--- screentest-2.0.orig/screentest.1
+++ screentest-2.0/screentest.1
@@ -0,0 +1,27 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH SCREENTEST 1 "September 21, 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+screentest \- utility for testing the quality of CRT screens.
+.SH SYNOPSIS
+.B screentest
+.SH DESCRIPTION
+It displays various patterns and allows you to estimate the quality of your CRT monitor. You can add new test modes, see the /usr/share/doc/screentest/NEW_TESTS file for details. This manual page was written for the Debian distribution
+because the original program does not have a manual page.
+.SH AUTHOR
+This manual page was written by Rafal Zawadzki <bluszcz@ats.com.pl>,
+for the Debian GNU/Linux system (but may be used by others).
--- screentest-2.0.orig/config.sub
+++ screentest-2.0/config.sub
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
 #   Inc.
 
-timestamp='2007-01-18'
+timestamp='2007-06-28'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -475,8 +475,8 @@
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16c)
-		basic_machine=cr16c-unknown
+	cr16)
+		basic_machine=cr16-unknown
 		os=-elf
 		;;
 	crds | unos)
@@ -683,6 +683,10 @@
 		basic_machine=i386-pc
 		os=-mingw32
 		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
--- screentest-2.0.orig/configure.ac
+++ screentest-2.0/configure.ac
@@ -18,7 +18,7 @@
 AC_SUBST(GLADE_CFLAGS)
 AC_SUBST(GLADE_LIBS)
 
-ALL_LINGUAS="de"
+ALL_LINGUAS="da de fi fr"
 AM_GLIB_GNU_GETTEXT
 AM_GLIB_DEFINE_LOCALEDIR(LOCALEDIR)
 GETTEXT_PACKAGE=$PACKAGE
--- screentest-2.0.orig/configure
+++ screentest-2.0/configure
@@ -21002,7 +21002,7 @@
 
 
 
-ALL_LINGUAS="de"
+ALL_LINGUAS="da de fi fr"
 
 
 for ac_header in locale.h
--- screentest-2.0.orig/config.guess
+++ screentest-2.0/config.guess
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
 #   Inc.
 
-timestamp='2007-03-06'
+timestamp='2007-07-22'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -330,7 +330,7 @@
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
-    i86pc:SunOS:5.*:*)
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
@@ -793,7 +793,7 @@
 	exit ;;
     *:Interix*:[3456]*)
     	case ${UNAME_MACHINE} in
-	    x86) 
+	    x86)
 		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
 	    EM64T | authenticamd)
--- screentest-2.0.orig/config.status.lineno
+++ screentest-2.0/config.status.lineno
@@ -0,0 +1,1101 @@
+#! /bin/sh
+# Generated by configure.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=${CONFIG_SHELL-/bin/sh}
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+  as_lineno_1=157
+  as_lineno_2=158
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+  # Create $as_me.lineno as a copy of $as_myself, but with 162
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line after each line using 164; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing 166, and appends
+  # trailing '-' during substitution so that 167 is not a special
+  # case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+    as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+
+# Save the log message, to keep $[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by screentest $as_me 2.0, which was
+generated by GNU Autoconf 2.61.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+# Files that config.status was made for.
+config_files=" Makefile po/Makefile.in"
+config_headers=" config.h"
+config_commands=" depfiles default-1"
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet      do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+		   instantiate the configuration file FILE
+  --header=FILE[:TEMPLATE]
+		   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+
+ac_cs_version="\
+screentest config.status 2.0
+configured by ./configure, generated by GNU Autoconf 2.61,
+  with options \"'--host=i486-linux-gnu' '--build=i486-linux-gnu' '--prefix=/usr' '--mandir=\${prefix}/share/man' '--infodir=\${prefix}/share/info' 'build_alias=i486-linux-gnu' 'host_alias=i486-linux-gnu'\"
+
+Copyright (C) 2006 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='/home/cate/packages/screentest/screentest-2.0'
+srcdir='.'
+INSTALL='/usr/bin/install -c'
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    { echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+if $ac_cs_recheck; then
+  echo "running CONFIG_SHELL=/bin/sh /bin/sh ./configure " '--host=i486-linux-gnu' '--build=i486-linux-gnu' '--prefix=/usr' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' 'build_alias=i486-linux-gnu' 'host_alias=i486-linux-gnu' $ac_configure_extra_args " --no-create --no-recursion" >&6
+  CONFIG_SHELL=/bin/sh
+  export CONFIG_SHELL
+  exec /bin/sh "./configure" '--host=i486-linux-gnu' '--build=i486-linux-gnu' '--prefix=/usr' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' 'build_alias=i486-linux-gnu' 'host_alias=i486-linux-gnu' $ac_configure_extra_args --no-create --no-recursion
+fi
+
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  echo "$ac_log"
+} >&5
+
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="" ac_aux_dir="."
+
+
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+
+  *) { { echo "$as_me:444: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} ||
+{
+   echo "$me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+#
+# Set up the sed scripts for CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "$CONFIG_FILES"; then
+
+cat >"$tmp/subs-1.sed" <<\CEOF
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@SHELL@,|#_!!_#|/bin/sh,g
+s,@PATH_SEPARATOR@,|#_!!_#|:,g
+s,@PACKAGE_NAME@,|#_!!_#|screentest,g
+s,@PACKAGE_TARNAME@,|#_!!_#|screentest,g
+s,@PACKAGE_VERSION@,|#_!!_#|2.0,g
+s,@PACKAGE_STRING@,|#_!!_#|screentest 2.0,g
+s,@PACKAGE_BUGREPORT@,|#_!!_#|,g
+s,@exec_prefix@,|#_!!_#|${prefix},g
+s,@prefix@,|#_!!_#|/usr,g
+s,@program_transform_name@,|#_!!_#|s\,x\,x\,,g
+s,@bindir@,|#_!!_#|${exec_prefix}/bin,g
+s,@sbindir@,|#_!!_#|${exec_prefix}/sbin,g
+s,@libexecdir@,|#_!!_#|${exec_prefix}/libexec,g
+s,@datarootdir@,|#_!!_#|${prefix}/share,g
+s,@datadir@,|#_!!_#|${datarootdir},g
+s,@sysconfdir@,|#_!!_#|${prefix}/etc,g
+s,@sharedstatedir@,|#_!!_#|${prefix}/com,g
+s,@localstatedir@,|#_!!_#|${prefix}/var,g
+s,@includedir@,|#_!!_#|${prefix}/include,g
+s,@oldincludedir@,|#_!!_#|/usr/include,g
+s,@docdir@,|#_!!_#|${datarootdir}/doc/${PACKAGE_TARNAME},g
+s,@infodir@,|#_!!_#|${prefix}/share/info,g
+s,@htmldir@,|#_!!_#|${docdir},g
+s,@dvidir@,|#_!!_#|${docdir},g
+s,@pdfdir@,|#_!!_#|${docdir},g
+s,@psdir@,|#_!!_#|${docdir},g
+s,@libdir@,|#_!!_#|${exec_prefix}/lib,g
+s,@localedir@,|#_!!_#|/usr/share/locale,g
+s,@mandir@,|#_!!_#|${prefix}/share/man,g
+s,@DEFS@,|#_!!_#|-DHAVE_CONFIG_H,g
+s,@ECHO_C@,|#_!!_#|,g
+s,@ECHO_N@,|#_!!_#|-n,g
+s,@ECHO_T@,|#_!!_#|,g
+s,@LIBS@,|#_!!_#|,g
+s,@build_alias@,|#_!!_#|i486-linux-gnu,g
+s,@host_alias@,|#_!!_#|i486-linux-gnu,g
+s,@target_alias@,|#_!!_#|,g
+s,@INSTALL_PROGRAM@,|#_!!_#|${INSTALL},g
+s,@INSTALL_SCRIPT@,|#_!!_#|${INSTALL},g
+s,@INSTALL_DATA@,|#_!!_#|${INSTALL} -m 644,g
+s,@CYGPATH_W@,|#_!!_#|echo,g
+s,@PACKAGE@,|#_!!_#|screentest,g
+s,@VERSION@,|#_!!_#|2.0,g
+s,@ACLOCAL@,|#_!!_#|${SHELL} /home/cate/packages/screentest/screentest-2.0/missing --run aclocal-1.9,g
+s,@AUTOCONF@,|#_!!_#|${SHELL} /home/cate/packages/screentest/screentest-2.0/missing --run autoconf,g
+s,@AUTOMAKE@,|#_!!_#|${SHELL} /home/cate/packages/screentest/screentest-2.0/missing --run automake-1.9,g
+s,@AUTOHEADER@,|#_!!_#|${SHELL} /home/cate/packages/screentest/screentest-2.0/missing --run autoheader,g
+s,@MAKEINFO@,|#_!!_#|${SHELL} /home/cate/packages/screentest/screentest-2.0/missing --run makeinfo,g
+s,@install_sh@,|#_!!_#|/home/cate/packages/screentest/screentest-2.0/install-sh,g
+s,@STRIP@,|#_!!_#|strip,g
+s,@INSTALL_STRIP_PROGRAM@,|#_!!_#|${SHELL} $(install_sh) -c -s,g
+s,@mkdir_p@,|#_!!_#|mkdir -p --,g
+s,@AWK@,|#_!!_#|gawk,g
+s,@SET_MAKE@,|#_!!_#|,g
+s,@am__leading_dot@,|#_!!_#|.,g
+s,@AMTAR@,|#_!!_#|${SHELL} /home/cate/packages/screentest/screentest-2.0/missing --run tar,g
+s,@am__tar@,|#_!!_#|${AMTAR} chof - "$$tardir",g
+s,@am__untar@,|#_!!_#|${AMTAR} xf -,g
+s,@MAINTAINER_MODE_TRUE@,|#_!!_#|#,g
+s,@MAINTAINER_MODE_FALSE@,|#_!!_#|,g
+s,@MAINT@,|#_!!_#|#,g
+s,@CC@,|#_!!_#|i486-linux-gnu-gcc,g
+s,@CFLAGS@,|#_!!_#|-g -O2 -Wall,g
+s,@LDFLAGS@,|#_!!_#|,g
+s,@CPPFLAGS@,|#_!!_#|,g
+s,@ac_ct_CC@,|#_!!_#|,g
+s,@EXEEXT@,|#_!!_#|,g
+s,@OBJEXT@,|#_!!_#|o,g
+s,@DEPDIR@,|#_!!_#|.deps,g
+s,@am__include@,|#_!!_#|include,g
+s,@am__quote@,|#_!!_#|,g
+s,@AMDEP_TRUE@,|#_!!_#|,g
+s,@AMDEP_FALSE@,|#_!!_#|#,g
+s,@AMDEPBACKSLASH@,|#_!!_#|\\,g
+s,@CCDEPMODE@,|#_!!_#|depmode=gcc3,g
+s,@am__fastdepCC_TRUE@,|#_!!_#|,g
+s,@am__fastdepCC_FALSE@,|#_!!_#|#,g
+s,@build@,|#_!!_#|i486-pc-linux-gnu,g
+s,@build_cpu@,|#_!!_#|i486,g
+s,@build_vendor@,|#_!!_#|pc,g
+s,@build_os@,|#_!!_#|linux-gnu,g
+s,@host@,|#_!!_#|i486-pc-linux-gnu,g
+s,@host_cpu@,|#_!!_#|i486,g
+s,@host_vendor@,|#_!!_#|pc,g
+s,@host_os@,|#_!!_#|linux-gnu,g
+s,@SED@,|#_!!_#|/bin/sed,g
+s,@GREP@,|#_!!_#|/bin/grep,g
+s,@EGREP@,|#_!!_#|/bin/grep -E,g
+s,@LN_S@,|#_!!_#|ln -s,g
+s,@ECHO@,|#_!!_#|echo,g
+s,@AR@,|#_!!_#|ar,g
+s,@RANLIB@,|#_!!_#|ranlib,g
+s,@CPP@,|#_!!_#|i486-linux-gnu-gcc -E,g
+s,@CXX@,|#_!!_#|i486-linux-gnu-g++,g
+s,@CXXFLAGS@,|#_!!_#|-g -O2,g
+s,@ac_ct_CXX@,|#_!!_#|,g
+s,@CXXDEPMODE@,|#_!!_#|depmode=gcc3,g
+CEOF
+cat >"$tmp/subs-2.sed" <<\CEOF
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+s,@am__fastdepCXX_TRUE@,|#_!!_#|,g
+s,@am__fastdepCXX_FALSE@,|#_!!_#|#,g
+s,@CXXCPP@,|#_!!_#|i486-linux-gnu-g++ -E,g
+s,@F77@,|#_!!_#|,g
+s,@FFLAGS@,|#_!!_#|,g
+s,@ac_ct_F77@,|#_!!_#|,g
+s,@LIBTOOL@,|#_!!_#|$(SHELL) $(top_builddir)/libtool,g
+s,@PKG_CONFIG@,|#_!!_#|/usr/bin/pkg-config,g
+s,@GTK_CFLAGS@,|#_!!_#|-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12  ,g
+s,@GTK_LIBS@,|#_!!_#|-lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lfontconfig -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXfixes -lpango-1.0 -lcairo -lX11 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0  ,g
+s,@GLADE_CFLAGS@,|#_!!_#|-I/usr/include/libglade-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libxml2 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12  ,g
+s,@GLADE_LIBS@,|#_!!_#|-lglade-2.0 -lgtk-x11-2.0 -lxml2 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lfontconfig -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXfixes -lpango-1.0 -lcairo -lX11 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0  ,g
+s,@USE_NLS@,|#_!!_#|yes,g
+s,@MSGFMT@,|#_!!_#|/usr/bin/msgfmt,g
+s,@MSGFMT_OPTS@,|#_!!_#|-c,g
+s,@GMSGFMT@,|#_!!_#|/usr/bin/msgfmt,g
+s,@XGETTEXT@,|#_!!_#|/usr/bin/xgettext,g
+s,@CATALOGS@,|#_!!_#| de.gmo,g
+s,@CATOBJEXT@,|#_!!_#|.gmo,g
+s,@DATADIRNAME@,|#_!!_#|share,g
+s,@GMOFILES@,|#_!!_#| de.gmo,g
+s,@INSTOBJEXT@,|#_!!_#|.mo,g
+s,@INTLLIBS@,|#_!!_#|,g
+s,@PO_IN_DATADIR_TRUE@,|#_!!_#|,g
+s,@PO_IN_DATADIR_FALSE@,|#_!!_#|,g
+s,@POFILES@,|#_!!_#| de.po,g
+s,@POSUB@,|#_!!_#|po,g
+s,@MKINSTALLDIRS@,|#_!!_#|./mkinstalldirs,g
+s,@GETTEXT_PACKAGE@,|#_!!_#|screentest,g
+s,@LIBOBJS@,|#_!!_#|,g
+s,@LTLIBOBJS@,|#_!!_#|,g
+:end
+s/|#_!!_#|//g
+CEOF
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) { { echo "$as_me:644: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+   { (exit 1); exit 1; }; };;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   { { echo "$as_me:674: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+   { (exit 1); exit 1; }; };;
+      esac
+      ac_file_inputs="$ac_file_inputs $ac_f"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input="Generated from "`IFS=:
+	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { echo "$as_me:688: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    fi
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin";;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:759: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+   { (exit 1); exit 1; }; }; }
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { echo "$as_me:823: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+  ac_datarootdir_hack='
+  s&@datadir@&${datarootdir}&g
+  s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g
+  s&@infodir@&${prefix}/share/info&g
+  s&@localedir@&/usr/share/locale&g
+  s&@mandir@&${prefix}/share/man&g
+    s&\${datarootdir}&${prefix}/share&g' ;;
+esac
+  sed "/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}
+
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { echo "$as_me:860: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out"; rm -f "$tmp/out";;
+  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+  esac
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+    # First, check the format of the line:
+    cat >"$tmp/defines.sed" <<\CEOF
+/^[	 ]*#[	 ]*undef[	 ][	 ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[	 ]*$/b def
+/^[	 ]*#[	 ]*define[	 ][	 ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[(	 ]/b def
+b
+:def
+s/$/ /
+s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_NAME\)[	 (].*,\1define\2 "screentest" ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_TARNAME\)[	 (].*,\1define\2 "screentest" ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_VERSION\)[	 (].*,\1define\2 "2.0" ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_STRING\)[	 (].*,\1define\2 "screentest 2.0" ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_BUGREPORT\)[	 (].*,\1define\2 "" ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE\)[	 (].*,\1define\2 "screentest" ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*VERSION\)[	 (].*,\1define\2 "2.0" ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*STDC_HEADERS\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_SYS_TYPES_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_SYS_STAT_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STDLIB_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRING_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_MEMORY_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRINGS_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_INTTYPES_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STDINT_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_UNISTD_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_DLFCN_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*STDC_HEADERS\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_LOCALE_H\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_LC_MESSAGES\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_BIND_TEXTDOMAIN_CODESET\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_GETTEXT\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_DCGETTEXT\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*ENABLE_NLS\)[	 (].*,\1define\2 1 ,
+s,^\([	 #]*\)[^	 ]*\([	 ]*LOCALEDIR\)[	 (].*,\1define\2 "/usr/share/locale" ,
+s/ $//
+s,^[	 #]*u.*,/* & */,
+CEOF
+    sed -f "$tmp/defines.sed" $ac_file_inputs >"$tmp/out1"
+ac_result="$tmp/out1"
+  if test x"$ac_file" != x-; then
+    echo "/* $configure_input  */" >"$tmp/config.h"
+    cat "$ac_result" >>"$tmp/config.h"
+    if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
+      { echo "$as_me:917: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f $ac_file
+      mv "$tmp/config.h" $ac_file
+    fi
+  else
+    echo "/* $configure_input  */"
+    cat "$ac_result"
+  fi
+  rm -f "$tmp/out12"
+# Compute $ac_file's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $ac_file | $ac_file:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X$ac_file : 'X\(//\)[^/]' \| \
+	 X$ac_file : 'X\(//\)$' \| \
+	 X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
+echo X$ac_file |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { echo "$as_me:963: executing $ac_file commands" >&5
+echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  else
+    continue
+  fi
+  # Extract the definition of DEPDIR, am__include, and am__quote
+  # from the Makefile without running `make'.
+  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  am__include=`sed -n 's/^am__include = //p' < "$mf"`
+  test -z "am__include" && continue
+  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n 's/^U = //p' < "$mf"`
+  # Find all dependency output files, they are included files with
+  # $(DEPDIR) in their names.  We invoke sed twice because it is the
+  # simplest approach to changing $(DEPDIR) to its actual value in the
+  # expansion.
+  for file in `sed -n "
+    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    { as_dir=$dirpart/$fdir
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:1085: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+   { (exit 1); exit 1; }; }; }
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+ ;;
+    "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*)
+        sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
+      esac ;;
+
+  esac
+done # for ac_tag
+
+
+{ (exit 0); exit 0; }
--- screentest-2.0.orig/basic_test.c
+++ screentest-2.0/basic_test.c
@@ -63,6 +63,8 @@
 
 static void basic_draw(GtkWidget * widget)
 {
+	bind_textdomain_codeset(PACKAGE, "ISO-8859-1");
+
 	GdkWindow *win = widget->window;
 	gint w, h;
 	gint i, b, d;
--- screentest-2.0.orig/debian/dirs
+++ screentest-2.0/debian/dirs
@@ -0,0 +1 @@
+usr/bin
--- screentest-2.0.orig/debian/watch
+++ screentest-2.0/debian/watch
@@ -0,0 +1,2 @@
+version=3
+http://sf.net/screentest/screentest-(.*)\.tar\.gz
--- screentest-2.0.orig/debian/rules
+++ screentest-2.0/debian/rules
@@ -0,0 +1,116 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# GNU copyright 1997 to 1999 by Joey Hess.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# This is the debhelper compatibility version to use.
+#export DH_COMPAT=3
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+
+ifneq (,$(findstring debug,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -g
+endif
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+	INSTALL_PROGRAM += -s
+endif
+
+
+
+config.status:
+	dh_testdir
+	#-test -r /usr/share/misc/config.sub && \
+	#  cp -f /usr/share/misc/config.sub config.sub
+	#-test -r /usr/share/misc/config.guess && \
+	#  cp -f /usr/share/misc/config.guess config.guess
+	# Add here commands to configure the package.
+	#cp -f /usr/share/automake-1.10/depcomp depcomp
+	#aclocal-1.10 && automake-1.10 && autoconf
+	./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \
+          --prefix=/usr --mandir=\$${prefix}/share/man \
+          --infodir=\$${prefix}/share/info
+
+
+build: build-stamp
+
+build-stamp:  config.status
+	dh_testdir
+
+	# Add here commands to compile the package.
+	$(MAKE)
+	#/usr/bin/docbook-to-man debian/screentest.sgml > screentest.1
+
+	touch build-stamp
+
+dist_clean:
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp 
+
+	# Add here commands to clean up after the build process.
+	[ ! -f Makefile ] || $(MAKE) distclean
+	#test -r /usr/share/misc/config.sub && \
+	#  rm -f config.sub
+	#test -r /usr/share/misc/config.guess && \
+	#  rm -f config.guess
+	#-rm -f aclocal.m4
+	#-rm -f depcomp
+	#-rm -f screentest-new.glade
+	#-rm -f configure Makefile.in
+
+	dh_clean
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+
+	# Add here commands to install the package into debian/screentest.
+	$(MAKE) install prefix=$(CURDIR)/debian/screentest/usr
+
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+#	dh_installdebconf	
+	dh_installdocs
+	dh_installexamples
+	dh_installmenu
+#	dh_installlogrotate
+#	dh_installemacsen
+#	dh_installpam
+#	dh_installmime
+#	dh_installinit
+	dh_installcron
+	dh_installman
+	dh_installinfo
+#	dh_undocumented
+	dh_installchangelogs ChangeLog
+	dh_link
+	dh_strip
+	dh_compress
+	dh_fixperms
+#	dh_makeshlibs
+	dh_installdeb
+#	dh_perl
+	dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install 
--- screentest-2.0.orig/debian/docs
+++ screentest-2.0/debian/docs
@@ -0,0 +1,4 @@
+NEWS
+README
+AUTHORS
+NEW_TESTS
--- screentest-2.0.orig/debian/menu
+++ screentest-2.0/debian/menu
@@ -0,0 +1 @@
+?package(screentest):needs="X11" section="Applications/System/Hardware" title="screentest" command="/usr/bin/screentest"
--- screentest-2.0.orig/debian/compat
+++ screentest-2.0/debian/compat
@@ -0,0 +1 @@
+5
--- screentest-2.0.orig/debian/screentest.manpages
+++ screentest-2.0/debian/screentest.manpages
@@ -0,0 +1 @@
+screentest.1
--- screentest-2.0.orig/debian/changelog
+++ screentest-2.0/debian/changelog
@@ -0,0 +1,92 @@
+screentest (2.0-2.1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Properly display non-ASCII characters in main screen. Closes: #670781
+
+  [ New runtime translations ]
+  * French, thanks to Mami Hicham. Closes: #574463
+  * Danish, thanks to Joe Hansen. Closes: #670849
+  * Finish, thanks to Juhani Numminen. Closes: #671706
+
+ -- David Prévot <taffit@debian.org>  Tue, 08 May 2012 18:27:39 -0400
+
+screentest (2.0-2) unstable; urgency=low
+
+  * Usual updates: policy, homepage
+  * Improve debian/copyright
+
+ -- Giacomo Catenazzi <cate@debian.org>  Wed, 12 Aug 2009 20:23:01 +0200
+
+screentest (2.0-1) unstable; urgency=low
+
+  * New upstream release
+  * Update and clean up of debian scripts
+
+ -- Giacomo Catenazzi <cate@debian.org>  Mon, 20 Aug 2007 20:35:25 +0200
+
+screentest (1.0-6) unstable; urgency=low
+
+  * Really don't use any part of old libraries
+
+ -- Giacomo Catenazzi <cate@debian.org>  Wed, 25 Jul 2007 08:37:44 +0200
+
+screentest (1.0-5) unstable; urgency=low
+
+  * New maintainer. Closes: #419214
+  * use newer libgtk and libglib libraries. Closes: #398350
+  * debian/control, Makefile.am: Updated package dependencies (build and runtime)
+  * Makefile.am: don't build static version
+
+ -- Giacomo Catenazzi <cate@debian.org>  Tue, 24 Jul 2007 08:30:06 +0200
+
+screentest (1.0-4) unstable; urgency=low
+
+  * debian/rules, debian/control: Use autotools-dev, autoconf and automake.
+  * Makefile.in, Makefile.am: Moved patch about -lpthread.
+  * Makefile.am, debian/control: Build-depend on libxdmcp-dev and libxau-dev,
+    and use the link flags "-lXdmcp -lXau".  Closes: #365164.
+  * debian/watch: Added.  Closes: #354236.
+  * debian/control: Standards version.
+  * debian/control: Changed my e-mail address.
+
+ -- Bart Martens <bartm@knars.be>  Fri,  5 May 2006 19:18:39 +0200
+
+screentest (1.0-3) unstable; urgency=low
+
+  * New maintainer.  Closes: #352438.
+  * Acknowledging the NMU.  Closes: #192462.  Patch and NMU by Sebastien
+    Bacher <seb128@debian.org>, thanks.
+  * basic_test.c: Change list of button functions.  Closes: #217493.
+  * debian/copyright, debian/control: Added new homepage.
+  * debian/control: Standards version.
+  * debian/compat, debian/rules: debhelper compatibility version.
+  * debian/menu: Fixed lintian unquoted-string-in-menu-item.
+  * debian/control: Fixed lintian
+    description-synopsis-might-not-be-phrased-properly.
+
+ -- Bart Martens <bart.martens@advalvas.be>  Sun, 12 Feb 2006 10:11:18 +0100
+
+screentest (1.0-2.1) unstable; urgency=low
+
+  * NMU to fix a RC bug.
+  * Added -lpthread to LDADD (Closes: #192462).
+  * Fixed dh_make-boilerplate in debian/copyright
+
+ -- Sebastien Bacher <seb128@debian.org>  Thu,  4 Sep 2003 03:43:13 +0200
+
+screentest (1.0-2) unstable; urgency=low
+
+  * Change section to main. Closes: #163997
+
+  * Change description. Closes: #163636
+  			Closes: #163716
+
+ 
+ -- Rafal Zawadzki <bluszcz@ats.com.pl>  Tue,  8 Oct 2002 14:55:53 +0200
+
+screentest (1.0-1) unstable; urgency=low
+
+  * Initial Release.
+
+ -- Rafal Zawadzki <bluszcz@ats.com.pl>  Sat, 21 Sep 2002 13:39:23 +0200
+
--- screentest-2.0.orig/debian/control
+++ screentest-2.0/debian/control
@@ -0,0 +1,17 @@
+Source: screentest
+Section: utils
+Priority: optional
+Maintainer: Giacomo Catenazzi <cate@debian.org>
+Build-Depends: debhelper (>> 5.0.0), libglade2-dev
+Standards-Version: 3.8.2
+Homepage: http://screentest.sourceforge.net/
+
+Package: screentest
+Architecture: any
+Depends: ${shlibs:Depends}
+Description: Utility to test the quality of screens
+ Screentest is a CRT and LCD screen testing utility. Ever wondered how
+ good the quality (sharpness, linearity, convergence, etc.) of your
+ CRT/LCD monitor is? Screentest displays the testing patterns which you
+ can use to evaluate the quality of your monitor.
+
--- screentest-2.0.orig/debian/copyright
+++ screentest-2.0/debian/copyright
@@ -0,0 +1,43 @@
+This package was debianized by Rafal Zawadzki <bluszcz@ats.com.pl> on
+Sat, 21 Sep 2002 13:39:23 +0200.
+
+The current Debian maintainer is Giacomo Catenazzi <cate@debian.org>
+
+It was downloaded from http://www.fi.muni.cz/~kas/ .  The author is currently
+in the process of moving the development to SourceForge. See
+http://screentest.sourceforge.net/ .
+
+Authors: Jans "Yenya" Kasprzak <kas@fi.muni.cz>,
+  Tobias Gruetzmacher <tobias@portfolio16.de>
+
+Copyright:
+
+  Copyright (C) 2001 Jan "Yenya" Kasprzak <kas@fi.muni.cz>
+  Copyright (C) 2006-2007 Tobias Gruetzmacher <tobias@portfolio16.de>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License version 2 as
+  published by the Free Software Foundation.
+ 
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+ 
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+  MA 02110-1301, USA.
+
+On Debian systems, the complete text of the GNU General Public
+License, version 2, can be found in /usr/share/common-licenses/GPL-2.
+
+The main COPYING file include, before the usual GPL2 COPYING file:
+
+  *** This software is postcardware: if you like it, please send a nice ***
+  *** postcard to the author's address (see the file AUTHORS). Sending  ***
+  *** the postcard is optional. The real usage terms are below:         ***
+
+The Debian packaging is (c) 2007-2009, Giacomo Catenazzi <cate@debian.org> and
+is licensed under the GPL-2, see above.
+
--- screentest-2.0.orig/po/fi.po
+++ screentest-2.0/po/fi.po
@@ -0,0 +1,91 @@
+# screentest translation.
+# Copyright (C) 2007 Tobias Gruetzmacher <tobias@portfolio16.de>
+# This file is distributed under the same license as the screentest package.
+# Tobias Gruetzmacher <tobias@portfolio16.de>, 2007.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: screentest 2.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-08-05 21:15+0200\n"
+"PO-Revision-Date: 2012-05-06 08:49+0300\n"
+"Last-Translator: Juhani Numminen <juhaninumminen0@gmail.com>\n"
+"Language-Team: Finnish\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: fi\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: main.c:50
+msgid ""
+"The GLADE interface definition file was not found.\n"
+"Please make sure this program is installed correctly."
+msgstr ""
+"GLADE-käyttöliittymätiedostoa ei löydetty.\n"
+"Varmista, että ohjelma on asennettu kunnolla."
+
+#: callbacks.c:183
+#, c-format
+msgid "No implementation for the test \"%s\" found."
+msgstr "Testille \"%s\" ei löydetty toteutusta."
+
+#: basic_test.c:75
+msgid "Left Button - param cycle, if any"
+msgstr "Vasen painike - parametrien pyöritys, jos on"
+
+#: basic_test.c:76
+msgid "Middle Button - color cycle"
+msgstr "Keskipainike - värien pyöritys"
+
+#: basic_test.c:77
+msgid "Right Button - menu"
+msgstr "Oikea painike - valikko"
+
+#: screentest.glade:7
+msgid "Screen test"
+msgstr "Näyttötesti"
+
+#: screentest.glade:27
+msgid "Mode"
+msgstr "Tila"
+
+#: screentest.glade:34
+msgid "Basic"
+msgstr "Tavallinen"
+
+#: screentest.glade:43
+msgid "Grid"
+msgstr "Ruudukko"
+
+#: screentest.glade:52
+msgid "Horizontal"
+msgstr "Vaakasuuntainen"
+
+#: screentest.glade:61
+msgid "Vertical"
+msgstr "Pystysuuntainen"
+
+#: screentest.glade:70
+msgid "Blink"
+msgstr "Vilkkuva"
+
+#: screentest.glade:79
+msgid "Text"
+msgstr "Teksti"
+
+#: screentest.glade:92
+msgid "Foreground Color"
+msgstr "Edustaväri"
+
+#: screentest.glade:108
+msgid "Background Color"
+msgstr "Taustaväri"
+
+#: screentest.glade:144
+msgid "Select Foreground color"
+msgstr "Valitse edustaväri"
+
+#: screentest.glade:180
+msgid "Select Background color"
+msgstr "Valitse taustaväri"
--- screentest-2.0.orig/po/da.po
+++ screentest-2.0/po/da.po
@@ -0,0 +1,90 @@
+# screentest translation.
+# Copyright (C) 2007 Tobias Gruetzmacher <tobias@portfolio16.de>
+# This file is distributed under the same license as the screentest package.
+# Joe Hansen <joedalton2@yahoo.dk>, 2012.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: screentest 2.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-08-05 21:15+0200\n"
+"PO-Revision-Date: 2012-04-29 17:30+01:00\n"
+"Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
+"Language-Team: Danish <debian-l10n-danish@lists.debian.org> \n"
+"Language: da\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: main.c:50
+msgid ""
+"The GLADE interface definition file was not found.\n"
+"Please make sure this program is installed correctly."
+msgstr ""
+"Definitionsfilen for GLADE-grænsefladen blev ikke fundet.\n"
+"Sikr dig at dette program er korrekt installeret."
+
+#: callbacks.c:183
+#, c-format
+msgid "No implementation for the test \"%s\" found."
+msgstr "Ingen implementering for testen »%s« blev fundet."
+
+#: basic_test.c:75
+msgid "Left Button - param cycle, if any"
+msgstr "Venstre knap - parametercyklus, hvis nogen"
+
+#: basic_test.c:76
+msgid "Middle Button - color cycle"
+msgstr "Midterste knap - farvecyklus"
+
+#: basic_test.c:77
+msgid "Right Button - menu"
+msgstr "Højre knap - menu"
+
+#: screentest.glade:7
+msgid "Screen test"
+msgstr "Skærmtest"
+
+#: screentest.glade:27
+msgid "Mode"
+msgstr "Tilstand"
+
+#: screentest.glade:34
+msgid "Basic"
+msgstr "Basis"
+
+#: screentest.glade:43
+msgid "Grid"
+msgstr "Gitter"
+
+#: screentest.glade:52
+msgid "Horizontal"
+msgstr "Vandret"
+
+#: screentest.glade:61
+msgid "Vertical"
+msgstr "Lodret"
+
+#: screentest.glade:70
+msgid "Blink"
+msgstr "Blink"
+
+#: screentest.glade:79
+msgid "Text"
+msgstr "Tekst"
+
+#: screentest.glade:92
+msgid "Foreground Color"
+msgstr "Forgrundsfarve"
+
+#: screentest.glade:108
+msgid "Background Color"
+msgstr "Baggrundsfarve"
+
+#: screentest.glade:144
+msgid "Select Foreground color"
+msgstr "Vælg forgrundsfarve"
+
+#: screentest.glade:180
+msgid "Select Background color"
+msgstr "Vælg baggrundsfarve"
--- screentest-2.0.orig/po/fr.po
+++ screentest-2.0/po/fr.po
@@ -0,0 +1,94 @@
+# Translation of screentest to French.
+# Copyright (C) 2009 Debian French l10n team <debian-l10n-french@lists.debian.org>
+# This file is distributed under the same license as the screentest package.
+#
+# Translator:
+# Tobias Gruetzmacher <tobias@portfolio16.de>, 2007
+# Mami Hicham <aladin29_86@hotmail.com>, 2009
+msgid ""
+msgstr ""
+"Project-Id-Version: screentest 2.0\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-08-05 21:15+0200\n"
+"PO-Revision-Date: 2009-06-22 20:02+0200\n"
+"Last-Translator: Mami Hicham <aladin29_86@hotmail.com>\n"
+"Language-Team: french<debian-l10n-french@lists.debian.org>\n"
+"Language: fr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"X-Generator: Virtaal 0.3.1\n"
+
+#: main.c:50
+msgid ""
+"The GLADE interface definition file was not found.\n"
+"Please make sure this program is installed correctly."
+msgstr ""
+"Le fichier de définition de l'interface de GLADE n'a pas été trouvé.\n"
+"Veuillez vérifier que le programme a été correctement installé."
+
+#: callbacks.c:183
+#, c-format
+msgid "No implementation for the test \"%s\" found."
+msgstr "Pas d'implémentation trouvée pour le test « %s »."
+
+#: basic_test.c:75
+msgid "Left Button - param cycle, if any"
+msgstr "Bouton gauche - cycle de paramétrage, s'il y en a un"
+
+#: basic_test.c:76
+msgid "Middle Button - color cycle"
+msgstr "Bouton du milieu - couleur du cycle"
+
+#: basic_test.c:77
+msgid "Right Button - menu"
+msgstr "Bouton droit - menu"
+
+#: screentest.glade:7
+msgid "Screen test"
+msgstr "Test d'écran"
+
+#: screentest.glade:27
+msgid "Mode"
+msgstr "Mode"
+
+#: screentest.glade:34
+msgid "Basic"
+msgstr "Basique"
+
+#: screentest.glade:43
+msgid "Grid"
+msgstr "Grille"
+
+#: screentest.glade:52
+msgid "Horizontal"
+msgstr "Horizontal"
+
+#: screentest.glade:61
+msgid "Vertical"
+msgstr "Vertical"
+
+#: screentest.glade:70
+msgid "Blink"
+msgstr "Clignotant"
+
+#: screentest.glade:79
+msgid "Text"
+msgstr "Texte"
+
+#: screentest.glade:92
+msgid "Foreground Color"
+msgstr "Couleur de premier plan"
+
+#: screentest.glade:108
+msgid "Background Color"
+msgstr "Couleur d'arrière-plan"
+
+#: screentest.glade:144
+msgid "Select Foreground color"
+msgstr "Définir la couleur de premier plan"
+
+#: screentest.glade:180
+msgid "Select Background color"
+msgstr "Définir la couleur d'arrière-plan"