[needs-packaging] MSHV

MSHV Meteor Scatter Software
MSHV Supported working modes: JTMSK JTMS FSK441 FSK315 ISCAT JT6M
Developed by LZ2HV - Christo
Tested by SP9HWY - Jurek and G0LFF - Dick
Ideas about appearance OZ2M - Bo
The program was borrowed from the open source software K1JT. Only decoders and generators were used from K1JT - WSJT and were rewritten to C ++. Almost the same location of controls was used for easy operation. The software is fully compatible with the modes in WSJT software. The visual interface is QT4.6.8. All required libraries are compiled statically and are embedded in the body of the software. Additional libraries are not necessary. All settings and configurations happen immediately and do not need to be restarted, for example changing the sound settings or rig control.

Information:

    JTMSK For meteor scatter. Character transmission rate 286 cps.
    JTMS For meteor scatter. Character transmission rate 197 cps.
    FSK441 For meteor scatter. Character transmission rate 147 cps.
    FSK315 For meteor scatter. Character transmission rate 105 cps.
    ISCAT Optimized for meteor and ionospheric scatter at 6 meters. Character transmission rate 16.15 or 32.3 cps.
    JT6M Optimized for meteor and ionospheric scatter at 6 meters. Character transmission rate 14.4 cps.

System Requirements:

    SSB transceiver and antenna for one or more VHF/UHF/SHF bands.
    Computer running the Microsoft Windows Xp, Windows 7 32 or 64 Bit.
    For Linux QT4.8.6 and Alsa librarys.
    1 GHz or faster CPU and 128 MB of available RAM.
    The monitor with minimum resolution 1024x768 or for notebooks 1366x768 (more is better).
    Computer-to-radio interface using a serial port for T/R switching, or VOX control.
    Audio input and output devices supported by the operating system (Sound card full duplex).
    Audio or equivalent USB connections between transceiver and computer.
    A means for synchronizing the computer clock to UTC within ±1 s.

source:

http://lz2hv.org/mshv