Hangs on Resume from Suspend on IBM T40

Bug #111918 reported by bgroicahn
12
This bug affects 1 person
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
Won't Fix
Undecided
Unassigned
linux-source-2.6.20 (Ubuntu)
Won't Fix
Medium
Unassigned

Bug Description

Hangs on Resume from Suspend on IBM T40 - 6.10 to 7.04 Upgrade
Suspend work fine on 6.10 it was my daily routine at night to suspend and resume the next day.
Since I upgraded it hasn't worked at all, it seems like the video is what is failing to 'turn on'
I have to hold the 'on-ff' button until it turns off then again to reboot normally.
Ran some commands in hope of getting you the information you need.

dmesg | grep -i 'acpi'
[ 0.000000] BIOS-e820: 000000001ff60000 - 000000001ff77000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS)
[ 0.000000] ACPI: RSDP (v002 IBM ) @ 0x000f6df0
[ 0.000000] ACPI: XSDT (v001 IBM TP-1R 0x00003140 LTP 0x00000000) @ 0x1ff6a6cd
[ 0.000000] ACPI: FADT (v003 IBM TP-1R 0x00003140 IBM 0x00000001) @ 0x1ff6a800
[ 0.000000] ACPI: SSDT (v001 IBM TP-1R 0x00003140 MSFT 0x0100000e) @ 0x1ff6a9b4
[ 0.000000] ACPI: ECDT (v001 IBM TP-1R 0x00003140 IBM 0x00000001) @ 0x1ff76ebc
[ 0.000000] ACPI: TCPA (v001 IBM TP-1R 0x00003140 PTL 0x00000001) @ 0x1ff76f0e
[ 0.000000] ACPI: BOOT (v001 IBM TP-1R 0x00003140 LTP 0x00000001) @ 0x1ff76fd8
[ 0.000000] ACPI: DSDT (v001 IBM TP-1R 0x00003140 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 4.425142] ACPI: Core revision 20060707
[ 4.425566] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 4.430628] ACPI: setting ELCR to 0200 (from 0800)
[ 4.441255] ACPI: bus type pci registered
[ 4.454499] ACPI: Interpreter enabled
[ 4.454503] ACPI: Using PIC for interrupt routing
[ 4.455297] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.455933] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.456541] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.457146] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.457750] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.458305] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 4.458861] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 4.459468] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.459874] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 4.461445] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 4.462002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 4.467357] ACPI: Power Resource [PUBS] (on)
[ 4.468271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 4.468538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 4.470682] pnp: PnP ACPI init
[ 4.475282] pnp: PnP ACPI: found 13 devices
[ 4.475287] PnPBIOS: Disabled by ACPI PNP
[ 4.475345] PCI: Using ACPI for IRQ routing
[ 4.487288] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 4.487296] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 4.487750] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 4.487753] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 5.659653] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 5.659664] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 5.698077] ACPI: (supports S0 S3 S4 S5)
[ 6.965771] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 6.965779] ACPI: Processor [CPU] (supports 8 throttling states)
[ 6.967888] ACPI: Thermal Zone [THM0] (40 C)
[ 7.342743] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 7.444762] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 7.444768] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.548645] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 7.548650] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 3.704000] Time: acpi_pm clocksource has been installed.
[ 3.716000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 3.716000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 3.844000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 3.844000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 3.876000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 25.076000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 32.680000] ACPI: AC Adapter [AC] (on-line)
[ 32.736000] ACPI: Battery Slot [BAT0] (battery present)
[ 32.808000] ACPI: Power Button (FF) [PWRF]
[ 32.860000] ACPI: Lid Switch [LID]
[ 32.908000] ACPI: Sleep Button (CM) [SLPB]
[ 32.988000] ACPI: ACPI Dock Station Driver
[ 33.052000] ibm_acpi: ThinkPad EC firmware 1RHT71WW-3.04
[ 33.052000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13
[ 33.052000] ibm_acpi: http://ibm-acpi.sf.net/
[ 33.148000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 33.176000] pcc_acpi: loading...
[ 38.764000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 39.600000] apm: overridden by ACPI.

 uname -a
Linux kubuntu-lp2 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686 GNU/Linux

lspci
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 81)

dmesg

[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fe60000 end: 000000001ff60000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001ff60000 size: 0000000000017000 end: 000000001ff77000 type: 3
[ 0.000000] copy_e820_map() start: 000000001ff77000 size: 0000000000002000 end: 000000001ff79000 type: 4
[ 0.000000] copy_e820_map() start: 000000001ff80000 size: 0000000000080000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff60000 (usable)
[ 0.000000] BIOS-e820: 000000001ff60000 - 000000001ff77000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130912) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130912
[ 0.000000] HighMem 130912 -> 130912
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130912
[ 0.000000] On node 0 totalpages: 130912
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 990 pages used for memmap
[ 0.000000] Normal zone: 125826 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v002 IBM ) @ 0x000f6df0
[ 0.000000] ACPI: XSDT (v001 IBM TP-1R 0x00003140 LTP 0x00000000) @ 0x1ff6a6cd
[ 0.000000] ACPI: FADT (v003 IBM TP-1R 0x00003140 IBM 0x00000001) @ 0x1ff6a800
[ 0.000000] ACPI: SSDT (v001 IBM TP-1R 0x00003140 MSFT 0x0100000e) @ 0x1ff6a9b4
[ 0.000000] ACPI: ECDT (v001 IBM TP-1R 0x00003140 IBM 0x00000001) @ 0x1ff76ebc
[ 0.000000] ACPI: TCPA (v001 IBM TP-1R 0x00003140 PTL 0x00000001) @ 0x1ff76f0e
[ 0.000000] ACPI: BOOT (v001 IBM TP-1R 0x00003140 LTP 0x00000001) @ 0x1ff76fd8
[ 0.000000] ACPI: DSDT (v001 IBM TP-1R 0x00003140 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
[ 0.000000] Detected 1495.211 MHz processor.
[ 3.932065] Built 1 zonelists. Total pages: 129890
[ 3.932070] Kernel command line: root=UUID=85c3f672-8197-4c25-8c18-75bd34e9fb94 ro quiet splash
[ 3.932274] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 3.932282] mapped APIC to ffffd000 (0140a000)
[ 3.932286] Enabling fast FPU save and restore... done.
[ 3.932289] Enabling unmasked SIMD FPU exception support... done.
[ 3.932300] Initializing CPU#0
[ 3.932365] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 3.933919] Console: colour VGA+ 80x25
[ 3.934207] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 3.934519] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 3.952464] Memory: 508096k/523648k available (1992k kernel code, 14936k reserved, 893k data, 328k init, 0k highmem)
[ 3.952476] virtual kernel memory layout:
[ 3.952478] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 3.952479] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 3.952481] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 3.952482] lowmem : 0xc0000000 - 0xdff60000 ( 511 MB)
[ 3.952484] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 3.952485] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 3.952487] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 3.952491] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 4.032248] Calibrating delay using timer specific routine.. 2992.55 BogoMIPS (lpj=5985105)
[ 4.032299] Security Framework v1.0.0 initialized
[ 4.032308] SELinux: Disabled at boot.
[ 4.032329] Mount-cache hash table entries: 512
[ 4.032488] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[ 4.032503] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 4.032506] CPU: L2 cache: 1024K
[ 4.032509] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000
[ 4.032520] Compat vDSO mapped to ffffe000.
[ 4.032525] Remapping vsyscall page to ffffe000
[ 4.032537] Checking 'hlt' instruction... OK.
[ 4.048322] SMP alternatives: switching to UP code
[ 4.048499] Freeing SMP alternatives: 11k freed
[ 4.048699] Early unpacking initramfs... done
[ 4.425142] ACPI: Core revision 20060707
[ 4.425566] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 4.430628] ACPI: setting ELCR to 0200 (from 0800)
[ 4.440726] CPU0: Intel(R) Pentium(R) M processor 1500MHz stepping 05
[ 4.440733] SMP motherboard not detected.
[ 4.440735] Local APIC not detected. Using dummy APIC emulation.
[ 4.440773] Brought up 1 CPUs
[ 4.441049] Booting paravirtualized kernel on bare hardware
[ 4.441121] Time: 1:58:10 Date: 04/03/107
[ 4.441155] NET: Registered protocol family 16
[ 4.441250] EISA bus registered
[ 4.441255] ACPI: bus type pci registered
[ 4.441342] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
[ 4.441345] PCI: Using configuration type 1
[ 4.441347] Setting up standard PCI resources
[ 4.454499] ACPI: Interpreter enabled
[ 4.454503] ACPI: Using PIC for interrupt routing
[ 4.455297] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.455933] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.456541] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.457146] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.457750] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.458305] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 4.458861] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 4.459468] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.459874] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 4.459879] PCI: Probing PCI hardware (bus 00)
[ 4.461445] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 4.461450] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 4.461696] Boot video device is 0000:01:00.0
[ 4.461830] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 4.461891] PCI: Transparent bridge - 0000:00:1e.0
[ 4.462002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 4.467357] ACPI: Power Resource [PUBS] (on)
[ 4.468271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 4.468538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 4.470666] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 4.470682] pnp: PnP ACPI init
[ 4.475282] pnp: PnP ACPI: found 13 devices
[ 4.475287] PnPBIOS: Disabled by ACPI PNP
[ 4.475345] PCI: Using ACPI for IRQ routing
[ 4.475349] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 4.485738] NET: Registered protocol family 8
[ 4.485741] NET: Registered protocol family 20
[ 4.486738] PCI: Bridge: 0000:00:01.0
[ 4.486741] IO window: 3000-3fff
[ 4.486745] MEM window: c0100000-c01fffff
[ 4.486749] PREFETCH window: e0000000-e7ffffff
[ 4.486758] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[ 4.486760] IO window: 00004000-000040ff
[ 4.486765] IO window: 00004400-000044ff
[ 4.486770] PREFETCH window: e8000000-ebffffff
[ 4.486774] MEM window: c4000000-c7ffffff
[ 4.486779] PCI: Bus 7, cardbus bridge: 0000:02:00.1
[ 4.486781] IO window: 00004800-000048ff
[ 4.486785] IO window: 00004c00-00004cff
[ 4.486790] PREFETCH window: ec000000-efffffff
[ 4.486795] MEM window: c8000000-cbffffff
[ 4.486799] PCI: Bridge: 0000:00:1e.0
[ 4.486802] IO window: 4000-8fff
[ 4.486808] MEM window: c0200000-cfffffff
[ 4.486813] PREFETCH window: e8000000-efffffff
[ 4.486829] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 4.487288] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 4.487292] PCI: setting IRQ 11 as level-triggered
[ 4.487296] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 4.487750] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 4.487753] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 4.487788] NET: Registered protocol family 2
[ 4.515733] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 4.515831] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 4.515975] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 4.516046] TCP: Hash tables configured (established 16384 bind 8192)
[ 4.516049] TCP reno registered
[ 4.527777] checking if image is initramfs... it is
[ 5.269430] Freeing initrd memory: 6747k freed
[ 5.269699] Simple Boot Flag at 0x35 set to 0x1
[ 5.269910] audit: initializing netlink socket (disabled)
[ 5.269928] audit(1178157490.512:1): initialized
[ 5.270093] VFS: Disk quotas dquot_6.5.1
[ 5.270117] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.270181] io scheduler noop registered
[ 5.270185] io scheduler anticipatory registered
[ 5.270187] io scheduler deadline registered
[ 5.270202] io scheduler cfq registered (default)
[ 5.270554] isapnp: Scanning for PnP cards...
[ 5.623232] isapnp: No Plug & Play device found
[ 5.657648] Real Time Clock Driver v1.12ac
[ 5.657713] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 5.657962] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 5.659202] pnp: Device 00:0a activated.
[ 5.659384] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 5.659653] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 5.659664] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 5.659730] mice: PS/2 mouse device common for all mice
[ 5.660360] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 5.660649] input: Macintosh mouse button emulation as /class/input/input0
[ 5.660686] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 5.660691] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 5.660890] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 5.667711] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.667718] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.667865] EISA: Probing bus 0 at eisa.0
[ 5.667873] Cannot allocate resource for EISA slot 1
[ 5.667877] Cannot allocate resource for EISA slot 2
[ 5.667880] Cannot allocate resource for EISA slot 3
[ 5.667883] Cannot allocate resource for EISA slot 4
[ 5.667885] Cannot allocate resource for EISA slot 5
[ 5.667888] Cannot allocate resource for EISA slot 6
[ 5.667891] Cannot allocate resource for EISA slot 7
[ 5.667893] Cannot allocate resource for EISA slot 8
[ 5.667896] EISA: Detected 0 cards.
[ 5.697971] TCP cubic registered
[ 5.697983] NET: Registered protocol family 1
[ 5.698010] Using IPI No-Shortcut mode
[ 5.698077] ACPI: (supports S0 S3 S4 S5)
[ 5.698131] Magic number: 7:761:962
[ 5.698154] hash matches device ttyb3
[ 5.698194] Time: tsc clocksource has been installed.
[ 5.698601] Freeing unused kernel memory: 328k freed
[ 5.700574] input: AT Translated Set 2 keyboard as /class/input/input1
[ 6.921278] Capability LSM initialized
[ 6.965771] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 6.965779] ACPI: Processor [CPU] (supports 8 throttling states)
[ 6.967888] ACPI: Thermal Zone [THM0] (40 C)
[ 7.340994] usbcore: registered new interface driver usbfs
[ 7.341020] usbcore: registered new interface driver hub
[ 7.341043] usbcore: registered new device driver usb
[ 7.342683] USB Universal Host Controller Interface driver v3.0
[ 7.342743] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 7.342756] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 7.342761] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.342954] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 7.342981] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 7.343093] usb usb1: configuration #1 chosen from 1 choice
[ 7.343120] hub 1-0:1.0: USB hub found
[ 7.343126] hub 1-0:1.0: 2 ports detected
[ 7.433173] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 7.433177] e100: Copyright(c) 1999-2006 Intel Corporation
[ 7.444762] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 7.444768] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.444782] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 7.444786] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.444814] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 7.444841] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 7.444958] usb usb2: configuration #1 chosen from 1 choice
[ 7.444987] hub 2-0:1.0: USB hub found
[ 7.444995] hub 2-0:1.0: 2 ports detected
[ 7.548645] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 7.548650] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 7.548664] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 7.548669] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.548697] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 7.548724] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 7.548832] usb usb3: configuration #1 chosen from 1 choice
[ 7.548865] hub 3-0:1.0: USB hub found
[ 7.548872] hub 3-0:1.0: 2 ports detected
[ 7.574423] Floppy drive(s): fd0 is 1.44M
[ 7.608477] FDC 0 is a National Semiconductor PC87306
[ 3.704000] Time: acpi_pm clocksource has been installed.
[ 3.716000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 3.716000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 3.716000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.716000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.716000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 3.716000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.716000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.716000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
[ 3.720000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.720000] usb usb4: configuration #1 chosen from 1 choice
[ 3.720000] hub 4-0:1.0: USB hub found
[ 3.720000] hub 4-0:1.0: 6 ports detected
[ 3.832000] SCSI subsystem initialized
[ 3.844000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 3.844000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 3.868000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:0D:60:10:C1:51
[ 3.868000] libata version 2.20 loaded.
[ 3.876000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 3.876000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 3.876000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 3.876000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.876000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14
[ 3.876000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15
[ 3.876000] scsi0 : ata_piix
[ 4.040000] ata1.00: ata_hpa_resize 1: sectors = 71859186, hpa_sectors = 78140160
[ 4.040000] ata1.00: Host Protected Area detected.
[ 4.040000] current size : 71859186 sectors (36791 MB)
[ 4.040000] native size : 78140160 sectors (40007 MB)
[ 4.048000] ata1.00: Native size increased to 78140160 sectors
[ 4.048000] ata1.00: ATA-6: HTS548040M9AT00, MG2OA55A, max UDMA/100
[ 4.048000] ata1.00: 78140160 sectors, multi 16: LBA
[ 4.056000] ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
[ 4.056000] ata1.00: configured for UDMA/100
[ 4.056000] scsi1 : ata_piix
[ 4.376000] ata2.00: ATAPI, max UDMA/33
[ 4.544000] ata2.00: configured for UDMA/33
[ 4.544000] scsi 0:0:0:0: Direct-Access ATA HTS548040M9AT00 MG2O PQ: 0 ANSI: 5
[ 4.560000] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8083N 0K03 PQ: 0 ANSI: 5
[ 4.580000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[ 4.580000] sda: Write Protect is off
[ 4.580000] sda: Mode Sense: 00 3a 00 00
[ 4.580000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.580000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[ 4.580000] sda: Write Protect is off
[ 4.580000] sda: Mode Sense: 00 3a 00 00
[ 4.580000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.580000] sda: sda1 sda2 < sda5 >
[ 4.636000] sd 0:0:0:0: Attached scsi disk sda
[ 4.640000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.640000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.652000] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[ 4.652000] Uniform CD-ROM driver Revision: 3.20
[ 4.652000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.808000] Attempting manual resume
[ 4.808000] swsusp: Resume From Partition 8:5
[ 4.808000] PM: Checking swsusp image.
[ 4.808000] PM: Resume from disk failed.
[ 4.828000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.828000] EXT3-fs: write access will be enabled during recovery.
[ 11.620000] kjournald starting. Commit interval 5 seconds
[ 11.620000] EXT3-fs: recovery complete.
[ 11.620000] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.024000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 23.212000] NET: Registered protocol family 17
[ 23.580000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 23.820000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.068000] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.068000] agpgart: Detected an Intel 855PM Chipset.
[ 24.084000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 24.084000] iTCO_vendor_support: vendor-support=0
[ 24.084000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 24.084000] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 24.084000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 24.136000] input: PC Speaker as /class/input/input2
[ 24.496000] intel_rng: FWH not detected
[ 24.608000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
[ 24.608000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 24.608000] Yenta: Routing CardBus interrupts to PCI
[ 24.608000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
[ 24.636000] parport: PnPBIOS parport detected.
[ 24.636000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 24.760000] irda_init()
[ 24.760000] NET: Registered protocol family 23
[ 24.840000] Yenta: ISA IRQ mask 0x0438, PCI irq 11
[ 24.840000] Socket status: 30000006
[ 24.840000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 24.840000] cs: IO port probe 0x4000-0x8fff: clean.
[ 24.844000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 24.844000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 24.844000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]
[ 24.844000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 24.844000] Yenta: Routing CardBus interrupts to PCI
[ 24.844000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
[ 24.920000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 24.940000] input: TPPS/2 IBM TrackPoint as /class/input/input3
[ 24.944000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
[ 24.944000] nsc-ircc, chip->init
[ 24.944000] nsc-ircc, Found chip at base=0x02e
[ 24.944000] nsc-ircc, driver loaded (Dag Brattli)
[ 24.944000] nsc_ircc_open(), can't get iobase of 0x2f8
[ 24.944000] nsc-ircc, Found chip at base=0x02e
[ 24.944000] nsc-ircc, driver loaded (Dag Brattli)
[ 24.944000] nsc_ircc_open(), can't get iobase of 0x2f8
[ 24.944000] pnp: Device 00:0c disabled.
[ 25.076000] Yenta: ISA IRQ mask 0x0438, PCI irq 11
[ 25.076000] Socket status: 30000006
[ 25.076000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 25.076000] cs: IO port probe 0x4000-0x8fff: clean.
[ 25.076000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 25.076000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 25.076000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 25.076000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 25.680000] cs: IO port probe 0x100-0x3af: clean.
[ 25.684000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 25.684000] cs: IO port probe 0x820-0x8ff: clean.
[ 25.684000] cs: IO port probe 0xc00-0xcf7: clean.
[ 25.684000] cs: IO port probe 0xa00-0xaff: clean.
[ 25.684000] cs: IO port probe 0x100-0x3af: clean.
[ 25.684000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 25.684000] cs: IO port probe 0x820-0x8ff: clean.
[ 25.688000] cs: IO port probe 0xc00-0xcf7: clean.
[ 25.688000] cs: IO port probe 0xa00-0xaff: clean.
[ 25.896000] intel8x0_measure_ac97_clock: measured 55360 usecs
[ 25.896000] intel8x0: clocking to 48000
[ 25.984000] lp0: using parport0 (interrupt-driven).
[ 26.044000] ndiswrapper version 1.38 loaded (preempt=no,smp=yes)
[ 26.136000] usbcore: registered new interface driver ndiswrapper
[ 26.160000] Adding 1510068k swap on /dev/disk/by-uuid/9ee9d768-bb9d-4653-a3bf-4c5d75b72237. Priority:-1 extents:1 across:1510068k
[ 26.216000] EXT3 FS on sda1, internal journal
[ 32.680000] ACPI: AC Adapter [AC] (on-line)
[ 32.736000] ACPI: Battery Slot [BAT0] (battery present)
[ 32.804000] input: Power Button (FF) as /class/input/input4
[ 32.808000] ACPI: Power Button (FF) [PWRF]
[ 32.856000] input: Lid Switch as /class/input/input5
[ 32.860000] ACPI: Lid Switch [LID]
[ 32.904000] input: Sleep Button (CM) as /class/input/input6
[ 32.908000] ACPI: Sleep Button (CM) [SLPB]
[ 32.932000] Using specific hotkey driver
[ 32.988000] ACPI: ACPI Dock Station Driver
[ 33.052000] ibm_acpi: ThinkPad EC firmware 1RHT71WW-3.04
[ 33.052000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13
[ 33.052000] ibm_acpi: http://ibm-acpi.sf.net/
[ 33.148000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 33.176000] pcc_acpi: loading...
[ 33.632000] NET: Registered protocol family 10
[ 33.632000] lo: Disabled Privacy Extensions
[ 36.028000] ttyS1: LSR safety check engaged!
[ 38.648000] ppdev: user-space parallel port driver
[ 38.712000] [drm] Initialized drm 1.1.0 20060810
[ 38.764000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 38.764000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 39.600000] IBM machine detected. Enabling interrupts during APM calls.
[ 39.600000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 39.600000] apm: overridden by ACPI.
[ 39.796000] Non-volatile memory driver v1.2
[ 39.852000] input: /usr/sbin/thinkpad-keys as /class/input/input7
[ 40.412000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 40.412000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 40.412000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 40.660000] [drm] Setting GART location based on new memory map
[ 40.660000] [drm] writeback test succeeded in 2 usecs
[ 40.936000] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 41.068000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 41.084000] NFSD: starting 90-second grace period
[ 42.096000] Bluetooth: Core ver 2.11
[ 42.096000] NET: Registered protocol family 31
[ 42.096000] Bluetooth: HCI device and connection manager initialized
[ 42.096000] Bluetooth: HCI socket layer initialized
[ 42.216000] Bluetooth: L2CAP ver 2.8
[ 42.216000] Bluetooth: L2CAP socket layer initialized
[ 42.288000] Bluetooth: RFCOMM socket layer initialized
[ 42.288000] Bluetooth: RFCOMM TTY layer initialized
[ 42.288000] Bluetooth: RFCOMM ver 1.8
[ 52.208000] eth0: no IPv6 routers present
[ 98.704000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 98.892000] ISOFS: changing to secondary root

Revision history for this message
Launchpad Janitor (janitor) wrote : This bug is now reported against the 'linux' package

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this bug to the new "linux" package. However, development has already began for the upcoming Intrepid Ibex 8.10 release. It would be helpful if you could test the upcoming release and verify if this is still an issue - http://www.ubuntu.com/testing . If the issue still exists, please update this report by changing the Status of the "linux" task from "Incomplete" to "New". We appreciate your patience and understanding as we make this transition. Thanks!

Revision history for this message
Leann Ogasawara (leannogasawara) wrote :

The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. There are one of two ways you should be able to test:

1) If you are comfortable installing packages on your own, the linux-image-2.6.27-* package is currently available for you to install and test.

--or--

2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. You should then be able to test via a LiveCD.

Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. More importantly, please open a new bug report for each new bug/regression introduced by the 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Thanks again, we really appreicate your help and feedback.

Revision history for this message
Leann Ogasawara (leannogasawara) wrote :

*This is an automated response*

This bug report is being closed because we received no response to the previous request for information. Please reopen this if it is still an issue in the actively developed pre-release of Jaunty Jackalope 9.04 - http://cdimage.ubuntu.com/releases/jaunty . To reopen the bug report simply change the Status of the "linux" task back to "New".

Changed in linux:
status: Incomplete → Won't Fix
Curtis Hovey (sinzui)
Changed in linux-source-2.6.20 (Ubuntu):
assignee: Registry Administrators (registry) → nobody
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.