--- sword-1.5.11.orig/debian/osis2mod.1.pod +++ sword-1.5.11/debian/osis2mod.1.pod @@ -0,0 +1,74 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +osis2mod - create SWORD module from OSIS + +=head1 SYNOPSIS + +B PATH OSISDOC [OPTIONS] + +=head1 DESCRIPTION + +This utility will create a SWORD module in the specified path from the +OSIS formated input. + +=head1 OPTIONS + +=over + +=item B<-a> + +Augment module if exists (default is to create a new one). + +=item B<-z | -Z> + +Use compression. z - for ZIP; Z - for LZSS. By default no compression is +used. + +=item B<-b N> + +Specify block size. Valid values are (default 4): + +=over + +=item 2 - verses + +=item 3 - chapters + +=item 4 -books + +=back + +=item B<-c CIPHER_KEY> + +Encipher module using supplied key. By default no enciphering is used. + +=item B<-N> + +Do not convert UFT-8 no normalize UTF-8 to NFC. Default is to convert to UTF-8, +if needed, and then normalize to NFC. + +Note: all UTF-8 texts should be normalized to NFC. + +=back + +=head1 Authors + +This manual page was written by Dmitrijs Ledkovs for +Debian project but may be used by others. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/libsword7.dirs +++ sword-1.5.11/debian/libsword7.dirs @@ -0,0 +1,3 @@ +usr/share/sword/mods.d +usr/share/sword/modules + --- sword-1.5.11.orig/debian/tei2mod.1.pod +++ sword-1.5.11/debian/tei2mod.1.pod @@ -0,0 +1,81 @@ +# This is a man page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +tei2mod - tool to convert TEI P5 source into a SWORD module + +=head1 SYNOPSIS + +B outputpath teisource [OPTIONS] + + +=head1 DESCRIPTION + +This utility is used to create SWORD module from a slightly modified +TEI (Text Encoding Initiative) P5 formatted XML source document. The +resulting module will be saved in the outputpath specified. + +=head1 OPTIONS + +=over + +=item B<-z> + +Specifies use of ZIP compression. The default is no compression. + +=item B<-Z> + +Specifies use of LZSS compression. The default is no compression. + +=item B<-s [2|4]> + +Specifies maximum text size per entry. The default is 4. + +=item B<-c cipher_key> + +Specifies that the output will be enciphered with the supplied +cipher_key. The default is plain text output (no encipherment). + +=item B<-N> + +Disables conversion to UTF-8 and normalization of UTF-8 to NFC. The +default is to convert to UTF-8, if needed, and then normalize to NFC. +Note that all UTF-8 texts should be normalized to NFC. + +=back + +=head1 NOTE + +The input format is a subset of TEI P5 with added elements borrowed +from OSIS for verse references. The resulting custom TEI schema is +available at http://www.crosswire.org/osis/teiP5osis.1.4.xsd + +=head1 AUTHORS + +This man page was written by Jonathan Marsden +for the Debian project but may be used by others. + +=head1 SEE ALSO + +=over + +=item http://www.crosswire.org/wiki/TEI_Dictionaries + +=item http://www.crosswire.org/osis/teiP5osis.1.4.xsd + +=item http://www.tei-c.org/release/doc/tei-p5-doc/html/index.html + +=back + +=cut --- sword-1.5.11.orig/debian/control +++ sword-1.5.11/debian/control @@ -0,0 +1,65 @@ +Source: sword +Build-Depends: autotools-dev, + quilt, + patchutils (>= 0.2.31), + cdbs (>= 0.4.34), + debhelper (>= 5.0.7), + libz-dev, + pkg-config, + libcurl4-gnutls-dev, + libclucene-dev, + libicu-dev, + chrpath, + perl +Section: libs +Priority: optional +Maintainer: CrossWire Packages +Uploaders: Daniel Glassey , Dmitrijs Ledkovs , Jonathan Marsden +Standards-Version: 3.8.0 +Homepage: http://www.crosswire.org/sword/ + +Package: libsword7 +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Recommends: sword-frontend +Conflicts: libsword6 +Replaces: libsword1, libsword4, libsword4c2, libsword5, libsword5c2a, libsword6, libsword-runtime, libsword-config +Description: API/library for bible software + The SWORD Project is an open source, cross-platform (Linux, Windows, Solaris, + MacOSX etc.) API/library for Bible software with a constantly growing list + of front-ends (GUI, textmode, web-based, etc.) and a library of over 200 + text modules. + . + This package contains the core libraries for the project. + It also contains utilities for generating data modules. + . + Please read the README.Debian for more information on how to obtain other + modules for sword. + +Package: libsword-dev +Architecture: any +Section: libdevel +Depends: libsword7 (= ${binary:Version}), ${misc:Depends} +Provides: sword-dev +Description: Development files for libsword + The SWORD Project is an open source, cross-platform (Linux, Windows, Solaris, + MacOSX etc.) API/library for Bible software with a constantly growing list + of front-ends (GUI, textmode, web-based, etc.) and a library of over 200 + text modules. + . + This package contains the static libraries and headers for developing + applications that use the sword library. + +Package: diatheke +Architecture: any +Section: text +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: Command line bible browsing and search tool + The SWORD Project is an open source, cross-platform (Linux, Windows, Solaris, + MacOSX etc.) API/library for Bible software with a constantly growing list + of front-ends (GUI, textmode, web-based, etc.) and a library of over 200 + text modules. + . + This package contains a command line utility for sword, allowing bible browsing + and searching. This tool is used mostly only for library testing. Nicer + front-ends are Xiphos (Gtk), Bibletime (KDE) and others. --- sword-1.5.11.orig/debian/README.Debian +++ sword-1.5.11/debian/README.Debian @@ -0,0 +1,29 @@ +You can download extra modules from: + + http://www.crosswire.org/sword/modules/ + +then install modules in /usr/local/share/sword + +# cd /usr/local/share/sword +# unzip ~/SwordMod.zip + +That method of install is not supported. + +Alternatively, for use on a user by user basis install them to +~/.sword + +Another alternative is to use the new commandline installmgr application, +or use BibleTime's install functionality. + +To use installmgr - by default it will install to ~/.sword +the default remoteSrcName is crosswire: + $ installmgr -init + $ installmgr -r + $ installmgr -rl list available modules from remote source + $ installmgr -ri install module from remote source + +Also, feel free to join us on IRC at irc.freenode.net #sword + +:) +Daniel + --- sword-1.5.11.orig/debian/xml2gbs.1.pod +++ sword-1.5.11/debian/xml2gbs.1.pod @@ -0,0 +1,54 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +xml2gbs - OSIS/ThML General Book module creation tool + +=head1 SYNOPSIS + +B [OPTIONS] SOURCE [MODULENAME] + + +=head1 DESCRIPTION + +This is a tool to create SWORD general book modules from OSIS/ThML sourse. A +module name can be optionally specified. + +=head1 OPTIONS + +=over + +=item B<-l> + +Use long div names in the ThML files. + +=item B<-i> + +exports to IMP formal instead of creating a module. + +=item B<-fT|-fO> + +Set the importer to ThML or OSIS format respectively. By default it attempts to +autodetect. + +=back + +=head1 Authors + +This manual page was written by Dmitrijs Ledkovs for +Debian project but may be used by others. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/mod2imp.1.pod +++ sword-1.5.11/debian/mod2imp.1.pod @@ -0,0 +1,85 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +mod2imp, mod2osis, mod2vpl, mod2zmod - export SWORD modules + +=head1 SYNOPSIS + +B [modulename] + +B [modulename] + +B [modulename] [0 |1] + +B [modulename] [PATH] [blocktype [compressiontype [cipherkey]]] + +=head1 DESCRIPTION + +These utilities export SWORD modules into various formats. B exports a +module into SWORD imp (import) format. B exports a module into OSIS +format. B exports into verse per line format. B produces +compressed SWORD modules. + +=head1 OPTIONS + +=over + +=item B<[modulename]> + +Specify the modulename to export. + +=item B<[0 | 1]> + +Only applies to B. 1 - prepends verse reference to each line, 0 - +doesn't. + +=item B<[PATH]> + +Only applies to B. Path where to create compressed module. + +=item B<[blocktype [compressiontype [cipherkey]]]> + +Only applies to B. Valid blocktypes are (default 4): + +=over + +=item 2 - verses + +=item 3 - chapters + +=item 4 -books + +=back + +Compression types are (default 1): + +=over + +=item 1 - LZSS + +=item 2 - Zip + +=back + +=back + +=head1 Authors + +This manual page was written by Dmitrijs Ledkovs for +Debian project but may be used by others. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/libsword7.docs +++ sword-1.5.11/debian/libsword7.docs @@ -0,0 +1,2 @@ +doc/greektrans.txt +doc/translation-template.conf --- sword-1.5.11.orig/debian/libsword7.manpages +++ sword-1.5.11/debian/libsword7.manpages @@ -0,0 +1,13 @@ +imp2gbs.1 +imp2ld.1 +imp2vs.1 +installmgr.1 +mod2imp.1 +addld.1 +mkfastmod.1 +osis2mod.1 +tei2mod.1 +vpl2mod.1 +vs2osisref.1 +xml2gbs.1 + --- sword-1.5.11.orig/debian/libsword-dev.install +++ sword-1.5.11/debian/libsword-dev.install @@ -0,0 +1,4 @@ +usr/include +usr/lib/libsword.so +usr/lib/libsword.a +usr/lib/pkgconfig --- sword-1.5.11.orig/debian/installmgr.1.pod +++ sword-1.5.11/debian/installmgr.1.pod @@ -0,0 +1,106 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +installmgr - install, list, update and remove SWORD modules + +=head1 SYNOPSIS + +B -init + +B -l + +B -u [ModuleName] + +B -s + +B [-r | -rl | -rd] [RemoteSrcName] + +B -ri [RemoteSrcName] [ModuleName] + +B -ll [PATH] + +B -li [PATH] [ModuleName] + +=head1 DESCRIPTION + +A command line utility to manipulate SWORD modules. It can be used to install, +remove, list and update SWORD modules, from local and network locations. + +Please note modules will be installed into /usr/share/sword without using +APT. If you use this utility you will not be able to uninstall these modules +using apt-get, aptitude, synaptic and similar tools. + +=head1 OPTIONS + +=over + +=item B<-init> + +Creates basic user configuration file. This will overwrite existing one. + +=item B<-l> + +Lists currently installed SWORD modules. + +=item B<-u [ModuleName]> + +Uninstalls module. + +=item B<-s> + +Lists available remote sources + +=item B<[-r | -rl | -rd] [RemoteSrcName]> + +These are used to manipulate remote sources. + +=over + +=item -r + +Refreshes remote source. + +=item -rl + +Lists available modules from the remote source. + +=item -rd + +Lists new/updated modules from the remote source. + +=back + +=item B<-ri [RemoteSrcName] [ModuleName]> + +Install module from remote source. + +=item B<-ll [PATH]> + +List available modules at a specified local path. + +=item B<-li [PATH] [ModuleName]> + +Install module from local path. + +=back + +=head1 Authors + +This manual page was written by Dmitrijs Ledkovs for +Debian project but may be used by others. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/vpl2mod.1.pod +++ sword-1.5.11/debian/vpl2mod.1.pod @@ -0,0 +1,68 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +vpl2mod - tool to convert verse per line source to SWORD module + +=head1 SYNOPSIS + +B SOURCE PATH [0|1] [0|1] + + +=head1 DESCRIPTION + +This utility is used to create SWORD module from the verse per line formated +source. The resulting module will be saved in the path specified. + +=head1 OPTIONS + +=over + +=item B<[0|1] [0|1]> + +The first option indicates whether to prepend verse references or not. +The second option is to indicate whether module is NT only or not. + +=back + +=head1 NOTE + +With no verse references source file must contain exactly 31102 lines. This is +KJV verse count plus heading for the module, testament, book and chapter. An +example snippet follows: + + MODULE HEADER + OLD TESTAMENT HEADER + GENESIS HEADER + CHAPTER 1 HEADER + In the beginning... + +This example implies there must also be a chapter 2 header, Exodus header, New +Testament header, etc. If there is no text for the header, a black line must, at +least, hold place. + +With verse references, source file must simply contain any number of lines, that +begin with the verse reference for which it is an entry, e.g.: + + gen 1:0 CHPATER 1 HEADER + get 1:1 In the beginning... + +=head1 Authors + +This manual page was written by Dmitrijs Ledkovs for +Debian project but may be used by others. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/imp2gbs.1.pod +++ sword-1.5.11/debian/imp2gbs.1.pod @@ -0,0 +1,65 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +imp2gbs - general book module creation tool + +=head1 SYNOPSIS + +B [input file] [OPTIONS] + +=head1 DESCRIPTION + +A command line utility to convert imp (import) formatted general book into SWORD +module. + +=head1 OPTIONS + +=over + +=item B<-o [PATH]> + +Specify the output path, if different from the input file's. + +=item B<-a> + +Create augment module. Default is to create new module. + +=item B<-O> + +Overwrite entries of same key. Default is to append. + +=item B<-U> + +A key filter which converts toUpper. + +=item B<-g> + +A key filter which strips greek diacritics. + +=item B<-l [levels]> + +A key filter which uses Pseudo-Lexicon n-level generation using first character, +e.g. -l 2 "Abbey" -> "A/AB/Abbey". + +=back + +=head1 Authors + +This manual page was written by Dmitrijs Ledkovs for +Debian project but may be used by others. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/diatheke.install +++ sword-1.5.11/debian/diatheke.install @@ -0,0 +1,3 @@ +usr/bin/diatheke +../../utilities/diatheke/cgi/*.pl usr/share/doc/diatheke/examples +../../utilities/diatheke/cgi/index-public.html usr/share/doc/diatheke/examples --- sword-1.5.11.orig/debian/libsword7.links +++ sword-1.5.11/debian/libsword7.links @@ -0,0 +1,4 @@ +usr/share/man/man1/mod2imp.1.gz usr/share/man/man1/mod2imp.1.gz +usr/share/man/man1/mod2imp.1.gz usr/share/man/man1/mod2osis.1.gz +usr/share/man/man1/mod2imp.1.gz usr/share/man/man1/mod2vpl.1.gz +usr/share/man/man1/mod2imp.1.gz usr/share/man/man1/mod2zmod.1.gz --- sword-1.5.11.orig/debian/libsword7.install +++ sword-1.5.11/debian/libsword7.install @@ -0,0 +1,19 @@ +etc/sword.conf +usr/lib/libsword.so.7.0.0 +usr/lib/libsword.so.7 +usr/bin/addld +usr/bin/imp2ld +usr/bin/imp2gbs +usr/bin/imp2vs +usr/bin/installmgr +usr/bin/mkfastmod +usr/bin/mod2imp +usr/bin/mod2osis +usr/bin/mod2vpl +usr/bin/mod2zmod +usr/bin/osis2mod +usr/bin/tei2mod +usr/bin/vpl2mod +usr/bin/vs2osisref +usr/bin/xml2gbs +usr/share/sword --- sword-1.5.11.orig/debian/addld.1.pod +++ sword-1.5.11/debian/addld.1.pod @@ -0,0 +1,66 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +addld - Lexicon & Dictionary module creation tool for SWORD Project + +=head1 SYNOPSIS + +B -a FILE key [PATH] +B -d FILE key +B -l FILE target_key link_name +B -c FILE + + +=head1 DESCRIPTION + +A command line utility to create and manipule Lexicon & Dictionary SWORD +modules. It can be used to add, delete and link L&D keys within module. +It can also be used to create new L&D modules. + +=over + +=item B<-a FILE key [PATH]> + +The form is used to add a key to a L&D module. Optionaly path can be +used to the file with the entry. + +=item B<-d FILE key> + +This form is used to delete a key from a file. + +=item B<-l FILE target_key link_name> + +This form is used to link two keys in the module. + +=item B<-c FILE> + +This is used to create a new module + +=back + +=head1 OPTIONS + +To use 4-byte L&D instead of 2-byte, insert a 4 immediately after the '-'. + +To use zLD instead of 2-byte, insert a z immediately after the '-'. + +=head1 Authors + +This manual page was written by Dmitrijs Ledkovs for +Debian project but may be used by others. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/rules +++ sword-1.5.11/debian/rules @@ -0,0 +1,36 @@ +#!/usr/bin/make -f +include /usr/share/cdbs/1/rules/debhelper.mk +include /usr/share/cdbs/1/class/autotools.mk +include /usr/share/cdbs/1/rules/patchsys-quilt.mk + +DEB_DH_INSTALL_SOURCEDIR := debian/tmp +DEB_CONFIGURE_EXTRA_FLAGS := --with-zlib --with-clucene=/usr --with-icu +DEB_DH_MAKESHLIBS_ARGS_libsword7 := -V"libsword7 (>= 1.5.11)" +DEB_SHLIBDEPS_INCLUDE_libsword7 := debian/tmp/usr/lib +DEB_SHLIBDEPS_INCLUDE_diatheke := debian/libsword7/usr/lib +#DEB_OPT_FLAG=-g -O0 -Werror + +# The next two rules use chrpath to remove unwanted rpath info +# from the compiled binaries when they are built on amd64. + +build/libsword7:: + chrpath -d $(CURDIR)/lib/.libs/libsword.so* + chrpath -d $(CURDIR)/utilities/.libs/* + pod2man --release=$(VERSION) --center "" -n IMP2GBS debian/imp2gbs.1.pod > imp2gbs.1 + pod2man --release=$(VERSION) --center "" -n IMP2LD debian/imp2ld.1.pod > imp2ld.1 + pod2man --release=$(VERSION) --center "" -n IMP2VS debian/imp2vs.1.pod > imp2vs.1 + pod2man --release=$(VERSION) --center "" -n INSTALLMGR debian/installmgr.1.pod > installmgr.1 + pod2man --release=$(VERSION) --center "" -n MOD2IMP debian/mod2imp.1.pod > mod2imp.1 + pod2man --release=$(VERSION) --center "" -n ADDLD debian/addld.1.pod > addld.1 + pod2man --release=$(VERSION) --center "" -n MKFASTMOD debian/mkfastmod.1.pod > mkfastmod.1 + pod2man --release=$(VERSION) --center "" -n OSIS2MOD debian/osis2mod.1.pod > osis2mod.1 + pod2man --release=$(VERSION) --center "" -n TEI2MOD debian/tei2mod.1.pod > tei2mod.1 + pod2man --release=$(VERSION) --center "" -n VPL2MOD debian/vpl2mod.1.pod > vpl2mod.1 + pod2man --release=$(VERSION) --center "" -n VS2OSISREF debian/vs2osisref.1.pod > vs2osisref.1 + pod2man --release=$(VERSION) --center "" -n XML2GBS debian/xml2gbs.1.pod > xml2gbs.1 + +build/diatheke:: + chrpath -d $(CURDIR)/utilities/diatheke/.libs/diatheke + +clean/:: + rm -f *.1 --- sword-1.5.11.orig/debian/watch +++ sword-1.5.11/debian/watch @@ -0,0 +1,3 @@ +version=3 +http://www.crosswire.org/ftpmirror/pub/sword/source/v([\d.]+)/sword-([\d\.]+)(.*)\.tar\.gz + --- sword-1.5.11.orig/debian/imp2ld.1.pod +++ sword-1.5.11/debian/imp2ld.1.pod @@ -0,0 +1,49 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +imp2ld - Lexicon, Dictionary, Daily Devotional and Glossary module creation tool + +=head1 SYNOPSIS + +B [modulename] [4 | 2 | z] + +=head1 DESCRIPTION + +A command line utility to convert imp formatted file into lexicon, dictionary, +daily devotional or glossary SWORD module. + +=head1 OPTIONS + +=over + +=item B<[modulename]> + +Specify the output modulename. + +=item B<[4 | 2 | z> + +Specify output module driver. Default is 4. + + +=back + +=head1 Authors + +This manual page was written by Dmitrijs Ledkovs for +Debian project but may be used by others. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/diatheke.manpages +++ sword-1.5.11/debian/diatheke.manpages @@ -0,0 +1 @@ +debian/diatheke.1 --- sword-1.5.11.orig/debian/copyright +++ sword-1.5.11/debian/copyright @@ -0,0 +1,15 @@ +Format-Specification: http://wiki.debian.org/Proposals/CopyrightFormat?action=recall&rev=440 +Upstream-Name: SWORD API +Upstream-Maintainer: Members of the SWORD Project team +Upstream-Source: http://www.crosswire.org/sword/software/swordapi.jsp + +Files: * +Copyright: Copyright 1996-2009 CrossWire Bible Society +License: GPL-2+ + On Debian systems, the complete text of the GNU General Public + License, version 2, can be found in /usr/share/common-licenses/GPL-2. + +Files: debian/* +Copyright: Copyright 2009 CrossWire Packages +Copyright: Copyright -2008 Daniel Glassly +License: Unknown --- sword-1.5.11.orig/debian/compat +++ sword-1.5.11/debian/compat @@ -0,0 +1 @@ +5 --- sword-1.5.11.orig/debian/mkfastmod.1.pod +++ sword-1.5.11/debian/mkfastmod.1.pod @@ -0,0 +1,28 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +mkfastmod - creates a search index for a module + +=head1 SYNOPSIS + +B module + +=head1 DESCRIPTION + +A command line utility which creates a search index for a module. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/vs2osisref.1.pod +++ sword-1.5.11/debian/vs2osisref.1.pod @@ -0,0 +1,33 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +vs2osisref - a tool to convert verse references from English to OSIS + +=head1 SYNOPSIS + +vs2osisref VERSEREF [verse_context] + +=head1 DESCRIPTION + +Returns the osisRef of a given (text form) verse reference. + +=head1 Authors + +This manual page was written by Dmitrijs Ledkovs for +Debian project but may be used by others. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/changelog +++ sword-1.5.11/debian/changelog @@ -0,0 +1,753 @@ +sword (1.5.11-1) experimental; urgency=low + + [Jonathan Marsden] + * New upstream release + * debian/rules: + - Switch to using more normal CDBS/autotools not tarball in tarball. + - Build against libicu for better i18n support. + - Use chrpath on installed binaries to get rid of lintian warnings. + - Set DEB_DH_MAKESHLIBS_ARGS to (>= 1.5.11) not (>=1.5.11-1). + - Add pod2man command to generate tei2mod man page. + - Use -n option on pod2man commands to fix command names in man pages. + * Bump SONAME to 7. + - Rename debian/libsword6.* appropriately. + - Change 6 to 7 in several scripts including debian/rules + and debian/control + * debian/patches: + - Remove most patches as being unnecessary now. + - Simplify debian/patches/02_libver.diff to only edit the version-info. + * debian/control: + - Bump Standards-Version to 3.8.0. + - Update diatheke one-line description (cli tool not CGI script). + - Removed recommends of a web server for diatheke. + - Edit description of diatheke removing references to web/CGI. + - Add ${misc:Depends} to Depends of binary packages. + - Add Homepage tag + - Update Conflicts: to libsword6. + - Update Replaces: to include libsword6. + * debian/*: + - Move CGI scripts to install as examples, for security reasons. + - Add debian/diatheke.README.Debian explaining move of CGI scripts. + - Minimize unnecessary debian/*.dirs files and entries in them. + - Remove unnecessary debian/libsword7.shlibs file. + * debian/diatheke.1: + - Escape all unescaped dashes. + - Add trailing newline. + * debian/diatheke.manpages: + - Create file, add debian/diatheke.1 so this man page is included in + the diatheke binary package. + * debian/libsword7.install: + - Add missing usr/bin/tei2mod entry so the tei2mod command is installed. + * debian/libsword7.manpages: + - Add an entry for tei2mod.1 man page. + * debian/tei2mod.1.pod: + - Add the tei2mod man page source. + + [Dmitrijs Ledkovs] + * debian/*.pod + - Added manpages for all utilities. + * debian/rules + - Added rules to generate manpages from POD. + * debian/libsword7.manpages + - Created manpages list. + * debian/control + - Set maintainer to CrossWire Packaging team + - Set uploaders: Daniel Glassey, Dmitrijs Ledkovs, Jonathan Marsden + - Extended descriptions of the packages + * debian/changelog + - updated formatting, sorted by developer + * debian/copyrights + - updated to proposed copyright format + * debian/patches + - added patch descriptions + + -- Jonathan Marsden Sat, 04 Apr 2009 23:09:16 -0700 + +sword (1.5.9-8.1ubuntu1) intrepid; urgency=low + + * Fakesync with Debian unstable (LP: #234580) + * Modify Maintainer value to match the DebianMaintainerField + specification. + + -- Emilio Pozuelo Monfort Wed, 28 May 2008 15:38:08 +0200 + +sword (1.5.9-8.1) unstable; urgency=medium + + * Non-maintainer upload. + * Amend 08_gcc_43.diff to fix GCC 4.3 FTBFS (Closes: #474824) + * debian/control: + - Build-Depend on cdbs >= 0.4.27 instead of 0.4.27-1. + - Bump Standards-Version to 3.7.3. + - Use ${binary:Version} instead of ${Source-Version}. + + -- Chris Lamb Sat, 12 Apr 2008 00:00:29 +0100 + +sword (1.5.9-8ubuntu1) hardy; urgency=low + + * Fakesync from Debian unstable. + * Fixes CVE-2008-0932. (LP: #195696) + + -- William Grant Sun, 16 Mar 2008 20:59:00 +1100 + +sword (1.5.9-8) unstable; urgency=high + + * diatheke failed to use shell_escape for the range parameter + properly, Closes: #466449 + + -- Daniel Glassey Mon, 18 Feb 2008 22:57:25 +0000 + +sword (1.5.9-7.1) unstable; urgency=medium + + [ Luk Claes ] + * Non-maintainer upload. + * Don't ship the libsword.la file anymore (Closes: #444562). + * Don't rely on libclucene.la anymore (Closes: #445776). + + -- root Sat, 02 Feb 2008 15:46:07 +0000 + +sword (1.5.9-7) unstable; urgency=low + + * libsword-dev should not depend on libclucene-dev + or libc6-dev, libz-dev, libcurl4-gnutls-dev + * patch 09_pcfile.diff don't link apps to all these libs + * update patch 02_libver.diff link lib to clucene + + -- Daniel Glassey Fri, 31 Aug 2007 16:33:10 +0100 + +sword (1.5.9-6ubuntu1) gutsy; urgency=low + + * Fakesync from Debian unstable + * Modify Maintainer value to match Debian-Maintainer-Field Spec + + -- Lionel Porcheron Sun, 08 Jul 2007 22:51:24 +0200 + +sword (1.5.9-6) unstable; urgency=low + + * debian/control: diatheke should recommend apache2 now + * unmet Recommends on libapache-mod-perl | apache-perl (Closes: + #429565) + + -- Daniel Glassey Fri, 22 Jun 2007 10:45:24 +0100 + +sword (1.5.9-5ubuntu2) gutsy; urgency=low + + * Rebuild for the libcurl transition mess. + + -- Steve Kowalik Thu, 5 Jul 2007 14:11:58 +1000 + +sword (1.5.9-5ubuntu1) gutsy; urgency=low + + * Merge from Debian unstable, remaining changes: + - Modify Maintainer value to match Debian-Maintainer-Fied Spec + + -- Raphael Pinson Wed, 6 Jun 2007 15:53:55 +0200 + +sword (1.5.9-5) unstable; urgency=low + + * debian/control change libsword-dev dependency to + libcurl4-gnutls-dev, Closes: #423936 + * include patch to build with gcc 4.3, Closes: #417717 + + -- Daniel Glassey Sat, 19 May 2007 16:22:41 -0600 + +sword (1.5.9-4ubuntu1) gutsy; urgency=low + + * Merge from debian unstable, remaining changes: + * Fakesync + * Modify Maintainer value to match Debian-Maintainer-Field Spec + + -- Sarah Hobbs Sat, 19 May 2007 14:23:34 +1000 + +sword (1.5.9-4) unstable; urgency=low + + * debian/control curl transition, change build dep to + libcurl4-gnutls-dev, Closes: #423936, #423958 + * enable 06_warnings and 07_warn_tools patches + + -- Daniel Glassey Tue, 15 May 2007 07:56:16 -0600 + +sword (1.5.9-3build1) feisty; urgency=low + + * Fakesync due to mismatched orig.tar.gz (no Ubuntu changes). + + -- Michael Bienia Fri, 12 Jan 2007 14:05:22 +0100 + +sword (1.5.9-3) unstable; urgency=high + + * patch 06_warnings.diff - modifications to fix some compiler warnings + (not enabled in this version) + * patch 07_warnings_tools.diff - modifications to fix some compiler warnings + (not enabled in this version) + * debian/control: diatheke to recommend not depend on webserver as + the script can be used on its own, Closes: #358535 + * patch 04_ziplock.diff to fix error when uncompressing locked modules + IMPORTANT - prevents a crash with bibletime and locked modules + so urgency high + * patch 05_getline.diff prevents potential use of uninitialised var + * rename diffs to xx_name.diff + + -- Daniel Glassey Fri, 24 Nov 2006 15:14:05 +0000 + +sword (1.5.9-2) unstable; urgency=low + + * Use CLUCENE_LIBS not LUCENE_LIBS in sword.pc.in + so that frontends will just link to clucene + + -- Daniel Glassey Thu, 23 Nov 2006 11:37:17 +0000 + +sword (1.5.9-1) unstable; urgency=low + + * New upstream version + * debian/control: + changes to API so new package libsword6, replaces libsword5c2a + don't depend on libicu36-dev + (would have depended on libicu36-dev instead of icu34) + * debian/rules: + shlibs for libsword6 + new upstream tarball + use --with-clucene=/usr + don't build with icu + * remove debian/control.in + * debian/libsword6.dirs: rename + * debian/libsword6.docs: rename and refer to correct dir + * debian/libsword6.install: rename and use new .so name + * debian/libsword6.shlibs: rename and use new .so name + * debian/patches: don't need utilities patch, update lib version patch + * debian/diatheke*: refer to 1.5.9 directory + + -- Daniel Glassey Mon, 25 Sep 2006 19:53:37 +0100 + +sword (1.5.9-0ubuntu3) edgy; urgency=low + + * Update debian/libsword6.shlibs with Ubuntu version of lib + + -- Raphaël Pinson Thu, 28 Sep 2006 11:04:42 +0200 + +sword (1.5.9-0ubuntu2) edgy; urgency=low + + * Shlibs created with libsword6 >= 1.5.9-0ubuntu1 in debian/rules + + -- Raphaël Pinson Tue, 26 Sep 2006 08:18:34 +0200 + +sword (1.5.9-0ubuntu1) edgy; urgency=low + + [ Daniel Glassey ] + * New upstream version + * debian/control: + changes to API so new package libsword6, replaces libsword5c2a + don't depend on libicu36-dev + (would have depended on libicu36-dev instead of icu34) + * debian/rules: + shlibs for libsword6 + new upstream tarball + use --with-clucene=/usr + don't build with icu + * remove debian/control.in + * debian/libsword6.dirs: rename + * debian/libsword6.docs: rename and refer to correct dir + * debian/libsword6.install: rename and use new .so name + * debian/libsword6.shlibs: rename and use new .so name + * debian/patches: don't need utilities patch, update lib version patch + * debian/diatheke*: refer to 1.5.9 directory + + [ Raphaël Pinson ] + * Bump debhelper version to 5 + + -- Raphaël Pinson Tue, 26 Sep 2006 07:30:20 +0200 + +sword (1.5.8-9) unstable; urgency=low + + * build using clucene, build-deps on libclucene-dev + * not released, but applies to 1.5.9 + + -- Daniel Glassey Wed, 14 Dec 2005 19:46:26 +0000 + +sword (1.5.8-8) unstable; urgency=low + + * fix build depends wrt cdbs autogenerated version + * debian/rules: fix shlibsdeps + + -- Daniel Glassey Sat, 10 Dec 2005 20:25:24 +0000 + +sword (1.5.8-7) unstable; urgency=medium + + * ackknowledge NMU, thanks, Closes: #339269 + * don't autogenerate debian/control using cdbs + * use gnutls version of curl since sword is GPLd + + -- Daniel Glassey Thu, 8 Dec 2005 10:42:17 +0000 + +sword (1.5.8-6.1) unstable; urgency=medium + + * Non-maintainer upload. + * Medium-urgency upload for RC bugfix. + * Rename libsword5 to libsword5c2a for the C++ mt allocator ABI transition, + and conflict/replace libsword5 accordingly (closes: #339269). + + -- Steve Langasek Mon, 5 Dec 2005 00:10:19 -0800 + +sword (1.5.8-6) unstable; urgency=low + + * build dep on a version of libcurl3-openssl-dev that has the + correct depends, Closes: #334667 + + -- Daniel Glassey Wed, 19 Oct 2005 08:52:38 +0100 + +sword (1.5.8-5) unstable; urgency=low + + * rebuild against curl and openssl + * build depend on libcurl3-openssl-dev instead of libcurl3-dev + * libsword-dev depends on libcurl3-openssl-dev + + -- Daniel Glassey Thu, 13 Oct 2005 11:44:39 +0100 + +sword (1.5.8-4) unstable; urgency=low + + * debian/rules: shlibs should be for libsword5 >= 1.5.8-3 + + -- Daniel Glassey Fri, 9 Sep 2005 12:00:29 +0100 + +sword (1.5.8-3) unstable; urgency=low + + * debian/libsword5.shlibs: Fix shlibs problem for bug #323116 + * updated FSF address in copyright + * remove libsword5.conffiles to stop duplication + * change the lib soname to 5 rather than 1.5.8 + + -- Daniel Glassey Wed, 7 Sep 2005 15:44:47 +0100 + +sword (1.5.8-2) unstable; urgency=low + + * Don't install libsword-1.5.8.so to both packages + * html docs aren't in sword any more so remove libsword-dev.doc-base + + -- Daniel Glassey Thu, 11 Aug 2005 16:07:03 +0100 + +sword (1.5.8-1) unstable; urgency=low + + * New upstream release + so new package libsword5, no need for libsword4c2 now + * Thanks for the gcc4 fix, acknowledge NMU (Closes: #288586) + * Change to using cdbs and quilt to manage patches + * include imp2gbs and xml2gbs utilities + + -- Daniel Glassey Wed, 10 Aug 2005 15:44:34 +0100 + +sword (1.5.7-7.1) unstable; urgency=low + + * Non-Maintainer Upload + * C++ transition: libsword4 -> libsword4c2 + * Fix gcc4 compile error: Use intptr_t as type for pointers, not 'int' + (Closes: #288586) + * Debhelper compat level 4, to fix calls to ldconfig properly, and drop a + lot of manual stuff + * Run dh_makeshlibs *before* dh_installdeb + * Fix broken dh_shlibs invocation + + -- Jeroen van Wolffelaar Sat, 6 Aug 2005 19:42:38 +0200 + +sword (1.5.7-7) unstable; urgency=high + + * Patch from security team, Closes: #291433 + * Added shell_escape() function to fix arbitrary command execution + [apps/console/diatheke/cgi/diatheke.pl, CAN-2005-0015] + * Improvements by Ulf Härnhammar + + -- Daniel Glassey Mon, 17 Jan 2005 16:24:37 +0000 + +sword (1.5.7-6) unstable; urgency=low + + * libsword-dev should depend on libcurl3-dev + + -- Daniel Glassey Mon, 13 Dec 2004 23:03:20 +0000 + +sword (1.5.7-5) unstable; urgency=low + + * Change from libcurl2-dev to libcurl3-dev, Closes: #279460 + * Move the pkgconfig file to the dev package, Closes: #281585 + + -- Daniel Glassey Thu, 9 Dec 2004 14:26:45 +0000 + +sword (1.5.7-4) unstable; urgency=low + + * Use PassiveFtp for installmgr by default + This avoids problems with the BibleTime installer, Closes: #235601 + + -- Daniel Glassey Fri, 16 Jul 2004 16:51:35 +0100 + +sword (1.5.7-3) unstable; urgency=low + + * src/utilfuns/utilstr.cpp - toupperstr *buf++ fix + caused segfaults when compiled with -O2 + * fix to build with gcc 3.4 + include/multimapwdef.h, Closes: #258768 + * build the diatheke package again, it is still there just in a + different place, Closes: #229444 + * fix documentation about modules, + README.Debian, Closes: #249020 + + -- Daniel Glassey Wed, 14 Jul 2004 16:54:27 +0100 + +sword (1.5.7-2) unstable; urgency=low + + * Fix problem building with current libcurl2-dev - TRUE has + been removed from the curl header, VERBOSE just needs to + be 1 now, Closes: #227860 + + -- Daniel Glassey Thu, 15 Jan 2004 15:50:07 +0000 + +sword (1.5.7-1) unstable; urgency=low + + * New upstream version + * set lib version to 4 + * remove diatheke as it has been removed from upstream source, + hopefully it will be released separately soon + * improve the copyright file because of post to debian-devel + + -- Daniel Glassey Wed, 7 Jan 2004 15:16:30 +0000 + +sword (1.5.6-9) unstable; urgency=medium + + * Build depend on libcurl2-dev + + -- Daniel Glassey Thu, 20 Nov 2003 10:20:11 +0000 + +sword (1.5.6-8) unstable; urgency=low + + * Remove the recommends of libsword-runtime from libsword-dev, Closes: + #220411 + * That'd better be the last of the control file mistakes :/ + + -- Daniel Glassey Wed, 12 Nov 2003 14:39:30 +0000 + +sword (1.5.6-7) unstable; urgency=low + + * Also Replaces libsword-runtime and libsword-config, Closes #220408 + + -- Daniel Glassey Wed, 12 Nov 2003 14:00:34 +0000 + +sword (1.5.6-6) unstable; urgency=low + + * Rerun libtool/autoconf/automake, Closes: #220250 + + -- Daniel Glassey Tue, 11 Nov 2003 19:20:16 +0000 + +sword (1.5.6-5) unstable; urgency=low + + * libsword3 replaces libsword2c103, Closes: #219463 + * libsword3 replaces libsword1, Closes: #219463 + * no libsword-runtime package now so description is irrelevant, Closes: #209977 + + -- Daniel Glassey Fri, 7 Nov 2003 13:53:46 +0000 + +sword (1.5.6-4) unstable; urgency=low + + * The 'ok, forget about the config package' release + * now at policy 3.6.1.0 + * add a build-dep for pkg-config + * ready to upload to unstable + + -- Daniel Glassey Wed, 5 Nov 2003 17:04:44 +0000 + +sword (1.5.6-3) experimental; urgency=low + + * -runtime package is unnecessary so merge it into lib + + -- Daniel Glassey Wed, 3 Sep 2003 20:49:58 +0100 + +sword (1.5.6-2) experimental; urgency=low + + * Brown paper bug - get shlibs right + + -- Daniel Glassey Fri, 29 Aug 2003 11:25:55 +0100 + +sword (1.5.6-1) experimental; urgency=low + + * Release is done now + * Upload to experimental for now til gs and bt are ready + * don't need the c102 suffix now + * don't build with icu til we get 2.6 packaged and into experimental + + -- Daniel Glassey Thu, 28 Aug 2003 17:38:40 +0100 + +sword (1.5.5.99-2) unstable; urgency=low + + * Another prerelease build + * split config files out into separate package so we can have different + sword libs installed at the same time later on + + -- Daniel Glassey Wed, 16 Jul 2003 14:48:22 +0100 + +sword (1.5.5.99-1) unstable; urgency=low + + * Build a pre-release from a make dist from cvs + * change lib version for imminent 1.5.6 + * depend on icu 2.6 to test that + * api docs have been moved out into separate source + + -- Daniel Glassey Thu, 10 Jul 2003 12:45:18 +0100 + +sword (1.5.5-4) unstable; urgency=low + + * debian/control remove extra blank line that stops building on woody + + -- Daniel Glassey Thu, 1 May 2003 09:59:14 +0100 + +sword (1.5.5-3) unstable; urgency=low + + * libsword-dev now depends on icu stuff so apps that build with it don't + have to + * conflict with libsword1 since both include config files (may split these + out into separate package for 1.5.6), Closes #189647 + + -- Daniel Glassey Sat, 19 Apr 2003 16:01:05 +0100 + +sword (1.5.5-2) unstable; urgency=low + + * Close the new upstream bug, Closes: #175322 + * uses autotools-dev to get the uptodate config.guess and + config.sub, hopefully will sort out mips problem, Closes: #187703 + * Utilities are now really included - bug 157115 tagged for woody + * debian/control - change section of libsword-dev to libdevel + * debian/rules - + remove alpha compiler flags since it is ok with gcc3.2, Closes: #142703 + use confflags like autotools-dev says + copy the config.guess and .sub from autotools-dev + + -- Daniel Glassey Sat, 5 Apr 2003 12:53:06 +0100 + +sword (1.5.5-1) unstable; urgency=low + + * New upstream release + * Rename library package to libsword2c102 since it is a new + libver from 1.5.3 and it is part of the gcc3.2 transition + * build with icu support now that icu has made the transition + so build-depend on libicu21-dev and icu + * build depend on debhelper >= 4.0.0 + + -- Daniel Glassey Tue, 26 Mar 2003 18:42:28 +0000 + +sword (1.5.4+cvs20021008-1) unstable; urgency=low + + * try and build a package from cvs + + -- Daniel Glassey Tue, 8 Oct 2002 19:08:46 +0100 + +sword (1.5.4-1) unstable; urgency=low + + * new upstream version + * bump shlibs version since old version was released with woody + * package now libsword2 instead of libsword1 + + -- Daniel Glassey Sat, 28 Sep 2002 13:31:47 +0100 + +sword (1.5.3-3) unstable; urgency=high + + * problem integrating hppa patch messed up rules, trying again + * updating README.Debian to mention apt-gettable archive on + crosswire + + -- Daniel Glassey Sun, 14 Apr 2002 15:19:14 +0100 + +sword (1.5.3-2) unstable; urgency=low + + * make sure will build on gcc-3.0, sorry, Closes: #142617 + * alpha won't compile with -g flag so compiling without it + see bug 142703 + + -- Daniel Glassey Sat, 13 Apr 2002 13:04:28 +0100 + +sword (1.5.3-1) unstable; urgency=high + + * New upstream release + + -- Daniel Glassey Tue, 2 Apr 2002 21:38:58 +0100 + +sword (1.5.2-10) unstable; urgency=low + + * -9 failed on hppa, using namespace std needed in testblocks.cpp + fix tested on sarti + + -- Daniel Glassey Sat, 9 Feb 2002 18:20:40 +0000 + +sword (1.5.2-9) unstable; urgency=low + + * make the diatheke configure executable in debian/rules + Closes: #132863 + * make diatheke description useful debian/control + * bump shlibs version to 1.5.2-9 + * debian/rules dh_shlibdeps changed to -ldebian/tmp/usr/lib + * compzip.cpp #include string.h and stdlib.h added for gcc 3.0 + * README.Debian mention #sword irc channel + + -- Daniel Glassey Fri, 8 Feb 2002 08:59:29 +0000 + +sword (1.5.2-8) unstable; urgency=low + + * rwphtml change greek_str to signed char + * migrate to automake 1.5 + * move utilities to separate package libsword-runtime, Closes: #130909 + * new package containing diatheke from apps/console/diatheke, Closes: #130908 + * Bump standards version to 3.5.6.0 + + -- Daniel Glassey Thu, 24 Jan 2002 20:01:16 +0000 + +sword (1.5.2-7) unstable; urgency=low + + * Rename roman.cpp to romanc.cpp, Closes #130038 + * Update README.Debian to mention apt-gettable module archive + deb http://www.crosswire.org/~glasseyes/debian unstable main + + -- Daniel Glassey Wed, 23 Jan 2002 18:53:18 +0000 + +sword (1.5.2-6) unstable; urgency=low + + * remove -Werror, autobuilders not happy (fair enough, I can check + through the build logs for warnings myself :) ) + * rawstr, rawstr4 more signed char in findoffset, Closes: #130038 + * c++ comments so roman.c -> roman.cpp, Closes: #129886 + + -- Daniel Glassey Mon, 21 Jan 2002 20:19:31 +0000 + +sword (1.5.2-5) unstable; urgency=low + + * char signedness fixes + (in response to debian-devel-announce from Gerhard Tonn + swkey: persist to signed char + swmodule: createModule to signed char + createSearchFramework to signed char + versekey: book,testament to signed char + swmgr: setCipherKey to signed char + filemgr: trunc to signed char + rawtext: createSearchFramework to signed char + rawstr: findoffset to signed char + rawstr4: findoffset to signed char + in gettext make localsize to unsigned int + * use -Werror in Makefile.cfg to catch any more + * anything else is either already fixed or will be fixed in the + imminent version 1.5.3 + + -- Daniel Glassey Thu, 17 Jan 2002 23:55:08 +0000 + +sword (1.5.2-4) unstable; urgency=low + + * Change maintainer to wdg@debian.org + * change shlibs to libsword1 >= 1.5.2-4 (gnomesword bug 123418) + by dh_makeshlibs -V 'libsword1 (>= 1.5.2-4)' in debian/rules + * remove reference to cheatah in package description + + -- Daniel Glassey Tue, 11 Dec 2001 22:36:44 +0000 + +sword (1.5.2-3) unstable; urgency=low + + * oops, include gifs in html documentation as well + * chmod 755 before executing configure, closes #122658 + * remove autoconf from build-depends + + -- Daniel Glassey Wed, 5 Dec 2001 00:25:07 +0000 + +sword (1.5.2-2) unstable; urgency=low + + * Backport endian solution from CVS, Closes: #103732 + * include some module utilities in the dev package + * use the latest config.* from /usr/share/misc + + -- Daniel Glassey Mon, 3 Dec 2001 19:11:08 +0000 + +sword (1.5.2-1.1) unstable; urgency=low + + * NMU to satisfy build-dependencies. + * Fix gcc 3.0 compile failures. Closes: #108707. + + -- LaMont Jones Tue, 14 Aug 2001 09:25:42 -0600 + +sword (1.5.2-1) unstable; urgency=low + + * New upstream release + * final 1.5.2 release + + -- Daniel Glassey Mon, 2 Jul 2001 22:53:50 +0000 + +sword (1.5.1.99-1) unstable; urgency=low + + * New upstream release + * prerelease of 1.5.2 + * change maintainer address to wdg@debian.org + * add libsword-dev.manpages + + -- Daniel Glassey Mon, 25 Jun 2001 18:32:04 +0000 + +sword (1.5.1a-4) unstable; urgency=low + + * Merged with Ivan Moore's latest package (1.5.1a-2 in Debian) + * Now recommends frontend and doesn't depend on modules + + -- Daniel Glassey Mon, 22 Jan 2001 22:22:10 +0000 + +sword (1.5.1a-3) unstable; urgency=low + + * use autoconf to determine platform + * add zlib to build-depends + * up standards version to 3.2.1 + * module creation progs added to dev + + -- Daniel Glassey Mon, 15 Jan 2001 18:53:14 +0000 + +sword (1.5.1a-2) unstable; urgency=low + + * recommend text, suggest dict and comm. install locales. + + -- Daniel Glassey Mon, 4 Dec 2000 21:32:33 +0000 + +sword (1.5.1a-1) unstable; urgency=low + + * New upstream release + + -- Daniel Glassey Thu, 23 Nov 2000 20:06:03 +0000 + +sword (1.5.0-1) unstable; urgency=low + + * New upstream release + + -- Daniel Glassey Mon, 28 Aug 2000 21:34:49 +0100 + +sword (1.4.6-2) unstable; urgency=low + + * Change of maintainer + + -- Daniel Glassey Mon, 28 Aug 2000 19:14:22 +0100 + +sword (1.4.6-1) unstable; urgency=low + + * New upstream version + + -- Ivan E. Moore II Thu, 20 Jan 2000 19:30:16 -0700 + +sword (1.4.4-4) unstable; urgency=low + + * Removing mods.conf file + + -- Ivan E. Moore II Fri, 01 Oct 1999 07:30:16 -0400 + +sword (1.4.4-3) unstable; urgency=low + + * Fixing minor pathing bug with mods.conf files + + -- Ivan E. Moore II Fri, 01 Oct 1999 04:45:16 -0400 + +sword (1.4.4-2) unstable; urgency=low + + * Fixing alot of things. + + -- Ivan E. Moore II Fri, 01 Oct 1999 01:30:16 -0400 + +sword (1.4.4-1) unstable; urgency=low + + * Initial Release. + + -- Ivan E. Moore II Thu, 30 Sep 1999 08:30:16 -0400 + +Local variables: +mode: debian-changelog +End: + --- sword-1.5.11.orig/debian/diatheke.1 +++ sword-1.5.11/debian/diatheke.1 @@ -0,0 +1,201 @@ +.\" diatheke man page +.\" (C)2006 Eeli Kaikkonen +.\" You may do whatever you wish with this file. +.\" Version 0.8 +.TH DIATHEKE 1 "2009-02-01" "diatheke 4.2.1" "Diatheke man page" +.SH NAME +diatheke \- a command line Bible reader +.SH SYNOPSIS +.\" for synopsis format see man man +.B diatheke +.B \-b +.I module_name +[\fB\-o \fIoption_filters\fR] +[\fB\-m \fImaximum_verses\fR] +[\fB\-f \fIoutput_format\fR] +[\fB\-e \fIoutput_encoding\fR] +[\fB\-t \fIscript\fR] +[\fB\-v \fIvariant_number\fR] +[\fB\-l \fIlocale\fR] +.B \-k +.I query_key + +.B diatheke +.B \-b +.I module_name +\fB\-s regex\fR|\fBmultiword\fR|\fBphrase\fR +[\fB\-r \fIsearch_range\fR] +[\fB\-l \fIlocale\fR] +.B \-k +.I search_string + +.B diatheke +.B \-b system +.B \-k modulelist\fR|\fBmodulelistnames\fR|\fBlocalelist + +.B diatheke +.B \-b info +.B \-k +.I module_name +.SH DESCRIPTION +.I diatheke +prints Bible verses or other text from the modules which the Sword library uses. +.SH OPTIONS +.TP +.B \-b +Module name. May be "system" or "info" (see QUERY KEYS) or one of the names obtained by +using "diatheke \-b system \-k modulelist". +.TP +.B \-s +Search type. One of +regex +(regular expression, see regex(7)), +multiword +(like "word [AND word]..."), +phrase +(exact text). +.TP +.B \-r +Search range. A valid Bible key range value (see \-k). For example: Matt-John, Rom, +gen-psalms, 1Thess 1:5-2:6. +.TP +.B \-o +Module option filters. A combination of "fmhcvalsrbx". See MODULE OPTIONS. +.TP +.B \-m +Maximum number of verses returned. Any integer value. +.TP +.B \-f +Output format. One of GBF, ThML, RTF, HTML, OSIS, CGI, plain (default). +This currently works only if there is a Sword library filter from the original format to +the specified output format. HTML and CGI are for generating text for a webpage. +.TP +.B \-e +Output character encoding. One of Latin1, UTF16, HTML, RTF, UTF8 (default). +This currently works only for module contents, not for system key contents +or key texts. +.TP +.B \-t +.\" TODO +Script. (This seems to be broken in version 4.2.1, +it should allow e.g. Greek->Latin1 character +transliteration with "\-t Latin".) +.TP +.B \-v +Variant. The text may contain variant readings. One of \-1 (all), 0, 1. +.TP +.B \-l +Locale. Sword may have different locales installed. Default is en. Localization +affects input and output keys. +.TP +.B \-k +Query key. It must be the last argument because all following +arguments are added to the key. See QUERY KEYS for different kinds of keys. +.SH MODULE OPTIONS +By default the optional features of modules are not shown in the returned +text. These options make them visible if the module supports them. +.TP +.B n +Strong's numbers. These numbers refer to the Strong's dictionaries of the New and +Old Testaments. Some Bible texts attach these numbers to words. +.TP +.B f +Footnotes. +.TP +.B m +Morphology of the Greek/Hebrew words. Morphology is shown as a code which refers +to an entry in some dictionary-type module. +.TP +.B h +Section headings. +.TP +.B c +Hebrew cantillation. +.TP +.B v +Hebrew vowels. +.TP +.B a +Greek accents. +.TP +.B l +Lemmas (the base forms of the words). +.TP +.B s +Scripture cross-references. +.TP +.B r +Arabic shaping. +.TP +.B b +Bi-directional reordering. +.TP +.B x +Red Words of Christ. +.SH QUERY KEYS +.TP +.B Bible texts and Commentaries +use verse keys. Examples: john 1:1, j1:1 jh1 (the first chapter of John), jh +(the whole book of Gospel of John), joh 1:1-3 ( a verse range), joh 1:0 +(one verse backwards from +1:1, which is the last verse of the previous book or possibly an introduction to John), +joh 1:100 (which is 100 verses +forward from the first verse of John 1:1), 1234 (which is the 1234th verse from +the beginning of the Bible). +.TP +.B Lexicons and Dictionaries +use word keys. Any word can be used and similar or next entry alphabetically is returned. +Some dictionaries like Strong's use numbered entries. +.TP +.B system +is not a module but when used with \-b allows one of these keys: +modulelist +(list of the available modules with short descriptions), +modulelistnames +(list of the names of the available modules), +localelist +(list of the available Sword locales). +.TP +.B info +is not a module but when used with \-b allows a module name as a key +and gives some information about that module. +.SH EXAMPLES +.TP +diatheke \-b KJV \-k joh1:1 +Shows John 1:1 in King James Version. +.TP +diatheke \-b RWP \-k Matthew 2:2 +Shows Matthew 2:2 in Robertson's Word Pictures commentary. +.TP +diatheke \-b WebstersDict \-k bible +Show entry "bible" in Websters Dictionary. +.TP +diatheke \-b system \-k modulelist +Shows the list of available modules. +.TP +diatheke \-b KJV \-o fmslx \-f OSIS \-e Latin1 \-k john 1:1-3 +Shows John 1:1-3 from KJV in OSIS XML format in iso8859-1 encoding with footnotes, +morphology, cross-references, lemmas and words of Christ in red. (The module may not +support all options and those have no effect. KJV includes only ASCII characters so +encoding has no effect.) +.TP +diatheke \-b GerLut \-l de \-m 10 \-k Offenbarung +Shows the first 10 verses of Revelation in German GerLut version, +both input and output keys are localized. +.TP +diatheke \-b KJV \-s phrase \-r Mt \-k love +Shows those verse keys which include phrase "love" in Gospel of Matthew in KJV module. +.SH DIAGNOSTICS +Currently diatheke exits always with status 0. If only Bible verse key and +module name are shown it means that the module did not have any content in +that range. If only module name is shown the key may have been bad. If +nothing is shown the book name may have been bad. If Segmentation fault +is shown diatheke has been bad. +.SH SEE ALSO +.I http://www.crosswire.org/sword/ +.SH COPYRIGHT +Sword library: \(co 1994-2006 Crosswire Bible Society, +released under GPL licence. +Diatheke: written by Chris Little, +\(co 1999-2006 Crosswire Bible Society, released under GPL licence. +This manpage was written by Eeli Kaikkonen and may be used freely. --- sword-1.5.11.orig/debian/imp2vs.1.pod +++ sword-1.5.11/debian/imp2vs.1.pod @@ -0,0 +1,44 @@ +# This is manual page in Perl POD format. Read more at +# http://perldoc.perl.org/perlpod.html or run command: +# +# perldoc perlpod | less +# +# To check the syntax: +# +# podchecker *.pod +# +# Create manual page with command: +# +# pod2man PAGE.N.pod > PAGE.N + +=head1 NAME + +imp2vs - Bible/Commentary module creation tool + +=head1 SYNOPSIS + +B [PATH] + +=head1 DESCRIPTION + +A command line utility to convert imp formatted file Bible/Commentary SWORD +module. + +=head1 OPTIONS + +=over + +=item B<[PATH]> + +Specify path for the output module if different from the input file. + +=back + +=head1 Authors + +This manual page was written by Dmitrijs Ledkovs for +Debian project but may be used by others. + +=head1 SEE ALSO + +=cut --- sword-1.5.11.orig/debian/diatheke.docs +++ sword-1.5.11/debian/diatheke.docs @@ -0,0 +1 @@ +utilities/diatheke/README --- sword-1.5.11.orig/debian/patches/06_warnings.diff +++ sword-1.5.11/debian/patches/06_warnings.diff @@ -0,0 +1,2009 @@ +Index: sword-1.5.9/include/swmodule.h +=================================================================== +--- sword-1.5.9.orig/include/swmodule.h 2006-08-28 01:39:56.000000000 +0100 ++++ sword-1.5.9/include/swmodule.h 2006-11-24 17:13:59.000000000 +0000 +@@ -399,16 +399,16 @@ + * @param path path where to create the new module + * @return error + */ +- static signed char createModule(const char *path) { return -1; } ++ static signed char createModule(const char *) { return -1; } + + /** Modify the current module entry text - only if module isWritable() + */ +- virtual void setEntry(const char *inbuf, long len = -1) { } ++ virtual void setEntry(const char *, long = -1) { } + + /** Link the current module entry to another module entry - only if + * module isWritable() + */ +- virtual void linkEntry(const SWKey *sourceKey) { } ++ virtual void linkEntry(const SWKey *) { } + + /** Delete current module entry - only if module isWritable() + */ +Index: sword-1.5.9/include/swbuf.h +=================================================================== +--- sword-1.5.9.orig/include/swbuf.h 2006-08-28 09:14:40.000000000 +0100 ++++ sword-1.5.9/include/swbuf.h 2006-11-24 17:13:59.000000000 +0000 +@@ -338,7 +338,7 @@ + inline bool operator >=(const SWBuf &other) const { return compare(other) >= 0; } + + inline bool startsWith(const char *prefix) const { return !strncmp(c_str(), prefix, strlen(prefix)); } +- inline bool endsWith(const char *postfix) const { int psize = strlen(postfix); return (size() >= psize)?!strncmp(end-psize, postfix, psize):false; } ++ inline bool endsWith(const char *postfix) const { unsigned long psize = strlen(postfix); return (size() >= psize)?!strncmp(end-psize, postfix, psize):false; } + inline int compare(const char *other) const { return strcmp(c_str(), other); } + inline bool operator ==(const char *other) const { return !compare(other); } + inline bool operator !=(const char *other) const { return compare(other); } +Index: sword-1.5.9/src/keys/listkey.cpp +=================================================================== +--- sword-1.5.9.orig/src/keys/listkey.cpp 2006-11-24 17:20:25.000000000 +0000 ++++ sword-1.5.9/src/keys/listkey.cpp 2006-11-24 17:20:48.000000000 +0000 +@@ -293,7 +293,6 @@ + + void ListKey::setText(const char *ikey) { + // at least try to set the current element to this text +- int pos = arraypos; + for (arraypos = 0; arraypos < arraycnt; arraypos++) { + SWKey *key = array[arraypos]; + if (key) { +Index: sword-1.5.9/src/keys/treekeyidx.cpp +=================================================================== +--- sword-1.5.9.orig/src/keys/treekeyidx.cpp 2006-11-24 17:21:17.000000000 +0000 ++++ sword-1.5.9/src/keys/treekeyidx.cpp 2006-11-24 20:50:55.000000000 +0000 +@@ -159,11 +159,11 @@ + + bool TreeKeyIdx::previousSibling() { + TreeNode iterator; +- __u32 target = currentNode.offset; ++ __s32 target = currentNode.offset; + if (currentNode.parent > -1) { + getTreeNodeFromIdxOffset(currentNode.parent, &iterator); + getTreeNodeFromIdxOffset(iterator.firstChild, &iterator); +- if (iterator.offset != target) { ++ if (iterator.offset != currentNode.offset) { + while ((iterator.next != target) && (iterator.next > -1)) + getTreeNodeFromIdxOffset(iterator.next, &iterator); + if (iterator.next > -1) { +Index: sword-1.5.9/src/keys/versekey.cpp +=================================================================== +--- sword-1.5.9.orig/src/keys/versekey.cpp 2006-11-24 20:51:27.000000000 +0000 ++++ sword-1.5.9/src/keys/versekey.cpp 2006-11-24 20:55:34.000000000 +0000 +@@ -329,7 +329,7 @@ + + int VerseKey::getBookAbbrev(const char *iabbr) + { +- int loop, diff, abLen, min, max, target, retVal = -1; ++ int diff, abLen, min, max, target, retVal = -1; + + char *abbr = 0; + +@@ -417,7 +417,7 @@ + SWKey tmpDefaultKey = defaultKey; + char lastPartial = 0; + bool inTerm = true; +- int notAllDigits; ++ int notAllDigits = 0; + + curkey.AutoNormalize(0); + tmpListKey << tmpDefaultKey; +@@ -1530,7 +1530,7 @@ + + const char *VerseKey::getOSISRef() const { + static char buf[5][254]; +- static char loop = 0; ++ static int loop = 0; + + if (loop > 4) + loop = 0; +@@ -1541,7 +1541,7 @@ + sprintf(buf[loop], "%s.%d", osisbooks[Testament()-1][Book()-1], (int)Chapter()); + else if (Book()) + sprintf(buf[loop], "%s", osisbooks[Testament()-1][Book()-1]); +- else sprintf(buf[loop], ""); ++ else buf[loop][0] = 0; + return buf[loop++]; + } + +Index: sword-1.5.9/src/utilfuns/ftpparse.c +=================================================================== +--- sword-1.5.9.orig/src/utilfuns/ftpparse.c 2006-11-24 22:50:00.000000000 +0000 ++++ sword-1.5.9/src/utilfuns/ftpparse.c 2006-11-24 22:51:53.000000000 +0000 +@@ -109,6 +109,7 @@ + if (now - t < 350 * 86400) + return t; + } ++ return 0; + } + + static int check(char *buf,char *monthname) +@@ -145,10 +146,10 @@ + int i; + int j; + int state; +- long size; ++ long size = 0; + long year; +- long month; +- long mday; ++ long month = 0; ++ long mday = 0; + long hour; + long minute; + +Index: sword-1.5.9/src/utilfuns/swbuf.cpp +=================================================================== +--- sword-1.5.9.orig/src/utilfuns/swbuf.cpp 2006-11-24 20:55:56.000000000 +0000 ++++ sword-1.5.9/src/utilfuns/swbuf.cpp 2006-11-24 22:49:42.000000000 +0000 +@@ -108,7 +108,7 @@ + */ + void SWBuf::setSize(unsigned long len) { + assureSize(len+1); +- if ((end - buf) < len) ++ if ((end - buf) < (signed)len) + memset(end, fillByte, len - (end-buf)); + end = buf + len; + *end = 0; +Index: sword-1.5.9/src/utilfuns/url.cpp +=================================================================== +--- sword-1.5.9.orig/src/utilfuns/url.cpp 2006-11-24 22:52:02.000000000 +0000 ++++ sword-1.5.9/src/utilfuns/url.cpp 2006-11-24 22:52:13.000000000 +0000 +@@ -93,7 +93,6 @@ + + //1. Init + const char* urlPtr = url.c_str(); +- int pos = 0; + + protocol = ""; + hostname = ""; +Index: sword-1.5.9/src/utilfuns/zlib/untgz.c +=================================================================== +--- sword-1.5.9.orig/src/utilfuns/zlib/untgz.c 2006-11-24 22:52:48.000000000 +0000 ++++ sword-1.5.9/src/utilfuns/zlib/untgz.c 2006-11-25 13:08:49.000000000 +0000 +@@ -1,8 +1,9 @@ + /* +- * untgz.c -- Display contents and/or extract file from +- * a gzip'd TAR file +- * written by "Pedro A. Aranda Guti\irrez" ++ * untgz.c -- Display contents and extract files from a gzip'd TAR file ++ * ++ * written by Pedro A. Aranda Gutierrez + * adaptation to Unix by Jean-loup Gailly ++ * various fixes by Cosmin Truta + */ + + #include +@@ -10,205 +11,318 @@ + #include + #include + #include +-#include ++ ++#include "zlib.h" ++ + #ifdef unix +-# include ++# include ++# include + #else +-# include +-# include ++# include ++# include + #endif + +-#include "zlib.h" +- + #ifdef WIN32 +-# include ++#include + # ifndef F_OK +-# define F_OK (0) ++# define F_OK 0 + # endif ++# define mkdir(dirname,mode) _mkdir(dirname) + # ifdef _MSC_VER +-# define mkdir(dirname,mode) _mkdir(dirname) +-# define strdup(str) _strdup(str) +-# define unlink(fn) _unlink(fn) + # define access(path,mode) _access(path,mode) +-# else +-# define mkdir(dirname,mode) _mkdir(dirname) ++# define chmod(path,mode) _chmod(path,mode) ++# define strdup(str) _strdup(str) + # endif + #else + # include + #endif + + +-/* Values used in typeflag field. */ ++/* values used in typeflag field */ ++ ++#define REGTYPE '0' /* regular file */ ++#define AREGTYPE '\0' /* regular file */ ++#define LNKTYPE '1' /* link */ ++#define SYMTYPE '2' /* reserved */ ++#define CHRTYPE '3' /* character special */ ++#define BLKTYPE '4' /* block special */ ++#define DIRTYPE '5' /* directory */ ++#define FIFOTYPE '6' /* FIFO special */ ++#define CONTTYPE '7' /* reserved */ ++ ++/* GNU tar extensions */ ++ ++#define GNUTYPE_DUMPDIR 'D' /* file names from dumped directory */ ++#define GNUTYPE_LONGLINK 'K' /* long link name */ ++#define GNUTYPE_LONGNAME 'L' /* long file name */ ++#define GNUTYPE_MULTIVOL 'M' /* continuation of file from another volume */ ++#define GNUTYPE_NAMES 'N' /* file name that does not fit into main hdr */ ++#define GNUTYPE_SPARSE 'S' /* sparse file */ ++#define GNUTYPE_VOLHDR 'V' /* tape/volume header */ + +-#define REGTYPE '0' /* regular file */ +-#define AREGTYPE '\0' /* regular file */ +-#define LNKTYPE '1' /* link */ +-#define SYMTYPE '2' /* reserved */ +-#define CHRTYPE '3' /* character special */ +-#define BLKTYPE '4' /* block special */ +-#define DIRTYPE '5' /* directory */ +-#define FIFOTYPE '6' /* FIFO special */ +-#define CONTTYPE '7' /* reserved */ + +-#define BLOCKSIZE 512 ++/* tar header */ ++ ++#define BLOCKSIZE 512 ++#define SHORTNAMESIZE 100 + + struct tar_header +-{ /* byte offset */ +- char name[100]; /* 0 */ +- char mode[8]; /* 100 */ +- char uid[8]; /* 108 */ +- char gid[8]; /* 116 */ +- char size[12]; /* 124 */ +- char mtime[12]; /* 136 */ +- char chksum[8]; /* 148 */ +- char typeflag; /* 156 */ +- char linkname[100]; /* 157 */ +- char magic[6]; /* 257 */ +- char version[2]; /* 263 */ +- char uname[32]; /* 265 */ +- char gname[32]; /* 297 */ +- char devmajor[8]; /* 329 */ +- char devminor[8]; /* 337 */ +- char prefix[155]; /* 345 */ +- /* 500 */ ++{ /* byte offset */ ++ char name[100]; /* 0 */ ++ char mode[8]; /* 100 */ ++ char uid[8]; /* 108 */ ++ char gid[8]; /* 116 */ ++ char size[12]; /* 124 */ ++ char mtime[12]; /* 136 */ ++ char chksum[8]; /* 148 */ ++ char typeflag; /* 156 */ ++ char linkname[100]; /* 157 */ ++ char magic[6]; /* 257 */ ++ char version[2]; /* 263 */ ++ char uname[32]; /* 265 */ ++ char gname[32]; /* 297 */ ++ char devmajor[8]; /* 329 */ ++ char devminor[8]; /* 337 */ ++ char prefix[155]; /* 345 */ ++ /* 500 */ + }; + +-union tar_buffer { ++union tar_buffer ++{ + char buffer[BLOCKSIZE]; + struct tar_header header; + }; + +-enum { TGZ_EXTRACT = 0, TGZ_LIST }; ++struct attr_item ++{ ++ struct attr_item *next; ++ char *fname; ++ int mode; ++ time_t time; ++}; + +-static char *TGZfname OF((const char *)); +-void TGZnotfound OF((const char *)); ++enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID }; + +-int getoct OF((char *, int)); +-char *strtime OF((time_t *)); +-int ExprMatch OF((char *,char *)); ++char *TGZfname OF((const char *)); ++void TGZnotfound OF((const char *)); + +-int makedir OF((char *)); +-int matchname OF((int,int,char **,char *)); ++int getoct OF((char *, int)); ++char *strtime OF((time_t *)); ++int setfiletime OF((char *, time_t)); ++void push_attr OF((struct attr_item **, char *, int, time_t)); ++void restore_attr OF((struct attr_item **)); + +-void error OF((const char *)); +-int tar OF((gzFile, int, int, int, char **)); ++int ExprMatch OF((char *, char *)); + +-void help OF((int)); +-int main OF((int, char **)); ++int makedir OF((char *)); ++int matchname OF((int, int, char **, char *)); + +-char *prog; ++void error OF((const char *)); ++int tar OF((gzFile, int, const char *, int, int, char **)); + +-/* This will give a benign warning */ ++void help OF((int)); ++int main OF((int, char **)); ++ ++char *prog; + +-static char *TGZprefix[] = { "\0", ".tgz", ".tar.gz", ".tar", NULL }; ++const char *TGZsuffix[] = { "\0", ".tar", ".tar.gz", ".taz", ".tgz", NULL }; + +-/* Return the real name of the TGZ archive */ +-/* or NULL if it does not exist. */ ++/* return the file name of the TGZ archive */ ++/* or NULL if it does not exist */ + +-static char *TGZfname OF((const char *fname)) ++char *TGZfname (const char *arcname) + { + static char buffer[1024]; + int origlen,i; +- +- strcpy(buffer,fname); ++ ++ strcpy(buffer,arcname); + origlen = strlen(buffer); + +- for (i=0; TGZprefix[i]; i++) ++ for (i=0; TGZsuffix[i]; i++) + { +- strcpy(buffer+origlen,TGZprefix[i]); ++ strcpy(buffer+origlen,TGZsuffix[i]); + if (access(buffer,F_OK) == 0) + return buffer; + } + return NULL; + } + ++ + /* error message for the filename */ + +-void TGZnotfound OF((const char *fname)) ++void TGZnotfound (const char *arcname) + { + int i; + +- fprintf(stderr,"%s : couldn't find ",prog); +- for (i=0;TGZprefix[i];i++) +- fprintf(stderr,(TGZprefix[i+1]) ? "%s%s, " : "or %s%s\n", +- fname, +- TGZprefix[i]); ++ fprintf(stderr,"%s: Couldn't find ",prog); ++ for (i=0;TGZsuffix[i];i++) ++ fprintf(stderr,(TGZsuffix[i+1]) ? "%s%s, " : "or %s%s\n", ++ arcname, ++ TGZsuffix[i]); + exit(1); + } + + +-/* help functions */ ++/* convert octal digits to int */ ++/* on error return -1 */ + +-int getoct(char *p,int width) ++int getoct (char *p,int width) + { + int result = 0; + char c; +- +- while (width --) ++ ++ while (width--) + { + c = *p++; +- if (c == ' ') +- continue; + if (c == 0) +- break; ++ break; ++ if (c == ' ') ++ continue; ++ if (c < '0' || c > '7') ++ return -1; + result = result * 8 + (c - '0'); + } + return result; + } + ++ ++/* convert time_t to string */ ++/* use the "YYYY/MM/DD hh:mm:ss" format */ ++ + char *strtime (time_t *t) + { + struct tm *local; + static char result[32]; + + local = localtime(t); +- sprintf(result,"%2d/%02d/%4d %02d:%02d:%02d", +- local->tm_mday, local->tm_mon+1, local->tm_year+1900, +- local->tm_hour, local->tm_min, local->tm_sec); ++ sprintf(result,"%4d/%02d/%02d %02d:%02d:%02d", ++ local->tm_year+1900, local->tm_mon+1, local->tm_mday, ++ local->tm_hour, local->tm_min, local->tm_sec); ++ return result; ++} ++ ++ ++/* set file time */ ++ ++int setfiletime (char *fname,time_t ftime) ++{ ++#ifdef WIN32 ++ static int isWinNT = -1; ++ SYSTEMTIME st; ++ FILETIME locft, modft; ++ struct tm *loctm; ++ HANDLE hFile; ++ int result; ++ ++ loctm = localtime(&ftime); ++ if (loctm == NULL) ++ return -1; ++ ++ st.wYear = (WORD)loctm->tm_year + 1900; ++ st.wMonth = (WORD)loctm->tm_mon + 1; ++ st.wDayOfWeek = (WORD)loctm->tm_wday; ++ st.wDay = (WORD)loctm->tm_mday; ++ st.wHour = (WORD)loctm->tm_hour; ++ st.wMinute = (WORD)loctm->tm_min; ++ st.wSecond = (WORD)loctm->tm_sec; ++ st.wMilliseconds = 0; ++ if (!SystemTimeToFileTime(&st, &locft) || ++ !LocalFileTimeToFileTime(&locft, &modft)) ++ return -1; ++ ++ if (isWinNT < 0) ++ isWinNT = (GetVersion() < 0x80000000) ? 1 : 0; ++ hFile = CreateFile(fname, GENERIC_WRITE, 0, NULL, OPEN_EXISTING, ++ (isWinNT ? FILE_FLAG_BACKUP_SEMANTICS : 0), ++ NULL); ++ if (hFile == INVALID_HANDLE_VALUE) ++ return -1; ++ result = SetFileTime(hFile, NULL, NULL, &modft) ? 0 : -1; ++ CloseHandle(hFile); + return result; ++#else ++ struct utimbuf settime; ++ ++ settime.actime = settime.modtime = ftime; ++ return utime(fname,&settime); ++#endif ++} ++ ++ ++/* push file attributes */ ++ ++void push_attr(struct attr_item **list,char *fname,int mode,time_t time) ++{ ++ struct attr_item *item; ++ ++ item = (struct attr_item *)malloc(sizeof(struct attr_item)); ++ if (item == NULL) ++ error("Out of memory"); ++ item->fname = strdup(fname); ++ item->mode = mode; ++ item->time = time; ++ item->next = *list; ++ *list = item; ++} ++ ++ ++/* restore file attributes */ ++ ++void restore_attr(struct attr_item **list) ++{ ++ struct attr_item *item, *prev; ++ ++ for (item = *list; item != NULL; ) ++ { ++ setfiletime(item->fname,item->time); ++ chmod(item->fname,item->mode); ++ prev = item; ++ item = item->next; ++ free(prev); ++ } ++ *list = NULL; + } + + +-/* regular expression matching */ ++/* match regular expression */ + + #define ISSPECIAL(c) (((c) == '*') || ((c) == '/')) + +-int ExprMatch(char *string,char *expr) ++int ExprMatch (char *string,char *expr) + { + while (1) + { + if (ISSPECIAL(*expr)) +- { +- if (*expr == '/') +- { +- if (*string != '\\' && *string != '/') +- return 0; +- string ++; expr++; +- } +- else if (*expr == '*') +- { +- if (*expr ++ == 0) +- return 1; +- while (*++string != *expr) +- if (*string == 0) +- return 0; +- } +- } ++ { ++ if (*expr == '/') ++ { ++ if (*string != '\\' && *string != '/') ++ return 0; ++ string ++; expr++; ++ } ++ else if (*expr == '*') ++ { ++ if (*expr ++ == 0) ++ return 1; ++ while (*++string != *expr) ++ if (*string == 0) ++ return 0; ++ } ++ } + else +- { +- if (*string != *expr) +- return 0; +- if (*expr++ == 0) +- return 1; +- string++; +- } ++ { ++ if (*string != *expr) ++ return 0; ++ if (*expr++ == 0) ++ return 1; ++ string++; ++ } + } + } + +-/* recursive make directory */ +-/* abort if you get an ENOENT errno somewhere in the middle */ +-/* e.g. ignore error "mkdir on existing directory" */ +-/* */ ++ ++/* recursive mkdir */ ++/* abort on ENOENT; ignore other errors like "directory already exists" */ + /* return 1 if OK */ + /* 0 on error */ + +@@ -217,7 +331,7 @@ + char *buffer = strdup(newdir); + char *p; + int len = strlen(buffer); +- ++ + if (len <= 0) { + free(buffer); + return 0; +@@ -225,7 +339,7 @@ + if (buffer[len-1] == '/') { + buffer[len-1] = '\0'; + } +- if (mkdir(buffer, 0775) == 0) ++ if (mkdir(buffer, 0755) == 0) + { + free(buffer); + return 1; +@@ -235,202 +349,356 @@ + while (1) + { + char hold; +- ++ + while(*p && *p != '\\' && *p != '/') +- p++; ++ p++; + hold = *p; + *p = 0; +- if ((mkdir(buffer, 0775) == -1) && (errno == ENOENT)) +- { +- fprintf(stderr,"%s: couldn't create directory %s\n",prog,buffer); +- free(buffer); +- return 0; +- } ++ if ((mkdir(buffer, 0755) == -1) && (errno == ENOENT)) ++ { ++ fprintf(stderr,"%s: Couldn't create directory %s\n",prog,buffer); ++ free(buffer); ++ return 0; ++ } + if (hold == 0) +- break; ++ break; + *p++ = hold; + } + free(buffer); + return 1; + } + ++ + int matchname (int arg,int argc,char **argv,char *fname) + { +- if (arg == argc) /* no arguments given (untgz tgzarchive) */ ++ if (arg == argc) /* no arguments given (untgz tgzarchive) */ + return 1; + + while (arg < argc) + if (ExprMatch(fname,argv[arg++])) +- return 1; ++ return 1; + + return 0; /* ignore this for the moment being */ + } + + +-/* Tar file list or extract */ ++/* tar file list or extract */ + +-int untar (gzFile in, const char *dest) { +- union tar_buffer buffer; +- int len; +- int err; +- int getheader = 1; +- int remaining = 0; +- FILE *outfile = NULL; +- char fname[BLOCKSIZE]; +- time_t tartime; +- +- while (1) { +- len = gzread(in, &buffer, BLOCKSIZE); +- if (len < 0) +- error (gzerror(in, &err)); +- /* +- * Always expect complete blocks to process +- * the tar information. +- */ +- if (len != BLOCKSIZE) +- error("gzread: incomplete block read"); +- +- /* +- * If we have to get a tar header +- */ +- if (getheader == 1) { +- /* +- * if we met the end of the tar +- * or the end-of-tar block, +- * we are done +- */ +- if ((len == 0) || (buffer.header.name[0]== 0)) break; +- +- tartime = (time_t)getoct(buffer.header.mtime,12); +- strcpy(fname, dest); +- if ((fname[strlen(fname)-1] != '/') && (fname[strlen(fname)-1] != '\\')) +- strcat(fname, "/"); +- strcat(fname, buffer.header.name); +- +- switch (buffer.header.typeflag) { +- case DIRTYPE: +- makedir(fname); +- break; +- case REGTYPE: +- case AREGTYPE: +- remaining = getoct(buffer.header.size,12); +- if (remaining) { +- outfile = fopen(fname,"wb"); +- if (outfile == NULL) { +- // try creating directory +- char *p = strrchr(fname, '/'); +- if (p != NULL) { +- *p = '\0'; +- makedir(fname); +- *p = '/'; +- outfile = fopen(fname,"wb"); +- } +- } +-/* +- fprintf(stderr, +- "%s %s\n", +- (outfile) ? "Extracting" : "Couldn't create", +- fname); +-*/ +- } +- else +- outfile = NULL; +- /* +- * could have no contents +- */ +- getheader = (remaining) ? 0 : 1; +- break; +- default: +- break; +- } +- } +- else { +- unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining; +- +- if (outfile != NULL) { +- if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes) { +- fprintf(stderr,"%s : error writing %s skipping...\n",prog,fname); +- fclose(outfile); +- unlink(fname); +- } +- } +- remaining -= bytes; +- if (remaining == 0) { +- getheader = 1; +- if (outfile != NULL) { +-#ifdef WIN32 +- HANDLE hFile; +- FILETIME ftm,ftLocal; +- SYSTEMTIME st; +- struct tm localt; +- +- fclose(outfile); +- +- localt = *localtime(&tartime); +- +- hFile = CreateFile(fname, GENERIC_READ | GENERIC_WRITE, +- 0, NULL, OPEN_EXISTING, 0, NULL); +- +- st.wYear = (WORD)localt.tm_year+1900; +- st.wMonth = (WORD)localt.tm_mon; +- st.wDayOfWeek = (WORD)localt.tm_wday; +- st.wDay = (WORD)localt.tm_mday; +- st.wHour = (WORD)localt.tm_hour; +- st.wMinute = (WORD)localt.tm_min; +- st.wSecond = (WORD)localt.tm_sec; +- st.wMilliseconds = 0; +- SystemTimeToFileTime(&st,&ftLocal); +- LocalFileTimeToFileTime(&ftLocal,&ftm); +- SetFileTime(hFile,&ftm,NULL,&ftm); +- CloseHandle(hFile); ++//int tar (gzFile in,int action,int arg,int argc,char **argv) ++int tar (gzFile in,int action,const char *dest,int arg,int argc,char **argv) ++{ ++ union tar_buffer buffer; ++ int len; ++ int err; ++ int getheader = 1; ++ int remaining = 0; ++ FILE *outfile = NULL; ++ char fname[BLOCKSIZE]; ++ int tarmode = 0; ++ time_t tartime; ++ struct attr_item *attributes = NULL; ++ ++ if (action == TGZ_LIST) ++ printf(" date time size file\n" ++ " ---------- -------- --------- -------------------------------------\n"); ++ while (1) ++ { ++ len = gzread(in, &buffer, BLOCKSIZE); ++ if (len < 0) ++ error(gzerror(in, &err)); ++ /* ++ * Always expect complete blocks to process ++ * the tar information. ++ */ ++ if (len != BLOCKSIZE) ++ { ++ action = TGZ_INVALID; /* force error exit */ ++ remaining = 0; /* force I/O cleanup */ ++ } ++ ++ /* ++ * If we have to get a tar header ++ */ ++ if (getheader >= 1) ++ { ++ /* ++ * if we met the end of the tar ++ * or the end-of-tar block, ++ * we are done ++ */ ++ if (len == 0 || buffer.header.name[0] == 0) ++ break; ++ ++ tarmode = getoct(buffer.header.mode,8); ++ tartime = (time_t)getoct(buffer.header.mtime,12); ++ ++ // ADDED for Sword ++ strncpy(fname, dest, SHORTNAMESIZE); ++ if ((fname[strlen(fname)-1] != '/') && (fname[strlen(fname)-1] != '\\')) ++ strcat(fname, "/"); ++ // END addition ++ if (tarmode == -1 || tartime == (time_t)-1) ++ { ++ buffer.header.name[0] = 0; ++ action = TGZ_INVALID; ++ } ++ // MODIFIED for Sword ++ strncat(fname, buffer.header.name, BLOCKSIZE - strlen(fname) - 10); ++#if 0 ++ if (getheader == 1) ++ { ++ strncpy(fname,buffer.header.name,SHORTNAMESIZE); ++ if (fname[SHORTNAMESIZE-1] != 0) ++ fname[SHORTNAMESIZE] = 0; ++ } ++ // END modification ++ else ++ { ++ /* ++ * The file name is longer than SHORTNAMESIZE ++ */ ++ if (strncmp(fname,buffer.header.name,SHORTNAMESIZE-1) != 0) ++ error("bad long name"); ++ getheader = 1; ++ } ++#endif ++ /* ++ * Act according to the type flag ++ */ ++ switch (buffer.header.typeflag) ++ { ++ case DIRTYPE: ++ if (action == TGZ_LIST) ++ printf(" %s %s\n",strtime(&tartime),fname); ++ if (action == TGZ_EXTRACT) ++ { ++ makedir(fname); ++ push_attr(&attributes,fname,tarmode,tartime); ++ } ++ break; ++ case REGTYPE: ++ case AREGTYPE: ++ remaining = getoct(buffer.header.size,12); ++ if (remaining == -1) ++ { ++ action = TGZ_INVALID; ++ break; ++ } ++ if (action == TGZ_LIST) ++ printf(" %s %9d %s\n",strtime(&tartime),remaining,fname); ++ else if (action == TGZ_EXTRACT) ++ { ++ if (matchname(arg,argc,argv,fname)) ++ { ++ outfile = fopen(fname,"wb"); ++ if (outfile == NULL) { ++ /* try creating directory */ ++ char *p = strrchr(fname, '/'); ++ if (p != NULL) { ++ *p = '\0'; ++ makedir(fname); ++ *p = '/'; ++ outfile = fopen(fname,"wb"); ++ } ++ } ++ if (outfile != NULL) ++ printf("Extracting %s\n",fname); ++ else ++ fprintf(stderr, "%s: Couldn't create %s",prog,fname); ++ } ++ else ++ outfile = NULL; ++ } ++ getheader = 0; ++ break; ++ case GNUTYPE_LONGLINK: ++ case GNUTYPE_LONGNAME: ++ remaining = getoct(buffer.header.size,12); ++ if (remaining < 0 || remaining >= BLOCKSIZE) ++ { ++ action = TGZ_INVALID; ++ break; ++ } ++ len = gzread(in, fname, BLOCKSIZE); ++ if (len < 0) ++ error(gzerror(in, &err)); ++ if (fname[BLOCKSIZE-1] != 0 || (int)strlen(fname) > remaining) ++ { ++ action = TGZ_INVALID; ++ break; ++ } ++ getheader = 2; ++ break; ++ default: ++ if (action == TGZ_LIST) ++ printf(" %s <---> %s\n",strtime(&tartime),fname); ++ break; ++ } ++ } ++ else ++ { ++ unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining; + +- outfile = NULL; +-#else +- struct utimbuf settime; ++ if (outfile != NULL) ++ { ++ if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes) ++ { ++ fprintf(stderr, ++ "%s: Error writing %s -- skipping\n",prog,fname); ++ fclose(outfile); ++ outfile = NULL; ++ remove(fname); ++ } ++ } ++ remaining -= bytes; ++ } ++ ++ if (remaining == 0) ++ { ++ getheader = 1; ++ if (outfile != NULL) ++ { ++ fclose(outfile); ++ outfile = NULL; ++ if (action != TGZ_INVALID) ++ push_attr(&attributes,fname,tarmode,tartime); ++ } ++ } ++ ++ /* ++ * Abandon if errors are found ++ */ ++ if (action == TGZ_INVALID) ++ { ++ error("broken archive"); ++ break; ++ } ++ } + +- settime.actime = settime.modtime = tartime; ++ /* ++ * Restore file modes and time stamps ++ */ ++ restore_attr(&attributes); + +- fclose(outfile); +- outfile = NULL; +- utime(fname,&settime); +-#endif +- } +- } +- } +- } +- return 0; ++ if (gzclose(in) != Z_OK) ++ error("failed gzclose"); ++ ++ return 0; + } + + +-/* =========================================================== */ ++/* ============================================================ */ + + void help(int exitval) + { +- fprintf(stderr, +- "untgz v 0.1\n" +- " an sample application of zlib 1.0.4\n\n" +- "Usage : untgz TGZfile to extract all files\n" +- " untgz TGZfile fname ... to extract selected files\n" +- " untgz -l TGZfile to list archive contents\n" +- " untgz -h to display this help\n\n"); ++ printf("untgz version 0.2.1\n" ++ " using zlib version %s\n\n", ++ zlibVersion()); ++ printf("Usage: untgz file.tgz extract all files\n" ++ " untgz file.tgz fname ... extract selected files\n" ++ " untgz -l file.tgz list archive contents\n" ++ " untgz -h display this help\n"); + exit(exitval); + } + + void error(const char *msg) + { +- fprintf(stderr, "%s: %s\n", prog, msg); +- exit(1); ++ fprintf(stderr, "%s: %s\n", prog, msg); ++ exit(1); + } + + ++/* ============================================================ */ ++ ++#if defined(WIN32) && defined(__GNUC__) ++int _CRT_glob = 0; /* disable argument globbing in MinGW */ ++#endif ++ ++int untar(gzFile in, const char *dest) ++{ ++ return tar(in, TGZ_EXTRACT, dest, 0, 0 , NULL); ++} ++ + int untargz(int fd, const char *dest) { +- gzFile *f; ++ gzFile *f; + +- f = gzdopen(fd, "rb"); +- if (f == NULL) { +- fprintf(stderr,"%s: Couldn't gzopen file\n", prog); +- return 1; +- } ++ f = gzdopen(fd, "rb"); ++ if (f == NULL) { ++ fprintf(stderr,"%s: Couldn't gzopen file\n", prog); ++ return 1; ++ } + +- return untar(f, dest); ++ return untar(f, dest); + } ++ ++#if 0 ++int main(int argc,char **argv) ++{ ++ int action = TGZ_EXTRACT; ++ int arg = 1; ++ char *TGZfile; ++ gzFile *f; ++ ++ prog = strrchr(argv[0],'\\'); ++ if (prog == NULL) ++ { ++ prog = strrchr(argv[0],'/'); ++ if (prog == NULL) ++ { ++ prog = strrchr(argv[0],':'); ++ if (prog == NULL) ++ prog = argv[0]; ++ else ++ prog++; ++ } ++ else ++ prog++; ++ } ++ else ++ prog++; ++ ++ if (argc == 1) ++ help(0); ++ ++ if (strcmp(argv[arg],"-l") == 0) ++ { ++ action = TGZ_LIST; ++ if (argc == ++arg) ++ help(0); ++ } ++ else if (strcmp(argv[arg],"-h") == 0) ++ { ++ help(0); ++ } ++ ++ if ((TGZfile = TGZfname(argv[arg])) == NULL) ++ TGZnotfound(argv[arg]); ++ ++ ++arg; ++ if ((action == TGZ_LIST) && (arg != argc)) ++ help(1); ++ ++/* ++ * Process the TGZ file ++ */ ++ switch(action) ++ { ++ case TGZ_LIST: ++ case TGZ_EXTRACT: ++ f = gzopen(TGZfile,"rb"); ++ if (f == NULL) ++ { ++ fprintf(stderr,"%s: Couldn't gzopen %s\n",prog,TGZfile); ++ return 1; ++ } ++ exit(tar(f, action, arg, argc, argv)); ++ break; ++ ++ default: ++ error("Unknown option"); ++ exit(1); ++ } ++ ++ return 0; ++} ++#endif +Index: sword-1.5.9/include/ftptrans.h +=================================================================== +--- sword-1.5.9.orig/include/ftptrans.h 2006-11-25 11:56:18.000000000 +0000 ++++ sword-1.5.9/include/ftptrans.h 2006-11-25 11:59:03.000000000 +0000 +@@ -18,7 +18,8 @@ + /** Class for reporting status + */ + class SWDLLEXPORT StatusReporter { +-public: ++public: ++ virtual ~StatusReporter() {}; + /** Messages before stages of a batch download */ + virtual void preStatus(long totalBytes, long completedBytes, const char *message); + +Index: sword-1.5.9/src/mgr/filemgr.cpp +=================================================================== +--- sword-1.5.9.orig/src/mgr/filemgr.cpp 2006-11-25 12:01:21.000000000 +0000 ++++ sword-1.5.9/src/mgr/filemgr.cpp 2006-11-25 12:08:34.000000000 +0000 +@@ -490,7 +490,7 @@ + int FileMgr::copyDir(const char *srcDir, const char *destDir) { + DIR *dir; + struct dirent *ent; +- if (dir = opendir(srcDir)) { ++ if ((dir = opendir(srcDir))) { + rewinddir(dir); + while ((ent = readdir(dir))) { + if ((strcmp(ent->d_name, ".")) && (strcmp(ent->d_name, ".."))) { +Index: sword-1.5.9/src/mgr/ftptrans.cpp +=================================================================== +--- sword-1.5.9.orig/src/mgr/ftptrans.cpp 2006-11-25 12:08:52.000000000 +0000 ++++ sword-1.5.9/src/mgr/ftptrans.cpp 2006-11-25 12:09:27.000000000 +0000 +@@ -86,7 +86,7 @@ + + + int FTPTransport::copyDirectory(const char *urlPrefix, const char *dir, const char *dest, const char *suffix) { +- int i; ++ unsigned int i; + int retVal = 0; + + SWBuf url = SWBuf(urlPrefix) + SWBuf(dir); +Index: sword-1.5.9/src/mgr/installmgr.cpp +=================================================================== +--- sword-1.5.9.orig/src/mgr/installmgr.cpp 2006-11-25 12:09:52.000000000 +0000 ++++ sword-1.5.9/src/mgr/installmgr.cpp 2006-11-25 12:10:41.000000000 +0000 +@@ -145,7 +145,7 @@ + + FileMgr::removeDir(modDir.c_str()); + +- if (dir = opendir(manager->configPath)) { // find and remove .conf file ++ if ((dir = opendir(manager->configPath))) { // find and remove .conf file + rewinddir(dir); + while ((ent = readdir(dir))) { + if ((strcmp(ent->d_name, ".")) && (strcmp(ent->d_name, ".."))) { +@@ -210,7 +210,6 @@ + + int InstallMgr::ftpCopy(InstallSource *is, const char *src, const char *dest, bool dirTransfer, const char *suffix) { + int retVal = 0; +- long i; + FTPTransport *trans = createFTPTransport(is->source, statusReporter); + transport = trans; // set classwide current transport for other thread terminate() call + trans->setPassive(passive); +@@ -364,7 +363,7 @@ + } + if (!aborted) { + SWBuf confDir = sourceDir + "/mods.d/"; +- if (dir = opendir(confDir.c_str())) { // find and copy .conf file ++ if ((dir = opendir(confDir.c_str()))) { // find and copy .conf file + rewinddir(dir); + while ((ent = readdir(dir))) { + if ((strcmp(ent->d_name, ".")) && (strcmp(ent->d_name, ".."))) { +Index: sword-1.5.9/src/modules/comments/swcom.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/comments/swcom.cpp 2006-11-25 12:40:13.000000000 +0000 ++++ sword-1.5.9/src/modules/comments/swcom.cpp 2006-11-25 12:40:22.000000000 +0000 +@@ -75,7 +75,7 @@ + + + VerseKey &SWCom::getVerseKey() const { +- VerseKey *key; ++ VerseKey *key = NULL; + // see if we have a VerseKey * or decendant + SWTRY { + key = SWDYNAMIC_CAST(VerseKey, this->key); +Index: sword-1.5.9/src/modules/common/entriesblk.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/common/entriesblk.cpp 2006-11-25 12:15:11.000000000 +0000 ++++ sword-1.5.9/src/modules/common/entriesblk.cpp 2006-11-25 12:15:32.000000000 +0000 +@@ -142,9 +142,7 @@ + unsigned long dataSize; + getRawData(&dataSize); + getMetaEntry(entryIndex, &offset, &size); +- unsigned long len = size - 1; + int count = getCount(); +- unsigned long dataStart = METAHEADERSIZE + (count * METAENTRYSIZE); + + if (!offset) // already deleted + return; +Index: sword-1.5.9/src/modules/common/rawstr.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/common/rawstr.cpp 2006-11-25 12:11:58.000000000 +0000 ++++ sword-1.5.9/src/modules/common/rawstr.cpp 2006-11-25 12:12:36.000000000 +0000 +@@ -124,7 +124,6 @@ + + void RawStr::getIDXBuf(long ioffset, char **buf) + { +- char *trybuf, *targetbuf; + long offset; + + if (idxfd > 0) { +@@ -152,7 +151,7 @@ + + signed char RawStr::findOffset(const char *ikey, long *start, unsigned short *size, long away, long *idxoff) + { +- char *trybuf, *targetbuf, *key = 0, quitflag = 0; ++ char *trybuf, *key = 0, quitflag = 0; + signed char retval = -1; + long headoff, tailoff, tryoff = 0, maxoff = 0; + +Index: sword-1.5.9/src/modules/common/rawstr4.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/common/rawstr4.cpp 2006-11-25 12:12:41.000000000 +0000 ++++ sword-1.5.9/src/modules/common/rawstr4.cpp 2006-11-25 12:13:43.000000000 +0000 +@@ -123,7 +123,6 @@ + + void RawStr4::getIDXBuf(long ioffset, char **buf) + { +- char *trybuf, *targetbuf; + long offset; + + if (idxfd > 0) { +@@ -160,7 +159,7 @@ + + signed char RawStr4::findOffset(const char *ikey, long *start, unsigned long *size, long away, long *idxoff) + { +- char *trybuf, *targetbuf, *key = 0, quitflag = 0; ++ char *trybuf, *key = 0, quitflag = 0; + signed char retval = -1; + long headoff, tailoff, tryoff = 0, maxoff = 0; + +@@ -372,7 +371,7 @@ + while (true); // while we're resolving links + + if (idxbuflocal) { +- int localsize = strlen(idxbuflocal); ++ unsigned int localsize = strlen(idxbuflocal); + localsize = (localsize < (*isize - 1)) ? localsize : (*isize - 1); + strncpy(*idxbuf, idxbuflocal, localsize); + (*idxbuf)[localsize] = 0; +Index: sword-1.5.9/src/modules/common/zstr.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/common/zstr.cpp 2006-11-25 12:14:25.000000000 +0000 ++++ sword-1.5.9/src/modules/common/zstr.cpp 2006-11-25 12:14:57.000000000 +0000 +@@ -619,7 +619,7 @@ + rawZFilter(buf, 1); // 1 = encipher + + long zdxSize = zdxfd->seek(0, SEEK_END); +- long zdtSize = zdtfd->seek(0, SEEK_END); ++ unsigned long zdtSize = zdtfd->seek(0, SEEK_END); + + if ((cacheBlockIndex * ZDXENTRYSIZE) > (zdxSize - ZDXENTRYSIZE)) { // New Block + start = zdtSize; +Index: sword-1.5.9/src/modules/common/zverse.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/common/zverse.cpp 2006-11-25 12:13:58.000000000 +0000 ++++ sword-1.5.9/src/modules/common/zverse.cpp 2006-11-25 12:14:08.000000000 +0000 +@@ -140,7 +140,6 @@ + unsigned long ulCompOffset=0; // compressed buffer start + unsigned long ulCompSize=0; // buffer size compressed + unsigned long ulUnCompSize=0; // buffer size uncompressed +- char *pcCompText=NULL; // compressed text + + *start = *size = 0; + //printf ("Finding offset %ld\n", idxoff); +Index: sword-1.5.9/src/modules/filters/gbfheadings.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/gbfheadings.cpp 2006-11-25 12:29:24.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/gbfheadings.cpp 2006-11-25 12:29:37.000000000 +0000 +@@ -31,7 +31,6 @@ + char token[2048]; // cheese. Fix. + int tokpos = 0; + bool intoken = false; +- int len; + bool hide = false; + + const char *from; +Index: sword-1.5.9/src/modules/filters/gbfhtmlhref.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/gbfhtmlhref.cpp 2006-11-25 12:27:35.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/gbfhtmlhref.cpp 2006-11-25 12:28:00.000000000 +0000 +@@ -72,9 +72,6 @@ + + bool GBFHTMLHREF::handleToken(SWBuf &buf, const char *token, BasicFilterUserData *userData) { + const char *tok; +- char val[128]; +- char *valto; +- const char *num; + MyUserData *u = (MyUserData *)userData; + + if (!substituteToken(buf, token)) { +@@ -227,7 +224,7 @@ + else if (!strcmp(tag.getName(), "RF")) { + SWBuf type = tag.getAttribute("type"); + SWBuf footnoteNumber = tag.getAttribute("swordFootnote"); +- VerseKey *vkey; ++ VerseKey *vkey = NULL; + // see if we have a VerseKey * or descendant + SWTRY { + vkey = SWDYNAMIC_CAST(VerseKey, u->key); +Index: sword-1.5.9/src/modules/filters/gbfmorph.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/gbfmorph.cpp 2006-11-25 12:30:20.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/gbfmorph.cpp 2006-11-25 12:30:31.000000000 +0000 +@@ -31,7 +31,6 @@ + char token[2048]; // cheese. Fix. + int tokpos = 0; + bool intoken = false; +- int len; + bool lastspace = false; + + SWBuf orig = text; +Index: sword-1.5.9/src/modules/filters/gbfosis.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/gbfosis.cpp 2006-11-25 12:35:45.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/gbfosis.cpp 2006-11-25 12:36:22.000000000 +0000 +@@ -36,8 +36,6 @@ + SWBuf tmp; + SWBuf value; + +- bool newtext = false; +- + bool suspendTextPassThru = false; + bool handled = false; + bool newWord = false; +@@ -45,15 +43,13 @@ + bool lastspace = false; + + const char *wordStart = text.c_str(); +- const char *wordEnd; ++ const char *wordEnd = NULL; + +- const char *textStart; +- const char *textEnd; ++ const char *textStart = NULL; ++ const char *textEnd = NULL; + + SWBuf textNode = ""; + +- char wordstr[5]; +- + SWBuf buf; + + text = ""; +Index: sword-1.5.9/src/modules/filters/gbfredletterwords.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/gbfredletterwords.cpp 2006-11-25 12:29:53.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/gbfredletterwords.cpp 2006-11-25 12:30:08.000000000 +0000 +@@ -35,7 +35,6 @@ + char token[4096]; // cheese. Fix. + int tokpos = 0; + bool intoken = false; +- int len; + bool hide = false; + + const char *from; +Index: sword-1.5.9/src/modules/filters/gbfrtf.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/gbfrtf.cpp 2006-11-25 12:28:19.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/gbfrtf.cpp 2006-11-25 12:28:34.000000000 +0000 +@@ -23,14 +23,12 @@ + char *num; + int tokpos = 0; + bool intoken = false; +- int len; + const char *tok; + SWBuf strongnum; + SWBuf strongtense; + bool hideText = false; + int wordLen = 0; + int wordCount = 0; +- int i; + + const char *from; + SWBuf orig = text; +Index: sword-1.5.9/src/modules/filters/gbfstrongs.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/gbfstrongs.cpp 2006-11-25 12:28:46.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/gbfstrongs.cpp 2006-11-25 12:29:05.000000000 +0000 +@@ -32,13 +32,11 @@ + char token[2048]; // cheese. Fix. + int tokpos = 0; + bool intoken = false; +- int len; + bool lastspace = false; + int word = 1; + char val[128]; + char wordstr[5]; + char *valto; +- char *ch; + unsigned int textStart = 0, textEnd = 0; + bool newText = false; + SWBuf tmp; +Index: sword-1.5.9/src/modules/filters/gbfthml.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/gbfthml.cpp 2006-11-25 12:35:23.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/gbfthml.cpp 2006-11-25 12:35:32.000000000 +0000 +@@ -30,7 +30,6 @@ + char token[2048]; + int tokpos = 0; + bool intoken = false; +- int len; + const char *tok; + + SWBuf orig = text; +Index: sword-1.5.9/src/modules/filters/gbfwordjs.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/gbfwordjs.cpp 2006-11-25 12:30:42.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/gbfwordjs.cpp 2006-11-25 12:31:25.000000000 +0000 +@@ -44,11 +44,8 @@ + bool lastspace = false; + int word = 1; + char val[128]; +- char *valto; +- char *ch; + char wordstr[5]; + unsigned int textStart = 0, lastAppendLen = 0, textEnd = 0; +- char gh = 0; + SWBuf tmp; + bool newText = false; + bool needWordOut = false; +@@ -166,7 +163,7 @@ + else { + wordID = key->getText(); + } +- for (int i = 0; i < wordID.size(); i++) { ++ for (unsigned int i = 0; i < wordID.size(); i++) { + if ((!isdigit(wordID[i])) && (!isalpha(wordID[i]))) { + wordID[i] = '_'; + } +@@ -258,7 +255,7 @@ + else { + wordID = key->getText(); + } +- for (int i = 0; i < wordID.size(); i++) { ++ for (unsigned int i = 0; i < wordID.size(); i++) { + if ((!isdigit(wordID[i])) && (!isalpha(wordID[i]))) { + wordID[i] = '_'; + } +Index: sword-1.5.9/src/modules/filters/greeklexattribs.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/greeklexattribs.cpp 2006-11-25 12:37:37.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/greeklexattribs.cpp 2006-11-25 12:37:50.000000000 +0000 +@@ -29,7 +29,7 @@ + string freq; + char val[128], *valto; + char wordstr[7]; +- const char *currentPhrase = 0, *ch = 0; ++ const char *currentPhrase = 0; + const char *currentPhraseEnd = 0; + int number = 0; + +Index: sword-1.5.9/src/modules/filters/latin1utf16.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/latin1utf16.cpp 2006-11-25 12:15:59.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/latin1utf16.cpp 2006-11-25 12:16:06.000000000 +0000 +@@ -18,7 +18,6 @@ + + char Latin1UTF16::processText(SWBuf &text, const SWKey *key, const SWModule *module) { + const unsigned char *from; +- int len; + if ((unsigned long)key < 2) // hack, we're en(1)/de(0)ciphering + return (char)-1; + +Index: sword-1.5.9/src/modules/filters/osishtmlhref.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/osishtmlhref.cpp 2006-11-25 12:17:56.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/osishtmlhref.cpp 2006-11-25 12:19:37.000000000 +0000 +@@ -114,19 +114,19 @@ + + const char *attrib; + const char *val; +- if (attrib = tag.getAttribute("xlit")) { ++ if ((attrib = tag.getAttribute("xlit"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + outText(" ", buf, u); + outText(val, buf, u); + } +- if (attrib = tag.getAttribute("gloss")) { ++ if ((attrib = tag.getAttribute("gloss"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + outText(" ", buf, u); + outText(val, buf, u); + } +- if (attrib = tag.getAttribute("lemma")) { ++ if ((attrib = tag.getAttribute("lemma"))) { + int count = tag.getAttributePartCount("lemma", ' '); + int i = (count > 1) ? 0 : -1; // -1 for whole value cuz it's faster, but does the same thing as 0 + do { +@@ -155,7 +155,7 @@ + + } while (++i < count); + } +- if (attrib = tag.getAttribute("morph")) { // && (show)) { ++ if ((attrib = tag.getAttribute("morph"))) { // && (show)) { + SWBuf savelemma = tag.getAttribute("savlm"); + //if ((strstr(savelemma.c_str(), "3588")) && (lastText.length() < 1)) + // show = false; +@@ -179,7 +179,7 @@ + } while (++i < count); + //} + } +- if (attrib = tag.getAttribute("POS")) { ++ if ((attrib = tag.getAttribute("POS"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + outText(" ", buf, u); +@@ -204,7 +204,7 @@ + + if (!strongsMarkup) { // leave strong's markup notes out, in the future we'll probably have different option filters to turn different note types on or off + SWBuf footnoteNumber = tag.getAttribute("swordFootnote"); +- VerseKey *vkey; ++ VerseKey *vkey = NULL; + // see if we have a VerseKey * or descendant + SWTRY { + vkey = SWDYNAMIC_CAST(VerseKey, u->key); +@@ -341,7 +341,7 @@ + outText(firstChar, buf, u); + outText("", buf, u); + +- for(int i=0;i", buf, u); + } +Index: sword-1.5.9/src/modules/filters/osisredletterwords.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/osisredletterwords.cpp 2006-11-25 12:24:54.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/osisredletterwords.cpp 2006-11-25 12:25:04.000000000 +0000 +@@ -33,7 +33,6 @@ + + SWBuf token; + bool intoken = false; +- char buf[254]; + + SWBuf orig = text; + const char *from = orig.c_str(); +Index: sword-1.5.9/src/modules/filters/osisrtf.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/osisrtf.cpp 2006-11-25 12:23:28.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/osisrtf.cpp 2006-11-25 12:24:35.000000000 +0000 +@@ -162,19 +162,19 @@ + + const char *attrib; + const char *val; +- if (attrib = tag.getAttribute("xlit")) { ++ if ((attrib = tag.getAttribute("xlit"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + scratch.setFormatted(" {\\fs15 <%s>}", val); + outText(scratch.c_str(), buf, u); + } +- if (attrib = tag.getAttribute("gloss")) { ++ if ((attrib = tag.getAttribute("gloss"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + scratch.setFormatted(" {\\fs15 <%s>}", val); + outText(scratch.c_str(), buf, u); + } +- if (attrib = tag.getAttribute("lemma")) { ++ if ((attrib = tag.getAttribute("lemma"))) { + int count = tag.getAttributePartCount("lemma", ' '); + int i = (count > 1) ? 0 : -1; // -1 for whole value cuz it's faster, but does the same thing as 0 + do { +@@ -213,7 +213,7 @@ + } while (++i < count); + } + } +- if (attrib = tag.getAttribute("POS")) { ++ if ((attrib = tag.getAttribute("POS"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + scratch.setFormatted(" {\\fs15 <%s>}", val); +@@ -235,7 +235,7 @@ + && (type != "strongsMarkup") // deprecated + ) { + SWBuf footnoteNumber = tag.getAttribute("swordFootnote"); +- VerseKey *vkey; ++ VerseKey *vkey = NULL; + // see if we have a VerseKey * or descendant + SWTRY { + vkey = SWDYNAMIC_CAST(VerseKey, u->key); +Index: sword-1.5.9/src/modules/filters/osisscripref.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/osisscripref.cpp 2006-11-25 12:25:18.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/osisscripref.cpp 2006-11-25 12:25:25.000000000 +0000 +@@ -33,9 +33,6 @@ + bool hide = false; + SWBuf tagText; + XMLTag startTag; +- int tagTextNum = 1; +- int footnoteNum = 1; +- char buf[254]; + + SWBuf orig = text; + const char *from = orig.c_str(); +Index: sword-1.5.9/src/modules/filters/osisstrongs.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/osisstrongs.cpp 2006-11-25 12:21:41.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/osisstrongs.cpp 2006-11-25 12:22:57.000000000 +0000 +@@ -38,8 +38,6 @@ + bool lastspace = false; + int wordNum = 1; + char wordstr[5]; +- char *valto; +- char *ch; + const char *wordStart = 0; + + const SWBuf orig = text; +@@ -72,9 +70,8 @@ + SWBuf lemmaClass = ""; + + const char *attrib; +- const char *val; + sprintf(wordstr, "%03d", wordNum); +- if (attrib = wtag.getAttribute("morph")) { ++ if ((attrib = wtag.getAttribute("morph"))) { + int count = wtag.getAttributePartCount("morph", ' '); + int i = (count > 1) ? 0 : -1; // -1 for whole value cuz it's faster, but does the same thing as 0 + do { +@@ -106,7 +103,7 @@ + } while (++i < count); + } + +- if (attrib = wtag.getAttribute("lemma")) { ++ if ((attrib = wtag.getAttribute("lemma"))) { + int count = wtag.getAttributePartCount("lemma", ' '); + int i = (count > 1) ? 0 : -1; // -1 for whole value cuz it's faster, but does the same thing as 0 + do { +@@ -147,7 +144,7 @@ + module->getEntryAttributes()["Word"][wordstr]["PartCount"].setFormatted("%d", count); + } + +- if (attrib = wtag.getAttribute("src")) { ++ if ((attrib = wtag.getAttribute("src"))) { + int count = wtag.getAttributePartCount("src", ' '); + int i = (count > 1) ? 0 : -1; // -1 for whole value cuz it's faster, but does the same thing as 0 + do { +Index: sword-1.5.9/src/modules/filters/osisvariants.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/osisvariants.cpp 2006-11-25 12:25:40.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/osisvariants.cpp 2006-11-25 12:26:14.000000000 +0000 +@@ -62,7 +62,7 @@ + const char *from = orig.c_str(); + + //we use a fixed comparision string to make sure the loop is as fast as the original two blocks with almost the same code +- const char* variantCompareString = (option == 0) ? "div type=\"variant\" class=\"1\"" : "div type=\"variant\" class=\"2\""; ++ //const char* variantCompareString = (option == 0) ? "div type=\"variant\" class=\"1\"" : "div type=\"variant\" class=\"2\""; + + for (text = ""; *from; from++) { + if (*from == '<') { +Index: sword-1.5.9/src/modules/filters/osiswebif.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/osiswebif.cpp 2006-11-25 12:20:00.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/osiswebif.cpp 2006-11-25 12:21:25.000000000 +0000 +@@ -69,17 +69,17 @@ + + const char *attrib; + const char *val; +- if (attrib = tag.getAttribute("xlit")) { ++ if ((attrib = tag.getAttribute("xlit"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + // buf.appendFormatted(" %s", val); + } +- if (attrib = tag.getAttribute("gloss")) { ++ if ((attrib = tag.getAttribute("gloss"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + buf.appendFormatted(" %s", val); + } +- if (attrib = tag.getAttribute("lemma")) { ++ if ((attrib = tag.getAttribute("lemma"))) { + int count = tag.getAttributePartCount("lemma", ' '); + int i = (count > 1) ? 0 : -1; // -1 for whole value cuz it's faster, but does the same thing as 0 + do { +@@ -114,7 +114,7 @@ + } while (++i < count); + } + } +- if (attrib = tag.getAttribute("POS")) { ++ if ((attrib = tag.getAttribute("POS"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + buf.appendFormatted(" %s", val); +@@ -138,7 +138,7 @@ + if (!strongsMarkup) { // leave strong's markup notes out, in the future we'll probably have different option filters to turn different note types on or off + SWBuf footnoteNumber = tag.getAttribute("swordFootnote"); + SWBuf modName = (u->module) ? u->module->Name() : ""; +- VerseKey *vkey; ++ VerseKey *vkey = NULL; + // see if we have a VerseKey * or descendant + SWTRY { + vkey = SWDYNAMIC_CAST(VerseKey, u->key); +Index: sword-1.5.9/src/modules/filters/osiswordjs.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/osiswordjs.cpp 2006-11-25 12:26:29.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/osiswordjs.cpp 2006-11-25 12:27:19.000000000 +0000 +@@ -47,9 +47,6 @@ + bool lastspace = false; + int wordNum = 1; + char wordstr[5]; +- char val[128]; +- char *valto; +- char *ch; + SWBuf modName = (module)?module->Name():""; + // add TR to w src in KJV then remove this next line + SWBuf wordSrcPrefix = (modName == "KJV")?SWBuf("TR"):modName; +@@ -143,7 +140,7 @@ + } + wordID.appendFormatted("_%s", src.c_str()); + // clean up our word ID for XHTML +- for (int i = 0; i < wordID.size(); i++) { ++ for (unsigned int i = 0; i < wordID.size(); i++) { + if ((!isdigit(wordID[i])) && (!isalpha(wordID[i]))) { + wordID[i] = '_'; + } +Index: sword-1.5.9/src/modules/filters/teiplain.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/teiplain.cpp 2006-11-25 12:38:04.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/teiplain.cpp 2006-11-25 12:38:56.000000000 +0000 +@@ -42,7 +42,7 @@ + bool TEIPlain::handleToken(SWBuf &buf, const char *token, BasicFilterUserData *userData) { + // manually process if it wasn't a simple substitution + if (!substituteToken(buf, token)) { +- MyUserData *u = (MyUserData *)userData; ++ //MyUserData *u = (MyUserData *)userData; + XMLTag tag(token); + + //

paragraph tag +Index: sword-1.5.9/src/modules/filters/teirtf.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/teirtf.cpp 2006-11-25 12:38:34.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/teirtf.cpp 2006-11-25 12:38:48.000000000 +0000 +@@ -54,7 +54,7 @@ + bool TEIRTF::handleToken(SWBuf &buf, const char *token, BasicFilterUserData *userData) { + // manually process if it wasn't a simple substitution + if (!substituteToken(buf, token)) { +- MyUserData *u = (MyUserData *)userData; ++ //MyUserData *u = (MyUserData *)userData; + XMLTag tag(token); + + //

paragraph tag +Index: sword-1.5.9/src/modules/filters/thmlgbf.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/thmlgbf.cpp 2006-11-25 12:32:12.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/thmlgbf.cpp 2006-11-25 12:32:19.000000000 +0000 +@@ -31,7 +31,6 @@ + char token[2048]; + int tokpos = 0; + bool intoken = false; +- int len; + bool ampersand = false; + bool sechead = false; + bool title = false; +Index: sword-1.5.9/src/modules/filters/thmlhtmlhref.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/thmlhtmlhref.cpp 2006-11-25 12:33:24.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/thmlhtmlhref.cpp 2006-11-25 12:33:54.000000000 +0000 +@@ -45,7 +45,6 @@ + + + bool ThMLHTMLHREF::handleToken(SWBuf &buf, const char *token, BasicFilterUserData *userData) { +- const char *tok; + if (!substituteToken(buf, token)) { // manually process if it wasn't a simple substitution + MyUserData *u = (MyUserData *)userData; + +@@ -88,7 +87,7 @@ + if (!tag.isEmpty()) { + SWBuf type = tag.getAttribute("type"); + SWBuf footnoteNumber = tag.getAttribute("swordFootnote"); +- VerseKey *vkey; ++ VerseKey *vkey = NULL; + // see if we have a VerseKey * or descendant + SWTRY { + vkey = SWDYNAMIC_CAST(VerseKey, u->key); +@@ -133,7 +132,7 @@ + } + else { + SWBuf footnoteNumber = u->startTag.getAttribute("swordFootnote"); +- VerseKey *vkey; ++ VerseKey *vkey = NULL; + // see if we have a VerseKey * or descendant + SWTRY { + vkey = SWDYNAMIC_CAST(VerseKey, u->key); +Index: sword-1.5.9/src/modules/filters/thmlosis.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/thmlosis.cpp 2006-11-25 12:36:53.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/thmlosis.cpp 2006-11-25 12:37:16.000000000 +0000 +@@ -36,17 +36,16 @@ + // static QuoteStack quoteStack; + + bool lastspace = false; +- int word = 1; + char val[128]; + SWBuf buf; + char *valto; + char *ch; + + const char *wordStart = text.c_str(); +- const char *wordEnd; ++ const char *wordEnd = NULL; + +- const char *textStart; +- const char *textEnd; ++ const char *textStart = NULL; ++ const char *textEnd = NULL; + + bool suspendTextPassThru = false; + bool handled = false; +Index: sword-1.5.9/src/modules/filters/thmlrtf.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/thmlrtf.cpp 2006-11-25 12:32:32.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/thmlrtf.cpp 2006-11-25 12:33:03.000000000 +0000 +@@ -205,7 +205,6 @@ + + + bool ThMLRTF::handleToken(SWBuf &buf, const char *token, BasicFilterUserData *userData) { +- const char *tok; + if (!substituteToken(buf, token)) { // manually process if it wasn't a simple substitution + MyUserData *u = (MyUserData *)userData; + XMLTag tag(token); +@@ -238,7 +237,7 @@ + if (!tag.isEmpty()) { + SWBuf type = tag.getAttribute("type"); + SWBuf footnoteNumber = tag.getAttribute("swordFootnote"); +- VerseKey *vkey; ++ VerseKey *vkey = NULL; + // see if we have a VerseKey * or descendant + SWTRY { + vkey = SWDYNAMIC_CAST(VerseKey, u->key); +@@ -277,7 +276,7 @@ + } + else { + SWBuf footnoteNumber = u->startTag.getAttribute("swordFootnote"); +- VerseKey *vkey; ++ VerseKey *vkey = NULL; + // see if we have a VerseKey * or descendant + SWTRY { + vkey = SWDYNAMIC_CAST(VerseKey, u->key); +Index: sword-1.5.9/src/modules/filters/thmlstrongs.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/thmlstrongs.cpp 2006-11-25 12:31:42.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/thmlstrongs.cpp 2006-11-25 12:31:47.000000000 +0000 +@@ -34,7 +34,6 @@ + const char *from; + int tokpos = 0; + bool intoken = false; +- int len; + bool lastspace = false; + int word = 1; + char val[128]; +Index: sword-1.5.9/src/modules/filters/thmlwebif.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/thmlwebif.cpp 2006-11-25 12:34:07.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/thmlwebif.cpp 2006-11-25 12:34:17.000000000 +0000 +@@ -28,7 +28,6 @@ + } + + bool ThMLWEBIF::handleToken(SWBuf &buf, const char *token, BasicFilterUserData *userData) { +- const char *tok; + + if (!substituteToken(buf, token)) { // manually process if it wasn't a simple substitution + MyUserData *u = (MyUserData *)userData; +Index: sword-1.5.9/src/modules/filters/thmlwordjs.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/thmlwordjs.cpp 2006-11-25 12:34:28.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/thmlwordjs.cpp 2006-11-25 12:35:05.000000000 +0000 +@@ -50,7 +50,6 @@ + char *ch; + char wordstr[5]; + unsigned int textStart = 0, lastAppendLen = 0, textEnd = 0; +- char gh = 0; + SWBuf tmp; + bool newText = false; + bool needWordOut = false; +@@ -179,7 +178,7 @@ + else { + wordID = key->getText(); + } +- for (int i = 0; i < wordID.size(); i++) { ++ for (unsigned int i = 0; i < wordID.size(); i++) { + if ((!isdigit(wordID[i])) && (!isalpha(wordID[i]))) { + wordID[i] = '_'; + } +@@ -271,7 +270,7 @@ + else { + wordID = key->getText(); + } +- for (int i = 0; i < wordID.size(); i++) { ++ for (unsigned int i = 0; i < wordID.size(); i++) { + if ((!isdigit(wordID[i])) && (!isalpha(wordID[i]))) { + wordID[i] = '_'; + } +Index: sword-1.5.9/src/modules/filters/utf8html.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/utf8html.cpp 2006-11-25 12:17:04.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/utf8html.cpp 2006-11-25 12:17:35.000000000 +0000 +@@ -59,7 +59,7 @@ + from += subsequent; + text += '&'; + text += '#'; +- sprintf(digit, "%d", ch); ++ sprintf(digit, "%ld", ch); + for (char *dig = digit; *dig; dig++) + text += *dig; + text += ';'; +Index: sword-1.5.9/src/modules/filters/utf8utf16.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/filters/utf8utf16.cpp 2006-11-25 12:16:34.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/utf8utf16.cpp 2006-11-25 12:16:44.000000000 +0000 +@@ -17,7 +17,6 @@ + + char UTF8UTF16::processText(SWBuf &text, const SWKey *key, const SWModule *module) { + const unsigned char *from; +- char digit[10]; + unsigned long ch; + signed short utf16; + unsigned char from2[7]; +Index: sword-1.5.9/src/modules/swmodule.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/swmodule.cpp 2006-11-25 12:11:17.000000000 +0000 ++++ sword-1.5.9/src/modules/swmodule.cpp 2006-11-25 12:11:32.000000000 +0000 +@@ -680,7 +680,6 @@ + + // entry attributes + else if (searchType == -3) { +- int i; + RenderText(); // force parse + AttributeTypeList &entryAttribs = getEntryAttributes(); + AttributeTypeList::iterator i1Start, i1End; +Index: sword-1.5.9/src/modules/texts/swtext.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/texts/swtext.cpp 2006-11-25 12:39:28.000000000 +0000 ++++ sword-1.5.9/src/modules/texts/swtext.cpp 2006-11-25 12:39:44.000000000 +0000 +@@ -82,7 +82,7 @@ + + + VerseKey &SWText::getVerseKey() const { +- VerseKey *key; ++ VerseKey *key = NULL; + // see if we have a VerseKey * or decendant + SWTRY { + key = SWDYNAMIC_CAST(VerseKey, this->key); +Index: sword-1.5.9/src/modules/comments/rawfiles/rawfiles.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/comments/rawfiles/rawfiles.cpp 2006-11-25 12:40:48.000000000 +0000 ++++ sword-1.5.9/src/modules/comments/rawfiles/rawfiles.cpp 2006-11-25 12:41:09.000000000 +0000 +@@ -57,7 +57,6 @@ + FileDesc *datafile; + long start = 0; + unsigned short size = 0; +- char *tmpbuf; + VerseKey *key = 0; + + SWTRY { +@@ -155,7 +154,6 @@ + + long start; + unsigned short size; +- char *tmpbuf; + const VerseKey *key = 0; + + SWTRY { --- sword-1.5.11.orig/debian/patches/series +++ sword-1.5.11/debian/patches/series @@ -0,0 +1,2 @@ +02_libver.diff +10_diatheke.diff --- sword-1.5.11.orig/debian/patches/02_libver.diff +++ sword-1.5.11/debian/patches/02_libver.diff @@ -0,0 +1,28 @@ +This patch changes the upsteam SO name to Debian/Ubuntu SO name. + +Index: sword-1.5.11/lib/Makefile.am +=================================================================== +--- sword-1.5.11.orig/lib/Makefile.am 2007-09-01 11:16:04.000000000 +0100 ++++ sword-1.5.11/lib/Makefile.am 2007-09-01 11:17:05.000000000 +0100 +@@ -36,7 +36,7 @@ + endif + + +-libsword_la_LDFLAGS = -release $(VERSION) ++libsword_la_LDFLAGS = -version-info 7 + + include ../src/keys/Makefile.am + include ../src/utilfuns/Makefile.am +Index: sword-1.5.11/lib/Makefile.in +=================================================================== +--- sword-1.5.11.orig/lib/Makefile.in 2007-09-01 11:16:04.000000000 +0100 ++++ sword-1.5.11/lib/Makefile.in 2007-09-01 11:18:27.000000000 +0100 +@@ -436,7 +436,7 @@ + #if WITHCURL + @INSTALLMGR_TRUE@IMGRLIBADD = -lcurl $(CURL_LIBS) + libsword_la_LIBADD = $(ICULIBADD) $(IMGRLIBADD) $(CLUCENE_LIBS) +-libsword_la_LDFLAGS = -release $(VERSION) ++libsword_la_LDFLAGS = -version-info 7 + keysdir = $(top_srcdir)/src/keys + utilfunsdir = $(top_srcdir)/src/utilfuns + @INTERNALFTPLIB_FALSE@ftpsrc = --- sword-1.5.11.orig/debian/patches/01_sword_c++.diff +++ sword-1.5.11/debian/patches/01_sword_c++.diff @@ -0,0 +1,11 @@ +--- sword-1.5.9.orig/include/flatapi.h ++++ sword-1.5.9/include/flatapi.h +@@ -29,7 +29,7 @@ + + extern "C" { + +-#define SWHANDLE long ++#define SWHANDLE intptr_t + + + //----------------------------------------------------------------- --- sword-1.5.11.orig/debian/patches/05_getline.diff +++ sword-1.5.11/debian/patches/05_getline.diff @@ -0,0 +1,13 @@ +Index: sword-1.5.9/src/utilfuns/swbuf.cpp +=================================================================== +--- sword-1.5.9.orig/src/utilfuns/swbuf.cpp 2006-12-08 15:51:36.000000000 +0000 ++++ sword-1.5.9/src/utilfuns/swbuf.cpp 2006-12-08 15:52:19.000000000 +0000 +@@ -98,7 +98,7 @@ + if (max < 0) + max = strlen(str); + assureMore(max+1); +- for (;((*str)&&(max));max--) ++ for (;((max)&&(*str));max--) + *end++ = *str++; + *end = 0; + } --- sword-1.5.11.orig/debian/patches/08_gcc_43.diff +++ sword-1.5.11/debian/patches/08_gcc_43.diff @@ -0,0 +1,77 @@ +--- sword-1.5.9.orig/include/flatapi.h 2007-04-04 11:52:31.000000000 +0000 ++++ sword-1.5.9/include/flatapi.h 2007-04-04 11:53:30.000000000 +0000 +@@ -27,6 +27,8 @@ + #ifdef __cplusplus + #endif + ++#include ++ + extern "C" { + + #define SWHANDLE intptr_t +--- sword-1.5.9.orig/src/modules/filters/gbfwordjs.cpp 2007-04-04 11:49:30.000000000 +0000 ++++ sword-1.5.9/src/modules/filters/gbfwordjs.cpp 2007-04-04 11:49:45.000000000 +0000 +@@ -8,6 +8,7 @@ + #include + #include + #include ++#include + #include + #include + #include +--- sword-1.5.9.orig/utilities/diatheke/corediatheke.h 2007-04-04 11:54:34.000000000 +0000 ++++ sword-1.5.9/utilities/diatheke/corediatheke.h 2007-04-04 11:54:42.000000000 +0000 +@@ -4,6 +4,7 @@ + // see accompanying LICENSE file for license details + + #include ++#include + + #include "diathekemgr.h" + #include +--- sword-1.5.9.orig/utilities/diatheke/osiscgi.cpp 2007-04-04 11:56:04.000000000 +0000 ++++ sword-1.5.9/utilities/diatheke/osiscgi.cpp 2007-04-04 11:56:16.000000000 +0000 +@@ -14,6 +14,7 @@ + * * + ***************************************************************************/ + ++#include + #include + #include "osiscgi.h" + #include +--- sword-1.5.9.orig/utilities/stepdump.cpp 2007-04-04 12:01:41.000000000 +0000 ++++ sword-1.5.9/utilities/stepdump.cpp 2007-04-04 12:01:49.000000000 +0000 +@@ -1,3 +1,4 @@ ++#include + #include + #include + +--- sword-1.5.9.orig/utilities/step2vpl.cpp 2007-04-04 12:02:47.000000000 +0000 ++++ sword-1.5.9/utilities/step2vpl.cpp 2007-04-04 12:02:52.000000000 +0000 +@@ -1,3 +1,4 @@ ++#include + #include + #include + #include + + +diff -urNad sword-1.5.9.orig/utilities/step2vpl.cpp sword-1.5.9/utilities/step2vpl.cpp +--- sword-1.5.9.orig/utilities/step2vpl.cpp 2008-04-10 02:11:24.000000000 +0100 ++++ sword-1.5.9/utilities/step2vpl.cpp 2008-04-10 02:14:03.000000000 +0100 +@@ -1,5 +1,6 @@ + #include + #include ++#include + #include + + #include +diff -urNad sword-1.5.9.orig/utilities/stepdump.cpp sword-1.5.9/utilities/stepdump.cpp +--- sword-1.5.9.orig/utilities/stepdump.cpp 2008-04-10 02:11:24.000000000 +0100 ++++ sword-1.5.9/utilities/stepdump.cpp 2008-04-10 02:12:49.000000000 +0100 +@@ -1,5 +1,6 @@ + #include + #include ++#include + + #include + --- sword-1.5.11.orig/debian/patches/04_ziplock.diff +++ sword-1.5.11/debian/patches/04_ziplock.diff @@ -0,0 +1,89 @@ +Index: sword-1.5.9/src/modules/common/zverse.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/common/zverse.cpp 2005-11-20 06:06:40.000000000 +0000 ++++ sword-1.5.9/src/modules/common/zverse.cpp 2006-12-08 14:10:02.000000000 +0000 +@@ -257,13 +257,12 @@ + + void zVerse::zReadText(char testmt, long start, unsigned short size, SWBuf &inBuf) { + inBuf = ""; +- inBuf.setFillByte(0); +- inBuf.setSize(size+1); +- if (size > 0) { +- if (cacheBuf) +- strncpy(inBuf.getRawData(), &(cacheBuf[start]), size); ++ if ( (size > 0) && cacheBuf && ((unsigned)(start+size) <= strlen(cacheBuf)) ){ //TODO: optimize this, remove strlen ++ inBuf.setFillByte(0); ++ inBuf.setSize(size+1); ++ strncpy(inBuf.getRawData(), &(cacheBuf[start]), size); ++ inBuf.setSize(strlen(inBuf.c_str())); + } +- inBuf.setSize(strlen(inBuf.c_str())); + } + + +Index: sword-1.5.9/src/modules/common/zipcomprs.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/common/zipcomprs.cpp 2003-06-27 02:41:08.000000000 +0100 ++++ sword-1.5.9/src/modules/common/zipcomprs.cpp 2006-12-08 13:14:15.000000000 +0000 +@@ -79,7 +79,7 @@ + if (len) + { + //printf("Doing compress\n"); +- if (compress((Bytef*)zbuf, &zlen, (const Bytef*)buf, len)!=Z_OK) ++ if (compress((Bytef*)zbuf, &zlen, (const Bytef*)buf, len) != Z_OK) + { + printf("ERROR in compression\n"); + } +@@ -89,7 +89,7 @@ + } + else + { +- fprintf(stderr, "No buffer to compress\n"); ++ fprintf(stderr, "ERROR: no buffer to compress\n"); + } + delete [] zbuf; + free (buf); +@@ -144,15 +144,18 @@ + unsigned long blen = zlen*20; // trust compression is less than 1000% + char *buf = new char[blen]; + //printf("Doing decompress {%s}\n", zbuf); +- if (uncompress((Bytef*)buf, &blen, (Bytef*)zbuf, zlen) != Z_OK) { +- fprintf(stderr, "no room in outbuffer to during decompression. see zipcomp.cpp\n"); ++ slen = 0; ++ switch (uncompress((Bytef*)buf, &blen, (Bytef*)zbuf, zlen)){ ++ case Z_OK: SendChars(buf, blen); slen = blen; break; ++ case Z_MEM_ERROR: fprintf(stderr, "ERROR: not enough memory during decompression.\n"); break; ++ case Z_BUF_ERROR: fprintf(stderr, "ERROR: not enough room in the out buffer during decompression.\n"); break; ++ case Z_DATA_ERROR: fprintf(stderr, "ERROR: corrupt data during decompression.\n"); break; ++ default: fprintf(stderr, "ERROR: an unknown error occured during decompression.\n"); break; + } +- SendChars(buf, blen); + delete [] buf; +- slen = blen; + } + else { +- fprintf(stderr, "No buffer to decompress!\n"); ++ fprintf(stderr, "ERROR: no buffer to decompress!\n"); + } + //printf("Finished decoding\n"); + free (zbuf); +Index: sword-1.5.9/src/modules/common/entriesblk.cpp +=================================================================== +--- sword-1.5.9.orig/src/modules/common/entriesblk.cpp 2006-12-08 14:10:16.000000000 +0000 ++++ sword-1.5.9/src/modules/common/entriesblk.cpp 2006-12-08 14:10:38.000000000 +0000 +@@ -10,8 +10,13 @@ + // offset(4); size(4); + + EntriesBlock::EntriesBlock(const char *iBlock, unsigned long size) { +- block = (char *)calloc(1, size); +- memcpy(block, iBlock, size); ++ if (size) { ++ block = (char *)calloc(1, size); ++ memcpy(block, iBlock, size); ++ } ++ else { ++ block = (char *)calloc(1, sizeof(__u32)); ++ } + } + + --- sword-1.5.11.orig/debian/patches/10_diatheke.diff +++ sword-1.5.11/debian/patches/10_diatheke.diff @@ -0,0 +1,16 @@ +This patch simplifies the $range assignment. + +Index: sword-1.5.9/utilities/diatheke/cgi/diatheke.pl +=================================================================== +--- sword-1.5.9.orig/utilities/diatheke/cgi/diatheke.pl 2008-02-18 22:10:09.000000000 +0000 ++++ sword-1.5.9/utilities/diatheke/cgi/diatheke.pl 2008-02-18 22:30:25.000000000 +0000 +@@ -110,8 +110,7 @@ + $range = $mydata; + $range =~ tr/+/ /; + $range =~ s/%([a-fA-F0-9][a-fA-F0-9])/pack("C", hex($1))/eg; +- $range = "-r \"$range\""; +- $range = shell_escape($range); ++ $range = "-r '" . shell_escape($range) . "'"; + } + + elsif ($varname eq "strongs") { --- sword-1.5.11.orig/debian/patches/09_pcfile.diff +++ sword-1.5.11/debian/patches/09_pcfile.diff @@ -0,0 +1,13 @@ +don't link frontends against libs unneccessarily +Index: sword-1.5.9/sword.pc.in +=================================================================== +--- sword-1.5.9.orig/sword.pc.in 2007-08-31 19:21:59.000000000 +0100 ++++ sword-1.5.9/sword.pc.in 2007-08-31 19:22:09.000000000 +0100 +@@ -7,6 +7,6 @@ + Name: SWORD + Description: Biblical Text Engine + Version: @VERSION@ +-Libs: -L${libdir} -lsword -lz @CURL_LIBS@ @CLUCENE_LIBS@ @ICU_LIBS@ @ICU_IOLIBS@ ++Libs: -L${libdir} -lsword + Cflags: -I${includedir}/sword + --- sword-1.5.11.orig/debian/patches/07_warn_tools.diff +++ sword-1.5.11/debian/patches/07_warn_tools.diff @@ -0,0 +1,193 @@ +Index: sword-1.5.9/utilities/cipherraw.cpp +=================================================================== +--- sword-1.5.9.orig/utilities/cipherraw.cpp 2006-11-25 13:18:10.000000000 +0000 ++++ sword-1.5.9/utilities/cipherraw.cpp 2006-11-25 13:18:53.000000000 +0000 +@@ -65,10 +65,10 @@ + key.Headings(1); + for (key.Index(0); (!key.Error()); key++) { + rawdrv->findOffset(key.Testament(), key.Index(), &offset, &size); +- printf("%s: OLD offset: %d; size: %d\n", (const char *)key, offset, size); ++ printf("%s: OLD offset: %ld; size: %d\n", (const char *)key, offset, size); + + if ((offset == loffset) && (size == lsize)) { +- printf("using previous offset,size\n", size); ++ printf("using previous offset,size %d\n", size); + offset = lseek(oxfd[key.Testament() - 1], 0, SEEK_CUR); + printf("%ld %ld %d \n", offset, lzoffset, lzsize); + write(oxfd[key.Testament() - 1], &lzoffset, 4); +Index: sword-1.5.9/utilities/diatheke/osiscgi.cpp +=================================================================== +--- sword-1.5.9.orig/utilities/diatheke/osiscgi.cpp 2006-11-25 13:09:51.000000000 +0000 ++++ sword-1.5.9/utilities/diatheke/osiscgi.cpp 2006-11-25 13:11:07.000000000 +0000 +@@ -80,17 +80,17 @@ + + const char *attrib; + const char *val; +- if (attrib = tag.getAttribute("xlit")) { ++ if ((attrib = tag.getAttribute("xlit"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + buf.appendFormatted(" %s", val); + } +- if (attrib = tag.getAttribute("gloss")) { ++ if ((attrib = tag.getAttribute("gloss"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + buf.appendFormatted(" %s", val); + } +- if (attrib = tag.getAttribute("lemma")) { ++ if ((attrib = tag.getAttribute("lemma"))) { + int count = tag.getAttributePartCount("lemma"); + int i = (count > 1) ? 0 : -1; // -1 for whole value cuz it's faster, but does the same thing as 0 + do { +@@ -140,7 +140,7 @@ + } while (++i < count); + } + } +- if (attrib = tag.getAttribute("POS")) { ++ if ((attrib = tag.getAttribute("POS"))) { + val = strchr(attrib, ':'); + val = (val) ? (val + 1) : attrib; + buf.appendFormatted(" %s", val); +@@ -160,7 +160,7 @@ + if (type != "x-strongsMarkup" && // leave strong's markup notes out, in the future we'll probably have different option filters to turn different note types on or off + type != "strongsMarkup") { // deprecated + SWBuf footnoteNumber = tag.getAttribute("swordFootnote"); +- VerseKey *vkey; ++ VerseKey *vkey = NULL; + // see if we have a VerseKey * or descendant + SWTRY { + vkey = SWDYNAMIC_CAST(VerseKey, u->key); +@@ -201,7 +201,7 @@ + + if ((!tag.isEndTag()) && (!tag.isEmpty())) { + buf += " conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -1610,7 +1581,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -1619,7 +1590,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -2327,7 +2298,7 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-freebsd* | kfreebsd*-gnu | dragonfly*) ++freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) +@@ -2381,11 +2352,11 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) ++netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else +@@ -3133,7 +3104,7 @@ + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes +@@ -3292,7 +3263,7 @@ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler +@@ -3394,7 +3365,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= +@@ -4659,7 +4630,7 @@ + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +-linux*) ++linux* | k*bsd*-gnu) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +@@ -4932,7 +4903,7 @@ + ;; + esac + ;; +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) +@@ -4975,7 +4946,7 @@ + ;; + esac + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler +@@ -5018,7 +4989,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in +@@ -5229,7 +5200,7 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +@@ -5370,6 +5341,9 @@ + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; ++ linux* | k*bsd*-gnu) ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no ++ ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; +@@ -5540,7 +5514,7 @@ + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in +@@ -5566,12 +5540,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -5901,7 +5876,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes +@@ -6003,7 +5978,7 @@ + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -7283,4 +7258,5 @@ + AC_SUBST([am__untar]) + ]) # _AM_PROG_TAR + ++m4_include([m4/acx_clucene.m4]) + m4_include([m4/cppunit.m4]) +Index: sword-1.5.9/configure +=================================================================== +--- sword-1.5.9.orig/configure 2006-09-21 10:53:51.000000000 +0100 ++++ sword-1.5.9/configure 2006-11-23 11:32:55.000000000 +0000 +@@ -1,11 +1,12 @@ + #! /bin/sh + # From configure.ac Revision: 1.45 . + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.59 for sword 1.5.9. ++# Generated by GNU Autoconf 2.60a for sword 1.5.9. + # + # Report bugs to . + # +-# Copyright (C) 2003 Free Software Foundation, Inc. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## +@@ -19,11 +20,35 @@ + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 + DUALCASE=1; export DUALCASE # for MKS sh + ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +@@ -32,8 +57,43 @@ + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -47,18 +107,19 @@ + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -66,157 +127,386 @@ + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + ++# CDPATH. ++$as_unset CDPATH + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no + fi + ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ++for as_dir in /usr/bin/posix$PATH_SEPARATOR/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in ++ case $as_dir in + /*) +- if ("$as_dir/$as_base" -c ' ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++# Be Bourne compatible ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++# Be Bourne compatible ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || ++ chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -225,7 +515,19 @@ + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++# Find out whether ``test -x'' works. Don't use a zero-byte file, as ++# systems may use methods other than mode bits to determine executability. ++cat >conf$$.file <<_ASEOF ++#! /bin/sh ++exit 0 ++_ASEOF ++chmod +x conf$$.file ++if test -x conf$$.file >/dev/null 2>&1; then ++ as_executable_p="test -x" ++else ++ as_executable_p=: ++fi ++rm -f conf$$.file + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -234,15 +536,6 @@ + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- + + + # Check that we are running under the correct shell. +@@ -398,29 +691,26 @@ + + tagnames=${tagnames+${tagnames},}F77 + ++exec 7<&0 &1 ++ + # Name of the host. + # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +-exec 6>&1 +- + # + # Initializations. + # + ac_default_prefix=/usr/local ++ac_clean_files= + ac_config_libobj_dir=. ++LIBOBJS= + cross_compiling=no + subdirs= + MFLAGS= + MAKEFLAGS= + SHELL=${CONFIG_SHELL-/bin/sh} + +-# Maximum number of lines to put in a shell here document. +-# This variable seems obsolete. It should probably be removed, and +-# only ac_max_sed_lines should be used. +-: ${ac_max_here_lines=38} +- + # Identity of this package. + PACKAGE_NAME='sword' + PACKAGE_TARNAME='sword' +@@ -432,42 +722,224 @@ + # Factoring default headers for most tests. + ac_includes_default="\ + #include +-#if HAVE_SYS_TYPES_H ++#ifdef HAVE_SYS_TYPES_H + # include + #endif +-#if HAVE_SYS_STAT_H ++#ifdef HAVE_SYS_STAT_H + # include + #endif +-#if STDC_HEADERS ++#ifdef STDC_HEADERS + # include + # include + #else +-# if HAVE_STDLIB_H ++# ifdef HAVE_STDLIB_H + # include + # endif + #endif +-#if HAVE_STRING_H +-# if !STDC_HEADERS && HAVE_MEMORY_H ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H + # include + # endif + # include + #endif +-#if HAVE_STRINGS_H ++#ifdef HAVE_STRINGS_H + # include + #endif +-#if HAVE_INTTYPES_H ++#ifdef HAVE_INTTYPES_H + # include +-#else +-# if HAVE_STDINT_H +-# include +-# endif + #endif +-#if HAVE_UNISTD_H ++#ifdef HAVE_STDINT_H ++# include ++#endif ++#ifdef HAVE_UNISTD_H + # include + #endif" + +-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CPPUNIT_CONFIG CPPUNIT_CFLAGS CPPUNIT_LIBS HAVE_CPPUNIT_TRUE HAVE_CPPUNIT_FALSE PKG_CONFIG PKGDATA GENCCODE GENCMN GENRB ICU_CONFIG CURL_CONFIG with_zlib with_icu with_conf dir_confdef CURL_AM_CFLAGS CURL_LIBS LUCENE_LIBS ICU_LIBS ICU_IOLIBS ICU_VER XML_LIBS enable_debug enable_profile AM_CXXFLAGS target_system target_mingw32 MINGW_TRUE MINGW_FALSE ICU_TRUE ICU_FALSE USELUCENE_TRUE USELUCENE_FALSE ICUSWORD_TRUE ICUSWORD_FALSE ZLIB_TRUE ZLIB_FALSE INSTCONF_TRUE INSTCONF_FALSE INSTALLMGR_TRUE INSTALLMGR_FALSE WITHCURL_TRUE WITHCURL_FALSE INTERNALFTPLIB_TRUE INTERNALFTPLIB_FALSE CONFDEF_TRUE CONFDEF_FALSE USE_PKGCONF_TRUE USE_PKGCONF_FALSE BUILDTESTS_TRUE BUILDTESTS_FALSE BUILDUTILS_TRUE BUILDUTILS_FALSE BUILDEXAMPLES_TRUE BUILDEXAMPLES_FALSE LIBOBJS LTLIBOBJS' ++ac_subst_vars='SHELL ++PATH_SEPARATOR ++PACKAGE_NAME ++PACKAGE_TARNAME ++PACKAGE_VERSION ++PACKAGE_STRING ++PACKAGE_BUGREPORT ++exec_prefix ++prefix ++program_transform_name ++bindir ++sbindir ++libexecdir ++datarootdir ++datadir ++sysconfdir ++sharedstatedir ++localstatedir ++includedir ++oldincludedir ++docdir ++infodir ++htmldir ++dvidir ++pdfdir ++psdir ++libdir ++localedir ++mandir ++DEFS ++ECHO_C ++ECHO_N ++ECHO_T ++LIBS ++build_alias ++host_alias ++target_alias ++build ++build_cpu ++build_vendor ++build_os ++host ++host_cpu ++host_vendor ++host_os ++target ++target_cpu ++target_vendor ++target_os ++INSTALL_PROGRAM ++INSTALL_SCRIPT ++INSTALL_DATA ++CYGPATH_W ++PACKAGE ++VERSION ++ACLOCAL ++AUTOCONF ++AUTOMAKE ++AUTOHEADER ++MAKEINFO ++install_sh ++STRIP ++INSTALL_STRIP_PROGRAM ++mkdir_p ++AWK ++SET_MAKE ++am__leading_dot ++AMTAR ++am__tar ++am__untar ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++ac_ct_CC ++EXEEXT ++OBJEXT ++DEPDIR ++am__include ++am__quote ++AMDEP_TRUE ++AMDEP_FALSE ++AMDEPBACKSLASH ++CCDEPMODE ++am__fastdepCC_TRUE ++am__fastdepCC_FALSE ++CXX ++CXXFLAGS ++ac_ct_CXX ++CXXDEPMODE ++am__fastdepCXX_TRUE ++am__fastdepCXX_FALSE ++GREP ++EGREP ++LN_S ++ECHO ++AR ++RANLIB ++DLLTOOL ++AS ++OBJDUMP ++CPP ++CXXCPP ++F77 ++FFLAGS ++ac_ct_F77 ++LIBTOOL ++CLUCENE_LIBS ++CLUCENE_CXXFLAGS ++MAINTAINER_MODE_TRUE ++MAINTAINER_MODE_FALSE ++MAINT ++CPPUNIT_CONFIG ++CPPUNIT_CFLAGS ++CPPUNIT_LIBS ++HAVE_CPPUNIT_TRUE ++HAVE_CPPUNIT_FALSE ++PKG_CONFIG ++PKGDATA ++GENCCODE ++GENCMN ++GENRB ++ICU_CONFIG ++CURL_CONFIG ++with_zlib ++with_icu ++with_conf ++dir_confdef ++CURL_AM_CFLAGS ++CURL_LIBS ++ICU_LIBS ++ICU_IOLIBS ++ICU_VER ++XML_LIBS ++enable_debug ++enable_profile ++AM_CXXFLAGS ++target_system ++target_mingw32 ++MINGW_TRUE ++MINGW_FALSE ++ICU_TRUE ++ICU_FALSE ++USELUCENE_TRUE ++USELUCENE_FALSE ++ICUSWORD_TRUE ++ICUSWORD_FALSE ++ZLIB_TRUE ++ZLIB_FALSE ++INSTCONF_TRUE ++INSTCONF_FALSE ++INSTALLMGR_TRUE ++INSTALLMGR_FALSE ++WITHCURL_TRUE ++WITHCURL_FALSE ++INTERNALFTPLIB_TRUE ++INTERNALFTPLIB_FALSE ++CONFDEF_TRUE ++CONFDEF_FALSE ++USE_PKGCONF_TRUE ++USE_PKGCONF_FALSE ++BUILDTESTS_TRUE ++BUILDTESTS_FALSE ++BUILDUTILS_TRUE ++BUILDUTILS_FALSE ++BUILDEXAMPLES_TRUE ++BUILDEXAMPLES_FALSE ++LIBOBJS ++LTLIBOBJS' + ac_subst_files='' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++CXX ++CXXFLAGS ++CCC ++CPP ++CXXCPP ++F77 ++FFLAGS' ++ + + # Initialize some variables set by options. + ac_init_help= +@@ -494,34 +966,48 @@ + # and all the variables that are supposed to be based on exec_prefix + # by default will actually change. + # Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' +-datadir='${prefix}/share' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' + sysconfdir='${prefix}/etc' + sharedstatedir='${prefix}/com' + localstatedir='${prefix}/var' +-libdir='${exec_prefix}/lib' + includedir='${prefix}/include' + oldincludedir='/usr/include' +-infodir='${prefix}/info' +-mandir='${prefix}/man' ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' + + ac_prev= ++ac_dashdash= + for ac_option + do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then +- eval "$ac_prev=\$ac_option" ++ eval $ac_prev=\$ac_option + ac_prev= + continue + fi + +- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + +- case $ac_option in ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; +@@ -543,12 +1029,18 @@ + --config-cache | -C) + cache_file=config.cache ;; + +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ +- | --da=*) ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +@@ -556,7 +1048,17 @@ + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- eval "enable_$ac_feature=no" ;; ++ eval enable_$ac_feature=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` +@@ -565,11 +1067,7 @@ + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "enable_$ac_feature='$ac_optarg'" ;; ++ eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -596,6 +1094,12 @@ + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; +@@ -620,13 +1124,16 @@ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ + -localstatedir | --localstatedir | --localstatedi | --localstated \ +- | --localstate | --localstat | --localsta | --localst \ +- | --locals | --local | --loca | --loc | --lo) ++ | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) +@@ -691,6 +1198,16 @@ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; +@@ -747,11 +1264,7 @@ + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "with_$ac_package='$ac_optarg'" ;; ++ eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` +@@ -760,7 +1273,7 @@ + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` +- eval "with_$ac_package=no" ;; ++ eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. +@@ -791,8 +1304,7 @@ + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } +- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` +- eval "$ac_envvar='$ac_optarg'" ++ eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) +@@ -812,27 +1324,19 @@ + { (exit 1); exit 1; }; } + fi + +-# Be sure to have absolute paths. +-for ac_var in exec_prefix prefix +-do +- eval ac_val=$`echo $ac_var` +- case $ac_val in +- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; +- esac +-done +- +-# Be sure to have absolute paths. +-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ +- localstatedir libdir includedir oldincludedir infodir mandir ++# Be sure to have absolute directory names. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir + do +- eval ac_val=$`echo $ac_var` ++ eval ac_val=\$$ac_var + case $ac_val in +- [\\/$]* | ?:[\\/]* ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } + done + + # There might be people who depend on the old broken behavior: `$host' +@@ -859,94 +1363,76 @@ + test "$silent" = yes && exec 6>/dev/null + + ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { echo "$as_me: error: Working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes +- # Try the directory containing this script, then its parent. +- ac_confdir=`(dirname "$0") 2>/dev/null || ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$0" || + $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X"$0" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + srcdir=$ac_confdir +- if test ! -r $srcdir/$ac_unique_file; then ++ if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi + else + ac_srcdir_defaulted=no + fi +-if test ! -r $srcdir/$ac_unique_file; then +- if test "$ac_srcdir_defaulted" = yes; then +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +- else +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 +- { (exit 1); exit 1; }; } +- fi + fi +-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || +- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } +-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +-ac_env_build_alias_set=${build_alias+set} +-ac_env_build_alias_value=$build_alias +-ac_cv_env_build_alias_set=${build_alias+set} +-ac_cv_env_build_alias_value=$build_alias +-ac_env_host_alias_set=${host_alias+set} +-ac_env_host_alias_value=$host_alias +-ac_cv_env_host_alias_set=${host_alias+set} +-ac_cv_env_host_alias_value=$host_alias +-ac_env_target_alias_set=${target_alias+set} +-ac_env_target_alias_value=$target_alias +-ac_cv_env_target_alias_set=${target_alias+set} +-ac_cv_env_target_alias_value=$target_alias +-ac_env_CC_set=${CC+set} +-ac_env_CC_value=$CC +-ac_cv_env_CC_set=${CC+set} +-ac_cv_env_CC_value=$CC +-ac_env_CFLAGS_set=${CFLAGS+set} +-ac_env_CFLAGS_value=$CFLAGS +-ac_cv_env_CFLAGS_set=${CFLAGS+set} +-ac_cv_env_CFLAGS_value=$CFLAGS +-ac_env_LDFLAGS_set=${LDFLAGS+set} +-ac_env_LDFLAGS_value=$LDFLAGS +-ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +-ac_cv_env_LDFLAGS_value=$LDFLAGS +-ac_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_env_CPPFLAGS_value=$CPPFLAGS +-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_cv_env_CPPFLAGS_value=$CPPFLAGS +-ac_env_CXX_set=${CXX+set} +-ac_env_CXX_value=$CXX +-ac_cv_env_CXX_set=${CXX+set} +-ac_cv_env_CXX_value=$CXX +-ac_env_CXXFLAGS_set=${CXXFLAGS+set} +-ac_env_CXXFLAGS_value=$CXXFLAGS +-ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} +-ac_cv_env_CXXFLAGS_value=$CXXFLAGS +-ac_env_CPP_set=${CPP+set} +-ac_env_CPP_value=$CPP +-ac_cv_env_CPP_set=${CPP+set} +-ac_cv_env_CPP_value=$CPP +-ac_env_CXXCPP_set=${CXXCPP+set} +-ac_env_CXXCPP_value=$CXXCPP +-ac_cv_env_CXXCPP_set=${CXXCPP+set} +-ac_cv_env_CXXCPP_value=$CXXCPP +-ac_env_F77_set=${F77+set} +-ac_env_F77_value=$F77 +-ac_cv_env_F77_set=${F77+set} +-ac_cv_env_F77_value=$F77 +-ac_env_FFLAGS_set=${FFLAGS+set} +-ac_env_FFLAGS_value=$FFLAGS +-ac_cv_env_FFLAGS_set=${FFLAGS+set} +-ac_cv_env_FFLAGS_value=$FFLAGS ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done + + # + # Report the --help message. +@@ -975,9 +1461,6 @@ + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +-_ACEOF +- +- cat <<_ACEOF + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] +@@ -995,15 +1478,22 @@ + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] +- --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --infodir=DIR info documentation [PREFIX/info] +- --mandir=DIR man documentation [PREFIX/man] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/sword] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] + _ACEOF + + cat <<\_ACEOF +@@ -1031,10 +1521,8 @@ + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors +- --enable-shared[=PKGS] +- build shared libraries [default=yes] +- --enable-static[=PKGS] +- build static libraries [default=yes] ++ --enable-shared[=PKGS] build shared libraries [default=yes] ++ --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) +@@ -1053,14 +1541,14 @@ + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic try to use only PIC/non-PIC objects [default=use + both] +- --with-tags[=TAGS] +- include additional configurations [automatic] ++ --with-tags[=TAGS] include additional configurations [automatic] ++ --with-clucene= prefix of CLucene-Core installation. e.g. /usr/local ++ or /usr + --with-zlib allow zlib compressed modules (default=yes) + --with-icu use ICU for unicode (default=no) + --with-conf install a new sword.conf (default=yes) + --with-curl build install manager support using libcurl + (default=yes) +- --with-lucene include lucene support for searching (default=no) + --with-cppunit-prefix=PFX Prefix where CppUnit is installed (optional) + --with-cppunit-exec-prefix=PFX Exec prefix where CppUnit is installed (optional) + +@@ -1069,8 +1557,8 @@ + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory +- CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have +- headers in a nonstandard directory ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory + CXX C++ compiler command + CXXFLAGS C++ compiler flags + CPP C preprocessor +@@ -1083,120 +1571,86 @@ + + Report bugs to . + _ACEOF ++ac_status=$? + fi + + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. +- ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d $ac_dir || continue ++ test -d "$ac_dir" || continue + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac +- +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +- cd $ac_dir +- # Check for guested configure; otherwise get Cygnus style configure. +- if test -f $ac_srcdir/configure.gnu; then +- echo +- $SHELL $ac_srcdir/configure.gnu --help=recursive +- elif test -f $ac_srcdir/configure; then +- echo +- $SHELL $ac_srcdir/configure --help=recursive +- elif test -f $ac_srcdir/configure.ac || +- test -f $ac_srcdir/configure.in; then +- echo +- $ac_configure --help ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 +- fi +- cd $ac_popdir ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } + done + fi + +-test -n "$ac_init_help" && exit 0 ++test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF + sword configure 1.5.9 +-generated by GNU Autoconf 2.59 ++generated by GNU Autoconf 2.60a + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF +- exit 0 ++ exit + fi +-exec 5>config.log +-cat >&5 <<_ACEOF ++cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by sword $as_me 1.5.9, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.60a. Invocation command line was + + $ $0 $@ + + _ACEOF ++exec 5>>config.log + { + cat <<_ASUNAME + ## --------- ## +@@ -1215,7 +1669,7 @@ + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +-hostinfo = `(hostinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +@@ -1229,6 +1683,7 @@ + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" + done ++IFS=$as_save_IFS + + } >&5 + +@@ -1250,7 +1705,6 @@ + ac_configure_args= + ac_configure_args0= + ac_configure_args1= +-ac_sep= + ac_must_keep_next=false + for ac_pass in 1 2 + do +@@ -1261,7 +1715,7 @@ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ++ *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in +@@ -1283,9 +1737,7 @@ + -* ) ac_must_keep_next=true ;; + esac + fi +- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" +- # Get rid of the leading space. +- ac_sep=" " ++ ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +@@ -1296,8 +1748,8 @@ + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there + # would cause problems or look ugly. +-# WARNING: Be sure not to use single quotes in there, as some shells, +-# such as our DU 5.0 friend, will then `close' the trap. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. + trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { +@@ -1310,20 +1762,34 @@ + _ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done + (set) 2>&1 | +- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + sed -n \ +- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" +- ;; ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( + *) +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} ++ esac | ++ sort ++) + echo + + cat <<\_ASBOX +@@ -1334,22 +1800,28 @@ + echo + for ac_var in $ac_subst_vars + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +-## ------------- ## +-## Output files. ## +-## ------------- ## ++## ------------------- ## ++## File substitutions. ## ++## ------------------- ## + _ASBOX + echo + for ac_var in $ac_subst_files + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi +@@ -1361,26 +1833,24 @@ + ## ----------- ## + _ASBOX + echo +- sed "/^$/d" confdefs.h | sort ++ cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 +- rm -f core *.core && +- rm -rf conftest* confdefs* conf$$* $ac_clean_files && ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +- ' 0 ++' 0 + for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. +-rm -rf conftest* confdefs.h +-# AIX cpp loses on an empty file, so make sure it contains at least a newline. +-echo >confdefs.h ++rm -f -r conftest* confdefs.h + + # Predefined preprocessor variables. + +@@ -1411,14 +1881,17 @@ + + # Let the site file select an alternate cache file if it wants to. + # Prefer explicitly selected file to automatically selected ones. +-if test -z "$CONFIG_SITE"; then +- if test "x$prefix" != xNONE; then +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" +- else +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +- fi ++if test -n "$CONFIG_SITE"; then ++ set x "$CONFIG_SITE" ++elif test "x$prefix" != xNONE; then ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" ++else ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" + fi +-for ac_site_file in $CONFIG_SITE; do ++shift ++for ac_site_file ++do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 + echo "$as_me: loading site script $ac_site_file" >&6;} +@@ -1434,8 +1907,8 @@ + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 + echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in +- [\\/]* | ?:[\\/]* ) . $cache_file;; +- *) . ./$cache_file;; ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; + esac + fi + else +@@ -1447,12 +1920,11 @@ + # Check that the precious variables saved in the cache have kept the same + # value. + ac_cache_corrupted=false +-for ac_var in `(set) 2>&1 | +- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do ++for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set +- eval ac_old_val="\$ac_cv_env_${ac_var}_value" +- eval ac_new_val="\$ac_env_${ac_var}_value" ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +@@ -1477,8 +1949,7 @@ + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) +- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in +@@ -1495,12 +1966,6 @@ + { (exit 1); exit 1; }; } + fi + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- + + + +@@ -1525,6 +1990,11 @@ + + + ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +@@ -1532,104 +2002,154 @@ + + + ac_aux_dir= +-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +- if test -f $ac_dir/install-sh; then ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break +- elif test -f $ac_dir/install.sh; then ++ elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break +- elif test -f $ac_dir/shtool; then ++ elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi + done + if test -z "$ac_aux_dir"; then +- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } + fi +-ac_config_guess="$SHELL $ac_aux_dir/config.guess" +-ac_config_sub="$SHELL $ac_aux_dir/config.sub" +-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ + + # Make sure we can run config.sub. +-$ac_config_sub sun4 >/dev/null 2>&1 || +- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +-echo "$as_me: error: cannot run $ac_config_sub" >&2;} ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +-echo "$as_me:$LINENO: checking build system type" >&5 +-echo $ECHO_N "checking build system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } + if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_build_alias=$build_alias +-test -z "$ac_cv_build_alias" && +- ac_cv_build_alias=`$ac_config_guess` +-test -z "$ac_cv_build_alias" && ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 + echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + + fi +-echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +-echo "${ECHO_T}$ac_cv_build" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + build=$ac_cv_build +-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +-echo "$as_me:$LINENO: checking host system type" >&5 +-echo $ECHO_N "checking host system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } + if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_host_alias=$host_alias +-test -z "$ac_cv_host_alias" && +- ac_cv_host_alias=$ac_cv_build_alias +-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +-echo "${ECHO_T}$ac_cv_host" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + host=$ac_cv_host +-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +-echo "$as_me:$LINENO: checking target system type" >&5 +-echo $ECHO_N "checking target system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking target system type" >&5 ++echo $ECHO_N "checking target system type... $ECHO_C" >&6; } + if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_target_alias=$target_alias +-test "x$ac_cv_target_alias" = "x" && +- ac_cv_target_alias=$ac_cv_host_alias +-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} ++ if test "x$target_alias" = x; then ++ ac_cv_target=$ac_cv_host ++else ++ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +-echo "${ECHO_T}$ac_cv_target" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 ++echo "${ECHO_T}$ac_cv_target" >&6; } ++case $ac_cv_target in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 ++echo "$as_me: error: invalid value of canonical target" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + target=$ac_cv_target +-target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_target ++shift ++target_cpu=$1 ++target_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++target_os=$* ++IFS=$ac_save_IFS ++case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + + # The aliases save the names the user supplied, while $host etc. +@@ -1652,8 +2172,8 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -1675,7 +2195,7 @@ + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -1694,21 +2214,22 @@ + ;; + esac + done ++IFS=$as_save_IFS + + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -1718,8 +2239,8 @@ + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +-echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } + # Just in case + sleep 1 + echo timestamp > conftest.file +@@ -1761,20 +2282,20 @@ + Check your system clock" >&2;} + { (exit 1); exit 1; }; } + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + test "$program_prefix" != NONE && +- program_transform_name="s,^,$program_prefix,;$program_transform_name" ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" + # Use a double $ so make ignores it. + test "$program_suffix" != NONE && +- program_transform_name="s,\$,$program_suffix,;$program_transform_name" ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" + # Double any \ or $. echo might interpret backslashes. + # By default was `s,x,x', remove it if useless. + cat <<\_ACEOF >conftest.sed + s/[\\$]/&&/g;s/;s,x,x,$// + _ACEOF + program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +-rm conftest.sed ++rm -f conftest.sed + + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` +@@ -1826,8 +2347,8 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_AWK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1840,54 +2361,57 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + AWK=$ac_cv_prog_AWK + if test -n "$AWK"; then +- echo "$as_me:$LINENO: result: $AWK" >&5 +-echo "${ECHO_T}$AWK" >&6 ++ { echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$AWK" && break + done + +-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh + all: +- @echo 'ac_maketemp="$(MAKE)"' ++ @echo '@@@%%%=$(MAKE)=@@@%%%' + _ACEOF + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. +-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +-if test -n "$ac_maketemp"; then +- eval ac_cv_prog_make_${ac_make}_set=yes +-else +- eval ac_cv_prog_make_${ac_make}_set=no +-fi ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac + rm -f conftest.make + fi +-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + SET_MAKE= + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" + fi + +@@ -1958,8 +2482,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1972,32 +2496,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2010,27 +2536,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" + fi + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- STRIP=$ac_ct_STRIP ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi + else + STRIP="$ac_cv_prog_STRIP" + fi +@@ -2051,7 +2591,7 @@ + + + +- ac_config_headers="$ac_config_headers include/config.h" ++ac_config_headers="$ac_config_headers include/config.h" + + + +@@ -2060,7 +2600,7 @@ + # --------------------------------------------------------------------- + CFLAGS=" $CFLAGS" + CXXFLAGS=" $CXXFLAGS" +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -2074,8 +2614,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2088,32 +2628,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2126,36 +2668,51 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + else + CC="$ac_cv_prog_CC" + fi + + if test -z "$CC"; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2168,74 +2725,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- +-fi +-if test -z "$ac_cv_prog_CC"; then +- ac_ct_CC=$CC +- # Extract the first word of "cc", so it can be a program name with args. +-set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_CC"; then +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +- +-fi +-fi +-ac_ct_CC=$ac_cv_prog_ac_ct_CC +-if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC +-else +- CC="$ac_cv_prog_CC" +-fi + ++ fi + fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2249,7 +2766,7 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue +@@ -2260,6 +2777,7 @@ + fi + done + done ++IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. +@@ -2277,22 +2795,23 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2305,36 +2824,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$CC" && break + done + fi + if test -z "$CC"; then + ac_ct_CC=$CC +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2347,29 +2868,45 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_CC" && break + done + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + fi + + fi +@@ -2382,21 +2919,35 @@ + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C compiler version" >&5 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +@@ -2421,47 +2972,77 @@ + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } + ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 +- (eval $ac_link_default) 2>&5 ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { (ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link_default") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- # Find the output, starting from the most likely. This scheme is +-# not robust to junk in `.', hence go to wildcards (a.*) only as a last +-# resort. +- +-# Be careful to initialize this variable, since it used to be cached. +-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +-ac_cv_exeext= +-# b.out is created by i960 compilers. +-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) +- ;; +- conftest.$ac_ext ) +- # This is the source file. ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) +- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- # FIXME: I believe we export ac_cv_exeext for Libtool, +- # but it would be cool to find out if it's true. Does anybody +- # maintain Libtool? --akim. +- export ac_cv_exeext ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. + break;; + * ) + break;; + esac + done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ + else ++ ac_file='' ++fi ++ ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } ++if test -z "$ac_file"; then + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +@@ -2473,19 +3054,21 @@ + fi + + ac_exeext=$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_file" >&5 +-echo "${ECHO_T}$ac_file" >&6 + +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -2504,22 +3087,27 @@ + fi + fi + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + + rm -f a.out a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-echo "${ECHO_T}$cross_compiling" >&6 +- +-echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +@@ -2530,9 +3118,8 @@ + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- export ac_cv_exeext + break;; + * ) break;; + esac +@@ -2546,14 +3133,14 @@ + fi + + rm -f conftest$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-echo "${ECHO_T}$ac_cv_exeext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } + if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2573,14 +3160,20 @@ + } + _ACEOF + rm -f conftest.o conftest.obj +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +@@ -2598,12 +3191,12 @@ + + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-echo "${ECHO_T}$ac_cv_objext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2626,24 +3219,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -2652,24 +3257,28 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } + GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-CFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -2685,24 +3294,147 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; } && ++ { ac_try='test -s conftest.$ac_objext' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -2711,12 +3443,20 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cc_g=no ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -2732,12 +3472,12 @@ + CFLAGS= + fi + fi +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_prog_cc_stdc=no ++ ac_cv_prog_cc_c89=no + ac_save_CC=$CC + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -2771,12 +3511,17 @@ + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated +- as 'x'. The following induces an error, until -std1 is added to get ++ as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something +- that's true only with -std1. */ ++ that's true only with -std. */ + int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ + int test (int i, double x); + struct s1 {int (*f) (int a);}; + struct s2 {int (*f) (double a);}; +@@ -2791,213 +3536,82 @@ + return 0; + } + _ACEOF +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX 10.20 and later -Ae +-# HP-UX older versions -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +- ac_cv_prog_cc_stdc=$ac_arg +-break ++ ac_cv_prog_cc_c89=$ac_arg + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break + done +-rm -f conftest.$ac_ext conftest.$ac_objext ++rm -f conftest.$ac_ext + CC=$ac_save_CC + + fi +- +-case "x$ac_cv_prog_cc_stdc" in +- x|xno) +- echo "$as_me:$LINENO: result: none needed" >&5 +-echo "${ECHO_T}none needed" >&6 ;; ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; ++ xno) ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; + *) +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 +- CC="$CC $ac_cv_prog_cc_stdc" ;; ++ CC="$CC $ac_cv_prog_cc_c89" ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + esac + +-# Some people use a C++ compiler to compile C. Since we use `exit', +-# in C++ we need to declare it. In case someone uses the same compiler +-# for both compiling C and C++ we need to have the C++ compiler decide +-# the declaration of exit, since it's the most demanding environment. +-cat >conftest.$ac_ext <<_ACEOF +-#ifndef __cplusplus +- choke me +-#endif +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-#include +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-continue +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h +-fi +- +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + DEPDIR="${am__leading_dot}deps" + +- ac_config_commands="$ac_config_commands depfiles" ++ac_config_commands="$ac_config_commands depfiles" + + + am_make=${MAKE-make} +@@ -3007,8 +3621,8 @@ + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } + am__include="#" + am__quote= + _am_result=none +@@ -3035,15 +3649,15 @@ + fi + + +-echo "$as_me:$LINENO: result: $_am_result" >&5 +-echo "${ECHO_T}$_am_result" >&6 ++{ echo "$as_me:$LINENO: result: $_am_result" >&5 ++echo "${ECHO_T}$_am_result" >&6; } + rm -f confinc confmf + +-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. ++# Check whether --enable-dependency-tracking was given. + if test "${enable_dependency_tracking+set}" = set; then +- enableval="$enable_dependency_tracking" ++ enableval=$enable_dependency_tracking; ++fi + +-fi; + if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +@@ -3063,8 +3677,8 @@ + + depcc="$CC" am_compiler_list= + +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3153,8 +3767,8 @@ + fi + + fi +-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + +@@ -3170,18 +3784,22 @@ + fi + + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-if test -n "$ac_tool_prefix"; then +- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ++if test -z "$CXX"; then ++ if test -n "$CCC"; then ++ CXX=$CCC ++ else ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3194,36 +3812,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CXX=$ac_cv_prog_CXX + if test -n "$CXX"; then +- echo "$as_me:$LINENO: result: $CXX" >&5 +-echo "${ECHO_T}$CXX" >&6 ++ { echo "$as_me:$LINENO: result: $CXX" >&5 ++echo "${ECHO_T}$CXX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$CXX" && break + done + fi + if test -z "$CXX"; then + ac_ct_CXX=$CXX +- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3236,55 +3856,85 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CXX="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CXX=$ac_cv_prog_ac_ct_CXX + if test -n "$ac_ct_CXX"; then +- echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +-echo "${ECHO_T}$ac_ct_CXX" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 ++echo "${ECHO_T}$ac_ct_CXX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_CXX" && break + done +-test -n "$ac_ct_CXX" || ac_ct_CXX="g++" + +- CXX=$ac_ct_CXX ++ if test "x$ac_ct_CXX" = x; then ++ CXX="g++" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CXX=$ac_ct_CXX ++ fi + fi + +- ++ fi ++fi + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C++ compiler version" >&5 ++echo "$as_me:$LINENO: checking for C++ compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +-echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; } + if test "${ac_cv_cxx_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3307,24 +3957,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -3333,24 +3995,28 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; } + GXX=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CXXFLAGS=${CXXFLAGS+set} + ac_save_CXXFLAGS=$CXXFLAGS +-CXXFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 ++echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cxx_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_cxx_werror_flag=$ac_cxx_werror_flag ++ ac_cxx_werror_flag=yes ++ ac_cv_prog_cxx_g=no ++ CXXFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -3366,24 +4032,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -3392,70 +4070,53 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cxx_g=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 +-if test "$ac_test_CXXFLAGS" = set; then +- CXXFLAGS=$ac_save_CXXFLAGS +-elif test $ac_cv_prog_cxx_g = yes; then +- if test "$GXX" = yes; then +- CXXFLAGS="-g -O2" +- else +- CXXFLAGS="-g" +- fi +-else +- if test "$GXX" = yes; then +- CXXFLAGS="-O2" +- else +- CXXFLAGS= +- fi +-fi +-for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF ++ CXXFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_declaration +-#include ++ + int + main () + { +-exit (42); ++ + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -3464,62 +4125,92 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-continue +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++ CXXFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_declaration ++ + int + main () + { +-exit (42); ++ + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +- break ++ ac_cv_prog_cxx_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + +-ac_ext=cc ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; } ++if test "$ac_test_CXXFLAGS" = set; then ++ CXXFLAGS=$ac_save_CXXFLAGS ++elif test $ac_cv_prog_cxx_g = yes; then ++ if test "$GXX" = yes; then ++ CXXFLAGS="-g -O2" ++ else ++ CXXFLAGS="-g" ++ fi ++else ++ if test "$GXX" = yes; then ++ CXXFLAGS="-O2" ++ else ++ CXXFLAGS= ++ fi ++fi ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -3527,8 +4218,8 @@ + + depcc="$CXX" am_compiler_list= + +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3617,8 +4308,8 @@ + fi + + fi +-echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6 ++{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; } + CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + + +@@ -3647,8 +4338,8 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -3670,7 +4361,7 @@ + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -3689,21 +4380,22 @@ + ;; + esac + done ++IFS=$as_save_IFS + + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -3715,10 +4407,9 @@ + + + +-# Check whether --enable-shared or --disable-shared was given. ++# Check whether --enable-shared was given. + if test "${enable_shared+set}" = set; then +- enableval="$enable_shared" +- p=${PACKAGE-default} ++ enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; +@@ -3737,12 +4428,12 @@ + esac + else + enable_shared=yes +-fi; ++fi ++ + +-# Check whether --enable-static or --disable-static was given. ++# Check whether --enable-static was given. + if test "${enable_static+set}" = set; then +- enableval="$enable_static" +- p=${PACKAGE-default} ++ enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; +@@ -3761,12 +4452,12 @@ + esac + else + enable_static=yes +-fi; ++fi ++ + +-# Check whether --enable-fast-install or --disable-fast-install was given. ++# Check whether --enable-fast-install was given. + if test "${enable_fast_install+set}" = set; then +- enableval="$enable_fast_install" +- p=${PACKAGE-default} ++ enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; +@@ -3785,10 +4476,11 @@ + esac + else + enable_fast_install=yes +-fi; ++fi ++ + +-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } + if test "${lt_cv_path_SED+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3841,37 +4533,184 @@ + fi + + SED=$lt_cv_path_SED +-echo "$as_me:$LINENO: result: $SED" >&5 +-echo "${ECHO_T}$SED" >&6 ++{ echo "$as_me:$LINENO: result: $SED" >&5 ++echo "${ECHO_T}$SED" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_GREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_executable_p "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_GREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ + +-echo "$as_me:$LINENO: checking for egrep" >&5 +-echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +-if test "${ac_cv_prog_egrep+set}" = set; then ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_EGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_executable_p "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_EGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_EGREP=$EGREP ++fi ++ ++ ++ fi + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +-echo "${ECHO_T}$ac_cv_prog_egrep" >&6 +- EGREP=$ac_cv_prog_egrep ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" + + + +-# Check whether --with-gnu-ld or --without-gnu-ld was given. ++# Check whether --with-gnu-ld was given. + if test "${with_gnu_ld+set}" = set; then +- withval="$with_gnu_ld" +- test "$withval" = no || with_gnu_ld=yes ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no +-fi; ++fi ++ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -3900,11 +4739,11 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- echo "$as_me:$LINENO: checking for GNU ld" >&5 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } + else +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } + fi + if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -3937,17 +4776,17 @@ + + LD="$lt_cv_path_LD" + if test -n "$LD"; then +- echo "$as_me:$LINENO: result: $LD" >&5 +-echo "${ECHO_T}$LD" >&6 ++ { echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 + echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } + if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3961,20 +4800,20 @@ + ;; + esac + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + + +-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_ld_reload_flag='-r' + fi +-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } + reload_flag=$lt_cv_ld_reload_flag + case $reload_flag in + "" | " "*) ;; +@@ -3991,8 +4830,8 @@ + ;; + esac + +-echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 +-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 ++echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; } + if test "${lt_cv_path_NM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4040,23 +4879,23 @@ + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + fi + fi +-echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +-echo "${ECHO_T}$lt_cv_path_NM" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; } + NM="$lt_cv_path_NM" + +-echo "$as_me:$LINENO: checking whether ln -s works" >&5 +-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } + LN_S=$as_ln_s + if test "$LN_S" = "ln -s"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +-echo "${ECHO_T}no, using $LN_S" >&6 ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } + fi + +-echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 +-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 ++echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6; } + if test "${lt_cv_deplibs_check_method+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4106,7 +4945,7 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-freebsd* | kfreebsd*-gnu | dragonfly*) ++freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) +@@ -4160,11 +4999,11 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) ++netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else +@@ -4231,8 +5070,8 @@ + esac + + fi +-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -4250,11 +5089,11 @@ + compiler=$CC + + +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given. ++# Check whether --enable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then +- enableval="$enable_libtool_lock" ++ enableval=$enable_libtool_lock; ++fi + +-fi; + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + # Some flags need to be propagated to the compiler or linker for good +@@ -4281,7 +5120,7 @@ + ;; + *-*-irix6*) + # Find out which ABI we are using. +- echo '#line 4284 "configure"' > conftest.$ac_ext ++ echo '#line 5123 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +@@ -4366,8 +5205,8 @@ + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" +- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } + if test "${lt_cv_cc_needs_belf+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4393,24 +5232,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -4419,9 +5270,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-lt_cv_cc_needs_belf=no ++ lt_cv_cc_needs_belf=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -4430,8 +5282,8 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" +@@ -4461,8 +5313,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. + set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_DLLTOOL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4475,32 +5327,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + DLLTOOL=$ac_cv_prog_DLLTOOL + if test -n "$DLLTOOL"; then +- echo "$as_me:$LINENO: result: $DLLTOOL" >&5 +-echo "${ECHO_T}$DLLTOOL" >&6 ++ { echo "$as_me:$LINENO: result: $DLLTOOL" >&5 ++echo "${ECHO_T}$DLLTOOL" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. + set dummy dlltool; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4513,27 +5367,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false" + fi + fi + ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL + if test -n "$ac_ct_DLLTOOL"; then +- echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 +-echo "${ECHO_T}$ac_ct_DLLTOOL" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 ++echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- DLLTOOL=$ac_ct_DLLTOOL ++ if test "x$ac_ct_DLLTOOL" = x; then ++ DLLTOOL="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ DLLTOOL=$ac_ct_DLLTOOL ++ fi + else + DLLTOOL="$ac_cv_prog_DLLTOOL" + fi +@@ -4541,8 +5409,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. + set dummy ${ac_tool_prefix}as; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_AS+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4555,32 +5423,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AS="${ac_tool_prefix}as" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + AS=$ac_cv_prog_AS + if test -n "$AS"; then +- echo "$as_me:$LINENO: result: $AS" >&5 +-echo "${ECHO_T}$AS" >&6 ++ { echo "$as_me:$LINENO: result: $AS" >&5 ++echo "${ECHO_T}$AS" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. + set dummy as; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_AS+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4593,27 +5463,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AS="as" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false" + fi + fi + ac_ct_AS=$ac_cv_prog_ac_ct_AS + if test -n "$ac_ct_AS"; then +- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 +-echo "${ECHO_T}$ac_ct_AS" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 ++echo "${ECHO_T}$ac_ct_AS" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- AS=$ac_ct_AS ++ if test "x$ac_ct_AS" = x; then ++ AS="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ AS=$ac_ct_AS ++ fi + else + AS="$ac_cv_prog_AS" + fi +@@ -4621,8 +5505,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. + set dummy ${ac_tool_prefix}objdump; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_OBJDUMP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4635,32 +5519,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + OBJDUMP=$ac_cv_prog_OBJDUMP + if test -n "$OBJDUMP"; then +- echo "$as_me:$LINENO: result: $OBJDUMP" >&5 +-echo "${ECHO_T}$OBJDUMP" >&6 ++ { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 ++echo "${ECHO_T}$OBJDUMP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. + set dummy objdump; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4673,27 +5559,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" + fi + fi + ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP + if test -n "$ac_ct_OBJDUMP"; then +- echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 +-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 ++echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- OBJDUMP=$ac_ct_OBJDUMP ++ if test "x$ac_ct_OBJDUMP" = x; then ++ OBJDUMP="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ OBJDUMP=$ac_ct_OBJDUMP ++ fi + else + OBJDUMP="$ac_cv_prog_OBJDUMP" + fi +@@ -4710,8 +5610,8 @@ + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= +@@ -4745,8 +5645,13 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -4771,9 +5676,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -4783,8 +5689,13 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -4811,6 +5722,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -4828,8 +5740,8 @@ + else + ac_cv_prog_CPP=$CPP + fi +-echo "$as_me:$LINENO: result: $CPP" >&5 +-echo "${ECHO_T}$CPP" >&6 ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do +@@ -4852,8 +5764,13 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -4878,9 +5795,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -4890,8 +5808,13 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -4918,6 +5841,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -4940,8 +5864,8 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } + if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4965,24 +5889,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -4991,9 +5927,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_header_stdc=no ++ ac_cv_header_stdc=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +@@ -5049,6 +5986,7 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include ++#include + #if ((' ' & 0x0FF) == 0x020) + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +@@ -5068,18 +6006,27 @@ + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) +- exit(2); +- exit (0); ++ return 2; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5092,12 +6039,14 @@ + ( exit $ac_status ) + ac_cv_header_stdc=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -5120,9 +6069,9 @@ + inttypes.h stdint.h unistd.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -5136,24 +6085,36 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5162,12 +6123,14 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_Header=no" ++ eval "$as_ac_Header=no" + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +@@ -5182,18 +6145,19 @@ + for ac_header in dlfcn.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5204,24 +6168,36 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5230,15 +6206,16 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5247,8 +6224,13 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -5272,9 +6254,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -5298,25 +6281,24 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX ++ ( cat <<\_ASBOX + ## --------------------------------------- ## + ## Report this to sword-bugs@crosswire.org ## + ## --------------------------------------- ## + _ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -5333,13 +6315,13 @@ + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then +- ac_ext=cc ++ ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 ++echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; } + if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -5369,8 +6351,13 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -5395,9 +6382,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5407,8 +6395,13 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -5435,6 +6428,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -5452,8 +6446,8 @@ + else + ac_cv_prog_CXXCPP=$CXXCPP + fi +-echo "$as_me:$LINENO: result: $CXXCPP" >&5 +-echo "${ECHO_T}$CXXCPP" >&6 ++{ echo "$as_me:$LINENO: result: $CXXCPP" >&5 ++echo "${ECHO_T}$CXXCPP" >&6; } + ac_preproc_ok=false + for ac_cxx_preproc_warn_flag in '' yes + do +@@ -5476,8 +6470,13 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -5502,9 +6501,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5514,8 +6514,13 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 +@@ -5542,6 +6547,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -5557,7 +6563,7 @@ + { (exit 1); exit 1; }; } + fi + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -5571,12 +6577,12 @@ + ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_f77_compiler_gnu + if test -n "$ac_tool_prefix"; then +- for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran ++ for ac_prog in g77 f77 xlf frt pgf77 cf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 gfortran g95 f95 fort xlf95 ifort ifc efc pgf95 lf95 ftn + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5589,36 +6595,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_F77="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + F77=$ac_cv_prog_F77 + if test -n "$F77"; then +- echo "$as_me:$LINENO: result: $F77" >&5 +-echo "${ECHO_T}$F77" >&6 ++ { echo "$as_me:$LINENO: result: $F77" >&5 ++echo "${ECHO_T}$F77" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$F77" && break + done + fi + if test -z "$F77"; then + ac_ct_F77=$F77 +- for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran ++ for ac_prog in g77 f77 xlf frt pgf77 cf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 gfortran g95 f95 fort xlf95 ifort ifc efc pgf95 lf95 ftn + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5631,48 +6639,78 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_F77="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_F77=$ac_cv_prog_ac_ct_F77 + if test -n "$ac_ct_F77"; then +- echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 +-echo "${ECHO_T}$ac_ct_F77" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 ++echo "${ECHO_T}$ac_ct_F77" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_F77" && break + done + +- F77=$ac_ct_F77 ++ if test "x$ac_ct_F77" = x; then ++ F77="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ F77=$ac_ct_F77 ++ fi + fi + + + # Provide some information about the compiler. +-echo "$as_me:5661:" \ +- "checking for Fortran 77 compiler version" >&5 ++echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +@@ -5682,8 +6720,8 @@ + # input file. (Note that this only needs to work for GNU compilers.) + ac_save_ext=$ac_ext + ac_ext=F +-echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; } + if test "${ac_cv_f77_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5696,24 +6734,36 @@ + end + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5722,20 +6772,21 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_f77_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; } + ac_ext=$ac_save_ext + ac_test_FFLAGS=${FFLAGS+set} + ac_save_FFLAGS=$FFLAGS + FFLAGS= +-echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 +-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 ++echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_f77_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5746,24 +6797,36 @@ + end + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -5772,13 +6835,14 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_f77_g=no ++ ac_cv_prog_f77_g=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; } + if test "$ac_test_FFLAGS" = set; then + FFLAGS=$ac_save_FFLAGS + elif test $ac_cv_prog_f77_g = yes; then +@@ -5796,7 +6860,7 @@ + fi + + G77=`test $ac_compiler_gnu = yes && echo yes` +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -5807,8 +6871,8 @@ + # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! + + # find the maximum length of command line arguments +-echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } + if test "${lt_cv_sys_max_cmd_len+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5916,19 +6980,19 @@ + fi + + if test -n $lt_cv_sys_max_cmd_len ; then +- echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } + else +- echo "$as_me:$LINENO: result: none" >&5 +-echo "${ECHO_T}none" >&6 ++ { echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6; } + fi + + + + + # Check for command to grab the raw symbol name followed by C symbol from nm. +-echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } + if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5963,7 +7027,7 @@ + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +-linux*) ++linux* | k*bsd*-gnu) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +@@ -6132,15 +7196,15 @@ + lt_cv_sys_global_symbol_to_cdecl= + fi + if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- echo "$as_me:$LINENO: result: failed" >&5 +-echo "${ECHO_T}failed" >&6 ++ { echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6; } + else +- echo "$as_me:$LINENO: result: ok" >&5 +-echo "${ECHO_T}ok" >&6 ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } + fi + +-echo "$as_me:$LINENO: checking for objdir" >&5 +-echo $ECHO_N "checking for objdir... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } + if test "${lt_cv_objdir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6154,8 +7218,8 @@ + fi + rmdir .libs 2>/dev/null + fi +-echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +-echo "${ECHO_T}$lt_cv_objdir" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6; } + objdir=$lt_cv_objdir + + +@@ -6206,8 +7270,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. + set dummy ${ac_tool_prefix}ar; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6220,32 +7284,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + AR=$ac_cv_prog_AR + if test -n "$AR"; then +- echo "$as_me:$LINENO: result: $AR" >&5 +-echo "${ECHO_T}$AR" >&6 ++ { echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. + set dummy ar; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6258,27 +7324,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" + fi + fi + ac_ct_AR=$ac_cv_prog_ac_ct_AR + if test -n "$ac_ct_AR"; then +- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +-echo "${ECHO_T}$ac_ct_AR" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- AR=$ac_ct_AR ++ if test "x$ac_ct_AR" = x; then ++ AR="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ AR=$ac_ct_AR ++ fi + else + AR="$ac_cv_prog_AR" + fi +@@ -6286,8 +7366,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. + set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6300,32 +7380,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + RANLIB=$ac_cv_prog_RANLIB + if test -n "$RANLIB"; then +- echo "$as_me:$LINENO: result: $RANLIB" >&5 +-echo "${ECHO_T}$RANLIB" >&6 ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. + set dummy ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6338,27 +7420,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" + fi + fi + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB + if test -n "$ac_ct_RANLIB"; then +- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- RANLIB=$ac_ct_RANLIB ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ RANLIB=$ac_ct_RANLIB ++ fi + else + RANLIB="$ac_cv_prog_RANLIB" + fi +@@ -6366,8 +7462,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6380,32 +7476,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6418,27 +7516,41 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" + fi + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- STRIP=$ac_ct_STRIP ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi + else + STRIP="$ac_cv_prog_STRIP" + fi +@@ -6497,8 +7609,8 @@ + case $deplibs_check_method in + file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6550,17 +7662,17 @@ + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6 ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then +- echo "$as_me:$LINENO: checking for file" >&5 +-echo $ECHO_N "checking for file... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; } + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6612,11 +7724,11 @@ + + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if test -n "$MAGIC_CMD"; then +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6 ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + else +@@ -6631,21 +7743,21 @@ + enable_dlopen=no + enable_win32_dll=yes + +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given. ++# Check whether --enable-libtool-lock was given. + if test "${enable_libtool_lock+set}" = set; then +- enableval="$enable_libtool_lock" ++ enableval=$enable_libtool_lock; ++fi + +-fi; + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + +-# Check whether --with-pic or --without-pic was given. ++# Check whether --with-pic was given. + if test "${with_pic+set}" = set; then +- withval="$with_pic" +- pic_mode="$withval" ++ withval=$with_pic; pic_mode="$withval" + else + pic_mode=default +-fi; ++fi ++ + test -z "$pic_mode" && pic_mode=default + + # Use C for the default configuration in the libtool script +@@ -6703,8 +7815,8 @@ + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +-echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6721,11 +7833,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:6724: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:7836: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:6728: \$? = $ac_status" >&5 ++ echo "$as_me:7840: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -6738,8 +7850,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +@@ -6753,8 +7865,8 @@ + lt_prog_compiler_pic= + lt_prog_compiler_static= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' +@@ -6883,7 +7995,7 @@ + lt_prog_compiler_static='-Bstatic' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl='-Wl,' +@@ -6963,16 +8075,16 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_pic_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -6989,11 +8101,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:6992: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:8104: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:6996: \$? = $ac_status" >&5 ++ echo "$as_me:8108: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -7006,8 +8118,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; } + + if test x"$lt_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in +@@ -7034,8 +8146,8 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_static_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7062,8 +8174,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; } + + if test x"$lt_prog_compiler_static_works" = xyes; then + : +@@ -7072,8 +8184,8 @@ + fi + + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -7093,11 +8205,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:7096: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:8208: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:7100: \$? = $ac_status" >&5 ++ echo "$as_me:8212: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -7119,23 +8231,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -7145,8 +8257,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag= +@@ -7322,7 +8434,7 @@ + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in +@@ -7348,12 +8460,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ link_all_deplibs=no + else + ld_shlibs=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -7561,24 +8674,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -7592,8 +8717,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -7622,24 +8749,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -7653,8 +8792,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -7785,7 +8926,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes +@@ -7887,7 +9028,7 @@ + link_all_deplibs=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -8103,8 +9244,8 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +-echo "${ECHO_T}$ld_shlibs" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6; } + test "$ld_shlibs" = no && can_build_shared=no + + # +@@ -8124,8 +9265,8 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +@@ -8162,16 +9303,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -8377,18 +9518,6 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- + freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. +@@ -8544,7 +9673,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -8558,31 +9687,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 8565 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -8594,7 +9702,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -8603,7 +9711,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -8779,8 +9887,8 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +@@ -8788,8 +9896,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action= + if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var" || \ +@@ -8813,8 +9921,8 @@ + # directories. + hardcode_action=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action" >&5 +-echo "${ECHO_T}$hardcode_action" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6; } + + if test "$hardcode_action" = relink; then + # Fast installation is not supported +@@ -8827,29 +9935,29 @@ + + striplib= + old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } + if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else + # FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ;; + *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + ;; + esac + fi +@@ -8881,8 +9989,8 @@ + + darwin*) + # if libdl is installed we need to link against it +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } + if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8895,40 +10003,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { +-dlopen (); ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -8937,14 +10057,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dl_dlopen=no ++ ac_cv_lib_dl_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } + if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + else +@@ -8958,8 +10079,8 @@ + ;; + + *) +- echo "$as_me:$LINENO: checking for shl_load" >&5 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } + if test "${ac_cv_func_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8986,53 +10107,59 @@ + + #undef shl_load + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char shl_load (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shl_load) || defined (__stub___shl_load) ++#if defined __stub_shl_load || defined __stub___shl_load + choke me +-#else +-char (*f) () = shl_load; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != shl_load; ++return shl_load (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9041,18 +10168,19 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_shl_load=no ++ ac_cv_func_shl_load=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } + if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" + else +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } + if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9065,40 +10193,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char shl_load (); + int + main () + { +-shl_load (); ++return shl_load (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9107,19 +10247,20 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dld_shl_load=no ++ ac_cv_lib_dld_shl_load=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } + if test $ac_cv_lib_dld_shl_load = yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" + else +- echo "$as_me:$LINENO: checking for dlopen" >&5 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } + if test "${ac_cv_func_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9146,53 +10287,59 @@ + + #undef dlopen + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_dlopen) || defined (__stub___dlopen) ++#if defined __stub_dlopen || defined __stub___dlopen + choke me +-#else +-char (*f) () = dlopen; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != dlopen; ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9201,18 +10348,19 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_dlopen=no ++ ac_cv_func_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } + if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" + else +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } + if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9225,40 +10373,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { +-dlopen (); ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9267,19 +10427,20 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dl_dlopen=no ++ ac_cv_lib_dl_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } + if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + else +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } + if test "${ac_cv_lib_svld_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9292,40 +10453,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dlopen (); + int + main () + { +-dlopen (); ++return dlopen (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9334,19 +10507,20 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_svld_dlopen=no ++ ac_cv_lib_svld_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } + if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" + else +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } + if test "${ac_cv_lib_dld_dld_link+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9359,40 +10533,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char dld_link (); + int + main () + { +-dld_link (); ++return dld_link (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -9401,14 +10587,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dld_dld_link=no ++ ac_cv_lib_dld_dld_link=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } + if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" + fi +@@ -9448,8 +10635,8 @@ + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } + if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9459,7 +10646,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <&5 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } + if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -9559,7 +10746,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <&5 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" +@@ -9666,13 +10853,13 @@ + + + # Report which library types will actually be built +-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6 ++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and +@@ -9692,15 +10879,15 @@ + fi + ;; + esac +-echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6 ++{ echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes +-echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6 ++{ echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } + + # The else clause should only fire when bootstrapping the + # libtool distribution, otherwise you forgot to ship ltmain.sh +@@ -10183,7 +11370,7 @@ + fi + + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -10192,11 +11379,11 @@ + CC="$lt_save_CC" + + +-# Check whether --with-tags or --without-tags was given. ++# Check whether --with-tags was given. + if test "${with_tags+set}" = set; then +- withval="$with_tags" +- tagnames="$withval" +-fi; ++ withval=$with_tags; tagnames="$withval" ++fi ++ + + if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then +@@ -10250,7 +11437,7 @@ + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then +- ac_ext=cc ++ ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -10369,18 +11556,18 @@ + # Set up default GNU C++ configuration + + +-# Check whether --with-gnu-ld or --without-gnu-ld was given. ++# Check whether --with-gnu-ld was given. + if test "${with_gnu_ld+set}" = set; then +- withval="$with_gnu_ld" +- test "$withval" = no || with_gnu_ld=yes ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no +-fi; ++fi ++ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -10409,11 +11596,11 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- echo "$as_me:$LINENO: checking for GNU ld" >&5 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } + else +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } + fi + if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -10446,17 +11633,17 @@ + + LD="$lt_cv_path_LD" + if test -n "$LD"; then +- echo "$as_me:$LINENO: result: $LD" >&5 +-echo "${ECHO_T}$LD" >&6 ++ { echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 + echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } + if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -10470,8 +11657,8 @@ + ;; + esac + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + + +@@ -10521,8 +11708,8 @@ + fi + + # PORTME: fill in a description of your system's C++ link characteristics +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + ld_shlibs_CXX=yes + case $host_os in + aix3*) +@@ -10634,24 +11821,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -10665,8 +11864,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -10696,24 +11897,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -10727,8 +11940,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -10876,7 +12091,7 @@ + freebsd-elf*) + archive_cmds_need_lc_CXX=no + ;; +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + ld_shlibs_CXX=yes +@@ -11035,7 +12250,7 @@ + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler +@@ -11137,7 +12352,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= +@@ -11459,8 +12674,8 @@ + ld_shlibs_CXX=no + ;; + esac +-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-echo "${ECHO_T}$ld_shlibs_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + + GCC_CXX="$GXX" +@@ -11599,8 +12814,8 @@ + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then +@@ -11704,7 +12919,7 @@ + ;; + esac + ;; +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) +@@ -11747,7 +12962,7 @@ + ;; + esac + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler +@@ -11790,7 +13005,7 @@ + ;; + esac + ;; +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in +@@ -11873,16 +13088,16 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_CXX"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -11899,11 +13114,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:11902: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:13117: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:11906: \$? = $ac_status" >&5 ++ echo "$as_me:13121: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -11916,8 +13131,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; } + + if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in +@@ -11944,8 +13159,8 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_static_works_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -11972,8 +13187,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; } + + if test x"$lt_prog_compiler_static_works_CXX" = xyes; then + : +@@ -11982,8 +13197,8 @@ + fi + + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -12003,11 +13218,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:12006: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:13221: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:12010: \$? = $ac_status" >&5 ++ echo "$as_me:13225: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -12029,23 +13244,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -12055,8 +13270,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in +@@ -12075,13 +13290,16 @@ + cygwin* | mingw*) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; ++ linux* | k*bsd*-gnu) ++ link_all_deplibs_CXX=no ++ ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + +-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-echo "${ECHO_T}$ld_shlibs_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + + # +@@ -12101,8 +13319,8 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +@@ -12139,16 +13357,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -12354,18 +13572,6 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- + freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. +@@ -12521,7 +13727,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -12535,31 +13741,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 12542 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -12571,7 +13756,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -12580,7 +13765,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -12756,8 +13941,8 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +@@ -12765,8 +13950,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_CXX= + if test -n "$hardcode_libdir_flag_spec_CXX" || \ + test -n "$runpath_var_CXX" || \ +@@ -12790,8 +13975,8 @@ + # directories. + hardcode_action_CXX=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 +-echo "${ECHO_T}$hardcode_action_CXX" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 ++echo "${ECHO_T}$hardcode_action_CXX" >&6; } + + if test "$hardcode_action_CXX" = relink; then + # Fast installation is not supported +@@ -13211,7 +14396,7 @@ + fi + + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -13316,13 +14501,13 @@ + cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6 ++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and +@@ -13341,15 +14526,15 @@ + fi + ;; + esac +-echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6 ++{ echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } + +-echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes +-echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6 ++{ echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } + + GCC_F77="$G77" + LD_F77="$LD" +@@ -13358,8 +14543,8 @@ + lt_prog_compiler_pic_F77= + lt_prog_compiler_static_F77= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_F77='-Wl,' +@@ -13488,7 +14673,7 @@ + lt_prog_compiler_static_F77='-Bstatic' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl_F77='-Wl,' +@@ -13568,16 +14753,16 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_F77"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_pic_works_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -13594,11 +14779,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13597: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:14782: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:13601: \$? = $ac_status" >&5 ++ echo "$as_me:14786: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -13611,8 +14796,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; } + + if test x"$lt_prog_compiler_pic_works_F77" = xyes; then + case $lt_prog_compiler_pic_F77 in +@@ -13639,8 +14824,8 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_static_works_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -13667,8 +14852,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; } + + if test x"$lt_prog_compiler_static_works_F77" = xyes; then + : +@@ -13677,8 +14862,8 @@ + fi + + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -13698,11 +14883,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13701: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:14886: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:13705: \$? = $ac_status" >&5 ++ echo "$as_me:14890: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -13724,23 +14909,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -13750,8 +14935,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag_F77= +@@ -13927,7 +15112,7 @@ + archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in +@@ -13953,12 +15138,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ link_all_deplibs_F77=no + else + ld_shlibs_F77=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -14156,24 +15342,36 @@ + end + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -14187,8 +15385,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -14207,24 +15407,36 @@ + end + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -14238,8 +15450,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -14370,7 +15584,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes +@@ -14472,7 +15686,7 @@ + link_all_deplibs_F77=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -14688,8 +15902,8 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 +-echo "${ECHO_T}$ld_shlibs_F77" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 ++echo "${ECHO_T}$ld_shlibs_F77" >&6; } + test "$ld_shlibs_F77" = no && can_build_shared=no + + # +@@ -14709,8 +15923,8 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +@@ -14747,16 +15961,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -14962,18 +16176,6 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- + freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. +@@ -15129,7 +16331,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -15143,31 +16345,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 15150 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -15179,7 +16360,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -15188,7 +16369,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -15364,8 +16545,8 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +@@ -15373,8 +16554,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_F77= + if test -n "$hardcode_libdir_flag_spec_F77" || \ + test -n "$runpath_var_F77" || \ +@@ -15398,8 +16579,8 @@ + # directories. + hardcode_action_F77=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 +-echo "${ECHO_T}$hardcode_action_F77" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 ++echo "${ECHO_T}$hardcode_action_F77" >&6; } + + if test "$hardcode_action_F77" = relink; then + # Fast installation is not supported +@@ -15819,7 +17000,7 @@ + fi + + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -15836,7 +17017,6 @@ + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + + +- + # Source file extension for Java test sources. + ac_ext=java + +@@ -15904,8 +17084,8 @@ + lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + + +-echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -15922,11 +17102,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:15925: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:17105: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:15929: \$? = $ac_status" >&5 ++ echo "$as_me:17109: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -15939,8 +17119,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" +@@ -15954,8 +17134,8 @@ + lt_prog_compiler_pic_GCJ= + lt_prog_compiler_static_GCJ= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_GCJ='-Wl,' +@@ -16084,7 +17264,7 @@ + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl_GCJ='-Wl,' +@@ -16164,16 +17344,16 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; } + + # + # Check to make sure the PIC flag actually works. + # + if test -n "$lt_prog_compiler_pic_GCJ"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -16190,11 +17370,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:16193: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:17373: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:16197: \$? = $ac_status" >&5 ++ echo "$as_me:17377: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -16207,8 +17387,8 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; } + + if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then + case $lt_prog_compiler_pic_GCJ in +@@ -16235,8 +17415,8 @@ + # Check to make sure the static flag actually works. + # + wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } + if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -16263,8 +17443,8 @@ + LDFLAGS="$save_LDFLAGS" + + fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; } + + if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then + : +@@ -16273,8 +17453,8 @@ + fi + + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } + if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -16294,11 +17474,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:16297: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:17477: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:16301: \$? = $ac_status" >&5 ++ echo "$as_me:17481: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -16320,23 +17500,23 @@ + $rm conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; } + + + hard_links="nottested" + if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +@@ -16346,8 +17526,8 @@ + need_locks=no + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + + runpath_var= + allow_undefined_flag_GCJ= +@@ -16523,7 +17703,7 @@ + archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + +- linux*) ++ linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in +@@ -16549,12 +17729,13 @@ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ++ link_all_deplibs_GCJ=no + else + ld_shlibs_GCJ=no + fi + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -16762,24 +17943,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -16793,8 +17986,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -16823,24 +18018,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -16854,8 +18061,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +@@ -16986,7 +18195,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu | dragonfly*) ++ freebsd* | dragonfly*) + archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes +@@ -17088,7 +18297,7 @@ + link_all_deplibs_GCJ=yes + ;; + +- netbsd*) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -17304,8 +18513,8 @@ + esac + fi + +-echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 +-echo "${ECHO_T}$ld_shlibs_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 ++echo "${ECHO_T}$ld_shlibs_GCJ" >&6; } + test "$ld_shlibs_GCJ" = no && can_build_shared=no + + # +@@ -17325,8 +18534,8 @@ + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +@@ -17363,16 +18572,16 @@ + cat conftest.err 1>&5 + fi + $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6 ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; } + ;; + esac + fi + ;; + esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } + library_names_spec= + libname_spec='lib$name' + soname_spec= +@@ -17578,18 +18787,6 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- + freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. +@@ -17745,7 +18942,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -17759,31 +18956,10 @@ + # before this can be enabled. + hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 17766 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -17795,7 +18971,7 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + +-knetbsd*-gnu) ++netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -17804,7 +18980,7 @@ + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' ++ dynamic_linker='NetBSD ld.elf_so' + ;; + + netbsd*) +@@ -17980,8 +19156,8 @@ + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +@@ -17989,8 +19165,8 @@ + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } + hardcode_action_GCJ= + if test -n "$hardcode_libdir_flag_spec_GCJ" || \ + test -n "$runpath_var_GCJ" || \ +@@ -18014,8 +19190,8 @@ + # directories. + hardcode_action_GCJ=unsupported + fi +-echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +-echo "${ECHO_T}$hardcode_action_GCJ" >&6 ++{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 ++echo "${ECHO_T}$hardcode_action_GCJ" >&6; } + + if test "$hardcode_action_GCJ" = relink; then + # Fast installation is not supported +@@ -18435,7 +19611,7 @@ + fi + + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -18451,7 +19627,6 @@ + RC) + + +- + # Source file extension for RC test sources. + ac_ext=rc + +@@ -18916,7 +20091,7 @@ + fi + + +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +@@ -18983,8 +20158,8 @@ + + + +-echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 +-echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 ++echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6; } + if test "${ac_cv_c_bigendian+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19001,7 +20176,8 @@ + int + main () + { +-#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN ++#if ! (defined BYTE_ORDER && defined BIG_ENDIAN && defined LITTLE_ENDIAN \ ++ && BYTE_ORDER && BIG_ENDIAN && LITTLE_ENDIAN) + bogus endian macros + #endif + +@@ -19010,24 +20186,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19053,24 +20241,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19079,14 +20279,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_c_bigendian=no ++ ac_cv_c_bigendian=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-# It does not; compile a test program. ++ # It does not; compile a test program. + if test "$cross_compiling" = yes; then + # try to guess the endianness by grepping values into an object file + ac_cv_c_bigendian=unknown +@@ -19096,11 +20297,11 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; +-short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; ++short int ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; ++short int ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; + void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } +-short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; +-short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; ++short int ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; ++short int ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; + void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } + int + main () +@@ -19111,24 +20312,36 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19147,8 +20360,10 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -19156,27 +20371,41 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ ++$ac_includes_default + int + main () + { ++ + /* Are we little or big endian? From Harbison&Steele. */ + union + { +- long l; +- char c[sizeof (long)]; ++ long int l; ++ char c[sizeof (long int)]; + } u; + u.l = 1; +- exit (u.c[sizeof (long) - 1] == 1); ++ return u.c[sizeof (long int) - 1] == 1; ++ ++ ; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19189,13 +20418,16 @@ + ( exit $ac_status ) + ac_cv_c_bigendian=yes + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +-echo "${ECHO_T}$ac_cv_c_bigendian" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 ++echo "${ECHO_T}$ac_cv_c_bigendian" >&6; } + case $ac_cv_c_bigendian in + yes) + +@@ -19214,33 +20446,121 @@ + esac + + ++ ++ ++ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++ ++ ++ ++# Ask user for path to clucene-core stuff:. ++ ++# Check whether --with-clucene was given. ++if test "${with_clucene+set}" = set; then ++ withval=$with_clucene; ++fi ++ ++ ++#try some default locations ++if test -z "$with_clucene"; then ++ #use parent of this directory, and some common library paths ++ with_clucene=$(cd "../" && pwd) ++ with_clucene="$with_clucene /usr /usr/local" ++else ++ #use an absolute path ++ with_clucene=$(cd "$with_clucene" && pwd) ++fi ++clucene_set_failed= ++ ++{ echo "$as_me:$LINENO: checking how to include clucene" >&5 ++echo $ECHO_N "checking how to include clucene... $ECHO_C" >&6; } ++CLUCENE_CXXFLAGS= ++CLUCENE_LIBS= ++for flag in $with_clucene; do ++ if test -z "$clucene_set_failed"; then ++ if test -e "$flag/include/CLucene/StdHeader.h"; then ++ if test -e "$flag/lib/CLucene/clucene-config.h"; then ++ CLUCENE_LIBS="-L$flag/lib -lclucene" ++ CLUCENE_CXXFLAGS="-I$flag/include -I$flag/lib" ++ clucene_set_failed=$flag ++ fi ++ fi ++ fi ++ ++ if test -z "$clucene_set_failed"; then ++ if test -e "$flag/src/CLucene/StdHeader.h"; then ++ if test -e "$flag/src/libclucene.la"; then ++ CLUCENE_LIBS="-L$flag/src/ -lclucene" ++ CLUCENE_CXXFLAGS="-I$flag/src/" ++ clucene_set_failed=$flag/src/ ++ fi ++ fi ++ fi ++done ++ ++if test -z "$clucene_set_failed"; then ++ clucene_set_failed="true" ++ { echo "$as_me:$LINENO: result: \"failed\"" >&5 ++echo "${ECHO_T}\"failed\"" >&6; } ++else ++ { echo "$as_me:$LINENO: result: $clucene_set_failed" >&5 ++echo "${ECHO_T}$clucene_set_failed" >&6; } ++fi ++ ++if test "$clucene_set_failed" = "true"; then ++ { { echo "$as_me:$LINENO: error: You must call configure with the --with-clucene option ++ or you must compile this package from a subdirectory of the clucene core. ++ This tells configure where to find the CLucene Core library and headers. ++ e.g. --with-clucene=/usr/local or --with-clucene=/usr" >&5 ++echo "$as_me: error: You must call configure with the --with-clucene option ++ or you must compile this package from a subdirectory of the clucene core. ++ This tells configure where to find the CLucene Core library and headers. ++ e.g. --with-clucene=/usr/local or --with-clucene=/usr" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++ ++ ++ ++ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++ ++ ++ + # --------------------------------------------------------------------- + # With options + # --------------------------------------------------------------------- + +-# Check whether --with-zlib or --without-zlib was given. ++# Check whether --with-zlib was given. + if test "${with_zlib+set}" = set; then +- withval="$with_zlib" +- ++ withval=$with_zlib; + else + with_zlib=yes +-fi; ++fi + +-# Check whether --with-icu or --without-icu was given. +-if test "${with_icu+set}" = set; then +- withval="$with_icu" + ++# Check whether --with-icu was given. ++if test "${with_icu+set}" = set; then ++ withval=$with_icu; + else + with_icu=no +-fi; ++fi + +-# Check whether --with-conf or --without-conf was given. +-if test "${with_conf+set}" = set; then +- withval="$with_conf" + ++# Check whether --with-conf was given. ++if test "${with_conf+set}" = set; then ++ withval=$with_conf; + else + with_conf=yes +-fi; ++fi ++ + #AC_ARG_WITH(installmgr, + # AC_HELP_STRING([--with-installmgr],[build install manager support: + # curl=using libcurl, +@@ -19248,79 +20570,73 @@ + # internal=using internal ftplib + # (default=internal)]),,with_installmgr=internal) + +-# Check whether --with-curl or --without-curl was given. ++# Check whether --with-curl was given. + if test "${with_curl+set}" = set; then +- withval="$with_curl" +- ++ withval=$with_curl; + else + with_curl=yes +-fi; +- +-# Check whether --with-lucene or --without-lucene was given. +-if test "${with_lucene+set}" = set; then +- withval="$with_lucene" ++fi + +-else +- with_lucene=no +-fi; ++#AC_ARG_WITH(lucene, ++# AC_HELP_STRING([--with-lucene],[include lucene support for searching (default=no)]),,with_lucene=no) + + + # --------------------------------------------------------------------- + # Enable options + # --------------------------------------------------------------------- +-# Check whether --enable-debug or --disable-debug was given. ++# Check whether --enable-debug was given. + if test "${enable_debug+set}" = set; then +- enableval="$enable_debug" +- ++ enableval=$enable_debug; + else + enable_debug=no +-fi; +-# Check whether --enable-profile or --disable-profile was given. +-if test "${enable_profile+set}" = set; then +- enableval="$enable_profile" ++fi + ++# Check whether --enable-profile was given. ++if test "${enable_profile+set}" = set; then ++ enableval=$enable_profile; + else + enable_profile=no +-fi; +-# Check whether --enable-profilefn or --disable-profilefn was given. +-if test "${enable_profilefn+set}" = set; then +- enableval="$enable_profilefn" ++fi + ++# Check whether --enable-profilefn was given. ++if test "${enable_profilefn+set}" = set; then ++ enableval=$enable_profilefn; + else + enable_profilefn=no +-fi; +-# Check whether --enable-tests or --disable-tests was given. +-if test "${enable_tests+set}" = set; then +- enableval="$enable_tests" ++fi + ++# Check whether --enable-tests was given. ++if test "${enable_tests+set}" = set; then ++ enableval=$enable_tests; + else + enable_tests=no +-fi; +-# Check whether --enable-utilities or --disable-utilities was given. +-if test "${enable_utilities+set}" = set; then +- enableval="$enable_utilities" ++fi + ++# Check whether --enable-utilities was given. ++if test "${enable_utilities+set}" = set; then ++ enableval=$enable_utilities; + else + enable_utilities=yes +-fi; +-# Check whether --enable-examples or --disable-examples was given. +-if test "${enable_examples+set}" = set; then +- enableval="$enable_examples" ++fi + ++# Check whether --enable-examples was given. ++if test "${enable_examples+set}" = set; then ++ enableval=$enable_examples; + else + enable_examples=no +-fi; +-echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 +- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. ++fi ++ ++{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 ++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } ++ # Check whether --enable-maintainer-mode was given. + if test "${enable_maintainer_mode+set}" = set; then +- enableval="$enable_maintainer_mode" +- USE_MAINTAINER_MODE=$enableval ++ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval + else + USE_MAINTAINER_MODE=no +-fi; +- echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 ++fi ++ ++ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 ++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } + + + if test $USE_MAINTAINER_MODE = yes; then +@@ -19340,8 +20656,8 @@ + # --------------------------------------------------------------------- + if test x$with_zlib = xyes; then + +-echo "$as_me:$LINENO: checking for compress in -lz" >&5 +-echo $ECHO_N "checking for compress in -lz... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for compress in -lz" >&5 ++echo $ECHO_N "checking for compress in -lz... $ECHO_C" >&6; } + if test "${ac_cv_lib_z_compress+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19354,40 +20670,52 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char compress (); + int + main () + { +-compress (); ++return compress (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -19396,14 +20724,15 @@ + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_z_compress=no ++ ac_cv_lib_z_compress=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress" >&5 +-echo "${ECHO_T}$ac_cv_lib_z_compress" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress" >&5 ++echo "${ECHO_T}$ac_cv_lib_z_compress" >&6; } + if test $ac_cv_lib_z_compress = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBZ 1 +@@ -19426,21 +20755,21 @@ + + + +-# Check whether --with-cppunit-prefix or --without-cppunit-prefix was given. ++# Check whether --with-cppunit-prefix was given. + if test "${with_cppunit_prefix+set}" = set; then +- withval="$with_cppunit_prefix" +- cppunit_config_prefix="$withval" ++ withval=$with_cppunit_prefix; cppunit_config_prefix="$withval" + else + cppunit_config_prefix="" +-fi; ++fi + +-# Check whether --with-cppunit-exec-prefix or --without-cppunit-exec-prefix was given. ++ ++# Check whether --with-cppunit-exec-prefix was given. + if test "${with_cppunit_exec_prefix+set}" = set; then +- withval="$with_cppunit_exec_prefix" +- cppunit_config_exec_prefix="$withval" ++ withval=$with_cppunit_exec_prefix; cppunit_config_exec_prefix="$withval" + else + cppunit_config_exec_prefix="" +-fi; ++fi ++ + + if test x$cppunit_config_exec_prefix != x ; then + cppunit_config_args="$cppunit_config_args --exec-prefix=$cppunit_config_exec_prefix" +@@ -19457,8 +20786,8 @@ + + # Extract the first word of "cppunit-config", so it can be a program name with args. + set dummy cppunit-config; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_CPPUNIT_CONFIG+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19473,32 +20802,33 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_CPPUNIT_CONFIG="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_CPPUNIT_CONFIG" && ac_cv_path_CPPUNIT_CONFIG="no" + ;; + esac + fi + CPPUNIT_CONFIG=$ac_cv_path_CPPUNIT_CONFIG +- + if test -n "$CPPUNIT_CONFIG"; then +- echo "$as_me:$LINENO: result: $CPPUNIT_CONFIG" >&5 +-echo "${ECHO_T}$CPPUNIT_CONFIG" >&6 ++ { echo "$as_me:$LINENO: result: $CPPUNIT_CONFIG" >&5 ++echo "${ECHO_T}$CPPUNIT_CONFIG" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + cppunit_version_min=1.8.0 + +- echo "$as_me:$LINENO: checking for Cppunit - version >= $cppunit_version_min" >&5 +-echo $ECHO_N "checking for Cppunit - version >= $cppunit_version_min... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for Cppunit - version >= $cppunit_version_min" >&5 ++echo $ECHO_N "checking for Cppunit - version >= $cppunit_version_min... $ECHO_C" >&6; } + no_cppunit="" + if test "$CPPUNIT_CONFIG" = "no" ; then + no_cppunit=yes +@@ -19530,11 +20860,11 @@ + $cppunit_micro_version \>= $cppunit_micro_min ` + + if test "$cppunit_version_proper" = "1" ; then +- echo "$as_me:$LINENO: result: $cppunit_major_version.$cppunit_minor_version.$cppunit_micro_version" >&5 +-echo "${ECHO_T}$cppunit_major_version.$cppunit_minor_version.$cppunit_micro_version" >&6 ++ { echo "$as_me:$LINENO: result: $cppunit_major_version.$cppunit_minor_version.$cppunit_micro_version" >&5 ++echo "${ECHO_T}$cppunit_major_version.$cppunit_minor_version.$cppunit_micro_version" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + no_cppunit=yes + fi + fi +@@ -19571,8 +20901,8 @@ + use_pkgconfig=yes + # Extract the first word of "pkg-config", so it can be a program name with args. + set dummy pkg-config; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_PKG_CONFIG+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19587,28 +20917,29 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no" + ;; + esac + fi + PKG_CONFIG=$ac_cv_path_PKG_CONFIG +- + if test -n "$PKG_CONFIG"; then +- echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 +-echo "${ECHO_T}$PKG_CONFIG" >&6 ++ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ++echo "${ECHO_T}$PKG_CONFIG" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + if test x$PKG_CONFIG = xno ; then + { echo "$as_me:$LINENO: WARNING: *** pkg-config not found. See http://www.freedesktop.org/software/pkgconfig/" >&5 + echo "$as_me: WARNING: *** pkg-config not found. See http://www.freedesktop.org/software/pkgconfig/" >&2;} +@@ -19637,8 +20968,8 @@ + if test x$with_icu = xyes; then + # Extract the first word of "pkgdata", so it can be a program name with args. + set dummy pkgdata; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_PKGDATA+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19654,32 +20985,33 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PKGDATA="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_PKGDATA" && ac_cv_path_PKGDATA="/usr/sbin/pkgdata" + ;; + esac + fi + PKGDATA=$ac_cv_path_PKGDATA +- + if test -n "$PKGDATA"; then +- echo "$as_me:$LINENO: result: $PKGDATA" >&5 +-echo "${ECHO_T}$PKGDATA" >&6 ++ { echo "$as_me:$LINENO: result: $PKGDATA" >&5 ++echo "${ECHO_T}$PKGDATA" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + # Extract the first word of "genccode", so it can be a program name with args. + set dummy genccode; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_GENCCODE+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19695,32 +21027,33 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GENCCODE="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_GENCCODE" && ac_cv_path_GENCCODE="/usr/sbin/genccode" + ;; + esac + fi + GENCCODE=$ac_cv_path_GENCCODE +- + if test -n "$GENCCODE"; then +- echo "$as_me:$LINENO: result: $GENCCODE" >&5 +-echo "${ECHO_T}$GENCCODE" >&6 ++ { echo "$as_me:$LINENO: result: $GENCCODE" >&5 ++echo "${ECHO_T}$GENCCODE" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + # Extract the first word of "gencmn", so it can be a program name with args. + set dummy gencmn; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_GENCMN+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19736,32 +21069,33 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GENCMN="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_GENCMN" && ac_cv_path_GENCMN="/usr/sbin/gencmn" + ;; + esac + fi + GENCMN=$ac_cv_path_GENCMN +- + if test -n "$GENCMN"; then +- echo "$as_me:$LINENO: result: $GENCMN" >&5 +-echo "${ECHO_T}$GENCMN" >&6 ++ { echo "$as_me:$LINENO: result: $GENCMN" >&5 ++echo "${ECHO_T}$GENCMN" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + # Extract the first word of "genrb", so it can be a program name with args. + set dummy genrb; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_GENRB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19777,33 +21111,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GENRB="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_GENRB" && ac_cv_path_GENRB="/usr/sbin/genrb" + ;; + esac + fi + GENRB=$ac_cv_path_GENRB +- + if test -n "$GENRB"; then +- echo "$as_me:$LINENO: result: $GENRB" >&5 +-echo "${ECHO_T}$GENRB" >&6 ++ { echo "$as_me:$LINENO: result: $GENRB" >&5 ++echo "${ECHO_T}$GENRB" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + ++ + # Extract the first word of "icu-config", so it can be a program name with args. + set dummy icu-config; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_ICU_CONFIG+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19818,28 +21153,29 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ICU_CONFIG="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_ICU_CONFIG" && ac_cv_path_ICU_CONFIG="no" + ;; + esac + fi + ICU_CONFIG=$ac_cv_path_ICU_CONFIG +- + if test -n "$ICU_CONFIG"; then +- echo "$as_me:$LINENO: result: $ICU_CONFIG" >&5 +-echo "${ECHO_T}$ICU_CONFIG" >&6 ++ { echo "$as_me:$LINENO: result: $ICU_CONFIG" >&5 ++echo "${ECHO_T}$ICU_CONFIG" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + # The icu-config script was new in icu 2.2 + if test "$ICU_CONFIG" = "no" ; then + echo "*** The icu-config script installed by icu could not be found" +@@ -19903,8 +21239,8 @@ + if test x$with_curl = xyes; then + # Extract the first word of "curl-config", so it can be a program name with args. + set dummy curl-config; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_CURL_CONFIG+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -19919,28 +21255,29 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_CURL_CONFIG="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_path_CURL_CONFIG" && ac_cv_path_CURL_CONFIG="no" + ;; + esac + fi + CURL_CONFIG=$ac_cv_path_CURL_CONFIG +- + if test -n "$CURL_CONFIG"; then +- echo "$as_me:$LINENO: result: $CURL_CONFIG" >&5 +-echo "${ECHO_T}$CURL_CONFIG" >&6 ++ { echo "$as_me:$LINENO: result: $CURL_CONFIG" >&5 ++echo "${ECHO_T}$CURL_CONFIG" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + if test "$CURL_CONFIG" = "no" ; then + echo "*** The curl-config script installed by curl could not be found" + echo "*** compiling without libcurl support" +@@ -19959,13 +21296,13 @@ + # --------------------------------------------------------------------- + + #FIXME: always make lucene available without checking for lib and headers +-if test x$with_lucene = xyes; then ++if test x$with_clucene = xyes; then + echo "lucene found - lucene searching options available" +- LUCENE_AM_CFLAGS="" +- LUCENE_LIBS="-lclucene" +- AM_CXXFLAGS="$AM_CXXFLAGS -DUSELUCENE" ++# LUCENE_AM_CFLAGS="" ++# LUCENE_LIBS="-lclucene" ++ AM_CXXFLAGS="$AM_CXXFLAGS $CLUCENE_CXXFLAGS -DUSELUCENE" + AM_CFLAGS="$AM_CFLAGS -DUSELUCENE" +- LIBS="$LIBS $LUCENE_LIBS" ++ LIBS="$LIBS $CLUCENE_LIBS" + fi + + +@@ -19990,7 +21327,7 @@ + + + +- ++#AC_SUBST(LUCENE_LIBS) + + + +@@ -20033,7 +21370,7 @@ + + + +-if test x$with_lucene = xyes; then ++if test x$with_clucene = xyes; then + USELUCENE_TRUE= + USELUCENE_FALSE='#' + else +@@ -20160,7 +21497,7 @@ + # --------------------------------------------------------------------- + # Final output + # --------------------------------------------------------------------- +- ac_config_files="$ac_config_files Makefile lib/Makefile tests/Makefile tests/cppunit/Makefile utilities/Makefile examples/Makefile examples/cmdline/Makefile utilities/diatheke/Makefile icu/Makefile sword.pc sword.spec" ++ac_config_files="$ac_config_files Makefile lib/Makefile tests/Makefile tests/cppunit/Makefile utilities/Makefile examples/Makefile examples/cmdline/Makefile utilities/diatheke/Makefile icu/Makefile sword.pc sword.spec" + + cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure +@@ -20180,39 +21517,58 @@ + + # The following way of writing the cache mishandles newlines in values, + # but we know of no workaround that is simple, portable, and efficient. +-# So, don't put newlines in cache variables' values. ++# So, we kill variables containing newlines. + # Ultrix sh set writes to stderr and can't be redirected directly, + # and sets the high bit in the cache file unless we assign to the vars. +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ + (set) 2>&1 | +- case `(ac_space=' '; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +- ;; ++ ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} | ++ esac | ++ sort ++) | + sed ' ++ /^ac_cv_env_/b end + t clear +- : clear ++ :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end +- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ +- : end' >>confcache +-if diff $cache_file confcache >/dev/null 2>&1; then :; else +- if test -w $cache_file; then +- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else +- echo "not updating unwritable cache $cache_file" ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi + rm -f confcache +@@ -20221,32 +21577,18 @@ + # Let make expand exec_prefix. + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +-# trailing colons and then remove the whole line if VPATH becomes empty +-# (actually we leave an empty line to preserve line numbers). +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/; +-s/:*\${srcdir}:*/:/; +-s/:*@srcdir@:*/:/; +-s/^\([^=]*=[ ]*\):*/\1/; +-s/:*$//; +-s/^[^=]*=[ ]*$//; +-}' +-fi +- + DEFS=-DHAVE_CONFIG_H + + ac_libobjs= + ac_ltlibobjs= + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. +- ac_i=`echo "$ac_i" | +- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` +- # 2. Add them. +- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + done + LIBOBJS=$ac_libobjs + +@@ -20417,11 +21759,35 @@ + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 + DUALCASE=1; export DUALCASE # for MKS sh + ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh ++fi ++ + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +@@ -20430,8 +21796,43 @@ + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -20445,18 +21846,19 @@ + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -20464,159 +21866,120 @@ + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + +- +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits +- +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh +-fi ++# CDPATH. ++$as_unset CDPATH + + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in +- /*) +- if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || +- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -20625,7 +21988,19 @@ + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++# Find out whether ``test -x'' works. Don't use a zero-byte file, as ++# systems may use methods other than mode bits to determine executability. ++cat >conf$$.file <<_ASEOF ++#! /bin/sh ++exit 0 ++_ASEOF ++chmod +x conf$$.file ++if test -x conf$$.file >/dev/null 2>&1; then ++ as_executable_p="test -x" ++else ++ as_executable_p=: ++fi ++rm -f conf$$.file + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -20634,31 +22009,14 @@ + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- + exec 6>&1 + +-# Open the log real soon, to keep \$[0] and so on meaningful, and to ++# Save the log message, to keep $[0] and so on meaningful, and to + # report actual input values of CONFIG_FILES etc. instead of their +-# values after options handling. Logging --version etc. is OK. +-exec 5>>config.log +-{ +- echo +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +-## Running $as_me. ## +-_ASBOX +-} >&5 +-cat >&5 <<_CSEOF +- ++# values after options handling. ++ac_log=" + This file was extended by sword $as_me 1.5.9, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.60a. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -20666,30 +22024,20 @@ + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +-_CSEOF +-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +-echo >&5 ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ + _ACEOF + ++cat >>$CONFIG_STATUS <<_ACEOF + # Files that config.status was made for. +-if test -n "$ac_config_files"; then +- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_headers"; then +- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +-fi ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" + +-if test -n "$ac_config_links"; then +- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_commands"; then +- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +-fi ++_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +- + ac_cs_usage="\ + \`$as_me' instantiates files from templates according to the + current configuration. +@@ -20697,7 +22045,7 @@ + Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit +- -V, --version print version number, then exit ++ -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions +@@ -20716,19 +22064,21 @@ + $config_commands + + Report bugs to ." +-_ACEOF + ++_ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + ac_cs_version="\\ + sword config.status 1.5.9 +-configured by $0, generated by GNU Autoconf 2.59, +- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" ++configured by $0, generated by GNU Autoconf 2.60a, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 2006 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." +-srcdir=$srcdir +-INSTALL="$INSTALL" ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +@@ -20739,39 +22089,24 @@ + do + case $1 in + --*=*) +- ac_option=`expr "x$1" : 'x\([^=]*\)='` +- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; +- -*) ++ *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; +- *) # This is not an option, so the user has probably given explicit +- # arguments. +- ac_option=$1 +- ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; +- --version | --vers* | -V ) +- echo "$ac_cs_version"; exit 0 ;; +- --he | --h) +- # Conflict between --help and --header +- { { echo "$as_me:$LINENO: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2;} +- { (exit 1); exit 1; }; };; +- --help | --hel | -h ) +- echo "$ac_cs_usage"; exit 0 ;; +- --debug | --d* | -d ) ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift +@@ -20781,18 +22116,24 @@ + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. +- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2;} ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + +- *) ac_config_targets="$ac_config_targets $1" ;; ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; + + esac + shift +@@ -20808,47 +22149,59 @@ + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + if \$ac_cs_recheck; then +- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 +- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + fi + + _ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ echo "$ac_log" ++} >&5 + ++_ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + # +-# INIT-COMMANDS section. ++# INIT-COMMANDS + # +- + AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + _ACEOF + +- +- + cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# Handling of arguments. + for ac_config_target in $ac_config_targets + do +- case "$ac_config_target" in +- # Handling of arguments. +- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; +- "lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; +- "tests/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; +- "tests/cppunit/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/cppunit/Makefile" ;; +- "utilities/Makefile" ) CONFIG_FILES="$CONFIG_FILES utilities/Makefile" ;; +- "examples/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; +- "examples/cmdline/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/cmdline/Makefile" ;; +- "utilities/diatheke/Makefile" ) CONFIG_FILES="$CONFIG_FILES utilities/diatheke/Makefile" ;; +- "icu/Makefile" ) CONFIG_FILES="$CONFIG_FILES icu/Makefile" ;; +- "sword.pc" ) CONFIG_FILES="$CONFIG_FILES sword.pc" ;; +- "sword.spec" ) CONFIG_FILES="$CONFIG_FILES sword.spec" ;; +- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; +- "include/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/config.h" ;; ++ case $ac_config_target in ++ "include/config.h") CONFIG_HEADERS="$CONFIG_HEADERS include/config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; ++ "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; ++ "tests/cppunit/Makefile") CONFIG_FILES="$CONFIG_FILES tests/cppunit/Makefile" ;; ++ "utilities/Makefile") CONFIG_FILES="$CONFIG_FILES utilities/Makefile" ;; ++ "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; ++ "examples/cmdline/Makefile") CONFIG_FILES="$CONFIG_FILES examples/cmdline/Makefile" ;; ++ "utilities/diatheke/Makefile") CONFIG_FILES="$CONFIG_FILES utilities/diatheke/Makefile" ;; ++ "icu/Makefile") CONFIG_FILES="$CONFIG_FILES icu/Makefile" ;; ++ "sword.pc") CONFIG_FILES="$CONFIG_FILES sword.pc" ;; ++ "sword.spec") CONFIG_FILES="$CONFIG_FILES sword.spec" ;; ++ + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 + echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac + done + ++ + # If the user did not use the arguments to specify the items to instantiate, + # then the envvar interface is used. Set only those that are not. + # We use the long form for the default assignment because of an extremely +@@ -20860,669 +22213,655 @@ + fi + + # Have a temporary directory for convenience. Make it in the build tree +-# simply because there is no reason to put it here, and in addition, ++# simply because there is no reason against having it here, and in addition, + # creating and moving files from /tmp can sometimes cause problems. +-# Create a temporary directory, and hook for its removal unless debugging. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. + $debug || + { +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 + } +- + # Create a (secure) tmp directory for tmp files. + + { +- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" + } || + { +- tmp=./confstat$$-$RANDOM +- (umask 077 && mkdir $tmp) ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") + } || + { + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } + } + +-_ACEOF +- +-cat >>$CONFIG_STATUS <<_ACEOF +- + # +-# CONFIG_FILES section. ++# Set up the sed scripts for CONFIG_FILES section. + # + + # No need to generate the scripts if there are no CONFIG_FILES. + # This happens for instance when ./config.status config.h +-if test -n "\$CONFIG_FILES"; then +- # Protect against being on the right side of a sed subst in config.status. +- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; +- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +-s,@SHELL@,$SHELL,;t t +-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +-s,@exec_prefix@,$exec_prefix,;t t +-s,@prefix@,$prefix,;t t +-s,@program_transform_name@,$program_transform_name,;t t +-s,@bindir@,$bindir,;t t +-s,@sbindir@,$sbindir,;t t +-s,@libexecdir@,$libexecdir,;t t +-s,@datadir@,$datadir,;t t +-s,@sysconfdir@,$sysconfdir,;t t +-s,@sharedstatedir@,$sharedstatedir,;t t +-s,@localstatedir@,$localstatedir,;t t +-s,@libdir@,$libdir,;t t +-s,@includedir@,$includedir,;t t +-s,@oldincludedir@,$oldincludedir,;t t +-s,@infodir@,$infodir,;t t +-s,@mandir@,$mandir,;t t +-s,@build_alias@,$build_alias,;t t +-s,@host_alias@,$host_alias,;t t +-s,@target_alias@,$target_alias,;t t +-s,@DEFS@,$DEFS,;t t +-s,@ECHO_C@,$ECHO_C,;t t +-s,@ECHO_N@,$ECHO_N,;t t +-s,@ECHO_T@,$ECHO_T,;t t +-s,@LIBS@,$LIBS,;t t +-s,@build@,$build,;t t +-s,@build_cpu@,$build_cpu,;t t +-s,@build_vendor@,$build_vendor,;t t +-s,@build_os@,$build_os,;t t +-s,@host@,$host,;t t +-s,@host_cpu@,$host_cpu,;t t +-s,@host_vendor@,$host_vendor,;t t +-s,@host_os@,$host_os,;t t +-s,@target@,$target,;t t +-s,@target_cpu@,$target_cpu,;t t +-s,@target_vendor@,$target_vendor,;t t +-s,@target_os@,$target_os,;t t +-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +-s,@INSTALL_DATA@,$INSTALL_DATA,;t t +-s,@CYGPATH_W@,$CYGPATH_W,;t t +-s,@PACKAGE@,$PACKAGE,;t t +-s,@VERSION@,$VERSION,;t t +-s,@ACLOCAL@,$ACLOCAL,;t t +-s,@AUTOCONF@,$AUTOCONF,;t t +-s,@AUTOMAKE@,$AUTOMAKE,;t t +-s,@AUTOHEADER@,$AUTOHEADER,;t t +-s,@MAKEINFO@,$MAKEINFO,;t t +-s,@install_sh@,$install_sh,;t t +-s,@STRIP@,$STRIP,;t t +-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t +-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t +-s,@mkdir_p@,$mkdir_p,;t t +-s,@AWK@,$AWK,;t t +-s,@SET_MAKE@,$SET_MAKE,;t t +-s,@am__leading_dot@,$am__leading_dot,;t t +-s,@AMTAR@,$AMTAR,;t t +-s,@am__tar@,$am__tar,;t t +-s,@am__untar@,$am__untar,;t t +-s,@CC@,$CC,;t t +-s,@CFLAGS@,$CFLAGS,;t t +-s,@LDFLAGS@,$LDFLAGS,;t t +-s,@CPPFLAGS@,$CPPFLAGS,;t t +-s,@ac_ct_CC@,$ac_ct_CC,;t t +-s,@EXEEXT@,$EXEEXT,;t t +-s,@OBJEXT@,$OBJEXT,;t t +-s,@DEPDIR@,$DEPDIR,;t t +-s,@am__include@,$am__include,;t t +-s,@am__quote@,$am__quote,;t t +-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t +-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t +-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t +-s,@CCDEPMODE@,$CCDEPMODE,;t t +-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t +-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t +-s,@CXX@,$CXX,;t t +-s,@CXXFLAGS@,$CXXFLAGS,;t t +-s,@ac_ct_CXX@,$ac_ct_CXX,;t t +-s,@CXXDEPMODE@,$CXXDEPMODE,;t t +-s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t +-s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t +-s,@EGREP@,$EGREP,;t t +-s,@LN_S@,$LN_S,;t t +-s,@ECHO@,$ECHO,;t t +-s,@AR@,$AR,;t t +-s,@ac_ct_AR@,$ac_ct_AR,;t t +-s,@RANLIB@,$RANLIB,;t t +-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +-s,@DLLTOOL@,$DLLTOOL,;t t +-s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t +-s,@AS@,$AS,;t t +-s,@ac_ct_AS@,$ac_ct_AS,;t t +-s,@OBJDUMP@,$OBJDUMP,;t t +-s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t +-s,@CPP@,$CPP,;t t +-s,@CXXCPP@,$CXXCPP,;t t +-s,@F77@,$F77,;t t +-s,@FFLAGS@,$FFLAGS,;t t +-s,@ac_ct_F77@,$ac_ct_F77,;t t +-s,@LIBTOOL@,$LIBTOOL,;t t +-s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t +-s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t +-s,@MAINT@,$MAINT,;t t +-s,@CPPUNIT_CONFIG@,$CPPUNIT_CONFIG,;t t +-s,@CPPUNIT_CFLAGS@,$CPPUNIT_CFLAGS,;t t +-s,@CPPUNIT_LIBS@,$CPPUNIT_LIBS,;t t +-s,@HAVE_CPPUNIT_TRUE@,$HAVE_CPPUNIT_TRUE,;t t +-s,@HAVE_CPPUNIT_FALSE@,$HAVE_CPPUNIT_FALSE,;t t +-s,@PKG_CONFIG@,$PKG_CONFIG,;t t +-s,@PKGDATA@,$PKGDATA,;t t +-s,@GENCCODE@,$GENCCODE,;t t +-s,@GENCMN@,$GENCMN,;t t +-s,@GENRB@,$GENRB,;t t +-s,@ICU_CONFIG@,$ICU_CONFIG,;t t +-s,@CURL_CONFIG@,$CURL_CONFIG,;t t +-s,@with_zlib@,$with_zlib,;t t +-s,@with_icu@,$with_icu,;t t +-s,@with_conf@,$with_conf,;t t +-s,@dir_confdef@,$dir_confdef,;t t +-s,@CURL_AM_CFLAGS@,$CURL_AM_CFLAGS,;t t +-s,@CURL_LIBS@,$CURL_LIBS,;t t +-s,@LUCENE_LIBS@,$LUCENE_LIBS,;t t +-s,@ICU_LIBS@,$ICU_LIBS,;t t +-s,@ICU_IOLIBS@,$ICU_IOLIBS,;t t +-s,@ICU_VER@,$ICU_VER,;t t +-s,@XML_LIBS@,$XML_LIBS,;t t +-s,@enable_debug@,$enable_debug,;t t +-s,@enable_profile@,$enable_profile,;t t +-s,@AM_CXXFLAGS@,$AM_CXXFLAGS,;t t +-s,@target_system@,$target_system,;t t +-s,@target_mingw32@,$target_mingw32,;t t +-s,@MINGW_TRUE@,$MINGW_TRUE,;t t +-s,@MINGW_FALSE@,$MINGW_FALSE,;t t +-s,@ICU_TRUE@,$ICU_TRUE,;t t +-s,@ICU_FALSE@,$ICU_FALSE,;t t +-s,@USELUCENE_TRUE@,$USELUCENE_TRUE,;t t +-s,@USELUCENE_FALSE@,$USELUCENE_FALSE,;t t +-s,@ICUSWORD_TRUE@,$ICUSWORD_TRUE,;t t +-s,@ICUSWORD_FALSE@,$ICUSWORD_FALSE,;t t +-s,@ZLIB_TRUE@,$ZLIB_TRUE,;t t +-s,@ZLIB_FALSE@,$ZLIB_FALSE,;t t +-s,@INSTCONF_TRUE@,$INSTCONF_TRUE,;t t +-s,@INSTCONF_FALSE@,$INSTCONF_FALSE,;t t +-s,@INSTALLMGR_TRUE@,$INSTALLMGR_TRUE,;t t +-s,@INSTALLMGR_FALSE@,$INSTALLMGR_FALSE,;t t +-s,@WITHCURL_TRUE@,$WITHCURL_TRUE,;t t +-s,@WITHCURL_FALSE@,$WITHCURL_FALSE,;t t +-s,@INTERNALFTPLIB_TRUE@,$INTERNALFTPLIB_TRUE,;t t +-s,@INTERNALFTPLIB_FALSE@,$INTERNALFTPLIB_FALSE,;t t +-s,@CONFDEF_TRUE@,$CONFDEF_TRUE,;t t +-s,@CONFDEF_FALSE@,$CONFDEF_FALSE,;t t +-s,@USE_PKGCONF_TRUE@,$USE_PKGCONF_TRUE,;t t +-s,@USE_PKGCONF_FALSE@,$USE_PKGCONF_FALSE,;t t +-s,@BUILDTESTS_TRUE@,$BUILDTESTS_TRUE,;t t +-s,@BUILDTESTS_FALSE@,$BUILDTESTS_FALSE,;t t +-s,@BUILDUTILS_TRUE@,$BUILDUTILS_TRUE,;t t +-s,@BUILDUTILS_FALSE@,$BUILDUTILS_FALSE,;t t +-s,@BUILDEXAMPLES_TRUE@,$BUILDEXAMPLES_TRUE,;t t +-s,@BUILDEXAMPLES_FALSE@,$BUILDEXAMPLES_FALSE,;t t +-s,@LIBOBJS@,$LIBOBJS,;t t +-s,@LTLIBOBJS@,$LTLIBOBJS,;t t +-CEOF +- +-_ACEOF +- +- cat >>$CONFIG_STATUS <<\_ACEOF +- # Split the substitutions into bite-sized pieces for seds with +- # small command number limits, like on Digital OSF/1 and HP-UX. +- ac_max_sed_lines=48 +- ac_sed_frag=1 # Number of current file. +- ac_beg=1 # First line for current file. +- ac_end=$ac_max_sed_lines # Line after last line for current file. +- ac_more_lines=: +- ac_sed_cmds= +- while $ac_more_lines; do +- if test $ac_beg -gt 1; then +- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- else +- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- fi +- if test ! -s $tmp/subs.frag; then +- ac_more_lines=false +- else +- # The purpose of the label and of the branching condition is to +- # speed up the sed processing (if there are no `@' at all, there +- # is no need to browse any of the substitutions). +- # These are the two extra sed commands mentioned above. +- (echo ':t +- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" +- else +- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" +- fi +- ac_sed_frag=`expr $ac_sed_frag + 1` +- ac_beg=$ac_end +- ac_end=`expr $ac_end + $ac_max_sed_lines` +- fi +- done +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds=cat ++if test -n "$CONFIG_FILES"; then ++ ++_ACEOF ++ ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++target!$target$ac_delim ++target_cpu!$target_cpu$ac_delim ++target_vendor!$target_vendor$ac_delim ++target_os!$target_os$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++CYGPATH_W!$CYGPATH_W$ac_delim ++PACKAGE!$PACKAGE$ac_delim ++VERSION!$VERSION$ac_delim ++ACLOCAL!$ACLOCAL$ac_delim ++AUTOCONF!$AUTOCONF$ac_delim ++AUTOMAKE!$AUTOMAKE$ac_delim ++AUTOHEADER!$AUTOHEADER$ac_delim ++MAKEINFO!$MAKEINFO$ac_delim ++install_sh!$install_sh$ac_delim ++STRIP!$STRIP$ac_delim ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim ++mkdir_p!$mkdir_p$ac_delim ++AWK!$AWK$ac_delim ++SET_MAKE!$SET_MAKE$ac_delim ++am__leading_dot!$am__leading_dot$ac_delim ++AMTAR!$AMTAR$ac_delim ++am__tar!$am__tar$ac_delim ++am__untar!$am__untar$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++DEPDIR!$DEPDIR$ac_delim ++am__include!$am__include$ac_delim ++am__quote!$am__quote$ac_delim ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim ++CCDEPMODE!$CCDEPMODE$ac_delim ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim ++CXX!$CXX$ac_delim ++CXXFLAGS!$CXXFLAGS$ac_delim ++ac_ct_CXX!$ac_ct_CXX$ac_delim ++CXXDEPMODE!$CXXDEPMODE$ac_delim ++am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim ++am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++LN_S!$LN_S$ac_delim ++ECHO!$ECHO$ac_delim ++AR!$AR$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +-fi # test -n "$CONFIG_FILES" ++done + ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++RANLIB!$RANLIB$ac_delim ++DLLTOOL!$DLLTOOL$ac_delim ++AS!$AS$ac_delim ++OBJDUMP!$OBJDUMP$ac_delim ++CPP!$CPP$ac_delim ++CXXCPP!$CXXCPP$ac_delim ++F77!$F77$ac_delim ++FFLAGS!$FFLAGS$ac_delim ++ac_ct_F77!$ac_ct_F77$ac_delim ++LIBTOOL!$LIBTOOL$ac_delim ++CLUCENE_LIBS!$CLUCENE_LIBS$ac_delim ++CLUCENE_CXXFLAGS!$CLUCENE_CXXFLAGS$ac_delim ++MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim ++MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim ++MAINT!$MAINT$ac_delim ++CPPUNIT_CONFIG!$CPPUNIT_CONFIG$ac_delim ++CPPUNIT_CFLAGS!$CPPUNIT_CFLAGS$ac_delim ++CPPUNIT_LIBS!$CPPUNIT_LIBS$ac_delim ++HAVE_CPPUNIT_TRUE!$HAVE_CPPUNIT_TRUE$ac_delim ++HAVE_CPPUNIT_FALSE!$HAVE_CPPUNIT_FALSE$ac_delim ++PKG_CONFIG!$PKG_CONFIG$ac_delim ++PKGDATA!$PKGDATA$ac_delim ++GENCCODE!$GENCCODE$ac_delim ++GENCMN!$GENCMN$ac_delim ++GENRB!$GENRB$ac_delim ++ICU_CONFIG!$ICU_CONFIG$ac_delim ++CURL_CONFIG!$CURL_CONFIG$ac_delim ++with_zlib!$with_zlib$ac_delim ++with_icu!$with_icu$ac_delim ++with_conf!$with_conf$ac_delim ++dir_confdef!$dir_confdef$ac_delim ++CURL_AM_CFLAGS!$CURL_AM_CFLAGS$ac_delim ++CURL_LIBS!$CURL_LIBS$ac_delim ++ICU_LIBS!$ICU_LIBS$ac_delim ++ICU_IOLIBS!$ICU_IOLIBS$ac_delim ++ICU_VER!$ICU_VER$ac_delim ++XML_LIBS!$XML_LIBS$ac_delim ++enable_debug!$enable_debug$ac_delim ++enable_profile!$enable_profile$ac_delim ++AM_CXXFLAGS!$AM_CXXFLAGS$ac_delim ++target_system!$target_system$ac_delim ++target_mingw32!$target_mingw32$ac_delim ++MINGW_TRUE!$MINGW_TRUE$ac_delim ++MINGW_FALSE!$MINGW_FALSE$ac_delim ++ICU_TRUE!$ICU_TRUE$ac_delim ++ICU_FALSE!$ICU_FALSE$ac_delim ++USELUCENE_TRUE!$USELUCENE_TRUE$ac_delim ++USELUCENE_FALSE!$USELUCENE_FALSE$ac_delim ++ICUSWORD_TRUE!$ICUSWORD_TRUE$ac_delim ++ICUSWORD_FALSE!$ICUSWORD_FALSE$ac_delim ++ZLIB_TRUE!$ZLIB_TRUE$ac_delim ++ZLIB_FALSE!$ZLIB_FALSE$ac_delim ++INSTCONF_TRUE!$INSTCONF_TRUE$ac_delim ++INSTCONF_FALSE!$INSTCONF_FALSE$ac_delim ++INSTALLMGR_TRUE!$INSTALLMGR_TRUE$ac_delim ++INSTALLMGR_FALSE!$INSTALLMGR_FALSE$ac_delim ++WITHCURL_TRUE!$WITHCURL_TRUE$ac_delim ++WITHCURL_FALSE!$WITHCURL_FALSE$ac_delim ++INTERNALFTPLIB_TRUE!$INTERNALFTPLIB_TRUE$ac_delim ++INTERNALFTPLIB_FALSE!$INTERNALFTPLIB_FALSE$ac_delim ++CONFDEF_TRUE!$CONFDEF_TRUE$ac_delim ++CONFDEF_FALSE!$CONFDEF_FALSE$ac_delim ++USE_PKGCONF_TRUE!$USE_PKGCONF_TRUE$ac_delim ++USE_PKGCONF_FALSE!$USE_PKGCONF_FALSE$ac_delim ++BUILDTESTS_TRUE!$BUILDTESTS_TRUE$ac_delim ++BUILDTESTS_FALSE!$BUILDTESTS_FALSE$ac_delim ++BUILDUTILS_TRUE!$BUILDUTILS_TRUE$ac_delim ++BUILDUTILS_FALSE!$BUILDUTILS_FALSE$ac_delim ++BUILDEXAMPLES_TRUE!$BUILDEXAMPLES_TRUE$ac_delim ++BUILDEXAMPLES_FALSE!$BUILDEXAMPLES_FALSE$ac_delim ++LIBOBJS!$LIBOBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim + _ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 72; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof ++_ACEOF ++ ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ + cat >>$CONFIG_STATUS <<\_ACEOF +-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++fi # test -n "$CONFIG_FILES" ++ ++ ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done + +- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. +- ac_dir=`(dirname "$ac_file") 2>/dev/null || ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; ++ esac ++ ++ ac_dir=`$as_dirname -- "$ac_file" || + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || + echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || + echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac + ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; +- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac ++_ACEOF + +- if test x"$ac_file" != x-; then +- { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- rm -f "$ac_file" +- fi +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- configure_input= +- else +- configure_input="$ac_file. " +- fi +- configure_input=$configure_input"Generated from `echo $ac_file_in | +- sed 's,.*/,,'` by configure." +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub + $extrasub + _ACEOF + cat >>$CONFIG_STATUS <<\_ACEOF + :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s,@configure_input@,$configure_input,;t t +-s,@srcdir@,$ac_srcdir,;t t +-s,@abs_srcdir@,$ac_abs_srcdir,;t t +-s,@top_srcdir@,$ac_top_srcdir,;t t +-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +-s,@builddir@,$ac_builddir,;t t +-s,@abs_builddir@,$ac_abs_builddir,;t t +-s,@top_builddir@,$ac_top_builddir,;t t +-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +-s,@INSTALL@,$ac_INSTALL,;t t +-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out +- rm -f $tmp/stdin +- if test x"$ac_file" != x-; then +- mv $tmp/out $ac_file +- else +- cat $tmp/out +- rm -f $tmp/out +- fi ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} + +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- +-# +-# CONFIG_HEADER section. +-# +- +-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +-# NAME is the cpp macro being defined and VALUE is the value it is being given. +-# +-# ac_d sets the value in "#define NAME VALUE" lines. +-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +-ac_dB='[ ].*$,\1#\2' +-ac_dC=' ' +-ac_dD=',;t' +-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +-ac_uB='$,\1#\2define\3' +-ac_uC=' ' +-ac_uD=',;t' +- +-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ++ rm -f "$tmp/stdin" + case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac +- +- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- # Do quote $f, to prevent DOS paths from being IFS'd. +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +- # Remove the trailing spaces. +- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in +- ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # + _ACEOF + +-# Transform confdefs.h into two sed scripts, `conftest.defines' and +-# `conftest.undefs', that substitutes the proper values into +-# config.h.in to produce config.h. The first handles `#define' +-# templates, and the second `#undef' templates. +-# And first: Protect against being on the right side of a sed subst in +-# config.status. Protect against being in an unquoted here document +-# in config.status. +-rm -f conftest.defines conftest.undefs +-# Using a here document instead of a string reduces the quoting nightmare. +-# Putting comments in sed scripts is not portable. +-# +-# `end' is used to avoid that the second main sed command (meant for +-# 0-ary CPP macros) applies to n-ary macro definitions. +-# See the Autoconf documentation for `clear'. +-cat >confdef2sed.sed <<\_ACEOF +-s/[\\&,]/\\&/g +-s,[\\$`],\\&,g +-t clear +-: clear +-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +-t end +-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +-: end +-_ACEOF +-# If some macros were called several times there might be several times +-# the same #defines, which is useless. Nevertheless, we may not want to +-# sort them, since we want the *last* AC-DEFINE to be honored. +-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +-rm -f confdef2sed.sed ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' ++ ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines + +-# This sed command replaces #undef with comments. This is necessary, for ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for + # example, in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. +-cat >>conftest.undefs <<\_ACEOF +-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +-_ACEOF ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' + +-# Break up conftest.defines because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +-echo ' :' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.defines >/dev/null ++while : + do +- # Write a limited-size here document to $tmp/defines.sed. +- echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#define' lines. +- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def ++_ACEOF ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF +- sed -f $tmp/defines.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break + rm -f conftest.defines + mv conftest.tail conftest.defines + done +-rm -f conftest.defines +-echo ' fi # grep' >>$CONFIG_STATUS +-echo >>$CONFIG_STATUS +- +-# Break up conftest.undefs because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.undefs >/dev/null +-do +- # Write a limited-size here document to $tmp/undefs.sed. +- echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#undef' +- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS +- echo 'CEOF +- sed -f $tmp/undefs.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail +- rm -f conftest.undefs +- mv conftest.tail conftest.undefs +-done +-rm -f conftest.undefs ++rm -f conftest.defines conftest.tail + ++echo "ac_result=$ac_in" >>$CONFIG_STATUS + cat >>$CONFIG_STATUS <<\_ACEOF +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- echo "/* Generated by configure. */" >$tmp/config.h +- else +- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h +- fi +- cat $tmp/in >>$tmp/config.h +- rm -f $tmp/in + if test x"$ac_file" != x-; then +- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 + echo "$as_me: $ac_file is unchanged" >&6;} + else +- ac_dir=`(dirname "$ac_file") 2>/dev/null || +-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X\(//\)[^/]' \| \ +- X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- + rm -f $ac_file +- mv $tmp/config.h $ac_file ++ mv "$tmp/config.h" $ac_file + fi + else +- cat $tmp/config.h +- rm -f $tmp/config.h ++ echo "/* $configure_input */" ++ cat "$ac_result" + fi ++ rm -f "$tmp/out12" + # Compute $ac_file's index in $config_headers. + _am_stamp_count=1 + for _am_header in $config_headers :; do +@@ -21533,135 +22872,39 @@ + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac + done +-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || ++echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || + $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X$ac_file : 'X\(//\)[^/]' \| \ + X$ac_file : 'X\(//\)$' \| \ +- X$ac_file : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X$ac_file : 'X\(/\)' \| . 2>/dev/null || + echo X$ac_file | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'`/stamp-h$_am_stamp_count +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- +-# +-# CONFIG_COMMANDS section. +-# +-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue +- ac_dest=`echo "$ac_file" | sed 's,:.*,,'` +- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_dir=`(dirname "$ac_dest") 2>/dev/null || +-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_dest" : 'X\(//\)[^/]' \| \ +- X"$ac_dest" : 'X\(//\)$' \| \ +- X"$ac_dest" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_dest" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- +- ac_builddir=. +- +-if test "$ac_dir" != .; then +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi +- +-case $srcdir in +- .) # No --srcdir option. We are building in place. +- ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. +- ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac + + +- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 +-echo "$as_me: executing $ac_dest commands" >&6;} +- case $ac_dest in +- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. +@@ -21671,18 +22914,29 @@ + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then +- dirpart=`(dirname "$mf") 2>/dev/null || ++ dirpart=`$as_dirname -- "$mf" || + $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ +- X"$mf" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || + echo X"$mf" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + else + continue + fi +@@ -21704,53 +22958,79 @@ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue +- fdir=`(dirname "$file") 2>/dev/null || ++ fdir=`$as_dirname -- "$file" || + $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ +- X"$file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || + echo X"$file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p $dirpart/$fdir +- else +- as_dir=$dirpart/$fdir ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir=$dirpart/$fdir ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || + echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 +-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done + ;; ++ + esac +-done +-_ACEOF ++done # for ac_tag + +-cat >>$CONFIG_STATUS <<\_ACEOF + + { (exit 0); exit 0; } + _ACEOF +Index: sword-1.5.9/configure.ac +=================================================================== +--- sword-1.5.9.orig/configure.ac 2006-09-02 21:28:06.000000000 +0100 ++++ sword-1.5.9/configure.ac 2006-11-23 11:32:55.000000000 +0000 +@@ -30,6 +30,8 @@ + + AC_C_BIGENDIAN + ++ACX_CLUCENE ++ + # --------------------------------------------------------------------- + # With options + # --------------------------------------------------------------------- +@@ -47,8 +49,8 @@ + # (default=internal)]),,with_installmgr=internal) + AC_ARG_WITH(curl, + AC_HELP_STRING([--with-curl],[build install manager support using libcurl (default=yes)]),,with_curl=yes) +-AC_ARG_WITH(lucene, +- AC_HELP_STRING([--with-lucene],[include lucene support for searching (default=no)]),,with_lucene=no) ++#AC_ARG_WITH(lucene, ++# AC_HELP_STRING([--with-lucene],[include lucene support for searching (default=no)]),,with_lucene=no) + + + # --------------------------------------------------------------------- +@@ -203,13 +205,13 @@ + # --------------------------------------------------------------------- + + #FIXME: always make lucene available without checking for lib and headers +-if test x$with_lucene = xyes; then ++if test x$with_clucene = xyes; then + echo "lucene found - lucene searching options available" +- LUCENE_AM_CFLAGS="" +- LUCENE_LIBS="-lclucene" +- AM_CXXFLAGS="$AM_CXXFLAGS -DUSELUCENE" ++# LUCENE_AM_CFLAGS="" ++# LUCENE_LIBS="-lclucene" ++ AM_CXXFLAGS="$AM_CXXFLAGS $CLUCENE_CXXFLAGS -DUSELUCENE" + AM_CFLAGS="$AM_CFLAGS -DUSELUCENE" +- LIBS="$LIBS $LUCENE_LIBS" ++ LIBS="$LIBS $CLUCENE_LIBS" + fi + + +@@ -234,7 +236,7 @@ + AC_SUBST(CC) + AC_SUBST(CURL_AM_CFLAGS) + AC_SUBST(CURL_LIBS) +-AC_SUBST(LUCENE_LIBS) ++#AC_SUBST(LUCENE_LIBS) + AC_SUBST(ICU_LIBS) + AC_SUBST(ICU_IOLIBS) + AC_SUBST(ICU_VER) +@@ -257,7 +259,7 @@ + # --------------------------------------------------------------------- + AM_CONDITIONAL(MINGW, test x$target_mingw32 = xyes) + AM_CONDITIONAL(ICU, test x$with_icu = xyes) +-AM_CONDITIONAL(USELUCENE, test x$with_lucene = xyes) ++AM_CONDITIONAL(USELUCENE, test x$with_clucene = xyes) + AM_CONDITIONAL(ICUSWORD, test x$with_icu = xsword) + AM_CONDITIONAL(ZLIB, test x$with_zlib = xyes) + AM_CONDITIONAL(INSTCONF, test x$with_conf = xyes) +Index: sword-1.5.9/m4/acx_clucene.m4 +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ sword-1.5.9/m4/acx_clucene.m4 2006-11-23 11:32:55.000000000 +0000 +@@ -0,0 +1,70 @@ ++dnl CLucene detection m4 ++AC_DEFUN([ACX_CLUCENE], [ ++AC_LANG_SAVE ++AC_LANG(C++) ++ ++ ++# Ask user for path to clucene-core stuff:. ++AC_ARG_WITH(clucene, ++ AC_HELP_STRING([ --with-clucene=], ++ [prefix of CLucene-Core installation. e.g. /usr/local or /usr]),,) ++ ++#try some default locations ++if test -z "$with_clucene"; then ++ #use parent of this directory, and some common library paths ++ with_clucene=$(cd "../" && pwd) ++ with_clucene="$with_clucene /usr /usr/local" ++else ++ #use an absolute path ++ with_clucene=$(cd "$with_clucene" && pwd) ++fi ++clucene_set_failed= ++ ++AC_MSG_CHECKING([how to include clucene]) ++CLUCENE_CXXFLAGS= ++CLUCENE_LIBS= ++for flag in $with_clucene; do ++ if test -z "$clucene_set_failed"; then ++ if test -e "$flag/include/CLucene/StdHeader.h"; then ++ if test -e "$flag/lib/CLucene/clucene-config.h"; then ++ if test -e "$flag/lib/libclucene.la"; then ++ CLUCENE_LIBS="-L$flag/lib -lclucene" ++ CLUCENE_CXXFLAGS="-I$flag/include -I$flag/lib" ++ clucene_set_failed=$flag ++ fi ++ fi ++ fi ++ fi ++ ++ if test -z "$clucene_set_failed"; then ++ if test -e "$flag/src/CLucene/StdHeader.h"; then ++ if test -e "$flag/src/libclucene.la"; then ++ CLUCENE_LIBS="-L$flag/src/ -lclucene" ++ CLUCENE_CXXFLAGS="-I$flag/src/" ++ clucene_set_failed=$flag/src/ ++ fi ++ fi ++ fi ++done ++ ++if test -z "$clucene_set_failed"; then ++ clucene_set_failed="true" ++ AC_MSG_RESULT("failed") ++else ++ AC_MSG_RESULT($clucene_set_failed) ++fi ++ ++if test "$clucene_set_failed" = "true"; then ++ AC_MSG_ERROR([You must call configure with the --with-clucene option ++ or you must compile this package from a subdirectory of the clucene core. ++ This tells configure where to find the CLucene Core library and headers. ++ e.g. --with-clucene=/usr/local or --with-clucene=/usr]) ++fi ++AC_SUBST(CLUCENE_LIBS) ++AC_SUBST(CLUCENE_CXXFLAGS) ++ ++ ++ ++AC_LANG_RESTORE ++])dnl ACX_CLUCENE ++ +Index: sword-1.5.9/sword.pc.in +=================================================================== +--- sword-1.5.9.orig/sword.pc.in 2006-11-23 11:34:29.000000000 +0000 ++++ sword-1.5.9/sword.pc.in 2006-11-23 11:34:37.000000000 +0000 +@@ -7,6 +7,6 @@ + Name: SWORD + Description: Biblical Text Engine + Version: @VERSION@ +-Libs: -L${libdir} -lsword -lz @CURL_LIBS@ @LUCENE_LIBS@ @ICU_LIBS@ @ICU_IOLIBS@ ++Libs: -L${libdir} -lsword -lz @CURL_LIBS@ @CLUCENE_LIBS@ @ICU_LIBS@ @ICU_IOLIBS@ + Cflags: -I${includedir}/sword +