Ubuntu
lm-sensors package

sensors-detect doesn't detect sensors on Qosmio F10 notebook

Bug #29015 reported by peter branch
6
Affects Status Importance Assigned to Milestone
Ubuntu
Invalid
Medium
Unassigned
lm-sensors (Ubuntu)
Invalid
Medium
Unassigned

Bug Description

Hi I have a few problems i'm hoping you can help me with. I have a Toshiba Qosmio F10 notebook on which i was running FC4 but I have now installed Ubuntu Breezy.
A few things do not work under breezy sensors being one of them. In FC4 lm-sensors work ok, but in breezy running sensors-detect comes back with no sensors found. The system detect's the temperature on boot but it does not update.
In FC4 i2c_i801 & i2c_core modules are loaded and if i run sensors-detect in FC4.
Also when i shutdown my notebook, it can take up to 5 minuets to shutdown or restart. Also the nvidia 8178 drivers install but hard-lock the display with a black screen afte reboot. I think this one is a driver problem as it's also black screen in fc4 & dapper. FC$ does not hard lock however & if i press the power button the system shuts down.
Below I've added my lspci, lspci -n, dmesg, from ubuntu and the info from what is found when iI run sensors-detect in fc4.

I've also posted these :
https://launchpad.net/distros/ubuntu/+source/linux-restricted-modules-2.6.15/+bug/6616/
http://www.nvnews.net/vbulletin/showthread.php?t=63158
my lspci is:-
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 21)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 21)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0348 (rev a1)
0000:02:05.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
0000:02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (MOB) Ethernet Controller (rev 83)
0000:02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
0000:02:0b.0 CardBus bridge: Texas Instruments: Unknown device 8031
0000:02:0b.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032
0000:02:0b.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033
0000:02:0b.4 0805: Texas Instruments: Unknown device 8034

And lspci -n :-
0000:00:00.0 0600: 8086:3340 (rev 21)
0000:00:01.0 0604: 8086:3341 (rev 21)
0000:00:1d.0 0c03: 8086:24c2 (rev 03)
0000:00:1d.1 0c03: 8086:24c4 (rev 03)
0000:00:1d.2 0c03: 8086:24c7 (rev 03)
0000:00:1d.7 0c03: 8086:24cd (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev 83)
0000:00:1f.0 0601: 8086:24cc (rev 03)
0000:00:1f.1 0101: 8086:24ca (rev 03)
0000:00:1f.5 0401: 8086:24c5 (rev 03)
0000:00:1f.6 0703: 8086:24c6 (rev 03)
0000:01:00.0 0300: 10de:0348 (rev a1)
0000:02:05.0 0280: 8086:4220 (rev 05)
0000:02:08.0 0200: 8086:103d (rev 83)
0000:02:09.0 0400: 4444:0016 (rev 01)
0000:02:0b.0 0607: 104c:8031
0000:02:0b.2 0c00: 104c:8032
0000:02:0b.3 0180: 104c:8033
0000:02:0b.4 0805: 104c:8034

dmesg is :-
 partition has wrong signature?
[4294680.070000] usbcore: registered new driver usbfs
[4294680.070000] usbcore: registered new driver hub
[4294680.072000] USB Universal Host Controller Interface driver v2.2
[4294680.072000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294680.073000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294680.073000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294680.073000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
[4294680.135000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294680.135000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000cfe0
[4294680.135000] hub 1-0:1.0: USB hub found
[4294680.135000] hub 1-0:1.0: 2 ports detected
[4294680.138000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294680.138000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294680.138000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294680.138000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
[4294680.200000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294680.200000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000cf80
[4294680.200000] hub 2-0:1.0: USB hub found
[4294680.200000] hub 2-0:1.0: 2 ports detected
[4294680.203000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294680.203000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294680.203000] uhci_hcd 0000:00:1d.2: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
[4294680.265000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294680.265000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000cf60
[4294680.265000] hub 3-0:1.0: USB hub found
[4294680.265000] hub 3-0:1.0: 2 ports detected
[4294680.312000] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
[4294680.313000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[4294680.313000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[4294680.313000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294680.313000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
[4294680.313000] ehci_hcd 0000:00:1d.7: debug port 1
[4294680.313000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[4294680.313000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0x40000000
[4294680.317000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294680.317000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294680.317000] hub 4-0:1.0: USB hub found
[4294680.317000] hub 4-0:1.0: 6 ports detected
[4294680.451000] e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
[4294680.451000] e100: Copyright(c) 1999-2005 Intel Corporation
[4294680.452000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[4294680.452000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[4294680.498000] e100: eth0: e100_probe: addr 0xceefe000, irq 11, MAC addr 00:0E:7B:E1:DE:24
[4294683.322000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294683.323000] ACPI: Thermal Zone [THRM] (43 C)
[4294683.872000] Attempting manual resume
[4294683.885000] swsusp: Suspend partition has wrong signature?
[4294683.930000] kjournald starting. Commit interval 5 seconds
[4294683.930000] EXT3-fs: mounted filesystem with ordered data mode.
[4294688.758000] Adding 2104472k swap on /dev/hda5. Priority:-1 extents:1
[4294689.207000] EXT3 FS on hda2, internal journal
[4294693.066000] lp: driver loaded but no devices found
[4294693.106000] mice: PS/2 mouse device common for all mice
[4294693.292000] ieee1394: Initialized config rom entry `ip1394'
[4294693.327000] SCSI subsystem initialized
[4294693.379000] sbp2: $Rev: 1219 $ Ben Collins <email address hidden>
[4294693.477000] Linux agpgart interface v0.101 (c) Dave Jones
[4294693.513000] alps.c: Enabling hardware tapping
[4294693.605000] input: PS/2 Mouse on isa0060/serio1
[4294693.607000] input: AlpsPS/2 ALPS GlidePoint on isa0060/serio1
[4294693.883000] nvidia: module license 'NVIDIA' taints kernel.
[4294693.930000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[4294693.930000] PCI: setting IRQ 10 as level-triggered
[4294693.930000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
[4294693.931000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 12:58:54 PDT 2005
[4294694.633000] ts: Compaq touchscreen protocol output
[4294698.439000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
[4294701.108000] kjournald starting. Commit interval 5 seconds
[4294701.108000] EXT3 FS on hda6, internal journal
[4294701.108000] EXT3-fs: mounted filesystem with ordered data mode.
[4294701.170000] NTFS driver 2.1.22 [Flags: R/O MODULE].
[4294701.225000] NTFS volume version 3.1.
[4294701.254000] NTFS volume version 3.1.
[4294704.401000] agpgart: Detected an Intel 855PM Chipset.
[4294704.450000] agpgart: AGP aperture is 256M @ 0xb0000000
[4294704.882000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294704.921000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294704.921000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294705.359000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294705.359000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294705.483000] hw_random: RNG not detected
[4294707.771000] PCI: Enabling device 0000:00:1f.5 (0000 -> 0003)
[4294707.771000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[4294707.771000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294708.585000] intel8x0_measure_ac97_clock: measured 49149 usecs
[4294708.585000] intel8x0: clocking to 48000
[4294709.341000] slamr: SmartLink AMRMO modem.
[4294709.347000] slamr: probe 8086:24c6 ICH4 card...
[4294709.347000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[4294709.347000] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[4294709.350000] slamr: mc97 codec is SIL27
[4294709.350000] slamr: slamr0 is ICH4 card.
[4294709.571000] ieee80211_crypt: registered algorithm 'NULL'
[4294709.585000] ieee80211: 802.11 data/management/control stack, 1.0.3
[4294709.585000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[4294709.642000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
[4294709.642000] ipw2200: Copyright(c) 2003-2004 Intel Corporation
[4294709.647000] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294709.647000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4294710.394000] Linux Kernel Card Services
[4294710.394000] options: [pci] [cardbus] [pm]
[4294710.401000] PCI: Enabling device 0000:02:0b.0 (0000 -> 0002)
[4294710.401000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294710.401000] Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001]
[4294710.401000] Yenta: Enabling burst memory read transactions
[4294710.401000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294710.401000] Yenta: Routing CardBus interrupts to PCI
[4294710.401000] Yenta TI: socket 0000:02:0b.0, mfunc 0x01aa1b02, devctl 0x64
[4294710.622000] Yenta: ISA IRQ mask 0x00f8, PCI irq 11
[4294710.622000] Socket status: 30000006
[4294710.811000] ohci1394: $Rev: 1250 $ Ben Collins <email address hidden>
[4294710.811000] PCI: Enabling device 0000:02:0b.2 (0000 -> 0002)
[4294710.811000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[4294710.811000] ACPI: PCI Interrupt 0000:02:0b.2[C] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[4294710.864000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[40002000-400027ff] Max Packet=[2048]
[4294712.123000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000039000066ab5d]
[4294712.395000] input: PC Speaker
[4294712.699000] Real Time Clock Driver v1.12
[4294713.916000] e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
[4294713.954000] NET: Registered protocol family 17
[4294719.666000] NET: Registered protocol family 10
[4294719.666000] Disabled Privacy Extensions on device c031eb40(lo)
[4294719.667000] IPv6 over IPv4 tunneling driver
[4294721.989000] ACPI: AC Adapter [ADP1] (on-line)
[4294722.066000] ACPI: Battery Slot [BAT1] (battery present)
[4294722.103000] ACPI: Power Button (FF) [PWRF]
[4294722.103000] ACPI: Power Button (CM) [PWRB]
[4294722.103000] ACPI: Lid Switch [LID]
[4294722.276000] ibm_acpi: ec object not found
[4294722.437000] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19a-dev
[4294722.437000] toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
[4294722.449000] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
[4294722.449000] toshiba_acpi: ktoshkeyd will check 2 times per second
[4294722.450000] toshiba_acpi: Dropped 0 keys from the queue on startup
[4294722.504000] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[4294730.602000] eth1: no IPv6 routers present
[4294735.473000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294735.473000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4294735.473000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[4294736.760000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294736.760000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4294736.760000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[4294747.074000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[4294747.074000] apm: overridden by ACPI.
[4294747.479000] ip_tables: (C) 2000-2002 Netfilter core team
[4294747.687000] ip_conntrack version 2.1 (8190 buckets, 65520 max) - 248 bytes per conntrack
[4294750.506000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294750.506000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294750.506000] ide: failed opcode was: 0xef
[4294750.512000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294750.512000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294750.512000] ide: failed opcode was: 0xe3
[4294751.273000] cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
[4294751.276000] cs: IO port probe 0xc00-0xcf7: clean.
[4294751.277000] cs: IO port probe 0xa00-0xaff: clean.
[4294755.644000] eth1: no IPv6 routers present
[4294777.164000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294779.509000] ISO 9660 Extensions: RRIP_1991A
[4295466.975000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=229 TOS=0x00 PREC=0x00 TTL=128 ID=46404 PROTO=UDP SPT=138 DPT=138 LEN=209
[4296187.236000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=229 TOS=0x00 PREC=0x00 TTL=128 ID=46409 PROTO=UDP SPT=138 DPT=138 LEN=209
[4296319.297000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=46422 PROTO=UDP SPT=137 DPT=137 LEN=58
[4296319.309000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=46427 PROTO=UDP SPT=137 DPT=137 LEN=58
[4296908.061000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=229 TOS=0x00 PREC=0x00 TTL=128 ID=48008 PROTO=UDP SPT=138 DPT=138 LEN=209
[4297630.681000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=229 TOS=0x00 PREC=0x00 TTL=128 ID=48013 PROTO=UDP SPT=138 DPT=138 LEN=209
[4297664.345000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48134 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297664.359000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48136 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297665.094000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48172 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297665.109000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48175 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297665.844000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48210 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297665.859000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48211 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297685.942000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48294 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297685.943000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48298 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297686.692000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48301 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297686.692000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48302 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297687.442000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48305 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297687.442000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48306 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297688.251000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48310 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297689.001000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48313 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297689.751000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48315 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297690.560000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48318 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297691.310000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48321 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297692.060000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48323 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297692.883000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48326 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297693.632000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48329 PROTO=UDP SPT=137 DPT=137 LEN=58
[4297694.382000] Inbound IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:13:d4:3b:65:4a:08:00 SRC=10.0.0.12 DST=10.0.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=48331 PROTO=UDP SPT=137 DPT=137 LEN=58

this is detected in fc4 :-
"Driver `lm90' (should be inserted):
  Detects correctly:
  * Bus `SMBus I801 adapter at d880'
    Busdriver `i2c-i801', I2C address 0x4c
    Chip `Analog Devices ADM1032' (confidence: 8)

Driver `eeprom' (should be inserted):
  Detects correctly:
  * Bus `SMBus I801 adapter at d880'
    Busdriver `i2c-i801', I2C address 0x50
    Chip `SPD EEPROM' (confidence: 8)
  * Bus `SMBus I801 adapter at d880'
    Busdriver `i2c-i801', I2C address 0x51
    Chip `SPD EEPROM' (confidence: 8)"

Thanks for any help in advance.
peter.

Revision history for this message
Matt Zimmerman (mdz) wrote :

Removing Ubuntu task; this is already associated with a specific package

Revision history for this message
Matt Zimmerman (mdz) wrote :

Please file only one bug report at a time; consider that the problems will be resolved separately, and quite likely by different people, so they need to be tracked separately. Since you provided the most information about the sensor problem, let's use this bug to track only that issue.

Revision history for this message
CTW (ctw) wrote :

I have a related (?) problem on an HP Pavilion DV1000 notebook after upgrading from Breezy to Dapper. During boot-up I get a "setting sensors limits failed" notice. I tried sensors-detect and it detects the sensors only if the required modules are removed first (they were automatically loaded, as I had already gone through the process in the breezy installation), but the failure notice remains during boot-ups.

Revision history for this message
Sitsofe Wheeler (sitsofe) wrote :

peter:

Is the lm-sensors issue any better on recent dapper install?

Changed in lm-sensors:
status: Unconfirmed → Needs Info
Revision history for this message
CTW (ctw) wrote : Re: [Bug 29015] Re: sensors-detect doesn't detect sensors on Qosmio F10

On Wednesday 17 May 2006 10:42, Sitsofe Wheeler - <email address hidden> wrote:
> peter:
>
> Is the lm-sensors issue any better on recent dapper install?

Yesterday I still got the "failed" message during bootup (I do daily updates).
I will check again tonight (don't have my laptop here with me right now).

Christoph

Revision history for this message
CTW (ctw) wrote :

Yesterday I still got the "failed" message during bootup (I do daily updates).
I will check again tonight (don't have my laptop here with me right now).

Revision history for this message
peter branch (ptrbee) wrote :

Christoph, I have moved to arch linux now, so I don't know sorry

Revision history for this message
Scott James Remnant (Canonical) (canonical-scott) wrote :

Reporter no longer using Ubuntu

Changed in lm-sensors:
status: Needs Info → Rejected
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.