Boot hangs after "Loading initial ramdisk ..."

Bug #1852586 reported by Eugen
42
This bug affects 7 people
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
Confirmed
Undecided
Unassigned
Eoan
Fix Released
High
Thadeu Lima de Souza Cascardo

Bug Description

[Impact]
Some systems fail during boot, possibly because of TPM interrupt storms.

[Test case]
Test that systems boot and look for TPM dmesg messages implying probe is OK.

[Regression potential]
TPM in some systems fail to probe, which is better than not booting.

------------------------

Kernel 5.3.0.-23-generic and
Kernel 5.3.0.-22-generic

don't boot, I get the "Loading initial ramdisk ..." on purple background, nothing happens, Notebook need to get shutoff to resume
Kernels:
5.3.0-19 and
5.3.0-18
do work

It's a Lenovo L580 Running Ubuntu 19.10

output of version signature:
Ubuntu 5.3.0-19.20-generic 5.3.1

output of lscpi:
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:3e34] (rev 0c)
 Subsystem: Lenovo Device [17aa:5075]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information: Len=10 <?>
 Kernel driver in use: skl_uncore

00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics 620 (Whiskey Lake) [8086:3ea0] (rev 02) (prog-if 00 [VGA controller])
 Subsystem: Lenovo UHD Graphics 620 (Whiskey Lake) [17aa:5075]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 129
 Region 0: Memory at a0000000 (64-bit, non-prefetchable) [size=16M]
 Region 2: Memory at 80000000 (64-bit, prefetchable) [size=512M]
 Region 4: I/O ports at 2000 [size=64]
 [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
 Capabilities: [40] Vendor Specific Information: Len=0c <?>
 Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
  DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
    AtomicOpsCap: 32bit- 64bit- 128bitCAS-
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
    AtomicOpsCtl: ReqEn-
 Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee00018 Data: 0000
 Capabilities: [d0] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100 v1] Process Address Space ID (PASID)
  PASIDCap: Exec- Priv-, Max PASID Width: 14
  PASIDCtl: Enable- Exec- Priv-
 Capabilities: [200 v1] Address Translation Service (ATS)
  ATSCap: Invalidate Queue Depth: 00
  ATSCtl: Enable-, Smallest Translation Unit: 00
 Capabilities: [300 v1] Page Request Interface (PRI)
  PRICtl: Enable- Reset-
  PRISta: RF- UPRGI- Stopped+
  Page Request Capacity: 00008000, Page Request Allocation: 00000000
 Kernel driver in use: i915
 Kernel modules: i915

00:04.0 Signal processing controller [1180]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [8086:1903] (rev 0c)
 Subsystem: Lenovo Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [17aa:5075]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at a1430000 (64-bit, non-prefetchable) [size=32K]
 Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
  Address: 00000000 Data: 0000
 Capabilities: [d0] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [e0] Vendor Specific Information: Len=0c <?>
 Kernel driver in use: proc_thermal
 Kernel modules: processor_thermal_device

00:08.0 System peripheral [0880]: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model [8086:1911]
 Subsystem: Lenovo Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model [17aa:5075]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 255
 Region 0: Memory at a143e000 (64-bit, non-prefetchable) [disabled] [size=4K]
 Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
  Address: 00000000 Data: 0000
 Capabilities: [dc] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [f0] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-

00:12.0 Signal processing controller [1180]: Intel Corporation Cannon Point-LP Thermal Controller [8086:9df9] (rev 30)
 Subsystem: Lenovo Cannon Point-LP Thermal Controller [17aa:5075]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at a143f000 (64-bit, non-prefetchable) [size=4K]
 Capabilities: [50] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
  Address: 00000000 Data: 0000
 Kernel driver in use: intel_pch_thermal
 Kernel modules: intel_pch_thermal

00:14.0 USB controller [0c03]: Intel Corporation Cannon Point-LP USB 3.1 xHCI Controller [8086:9ded] (rev 30) (prog-if 30 [XHCI])
 Subsystem: Lenovo Cannon Point-LP USB 3.1 xHCI Controller [17aa:5075]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 125
 Region 0: Memory at a1420000 (64-bit, non-prefetchable) [size=64K]
 Capabilities: [70] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
  Address: 00000000fee002b8 Data: 0000
 Capabilities: [90] Vendor Specific Information: Len=14 <?>
 Kernel driver in use: xhci_hcd

00:14.2 RAM memory [0500]: Intel Corporation Cannon Point-LP Shared SRAM [8086:9def] (rev 30)
 Subsystem: Lenovo Cannon Point-LP Shared SRAM [17aa:5075]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Region 0: Memory at a143c000 (64-bit, non-prefetchable) [disabled] [size=8K]
 Region 2: Memory at a1440000 (64-bit, non-prefetchable) [disabled] [size=4K]
 Capabilities: [80] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Controller #0 [8086:9de8] (rev 30)
 Subsystem: Lenovo Cannon Point-LP Serial IO I2C Controller [17aa:5075]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at a1441000 (64-bit, non-prefetchable) [size=4K]
 Region 2: Memory at a1442000 (64-bit, non-prefetchable) [size=4K]
 Capabilities: [80] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [90] Vendor Specific Information: Len=14 <?>
 Kernel driver in use: intel-lpss
 Kernel modules: intel_lpss_pci

00:15.2 Serial bus controller [0c80]: Intel Corporation Device [8086:9dea] (rev 30)
 Subsystem: Lenovo Device [17aa:5075]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin C routed to IRQ 18
 Region 0: [virtual] Memory at a1443000 (64-bit, non-prefetchable) [size=4K]
 Capabilities: [80] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [90] Vendor Specific Information: Len=14 <?>
 Kernel driver in use: intel-lpss
 Kernel modules: intel_lpss_pci

00:16.0 Communication controller [0780]: Intel Corporation Cannon Point-LP MEI Controller #1 [8086:9de0] (rev 30)
 Subsystem: Lenovo Cannon Point-LP MEI Controller [17aa:5075]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 139
 Region 0: Memory at a1444000 (64-bit, non-prefetchable) [size=4K]
 Capabilities: [50] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee00478 Data: 0000
 Capabilities: [a4] Vendor Specific Information: Len=14 <?>
 Kernel driver in use: mei_me
 Kernel modules: mei_me

00:1d.0 PCI bridge [0604]: Intel Corporation Cannon Point-LP PCI Express Root Port #9 [8086:9db0] (rev f0) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 122
 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
 I/O behind bridge: None
 Memory behind bridge: a1300000-a13fffff [size=1M]
 Prefetchable memory behind bridge: None
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 256 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
  LnkCap: Port #9, Speed 8GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
   ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 8GT/s (ok), Width x2 (ok)
   TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
   Slot #8, PowerLimit 25.000W; Interlock- NoCompl+
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState+
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd+
    AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
    AtomicOpsCtl: ReqEn- EgressBlck-
  LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
    EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee00238 Data: 0000
 Capabilities: [90] Subsystem: Lenovo Cannon Point-LP PCI Express Root Port [17aa:5075]
 Capabilities: [a0] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100 v1] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
  AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
   MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
  HeaderLog: 00000000 00000000 00000000 00000000
  RootCmd: CERptEn+ NFERptEn+ FERptEn+
  RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
    FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
  ErrorSrc: ERR_COR: 00e8 ERR_FATAL/NONFATAL: 0000
 Capabilities: [140 v1] Access Control Services
  ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
  ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
 Capabilities: [150 v1] Precision Time Measurement
  PTMCap: Requester:- Responder:+ Root:+
  PTMClockGranularity: 4ns
  PTMControl: Enabled:+ RootSelected:+
  PTMEffectiveGranularity: Unknown
 Capabilities: [200 v1] L1 PM Substates
  L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
     PortCommonModeRestoreTime=40us PortTPowerOnTime=44us
  L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
      T_CommonMode=40us LTR1.2_Threshold=81920ns
  L1SubCtl2: T_PwrOn=44us
 Capabilities: [220 v1] Secondary PCI Express <?>
 Capabilities: [250 v1] Downstream Port Containment
  DpcCap: INT Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
  DpcCtl: Trigger:1 Cmpl- INT+ ErrCor- PoisonedTLP- SwTrigger- DL_ActiveErr-
  DpcSta: Trigger- Reason:00 INT- RPBusy- TriggerExt:00 RP PIO ErrPtr:1f
  Source: 0000
 Kernel driver in use: pcieport

00:1d.3 PCI bridge [0604]: Intel Corporation Device [8086:9db3] (rev f0) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 123
 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
 I/O behind bridge: None
 Memory behind bridge: a1200000-a12fffff [size=1M]
 Prefetchable memory behind bridge: None
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 256 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
  LnkCap: Port #12, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
   ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 5GT/s (downgraded), Width x1 (ok)
   TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
   Slot #11, PowerLimit 10.000W; Interlock- NoCompl+
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState+
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd+
    AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
    AtomicOpsCtl: ReqEn- EgressBlck-
  LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee00278 Data: 0000
 Capabilities: [90] Subsystem: Lenovo Device [17aa:5075]
 Capabilities: [a0] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100 v1] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
  AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
   MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
  HeaderLog: 00000000 00000000 00000000 00000000
  RootCmd: CERptEn+ NFERptEn+ FERptEn+
  RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
    FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
  ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
 Capabilities: [140 v1] Access Control Services
  ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
  ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
 Capabilities: [150 v1] Precision Time Measurement
  PTMCap: Requester:- Responder:+ Root:+
  PTMClockGranularity: 4ns
  PTMControl: Enabled:+ RootSelected:+
  PTMEffectiveGranularity: Unknown
 Capabilities: [200 v1] L1 PM Substates
  L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
     PortCommonModeRestoreTime=40us PortTPowerOnTime=44us
  L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
      T_CommonMode=40us LTR1.2_Threshold=81920ns
  L1SubCtl2: T_PwrOn=44us
 Capabilities: [220 v1] Secondary PCI Express <?>
 Capabilities: [250 v1] Downstream Port Containment
  DpcCap: INT Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
  DpcCtl: Trigger:1 Cmpl- INT+ ErrCor- PoisonedTLP- SwTrigger- DL_ActiveErr-
  DpcSta: Trigger- Reason:00 INT- RPBusy- TriggerExt:00 RP PIO ErrPtr:1f
  Source: 0000
 Kernel driver in use: pcieport

00:1d.7 PCI bridge [0604]: Intel Corporation Device [8086:9db7] (rev f0) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 124
 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
 I/O behind bridge: None
 Memory behind bridge: a1100000-a11fffff [size=1M]
 Prefetchable memory behind bridge: None
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 256 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
  LnkCap: Port #16, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <16us
   ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s (downgraded), Width x1 (ok)
   TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
   Slot #15, PowerLimit 10.000W; Interlock- NoCompl+
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState+
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd+
    AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
    AtomicOpsCtl: ReqEn- EgressBlck-
  LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee00298 Data: 0000
 Capabilities: [90] Subsystem: Lenovo Device [17aa:5075]
 Capabilities: [a0] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100 v1] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
  AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
   MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
  HeaderLog: 00000000 00000000 00000000 00000000
  RootCmd: CERptEn+ NFERptEn+ FERptEn+
  RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
    FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
  ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
 Capabilities: [140 v1] Access Control Services
  ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
  ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
 Capabilities: [150 v1] Precision Time Measurement
  PTMCap: Requester:- Responder:+ Root:+
  PTMClockGranularity: 4ns
  PTMControl: Enabled:+ RootSelected:+
  PTMEffectiveGranularity: Unknown
 Capabilities: [200 v1] L1 PM Substates
  L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
     PortCommonModeRestoreTime=40us PortTPowerOnTime=44us
  L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
      T_CommonMode=120us LTR1.2_Threshold=81920ns
  L1SubCtl2: T_PwrOn=44us
 Capabilities: [220 v1] Secondary PCI Express <?>
 Capabilities: [250 v1] Downstream Port Containment
  DpcCap: INT Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
  DpcCtl: Trigger:1 Cmpl- INT+ ErrCor- PoisonedTLP- SwTrigger- DL_ActiveErr-
  DpcSta: Trigger- Reason:00 INT- RPBusy- TriggerExt:00 RP PIO ErrPtr:1f
  Source: 0000
 Kernel driver in use: pcieport

00:1e.0 Communication controller [0780]: Intel Corporation Device [8086:9da8] (rev 30)
 Subsystem: Lenovo Device [17aa:5075]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 20
 Region 0: [virtual] Memory at a1445000 (64-bit, non-prefetchable) [size=4K]
 Capabilities: [80] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [90] Vendor Specific Information: Len=14 <?>
 Kernel driver in use: intel-lpss
 Kernel modules: intel_lpss_pci

00:1f.0 ISA bridge [0601]: Intel Corporation Cannon Point-LP LPC Controller [8086:9d84] (rev 30)
 Subsystem: Lenovo Cannon Point-LP LPC Controller [17aa:5075]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

00:1f.3 Audio device [0403]: Intel Corporation Cannon Point-LP High Definition Audio Controller [8086:9dc8] (rev 30) (prog-if 80)
 Subsystem: Lenovo Cannon Point-LP High Definition Audio Controller [17aa:5075]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64
 Interrupt: pin A routed to IRQ 150
 Region 0: Memory at a1438000 (64-bit, non-prefetchable) [size=16K]
 Region 4: Memory at a1000000 (64-bit, non-prefetchable) [size=1M]
 Capabilities: [50] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [80] Vendor Specific Information: Len=14 <?>
 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee005d8 Data: 0000
 Kernel driver in use: snd_hda_intel
 Kernel modules: snd_hda_intel, snd_soc_skl, sof_pci_dev

00:1f.4 SMBus [0c05]: Intel Corporation Cannon Point-LP SMBus Controller [8086:9da3] (rev 30)
 Subsystem: Lenovo Cannon Point-LP SMBus Controller [17aa:5075]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at a1446000 (64-bit, non-prefetchable) [size=256]
 Region 4: I/O ports at efa0 [size=32]
 Kernel driver in use: i801_smbus
 Kernel modules: i2c_i801

00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP SPI Controller [8086:9da4] (rev 30)
 Subsystem: Lenovo Cannon Point-LP SPI Controller [17aa:5075]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Region 0: Memory at fe010000 (32-bit, non-prefetchable) [size=4K]

00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (6) I219-V [8086:15be] (rev 30)
 Subsystem: Lenovo Ethernet Connection (6) I219-V [17aa:5075]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 126
 Region 0: Memory at a1400000 (32-bit, non-prefetchable) [size=128K]
 Capabilities: [c8] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee002d8 Data: 0000
 Kernel driver in use: e1000e
 Kernel modules: e1000e

04:00.0 Non-Volatile memory controller [0108]: Silicon Motion, Inc. Device [126f:2263] (rev 03) (prog-if 02 [NVM Express])
 Subsystem: Silicon Motion, Inc. Device [126f:2263]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 NUMA node: 0
 Region 0: Memory at a1300000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [40] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
  Address: 0000000000000000 Data: 0000
  Masking: 00000000 Pending: 00000000
 Capabilities: [70] Express (v2) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 25.000W
  DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
  LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <4us
   ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 8GT/s (ok), Width x2 (downgraded)
   TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Not Supported
    AtomicOpsCap: 32bit- 64bit- 128bitCAS-
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
    AtomicOpsCtl: ReqEn-
  LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS+
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
    EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
 Capabilities: [b0] MSI-X: Enable+ Count=16 Masked-
  Vector table: BAR=0 offset=00002000
  PBA: BAR=0 offset=00002100
 Capabilities: [100 v2] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
  AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
   MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
  HeaderLog: 00000000 00000000 00000000 00000000
 Capabilities: [158 v1] Secondary PCI Express <?>
 Capabilities: [178 v1] Latency Tolerance Reporting
  Max snoop latency: 3145728ns
  Max no snoop latency: 3145728ns
 Capabilities: [180 v1] L1 PM Substates
  L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
     PortCommonModeRestoreTime=10us PortTPowerOnTime=10us
  L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
      T_CommonMode=0us LTR1.2_Threshold=81920ns
  L1SubCtl2: T_PwrOn=44us
 Kernel driver in use: nvme
 Kernel modules: nvme

05:00.0 Network controller [0280]: Intel Corporation Wireless-AC 9260 [8086:2526] (rev 29)
 Subsystem: Intel Corporation Wireless-AC 9260 [8086:0010]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 19
 Region 0: Memory at a1200000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [c8] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
  Address: 0000000000000000 Data: 0000
 Capabilities: [40] Express (v2) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
  DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
  LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <8us
   ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 5GT/s (ok), Width x1 (ok)
   TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via WAKE#
    AtomicOpsCap: 32bit- 64bit- 128bitCAS-
  DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-, LTR+, OBFF Disabled
    AtomicOpsCtl: ReqEn-
  LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI-X: Enable+ Count=16 Masked-
  Vector table: BAR=0 offset=00002000
  PBA: BAR=0 offset=00003000
 Capabilities: [100 v1] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
  AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
   MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
  HeaderLog: 00000000 00000000 00000000 00000000
 Capabilities: [14c v1] Latency Tolerance Reporting
  Max snoop latency: 3145728ns
  Max no snoop latency: 3145728ns
 Capabilities: [154 v1] L1 PM Substates
  L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
     PortCommonModeRestoreTime=30us PortTPowerOnTime=18us
  L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
      T_CommonMode=0us LTR1.2_Threshold=81920ns
  L1SubCtl2: T_PwrOn=44us
 Kernel driver in use: iwlwifi
 Kernel modules: iwlwifi

07:00.0 SD Host controller [0805]: O2 Micro, Inc. SD/MMC Card Reader Controller [1217:8621] (rev 01) (prog-if 01)
 Subsystem: Lenovo SD/MMC Card Reader Controller [17aa:5075]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 127
 Region 0: Memory at a1101000 (32-bit, non-prefetchable) [size=4K]
 Region 1: Memory at a1100000 (32-bit, non-prefetchable) [size=2K]
 Capabilities: [6c] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [48] MSI: Enable+ Count=1/1 Maskable+ 64bit+
  Address: 00000000fee002f8 Data: 0000
  Masking: 00000000 Pending: 00000000
 Capabilities: [80] Express (v2) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
  DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 unlimited
   ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
  LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk-
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
   TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
  DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Not Supported
    AtomicOpsCap: 32bit- 64bit- 128bitCAS-
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
    AtomicOpsCtl: ReqEn-
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed- WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
   Status: NegoPending- InProgress-
 Capabilities: [200 v1] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
  AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
   MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
  HeaderLog: 00000000 00000000 00000000 00000000
 Capabilities: [230 v1] Latency Tolerance Reporting
  Max snoop latency: 253ns
  Max no snoop latency: 3145728ns
 Capabilities: [240 v1] L1 PM Substates
  L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
     PortCommonModeRestoreTime=120us PortTPowerOnTime=10us
  L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
      T_CommonMode=0us LTR1.2_Threshold=81920ns
  L1SubCtl2: T_PwrOn=44us
 Kernel driver in use: sdhci-pci
 Kernel modules: sdhci_pci
---
ProblemType: Bug
ApportVersion: 2.20.11-0ubuntu8.2
Architecture: amd64
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: eugen 1634 F.... pulseaudio
CurrentDesktop: GNOME
DistroRelease: Ubuntu 19.10
InstallationDate: Installed on 2019-10-18 (27 days ago)
InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017)
MachineType: LENOVO 20Q7001CGE
Package: linux (not installed)
ProcEnviron:
 TERM=xterm-256color
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=<set>
 LANG=de_DE.UTF-8
 SHELL=/bin/bash
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.3.0-19-generic root=/dev/mapper/vgubuntu-root ro quiet splash
ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1
RelatedPackageVersions:
 linux-restricted-modules-5.3.0-19-generic N/A
 linux-backports-modules-5.3.0-19-generic N/A
 linux-firmware 1.183.1
Tags: eoan
Uname: Linux 5.3.0-19-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 08/01/2019
dmi.bios.vendor: LENOVO
dmi.bios.version: R0ZET33W (1.11 )
dmi.board.asset.tag: Not Available
dmi.board.name: 20Q7001CGE
dmi.board.vendor: LENOVO
dmi.board.version: SDK0J40697 WIN
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: None
dmi.modalias: dmi:bvnLENOVO:bvrR0ZET33W(1.11):bd08/01/2019:svnLENOVO:pn20Q7001CGE:pvrThinkPadL590:rvnLENOVO:rn20Q7001CGE:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone:
dmi.product.family: ThinkPad L590
dmi.product.name: 20Q7001CGE
dmi.product.sku: LENOVO_MT_20Q7_BU_SMB_FM_ThinkPad L590
dmi.product.version: ThinkPad L590
dmi.sys.vendor: LENOVO

Revision history for this message
Ubuntu Kernel Bot (ubuntu-kernel-bot) wrote : Missing required logs.

This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window:

apport-collect 1852586

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the Ubuntu Kernel Team.

Changed in linux (Ubuntu):
status: New → Incomplete
Revision history for this message
Eugen (netzwerkdude) wrote : AlsaInfo.txt

apport information

Changed in linux (Ubuntu):
status: Incomplete → Confirmed
tags: added: apport-collected eoan
description: updated
Revision history for this message
Eugen (netzwerkdude) wrote : CRDA.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : CurrentDmesg.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : IwConfig.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : Lspci.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : Lsusb.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : ProcCpuinfo.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : ProcCpuinfoMinimal.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : ProcInterrupts.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : ProcModules.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : PulseList.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : RfKill.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : UdevDb.txt

apport information

Revision history for this message
Eugen (netzwerkdude) wrote : WifiSyslog.txt

apport information

Revision history for this message
Tyler Hicks (tyhicks) wrote :

Hi Eugen - Thanks for the bug report and sorry about the trouble you're experiencing.

I'm trying to figure out if there is any link between a few different bug reports that I'm seeing come in for 5.3.0-22. It looks like the dm_crypt module is loaded on your system so I'd like for you to verify here that you use full-disk encryption with LUKS/dm-crypt. Thanks!

Revision history for this message
Eugen (netzwerkdude) wrote :

Hi Tyler,

Yes, LUKS/dm-crypt is running - I've used the options in the OS installer to encrypt the drive

Revision history for this message
Andrey Kadatsky (akadatsky) wrote :

I have the same issue:
Lenovo Thinkpad e590 and full-disk encryption(it asks password during boot).
Also, it works on 5.3.0-19 (and previous) and does not work with 5.3.0-22+.

In my case I see this 2 lines in a loop during boot:
WARNING: Failed to connect to lvmetad. Falling back to device scanning.
Reading all physical volumes. This make take a while...

But I'm not sure how to check do I use LUKS/dm-crypt, cause I got a laptop with already preinstalled OS.

Revision history for this message
Thadeu Lima de Souza Cascardo (cascardo) wrote :

Can you add the output of updating the initramfs? And also try 5.3.0-24 from eoan-proposed?

The initramfs update command would be like:

sudo update-initramfs -u -k 5.3.0-23-generic

I am trying to sort out if this is related to LP: #1852521, where a keyfile was used.

Cascardo.

Revision history for this message
Eugen (netzwerkdude) wrote :

Hi,

here is the output of
sudo update-initramfs -u -k 5.3.0-23-generic

update-initramfs: Generating /boot/initrd.img-5.3.0-23-generic
I: The initramfs will attempt to resume from /dev/dm-2
I: (/dev/mapper/vgubuntu-swap_1)
I: Set the RESUME variable to override this.

(for 24 it's the same)

also 5.3.0-24 from eoan-proposed doesn't work either

Stefan Bader (smb)
Changed in linux (Ubuntu Eoan):
importance: Undecided → High
status: New → Confirmed
Revision history for this message
Thadeu Lima de Souza Cascardo (cascardo) wrote :

Can you try the test package at [1]?

[1] https://people.canonical.com/~cascardo/tpmrevert1/

Revision history for this message
Eugen (netzwerkdude) wrote :

Hi,
can you post a brief howto? I didn't install kernels outside of apt for some time

Revision history for this message
Thadeu Lima de Souza Cascardo (cascardo) wrote :

Just download the linux-image, linux-modules and linux-modules-extra deb files, and dpkg -i linux*tpmrevert*deb.

Revision history for this message
Thadeu Lima de Souza Cascardo (cascardo) wrote :

Oh, and run dpkg as root, or use sudo dpkg -i linux*tpmrevert*deb

Revision history for this message
Eugen (netzwerkdude) wrote :

Had to remove the old 5.3.0-24 first - but okay, now it boots properly with your posted kernel version.

Do you need any additional logs for comfirmation?

Revision history for this message
Thadeu Lima de Souza Cascardo (cascardo) wrote :

Any logs you can produce about the TPM could be helpful.

sudo dmesg | grep -i tpm

Thank you very much.
Thadeu Cascardo.

Revision history for this message
Eugen (netzwerkdude) wrote :

sudo dmesg | grep -i tpm
[sudo] Passwort für eugen:
[ 0.000000] Linux version 5.3.0-24-generic (cascardo@kathleen) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #26+tpmrevert1 SMP Tue Nov 26 14:44:19 UTC 2019 (Ubuntu 5.3.0-24.26+tpmrevert1-generic 5.3.10)
[ 0.000000] efi: TPMFinalLog=0x6fca2000 SMBIOS=0x6dec4000 SMBIOS 3.0=0x6deb7000 ACPI=0x6fd0e000 ACPI 2.0=0x6fd0e014 MEMATTR=0x689c0018 ESRT=0x6c2b3000
[ 0.015682] ACPI: SSDT 0x000000006DCD6000 000612 (v02 LENOVO Tpm2Tabl 00001000 INTL 20160527)
[ 0.015688] ACPI: TPM2 0x000000006DCD5000 000034 (v04 LENOVO TP-R0Z 00001110 PTEC 00000002)
[ 0.984086] tpm_tis STM7308:00: 2.0 TPM (device-id 0x0, rev-id 78)
[ 0.984481] tpm tpm0: tpm_try_transmit: send(): error -5
[ 0.984496] tpm tpm0: [Firmware Bug]: TPM interrupt not working, polling instead
[ 2.554607] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.3.0-24-generic #26+tpmrevert1

description: updated
Changed in linux (Ubuntu Eoan):
status: Confirmed → In Progress
assignee: nobody → Thadeu Lima de Souza Cascardo (cascardo)
Changed in linux (Ubuntu Eoan):
status: In Progress → Fix Committed
Revision history for this message
Andrej Gelenberg (andrej-gelenberg) wrote :

latest 5.3.0-24 kernel is still broken, workaround: add to boot options: tpm_tis.interrupts=0

Revision history for this message
Ubuntu Kernel Bot (ubuntu-kernel-bot) wrote :

This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-eoan' to 'verification-done-eoan'. If the problem still exists, change the tag 'verification-needed-eoan' to 'verification-failed-eoan'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

tags: added: verification-needed-eoan
Revision history for this message
Eugen (netzwerkdude) wrote :

5.3.0-24 does not work - no newer packages in proposed

I disabled TPM in BIOS as a workaround in the meantime - bug still present

Revision history for this message
Eugen (netzwerkdude) wrote :

Where can I change the Tag to verification-failed-eoan ?

Revision history for this message
Andrej Gelenberg (andrej-gelenberg) wrote :

Work: Linux andrej-ThinkPad-L490 5.3.0-25-generic #27-Ubuntu SMP Wed Dec 4 13:36:32 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

tags: added: verification-done-eoan
removed: verification-needed-eoan
Revision history for this message
Launchpad Janitor (janitor) wrote :
Download full text (27.4 KiB)

This bug was fixed in the package linux - 5.3.0-26.28

---------------
linux (5.3.0-26.28) eoan; urgency=medium

  * eoan/linux: 5.3.0-26.28 -proposed tracker (LP: #1856807)

  * nvidia-435 is in eoan, linux-restricted-modules only builds against 430,
    ubiquity gives me the self-signed modules experience instead of using the
    Canonical-signed modules (LP: #1856407)
    - Add nvidia-435 dkms build

linux (5.3.0-25.27) eoan; urgency=medium

  * eoan/linux: 5.3.0-25.27 -proposed tracker (LP: #1854762)

  * CVE-2019-14901
    - SAUCE: mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()

  * CVE-2019-14896 // CVE-2019-14897
    - SAUCE: libertas: Fix two buffer overflows at parsing bss descriptor

  * CVE-2019-14895
    - SAUCE: mwifiex: fix possible heap overflow in mwifiex_process_country_ie()

  * [CML] New device id's for CMP-H (LP: #1846335)
    - mmc: sdhci-pci: Add another Id for Intel CML
    - i2c: i801: Add support for Intel Comet Lake PCH-H
    - mtd: spi-nor: intel-spi: Add support for Intel Comet Lake-H SPI serial flash
    - mfd: intel-lpss: Add Intel Comet Lake PCH-H PCI IDs

  * i915: Display flickers (monitor loses signal briefly) during "flickerfree"
    boot, while showing the BIOS logo on a black background (LP: #1836858)
    - [Config] FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y

  * Please add patch fixing RK818 ID detection (LP: #1853192)
    - SAUCE: mfd: rk808: Fix RK818 ID template

  * Kernel build log filled with "/bin/bash: line 5: warning: command
    substitution: ignored null byte in input" (LP: #1853843)
    - [Debian] Fix warnings when checking for modules signatures

  * Lenovo dock MAC Address pass through doesn't work in Ubuntu (LP: #1827961)
    - r8152: Add macpassthru support for ThinkPad Thunderbolt 3 Dock Gen 2

  * Dell XPS 13 9350/9360 headphone audio hiss (LP: #1654448) // [XPS 13 9360,
    Realtek ALC3246, Black Headphone Out, Front] High noise floor (LP: #1845810)
    - ALSA: hda/realtek: Reduce the Headphone static noise on XPS 9350/9360

  * no HDMI video output since GDM greeter after linux-oem-osp1 version
    5.0.0-1026 (LP: #1852386)
    - drm/i915: Add new CNL PCH ID seen on a CML platform
    - SAUCE: drm/i915: Fix detection for a CMP-V PCH

  * [broadwell-rt286, playback] Since Linux 5.2rc2 audio playback no longer
    works on Dell Venue 11 Pro 7140 (LP: #1846539)
    - [Config] Drop snd-sof-intel-bdw build
    - SAUCE: ASoC: SOF: Intel: Broadwell: clarify mutual exclusion with legacy
      driver

  * [CML-S62] Need enable turbostat patch support for Comet lake- S 6+2
    (LP: #1847451)
    - SAUCE: tools/power turbostat: Add Cometlake support

  * External microphone can't work on some dell machines with the codec alc256
    or alc236 (LP: #1853791)
    - SAUCE: ALSA: hda/realtek - Move some alc256 pintbls to fallback table
    - SAUCE: ALSA: hda/realtek - Move some alc236 pintbls to fallback table

  * Memory leak in net/xfrm/xfrm_state.c - 8 pages per ipsec connection
    (LP: #1853197)
    - xfrm: Fix memleak on xfrm state destroy

  * CVE-2019-18660: patches for Ubuntu (LP: #1853142) // CVE-2019-18660
    - powerpc/64s: support nospectre_v2 cmdline option
    - powerp...

Changed in linux (Ubuntu Eoan):
status: Fix Committed → Fix Released
Revision history for this message
Álvaro Souza (alvarofernandoms) wrote :

5.3.0-26 does not work on my Dell 7567 😭

I'm using 5.0.0-36 for now:
Linux alvaro-7567 5.0.0-36-generic #39-Ubuntu SMP Tue Nov 12 09:46:06 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

Revision history for this message
Andi (keefer-a) wrote :

THX, 5.3.0-26 works fine on my Lenovo L490 :)

Revision history for this message
Álvaro Souza (alvarofernandoms) wrote :

For Dell 7567, still not working.

Last Kernel working: 5.0.0-36

I've tried: from 5.3.0-26 to 5.3.0-40

More info:

$ dmesg |grep microcode
[ 0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03
[ 0.197485] mce: [Hardware Error]: PROCESSOR 0:906e9 TIME 1581946905 SOCKET 0 APIC 0 microcode ca
[ 0.197492] mce: [Hardware Error]: PROCESSOR 0:906e9 TIME 1581946905 SOCKET 0 APIC 0 microcode ca
[ 0.197498] mce: [Hardware Error]: PROCESSOR 0:906e9 TIME 1581946905 SOCKET 0 APIC 0 microcode ca
[ 0.197503] mce: [Hardware Error]: PROCESSOR 0:906e9 TIME 1581946905 SOCKET 0 APIC 0 microcode ca
[ 0.652963] microcode: sig=0x906e9, pf=0x20, revision=0xca
[ 0.653165] microcode: Microcode Update Driver: v2.2.

$ dpkg -l | grep micro
ii amd64-microcode 3.20191021.1+really3.20181128.1ubuntu2 amd64 Processor microcode firmware for AMD CPUs
ii intel-microcode 3.20191115.1ubuntu0.19.10.2 amd64 Processor microcode firmware for Intel CPUs
ii iucode-tool 2.3.1-1 amd64 Intel processor microcode tool
ii libxmuu1:amd64

Revision history for this message
You-Sheng Yang (vicamo) wrote :

@alvarofernandoms maybe your case is different. Please file a new bug instead, add following kernel parameters and take some pictures when your systems hangs:

  initcall_debug ignore_loglevel=1 earlycon=efifb

And don't forget to remove the default parameters "quiet splash".

Revision history for this message
Álvaro Souza (alvarofernandoms) wrote :

Hello everyone. The problem still here using Dell 7567, even in Ubuntu 20.04 kernel 5.4. But, following the suggestion of @danielgrebe in another bug report, I was able to boot after switching PTT Security off in BIOS. Thank you.

Font: https://bugs.launchpad.net/ubuntu/+source/intel-microcode/+bug/1853369/comments/42

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Duplicates of this bug

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.