straight boot into EDGY from power off never succeeds

Laptop MSI 1039; edgy eft up to date; generic kernel
to reproduce: power is on (not battery)
press power on switch -- always hangs in this mode (i.e. normal boot)
if regular boot (non-quiet, splash, multi) gets to loading hardware drivers and hangs
if recovery/single and I let it sit at grub menu for awhile sometimes works
if recovery/single and boot in quick hangs on an hda dma error message
to boot I have to unplug power and charger connector (not certain if that is important or not) and let grub menu hang out for awhile (30 sec?) then boot into recovery; if successful I then reboot ... or ...
dual boot WinXP always boots clean (!!) so boot into WinXP then reboot to ubuntu
LAPTOP ALWAYS REBOOTS OK (restarts) from either WinXP or any flavor of Linux

I'll be glad to email/phone someone who is trying to debug/fix this

My dmesg:
[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
[17179569.184000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
[17179569.184000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 1151MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 524240
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 294864 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 MSI ) @ 0x000f9730
[17179569.184000] ACPI: RSDT (v001 MSI 1039 0x05102006 MSFT 0x00000097) @ 0x7ffd0000
[17179569.184000] ACPI: FADT (v002 MSI 1039 0x05102006 MSFT 0x00000097) @ 0x7ffd0200
[17179569.184000] ACPI: MADT (v001 MSI 1039 0x05102006 MSFT 0x00000097) @ 0x7ffd0390
[17179569.184000] ACPI: MCFG (v001 MSI 1039 0x05102006 MSFT 0x00000097) @ 0x7ffd03f0
[17179569.184000] ACPI: SSDT (v001 ATI ATIPATCH 0x00000001 INTL 0x02002026) @ 0x7ffd3eb0
[17179569.184000] ACPI: OEMB (v001 MSI 1039 0x05102006 MSFT 0x00000097) @ 0x7ffde040
[17179569.184000] ACPI: DSDT (v001 MSI 1039 0x05102006 INTL 0x02002026) @ 0x00000000
[17179569.184000] ATI board detected. Disabling timer routing over 8254.
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 16
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ff80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=5833e8c8-2688-43ca-bf36-bffa44aac93c ro splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2189.299 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.344000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.344000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.404000] Memory: 2068064k/2096960k available (1910k kernel code, 27668k reserved, 1070k data, 308k init, 1179456k highmem)
[17179569.404000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.484000] Calibrating delay using timer specific routine.. 4384.76 BogoMIPS (lpj=8769524)
[17179569.484000] Security Framework v1.0.0 initialized
[17179569.484000] SELinux: Disabled at boot.
[17179569.484000] Mount-cache hash table entries: 512
[17179569.484000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.484000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.484000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.484000] CPU: L2 Cache: 1024K (64 bytes/line)
[17179569.484000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179569.484000] Checking 'hlt' instruction... OK.
[17179569.500000] SMP alternatives: switching to UP code
[17179569.500000] Freeing SMP alternatives: 16k freed
[17179569.500000] checking if image is initramfs... it is
[17179569.992000] Freeing initrd memory: 6681k freed
[17179569.992000] ACPI: Core revision 20060707
[17179569.992000] ACPI: Looking for DSDT ... not found!
[17179569.996000] CPU0: AMD Turion(tm) 64 Mobile Technology MT-40 stepping 02
[17179569.996000] Total of 1 processors activated (4384.76 BogoMIPS).
[17179569.996000] ENABLING IO-APIC IRQs
[17179569.996000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.140000] Brought up 1 CPUs
[17179570.140000] migration_cost=0
[17179570.140000] NET: Registered protocol family 16
[17179570.140000] EISA bus registered
[17179570.140000] ACPI: bus type pci registered
[17179570.140000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[17179570.140000] PCI: Not using MMCONFIG.
[17179570.140000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[17179570.140000] PCI: Using configuration type 1
[17179570.140000] Setting up standard PCI resources
[17179572.348000] ACPI: Interpreter enabled
[17179572.348000] ACPI: Using IOAPIC for interrupt routing
[17179572.348000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.348000] PCI: Probing PCI hardware (bus 00)
[17179572.348000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[17179572.348000] Boot video device is 0000:01:00.0
[17179572.348000] PCI: Transparent bridge - 0000:00:14.4
[17179572.348000] PCI: Bus #06 (-#09) is hidden behind transparent bridge #05 (-#06) (try 'pci=assign-busses')
[17179572.348000] Please report the result to linux-kernel to fix this permanently
[17179572.348000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.356000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[17179572.356000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[17179572.360000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[17179572.360000] ACPI: Embedded Controller [EC] (gpe 6) interrupt mode.
[17179572.364000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[17179572.364000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179572.368000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179572.368000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179572.368000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179572.368000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179572.368000] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[17179572.372000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179572.372000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179572.372000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.372000] pnp: PnP ACPI init
[17179572.372000] pnp: PnP ACPI: found 11 devices
[17179572.372000] PnPBIOS: Disabled by ACPI PNP
[17179572.372000] PCI: Using ACPI for IRQ routing
[17179572.372000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179572.392000] PCI: Bridge: 0000:00:02.0
[17179572.392000] IO window: 8000-8fff
[17179572.392000] MEM window: fd800000-fd8fffff
[17179572.392000] PREFETCH window: bbf00000-dbefffff
[17179572.392000] PCI: Bridge: 0000:00:04.0
[17179572.392000] IO window: 9000-9fff
[17179572.392000] MEM window: fd900000-fe0fffff
[17179572.392000] PREFETCH window: dbf00000-ddefffff
[17179572.392000] PCI: Bridge: 0000:00:05.0
[17179572.392000] IO window: a000-afff
[17179572.392000] MEM window: fe100000-fe1fffff
[17179572.392000] PREFETCH window: disabled.
[17179572.392000] PCI: Bus 6, cardbus bridge: 0000:05:04.0
[17179572.392000] IO window: 0000b000-0000b0ff
[17179572.392000] IO window: 0000b400-0000b4ff
[17179572.392000] PREFETCH window: 8a000000-8bffffff
[17179572.392000] MEM window: 8c000000-8dffffff
[17179572.392000] PCI: Bridge: 0000:00:14.4
[17179572.392000] IO window: b000-bfff
[17179572.392000] MEM window: fe200000-feafffff
[17179572.392000] PREFETCH window: ddf00000-dfefffff
[17179572.392000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179572.392000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179572.392000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[17179572.392000] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 19 (level, low) -> IRQ 177
[17179572.392000] NET: Registered protocol family 2
[17179572.432000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.432000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[17179572.432000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179572.432000] TCP: Hash tables configured (established 262144 bind 65536)
[17179572.432000] TCP reno registered
[17179572.432000] audit: initializing netlink socket (disabled)
[17179572.432000] audit(1160979494.432:1): initialized
[17179572.432000] highmem bounce pool size: 64 pages
[17179572.432000] VFS: Disk quotas dquot_6.5.1
[17179572.436000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.436000] Initializing Cryptographic API
[17179572.436000] io scheduler noop registered
[17179572.436000] io scheduler anticipatory registered
[17179572.436000] io scheduler deadline registered
[17179572.436000] io scheduler cfq registered (default)
[17179572.436000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179572.436000] pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
[17179572.436000] assign_interrupt_mode Found MSI capability
[17179572.436000] Allocate Port Service[0000:00:02.0:pcie00]
[17179572.436000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179572.436000] pcie_portdrv_probe->Dev[5a36:1002] has invalid IRQ. Check vendor BIOS
[17179572.436000] assign_interrupt_mode Found MSI capability
[17179572.436000] Allocate Port Service[0000:00:04.0:pcie00]
[17179572.436000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[17179572.436000] pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS
[17179572.436000] assign_interrupt_mode Found MSI capability
[17179572.436000] Allocate Port Service[0000:00:05.0:pcie00]
[17179572.436000] isapnp: Scanning for PnP cards...
[17179572.792000] isapnp: No Plug & Play device found
[17179572.808000] Real Time Clock Driver v1.12ac
[17179572.808000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179572.808000] mice: PS/2 mouse device common for all mice
[17179572.808000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179572.808000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.808000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179572.808000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179572.808000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179572.808000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179572.808000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179572.808000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179572.808000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179572.808000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.808000] EISA: Probing bus 0 at eisa.0
[17179572.808000] Cannot allocate resource for EISA slot 8
[17179572.808000] EISA: Detected 0 cards.
[17179572.808000] TCP bic registered
[17179572.808000] NET: Registered protocol family 1
[17179572.808000] NET: Registered protocol family 8
[17179572.808000] NET: Registered protocol family 20
[17179572.808000] Using IPI No-Shortcut mode
[17179572.808000] ACPI: (supports S0 S1 S3 S4 S5)
[17179572.808000] Freeing unused kernel memory: 308k freed
[17179573.408000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.896000] Capability LSM initialized
[17179573.936000] ACPI: duty_cycle spans bit 4
[17179573.936000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179573.936000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179573.936000] ACPI: Getting cpuindex for acpiid 0x2
[17179573.940000] ACPI: Thermal Zone [THRM] (58 C)
[17179574.308000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[17179574.308000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 217
[17179574.308000] ATIIXP: chipset revision 128
[17179574.308000] ATIIXP: not 100% native mode: will probe irqs later
[17179574.308000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
[17179574.308000] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
[17179574.308000] Probing IDE interface ide0...
[17179574.596000] hda: TOSHIBA MK1032GAX, ATA DISK drive
[17179575.268000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.268000] Probing IDE interface ide1...
[17179576.004000] hdc: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
[17179576.340000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.344000] hda: max request size: 512KiB
[17179576.368000] hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100)
[17179576.368000] hda: cache flushes supported
[17179576.368000] hda: hda1 hda2 hda3 hda4
[17179576.408000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.408000] Uniform CD-ROM driver Revision: 3.20
[17179576.728000] usbcore: registered new driver usbfs
[17179576.728000] usbcore: registered new driver hub
[17179576.728000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179576.728000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 177
[17179576.728000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[17179576.728000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[17179576.760000] ieee1394: Initialized config rom entry `ip1394'
[17179576.768000] ohci_hcd 0000:00:13.0: irq 177, io mem 0xfebff000
[17179576.828000] usb usb1: configuration #1 chosen from 1 choice
[17179576.828000] hub 1-0:1.0: USB hub found
[17179576.828000] hub 1-0:1.0: 4 ports detected
[17179576.932000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 177
[17179576.932000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[17179576.932000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[17179576.960000] ohci_hcd 0000:00:13.1: irq 177, io mem 0xfebfe000
[17179577.020000] usb usb2: configuration #1 chosen from 1 choice
[17179577.020000] hub 2-0:1.0: USB hub found
[17179577.020000] hub 2-0:1.0: 4 ports detected
[17179577.124000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 177
[17179577.124000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[17179577.124000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[17179577.124000] ehci_hcd 0000:00:13.2: irq 177, io mem 0xfebfd000
[17179577.124000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.124000] usb usb3: configuration #1 chosen from 1 choice
[17179577.124000] hub 3-0:1.0: USB hub found
[17179577.124000] hub 3-0:1.0: 8 ports detected
[17179577.228000] ACPI: PCI Interrupt 0000:05:04.4[A] -> GSI 19 (level, low) -> IRQ 177
[17179577.284000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[feafd000-feafd7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[17179577.356000] Attempting manual resume
[17179577.364000] JFS: nTxBlock = 8192, nTxLock = 65536
[17179578.560000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000b104ed00]
[17179595.800000] Linux agpgart interface v0.101 (c) Dave Jones
[17179595.868000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179595.868000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179596.588000] input: PC Speaker as /class/input/input1
[17179596.788000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 225
[17179596.788000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[17179596.788000] eth0: Identified chip type is 'RTL8168B/8111B'.
[17179596.788000] eth0: r10001.02, the Linux device driver for Realtek Ethernet Controllers at 0xa800, 00:16:17:4f:5c:72, IRQ 225
[17179596.788000] eth0: Auto-negotiation Enabled.
[17179604.476000] Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
[17179604.476000] Driver version:1.02
[17179604.476000] Released date:2006/02/23
[17179604.476000] Link Status:Not Linked
[17179604.476000] I/O Base:0xA800(I/O port)
[17179604.476000] IRQ:225
[17179604.484000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[17179604.820000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 217
[17179604.824000] ts: Compaq touchscreen protocol output
[17179604.908000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[17179604.908000] sdhci: Copyright(c) Pierre Ossman
[17179605.204000] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[17179605.836000] sdhci: SDHCI controller found at 0000:05:04.2 [1217:7120] (rev 1)
[17179605.836000] ACPI: PCI Interrupt 0000:05:04.2[A] -> GSI 19 (level, low) -> IRQ 177
[17179605.836000] sdhci:slot0: Unknown controller version (16). You may experience problems.
[17179605.836000] mmc0: SDHCI at 0xfeaffc00 irq 177 PIO
[17179605.836000] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 19 (level, low) -> IRQ 177
[17179605.836000] Yenta: CardBus bridge found at 0000:05:04.0 [1462:0391]
[17179605.836000] Yenta O2: res at 0x94/0xD4: 00/ea
[17179605.836000] Yenta O2: enabling read prefetch/write burst
[17179605.964000] Yenta: ISA IRQ mask 0x0eb8, PCI irq 177
[17179605.964000] Socket status: 30000006
[17179605.964000] Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09
[17179605.964000] pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff
[17179605.964000] cs: IO port probe 0xb000-0xbfff: clean.
[17179605.964000] pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff
[17179605.964000] pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff
[17179606.316000] cs: IO port probe 0x100-0x3af: clean.
[17179606.316000] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
[17179606.320000] cs: IO port probe 0x820-0x8ff: excluding 0x830-0x837
[17179606.320000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[17179606.320000] cs: IO port probe 0xa00-0xaff: clean.
[17179606.440000] lp: driver loaded but no devices found
[17179606.460000] SCSI subsystem initialized
[17179606.480000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179606.480000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179606.548000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179606.548000] [fglrx] Maximum main memory to use for locked dma buffers: 1899 MBytes.
[17179606.548000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
[17179606.584000] Adding 506032k swap on /dev/disk/by-uuid/b08858f7-109f-436a-a0fc-99a5884ba237. Priority:-1 extents:1 across:506032k
[17179607.732000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179607.732000] md: bitmap version 4.39
[17179608.080000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: <email address hidden>
[17179609.940000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179609.992000] NTFS volume version 3.1.
[17179611.952000] NET: Registered protocol family 17
[17179614.304000] ieee80211_crypt: registered algorithm 'NULL'
[17179614.304000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179614.304000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[17179618.984000] ACPI: AC Adapter [ADP1] (off-line)
[17179619.020000] ACPI: Battery Slot [BAT1] (battery present)
[17179619.032000] ACPI: Power Button (FF) [PWRF]
[17179619.032000] ACPI: Lid Switch [LID0]
[17179619.032000] ACPI: Sleep Button (CM) [SLPB]
[17179619.032000] ACPI: Power Button (CM) [PWRB]
[17179619.152000] ibm_acpi: ec object not found
[17179619.176000] pcc_acpi: loading...
[17179619.632000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179619.636000] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xa (1300 mV)
[17179619.636000] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xc (1250 mV)
[17179619.636000] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xe (1200 mV)
[17179619.636000] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0x10 (1150 mV)
[17179619.636000] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
[17179619.636000] cpu_init done, current fid 0xe, vid 0xa
[17179624.664000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 233
[17179627.144000] [fglrx] total GART = 134217728
[17179627.144000] [fglrx] free GART = 118226944
[17179627.144000] [fglrx] max single GART = 118226944
[17179627.144000] [fglrx] total LFB = 262107136
[17179627.144000] [fglrx] free LFB = 253915136
[17179627.144000] [fglrx] max single LFB = 253915136
[17179627.144000] [fglrx] total Inv = 0
[17179627.144000] [fglrx] free Inv = 0
[17179627.144000] [fglrx] max single Inv = 0
[17179627.144000] [fglrx] total TIM = 0
[17179634.428000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179634.428000] apm: overridden by ACPI.
[17179637.652000] NET: Registered protocol family 10
[17179637.652000] lo: Disabled Privacy Extensions
[17179637.652000] IPv6 over IPv4 tunneling driver
[17179638.452000] hda-intel: Invalid position buffer, using LPIB read method instead.
[17179646.400000] Installing knfsd (copyright (C) 1996 <email address hidden>).
[17179646.596000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[17179646.616000] NFSD: starting 90-second grace period
[17179655.984000] eth0: no IPv6 routers present
[17179656.772000] Bluetooth: Core ver 2.8
[17179656.772000] NET: Registered protocol family 31
[17179656.772000] Bluetooth: HCI device and connection manager initialized
[17179656.772000] Bluetooth: HCI socket layer initialized
[17179656.828000] Bluetooth: L2CAP ver 2.8
[17179656.828000] Bluetooth: L2CAP socket layer initialized
[17179656.832000] Bluetooth: RFCOMM socket layer initialized
[17179656.832000] Bluetooth: RFCOMM TTY layer initialized
[17179656.832000] Bluetooth: RFCOMM ver 1.7
[17180655.268000] psmouse.c: Wheel Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
[17180675.628000] ohci_hcd 0000:00:13.0: wakeup
[17180676.012000] usb 1-4: new full speed USB device using ohci_hcd and address 2
[17180676.216000] usb 1-4: configuration #1 chosen from 1 choice
[17180676.820000] prism2usb_init: prism2_usb.o: 0.2.5 Loaded
[17180676.820000] prism2usb_init: dev_info is: prism2_usb
[17180676.848000] usbcore: registered new driver prism2_usb
[17180677.356000] hfa384x_usbin_rx: Received frame on unsupported port=1
[17180677.360000] ident: nic h/w: id=0x8010 1.0.0
[17180677.360000] ident: pri f/w: id=0x15 1.1.3
[17180677.360000] ident: sta f/w: id=0x1f 1.7.1
[17180677.364000] MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
[17180677.364000] CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
[17180677.368000] PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4
[17180677.368000] STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12
[17180677.372000] PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
[17180677.372000] STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
[17180677.376000] STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
[17180677.376000] Prism2 card SN: \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
[17180677.988000] linkstatus=DISCONNECTED (unhandled)
[17180677.988000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17180678.552000] linkstatus=CONNECTED
[17180678.564000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17180681.268000] ohci_hcd 0000:00:13.1: wakeup
[17180681.652000] usb 2-3: new low speed USB device using ohci_hcd and address 2
[17180681.864000] usb 2-3: configuration #1 chosen from 1 choice
[17180682.092000] usbcore: registered new driver hiddev
[17180682.108000] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /class/input/input3
[17180682.108000] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:13.1-3
[17180682.108000] usbcore: registered new driver usbhid
[17180682.108000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17180685.264000] atkbd.c: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
[17180685.264000] atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.
[17180685.456000] atkbd.c: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
[17180685.456000] atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.
[17180688.796000] wlan0: no IPv6 routers present
[17189210.684000] pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
[17189210.684000] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
[17189210.684000] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.