Maverick update to 2.6.35.7 stable release

Accepted linux into maverick-proposed, the package will build now and be available in a few hours. Please test and give feedback here. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you in advance!

This bug was fixed in the package linux - 2.6.35-23.40

---------------
linux (2.6.35-23.40) maverick-proposed; urgency=low

  [ Brad Figg ]

  * No change rebuild.

linux (2.6.35-23.39) maverick-proposed; urgency=low

  [ Brad Figg ]
    - LP: #676214

  [ Ricardo Salveti de Araujo ]

  * SAUCE: ARM: OMAP3: beagle: use GPIO2 on the xM A3 to turn DVI on
    - LP: #663642

linux (2.6.35-23.38) maverick-proposed; urgency=low

  [ Brad Figg ]

  * Revert "SAUCE: ARM: OMAP3: beagle: use GPIO2 on the xM A3 to turn DVI
    on"

  [ Upstream Kernel Changes ]

  * Revert "(upstream) ALSA: hda - Apply ALC269 VAIO fix-up to all Sony
    laptops with ALC269"
  * Revert "ALSA: HDA: Correctly apply position_fix quirks for ATI and VIA
    controllers"
  * Buglink Fixup for reverted unverified fixes

linux (2.6.35-23.37) maverick-proposed; urgency=low

  [ Brad Figg ]

  * ARM: Temporarily disable module check for armel

linux (2.6.35-23.36) maverick-proposed; urgency=low

  [ Andy Whitcroft ]

  * reduce disk usage during buildd builds
    - LP: #645653

  [ Brad Figg ]

  * ARM: Temporarily disable module check for armel

  [ Enric Balletbo i Serra ]

  * ARM: igepv2: Adding support for VBUS and overcurrent
    - LP: #651589
  * ARM: igepv2: Fix and improve LED handling
    - LP: #654582
  * ARM: igepv2: Introduce function to dectect HW version
    - LP: #654586
  * ARM: igepv2: Fix handling of GPIOs for WLAN-BT combo
    - LP: #654590
  * ARM: igepv2: Add i2c eeprom driver to read EDID
    - LP: #654594
  * ARM: igepv2: Remove VMMC2 regulator
    - LP: #654595

  [ Leann Ogasawara ]

  * ARM: Temporarily disable module check for armel

  [ Mathieu Poirier ]

  * SAUCE: ARM: Add DSS2 support for Overo board
    - LP: #660811

  [ Maurus Cuelenaere ]

  * SAUCE: ARM: OMAP3: Add S-Video output to IGEPv2 board
    - LP: #607250

  [ Ricardo Salveti de Araujo ]

  * [Config] Remove CONFIG_FIXED_PHY and move CONFIG_SMSC911X from m to y
    for omap
    - LP: #645689
  * SAUCE: ARM: OMAP3: Adding vdd_sdi regulator supply to IGEPv2 board
    - LP: #607250
  * SAUCE: ARM: OMAP3: beagle: use GPIO2 on the xM A3 to turn DVI on
    - See: #663642

  [ Upstream Kernel Changes ]

  * Revert "(pre-stable) ALSA: HDA: Use model=auto for LG R510"
  * Revert "(pre-stable) ALSA: hda - Rename iMic to Int Mic on Lenovo
    NB0763"
  * Revert "Input: appletouch - fix integer overflow issue"
  * Revert "ALSA: hda - Handle pin NID 0x1a on ALC259/269"
  * Revert "ALSA: hda - Handle missing NID 0x1b on ALC259 codec"
  * Revert "(pre-stable) ALSA: hda - Add a new hp-laptop model for Conexant
    5066, tested on HP G60"
  * Revert "mmc: build fix: mmc_pm_notify is only available with
    CONFIG_PM=y"
  * Revert "mmc: fix all hangs related to mmc/sd card insert/removal during
    suspend/resume"
  * Revert "(pre-stable) bounce: call flush_dcache_page() after
    bounce_copy_vec()"
  * Revert "Input: i8042 - reset keyboard controller wehen resuming from
    S2R"
  * Revert "ALSA: HDA: Enable internal speaker on Dell M101z"
  * Revert "(pre-stable) drm/i915: don't enable self-refresh on Ironlake"
  * Revert "drm/i915: Allow LVDS on pipe A on gen4+"
  * (pre-stable) ACPI: enable repeated...