--- libusb-0.1.12.orig/debian/control +++ libusb-0.1.12/debian/control @@ -0,0 +1,63 @@ +Source: libusb +Section: libs +Priority: optional +Maintainer: Aurelien Jarno +Build-Depends: debhelper (>= 5.0.22), autotools-dev, pkg-config, docbook, docbook-dsssl, quilt +Standards-Version: 3.9.1 + +Package: libusb-0.1-4 +Priority: important +Section: libs +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Conflicts: libusb0, libccid (<< 0.9.2-3) +Replaces: libusb0 +Homepage: http://www.linux-usb.org/ +Description: userspace USB programming library + Library for programming USB applications without the knowledge + of Linux kernel internals. + +Package: libusb-dev +Section: libdevel +Architecture: any +Depends: libusb-0.1-4 (= ${binary:Version}), libc6-dev | libc-dev, ${misc:Depends} +Replaces: libusb0 (<< 1:0.1.5-1) +Homepage: http://www.linux-usb.org/ +Description: userspace USB programming library development files + Library for programming USB applications without the knowledge + of Linux kernel internals. + +Package: libusb++-0.1-4c2 +Section: libs +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Conflicts: libusb++-0.1-4 +Replaces: libusb++-0.1-4 +Suggests: hotplug +Homepage: http://www.linux-usb.org/ +Description: userspace C++ USB programming library + Library for programming USB applications without the knowledge + of Linux kernel internals. This is only for programs which use + the C++ interface. + +Package: libusb++-dev +Section: libdevel +Architecture: any +Depends: libusb++-0.1-4c2 (= ${binary:Version}), libusb-dev (= ${binary:Version}), libstdc++6-4.4-dev | libstdc++-dev, ${misc:Depends} +Homepage: http://www.linux-usb.org/ +Description: userspace C++ USB programming library development files + Library for programming USB applications without the knowledge + of Linux kernel internals. This is only for programs which use + the C++ interface. + +Package: libusb-0.1-udeb +XC-Package-Type: udeb +Section: debian-installer +Architecture: any +Depends: ${shlibs:Depends} +Homepage: http://www.linux-usb.org/ +Description: userspace USB programming library + Library for programming USB applications without the knowledge + of Linux kernel internals. + . + This is a minimal package for use in debian-installer. --- libusb-0.1.12.orig/debian/libusb-dev.install +++ libusb-0.1.12/debian/libusb-dev.install @@ -0,0 +1,6 @@ +usr/bin/libusb-config +usr/include/usb.h +usr/lib/libusb.a +usr/lib/libusb.la +usr/lib/libusb.so +usr/lib/pkgconfig/libusb.pc --- libusb-0.1.12.orig/debian/libusb-dev.doc-base +++ libusb-0.1.12/debian/libusb-dev.doc-base @@ -0,0 +1,15 @@ +Document: libusb-dev +Title: The libusb Developers Guide +Author: Johannes Erdfelt +Abstract: + This documentation will give an overview of how the v0.1 libusb API + works and relates to USB. + . + This documentation assumes that you have a good understanding of USB + and how it works. If you don't have a good understanding of USB, it + is recommended you obtain the USB v1.1 and/or v2.0 specs and read them. +Section: Programming + +Format: HTML +Index: /usr/share/doc/libusb-dev/html/index.html +Files: /usr/share/doc/libusb-dev/html/* --- libusb-0.1.12.orig/debian/changelog +++ libusb-0.1.12/debian/changelog @@ -0,0 +1,636 @@ +libusb (2:0.1.12-17) unstable; urgency=low + + * Add debian/patches/08_bus_location.diff to fill the location field + of the usb_bus structure while enumerating busses (closes: + bug#611958). + * Upgraded policy compliance to 3.9.1 (no changes). + + -- Aurelien Jarno Sun, 06 Feb 2011 16:37:53 +0100 + +libusb (2:0.1.12-16) unstable; urgency=low + + * Add debian/patches/07_altsetting_alloc.patch based on a patch from + Pawel Kot to fix crashes with some USB devices, due to calls to + free() with uninitialized pointers. + * Upgraded policy compliance to 3.9.0 (no changes). + + -- Aurelien Jarno Tue, 31 Aug 2010 20:01:39 +0200 + +libusb (2:0.1.12-15) unstable; urgency=low + + * Don't include config.guess/config.sub in 91_autoreconf.diff (closes: + bug#538675). + * Upgraded policy compliance to 3.8.4 (no changes). + + -- Aurelien Jarno Mon, 24 May 2010 23:54:07 +0200 + +libusb (2:0.1.12-14) unstable; urgency=low + + * Add debian/patches/06_bsd.diff to fix build with kFreeBSD headers + 8.0. + * Upgraded policy compliance to 3.8.3 (no changes). + + -- Aurelien Jarno Mon, 25 Jan 2010 11:17:49 +0100 + +libusb (2:0.1.12-13) unstable; urgency=low + + * Use quilt to manage patches. + * debian/rules: fix cross build support. + * Add debian/patches/05_emdebian.diff from Neil Williams + (closes: bug#492555). + + -- Aurelien Jarno Fri, 05 Sep 2008 11:43:10 +0200 + +libusb (2:0.1.12-12) unstable; urgency=low + + * Fix infinite loop when device are unplugged during a transfer (closes: + bug#485778). + * Upgraded policy compliance to 3.8.0 (no changes). + * Don't build documentation in the udeb target. + + -- Aurelien Jarno Thu, 12 Jun 2008 00:15:30 +0200 + +libusb (2:0.1.12-11) unstable; urgency=low + + * Add a build-depends on docbook (closes: bug#479572). + + -- Aurelien Jarno Mon, 05 May 2008 17:02:01 +0200 + +libusb (2:0.1.12-10) unstable; urgency=low + + * Use const for buffers in write functions (closes: bug#473814). + + -- Aurelien Jarno Sun, 06 Apr 2008 01:46:09 +0200 + +libusb (2:0.1.12-9) unstable; urgency=low + + * Support dpkg-buildpackage -j. + + -- Aurelien Jarno Tue, 01 Jan 2008 23:47:22 +0100 + +libusb (2:0.1.12-8) unstable; urgency=high + + * Provide a symlink /usr/lib/libusb-0.1.so.4 -> /lib/libusb-0.1.so.4 + to workaround dpkg-dev bugs. + + -- Aurelien Jarno Thu, 22 Nov 2007 11:27:16 +0100 + +libusb (2:0.1.12-7) unstable; urgency=low + + * Remove the Provides: line for the udeb (closes: bug#419607). + * Use the Homepage: tag in the description (closes: bug#416376). + + -- Aurelien Jarno Tue, 17 Apr 2007 00:25:30 +0200 + +libusb (2:0.1.12-6) unstable; urgency=low + + * Make the package binNMU safe. + + -- Aurelien Jarno Mon, 5 Mar 2007 21:25:54 +0100 + +libusb (2:0.1.12-5) unstable; urgency=low + + * Stop suggesting hotplug (closes: bug#409299). + + -- Aurelien Jarno Mon, 12 Feb 2007 23:10:33 +0100 + +libusb (2:0.1.12-4) unstable; urgency=low + + * Changed usb.h to make it ANSI compliant (closes: bug#315165). + + -- Aurelien Jarno Mon, 29 Jan 2007 01:07:07 +0100 + +libusb (2:0.1.12-3) unstable; urgency=low + + * Fixed the use of select for URB transfer. Thanks to Daniel + Jacobowitz for the patch (closes: bug#406644). + * Fixed usbpp.h (closes: bug#404901). + * Upgraded policy compliance to 3.7.2 (no changes). + + -- Aurelien Jarno Thu, 18 Jan 2007 23:12:15 +0100 + +libusb (2:0.1.12-2) unstable; urgency=low + + * Fix /usr/lib/libusb.so symlink (closes: bug#360426). + + -- Aurelien Jarno Sun, 2 Apr 2006 12:05:46 +0200 + +libusb (2:0.1.12-1) unstable; urgency=low + + * New upstream release (closes: bug#360228). + + -- Aurelien Jarno Fri, 31 Mar 2006 15:52:12 +0200 + +libusb (2:0.1.11-7) unstable; urgency=low + + * Fixed a build failure with GCC 4.1 (Closes: bug#357995). + * Really ship the C++ library (Closes: bug#358854). + + -- Aurelien Jarno Fri, 24 Mar 2006 21:25:17 +0100 + +libusb (2:0.1.11-6) unstable; urgency=low + + * Added a patch by Frans Pop (Closes: bug#356747): + - Add --add-udeb option for dh_makeshlibs which autogenerates the + udeb: lines for the shlibs file + - Build-depends on debhelper (>= 5.0.22). + + -- Aurelien Jarno Tue, 14 Mar 2006 00:17:48 +0100 + +libusb (2:0.1.11-5) unstable; urgency=low + + * Don't use AM_MAINTAINER_MODE, just touch configure before running it. + Thanks to Steve Langasek for reporting the problem and the explanation on + how AM_MAINTAINER_MODE works. + + -- Aurelien Jarno Thu, 2 Mar 2006 11:45:33 +0100 + +libusb (2:0.1.11-4) unstable; urgency=low + + * Fixed a memory leak calling usb_find_devices() successively. Patch + backported from CVS. + + -- Aurelien Jarno Fri, 27 Jan 2006 08:24:03 +0100 + +libusb (2:0.1.11-3) unstable; urgency=low + + * Fix the /usr/lib/libusb.so link. + + -- Aurelien Jarno Sun, 22 Jan 2006 20:07:11 +0100 + +libusb (2:0.1.11-2) unstable; urgency=low + + * Use %zd to print size_t types. Thanks to Kurt Roeckx for the hint + (closes: bug#349355). + + -- Aurelien Jarno Sun, 22 Jan 2006 18:08:38 +0100 + +libusb (2:0.1.11-1) unstable; urgency=low + + * New upstream version. + + -- Aurelien Jarno Fri, 20 Jan 2006 10:00:03 +0100 + +libusb (2:0.1.10a-22) unstable; urgency=low + + * Check /dev/bus/usb before /proc/bus/usb (closes: bug#336596). + + -- Aurelien Jarno Mon, 31 Oct 2005 18:05:39 +0100 + +libusb (2:0.1.10a-21) unstable; urgency=low + + * Changed the priority back to optional, except for libusb-0.1-4. + + -- Aurelien Jarno Sun, 21 Aug 2005 22:25:41 +0200 + +libusb (2:0.1.10a-20) unstable; urgency=low + + * Changed priority to important. + * Applied patch by Kay Sievers to prepare for the + upcoming changes in the Linux USB core, which will create real device + nodes in /dev with udev. + + -- Aurelien Jarno Wed, 17 Aug 2005 20:07:58 +0200 + +libusb (2:0.1.10a-19) unstable; urgency=low + + * Removed debconf warning if USB is not functional as the information + is already in README.Debian (closes: bug#322937). + + -- Aurelien Jarno Wed, 17 Aug 2005 18:41:50 +0200 + +libusb (2:0.1.10a-18) unstable; urgency=low + + * Remove debian/tmp-udeb in the clean target (closes: bug#319378). + * Bumped Standards-Version to 3.6.2 (no changes). + + -- Aurelien Jarno Thu, 21 Jul 2005 22:06:08 +0200 + +libusb (2:0.1.10a-17) unstable; urgency=low + + * Upload from Debconf 5. + * C++ ABI transition. Changed libusb++-0.1-4 into libusb++-0.1-4c2. + + -- Aurelien Jarno Mon, 11 Jul 2005 01:48:51 +0300 + +libusb (2:0.1.10a-16) unstable; urgency=low + + * Changed usb.h to make it ANSI compliant (closes: bug#315165). + + -- Aurelien Jarno Tue, 21 Jun 2005 07:27:15 +0200 + +libusb (2:0.1.10a-15) unstable; urgency=low + + * Fixed a typo in the German debconf translation (closes: bug#313779). + + -- Aurelien Jarno Wed, 15 Jun 2005 09:56:54 +0200 + +libusb (2:0.1.10a-14) unstable; urgency=low + + * Also produce an udeb library. Thanks to Colin Watson for the patch + (closes: bug#311477). + + -- Aurelien Jarno Wed, 1 Jun 2005 22:39:35 +0200 + +libusb (2:0.1.10a-13) unstable; urgency=low + + * Oops, this time really change the hotplug recommendation to a + suggestion (closes: bug#310909). + + -- Aurelien Jarno Sun, 29 May 2005 21:42:57 +0200 + +libusb (2:0.1.10a-12) unstable; urgency=low + + * Changed hotplug recommendation to a suggestion (closes: bug#310909). + + -- Aurelien Jarno Sun, 29 May 2005 16:37:57 +0200 + +libusb (2:0.1.10a-11) unstable; urgency=low + + * Updated German debconf translation. Thanks to Rene van Bevern (closes: + bug#310419). + + -- Aurelien Jarno Mon, 23 May 2005 19:23:07 +0200 + +libusb (2:0.1.10a-10) unstable; urgency=low + + * No changes. New version needed to be able to upload to + testing-proposed-updates. + + -- Aurelien Jarno Mon, 23 May 2005 01:43:16 +0200 + +libusb (2:0.1.10a-9) unstable; urgency=low + + * Added __attribute__ ((packed)) to USB descriptors structures. + + -- Aurelien Jarno Fri, 29 Apr 2005 01:30:54 +0200 + +libusb (2:0.1.10a-8) unstable; urgency=high + + * Conflicts with libccid (<< 0.9.2-3) as it seems to be buggy (closes: + bug#302492). + + -- Aurelien Jarno Fri, 1 Apr 2005 08:03:33 +0200 + +libusb (2:0.1.10a-7) unstable; urgency=low + + * Enable C++ libraries. + + -- Aurelien Jarno Sun, 20 Mar 2005 21:19:54 +0100 + +libusb (2:0.1.10a-6) unstable; urgency=high + + * Fix bashism in config script (closes: bug#298499, bug#298500). + + -- Aurelien Jarno Tue, 8 Mar 2005 00:07:53 +0100 + +libusb (2:0.1.10a-5) unstable; urgency=high + + * Disable debconf warning on GNU/kFreeBSD. + + -- Aurelien Jarno Sun, 6 Mar 2005 23:02:41 +0100 + +libusb (2:0.1.10a-4) unstable; urgency=high + + * Backported thread support from CVS. This was removed by the 0.1.9 + version, thus the urgency high. + * Added support for kfreebsd-gnu. Patch by Robert Millan. Thanks (closes: + bug#297883). + + -- Aurelien Jarno Sat, 5 Mar 2005 13:51:41 +0100 + +libusb (2:0.1.10a-3) unstable; urgency=high + + * Revert previous changes. That was only a workaround, the bug being in + libgphoto2. + + -- Aurelien Jarno Sun, 27 Feb 2005 12:58:11 +0100 + +libusb (1:0.1.10a-fixes.1) unstable; urgency=medium + + * Reduce requested block size to 4kB instead of 16kB (closes: bug#296708). + + -- Aurelien Jarno Sat, 26 Feb 2005 16:16:49 +0100 + +libusb (1:0.1.10a-1) unstable; urgency=low + + * New upstream version. + + -- Aurelien Jarno Fri, 18 Feb 2005 01:15:14 +0100 + +libusb (1:0.1.10-2) unstable; urgency=high + + * Really includes documentation libusb-dev. + + -- Aurelien Jarno Fri, 11 Feb 2005 22:48:54 +0100 + +libusb (1:0.1.10-1) unstable; urgency=high + + * New upstream version, which is the answer of the upstream author to + bug#294368 and throughput problems of version 0.1.9. + * Prepared everything for the C++ library, but don't actually build the + packages, this would probably be for post-sarge. + + -- Aurelien Jarno Fri, 11 Feb 2005 19:00:06 +0100 + +libusb (1:0.1.9-3) unstable; urgency=medium + + * Urgency set to medium so that fix for bug #294139 propagates to + testing quickly. + * Patched the loop condition so that transfers bigger than 16Ko + work (closes: bug#294368). + + -- Aurelien Jarno Wed, 9 Feb 2005 21:09:55 +0100 + +libusb (1:0.1.9-2) unstable; urgency=low + + * Added a fix to fetch the descriptors from the device is they are + only partially provided by the kernel (closes: bug#294139). + + -- Aurelien Jarno Wed, 9 Feb 2005 16:05:15 +0100 + +libusb (1:0.1.9-1) unstable; urgency=low + + * New upstream version. + + -- Aurelien Jarno Sun, 6 Feb 2005 14:11:05 +0100 + +libusb (1:0.1.8-17) unstable; urgency=high + + * Moved the library to /lib as it is need by some other tools during the + boot. + + -- Aurelien Jarno Sun, 26 Sep 2004 16:25:55 +0200 + +libusb (1:0.1.8-16) unstable; urgency=low + + * Fixed a typo in debian/config (closes: bug#259666). + + -- Aurelien Jarno Fri, 16 Jul 2004 09:15:25 +0200 + +libusb (1:0.1.8-15) unstable; urgency=low + + * Don't use XSI in debian/config (closes: bug#259449). + + -- Aurelien Jarno Wed, 14 Jul 2004 21:44:18 +0200 + +libusb (1:0.1.8-14) unstable; urgency=low + + * Fixed pkgconfig file. + + -- Aurelien Jarno Sun, 11 Jul 2004 16:08:54 +0200 + +libusb (1:0.1.8-13) unstable; urgency=low + + * Really include Italian debconf translation (closes: bug#251738). + + -- Aurelien Jarno Sun, 11 Jul 2004 02:57:37 +0200 + +libusb (1:0.1.8-12) unstable; urgency=low + + * Added support for pkgconfig (closes: bug#250925). + * Added Italian debconf translation. Thanks to Luca Monducci (closes: + bug#251738). + * Don't display debconf usbfs message if hotplug is installed (closes: #248847). + + -- Aurelien Jarno Sun, 11 Jul 2004 02:32:45 +0200 + +libusb (1:0.1.8-11) unstable; urgency=low + + * Added Catalan debconf translation. Thanks to Aleix Badia i Bosch + (closes: bug#248724). + + -- Aurelien Jarno Thu, 13 May 2004 00:55:33 +0200 + +libusb (1:0.1.8-10) unstable; urgency=low + + * Updated Dutch debconf translation. Thanks to Frans Pop (closes: + bug#244480). + * Added Czech debconf translation. Thanks to Miroslav Kure (closes: + bug#244420). + + -- Aurelien Jarno Sun, 18 Apr 2004 19:44:32 +0200 + +libusb (1:0.1.8-9) unstable; urgency=low + + * Don't use the -l option when calling mount (closes: bug#243603). + + -- Aurelien Jarno Wed, 14 Apr 2004 02:40:21 +0200 + +libusb (1:0.1.8-8) unstable; urgency=low + + * Added Dutch debconf translation (closes: bug#242035). Thanks to + Frans Pop. + + -- Aurelien Jarno Mon, 12 Apr 2004 22:03:03 +0200 + +libusb (1:0.1.8-7) unstable; urgency=low + + * Really include Japanese debconf translation. + + -- Aurelien Jarno Thu, 25 Mar 2004 01:17:32 +0100 + +libusb (1:0.1.8-6) unstable; urgency=low + + * Added Japanese debconf translation (closes: bug#239847). Thanks to + Hideki Yamane. + + -- Aurelien Jarno Wed, 24 Mar 2004 23:30:39 +0100 + +libusb (1:0.1.8-5) unstable; urgency=low + + * Added description of the mount options to README.Debian (closes: + bug#237280). + + -- Aurelien Jarno Sun, 21 Mar 2004 01:24:26 +0100 + +libusb (1:0.1.8-4) unstable; urgency=medium + + * Rewrote detection of usbfs (closes: bug#234327, bug#235101). + + -- Aurelien Jarno Sun, 29 Feb 2004 06:06:29 +0100 + +libusb (1:0.1.8-3) unstable; urgency=low + + * Added Danish debconf translation (closes: bug#233759). + * Don't display message about mounting usbfs twice (closes: bug#233820). + * On 2.6 kernels compiled with /sys, propose to mount /sys/bus/usb instead + of /proc/bus/usb (closes: bug#233936). + + -- Aurelien Jarno Fri, 20 Feb 2004 23:25:39 +0100 + +libusb (1:0.1.8-2) unstable; urgency=medium + + * Added French debconf translation (closes: bug#233256). + * Urgency set to medium to not lengthen the migration to testing as + some package such as kdegraphics are waiting for libusb. + + -- Aurelien Jarno Wed, 18 Feb 2004 11:08:14 +0100 + +libusb (1:0.1.8-1) unstable; urgency=low + + * New upstream release. + + -- Aurelien Jarno Wed, 11 Feb 2004 18:09:31 +0100 + +libusb (1:0.1.7-8) unstable; urgency=low + + * Added support for sysfs (2.6 kernels). Thanks to Thom May for the patch + (closes: bug#232208). + * debian/config: check for usbcore.o/usbcore.ko before telling that the + kernel is compiled without usb support (closes: bug#232204). + + -- Aurelien Jarno Wed, 11 Feb 2004 12:59:22 +0100 + +libusb (1:0.1.7-7) unstable; urgency=low + + * Switch to po-debconf. + * Added German debconf translation. Thanks to Michael Ablassmeier. + + -- Aurelien Jarno Mon, 9 Feb 2004 23:52:54 +0100 + +libusb (1:0.1.7-6) unstable; urgency=low + + * Acknowledge previous NMU (closes: bug#217725). + * Fixed a typo in debian/libusb-0.1.4/templates (closes: bug#217742). + + -- Aurelien Jarno Mon, 27 Oct 2003 11:25:18 +0100 + +libusb (1:0.1.7-5.1) unstable; urgency=low + + * NMU. + * Added the remove usb.h fix back. (Closes: #217725) + * Corrected the modified 1:0.1.7-2 changelog entry. + * Various minor fixes. + + -- Christopher L Cheney Mon, 27 Oct 2003 01:00:00 -0600 + +libusb (1:0.1.7-5) unstable; urgency=low + + * If kernel is compiled without USB support, display a message telling + that libusb will not be functionnal instead of displaying the message + 'usbfs not mounted` (closes: bug#217432). + + -- Aurelien Jarno Fri, 24 Oct 2003 22:11:58 +0200 + +libusb (1:0.1.7-4) unstable; urgency=low + + * Changed section of libusb-dev from devel to libdevel to match override. + * Don't display 'usbfs not mounted` twice (closes: bug#217332). + + -- Aurelien Jarno Fri, 24 Oct 2003 05:01:45 +0200 + +libusb (1:0.1.7-3) unstable; urgency=low + + * New maintainer (closes: bug#217117). + * Moved documentation into /usr/share/doc/libusb-dev/html. Register it to + into dhelp database. + * Added manpage for libusb-config + * Warn the user if is not mounted. Thanks to Julien Blache for the patch. + (Closes: bug#185774). + * debian/control + + Depends on ${misc:Depends} + * Uses autotools-dev to update config.{guess,sub}. + * Uses debian/compat instead of DH_COMPAT. + * Upgraded policy compliance to 3.6.1 (no changes). + + -- Aurelien Jarno Thu, 23 Oct 2003 11:29:26 +0200 + +libusb (1:0.1.7-2) unstable; urgency=low + + * Delete autogenerated usb.h file. (Closes: #161193) + * Install libusb documentation. + * GNU config automated update: config.sub (20030509 to 20030509), + config.guess (20030509 to 20030519) + + -- Christopher L Cheney Wed, 4 Jun 2003 01:00:00 -0500 + +libusb (1:0.1.7-1) unstable; urgency=low + + * New upstream release. (Closes: #161193, #171086) + * Added replaces for libusb-dev. (Closes: #144295) + * Recommend hotplug. (Closes: #168340) + * GNU config automated update: config.sub (20010907 to 20030509), + config.guess (20010904 to 20030509) + + -- Christopher L Cheney Thu, 15 May 2003 17:00:00 -0500 + +libusb (1:0.1.6a-2.1) unstable; urgency=low + + * Non-Maintainer Upload without any change, + the powerpc arch needs a rebuild package. + * Fix PowerPC segfault (Closes: #149849, #157772). + + -- christophe barbe Mon, 26 Aug 2002 15:23:35 -0400 + +libusb (1:0.1.6a-2) unstable; urgency=low + + * Added docbook-dsssl to Build Depends. + + -- Christopher L Cheney Mon, 22 Jul 2002 21:00:00 -0500 + +libusb (1:0.1.6a-1) unstable; urgency=low + + * New upstream. (Closes: #152408) + + -- Christopher L Cheney Mon, 22 Jul 2002 18:00:00 -0500 + +libusb (1:0.1.5-4) unstable; urgency=high + + * New upload to fix segfault problems with programs using libusb. I am not + sure what caused the problem. :< + * GNU config automated update: config.sub (20020222 to 20020307), + config.guess (20020219 to 20020320) + + -- Christopher L Cheney Mon, 15 Apr 2002 21:30:00 -0500 + +libusb (1:0.1.5-3) unstable; urgency=high + + * Added Conflicts/Replaces line. (Closes: #137595, #138138) + + -- Christopher L Cheney Fri, 15 Mar 2002 11:30:00 -0600 + +libusb (1:0.1.5-2) unstable; urgency=high + + * fixed package name (Closes: #128914, #133389, #133731) + * GNU config automated update: config.sub (20010907 to 20020222), + config.guess (20010904 to 20020219) + + -- Christopher L Cheney Wed, 27 Feb 2002 19:30:00 -0600 + +libusb (1:0.1.5-1) unstable; urgency=high + + * New Upstream. + * Made rules use a build directory so source directory is clean. + * GNU config automated update: config.sub (20010907 to 20020201), + config.guess (20010904 to 20020130) + + -- Christopher L Cheney Sun, 10 Feb 2002 00:00:00 -0600 + +libusb (1:0.1.4-2) unstable; urgency=high + + * Updated config.guess config.sub (Closes: #120995) + + -- Christopher L Cheney Sun, 25 Nov 2001 00:02:32 -0600 + +libusb (1:0.1.4-1) unstable; urgency=high + + * New Upstream. + + -- Christopher L Cheney Fri, 23 Nov 2001 21:04:13 -0600 + +libusb (1:0.1.3b-2) unstable; urgency=low + + * Ran libtoolize --force -c to fix bug. (Closes: #103355) + + -- Christopher L Cheney Tue, 3 Jul 2001 14:00:00 -0500 + +libusb (1:0.1.3b-1) unstable; urgency=low + + * Initial Release. + + -- Christopher L Cheney Wed, 13 Jun 2001 12:21:44 -0500 + +Local variables: +mode: debian-changelog +End: --- libusb-0.1.12.orig/debian/README.Debian +++ libusb-0.1.12/debian/README.Debian @@ -0,0 +1,31 @@ +libusb for Debian +----------------- + +libusb uses a pseudo-filesystem known as 'usbdevfs` or 'usbfs` to access +the USB devices connected to your machine. This filesystem must be mounted +under /proc/bus/usb for libusb to work. + +It could be done using the following command: + mount -t usbfs none /proc/bus/usb + +An alternative and more permanent method would be to add + none /proc/bus/usb usbfs defaults 0 0 +to your /etc/fstab file. It will mount the usbfs for you automatically at +boot time ; only root will be able to access the USB devices with this +setup. + +You can then issue `cat /proc/bus/usb/devices` to extract USB device +information, and user mode drivers can use usbfs to interact with USB +devices. + +Several mount options are available, that allow you to set the permissions +on the files created under /proc/bus/usb so that non-root users can use +libusb applications: + - devuid=xxx, devgid=xxx, devmode=xxx respectively set the uid, the gid + and the mode of the devices files, ie /proc/bus/usb/BBB/DDD + - busuid=xxx, busgid=xxx, devmode=xxx respectively set the uid, the gid + and the mode of the bus files, ie /proc/bus/usb/BBB + - listuid=xxx, listgid=xxx, listmode=xxx respectively set the uid, the gid + and the mode of /proc/bus/usb/devices + + -- Aurelien Jarno , Sun, 21 Mar 2004 01:01:44 +0100 --- libusb-0.1.12.orig/debian/libusb-config.1 +++ libusb-0.1.12/debian/libusb-config.1 @@ -0,0 +1,41 @@ +.TH LIBUSB-CONFIG 1 "October 23, 2003" +.SH NAME +libusb-config - script to get information about the installed version of libusb +.SH SYNOPSIS +.B libusb-config [\-\-prefix\fI[=DIR]\fP] [\-\-exec\-prefix\fI[=DIR]\fP] [\-\-version] [\-\-libs] [\-\-cflags] [LIBRARIES] +.SH DESCRIPTION +.PP +\fIlibusb-config\fP is a tool that is used to configure to determine +the compiler and linker flags that should be used to compile +and link programs that use \fIlibusb\fP. +. +.SH OPTIONS +\fIlibusb-config\fP accepts the following options: +.TP 8 +.B LIBRARIES +This argument is currently ignored as libusb as only one library. +.TP 8 +.B \-\-version +Print the currently installed version of \fIlibusb\fP on the standard output. +.TP 8 +.B \-\-libs +Print the linker flags that are necessary to link a \fIlibusb\fP program. +.TP 8 +.B \-\-cflags +Print the compiler flags that are necessary to compile a \fIlibusb\fP program. +.TP 8 +.B \-\-prefix=PREFIX +If specified, use PREFIX instead of the installation prefix that \fIlibusb\fP +was built with when computing the output for the \-\-cflags and +\-\-libs options. This option is also used for the exec prefix +if \-\-exec\-prefix was not specified. This option must be specified +before any \-\-libs or \-\-cflags options. +.TP 8 +.B \-\-exec\-prefix=PREFIX +If specified, use PREFIX instead of the installation exec prefix that +\fIlibusb\fP was built with when computing the output for the \-\-cflags +and \-\-libs options. This option must be specified before any +\-\-libs or \-\-cflags options. +.SH AUTHORS +.B libusb +was written by Johannes Erdfelt and Thomas Sailer . --- libusb-0.1.12.orig/debian/libusb++-dev.install +++ libusb-0.1.12/debian/libusb++-dev.install @@ -0,0 +1,4 @@ +usr/include/usbpp.h +usr/lib/libusbpp.a +usr/lib/libusbpp.la +usr/lib/libusbpp.so --- libusb-0.1.12.orig/debian/rules +++ libusb-0.1.12/debian/rules @@ -0,0 +1,203 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# GNU copyright 1997 to 1999 by Joey Hess. +# +# Modified to make a template file for a multi-binary package with separated +# build-arch and build-indep targets by Bill Allombert 2001 + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +# This has to be exported to make some magic below work. +export DH_OPTIONS + +# These are used for cross-compiling and for saving the configure script +# from having to guess our platform (since we know it already) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) +ifneq ($(DEB_HOST_GNU_TYPE),$(DEB_BUILD_GNU_TYPE)) +CROSS= --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE) \ +LDFLAGS="-L/usr/$(DEB_HOST_GNU_TYPE)/lib" +else +CROSS= --build $(DEB_BUILD_GNU_TYPE) +endif + +CFLAGS = -Wall -g +CFLAGS_UDEB = $(CFLAGS) -Os + +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif +ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) + INSTALL_PROGRAM += -s +endif + +objdir = $(CURDIR)/obj-$(DEB_BUILD_GNU_TYPE) +objdir_udeb = $(objdir)-udeb + +configure: configure-deb-stamp configure-udeb-stamp + +configure-common: configure-common-stamp +configure-common-stamp: + dh_testdir + + # apply patches + QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $$? = 2 + + # make sure this file doesn't exist! + rm -f $(CURDIR)/usb.h + + # update config.guess and config.sub + cp -f /usr/share/misc/config.sub config.sub + cp -f /usr/share/misc/config.guess config.guess + + touch $@ + +configure-deb: configure-deb-stamp +configure-deb-stamp: configure-common-stamp + dh_testdir + + # make build directory + mkdir $(objdir) + + # run configure with build tree $(objdir) + cd $(objdir) && \ + CFLAGS="$(CFLAGS)" ../configure $(CROSS) \ + --prefix=/usr \ + --mandir=/usr/share/man \ + --infodir=/usr/share/info + + touch $@ + +configure-udeb: configure-udeb-stamp +configure-udeb-stamp: configure-common-stamp + dh_testdir + + # make build directory + mkdir $(objdir_udeb) + + # run configure with build tree $(objdir_udeb) + cd $(objdir_udeb) && \ + CFLAGS="$(CFLAGS_UDEB)" ../configure $(CROSS) \ + --prefix=/usr \ + --mandir=/usr/share/man \ + --infodir=/usr/share/info \ + --disable-build-docs + + touch $@ + +build: build-arch build-indep +build-arch: build-arch-deb build-arch-udeb + +build-arch-deb: build-arch-deb-stamp +build-arch-deb-stamp: configure-deb-stamp + dh_testdir + + cd $(objdir) && \ + $(MAKE) + + touch $@ + +build-arch-udeb: build-arch-udeb-stamp +build-arch-udeb-stamp: configure-udeb-stamp + dh_testdir + + cd $(objdir_udeb) && \ + $(MAKE) + + touch $@ + +build-indep: build-indep-stamp +build-indep-stamp: + dh_testdir + + touch $@ + +clean: + dh_testdir + dh_testroot + rm -f *-stamp + rm -f config.sub config.guess + + # Remove build trees + rm -rf $(objdir) $(objdir_udeb) + + # Remove patches + QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a || test $$? = 2 + rm -rf .pc + + # Remove install dirs + rm -rf $(CURDIR)/debian/tmp $(CURDIR)/debian/tmp-udeb + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k -s + dh_installdirs -s + + # Main install + cd $(objdir) && \ + $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp + + # Move the library to /lib + mkdir $(CURDIR)/debian/tmp/lib/ + mv $(CURDIR)/debian/tmp/usr/lib/libusb-0.1.so.* \ + $(CURDIR)/debian/tmp/lib/ + ln -sf /lib/libusb-0.1.so.4 $(CURDIR)/debian/tmp/usr/lib/libusb-0.1.so.4 + ln -sf /lib/libusb-0.1.so.4.4.4 $(CURDIR)/debian/tmp/usr/lib/libusb.so + + # Move all files in their corresponding package + dh_install -s -Nlibusb-0.1-udeb --list-missing --sourcedir=debian/tmp + + # udeb install + $(MAKE) -C $(objdir_udeb) install DESTDIR=$(CURDIR)/debian/tmp-udeb + + # Move the library to /lib + mkdir $(CURDIR)/debian/tmp-udeb/lib/ + mv $(CURDIR)/debian/tmp-udeb/usr/lib/libusb-0.1.so.* \ + $(CURDIR)/debian/tmp-udeb/lib/ + + dh_install -plibusb-0.1-udeb --sourcedir=debian/tmp-udeb + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_installchangelogs ChangeLog + dh_installdocs +# dh_installexamples +# dh_installmenu + dh_installdebconf +# dh_installlogrotate +# dh_installemacsen +# dh_installpam +# dh_installmime +# dh_installinit +# dh_installcron +# dh_installinfo + dh_installman + dh_link -s + dh_strip -s + dh_compress -s + dh_fixperms -s +# dh_perl +# dh_python + dh_makeshlibs -V -plibusb-0.1-4 --add-udeb="libusb-0.1-udeb" + dh_makeshlibs -V -plibusb++-0.1-4c2 + dh_installdeb -s + dh_shlibdeps -s + dh_gencontrol -s + dh_md5sums -s + dh_builddeb -s + +binary: binary-arch binary-indep +.PHONY: build clean binary-indep binary-arch binary install configure --- libusb-0.1.12.orig/debian/libusb-dev.manpages +++ libusb-0.1.12/debian/libusb-dev.manpages @@ -0,0 +1 @@ +debian/libusb-config.1 --- libusb-0.1.12.orig/debian/copyright +++ libusb-0.1.12/debian/copyright @@ -0,0 +1,28 @@ +This package was debianized by Christopher L Cheney on +Wed, 13 Jun 2001 12:21:44 -0500. + +It was downloaded from http://prdownloads.sourceforge.net/libusb/ + +Copyright: + Copyright (c) 2000-2003 Johannes Erdfelt + Copyright (c) 2003 Brad Hards + Copyright (c) 2002-2005 Nathan Hjelm + +License: + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the + Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + MA 02110-1301 USA. + +On Debian systems, the complete text of the LGPL license can be found +in the /usr/share/common-licenses/LGPL file. --- libusb-0.1.12.orig/debian/compat +++ libusb-0.1.12/debian/compat @@ -0,0 +1 @@ +5 --- libusb-0.1.12.orig/debian/libusb-0.1-4.install +++ libusb-0.1.12/debian/libusb-0.1-4.install @@ -0,0 +1,2 @@ +/lib/libusb-0.1.so.* +/usr/lib/libusb-0.1.so.* --- libusb-0.1.12.orig/debian/libusb++-0.1-4c2.install +++ libusb-0.1.12/debian/libusb++-0.1-4c2.install @@ -0,0 +1 @@ +usr/lib/libusbpp-0.1.so.* --- libusb-0.1.12.orig/debian/libusb-0.1-udeb.install +++ libusb-0.1.12/debian/libusb-0.1-udeb.install @@ -0,0 +1 @@ +/lib/libusb-0.1.so.* --- libusb-0.1.12.orig/debian/libusb-dev.docs +++ libusb-0.1.12/debian/libusb-dev.docs @@ -0,0 +1 @@ +obj-*/doc/html --- libusb-0.1.12.orig/debian/README.source +++ libusb-0.1.12/debian/README.source @@ -0,0 +1,57 @@ +This package uses quilt to manage all modifications to the upstream +source. Changes are stored in the source package as diffs in +debian/patches and applied during the build. + +To configure quilt to use debian/patches instead of patches, you want +either to export QUILT_PATCHES=debian/patches in your environment +or use this snippet in your ~/.quiltrc: + + for where in ./ ../ ../../ ../../../ ../../../../ ../../../../../; do + if [ -e ${where}debian/rules -a -d ${where}debian/patches ]; then + export QUILT_PATCHES=debian/patches + fi + done + +To get the fully patched source after unpacking the source package, cd to +the root level of the source package and run: + + quilt push -a + +The last patch listed in debian/patches/series will become the current +patch. + +To add a new set of changes, first run quilt push -a, and then run: + + quilt new + +where is a descriptive name for the patch, used as the filename in +debian/patches. Then, for every file that will be modified by this patch, +run: + + quilt add + +before editing those files. You must tell quilt with quilt add what files +will be part of the patch before making changes or quilt will not work +properly. After editing the files, run: + + quilt refresh + +to save the results as a patch. + +Alternately, if you already have an external patch and you just want to +add it to the build system, run quilt push -a and then: + + quilt import -P /path/to/patch + quilt push -a + +(add -p 0 to quilt import if needed). as above is the filename to +use in debian/patches. The last quilt push -a will apply the patch to +make sure it works properly. + +To remove an existing patch from the list of patches that will be applied, +run: + + quilt delete + +You may need to run quilt pop -a to unapply patches first before running +this command. --- libusb-0.1.12.orig/debian/patches/01_ansi.diff +++ libusb-0.1.12/debian/patches/01_ansi.diff @@ -0,0 +1,192 @@ +--- + usb.h.in | 118 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 60 insertions(+), 58 deletions(-) + +--- a/usb.h.in ++++ b/usb.h.in +@@ -13,8 +13,10 @@ + + #include + #include ++#include + #include + ++#include + #include + + /* +@@ -64,40 +66,40 @@ + + /* All standard descriptors have these 2 fields in common */ + struct usb_descriptor_header { +- u_int8_t bLength; +- u_int8_t bDescriptorType; ++ uint8_t bLength; ++ uint8_t bDescriptorType; + } __attribute__ ((packed)); + + /* String descriptor */ + struct usb_string_descriptor { +- u_int8_t bLength; +- u_int8_t bDescriptorType; +- u_int16_t wData[1]; ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint16_t wData[1]; + } __attribute__ ((packed)); + + /* HID descriptor */ + struct usb_hid_descriptor { +- u_int8_t bLength; +- u_int8_t bDescriptorType; +- u_int16_t bcdHID; +- u_int8_t bCountryCode; +- u_int8_t bNumDescriptors; +- /* u_int8_t bReportDescriptorType; */ +- /* u_int16_t wDescriptorLength; */ ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint16_t bcdHID; ++ uint8_t bCountryCode; ++ uint8_t bNumDescriptors; ++ /* uint8_t bReportDescriptorType; */ ++ /* uint16_t wDescriptorLength; */ + /* ... */ + } __attribute__ ((packed)); + + /* Endpoint descriptor */ + #define USB_MAXENDPOINTS 32 + struct usb_endpoint_descriptor { +- u_int8_t bLength; +- u_int8_t bDescriptorType; +- u_int8_t bEndpointAddress; +- u_int8_t bmAttributes; +- u_int16_t wMaxPacketSize; +- u_int8_t bInterval; +- u_int8_t bRefresh; +- u_int8_t bSynchAddress; ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint8_t bEndpointAddress; ++ uint8_t bmAttributes; ++ uint16_t wMaxPacketSize; ++ uint8_t bInterval; ++ uint8_t bRefresh; ++ uint8_t bSynchAddress; + + unsigned char *extra; /* Extra descriptors */ + int extralen; +@@ -115,15 +117,15 @@ + /* Interface descriptor */ + #define USB_MAXINTERFACES 32 + struct usb_interface_descriptor { +- u_int8_t bLength; +- u_int8_t bDescriptorType; +- u_int8_t bInterfaceNumber; +- u_int8_t bAlternateSetting; +- u_int8_t bNumEndpoints; +- u_int8_t bInterfaceClass; +- u_int8_t bInterfaceSubClass; +- u_int8_t bInterfaceProtocol; +- u_int8_t iInterface; ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint8_t bInterfaceNumber; ++ uint8_t bAlternateSetting; ++ uint8_t bNumEndpoints; ++ uint8_t bInterfaceClass; ++ uint8_t bInterfaceSubClass; ++ uint8_t bInterfaceProtocol; ++ uint8_t iInterface; + + struct usb_endpoint_descriptor *endpoint; + +@@ -141,14 +143,14 @@ + /* Configuration descriptor information.. */ + #define USB_MAXCONFIG 8 + struct usb_config_descriptor { +- u_int8_t bLength; +- u_int8_t bDescriptorType; +- u_int16_t wTotalLength; +- u_int8_t bNumInterfaces; +- u_int8_t bConfigurationValue; +- u_int8_t iConfiguration; +- u_int8_t bmAttributes; +- u_int8_t MaxPower; ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint16_t wTotalLength; ++ uint8_t bNumInterfaces; ++ uint8_t bConfigurationValue; ++ uint8_t iConfiguration; ++ uint8_t bmAttributes; ++ uint8_t MaxPower; + + struct usb_interface *interface; + +@@ -158,28 +160,28 @@ + + /* Device descriptor */ + struct usb_device_descriptor { +- u_int8_t bLength; +- u_int8_t bDescriptorType; +- u_int16_t bcdUSB; +- u_int8_t bDeviceClass; +- u_int8_t bDeviceSubClass; +- u_int8_t bDeviceProtocol; +- u_int8_t bMaxPacketSize0; +- u_int16_t idVendor; +- u_int16_t idProduct; +- u_int16_t bcdDevice; +- u_int8_t iManufacturer; +- u_int8_t iProduct; +- u_int8_t iSerialNumber; +- u_int8_t bNumConfigurations; ++ uint8_t bLength; ++ uint8_t bDescriptorType; ++ uint16_t bcdUSB; ++ uint8_t bDeviceClass; ++ uint8_t bDeviceSubClass; ++ uint8_t bDeviceProtocol; ++ uint8_t bMaxPacketSize0; ++ uint16_t idVendor; ++ uint16_t idProduct; ++ uint16_t bcdDevice; ++ uint8_t iManufacturer; ++ uint8_t iProduct; ++ uint8_t iSerialNumber; ++ uint8_t bNumConfigurations; + } __attribute__ ((packed)); + + struct usb_ctrl_setup { +- u_int8_t bRequestType; +- u_int8_t bRequest; +- u_int16_t wValue; +- u_int16_t wIndex; +- u_int16_t wLength; ++ uint8_t bRequestType; ++ uint8_t bRequest; ++ uint16_t wValue; ++ uint16_t wIndex; ++ uint16_t wLength; + } __attribute__ ((packed)); + + /* +@@ -250,7 +252,7 @@ + + void *dev; /* Darwin support */ + +- u_int8_t devnum; ++ uint8_t devnum; + + unsigned char num_children; + struct usb_device **children; +@@ -262,7 +264,7 @@ + char dirname[PATH_MAX + 1]; + + struct usb_device *devices; +- u_int32_t location; ++ uint32_t location; + + struct usb_device *root_dev; + }; --- libusb-0.1.12.orig/debian/patches/06_bsd.diff +++ libusb-0.1.12/debian/patches/06_bsd.diff @@ -0,0 +1,11 @@ +--- a/bsd.c ++++ b/bsd.c +@@ -39,7 +39,7 @@ + #include + #include + +-#include ++#include + + #include "usbi.h" + #ifdef HAVE_CONFIG_H --- libusb-0.1.12.orig/debian/patches/00_packed.diff +++ libusb-0.1.12/debian/patches/00_packed.diff @@ -0,0 +1,50 @@ +--- + usb.h.in | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +--- a/usb.h.in ++++ b/usb.h.in +@@ -66,14 +66,14 @@ + struct usb_descriptor_header { + u_int8_t bLength; + u_int8_t bDescriptorType; +-}; ++} __attribute__ ((packed)); + + /* String descriptor */ + struct usb_string_descriptor { + u_int8_t bLength; + u_int8_t bDescriptorType; + u_int16_t wData[1]; +-}; ++} __attribute__ ((packed)); + + /* HID descriptor */ + struct usb_hid_descriptor { +@@ -85,7 +85,7 @@ + /* u_int8_t bReportDescriptorType; */ + /* u_int16_t wDescriptorLength; */ + /* ... */ +-}; ++} __attribute__ ((packed)); + + /* Endpoint descriptor */ + #define USB_MAXENDPOINTS 32 +@@ -172,7 +172,7 @@ + u_int8_t iProduct; + u_int8_t iSerialNumber; + u_int8_t bNumConfigurations; +-}; ++} __attribute__ ((packed)); + + struct usb_ctrl_setup { + u_int8_t bRequestType; +@@ -180,7 +180,7 @@ + u_int16_t wValue; + u_int16_t wIndex; + u_int16_t wLength; +-}; ++} __attribute__ ((packed)); + + /* + * Standard requests --- libusb-0.1.12.orig/debian/patches/03_const_buffers.diff +++ libusb-0.1.12/debian/patches/03_const_buffers.diff @@ -0,0 +1,102 @@ +--- + bsd.c | 4 ++-- + darwin.c | 6 +++--- + linux.c | 8 ++++---- + usb.h.in | 4 ++-- + 4 files changed, 11 insertions(+), 11 deletions(-) + +--- a/bsd.c ++++ b/bsd.c +@@ -279,7 +279,7 @@ + return info->ep_fd[ep]; + } + +-int usb_bulk_write(usb_dev_handle *dev, int ep, char *bytes, int size, ++int usb_bulk_write(usb_dev_handle *dev, int ep, const char *bytes, int size, + int timeout) + { + int fd, ret; +@@ -358,7 +358,7 @@ + return ret; + } + +-int usb_interrupt_write(usb_dev_handle *dev, int ep, char *bytes, int size, ++int usb_interrupt_write(usb_dev_handle *dev, int ep, const char *bytes, int size, + int timeout) + { + int fd, ret, sent = 0; +--- a/linux.c ++++ b/linux.c +@@ -277,11 +277,11 @@ + return bytesdone; + } + +-int usb_bulk_write(usb_dev_handle *dev, int ep, char *bytes, int size, ++int usb_bulk_write(usb_dev_handle *dev, int ep, const char *bytes, int size, + int timeout) + { + /* Ensure the endpoint address is correct */ +- return usb_urb_transfer(dev, ep, USB_URB_TYPE_BULK, bytes, size, ++ return usb_urb_transfer(dev, ep, USB_URB_TYPE_BULK, (char *)bytes, size, + timeout); + } + +@@ -299,11 +299,11 @@ + * 2.5 HCDs yet) don't handle multi-packet Interrupt transfers. So we need + * to lookup the endpoint packet size and packetize appropriately here. + */ +-int usb_interrupt_write(usb_dev_handle *dev, int ep, char *bytes, int size, ++int usb_interrupt_write(usb_dev_handle *dev, int ep, const char *bytes, int size, + int timeout) + { + /* Ensure the endpoint address is correct */ +- return usb_urb_transfer(dev, ep, USB_URB_TYPE_INTERRUPT, bytes, size, ++ return usb_urb_transfer(dev, ep, USB_URB_TYPE_INTERRUPT, (char *)bytes, size, + timeout); + } + +--- a/darwin.c ++++ b/darwin.c +@@ -871,7 +871,7 @@ + return rw_arg.io_size; + } + +-int usb_bulk_write(usb_dev_handle *dev, int ep, char *bytes, int size, int timeout) ++int usb_bulk_write(usb_dev_handle *dev, int ep, const char *bytes, int size, int timeout) + { + int result; + rw_async_to_func_t to_func = NULL; +@@ -886,7 +886,7 @@ + to_func = (*(device->interface))->WritePipeAsyncTO; + #endif + +- if ((result = usb_bulk_transfer (dev, ep, bytes, size, timeout, ++ if ((result = usb_bulk_transfer (dev, ep, (char *) bytes, size, timeout, + (*(device->interface))->WritePipeAsync, to_func)) < 0) + USB_ERROR_STR (result, "usb_bulk_write: An error occured during write (see messages above)"); + +@@ -918,7 +918,7 @@ + } + + /* interrupt endpoints seem to be treated just like any other endpoint under OSX/Darwin */ +-int usb_interrupt_write(usb_dev_handle *dev, int ep, char *bytes, int size, ++int usb_interrupt_write(usb_dev_handle *dev, int ep, const char *bytes, int size, + int timeout) + { + return usb_bulk_write (dev, ep, bytes, size, timeout); +--- a/usb.h.in ++++ b/usb.h.in +@@ -296,11 +296,11 @@ + unsigned char index, void *buf, int size); + + /* .c */ +-int usb_bulk_write(usb_dev_handle *dev, int ep, char *bytes, int size, ++int usb_bulk_write(usb_dev_handle *dev, int ep, const char *bytes, int size, + int timeout); + int usb_bulk_read(usb_dev_handle *dev, int ep, char *bytes, int size, + int timeout); +-int usb_interrupt_write(usb_dev_handle *dev, int ep, char *bytes, int size, ++int usb_interrupt_write(usb_dev_handle *dev, int ep, const char *bytes, int size, + int timeout); + int usb_interrupt_read(usb_dev_handle *dev, int ep, char *bytes, int size, + int timeout); --- libusb-0.1.12.orig/debian/patches/90_am_maintainer_mode.diff +++ libusb-0.1.12/debian/patches/90_am_maintainer_mode.diff @@ -0,0 +1,14 @@ +--- + configure.in | 1 + + 1 file changed, 1 insertion(+) + +--- a/configure.in ++++ b/configure.in +@@ -29,6 +29,7 @@ + cflags_set=${CFLAGS+set} + + AM_INIT_AUTOMAKE([gnu nostdinc subdir-objects 1.7.6 --warnings=all]) ++AM_MAINTAINER_MODE + + LIBUSB_VERSION=$VERSION + --- libusb-0.1.12.orig/debian/patches/05_emdebian_libs.diff +++ libusb-0.1.12/debian/patches/05_emdebian_libs.diff @@ -0,0 +1,43 @@ +05_emdebian_libs.diff by Neil Williams + +Add libusb.la to each build so that cross builds find the correct symbols. + +--- + tests/Makefile.am | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +--- a/tests/Makefile.am ++++ b/tests/Makefile.am +@@ -11,25 +11,25 @@ + testlibusb_LDADD = $(top_builddir)/libusb.la @OSLIBS@ + + descriptor_test_SOURCES = descriptor_test.cpp +-descriptor_test_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++descriptor_test_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + + id_test_SOURCES = id_test.cpp +-id_test_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++id_test_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + + find_hubs_SOURCES = find_hubs.cpp +-find_hubs_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++find_hubs_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + + find_mice_SOURCES = find_mice.cpp +-find_mice_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++find_mice_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + + get_resolution_SOURCES = get_resolution.cpp +-get_resolution_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++get_resolution_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + + hub_strings_SOURCES = hub_strings.cpp +-hub_strings_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++hub_strings_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + + driver_name_SOURCES = driver_name.cpp +-driver_name_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++driver_name_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + + TESTS = testlibusb descriptor_test id_test find_hubs find_mice \ + get_resolution hub_strings $(OS_SPECIFIC) --- libusb-0.1.12.orig/debian/patches/07_altsetting_alloc.diff +++ libusb-0.1.12/debian/patches/07_altsetting_alloc.diff @@ -0,0 +1,33 @@ +--- a/descriptors.c ++++ b/descriptors.c +@@ -177,6 +177,7 @@ + } + + ifp = interface->altsetting + interface->num_altsetting; ++ memset(ifp, 0, sizeof(struct usb_interface_descriptor)); + interface->num_altsetting++; + + usb_parse_descriptor(buffer, "bbbbbbbbb", ifp); +@@ -219,10 +220,7 @@ + /* Copy any unknown descriptors into a storage area for */ + /* drivers to later parse */ + len = (int)(buffer - begin); +- if (!len) { +- ifp->extra = NULL; +- ifp->extralen = 0; +- } else { ++ if (len) { + ifp->extra = malloc(len); + if (!ifp->extra) { + if (usb_debug >= 1) +@@ -277,8 +275,7 @@ + parsed += retval; + size -= retval; + } +- } else +- ifp->endpoint = NULL; ++ } + + /* We check to see if it's an alternate to this one */ + ifp = (struct usb_interface_descriptor *)buffer; + --- libusb-0.1.12.orig/debian/patches/91_autoreconf.diff +++ libusb-0.1.12/debian/patches/91_autoreconf.diff @@ -0,0 +1,33458 @@ +--- + Makefile.in | 378 - + aclocal.m4 | 2873 ++++++--- + config.guess | 1526 +++++ + config.sub | 1658 +++++ + configure |15852 ++++++++++++++++++++++++++++-------------------------- + doc/Makefile.in | 114 + ltmain.sh | 1503 +++-- + tests/Makefile.in | 288 + 8 files changed, 14650 insertions(+), 9542 deletions(-) + +--- a/aclocal.m4 ++++ b/aclocal.m4 +@@ -1,7 +1,7 @@ +-# generated automatically by aclocal 1.8.3 -*- Autoconf -*- ++# generated automatically by aclocal 1.10.1 -*- Autoconf -*- + +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 +-# Free Software Foundation, Inc. ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ++# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -11,9 +11,17 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++m4_if(AC_AUTOCONF_VERSION, [2.61],, ++[m4_warning([this file was generated for autoconf 2.61. ++You have another version of autoconf. It may work, but is not guaranteed to. ++If you have problems, you may need to regenerate the build system entirely. ++To do so, use the procedure documented by the package, typically `autoreconf'.])]) ++ + # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- + +-# serial 47 AC_PROG_LIBTOOL ++# serial 52 Debian 1.5.26-4 AC_PROG_LIBTOOL + + + # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +@@ -101,7 +109,6 @@ + AC_REQUIRE([AC_OBJEXT])dnl + AC_REQUIRE([AC_EXEEXT])dnl + dnl +- + AC_LIBTOOL_SYS_MAX_CMD_LEN + AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + AC_LIBTOOL_OBJDIR +@@ -123,7 +130,7 @@ + + # Sed substitution that helps us do robust quoting. It backslashifies + # metacharacters that are still active within double-quoted strings. +-Xsed='sed -e s/^X//' ++Xsed='sed -e 1s/^X//' + [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + + # Same as above, but do not quote variable references. +@@ -143,7 +150,7 @@ + default_ofile=libtool + can_build_shared=yes + +-# All known linkers require a `.a' archive for static linking (except M$VC, ++# All known linkers require a `.a' archive for static linking (except MSVC, + # which needs '.lib'). + libext=a + ltmain="$ac_aux_dir/ltmain.sh" +@@ -163,6 +170,7 @@ + test -z "$AS" && AS=as + test -z "$CC" && CC=cc + test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS + test -z "$DLLTOOL" && DLLTOOL=dlltool + test -z "$LD" && LD=ld + test -z "$LN_S" && LN_S="ln -s" +@@ -175,22 +183,24 @@ + test -z "$ac_objext" && ac_objext=o + + # Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' + old_postinstall_cmds='chmod 644 $oldlib' + old_postuninstall_cmds= + + if test -n "$RANLIB"; then + case $host_os in + openbsd*) +- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) +- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + fi + ++_LT_CC_BASENAME([$compiler]) ++ + # Only perform the check for file, if the check method requires it + case $deplibs_check_method in + file_magic*) +@@ -200,6 +210,8 @@ + ;; + esac + ++_LT_REQUIRED_DARWIN_CHECKS ++ + AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) + AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], + enable_win32_dll=yes, enable_win32_dll=no) +@@ -231,11 +243,129 @@ + # If no C compiler was specified, use CC. + LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ + # Allow CC to be a program name with arguments. + compiler=$CC + ])# _LT_AC_SYS_COMPILER + + ++# _LT_CC_BASENAME(CC) ++# ------------------- ++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. ++AC_DEFUN([_LT_CC_BASENAME], ++[for cc_temp in $1""; do ++ case $cc_temp in ++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; ++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++]) ++ ++ ++# _LT_COMPILER_BOILERPLATE ++# ------------------------ ++# Check for compiler boilerplate output or warnings with ++# the simple compiler test code. ++AC_DEFUN([_LT_COMPILER_BOILERPLATE], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++])# _LT_COMPILER_BOILERPLATE ++ ++ ++# _LT_LINKER_BOILERPLATE ++# ---------------------- ++# Check for linker boilerplate output or warnings with ++# the simple link test code. ++AC_DEFUN([_LT_LINKER_BOILERPLATE], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm -r conftest* ++])# _LT_LINKER_BOILERPLATE ++ ++# _LT_REQUIRED_DARWIN_CHECKS ++# -------------------------- ++# Check for some things on darwin ++AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ ++ case $host_os in ++ rhapsody* | darwin*) ++ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) ++ AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) ++ ++ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], ++ [lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ echo "int foo(void){return 1;}" > conftest.c ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib ${wl}-single_module conftest.c ++ if test -f libconftest.dylib; then ++ lt_cv_apple_cc_single_mod=yes ++ rm -rf libconftest.dylib* ++ fi ++ rm conftest.c ++ fi]) ++ AC_CACHE_CHECK([for -exported_symbols_list linker flag], ++ [lt_cv_ld_exported_symbols_list], ++ [lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [lt_cv_ld_exported_symbols_list=yes], ++ [lt_cv_ld_exported_symbols_list=no]) ++ LDFLAGS="$save_LDFLAGS" ++ ]) ++ case $host_os in ++ rhapsody* | darwin1.[[0123]]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[[012]]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ esac ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil="~$DSYMUTIL \$lib || :" ++ else ++ _lt_dsymutil= ++ fi ++ ;; ++ esac ++]) ++ + # _LT_AC_SYS_LIBPATH_AIX + # ---------------------- + # Links a minimal program and checks the executable +@@ -245,12 +375,20 @@ + # If we don't find anything, use the default library path according + # to the aix ld manual. + AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'` ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_LINK_IFELSE(AC_LANG_PROGRAM,[ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'`; fi],[]) ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi],[]) + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + ])# _LT_AC_SYS_LIBPATH_AIX + +@@ -308,15 +446,15 @@ + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. +-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + if test -z "$ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string="`eval $cmd`") 2>/dev/null && +- echo_test_string="`eval $cmd`" && ++ if (echo_test_string=`eval $cmd`) 2>/dev/null && ++ echo_test_string=`eval $cmd` && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break +@@ -481,13 +619,17 @@ + rm -rf conftest* + ;; + +-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then +- case "`/usr/bin/file conftest.o`" in ++ case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; +@@ -504,6 +646,9 @@ + ;; + *64-bit*) + case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; +@@ -536,6 +681,26 @@ + CFLAGS="$SAVE_CFLAGS" + fi + ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ + AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], + [*-*-cygwin* | *-*-mingw* | *-*-pw32*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) +@@ -559,7 +724,7 @@ + AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. +@@ -567,7 +732,7 @@ + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +@@ -577,8 +742,10 @@ + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi +@@ -598,22 +765,28 @@ + # ------------------------------------------------------------ + # Check whether the given compiler option works + AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +-[AC_CACHE_CHECK([$1], [$2], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" +- printf "$lt_simple_link_test_code" > conftest.$ac_ext ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The compiler can only warn and ignore the option if not recognized ++ # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi + else + $2=yes + fi + fi +- $rm conftest* ++ $rm -r conftest* + LDFLAGS="$save_LDFLAGS" + ]) + +@@ -667,24 +840,71 @@ + lt_cv_sys_max_cmd_len=8192; + ;; + +- *) +- # If test is not a shell built-in, we'll probably end up computing a +- # maximum length that is only half of the actual maximum length, but +- # we can't tell. +- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && +- new_result=`expr "X$teststring" : ".*" 2>&1` && +- lt_cv_sys_max_cmd_len=$new_result && +- test $i != 17 # 1/2 MB should be enough +- do +- i=`expr $i + 1` +- teststring=$teststring$teststring +- done +- teststring= +- # Add a significant safety factor because C++ compilers can tack on massive +- # amounts of additional arguments before passing them to the linker. +- # It appears as though 1/2 is a usable value. +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ new_result=`expr "X$teststring" : ".*" 2>&1` && ++ lt_cv_sys_max_cmd_len=$new_result && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on massive ++ # amounts of additional arguments before passing them to the linker. ++ # It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi + ;; + esac + ]) +@@ -697,7 +917,7 @@ + + + # _LT_AC_CHECK_DLFCN +-# -------------------- ++# ------------------ + AC_DEFUN([_LT_AC_CHECK_DLFCN], + [AC_CHECK_HEADERS(dlfcn.h)dnl + ])# _LT_AC_CHECK_DLFCN +@@ -705,7 +925,7 @@ + + # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, + # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +-# ------------------------------------------------------------------ ++# --------------------------------------------------------------------- + AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], + [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + if test "$cross_compiling" = yes; then : +@@ -771,17 +991,19 @@ + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } ++ else ++ puts (dlerror ()); + + exit (status); + }] + EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null ++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; +- x$lt_unknown|x*) $3 ;; ++ x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed +@@ -793,7 +1015,7 @@ + + + # AC_LIBTOOL_DLOPEN_SELF +-# ------------------- ++# ---------------------- + AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], + [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + if test "x$enable_dlopen" != xyes; then +@@ -835,7 +1057,7 @@ + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], +- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], ++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], +@@ -843,7 +1065,7 @@ + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], +- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) ++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) +@@ -864,7 +1086,7 @@ + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" +@@ -877,7 +1099,7 @@ + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( +@@ -909,7 +1131,8 @@ + # --------------------------------- + # Check to see if options -c and -o are simultaneously supported by compiler + AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no +@@ -917,7 +1140,7 @@ + mkdir conftest + cd conftest + mkdir out +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or +@@ -925,7 +1148,7 @@ + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +@@ -937,11 +1160,13 @@ + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings +- if test ! -s out/conftest.err; then ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi +- chmod u+w . ++ chmod u+w . 2>&AS_MESSAGE_LOG_FD + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation +@@ -1005,8 +1230,8 @@ + [AC_MSG_CHECKING([how to hardcode library paths into programs]) + _LT_AC_TAGVAR(hardcode_action, $1)= + if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ +- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ +- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then ++ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ ++ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && +@@ -1055,6 +1280,7 @@ + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" ++ old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) +@@ -1072,7 +1298,8 @@ + # ----------------------------- + # PORTME Fill in your ld.so characteristics + AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +-[AC_MSG_CHECKING([dynamic linker characteristics]) ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_MSG_CHECKING([dynamic linker characteristics]) + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -1086,20 +1313,58 @@ + version_type=none + dynamic_linker="$host_os ld.so" + sys_lib_dlsearch_path_spec="/lib /usr/lib" ++m4_if($1,[],[ + if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[[lt_foo]]++; } ++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`echo $lt_search_path_spec` + else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +-fi ++fi]) + need_lib_prefix=unknown + hardcode_into_libs=no + +@@ -1117,7 +1382,7 @@ + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +-aix4* | aix5*) ++aix[[4-9]]*) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -1173,7 +1438,7 @@ + shlibpath_var=LIBRARY_PATH + ;; + +-bsdi4*) ++bsdi[[45]]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -1201,7 +1466,8 @@ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname' ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' +@@ -1231,7 +1497,7 @@ + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; +@@ -1254,13 +1520,9 @@ + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' +- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. +- if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` +- else +- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' +- fi ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ m4_if([$1], [],[ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +@@ -1277,20 +1539,17 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[[123]]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) +@@ -1308,14 +1567,19 @@ + freebsd2*) + shlibpath_overrides_runpath=yes + ;; +- freebsd3.[01]* | freebsdelf3.[01]*) ++ freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; +- *) # from 3.2 on ++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ ++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + esac + ;; + +@@ -1335,7 +1599,7 @@ + version_type=sunos + need_lib_prefix=no + need_version=no +- case "$host_cpu" in ++ case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes +@@ -1375,6 +1639,18 @@ + postinstall_cmds='chmod 555 $lib' + ;; + ++interix[[3-9]]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ + irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; +@@ -1418,7 +1694,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -1432,27 +1708,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '[#]line __oline__ "configure"' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -1464,7 +1723,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -1473,7 +1732,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -1513,8 +1772,13 @@ + + openbsd*) + version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no +- need_version=yes ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH +@@ -1552,11 +1816,8 @@ + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH ++rdos*) ++ dynamic_linker=no + ;; + + solaris*) +@@ -1584,7 +1845,7 @@ + need_version=yes + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' +@@ -1617,6 +1878,29 @@ + fi + ;; + ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ + uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -1630,13 +1914,26 @@ + esac + AC_MSG_RESULT([$dynamic_linker]) + test "$dynamic_linker" = no && can_build_shared=no ++ ++AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec], ++[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"]) ++sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec], ++[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"]) ++sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi + ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + + # _LT_AC_TAGCONFIG + # ---------------- + AC_DEFUN([_LT_AC_TAGCONFIG], +-[AC_ARG_WITH([tags], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], + [include additional configurations @<:@automatic@:>@])], + [tagnames="$withval"]) +@@ -1654,6 +1951,9 @@ + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi ++ if test -z "$LTCFLAGS"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" ++ fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. +@@ -1680,7 +1980,9 @@ + + case $tagname in + CXX) +- if test -n "$CXX" && test "X$CXX" != "Xno"; then ++ if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" +@@ -1742,7 +2044,7 @@ + + # AC_LIBTOOL_WIN32_DLL + # -------------------- +-# declare package support for building win32 dll's ++# declare package support for building win32 DLLs + AC_DEFUN([AC_LIBTOOL_WIN32_DLL], + [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) + ])# AC_LIBTOOL_WIN32_DLL +@@ -1780,7 +2082,7 @@ + + # AC_DISABLE_SHARED + # ----------------- +-#- set the default shared flag to --disable-shared ++# set the default shared flag to --disable-shared + AC_DEFUN([AC_DISABLE_SHARED], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_ENABLE_SHARED(no) +@@ -1892,7 +2194,7 @@ + + # AC_PATH_TOOL_PREFIX + # ------------------- +-# find a file program which can recognise shared library ++# find a file program which can recognize shared library + AC_DEFUN([AC_PATH_TOOL_PREFIX], + [AC_REQUIRE([AC_PROG_EGREP])dnl + AC_MSG_CHECKING([for $1]) +@@ -1916,7 +2218,7 @@ + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then +@@ -1955,7 +2257,7 @@ + + # AC_PATH_MAGIC + # ------------- +-# find a file program which can recognise a shared library ++# find a file program which can recognize a shared library + AC_DEFUN([AC_PATH_MAGIC], + [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) + if test -z "$lt_cv_path_MAGIC_CMD"; then +@@ -2026,7 +2328,7 @@ + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some GNU ld's only accept -v. ++ # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi + ;; + + darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +-freebsd* | kfreebsd*-gnu) ++freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; +@@ -2163,7 +2480,7 @@ + + hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file +- case "$host_cpu" in ++ case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so +@@ -2179,6 +2496,11 @@ + esac + ;; + ++interix[[3-9]]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ++ ;; ++ + irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; +@@ -2190,20 +2512,11 @@ + ;; + + # This must be Linux ELF. +-linux*) +- case $host_cpu in +- alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*) +- lt_cv_deplibs_check_method=pass_all ;; +- *) +- # glibc up to 2.1.1 does not perform some relocations on ARM +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; +- esac +- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ++linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) ++netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else +@@ -2222,12 +2535,10 @@ + ;; + + openbsd*) +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else +- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +@@ -2235,7 +2546,7 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-sco3.2v5*) ++rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +@@ -2243,7 +2554,7 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' +@@ -2264,10 +2575,13 @@ + siemens) + lt_cv_deplibs_check_method=pass_all + ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + esac + ;; + +-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + esac +@@ -2287,36 +2601,43 @@ + # Let the user override the test. + lt_cv_path_NM="$NM" + else +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- tmp_nm="$ac_dir/${ac_tool_prefix}nm" +- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in +- */dev/null* | *'Invalid file or object type'*) +- lt_cv_path_NM="$tmp_nm -B" +- break +- ;; +- *) +- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in +- */dev/null*) +- lt_cv_path_NM="$tmp_nm -p" ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac + ;; + esac +- esac +- fi ++ fi ++ done ++ IFS="$lt_save_ifs" + done +- IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + fi]) + NM="$lt_cv_path_NM" +@@ -2348,13 +2669,13 @@ + # ----------------------------------- + # sets LIBLTDL to the link flags for the libltdl convenience library and + # LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL +-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +-# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will +-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with +-# '${top_srcdir}/' (note the single quotes!). If your package is not +-# flat and you're not using automake, define top_builddir and +-# top_srcdir appropriately in the Makefiles. ++# --enable-ltdl-convenience to the configure arguments. Note that ++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, ++# it is assumed to be `libltdl'. LIBLTDL will be prefixed with ++# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' ++# (note the single quotes!). If your package is not flat and you're not ++# using automake, define top_builddir and top_srcdir appropriately in ++# the Makefiles. + AC_DEFUN([AC_LIBLTDL_CONVENIENCE], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in +@@ -2373,13 +2694,13 @@ + # ----------------------------------- + # sets LIBLTDL to the link flags for the libltdl installable library and + # LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-install to the configure arguments. Note that LIBLTDL +-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +-# DIRECTORY is not provided and an installed libltdl is not found, it is +-# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' +-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single +-# quotes!). If your package is not flat and you're not using automake, +-# define top_builddir and top_srcdir appropriately in the Makefiles. ++# --enable-ltdl-install to the configure arguments. Note that ++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, ++# and an installed libltdl is not found, it is assumed to be `libltdl'. ++# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with ++# '${top_srcdir}/' (note the single quotes!). If your package is not ++# flat and you're not using automake, define top_builddir and top_srcdir ++# appropriately in the Makefiles. + # In the future, this macro may have to be called after AC_PROG_LIBTOOL. + AC_DEFUN([AC_LIBLTDL_INSTALLABLE], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +@@ -2417,10 +2738,21 @@ + # --------------- + AC_DEFUN([_LT_AC_LANG_CXX], + [AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([AC_PROG_CXXCPP]) ++AC_REQUIRE([_LT_AC_PROG_CXXCPP]) + _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) + ])# _LT_AC_LANG_CXX + ++# _LT_AC_PROG_CXXCPP ++# ------------------ ++AC_DEFUN([_LT_AC_PROG_CXXCPP], ++[ ++AC_REQUIRE([AC_PROG_CXX]) ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_PROG_CXXCPP ++fi ++])# _LT_AC_PROG_CXXCPP + + # AC_LIBTOOL_F77 + # -------------- +@@ -2460,7 +2792,7 @@ + + + # AC_LIBTOOL_RC +-# -------------- ++# ------------- + # enable support for Windows resource files + AC_DEFUN([AC_LIBTOOL_RC], + [AC_REQUIRE([LT_AC_PROG_RC]) +@@ -2486,43 +2818,16 @@ + _LT_AC_TAGVAR(objext, $1)=$objext + + # Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;\n" ++lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests +-lt_simple_link_test_code='int main(){return(0);}\n' ++lt_simple_link_test_code='int main(){return(0);}' + + _LT_AC_SYS_COMPILER + +-# +-# Check for any special shared library compilation flags. +-# +-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +-if test "$GCC" = no; then +- case $host_os in +- sco3.2v5*) +- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' +- ;; +- esac +-fi +-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then +- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) +- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : +- else +- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) +- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no +- fi +-fi +- +- +-# +-# Check to make sure the static flag actually works. +-# +-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], +- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), +- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), +- [], +- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) +- ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE + + AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) + AC_LIBTOOL_PROG_COMPILER_PIC($1) +@@ -2532,9 +2837,9 @@ + AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) + AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) + AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF($1) ++AC_LIBTOOL_DLOPEN_SELF + +-# Report which librarie types wil actually be built ++# Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + +@@ -2543,7 +2848,7 @@ + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. +-case "$host_os" in ++case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then +@@ -2552,47 +2857,10 @@ + fi + ;; + +-aix4* | aix5*) ++aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi +- ;; +- darwin* | rhapsody*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case "$host_os" in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' +- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) +@@ -2618,7 +2886,7 @@ + AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], + [AC_LANG_PUSH(C++) + AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([AC_PROG_CXXCPP]) ++AC_REQUIRE([_LT_AC_PROG_CXXCPP]) + + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(allow_undefined_flag, $1)= +@@ -2630,6 +2898,7 @@ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no ++_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= +@@ -2645,23 +2914,28 @@ + _LT_AC_TAGVAR(predeps, $1)= + _LT_AC_TAGVAR(postdeps, $1)= + _LT_AC_TAGVAR(compiler_lib_search_path, $1)= ++_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)= + + # Source file extension for C++ test sources. +-ac_ext=cc ++ac_ext=cpp + + # Object file extension for compiled C++ test sources. + objext=o + _LT_AC_TAGVAR(objext, $1)=$objext + + # Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;\n" ++lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests +-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' ++lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_AC_SYS_COMPILER + ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_LD=$LD +@@ -2672,18 +2946,18 @@ + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else +- unset lt_cv_prog_gnu_ld ++ $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else +- unset lt_cv_path_LD ++ $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + compiler=$CC + _LT_AC_TAGVAR(compiler, $1)=$CC +-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` ++_LT_CC_BASENAME([$compiler]) + + # We don't want -fno-exception wen compiling C++ code, so set the + # no_builtin_flag separately +@@ -2750,7 +3024,7 @@ + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- aix4* | aix5*) ++ aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. +@@ -2763,7 +3037,7 @@ + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. +- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) +@@ -2772,6 +3046,7 @@ + ;; + esac + done ++ ;; + esac + + exp_sym_flag='-bexport' +@@ -2790,7 +3065,7 @@ + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` +@@ -2798,7 +3073,7 @@ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ : + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +@@ -2809,8 +3084,12 @@ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi ++ ;; + esac + shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi + else + # not using gcc + if test "$host_cpu" = ia64; then +@@ -2837,12 +3116,12 @@ + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX +@@ -2851,16 +3130,26 @@ + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ + chorus*) + case $cc_basename in + *) +@@ -2879,7 +3168,7 @@ + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +@@ -2888,70 +3177,53 @@ + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; +- +- darwin* | rhapsody*) +- if test "$GXX" = yes; then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case "$host_os" in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' ++ darwin* | rhapsody*) ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" ++ if test "$GXX" = yes ; then ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ if test "$lt_cv_apple_cc_single_mod" != "yes"; then ++ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" ++ fi + else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' +- ;; +- esac ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac + fi +- ;; +- esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++ ;; + + dgux*) + case $cc_basename in +- ec++) ++ ec++*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- ghcx) ++ ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no +@@ -2962,14 +3234,14 @@ + ;; + esac + ;; +- freebsd[12]*) ++ freebsd[[12]]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes +@@ -2986,11 +3258,11 @@ + # location of the library. + + case $cc_basename in +- CC) ++ CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- aCC) ++ aCC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when +@@ -3000,7 +3272,7 @@ + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then +@@ -3014,33 +3286,20 @@ + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then +- case "$host_cpu" in +- hppa*64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; +- ia64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- ;; ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ;; + *) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi +- case "$host_cpu" in +- hppa*64*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- ia64*) ++ case $host_cpu in ++ hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes +@@ -3051,14 +3310,17 @@ + esac + + case $cc_basename in +- CC) ++ CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- aCC) +- case "$host_cpu" in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +@@ -3077,9 +3339,12 @@ + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then +- case "$host_cpu" in +- ia64*|hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +@@ -3093,11 +3358,25 @@ + ;; + esac + ;; ++ interix[[3-9]]*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; + irix5* | irix6*) + case $cc_basename in +- CC) ++ CC*) + # SGI C++ +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is +@@ -3108,7 +3387,7 @@ + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi +@@ -3119,9 +3398,9 @@ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in +- KCC) ++ KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file +@@ -3146,17 +3425,41 @@ + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; +- icpc) ++ icpc*) + # Intel C++ + with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; +- cxx) ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' +@@ -3175,6 +3478,29 @@ + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ ++ # Not sure whether something based on ++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 ++ # would be better. ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ esac ++ ;; + esac + ;; + lynxos*) +@@ -3187,7 +3513,7 @@ + ;; + mvs*) + case $cc_basename in +- cxx) ++ cxx*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +@@ -3197,7 +3523,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= +@@ -3208,9 +3534,29 @@ + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd='echo' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + osf3*) + case $cc_basename in +- KCC) ++ KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file +@@ -3226,14 +3572,14 @@ + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + + ;; +- RCC) ++ RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- cxx) ++ cxx*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +@@ -3251,7 +3597,7 @@ + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +@@ -3270,7 +3616,7 @@ + ;; + osf4* | osf5*) + case $cc_basename in +- KCC) ++ KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file +@@ -3285,17 +3631,17 @@ + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; +- RCC) ++ RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- cxx) ++ cxx*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ +- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +@@ -3314,7 +3660,7 @@ + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +@@ -3335,27 +3681,14 @@ + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- sco*) +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case $cc_basename in +- CC) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; + sunos4*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- lcc) ++ lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no +@@ -3368,36 +3701,28 @@ + ;; + solaris*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) +- # The C++ compiler is used as linker so we must use $wl +- # flag to pass the commands to the underlying system +- # linker. ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ output_verbose_link_cmd='echo' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is +@@ -3405,7 +3730,7 @@ + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; +- gcx) ++ gcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + +@@ -3439,16 +3764,73 @@ + fi + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ ;; ++ esac + fi + ;; + esac + ;; +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ # So that behaviour is only enabled if SCOABSPATH is set to a ++ # non-empty value in the environment. Most likely only useful for ++ # creating official distributions of packages. ++ # This is a hack until libtool officially supports absolute path ++ # names for shared libraries. ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac + ;; + tandem*) + case $cc_basename in +- NCC) ++ NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no +@@ -3481,8 +3863,6 @@ + AC_LIBTOOL_PROG_LD_SHLIBS($1) + AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) + AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF($1) + + AC_LIBTOOL_CONFIG($1) + +@@ -3500,12 +3880,13 @@ + ])# AC_LIBTOOL_LANG_CXX_CONFIG + + # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +-# ------------------------ ++# ------------------------------------ + # Figure out "hidden" library dependencies from verbose + # compiler output when linking a shared library. + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. +-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ ++AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP], ++[AC_REQUIRE([LT_AC_PROG_SED])dnl + dnl we can't use the lt_simple_compile_test_code here, + dnl because it contains code intended for an executable, + dnl not a library. It's possible we should let each +@@ -3554,7 +3935,7 @@ + # The `*' in the case matches for architectures that use `case' in + # $output_verbose_cmd can trigger glob expansion during the loop + # eval without this substitution. +- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" ++ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` + + for p in `eval $output_verbose_link_cmd`; do + case $p in +@@ -3630,13 +4011,74 @@ + + $rm -f confest.$objext + ++_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)= ++if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then ++ _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` ++fi ++ ++# PORTME: override above test on systems where it is broken ++ifelse([$1],[CXX], ++[case $host_os in ++interix[[3-9]]*) ++ # Interix 3.5 installs completely hosed .la files for C++, so rather than ++ # hack all around it, let's just trust "g++" to DTRT. ++ _LT_AC_TAGVAR(predep_objects,$1)= ++ _LT_AC_TAGVAR(postdep_objects,$1)= ++ _LT_AC_TAGVAR(postdeps,$1)= ++ ;; ++ ++linux*) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ # ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++ ++solaris*) ++ case $cc_basename in ++ CC*) ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++esac ++]) + case " $_LT_AC_TAGVAR(postdeps, $1) " in + *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; + esac + ])# AC_LIBTOOL_POSTDEP_PREDEP + + # AC_LIBTOOL_LANG_F77_CONFIG +-# ------------------------ ++# -------------------------- + # Ensure that the configuration vars for the C compiler are + # suitably defined. Those variables are subsequently used by + # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +@@ -3672,20 +4114,31 @@ + _LT_AC_TAGVAR(objext, $1)=$objext + + # Code to be used in simple compile tests +-lt_simple_compile_test_code=" subroutine t\n return\n end\n" ++lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" + + # Code to be used in simple link tests +-lt_simple_link_test_code=" program t\n end\n" ++lt_simple_link_test_code="\ ++ program t ++ end ++" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_AC_SYS_COMPILER + ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + CC=${F77-"f77"} + compiler=$CC + _LT_AC_TAGVAR(compiler, $1)=$CC +-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` ++_LT_CC_BASENAME([$compiler]) + + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) +@@ -3695,7 +4148,7 @@ + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. +-case "$host_os" in ++case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then +@@ -3703,8 +4156,10 @@ + postinstall_cmds='$RANLIB $lib' + fi + ;; +-aix4* | aix5*) +- test "$enable_shared" = yes && enable_static=no ++aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) +@@ -3714,8 +4169,6 @@ + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + +-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +- + _LT_AC_TAGVAR(GCC, $1)="$G77" + _LT_AC_TAGVAR(LD, $1)="$LD" + +@@ -3725,8 +4178,6 @@ + AC_LIBTOOL_PROG_LD_SHLIBS($1) + AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) + AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +- + + AC_LIBTOOL_CONFIG($1) + +@@ -3752,23 +4203,30 @@ + _LT_AC_TAGVAR(objext, $1)=$objext + + # Code to be used in simple compile tests +-lt_simple_compile_test_code="class foo {}\n" ++lt_simple_compile_test_code="class foo {}" + + # Code to be used in simple link tests +-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' ++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_AC_SYS_COMPILER + ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + CC=${GCJ-"gcj"} + compiler=$CC + _LT_AC_TAGVAR(compiler, $1)=$CC ++_LT_CC_BASENAME([$compiler]) + + # GCJ did not exist at the time GCC didn't implicitly link libc in. + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ++_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++ + AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) + AC_LIBTOOL_PROG_COMPILER_PIC($1) + AC_LIBTOOL_PROG_CC_C_O($1) +@@ -3776,8 +4234,6 @@ + AC_LIBTOOL_PROG_LD_SHLIBS($1) + AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) + AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF($1) + + AC_LIBTOOL_CONFIG($1) + +@@ -3787,7 +4243,7 @@ + + + # AC_LIBTOOL_LANG_RC_CONFIG +-# -------------------------- ++# ------------------------- + # Ensure that the configuration vars for the Windows resource compiler are + # suitably defined. Those variables are subsequently used by + # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +@@ -3803,7 +4259,7 @@ + _LT_AC_TAGVAR(objext, $1)=$objext + + # Code to be used in simple compile tests +-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' ++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + + # Code to be used in simple link tests + lt_simple_link_test_code="$lt_simple_compile_test_code" +@@ -3811,11 +4267,16 @@ + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_AC_SYS_COMPILER + ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + CC=${RC-"windres"} + compiler=$CC + _LT_AC_TAGVAR(compiler, $1)=$CC ++_LT_CC_BASENAME([$compiler]) + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + + AC_LIBTOOL_CONFIG($1) +@@ -3845,7 +4306,7 @@ + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +@@ -3872,6 +4333,7 @@ + _LT_AC_TAGVAR(predeps, $1) \ + _LT_AC_TAGVAR(postdeps, $1) \ + _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ ++ _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \ + _LT_AC_TAGVAR(archive_cmds, $1) \ + _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ + _LT_AC_TAGVAR(postinstall_cmds, $1) \ +@@ -3887,6 +4349,7 @@ + _LT_AC_TAGVAR(module_cmds, $1) \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) \ + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ ++ _LT_AC_TAGVAR(fix_srcfile_path, $1) \ + _LT_AC_TAGVAR(exclude_expsyms, $1) \ + _LT_AC_TAGVAR(include_expsyms, $1); do + +@@ -3933,7 +4396,7 @@ + # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 + # Free Software Foundation, Inc. + # + # This file is part of GNU Libtool: +@@ -3951,7 +4414,7 @@ + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a +@@ -3962,11 +4425,11 @@ + SED=$lt_SED + + # Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="$SED -e s/^X//" ++Xsed="$SED -e 1s/^X//" + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. +-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + # The names of the tagged configurations supported by this script. + available_tags= +@@ -3997,6 +4460,12 @@ + # The host system. + host_alias=$host_alias + host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + + # An echo program that does not interpret backslashes. + echo=$lt_echo +@@ -4008,6 +4477,9 @@ + # A C compiler. + LTCC=$lt_LTCC + ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ + # A language-specific compiler. + CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +@@ -4073,7 +4545,7 @@ + # Does compiler simultaneously support -c and -o options? + compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +-# Must we lock files when doing compilation ? ++# Must we lock files when doing compilation? + need_locks=$lt_need_locks + + # Do we need the lib prefix for modules? +@@ -4161,6 +4633,10 @@ + # shared library. + postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + ++# The directories searched by this compiler when creating a shared ++# library ++compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1) ++ + # The library search path used internally by the compiler when linking + # a shared library. + compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) +@@ -4249,7 +4725,7 @@ + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + + # Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" ++fix_srcfile_path=$lt_fix_srcfile_path + + # Set to yes if exported symbols are required. + always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) +@@ -4332,6 +4808,7 @@ + # --------------------------------- + AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], + [AC_REQUIRE([AC_CANONICAL_HOST]) ++AC_REQUIRE([LT_AC_PROG_SED]) + AC_REQUIRE([AC_PROG_NM]) + AC_REQUIRE([AC_OBJEXT]) + # Check for command to grab the raw symbol name followed by C symbol from nm. +@@ -4347,9 +4824,6 @@ + # Regexp to match symbols that can be accessed directly from C. + sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +-# Transform the above into a raw symbol and a C symbol. +-symxfrm='\1 \2\3 \3' +- + # Transform an extracted symbol line into a proper C declaration + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +@@ -4371,15 +4845,31 @@ + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; ++linux* | k*bsd*-gnu) ++ if test "$host_cpu" = ia64; then ++ symcode='[[ABCDGIRSTW]]' ++ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++ fi ++ ;; + irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; + osf*) + symcode='[[BCDEGQRST]]' + ;; +-solaris* | sysv5*) ++solaris*) + symcode='[[BDRT]]' + ;; ++sco3.2v5*) ++ symcode='[[DT]]' ++ ;; ++sysv4.2uw2*) ++ symcode='[[DT]]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[[ABDT]]' ++ ;; + sysv4) + symcode='[[DFNSTU]]' + ;; +@@ -4402,8 +4892,11 @@ + # Try without a prefix undercore, then with it. + for ac_symprfx in "" "_"; do + ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" ++ + # Write the raw and C identifiers. +- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -4493,7 +4986,7 @@ + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi +- rm -f conftest* conftst* ++ rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then +@@ -4542,13 +5035,16 @@ + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; +- mingw* | os2* | pw32*) ++ mingw* | cygwin* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform +@@ -4559,6 +5055,10 @@ + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic +@@ -4567,7 +5067,7 @@ + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + ;; + *) +@@ -4581,7 +5081,7 @@ + esac + else + case $host_os in +- aix4* | aix5*) ++ aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor +@@ -4592,18 +5092,28 @@ + ;; + chorus*) + case $cc_basename in +- cxch68) ++ cxch68*) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ esac ++ ;; + dgux*) + case $cc_basename in +- ec++) ++ ec++*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; +- ghcx) ++ ghcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; +@@ -4611,22 +5121,22 @@ + ;; + esac + ;; +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in +- CC) ++ CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; +- aCC) ++ aCC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" +- case "$host_cpu" in ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -4639,9 +5149,13 @@ + ;; + esac + ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in +- CC) ++ CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. +@@ -4650,20 +5164,26 @@ + ;; + esac + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in +- KCC) ++ KCC*) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; +- icpc) ++ icpc* | ecpc*) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; +- cxx) ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler. ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. +@@ -4671,6 +5191,14 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ esac + ;; + esac + ;; +@@ -4680,25 +5208,25 @@ + ;; + mvs*) + case $cc_basename in +- cxx) ++ cxx*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in +- KCC) ++ KCC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; +- RCC) ++ RCC*) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; +- cxx) ++ cxx*) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha +@@ -4712,24 +5240,15 @@ + ;; + psos*) + ;; +- sco*) +- case $cc_basename in +- CC) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- *) +- ;; +- esac +- ;; + solaris*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; +- gcx) ++ gcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; +@@ -4739,12 +5258,12 @@ + ;; + sunos4*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; +- lcc) ++ lcc*) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; +@@ -4754,7 +5273,7 @@ + ;; + tandem*) + case $cc_basename in +- NCC) ++ NCC*) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; +@@ -4762,7 +5281,14 @@ + ;; + esac + ;; +- unixware*) ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ esac + ;; + vxworks*) + ;; +@@ -4793,14 +5319,17 @@ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + +- mingw* | pw32* | os2*) ++ mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) +@@ -4809,6 +5338,11 @@ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. +@@ -4825,7 +5359,7 @@ + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -4851,18 +5385,29 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ esac ++ ;; + +- mingw* | pw32* | os2*) ++ mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ++ m4_if([$1], [GCJ], [], ++ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -4885,18 +5430,41 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + +- linux*) +- case $CC in ++ linux* | k*bsd*-gnu) ++ case $cc_basename in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' ++ ;; ++ esac ++ ;; + esac + ;; + +@@ -4906,15 +5474,19 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + +- sco3.2v5*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' ++ rdos*) ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; ++ esac + ;; + + sunos4*) +@@ -4923,7 +5495,7 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +@@ -4936,6 +5508,17 @@ + fi + ;; + ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ unicos*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +@@ -4954,7 +5537,7 @@ + # + if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], +- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), ++ _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; +@@ -4963,7 +5546,7 @@ + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) + fi +-case "$host_os" in ++case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +@@ -4972,6 +5555,16 @@ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; + esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" ++AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], ++ _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1), ++ $lt_tmp_static_flag, ++ [], ++ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) + ]) + + +@@ -4979,11 +5572,12 @@ + # ------------------------------------ + # See if the linker supports building shared libraries. + AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++[AC_REQUIRE([LT_AC_PROG_SED])dnl ++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in +- aix4* | aix5*) ++ aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +@@ -4996,12 +5590,16 @@ + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac ++ _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + ],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= +@@ -5032,14 +5630,17 @@ + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. +- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" ++ _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= +- ++ # Just being paranoid about ensuring that cc_basename is set. ++ _LT_CC_BASENAME([$compiler]) + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time +@@ -5049,6 +5650,10 @@ + with_gnu_ld=no + fi + ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; + openbsd*) + with_gnu_ld=no + ;; +@@ -5059,9 +5664,30 @@ + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ + # See if GNU ld supports shared libraries. + case $host_os in +- aix3* | aix4* | aix5*) ++ aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no +@@ -5109,10 +5735,10 @@ + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +@@ -5121,28 +5747,84 @@ + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else +- ld_shlibs=no ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi ++ interix[[3-9]]*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + +- solaris* | sysv5*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <&2 +- +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++ gnu* | linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ *) ++ tmp_sharedflag='-shared' ;; ++ esac ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ cat <&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably + *** create shared libraries on Solaris systems. Therefore, libtool + *** is disabling shared libraries support. We urge you to upgrade GNU + *** binutils to release 2.9.1 or newer. Another option is to modify +@@ -5158,6 +5840,33 @@ + fi + ;; + ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= +@@ -5165,31 +5874,6 @@ + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + +- linux*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds" +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- if test $supports_anon_versioning = yes; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ +-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +-$echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- else +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds" +- fi +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +@@ -5200,16 +5884,11 @@ + ;; + esac + +- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then +- runpath_var=LD_RUN_PATH +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- fi ++ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then ++ runpath_var= ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) +@@ -5221,14 +5900,14 @@ + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + +- aix4* | aix5*) ++ aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. +@@ -5248,13 +5927,14 @@ + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. +- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done ++ ;; + esac + + exp_sym_flag='-bexport' +@@ -5273,7 +5953,7 @@ + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` +@@ -5281,7 +5961,7 @@ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ : + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +@@ -5292,8 +5972,12 @@ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi ++ ;; + esac + shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi + else + # not using gcc + if test "$host_cpu" = ia64; then +@@ -5301,11 +5985,11 @@ + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else +- if test "$aix_use_runtimelinking" = yes; then ++ if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' +- fi ++ fi + fi + fi + +@@ -5319,12 +6003,12 @@ + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX +@@ -5333,13 +6017,11 @@ + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; +@@ -5352,7 +6034,7 @@ + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + +- bsdi4*) ++ bsdi[[45]]*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + +@@ -5372,58 +6054,57 @@ + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' ++ _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) +- if test "$GXX" = yes ; then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case "$host_os" in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; ++ case $host_os in ++ rhapsody* | darwin1.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; + esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac + fi + ;; + +@@ -5457,7 +6138,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes +@@ -5480,47 +6161,62 @@ + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + +- hpux10* | hpux11*) ++ hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*|ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +- case "$host_cpu" in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- ia64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + *) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + +@@ -5544,7 +6240,7 @@ + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -5564,23 +6260,28 @@ + ;; + + openbsd*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ if test -f /usr/libexec/ld.so; then ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ else ++ case $host_os in ++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi + else +- case $host_os in +- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- ;; +- esac ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + +@@ -5613,7 +6314,7 @@ + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +@@ -5621,21 +6322,15 @@ + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + +- sco3.2v5*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; +- + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then ++ wlarc='${wl}' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else ++ wlarc='' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +@@ -5644,8 +6339,17 @@ + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ fi ++ ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; +@@ -5702,36 +6406,45 @@ + fi + ;; + +- sysv4.2uw2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; ++ runpath_var='LD_RUN_PATH' + +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi +- runpath_var='LD_RUN_PATH' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + +- sysv5*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi + ;; + + uts4*) +@@ -5749,11 +6462,6 @@ + AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) + test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +- + # + # Do we need to explicitly link libc? + # +@@ -5773,7 +6481,7 @@ + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest +@@ -5781,6 +6489,7 @@ + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) ++ pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= +@@ -5875,6 +6584,30 @@ + [AC_CHECK_TOOL(RC, windres, no) + ]) + ++ ++# Cheap backport of AS_EXECUTABLE_P and required macros ++# from Autoconf 2.59; we should not use $as_executable_p directly. ++ ++# _AS_TEST_PREPARE ++# ---------------- ++m4_ifndef([_AS_TEST_PREPARE], ++[m4_defun([_AS_TEST_PREPARE], ++[if test -x / >/dev/null 2>&1; then ++ as_executable_p='test -x' ++else ++ as_executable_p='test -f' ++fi ++])])# _AS_TEST_PREPARE ++ ++# AS_EXECUTABLE_P ++# --------------- ++# Check whether a file is executable. ++m4_ifndef([AS_EXECUTABLE_P], ++[m4_defun([AS_EXECUTABLE_P], ++[AS_REQUIRE([_AS_TEST_PREPARE])dnl ++$as_executable_p $1[]dnl ++])])# AS_EXECUTABLE_P ++ + # NOTE: This macro has been submitted for inclusion into # + # GNU Autoconf as AC_PROG_SED. When it is available in # + # a released version of Autoconf we should remove this # +@@ -5895,18 +6628,19 @@ + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then ++ if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done + done ++IFS=$as_save_IFS + lt_ac_max=0 + lt_ac_count=0 + # Add /usr/xpg4/bin/sed as it is typically found on Solaris + # along with /bin/sed that truncates output. + for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && break ++ test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in +@@ -5931,60 +6665,55 @@ + fi + done + done +-SED=$lt_cv_path_SED + ]) ++SED=$lt_cv_path_SED ++AC_SUBST([SED]) + AC_MSG_RESULT([$SED]) + ]) + +-# -*- Autoconf -*- +-# Copyright (C) 2002, 2003 Free Software Foundation, Inc. +-# Generated from amversion.in; do not edit by hand. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ++# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + + # AM_AUTOMAKE_VERSION(VERSION) + # ---------------------------- + # Automake X.Y traces this macro to ensure aclocal.m4 has been + # generated from the m4 files accompanying Automake X.Y. +-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) ++# (This private macro should not be called outside this file.) ++AC_DEFUN([AM_AUTOMAKE_VERSION], ++[am__api_version='1.10' ++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to ++dnl require some minimum version. Point them to the right macro. ++m4_if([$1], [1.10.1], [], ++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ++]) ++ ++# _AM_AUTOCONF_VERSION(VERSION) ++# ----------------------------- ++# aclocal traces this macro to find the Autoconf version. ++# This is a private macro too. Using m4_define simplifies ++# the logic in aclocal, which can simply ignore this definition. ++m4_define([_AM_AUTOCONF_VERSION], []) + + # AM_SET_CURRENT_AUTOMAKE_VERSION + # ------------------------------- +-# Call AM_AUTOMAKE_VERSION so it can be traced. ++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. + # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. + AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +- [AM_AUTOMAKE_VERSION([1.8.3])]) +- +-# AM_AUX_DIR_EXPAND +- +-# Copyright (C) 2001, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++[AM_AUTOMAKE_VERSION([1.10.1])dnl ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) + +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + + # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets + # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +@@ -6031,26 +6760,16 @@ + am_aux_dir=`cd $ac_aux_dir && pwd` + ]) + +-# AM_CONDITIONAL -*- Autoconf -*- +- +-# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# AM_CONDITIONAL -*- Autoconf -*- + +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# serial 6 ++# serial 8 + + # AM_CONDITIONAL(NAME, SHELL-CONDITION) + # ------------------------------------- +@@ -6059,8 +6778,10 @@ + [AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +-AC_SUBST([$1_TRUE]) +-AC_SUBST([$1_FALSE]) ++AC_SUBST([$1_TRUE])dnl ++AC_SUBST([$1_FALSE])dnl ++_AM_SUBST_NOTMAKE([$1_TRUE])dnl ++_AM_SUBST_NOTMAKE([$1_FALSE])dnl + if $2; then + $1_TRUE= + $1_FALSE='#' +@@ -6070,30 +6791,18 @@ + fi + AC_CONFIG_COMMANDS_PRE( + [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then +- AC_MSG_ERROR([conditional "$1" was never defined. +-Usually this means the macro was only invoked conditionally.]) ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) + fi])]) + +-# serial 7 -*- Autoconf -*- +- +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + # Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- ++# serial 9 + + # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be + # written in clear, in which case automake, when reading aclocal.m4, +@@ -6102,7 +6811,6 @@ + # CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +- + # _AM_DEPENDENCIES(NAME) + # ---------------------- + # See how the compiler implements dependency checking. +@@ -6122,6 +6830,7 @@ + ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +@@ -6187,13 +6896,19 @@ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings +- # (even with -Werror). So we grep stderr for any message +- # that says an option was ignored. +- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi +@@ -6234,29 +6949,20 @@ + AMDEPBACKSLASH='\' + fi + AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +-AC_SUBST([AMDEPBACKSLASH]) ++AC_SUBST([AMDEPBACKSLASH])dnl ++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl + ]) + +-# Generate code to set up dependency tracking. -*- Autoconf -*- +- +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# Generate code to set up dependency tracking. -*- Autoconf -*- + +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-#serial 2 ++#serial 3 + + # _AM_OUTPUT_DEPENDENCY_COMMANDS + # ------------------------------ +@@ -6269,33 +6975,28 @@ + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. +- # So let's grep whole file. +- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi +- grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue +- # Extract the definition of DEP_FILES from the Makefile without +- # running `make'. ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` +- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" +- # We invoke sed twice because it is the simplest approach to +- # changing $(DEPDIR) to its actual value in the expansion. +- for file in `sed -n ' +- /^DEP_FILES = .*\\\\$/ { +- s/^DEP_FILES = // +- :loop +- s/\\\\$// +- p +- n +- /\\\\$/ b loop +- p +- } +- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue +@@ -6321,30 +7022,19 @@ + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) + ]) + +-# Do all the work for Automake. -*- Autoconf -*- +- +-# This macro actually does too much some checks are only needed if +-# your package does certain things. But this isn't really a big deal. +- +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +-# Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# Do all the work for Automake. -*- Autoconf -*- + +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ++# 2005, 2006, 2008 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# serial 13 + +-# serial 11 ++# This macro actually does too much. Some checks are only needed if ++# your package does certain things. But this isn't really a big deal. + + # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) + # AM_INIT_AUTOMAKE([OPTIONS]) +@@ -6358,16 +7048,20 @@ + # arguments mandatory, and then we can depend on a new Autoconf + # release and drop the old call support. + AC_DEFUN([AM_INIT_AUTOMAKE], +-[AC_PREREQ([2.58])dnl ++[AC_PREREQ([2.60])dnl + dnl Autoconf wants to disallow AM_ names. We explicitly allow + dnl the ones we care about. + m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl + AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl + AC_REQUIRE([AC_PROG_INSTALL])dnl +-# test to see if srcdir already configured +-if test "`cd $srcdir && pwd`" != "`pwd`" && +- test -f $srcdir/config.status; then +- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++ fi + fi + + # test whether we have cygpath +@@ -6387,6 +7081,9 @@ + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], + [_AM_SET_OPTIONS([$1])dnl ++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. ++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, ++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +@@ -6402,7 +7099,6 @@ + AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) + AM_MISSING_PROG(AUTOHEADER, autoheader) + AM_MISSING_PROG(MAKEINFO, makeinfo) +-AM_MISSING_PROG(AMTAR, tar) + AM_PROG_INSTALL_SH + AM_PROG_INSTALL_STRIP + AC_REQUIRE([AM_PROG_MKDIR_P])dnl +@@ -6411,7 +7107,9 @@ + AC_REQUIRE([AC_PROG_AWK])dnl + AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AM_SET_LEADING_DOT])dnl +- ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) + _AM_IF_OPTION([no-dependencies],, + [AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], +@@ -6421,6 +7119,10 @@ + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_OBJC], ++ [_AM_DEPENDENCIES(OBJC)], ++ [define([AC_PROG_OBJC], ++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl + ]) + ]) + +@@ -6434,62 +7136,39 @@ + # our stamp files there. + AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], + [# Compute $1's index in $config_headers. ++_am_arg=$1 + _am_stamp_count=1 + for _am_header in $config_headers :; do + case $_am_header in +- $1 | $1:* ) ++ $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac + done +-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) ++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) ++ ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + + # AM_PROG_INSTALL_SH + # ------------------ + # Define $install_sh. +- +-# Copyright (C) 2001, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- + AC_DEFUN([AM_PROG_INSTALL_SH], + [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-install_sh=${install_sh-"$am_aux_dir/install-sh"} ++install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} + AC_SUBST(install_sh)]) + +-# -*- Autoconf -*- +-# Copyright (C) 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# serial 1 ++# serial 2 + + # Check whether the underlying file-system supports filenames + # with a leading dot. For instance MS-DOS doesn't. +@@ -6504,26 +7183,44 @@ + rmdir .tst 2>/dev/null + AC_SUBST([am__leading_dot])]) + +-# Check to see how 'make' treats includes. -*- Autoconf -*- ++# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- ++# From Jim Meyering + +-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. ++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# serial 4 + +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++AC_DEFUN([AM_MAINTAINER_MODE], ++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) ++ dnl maintainer-mode is disabled by default ++ AC_ARG_ENABLE(maintainer-mode, ++[ --enable-maintainer-mode enable make rules and dependencies not useful ++ (and sometimes confusing) to the casual installer], ++ USE_MAINTAINER_MODE=$enableval, ++ USE_MAINTAINER_MODE=no) ++ AC_MSG_RESULT([$USE_MAINTAINER_MODE]) ++ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) ++ MAINT=$MAINTAINER_MODE_TRUE ++ AC_SUBST(MAINT)dnl ++] ++) + +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + +-# serial 2 ++# Check to see how 'make' treats includes. -*- Autoconf -*- ++ ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 3 + + # AM_MAKE_INCLUDE() + # ----------------- +@@ -6567,32 +7264,22 @@ + rm -f confinc confmf + ]) + +-# serial 2 ++# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 5 + + # AM_PROG_CC_C_O + # -------------- + # Like AC_PROG_CC_C_O, but changed for automake. +- +-# Copyright (C) 1999, 2000, 2001, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- + AC_DEFUN([AM_PROG_CC_C_O], + [AC_REQUIRE([AC_PROG_CC_C_O])dnl + AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([compile])dnl + # FIXME: we rely on the cache variable name because + # there is no other way. + set dummy $CC +@@ -6605,29 +7292,22 @@ + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" + fi ++dnl Make sure AC_PROG_CC is never called again, or it will override our ++dnl setting of CC. ++m4_define([AC_PROG_CC], ++ [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) + ]) + +-# -*- Autoconf -*- +- +- +-# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# serial 3 ++# serial 5 + + # AM_MISSING_PROG(NAME, PROGRAM) + # ------------------------------ +@@ -6643,6 +7323,7 @@ + # If it does, set am_missing_run to use it, otherwise, to nothing. + AC_DEFUN([AM_MISSING_HAS_RUN], + [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([missing])dnl + test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" + # Use eval to expand $SHELL + if eval "$MISSING --run true"; then +@@ -6653,92 +7334,41 @@ + fi + ]) + ++# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ + # AM_PROG_MKDIR_P + # --------------- +-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. +- +-# Copyright (C) 2003, 2004 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- +-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories +-# created by `make install' are always world readable, even if the +-# installer happens to have an overly restrictive umask (e.g. 077). +-# This was a mistake. There are at least two reasons why we must not +-# use `-m 0755': +-# - it causes special bits like SGID to be ignored, +-# - it may be too restrictive (some setups expect 775 directories). +-# +-# Do not use -m 0755 and let people choose whatever they expect by +-# setting umask. +-# +-# We cannot accept any implementation of `mkdir' that recognizes `-p'. +-# Some implementations (such as Solaris 8's) are not thread-safe: if a +-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' +-# concurrently, both version can detect that a/ is missing, but only +-# one can create it and the other will error out. Consequently we +-# restrict ourselves to GNU make (using the --version option ensures +-# this.) ++# Check for `mkdir -p'. + AC_DEFUN([AM_PROG_MKDIR_P], +-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then +- # Keeping the `.' argument allows $(mkdir_p) to be used without +- # argument. Indeed, we sometimes output rules like +- # $(mkdir_p) $(somedir) +- # where $(somedir) is conditionally defined. +- # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more +- # expensive solution, as it forces Make to start a sub-shell.) +- mkdir_p='mkdir -p -- .' +-else +- # On NextStep and OpenStep, the `mkdir' command does not +- # recognize any option. It will interpret all options as +- # directories to create, and then abort because `.' already +- # exists. +- for d in ./-p ./--version; +- do +- test -d $d && rmdir $d +- done +- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. +- if test -f "$ac_aux_dir/mkinstalldirs"; then +- mkdir_p='$(mkinstalldirs)' +- else +- mkdir_p='$(install_sh) -d' +- fi +-fi +-AC_SUBST([mkdir_p])]) +- +-# Helper functions for option handling. -*- Autoconf -*- +- +-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++[AC_PREREQ([2.60])dnl ++AC_REQUIRE([AC_PROG_MKDIR_P])dnl ++dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, ++dnl while keeping a definition of mkdir_p for backward compatibility. ++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. ++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of ++dnl Makefile.ins that do not define MKDIR_P, so we do our own ++dnl adjustment using top_builddir (which is defined more often than ++dnl MKDIR_P). ++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl ++case $mkdir_p in ++ [[\\/$]]* | ?:[[\\/]]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac ++]) + +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# Helper functions for option handling. -*- Autoconf -*- + +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# serial 2 ++# serial 3 + + # _AM_MANGLE_OPTION(NAME) + # ----------------------- +@@ -6763,28 +7393,16 @@ + AC_DEFUN([_AM_IF_OPTION], + [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +-# +-# Check to make sure that the build environment is sane. +-# +- +-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. ++# Check to make sure that the build environment is sane. -*- Autoconf -*- + +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# serial 3 ++# serial 4 + + # AM_SANITY_CHECK + # --------------- +@@ -6827,25 +7445,14 @@ + fi + AC_MSG_RESULT(yes)]) + +-# AM_PROG_INSTALL_STRIP +- +-# Copyright (C) 2001, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + ++# AM_PROG_INSTALL_STRIP ++# --------------------- + # One issue with vendor `install' (even GNU) is that you can't + # specify the program used to strip binaries. This is especially + # annoying in cross-compiling environments, where the build's strip +@@ -6863,7 +7470,115 @@ + if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) + fi +-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + AC_SUBST([INSTALL_STRIP_PROGRAM])]) + ++# Copyright (C) 2006 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# _AM_SUBST_NOTMAKE(VARIABLE) ++# --------------------------- ++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. ++# This macro is traced by Automake. ++AC_DEFUN([_AM_SUBST_NOTMAKE]) ++ ++# Check how to create a tarball. -*- Autoconf -*- ++ ++# Copyright (C) 2004, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 2 ++ ++# _AM_PROG_TAR(FORMAT) ++# -------------------- ++# Check how to create a tarball in format FORMAT. ++# FORMAT should be one of `v7', `ustar', or `pax'. ++# ++# Substitute a variable $(am__tar) that is a command ++# writing to stdout a FORMAT-tarball containing the directory ++# $tardir. ++# tardir=directory && $(am__tar) > result.tar ++# ++# Substitute a variable $(am__untar) that extract such ++# a tarball read from stdin. ++# $(am__untar) < result.tar ++AC_DEFUN([_AM_PROG_TAR], ++[# Always define AMTAR for backward compatibility. ++AM_MISSING_PROG([AMTAR], [tar]) ++m4_if([$1], [v7], ++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], ++ [m4_case([$1], [ustar],, [pax],, ++ [m4_fatal([Unknown tar format])]) ++AC_MSG_CHECKING([how to create a $1 tar archive]) ++# Loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++_am_tools=${am_cv_prog_tar_$1-$_am_tools} ++# Do not fold the above two line into one, because Tru64 sh and ++# Solaris sh will not grok spaces in the rhs of `-'. ++for _am_tool in $_am_tools ++do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; ++ do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac ++ ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break ++ ++ # tar/untar a dummy directory, and stop if the command works ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break ++ fi ++done ++rm -rf conftest.dir ++ ++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++AC_MSG_RESULT([$am_cv_prog_tar_$1])]) ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) # _AM_PROG_TAR ++ + m4_include([acinclude.m4]) +--- a/configure ++++ b/configure +@@ -1,25 +1,54 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.59 for libusb 0.1.12. ++# Generated by GNU Autoconf 2.61 for libusb 0.1.12. + # +-# Copyright (C) 2003 Free Software Foundation, Inc. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## + ## M4sh Initialization. ## + ## --------------------- ## + +-# Be Bourne compatible ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi +-DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +@@ -29,8 +58,43 @@ + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -44,18 +108,19 @@ + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -63,157 +128,388 @@ + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + ++# CDPATH. ++$as_unset CDPATH + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no + fi + ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in ++ case $as_dir in + /*) +- if ("$as_dir/$as_base" -c ' ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || ++ chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -222,7 +518,28 @@ + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -231,15 +548,6 @@ + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- + + + # Check that we are running under the correct shell. +@@ -278,15 +586,15 @@ + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. +-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + if test -z "$ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string="`eval $cmd`") 2>/dev/null && +- echo_test_string="`eval $cmd`" && ++ if (echo_test_string=`eval $cmd`) 2>/dev/null && ++ echo_test_string=`eval $cmd` && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break +@@ -395,29 +703,26 @@ + + tagnames=${tagnames+${tagnames},}F77 + ++exec 7<&0 &1 ++ + # Name of the host. + # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +-exec 6>&1 +- + # + # Initializations. + # + ac_default_prefix=/usr/local ++ac_clean_files= + ac_config_libobj_dir=. ++LIBOBJS= + cross_compiling=no + subdirs= + MFLAGS= + MAKEFLAGS= + SHELL=${CONFIG_SHELL-/bin/sh} + +-# Maximum number of lines to put in a shell here document. +-# This variable seems obsolete. It should probably be removed, and +-# only ac_max_sed_lines should be used. +-: ${ac_max_here_lines=38} +- + # Identity of this package. + PACKAGE_NAME='libusb' + PACKAGE_TARNAME='libusb' +@@ -429,42 +734,196 @@ + # Factoring default headers for most tests. + ac_includes_default="\ + #include +-#if HAVE_SYS_TYPES_H ++#ifdef HAVE_SYS_TYPES_H + # include + #endif +-#if HAVE_SYS_STAT_H ++#ifdef HAVE_SYS_STAT_H + # include + #endif +-#if STDC_HEADERS ++#ifdef STDC_HEADERS + # include + # include + #else +-# if HAVE_STDLIB_H ++# ifdef HAVE_STDLIB_H + # include + # endif + #endif +-#if HAVE_STRING_H +-# if !STDC_HEADERS && HAVE_MEMORY_H ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H + # include + # endif + # include + #endif +-#if HAVE_STRINGS_H ++#ifdef HAVE_STRINGS_H + # include + #endif +-#if HAVE_INTTYPES_H ++#ifdef HAVE_INTTYPES_H + # include +-#else +-# if HAVE_STDINT_H +-# include +-# endif + #endif +-#if HAVE_UNISTD_H ++#ifdef HAVE_STDINT_H ++# include ++#endif ++#ifdef HAVE_UNISTD_H + # include + #endif" + +-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot LIBUSB_MAJOR_VERSION LIBUSB_MINOR_VERSION LIBUSB_MICRO_VERSION LIBUSB_VERSION LIBUSB_INTERFACE_AGE LIBUSB_BINARY_AGE LT_RELEASE LT_CURRENT LT_REVISION LT_AGE build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL DARWIN_API LINUX_API BSD_API LINUX_API_TRUE LINUX_API_FALSE BSD_API_TRUE BSD_API_FALSE DARWIN_API_TRUE DARWIN_API_FALSE OSLIBS BIGENDIAN PKG_CONFIG pkgconfigdir JADE LIBUSB_HAVE_DOT DOXYGEN DOXYGEN_PROJECT_NAME DOXYGEN_PROJECT_NUMBER LIBUSB_HAS_DOXYGEN BUILD_DOCS_TRUE BUILD_DOCS_FALSE LIBOBJS LTLIBOBJS' ++ac_subst_vars='SHELL ++PATH_SEPARATOR ++PACKAGE_NAME ++PACKAGE_TARNAME ++PACKAGE_VERSION ++PACKAGE_STRING ++PACKAGE_BUGREPORT ++exec_prefix ++prefix ++program_transform_name ++bindir ++sbindir ++libexecdir ++datarootdir ++datadir ++sysconfdir ++sharedstatedir ++localstatedir ++includedir ++oldincludedir ++docdir ++infodir ++htmldir ++dvidir ++pdfdir ++psdir ++libdir ++localedir ++mandir ++DEFS ++ECHO_C ++ECHO_N ++ECHO_T ++LIBS ++build_alias ++host_alias ++target_alias ++INSTALL_PROGRAM ++INSTALL_SCRIPT ++INSTALL_DATA ++am__isrc ++CYGPATH_W ++PACKAGE ++VERSION ++ACLOCAL ++AUTOCONF ++AUTOMAKE ++AUTOHEADER ++MAKEINFO ++install_sh ++STRIP ++INSTALL_STRIP_PROGRAM ++mkdir_p ++AWK ++SET_MAKE ++am__leading_dot ++AMTAR ++am__tar ++am__untar ++MAINTAINER_MODE_TRUE ++MAINTAINER_MODE_FALSE ++MAINT ++LIBUSB_MAJOR_VERSION ++LIBUSB_MINOR_VERSION ++LIBUSB_MICRO_VERSION ++LIBUSB_VERSION ++LIBUSB_INTERFACE_AGE ++LIBUSB_BINARY_AGE ++LT_RELEASE ++LT_CURRENT ++LT_REVISION ++LT_AGE ++build ++build_cpu ++build_vendor ++build_os ++host ++host_cpu ++host_vendor ++host_os ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++ac_ct_CC ++EXEEXT ++OBJEXT ++DEPDIR ++am__include ++am__quote ++AMDEP_TRUE ++AMDEP_FALSE ++AMDEPBACKSLASH ++CCDEPMODE ++am__fastdepCC_TRUE ++am__fastdepCC_FALSE ++SED ++GREP ++EGREP ++LN_S ++ECHO ++AR ++RANLIB ++DSYMUTIL ++NMEDIT ++CPP ++CXX ++CXXFLAGS ++ac_ct_CXX ++CXXDEPMODE ++am__fastdepCXX_TRUE ++am__fastdepCXX_FALSE ++CXXCPP ++F77 ++FFLAGS ++ac_ct_F77 ++LIBTOOL ++DARWIN_API ++LINUX_API ++BSD_API ++LINUX_API_TRUE ++LINUX_API_FALSE ++BSD_API_TRUE ++BSD_API_FALSE ++DARWIN_API_TRUE ++DARWIN_API_FALSE ++OSLIBS ++BIGENDIAN ++PKG_CONFIG ++pkgconfigdir ++JADE ++LIBUSB_HAVE_DOT ++DOXYGEN ++DOXYGEN_PROJECT_NAME ++DOXYGEN_PROJECT_NUMBER ++LIBUSB_HAS_DOXYGEN ++BUILD_DOCS_TRUE ++BUILD_DOCS_FALSE ++LIBOBJS ++LTLIBOBJS' + ac_subst_files='' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++CPP ++CXX ++CXXFLAGS ++CCC ++CXXCPP ++F77 ++FFLAGS' ++ + + # Initialize some variables set by options. + ac_init_help= +@@ -491,34 +950,48 @@ + # and all the variables that are supposed to be based on exec_prefix + # by default will actually change. + # Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' +-datadir='${prefix}/share' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' + sysconfdir='${prefix}/etc' + sharedstatedir='${prefix}/com' + localstatedir='${prefix}/var' +-libdir='${exec_prefix}/lib' + includedir='${prefix}/include' + oldincludedir='/usr/include' +-infodir='${prefix}/info' +-mandir='${prefix}/man' ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' + + ac_prev= ++ac_dashdash= + for ac_option + do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then +- eval "$ac_prev=\$ac_option" ++ eval $ac_prev=\$ac_option + ac_prev= + continue + fi + +- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + +- case $ac_option in ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; +@@ -540,33 +1013,45 @@ + --config-cache | -C) + cache_file=config.cache ;; + +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ +- | --da=*) ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- eval "enable_$ac_feature=no" ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "enable_$ac_feature='$ac_optarg'" ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -593,6 +1078,12 @@ + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; +@@ -617,13 +1108,16 @@ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ + -localstatedir | --localstatedir | --localstatedi | --localstated \ +- | --localstate | --localstat | --localsta | --localst \ +- | --locals | --local | --loca | --loc | --lo) ++ | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) +@@ -688,6 +1182,16 @@ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; +@@ -740,24 +1244,20 @@ + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package| sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "with_$ac_package='$ac_optarg'" ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package | sed 's/-/_/g'` +- eval "with_$ac_package=no" ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. +@@ -788,8 +1288,7 @@ + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } +- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` +- eval "$ac_envvar='$ac_optarg'" ++ eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) +@@ -809,27 +1308,19 @@ + { (exit 1); exit 1; }; } + fi + +-# Be sure to have absolute paths. +-for ac_var in exec_prefix prefix ++# Be sure to have absolute directory names. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir + do +- eval ac_val=$`echo $ac_var` ++ eval ac_val=\$$ac_var + case $ac_val in +- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; +- esac +-done +- +-# Be sure to have absolute paths. +-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ +- localstatedir libdir includedir oldincludedir infodir mandir +-do +- eval ac_val=$`echo $ac_var` +- case $ac_val in +- [\\/$]* | ?:[\\/]* ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } + done + + # There might be people who depend on the old broken behavior: `$host' +@@ -856,94 +1347,76 @@ + test "$silent" = yes && exec 6>/dev/null + + ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { echo "$as_me: error: Working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes +- # Try the directory containing this script, then its parent. +- ac_confdir=`(dirname "$0") 2>/dev/null || ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$0" || + $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X"$0" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + srcdir=$ac_confdir +- if test ! -r $srcdir/$ac_unique_file; then ++ if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi + else + ac_srcdir_defaulted=no + fi +-if test ! -r $srcdir/$ac_unique_file; then +- if test "$ac_srcdir_defaulted" = yes; then +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +- else +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 +- { (exit 1); exit 1; }; } +- fi + fi +-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || +- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } +-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +-ac_env_build_alias_set=${build_alias+set} +-ac_env_build_alias_value=$build_alias +-ac_cv_env_build_alias_set=${build_alias+set} +-ac_cv_env_build_alias_value=$build_alias +-ac_env_host_alias_set=${host_alias+set} +-ac_env_host_alias_value=$host_alias +-ac_cv_env_host_alias_set=${host_alias+set} +-ac_cv_env_host_alias_value=$host_alias +-ac_env_target_alias_set=${target_alias+set} +-ac_env_target_alias_value=$target_alias +-ac_cv_env_target_alias_set=${target_alias+set} +-ac_cv_env_target_alias_value=$target_alias +-ac_env_CC_set=${CC+set} +-ac_env_CC_value=$CC +-ac_cv_env_CC_set=${CC+set} +-ac_cv_env_CC_value=$CC +-ac_env_CFLAGS_set=${CFLAGS+set} +-ac_env_CFLAGS_value=$CFLAGS +-ac_cv_env_CFLAGS_set=${CFLAGS+set} +-ac_cv_env_CFLAGS_value=$CFLAGS +-ac_env_LDFLAGS_set=${LDFLAGS+set} +-ac_env_LDFLAGS_value=$LDFLAGS +-ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +-ac_cv_env_LDFLAGS_value=$LDFLAGS +-ac_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_env_CPPFLAGS_value=$CPPFLAGS +-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_cv_env_CPPFLAGS_value=$CPPFLAGS +-ac_env_CPP_set=${CPP+set} +-ac_env_CPP_value=$CPP +-ac_cv_env_CPP_set=${CPP+set} +-ac_cv_env_CPP_value=$CPP +-ac_env_CXX_set=${CXX+set} +-ac_env_CXX_value=$CXX +-ac_cv_env_CXX_set=${CXX+set} +-ac_cv_env_CXX_value=$CXX +-ac_env_CXXFLAGS_set=${CXXFLAGS+set} +-ac_env_CXXFLAGS_value=$CXXFLAGS +-ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} +-ac_cv_env_CXXFLAGS_value=$CXXFLAGS +-ac_env_CXXCPP_set=${CXXCPP+set} +-ac_env_CXXCPP_value=$CXXCPP +-ac_cv_env_CXXCPP_set=${CXXCPP+set} +-ac_cv_env_CXXCPP_value=$CXXCPP +-ac_env_F77_set=${F77+set} +-ac_env_F77_value=$F77 +-ac_cv_env_F77_set=${F77+set} +-ac_cv_env_F77_value=$F77 +-ac_env_FFLAGS_set=${FFLAGS+set} +-ac_env_FFLAGS_value=$FFLAGS +-ac_cv_env_FFLAGS_set=${FFLAGS+set} +-ac_cv_env_FFLAGS_value=$FFLAGS ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done + + # + # Report the --help message. +@@ -972,9 +1445,6 @@ + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +-_ACEOF +- +- cat <<_ACEOF + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] +@@ -992,15 +1462,22 @@ + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] +- --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --infodir=DIR info documentation [PREFIX/info] +- --mandir=DIR man documentation [PREFIX/man] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/libusb] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] + _ACEOF + + cat <<\_ACEOF +@@ -1025,10 +1502,10 @@ + Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] +- --enable-shared[=PKGS] +- build shared libraries [default=yes] +- --enable-static[=PKGS] +- build static libraries [default=yes] ++ --enable-maintainer-mode enable make rules and dependencies not useful ++ (and sometimes confusing) to the casual installer ++ --enable-shared[=PKGS] build shared libraries [default=yes] ++ --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-dependency-tracking speeds up one-time build +@@ -1043,8 +1520,7 @@ + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic try to use only PIC/non-PIC objects [default=use + both] +- --with-tags[=TAGS] +- include additional configurations [automatic] ++ --with-tags[=TAGS] include additional configurations [automatic] + --without-pkgconfig don"t use pkg-config + + Some influential environment variables: +@@ -1052,8 +1528,9 @@ + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory +- CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have +- headers in a nonstandard directory ++ LIBS libraries to pass to the linker, e.g. -l ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory + CPP C preprocessor + CXX C++ compiler command + CXXFLAGS C++ compiler flags +@@ -1065,120 +1542,86 @@ + it to find libraries and programs with nonstandard names/locations. + + _ACEOF ++ac_status=$? + fi + + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. +- ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d $ac_dir || continue ++ test -d "$ac_dir" || continue + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac +- +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +- cd $ac_dir +- # Check for guested configure; otherwise get Cygnus style configure. +- if test -f $ac_srcdir/configure.gnu; then +- echo +- $SHELL $ac_srcdir/configure.gnu --help=recursive +- elif test -f $ac_srcdir/configure; then +- echo +- $SHELL $ac_srcdir/configure --help=recursive +- elif test -f $ac_srcdir/configure.ac || +- test -f $ac_srcdir/configure.in; then +- echo +- $ac_configure --help ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 +- fi +- cd $ac_popdir ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } + done + fi + +-test -n "$ac_init_help" && exit 0 ++test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF + libusb configure 0.1.12 +-generated by GNU Autoconf 2.59 ++generated by GNU Autoconf 2.61 + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF +- exit 0 ++ exit + fi +-exec 5>config.log +-cat >&5 <<_ACEOF ++cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by libusb $as_me 0.1.12, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + $ $0 $@ + + _ACEOF ++exec 5>>config.log + { + cat <<_ASUNAME + ## --------- ## +@@ -1197,7 +1640,7 @@ + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +-hostinfo = `(hostinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +@@ -1211,6 +1654,7 @@ + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" + done ++IFS=$as_save_IFS + + } >&5 + +@@ -1232,7 +1676,6 @@ + ac_configure_args= + ac_configure_args0= + ac_configure_args1= +-ac_sep= + ac_must_keep_next=false + for ac_pass in 1 2 + do +@@ -1243,7 +1686,7 @@ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ++ *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in +@@ -1265,9 +1708,7 @@ + -* ) ac_must_keep_next=true ;; + esac + fi +- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" +- # Get rid of the leading space. +- ac_sep=" " ++ ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +@@ -1278,8 +1719,8 @@ + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there + # would cause problems or look ugly. +-# WARNING: Be sure not to use single quotes in there, as some shells, +-# such as our DU 5.0 friend, will then `close' the trap. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. + trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { +@@ -1292,20 +1733,34 @@ + _ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done + (set) 2>&1 | +- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + sed -n \ +- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" +- ;; ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( + *) +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} ++ esac | ++ sort ++) + echo + + cat <<\_ASBOX +@@ -1316,22 +1771,28 @@ + echo + for ac_var in $ac_subst_vars + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +-## ------------- ## +-## Output files. ## +-## ------------- ## ++## ------------------- ## ++## File substitutions. ## ++## ------------------- ## + _ASBOX + echo + for ac_var in $ac_subst_files + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi +@@ -1343,26 +1804,24 @@ + ## ----------- ## + _ASBOX + echo +- sed "/^$/d" confdefs.h | sort ++ cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 +- rm -f core *.core && +- rm -rf conftest* confdefs* conf$$* $ac_clean_files && ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +- ' 0 ++' 0 + for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. +-rm -rf conftest* confdefs.h +-# AIX cpp loses on an empty file, so make sure it contains at least a newline. +-echo >confdefs.h ++rm -f -r conftest* confdefs.h + + # Predefined preprocessor variables. + +@@ -1393,14 +1852,17 @@ + + # Let the site file select an alternate cache file if it wants to. + # Prefer explicitly selected file to automatically selected ones. +-if test -z "$CONFIG_SITE"; then +- if test "x$prefix" != xNONE; then +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" +- else +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +- fi ++if test -n "$CONFIG_SITE"; then ++ set x "$CONFIG_SITE" ++elif test "x$prefix" != xNONE; then ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" ++else ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" + fi +-for ac_site_file in $CONFIG_SITE; do ++shift ++for ac_site_file ++do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 + echo "$as_me: loading site script $ac_site_file" >&6;} +@@ -1416,8 +1878,8 @@ + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 + echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in +- [\\/]* | ?:[\\/]* ) . $cache_file;; +- *) . ./$cache_file;; ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; + esac + fi + else +@@ -1429,12 +1891,11 @@ + # Check that the precious variables saved in the cache have kept the same + # value. + ac_cache_corrupted=false +-for ac_var in `(set) 2>&1 | +- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do ++for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set +- eval ac_old_val="\$ac_cv_env_${ac_var}_value" +- eval ac_new_val="\$ac_env_${ac_var}_value" ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +@@ -1459,8 +1920,7 @@ + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) +- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in +@@ -1477,12 +1937,6 @@ + { (exit 1); exit 1; }; } + fi + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- + + + +@@ -1507,6 +1961,11 @@ + + + ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +@@ -1517,31 +1976,38 @@ + # Save this value here, since automake will set cflags later + cflags_set=${CFLAGS+set} + +-am__api_version="1.8" ++am__api_version='1.10' ++ + ac_aux_dir= +-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +- if test -f $ac_dir/install-sh; then ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break +- elif test -f $ac_dir/install.sh; then ++ elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break +- elif test -f $ac_dir/shtool; then ++ elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi + done + if test -z "$ac_aux_dir"; then +- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } + fi +-ac_config_guess="$SHELL $ac_aux_dir/config.guess" +-ac_config_sub="$SHELL $ac_aux_dir/config.sub" +-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ + + # Find a good install program. We prefer a C program (faster), + # so one script is as good as another. But avoid the broken or +@@ -1556,8 +2022,8 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -1579,7 +2045,7 @@ + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -1598,21 +2064,22 @@ + ;; + esac + done ++IFS=$as_save_IFS + + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -1622,8 +2089,8 @@ + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +-echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } + # Just in case + sleep 1 + echo timestamp > conftest.file +@@ -1665,20 +2132,20 @@ + Check your system clock" >&2;} + { (exit 1); exit 1; }; } + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + test "$program_prefix" != NONE && +- program_transform_name="s,^,$program_prefix,;$program_transform_name" ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" + # Use a double $ so make ignores it. + test "$program_suffix" != NONE && +- program_transform_name="s,\$,$program_suffix,;$program_transform_name" ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" + # Double any \ or $. echo might interpret backslashes. + # By default was `s,x,x', remove it if useless. + cat <<\_ACEOF >conftest.sed + s/[\\$]/&&/g;s/;s,x,x,$// + _ACEOF + program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +-rm conftest.sed ++rm -f conftest.sed + + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` +@@ -1693,37 +2160,60 @@ + echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + fi + +-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then +- # Keeping the `.' argument allows $(mkdir_p) to be used without +- # argument. Indeed, we sometimes output rules like +- # $(mkdir_p) $(somedir) +- # where $(somedir) is conditionally defined. +- # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more +- # expensive solution, as it forces Make to start a sub-shell.) +- mkdir_p='mkdir -p -- .' +-else +- # On NextStep and OpenStep, the `mkdir' command does not +- # recognize any option. It will interpret all options as +- # directories to create, and then abort because `.' already +- # exists. +- for d in ./-p ./--version; +- do +- test -d $d && rmdir $d +- done +- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. +- if test -f "$ac_aux_dir/mkinstalldirs"; then +- mkdir_p='$(mkinstalldirs)' ++{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 ++echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } ++if test -z "$MKDIR_P"; then ++ if test "${ac_cv_path_mkdir+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in mkdir gmkdir; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue ++ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( ++ 'mkdir (GNU coreutils) '* | \ ++ 'mkdir (coreutils) '* | \ ++ 'mkdir (fileutils) '4.1*) ++ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext ++ break 3;; ++ esac ++ done ++ done ++done ++IFS=$as_save_IFS ++ ++fi ++ ++ if test "${ac_cv_path_mkdir+set}" = set; then ++ MKDIR_P="$ac_cv_path_mkdir -p" + else +- mkdir_p='$(install_sh) -d' ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for MKDIR_P within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ test -d ./--version && rmdir ./--version ++ MKDIR_P="$ac_install_sh -d" + fi + fi ++{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 ++echo "${ECHO_T}$MKDIR_P" >&6; } ++ ++mkdir_p="$MKDIR_P" ++case $mkdir_p in ++ [\\/$]* | ?:[\\/]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac + + for ac_prog in gawk mawk nawk awk + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_AWK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1736,54 +2226,57 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + AWK=$ac_cv_prog_AWK + if test -n "$AWK"; then +- echo "$as_me:$LINENO: result: $AWK" >&5 +-echo "${ECHO_T}$AWK" >&6 ++ { echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$AWK" && break + done + +-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh + all: +- @echo 'ac_maketemp="$(MAKE)"' ++ @echo '@@@%%%=$(MAKE)=@@@%%%' + _ACEOF + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. +-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +-if test -n "$ac_maketemp"; then +- eval ac_cv_prog_make_${ac_make}_set=yes +-else +- eval ac_cv_prog_make_${ac_make}_set=no +-fi ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac + rm -f conftest.make + fi +-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + SET_MAKE= + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" + fi + +@@ -1796,12 +2289,16 @@ + fi + rmdir .tst 2>/dev/null + +-# test to see if srcdir already configured +-if test "`cd $srcdir && pwd`" != "`pwd`" && +- test -f $srcdir/config.status; then +- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ am__isrc=' -I$(srcdir)' ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 + echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } ++ fi + fi + + # test whether we have cygpath +@@ -1844,10 +2341,7 @@ + + MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +- +-AMTAR=${AMTAR-"${am_missing_run}tar"} +- +-install_sh=${install_sh-"$am_aux_dir/install-sh"} ++install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} + + # Installed binaries are usually stripped using `strip' when the user + # run `make install-strip'. However `strip' might not be the right +@@ -1857,8 +2351,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1871,32 +2365,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1909,40 +2405,83 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" + fi + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- STRIP=$ac_ct_STRIP ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi + else + STRIP="$ac_cv_prog_STRIP" + fi + + fi +-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. ++# Always define AMTAR for backward compatibility. ++ ++AMTAR=${AMTAR-"${am_missing_run}tar"} ++ ++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + ++ ++{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 ++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } ++ # Check whether --enable-maintainer-mode was given. ++if test "${enable_maintainer_mode+set}" = set; then ++ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval ++else ++ USE_MAINTAINER_MODE=no ++fi ++ ++ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 ++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } ++ if test $USE_MAINTAINER_MODE = yes; then ++ MAINTAINER_MODE_TRUE= ++ MAINTAINER_MODE_FALSE='#' ++else ++ MAINTAINER_MODE_TRUE='#' ++ MAINTAINER_MODE_FALSE= ++fi ++ ++ MAINT=$MAINTAINER_MODE_TRUE ++ ++ ++ + LIBUSB_VERSION=$VERSION + + # +@@ -2006,13 +2545,12 @@ + + + +- ac_config_headers="$ac_config_headers config.h" ++ac_config_headers="$ac_config_headers config.h" + + +-# Check whether --enable-shared or --disable-shared was given. ++# Check whether --enable-shared was given. + if test "${enable_shared+set}" = set; then +- enableval="$enable_shared" +- p=${PACKAGE-default} ++ enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; +@@ -2031,12 +2569,12 @@ + esac + else + enable_shared=yes +-fi; ++fi ++ + +-# Check whether --enable-static or --disable-static was given. ++# Check whether --enable-static was given. + if test "${enable_static+set}" = set; then +- enableval="$enable_static" +- p=${PACKAGE-default} ++ enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; +@@ -2055,12 +2593,12 @@ + esac + else + enable_static=yes +-fi; ++fi ++ + +-# Check whether --enable-fast-install or --disable-fast-install was given. ++# Check whether --enable-fast-install was given. + if test "${enable_fast_install+set}" = set; then +- enableval="$enable_fast_install" +- p=${PACKAGE-default} ++ enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; +@@ -2079,65 +2617,95 @@ + esac + else + enable_fast_install=yes +-fi; ++fi ++ + + # Make sure we can run config.sub. +-$ac_config_sub sun4 >/dev/null 2>&1 || +- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +-echo "$as_me: error: cannot run $ac_config_sub" >&2;} ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +-echo "$as_me:$LINENO: checking build system type" >&5 +-echo $ECHO_N "checking build system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } + if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_build_alias=$build_alias +-test -z "$ac_cv_build_alias" && +- ac_cv_build_alias=`$ac_config_guess` +-test -z "$ac_cv_build_alias" && ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 + echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + + fi +-echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +-echo "${ECHO_T}$ac_cv_build" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + build=$ac_cv_build +-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +-echo "$as_me:$LINENO: checking host system type" >&5 +-echo $ECHO_N "checking host system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } + if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_host_alias=$host_alias +-test -z "$ac_cv_host_alias" && +- ac_cv_host_alias=$ac_cv_build_alias +-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +-echo "${ECHO_T}$ac_cv_host" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + host=$ac_cv_host +-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + + DEPDIR="${am__leading_dot}deps" + +- ac_config_commands="$ac_config_commands depfiles" ++ac_config_commands="$ac_config_commands depfiles" + + + am_make=${MAKE-make} +@@ -2147,8 +2715,8 @@ + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } + am__include="#" + am__quote= + _am_result=none +@@ -2175,22 +2743,20 @@ + fi + + +-echo "$as_me:$LINENO: result: $_am_result" >&5 +-echo "${ECHO_T}$_am_result" >&6 ++{ echo "$as_me:$LINENO: result: $_am_result" >&5 ++echo "${ECHO_T}$_am_result" >&6; } + rm -f confinc confmf + +-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. ++# Check whether --enable-dependency-tracking was given. + if test "${enable_dependency_tracking+set}" = set; then +- enableval="$enable_dependency_tracking" ++ enableval=$enable_dependency_tracking; ++fi + +-fi; + if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + fi +- +- +-if test "x$enable_dependency_tracking" != xno; then ++ if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' + else +@@ -2199,7 +2765,6 @@ + fi + + +- + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -2208,8 +2773,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2222,32 +2787,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2260,36 +2827,51 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + else + CC="$ac_cv_prog_CC" + fi + + if test -z "$CC"; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2302,74 +2884,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- +-fi +-if test -z "$ac_cv_prog_CC"; then +- ac_ct_CC=$CC +- # Extract the first word of "cc", so it can be a program name with args. +-set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_CC"; then +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +- +-fi +-fi +-ac_ct_CC=$ac_cv_prog_ac_ct_CC +-if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC +-else +- CC="$ac_cv_prog_CC" +-fi + ++ fi + fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2383,7 +2925,7 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue +@@ -2394,6 +2936,7 @@ + fi + done + done ++IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. +@@ -2411,22 +2954,23 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2439,36 +2983,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$CC" && break + done + fi + if test -z "$CC"; then + ac_ct_CC=$CC +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2481,29 +3027,45 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_CC" && break + done + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + fi + + fi +@@ -2516,21 +3078,35 @@ + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C compiler version" >&5 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +@@ -2555,47 +3131,77 @@ + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } + ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 +- (eval $ac_link_default) 2>&5 ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { (ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link_default") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- # Find the output, starting from the most likely. This scheme is +-# not robust to junk in `.', hence go to wildcards (a.*) only as a last +-# resort. +- +-# Be careful to initialize this variable, since it used to be cached. +-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +-ac_cv_exeext= +-# b.out is created by i960 compilers. +-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) +- ;; +- conftest.$ac_ext ) +- # This is the source file. ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) +- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- # FIXME: I believe we export ac_cv_exeext for Libtool, +- # but it would be cool to find out if it's true. Does anybody +- # maintain Libtool? --akim. +- export ac_cv_exeext ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. + break;; + * ) + break;; + esac + done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ + else ++ ac_file='' ++fi ++ ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } ++if test -z "$ac_file"; then + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +@@ -2607,19 +3213,21 @@ + fi + + ac_exeext=$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_file" >&5 +-echo "${ECHO_T}$ac_file" >&6 + +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -2638,22 +3246,27 @@ + fi + fi + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + + rm -f a.out a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-echo "${ECHO_T}$cross_compiling" >&6 +- +-echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +@@ -2664,9 +3277,8 @@ + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- export ac_cv_exeext + break;; + * ) break;; + esac +@@ -2680,14 +3292,14 @@ + fi + + rm -f conftest$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-echo "${ECHO_T}$ac_cv_exeext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } + if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2707,14 +3319,20 @@ + } + _ACEOF + rm -f conftest.o conftest.obj +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +@@ -2732,12 +3350,12 @@ + + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-echo "${ECHO_T}$ac_cv_objext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2760,50 +3378,49 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } + GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-CFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -2819,311 +3436,248 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cc_g=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +-if test "$ac_test_CFLAGS" = set; then +- CFLAGS=$ac_save_CFLAGS +-elif test $ac_cv_prog_cc_g = yes; then +- if test "$GCC" = yes; then +- CFLAGS="-g -O2" +- else +- CFLAGS="-g" +- fi +-else +- if test "$GCC" = yes; then +- CFLAGS="-O2" +- else +- CFLAGS= +- fi +-fi +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_cv_prog_cc_stdc=no +-ac_save_CC=$CC +-cat >conftest.$ac_ext <<_ACEOF ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include +-#include +-#include +-#include +-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +-struct buf { int x; }; +-FILE * (*rcsopen) (struct buf *, struct stat *, int); +-static char *e (p, i) +- char **p; +- int i; +-{ +- return p[i]; +-} +-static char *f (char * (*g) (char **, int), char **p, ...) ++ ++int ++main () + { +- char *s; +- va_list v; +- va_start (v,p); +- s = g (p, va_arg (v,int)); +- va_end (v); +- return s; +-} + +-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has +- function prototypes and stuff, but not '\xHH' hex character constants. +- These don't provoke an error unfortunately, instead are silently treated +- as 'x'. The following induces an error, until -std1 is added to get +- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an +- array size at least. It's necessary to write '\x00'==0 to get something +- that's true only with -std1. */ +-int osf4_cc_array ['\x00' == 0 ? 1 : -1]; +- +-int test (int i, double x); +-struct s1 {int (*f) (int a);}; +-struct s2 {int (*f) (double a);}; +-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +-int argc; +-char **argv; +-int +-main () +-{ +-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; + } + _ACEOF +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX 10.20 and later -Ae +-# HP-UX older versions -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +-do +- CC="$ac_save_CC $ac_arg" +- rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_prog_cc_stdc=$ac_arg +-break ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ : + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext +-done +-rm -f conftest.$ac_ext conftest.$ac_objext +-CC=$ac_save_CC +- +-fi +- +-case "x$ac_cv_prog_cc_stdc" in +- x|xno) +- echo "$as_me:$LINENO: result: none needed" >&5 +-echo "${ECHO_T}none needed" >&6 ;; +- *) +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 +- CC="$CC $ac_cv_prog_cc_stdc" ;; +-esac +- +-# Some people use a C++ compiler to compile C. Since we use `exit', +-# in C++ we need to declare it. In case someone uses the same compiler +-# for both compiling C and C++ we need to have the C++ compiler decide +-# the declaration of exit, since it's the most demanding environment. +-cat >conftest.$ac_ext <<_ACEOF +-#ifndef __cplusplus +- choke me +-#endif +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_declaration +-#include ++ + int + main () + { +-exit (42); ++ + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-continue ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } ++if test "$ac_test_CFLAGS" = set; then ++ CFLAGS=$ac_save_CFLAGS ++elif test $ac_cv_prog_cc_g = yes; then ++ if test "$GCC" = yes; then ++ CFLAGS="-g -O2" ++ else ++ CFLAGS="-g" ++ fi ++else ++ if test "$GCC" = yes; then ++ CFLAGS="-O2" ++ else ++ CFLAGS= ++ fi ++fi ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_prog_cc_c89=no ++ac_save_CC=$CC ++cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_declaration ++#include ++#include ++#include ++#include ++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ ++struct buf { int x; }; ++FILE * (*rcsopen) (struct buf *, struct stat *, int); ++static char *e (p, i) ++ char **p; ++ int i; ++{ ++ return p[i]; ++} ++static char *f (char * (*g) (char **, int), char **p, ...) ++{ ++ char *s; ++ va_list v; ++ va_start (v,p); ++ s = g (p, va_arg (v,int)); ++ va_end (v); ++ return s; ++} ++ ++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has ++ function prototypes and stuff, but not '\xHH' hex character constants. ++ These don't provoke an error unfortunately, instead are silently treated ++ as 'x'. The following induces an error, until -std is added to get ++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an ++ array size at least. It's necessary to write '\x00'==0 to get something ++ that's true only with -std. */ ++int osf4_cc_array ['\x00' == 0 ? 1 : -1]; ++ ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ ++int test (int i, double x); ++struct s1 {int (*f) (int a);}; ++struct s2 {int (*f) (double a);}; ++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); ++int argc; ++char **argv; + int + main () + { +-exit (42); ++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++do ++ CC="$ac_save_CC $ac_arg" ++ rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- break ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_c89=$ac_arg + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break + done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h ++rm -f conftest.$ac_ext ++CC=$ac_save_CC ++ + fi ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; ++ xno) ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; ++ *) ++ CC="$CC $ac_cv_prog_cc_c89" ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; ++esac + +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -3132,8 +3686,8 @@ + + depcc="$CC" am_compiler_list= + +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3197,13 +3751,19 @@ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings +- # (even with -Werror). So we grep stderr for any message +- # that says an option was ignored. +- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi +@@ -3217,13 +3777,11 @@ + fi + + fi +-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + +- +- +-if ++ if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= +@@ -3234,8 +3792,8 @@ + fi + + +-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } + if test "${lt_cv_path_SED+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3248,18 +3806,19 @@ + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done + done ++IFS=$as_save_IFS + lt_ac_max=0 + lt_ac_count=0 + # Add /usr/xpg4/bin/sed as it is typically found on Solaris + # along with /bin/sed that truncates output. + for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && break ++ test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in +@@ -3284,41 +3843,189 @@ + fi + done + done ++ ++fi ++ + SED=$lt_cv_path_SED + ++{ echo "$as_me:$LINENO: result: $SED" >&5 ++echo "${ECHO_T}$SED" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_GREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_GREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++ + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" + +-echo "$as_me:$LINENO: result: $SED" >&5 +-echo "${ECHO_T}$SED" >&6 + +-echo "$as_me:$LINENO: checking for egrep" >&5 +-echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +-if test "${ac_cv_prog_egrep+set}" = set; then ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' ++ ac_path_EGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_EGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_EGREP=$EGREP + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +-echo "${ECHO_T}$ac_cv_prog_egrep" >&6 +- EGREP=$ac_cv_prog_egrep ++ ++ ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" + + + +-# Check whether --with-gnu-ld or --without-gnu-ld was given. ++# Check whether --with-gnu-ld was given. + if test "${with_gnu_ld+set}" = set; then +- withval="$with_gnu_ld" +- test "$withval" = no || with_gnu_ld=yes ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no +-fi; ++fi ++ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -3347,11 +4054,11 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- echo "$as_me:$LINENO: checking for GNU ld" >&5 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } + else +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } + fi + if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -3364,7 +4071,7 @@ + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some GNU ld's only accept -v. ++ # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +-echo "${ECHO_T}$LD" >&6 ++ { echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 + echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } + if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- # I'd rather use --version here, but apparently some GNU ld's only accept -v. ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. + case `$LD -v 2>&1 &5 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + + +-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_ld_reload_flag='-r' + fi +-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } + reload_flag=$lt_cv_ld_reload_flag + case $reload_flag in + "" | " "*) ;; + *) reload_flag=" $reload_flag" ;; + esac + reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' ++ else ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' ++ fi ++ ;; ++esac + +-echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 +-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 ++echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; } + if test "${lt_cv_path_NM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3438,56 +4154,63 @@ + # Let the user override the test. + lt_cv_path_NM="$NM" + else +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- tmp_nm="$ac_dir/${ac_tool_prefix}nm" +- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in +- */dev/null* | *'Invalid file or object type'*) +- lt_cv_path_NM="$tmp_nm -B" +- break +- ;; +- *) +- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in +- */dev/null*) +- lt_cv_path_NM="$tmp_nm -p" ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac + ;; + esac +- esac +- fi ++ fi ++ done ++ IFS="$lt_save_ifs" + done +- IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + fi + fi +-echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +-echo "${ECHO_T}$lt_cv_path_NM" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; } + NM="$lt_cv_path_NM" + +-echo "$as_me:$LINENO: checking whether ln -s works" >&5 +-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } + LN_S=$as_ln_s + if test "$LN_S" = "ln -s"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +-echo "${ECHO_T}no, using $LN_S" >&6 ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } + fi + +-echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 +-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 ++echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } + if test "${lt_cv_deplibs_check_method+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3506,7 +4229,7 @@ + # whether `pass_all' will *always* work, you probably want this one. + + case $host_os in +-aix4* | aix5*) ++aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +@@ -3514,7 +4237,7 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-bsdi4*) ++bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so +@@ -3528,22 +4251,28 @@ + + mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by +- # func_win32_libid shell function, so use a weaker test based on 'objdump'. +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' +- lt_cv_file_magic_cmd='$OBJDUMP -f' ++ # func_win32_libid shell function, so use a weaker test based on 'objdump', ++ # unless we find 'file', for example because we are cross-compiling. ++ if ( file / ) >/dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi + ;; + + darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +-freebsd* | kfreebsd*-gnu) ++freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; +@@ -3559,7 +4288,7 @@ + + hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file +- case "$host_cpu" in ++ case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so +@@ -3575,6 +4304,11 @@ + esac + ;; + ++interix[3-9]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ++ ;; ++ + irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; +@@ -3586,20 +4320,11 @@ + ;; + + # This must be Linux ELF. +-linux*) +- case $host_cpu in +- alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*) +- lt_cv_deplibs_check_method=pass_all ;; +- *) +- # glibc up to 2.1.1 does not perform some relocations on ARM +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; +- esac +- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ++linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) ++netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else +@@ -3618,12 +4343,10 @@ + ;; + + openbsd*) +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else +- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +@@ -3631,7 +4354,7 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-sco3.2v5*) ++rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +@@ -3639,7 +4362,7 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' +@@ -3660,17 +4383,20 @@ + siemens) + lt_cv_deplibs_check_method=pass_all + ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + esac + ;; + +-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*) ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + esac + + fi +-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -3681,15 +4407,18 @@ + # If no C compiler was specified, use CC. + LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ + # Allow CC to be a program name with arguments. + compiler=$CC + + +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given. ++# Check whether --enable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then +- enableval="$enable_libtool_lock" ++ enableval=$enable_libtool_lock; ++fi + +-fi; + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + # Some flags need to be propagated to the compiler or linker for good +@@ -3716,7 +4445,7 @@ + ;; + *-*-irix6*) + # Find out which ABI we are using. +- echo '#line 3719 "configure"' > conftest.$ac_ext ++ echo '#line 4448 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +@@ -3751,7 +4480,8 @@ + rm -rf conftest* + ;; + +-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +@@ -3759,9 +4489,12 @@ + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- case "`/usr/bin/file conftest.o`" in ++ case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; +@@ -3778,6 +4511,9 @@ + ;; + *64-bit*) + case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; +@@ -3801,8 +4537,8 @@ + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" +- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } + if test "${lt_cv_cc_needs_belf+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3828,35 +4564,32 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + lt_cv_cc_needs_belf=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-lt_cv_cc_needs_belf=no ++ lt_cv_cc_needs_belf=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -3865,13 +4598,37 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ + + esac + +@@ -3883,8 +4640,8 @@ + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= +@@ -3918,24 +4675,22 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else + echo "$as_me: failed program was:" >&5 +@@ -3944,9 +4699,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -3956,24 +4712,22 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +@@ -3984,6 +4738,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -4001,8 +4756,8 @@ + else + ac_cv_prog_CPP=$CPP + fi +-echo "$as_me:$LINENO: result: $CPP" >&5 +-echo "${ECHO_T}$CPP" >&6 ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do +@@ -4025,24 +4780,22 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else + echo "$as_me: failed program was:" >&5 +@@ -4051,9 +4804,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -4063,24 +4817,22 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +@@ -4091,6 +4843,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -4113,8 +4866,8 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } + if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4138,35 +4891,31 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_header_stdc=no ++ ac_cv_header_stdc=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +@@ -4222,6 +4971,7 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include ++#include + #if ((' ' & 0x0FF) == 0x020) + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +@@ -4241,18 +4991,27 @@ + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) +- exit(2); +- exit (0); ++ return 2; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -4265,12 +5024,14 @@ + ( exit $ac_status ) + ac_cv_header_stdc=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -4293,9 +5054,9 @@ + inttypes.h stdint.h unistd.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -4309,38 +5070,35 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_Header=no" ++ eval "$as_ac_Header=no" + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +@@ -4355,18 +5113,19 @@ + for ac_header in dlfcn.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -4377,41 +5136,37 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -4420,24 +5175,22 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -4445,9 +5198,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -4471,25 +5225,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## --------------------------------- ## +-## Report this to the libusb lists. ## +-## --------------------------------- ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -4501,18 +5249,22 @@ + + done + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-if test -n "$ac_tool_prefix"; then +- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ++if test -z "$CXX"; then ++ if test -n "$CCC"; then ++ CXX=$CCC ++ else ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4525,36 +5277,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CXX=$ac_cv_prog_CXX + if test -n "$CXX"; then +- echo "$as_me:$LINENO: result: $CXX" >&5 +-echo "${ECHO_T}$CXX" >&6 ++ { echo "$as_me:$LINENO: result: $CXX" >&5 ++echo "${ECHO_T}$CXX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$CXX" && break + done + fi + if test -z "$CXX"; then + ac_ct_CXX=$CXX +- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4567,55 +5321,85 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CXX="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CXX=$ac_cv_prog_ac_ct_CXX + if test -n "$ac_ct_CXX"; then +- echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +-echo "${ECHO_T}$ac_ct_CXX" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 ++echo "${ECHO_T}$ac_ct_CXX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_CXX" && break + done +-test -n "$ac_ct_CXX" || ac_ct_CXX="g++" + +- CXX=$ac_ct_CXX ++ if test "x$ac_ct_CXX" = x; then ++ CXX="g++" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CXX=$ac_ct_CXX ++ fi + fi + +- ++ fi ++fi + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C++ compiler version" >&5 ++echo "$as_me:$LINENO: checking for C++ compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +-echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; } + if test "${ac_cv_cxx_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4638,50 +5422,49 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; } + GXX=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CXXFLAGS=${CXXFLAGS+set} + ac_save_CXXFLAGS=$CXXFLAGS +-CXXFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 ++echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cxx_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_cxx_werror_flag=$ac_cxx_werror_flag ++ ac_cxx_werror_flag=yes ++ ac_cv_prog_cxx_g=no ++ CXXFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -4697,160 +5480,134 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_prog_cxx_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cxx_g=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 +-if test "$ac_test_CXXFLAGS" = set; then +- CXXFLAGS=$ac_save_CXXFLAGS +-elif test $ac_cv_prog_cxx_g = yes; then +- if test "$GXX" = yes; then +- CXXFLAGS="-g -O2" +- else +- CXXFLAGS="-g" +- fi +-else +- if test "$GXX" = yes; then +- CXXFLAGS="-O2" +- else +- CXXFLAGS= +- fi +-fi +-for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF ++ CXXFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_declaration +-#include ++ + int + main () + { +-exit (42); ++ + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + : + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-continue +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++ CXXFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_declaration ++ + int + main () + { +-exit (42); ++ + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- break ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cxx_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + +-ac_ext=cc ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; } ++if test "$ac_test_CXXFLAGS" = set; then ++ CXXFLAGS=$ac_save_CXXFLAGS ++elif test $ac_cv_prog_cxx_g = yes; then ++ if test "$GXX" = yes; then ++ CXXFLAGS="-g -O2" ++ else ++ CXXFLAGS="-g" ++ fi ++else ++ if test "$GXX" = yes; then ++ CXXFLAGS="-O2" ++ else ++ CXXFLAGS= ++ fi ++fi ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -4858,8 +5615,8 @@ + + depcc="$CXX" am_compiler_list= + +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4923,13 +5680,19 @@ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings +- # (even with -Werror). So we grep stderr for any message +- # that says an option was ignored. +- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CXX_dependencies_compiler_type=$depmode + break + fi +@@ -4943,13 +5706,11 @@ + fi + + fi +-echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6 ++{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; } + CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + +- +- +-if ++ if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then + am__fastdepCXX_TRUE= +@@ -4960,13 +5721,18 @@ + fi + + +-ac_ext=cc ++ ++ ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 ++echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; } + if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -4996,24 +5762,22 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else + echo "$as_me: failed program was:" >&5 +@@ -5022,9 +5786,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5034,24 +5799,22 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +@@ -5062,6 +5825,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -5079,8 +5843,8 @@ + else + ac_cv_prog_CXXCPP=$CXXCPP + fi +-echo "$as_me:$LINENO: result: $CXXCPP" >&5 +-echo "${ECHO_T}$CXXCPP" >&6 ++{ echo "$as_me:$LINENO: result: $CXXCPP" >&5 ++echo "${ECHO_T}$CXXCPP" >&6; } + ac_preproc_ok=false + for ac_cxx_preproc_warn_flag in '' yes + do +@@ -5103,24 +5867,22 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else + echo "$as_me: failed program was:" >&5 +@@ -5129,9 +5891,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5141,24 +5904,22 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +@@ -5169,6 +5930,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -5184,24 +5946,26 @@ + { (exit 1); exit 1; }; } + fi + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + ++fi ++ + + ac_ext=f + ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' + ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_f77_compiler_gnu + if test -n "$ac_tool_prefix"; then +- for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran ++ for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5214,36 +5978,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_F77="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + F77=$ac_cv_prog_F77 + if test -n "$F77"; then +- echo "$as_me:$LINENO: result: $F77" >&5 +-echo "${ECHO_T}$F77" >&6 ++ { echo "$as_me:$LINENO: result: $F77" >&5 ++echo "${ECHO_T}$F77" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$F77" && break + done + fi + if test -z "$F77"; then + ac_ct_F77=$F77 +- for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran ++ for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5256,48 +6022,78 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_F77="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_F77=$ac_cv_prog_ac_ct_F77 + if test -n "$ac_ct_F77"; then +- echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 +-echo "${ECHO_T}$ac_ct_F77" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 ++echo "${ECHO_T}$ac_ct_F77" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_F77" && break + done + +- F77=$ac_ct_F77 ++ if test "x$ac_ct_F77" = x; then ++ F77="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ F77=$ac_ct_F77 ++ fi + fi + + + # Provide some information about the compiler. +-echo "$as_me:5286:" \ +- "checking for Fortran 77 compiler version" >&5 ++echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +@@ -5307,8 +6103,8 @@ + # input file. (Note that this only needs to work for GNU compilers.) + ac_save_ext=$ac_ext + ac_ext=F +-echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; } + if test "${ac_cv_f77_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5321,46 +6117,42 @@ + end + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_f77_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_f77_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; } + ac_ext=$ac_save_ext + ac_test_FFLAGS=${FFLAGS+set} + ac_save_FFLAGS=$FFLAGS + FFLAGS= +-echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 +-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 ++echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_f77_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5371,39 +6163,35 @@ + end + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_f77_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_prog_f77_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_f77_g=no ++ ac_cv_prog_f77_g=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; } + if test "$ac_test_FFLAGS" = set; then + FFLAGS=$ac_save_FFLAGS + elif test $ac_cv_prog_f77_g = yes; then +@@ -5430,10 +6218,9 @@ + + + # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +- + # find the maximum length of command line arguments +-echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } + if test "${lt_cv_sys_max_cmd_len+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5473,43 +6260,91 @@ + lt_cv_sys_max_cmd_len=8192; + ;; + +- *) +- # If test is not a shell built-in, we'll probably end up computing a +- # maximum length that is only half of the actual maximum length, but +- # we can't tell. +- while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && +- new_result=`expr "X$teststring" : ".*" 2>&1` && +- lt_cv_sys_max_cmd_len=$new_result && +- test $i != 17 # 1/2 MB should be enough +- do +- i=`expr $i + 1` +- teststring=$teststring$teststring +- done +- teststring= +- # Add a significant safety factor because C++ compilers can tack on massive +- # amounts of additional arguments before passing them to the linker. +- # It appears as though 1/2 is a usable value. +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ new_result=`expr "X$teststring" : ".*" 2>&1` && ++ lt_cv_sys_max_cmd_len=$new_result && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on massive ++ # amounts of additional arguments before passing them to the linker. ++ # It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi + ;; + esac + + fi + + if test -n $lt_cv_sys_max_cmd_len ; then +- echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } + else +- echo "$as_me:$LINENO: result: none" >&5 +-echo "${ECHO_T}none" >&6 ++ { echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6; } + fi + + + + ++ + # Check for command to grab the raw symbol name followed by C symbol from nm. +-echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } + if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5523,9 +6358,6 @@ + # Regexp to match symbols that can be accessed directly from C. + sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +-# Transform the above into a raw symbol and a C symbol. +-symxfrm='\1 \2\3 \3' +- + # Transform an extracted symbol line into a proper C declaration + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +@@ -5547,15 +6379,31 @@ + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; ++linux* | k*bsd*-gnu) ++ if test "$host_cpu" = ia64; then ++ symcode='[ABCDGIRSTW]' ++ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++ fi ++ ;; + irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; + osf*) + symcode='[BCDEGQRST]' + ;; +-solaris* | sysv5*) ++solaris*) + symcode='[BDRT]' + ;; ++sco3.2v5*) ++ symcode='[DT]' ++ ;; ++sysv4.2uw2*) ++ symcode='[DT]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[ABDT]' ++ ;; + sysv4) + symcode='[DFNSTU]' + ;; +@@ -5578,8 +6426,11 @@ + # Try without a prefix undercore, then with it. + for ac_symprfx in "" "_"; do + ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" ++ + # Write the raw and C identifiers. +- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -5681,7 +6532,7 @@ + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi +- rm -f conftest* conftst* ++ rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then +@@ -5697,15 +6548,15 @@ + lt_cv_sys_global_symbol_to_cdecl= + fi + if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- echo "$as_me:$LINENO: result: failed" >&5 +-echo "${ECHO_T}failed" >&6 ++ { echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6; } + else +- echo "$as_me:$LINENO: result: ok" >&5 +-echo "${ECHO_T}ok" >&6 ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } + fi + +-echo "$as_me:$LINENO: checking for objdir" >&5 +-echo $ECHO_N "checking for objdir... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } + if test "${lt_cv_objdir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5719,8 +6570,8 @@ + fi + rmdir .libs 2>/dev/null + fi +-echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +-echo "${ECHO_T}$lt_cv_objdir" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6; } + objdir=$lt_cv_objdir + + +@@ -5741,7 +6592,7 @@ + + # Sed substitution that helps us do robust quoting. It backslashifies + # metacharacters that are still active within double-quoted strings. +-Xsed='sed -e s/^X//' ++Xsed='sed -e 1s/^X//' + sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + + # Same as above, but do not quote variable references. +@@ -5761,7 +6612,7 @@ + default_ofile=libtool + can_build_shared=yes + +-# All known linkers require a `.a' archive for static linking (except M$VC, ++# All known linkers require a `.a' archive for static linking (except MSVC, + # which needs '.lib'). + libext=a + ltmain="$ac_aux_dir/ltmain.sh" +@@ -5771,8 +6622,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. + set dummy ${ac_tool_prefix}ar; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5785,32 +6636,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + AR=$ac_cv_prog_AR + if test -n "$AR"; then +- echo "$as_me:$LINENO: result: $AR" >&5 +-echo "${ECHO_T}$AR" >&6 ++ { echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. + set dummy ar; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5823,27 +6676,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" + fi + fi + ac_ct_AR=$ac_cv_prog_ac_ct_AR + if test -n "$ac_ct_AR"; then +- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +-echo "${ECHO_T}$ac_ct_AR" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- AR=$ac_ct_AR ++ if test "x$ac_ct_AR" = x; then ++ AR="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ AR=$ac_ct_AR ++ fi + else + AR="$ac_cv_prog_AR" + fi +@@ -5851,8 +6718,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. + set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5865,32 +6732,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + RANLIB=$ac_cv_prog_RANLIB + if test -n "$RANLIB"; then +- echo "$as_me:$LINENO: result: $RANLIB" >&5 +-echo "${ECHO_T}$RANLIB" >&6 ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. + set dummy ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5903,27 +6772,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" + fi + fi + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB + if test -n "$ac_ct_RANLIB"; then +- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- RANLIB=$ac_ct_RANLIB ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ RANLIB=$ac_ct_RANLIB ++ fi + else + RANLIB="$ac_cv_prog_RANLIB" + fi +@@ -5931,8 +6814,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5945,32 +6828,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5983,27 +6868,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" + fi + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- STRIP=$ac_ct_STRIP ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi + else + STRIP="$ac_cv_prog_STRIP" + fi +@@ -6018,6 +6917,7 @@ + test -z "$AS" && AS=as + test -z "$CC" && CC=cc + test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS + test -z "$DLLTOOL" && DLLTOOL=dlltool + test -z "$LD" && LD=ld + test -z "$LN_S" && LN_S="ln -s" +@@ -6030,28 +6930,39 @@ + test -z "$ac_objext" && ac_objext=o + + # Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' + old_postinstall_cmds='chmod 644 $oldlib' + old_postuninstall_cmds= + + if test -n "$RANLIB"; then + case $host_os in + openbsd*) +- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) +- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + fi + ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ + # Only perform the check for file, if the check method requires it + case $deplibs_check_method in + file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6071,7 +6982,7 @@ + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then +@@ -6103,17 +7014,17 @@ + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6 ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then +- echo "$as_me:$LINENO: checking for file" >&5 +-echo $ECHO_N "checking for file... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; } + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6133,7 +7044,7 @@ + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then +@@ -6165,11 +7076,11 @@ + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6 ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + else +@@ -6181,24 +7092,336 @@ + ;; + esac + ++ ++ case $host_os in ++ rhapsody* | darwin*) ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_DSYMUTIL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$DSYMUTIL"; then ++ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++DSYMUTIL=$ac_cv_prog_DSYMUTIL ++if test -n "$DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 ++echo "${ECHO_T}$DSYMUTIL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DSYMUTIL"; then ++ ac_ct_DSYMUTIL=$DSYMUTIL ++ # Extract the first word of "dsymutil", so it can be a program name with args. ++set dummy dsymutil; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_DSYMUTIL"; then ++ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL ++if test -n "$ac_ct_DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 ++echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_DSYMUTIL" = x; then ++ DSYMUTIL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ DSYMUTIL=$ac_ct_DSYMUTIL ++ fi ++else ++ DSYMUTIL="$ac_cv_prog_DSYMUTIL" ++fi ++ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. ++set dummy ${ac_tool_prefix}nmedit; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_NMEDIT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$NMEDIT"; then ++ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++NMEDIT=$ac_cv_prog_NMEDIT ++if test -n "$NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $NMEDIT" >&5 ++echo "${ECHO_T}$NMEDIT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_NMEDIT"; then ++ ac_ct_NMEDIT=$NMEDIT ++ # Extract the first word of "nmedit", so it can be a program name with args. ++set dummy nmedit; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_NMEDIT"; then ++ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_NMEDIT="nmedit" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT ++if test -n "$ac_ct_NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 ++echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_NMEDIT" = x; then ++ NMEDIT=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ NMEDIT=$ac_ct_NMEDIT ++ fi ++else ++ NMEDIT="$ac_cv_prog_NMEDIT" ++fi ++ ++ ++ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 ++echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } ++if test "${lt_cv_apple_cc_single_mod+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ echo "int foo(void){return 1;}" > conftest.c ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib ${wl}-single_module conftest.c ++ if test -f libconftest.dylib; then ++ lt_cv_apple_cc_single_mod=yes ++ rm -rf libconftest.dylib* ++ fi ++ rm conftest.c ++ fi ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 ++echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } ++ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 ++echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } ++if test "${lt_cv_ld_exported_symbols_list+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_ld_exported_symbols_list=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ lt_cv_ld_exported_symbols_list=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 ++echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } ++ case $host_os in ++ rhapsody* | darwin1.[0123]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[91]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[012]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ esac ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil="~$DSYMUTIL \$lib || :" ++ else ++ _lt_dsymutil= ++ fi ++ ;; ++ esac ++ ++ + enable_dlopen=no + enable_win32_dll=no + +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given. ++# Check whether --enable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then +- enableval="$enable_libtool_lock" ++ enableval=$enable_libtool_lock; ++fi + +-fi; + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + +-# Check whether --with-pic or --without-pic was given. ++# Check whether --with-pic was given. + if test "${with_pic+set}" = set; then +- withval="$with_pic" +- pic_mode="$withval" ++ withval=$with_pic; pic_mode="$withval" + else + pic_mode=default +-fi; ++fi ++ + test -z "$pic_mode" && pic_mode=default + + # Use C for the default configuration in the libtool script +@@ -6219,77 +7442,34 @@ + objext=$objext + + # Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;\n" ++lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests +-lt_simple_link_test_code='int main(){return(0);}\n' ++lt_simple_link_test_code='int main(){return(0);}' + + + # If no C compiler was specified, use CC. + LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ + # Allow CC to be a program name with arguments. + compiler=$CC + + +-# +-# Check for any special shared library compilation flags. +-# +-lt_prog_cc_shlib= +-if test "$GCC" = no; then +- case $host_os in +- sco3.2v5*) +- lt_prog_cc_shlib='-belf' +- ;; +- esac +-fi +-if test -n "$lt_prog_cc_shlib"; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5 +-echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;} +- if echo "$old_CC $old_CFLAGS " | grep "[ ]$lt_prog_cc_shlib[ ]" >/dev/null; then : +- else +- { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 +-echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} +- lt_cv_prog_cc_can_build_shared=no +- fi +-fi +- +- +-# +-# Check to make sure the static flag actually works. +-# +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6 +-if test "${lt_prog_compiler_static_works+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_static_works=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_prog_compiler_static" +- printf "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&5 +- else +- lt_prog_compiler_static_works=yes +- fi +- fi +- $rm conftest* +- LDFLAGS="$save_LDFLAGS" +- +-fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 +- +-if test x"$lt_prog_compiler_static_works" = xyes; then +- : +-else +- lt_prog_compiler_static= +-fi +- ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm -r conftest* + + + +@@ -6299,14 +7479,14 @@ + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +-echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. +@@ -6314,26 +7494,28 @@ + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:6320: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:7500: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:6324: \$? = $ac_status" >&5 ++ echo "$as_me:7504: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +@@ -6347,8 +7529,8 @@ + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -6370,13 +7552,15 @@ + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + +- mingw* | pw32* | os2*) ++ mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + +@@ -6386,6 +7570,11 @@ + lt_prog_compiler_pic='-fno-common' + ;; + ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. +@@ -6402,7 +7591,7 @@ + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -6428,8 +7617,18 @@ + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic='-qnocommon' ++ lt_prog_compiler_wl='-Wl,' ++ ;; ++ esac ++ ;; + +- mingw* | pw32* | os2*) ++ mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' +@@ -6439,7 +7638,7 @@ + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -6462,19 +7661,42 @@ + lt_prog_compiler_static='-Bstatic' + ;; + +- linux*) +- case $CC in ++ linux* | k*bsd*-gnu) ++ case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-fpic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; +- esac ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='' ++ ;; ++ esac ++ ;; ++ esac + ;; + + osf3* | osf4* | osf5*) +@@ -6483,15 +7705,19 @@ + lt_prog_compiler_static='-non_shared' + ;; + +- sco3.2v5*) +- lt_prog_compiler_pic='-Kpic' +- lt_prog_compiler_static='-dn' ++ rdos*) ++ lt_prog_compiler_static='-non_shared' + ;; + + solaris*) +- lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl='-Wl,';; ++ esac + ;; + + sunos4*) +@@ -6500,7 +7726,7 @@ + lt_prog_compiler_static='-Bstatic' + ;; + +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' +@@ -6513,6 +7739,17 @@ + fi + ;; + ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' +@@ -6524,22 +7761,22 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 +-if test "${lt_prog_compiler_pic_works+set}" = set; then ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_pic_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- lt_prog_compiler_pic_works=no ++ lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. +@@ -6547,28 +7784,30 @@ + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:6553: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:7790: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:6557: \$? = $ac_status" >&5 ++ echo "$as_me:7794: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- lt_prog_compiler_pic_works=yes ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works=yes + fi + fi + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } + +-if test x"$lt_prog_compiler_pic_works" = xyes; then ++if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; +@@ -6579,7 +7818,7 @@ + fi + + fi +-case "$host_os" in ++case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= +@@ -6589,8 +7828,50 @@ + ;; + esac + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_static_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_static_works=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ fi ++ $rm -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } ++ ++if test x"$lt_cv_prog_compiler_static_works" = xyes; then ++ : ++else ++ lt_prog_compiler_static= ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6599,7 +7880,7 @@ + mkdir conftest + cd conftest + mkdir out +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or +@@ -6607,23 +7888,25 @@ + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:6613: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:7894: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:6617: \$? = $ac_status" >&5 ++ echo "$as_me:7898: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings +- if test ! -s out/conftest.err; then ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi +- chmod u+w . ++ chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation +@@ -6634,23 +7917,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -6660,8 +7943,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag= +@@ -6692,13 +7975,24 @@ + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. +- exclude_expsyms="_GLOBAL_OFFSET_TABLE_" ++ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + case $host_os in + cygwin* | mingw* | pw32*) +@@ -6709,6 +8003,10 @@ + with_gnu_ld=no + fi + ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; + openbsd*) + with_gnu_ld=no + ;; +@@ -6719,9 +8017,30 @@ + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ + # See if GNU ld supports shared libraries. + case $host_os in +- aix3* | aix4* | aix5*) ++ aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no +@@ -6769,10 +8088,10 @@ + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +@@ -6781,13 +8100,69 @@ + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ interix[3-9]*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ gnu* | linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ *) ++ tmp_sharedflag='-shared' ;; ++ esac ++ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ link_all_deplibs=no + else + ld_shlibs=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -6797,7 +8172,7 @@ + fi + ;; + +- solaris* | sysv5*) ++ solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 +@@ -6818,6 +8193,33 @@ + fi + ;; + ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ;; ++ + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= +@@ -6825,31 +8227,6 @@ + hardcode_shlibpath_var=no + ;; + +- linux*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_cmds="$tmp_archive_cmds" +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ +-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +-$echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- else +- archive_expsym_cmds="$tmp_archive_cmds" +- fi +- else +- ld_shlibs=no +- fi +- ;; +- + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +@@ -6860,16 +8237,11 @@ + ;; + esac + +- if test "$ld_shlibs" = yes; then +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec= +- fi ++ if test "$ld_shlibs" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) +@@ -6881,14 +8253,14 @@ + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + +- aix4* | aix5*) ++ aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. +@@ -6908,13 +8280,14 @@ + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done ++ ;; + esac + + exp_sym_flag='-bexport' +@@ -6933,7 +8306,7 @@ + link_all_deplibs=yes + + if test "$GCC" = yes; then +- case $host_os in aix4.012|aix4.012.*) ++ case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` +@@ -6941,7 +8314,7 @@ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 +- hardcode_direct=yes ++ : + else + # We have old collect2 + hardcode_direct=unsupported +@@ -6952,8 +8325,12 @@ + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi ++ ;; + esac + shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi + else + # not using gcc + if test "$host_cpu" = ia64; then +@@ -6961,11 +8338,11 @@ + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else +- if test "$aix_use_runtimelinking" = yes; then ++ if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' +- fi ++ fi + fi + fi + +@@ -6993,49 +8370,54 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'`; fi ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +@@ -7054,39 +8436,44 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'`; fi ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -7095,13 +8482,11 @@ + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- always_export_symbols=yes + # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec=' ' ++ whole_archive_flag_spec='$convenience' + archive_cmds_need_lc=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; +@@ -7114,7 +8499,7 @@ + ld_shlibs=no + ;; + +- bsdi4*) ++ bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + +@@ -7134,58 +8519,57 @@ + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds='true' + # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes + ;; + + darwin* | rhapsody*) +- if test "$GXX" = yes ; then +- archive_cmds_need_lc=no +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- allow_undefined_flag='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; + esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- module_cmds='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported +- whole_archive_flag_spec='-all_load $convenience' ++ whole_archive_flag_spec='' + link_all_deplibs=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + else +- ld_shlibs=no ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' ++ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs=no ++ ;; ++ esac + fi + ;; + +@@ -7219,7 +8603,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes +@@ -7242,47 +8626,62 @@ + export_dynamic_flag_spec='${wl}-E' + ;; + +- hpux10* | hpux11*) ++ hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*|ia64*) ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ++ hardcode_direct=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; ++ ia64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*) +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) + hardcode_libdir_flag_spec_ld='+b $libdir' +- hardcode_libdir_separator=: +- hardcode_direct=no +- hardcode_shlibpath_var=no +- ;; +- ia64*) +- hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=no + hardcode_shlibpath_var=no +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L=yes + ;; + *) +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: + hardcode_direct=yes + export_dynamic_flag_spec='${wl}-E' + +@@ -7306,7 +8705,7 @@ + link_all_deplibs=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -7326,23 +8725,28 @@ + ;; + + openbsd*) +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- export_dynamic_flag_spec='${wl}-E' ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ *) ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi + else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- ;; +- *) +- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- ;; +- esac ++ ld_shlibs=no + fi + ;; + +@@ -7375,7 +8779,7 @@ + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' +@@ -7383,21 +8787,15 @@ + hardcode_libdir_separator=: + ;; + +- sco3.2v5*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- export_dynamic_flag_spec='${wl}-Bexport' +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; +- + solaris*) + no_undefined_flag=' -z text' + if test "$GCC" = yes; then ++ wlarc='${wl}' + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else ++ wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +@@ -7406,8 +8804,17 @@ + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ++ fi ++ ;; + esac + link_all_deplibs=yes + ;; +@@ -7464,36 +8871,45 @@ + fi + ;; + +- sysv4.2uw2*) +- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=no ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag='${wl}-z,text' ++ archive_cmds_need_lc=no + hardcode_shlibpath_var=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; ++ runpath_var='LD_RUN_PATH' + +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) +- no_undefined_flag='${wl}-z ${wl}text' + if test "$GCC" = yes; then +- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else +- archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no + ;; + +- sysv5*) +- no_undefined_flag=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec= ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag='${wl}-z,text' ++ allow_undefined_flag='${wl}-z,nodefs' ++ archive_cmds_need_lc=no + hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi + ;; + + uts4*) +@@ -7508,15 +8924,10 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +-echo "${ECHO_T}$ld_shlibs" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6; } + test "$ld_shlibs" = no && can_build_shared=no + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +- + # + # Do we need to explicitly link libc? + # +@@ -7534,10 +8945,10 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 +@@ -7549,6 +8960,7 @@ + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl ++ pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= +@@ -7571,16 +8983,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -7594,17 +9006,55 @@ + version_type=none + dynamic_linker="$host_os ld.so" + sys_lib_dlsearch_path_spec="/lib /usr/lib" ++ + if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[lt_foo]++; } ++ if (lt_freq[lt_foo] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`echo $lt_search_path_spec` + else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + fi +@@ -7625,7 +9075,7 @@ + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +-aix4* | aix5*) ++aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -7681,7 +9131,7 @@ + shlibpath_var=LIBRARY_PATH + ;; + +-bsdi4*) ++bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -7709,7 +9159,8 @@ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname' ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' +@@ -7739,7 +9190,7 @@ + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; +@@ -7762,13 +9213,9 @@ + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' +- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. +- if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` +- else +- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' +- fi ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +@@ -7785,20 +9232,17 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) +@@ -7816,14 +9260,19 @@ + freebsd2*) + shlibpath_overrides_runpath=yes + ;; +- freebsd3.01* | freebsdelf3.01*) ++ freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; +- *) # from 3.2 on ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + esac + ;; + +@@ -7843,7 +9292,7 @@ + version_type=sunos + need_lib_prefix=no + need_version=no +- case "$host_cpu" in ++ case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes +@@ -7883,11 +9332,23 @@ + postinstall_cmds='chmod 555 $lib' + ;; + +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then ++interix[3-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix +@@ -7926,7 +9387,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -7940,31 +9401,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 7947 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -7976,7 +9416,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -7985,7 +9425,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -8025,8 +9465,13 @@ + + openbsd*) + version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no +- need_version=yes ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH +@@ -8064,11 +9509,8 @@ + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH ++rdos*) ++ dynamic_linker=no + ;; + + solaris*) +@@ -8096,7 +9538,7 @@ + need_version=yes + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' +@@ -8129,6 +9571,29 @@ + fi + ;; + ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ + uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -8140,16 +9605,36 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" ++fi ++ ++sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" ++fi ++ ++sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action= + if test -n "$hardcode_libdir_flag_spec" || \ +- test -n "$runpath_var " || \ +- test "X$hardcode_automatic"="Xyes" ; then ++ test -n "$runpath_var" || \ ++ test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && +@@ -8169,8 +9654,8 @@ + # directories. + hardcode_action=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action" >&5 +-echo "${ECHO_T}$hardcode_action" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6; } + + if test "$hardcode_action" = relink; then + # Fast installation is not supported +@@ -8183,29 +9668,30 @@ + + striplib= + old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } + if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else + # FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ old_striplib="$STRIP -S" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ;; + *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + esac + fi +@@ -8237,8 +9723,8 @@ + + darwin*) + # if libdl is installed we need to link against it +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } + if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8251,56 +9737,53 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { +-dlopen (); ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_dl_dlopen=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dl_dlopen=no ++ ac_cv_lib_dl_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } + if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + else +@@ -8314,8 +9797,8 @@ + ;; + + *) +- echo "$as_me:$LINENO: checking for shl_load" >&5 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } + if test "${ac_cv_func_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8342,73 +9825,64 @@ + + #undef shl_load + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char shl_load (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shl_load) || defined (__stub___shl_load) ++#if defined __stub_shl_load || defined __stub___shl_load + choke me +-#else +-char (*f) () = shl_load; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != shl_load; ++return shl_load (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_shl_load=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_shl_load=no ++ ac_cv_func_shl_load=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } + if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" + else +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } + if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8421,61 +9895,58 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char shl_load (); + int + main () + { +-shl_load (); ++return shl_load (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_dld_shl_load=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dld_shl_load=no ++ ac_cv_lib_dld_shl_load=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } + if test $ac_cv_lib_dld_shl_load = yes; then +- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" ++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" + else +- echo "$as_me:$LINENO: checking for dlopen" >&5 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } + if test "${ac_cv_func_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8502,73 +9973,64 @@ + + #undef dlopen + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_dlopen) || defined (__stub___dlopen) ++#if defined __stub_dlopen || defined __stub___dlopen + choke me +-#else +-char (*f) () = dlopen; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != dlopen; ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_dlopen=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_dlopen=no ++ ac_cv_func_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } + if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" + else +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } + if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8581,61 +10043,58 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { +-dlopen (); ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_dl_dlopen=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dl_dlopen=no ++ ac_cv_lib_dl_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } + if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + else +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } + if test "${ac_cv_lib_svld_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8648,61 +10107,58 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { +-dlopen (); ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_svld_dlopen=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_svld_dlopen=no ++ ac_cv_lib_svld_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } + if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" + else +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } + if test "${ac_cv_lib_dld_dld_link+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8715,58 +10171,55 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dld_link (); + int + main () + { +-dld_link (); ++return dld_link (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_dld_dld_link=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dld_dld_link=no ++ ac_cv_lib_dld_dld_link=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } + if test $ac_cv_lib_dld_dld_link = yes; then +- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" ++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" + fi + + +@@ -8799,13 +10252,13 @@ + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } + if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8815,7 +10268,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null ++ (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed +@@ -8897,13 +10352,13 @@ + + + fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } + if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8913,7 +10368,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null ++ (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed +@@ -8995,8 +10452,8 @@ + + + fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" +@@ -9017,19 +10474,19 @@ + fi + + +-# Report which librarie types wil actually be built +-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6 ++# Report which library types will actually be built ++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. +-case "$host_os" in ++case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then +@@ -9038,58 +10495,21 @@ + fi + ;; + +-aix4* | aix5*) ++aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi +- ;; +- darwin* | rhapsody*) +- if test "$GCC" = yes; then +- archive_cmds_need_lc=no +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- allow_undefined_flag='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- output_verbose_link_cmd='echo' +- archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' +- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- hardcode_direct=no +- hardcode_automatic=yes +- hardcode_shlibpath_var=unsupported +- whole_archive_flag_spec='-all_load $convenience' +- link_all_deplibs=yes +- else +- ld_shlibs=no +- fi + ;; + esac +-echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6 ++{ echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes +-echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6 ++{ echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } + + # The else clause should only fire when bootstrapping the + # libtool distribution, otherwise you forgot to ship ltmain.sh +@@ -9104,7 +10524,7 @@ + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +@@ -9131,6 +10551,7 @@ + predeps \ + postdeps \ + compiler_lib_search_path \ ++ compiler_lib_search_dirs \ + archive_cmds \ + archive_expsym_cmds \ + postinstall_cmds \ +@@ -9146,6 +10567,7 @@ + module_cmds \ + module_expsym_cmds \ + lt_cv_prog_compiler_c_o \ ++ fix_srcfile_path \ + exclude_expsyms \ + include_expsyms; do + +@@ -9190,7 +10612,7 @@ + # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) + # NOTE: Changes made to this file will be lost: look at ltmain.sh. + # +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 + # Free Software Foundation, Inc. + # + # This file is part of GNU Libtool: +@@ -9208,7 +10630,7 @@ + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a +@@ -9219,11 +10641,11 @@ + SED=$lt_SED + + # Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="$SED -e s/^X//" ++Xsed="$SED -e 1s/^X//" + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. +-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + # The names of the tagged configurations supported by this script. + available_tags= +@@ -9253,6 +10675,12 @@ + # The host system. + host_alias=$host_alias + host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + + # An echo program that does not interpret backslashes. + echo=$lt_echo +@@ -9264,6 +10692,9 @@ + # A C compiler. + LTCC=$lt_LTCC + ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ + # A language-specific compiler. + CC=$lt_compiler + +@@ -9329,7 +10760,7 @@ + # Does compiler simultaneously support -c and -o options? + compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +-# Must we lock files when doing compilation ? ++# Must we lock files when doing compilation? + need_locks=$lt_need_locks + + # Do we need the lib prefix for modules? +@@ -9417,6 +10848,10 @@ + # shared library. + postdeps=$lt_postdeps + ++# The directories searched by this compiler when creating a shared ++# library ++compiler_lib_search_dirs=$lt_compiler_lib_search_dirs ++ + # The library search path used internally by the compiler when linking + # a shared library. + compiler_lib_search_path=$lt_compiler_lib_search_path +@@ -9505,7 +10940,7 @@ + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + + # Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path" ++fix_srcfile_path=$lt_fix_srcfile_path + + # Set to yes if exported symbols are required. + always_export_symbols=$always_export_symbols +@@ -9572,11 +11007,11 @@ + CC="$lt_save_CC" + + +-# Check whether --with-tags or --without-tags was given. ++# Check whether --with-tags was given. + if test "${with_tags+set}" = set; then +- withval="$with_tags" +- tagnames="$withval" +-fi; ++ withval=$with_tags; tagnames="$withval" ++fi ++ + + if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then +@@ -9594,6 +11029,9 @@ + echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} + fi + fi ++ if test -z "$LTCFLAGS"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" ++ fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. +@@ -9624,8 +11062,10 @@ + + case $tagname in + CXX) +- if test -n "$CXX" && test "X$CXX" != "Xno"; then +- ac_ext=cc ++ if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -9644,6 +11084,7 @@ + hardcode_libdir_flag_spec_ld_CXX= + hardcode_libdir_separator_CXX= + hardcode_minus_L_CXX=no ++hardcode_shlibpath_var_CXX=unsupported + hardcode_automatic_CXX=no + module_cmds_CXX= + module_expsym_cmds_CXX= +@@ -9659,29 +11100,47 @@ + predeps_CXX= + postdeps_CXX= + compiler_lib_search_path_CXX= ++compiler_lib_search_dirs_CXX= + + # Source file extension for C++ test sources. +-ac_ext=cc ++ac_ext=cpp + + # Object file extension for compiled C++ test sources. + objext=o + objext_CXX=$objext + + # Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;\n" ++lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests +-lt_simple_link_test_code='int main(int, char *) { return(0); }\n' ++lt_simple_link_test_code='int main(int, char *[]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + + # If no C compiler was specified, use CC. + LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ + # Allow CC to be a program name with arguments. + compiler=$CC + + ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm -r conftest* ++ ++ + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_LD=$LD +@@ -9692,18 +11151,27 @@ + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else +- unset lt_cv_prog_gnu_ld ++ $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else +- unset lt_cv_path_LD ++ $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + compiler=$CC + compiler_CXX=$CC +-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ + + # We don't want -fno-exception wen compiling C++ code, so set the + # no_builtin_flag separately +@@ -9717,18 +11185,18 @@ + # Set up default GNU C++ configuration + + +-# Check whether --with-gnu-ld or --without-gnu-ld was given. ++# Check whether --with-gnu-ld was given. + if test "${with_gnu_ld+set}" = set; then +- withval="$with_gnu_ld" +- test "$withval" = no || with_gnu_ld=yes ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no +-fi; ++fi ++ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -9757,11 +11225,11 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- echo "$as_me:$LINENO: checking for GNU ld" >&5 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } + else +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } + fi + if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -9774,7 +11242,7 @@ + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some GNU ld's only accept -v. ++ # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +-echo "${ECHO_T}$LD" >&6 ++ { echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 + echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } + if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- # I'd rather use --version here, but apparently some GNU ld's only accept -v. ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. + case `$LD -v 2>&1 &5 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + + +@@ -9869,15 +11337,15 @@ + fi + + # PORTME: fill in a description of your system's C++ link characteristics +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + ld_shlibs_CXX=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +- aix4* | aix5*) ++ aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. +@@ -9890,7 +11358,7 @@ + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) +@@ -9899,6 +11367,7 @@ + ;; + esac + done ++ ;; + esac + + exp_sym_flag='-bexport' +@@ -9917,7 +11386,7 @@ + link_all_deplibs_CXX=yes + + if test "$GXX" = yes; then +- case $host_os in aix4.012|aix4.012.*) ++ case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` +@@ -9925,7 +11394,7 @@ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 +- hardcode_direct_CXX=yes ++ : + else + # We have old collect2 + hardcode_direct_CXX=unsupported +@@ -9936,8 +11405,12 @@ + hardcode_libdir_flag_spec_CXX='-L$libdir' + hardcode_libdir_separator_CXX= + fi ++ ;; + esac + shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi + else + # not using gcc + if test "$host_cpu" = ia64; then +@@ -9977,50 +11450,55 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'` ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'`; fi ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + +- archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_CXX="-z nodefs" +- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" ++ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +@@ -10039,39 +11517,44 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'` ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'`; fi ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -10080,16 +11563,26 @@ + # -berok will link without error, but may produce a broken library. + no_undefined_flag_CXX=' ${wl}-bernotok' + allow_undefined_flag_CXX=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- always_export_symbols_CXX=yes + # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_CXX=' ' ++ whole_archive_flag_spec_CXX='$convenience' + archive_cmds_need_lc_CXX=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag_CXX=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ + chorus*) + case $cc_basename in + *) +@@ -10108,7 +11601,7 @@ + enable_shared_with_static_runtimes_CXX=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +@@ -10117,70 +11610,53 @@ + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_CXX=no + fi + ;; +- +- darwin* | rhapsody*) +- if test "$GXX" = yes; then +- archive_cmds_need_lc_CXX=no +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_CXX='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_CXX='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_CXX='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- allow_undefined_flag_CXX='-undefined dynamic_lookup' +- ;; +- esac ++ darwin* | rhapsody*) ++ archive_cmds_need_lc_CXX=no ++ hardcode_direct_CXX=no ++ hardcode_automatic_CXX=yes ++ hardcode_shlibpath_var_CXX=unsupported ++ whole_archive_flag_spec_CXX='' ++ link_all_deplibs_CXX=yes ++ allow_undefined_flag_CXX="$_lt_dar_allow_undefined" ++ if test "$GXX" = yes ; then ++ output_verbose_link_cmd='echo' ++ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ if test "$lt_cv_apple_cc_single_mod" != "yes"; then ++ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" ++ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" ++ fi ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' ++ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs_CXX=no ++ ;; ++ esac + fi +- ;; +- esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- module_cmds_CXX='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- hardcode_direct_CXX=no +- hardcode_automatic_CXX=yes +- hardcode_shlibpath_var_CXX=unsupported +- whole_archive_flag_spec_CXX='-all_load $convenience' +- link_all_deplibs_CXX=yes +- else +- ld_shlibs_CXX=no +- fi +- ;; ++ ;; + + dgux*) + case $cc_basename in +- ec++) ++ ec++*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +- ghcx) ++ ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no +@@ -10191,14 +11667,14 @@ + ;; + esac + ;; +- freebsd12*) ++ freebsd[12]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + ld_shlibs_CXX=no + ;; + freebsd-elf*) + archive_cmds_need_lc_CXX=no + ;; +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + ld_shlibs_CXX=yes +@@ -10215,11 +11691,11 @@ + # location of the library. + + case $cc_basename in +- CC) ++ CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +- aCC) ++ aCC*) + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when +@@ -10229,7 +11705,7 @@ + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then +@@ -10243,33 +11719,20 @@ + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then +- case "$host_cpu" in +- hppa*64*) +- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' +- hardcode_libdir_flag_spec_ld_CXX='+b $libdir' +- hardcode_libdir_separator_CXX=: +- ;; +- ia64*) +- hardcode_libdir_flag_spec_CXX='-L$libdir' +- ;; ++ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ;; + *) +- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_CXX=: + export_dynamic_flag_spec_CXX='${wl}-E' + ;; + esac + fi +- case "$host_cpu" in +- hppa*64*) +- hardcode_direct_CXX=no +- hardcode_shlibpath_var_CXX=no +- ;; +- ia64*) ++ case $host_cpu in ++ hppa*64*|ia64*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no +- hardcode_minus_L_CXX=yes # Not in the search PATH, +- # but as the default +- # location of the library. + ;; + *) + hardcode_direct_CXX=yes +@@ -10280,14 +11743,17 @@ + esac + + case $cc_basename in +- CC) ++ CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +- aCC) +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +@@ -10306,9 +11772,12 @@ + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then +- case "$host_cpu" in +- ia64*|hppa*64*) +- archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +@@ -10322,11 +11791,25 @@ + ;; + esac + ;; ++ interix[3-9]*) ++ hardcode_direct_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; + irix5* | irix6*) + case $cc_basename in +- CC) ++ CC*) + # SGI C++ +- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' ++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is +@@ -10337,7 +11820,7 @@ + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi +@@ -10348,9 +11831,9 @@ + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in +- KCC) ++ KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file +@@ -10375,17 +11858,41 @@ + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + ;; +- icpc) ++ icpc*) + # Intel C++ + with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac + archive_cmds_need_lc_CXX=no +- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; +- cxx) ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) + # Compaq C++ + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' +@@ -10404,9 +11911,32 @@ + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; +- esac +- ;; +- lynxos*) ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ no_undefined_flag_CXX=' -zdefs' ++ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' ++ hardcode_libdir_flag_spec_CXX='-R$libdir' ++ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ ++ # Not sure whether something based on ++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 ++ # would be better. ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ lynxos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +@@ -10416,7 +11946,7 @@ + ;; + mvs*) + case $cc_basename in +- cxx) ++ cxx*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +@@ -10426,7 +11956,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= +@@ -10437,9 +11967,29 @@ + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ ld_shlibs_CXX=no ++ ;; ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct_CXX=yes ++ hardcode_shlibpath_var_CXX=no ++ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd='echo' ++ else ++ ld_shlibs_CXX=no ++ fi ++ ;; + osf3*) + case $cc_basename in +- KCC) ++ KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file +@@ -10455,14 +12005,14 @@ + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + + ;; +- RCC) ++ RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +- cxx) ++ cxx*) + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' ++ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: +@@ -10480,7 +12030,7 @@ + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: +@@ -10499,7 +12049,7 @@ + ;; + osf4* | osf5*) + case $cc_basename in +- KCC) ++ KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file +@@ -10514,17 +12064,17 @@ + # the KAI C++ compiler. + old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' + ;; +- RCC) ++ RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +- cxx) ++ cxx*) + allow_undefined_flag_CXX=' -expect_unresolved \*' +- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' ++ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ +- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ + $rm $lib.exp' + + hardcode_libdir_flag_spec_CXX='-rpath $libdir' +@@ -10543,7 +12093,7 @@ + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: +@@ -10564,27 +12114,14 @@ + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +- sco*) +- archive_cmds_need_lc_CXX=no +- case $cc_basename in +- CC) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; + sunos4*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +- lcc) ++ lcc*) + # Lucid + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no +@@ -10597,36 +12134,28 @@ + ;; + solaris*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.2, 5.x and Centerline C++ ++ archive_cmds_need_lc_CXX=yes + no_undefined_flag_CXX=' -zdefs' +- archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_shlibpath_var_CXX=no + case $host_os in +- solaris2.0-5 | solaris2.0-5.*) ;; ++ solaris2.[0-5] | solaris2.[0-5].*) ;; + *) +- # The C++ compiler is used as linker so we must use $wl +- # flag to pass the commands to the underlying system +- # linker. ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' + ;; + esac + link_all_deplibs_CXX=yes + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ output_verbose_link_cmd='echo' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is +@@ -10634,7 +12163,7 @@ + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; +- gcx) ++ gcx*) + # Green Hills C++ Compiler + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + +@@ -10668,16 +12197,73 @@ + fi + + hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ ;; ++ esac + fi + ;; + esac + ;; +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag_CXX='${wl}-z,text' ++ archive_cmds_need_lc_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ # So that behaviour is only enabled if SCOABSPATH is set to a ++ # non-empty value in the environment. Most likely only useful for ++ # creating official distributions of packages. ++ # This is a hack until libtool officially supports absolute path ++ # names for shared libraries. ++ no_undefined_flag_CXX='${wl}-z,text' ++ allow_undefined_flag_CXX='${wl}-z,nodefs' + archive_cmds_need_lc_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator_CXX=':' ++ link_all_deplibs_CXX=yes ++ export_dynamic_flag_spec_CXX='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac + ;; + tandem*) + case $cc_basename in +- NCC) ++ NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no +@@ -10697,14 +12283,13 @@ + ld_shlibs_CXX=no + ;; + esac +-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-echo "${ECHO_T}$ld_shlibs_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + + GCC_CXX="$GXX" + LD_CXX="$LD" + +- + cat > conftest.$ac_ext <&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ # ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ if test "$solaris_use_stlport4" != yes; then ++ postdeps_CXX='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++ ++solaris*) ++ case $cc_basename in ++ CC*) ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ if test "$solaris_use_stlport4" != yes; then ++ postdeps_CXX='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++esac ++ + case " $postdeps_CXX " in + *" -lc "*) archive_cmds_need_lc_CXX=no ;; + esac +@@ -10814,8 +12459,8 @@ + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then +@@ -10836,12 +12481,14 @@ + # like `-m68040'. + lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' + ;; +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; +- mingw* | os2* | pw32*) ++ mingw* | cygwin* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) +@@ -10853,6 +12500,10 @@ + # DJGPP does not support shared libraries at all + lt_prog_compiler_pic_CXX= + ;; ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_CXX=-Kconform_pic +@@ -10861,7 +12512,7 @@ + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + ;; + *) +@@ -10875,7 +12526,7 @@ + esac + else + case $host_os in +- aix4* | aix5*) ++ aix[4-9]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor +@@ -10886,18 +12537,28 @@ + ;; + chorus*) + case $cc_basename in +- cxch68) ++ cxch68*) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic_CXX='-qnocommon' ++ lt_prog_compiler_wl_CXX='-Wl,' ++ ;; ++ esac ++ ;; + dgux*) + case $cc_basename in +- ec++) ++ ec++*) + lt_prog_compiler_pic_CXX='-KPIC' + ;; +- ghcx) ++ ghcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-pic' + ;; +@@ -10905,22 +12566,22 @@ + ;; + esac + ;; +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in +- CC) ++ CC*) + lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" ++ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + lt_prog_compiler_pic_CXX='+Z' + fi + ;; +- aCC) ++ aCC*) + lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" +- case "$host_cpu" in ++ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -10933,9 +12594,13 @@ + ;; + esac + ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in +- CC) ++ CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-non_shared' + # CC pic flag -KPIC is the default. +@@ -10944,20 +12609,26 @@ + ;; + esac + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in +- KCC) ++ KCC*) + # KAI C++ Compiler + lt_prog_compiler_wl_CXX='--backend -Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + ;; +- icpc) ++ icpc* | ecpc*) + # Intel C++ + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-static' + ;; +- cxx) ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler. ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-fpic' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ ;; ++ cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. +@@ -10965,6 +12636,14 @@ + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ lt_prog_compiler_wl_CXX='-Qoption ld ' ++ ;; ++ esac + ;; + esac + ;; +@@ -10974,25 +12653,25 @@ + ;; + mvs*) + case $cc_basename in +- cxx) ++ cxx*) + lt_prog_compiler_pic_CXX='-W c,exportall' + ;; + *) + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in +- KCC) ++ KCC*) + lt_prog_compiler_wl_CXX='--backend -Wl,' + ;; +- RCC) ++ RCC*) + # Rational C++ 2.4.1 + lt_prog_compiler_pic_CXX='-pic' + ;; +- cxx) ++ cxx*) + # Digital/Compaq C++ + lt_prog_compiler_wl_CXX='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha +@@ -11006,24 +12685,15 @@ + ;; + psos*) + ;; +- sco*) +- case $cc_basename in +- CC) +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- *) +- ;; +- esac +- ;; + solaris*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; +- gcx) ++ gcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-PIC' + ;; +@@ -11033,12 +12703,12 @@ + ;; + sunos4*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.x + lt_prog_compiler_pic_CXX='-pic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; +- lcc) ++ lcc*) + # Lucid + lt_prog_compiler_pic_CXX='-pic' + ;; +@@ -11048,7 +12718,7 @@ + ;; + tandem*) + case $cc_basename in +- NCC) ++ NCC*) + # NonStop-UX NCC 3.20 + lt_prog_compiler_pic_CXX='-KPIC' + ;; +@@ -11056,7 +12726,14 @@ + ;; + esac + ;; +- unixware*) ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ ;; ++ esac + ;; + vxworks*) + ;; +@@ -11066,22 +12743,22 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_CXX"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6 +-if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- lt_prog_compiler_pic_works_CXX=no ++ lt_cv_prog_compiler_pic_works_CXX=no + ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. +@@ -11089,28 +12766,30 @@ + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:11095: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:12772: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:11099: \$? = $ac_status" >&5 ++ echo "$as_me:12776: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- lt_prog_compiler_pic_works_CXX=yes ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works_CXX=yes + fi + fi + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_CXX" >&6; } + +-if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then ++if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in + "" | " "*) ;; + *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; +@@ -11121,7 +12800,7 @@ + fi + + fi +-case "$host_os" in ++case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_CXX= +@@ -11131,8 +12810,50 @@ + ;; + esac + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_static_works_CXX=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works_CXX=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works_CXX=yes ++ fi ++ fi ++ $rm -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works_CXX" >&6; } ++ ++if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then ++ : ++else ++ lt_prog_compiler_static_CXX= ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -11141,7 +12862,7 @@ + mkdir conftest + cd conftest + mkdir out +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or +@@ -11149,23 +12870,25 @@ + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:11155: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:12876: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:11159: \$? = $ac_status" >&5 ++ echo "$as_me:12880: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings +- if test ! -s out/conftest.err; then ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi +- chmod u+w . ++ chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation +@@ -11176,23 +12899,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -11202,12 +12925,12 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in +- aix4* | aix5*) ++ aix[4-9]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +@@ -11220,22 +12943,21 @@ + export_symbols_cmds_CXX="$ltdll_cmds" + ;; + cygwin* | mingw*) +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ link_all_deplibs_CXX=no + ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac ++ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + +-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-echo "${ECHO_T}$ld_shlibs_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +- + # + # Do we need to explicitly link libc? + # +@@ -11253,10 +12975,10 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 +@@ -11268,6 +12990,7 @@ + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_CXX ++ pic_flag=$lt_prog_compiler_pic_CXX + compiler_flags=-v + linker_flags=-v + verstring= +@@ -11290,16 +13013,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -11313,20 +13036,7 @@ + version_type=none + dynamic_linker="$host_os ld.so" + sys_lib_dlsearch_path_spec="/lib /usr/lib" +-if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +-else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +-fi ++ + need_lib_prefix=unknown + hardcode_into_libs=no + +@@ -11344,7 +13054,7 @@ + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +-aix4* | aix5*) ++aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -11400,7 +13110,7 @@ + shlibpath_var=LIBRARY_PATH + ;; + +-bsdi4*) ++bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -11428,7 +13138,8 @@ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname' ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' +@@ -11458,7 +13169,7 @@ + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; +@@ -11481,13 +13192,8 @@ + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' +- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. +- if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` +- else +- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' +- fi ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +@@ -11504,20 +13210,17 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) +@@ -11535,14 +13238,19 @@ + freebsd2*) + shlibpath_overrides_runpath=yes + ;; +- freebsd3.01* | freebsdelf3.01*) ++ freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; +- *) # from 3.2 on ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + esac + ;; + +@@ -11562,7 +13270,7 @@ + version_type=sunos + need_lib_prefix=no + need_version=no +- case "$host_cpu" in ++ case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes +@@ -11602,6 +13310,18 @@ + postinstall_cmds='chmod 555 $lib' + ;; + ++interix[3-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ + irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; +@@ -11645,7 +13365,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -11659,31 +13379,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 11666 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -11695,7 +13394,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -11704,7 +13403,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -11744,8 +13443,13 @@ + + openbsd*) + version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no +- need_version=yes ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH +@@ -11783,11 +13487,8 @@ + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH ++rdos*) ++ dynamic_linker=no + ;; + + solaris*) +@@ -11815,7 +13516,7 @@ + need_version=yes + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' +@@ -11848,6 +13549,29 @@ + fi + ;; + ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ + uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -11859,16 +13583,36 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" ++fi ++ ++sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" ++fi ++ ++sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_CXX= + if test -n "$hardcode_libdir_flag_spec_CXX" || \ +- test -n "$runpath_var CXX" || \ +- test "X$hardcode_automatic_CXX"="Xyes" ; then ++ test -n "$runpath_var_CXX" || \ ++ test "X$hardcode_automatic_CXX" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_CXX" != no && +@@ -11888,8 +13632,8 @@ + # directories. + hardcode_action_CXX=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 +-echo "${ECHO_T}$hardcode_action_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 ++echo "${ECHO_T}$hardcode_action_CXX" >&6; } + + if test "$hardcode_action_CXX" = relink; then + # Fast installation is not supported +@@ -11900,1257 +13644,437 @@ + enable_fast_install=needless + fi + +-striplib= +-old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +- else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- ;; +- *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +- ;; +- esac +-fi +- +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= + +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes ++# The else clause should only fire when bootstrapping the ++# libtool distribution, otherwise you forgot to ship ltmain.sh ++# with your package, and you will get complaints that there are ++# no rules to generate ltmain.sh. ++if test -f "$ltmain"; then ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ # Now quote all the things that may contain metacharacters while being ++ # careful not to overquote the AC_SUBSTed values. We take copies of the ++ # variables and quote the copies for generation of the libtool script. ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ ++ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler_CXX \ ++ CC_CXX \ ++ LD_CXX \ ++ lt_prog_compiler_wl_CXX \ ++ lt_prog_compiler_pic_CXX \ ++ lt_prog_compiler_static_CXX \ ++ lt_prog_compiler_no_builtin_flag_CXX \ ++ export_dynamic_flag_spec_CXX \ ++ thread_safe_flag_spec_CXX \ ++ whole_archive_flag_spec_CXX \ ++ enable_shared_with_static_runtimes_CXX \ ++ old_archive_cmds_CXX \ ++ old_archive_from_new_cmds_CXX \ ++ predep_objects_CXX \ ++ postdep_objects_CXX \ ++ predeps_CXX \ ++ postdeps_CXX \ ++ compiler_lib_search_path_CXX \ ++ compiler_lib_search_dirs_CXX \ ++ archive_cmds_CXX \ ++ archive_expsym_cmds_CXX \ ++ postinstall_cmds_CXX \ ++ postuninstall_cmds_CXX \ ++ old_archive_from_expsyms_cmds_CXX \ ++ allow_undefined_flag_CXX \ ++ no_undefined_flag_CXX \ ++ export_symbols_cmds_CXX \ ++ hardcode_libdir_flag_spec_CXX \ ++ hardcode_libdir_flag_spec_ld_CXX \ ++ hardcode_libdir_separator_CXX \ ++ hardcode_automatic_CXX \ ++ module_cmds_CXX \ ++ module_expsym_cmds_CXX \ ++ lt_cv_prog_compiler_c_o_CXX \ ++ fix_srcfile_path_CXX \ ++ exclude_expsyms_CXX \ ++ include_expsyms_CXX; do ++ ++ case $var in ++ old_archive_cmds_CXX | \ ++ old_archive_from_new_cmds_CXX | \ ++ archive_cmds_CXX | \ ++ archive_expsym_cmds_CXX | \ ++ module_cmds_CXX | \ ++ module_expsym_cmds_CXX | \ ++ old_archive_from_expsyms_cmds_CXX | \ ++ export_symbols_cmds_CXX | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ ++ postinstall_cmds | postuninstall_cmds | \ ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ # Double-quote double-evaled strings. ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ ;; ++ *) ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ ;; ++ esac ++ done ++ ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; ++ esac + +- mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; ++cfgfile="$ofile" + +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; ++ cat <<__EOF__ >> "$cfgfile" ++# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +- darwin*) +- # if libdl is installed we need to link against it +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL + +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared + +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes ++# Whether or not to build static libraries. ++build_old_libs=$enable_static + +-fi ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc_CXX + +- ;; ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX + +- *) +- echo "$as_me:$LINENO: checking for shl_load" >&5 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +-if test "${ac_cv_func_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shl_load to an innocuous variant, in case declares shl_load. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shl_load innocuous_shl_load ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shl_load (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + +-#undef shl_load ++# An echo program that does not interpret backslashes. ++echo=$lt_echo + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shl_load) || defined (__stub___shl_load) +-choke me +-#else +-char (*f) () = shl_load; +-#endif +-#ifdef __cplusplus +-} +-#endif ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS + +-int +-main () +-{ +-return f != shl_load; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# A C compiler. ++LTCC=$lt_LTCC + +-ac_cv_func_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +-if test $ac_cv_func_shl_load = yes; then +- lt_cv_dlopen="shl_load" +-else +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-int +-main () +-{ +-shl_load (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# A language-specific compiler. ++CC=$lt_compiler_CXX + +-ac_cv_lib_dld_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +-if test $ac_cv_lib_dld_shl_load = yes; then +- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +-else +- echo "$as_me:$LINENO: checking for dlopen" >&5 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +-if test "${ac_cv_func_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define dlopen to an innocuous variant, in case declares dlopen. +- For example, HP-UX 11i declares gettimeofday. */ +-#define dlopen innocuous_dlopen ++# Is the compiler the GNU C compiler? ++with_gcc=$GCC_CXX + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char dlopen (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++# An ERE matcher. ++EGREP=$lt_EGREP + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++# The linker used to build libraries. ++LD=$lt_LD_CXX + +-#undef dlopen ++# Whether we need hard or soft links. ++LN_S=$lt_LN_S + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_dlopen) || defined (__stub___dlopen) +-choke me +-#else +-char (*f) () = dlopen; +-#endif +-#ifdef __cplusplus +-} +-#endif ++# A BSD-compatible nm program. ++NM=$lt_NM + +-int +-main () +-{ +-return f != dlopen; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# A symbol stripping program ++STRIP=$lt_STRIP + +-ac_cv_func_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +-if test $ac_cv_func_dlopen = yes; then +- lt_cv_dlopen="dlopen" +-else +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# Used to examine libraries when file_magic_cmd begins "file" ++MAGIC_CMD=$MAGIC_CMD + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Used on cygwin: DLL creation program. ++DLLTOOL="$DLLTOOL" + +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +-if test "${ac_cv_lib_svld_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lsvld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# Used on cygwin: object dumper. ++OBJDUMP="$OBJDUMP" + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_svld_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Used on cygwin: assembler. ++AS="$AS" + +-ac_cv_lib_svld_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +-if test $ac_cv_lib_svld_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +-else +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_dld_link+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dld_link (); +-int +-main () +-{ +-dld_link (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_dld_link=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds + +-ac_cv_lib_dld_dld_link=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +-if test $ac_cv_lib_dld_dld_link = yes; then +- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +-fi ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl_CXX + ++# Object file suffix (normally "o"). ++objext="$ac_objext" + +-fi ++# Old archive suffix (normally "a"). ++libext="$libext" + ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' + +-fi ++# Executable file suffix (normally ""). ++exeext="$exeext" + ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic_CXX ++pic_mode=$pic_mode + +-fi ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len + ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX + +-fi ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks + ++# Do we need the lib prefix for modules? ++need_lib_prefix=$need_lib_prefix + +-fi ++# Do we need a version for libraries? ++need_version=$need_version + +- ;; +- esac ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen + +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self + +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static + +- save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static_CXX + +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX + +-#include ++# Compiler flag to generate thread-safe objects. ++thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif ++# Library versioning type. ++version_type=$version_type + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++# Format of library name prefix. ++libname_spec=$lt_libname_spec + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME. ++library_names_spec=$lt_library_names_spec + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } ++# Commands used to build and install an old-style archive. ++RANLIB=$lt_RANLIB ++old_archive_cmds=$lt_old_archive_cmds_CXX ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self=no +- fi +-fi +-rm -fr conftest* ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX + ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6 ++# Commands used to build and install a shared archive. ++archive_cmds=$lt_archive_cmds_CXX ++archive_expsym_cmds=$lt_archive_expsym_cmds_CXX ++postinstall_cmds=$lt_postinstall_cmds ++postuninstall_cmds=$lt_postuninstall_cmds + +- if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self_static+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self_static=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib + +-#include ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects_CXX + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects_CXX + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps_CXX + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps_CXX + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++# The directories searched by this compiler when creating a shared ++# library ++compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path_CXX + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self_static=no +- fi +-fi +-rm -fr conftest* ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method + ++# Command to use when deplibs_check_method == file_magic. ++file_magic_cmd=$lt_file_magic_cmd + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 +- fi ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag_CXX + +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac ++# Flag that forces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag_CXX + +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds + +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac +-fi ++# Same as above, but a single script fragment to be evaled but not shown. ++finish_eval=$lt_finish_eval + ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_CXX \ +- CC_CXX \ +- LD_CXX \ +- lt_prog_compiler_wl_CXX \ +- lt_prog_compiler_pic_CXX \ +- lt_prog_compiler_static_CXX \ +- lt_prog_compiler_no_builtin_flag_CXX \ +- export_dynamic_flag_spec_CXX \ +- thread_safe_flag_spec_CXX \ +- whole_archive_flag_spec_CXX \ +- enable_shared_with_static_runtimes_CXX \ +- old_archive_cmds_CXX \ +- old_archive_from_new_cmds_CXX \ +- predep_objects_CXX \ +- postdep_objects_CXX \ +- predeps_CXX \ +- postdeps_CXX \ +- compiler_lib_search_path_CXX \ +- archive_cmds_CXX \ +- archive_expsym_cmds_CXX \ +- postinstall_cmds_CXX \ +- postuninstall_cmds_CXX \ +- old_archive_from_expsyms_cmds_CXX \ +- allow_undefined_flag_CXX \ +- no_undefined_flag_CXX \ +- export_symbols_cmds_CXX \ +- hardcode_libdir_flag_spec_CXX \ +- hardcode_libdir_flag_spec_ld_CXX \ +- hardcode_libdir_separator_CXX \ +- hardcode_automatic_CXX \ +- module_cmds_CXX \ +- module_expsym_cmds_CXX \ +- lt_cv_prog_compiler_c_o_CXX \ +- exclude_expsyms_CXX \ +- include_expsyms_CXX; do ++# Transform the output of nm in a proper C declaration ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +- case $var in +- old_archive_cmds_CXX | \ +- old_archive_from_new_cmds_CXX | \ +- archive_cmds_CXX | \ +- archive_expsym_cmds_CXX | \ +- module_cmds_CXX | \ +- module_expsym_cmds_CXX | \ +- old_archive_from_expsyms_cmds_CXX | \ +- export_symbols_cmds_CXX | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac ++# This is the shared library runtime path variable. ++runpath_var=$runpath_var + +-cfgfile="$ofile" ++# This is the shared library path variable. ++shlibpath_var=$shlibpath_var + +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action_CXX + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_CXX ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct=$hardcode_direct_CXX + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L=$hardcode_minus_L_CXX + +-# The host system. +-host_alias=$host_alias +-host=$host ++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into ++# the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic_CXX + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at relink time. ++variables_saved_for_relink="$variables_saved_for_relink" + +-# A C compiler. +-LTCC=$lt_LTCC ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs_CXX + +-# A language-specific compiler. +-CC=$lt_compiler_CXX ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_CXX ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +-# An ERE matcher. +-EGREP=$lt_EGREP ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path=$lt_fix_srcfile_path + +-# The linker used to build libraries. +-LD=$lt_LD_CXX ++# Set to yes if exported symbols are required. ++always_export_symbols=$always_export_symbols_CXX + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds_CXX + +-# A BSD-compatible nm program. +-NM=$lt_NM ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-# A symbol stripping program +-STRIP=$lt_STRIP ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms_CXX + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms_CXX + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++# ### END LIBTOOL TAG CONFIG: $tagname + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" ++__EOF__ + +-# Used on cygwin: assembler. +-AS="$AS" + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" ++ fi ++fi + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_CXX ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-# Object file suffix (normally "o"). +-objext="$ac_objext" +- +-# Old archive suffix (normally "a"). +-libext="$libext" +- +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' +- +-# Executable file suffix (normally ""). +-exeext="$exeext" +- +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_CXX +-pic_mode=$pic_mode +- +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len +- +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX +- +-# Must we lock files when doing compilation ? +-need_locks=$lt_need_locks +- +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix +- +-# Do we need a version for libraries? +-need_version=$need_version +- +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen +- +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self +- +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static +- +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_CXX +- +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX +- +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX +- +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX +- +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX +- +-# Library versioning type. +-version_type=$version_type +- +-# Format of library name prefix. +-libname_spec=$lt_libname_spec +- +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec +- +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec +- +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_CXX +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds +- +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX +- +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX +- +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_CXX +-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds +- +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_CXX +-module_expsym_cmds=$lt_module_expsym_cmds_CXX +- +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_CXX +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_CXX +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_CXX +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_CXX +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX +- +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method +- +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd +- +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_CXX +- +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_CXX +- +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds +- +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval +- +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe +- +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +- +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address +- +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var +- +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var +- +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath +- +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_CXX +- +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs +- +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +- +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_CXX +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_CXX +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_CXX +- +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" +- +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_CXX +- +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec +- +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +- +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path_CXX" +- +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_CXX +- +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_CXX +- +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds +- +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_CXX +- +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_CXX +- +-# ### END LIBTOOL TAG CONFIG: $tagname +- +-__EOF__ +- +- +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi +- +- +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +-CC=$lt_save_CC +-LDCXX=$LD +-LD=$lt_save_LD +-GCC=$lt_save_GCC +-with_gnu_ldcxx=$with_gnu_ld +-with_gnu_ld=$lt_save_with_gnu_ld +-lt_cv_path_LDCXX=$lt_cv_path_LD +-lt_cv_path_LD=$lt_save_path_LD +-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++CC=$lt_save_CC ++LDCXX=$LD ++LD=$lt_save_LD ++GCC=$lt_save_GCC ++with_gnu_ldcxx=$with_gnu_ld ++with_gnu_ld=$lt_save_with_gnu_ld ++lt_cv_path_LDCXX=$lt_cv_path_LD ++lt_cv_path_LD=$lt_save_path_LD ++lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld ++lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld + + else + tagname="" +@@ -13193,39 +14117,72 @@ + objext_F77=$objext + + # Code to be used in simple compile tests +-lt_simple_compile_test_code=" subroutine t\n return\n end\n" ++lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" + + # Code to be used in simple link tests +-lt_simple_link_test_code=" program t\n end\n" ++lt_simple_link_test_code="\ ++ program t ++ end ++" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + + # If no C compiler was specified, use CC. + LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ + # Allow CC to be a program name with arguments. + compiler=$CC + + ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm -r conftest* ++ ++ + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + CC=${F77-"f77"} + compiler=$CC + compiler_F77=$CC +-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ + +-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6 ++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. +-case "$host_os" in ++case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then +@@ -13233,21 +14190,21 @@ + postinstall_cmds='$RANLIB $lib' + fi + ;; +-aix4* | aix5*) +- test "$enable_shared" = yes && enable_static=no ++aix[4-9]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi + ;; + esac +-echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6 ++{ echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes +-echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6 +- +-test "$ld_shlibs_F77" = no && can_build_shared=no ++{ echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } + + GCC_F77="$G77" + LD_F77="$LD" +@@ -13256,8 +14213,8 @@ + lt_prog_compiler_pic_F77= + lt_prog_compiler_static_F77= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_F77='-Wl,' +@@ -13279,13 +14236,15 @@ + lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' + ;; + +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + +- mingw* | pw32* | os2*) ++ mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries + lt_prog_compiler_pic_F77='-DDLL_EXPORT' + ;; + +@@ -13295,6 +14254,11 @@ + lt_prog_compiler_pic_F77='-fno-common' + ;; + ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. +@@ -13311,7 +14275,7 @@ + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -13337,8 +14301,18 @@ + lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' + fi + ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic_F77='-qnocommon' ++ lt_prog_compiler_wl_F77='-Wl,' ++ ;; ++ esac ++ ;; + +- mingw* | pw32* | os2*) ++ mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_F77='-DDLL_EXPORT' +@@ -13348,7 +14322,7 @@ + lt_prog_compiler_wl_F77='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -13371,18 +14345,41 @@ + lt_prog_compiler_static_F77='-Bstatic' + ;; + +- linux*) +- case $CC in ++ linux* | k*bsd*-gnu) ++ case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-static' + ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_pic_F77='-fpic' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; + ccc*) + lt_prog_compiler_wl_F77='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_F77='-non_shared' + ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ lt_prog_compiler_wl_F77='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ lt_prog_compiler_wl_F77='' ++ ;; ++ esac ++ ;; + esac + ;; + +@@ -13392,15 +14389,19 @@ + lt_prog_compiler_static_F77='-non_shared' + ;; + +- sco3.2v5*) +- lt_prog_compiler_pic_F77='-Kpic' +- lt_prog_compiler_static_F77='-dn' ++ rdos*) ++ lt_prog_compiler_static_F77='-non_shared' + ;; + + solaris*) +- lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl_F77='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl_F77='-Wl,';; ++ esac + ;; + + sunos4*) +@@ -13409,7 +14410,7 @@ + lt_prog_compiler_static_F77='-Bstatic' + ;; + +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' +@@ -13422,6 +14423,17 @@ + fi + ;; + ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_can_build_shared_F77=no ++ ;; ++ + uts4*) + lt_prog_compiler_pic_F77='-pic' + lt_prog_compiler_static_F77='-Bstatic' +@@ -13433,22 +14445,22 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_F77"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6 +-if test "${lt_prog_compiler_pic_works_F77+set}" = set; then ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- lt_prog_compiler_pic_works_F77=no ++ lt_cv_prog_compiler_pic_works_F77=no + ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_F77" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. +@@ -13456,28 +14468,30 @@ + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13462: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:14474: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:13466: \$? = $ac_status" >&5 ++ echo "$as_me:14478: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- lt_prog_compiler_pic_works_F77=yes ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works_F77=yes + fi + fi + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_F77" >&6; } + +-if test x"$lt_prog_compiler_pic_works_F77" = xyes; then ++if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then + case $lt_prog_compiler_pic_F77 in + "" | " "*) ;; + *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; +@@ -13488,7 +14502,7 @@ + fi + + fi +-case "$host_os" in ++case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_F77= +@@ -13498,8 +14512,50 @@ + ;; + esac + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_static_works_F77=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works_F77=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works_F77=yes ++ fi ++ fi ++ $rm -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works_F77" >&6; } ++ ++if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then ++ : ++else ++ lt_prog_compiler_static_F77= ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -13508,7 +14564,7 @@ + mkdir conftest + cd conftest + mkdir out +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or +@@ -13516,23 +14572,25 @@ + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13522: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:14578: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:13526: \$? = $ac_status" >&5 ++ echo "$as_me:14582: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings +- if test ! -s out/conftest.err; then ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_F77=yes + fi + fi +- chmod u+w . ++ chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation +@@ -13543,23 +14601,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -13569,8 +14627,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag_F77= +@@ -13601,13 +14659,24 @@ + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. +- exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" ++ exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + case $host_os in + cygwin* | mingw* | pw32*) +@@ -13618,6 +14687,10 @@ + with_gnu_ld=no + fi + ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; + openbsd*) + with_gnu_ld=no + ;; +@@ -13628,9 +14701,30 @@ + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_F77='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec_F77= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ + # See if GNU ld supports shared libraries. + case $host_os in +- aix3* | aix4* | aix5*) ++ aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_F77=no +@@ -13678,10 +14772,10 @@ + allow_undefined_flag_F77=unsupported + always_export_symbols_F77=no + enable_shared_with_static_runtimes_F77=yes +- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +@@ -13690,13 +14784,69 @@ + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else +- ld_shlibs=no ++ ld_shlibs_F77=no ++ fi ++ ;; ++ ++ interix[3-9]*) ++ hardcode_direct_F77=no ++ hardcode_shlibpath_var_F77=no ++ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_F77='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ gnu* | linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ *) ++ tmp_sharedflag='-shared' ;; ++ esac ++ archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ link_all_deplibs_F77=no ++ else ++ ld_shlibs_F77=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -13706,7 +14856,7 @@ + fi + ;; + +- solaris* | sysv5*) ++ solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs_F77=no + cat <&2 +@@ -13727,6 +14877,33 @@ + fi + ;; + ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs_F77=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ esac ++ ;; ++ + sunos4*) + archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= +@@ -13734,31 +14911,6 @@ + hardcode_shlibpath_var_F77=no + ;; + +- linux*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_cmds_F77="$tmp_archive_cmds" +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ +-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +-$echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- else +- archive_expsym_cmds_F77="$tmp_archive_cmds" +- fi +- else +- ld_shlibs_F77=no +- fi +- ;; +- + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +@@ -13769,16 +14921,11 @@ + ;; + esac + +- if test "$ld_shlibs_F77" = yes; then +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_F77='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_F77= +- fi ++ if test "$ld_shlibs_F77" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec_F77= ++ export_dynamic_flag_spec_F77= ++ whole_archive_flag_spec_F77= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) +@@ -13790,14 +14937,14 @@ + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_F77=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_F77=unsupported + fi + ;; + +- aix4* | aix5*) ++ aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. +@@ -13817,13 +14964,14 @@ + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done ++ ;; + esac + + exp_sym_flag='-bexport' +@@ -13842,7 +14990,7 @@ + link_all_deplibs_F77=yes + + if test "$GCC" = yes; then +- case $host_os in aix4.012|aix4.012.*) ++ case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` +@@ -13850,7 +14998,7 @@ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 +- hardcode_direct_F77=yes ++ : + else + # We have old collect2 + hardcode_direct_F77=unsupported +@@ -13861,8 +15009,12 @@ + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_libdir_separator_F77= + fi ++ ;; + esac + shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi + else + # not using gcc + if test "$host_cpu" = ia64; then +@@ -13870,11 +15022,11 @@ + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else +- if test "$aix_use_runtimelinking" = yes; then ++ if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' +- fi ++ fi + fi + fi + +@@ -13892,49 +15044,54 @@ + end + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'` ++ (exit $ac_status); } && { ++ test -z "$ac_f77_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'`; fi ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_F77="-z nodefs" +- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" ++ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +@@ -13943,39 +15100,44 @@ + end + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'` ++ (exit $ac_status); } && { ++ test -z "$ac_f77_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'`; fi ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -13984,13 +15146,11 @@ + # -berok will link without error, but may produce a broken library. + no_undefined_flag_F77=' ${wl}-bernotok' + allow_undefined_flag_F77=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- always_export_symbols_F77=yes + # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_F77=' ' ++ whole_archive_flag_spec_F77='$convenience' + archive_cmds_need_lc_F77=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; +@@ -14003,7 +15163,7 @@ + ld_shlibs_F77=no + ;; + +- bsdi4*) ++ bsdi[45]*) + export_dynamic_flag_spec_F77=-rdynamic + ;; + +@@ -14023,58 +15183,57 @@ + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds_F77='true' + # FIXME: Should let the user specify the lib program. +- old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' ++ old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path_F77='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_F77=yes + ;; + + darwin* | rhapsody*) +- if test "$GXX" = yes ; then +- archive_cmds_need_lc_F77=no +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_F77='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_F77='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_F77='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- allow_undefined_flag_F77='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; + esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_cmds_F77='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- module_cmds_F77='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ archive_cmds_need_lc_F77=no + hardcode_direct_F77=no + hardcode_automatic_F77=yes + hardcode_shlibpath_var_F77=unsupported +- whole_archive_flag_spec_F77='-all_load $convenience' ++ whole_archive_flag_spec_F77='' + link_all_deplibs_F77=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + else +- ld_shlibs_F77=no ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' ++ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs_F77=no ++ ;; ++ esac + fi + ;; + +@@ -14108,7 +15267,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes +@@ -14131,47 +15290,62 @@ + export_dynamic_flag_spec_F77='${wl}-E' + ;; + +- hpux10* | hpux11*) ++ hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*|ia64*) ++ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ ++ hardcode_direct_F77=yes ++ export_dynamic_flag_spec_F77='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_F77=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) + archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; ++ ia64*) ++ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; + *) + archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*) +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' ++ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) + hardcode_libdir_flag_spec_ld_F77='+b $libdir' +- hardcode_libdir_separator_F77=: +- hardcode_direct_F77=no +- hardcode_shlibpath_var_F77=no +- ;; +- ia64*) +- hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_direct_F77=no + hardcode_shlibpath_var_F77=no +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_F77=yes + ;; + *) +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_F77=: + hardcode_direct_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + +@@ -14195,7 +15369,7 @@ + link_all_deplibs_F77=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -14215,23 +15389,28 @@ + ;; + + openbsd*) +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_F77='${wl}-E' ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_F77='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ ;; ++ *) ++ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi + else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_F77='-R$libdir' +- ;; +- *) +- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' +- ;; +- esac ++ ld_shlibs_F77=no + fi + ;; + +@@ -14264,7 +15443,7 @@ + allow_undefined_flag_F77=' -expect_unresolved \*' + archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_F77='-rpath $libdir' +@@ -14272,21 +15451,15 @@ + hardcode_libdir_separator_F77=: + ;; + +- sco3.2v5*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_F77=no +- export_dynamic_flag_spec_F77='${wl}-Bexport' +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; +- + solaris*) + no_undefined_flag_F77=' -z text' + if test "$GCC" = yes; then ++ wlarc='${wl}' + archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else ++ wlarc='' + archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +@@ -14295,8 +15468,17 @@ + hardcode_shlibpath_var_F77=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ++ fi ++ ;; + esac + link_all_deplibs_F77=yes + ;; +@@ -14353,36 +15535,45 @@ + fi + ;; + +- sysv4.2uw2*) +- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes +- hardcode_minus_L_F77=no ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag_F77='${wl}-z,text' ++ archive_cmds_need_lc_F77=no + hardcode_shlibpath_var_F77=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; ++ runpath_var='LD_RUN_PATH' + +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) +- no_undefined_flag_F77='${wl}-z ${wl}text' + if test "$GCC" = yes; then +- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else +- archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var_F77=no + ;; + +- sysv5*) +- no_undefined_flag_F77=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec_F77= ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag_F77='${wl}-z,text' ++ allow_undefined_flag_F77='${wl}-z,nodefs' ++ archive_cmds_need_lc_F77=no + hardcode_shlibpath_var_F77=no ++ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator_F77=':' ++ link_all_deplibs_F77=yes ++ export_dynamic_flag_spec_F77='${wl}-Bexport' + runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi + ;; + + uts4*) +@@ -14397,15 +15588,10 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 +-echo "${ECHO_T}$ld_shlibs_F77" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 ++echo "${ECHO_T}$ld_shlibs_F77" >&6; } + test "$ld_shlibs_F77" = no && can_build_shared=no + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +- + # + # Do we need to explicitly link libc? + # +@@ -14423,10 +15609,10 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 +@@ -14438,6 +15624,7 @@ + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_F77 ++ pic_flag=$lt_prog_compiler_pic_F77 + compiler_flags=-v + linker_flags=-v + verstring= +@@ -14460,16 +15647,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -14483,20 +15670,7 @@ + version_type=none + dynamic_linker="$host_os ld.so" + sys_lib_dlsearch_path_spec="/lib /usr/lib" +-if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +-else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +-fi ++ + need_lib_prefix=unknown + hardcode_into_libs=no + +@@ -14514,7 +15688,7 @@ + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +-aix4* | aix5*) ++aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -14570,7 +15744,7 @@ + shlibpath_var=LIBRARY_PATH + ;; + +-bsdi4*) ++bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -14598,7 +15772,8 @@ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname' ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' +@@ -14628,7 +15803,7 @@ + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; +@@ -14651,13 +15826,8 @@ + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' +- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. +- if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` +- else +- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' +- fi ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +@@ -14674,22 +15844,19 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +- version_type=freebsd-$objformat +- case $version_type in ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no +@@ -14705,14 +15872,19 @@ + freebsd2*) + shlibpath_overrides_runpath=yes + ;; +- freebsd3.01* | freebsdelf3.01*) ++ freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; +- *) # from 3.2 on ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + esac + ;; + +@@ -14732,7 +15904,7 @@ + version_type=sunos + need_lib_prefix=no + need_version=no +- case "$host_cpu" in ++ case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes +@@ -14772,6 +15944,18 @@ + postinstall_cmds='chmod 555 $lib' + ;; + ++interix[3-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ + irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; +@@ -14815,7 +15999,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -14829,31 +16013,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 14836 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -14865,7 +16028,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -14874,7 +16037,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -14914,8 +16077,13 @@ + + openbsd*) + version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no +- need_version=yes ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH +@@ -14953,11 +16121,8 @@ + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH ++rdos*) ++ dynamic_linker=no + ;; + + solaris*) +@@ -14985,7 +16150,7 @@ + need_version=yes + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' +@@ -15018,6 +16183,29 @@ + fi + ;; + ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ + uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -15029,16 +16217,36 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" ++fi ++ ++sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" ++fi ++ ++sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_F77= + if test -n "$hardcode_libdir_flag_spec_F77" || \ +- test -n "$runpath_var F77" || \ +- test "X$hardcode_automatic_F77"="Xyes" ; then ++ test -n "$runpath_var_F77" || \ ++ test "X$hardcode_automatic_F77" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_F77" != no && +@@ -15058,8 +16266,8 @@ + # directories. + hardcode_action_F77=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 +-echo "${ECHO_T}$hardcode_action_F77" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 ++echo "${ECHO_T}$hardcode_action_F77" >&6; } + + if test "$hardcode_action_F77" = relink; then + # Fast installation is not supported +@@ -15070,36 +16278,6 @@ + enable_fast_install=needless + fi + +-striplib= +-old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +- else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- ;; +- *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +- ;; +- esac +-fi +- +- + + # The else clause should only fire when bootstrapping the + # libtool distribution, otherwise you forgot to ship ltmain.sh +@@ -15114,7 +16292,7 @@ + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +@@ -15141,6 +16319,7 @@ + predeps_F77 \ + postdeps_F77 \ + compiler_lib_search_path_F77 \ ++ compiler_lib_search_dirs_F77 \ + archive_cmds_F77 \ + archive_expsym_cmds_F77 \ + postinstall_cmds_F77 \ +@@ -15156,6 +16335,7 @@ + module_cmds_F77 \ + module_expsym_cmds_F77 \ + lt_cv_prog_compiler_c_o_F77 \ ++ fix_srcfile_path_F77 \ + exclude_expsyms_F77 \ + include_expsyms_F77; do + +@@ -15215,6 +16395,12 @@ + # The host system. + host_alias=$host_alias + host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + + # An echo program that does not interpret backslashes. + echo=$lt_echo +@@ -15226,6 +16412,9 @@ + # A C compiler. + LTCC=$lt_LTCC + ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ + # A language-specific compiler. + CC=$lt_compiler_F77 + +@@ -15291,7 +16480,7 @@ + # Does compiler simultaneously support -c and -o options? + compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 + +-# Must we lock files when doing compilation ? ++# Must we lock files when doing compilation? + need_locks=$lt_need_locks + + # Do we need the lib prefix for modules? +@@ -15379,6 +16568,10 @@ + # shared library. + postdeps=$lt_postdeps_F77 + ++# The directories searched by this compiler when creating a shared ++# library ++compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77 ++ + # The library search path used internally by the compiler when linking + # a shared library. + compiler_lib_search_path=$lt_compiler_lib_search_path_F77 +@@ -15467,7 +16660,7 @@ + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + + # Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path_F77" ++fix_srcfile_path=$lt_fix_srcfile_path + + # Set to yes if exported symbols are required. + always_export_symbols=$always_export_symbols_F77 +@@ -15517,7 +16710,6 @@ + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + + +- + # Source file extension for Java test sources. + ac_ext=java + +@@ -15526,29 +16718,58 @@ + objext_GCJ=$objext + + # Code to be used in simple compile tests +-lt_simple_compile_test_code="class foo {}\n" ++lt_simple_compile_test_code="class foo {}" + + # Code to be used in simple link tests +-lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }\n' ++lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + + # If no C compiler was specified, use CC. + LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ + # Allow CC to be a program name with arguments. + compiler=$CC + + ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm -r conftest* ++ ++ + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + CC=${GCJ-"gcj"} + compiler=$CC + compiler_GCJ=$CC ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ + + # GCJ did not exist at the time GCC didn't implicitly link libc in. + archive_cmds_need_lc_GCJ=no + ++old_archive_cmds_GCJ=$old_archive_cmds ++ + + lt_prog_compiler_no_builtin_flag_GCJ= + +@@ -15556,14 +16777,14 @@ + lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + + +-echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. +@@ -15571,26 +16792,28 @@ + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:15577: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:16798: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:15581: \$? = $ac_status" >&5 ++ echo "$as_me:16802: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" +@@ -15604,8 +16827,8 @@ + lt_prog_compiler_pic_GCJ= + lt_prog_compiler_static_GCJ= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_GCJ='-Wl,' +@@ -15627,14 +16850,16 @@ + lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' + ;; + +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + +- mingw* | pw32* | os2*) ++ mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ + ;; + + darwin* | rhapsody*) +@@ -15643,6 +16868,11 @@ + lt_prog_compiler_pic_GCJ='-fno-common' + ;; + ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. +@@ -15659,7 +16889,7 @@ + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -15685,18 +16915,28 @@ + lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' + fi + ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic_GCJ='-qnocommon' ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ ;; ++ esac ++ ;; + +- mingw* | pw32* | os2*) ++ mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' ++ + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl_GCJ='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -15719,18 +16959,41 @@ + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + +- linux*) +- case $CC in ++ linux* | k*bsd*-gnu) ++ case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-static' + ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_pic_GCJ='-fpic' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; + ccc*) + lt_prog_compiler_wl_GCJ='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_GCJ='-non_shared' + ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ lt_prog_compiler_wl_GCJ='' ++ ;; ++ esac ++ ;; + esac + ;; + +@@ -15740,15 +17003,19 @@ + lt_prog_compiler_static_GCJ='-non_shared' + ;; + +- sco3.2v5*) +- lt_prog_compiler_pic_GCJ='-Kpic' +- lt_prog_compiler_static_GCJ='-dn' ++ rdos*) ++ lt_prog_compiler_static_GCJ='-non_shared' + ;; + + solaris*) +- lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl_GCJ='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl_GCJ='-Wl,';; ++ esac + ;; + + sunos4*) +@@ -15757,7 +17024,7 @@ + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' +@@ -15770,6 +17037,17 @@ + fi + ;; + ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_can_build_shared_GCJ=no ++ ;; ++ + uts4*) + lt_prog_compiler_pic_GCJ='-pic' + lt_prog_compiler_static_GCJ='-Bstatic' +@@ -15781,22 +17059,22 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_GCJ"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6 +-if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- lt_prog_compiler_pic_works_GCJ=no ++ lt_cv_prog_compiler_pic_works_GCJ=no + ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_GCJ" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. +@@ -15804,28 +17082,30 @@ + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:15810: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:17088: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:15814: \$? = $ac_status" >&5 ++ echo "$as_me:17092: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- lt_prog_compiler_pic_works_GCJ=yes ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works_GCJ=yes + fi + fi + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_GCJ" >&6; } + +-if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then ++if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then + case $lt_prog_compiler_pic_GCJ in + "" | " "*) ;; + *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; +@@ -15836,7 +17116,7 @@ + fi + + fi +-case "$host_os" in ++case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_GCJ= +@@ -15846,8 +17126,50 @@ + ;; + esac + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_static_works_GCJ=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works_GCJ=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works_GCJ=yes ++ fi ++ fi ++ $rm -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works_GCJ" >&6; } ++ ++if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then ++ : ++else ++ lt_prog_compiler_static_GCJ= ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -15856,7 +17178,7 @@ + mkdir conftest + cd conftest + mkdir out +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or +@@ -15864,23 +17186,25 @@ + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:15870: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:17192: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:15874: \$? = $ac_status" >&5 ++ echo "$as_me:17196: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings +- if test ! -s out/conftest.err; then ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_GCJ=yes + fi + fi +- chmod u+w . ++ chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation +@@ -15891,23 +17215,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -15917,8 +17241,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag_GCJ= +@@ -15949,13 +17273,24 @@ + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. +- exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" ++ exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + case $host_os in + cygwin* | mingw* | pw32*) +@@ -15966,6 +17301,10 @@ + with_gnu_ld=no + fi + ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; + openbsd*) + with_gnu_ld=no + ;; +@@ -15976,9 +17315,30 @@ + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec_GCJ= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ + # See if GNU ld supports shared libraries. + case $host_os in +- aix3* | aix4* | aix5*) ++ aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_GCJ=no +@@ -16026,10 +17386,10 @@ + allow_undefined_flag_GCJ=unsupported + always_export_symbols_GCJ=no + enable_shared_with_static_runtimes_GCJ=yes +- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +@@ -16038,13 +17398,69 @@ + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else +- ld_shlibs=no ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ ++ interix[3-9]*) ++ hardcode_direct_GCJ=no ++ hardcode_shlibpath_var_GCJ=no ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ gnu* | linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ *) ++ tmp_sharedflag='-shared' ;; ++ esac ++ archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ link_all_deplibs_GCJ=no ++ else ++ ld_shlibs_GCJ=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -16054,7 +17470,7 @@ + fi + ;; + +- solaris* | sysv5*) ++ solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs_GCJ=no + cat <&2 +@@ -16075,6 +17491,33 @@ + fi + ;; + ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs_GCJ=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ esac ++ ;; ++ + sunos4*) + archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= +@@ -16082,31 +17525,6 @@ + hardcode_shlibpath_var_GCJ=no + ;; + +- linux*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_cmds_GCJ="$tmp_archive_cmds" +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ +-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +-$echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- else +- archive_expsym_cmds_GCJ="$tmp_archive_cmds" +- fi +- else +- ld_shlibs_GCJ=no +- fi +- ;; +- + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +@@ -16117,16 +17535,11 @@ + ;; + esac + +- if test "$ld_shlibs_GCJ" = yes; then +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_GCJ= +- fi ++ if test "$ld_shlibs_GCJ" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec_GCJ= ++ export_dynamic_flag_spec_GCJ= ++ whole_archive_flag_spec_GCJ= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) +@@ -16138,14 +17551,14 @@ + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_GCJ=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_GCJ=unsupported + fi + ;; + +- aix4* | aix5*) ++ aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. +@@ -16165,13 +17578,14 @@ + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done ++ ;; + esac + + exp_sym_flag='-bexport' +@@ -16190,7 +17604,7 @@ + link_all_deplibs_GCJ=yes + + if test "$GCC" = yes; then +- case $host_os in aix4.012|aix4.012.*) ++ case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` +@@ -16198,7 +17612,7 @@ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 +- hardcode_direct_GCJ=yes ++ : + else + # We have old collect2 + hardcode_direct_GCJ=unsupported +@@ -16209,8 +17623,12 @@ + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_libdir_separator_GCJ= + fi ++ ;; + esac + shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi + else + # not using gcc + if test "$host_cpu" = ia64; then +@@ -16218,11 +17636,11 @@ + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else +- if test "$aix_use_runtimelinking" = yes; then ++ if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' +- fi ++ fi + fi + fi + +@@ -16250,49 +17668,54 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'`; fi ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_GCJ="-z nodefs" +- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" ++ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +@@ -16311,39 +17734,44 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'` ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +-}'`; fi ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -16352,13 +17780,11 @@ + # -berok will link without error, but may produce a broken library. + no_undefined_flag_GCJ=' ${wl}-bernotok' + allow_undefined_flag_GCJ=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- always_export_symbols_GCJ=yes + # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_GCJ=' ' ++ whole_archive_flag_spec_GCJ='$convenience' + archive_cmds_need_lc_GCJ=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; +@@ -16371,7 +17797,7 @@ + ld_shlibs_GCJ=no + ;; + +- bsdi4*) ++ bsdi[45]*) + export_dynamic_flag_spec_GCJ=-rdynamic + ;; + +@@ -16391,58 +17817,57 @@ + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds_GCJ='true' + # FIXME: Should let the user specify the lib program. +- old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' ++ old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_GCJ=yes + ;; + + darwin* | rhapsody*) +- if test "$GXX" = yes ; then +- archive_cmds_need_lc_GCJ=no +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_GCJ='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- allow_undefined_flag_GCJ='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; + esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_cmds_GCJ='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- module_cmds_GCJ='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ archive_cmds_need_lc_GCJ=no + hardcode_direct_GCJ=no + hardcode_automatic_GCJ=yes + hardcode_shlibpath_var_GCJ=unsupported +- whole_archive_flag_spec_GCJ='-all_load $convenience' ++ whole_archive_flag_spec_GCJ='' + link_all_deplibs_GCJ=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + else +- ld_shlibs_GCJ=no ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' ++ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs_GCJ=no ++ ;; ++ esac + fi + ;; + +@@ -16476,7 +17901,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes +@@ -16499,47 +17924,62 @@ + export_dynamic_flag_spec_GCJ='${wl}-E' + ;; + +- hpux10* | hpux11*) ++ hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*|ia64*) ++ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ ++ hardcode_direct_GCJ=yes ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_GCJ=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) + archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; ++ ia64*) ++ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; + *) + archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*) +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' ++ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) + hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' +- hardcode_libdir_separator_GCJ=: +- hardcode_direct_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- ;; +- ia64*) +- hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_direct_GCJ=no + hardcode_shlibpath_var_GCJ=no +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_GCJ=yes + ;; + *) +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: + hardcode_direct_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + +@@ -16563,7 +18003,7 @@ + link_all_deplibs_GCJ=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -16583,23 +18023,28 @@ + ;; + + openbsd*) +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_GCJ='${wl}-E' ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ ;; ++ *) ++ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi + else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- ;; +- *) +- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' +- ;; +- esac ++ ld_shlibs_GCJ=no + fi + ;; + +@@ -16632,7 +18077,7 @@ + allow_undefined_flag_GCJ=' -expect_unresolved \*' + archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_GCJ='-rpath $libdir' +@@ -16640,21 +18085,15 @@ + hardcode_libdir_separator_GCJ=: + ;; + +- sco3.2v5*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_GCJ=no +- export_dynamic_flag_spec_GCJ='${wl}-Bexport' +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; +- + solaris*) + no_undefined_flag_GCJ=' -z text' + if test "$GCC" = yes; then ++ wlarc='${wl}' + archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else ++ wlarc='' + archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +@@ -16663,8 +18102,17 @@ + hardcode_shlibpath_var_GCJ=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ++ fi ++ ;; + esac + link_all_deplibs_GCJ=yes + ;; +@@ -16721,36 +18169,45 @@ + fi + ;; + +- sysv4.2uw2*) +- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes +- hardcode_minus_L_GCJ=no ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag_GCJ='${wl}-z,text' ++ archive_cmds_need_lc_GCJ=no + hardcode_shlibpath_var_GCJ=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; ++ runpath_var='LD_RUN_PATH' + +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) +- no_undefined_flag_GCJ='${wl}-z ${wl}text' + if test "$GCC" = yes; then +- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else +- archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var_GCJ=no + ;; + +- sysv5*) +- no_undefined_flag_GCJ=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec_GCJ= ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag_GCJ='${wl}-z,text' ++ allow_undefined_flag_GCJ='${wl}-z,nodefs' ++ archive_cmds_need_lc_GCJ=no + hardcode_shlibpath_var_GCJ=no ++ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator_GCJ=':' ++ link_all_deplibs_GCJ=yes ++ export_dynamic_flag_spec_GCJ='${wl}-Bexport' + runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi + ;; + + uts4*) +@@ -16765,15 +18222,10 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 +-echo "${ECHO_T}$ld_shlibs_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 ++echo "${ECHO_T}$ld_shlibs_GCJ" >&6; } + test "$ld_shlibs_GCJ" = no && can_build_shared=no + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +- + # + # Do we need to explicitly link libc? + # +@@ -16791,10 +18243,10 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 +@@ -16806,6 +18258,7 @@ + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_GCJ ++ pic_flag=$lt_prog_compiler_pic_GCJ + compiler_flags=-v + linker_flags=-v + verstring= +@@ -16828,16 +18281,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -16851,20 +18304,7 @@ + version_type=none + dynamic_linker="$host_os ld.so" + sys_lib_dlsearch_path_spec="/lib /usr/lib" +-if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +-else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +-fi ++ + need_lib_prefix=unknown + hardcode_into_libs=no + +@@ -16882,7 +18322,7 @@ + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +-aix4* | aix5*) ++aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -16938,7 +18378,7 @@ + shlibpath_var=LIBRARY_PATH + ;; + +-bsdi4*) ++bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -16966,7 +18406,8 @@ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname' ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' +@@ -16996,7 +18437,7 @@ + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; +@@ -17019,13 +18460,8 @@ + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' +- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. +- if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` +- else +- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' +- fi ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +@@ -17042,20 +18478,17 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) +@@ -17073,14 +18506,19 @@ + freebsd2*) + shlibpath_overrides_runpath=yes + ;; +- freebsd3.01* | freebsdelf3.01*) ++ freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; +- *) # from 3.2 on ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + esac + ;; + +@@ -17100,7 +18538,7 @@ + version_type=sunos + need_lib_prefix=no + need_version=no +- case "$host_cpu" in ++ case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes +@@ -17140,6 +18578,18 @@ + postinstall_cmds='chmod 555 $lib' + ;; + ++interix[3-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ + irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; +@@ -17175,1102 +18625,291 @@ + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes +- ;; +- +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; +- +-# This must be Linux ELF. +-linux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes +- +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 17204 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" +- fi +- +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; +- +-knetbsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-openbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=yes +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; +- +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; +- +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; +- +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; +- +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; +- +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; +- +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; +- +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-*) +- dynamic_linker=no +- ;; +-esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 +-test "$dynamic_linker" = no && can_build_shared=no +- +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +-hardcode_action_GCJ= +-if test -n "$hardcode_libdir_flag_spec_GCJ" || \ +- test -n "$runpath_var GCJ" || \ +- test "X$hardcode_automatic_GCJ"="Xyes" ; then +- +- # We can hardcode non-existant directories. +- if test "$hardcode_direct_GCJ" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && +- test "$hardcode_minus_L_GCJ" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action_GCJ=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action_GCJ=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action_GCJ=unsupported +-fi +-echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +-echo "${ECHO_T}$hardcode_action_GCJ" >&6 +- +-if test "$hardcode_action_GCJ" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi +- +-striplib= +-old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +- else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- ;; +- *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +- ;; +- esac +-fi +- +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= +- +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; +- +- mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; +- +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; +- +- darwin*) +- # if libdl is installed we need to link against it +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- +-fi +- +- ;; +- +- *) +- echo "$as_me:$LINENO: checking for shl_load" >&5 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +-if test "${ac_cv_func_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shl_load to an innocuous variant, in case declares shl_load. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shl_load innocuous_shl_load +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shl_load (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef shl_load +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shl_load) || defined (__stub___shl_load) +-choke me +-#else +-char (*f) () = shl_load; +-#endif +-#ifdef __cplusplus +-} +-#endif +- +-int +-main () +-{ +-return f != shl_load; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_func_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +-if test $ac_cv_func_shl_load = yes; then +- lt_cv_dlopen="shl_load" +-else +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-int +-main () +-{ +-shl_load (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_lib_dld_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +-if test $ac_cv_lib_dld_shl_load = yes; then +- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +-else +- echo "$as_me:$LINENO: checking for dlopen" >&5 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +-if test "${ac_cv_func_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define dlopen to an innocuous variant, in case declares dlopen. +- For example, HP-UX 11i declares gettimeofday. */ +-#define dlopen innocuous_dlopen +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char dlopen (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef dlopen +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_dlopen) || defined (__stub___dlopen) +-choke me +-#else +-char (*f) () = dlopen; +-#endif +-#ifdef __cplusplus +-} +-#endif +- +-int +-main () +-{ +-return f != dlopen; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_func_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +-if test $ac_cv_func_dlopen = yes; then +- lt_cv_dlopen="dlopen" +-else +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +-if test "${ac_cv_lib_svld_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lsvld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_svld_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_lib_svld_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +-if test $ac_cv_lib_svld_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +-else +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_dld_link+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dld_link (); +-int +-main () +-{ +-dld_link (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_dld_link=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_lib_dld_dld_link=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +-if test $ac_cv_lib_dld_dld_link = yes; then +- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +-fi +- +- +-fi +- +- +-fi +- +- +-fi ++ ;; + ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; + +-fi ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes + ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi + +-fi ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; + +- ;; +- esac ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; + +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' + else +- enable_dlopen=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' + fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +- +- save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; + +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; + +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; + +-#include ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif ++rdos*) ++ dynamic_linker=no ++ ;; + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; + esac +- else : +- # compilation failed +- lt_cv_dlopen_self=no + fi +-fi +-rm -fr conftest* ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; + ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6 ++*) ++ dynamic_linker=no ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } ++test "$dynamic_linker" = no && can_build_shared=no + +- if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self_static+set}" = set; then ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self_static=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif +- +-#include +- +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif +- +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif +- +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif +- +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; +- +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } ++ lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" ++fi + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self_static=no +- fi ++sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" + fi +-rm -fr conftest* + ++sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 +- fi + +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } ++hardcode_action_GCJ= ++if test -n "$hardcode_libdir_flag_spec_GCJ" || \ ++ test -n "$runpath_var_GCJ" || \ ++ test "X$hardcode_automatic_GCJ" = "Xyes" ; then + +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac ++ # We can hardcode non-existant directories. ++ if test "$hardcode_direct_GCJ" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && ++ test "$hardcode_minus_L_GCJ" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action_GCJ=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action_GCJ=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action_GCJ=unsupported ++fi ++{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 ++echo "${ECHO_T}$hardcode_action_GCJ" >&6; } + +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac ++if test "$hardcode_action_GCJ" = relink; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless + fi + + +@@ -18287,7 +18926,7 @@ + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +@@ -18314,6 +18953,7 @@ + predeps_GCJ \ + postdeps_GCJ \ + compiler_lib_search_path_GCJ \ ++ compiler_lib_search_dirs_GCJ \ + archive_cmds_GCJ \ + archive_expsym_cmds_GCJ \ + postinstall_cmds_GCJ \ +@@ -18329,6 +18969,7 @@ + module_cmds_GCJ \ + module_expsym_cmds_GCJ \ + lt_cv_prog_compiler_c_o_GCJ \ ++ fix_srcfile_path_GCJ \ + exclude_expsyms_GCJ \ + include_expsyms_GCJ; do + +@@ -18388,6 +19029,12 @@ + # The host system. + host_alias=$host_alias + host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + + # An echo program that does not interpret backslashes. + echo=$lt_echo +@@ -18399,6 +19046,9 @@ + # A C compiler. + LTCC=$lt_LTCC + ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ + # A language-specific compiler. + CC=$lt_compiler_GCJ + +@@ -18464,7 +19114,7 @@ + # Does compiler simultaneously support -c and -o options? + compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ + +-# Must we lock files when doing compilation ? ++# Must we lock files when doing compilation? + need_locks=$lt_need_locks + + # Do we need the lib prefix for modules? +@@ -18552,6 +19202,10 @@ + # shared library. + postdeps=$lt_postdeps_GCJ + ++# The directories searched by this compiler when creating a shared ++# library ++compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ ++ + # The library search path used internally by the compiler when linking + # a shared library. + compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ +@@ -18640,7 +19294,7 @@ + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + + # Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path_GCJ" ++fix_srcfile_path=$lt_fix_srcfile_path + + # Set to yes if exported symbols are required. + always_export_symbols=$always_export_symbols_GCJ +@@ -18689,7 +19343,6 @@ + RC) + + +- + # Source file extension for RC test sources. + ac_ext=rc + +@@ -18698,7 +19351,7 @@ + objext_RC=$objext + + # Code to be used in simple compile tests +-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' ++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + + # Code to be used in simple link tests + lt_simple_link_test_code="$lt_simple_compile_test_code" +@@ -18708,15 +19361,42 @@ + # If no C compiler was specified, use CC. + LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ + # Allow CC to be a program name with arguments. + compiler=$CC + + ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm -r conftest* ++ ++ + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + CC=${RC-"windres"} + compiler=$CC + compiler_RC=$CC ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ + lt_cv_prog_compiler_c_o_RC=yes + + # The else clause should only fire when bootstrapping the +@@ -18732,7 +19412,7 @@ + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +@@ -18759,6 +19439,7 @@ + predeps_RC \ + postdeps_RC \ + compiler_lib_search_path_RC \ ++ compiler_lib_search_dirs_RC \ + archive_cmds_RC \ + archive_expsym_cmds_RC \ + postinstall_cmds_RC \ +@@ -18774,6 +19455,7 @@ + module_cmds_RC \ + module_expsym_cmds_RC \ + lt_cv_prog_compiler_c_o_RC \ ++ fix_srcfile_path_RC \ + exclude_expsyms_RC \ + include_expsyms_RC; do + +@@ -18833,6 +19515,12 @@ + # The host system. + host_alias=$host_alias + host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + + # An echo program that does not interpret backslashes. + echo=$lt_echo +@@ -18844,6 +19532,9 @@ + # A C compiler. + LTCC=$lt_LTCC + ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ + # A language-specific compiler. + CC=$lt_compiler_RC + +@@ -18909,7 +19600,7 @@ + # Does compiler simultaneously support -c and -o options? + compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC + +-# Must we lock files when doing compilation ? ++# Must we lock files when doing compilation? + need_locks=$lt_need_locks + + # Do we need the lib prefix for modules? +@@ -18997,6 +19688,10 @@ + # shared library. + postdeps=$lt_postdeps_RC + ++# The directories searched by this compiler when creating a shared ++# library ++compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC ++ + # The library search path used internally by the compiler when linking + # a shared library. + compiler_lib_search_path=$lt_compiler_lib_search_path_RC +@@ -19085,7 +19780,7 @@ + sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + + # Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path_RC" ++fix_srcfile_path=$lt_fix_srcfile_path + + # Set to yes if exported symbols are required. + always_export_symbols=$always_export_symbols_RC +@@ -19190,8 +19885,8 @@ + DARWIN_API=0 + BSD_API=0 + +-echo "$as_me:$LINENO: checking for what USB OS support" >&5 +-echo $ECHO_N "checking for what USB OS support... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for what USB OS support" >&5 ++echo $ECHO_N "checking for what USB OS support... $ECHO_C" >&6; } + case $host in + *-linux*) + cat >>confdefs.h <<\_ACEOF +@@ -19208,8 +19903,8 @@ + + LINUX_API=1 + os_support=linux +- echo "$as_me:$LINENO: result: Linux" >&5 +-echo "${ECHO_T}Linux" >&6 ++ { echo "$as_me:$LINENO: result: Linux" >&5 ++echo "${ECHO_T}Linux" >&6; } + OSLIBS="" + ;; + *-freebsd*|*-kfreebsd*-gnu|*-openbsd*|*-netbsd*) +@@ -19227,8 +19922,8 @@ + + BSD_API=1 + os_support=bsd +- echo "$as_me:$LINENO: result: FreeBSD" >&5 +-echo "${ECHO_T}FreeBSD" >&6 ++ { echo "$as_me:$LINENO: result: FreeBSD" >&5 ++echo "${ECHO_T}FreeBSD" >&6; } + OSLIBS="" + ;; + *-darwin*) +@@ -19246,13 +19941,13 @@ + + DARWIN_API=1 + os_support=darwin +- echo "$as_me:$LINENO: result: Darwin and/or MacOS 10" >&5 +-echo "${ECHO_T}Darwin and/or MacOS 10" >&6 ++ { echo "$as_me:$LINENO: result: Darwin and/or MacOS 10" >&5 ++echo "${ECHO_T}Darwin and/or MacOS 10" >&6; } + OSLIBS="-Wl,-framework -Wl,IOKit -Wl,-framework -Wl,CoreFoundation -Wl,-prebind" + ;; + *) +- echo "$as_me:$LINENO: result: unknown operating system" >&5 +-echo "${ECHO_T}unknown operating system" >&6 ++ { echo "$as_me:$LINENO: result: unknown operating system" >&5 ++echo "${ECHO_T}unknown operating system" >&6; } + { { echo "$as_me:$LINENO: error: libusb does not support compiling for $host" >&5 + echo "$as_me: error: libusb does not support compiling for $host" >&2;} + { (exit 1); exit 1; }; } +@@ -19263,9 +19958,7 @@ + + + +- +- +-if test "$os_support" = "linux"; then ++ if test "$os_support" = "linux"; then + LINUX_API_TRUE= + LINUX_API_FALSE='#' + else +@@ -19273,9 +19966,7 @@ + LINUX_API_FALSE= + fi + +- +- +-if test "$os_support" = "bsd"; then ++ if test "$os_support" = "bsd"; then + BSD_API_TRUE= + BSD_API_FALSE='#' + else +@@ -19283,9 +19974,7 @@ + BSD_API_FALSE= + fi + +- +- +-if test "$os_support" = "darwin"; then ++ if test "$os_support" = "darwin"; then + DARWIN_API_TRUE= + DARWIN_API_FALSE='#' + else +@@ -19302,20 +19991,20 @@ + debug_default=minimum + fi + +-# Check whether --enable-debug or --disable-debug was given. ++# Check whether --enable-debug was given. + if test "${enable_debug+set}" = set; then +- enableval="$enable_debug" +- ++ enableval=$enable_debug; + else + enable_debug=$debug_default +-fi; ++fi ++ + + if test "x$enable_debug" = "xyes"; then + test "$cflags_set" = set || CFLAGS="$CFLAGS -g" + fi + + # Checks for programs. +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -19329,8 +20018,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19343,32 +20032,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19381,36 +20072,51 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + else + CC="$ac_cv_prog_CC" + fi + + if test -z "$CC"; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19423,74 +20129,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- +-fi +-if test -z "$ac_cv_prog_CC"; then +- ac_ct_CC=$CC +- # Extract the first word of "cc", so it can be a program name with args. +-set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_CC"; then +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +- +-fi +-fi +-ac_ct_CC=$ac_cv_prog_ac_ct_CC +-if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC +-else +- CC="$ac_cv_prog_CC" +-fi + ++ fi + fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19504,7 +20170,7 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue +@@ -19515,6 +20181,7 @@ + fi + done + done ++IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. +@@ -19532,22 +20199,23 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19560,36 +20228,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$CC" && break + done + fi + if test -z "$CC"; then + ac_ct_CC=$CC +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19602,29 +20272,45 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_CC" && break + done + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + fi + + fi +@@ -19637,31 +20323,106 @@ + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C compiler version" >&5 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +-if test "${ac_cv_c_compiler_gnu+set}" = set; then ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } ++if test "${ac_cv_c_compiler_gnu+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++#ifndef __GNUC__ ++ choke me ++#endif ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_compiler_gnu=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_compiler_gnu=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_c_compiler_gnu=$ac_compiler_gnu ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } ++GCC=`test $ac_compiler_gnu = yes && echo yes` ++ac_test_CFLAGS=${CFLAGS+set} ++ac_save_CFLAGS=$CFLAGS ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -19671,59 +20432,35 @@ + int + main () + { +-#ifndef __GNUC__ +- choke me +-#endif + + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_compiler_gnu=yes ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-ac_cv_c_compiler_gnu=$ac_compiler_gnu +- +-fi +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +-GCC=`test $ac_compiler_gnu = yes && echo yes` +-ac_test_CFLAGS=${CFLAGS+set} +-ac_save_CFLAGS=$CFLAGS +-CFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_g+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -19739,38 +20476,80 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cc_g=no ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -19786,12 +20565,12 @@ + CFLAGS= + fi + fi +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_prog_cc_stdc=no ++ ac_cv_prog_cc_c89=no + ac_save_CC=$CC + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -19825,12 +20604,17 @@ + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated +- as 'x'. The following induces an error, until -std1 is added to get ++ as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something +- that's true only with -std1. */ ++ that's true only with -std. */ + int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ + int test (int i, double x); + struct s1 {int (*f) (int a);}; + struct s2 {int (*f) (double a);}; +@@ -19845,206 +20629,58 @@ + return 0; + } + _ACEOF +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX 10.20 and later -Ae +-# HP-UX older versions -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_prog_cc_stdc=$ac_arg +-break ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_c89=$ac_arg + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break + done +-rm -f conftest.$ac_ext conftest.$ac_objext ++rm -f conftest.$ac_ext + CC=$ac_save_CC + + fi +- +-case "x$ac_cv_prog_cc_stdc" in +- x|xno) +- echo "$as_me:$LINENO: result: none needed" >&5 +-echo "${ECHO_T}none needed" >&6 ;; ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; ++ xno) ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; + *) +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 +- CC="$CC $ac_cv_prog_cc_stdc" ;; ++ CC="$CC $ac_cv_prog_cc_c89" ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + esac + +-# Some people use a C++ compiler to compile C. Since we use `exit', +-# in C++ we need to declare it. In case someone uses the same compiler +-# for both compiling C and C++ we need to have the C++ compiler decide +-# the declaration of exit, since it's the most demanding environment. +-cat >conftest.$ac_ext <<_ACEOF +-#ifndef __cplusplus +- choke me +-#endif +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-#include +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-continue +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h +-fi +- +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -20052,8 +20688,8 @@ + + depcc="$CC" am_compiler_list= + +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -20117,13 +20753,19 @@ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings +- # (even with -Werror). So we grep stderr for any message +- # that says an option was ignored. +- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi +@@ -20137,13 +20779,11 @@ + fi + + fi +-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + +- +- +-if ++ if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= +@@ -20155,15 +20795,15 @@ + + + if test "x$CC" != xcc; then +- echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 +-echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 ++echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6; } + else +- echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 +-echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 ++echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6; } + fi + set dummy $CC; ac_cc=`echo $2 | + sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +-if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\" = set"; then ++if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -20184,14 +20824,23 @@ + # Make sure it works both with $CC and with simple cc. + # We do the test twice because some compilers refuse to overwrite an + # existing .o file with -o, though they will create one. +-ac_try='$CC -c conftest.$ac_ext -o conftest.$ac_objext >&5' +-if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++rm -f conftest2.* ++if { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ test -f conftest2.$ac_objext && { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; +@@ -20200,19 +20849,32 @@ + if test "x$CC" != xcc; then + # Test first that cc exists at all. + if { ac_try='cc -c conftest.$ac_ext >&5' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +- ac_try='cc -c conftest.$ac_ext -o conftest.$ac_objext >&5' +- if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++ rm -f conftest2.* ++ if { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ test -f conftest2.$ac_objext && { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; +@@ -20228,15 +20890,15 @@ + else + eval ac_cv_prog_cc_${ac_cc}_c_o=no + fi +-rm -f conftest* ++rm -f core conftest* + + fi +-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + + cat >>confdefs.h <<\_ACEOF + #define NO_MINUS_C_MINUS_O 1 +@@ -20257,6 +20919,7 @@ + CC="$am_aux_dir/compile $CC" + fi + ++ + # Find a good install program. We prefer a C program (faster), + # so one script is as good as another. But avoid the broken or + # incompatible versions: +@@ -20270,8 +20933,8 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -20293,7 +20956,7 @@ + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -20312,21 +20975,22 @@ + ;; + esac + done ++IFS=$as_save_IFS + + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -20346,8 +21010,8 @@ + + # Checks for header files. + +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } + if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -20371,35 +21035,31 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_header_stdc=no ++ ac_cv_header_stdc=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +@@ -20455,6 +21115,7 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include ++#include + #if ((' ' & 0x0FF) == 0x020) + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +@@ -20474,18 +21135,27 @@ + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) +- exit(2); +- exit (0); ++ return 2; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -20498,12 +21168,14 @@ + ( exit $ac_status ) + ac_cv_header_stdc=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -20518,9 +21190,9 @@ + for ac_func in vprintf + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -20546,75 +21218,67 @@ + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + +-echo "$as_me:$LINENO: checking for _doprnt" >&5 +-echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for _doprnt" >&5 ++echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6; } + if test "${ac_cv_func__doprnt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -20641,68 +21305,59 @@ + + #undef _doprnt + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char _doprnt (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub__doprnt) || defined (__stub____doprnt) ++#if defined __stub__doprnt || defined __stub____doprnt + choke me +-#else +-char (*f) () = _doprnt; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != _doprnt; ++return _doprnt (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func__doprnt=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func__doprnt=no ++ ac_cv_func__doprnt=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5 +-echo "${ECHO_T}$ac_cv_func__doprnt" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5 ++echo "${ECHO_T}$ac_cv_func__doprnt" >&6; } + if test $ac_cv_func__doprnt = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -20716,8 +21371,8 @@ + + + +-echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +-echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 ++echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; } + if test "${ac_cv_c_const+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -20735,10 +21390,10 @@ + #ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; +- const charset x; ++ const charset cs; + /* SunOS 4.1.1 cc rejects this. */ +- char const *const *ccp; +- char **p; ++ char const *const *pcpcc; ++ char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; +@@ -20747,16 +21402,17 @@ + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; +- ccp = &g + (g ? g-g : 0); ++ pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ +- ++ccp; +- p = (char**) ccp; +- ccp = (char const *const *) p; ++ ++pcpcc; ++ ppc = (char**) pcpcc; ++ pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; ++ if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; +@@ -20775,7 +21431,9 @@ + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; ++ if (!foo) return 0; + } ++ return !cs[0] && !zero.x; + #endif + + ; +@@ -20783,38 +21441,34 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_c_const=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_c_const=no ++ ac_cv_c_const=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +-echo "${ECHO_T}$ac_cv_c_const" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 ++echo "${ECHO_T}$ac_cv_c_const" >&6; } + if test $ac_cv_c_const = no; then + + cat >>confdefs.h <<\_ACEOF +@@ -20824,8 +21478,8 @@ + fi + + +-echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 +-echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 ++echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6; } + if test "${ac_cv_c_bigendian+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -20842,7 +21496,8 @@ + int + main () + { +-#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN ++#if ! (defined BYTE_ORDER && defined BIG_ENDIAN && defined LITTLE_ENDIAN \ ++ && BYTE_ORDER && BIG_ENDIAN && LITTLE_ENDIAN) + bogus endian macros + #endif + +@@ -20851,27 +21506,22 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + # It does; now see whether it defined to BIG_ENDIAN or not. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -20894,40 +21544,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_c_bigendian=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_c_bigendian=no ++ ac_cv_c_bigendian=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-# It does not; compile a test program. ++ # It does not; compile a test program. + if test "$cross_compiling" = yes; then + # try to guess the endianness by grepping values into an object file + ac_cv_c_bigendian=unknown +@@ -20937,11 +21583,11 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; +-short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; ++short int ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; ++short int ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; + void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } +-short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; +-short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; ++short int ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; ++short int ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; + void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } + int + main () +@@ -20952,27 +21598,22 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then + ac_cv_c_bigendian=yes + fi +@@ -20988,8 +21629,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -20997,27 +21640,41 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ ++$ac_includes_default + int + main () + { ++ + /* Are we little or big endian? From Harbison&Steele. */ + union + { +- long l; +- char c[sizeof (long)]; ++ long int l; ++ char c[sizeof (long int)]; + } u; + u.l = 1; +- exit (u.c[sizeof (long) - 1] == 1); ++ return u.c[sizeof (long int) - 1] == 1; ++ ++ ; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -21030,13 +21687,16 @@ + ( exit $ac_status ) + ac_cv_c_bigendian=yes + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +-echo "${ECHO_T}$ac_cv_c_bigendian" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 ++echo "${ECHO_T}$ac_cv_c_bigendian" >&6; } + case $ac_cv_c_bigendian in + yes) + +@@ -21066,18 +21726,19 @@ + for ac_header in limits.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -21088,41 +21749,37 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -21131,24 +21788,22 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -21156,9 +21811,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in +@@ -21182,25 +21838,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## --------------------------------- ## +-## Report this to the libusb lists. ## +-## --------------------------------- ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -21219,18 +21869,19 @@ + for ac_header in unistd.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -21241,41 +21892,37 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -21284,24 +21931,22 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -21309,9 +21954,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in +@@ -21335,25 +21981,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## --------------------------------- ## +-## Report this to the libusb lists. ## +-## --------------------------------- ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -21372,18 +22012,19 @@ + for ac_header in values.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -21394,41 +22035,37 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -21437,24 +22074,22 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -21462,9 +22097,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in +@@ -21488,25 +22124,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## --------------------------------- ## +-## Report this to the libusb lists. ## +-## --------------------------------- ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -21527,9 +22157,9 @@ + for ac_func in memmove + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -21555,68 +22185,60 @@ + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -21627,8 +22249,8 @@ + + + if test "$os_support" = "bsd"; then +- echo "$as_me:$LINENO: checking if dev/usb/usb.h uses new naming convention" >&5 +-echo $ECHO_N "checking if dev/usb/usb.h uses new naming convention... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if dev/usb/usb.h uses new naming convention" >&5 ++echo $ECHO_N "checking if dev/usb/usb.h uses new naming convention... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -21647,41 +22269,37 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + cat >>confdefs.h <<_ACEOF + #define HAVE_OLD_DEV_USB_USB_H 1 + _ACEOF + + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + + #pkg-config: pkg-config is a tool to simplify checks for libraries and versions. +@@ -21689,20 +22307,20 @@ + try_pkgconfig=true + have_pkgconfig=false + +-# Check whether --with-pkgconfig or --without-pkgconfig was given. ++# Check whether --with-pkgconfig was given. + if test "${with_pkgconfig+set}" = set; then +- withval="$with_pkgconfig" +- ++ withval=$with_pkgconfig; + if test x$withval = xno; then + try_pkgconfig=false + pkgconfig_msg="no (not requested)" + fi +-fi; ++fi ++ + if $try_pkgconfig; then + # Extract the first word of "pkg-config", so it can be a program name with args. + set dummy pkg-config; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_PKG_CONFIG+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -21717,27 +22335,28 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + ;; + esac + fi + PKG_CONFIG=$ac_cv_path_PKG_CONFIG +- + if test -n "$PKG_CONFIG"; then +- echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 +-echo "${ECHO_T}$PKG_CONFIG" >&6 ++ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ++echo "${ECHO_T}$PKG_CONFIG" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + if test -n "${PKG_CONFIG}"; then + have_pkgconfig=true + pkgconfig_msg="yes" +@@ -21748,23 +22367,23 @@ + + + # Check if the user wants to enable documentation +-echo "$as_me:$LINENO: checking if we should build the documentation" >&5 +-echo $ECHO_N "checking if we should build the documentation... $ECHO_C" >&6 +-# Check whether --enable-build-docs or --disable-build-docs was given. ++{ echo "$as_me:$LINENO: checking if we should build the documentation" >&5 ++echo $ECHO_N "checking if we should build the documentation... $ECHO_C" >&6; } ++# Check whether --enable-build-docs was given. + if test "${enable_build_docs+set}" = set; then +- enableval="$enable_build_docs" +- test "$enableval" != no && build_docs=yes || build_docs=no ++ enableval=$enable_build_docs; test "$enableval" != no && build_docs=yes || build_docs=no + else + build_docs=auto +-fi; +-echo "$as_me:$LINENO: result: $build_docs" >&5 +-echo "${ECHO_T}$build_docs" >&6 ++fi ++ ++{ echo "$as_me:$LINENO: result: $build_docs" >&5 ++echo "${ECHO_T}$build_docs" >&6; } + + if test "$build_docs" != "no"; then + # Extract the first word of "jade", so it can be a program name with args. + set dummy jade; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_JADE+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -21777,30 +22396,32 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_JADE="jade" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + JADE=$ac_cv_prog_JADE + if test -n "$JADE"; then +- echo "$as_me:$LINENO: result: $JADE" >&5 +-echo "${ECHO_T}$JADE" >&6 ++ { echo "$as_me:$LINENO: result: $JADE" >&5 ++echo "${ECHO_T}$JADE" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + if test -z "$JADE"; then + # Extract the first word of "openjade", so it can be a program name with args. + set dummy openjade; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_JADE+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -21813,41 +22434,43 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_JADE="openjade" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + JADE=$ac_cv_prog_JADE + if test -n "$JADE"; then +- echo "$as_me:$LINENO: result: $JADE" >&5 +-echo "${ECHO_T}$JADE" >&6 ++ { echo "$as_me:$LINENO: result: $JADE" >&5 ++echo "${ECHO_T}$JADE" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + fi + + +-echo "$as_me:$LINENO: checking for Doxygen tools" >&5 +-echo $ECHO_N "checking for Doxygen tools... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for Doxygen tools" >&5 ++echo $ECHO_N "checking for Doxygen tools... $ECHO_C" >&6; } + + +- echo "$as_me:$LINENO: checking for dot" >&5 +-echo $ECHO_N "checking for dot... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dot" >&5 ++echo $ECHO_N "checking for dot... $ECHO_C" >&6; } + if test -n "$DOT"; then + libusb_cv_path="$DOT"; + else + libusb_cache=`echo dot | sed 'y%./+-%__p_%'` + +- if eval "test \"\${libusb_cv_path_$libusb_cache+set}\" = set"; then ++ if { as_var=libusb_cv_path_$libusb_cache; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + +@@ -21887,12 +22510,12 @@ + fi + + if test -z "$libusb_cv_path" || test "$libusb_cv_path" = NONE; then +- echo "$as_me:$LINENO: result: not found" >&5 +-echo "${ECHO_T}not found" >&6 ++ { echo "$as_me:$LINENO: result: not found" >&5 ++echo "${ECHO_T}not found" >&6; } + + else +- echo "$as_me:$LINENO: result: $libusb_cv_path" >&5 +-echo "${ECHO_T}$libusb_cv_path" >&6 ++ { echo "$as_me:$LINENO: result: $libusb_cv_path" >&5 ++echo "${ECHO_T}$libusb_cv_path" >&6; } + DOT=$libusb_cv_path + + fi +@@ -21905,14 +22528,14 @@ + + + +- echo "$as_me:$LINENO: checking for doxygen" >&5 +-echo $ECHO_N "checking for doxygen... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for doxygen" >&5 ++echo $ECHO_N "checking for doxygen... $ECHO_C" >&6; } + if test -n "$DOXYGEN"; then + libusb_cv_path="$DOXYGEN"; + else + libusb_cache=`echo doxygen | sed 'y%./+-%__p_%'` + +- if eval "test \"\${libusb_cv_path_$libusb_cache+set}\" = set"; then ++ if { as_var=libusb_cv_path_$libusb_cache; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + +@@ -21952,12 +22575,12 @@ + fi + + if test -z "$libusb_cv_path" || test "$libusb_cv_path" = NONE; then +- echo "$as_me:$LINENO: result: not found" >&5 +-echo "${ECHO_T}not found" >&6 ++ { echo "$as_me:$LINENO: result: not found" >&5 ++echo "${ECHO_T}not found" >&6; } + + else +- echo "$as_me:$LINENO: result: $libusb_cv_path" >&5 +-echo "${ECHO_T}$libusb_cv_path" >&6 ++ { echo "$as_me:$LINENO: result: $libusb_cv_path" >&5 ++echo "${ECHO_T}$libusb_cv_path" >&6; } + DOXYGEN=$libusb_cv_path + + fi +@@ -21984,9 +22607,7 @@ + build_docs="no" + fi + +- +- +-if test "$build_docs" != "no"; then ++ if test "$build_docs" != "no"; then + BUILD_DOCS_TRUE= + BUILD_DOCS_FALSE='#' + else +@@ -21995,9 +22616,9 @@ + fi + + +- ac_config_files="$ac_config_files Makefile doc/Makefile libusb.spec libusb-config libusb.pc tests/Makefile README INSTALL.libusb usb.h Doxyfile" ++ac_config_files="$ac_config_files Makefile doc/Makefile libusb.spec libusb-config libusb.pc tests/Makefile README INSTALL.libusb usb.h Doxyfile" + +- ac_config_commands="$ac_config_commands default" ++ac_config_commands="$ac_config_commands default" + + cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure +@@ -22017,39 +22638,58 @@ + + # The following way of writing the cache mishandles newlines in values, + # but we know of no workaround that is simple, portable, and efficient. +-# So, don't put newlines in cache variables' values. ++# So, we kill variables containing newlines. + # Ultrix sh set writes to stderr and can't be redirected directly, + # and sets the high bit in the cache file unless we assign to the vars. +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ + (set) 2>&1 | +- case `(ac_space=' '; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +- ;; ++ ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} | ++ esac | ++ sort ++) | + sed ' ++ /^ac_cv_env_/b end + t clear +- : clear ++ :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end +- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ +- : end' >>confcache +-if diff $cache_file confcache >/dev/null 2>&1; then :; else +- if test -w $cache_file; then +- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else +- echo "not updating unwritable cache $cache_file" ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi + rm -f confcache +@@ -22058,38 +22698,31 @@ + # Let make expand exec_prefix. + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +-# trailing colons and then remove the whole line if VPATH becomes empty +-# (actually we leave an empty line to preserve line numbers). +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/; +-s/:*\${srcdir}:*/:/; +-s/:*@srcdir@:*/:/; +-s/^\([^=]*=[ ]*\):*/\1/; +-s/:*$//; +-s/^[^=]*=[ ]*$//; +-}' +-fi +- + DEFS=-DHAVE_CONFIG_H + + ac_libobjs= + ac_ltlibobjs= + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. +- ac_i=`echo "$ac_i" | +- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` +- # 2. Add them. +- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + done + LIBOBJS=$ac_libobjs + + LTLIBOBJS=$ac_ltlibobjs + + ++if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi + if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. + Usually this means the macro was only invoked conditionally." >&5 +@@ -22170,17 +22803,45 @@ + ## M4sh Initialization. ## + ## --------------------- ## + +-# Be Bourne compatible ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi +-DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +@@ -22190,8 +22851,43 @@ + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -22205,18 +22901,19 @@ + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -22224,159 +22921,120 @@ + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + +- +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits +- +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh +-fi ++# CDPATH. ++$as_unset CDPATH + + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in +- /*) +- if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || +- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -22385,7 +23043,28 @@ + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -22393,32 +23072,15 @@ + # Sed expression to map a string onto a valid variable name. + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +- +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- +-exec 6>&1 +- +-# Open the log real soon, to keep \$[0] and so on meaningful, and to +-# report actual input values of CONFIG_FILES etc. instead of their +-# values after options handling. Logging --version etc. is OK. +-exec 5>>config.log +-{ +- echo +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +-## Running $as_me. ## +-_ASBOX +-} >&5 +-cat >&5 <<_CSEOF +- ++ ++exec 6>&1 ++ ++# Save the log message, to keep $[0] and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" + This file was extended by libusb $as_me 0.1.12, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -22426,30 +23088,20 @@ + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +-_CSEOF +-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +-echo >&5 ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ + _ACEOF + ++cat >>$CONFIG_STATUS <<_ACEOF + # Files that config.status was made for. +-if test -n "$ac_config_files"; then +- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_headers"; then +- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_links"; then +- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +-fi ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" + +-if test -n "$ac_config_commands"; then +- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +-fi ++_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +- + ac_cs_usage="\ + \`$as_me' instantiates files from templates according to the + current configuration. +@@ -22457,7 +23109,7 @@ + Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit +- -V, --version print version number, then exit ++ -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions +@@ -22476,19 +23128,22 @@ + $config_commands + + Report bugs to ." +-_ACEOF + ++_ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + ac_cs_version="\\ + libusb config.status 0.1.12 +-configured by $0, generated by GNU Autoconf 2.59, +- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 2006 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." +-srcdir=$srcdir +-INSTALL="$INSTALL" ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++MKDIR_P='$MKDIR_P' + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +@@ -22499,39 +23154,24 @@ + do + case $1 in + --*=*) +- ac_option=`expr "x$1" : 'x\([^=]*\)='` +- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; +- -*) ++ *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; +- *) # This is not an option, so the user has probably given explicit +- # arguments. +- ac_option=$1 +- ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; +- --version | --vers* | -V ) +- echo "$ac_cs_version"; exit 0 ;; +- --he | --h) +- # Conflict between --help and --header +- { { echo "$as_me:$LINENO: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2;} +- { (exit 1); exit 1; }; };; +- --help | --hel | -h ) +- echo "$ac_cs_usage"; exit 0 ;; +- --debug | --d* | -d ) ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift +@@ -22541,18 +23181,24 @@ + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. +- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2;} ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + +- *) ac_config_targets="$ac_config_targets $1" ;; ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; + + esac + shift +@@ -22568,48 +23214,60 @@ + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + if \$ac_cs_recheck; then +- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 +- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + fi + + _ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ echo "$ac_log" ++} >&5 + ++_ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + # +-# INIT-COMMANDS section. ++# INIT-COMMANDS + # +- + AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + + _ACEOF + +- +- + cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# Handling of arguments. + for ac_config_target in $ac_config_targets + do +- case "$ac_config_target" in +- # Handling of arguments. +- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; +- "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; +- "libusb.spec" ) CONFIG_FILES="$CONFIG_FILES libusb.spec" ;; +- "libusb-config" ) CONFIG_FILES="$CONFIG_FILES libusb-config" ;; +- "libusb.pc" ) CONFIG_FILES="$CONFIG_FILES libusb.pc" ;; +- "tests/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; +- "README" ) CONFIG_FILES="$CONFIG_FILES README" ;; +- "INSTALL.libusb" ) CONFIG_FILES="$CONFIG_FILES INSTALL.libusb" ;; +- "usb.h" ) CONFIG_FILES="$CONFIG_FILES usb.h" ;; +- "Doxyfile" ) CONFIG_FILES="$CONFIG_FILES Doxyfile" ;; +- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; +- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; +- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; ++ "libusb.spec") CONFIG_FILES="$CONFIG_FILES libusb.spec" ;; ++ "libusb-config") CONFIG_FILES="$CONFIG_FILES libusb-config" ;; ++ "libusb.pc") CONFIG_FILES="$CONFIG_FILES libusb.pc" ;; ++ "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; ++ "README") CONFIG_FILES="$CONFIG_FILES README" ;; ++ "INSTALL.libusb") CONFIG_FILES="$CONFIG_FILES INSTALL.libusb" ;; ++ "usb.h") CONFIG_FILES="$CONFIG_FILES usb.h" ;; ++ "Doxyfile") CONFIG_FILES="$CONFIG_FILES Doxyfile" ;; ++ "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; ++ + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 + echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac + done + ++ + # If the user did not use the arguments to specify the items to instantiate, + # then the envvar interface is used. Set only those that are not. + # We use the long form for the default assignment because of an extremely +@@ -22621,380 +23279,500 @@ + fi + + # Have a temporary directory for convenience. Make it in the build tree +-# simply because there is no reason to put it here, and in addition, ++# simply because there is no reason against having it here, and in addition, + # creating and moving files from /tmp can sometimes cause problems. +-# Create a temporary directory, and hook for its removal unless debugging. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. + $debug || + { +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 + } +- + # Create a (secure) tmp directory for tmp files. + + { +- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" + } || + { +- tmp=./confstat$$-$RANDOM +- (umask 077 && mkdir $tmp) ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") + } || + { + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } + } + +-_ACEOF +- +-cat >>$CONFIG_STATUS <<_ACEOF +- + # +-# CONFIG_FILES section. ++# Set up the sed scripts for CONFIG_FILES section. + # + + # No need to generate the scripts if there are no CONFIG_FILES. + # This happens for instance when ./config.status config.h +-if test -n "\$CONFIG_FILES"; then +- # Protect against being on the right side of a sed subst in config.status. +- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; +- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +-s,@SHELL@,$SHELL,;t t +-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +-s,@exec_prefix@,$exec_prefix,;t t +-s,@prefix@,$prefix,;t t +-s,@program_transform_name@,$program_transform_name,;t t +-s,@bindir@,$bindir,;t t +-s,@sbindir@,$sbindir,;t t +-s,@libexecdir@,$libexecdir,;t t +-s,@datadir@,$datadir,;t t +-s,@sysconfdir@,$sysconfdir,;t t +-s,@sharedstatedir@,$sharedstatedir,;t t +-s,@localstatedir@,$localstatedir,;t t +-s,@libdir@,$libdir,;t t +-s,@includedir@,$includedir,;t t +-s,@oldincludedir@,$oldincludedir,;t t +-s,@infodir@,$infodir,;t t +-s,@mandir@,$mandir,;t t +-s,@build_alias@,$build_alias,;t t +-s,@host_alias@,$host_alias,;t t +-s,@target_alias@,$target_alias,;t t +-s,@DEFS@,$DEFS,;t t +-s,@ECHO_C@,$ECHO_C,;t t +-s,@ECHO_N@,$ECHO_N,;t t +-s,@ECHO_T@,$ECHO_T,;t t +-s,@LIBS@,$LIBS,;t t +-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +-s,@INSTALL_DATA@,$INSTALL_DATA,;t t +-s,@CYGPATH_W@,$CYGPATH_W,;t t +-s,@PACKAGE@,$PACKAGE,;t t +-s,@VERSION@,$VERSION,;t t +-s,@ACLOCAL@,$ACLOCAL,;t t +-s,@AUTOCONF@,$AUTOCONF,;t t +-s,@AUTOMAKE@,$AUTOMAKE,;t t +-s,@AUTOHEADER@,$AUTOHEADER,;t t +-s,@MAKEINFO@,$MAKEINFO,;t t +-s,@AMTAR@,$AMTAR,;t t +-s,@install_sh@,$install_sh,;t t +-s,@STRIP@,$STRIP,;t t +-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t +-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t +-s,@mkdir_p@,$mkdir_p,;t t +-s,@AWK@,$AWK,;t t +-s,@SET_MAKE@,$SET_MAKE,;t t +-s,@am__leading_dot@,$am__leading_dot,;t t +-s,@LIBUSB_MAJOR_VERSION@,$LIBUSB_MAJOR_VERSION,;t t +-s,@LIBUSB_MINOR_VERSION@,$LIBUSB_MINOR_VERSION,;t t +-s,@LIBUSB_MICRO_VERSION@,$LIBUSB_MICRO_VERSION,;t t +-s,@LIBUSB_VERSION@,$LIBUSB_VERSION,;t t +-s,@LIBUSB_INTERFACE_AGE@,$LIBUSB_INTERFACE_AGE,;t t +-s,@LIBUSB_BINARY_AGE@,$LIBUSB_BINARY_AGE,;t t +-s,@LT_RELEASE@,$LT_RELEASE,;t t +-s,@LT_CURRENT@,$LT_CURRENT,;t t +-s,@LT_REVISION@,$LT_REVISION,;t t +-s,@LT_AGE@,$LT_AGE,;t t +-s,@build@,$build,;t t +-s,@build_cpu@,$build_cpu,;t t +-s,@build_vendor@,$build_vendor,;t t +-s,@build_os@,$build_os,;t t +-s,@host@,$host,;t t +-s,@host_cpu@,$host_cpu,;t t +-s,@host_vendor@,$host_vendor,;t t +-s,@host_os@,$host_os,;t t +-s,@CC@,$CC,;t t +-s,@CFLAGS@,$CFLAGS,;t t +-s,@LDFLAGS@,$LDFLAGS,;t t +-s,@CPPFLAGS@,$CPPFLAGS,;t t +-s,@ac_ct_CC@,$ac_ct_CC,;t t +-s,@EXEEXT@,$EXEEXT,;t t +-s,@OBJEXT@,$OBJEXT,;t t +-s,@DEPDIR@,$DEPDIR,;t t +-s,@am__include@,$am__include,;t t +-s,@am__quote@,$am__quote,;t t +-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t +-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t +-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t +-s,@CCDEPMODE@,$CCDEPMODE,;t t +-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t +-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t +-s,@EGREP@,$EGREP,;t t +-s,@LN_S@,$LN_S,;t t +-s,@ECHO@,$ECHO,;t t +-s,@AR@,$AR,;t t +-s,@ac_ct_AR@,$ac_ct_AR,;t t +-s,@RANLIB@,$RANLIB,;t t +-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +-s,@CPP@,$CPP,;t t +-s,@CXX@,$CXX,;t t +-s,@CXXFLAGS@,$CXXFLAGS,;t t +-s,@ac_ct_CXX@,$ac_ct_CXX,;t t +-s,@CXXDEPMODE@,$CXXDEPMODE,;t t +-s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t +-s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t +-s,@CXXCPP@,$CXXCPP,;t t +-s,@F77@,$F77,;t t +-s,@FFLAGS@,$FFLAGS,;t t +-s,@ac_ct_F77@,$ac_ct_F77,;t t +-s,@LIBTOOL@,$LIBTOOL,;t t +-s,@DARWIN_API@,$DARWIN_API,;t t +-s,@LINUX_API@,$LINUX_API,;t t +-s,@BSD_API@,$BSD_API,;t t +-s,@LINUX_API_TRUE@,$LINUX_API_TRUE,;t t +-s,@LINUX_API_FALSE@,$LINUX_API_FALSE,;t t +-s,@BSD_API_TRUE@,$BSD_API_TRUE,;t t +-s,@BSD_API_FALSE@,$BSD_API_FALSE,;t t +-s,@DARWIN_API_TRUE@,$DARWIN_API_TRUE,;t t +-s,@DARWIN_API_FALSE@,$DARWIN_API_FALSE,;t t +-s,@OSLIBS@,$OSLIBS,;t t +-s,@BIGENDIAN@,$BIGENDIAN,;t t +-s,@PKG_CONFIG@,$PKG_CONFIG,;t t +-s,@pkgconfigdir@,$pkgconfigdir,;t t +-s,@JADE@,$JADE,;t t +-s,@LIBUSB_HAVE_DOT@,$LIBUSB_HAVE_DOT,;t t +-s,@DOXYGEN@,$DOXYGEN,;t t +-s,@DOXYGEN_PROJECT_NAME@,$DOXYGEN_PROJECT_NAME,;t t +-s,@DOXYGEN_PROJECT_NUMBER@,$DOXYGEN_PROJECT_NUMBER,;t t +-s,@LIBUSB_HAS_DOXYGEN@,$LIBUSB_HAS_DOXYGEN,;t t +-s,@BUILD_DOCS_TRUE@,$BUILD_DOCS_TRUE,;t t +-s,@BUILD_DOCS_FALSE@,$BUILD_DOCS_FALSE,;t t +-s,@LIBOBJS@,$LIBOBJS,;t t +-s,@LTLIBOBJS@,$LTLIBOBJS,;t t +-CEOF +- +-_ACEOF +- +- cat >>$CONFIG_STATUS <<\_ACEOF +- # Split the substitutions into bite-sized pieces for seds with +- # small command number limits, like on Digital OSF/1 and HP-UX. +- ac_max_sed_lines=48 +- ac_sed_frag=1 # Number of current file. +- ac_beg=1 # First line for current file. +- ac_end=$ac_max_sed_lines # Line after last line for current file. +- ac_more_lines=: +- ac_sed_cmds= +- while $ac_more_lines; do +- if test $ac_beg -gt 1; then +- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- else +- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- fi +- if test ! -s $tmp/subs.frag; then +- ac_more_lines=false +- else +- # The purpose of the label and of the branching condition is to +- # speed up the sed processing (if there are no `@' at all, there +- # is no need to browse any of the substitutions). +- # These are the two extra sed commands mentioned above. +- (echo ':t +- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" +- else +- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" +- fi +- ac_sed_frag=`expr $ac_sed_frag + 1` +- ac_beg=$ac_end +- ac_end=`expr $ac_end + $ac_max_sed_lines` +- fi +- done +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds=cat ++if test -n "$CONFIG_FILES"; then ++ ++_ACEOF ++ ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++am__isrc!$am__isrc$ac_delim ++CYGPATH_W!$CYGPATH_W$ac_delim ++PACKAGE!$PACKAGE$ac_delim ++VERSION!$VERSION$ac_delim ++ACLOCAL!$ACLOCAL$ac_delim ++AUTOCONF!$AUTOCONF$ac_delim ++AUTOMAKE!$AUTOMAKE$ac_delim ++AUTOHEADER!$AUTOHEADER$ac_delim ++MAKEINFO!$MAKEINFO$ac_delim ++install_sh!$install_sh$ac_delim ++STRIP!$STRIP$ac_delim ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim ++mkdir_p!$mkdir_p$ac_delim ++AWK!$AWK$ac_delim ++SET_MAKE!$SET_MAKE$ac_delim ++am__leading_dot!$am__leading_dot$ac_delim ++AMTAR!$AMTAR$ac_delim ++am__tar!$am__tar$ac_delim ++am__untar!$am__untar$ac_delim ++MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim ++MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim ++MAINT!$MAINT$ac_delim ++LIBUSB_MAJOR_VERSION!$LIBUSB_MAJOR_VERSION$ac_delim ++LIBUSB_MINOR_VERSION!$LIBUSB_MINOR_VERSION$ac_delim ++LIBUSB_MICRO_VERSION!$LIBUSB_MICRO_VERSION$ac_delim ++LIBUSB_VERSION!$LIBUSB_VERSION$ac_delim ++LIBUSB_INTERFACE_AGE!$LIBUSB_INTERFACE_AGE$ac_delim ++LIBUSB_BINARY_AGE!$LIBUSB_BINARY_AGE$ac_delim ++LT_RELEASE!$LT_RELEASE$ac_delim ++LT_CURRENT!$LT_CURRENT$ac_delim ++LT_REVISION!$LT_REVISION$ac_delim ++LT_AGE!$LT_AGE$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++DEPDIR!$DEPDIR$ac_delim ++am__include!$am__include$ac_delim ++am__quote!$am__quote$ac_delim ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim ++CCDEPMODE!$CCDEPMODE$ac_delim ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim ++SED!$SED$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +-fi # test -n "$CONFIG_FILES" ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++LN_S!$LN_S$ac_delim ++ECHO!$ECHO$ac_delim ++AR!$AR$ac_delim ++RANLIB!$RANLIB$ac_delim ++DSYMUTIL!$DSYMUTIL$ac_delim ++NMEDIT!$NMEDIT$ac_delim ++CPP!$CPP$ac_delim ++CXX!$CXX$ac_delim ++CXXFLAGS!$CXXFLAGS$ac_delim ++ac_ct_CXX!$ac_ct_CXX$ac_delim ++CXXDEPMODE!$CXXDEPMODE$ac_delim ++am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim ++am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim ++CXXCPP!$CXXCPP$ac_delim ++F77!$F77$ac_delim ++FFLAGS!$FFLAGS$ac_delim ++ac_ct_F77!$ac_ct_F77$ac_delim ++LIBTOOL!$LIBTOOL$ac_delim ++DARWIN_API!$DARWIN_API$ac_delim ++LINUX_API!$LINUX_API$ac_delim ++BSD_API!$BSD_API$ac_delim ++LINUX_API_TRUE!$LINUX_API_TRUE$ac_delim ++LINUX_API_FALSE!$LINUX_API_FALSE$ac_delim ++BSD_API_TRUE!$BSD_API_TRUE$ac_delim ++BSD_API_FALSE!$BSD_API_FALSE$ac_delim ++DARWIN_API_TRUE!$DARWIN_API_TRUE$ac_delim ++DARWIN_API_FALSE!$DARWIN_API_FALSE$ac_delim ++OSLIBS!$OSLIBS$ac_delim ++BIGENDIAN!$BIGENDIAN$ac_delim ++PKG_CONFIG!$PKG_CONFIG$ac_delim ++pkgconfigdir!$pkgconfigdir$ac_delim ++JADE!$JADE$ac_delim ++LIBUSB_HAVE_DOT!$LIBUSB_HAVE_DOT$ac_delim ++DOXYGEN!$DOXYGEN$ac_delim ++DOXYGEN_PROJECT_NAME!$DOXYGEN_PROJECT_NAME$ac_delim ++DOXYGEN_PROJECT_NUMBER!$DOXYGEN_PROJECT_NUMBER$ac_delim ++LIBUSB_HAS_DOXYGEN!$LIBUSB_HAS_DOXYGEN$ac_delim ++BUILD_DOCS_TRUE!$BUILD_DOCS_TRUE$ac_delim ++BUILD_DOCS_FALSE!$BUILD_DOCS_FALSE$ac_delim ++LIBOBJS!$LIBOBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 43; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done + ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof + _ACEOF ++ ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ + cat >>$CONFIG_STATUS <<\_ACEOF +-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++fi # test -n "$CONFIG_FILES" ++ ++ ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; + esac + +- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. +- ac_dir=`(dirname "$ac_file") 2>/dev/null || ++ ac_dir=`$as_dirname -- "$ac_file" || + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || + echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || + echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac + ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; +- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac ++ ac_MKDIR_P=$MKDIR_P ++ case $MKDIR_P in ++ [\\/$]* | ?:[\\/]* ) ;; ++ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; ++ esac ++_ACEOF + +- if test x"$ac_file" != x-; then +- { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- rm -f "$ac_file" +- fi +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- configure_input= +- else +- configure_input="$ac_file. " +- fi +- configure_input=$configure_input"Generated from `echo $ac_file_in | +- sed 's,.*/,,'` by configure." +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac + _ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? + cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub + $extrasub +@@ -23002,387 +23780,175 @@ + cat >>$CONFIG_STATUS <<\_ACEOF + :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s,@configure_input@,$configure_input,;t t +-s,@srcdir@,$ac_srcdir,;t t +-s,@abs_srcdir@,$ac_abs_srcdir,;t t +-s,@top_srcdir@,$ac_top_srcdir,;t t +-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +-s,@builddir@,$ac_builddir,;t t +-s,@abs_builddir@,$ac_abs_builddir,;t t +-s,@top_builddir@,$ac_top_builddir,;t t +-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +-s,@INSTALL@,$ac_INSTALL,;t t +-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out +- rm -f $tmp/stdin +- if test x"$ac_file" != x-; then +- mv $tmp/out $ac_file +- else +- cat $tmp/out +- rm -f $tmp/out +- fi +- +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- +-# +-# CONFIG_HEADER section. +-# ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++s&@MKDIR_P@&$ac_MKDIR_P&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} + +-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +-# NAME is the cpp macro being defined and VALUE is the value it is being given. +-# +-# ac_d sets the value in "#define NAME VALUE" lines. +-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +-ac_dB='[ ].*$,\1#\2' +-ac_dC=' ' +-ac_dD=',;t' +-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +-ac_uB='$,\1#\2define\3' +-ac_uC=' ' +-ac_uD=',;t' +- +-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ++ rm -f "$tmp/stdin" + case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac +- +- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- # Do quote $f, to prevent DOS paths from being IFS'd. +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +- # Remove the trailing spaces. +- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in +- ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # + _ACEOF + +-# Transform confdefs.h into two sed scripts, `conftest.defines' and +-# `conftest.undefs', that substitutes the proper values into +-# config.h.in to produce config.h. The first handles `#define' +-# templates, and the second `#undef' templates. +-# And first: Protect against being on the right side of a sed subst in +-# config.status. Protect against being in an unquoted here document +-# in config.status. +-rm -f conftest.defines conftest.undefs +-# Using a here document instead of a string reduces the quoting nightmare. +-# Putting comments in sed scripts is not portable. +-# +-# `end' is used to avoid that the second main sed command (meant for +-# 0-ary CPP macros) applies to n-ary macro definitions. +-# See the Autoconf documentation for `clear'. +-cat >confdef2sed.sed <<\_ACEOF +-s/[\\&,]/\\&/g +-s,[\\$`],\\&,g +-t clear +-: clear +-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +-t end +-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +-: end +-_ACEOF +-# If some macros were called several times there might be several times +-# the same #defines, which is useless. Nevertheless, we may not want to +-# sort them, since we want the *last* AC-DEFINE to be honored. +-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +-rm -f confdef2sed.sed ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' + +-# This sed command replaces #undef with comments. This is necessary, for ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines ++ ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for + # example, in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. +-cat >>conftest.undefs <<\_ACEOF +-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +-_ACEOF ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' + +-# Break up conftest.defines because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +-echo ' :' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.defines >/dev/null ++while : + do +- # Write a limited-size here document to $tmp/defines.sed. +- echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#define' lines. +- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def ++_ACEOF ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF +- sed -f $tmp/defines.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break + rm -f conftest.defines + mv conftest.tail conftest.defines + done +-rm -f conftest.defines +-echo ' fi # grep' >>$CONFIG_STATUS +-echo >>$CONFIG_STATUS +- +-# Break up conftest.undefs because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.undefs >/dev/null +-do +- # Write a limited-size here document to $tmp/undefs.sed. +- echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#undef' +- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS +- echo 'CEOF +- sed -f $tmp/undefs.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail +- rm -f conftest.undefs +- mv conftest.tail conftest.undefs +-done +-rm -f conftest.undefs ++rm -f conftest.defines conftest.tail + ++echo "ac_result=$ac_in" >>$CONFIG_STATUS + cat >>$CONFIG_STATUS <<\_ACEOF +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- echo "/* Generated by configure. */" >$tmp/config.h +- else +- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h +- fi +- cat $tmp/in >>$tmp/config.h +- rm -f $tmp/in + if test x"$ac_file" != x-; then +- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 + echo "$as_me: $ac_file is unchanged" >&6;} + else +- ac_dir=`(dirname "$ac_file") 2>/dev/null || +-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X\(//\)[^/]' \| \ +- X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- + rm -f $ac_file +- mv $tmp/config.h $ac_file ++ mv "$tmp/config.h" $ac_file + fi + else +- cat $tmp/config.h +- rm -f $tmp/config.h ++ echo "/* $configure_input */" ++ cat "$ac_result" + fi ++ rm -f "$tmp/out12" + # Compute $ac_file's index in $config_headers. ++_am_arg=$ac_file + _am_stamp_count=1 + for _am_header in $config_headers :; do + case $_am_header in +- $ac_file | $ac_file:* ) ++ $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac + done +-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || +-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X$ac_file : 'X\(//\)[^/]' \| \ +- X$ac_file : 'X\(//\)$' \| \ +- X$ac_file : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X$ac_file | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'`/stamp-h$_am_stamp_count +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- +-# +-# CONFIG_COMMANDS section. +-# +-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue +- ac_dest=`echo "$ac_file" | sed 's,:.*,,'` +- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_dir=`(dirname "$ac_dest") 2>/dev/null || +-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_dest" : 'X\(//\)[^/]' \| \ +- X"$ac_dest" : 'X\(//\)$' \| \ +- X"$ac_dest" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_dest" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- +- ac_builddir=. +- +-if test "$ac_dir" != .; then +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi +- +-case $srcdir in +- .) # No --srcdir option. We are building in place. +- ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. +- ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac ++echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || ++$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$_am_arg" : 'X\(//\)[^/]' \| \ ++ X"$_am_arg" : 'X\(//\)$' \| \ ++ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$_am_arg" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac + + +- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 +-echo "$as_me: executing $ac_dest commands" >&6;} +- case $ac_dest in +- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. +@@ -23390,95 +23956,127 @@ + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. +- # So let's grep whole file. +- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then +- dirpart=`(dirname "$mf") 2>/dev/null || ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || + $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ +- X"$mf" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || + echo X"$mf" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + else + continue + fi +- grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue +- # Extract the definition of DEP_FILES from the Makefile without +- # running `make'. ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` +- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" +- # We invoke sed twice because it is the simplest approach to +- # changing $(DEPDIR) to its actual value in the expansion. +- for file in `sed -n ' +- /^DEP_FILES = .*\\\\$/ { +- s/^DEP_FILES = // +- :loop +- s/\\\\$// +- p +- n +- /\\\\$/ b loop +- p +- } +- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue +- fdir=`(dirname "$file") 2>/dev/null || ++ fdir=`$as_dirname -- "$file" || + $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ +- X"$file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || + echo X"$file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p $dirpart/$fdir +- else +- as_dir=$dirpart/$fdir ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir=$dirpart/$fdir ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || + echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 +-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done + ;; +- default ) chmod +x libusb-config ;; ++ "default":C) chmod +x libusb-config ;; ++ + esac +-done +-_ACEOF ++done # for ac_tag + +-cat >>$CONFIG_STATUS <<\_ACEOF + + { (exit 0); exit 0; } + _ACEOF +--- a/doc/Makefile.in ++++ b/doc/Makefile.in +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.8.3 from Makefile.am. ++# Makefile.in generated by automake 1.10.1 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,15 +13,11 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +-top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +-INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -33,6 +29,7 @@ + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : ++build_triplet = @build@ + host_triplet = @host@ + subdir = doc + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +@@ -41,15 +38,13 @@ + $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +-mkinstalldirs = $(mkdir_p) ++mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = + SOURCES = + DIST_SOURCES = + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ +-AMDEP_FALSE = @AMDEP_FALSE@ +-AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -58,10 +53,6 @@ + AWK = @AWK@ + BIGENDIAN = @BIGENDIAN@ + BSD_API = @BSD_API@ +-BSD_API_FALSE = @BSD_API_FALSE@ +-BSD_API_TRUE = @BSD_API_TRUE@ +-BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ +-BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ +@@ -73,13 +64,12 @@ + CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DARWIN_API = @DARWIN_API@ +-DARWIN_API_FALSE = @DARWIN_API_FALSE@ +-DARWIN_API_TRUE = @DARWIN_API_TRUE@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOXYGEN = @DOXYGEN@ + DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@ + DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@ ++DSYMUTIL = @DSYMUTIL@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ +@@ -88,6 +78,8 @@ + EXEEXT = @EXEEXT@ + F77 = @F77@ + FFLAGS = @FFLAGS@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -106,15 +98,16 @@ + LIBUSB_MINOR_VERSION = @LIBUSB_MINOR_VERSION@ + LIBUSB_VERSION = @LIBUSB_VERSION@ + LINUX_API = @LINUX_API@ +-LINUX_API_FALSE = @LINUX_API_FALSE@ +-LINUX_API_TRUE = @LINUX_API_TRUE@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_AGE = @LT_AGE@ + LT_CURRENT = @LT_CURRENT@ + LT_RELEASE = @LT_RELEASE@ + LT_REVISION = @LT_REVISION@ ++MAINT = @MAINT@ + MAKEINFO = @MAKEINFO@ ++MKDIR_P = @MKDIR_P@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OSLIBS = @OSLIBS@ + PACKAGE = @PACKAGE@ +@@ -126,52 +119,63 @@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ + RANLIB = @RANLIB@ ++SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ +-ac_ct_AR = @ac_ct_AR@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ +-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ ++builddir = @builddir@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + pkgconfigdir = @pkgconfigdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ + sgml_files = manual.sgml intro.sgml api.sgml functions.sgml examples.sgml + + # For when we have a man page :) +@@ -192,7 +196,7 @@ + all: all-am + + .SUFFIXES: +-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +@@ -217,9 +221,9 @@ + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +-$(top_srcdir)/configure: $(am__configure_deps) ++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + mostlyclean-libtool: +@@ -227,10 +231,6 @@ + + clean-libtool: + -rm -rf .libs _libs +- +-distclean-libtool: +- -rm -f libtool +-uninstall-info-am: + tags: TAGS + TAGS: + +@@ -239,22 +239,21 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ +- list='$(DISTFILES)'; for file in $$list; do \ +- case $$file in \ +- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ +- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ +- esac; \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ +- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ +- dir="/$$dir"; \ +- $(mkdir_p) "$(distdir)$$dir"; \ +- else \ +- dir=''; \ +- fi; \ + if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -289,7 +288,7 @@ + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + + distclean-generic: +- -rm -f $(CONFIG_CLEAN_FILES) ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -300,7 +299,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic distclean-libtool ++distclean-am: clean-am distclean-generic + + dvi: dvi-am + +@@ -314,12 +313,20 @@ + + install-data-am: + ++install-dvi: install-dvi-am ++ + install-exec-am: + ++install-html: install-html-am ++ + install-info: install-info-am + + install-man: + ++install-pdf: install-pdf-am ++ ++install-ps: install-ps-am ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -338,17 +345,20 @@ + + ps-am: + +-uninstall-am: uninstall-info-am ++uninstall-am: ++ ++.MAKE: install-am install-strip + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ +- install-data install-data-am install-exec install-exec-am \ +- install-info install-info-am install-man install-strip \ ++ install-data install-data-am install-dvi install-dvi-am \ ++ install-exec install-exec-am install-html install-html-am \ ++ install-info install-info-am install-man install-pdf \ ++ install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ +- mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ +- uninstall-info-am ++ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am + + + all: $(MANUALS) +--- a/ltmain.sh ++++ b/ltmain.sh +@@ -1,8 +1,8 @@ + # ltmain.sh - Provide generalized library-building support services. + # NOTE: Changing this file will not affect anything until you rerun configure. + # +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004 +-# Free Software Foundation, Inc. ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, ++# 2007, 2008 Free Software Foundation, Inc. + # Originally by Gordon Matzigkeit , 1996 + # + # This program is free software; you can redistribute it and/or modify +@@ -17,7 +17,7 @@ + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a +@@ -33,9 +33,6 @@ + # function. + progpath="$0" + +-# RH: define SED for historic ltconfig's generated by Libtool 1.3 +-[ -z "$SED" ] && SED=sed +- + # The name of this program: + progname=`echo "$progpath" | $SED $basename` + modename="$progname" +@@ -46,9 +43,22 @@ + + PROGRAM=ltmain.sh + PACKAGE=libtool +-VERSION=1.5.6 +-TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42)" ++VERSION="1.5.26 Debian 1.5.26-4" ++TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)" + ++# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh + + # Check that we have a working $echo. + if test "X$1" = X--no-reexec; then +@@ -86,14 +96,15 @@ + Xsed="${SED}"' -e 1s/^X//' + sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' + # test EBCDIC or ASCII +-case `echo A|tr A '\301'` in +- A) # EBCDIC based system +- SP2NL="tr '\100' '\n'" +- NL2SP="tr '\r\n' '\100\100'" ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ SP2NL='tr \040 \012' ++ NL2SP='tr \015\012 \040\040' + ;; +- *) # Assume ASCII based system +- SP2NL="tr '\040' '\012'" +- NL2SP="tr '\015\012' '\040\040'" ++ *) # EBCDIC based system ++ SP2NL='tr \100 \n' ++ NL2SP='tr \r\n \100\100' + ;; + esac + +@@ -102,16 +113,25 @@ + # These must not be set unconditionally because not all systems understand + # e.g. LANG=C (notably SCO). + # We save the old values to restore during execute mode. +-if test "${LC_ALL+set}" = set; then +- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL +-fi +-if test "${LANG+set}" = set; then +- save_LANG="$LANG"; LANG=C; export LANG ++lt_env= ++for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES ++do ++ eval "if test \"\${$lt_var+set}\" = set; then ++ save_$lt_var=\$$lt_var ++ lt_env=\"$lt_var=\$$lt_var \$lt_env\" ++ $lt_var=C ++ export $lt_var ++ fi" ++done ++ ++if test -n "$lt_env"; then ++ lt_env="env $lt_env" + fi + + # Make sure IFS has a sensible default +-: ${IFS=" +-"} ++lt_nl=' ++' ++IFS=" $lt_nl" + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + $echo "$modename: not configured to build any kind of library" 1>&2 +@@ -128,20 +148,62 @@ + show="$echo" + show_help= + execute_dlfiles= ++duplicate_deps=no ++preserve_args= + lo2o="s/\\.lo\$/.${objext}/" + o2lo="s/\\.${objext}\$/.lo/" ++extracted_archives= ++extracted_serial=0 + + ##################################### + # Shell function definitions: + # This seems to be the best place for them + ++# func_mktempdir [string] ++# Make a temporary directory that won't clash with other running ++# libtool processes, and avoids race conditions if possible. If ++# given, STRING is the basename for that directory. ++func_mktempdir () ++{ ++ my_template="${TMPDIR-/tmp}/${1-$progname}" ++ ++ if test "$run" = ":"; then ++ # Return a directory name, but don't create it in dry-run mode ++ my_tmpdir="${my_template}-$$" ++ else ++ ++ # If mktemp works, use that first and foremost ++ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` ++ ++ if test ! -d "$my_tmpdir"; then ++ # Failing that, at least try and use $RANDOM to avoid a race ++ my_tmpdir="${my_template}-${RANDOM-0}$$" ++ ++ save_mktempdir_umask=`umask` ++ umask 0077 ++ $mkdir "$my_tmpdir" ++ umask $save_mktempdir_umask ++ fi ++ ++ # If we're not in dry-run mode, bomb out on failure ++ test -d "$my_tmpdir" || { ++ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 ++ exit $EXIT_FAILURE ++ } ++ fi ++ ++ $echo "X$my_tmpdir" | $Xsed ++} ++ ++ + # func_win32_libid arg + # return the library type of file 'arg' + # + # Need a lot of goo to handle *both* DLLs and import libs + # Has to be a shell function in order to 'eat' the argument + # that is supplied when $file_magic_command is called. +-func_win32_libid () { ++func_win32_libid () ++{ + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in +@@ -152,12 +214,17 @@ + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ +- sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` +- if test "X$win32_nmres" = "Ximport" ; then +- win32_libid_type="x86 archive import" +- else +- win32_libid_type="x86 archive static" +- fi ++ $SED -n -e '1,100{ ++ / I /{ ++ s,.*,import, ++ p ++ q ++ } ++ }'` ++ case $win32_nmres in ++ import*) win32_libid_type="x86 archive import";; ++ *) win32_libid_type="x86 archive static";; ++ esac + fi + ;; + *DLL*) +@@ -181,7 +248,8 @@ + # Only attempt this if the compiler in the base compile + # command doesn't match the default compiler. + # arg is usually of the form 'gcc ...' +-func_infer_tag () { ++func_infer_tag () ++{ + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do +@@ -238,12 +306,126 @@ + esac + fi + } ++ ++ ++# func_extract_an_archive dir oldlib ++func_extract_an_archive () ++{ ++ f_ex_an_ar_dir="$1"; shift ++ f_ex_an_ar_oldlib="$1" ++ ++ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" ++ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? ++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++} ++ ++# func_extract_archives gentop oldlib ... ++func_extract_archives () ++{ ++ my_gentop="$1"; shift ++ my_oldlibs=${1+"$@"} ++ my_oldobjs="" ++ my_xlib="" ++ my_xabs="" ++ my_xdir="" ++ my_status="" ++ ++ $show "${rm}r $my_gentop" ++ $run ${rm}r "$my_gentop" ++ $show "$mkdir $my_gentop" ++ $run $mkdir "$my_gentop" ++ my_status=$? ++ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then ++ exit $my_status ++ fi ++ ++ for my_xlib in $my_oldlibs; do ++ # Extract the objects. ++ case $my_xlib in ++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; ++ *) my_xabs=`pwd`"/$my_xlib" ;; ++ esac ++ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` ++ my_xlib_u=$my_xlib ++ while :; do ++ case " $extracted_archives " in ++ *" $my_xlib_u "*) ++ extracted_serial=`expr $extracted_serial + 1` ++ my_xlib_u=lt$extracted_serial-$my_xlib ;; ++ *) break ;; ++ esac ++ done ++ extracted_archives="$extracted_archives $my_xlib_u" ++ my_xdir="$my_gentop/$my_xlib_u" ++ ++ $show "${rm}r $my_xdir" ++ $run ${rm}r "$my_xdir" ++ $show "$mkdir $my_xdir" ++ $run $mkdir "$my_xdir" ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then ++ exit $exit_status ++ fi ++ case $host in ++ *-darwin*) ++ $show "Extracting $my_xabs" ++ # Do not bother doing anything if just a dry run ++ if test -z "$run"; then ++ darwin_orig_dir=`pwd` ++ cd $my_xdir || exit $? ++ darwin_archive=$my_xabs ++ darwin_curdir=`pwd` ++ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` ++ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` ++ if test -n "$darwin_arches"; then ++ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` ++ darwin_arch= ++ $show "$darwin_base_archive has multiple architectures $darwin_arches" ++ for darwin_arch in $darwin_arches ; do ++ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" ++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ func_extract_an_archive "`pwd`" "${darwin_base_archive}" ++ cd "$darwin_curdir" ++ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" ++ done # $darwin_arches ++ ## Okay now we have a bunch of thin objects, gotta fatten them up :) ++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` ++ darwin_file= ++ darwin_files= ++ for darwin_file in $darwin_filelist; do ++ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` ++ lipo -create -output "$darwin_file" $darwin_files ++ done # $darwin_filelist ++ ${rm}r unfat-$$ ++ cd "$darwin_orig_dir" ++ else ++ cd "$darwin_orig_dir" ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ fi # $darwin_arches ++ fi # $run ++ ;; ++ *) ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ ;; ++ esac ++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` ++ done ++ func_extract_archives_result="$my_oldobjs" ++} + # End of Shell function definitions + ##################################### + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + ++disable_libs=no ++ + # Parse our command line options once, thoroughly. + while test "$#" -gt 0 + do +@@ -306,12 +488,13 @@ + ;; + + --version) +- $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" +- $echo +- $echo "Copyright (C) 2003 Free Software Foundation, Inc." +- $echo "This is free software; see the source for copying conditions. There is NO" +- $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." +- exit $EXIT_SUCCESS ++ echo "\ ++$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP ++ ++Copyright (C) 2008 Free Software Foundation, Inc. ++This is free software; see the source for copying conditions. There is NO ++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." ++ exit $? + ;; + + --config) +@@ -320,7 +503,7 @@ + for tagname in $taglist; do + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + done +- exit $EXIT_SUCCESS ++ exit $? + ;; + + --debug) +@@ -345,7 +528,7 @@ + else + $echo "disable static libraries" + fi +- exit $EXIT_SUCCESS ++ exit $? + ;; + + --finish) mode="finish" ;; +@@ -360,7 +543,11 @@ + preserve_args="$preserve_args $arg" + ;; + +- --tag) prevopt="--tag" prev=tag ;; ++ --tag) ++ prevopt="--tag" ++ prev=tag ++ preserve_args="$preserve_args --tag" ++ ;; + --tag=*) + set tag "$optarg" ${1+"$@"} + shift +@@ -392,6 +579,18 @@ + exit $EXIT_FAILURE + fi + ++case $disable_libs in ++no) ++ ;; ++shared) ++ build_libtool_libs=no ++ build_old_libs=yes ++ ;; ++static) ++ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` ++ ;; ++esac ++ + # If this variable is set in any of the actions, the command in it + # will be execed at the end. This prevents here-documents from being + # left over by shells. +@@ -402,7 +601,7 @@ + # Infer the operation mode. + if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 +- $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2 ++ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 + case $nonopt in + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link +@@ -468,7 +667,7 @@ + + for arg + do +- case "$arg_mode" in ++ case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" +@@ -550,7 +749,10 @@ + case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. ++ # in scan sets, and some SunOS ksh mistreat backslash-escaping ++ # in scan sets (worked around with variable expansion), ++ # and furthermore cannot handle '|' '&' '(' ')' in scan sets ++ # at all, so we specify them separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; +@@ -588,9 +790,11 @@ + *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; +- *.f90) xform=f90 ;; ++ *.[fF][09]?) xform=[fF][09]. ;; + *.for) xform=for ;; + *.java) xform=java ;; ++ *.obj) xform=obj ;; ++ *.sx) xform=sx ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` +@@ -624,6 +828,14 @@ + esac + done + ++ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` ++ case $qlibobj in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ qlibobj="\"$qlibobj\"" ;; ++ esac ++ test "X$libobj" != "X$qlibobj" \ ++ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ ++ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then +@@ -696,12 +908,17 @@ + $run $rm $removelist + exit $EXIT_FAILURE + fi +- $echo $srcfile > "$lockfile" ++ $echo "$srcfile" > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi ++ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` ++ case $qsrcfile in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ qsrcfile="\"$qsrcfile\"" ;; ++ esac + + $run $rm "$libobj" "${libobj}T" + +@@ -723,18 +940,18 @@ + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then +- command="$base_compile $srcfile $pic_flag" ++ command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code +- command="$base_compile $srcfile" ++ command="$base_compile $qsrcfile" + fi + + if test ! -d "${xdir}$objdir"; then + $show "$mkdir ${xdir}$objdir" + $run $mkdir ${xdir}$objdir +- status=$? +- if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then +- exit $status ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then ++ exit $exit_status + fi + fi + +@@ -746,7 +963,7 @@ + $run $rm "$lobj" "$output_obj" + + $show "$command" +- if $run eval "$command"; then : ++ if $run eval $lt_env "$command"; then : + else + test -n "$output_obj" && $run $rm $removelist + exit $EXIT_FAILURE +@@ -806,9 +1023,9 @@ + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code +- command="$base_compile $srcfile" ++ command="$base_compile $qsrcfile" + else +- command="$base_compile $srcfile $pic_flag" ++ command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + command="$command -o $obj" +@@ -818,7 +1035,7 @@ + command="$command$suppress_output" + $run $rm "$obj" "$output_obj" + $show "$command" +- if $run eval "$command"; then : ++ if $run eval $lt_env "$command"; then : + else + $run $rm $removelist + exit $EXIT_FAILURE +@@ -937,6 +1154,7 @@ + no_install=no + objs= + non_pic_objects= ++ notinst_path= # paths that contain not-installed libtool libraries + precious_files_regex= + prefer_static_libs=no + preload=no +@@ -950,6 +1168,7 @@ + thread_safe=no + vinfo= + vinfo_number=no ++ single_module="${wl}-single_module" + + func_infer_tag $base_compile + +@@ -957,22 +1176,32 @@ + for arg + do + case $arg in +- -all-static | -static) +- if test "X$arg" = "X-all-static"; then ++ -all-static | -static | -static-libtool-libs) ++ case $arg in ++ -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi +- else ++ prefer_static_libs=yes ++ ;; ++ -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi +- fi ++ prefer_static_libs=built ++ ;; ++ -static-libtool-libs) ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ fi ++ prefer_static_libs=yes ++ ;; ++ esac + build_libtool_libs=no + build_old_libs=yes +- prefer_static_libs=yes + break + ;; + esac +@@ -1147,6 +1376,11 @@ + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" + fi + else + # Only an error if not doing a dry-run. +@@ -1230,6 +1464,13 @@ + prev= + continue + ;; ++ darwin_framework|darwin_framework_skip) ++ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ prev= ++ continue ++ ;; + *) + eval "$prev=\"\$arg\"" + prev= +@@ -1288,6 +1529,18 @@ + continue + ;; + ++ -framework|-arch|-isysroot) ++ case " $CC " in ++ *" ${arg} ${1} "* | *" ${arg} ${1} "*) ++ prev=darwin_framework_skip ;; ++ *) compiler_flags="$compiler_flags $arg" ++ prev=darwin_framework ;; ++ esac ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ continue ++ ;; ++ + -inst-prefix-dir) + prev=inst_prefix + continue +@@ -1314,7 +1567,8 @@ + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 +- exit $EXIT_FAILURE ++ absdir="$dir" ++ notinst_path="$notinst_path $dir" + fi + dir="$absdir" + ;; +@@ -1328,10 +1582,15 @@ + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac + ;; + esac + continue +@@ -1340,15 +1599,15 @@ + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in +- *-*-cygwin* | *-*-pw32* | *-*-beos*) ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; +- *-*-mingw* | *-*-os2*) ++ *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; +- *-*-openbsd* | *-*-freebsd*) ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; +@@ -1356,10 +1615,19 @@ + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs -framework System" + continue ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ test "X$arg" = "X-lc" && continue ++ ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in +- *-*-openbsd* | *-*-freebsd*) ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; +@@ -1369,8 +1637,25 @@ + continue + ;; + +- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) +- deplibs="$deplibs $arg" ++ # Tru64 UNIX uses -model [arg] to determine the layout of C++ ++ # classes, name mangling, and exception handling. ++ -model) ++ compile_command="$compile_command $arg" ++ compiler_flags="$compiler_flags $arg" ++ finalize_command="$finalize_command $arg" ++ prev=xcompiler ++ continue ++ ;; ++ ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) ++ compiler_flags="$compiler_flags $arg" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ continue ++ ;; ++ ++ -multi_module) ++ single_module="${wl}-multi_module" + continue + ;; + +@@ -1379,13 +1664,20 @@ + continue + ;; + +- # gcc -m* arguments should be passed to the linker via $compiler_flags +- # in order to pass architecture information to the linker +- # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo +- # but this is not reliable with gcc because gcc may use -mfoo to +- # select a different linker, different libraries, etc, while +- # -Wl,-mfoo simply passes -mfoo to the linker. +- -m*) ++ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler ++ # -r[0-9][0-9]* specifies the processor on the SGI compiler ++ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler ++ # +DA*, +DD* enable 64-bit mode on the HP compiler ++ # -q* pass through compiler args for the IBM compiler ++ # -m* pass through architecture-specific compiler args for GCC ++ # -m*, -t[45]*, -txscale* pass through architecture-specific ++ # compiler args for GCC ++ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC ++ # -F/path gives path to uninstalled frameworks, gcc on darwin ++ # @file GCC response files ++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ ++ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) ++ + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +@@ -1396,9 +1688,7 @@ + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" +- if test "$with_gcc" = "yes" ; then +- compiler_flags="$compiler_flags $arg" +- fi ++ compiler_flags="$compiler_flags $arg" + continue + ;; + +@@ -1414,9 +1704,9 @@ + + -no-install) + case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) + # The PATH hackery in wrapper scripts is required on Windows +- # in order for the loader to find any dlls it needs. ++ # and Darwin in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no +@@ -1475,7 +1765,7 @@ + continue + ;; + +- -static) ++ -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects +@@ -1636,6 +1926,11 @@ + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" + fi + else + # Only an error if not doing a dry-run. +@@ -1741,9 +2036,9 @@ + if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir +- status=$? +- if test "$status" -ne 0 && test ! -d "$output_objdir"; then +- exit $status ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then ++ exit $exit_status + fi + fi + +@@ -1806,7 +2101,6 @@ + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries +- notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" +@@ -1841,7 +2135,10 @@ + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; +- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; ++ link) ++ libs="$deplibs %DEPLIBS%" ++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ++ ;; + esac + fi + if test "$pass" = dlopen; then +@@ -1853,12 +2150,12 @@ + lib= + found=no + case $deplib in +- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else +- deplibs="$deplib $deplibs" ++ compiler_flags="$compiler_flags $deplib" + fi + continue + ;; +@@ -1867,12 +2164,13 @@ + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + continue + fi +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` +- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ if test "$linkmode" = lib; then ++ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" ++ else ++ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" ++ fi ++ for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" +@@ -1981,7 +2279,22 @@ + fi + case $linkmode in + lib) +- if test "$deplibs_check_method" != pass_all; then ++ valid_a_lib=no ++ case $deplibs_check_method in ++ match_pattern*) ++ set dummy $deplibs_check_method ++ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` ++ if eval $echo \"$deplib\" 2>/dev/null \ ++ | $SED 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ valid_a_lib=yes ++ fi ++ ;; ++ pass_all) ++ valid_a_lib=yes ++ ;; ++ esac ++ if test "$valid_a_lib" != yes; then + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" +@@ -2031,7 +2344,7 @@ + esac # case $deplib + if test "$found" = yes || test -f "$lib"; then : + else +- $echo "$modename: cannot find the library \`$lib'" 1>&2 ++ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 + exit $EXIT_FAILURE + fi + +@@ -2055,6 +2368,8 @@ + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no ++ avoidtemprpath= ++ + + # Read the .la file + case $lib in +@@ -2153,11 +2468,19 @@ + dir="$libdir" + absdir="$libdir" + fi ++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else +- dir="$ladir/$objdir" +- absdir="$abs_ladir/$objdir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" ++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ dir="$ladir" ++ absdir="$abs_ladir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ else ++ dir="$ladir/$objdir" ++ absdir="$abs_ladir/$objdir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ fi + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + +@@ -2228,14 +2551,16 @@ + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && +- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then ++ { { test "$prefer_static_libs" = no || ++ test "$prefer_static_libs,$installed" = "built,yes"; } || ++ test -z "$old_library"; }; then + # We need to hardcode the library path +- if test -n "$shlibpath_var"; then ++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; +- *) temp_rpath="$temp_rpath $dir" ;; ++ *) temp_rpath="$temp_rpath $absdir" ;; + esac + fi + +@@ -2272,8 +2597,12 @@ + fi + + link_static=no # Whether the deplib will be linked statically ++ use_static_libs=$prefer_static_libs ++ if test "$use_static_libs" = built && test "$installed" = yes ; then ++ use_static_libs=no ++ fi + if test -n "$library_names" && +- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then ++ { test "$use_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes +@@ -2386,11 +2715,15 @@ + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in +- *-*-sco3.2v5* ) add_dir="-L$dir" ;; ++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; ++ *-*-sysv4*uw2*) add_dir="-L$dir" ;; ++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ ++ *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a module then we can not link against + # it, someone is ignoring the new warnings I added +- if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then ++ if /usr/bin/file -L $add 2> /dev/null | ++ $EGREP ": [^:]* bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo +@@ -2421,7 +2754,7 @@ + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then +- case "$libdir" in ++ case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; +@@ -2494,7 +2827,7 @@ + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then +- case "$libdir" in ++ case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; +@@ -2555,8 +2888,6 @@ + fi + fi + else +- convenience="$convenience $dir/$old_library" +- old_convenience="$old_convenience $dir/$old_library" + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi +@@ -2635,12 +2966,18 @@ + # we do not want to link against static libs, + # but need to link against shared + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` ++ eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done +- if test -f "$path/$depdepl" ; then ++ if test -f "$deplibdir/$depdepl" ; then ++ depdepl="$deplibdir/$depdepl" ++ elif test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" ++ else ++ # Can't find it, oh well... ++ depdepl= + fi + # do not add paths which are already there + case " $newlib_search_path " in +@@ -2674,12 +3011,12 @@ + *) continue ;; + esac + case " $deplibs " in +- *" $depdepl "*) ;; +- *) deplibs="$depdepl $deplibs" ;; ++ *" $path "*) ;; ++ *) deplibs="$path $deplibs" ;; + esac + case " $deplibs " in +- *" $path "*) ;; +- *) deplibs="$deplibs $path" ;; ++ *" $depdepl "*) ;; ++ *) deplibs="$depdepl $deplibs" ;; + esac + done + fi # link_all_deplibs != no +@@ -2788,9 +3125,10 @@ + + case $linkmode in + oldlib) +- if test -n "$deplibs"; then +- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 +- fi ++ case " $deplibs" in ++ *\ -l* | *\ -L*) ++ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;; ++ esac + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 +@@ -2918,7 +3256,7 @@ + # which has an extra 1 added just for fun + # + case $version_type in +- darwin|linux|osf|windows) ++ darwin|linux|osf|windows|none) + current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_revision" +@@ -2929,9 +3267,15 @@ + age="0" + ;; + irix|nonstopux) +- current=`expr $number_major + $number_minor - 1` ++ current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_minor" ++ lt_irix_increment=no ++ ;; ++ *) ++ $echo "$modename: unknown library version type \`$version_type'" 1>&2 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE + ;; + esac + ;; +@@ -2944,27 +3288,27 @@ + + # Check that each of the things are valid numbers. + case $current in +- [0-9]*) ;; ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) +- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 ++ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $revision in +- [0-9]*) ;; ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) +- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 ++ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $age in +- [0-9]*) ;; ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) +- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 ++ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; +@@ -2990,6 +3334,7 @@ + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` ++ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + +@@ -3004,8 +3349,11 @@ + ;; + + irix | nonstopux) +- major=`expr $current - $age + 1` +- ++ if test "X$lt_irix_increment" = "Xno"; then ++ major=`expr $current - $age` ++ else ++ major=`expr $current - $age + 1` ++ fi + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; +@@ -3142,11 +3490,11 @@ + fi + + # Eliminate all temporary directories. +- for path in $notinst_path; do +- lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` +- deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` +- dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` +- done ++ #for path in $notinst_path; do ++ # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` ++ # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` ++ # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` ++ #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. +@@ -3196,9 +3544,14 @@ + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; +- *-*-openbsd* | *-*-freebsd*) ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. +- test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. +@@ -3242,13 +3595,12 @@ + int main() { return 0; } + EOF + $rm conftest +- $LTCC -o conftest conftest.c $deplibs +- if test "$?" -eq 0 ; then ++ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then + ldd_output=`ldd conftest` + for i in $deplibs; do +- name="`expr $i : '-l\(.*\)'`" ++ name=`expr $i : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. +- if test "$name" != "" && test "$name" -ne "0"; then ++ if test "$name" != "" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) +@@ -3283,13 +3635,11 @@ + # Error occurred in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. + for i in $deplibs; do +- name="`expr $i : '-l\(.*\)'`" ++ name=`expr $i : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then + $rm conftest +- $LTCC -o conftest conftest.c $i +- # Did it work? +- if test "$?" -eq 0 ; then ++ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then + ldd_output=`ldd conftest` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in +@@ -3321,7 +3671,7 @@ + droppeddeps=yes + $echo + $echo "*** Warning! Library $i is needed by this library but I was not able to" +- $echo "*** make it link in! You will probably need to install it or some" ++ $echo "*** make it link in! You will probably need to install it or some" + $echo "*** library that it depends on before this library will be fully" + $echo "*** functional. Installing it before continuing would be even better." + fi +@@ -3335,7 +3685,7 @@ + set dummy $deplibs_check_method + file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do +- name="`expr $a_deplib : '-l\(.*\)'`" ++ name=`expr $a_deplib : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +@@ -3404,7 +3754,7 @@ + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do +- name="`expr $a_deplib : '-l\(.*\)'`" ++ name=`expr $a_deplib : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +@@ -3534,6 +3884,35 @@ + deplibs=$newdeplibs + fi + ++ ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ deplibs="$new_libs" ++ ++ + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= +@@ -3578,7 +3957,10 @@ + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then +- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ++ case $archive_cmds in ++ *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;; ++ *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;; ++ esac + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi +@@ -3617,6 +3999,7 @@ + fi + + lib="$output_objdir/$realname" ++ linknames= + for link + do + linknames="$linknames $link" +@@ -3645,6 +4028,9 @@ + # The command line is too long to execute in one step. + $show "using reloadable object file for export list..." + skipped_export=: ++ # Break out early, otherwise skipped_export may be ++ # set to false by a later but shorter cmd. ++ break + fi + done + IFS="$save_ifs" +@@ -3678,67 +4064,13 @@ + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "$mkdir $gentop" +- $run $mkdir "$gentop" +- status=$? +- if test "$status" -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi + generated="$generated $gentop" + +- for xlib in $convenience; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" +- +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "$mkdir $xdir" +- $run $mkdir "$xdir" +- status=$? +- if test "$status" -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- # We will extract separately just the conflicting names and we will no +- # longer touch any unique names. It is faster to leave these extract +- # automatically by $AR in one run. +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then +- : +- else +- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 +- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 +- $AR t "$xabs" | sort | uniq -cd | while read -r count name +- do +- i=1 +- while test "$i" -le "$count" +- do +- # Put our $i before any first dot (extension) +- # Never overwrite any file +- name_to="$name" +- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" +- do +- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` +- done +- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" +- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? +- i=`expr $i + 1` +- done +- done +- fi +- +- libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` +- done ++ func_extract_archives $gentop $convenience ++ libobjs="$libobjs $func_extract_archives_result" + fi + fi +- ++ + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" +@@ -3768,7 +4100,8 @@ + fi + fi + +- if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` && ++ if test "X$skipped_export" != "X:" && ++ len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else +@@ -3787,6 +4120,7 @@ + save_libobjs=$libobjs + fi + save_output=$output ++ output_la=`$echo "X$output" | $Xsed -e "$basename"` + + # Clear the reloadable object creation command queue and + # initialize k to one. +@@ -3796,13 +4130,13 @@ + delfiles= + last_robj= + k=1 +- output=$output_objdir/$save_output-${k}.$objext ++ output=$output_objdir/$output_la-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || +- { len=`expr "X$test_cmds" : ".*"` && ++ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" + else +@@ -3816,9 +4150,9 @@ + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi +- last_robj=$output_objdir/$save_output-${k}.$objext ++ last_robj=$output_objdir/$output_la-${k}.$objext + k=`expr $k + 1` +- output=$output_objdir/$save_output-${k}.$objext ++ output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + len=1 + fi +@@ -3838,13 +4172,13 @@ + eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi + +- # Set up a command to remove the reloadale object files ++ # Set up a command to remove the reloadable object files + # after they are used. + i=0 + while test "$i" -lt "$k" + do + i=`expr $i + 1` +- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" ++ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" + done + + $echo "creating a temporary reloadable object file: $output" +@@ -3892,13 +4226,30 @@ + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" +- $run eval "$cmd" || exit $? ++ $run eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' ++ fi ++ ++ exit $lt_exit ++ } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? ++ ++ if test -n "$convenience"; then ++ if test -z "$whole_archive_flag_spec"; then ++ $show "${rm}r $gentop" ++ $run ${rm}r "$gentop" ++ fi ++ fi ++ + exit $EXIT_SUCCESS + fi + +@@ -3919,9 +4270,10 @@ + ;; + + obj) +- if test -n "$deplibs"; then +- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 +- fi ++ case " $deplibs" in ++ *\ -l* | *\ -L*) ++ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;; ++ esac + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 +@@ -3968,72 +4320,20 @@ + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of +- # -Wl from whole_archive_flag_spec ++ # -Wl from whole_archive_flag_spec and hope we can get by with ++ # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then +- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" ++ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" ++ reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` + else + gentop="$output_objdir/${obj}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "$mkdir $gentop" +- $run $mkdir "$gentop" +- status=$? +- if test "$status" -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi + generated="$generated $gentop" + +- for xlib in $convenience; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" +- +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "$mkdir $xdir" +- $run $mkdir "$xdir" +- status=$? +- if test "$status" -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- # We will extract separately just the conflicting names and we will no +- # longer touch any unique names. It is faster to leave these extract +- # automatically by $AR in one run. +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then +- : +- else +- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 +- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 +- $AR t "$xabs" | sort | uniq -cd | while read -r count name +- do +- i=1 +- while test "$i" -le "$count" +- do +- # Put our $i before any first dot (extension) +- # Never overwrite any file +- name_to="$name" +- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" +- do +- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` +- done +- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" +- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? +- i=`expr $i + 1` +- done +- done +- fi +- +- reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` +- done ++ func_extract_archives $gentop $convenience ++ reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + +@@ -4134,6 +4434,35 @@ + ;; + esac + ++ ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $compile_deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $compile_deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ compile_deplibs="$new_libs" ++ ++ + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + +@@ -4178,10 +4507,15 @@ + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac + ;; + esac + done +@@ -4295,13 +4629,25 @@ + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then +- export_symbols="$output_objdir/$output.exp" ++ export_symbols="$output_objdir/$outputname.exp" + $run $rm $export_symbols +- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' ++ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' ++ case $host in ++ *cygwin* | *mingw* ) ++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac + else +- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' +- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' ++ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' ++ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' ++ case $host in ++ *cygwin* | *mingw* ) ++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac + fi + fi + +@@ -4352,7 +4698,26 @@ + #endif + + /* The mapping between symbol names and symbols. */ ++" ++ ++ case $host in ++ *cygwin* | *mingw* ) ++ $echo >> "$output_objdir/$dlsyms" "\ ++/* DATA imports from DLLs on WIN32 can't be const, because ++ runtime relocations are performed -- see ld's documentation ++ on pseudo-relocs */ ++struct { ++" ++ ;; ++ * ) ++ $echo >> "$output_objdir/$dlsyms" "\ + const struct { ++" ++ ;; ++ esac ++ ++ ++ $echo >> "$output_objdir/$dlsyms" "\ + const char *name; + lt_ptr address; + } +@@ -4399,16 +4764,29 @@ + esac + + # Now compile the dynamic symbol file. +- $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" +- $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? ++ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" ++ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. +- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` +- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ case $host in ++ *cygwin* | *mingw* ) ++ if test -f "$output_objdir/${outputname}.def" ; then ++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` ++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` ++ else ++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` ++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` ++ fi ++ ;; ++ * ) ++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` ++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` ++ ;; ++ esac + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 +@@ -4421,19 +4799,19 @@ + # really was required. + + # Nullify the symbol file. +- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` +- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` ++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` ++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` + fi + + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. +- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" +- status=$? ++ exit_status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then +@@ -4441,7 +4819,7 @@ + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + +- exit $status ++ exit $exit_status + fi + + if test -n "$shlibpath_var"; then +@@ -4514,7 +4892,7 @@ + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then +- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` ++ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` + else + # fast_install is set to needless + relink_command= +@@ -4551,7 +4929,7 @@ + fi + done + relink_command="(cd `pwd`; $relink_command)" +- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` + fi + + # Quote $echo for shipping. +@@ -4581,10 +4959,12 @@ + esac + case $host in + *cygwin* | *mingw* ) +- cwrappersource=`$echo ${objdir}/lt-${output}.c` +- cwrapper=`$echo ${output}.exe` +- $rm $cwrappersource $cwrapper +- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++ output_name=`basename $output` ++ output_path=`dirname $output` ++ cwrappersource="$output_path/$objdir/lt-$output_name.c" ++ cwrapper="$output_path/$output_name.exe" ++ $rm $cwrappersource $cwrapper ++ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + cat > $cwrappersource < + #include + #include ++#include ++#include ++#include + + #if defined(PATH_MAX) + # define LT_PATHMAX PATH_MAX +@@ -4619,15 +5002,19 @@ + #endif + + #ifndef DIR_SEPARATOR +-#define DIR_SEPARATOR '/' ++# define DIR_SEPARATOR '/' ++# define PATH_SEPARATOR ':' + #endif + + #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +-#define HAVE_DOS_BASED_FILE_SYSTEM +-#ifndef DIR_SEPARATOR_2 +-#define DIR_SEPARATOR_2 '\\' +-#endif ++# define HAVE_DOS_BASED_FILE_SYSTEM ++# ifndef DIR_SEPARATOR_2 ++# define DIR_SEPARATOR_2 '\\' ++# endif ++# ifndef PATH_SEPARATOR_2 ++# define PATH_SEPARATOR_2 ';' ++# endif + #endif + + #ifndef DIR_SEPARATOR_2 +@@ -4637,17 +5024,32 @@ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) + #endif /* DIR_SEPARATOR_2 */ + ++#ifndef PATH_SEPARATOR_2 ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) ++#else /* PATH_SEPARATOR_2 */ ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) ++#endif /* PATH_SEPARATOR_2 */ ++ + #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) + #define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ + } while (0) + ++/* -DDEBUG is fairly common in CFLAGS. */ ++#undef DEBUG ++#if defined DEBUGWRAPPER ++# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) ++#else ++# define DEBUG(format, ...) ++#endif ++ + const char *program_name = NULL; + + void * xmalloc (size_t num); + char * xstrdup (const char *string); +-char * basename (const char *name); +-char * fnqualify(const char *path); ++const char * base_name (const char *name); ++char * find_executable(const char *wrapper); ++int check_executable(const char *path); + char * strendzap(char *str, const char *pat); + void lt_fatal (const char *message, ...); + +@@ -4657,29 +5059,51 @@ + char **newargz; + int i; + +- program_name = (char *) xstrdup ((char *) basename (argv[0])); ++ program_name = (char *) xstrdup (base_name (argv[0])); ++ DEBUG("(main) argv[0] : %s\n",argv[0]); ++ DEBUG("(main) program_name : %s\n",program_name); + newargz = XMALLOC(char *, argc+2); + EOF + +- cat >> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" +- newargz[1] = fnqualify(argv[0]); ++ cat >> $cwrappersource <<"EOF" ++ newargz[1] = find_executable(argv[0]); ++ if (newargz[1] == NULL) ++ lt_fatal("Couldn't find %s", argv[0]); ++ DEBUG("(main) found exe at : %s\n",newargz[1]); + /* we know the script has the same name, without the .exe */ + /* so make sure newargz[1] doesn't end in .exe */ + strendzap(newargz[1],".exe"); + for (i = 1; i < argc; i++) + newargz[i+1] = xstrdup(argv[i]); + newargz[argc+1] = NULL; ++ ++ for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" ++ cat >> $cwrappersource <<"EOF" ++ return 127; + } + + void * +@@ -4699,48 +5123,148 @@ + ; + } + +-char * +-basename (const char *name) ++const char * ++base_name (const char *name) + { + const char *base; + + #if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ +- if (isalpha (name[0]) && name[1] == ':') ++ if (isalpha ((unsigned char)name[0]) && name[1] == ':') + name += 2; + #endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; +- return (char *) base; ++ return base; + } + ++int ++check_executable(const char * path) ++{ ++ struct stat st; ++ ++ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); ++ if ((!path) || (!*path)) ++ return 0; ++ ++ if ((stat (path, &st) >= 0) && ++ ( ++ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ ++#if defined (S_IXOTH) ++ ((st.st_mode & S_IXOTH) == S_IXOTH) || ++#endif ++#if defined (S_IXGRP) ++ ((st.st_mode & S_IXGRP) == S_IXGRP) || ++#endif ++ ((st.st_mode & S_IXUSR) == S_IXUSR)) ++ ) ++ return 1; ++ else ++ return 0; ++} ++ ++/* Searches for the full path of the wrapper. Returns ++ newly allocated full path name if found, NULL otherwise */ + char * +-fnqualify(const char *path) ++find_executable (const char* wrapper) + { +- size_t size; +- char *p; ++ int has_slash = 0; ++ const char* p; ++ const char* p_next; ++ /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; ++ int tmp_len; ++ char* concat_name; + +- assert(path != NULL); ++ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); + +- /* Is it qualified already? */ ++ if ((wrapper == NULL) || (*wrapper == '\0')) ++ return NULL; ++ ++ /* Absolute path? */ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++ else ++ { ++#endif ++ if (IS_DIR_SEPARATOR (wrapper[0])) ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } + #if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- if (isalpha (path[0]) && path[1] == ':') +- return xstrdup (path); ++ } + #endif +- if (IS_DIR_SEPARATOR (path[0])) +- return xstrdup (path); + +- /* prepend the current directory */ +- /* doesn't handle '~' */ ++ for (p = wrapper; *p; p++) ++ if (*p == '/') ++ { ++ has_slash = 1; ++ break; ++ } ++ if (!has_slash) ++ { ++ /* no slashes; search PATH */ ++ const char* path = getenv ("PATH"); ++ if (path != NULL) ++ { ++ for (p = path; *p; p = p_next) ++ { ++ const char* q; ++ size_t p_len; ++ for (q = p; *q; q++) ++ if (IS_PATH_SEPARATOR(*q)) ++ break; ++ p_len = q - p; ++ p_next = (*q == '\0' ? q : q + 1); ++ if (p_len == 0) ++ { ++ /* empty path: current directory */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen(tmp); ++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ } ++ else ++ { ++ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, p, p_len); ++ concat_name[p_len] = '/'; ++ strcpy (concat_name + p_len + 1, wrapper); ++ } ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++ } ++ /* not found in PATH; assume curdir */ ++ } ++ /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); +- size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ +- p = XMALLOC(char, size); +- sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); +- return p; ++ tmp_len = strlen(tmp); ++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ return NULL; + } + + char * +@@ -4784,16 +5308,16 @@ + va_end (ap); + } + EOF +- # we should really use a build-platform specific compiler +- # here, but OTOH, the wrappers (shell script and this C one) +- # are only useful if you want to execute the "real" binary. +- # Since the "real" binary is built for $host, then this +- # wrapper might as well be built for $host, too. +- $run $LTCC -s -o $cwrapper $cwrappersource +- ;; +- esac +- $rm $output +- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 ++ # we should really use a build-platform specific compiler ++ # here, but OTOH, the wrappers (shell script and this C one) ++ # are only useful if you want to execute the "real" binary. ++ # Since the "real" binary is built for $host, then this ++ # wrapper might as well be built for $host, too. ++ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource ++ ;; ++ esac ++ $rm $output ++ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + + $echo > $output "\ + #! $SHELL +@@ -4812,9 +5336,23 @@ + Xsed='${SED} -e 1s/^X//' + sed_quote_subst='$sed_quote_subst' + ++# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). ++if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST ++else ++ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh ++ + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. +-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + relink_command=\"$relink_command\" + +@@ -4943,23 +5481,23 @@ + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ +- exec \$progdir\\\\\$program \${1+\"\$@\"} ++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} + " + ;; + + *) + $echo >> $output "\ +- exec \$progdir/\$program \${1+\"\$@\"} ++ exec \"\$progdir/\$program\" \${1+\"\$@\"} + " + ;; + esac + $echo >> $output "\ +- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" ++ \$echo \"\$0: cannot exec \$program \$*\" + exit $EXIT_FAILURE + fi + else + # The program doesn't exist. +- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 ++ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + $echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit $EXIT_FAILURE +@@ -4991,71 +5529,73 @@ + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "$mkdir $gentop" +- $run $mkdir "$gentop" +- status=$? +- if test "$status" -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi + generated="$generated $gentop" + +- # Add in members from convenience archives. +- for xlib in $addlibs; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" +- +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "$mkdir $xdir" +- $run $mkdir "$xdir" +- status=$? +- if test "$status" -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- # We will extract separately just the conflicting names and we will no +- # longer touch any unique names. It is faster to leave these extract +- # automatically by $AR in one run. +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then +- : +- else +- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 +- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 +- $AR t "$xabs" | sort | uniq -cd | while read -r count name +- do +- i=1 +- while test "$i" -le "$count" +- do +- # Put our $i before any first dot (extension) +- # Never overwrite any file +- name_to="$name" +- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" +- do +- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` +- done +- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" +- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? +- i=`expr $i + 1` +- done +- done +- fi +- +- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` +- done ++ func_extract_archives $gentop $addlibs ++ oldobjs="$oldobjs $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else ++ # POSIX demands no paths to be encoded in archives. We have ++ # to avoid creating archives with duplicate basenames if we ++ # might have to extract them afterwards, e.g., when creating a ++ # static archive out of a convenience library, or when linking ++ # the entirety of a libtool archive into another (currently ++ # not supported by libtool). ++ if (for obj in $oldobjs ++ do ++ $echo "X$obj" | $Xsed -e 's%^.*/%%' ++ done | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $echo "copying selected object files to avoid basename conflicts..." ++ ++ if test -z "$gentop"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ ++ $show "${rm}r $gentop" ++ $run ${rm}r "$gentop" ++ $show "$mkdir $gentop" ++ $run $mkdir "$gentop" ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then ++ exit $exit_status ++ fi ++ fi ++ ++ save_oldobjs=$oldobjs ++ oldobjs= ++ counter=1 ++ for obj in $save_oldobjs ++ do ++ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` ++ case " $oldobjs " in ++ " ") oldobjs=$obj ;; ++ *[\ /]"$objbase "*) ++ while :; do ++ # Make sure we don't pick an alternate name that also ++ # overlaps. ++ newobj=lt$counter-$objbase ++ counter=`expr $counter + 1` ++ case " $oldobjs " in ++ *[\ /]"$newobj "*) ;; ++ *) if test ! -f "$gentop/$newobj"; then break; fi ;; ++ esac ++ done ++ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" ++ $run ln "$obj" "$gentop/$newobj" || ++ $run cp "$obj" "$gentop/$newobj" ++ oldobjs="$oldobjs $gentop/$newobj" ++ ;; ++ *) oldobjs="$oldobjs $obj" ;; ++ esac ++ done ++ fi ++ + eval cmds=\"$old_archive_cmds\" + + if len=`expr "X$cmds" : ".*"` && +@@ -5069,20 +5609,7 @@ + objlist= + concat_cmds= + save_oldobjs=$oldobjs +- # GNU ar 2.10+ was changed to match POSIX; thus no paths are +- # encoded into archives. This makes 'ar r' malfunction in +- # this piecewise linking case whenever conflicting object +- # names appear in distinct ar calls; check, warn and compensate. +- if (for obj in $save_oldobjs +- do +- $echo "X$obj" | $Xsed -e 's%^.*/%%' +- done | sort | sort -uc >/dev/null 2>&1); then +- : +- else +- $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2 +- $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2 +- AR_FLAGS=cq +- fi ++ + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do +@@ -5093,7 +5620,7 @@ + oldobjs="$objlist $obj" + objlist="$objlist $obj" + eval test_cmds=\"$old_archive_cmds\" +- if len=`expr "X$test_cmds" : ".*"` && ++ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; then + : + else +@@ -5151,7 +5678,7 @@ + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" +- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi +@@ -5290,11 +5817,11 @@ + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. +- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then ++ $echo "X$nonopt" | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac +@@ -5303,14 +5830,14 @@ + shift + else + install_prog= +- arg="$nonopt" ++ arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac +@@ -5328,28 +5855,31 @@ + do + if test -n "$dest"; then + files="$files $dest" +- dest="$arg" ++ dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; +- -f) prev="-f" ;; +- -g) prev="-g" ;; +- -m) prev="-m" ;; +- -o) prev="-o" ;; ++ -f) ++ case " $install_prog " in ++ *[\\\ /]cp\ *) ;; ++ *) prev=$arg ;; ++ esac ++ ;; ++ -g | -m | -o) prev=$arg ;; + -s) + stripme=" -s" + continue + ;; +- -*) ;; +- ++ -*) ++ ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else +- dest="$arg" ++ dest=$arg + continue + fi + ;; +@@ -5358,7 +5888,7 @@ + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac +@@ -5493,9 +6023,9 @@ + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. +- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` ++ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` + else +- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` ++ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` + fi + + $echo "$modename: warning: relinking \`$file'" 1>&2 +@@ -5527,11 +6057,14 @@ + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. ++ # Try `ln -sf' first, because the `ln' binary might depend on ++ # the symlink we replace! Solaris /bin/ln does not understand -f, ++ # so we also need to try rm && ln -s. + for linkname + do + if test "$linkname" != "$realname"; then +- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" +- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" ++ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" ++ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + fi + done + fi +@@ -5544,7 +6077,16 @@ + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" +- $run eval "$cmd" || exit $? ++ $run eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' ++ fi ++ ++ exit $lt_exit ++ } + done + IFS="$save_ifs" + fi +@@ -5638,17 +6180,15 @@ + notinst_deplibs= + relink_command= + +- # To insure that "foo" is sourced, and not "foo.exe", +- # finese the cygwin/MSYS system by explicitly sourcing "foo." +- # which disallows the automatic-append-.exe behavior. +- case $build in +- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; +- *) wrapperdot=${wrapper} ;; +- esac ++ # Note that it is not necessary on cygwin/mingw to append a dot to ++ # foo even if both foo and FILE.exe exist: automatic-append-.exe ++ # behavior happens only for exec(3), not for open(2)! Also, sourcing ++ # `FILE.' does not work on cygwin managed mounts. ++ # + # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . ${wrapperdot} ;; +- *) . ./${wrapperdot} ;; ++ case $wrapper in ++ */* | *\\*) . ${wrapper} ;; ++ *) . ./${wrapper} ;; + esac + + # Check the variables that should have been set. +@@ -5676,38 +6216,25 @@ + done + + relink_command= +- # To insure that "foo" is sourced, and not "foo.exe", +- # finese the cygwin/MSYS system by explicitly sourcing "foo." +- # which disallows the automatic-append-.exe behavior. +- case $build in +- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; +- *) wrapperdot=${wrapper} ;; +- esac ++ # Note that it is not necessary on cygwin/mingw to append a dot to ++ # foo even if both foo and FILE.exe exist: automatic-append-.exe ++ # behavior happens only for exec(3), not for open(2)! Also, sourcing ++ # `FILE.' does not work on cygwin managed mounts. ++ # + # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . ${wrapperdot} ;; +- *) . ./${wrapperdot} ;; ++ case $wrapper in ++ */* | *\\*) . ${wrapper} ;; ++ *) . ./${wrapper} ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then +- tmpdir="/tmp" +- test -n "$TMPDIR" && tmpdir="$TMPDIR" +- tmpdir="$tmpdir/libtool-$$" +- save_umask=`umask` +- umask 0077 +- if $mkdir "$tmpdir"; then +- umask $save_umask +- else +- umask $save_umask +- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 +- continue +- fi ++ tmpdir=`func_mktempdir` + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. +- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` ++ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` + + $show "$relink_command" + if $run eval "$relink_command"; then : +@@ -5727,7 +6254,7 @@ + fi + + # remove .exe since cygwin /usr/bin/install will append another +- # one anyways ++ # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in +@@ -5827,7 +6354,7 @@ + # Exit here if they wanted silent mode. + test "$show" = : && exit $EXIT_SUCCESS + +- $echo "----------------------------------------------------------------------" ++ $echo "X----------------------------------------------------------------------" | $Xsed + $echo "Libraries have been installed in:" + for libdir in $libdirs; do + $echo " $libdir" +@@ -5860,7 +6387,7 @@ + $echo + $echo "See any operating system documentation about shared libraries for" + $echo "more information, such as the ld(1) and ld.so(8) manual pages." +- $echo "----------------------------------------------------------------------" ++ $echo "X----------------------------------------------------------------------" | $Xsed + exit $EXIT_SUCCESS + ;; + +@@ -5918,8 +6445,10 @@ + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else +- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 +- exit $EXIT_FAILURE ++ if test ! -f "$dir/$dlname"; then ++ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 ++ exit $EXIT_FAILURE ++ fi + fi + ;; + +@@ -5983,12 +6512,12 @@ + fi + + # Restore saved environment variables +- if test "${save_LC_ALL+set}" = set; then +- LC_ALL="$save_LC_ALL"; export LC_ALL +- fi +- if test "${save_LANG+set}" = set; then +- LANG="$save_LANG"; export LANG +- fi ++ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES ++ do ++ eval "if test \"\${save_$lt_var+set}\" = set; then ++ $lt_var=\$save_$lt_var; export $lt_var ++ fi" ++ done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" +@@ -6077,9 +6606,17 @@ + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" +- test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + +- if test "$mode" = uninstall; then ++ case "$mode" in ++ clean) ++ case " $library_names " in ++ # " " in the beginning catches empty $dlname ++ *" $dlname "*) ;; ++ *) rmfiles="$rmfiles $objdir/$dlname" ;; ++ esac ++ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ++ ;; ++ uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + cmds=$postuninstall_cmds +@@ -6112,7 +6649,8 @@ + IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. +- fi ++ ;; ++ esac + fi + ;; + +@@ -6336,9 +6874,9 @@ + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE +- try to export only the symbols listed in SYMFILE ++ try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX +- try to export only the symbols matching REGEX ++ try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened +@@ -6352,9 +6890,11 @@ + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries +- -static do not do any dynamic linking of libtool libraries ++ -static do not do any dynamic linking of uninstalled libtool libraries ++ -static-libtool-libs ++ do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] +- specify library version info [each variable defaults to 0] ++ specify library version info [each variable defaults to 0] + + All other options (arguments beginning with \`-') are ignored. + +@@ -6397,7 +6937,7 @@ + $echo + $echo "Try \`$modename --help' for more information about other modes." + +-exit $EXIT_SUCCESS ++exit $? + + # The TAGs below are defined such that we never get into a situation + # in which we disable both kinds of libraries. Given conflicting +@@ -6411,12 +6951,11 @@ + # configuration. But we'll never go from static-only to shared-only. + + # ### BEGIN LIBTOOL TAG CONFIG: disable-shared +-build_libtool_libs=no +-build_old_libs=yes ++disable_libs=shared + # ### END LIBTOOL TAG CONFIG: disable-shared + + # ### BEGIN LIBTOOL TAG CONFIG: disable-static +-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` ++disable_libs=static + # ### END LIBTOOL TAG CONFIG: disable-static + + # Local Variables: +--- a/Makefile.in ++++ b/Makefile.in +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.8.3 from Makefile.am. ++# Makefile.in generated by automake 1.10.1 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -17,17 +17,11 @@ + + + +-SOURCES = $(libusb_la_SOURCES) $(libusbpp_la_SOURCES) +- +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +-top_builddir = . + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +-INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -39,7 +33,9 @@ + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : ++build_triplet = @build@ + host_triplet = @host@ ++subdir = . + DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \ + $(srcdir)/Doxyfile.in $(srcdir)/INSTALL.libusb.in \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ +@@ -48,19 +44,26 @@ + $(srcdir)/libusb.spec.in $(srcdir)/usb.h.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog NEWS compile \ + config.guess config.sub depcomp install-sh ltmain.sh missing +-subdir = . + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ +- configure.lineno configure.status.lineno +-mkinstalldirs = $(mkdir_p) ++ configure.lineno config.status.lineno ++mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = config.h + CONFIG_CLEAN_FILES = libusb.spec libusb-config libusb.pc README \ + INSTALL.libusb usb.h Doxyfile +-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(includedir)" ++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; ++am__vpath_adj = case $$p in \ ++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ ++ *) f=$$p;; \ ++ esac; ++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ ++ "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)" \ ++ "$(DESTDIR)$(includedir)" + libLTLIBRARIES_INSTALL = $(INSTALL) + LTLIBRARIES = $(lib_LTLIBRARIES) + libusb_la_LIBADD = +@@ -72,47 +75,54 @@ + @LINUX_API_TRUE@am__objects_1 = linux.lo + am_libusb_la_OBJECTS = usb.lo error.lo descriptors.lo $(am__objects_1) + libusb_la_OBJECTS = $(am_libusb_la_OBJECTS) ++libusb_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ ++ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(libusb_la_LDFLAGS) $(LDFLAGS) -o $@ + libusbpp_la_LIBADD = + am_libusbpp_la_OBJECTS = usbpp.lo + libusbpp_la_OBJECTS = $(am_libusbpp_la_OBJECTS) ++libusbpp_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \ ++ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ ++ $(CXXFLAGS) $(libusbpp_la_LDFLAGS) $(LDFLAGS) -o $@ + binSCRIPT_INSTALL = $(INSTALL_SCRIPT) + SCRIPTS = $(bin_SCRIPTS) + DEFAULT_INCLUDES = + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles +-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/bsd.Plo ./$(DEPDIR)/darwin.Plo \ +-@AMDEP_TRUE@ ./$(DEPDIR)/descriptors.Plo ./$(DEPDIR)/error.Plo \ +-@AMDEP_TRUE@ ./$(DEPDIR)/linux.Plo ./$(DEPDIR)/usb.Plo \ +-@AMDEP_TRUE@ ./$(DEPDIR)/usbpp.Plo + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ +- $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ ++ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +- $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ ++ $(LDFLAGS) -o $@ + CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +-LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ +- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ +- $(AM_CXXFLAGS) $(CXXFLAGS) ++LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ ++ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) + CXXLD = $(CXX) +-CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ +- $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ ++ $(LDFLAGS) -o $@ + SOURCES = $(libusb_la_SOURCES) $(libusbpp_la_SOURCES) + DIST_SOURCES = $(am__libusb_la_SOURCES_DIST) $(libusbpp_la_SOURCES) + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-exec-recursive install-info-recursive \ +- install-recursive installcheck-recursive installdirs-recursive \ +- pdf-recursive ps-recursive uninstall-info-recursive \ +- uninstall-recursive ++ install-dvi-recursive install-exec-recursive \ ++ install-html-recursive install-info-recursive \ ++ install-pdf-recursive install-ps-recursive install-recursive \ ++ installcheck-recursive installdirs-recursive pdf-recursive \ ++ ps-recursive uninstall-recursive + pkgconfigDATA_INSTALL = $(INSTALL_DATA) + DATA = $(pkgconfig_DATA) + includeHEADERS_INSTALL = $(INSTALL_HEADER) + nodist_includeHEADERS_INSTALL = $(INSTALL_HEADER) + HEADERS = $(include_HEADERS) $(nodist_include_HEADERS) ++RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ ++ distclean-recursive maintainer-clean-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) +@@ -128,8 +138,6 @@ + distuninstallcheck_listfiles = find . -type f -print + distcleancheck_listfiles = find . -type f -print + ACLOCAL = @ACLOCAL@ +-AMDEP_FALSE = @AMDEP_FALSE@ +-AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -138,10 +146,6 @@ + AWK = @AWK@ + BIGENDIAN = @BIGENDIAN@ + BSD_API = @BSD_API@ +-BSD_API_FALSE = @BSD_API_FALSE@ +-BSD_API_TRUE = @BSD_API_TRUE@ +-BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ +-BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ +@@ -153,13 +157,12 @@ + CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DARWIN_API = @DARWIN_API@ +-DARWIN_API_FALSE = @DARWIN_API_FALSE@ +-DARWIN_API_TRUE = @DARWIN_API_TRUE@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOXYGEN = @DOXYGEN@ + DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@ + DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@ ++DSYMUTIL = @DSYMUTIL@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ +@@ -168,6 +171,8 @@ + EXEEXT = @EXEEXT@ + F77 = @F77@ + FFLAGS = @FFLAGS@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -186,15 +191,16 @@ + LIBUSB_MINOR_VERSION = @LIBUSB_MINOR_VERSION@ + LIBUSB_VERSION = @LIBUSB_VERSION@ + LINUX_API = @LINUX_API@ +-LINUX_API_FALSE = @LINUX_API_FALSE@ +-LINUX_API_TRUE = @LINUX_API_TRUE@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_AGE = @LT_AGE@ + LT_CURRENT = @LT_CURRENT@ + LT_RELEASE = @LT_RELEASE@ + LT_REVISION = @LT_REVISION@ ++MAINT = @MAINT@ + MAKEINFO = @MAKEINFO@ ++MKDIR_P = @MKDIR_P@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OSLIBS = @OSLIBS@ + PACKAGE = @PACKAGE@ +@@ -206,52 +212,63 @@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ + RANLIB = @RANLIB@ ++SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ +-ac_ct_AR = @ac_ct_AR@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ +-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ ++builddir = @builddir@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + pkgconfigdir = @pkgconfigdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ + + # require automake 1.4 + # gnu strictness chokes on README being autogenerated +@@ -304,7 +321,7 @@ + .SUFFIXES: .c .cpp .lo .o .obj + am--refresh: + @: +-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +@@ -331,21 +348,21 @@ + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +-$(top_srcdir)/configure: $(am__configure_deps) ++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +-$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + + config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ +- $(MAKE) stamp-h1; \ ++ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + + stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +-$(srcdir)/config.h.in: $(am__configure_deps) ++$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ +@@ -368,38 +385,38 @@ + cd $(top_builddir) && $(SHELL) ./config.status $@ + install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) +- test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" ++ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + if test -f $$p; then \ +- f="`echo $$p | sed -e 's|^.*/||'`"; \ +- echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ +- $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ ++ f=$(am__strip_dir) \ ++ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ ++ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ + else :; fi; \ + done + + uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ +- p="`echo $$p | sed -e 's|^.*/||'`"; \ +- echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ +- $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ ++ p=$(am__strip_dir) \ ++ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ ++ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ + done + + clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ +- test "$$dir" = "$$p" && dir=.; \ ++ test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done + libusb.la: $(libusb_la_OBJECTS) $(libusb_la_DEPENDENCIES) +- $(LINK) -rpath $(libdir) $(libusb_la_LDFLAGS) $(libusb_la_OBJECTS) $(libusb_la_LIBADD) $(LIBS) ++ $(libusb_la_LINK) -rpath $(libdir) $(libusb_la_OBJECTS) $(libusb_la_LIBADD) $(LIBS) + libusbpp.la: $(libusbpp_la_OBJECTS) $(libusbpp_la_DEPENDENCIES) +- $(CXXLINK) -rpath $(libdir) $(libusbpp_la_LDFLAGS) $(libusbpp_la_OBJECTS) $(libusbpp_la_LIBADD) $(LIBS) ++ $(libusbpp_la_LINK) -rpath $(libdir) $(libusbpp_la_OBJECTS) $(libusbpp_la_LIBADD) $(LIBS) + install-binSCRIPTS: $(bin_SCRIPTS) + @$(NORMAL_INSTALL) +- test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" ++ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_SCRIPTS)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f $$d$$p; then \ +@@ -432,51 +449,51 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/usbpp.Plo@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ ++@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ ++@am__fastdepCC_TRUE@ mv -f $$depbase.Tpo $$depbase.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ $< + + .c.obj: +-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ ++@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ ++@am__fastdepCC_TRUE@ mv -f $$depbase.Tpo $$depbase.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ ++@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ ++@am__fastdepCC_TRUE@ mv -f $$depbase.Tpo $$depbase.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + + .cpp.o: +-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ ++@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ ++@am__fastdepCXX_TRUE@ mv -f $$depbase.Tpo $$depbase.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< + + .cpp.obj: +-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ ++@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ ++@am__fastdepCXX_TRUE@ mv -f $$depbase.Tpo $$depbase.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + + .cpp.lo: +-@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ ++@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ ++@am__fastdepCXX_TRUE@ mv -f $$depbase.Tpo $$depbase.Plo + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< + + mostlyclean-libtool: +@@ -487,13 +504,12 @@ + + distclean-libtool: + -rm -f libtool +-uninstall-info-am: + install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) +- test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)" ++ test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" + @list='$(pkgconfig_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f="`echo $$p | sed -e 's|^.*/||'`"; \ ++ f=$(am__strip_dir) \ + echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ + $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ + done +@@ -501,16 +517,16 @@ + uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; for p in $$list; do \ +- f="`echo $$p | sed -e 's|^.*/||'`"; \ ++ f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ + rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ + done + install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) +- test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" ++ test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" + @list='$(include_HEADERS)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f="`echo $$p | sed -e 's|^.*/||'`"; \ ++ f=$(am__strip_dir) \ + echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ + $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ + done +@@ -518,16 +534,16 @@ + uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(include_HEADERS)'; for p in $$list; do \ +- f="`echo $$p | sed -e 's|^.*/||'`"; \ ++ f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ + rm -f "$(DESTDIR)$(includedir)/$$f"; \ + done + install-nodist_includeHEADERS: $(nodist_include_HEADERS) + @$(NORMAL_INSTALL) +- test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" ++ test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" + @list='$(nodist_include_HEADERS)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- f="`echo $$p | sed -e 's|^.*/||'`"; \ ++ f=$(am__strip_dir) \ + echo " $(nodist_includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ + $(nodist_includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ + done +@@ -535,7 +551,7 @@ + uninstall-nodist_includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(nodist_include_HEADERS)'; for p in $$list; do \ +- f="`echo $$p | sed -e 's|^.*/||'`"; \ ++ f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ + rm -f "$(DESTDIR)$(includedir)/$$f"; \ + done +@@ -547,7 +563,13 @@ + # (which will cause the Makefiles to be regenerated when you run `make'); + # (2) otherwise, pass the desired values on the `make' command line. + $(RECURSIVE_TARGETS): +- @set fnord $$MAKEFLAGS; amf=$$2; \ ++ @failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ +@@ -559,15 +581,20 @@ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-mostlyclean-recursive clean-recursive distclean-recursive \ +-maintainer-clean-recursive: +- @set fnord $$MAKEFLAGS; amf=$$2; \ ++$(RECURSIVE_CLEAN_TARGETS): ++ @failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ +@@ -588,7 +615,7 @@ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +@@ -604,8 +631,8 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -613,14 +640,16 @@ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ +- if (etags --etags-include --version) >/dev/null 2>&1; then \ ++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ ++ empty_fix=.; \ + else \ + include_option=--include; \ ++ empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ +- test -f $$subdir/TAGS && \ ++ test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ +@@ -628,22 +657,23 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$tags$$unique" \ +- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ +- here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -658,24 +688,22 @@ + + distdir: $(DISTFILES) + $(am__remove_distdir) +- mkdir $(distdir) +- $(mkdir_p) $(distdir)/. $(distdir)/apidocs +- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ +- list='$(DISTFILES)'; for file in $$list; do \ +- case $$file in \ +- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ +- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ +- esac; \ ++ test -d $(distdir) || mkdir $(distdir) ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ +- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ +- dir="/$$dir"; \ +- $(mkdir_p) "$(distdir)$$dir"; \ +- else \ +- dir=''; \ +- fi; \ + if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -686,15 +714,19 @@ + || exit 1; \ + fi; \ + done +- list='$(SUBDIRS)'; for subdir in $$list; do \ ++ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || mkdir "$(distdir)/$$subdir" \ ++ || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ ++ distdir=`$(am__cd) $(distdir) && pwd`; \ ++ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="../$(top_distdir)" \ +- distdir="../$(distdir)/$$subdir" \ ++ top_distdir="$$top_distdir" \ ++ distdir="$$distdir/$$subdir" \ ++ am__remove_distdir=: \ ++ am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ +@@ -702,18 +734,22 @@ + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ +- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ ++ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) + dist-gzip: distdir +- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + + dist-bzip2: distdir +- $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 ++ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 ++ $(am__remove_distdir) ++ ++dist-lzma: distdir ++ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + + dist-tarZ: distdir +- $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z ++ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + + dist-shar: distdir +@@ -726,7 +762,7 @@ + $(am__remove_distdir) + + dist dist-all: distdir +- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + + # This target untars the dist file and tries a VPATH configuration. Then +@@ -735,13 +771,15 @@ + distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ +- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ ++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ +- bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ ++ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ ++ *.tar.lzma*) \ ++ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.Z*) \ +- uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ ++ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ +- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | unshar ;;\ ++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac +@@ -777,7 +815,7 @@ + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ +- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' ++ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' + distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ +@@ -802,7 +840,7 @@ + installdirs: installdirs-recursive + installdirs-am: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(includedir)"; do \ +- test -z "$$dir" || $(mkdir_p) "$$dir"; \ ++ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done + install: install-recursive + install-exec: install-exec-recursive +@@ -823,7 +861,7 @@ + clean-generic: + + distclean-generic: +- -rm -f $(CONFIG_CLEAN_FILES) ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -853,12 +891,20 @@ + install-data-am: install-includeHEADERS install-nodist_includeHEADERS \ + install-pkgconfigDATA + ++install-dvi: install-dvi-recursive ++ + install-exec-am: install-binSCRIPTS install-libLTLIBRARIES + ++install-html: install-html-recursive ++ + install-info: install-info-recursive + + install-man: + ++install-pdf: install-pdf-recursive ++ ++install-ps: install-ps-recursive ++ + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -882,31 +928,33 @@ + ps-am: + + uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \ +- uninstall-info-am uninstall-libLTLIBRARIES \ +- uninstall-nodist_includeHEADERS uninstall-pkgconfigDATA ++ uninstall-libLTLIBRARIES uninstall-nodist_includeHEADERS \ ++ uninstall-pkgconfigDATA + +-uninstall-info: uninstall-info-recursive ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ ++ install-strip + +-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ +- check-am clean clean-generic clean-libLTLIBRARIES \ +- clean-libtool clean-recursive ctags ctags-recursive dist \ +- dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \ +- distcheck distclean distclean-compile distclean-generic \ +- distclean-hdr distclean-libtool distclean-recursive \ ++.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ ++ all all-am am--refresh check check-am clean clean-generic \ ++ clean-libLTLIBRARIES clean-libtool ctags ctags-recursive dist \ ++ dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \ ++ dist-zip distcheck distclean distclean-compile \ ++ distclean-generic distclean-hdr distclean-libtool \ + distclean-tags distcleancheck distdir distuninstallcheck dvi \ + dvi-am html html-am info info-am install install-am \ +- install-binSCRIPTS install-data install-data-am install-exec \ +- install-exec-am install-includeHEADERS install-info \ ++ install-binSCRIPTS install-data install-data-am install-dvi \ ++ install-dvi-am install-exec install-exec-am install-html \ ++ install-html-am install-includeHEADERS install-info \ + install-info-am install-libLTLIBRARIES install-man \ +- install-nodist_includeHEADERS install-pkgconfigDATA \ +- install-strip installcheck installcheck-am installdirs \ +- installdirs-am maintainer-clean maintainer-clean-generic \ +- maintainer-clean-recursive mostlyclean mostlyclean-compile \ +- mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ ++ install-nodist_includeHEADERS install-pdf install-pdf-am \ ++ install-pkgconfigDATA install-ps install-ps-am install-strip \ ++ installcheck installcheck-am installdirs installdirs-am \ ++ maintainer-clean maintainer-clean-generic mostlyclean \ ++ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ + uninstall-binSCRIPTS uninstall-includeHEADERS \ +- uninstall-info-am uninstall-libLTLIBRARIES \ +- uninstall-nodist_includeHEADERS uninstall-pkgconfigDATA ++ uninstall-libLTLIBRARIES uninstall-nodist_includeHEADERS \ ++ uninstall-pkgconfigDATA + + + libusb-config: libusb-config.in +--- a/tests/Makefile.in ++++ b/tests/Makefile.in +@@ -1,8 +1,8 @@ +-# Makefile.in generated by automake 1.8.3 from Makefile.am. ++# Makefile.in generated by automake 1.10.1 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,17 +14,11 @@ + + @SET_MAKE@ + +-SOURCES = $(descriptor_test_SOURCES) $(driver_name_SOURCES) $(find_hubs_SOURCES) $(find_mice_SOURCES) $(get_resolution_SOURCES) $(hub_strings_SOURCES) $(id_test_SOURCES) testlibusb.c +- +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +-top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +-INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -36,10 +30,16 @@ + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : ++build_triplet = @build@ + host_triplet = @host@ + noinst_PROGRAMS = testlibusb$(EXEEXT) descriptor_test$(EXEEXT) \ + id_test$(EXEEXT) find_hubs$(EXEEXT) find_mice$(EXEEXT) \ + get_resolution$(EXEEXT) hub_strings$(EXEEXT) $(am__EXEEXT_1) ++TESTS = testlibusb$(EXEEXT) descriptor_test$(EXEEXT) id_test$(EXEEXT) \ ++ find_hubs$(EXEEXT) find_mice$(EXEEXT) get_resolution$(EXEEXT) \ ++ hub_strings$(EXEEXT) $(am__EXEEXT_1) ++XFAIL_TESTS = get_resolution$(EXEEXT) hub_strings$(EXEEXT) \ ++ $(am__EXEEXT_1) + subdir = tests + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +@@ -47,60 +47,63 @@ + $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +-mkinstalldirs = $(mkdir_p) ++mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = + @LINUX_API_TRUE@am__EXEEXT_1 = driver_name$(EXEEXT) + PROGRAMS = $(noinst_PROGRAMS) + am_descriptor_test_OBJECTS = descriptor_test.$(OBJEXT) + descriptor_test_OBJECTS = $(am_descriptor_test_OBJECTS) +-descriptor_test_DEPENDENCIES = $(top_builddir)/libusbpp.la ++descriptor_test_DEPENDENCIES = $(top_builddir)/libusbpp.la \ ++ $(top_builddir)/libusb.la + am_driver_name_OBJECTS = driver_name.$(OBJEXT) + driver_name_OBJECTS = $(am_driver_name_OBJECTS) +-driver_name_DEPENDENCIES = $(top_builddir)/libusbpp.la ++driver_name_DEPENDENCIES = $(top_builddir)/libusbpp.la \ ++ $(top_builddir)/libusb.la + am_find_hubs_OBJECTS = find_hubs.$(OBJEXT) + find_hubs_OBJECTS = $(am_find_hubs_OBJECTS) +-find_hubs_DEPENDENCIES = $(top_builddir)/libusbpp.la ++find_hubs_DEPENDENCIES = $(top_builddir)/libusbpp.la \ ++ $(top_builddir)/libusb.la + am_find_mice_OBJECTS = find_mice.$(OBJEXT) + find_mice_OBJECTS = $(am_find_mice_OBJECTS) +-find_mice_DEPENDENCIES = $(top_builddir)/libusbpp.la ++find_mice_DEPENDENCIES = $(top_builddir)/libusbpp.la \ ++ $(top_builddir)/libusb.la + am_get_resolution_OBJECTS = get_resolution.$(OBJEXT) + get_resolution_OBJECTS = $(am_get_resolution_OBJECTS) +-get_resolution_DEPENDENCIES = $(top_builddir)/libusbpp.la ++get_resolution_DEPENDENCIES = $(top_builddir)/libusbpp.la \ ++ $(top_builddir)/libusb.la + am_hub_strings_OBJECTS = hub_strings.$(OBJEXT) + hub_strings_OBJECTS = $(am_hub_strings_OBJECTS) +-hub_strings_DEPENDENCIES = $(top_builddir)/libusbpp.la ++hub_strings_DEPENDENCIES = $(top_builddir)/libusbpp.la \ ++ $(top_builddir)/libusb.la + am_id_test_OBJECTS = id_test.$(OBJEXT) + id_test_OBJECTS = $(am_id_test_OBJECTS) +-id_test_DEPENDENCIES = $(top_builddir)/libusbpp.la ++id_test_DEPENDENCIES = $(top_builddir)/libusbpp.la \ ++ $(top_builddir)/libusb.la + testlibusb_SOURCES = testlibusb.c + testlibusb_OBJECTS = testlibusb.$(OBJEXT) + testlibusb_DEPENDENCIES = $(top_builddir)/libusb.la + DEFAULT_INCLUDES = + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles +-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/descriptor_test.Po \ +-@AMDEP_TRUE@ ./$(DEPDIR)/driver_name.Po \ +-@AMDEP_TRUE@ ./$(DEPDIR)/find_hubs.Po ./$(DEPDIR)/find_mice.Po \ +-@AMDEP_TRUE@ ./$(DEPDIR)/get_resolution.Po \ +-@AMDEP_TRUE@ ./$(DEPDIR)/hub_strings.Po ./$(DEPDIR)/id_test.Po \ +-@AMDEP_TRUE@ ./$(DEPDIR)/testlibusb.Po + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ +- $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ ++ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +- $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ ++ $(LDFLAGS) -o $@ + CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +-LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ +- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ +- $(AM_CXXFLAGS) $(CXXFLAGS) ++LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ ++ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) + CXXLD = $(CXX) +-CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ +- $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ ++ $(LDFLAGS) -o $@ + SOURCES = $(descriptor_test_SOURCES) $(driver_name_SOURCES) \ + $(find_hubs_SOURCES) $(find_mice_SOURCES) \ + $(get_resolution_SOURCES) $(hub_strings_SOURCES) \ +@@ -113,8 +116,6 @@ + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ +-AMDEP_FALSE = @AMDEP_FALSE@ +-AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -123,10 +124,6 @@ + AWK = @AWK@ + BIGENDIAN = @BIGENDIAN@ + BSD_API = @BSD_API@ +-BSD_API_FALSE = @BSD_API_FALSE@ +-BSD_API_TRUE = @BSD_API_TRUE@ +-BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ +-BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ + CC = @CC@ + CCDEPMODE = @CCDEPMODE@ + CFLAGS = @CFLAGS@ +@@ -138,13 +135,12 @@ + CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DARWIN_API = @DARWIN_API@ +-DARWIN_API_FALSE = @DARWIN_API_FALSE@ +-DARWIN_API_TRUE = @DARWIN_API_TRUE@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ + DOXYGEN = @DOXYGEN@ + DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@ + DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@ ++DSYMUTIL = @DSYMUTIL@ + ECHO = @ECHO@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ +@@ -153,6 +149,8 @@ + EXEEXT = @EXEEXT@ + F77 = @F77@ + FFLAGS = @FFLAGS@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ +@@ -171,15 +169,16 @@ + LIBUSB_MINOR_VERSION = @LIBUSB_MINOR_VERSION@ + LIBUSB_VERSION = @LIBUSB_VERSION@ + LINUX_API = @LINUX_API@ +-LINUX_API_FALSE = @LINUX_API_FALSE@ +-LINUX_API_TRUE = @LINUX_API_TRUE@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + LT_AGE = @LT_AGE@ + LT_CURRENT = @LT_CURRENT@ + LT_RELEASE = @LT_RELEASE@ + LT_REVISION = @LT_REVISION@ ++MAINT = @MAINT@ + MAKEINFO = @MAKEINFO@ ++MKDIR_P = @MKDIR_P@ ++NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ + OSLIBS = @OSLIBS@ + PACKAGE = @PACKAGE@ +@@ -191,79 +190,86 @@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + PKG_CONFIG = @PKG_CONFIG@ + RANLIB = @RANLIB@ ++SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ +-ac_ct_AR = @ac_ct_AR@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ +-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ + bindir = @bindir@ + build = @build@ + build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ ++builddir = @builddir@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + pkgconfigdir = @pkgconfigdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ + AM_CPPFLAGS = -I$(top_srcdir) -I$(top_builddir) $(all_includes) + @LINUX_API_TRUE@OS_SPECIFIC = driver_name + @LINUX_API_TRUE@OS_SPECIFIC_XFAIL = driver_name + testlibusb_LDADD = $(top_builddir)/libusb.la @OSLIBS@ + descriptor_test_SOURCES = descriptor_test.cpp +-descriptor_test_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++descriptor_test_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + id_test_SOURCES = id_test.cpp +-id_test_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++id_test_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + find_hubs_SOURCES = find_hubs.cpp +-find_hubs_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++find_hubs_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + find_mice_SOURCES = find_mice.cpp +-find_mice_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++find_mice_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + get_resolution_SOURCES = get_resolution.cpp +-get_resolution_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++get_resolution_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + hub_strings_SOURCES = hub_strings.cpp +-hub_strings_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ ++hub_strings_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + driver_name_SOURCES = driver_name.cpp +-driver_name_LDADD = $(top_builddir)/libusbpp.la @OSLIBS@ +-TESTS = testlibusb descriptor_test id_test find_hubs find_mice \ +- get_resolution hub_strings $(OS_SPECIFIC) +- +-XFAIL_TESTS = get_resolution hub_strings $(OS_SPECIFIC_XFAIL) ++driver_name_LDADD = $(top_builddir)/libusbpp.la $(top_builddir)/libusb.la @OSLIBS@ + all: all-am + + .SUFFIXES: + .SUFFIXES: .c .cpp .lo .o .obj +-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +@@ -288,9 +294,9 @@ + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +-$(top_srcdir)/configure: $(am__configure_deps) ++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + + clean-noinstPROGRAMS: +@@ -301,28 +307,28 @@ + done + descriptor_test$(EXEEXT): $(descriptor_test_OBJECTS) $(descriptor_test_DEPENDENCIES) + @rm -f descriptor_test$(EXEEXT) +- $(CXXLINK) $(descriptor_test_LDFLAGS) $(descriptor_test_OBJECTS) $(descriptor_test_LDADD) $(LIBS) ++ $(CXXLINK) $(descriptor_test_OBJECTS) $(descriptor_test_LDADD) $(LIBS) + driver_name$(EXEEXT): $(driver_name_OBJECTS) $(driver_name_DEPENDENCIES) + @rm -f driver_name$(EXEEXT) +- $(CXXLINK) $(driver_name_LDFLAGS) $(driver_name_OBJECTS) $(driver_name_LDADD) $(LIBS) ++ $(CXXLINK) $(driver_name_OBJECTS) $(driver_name_LDADD) $(LIBS) + find_hubs$(EXEEXT): $(find_hubs_OBJECTS) $(find_hubs_DEPENDENCIES) + @rm -f find_hubs$(EXEEXT) +- $(CXXLINK) $(find_hubs_LDFLAGS) $(find_hubs_OBJECTS) $(find_hubs_LDADD) $(LIBS) ++ $(CXXLINK) $(find_hubs_OBJECTS) $(find_hubs_LDADD) $(LIBS) + find_mice$(EXEEXT): $(find_mice_OBJECTS) $(find_mice_DEPENDENCIES) + @rm -f find_mice$(EXEEXT) +- $(CXXLINK) $(find_mice_LDFLAGS) $(find_mice_OBJECTS) $(find_mice_LDADD) $(LIBS) ++ $(CXXLINK) $(find_mice_OBJECTS) $(find_mice_LDADD) $(LIBS) + get_resolution$(EXEEXT): $(get_resolution_OBJECTS) $(get_resolution_DEPENDENCIES) + @rm -f get_resolution$(EXEEXT) +- $(CXXLINK) $(get_resolution_LDFLAGS) $(get_resolution_OBJECTS) $(get_resolution_LDADD) $(LIBS) ++ $(CXXLINK) $(get_resolution_OBJECTS) $(get_resolution_LDADD) $(LIBS) + hub_strings$(EXEEXT): $(hub_strings_OBJECTS) $(hub_strings_DEPENDENCIES) + @rm -f hub_strings$(EXEEXT) +- $(CXXLINK) $(hub_strings_LDFLAGS) $(hub_strings_OBJECTS) $(hub_strings_LDADD) $(LIBS) ++ $(CXXLINK) $(hub_strings_OBJECTS) $(hub_strings_LDADD) $(LIBS) + id_test$(EXEEXT): $(id_test_OBJECTS) $(id_test_DEPENDENCIES) + @rm -f id_test$(EXEEXT) +- $(CXXLINK) $(id_test_LDFLAGS) $(id_test_OBJECTS) $(id_test_LDADD) $(LIBS) ++ $(CXXLINK) $(id_test_OBJECTS) $(id_test_LDADD) $(LIBS) + testlibusb$(EXEEXT): $(testlibusb_OBJECTS) $(testlibusb_DEPENDENCIES) + @rm -f testlibusb$(EXEEXT) +- $(LINK) $(testlibusb_LDFLAGS) $(testlibusb_OBJECTS) $(testlibusb_LDADD) $(LIBS) ++ $(LINK) $(testlibusb_OBJECTS) $(testlibusb_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -340,51 +346,51 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testlibusb.Po@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ ++@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ ++@am__fastdepCC_TRUE@ mv -f $$depbase.Tpo $$depbase.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ $< + + .c.obj: +-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ ++@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ ++@am__fastdepCC_TRUE@ mv -f $$depbase.Tpo $$depbase.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ ++@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ ++@am__fastdepCC_TRUE@ mv -f $$depbase.Tpo $$depbase.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + + .cpp.o: +-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ ++@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ ++@am__fastdepCXX_TRUE@ mv -f $$depbase.Tpo $$depbase.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< + + .cpp.obj: +-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ ++@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ ++@am__fastdepCXX_TRUE@ mv -f $$depbase.Tpo $$depbase.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + + .cpp.lo: +-@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ ++@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ ++@am__fastdepCXX_TRUE@ mv -f $$depbase.Tpo $$depbase.Plo + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ +-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< + + mostlyclean-libtool: +@@ -393,17 +399,13 @@ + clean-libtool: + -rm -rf .libs _libs + +-distclean-libtool: +- -rm -f libtool +-uninstall-info-am: +- + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique + tags: TAGS + +@@ -415,22 +417,23 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$tags$$unique" \ +- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ +- here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique +@@ -444,9 +447,9 @@ + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + check-TESTS: $(TESTS) +- @failed=0; all=0; xfail=0; xpass=0; skip=0; \ ++ @failed=0; all=0; xfail=0; xpass=0; skip=0; ws='[ ]'; \ + srcdir=$(srcdir); export srcdir; \ +- list='$(TESTS)'; \ ++ list=' $(TESTS) '; \ + if test -n "$$list"; then \ + for tst in $$list; do \ + if test -f ./$$tst; then dir=./; \ +@@ -455,7 +458,7 @@ + if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ +- *" $$tst "*) \ ++ *$$ws$$tst$$ws*) \ + xpass=`expr $$xpass + 1`; \ + failed=`expr $$failed + 1`; \ + echo "XPASS: $$tst"; \ +@@ -467,7 +470,7 @@ + elif test $$? -ne 77; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ +- *" $$tst "*) \ ++ *$$ws$$tst$$ws*) \ + xfail=`expr $$xfail + 1`; \ + echo "XFAIL: $$tst"; \ + ;; \ +@@ -498,41 +501,40 @@ + skipped=""; \ + if test "$$skip" -ne 0; then \ + skipped="($$skip tests were not run)"; \ +- test `echo "$$skipped" | wc -c` -gt `echo "$$banner" | wc -c` && \ ++ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ + dashes="$$skipped"; \ + fi; \ + report=""; \ + if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ + report="Please report to $(PACKAGE_BUGREPORT)"; \ +- test `echo "$$report" | wc -c` -gt `echo "$$banner" | wc -c` && \ ++ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ + dashes="$$report"; \ + fi; \ + dashes=`echo "$$dashes" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ +- test -n "$$skipped" && echo "$$skipped"; \ +- test -n "$$report" && echo "$$report"; \ ++ test -z "$$skipped" || echo "$$skipped"; \ ++ test -z "$$report" || echo "$$report"; \ + echo "$$dashes"; \ + test "$$failed" -eq 0; \ + else :; fi + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ +- list='$(DISTFILES)'; for file in $$list; do \ +- case $$file in \ +- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ +- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ +- esac; \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ +- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ +- dir="/$$dir"; \ +- $(mkdir_p) "$(distdir)$$dir"; \ +- else \ +- dir=''; \ +- fi; \ + if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +@@ -567,7 +569,7 @@ + clean-generic: + + distclean-generic: +- -rm -f $(CONFIG_CLEAN_FILES) ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -581,7 +583,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-libtool distclean-tags ++ distclean-tags + + dvi: dvi-am + +@@ -595,12 +597,20 @@ + + install-data-am: + ++install-dvi: install-dvi-am ++ + install-exec-am: + ++install-html: install-html-am ++ + install-info: install-info-am + + install-man: + ++install-pdf: install-pdf-am ++ ++install-ps: install-ps-am ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -621,19 +631,23 @@ + + ps-am: + +-uninstall-am: uninstall-info-am ++uninstall-am: ++ ++.MAKE: install-am install-strip + + .PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \ + clean-generic clean-libtool clean-noinstPROGRAMS ctags \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-exec install-exec-am install-info \ +- install-info-am install-man install-strip installcheck \ ++ install-data-am install-dvi install-dvi-am install-exec \ ++ install-exec-am install-html install-html-am install-info \ ++ install-info-am install-man install-pdf install-pdf-am \ ++ install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- tags uninstall uninstall-am uninstall-info-am ++ tags uninstall uninstall-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. --- libusb-0.1.12.orig/debian/patches/02_usbpp.diff +++ libusb-0.1.12/debian/patches/02_usbpp.diff @@ -0,0 +1,15 @@ +--- + usbpp.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/usbpp.h ++++ b/usbpp.h +@@ -54,7 +54,7 @@ + * \returns the number of bytes sent, or a negative value on + * failure + */ +- int bulkWrite(QByteArray message, int timeout = 100); ++ int bulkWrite(unsigned char* message, int timeout = 100); + + /** + * \brief Bulk read --- libusb-0.1.12.orig/debian/patches/08_bus_location.diff +++ libusb-0.1.12/debian/patches/08_bus_location.diff @@ -0,0 +1,10 @@ +--- a/linux.c ++++ b/linux.c +@@ -355,6 +355,7 @@ + + strncpy(bus->dirname, entry->d_name, sizeof(bus->dirname) - 1); + bus->dirname[sizeof(bus->dirname) - 1] = 0; ++ bus->location = atoi(bus->dirname); + + LIST_ADD(fbus, bus); + --- libusb-0.1.12.orig/debian/patches/series +++ libusb-0.1.12/debian/patches/series @@ -0,0 +1,11 @@ +00_packed.diff +01_ansi.diff +02_usbpp.diff +03_const_buffers.diff +04_infinite_loop.diff +05_emdebian_libs.diff +06_bsd.diff +07_altsetting_alloc.diff +08_bus_location.diff +90_am_maintainer_mode.diff +91_autoreconf.diff --- libusb-0.1.12.orig/debian/patches/04_infinite_loop.diff +++ libusb-0.1.12/debian/patches/04_infinite_loop.diff @@ -0,0 +1,31 @@ +--- + linux.c | 12 +++++++++--- + 1 file changed, 9 insertions(+), 3 deletions(-) + +--- a/linux.c ++++ b/linux.c +@@ -213,15 +213,21 @@ + return ret; + } + +- FD_ZERO(&writefds); +- FD_SET(dev->fd, &writefds); +- + restart: + waiting = 1; + context = NULL; + while (!urb.usercontext && ((ret = ioctl(dev->fd, IOCTL_USB_REAPURBNDELAY, &context)) == -1) && waiting) { ++ if (ret == -1) ++ { ++ if (errno == ENODEV) ++ { ++ return -ENODEV; ++ } ++ } + tv.tv_sec = 0; + tv.tv_usec = 1000; // 1 msec ++ FD_ZERO(&writefds); ++ FD_SET(dev->fd, &writefds); + select(dev->fd + 1, NULL, &writefds, NULL, &tv); //sub second wait + + if (timeout) { --- libusb-0.1.12.orig/debian/source/format +++ libusb-0.1.12/debian/source/format @@ -0,0 +1 @@ +1.0