diff -Nru anjuta-3.26.0/configure anjuta-3.28.0/configure
--- anjuta-3.26.0/configure 2017-09-10 19:41:44.000000000 +0000
+++ anjuta-3.28.0/configure 2018-03-11 15:34:24.000000000 +0000
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for Anjuta 3.26.0.
+# Generated by GNU Autoconf 2.69 for Anjuta 3.28.0.
#
# Report bugs to .
#
@@ -591,8 +591,8 @@
# Identity of this package.
PACKAGE_NAME='Anjuta'
PACKAGE_TARNAME='anjuta'
-PACKAGE_VERSION='3.26.0'
-PACKAGE_STRING='Anjuta 3.26.0'
+PACKAGE_VERSION='3.28.0'
+PACKAGE_STRING='Anjuta 3.28.0'
PACKAGE_BUGREPORT='http://bugzilla.gnome.org/enter_bug.cgi?product=anjuta'
PACKAGE_URL='http://www.anjuta.org/'
@@ -1585,7 +1585,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures Anjuta 3.26.0 to adapt to many kinds of systems.
+\`configure' configures Anjuta 3.28.0 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1655,7 +1655,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of Anjuta 3.26.0:";;
+ short | recursive ) echo "Configuration of Anjuta 3.28.0:";;
esac
cat <<\_ACEOF
@@ -1871,7 +1871,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-Anjuta configure 3.26.0
+Anjuta configure 3.28.0
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2516,7 +2516,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by Anjuta $as_me 3.26.0, which was
+It was created by Anjuta $as_me 3.28.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -2878,9 +2878,9 @@
ANJUTA_MAJOR_VERSION=3
-$as_echo "#define ANJUTA_MINOR_VERSION 26" >>confdefs.h
+$as_echo "#define ANJUTA_MINOR_VERSION 28" >>confdefs.h
-ANJUTA_MINOR_VERSION=26
+ANJUTA_MINOR_VERSION=28
$as_echo "#define ANJUTA_MICRO_VERSION 0" >>confdefs.h
@@ -2888,14 +2888,14 @@
ANJUTA_MICRO_VERSION=0
-$as_echo "#define ANJUTA_VERSION 3.26.0" >>confdefs.h
+$as_echo "#define ANJUTA_VERSION 3.28.0" >>confdefs.h
-ANJUTA_VERSION=3.26.0
+ANJUTA_VERSION=3.28.0
-BUGZILLA_VERSION=3.26.0
+BUGZILLA_VERSION=3.28.0
GLIB_REQUIRED=2.34.0
@@ -3441,7 +3441,7 @@
# Define the identity of the package.
PACKAGE='anjuta'
- VERSION='3.26.0'
+ VERSION='3.28.0'
cat >>confdefs.h <<_ACEOF
@@ -18989,44 +18989,52 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libvala is available" >&5
$as_echo_n "checking if libvala is available... " >&6; }
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.18 \""; } >&5
- ($PKG_CONFIG --exists --print-errors " libvala-0.18 ") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.40 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.40 ") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- valaver="-0.18"
+ valaver="-0.40"
fi
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.20 \""; } >&5
- ($PKG_CONFIG --exists --print-errors " libvala-0.20 ") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.38 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.38 ") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- valaver="-0.20"
+ valaver="-0.38"
fi
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.22 \""; } >&5
- ($PKG_CONFIG --exists --print-errors " libvala-0.22 ") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.36 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.36 ") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- valaver="-0.22"
+ valaver="-0.36"
fi
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.24 \""; } >&5
- ($PKG_CONFIG --exists --print-errors " libvala-0.24 ") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.34 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.34 ") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- valaver="-0.24"
+ valaver="-0.34"
fi
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.26 \""; } >&5
- ($PKG_CONFIG --exists --print-errors " libvala-0.26 ") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.32 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.32 ") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- valaver="-0.26"
+ valaver="-0.32"
+fi
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.30 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.30 ") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ valaver="-0.30"
fi
if test -n "$PKG_CONFIG" && \
{ { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.28 \""; } >&5
@@ -19037,44 +19045,44 @@
valaver="-0.28"
fi
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.30 \""; } >&5
- ($PKG_CONFIG --exists --print-errors " libvala-0.30 ") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.26 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.26 ") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- valaver="-0.30"
+ valaver="-0.26"
fi
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.32 \""; } >&5
- ($PKG_CONFIG --exists --print-errors " libvala-0.32 ") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.24 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.24 ") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- valaver="-0.32"
+ valaver="-0.24"
fi
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.34 \""; } >&5
- ($PKG_CONFIG --exists --print-errors " libvala-0.34 ") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.22 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.22 ") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- valaver="-0.34"
+ valaver="-0.22"
fi
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.36 \""; } >&5
- ($PKG_CONFIG --exists --print-errors " libvala-0.36 ") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.20 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.20 ") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- valaver="-0.36"
+ valaver="-0.20"
fi
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.38 \""; } >&5
- ($PKG_CONFIG --exists --print-errors " libvala-0.38 ") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" libvala-0.18 \""; } >&5
+ ($PKG_CONFIG --exists --print-errors " libvala-0.18 ") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- valaver="-0.38"
+ valaver="-0.18"
fi
if test "x$valaver" != "x"; then
@@ -24531,7 +24539,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by Anjuta $as_me 3.26.0, which was
+This file was extended by Anjuta $as_me 3.28.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -24598,7 +24606,7 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-Anjuta config.status 3.26.0
+Anjuta config.status 3.28.0
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
diff -Nru anjuta-3.26.0/configure.ac anjuta-3.28.0/configure.ac
--- anjuta-3.26.0/configure.ac 2017-09-10 19:41:04.000000000 +0000
+++ anjuta-3.28.0/configure.ac 2018-03-11 12:52:56.000000000 +0000
@@ -3,7 +3,7 @@
AC_PREREQ(2.65)
m4_define(anjuta_major_version, 3)
-m4_define(anjuta_minor_version, 26)
+m4_define(anjuta_minor_version, 28)
m4_define(anjuta_micro_version, 0)
m4_define(anjuta_version, anjuta_major_version.anjuta_minor_version.anjuta_micro_version)
m4_define(bugzilla_version, anjuta_major_version.anjuta_minor_version.anjuta_micro_version)
@@ -334,7 +334,7 @@
else
AC_MSG_RESULT(no)
AC_MSG_CHECKING(if libvala is available)
- m4_foreach([VERSION], [[0.18], [0.20], [0.22], [0.24], [0.26], [0.28], [0.30], [0.32],[0.34],[0.36],[0.38]],
+ m4_foreach([VERSION], [[0.40], [0.38], [0.36], [0.34], [0.32], [0.30], [0.28], [0.26], [0.24], [0.22], [0.20], [0.18]],
[PKG_CHECK_EXISTS([ libvala-VERSION ],
[ valaver="-VERSION" ])
])
diff -Nru anjuta-3.26.0/data/welcome.txt anjuta-3.28.0/data/welcome.txt
--- anjuta-3.26.0/data/welcome.txt 2017-09-10 19:41:55.000000000 +0000
+++ anjuta-3.28.0/data/welcome.txt 2018-03-11 15:34:33.000000000 +0000
@@ -1,4 +1,4 @@
-Anjuta IDE Version 3.26.0
+Anjuta IDE Version 3.28.0
Copyright (C) Naba Kumar
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff -Nru anjuta-3.26.0/debian/anjuta.install anjuta-3.28.0/debian/anjuta.install
--- anjuta-3.26.0/debian/anjuta.install 2018-02-27 21:11:41.000000000 +0000
+++ anjuta-3.28.0/debian/anjuta.install 2018-03-11 16:58:04.000000000 +0000
@@ -4,6 +4,6 @@
usr/lib/*/anjuta/*.plugin
usr/lib/*/anjuta/*.py
usr/lib/*/anjuta/*.so
-usr/share/appdata
usr/share/applications
usr/lib/*/glade/modules/*.so
+usr/share/metainfo
diff -Nru anjuta-3.26.0/debian/changelog anjuta-3.28.0/debian/changelog
--- anjuta-3.26.0/debian/changelog 2018-02-27 21:11:41.000000000 +0000
+++ anjuta-3.28.0/debian/changelog 2018-03-11 16:58:04.000000000 +0000
@@ -1,3 +1,11 @@
+anjuta (2:3.28.0-1) unstable; urgency=medium
+
+ * New upstream release
+ * Drop vala 0.40 patch: Applied in new release
+ * anjuta.install: Update for new AppStream metadata location
+
+ -- Jeremy Bicha Sun, 11 Mar 2018 12:58:04 -0400
+
anjuta (2:3.26.0-5) unstable; urgency=medium
* Build with vala 0.40
@@ -272,7 +280,7 @@
anjuta (2:3.2.1-2) unstable; urgency=low
[ Sebastien Bacher ]
- * debian/control.in: Build-Depends on python-dev, it's required to build
+ * debian/control.in: Build-Depends on python-dev, it's required to build
with the python-loader support
[ Jordi Mallach ]
@@ -376,9 +384,9 @@
anjuta (2:2.32.0.0-5) unstable; urgency=low
* Pick more patches in the upstream repository.
- + 08_launcher_kill.patch: avoid anjuta petit-suiciding by killing
+ + 08_launcher_kill.patch: avoid anjuta petit-suiciding by killing
itself.
- + 09_libxml_crash.patch: fix a crash when using pulseaudio, caused
+ + 09_libxml_crash.patch: fix a crash when using pulseaudio, caused
by a misuse of libxml.
* 90_autotools.patch: regenerated accordingly.
@@ -387,15 +395,15 @@
anjuta (2:2.32.0.0-4) unstable; urgency=low
* Pick some patches in the upstream git repository.
- + 02_python_autoindent_hang.patch: fix lockup in the python
+ + 02_python_autoindent_hang.patch: fix lockup in the python
auto-indentation code.
- + 03_brace_completion_crash.patch: fix crasher in the C++/Java smart
+ + 03_brace_completion_crash.patch: fix crasher in the C++/Java smart
brace completion code.
- + 04_launcher_crash.patch: replace possible crasher in the launcher
+ + 04_launcher_crash.patch: replace possible crasher in the launcher
code by a critical warning.
- + 05_autocompletion_duplicates.patch: don’t show duplicate results
+ + 05_autocompletion_duplicates.patch: don’t show duplicate results
in C++/Java autocompletion.
- + 06_autocompletion_brace.patch: in C++/Java, don’t add opening
+ + 06_autocompletion_brace.patch: in C++/Java, don’t add opening
brace when autocompleting if it is already here.
+ 07_filewizard_csharp.patch: don’t require headers for C#.
@@ -403,7 +411,7 @@
anjuta (2:2.32.0.0-3) unstable; urgency=low
- * 01_python_plugin_ldflags.patch: new patch. Fix Python plugin by
+ * 01_python_plugin_ldflags.patch: new patch. Fix Python plugin by
linking it with the correct flags.
* 90_autotools.patch: regenerated accordingly.
@@ -425,11 +433,11 @@
anjuta (2:2.31.92.0-1) experimental; urgency=low
* New upstream release candidate.
- * 21_glib_2.24.patch: revert upstream patch that introduces Glib 2.25
+ * 21_glib_2.24.patch: revert upstream patch that introduces Glib 2.25
requirement.
* 22_no_gdbus.patch: ditto for the one that introduces GDBus.
* 23_libgda_4.0.patch: revert the changes that require libgda 4.1.
- * 24_libdevhelp_1.0.patch: revert the patch that introduces devhelp
+ * 24_libdevhelp_1.0.patch: revert the patch that introduces devhelp
2.32 requirement.
* 90_autotools.patch: run autoreconf on top of that.
* Update build-dependencies.
@@ -520,7 +528,7 @@
anjuta (2:2.28.1.0-1) unstable; urgency=low
[ Josselin Mouette ]
- * Conflict/replace libgbf-1-0 (etch) and libgbf-1-1 (lenny) as well as
+ * Conflict/replace libgbf-1-0 (etch) and libgbf-1-1 (lenny) as well as
the existing libgbf-1-2 conflict. Closes: #548159.
[ Luca Bruno ]
@@ -593,12 +601,12 @@
* anjuta-dbg is in the debug section.
[ Josselin Mouette ]
- * Add libglib2.0-doc and libgtk2.0-doc to b-d-i to ensure proper
+ * Add libglib2.0-doc and libgtk2.0-doc to b-d-i to ensure proper
xrefs.
* Remove scrollkeeper dependency.
* New upstream release.
* Update build-dependencies.
- * 01_gda_optional.patch: new patch. Make the symboldb plugin optional
+ * 01_gda_optional.patch: new patch. Make the symboldb plugin optional
since libgda4 is not in Debian yet.
* 90_relibtoolize.patch: relibtoolize accordingly.
* Remove chrpath calls, rely on relibtoolizing instead.
@@ -619,11 +627,11 @@
* Remove .la files in /usr/lib/anjuta.
* Rename the plugin with useless versioning to a plain .so.
* Exclude this directory for dh_makeshlibs.
- * Remove recommends on cvs (wut?), gnome-terminal (anjuta has its own
- VTE widget now), indent (integrated), ctags (integrated), devhelp
+ * Remove recommends on cvs (wut?), gnome-terminal (anjuta has its own
+ VTE widget now), indent (integrated), ctags (integrated), devhelp
(directly uses libdevhelp).
* Remove suggests on devhelp-books (obsolete).
- * Replace suggests on obsolete glade-3 | glade-gnome-3 by
+ * Replace suggests on obsolete glade-3 | glade-gnome-3 by
glade-gnome.
* Remove upstream COPYING and INSTALL files.
diff -Nru anjuta-3.26.0/debian/control anjuta-3.28.0/debian/control
--- anjuta-3.26.0/debian/control 2018-02-27 21:11:41.000000000 +0000
+++ anjuta-3.28.0/debian/control 2018-03-11 16:58:04.000000000 +0000
@@ -1,5 +1,5 @@
# This file is autogenerated. DO NOT EDIT!
-#
+#
# Modifications should be made to debian/control.in instead.
# This file is regenerated automatically in the clean target.
Source: anjuta
@@ -45,7 +45,7 @@
Architecture: any
Depends: ${shlibs:Depends},
${misc:Depends},
- anjuta-common (= ${source:Version})
+ anjuta-common (>= ${source:Version})
Recommends: gcc | g++,
make,
yelp,
@@ -91,7 +91,7 @@
Section: libs
Depends: ${misc:Depends},
${shlibs:Depends},
- anjuta-common (= ${source:Version})
+ anjuta-common (>= ${source:Version})
Description: GNOME development IDE, for C/C++ - shared libraries
This IDE for C/C++ and GNOME/Gtk+ applications has features that enable easy
debugging, management of code and GUI design by providing a simple and
diff -Nru anjuta-3.26.0/debian/control.in anjuta-3.28.0/debian/control.in
--- anjuta-3.26.0/debian/control.in 2018-02-27 21:11:41.000000000 +0000
+++ anjuta-3.28.0/debian/control.in 2018-03-11 16:58:04.000000000 +0000
@@ -41,7 +41,7 @@
Architecture: any
Depends: ${shlibs:Depends},
${misc:Depends},
- anjuta-common (= ${source:Version})
+ anjuta-common (>= ${source:Version})
Recommends: gcc | g++,
make,
yelp,
@@ -87,7 +87,7 @@
Section: libs
Depends: ${misc:Depends},
${shlibs:Depends},
- anjuta-common (= ${source:Version})
+ anjuta-common (>= ${source:Version})
Description: GNOME development IDE, for C/C++ - shared libraries
This IDE for C/C++ and GNOME/Gtk+ applications has features that enable easy
debugging, management of code and GUI design by providing a simple and
diff -Nru anjuta-3.26.0/debian/patches/0002-Build-with-vala-0.40.patch anjuta-3.28.0/debian/patches/0002-Build-with-vala-0.40.patch
--- anjuta-3.26.0/debian/patches/0002-Build-with-vala-0.40.patch 2018-02-27 21:11:41.000000000 +0000
+++ anjuta-3.28.0/debian/patches/0002-Build-with-vala-0.40.patch 1970-01-01 00:00:00.000000000 +0000
@@ -1,22 +0,0 @@
-From: Jeremy Bicha
-Date: Fri, 9 Feb 2018 19:14:14 -0500
-Subject: build: Allow building with vala 0.40
-
-https://bugzilla.gnome.org/show_bug.cgi?id=793346
----
- configure.ac | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/configure.ac b/configure.ac
-index 626c6a8..93db4b6 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -334,7 +334,7 @@ if test "$user_disabled_vala" = 1; then
- else
- AC_MSG_RESULT(no)
- AC_MSG_CHECKING(if libvala is available)
-- m4_foreach([VERSION], [[0.18], [0.20], [0.22], [0.24], [0.26], [0.28], [0.30], [0.32],[0.34],[0.36],[0.38]],
-+ m4_foreach([VERSION], [[0.40], [0.38], [0.36], [0.34], [0.32], [0.30], [0.28], [0.26], [0.24], [0.22], [0.20], [0.18]],
- [PKG_CHECK_EXISTS([ libvala-VERSION ],
- [ valaver="-VERSION" ])
- ])
diff -Nru anjuta-3.26.0/debian/patches/series anjuta-3.28.0/debian/patches/series
--- anjuta-3.26.0/debian/patches/series 2018-02-27 21:11:41.000000000 +0000
+++ anjuta-3.28.0/debian/patches/series 2018-03-11 16:58:04.000000000 +0000
@@ -1,2 +1 @@
02_no_gnu_gettext.patch
-0002-Build-with-vala-0.40.patch
diff -Nru anjuta-3.26.0/doc/anjuta.1 anjuta-3.28.0/doc/anjuta.1
--- anjuta-3.26.0/doc/anjuta.1 2017-09-10 19:41:55.000000000 +0000
+++ anjuta-3.28.0/doc/anjuta.1 2018-03-11 15:34:33.000000000 +0000
@@ -1,4 +1,4 @@
-.TH "Anjuta" "1" "3.26.0" "Jens Georg" ""
+.TH "Anjuta" "1" "3.28.0" "Jens Georg" ""
.SH "NAME"
.LP
anjuta \- GNOME Integrated Development Environment
diff -Nru anjuta-3.26.0/doc/anjuta-launcher.1 anjuta-3.28.0/doc/anjuta-launcher.1
--- anjuta-3.26.0/doc/anjuta-launcher.1 2017-09-10 19:41:55.000000000 +0000
+++ anjuta-3.28.0/doc/anjuta-launcher.1 2018-03-11 15:34:33.000000000 +0000
@@ -1,4 +1,4 @@
-.TH "anjuta-launcher" "1" "3.26.0" "Jens Georg" ""
+.TH "anjuta-launcher" "1" "3.28.0" "Jens Georg" ""
.SH "NAME"
.LP
anjuta-launcher \- GNOME Integrated Development Environment
diff -Nru anjuta-3.26.0/gtk-doc.make anjuta-3.28.0/gtk-doc.make
--- anjuta-3.26.0/gtk-doc.make 2017-08-25 20:43:28.000000000 +0000
+++ anjuta-3.28.0/gtk-doc.make 2017-12-11 17:57:06.000000000 +0000
@@ -1,4 +1,22 @@
# -*- mode: makefile -*-
+#
+# gtk-doc.make - make rules for gtk-doc
+# Copyright (C) 2003 James Henstridge
+# 2004-2007 Damon Chaplin
+# 2007-2017 Stefan Sauer
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
####################################
# Everything below here is generic #
@@ -81,55 +99,54 @@
#### setup ####
-GTK_DOC_V_SETUP=$(GTK_DOC_V_SETUP_$(V))
-GTK_DOC_V_SETUP_=$(GTK_DOC_V_SETUP_$(AM_DEFAULT_VERBOSITY))
+GTK_DOC_V_SETUP=$(GTK_DOC_V_SETUP_@AM_V@)
+GTK_DOC_V_SETUP_=$(GTK_DOC_V_SETUP_@AM_DEFAULT_V@)
GTK_DOC_V_SETUP_0=@echo " DOC Preparing build";
setup-build.stamp:
-$(GTK_DOC_V_SETUP)if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
- files=`echo $(SETUP_FILES) $(DOC_MODULE).types`; \
- if test "x$$files" != "x" ; then \
- for file in $$files ; do \
- destdir=`dirname $(abs_builddir)/$$file`; \
- test -d "$$destdir" || mkdir -p "$$destdir"; \
- test -f $(abs_srcdir)/$$file && \
- cp -pf $(abs_srcdir)/$$file $(abs_builddir)/$$file || true; \
- done; \
- fi; \
+ files=`echo $(SETUP_FILES) $(DOC_MODULE).types`; \
+ if test "x$$files" != "x" ; then \
+ for file in $$files ; do \
+ destdir=`dirname $(abs_builddir)/$$file`; \
+ test -d "$$destdir" || mkdir -p "$$destdir"; \
+ test -f $(abs_srcdir)/$$file && \
+ cp -pf $(abs_srcdir)/$$file $(abs_builddir)/$$file || true; \
+ done; \
+ fi; \
fi
$(AM_V_at)touch setup-build.stamp
-
#### scan ####
-GTK_DOC_V_SCAN=$(GTK_DOC_V_SCAN_$(V))
-GTK_DOC_V_SCAN_=$(GTK_DOC_V_SCAN_$(AM_DEFAULT_VERBOSITY))
+GTK_DOC_V_SCAN=$(GTK_DOC_V_SCAN_@AM_V@)
+GTK_DOC_V_SCAN_=$(GTK_DOC_V_SCAN_@AM_DEFAULT_V@)
GTK_DOC_V_SCAN_0=@echo " DOC Scanning header files";
-GTK_DOC_V_INTROSPECT=$(GTK_DOC_V_INTROSPECT_$(V))
-GTK_DOC_V_INTROSPECT_=$(GTK_DOC_V_INTROSPECT_$(AM_DEFAULT_VERBOSITY))
+GTK_DOC_V_INTROSPECT=$(GTK_DOC_V_INTROSPECT_@AM_V@)
+GTK_DOC_V_INTROSPECT_=$(GTK_DOC_V_INTROSPECT_@AM_DEFAULT_V@)
GTK_DOC_V_INTROSPECT_0=@echo " DOC Introspecting gobjects";
scan-build.stamp: setup-build.stamp $(HFILE_GLOB) $(CFILE_GLOB)
$(GTK_DOC_V_SCAN)_source_dir='' ; \
for i in $(DOC_SOURCE_DIR) ; do \
- _source_dir="$${_source_dir} --source-dir=$$i" ; \
+ _source_dir="$${_source_dir} --source-dir=$$i" ; \
done ; \
gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)
$(GTK_DOC_V_INTROSPECT)if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \
- scanobj_options=""; \
- gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \
- if test "$$?" = "0"; then \
- if test "x$(V)" = "x1"; then \
- scanobj_options="--verbose"; \
- fi; \
+ scanobj_options=""; \
+ gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \
+ if test "$$?" = "0"; then \
+ if test "x$(V)" = "x1"; then \
+ scanobj_options="--verbose"; \
fi; \
- CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \
- gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \
+ fi; \
+ CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \
+ gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \
else \
- for i in $(SCANOBJ_FILES) ; do \
- test -f $$i || touch $$i ; \
- done \
+ for i in $(SCANOBJ_FILES) ; do \
+ test -f $$i || touch $$i ; \
+ done \
fi
$(AM_V_at)touch scan-build.stamp
@@ -138,14 +155,14 @@
#### xml ####
-GTK_DOC_V_XML=$(GTK_DOC_V_XML_$(V))
-GTK_DOC_V_XML_=$(GTK_DOC_V_XML_$(AM_DEFAULT_VERBOSITY))
+GTK_DOC_V_XML=$(GTK_DOC_V_XML_@AM_V@)
+GTK_DOC_V_XML_=$(GTK_DOC_V_XML_@AM_DEFAULT_V@)
GTK_DOC_V_XML_0=@echo " DOC Building XML";
sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) xml/gtkdocentities.ent
$(GTK_DOC_V_XML)_source_dir='' ; \
for i in $(DOC_SOURCE_DIR) ; do \
- _source_dir="$${_source_dir} --source-dir=$$i" ; \
+ _source_dir="$${_source_dir} --source-dir=$$i" ; \
done ; \
gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)
$(AM_V_at)touch sgml-build.stamp
@@ -153,6 +170,9 @@
sgml.stamp: sgml-build.stamp
@true
+$(DOC_MAIN_SGML_FILE): sgml-build.stamp
+ @true
+
xml/gtkdocentities.ent: Makefile
$(GTK_DOC_V_XML)$(MKDIR_P) $(@D) && ( \
echo ""; \
@@ -166,12 +186,12 @@
#### html ####
-GTK_DOC_V_HTML=$(GTK_DOC_V_HTML_$(V))
-GTK_DOC_V_HTML_=$(GTK_DOC_V_HTML_$(AM_DEFAULT_VERBOSITY))
+GTK_DOC_V_HTML=$(GTK_DOC_V_HTML_@AM_V@)
+GTK_DOC_V_HTML_=$(GTK_DOC_V_HTML_@AM_DEFAULT_V@)
GTK_DOC_V_HTML_0=@echo " DOC Building HTML";
-GTK_DOC_V_XREF=$(GTK_DOC_V_XREF_$(V))
-GTK_DOC_V_XREF_=$(GTK_DOC_V_XREF_$(AM_DEFAULT_VERBOSITY))
+GTK_DOC_V_XREF=$(GTK_DOC_V_XREF_@AM_V@)
+GTK_DOC_V_XREF_=$(GTK_DOC_V_XREF_@AM_DEFAULT_V@)
GTK_DOC_V_XREF_0=@echo " DOC Fixing cross-references";
html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files)
@@ -190,20 +210,16 @@
cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
-@test "x$(HTML_IMAGES)" = "x" || \
for file in $(HTML_IMAGES) ; do \
- if test -f $(abs_srcdir)/$$file ; then \
- cp $(abs_srcdir)/$$file $(abs_builddir)/html; \
- fi; \
- if test -f $(abs_builddir)/$$file ; then \
- cp $(abs_builddir)/$$file $(abs_builddir)/html; \
- fi; \
+ test -f $(abs_srcdir)/$$file && cp $(abs_srcdir)/$$file $(abs_builddir)/html; \
+ test -f $(abs_builddir)/$$file && cp $(abs_builddir)/$$file $(abs_builddir)/html; \
done;
$(GTK_DOC_V_XREF)gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
$(AM_V_at)touch html-build.stamp
#### pdf ####
-GTK_DOC_V_PDF=$(GTK_DOC_V_PDF_$(V))
-GTK_DOC_V_PDF_=$(GTK_DOC_V_PDF_$(AM_DEFAULT_VERBOSITY))
+GTK_DOC_V_PDF=$(GTK_DOC_V_PDF_@AM_V@)
+GTK_DOC_V_PDF_=$(GTK_DOC_V_PDF_@AM_DEFAULT_V@)
GTK_DOC_V_PDF_0=@echo " DOC Building PDF";
pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files)
diff -Nru anjuta-3.26.0/libanjuta/anjuta-enum-types.c anjuta-3.28.0/libanjuta/anjuta-enum-types.c
--- anjuta-3.26.0/libanjuta/anjuta-enum-types.c 2017-09-10 19:41:58.000000000 +0000
+++ anjuta-3.28.0/libanjuta/anjuta-enum-types.c 2018-03-11 15:34:37.000000000 +0000
@@ -1,5 +1,5 @@
-
+/* This file is generated by glib-mkenums, do not modify it. This code is licensed under the same license as the containing project. Note that it links to GLib, so must comply with the LGPL linking clauses. */
#include "anjuta-enum-types.h"
@@ -382,5 +382,5 @@
#define __ANJUTA_ENUM_TYPES_C__
-
+/* Generated data ends here */
diff -Nru anjuta-3.26.0/libanjuta/anjuta-enum-types.h anjuta-3.28.0/libanjuta/anjuta-enum-types.h
--- anjuta-3.26.0/libanjuta/anjuta-enum-types.h 2017-09-10 19:02:54.000000000 +0000
+++ anjuta-3.28.0/libanjuta/anjuta-enum-types.h 2018-03-11 13:11:19.000000000 +0000
@@ -1,5 +1,5 @@
-
+/* This file is generated by glib-mkenums, do not modify it. This code is licensed under the same license as the containing project. Note that it links to GLib, so must comply with the LGPL linking clauses. */
#ifndef __ANJUTA_ENUM_TYPES_H__
#define __ANJUTA_ENUM_TYPES_H__
@@ -58,5 +58,5 @@
#endif /* __ANJUTA_ENUM_TYPES_H__ */
-
+/* Generated data ends here */
diff -Nru anjuta-3.26.0/libanjuta/anjuta-modeline.c anjuta-3.28.0/libanjuta/anjuta-modeline.c
--- anjuta-3.26.0/libanjuta/anjuta-modeline.c 2017-08-19 12:58:02.000000000 +0000
+++ anjuta-3.28.0/libanjuta/anjuta-modeline.c 2017-11-03 21:19:39.000000000 +0000
@@ -124,7 +124,7 @@
parse_vim_modeline (IndentationParams *params, const gchar *line, gint linenum)
{
gchar *ptr;
- gchar *end;
+ const gchar *end;
gchar *key;
gchar *value;
@@ -149,23 +149,22 @@
}
ptr += 3;
- for (end = ptr;; end++)
+ for (end = ptr; *end != '\0'; end++)
{
if ((*end == ':') && (*(end-1) != '\\')) break;
}
- *end = '\0';
- while (*ptr != '\0')
+ while (ptr != end)
{
gchar sep;
while (g_ascii_isspace (*ptr)) ptr++;
- if (*ptr == '\0') break;
+ if (ptr == end) break;
/* Get key */
key = ptr++;
value = NULL;
- while ((*ptr != '\0') && (*ptr != '=') && !g_ascii_isspace(*ptr)) ptr++;
+ while ((ptr != end) && (*ptr != '=') && !g_ascii_isspace(*ptr)) ptr++;
sep = *ptr;
*ptr = '\0';
@@ -173,7 +172,7 @@
{
/* Get value */
value = ++ptr;
- while ((*ptr != '\0') && !g_ascii_isspace(*ptr)) ptr++;
+ while ((ptr != end) && !g_ascii_isspace(*ptr)) ptr++;
sep = *ptr;
*ptr = '\0';
diff -Nru anjuta-3.26.0/libanjuta/anjuta-version.h anjuta-3.28.0/libanjuta/anjuta-version.h
--- anjuta-3.26.0/libanjuta/anjuta-version.h 2017-09-10 19:41:54.000000000 +0000
+++ anjuta-3.28.0/libanjuta/anjuta-version.h 2018-03-11 15:34:33.000000000 +0000
@@ -40,7 +40,7 @@
*
* Anjuta minor version component (e.g. 2 if %LIBANJUTA_VERSION is 1.2.3)
*/
-#define LIBANJUTA_MINOR_VERSION (26)
+#define LIBANJUTA_MINOR_VERSION (28)
/**
* LIBANJUTA_MICRO_VERSION:
@@ -54,7 +54,7 @@
*
* Anjuta version.
*/
-#define LIBANJUTA_VERSION (3.26.0)
+#define LIBANJUTA_VERSION (3.28.0)
/**
* LIBANJUTA_VERSION_S:
@@ -62,7 +62,7 @@
* Anjuta version, encoded as a string, useful for printing and
* concatenation.
*/
-#define LIBANJUTA_VERSION_S "3.26.0"
+#define LIBANJUTA_VERSION_S "3.28.0"
/**
* LIBANJUTA_VERSION_HEX:
diff -Nru anjuta-3.26.0/libanjuta/interfaces/libanjuta-iface-marshallers.c anjuta-3.28.0/libanjuta/interfaces/libanjuta-iface-marshallers.c
--- anjuta-3.26.0/libanjuta/interfaces/libanjuta-iface-marshallers.c 2014-10-17 19:36:36.000000000 +0000
+++ anjuta-3.28.0/libanjuta/interfaces/libanjuta-iface-marshallers.c 2017-10-26 19:27:03.000000000 +0000
@@ -1,7 +1,5 @@
#include "libanjuta-iface-marshallers.h"
-
-#include
-
+#include
#ifdef G_ENABLE_DEBUG
#define g_marshal_value_peek_boolean(v) g_value_get_boolean (v)
@@ -49,22 +47,21 @@
#define g_marshal_value_peek_variant(v) (v)->data[0].v_pointer
#endif /* !G_ENABLE_DEBUG */
-
/* BOOLEAN:OBJECT (./libanjuta-iface-marshallers.list:1) */
void
libanjuta_iface_cclosure_marshal_BOOLEAN__OBJECT (GClosure *closure,
- GValue *return_value G_GNUC_UNUSED,
+ GValue *return_value,
guint n_param_values,
const GValue *param_values,
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef gboolean (*GMarshalFunc_BOOLEAN__OBJECT) (gpointer data1,
- gpointer arg_1,
- gpointer data2);
- register GMarshalFunc_BOOLEAN__OBJECT callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef gboolean (*GMarshalFunc_BOOLEAN__OBJECT) (gpointer data1,
+ gpointer arg1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_BOOLEAN__OBJECT callback;
gboolean v_return;
g_return_if_fail (return_value != NULL);
@@ -98,13 +95,13 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__BOOLEAN_INT) (gpointer data1,
- gboolean arg_1,
- gint arg_2,
- gpointer data2);
- register GMarshalFunc_VOID__BOOLEAN_INT callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__BOOLEAN_INT) (gpointer data1,
+ gboolean arg1,
+ gint arg2,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__BOOLEAN_INT callback;
g_return_if_fail (n_param_values == 3);
@@ -127,10 +124,109 @@
}
/* VOID:BOXED (./libanjuta-iface-marshallers.list:3) */
+void
+libanjuta_iface_cclosure_marshal_VOID__BOXED (GClosure *closure,
+ GValue *return_value G_GNUC_UNUSED,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint G_GNUC_UNUSED,
+ gpointer marshal_data)
+{
+ typedef void (*GMarshalFunc_VOID__BOXED) (gpointer data1,
+ gpointer arg1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__BOXED callback;
+
+ g_return_if_fail (n_param_values == 2);
+
+ if (G_CCLOSURE_SWAP_DATA (closure))
+ {
+ data1 = closure->data;
+ data2 = g_value_peek_pointer (param_values + 0);
+ }
+ else
+ {
+ data1 = g_value_peek_pointer (param_values + 0);
+ data2 = closure->data;
+ }
+ callback = (GMarshalFunc_VOID__BOXED) (marshal_data ? marshal_data : cc->callback);
+
+ callback (data1,
+ g_marshal_value_peek_boxed (param_values + 1),
+ data2);
+}
/* VOID:ENUM (./libanjuta-iface-marshallers.list:4) */
+void
+libanjuta_iface_cclosure_marshal_VOID__ENUM (GClosure *closure,
+ GValue *return_value G_GNUC_UNUSED,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint G_GNUC_UNUSED,
+ gpointer marshal_data)
+{
+ typedef void (*GMarshalFunc_VOID__ENUM) (gpointer data1,
+ gint arg1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__ENUM callback;
+
+ g_return_if_fail (n_param_values == 2);
+
+ if (G_CCLOSURE_SWAP_DATA (closure))
+ {
+ data1 = closure->data;
+ data2 = g_value_peek_pointer (param_values + 0);
+ }
+ else
+ {
+ data1 = g_value_peek_pointer (param_values + 0);
+ data2 = closure->data;
+ }
+ callback = (GMarshalFunc_VOID__ENUM) (marshal_data ? marshal_data : cc->callback);
+
+ callback (data1,
+ g_marshal_value_peek_enum (param_values + 1),
+ data2);
+}
/* VOID:INT (./libanjuta-iface-marshallers.list:5) */
+void
+libanjuta_iface_cclosure_marshal_VOID__INT (GClosure *closure,
+ GValue *return_value G_GNUC_UNUSED,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint G_GNUC_UNUSED,
+ gpointer marshal_data)
+{
+ typedef void (*GMarshalFunc_VOID__INT) (gpointer data1,
+ gint arg1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__INT callback;
+
+ g_return_if_fail (n_param_values == 2);
+
+ if (G_CCLOSURE_SWAP_DATA (closure))
+ {
+ data1 = closure->data;
+ data2 = g_value_peek_pointer (param_values + 0);
+ }
+ else
+ {
+ data1 = g_value_peek_pointer (param_values + 0);
+ data2 = closure->data;
+ }
+ callback = (GMarshalFunc_VOID__INT) (marshal_data ? marshal_data : cc->callback);
+
+ callback (data1,
+ g_marshal_value_peek_int (param_values + 1),
+ data2);
+}
/* VOID:INT,INT (./libanjuta-iface-marshallers.list:6) */
void
@@ -141,13 +237,13 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__INT_INT) (gpointer data1,
- gint arg_1,
- gint arg_2,
- gpointer data2);
- register GMarshalFunc_VOID__INT_INT callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__INT_INT) (gpointer data1,
+ gint arg1,
+ gint arg2,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__INT_INT callback;
g_return_if_fail (n_param_values == 3);
@@ -178,16 +274,16 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__INT_INT_ULONG_STRING_UINT) (gpointer data1,
- gint arg_1,
- gint arg_2,
- gulong arg_3,
- gpointer arg_4,
- guint arg_5,
- gpointer data2);
- register GMarshalFunc_VOID__INT_INT_ULONG_STRING_UINT callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__INT_INT_ULONG_STRING_UINT) (gpointer data1,
+ gint arg1,
+ gint arg2,
+ gulong arg3,
+ gpointer arg4,
+ guint arg5,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__INT_INT_ULONG_STRING_UINT callback;
g_return_if_fail (n_param_values == 6);
@@ -213,6 +309,39 @@
}
/* VOID:OBJECT (./libanjuta-iface-marshallers.list:8) */
+void
+libanjuta_iface_cclosure_marshal_VOID__OBJECT (GClosure *closure,
+ GValue *return_value G_GNUC_UNUSED,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint G_GNUC_UNUSED,
+ gpointer marshal_data)
+{
+ typedef void (*GMarshalFunc_VOID__OBJECT) (gpointer data1,
+ gpointer arg1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__OBJECT callback;
+
+ g_return_if_fail (n_param_values == 2);
+
+ if (G_CCLOSURE_SWAP_DATA (closure))
+ {
+ data1 = closure->data;
+ data2 = g_value_peek_pointer (param_values + 0);
+ }
+ else
+ {
+ data1 = g_value_peek_pointer (param_values + 0);
+ data2 = closure->data;
+ }
+ callback = (GMarshalFunc_VOID__OBJECT) (marshal_data ? marshal_data : cc->callback);
+
+ callback (data1,
+ g_marshal_value_peek_object (param_values + 1),
+ data2);
+}
/* VOID:OBJECT,BOOLEAN,INT,INT,STRING (./libanjuta-iface-marshallers.list:9) */
void
@@ -223,16 +352,16 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__OBJECT_BOOLEAN_INT_INT_STRING) (gpointer data1,
- gpointer arg_1,
- gboolean arg_2,
- gint arg_3,
- gint arg_4,
- gpointer arg_5,
- gpointer data2);
- register GMarshalFunc_VOID__OBJECT_BOOLEAN_INT_INT_STRING callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__OBJECT_BOOLEAN_INT_INT_STRING) (gpointer data1,
+ gpointer arg1,
+ gboolean arg2,
+ gint arg3,
+ gint arg4,
+ gpointer arg5,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__OBJECT_BOOLEAN_INT_INT_STRING callback;
g_return_if_fail (n_param_values == 6);
@@ -266,13 +395,13 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__OBJECT_CHAR) (gpointer data1,
- gpointer arg_1,
- gchar arg_2,
- gpointer data2);
- register GMarshalFunc_VOID__OBJECT_CHAR callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__OBJECT_CHAR) (gpointer data1,
+ gpointer arg1,
+ gchar arg2,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__OBJECT_CHAR callback;
g_return_if_fail (n_param_values == 3);
@@ -303,13 +432,13 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__OBJECT_STRING) (gpointer data1,
- gpointer arg_1,
- gpointer arg_2,
- gpointer data2);
- register GMarshalFunc_VOID__OBJECT_STRING callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__OBJECT_STRING) (gpointer data1,
+ gpointer arg1,
+ gpointer arg2,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__OBJECT_STRING callback;
g_return_if_fail (n_param_values == 3);
@@ -332,6 +461,39 @@
}
/* VOID:POINTER (./libanjuta-iface-marshallers.list:12) */
+void
+libanjuta_iface_cclosure_marshal_VOID__POINTER (GClosure *closure,
+ GValue *return_value G_GNUC_UNUSED,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint G_GNUC_UNUSED,
+ gpointer marshal_data)
+{
+ typedef void (*GMarshalFunc_VOID__POINTER) (gpointer data1,
+ gpointer arg1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__POINTER callback;
+
+ g_return_if_fail (n_param_values == 2);
+
+ if (G_CCLOSURE_SWAP_DATA (closure))
+ {
+ data1 = closure->data;
+ data2 = g_value_peek_pointer (param_values + 0);
+ }
+ else
+ {
+ data1 = g_value_peek_pointer (param_values + 0);
+ data2 = closure->data;
+ }
+ callback = (GMarshalFunc_VOID__POINTER) (marshal_data ? marshal_data : cc->callback);
+
+ callback (data1,
+ g_marshal_value_peek_pointer (param_values + 1),
+ data2);
+}
/* VOID:POINTER,BOXED (./libanjuta-iface-marshallers.list:13) */
void
@@ -342,13 +504,13 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__POINTER_BOXED) (gpointer data1,
- gpointer arg_1,
- gpointer arg_2,
- gpointer data2);
- register GMarshalFunc_VOID__POINTER_BOXED callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__POINTER_BOXED) (gpointer data1,
+ gpointer arg1,
+ gpointer arg2,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__POINTER_BOXED callback;
g_return_if_fail (n_param_values == 3);
@@ -371,6 +533,39 @@
}
/* VOID:STRING (./libanjuta-iface-marshallers.list:14) */
+void
+libanjuta_iface_cclosure_marshal_VOID__STRING (GClosure *closure,
+ GValue *return_value G_GNUC_UNUSED,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint G_GNUC_UNUSED,
+ gpointer marshal_data)
+{
+ typedef void (*GMarshalFunc_VOID__STRING) (gpointer data1,
+ gpointer arg1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__STRING callback;
+
+ g_return_if_fail (n_param_values == 2);
+
+ if (G_CCLOSURE_SWAP_DATA (closure))
+ {
+ data1 = closure->data;
+ data2 = g_value_peek_pointer (param_values + 0);
+ }
+ else
+ {
+ data1 = g_value_peek_pointer (param_values + 0);
+ data2 = closure->data;
+ }
+ callback = (GMarshalFunc_VOID__STRING) (marshal_data ? marshal_data : cc->callback);
+
+ callback (data1,
+ g_marshal_value_peek_string (param_values + 1),
+ data2);
+}
/* VOID:STRING,STRING (./libanjuta-iface-marshallers.list:15) */
void
@@ -381,13 +576,13 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__STRING_STRING) (gpointer data1,
- gpointer arg_1,
- gpointer arg_2,
- gpointer data2);
- register GMarshalFunc_VOID__STRING_STRING callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__STRING_STRING) (gpointer data1,
+ gpointer arg1,
+ gpointer arg2,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__STRING_STRING callback;
g_return_if_fail (n_param_values == 3);
@@ -418,14 +613,14 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__STRING_STRING_STRING) (gpointer data1,
- gpointer arg_1,
- gpointer arg_2,
- gpointer arg_3,
- gpointer data2);
- register GMarshalFunc_VOID__STRING_STRING_STRING callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__STRING_STRING_STRING) (gpointer data1,
+ gpointer arg1,
+ gpointer arg2,
+ gpointer arg3,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__STRING_STRING_STRING callback;
g_return_if_fail (n_param_values == 4);
@@ -457,18 +652,18 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__STRING_STRING_STRING_STRING_BOOLEAN_BOOLEAN_STRING) (gpointer data1,
- gpointer arg_1,
- gpointer arg_2,
- gpointer arg_3,
- gpointer arg_4,
- gboolean arg_5,
- gboolean arg_6,
- gpointer arg_7,
- gpointer data2);
- register GMarshalFunc_VOID__STRING_STRING_STRING_STRING_BOOLEAN_BOOLEAN_STRING callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__STRING_STRING_STRING_STRING_BOOLEAN_BOOLEAN_STRING) (gpointer data1,
+ gpointer arg1,
+ gpointer arg2,
+ gpointer arg3,
+ gpointer arg4,
+ gboolean arg5,
+ gboolean arg6,
+ gpointer arg7,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__STRING_STRING_STRING_STRING_BOOLEAN_BOOLEAN_STRING callback;
g_return_if_fail (n_param_values == 8);
@@ -504,13 +699,13 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__UINT_INT) (gpointer data1,
- guint arg_1,
- gint arg_2,
- gpointer data2);
- register GMarshalFunc_VOID__UINT_INT callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__UINT_INT) (gpointer data1,
+ guint arg1,
+ gint arg2,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__UINT_INT callback;
g_return_if_fail (n_param_values == 3);
@@ -541,14 +736,14 @@
gpointer invocation_hint G_GNUC_UNUSED,
gpointer marshal_data)
{
- typedef void (*GMarshalFunc_VOID__ULONG_STRING_UINT) (gpointer data1,
- gulong arg_1,
- gpointer arg_2,
- guint arg_3,
- gpointer data2);
- register GMarshalFunc_VOID__ULONG_STRING_UINT callback;
- register GCClosure *cc = (GCClosure*) closure;
- register gpointer data1, data2;
+ typedef void (*GMarshalFunc_VOID__ULONG_STRING_UINT) (gpointer data1,
+ gulong arg1,
+ gpointer arg2,
+ guint arg3,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__ULONG_STRING_UINT callback;
g_return_if_fail (n_param_values == 4);
@@ -572,4 +767,35 @@
}
/* VOID:VOID (./libanjuta-iface-marshallers.list:20) */
+void
+libanjuta_iface_cclosure_marshal_VOID__VOID (GClosure *closure,
+ GValue *return_value G_GNUC_UNUSED,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint G_GNUC_UNUSED,
+ gpointer marshal_data)
+{
+ typedef void (*GMarshalFunc_VOID__VOID) (gpointer data1,
+ gpointer data2);
+ GCClosure *cc = (GCClosure *) closure;
+ gpointer data1, data2;
+ GMarshalFunc_VOID__VOID callback;
+
+ g_return_if_fail (n_param_values == 1);
+
+ if (G_CCLOSURE_SWAP_DATA (closure))
+ {
+ data1 = closure->data;
+ data2 = g_value_peek_pointer (param_values + 0);
+ }
+ else
+ {
+ data1 = g_value_peek_pointer (param_values + 0);
+ data2 = closure->data;
+ }
+ callback = (GMarshalFunc_VOID__VOID) (marshal_data ? marshal_data : cc->callback);
+
+ callback (data1,
+ data2);
+}
diff -Nru anjuta-3.26.0/libanjuta/interfaces/libanjuta-iface-marshallers.h anjuta-3.28.0/libanjuta/interfaces/libanjuta-iface-marshallers.h
--- anjuta-3.26.0/libanjuta/interfaces/libanjuta-iface-marshallers.h 2014-10-17 19:36:36.000000000 +0000
+++ anjuta-3.28.0/libanjuta/interfaces/libanjuta-iface-marshallers.h 2017-10-26 19:27:03.000000000 +0000
@@ -1,26 +1,28 @@
+/* This file is generated, all changes will be lost */
+#ifndef __LIBANJUTA_IFACE_CCLOSURE_MARSHAL_MARSHAL_H__
+#define __LIBANJUTA_IFACE_CCLOSURE_MARSHAL_MARSHAL_H__
-#ifndef __libanjuta_iface_cclosure_marshal_MARSHAL_H__
-#define __libanjuta_iface_cclosure_marshal_MARSHAL_H__
-
-#include
+#include
G_BEGIN_DECLS
/* BOOLEAN:OBJECT (./libanjuta-iface-marshallers.list:1) */
-extern void libanjuta_iface_cclosure_marshal_BOOLEAN__OBJECT (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_BOOLEAN__OBJECT (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:BOOLEAN,INT (./libanjuta-iface-marshallers.list:2) */
-extern void libanjuta_iface_cclosure_marshal_VOID__BOOLEAN_INT (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_VOID__BOOLEAN_INT (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:BOXED (./libanjuta-iface-marshallers.list:3) */
#define libanjuta_iface_cclosure_marshal_VOID__BOXED g_cclosure_marshal_VOID__BOXED
@@ -32,106 +34,117 @@
#define libanjuta_iface_cclosure_marshal_VOID__INT g_cclosure_marshal_VOID__INT
/* VOID:INT,INT (./libanjuta-iface-marshallers.list:6) */
-extern void libanjuta_iface_cclosure_marshal_VOID__INT_INT (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_VOID__INT_INT (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:INT,INT,ULONG,STRING,UINT (./libanjuta-iface-marshallers.list:7) */
-extern void libanjuta_iface_cclosure_marshal_VOID__INT_INT_ULONG_STRING_UINT (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_VOID__INT_INT_ULONG_STRING_UINT (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:OBJECT (./libanjuta-iface-marshallers.list:8) */
#define libanjuta_iface_cclosure_marshal_VOID__OBJECT g_cclosure_marshal_VOID__OBJECT
/* VOID:OBJECT,BOOLEAN,INT,INT,STRING (./libanjuta-iface-marshallers.list:9) */
-extern void libanjuta_iface_cclosure_marshal_VOID__OBJECT_BOOLEAN_INT_INT_STRING (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_VOID__OBJECT_BOOLEAN_INT_INT_STRING (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:OBJECT,CHAR (./libanjuta-iface-marshallers.list:10) */
-extern void libanjuta_iface_cclosure_marshal_VOID__OBJECT_CHAR (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_VOID__OBJECT_CHAR (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:OBJECT,STRING (./libanjuta-iface-marshallers.list:11) */
-extern void libanjuta_iface_cclosure_marshal_VOID__OBJECT_STRING (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_VOID__OBJECT_STRING (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:POINTER (./libanjuta-iface-marshallers.list:12) */
#define libanjuta_iface_cclosure_marshal_VOID__POINTER g_cclosure_marshal_VOID__POINTER
/* VOID:POINTER,BOXED (./libanjuta-iface-marshallers.list:13) */
-extern void libanjuta_iface_cclosure_marshal_VOID__POINTER_BOXED (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_VOID__POINTER_BOXED (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:STRING (./libanjuta-iface-marshallers.list:14) */
#define libanjuta_iface_cclosure_marshal_VOID__STRING g_cclosure_marshal_VOID__STRING
/* VOID:STRING,STRING (./libanjuta-iface-marshallers.list:15) */
-extern void libanjuta_iface_cclosure_marshal_VOID__STRING_STRING (GClosure *closure,
+extern
+void libanjuta_iface_cclosure_marshal_VOID__STRING_STRING (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
+
+/* VOID:STRING,STRING,STRING (./libanjuta-iface-marshallers.list:16) */
+extern
+void libanjuta_iface_cclosure_marshal_VOID__STRING_STRING_STRING (GClosure *closure,
GValue *return_value,
guint n_param_values,
const GValue *param_values,
gpointer invocation_hint,
gpointer marshal_data);
-/* VOID:STRING,STRING,STRING (./libanjuta-iface-marshallers.list:16) */
-extern void libanjuta_iface_cclosure_marshal_VOID__STRING_STRING_STRING (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
-
/* VOID:STRING,STRING,STRING,STRING,BOOLEAN,BOOLEAN,STRING (./libanjuta-iface-marshallers.list:17) */
-extern void libanjuta_iface_cclosure_marshal_VOID__STRING_STRING_STRING_STRING_BOOLEAN_BOOLEAN_STRING (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_VOID__STRING_STRING_STRING_STRING_BOOLEAN_BOOLEAN_STRING (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:UINT,INT (./libanjuta-iface-marshallers.list:18) */
-extern void libanjuta_iface_cclosure_marshal_VOID__UINT_INT (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_VOID__UINT_INT (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:ULONG,STRING,UINT (./libanjuta-iface-marshallers.list:19) */
-extern void libanjuta_iface_cclosure_marshal_VOID__ULONG_STRING_UINT (GClosure *closure,
- GValue *return_value,
- guint n_param_values,
- const GValue *param_values,
- gpointer invocation_hint,
- gpointer marshal_data);
+extern
+void libanjuta_iface_cclosure_marshal_VOID__ULONG_STRING_UINT (GClosure *closure,
+ GValue *return_value,
+ guint n_param_values,
+ const GValue *param_values,
+ gpointer invocation_hint,
+ gpointer marshal_data);
/* VOID:VOID (./libanjuta-iface-marshallers.list:20) */
#define libanjuta_iface_cclosure_marshal_VOID__VOID g_cclosure_marshal_VOID__VOID
-G_END_DECLS
-#endif /* __libanjuta_iface_cclosure_marshal_MARSHAL_H__ */
+G_END_DECLS
+#endif /* __LIBANJUTA_IFACE_CCLOSURE_MARSHAL_MARSHAL_H__ */
diff -Nru anjuta-3.26.0/m4/gtk-doc.m4 anjuta-3.28.0/m4/gtk-doc.m4
--- anjuta-3.26.0/m4/gtk-doc.m4 2017-08-25 20:43:28.000000000 +0000
+++ anjuta-3.28.0/m4/gtk-doc.m4 2017-12-11 17:57:06.000000000 +0000
@@ -1,4 +1,29 @@
-dnl -*- mode: autoconf -*-
+# -*- mode: autoconf -*-
+#
+# gtk-doc.m4 - configure macro to check for gtk-doc
+# Copyright (C) 2003 James Henstridge
+# 2007-2017 Stefan Sauer
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+#
+# As a special exception, the above copyright owner gives unlimited
+# permission to copy, distribute and modify the configure scripts that
+# are the output of Autoconf when processing the Macro. You need not
+# follow the terms of the GNU General Public License when using or
+# distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
# serial 2
diff -Nru anjuta-3.26.0/Makefile.am anjuta-3.28.0/Makefile.am
--- anjuta-3.26.0/Makefile.am 2017-09-10 19:00:57.000000000 +0000
+++ anjuta-3.28.0/Makefile.am 2017-11-08 20:07:33.000000000 +0000
@@ -37,7 +37,7 @@
gnomemenu_DATA = $(gnomemenu_premerge_file:.desktop.in=.desktop)
@INTLTOOL_XML_RULE@
-appdatadir = $(datadir)/appdata
+appdatadir = $(datadir)/metainfo
appdata_DATA = $(appdata_in_files:.xml.in=.xml)
appdata_in_files = anjuta.appdata.xml.in
diff -Nru anjuta-3.26.0/Makefile.in anjuta-3.28.0/Makefile.in
--- anjuta-3.26.0/Makefile.in 2017-09-10 19:41:45.000000000 +0000
+++ anjuta-3.28.0/Makefile.in 2018-03-11 15:34:25.000000000 +0000
@@ -526,7 +526,7 @@
gnomemenudir = $(datadir)/applications
gnomemenu_premerge_file = anjuta.desktop.in
gnomemenu_DATA = $(gnomemenu_premerge_file:.desktop.in=.desktop)
-appdatadir = $(datadir)/appdata
+appdatadir = $(datadir)/metainfo
appdata_DATA = $(appdata_in_files:.xml.in=.xml)
appdata_in_files = anjuta.appdata.xml.in
DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc
diff -Nru anjuta-3.26.0/manuals/anjuta-build-tutorial/C/index.docbook anjuta-3.28.0/manuals/anjuta-build-tutorial/C/index.docbook
--- anjuta-3.26.0/manuals/anjuta-build-tutorial/C/index.docbook 2017-08-19 12:58:02.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-build-tutorial/C/index.docbook 2018-03-04 12:44:12.000000000 +0000
@@ -331,7 +331,7 @@
target: prerequisitescommands
- …
+ ...
The target and the
prerequisites are normally files but they could be
@@ -561,7 +561,7 @@
As Anjuta is using Autotools,
the first step is similar, you need to run configure.
Select Build
- Configure Project…, to get the
+ Configure Project..., to get the
following dialog:
+ (ProjectAdd Source File...).
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/cs/cs.po anjuta-3.28.0/manuals/anjuta-faqs/cs/cs.po
--- anjuta-3.26.0/manuals/anjuta-faqs/cs/cs.po 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/cs/cs.po 2018-03-11 12:37:48.000000000 +0000
@@ -0,0 +1,316 @@
+# Czech translation for anjuta.
+# Copyright (C) 2018 anjuta's COPYRIGHT HOLDER
+# This file is distributed under the same license as the anjuta package.
+# Marek Černocký , 2018.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: anjuta master\n"
+"POT-Creation-Date: 2018-02-23 18:30+0000\n"
+"PO-Revision-Date: 2018-03-10 21:52+0100\n"
+"Last-Translator: Marek Černocký \n"
+"Language-Team: čeština \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: cs\n"
+"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+#. Put one translator per line, in the form NAME , YEAR1, YEAR2
+msgctxt "_"
+msgid "translator-credits"
+msgstr "Marek Černocký "
+
+#. (itstool) path: info/desc
+#: C/index.page:6
+msgid "Frequently asked questions"
+msgstr "Časté dotazy a odpovědi"
+
+#. (itstool) path: credit/name
+#: C/index.page:10 C/editor-maximize.page:12 C/general-bugs.page:11
+#: C/general-feature.page:11 C/general-name.page:10 C/general-windows.page:11
+msgid "GNOME Documentation Project"
+msgstr "Dokumentační projekt GNOME"
+
+#. (itstool) path: credit/name
+#: C/index.page:14 C/editor-maximize.page:16 C/general-bugs.page:15
+#: C/general-feature.page:15 C/general-name.page:14 C/general-windows.page:15
+msgid "Andy Piper"
+msgstr "Andy Piper"
+
+#. (itstool) path: credit/name
+#: C/index.page:17 C/editor-maximize.page:19 C/general-bugs.page:18
+#: C/general-feature.page:18 C/general-name.page:17 C/general-windows.page:18
+msgid "Naba Kumar"
+msgstr "Naba Kumar"
+
+#. (itstool) path: credit/name
+#: C/index.page:21 C/editor-maximize.page:23 C/general-bugs.page:22
+#: C/general-feature.page:22 C/general-name.page:21 C/general-windows.page:22
+msgid "Biswapesh Chattopadhyayr"
+msgstr "Biswapesh Chattopadhyayr"
+
+#. (itstool) path: page/title
+#: C/index.page:24
+msgid "Anjuta FAQ"
+msgstr "Časté dotazy a odpovědi k projektu Anjuta"
+
+#. (itstool) path: section/title
+#: C/index.page:28
+msgid "General"
+msgstr "Obecné"
+
+#. (itstool) path: section/title
+#: C/index.page:32
+msgid "Editor"
+msgstr "Editor"
+
+#. (itstool) path: section/title
+#: C/index.page:36
+msgid "Project"
+msgstr "Projekt"
+
+#. (itstool) path: info/desc
+#: C/editor-goto-error.page:10
+msgid "Double click on the message."
+msgstr "Klikněte dvojitě na zprávu."
+
+#. (itstool) path: credit/name
+#: C/editor-goto-error.page:14 C/editor-scintilla.page:12
+#: C/project-existing.page:11 C/project-resource.page:11
+msgid "Sébastien Granjoux"
+msgstr "Sébastien Granjoux"
+
+#. (itstool) path: page/title
+#: C/editor-goto-error.page:19
+msgid "How to jump to the line causing a build error or warning?"
+msgstr "Jak skočit na řádek, který způsobil chybu nebo varování překladu?"
+
+#. (itstool) path: page/p
+#: C/editor-goto-error.page:21
+msgid ""
+"Normally errors reported by the compiler are highlighted in the message "
+"window pane. Double clicking on an error should open the corresponding file, "
+"if necessary, and move the view to the right position."
+msgstr ""
+"Normálně jsou chyby oznámené kompilátorem zvýrazněny v panelu se zprávami. "
+"Dvojitým kliknutím na chybu by se měl otevřít příslušný soubor, pokud je to "
+"potřeba, a přesunout zobrazení na správné místo."
+
+#. (itstool) path: note/p
+#: C/editor-goto-error.page:26
+msgid ""
+"It can fail if Anjuta is not able to parse the output of the "
+"build program. This is much more common if the output is translated. So, as "
+"a work around, you can uncheck the option Translate messages in "
+"the preferences of the build plugin. The errors and warnings of the compiler "
+"will not be translated but you should be able to jump to the faulty line as "
+"explained above."
+msgstr ""
+"Nemusí se to ale podařit, když Anjuta není schopná zpracovat "
+"výstup ze sestavovacího programu. Což je mnohem pravděpodobnější, když je "
+"výstup přeložený do nějakého národního jazyka. Můžete to obejít tím, že "
+"zrušíte zaškrtnutí volby Překládat zprávy v předvolbách "
+"sestavovacího zásuvného modulu. Chybové zprávy a varování kompilátoru pak "
+"nebudou překládány, ale za to budete moci skočit přímo na chybný řádek, jak "
+"bylo vysvětleno výše."
+
+#. (itstool) path: info/desc
+#: C/editor-maximize.page:8
+msgid "Double click on the current tab."
+msgstr "Klikněte dvojitě na aktuální kartu."
+
+#. (itstool) path: page/title
+#: C/editor-maximize.page:27
+msgid "How to maximize the editor window"
+msgstr "Jak maximalizovat okno s editorem?"
+
+#. (itstool) path: page/p
+#: C/editor-maximize.page:29
+msgid ""
+"Double click on the current tab to maximize the document window. Do the same "
+"again restore the previous state of all docked windows."
+msgstr ""
+"Okno s dokumentem maximalizujete dvojitým kliknutím na aktuální kartu. Když "
+"uděláte to stejné znovu, obnovíte předchozí stav všech zadokovaných oken."
+
+#. (itstool) path: page/title
+#: C/editor-scintilla.page:17
+msgid "How to use Scintilla editor"
+msgstr "Jak používat editor Scintilla?"
+
+#. (itstool) path: page/p
+#: C/editor-scintilla.page:19
+msgid ""
+"Scintilla editor is available "
+"through the package anjuta-extras package which can either be "
+"downloaded from the Anjuta website or installed from the software management "
+"application of your distribution. After you have installed it you will be "
+"prompted to choose an editor and you can set it as the default editor for "
+"this project."
+msgstr ""
+"Editor Scintilla je dostupný "
+"přes balíček anjuta-extras, který buď můžete stáhnout z webu Anjuta, "
+"nebo jej nainstalovat přes správu softwaru ve své distribuci. Po "
+"nainstalování balíčku budete vyzváni k výběru editoru a můžete si editor "
+"Scintilla nastavit jako výchozí pro svůj projekt."
+
+#. (itstool) path: note/p
+#: C/editor-scintilla.page:25
+msgid ""
+"Install anjuta-extras"
+msgstr ""
+"Nainstalovat anjuta-extras"
+
+#. (itstool) path: note/p
+#: C/editor-scintilla.page:31
+msgid "Scintilla Editor is available since Anjuta version 3.2."
+msgstr ""
+"Editor Scintilla Editor je dostupný od verze Anjuty "
+"3.2."
+
+#. (itstool) path: info/desc
+#: C/general-bugs.page:7
+msgid "Use GNOME's issue tracker tool."
+msgstr "Použijte nástroj pro sledování chyb projektu GNOME."
+
+#. (itstool) path: page/title
+#: C/general-bugs.page:26
+msgid "Where to report bugs and enhancement requests"
+msgstr "Kam hlásit chyby a návrhy na vylepšení?"
+
+#. (itstool) path: page/p
+#: C/general-bugs.page:28
+msgid ""
+"Please report bugs and enhancement requests in GNOME Bugzilla."
+msgstr ""
+"Chyby a návrhy na vylepšení hlaste prosím do systému Bugzilla projektu GNOME."
+
+#. (itstool) path: info/desc
+#: C/general-feature.page:7
+msgid "Because nobody has written it yet."
+msgstr "Protože ji zatím nikdo nenapsal."
+
+#. (itstool) path: page/title
+#: C/general-feature.page:26
+msgid "Why does Anjuta not have my favourite feature?"
+msgstr "Proč Anjuta nemá moji oblíbenou funkci?"
+
+#. (itstool) path: page/p
+#: C/general-feature.page:28
+msgid ""
+"Anjuta is free and open source software. You are encouraged to "
+"take the source code"
+"link> and add the features you would like to see. You can also file an enhancement request or send a message to the "
+"development mailing list to discuss your ideas first."
+msgstr ""
+"Anjuta je svobodný software s otevřeným kódem. Neváhejte si vzít zdrojový kód a "
+"přidat do něj funkce, které byste v něm rádi viděli. Můžete také vyplnit žádost o vylepšení nebo poslat zprávu do "
+"vývojářské poštovní konference, aby se váš nápad prodiskutoval."
+
+#. (itstool) path: page/title
+#: C/general-name.page:26
+msgid "What does the name Anjuta stand for?"
+msgstr "Co název Anjuta znamená?"
+
+#. (itstool) path: page/p
+#: C/general-name.page:28
+msgid ""
+"It is not one of those recursive names. Anjuta is the name of the "
+"girlfriend of the founder of this application, Naba Kumar. This application "
+"is dedicated to her."
+msgstr ""
+"Nejedná se o žádný rekurzivní název, jak je u svobodných projektů v oblibě. "
+"Anjuta je jméno přítelkyně zakladatele tohoto projektu, Naba "
+"Kumara. Jedná se o věnování."
+
+#. (itstool) path: info/desc
+#: C/general-windows.page:7
+msgid "It is not planned."
+msgstr "Není to v plánu."
+
+#. (itstool) path: page/title
+#: C/general-windows.page:26
+msgid "Is/will there be Anjuta for Microsoft Windows?"
+msgstr "Existuje/bude existovat Anjuta pro Microsoft Windows?"
+
+#. (itstool) path: page/p
+#: C/general-windows.page:28
+msgid ""
+"There is no native port for Microsoft Windows and most likely there will "
+"never be. However, if you are interested, feel free to contact us."
+msgstr ""
+"Neexistuje nativní port pro Microsoft Windows a s největší pravděpodobností "
+"ani nikdy existovat nebude. Nicméně, pokud máte zájem na něčem takovém "
+"pracovat, neváhejte nás kontaktovat."
+
+#. (itstool) path: info/desc
+#: C/project-existing.page:7
+msgid "Import a project into Anjuta."
+msgstr "Naimportujte projektu do Anjuty."
+
+#. (itstool) path: page/title
+#: C/project-existing.page:16
+msgid "How can I use Anjuta with an existing project?"
+msgstr "Jak mohu Anjutu použít pro můj stávající projekt?"
+
+#. (itstool) path: page/p
+#: C/project-existing.page:18
+msgid ""
+"Run FileNewProject from existing sources"
+"gui>."
+msgstr ""
+"Spusťte SouborNovýProjekt z existujících "
+"zdrojových kódů."
+
+#. (itstool) path: page/p
+#: C/project-existing.page:20
+msgid ""
+"Anjuta has no own project format. It uses already existing "
+"project formats, like Autotools or Makefile. On Linux, the most common "
+"format is Autotools."
+msgstr ""
+"Anjuta nemá žádný vlastní formát projektů. Používá již existují "
+"formáty, jako jsou Autotools nebo Makefile. V Linuxu je nejběžnějším "
+"formátem Autotools. "
+
+#. (itstool) path: info/desc
+#: C/project-resource.page:7
+msgid "Add a folder and a data target."
+msgstr "Přidejte složku a cíl typu data."
+
+#. (itstool) path: page/title
+#: C/project-resource.page:16
+msgid "How to add a directory containing icons to a project"
+msgstr "Jak do projektu přidat složku obsahující ikony?"
+
+#. (itstool) path: page/p
+#: C/project-resource.page:18
+msgid ""
+"In an autotools project, you can add a new directory by creating a folder "
+"(ProjectNew Folder...). Then inside "
+"this folder create a new data target (ProjectNew "
+"Target...) and add the files corresponding to the icons to "
+"this target (ProjectAdd Source File..."
+"guiseq>)."
+msgstr ""
+"V projektu založeném na autotools můžete přidat novou složku vytvořením "
+"složky pomocí ProjektNová složka… Pak "
+"v této složce vytvořte nový cíl typu data (Projekt"
+"gui>Nový cíl… a přidejte do tohoto cíle soubory s "
+"ikonami pomocí ProjektPřidat zdrojový soubor…"
+"guiseq>"
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/cs/editor-goto-error.page anjuta-3.28.0/manuals/anjuta-faqs/cs/editor-goto-error.page
--- anjuta-3.26.0/manuals/anjuta-faqs/cs/editor-goto-error.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/cs/editor-goto-error.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,24 @@
+
+
+
+
+
+
+ Klikněte dvojitě na zprávu.
+
+
+
+ Sébastien Granjoux
+ seb.sfo@free.fr
+
+
+
+ Jak skočit na řádek, který způsobil chybu nebo varování překladu?
+
+
Normálně jsou chyby oznámené kompilátorem zvýrazněny v panelu se zprávami. Dvojitým kliknutím na chybu by se měl otevřít příslušný soubor, pokud je to potřeba, a přesunout zobrazení na správné místo.
+
+
+
Nemusí se to ale podařit, když Anjuta není schopná zpracovat výstup ze sestavovacího programu. Což je mnohem pravděpodobnější, když je výstup přeložený do nějakého národního jazyka. Můžete to obejít tím, že zrušíte zaškrtnutí volby Překládat zprávy v předvolbách sestavovacího zásuvného modulu. Chybové zprávy a varování kompilátoru pak nebudou překládány, ale za to budete moci skočit přímo na chybný řádek, jak bylo vysvětleno výše.
Editor Scintilla je dostupný přes balíček anjuta-extras, který buď můžete stáhnout z webu Anjuta, nebo jej nainstalovat přes správu softwaru ve své distribuci. Po nainstalování balíčku budete vyzváni k výběru editoru a můžete si editor Scintilla nastavit jako výchozí pro svůj projekt.
+
+
+
+
+
Nainstalovat anjuta-extras
+
+
+
+
+
+
Editor Scintilla Editor je dostupný od verze Anjuty 3.2.
+
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/cs/general-bugs.page anjuta-3.28.0/manuals/anjuta-faqs/cs/general-bugs.page
--- anjuta-3.26.0/manuals/anjuta-faqs/cs/general-bugs.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/cs/general-bugs.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,29 @@
+
+
+
+
+
+ Použijte nástroj pro sledování chyb projektu GNOME.
+
+
+
+ Dokumentační projekt GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Kam hlásit chyby a návrhy na vylepšení?
+
+
Chyby a návrhy na vylepšení hlaste prosím do systému Bugzilla projektu GNOME.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/cs/general-feature.page anjuta-3.28.0/manuals/anjuta-faqs/cs/general-feature.page
--- anjuta-3.26.0/manuals/anjuta-faqs/cs/general-feature.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/cs/general-feature.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,29 @@
+
+
+
+
+
+ Protože ji zatím nikdo nenapsal.
+
+
+
+ Dokumentační projekt GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Proč Anjuta nemá moji oblíbenou funkci?
+
+
Anjuta je svobodný software s otevřeným kódem. Neváhejte si vzít zdrojový kód a přidat do něj funkce, které byste v něm rádi viděli. Můžete také vyplnit žádost o vylepšení nebo poslat zprávu do vývojářské poštovní konference, aby se váš nápad prodiskutoval.
Nejedná se o žádný rekurzivní název, jak je u svobodných projektů v oblibě. Anjuta je jméno přítelkyně zakladatele tohoto projektu, Naba Kumara. Jedná se o věnování.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/cs/general-windows.page anjuta-3.28.0/manuals/anjuta-faqs/cs/general-windows.page
--- anjuta-3.26.0/manuals/anjuta-faqs/cs/general-windows.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/cs/general-windows.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,29 @@
+
+
+
+
+
+ Není to v plánu.
+
+
+
+ Dokumentační projekt GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Existuje/bude existovat Anjuta pro Microsoft Windows?
+
+
Neexistuje nativní port pro Microsoft Windows a s největší pravděpodobností ani nikdy existovat nebude. Nicméně, pokud máte zájem na něčem takovém pracovat, neváhejte nás kontaktovat.
Spusťte SouborNovýProjekt z existujících zdrojových kódů.
+
+
Anjuta nemá žádný vlastní formát projektů. Používá již existují formáty, jako jsou Autotools nebo Makefile. V Linuxu je nejběžnějším formátem Autotools.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/cs/project-resource.page anjuta-3.28.0/manuals/anjuta-faqs/cs/project-resource.page
--- anjuta-3.26.0/manuals/anjuta-faqs/cs/project-resource.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/cs/project-resource.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,19 @@
+
+
+
+
+
+ Přidejte složku a cíl typu data.
+
+
+
+ Sébastien Granjoux
+ seb.sfo@free.fr
+
+
+
+ Jak do projektu přidat složku obsahující ikony?
+
+
V projektu založeném na autotools můžete přidat novou složku vytvořením složky pomocí ProjektNová složka… Pak v této složce vytvořte nový cíl typu data (ProjektNový cíl… a přidejte do tohoto cíle soubory s ikonami pomocí ProjektPřidat zdrojový soubor…
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/de/de.po anjuta-3.28.0/manuals/anjuta-faqs/de/de.po
--- anjuta-3.26.0/manuals/anjuta-faqs/de/de.po 2017-08-19 12:58:02.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/de/de.po 2018-03-04 12:36:42.000000000 +0000
@@ -4,224 +4,313 @@
msgid ""
msgstr ""
"Project-Id-Version: anjuta faq\n"
-"POT-Creation-Date: 2012-03-16 23:30+0100\n"
-"PO-Revision-Date: 2012-03-16 23:55+0100\n"
+"POT-Creation-Date: 2018-02-01 20:35+0000\n"
+"PO-Revision-Date: 2018-02-04 17:30+0100\n"
"Last-Translator: Mario Blättermann \n"
"Language-Team: Deutsch \n"
+"Language: de_DE\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Poedit-Language: German\n"
-"X-Poedit-Country: GERMANY\n"
+"X-Generator: Poedit 2.0.6\n"
#. Put one translator per line, in the form NAME , YEAR1, YEAR2
msgctxt "_"
msgid "translator-credits"
-msgstr "Mario Blättermann , 2012"
+msgstr "Mario Blättermann , 2012, 2018"
-#: editor-maximize.page:8(info/desc)
-msgid "Double click on the current tab."
-msgstr "Doppelklicken Sie auf den aktuellen Reiter."
+#. (itstool) path: info/desc
+#: C/index.page:6
+msgid "Frequently asked questions"
+msgstr "Häufig gestellte Fragen"
-#: editor-maximize.page:12(credit/name) general-bugs.page:11(credit/name)
-#: general-feature.page:11(credit/name) general-name.page:10(credit/name)
-#: general-windows.page:11(credit/name) index.page:10(credit/name)
+#. (itstool) path: credit/name
+#: C/index.page:10 C/editor-maximize.page:12 C/general-bugs.page:11
+#: C/general-feature.page:11 C/general-name.page:10 C/general-windows.page:11
msgid "GNOME Documentation Project"
msgstr "GNOME-Dokumentationsprojekt"
-#: editor-maximize.page:16(credit/name) general-bugs.page:15(credit/name)
-#: general-feature.page:15(credit/name) general-name.page:14(credit/name)
-#: general-windows.page:15(credit/name) index.page:14(credit/name)
+#. (itstool) path: credit/name
+#: C/index.page:14 C/editor-maximize.page:16 C/general-bugs.page:15
+#: C/general-feature.page:15 C/general-name.page:14 C/general-windows.page:15
msgid "Andy Piper"
msgstr "Andy Piper"
-#: editor-maximize.page:19(credit/name) general-bugs.page:18(credit/name)
-#: general-feature.page:18(credit/name) general-name.page:17(credit/name)
-#: general-windows.page:18(credit/name) index.page:17(credit/name)
+#. (itstool) path: credit/name
+#: C/index.page:17 C/editor-maximize.page:19 C/general-bugs.page:18
+#: C/general-feature.page:18 C/general-name.page:17 C/general-windows.page:18
msgid "Naba Kumar"
msgstr "Naba Kumar"
-#: editor-maximize.page:23(credit/name) general-bugs.page:22(credit/name)
-#: general-feature.page:22(credit/name) general-name.page:21(credit/name)
-#: general-windows.page:22(credit/name) index.page:21(credit/name)
+#. (itstool) path: credit/name
+#: C/index.page:21 C/editor-maximize.page:23 C/general-bugs.page:22
+#: C/general-feature.page:22 C/general-name.page:21 C/general-windows.page:22
msgid "Biswapesh Chattopadhyayr"
msgstr "Biswapesh Chattopadhyayr"
-#: editor-maximize.page:27(page/title)
-msgid "How to maximize the editor window"
-msgstr "Das Editorfenster maximieren"
+#. (itstool) path: page/title
+#: C/index.page:24
+msgid "Anjuta FAQ"
+msgstr "Anjuta FAQ"
-#: editor-maximize.page:29(page/p)
-msgid ""
-"Double click on the current tab to maximize the document window. Do the same "
-"again restore the previous state of all docked windows."
-msgstr ""
-"Doppelklicken Sie auf den aktuellen Reiter, um das Dokumentenfenster zu "
-"maximieren. Wiederholen Sie dies, um den vorherigen Zustand aller angedockten "
-"Fenster wiederherzustellen."
+#. (itstool) path: section/title
+#: C/index.page:28
+msgid "General"
+msgstr "Allgemein"
+
+#. (itstool) path: section/title
+#: C/index.page:32
+msgid "Editor"
+msgstr "Editor"
-#: editor-scintilla.page:7(info/desc)
-msgid "It is available now."
-msgstr "Jetzt verfügbar."
+#. (itstool) path: section/title
+#: C/index.page:36
+msgid "Project"
+msgstr "Projekt"
-#: editor-scintilla.page:11(credit/name) project-existing.page:11(credit/name)
-#: project-resource.page:11(credit/name)
+#. (itstool) path: info/desc
+#: C/editor-goto-error.page:10
+msgid "Double click on the message."
+msgstr "Doppelklicken Sie auf die Meldung."
+
+#. (itstool) path: credit/name
+#: C/editor-goto-error.page:14 C/editor-scintilla.page:12
+#: C/project-existing.page:11 C/project-resource.page:11
msgid "Sébastien Granjoux"
msgstr "Sébastien Granjoux"
-#: editor-scintilla.page:16(page/title)
-msgid "How to use Scintilla editor"
-msgstr ""
-"Verwendung des Scintilla-Editors"
+#. (itstool) path: page/title
+#: C/editor-goto-error.page:19
+msgid "How to jump to the line causing a build error or warning?"
+msgstr ""
+"Wie springe ich zu einer Zeile, die einen Erstellungsfehler oder eine "
+"Warnung verursacht hat?"
+
+#. (itstool) path: page/p
+#: C/editor-goto-error.page:21
+msgid ""
+"Normally errors reported by the compiler are highlighted in the message "
+"window pane. Double clicking on an error should open the corresponding file, "
+"if necessary, and move the view to the right position."
+msgstr ""
+"Vom Compiler gemeldete normale Fehler werden im Nachrichten-Teilfenster "
+"hervorgehoben. Durch Doppelklick auf einen Fehler wird die entsprechende "
+"Datei geöffnet, falls nötig, und die Ansicht in die richtige Position "
+"verschoben."
+
+#. (itstool) path: note/p
+#: C/editor-goto-error.page:26
+msgid ""
+"It can fail if Anjuta is not able to parse the output of the "
+"build program. This is much more common if the output is translated. So, as "
+"a work around, you can uncheck the option Translate messages in "
+"the preferences of the build plugin. The errors and warnings of the compiler "
+"will not be translated but you should be able to jump to the faulty line as "
+"explained above."
+msgstr ""
+"Es kann fehlschlagen, wenn Anjuta die Ausgabe des "
+"Erstellungsprogramms nicht auswerten kann. Dies kommt häufiger vor, wenn die "
+"Ausgabe lokalisiert ist. Sie können als Workaround die Option "
+"Nachrichten übersetzen in den Einstellungen des Erstellungs-"
+"Plugins deaktivieren. Die Fehlermeldungen und Warnungen des Compilers werden "
+"dann nicht übersetzt, aber Sie sollten dann zu der den Fehler verursachenden "
+"Zeile springen können, wie oben beschrieben."
-#: editor-scintilla.page:18(page/p)
-msgid ""
-"It is available through the anjuta-extras package with can be "
-"download from the anjuta website. After you installed it you will be prompted "
-"to choose an editor and you can set it as the default editor for this project."
-msgstr ""
-"Dieser ist im Paket anjuta-extras verfügbar, das Sie von der "
-"Anjuta-Webseite herunterladen können. Nachdem Sie es installiert haben, "
-"werden Sie gefragt, welchen Editor Sie verwenden wollen, und können diesen "
-"als Standardeditor für dieses Projekt verwenden."
+#. (itstool) path: info/desc
+#: C/editor-maximize.page:8
+msgid "Double click on the current tab."
+msgstr "Doppelklicken Sie auf den aktuellen Reiter."
+
+#. (itstool) path: page/title
+#: C/editor-maximize.page:27
+msgid "How to maximize the editor window"
+msgstr "Das Editorfenster maximieren"
-#: editor-scintilla.page:23(note/p)
+#. (itstool) path: page/p
+#: C/editor-maximize.page:29
msgid ""
-"The scintilla editor was not available in Anjuta 3.0 but it is now available "
-"since Anjuta 3.1."
+"Double click on the current tab to maximize the document window. Do the same "
+"again restore the previous state of all docked windows."
msgstr ""
-"Der Scintilla-Editor war für Anjuta 3.0 nicht erhältlich, ist aber seit "
-"Anjuta 3.1 wieder verfügbar."
-
-#: general-bugs.page:7(info/desc)
-msgid "Use GNOME bugzilla."
-msgstr "Verwenden Sie GNOME Bugzilla."
+"Doppelklicken Sie auf den aktuellen Reiter, um das Dokumentenfenster zu "
+"maximieren. Wiederholen Sie dies, um den vorherigen Zustand aller "
+"angedockten Fenster wiederherzustellen."
-#: general-bugs.page:26(page/title)
-msgid "Where can I report bugs"
-msgstr "Wo kann ich Fehler melden?"
+#. (itstool) path: page/title
+#: C/editor-scintilla.page:17
+msgid "How to use Scintilla editor"
+msgstr "Verwendung des Scintilla-Editors"
+
+#. (itstool) path: page/p
+#: C/editor-scintilla.page:19
+msgid ""
+"Scintilla editor is available "
+"through the package anjuta-extras package which can either be "
+"downloaded from the Anjuta website or installed from the software management "
+"application of your distribution. After you have installed it you will be "
+"prompted to choose an editor and you can set it as the default editor for "
+"this project."
+msgstr ""
+"Der Scintilla-Editor ist im "
+"Paket anjuta-extras verfügbar, das Sie von der Anjuta-Webseite "
+"herunterladen oder über die Softwareverwaltung Ihrer Distribution "
+"installieren können. Nachdem Sie es installiert haben, werden Sie gefragt, "
+"welchen Editor Sie verwenden wollen, und können diesen als Standardeditor "
+"für dieses Projekt verwenden."
+
+#. (itstool) path: note/p
+#: C/editor-scintilla.page:25
+msgid ""
+"Install anjuta-extras"
+msgstr ""
+"anjuta-extras installieren"
+
+#. (itstool) path: note/p
+#: C/editor-scintilla.page:31
+msgid "Scintilla Editor is available since Anjuta version 3.2."
+msgstr ""
+"Der Scintilla-Editor ist in Anjuta seit Version 3.2 verfügbar."
+
+#. (itstool) path: info/desc
+#: C/general-bugs.page:7
+msgid "Use GNOME's issue tracker tool."
+msgstr "Verwenden Sie das Fehlererfassungssystem von GNOME."
+
+#. (itstool) path: page/title
+#: C/general-bugs.page:26
+msgid "Where to report bugs and enhancement requests"
+msgstr "Melden von Fehlern und Verbesserungsanfragen"
-#: general-bugs.page:28(page/p)
+#. (itstool) path: page/p
+#: C/general-bugs.page:28
msgid ""
-"Please report bugs in GNOME Bugzilla."
+"Please report bugs and enhancement requests in GNOME Bugzilla."
msgstr ""
"Bitte melden Sie Fehler im Fehlererfassungssystem von GNOME."
-#: general-feature.page:7(info/desc)
-msgid "You are encouraged to do it yourself."
-msgstr "Sie sind herzlich eingeladen, dies selbst zu tun."
-
-#: general-feature.page:26(page/title)
-msgid "Why doesn't Anjuta have my favourite XYZ feature?"
-msgstr "Warum hat Anjuta mein Lieblings-Funktionsmerkmal XYZ nicht?"
-
-#: general-feature.page:28(page/p)
-msgid ""
-"Because you haven't added them ? This is free software. You are free to, even "
-"encouraged to take the source code and add the features you need. If you "
-"don't think yourself to be capable of doing that, file a request for "
-"enhancement or send a mail to the devel list."
-msgstr ""
-"Vielleicht weil Sie es nicht hinzugefügt haben...? Dies ist freie Software. "
-"Es steht Ihnen frei und ist ausdrücklich erwünscht, den Quellcode zu "
-"bearbeiten und die von Ihnen benötigten Funktionsmerkmale hinzuzufügen. Wenn "
-"Sie meinen, dass Sie sich das zutrauen können, senden Sie einen "
-"Verbesserungsvorschlag in Bugzilla oder schreiben Sie eine E-Mail an die "
-"Mailingliste der Entwickler."
+#. (itstool) path: info/desc
+#: C/general-feature.page:7
+msgid "Because nobody has written it yet."
+msgstr "Weil niemand es bisher geschrieben hat."
+
+#. (itstool) path: page/title
+#: C/general-feature.page:26
+msgid "Why does Anjuta not have my favourite feature?"
+msgstr "Warum hat Anjuta mein Lieblings-Funktionsmerkmal nicht?"
+
+#. (itstool) path: page/p
+#: C/general-feature.page:28
+msgid ""
+"Anjuta is free and open source software. You are encouraged to "
+"take the source code"
+"link> and add the features you would like to see. You can also file an enhancement request or send a message to the "
+"development mailing list to discuss your ideas first."
+msgstr ""
+"Anjuta ist freie und quelloffene Software. Sie sind herzlich "
+"eingeladen, den Quellcode zu nehmen und die gewünschten Funktionsmerkmale "
+"hinzuzufügen. Sie können auch eine Verbesserungsanfrage einreichen oder eine Nachricht an die Mailingliste der Entwickler senden, um dort zunächst über Ihre "
+"Ideen zu diskutieren."
-#: general-name.page:26(page/title)
+#. (itstool) path: page/title
+#: C/general-name.page:26
msgid "What does the name Anjuta stand for?"
msgstr "Wofür steht der Name Anjuta?"
-#: general-name.page:28(page/p)
+#. (itstool) path: page/p
+#: C/general-name.page:28
msgid ""
-"It is not one of those recursive names. Anjuta is the name of Naba "
-"Kumar's (founder) girlfriend. This software is dedicated to her."
+"It is not one of those recursive names. Anjuta is the name of the "
+"girlfriend of the founder of this application, Naba Kumar. This application "
+"is dedicated to her."
msgstr ""
"Es handelt sich dabei nicht um eine der häufig anzutreffenden rekursiven "
-"Abkürzungen. Anjuta ist der Name von Naba Kumars (früherer) "
-"Freundin. Diese Software ist ihr gewidmet."
+"Abkürzungen. Anjuta ist der Name von Naba Kumars Freundin. Diese "
+"Software ist ihr gewidmet."
-#: general-windows.page:7(info/desc)
+#. (itstool) path: info/desc
+#: C/general-windows.page:7
msgid "It is not planned."
msgstr "Das ist nicht geplant."
-#: general-windows.page:26(page/title)
-msgid "Is here/will there ever be Anjuta for MS Windows?"
-msgstr "Gibt es Anjuta for MS Windows oder wird es das jemals geben?"
-
-#: general-windows.page:28(page/p)
-msgid ""
-"There is no native port for Windows and it most likely won't ever be. "
-"However, if you are interested, feel free to contact us."
-msgstr ""
-"Es gibt keine Portierung für Windows, und es ist unwahrscheinlich, das es "
-"jemals eine solche Version geben wird. Falls Die dennoch daran interessiert "
-"sind, nehmen Sie Kontakt mit uns auf."
-
-#: index.page:6(info/desc)
-msgid "Frequently asked questions"
-msgstr "Häufig gestellte Fragen"
-
-#: index.page:24(page/title)
-msgid "FAQ"
-msgstr "FAQ"
-
-#: index.page:28(section/title)
-msgid "General"
-msgstr "Allgemein"
-
-#: index.page:32(section/title)
-msgid "Editor"
-msgstr "Editor"
-
-#: index.page:36(section/title)
-msgid "Project"
-msgstr "Projekt"
-
-#: project-existing.page:7(info/desc)
-msgid "Simply import the project in Anjuta."
-msgstr "Importieren Sie einfach ein Projekt in Anjuta."
-
-#: project-existing.page:16(page/title)
-msgid "How can I use anjuta with an existing project?"
+#. (itstool) path: page/title
+#: C/general-windows.page:26
+msgid "Is/will there be Anjuta for Microsoft Windows?"
+msgstr ""
+"Gibt es Anjuta for MS Windows oder wird es das jemals geben?"
+
+#. (itstool) path: page/p
+#: C/general-windows.page:28
+msgid ""
+"There is no native port for Microsoft Windows and most likely there will "
+"never be. However, if you are interested, feel free to contact us."
+msgstr ""
+"Es gibt keine native Portierung für Windows, und es ist unwahrscheinlich, "
+"das es jemals eine solche Version geben wird. Falls Die dennoch daran "
+"interessiert sind, nehmen Sie Kontakt mit uns auf."
+
+#. (itstool) path: info/desc
+#: C/project-existing.page:7
+msgid "Import a project into Anjuta."
+msgstr "Importieren Sie ein Projekt in Anjuta."
+
+#. (itstool) path: page/title
+#: C/project-existing.page:16
+msgid "How can I use Anjuta with an existing project?"
msgstr "Wie kann ich Anjuta für ein existierendes Projekt verwenden?"
-#: project-existing.page:18(page/p)
+#. (itstool) path: page/p
+#: C/project-existing.page:18
msgid ""
-"Just run FileNewProject from existing "
-"sources."
+"Run FileNewProject from existing sources"
+"gui>."
msgstr ""
-"Wählen Sie DateiNeuProjekt aus vorhandenen "
-"Quellen."
+"Wählen Sie DateiNeuProjekt aus "
+"vorhandenen Quellen."
-#: project-existing.page:20(page/p)
+#. (itstool) path: page/p
+#: C/project-existing.page:20
msgid ""
-"Anjuta has not its own project format and uses already existing "
-"project format, like autotools or makefile. On Linux, the most common format "
-"is autotools and it is supported quite well."
+"Anjuta has no own project format. It uses already existing "
+"project formats, like Autotools or Makefile. On Linux, the most common "
+"format is Autotools."
msgstr ""
-"Anjuta hat kein eigenes Projektformat und nutzt bereits vorhandene "
-"Formate, wie Autotools oder Makefile. Anter Linux werden die Autotools am "
-"häufigsten verwendet und deren Funktionsmerkmale sehr gut unterstützt."
+"Anjuta hat kein eigenes Projektformat und nutzt bereits "
+"vorhandene Formate, wie Autotools oder Makefile. Unter Linux sind die "
+"Autotools das am häufigsten verwendete Format."
-#: project-resource.page:7(info/desc)
+#. (itstool) path: info/desc
+#: C/project-resource.page:7
msgid "Add a folder and a data target."
msgstr "Einen Ordner und ein Datenziel hinzufügen."
-#: project-resource.page:16(page/title)
+#. (itstool) path: page/title
+#: C/project-resource.page:16
msgid "How to add a directory containing icons to a project"
msgstr "Einen Ordner zu einem Projekt hinzufügen, welcher Symbole enthält"
-#: project-resource.page:18(page/p)
+#. (itstool) path: page/p
+#: C/project-resource.page:18
msgid ""
"In an autotools project, you can add a new directory by creating a folder "
"(ProjectNew Folder...). Then inside "
"this folder create a new data target (ProjectNew "
"Target...) and add the files corresponding to the icons to "
-"this target (ProjectNew Source...)."
+"this target (ProjectAdd Source File..."
+"guiseq>)."
msgstr ""
"Fügen Sie in einem Autotools-Projekt einen neuen Ordner hinzu: "
"ProjektNeuer Ordner …. Dann erstellen "
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/de/editor-goto-error.page anjuta-3.28.0/manuals/anjuta-faqs/de/editor-goto-error.page
--- anjuta-3.26.0/manuals/anjuta-faqs/de/editor-goto-error.page 2017-09-10 19:07:41.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/de/editor-goto-error.page 2018-03-11 13:18:40.000000000 +0000
@@ -4,7 +4,7 @@
- Double click on the message.
+ Doppelklicken Sie auf die Meldung.
@@ -15,22 +15,16 @@
Mario Blättermannmario.blaettermann@gmail.com
- 2012
+ 2012, 2018
- How to jump to the line causing a build error or warning?
+ Wie springe ich zu einer Zeile, die einen Erstellungsfehler oder eine Warnung verursacht hat?
-
Normally errors reported by the compiler are highlighted in the message window pane.
- Double clicking on an error should open the corresponding file, if necessary, and move
- the view to the right position.
+
Vom Compiler gemeldete normale Fehler werden im Nachrichten-Teilfenster hervorgehoben. Durch Doppelklick auf einen Fehler wird die entsprechende Datei geöffnet, falls nötig, und die Ansicht in die richtige Position verschoben.
-
It can fail if Anjuta is not able to parse the output of the build
- program. This is much more common if the output is translated. So, as a work around,
- you can uncheck the option Translate messages in the preferences of the
- build plugin. The errors and warnings of the compiler will not be translated but
- you should be able to jump to the faulty line as explained above.
+
Es kann fehlschlagen, wenn Anjuta die Ausgabe des Erstellungsprogramms nicht auswerten kann. Dies kommt häufiger vor, wenn die Ausgabe lokalisiert ist. Sie können als Workaround die Option Nachrichten übersetzen in den Einstellungen des Erstellungs-Plugins deaktivieren. Die Fehlermeldungen und Warnungen des Compilers werden dann nicht übersetzt, aber Sie sollten dann zu der den Fehler verursachenden Zeile springen können, wie oben beschrieben.
Scintilla editor is available through the package anjuta-extras package which can either be downloaded
- from the Anjuta website or installed from the software management application of your distribution. After you have installed it you will be prompted to choose an editor and you can set it as the default editor for this project.
+
Der Scintilla-Editor ist im Paket anjuta-extras verfügbar, das Sie von der Anjuta-Webseite herunterladen oder über die Softwareverwaltung Ihrer Distribution installieren können. Nachdem Sie es installiert haben, werden Sie gefragt, welchen Editor Sie verwenden wollen, und können diesen als Standardeditor für dieses Projekt verwenden.
-
Install anjuta-extras
+
anjuta-extras installieren
-
Scintilla Editor is available since Anjuta version 3.2.
+
Der Scintilla-Editor ist in Anjuta seit Version 3.2 verfügbar.
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/de/general-bugs.page anjuta-3.28.0/manuals/anjuta-faqs/de/general-bugs.page
--- anjuta-3.26.0/manuals/anjuta-faqs/de/general-bugs.page 2017-09-10 19:07:42.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/de/general-bugs.page 2018-03-11 13:18:40.000000000 +0000
@@ -3,7 +3,7 @@
- Use GNOME's issue tracker tool.
+ Verwenden Sie das Fehlererfassungssystem von GNOME.
@@ -24,12 +24,12 @@
Mario Blättermannmario.blaettermann@gmail.com
- 2012
+ 2012, 2018
- Where to report bugs and enhancement requests
+ Melden von Fehlern und Verbesserungsanfragen
-
Please report bugs and enhancement requests in GNOME Bugzilla.
+
Bitte melden Sie Fehler im Fehlererfassungssystem von GNOME.
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/de/general-feature.page anjuta-3.28.0/manuals/anjuta-faqs/de/general-feature.page
--- anjuta-3.26.0/manuals/anjuta-faqs/de/general-feature.page 2017-09-10 19:07:42.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/de/general-feature.page 2018-03-11 13:18:40.000000000 +0000
@@ -3,7 +3,7 @@
- Because nobody has written it yet.
+ Weil niemand es bisher geschrieben hat.
@@ -24,13 +24,12 @@
Mario Blättermannmario.blaettermann@gmail.com
- 2012
+ 2012, 2018
- Why does Anjuta not have my favourite feature?
+ Warum hat Anjuta mein Lieblings-Funktionsmerkmal nicht?
-
Anjuta is free and open source software. You are encouraged
- to take the source code and add the features you would like to see. You can also file an enhancement request or send a message to the development mailing list to discuss your ideas first.
+
Anjuta ist freie und quelloffene Software. Sie sind herzlich eingeladen, den Quellcode zu nehmen und die gewünschten Funktionsmerkmale hinzuzufügen. Sie können auch eine Verbesserungsanfrage einreichen oder eine Nachricht an die Mailingliste der Entwickler senden, um dort zunächst über Ihre Ideen zu diskutieren.
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/de/general-name.page anjuta-3.28.0/manuals/anjuta-faqs/de/general-name.page
--- anjuta-3.26.0/manuals/anjuta-faqs/de/general-name.page 2017-09-10 19:07:42.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/de/general-name.page 2018-03-11 13:18:40.000000000 +0000
@@ -23,15 +23,13 @@
Mario Blättermannmario.blaettermann@gmail.com
- 2012
+ 2012, 2018Wofür steht der Name Anjuta?
-
It is not one of those recursive names.
- Anjuta is the name of the girlfriend of the founder of this application, Naba Kumar.
- This application is dedicated to her.
+
Es handelt sich dabei nicht um eine der häufig anzutreffenden rekursiven Abkürzungen. Anjuta ist der Name von Naba Kumars Freundin. Diese Software ist ihr gewidmet.
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/de/general-windows.page anjuta-3.28.0/manuals/anjuta-faqs/de/general-windows.page
--- anjuta-3.26.0/manuals/anjuta-faqs/de/general-windows.page 2017-09-10 19:07:42.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/de/general-windows.page 2018-03-11 13:18:40.000000000 +0000
@@ -24,13 +24,12 @@
Mario Blättermannmario.blaettermann@gmail.com
- 2012
+ 2012, 2018
- Is/will there be Anjuta for Microsoft Windows?
+ Gibt es Anjuta for MS Windows oder wird es das jemals geben?
-
There is no native port for Microsoft Windows and most likely there will never be.
- However, if you are interested, feel free to contact us.
+
Es gibt keine native Portierung für Windows, und es ist unwahrscheinlich, das es jemals eine solche Version geben wird. Falls Die dennoch daran interessiert sind, nehmen Sie Kontakt mit uns auf.
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/de/index.page anjuta-3.28.0/manuals/anjuta-faqs/de/index.page
--- anjuta-3.26.0/manuals/anjuta-faqs/de/index.page 2017-09-10 19:07:41.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/de/index.page 2018-03-11 13:18:40.000000000 +0000
@@ -22,7 +22,7 @@
Mario Blättermannmario.blaettermann@gmail.com
- 2012
+ 2012, 2018Anjuta FAQ
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/de/project-existing.page anjuta-3.28.0/manuals/anjuta-faqs/de/project-existing.page
--- anjuta-3.26.0/manuals/anjuta-faqs/de/project-existing.page 2017-09-10 19:07:42.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/de/project-existing.page 2018-03-11 13:18:40.000000000 +0000
@@ -3,7 +3,7 @@
- Import a project into Anjuta.
+ Importieren Sie ein Projekt in Anjuta.
@@ -14,16 +14,14 @@
Mario Blättermannmario.blaettermann@gmail.com
- 2012
+ 2012, 2018
- How can I use Anjuta with an existing project?
+ Wie kann ich Anjuta für ein existierendes Projekt verwenden?
-
Run FileNewProject from existing sources.
+
Wählen Sie DateiNeuProjekt aus vorhandenen Quellen.
-
Anjuta has no own project format. It uses already existing
- project formats, like Autotools or Makefile. On Linux, the most common format
- is Autotools.
+
Anjuta hat kein eigenes Projektformat und nutzt bereits vorhandene Formate, wie Autotools oder Makefile. Unter Linux sind die Autotools das am häufigsten verwendete Format.
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/de/project-resource.page anjuta-3.28.0/manuals/anjuta-faqs/de/project-resource.page
--- anjuta-3.26.0/manuals/anjuta-faqs/de/project-resource.page 2017-09-10 19:07:42.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/de/project-resource.page 2018-03-11 13:18:40.000000000 +0000
@@ -14,7 +14,7 @@
Mario Blättermannmario.blaettermann@gmail.com
- 2012
+ 2012, 2018
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/es/editor-goto-error.page anjuta-3.28.0/manuals/anjuta-faqs/es/editor-goto-error.page
--- anjuta-3.26.0/manuals/anjuta-faqs/es/editor-goto-error.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/es/editor-goto-error.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,36 @@
+
+
+
+
+
+
+ Pulse dos veces sobre el mensaje.
+
+
+
+ Sébastien Granjoux
+ seb.sfo@free.fr
+
+
+
+ Daniel Mustieles
+ daniel.mustieles@gmail.com
+ 2018
+
+
+
+ How to jump to the line causing a build error or warning?
+
+
Normally errors reported by the compiler are highlighted in the message window pane.
+ Double clicking on an error should open the corresponding file, if necessary, and move
+ the view to the right position.
+
+
+
It can fail if Anjuta is not able to parse the output of the build
+ program. This is much more common if the output is translated. So, as a work around,
+ you can uncheck the option Translate messages in the preferences of the
+ build plugin. The errors and warnings of the compiler will not be translated but
+ you should be able to jump to the faulty line as explained above.
+
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/es/editor-maximize.page anjuta-3.28.0/manuals/anjuta-faqs/es/editor-maximize.page
--- anjuta-3.26.0/manuals/anjuta-faqs/es/editor-maximize.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/es/editor-maximize.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,37 @@
+
+
+
+
+
+
+ Pulse dos veces en la pestaña actual.
+
+
+
+ Proyecto de Documentación de GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Daniel Mustieles
+ daniel.mustieles@gmail.com
+ 2018
+
+
+
+ Cómo maximizar la ventana del editor
+
+
Double click on the current tab to maximize the document window.
+ Do the same again restore the previous state of all docked windows.
Scintilla editor is available through the package anjuta-extras package which can either be downloaded
+ from the Anjuta website or installed from the software management application of your distribution. After you have installed it you will be prompted to choose an editor and you can set it as the default editor for this project.
+
+
+
+
+
Install anjuta-extras
+
+
+
+
+
+
Scintilla Editor is available since Anjuta version 3.2.
+
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/es/es.po anjuta-3.28.0/manuals/anjuta-faqs/es/es.po
--- anjuta-3.26.0/manuals/anjuta-faqs/es/es.po 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/es/es.po 2018-03-04 12:36:42.000000000 +0000
@@ -0,0 +1,271 @@
+# Spanish translation for anjuta.
+# Copyright (C) 2018 anjuta's COPYRIGHT HOLDER
+# This file is distributed under the same license as the anjuta package.
+# Daniel Mustieles , 2018.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: anjuta master\n"
+"POT-Creation-Date: 2018-02-21 15:04+0000\n"
+"PO-Revision-Date: 2018-02-21 16:07+0100\n"
+"Last-Translator: Daniel Mustieles \n"
+"Language-Team: es \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: es\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Gtranslator 2.91.6\n"
+
+#. Put one translator per line, in the form NAME , YEAR1, YEAR2
+msgctxt "_"
+msgid "translator-credits"
+msgstr "Daniel Mustieles , 2018"
+
+#. (itstool) path: info/desc
+#: C/index.page:6
+msgid "Frequently asked questions"
+msgstr "Preguntas más frecuentes"
+
+#. (itstool) path: credit/name
+#: C/index.page:10 C/editor-maximize.page:12 C/general-bugs.page:11
+#: C/general-feature.page:11 C/general-name.page:10 C/general-windows.page:11
+msgid "GNOME Documentation Project"
+msgstr "Proyecto de Documentación de GNOME"
+
+#. (itstool) path: credit/name
+#: C/index.page:14 C/editor-maximize.page:16 C/general-bugs.page:15
+#: C/general-feature.page:15 C/general-name.page:14 C/general-windows.page:15
+msgid "Andy Piper"
+msgstr "Andy Piper"
+
+#. (itstool) path: credit/name
+#: C/index.page:17 C/editor-maximize.page:19 C/general-bugs.page:18
+#: C/general-feature.page:18 C/general-name.page:17 C/general-windows.page:18
+msgid "Naba Kumar"
+msgstr "Naba Kumar"
+
+#. (itstool) path: credit/name
+#: C/index.page:21 C/editor-maximize.page:23 C/general-bugs.page:22
+#: C/general-feature.page:22 C/general-name.page:21 C/general-windows.page:22
+msgid "Biswapesh Chattopadhyayr"
+msgstr "Biswapesh Chattopadhyayr"
+
+#. (itstool) path: page/title
+#: C/index.page:24
+msgid "Anjuta FAQ"
+msgstr "P+F de Anjuta"
+
+#. (itstool) path: section/title
+#: C/index.page:28
+msgid "General"
+msgstr "General"
+
+#. (itstool) path: section/title
+#: C/index.page:32
+msgid "Editor"
+msgstr "Editor"
+
+#. (itstool) path: section/title
+#: C/index.page:36
+msgid "Project"
+msgstr "Proyecto"
+
+#. (itstool) path: info/desc
+#: C/editor-goto-error.page:10
+msgid "Double click on the message."
+msgstr "Pulse dos veces sobre el mensaje."
+
+#. (itstool) path: credit/name
+#: C/editor-goto-error.page:14 C/editor-scintilla.page:12
+#: C/project-existing.page:11 C/project-resource.page:11
+msgid "Sébastien Granjoux"
+msgstr "Sébastien Granjoux"
+
+#. (itstool) path: page/title
+#: C/editor-goto-error.page:19
+msgid "How to jump to the line causing a build error or warning?"
+msgstr ""
+
+#. (itstool) path: page/p
+#: C/editor-goto-error.page:21
+msgid ""
+"Normally errors reported by the compiler are highlighted in the message "
+"window pane. Double clicking on an error should open the corresponding file, "
+"if necessary, and move the view to the right position."
+msgstr ""
+
+#. (itstool) path: note/p
+#: C/editor-goto-error.page:26
+msgid ""
+"It can fail if Anjuta is not able to parse the output of the "
+"build program. This is much more common if the output is translated. So, as "
+"a work around, you can uncheck the option Translate messages in "
+"the preferences of the build plugin. The errors and warnings of the compiler "
+"will not be translated but you should be able to jump to the faulty line as "
+"explained above."
+msgstr ""
+
+#. (itstool) path: info/desc
+#: C/editor-maximize.page:8
+msgid "Double click on the current tab."
+msgstr "Pulse dos veces en la pestaña actual."
+
+#. (itstool) path: page/title
+#: C/editor-maximize.page:27
+msgid "How to maximize the editor window"
+msgstr "Cómo maximizar la ventana del editor"
+
+#. (itstool) path: page/p
+#: C/editor-maximize.page:29
+msgid ""
+"Double click on the current tab to maximize the document window. Do the same "
+"again restore the previous state of all docked windows."
+msgstr ""
+
+#. (itstool) path: page/title
+#: C/editor-scintilla.page:17
+msgid "How to use Scintilla editor"
+msgstr ""
+
+#. (itstool) path: page/p
+#: C/editor-scintilla.page:19
+msgid ""
+"Scintilla editor is available "
+"through the package anjuta-extras package which can either be "
+"downloaded from the Anjuta website or installed from the software management "
+"application of your distribution. After you have installed it you will be "
+"prompted to choose an editor and you can set it as the default editor for "
+"this project."
+msgstr ""
+
+#. (itstool) path: note/p
+#: C/editor-scintilla.page:25
+msgid ""
+"Install anjuta-extras"
+msgstr ""
+
+#. (itstool) path: note/p
+#: C/editor-scintilla.page:31
+msgid "Scintilla Editor is available since Anjuta version 3.2."
+msgstr ""
+
+#. (itstool) path: info/desc
+#: C/general-bugs.page:7
+msgid "Use GNOME's issue tracker tool."
+msgstr ""
+
+#. (itstool) path: page/title
+#: C/general-bugs.page:26
+msgid "Where to report bugs and enhancement requests"
+msgstr ""
+
+#. (itstool) path: page/p
+#: C/general-bugs.page:28
+msgid ""
+"Please report bugs and enhancement requests in GNOME Bugzilla."
+msgstr ""
+
+#. (itstool) path: info/desc
+#: C/general-feature.page:7
+msgid "Because nobody has written it yet."
+msgstr ""
+
+#. (itstool) path: page/title
+#: C/general-feature.page:26
+msgid "Why does Anjuta not have my favourite feature?"
+msgstr ""
+
+#. (itstool) path: page/p
+#: C/general-feature.page:28
+msgid ""
+"Anjuta is free and open source software. You are encouraged to "
+"take the source code"
+"link> and add the features you would like to see. You can also file an enhancement request or send a message to the "
+"development mailing list to discuss your ideas first."
+msgstr ""
+
+#. (itstool) path: page/title
+#: C/general-name.page:26
+msgid "What does the name Anjuta stand for?"
+msgstr ""
+
+#. (itstool) path: page/p
+#: C/general-name.page:28
+msgid ""
+"It is not one of those recursive names. Anjuta is the name of the "
+"girlfriend of the founder of this application, Naba Kumar. This application "
+"is dedicated to her."
+msgstr ""
+"No es uno de esos nombres recursivos. Anjuta es el nombre de la "
+"novia del creado de esta aplicación, Naba Kumar. Esta aplicación está "
+"dedicada a ella."
+
+#. (itstool) path: info/desc
+#: C/general-windows.page:7
+msgid "It is not planned."
+msgstr "No está planeado."
+
+#. (itstool) path: page/title
+#: C/general-windows.page:26
+msgid "Is/will there be Anjuta for Microsoft Windows?"
+msgstr ""
+
+#. (itstool) path: page/p
+#: C/general-windows.page:28
+msgid ""
+"There is no native port for Microsoft Windows and most likely there will "
+"never be. However, if you are interested, feel free to contact us."
+msgstr ""
+
+#. (itstool) path: info/desc
+#: C/project-existing.page:7
+msgid "Import a project into Anjuta."
+msgstr ""
+
+#. (itstool) path: page/title
+#: C/project-existing.page:16
+msgid "How can I use Anjuta with an existing project?"
+msgstr "¿Cómo puedo usar Anjuta con un proyecto existente?"
+
+#. (itstool) path: page/p
+#: C/project-existing.page:18
+msgid ""
+"Run FileNewProject from existing sources"
+"gui>."
+msgstr ""
+
+#. (itstool) path: page/p
+#: C/project-existing.page:20
+msgid ""
+"Anjuta has no own project format. It uses already existing "
+"project formats, like Autotools or Makefile. On Linux, the most common "
+"format is Autotools."
+msgstr ""
+
+#. (itstool) path: info/desc
+#: C/project-resource.page:7
+msgid "Add a folder and a data target."
+msgstr ""
+
+#. (itstool) path: page/title
+#: C/project-resource.page:16
+msgid "How to add a directory containing icons to a project"
+msgstr "Cómo añadir una carpeta de iconos al proyecto."
+
+#. (itstool) path: page/p
+#: C/project-resource.page:18
+msgid ""
+"In an autotools project, you can add a new directory by creating a folder "
+"(ProjectNew Folder...). Then inside "
+"this folder create a new data target (ProjectNew "
+"Target...) and add the files corresponding to the icons to "
+"this target (ProjectAdd Source File..."
+"guiseq>)."
+msgstr ""
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/es/general-bugs.page anjuta-3.28.0/manuals/anjuta-faqs/es/general-bugs.page
--- anjuta-3.26.0/manuals/anjuta-faqs/es/general-bugs.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/es/general-bugs.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,35 @@
+
+
+
+
+
+ Use GNOME's issue tracker tool.
+
+
+
+ Proyecto de Documentación de GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Daniel Mustieles
+ daniel.mustieles@gmail.com
+ 2018
+
+
+
+ Where to report bugs and enhancement requests
+
+
Please report bugs and enhancement requests in GNOME Bugzilla.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/es/general-feature.page anjuta-3.28.0/manuals/anjuta-faqs/es/general-feature.page
--- anjuta-3.26.0/manuals/anjuta-faqs/es/general-feature.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/es/general-feature.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,36 @@
+
+
+
+
+
+ Because nobody has written it yet.
+
+
+
+ Proyecto de Documentación de GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Daniel Mustieles
+ daniel.mustieles@gmail.com
+ 2018
+
+
+
+ Why does Anjuta not have my favourite feature?
+
+
Anjuta is free and open source software. You are encouraged
+ to take the source code and add the features you would like to see. You can also file an enhancement request or send a message to the development mailing list to discuss your ideas first.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/es/general-name.page anjuta-3.28.0/manuals/anjuta-faqs/es/general-name.page
--- anjuta-3.26.0/manuals/anjuta-faqs/es/general-name.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/es/general-name.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,35 @@
+
+
+
+
+
+
+
+
+ Proyecto de Documentación de GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Daniel Mustieles
+ daniel.mustieles@gmail.com
+ 2018
+
+
+
+
+ What does the name Anjuta stand for?
+
+
No es uno de esos nombres recursivos. Anjuta es el nombre de la novia del creado de esta aplicación, Naba Kumar. Esta aplicación está dedicada a ella.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/es/general-windows.page anjuta-3.28.0/manuals/anjuta-faqs/es/general-windows.page
--- anjuta-3.26.0/manuals/anjuta-faqs/es/general-windows.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/es/general-windows.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,36 @@
+
+
+
+
+
+ No está planeado.
+
+
+
+ Proyecto de Documentación de GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Daniel Mustieles
+ daniel.mustieles@gmail.com
+ 2018
+
+
+
+ Is/will there be Anjuta for Microsoft Windows?
+
+
There is no native port for Microsoft Windows and most likely there will never be.
+ However, if you are interested, feel free to contact us.
Anjuta has no own project format. It uses already existing
+ project formats, like Autotools or Makefile. On Linux, the most common format
+ is Autotools.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/es/project-resource.page anjuta-3.28.0/manuals/anjuta-faqs/es/project-resource.page
--- anjuta-3.26.0/manuals/anjuta-faqs/es/project-resource.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/es/project-resource.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,30 @@
+
+
+
+
+
+ Add a folder and a data target.
+
+
+
+ Sébastien Granjoux
+ seb.sfo@free.fr
+
+
+
+ Daniel Mustieles
+ daniel.mustieles@gmail.com
+ 2018
+
+
+
+ Cómo añadir una carpeta de iconos al proyecto.
+
+
In an autotools project, you can add a new directory by creating a
+ folder (ProjectNew Folder...).
+ Then inside this folder create a new data target
+ (ProjectNew Target...) and
+ add the files corresponding to the icons to this target
+ (ProjectAdd Source File...).
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/Makefile.am anjuta-3.28.0/manuals/anjuta-faqs/Makefile.am
--- anjuta-3.26.0/manuals/anjuta-faqs/Makefile.am 2017-08-19 12:58:02.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/Makefile.am 2018-03-11 12:37:48.000000000 +0000
@@ -14,6 +14,6 @@
project-existing.page \
project-resource.page
-HELP_LINGUAS = de
+HELP_LINGUAS = cs de es pt_BR
-include $(top_srcdir)/git.mk
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/Makefile.in anjuta-3.28.0/manuals/anjuta-faqs/Makefile.in
--- anjuta-3.26.0/manuals/anjuta-faqs/Makefile.in 2017-09-10 19:41:45.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/Makefile.in 2018-03-11 15:34:25.000000000 +0000
@@ -400,7 +400,7 @@
project-existing.page \
project-resource.page
-HELP_LINGUAS = de
+HELP_LINGUAS = cs de es pt_BR
all: all-am
.SUFFIXES:
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/editor-goto-error.page anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/editor-goto-error.page
--- anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/editor-goto-error.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/editor-goto-error.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,30 @@
+
+
+
+
+
+
+ Clique duplo na mensagem.
+
+
+
+ Sébastien Granjoux
+ seb.sfo@free.fr
+
+
+
+ Rafael Fontenelle
+ rafaelff@gnome.org
+ 2018
+
+
+
+ Como pular para a linha causando um erro ou aviso de compilação?
+
+
Normalmente, os erros relatados pelo compilador são destacados no painel da janela de mensagens. Clicar duas vezes em um erro deve abrir o arquivo correspondente, se necessário, e mover a vista para a posição certa.
+
+
+
Pode falhar se Anjuta não conseguir analisar a saída do programa de compilação. Isso é muito mais comum se o resultado for traduzido. Então, como um trabalho ao redor, você pode desmarcar a opção Traduzir mensagens nas preferências do plugin de compilação. Os erros e avisos do compilador não serão traduzidos, mas você poderá pular a linha defeituosa conforme explicado acima.
+
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/editor-maximize.page anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/editor-maximize.page
--- anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/editor-maximize.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/editor-maximize.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,36 @@
+
+
+
+
+
+
+ Realize o clique duplo na aba atual.
+
+
+
+ Projeto de Documentação do GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Rafael Fontenelle
+ rafaelff@gnome.org
+ 2018
+
+
+
+ Como maximizar a janela do editor
+
+
Realize o clique duplo na guia atual para maximizar a janela do documento. Faça o mesmo novamente, restaure o estado anterior de todas as janelas encaixadas.
O editor do Scintilla está disponível no pacote anjuta-extras que pode ser baixado do site do Anjuta ou instalado a partir do aplicativo de gerenciamento de software de sua distribuição. Depois de instalá-lo, você será solicitado a escolher um editor e você pode configurá-lo como editor padrão para este projeto.
+
+
+
+
+
Instalar anjuta-extras
+
+
+
+
+
+
O editor do Scintilla está disponível desde a versão 3.2 do Anjuta.
+
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/general-bugs.page anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/general-bugs.page
--- anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/general-bugs.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/general-bugs.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,35 @@
+
+
+
+
+
+ Use a ferramenta de rastreamento de erros do GNOME.
+
+
+
+ Projeto de Documentação do GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Rafael Fontenelle
+ rafaelff@gnome.org
+ 2018
+
+
+
+ Onde relatar erros e requisições de aprimoramento
+
+
Informe os erros e solicitações de aprimoramento no Bugzilla do GNOME.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/general-feature.page anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/general-feature.page
--- anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/general-feature.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/general-feature.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,35 @@
+
+
+
+
+
+ Por que ninguém o escreveu ainda.
+
+
+
+ Projeto de Documentação do GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Rafael Fontenelle
+ rafaelff@gnome.org
+ 2018
+
+
+
+ Por que o Anjuta não tem meu recurso favorito?
+
+
O Anjuta é um software livre e de código aberto. Você é encorajado a pegar o código fonte e adicionar os recursos que você gostaria de ver. Você também pode enviar uma solicitação de aprimoramento ou enviar uma mensagem para a lista de discussão de desenvolvimento para discutir suas ideias primeiro.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/general-name.page anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/general-name.page
--- anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/general-name.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/general-name.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,35 @@
+
+
+
+
+
+
+
+
+ Projeto de Documentação do GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Rafael Fontenelle
+ rafaelff@gnome.org
+ 2018
+
+
+
+
+ O que o nome Anjuta significa?
+
+
Não é um daqueles nomes recursivos. Anjuta é o nome da namorada do fundador deste aplicativo, Naba Kumar. Esta aplicação é dedicada a ela.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/general-windows.page anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/general-windows.page
--- anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/general-windows.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/general-windows.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,35 @@
+
+
+
+
+
+ Não há planos para isso.
+
+
+
+ Projeto de Documentação do GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Rafael Fontenelle
+ rafaelff@gnome.org
+ 2018
+
+
+
+ Há/haverá um Anjuta para Microsoft Windows?
+
+
Não existe um porte nativo para o Microsoft Windows e, provavelmente, nunca haverá. No entanto, se você estiver interessado, sinta-se à vontade para nos contatar.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/index.page anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/index.page
--- anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/index.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/index.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,43 @@
+
+
+
+ Perguntas frequentes
+
+
+
+ Projeto de Documentação do GNOME
+ gnome-doc-list@gnome.org
+
+
+ Andy Piper
+
+
+ Naba Kumar
+ naba@gnome.org
+
+
+ Biswapesh Chattopadhyayr
+
+
+
+ Rafael Fontenelle
+ rafaelff@gnome.org
+ 2018
+
+
+ FAQ do Anjuta
+
+
+
+ Geral
+
+
+
+ Editor
+
+
+
+ Projeto
+
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/project-existing.page anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/project-existing.page
--- anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/project-existing.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/project-existing.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,27 @@
+
+
+
+
+
+ Importe um projeto para o Anjuta.
+
+
+
+ Sébastien Granjoux
+ seb.sfo@free.fr
+
+
+
+ Rafael Fontenelle
+ rafaelff@gnome.org
+ 2018
+
+
+
+ Como posso usar o Anjuta com um projeto existente?
+
+
Execute ArquivoNovoProjeto a partir de código existente.
+
+
Anjuta não possui um formato de projeto próprio. Ele usa formatos de projetos já existentes, como Autotools ou Makefile. No Linux, o formato mais comum é o Autotools.
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/project-resource.page anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/project-resource.page
--- anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/project-resource.page 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/project-resource.page 2018-03-11 13:18:40.000000000 +0000
@@ -0,0 +1,25 @@
+
+
+
+
+
+ Adicione uma pasta e um alvo de dados.
+
+
+
+ Sébastien Granjoux
+ seb.sfo@free.fr
+
+
+
+ Rafael Fontenelle
+ rafaelff@gnome.org
+ 2018
+
+
+
+ Como adicionar um diretório contendo ícones para um projeto
+
+
Em um projeto de autotools, você pode adicionar um novo diretório criando uma pasta (ProjetoNova pasta…). Então, dentro desta pasta, crie um novo alvo de dados (ProjetoNovo alvo…) e adicione os arquivos correspondentes aos ícones a esse alvo (ProjetoNovo arquivo fonte…).
+
+
diff -Nru anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/pt_BR.po anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/pt_BR.po
--- anjuta-3.26.0/manuals/anjuta-faqs/pt_BR/pt_BR.po 1970-01-01 00:00:00.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-faqs/pt_BR/pt_BR.po 2018-02-10 14:22:14.000000000 +0000
@@ -0,0 +1,315 @@
+# Brazilian Portuguese translation for anjuta.
+# Copyright (C) 2018 anjuta's COPYRIGHT HOLDER
+# This file is distributed under the same license as the anjuta package.
+# Rafael Fontenelle , 2018.
+msgid ""
+msgstr ""
+"Project-Id-Version: anjuta master\n"
+"POT-Creation-Date: 2018-02-01 15:32+0000\n"
+"PO-Revision-Date: 2018-02-01 18:21-0200\n"
+"Last-Translator: Rafael Fontenelle \n"
+"Language-Team: Brazilian Portuguese \n"
+"Language: pt_BR\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"X-Generator: Virtaal 1.0.0-beta1\n"
+
+#. Put one translator per line, in the form NAME , YEAR1, YEAR2
+msgctxt "_"
+msgid "translator-credits"
+msgstr "Rafael Fontenelle , 2018"
+
+#. (itstool) path: info/desc
+#: C/index.page:6
+msgid "Frequently asked questions"
+msgstr "Perguntas frequentes"
+
+#. (itstool) path: credit/name
+#: C/index.page:10 C/editor-maximize.page:12 C/general-bugs.page:11
+#: C/general-feature.page:11 C/general-name.page:10 C/general-windows.page:11
+msgid "GNOME Documentation Project"
+msgstr "Projeto de Documentação do GNOME"
+
+#. (itstool) path: credit/name
+#: C/index.page:14 C/editor-maximize.page:16 C/general-bugs.page:15
+#: C/general-feature.page:15 C/general-name.page:14 C/general-windows.page:15
+msgid "Andy Piper"
+msgstr "Andy Piper"
+
+#. (itstool) path: credit/name
+#: C/index.page:17 C/editor-maximize.page:19 C/general-bugs.page:18
+#: C/general-feature.page:18 C/general-name.page:17 C/general-windows.page:18
+msgid "Naba Kumar"
+msgstr "Naba Kumar"
+
+#. (itstool) path: credit/name
+#: C/index.page:21 C/editor-maximize.page:23 C/general-bugs.page:22
+#: C/general-feature.page:22 C/general-name.page:21 C/general-windows.page:22
+msgid "Biswapesh Chattopadhyayr"
+msgstr "Biswapesh Chattopadhyayr"
+
+#. (itstool) path: page/title
+#: C/index.page:24
+msgid "Anjuta FAQ"
+msgstr "FAQ do Anjuta"
+
+#. (itstool) path: section/title
+#: C/index.page:28
+msgid "General"
+msgstr "Geral"
+
+#. (itstool) path: section/title
+#: C/index.page:32
+msgid "Editor"
+msgstr "Editor"
+
+#. (itstool) path: section/title
+#: C/index.page:36
+msgid "Project"
+msgstr "Projeto"
+
+#. (itstool) path: info/desc
+#: C/editor-goto-error.page:10
+msgid "Double click on the message."
+msgstr "Clique duplo na mensagem."
+
+#. (itstool) path: credit/name
+#: C/editor-goto-error.page:14 C/editor-scintilla.page:12
+#: C/project-existing.page:11 C/project-resource.page:11
+msgid "Sébastien Granjoux"
+msgstr "Sébastien Granjoux"
+
+#. (itstool) path: page/title
+#: C/editor-goto-error.page:19
+msgid "How to jump to the line causing a build error or warning?"
+msgstr "Como pular para a linha causando um erro ou aviso de compilação?"
+
+#. (itstool) path: page/p
+#: C/editor-goto-error.page:21
+msgid ""
+"Normally errors reported by the compiler are highlighted in the message "
+"window pane. Double clicking on an error should open the corresponding file, "
+"if necessary, and move the view to the right position."
+msgstr ""
+"Normalmente, os erros relatados pelo compilador são destacados no painel da "
+"janela de mensagens. Clicar duas vezes em um erro deve abrir o arquivo "
+"correspondente, se necessário, e mover a vista para a posição certa."
+
+#. (itstool) path: note/p
+#: C/editor-goto-error.page:26
+msgid ""
+"It can fail if Anjuta is not able to parse the output of the "
+"build program. This is much more common if the output is translated. So, as "
+"a work around, you can uncheck the option Translate messages in "
+"the preferences of the build plugin. The errors and warnings of the compiler "
+"will not be translated but you should be able to jump to the faulty line as "
+"explained above."
+msgstr ""
+"Pode falhar se Anjuta não conseguir analisar a saída do programa "
+"de compilação. Isso é muito mais comum se o resultado for traduzido. Então, "
+"como um trabalho ao redor, você pode desmarcar a opção Traduzir "
+"mensagens nas preferências do plugin de compilação. Os erros e avisos "
+"do compilador não serão traduzidos, mas você poderá pular a linha defeituosa "
+"conforme explicado acima."
+
+#. (itstool) path: info/desc
+#: C/editor-maximize.page:8
+msgid "Double click on the current tab."
+msgstr "Realize o clique duplo na aba atual."
+
+#. (itstool) path: page/title
+#: C/editor-maximize.page:27
+msgid "How to maximize the editor window"
+msgstr "Como maximizar a janela do editor"
+
+#. (itstool) path: page/p
+#: C/editor-maximize.page:29
+msgid ""
+"Double click on the current tab to maximize the document window. Do the same "
+"again restore the previous state of all docked windows."
+msgstr ""
+"Realize o clique duplo na guia atual para maximizar a janela do documento. "
+"Faça o mesmo novamente, restaure o estado anterior de todas as janelas "
+"encaixadas."
+
+#. (itstool) path: page/title
+#: C/editor-scintilla.page:17
+msgid "How to use Scintilla editor"
+msgstr "Como usar o editor do Scintilla"
+
+#. (itstool) path: page/p
+#: C/editor-scintilla.page:19
+msgid ""
+"Scintilla editor is available "
+"through the package anjuta-extras package which can either be "
+"downloaded from the Anjuta website or installed from the software management "
+"application of your distribution. After you have installed it you will be "
+"prompted to choose an editor and you can set it as the default editor for "
+"this project."
+msgstr ""
+"O editor do Scintilla está "
+"disponível no pacote anjuta-extras que pode ser baixado do site do Anjuta"
+"link> ou instalado a partir do aplicativo de gerenciamento de software de "
+"sua distribuição. Depois de instalá-lo, você será solicitado a escolher um "
+"editor e você pode configurá-lo como editor padrão para este projeto."
+
+#. (itstool) path: note/p
+#: C/editor-scintilla.page:25
+msgid ""
+"Install anjuta-extras"
+msgstr ""
+"Instalar anjuta-extras"
+
+#. (itstool) path: note/p
+#: C/editor-scintilla.page:31
+msgid "Scintilla Editor is available since Anjuta version 3.2."
+msgstr ""
+"O editor do Scintilla está disponível desde a versão 3.2 do "
+"Anjuta."
+
+#. (itstool) path: info/desc
+#: C/general-bugs.page:7
+msgid "Use GNOME's issue tracker tool."
+msgstr "Use a ferramenta de rastreamento de erros do GNOME."
+
+#. (itstool) path: page/title
+#: C/general-bugs.page:26
+msgid "Where to report bugs and enhancement requests"
+msgstr "Onde relatar erros e requisições de aprimoramento"
+
+#. (itstool) path: page/p
+#: C/general-bugs.page:28
+msgid ""
+"Please report bugs and enhancement requests in GNOME Bugzilla."
+msgstr ""
+"Informe os erros e solicitações de aprimoramento no Bugzilla do GNOME."
+
+#. (itstool) path: info/desc
+#: C/general-feature.page:7
+msgid "Because nobody has written it yet."
+msgstr "Por que ninguém o escreveu ainda."
+
+#. (itstool) path: page/title
+#: C/general-feature.page:26
+msgid "Why does Anjuta not have my favourite feature?"
+msgstr "Por que o Anjuta não tem meu recurso favorito?"
+
+#. (itstool) path: page/p
+#: C/general-feature.page:28
+msgid ""
+"Anjuta is free and open source software. You are encouraged to "
+"take the source code"
+"link> and add the features you would like to see. You can also file an enhancement request or send a message to the "
+"development mailing list to discuss your ideas first."
+msgstr ""
+"O Anjuta é um software livre e de código aberto. Você é "
+"encorajado a pegar o "
+"código fonte e adicionar os recursos que você gostaria de ver. Você "
+"também pode enviar uma solicitação de "
+"aprimoramento ou enviar uma mensagem para a lista de discussão de "
+"desenvolvimento para discutir suas ideias primeiro."
+
+#. (itstool) path: page/title
+#: C/general-name.page:26
+msgid "What does the name Anjuta stand for?"
+msgstr "O que o nome Anjuta significa?"
+
+#. (itstool) path: page/p
+#: C/general-name.page:28
+msgid ""
+"It is not one of those recursive names. Anjuta is the name of the "
+"girlfriend of the founder of this application, Naba Kumar. This application "
+"is dedicated to her."
+msgstr ""
+"Não é um daqueles nomes recursivos. Anjuta é o nome da namorada "
+"do fundador deste aplicativo, Naba Kumar. Esta aplicação é dedicada a ela."
+
+#. (itstool) path: info/desc
+#: C/general-windows.page:7
+msgid "It is not planned."
+msgstr "Não há planos para isso."
+
+#. (itstool) path: page/title
+#: C/general-windows.page:26
+msgid "Is/will there be Anjuta for Microsoft Windows?"
+msgstr "Há/haverá um Anjuta para Microsoft Windows?"
+
+#. (itstool) path: page/p
+#: C/general-windows.page:28
+msgid ""
+"There is no native port for Microsoft Windows and most likely there will "
+"never be. However, if you are interested, feel free to contact us."
+msgstr ""
+"Não existe um porte nativo para o Microsoft Windows e, provavelmente, nunca "
+"haverá. No entanto, se você estiver interessado, sinta-se à vontade para "
+"nos "
+"contatar."
+
+#. (itstool) path: info/desc
+#: C/project-existing.page:7
+msgid "Import a project into Anjuta."
+msgstr "Importe um projeto para o Anjuta."
+
+#. (itstool) path: page/title
+#: C/project-existing.page:16
+msgid "How can I use Anjuta with an existing project?"
+msgstr "Como posso usar o Anjuta com um projeto existente?"
+
+#. (itstool) path: page/p
+#: C/project-existing.page:18
+msgid ""
+"Run FileNewProject from existing sources"
+"gui>."
+msgstr ""
+"Execute ArquivoNovoProjeto a partir de "
+"código existente."
+
+#. (itstool) path: page/p
+#: C/project-existing.page:20
+msgid ""
+"Anjuta has no own project format. It uses already existing "
+"project formats, like Autotools or Makefile. On Linux, the most common "
+"format is Autotools."
+msgstr ""
+"Anjuta não possui um formato de projeto próprio. Ele usa formatos "
+"de projetos já existentes, como Autotools ou Makefile. No Linux, o formato "
+"mais comum é o Autotools."
+
+#. (itstool) path: info/desc
+#: C/project-resource.page:7
+msgid "Add a folder and a data target."
+msgstr "Adicione uma pasta e um alvo de dados."
+
+#. (itstool) path: page/title
+#: C/project-resource.page:16
+msgid "How to add a directory containing icons to a project"
+msgstr "Como adicionar um diretório contendo ícones para um projeto"
+
+#. (itstool) path: page/p
+#: C/project-resource.page:18
+msgid ""
+"In an autotools project, you can add a new directory by creating a folder "
+"(ProjectNew Folder...). Then inside "
+"this folder create a new data target (ProjectNew "
+"Target...) and add the files corresponding to the icons to "
+"this target (ProjectAdd Source File..."
+"guiseq>)."
+msgstr ""
+"Em um projeto de autotools, você pode adicionar um novo diretório criando "
+"uma pasta (ProjetoNova pasta…). "
+"Então, dentro desta pasta, crie um novo alvo de dados (Projeto"
+"gui>Novo alvo…) e adicione os arquivos correspondentes "
+"aos ícones a esse alvo (ProjetoNovo arquivo fonte…"
+"gui>)."
diff -Nru anjuta-3.26.0/manuals/anjuta-manual/ca/ca.po anjuta-3.28.0/manuals/anjuta-manual/ca/ca.po
--- anjuta-3.26.0/manuals/anjuta-manual/ca/ca.po 2017-08-19 12:58:02.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-manual/ca/ca.po 2018-02-10 14:22:14.000000000 +0000
@@ -2330,7 +2330,7 @@
"keyseq>"
msgstr ""
"Trieu ExecutaDepura el programa en "
-"el menú principal o premeu MajúsculesF12"
+"el menú principal o premeu MajF12"
"key>"
#: C/debug-run.page:41(note/p)
@@ -3743,7 +3743,7 @@
#: C/project-manager-module-remove.page:33(item/p)
msgid "Confirm the removal. This library will be removed from the target."
-msgstr "Confirmeu la supressió. És suprimirà la biblioteca de l'objectiu."
+msgstr "Confirmeu la supressió. Se suprimirà la biblioteca de l'objectiu."
#: C/project-manager-package-remove.page:9(info/desc)
msgid "Remove a library from a module."
@@ -4188,7 +4188,7 @@
"includes several templates but you can add custom ones and even write your "
"own."
msgstr ""
-"Cada tipus de project correspon a una plantilla. L'Anjuta ja "
+"Cada tipus de projecte correspon a una plantilla. L'Anjuta ja "
"inclou diverses plantilles, però podeu afegir-ne de personalitzades o "
"escriure les vostres."
diff -Nru anjuta-3.26.0/manuals/anjuta-manual/ca/debug-run.page anjuta-3.28.0/manuals/anjuta-manual/ca/debug-run.page
--- anjuta-3.26.0/manuals/anjuta-manual/ca/debug-run.page 2017-09-10 19:07:24.000000000 +0000
+++ anjuta-3.28.0/manuals/anjuta-manual/ca/debug-run.page 2018-03-11 13:18:38.000000000 +0000
@@ -43,7 +43,7 @@
-
Trieu ExecutaDepura el programa en el menú principal o premeu MajúsculesF12
+
Trieu ExecutaDepura el programa en el menú principal o premeu MajF12
A la vista de projecte, trieu la biblioteca que voleu suprimir, feu clic amb el botó secundari del ratolí perquè es mostri el menú contextual del projecte i trieu Suprimeix.
-
Confirmeu la supressió. És suprimirà la biblioteca de l'objectiu.
+
Confirmeu la supressió. Se suprimirà la biblioteca de l'objectiu.
Cada tipus de project correspon a una plantilla. L'Anjuta ja inclou diverses plantilles, però podeu afegir-ne de personalitzades o escriure les vostres.
+
Cada tipus de projecte correspon a una plantilla. L'Anjuta ja inclou diverses plantilles, però podeu afegir-ne de personalitzades o escriure les vostres.