--- ecosconfig-imx-200910.orig/debian/ecosconfig-imx.sgml
+++ ecosconfig-imx-200910/debian/ecosconfig-imx.sgml
@@ -0,0 +1,385 @@
+ manpage.1'. You may view
+ the manual page with: `docbook-to-man manpage.sgml | nroff -man |
+ less'. A typical entry in a Makefile or Makefile.am is:
+
+manpage.1: manpage.sgml
+ docbook-to-man $< > $@
+
+
+ The docbook-to-man binary is found in the docbook-to-man package.
+ Please remember that if you create the nroff version in one of the
+ debian/rules file targets (such as build), you will need to include
+ docbook-to-man in your Build-Depends control field.
+
+ -->
+
+
+ Masato">
+ Taruishi">
+
+ May 18 2002">
+
+ 1">
+ <taru@debian.org>">
+
+ ECOS">
+
+
+ Debian">
+ GNU">
+]>
+
+
+
+
+ &dhemail;
+
+
+ &dhfirstname;
+ &dhsurname;
+
+
+ 2001
+ &dhusername;
+
+ &dhdate;
+
+
+ &dhucpackage;
+
+ &dhsection;
+
+
+ &dhpackage;
+
+ eCos configuration program
+
+
+
+ &dhpackage;
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ command
+
+
+
+
+ DESCRIPTION
+
+ This manual page documents briefly the
+ &dhpackage; command.
+
+ This manual page was written for the &debian; distribution
+ because the original program does not have a manual page.
+ Instead, it has documentation in the PDF format; see below.
+
+ &dhpackage; is a program to configure your
+ eCos kernel linked with your embedded application and creating the
+ build tree.
+
+
+
+ OPTIONS
+
+ This program follows the usual GNU command line syntax,
+ with long options starting with two dashes (`-'). A summary of
+ options is included below. For a complete description, see the
+ PDF files.
+
+
+
+
+
+
+
+
+ Provides basic usage guidelines for the available commands and qualifiers. All
+ other qualifiers and commands are ignored if --help is used.
+
+
+
+
+
+
+
+
+ Specifies an eCos configuration save file for use by the tool. By default, the file
+ ecos.ecc in the current directory is used. Developers may prefer to use a common
+ location for all their eCos configurations rather than keep the configuration
+ information in the base of the build tree.
+
+
+
+
+
+
+
+
+ Specifies an alternative location for the install tree.
+ By default, the install tree
+ resides inside the install directory in the build tree.
+ Developers may prefer to
+ locate the build tree in a temporary file hierarchy
+ but keep the install tree in a more permanent location.
+
+
+
+
+
+
+
+
+ Specifies the location of the component repository.
+ By default, the tool uses the
+ location specified in the ECOS_REPOSITORY environment
+ variable. Developers
+ may prefer to use of this qualifier if they are working
+ with more than one repository.
+
+
+
+
+
+
+
+
+ Disables the implicit resolution of conflicts while manipulating the configuration
+ data. developers may prefer to reslove conflicts by editing the eCos configuration
+ save file manually The check command implicitely uses --no-resolve.
+
+
+
+
+
+
+
+ By default, ecosconfig will exit with an error code if the current configuration
+ contains any conflicts, and it is not possible to generate or update a build tree for
+ such configurations. This qualifier causes ecosconfig to ignore such problems,
+ and hence it is possible to generate a build tree even if there are still conflicts. Of
+ course, there are no guarantees that the resulting system will actually do anything
+ useful.
+
+
+
+
+
+
+
+
+ Display more information.
+
+
+
+
+
+ Display less information.
+
+
+
+
+
+
+ COMMANDS
+ The available commands for ecosconfig are as follows:
+
+
+ list
+
+
+ Lists the available packages, targets and templates as installed in the eCos
+ repository. Aliases and package versions are also reported.
+
+
+
+
+
+ new target template version
+
+
+ Creates a new eCos configuration for the specified target hardware and saves it. A
+ software template may also be specified. By default, the template named `default'
+ is used. If the template version is not specified, the latest version is used.
+
+
+
+
+
+ target target
+
+ Changes the target hardware selection for the eCos configuration. This has the
+ effect of unloading packages supporting the target selected previously and loading
+ the packages which support the new hardware. This command will be used
+ typically when switching between a simulator and real hardware.
+
+
+
+
+ template template version
+
+ Changes the template selection for the eCos configuration. This has the effect of
+ unloading packages specified by the template selected previously and loading the
+ packages specified by the new template. By default, the latest version of the
+ specified template is used.
+
+
+
+
+
+ remove packages
+
+ Removes the specified packages from the eCos configuration. This command will
+ be used typically when the template on which a configuration is based contains
+ packages which are not required.
+
+
+
+
+
+ add packages
+
+ Adds the specified packages to the eCos configuration. This command will be
+ used typically when the template on which a configuration is based does not
+ contain all the packages which are required. For example, add-on packages
+ provided by third parties will not be known to the standard templates so they will
+ have to be added explicitely.
+
+
+
+
+
+ version version packages
+
+ Selects the specified version of a number of packages in the eCos configuration.
+ By default, the most recent version of each package is used. This command will
+ be used typically when an older version of a package is required.
+
+
+
+
+
+ check
+
+
+
+ Presents the following information concerning the current configuration:
+
+
+
+ the selected target hardware
+
+
+
+
+ the selected template
+
+
+
+ additional packages
+
+
+
+ removed packages
+
+
+
+ the selected version of packages where this is not the most recent version
+
+
+ conflicts in the current configuration
+
+
+
+
+ The check command will never perform automatic conflict resolution, so there is
+ no need to use --no-resolve.
+
+
+
+
+ resolve
+
+ Resolves conflicts identified in the current eCos configuration by invoking an
+ inference capability. Resolved conflicts are reported, but not all conflicts may be
+ resolvable. This command will be used typically following manual editing of the
+ configuration.
+
+
+
+
+ export file
+
+ Exports a minimal eCos configurastion save file with the specified name. This file
+ contains only those options which do not have their default value. Such files are
+ used typically to transfer option values from one configuration to another.
+
+
+
+
+ import file
+
+
+
+ Imports a minimal eCos configuration save file with the specified name. The
+ values of those options specified in the file are applied to the current
+ configuration.
+
+
+
+
+
+
+
+
+ SEE ALSO
+
+ The programs are documented fully by eCos User's Guide
+ available.
+
+
+
+ AUTHOR
+
+ This manual page was written by &dhusername; &dhemail; for
+ the &debian; system (but may be used by others). This is mostly
+ copied from the eCos's user guide available in html or PDF format.
+
+
+
+
+
+
+
--- ecosconfig-imx-200910.orig/debian/compat
+++ ecosconfig-imx-200910/debian/compat
@@ -0,0 +1 @@
+7
--- ecosconfig-imx-200910.orig/debian/watch
+++ ecosconfig-imx-200910/debian/watch
@@ -0,0 +1,2 @@
+# Empty watch file to silence lintian
+# new upstream sources are provided directly from Freescale
--- ecosconfig-imx-200910.orig/debian/copyright
+++ ecosconfig-imx-200910/debian/copyright
@@ -0,0 +1,46 @@
+This package was debianized by:
+
+ Michael Casadevall on Fri, 13 Mar 2009 04:51:13 -0400
+
+The source code for this package was provided by Freescale Semiconductors, Inc.
+
+Upstream Authors:
+
+ Red Hat, Inc
+ eCosCentric Limited
+
+Copyright:
+
+ Copyright (C) 2000-2003, 2004 Red Hat, Inc.
+ Copyright (C) 2003-2006 eCosCentric Limited
+ Copyright (C) 2002 Bart Veer
+ Copyright (C) 2003 John Dallaway
+ Copyright (C) Markus Holzem
+
+License:
+
+ This package is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This package is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this package; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.
+
+The Debian packaging is:
+
+ Copyright (C) 2009, Michael Casadevall Canonical Ltd.
+
+and is licensed under the GPL, see above.
+
+The ecosconfig-imx manpage was written by Masato Taruishi
+for an older ecosconfig package for Debian, and has been adapted for this package.
--- ecosconfig-imx-200910.orig/debian/ecosconfig-imx.manpages
+++ ecosconfig-imx-200910/debian/ecosconfig-imx.manpages
@@ -0,0 +1 @@
+ecosconfig-imx.1
--- ecosconfig-imx-200910.orig/debian/rules
+++ ecosconfig-imx-200910/debian/rules
@@ -0,0 +1,107 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# Add dpatch support
+include /usr/share/dpatch/dpatch.make
+
+BUILD_DIR=build
+
+configure: configure-stamp
+configure-stamp:
+ dh_testdir
+
+ # ecosconfig requires an out-of-source build directory
+ mkdir $(BUILD_DIR)
+ cd $(BUILD_DIR) && TCL_INC_DIR=/usr/include/tcl ../src/configure --prefix=/usr --program-suffix=-imx
+ touch configure-stamp
+
+
+build: build-stamp
+build-stamp: configure-stamp patch-stamp
+ dh_testdir
+
+ # Add here commands to compile the package.
+ cd $(BUILD_DIR) && $(MAKE)
+
+ touch $@
+
+clean: unpatch
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp configure-stamp
+ rm -f ecosconfig-imx.1
+
+ # Add here commands to clean up after the build process.
+ rm -fr build
+
+ dh_clean
+
+get-orig-source: clean
+ # Remove the old libtool script; we autoreconf (and thus relibtoolize)
+ # the package via a patch
+ -rm acsupport/ltconfig
+
+ # We need to include GPL COPYING because the tarball we got
+ # from FSL doesn't have it; the COPYING file is in the overall
+ # zip file received.
+
+ cp /usr/share/common-licenses/GPL-2 COPYING
+
+ # Now tar it all up
+ cd .. && sh -c "/bin/tar czf ecosconfig-imx_200910.orig.tar.gz --exclude=debian --exclude=.bzr --exclude=.bzr-builddeb --exclude=bin `basename $(CURDIR)`"
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_prep
+ dh_installdirs
+
+ # Add here commands to install the package into debian/ecosconfig.
+ cd $(BUILD_DIR) && $(MAKE) DESTDIR=$(CURDIR)/debian/ecosconfig-imx install
+ /usr/bin/docbook-to-man debian/ecosconfig-imx.sgml > ecosconfig-imx.1
+
+# Build architecture-independent files here.
+binary-indep: install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: install
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installexamples
+# dh_install
+# dh_installmenu
+# dh_installdebconf
+# dh_installlogrotate
+# dh_installemacsen
+# dh_installpam
+# dh_installmime
+# dh_python
+# dh_installinit
+# dh_installcron
+# dh_installinfo
+ dh_installman
+ dh_link
+ dh_strip
+ dh_compress
+ dh_fixperms
+# dh_perl
+# dh_makeshlibs
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
--- ecosconfig-imx-200910.orig/debian/control
+++ ecosconfig-imx-200910/debian/control
@@ -0,0 +1,22 @@
+Source: ecosconfig-imx
+Section: misc
+Priority: extra
+Maintainer: Ubuntu Mobile Team
+XSBC-Original-Maintainer: Michael Casadevall
+Build-Depends: debhelper (>= 7), dpatch, docbook-to-man, tcl-dev, tk-dev
+Vcs-Bzr: lp:~ubuntu-mobile/ecosconfig-imx/ubuntu
+Vcs-Browser: http://bazaar.launchpad.net/~ubuntu-mobile/ecosconfig-imx/ubuntu
+Standards-Version: 3.8.0
+Homepage: http://ecos.sourceware.org/
+
+Package: ecosconfig-imx
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: eCos configuration tool for imx SoC's RedBoot
+ ecosconfig is part of the eCos and RedBoot build systems. This
+ package is used to build the redboot-imx package and is
+ out of date with the mainstream eCos repository. Unless you intend
+ to build redboot-imx, you do not need this package, and if you
+ intend to do eCos development, youshould grab a newer version of eCos and
+ ecosconfig from eCos homepage.
+
--- ecosconfig-imx-200910.orig/debian/changelog
+++ ecosconfig-imx-200910/debian/changelog
@@ -0,0 +1,12 @@
+ecosconfig-imx (200910-0ubuntu2) lucid; urgency=low
+
+ * rebuild rest of main for armel armv7/thumb2 optimization;
+ UbuntuSpec:mobile-lucid-arm-gcc-v7-thumb2
+
+ -- Alexander Sack Fri, 05 Mar 2010 04:14:12 +0100
+
+ecosconfig-imx (200910-0ubuntu1) jaunty; urgency=low
+
+ * Initial Release. (LP: #343693)
+
+ -- Michael Casadevall Fri, 13 Mar 2009 04:51:13 -0400
--- ecosconfig-imx-200910.orig/debian/README.Ubuntu
+++ ecosconfig-imx-200910/debian/README.Ubuntu
@@ -0,0 +1,9 @@
+Notes for ecosconfig-imx:
+This package is repackaged from the sourceballs received
+from freescale to strip out binaries and tar files of
+unknown orgins shipped in it, as well as to remove old
+libtool scripts (the package is autoreconf'ed via a patch).
+
+This package exists to build redboot-imx, and is not intended
+for general use, or as a development tool for the eCos development
+environment
--- ecosconfig-imx-200910.orig/debian/patches/99_autoreconf.dpatch
+++ ecosconfig-imx-200910/debian/patches/99_autoreconf.dpatch
@@ -0,0 +1,10373 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 99_autoreconf.dpatch by Michael Casadevall
+##
+## DP: autoreconf's the package to include a new libtool
+
+@DPATCH@
+diff -urNad ecosconfig-imx~/acsupport/config.guess ecosconfig-imx/acsupport/config.guess
+--- ecosconfig-imx~/acsupport/config.guess 2009-03-16 13:17:55.000000000 -0400
++++ ecosconfig-imx/acsupport/config.guess 2009-03-16 13:31:51.102307469 -0400
+@@ -1,8 +1,11 @@
+ #! /bin/sh
+ # Attempt to guess a canonical system name.
+-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+ # Free Software Foundation, Inc.
+-#
++
++timestamp='2008-01-23'
++
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+ # the Free Software Foundation; either version 2 of the License, or
+@@ -15,199 +18,294 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
+ #
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
+-# Written by Per Bothner .
+-# Please send patches to .
++
++# Originally written by Per Bothner .
++# Please send patches to . Submit a context
++# diff and a properly formatted ChangeLog entry.
+ #
+ # This script attempts to guess a canonical system name similar to
+ # config.sub. If it succeeds, it prints the system name on stdout, and
+ # exits with 0. Otherwise, it exits with 1.
+ #
+ # The plan is that this can be called by configure scripts if you
+-# don't specify an explicit system type (host/target name).
+-#
+-# Only a few systems have been added to this list; please add others
+-# (but try to keep the structure clean).
+-#
++# don't specify an explicit build system type.
+
+-# Use $HOST_CC if defined. $CC may point to a cross-compiler
+-if test x"$CC_FOR_BUILD" = x; then
+- if test x"$HOST_CC" != x; then
+- CC_FOR_BUILD="$HOST_CC"
+- else
+- if test x"$CC" != x; then
+- CC_FOR_BUILD="$CC"
+- else
+- CC_FOR_BUILD=cc
+- fi
+- fi
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION]
++
++Output the configuration name of the system \`$me' is run on.
++
++Operation modes:
++ -h, --help print this help, then exit
++ -t, --time-stamp print date of last modification, then exit
++ -v, --version print version number, then exit
++
++Report bugs and patches to ."
++
++version="\
++GNU config.guess ($timestamp)
++
++Originally written by Per Bothner.
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
++2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++
++This is free software; see the source for copying conditions. There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++ case $1 in
++ --time-stamp | --time* | -t )
++ echo "$timestamp" ; exit ;;
++ --version | -v )
++ echo "$version" ; exit ;;
++ --help | --h* | -h )
++ echo "$usage"; exit ;;
++ -- ) # Stop option processing
++ shift; break ;;
++ - ) # Use stdin as input.
++ break ;;
++ -* )
++ echo "$me: invalid option $1$help" >&2
++ exit 1 ;;
++ * )
++ break ;;
++ esac
++done
++
++if test $# != 0; then
++ echo "$me: too many arguments$help" >&2
++ exit 1
+ fi
+
++trap 'exit 1' 1 2 15
++
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
++
++# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
++# use `HOST_CC' if defined, but it is deprecated.
++
++# Portable tmp directory creation inspired by the Autoconf team.
++
++set_cc_for_build='
++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
++: ${TMPDIR=/tmp} ;
++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
++dummy=$tmp/dummy ;
++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
++case $CC_FOR_BUILD,$HOST_CC,$CC in
++ ,,) echo "int x;" > $dummy.c ;
++ for c in cc gcc c89 c99 ; do
++ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
++ CC_FOR_BUILD="$c"; break ;
++ fi ;
++ done ;
++ if test x"$CC_FOR_BUILD" = x ; then
++ CC_FOR_BUILD=no_compiler_found ;
++ fi
++ ;;
++ ,,*) CC_FOR_BUILD=$CC ;;
++ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
++esac ; set_cc_for_build= ;'
+
+ # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+-# (ghazi@noc.rutgers.edu 8/24/94.)
++# (ghazi@noc.rutgers.edu 1994-08-24)
+ if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+ fi
+
+ UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
++UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+ UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+-dummy=dummy-$$
+-trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
+-
+ # Note: order is significant - the case branches are not exclusive.
+
+ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+- # Netbsd (nbsd) targets should (where applicable) match one or
++ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+- # Determine the machine/vendor (is the vendor relevant).
+- case "${UNAME_MACHINE}" in
+- amiga) machine=m68k-cbm ;;
+- arm32) machine=arm-unknown ;;
+- atari*) machine=m68k-atari ;;
+- sun3*) machine=m68k-sun ;;
+- mac68k) machine=m68k-apple ;;
+- macppc) machine=powerpc-apple ;;
+- hp3[0-9][05]) machine=m68k-hp ;;
+- ibmrt|romp-ibm) machine=romp-ibm ;;
+- *) machine=${UNAME_MACHINE}-unknown ;;
++ #
++ # Note: NetBSD doesn't particularly care about the vendor
++ # portion of the name. We always set it to "unknown".
++ sysctl="sysctl -n hw.machine_arch"
++ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
++ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
++ case "${UNAME_MACHINE_ARCH}" in
++ armeb) machine=armeb-unknown ;;
++ arm*) machine=arm-unknown ;;
++ sh3el) machine=shl-unknown ;;
++ sh3eb) machine=sh-unknown ;;
++ sh5el) machine=sh5le-unknown ;;
++ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
++ esac
++ # The Operating System including object format, if it has switched
++ # to ELF recently, or will in the future.
++ case "${UNAME_MACHINE_ARCH}" in
++ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
++ eval $set_cc_for_build
++ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep __ELF__ >/dev/null
++ then
++ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
++ # Return netbsd for either. FIX?
++ os=netbsd
++ else
++ os=netbsdelf
++ fi
++ ;;
++ *)
++ os=netbsd
++ ;;
+ esac
+- # The Operating System including object format.
+- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+- | grep __ELF__ >/dev/null
+- then
+- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+- # Return netbsd for either. FIX?
+- os=netbsd
+- else
+- os=netbsdelf
+- fi
+ # The OS release
+- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ # Debian GNU/NetBSD machines have a different userland, and
++ # thus, need a distinct triplet. However, they do not need
++ # kernel version information, so it can be replaced with a
++ # suitable tag, in the style of linux-gnu.
++ case "${UNAME_VERSION}" in
++ Debian*)
++ release='-gnu'
++ ;;
++ *)
++ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ ;;
++ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+- exit 0 ;;
++ exit ;;
++ *:OpenBSD:*:*)
++ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
++ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
++ exit ;;
++ *:ekkoBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
++ exit ;;
++ *:SolidBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
++ exit ;;
++ macppc:MirBSD:*:*)
++ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
++ exit ;;
++ *:MirBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
++ exit ;;
+ alpha:OSF1:*:*)
+- if test $UNAME_RELEASE = "V4.0"; then
++ case $UNAME_RELEASE in
++ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+- fi
++ ;;
++ *5.*)
++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
++ ;;
++ esac
++ # According to Compaq, /usr/sbin/psrinfo has been available on
++ # OSF/1 and Tru64 systems produced since 1995. I hope that
++ # covers most systems running today. This code pipes the CPU
++ # types through head -n 1, so we only detect the type of CPU 0.
++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++ case "$ALPHA_CPU_TYPE" in
++ "EV4 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "EV4.5 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "LCA4 (21066/21068)")
++ UNAME_MACHINE="alpha" ;;
++ "EV5 (21164)")
++ UNAME_MACHINE="alphaev5" ;;
++ "EV5.6 (21164A)")
++ UNAME_MACHINE="alphaev56" ;;
++ "EV5.6 (21164PC)")
++ UNAME_MACHINE="alphapca56" ;;
++ "EV5.7 (21164PC)")
++ UNAME_MACHINE="alphapca57" ;;
++ "EV6 (21264)")
++ UNAME_MACHINE="alphaev6" ;;
++ "EV6.7 (21264A)")
++ UNAME_MACHINE="alphaev67" ;;
++ "EV6.8CB (21264C)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8AL (21264B)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8CX (21264D)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.9A (21264/EV69A)")
++ UNAME_MACHINE="alphaev69" ;;
++ "EV7 (21364)")
++ UNAME_MACHINE="alphaev7" ;;
++ "EV7.9 (21364A)")
++ UNAME_MACHINE="alphaev79" ;;
++ esac
++ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+- cat <$dummy.s
+- .data
+-\$Lformat:
+- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+-
+- .text
+- .globl main
+- .align 4
+- .ent main
+-main:
+- .frame \$30,16,\$26,0
+- ldgp \$29,0(\$27)
+- .prologue 1
+- .long 0x47e03d80 # implver \$0
+- lda \$2,-1
+- .long 0x47e20c21 # amask \$2,\$1
+- lda \$16,\$Lformat
+- mov \$0,\$17
+- not \$1,\$18
+- jsr \$26,printf
+- ldgp \$29,0(\$26)
+- mov 0,\$16
+- jsr \$26,exit
+- .end main
+-EOF
+- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+- if test "$?" = 0 ; then
+- case `./$dummy` in
+- 0-0)
+- UNAME_MACHINE="alpha"
+- ;;
+- 1-0)
+- UNAME_MACHINE="alphaev5"
+- ;;
+- 1-1)
+- UNAME_MACHINE="alphaev56"
+- ;;
+- 1-101)
+- UNAME_MACHINE="alphapca56"
+- ;;
+- 2-303)
+- UNAME_MACHINE="alphaev6"
+- ;;
+- 2-307)
+- UNAME_MACHINE="alphaev67"
+- ;;
+- esac
+- fi
+- rm -f $dummy.s $dummy
+- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+- exit 0 ;;
++ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++ exit ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+- exit 0 ;;
++ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+- exit 0 ;;
++ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+- echo m68k-cbm-sysv4
+- exit 0;;
+- amiga:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
++ echo m68k-unknown-sysv4
++ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+- exit 0 ;;
+- arc64:OpenBSD:*:*)
+- echo mips64el-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- arc:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- hkmips:OpenBSD:*:*)
+- echo mips-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- pmax:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- sgi:OpenBSD:*:*)
+- echo mips-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- wgrisc:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
++ *:[Mm]orph[Oo][Ss]:*:*)
++ echo ${UNAME_MACHINE}-unknown-morphos
++ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+- exit 0 ;;
++ exit ;;
++ *:z/VM:*:*)
++ echo s390-ibm-zvmoe
++ exit ;;
++ *:OS400:*:*)
++ echo powerpc-ibm-os400
++ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+- exit 0;;
+- SR2?01:HI-UX/MPP:*:*)
++ exit ;;
++ arm:riscos:*:*|arm:RISCOS:*:*)
++ echo arm-unknown-riscos
++ exit ;;
++ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+- exit 0;;
++ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+@@ -215,25 +313,32 @@
+ else
+ echo pyramid-pyramid-bsd
+ fi
+- exit 0 ;;
++ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+- exit 0 ;;
++ exit ;;
++ DRS?6000:unix:4.0:6*)
++ echo sparc-icl-nx6
++ exit ;;
++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
++ case `/usr/bin/uname -p` in
++ sparc) echo sparc-icl-nx7; exit ;;
++ esac ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
+- i86pc:SunOS:5.*:*)
++ exit ;;
++ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+@@ -242,12 +347,12 @@
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+- exit 0 ;;
++ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ sun*:*:4.2BSD:*)
+- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
++ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+@@ -257,16 +362,13 @@
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+- exit 0 ;;
++ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+- exit 0 ;;
+- atari*:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+- # "atarist" or "atariste" at least should have a processor
++ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+@@ -274,50 +376,42 @@
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+- exit 0 ;;
+- sun3*:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mac68k:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mvme68k:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mvme88k:OpenBSD:*:*)
+- echo m88k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
++ m68k:machten:*:*)
++ echo m68k-apple-machten${UNAME_RELEASE}
++ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+- exit 0 ;;
++ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
++ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #ifdef __cplusplus
+ #include /* for printf() prototype */
+@@ -339,28 +433,37 @@
+ exit (-1);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy \
+- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+- && rm $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ $CC_FOR_BUILD -o $dummy $dummy.c &&
++ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
++ SYSTEM_NAME=`$dummy $dummyarg` &&
++ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
++ Motorola:PowerMAX_OS:*:*)
++ echo powerpc-motorola-powermax
++ exit ;;
++ Motorola:*:4.3:PL8-*)
++ echo powerpc-harris-powermax
++ exit ;;
++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++ echo powerpc-harris-powermax
++ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+- exit 0 ;;
++ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+- exit 0 ;;
++ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+- exit 0 ;;
++ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+- exit 0 ;;
++ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110]
++ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+@@ -372,31 +475,40 @@
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+- exit 0 ;;
++ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+- exit 0 ;;
++ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+- exit 0 ;;
++ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+- exit 0 ;;
++ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+- exit 0 ;;
++ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+- exit 0 ;;
++ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+- i?86:AIX:*:*)
++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
++ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
++ i*86:AIX:*:*)
+ echo i386-ibm-aix
+- exit 0 ;;
++ exit ;;
++ ia64:AIX:*:*)
++ if [ -x /usr/bin/oslevel ] ; then
++ IBM_REV=`/usr/bin/oslevel`
++ else
++ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++ fi
++ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
++ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
++ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include
+
+@@ -408,18 +520,21 @@
+ exit(0);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
+- echo rs6000-ibm-aix3.2.5
++ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
++ then
++ echo "$SYSTEM_NAME"
++ else
++ echo rs6000-ibm-aix3.2.5
++ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+- exit 0 ;;
+- *:AIX:*:4)
+- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+- if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
++ exit ;;
++ *:AIX:*:[456])
++ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
++ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+@@ -427,37 +542,56 @@
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+- IBM_REV=4.${UNAME_RELEASE}
++ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+- exit 0 ;;
++ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+- exit 0 ;;
++ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+- exit 0 ;;
++ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+- exit 0 ;; # report: romp-ibm BSD 4.3
++ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+- exit 0 ;;
++ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+- exit 0 ;;
++ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+- exit 0 ;;
++ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+- exit 0 ;;
++ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
++ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+- sed 's/^ //' << EOF >$dummy.c
++ if [ -x /usr/bin/getconf ]; then
++ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
++ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
++ case "${sc_cpu_version}" in
++ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
++ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
++ 532) # CPU_PA_RISC2_0
++ case "${sc_kernel_bits}" in
++ 32) HP_ARCH="hppa2.0n" ;;
++ 64) HP_ARCH="hppa2.0w" ;;
++ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
++ esac ;;
++ esac
++ fi
++ if [ "${HP_ARCH}" = "" ]; then
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++
++ #define _HPUX_SOURCE
+ #include
+ #include
+
+@@ -488,13 +622,39 @@
+ exit (0);
+ }
+ EOF
+- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+- rm -f $dummy.c $dummy
++ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
++ test -z "$HP_ARCH" && HP_ARCH=hppa
++ fi ;;
+ esac
+- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++ if [ ${HP_ARCH} = "hppa2.0w" ]
++ then
++ eval $set_cc_for_build
++
++ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
++ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
++ # generating 64-bit code. GNU and HP use different nomenclature:
++ #
++ # $ CC_FOR_BUILD=cc ./config.guess
++ # => hppa2.0w-hp-hpux11.23
++ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
++ # => hppa64-hp-hpux11.23
++
++ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
++ grep __LP64__ >/dev/null
++ then
++ HP_ARCH="hppa2.0w"
++ else
++ HP_ARCH="hppa64"
++ fi
++ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+- exit 0 ;;
++ exit ;;
++ ia64:HP-UX:*:*)
++ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++ echo ia64-hp-hpux${HPUX_REV}
++ exit ;;
+ 3050*:HI-UX:*:*)
++ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include
+ int
+@@ -520,449 +680,491 @@
+ exit (0);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
++ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+- exit 0 ;;
++ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+- exit 0 ;;
++ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+- exit 0 ;;
+- *9??*:MPE/iX:*:*)
++ exit ;;
++ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+- exit 0 ;;
++ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+- exit 0 ;;
++ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+- exit 0 ;;
+- i?86:OSF1:*:*)
++ exit ;;
++ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+- exit 0 ;;
++ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+- exit 0 ;;
+- hppa*:OpenBSD:*:*)
+- echo hppa-unknown-openbsd
+- exit 0 ;;
++ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+- exit 0 ;;
++ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+- exit 0 ;;
++ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+- exit 0 ;;
++ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+- exit 0 ;;
++ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+- exit 0 ;;
+- CRAY*X-MP:*:*:*)
+- echo xmp-cray-unicos
+- exit 0 ;;
++ exit ;;
+ CRAY*Y-MP:*:*:*)
+- echo ymp-cray-unicos${UNAME_RELEASE}
+- exit 0 ;;
++ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+- exit 0 ;;
++ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
++ -e 's/\.[^.]*$/.X/'
++ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
++ exit ;;
+ CRAY*T3E:*:*:*)
+- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
++ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
+ CRAY*SV1:*:*:*)
+- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
+- CRAY-2:*:*:*)
+- echo cray2-cray-unicos
+- exit 0 ;;
+- F300:UNIX_System_V:*:*)
++ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ *:UNICOS/mp:*:*)
++ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
++ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+- echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+- exit 0 ;;
+- F301:UNIX_System_V:*:*)
+- echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+- exit 0 ;;
+- hp300:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- i?86:BSD/386:*:* | i?86:BSD/OS:*:*)
++ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++ exit ;;
++ 5000:UNIX_System_V:4.*:*)
++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
++ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++ exit ;;
++ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:FreeBSD:*:*)
+- if test -x /usr/bin/objformat; then
+- if test "elf" = "`/usr/bin/objformat`"; then
+- echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
+- exit 0
+- fi
+- fi
+- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+- exit 0 ;;
+- *:OpenBSD:*:*)
+- echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+- exit 0 ;;
++ case ${UNAME_MACHINE} in
++ pc98)
++ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++ amd64)
++ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++ *)
++ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++ esac
++ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+- exit 0 ;;
+- i*:MINGW*:*)
++ exit ;;
++ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+- exit 0 ;;
++ exit ;;
++ i*:windows32*:*)
++ # uname -m includes "-pc" on this system.
++ echo ${UNAME_MACHINE}-mingw32
++ exit ;;
++ i*:PW*:*)
++ echo ${UNAME_MACHINE}-pc-pw32
++ exit ;;
++ *:Interix*:[3456]*)
++ case ${UNAME_MACHINE} in
++ x86)
++ echo i586-pc-interix${UNAME_RELEASE}
++ exit ;;
++ EM64T | authenticamd)
++ echo x86_64-unknown-interix${UNAME_RELEASE}
++ exit ;;
++ IA64)
++ echo ia64-unknown-interix${UNAME_RELEASE}
++ exit ;;
++ esac ;;
++ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
++ echo i${UNAME_MACHINE}-pc-mks
++ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+- echo i386-pc-interix
+- exit 0 ;;
++ echo i586-pc-interix
++ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+- exit 0 ;;
++ exit ;;
++ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
++ echo x86_64-unknown-cygwin
++ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+- exit 0 ;;
++ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+- exit 0 ;;
++ exit ;;
+ *:GNU:*:*)
++ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+- exit 0 ;;
+- *:Linux:*:*)
+-
++ exit ;;
++ *:GNU/*:*:*)
++ # other systems with GNU libc and userland
++ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
++ exit ;;
++ i*86:Minix:*:*)
++ echo ${UNAME_MACHINE}-pc-minix
++ exit ;;
++ arm*:Linux:*:*)
++ eval $set_cc_for_build
++ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ARM_EABI__
++ then
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ else
++ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
++ fi
++ exit ;;
++ avr32*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ cris:Linux:*:*)
++ echo cris-axis-linux-gnu
++ exit ;;
++ crisv32:Linux:*:*)
++ echo crisv32-axis-linux-gnu
++ exit ;;
++ frv:Linux:*:*)
++ echo frv-unknown-linux-gnu
++ exit ;;
++ ia64:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ m32r*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ m68*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ mips:Linux:*:*)
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #undef CPU
++ #undef mips
++ #undef mipsel
++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++ CPU=mipsel
++ #else
++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++ CPU=mips
++ #else
++ CPU=
++ #endif
++ #endif
++EOF
++ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
++ /^CPU/{
++ s: ::g
++ p
++ }'`"
++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
++ ;;
++ mips64:Linux:*:*)
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #undef CPU
++ #undef mips64
++ #undef mips64el
++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++ CPU=mips64el
++ #else
++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++ CPU=mips64
++ #else
++ CPU=
++ #endif
++ #endif
++EOF
++ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
++ /^CPU/{
++ s: ::g
++ p
++ }'`"
++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
++ ;;
++ or32:Linux:*:*)
++ echo or32-unknown-linux-gnu
++ exit ;;
++ ppc:Linux:*:*)
++ echo powerpc-unknown-linux-gnu
++ exit ;;
++ ppc64:Linux:*:*)
++ echo powerpc64-unknown-linux-gnu
++ exit ;;
++ alpha:Linux:*:*)
++ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
++ EV5) UNAME_MACHINE=alphaev5 ;;
++ EV56) UNAME_MACHINE=alphaev56 ;;
++ PCA56) UNAME_MACHINE=alphapca56 ;;
++ PCA57) UNAME_MACHINE=alphapca56 ;;
++ EV6) UNAME_MACHINE=alphaev6 ;;
++ EV67) UNAME_MACHINE=alphaev67 ;;
++ EV68*) UNAME_MACHINE=alphaev68 ;;
++ esac
++ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
++ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
++ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
++ exit ;;
++ parisc:Linux:*:* | hppa:Linux:*:*)
++ # Look for CPU level
++ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
++ PA7*) echo hppa1.1-unknown-linux-gnu ;;
++ PA8*) echo hppa2.0-unknown-linux-gnu ;;
++ *) echo hppa-unknown-linux-gnu ;;
++ esac
++ exit ;;
++ parisc64:Linux:*:* | hppa64:Linux:*:*)
++ echo hppa64-unknown-linux-gnu
++ exit ;;
++ s390:Linux:*:* | s390x:Linux:*:*)
++ echo ${UNAME_MACHINE}-ibm-linux
++ exit ;;
++ sh64*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ sh*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ sparc:Linux:*:* | sparc64:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ vax:Linux:*:*)
++ echo ${UNAME_MACHINE}-dec-linux-gnu
++ exit ;;
++ x86_64:Linux:*:*)
++ echo x86_64-unknown-linux-gnu
++ exit ;;
++ xtensa*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ i*86:Linux:*:*)
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+- ld_help_string=`cd /; ld --help 2>&1`
+- ld_supported_emulations=`echo $ld_help_string \
+- | sed -ne '/supported emulations:/!d
++ # Set LC_ALL=C to ensure ld outputs messages in English.
++ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
++ | sed -ne '/supported targets:/!d
+ s/[ ][ ]*/ /g
+- s/.*supported emulations: *//
++ s/.*supported targets: *//
+ s/ .*//
+ p'`
+- case "$ld_supported_emulations" in
+- *ia64)
+- echo "${UNAME_MACHINE}-unknown-linux"
+- exit 0
++ case "$ld_supported_targets" in
++ elf32-i386)
++ TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+ ;;
+- i?86linux)
++ a.out-i386-linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+- exit 0
+- ;;
+- i?86coff)
++ exit ;;
++ coff-i386)
+ echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+- exit 0
+- ;;
+- sparclinux)
+- echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+- exit 0
+- ;;
+- armlinux)
+- echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+- exit 0
+- ;;
+- elf32arm*)
+- echo "${UNAME_MACHINE}-unknown-linux-gnuoldld"
+- exit 0
+- ;;
+- armelf_linux*)
+- echo "${UNAME_MACHINE}-unknown-linux-gnu"
+- exit 0
+- ;;
+- m68klinux)
+- echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+- exit 0
+- ;;
+- elf32ppc | elf32ppclinux)
+- # Determine Lib Version
+- cat >$dummy.c <
+-#if defined(__GLIBC__)
+-extern char __libc_version[];
+-extern char __libc_release[];
+-#endif
+-main(argc, argv)
+- int argc;
+- char *argv[];
+-{
+-#if defined(__GLIBC__)
+- printf("%s %s\n", __libc_version, __libc_release);
+-#else
+- printf("unkown\n");
+-#endif
+- return 0;
+-}
+-EOF
+- LIBC=""
+- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+- if test "$?" = 0 ; then
+- ./$dummy | grep 1\.99 > /dev/null
+- if test "$?" = 0 ; then
+- LIBC="libc1"
+- fi
+- fi
+- rm -f $dummy.c $dummy
+- echo powerpc-unknown-linux-gnu${LIBC}
+- exit 0
+- ;;
++ exit ;;
++ "")
++ # Either a pre-BFD a.out linker (linux-gnuoldld) or
++ # one that does not give us useful --help.
++ echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
++ exit ;;
+ esac
+-
+- if test "${UNAME_MACHINE}" = "alpha" ; then
+- cat <$dummy.s
+- .data
+- \$Lformat:
+- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+-
+- .text
+- .globl main
+- .align 4
+- .ent main
+- main:
+- .frame \$30,16,\$26,0
+- ldgp \$29,0(\$27)
+- .prologue 1
+- .long 0x47e03d80 # implver \$0
+- lda \$2,-1
+- .long 0x47e20c21 # amask \$2,\$1
+- lda \$16,\$Lformat
+- mov \$0,\$17
+- not \$1,\$18
+- jsr \$26,printf
+- ldgp \$29,0(\$26)
+- mov 0,\$16
+- jsr \$26,exit
+- .end main
+-EOF
+- LIBC=""
+- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+- if test "$?" = 0 ; then
+- case `./$dummy` in
+- 0-0)
+- UNAME_MACHINE="alpha"
+- ;;
+- 1-0)
+- UNAME_MACHINE="alphaev5"
+- ;;
+- 1-1)
+- UNAME_MACHINE="alphaev56"
+- ;;
+- 1-101)
+- UNAME_MACHINE="alphapca56"
+- ;;
+- 2-303)
+- UNAME_MACHINE="alphaev6"
+- ;;
+- 2-307)
+- UNAME_MACHINE="alphaev67"
+- ;;
+- esac
+-
+- objdump --private-headers $dummy | \
+- grep ld.so.1 > /dev/null
+- if test "$?" = 0 ; then
+- LIBC="libc1"
+- fi
+- fi
+- rm -f $dummy.s $dummy
+- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+- elif test "${UNAME_MACHINE}" = "mips" ; then
+- cat >$dummy.c < /* for printf() prototype */
+- int main (int argc, char *argv[]) {
+-#else
+- int main (argc, argv) int argc; char *argv[]; {
+-#endif
+-#ifdef __MIPSEB__
+- printf ("%s-unknown-linux-gnu\n", argv[1]);
+-#endif
+-#ifdef __MIPSEL__
+- printf ("%sel-unknown-linux-gnu\n", argv[1]);
+-#endif
+- return 0;
+-}
+-EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
+- elif test "${UNAME_MACHINE}" = "s390"; then
+- echo s390-ibm-linux && exit 0
+- else
+- # Either a pre-BFD a.out linker (linux-gnuoldld)
+- # or one that does not give us useful --help.
+- # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+- # If ld does not provide *any* "supported emulations:"
+- # that means it is gnuoldld.
+- echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
+- test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+-
+- case "${UNAME_MACHINE}" in
+- i?86)
+- VENDOR=pc;
+- ;;
+- *)
+- VENDOR=unknown;
+- ;;
+- esac
+- # Determine whether the default compiler is a.out or elf
+- cat >$dummy.c <
+-#ifdef __cplusplus
+-#include /* for printf() prototype */
+- int main (int argc, char *argv[]) {
+-#else
+- int main (argc, argv) int argc; char *argv[]; {
+-#endif
+-#ifdef __ELF__
+-# ifdef __GLIBC__
+-# if __GLIBC__ >= 2
+- printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+-# else
+- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+-# endif
+-# else
+- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+-# endif
+-#else
+- printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+-#endif
+- return 0;
+-}
++ # Determine whether the default compiler is a.out or elf
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #include
++ #ifdef __ELF__
++ # ifdef __GLIBC__
++ # if __GLIBC__ >= 2
++ LIBC=gnu
++ # else
++ LIBC=gnulibc1
++ # endif
++ # else
++ LIBC=gnulibc1
++ # endif
++ #else
++ #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
++ LIBC=gnu
++ #else
++ LIBC=gnuaout
++ #endif
++ #endif
++ #ifdef __dietlibc__
++ LIBC=dietlibc
++ #endif
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
+- fi ;;
+-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
+-# are messed up and put the nodename in both sysname and nodename.
+- i?86:DYNIX/ptx:4*:*)
++ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
++ /^LIBC/{
++ s: ::g
++ p
++ }'`"
++ test x"${LIBC}" != x && {
++ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
++ exit
++ }
++ test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
++ ;;
++ i*86:DYNIX/ptx:4*:*)
++ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
++ # earlier versions are messed up and put the nodename in both
++ # sysname and nodename.
+ echo i386-sequent-sysv4
+- exit 0 ;;
+- i?86:UNIX_SV:4.2MP:2.*)
++ exit ;;
++ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+- exit 0 ;;
+- i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
++ exit ;;
++ i*86:OS/2:*:*)
++ # If we were able to find `uname', then EMX Unix compatibility
++ # is probably installed.
++ echo ${UNAME_MACHINE}-pc-os2-emx
++ exit ;;
++ i*86:XTS-300:*:STOP)
++ echo ${UNAME_MACHINE}-unknown-stop
++ exit ;;
++ i*86:atheos:*:*)
++ echo ${UNAME_MACHINE}-unknown-atheos
++ exit ;;
++ i*86:syllable:*:*)
++ echo ${UNAME_MACHINE}-pc-syllable
++ exit ;;
++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
++ echo i386-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ i*86:*DOS:*:*)
++ echo ${UNAME_MACHINE}-pc-msdosdjgpp
++ exit ;;
++ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+- exit 0 ;;
+- i?86:*:5:7*)
+- # Fixed at (any) Pentium or better
+- UNAME_MACHINE=i586
+- if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+- echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+- else
+- echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+- fi
+- exit 0 ;;
+- i?86:*:3.2:*)
++ exit ;;
++ i*86:*:5:[678]*)
++ # UnixWare 7.x, OpenUNIX and OpenServer 6.
++ case `/bin/uname -X | grep "^Machine"` in
++ *486*) UNAME_MACHINE=i486 ;;
++ *Pentium) UNAME_MACHINE=i586 ;;
++ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
++ esac
++ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
++ exit ;;
++ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then
+- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
++ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
++ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
++ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
++ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
++ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+- exit 0 ;;
+- i?86:*DOS:*:*)
+- echo ${UNAME_MACHINE}-pc-msdosdjgpp
+- exit 0 ;;
++ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i386.
+ echo i386-pc-msdosdjgpp
+- exit 0 ;;
++ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+- exit 0 ;;
++ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+- exit 0 ;;
++ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+- exit 0 ;;
++ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+- exit 0 ;;
+- M68*:*:R3V[567]*:*)
+- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+- 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
++ exit ;;
++ mc68k:UNIX:SYSTEM5:3.51m)
++ echo m68k-convergent-sysv
++ exit ;;
++ M680?0:D-NIX:5.3:*)
++ echo m68k-diab-dnix
++ exit ;;
++ M68*:*:R3V[5678]*:*)
++ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
++ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
++ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+- && echo i486-ncr-sysv4 && exit 0 ;;
+- m68*:LynxOS:2.*:*)
++ && { echo i486-ncr-sysv4; exit; } ;;
++ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+- exit 0 ;;
+- i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
+- echo i386-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
+- rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
++ exit ;;
++ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
++ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
++ echo powerpc-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+- exit 0 ;;
++ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+- exit 0 ;;
++ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+@@ -970,68 +1172,164 @@
+ else
+ echo ns32k-sni-sysv
+ fi
+- exit 0 ;;
+- PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+- # says
++ exit ;;
++ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
++ # says
+ echo i586-unisys-sysv4
+- exit 0 ;;
++ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes .
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+- exit 0 ;;
++ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+- exit 0 ;;
++ exit ;;
++ i*86:VOS:*:*)
++ # From Paul.Green@stratus.com.
++ echo ${UNAME_MACHINE}-stratus-vos
++ exit ;;
++ *:VOS:*:*)
++ # From Paul.Green@stratus.com.
++ echo hppa1.1-stratus-vos
++ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+- exit 0 ;;
+- news*:NEWS-OS:*:6*)
++ exit ;;
++ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+- exit 0 ;;
++ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+- exit 0 ;;
++ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+- exit 0 ;;
++ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+- exit 0 ;;
++ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+- exit 0 ;;
++ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
++ SX-6:SUPER-UX:*:*)
++ echo sx6-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-7:SUPER-UX:*:*)
++ echo sx7-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-8:SUPER-UX:*:*)
++ echo sx8-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-8R:SUPER-UX:*:*)
++ echo sx8r-nec-superux${UNAME_RELEASE}
++ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+- exit 0 ;;
+- Power*:Mac*OS:*:*)
+- echo powerpc-apple-macos${UNAME_RELEASE}
+- exit 0 ;;
+- *:Mac*OS:*:*)
+- echo ${UNAME_MACHINE}-apple-macos${UNAME_RELEASE}
+- exit 0 ;;
++ exit ;;
++ *:Darwin:*:*)
++ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
++ case $UNAME_PROCESSOR in
++ unknown) UNAME_PROCESSOR=powerpc ;;
++ esac
++ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
++ exit ;;
++ *:procnto*:*:* | *:QNX:[0123456789]*:*)
++ UNAME_PROCESSOR=`uname -p`
++ if test "$UNAME_PROCESSOR" = "x86"; then
++ UNAME_PROCESSOR=i386
++ UNAME_MACHINE=pc
++ fi
++ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
++ exit ;;
+ *:QNX:*:4*)
+- echo i386-qnx-qnx${UNAME_VERSION}
+- exit 0 ;;
++ echo i386-pc-qnx
++ exit ;;
++ NSE-?:NONSTOP_KERNEL:*:*)
++ echo nse-tandem-nsk${UNAME_RELEASE}
++ exit ;;
++ NSR-?:NONSTOP_KERNEL:*:*)
++ echo nsr-tandem-nsk${UNAME_RELEASE}
++ exit ;;
++ *:NonStop-UX:*:*)
++ echo mips-compaq-nonstopux
++ exit ;;
++ BS2000:POSIX*:*:*)
++ echo bs2000-siemens-sysv
++ exit ;;
++ DS/*:UNIX_System_V:*:*)
++ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
++ exit ;;
++ *:Plan9:*:*)
++ # "uname -m" is not consistent, so use $cputype instead. 386
++ # is converted to i386 for consistency with other x86
++ # operating systems.
++ if test "$cputype" = "386"; then
++ UNAME_MACHINE=i386
++ else
++ UNAME_MACHINE="$cputype"
++ fi
++ echo ${UNAME_MACHINE}-unknown-plan9
++ exit ;;
++ *:TOPS-10:*:*)
++ echo pdp10-unknown-tops10
++ exit ;;
++ *:TENEX:*:*)
++ echo pdp10-unknown-tenex
++ exit ;;
++ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
++ echo pdp10-dec-tops20
++ exit ;;
++ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
++ echo pdp10-xkl-tops20
++ exit ;;
++ *:TOPS-20:*:*)
++ echo pdp10-unknown-tops20
++ exit ;;
++ *:ITS:*:*)
++ echo pdp10-unknown-its
++ exit ;;
++ SEI:*:*:SEIUX)
++ echo mips-sei-seiux${UNAME_RELEASE}
++ exit ;;
++ *:DragonFly:*:*)
++ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
++ exit ;;
++ *:*VMS:*:*)
++ UNAME_MACHINE=`(uname -p) 2>/dev/null`
++ case "${UNAME_MACHINE}" in
++ A*) echo alpha-dec-vms ; exit ;;
++ I*) echo ia64-dec-vms ; exit ;;
++ V*) echo vax-dec-vms ; exit ;;
++ esac ;;
++ *:XENIX:*:SysV)
++ echo i386-pc-xenix
++ exit ;;
++ i*86:skyos:*:*)
++ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
++ exit ;;
++ i*86:rdos:*:*)
++ echo ${UNAME_MACHINE}-pc-rdos
++ exit ;;
+ esac
+
+ #echo '(No uname command or uname output not recognized.)' 1>&2
+ #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
++eval $set_cc_for_build
+ cat >$dummy.c <
+@@ -1057,7 +1355,7 @@
+ #endif
+
+ #if defined (__arm) && defined (__acorn) && defined (__unix)
+- printf ("arm-acorn-riscix"); exit (0);
++ printf ("arm-acorn-riscix\n"); exit (0);
+ #endif
+
+ #if defined (hp300) && !defined (hpux)
+@@ -1118,11 +1416,24 @@
+ #endif
+
+ #if defined (vax)
+-#if !defined (ultrix)
+- printf ("vax-dec-bsd\n"); exit (0);
+-#else
+- printf ("vax-dec-ultrix\n"); exit (0);
+-#endif
++# if !defined (ultrix)
++# include
++# if defined (BSD)
++# if BSD == 43
++ printf ("vax-dec-bsd4.3\n"); exit (0);
++# else
++# if BSD == 199006
++ printf ("vax-dec-bsd4.3reno\n"); exit (0);
++# else
++ printf ("vax-dec-bsd\n"); exit (0);
++# endif
++# endif
++# else
++ printf ("vax-dec-bsd\n"); exit (0);
++# endif
++# else
++ printf ("vax-dec-ultrix\n"); exit (0);
++# endif
+ #endif
+
+ #if defined (alliant) && defined (i860)
+@@ -1133,12 +1444,12 @@
+ }
+ EOF
+
+-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+-rm -f $dummy.c $dummy
++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
++ { echo "$SYSTEM_NAME"; exit; }
+
+ # Apollos put the system type in the environment.
+
+-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+ # Convex versions that predate uname can use getsysinfo(1)
+
+@@ -1147,25 +1458,69 @@
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+- exit 0 ;;
++ exit ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+- exit 0 ;;
++ exit ;;
+ c34*)
+ echo c34-convex-bsd
+- exit 0 ;;
++ exit ;;
+ c38*)
+ echo c38-convex-bsd
+- exit 0 ;;
++ exit ;;
+ c4*)
+ echo c4-convex-bsd
+- exit 0 ;;
++ exit ;;
+ esac
+ fi
+
+-#echo '(Unable to guess system type)' 1>&2
++cat >&2 < in order to provide the needed
++information to handle your system.
++
++config.guess timestamp = $timestamp
++
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
++
++hostinfo = `(hostinfo) 2>/dev/null`
++/bin/universe = `(/bin/universe) 2>/dev/null`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
++/bin/arch = `(/bin/arch) 2>/dev/null`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
++
++UNAME_MACHINE = ${UNAME_MACHINE}
++UNAME_RELEASE = ${UNAME_RELEASE}
++UNAME_SYSTEM = ${UNAME_SYSTEM}
++UNAME_VERSION = ${UNAME_VERSION}
++EOF
+
+ exit 1
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:
+diff -urNad ecosconfig-imx~/acsupport/config.sub ecosconfig-imx/acsupport/config.sub
+--- ecosconfig-imx~/acsupport/config.sub 2009-03-16 13:17:55.000000000 -0400
++++ ecosconfig-imx/acsupport/config.sub 2009-03-16 13:31:51.126305004 -0400
+@@ -1,8 +1,11 @@
+ #! /bin/sh
+-# Configuration validation subroutine script, version 1.1.
+-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
++# Configuration validation subroutine script.
++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+ # Free Software Foundation, Inc.
+-#
++
++timestamp='2008-01-16'
++
+ # This file is (in principle) common to ALL GNU software.
+ # The presence of a machine in this file suggests that SOME GNU software
+ # can handle that machine. It does not imply ALL GNU software can.
+@@ -19,16 +22,17 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330,
+-# Boston, MA 02111-1307, USA.
+-
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
++#
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
+-# Written by Per Bothner .
+-# Please send patches to .
++
++# Please send patches to . Submit a context
++# diff and a properly formatted ChangeLog entry.
+ #
+ # Configuration subroutine to validate and canonicalize a configuration type.
+ # Supply the specified configuration type as an argument.
+@@ -50,30 +54,75 @@
+ # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+ # It is wrong to echo any other type of specification.
+
+-if [ x$1 = x ]
+-then
+- echo Configuration name missing. 1>&2
+- echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
+- echo "or $0 ALIAS" 1>&2
+- echo where ALIAS is a recognized configuration type. 1>&2
+- exit 1
+-fi
++me=`echo "$0" | sed -e 's,.*/,,'`
+
+-# First pass through any local machine types.
+-case $1 in
+- *local*)
+- echo $1
+- exit 0
+- ;;
+- *)
+- ;;
++usage="\
++Usage: $0 [OPTION] CPU-MFR-OPSYS
++ $0 [OPTION] ALIAS
++
++Canonicalize a configuration name.
++
++Operation modes:
++ -h, --help print this help, then exit
++ -t, --time-stamp print date of last modification, then exit
++ -v, --version print version number, then exit
++
++Report bugs and patches to ."
++
++version="\
++GNU config.sub ($timestamp)
++
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
++2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++
++This is free software; see the source for copying conditions. There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++ case $1 in
++ --time-stamp | --time* | -t )
++ echo "$timestamp" ; exit ;;
++ --version | -v )
++ echo "$version" ; exit ;;
++ --help | --h* | -h )
++ echo "$usage"; exit ;;
++ -- ) # Stop option processing
++ shift; break ;;
++ - ) # Use stdin as input.
++ break ;;
++ -* )
++ echo "$me: invalid option $1$help"
++ exit 1 ;;
++
++ *local*)
++ # First pass through any local machine types.
++ echo $1
++ exit ;;
++
++ * )
++ break ;;
++ esac
++done
++
++case $# in
++ 0) echo "$me: missing argument$help" >&2
++ exit 1;;
++ 1) ;;
++ *) echo "$me: too many arguments$help" >&2
++ exit 1;;
+ esac
+
+ # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+ # Here we must recognize all the valid KERNEL-OS combinations.
+ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+ case $maybe_os in
+- linux-gnu*)
++ nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
++ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
++ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+@@ -99,7 +148,7 @@
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+- -apple)
++ -apple | -axis | -knuth | -cray)
+ os=
+ basic_machine=$1
+ ;;
+@@ -113,9 +162,21 @@
+ os=-vxworks
+ basic_machine=$1
+ ;;
++ -chorusos*)
++ os=-chorusos
++ basic_machine=$1
++ ;;
++ -chorusrdb)
++ os=-chorusrdb
++ basic_machine=$1
++ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
++ -sco6)
++ os=-sco5v6
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+@@ -132,6 +193,10 @@
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
++ -sco5v6*)
++ # Don't forget version if it is 3.2v4 or newer.
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+@@ -171,28 +236,74 @@
+ case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+- tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
+- | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
+- | 580 | i960 | h8300 \
+- | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+- | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
+- | alphaev6[78] \
+- | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
+- | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
+- | mips64orion | mips64orionel | mipstx39 | mipstx39el \
+- | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+- | mips64vr5000 | miprs64vr5000el | mcore \
+- | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+- | thumb | d10v | fr30 | avr)
++ 1750a | 580 \
++ | a29k \
++ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
++ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
++ | am33_2.0 \
++ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
++ | bfin \
++ | c4x | clipper \
++ | d10v | d30v | dlx | dsp16xx \
++ | fido | fr30 | frv \
++ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
++ | i370 | i860 | i960 | ia64 \
++ | ip2k | iq2000 \
++ | m32c | m32r | m32rle | m68000 | m68k | m88k \
++ | maxq | mb | microblaze | mcore | mep \
++ | mips | mipsbe | mipseb | mipsel | mipsle \
++ | mips16 \
++ | mips64 | mips64el \
++ | mips64vr | mips64vrel \
++ | mips64orion | mips64orionel \
++ | mips64vr4100 | mips64vr4100el \
++ | mips64vr4300 | mips64vr4300el \
++ | mips64vr5000 | mips64vr5000el \
++ | mips64vr5900 | mips64vr5900el \
++ | mipsisa32 | mipsisa32el \
++ | mipsisa32r2 | mipsisa32r2el \
++ | mipsisa64 | mipsisa64el \
++ | mipsisa64r2 | mipsisa64r2el \
++ | mipsisa64sb1 | mipsisa64sb1el \
++ | mipsisa64sr71k | mipsisa64sr71kel \
++ | mipstx39 | mipstx39el \
++ | mn10200 | mn10300 \
++ | mt \
++ | msp430 \
++ | nios | nios2 \
++ | ns16k | ns32k \
++ | or32 \
++ | pdp10 | pdp11 | pj | pjl \
++ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
++ | pyramid \
++ | score \
++ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
++ | sh64 | sh64le \
++ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
++ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
++ | spu | strongarm \
++ | tahoe | thumb | tic4x | tic80 | tron \
++ | v850 | v850e \
++ | we32k \
++ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
++ | z8k)
+ basic_machine=$basic_machine-unknown
+ ;;
+- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
++ m6811 | m68hc11 | m6812 | m68hc12)
++ # Motorola 68HC11/12.
++ basic_machine=$basic_machine-unknown
++ os=-none
++ ;;
++ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
++ ;;
++ ms1)
++ basic_machine=mt-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+- i[34567]86)
++ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+@@ -201,25 +312,70 @@
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+- # FIXME: clean up the formatting here.
+- vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+- | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
+- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+- | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+- | xmp-* | ymp-* \
+- | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \
+- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
+- | alphaev6[78]-* \
+- | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+- | clipper-* | orion-* \
+- | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+- | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+- | mips64el-* | mips64orion-* | mips64orionel-* \
+- | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+- | mipstx39-* | mipstx39el-* | mcore-* \
+- | f301-* | armv*-* | s390-* | sv1-* | t3e-* \
+- | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+- | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* )
++ 580-* \
++ | a29k-* \
++ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
++ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
++ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
++ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
++ | avr-* | avr32-* \
++ | bfin-* | bs2000-* \
++ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
++ | clipper-* | craynv-* | cydra-* \
++ | d10v-* | d30v-* | dlx-* \
++ | elxsi-* \
++ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
++ | h8300-* | h8500-* \
++ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
++ | i*86-* | i860-* | i960-* | ia64-* \
++ | ip2k-* | iq2000-* \
++ | m32c-* | m32r-* | m32rle-* \
++ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
++ | m88110-* | m88k-* | maxq-* | mcore-* \
++ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
++ | mips16-* \
++ | mips64-* | mips64el-* \
++ | mips64vr-* | mips64vrel-* \
++ | mips64orion-* | mips64orionel-* \
++ | mips64vr4100-* | mips64vr4100el-* \
++ | mips64vr4300-* | mips64vr4300el-* \
++ | mips64vr5000-* | mips64vr5000el-* \
++ | mips64vr5900-* | mips64vr5900el-* \
++ | mipsisa32-* | mipsisa32el-* \
++ | mipsisa32r2-* | mipsisa32r2el-* \
++ | mipsisa64-* | mipsisa64el-* \
++ | mipsisa64r2-* | mipsisa64r2el-* \
++ | mipsisa64sb1-* | mipsisa64sb1el-* \
++ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
++ | mipstx39-* | mipstx39el-* \
++ | mmix-* \
++ | mt-* \
++ | msp430-* \
++ | nios-* | nios2-* \
++ | none-* | np1-* | ns16k-* | ns32k-* \
++ | orion-* \
++ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
++ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
++ | pyramid-* \
++ | romp-* | rs6000-* \
++ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
++ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
++ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
++ | sparclite-* \
++ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
++ | tahoe-* | thumb-* \
++ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
++ | tron-* \
++ | v850-* | v850e-* | vax-* \
++ | we32k-* \
++ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
++ | xstormy16-* | xtensa*-* \
++ | ymp-* \
++ | z8k-*)
++ ;;
++ # Recognize the basic CPU types without company name, with glob match.
++ xtensa*)
++ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+@@ -237,6 +393,9 @@
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
++ abacus)
++ basic_machine=abacus-unknown
++ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+@@ -251,19 +410,25 @@
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
++ amd64)
++ basic_machine=x86_64-pc
++ ;;
++ amd64-*)
++ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+- basic_machine=m68k-cbm
++ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+- basic_machine=m68k-cbm
++ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+- basic_machine=m68k-cbm
++ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+@@ -282,6 +447,18 @@
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
++ blackfin)
++ basic_machine=bfin-unknown
++ os=-linux
++ ;;
++ blackfin-*)
++ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
++ os=-linux
++ ;;
++ c90)
++ basic_machine=c90-cray
++ os=-unicos
++ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+@@ -302,27 +479,45 @@
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+- cray | ymp)
+- basic_machine=ymp-cray
++ cray | j90)
++ basic_machine=j90-cray
+ os=-unicos
+ ;;
+- cray2)
+- basic_machine=cray2-cray
+- os=-unicos
++ craynv)
++ basic_machine=craynv-cray
++ os=-unicosmp
+ ;;
+- [ctj]90-cray)
+- basic_machine=c90-cray
+- os=-unicos
++ cr16)
++ basic_machine=cr16-unknown
++ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
++ crisv32 | crisv32-* | etraxfs*)
++ basic_machine=crisv32-axis
++ ;;
++ cris | cris-* | etrax*)
++ basic_machine=cris-axis
++ ;;
++ crx)
++ basic_machine=crx-unknown
++ os=-elf
++ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
++ decsystem10* | dec10*)
++ basic_machine=pdp10-dec
++ os=-tops10
++ ;;
++ decsystem20* | dec20*)
++ basic_machine=pdp10-dec
++ os=-tops20
++ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+@@ -331,6 +526,10 @@
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
++ djgpp)
++ basic_machine=i586-pc
++ os=-msdosdjgpp
++ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+@@ -364,6 +563,10 @@
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
++ go32)
++ basic_machine=i386-pc
++ os=-go32
++ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+@@ -439,19 +642,19 @@
+ basic_machine=i370-ibm
+ ;;
+ # I'm not sure what "Sysv32" means. Should this be sysv3.2?
+- i[34567]86v32)
++ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+- i[34567]86v4*)
++ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+- i[34567]86v)
++ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+- i[34567]86sol2)
++ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+@@ -463,17 +666,6 @@
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+- i386-go32 | go32)
+- basic_machine=i386-unknown
+- os=-go32
+- ;;
+- i386-mingw32 | mingw32)
+- basic_machine=i386-unknown
+- os=-mingw32
+- ;;
+- i386-qnx | qnx)
+- basic_machine=i386-qnx
+- ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+@@ -488,6 +680,14 @@
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
++ m68knommu)
++ basic_machine=m68k-unknown
++ os=-linux
++ ;;
++ m68knommu-*)
++ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
++ os=-linux
++ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+@@ -499,6 +699,14 @@
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
++ mingw32)
++ basic_machine=i386-pc
++ os=-mingw32
++ ;;
++ mingw32ce)
++ basic_machine=arm-unknown
++ os=-mingw32ce
++ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+@@ -506,32 +714,27 @@
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+- mipsel*-linux*)
+- basic_machine=mipsel-unknown
+- os=-linux-gnu
+- ;;
+- mips*-linux*)
+- basic_machine=mips-unknown
+- os=-linux-gnu
+- ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+- mmix*)
+- basic_machine=mmix-knuth
+- os=-mmixware
+- ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
++ morphos)
++ basic_machine=powerpc-unknown
++ os=-morphos
++ ;;
+ msdos)
+- basic_machine=i386-unknown
++ basic_machine=i386-pc
+ os=-msdos
+ ;;
++ ms1-*)
++ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
++ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+@@ -593,13 +796,27 @@
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
++ nonstopux)
++ basic_machine=mips-compaq
++ os=-nonstopux
++ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
++ nsr-tandem)
++ basic_machine=nsr-tandem
++ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
++ openrisc | openrisc-*)
++ basic_machine=or32-unknown
++ ;;
++ os400)
++ basic_machine=powerpc-ibm
++ os=-os400
++ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+@@ -616,51 +833,89 @@
+ basic_machine=i860-intel
+ os=-osf
+ ;;
++ parisc)
++ basic_machine=hppa-unknown
++ os=-linux
++ ;;
++ parisc-*)
++ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
++ os=-linux
++ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+- pc532 | pc532-*)
++ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+- pentium | p5 | k5 | k6 | nexen)
++ pc98)
++ basic_machine=i386-pc
++ ;;
++ pc98-*)
++ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+- pentiumpro | p6 | 6x86)
++ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+- pentiumii | pentium2)
++ pentiumii | pentium2 | pentiumiii | pentium3)
++ basic_machine=i686-pc
++ ;;
++ pentium4)
+ basic_machine=i786-pc
+ ;;
+- pentium-* | p5-* | k5-* | k6-* | nexen-*)
++ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+- pentiumpro-* | p6-* | 6x86-*)
++ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+- pentiumii-* | pentium2-*)
++ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
++ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+- power) basic_machine=rs6000-ibm
++ power) basic_machine=power-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+- ;;
++ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+- ;;
++ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
++ ppc64) basic_machine=powerpc64-unknown
++ ;;
++ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
++ basic_machine=powerpc64le-unknown
++ ;;
++ ppc64le-* | powerpc64little-*)
++ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
++ pw32)
++ basic_machine=i586-unknown
++ os=-pw32
++ ;;
++ rdos)
++ basic_machine=i386-pc
++ os=-rdos
++ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+@@ -671,10 +926,30 @@
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
++ s390 | s390-*)
++ basic_machine=s390-ibm
++ ;;
++ s390x | s390x-*)
++ basic_machine=s390x-ibm
++ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
++ sb1)
++ basic_machine=mipsisa64sb1-unknown
++ ;;
++ sb1el)
++ basic_machine=mipsisa64sb1el-unknown
++ ;;
++ sde)
++ basic_machine=mipsisa32-sde
++ os=-elf
++ ;;
++ sei)
++ basic_machine=mips-sei
++ os=-seiux
++ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+@@ -682,7 +957,13 @@
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+- sparclite-wrs)
++ sh5el)
++ basic_machine=sh5le-unknown
++ ;;
++ sh64)
++ basic_machine=sh64-unknown
++ ;;
++ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+@@ -749,18 +1030,46 @@
+ os=-dynix
+ ;;
+ t3e)
+- basic_machine=t3e-cray
++ basic_machine=alphaev5-cray
++ os=-unicos
++ ;;
++ t90)
++ basic_machine=t90-cray
+ os=-unicos
+ ;;
++ tic54x | c54x*)
++ basic_machine=tic54x-unknown
++ os=-coff
++ ;;
++ tic55x | c55x*)
++ basic_machine=tic55x-unknown
++ os=-coff
++ ;;
++ tic6x | c6x*)
++ basic_machine=tic6x-unknown
++ os=-coff
++ ;;
++ tile*)
++ basic_machine=tile-unknown
++ os=-linux-gnu
++ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
++ toad1)
++ basic_machine=pdp10-xkl
++ os=-tops20
++ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
++ tpf)
++ basic_machine=s390x-ibm
++ os=-tpf
++ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+@@ -782,8 +1091,8 @@
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+- basic_machine=f301-fujitsu
+- ;;
++ basic_machine=f301-fujitsu
++ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+@@ -804,13 +1113,17 @@
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+- xmp)
+- basic_machine=xmp-cray
+- os=-unicos
++ xbox)
++ basic_machine=i686-pc
++ os=-mingw32
+ ;;
+- xps | xps100)
++ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
++ ymp)
++ basic_machine=ymp-cray
++ os=-unicos
++ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+@@ -831,32 +1144,35 @@
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+- mips)
+- if [ x$os = x-linux-gnu ]; then
+- basic_machine=mips-unknown
+- else
+- basic_machine=mips-mips
+- fi
+- ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
++ mmix)
++ basic_machine=mmix-knuth
++ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
++ pdp10)
++ # there are many clones, so DEC is not a safe bet
++ basic_machine=pdp10-unknown
++ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+- sparc | sparcv9)
++ sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
++ basic_machine=sh-unknown
++ ;;
++ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+- cydra)
++ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+@@ -871,9 +1187,8 @@
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+- c4x*)
+- basic_machine=c4x-none
+- os=-coff
++ *-unknown)
++ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+@@ -927,22 +1242,49 @@
+ | -aos* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
++ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
++ | -openbsd* | -solidbsd* \
++ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
++ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
++ | -chorusos* | -chorusrdb* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+- | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*)
++ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
++ | -uxpv* | -beos* | -mpeix* | -udk* \
++ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
++ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
++ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
++ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
++ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
++ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
++ | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
++ -qnx*)
++ case $basic_machine in
++ x86-* | i*86-*)
++ ;;
++ *)
++ os=-nto$os
++ ;;
++ esac
++ ;;
++ -nto-qnx*)
++ ;;
++ -nto*)
++ os=`echo $os | sed -e 's|nto|nto-qnx|'`
++ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
++ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
++ -linux-dietlibc)
++ os=-linux-dietlibc
++ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+@@ -955,6 +1297,9 @@
+ -opened*)
+ os=-openedition
+ ;;
++ -os400*)
++ os=-os400
++ ;;
+ -wince*)
+ os=-wince
+ ;;
+@@ -973,14 +1318,26 @@
+ -acis*)
+ os=-aos
+ ;;
++ -atheos*)
++ os=-atheos
++ ;;
++ -syllable*)
++ os=-syllable
++ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
++ -nova*)
++ os=-rtmk-nova
++ ;;
+ -ns2 )
+- os=-nextstep2
++ os=-nextstep2
++ ;;
++ -nsk*)
++ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+@@ -989,15 +1346,15 @@
+ -sinix*)
+ os=-sysv4
+ ;;
++ -tpf*)
++ os=-tpf
++ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+- -qnx)
+- os=-qnx4
+- ;;
+ -svr4)
+ os=-sysv4
+ ;;
+@@ -1019,8 +1376,17 @@
+ -xenix)
+ os=-xenix
+ ;;
+- -*mint | -*MiNT)
+- os=-mint
++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++ os=-mint
++ ;;
++ -aros*)
++ os=-aros
++ ;;
++ -kaos*)
++ os=-kaos
++ ;;
++ -zvmoe)
++ os=-zvmoe
+ ;;
+ -none)
+ ;;
+@@ -1044,6 +1410,12 @@
+ # system, and we'll never get to this point.
+
+ case $basic_machine in
++ score-*)
++ os=-elf
++ ;;
++ spu-*)
++ os=-elf
++ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+@@ -1053,7 +1425,14 @@
+ arm*-semi)
+ os=-aout
+ ;;
+- pdp11-*)
++ c4x-* | tic4x-*)
++ os=-coff
++ ;;
++ # This must come before the *-dec entry.
++ pdp10-*)
++ os=-tops20
++ ;;
++ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+@@ -1074,12 +1453,18 @@
+ m68*-cisco)
+ os=-aout
+ ;;
++ mep-*)
++ os=-elf
++ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
++ or32-*)
++ os=-coff
++ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+@@ -1089,9 +1474,15 @@
+ *-be)
+ os=-beos
+ ;;
++ *-haiku)
++ os=-haiku
++ ;;
+ *-ibm)
+ os=-aix
+ ;;
++ *-knuth)
++ os=-mmixware
++ ;;
+ *-wec)
+ os=-proelf
+ ;;
+@@ -1143,25 +1534,25 @@
+ *-next)
+ os=-nextstep3
+ ;;
+- *-gould)
++ *-gould)
+ os=-sysv
+ ;;
+- *-highlevel)
++ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+- *-sgi)
++ *-sgi)
+ os=-irix
+ ;;
+- *-siemens)
++ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+- f301-fujitsu)
++ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+@@ -1224,10 +1615,16 @@
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
++ -os400*)
++ vendor=ibm
++ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+- -vxsim* | -vxworks*)
++ -tpf*)
++ vendor=ibm
++ ;;
++ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+@@ -1239,12 +1636,23 @@
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+- -*mint | -*MiNT)
++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
++ -vos*)
++ vendor=stratus
++ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+ esac
+
+ echo $basic_machine$os
++exit
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:
+diff -urNad ecosconfig-imx~/acsupport/install-sh ecosconfig-imx/acsupport/install-sh
+--- ecosconfig-imx~/acsupport/install-sh 2009-03-16 13:17:55.000000000 -0400
++++ ecosconfig-imx/acsupport/install-sh 2009-03-16 13:31:51.130305723 -0400
+@@ -1,251 +1,519 @@
+ #!/bin/sh
+-#
+ # install - install a program, script, or datafile
+-# This comes from X11R5 (mit/util/scripts/install.sh).
++
++scriptversion=2006-12-25.00
++
++# This originates from X11R5 (mit/util/scripts/install.sh), which was
++# later released in X11R6 (xc/config/util/install.sh) with the
++# following copyright and license.
+ #
+-# Copyright 1991 by the Massachusetts Institute of Technology
++# Copyright (C) 1994 X Consortium
+ #
+-# Permission to use, copy, modify, distribute, and sell this software and its
+-# documentation for any purpose is hereby granted without fee, provided that
+-# the above copyright notice appear in all copies and that both that
+-# copyright notice and this permission notice appear in supporting
+-# documentation, and that the name of M.I.T. not be used in advertising or
+-# publicity pertaining to distribution of the software without specific,
+-# written prior permission. M.I.T. makes no representations about the
+-# suitability of this software for any purpose. It is provided "as is"
+-# without express or implied warranty.
++# Permission is hereby granted, free of charge, to any person obtaining a copy
++# of this software and associated documentation files (the "Software"), to
++# deal in the Software without restriction, including without limitation the
++# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
++# sell copies of the Software, and to permit persons to whom the Software is
++# furnished to do so, subject to the following conditions:
++#
++# The above copyright notice and this permission notice shall be included in
++# all copies or substantial portions of the Software.
++#
++# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
++# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
++# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++#
++# Except as contained in this notice, the name of the X Consortium shall not
++# be used in advertising or otherwise to promote the sale, use or other deal-
++# ings in this Software without prior written authorization from the X Consor-
++# tium.
++#
++#
++# FSF changes to this file are in the public domain.
+ #
+ # Calling this script install-sh is preferred over install.sh, to prevent
+ # `make' implicit rules from creating a file called install from it
+ # when there is no Makefile.
+ #
+ # This script is compatible with the BSD install script, but was written
+-# from scratch. It can only install one file at a time, a restriction
+-# shared with many OS's install programs.
++# from scratch.
+
++nl='
++'
++IFS=" "" $nl"
+
+ # set DOITPROG to echo to test this script
+
+ # Don't use :- since 4.3BSD and earlier shells don't like it.
+-doit="${DOITPROG-}"
++doit=${DOITPROG-}
++if test -z "$doit"; then
++ doit_exec=exec
++else
++ doit_exec=$doit
++fi
+
++# Put in absolute file names if you don't have them in your path;
++# or use environment vars.
+
+-# put in absolute paths if you don't have them in your path; or use env. vars.
++chgrpprog=${CHGRPPROG-chgrp}
++chmodprog=${CHMODPROG-chmod}
++chownprog=${CHOWNPROG-chown}
++cmpprog=${CMPPROG-cmp}
++cpprog=${CPPROG-cp}
++mkdirprog=${MKDIRPROG-mkdir}
++mvprog=${MVPROG-mv}
++rmprog=${RMPROG-rm}
++stripprog=${STRIPPROG-strip}
+
+-mvprog="${MVPROG-mv}"
+-cpprog="${CPPROG-cp}"
+-chmodprog="${CHMODPROG-chmod}"
+-chownprog="${CHOWNPROG-chown}"
+-chgrpprog="${CHGRPPROG-chgrp}"
+-stripprog="${STRIPPROG-strip}"
+-rmprog="${RMPROG-rm}"
+-mkdirprog="${MKDIRPROG-mkdir}"
++posix_glob='?'
++initialize_posix_glob='
++ test "$posix_glob" != "?" || {
++ if (set -f) 2>/dev/null; then
++ posix_glob=
++ else
++ posix_glob=:
++ fi
++ }
++'
+
+-transformbasename=""
+-transform_arg=""
+-instcmd="$mvprog"
+-chmodcmd="$chmodprog 0755"
+-chowncmd=""
+-chgrpcmd=""
+-stripcmd=""
++posix_mkdir=
++
++# Desired mode of installed file.
++mode=0755
++
++chgrpcmd=
++chmodcmd=$chmodprog
++chowncmd=
++mvcmd=$mvprog
+ rmcmd="$rmprog -f"
+-mvcmd="$mvprog"
+-src=""
+-dst=""
+-dir_arg=""
++stripcmd=
+
+-while [ x"$1" != x ]; do
+- case $1 in
+- -c) instcmd="$cpprog"
+- shift
+- continue;;
++src=
++dst=
++dir_arg=
++dst_arg=
+
+- -d) dir_arg=true
+- shift
+- continue;;
++copy_on_change=false
++no_target_directory=
+
+- -m) chmodcmd="$chmodprog $2"
+- shift
+- shift
+- continue;;
++usage="\
++Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
++ or: $0 [OPTION]... SRCFILES... DIRECTORY
++ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
++ or: $0 [OPTION]... -d DIRECTORIES...
+
+- -o) chowncmd="$chownprog $2"
+- shift
+- shift
+- continue;;
++In the 1st form, copy SRCFILE to DSTFILE.
++In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
++In the 4th, create DIRECTORIES.
+
+- -g) chgrpcmd="$chgrpprog $2"
+- shift
+- shift
+- continue;;
++Options:
++ --help display this help and exit.
++ --version display version info and exit.
+
+- -s) stripcmd="$stripprog"
+- shift
+- continue;;
++ -c (ignored)
++ -C install only if different (preserve the last data modification time)
++ -d create directories instead of installing files.
++ -g GROUP $chgrpprog installed files to GROUP.
++ -m MODE $chmodprog installed files to MODE.
++ -o USER $chownprog installed files to USER.
++ -s $stripprog installed files.
++ -t DIRECTORY install into DIRECTORY.
++ -T report an error if DSTFILE is a directory.
+
+- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+- shift
+- continue;;
++Environment variables override the default commands:
++ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
++ RMPROG STRIPPROG
++"
+
+- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+- shift
+- continue;;
++while test $# -ne 0; do
++ case $1 in
++ -c) ;;
+
+- *) if [ x"$src" = x ]
+- then
+- src=$1
+- else
+- # this colon is to work around a 386BSD /bin/sh bug
+- :
+- dst=$1
+- fi
+- shift
+- continue;;
+- esac
++ -C) copy_on_change=true;;
++
++ -d) dir_arg=true;;
++
++ -g) chgrpcmd="$chgrpprog $2"
++ shift;;
++
++ --help) echo "$usage"; exit $?;;
++
++ -m) mode=$2
++ case $mode in
++ *' '* | *' '* | *'
++'* | *'*'* | *'?'* | *'['*)
++ echo "$0: invalid mode: $mode" >&2
++ exit 1;;
++ esac
++ shift;;
++
++ -o) chowncmd="$chownprog $2"
++ shift;;
++
++ -s) stripcmd=$stripprog;;
++
++ -t) dst_arg=$2
++ shift;;
++
++ -T) no_target_directory=true;;
++
++ --version) echo "$0 $scriptversion"; exit $?;;
++
++ --) shift
++ break;;
++
++ -*) echo "$0: invalid option: $1" >&2
++ exit 1;;
++
++ *) break;;
++ esac
++ shift
+ done
+
+-if [ x"$src" = x ]
+-then
+- echo "install: no input file specified"
+- exit 1
+-else
+- true
++if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
++ # When -d is used, all remaining arguments are directories to create.
++ # When -t is used, the destination is already specified.
++ # Otherwise, the last argument is the destination. Remove it from $@.
++ for arg
++ do
++ if test -n "$dst_arg"; then
++ # $@ is not empty: it contains at least $arg.
++ set fnord "$@" "$dst_arg"
++ shift # fnord
++ fi
++ shift # arg
++ dst_arg=$arg
++ done
+ fi
+
+-if [ x"$dir_arg" != x ]; then
+- dst=$src
+- src=""
+-
+- if [ -d $dst ]; then
+- instcmd=:
+- chmodcmd=""
+- else
+- instcmd=mkdir
+- fi
+-else
+-
+-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+-# might cause directories to be created, which would be especially bad
+-# if $src (and thus $dsttmp) contains '*'.
++if test $# -eq 0; then
++ if test -z "$dir_arg"; then
++ echo "$0: no input file specified." >&2
++ exit 1
++ fi
++ # It's OK to call `install-sh -d' without argument.
++ # This can happen when creating conditional directories.
++ exit 0
++fi
+
+- if [ -f $src -o -d $src ]
+- then
+- true
+- else
+- echo "install: $src does not exist"
+- exit 1
+- fi
+-
+- if [ x"$dst" = x ]
+- then
+- echo "install: no destination specified"
+- exit 1
+- else
+- true
+- fi
++if test -z "$dir_arg"; then
++ trap '(exit $?); exit' 1 2 13 15
+
+-# If destination is a directory, append the input filename; if your system
+-# does not like double slashes in filenames, you may need to add some logic
++ # Set umask so as not to create temps with too-generous modes.
++ # However, 'strip' requires both read and write access to temps.
++ case $mode in
++ # Optimize common cases.
++ *644) cp_umask=133;;
++ *755) cp_umask=22;;
+
+- if [ -d $dst ]
+- then
+- dst="$dst"/`basename $src`
+- else
+- true
+- fi
++ *[0-7])
++ if test -z "$stripcmd"; then
++ u_plus_rw=
++ else
++ u_plus_rw='% 200'
++ fi
++ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
++ *)
++ if test -z "$stripcmd"; then
++ u_plus_rw=
++ else
++ u_plus_rw=,u+rw
++ fi
++ cp_umask=$mode$u_plus_rw;;
++ esac
+ fi
+
+-## this sed command emulates the dirname command
+-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
++for src
++do
++ # Protect names starting with `-'.
++ case $src in
++ -*) src=./$src;;
++ esac
+
+-# Make sure that the destination directory exists.
+-# this part is taken from Noah Friedman's mkinstalldirs script
++ if test -n "$dir_arg"; then
++ dst=$src
++ dstdir=$dst
++ test -d "$dstdir"
++ dstdir_status=$?
++ else
+
+-# Skip lots of stat calls in the usual case.
+-if [ ! -d "$dstdir" ]; then
+-defaultIFS='
+-'
+-IFS="${IFS-${defaultIFS}}"
++ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
++ # might cause directories to be created, which would be especially bad
++ # if $src (and thus $dsttmp) contains '*'.
++ if test ! -f "$src" && test ! -d "$src"; then
++ echo "$0: $src does not exist." >&2
++ exit 1
++ fi
+
+-oIFS="${IFS}"
+-# Some sh's can't handle IFS=/ for some reason.
+-IFS='%'
+-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+-IFS="${oIFS}"
++ if test -z "$dst_arg"; then
++ echo "$0: no destination specified." >&2
++ exit 1
++ fi
+
+-pathcomp=''
++ dst=$dst_arg
++ # Protect names starting with `-'.
++ case $dst in
++ -*) dst=./$dst;;
++ esac
+
+-while [ $# -ne 0 ] ; do
+- pathcomp="${pathcomp}${1}"
+- shift
++ # If destination is a directory, append the input filename; won't work
++ # if double slashes aren't ignored.
++ if test -d "$dst"; then
++ if test -n "$no_target_directory"; then
++ echo "$0: $dst_arg: Is a directory" >&2
++ exit 1
++ fi
++ dstdir=$dst
++ dst=$dstdir/`basename "$src"`
++ dstdir_status=0
++ else
++ # Prefer dirname, but fall back on a substitute if dirname fails.
++ dstdir=`
++ (dirname "$dst") 2>/dev/null ||
++ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$dst" : 'X\(//\)[^/]' \| \
++ X"$dst" : 'X\(//\)$' \| \
++ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
++ echo X"$dst" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'
++ `
+
+- if [ ! -d "${pathcomp}" ] ;
+- then
+- $mkdirprog "${pathcomp}"
++ test -d "$dstdir"
++ dstdir_status=$?
++ fi
++ fi
++
++ obsolete_mkdir_used=false
++
++ if test $dstdir_status != 0; then
++ case $posix_mkdir in
++ '')
++ # Create intermediate dirs using mode 755 as modified by the umask.
++ # This is like FreeBSD 'install' as of 1997-10-28.
++ umask=`umask`
++ case $stripcmd.$umask in
++ # Optimize common cases.
++ *[2367][2367]) mkdir_umask=$umask;;
++ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
++
++ *[0-7])
++ mkdir_umask=`expr $umask + 22 \
++ - $umask % 100 % 40 + $umask % 20 \
++ - $umask % 10 % 4 + $umask % 2
++ `;;
++ *) mkdir_umask=$umask,go-w;;
++ esac
++
++ # With -d, create the new directory with the user-specified mode.
++ # Otherwise, rely on $mkdir_umask.
++ if test -n "$dir_arg"; then
++ mkdir_mode=-m$mode
+ else
+- true
++ mkdir_mode=
+ fi
+
+- pathcomp="${pathcomp}/"
+-done
+-fi
++ posix_mkdir=false
++ case $umask in
++ *[123567][0-7][0-7])
++ # POSIX mkdir -p sets u+wx bits regardless of umask, which
++ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
++ ;;
++ *)
++ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
++ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+-if [ x"$dir_arg" != x ]
+-then
+- $doit $instcmd $dst &&
++ if (umask $mkdir_umask &&
++ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
++ then
++ if test -z "$dir_arg" || {
++ # Check for POSIX incompatibilities with -m.
++ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
++ # other-writeable bit of parent directory when it shouldn't.
++ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
++ ls_ld_tmpdir=`ls -ld "$tmpdir"`
++ case $ls_ld_tmpdir in
++ d????-?r-*) different_mode=700;;
++ d????-?--*) different_mode=755;;
++ *) false;;
++ esac &&
++ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
++ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
++ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
++ }
++ }
++ then posix_mkdir=:
++ fi
++ rmdir "$tmpdir/d" "$tmpdir"
++ else
++ # Remove any dirs left behind by ancient mkdir implementations.
++ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
++ fi
++ trap '' 0;;
++ esac;;
++ esac
+
+- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+-else
++ if
++ $posix_mkdir && (
++ umask $mkdir_umask &&
++ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
++ )
++ then :
++ else
+
+-# If we're going to rename the final executable, determine the name now.
++ # The umask is ridiculous, or mkdir does not conform to POSIX,
++ # or it failed possibly due to a race condition. Create the
++ # directory the slow way, step by step, checking for races as we go.
+
+- if [ x"$transformarg" = x ]
+- then
+- dstfile=`basename $dst`
+- else
+- dstfile=`basename $dst $transformbasename |
+- sed $transformarg`$transformbasename
+- fi
++ case $dstdir in
++ /*) prefix='/';;
++ -*) prefix='./';;
++ *) prefix='';;
++ esac
+
+-# don't allow the sed command to completely eliminate the filename
++ eval "$initialize_posix_glob"
+
+- if [ x"$dstfile" = x ]
+- then
+- dstfile=`basename $dst`
++ oIFS=$IFS
++ IFS=/
++ $posix_glob set -f
++ set fnord $dstdir
++ shift
++ $posix_glob set +f
++ IFS=$oIFS
++
++ prefixes=
++
++ for d
++ do
++ test -z "$d" && continue
++
++ prefix=$prefix$d
++ if test -d "$prefix"; then
++ prefixes=
+ else
+- true
++ if $posix_mkdir; then
++ (umask=$mkdir_umask &&
++ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
++ # Don't fail if two instances are running concurrently.
++ test -d "$prefix" || exit 1
++ else
++ case $prefix in
++ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
++ *) qprefix=$prefix;;
++ esac
++ prefixes="$prefixes '$qprefix'"
++ fi
+ fi
++ prefix=$prefix/
++ done
+
+-# Make a temp file name in the proper directory.
++ if test -n "$prefixes"; then
++ # Don't fail if two instances are running concurrently.
++ (umask $mkdir_umask &&
++ eval "\$doit_exec \$mkdirprog $prefixes") ||
++ test -d "$dstdir" || exit 1
++ obsolete_mkdir_used=true
++ fi
++ fi
++ fi
+
+- dsttmp=$dstdir/#inst.$$#
++ if test -n "$dir_arg"; then
++ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
++ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
++ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
++ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
++ else
+
+-# Move or copy the file name to the temp name
++ # Make a couple of temp file names in the proper directory.
++ dsttmp=$dstdir/_inst.$$_
++ rmtmp=$dstdir/_rm.$$_
+
+- $doit $instcmd $src $dsttmp &&
++ # Trap to clean up those temp files at exit.
++ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+- trap "rm -f ${dsttmp}" 0 &&
++ # Copy the file name to the temp name.
++ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+-# and set any options; do chmod last to preserve setuid bits
++ # and set any options; do chmod last to preserve setuid bits.
++ #
++ # If any of these fail, we abort the whole thing. If we want to
++ # ignore errors from any of these, just make sure not to ignore
++ # errors from the above "$doit $cpprog $src $dsttmp" command.
++ #
++ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
++ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
++ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
++ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+-# If any of these fail, we abort the whole thing. If we want to
+-# ignore errors from any of these, just make sure not to ignore
+-# errors from the above "$doit $instcmd $src $dsttmp" command.
++ # If -C, don't bother to copy if it wouldn't change the file.
++ if $copy_on_change &&
++ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
++ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
++ eval "$initialize_posix_glob" &&
++ $posix_glob set -f &&
++ set X $old && old=:$2:$4:$5:$6 &&
++ set X $new && new=:$2:$4:$5:$6 &&
++ $posix_glob set +f &&
+
+-# Now rename the file to the real destination.
++ test "$old" = "$new" &&
++ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
++ then
++ rm -f "$dsttmp"
++ else
++ # Rename the file to the real destination.
++ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+- $doit $rmcmd -f $dstdir/$dstfile &&
+- $doit $mvcmd $dsttmp $dstdir/$dstfile
++ # The rename failed, perhaps because mv can't rename something else
++ # to itself, or perhaps because mv is so ancient that it does not
++ # support -f.
++ {
++ # Now remove or move aside any old file at destination location.
++ # We try this two ways since rm can't unlink itself on some
++ # systems and the destination file might be busy for other
++ # reasons. In this case, the final cleanup might fail but the new
++ # file should still install successfully.
++ {
++ test ! -f "$dst" ||
++ $doit $rmcmd -f "$dst" 2>/dev/null ||
++ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
++ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
++ } ||
++ { echo "$0: cannot unlink or rename $dst" >&2
++ (exit 1); exit 1
++ }
++ } &&
+
+-fi &&
++ # Now rename the file to the real destination.
++ $doit $mvcmd "$dsttmp" "$dst"
++ }
++ fi || exit 1
+
++ trap '' 0
++ fi
++done
+
+-exit 0
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+diff -urNad ecosconfig-imx~/acsupport/missing ecosconfig-imx/acsupport/missing
+--- ecosconfig-imx~/acsupport/missing 2009-03-16 13:17:55.000000000 -0400
++++ ecosconfig-imx/acsupport/missing 2009-03-16 13:31:51.222306175 -0400
+@@ -1,7 +1,11 @@
+ #! /bin/sh
+ # Common stub for a few missing GNU programs while installing.
+-# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+-# Franc,ois Pinard , 1996.
++
++scriptversion=2006-05-10.23
++
++# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
++# Free Software Foundation, Inc.
++# Originally by Fran,cois Pinard , 1996.
+
+ # This program is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+@@ -15,15 +19,49 @@
+
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
++# 02110-1301, USA.
++
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
+
+ if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ fi
+
+-case "$1" in
++run=:
++sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
++sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
++
++# In the cases where this matters, `missing' is being run in the
++# srcdir already.
++if test -f configure.ac; then
++ configure_ac=configure.ac
++else
++ configure_ac=configure.in
++fi
++
++msg="missing on your system"
++
++case $1 in
++--run)
++ # Try to run requested program, and just exit if it succeeds.
++ run=
++ shift
++ "$@" && exit 0
++ # Exit code 63 means version mismatch. This often happens
++ # when the user try to use an ancient version of a tool on
++ # a file that requires a minimum version. In this case we
++ # we should proceed has if the program had been absent, or
++ # if --run hadn't been passed.
++ if test $? = 63; then
++ run=:
++ msg="probably too old"
++ fi
++ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+@@ -35,21 +73,29 @@
+ Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
++ --run try to run the given command, and emulate it if it fails
+
+ Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
++ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
++ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+- yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
++ tar try tar, gnutar, gtar, then tar without non-portable flags
++ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
++
++Send bug reports to ."
++ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+- echo "missing - GNU libit 0.0"
++ echo "missing $scriptversion (GNU Automake)"
++ exit $?
+ ;;
+
+ -*)
+@@ -58,10 +104,45 @@
+ exit 1
+ ;;
+
+- aclocal)
++esac
++
++# Now exit if we have it, but it failed. Also exit now if we
++# don't have it and --version was passed (most likely to detect
++# the program).
++case $1 in
++ lex|yacc)
++ # Not GNU programs, they don't have --version.
++ ;;
++
++ tar)
++ if test -n "$run"; then
++ echo 1>&2 "ERROR: \`tar' requires --run"
++ exit 1
++ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
++ exit 1
++ fi
++ ;;
++
++ *)
++ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
++ # We have it, but it failed.
++ exit 1
++ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
++ # Could not run --version or --help. This is probably someone
++ # running `$TOOL --version' or `$TOOL --help' to check whether
++ # $TOOL exists and not knowing $TOOL uses missing.
++ exit 1
++ fi
++ ;;
++esac
++
++# If it does not exist, or fails to run (possibly an outdated version),
++# try to emulate it.
++case $1 in
++ aclocal*)
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
+- you modified \`acinclude.m4' or \`configure.in'. You might want
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+@@ -69,8 +150,8 @@
+
+ autoconf)
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
+- you modified \`configure.in'. You might want to install the
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+@@ -78,107 +159,198 @@
+
+ autoheader)
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
+- you modified \`acconfig.h' or \`configure.in'. You might want
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER([^):]*:\([^)]*\)).*/\1/p' configure.in`
+- if test -z "$files"; then
+- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^):]*\)).*/\1/p' configure.in`
+- test -z "$files" || files="$files.in"
+- else
+- files=`echo "$files" | sed -e 's/:/ /g'`
+- fi
+- test -z "$files" && files="config.h.in"
+- touch $files
++ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
++ test -z "$files" && files="config.h"
++ touch_files=
++ for f in $files; do
++ case $f in
++ *:*) touch_files="$touch_files "`echo "$f" |
++ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
++ *) touch_files="$touch_files $f.in";;
++ esac
++ done
++ touch $touch_files
+ ;;
+
+- automake)
++ automake*)
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
+- you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+- find . -type f -name Makefile.am -print \
+- | sed 's/^\(.*\).am$/touch \1.in/' \
+- | sh
++ find . -type f -name Makefile.am -print |
++ sed 's/\.am$/.in/' |
++ while read f; do touch "$f"; done
++ ;;
++
++ autom4te)
++ echo 1>&2 "\
++WARNING: \`$1' is needed, but is $msg.
++ You might have modified some files without having the
++ proper tools for further handling them.
++ You can get \`$1' as part of \`Autoconf' from any GNU
++ archive site."
++
++ file=`echo "$*" | sed -n "$sed_output"`
++ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++ if test -f "$file"; then
++ touch $file
++ else
++ test -z "$file" || exec >$file
++ echo "#! /bin/sh"
++ echo "# Created by GNU Automake missing as a replacement of"
++ echo "# $ $@"
++ echo "exit 0"
++ chmod +x $file
++ exit 1
++ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+- if [ $# -ne 1 ]; then
++ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+- case "$LASTARG" in
++ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+- if [ -f "$SRCFILE" ]; then
++ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+- if [ -f "$SRCFILE" ]; then
++ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+- if [ ! -f y.tab.h ]; then
++ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+- if [ ! -f y.tab.c ]; then
++ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+- if [ $# -ne 1 ]; then
++ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+- case "$LASTARG" in
++ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+- if [ -f "$SRCFILE" ]; then
++ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+- if [ ! -f lex.yy.c ]; then
++ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
++ help2man)
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified a dependency of a manual page. You may need the
++ \`Help2man' package in order for those modifications to take
++ effect. You can get \`Help2man' from any GNU archive site."
++
++ file=`echo "$*" | sed -n "$sed_output"`
++ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++ if test -f "$file"; then
++ touch $file
++ else
++ test -z "$file" || exec >$file
++ echo ".ab help2man is required to generate this page"
++ exit 1
++ fi
++ ;;
++
+ makeinfo)
+ echo 1>&2 "\
+-WARNING: \`$1' is missing on your system. You should only need it if
++WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
++ # The file to touch is that specified with -o ...
++ file=`echo "$*" | sed -n "$sed_output"`
++ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
++ # ... or it is the one specified with @setfilename ...
++ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
++ file=`sed -n '
++ /^@setfilename/{
++ s/.* \([^ ]*\) *$/\1/
++ p
++ q
++ }' $infile`
++ # ... or it is derived from the source name (dir/f.texi becomes f.info)
++ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
++ # If the file does not exist, the user really needs makeinfo;
++ # let's fail without touching anything.
++ test -f $file || exit 1
+ touch $file
+ ;;
+
++ tar)
++ shift
++
++ # We have already tried tar in the generic part.
++ # Look for gnutar/gtar before invocation to avoid ugly error
++ # messages.
++ if (gnutar --version > /dev/null 2>&1); then
++ gnutar "$@" && exit 0
++ fi
++ if (gtar --version > /dev/null 2>&1); then
++ gtar "$@" && exit 0
++ fi
++ firstarg="$1"
++ if shift; then
++ case $firstarg in
++ *o*)
++ firstarg=`echo "$firstarg" | sed s/o//`
++ tar "$firstarg" "$@" && exit 0
++ ;;
++ esac
++ case $firstarg in
++ *h*)
++ firstarg=`echo "$firstarg" | sed s/h//`
++ tar "$firstarg" "$@" && exit 0
++ ;;
++ esac
++ fi
++
++ echo 1>&2 "\
++WARNING: I can't seem to be able to run \`tar' with the given arguments.
++ You may want to install GNU tar or Free paxutils, or check the
++ command line arguments."
++ exit 1
++ ;;
++
+ *)
+ echo 1>&2 "\
+-WARNING: \`$1' is needed, and you do not seem to have it handy on your
+- system. You might have modified some files without having the
++WARNING: \`$1' is needed, and is $msg.
++ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+- it often tells you about the needed prerequirements for installing
++ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+@@ -186,3 +358,10 @@
+ esac
+
+ exit 0
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+diff -urNad ecosconfig-imx~/acsupport/mkinstalldirs ecosconfig-imx/acsupport/mkinstalldirs
+--- ecosconfig-imx~/acsupport/mkinstalldirs 2009-03-16 13:17:55.000000000 -0400
++++ ecosconfig-imx/acsupport/mkinstalldirs 2009-03-16 13:31:51.258305720 -0400
+@@ -1,36 +1,161 @@
+ #! /bin/sh
+ # mkinstalldirs --- make directory hierarchy
+-# Author: Noah Friedman
++
++scriptversion=2006-05-11.19
++
++# Original author: Noah Friedman
+ # Created: 1993-05-16
+-# Last modified: 1994-03-25
+-# Public domain
++# Public domain.
++#
++# This file is maintained in Automake, please report
++# bugs to or send patches to
++# .
+
++nl='
++'
++IFS=" "" $nl"
+ errstatus=0
++dirmode=
+
+-for file in ${1+"$@"} ; do
+- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+- shift
++usage="\
++Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+- pathcomp=
+- for d in ${1+"$@"} ; do
+- pathcomp="$pathcomp$d"
+- case "$pathcomp" in
+- -* ) pathcomp=./$pathcomp ;;
+- esac
++Create each directory DIR (with mode MODE, if specified), including all
++leading file name components.
+
+- if test ! -d "$pathcomp"; then
+- echo "mkdir $pathcomp" 1>&2
+- mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
+- fi
++Report bugs to ."
+
+- if test ! -d "$pathcomp"; then
++# process command line arguments
++while test $# -gt 0 ; do
++ case $1 in
++ -h | --help | --h*) # -h for help
++ echo "$usage"
++ exit $?
++ ;;
++ -m) # -m PERM arg
++ shift
++ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
++ dirmode=$1
++ shift
++ ;;
++ --version)
++ echo "$0 $scriptversion"
++ exit $?
++ ;;
++ --) # stop option processing
++ shift
++ break
++ ;;
++ -*) # unknown option
++ echo "$usage" 1>&2
++ exit 1
++ ;;
++ *) # first non-opt arg
++ break
++ ;;
++ esac
++done
++
++for file
++do
++ if test -d "$file"; then
++ shift
++ else
++ break
++ fi
++done
++
++case $# in
++ 0) exit 0 ;;
++esac
++
++# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
++# mkdir -p a/c at the same time, both will detect that a is missing,
++# one will create a, then the other will try to create a and die with
++# a "File exists" error. This is a problem when calling mkinstalldirs
++# from a parallel make. We use --version in the probe to restrict
++# ourselves to GNU mkdir, which is thread-safe.
++case $dirmode in
++ '')
++ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
++ echo "mkdir -p -- $*"
++ exec mkdir -p -- "$@"
++ else
++ # On NextStep and OpenStep, the `mkdir' command does not
++ # recognize any option. It will interpret all options as
++ # directories to create, and then abort because `.' already
++ # exists.
++ test -d ./-p && rmdir ./-p
++ test -d ./--version && rmdir ./--version
++ fi
++ ;;
++ *)
++ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
++ test ! -d ./--version; then
++ echo "mkdir -m $dirmode -p -- $*"
++ exec mkdir -m "$dirmode" -p -- "$@"
++ else
++ # Clean up after NextStep and OpenStep mkdir.
++ for d in ./-m ./-p ./--version "./$dirmode";
++ do
++ test -d $d && rmdir $d
++ done
++ fi
++ ;;
++esac
++
++for file
++do
++ case $file in
++ /*) pathcomp=/ ;;
++ *) pathcomp= ;;
++ esac
++ oIFS=$IFS
++ IFS=/
++ set fnord $file
++ shift
++ IFS=$oIFS
++
++ for d
++ do
++ test "x$d" = x && continue
++
++ pathcomp=$pathcomp$d
++ case $pathcomp in
++ -*) pathcomp=./$pathcomp ;;
++ esac
++
++ if test ! -d "$pathcomp"; then
++ echo "mkdir $pathcomp"
++
++ mkdir "$pathcomp" || lasterr=$?
++
++ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+- fi
++ else
++ if test ! -z "$dirmode"; then
++ echo "chmod $dirmode $pathcomp"
++ lasterr=
++ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+- pathcomp="$pathcomp/"
+- done
++ if test ! -z "$lasterr"; then
++ errstatus=$lasterr
++ fi
++ fi
++ fi
++ fi
++
++ pathcomp=$pathcomp/
++ done
+ done
+
+ exit $errstatus
+
+-# mkinstalldirs ends here
++# Local Variables:
++# mode: shell-script
++# sh-indentation: 2
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+diff -urNad ecosconfig-imx~/src/Makefile.in ecosconfig-imx/src/Makefile.in
+--- ecosconfig-imx~/src/Makefile.in 2009-03-16 13:17:55.000000000 -0400
++++ ecosconfig-imx/src/Makefile.in 2009-03-16 13:31:51.338304637 -0400
+@@ -1,6 +1,8 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated by automake 1.10.2 from Makefile.am.
++# @configure_input@
+
+-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
++# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -10,112 +12,196 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
++@SET_MAKE@
++
+ #######ECOSHOSTGPLCOPYRIGHTBEGIN####
+ #######ECOSHOSTGPLCOPYRIGHTEND####
+ #######DESCRIPTIONBEGIN####
+ ######DESCRIPTIONEND####
+-
+-
+-SHELL = @SHELL@
+-
+-srcdir = @srcdir@
+-top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+-prefix = @prefix@
+-exec_prefix = @exec_prefix@
+-
+-bindir = @bindir@
+-sbindir = @sbindir@
+-libexecdir = @libexecdir@
+-datadir = @datadir@
+-sysconfdir = @sysconfdir@
+-sharedstatedir = @sharedstatedir@
+-localstatedir = @localstatedir@
+-libdir = @libdir@
+-infodir = @infodir@
+-mandir = @mandir@
+-includedir = @includedir@
+-oldincludedir = /usr/include
+-
+-DESTDIR =
+-
+ pkgdatadir = $(datadir)/@PACKAGE@
+ pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+-
+-top_builddir = .
+-
+-ACLOCAL = @ACLOCAL@
+-AUTOCONF = @AUTOCONF@
+-AUTOMAKE = @AUTOMAKE@
+-AUTOHEADER = @AUTOHEADER@
+-
+-INSTALL = @INSTALL@
+-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+-INSTALL_DATA = @INSTALL_DATA@
+-INSTALL_SCRIPT = @INSTALL_SCRIPT@
+-transform = @program_transform_name@
+-
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
+-host_alias = @host_alias@
++build_triplet = @build@
+ host_triplet = @host@
+-CC = @CC@
+-CXX = @CXX@
+-ECOS_REPOSITORY = @ECOS_REPOSITORY@
++subdir = .
++DIST_COMMON = $(am__configure_deps) \
++ $(srcdir)/../acsupport/config.guess \
++ $(srcdir)/../acsupport/config.sub \
++ $(srcdir)/../acsupport/install-sh \
++ $(srcdir)/../acsupport/missing \
++ $(srcdir)/../acsupport/mkinstalldirs $(srcdir)/Makefile.am \
++ $(srcdir)/Makefile.in $(top_srcdir)/configure \
++ ../acsupport/ChangeLog ../acsupport/config.guess \
++ ../acsupport/config.sub ../acsupport/install-sh \
++ ../acsupport/ltmain.sh ../acsupport/missing \
++ ../acsupport/mkinstalldirs ChangeLog
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
++ $(top_srcdir)/../acsupport/acinclude.m4 \
++ $(top_srcdir)/configure.in
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++ $(ACLOCAL_M4)
++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
++ configure.lineno config.status.lineno
++mkinstalldirs = $(SHELL) $(top_srcdir)/../acsupport/mkinstalldirs
++CONFIG_CLEAN_FILES =
++SOURCES =
++DIST_SOURCES =
++RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
++ html-recursive info-recursive install-data-recursive \
++ install-dvi-recursive install-exec-recursive \
++ install-html-recursive install-info-recursive \
++ install-pdf-recursive install-ps-recursive install-recursive \
++ installcheck-recursive installdirs-recursive pdf-recursive \
++ ps-recursive uninstall-recursive
++RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
++ distclean-recursive maintainer-clean-recursive
++ETAGS = etags
++CTAGS = ctags
++DIST_SUBDIRS = $(SUBDIRS)
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++distdir = $(PACKAGE)-$(VERSION)
++top_distdir = $(distdir)
++am__remove_distdir = \
++ { test ! -d $(distdir) \
++ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
++ && rm -fr $(distdir); }; }
++DIST_ARCHIVES = $(distdir).tar.gz
++GZIP_ENV = --best
++distuninstallcheck_listfiles = find . -type f -print
++distcleancheck_listfiles = find . -type f -print
++ACLOCAL = @ACLOCAL@
++AMTAR = @AMTAR@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
++CYGPATH_W = @CYGPATH_W@
++DEFS = @DEFS@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++INSTALL = @INSTALL@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
++LIBOBJS = @LIBOBJS@
++LIBS = @LIBS@
++LTLIBOBJS = @LTLIBOBJS@
+ MAINT = @MAINT@
+ MAKEINFO = @MAKEINFO@
+-MSVC_SRCDIR = @MSVC_SRCDIR@
++MKDIR_P = @MKDIR_P@
+ PACKAGE = @PACKAGE@
+-PACKAGE_DIR = @PACKAGE_DIR@
+-PACKAGE_INSTALL = @PACKAGE_INSTALL@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
++PATH_SEPARATOR = @PATH_SEPARATOR@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
++SUBDIRS = @SUBDIRS@
+ VERSION = @VERSION@
+-ecos_CFLAGS = @ecos_CFLAGS@
+-ecos_CXXFLAGS = @ecos_CXXFLAGS@
+-ecos_INCLUDES = @ecos_INCLUDES@
+-ecos_LDADD = @ecos_LDADD@
+-ecos_LIBS = @ecos_LIBS@
+-ecos_infra_incdir = @ecos_infra_incdir@
+-ecos_infra_libdir = @ecos_infra_libdir@
+-ecos_libcdl_incdir = @ecos_libcdl_incdir@
+-ecos_libcdl_libdir = @ecos_libcdl_libdir@
+-ecos_tk_includes = @ecos_tk_includes@
+-ecos_tk_libs = @ecos_tk_libs@
+-
++abs_builddir = @abs_builddir@
++abs_srcdir = @abs_srcdir@
++abs_top_builddir = @abs_top_builddir@
++abs_top_srcdir = @abs_top_srcdir@
++am__leading_dot = @am__leading_dot@
++am__tar = @am__tar@
++am__untar = @am__untar@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++builddir = @builddir@
++datadir = @datadir@
++datarootdir = @datarootdir@
++docdir = @docdir@
++dvidir = @dvidir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++htmldir = @htmldir@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
++localedir = @localedir@
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++pdfdir = @pdfdir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++psdir = @psdir@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++srcdir = @srcdir@
++subdirs = @subdirs@
++sysconfdir = @sysconfdir@
++target_alias = @target_alias@
++top_build_prefix = @top_build_prefix@
++top_builddir = @top_builddir@
++top_srcdir = @top_srcdir@
+ AUTOMAKE_OPTIONS = 1.3 foreign
+-SUBDIRS = @SUBDIRS@
+-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+-mkinstalldirs = $(SHELL) $(top_srcdir)/../acsupport/mkinstalldirs
+-CONFIG_CLEAN_FILES =
+-DIST_COMMON = ChangeLog Makefile.am Makefile.in acinclude.m4 aclocal.m4 \
+-configure configure.in
+-
+-
+-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
++all: all-recursive
+
+-TAR = gtar
+-GZIP_ENV = --best
+-all: all-redirect
+ .SUFFIXES:
+-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
+-
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+- cd $(top_builddir) \
+- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+-
+-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4
+- cd $(srcdir) && $(ACLOCAL)
++am--refresh:
++ @:
++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
++ @for dep in $?; do \
++ case '$(am__configure_deps)' in \
++ *$$dep*) \
++ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
++ cd $(srcdir) && $(AUTOMAKE) --foreign \
++ && exit 0; \
++ exit 1;; \
++ esac; \
++ done; \
++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
++ cd $(top_srcdir) && \
++ $(AUTOMAKE) --foreign Makefile
++.PRECIOUS: Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ @case '$?' in \
++ *config.status*) \
++ echo ' $(SHELL) ./config.status'; \
++ $(SHELL) ./config.status;; \
++ *) \
++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
++ esac;
+
+-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
++
++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+ # This directory's subdirectories are mostly independent; you can cd
+ # into them and run `make' without going through this Makefile.
+@@ -123,13 +209,14 @@
+ # (1) if the variable is set in `config.status', edit `config.status'
+ # (which will cause the Makefiles to be regenerated when you run `make');
+ # (2) otherwise, pass the desired values on the `make' command line.
+-
+-@SET_MAKE@
+-
+-all-recursive install-data-recursive install-exec-recursive \
+-installdirs-recursive install-recursive uninstall-recursive \
+-check-recursive installcheck-recursive info-recursive dvi-recursive:
+- @set fnord $(MAKEFLAGS); amf=$$2; \
++$(RECURSIVE_TARGETS):
++ @failcom='exit 1'; \
++ for f in x $$MAKEFLAGS; do \
++ case $$f in \
++ *=* | --[!k]*);; \
++ *k*) failcom='fail=yes';; \
++ esac; \
++ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+@@ -141,21 +228,31 @@
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
++ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+-mostlyclean-recursive clean-recursive distclean-recursive \
+-maintainer-clean-recursive:
+- @set fnord $(MAKEFLAGS); amf=$$2; \
++$(RECURSIVE_CLEAN_TARGETS):
++ @failcom='exit 1'; \
++ for f in x $$MAKEFLAGS; do \
++ case $$f in \
++ *=* | --[!k]*);; \
++ *k*) failcom='fail=yes';; \
++ esac; \
++ done; \
+ dot_seen=no; \
+- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+- rev="$$subdir $$rev"; \
+- test "$$subdir" != "." || dot_seen=yes; \
++ case "$@" in \
++ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
++ *) list='$(SUBDIRS)' ;; \
++ esac; \
++ rev=''; for subdir in $$list; do \
++ if test "$$subdir" = "."; then :; else \
++ rev="$$subdir $$rev"; \
++ fi; \
+ done; \
+- test "$$dot_seen" = "no" && rev=". $$rev"; \
++ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+@@ -165,180 +262,328 @@
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
++ || eval $$failcom; \
+ done && test -z "$$fail"
+ tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
++ctags-recursive:
++ list='$(SUBDIRS)'; for subdir in $$list; do \
++ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
++ done
+
++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in files) print i; }; }'`; \
++ mkid -fID $$unique
+ tags: TAGS
+
+-ID: $(HEADERS) $(SOURCES) $(LISP)
+- list='$(SOURCES) $(HEADERS)'; \
+- unique=`for i in $$list; do echo $$i; done | \
+- awk ' { files[$$0] = 1; } \
+- END { for (i in files) print i; }'`; \
+- here=`pwd` && cd $(srcdir) \
+- && mkid -f$$here/ID $$unique $(LISP)
+-
+-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
++TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
++ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
++ include_option=--etags-include; \
++ empty_fix=.; \
++ else \
++ include_option=--include; \
++ empty_fix=; \
++ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+- if test "$$subdir" = .; then :; else \
+- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+- fi; \
++ if test "$$subdir" = .; then :; else \
++ test ! -f $$subdir/TAGS || \
++ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
++ fi; \
+ done; \
+- list='$(SOURCES) $(HEADERS)'; \
+- unique=`for i in $$list; do echo $$i; done | \
+- awk ' { files[$$0] = 1; } \
+- END { for (i in files) print i; }'`; \
+- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+-
+-mostlyclean-tags:
++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in files) print i; }; }'`; \
++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
++ test -n "$$unique" || unique=$$empty_fix; \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ $$tags $$unique; \
++ fi
++ctags: CTAGS
++CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
++ $(TAGS_FILES) $(LISP)
++ tags=; \
++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in files) print i; }; }'`; \
++ test -z "$(CTAGS_ARGS)$$tags$$unique" \
++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
++ $$tags $$unique
+
+-clean-tags:
++GTAGS:
++ here=`$(am__cd) $(top_builddir) && pwd` \
++ && cd $(top_srcdir) \
++ && gtags -i $(GTAGS_ARGS) $$here
+
+ distclean-tags:
+- -rm -f TAGS ID
+-
+-maintainer-clean-tags:
+-
+-distdir = $(PACKAGE)-$(VERSION)
+-top_distdir = $(distdir)
++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+-# This target untars the dist file and tries a VPATH configuration. Then
+-# it guarantees that the distribution is self-contained by making another
+-# tarfile.
+-distcheck: dist
+- -rm -rf $(distdir)
+- GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+- mkdir $(distdir)/=build
+- mkdir $(distdir)/=inst
+- dc_install_base=`cd $(distdir)/=inst && pwd`; \
+- cd $(distdir)/=build \
+- && ../configure --srcdir=.. --prefix=$$dc_install_base \
+- && $(MAKE) $(AM_MAKEFLAGS) \
+- && $(MAKE) $(AM_MAKEFLAGS) dvi \
+- && $(MAKE) $(AM_MAKEFLAGS) check \
+- && $(MAKE) $(AM_MAKEFLAGS) install \
+- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+- && $(MAKE) $(AM_MAKEFLAGS) dist
+- -rm -rf $(distdir)
+- @banner="$(distdir).tar.gz is ready for distribution"; \
+- dashes=`echo "$$banner" | sed s/./=/g`; \
+- echo "$$dashes"; \
+- echo "$$banner"; \
+- echo "$$dashes"
+-dist: distdir
+- -chmod -R a+r $(distdir)
+- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+- -rm -rf $(distdir)
+-dist-all: distdir
+- -chmod -R a+r $(distdir)
+- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+- -rm -rf $(distdir)
+ distdir: $(DISTFILES)
+- -rm -rf $(distdir)
+- mkdir $(distdir)
+- -chmod 777 $(distdir)
+- here=`cd $(top_builddir) && pwd`; \
+- top_distdir=`cd $(distdir) && pwd`; \
+- distdir=`cd $(distdir) && pwd`; \
+- cd $(top_srcdir) \
+- && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
+- @for file in $(DISTFILES); do \
+- d=$(srcdir); \
++ $(am__remove_distdir)
++ test -d $(distdir) || mkdir $(distdir)
++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ list='$(DISTFILES)'; \
++ dist_files=`for file in $$list; do echo $$file; done | \
++ sed -e "s|^$$srcdirstrip/||;t" \
++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
++ case $$dist_files in \
++ */*) $(MKDIR_P) `echo "$$dist_files" | \
++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
++ sort -u` ;; \
++ esac; \
++ for file in $$dist_files; do \
++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+- cp -pr $$d/$$file $(distdir)/$$file; \
++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
++ fi; \
++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+- || cp -p $$d/$$file $(distdir)/$$file || :; \
++ || cp -p $$d/$$file $(distdir)/$$file \
++ || exit 1; \
+ fi; \
+ done
+- for subdir in $(SUBDIRS); do \
++ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+- test -d $(distdir)/$$subdir \
+- || mkdir $(distdir)/$$subdir \
++ test -d "$(distdir)/$$subdir" \
++ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+- chmod 777 $(distdir)/$$subdir; \
+- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
++ distdir=`$(am__cd) $(distdir) && pwd`; \
++ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
++ (cd $$subdir && \
++ $(MAKE) $(AM_MAKEFLAGS) \
++ top_distdir="$$top_distdir" \
++ distdir="$$distdir/$$subdir" \
++ am__remove_distdir=: \
++ am__skip_length_check=: \
++ distdir) \
+ || exit 1; \
+ fi; \
+ done
+-info-am:
+-info: info-recursive
+-dvi-am:
+-dvi: dvi-recursive
++ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
++ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
++ || chmod -R a+r $(distdir)
++dist-gzip: distdir
++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
++
++dist-bzip2: distdir
++ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
++ $(am__remove_distdir)
++
++dist-lzma: distdir
++ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
++ $(am__remove_distdir)
++
++dist-tarZ: distdir
++ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
++ $(am__remove_distdir)
++
++dist-shar: distdir
++ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
++ $(am__remove_distdir)
++
++dist-zip: distdir
++ -rm -f $(distdir).zip
++ zip -rq $(distdir).zip $(distdir)
++ $(am__remove_distdir)
++
++dist dist-all: distdir
++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
++
++# This target untars the dist file and tries a VPATH configuration. Then
++# it guarantees that the distribution is self-contained by making another
++# tarfile.
++distcheck: dist
++ case '$(DIST_ARCHIVES)' in \
++ *.tar.gz*) \
++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
++ *.tar.bz2*) \
++ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
++ *.tar.lzma*) \
++ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
++ *.tar.Z*) \
++ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
++ *.shar.gz*) \
++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
++ *.zip*) \
++ unzip $(distdir).zip ;;\
++ esac
++ chmod -R a-w $(distdir); chmod a+w $(distdir)
++ mkdir $(distdir)/_build
++ mkdir $(distdir)/_inst
++ chmod a-w $(distdir)
++ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
++ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
++ && cd $(distdir)/_build \
++ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
++ $(DISTCHECK_CONFIGURE_FLAGS) \
++ && $(MAKE) $(AM_MAKEFLAGS) \
++ && $(MAKE) $(AM_MAKEFLAGS) dvi \
++ && $(MAKE) $(AM_MAKEFLAGS) check \
++ && $(MAKE) $(AM_MAKEFLAGS) install \
++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
++ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
++ distuninstallcheck \
++ && chmod -R a-w "$$dc_install_base" \
++ && ({ \
++ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
++ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
++ } || { rm -rf "$$dc_destdir"; exit 1; }) \
++ && rm -rf "$$dc_destdir" \
++ && $(MAKE) $(AM_MAKEFLAGS) dist \
++ && rm -rf $(DIST_ARCHIVES) \
++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
++ $(am__remove_distdir)
++ @(echo "$(distdir) archives ready for distribution: "; \
++ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
++ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
++distuninstallcheck:
++ @cd $(distuninstallcheck_dir) \
++ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
++ || { echo "ERROR: files left after uninstall:" ; \
++ if test -n "$(DESTDIR)"; then \
++ echo " (check DESTDIR support)"; \
++ fi ; \
++ $(distuninstallcheck_listfiles) ; \
++ exit 1; } >&2
++distcleancheck: distclean
++ @if test '$(srcdir)' = . ; then \
++ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
++ exit 1 ; \
++ fi
++ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
++ || { echo "ERROR: files left in build directory after distclean:" ; \
++ $(distcleancheck_listfiles) ; \
++ exit 1; } >&2
+ check-am: all-am
+ check: check-recursive
+-installcheck-am:
+-installcheck: installcheck-recursive
+-install-exec-am:
++all-am: Makefile
++installdirs: installdirs-recursive
++installdirs-am:
++install: install-recursive
+ install-exec: install-exec-recursive
+-
+-install-data-am:
+ install-data: install-data-recursive
++uninstall: uninstall-recursive
+
+ install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+-install: install-recursive
+-uninstall-am:
+-uninstall: uninstall-recursive
+-all-am: Makefile
+-all-redirect: all-recursive
+-install-strip:
+- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+-installdirs: installdirs-recursive
+-installdirs-am:
+-
+
++installcheck: installcheck-recursive
++install-strip:
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ `test -z '$(STRIP)' || \
++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ mostlyclean-generic:
+
+ clean-generic:
+
+ distclean-generic:
+- -rm -f Makefile $(CONFIG_CLEAN_FILES)
+- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+ maintainer-clean-generic:
+-mostlyclean-am: mostlyclean-tags mostlyclean-generic
++ @echo "This command is intended for maintainers to use"
++ @echo "it deletes files that may require special tools to rebuild."
++clean: clean-recursive
+
+-mostlyclean: mostlyclean-recursive
++clean-am: clean-generic mostlyclean-am
+
+-clean-am: clean-tags clean-generic mostlyclean-am
++distclean: distclean-recursive
++ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
++ -rm -f Makefile
++distclean-am: clean-am distclean-generic distclean-tags
+
+-clean: clean-recursive
++dvi: dvi-recursive
+
+-distclean-am: distclean-tags distclean-generic clean-am
++dvi-am:
+
+-distclean: distclean-recursive
+- -rm -f config.status
++html: html-recursive
+
+-maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
+- @echo "This command is intended for maintainers to use;"
+- @echo "it deletes files that may require special tools to rebuild."
++info: info-recursive
++
++info-am:
++
++install-data-am:
++
++install-dvi: install-dvi-recursive
++
++install-exec-am:
++
++install-html: install-html-recursive
++
++install-info: install-info-recursive
++
++install-man:
++
++install-pdf: install-pdf-recursive
++
++install-ps: install-ps-recursive
++
++installcheck-am:
+
+ maintainer-clean: maintainer-clean-recursive
+- -rm -f config.status
++ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
++ -rm -rf $(top_srcdir)/autom4te.cache
++ -rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
+
+-.PHONY: install-data-recursive uninstall-data-recursive \
+-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+-uninstalldirs-recursive all-recursive check-recursive \
+-installcheck-recursive info-recursive dvi-recursive \
+-mostlyclean-recursive distclean-recursive clean-recursive \
+-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs-am \
+-installdirs mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++mostlyclean: mostlyclean-recursive
++
++mostlyclean-am: mostlyclean-generic
++
++pdf: pdf-recursive
++
++pdf-am:
++
++ps: ps-recursive
+
++ps-am:
++
++uninstall-am:
++
++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
++ install-strip
++
++.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
++ all all-am am--refresh check check-am clean clean-generic \
++ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
++ dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \
++ distclean-generic distclean-tags distcleancheck distdir \
++ distuninstallcheck dvi dvi-am html html-am info info-am \
++ install install-am install-data install-data-am install-dvi \
++ install-dvi-am install-exec install-exec-am install-html \
++ install-html-am install-info install-info-am install-man \
++ install-pdf install-pdf-am install-ps install-ps-am \
++ install-strip installcheck installcheck-am installdirs \
++ installdirs-am maintainer-clean maintainer-clean-generic \
++ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
++ tags-recursive uninstall uninstall-am
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+diff -urNad ecosconfig-imx~/src/aclocal.m4 ecosconfig-imx/src/aclocal.m4
+--- ecosconfig-imx~/src/aclocal.m4 2009-03-16 13:17:55.000000000 -0400
++++ ecosconfig-imx/src/aclocal.m4 2009-03-16 13:31:49.262304622 -0400
+@@ -1,128 +1,465 @@
+-dnl aclocal.m4 generated automatically by aclocal 1.4-p5
++# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
+
+-dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+-dnl This file is free software; the Free Software Foundation
+-dnl gives unlimited permission to copy and/or distribute it,
+-dnl with or without modifications, as long as this notice is preserved.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-dnl This program is distributed in the hope that it will be useful,
+-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+-dnl PARTICULAR PURPOSE.
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
+
+-dnl Process this file with aclocal to get an aclocal.m4 file. Then
+-dnl process that with autoconf.
+-dnl ====================================================================
+-dnl
+-dnl acinclude.m4
+-dnl
+-dnl ====================================================================
+-dnl ####ECOSHOSTGPLCOPYRIGHTBEGIN####
+-dnl ----------------------------------------------------------------------------
+-dnl Copyright (C) 2002 Bart Veer
+-dnl
+-dnl This file is part of the eCos host tools.
+-dnl
+-dnl This program is free software; you can redistribute it and/or modify it
+-dnl under the terms of the GNU General Public License as published by the Free
+-dnl Software Foundation; either version 2 of the License, or (at your option)
+-dnl any later version.
+-dnl
+-dnl This program is distributed in the hope that it will be useful, but WITHOUT
+-dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+-dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+-dnl more details.
+-dnl
+-dnl You should have received a copy of the GNU General Public License along with
+-dnl this program; if not, write to the Free Software Foundation, Inc.,
+-dnl 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-dnl
+-dnl ----------------------------------------------------------------------------
+-dnl ####ECOSHOSTGPLCOPYRIGHTEND####
+-dnl ====================================================================
+-dnl#####DESCRIPTIONBEGIN####
+-dnl
+-dnl Author(s): bartv
+-dnl Contact(s): bartv
+-dnl Date: 2002/08/03
+-dnl Version: 0.01
+-dnl
+-dnl####DESCRIPTIONEND####
+-dnl ====================================================================
++m4_ifndef([AC_AUTOCONF_VERSION],
++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
++[m4_warning([this file was generated for autoconf 2.63.
++You have another version of autoconf. It may work, but is not guaranteed to.
++If you have problems, you may need to regenerate the build system entirely.
++To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+-dnl Access shared macros.
+-dnl AM_CONDITIONAL needs to be mentioned here or else aclocal does not
+-dnl incorporate the macro into aclocal.m4
+-sinclude(../acsupport/acinclude.m4)
++# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# Define a conditional.
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++# (This private macro should not be called outside this file.)
++AC_DEFUN([AM_AUTOMAKE_VERSION],
++[am__api_version='1.10'
++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
++dnl require some minimum version. Point them to the right macro.
++m4_if([$1], [1.10.2], [],
++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
++])
++
++# _AM_AUTOCONF_VERSION(VERSION)
++# -----------------------------
++# aclocal traces this macro to find the Autoconf version.
++# This is a private macro too. Using m4_define simplifies
++# the logic in aclocal, which can simply ignore this definition.
++m4_define([_AM_AUTOCONF_VERSION], [])
++
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
++# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++[AM_AUTOMAKE_VERSION([1.10.2])dnl
++m4_ifndef([AC_AUTOCONF_VERSION],
++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
++
++# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
++# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
++#
++# Of course, Automake must honor this variable whenever it calls a
++# tool from the auxiliary directory. The problem is that $srcdir (and
++# therefore $ac_aux_dir as well) can be either absolute or relative,
++# depending on how configure is run. This is pretty annoying, since
++# it makes $ac_aux_dir quite unusable in subdirectories: in the top
++# source directory, any form will work fine, but in subdirectories a
++# relative path needs to be adjusted first.
++#
++# $ac_aux_dir/missing
++# fails when called from a subdirectory if $ac_aux_dir is relative
++# $top_srcdir/$ac_aux_dir/missing
++# fails if $ac_aux_dir is absolute,
++# fails when called from a subdirectory in a VPATH build with
++# a relative $ac_aux_dir
++#
++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
++# are both prefixed by $srcdir. In an in-source build this is usually
++# harmless because $srcdir is `.', but things will broke when you
++# start a VPATH build or use an absolute $srcdir.
++#
++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
++# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
++# and then we would define $MISSING as
++# MISSING="\${SHELL} $am_aux_dir/missing"
++# This will work as long as MISSING is not called from configure, because
++# unfortunately $(top_srcdir) has no meaning in configure.
++# However there are other variables, like CC, which are often used in
++# configure, and could therefore not use this "fixed" $ac_aux_dir.
++#
++# Another solution, used here, is to always expand $ac_aux_dir to an
++# absolute PATH. The drawback is that using absolute paths prevent a
++# configured tree to be moved without reconfiguration.
++
++AC_DEFUN([AM_AUX_DIR_EXPAND],
++[dnl Rely on autoconf to set up CDPATH properly.
++AC_PREREQ([2.50])dnl
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++])
++
++# AM_CONDITIONAL -*- Autoconf -*-
++
++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 8
++
++# AM_CONDITIONAL(NAME, SHELL-CONDITION)
++# -------------------------------------
++# Define a conditional.
+ AC_DEFUN([AM_CONDITIONAL],
+-[AC_SUBST($1_TRUE)
+-AC_SUBST($1_FALSE)
++[AC_PREREQ(2.52)dnl
++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
++AC_SUBST([$1_TRUE])dnl
++AC_SUBST([$1_FALSE])dnl
++_AM_SUBST_NOTMAKE([$1_TRUE])dnl
++_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+ if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+ else
+ $1_TRUE='#'
+ $1_FALSE=
+-fi])
++fi
++AC_CONFIG_COMMANDS_PRE(
++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
++ AC_MSG_ERROR([[conditional "$1" was never defined.
++Usually this means the macro was only invoked conditionally.]])
++fi])])
+
+-# Do all the work for Automake. This macro actually does too much --
+-# some checks are only needed if your package does certain things.
+-# But this isn't really a big deal.
++# Do all the work for Automake. -*- Autoconf -*-
+
+-# serial 1
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005, 2006, 2008 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-dnl Usage:
+-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
++# serial 13
++
++# This macro actually does too much. Some checks are only needed if
++# your package does certain things. But this isn't really a big deal.
+
++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
++# AM_INIT_AUTOMAKE([OPTIONS])
++# -----------------------------------------------
++# The call with PACKAGE and VERSION arguments is the old style
++# call (pre autoconf-2.50), which is being phased out. PACKAGE
++# and VERSION should now be passed to AC_INIT and removed from
++# the call to AM_INIT_AUTOMAKE.
++# We support both call styles for the transition. After
++# the next Automake release, Autoconf can make the AC_INIT
++# arguments mandatory, and then we can depend on a new Autoconf
++# release and drop the old call support.
+ AC_DEFUN([AM_INIT_AUTOMAKE],
+-[AC_REQUIRE([AC_PROG_INSTALL])
+-PACKAGE=[$1]
+-AC_SUBST(PACKAGE)
+-VERSION=[$2]
+-AC_SUBST(VERSION)
+-dnl test to see if srcdir already configured
+-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++[AC_PREREQ([2.60])dnl
++dnl Autoconf wants to disallow AM_ names. We explicitly allow
++dnl the ones we care about.
++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++AC_REQUIRE([AC_PROG_INSTALL])dnl
++if test "`cd $srcdir && pwd`" != "`pwd`"; then
++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
++ # is not polluted with repeated "-I."
++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
++ # test to see if srcdir already configured
++ if test -f $srcdir/config.status; then
++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++ fi
+ fi
+-ifelse([$3],,
+-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+-AC_REQUIRE([AM_SANITY_CHECK])
+-AC_REQUIRE([AC_ARG_PROGRAM])
+-dnl FIXME This is truly gross.
+-missing_dir=`cd $ac_aux_dir && pwd`
+-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+-AC_REQUIRE([AC_PROG_MAKE_SET])])
+
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
++fi
++AC_SUBST([CYGPATH_W])
++
++# Define the identity of the package.
++dnl Distinguish between old-style and new-style calls.
++m4_ifval([$2],
++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
++ AC_SUBST([PACKAGE], [$1])dnl
++ AC_SUBST([VERSION], [$2])],
++[_AM_SET_OPTIONS([$1])dnl
++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
++
++_AM_IF_OPTION([no-define],,
++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
++
++# Some tools Automake needs.
++AC_REQUIRE([AM_SANITY_CHECK])dnl
++AC_REQUIRE([AC_ARG_PROGRAM])dnl
++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
++AM_MISSING_PROG(AUTOCONF, autoconf)
++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
++AM_MISSING_PROG(AUTOHEADER, autoheader)
++AM_MISSING_PROG(MAKEINFO, makeinfo)
++AM_PROG_INSTALL_SH
++AM_PROG_INSTALL_STRIP
++AC_REQUIRE([AM_PROG_MKDIR_P])dnl
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
++ [_AM_PROG_TAR([v7])])])
++_AM_IF_OPTION([no-dependencies],,
++[AC_PROVIDE_IFELSE([AC_PROG_CC],
++ [_AM_DEPENDENCIES(CC)],
++ [define([AC_PROG_CC],
++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [_AM_DEPENDENCIES(CXX)],
++ [define([AC_PROG_CXX],
++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_OBJC],
++ [_AM_DEPENDENCIES(OBJC)],
++ [define([AC_PROG_OBJC],
++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
++])
++])
++
++
++# When config.status generates a header, we must update the stamp-h file.
++# This file resides in the same directory as the config header
++# that is generated. The stamp files are numbered to have different names.
++
++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
++# loop where config.status creates the headers, so we can generate
++# our stamp files there.
++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
++[# Compute $1's index in $config_headers.
++_am_arg=$1
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++ case $_am_header in
++ $_am_arg | $_am_arg:* )
++ break ;;
++ * )
++ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
++ esac
++done
++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
++
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+ #
+-# Check to make sure that the build environment is sane.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_INSTALL_SH
++# ------------------
++# Define $install_sh.
++AC_DEFUN([AM_PROG_INSTALL_SH],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
++AC_SUBST(install_sh)])
++
++# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 2
++
++# Check whether the underlying file-system supports filenames
++# with a leading dot. For instance MS-DOS doesn't.
++AC_DEFUN([AM_SET_LEADING_DOT],
++[rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
++else
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++AC_SUBST([am__leading_dot])])
++
++# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
++# From Jim Meyering
++
++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 4
++
++AC_DEFUN([AM_MAINTAINER_MODE],
++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
++ dnl maintainer-mode is disabled by default
++ AC_ARG_ENABLE(maintainer-mode,
++[ --enable-maintainer-mode enable make rules and dependencies not useful
++ (and sometimes confusing) to the casual installer],
++ USE_MAINTAINER_MODE=$enableval,
++ USE_MAINTAINER_MODE=no)
++ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
++ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
++ MAINT=$MAINTAINER_MODE_TRUE
++ AC_SUBST(MAINT)dnl
++]
++)
++
++AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
++
++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
++
++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
++# Free Software Foundation, Inc.
+ #
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 5
+
++# AM_MISSING_PROG(NAME, PROGRAM)
++# ------------------------------
++AC_DEFUN([AM_MISSING_PROG],
++[AC_REQUIRE([AM_MISSING_HAS_RUN])
++$1=${$1-"${am_missing_run}$2"}
++AC_SUBST($1)])
++
++
++# AM_MISSING_HAS_RUN
++# ------------------
++# Define MISSING if not defined so far and test if it supports --run.
++# If it does, set am_missing_run to use it, otherwise, to nothing.
++AC_DEFUN([AM_MISSING_HAS_RUN],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++AC_REQUIRE_AUX_FILE([missing])dnl
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
++else
++ am_missing_run=
++ AC_MSG_WARN([`missing' script is too old or missing])
++fi
++])
++
++# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_MKDIR_P
++# ---------------
++# Check for `mkdir -p'.
++AC_DEFUN([AM_PROG_MKDIR_P],
++[AC_PREREQ([2.60])dnl
++AC_REQUIRE([AC_PROG_MKDIR_P])dnl
++dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
++dnl while keeping a definition of mkdir_p for backward compatibility.
++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
++dnl Makefile.ins that do not define MKDIR_P, so we do our own
++dnl adjustment using top_builddir (which is defined more often than
++dnl MKDIR_P).
++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
++case $mkdir_p in
++ [[\\/$]]* | ?:[[\\/]]*) ;;
++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
++esac
++])
++
++# Helper functions for option handling. -*- Autoconf -*-
++
++# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 4
++
++# _AM_MANGLE_OPTION(NAME)
++# -----------------------
++AC_DEFUN([_AM_MANGLE_OPTION],
++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++
++# _AM_SET_OPTION(NAME)
++# ------------------------------
++# Set option NAME. Presently that only means defining a flag for this option.
++AC_DEFUN([_AM_SET_OPTION],
++[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
++
++# _AM_SET_OPTIONS(OPTIONS)
++# ----------------------------------
++# OPTIONS is a space-separated list of Automake options.
++AC_DEFUN([_AM_SET_OPTIONS],
++[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++
++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
++# -------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++AC_DEFUN([_AM_IF_OPTION],
++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
++
++# Check to make sure that the build environment is sane. -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 4
++
++# AM_SANITY_CHECK
++# ---------------
+ AC_DEFUN([AM_SANITY_CHECK],
+ [AC_MSG_CHECKING([whether build environment is sane])
+ # Just in case
+ sleep 1
+-echo timestamp > conftestfile
++echo timestamp > conftest.file
+ # Do `set' in a subshell so we don't clobber the current shell's
+ # arguments. Must try -L first in case configure is actually a
+ # symlink; some systems play weird games with the mod time of symlinks
+ # (eg FreeBSD returns the mod time of the symlink's containing
+ # directory).
+ if (
+- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+- if test "[$]*" = "X"; then
++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
++ if test "$[*]" = "X"; then
+ # -L didn't work.
+- set X `ls -t $srcdir/configure conftestfile`
++ set X `ls -t $srcdir/configure conftest.file`
+ fi
+- if test "[$]*" != "X $srcdir/configure conftestfile" \
+- && test "[$]*" != "X conftestfile $srcdir/configure"; then
++ rm -f conftest.file
++ if test "$[*]" != "X $srcdir/configure conftest.file" \
++ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+@@ -132,7 +469,7 @@
+ alias in your environment])
+ fi
+
+- test "[$]2" = conftestfile
++ test "$[2]" = conftest.file
+ )
+ then
+ # Ok.
+@@ -141,42 +478,142 @@
+ AC_MSG_ERROR([newly created file is older than distributed files!
+ Check your system clock])
+ fi
+-rm -f conftest*
+ AC_MSG_RESULT(yes)])
+
+-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+-dnl The program must properly implement --version.
+-AC_DEFUN([AM_MISSING_PROG],
+-[AC_MSG_CHECKING(for working $2)
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if ($2 --version) < /dev/null > /dev/null 2>&1; then
+- $1=$2
+- AC_MSG_RESULT(found)
+-else
+- $1="$3/missing $2"
+- AC_MSG_RESULT(missing)
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_INSTALL_STRIP
++# ---------------------
++# One issue with vendor `install' (even GNU) is that you can't
++# specify the program used to strip binaries. This is especially
++# annoying in cross-compiling environments, where the build's strip
++# is unlikely to handle the host's binaries.
++# Fortunately install-sh will honor a STRIPPROG variable, so we
++# always use install-sh in `make install-strip', and initialize
++# STRIPPROG with the value of the STRIP variable (set by the user).
++AC_DEFUN([AM_PROG_INSTALL_STRIP],
++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
++if test "$cross_compiling" != no; then
++ AC_CHECK_TOOL([STRIP], [strip], :)
+ fi
+-AC_SUBST($1)])
++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
++AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+-# Add --enable-maintainer-mode option to configure.
+-# From Jim Meyering
++# Copyright (C) 2006 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# serial 1
++# _AM_SUBST_NOTMAKE(VARIABLE)
++# ---------------------------
++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
++# This macro is traced by Automake.
++AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+-AC_DEFUN([AM_MAINTAINER_MODE],
+-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+- dnl maintainer-mode is disabled by default
+- AC_ARG_ENABLE(maintainer-mode,
+-[ --enable-maintainer-mode enable make rules and dependencies not useful
+- (and sometimes confusing) to the casual installer],
+- USE_MAINTAINER_MODE=$enableval,
+- USE_MAINTAINER_MODE=no)
+- AC_MSG_RESULT($USE_MAINTAINER_MODE)
+- AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+- MAINT=$MAINTAINER_MODE_TRUE
+- AC_SUBST(MAINT)dnl
+-]
+-)
++# Check how to create a tarball. -*- Autoconf -*-
++
++# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 2
++
++# _AM_PROG_TAR(FORMAT)
++# --------------------
++# Check how to create a tarball in format FORMAT.
++# FORMAT should be one of `v7', `ustar', or `pax'.
++#
++# Substitute a variable $(am__tar) that is a command
++# writing to stdout a FORMAT-tarball containing the directory
++# $tardir.
++# tardir=directory && $(am__tar) > result.tar
++#
++# Substitute a variable $(am__untar) that extract such
++# a tarball read from stdin.
++# $(am__untar) < result.tar
++AC_DEFUN([_AM_PROG_TAR],
++[# Always define AMTAR for backward compatibility.
++AM_MISSING_PROG([AMTAR], [tar])
++m4_if([$1], [v7],
++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
++ [m4_case([$1], [ustar],, [pax],,
++ [m4_fatal([Unknown tar format])])
++AC_MSG_CHECKING([how to create a $1 tar archive])
++# Loop over all known methods to create a tar archive until one works.
++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
++_am_tools=${am_cv_prog_tar_$1-$_am_tools}
++# Do not fold the above two line into one, because Tru64 sh and
++# Solaris sh will not grok spaces in the rhs of `-'.
++for _am_tool in $_am_tools
++do
++ case $_am_tool in
++ gnutar)
++ for _am_tar in tar gnutar gtar;
++ do
++ AM_RUN_LOG([$_am_tar --version]) && break
++ done
++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
++ am__untar="$_am_tar -xf -"
++ ;;
++ plaintar)
++ # Must skip GNU tar: if it does not support --format= it doesn't create
++ # ustar tarball either.
++ (tar --version) >/dev/null 2>&1 && continue
++ am__tar='tar chf - "$$tardir"'
++ am__tar_='tar chf - "$tardir"'
++ am__untar='tar xf -'
++ ;;
++ pax)
++ am__tar='pax -L -x $1 -w "$$tardir"'
++ am__tar_='pax -L -x $1 -w "$tardir"'
++ am__untar='pax -r'
++ ;;
++ cpio)
++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
++ am__untar='cpio -i -H $1 -d'
++ ;;
++ none)
++ am__tar=false
++ am__tar_=false
++ am__untar=false
++ ;;
++ esac
++
++ # If the value was cached, stop now. We just wanted to have am__tar
++ # and am__untar set.
++ test -n "${am_cv_prog_tar_$1}" && break
+
++ # tar/untar a dummy directory, and stop if the command works
++ rm -rf conftest.dir
++ mkdir conftest.dir
++ echo GrepMe > conftest.dir/file
++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
++ rm -rf conftest.dir
++ if test -s conftest.tar; then
++ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break
++ fi
++done
++rm -rf conftest.dir
++
++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
++AC_MSG_RESULT([$am_cv_prog_tar_$1])])
++AC_SUBST([am__tar])
++AC_SUBST([am__untar])
++]) # _AM_PROG_TAR
++
++m4_include([acinclude.m4])
+diff -urNad ecosconfig-imx~/src/configure ecosconfig-imx/src/configure
+--- ecosconfig-imx~/src/configure 2009-03-16 13:17:55.000000000 -0400
++++ ecosconfig-imx/src/configure 2009-03-16 13:31:50.594305474 -0400
+@@ -1,29 +1,700 @@
+ #! /bin/sh
+-
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated automatically using autoconf version 2.13
+-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
++# Generated by GNU Autoconf 2.63.
+ #
++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
++# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+ # This configure script is free software; the Free Software Foundation
+ # gives unlimited permission to copy, distribute and modify it.
++## --------------------- ##
++## M4sh Initialization. ##
++## --------------------- ##
+
+-# Defaults:
+-ac_help=
++# Be more Bourne compatible
++DUALCASE=1; export DUALCASE # for MKS sh
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++ setopt NO_GLOB_SUBST
++else
++ case `(set -o) 2>/dev/null` in
++ *posix*) set -o posix ;;
++esac
++
++fi
++
++
++
++
++# PATH needs CR
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++as_nl='
++'
++export as_nl
++# Printing a long string crashes Solaris 7 /usr/bin/printf.
++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
++if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
++ as_echo='printf %s\n'
++ as_echo_n='printf %s'
++else
++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
++ as_echo_n='/usr/ucb/echo -n'
++ else
++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
++ as_echo_n_body='eval
++ arg=$1;
++ case $arg in
++ *"$as_nl"*)
++ expr "X$arg" : "X\\(.*\\)$as_nl";
++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
++ esac;
++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
++ '
++ export as_echo_n_body
++ as_echo_n='sh -c $as_echo_n_body as_echo'
++ fi
++ export as_echo_body
++ as_echo='sh -c $as_echo_body as_echo'
++fi
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
++ PATH_SEPARATOR=';'
++ }
++fi
++
++# Support unset when possible.
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++ as_unset=unset
++else
++ as_unset=false
++fi
++
++
++# IFS
++# We need space, tab and new line, in precisely that order. Quoting is
++# there to prevent editors from complaining about space-tab.
++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
++# splitting by setting IFS to empty value.)
++IFS=" "" $as_nl"
++
++# Find who we are. Look in the path if we contain no directory separator.
++case $0 in
++ *[\\/]* ) as_myself=$0 ;;
++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++done
++IFS=$as_save_IFS
++
++ ;;
++esac
++# We did not find ourselves, most probably we were run as `sh COMMAND'
++# in which case we are not to be found in the path.
++if test "x$as_myself" = x; then
++ as_myself=$0
++fi
++if test ! -f "$as_myself"; then
++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
++ { (exit 1); exit 1; }
++fi
++
++# Work around bugs in pre-3.0 UWIN ksh.
++for as_var in ENV MAIL MAILPATH
++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
++done
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++LC_ALL=C
++export LC_ALL
++LANGUAGE=C
++export LANGUAGE
++
++# Required to use basename.
++if expr a : '\(a\)' >/dev/null 2>&1 &&
++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
++
++
++# Name of the executable.
++as_me=`$as_basename -- "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++
++# CDPATH.
++$as_unset CDPATH
++
++
++if test "x$CONFIG_SHELL" = x; then
++ if (eval ":") 2>/dev/null; then
++ as_have_required=yes
++else
++ as_have_required=no
++fi
++
++ if test $as_have_required = yes && (eval ":
++(as_func_return () {
++ (exit \$1)
++}
++as_func_success () {
++ as_func_return 0
++}
++as_func_failure () {
++ as_func_return 1
++}
++as_func_ret_success () {
++ return 0
++}
++as_func_ret_failure () {
++ return 1
++}
++
++exitcode=0
++if as_func_success; then
++ :
++else
++ exitcode=1
++ echo as_func_success failed.
++fi
++
++if as_func_failure; then
++ exitcode=1
++ echo as_func_failure succeeded.
++fi
++
++if as_func_ret_success; then
++ :
++else
++ exitcode=1
++ echo as_func_ret_success failed.
++fi
++
++if as_func_ret_failure; then
++ exitcode=1
++ echo as_func_ret_failure succeeded.
++fi
++
++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
++ :
++else
++ exitcode=1
++ echo positional parameters were not saved.
++fi
++
++test \$exitcode = 0) || { (exit 1); exit 1; }
++
++(
++ as_lineno_1=\$LINENO
++ as_lineno_2=\$LINENO
++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
++") 2> /dev/null; then
++ :
++else
++ as_candidate_shells=
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ case $as_dir in
++ /*)
++ for as_base in sh bash ksh sh5; do
++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
++ done;;
++ esac
++done
++IFS=$as_save_IFS
++
++
++ for as_shell in $as_candidate_shells $SHELL; do
++ # Try only shells that exist, to save several forks.
++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
++ { ("$as_shell") 2> /dev/null <<\_ASEOF
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++ setopt NO_GLOB_SUBST
++else
++ case `(set -o) 2>/dev/null` in
++ *posix*) set -o posix ;;
++esac
++
++fi
++
++
++:
++_ASEOF
++}; then
++ CONFIG_SHELL=$as_shell
++ as_have_required=yes
++ if { "$as_shell" 2> /dev/null <<\_ASEOF
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++ setopt NO_GLOB_SUBST
++else
++ case `(set -o) 2>/dev/null` in
++ *posix*) set -o posix ;;
++esac
++
++fi
++
++
++:
++(as_func_return () {
++ (exit $1)
++}
++as_func_success () {
++ as_func_return 0
++}
++as_func_failure () {
++ as_func_return 1
++}
++as_func_ret_success () {
++ return 0
++}
++as_func_ret_failure () {
++ return 1
++}
++
++exitcode=0
++if as_func_success; then
++ :
++else
++ exitcode=1
++ echo as_func_success failed.
++fi
++
++if as_func_failure; then
++ exitcode=1
++ echo as_func_failure succeeded.
++fi
++
++if as_func_ret_success; then
++ :
++else
++ exitcode=1
++ echo as_func_ret_success failed.
++fi
++
++if as_func_ret_failure; then
++ exitcode=1
++ echo as_func_ret_failure succeeded.
++fi
++
++if ( set x; as_func_ret_success y && test x = "$1" ); then
++ :
++else
++ exitcode=1
++ echo positional parameters were not saved.
++fi
++
++test $exitcode = 0) || { (exit 1); exit 1; }
++
++(
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
++
++_ASEOF
++}; then
++ break
++fi
++
++fi
++
++ done
++
++ if test "x$CONFIG_SHELL" != x; then
++ for as_var in BASH_ENV ENV
++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
++ done
++ export CONFIG_SHELL
++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
++fi
++
++
++ if test $as_have_required = no; then
++ echo This script requires a shell more modern than all the
++ echo shells that I found on your system. Please install a
++ echo modern shell, or manually run the script under such a
++ echo shell if you do have one.
++ { (exit 1); exit 1; }
++fi
++
++
++fi
++
++fi
++
++
++
++(eval "as_func_return () {
++ (exit \$1)
++}
++as_func_success () {
++ as_func_return 0
++}
++as_func_failure () {
++ as_func_return 1
++}
++as_func_ret_success () {
++ return 0
++}
++as_func_ret_failure () {
++ return 1
++}
++
++exitcode=0
++if as_func_success; then
++ :
++else
++ exitcode=1
++ echo as_func_success failed.
++fi
++
++if as_func_failure; then
++ exitcode=1
++ echo as_func_failure succeeded.
++fi
++
++if as_func_ret_success; then
++ :
++else
++ exitcode=1
++ echo as_func_ret_success failed.
++fi
++
++if as_func_ret_failure; then
++ exitcode=1
++ echo as_func_ret_failure succeeded.
++fi
++
++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
++ :
++else
++ exitcode=1
++ echo positional parameters were not saved.
++fi
++
++test \$exitcode = 0") || {
++ echo No shell found that supports shell functions.
++ echo Please tell bug-autoconf@gnu.org about your system,
++ echo including any error possibly output before this message.
++ echo This can help us improve future autoconf versions.
++ echo Configuration will now proceed without shell functions.
++}
++
++
++
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
++
++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
++ # uniformly replaced by the line number. The first 'sed' inserts a
++ # line-number line after each line using $LINENO; the second 'sed'
++ # does the real work. The second script uses 'N' to pair each
++ # line-number line with the line containing $LINENO, and appends
++ # trailing '-' during substitution so that $LINENO is not a special
++ # case at line end.
++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
++ # scripts with optimization help from Paolo Bonzini. Blame Lee
++ # E. McMahon (1931-1989) for sed's syntax. :-)
++ sed -n '
++ p
++ /[$]LINENO/=
++ ' <$as_myself |
++ sed '
++ s/[$]LINENO.*/&-/
++ t lineno
++ b
++ :lineno
++ N
++ :loop
++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
++ t loop
++ s/-\n.*//
++ ' >$as_me.lineno &&
++ chmod +x "$as_me.lineno" ||
++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
++ { (exit 1); exit 1; }; }
++
++ # Don't try to exec as it changes $[0], causing all sort of problems
++ # (the dirname of $[0] is not the place where we might find the
++ # original and so on. Autoconf is especially sensitive to this).
++ . "./$as_me.lineno"
++ # Exit status is that of the last command.
++ exit
++}
++
++
++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
++ as_dirname=dirname
++else
++ as_dirname=false
++fi
++
++ECHO_C= ECHO_N= ECHO_T=
++case `echo -n x` in
++-n*)
++ case `echo 'x\c'` in
++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
++ *) ECHO_C='\c';;
++ esac;;
++*)
++ ECHO_N='-n';;
++esac
++if expr a : '\(a\)' >/dev/null 2>&1 &&
++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++rm -f conf$$ conf$$.exe conf$$.file
++if test -d conf$$.dir; then
++ rm -f conf$$.dir/conf$$.file
++else
++ rm -f conf$$.dir
++ mkdir conf$$.dir 2>/dev/null
++fi
++if (echo >conf$$.file) 2>/dev/null; then
++ if ln -s conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s='ln -s'
++ # ... but there are two gotchas:
++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++ # In both cases, we have to default to `cp -p'.
++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++ as_ln_s='cp -p'
++ elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++ else
++ as_ln_s='cp -p'
++ fi
++else
++ as_ln_s='cp -p'
++fi
++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
++rmdir conf$$.dir 2>/dev/null
++
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p=:
++else
++ test -d ./-p && rmdir ./-p
++ as_mkdir_p=false
++fi
++
++if test -x / >/dev/null 2>&1; then
++ as_test_x='test -x'
++else
++ if ls -dL / >/dev/null 2>&1; then
++ as_ls_L_option=L
++ else
++ as_ls_L_option=
++ fi
++ as_test_x='
++ eval sh -c '\''
++ if test -d "$1"; then
++ test -d "$1/.";
++ else
++ case $1 in
++ -*)set "./$1";;
++ esac;
++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
++ ???[sx]*):;;*)false;;esac;fi
++ '\'' sh
++ '
++fi
++as_executable_p=$as_test_x
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
++
++
++
++exec 7<&0 &1
++
++# Name of the host.
++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
++# so uname gets run too.
++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
++
++#
++# Initializations.
++#
+ ac_default_prefix=/usr/local
+-# Any additions from configure.in:
+-ac_help="$ac_help
+- --enable-maintainer-mode enable make rules and dependencies not useful
+- (and sometimes confusing) to the casual installer"
++ac_clean_files=
++ac_config_libobj_dir=.
++LIBOBJS=
++cross_compiling=no
++subdirs=
++MFLAGS=
++MAKEFLAGS=
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++# Identity of this package.
++PACKAGE_NAME=
++PACKAGE_TARNAME=
++PACKAGE_VERSION=
++PACKAGE_STRING=
++PACKAGE_BUGREPORT=
++
++ac_unique_file="../acsupport/config.guess"
++enable_option_checking=no
++ac_subst_vars='LTLIBOBJS
++LIBOBJS
++subdirs
++SUBDIRS
++MAINT
++MAINTAINER_MODE_FALSE
++MAINTAINER_MODE_TRUE
++am__untar
++am__tar
++AMTAR
++am__leading_dot
++SET_MAKE
++AWK
++mkdir_p
++MKDIR_P
++INSTALL_STRIP_PROGRAM
++STRIP
++install_sh
++MAKEINFO
++AUTOHEADER
++AUTOMAKE
++AUTOCONF
++ACLOCAL
++VERSION
++PACKAGE
++CYGPATH_W
++am__isrc
++INSTALL_DATA
++INSTALL_SCRIPT
++INSTALL_PROGRAM
++host_os
++host_vendor
++host_cpu
++host
++build_os
++build_vendor
++build_cpu
++build
++target_alias
++host_alias
++build_alias
++LIBS
++ECHO_T
++ECHO_N
++ECHO_C
++DEFS
++mandir
++localedir
++libdir
++psdir
++pdfdir
++dvidir
++htmldir
++infodir
++docdir
++oldincludedir
++includedir
++localstatedir
++sharedstatedir
++sysconfdir
++datadir
++datarootdir
++libexecdir
++sbindir
++bindir
++program_transform_name
++prefix
++exec_prefix
++PACKAGE_BUGREPORT
++PACKAGE_STRING
++PACKAGE_VERSION
++PACKAGE_TARNAME
++PACKAGE_NAME
++PATH_SEPARATOR
++SHELL'
++ac_subst_files=''
++ac_user_opts='
++enable_option_checking
++enable_maintainer_mode
++'
++ ac_precious_vars='build_alias
++host_alias
++target_alias'
++ac_subdirs_all='${SUBDIRS}'
+
+ # Initialize some variables set by options.
++ac_init_help=
++ac_init_version=false
++ac_unrecognized_opts=
++ac_unrecognized_sep=
+ # The variables have the same names as the options, with
+ # dashes changed to underlines.
+-build=NONE
+-cache_file=./config.cache
++cache_file=/dev/null
+ exec_prefix=NONE
+-host=NONE
+ no_create=
+-nonopt=NONE
+ no_recursion=
+ prefix=NONE
+ program_prefix=NONE
+@@ -32,94 +703,133 @@
+ silent=
+ site=
+ srcdir=
+-target=NONE
+ verbose=
+ x_includes=NONE
+ x_libraries=NONE
++
++# Installation directory options.
++# These are left unexpanded so users can "make install exec_prefix=/foo"
++# and all the variables that are supposed to be based on exec_prefix
++# by default will actually change.
++# Use braces instead of parens because sh, perl, etc. also accept them.
++# (The list follows the same order as the GNU Coding Standards.)
+ bindir='${exec_prefix}/bin'
+ sbindir='${exec_prefix}/sbin'
+ libexecdir='${exec_prefix}/libexec'
+-datadir='${prefix}/share'
++datarootdir='${prefix}/share'
++datadir='${datarootdir}'
+ sysconfdir='${prefix}/etc'
+ sharedstatedir='${prefix}/com'
+ localstatedir='${prefix}/var'
+-libdir='${exec_prefix}/lib'
+ includedir='${prefix}/include'
+ oldincludedir='/usr/include'
+-infodir='${prefix}/info'
+-mandir='${prefix}/man'
+-
+-# Initialize some other variables.
+-subdirs=
+-MFLAGS= MAKEFLAGS=
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-# Maximum number of lines to put in a shell here document.
+-ac_max_here_lines=12
++docdir='${datarootdir}/doc/${PACKAGE}'
++infodir='${datarootdir}/info'
++htmldir='${docdir}'
++dvidir='${docdir}'
++pdfdir='${docdir}'
++psdir='${docdir}'
++libdir='${exec_prefix}/lib'
++localedir='${datarootdir}/locale'
++mandir='${datarootdir}/man'
+
+ ac_prev=
++ac_dashdash=
+ for ac_option
+ do
+-
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+- eval "$ac_prev=\$ac_option"
++ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+- case "$ac_option" in
+- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+- *) ac_optarg= ;;
++ case $ac_option in
++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
++ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+- case "$ac_option" in
++ case $ac_dashdash$ac_option in
++ --)
++ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+- bindir="$ac_optarg" ;;
++ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+- ac_prev=build ;;
++ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+- build="$ac_optarg" ;;
++ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+- cache_file="$ac_optarg" ;;
++ cache_file=$ac_optarg ;;
+
+- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
++ --config-cache | -C)
++ cache_file=config.cache ;;
++
++ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+- | --da=*)
+- datadir="$ac_optarg" ;;
++ -datadir=* | --datadir=* | --datadi=* | --datad=*)
++ datadir=$ac_optarg ;;
++
++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
++ | --dataroo | --dataro | --datar)
++ ac_prev=datarootdir ;;
++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
++ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
++ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+- fi
+- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+- eval "enable_${ac_feature}=no" ;;
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
++ { (exit 1); exit 1; }; }
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"enable_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval enable_$ac_useropt=no ;;
++
++ -docdir | --docdir | --docdi | --doc | --do)
++ ac_prev=docdir ;;
++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
++ docdir=$ac_optarg ;;
++
++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
++ ac_prev=dvidir ;;
++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
++ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
++ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+- fi
+- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+- case "$ac_option" in
+- *=*) ;;
+- *) ac_optarg=yes ;;
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
++ { (exit 1); exit 1; }; }
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"enable_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
+ esac
+- eval "enable_${ac_feature}='$ac_optarg'" ;;
++ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+@@ -128,116 +838,77 @@
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+- exec_prefix="$ac_optarg" ;;
++ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+- -help | --help | --hel | --he)
+- # Omit some internal or obsolete options to make the list less imposing.
+- # This message is too long to be a string in the A/UX 3.1 sh.
+- cat << EOF
+-Usage: configure [options] [host]
+-Options: [defaults in brackets after descriptions]
+-Configuration:
+- --cache-file=FILE cache test results in FILE
+- --help print this message
+- --no-create do not create output files
+- --quiet, --silent do not print \`checking...' messages
+- --version print the version of autoconf that created configure
+-Directory and file names:
+- --prefix=PREFIX install architecture-independent files in PREFIX
+- [$ac_default_prefix]
+- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+- [same as prefix]
+- --bindir=DIR user executables in DIR [EPREFIX/bin]
+- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
+- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
+- --datadir=DIR read-only architecture-independent data in DIR
+- [PREFIX/share]
+- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
+- --sharedstatedir=DIR modifiable architecture-independent data in DIR
+- [PREFIX/com]
+- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
+- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
+- --includedir=DIR C header files in DIR [PREFIX/include]
+- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
+- --infodir=DIR info documentation in DIR [PREFIX/info]
+- --mandir=DIR man documentation in DIR [PREFIX/man]
+- --srcdir=DIR find the sources in DIR [configure dir or ..]
+- --program-prefix=PREFIX prepend PREFIX to installed program names
+- --program-suffix=SUFFIX append SUFFIX to installed program names
+- --program-transform-name=PROGRAM
+- run sed PROGRAM on installed program names
+-EOF
+- cat << EOF
+-Host type:
+- --build=BUILD configure for building on BUILD [BUILD=HOST]
+- --host=HOST configure for HOST [guessed]
+- --target=TARGET configure for TARGET [TARGET=HOST]
+-Features and packages:
+- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+- --x-includes=DIR X include files are in DIR
+- --x-libraries=DIR X library files are in DIR
+-EOF
+- if test -n "$ac_help"; then
+- echo "--enable and --with options recognized:$ac_help"
+- fi
+- exit 0 ;;
++ -help | --help | --hel | --he | -h)
++ ac_init_help=long ;;
++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
++ ac_init_help=recursive ;;
++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
++ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+- ac_prev=host ;;
++ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+- host="$ac_optarg" ;;
++ host_alias=$ac_optarg ;;
++
++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
++ ac_prev=htmldir ;;
++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
++ | --ht=*)
++ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+- includedir="$ac_optarg" ;;
++ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+- infodir="$ac_optarg" ;;
++ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+- libdir="$ac_optarg" ;;
++ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+- libexecdir="$ac_optarg" ;;
++ libexecdir=$ac_optarg ;;
++
++ -localedir | --localedir | --localedi | --localed | --locale)
++ ac_prev=localedir ;;
++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
++ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+- | --localstate | --localstat | --localsta | --localst \
+- | --locals | --local | --loca | --loc | --lo)
++ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+- localstatedir="$ac_optarg" ;;
++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
++ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+- mandir="$ac_optarg" ;;
++ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+- | --no-cr | --no-c)
++ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+@@ -251,26 +922,26 @@
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+- oldincludedir="$ac_optarg" ;;
++ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+- prefix="$ac_optarg" ;;
++ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+- program_prefix="$ac_optarg" ;;
++ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+- program_suffix="$ac_optarg" ;;
++ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+@@ -287,7 +958,17 @@
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+- program_transform_name="$ac_optarg" ;;
++ program_transform_name=$ac_optarg ;;
++
++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
++ ac_prev=pdfdir ;;
++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
++ pdfdir=$ac_optarg ;;
++
++ -psdir | --psdir | --psdi | --psd | --ps)
++ ac_prev=psdir ;;
++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
++ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+@@ -297,7 +978,7 @@
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+- sbindir="$ac_optarg" ;;
++ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+@@ -308,58 +989,69 @@
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+- sharedstatedir="$ac_optarg" ;;
++ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+- site="$ac_optarg" ;;
++ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+- srcdir="$ac_optarg" ;;
++ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+- sysconfdir="$ac_optarg" ;;
++ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+- ac_prev=target ;;
++ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+- target="$ac_optarg" ;;
++ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+- -version | --version | --versio | --versi | --vers)
+- echo "configure generated by autoconf version 2.13"
+- exit 0 ;;
++ -version | --version | --versio | --versi | --vers | -V)
++ ac_init_version=: ;;
+
+ -with-* | --with-*)
+- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
++ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+- fi
+- ac_package=`echo $ac_package| sed 's/-/_/g'`
+- case "$ac_option" in
+- *=*) ;;
+- *) ac_optarg=yes ;;
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
++ { (exit 1); exit 1; }; }
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"with_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
+ esac
+- eval "with_${ac_package}='$ac_optarg'" ;;
++ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
++ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+- fi
+- ac_package=`echo $ac_package| sed 's/-/_/g'`
+- eval "with_${ac_package}=no" ;;
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
++ { (exit 1); exit 1; }; }
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"with_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+@@ -370,205 +1062,809 @@
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+- x_includes="$ac_optarg" ;;
++ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+- x_libraries="$ac_optarg" ;;
++ x_libraries=$ac_optarg ;;
+
+- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
++ -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
++Try \`$0 --help' for more information." >&2
++ { (exit 1); exit 1; }; }
+ ;;
+
++ *=*)
++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
++ { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
++ { (exit 1); exit 1; }; }
++ eval $ac_envvar=\$ac_optarg
++ export $ac_envvar ;;
++
+ *)
+- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+- echo "configure: warning: $ac_option: invalid host type" 1>&2
+- fi
+- if test "x$nonopt" != xNONE; then
+- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+- fi
+- nonopt="$ac_option"
++ # FIXME: should be removed in autoconf 3.0.
++ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
++ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+ done
+
+ if test -n "$ac_prev"; then
+- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
++ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
++ { $as_echo "$as_me: error: missing argument to $ac_option" >&2
++ { (exit 1); exit 1; }; }
+ fi
+
+-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+-
+-# File descriptor usage:
+-# 0 standard input
+-# 1 file creation
+-# 2 errors and warnings
+-# 3 some systems may open it to /dev/tty
+-# 4 used on the Kubota Titan
+-# 6 checking for... messages and results
+-# 5 compiler messages saved in config.log
+-if test "$silent" = yes; then
+- exec 6>/dev/null
+-else
+- exec 6>&1
++if test -n "$ac_unrecognized_opts"; then
++ case $enable_option_checking in
++ no) ;;
++ fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
++ { (exit 1); exit 1; }; } ;;
++ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
++ esac
+ fi
+-exec 5>./config.log
+-
+-echo "\
+-This file contains any messages produced by compilers while
+-running configure, to aid debugging if configure makes a mistake.
+-" 1>&5
+
+-# Strip out --no-create and --no-recursion so they do not pile up.
+-# Also quote any args containing shell metacharacters.
+-ac_configure_args=
+-for ac_arg
++# Check all directory arguments for consistency.
++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
++ datadir sysconfdir sharedstatedir localstatedir includedir \
++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
++ libdir localedir mandir
+ do
+- case "$ac_arg" in
+- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+- | --no-cr | --no-c) ;;
+- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
++ eval ac_val=\$$ac_var
++ # Remove trailing slashes.
++ case $ac_val in
++ */ )
++ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
++ eval $ac_var=\$ac_val;;
+ esac
++ # Be sure to have absolute directory names.
++ case $ac_val in
++ [\\/$]* | ?:[\\/]* ) continue;;
++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
++ esac
++ { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
++ { (exit 1); exit 1; }; }
+ done
+
+-# NLS nuisances.
+-# Only set these to C if already set. These must not be set unconditionally
+-# because not all systems understand e.g. LANG=C (notably SCO).
+-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+-# Non-C LC_CTYPE values break the ctype check.
+-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
++# There might be people who depend on the old broken behavior: `$host'
++# used to hold the argument of --host etc.
++# FIXME: To remove some day.
++build=$build_alias
++host=$host_alias
++target=$target_alias
+
+-# confdefs.h avoids OS command line length limits that DEFS can exceed.
+-rm -rf conftest* confdefs.h
+-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+-echo > confdefs.h
++# FIXME: To remove some day.
++if test "x$host_alias" != x; then
++ if test "x$build_alias" = x; then
++ cross_compiling=maybe
++ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
++ If a cross compiler is detected then cross compile mode will be used." >&2
++ elif test "x$build_alias" != "x$host_alias"; then
++ cross_compiling=yes
++ fi
++fi
++
++ac_tool_prefix=
++test -n "$host_alias" && ac_tool_prefix=$host_alias-
++
++test "$silent" = yes && exec 6>/dev/null
++
++
++ac_pwd=`pwd` && test -n "$ac_pwd" &&
++ac_ls_di=`ls -di .` &&
++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
++ { $as_echo "$as_me: error: working directory cannot be determined" >&2
++ { (exit 1); exit 1; }; }
++test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
++ { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
++ { (exit 1); exit 1; }; }
+
+-# A filename unique to this package, relative to the directory that
+-# configure is in, which we can look for to find out if srcdir is correct.
+-ac_unique_file=../acsupport/config.guess
+
+ # Find the source files, if location was not specified.
+ if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+- # Try the directory containing this script, then its parent.
+- ac_prog=$0
+- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
++ # Try the directory containing this script, then the parent directory.
++ ac_confdir=`$as_dirname -- "$as_myself" ||
++$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_myself" : 'X\(//\)[^/]' \| \
++ X"$as_myself" : 'X\(//\)$' \| \
++ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_myself" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
+ srcdir=$ac_confdir
+- if test ! -r $srcdir/$ac_unique_file; then
++ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+ else
+ ac_srcdir_defaulted=no
+ fi
+-if test ! -r $srcdir/$ac_unique_file; then
+- if test "$ac_srcdir_defaulted" = yes; then
+- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+- else
+- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+- fi
++if test ! -r "$srcdir/$ac_unique_file"; then
++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
++ { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
++ { (exit 1); exit 1; }; }
+ fi
+-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
++ac_abs_confdir=`(
++ cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
++ { (exit 1); exit 1; }; }
++ pwd)`
++# When building in place, set srcdir=.
++if test "$ac_abs_confdir" = "$ac_pwd"; then
++ srcdir=.
++fi
++# Remove unnecessary trailing slashes from srcdir.
++# Double slashes in file names in object file debugging info
++# mess up M-x gdb in Emacs.
++case $srcdir in
++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
++esac
++for ac_var in $ac_precious_vars; do
++ eval ac_env_${ac_var}_set=\${${ac_var}+set}
++ eval ac_env_${ac_var}_value=\$${ac_var}
++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
++ eval ac_cv_env_${ac_var}_value=\$${ac_var}
++done
+
+-# Prefer explicitly selected file to automatically selected ones.
+-if test -z "$CONFIG_SITE"; then
+- if test "x$prefix" != xNONE; then
+- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+- else
+- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+- fi
++#
++# Report the --help message.
++#
++if test "$ac_init_help" = "long"; then
++ # Omit some internal or obsolete options to make the list less imposing.
++ # This message is too long to be a string in the A/UX 3.1 sh.
++ cat <<_ACEOF
++\`configure' configures this package to adapt to many kinds of systems.
++
++Usage: $0 [OPTION]... [VAR=VALUE]...
++
++To assign environment variables (e.g., CC, CFLAGS...), specify them as
++VAR=VALUE. See below for descriptions of some of the useful variables.
++
++Defaults for the options are specified in brackets.
++
++Configuration:
++ -h, --help display this help and exit
++ --help=short display options specific to this package
++ --help=recursive display the short help of all the included packages
++ -V, --version display version information and exit
++ -q, --quiet, --silent do not print \`checking...' messages
++ --cache-file=FILE cache test results in FILE [disabled]
++ -C, --config-cache alias for \`--cache-file=config.cache'
++ -n, --no-create do not create output files
++ --srcdir=DIR find the sources in DIR [configure dir or \`..']
++
++Installation directories:
++ --prefix=PREFIX install architecture-independent files in PREFIX
++ [$ac_default_prefix]
++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
++ [PREFIX]
++
++By default, \`make install' will install all the files in
++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
++an installation prefix other than \`$ac_default_prefix' using \`--prefix',
++for instance \`--prefix=\$HOME'.
++
++For better control, use the options below.
++
++Fine tuning of the installation directories:
++ --bindir=DIR user executables [EPREFIX/bin]
++ --sbindir=DIR system admin executables [EPREFIX/sbin]
++ --libexecdir=DIR program executables [EPREFIX/libexec]
++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
++ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
++ --libdir=DIR object code libraries [EPREFIX/lib]
++ --includedir=DIR C header files [PREFIX/include]
++ --oldincludedir=DIR C header files for non-gcc [/usr/include]
++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
++ --infodir=DIR info documentation [DATAROOTDIR/info]
++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
++ --mandir=DIR man documentation [DATAROOTDIR/man]
++ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
++ --htmldir=DIR html documentation [DOCDIR]
++ --dvidir=DIR dvi documentation [DOCDIR]
++ --pdfdir=DIR pdf documentation [DOCDIR]
++ --psdir=DIR ps documentation [DOCDIR]
++_ACEOF
++
++ cat <<\_ACEOF
++
++Program names:
++ --program-prefix=PREFIX prepend PREFIX to installed program names
++ --program-suffix=SUFFIX append SUFFIX to installed program names
++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
++
++System types:
++ --build=BUILD configure for building on BUILD [guessed]
++ --host=HOST cross-compile to build programs to run on HOST [BUILD]
++_ACEOF
+ fi
+-for ac_site_file in $CONFIG_SITE; do
++
++if test -n "$ac_init_help"; then
++
++ cat <<\_ACEOF
++
++Optional Features:
++ --disable-option-checking ignore unrecognized --enable/--with options
++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
++ --enable-maintainer-mode enable make rules and dependencies not useful
++ (and sometimes confusing) to the casual installer
++
++_ACEOF
++ac_status=$?
++fi
++
++if test "$ac_init_help" = "recursive"; then
++ # If there are subdirs, report their specific --help.
++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
++ test -d "$ac_dir" ||
++ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
++ continue
++ ac_builddir=.
++
++case "$ac_dir" in
++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
++*)
++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
++ # A ".." for each directory in $ac_dir_suffix.
++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
++ case $ac_top_builddir_sub in
++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
++ esac ;;
++esac
++ac_abs_top_builddir=$ac_pwd
++ac_abs_builddir=$ac_pwd$ac_dir_suffix
++# for backward compatibility:
++ac_top_builddir=$ac_top_build_prefix
++
++case $srcdir in
++ .) # We are building in place.
++ ac_srcdir=.
++ ac_top_srcdir=$ac_top_builddir_sub
++ ac_abs_top_srcdir=$ac_pwd ;;
++ [\\/]* | ?:[\\/]* ) # Absolute name.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir
++ ac_abs_top_srcdir=$srcdir ;;
++ *) # Relative name.
++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_build_prefix$srcdir
++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
++esac
++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
++
++ cd "$ac_dir" || { ac_status=$?; continue; }
++ # Check for guested configure.
++ if test -f "$ac_srcdir/configure.gnu"; then
++ echo &&
++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
++ elif test -f "$ac_srcdir/configure"; then
++ echo &&
++ $SHELL "$ac_srcdir/configure" --help=recursive
++ else
++ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
++ fi || ac_status=$?
++ cd "$ac_pwd" || { ac_status=$?; break; }
++ done
++fi
++
++test -n "$ac_init_help" && exit $ac_status
++if $ac_init_version; then
++ cat <<\_ACEOF
++configure
++generated by GNU Autoconf 2.63
++
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
++2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
++This configure script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it.
++_ACEOF
++ exit
++fi
++cat >config.log <<_ACEOF
++This file contains any messages produced by compilers while
++running configure, to aid debugging if configure makes a mistake.
++
++It was created by $as_me, which was
++generated by GNU Autoconf 2.63. Invocation command line was
++
++ $ $0 $@
++
++_ACEOF
++exec 5>>config.log
++{
++cat <<_ASUNAME
++## --------- ##
++## Platform. ##
++## --------- ##
++
++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
++
++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
++
++_ASUNAME
++
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ $as_echo "PATH: $as_dir"
++done
++IFS=$as_save_IFS
++
++} >&5
++
++cat >&5 <<_ACEOF
++
++
++## ----------- ##
++## Core tests. ##
++## ----------- ##
++
++_ACEOF
++
++
++# Keep a trace of the command line.
++# Strip out --no-create and --no-recursion so they do not pile up.
++# Strip out --silent because we don't want to record it for future runs.
++# Also quote any args containing shell meta-characters.
++# Make two passes to allow for proper duplicate-argument suppression.
++ac_configure_args=
++ac_configure_args0=
++ac_configure_args1=
++ac_must_keep_next=false
++for ac_pass in 1 2
++do
++ for ac_arg
++ do
++ case $ac_arg in
++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil)
++ continue ;;
++ *\'*)
++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ case $ac_pass in
++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
++ 2)
++ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
++ if test $ac_must_keep_next = true; then
++ ac_must_keep_next=false # Got value, back to normal.
++ else
++ case $ac_arg in
++ *=* | --config-cache | -C | -disable-* | --disable-* \
++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
++ | -with-* | --with-* | -without-* | --without-* | --x)
++ case "$ac_configure_args0 " in
++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
++ esac
++ ;;
++ -* ) ac_must_keep_next=true ;;
++ esac
++ fi
++ ac_configure_args="$ac_configure_args '$ac_arg'"
++ ;;
++ esac
++ done
++done
++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
++
++# When interrupted or exit'd, cleanup temporary files, and complete
++# config.log. We remove comments because anyway the quotes in there
++# would cause problems or look ugly.
++# WARNING: Use '\'' to represent an apostrophe within the trap.
++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
++trap 'exit_status=$?
++ # Save into config.log some information that might help in debugging.
++ {
++ echo
++
++ cat <<\_ASBOX
++## ---------------- ##
++## Cache variables. ##
++## ---------------- ##
++_ASBOX
++ echo
++ # The following way of writing the cache mishandles newlines in values,
++(
++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
++ eval ac_val=\$$ac_var
++ case $ac_val in #(
++ *${as_nl}*)
++ case $ac_var in #(
++ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
++ esac
++ case $ac_var in #(
++ _ | IFS | as_nl) ;; #(
++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
++ *) $as_unset $ac_var ;;
++ esac ;;
++ esac
++ done
++ (set) 2>&1 |
++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
++ *${as_nl}ac_space=\ *)
++ sed -n \
++ "s/'\''/'\''\\\\'\'''\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
++ ;; #(
++ *)
++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
++ ;;
++ esac |
++ sort
++)
++ echo
++
++ cat <<\_ASBOX
++## ----------------- ##
++## Output variables. ##
++## ----------------- ##
++_ASBOX
++ echo
++ for ac_var in $ac_subst_vars
++ do
++ eval ac_val=\$$ac_var
++ case $ac_val in
++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ esac
++ $as_echo "$ac_var='\''$ac_val'\''"
++ done | sort
++ echo
++
++ if test -n "$ac_subst_files"; then
++ cat <<\_ASBOX
++## ------------------- ##
++## File substitutions. ##
++## ------------------- ##
++_ASBOX
++ echo
++ for ac_var in $ac_subst_files
++ do
++ eval ac_val=\$$ac_var
++ case $ac_val in
++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ esac
++ $as_echo "$ac_var='\''$ac_val'\''"
++ done | sort
++ echo
++ fi
++
++ if test -s confdefs.h; then
++ cat <<\_ASBOX
++## ----------- ##
++## confdefs.h. ##
++## ----------- ##
++_ASBOX
++ echo
++ cat confdefs.h
++ echo
++ fi
++ test "$ac_signal" != 0 &&
++ $as_echo "$as_me: caught signal $ac_signal"
++ $as_echo "$as_me: exit $exit_status"
++ } >&5
++ rm -f core *.core core.conftest.* &&
++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
++ exit $exit_status
++' 0
++for ac_signal in 1 2 13 15; do
++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
++done
++ac_signal=0
++
++# confdefs.h avoids OS command line length limits that DEFS can exceed.
++rm -f -r conftest* confdefs.h
++
++# Predefined preprocessor variables.
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_NAME "$PACKAGE_NAME"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_VERSION "$PACKAGE_VERSION"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_STRING "$PACKAGE_STRING"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
++_ACEOF
++
++
++# Let the site file select an alternate cache file if it wants to.
++# Prefer an explicitly selected file to automatically selected ones.
++ac_site_file1=NONE
++ac_site_file2=NONE
++if test -n "$CONFIG_SITE"; then
++ ac_site_file1=$CONFIG_SITE
++elif test "x$prefix" != xNONE; then
++ ac_site_file1=$prefix/share/config.site
++ ac_site_file2=$prefix/etc/config.site
++else
++ ac_site_file1=$ac_default_prefix/share/config.site
++ ac_site_file2=$ac_default_prefix/etc/config.site
++fi
++for ac_site_file in "$ac_site_file1" "$ac_site_file2"
++do
++ test "x$ac_site_file" = xNONE && continue
+ if test -r "$ac_site_file"; then
+- echo "loading site script $ac_site_file"
++ { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
++$as_echo "$as_me: loading site script $ac_site_file" >&6;}
++ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+ done
+
+ if test -r "$cache_file"; then
+- echo "loading cache $cache_file"
+- . $cache_file
++ # Some versions of bash will fail to source /dev/null (special
++ # files actually), so we avoid doing that.
++ if test -f "$cache_file"; then
++ { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
++$as_echo "$as_me: loading cache $cache_file" >&6;}
++ case $cache_file in
++ [\\/]* | ?:[\\/]* ) . "$cache_file";;
++ *) . "./$cache_file";;
++ esac
++ fi
+ else
+- echo "creating cache $cache_file"
+- > $cache_file
++ { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
++$as_echo "$as_me: creating cache $cache_file" >&6;}
++ >$cache_file
+ fi
+
+-ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
+-
+-ac_exeext=
+-ac_objext=o
+-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+- ac_n= ac_c='
+-' ac_t=' '
+- else
+- ac_n=-n ac_c= ac_t=
++# Check that the precious variables saved in the cache have kept the same
++# value.
++ac_cache_corrupted=false
++for ac_var in $ac_precious_vars; do
++ eval ac_old_set=\$ac_cv_env_${ac_var}_set
++ eval ac_new_set=\$ac_env_${ac_var}_set
++ eval ac_old_val=\$ac_cv_env_${ac_var}_value
++ eval ac_new_val=\$ac_env_${ac_var}_value
++ case $ac_old_set,$ac_new_set in
++ set,)
++ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,set)
++ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,);;
++ *)
++ if test "x$ac_old_val" != "x$ac_new_val"; then
++ # differences in whitespace do not lead to failure.
++ ac_old_val_w=`echo x $ac_old_val`
++ ac_new_val_w=`echo x $ac_new_val`
++ if test "$ac_old_val_w" != "$ac_new_val_w"; then
++ { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
++ ac_cache_corrupted=:
++ else
++ { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
++ eval $ac_var=\$ac_old_val
++ fi
++ { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
++ { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
++ fi;;
++ esac
++ # Pass precious variables to config.status.
++ if test "$ac_new_set" = set; then
++ case $ac_new_val in
++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
++ *) ac_arg=$ac_var=$ac_new_val ;;
++ esac
++ case " $ac_configure_args " in
++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
++ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
++ esac
+ fi
+-else
+- ac_n= ac_c='\c' ac_t=
++done
++if $ac_cache_corrupted; then
++ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++ { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
++ { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
++$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+
+
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
+ ac_aux_dir=
+-for ac_dir in ../acsupport $srcdir/../acsupport; do
+- if test -f $ac_dir/install-sh; then
++for ac_dir in ../acsupport "$srcdir"/../acsupport; do
++ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+- elif test -f $ac_dir/install.sh; then
++ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
++ elif test -f "$ac_dir/shtool"; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/shtool install -c"
++ break
+ fi
+ done
+ if test -z "$ac_aux_dir"; then
+- { echo "configure: error: can not find install-sh or install.sh in ../acsupport $srcdir/../acsupport" 1>&2; exit 1; }
++ { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../acsupport \"$srcdir\"/../acsupport" >&5
++$as_echo "$as_me: error: cannot find install-sh or install.sh in ../acsupport \"$srcdir\"/../acsupport" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+-ac_config_guess=$ac_aux_dir/config.guess
+-ac_config_sub=$ac_aux_dir/config.sub
+-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
++
++# These three variables are undocumented and unsupported,
++# and are intended to be withdrawn in a future Autoconf release.
++# They can cause serious problems if a builder's source tree is in a directory
++# whose full name contains unusual characters.
++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+ # Make sure we can run config.sub.
+-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
++ { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
++$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
++ { (exit 1); exit 1; }; }
++
++{ $as_echo "$as_me:$LINENO: checking build system type" >&5
++$as_echo_n "checking build system type... " >&6; }
++if test "${ac_cv_build+set}" = set; then
++ $as_echo_n "(cached) " >&6
++else
++ ac_build_alias=$build_alias
++test "x$ac_build_alias" = x &&
++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
++test "x$ac_build_alias" = x &&
++ { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
++$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
++ { (exit 1); exit 1; }; }
++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
++ { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
++$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
++ { (exit 1); exit 1; }; }
++
+ fi
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
++$as_echo "$ac_cv_build" >&6; }
++case $ac_cv_build in
++*-*-*) ;;
++*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
++$as_echo "$as_me: error: invalid value of canonical build" >&2;}
++ { (exit 1); exit 1; }; };;
++esac
++build=$ac_cv_build
++ac_save_IFS=$IFS; IFS='-'
++set x $ac_cv_build
++shift
++build_cpu=$1
++build_vendor=$2
++shift; shift
++# Remember, the first character of IFS is used to create $*,
++# except with old shells:
++build_os=$*
++IFS=$ac_save_IFS
++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+-echo $ac_n "checking host system type""... $ac_c" 1>&6
+-echo "configure:554: checking host system type" >&5
+
+-host_alias=$host
+-case "$host_alias" in
+-NONE)
+- case $nonopt in
+- NONE)
+- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+- fi ;;
+- *) host_alias=$nonopt ;;
+- esac ;;
++{ $as_echo "$as_me:$LINENO: checking host system type" >&5
++$as_echo_n "checking host system type... " >&6; }
++if test "${ac_cv_host+set}" = set; then
++ $as_echo_n "(cached) " >&6
++else
++ if test "x$host_alias" = x; then
++ ac_cv_host=$ac_cv_build
++else
++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
++ { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
++$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
++ { (exit 1); exit 1; }; }
++fi
++
++fi
++{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
++$as_echo "$ac_cv_host" >&6; }
++case $ac_cv_host in
++*-*-*) ;;
++*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
++$as_echo "$as_me: error: invalid value of canonical host" >&2;}
++ { (exit 1); exit 1; }; };;
+ esac
++host=$ac_cv_host
++ac_save_IFS=$IFS; IFS='-'
++set x $ac_cv_host
++shift
++host_cpu=$1
++host_vendor=$2
++shift; shift
++# Remember, the first character of IFS is used to create $*,
++# except with old shells:
++host_os=$*
++IFS=$ac_save_IFS
++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+-echo "$ac_t""$host" 1>&6
++
++am__api_version='1.10'
+
+ # Find a good install program. We prefer a C program (faster),
+ # so one script is as good as another. But avoid the broken or
+@@ -577,649 +1873,1838 @@
+ # SunOS /usr/etc/install
+ # IRIX /sbin/install
+ # AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
+ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+ # AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
++# OS/2's system install, which has a completely different semantic
+ # ./install, which can be erroneously created by make from ./install.sh.
+-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+-echo "configure:586: checking for a BSD compatible install" >&5
++# Reject install programs that cannot install multiple files.
++{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
++$as_echo_n "checking for a BSD-compatible install... " >&6; }
+ if test -z "$INSTALL"; then
+-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test "${ac_cv_path_install+set}" = set; then
++ $as_echo_n "(cached) " >&6
+ else
+- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+- for ac_dir in $PATH; do
+- # Account for people who put trailing slashes in PATH elements.
+- case "$ac_dir/" in
+- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+- *)
+- # OSF1 and SCO ODT 3.0 have their own names for install.
+- # Don't use installbsd from OSF since it installs stuff as root
+- # by default.
+- for ac_prog in ginstall scoinst install; do
+- if test -f $ac_dir/$ac_prog; then
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ # Account for people who put trailing slashes in PATH elements.
++case $as_dir/ in
++ ./ | .// | /cC/* | \
++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
++ /usr/ucb/* ) ;;
++ *)
++ # OSF1 and SCO ODT 3.0 have their own names for install.
++ # Don't use installbsd from OSF since it installs stuff as root
++ # by default.
++ for ac_prog in ginstall scoinst install; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
++ elif test $ac_prog = install &&
++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
++ :
+ else
+- ac_cv_path_install="$ac_dir/$ac_prog -c"
+- break 2
++ rm -rf conftest.one conftest.two conftest.dir
++ echo one > conftest.one
++ echo two > conftest.two
++ mkdir conftest.dir
++ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
++ test -s conftest.one && test -s conftest.two &&
++ test -s conftest.dir/conftest.one &&
++ test -s conftest.dir/conftest.two
++ then
++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++ break 3
++ fi
+ fi
+ fi
+ done
+- ;;
+- esac
+- done
+- IFS="$ac_save_IFS"
++ done
++ ;;
++esac
++
++done
++IFS=$as_save_IFS
++
++rm -rf conftest.one conftest.two conftest.dir
+
+ fi
+ if test "${ac_cv_path_install+set}" = set; then
+- INSTALL="$ac_cv_path_install"
++ INSTALL=$ac_cv_path_install
+ else
+- # As a last resort, use the slow shell script. We don't cache a
+- # path for INSTALL within a source directory, because that will
++ # As a last resort, use the slow shell script. Don't cache a
++ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+- # removed, or if the path is relative.
+- INSTALL="$ac_install_sh"
++ # removed, or if the value is a relative name.
++ INSTALL=$ac_install_sh
+ fi
+ fi
+-echo "$ac_t""$INSTALL" 1>&6
++{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
++$as_echo "$INSTALL" >&6; }
+
+ # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+ # It thinks the first close brace ends the variable substitution.
+ test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+-echo "configure:639: checking whether build environment is sane" >&5
++{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
++$as_echo_n "checking whether build environment is sane... " >&6; }
+ # Just in case
+ sleep 1
+-echo timestamp > conftestfile
++echo timestamp > conftest.file
+ # Do `set' in a subshell so we don't clobber the current shell's
+ # arguments. Must try -L first in case configure is actually a
+ # symlink; some systems play weird games with the mod time of symlinks
+ # (eg FreeBSD returns the mod time of the symlink's containing
+ # directory).
+ if (
+- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+- set X `ls -t $srcdir/configure conftestfile`
++ set X `ls -t $srcdir/configure conftest.file`
+ fi
+- if test "$*" != "X $srcdir/configure conftestfile" \
+- && test "$*" != "X conftestfile $srcdir/configure"; then
++ rm -f conftest.file
++ if test "$*" != "X $srcdir/configure conftest.file" \
++ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+-alias in your environment" 1>&2; exit 1; }
++ { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
++alias in your environment" >&5
++$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
++alias in your environment" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+
+- test "$2" = conftestfile
++ test "$2" = conftest.file
+ )
+ then
+ # Ok.
+ :
+ else
+- { echo "configure: error: newly created file is older than distributed files!
+-Check your system clock" 1>&2; exit 1; }
+-fi
+-rm -f conftest*
+-echo "$ac_t""yes" 1>&6
+-if test "$program_transform_name" = s,x,x,; then
+- program_transform_name=
+-else
+- # Double any \ or $. echo might interpret backslashes.
+- cat <<\EOF_SED > conftestsed
+-s,\\,\\\\,g; s,\$,$$,g
+-EOF_SED
+- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+- rm -f conftestsed
++ { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
++Check your system clock" >&5
++$as_echo "$as_me: error: newly created file is older than distributed files!
++Check your system clock" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
++{ $as_echo "$as_me:$LINENO: result: yes" >&5
++$as_echo "yes" >&6; }
+ test "$program_prefix" != NONE &&
+- program_transform_name="s,^,${program_prefix},; $program_transform_name"
++ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+ # Use a double $ so make ignores it.
+ test "$program_suffix" != NONE &&
+- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
++ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
++# Double any \ or $.
++# By default was `s,x,x', remove it if useless.
++ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
++program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+-# sed with no file args requires a program.
+-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
+
+-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+-echo "configure:696: checking whether ${MAKE-make} sets \${MAKE}" >&5
+-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
+ else
+- cat > conftestmake <<\EOF
+-all:
+- @echo 'ac_maketemp="${MAKE}"'
+-EOF
+-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+-if test -n "$ac_maketemp"; then
+- eval ac_cv_prog_make_${ac_make}_set=yes
++ am_missing_run=
++ { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
++$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
++fi
++
++{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
++$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
++if test -z "$MKDIR_P"; then
++ if test "${ac_cv_path_mkdir+set}" = set; then
++ $as_echo_n "(cached) " >&6
+ else
+- eval ac_cv_prog_make_${ac_make}_set=no
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in mkdir gmkdir; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
++ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
++ 'mkdir (GNU coreutils) '* | \
++ 'mkdir (coreutils) '* | \
++ 'mkdir (fileutils) '4.1*)
++ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
++ break 3;;
++ esac
++ done
++ done
++done
++IFS=$as_save_IFS
++
+ fi
+-rm -f conftestmake
++
++ if test "${ac_cv_path_mkdir+set}" = set; then
++ MKDIR_P="$ac_cv_path_mkdir -p"
++ else
++ # As a last resort, use the slow shell script. Don't cache a
++ # value for MKDIR_P within a source directory, because that will
++ # break other packages using the cache if that directory is
++ # removed, or if the value is a relative name.
++ test -d ./--version && rmdir ./--version
++ MKDIR_P="$ac_install_sh -d"
++ fi
+ fi
+-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
++$as_echo "$MKDIR_P" >&6; }
++
++mkdir_p="$MKDIR_P"
++case $mkdir_p in
++ [\\/$]* | ?:[\\/]*) ;;
++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
++esac
++
++for ac_prog in gawk mawk nawk awk
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_AWK+set}" = set; then
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$AWK"; then
++ ac_cv_prog_AWK="$AWK" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_AWK="$ac_prog"
++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++IFS=$as_save_IFS
++
++fi
++fi
++AWK=$ac_cv_prog_AWK
++if test -n "$AWK"; then
++ { $as_echo "$as_me:$LINENO: result: $AWK" >&5
++$as_echo "$AWK" >&6; }
++else
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++ test -n "$AWK" && break
++done
++
++{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
++$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
++set x ${MAKE-make}
++ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
++ $as_echo_n "(cached) " >&6
++else
++ cat >conftest.make <<\_ACEOF
++SHELL = /bin/sh
++all:
++ @echo '@@@%%%=$(MAKE)=@@@%%%'
++_ACEOF
++# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
++case `${MAKE-make} -f conftest.make 2>/dev/null` in
++ *@@@%%%=?*=@@@%%%*)
++ eval ac_cv_prog_make_${ac_make}_set=yes;;
++ *)
++ eval ac_cv_prog_make_${ac_make}_set=no;;
++esac
++rm -f conftest.make
++fi
++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
++ { $as_echo "$as_me:$LINENO: result: yes" >&5
++$as_echo "yes" >&6; }
+ SET_MAKE=
+ else
+- echo "$ac_t""no" 1>&6
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+ fi
+
++rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
++else
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
+
+-PACKAGE=eCos
+-
+-VERSION=2.0
++if test "`cd $srcdir && pwd`" != "`pwd`"; then
++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
++ # is not polluted with repeated "-I."
++ am__isrc=' -I$(srcdir)'
++ # test to see if srcdir already configured
++ if test -f $srcdir/config.status; then
++ { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
++$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
++ { (exit 1); exit 1; }; }
++ fi
++fi
+
+-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
+ fi
+
+
++# Define the identity of the package.
++ PACKAGE=eCos
++ VERSION=2.0
+
+-missing_dir=`cd $ac_aux_dir && pwd`
+-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+-echo "configure:735: checking for working aclocal" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+- ACLOCAL=aclocal
+- echo "$ac_t""found" 1>&6
++
++# Some tools Automake needs.
++
++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
++
++
++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
++
++
++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
++
++
++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
++
++
++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
++
++install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
++
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++if test "$cross_compiling" != no; then
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++set dummy ${ac_tool_prefix}strip; ac_word=$2
++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_STRIP+set}" = set; then
++ $as_echo_n "(cached) " >&6
+ else
+- ACLOCAL="$missing_dir/missing aclocal"
+- echo "$ac_t""missing" 1>&6
+-fi
++ if test -n "$STRIP"; then
++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++IFS=$as_save_IFS
+
+-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+-echo "configure:748: checking for working autoconf" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+- AUTOCONF=autoconf
+- echo "$ac_t""found" 1>&6
++fi
++fi
++STRIP=$ac_cv_prog_STRIP
++if test -n "$STRIP"; then
++ { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
++$as_echo "$STRIP" >&6; }
+ else
+- AUTOCONF="$missing_dir/missing autoconf"
+- echo "$ac_t""missing" 1>&6
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+-echo $ac_n "checking for working automake""... $ac_c" 1>&6
+-echo "configure:761: checking for working automake" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (automake --version) < /dev/null > /dev/null 2>&1; then
+- AUTOMAKE=automake
+- echo "$ac_t""found" 1>&6
+-else
+- AUTOMAKE="$missing_dir/missing automake"
+- echo "$ac_t""missing" 1>&6
++
+ fi
++if test -z "$ac_cv_prog_STRIP"; then
++ ac_ct_STRIP=$STRIP
++ # Extract the first word of "strip", so it can be a program name with args.
++set dummy strip; ac_word=$2
++{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_STRIP"; then
++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_STRIP="strip"
++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++IFS=$as_save_IFS
+
+-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+-echo "configure:774: checking for working autoheader" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+- AUTOHEADER=autoheader
+- echo "$ac_t""found" 1>&6
++fi
++fi
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++ { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
++$as_echo "$ac_ct_STRIP" >&6; }
+ else
+- AUTOHEADER="$missing_dir/missing autoheader"
+- echo "$ac_t""missing" 1>&6
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
+ fi
+
+-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+-echo "configure:787: checking for working makeinfo" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+- MAKEINFO=makeinfo
+- echo "$ac_t""found" 1>&6
++ if test "x$ac_ct_STRIP" = x; then
++ STRIP=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ STRIP=$ac_ct_STRIP
++ fi
+ else
+- MAKEINFO="$missing_dir/missing makeinfo"
+- echo "$ac_t""missing" 1>&6
++ STRIP="$ac_cv_prog_STRIP"
+ fi
+
++fi
++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+-echo "configure:801: checking whether to enable maintainer-specific portions of Makefiles" >&5
+- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
++# Always define AMTAR for backward compatibility.
++
++AMTAR=${AMTAR-"${am_missing_run}tar"}
++
++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
++
++
++
++
++
++{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
++$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
++ # Check whether --enable-maintainer-mode was given.
+ if test "${enable_maintainer_mode+set}" = set; then
+- enableval="$enable_maintainer_mode"
+- USE_MAINTAINER_MODE=$enableval
++ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+ else
+ USE_MAINTAINER_MODE=no
+ fi
+
+- echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+-
+-
+-if test $USE_MAINTAINER_MODE = yes; then
++ { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
++$as_echo "$USE_MAINTAINER_MODE" >&6; }
++ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+ else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+ fi
++
+ MAINT=$MAINTAINER_MODE_TRUE
+-
+
+
+- echo $ac_n "checking that a separate build tree is being used""... $ac_c" 1>&6
+-echo "configure:825: checking that a separate build tree is being used" >&5
++
++ { $as_echo "$as_me:$LINENO: checking that a separate build tree is being used" >&5
++$as_echo_n "checking that a separate build tree is being used... " >&6; }
+ ecos_cwd=`/bin/pwd`
+ if test "${srcdir}" = "." ; then
+ srcdir=${ecos_cwd}
+ fi
+ if test "${ecos_cwd}" = "${srcdir}" ; then
+- echo "$ac_t""no" 1>&6
+- { echo "configure: error: This configure script should not be run inside the source tree. Instead please use a separate build tree" 1>&2; exit 1; }
++ { $as_echo "$as_me:$LINENO: result: no" >&5
++$as_echo "no" >&6; }
++ { { $as_echo "$as_me:$LINENO: error: This configure script should not be run inside the source tree. Instead please use a separate build tree" >&5
++$as_echo "$as_me: error: This configure script should not be run inside the source tree. Instead please use a separate build tree" >&2;}
++ { (exit 1); exit 1; }; }
+ else
+- echo "$ac_t""yes" 1>&6
++ { $as_echo "$as_me:$LINENO: result: yes" >&5
++$as_echo "yes" >&6; }
+ fi
+
+
+ SUBDIRS="infra libcdl tools/configtool/standalone/common"
+
++ac_config_commands="$ac_config_commands default-1"
+
+
+
+-subdirs="${SUBDIRS}"
+
+-trap '' 1 2 15
+-cat > confcache <<\EOF
++
++subdirs="$subdirs ${SUBDIRS}"
++
++ac_config_files="$ac_config_files Makefile"
++
++cat >confcache <<\_ACEOF
+ # This file is a shell script that caches the results of configure
+ # tests run on this system so they can be shared between configure
+-# scripts and configure runs. It is not useful on other systems.
+-# If it contains results you don't want to keep, you may remove or edit it.
++# scripts and configure runs, see configure's option --config-cache.
++# It is not useful on other systems. If it contains results you don't
++# want to keep, you may remove or edit it.
+ #
+-# By default, configure uses ./config.cache as the cache file,
+-# creating it if it does not exist already. You can give configure
+-# the --cache-file=FILE option to use a different cache file; that is
+-# what configure does when it calls configure scripts in
+-# subdirectories, so they share the cache.
+-# Giving --cache-file=/dev/null disables caching, for debugging configure.
+-# config.status only pays attention to the cache file if you give it the
+-# --recheck option to rerun configure.
++# config.status only pays attention to the cache file if you give it
++# the --recheck option to rerun configure.
+ #
+-EOF
++# `ac_cv_env_foo' variables (set or unset) will be overridden when
++# loading this file, other *unset* `ac_cv_foo' will be assigned the
++# following values.
++
++_ACEOF
++
+ # The following way of writing the cache mishandles newlines in values,
+ # but we know of no workaround that is simple, portable, and efficient.
+-# So, don't put newlines in cache variables' values.
++# So, we kill variables containing newlines.
+ # Ultrix sh set writes to stderr and can't be redirected directly,
+ # and sets the high bit in the cache file unless we assign to the vars.
+-(set) 2>&1 |
+- case `(ac_space=' '; set | grep ac_space) 2>&1` in
+- *ac_space=\ *)
+- # `set' does not quote correctly, so add quotes (double-quote substitution
+- # turns \\\\ into \\, and sed turns \\ into \).
+- sed -n \
+- -e "s/'/'\\\\''/g" \
+- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+- ;;
+- *)
+- # `set' quotes correctly as required by POSIX, so do not add quotes.
+- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+- ;;
+- esac >> confcache
+-if cmp -s $cache_file confcache; then
+- :
+-else
+- if test -w $cache_file; then
+- echo "updating cache $cache_file"
+- cat confcache > $cache_file
++(
++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
++ eval ac_val=\$$ac_var
++ case $ac_val in #(
++ *${as_nl}*)
++ case $ac_var in #(
++ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
++ esac
++ case $ac_var in #(
++ _ | IFS | as_nl) ;; #(
++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
++ *) $as_unset $ac_var ;;
++ esac ;;
++ esac
++ done
++
++ (set) 2>&1 |
++ case $as_nl`(ac_space=' '; set) 2>&1` in #(
++ *${as_nl}ac_space=\ *)
++ # `set' does not quote correctly, so add quotes (double-quote
++ # substitution turns \\\\ into \\, and sed turns \\ into \).
++ sed -n \
++ "s/'/'\\\\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
++ ;; #(
++ *)
++ # `set' quotes correctly as required by POSIX, so do not add quotes.
++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
++ ;;
++ esac |
++ sort
++) |
++ sed '
++ /^ac_cv_env_/b end
++ t clear
++ :clear
++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
++ t end
++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
++ :end' >>confcache
++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
++ if test -w "$cache_file"; then
++ test "x$cache_file" != "x/dev/null" &&
++ { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
++$as_echo "$as_me: updating cache $cache_file" >&6;}
++ cat confcache >$cache_file
+ else
+- echo "not updating unwritable cache $cache_file"
++ { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
++$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+ fi
+ rm -f confcache
+
+-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+-
+ test "x$prefix" = xNONE && prefix=$ac_default_prefix
+ # Let make expand exec_prefix.
+ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+-# Any assignment to VPATH causes Sun make to only execute
+-# the first set of double-colon rules, so remove it if not needed.
+-# If there is a colon in the path, we need to keep it.
+-if test "x$srcdir" = x.; then
+- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+-fi
+-
+-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+-
+ # Transform confdefs.h into DEFS.
+ # Protect against shell expansion while executing Makefile rules.
+ # Protect against Makefile macro expansion.
+-cat > conftest.defs <<\EOF
+-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+-s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+-s%\[%\\&%g
+-s%\]%\\&%g
+-s%\$%$$%g
+-EOF
+-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+-rm -f conftest.defs
++#
++# If the first sed substitution is executed (which looks for macros that
++# take arguments), then branch to the quote section. Otherwise,
++# look for a macro that doesn't take arguments.
++ac_script='
++:mline
++/\\$/{
++ N
++ s,\\\n,,
++ b mline
++}
++t clear
++:clear
++s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
++t quote
++s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
++t quote
++b any
++:quote
++s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
++s/\[/\\&/g
++s/\]/\\&/g
++s/\$/$$/g
++H
++:any
++${
++ g
++ s/^\n//
++ s/\n/ /g
++ p
++}
++'
++DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+-# Without the "./", some shells look in PATH for config.status.
+-: ${CONFIG_STATUS=./config.status}
++ac_libobjs=
++ac_ltlibobjs=
++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
++ # 1. Remove the extension, and $U if already installed.
++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
++ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
++ # will be set to the directory where LIBOBJS objects are built.
++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
++done
++LIBOBJS=$ac_libobjs
+
+-echo creating $CONFIG_STATUS
+-rm -f $CONFIG_STATUS
+-cat > $CONFIG_STATUS <&5
++$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++ { (exit 1); exit 1; }; }
++fi
++
++: ${CONFIG_STATUS=./config.status}
++ac_write_fail=0
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files $CONFIG_STATUS"
++{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
++$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
++cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++#! $SHELL
++# Generated by $as_me.
+ # Run this file to recreate the current configuration.
+-# This directory was configured as follows,
+-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+-#
+-# $0 $ac_configure_args
+-#
+ # Compiler output produced by configure, useful for debugging
+-# configure, is in ./config.log if it exists.
++# configure, is in config.log if it exists.
+
+-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+-for ac_option
++debug=false
++ac_cs_recheck=false
++ac_cs_silent=false
++SHELL=\${CONFIG_SHELL-$SHELL}
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++## --------------------- ##
++## M4sh Initialization. ##
++## --------------------- ##
++
++# Be more Bourne compatible
++DUALCASE=1; export DUALCASE # for MKS sh
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++ setopt NO_GLOB_SUBST
++else
++ case `(set -o) 2>/dev/null` in
++ *posix*) set -o posix ;;
++esac
++
++fi
++
++
++
++
++# PATH needs CR
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++as_nl='
++'
++export as_nl
++# Printing a long string crashes Solaris 7 /usr/bin/printf.
++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
++if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
++ as_echo='printf %s\n'
++ as_echo_n='printf %s'
++else
++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
++ as_echo_n='/usr/ucb/echo -n'
++ else
++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
++ as_echo_n_body='eval
++ arg=$1;
++ case $arg in
++ *"$as_nl"*)
++ expr "X$arg" : "X\\(.*\\)$as_nl";
++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
++ esac;
++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
++ '
++ export as_echo_n_body
++ as_echo_n='sh -c $as_echo_n_body as_echo'
++ fi
++ export as_echo_body
++ as_echo='sh -c $as_echo_body as_echo'
++fi
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
++ PATH_SEPARATOR=';'
++ }
++fi
++
++# Support unset when possible.
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++ as_unset=unset
++else
++ as_unset=false
++fi
++
++
++# IFS
++# We need space, tab and new line, in precisely that order. Quoting is
++# there to prevent editors from complaining about space-tab.
++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
++# splitting by setting IFS to empty value.)
++IFS=" "" $as_nl"
++
++# Find who we are. Look in the path if we contain no directory separator.
++case $0 in
++ *[\\/]* ) as_myself=$0 ;;
++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
+ do
+- case "\$ac_option" in
+- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+- echo "$CONFIG_STATUS generated by autoconf version 2.13"
+- exit 0 ;;
+- -help | --help | --hel | --he | --h)
+- echo "\$ac_cs_usage"; exit 0 ;;
+- *) echo "\$ac_cs_usage"; exit 1 ;;
+- esac
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
++IFS=$as_save_IFS
+
+-ac_given_srcdir=$srcdir
+-ac_given_INSTALL="$INSTALL"
++ ;;
++esac
++# We did not find ourselves, most probably we were run as `sh COMMAND'
++# in which case we are not to be found in the path.
++if test "x$as_myself" = x; then
++ as_myself=$0
++fi
++if test ! -f "$as_myself"; then
++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
++ { (exit 1); exit 1; }
++fi
+
+-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+-EOF
+-cat >> $CONFIG_STATUS </dev/null 2>&1 && $as_unset $as_var
++done
++PS1='$ '
++PS2='> '
++PS4='+ '
+
+-# Protect against being on the right side of a sed subst in config.status.
+-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+-$ac_vpsub
+-$extrasub
+-s%@SHELL@%$SHELL%g
+-s%@CFLAGS@%$CFLAGS%g
+-s%@CPPFLAGS@%$CPPFLAGS%g
+-s%@CXXFLAGS@%$CXXFLAGS%g
+-s%@FFLAGS@%$FFLAGS%g
+-s%@DEFS@%$DEFS%g
+-s%@LDFLAGS@%$LDFLAGS%g
+-s%@LIBS@%$LIBS%g
+-s%@exec_prefix@%$exec_prefix%g
+-s%@prefix@%$prefix%g
+-s%@program_transform_name@%$program_transform_name%g
+-s%@bindir@%$bindir%g
+-s%@sbindir@%$sbindir%g
+-s%@libexecdir@%$libexecdir%g
+-s%@datadir@%$datadir%g
+-s%@sysconfdir@%$sysconfdir%g
+-s%@sharedstatedir@%$sharedstatedir%g
+-s%@localstatedir@%$localstatedir%g
+-s%@libdir@%$libdir%g
+-s%@includedir@%$includedir%g
+-s%@oldincludedir@%$oldincludedir%g
+-s%@infodir@%$infodir%g
+-s%@mandir@%$mandir%g
+-s%@host@%$host%g
+-s%@host_alias@%$host_alias%g
+-s%@host_cpu@%$host_cpu%g
+-s%@host_vendor@%$host_vendor%g
+-s%@host_os@%$host_os%g
+-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+-s%@INSTALL_DATA@%$INSTALL_DATA%g
+-s%@PACKAGE@%$PACKAGE%g
+-s%@VERSION@%$VERSION%g
+-s%@ACLOCAL@%$ACLOCAL%g
+-s%@AUTOCONF@%$AUTOCONF%g
+-s%@AUTOMAKE@%$AUTOMAKE%g
+-s%@AUTOHEADER@%$AUTOHEADER%g
+-s%@MAKEINFO@%$MAKEINFO%g
+-s%@SET_MAKE@%$SET_MAKE%g
+-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
+-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
+-s%@MAINT@%$MAINT%g
+-s%@SUBDIRS@%$SUBDIRS%g
+-s%@subdirs@%$subdirs%g
++# NLS nuisances.
++LC_ALL=C
++export LC_ALL
++LANGUAGE=C
++export LANGUAGE
+
+-CEOF
+-EOF
++# Required to use basename.
++if expr a : '\(a\)' >/dev/null 2>&1 &&
++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
++ as_expr=expr
++else
++ as_expr=false
++fi
+
+-cat >> $CONFIG_STATUS <<\EOF
++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
+
+-# Split the substitutions into bite-sized pieces for seds with
+-# small command number limits, like on Digital OSF/1 and HP-UX.
+-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+-ac_file=1 # Number of current file.
+-ac_beg=1 # First line for current file.
+-ac_end=$ac_max_sed_cmds # Line after last line for current file.
+-ac_more_lines=:
+-ac_sed_cmds=""
+-while $ac_more_lines; do
+- if test $ac_beg -gt 1; then
+- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
++
++# Name of the executable.
++as_me=`$as_basename -- "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++
++# CDPATH.
++$as_unset CDPATH
++
++
++
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
++
++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
++ # uniformly replaced by the line number. The first 'sed' inserts a
++ # line-number line after each line using $LINENO; the second 'sed'
++ # does the real work. The second script uses 'N' to pair each
++ # line-number line with the line containing $LINENO, and appends
++ # trailing '-' during substitution so that $LINENO is not a special
++ # case at line end.
++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
++ # scripts with optimization help from Paolo Bonzini. Blame Lee
++ # E. McMahon (1931-1989) for sed's syntax. :-)
++ sed -n '
++ p
++ /[$]LINENO/=
++ ' <$as_myself |
++ sed '
++ s/[$]LINENO.*/&-/
++ t lineno
++ b
++ :lineno
++ N
++ :loop
++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
++ t loop
++ s/-\n.*//
++ ' >$as_me.lineno &&
++ chmod +x "$as_me.lineno" ||
++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
++ { (exit 1); exit 1; }; }
++
++ # Don't try to exec as it changes $[0], causing all sort of problems
++ # (the dirname of $[0] is not the place where we might find the
++ # original and so on. Autoconf is especially sensitive to this).
++ . "./$as_me.lineno"
++ # Exit status is that of the last command.
++ exit
++}
++
++
++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
++ as_dirname=dirname
++else
++ as_dirname=false
++fi
++
++ECHO_C= ECHO_N= ECHO_T=
++case `echo -n x` in
++-n*)
++ case `echo 'x\c'` in
++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
++ *) ECHO_C='\c';;
++ esac;;
++*)
++ ECHO_N='-n';;
++esac
++if expr a : '\(a\)' >/dev/null 2>&1 &&
++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++rm -f conf$$ conf$$.exe conf$$.file
++if test -d conf$$.dir; then
++ rm -f conf$$.dir/conf$$.file
++else
++ rm -f conf$$.dir
++ mkdir conf$$.dir 2>/dev/null
++fi
++if (echo >conf$$.file) 2>/dev/null; then
++ if ln -s conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s='ln -s'
++ # ... but there are two gotchas:
++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++ # In both cases, we have to default to `cp -p'.
++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++ as_ln_s='cp -p'
++ elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
+ else
+- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
++ as_ln_s='cp -p'
+ fi
+- if test ! -s conftest.s$ac_file; then
+- ac_more_lines=false
+- rm -f conftest.s$ac_file
++else
++ as_ln_s='cp -p'
++fi
++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
++rmdir conf$$.dir 2>/dev/null
++
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p=:
++else
++ test -d ./-p && rmdir ./-p
++ as_mkdir_p=false
++fi
++
++if test -x / >/dev/null 2>&1; then
++ as_test_x='test -x'
++else
++ if ls -dL / >/dev/null 2>&1; then
++ as_ls_L_option=L
+ else
+- if test -z "$ac_sed_cmds"; then
+- ac_sed_cmds="sed -f conftest.s$ac_file"
+- else
+- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+- fi
+- ac_file=`expr $ac_file + 1`
+- ac_beg=$ac_end
+- ac_end=`expr $ac_end + $ac_max_sed_cmds`
++ as_ls_L_option=
+ fi
++ as_test_x='
++ eval sh -c '\''
++ if test -d "$1"; then
++ test -d "$1/.";
++ else
++ case $1 in
++ -*)set "./$1";;
++ esac;
++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
++ ???[sx]*):;;*)false;;esac;fi
++ '\'' sh
++ '
++fi
++as_executable_p=$as_test_x
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
++
++
++exec 6>&1
++
++# Save the log message, to keep $[0] and so on meaningful, and to
++# report actual input values of CONFIG_FILES etc. instead of their
++# values after options handling.
++ac_log="
++This file was extended by $as_me, which was
++generated by GNU Autoconf 2.63. Invocation command line was
++
++ CONFIG_FILES = $CONFIG_FILES
++ CONFIG_HEADERS = $CONFIG_HEADERS
++ CONFIG_LINKS = $CONFIG_LINKS
++ CONFIG_COMMANDS = $CONFIG_COMMANDS
++ $ $0 $@
++
++on `(hostname || uname -n) 2>/dev/null | sed 1q`
++"
++
++_ACEOF
++
++case $ac_config_files in *"
++"*) set x $ac_config_files; shift; ac_config_files=$*;;
++esac
++
++
++
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++# Files that config.status was made for.
++config_files="$ac_config_files"
++config_commands="$ac_config_commands"
++
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++ac_cs_usage="\
++\`$as_me' instantiates files from templates according to the
++current configuration.
++
++Usage: $0 [OPTION]... [FILE]...
++
++ -h, --help print this help, then exit
++ -V, --version print version number and configuration settings, then exit
++ -q, --quiet, --silent
++ do not print progress messages
++ -d, --debug don't remove temporary files
++ --recheck update $as_me by reconfiguring in the same conditions
++ --file=FILE[:TEMPLATE]
++ instantiate the configuration file FILE
++
++Configuration files:
++$config_files
++
++Configuration commands:
++$config_commands
++
++Report bugs to ."
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ac_cs_version="\\
++config.status
++configured by $0, generated by GNU Autoconf 2.63,
++ with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
++
++Copyright (C) 2008 Free Software Foundation, Inc.
++This config.status script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it."
++
++ac_pwd='$ac_pwd'
++srcdir='$srcdir'
++INSTALL='$INSTALL'
++MKDIR_P='$MKDIR_P'
++AWK='$AWK'
++test -n "\$AWK" || AWK=awk
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++# The default lists apply if the user does not specify any file.
++ac_need_defaults=:
++while test $# != 0
++do
++ case $1 in
++ --*=*)
++ ac_option=`expr "X$1" : 'X\([^=]*\)='`
++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
++ ac_shift=:
++ ;;
++ *)
++ ac_option=$1
++ ac_optarg=$2
++ ac_shift=shift
++ ;;
++ esac
++
++ case $ac_option in
++ # Handling of the options.
++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
++ ac_cs_recheck=: ;;
++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
++ $as_echo "$ac_cs_version"; exit ;;
++ --debug | --debu | --deb | --de | --d | -d )
++ debug=: ;;
++ --file | --fil | --fi | --f )
++ $ac_shift
++ case $ac_optarg in
++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
++ ac_need_defaults=false;;
++ --he | --h | --help | --hel | -h )
++ $as_echo "$ac_cs_usage"; exit ;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil | --si | --s)
++ ac_cs_silent=: ;;
++
++ # This is an error.
++ -*) { $as_echo "$as_me: error: unrecognized option: $1
++Try \`$0 --help' for more information." >&2
++ { (exit 1); exit 1; }; } ;;
++
++ *) ac_config_targets="$ac_config_targets $1"
++ ac_need_defaults=false ;;
++
++ esac
++ shift
+ done
+-if test -z "$ac_sed_cmds"; then
+- ac_sed_cmds=cat
++
++ac_configure_extra_args=
++
++if $ac_cs_silent; then
++ exec 6>/dev/null
++ ac_configure_extra_args="$ac_configure_extra_args --silent"
+ fi
+-EOF
+
+-cat >> $CONFIG_STATUS <>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++if \$ac_cs_recheck; then
++ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
++ shift
++ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
++ CONFIG_SHELL='$SHELL'
++ export CONFIG_SHELL
++ exec "\$@"
++fi
+
+-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+-EOF
+-cat >> $CONFIG_STATUS <<\EOF
+-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+- case "$ac_file" in
+- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+- *) ac_file_in="${ac_file}.in" ;;
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++exec 5>>config.log
++{
++ echo
++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
++## Running $as_me. ##
++_ASBOX
++ $as_echo "$ac_log"
++} >&5
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++#
++# INIT-COMMANDS
++#
++
++
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++
++# Handling of arguments.
++for ac_config_target in $ac_config_targets
++do
++ case $ac_config_target in
++ "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
++
++ *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
++$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
++ { (exit 1); exit 1; }; };;
+ esac
++done
+
+- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+- # Remove last slash and all that follows it. Not all systems have dirname.
+- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+- # The file is in a subdirectory.
+- test ! -d "$ac_dir" && mkdir "$ac_dir"
+- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+- # A "../" for each directory in $ac_dir_suffix.
+- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
++# If the user did not use the arguments to specify the items to instantiate,
++# then the envvar interface is used. Set only those that are not.
++# We use the long form for the default assignment because of an extremely
++# bizarre bug on SunOS 4.1.3.
++if $ac_need_defaults; then
++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
++fi
++
++# Have a temporary directory for convenience. Make it in the build tree
++# simply because there is no reason against having it here, and in addition,
++# creating and moving files from /tmp can sometimes cause problems.
++# Hook for its removal unless debugging.
++# Note that there is a small window in which the directory will not be cleaned:
++# after its creation but before its name has been assigned to `$tmp'.
++$debug ||
++{
++ tmp=
++ trap 'exit_status=$?
++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
++' 0
++ trap '{ (exit 1); exit 1; }' 1 2 13 15
++}
++# Create a (secure) tmp directory for tmp files.
++
++{
++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
++ test -n "$tmp" && test -d "$tmp"
++} ||
++{
++ tmp=./conf$$-$RANDOM
++ (umask 077 && mkdir "$tmp")
++} ||
++{
++ $as_echo "$as_me: cannot create a temporary directory in ." >&2
++ { (exit 1); exit 1; }
++}
++
++# Set up the scripts for CONFIG_FILES section.
++# No need to generate them if there are no CONFIG_FILES.
++# This happens for instance with `./config.status config.h'.
++if test -n "$CONFIG_FILES"; then
++
++
++ac_cr='
'
++ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null`
++if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
++ ac_cs_awk_cr='\\r'
++else
++ ac_cs_awk_cr=$ac_cr
++fi
++
++echo 'BEGIN {' >"$tmp/subs1.awk" &&
++_ACEOF
++
++
++{
++ echo "cat >conf$$subs.awk <<_ACEOF" &&
++ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
++ echo "_ACEOF"
++} >conf$$subs.sh ||
++ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
++$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
++ { (exit 1); exit 1; }; }
++ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
++ac_delim='%!_!# '
++for ac_last_try in false false false false false :; do
++ . ./conf$$subs.sh ||
++ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
++$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
++ { (exit 1); exit 1; }; }
++
++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
++ if test $ac_delim_n = $ac_delim_num; then
++ break
++ elif $ac_last_try; then
++ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
++$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
++ { (exit 1); exit 1; }; }
+ else
+- ac_dir_suffix= ac_dots=
++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
++done
++rm -f conf$$subs.sh
+
+- case "$ac_given_srcdir" in
+- .) srcdir=.
+- if test -z "$ac_dots"; then top_srcdir=.
+- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+- *) # Relative path.
+- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+- top_srcdir="$ac_dots$ac_given_srcdir" ;;
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
++_ACEOF
++sed -n '
++h
++s/^/S["/; s/!.*/"]=/
++p
++g
++s/^[^!]*!//
++:repl
++t repl
++s/'"$ac_delim"'$//
++t delim
++:nl
++h
++s/\(.\{148\}\).*/\1/
++t more1
++s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
++p
++n
++b repl
++:more1
++s/["\\]/\\&/g; s/^/"/; s/$/"\\/
++p
++g
++s/.\{148\}//
++t nl
++:delim
++h
++s/\(.\{148\}\).*/\1/
++t more2
++s/["\\]/\\&/g; s/^/"/; s/$/"/
++p
++b
++:more2
++s/["\\]/\\&/g; s/^/"/; s/$/"\\/
++p
++g
++s/.\{148\}//
++t delim
++' >$CONFIG_STATUS || ac_write_fail=1
++rm -f conf$$subs.awk
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++_ACAWK
++cat >>"\$tmp/subs1.awk" <<_ACAWK &&
++ for (key in S) S_is_set[key] = 1
++ FS = ""
++
++}
++{
++ line = $ 0
++ nfields = split(line, field, "@")
++ substed = 0
++ len = length(field[1])
++ for (i = 2; i < nfields; i++) {
++ key = field[i]
++ keylen = length(key)
++ if (S_is_set[key]) {
++ value = S[key]
++ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
++ len += length(value) + length(field[++i])
++ substed = 1
++ } else
++ len += 1 + keylen
++ }
++
++ print line
++}
++
++_ACAWK
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
++ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
++else
++ cat
++fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
++ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
++$as_echo "$as_me: error: could not setup config files machinery" >&2;}
++ { (exit 1); exit 1; }; }
++_ACEOF
++
++# VPATH may cause trouble with some makes, so we remove $(srcdir),
++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
++# trailing colons and then remove the whole line if VPATH becomes empty
++# (actually we leave an empty line to preserve line numbers).
++if test "x$srcdir" = x.; then
++ ac_vpsub='/^[ ]*VPATH[ ]*=/{
++s/:*\$(srcdir):*/:/
++s/:*\${srcdir}:*/:/
++s/:*@srcdir@:*/:/
++s/^\([^=]*=[ ]*\):*/\1/
++s/:*$//
++s/^[^=]*=[ ]*$//
++}'
++fi
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++fi # test -n "$CONFIG_FILES"
++
++
++eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS"
++shift
++for ac_tag
++do
++ case $ac_tag in
++ :[FHLC]) ac_mode=$ac_tag; continue;;
++ esac
++ case $ac_mode$ac_tag in
++ :[FHL]*:*);;
++ :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
++$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
++ { (exit 1); exit 1; }; };;
++ :[FH]-) ac_tag=-:-;;
++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
++ ac_save_IFS=$IFS
++ IFS=:
++ set x $ac_tag
++ IFS=$ac_save_IFS
++ shift
++ ac_file=$1
++ shift
+
+- case "$ac_given_INSTALL" in
+- [/$]*) INSTALL="$ac_given_INSTALL" ;;
+- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
++ case $ac_mode in
++ :L) ac_source=$1;;
++ :[FH])
++ ac_file_inputs=
++ for ac_f
++ do
++ case $ac_f in
++ -) ac_f="$tmp/stdin";;
++ *) # Look for the file first in the build tree, then in the source tree
++ # (if the path is not absolute). The absolute path cannot be DOS-style,
++ # because $ac_f cannot contain `:'.
++ test -f "$ac_f" ||
++ case $ac_f in
++ [\\/$]*) false;;
++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
++ esac ||
++ { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
++$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
++ { (exit 1); exit 1; }; };;
++ esac
++ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
++ ac_file_inputs="$ac_file_inputs '$ac_f'"
++ done
++
++ # Let's still pretend it is `configure' which instantiates (i.e., don't
++ # use $as_me), people would be surprised to read:
++ # /* config.h. Generated by config.status. */
++ configure_input='Generated from '`
++ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
++ `' by configure.'
++ if test x"$ac_file" != x-; then
++ configure_input="$ac_file. $configure_input"
++ { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
++$as_echo "$as_me: creating $ac_file" >&6;}
++ fi
++ # Neutralize special characters interpreted by sed in replacement strings.
++ case $configure_input in #(
++ *\&* | *\|* | *\\* )
++ ac_sed_conf_input=`$as_echo "$configure_input" |
++ sed 's/[\\\\&|]/\\\\&/g'`;; #(
++ *) ac_sed_conf_input=$configure_input;;
++ esac
++
++ case $ac_tag in
++ *:-:* | *:-) cat >"$tmp/stdin" \
++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
++$as_echo "$as_me: error: could not create $ac_file" >&2;}
++ { (exit 1); exit 1; }; } ;;
++ esac
++ ;;
+ esac
+
+- echo creating "$ac_file"
+- rm -f "$ac_file"
+- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+- case "$ac_file" in
+- *Makefile*) ac_comsub="1i\\
+-# $configure_input" ;;
+- *) ac_comsub= ;;
++ ac_dir=`$as_dirname -- "$ac_file" ||
++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$ac_file" : 'X\(//\)[^/]' \| \
++ X"$ac_file" : 'X\(//\)$' \| \
++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$ac_file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ { as_dir="$ac_dir"
++ case $as_dir in #(
++ -*) as_dir=./$as_dir;;
+ esac
++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
++ as_dirs=
++ while :; do
++ case $as_dir in #(
++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
++ *) as_qdir=$as_dir;;
++ esac
++ as_dirs="'$as_qdir' $as_dirs"
++ as_dir=`$as_dirname -- "$as_dir" ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ test -d "$as_dir" && break
++ done
++ test -z "$as_dirs" || eval "mkdir $as_dirs"
++ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
++$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
++ { (exit 1); exit 1; }; }; }
++ ac_builddir=.
+
+- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+- sed -e "$ac_comsub
+-s%@configure_input@%$configure_input%g
+-s%@srcdir@%$srcdir%g
+-s%@top_srcdir@%$top_srcdir%g
+-s%@INSTALL@%$INSTALL%g
+-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+-fi; done
+-rm -f conftest.s*
++case "$ac_dir" in
++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
++*)
++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
++ # A ".." for each directory in $ac_dir_suffix.
++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
++ case $ac_top_builddir_sub in
++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
++ esac ;;
++esac
++ac_abs_top_builddir=$ac_pwd
++ac_abs_builddir=$ac_pwd$ac_dir_suffix
++# for backward compatibility:
++ac_top_builddir=$ac_top_build_prefix
+
+-EOF
+-cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF
++ case $ac_mode in
++ :F)
++ #
++ # CONFIG_FILE
++ #
+
++ case $INSTALL in
++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
++ esac
++ ac_MKDIR_P=$MKDIR_P
++ case $MKDIR_P in
++ [\\/$]* | ?:[\\/]* ) ;;
++ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
++ esac
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++# If the template does not know about datarootdir, expand it.
++# FIXME: This hack should be removed a few years after 2.60.
++ac_datarootdir_hack=; ac_datarootdir_seen=
++
++ac_sed_dataroot='
++/datarootdir/ {
++ p
++ q
++}
++/@datadir@/p
++/@docdir@/p
++/@infodir@/p
++/@localedir@/p
++/@mandir@/p
++'
++case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
++*datarootdir*) ac_datarootdir_seen=yes;;
++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
++ { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
++$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ ac_datarootdir_hack='
++ s&@datadir@&$datadir&g
++ s&@docdir@&$docdir&g
++ s&@infodir@&$infodir&g
++ s&@localedir@&$localedir&g
++ s&@mandir@&$mandir&g
++ s&\\\${datarootdir}&$datarootdir&g' ;;
++esac
++_ACEOF
++
++# Neutralize VPATH when `$srcdir' = `.'.
++# Shell code in configure.ac might set extrasub.
++# FIXME: do we really want to maintain this feature?
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ac_sed_extra="$ac_vpsub
++$extrasub
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++:t
++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
++s|@configure_input@|$ac_sed_conf_input|;t t
++s&@top_builddir@&$ac_top_builddir_sub&;t t
++s&@top_build_prefix@&$ac_top_build_prefix&;t t
++s&@srcdir@&$ac_srcdir&;t t
++s&@abs_srcdir@&$ac_abs_srcdir&;t t
++s&@top_srcdir@&$ac_top_srcdir&;t t
++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
++s&@builddir@&$ac_builddir&;t t
++s&@abs_builddir@&$ac_abs_builddir&;t t
++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
++s&@INSTALL@&$ac_INSTALL&;t t
++s&@MKDIR_P@&$ac_MKDIR_P&;t t
++$ac_datarootdir_hack
++"
++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
++$as_echo "$as_me: error: could not create $ac_file" >&2;}
++ { (exit 1); exit 1; }; }
++
++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
++ { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++which seems to be undefined. Please make sure it is defined." >&5
++$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++which seems to be undefined. Please make sure it is defined." >&2;}
++
++ rm -f "$tmp/stdin"
++ case $ac_file in
++ -) cat "$tmp/out" && rm -f "$tmp/out";;
++ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
++ esac \
++ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
++$as_echo "$as_me: error: could not create $ac_file" >&2;}
++ { (exit 1); exit 1; }; }
++ ;;
++
++
++ :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
++$as_echo "$as_me: executing $ac_file commands" >&6;}
++ ;;
++ esac
++
++
++ case $ac_file$ac_mode in
++ "default-1":C)
+ test -d tools || mkdir tools
+ test -d tools/configtool || mkdir tools/configtool
+ test -d tools/configtool/standalone || mkdir tools/configtool/standalone
+ test -d tools/configtool/standalone/common || mkdir tools/configtool/standalone/common
++ ;;
++
++ esac
++done # for ac_tag
+
+
+-exit 0
+-EOF
++{ (exit 0); exit 0; }
++_ACEOF
+ chmod +x $CONFIG_STATUS
+-rm -fr confdefs* $ac_clean_files
+-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
++ac_clean_files=$ac_clean_files_save
++
++test $ac_write_fail = 0 ||
++ { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
++$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
++ { (exit 1); exit 1; }; }
+
++
++# configure is writing to config.log, and then calls config.status.
++# config.status does its own redirection, appending to config.log.
++# Unfortunately, on DOS this fails, as config.log is still kept open
++# by configure, so config.status won't be able to write to it; its
++# output is simply discarded. So we exec the FD to /dev/null,
++# effectively closing config.log, so it can be properly (re)opened and
++# appended to by config.status. When coming back to configure, we
++# need to make the FD available again.
++if test "$no_create" != yes; then
++ ac_cs_success=:
++ ac_config_status_args=
++ test "$silent" = yes &&
++ ac_config_status_args="$ac_config_status_args --quiet"
++ exec 5>/dev/null
++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
++ exec 5>>config.log
++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
++ # would make configure fail if this is the last instruction.
++ $ac_cs_success || { (exit 1); exit 1; }
++fi
++
++#
++# CONFIG_SUBDIRS section.
++#
+ if test "$no_recursion" != yes; then
+
+- # Remove --cache-file and --srcdir arguments so they do not pile up.
++ # Remove --cache-file, --srcdir, and --disable-option-checking arguments
++ # so they do not pile up.
+ ac_sub_configure_args=
+ ac_prev=
+- for ac_arg in $ac_configure_args; do
++ eval "set x $ac_configure_args"
++ shift
++ for ac_arg
++ do
+ if test -n "$ac_prev"; then
+ ac_prev=
+ continue
+ fi
+- case "$ac_arg" in
++ case $ac_arg in
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
++ | --c=*)
++ ;;
++ --config-cache | -C)
+ ;;
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ ;;
+- *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
++ ac_prev=prefix ;;
++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
++ ;;
++ --disable-option-checking)
++ ;;
++ *)
++ case $ac_arg in
++ *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;;
+ esac
+ done
+
+- for ac_config_dir in ${SUBDIRS}; do
++ # Always prepend --prefix to ensure using the same prefix
++ # in subdir configurations.
++ ac_arg="--prefix=$prefix"
++ case $ac_arg in
++ *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
++
++ # Pass --silent
++ if test "$silent" = yes; then
++ ac_sub_configure_args="--silent $ac_sub_configure_args"
++ fi
++
++ # Always prepend --disable-option-checking to silence warnings, since
++ # different subdirs can have different --enable and --with options.
++ ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
++
++ ac_popdir=`pwd`
++ for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
+
+ # Do not complain, so a configure script can configure whichever
+ # parts of a large source tree are present.
+- if test ! -d $srcdir/$ac_config_dir; then
+- continue
+- fi
++ test -d "$srcdir/$ac_dir" || continue
+
+- echo configuring in $ac_config_dir
++ ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
++ $as_echo "$as_me:$LINENO: $ac_msg" >&5
++ $as_echo "$ac_msg" >&6
++ { as_dir="$ac_dir"
++ case $as_dir in #(
++ -*) as_dir=./$as_dir;;
++ esac
++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
++ as_dirs=
++ while :; do
++ case $as_dir in #(
++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
++ *) as_qdir=$as_dir;;
++ esac
++ as_dirs="'$as_qdir' $as_dirs"
++ as_dir=`$as_dirname -- "$as_dir" ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ test -d "$as_dir" && break
++ done
++ test -z "$as_dirs" || eval "mkdir $as_dirs"
++ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
++$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
++ { (exit 1); exit 1; }; }; }
++ ac_builddir=.
+
+- case "$srcdir" in
+- .) ;;
+- *)
+- if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
+- else
+- { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
+- fi
+- ;;
+- esac
++case "$ac_dir" in
++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
++*)
++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
++ # A ".." for each directory in $ac_dir_suffix.
++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
++ case $ac_top_builddir_sub in
++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
++ esac ;;
++esac
++ac_abs_top_builddir=$ac_pwd
++ac_abs_builddir=$ac_pwd$ac_dir_suffix
++# for backward compatibility:
++ac_top_builddir=$ac_top_build_prefix
+
+- ac_popdir=`pwd`
+- cd $ac_config_dir
++case $srcdir in
++ .) # We are building in place.
++ ac_srcdir=.
++ ac_top_srcdir=$ac_top_builddir_sub
++ ac_abs_top_srcdir=$ac_pwd ;;
++ [\\/]* | ?:[\\/]* ) # Absolute name.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir
++ ac_abs_top_srcdir=$srcdir ;;
++ *) # Relative name.
++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_build_prefix$srcdir
++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
++esac
++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+- # A "../" for each directory in /$ac_config_dir.
+- ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
+
+- case "$srcdir" in
+- .) # No --srcdir option. We are building in place.
+- ac_sub_srcdir=$srcdir ;;
+- /*) # Absolute path.
+- ac_sub_srcdir=$srcdir/$ac_config_dir ;;
+- *) # Relative path.
+- ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
+- esac
++ cd "$ac_dir"
+
+ # Check for guested configure; otherwise get Cygnus style configure.
+- if test -f $ac_sub_srcdir/configure; then
+- ac_sub_configure=$ac_sub_srcdir/configure
+- elif test -f $ac_sub_srcdir/configure.in; then
+- ac_sub_configure=$ac_configure
++ if test -f "$ac_srcdir/configure.gnu"; then
++ ac_sub_configure=$ac_srcdir/configure.gnu
++ elif test -f "$ac_srcdir/configure"; then
++ ac_sub_configure=$ac_srcdir/configure
++ elif test -f "$ac_srcdir/configure.in"; then
++ # This should be Cygnus configure.
++ ac_sub_configure=$ac_aux_dir/configure
+ else
+- echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
++ { $as_echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
++$as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
+ ac_sub_configure=
+ fi
+
+ # The recursion is here.
+ if test -n "$ac_sub_configure"; then
+-
+ # Make the cache file name correct relative to the subdirectory.
+- case "$cache_file" in
+- /*) ac_sub_cache_file=$cache_file ;;
+- *) # Relative path.
+- ac_sub_cache_file="$ac_dots$cache_file" ;;
++ case $cache_file in
++ [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
++ *) # Relative name.
++ ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
+ esac
+- case "$ac_given_INSTALL" in
+- [/$]*) INSTALL="$ac_given_INSTALL" ;;
+- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+- esac
+
+- echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
++ { $as_echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
++$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
+ # The eval makes quoting arguments work.
+- if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
+- then :
+- else
+- { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
+- fi
++ eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
++ --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
++ { { $as_echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
++$as_echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+
+- cd $ac_popdir
++ cd "$ac_popdir"
+ done
+ fi
++if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
++ { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
++$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
++fi
+
--- ecosconfig-imx-200910.orig/debian/patches/01_fix_headers.dpatch
+++ ecosconfig-imx-200910/debian/patches/01_fix_headers.dpatch
@@ -0,0 +1,47 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 00_fix_headers.dpatch by Michael Casadevall
+##
+## DP: Corrects the source files from ecosconfig to build with a modern GCC/glibc
+
+@DPATCH@
+diff -urNad ecosconfig-imx~/src/infra/assert.cxx ecosconfig-imx/src/infra/assert.cxx
+--- ecosconfig-imx~/src/infra/assert.cxx 2005-01-09 02:12:14.000000000 -0500
++++ ecosconfig-imx/src/infra/assert.cxx 2009-03-16 12:56:17.719305025 -0400
+@@ -59,8 +59,10 @@
+
+ // STDIO is needed for the default assertion handler.
+ // STDLIB is needed for exit() and the status codes.
++// STRING needed for strcpy()
+ #include
+ #include
++#include
+
+ #if defined(__unix__) || defined(__CYGWIN32__)
+ extern "C" {
+diff -urNad ecosconfig-imx~/src/libcdl/cdlcore.hxx ecosconfig-imx/src/libcdl/cdlcore.hxx
+--- ecosconfig-imx~/src/libcdl/cdlcore.hxx 2005-01-09 02:12:14.000000000 -0500
++++ ecosconfig-imx/src/libcdl/cdlcore.hxx 2009-03-16 12:56:17.719305025 -0400
+@@ -80,6 +80,10 @@
+ #include
+ #include
+
++// is needed because newer GCC's require the header
++// to be included to have access to strcpy() and friends
++#include
++
+ // is needed in various places in the implementation.
+ // This #include should be moved to an implementation-specific
+ // header.
+diff -urNad ecosconfig-imx~/src/tools/configtool/standalone/common/cdl_exec.cxx ecosconfig-imx/src/tools/configtool/standalone/common/cdl_exec.cxx
+--- ecosconfig-imx~/src/tools/configtool/standalone/common/cdl_exec.cxx 2005-01-09 02:12:14.000000000 -0500
++++ ecosconfig-imx/src/tools/configtool/standalone/common/cdl_exec.cxx 2009-03-16 12:56:17.723306232 -0400
+@@ -48,6 +48,9 @@
+ #include /* for MAXPATHLEN */
+ #include /* for cygwin_conv_to_win32_path() */
+ #endif
++#ifdef __linux__
++#include
++#endif
+ #include "build.hxx"
+ #include "cdl_exec.hxx"
+
--- ecosconfig-imx-200910.orig/debian/patches/00list
+++ ecosconfig-imx-200910/debian/patches/00list
@@ -0,0 +1,2 @@
+01_fix_headers
+99_autoreconf