diff -u ddccontrol-db-20061014/debian/control ddccontrol-db-20061014/debian/control --- ddccontrol-db-20061014/debian/control +++ ddccontrol-db-20061014/debian/control @@ -11,8 +11,8 @@ Package: ddccontrol-db Architecture: all -Depends: -Recommends: ddccontrol [i386 amd64 ia64 alpha arm armel] +Depends: ${misc:Depends} +Recommends: ddccontrol Description: monitor database for ddccontrol Database of monitors used by ddccontrol. This is mostly useless without ddccontrol. diff -u ddccontrol-db-20061014/debian/changelog ddccontrol-db-20061014/debian/changelog --- ddccontrol-db-20061014/debian/changelog +++ ddccontrol-db-20061014/debian/changelog @@ -1,3 +1,12 @@ +ddccontrol-db (20061014-4) unstable; urgency=low + + * QA upload + * Removed useless architecture specification in Recommends on ddccontrol + (closes: #581301) + * Added dependency on ${misc:Depends}. + + -- Ralf Treinen Wed, 12 May 2010 21:27:47 +0200 + ddccontrol-db (20061014-3) unstable; urgency=low * Orphaning this package. Maintainer set to Debian QA Group. only in patch2: unchanged: --- ddccontrol-db-20061014.orig/intltool-merge +++ ddccontrol-db-20061014/intltool-merge @@ -0,0 +1,1356 @@ +#!/usr/bin/perl -w +# -*- Mode: perl; indent-tabs-mode: nil; c-basic-offset: 4 -*- + +# +# The Intltool Message Merger +# +# Copyright (C) 2000, 2003 Free Software Foundation. +# Copyright (C) 2000, 2001 Eazel, Inc +# +# Intltool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# version 2 published by the Free Software Foundation. +# +# Intltool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. +# +# Authors: Maciej Stachowiak +# Kenneth Christiansen +# Darin Adler +# +# Proper XML UTF-8'ification written by Cyrille Chepelov +# + +## Release information +my $PROGRAM = "intltool-merge"; +my $PACKAGE = "intltool"; +my $VERSION = "0.34.2"; + +## Loaded modules +use strict; +use Getopt::Long; +use Text::Wrap; +use File::Basename; + +my $must_end_tag = -1; +my $last_depth = -1; +my $translation_depth = -1; +my @tag_stack = (); +my @entered_tag = (); +my @translation_strings = (); +my $leading_space = ""; + +## Scalars used by the option stuff +my $HELP_ARG = 0; +my $VERSION_ARG = 0; +my $BA_STYLE_ARG = 0; +my $XML_STYLE_ARG = 0; +my $KEYS_STYLE_ARG = 0; +my $DESKTOP_STYLE_ARG = 0; +my $SCHEMAS_STYLE_ARG = 0; +my $RFC822DEB_STYLE_ARG = 0; +my $QUIET_ARG = 0; +my $PASS_THROUGH_ARG = 0; +my $UTF8_ARG = 0; +my $MULTIPLE_OUTPUT = 0; +my $cache_file; + +## Handle options +GetOptions +( + "help" => \$HELP_ARG, + "version" => \$VERSION_ARG, + "quiet|q" => \$QUIET_ARG, + "oaf-style|o" => \$BA_STYLE_ARG, ## for compatibility + "ba-style|b" => \$BA_STYLE_ARG, + "xml-style|x" => \$XML_STYLE_ARG, + "keys-style|k" => \$KEYS_STYLE_ARG, + "desktop-style|d" => \$DESKTOP_STYLE_ARG, + "schemas-style|s" => \$SCHEMAS_STYLE_ARG, + "rfc822deb-style|r" => \$RFC822DEB_STYLE_ARG, + "pass-through|p" => \$PASS_THROUGH_ARG, + "utf8|u" => \$UTF8_ARG, + "multiple-output|m" => \$MULTIPLE_OUTPUT, + "cache|c=s" => \$cache_file + ) or &error; + +my $PO_DIR; +my $FILE; +my $OUTFILE; + +my %po_files_by_lang = (); +my %translations = (); +my $iconv = $ENV{"ICONV"} || $ENV{"INTLTOOL_ICONV"} || "/usr/bin/iconv"; +my $devnull = ($^O eq 'MSWin32' ? 'NUL:' : '/dev/null'); + +# Use this instead of \w for XML files to handle more possible characters. +my $w = "[-A-Za-z0-9._:]"; + +# XML quoted string contents +my $q = "[^\\\"]*"; + +## Check for options. + +if ($VERSION_ARG) +{ + &print_version; +} +elsif ($HELP_ARG) +{ + &print_help; +} +elsif ($BA_STYLE_ARG && @ARGV > 2) +{ + &utf8_sanity_check; + &preparation; + &print_message; + &ba_merge_translations; + &finalize; +} +elsif ($XML_STYLE_ARG && @ARGV > 2) +{ + &utf8_sanity_check; + &preparation; + &print_message; + &xml_merge_output; + &finalize; +} +elsif ($KEYS_STYLE_ARG && @ARGV > 2) +{ + &utf8_sanity_check; + &preparation; + &print_message; + &keys_merge_translations; + &finalize; +} +elsif ($DESKTOP_STYLE_ARG && @ARGV > 2) +{ + &utf8_sanity_check; + &preparation; + &print_message; + &desktop_merge_translations; + &finalize; +} +elsif ($SCHEMAS_STYLE_ARG && @ARGV > 2) +{ + &utf8_sanity_check; + &preparation; + &print_message; + &schemas_merge_translations; + &finalize; +} +elsif ($RFC822DEB_STYLE_ARG && @ARGV > 2) +{ + &preparation; + &print_message; + &rfc822deb_merge_translations; + &finalize; +} +else +{ + &print_help; +} + +exit; + +## Sub for printing release information +sub print_version +{ + print <<_EOF_; +${PROGRAM} (${PACKAGE}) ${VERSION} +Written by Maciej Stachowiak, Darin Adler and Kenneth Christiansen. + +Copyright (C) 2000-2003 Free Software Foundation, Inc. +Copyright (C) 2000-2001 Eazel, Inc. +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +_EOF_ + exit; +} + +## Sub for printing usage information +sub print_help +{ + print <<_EOF_; +Usage: ${PROGRAM} [OPTION]... PO_DIRECTORY FILENAME OUTPUT_FILE +Generates an output file that includes some localized attributes from an +untranslated source file. + +Mandatory options: (exactly one must be specified) + -b, --ba-style includes translations in the bonobo-activation style + -d, --desktop-style includes translations in the desktop style + -k, --keys-style includes translations in the keys style + -s, --schemas-style includes translations in the schemas style + -r, --rfc822deb-style includes translations in the RFC822 style + -x, --xml-style includes translations in the standard xml style + +Other options: + -u, --utf8 convert all strings to UTF-8 before merging + (default for everything except RFC822 style) + -p, --pass-through deprecated, does nothing and issues a warning + -m, --multiple-output output one localized file per locale, instead of + a single file containing all localized elements + -c, --cache=FILE specify cache file name + (usually \$top_builddir/po/.intltool-merge-cache) + -q, --quiet suppress most messages + --help display this help and exit + --version output version information and exit + +Report bugs to http://bugzilla.gnome.org/ (product name "$PACKAGE") +or send email to . +_EOF_ + exit; +} + + +## Sub for printing error messages +sub print_error +{ + print STDERR "Try `${PROGRAM} --help' for more information.\n"; + exit; +} + + +sub print_message +{ + print "Merging translations into $OUTFILE.\n" unless $QUIET_ARG; +} + + +sub preparation +{ + $PO_DIR = $ARGV[0]; + $FILE = $ARGV[1]; + $OUTFILE = $ARGV[2]; + + &gather_po_files; + &get_translation_database; +} + +# General-purpose code for looking up translations in .po files + +sub po_file2lang +{ + my ($tmp) = @_; + $tmp =~ s/^.*\/(.*)\.po$/$1/; + return $tmp; +} + +sub gather_po_files +{ + for my $po_file (glob "$PO_DIR/*.po") { + $po_files_by_lang{po_file2lang($po_file)} = $po_file; + } +} + +sub get_local_charset +{ + my ($encoding) = @_; + my $alias_file = $ENV{"G_CHARSET_ALIAS"} || "/usr/lib/charset.alias"; + + # seek character encoding aliases in charset.alias (glib) + + if (open CHARSET_ALIAS, $alias_file) + { + while () + { + next if /^\#/; + return $1 if (/^\s*([-._a-zA-Z0-9]+)\s+$encoding\b/i) + } + + close CHARSET_ALIAS; + } + + # if not found, return input string + + return $encoding; +} + +sub get_po_encoding +{ + my ($in_po_file) = @_; + my $encoding = ""; + + open IN_PO_FILE, $in_po_file or die; + while () + { + ## example: "Content-Type: text/plain; charset=ISO-8859-1\n" + if (/Content-Type\:.*charset=([-a-zA-Z0-9]+)\\n/) + { + $encoding = $1; + last; + } + } + close IN_PO_FILE; + + if (!$encoding) + { + print STDERR "Warning: no encoding found in $in_po_file. Assuming ISO-8859-1\n" unless $QUIET_ARG; + $encoding = "ISO-8859-1"; + } + + system ("$iconv -f $encoding -t UTF-8 <$devnull 2>$devnull"); + if ($?) { + $encoding = get_local_charset($encoding); + } + + return $encoding +} + +sub utf8_sanity_check +{ + print STDERR "Warning: option --pass-through has been removed.\n" if $PASS_THROUGH_ARG; + $UTF8_ARG = 1; +} + +sub get_translation_database +{ + if ($cache_file) { + &get_cached_translation_database; + } else { + &create_translation_database; + } +} + +sub get_newest_po_age +{ + my $newest_age; + + foreach my $file (values %po_files_by_lang) + { + my $file_age = -M $file; + $newest_age = $file_age if !$newest_age || $file_age < $newest_age; + } + + $newest_age = 0 if !$newest_age; + + return $newest_age; +} + +sub create_cache +{ + print "Generating and caching the translation database\n" unless $QUIET_ARG; + + &create_translation_database; + + open CACHE, ">$cache_file" || die; + print CACHE join "\x01", %translations; + close CACHE; +} + +sub load_cache +{ + print "Found cached translation database\n" unless $QUIET_ARG; + + my $contents; + open CACHE, "<$cache_file" || die; + { + local $/; + $contents = ; + } + close CACHE; + %translations = split "\x01", $contents; +} + +sub get_cached_translation_database +{ + my $cache_file_age = -M $cache_file; + if (defined $cache_file_age) + { + if ($cache_file_age <= &get_newest_po_age) + { + &load_cache; + return; + } + print "Found too-old cached translation database\n" unless $QUIET_ARG; + } + + &create_cache; +} + +sub create_translation_database +{ + for my $lang (keys %po_files_by_lang) + { + my $po_file = $po_files_by_lang{$lang}; + + if ($UTF8_ARG) + { + my $encoding = get_po_encoding ($po_file); + + if (lc $encoding eq "utf-8") + { + open PO_FILE, "<$po_file"; + } + else + { + print STDERR "WARNING: $po_file is not in UTF-8 but $encoding, converting...\n" unless $QUIET_ARG;; + + open PO_FILE, "$iconv -f $encoding -t UTF-8 $po_file|"; + } + } + else + { + open PO_FILE, "<$po_file"; + } + + my $nextfuzzy = 0; + my $inmsgid = 0; + my $inmsgstr = 0; + my $msgid = ""; + my $msgstr = ""; + + while () + { + $nextfuzzy = 1 if /^#, fuzzy/; + + if (/^msgid "((\\.|[^\\])*)"/ ) + { + $translations{$lang, $msgid} = $msgstr if $inmsgstr && $msgid && $msgstr; + $msgid = ""; + $msgstr = ""; + + if ($nextfuzzy) { + $inmsgid = 0; + } else { + $msgid = unescape_po_string($1); + $inmsgid = 1; + } + $inmsgstr = 0; + $nextfuzzy = 0; + } + + if (/^msgstr "((\\.|[^\\])*)"/) + { + $msgstr = unescape_po_string($1); + $inmsgstr = 1; + $inmsgid = 0; + } + + if (/^"((\\.|[^\\])*)"/) + { + $msgid .= unescape_po_string($1) if $inmsgid; + $msgstr .= unescape_po_string($1) if $inmsgstr; + } + } + $translations{$lang, $msgid} = $msgstr if $inmsgstr && $msgid && $msgstr; + } +} + +sub finalize +{ +} + +sub unescape_one_sequence +{ + my ($sequence) = @_; + + return "\\" if $sequence eq "\\\\"; + return "\"" if $sequence eq "\\\""; + return "\n" if $sequence eq "\\n"; + return "\r" if $sequence eq "\\r"; + return "\t" if $sequence eq "\\t"; + return "\b" if $sequence eq "\\b"; + return "\f" if $sequence eq "\\f"; + return "\a" if $sequence eq "\\a"; + return chr(11) if $sequence eq "\\v"; # vertical tab, see ascii(7) + + return chr(hex($1)) if ($sequence =~ /\\x([0-9a-fA-F]{2})/); + return chr(oct($1)) if ($sequence =~ /\\([0-7]{3})/); + + # FIXME: Is \0 supported as well? Kenneth and Rodney don't want it, see bug #48489 + + return $sequence; +} + +sub unescape_po_string +{ + my ($string) = @_; + + $string =~ s/(\\x[0-9a-fA-F]{2}|\\[0-7]{3}|\\.)/unescape_one_sequence($1)/eg; + + return $string; +} + +## NOTE: deal with < - < but not > - > because it seems its ok to have +## > in the entity. For further info please look at #84738. +sub entity_decode +{ + local ($_) = @_; + + s/'/'/g; # ' + s/"/"/g; # " + s/&/&/g; + s/</; + close INPUT; + } + + open OUTPUT, ">$OUTFILE" or die "can't open $OUTFILE: $!"; + # Binmode so that selftest works ok if using a native Win32 Perl... + binmode (OUTPUT) if $^O eq 'MSWin32'; + + while ($source =~ s|^(.*?)([ \t]*<\s*$w+\s+($w+\s*=\s*"$q"\s*)+/?>)([ \t]*\n)?||s) + { + print OUTPUT $1; + + my $node = $2 . "\n"; + + my @strings = (); + $_ = $node; + while (s/(\s)_($w+\s*=\s*"($q)")/$1$2/s) { + push @strings, entity_decode($3); + } + print OUTPUT; + + my %langs; + for my $string (@strings) + { + for my $lang (keys %po_files_by_lang) + { + $langs{$lang} = 1 if $translations{$lang, $string}; + } + } + + for my $lang (sort keys %langs) + { + $_ = $node; + s/(\sname\s*=\s*)"($q)"/$1"$2-$lang"/s; + s/(\s)_($w+\s*=\s*")($q)"/$1 . $2 . entity_encoded_translation($lang, $3) . '"'/seg; + print OUTPUT; + } + } + + print OUTPUT $source; + + close OUTPUT; +} + + +## XML (non-bonobo-activation) merge code + + +# Process tag attributes +# Only parameter is a HASH containing attributes -> values mapping +sub getAttributeString +{ + my $sub = shift; + my $do_translate = shift || 0; + my $language = shift || ""; + my $result = ""; + my $translate = shift; + foreach my $e (reverse(sort(keys %{ $sub }))) { + my $key = $e; + my $string = $sub->{$e}; + my $quote = '"'; + + $string =~ s/^[\s]+//; + $string =~ s/[\s]+$//; + + if ($string =~ /^'.*'$/) + { + $quote = "'"; + } + $string =~ s/^['"]//g; + $string =~ s/['"]$//g; + + if ($do_translate && $key =~ /^_/) { + $key =~ s|^_||g; + if ($language) { + # Handle translation + my $decode_string = entity_decode($string); + my $translation = $translations{$language, $decode_string}; + if ($translation) { + $translation = entity_encode($translation); + $string = $translation; + } + $$translate = 2; + } else { + $$translate = 2 if ($translate && (!$$translate)); # watch not to "overwrite" $translate + } + } + + $result .= " $key=$quote$string$quote"; + } + return $result; +} + +# Returns a translatable string from XML node, it works on contents of every node in XML::Parser tree +sub getXMLstring +{ + my $ref = shift; + my $spacepreserve = shift || 0; + my @list = @{ $ref }; + my $result = ""; + + my $count = scalar(@list); + my $attrs = $list[0]; + my $index = 1; + + $spacepreserve = 1 if ((exists $attrs->{"xml:space"}) && ($attrs->{"xml:space"} =~ /^["']?preserve["']?$/)); + $spacepreserve = 0 if ((exists $attrs->{"xml:space"}) && ($attrs->{"xml:space"} =~ /^["']?default["']?$/)); + + while ($index < $count) { + my $type = $list[$index]; + my $content = $list[$index+1]; + if (! $type ) { + # We've got CDATA + if ($content) { + # lets strip the whitespace here, and *ONLY* here + $content =~ s/\s+/ /gs if (!$spacepreserve); + $result .= $content; + } + } elsif ( "$type" ne "1" ) { + # We've got another element + $result .= "<$type"; + $result .= getAttributeString(@{$content}[0], 0); # no nested translatable elements + if ($content) { + my $subresult = getXMLstring($content, $spacepreserve); + if ($subresult) { + $result .= ">".$subresult . ""; + } else { + $result .= "/>"; + } + } else { + $result .= "/>"; + } + } + $index += 2; + } + return $result; +} + +# Translate list of nodes if necessary +sub translate_subnodes +{ + my $fh = shift; + my $content = shift; + my $language = shift || ""; + my $singlelang = shift || 0; + my $spacepreserve = shift || 0; + + my @nodes = @{ $content }; + + my $count = scalar(@nodes); + my $index = 0; + while ($index < $count) { + my $type = $nodes[$index]; + my $rest = $nodes[$index+1]; + if ($singlelang) { + my $oldMO = $MULTIPLE_OUTPUT; + $MULTIPLE_OUTPUT = 1; + traverse($fh, $type, $rest, $language, $spacepreserve); + $MULTIPLE_OUTPUT = $oldMO; + } else { + traverse($fh, $type, $rest, $language, $spacepreserve); + } + $index += 2; + } +} + +sub isWellFormedXmlFragment +{ + my $ret = eval 'require XML::Parser'; + if(!$ret) { + die "You must have XML::Parser installed to run $0\n\n"; + } + + my $fragment = shift; + return 0 if (!$fragment); + + $fragment = "$fragment"; + my $xp = new XML::Parser(Style => 'Tree'); + my $tree = 0; + eval { $tree = $xp->parse($fragment); }; + return $tree; +} + +sub traverse +{ + my $fh = shift; + my $nodename = shift; + my $content = shift; + my $language = shift || ""; + my $spacepreserve = shift || 0; + + if (!$nodename) { + if ($content =~ /^[\s]*$/) { + $leading_space .= $content; + } + print $fh $content; + } else { + # element + my @all = @{ $content }; + my $attrs = shift @all; + my $translate = 0; + my $outattr = getAttributeString($attrs, 1, $language, \$translate); + + if ($nodename =~ /^_/) { + $translate = 1; + $nodename =~ s/^_//; + } + my $lookup = ''; + + $spacepreserve = 0 if ((exists $attrs->{"xml:space"}) && ($attrs->{"xml:space"} =~ /^["']?default["']?$/)); + $spacepreserve = 1 if ((exists $attrs->{"xml:space"}) && ($attrs->{"xml:space"} =~ /^["']?preserve["']?$/)); + + print $fh "<$nodename", $outattr; + if ($translate) { + $lookup = getXMLstring($content, $spacepreserve); + if (!$spacepreserve) { + $lookup =~ s/^\s+//s; + $lookup =~ s/\s+$//s; + } + + if ($lookup || $translate == 2) { + my $translation = $translations{$language, $lookup} if isWellFormedXmlFragment($translations{$language, $lookup}); + if ($MULTIPLE_OUTPUT && ($translation || $translate == 2)) { + $translation = $lookup if (!$translation); + print $fh " xml:lang=\"", $language, "\"" if $language; + print $fh ">"; + if ($translate == 2) { + translate_subnodes($fh, \@all, $language, 1, $spacepreserve); + } else { + print $fh $translation; + } + print $fh ""; + + return; # this means there will be no same translation with xml:lang="$language"... + # if we want them both, just remove this "return" + } else { + print $fh ">"; + if ($translate == 2) { + translate_subnodes($fh, \@all, $language, 1, $spacepreserve); + } else { + print $fh $lookup; + } + print $fh ""; + } + } else { + print $fh "/>"; + } + + for my $lang (sort keys %po_files_by_lang) { + if ($MULTIPLE_OUTPUT && $lang ne "$language") { + next; + } + if ($lang) { + # Handle translation + # + my $translate = 0; + my $localattrs = getAttributeString($attrs, 1, $lang, \$translate); + my $translation = $translations{$lang, $lookup} if isWellFormedXmlFragment($translations{$lang, $lookup}); + if ($translate && !$translation) { + $translation = $lookup; + } + + if ($translation || $translate) { + print $fh "\n"; + $leading_space =~ s/.*\n//g; + print $fh $leading_space; + print $fh "<", $nodename, " xml:lang=\"", $lang, "\"", $localattrs, ">"; + if ($translate == 2) { + translate_subnodes($fh, \@all, $lang, 1, $spacepreserve); + } else { + print $fh $translation; + } + print $fh ""; + } + } + } + + } else { + my $count = scalar(@all); + if ($count > 0) { + print $fh ">"; + my $index = 0; + while ($index < $count) { + my $type = $all[$index]; + my $rest = $all[$index+1]; + traverse($fh, $type, $rest, $language, $spacepreserve); + $index += 2; + } + print $fh ""; + } else { + print $fh "/>"; + } + } + } +} + +sub intltool_tree_comment +{ + my $expat = shift; + my $data = shift; + my $clist = $expat->{Curlist}; + my $pos = $#$clist; + + push @$clist, 1 => $data; +} + +sub intltool_tree_cdatastart +{ + my $expat = shift; + my $clist = $expat->{Curlist}; + my $pos = $#$clist; + + push @$clist, 0 => $expat->original_string(); +} + +sub intltool_tree_cdataend +{ + my $expat = shift; + my $clist = $expat->{Curlist}; + my $pos = $#$clist; + + $clist->[$pos] .= $expat->original_string(); +} + +sub intltool_tree_char +{ + my $expat = shift; + my $text = shift; + my $clist = $expat->{Curlist}; + my $pos = $#$clist; + + # Use original_string so that we retain escaped entities + # in CDATA sections. + # + if ($pos > 0 and $clist->[$pos - 1] eq '0') { + $clist->[$pos] .= $expat->original_string(); + } else { + push @$clist, 0 => $expat->original_string(); + } +} + +sub intltool_tree_start +{ + my $expat = shift; + my $tag = shift; + my @origlist = (); + + # Use original_string so that we retain escaped entities + # in attribute values. We must convert the string to an + # @origlist array to conform to the structure of the Tree + # Style. + # + my @original_array = split /\x/, $expat->original_string(); + my $source = $expat->original_string(); + + # Remove leading tag. + # + $source =~ s|^\s*<\s*(\S+)||s; + + # Grab attribute key/value pairs and push onto @origlist array. + # + while ($source) + { + if ($source =~ /^\s*([\w:-]+)\s*[=]\s*["]/) + { + $source =~ s|^\s*([\w:-]+)\s*[=]\s*["]([^"]*)["]||s; + push @origlist, $1; + push @origlist, '"' . $2 . '"'; + } + elsif ($source =~ /^\s*([\w:-]+)\s*[=]\s*[']/) + { + $source =~ s|^\s*([\w:-]+)\s*[=]\s*[']([^']*)[']||s; + push @origlist, $1; + push @origlist, "'" . $2 . "'"; + } + else + { + last; + } + } + + my $ol = [ { @origlist } ]; + + push @{ $expat->{Lists} }, $expat->{Curlist}; + push @{ $expat->{Curlist} }, $tag => $ol; + $expat->{Curlist} = $ol; +} + +sub readXml +{ + my $filename = shift || return; + if(!-f $filename) { + die "ERROR Cannot find filename: $filename\n"; + } + + my $ret = eval 'require XML::Parser'; + if(!$ret) { + die "You must have XML::Parser installed to run $0\n\n"; + } + my $xp = new XML::Parser(Style => 'Tree'); + $xp->setHandlers(Char => \&intltool_tree_char); + $xp->setHandlers(Start => \&intltool_tree_start); + $xp->setHandlers(CdataStart => \&intltool_tree_cdatastart); + $xp->setHandlers(CdataEnd => \&intltool_tree_cdataend); + my $tree = $xp->parsefile($filename); + +# Hello thereHowdydo +# would be: +# [foo, [{}, head, [{id => "a"}, 0, "Hello ", em, [{}, 0, "there"]], bar, [{}, +# 0, "Howdy", ref, [{}]], 0, "do" ] ] + + return $tree; +} + +sub print_header +{ + my $infile = shift; + my $fh = shift; + my $source; + + if(!-f $infile) { + die "ERROR Cannot find filename: $infile\n"; + } + + print $fh qq{\n}; + { + local $/; + open DOCINPUT, "<${FILE}" or die; + $source = ; + close DOCINPUT; + } + if ($source =~ /()/s) + { + print $fh "$1\n"; + } + elsif ($source =~ /(]*>)/s) + { + print $fh "$1\n"; + } +} + +sub parseTree +{ + my $fh = shift; + my $ref = shift; + my $language = shift || ""; + + my $name = shift @{ $ref }; + my $cont = shift @{ $ref }; + + while (!$name || "$name" eq "1") { + $name = shift @{ $ref }; + $cont = shift @{ $ref }; + } + + my $spacepreserve = 0; + my $attrs = @{$cont}[0]; + $spacepreserve = 1 if ((exists $attrs->{"xml:space"}) && ($attrs->{"xml:space"} =~ /^["']?preserve["']?$/)); + + traverse($fh, $name, $cont, $language, $spacepreserve); +} + +sub xml_merge_output +{ + my $source; + + if ($MULTIPLE_OUTPUT) { + for my $lang (sort keys %po_files_by_lang) { + if ( ! -e $lang ) { + mkdir $lang or die "Cannot create subdirectory $lang: $!\n"; + } + open OUTPUT, ">$lang/$OUTFILE" or die "Cannot open $lang/$OUTFILE: $!\n"; + binmode (OUTPUT) if $^O eq 'MSWin32'; + my $tree = readXml($FILE); + print_header($FILE, \*OUTPUT); + parseTree(\*OUTPUT, $tree, $lang); + close OUTPUT; + print "CREATED $lang/$OUTFILE\n" unless $QUIET_ARG; + } + } + open OUTPUT, ">$OUTFILE" or die "Cannot open $OUTFILE: $!\n"; + binmode (OUTPUT) if $^O eq 'MSWin32'; + my $tree = readXml($FILE); + print_header($FILE, \*OUTPUT); + parseTree(\*OUTPUT, $tree); + close OUTPUT; + print "CREATED $OUTFILE\n" unless $QUIET_ARG; +} + +sub keys_merge_translations +{ + open INPUT, "<${FILE}" or die; + open OUTPUT, ">${OUTFILE}" or die; + binmode (OUTPUT) if $^O eq 'MSWin32'; + + while () + { + if (s/^(\s*)_(\w+=(.*))/$1$2/) + { + my $string = $3; + + print OUTPUT; + + my $non_translated_line = $_; + + for my $lang (sort keys %po_files_by_lang) + { + my $translation = $translations{$lang, $string}; + next if !$translation; + + $_ = $non_translated_line; + s/(\w+)=.*/[$lang]$1=$translation/; + print OUTPUT; + } + } + else + { + print OUTPUT; + } + } + + close OUTPUT; + close INPUT; +} + +sub desktop_merge_translations +{ + open INPUT, "<${FILE}" or die; + open OUTPUT, ">${OUTFILE}" or die; + binmode (OUTPUT) if $^O eq 'MSWin32'; + + while () + { + if (s/^(\s*)_(\w+=(.*))/$1$2/) + { + my $string = $3; + + print OUTPUT; + + my $non_translated_line = $_; + + for my $lang (sort keys %po_files_by_lang) + { + my $translation = $translations{$lang, $string}; + next if !$translation; + + $_ = $non_translated_line; + s/(\w+)=.*/${1}[$lang]=$translation/; + print OUTPUT; + } + } + else + { + print OUTPUT; + } + } + + close OUTPUT; + close INPUT; +} + +sub schemas_merge_translations +{ + my $source; + + { + local $/; # slurp mode + open INPUT, "<$FILE" or die "can't open $FILE: $!"; + $source = ; + close INPUT; + } + + open OUTPUT, ">$OUTFILE" or die; + binmode (OUTPUT) if $^O eq 'MSWin32'; + + # FIXME: support attribute translations + + # Empty nodes never need translation, so unmark all of them. + # For example, <_foo/> is just replaced by . + $source =~ s|<\s*_($w+)\s*/>|<$1/>|g; + + while ($source =~ s/ + (.*?) + (\s+)((\s*) + (\s*(?:\s*)?(.*?)\s*<\/default>)?(\s*) + (\s*(?:\s*)?(.*?)\s*<\/short>)?(\s*) + (\s*(?:\s*)?(.*?)\s*<\/long>)?(\s*) + <\/locale>) + //sx) + { + print OUTPUT $1; + + my $locale_start_spaces = $2 ? $2 : ''; + my $default_spaces = $4 ? $4 : ''; + my $short_spaces = $7 ? $7 : ''; + my $long_spaces = $10 ? $10 : ''; + my $locale_end_spaces = $13 ? $13 : ''; + my $c_default_block = $3 ? $3 : ''; + my $default_string = $6 ? $6 : ''; + my $short_string = $9 ? $9 : ''; + my $long_string = $12 ? $12 : ''; + + print OUTPUT "$locale_start_spaces$c_default_block"; + + $default_string =~ s/\s+/ /g; + $default_string = entity_decode($default_string); + $short_string =~ s/\s+/ /g; + $short_string = entity_decode($short_string); + $long_string =~ s/\s+/ /g; + $long_string = entity_decode($long_string); + + for my $lang (sort keys %po_files_by_lang) + { + my $default_translation = $translations{$lang, $default_string}; + my $short_translation = $translations{$lang, $short_string}; + my $long_translation = $translations{$lang, $long_string}; + + next if (!$default_translation && !$short_translation && + !$long_translation); + + print OUTPUT "\n$locale_start_spaces"; + + print OUTPUT "$default_spaces"; + + if ($default_translation) + { + $default_translation = entity_encode($default_translation); + print OUTPUT "$default_translation"; + } + + print OUTPUT "$short_spaces"; + + if ($short_translation) + { + $short_translation = entity_encode($short_translation); + print OUTPUT "$short_translation"; + } + + print OUTPUT "$long_spaces"; + + if ($long_translation) + { + $long_translation = entity_encode($long_translation); + print OUTPUT "$long_translation"; + } + + print OUTPUT "$locale_end_spaces"; + } + } + + print OUTPUT $source; + + close OUTPUT; +} + +sub rfc822deb_merge_translations +{ + my %encodings = (); + for my $lang (keys %po_files_by_lang) { + $encodings{$lang} = ($UTF8_ARG ? 'UTF-8' : get_po_encoding($po_files_by_lang{$lang})); + } + + my $source; + + $Text::Wrap::huge = 'overflow'; + $Text::Wrap::break = qr/\n|\s(?=\S)/; + + { + local $/; # slurp mode + open INPUT, "<$FILE" or die "can't open $FILE: $!"; + $source = ; + close INPUT; + } + + open OUTPUT, ">${OUTFILE}" or die; + binmode (OUTPUT) if $^O eq 'MSWin32'; + + while ($source =~ /(^|\n+)(_*)([^:\s]+)(:[ \t]*)(.*?)(?=\n[\S\n]|$)/sg) + { + my $sep = $1; + my $non_translated_line = $3.$4; + my $string = $5; + my $underscore = length($2); + next if $underscore eq 0 && $non_translated_line =~ /^#/; + # Remove [] dummy strings + my $stripped = $string; + $stripped =~ s/\[\s[^\[\]]*\],/,/g if $underscore eq 2; + $stripped =~ s/\[\s[^\[\]]*\]$//; + $non_translated_line .= $stripped; + + print OUTPUT $sep.$non_translated_line; + + if ($underscore) + { + my @str_list = rfc822deb_split($underscore, $string); + + for my $lang (sort keys %po_files_by_lang) + { + my $is_translated = 1; + my $str_translated = ''; + my $first = 1; + + for my $str (@str_list) + { + my $translation = $translations{$lang, $str}; + + if (!$translation) + { + $is_translated = 0; + last; + } + + # $translation may also contain [] dummy + # strings, mostly to indicate an empty string + $translation =~ s/\[\s[^\[\]]*\]$//; + + if ($first) + { + if ($underscore eq 2) + { + $str_translated .= $translation; + } + else + { + $str_translated .= + Text::Tabs::expand($translation) . + "\n"; + } + } + else + { + if ($underscore eq 2) + { + $str_translated .= ', ' . $translation; + } + else + { + $str_translated .= Text::Tabs::expand( + Text::Wrap::wrap(' ', ' ', $translation)) . + "\n .\n"; + } + } + $first = 0; + + # To fix some problems with Text::Wrap::wrap + $str_translated =~ s/(\n )+\n/\n .\n/g; + } + next unless $is_translated; + + $str_translated =~ s/\n \.\n$//; + $str_translated =~ s/\s+$//; + + $_ = $non_translated_line; + s/^(\w+):\s*.*/$sep${1}-$lang.$encodings{$lang}: $str_translated/s; + print OUTPUT; + } + } + } + print OUTPUT "\n"; + + close OUTPUT; + close INPUT; +} + +sub rfc822deb_split +{ + # Debian defines a special way to deal with rfc822-style files: + # when a value contain newlines, it consists of + # 1. a short form (first line) + # 2. a long description, all lines begin with a space, + # and paragraphs are separated by a single dot on a line + # This routine returns an array of all paragraphs, and reformat + # them. + # When first argument is 2, the string is a comma separated list of + # values. + my $type = shift; + my $text = shift; + $text =~ s/^[ \t]//mg; + return (split(/, */, $text, 0)) if $type ne 1; + return ($text) if $text !~ /\n/; + + $text =~ s/([^\n]*)\n//; + my @list = ($1); + my $str = ''; + + for my $line (split (/\n/, $text)) + { + chomp $line; + if ($line =~ /^\.\s*$/) + { + # New paragraph + $str =~ s/\s*$//; + push(@list, $str); + $str = ''; + } + elsif ($line =~ /^\s/) + { + # Line which must not be reformatted + $str .= "\n" if length ($str) && $str !~ /\n$/; + $line =~ s/\s+$//; + $str .= $line."\n"; + } + else + { + # Continuation line, remove newline + $str .= " " if length ($str) && $str !~ /\n$/; + $str .= $line; + } + } + + $str =~ s/\s*$//; + push(@list, $str) if length ($str); + + return @list; +} + only in patch2: unchanged: --- ddccontrol-db-20061014.orig/intltool-extract +++ ddccontrol-db-20061014/intltool-extract @@ -0,0 +1,841 @@ +#!/usr/bin/perl -w +# -*- Mode: perl; indent-tabs-mode: nil; c-basic-offset: 4 -*- + +# +# The Intltool Message Extractor +# +# Copyright (C) 2000-2001, 2003 Free Software Foundation. +# +# Intltool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of the +# License, or (at your option) any later version. +# +# Intltool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. +# +# Authors: Kenneth Christiansen +# Darin Adler +# + +## Release information +my $PROGRAM = "intltool-extract"; +my $PACKAGE = "intltool"; +my $VERSION = "0.34.2"; + +## Loaded modules +use strict; +use File::Basename; +use Getopt::Long; + +## Scalars used by the option stuff +my $TYPE_ARG = "0"; +my $LOCAL_ARG = "0"; +my $HELP_ARG = "0"; +my $VERSION_ARG = "0"; +my $UPDATE_ARG = "0"; +my $QUIET_ARG = "0"; +my $SRCDIR_ARG = "."; + +my $FILE; +my $OUTFILE; + +my $gettext_type = ""; +my $input; +my %messages = (); +my %loc = (); +my %count = (); +my %comments = (); +my $strcount = 0; + +my $XMLCOMMENT = ""; + +## Use this instead of \w for XML files to handle more possible characters. +my $w = "[-A-Za-z0-9._:]"; + +## Always print first +$| = 1; + +## Handle options +GetOptions ( + "type=s" => \$TYPE_ARG, + "local|l" => \$LOCAL_ARG, + "help|h" => \$HELP_ARG, + "version|v" => \$VERSION_ARG, + "update" => \$UPDATE_ARG, + "quiet|q" => \$QUIET_ARG, + "srcdir=s" => \$SRCDIR_ARG, + ) or &error; + +&split_on_argument; + + +## Check for options. +## This section will check for the different options. + +sub split_on_argument { + + if ($VERSION_ARG) { + &version; + + } elsif ($HELP_ARG) { + &help; + + } elsif ($LOCAL_ARG) { + &place_local; + &extract; + + } elsif ($UPDATE_ARG) { + &place_normal; + &extract; + + } elsif (@ARGV > 0) { + &place_normal; + &message; + &extract; + + } else { + &help; + + } +} + +sub place_normal { + $FILE = $ARGV[0]; + $OUTFILE = "$FILE.h"; +} + +sub place_local { + $FILE = $ARGV[0]; + $OUTFILE = fileparse($FILE, ()); + if (!-e "tmp/") { + system("mkdir tmp/"); + } + $OUTFILE = "./tmp/$OUTFILE.h" +} + +sub determine_type { + if ($TYPE_ARG =~ /^gettext\/(.*)/) { + $gettext_type=$1 + } +} + +## Sub for printing release information +sub version{ + print <<_EOF_; +${PROGRAM} (${PACKAGE}) $VERSION +Copyright (C) 2000, 2003 Free Software Foundation, Inc. +Written by Kenneth Christiansen, 2000. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +_EOF_ + exit; +} + +## Sub for printing usage information +sub help { + print <<_EOF_; +Usage: ${PROGRAM} [OPTION]... [FILENAME] +Generates a header file from an XML source file. + +It grabs all strings between <_translatable_node> and its end tag in +XML files. Read manpage (man ${PROGRAM}) for more info. + + --type=TYPE Specify the file type of FILENAME. Currently supports: + "gettext/glade", "gettext/ini", "gettext/keys" + "gettext/rfc822deb", "gettext/schemas", + "gettext/scheme", "gettext/xml" + -l, --local Writes output into current working directory + (conflicts with --update) + --update Writes output into the same directory the source file + reside (conflicts with --local) + --srcdir Root of the source tree + -v, --version Output version information and exit + -h, --help Display this help and exit + -q, --quiet Quiet mode + +Report bugs to http://bugzilla.gnome.org/ (product name "$PACKAGE") +or send email to . +_EOF_ + exit; +} + +## Sub for printing error messages +sub error{ + print STDERR "Try `${PROGRAM} --help' for more information.\n"; + exit; +} + +sub message { + print "Generating C format header file for translation.\n" unless $QUIET_ARG; +} + +sub extract { + &determine_type; + + &convert; + + open OUT, ">$OUTFILE"; + binmode (OUT) if $^O eq 'MSWin32'; + &msg_write; + close OUT; + + print "Wrote $OUTFILE\n" unless $QUIET_ARG; +} + +sub convert { + + ## Reading the file + { + local (*IN); + local $/; #slurp mode + open (IN, "<$SRCDIR_ARG/$FILE") || die "can't open $SRCDIR_ARG/$FILE: $!"; + $input = ; + } + + &type_ini if $gettext_type eq "ini"; + &type_keys if $gettext_type eq "keys"; + &type_xml if $gettext_type eq "xml"; + &type_glade if $gettext_type eq "glade"; + &type_scheme if $gettext_type eq "scheme"; + &type_schemas if $gettext_type eq "schemas"; + &type_rfc822deb if $gettext_type eq "rfc822deb"; +} + +sub entity_decode_minimal +{ + local ($_) = @_; + + s/'/'/g; # ' + s/"/"/g; # " + s/&/&/g; + + return $_; +} + +sub entity_decode +{ + local ($_) = @_; + + s/'/'/g; # ' + s/"/"/g; # " + s/&/&/g; + s/<//g; + + return $_; +} + +sub escape_char +{ + return '\"' if $_ eq '"'; + return '\n' if $_ eq "\n"; + return '\\' if $_ eq '\\'; + + return $_; +} + +sub escape +{ + my ($string) = @_; + return join "", map &escape_char, split //, $string; +} + +sub type_ini { + ### For generic translatable desktop files ### + while ($input =~ /^_.*=(.*)$/mg) { + $messages{$1} = []; + } +} + +sub type_keys { + ### For generic translatable mime/keys files ### + while ($input =~ /^\s*_\w+=(.*)$/mg) { + $messages{$1} = []; + } +} + +sub type_xml { + ### For generic translatable XML files ### + my $tree = readXml($input); + parseTree(0, $tree); +} + +sub print_var { + my $var = shift; + my $vartype = ref $var; + + if ($vartype =~ /ARRAY/) { + my @arr = @{$var}; + print "[ "; + foreach my $el (@arr) { + print_var($el); + print ", "; + } + print "] "; + } elsif ($vartype =~ /HASH/) { + my %hash = %{$var}; + print "{ "; + foreach my $key (keys %hash) { + print "$key => "; + print_var($hash{$key}); + print ", "; + } + print "} "; + } else { + print $var; + } +} + +# Same syntax as getAttributeString in intltool-merge.in.in, similar logic (look for ## differences comment) +sub getAttributeString +{ + my $sub = shift; + my $do_translate = shift || 1; + my $language = shift || ""; + my $translate = shift; + my $result = ""; + foreach my $e (reverse(sort(keys %{ $sub }))) { + my $key = $e; + my $string = $sub->{$e}; + my $quote = '"'; + + $string =~ s/^[\s]+//; + $string =~ s/[\s]+$//; + + if ($string =~ /^'.*'$/) + { + $quote = "'"; + } + $string =~ s/^['"]//g; + $string =~ s/['"]$//g; + + ## differences from intltool-merge.in.in + if ($key =~ /^_/) { + $comments{entity_decode($string)} = $XMLCOMMENT if $XMLCOMMENT; + $messages{entity_decode($string)} = []; + $$translate = 2; + } + ## differences end here from intltool-merge.in.in + $result .= " $key=$quote$string$quote"; + } + return $result; +} + +# Verbatim copy from intltool-merge.in.in +sub getXMLstring +{ + my $ref = shift; + my $spacepreserve = shift || 0; + my @list = @{ $ref }; + my $result = ""; + + my $count = scalar(@list); + my $attrs = $list[0]; + my $index = 1; + + $spacepreserve = 1 if ((exists $attrs->{"xml:space"}) && ($attrs->{"xml:space"} =~ /^["']?preserve["']?$/)); + $spacepreserve = 0 if ((exists $attrs->{"xml:space"}) && ($attrs->{"xml:space"} =~ /^["']?default["']?$/)); + + while ($index < $count) { + my $type = $list[$index]; + my $content = $list[$index+1]; + if (! $type ) { + # We've got CDATA + if ($content) { + # lets strip the whitespace here, and *ONLY* here + $content =~ s/\s+/ /gs if (!$spacepreserve); + $result .= $content; + } + } elsif ( "$type" ne "1" ) { + # We've got another element + $result .= "<$type"; + $result .= getAttributeString(@{$content}[0], 0); # no nested translatable elements + if ($content) { + my $subresult = getXMLstring($content, $spacepreserve); + if ($subresult) { + $result .= ">".$subresult . ""; + } else { + $result .= "/>"; + } + } else { + $result .= "/>"; + } + } + $index += 2; + } + return $result; +} + +# Verbatim copy from intltool-merge.in.in, except for MULTIPLE_OUTPUT handling removed +# Translate list of nodes if necessary +sub translate_subnodes +{ + my $fh = shift; + my $content = shift; + my $language = shift || ""; + my $singlelang = shift || 0; + my $spacepreserve = shift || 0; + + my @nodes = @{ $content }; + + my $count = scalar(@nodes); + my $index = 0; + while ($index < $count) { + my $type = $nodes[$index]; + my $rest = $nodes[$index+1]; + traverse($fh, $type, $rest, $language, $spacepreserve); + $index += 2; + } +} + +# Based on traverse() in intltool-merge.in.in +sub traverse +{ + my $fh = shift; # unused, to allow us to sync code between -merge and -extract + my $nodename = shift; + my $content = shift; + my $language = shift || ""; + my $spacepreserve = shift || 0; + + if ($nodename && "$nodename" eq "1") { + $XMLCOMMENT = $content; + } elsif ($nodename) { + # element + my @all = @{ $content }; + my $attrs = shift @all; + my $translate = 0; + my $outattr = getAttributeString($attrs, 1, $language, \$translate); + + if ($nodename =~ /^_/) { + $translate = 1; + $nodename =~ s/^_//; + } + my $lookup = ''; + + $spacepreserve = 0 if ((exists $attrs->{"xml:space"}) && ($attrs->{"xml:space"} =~ /^["']?default["']?$/)); + $spacepreserve = 1 if ((exists $attrs->{"xml:space"}) && ($attrs->{"xml:space"} =~ /^["']?preserve["']?$/)); + + if ($translate) { + $lookup = getXMLstring($content, $spacepreserve); + if (!$spacepreserve) { + $lookup =~ s/^\s+//s; + $lookup =~ s/\s+$//s; + } + + if ($lookup && $translate != 2) { + $comments{$lookup} = $XMLCOMMENT if $XMLCOMMENT; + $messages{$lookup} = []; + } elsif ($translate == 2) { + translate_subnodes($fh, \@all, $language, 1, $spacepreserve); + } + } else { + $XMLCOMMENT = ""; + my $count = scalar(@all); + if ($count > 0) { + my $index = 0; + while ($index < $count) { + my $type = $all[$index]; + my $rest = $all[$index+1]; + traverse($fh, $type, $rest, $language, $spacepreserve); + $index += 2; + } + } + } + $XMLCOMMENT = ""; + } +} + + +# Verbatim copy from intltool-merge.in.in, $fh for compatibility +sub parseTree +{ + my $fh = shift; + my $ref = shift; + my $language = shift || ""; + + my $name = shift @{ $ref }; + my $cont = shift @{ $ref }; + + while (!$name || "$name" eq "1") { + $name = shift @{ $ref }; + $cont = shift @{ $ref }; + } + + my $spacepreserve = 0; + my $attrs = @{$cont}[0]; + $spacepreserve = 1 if ((exists $attrs->{"xml:space"}) && ($attrs->{"xml:space"} =~ /^["']?preserve["']?$/)); + + traverse($fh, $name, $cont, $language, $spacepreserve); +} + +# Verbatim copy from intltool-merge.in.in +sub intltool_tree_comment +{ + my $expat = shift; + my $data = $expat->original_string(); + my $clist = $expat->{Curlist}; + my $pos = $#$clist; + + $data =~ s/^$//s; + push @$clist, 1 => $data; +} + +# Verbatim copy from intltool-merge.in.in +sub intltool_tree_cdatastart +{ + my $expat = shift; + my $clist = $expat->{Curlist}; + my $pos = $#$clist; + + push @$clist, 0 => $expat->original_string(); +} + +# Verbatim copy from intltool-merge.in.in +sub intltool_tree_cdataend +{ + my $expat = shift; + my $clist = $expat->{Curlist}; + my $pos = $#$clist; + + $clist->[$pos] .= $expat->original_string(); +} + +# Verbatim copy from intltool-merge.in.in +sub intltool_tree_char +{ + my $expat = shift; + my $text = shift; + my $clist = $expat->{Curlist}; + my $pos = $#$clist; + + # Use original_string so that we retain escaped entities + # in CDATA sections. + # + if ($pos > 0 and $clist->[$pos - 1] eq '0') { + $clist->[$pos] .= $expat->original_string(); + } else { + push @$clist, 0 => $expat->original_string(); + } +} + +# Verbatim copy from intltool-merge.in.in +sub intltool_tree_start +{ + my $expat = shift; + my $tag = shift; + my @origlist = (); + + # Use original_string so that we retain escaped entities + # in attribute values. We must convert the string to an + # @origlist array to conform to the structure of the Tree + # Style. + # + my @original_array = split /\x/, $expat->original_string(); + my $source = $expat->original_string(); + + # Remove leading tag. + # + $source =~ s|^\s*<\s*(\S+)||s; + + # Grab attribute key/value pairs and push onto @origlist array. + # + while ($source) + { + if ($source =~ /^\s*([\w:-]+)\s*[=]\s*["]/) + { + $source =~ s|^\s*([\w:-]+)\s*[=]\s*["]([^"]*)["]||s; + push @origlist, $1; + push @origlist, '"' . $2 . '"'; + } + elsif ($source =~ /^\s*([\w:-]+)\s*[=]\s*[']/) + { + $source =~ s|^\s*([\w:-]+)\s*[=]\s*[']([^']*)[']||s; + push @origlist, $1; + push @origlist, "'" . $2 . "'"; + } + else + { + last; + } + } + + my $ol = [ { @origlist } ]; + + push @{ $expat->{Lists} }, $expat->{Curlist}; + push @{ $expat->{Curlist} }, $tag => $ol; + $expat->{Curlist} = $ol; +} + +# Copied from intltool-merge.in.in and added comment handler. +sub readXml +{ + my $xmldoc = shift || return; + my $ret = eval 'require XML::Parser'; + if(!$ret) { + die "You must have XML::Parser installed to run $0\n\n"; + } + my $xp = new XML::Parser(Style => 'Tree'); + $xp->setHandlers(Char => \&intltool_tree_char); + $xp->setHandlers(Start => \&intltool_tree_start); + $xp->setHandlers(CdataStart => \&intltool_tree_cdatastart); + $xp->setHandlers(CdataEnd => \&intltool_tree_cdataend); + + ## differences from intltool-merge.in.in + $xp->setHandlers(Comment => \&intltool_tree_comment); + ## differences end here from intltool-merge.in.in + + my $tree = $xp->parse($xmldoc); + #print_var($tree); + +# Hello thereHowdydo +# would be: +# [foo, [{}, 1, "comment", head, [{id => "a"}, 0, "Hello ", em, [{}, 0, "there"]], bar, +# [{}, 0, "Howdy", ref, [{}]], 0, "do" ] ] + + return $tree; +} + +sub type_schemas { + ### For schemas XML files ### + + # FIXME: We should handle escaped < (less than) + while ($input =~ / + \s* + (\s*(?:\s*)?(.*?)\s*<\/default>\s*)? + (\s*(?:\s*)?(.*?)\s*<\/short>\s*)? + (\s*(?:\s*)?(.*?)\s*<\/long>\s*)? + <\/locale> + /sgx) { + my @totranslate = ($3,$6,$9); + my @eachcomment = ($2,$5,$8); + foreach (@totranslate) { + my $currentcomment = shift @eachcomment; + next if !$_; + s/\s+/ /g; + $messages{entity_decode_minimal($_)} = []; + $comments{entity_decode_minimal($_)} = $currentcomment if (defined($currentcomment)); + } + } +} + +sub type_rfc822deb { + ### For rfc822-style Debian configuration files ### + + my $lineno = 1; + my $type = ''; + while ($input =~ /\G(.*?)(^|\n)(_+)([^:]+):[ \t]*(.*?)(?=\n\S|$)/sg) + { + my ($pre, $newline, $underscore, $tag, $text) = ($1, $2, $3, $4, $5); + while ($pre =~ m/\n/g) + { + $lineno ++; + } + $lineno += length($newline); + my @str_list = rfc822deb_split(length($underscore), $text); + for my $str (@str_list) + { + $strcount++; + $messages{$str} = []; + $loc{$str} = $lineno; + $count{$str} = $strcount; + my $usercomment = ''; + while($pre =~ s/(^|\n)#([^\n]*)$//s) + { + $usercomment = "\n" . $2 . $usercomment; + } + $comments{$str} = $tag . $usercomment; + } + $lineno += ($text =~ s/\n//g); + } +} + +sub rfc822deb_split { + # Debian defines a special way to deal with rfc822-style files: + # when a value contain newlines, it consists of + # 1. a short form (first line) + # 2. a long description, all lines begin with a space, + # and paragraphs are separated by a single dot on a line + # This routine returns an array of all paragraphs, and reformat + # them. + # When first argument is 2, the string is a comma separated list of + # values. + my $type = shift; + my $text = shift; + $text =~ s/^[ \t]//mg; + return (split(/, */, $text, 0)) if $type ne 1; + return ($text) if $text !~ /\n/; + + $text =~ s/([^\n]*)\n//; + my @list = ($1); + my $str = ''; + for my $line (split (/\n/, $text)) + { + chomp $line; + if ($line =~ /^\.\s*$/) + { + # New paragraph + $str =~ s/\s*$//; + push(@list, $str); + $str = ''; + } + elsif ($line =~ /^\s/) + { + # Line which must not be reformatted + $str .= "\n" if length ($str) && $str !~ /\n$/; + $line =~ s/\s+$//; + $str .= $line."\n"; + } + else + { + # Continuation line, remove newline + $str .= " " if length ($str) && $str !~ /\n$/; + $str .= $line; + } + } + $str =~ s/\s*$//; + push(@list, $str) if length ($str); + return @list; +} + +sub type_glade { + ### For translatable Glade XML files ### + + my $tags = "label|title|text|format|copyright|comments|preview_text|tooltip|message"; + + while ($input =~ /<($tags)>([^<]+)<\/($tags)>/sg) { + # Glade sometimes uses tags that normally mark translatable things for + # little bits of non-translatable content. We work around this by not + # translating strings that only includes something like label4 or window1. + $messages{entity_decode($2)} = [] unless $2 =~ /^(window|label|dialog)[0-9]+$/; + } + + while ($input =~ /(..[^<]*)<\/items>/sg) { + for my $item (split (/\n/, $1)) { + $messages{entity_decode($item)} = []; + } + } + + ## handle new glade files + while ($input =~ /<(property|atkproperty)\s+[^>]*translatable\s*=\s*"yes"(?:\s+[^>]*comments\s*=\s*"([^"]*)")?[^>]*>([^<]+)<\/\1>/sg) { + $messages{entity_decode($3)} = [] unless $3 =~ /^(window|label)[0-9]+$/; + if (defined($2) and !($3 =~ /^(window|label)[0-9]+$/)) { + $comments{entity_decode($3)} = entity_decode($2) ; + } + } + while ($input =~ /]*)"\s+description="([^>]+)"\/>/sg) { + $messages{entity_decode_minimal($2)} = []; + } +} + +sub type_scheme { + my ($line, $i, $state, $str, $trcomment, $char); + for $line (split(/\n/, $input)) { + $i = 0; + $state = 0; # 0 - nothing, 1 - string, 2 - translatable string + while ($i < length($line)) { + if (substr($line,$i,1) eq "\"") { + if ($state == 2) { + $comments{$str} = $trcomment if ($trcomment); + $messages{$str} = []; + $str = ''; + $state = 0; $trcomment = ""; + } elsif ($state == 1) { + $str = ''; + $state = 0; $trcomment = ""; + } else { + $state = 1; + $str = ''; + if ($i>0 && substr($line,$i-1,1) eq '_') { + $state = 2; + } + } + } elsif (!$state) { + if (substr($line,$i,1) eq ";") { + $trcomment = substr($line,$i+1); + $trcomment =~ s/^;*\s*//; + $i = length($line); + } elsif ($trcomment && substr($line,$i,1) !~ /\s|\(|\)|_/) { + $trcomment = ""; + } + } else { + if (substr($line,$i,1) eq "\\") { + $char = substr($line,$i+1,1); + if ($char ne "\"" && $char ne "\\") { + $str = $str . "\\"; + } + $i++; + } + $str = $str . substr($line,$i,1); + } + $i++; + } + } +} + +sub msg_write { + my @msgids; + if (%count) + { + @msgids = sort { $count{$a} <=> $count{$b} } keys %count; + } + else + { + @msgids = sort keys %messages; + } + for my $message (@msgids) + { + my $offsetlines = 1; + $offsetlines++ if $message =~ /%/; + if (defined ($comments{$message})) + { + while ($comments{$message} =~ m/\n/g) + { + $offsetlines++; + } + } + print OUT "# ".($loc{$message} - $offsetlines). " \"$FILE\"\n" + if defined $loc{$message}; + print OUT "/* ".$comments{$message}." */\n" + if defined $comments{$message}; + print OUT "/* xgettext:no-c-format */\n" if $message =~ /%/; + + my @lines = split (/\n/, $message, -1); + for (my $n = 0; $n < @lines; $n++) + { + if ($n == 0) + { + print OUT "char *s = N_(\""; + } + else + { + print OUT " \""; + } + + print OUT escape($lines[$n]); + + if ($n < @lines - 1) + { + print OUT "\\n\"\n"; + } + else + { + print OUT "\");\n"; + } + } + } +} + only in patch2: unchanged: --- ddccontrol-db-20061014.orig/config.sub +++ ddccontrol-db-20061014/config.sub @@ -1,10 +1,10 @@ #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, -# Inc. +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 +# Free Software Foundation, Inc. -timestamp='2006-02-27' +timestamp='2010-01-22' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -32,13 +32,16 @@ # Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. +# diff and a properly formatted GNU ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. @@ -72,8 +75,9 @@ version="\ GNU config.sub ($timestamp) -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -Free Software Foundation, Inc. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free +Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -122,6 +126,7 @@ case $maybe_os in nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` @@ -148,10 +153,13 @@ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) + -apple | -axis | -knuth | -cray | -microblaze) os= basic_machine=$1 ;; + -bluegene*) + os=-cnk + ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 @@ -241,20 +249,24 @@ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ | bfin \ | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx | dvp \ - | fr30 | frv \ + | d10v | d30v | dlx | dsp16xx \ + | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ - | m32r | m32rle | m68000 | m68k | m88k | maxq | mb | microblaze | mcore \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ - | mips64vr | mips64vrel \ + | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ @@ -267,6 +279,7 @@ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ + | moxie \ | mt \ | msp430 \ | nios | nios2 \ @@ -275,22 +288,22 @@ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ - | sh | sh[1234] | sh[24]a | sh[24]a*eb | sh[23]e | sh[34]eb | shbe | sheb | shle | sh[1234]le | sh3ele \ + | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | strongarm \ + | spu | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ + | ubicom32 \ | v850 | v850e \ | we32k \ - | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ - | z8k) + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k | z80) basic_machine=$basic_machine-unknown ;; - m32c) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) + m6811 | m68hc11 | m6812 | m68hc12 | picochip) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none @@ -319,25 +332,28 @@ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* \ + | avr-* | avr32-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ - | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ - | m32r-* | m32rle-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ - | mips64vr-* | mips64vrel-* \ + | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ @@ -358,23 +374,27 @@ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]a*eb-* | sh[23]e-* | sh[34]eb-* | shbe-* | sheb-* \ + | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile-* | tilegx-* \ | tron-* \ + | ubicom32-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa*-* \ | ymp-* \ - | z8k-*) + | z8k-* | z80-*) ;; - m32c-*) + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. @@ -438,6 +458,10 @@ basic_machine=m68k-apollo os=-bsd ;; + aros) + basic_machine=i386-pc + os=-aros + ;; aux) basic_machine=m68k-apple os=-aux @@ -446,10 +470,26 @@ basic_machine=ns32k-sequent os=-dynix ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; c90) basic_machine=c90-cray os=-unicos ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; convex-c1) basic_machine=c1-convex os=-bsd @@ -478,8 +518,8 @@ basic_machine=craynv-cray os=-unicosmp ;; - cr16c) - basic_machine=cr16c-unknown + cr16) + basic_machine=cr16-unknown os=-elf ;; crds | unos) @@ -517,6 +557,10 @@ basic_machine=m88k-motorola os=-sysv3 ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp @@ -671,6 +715,14 @@ basic_machine=m68k-isi os=-sysv ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; m88k-omron*) basic_machine=m88k-omron ;; @@ -682,10 +734,17 @@ basic_machine=ns32k-utek os=-sysv ;; + microblaze) + basic_machine=microblaze-xilinx + ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; miniframe) basic_machine=m68000-convergent ;; @@ -693,24 +752,6 @@ basic_machine=m68k-atari os=-mint ;; - mipsEE* | ee | ps2) - basic_machine=mips64r5900el-scei - case $os in - -linux*) - ;; - *) - os=-elf - ;; - esac - ;; - iop) - basic_machine=mipsel-scei - os=-irx - ;; - dvp) - basic_machine=dvp-scei - os=-elf - ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; @@ -830,6 +871,14 @@ basic_machine=i860-intel os=-osf ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; pbd) basic_machine=sparc-tti ;; @@ -931,6 +980,10 @@ sb1el) basic_machine=mipsisa64sb1el-unknown ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; sei) basic_machine=mips-sei os=-seiux @@ -942,6 +995,9 @@ basic_machine=sh-hitachi os=-hms ;; + sh5el) + basic_machine=sh5le-unknown + ;; sh64) basic_machine=sh64-unknown ;; @@ -1031,6 +1087,15 @@ basic_machine=tic6x-unknown os=-coff ;; + # This must be matched before tile*. + tilegx*) + basic_machine=tilegx-unknown + os=-linux-gnu + ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu + ;; tx39) basic_machine=mipstx39-unknown ;; @@ -1106,6 +1171,10 @@ basic_machine=z8k-unknown os=-sim ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; none) basic_machine=none-none os=-none @@ -1144,7 +1213,7 @@ we32k) basic_machine=we32k-att ;; - sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) @@ -1194,6 +1263,9 @@ # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; @@ -1214,10 +1286,11 @@ # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ + | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ @@ -1226,7 +1299,7 @@ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* \ + | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ @@ -1236,7 +1309,7 @@ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -irx*) + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1366,6 +1439,11 @@ -zvmoe) os=-zvmoe ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; -none) ;; *) @@ -1388,6 +1466,12 @@ # system, and we'll never get to this point. case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; *-acorn) os=-riscix1.2 ;; @@ -1397,9 +1481,9 @@ arm*-semi) os=-aout ;; - c4x-* | tic4x-*) - os=-coff - ;; + c4x-* | tic4x-*) + os=-coff + ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 @@ -1425,6 +1509,9 @@ m68*-cisco) os=-aout ;; + mep-*) + os=-elf + ;; mips*-cisco) os=-elf ;; @@ -1554,7 +1641,7 @@ -sunos*) vendor=sun ;; - -aix*) + -cnk*|-aix*) vendor=ibm ;; -beos*) only in patch2: unchanged: --- ddccontrol-db-20061014.orig/config.guess +++ ddccontrol-db-20061014/config.guess @@ -1,10 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, -# Inc. +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 +# Free Software Foundation, Inc. -timestamp='2006-02-27' +timestamp='2009-12-30' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -27,16 +27,16 @@ # the same distribution terms that you use for the rest of that program. -# Originally written by Per Bothner . -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD me=`echo "$0" | sed -e 's,.*/,,'` @@ -56,8 +56,9 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -Free Software Foundation, Inc. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free +Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -139,23 +140,6 @@ UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown -if [ "${UNAME_SYSTEM}" = "Linux" ] ; then - eval $set_cc_for_build - cat << EOF > $dummy.c - #include - #ifdef __UCLIBC__ - # ifdef __UCLIBC_CONFIG_VERSION__ - LIBC=uclibc __UCLIBC_CONFIG_VERSION__ - # else - LIBC=uclibc - # endif - #else - LIBC=gnu - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep LIBC= | sed -e 's: ::g'` -fi - # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in @@ -178,6 +162,7 @@ arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched @@ -186,7 +171,7 @@ arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null + | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? @@ -228,7 +213,7 @@ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) - echo powerppc-unknown-mirbsd${UNAME_RELEASE} + echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} @@ -340,14 +325,33 @@ case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize @@ -548,7 +552,7 @@ echo rs6000-ibm-aix3.2 fi exit ;; - *:AIX:*:[45]) + *:AIX:*:[456]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 @@ -656,7 +660,7 @@ # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null + grep -q __LP64__ then HP_ARCH="hppa2.0w" else @@ -788,6 +792,8 @@ case ${UNAME_MACHINE} in pc98) echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac @@ -795,10 +801,7 @@ i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; - i*:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:MSYS_NT-*:*:*) + *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) @@ -808,15 +811,24 @@ i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; - x86:Interix*:[345]*) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - EM64T:Interix*:[345]*) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we @@ -846,190 +858,125 @@ i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; arm*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) - echo cris-axis-linux-${LIBC} + echo cris-axis-linux-gnu exit ;; crisv32:Linux:*:*) - echo crisv32-axis-linux-${LIBC} + echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) - echo frv-unknown-linux-${LIBC} + echo frv-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit ;; ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } - ;; - mips64:Linux:*:*) + mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU - #undef mips64 - #undef mips64el + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el + CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 + CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; or32:Linux:*:*) - echo or32-unknown-linux-${LIBC} - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-${LIBC} + echo or32-unknown-linux-gnu exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-${LIBC} + padre:Linux:*:*) + echo sparc-unknown-linux-gnu exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="gnulibc1" ; fi - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; - PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; - *) echo hppa-unknown-linux-${LIBC} ;; + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; esac exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-${LIBC} + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-${LIBC} + echo ${UNAME_MACHINE}-dec-linux-gnu exit ;; x86_64:Linux:*:*) - echo x86_64-unknown-linux-${LIBC} + echo x86_64-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-${LIBC}" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-${LIBC}aout" - exit ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-${LIBC}coff" - exit ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-${LIBC}oldld" - exit ;; - esac - # This should get integrated into the C code below, but now we hack - if [ "$LIBC" != "gnu" ] ; then echo "$TENTATIVE" && exit 0 ; fi - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__sun) - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^LIBC/{ - s: ::g - p - }'`" - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both @@ -1058,7 +1005,7 @@ i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) @@ -1102,8 +1049,11 @@ pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 @@ -1141,6 +1091,16 @@ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; @@ -1153,7 +1113,7 @@ rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) @@ -1216,6 +1176,9 @@ BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; @@ -1225,6 +1188,15 @@ SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; @@ -1234,6 +1206,16 @@ *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} @@ -1315,6 +1297,9 @@ i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 @@ -1475,9 +1460,9 @@ the operating system you are using. It is advised that you download the most up to date version of the config scripts from - http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess + http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD and - http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub + http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD If the version you run ($0) is already up to date, please send the following data and any information you think might be only in patch2: unchanged: --- ddccontrol-db-20061014.orig/intltool-update +++ ddccontrol-db-20061014/intltool-update @@ -0,0 +1,1065 @@ +#!/usr/bin/perl -w +# -*- Mode: perl; indent-tabs-mode: nil; c-basic-offset: 4 -*- + +# +# The Intltool Message Updater +# +# Copyright (C) 2000-2003 Free Software Foundation. +# +# Intltool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# version 2 published by the Free Software Foundation. +# +# Intltool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. +# +# Authors: Kenneth Christiansen +# Maciej Stachowiak +# Darin Adler + +## Release information +my $PROGRAM = "intltool-update"; +my $VERSION = "0.34.2"; +my $PACKAGE = "intltool"; + +## Loaded modules +use strict; +use Getopt::Long; +use Cwd; +use File::Copy; +use File::Find; + +## Scalars used by the option stuff +my $HELP_ARG = 0; +my $VERSION_ARG = 0; +my $DIST_ARG = 0; +my $POT_ARG = 0; +my $HEADERS_ARG = 0; +my $MAINTAIN_ARG = 0; +my $REPORT_ARG = 0; +my $VERBOSE = 0; +my $GETTEXT_PACKAGE = ""; +my $OUTPUT_FILE = ""; + +my @languages; +my %varhash = (); +my %po_files_by_lang = (); + +# Regular expressions to categorize file types. +# FIXME: Please check if the following is correct + +my $xml_support = +"xml(?:\\.in)*|". # http://www.w3.org/XML/ (Note: .in is not required) +"ui|". # Bonobo specific - User Interface desc. files +"lang|". # ? +"glade2?(?:\\.in)*|". # Glade specific - User Interface desc. files (Note: .in is not required) +"scm(?:\\.in)*|". # ? (Note: .in is not required) +"oaf(?:\\.in)+|". # DEPRECATED: Replaces by Bonobo .server files +"etspec|". # ? +"server(?:\\.in)+|". # Bonobo specific +"sheet(?:\\.in)+|". # ? +"schemas(?:\\.in)+|". # GConf specific +"pong(?:\\.in)+|". # DEPRECATED: PONG is not used [by GNOME] any longer. +"kbd(?:\\.in)+"; # GOK specific. + +my $ini_support = +"icon(?:\\.in)+|". # http://www.freedesktop.org/Standards/icon-theme-spec +"desktop(?:\\.in)+|". # http://www.freedesktop.org/Standards/menu-spec +"caves(?:\\.in)+|". # GNOME Games specific +"directory(?:\\.in)+|". # http://www.freedesktop.org/Standards/menu-spec +"soundlist(?:\\.in)+|". # GNOME specific +"keys(?:\\.in)+|". # GNOME Mime database specific +"theme(?:\\.in)+|". # http://www.freedesktop.org/Standards/icon-theme-spec +"service(?:\\.in)+"; # DBus specific + +my $buildin_gettext_support = +"c|y|cs|cc|cpp|c\\+\\+|h|hh|gob|py"; + +## Always flush buffer when printing +$| = 1; + +## Sometimes the source tree will be rooted somewhere else. +my $SRCDIR = "."; +my $POTFILES_in; + +$SRCDIR = $ENV{"srcdir"} if $ENV{"srcdir"}; +$POTFILES_in = "<$SRCDIR/POTFILES.in"; + +my $devnull = ($^O eq 'MSWin32' ? 'NUL:' : '/dev/null'); + +## Handle options +GetOptions +( + "help" => \$HELP_ARG, + "version" => \$VERSION_ARG, + "dist|d" => \$DIST_ARG, + "pot|p" => \$POT_ARG, + "headers|s" => \$HEADERS_ARG, + "maintain|m" => \$MAINTAIN_ARG, + "report|r" => \$REPORT_ARG, + "verbose|x" => \$VERBOSE, + "gettext-package|g=s" => \$GETTEXT_PACKAGE, + "output-file|o=s" => \$OUTPUT_FILE, + ) or &Console_WriteError_InvalidOption; + +&Console_Write_IntltoolHelp if $HELP_ARG; +&Console_Write_IntltoolVersion if $VERSION_ARG; + +my $arg_count = ($DIST_ARG > 0) + + ($POT_ARG > 0) + + ($HEADERS_ARG > 0) + + ($MAINTAIN_ARG > 0) + + ($REPORT_ARG > 0); + +&Console_Write_IntltoolHelp if $arg_count > 1; + +# --version and --help don't require a module name +my $MODULE = $GETTEXT_PACKAGE || &FindPackageName; + +if ($POT_ARG) +{ + &GenerateHeaders; + &GeneratePOTemplate; +} +elsif ($HEADERS_ARG) +{ + &GenerateHeaders; +} +elsif ($MAINTAIN_ARG) +{ + &FindLeftoutFiles; +} +elsif ($REPORT_ARG) +{ + &GenerateHeaders; + &GeneratePOTemplate; + &Console_Write_CoverageReport; +} +elsif ((defined $ARGV[0]) && $ARGV[0] =~ /^[a-z]/) +{ + my $lang = $ARGV[0]; + + ## Report error if the language file supplied + ## to the command line is non-existent + &Console_WriteError_NotExisting("$SRCDIR/$lang.po") + if ! -s "$SRCDIR/$lang.po"; + + if (!$DIST_ARG) + { + print "Working, please wait..." if $VERBOSE; + &GenerateHeaders; + &GeneratePOTemplate; + } + &POFile_Update ($lang, $OUTPUT_FILE); + &Console_Write_TranslationStatus ($lang, $OUTPUT_FILE); +} +else +{ + &Console_Write_IntltoolHelp; +} + +exit; + +######### + +sub Console_Write_IntltoolVersion +{ + print <<_EOF_; +${PROGRAM} (${PACKAGE}) $VERSION +Written by Kenneth Christiansen, Maciej Stachowiak, and Darin Adler. + +Copyright (C) 2000-2003 Free Software Foundation, Inc. +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +_EOF_ + exit; +} + +sub Console_Write_IntltoolHelp +{ + print <<_EOF_; +Usage: ${PROGRAM} [OPTION]... LANGCODE +Updates PO template files and merge them with the translations. + +Mode of operation (only one is allowed): + -p, --pot generate the PO template only + -s, --headers generate the header files in POTFILES.in + -m, --maintain search for left out files from POTFILES.in + -r, --report display a status report for the module + -d, --dist merge LANGCODE.po with existing PO template + +Extra options: + -g, --gettext-package=NAME override PO template name, useful with --pot + -o, --output-file=FILE write merged translation to FILE + -x, --verbose display lots of feedback + --help display this help and exit + --version output version information and exit + +Examples of use: +${PROGRAM} --pot just create a new PO template +${PROGRAM} xy create new PO template and merge xy.po with it + +Report bugs to http://bugzilla.gnome.org/ (product name "$PACKAGE") +or send email to . +_EOF_ + exit; +} + +sub echo_n +{ + my $str = shift; + my $ret = `echo "$str"`; + + $ret =~ s/\n$//; # do we need the "s" flag? + + return $ret; +} + +sub POFile_DetermineType ($) +{ + my $type = $_; + my $gettext_type; + + my $xml_regex = "(?:" . $xml_support . ")"; + my $ini_regex = "(?:" . $ini_support . ")"; + my $buildin_regex = "(?:" . $buildin_gettext_support . ")"; + + if ($type =~ /\[type: gettext\/([^\]].*)]/) + { + $gettext_type=$1; + } + elsif ($type =~ /schemas(\.in)+$/) + { + $gettext_type="schemas"; + } + elsif ($type =~ /glade2?(\.in)*$/) + { + $gettext_type="glade"; + } + elsif ($type =~ /scm(\.in)*$/) + { + $gettext_type="scheme"; + } + elsif ($type =~ /keys(\.in)+$/) + { + $gettext_type="keys"; + } + + # bucket types + + elsif ($type =~ /$xml_regex$/) + { + $gettext_type="xml"; + } + elsif ($type =~ /$ini_regex$/) + { + $gettext_type="ini"; + } + elsif ($type =~ /$buildin_regex$/) + { + $gettext_type="buildin"; + } + else + { + $gettext_type="unknown"; + } + + return "gettext\/$gettext_type"; +} + +sub TextFile_DetermineEncoding ($) +{ + my $gettext_code="ASCII"; # All files are ASCII by default + my $filetype=`file $_ | cut -d ' ' -f 2`; + + if ($? eq "0") + { + if ($filetype =~ /^(ISO|UTF)/) + { + chomp ($gettext_code = $filetype); + } + elsif ($filetype =~ /^XML/) + { + $gettext_code="UTF-8"; # We asume that .glade and other .xml files are UTF-8 + } + } + + return $gettext_code; +} + +sub isNotValidMissing +{ + my ($file) = @_; + + return if $file =~ /^\{arch\}\/.*$/; + return if $file =~ /^$varhash{"PACKAGE"}-$varhash{"VERSION"}\/.*$/; +} + +sub FindLeftoutFiles +{ + my (@buf_i18n_plain, + @buf_i18n_xml, + @buf_i18n_xml_unmarked, + @buf_i18n_ini, + @buf_potfiles, + @buf_potfiles_ignore, + @buf_allfiles, + @buf_allfiles_sorted, + @buf_potfiles_sorted + ); + + ## Search and find all translatable files + find sub { + push @buf_i18n_plain, "$File::Find::name" if /\.($buildin_gettext_support)$/; + push @buf_i18n_xml, "$File::Find::name" if /\.($xml_support)$/; + push @buf_i18n_ini, "$File::Find::name" if /\.($ini_support)$/; + push @buf_i18n_xml_unmarked, "$File::Find::name" if /\.(schemas(\.in)+)$/; + }, ".."; + + + open POTFILES, $POTFILES_in or die "$PROGRAM: there's no POTFILES.in!\n"; + @buf_potfiles = grep !/^(#|\s*$)/, ; + close POTFILES; + + foreach (@buf_potfiles) { + s/^\[.*]\s*//; + } + + print "Searching for missing translatable files...\n" if $VERBOSE; + + ## Check if we should ignore some found files, when + ## comparing with POTFILES.in + foreach my $ignore ("POTFILES.skip", "POTFILES.ignore") + { + (-s $ignore) or next; + + if ("$ignore" eq "POTFILES.ignore") + { + print "The usage of POTFILES.ignore is deprecated. Please consider moving the\n". + "content of this file to POTFILES.skip.\n"; + } + + print "Found $ignore: Ignoring files...\n" if $VERBOSE; + open FILE, "<$ignore" or die "ERROR: Failed to open $ignore!\n"; + + while () + { + push @buf_potfiles_ignore, $_ unless /^(#|\s*$)/; + } + close FILE; + + @buf_potfiles = (@buf_potfiles_ignore, @buf_potfiles); + } + + foreach my $file (@buf_i18n_plain) + { + my $in_comment = 0; + my $in_macro = 0; + + open FILE, "<$file"; + while () + { + # Handle continued multi-line comment. + if ($in_comment) + { + next unless s-.*\*/--; + $in_comment = 0; + } + + # Handle continued macro. + if ($in_macro) + { + $in_macro = 0 unless /\\$/; + next; + } + + # Handle start of macro (or any preprocessor directive). + if (/^\s*\#/) + { + $in_macro = 1 if /^([^\\]|\\.)*\\$/; + next; + } + + # Handle comments and quoted text. + while (m-(/\*|//|\'|\")-) # \' and \" keep emacs perl mode happy + { + my $match = $1; + if ($match eq "/*") + { + if (!s-/\*.*?\*/--) + { + s-/\*.*--; + $in_comment = 1; + } + } + elsif ($match eq "//") + { + s-//.*--; + } + else # ' or " + { + if (!s-$match([^\\]|\\.)*?$match-QUOTEDTEXT-) + { + warn "mismatched quotes at line $. in $file\n"; + s-$match.*--; + } + } + } + + if (/\.GetString ?\(QUOTEDTEXT/) + { + if (defined isNotValidMissing (unpack("x3 A*", $file))) { + ## Remove the first 3 chars and add newline + push @buf_allfiles, unpack("x3 A*", $file) . "\n"; + } + last; + } + + if (/_\(QUOTEDTEXT/) + { + if (defined isNotValidMissing (unpack("x3 A*", $file))) { + ## Remove the first 3 chars and add newline + push @buf_allfiles, unpack("x3 A*", $file) . "\n"; + } + last; + } + } + close FILE; + } + + foreach my $file (@buf_i18n_xml) + { + open FILE, "<$file"; + + while () + { + # FIXME: share the pattern matching code with intltool-extract + if (/\s_[-A-Za-z0-9._:]+\s*=\s*\"([^"]+)\"/ || /<_[^>]+>/ || /translatable=\"yes\"/) + { + if (defined isNotValidMissing (unpack("x3 A*", $file))) { + push @buf_allfiles, unpack("x3 A*", $file) . "\n"; + } + last; + } + } + close FILE; + } + + foreach my $file (@buf_i18n_ini) + { + open FILE, "<$file"; + while () + { + if (/_(.*)=/) + { + if (defined isNotValidMissing (unpack("x3 A*", $file))) { + push @buf_allfiles, unpack("x3 A*", $file) . "\n"; + } + last; + } + } + close FILE; + } + + foreach my $file (@buf_i18n_xml_unmarked) + { + if (defined isNotValidMissing (unpack("x3 A*", $file))) { + push @buf_allfiles, unpack("x3 A*", $file) . "\n"; + } + } + + + @buf_allfiles_sorted = sort (@buf_allfiles); + @buf_potfiles_sorted = sort (@buf_potfiles); + + my %in2; + foreach (@buf_potfiles_sorted) + { + $in2{$_} = 1; + } + + my @result; + + foreach (@buf_allfiles_sorted) + { + if (!exists($in2{$_})) + { + push @result, $_ + } + } + + my @buf_potfiles_notexist; + + foreach (@buf_potfiles_sorted) + { + chomp (my $dummy = $_); + if ("$dummy" ne "" and ! -f "../$dummy") + { + push @buf_potfiles_notexist, $_; + } + } + + ## Save file with information about the files missing + ## if any, and give information about this procedure. + if (@result + @buf_potfiles_notexist > 0) + { + if (@result) + { + print "\n" if $VERBOSE; + unlink "missing"; + open OUT, ">missing"; + print OUT @result; + close OUT; + warn "\e[1mThe following files contain translations and are currently not in use. Please\e[0m\n". + "\e[1mconsider adding these to the POTFILES.in file, located in the po/ directory.\e[0m\n\n"; + print STDERR @result, "\n"; + warn "If some of these files are left out on purpose then please add them to\n". + "POTFILES.skip instead of POTFILES.in. A file \e[1m'missing'\e[0m containing this list\n". + "of left out files has been written in the current directory.\n"; + } + if (@buf_potfiles_notexist) + { + unlink "notexist"; + open OUT, ">notexist"; + print OUT @buf_potfiles_notexist; + close OUT; + warn "\n" if ($VERBOSE or @result); + warn "\e[1mThe following files do not exist anymore:\e[0m\n\n"; + warn @buf_potfiles_notexist, "\n"; + warn "Please remove them from POTFILES.in or POTFILES.skip. A file \e[1m'notexist'\e[0m\n". + "containing this list of absent files has been written in the current directory.\n"; + } + } + + ## If there is nothing to complain about, notify the user + else { + print "\nAll files containing translations are present in POTFILES.in.\n" if $VERBOSE; + } +} + +sub Console_WriteError_InvalidOption +{ + ## Handle invalid arguments + print STDERR "Try `${PROGRAM} --help' for more information.\n"; + exit 1; +} + +sub GenerateHeaders +{ + my $EXTRACT = "/home/rt/debian/packages/qa/ddccontrol-db/ddccontrol-db-20061014/intltool-extract"; + chomp $EXTRACT; + + $EXTRACT = $ENV{"INTLTOOL_EXTRACT"} if $ENV{"INTLTOOL_EXTRACT"}; + + ## Generate the .h header files, so we can allow glade and + ## xml translation support + if (! -x "$EXTRACT") + { + print STDERR "\n *** The intltool-extract script wasn't found!" + ."\n *** Without it, intltool-update can not generate files.\n"; + exit; + } + else + { + open (FILE, $POTFILES_in) or die "$PROGRAM: POTFILES.in not found.\n"; + + while () + { + chomp; + next if /^\[\s*encoding/; + + ## Find xml files in POTFILES.in and generate the + ## files with help from the extract script + + my $gettext_type= &POFile_DetermineType ($1); + + if (/\.($xml_support|$ini_support)$/ || /^\[/) + { + s/^\[[^\[].*]\s*//; + + my $filename = "../$_"; + + if ($VERBOSE) + { + system ($EXTRACT, "--update", "--srcdir=$SRCDIR", + "--type=$gettext_type", $filename); + } + else + { + system ($EXTRACT, "--update", "--type=$gettext_type", + "--srcdir=$SRCDIR", "--quiet", $filename); + } + } + } + close FILE; + } +} + +# +# Generate .pot file from POTFILES.in +# +sub GeneratePOTemplate +{ + my $XGETTEXT = $ENV{"XGETTEXT"} || "/usr/bin/xgettext"; + my $XGETTEXT_ARGS = $ENV{"XGETTEXT_ARGS"} || ''; + chomp $XGETTEXT; + + if (! -x $XGETTEXT) + { + print STDERR " *** xgettext is not found on this system!\n". + " *** Without it, intltool-update can not extract strings.\n"; + exit; + } + + print "Building $MODULE.pot...\n" if $VERBOSE; + + open INFILE, $POTFILES_in; + unlink "POTFILES.in.temp"; + open OUTFILE, ">POTFILES.in.temp" or die("Cannot open POTFILES.in.temp for writing"); + + my $gettext_support_nonascii = 0; + + # checks for GNU gettext >= 0.12 + my $dummy = `$XGETTEXT --version --from-code=UTF-8 >$devnull 2>$devnull`; + if ($? == 0) + { + $gettext_support_nonascii = 1; + } + else + { + # urge everybody to upgrade gettext + print STDERR "WARNING: This version of gettext does not support extracting non-ASCII\n". + " strings. That means you should install a version of gettext\n". + " that supports non-ASCII strings (such as GNU gettext >= 0.12),\n". + " or have to let non-ASCII strings untranslated. (If there is any)\n"; + } + + my $encoding = "ASCII"; + my $forced_gettext_code; + my @temp_headers; + my $encoding_problem_is_reported = 0; + + while () + { + next if (/^#/ or /^\s*$/); + + chomp; + + my $gettext_code; + + if (/^\[\s*encoding:\s*(.*)\s*\]/) + { + $forced_gettext_code=$1; + } + elsif (/\.($xml_support|$ini_support)$/ || /^\[/) + { + s/^\[.*]\s*//; + print OUTFILE "../$_.h\n"; + push @temp_headers, "../$_.h"; + $gettext_code = &TextFile_DetermineEncoding ("../$_.h") if ($gettext_support_nonascii and not defined $forced_gettext_code); + } + else + { + if ($SRCDIR eq ".") { + print OUTFILE "../$_\n"; + } else { + print OUTFILE "$SRCDIR/../$_\n"; + } + $gettext_code = &TextFile_DetermineEncoding ("../$_") if ($gettext_support_nonascii and not defined $forced_gettext_code); + } + + next if (! $gettext_support_nonascii); + + if (defined $forced_gettext_code) + { + $encoding=$forced_gettext_code; + } + elsif (defined $gettext_code and "$encoding" ne "$gettext_code") + { + if ($encoding eq "ASCII") + { + $encoding=$gettext_code; + } + elsif ($gettext_code ne "ASCII") + { + # Only report once because the message is quite long + if (! $encoding_problem_is_reported) + { + print STDERR "WARNING: You should use the same file encoding for all your project files,\n". + " but $PROGRAM thinks that most of the source files are in\n". + " $encoding encoding, while \"$_\" is (likely) in\n". + " $gettext_code encoding. If you are sure that all translatable strings\n". + " are in same encoding (say UTF-8), please \e[1m*prepend*\e[0m the following\n". + " line to POTFILES.in:\n\n". + " [encoding: UTF-8]\n\n". + " and make sure that configure.in/ac checks for $PACKAGE >= 0.27 .\n". + "(such warning message will only be reported once.)\n"; + $encoding_problem_is_reported = 1; + } + } + } + } + + close OUTFILE; + close INFILE; + + unlink "$MODULE.pot"; + my @xgettext_argument=("$XGETTEXT", + "--add-comments", + "--directory\=\.", + "--output\=$MODULE\.pot", + "--files-from\=\.\/POTFILES\.in\.temp"); + my $XGETTEXT_KEYWORDS = &FindPOTKeywords; + push @xgettext_argument, $XGETTEXT_KEYWORDS; + push @xgettext_argument, "--from-code\=$encoding" if ($gettext_support_nonascii); + push @xgettext_argument, $XGETTEXT_ARGS if $XGETTEXT_ARGS; + my $xgettext_command = join ' ', @xgettext_argument; + + # intercept xgettext error message + print "Running $xgettext_command\n" if $VERBOSE; + my $xgettext_error_msg = `$xgettext_command 2>\&1`; + my $command_failed = $?; + + unlink "POTFILES.in.temp"; + + print "Removing generated header (.h) files..." if $VERBOSE; + unlink foreach (@temp_headers); + print "done.\n" if $VERBOSE; + + if (! $command_failed) + { + if (! -e "$MODULE.pot") + { + print "None of the files in POTFILES.in contain strings marked for translation.\n" if $VERBOSE; + } + else + { + print "Wrote $MODULE.pot\n" if $VERBOSE; + } + } + else + { + if ($xgettext_error_msg =~ /--from-code/) + { + # replace non-ASCII error message with a more useful one. + print STDERR "ERROR: xgettext failed to generate PO template file because there is non-ASCII\n". + " string marked for translation. Please make sure that all strings marked\n". + " for translation are in uniform encoding (say UTF-8), then \e[1m*prepend*\e[0m the\n". + " following line to POTFILES.in and rerun $PROGRAM:\n\n". + " [encoding: UTF-8]\n\n"; + } + else + { + print STDERR "$xgettext_error_msg"; + if (-e "$MODULE.pot") + { + # is this possible? + print STDERR "ERROR: xgettext failed but still managed to generate PO template file.\n". + " Please consult error message above if there is any.\n"; + } + else + { + print STDERR "ERROR: xgettext failed to generate PO template file. Please consult\n". + " error message above if there is any.\n"; + } + } + exit (1); + } +} + +sub POFile_Update +{ + -f "$MODULE.pot" or die "$PROGRAM: $MODULE.pot does not exist.\n"; + + my $MSGMERGE = $ENV{"MSGMERGE"} || "/usr/bin/msgmerge"; + my ($lang, $outfile) = @_; + + print "Merging $SRCDIR/$lang.po with $MODULE.pot..." if $VERBOSE; + + my $infile = "$SRCDIR/$lang.po"; + $outfile = "$SRCDIR/$lang.po" if ($outfile eq ""); + + # I think msgmerge won't overwrite old file if merge is not successful + system ("$MSGMERGE", "-o", $outfile, $infile, "$MODULE.pot"); +} + +sub Console_WriteError_NotExisting +{ + my ($file) = @_; + + ## Report error if supplied language file is non-existing + print STDERR "$PROGRAM: $file does not exist!\n"; + print STDERR "Try '$PROGRAM --help' for more information.\n"; + exit; +} + +sub GatherPOFiles +{ + my @po_files = glob ("./*.po"); + + @languages = map (&POFile_GetLanguage, @po_files); + + foreach my $lang (@languages) + { + $po_files_by_lang{$lang} = shift (@po_files); + } +} + +sub POFile_GetLanguage ($) +{ + s/^(.*\/)?(.+)\.po$/$2/; + return $_; +} + +sub Console_Write_TranslationStatus +{ + my ($lang, $output_file) = @_; + my $MSGFMT = $ENV{"MSGFMT"} || "/usr/bin/msgfmt"; + + $output_file = "$SRCDIR/$lang.po" if ($output_file eq ""); + + system ("$MSGFMT", "-o", "$devnull", "--verbose", $output_file); +} + +sub Console_Write_CoverageReport +{ + my $MSGFMT = $ENV{"MSGFMT"} || "/usr/bin/msgfmt"; + + &GatherPOFiles; + + foreach my $lang (@languages) + { + print "$lang: "; + &POFile_Update ($lang, ""); + } + + print "\n\n * Current translation support in $MODULE \n\n"; + + foreach my $lang (@languages) + { + print "$lang: "; + system ("$MSGFMT", "-o", "$devnull", "--verbose", "$SRCDIR/$lang.po"); + } +} + +sub SubstituteVariable +{ + my ($str) = @_; + + # always need to rewind file whenever it has been accessed + seek (CONF, 0, 0); + + # cache each variable. varhash is global to we can add + # variables elsewhere. + while () + { + if (/^(\w+)=(.*)$/) + { + ($varhash{$1} = $2) =~ s/^["'](.*)["']$/$1/; + } + } + + if ($str =~ /^(.*)\${?([A-Z_]+)}?(.*)$/) + { + my $rest = $3; + my $untouched = $1; + my $sub = $varhash{$2}; + + return SubstituteVariable ("$untouched$sub$rest"); + } + + # We're using Perl backticks ` and "echo -n" here in order to + # expand any shell escapes (such as backticks themselves) in every variable + return echo_n ($str); +} + +sub CONF_Handle_Open +{ + my $base_dirname = getcwd(); + $base_dirname =~ s@.*/@@; + + my ($conf_in, $src_dir); + + if ($base_dirname =~ /^po(-.+)?$/) + { + if (-f "Makevars") + { + my $makefile_source; + + local (*IN); + open (IN, ") + { + if (/^top_builddir[ \t]*=/) + { + $src_dir = $_; + $src_dir =~ s/^top_builddir[ \t]*=[ \t]*([^ \t\n\r]*)/$1/; + + chomp $src_dir; + if (-f "$src_dir" . "/configure.ac") { + $conf_in = "$src_dir" . "/configure.ac" . "\n"; + } else { + $conf_in = "$src_dir" . "/configure.in" . "\n"; + } + last; + } + } + close IN; + + $conf_in || die "Cannot find top_builddir in Makevars."; + } + elsif (-f "../configure.ac") + { + $conf_in = "../configure.ac"; + } + elsif (-f "../configure.in") + { + $conf_in = "../configure.in"; + } + else + { + my $makefile_source; + + local (*IN); + open (IN, ") + { + if (/^top_srcdir[ \t]*=/) + { + $src_dir = $_; + $src_dir =~ s/^top_srcdir[ \t]*=[ \t]*([^ \t\n\r]*)/$1/; + + chomp $src_dir; + $conf_in = "$src_dir" . "/configure.in" . "\n"; + + last; + } + } + close IN; + + $conf_in || die "Cannot find top_srcdir in Makefile."; + } + + open (CONF, "<$conf_in"); + } + else + { + print STDERR "$PROGRAM: Unable to proceed.\n" . + "Make sure to run this script inside the po directory.\n"; + exit; + } +} + +sub FindPackageName +{ + my $version; + my $domain = &FindMakevarsDomain; + my $name = $domain || "untitled"; + + &CONF_Handle_Open; + + my $conf_source; { + local (*IN); + open (IN, "<&CONF") || return $name; + seek (IN, 0, 0); + local $/; # slurp mode + $conf_source = ; + close IN; + } + + # priority for getting package name: + # 1. GETTEXT_PACKAGE + # 2. first argument of AC_INIT (with >= 2 arguments) + # 3. first argument of AM_INIT_AUTOMAKE (with >= 2 argument) + + # /^AM_INIT_AUTOMAKE\([\s\[]*([^,\)\s\]]+)/m + # the \s makes this not work, why? + if ($conf_source =~ /^AM_INIT_AUTOMAKE\(([^,\)]+),([^,\)]+)/m) + { + ($name, $version) = ($1, $2); + $name =~ s/[\[\]\s]//g; + $version =~ s/[\[\]\s]//g; + $varhash{"PACKAGE_NAME"} = $name; + $varhash{"PACKAGE"} = $name; + $varhash{"PACKAGE_VERSION"} = $version; + $varhash{"VERSION"} = $version; + } + + if ($conf_source =~ /^AC_INIT\(([^,\)]+),([^,\)]+)/m) + { + ($name, $version) = ($1, $2); + $name =~ s/[\[\]\s]//g; + $version =~ s/[\[\]\s]//g; + $varhash{"PACKAGE_NAME"} = $name; + $varhash{"PACKAGE"} = $name; + $varhash{"PACKAGE_VERSION"} = $version; + $varhash{"VERSION"} = $version; + } + + # \s makes this not work, why? + $name = $1 if $conf_source =~ /^GETTEXT_PACKAGE=\[?([^\n\]]+)/m; + + # m4 macros AC_PACKAGE_NAME, AC_PACKAGE_VERSION etc. have same value + # as corresponding $PACKAGE_NAME, $PACKAGE_VERSION etc. shell variables. + $name =~ s/\bAC_PACKAGE_/\$PACKAGE_/g; + + $name = $domain if $domain; + + $name = SubstituteVariable ($name); + $name =~ s/^["'](.*)["']$/$1/; + + return $name if $name; +} + + +sub FindPOTKeywords +{ + + my $keywords = "--keyword\=\_ --keyword\=N\_ --keyword\=U\_ --keyword\=Q\_"; + my $varname = "XGETTEXT_OPTIONS"; + my $make_source; { + local (*IN); + open (IN, "; + close IN; + } + + $keywords = $1 if $make_source =~ /^$varname[ ]*=\[?([^\n\]]+)/m; + + return $keywords; +} + +sub FindMakevarsDomain +{ + + my $domain = ""; + my $makevars_source; { + local (*IN); + open (IN, "; + close IN; + } + + $domain = $1 if $makevars_source =~ /^DOMAIN[ ]*=\[?([^\n\]\$]+)/m; + $domain =~ s/^\s+//; + $domain =~ s/\s+$//; + + return $domain; +}