000017000 end: 000000001ff67000 type: 3
[ 0.000000] copy_e820_map() start: 000000001ff67000 size: 0000000000012000 end: 000000001ff79000 type: 4
[ 0.000000] copy_e820_map() start: 000000001ff80000 size: 0000000000080000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff50000 (usable)
[ 0.000000] BIOS-e820: 000000001ff50000 - 000000001ff67000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ff67000 - 000000001ff79000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130896) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130896
[ 0.000000] HighMem 130896 -> 130896
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130896
[ 0.000000] On node 0 totalpages: 130896
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 990 pages used for memmap
[ 0.000000] Normal zone: 125810 pages, LIFO batch:3...

Thank you for your help. Here is the information, you have asked for:

1. Please include the output of the command "uname -a" in your next response. It should be one, long line of text which includes the exact kernel version you're running, as well as the CPU architecture.

Linux ubuntu 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux

2. Please run the command "dmesg > dmesg.log" and attach the resulting file "dmesg.log" to this bug report.

[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2
[    0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fe50000 end: 000000001ff50000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001ff50000 size: 0000000000017000 end: 000000001ff67000 type: 3
[    0.000000] copy_e820_map() start: 000000001ff67000 size: 0000000000012000 end: 000000001ff79000 type: 4
[    0.000000] copy_e820_map() start: 000000001ff80000 size: 0000000000080000 end: 0000000020000000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ff50000 (usable)
[    0.000000]  BIOS-e820: 000000001ff50000 - 000000001ff67000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ff67000 - 000000001ff79000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 130896) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   130896
[    0.000000]   HighMem    130896 ->   130896
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   130896
[    0.000000] On node 0 totalpages: 130896
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 990 pages used for memmap
[    0.000000]   Normal zone: 125810 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v002 IBM                                   ) @ 0x000f6d70
[    0.000000] ACPI: XSDT (v001 IBM    TP-1R    0x00003210  LTP 0x00000000) @ 0x1ff5a6bd
[    0.000000] ACPI: FADT (v003 IBM    TP-1R    0x00003210 IBM  0x00000001) @ 0x1ff5a800
[    0.000000] ACPI: SSDT (v001 IBM    TP-1R    0x00003210 MSFT 0x0100000e) @ 0x1ff5a9b4
[    0.000000] ACPI: ECDT (v001 IBM    TP-1R    0x00003210 IBM  0x00000001) @ 0x1ff66ecc
[    0.000000] ACPI: TCPA (v001 IBM    TP-1R    0x00003210 PTL  0x00000001) @ 0x1ff66f1e
[    0.000000] ACPI: BOOT (v001 IBM    TP-1R    0x00003210  LTP 0x00000001) @ 0x1ff66fd8
[    0.000000] ACPI: DSDT (v001 IBM    TP-1R    0x00003210 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
[    0.000000] Detected 598.069 MHz processor.
[   17.592274] Built 1 zonelists.  Total pages: 129874
[   17.592283] Kernel command line: find=/wubi/boot/linux ro quiet splash
[   17.592775] Local APIC disabled by BIOS -- you can enable it with "lapic"
[   17.592789] mapped APIC to ffffd000 (0140a000)
[   17.592797] Enabling fast FPU save and restore... done.
[   17.592805] Enabling unmasked SIMD FPU exception support... done.
[   17.592825] Initializing CPU#0
[   17.592912] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   17.594549] Console: colour VGA+ 80x25
[   17.594927] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   17.595461] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   17.625731] Memory: 507448k/523584k available (1992k kernel code, 15568k reserved, 900k data, 328k init, 0k highmem)
[   17.625761] virtual kernel memory layout:
[   17.625765]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   17.625769]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   17.625773]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   17.625777]     lowmem  : 0xc0000000 - 0xdff50000   ( 511 MB)
[   17.625780]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   17.625784]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
[   17.625788]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
[   17.625798] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   17.704912] Calibrating delay using timer specific routine.. 1197.39 BogoMIPS (lpj=2394783)
[   17.705022] Security Framework v1.0.0 initialized
[   17.705036] SELinux:  Disabled at boot.
[   17.705082] Mount-cache hash table entries: 512
[   17.705388] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[   17.705417] CPU: L1 I cache: 32K, L1 D cache: 32K
[   17.705425] CPU: L2 cache: 1024K
[   17.705431] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000
[   17.705455] Compat vDSO mapped to ffffe000.
[   17.705465] Remapping vsyscall page to ffffe000
[   17.705489] Checking 'hlt' instruction... OK.
[   17.721139] SMP alternatives: switching to UP code
[   17.721516] Freeing SMP alternatives: 11k freed
[   17.721963] Early unpacking initramfs... done
[   18.719699] ACPI: Core revision 20060707
[   18.720390] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   18.732884] ACPI: setting ELCR to 0200 (from 0800)
[   18.743798] CPU0: Intel(R) Pentium(R) M processor 1500MHz stepping 05
[   18.743811] SMP motherboard not detected.
[   18.743817] Local APIC not detected. Using dummy APIC emulation.
[   18.743887] Brought up 1 CPUs
[   18.744437] Booting paravirtualized kernel on bare hardware
[   18.744541] Time:  0:42:24  Date: 07/09/107
[   18.744604] NET: Registered protocol family 16
[   18.744775] EISA bus registered
[   18.744784] ACPI: bus type pci registered
[   18.744964] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
[   18.744970] PCI: Using configuration type 1
[   18.744975] Setting up standard PCI resources
[   18.773450] ACPI: Interpreter enabled
[   18.773457] ACPI: Using PIC for interrupt routing
[   18.775328] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[   18.776854] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[   18.778369] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[   18.779875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[   18.781392] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[   18.782784] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[   18.784167] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[   18.785702] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[   18.786670] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   18.786681] PCI: Probing PCI hardware (bus 00)
[   18.790224] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[   18.790234] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[   18.790603] Boot video device is 0000:01:00.0
[   18.790821] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[   18.790911] PCI: Transparent bridge - 0000:00:1e.0
[   18.791130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   18.804189] ACPI: Power Resource [PUBS] (on)
[   18.806095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[   18.806749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[   18.811960] Linux Plug and Play Support v0.97 (c) Adam Belay
[   18.811982] pnp: PnP ACPI init
[   18.822730] pnp: PnP ACPI: found 13 devices
[   18.822740] PnPBIOS: Disabled by ACPI PNP
[   18.822842] PCI: Using ACPI for IRQ routing
[   18.822851] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   18.835506] NET: Registered protocol family 8
[   18.835512] NET: Registered protocol family 20
[   18.837912] PCI: Bridge: 0000:00:01.0
[   18.837919]   IO window: 3000-3fff
[   18.837929]   MEM window: c0100000-c01fffff
[   18.837937]   PREFETCH window: e0000000-e7ffffff
[   18.837954] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[   18.837961]   IO window: 00004000-000040ff
[   18.837970]   IO window: 00004400-000044ff
[   18.837979]   PREFETCH window: e8000000-ebffffff
[   18.837988]   MEM window: c4000000-c7ffffff
[   18.837997] PCI: Bus 7, cardbus bridge: 0000:02:00.1
[   18.838003]   IO window: 00004800-000048ff
[   18.838011]   IO window: 00004c00-00004cff
[   18.838020]   PREFETCH window: ec000000-efffffff
[   18.838030]   MEM window: c8000000-cbffffff
[   18.838037] PCI: Bridge: 0000:00:1e.0
[   18.838044]   IO window: 4000-8fff
[   18.838055]   MEM window: c0200000-cfffffff
[   18.838064]   PREFETCH window: e8000000-efffffff
[   18.838089] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   18.839213] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   18.839221] PCI: setting IRQ 11 as level-triggered
[   18.839229] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   18.840329] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[   18.840336] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   18.840400] NET: Registered protocol family 2
[   18.872966] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   18.873148] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   18.873406] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[   18.873538] TCP: Hash tables configured (established 16384 bind 8192)
[   18.873545] TCP reno registered
[   18.885126] checking if image is initramfs... it is
[   20.850558] Freeing initrd memory: 7371k freed
[   20.850920] Simple Boot Flag at 0x35 set to 0x1
[   20.851280] audit: initializing netlink socket (disabled)
[   20.851305] audit(1186620145.440:1): initialized
[   20.851595] VFS: Disk quotas dquot_6.5.1
[   20.851639] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   20.851745] io scheduler noop registered
[   20.851752] io scheduler anticipatory registered
[   20.851759] io scheduler deadline registered
[   20.851787] io scheduler cfq registered (default)
[   20.852358] isapnp: Scanning for PnP cards...
[   21.206042] isapnp: No Plug & Play device found
[   21.271971] Real Time Clock Driver v1.12ac
[   21.272094] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   21.274846] pnp: Device 00:0a activated.
[   21.275096] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[   21.275538] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   21.275557] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[   21.275697] mice: PS/2 mouse device common for all mice
[   21.277041] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   21.277559] input: Macintosh mouse button emulation as /class/input/input0
[   21.277641] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   21.277650] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   21.277984] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   21.284504] serio: i8042 KBD port at 0x60,0x64 irq 1
[   21.284515] serio: i8042 AUX port at 0x60,0x64 irq 12
[   21.284785] EISA: Probing bus 0 at eisa.0
[   21.284799] Cannot allocate resource for EISA slot 1
[   21.284807] Cannot allocate resource for EISA slot 2
[   21.284814] Cannot allocate resource for EISA slot 3
[   21.284821] Cannot allocate resource for EISA slot 4
[   21.284827] Cannot allocate resource for EISA slot 5
[   21.284834] Cannot allocate resource for EISA slot 6
[   21.284840] Cannot allocate resource for EISA slot 7
[   21.284847] Cannot allocate resource for EISA slot 8
[   21.284853] EISA: Detected 0 cards.
[   21.315051] TCP cubic registered
[   21.315070] NET: Registered protocol family 1
[   21.315120] Using IPI No-Shortcut mode
[   21.315238] ACPI: (supports S0 S3 S4 S5)
[   21.315351]   Magic number: 3:368:708
[   21.315926] Freeing unused kernel memory: 328k freed
[   21.316688] Time: tsc clocksource has been installed.
[   21.317732] input: AT Translated Set 2 keyboard as /class/input/input1
[   22.898755] md: raid1 personality registered for level 1
[   22.908787] md: raid0 personality registered for level 0
[   23.021059] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[   23.130146] SCSI subsystem initialized
[   23.157642] libata version 2.20 loaded.
[   23.209428] usbcore: registered new interface driver usbfs
[   23.209510] usbcore: registered new interface driver hub
[   23.209591] usbcore: registered new device driver usb
[   23.215148] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[   23.215158] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[   23.215184] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   23.215192] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   23.215311] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   23.215371] ehci_hcd 0000:00:1d.7: debug port 1
[   23.215382] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   23.215400] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
[   23.219282] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   23.219569] usb usb1: configuration #1 chosen from 1 choice
[   23.219667] hub 1-0:1.0: USB hub found
[   23.219681] hub 1-0:1.0: 6 ports detected
[   23.332754] USB Universal Host Controller Interface driver v3.0
[   23.332879] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   23.332902] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   23.332911] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   23.333001] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   23.333037] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[   23.333330] usb usb2: configuration #1 chosen from 1 choice
[   23.333426] hub 2-0:1.0: USB hub found
[   23.333441] hub 2-0:1.0: 2 ports detected
[   23.437959] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[   23.437967] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   23.437986] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   23.437995] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   23.438085] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   23.438116] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[   23.438399] usb usb3: configuration #1 chosen from 1 choice
[   23.438494] hub 3-0:1.0: USB hub found
[   23.438509] hub 3-0:1.0: 2 ports detected
[   23.541883] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   23.541891] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[   23.541909] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   23.541918] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   23.542007] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   23.542038] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[   23.542309] usb usb4: configuration #1 chosen from 1 choice
[   23.542402] hub 4-0:1.0: USB hub found
[   23.542416] hub 4-0:1.0: 2 ports detected
[   23.655954] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   23.666176] usbcore: registered new interface driver libusual
[   23.680144] Initializing USB Mass Storage driver...
[   23.680222] usbcore: registered new interface driver usb-storage
[   23.680229] USB Mass Storage support registered.
[   23.719108] ata_piix 0000:00:1f.1: version 2.10ac1
[   23.719133] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   23.719149] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[   23.719187] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   23.719279] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14
[   23.719337] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15
[   23.719374] scsi0 : ata_piix
[   23.881043] ata1.00: ata_hpa_resize 1: sectors = 71762930, hpa_sectors = 78140160
[   23.881055] ata1.00: Host Protected Area detected.
[   23.881059]      current size : 71762930 sectors (36742 MB)
[   23.881063]      native  size : 78140160 sectors (40007 MB)
[   23.888754] ata1.00: Native size increased to 78140160 sectors
[   23.888763] ata1.00: ATA-6: HTS548040M9AT00, MG2OA5BA, max UDMA/100
[   23.888771] ata1.00: 78140160 sectors, multi 16: LBA 
[   23.897042] ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
[   23.897050] ata1.00: configured for UDMA/100
[   23.897062] scsi1 : ata_piix
[   24.216894] ata2.00: ATAPI, max UDMA/33
[   24.381463] ata2.00: configured for UDMA/33
[   24.381685] scsi 0:0:0:0: Direct-Access     ATA      HTS548040M9AT00  MG2O PQ: 0 ANSI: 5
[   24.381896] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[   24.381922] sda: Write Protect is off
[   24.381929] sda: Mode Sense: 00 3a 00 00
[   24.381964] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.382064] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[   24.382086] sda: Write Protect is off
[   24.382092] sda: Mode Sense: 00 3a 00 00
[   24.382126] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.382134]  sda: sda1
[   24.406879] sd 0:0:0:0: Attached scsi disk sda
[   24.413716] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8083N 0K03 PQ: 0 ANSI: 5
[   24.751688] JFS: nTxBlock = 4026, nTxLock = 32208
[   24.774935] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[   24.775282] SGI XFS Quota Management subsystem
[   24.831682] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   24.847786] fuse init (API version 7.8)
[   24.858934] loop: loaded (max 8 devices)
[   24.872912] Registering unionfs 20060916-2203
[   24.872921] unionfs: debugging is not enabled
[   24.885155] squashfs: version 3.2-UBUNTU (2007/05/16) Phillip Lougher
[   24.943653] Capability LSM initialized
[   25.050784] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[   25.050807] ACPI: Processor [CPU] (supports 8 throttling states)
[   25.055961] ACPI: Thermal Zone [THM0] (38 C)
[   26.407397] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   26.407455] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[   26.497302] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[   26.497311] e100: Copyright(c) 1999-2006 Intel Corporation
[   26.498597] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[   26.498606] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[   26.523028] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:0D:60:7F:87:3F
[   26.734289] Floppy drive(s): fd0 is 1.44M
[   26.806776] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[   26.806788] Uniform CD-ROM driver Revision: 3.20
[   26.806921] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   26.814504] FDC 0 is a National Semiconductor PC87306
[    9.332000] Time: acpi_pm clocksource has been installed.
[    9.900000] kjournald starting.  Commit interval 5 seconds
[    9.900000] EXT3-fs: mounted filesystem with ordered data mode.
[   10.044000] EXT3 FS on loop0, internal journal
[   13.392000] usb 3-2: new low speed USB device using uhci_hcd and address 2
[   13.568000] usb 3-2: configuration #1 chosen from 1 choice
[   26.160000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   26.184000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.004000] Linux agpgart interface v0.102 (c) Dave Jones
[   27.012000] intel_rng: FWH not detected
[   27.056000] iTCO_vendor_support: vendor-support=0
[   27.060000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   27.060000] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[   27.060000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   27.956000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
[   27.956000] Yenta: Using INTVAL to route CSC interrupts to PCI
[   27.956000] Yenta: Routing CardBus interrupts to PCI
[   27.956000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
[   27.964000] agpgart: Detected an Intel 855PM Chipset.
[   27.980000] agpgart: AGP aperture is 256M @ 0xd0000000
[   28.188000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[   28.188000] Socket status: 30000020
[   28.188000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[   28.188000] cs: IO port probe 0x4000-0x8fff: clean.
[   28.192000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[   28.192000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[   28.192000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]
[   28.192000] Yenta: Using INTVAL to route CSC interrupts to PCI
[   28.192000] Yenta: Routing CardBus interrupts to PCI
[   28.192000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
[   28.516000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[   28.516000] Socket status: 30000006
[   28.516000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[   28.516000] cs: IO port probe 0x4000-0x8fff: clean.
[   28.520000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[   28.520000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[   28.836000] pccard: CardBus card inserted into slot 0
[   28.896000] input: PC Speaker as /class/input/input2
[   28.968000] usbcore: registered new interface driver hiddev
[   29.076000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
[   29.076000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
[   29.076000] usbcore: registered new interface driver usbhid
[   29.076000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   29.436000] parport: PnPBIOS parport detected.
[   29.436000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[   29.852000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[   29.852000] serio: Synaptics pass-through port at isa0060/serio1/input0
[   29.892000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[   30.052000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   30.052000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   30.380000] irda_init()
[   30.380000] NET: Registered protocol family 23
[   30.512000] pnp: Device 00:0c activated.
[   30.512000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[   30.512000] nsc-ircc, chip->init
[   30.512000] nsc-ircc, Found chip at base=0x02e
[   30.512000] nsc-ircc, driver loaded (Dag Brattli)
[   30.512000] IrDA: Registered device irda0
[   30.512000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[   30.736000] cs: IO port probe 0x100-0x3af: clean.
[   30.736000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   30.736000] cs: IO port probe 0x820-0x8ff: clean.
[   30.736000] cs: IO port probe 0xc00-0xcf7: clean.
[   30.736000] cs: IO port probe 0xa00-0xaff: clean.
[   30.868000] cs: IO port probe 0x100-0x3af: clean.
[   30.868000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   30.868000] cs: IO port probe 0x820-0x8ff: clean.
[   30.868000] cs: IO port probe 0xc00-0xcf7: clean.
[   30.868000] cs: IO port probe 0xa00-0xaff: clean.
[   30.872000] intel8x0_measure_ac97_clock: measured 55127 usecs
[   30.872000] intel8x0: clocking to 48000
[   31.148000] lp0: using parport0 (interrupt-driven).
[   31.576000] EXT3 FS on loop0, internal journal
[   32.324000] kjournald starting.  Commit interval 5 seconds
[   32.328000] EXT3 FS on loop1, internal journal
[   32.328000] EXT3-fs: mounted filesystem with ordered data mode.
[   35.000000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   35.248000] input: TPPS/2 IBM TrackPoint as /class/input/input5
[   86.404000] Adding 244132k swap on /media/host/wubi/disks/swap.virtual.disk.  Priority:-1 extents:1 across:244132k
[   89.416000] ibm_acpi: ThinkPad EC firmware 1RHT71WW-3.04
[   89.416000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13
[   89.416000] ibm_acpi: http://ibm-acpi.sf.net/
[   89.588000] ACPI: Battery Slot [BAT0] (battery present)
[   89.672000] ACPI: ACPI Dock Station Driver 
[   89.720000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   89.744000] ACPI: AC Adapter [AC] (off-line)
[   89.816000] input: Power Button (FF) as /class/input/input6
[   89.816000] ACPI: Power Button (FF) [PWRF]
[   89.840000] input: Lid Switch as /class/input/input7
[   89.840000] ACPI: Lid Switch [LID]
[   89.852000] input: Sleep Button (CM) as /class/input/input8
[   89.852000] ACPI: Sleep Button (CM) [SLPB]
[   89.872000] Using specific hotkey driver
[   90.172000] pcc_acpi: loading...
[   97.760000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[   99.796000] ppdev: user-space parallel port driver
[  102.272000] NET: Registered protocol family 17
[  105.376000] IBM machine detected. Enabling interrupts during APM calls.
[  105.376000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[  105.376000] apm: overridden by ACPI.
[  107.148000] Non-volatile memory driver v1.2
[  107.408000] input: /usr/sbin/thinkpad-keys as /class/input/input9
[  108.196000] Bluetooth: Core ver 2.11
[  108.196000] NET: Registered protocol family 31
[  108.196000] Bluetooth: HCI device and connection manager initialized
[  108.196000] Bluetooth: HCI socket layer initialized
[  108.388000] Bluetooth: L2CAP ver 2.8
[  108.388000] Bluetooth: L2CAP socket layer initialized
[  108.408000] Bluetooth: RFCOMM socket layer initialized
[  108.408000] Bluetooth: RFCOMM TTY layer initialized
[  108.408000] Bluetooth: RFCOMM ver 1.8
[  110.228000] NET: Registered protocol family 10
[  110.232000] lo: Disabled Privacy Extensions
[  111.368000] [drm] Initialized drm 1.1.0 20060810
[  111.476000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[  111.480000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[  114.308000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[  114.308000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[  114.308000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[  114.968000] [drm] Setting GART location based on new memory map
[  114.968000] [drm] writeback test succeeded in 2 usecs
[  120.864000] eth0: no IPv6 routers present

3. Please run the command "sudo lspci -vvnn > lspci-vvnn.log" and attach the resulting file "lspci-vvnn.log" to this bug report.

00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03)
	Subsystem: IBM Unknown device [1014:0529]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Capabilities: [e4] Vendor Specific Information
	Capabilities: [a0] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1

00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 96
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: c0100000-c01fffff
	Prefetchable memory behind bridge: e0000000-e7ffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM Thinkpad R50e model 1634 [1014:052d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at 1800 [size=32]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM Thinkpad R50e model 1634 [1014:052d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1820 [size=32]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM Thinkpad R50e model 1634 [1014:052d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 11
	Region 4: I/O ports at 1840 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
	Subsystem: IBM Thinkpad R50e model 1634 [1014:052e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 11
	Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
	Capabilities: [58] Debug port

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
	I/O behind bridge: 00004000-00008fff
	Memory behind bridge: c0200000-cfffffff
	Prefetchable memory behind bridge: e8000000-efffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: IBM Thinkpad R50e model 1634 [1014:052d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 1860 [size=16]
	Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
	Subsystem: IBM Thinkpad R50e model 1634 [1014:052d]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1880 [size=32]

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
	Subsystem: IBM Unknown device [1014:0537]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: I/O ports at 18c0 [size=64]
	Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
	Subsystem: IBM Unknown device [1014:0524]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at 2400 [size=256]
	Region 1: I/O ports at 2000 [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] [1002:4c57] (prog-if 00 [VGA])
	Subsystem: IBM Unknown device [1014:0530]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 3000 [size=256]
	Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
		Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 CardBus bridge [0607]: Texas Instruments PCI1520 PC card Cardbus Controller [104c:ac55] (rev 01)
	Subsystem: IBM ThinkPad T30/T40 [1014:0512]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: e8000000-ebfff000 (prefetchable)
	Memory window 1: c4000000-c7fff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
	16-bit legacy interface ports at 0001

02:00.1 CardBus bridge [0607]: Texas Instruments PCI1520 PC card Cardbus Controller [104c:ac55] (rev 01)
	Subsystem: IBM ThinkPad T30/T40 [1014:0512]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 128 bytes
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at b1000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
	Memory window 0: ec000000-effff000 (prefetchable)
	Memory window 1: c8000000-cbfff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

02:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller [8086:103d] (rev 81)
	Subsystem: IBM Thinkpad R50e model 1634 [1014:0522]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at 8000 [size=64]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless [11ab:1faa] (rev 03)
	Subsystem: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless [11ab:1faa]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at c4000000 (32-bit, non-prefetchable) [disabled] [size=64K]
	Region 1: Memory at c4010000 (32-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Revision history for this message

Brian Murray (brian-murray) wrote on 2007-08-27:

#4

Thank you for taking the time to report this bug and helping to make Ubuntu better. This bug does not meet the criteria for a stable release update and is being marked as Won't Fix for this particular version of the kernel. You can learn more about the stable release update process at https://wiki.ubuntu.com/StableReleaseUpdates .
However, the issue that you reported is one that should be possible to test with the live environment of the Desktop CD of the development release - Gutsy Gibbon. It would help us greatly if you could test with it so we can work on getting it fixed in the actively developed kernel. You can find out more about the development release at http://www.ubuntu.com/testing/ .
If you do decide to test with the development release of Ubuntu please comment on this bug report and include at least the minimal information requested at http://wiki.ubuntu.com/KernelTeamBugPolicies . Thanks again and we appreciate your help.

Changed in linux-source-2.6.20:
assignee:	dufresnep → brian-murray
status:	Incomplete → Won't Fix

Revision history for this message

IuK (swen-aust-deactivatedaccount) wrote on 2007-08-29:

#5

uname-a.log Edit (82 bytes, text/plain)

Thank you for your help. digitus network DN-7001G-MV 802.11g Wireless LAN PC Card (PCMCIA) is still not detected in the latest release.

Revision history for this message

IuK (swen-aust-deactivatedaccount) wrote on 2007-08-29:

#6

version.log Edit (28 bytes, text/plain)

Revision history for this message

IuK (swen-aust-deactivatedaccount) wrote on 2007-08-29:

#7

dmesg.log Edit (27.5 KiB, text/plain)

Revision history for this message

IuK (swen-aust-deactivatedaccount) wrote on 2007-08-29:

#8

lspci-vvnn.log Edit (11.0 KiB, text/plain)

Revision history for this message

IuK (swen-aust-deactivatedaccount) wrote on 2007-08-29:

#9

digitus network DN-7001G-MV is this device:

03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless [11ab:1faa] (rev 03)
Subsystem: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless [11ab:1faa]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c4000000 (32-bit, non-prefetchable) [disabled] [size=64K]
Region 1: Memory at c4010000 (32-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Brian Murray (brian-murray) on 2007-08-29

Changed in linux-source-2.6.22:
assignee:	nobody → ubuntu-kernel-team
importance:	Undecided → Medium
status:	New → Triaged
Changed in linux-source-2.6.20:
assignee:	brian-murray → nobody

Revision history for this message

Chuck Short (zulcss) wrote on 2007-08-30:

#10

Looks like this card will only work with ndiswrapper.

https://help.ubuntu.com/community/WifiDocs/Device/TRENDnet_TEW-421P

Revision history for this message

Launchpad Janitor (janitor) wrote on 2008-12-23: Kernel team bugs

#11

Per a decision made by the Ubuntu Kernel Team, bugs will longer be assigned to the ubuntu-kernel-team in Launchpad as part of the bug triage process. The ubuntu-kernel-team is being unassigned from this bug report. Refer to https://wiki.ubuntu.com/KernelTeamBugPolicies for more information. Thanks.

Revision history for this message

Sergio Zanchetta (primes2h) wrote on 2009-05-04:

#12

The 18 month support period for Gutsy Gibbon 7.10 has reached its end of life -
http://www.ubuntu.com/news/ubuntu-7.10-eol . As a result, we are closing the
linux-source-2.6.22 kernel task. It would be helpful if you could test the
new Jaunty Jackalope 9.04 release and confirm if this issue remains -
http://www.ubuntu.com/getubuntu/releasenotes/904overview. If the issue still exists with the Jaunty
release, please update this report by changing the Status of the "linux (Ubuntu)"
task from "Incomplete" to "New". Also please be sure to run the command below
which will automatically gather and attach updated debug information to this
report. Thanks in advance.

apport-collect -p linux-image-2.6.28-11-generic 130369

Changed in linux-source-2.6.22 (Ubuntu):
status:	Triaged → Won't Fix
Changed in linux (Ubuntu):
status:	New → Incomplete

Revision history for this message

Jeremy Foshee (jeremyfoshee) wrote on 2010-05-25:

#13

This bug report was marked as Incomplete and has not had any updated comments for quite some time. As a result this bug is being closed. Please reopen if this is still an issue in the current Ubuntu release http://www.ubuntu.com/getubuntu/download . Also, please be sure to provide any requested information that may have been missing. To reopen the bug, click on the current status under the Status column and change the status back to "New". Thanks.

[This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.]

tags:	added: kj-expired
Changed in linux (Ubuntu):
status:	Incomplete → Expired

Ubuntu
linux-source-2.6.20 package

WLAN Card not detected

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

	Status	Importance	Assigned to
linux (Ubuntu)	Expired	Undecided	Unassigned
linux-source-2.6.20 (Ubuntu)	Won't Fix	Undecided	Unassigned
linux-source-2.6.22 (Ubuntu)	Won't Fix	Medium	Unassigned

Ubuntulinux-source-2.6.20 package

WLAN Card not detected

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntu
linux-source-2.6.20 package