Almost the same problem with Gutsy on a dell inspiron 1520N laptop At startup the brightness controls works (FN+Key UP/FN+ Key Down) (until gdm is loaded) and afterwards the keys are extremely sensitive and any kind of brightness control works only after I login. Nothing happens when I press them after gdm is started and before login or if I switch to text mode. I don't think that it's important but I've updated from 7.10 to 8.04 using update-manager --devel-release. At update time I've chosen to overwrite all config files with the ones provided by the new package version. After the first boot (I'm using compiz) all the windows that were in the backgroud (not minimized, just having a dialog opened in front of it) lost their title bar and when switching back to them the title bar comes up again. I've used sudo nvidia-xconfig -xvmc-uses-textures --xinerama --use-events --no-sli --render-accel to reconfigure the X server and now all works fine with compiz. Back to the brightness issue. Running kernel: 2.6.24-16-generic #1 SMP Thu Apr 10 13:23:42 UTC 2008 i686 GNU/Linux Content of the dmesg: Please note the following. During the boot I've kept pressing Brightness UP/Down on the keyboard. It does work for a while. It's stops working at the same time that messages like [ 25.182603] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 25.182699] atkbd.c: Use 'setkeycodes e005 ' to make it known. stops showing up. (Before the Nvidia module is loaded. That might be only a coincidence because I'm not able to press the keyboard as fast as the kernel loads a module) --------------DMESG output [ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe6d800 (usable) [ 0.000000] BIOS-e820: 000000003fe6d800 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 261741) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261741 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261741 [ 0.000000] On node 0 totalpages: 261741 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 252 pages used for memmap [ 0.000000] HighMem zone: 32113 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FBBF0 checksum 0 [ 0.000000] ACPI: RSDP 000FBBF0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 3FE6F200, 0054 (r1 DELL M08 27D80203 ASL 61) [ 0.000000] ACPI: FACP 3FE6F09C, 00F4 (r4 DELL M08 27D80203 ASL 61) [ 0.000000] ACPI: DSDT 3FE6F800, 5658 (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 3FE7E000, 0040 [ 0.000000] ACPI: HPET 3FE6F300, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC 3FE6F400, 0068 (r1 DELL M08 27D80203 ASL 47) [ 0.000000] ACPI: MCFG 3FE6F3C0, 003E (r16 DELL M08 27D80203 ASL 61) [ 0.000000] ACPI: BOOT 3FE6EFC0, 0028 (r1 DELL M08 27D80203 ASL 61) [ 0.000000] ACPI: SSDT 3FE6DA3C, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259697 [ 0.000000] Kernel command line: root=UUID=8a617cf2-6cb9-41a9-ba08-6c28400ba257 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1662.046 MHz processor. [ 22.938771] Console: colour VGA+ 80x25 [ 22.938775] console [tty0] enabled [ 22.943293] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 22.943678] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 22.965882] Memory: 1025852k/1046964k available (2157k kernel code, 20400k reserved, 998k data, 364k init, 129460k highmem) [ 22.965979] virtual kernel memory layout: [ 22.965980] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 22.965981] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 22.965982] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 22.965983] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 22.965984] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 22.965985] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 22.965986] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 22.966560] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 22.966729] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 22.966961] hpet clockevent registered [ 23.046949] Calibrating delay using timer specific routine.. 3327.99 BogoMIPS (lpj=6655999) [ 23.047107] Security Framework initialized [ 23.047182] SELinux: Disabled at boot. [ 23.047261] AppArmor: AppArmor initialized [ 23.047336] Failure registering capabilities with primary security module. [ 23.047415] Mount-cache hash table entries: 512 [ 23.047589] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 23.047597] monitor/mwait feature present. [ 23.047669] using mwait in idle threads. [ 23.047743] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.047869] CPU: L2 cache: 2048K [ 23.047947] CPU: Physical Processor ID: 0 [ 23.048019] CPU: Processor Core ID: 0 [ 23.048090] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 23.048098] Compat vDSO mapped to ffffe000. [ 23.048179] Checking 'hlt' instruction... OK. [ 23.063390] SMP alternatives: switching to UP code [ 23.065088] Early unpacking initramfs... done [ 23.407318] ACPI: Core revision 20070126 [ 23.407431] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 23.411387] CPU0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d [ 23.411589] SMP alternatives: switching to SMP code [ 23.412346] Booting processor 1/1 eip 3000 [ 23.422648] Initializing CPU#1 [ 23.502833] Calibrating delay using timer specific routine.. 3323.90 BogoMIPS (lpj=6647806) [ 23.502839] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 23.502845] monitor/mwait feature present. [ 23.502848] CPU: L1 I cache: 32K, L1 D cache: 32K [ 23.502850] CPU: L2 cache: 2048K [ 23.502851] CPU: Physical Processor ID: 0 [ 23.502853] CPU: Processor Core ID: 1 [ 23.502854] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 23.503387] CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d [ 23.504115] Total of 2 processors activated (6651.90 BogoMIPS). [ 23.504391] ENABLING IO-APIC IRQs [ 23.504656] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 23.650903] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 23.671046] Brought up 2 CPUs [ 23.671141] CPU0 attaching sched-domain: [ 23.671143] domain 0: span 03 [ 23.671145] groups: 01 02 [ 23.671148] CPU1 attaching sched-domain: [ 23.671150] domain 0: span 03 [ 23.671152] groups: 02 01 [ 23.671358] net_namespace: 64 bytes [ 23.671441] Booting paravirtualized kernel on bare hardware [ 23.672001] Time: 20:37:17 Date: 04/16/08 [ 23.672099] NET: Registered protocol family 16 [ 23.672352] EISA bus registered [ 23.672427] ACPI: bus type pci registered [ 23.683158] PCI: PCI BIOS revision 2.10 entry at 0xfad46, last bus=14 [ 23.683235] PCI: Using configuration type 1 [ 23.683309] Setting up standard PCI resources [ 23.691818] ACPI: EC: Look up EC in DSDT [ 23.738099] ACPI: Interpreter enabled [ 23.738175] ACPI: (supports S0 S3 S4 S5) [ 23.738485] ACPI: Using IOAPIC for interrupt routing [ 23.764892] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 23.765973] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 23.766052] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 23.767648] PCI: Transparent bridge - 0000:00:1e.0 [ 23.767771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 23.768245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 23.768406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 23.768513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 23.768641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 23.768765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 23.780230] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 [ 23.780764] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 23.781238] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 23.781768] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 23.782356] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 23.783298] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 23.784233] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 23.785159] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 23.786235] Linux Plug and Play Support v0.97 (c) Adam Belay [ 23.786337] pnp: PnP ACPI init [ 23.786415] ACPI: bus type pnp registered [ 23.828653] pnpacpi: exceeded the max number of mem resources: 12 [ 23.828944] pnp: PnP ACPI: found 12 devices [ 23.829019] ACPI: ACPI bus type pnp unregistered [ 23.829095] PnPBIOS: Disabled by ACPI PNP [ 23.829374] PCI: Using ACPI for IRQ routing [ 23.829450] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 23.922743] NET: Registered protocol family 8 [ 23.922817] NET: Registered protocol family 20 [ 23.922923] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 23.923223] hpet0: 3 64-bit timers, 14318180 Hz [ 23.924330] AppArmor: AppArmor Filesystem Enabled [ 23.926736] Time: tsc clocksource has been installed. [ 23.926816] Switched to high resolution mode on CPU 0 [ 23.926979] Switched to high resolution mode on CPU 1 [ 23.942721] system 00:05: ioport range 0xc80-0xcff could not be reserved [ 23.942807] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 23.942888] system 00:09: ioport range 0x900-0x97f has been reserved [ 23.942965] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 23.943042] system 00:09: ioport range 0x1000-0x1005 has been reserved [ 23.943119] system 00:09: ioport range 0x1008-0x100f has been reserved [ 23.943206] system 00:0a: ioport range 0xf400-0xf4fe has been reserved [ 23.943283] system 00:0a: ioport range 0x1006-0x1007 has been reserved [ 23.943359] system 00:0a: ioport range 0x100a-0x1059 could not be reserved [ 23.943436] system 00:0a: ioport range 0x1060-0x107f has been reserved [ 23.943513] system 00:0a: ioport range 0x1080-0x10bf has been reserved [ 23.943590] system 00:0a: ioport range 0x10c0-0x10df has been reserved [ 23.943667] system 00:0a: ioport range 0x1010-0x102f has been reserved [ 23.943744] system 00:0a: ioport range 0x809-0x809 has been reserved [ 23.943826] system 00:0b: iomem range 0x0-0x9efff could not be reserved [ 23.943904] system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved [ 23.943982] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 23.944060] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 23.944138] system 00:0b: iomem range 0x100000-0x3fe6d7ff could not be reserved [ 23.944228] system 00:0b: iomem range 0x3fe6d800-0x3fefffff could not be reserved [ 23.944317] system 00:0b: iomem range 0x3ff00000-0x3fffffff could not be reserved [ 23.944406] system 00:0b: iomem range 0x3ff00000-0x406fffff could not be reserved [ 23.944496] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved [ 23.944585] system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved [ 23.944664] system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 23.946314] system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 23.976799] PCI: Bridge: 0000:00:01.0 [ 23.976874] IO window: d000-dfff [ 23.976948] MEM window: fa000000-feafffff [ 23.977023] PREFETCH window: f4000000-f7ffffff [ 23.977100] PCI: Bridge: 0000:00:1c.0 [ 23.977172] IO window: disabled. [ 23.977250] MEM window: disabled. [ 23.977325] PREFETCH window: disabled. [ 23.977403] PCI: Bridge: 0000:00:1c.1 [ 23.977475] IO window: disabled. [ 23.977552] MEM window: f9f00000-f9ffffff [ 23.977628] PREFETCH window: disabled. [ 23.977706] PCI: Bridge: 0000:00:1c.3 [ 23.977781] IO window: c000-cfff [ 23.977857] MEM window: f9c00000-f9efffff [ 23.977934] PREFETCH window: f8000000-f81fffff [ 23.978013] PCI: Bridge: 0000:00:1e.0 [ 23.978085] IO window: disabled. [ 23.978162] MEM window: f9b00000-f9bfffff [ 23.978239] PREFETCH window: disabled. [ 23.978330] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.978478] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 23.978503] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.978652] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 23.978681] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 23.978831] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 23.978857] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 23.979007] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 23.979022] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 23.979033] NET: Registered protocol family 2 [ 24.018728] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 24.019027] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 24.019533] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 24.019816] TCP: Hash tables configured (established 131072 bind 65536) [ 24.019893] TCP reno registered [ 24.030798] checking if image is initramfs... it is [ 24.705851] Freeing initrd memory: 7260k freed [ 24.706074] Simple Boot Flag at 0x79 set to 0x1 [ 24.706745] audit: initializing netlink socket (disabled) [ 24.706833] audit(1208378238.613:1): initialized [ 24.707074] highmem bounce pool size: 64 pages [ 24.709055] VFS: Disk quotas dquot_6.5.1 [ 24.709205] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 24.709411] io scheduler noop registered [ 24.709485] io scheduler anticipatory registered [ 24.709560] io scheduler deadline registered [ 24.709643] io scheduler cfq registered (default) [ 24.709860] Boot video device is 0000:01:00.0 [ 24.709969] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 24.710010] assign_interrupt_mode Found MSI capability [ 24.710118] Allocate Port Service[0000:00:01.0:pcie00] [ 24.710151] Allocate Port Service[0000:00:01.0:pcie02] [ 24.710233] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 24.710297] assign_interrupt_mode Found MSI capability [ 24.710422] Allocate Port Service[0000:00:1c.0:pcie00] [ 24.710451] Allocate Port Service[0000:00:1c.0:pcie02] [ 24.710568] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 24.710633] assign_interrupt_mode Found MSI capability [ 24.710756] Allocate Port Service[0000:00:1c.1:pcie00] [ 24.710787] Allocate Port Service[0000:00:1c.1:pcie02] [ 24.710893] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 24.710957] assign_interrupt_mode Found MSI capability [ 24.711081] Allocate Port Service[0000:00:1c.3:pcie00] [ 24.711111] Allocate Port Service[0000:00:1c.3:pcie02] [ 24.711369] isapnp: Scanning for PnP cards... [ 25.069157] isapnp: No Plug & Play device found [ 25.093751] Real Time Clock Driver v1.12ac [ 25.093967] hpet_resources: 0xfed00000 is busy [ 25.094027] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 25.095229] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 25.095379] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 25.095558] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 25.098828] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 25.098904] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 25.118501] mice: PS/2 mouse device common for all mice [ 25.118682] EISA: Probing bus 0 at eisa.0 [ 25.118815] EISA: Mainboard DG_FFFF detected. [ 25.118925] Cannot allocate resource for EISA slot 1 [ 25.119031] EISA: Detected 0 cards. [ 25.119104] cpuidle: using governor ladder [ 25.119178] cpuidle: using governor menu [ 25.119333] NET: Registered protocol family 1 [ 25.119440] Using IPI No-Shortcut mode [ 25.119538] registered taskstats version 1 [ 25.119736] Magic number: 4:891:649 [ 25.119833] hash matches device ptyde [ 25.119952] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 25.120028] EDD information not available. [ 25.120273] Freeing unused kernel memory: 364k freed [ 25.122510] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 25.182603] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 25.182699] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 25.312423] fuse init (API version 7.9) [ 25.332301] ACPI: SSDT 3FE6E572, 0202 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 25.332710] ACPI: SSDT 3FE6DF08, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 25.333463] Monitor-Mwait will be used to enter C-1 state [ 25.333466] Monitor-Mwait will be used to enter C-2 state [ 25.333468] Monitor-Mwait will be used to enter C-3 state [ 25.333583] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 25.333887] ACPI: Processor [CPU0] (supports 8 throttling states) [ 25.334286] ACPI: SSDT 3FE6E774, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 25.334679] ACPI: SSDT 3FE6E4ED, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 25.335653] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 25.335956] ACPI: Processor [CPU1] (supports 8 throttling states) [ 25.342662] ACPI: Thermal Zone [THM] (37 C) [ 25.422250] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 25.422346] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 25.624930] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 25.625028] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 25.678742] usbcore: registered new interface driver usbfs [ 25.678840] usbcore: registered new interface driver hub [ 25.679768] usbcore: registered new device driver usb [ 25.690393] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 19 [ 25.690553] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 25.690557] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 25.690867] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 25.694858] ehci_hcd 0000:00:1a.7: debug port 1 [ 25.694938] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 25.694948] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfed1c400 [ 25.710309] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.710533] usb usb1: configuration #1 chosen from 1 choice [ 25.710634] hub 1-0:1.0: USB hub found [ 25.710710] hub 1-0:1.0: 4 ports detected [ 25.717712] USB Universal Host Controller Interface driver v3.0 [ 25.759783] SCSI subsystem initialized [ 25.787291] libata version 3.00 loaded. [ 25.813950] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 25.814043] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 25.814376] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 25.814532] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 25.814537] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 25.814635] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 25.814755] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 25.814943] usb usb2: configuration #1 chosen from 1 choice [ 25.815041] hub 2-0:1.0: USB hub found [ 25.815117] hub 2-0:1.0: 2 ports detected [ 25.915387] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 25.915548] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 25.915553] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 25.915651] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 25.915773] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 25.915965] usb usb3: configuration #1 chosen from 1 choice [ 25.916063] hub 3-0:1.0: USB hub found [ 25.916140] hub 3-0:1.0: 2 ports detected [ 26.019334] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 26.019493] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 26.019497] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 26.019594] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 26.019710] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 26.019898] usb usb4: configuration #1 chosen from 1 choice [ 26.019995] hub 4-0:1.0: USB hub found [ 26.020071] hub 4-0:1.0: 2 ports detected [ 26.086406] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 26.086499] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 26.123332] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 26.123488] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 26.123492] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 26.123589] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 26.123706] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 26.123896] usb usb5: configuration #1 chosen from 1 choice [ 26.123993] hub 5-0:1.0: USB hub found [ 26.124070] hub 5-0:1.0: 2 ports detected [ 26.227286] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 19 [ 26.227444] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 26.227448] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 26.227543] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 26.227659] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00006f40 [ 26.229431] usb usb6: configuration #1 chosen from 1 choice [ 26.229529] hub 6-0:1.0: USB hub found [ 26.229605] hub 6-0:1.0: 2 ports detected [ 26.282276] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 26.282369] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 26.291219] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 26.306827] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 26.306926] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 26.322387] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 26.322476] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 26.331502] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 26.331664] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 26.390344] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0 [ 26.390626] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 26.425403] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 26.425493] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 26.444783] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9bfd800-f9bfdfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 26.448995] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.449172] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 26.449186] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 26.449289] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 26.449453] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 26.449465] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 26.449593] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 26.449742] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 26.449747] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 26.449844] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 26.453857] ehci_hcd 0000:00:1d.7: debug port 1 [ 26.453936] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 26.453942] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 26.467187] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.467411] usb usb7: configuration #1 chosen from 1 choice [ 26.467507] hub 7-0:1.0: USB hub found [ 26.467582] hub 7-0:1.0: 6 ports detected [ 26.481522] usb 2-2: configuration #1 chosen from 1 choice [ 26.482962] hub 2-2:1.0: USB hub found [ 26.484917] hub 2-2:1.0: 3 ports detected [ 26.516468] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 26.516566] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 26.524889] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 26.524987] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 26.530045] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 26.530142] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 26.535277] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 26.535373] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 26.543121] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 26.543217] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 26.549803] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 26.549899] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 26.556776] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 26.556870] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 26.571283] ata_piix 0000:00:1f.1: version 2.12 [ 26.571300] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.571476] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 26.571570] scsi0 : ata_piix [ 26.571714] scsi1 : ata_piix [ 26.572449] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 26.572526] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 26.575467] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 26.575564] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 26.590132] Clocksource tsc unstable (delta = -2247487378 ns) [ 26.594125] Time: hpet clocksource has been installed. [ 26.605027] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 26.605124] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 26.616546] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE04, max UDMA/33 [ 26.619001] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 26.619096] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 26.619824] usb 7-6: new high speed USB device using ehci_hcd and address 2 [ 26.757143] usb 7-6: configuration #1 chosen from 1 choice [ 26.765206] ata1.00: configured for UDMA/33 [ 26.765367] ata2: port disabled. ignoring. [ 26.771627] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 26.771724] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 26.780216] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE04 PQ: 0 ANSI: 5 [ 26.780406] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 26.915554] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 26.915747] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 26.915840] scsi2 : ata_piix [ 26.916090] scsi3 : ata_piix [ 26.916836] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17 [ 26.916914] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17 [ 26.920089] usb 2-2.1: new full speed USB device using uhci_hcd and address 3 [ 26.960337] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 26.960434] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 26.966743] usb 2-2.1: configuration #1 chosen from 1 choice [ 26.976733] ata3.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7KP, max UDMA/100 [ 26.976815] ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 26.992734] ata3.00: configured for UDMA/100 [ 27.057823] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 27.057923] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 27.060468] usb 2-2.2: new full speed USB device using uhci_hcd and address 4 [ 27.098204] ieee1394: Host added: ID:BUS[0-00:1023] GUID[334fc0000dc60c70] [ 27.107123] usb 2-2.2: configuration #1 chosen from 1 choice [ 27.127995] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 27.128097] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 27.192460] usb 2-2.3: new full speed USB device using uhci_hcd and address 5 [ 27.207472] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 27.207569] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 27.237242] usb 2-2.3: configuration #1 chosen from 1 choice [ 27.240683] usbcore: registered new interface driver hiddev [ 27.243882] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input2 [ 27.256605] input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2 [ 27.261879] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input3 [ 27.274533] input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3 [ 27.274866] usbcore: registered new interface driver usbhid [ 27.274941] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 27.304542] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 27.304644] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 27.305151] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5 [ 27.305602] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 27.317905] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 27.318024] b44.c:v2.0 [ 27.327029] Driver 'sd' needs updating - please use bus_type methods [ 27.327189] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 27.327275] sd 2:0:0:0: [sda] Write Protect is off [ 27.327349] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.327366] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.327499] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 27.327582] sd 2:0:0:0: [sda] Write Protect is off [ 27.327656] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.327672] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.327762] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 27.338156] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1c:23:8d:69:53 [ 27.348644] sda1 sda2 sda3 sda4 < sda5 > [ 27.386013] sd 2:0:0:0: [sda] Attached SCSI disk [ 27.392279] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 27.392372] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 27.415649] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 27.415729] Uniform CD-ROM driver Revision: 3.20 [ 27.415852] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 27.426013] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 27.426112] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 27.610039] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 27.610157] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 27.669452] Attempting manual resume [ 27.669525] swsusp: Resume From Partition 8:2 [ 27.669527] PM: Checking swsusp image. [ 27.669738] PM: Resume from disk failed. [ 27.707744] kjournald starting. Commit interval 5 seconds [ 27.707779] EXT3-fs: mounted filesystem with ordered data mode. [ 27.847349] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 27.849120] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 28.053988] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 28.054086] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 28.247487] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 28.247586] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 28.427657] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 28.427755] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 28.684061] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 28.684160] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 28.868545] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 28.868658] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 29.063729] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 29.063826] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 29.334573] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 29.334672] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 29.540350] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 29.540448] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 29.735494] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 29.735592] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 29.920541] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 29.920642] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 30.186875] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 30.186973] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 30.374996] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 30.375094] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 30.559857] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 30.559955] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 30.852555] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 30.852653] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 31.069683] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 31.069780] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 31.266717] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 31.266814] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 31.438181] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 31.438279] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 31.730514] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 31.730612] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 31.914401] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 31.914499] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 32.098299] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 32.098397] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 32.401427] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 32.401525] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 32.610014] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 32.610111] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 32.792926] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 32.793023] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 32.998994] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 32.999082] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 33.302206] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 33.302305] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 33.486064] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 33.486174] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 33.693441] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 33.693540] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 33.875327] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 33.875425] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 34.060296] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 34.060393] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 34.342245] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 34.342342] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 34.537015] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 34.537113] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 34.742628] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 34.742717] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 34.937391] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 34.937487] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 35.131229] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 35.131325] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 35.336708] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 35.336805] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 35.510053] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 35.510148] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 35.860436] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 35.860546] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 36.021551] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 36.021644] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 36.228546] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 36.228641] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 36.435270] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 36.435376] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 36.697034] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 36.697127] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 36.914631] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 36.914723] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 37.015989] iTCO_vendor_support: vendor-support=0 [ 37.107959] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 37.109669] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 37.109786] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 37.111289] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 37.111380] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 37.307889] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 37.307982] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 37.590784] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 37.590876] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 37.599813] Linux agpgart interface v0.102 [ 37.751798] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 37.775789] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 37.775880] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 37.879811] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 37.923893] ACPI: AC Adapter [AC] (off-line) [ 37.955827] input: Lid Switch as /devices/virtual/input/input4 [ 37.958043] ACPI: Lid Switch [LID] [ 37.958160] input: Power Button (CM) as /devices/virtual/input/input5 [ 37.972749] atkbd.c: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0). [ 37.972841] atkbd.c: Use 'setkeycodes e005 ' to make it known. [ 37.987683] ACPI: Power Button (CM) [PBTN] [ 37.987823] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 38.019678] ACPI: Sleep Button (CM) [SBTN] [ 38.049405] ACPI: Battery Slot [BAT0] (battery present) [ 38.059774] ACPI: WMI-Acer: Mapper loaded [ 38.129138] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 38.227009] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input8 [ 38.244524] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 38.244616] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 38.255603] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 38.266062] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 38.287568] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 38.287804] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 38.299564] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 38.315639] sdhci: Secure Digital Host Controller Interface driver [ 38.315718] sdhci: Copyright(c) Pierre Ossman [ 38.315831] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22) [ 38.315944] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22 [ 38.319139] mmc0: SDHCI at 0xf9bfd500 irq 22 DMA [ 38.842178] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0). [ 38.842271] atkbd.c: Use 'setkeycodes e006 ' to make it known. [ 38.878665] nvidia: module license 'NVIDIA' taints kernel. [ 39.105366] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000 [ 39.105460] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 39.139772] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 39.268146] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 39.268317] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 39.311310] Bluetooth: Core ver 2.11 [ 39.318903] NET: Registered protocol family 31 [ 39.318982] Bluetooth: HCI device and connection manager initialized [ 39.319059] Bluetooth: HCI socket layer initialized [ 39.387375] Bluetooth: HCI USB driver ver 2.9 [ 39.389716] usbcore: registered new interface driver hci_usb [ 39.435614] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 39.435767] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 39.435880] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 39.675305] Linux video capture interface: v2.00 [ 39.781279] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 39.781724] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 39.796534] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 39.797397] usbcore: registered new interface driver uvcvideo [ 39.797477] USB Video Class driver (v0.1.0) [ 39.824586] b43-phy0: Broadcom 4311 WLAN found [ 39.893010] phy0: Selected rate control algorithm 'simple' [ 40.769130] udev: renamed network interface wlan0 to eth1 [ 41.031803] lp: driver loaded but no devices found [ 41.269597] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k [ 41.300246] EXT3 FS on sda3, internal journal [ 42.020574] ip_tables: (C) 2000-2006 Netfilter Core Team --------------END Dmesg output -----lspci Output 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 0c:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 01) ---end lspci