Here is dmsg from my PC and my boot disk in BIOS is /dev/sda1 [ 0.000000] Bootdata ok (command line is root=/dev/sda3 ro quiet splash) [ 0.000000] Linux version 2.6.15-21-amd64-generic (buildd@crested) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Apr 21 16:42:20 UTC 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f8320 [ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff3040 [ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff30c0 [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000007fff98c0 [ 0.000000] ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x000000007fff9a00 [ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff9b00 [ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff9800 [ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 [ 0.000000] Using 63 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] On node 0 totalpages: 516085 [ 0.000000] DMA zone: 3020 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 513065 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ 4284000000 size 32 MB [ 0.000000] Aperture from northbridge cpu 0 too small (32 MB) [ 0.000000] No AGP bridge found [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/sda3 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 2320.230 MHz processor. [ 29.658196] Console: colour VGA+ 80x25 [ 29.659028] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 29.660264] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 29.674464] Memory: 2054116k/2097088k available (2131k kernel code, 42584k reserved, 751k data, 180k init) [ 29.734497] Calibrating delay using timer specific routine.. 4645.04 BogoMIPS (lpj=2322524) [ 29.734536] Security Framework v1.0.0 initialized [ 29.734540] SELinux: Disabled at boot. [ 29.734556] Mount-cache hash table entries: 256 [ 29.734629] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 29.734631] CPU: L2 Cache: 512K (64 bytes/line) [ 29.734634] CPU 0(1) -> Node 0 -> Core 0 [ 29.734639] mtrr: v2.0 (20020519) [ 29.734644] SMP alternatives: switching to UP code [ 29.734827] checking if image is initramfs... it is [ 30.187743] Freeing initrd memory: 6877k freed [ 30.193861] ACPI: Looking for DSDT ... not found! [ 30.208321] Using local APIC timer interrupts. [ 30.251391] Detected 14.501 MHz APIC timer. [ 30.251434] Brought up 1 CPUs [ 30.251474] time.c: Using PIT/TSC based timekeeping. [ 30.251475] testing NMI watchdog ... OK. [ 30.261680] NET: Registered protocol family 16 [ 30.261697] ACPI: bus type pci registered [ 30.262014] PCI: Using configuration type 1 [ 30.264805] PCI: Using MMCONFIG at e0000000 [ 30.265235] ACPI: Subsystem revision 20051216 [ 30.272076] ACPI: Interpreter enabled [ 30.272078] ACPI: Using IOAPIC for interrupt routing [ 30.272560] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 30.272562] PCI: Probing PCI hardware (bus 00) [ 30.278189] PCI: Transparent bridge - 0000:00:09.0 [ 30.278400] Boot video device is 0000:05:00.0 [ 30.278475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 30.365476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 30.367370] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 30.367759] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 30.368154] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 30.368545] ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 30.368936] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 30.369321] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 30.369706] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 30.370101] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 30.370495] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 30.370879] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 30.371273] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 30.371658] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 30.372050] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 30.372449] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 30.372843] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 30.373244] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 30.373578] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 30.373914] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 30.374243] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [ 30.374580] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. [ 30.374918] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 30.375353] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 30.375785] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 30.376222] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 30.376653] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 30.377095] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 30.377524] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 30.377958] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 30.378388] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 30.378826] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 30.379271] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 30.379711] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 30.382829] Linux Plug and Play Support v0.97 (c) Adam Belay [ 30.382838] pnp: PnP ACPI init [ 30.388479] pnp: PnP ACPI: found 11 devices [ 30.388490] PCI: Using ACPI for IRQ routing [ 30.388493] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 30.388569] PCI-DMA: Disabling IOMMU. [ 30.388907] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved [ 30.388909] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [ 30.388912] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [ 30.388915] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved [ 30.388917] pnp: 00:00: ioport range 0x4800-0x487f has been reserved [ 30.388919] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved [ 30.389053] PCI: Bridge: 0000:00:09.0 [ 30.389055] IO window: b000-bfff [ 30.389058] MEM window: fde00000-fdefffff [ 30.389061] PREFETCH window: fdf00000-fdffffff [ 30.389064] PCI: Bridge: 0000:00:0b.0 [ 30.389066] IO window: a000-afff [ 30.389069] MEM window: fdd00000-fddfffff [ 30.389072] PREFETCH window: fdc00000-fdcfffff [ 30.389074] PCI: Bridge: 0000:00:0c.0 [ 30.389077] IO window: 9000-9fff [ 30.389080] MEM window: fdb00000-fdbfffff [ 30.389082] PREFETCH window: fda00000-fdafffff [ 30.389085] PCI: Bridge: 0000:00:0d.0 [ 30.389087] IO window: 8000-8fff [ 30.389090] MEM window: fd900000-fd9fffff [ 30.389093] PREFETCH window: fd800000-fd8fffff [ 30.389097] PCI: Bridge: 0000:00:0e.0 [ 30.389099] IO window: 7000-7fff [ 30.389102] MEM window: fa000000-fcffffff [ 30.389105] PREFETCH window: d0000000-dfffffff [ 30.389112] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 30.389119] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 30.389126] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 30.389132] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 30.389138] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 30.389291] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 30.389512] audit: initializing netlink socket (disabled) [ 30.389519] audit(1147644029.732:1): initialized [ 30.389613] VFS: Disk quotas dquot_6.5.1 [ 30.389628] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 30.389663] Initializing Cryptographic API [ 30.389665] io scheduler noop registered [ 30.389671] io scheduler anticipatory registered [ 30.389676] io scheduler deadline registered [ 30.389686] io scheduler cfq registered [ 30.389944] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 30.389948] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 30.389970] assign_interrupt_mode Found MSI capability [ 30.390002] Allocate Port Service[pcie00] [ 30.390029] Allocate Port Service[pcie03] [ 30.390055] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 30.390058] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 30.390079] assign_interrupt_mode Found MSI capability [ 30.390099] Allocate Port Service[pcie00] [ 30.390120] Allocate Port Service[pcie03] [ 30.390145] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 30.390147] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 30.390169] assign_interrupt_mode Found MSI capability [ 30.390189] Allocate Port Service[pcie00] [ 30.390208] Allocate Port Service[pcie03] [ 30.390235] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 30.390237] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 30.390257] assign_interrupt_mode Found MSI capability [ 30.390276] Allocate Port Service[pcie00] [ 30.390301] Allocate Port Service[pcie03] [ 30.400526] Linux agpgart interface v0.101 (c) Dave Jones [ 30.400590] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 30.400593] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 30.945580] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 30.946662] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 30.946688] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 30.946784] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.948103] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.948421] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 30.948452] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 30.948455] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 30.948631] mice: PS/2 mouse device common for all mice [ 30.956114] NET: Registered protocol family 2 [ 30.967875] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 30.968163] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 30.970635] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 30.971115] TCP: Hash tables configured (established 262144 bind 65536) [ 30.971117] TCP reno registered [ 30.971184] TCP bic registered [ 30.971190] NET: Registered protocol family 1 [ 30.971195] NET: Registered protocol family 8 [ 30.971197] NET: Registered protocol family 20 [ 30.971294] ACPI wakeup devices: [ 30.971296] HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 [ 30.971300] ACPI: (supports S0 S3 S4 S5) [ 30.971366] Freeing unused kernel memory: 180k freed [ 31.400025] input: AT Translated Set 2 keyboard as /class/input/input0 [ 31.437802] vga16fb: initializing [ 31.437806] vga16fb: mapped to 0xffff8100000a0000 [ 31.615600] Console: switching to colour frame buffer device 80x25 [ 31.615604] fb0: VGA16 VGA frame buffer device [ 32.761438] Capability LSM initialized [ 32.780524] ACPI: Fan [FAN] (on) [ 32.784321] ACPI: Thermal Zone [THRM] (32 C) [ 33.229019] SCSI subsystem initialized [ 33.230185] libata version 1.20 loaded. [ 33.231432] sata_nv 0000:00:08.0: version 0.8 [ 33.231902] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 33.231907] GSI 16 sharing vector 0xD9 and IRQ 16 [ 33.231912] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 217 [ 33.231982] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 33.232034] ata1: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 217 [ 33.232057] ata2: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 217 [ 33.586918] ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023 88:407f 93:0000 [ 33.586922] ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48 [ 33.591470] sata_get_dev_handle: SATA dev addr=0x80000, handle=0xffff810037fe2800 [ 33.599738] nv_sata: Primary device added [ 33.599740] nv_sata: Primary device removed [ 33.599741] nv_sata: Secondary device added [ 33.599742] nv_sata: Secondary device removed [ 33.599745] ata1: dev 0 configured for UDMA/133 [ 33.604619] sata_get_dev_handle: SATA dev addr=0x80000, handle=0xffff810037fe2800 [ 33.612621] scsi0 : sata_nv [ 33.813590] ata2: no device found (phy stat 00000000) [ 33.813593] scsi1 : sata_nv [ 33.814078] Vendor: ATA Model: ST3160812AS Rev: 3.AA [ 33.814085] Type: Direct-Access ANSI SCSI revision: 05 [ 33.815439] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 33.815455] NFORCE-CK804: chipset revision 162 [ 33.815457] NFORCE-CK804: not 100% native mode: will probe irqs later [ 33.815460] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. [ 33.815464] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller [ 33.815471] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA [ 33.815479] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA [ 33.815485] Probing IDE interface ide0... [ 33.827860] Driver 'sd' needs updating - please use bus_type methods [ 33.828454] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [ 33.828466] SCSI device sda: drive cache: write back [ 33.830642] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [ 33.830654] SCSI device sda: drive cache: write back [ 33.830658] sda: sda1 sda2 < sda5 sda6 > sda3 [ 33.874909] sd 0:0:0:0: Attached scsi disk sda [ 34.491159] hda: _NEC DVD_RW ND-4550A, ATAPI CD/DVD-ROM drive [ 35.102897] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 35.104222] Probing IDE interface ide1... [ 35.367458] hdc: Maxtor 6E040L0, ATA DISK drive [ 35.979101] ide1 at 0x170-0x177,0x376 on irq 15 [ 35.990808] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 35.990814] Uniform CD-ROM driver Revision: 3.20 [ 35.994015] hdc: max request size: 128KiB [ 35.994123] hdc: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133) [ 35.994244] hdc: cache flushes supported [ 35.994363] hdc: hdc1 [ 36.224457] usbcore: registered new driver usbfs [ 36.224475] usbcore: registered new driver hub [ 36.225674] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 36.225679] GSI 17 sharing vector 0xE1 and IRQ 17 [ 36.225686] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 225 [ 36.225748] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 36.225752] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 36.225777] ehci_hcd 0000:00:02.1: debug port 1 [ 36.225781] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 36.225925] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 36.225934] ehci_hcd 0000:00:02.1: irq 225, io mem 0xfe02e000 [ 36.225941] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 36.226743] hub 1-0:1.0: USB hub found [ 36.226749] hub 1-0:1.0: 10 ports detected [ 36.227334] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 36.227741] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 36.227744] GSI 18 sharing vector 0xE9 and IRQ 18 [ 36.227749] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233 [ 36.227810] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 36.227814] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 36.245936] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48. [ 36.328292] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 36.328302] ohci_hcd 0000:00:02.0: irq 233, io mem 0xfe02f000 [ 36.380741] hub 2-0:1.0: USB hub found [ 36.380750] hub 2-0:1.0: 10 ports detected [ 36.482446] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 36.482451] GSI 19 sharing vector 0x32 and IRQ 19 [ 36.482456] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 50 [ 36.482461] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 36.688320] usb 1-8: new high speed USB device using ehci_hcd and address 3 [ 36.802647] hub 1-8:1.0: USB hub found [ 36.802757] hub 1-8:1.0: 3 ports detected [ 36.994549] eth0: forcedeth.c: subsystem: 01695:1011 bound to 0000:00:0a.0 [ 37.134793] Attempting manual resume [ 37.151148] kjournald starting. Commit interval 5 seconds [ 37.151156] EXT3-fs: mounted filesystem with ordered data mode. [ 37.276857] usb 2-4: new full speed USB device using ohci_hcd and address 2 [ 37.423782] hub 2-4:1.0: USB hub found [ 37.426767] hub 2-4:1.0: 4 ports detected [ 37.723551] usb 1-8.2: new low speed USB device using ehci_hcd and address 4 [ 38.008317] usb 2-4.4: new low speed USB device using ohci_hcd and address 3 [ 43.380407] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 44.468691] i2c_adapter i2c-0: nForce2 SMBus adapter at 0xf800 [ 44.468715] i2c_adapter i2c-1: nForce2 SMBus adapter at 0xf400 [ 44.613213] ieee1394: Initialized config rom entry `ip1394' [ 44.614692] ohci1394: $Rev: 1313 $ Ben Collins