[Regression] Suspend to ram doesn't work anymore on Toshiba Portege M200

Binary package hint: acpi-support

After installing Edgy (from scratch, not an update), my notebook doesn't suspend to ram properly anymore: It goes to a state where HD, screen etc is off, but the power light is still on (it should start blinking in suspend mode) and then either .
* turns back on in about 5s (automatically, without being told so)
* or stays there and needs to be powercycled

This was working reliably in Dapper.

uname
Linux buz 2.6.17-10-386 #2 Fri Oct 13 18:41:40 UTC 2006 i686 GNU/Linux

dmesg
[17179569.184000] Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 2006 (Ubuntu 2.6.17-10.33-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000005ff30000 (usable)
[17179569.184000] BIOS-e820: 000000005ff30000 - 000000005ff40000 (ACPI data)
[17179569.184000] BIOS-e820: 000000005ff40000 - 000000005fff0000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 639MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 393008
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 163632 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fa850
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x06000517 MSFT 0x00000097) @ 0x5ff30000
[17179569.184000] ACPI: FADT (v001 A M I OEMFACP 0x06000517 MSFT 0x00000097) @ 0x5ff30200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x06000517 MSFT 0x00000097) @ 0x5ff30390
[17179569.184000] ACPI: OEMB (v001 A M I OEMBIOS 0x06000517 MSFT 0x00000097) @ 0x5ff40040
[17179569.184000] ACPI: DSDT (v001 A0058 A0058002 0x00000002 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 70000000 (gap: 60000000:9ff80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=6a397c48-bb21-468a-a6cc-5ae519914d2e ro vga=0x324 quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1602.351 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour dummy device 80x25
[17179570.100000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.100000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.140000] Memory: 1547568k/1572032k available (1829k kernel code, 23256k reserved, 1038k data, 288k init, 654528k highmem)
[17179570.140000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.220000] Calibrating delay using timer specific routine.. 3208.47 BogoMIPS (lpj=6416956)
[17179570.220000] Security Framework v1.0.0 initialized
[17179570.220000] SELinux: Disabled at boot.
[17179570.220000] Mount-cache hash table entries: 512
[17179570.220000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.220000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.220000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.220000] CPU: L2 Cache: 256K (64 bytes/line)
[17179570.220000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179570.220000] CPU: AMD Sempron(tm) Processor 2800+ stepping 02
[17179570.220000] Checking 'hlt' instruction... OK.
[17179570.236000] SMP alternatives: switching to UP code
[17179570.236000] Freeing SMP alternatives: 0k freed
[17179570.236000] checking if image is initramfs... it is
[17179570.896000] Freeing initrd memory: 6588k freed
[17179570.896000] ACPI: Core revision 20060707
[17179570.896000] ACPI: Looking for DSDT ... not found!
[17179570.900000] ENABLING IO-APIC IRQs
[17179570.900000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[17179571.044000] NET: Registered protocol family 16
[17179571.044000] EISA bus registered
[17179571.044000] ACPI: bus type pci registered
[17179571.044000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[17179571.044000] PCI: Using configuration type 1
[17179571.044000] Setting up standard PCI resources
[17179571.052000] ACPI: Interpreter enabled
[17179571.052000] ACPI: Using IOAPIC for interrupt routing
[17179571.052000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.052000] PCI: Probing PCI hardware (bus 00)
[17179571.056000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[17179571.056000] PCI: Quirk-MSI-K8T Soundcard On
[17179571.056000] PCI: Unexpected Value in PCI-Register: no Change!
[17179571.056000] PCI: enabled onboard AC97/MC97 devices
[17179571.056000] Boot video device is 0000:01:00.0
[17179571.056000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.068000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[17179571.072000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[17179571.072000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[17179571.072000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179571.072000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179571.072000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179571.072000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179571.072000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179571.072000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.072000] pnp: PnP ACPI init
[17179571.076000] pnp: PnP ACPI: found 12 devices
[17179571.076000] PnPBIOS: Disabled by ACPI PNP
[17179571.076000] PCI: Using ACPI for IRQ routing
[17179571.076000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.080000] PCI: Bridge: 0000:00:01.0
[17179571.080000] IO window: a000-afff
[17179571.080000] MEM window: f9100000-f96fffff
[17179571.080000] PREFETCH window: e1000000-f0ffffff
[17179571.080000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.080000] NET: Registered protocol family 2
[17179571.116000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.116000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179571.116000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.116000] TCP: Hash tables configured (established 262144 bind 65536)
[17179571.116000] TCP reno registered
[17179571.116000] audit: initializing netlink socket (disabled)
[17179571.116000] audit(1161071116.116:1): initialized
[17179571.116000] highmem bounce pool size: 64 pages
[17179571.116000] VFS: Disk quotas dquot_6.5.1
[17179571.116000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.116000] Initializing Cryptographic API
[17179571.116000] io scheduler noop registered
[17179571.116000] io scheduler anticipatory registered
[17179571.116000] io scheduler deadline registered
[17179571.116000] io scheduler cfq registered (default)
[17179571.116000] isapnp: Scanning for PnP cards...
[17179571.472000] isapnp: No Plug & Play device found
[17179571.492000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.492000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.492000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.492000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.492000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.492000] mice: PS/2 mouse device common for all mice
[17179571.492000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.492000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.492000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.492000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179571.492000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179571.492000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.492000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.492000] EISA: Probing bus 0 at eisa.0
[17179571.492000] Cannot allocate resource for EISA slot 1
[17179571.492000] EISA: Detected 0 cards.
[17179571.492000] TCP bic registered
[17179571.492000] NET: Registered protocol family 1
[17179571.492000] NET: Registered protocol family 8
[17179571.492000] NET: Registered protocol family 20
[17179571.492000] Using IPI Shortcut mode
[17179571.492000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.492000] Freeing unused kernel memory: 288k freed
[17179571.540000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.548000] vesafb: framebuffer at 0xec000000, mapped to 0xf8880000, using 10240k, total 65536k
[17179571.548000] vesafb: mode is 1280x1024x32, linelength=5120, pages=11
[17179571.548000] vesafb: protected mode interface info at c000:56be
[17179571.548000] vesafb: scrolling: redraw
[17179571.548000] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[17179571.824000] Console: switching to colour frame buffer device 160x64
[17179571.824000] fb0: VESA VGA frame buffer device
[17179573.044000] Capability LSM initialized
[17179573.624000] SCSI subsystem initialized
[17179573.628000] libata version 1.20 loaded.
[17179573.628000] sata_via 0000:00:0f.0: version 1.1
[17179573.628000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[17179573.628000] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9
[17179573.628000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179573.628000] ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 169
[17179573.628000] ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 169
[17179573.792000] scsi0 : sata_via
[17179573.956000] ata2: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f
[17179573.956000] ata2: dev 0 ATA-7, max UDMA/133, 240121728 sectors: LBA
[17179573.964000] ata2: dev 0 configured for UDMA/133
[17179573.964000] scsi1 : sata_via
[17179573.964000] Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5
[17179573.964000] Type: Direct-Access ANSI SCSI revision: 05
[17179573.968000] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
[17179573.968000] sda: Write Protect is off
[17179573.968000] sda: Mode Sense: 00 3a 00 00
[17179573.968000] SCSI device sda: drive cache: write back
[17179573.968000] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
[17179573.968000] sda: Write Protect is off
[17179573.968000] sda: Mode Sense: 00 3a 00 00
[17179573.968000] SCSI device sda: drive cache: write back
[17179573.968000] sda: sda1 sda2
[17179573.984000] sd 1:0:0:0: Attached scsi disk sda
[17179574.140000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179574.140000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179574.140000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179574.140000] VP_IDE: chipset revision 6
[17179574.140000] VP_IDE: not 100% native mode: will probe irqs later
[17179574.140000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179574.140000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[17179574.140000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
[17179574.140000] Probing IDE interface ide0...
[17179574.556000] hda: SAMSUNG SP1213N, ATA DISK drive
[17179574.836000] hdb: SAMSUNG SP1213N, ATA DISK drive
[17179574.892000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.892000] Probing IDE interface ide1...
[17179576.036000] hdd: BENQ DVD DD DW1640, ATAPI CD/DVD-ROM drive
[17179576.092000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.096000] hda: max request size: 512KiB
[17179576.108000] hda: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[17179576.112000] hda: cache flushes supported
[17179576.112000] hda: hda1 hda2
[17179576.116000] hdb: max request size: 512KiB
[17179576.120000] hdb: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[17179576.120000] hdb: cache flushes supported
[17179576.120000] hdb: hdb1
[17179576.144000] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.144000] Uniform CD-ROM driver Revision: 3.20
[17179576.404000] ieee1394: Initialized config rom entry `ip1394'
[17179576.404000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179576.404000] PCI: Via IRQ fixup for 0000:00:07.0, from 11 to 1
[17179576.468000] usbcore: registered new driver usbfs
[17179576.468000] usbcore: registered new driver hub
[17179576.468000] USB Universal Host Controller Interface driver v3.0
[17179576.536000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177] MMIO=[fd700000-fd7007ff] Max Packet=[2048] IR/IT contexts=[4/8]
[17179576.540000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 185
[17179576.540000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9
[17179576.540000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179576.540000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179576.540000] uhci_hcd 0000:00:10.0: irq 185, io base 0x0000b000
[17179576.540000] usb usb1: configuration #1 chosen from 1 choice
[17179576.540000] hub 1-0:1.0: USB hub found
[17179576.540000] hub 1-0:1.0: 2 ports detected
[17179576.644000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 185
[17179576.644000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 9
[17179576.644000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179576.644000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179576.644000] uhci_hcd 0000:00:10.1: irq 185, io base 0x0000b400
[17179576.644000] usb usb2: configuration #1 chosen from 1 choice
[17179576.644000] hub 2-0:1.0: USB hub found
[17179576.644000] hub 2-0:1.0: 2 ports detected
[17179576.748000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 185
[17179576.748000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 9
[17179576.748000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179576.748000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179576.748000] uhci_hcd 0000:00:10.2: irq 185, io base 0x0000b800
[17179576.748000] usb usb3: configuration #1 chosen from 1 choice
[17179576.748000] hub 3-0:1.0: USB hub found
[17179576.748000] hub 3-0:1.0: 2 ports detected
[17179576.852000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 185
[17179576.852000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 9
[17179576.852000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179576.852000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179576.852000] uhci_hcd 0000:00:10.3: irq 185, io base 0x0000c000
[17179576.852000] usb usb4: configuration #1 chosen from 1 choice
[17179576.852000] hub 4-0:1.0: USB hub found
[17179576.852000] hub 4-0:1.0: 2 ports detected
[17179576.884000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[17179576.988000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 185
[17179576.988000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 9
[17179576.988000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179576.988000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179576.988000] ehci_hcd 0000:00:10.4: irq 185, io mem 0xfdd00000
[17179576.988000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.988000] usb usb5: configuration #1 chosen from 1 choice
[17179576.988000] hub 5-0:1.0: USB hub found
[17179576.988000] hub 5-0:1.0: 8 ports detected
[17179577.200000] kjournald starting. Commit interval 5 seconds
[17179577.200000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.408000] usb 1-1: device not accepting address 2, error -71
[17179577.812000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000000ab3d]
[17179578.900000] usb 1-1: new low speed USB device using uhci_hcd and address 4
[17179579.064000] usb 1-1: configuration #1 chosen from 1 choice
[17179590.004000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 193
[17179590.004000] skge 1.5 addr 0xfdb00000 irq 193 chip Yukon-Lite rev 9
[17179590.004000] skge eth0: addr 00:11:d8:45:a0:3a
[17179590.012000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.064000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.124000] Linux video capture interface: v1.00
[17179590.192000] cx2388x v4l2 driver version 0.0.5 loaded
[17179590.192000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 193
[17179590.192000] CORE cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
[17179590.192000] TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
[17179590.420000] tveeprom 0-0050: Hauppauge model 34514, rev E147, serial# 6632931
[17179590.420000] tveeprom 0-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
[17179590.420000] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
[17179590.420000] tveeprom 0-0050: audio processor is CX881 (idx 31)
[17179590.420000] tveeprom 0-0050: has radio
[17179590.420000] cx88[0]: warning: unknown hauppauge model #34514
[17179590.420000] cx88[0]: hauppauge eeprom: model=34514
[17179590.420000] input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input1
[17179590.420000] cx88[0]/0: found at 0000:00:0c.0, rev: 3, irq: 193, latency: 64, mmio: 0xfb000000
[17179590.440000] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[17179590.440000] tuner 0-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
[17179590.512000] cx88[0]/0: registered device video0 [v4l2]
[17179590.512000] cx88[0]/0: registered device vbi0
[17179590.512000] cx88[0]/0: registered device radio0
[17179590.896000] cx2388x alsa driver version 0.0.5 loaded
[17179590.896000] ACPI: PCI Interrupt 0000:00:0c.1[A] -> GSI 17 (level, low) -> IRQ 193
[17179591.012000] Real Time Clock Driver v1.12ac
[17179591.016000] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[17179591.020000] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[17179591.020000] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 201
[17179591.020000] PCI: Via IRQ fixup for 0000:00:11.6, from 0 to 9
[17179591.220000] Linux agpgart interface v0.101 (c) Dave Jones
[17179591.320000] Floppy drive(s): fd0 is 1.44M
[17179591.336000] FDC 0 is a post-1991 82077
[17179591.468000] input: PC Speaker as /class/input/input2
[17179591.776000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[17179591.852000] usbcore: registered new driver hiddev
[17179591.872000] input: Logitech USB Mouse as /class/input/input3
[17179591.876000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:10.0-1
[17179591.876000] usbcore: registered new driver usbhid
[17179591.876000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179591.884000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[17179592.280000] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[17179592.280000] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[17179592.280000] agpgart: Detected AGP bridge 0
[17179592.280000] agpgart: AGP aperture is 64M @ 0xf4000000
[17179592.280000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
[17179592.280000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9
[17179592.280000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179592.524000] skge eth0: enabling interface
[17179592.536000] ts: Compaq touchscreen protocol output
[17179592.792000] codec_read: codec 0 is not valid [0xfe0000]
[17179592.800000] codec_read: codec 0 is not valid [0xfe0000]
[17179592.808000] codec_read: codec 0 is not valid [0xfe0000]
[17179592.812000] codec_read: codec 0 is not valid [0xfe0000]
[17179593.068000] lp: driver loaded but no devices found
[17179593.096000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179593.096000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179593.396000] fuse init (API version 7.6)
[17179593.504000] EXT3 FS on sda1, internal journal
[17179593.584000] NET: Registered protocol family 17
[17179593.696000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179593.696000] md: bitmap version 4.39
[17179593.844000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: <email address hidden>
[17179594.228000] skge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rx
[17179596.124000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[17179596.124000] SGI XFS Quota Management subsystem
[17179596.132000] XFS mounting filesystem hdb1
[17179596.224000] Ending clean XFS mount for filesystem: hdb1
[17179596.288000] XFS mounting filesystem sda2
[17179596.400000] Ending clean XFS mount for filesystem: sda2
[17179598.392000] ACPI: Power Button (FF) [PWRF]
[17179598.392000] ACPI: Power Button (CM) [PWRB]
[17179598.392000] ACPI: Sleep Button (CM) [SLPB]
[17179598.504000] ibm_acpi: ec object not found
[17179598.584000] pcc_acpi: loading...
[17179601.836000] NET: Registered protocol family 10
[17179601.836000] lo: Disabled Privacy Extensions
[17179601.836000] IPv6 over IPv4 tunneling driver
[17179605.132000] [drm] Initialized drm 1.0.1 20051102
[17179605.136000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179605.140000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[17179605.988000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179605.988000] agpgart: Device is in legacy mode, falling back to 2.x
[17179605.988000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
[17179605.988000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
[17179606.284000] [drm] Setting GART location based on new memory map
[17179606.284000] [drm] Loading R200 Microcode
[17179606.284000] [drm] writeback test succeeded in 1 usecs
[17179614.460000] vmmon: module license 'unspecified' taints kernel.
[17179614.464000] /dev/vmmon[4742]: Module vmmon: registered with major=10 minor=165
[17179614.464000] /dev/vmmon[4742]: Module vmmon: initialized
[17179614.828000] /dev/vmnet: open called by PID 4764 (vmnet-bridge)
[17179614.828000] /dev/vmnet: hub 0 does not exist, allocating memory.
[17179614.828000] /dev/vmnet: port on hub 0 successfully opened
[17179614.832000] bridge-eth0: enabling the bridge
[17179614.832000] bridge-eth0: up
[17179614.832000] bridge-eth0: already up
[17179614.832000] bridge-eth0: attached
[17179615.092000] /dev/vmnet: open called by PID 4778 (vmnet-natd)
[17179615.092000] /dev/vmnet: hub 8 does not exist, allocating memory.
[17179615.092000] /dev/vmnet: port on hub 8 successfully opened
[17179617.184000] Bluetooth: Core ver 2.8
[17179617.184000] NET: Registered protocol family 31
[17179617.184000] Bluetooth: HCI device and connection manager initialized
[17179617.184000] Bluetooth: HCI socket layer initialized
[17179617.240000] Bluetooth: L2CAP ver 2.8
[17179617.240000] Bluetooth: L2CAP socket layer initialized
[17179617.304000] Bluetooth: RFCOMM socket layer initialized
[17179617.304000] Bluetooth: RFCOMM TTY layer initialized
[17179617.304000] Bluetooth: RFCOMM ver 1.7
[17179617.768000] eth0: no IPv6 routers present
[17179624.896000] /dev/vmnet: open called by PID 5104 (vmnet-netifup)
[17179624.896000] /dev/vmnet: port on hub 8 successfully opened
[17179624.904000] /dev/vmnet: open called by PID 5105 (vmnet-netifup)
[17179624.904000] /dev/vmnet: hub 1 does not exist, allocating memory.
[17179624.904000] /dev/vmnet: port on hub 1 successfully opened
[17179625.224000] /dev/vmnet: open called by PID 5131 (vmnet-dhcpd)
[17179625.224000] /dev/vmnet: port on hub 1 successfully opened
[17179625.244000] /dev/vmnet: open called by PID 5116 (vmnet-dhcpd)
[17179625.244000] /dev/vmnet: port on hub 8 successfully opened
[17179634.932000] vmnet1: no IPv6 routers present
[17179635.020000] vmnet8: no IPv6 routers present
buz@buz:/tmp$
buz@buz:/tmp$ logout
Connection to 10.2.2.20 closed.
buz@buznote:~$ dmesg
[17179569.184000] Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 2006 (Ubuntu 2.6.17-10.33-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[17179569.184000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000002ffc0000 (usable)
[17179569.184000] BIOS-e820: 000000002ffc0000 - 000000002ffd0000 (reserved)
[17179569.184000] BIOS-e820: 000000002ffd0000 - 000000002ffe0000 (ACPI data)
[17179569.184000] BIOS-e820: 000000002ffe0000 - 0000000030000000 (reserved)
[17179569.184000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 767MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 196544
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 192448 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 TOSHIB ) @ 0x000f0210
[17179569.184000] ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x2ffd0000
[17179569.184000] ACPI: FADT (v002 TOSHIB 750 0x20030101 TASM 0x04010000) @ 0x2ffd005c
[17179569.184000] ACPI: SSDT (v001 TOSHIB A0009 0x20040107 MSFT 0x0100000e) @ 0x2ffd453a
[17179569.184000] ACPI: DBGP (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x2ffd00e0
[17179569.184000] ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x2ffd0034
[17179569.184000] ACPI: DSDT (v001 TOSHIB A0009 0x20040107 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xd808
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 30000000:ceda0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda2 ro
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (01603000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1596.846 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.612000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.612000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.660000] Memory: 769940k/786176k available (1829k kernel code, 15652k reserved, 1038k data, 288k init, 0k highmem)
[17179569.660000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.740000] Calibrating delay using timer specific routine.. 3197.51 BogoMIPS (lpj=6395029)
[17179569.740000] Security Framework v1.0.0 initialized
[17179569.740000] SELinux: Disabled at boot.
[17179569.740000] Mount-cache hash table entries: 512
[17179569.740000] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[17179569.740000] CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[17179569.740000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179569.740000] CPU: L2 cache: 1024K
[17179569.740000] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
[17179569.740000] CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05
[17179569.740000] Checking 'hlt' instruction... OK.
[17179569.756000] SMP alternatives: switching to UP code
[17179569.756000] Freeing SMP alternatives: 0k freed
[17179569.756000] checking if image is initramfs... it is
[17179570.884000] Freeing initrd memory: 5135k freed
[17179570.884000] ACPI: Core revision 20060707
[17179570.884000] ACPI: Looking for DSDT ... not found!
[17179570.888000] ACPI: System reset via FADT Reset Register is supported
[17179570.888000] machine_reset = acpi_machine_reset
[17179570.888000] ACPI: setting ELCR to 0200 (from 0e00)
[17179570.888000] NET: Registered protocol family 16
[17179570.892000] EISA bus registered
[17179570.892000] ACPI: bus type pci registered
[17179570.892000] PCI: PCI BIOS revision 2.10 entry at 0xfd893, last bus=4
[17179570.892000] PCI: Using configuration type 1
[17179570.892000] Setting up standard PCI resources
[17179570.896000] ACPI: Interpreter enabled
[17179570.896000] ACPI: Using PIC for interrupt routing
[17179570.900000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11)
[17179570.900000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
[17179570.904000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
[17179570.904000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
[17179570.904000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
[17179570.908000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
[17179570.908000] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[17179570.908000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
[17179570.908000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.908000] PCI: Probing PCI hardware (bus 00)
[17179570.912000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179570.916000] PCI quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO
[17179570.916000] PCI quirk: region eec0-eeff claimed by ICH4 GPIO
[17179570.916000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179570.916000] Boot video device is 0000:01:00.0
[17179570.916000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.916000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.920000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179570.924000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179570.928000] ACPI: Power Resource [PFAN] (off)
[17179570.928000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.928000] pnp: PnP ACPI init
[17179570.940000] pnp: PnP ACPI: found 12 devices
[17179570.940000] PnPBIOS: Disabled by ACPI PNP
[17179570.940000] PCI: Using ACPI for IRQ routing
[17179570.940000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.948000] pnp: 00:08: ioport range 0x1e0-0x1e7 has been reserved
[17179570.948000] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
[17179570.948000] PCI: Bridge: 0000:00:01.0
[17179570.948000] IO window: disabled.
[17179570.948000] MEM window: fd000000-fdffffff
[17179570.948000] PREFETCH window: d0000000-dfffffff
[17179570.948000] PCI: Bus 3, cardbus bridge: 0000:02:0b.0
[17179570.948000] IO window: 0000c000-0000c0ff
[17179570.948000] IO window: 0000c400-0000c4ff
[17179570.948000] PREFETCH window: 40000000-41ffffff
[17179570.948000] MEM window: 44000000-45ffffff
[17179570.948000] PCI: Bridge: 0000:00:1e.0
[17179570.948000] IO window: c000-cfff
[17179570.948000] MEM window: fce00000-fcefffff
[17179570.948000] PREFETCH window: 40000000-41ffffff
[17179570.948000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.948000] PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
[17179570.952000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179570.952000] PCI: setting IRQ 11 as level-triggered
[17179570.952000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179570.952000] NET: Registered protocol family 2
[17179570.988000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.988000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.988000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.988000] TCP: Hash tables configured (established 131072 bind 65536)
[17179570.988000] TCP reno registered
[17179570.988000] Simple Boot Flag at 0x7c set to 0x1
[17179570.992000] audit: initializing netlink socket (disabled)
[17179570.992000] audit(1161078953.992:1): initialized
[17179570.992000] VFS: Disk quotas dquot_6.5.1
[17179570.992000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.992000] Initializing Cryptographic API
[17179570.992000] io scheduler noop registered
[17179570.992000] io scheduler anticipatory registered
[17179570.992000] io scheduler deadline registered
[17179570.992000] io scheduler cfq registered (default)
[17179570.992000] isapnp: Scanning for PnP cards...
[17179571.356000] isapnp: No Plug & Play device found
[17179571.408000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.408000] 00:09: ttyS0 at I/O 0x338 (irq = 4) is a 16550A
[17179571.412000] PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
[17179571.412000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[17179571.412000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179571.412000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[17179571.412000] mice: PS/2 mouse device common for all mice
[17179571.412000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.412000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.412000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.412000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.420000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.420000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.420000] EISA: Probing bus 0 at eisa.0
[17179571.420000] Cannot allocate resource for EISA slot 1
[17179571.420000] EISA: Detected 0 cards.
[17179571.420000] TCP bic registered
[17179571.420000] NET: Registered protocol family 1
[17179571.420000] NET: Registered protocol family 8
[17179571.420000] NET: Registered protocol family 20
[17179571.420000] Using IPI Shortcut mode
[17179571.420000] ACPI: (supports S0 S3 S4 S5)
[17179571.424000] Freeing unused kernel memory: 288k freed
[17179571.444000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.512000] Capability LSM initialized
[17179571.568000] ACPI: Transitioning device [FAN] to D3
[17179571.568000] ACPI: Transitioning device [FAN] to D3
[17179571.568000] ACPI: Fan [FAN] (off)
[17179571.576000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179571.580000] ACPI: Thermal Zone [THRM] (26 C)
[17179572.092000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[17179572.092000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[17179572.092000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179572.092000] ICH4: chipset revision 3
[17179572.092000] ICH4: not 100% native mode: will probe irqs later
[17179572.092000] ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
[17179572.092000] Probing IDE interface ide0...
[17179572.384000] hda: HTS548060M9AT00, ATA DISK drive
[17179573.056000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.084000] hda: max request size: 512KiB
[17179573.084000] hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
[17179573.084000] hda: cache flushes supported
[17179573.084000] hda: hda1 hda2 hda3 hda4
[17179573.448000] Probing IDE interface ide1...
[17179573.508000] usbcore: registered new driver usbfs
[17179573.508000] usbcore: registered new driver hub
[17179573.512000] USB Universal Host Controller Interface driver v3.0
[17179573.512000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[17179573.512000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179573.512000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179573.512000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179573.516000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179573.516000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000efe0
[17179573.516000] usb usb1: configuration #1 chosen from 1 choice
[17179573.516000] hub 1-0:1.0: USB hub found
[17179573.516000] hub 1-0:1.0: 2 ports detected
[17179573.620000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179573.620000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179573.620000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179573.620000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179573.620000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000ef80
[17179573.620000] usb usb2: configuration #1 chosen from 1 choice
[17179573.624000] hub 2-0:1.0: USB hub found
[17179573.624000] hub 2-0:1.0: 2 ports detected
[17179573.728000] PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
[17179573.728000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179573.728000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179573.728000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179573.728000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179573.728000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x000018c0
[17179573.728000] usb usb3: configuration #1 chosen from 1 choice
[17179573.728000] hub 3-0:1.0: USB hub found
[17179573.728000] hub 3-0:1.0: 2 ports detected
[17179573.832000] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
[17179573.832000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[17179573.832000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[17179573.832000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179573.832000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179573.832000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[17179573.832000] ehci_hcd 0000:00:1d.7: debug port 1
[17179573.832000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179573.832000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0x42000000
[17179573.836000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179573.836000] usb usb4: configuration #1 chosen from 1 choice
[17179573.836000] hub 4-0:1.0: USB hub found
[17179573.836000] hub 4-0:1.0: 6 ports detected
[17179574.164000] kjournald starting. Commit interval 5 seconds
[17179574.164000] EXT3-fs: mounted filesystem with ordered data mode.
[17179574.224000] usb 4-3: new high speed USB device using ehci_hcd and address 2
[17179574.356000] usb 4-3: configuration #1 chosen from 1 choice
[17179574.356000] hub 4-3:1.0: USB hub found
[17179574.356000] hub 4-3:1.0: 4 ports detected
[17179574.676000] usb 4-3.4: new high speed USB device using ehci_hcd and address 3
[17179574.784000] usb 4-3.4: configuration #1 chosen from 1 choice
[17179574.784000] hub 4-3.4:1.0: USB hub found
[17179574.784000] hub 4-3.4:1.0: 4 ports detected
[17179575.092000] usb 4-3.4.3: new full speed USB device using ehci_hcd and address 4
[17179575.188000] usb 4-3.4.3: configuration #1 chosen from 1 choice
[17179575.392000] usb 4-3.4.4: new low speed USB device using ehci_hcd and address 5
[17179575.488000] usb 4-3.4.4: configuration #1 chosen from 1 choice
[17179587.388000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179587.396000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179587.536000] hw_random: RNG not detected
[17179587.792000] input: PC Speaker as /class/input/input1
[17179587.812000] PCI: Enabling device 0000:00:1f.5 (0000 -> 0003)
[17179587.812000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179587.812000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179587.880000] Real Time Clock Driver v1.12ac
[17179588.060000] input: PS/2 Mouse as /class/input/input2
[17179588.092000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[17179588.132000] pnp: Device 00:0b activated.
[17179588.132000] parport: PnPBIOS parport detected.
[17179588.132000] pnp: Device 00:0b disabled.
[17179588.636000] intel8x0_measure_ac97_clock: measured 55147 usecs
[17179588.636000] intel8x0: clocking to 48000
[17179589.508000] usbcore: registered new driver hiddev
[17179589.576000] input: Logitech USB Receiver as /class/input/input4
[17179589.576000] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-3.4.4
[17179589.624000] input: Logitech USB Receiver as /class/input/input5
[17179589.624000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-3.4.4
[17179589.624000] usbcore: registered new driver usbhid
[17179589.624000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179589.660000] usbcore: registered new driver usbserial
[17179589.660000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[17179589.660000] usbcore: registered new driver usbserial_generic
[17179589.660000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[17179589.724000] drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
[17179589.724000] ftdi_sio 4-3.4.3:1.0: FTDI USB Serial Device converter detected
[17179589.724000] drivers/usb/serial/ftdi_sio.c: Detected FT232BM
[17179589.724000] usb 4-3.4.3: FTDI USB Serial Device converter now attached to ttyUSB0
[17179589.724000] usbcore: registered new driver ftdi_sio
[17179589.724000] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
[17179589.744000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179589.744000] Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001]
[17179589.772000] e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
[17179589.772000] e100: Copyright(c) 1999-2005 Intel Corporation
[17179589.800000] Linux agpgart interface v0.101 (c) Dave Jones
[17179589.872000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[17179589.872000] Socket status: 30000087
[17179589.872000] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[17179589.872000] cs: IO port probe 0xc000-0xcfff: clean.
[17179589.872000] pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
[17179589.872000] pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x41ffffff
[17179589.884000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[17179589.884000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[17179589.932000] e100: eth0: e100_probe: addr 0xfcefe000, irq 11, MAC addr 00:0E:7B:5F:AC:17
[17179590.172000] ts: Compaq touchscreen protocol output
[17179590.204000] ieee80211_crypt: registered algorithm 'NULL'
[17179590.208000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179590.208000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[17179590.256000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq
[17179590.256000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[17179590.256000] Driver 'ipw2200' needs updating - please use bus_type methods
[17179590.256000] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179590.256000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[17179590.456000] nvidia: module license 'NVIDIA' taints kernel.
[17179591.924000] cs: IO port probe 0x100-0x3af: clean.
[17179591.928000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179591.928000] cs: IO port probe 0x820-0x8ff: clean.
[17179591.932000] cs: IO port probe 0xc00-0xcf7: clean.
[17179591.932000] cs: IO port probe 0xa00-0xaff: clean.
[17179592.120000] ipw2200: Radio Frequency Kill Switch is On:
[17179592.120000] Kill switch must be turned off for wireless networking to work.
[17179592.120000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[17179592.124000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[17179592.124000] PCI: setting IRQ 10 as level-triggered
[17179592.124000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
[17179592.124000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006
[17179592.552000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[17179592.648000] lp: driver loaded but no devices found
[17179592.704000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: <email address hidden>
[17179592.764000] Adding 1004052k swap on /dev/hda3. Priority:-1 extents:1 across:1004052k
[17179592.896000] EXT3 FS on hda2, internal journal
[17179593.368000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179593.440000] NTFS volume version 3.1.
[17179593.628000] NET: Registered protocol family 17
[17179595.384000] ACPI: AC Adapter [ADP1] (on-line)
[17179595.456000] ACPI: Battery Slot [BAT1] (battery present)
[17179595.492000] ACPI: Power Button (FF) [PWRF]
[17179595.492000] ACPI: Power Button (CM) [PWRB]
[17179595.492000] ACPI: Lid Switch [LID]
[17179595.684000] ibm_acpi: ec object not found
[17179595.732000] pcc_acpi: loading...
[17179595.884000] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19a-dev
[17179595.884000] toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
[17179595.884000] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
[17179595.884000] toshiba_acpi: ktoshkeyd will check 2 times per second
[17179595.916000] toshiba_acpi: Dropped 0 keys from the queue on startup
[17179595.920000] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[17179596.244000] NET: Registered protocol family 10
[17179596.248000] lo: Disabled Privacy Extensions
[17179596.248000] IPv6 over IPv4 tunneling driver
[17179606.540000] eth0: no IPv6 routers present
[17179621.416000] /dev/vmmon[4271]: Module vmmon: registered with major=10 minor=165
[17179621.420000] /dev/vmmon[4271]: Module vmmon: initialized