/usr/share/checkbox/scripts/suspend_test fails
| Affects | Status | Importance | Assigned to | Milestone | |
|---|---|---|---|---|---|
| linux (Ubuntu) |
Expired
|
Undecided
|
Unassigned | ||
Bug Description
Suspend and resume seem to work fine from the system menu with the laptop plugged in.
Same for hibernate.
however /usr/share/
TEST 1 -- suspend triggered via dbus message fails with the message
SUSPEND FAILED, did not go to sleep
TEST 2 -- suspend with AC disconnected seems to fail - the system suspends (after a "critically low battery" message on a fully recharged battery), then resumes, then immediately suspends again and does not resume. Pressing the system power button however successfully resumes.
I suspended the testing at this point
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: linux-image-
ProcVersionSign
Uname: Linux 3.0.0-10-generic i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'IXP'/'ATI IXP rev 0 with ALC250 at 0xd0004400, irq 17'
Mixer name : 'Realtek ALC250 rev 2'
Components : 'AC97a:414c4752'
Controls : 33
Simple ctrls : 21
Card1.Amixer.info:
Card hw:1 'Modem'/'ATI IXP Modem rev 1 at 0xd0004800, irq 17'
Mixer name : 'Silicon Laboratory Si3036,8 rev 7'
Components : 'AC97m:53494c27'
Controls : 3
Simple ctrls : 3
Card1.Codecs.
1-1/0: Silicon Laboratory Si3036,8 rev 7
Extended modem ID: codec=1 LIN1
Modem status : GPIO MREF ADC1 DAC1 PRE(ADC2) PRF(DAC2) PRG(HADC) PRH(HDAC)
Line1 rate : 8000Hz
Date: Mon Sep 5 12:01:47 2011
HibernationDevice: RESUME=
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Beta i386 (20110901)
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: TOSHIBA Satellite A70
PccardctlIdent:
Socket 0:
no product info available
PccardctlStatus:
Socket 0:
no card
ProcEnviron:
LANGUAGE=en_CA:en
PATH=(custom, no user)
LANG=en_CA.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=
RelatedPackageV
linux-
linux-
linux-firmware 1.60
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 11/16/2004
dmi.bios.vendor: TOSHIBA
dmi.bios.version: V1.50
dmi.board.name: EDW10
dmi.board.vendor: TOSHIBA
dmi.board.version: Null
dmi.chassis.
dmi.chassis.type: 10
dmi.chassis.vendor: TOSHIBA
dmi.chassis.
dmi.modalias: dmi:bvnTOSHIBA:
dmi.product.name: Satellite A70
dmi.product.
dmi.sys.vendor: TOSHIBA
| Chris Hermansen (c-hermansen) wrote | #1 |
| Changed in linux (Ubuntu): | |
| status: | New → Confirmed |
| Brad Figg (brad-figg) wrote Test with newer development kernel (3.0.0-11.18) | #2 |
| Changed in linux (Ubuntu): | |
| status: | Confirmed → Incomplete |
| tags: | added: kernel-request-3.0.0-11.18 |
| Launchpad Janitor (janitor) wrote | #3 |
| Changed in linux (Ubuntu): | |
| status: | Incomplete → Expired |
Thank you for taking the time to file a bug report on this issue.
However, given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request.
We have noted that there is a newer version of the development kernel currently in the release pocket than the one you tested when this issue was found. Please test again with the newer kernel and indicate in the bug if this issue still exists or not.
If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released.
Thank you for your help.