OpenMPI over SRIO errors

This bug was fixed in the package linux-keystone - 3.13.0-21.34

---------------
linux-keystone (3.13.0-21.34) trusty; urgency=low

  [ Ike Panhc ]

  * Release Tracking Bug
    - LP: #1410600
  * Rebase to Ubuntu-3.13.0-45.74

  [ Upstream Kernel Changes ]

  * arm: Outer sharable memory
    - LP: #1411905

  [ Ubuntu: 3.13.0-45.74 ]

  * Release Tracking Bug
    - LP: #1410384
  * SAUCE: drm/i915/vlv: assert and de-assert sideband reset at boot and
    resume v3
    - LP: #1401963
  * SAUCE: storvsc: force SPC-3 compliance on win8 and win8 r2 hosts
    - LP: #1406867
  * SAUCE: Switch VLV/BYT to use i915_bdw.
    - LP: #1401963
  * Revert "xhci: clear root port wake on bits if controller isn't wake-up
    capable"
    - LP: #1408779
  * KVM: PPC: BOOK3S: HV: CMA: Reserve cma region only in hypervisor mode
    - LP: #1400209
  * e1000e: Fix no connectivity when driver loaded with cable out
    - LP: #1400365
  * net/mlx4_core: Enable CQE/EQE stride support
    - LP: #1400127
  * net/mlx4_core: Cache line EQE size support
    - LP: #1400127
  * net/mlx4_en: Add mlx4_en_get_cqe helper
    - LP: #1400127
  * net/mlx4_core: Introduce mlx4_get_module_info for cable module info
    reading
    - LP: #1400127
  * ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool
    support
    - LP: #1400127
  * net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev cap
    - LP: #1400127
  * net/mlx4_core: Add ethernet backplane autoneg device capability
    - LP: #1400127
  * ethtool, net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting
    support
    - LP: #1400127
  * net/mlx4_en: Use PTYS register to query ethtool settings
    - LP: #1400127
  * net/mlx4_en: Use PTYS register to set ethtool settings (Speed)
    - LP: #1400127
  * net/mlx4_en: Add support for setting rxvlan offload OFF/ON
    - LP: #1400127
  * net/mlx4_en: Add ethtool support for [rx|tx]vlan offload set to OFF/ON
    - LP: #1400127
  * net/mlx4_core: Prevent VF from changing port configuration
    - LP: #1400127
  * net/mlx4_en: mlx4_en_set_settings() always fails when autoneg is set
    - LP: #1400127
  * ipv4: fix nexthop attlen check in fib_nh_match
    - LP: #1408779
  * vxlan: fix a use after free in vxlan_encap_bypass
    - LP: #1408779
  * vxlan: using pskb_may_pull as early as possible
    - LP: #1408779
  * vxlan: fix a free after use
    - LP: #1408779
  * ipv4: fix a potential use after free in ip_tunnel_core.c
    - LP: #1408779
  * ax88179_178a: fix bonding failure
    - LP: #1408779
  * tcp: md5: do not use alloc_percpu()
    - LP: #1408779
  * ipv4: dst_entry leak in ip_send_unicast_reply()
    - LP: #1408779
  * drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets
    - LP: #1408779
  * drivers/net: macvtap and tun depend on INET
    - LP: #1408779
  * ip6_tunnel: Use ip6_tnl_dev_init as the ndo_init function.
    - LP: #1408779
  * vti6: Use vti6_dev_init as the ndo_init function.
    - LP: #1408779
  * sit: Use ipip6_tunnel_init as the ndo_init function.
    - LP: #1408779
  * gre6: Move the setting of dev->iflink into the ndo_init functions.
    - LP: #1408779
  * vxlan: Do not reuse sockets for a different address family
    - LP...