ali m5451 audio broken

I just upgraded to feisty. Previously, the audio worked fine, but now it seems to be totally broken; the module doesn't seem to be actually creating any mixers.

tail -2 /proc/asound/oss/sndstat

Mixers:
0: Conexant Cx20468 rev 1,Conexant

amixer
amixer: Mixer attach default error: No such device

lspci -nv
00:00.0 0600: 1002:cab0 (rev 13)
        Flags: bus master, 66MHz, medium devsel, latency 32
        Memory at d4000000 (32-bit, prefetchable) [size=64M]
        Memory at d0400000 (32-bit, prefetchable) [size=4K]
        I/O ports at 8090 [disabled] [size=4]
        Capabilities: <access denied>

00:01.0 0604: 1002:700f (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 99
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: d0100000-d01fffff
        Prefetchable memory behind bridge: e0000000-efffffff

00:02.0 0c03: 10b9:5237 (rev 03) (prog-if 10 [OHCI])
        Subsystem: 103c:0024
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at d0006000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:06.0 0401: 10b9:5451 (rev 02)
        Subsystem: 103c:0024
        Flags: bus master, medium devsel, latency 64, IRQ 5
        I/O ports at 8400 [size=256]
        Memory at d0007000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:07.0 0601: 10b9:1533
        Subsystem: 10b9:1533
        Flags: bus master, medium devsel, latency 0
        Capabilities: <access denied>

00:08.0 0703: 10b9:5457 (prog-if 00 [Generic])
        Subsystem: 103c:0024
        Flags: medium devsel, IRQ 3
        Memory at d0008000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at 8800 [size=256]
        Capabilities: <access denied>

00:09.0 0280: 14e4:4320 (rev 02)
        Subsystem: 0e11:00e7
        Flags: bus master, fast devsel, latency 64, IRQ 10
        Memory at d0004000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>

00:0a.0 0607: 1217:6972
        Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
        Memory at 28010000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 20000000-23fff000 (prefetchable)
        Memory window 1: 24000000-27fff000
        I/O window 0: 00001000-000010ff
        I/O window 1: 00001400-000014ff
        16-bit legacy interface ports at 0001

00:0c.0 0c00: 104c:8026 (prog-if 10 [OHCI])
        Subsystem: 103c:0024
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at d0009000 (32-bit, non-prefetchable) [size=2K]
        Memory at d0000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:10.0 0101: 10b9:5229 (rev c4) (prog-if b0)
        Subsystem: 103c:0024
        Flags: bus master, medium devsel, latency 32
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        I/O ports at 8080 [size=16]
        Capabilities: <access denied>

00:11.0 0680: 10b9:7101
        Subsystem: 103c:0024
        Flags: medium devsel

00:12.0 0200: 100b:0020
        Subsystem: 103c:0024
        Flags: bus master, medium devsel, latency 90, IRQ 11
        I/O ports at 8c00 [size=256]
        Memory at d000a000 (32-bit, non-prefetchable) [size=4K]
        [virtual] Expansion ROM at 28000000 [disabled] [size=64K]
        Capabilities: <access denied>

01:05.0 0300: 1002:4336 (prog-if 00 [VGA])
        Subsystem: 103c:0024
        Flags: bus master, stepping, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 10
        Memory at e0000000 (32-bit, prefetchable) [size=256M]
        I/O ports at 9000 [size=256]
        Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at d0120000 [disabled] [size=128K]
        Capabilities: <access denied>

 cat /proc/interrupts
           CPU0
  0: 535896 XT-PIC-XT timer
  1: 2774 XT-PIC-XT i8042
  2: 0 XT-PIC-XT cascade
  5: 4 XT-PIC-XT ALI 5451
  6: 3 XT-PIC-XT floppy
  8: 3 XT-PIC-XT rtc
  9: 25514 XT-PIC-XT acpi
 10: 38209 XT-PIC-XT ohci1394, ohci_hcd:usb1, bcm43xx, radeon@pci:0000:01:05.0
 11: 4 XT-PIC-XT eth0, yenta
 12: 524552 XT-PIC-XT i8042
 14: 12474 XT-PIC-XT ide0
 15: 14894 XT-PIC-XT ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0

cat /proc/asound/card0/codec97#0/ac97#0-0
0-0/0: Conexant Cx20468 rev 1

PCI Subsys Vendor: 0x0000
PCI Subsys Device: 0x0000

Capabilities : -reserved1- -headphone out-
DAC resolution : 18-bit
ADC resolution : 18-bit
3D enhancement : No 3D Stereo Enhancement

Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=0 AMAP DSA=0 VRA
Extended status : VRA
PCM front DAC : 48000Hz
PCM ADC : 48000Hz
Extended modem ID: codec=0 LIN1
Modem status : PRA(GPIO)
Line1 rate : 48000Hz

dmesg output:

[ 0.000000] Linux version 2.6.20-9-generic (root@rothera) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu3)) #2 SMP Mon Feb 26 03:01:44 UTC 2007 (Ubuntu 2.6.20-9.16-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000030000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001bdf0000 end: 000000001bef0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001bef0000 size: 000000000000f000 end: 000000001beff000 type: 3
[ 0.000000] copy_e820_map() start: 000000001beff000 size: 0000000000001000 end: 000000001bf00000 type: 4
[ 0.000000] copy_e820_map() start: 000000001bf00000 size: 0000000000100000 end: 000000001c000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fffc0000 size: 0000000000040000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[ 0.000000] BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 114416) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114416
[ 0.000000] HighMem 114416 -> 114416
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114416
[ 0.000000] On node 0 totalpages: 114416
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 861 pages used for memmap
[ 0.000000] Normal zone: 109459 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7290
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1bef8b67
[ 0.000000] ACPI: FADT (v001 ATI Raptor 0x06040000 ATI 0x000f4240) @ 0x1befee2b
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1befee9f
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1befeec7
[ 0.000000] ACPI: DSDT (v001 ATI U1_M1535 0x06040000 MSFT 0x0100000d) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3fc0000)
[ 0.000000] Detected 1855.139 MHz processor.
[ 12.611383] Built 1 zonelists. Total pages: 113523
[ 12.611390] Kernel command line: root=UUID=3cb823c6-7079-4912-a4ee-591e5c158c83 ro rootflags=data=writeback quiet splash
[ 12.611584] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 12.611598] mapped APIC to ffffd000 (0138b000)
[ 12.611604] Enabling fast FPU save and restore... done.
[ 12.611607] Enabling unmasked SIMD FPU exception support... done.
[ 12.611624] Initializing CPU#0
[ 12.611717] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 12.613254] Console: colour VGA+ 80x25
[ 12.613871] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.614242] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.634223] Memory: 442716k/457664k available (1979k kernel code, 14332k reserved, 882k data, 324k init, 0k highmem)
[ 12.634235] virtual kernel memory layout:
[ 12.634236] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 12.634238] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 12.634239] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 12.634241] lowmem : 0xc0000000 - 0xdbef0000 ( 446 MB)
[ 12.634242] .init : 0xc03d1000 - 0xc0422000 ( 324 kB)
[ 12.634243] .data : 0xc02eed54 - 0xc03cb6d4 ( 882 kB)
[ 12.634245] .text : 0xc0100000 - 0xc02eed54 (1979 kB)
[ 12.634248] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 12.711549] Calibrating delay using timer specific routine.. 3712.40 BogoMIPS (lpj=7424812)
[ 12.711614] Security Framework v1.0.0 initialized
[ 12.711626] SELinux: Disabled at boot.
[ 12.711649] Mount-cache hash table entries: 512
[ 12.711883] CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[ 12.711896] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 12.711899] CPU: L2 Cache: 512K (64 bytes/line)
[ 12.711903] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000
[ 12.711935] Checking 'hlt' instruction... OK.
[ 12.727725] SMP alternatives: switching to UP code
[ 12.728125] Freeing SMP alternatives: 11k freed
[ 12.728302] ACPI: Core revision 20060707
[ 12.733029] ACPI: setting ELCR to 0200 (from 0e28)
[ 12.734974] CPU0: AMD mobile AMD Athlon(tm) XP2500+ stepping 00
[ 12.734982] SMP motherboard not detected.
[ 12.734985] Local APIC not detected. Using dummy APIC emulation.
[ 12.735061] Brought up 1 CPUs
[ 12.735444] Booting paravirtualized kernel on bare hardware
[ 12.735560] Time: 2:47:39 Date: 02/02/107
[ 12.735620] NET: Registered protocol family 16
[ 12.735798] EISA bus registered
[ 12.735803] ACPI: bus type pci registered
[ 12.747878] PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=2
[ 12.747881] PCI: Using configuration type 1
[ 12.747883] Setting up standard PCI resources
[ 12.781416] ACPI: Interpreter enabled
[ 12.781420] ACPI: Using PIC for interrupt routing
[ 12.781742] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.781749] PCI: Probing PCI hardware (bus 00)
[ 12.782473] PCI quirk: region 8000-803f claimed by ali7101 ACPI
[ 12.782477] PCI quirk: region 8040-805f claimed by ali7101 SMB
[ 12.782603] Boot video device is 0000:01:05.0
[ 12.782688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.784665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 12.785834] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10)
[ 12.786113] ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
[ 12.786373] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10)
[ 12.786643] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 10) *9
[ 12.786909] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10) *0, disabled.
[ 12.787174] ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *10
[ 12.787475] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 10)
[ 12.787735] ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
[ 12.788006] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 10) *9
[ 12.792780] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.792803] pnp: PnP ACPI init
[ 12.796461] pnp: PnP ACPI: found 11 devices
[ 12.796467] PnPBIOS: Disabled by ACPI PNP
[ 12.796546] PCI: Using ACPI for IRQ routing
[ 12.796550] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.799002] pnp: 00:07: ioport range 0x40b-0x40b has been reserved
[ 12.799006] pnp: 00:07: ioport range 0x480-0x48f has been reserved
[ 12.799010] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 12.799013] pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 12.799016] pnp: 00:07: ioport range 0x8000-0x807f could not be reserved
[ 12.799312] PCI: Bridge: 0000:00:01.0
[ 12.799315] IO window: 9000-9fff
[ 12.799320] MEM window: d0100000-d01fffff
[ 12.799324] PREFETCH window: e0000000-efffffff
[ 12.799329] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[ 12.799331] IO window: 00001000-000010ff
[ 12.799335] IO window: 00001400-000014ff
[ 12.799339] PREFETCH window: 20000000-23ffffff
[ 12.799343] MEM window: 24000000-27ffffff
[ 12.799563] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 12.799567] PCI: setting IRQ 11 as level-triggered
[ 12.799571] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[ 12.799618] NET: Registered protocol family 2
[ 12.835479] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 12.835618] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 12.835985] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 12.836166] TCP: Hash tables configured (established 16384 bind 8192)
[ 12.836170] TCP reno registered
[ 12.847507] checking if image is initramfs... it is
[ 13.472786] Freeing initrd memory: 6679k freed
[ 13.473088] Simple Boot Flag at 0x36 set to 0x1
[ 13.473452] audit: initializing netlink socket (disabled)
[ 13.473477] audit(1172803660.024:1): initialized
[ 13.473627] VFS: Disk quotas dquot_6.5.1
[ 13.473654] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.473724] io scheduler noop registered
[ 13.473728] io scheduler anticipatory registered
[ 13.473731] io scheduler deadline registered
[ 13.473740] io scheduler cfq registered (default)
[ 13.473753] ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
[ 13.689898] Activating ISA DMA hang workarounds.
[ 13.690161] isapnp: Scanning for PnP cards...
[ 13.956679] isapnp: No Plug & Play device found
[ 13.987334] Real Time Clock Driver v1.12ac
[ 13.987413] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.987579] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.988483] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.989060] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
[ 13.989066] PCI: setting IRQ 3 as level-triggered
[ 13.989069] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3
[ 13.990415] 0000:00:08.0: ttyS1 at I/O 0x8828 (irq = 3) is a 8250
[ 13.991045] 0000:00:08.0: ttyS2 at I/O 0x8840 (irq = 3) is a 8250
[ 13.991475] 0000:00:08.0: ttyS3 at I/O 0x8850 (irq = 3) is a 8250
[ 13.991598] Couldn't register serial port 0000:00:08.0: -28
[ 13.991699] mice: PS/2 mouse device common for all mice
[ 13.992481] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.992832] input: Macintosh mouse button emulation as /class/input/input0
[ 13.992883] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 13.992889] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 13.993169] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 13.997484] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.997493] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.997696] EISA: Probing bus 0 at eisa.0
[ 13.997710] Cannot allocate resource for EISA slot 1
[ 13.997740] Cannot allocate resource for EISA slot 8
[ 13.997742] EISA: Detected 0 cards.
[ 14.027822] TCP cubic registered
[ 14.027831] NET: Registered protocol family 1
[ 14.027840] NET: Registered protocol family 8
[ 14.027842] NET: Registered protocol family 20
[ 14.027890] Using IPI No-Shortcut mode
[ 14.027975] ACPI: (supports S0 S3 S4 S5)
[ 14.028024] Magic number: 15:573:762
[ 14.028028] hash matches device serio0
[ 14.028945] Freeing unused kernel memory: 324k freed
[ 14.029321] Time: tsc clocksource has been installed.
[ 14.047924] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.259480] Capability LSM initialized
[ 15.297027] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 15.299320] ACPI: Thermal Zone [THRM] (70 C)
[ 15.981227] ieee1394: Initialized config rom entry `ip1394'
[ 15.983086] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 15.983093] PCI: setting IRQ 10 as level-triggered
[ 15.983097] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 16.033050] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0009000-d00097ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 16.059770] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 16.059774] originally by Donald Becker <email address hidden>
[ 16.059776] http://www.scyld.com/network/natsemi.html
[ 16.059777] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 16.060195] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 16.060200] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 16.062009] natsemi eth0: NatSemi DP8381[56] at 0xd000a000 (0000:00:12.0), 00:0d:9d:81:9c:4a, IRQ 11, port TP.
[ 16.088373] usbcore: registered new interface driver usbfs
[ 16.088410] usbcore: registered new interface driver hub
[ 16.088443] usbcore: registered new device driver usb
[ 16.089334] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 16.089765] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
[ 16.089770] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 16.089790] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 16.090105] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 16.090128] ohci_hcd 0000:00:02.0: irq 10, io mem 0xd0006000
[ 16.143699] SCSI subsystem initialized
[ 16.149191] libata version 2.00 loaded.
[ 16.195901] usb usb1: configuration #1 chosen from 1 choice
[ 16.195944] hub 1-0:1.0: USB hub found
[ 16.195964] hub 1-0:1.0: 4 ports detected
[ 3.452000] Time: acpi_pm clocksource has been installed.
[ 3.472000] alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.
[ 3.472000] ALI15X3: IDE controller at PCI slot 0000:00:10.0
[ 3.472000] ACPI: Unable to derive IRQ for device 0000:00:10.0
[ 3.472000] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
[ 3.476000] ALI15X3: chipset revision 196
[ 3.476000] ALI15X3: not 100% native mode: will probe irqs later
[ 3.476000] ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
[ 3.476000] ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:pio, hdd:pio
[ 3.476000] Probing IDE interface ide0...
[ 3.764000] hda: ST94011A, ATA DISK drive
[ 4.440000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.440000] Probing IDE interface ide1...
[ 4.476000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d9d719e81195e]
[ 5.176000] hdc: DW-224E-A, ATAPI CD/DVD-ROM drive
[ 5.848000] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.856000] hda: max request size: 128KiB
[ 6.412000] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 6.412000] hda: cache flushes supported
[ 6.412000] hda: hda1 hda2 hda3 < hda5 >
[ 6.480000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1658kB Cache, DMA
[ 6.480000] Uniform CD-ROM driver Revision: 3.20
[ 6.740000] kjournald starting. Commit interval 5 seconds
[ 6.740000] EXT3-fs: mounted filesystem with writeback data mode.
[ 11.808000] eth0: DSPCFG accepted after 0 usec.
[ 13.420000] input: PC Speaker as /class/input/input2
[ 13.896000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.948000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.004000] ieee80211_crypt: registered algorithm 'NULL'
[ 14.016000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 14.016000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 14.248000] Yenta: CardBus bridge found at 0000:00:0a.0 [0000:0000]
[ 14.248000] Yenta O2: res at 0x94/0xD4: 00/ea
[ 14.248000] Yenta O2: enabling read prefetch/write burst
[ 14.308000] FDC 0 is a post-1991 82077
[ 14.308000] parport: PnPBIOS parport detected.
[ 14.308000] pnp: Device 00:09 disabled.
[ 14.316000] Linux agpgart interface v0.101 (c) Dave Jones
[ 14.376000] Yenta: ISA IRQ mask 0x00b8, PCI irq 11
[ 14.376000] Socket status: 30000007
[ 14.376000] ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 14.376000] ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not inserted.
[ 14.404000] bcm43xx driver
[ 14.404000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 14.404000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 14.496000] agpgart: Detected Ati IGP320/M chipset
[ 14.508000] agpgart: AGP aperture is 64M @ 0xd4000000
[ 14.652000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
[ 14.688000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 14.988000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
[ 14.988000] PCI: setting IRQ 5 as level-triggered
[ 14.988000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
[ 15.128000] cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 15.128000] cs: IO port probe 0xc00-0xcf7: clean.
[ 15.132000] cs: IO port probe 0xa00-0xaff: clean.
[ 15.312000] NET: Registered protocol family 17
[ 17.688000] AC'97 1 does not respond - RESET
[ 17.704000] AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 17.704000] ali mixer 1 creating error.
[ 18.472000] lp: driver loaded but no devices found
[ 18.632000] ndiswrapper version 1.30 loaded (preempt=no,smp=yes)
[ 18.720000] usbcore: registered new interface driver ndiswrapper
[ 18.788000] fuse init (API version 7.8)
[ 19.072000] Adding 1204832k swap on /dev/disk/by-uuid/438c65b4-ea7b-4774-87bb-bc73d6ef2f3f. Priority:-1 extents:1 across:1204832k
[ 19.280000] EXT3 FS on hda2, internal journal
[ 19.612000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: <email address hidden>
[ 21.720000] ACPI: Battery Slot [BAT1] (battery present)
[ 21.920000] input: Power Button (FF) as /class/input/input4
[ 21.948000] ACPI: Power Button (FF) [PWRF]
[ 22.016000] input: Power Button (CM) as /class/input/input5
[ 22.048000] ACPI: Power Button (CM) [PWRB]
[ 22.100000] input: Lid Switch as /class/input/input6
[ 22.100000] ACPI: Lid Switch [LID]
[ 22.164000] ACPI: AC Adapter [ACAD] (on-line)
[ 22.184000] Using specific hotkey driver
[ 22.224000] No dock devices found.
[ 22.256000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 22.304000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13
[ 22.304000] ibm_acpi: http://ibm-acpi.sf.net/
[ 22.876000] powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
[ 22.880000] powernow: No PST tables match this cpuid (0x7a0)
[ 22.880000] powernow: This is indicative of a broken BIOS.
[ 22.880000] powernow: Trying ACPI perflib
[ 22.880000] powernow: Minimum speed 530 MHz. Maximum speed 1855 MHz.
[ 27.920000] cdrom: This disc doesn't have any tracks I recognize!
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1132
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
[ 28.804000] bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1134
[ 30.200000] NET: Registered protocol family 10
[ 30.200000] lo: Disabled Privacy Extensions
[ 30.200000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.200000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 33.604000] [drm] Initialized drm 1.1.0 20060810
[ 33.616000] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 33.620000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 34.928000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 34.928000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 34.928000] agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
[ 35.152000] [drm] Setting GART location based on new memory map
[ 35.152000] [drm] writeback test succeeded in 1 usecs
[ 73.792000] ieee80211_crypt: registered algorithm 'WEP'
[ 74.028000] SoftMAC: Open Authentication completed with 00:14:bf:10:a4:77
[ 74.032000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 89.884000] eth1: no IPv6 routers present
[ 218.820000] ACPI: PCI interrupt for device 0000:00:06.0 disabled