diff -Nru eog-3.26.2/ABOUT-NLS eog-3.27.90/ABOUT-NLS --- eog-3.26.2/ABOUT-NLS 2017-06-04 15:17:03.000000000 +0000 +++ eog-3.27.90/ABOUT-NLS 1970-01-01 00:00:00.000000000 +0000 @@ -1,1379 +0,0 @@ -1 Notes on the Free Translation Project -*************************************** - -Free software is going international! The Free Translation Project is a -way to get maintainers of free software, translators, and users all -together, so that free software will gradually become able to speak many -languages. A few packages already provide translations for their -messages. - - If you found this 'ABOUT-NLS' file inside a distribution, you may -assume that the distributed package does use GNU 'gettext' internally, -itself available at your nearest GNU archive site. But you do _not_ -need to install GNU 'gettext' prior to configuring, installing or using -this package with messages translated. - - Installers will find here some useful hints. These notes also -explain how users should proceed for getting the programs to use the -available translations. They tell how people wanting to contribute and -work on translations can contact the appropriate team. - -1.1 INSTALL Matters -=================== - -Some packages are "localizable" when properly installed; the programs -they contain can be made to speak your own native language. Most such -packages use GNU 'gettext'. Other packages have their own ways to -internationalization, predating GNU 'gettext'. - - By default, this package will be installed to allow translation of -messages. It will automatically detect whether the system already -provides the GNU 'gettext' functions. Installers may use special -options at configuration time for changing the default behaviour. The -command: - - ./configure --disable-nls - -will _totally_ disable translation of messages. - - When you already have GNU 'gettext' installed on your system and run -configure without an option for your new package, 'configure' will -probably detect the previously built and installed 'libintl' library and -will decide to use it. If not, you may have to to use the -'--with-libintl-prefix' option to tell 'configure' where to look for it. - - Internationalized packages usually have many 'po/LL.po' files, where -LL gives an ISO 639 two-letter code identifying the language. Unless -translations have been forbidden at 'configure' time by using the -'--disable-nls' switch, all available translations are installed -together with the package. However, the environment variable 'LINGUAS' -may be set, prior to configuration, to limit the installed set. -'LINGUAS' should then contain a space separated list of two-letter -codes, stating which languages are allowed. - -1.2 Using This Package -====================== - -As a user, if your language has been installed for this package, you -only have to set the 'LANG' environment variable to the appropriate -'LL_CC' combination. If you happen to have the 'LC_ALL' or some other -'LC_xxx' environment variables set, you should unset them before setting -'LANG', otherwise the setting of 'LANG' will not have the desired -effect. Here 'LL' is an ISO 639 two-letter language code, and 'CC' is -an ISO 3166 two-letter country code. For example, let's suppose that -you speak German and live in Germany. At the shell prompt, merely -execute 'setenv LANG de_DE' (in 'csh'), 'export LANG; LANG=de_DE' (in -'sh') or 'export LANG=de_DE' (in 'bash'). This can be done from your -'.login' or '.profile' file, once and for all. - - You might think that the country code specification is redundant. -But in fact, some languages have dialects in different countries. For -example, 'de_AT' is used for Austria, and 'pt_BR' for Brazil. The -country code serves to distinguish the dialects. - - The locale naming convention of 'LL_CC', with 'LL' denoting the -language and 'CC' denoting the country, is the one use on systems based -on GNU libc. On other systems, some variations of this scheme are used, -such as 'LL' or 'LL_CC.ENCODING'. You can get the list of locales -supported by your system for your language by running the command -'locale -a | grep '^LL''. - - Not all programs have translations for all languages. By default, an -English message is shown in place of a nonexistent translation. If you -understand other languages, you can set up a priority list of languages. -This is done through a different environment variable, called -'LANGUAGE'. GNU 'gettext' gives preference to 'LANGUAGE' over 'LANG' -for the purpose of message handling, but you still need to have 'LANG' -set to the primary language; this is required by other parts of the -system libraries. For example, some Swedish users who would rather read -translations in German than English for when Swedish is not available, -set 'LANGUAGE' to 'sv:de' while leaving 'LANG' to 'sv_SE'. - - Special advice for Norwegian users: The language code for Norwegian -bokma*l changed from 'no' to 'nb' recently (in 2003). During the -transition period, while some message catalogs for this language are -installed under 'nb' and some older ones under 'no', it's recommended -for Norwegian users to set 'LANGUAGE' to 'nb:no' so that both newer and -older translations are used. - - In the 'LANGUAGE' environment variable, but not in the 'LANG' -environment variable, 'LL_CC' combinations can be abbreviated as 'LL' to -denote the language's main dialect. For example, 'de' is equivalent to -'de_DE' (German as spoken in Germany), and 'pt' to 'pt_PT' (Portuguese -as spoken in Portugal) in this context. - -1.3 Translating Teams -===================== - -For the Free Translation Project to be a success, we need interested -people who like their own language and write it well, and who are also -able to synergize with other translators speaking the same language. -Each translation team has its own mailing list. The up-to-date list of -teams can be found at the Free Translation Project's homepage, -'http://translationproject.org/', in the "Teams" area. - - If you'd like to volunteer to _work_ at translating messages, you -should become a member of the translating team for your own language. -The subscribing address is _not_ the same as the list itself, it has -'-request' appended. For example, speakers of Swedish can send a -message to 'sv-request@li.org', having this message body: - - subscribe - - Keep in mind that team members are expected to participate _actively_ -in translations, or at solving translational difficulties, rather than -merely lurking around. If your team does not exist yet and you want to -start one, or if you are unsure about what to do or how to get started, -please write to 'coordinator@translationproject.org' to reach the -coordinator for all translator teams. - - The English team is special. It works at improving and uniformizing -the terminology in use. Proven linguistic skills are praised more than -programming skills, here. - -1.4 Available Packages -====================== - -Languages are not equally supported in all packages. The following -matrix shows the current state of internationalization, as of Jun 2014. -The matrix shows, in regard of each package, for which languages PO -files have been submitted to translation coordination, with a -translation percentage of at least 50%. - - Ready PO files af am an ar as ast az be bg bn bn_IN bs ca crh cs - +---------------------------------------------------+ - a2ps | [] [] [] | - aegis | | - anubis | | - aspell | [] [] [] | - bash | [] [] [] | - bfd | | - binutils | [] | - bison | | - bison-runtime | [] | - buzztrax | [] | - ccd2cue | | - ccide | | - cflow | | - clisp | | - coreutils | [] [] | - cpio | | - cppi | | - cpplib | [] | - cryptsetup | [] | - datamash | | - denemo | [] [] | - dfarc | [] | - dialog | [] [] [] | - dico | | - diffutils | [] | - dink | [] | - direvent | | - doodle | [] | - dos2unix | | - dos2unix-man | | - e2fsprogs | [] [] | - enscript | [] | - exif | [] | - fetchmail | [] [] | - findutils | [] | - flex | [] | - freedink | [] [] | - fusionforge | | - gas | | - gawk | [] | - gcal | [] | - gcc | | - gdbm | | - gettext-examples | [] [] [] [] [] | - gettext-runtime | [] [] [] | - gettext-tools | [] [] | - gjay | | - glunarclock | [] [] [] | - gnubiff | [] | - gnubik | [] | - gnucash | () () [] | - gnuchess | | - gnulib | [] | - gnunet | | - gnunet-gtk | | - gold | | - gphoto2 | [] | - gprof | [] | - gramadoir | | - grep | [] [] [] | - grub | [] | - gsasl | | - gss | | - gst-plugins-bad | [] | - gst-plugins-base | [] [] [] | - gst-plugins-good | [] [] [] | - gst-plugins-ugly | [] [] [] | - gstreamer | [] [] [] [] | - gtick | [] | - gtkam | [] [] | - gtkspell | [] [] [] [] [] | - guix | | - guix-packages | | - gutenprint | [] | - hello | [] | - help2man | | - help2man-texi | | - hylafax | | - idutils | | - iso_15924 | [] | - iso_3166 | [] [] [] [] [] [] [] [] [] [] | - iso_3166_2 | | - iso_4217 | [] | - iso_639 | [] [] [] [] [] [] [] [] [] | - iso_639_3 | [] [] | - iso_639_5 | | - jwhois | | - kbd | [] | - klavaro | [] [] [] [] [] | - latrine | | - ld | [] | - leafpad | [] [] [] [] | - libc | [] [] [] | - libexif | () | - libextractor | | - libgnutls | [] | - libgphoto2 | [] | - libgphoto2_port | [] | - libgsasl | | - libiconv | [] [] | - libidn | [] | - liferea | [] [] [] [] | - lilypond | [] [] | - lordsawar | [] | - lprng | | - lynx | [] [] | - m4 | [] | - mailfromd | | - mailutils | | - make | [] | - man-db | [] [] | - man-db-manpages | | - midi-instruments | [] [] [] | - minicom | [] | - mkisofs | [] | - myserver | [] | - nano | [] [] [] | - opcodes | | - parted | [] | - pies | | - popt | [] | - procps-ng | | - procps-ng-man | | - psmisc | [] | - pspp | [] | - pushover | [] | - pwdutils | | - pyspread | | - radius | [] | - recode | [] [] [] | - recutils | | - rpm | | - rush | | - sarg | | - sed | [] [] [] | - sharutils | [] | - shishi | | - skribilo | | - solfege | [] | - solfege-manual | | - spotmachine | | - sudo | [] [] | - sudoers | [] [] | - sysstat | [] | - tar | [] [] [] | - texinfo | [] [] | - texinfo_document | [] | - tigervnc | [] | - tin | | - tin-man | | - tracgoogleappsa... | | - trader | | - util-linux | [] | - ve | | - vice | | - vmm | | - vorbis-tools | [] | - wastesedge | | - wcd | | - wcd-man | | - wdiff | [] [] | - wget | [] | - wyslij-po | | - xboard | | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] | - +---------------------------------------------------+ - af am an ar as ast az be bg bn bn_IN bs ca crh cs - 4 0 2 5 3 11 0 8 23 3 3 1 54 4 73 - - da de el en en_GB en_ZA eo es et eu fa fi fr - +--------------------------------------------------+ - a2ps | [] [] [] [] [] [] [] [] [] | - aegis | [] [] [] [] | - anubis | [] [] [] [] [] | - aspell | [] [] [] [] [] [] [] | - bash | [] [] [] | - bfd | [] [] [] [] | - binutils | [] [] [] | - bison | [] [] [] [] [] [] [] [] | - bison-runtime | [] [] [] [] [] [] [] [] | - buzztrax | [] [] [] [] | - ccd2cue | [] [] [] | - ccide | [] [] [] [] [] [] | - cflow | [] [] [] [] [] | - clisp | [] [] [] [] [] | - coreutils | [] [] [] [] [] | - cpio | [] [] [] [] [] | - cppi | [] [] [] [] [] | - cpplib | [] [] [] [] [] [] | - cryptsetup | [] [] [] [] [] | - datamash | [] [] [] [] | - denemo | [] | - dfarc | [] [] [] [] [] [] | - dialog | [] [] [] [] [] [] [] [] [] | - dico | [] [] [] [] | - diffutils | [] [] [] [] [] [] | - dink | [] [] [] [] [] [] | - direvent | [] [] [] [] | - doodle | [] [] [] [] | - dos2unix | [] [] [] [] [] | - dos2unix-man | [] [] [] | - e2fsprogs | [] [] [] [] [] | - enscript | [] [] [] [] [] [] | - exif | [] [] [] [] [] [] | - fetchmail | [] () [] [] [] [] [] | - findutils | [] [] [] [] [] [] [] [] | - flex | [] [] [] [] [] [] | - freedink | [] [] [] [] [] [] [] [] | - fusionforge | [] [] [] | - gas | [] [] [] | - gawk | [] [] [] [] [] | - gcal | [] [] [] [] | - gcc | [] [] | - gdbm | [] [] [] [] [] | - gettext-examples | [] [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] | - gettext-tools | [] [] [] [] [] | - gjay | [] [] [] [] | - glunarclock | [] [] [] [] [] | - gnubiff | () [] [] () | - gnubik | [] [] [] [] [] | - gnucash | [] () () () () () () | - gnuchess | [] [] [] [] | - gnulib | [] [] [] [] [] [] [] | - gnunet | [] | - gnunet-gtk | [] | - gold | [] [] [] | - gphoto2 | [] () [] [] | - gprof | [] [] [] [] [] [] | - gramadoir | [] [] [] [] [] | - grep | [] [] [] [] [] [] [] | - grub | [] [] [] [] [] | - gsasl | [] [] [] [] [] | - gss | [] [] [] [] [] | - gst-plugins-bad | [] [] | - gst-plugins-base | [] [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] [] [] | - gtick | [] () [] [] [] | - gtkam | [] () [] [] [] [] | - gtkspell | [] [] [] [] [] [] [] [] | - guix | [] [] | - guix-packages | | - gutenprint | [] [] [] [] | - hello | [] [] [] [] [] [] [] [] | - help2man | [] [] [] [] [] [] [] | - help2man-texi | [] [] [] | - hylafax | [] [] | - idutils | [] [] [] [] [] | - iso_15924 | [] () [] [] () [] () | - iso_3166 | [] () [] [] [] [] () [] () | - iso_3166_2 | [] () () () | - iso_4217 | [] () [] [] [] () [] () | - iso_639 | [] () [] [] () [] () | - iso_639_3 | () () () | - iso_639_5 | () () () | - jwhois | [] [] [] [] [] | - kbd | [] [] [] [] [] [] | - klavaro | [] [] [] [] [] [] [] | - latrine | [] () [] [] | - ld | [] [] [] [] | - leafpad | [] [] [] [] [] [] [] [] | - libc | [] [] [] [] [] | - libexif | [] [] () [] [] | - libextractor | [] | - libgnutls | [] [] [] [] | - libgphoto2 | [] () [] | - libgphoto2_port | [] () [] [] [] [] | - libgsasl | [] [] [] [] [] | - libiconv | [] [] [] [] [] [] [] | - libidn | [] [] [] [] [] | - liferea | [] () [] [] [] [] [] | - lilypond | [] [] [] [] [] [] | - lordsawar | [] [] | - lprng | | - lynx | [] [] [] [] [] [] | - m4 | [] [] [] [] [] [] | - mailfromd | [] | - mailutils | [] [] [] [] | - make | [] [] [] [] [] | - man-db | [] [] [] [] | - man-db-manpages | [] [] | - midi-instruments | [] [] [] [] [] [] [] [] [] | - minicom | [] [] [] [] [] | - mkisofs | [] [] [] | - myserver | [] [] [] [] | - nano | [] [] [] [] [] [] [] | - opcodes | [] [] [] [] [] | - parted | [] [] [] | - pies | [] | - popt | [] [] [] [] [] [] | - procps-ng | [] [] | - procps-ng-man | [] [] | - psmisc | [] [] [] [] [] [] [] | - pspp | [] [] [] | - pushover | () [] [] [] | - pwdutils | [] [] [] | - pyspread | [] [] [] | - radius | [] [] | - recode | [] [] [] [] [] [] [] | - recutils | [] [] [] [] | - rpm | [] [] [] [] [] | - rush | [] [] [] | - sarg | [] [] | - sed | [] [] [] [] [] [] [] [] | - sharutils | [] [] [] [] | - shishi | [] [] [] | - skribilo | [] [] | - solfege | [] [] [] [] [] [] [] [] | - solfege-manual | [] [] [] [] [] | - spotmachine | [] [] [] [] | - sudo | [] [] [] [] [] [] | - sudoers | [] [] [] [] [] [] | - sysstat | [] [] [] [] [] [] | - tar | [] [] [] [] [] [] [] | - texinfo | [] [] [] [] [] | - texinfo_document | [] [] [] [] | - tigervnc | [] [] [] [] [] [] | - tin | [] [] [] [] | - tin-man | [] | - tracgoogleappsa... | [] [] [] [] [] | - trader | [] [] [] [] [] [] | - util-linux | [] [] [] [] | - ve | [] [] [] [] [] | - vice | () () () | - vmm | [] [] | - vorbis-tools | [] [] [] [] | - wastesedge | [] () | - wcd | [] [] [] [] | - wcd-man | [] | - wdiff | [] [] [] [] [] [] [] | - wget | [] [] [] [] [] [] | - wyslij-po | [] [] [] [] | - xboard | [] [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] [] [] [] | - +--------------------------------------------------+ - da de el en en_GB en_ZA eo es et eu fa fi fr - 120 130 32 1 6 0 94 95 22 13 4 103 136 - - ga gd gl gu he hi hr hu hy ia id is it ja ka kk - +-------------------------------------------------+ - a2ps | [] [] [] [] | - aegis | [] | - anubis | [] [] [] [] | - aspell | [] [] [] [] [] | - bash | [] [] [] | - bfd | [] [] | - binutils | [] [] [] | - bison | [] | - bison-runtime | [] [] [] [] [] [] [] [] | - buzztrax | | - ccd2cue | [] | - ccide | [] [] | - cflow | [] [] [] | - clisp | | - coreutils | [] [] [] | - cpio | [] [] [] [] [] [] | - cppi | [] [] [] [] [] | - cpplib | [] [] | - cryptsetup | [] | - datamash | | - denemo | [] | - dfarc | [] [] [] | - dialog | [] [] [] [] [] [] [] [] [] [] | - dico | | - diffutils | [] [] [] [] | - dink | [] | - direvent | [] | - doodle | [] [] | - dos2unix | [] [] | - dos2unix-man | | - e2fsprogs | [] | - enscript | [] [] [] | - exif | [] [] [] [] [] [] | - fetchmail | [] [] [] | - findutils | [] [] [] [] [] [] [] | - flex | [] | - freedink | [] [] [] [] | - fusionforge | | - gas | [] | - gawk | [] () [] | - gcal | | - gcc | | - gdbm | | - gettext-examples | [] [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] [] | - gettext-tools | [] [] [] | - gjay | [] | - glunarclock | [] [] [] [] [] [] | - gnubiff | [] [] () | - gnubik | [] [] [] | - gnucash | () () () () () [] | - gnuchess | | - gnulib | [] [] [] [] [] | - gnunet | | - gnunet-gtk | | - gold | [] [] | - gphoto2 | [] [] [] [] | - gprof | [] [] [] [] | - gramadoir | [] [] [] | - grep | [] [] [] [] [] [] [] | - grub | [] [] [] | - gsasl | [] [] [] [] [] | - gss | [] [] [] [] [] | - gst-plugins-bad | [] | - gst-plugins-base | [] [] [] [] | - gst-plugins-good | [] [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] | - gtick | [] [] [] [] [] | - gtkam | [] [] [] [] [] | - gtkspell | [] [] [] [] [] [] [] [] [] [] | - guix | | - guix-packages | | - gutenprint | [] [] [] | - hello | [] [] [] [] [] | - help2man | [] [] [] | - help2man-texi | | - hylafax | [] | - idutils | [] [] | - iso_15924 | [] [] [] [] [] [] | - iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] | - iso_3166_2 | [] [] | - iso_4217 | [] [] [] [] [] [] | - iso_639 | [] [] [] [] [] [] [] [] [] | - iso_639_3 | [] [] | - iso_639_5 | | - jwhois | [] [] [] [] | - kbd | [] [] [] | - klavaro | [] [] [] [] [] | - latrine | [] | - ld | [] [] [] [] | - leafpad | [] [] [] [] [] [] [] () | - libc | [] [] [] [] [] | - libexif | [] | - libextractor | | - libgnutls | [] | - libgphoto2 | [] [] | - libgphoto2_port | [] [] | - libgsasl | [] [] [] [] | - libiconv | [] [] [] [] [] [] [] | - libidn | [] [] [] [] | - liferea | [] [] [] [] [] | - lilypond | [] | - lordsawar | | - lprng | [] | - lynx | [] [] [] [] | - m4 | [] [] [] [] [] | - mailfromd | | - mailutils | | - make | [] [] [] [] | - man-db | [] [] | - man-db-manpages | [] [] | - midi-instruments | [] [] [] [] [] [] [] [] [] | - minicom | [] [] [] | - mkisofs | [] [] | - myserver | [] | - nano | [] [] [] [] [] | - opcodes | [] [] [] | - parted | [] [] [] [] | - pies | | - popt | [] [] [] [] [] [] [] [] [] [] | - procps-ng | | - procps-ng-man | | - psmisc | [] [] [] [] | - pspp | [] [] | - pushover | [] | - pwdutils | [] | - pyspread | | - radius | [] | - recode | [] [] [] [] [] [] [] | - recutils | | - rpm | [] | - rush | [] | - sarg | | - sed | [] [] [] [] [] [] [] | - sharutils | | - shishi | | - skribilo | [] | - solfege | [] [] | - solfege-manual | | - spotmachine | | - sudo | [] [] [] [] | - sudoers | [] [] [] | - sysstat | [] [] [] | - tar | [] [] [] [] [] [] | - texinfo | [] [] [] | - texinfo_document | [] [] | - tigervnc | | - tin | | - tin-man | | - tracgoogleappsa... | [] [] [] [] | - trader | [] [] | - util-linux | [] | - ve | [] | - vice | () () | - vmm | | - vorbis-tools | [] [] | - wastesedge | () | - wcd | | - wcd-man | | - wdiff | [] [] [] | - wget | [] [] [] | - wyslij-po | [] [] [] | - xboard | | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] [] | - +-------------------------------------------------+ - ga gd gl gu he hi hr hu hy ia id is it ja ka kk - 35 2 47 4 8 2 53 69 2 6 80 11 86 58 0 3 - - kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl - +--------------------------------------------------+ - a2ps | [] [] | - aegis | [] | - anubis | [] [] [] | - aspell | [] [] | - bash | [] [] | - bfd | | - binutils | | - bison | [] | - bison-runtime | [] [] [] [] [] [] | - buzztrax | | - ccd2cue | | - ccide | [] [] | - cflow | [] | - clisp | [] | - coreutils | [] [] | - cpio | [] | - cppi | | - cpplib | [] | - cryptsetup | [] | - datamash | [] [] | - denemo | | - dfarc | [] [] | - dialog | [] [] [] [] [] [] | - dico | | - diffutils | [] [] [] | - dink | [] | - direvent | [] | - doodle | [] | - dos2unix | [] [] | - dos2unix-man | [] | - e2fsprogs | [] | - enscript | [] | - exif | [] [] | - fetchmail | [] | - findutils | [] [] | - flex | [] | - freedink | [] [] | - fusionforge | | - gas | | - gawk | [] | - gcal | | - gcc | | - gdbm | | - gettext-examples | [] [] [] [] [] [] | - gettext-runtime | [] [] | - gettext-tools | [] | - gjay | | - glunarclock | [] [] | - gnubiff | [] | - gnubik | [] [] | - gnucash | () () () () () () () [] | - gnuchess | [] [] | - gnulib | [] | - gnunet | | - gnunet-gtk | | - gold | | - gphoto2 | [] | - gprof | [] [] | - gramadoir | [] | - grep | [] [] | - grub | [] [] [] | - gsasl | [] | - gss | | - gst-plugins-bad | [] [] | - gst-plugins-base | [] [] [] | - gst-plugins-good | [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] | - gstreamer | [] [] | - gtick | [] | - gtkam | [] [] | - gtkspell | [] [] [] [] [] [] [] | - guix | | - guix-packages | | - gutenprint | [] | - hello | [] [] [] | - help2man | [] | - help2man-texi | | - hylafax | [] | - idutils | [] | - iso_15924 | () [] [] | - iso_3166 | [] [] [] () [] [] [] [] [] [] | - iso_3166_2 | () [] | - iso_4217 | () [] [] [] | - iso_639 | [] [] () [] [] [] [] | - iso_639_3 | [] () [] | - iso_639_5 | () | - jwhois | [] [] | - kbd | [] | - klavaro | [] [] | - latrine | | - ld | | - leafpad | [] [] [] [] [] | - libc | [] [] | - libexif | [] | - libextractor | [] | - libgnutls | [] [] | - libgphoto2 | [] | - libgphoto2_port | [] | - libgsasl | [] | - libiconv | [] [] | - libidn | [] | - liferea | [] [] [] | - lilypond | [] | - lordsawar | | - lprng | | - lynx | [] | - m4 | [] | - mailfromd | | - mailutils | | - make | [] [] | - man-db | [] | - man-db-manpages | [] | - midi-instruments | [] [] [] [] [] [] [] | - minicom | [] | - mkisofs | [] | - myserver | | - nano | [] [] [] | - opcodes | [] | - parted | [] | - pies | | - popt | [] [] [] [] [] | - procps-ng | | - procps-ng-man | | - psmisc | [] | - pspp | [] [] | - pushover | | - pwdutils | [] | - pyspread | | - radius | [] | - recode | [] [] | - recutils | [] | - rpm | [] | - rush | [] | - sarg | | - sed | [] [] | - sharutils | [] | - shishi | | - skribilo | | - solfege | [] [] | - solfege-manual | [] | - spotmachine | [] | - sudo | [] [] | - sudoers | [] [] | - sysstat | [] [] | - tar | [] [] [] | - texinfo | [] | - texinfo_document | [] | - tigervnc | [] | - tin | | - tin-man | | - tracgoogleappsa... | [] [] [] | - trader | [] | - util-linux | [] | - ve | [] | - vice | [] | - vmm | [] | - vorbis-tools | [] | - wastesedge | [] | - wcd | [] | - wcd-man | [] | - wdiff | [] | - wget | [] [] | - wyslij-po | [] | - xboard | [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] | - +--------------------------------------------------+ - kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl - 5 11 4 6 0 13 22 3 3 3 4 11 2 40 1 124 - - nn or os pa pl ps pt pt_BR ro ru rw sk sl sq sr - +--------------------------------------------------+ - a2ps | [] [] [] [] [] [] [] | - aegis | [] [] | - anubis | [] [] [] | - aspell | [] [] [] [] [] [] [] | - bash | [] [] [] [] [] | - bfd | [] | - binutils | [] [] | - bison | [] [] [] | - bison-runtime | [] [] [] [] [] [] [] [] | - buzztrax | | - ccd2cue | [] | - ccide | [] [] [] | - cflow | [] [] | - clisp | [] | - coreutils | [] [] [] [] | - cpio | [] [] [] | - cppi | [] [] [] | - cpplib | [] [] [] | - cryptsetup | [] [] | - datamash | [] [] | - denemo | | - dfarc | [] [] [] | - dialog | [] [] [] [] [] [] [] | - dico | [] | - diffutils | [] [] | - dink | | - direvent | [] [] | - doodle | [] [] | - dos2unix | [] [] [] [] | - dos2unix-man | [] [] | - e2fsprogs | [] | - enscript | [] [] [] [] [] [] | - exif | [] [] [] [] [] [] | - fetchmail | [] [] [] | - findutils | [] [] [] [] [] | - flex | [] [] [] [] [] | - freedink | [] [] [] [] [] | - fusionforge | | - gas | | - gawk | [] | - gcal | | - gcc | | - gdbm | [] [] [] | - gettext-examples | [] [] [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] [] [] [] | - gettext-tools | [] [] [] [] [] [] [] | - gjay | [] | - glunarclock | [] [] [] [] [] [] | - gnubiff | [] | - gnubik | [] [] [] [] | - gnucash | () () () () [] | - gnuchess | [] [] | - gnulib | [] [] [] [] [] | - gnunet | | - gnunet-gtk | | - gold | | - gphoto2 | [] [] [] [] [] | - gprof | [] [] [] [] | - gramadoir | [] [] | - grep | [] [] [] [] [] [] | - grub | [] [] [] [] [] | - gsasl | [] [] [] | - gss | [] [] [] [] | - gst-plugins-bad | [] [] [] [] | - gst-plugins-base | [] [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] [] [] | - gtick | [] [] [] [] [] | - gtkam | [] [] [] [] [] [] | - gtkspell | [] [] [] [] [] [] [] [] [] | - guix | | - guix-packages | | - gutenprint | [] [] | - hello | [] [] [] [] [] [] | - help2man | [] [] [] [] | - help2man-texi | [] | - hylafax | | - idutils | [] [] [] | - iso_15924 | [] () [] [] [] [] | - iso_3166 | [] [] [] [] () [] [] [] [] [] [] [] [] | - iso_3166_2 | [] () [] | - iso_4217 | [] [] () [] [] [] [] [] | - iso_639 | [] [] [] () [] [] [] [] [] [] | - iso_639_3 | [] () | - iso_639_5 | () [] | - jwhois | [] [] [] [] | - kbd | [] [] | - klavaro | [] [] [] [] [] | - latrine | [] | - ld | | - leafpad | [] [] [] [] [] [] [] [] [] | - libc | [] [] [] | - libexif | [] () [] | - libextractor | [] | - libgnutls | [] | - libgphoto2 | [] | - libgphoto2_port | [] [] [] [] [] | - libgsasl | [] [] [] [] | - libiconv | [] [] [] [] [] | - libidn | [] [] [] | - liferea | [] [] [] [] () [] [] | - lilypond | | - lordsawar | | - lprng | [] | - lynx | [] [] | - m4 | [] [] [] [] [] | - mailfromd | [] | - mailutils | [] | - make | [] [] [] | - man-db | [] [] [] | - man-db-manpages | [] [] [] | - midi-instruments | [] [] [] [] [] [] [] [] | - minicom | [] [] [] [] | - mkisofs | [] [] [] | - myserver | [] [] | - nano | [] [] [] [] [] [] | - opcodes | | - parted | [] [] [] [] [] [] | - pies | [] | - popt | [] [] [] [] [] [] | - procps-ng | [] | - procps-ng-man | [] | - psmisc | [] [] [] [] | - pspp | [] [] | - pushover | | - pwdutils | [] | - pyspread | [] [] | - radius | [] [] | - recode | [] [] [] [] [] [] [] [] | - recutils | [] | - rpm | [] | - rush | [] [] [] | - sarg | [] [] | - sed | [] [] [] [] [] [] [] [] | - sharutils | [] [] [] | - shishi | [] [] | - skribilo | | - solfege | [] [] [] | - solfege-manual | [] [] | - spotmachine | [] [] | - sudo | [] [] [] [] [] [] | - sudoers | [] [] [] [] | - sysstat | [] [] [] [] [] | - tar | [] [] [] [] [] | - texinfo | [] [] [] | - texinfo_document | [] [] | - tigervnc | [] | - tin | [] | - tin-man | | - tracgoogleappsa... | [] [] [] [] | - trader | [] | - util-linux | [] [] | - ve | [] [] [] | - vice | | - vmm | | - vorbis-tools | [] [] [] | - wastesedge | | - wcd | | - wcd-man | | - wdiff | [] [] [] [] [] | - wget | [] [] [] [] | - wyslij-po | [] [] [] [] | - xboard | [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] | - +--------------------------------------------------+ - nn or os pa pl ps pt pt_BR ro ru rw sk sl sq sr - 7 3 1 6 114 1 12 83 32 80 3 38 45 7 94 - - sv sw ta te tg th tr uk ur vi wa wo zh_CN zh_HK - +---------------------------------------------------+ - a2ps | [] [] [] [] [] | - aegis | [] | - anubis | [] [] [] [] | - aspell | [] [] [] [] | - bash | [] [] [] [] | - bfd | [] [] | - binutils | [] [] [] | - bison | [] [] [] [] | - bison-runtime | [] [] [] [] [] [] | - buzztrax | [] [] [] | - ccd2cue | [] [] [] | - ccide | [] [] [] [] | - cflow | [] [] [] [] | - clisp | | - coreutils | [] [] [] [] | - cpio | [] [] [] [] [] | - cppi | [] [] [] [] | - cpplib | [] [] [] [] [] | - cryptsetup | [] [] [] | - datamash | [] [] [] | - denemo | | - dfarc | [] | - dialog | [] [] [] [] [] [] | - dico | [] | - diffutils | [] [] [] [] [] | - dink | | - direvent | [] [] | - doodle | [] [] | - dos2unix | [] [] [] [] | - dos2unix-man | [] [] [] | - e2fsprogs | [] [] [] [] | - enscript | [] [] [] [] | - exif | [] [] [] [] [] | - fetchmail | [] [] [] [] | - findutils | [] [] [] [] [] | - flex | [] [] [] [] | - freedink | [] [] | - fusionforge | | - gas | [] | - gawk | [] [] | - gcal | [] [] | - gcc | [] [] | - gdbm | [] [] | - gettext-examples | [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] | - gettext-tools | [] [] [] [] [] | - gjay | [] [] | - glunarclock | [] [] [] [] | - gnubiff | [] [] | - gnubik | [] [] [] [] | - gnucash | () () () () [] | - gnuchess | [] [] | - gnulib | [] [] [] [] | - gnunet | | - gnunet-gtk | | - gold | [] [] | - gphoto2 | [] [] [] [] | - gprof | [] [] [] [] | - gramadoir | [] [] [] | - grep | [] [] [] [] [] | - grub | [] [] [] [] | - gsasl | [] [] [] [] | - gss | [] [] [] | - gst-plugins-bad | [] [] [] [] | - gst-plugins-base | [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] | - gstreamer | [] [] [] [] [] | - gtick | [] [] [] | - gtkam | [] [] [] [] | - gtkspell | [] [] [] [] [] [] [] [] | - guix | [] | - guix-packages | | - gutenprint | [] [] [] [] | - hello | [] [] [] [] [] [] | - help2man | [] [] [] | - help2man-texi | [] | - hylafax | [] | - idutils | [] [] [] | - iso_15924 | [] () [] [] () [] | - iso_3166 | [] [] () [] [] () [] [] [] | - iso_3166_2 | () [] [] () [] | - iso_4217 | [] () [] [] () [] [] | - iso_639 | [] [] [] () [] [] () [] [] [] | - iso_639_3 | [] () [] [] () | - iso_639_5 | () [] () | - jwhois | [] [] [] [] | - kbd | [] [] [] | - klavaro | [] [] [] [] [] [] | - latrine | [] [] | - ld | [] [] [] [] [] | - leafpad | [] [] [] [] [] [] | - libc | [] [] [] [] [] | - libexif | [] () | - libextractor | [] [] | - libgnutls | [] [] [] [] | - libgphoto2 | [] [] | - libgphoto2_port | [] [] [] [] | - libgsasl | [] [] [] [] | - libiconv | [] [] [] [] [] | - libidn | () [] [] [] | - liferea | [] [] [] [] [] | - lilypond | [] | - lordsawar | | - lprng | [] | - lynx | [] [] [] [] | - m4 | [] [] [] | - mailfromd | [] [] | - mailutils | [] | - make | [] [] [] [] | - man-db | [] [] | - man-db-manpages | [] | - midi-instruments | [] [] [] [] [] [] | - minicom | [] [] | - mkisofs | [] [] [] | - myserver | [] | - nano | [] [] [] [] | - opcodes | [] [] [] | - parted | [] [] [] [] [] | - pies | [] [] | - popt | [] [] [] [] [] [] [] | - procps-ng | [] [] | - procps-ng-man | [] | - psmisc | [] [] [] [] | - pspp | [] [] [] | - pushover | [] | - pwdutils | [] [] | - pyspread | [] | - radius | [] [] | - recode | [] [] [] [] | - recutils | [] [] [] | - rpm | [] [] [] [] | - rush | [] [] | - sarg | | - sed | [] [] [] [] [] | - sharutils | [] [] [] | - shishi | [] [] | - skribilo | [] | - solfege | [] [] [] | - solfege-manual | [] | - spotmachine | [] [] [] | - sudo | [] [] [] [] | - sudoers | [] [] [] | - sysstat | [] [] [] [] [] | - tar | [] [] [] [] [] | - texinfo | [] [] [] | - texinfo_document | [] | - tigervnc | [] [] | - tin | [] | - tin-man | | - tracgoogleappsa... | [] [] [] [] [] | - trader | [] | - util-linux | [] [] [] | - ve | [] [] [] [] | - vice | () () | - vmm | | - vorbis-tools | [] [] | - wastesedge | | - wcd | [] [] [] | - wcd-man | [] | - wdiff | [] [] [] [] | - wget | [] [] [] | - wyslij-po | [] [] | - xboard | [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] | - +---------------------------------------------------+ - sv sw ta te tg th tr uk ur vi wa wo zh_CN zh_HK - 91 1 4 3 0 13 50 113 1 126 7 1 95 7 - - zh_TW - +-------+ - a2ps | | 30 - aegis | | 9 - anubis | | 19 - aspell | | 28 - bash | [] | 21 - bfd | | 9 - binutils | | 12 - bison | [] | 18 - bison-runtime | [] | 38 - buzztrax | | 8 - ccd2cue | | 8 - ccide | | 17 - cflow | | 15 - clisp | | 10 - coreutils | | 20 - cpio | | 20 - cppi | | 17 - cpplib | [] | 19 - cryptsetup | | 13 - datamash | | 11 - denemo | | 4 - dfarc | | 16 - dialog | [] | 42 - dico | | 6 - diffutils | | 21 - dink | | 9 - direvent | | 10 - doodle | | 12 - dos2unix | [] | 18 - dos2unix-man | | 9 - e2fsprogs | | 14 - enscript | | 21 - exif | | 26 - fetchmail | | 19 - findutils | | 28 - flex | [] | 19 - freedink | | 23 - fusionforge | | 3 - gas | | 5 - gawk | | 12 - gcal | | 7 - gcc | | 4 - gdbm | | 10 - gettext-examples | [] | 40 - gettext-runtime | [] | 34 - gettext-tools | [] | 24 - gjay | | 8 - glunarclock | [] | 27 - gnubiff | | 9 - gnubik | | 19 - gnucash | () | 7 - gnuchess | | 10 - gnulib | | 23 - gnunet | | 1 - gnunet-gtk | | 1 - gold | | 7 - gphoto2 | [] | 19 - gprof | | 21 - gramadoir | | 14 - grep | [] | 31 - grub | | 21 - gsasl | [] | 19 - gss | | 17 - gst-plugins-bad | | 14 - gst-plugins-base | | 27 - gst-plugins-good | | 32 - gst-plugins-ugly | | 34 - gstreamer | [] | 31 - gtick | | 19 - gtkam | | 24 - gtkspell | [] | 48 - guix | | 3 - guix-packages | | 0 - gutenprint | | 15 - hello | [] | 30 - help2man | | 18 - help2man-texi | | 5 - hylafax | | 5 - idutils | | 14 - iso_15924 | [] | 23 - iso_3166 | [] | 58 - iso_3166_2 | | 9 - iso_4217 | [] | 28 - iso_639 | [] | 46 - iso_639_3 | | 10 - iso_639_5 | | 2 - jwhois | [] | 20 - kbd | | 16 - klavaro | | 30 - latrine | | 7 - ld | [] | 15 - leafpad | [] | 40 - libc | [] | 24 - libexif | | 9 - libextractor | | 5 - libgnutls | | 13 - libgphoto2 | | 9 - libgphoto2_port | [] | 19 - libgsasl | | 18 - libiconv | [] | 29 - libidn | | 17 - liferea | | 29 - lilypond | | 11 - lordsawar | | 3 - lprng | | 3 - lynx | | 19 - m4 | [] | 22 - mailfromd | | 4 - mailutils | | 6 - make | | 19 - man-db | | 14 - man-db-manpages | | 9 - midi-instruments | [] | 43 - minicom | [] | 17 - mkisofs | | 13 - myserver | | 9 - nano | [] | 29 - opcodes | | 12 - parted | [] | 21 - pies | | 4 - popt | [] | 36 - procps-ng | | 5 - procps-ng-man | | 4 - psmisc | [] | 22 - pspp | | 13 - pushover | | 6 - pwdutils | | 8 - pyspread | | 6 - radius | | 9 - recode | | 31 - recutils | | 9 - rpm | [] | 13 - rush | | 10 - sarg | | 4 - sed | [] | 34 - sharutils | | 12 - shishi | | 7 - skribilo | | 4 - solfege | | 19 - solfege-manual | | 9 - spotmachine | | 10 - sudo | | 24 - sudoers | | 20 - sysstat | | 22 - tar | [] | 30 - texinfo | | 17 - texinfo_document | | 11 - tigervnc | | 11 - tin | [] | 7 - tin-man | | 1 - tracgoogleappsa... | [] | 22 - trader | | 11 - util-linux | | 12 - ve | | 14 - vice | | 1 - vmm | | 3 - vorbis-tools | | 13 - wastesedge | | 2 - wcd | | 8 - wcd-man | | 3 - wdiff | [] | 23 - wget | | 19 - wyslij-po | | 14 - xboard | | 9 - xdg-user-dirs | [] | 68 - xkeyboard-config | [] | 27 - +-------+ - 90 teams zh_TW - 166 domains 42 2748 - - Some counters in the preceding matrix are higher than the number of -visible blocks let us expect. This is because a few extra PO files are -used for implementing regional variants of languages, or language -dialects. - - For a PO file in the matrix above to be effective, the package to -which it applies should also have been internationalized and distributed -as such by its maintainer. There might be an observable lag between the -mere existence a PO file and its wide availability in a distribution. - - If Jun 2014 seems to be old, you may fetch a more recent copy of this -'ABOUT-NLS' file on most GNU archive sites. The most up-to-date matrix -with full percentage details can be found at -'http://translationproject.org/extra/matrix.html'. - -1.5 Using 'gettext' in new packages -=================================== - -If you are writing a freely available program and want to -internationalize it you are welcome to use GNU 'gettext' in your -package. Of course you have to respect the GNU Lesser General Public -License which covers the use of the GNU 'gettext' library. This means -in particular that even non-free programs can use 'libintl' as a shared -library, whereas only free software can use 'libintl' as a static -library or use modified versions of 'libintl'. - - Once the sources are changed appropriately and the setup can handle -the use of 'gettext' the only thing missing are the translations. The -Free Translation Project is also available for packages which are not -developed inside the GNU project. Therefore the information given above -applies also for every other Free Software Project. Contact -'coordinator@translationproject.org' to make the '.pot' files available -to the translation teams. diff -Nru eog-3.26.2/aclocal.m4 eog-3.27.90/aclocal.m4 --- eog-3.26.2/aclocal.m4 2017-11-08 19:35:57.000000000 +0000 +++ eog-3.27.90/aclocal.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,2275 +0,0 @@ -# generated automatically by aclocal 1.15.1 -*- Autoconf -*- - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. - -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, -[m4_warning([this file was generated for autoconf 2.69. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically 'autoreconf'.])]) - -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 11 (pkg-config-0.29.1) - -dnl Copyright © 2004 Scott James Remnant . -dnl Copyright © 2012-2015 Dan Nicholson -dnl -dnl This program is free software; you can redistribute it and/or modify -dnl it under the terms of the GNU General Public License as published by -dnl the Free Software Foundation; either version 2 of the License, or -dnl (at your option) any later version. -dnl -dnl This program is distributed in the hope that it will be useful, but -dnl WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl General Public License for more details. -dnl -dnl You should have received a copy of the GNU General Public License -dnl along with this program; if not, write to the Free Software -dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -dnl 02111-1307, USA. -dnl -dnl As a special exception to the GNU General Public License, if you -dnl distribute this file as part of a program that contains a -dnl configuration script generated by Autoconf, you may include it under -dnl the same distribution terms that you use for the rest of that -dnl program. - -dnl PKG_PREREQ(MIN-VERSION) -dnl ----------------------- -dnl Since: 0.29 -dnl -dnl Verify that the version of the pkg-config macros are at least -dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's -dnl installed version of pkg-config, this checks the developer's version -dnl of pkg.m4 when generating configure. -dnl -dnl To ensure that this macro is defined, also add: -dnl m4_ifndef([PKG_PREREQ], -dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) -dnl -dnl See the "Since" comment for each macro you use to see what version -dnl of the macros you require. -m4_defun([PKG_PREREQ], -[m4_define([PKG_MACROS_VERSION], [0.29.1]) -m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, - [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) -])dnl PKG_PREREQ - -dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) -dnl ---------------------------------- -dnl Since: 0.16 -dnl -dnl Search for the pkg-config tool and set the PKG_CONFIG variable to -dnl first found in the path. Checks that the version of pkg-config found -dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is -dnl used since that's the first version where most current features of -dnl pkg-config existed. -AC_DEFUN([PKG_PROG_PKG_CONFIG], -[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) -m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) -AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) -AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=m4_default([$1], [0.9.0]) - AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi -fi[]dnl -])dnl PKG_PROG_PKG_CONFIG - -dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -dnl ------------------------------------------------------------------- -dnl Since: 0.18 -dnl -dnl Check to see whether a particular set of modules exists. Similar to -dnl PKG_CHECK_MODULES(), but does not set variables or print errors. -dnl -dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -dnl only at the first occurence in configure.ac, so if the first place -dnl it's called might be skipped (such as if it is within an "if", you -dnl have to call PKG_CHECK_EXISTS manually -AC_DEFUN([PKG_CHECK_EXISTS], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_default([$2], [:]) -m4_ifvaln([$3], [else - $3])dnl -fi]) - -dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -dnl --------------------------------------------- -dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting -dnl pkg_failed based on the result. -m4_define([_PKG_CONFIG], -[if test -n "$$1"; then - pkg_cv_[]$1="$$1" - elif test -n "$PKG_CONFIG"; then - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes ], - [pkg_failed=yes]) - else - pkg_failed=untried -fi[]dnl -])dnl _PKG_CONFIG - -dnl _PKG_SHORT_ERRORS_SUPPORTED -dnl --------------------------- -dnl Internal check to see if pkg-config supports short errors. -AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi[]dnl -])dnl _PKG_SHORT_ERRORS_SUPPORTED - - -dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -dnl [ACTION-IF-NOT-FOUND]) -dnl -------------------------------------------------------------- -dnl Since: 0.4.0 -dnl -dnl Note that if there is a possibility the first call to -dnl PKG_CHECK_MODULES might not happen, you should be sure to include an -dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -AC_DEFUN([PKG_CHECK_MODULES], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl -AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl - -pkg_failed=no -AC_MSG_CHECKING([for $1]) - -_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) -_PKG_CONFIG([$1][_LIBS], [libs], [$2]) - -m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS -and $1[]_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details.]) - -if test $pkg_failed = yes; then - AC_MSG_RESULT([no]) - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - - m4_default([$4], [AC_MSG_ERROR( -[Package requirements ($2) were not met: - -$$1_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -_PKG_TEXT])[]dnl - ]) -elif test $pkg_failed = untried; then - AC_MSG_RESULT([no]) - m4_default([$4], [AC_MSG_FAILURE( -[The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -_PKG_TEXT - -To get pkg-config, see .])[]dnl - ]) -else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) - $3 -fi[]dnl -])dnl PKG_CHECK_MODULES - - -dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -dnl [ACTION-IF-NOT-FOUND]) -dnl --------------------------------------------------------------------- -dnl Since: 0.29 -dnl -dnl Checks for existence of MODULES and gathers its build flags with -dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags -dnl and VARIABLE-PREFIX_LIBS from --libs. -dnl -dnl Note that if there is a possibility the first call to -dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to -dnl include an explicit call to PKG_PROG_PKG_CONFIG in your -dnl configure.ac. -AC_DEFUN([PKG_CHECK_MODULES_STATIC], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -_save_PKG_CONFIG=$PKG_CONFIG -PKG_CONFIG="$PKG_CONFIG --static" -PKG_CHECK_MODULES($@) -PKG_CONFIG=$_save_PKG_CONFIG[]dnl -])dnl PKG_CHECK_MODULES_STATIC - - -dnl PKG_INSTALLDIR([DIRECTORY]) -dnl ------------------------- -dnl Since: 0.27 -dnl -dnl Substitutes the variable pkgconfigdir as the location where a module -dnl should install pkg-config .pc files. By default the directory is -dnl $libdir/pkgconfig, but the default can be changed by passing -dnl DIRECTORY. The user can override through the --with-pkgconfigdir -dnl parameter. -AC_DEFUN([PKG_INSTALLDIR], -[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) -m4_pushdef([pkg_description], - [pkg-config installation directory @<:@]pkg_default[@:>@]) -AC_ARG_WITH([pkgconfigdir], - [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, - [with_pkgconfigdir=]pkg_default) -AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) -m4_popdef([pkg_default]) -m4_popdef([pkg_description]) -])dnl PKG_INSTALLDIR - - -dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) -dnl -------------------------------- -dnl Since: 0.27 -dnl -dnl Substitutes the variable noarch_pkgconfigdir as the location where a -dnl module should install arch-independent pkg-config .pc files. By -dnl default the directory is $datadir/pkgconfig, but the default can be -dnl changed by passing DIRECTORY. The user can override through the -dnl --with-noarch-pkgconfigdir parameter. -AC_DEFUN([PKG_NOARCH_INSTALLDIR], -[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) -m4_pushdef([pkg_description], - [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) -AC_ARG_WITH([noarch-pkgconfigdir], - [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, - [with_noarch_pkgconfigdir=]pkg_default) -AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) -m4_popdef([pkg_default]) -m4_popdef([pkg_description]) -])dnl PKG_NOARCH_INSTALLDIR - - -dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, -dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -dnl ------------------------------------------- -dnl Since: 0.28 -dnl -dnl Retrieves the value of the pkg-config variable for the given module. -AC_DEFUN([PKG_CHECK_VAR], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl - -_PKG_CONFIG([$1], [variable="][$3]["], [$2]) -AS_VAR_COPY([$1], [pkg_cv_][$1]) - -AS_VAR_IF([$1], [""], [$5], [$4])dnl -])dnl PKG_CHECK_VAR - -dnl PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES, -dnl [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND], -dnl [DESCRIPTION], [DEFAULT]) -dnl ------------------------------------------ -dnl -dnl Prepare a "--with-" configure option using the lowercase -dnl [VARIABLE-PREFIX] name, merging the behaviour of AC_ARG_WITH and -dnl PKG_CHECK_MODULES in a single macro. -AC_DEFUN([PKG_WITH_MODULES], -[ -m4_pushdef([with_arg], m4_tolower([$1])) - -m4_pushdef([description], - [m4_default([$5], [build with ]with_arg[ support])]) - -m4_pushdef([def_arg], [m4_default([$6], [auto])]) -m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes]) -m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no]) - -m4_case(def_arg, - [yes],[m4_pushdef([with_without], [--without-]with_arg)], - [m4_pushdef([with_without],[--with-]with_arg)]) - -AC_ARG_WITH(with_arg, - AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),, - [AS_TR_SH([with_]with_arg)=def_arg]) - -AS_CASE([$AS_TR_SH([with_]with_arg)], - [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)], - [auto],[PKG_CHECK_MODULES([$1],[$2], - [m4_n([def_action_if_found]) $3], - [m4_n([def_action_if_not_found]) $4])]) - -m4_popdef([with_arg]) -m4_popdef([description]) -m4_popdef([def_arg]) - -])dnl PKG_WITH_MODULES - -dnl PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES, -dnl [DESCRIPTION], [DEFAULT]) -dnl ----------------------------------------------- -dnl -dnl Convenience macro to trigger AM_CONDITIONAL after PKG_WITH_MODULES -dnl check._[VARIABLE-PREFIX] is exported as make variable. -AC_DEFUN([PKG_HAVE_WITH_MODULES], -[ -PKG_WITH_MODULES([$1],[$2],,,[$3],[$4]) - -AM_CONDITIONAL([HAVE_][$1], - [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"]) -])dnl PKG_HAVE_WITH_MODULES - -dnl PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES, -dnl [DESCRIPTION], [DEFAULT]) -dnl ------------------------------------------------------ -dnl -dnl Convenience macro to run AM_CONDITIONAL and AC_DEFINE after -dnl PKG_WITH_MODULES check. HAVE_[VARIABLE-PREFIX] is exported as make -dnl and preprocessor variable. -AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES], -[ -PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4]) - -AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"], - [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])]) -])dnl PKG_HAVE_DEFINE_WITH_MODULES - -AC_DEFUN([YELP_HELP_INIT], -[ -AC_REQUIRE([AC_PROG_LN_S]) -m4_pattern_allow([AM_V_at]) -m4_pattern_allow([AM_V_GEN]) -m4_pattern_allow([AM_DEFAULT_VERBOSITY]) - -YELP_LC_MEDIA_LINKS=true -YELP_LC_DIST=true - -for yelpopt in [$1]; do - case $yelpopt in - lc-media-links) YELP_LC_MEDIA_LINKS=true ;; - no-lc-media-links) YELP_LC_MEDIA_LINKS= ;; - lc-dist) YELP_LC_DIST=true ;; - no-lc-dist) YELP_LC_DIST= ;; - *) AC_MSG_ERROR([Unrecognized [YELP_HELP_INIT] option $yelpopt"]) ;; - esac -done; -AC_SUBST([YELP_LC_MEDIA_LINKS]) -AC_SUBST([YELP_LC_DIST]) - -AC_ARG_WITH([help-dir], - AS_HELP_STRING([--with-help-dir=DIR], - [path where help files are installed]),, - [with_help_dir='${datadir}/help']) -HELP_DIR="$with_help_dir" -AC_SUBST(HELP_DIR) - -AC_ARG_VAR([ITSTOOL], [Path to the `itstool` command]) -AC_CHECK_PROG([ITSTOOL], [itstool], [itstool]) -if test x"$ITSTOOL" = x; then - AC_MSG_ERROR([itstool not found]) -fi - -AC_ARG_VAR([XMLLINT], [Path to the `xmllint` command]) -AC_CHECK_PROG([XMLLINT], [xmllint], [xmllint]) -if test x"$XMLLINT" = x; then - AC_MSG_ERROR([xmllint not found]) -fi - -YELP_HELP_RULES=' -HELP_ID ?= -HELP_POT ?= -HELP_FILES ?= -HELP_EXTRA ?= -HELP_MEDIA ?= -HELP_LINGUAS ?= - -_HELP_LINGUAS = $(if $(filter environment,$(origin LINGUAS)),$(filter $(LINGUAS),$(HELP_LINGUAS)),$(HELP_LINGUAS)) -_HELP_POTFILE = $(if $(HELP_POT),$(HELP_POT),$(if $(HELP_ID),$(HELP_ID).pot)) -_HELP_POFILES = $(if $(HELP_ID),$(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).po)) -_HELP_MOFILES = $(patsubst %.po,%.mo,$(_HELP_POFILES)) -_HELP_C_FILES = $(foreach f,$(HELP_FILES),C/$(f)) -_HELP_C_EXTRA = $(foreach f,$(HELP_EXTRA),C/$(f)) -_HELP_C_MEDIA = $(foreach f,$(HELP_MEDIA),C/$(f)) -_HELP_LC_FILES = $(foreach lc,$(_HELP_LINGUAS),$(foreach f,$(HELP_FILES),$(lc)/$(f))) -_HELP_LC_STAMPS = $(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).stamp) - -_HELP_DEFAULT_V = $(if $(AM_DEFAULT_VERBOSITY),$(AM_DEFAULT_VERBOSITY),1) -_HELP_V = $(if $(V),$(V),$(_HELP_DEFAULT_V)) -_HELP_LC_VERBOSE = $(_HELP_LC_VERBOSE_$(_HELP_V)) -_HELP_LC_VERBOSE_ = $(_HELP_LC_VERBOSE_$(_HELP_DEFAULT_V)) -_HELP_LC_VERBOSE_0 = @echo " GEN "$(dir [$]@); - -all: $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) $(_HELP_LC_FILES) $(_HELP_POFILES) - -.PHONY: pot -pot: $(_HELP_POTFILE) -$(_HELP_POTFILE): $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) - $(AM_V_GEN)if test -d "C"; then d=; else d="$(srcdir)/"; fi; \ - $(ITSTOOL) -o "[$]@" $(foreach f,$(_HELP_C_FILES),"$${d}$(f)") - -.PHONY: repo -repo: $(_HELP_POTFILE) - $(AM_V_at)for po in $(_HELP_POFILES); do \ - if test "x[$](_HELP_V)" = "x0"; then echo " GEN $${po}"; fi; \ - msgmerge -q -o "$${po}" "$${po}" "$(_HELP_POTFILE)"; \ - done - -$(_HELP_POFILES): - $(AM_V_at)if ! test -d "$(dir [$]@)"; then mkdir "$(dir [$]@)"; fi - $(AM_V_at)if test ! -f "[$]@" -a -f "$(srcdir)/[$]@"; then cp "$(srcdir)/[$]@" "[$]@"; fi - $(AM_V_GEN)if ! test -f "[$]@"; then \ - (cd "$(dir [$]@)" && \ - $(ITSTOOL) -o "$(notdir [$]@).tmp" $(_HELP_C_FILES) && \ - mv "$(notdir [$]@).tmp" "$(notdir [$]@)"); \ - else \ - (cd "$(dir [$]@)" && \ - $(ITSTOOL) -o "$(notdir [$]@).tmp" $(_HELP_C_FILES) && \ - msgmerge -o "$(notdir [$]@)" "$(notdir [$]@)" "$(notdir [$]@).tmp" && \ - rm "$(notdir [$]@).tmp"); \ - fi - -$(_HELP_MOFILES): %.mo: %.po - $(AM_V_at)if ! test -d "$(dir [$]@)"; then mkdir "$(dir [$]@)"; fi - $(AM_V_GEN)msgfmt -o "[$]@" "$<" - -$(_HELP_LC_FILES): $(_HELP_LINGUAS) -$(_HELP_LINGUAS): $(_HELP_LC_STAMPS) -$(_HELP_LC_STAMPS): %.stamp: %.mo -$(_HELP_LC_STAMPS): $(_HELP_C_FILES) $(_HELP_C_EXTRA) - $(AM_V_at)if ! test -d "$(dir [$]@)"; then mkdir "$(dir [$]@)"; fi - $(_HELP_LC_VERBOSE)if test -d "C"; then d="../"; else d="$(abs_srcdir)/"; fi; \ - mo="$(dir [$]@)$(patsubst %/$(notdir [$]@),%,[$]@).mo"; \ - if test -f "$${mo}"; then mo="../$${mo}"; else mo="$(abs_srcdir)/$${mo}"; fi; \ - (cd "$(dir [$]@)" && $(ITSTOOL) -m "$${mo}" $(foreach f,$(_HELP_C_FILES),$${d}/$(f))) && \ - touch "[$]@" - -.PHONY: clean-help -mostlyclean-am: $(if $(HELP_ID),clean-help) -clean-help: - rm -f $(_HELP_LC_FILES) $(_HELP_LC_STAMPS) $(_HELP_MOFILES) - -EXTRA_DIST ?= -EXTRA_DIST += $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) -EXTRA_DIST += $(if $(YELP_LC_DIST),$(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).stamp)) -EXTRA_DIST += $(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).po) -EXTRA_DIST += $(foreach f,$(HELP_MEDIA),$(foreach lc,$(HELP_LINGUAS),$(wildcard $(lc)/$(f)))) - -distdir: distdir-help-files -distdir-help-files: $(_HELP_LC_FILES) - @for lc in C $(if $(YELP_LC_DIST),$(HELP_LINGUAS)) ; do \ - $(MKDIR_P) "$(distdir)/$$lc"; \ - for file in $(HELP_FILES); do \ - if test -f "$$lc/$$file"; then d=./; else d=$(srcdir)/; fi; \ - cp -p "$$d$$lc/$$file" "$(distdir)/$$lc/" || exit 1; \ - done; \ - done; \ - -.PHONY: check-help -check: check-help -check-help: - for lc in C $(_HELP_LINGUAS); do \ - if test -d "$$lc"; \ - then d=; \ - xmlpath="$$lc"; \ - else \ - d="$(srcdir)/"; \ - xmlpath="$$lc:$(srcdir)/$$lc"; \ - fi; \ - for page in $(HELP_FILES); do \ - echo "$(XMLLINT) --noout --noent --path $$xmlpath --xinclude $$d$$lc/$$page"; \ - $(XMLLINT) --noout --noent --path "$$xmlpath" --xinclude "$$d$$lc/$$page"; \ - done; \ - done - - -.PHONY: install-help -install-data-am: $(if $(HELP_ID),install-help) -install-help: $(_HELP_LC_FILES) - @for lc in C $(_HELP_LINGUAS); do \ - $(mkinstalldirs) "$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)" || exit 1; \ - done - @for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ - if test -f "$$lc/$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ - echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir`basename $$f`"; \ - $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir`basename $$f`" || exit 1; \ - done; done - @for f in $(_HELP_C_EXTRA); do \ - lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ - if test -f "$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ - echo "$(INSTALL_DATA) $$d$$f $$helpdir`basename $$f`"; \ - $(INSTALL_DATA) "$$d$$f" "$$helpdir`basename $$f`" || exit 1; \ - done - @for f in $(HELP_MEDIA); do \ - for lc in C $(_HELP_LINGUAS); do \ - if test -f "$$lc$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - mdir=`dirname "$$f"`; \ - if test "x$mdir" = "x."; then mdir=""; fi; \ - if ! test -d "$$helpdir$$mdir"; then $(mkinstalldirs) "$$helpdir$$mdir"; fi; \ - if test -f "$$d$$lc/$$f"; then \ - echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir$$f"; \ - $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir$$f" || exit 1; \ - elif test "x$$lc" != "xC"; then \ - if test "x$(YELP_LC_MEDIA_LINKS)" != "x"; then \ - echo "$(LN_S) -f $(HELP_DIR)/C/$(HELP_ID)/$$f $$helpdir$$f"; \ - $(LN_S) -f "$(HELP_DIR)/C/$(HELP_ID)/$$f" "$$helpdir$$f" || exit 1; \ - fi; \ - fi; \ - done; \ - done - -.PHONY: uninstall-help -uninstall-am: $(if $(HELP_ID),uninstall-help) -uninstall-help: - for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir`basename $$f`"; \ - rm -f "$$helpdir`basename $$f`"; \ - done; done - @for f in $(_HELP_C_EXTRA); do \ - lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir`basename $$f`"; \ - rm -f "$$helpdir`basename $$f`"; \ - done - @for f in $(HELP_MEDIA); do \ - for lc in C $(_HELP_LINGUAS); do \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir$$f"; \ - rm -f "$$helpdir$$f"; \ - done; \ - done; -' -AC_SUBST([YELP_HELP_RULES]) -m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([YELP_HELP_RULES])]) -]) - -# =========================================================================== -# http://autoconf-archive.cryp.to/ax_check_enable_debug.html -# =========================================================================== -# -# SYNOPSIS -# -# Check for the presence of an --enable-debug option to configure and -# allow/avoid compiled debugging flags appropriately. -# -# AX_CHECK_ENABLE_DEBUG([enable by default=yes/info/profile/no], -# [ENABLE DEBUG VARIABLES …], -# [DISABLE DEBUG VARIABLES NDEBUG …]) -# -# DESCRIPTION -# -# Check for the presence of an --enable-debug option to configure, with the -# specified default value used when the option is not present. Return the -# value in the variable $ax_enable_debug. -# -# Specifying 'yes' adds '-g -O0' to the compilation flags for all languages. -# Specifying 'info' adds '-g' to the compilation flags. Specifying 'profile' -# adds '-g -pg' to the compilation flags and '-pg' to the linking flags. -# Otherwise, nothing is added. -# -# Define the variables listed in the second argument if debug is enabled, -# defaulting to no variables. Defines the variables listed in the third -# argument if debug is disabled, defaulting to NDEBUG. All lists of -# variables should be space-separated. -# -# If debug is not enabled, ensure AC_PROG_* will not add debugging flags. -# Should be invoked prior to any AC_PROG_* compiler checks. -# -# LAST MODIFICATION -# -# 2014-05-12 -# -# COPYLEFT -# -# Copyright (c) 2011 Rhys Ulerich -# Copyright © 2014 Philip Withnall -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. - -AC_DEFUN([AX_CHECK_ENABLE_DEBUG],[ - AC_BEFORE([$0],[AC_PROG_CC])dnl - AC_BEFORE([$0],[AC_PROG_CXX])dnl - AC_BEFORE([$0],[AC_PROG_F77])dnl - AC_BEFORE([$0],[AC_PROG_FC])dnl - - AC_MSG_CHECKING(whether to enable debugging) - - m4_define(ax_enable_debug_default,[m4_tolower(m4_normalize(ifelse([$1],,[no],[$1])))]) - m4_define(ax_enable_debug_vars,[m4_normalize(ifelse([$2],,,[$2]))]) - m4_define(ax_disable_debug_vars,[m4_normalize(ifelse([$3],,[NDEBUG],[$3]))]) - - AC_ARG_ENABLE(debug, - [AS_HELP_STRING([--enable-debug]@<:@=ax_enable_debug_default@:>@,[compile with debugging; one of yes/info/profile/no])], - [],enable_debug=ax_enable_debug_default) - if test "x$enable_debug" = "xyes" || test "x$enable_debug" = "x"; then - AC_MSG_RESULT(yes) - CFLAGS="${CFLAGS} -g -O0" - CXXFLAGS="${CXXFLAGS} -g -O0" - FFLAGS="${FFLAGS} -g -O0" - FCFLAGS="${FCFLAGS} -g -O0" - OBJCFLAGS="${OBJCFLAGS} -g -O0" - - dnl Define various variables if debugging is enabled. - m4_map_args_w(ax_enable_debug_vars, [AC_DEFINE(], [,,[Define if debugging is enabled])]) - else - if test "x$enable_debug" = "xinfo"; then - AC_MSG_RESULT(info) - CFLAGS="${CFLAGS} -g" - CXXFLAGS="${CXXFLAGS} -g" - FFLAGS="${FFLAGS} -g" - FCFLAGS="${FCFLAGS} -g" - OBJCFLAGS="${OBJCFLAGS} -g" - elif test "x$enable_debug" = "xprofile"; then - AC_MSG_RESULT(profile) - CFLAGS="${CFLAGS} -g -pg" - CXXFLAGS="${CXXFLAGS} -g -pg" - FFLAGS="${FFLAGS} -g -pg" - FCFLAGS="${FCFLAGS} -g -pg" - OBJCFLAGS="${OBJCFLAGS} -g -pg" - LDFLAGS="${LDFLAGS} -pg" - else - AC_MSG_RESULT(no) - dnl Ensure AC_PROG_CC/CXX/F77/FC/OBJC will not enable debug flags - dnl by setting any unset environment flag variables - if test "x${CFLAGS+set}" != "xset"; then - CFLAGS="" - fi - if test "x${CXXFLAGS+set}" != "xset"; then - CXXFLAGS="" - fi - if test "x${FFLAGS+set}" != "xset"; then - FFLAGS="" - fi - if test "x${FCFLAGS+set}" != "xset"; then - FCFLAGS="" - fi - if test "x${OBJCFLAGS+set}" != "xset"; then - OBJCFLAGS="" - fi - fi - - dnl Define various variables if debugging is disabled. - dnl assert.h is a NOP if NDEBUG is defined, so define it by default. - m4_map_args_w(ax_disable_debug_vars, [AC_DEFINE(], [,,[Define if debugging is disabled])]) - fi - ax_enable_debug=$enable_debug -]) - -# gnome-common.m4 -# -# serial 3 -# - -AU_DEFUN([GNOME_DEBUG_CHECK], -[ - AX_CHECK_ENABLE_DEBUG([no],[GNOME_ENABLE_DEBUG]) -], -[[$0: This macro is deprecated. You should use AX_CHECK_ENABLE_DEBUG instead and -replace uses of GNOME_ENABLE_DEBUG with ENABLE_DEBUG. -See: http://www.gnu.org/software/autoconf-archive/ax_check_enable_debug.html#ax_check_enable_debug]]) - -dnl GNOME_MAINTAINER_MODE_DEFINES () -dnl define DISABLE_DEPRECATED -dnl -AU_DEFUN([GNOME_MAINTAINER_MODE_DEFINES], -[ - AC_REQUIRE([AM_MAINTAINER_MODE]) - - DISABLE_DEPRECATED="" - if test $USE_MAINTAINER_MODE = yes; then - DOMAINS="GCONF BONOBO BONOBO_UI GNOME LIBGLADE GNOME_VFS WNCK LIBSOUP" - for DOMAIN in $DOMAINS; do - DISABLE_DEPRECATED="$DISABLE_DEPRECATED -D${DOMAIN}_DISABLE_DEPRECATED -D${DOMAIN}_DISABLE_SINGLE_INCLUDES" - done - fi - - AC_SUBST(DISABLE_DEPRECATED) -], -[[$0: This macro is deprecated. All of the modules it disables deprecations for -are obsolete. Remove it and all uses of DISABLE_DEPRECATED.]]) - -# gnome-compiler-flags.m4 -# -# serial 4 -# - -dnl GNOME_COMPILE_WARNINGS -dnl Turn on many useful compiler warnings and substitute the result into -dnl WARN_CFLAGS -dnl For now, only works on GCC -dnl Pass the default value of the --enable-compile-warnings configure option as -dnl the first argument to the macro, defaulting to 'yes'. -dnl Additional warning/error flags can be passed as an optional second argument. -dnl -dnl For example: GNOME_COMPILE_WARNINGS([maximum],[-Werror=some-flag -Wfoobar]) -AU_DEFUN([GNOME_COMPILE_WARNINGS],[ - dnl ****************************** - dnl More compiler warnings - dnl ****************************** - - AC_ARG_ENABLE(compile-warnings, - AS_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@], - [Turn on compiler warnings]),, - [enable_compile_warnings="m4_default([$1],[yes])"]) - - if test "x$GCC" != xyes; then - enable_compile_warnings=no - fi - - warning_flags= - realsave_CFLAGS="$CFLAGS" - - dnl These are warning flags that aren't marked as fatal. Can be - dnl overridden on a per-project basis with -Wno-foo. - base_warn_flags=" \ - -Wall \ - -Wstrict-prototypes \ - -Wnested-externs \ - " - - dnl These compiler flags typically indicate very broken or suspicious - dnl code. Some of them such as implicit-function-declaration are - dnl just not default because gcc compiles a lot of legacy code. - dnl We choose to make this set into explicit errors. - base_error_flags=" \ - -Werror=missing-prototypes \ - -Werror=implicit-function-declaration \ - -Werror=pointer-arith \ - -Werror=init-self \ - -Werror=format-security \ - -Werror=format=2 \ - -Werror=missing-include-dirs \ - -Werror=return-type \ - " - - dnl Additional warning or error flags provided by the module author to - dnl allow stricter standards to be imposed on a per-module basis. - dnl The author can pass -W or -Werror flags here as they see fit. - additional_flags="m4_default([$2],[])" - - case "$enable_compile_warnings" in - no) - warning_flags="-w" - ;; - minimum) - warning_flags="-Wall" - ;; - yes|maximum|error) - warning_flags="$base_warn_flags $base_error_flags $additional_flags" - ;; - *) - AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings) - ;; - esac - - if test "$enable_compile_warnings" = "error" ; then - warning_flags="$warning_flags -Werror" - fi - - dnl Check whether GCC supports the warning options - for option in $warning_flags; do - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $option" - AC_MSG_CHECKING([whether gcc understands $option]) - AC_TRY_COMPILE([], [], - has_option=yes, - has_option=no,) - CFLAGS="$save_CFLAGS" - AC_MSG_RESULT([$has_option]) - if test $has_option = yes; then - tested_warning_flags="$tested_warning_flags $option" - fi - unset has_option - unset save_CFLAGS - done - unset option - CFLAGS="$realsave_CFLAGS" - AC_MSG_CHECKING(what warning flags to pass to the C compiler) - AC_MSG_RESULT($tested_warning_flags) - - AC_ARG_ENABLE(iso-c, - AS_HELP_STRING([--enable-iso-c], - [Try to warn if code is not ISO C ]),, - [enable_iso_c=no]) - - AC_MSG_CHECKING(what language compliance flags to pass to the C compiler) - complCFLAGS= - if test "x$enable_iso_c" != "xno"; then - if test "x$GCC" = "xyes"; then - case " $CFLAGS " in - *[\ \ ]-ansi[\ \ ]*) ;; - *) complCFLAGS="$complCFLAGS -ansi" ;; - esac - case " $CFLAGS " in - *[\ \ ]-pedantic[\ \ ]*) ;; - *) complCFLAGS="$complCFLAGS -pedantic" ;; - esac - fi - fi - AC_MSG_RESULT($complCFLAGS) - - WARN_CFLAGS="$tested_warning_flags $complCFLAGS" - AC_SUBST(WARN_CFLAGS) -], -[[$0: This macro is deprecated. You should use AX_COMPILER_FLAGS instead and -eliminate use of --enable-iso-c. -See: http://www.gnu.org/software/autoconf-archive/ax_compiler_flags.html#ax_compiler_flags]]) - -dnl For C++, do basically the same thing. - -AU_DEFUN([GNOME_CXX_WARNINGS],[ - AC_ARG_ENABLE(cxx-warnings, - AS_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@] - [Turn on compiler warnings.]),, - [enable_cxx_warnings="m4_default([$1],[minimum])"]) - - AC_MSG_CHECKING(what warning flags to pass to the C++ compiler) - warnCXXFLAGS= - if test "x$GXX" != xyes; then - enable_cxx_warnings=no - fi - if test "x$enable_cxx_warnings" != "xno"; then - if test "x$GXX" = "xyes"; then - case " $CXXFLAGS " in - *[\ \ ]-Wall[\ \ ]*) ;; - *) warnCXXFLAGS="-Wall -Wno-unused" ;; - esac - - ## -W is not all that useful. And it cannot be controlled - ## with individual -Wno-xxx flags, unlike -Wall - if test "x$enable_cxx_warnings" = "xyes"; then - warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual" - fi - fi - fi - AC_MSG_RESULT($warnCXXFLAGS) - - AC_ARG_ENABLE(iso-cxx, - AS_HELP_STRING([--enable-iso-cxx], - [Try to warn if code is not ISO C++ ]),, - [enable_iso_cxx=no]) - - AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler) - complCXXFLAGS= - if test "x$enable_iso_cxx" != "xno"; then - if test "x$GXX" = "xyes"; then - case " $CXXFLAGS " in - *[\ \ ]-ansi[\ \ ]*) ;; - *) complCXXFLAGS="$complCXXFLAGS -ansi" ;; - esac - - case " $CXXFLAGS " in - *[\ \ ]-pedantic[\ \ ]*) ;; - *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;; - esac - fi - fi - AC_MSG_RESULT($complCXXFLAGS) - - WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS" - AC_SUBST(WARN_CXXFLAGS) -], -[[$0: This macro is deprecated. You should use AX_COMPILER_FLAGS instead and -eliminate use of --enable-iso-cxx. -See: http://www.gnu.org/software/autoconf-archive/ax_compiler_flags.html#ax_compiler_flags]]) - -dnl GLIB_GSETTINGS -dnl Defines GSETTINGS_SCHEMAS_INSTALL which controls whether -dnl the schema should be compiled -dnl - -AC_DEFUN([GLIB_GSETTINGS], -[ - m4_pattern_allow([AM_V_GEN]) - AC_ARG_ENABLE(schemas-compile, - AS_HELP_STRING([--disable-schemas-compile], - [Disable regeneration of gschemas.compiled on install]), - [case ${enableval} in - yes) GSETTINGS_DISABLE_SCHEMAS_COMPILE="" ;; - no) GSETTINGS_DISABLE_SCHEMAS_COMPILE="1" ;; - *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-compile]) ;; - esac]) - AC_SUBST([GSETTINGS_DISABLE_SCHEMAS_COMPILE]) - PKG_PROG_PKG_CONFIG([0.16]) - AC_SUBST(gsettingsschemadir, [${datadir}/glib-2.0/schemas]) - if test x$cross_compiling != xyes; then - GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0` - else - AC_PATH_PROG(GLIB_COMPILE_SCHEMAS, glib-compile-schemas) - fi - AC_SUBST(GLIB_COMPILE_SCHEMAS) - if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then - ifelse([$2],,[AC_MSG_ERROR([glib-compile-schemas not found.])],[$2]) - else - ifelse([$1],,[:],[$1]) - fi - - GSETTINGS_RULES=' -.PHONY : uninstall-gsettings-schemas install-gsettings-schemas clean-gsettings-schemas - -mostlyclean-am: clean-gsettings-schemas - -gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE)) - -%.gschema.valid: %.gschema.xml $(gsettings__enum_file) - $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p [$](@D) && touch [$]@ - -all-am: $(gsettings_SCHEMAS:.xml=.valid) -uninstall-am: uninstall-gsettings-schemas -install-data-am: install-gsettings-schemas - -.SECONDARY: $(gsettings_SCHEMAS) - -install-gsettings-schemas: $(gsettings_SCHEMAS) $(gsettings__enum_file) - @$(NORMAL_INSTALL) - if test -n "$^"; then \ - test -z "$(gsettingsschemadir)" || $(MKDIR_P) "$(DESTDIR)$(gsettingsschemadir)"; \ - $(INSTALL_DATA) $^ "$(DESTDIR)$(gsettingsschemadir)"; \ - test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir); \ - fi - -uninstall-gsettings-schemas: - @$(NORMAL_UNINSTALL) - @list='\''$(gsettings_SCHEMAS) $(gsettings__enum_file)'\''; test -n "$(gsettingsschemadir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '\''$(DESTDIR)$(gsettingsschemadir)'\'' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(gsettingsschemadir)" && rm -f $$files - test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir) - -clean-gsettings-schemas: - rm -f $(gsettings_SCHEMAS:.xml=.valid) $(gsettings__enum_file) - -ifdef gsettings_ENUM_NAMESPACE -$(gsettings__enum_file): $(gsettings_ENUM_FILES) - $(AM_V_GEN) glib-mkenums --comments '\'''\'' --fhead "" --vhead " <@type@ id='\''$(gsettings_ENUM_NAMESPACE).@EnumName@'\''>" --vprod " " --vtail " " --ftail "" [$]^ > [$]@.tmp && mv [$]@.tmp [$]@ -endif -' - _GSETTINGS_SUBST(GSETTINGS_RULES) -]) - -dnl _GSETTINGS_SUBST(VARIABLE) -dnl Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST -AC_DEFUN([_GSETTINGS_SUBST], -[ -AC_SUBST([$1]) -m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) -] -) - -dnl -*- mode: autoconf -*- -dnl Copyright 2009 Johan Dahlin -dnl -dnl This file is free software; the author(s) gives unlimited -dnl permission to copy and/or distribute it, with or without -dnl modifications, as long as this notice is preserved. -dnl - -# serial 1 - -m4_define([_GOBJECT_INTROSPECTION_CHECK_INTERNAL], -[ - AC_BEFORE([AC_PROG_LIBTOOL],[$0])dnl setup libtool first - AC_BEFORE([AM_PROG_LIBTOOL],[$0])dnl setup libtool first - AC_BEFORE([LT_INIT],[$0])dnl setup libtool first - - dnl enable/disable introspection - m4_if([$2], [require], - [dnl - enable_introspection=yes - ],[dnl - AC_ARG_ENABLE(introspection, - AS_HELP_STRING([--enable-introspection[=@<:@no/auto/yes@:>@]], - [Enable introspection for this build]),, - [enable_introspection=auto]) - ])dnl - - AC_MSG_CHECKING([for gobject-introspection]) - - dnl presence/version checking - AS_CASE([$enable_introspection], - [no], [dnl - found_introspection="no (disabled, use --enable-introspection to enable)" - ],dnl - [yes],[dnl - PKG_CHECK_EXISTS([gobject-introspection-1.0],, - AC_MSG_ERROR([gobject-introspection-1.0 is not installed])) - PKG_CHECK_EXISTS([gobject-introspection-1.0 >= $1], - found_introspection=yes, - AC_MSG_ERROR([You need to have gobject-introspection >= $1 installed to build AC_PACKAGE_NAME])) - ],dnl - [auto],[dnl - PKG_CHECK_EXISTS([gobject-introspection-1.0 >= $1], found_introspection=yes, found_introspection=no) - dnl Canonicalize enable_introspection - enable_introspection=$found_introspection - ],dnl - [dnl - AC_MSG_ERROR([invalid argument passed to --enable-introspection, should be one of @<:@no/auto/yes@:>@]) - ])dnl - - AC_MSG_RESULT([$found_introspection]) - - INTROSPECTION_SCANNER= - INTROSPECTION_COMPILER= - INTROSPECTION_GENERATE= - INTROSPECTION_GIRDIR= - INTROSPECTION_TYPELIBDIR= - if test "x$found_introspection" = "xyes"; then - INTROSPECTION_SCANNER=`$PKG_CONFIG --variable=g_ir_scanner gobject-introspection-1.0` - INTROSPECTION_COMPILER=`$PKG_CONFIG --variable=g_ir_compiler gobject-introspection-1.0` - INTROSPECTION_GENERATE=`$PKG_CONFIG --variable=g_ir_generate gobject-introspection-1.0` - INTROSPECTION_GIRDIR=`$PKG_CONFIG --variable=girdir gobject-introspection-1.0` - INTROSPECTION_TYPELIBDIR="$($PKG_CONFIG --variable=typelibdir gobject-introspection-1.0)" - INTROSPECTION_CFLAGS=`$PKG_CONFIG --cflags gobject-introspection-1.0` - INTROSPECTION_LIBS=`$PKG_CONFIG --libs gobject-introspection-1.0` - INTROSPECTION_MAKEFILE=`$PKG_CONFIG --variable=datadir gobject-introspection-1.0`/gobject-introspection-1.0/Makefile.introspection - fi - AC_SUBST(INTROSPECTION_SCANNER) - AC_SUBST(INTROSPECTION_COMPILER) - AC_SUBST(INTROSPECTION_GENERATE) - AC_SUBST(INTROSPECTION_GIRDIR) - AC_SUBST(INTROSPECTION_TYPELIBDIR) - AC_SUBST(INTROSPECTION_CFLAGS) - AC_SUBST(INTROSPECTION_LIBS) - AC_SUBST(INTROSPECTION_MAKEFILE) - - AM_CONDITIONAL(HAVE_INTROSPECTION, test "x$found_introspection" = "xyes") -]) - - -dnl Usage: -dnl GOBJECT_INTROSPECTION_CHECK([minimum-g-i-version]) - -AC_DEFUN([GOBJECT_INTROSPECTION_CHECK], -[ - _GOBJECT_INTROSPECTION_CHECK_INTERNAL([$1]) -]) - -dnl Usage: -dnl GOBJECT_INTROSPECTION_REQUIRE([minimum-g-i-version]) - - -AC_DEFUN([GOBJECT_INTROSPECTION_REQUIRE], -[ - _GOBJECT_INTROSPECTION_CHECK_INTERNAL([$1], [require]) -]) - -# Copyright (C) 2002-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.15' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.15.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.15.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to -# '$srcdir', '$srcdir/..', or '$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is '.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ([2.52])dnl - m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], - [$1], [CXX], [depcc="$CXX" am_compiler_list=], - [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], - [$1], [UPC], [depcc="$UPC" am_compiler_list=], - [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES. -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE([dependency-tracking], [dnl -AS_HELP_STRING( - [--enable-dependency-tracking], - [do not reject slow dependency extractors]) -AS_HELP_STRING( - [--disable-dependency-tracking], - [speeds up one-time build])]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each '.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. -m4_define([AC_PROG_CC], -m4_defn([AC_PROG_CC]) -[_AM_PROG_CC_C_O -]) - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.65])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[AC_DIAGNOSE([obsolete], - [$0: two- and three-arguments forms are deprecated.]) -m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if( - m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), - [ok:ok],, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -AM_MISSING_PROG([AUTOCONF], [autoconf]) -AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -AM_MISSING_PROG([AUTOHEADER], [autoheader]) -AM_MISSING_PROG([MAKEINFO], [makeinfo]) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target (and possibly the TAP driver). The -# system "awk" is bad on some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -AC_REQUIRE([AM_SILENT_RULES])dnl -dnl The testsuite driver may need to know about EXEEXT, so add the -dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This -dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi -dnl The trailing newline in this macro's definition is deliberate, for -dnl backward compatibility and to allow trailing 'dnl'-style comments -dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. -]) - -dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST([install_sh])]) - -# Copyright (C) 2003-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- -# From Jim Meyering - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAINTAINER_MODE([DEFAULT-MODE]) -# ---------------------------------- -# Control maintainer-specific portions of Makefiles. -# Default is to disable them, unless 'enable' is passed literally. -# For symmetry, 'disable' may be passed as well. Anyway, the user -# can override the default with the --enable/--disable switch. -AC_DEFUN([AM_MAINTAINER_MODE], -[m4_case(m4_default([$1], [disable]), - [enable], [m4_define([am_maintainer_other], [disable])], - [disable], [m4_define([am_maintainer_other], [enable])], - [m4_define([am_maintainer_other], [enable]) - m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) -AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode's default is 'disable' unless 'enable' is passed - AC_ARG_ENABLE([maintainer-mode], - [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], - am_maintainer_other[ make rules and dependencies not useful - (and sometimes confusing) to the casual installer])], - [USE_MAINTAINER_MODE=$enableval], - [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST([MAINT])dnl -] -) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it is modern enough. -# If it is, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - AC_MSG_WARN(['missing' script is too old or missing]) -fi -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# -------------------- -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) - -# _AM_SET_OPTIONS(OPTIONS) -# ------------------------ -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_CC_C_O -# --------------- -# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC -# to automatically call this. -AC_DEFUN([_AM_PROG_CC_C_O], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -AC_LANG_PUSH([C])dnl -AC_CACHE_CHECK( - [whether $CC understands -c and -o together], - [am_cv_prog_cc_c_o], - [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i]) -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -AC_LANG_POP([C])]) - -# For backward compatibility. -AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_RUN_LOG(COMMAND) -# ------------------- -# Run COMMAND, save the exit status in ac_status, and log it. -# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) -AC_DEFUN([AM_RUN_LOG], -[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD - ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - (exit $ac_status); }]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT([yes]) -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi -AC_CONFIG_COMMANDS_PRE( - [AC_MSG_CHECKING([that generated files are newer than configure]) - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - AC_MSG_RESULT([done])]) -rm -f conftest.file -]) - -# Copyright (C) 2009-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl -AS_HELP_STRING( - [--enable-silent-rules], - [less verbose build output (undo: "make V=1")]) -AS_HELP_STRING( - [--disable-silent-rules], - [verbose build output (undo: "make V=0")])dnl -]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -dnl -dnl A few 'make' implementations (e.g., NonStop OS and NextStep) -dnl do not support nested variable expansions. -dnl See automake bug#9928 and bug#10237. -am_make=${MAKE-make} -AC_CACHE_CHECK([whether $am_make supports nested variables], - [am_cv_make_support_nested_variables], - [if AS_ECHO([['TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor 'install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in "make install-strip", and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# -------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of 'v7', 'ustar', or 'pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -# -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AC_SUBST([AMTAR], ['$${TAR-tar}']) - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' - -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - - [m4_case([$1], - [ustar], - [# The POSIX 1988 'ustar' format is defined with fixed-size fields. - # There is notably a 21 bits limit for the UID and the GID. In fact, - # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 - # and bug#13588). - am_max_uid=2097151 # 2^21 - 1 - am_max_gid=$am_max_uid - # The $UID and $GID variables are not portable, so we need to resort - # to the POSIX-mandated id(1) utility. Errors in the 'id' calls - # below are definitely unexpected, so allow the users to see them - # (that is, avoid stderr redirection). - am_uid=`id -u || echo unknown` - am_gid=`id -g || echo unknown` - AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi - AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi], - - [pax], - [], - - [m4_fatal([Unknown tar format])]) - - AC_MSG_CHECKING([how to create a $1 tar archive]) - - # Go ahead even if we have the value already cached. We do so because we - # need to set the values for the 'am__tar' and 'am__untar' variables. - _am_tools=${am_cv_prog_tar_$1-$_am_tools} - - for _am_tool in $_am_tools; do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works. - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi - done - rm -rf conftest.dir - - AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) - AC_MSG_RESULT([$am_cv_prog_tar_$1])]) - -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([m4/behave-installed-tests.m4]) -m4_include([m4/gettext.m4]) -m4_include([m4/gtk-doc.m4]) -m4_include([m4/iconv.m4]) -m4_include([m4/intlmacosx.m4]) -m4_include([m4/lib-ld.m4]) -m4_include([m4/lib-link.m4]) -m4_include([m4/lib-prefix.m4]) -m4_include([m4/libtool.m4]) -m4_include([m4/ltoptions.m4]) -m4_include([m4/ltsugar.m4]) -m4_include([m4/ltversion.m4]) -m4_include([m4/lt~obsolete.m4]) -m4_include([m4/nls.m4]) -m4_include([m4/po.m4]) -m4_include([m4/progtest.m4]) diff -Nru eog-3.26.2/ChangeLog eog-3.27.90/ChangeLog --- eog-3.26.2/ChangeLog 2017-11-08 20:55:37.000000000 +0000 +++ eog-3.27.90/ChangeLog 2018-02-12 20:46:58.000000000 +0000 @@ -1,27660 +1,47 @@ -# Generated by Makefile. Do not edit. +=== ChangeLog discontinued === -commit 0a3ef396f46d6eae2e49169a23cad227a4e11042 -Author: Felix Riemann -Date: Wed Nov 8 21:55:10 2017 +0100 + With the move to git, this module is switching from a ChangeLog file to + relying on commit messages to provide change history. Please write commit + messages in the format described at http://live.gnome.org/Git/CommitMessages - Prepare release 3.26.2 + Below is a copy of this format: - NEWS | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) +=== begin example commit === +[tag] Short explanation of the commit -commit ea2902379488b3833ba4bea6339d2a842a795e65 -Author: Kjartan Maraas -Date: Mon Nov 6 15:05:35 2017 +0100 +Longer explanation explaining exactly what's changed, whether any +external or private interfaces changed, what bugs were fixed (with bug +tracker reference if applicable) and so forth. Be concise but not too brief. +=== end example commit === - Updated Norwegian bokmål translation. + - The commit message is mainly for the other people, so they should be able + to understand it now and six months later. - po/nb.po | 718 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 361 insertions(+), 357 deletions(-) + - Always add a brief description of the commit to the _first_ line of the + commit and terminate by two newlines (it will work without the second + newline, but that is not nice for the interfaces). -commit be748d1a85ebc2d3392ef03aa7bbee1da6cab032 -Author: Piotr Drąg -Date: Thu Oct 26 02:51:27 2017 +0200 + - First line (the brief description) must only be one sentence and should + start with a capital letter unless it starts with a lowercase symbol or + identifier. Don't use a trailing period either. Don't exceed 72 characters. - Add Polish help translation + - You can prefix the first line with one tag, to make it easier to know to + which part of the module the commit applies. For example, a commit with + "[fish] Make it work with newer fortune" in the gnome-panel module clearly + applies to the fish applet. - help/Makefile.am | 2 +- - help/pl/figures/image-view-prefs.png | Bin 0 -> 18765 bytes - help/pl/figures/multiple-convert.png | Bin 0 -> 24653 bytes - help/pl/figures/multiple-rename-count.png | Bin 0 -> 24653 bytes - help/pl/figures/plugin-send-by-mail.png | Bin 0 -> 215420 bytes - help/pl/figures/plugins-all.png | Bin 0 -> 76205 bytes - help/pl/figures/prefs-plugins-date.png | Bin 0 -> 23326 bytes - help/pl/figures/prefs-plugins-fullscreen.png | Bin 0 -> 23365 bytes - help/pl/figures/prefs-plugins.png | Bin 0 -> 22463 bytes - help/pl/figures/slideshow-prefs.png | Bin 0 -> 15471 bytes - help/pl/pl.po | 3023 ++++++++++++++++++++++++++ - 11 files changed, 3024 insertions(+), 1 deletion(-) + - The main description (the body) is normal prose and should use normal + punctuation and capital letters where appropriate. Normally, for patches + sent to a mailing list it's copied from there. This main description can be + empty if the change is self-explanatory (eg: "Add DOAP file"). -commit 9c31fc2e59c68f5bb6105eff8fc9809b34aa17af -Author: Mingcong Bai -Date: Sat Oct 21 20:27:09 2017 +0800 + - When committing code on behalf of others use the --author option, e.g. git + commit -a --author "Joe Coder ". - Update zh_CN translation + - When referring to a bug, you can use this form: bgo#12345. Use bgo for + bugzilla.gnome.org, but you can also reference bugs in other bug trackers: + rh means bugzilla.redhat.com, bnc means bugzilla.novell.com, lp means + launchpad.net, etc. - po/zh_CN.po | 847 ++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 430 insertions(+), 417 deletions(-) - -commit 8ac2e6bf805c5accf88495f14fa903cbb904dc86 -Author: Andre Klapper -Date: Mon Oct 9 17:40:00 2017 +0200 - - help: lv: Fix broken markup - - help/lv/lv.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 138f23209877d101494cc5965f872f54cdcc81de -Author: Daniel Mustieles -Date: Mon Oct 9 14:13:13 2017 +0000 - - Update Spanish translation - - help/es/es.po | 207 ++++------------------------------------------------------ - 1 file changed, 11 insertions(+), 196 deletions(-) - -commit 382503eff951270eaa833245b7ac4bf551e52d79 -Author: Ryan Schmidt -Date: Mon Oct 9 02:29:16 2017 -0500 - - Fix gui tags in Spanish help translation - - Some tags weren’t updated properly when the translation was changed in - 821899157419ee7358efc70cd10200f7d60f5f61. - - https://bugzilla.gnome.org/show_bug.cgi?id=788582 - - help/es/es.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit 670d7c5b8812fff94c1309667f8563468d81dfd6 -Author: Piotr Drąg -Date: Mon Oct 9 15:58:12 2017 +0200 - - Fix line endings in Spanish help translation - - Makes the file consistently use UNIX line endings. - - https://bugzilla.gnome.org/show_bug.cgi?id=788582 - - help/es/es.po | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 563db75bab89a8c38b25e2f240ff0377f06da010 -Author: Xavi Ivars -Date: Thu Oct 5 13:34:34 2017 +0200 - - [l10n] Updated Catalan (Valencian) translation - - po/ca@valencia.po | 1742 +++++++++++++++++++++++++++++------------------------ - 1 file changed, 941 insertions(+), 801 deletions(-) - -commit 7464e4b8a3ff797ebfee43a879f8eb8198e91bfb -Author: Felix Riemann -Date: Mon Oct 2 22:40:24 2017 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8b32d76311453ba9dabe853a3be83e03ba21a6a3 -Author: Felix Riemann -Date: Mon Oct 2 22:29:51 2017 +0200 - - Prepare release 3.26.1 - - NEWS | 22 ++++++++++++++++++++++ - 1 file changed, 22 insertions(+) - -commit 4fe287a041e660036db24d43d0b8fd54e284add1 -Author: Sveinn í Felli -Date: Mon Oct 2 10:09:43 2017 +0000 - - Update Icelandic translation - - po/is.po | 792 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 371 insertions(+), 421 deletions(-) - -commit bde6213ee663cbc6d4e7dfd18e908b03f776c1d3 -Author: Anders Jonsson -Date: Sun Oct 1 21:31:36 2017 +0000 - - Update Swedish translation - - help/sv/sv.po | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - -commit 74c9cf3080b0f39000b5753afa71bba93c9514a3 -Author: Piotr Drąg -Date: Sat Sep 30 15:06:25 2017 +0200 - - data: Add missing gettext-domain to gschema - - data/org.gnome.eog.gschema.xml.in | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit f63032f60b3f767889737c9994694f6cc468c014 -Author: Arash Mousavi -Date: Sat Sep 30 01:03:11 2017 +0330 - - [L10N] Update Persian translation - - po/fa.po | 834 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 421 insertions(+), 413 deletions(-) - -commit ff4189a51e43081c79e26f5a7b8123180b576b80 -Author: Efstathios Iosifidis -Date: Mon Sep 25 14:05:33 2017 +0000 - - Update Greek translation - - po/el.po | 989 +++++++++++++++++++++++---------------------------------------- - 1 file changed, 363 insertions(+), 626 deletions(-) - -commit 652505520d362ad38b94ff961c106657c1326465 -Author: Andre Klapper -Date: Mon Sep 25 00:42:32 2017 +0200 - - Fix typo in German user docs translation - - help/de/de.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit cd9f65d4d0f727210190ccf442c5d5e6cfd669f2 -Author: Andre Klapper -Date: Sun Sep 24 23:33:57 2017 +0200 - - cs: Fix broken markup in user docs - - help/cs/cs.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 6a17972c7921b1fd30ab3e0771dab1371aaad405 -Author: Stas Solovey -Date: Mon Sep 18 16:24:13 2017 +0000 - - Update Russian translation - - po/ru.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit d972f9526d951adb16a0048a7e1c1b21dcf51edc -Author: Stas Solovey -Date: Mon Sep 18 16:20:26 2017 +0000 - - Update Russian translation - - po/ru.po | 722 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 363 insertions(+), 359 deletions(-) - -commit 96f5ceb07eb5635202dcdfd9bdc847140add96c3 -Author: Yuras Shumovich -Date: Sun Sep 17 19:50:23 2017 +0000 - - Update Belarusian translation - - po/be.po | 1729 ++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 937 insertions(+), 792 deletions(-) - -commit a71af1727295d43f6d61fb5457ddda56cc136f6f -Author: hanniedu -Date: Wed Sep 13 11:59:29 2017 +0200 - - Updated Dutch translation Master 3.26 - - po/nl.po | 37 +++++++++++++++++-------------------- - 1 file changed, 17 insertions(+), 20 deletions(-) - -commit d30169b5548b548035e05b220e2844b87dc7b8cf -Author: Felix Riemann -Date: Mon Sep 11 22:31:27 2017 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 25d5fbd0aed7e7d5f6928a27bf84c0242d0b8129 -Author: Felix Riemann -Date: Mon Sep 11 22:25:57 2017 +0200 - - Prepare release 3.26.0 - - NEWS | 16 ++++++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 18 insertions(+), 2 deletions(-) - -commit 6f9f610bb34f6721f40913979f7fe0e31c7946e1 -Author: Jiro Matsuzawa -Date: Mon Sep 11 15:03:07 2017 +0000 - - Update Japanese translation - - po/ja.po | 334 ++++++--------------------------------------------------------- - 1 file changed, 32 insertions(+), 302 deletions(-) - -commit 0e30ec031233c5eaaac26892fa77891cc33d94f5 -Author: Sebastian Rasmussen -Date: Mon Sep 11 12:10:07 2017 +0000 - - Update Swedish translation - - help/sv/sv.po | 1048 ++++++++++++++++++++++++--------------------------------- - 1 file changed, 444 insertions(+), 604 deletions(-) - -commit dfc0f7432cf5365cb0e010df6759ec736a38239e -Author: hanniedu -Date: Mon Sep 11 12:42:11 2017 +0200 - - Updated Dutch translation Master 3.26 - - po/nl.po | 838 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 425 insertions(+), 413 deletions(-) - -commit c947ae6a36a7159278a3ab3bb5c3d2a91b84b1ae -Author: Ask Hjorth Larsen -Date: Sun Sep 10 18:03:33 2017 +0200 - - Updated Danish translation - - po/da.po | 42 ++++++++++++++++++------------------------ - 1 file changed, 18 insertions(+), 24 deletions(-) - -commit 112b2ee456de5c604faac21882163c94fafac14a -Author: Alexander Shopov -Date: Sun Sep 10 12:16:09 2017 +0300 - - Updated Bulgarian translation - - po/bg.po | 1307 ++++++++++++++++++++++++++++++++++++++++++++++++++++---------- - 1 file changed, 1100 insertions(+), 207 deletions(-) - -commit 70d7434010e1e5ce7c35ab74bae92f693634b299 -Author: Jordi Mas -Date: Sun Sep 10 09:34:39 2017 +0200 - - Fixes to Catalan translation - - help/ca/ca.po | 2616 ++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 1569 insertions(+), 1047 deletions(-) - -commit f7198d4f7234ff972c1af8608821f771d8653a1c -Author: Inaki Larranaga Murgoitio -Date: Sat Sep 9 14:29:30 2017 +0200 - - Update Basque language - - po/eu.po | 716 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 360 insertions(+), 356 deletions(-) - -commit 0b0fc1fadc27ab09724470437c337f28d991f078 -Author: Lyubomir Vasilev -Date: Sat Sep 9 09:55:45 2017 +0300 - - Updated Bulgarian translation - - po/bg.po | 1176 ++++++++------------------------------------------------------ - 1 file changed, 148 insertions(+), 1028 deletions(-) - -commit c6c680a679e026f7e2b8e923316d601b6bd4c663 -Author: Gábor Kelemen -Date: Fri Sep 8 19:19:45 2017 +0000 - - Update Hungarian translation - - help/hu/hu.po | 1531 ++++++++++++++++++++++++--------------------------------- - 1 file changed, 637 insertions(+), 894 deletions(-) - -commit fb5db90a81e9dd6b55e397b7a6a79c679671b1e1 -Author: sujiniku -Date: Wed Sep 6 15:04:19 2017 +0000 - - Update Japanese translation - - po/ja.po | 900 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 494 insertions(+), 406 deletions(-) - -commit 19c3ea82de95348a5f2d6198c499eb1313fab989 -Author: Gianvito Cavasoli -Date: Tue Sep 5 09:13:05 2017 +0000 - - Update Italian translation - - po/it.po | 776 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 362 insertions(+), 414 deletions(-) - -commit 8f5850e04cf0e33897745691e0d672c7cfbf6ff3 -Author: Felix Riemann -Date: Mon Sep 4 22:47:15 2017 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0d554c7d0db6e423ff95fcbb72f0c57f93a4d1e8 -Author: Felix Riemann -Date: Mon Sep 4 22:16:58 2017 +0200 - - Prepare release 3.25.92 - - NEWS | 34 ++++++++++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 35 insertions(+), 1 deletion(-) - -commit bc2c8ce2c17d5c1cfe3a26c6a872080759bee61f -Author: Rafael Fontenelle -Date: Sun Sep 3 15:09:13 2017 +0000 - - Update Brazilian Portuguese translation - - po/pt_BR.po | 718 ++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 362 insertions(+), 356 deletions(-) - -commit 420803d584ec8be95d685d1e62576bae8cc44223 -Author: Jeeyong Um -Date: Sat Sep 2 12:58:02 2017 +0000 - - Update Korean translation - - po/ko.po | 723 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 365 insertions(+), 358 deletions(-) - -commit b495b4be36e7771f32785086885b4844eb734a90 -Author: Rūdolfs Mazurs -Date: Sun Aug 27 22:21:12 2017 +0300 - - Update Latvian translation - - help/lv/lv.po | 316 +++++++++++++++++++++++++--------------------------------- - 1 file changed, 138 insertions(+), 178 deletions(-) - -commit 75ae42691136d69fe0c0e426450ae81db4f005fd -Author: Rūdolfs Mazurs -Date: Sun Aug 27 22:20:38 2017 +0300 - - Update Latvian translation - - help/lv/figures/image-view-prefs.png | Bin 0 -> 25873 bytes - help/lv/figures/multiple-convert.png | Bin 0 -> 31936 bytes - help/lv/figures/multiple-rename-count.png | Bin 0 -> 31936 bytes - help/lv/figures/plugin-send-by-mail.png | Bin 0 -> 36093 bytes - help/lv/figures/plugins-all.png | Bin 0 -> 84293 bytes - help/lv/figures/prefs-plugins-date.png | Bin 0 -> 24745 bytes - help/lv/figures/prefs-plugins-fullscreen.png | Bin 0 -> 24809 bytes - help/lv/figures/prefs-plugins.png | Bin 0 -> 24745 bytes - help/lv/figures/slideshow-prefs.png | Bin 0 -> 19602 bytes - help/lv/lv.po | 1035 ++++++++++++++++---------- - po/lv.po | 776 +++++++++---------- - 11 files changed, 987 insertions(+), 824 deletions(-) - -commit e5d34f8443f222f8d01096c160eb81eab07aac74 -Author: Cheng-Chia Tseng -Date: Sun Aug 27 13:40:49 2017 +0000 - - Update Chinese (Taiwan) translation - - po/zh_TW.po | 759 ++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 375 insertions(+), 384 deletions(-) - -commit 75d34db51f5aa06fbd464e8b10cd3242320fe1a8 -Author: Ask Hjorth Larsen -Date: Sat Aug 26 16:31:52 2017 +0200 - - Updated Danish translation - - po/da.po | 775 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 392 insertions(+), 383 deletions(-) - -commit b9b1974b02ffd23b70944cab6544867ebd8c7b95 -Author: gogo -Date: Wed Aug 23 15:42:55 2017 +0000 - - Update Croatian translation - - po/hr.po | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -commit c2adba2df5e2e4c5dda19f7f5dcf689f2ff1ecd7 -Author: Sveinn í Felli -Date: Wed Aug 23 10:29:38 2017 +0000 - - Update Icelandic translation - - (cherry picked from commit 586031894977ff242e6daeb15f1a8f449b46cac4) - - po/is.po | 325 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 180 insertions(+), 145 deletions(-) - -commit 209323add1889554cc09f21fda016d5ff899715e -Author: Aurimas Černius -Date: Tue Aug 22 23:30:54 2017 +0300 - - Updated Lithuanian translation - - po/lt.po | 722 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 364 insertions(+), 358 deletions(-) - -commit f59f3ec91f16bd69222fc75432a9cf6986770c0c -Author: Daniel Mustieles -Date: Tue Aug 22 07:13:08 2017 +0000 - - Update Spanish translation - - help/es/es.po | 72 +++++++++++++++++++++++++++++------------------------------ - 1 file changed, 36 insertions(+), 36 deletions(-) - -commit e5587fc202dbe85f294db4828e056df39cf3fbab -Author: Jordi Mas -Date: Mon Aug 21 09:02:53 2017 +0200 - - Update Catalan translation - - po/ca.po | 715 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 360 insertions(+), 355 deletions(-) - -commit 3d65cefe47ead9df9a0251e23b42a2adaacbb205 -Author: Christian Kirbach -Date: Sun Aug 20 12:06:07 2017 +0000 - - Update German translation - - help/de/de.po | 71 ++++++++++++----------------------------------------------- - 1 file changed, 14 insertions(+), 57 deletions(-) - -commit 60acfc28a12cf33fd941be91bbd2bb3eb68419c8 -Author: Christian Kirbach -Date: Sun Aug 20 14:04:12 2017 +0200 - - Updated German screen-shots - - help/de/figures/image-view-prefs.png | Bin 35103 -> 33943 bytes - help/de/figures/multiple-convert.png | Bin 27059 -> 36247 bytes - help/de/figures/multiple-rename-count.png | Bin 27167 -> 36247 bytes - help/de/figures/plugin-send-by-mail.png | Bin 60832 -> 267579 bytes - help/de/figures/plugins-all.png | Bin 63999 -> 45808 bytes - help/de/figures/prefs-plugins-date.png | Bin 29366 -> 26699 bytes - help/de/figures/prefs-plugins-fullscreen.png | Bin 29281 -> 26699 bytes - help/de/figures/prefs-plugins.png | Bin 29235 -> 26699 bytes - help/de/figures/slideshow-prefs.png | Bin 23762 -> 21672 bytes - 9 files changed, 0 insertions(+), 0 deletions(-) - -commit 23fd9a66198cbbd314333a4242aad8a39c94dd59 -Author: Alexandre Franke -Date: Sat Aug 19 15:34:19 2017 +0000 - - Update French translation - - po/fr.po | 714 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 359 insertions(+), 355 deletions(-) - -commit 33c75ee063601cb1ef6a3709ecff4d59bc53e670 -Author: gogo -Date: Fri Aug 18 20:52:33 2017 +0000 - - Update Croatian translation - - po/hr.po | 714 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 359 insertions(+), 355 deletions(-) - -commit 112286be8b98e16021b607de5fb87049591e7544 -Author: Jiri Grönroos -Date: Tue Aug 15 17:50:26 2017 +0000 - - Update Finnish translation - - po/fi.po | 722 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 364 insertions(+), 358 deletions(-) - -commit 8c04d38bc28b64dc38b564362f1ff11e1acdc59c -Author: Мирослав Николић -Date: Mon Aug 14 20:04:49 2017 +0200 - - Updated Serbian translation - - po/sr.po | 723 +++++++++++++++++++++++++++++---------------------------- - po/sr@latin.po | 723 +++++++++++++++++++++++++++++---------------------------- - 2 files changed, 732 insertions(+), 714 deletions(-) - -commit 821899157419ee7358efc70cd10200f7d60f5f61 -Author: Daniel Mustieles -Date: Fri Aug 11 11:58:37 2017 +0000 - - Update Spanish translation - - help/es/es.po | 1053 ++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 596 insertions(+), 457 deletions(-) - -commit 95bd6b904393251c5a2a12dc829cc8f0887b8b73 -Author: Marek Cernocky -Date: Fri Aug 11 10:59:38 2017 +0200 - - Updated Czech translation - - help/cs/cs.po | 153 +++++++++++++++++++++++++++++----------------------------- - 1 file changed, 76 insertions(+), 77 deletions(-) - -commit 804f605874129187f9700f8bf7c687aa4be2aca5 -Author: Piotr Drąg -Date: Fri Aug 11 01:31:43 2017 +0200 - - Update Polish translation - - po/pl.po | 737 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 371 insertions(+), 366 deletions(-) - -commit c4d7ad90e8d6f9bc0235e177c89324e6da021104 -Author: Felix Riemann -Date: Thu Aug 10 22:01:02 2017 +0200 - - docs: Improve compression of screenshots in documentation - - help/C/figures/image-view-prefs.png | Bin 32433 -> 23552 bytes - help/C/figures/multiple-convert.png | Bin 31895 -> 24376 bytes - help/C/figures/multiple-rename-count.png | Bin 31503 -> 24052 bytes - help/C/figures/plugin-send-by-mail.png | Bin 191185 -> 159940 bytes - help/C/figures/plugins-all.png | Bin 97608 -> 70229 bytes - help/C/figures/prefs-plugins-date.png | Bin 27821 -> 20448 bytes - help/C/figures/prefs-plugins-fullscreen.png | Bin 27774 -> 20424 bytes - help/C/figures/prefs-plugins.png | Bin 27959 -> 19979 bytes - help/C/figures/slideshow-prefs.png | Bin 21607 -> 15367 bytes - 9 files changed, 0 insertions(+), 0 deletions(-) - -commit ab6f705fe6aa2d4e5b0a80d2ce4a3d55a5c56178 -Author: Mario Blättermann -Date: Thu Aug 10 19:14:31 2017 +0000 - - Update German translation - - help/de/de.po | 802 +++++++++++++++++++++++++--------------------------------- - 1 file changed, 338 insertions(+), 464 deletions(-) - -commit 26dc7afed657e0820854dcc178abc53320b90c86 -Author: Marek Cernocky -Date: Thu Aug 10 16:16:45 2017 +0200 - - Updated Czech translation - - help/cs/cs.po | 739 ++++++++++++++++++++++------------------------------------ - 1 file changed, 285 insertions(+), 454 deletions(-) - -commit f69bfd9fb3521c82776cf288491ee468d2c5c94f -Author: Fran Dieguez -Date: Tue Aug 8 22:02:53 2017 +0000 - - Update Galician translation - - po/gl.po | 786 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 367 insertions(+), 419 deletions(-) - -commit eec19cc037d444960f62004702514bdc7648e250 -Author: Andre Klapper -Date: Tue Aug 8 20:32:35 2017 +0200 - - User docs: Cover 100% zoom keyboard shortcuts (bug 759434) - - help/C/zoom.page | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -commit a3118bf99502910234d9388ed2300d2c0f8c5451 -Author: Andre Klapper -Date: Tue Aug 8 20:26:18 2017 +0200 - - User docs: Remove outdated instructions also from page title - - help/C/edit.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ab3cdeae041e4d992a94e17e36bdc9a39dcbe044 -Author: Andre Klapper -Date: Tue Aug 8 20:25:04 2017 +0200 - - User docs: Update instructions where/how to find menu item in UI - - help/C/edit.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 86497053896961b3c7651d54c336c61d045e1596 -Author: Andre Klapper -Date: Tue Aug 8 20:24:31 2017 +0200 - - User docs: Update instructions where/how to find menu item in UI - - help/C/format-change.page | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 3a1dcf242db0b0b0f5c44f9ac09fa19a3391f1dc -Author: Andre Klapper -Date: Tue Aug 8 20:23:08 2017 +0200 - - User docs: Update instructions where/how to find menu item in UI - - help/C/open.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8fd622f854ee85a30b8348f641c659f2b1eeea55 -Author: Andre Klapper -Date: Tue Aug 8 20:22:43 2017 +0200 - - User docs: Update instructions where/how to find menu item in UI - - help/C/print.page | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 540f5c5083f99fbfdd0269c336b02976de162926 -Author: Andre Klapper -Date: Tue Aug 8 20:21:56 2017 +0200 - - User docs: Remove outdated instructions also from page title - - help/C/slideshow.page | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit c67be75f2b625f53fa926334111e6f9fc6a62e90 -Author: Andre Klapper -Date: Tue Aug 8 20:21:04 2017 +0200 - - User docs: Remove outdated instructions also from page title - - help/C/zoom.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 25f7251a626517c01e42901c663bbdd917a15be6 -Author: Andre Klapper -Date: Tue Aug 8 20:20:29 2017 +0200 - - User docs: Update instructions where/how to find menu item in UI - - help/C/desktop-background.page | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -commit 124353100ef9d8bfd04372696536f68d3770484f -Author: Andre Klapper -Date: Tue Aug 8 20:19:40 2017 +0200 - - User docs: Update instructions where/how to find menu item in UI - - help/C/rename-multiple.page | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit a11528e5bf9cf30f82adb43a9b88c5bd9f64106b -Author: Andre Klapper -Date: Tue Aug 8 20:16:06 2017 +0200 - - User docs: Update steps how to delete an opened image - - help/C/edit.page | 5 ++--- - 1 file changed, 2 insertions(+), 3 deletions(-) - -commit 14216a9cde5b65379d0f4eb510b823ff0c745063 -Author: Andre Klapper -Date: Tue Aug 8 20:15:22 2017 +0200 - - User docs: Update steps how to copy an opened image - - help/C/copy-paste.page | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - -commit 69a8f7169e9d07b2b01b51066612ba264ea7c04a -Author: Andre Klapper -Date: Tue Aug 8 20:13:46 2017 +0200 - - User docs: Remove 'Edit > Preferences' and update to title bar - - help/C/plugin-exif-digital.page | 34 ++++++++++++++---------------- - help/C/plugin-fullscreen-background.page | 12 +++++++---- - help/C/plugin-fullscreen-double-click.page | 8 +++---- - help/C/plugin-picasa.page | 15 +++++++------ - help/C/plugin-python-console.page | 13 ++++++------ - help/C/plugin-send-by-mail.page | 10 ++++----- - help/C/plugin-slideshow-shuffle.page | 8 +++---- - help/C/plugin-zoom-width.page | 8 +++---- - help/C/preferences.page | 4 ++-- - 9 files changed, 59 insertions(+), 53 deletions(-) - -commit 57db3502cdbd411fe1654bdacf7a9a0429b83cfd -Author: Andre Klapper -Date: Tue Aug 8 20:11:52 2017 +0200 - - User docs: Remove stray reference to removed toolbar.page - - help/C/zoom.page | 1 - - 1 file changed, 1 deletion(-) - -commit ae2293cef012ab32ce165890afacfa71572beac3 -Author: Andre Klapper -Date: Tue Aug 8 19:52:25 2017 +0200 - - User docs: Remove toolbar.page (functionality was removed in bug 740426) - - help/C/toolbar.page | 62 ----------------------------------------------------- - help/Makefile.am | 1 - - 2 files changed, 63 deletions(-) - -commit fb36ddf33f5d812e9d0cac29892aafc2dcbdb71c -Author: Andre Klapper -Date: Tue Aug 8 19:50:41 2017 +0200 - - User docs: Remove eog-toolbar-editor.png from Makefile.am to fix the build - - help/Makefile.am | 1 - - 1 file changed, 1 deletion(-) - -commit 3256f298a9630dd73bd07bfab9d504183936cd82 -Author: Andre Klapper -Date: Tue Aug 8 19:49:40 2017 +0200 - - User docs: Remove references to tool bar, update instructions to the UI - - help/C/zoom.page | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - -commit 5472e76ab6058deadb14f3c729c8c76b986b22f0 -Author: Andre Klapper -Date: Tue Aug 8 19:45:32 2017 +0200 - - User docs: Remove references to tool bar, update instructions to the UI - - help/C/view.page | 22 ++++++++++------------ - 1 file changed, 10 insertions(+), 12 deletions(-) - -commit 7f6b36e0c7e0eeb996e5bfb2143bc0fcd1179845 -Author: Andre Klapper -Date: Tue Aug 8 19:41:19 2017 +0200 - - User docs: Adjust instructions how to rotate to the UI overlay buttons - - help/C/flip-rotate.page | 13 ++++++------- - 1 file changed, 6 insertions(+), 7 deletions(-) - -commit a902d569a48ea90c3e2c8f07564bb4c608094727 -Author: Andre Klapper -Date: Tue Aug 8 19:34:38 2017 +0200 - - User docs: Remove outdated reference to toolbar (removed in bug 740426) - - help/C/flip-rotate.page | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -commit 0d4feca695936905c3de5cae40ace334bad79fc6 -Author: Andre Klapper -Date: Tue Aug 8 19:33:55 2017 +0200 - - User docs: Add comment that doc is wrong due to bug 786012 - - help/C/flip-rotate.page | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -commit c4976b26c870fd629a43be5466fda3d2f9363d4e -Author: Andre Klapper -Date: Tue Aug 8 19:19:34 2017 +0200 - - User docs: Remove Toolbar Editor screenshot - - Offers no additional info not already in the (outdated) help text. - - help/C/figures/eog-toolbar-editor.png | Bin 27416 -> 0 bytes - help/C/toolbar.page | 3 --- - 2 files changed, 3 deletions(-) - -commit 385490835d644a78ca349de408cd517ddcc9ec5b -Author: Andre Klapper -Date: Tue Aug 8 19:18:59 2017 +0200 - - User docs: Update old screenshots to reflect 3.24 UI - - help/C/figures/image-view-prefs.png | Bin 33011 -> 32433 bytes - help/C/figures/multiple-convert.png | Bin 30781 -> 31895 bytes - help/C/figures/multiple-rename-count.png | Bin 30254 -> 31503 bytes - help/C/figures/plugin-send-by-mail.png | Bin 62863 -> 191185 bytes - help/C/figures/plugins-all.png | Bin 90830 -> 97608 bytes - help/C/figures/prefs-plugins-date.png | Bin 29982 -> 27821 bytes - help/C/figures/prefs-plugins-fullscreen.png | Bin 30013 -> 27774 bytes - help/C/figures/prefs-plugins.png | Bin 28441 -> 27959 bytes - help/C/figures/slideshow-prefs.png | Bin 22467 -> 21607 bytes - 9 files changed, 0 insertions(+), 0 deletions(-) - -commit 22d60947e5ce6c192c8b9b30c234679a402f6e76 -Author: Marek Cernocky -Date: Tue Aug 8 11:15:09 2017 +0200 - - Updated Czech translation - - help/cs/cs.po | 337 +++++++++++++++++++++++++++++----------------------------- - 1 file changed, 168 insertions(+), 169 deletions(-) - -commit 56f6929e7cbd942790f7a2f49a08106d60348b72 -Author: Felix Riemann -Date: Mon Aug 7 21:33:13 2017 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 7b4f3e7f9156bb0ce55d8ae57141399b312d4d53 -Author: Felix Riemann -Date: Mon Aug 7 21:26:35 2017 +0200 - - Prepare release 3.25.90 - - NEWS | 27 +++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 28 insertions(+), 1 deletion(-) - -commit 0e7749ba0bfac7e72c19841afcbebb10851533b4 -Author: Bastien Nocera -Date: Fri Jul 14 11:41:38 2017 +0200 - - thumbnail: Remove use of obsolete gnome-desktop-thumbnail helper - - gnome_desktop_thumbnail_scale_down_pixbuf() is obsolete now that - gdk-pixbuf doesn't have the same bugs when shrinking images by large - factors. - - https://bugzilla.gnome.org/show_bug.cgi?id=784942 - - configure.ac | 2 +- - src/eog-thumbnail.c | 9 +++++---- - 2 files changed, 6 insertions(+), 5 deletions(-) - -commit 5b7b7f7b241b8874f79d5340e2912ce980153e6b -Author: Daniel Mustieles -Date: Mon Aug 7 10:32:49 2017 +0000 - - Update Spanish translation - - help/es/es.po | 74 +++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 49 insertions(+), 25 deletions(-) - -commit e942f41798d64791b73b3bd21aaa2950be38f26b -Author: Balasankar C -Date: Sat Aug 5 20:43:52 2017 +0000 - - Update Malayalam translation - - po/ml.po | 1999 +++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 1080 insertions(+), 919 deletions(-) - -commit 533682353453943980d7ca29a89b079bcdfc8dfc -Author: Andre Klapper -Date: Sat Aug 5 15:19:58 2017 +0200 - - User docs: Use https links - - help/C/develop.page | 2 +- - help/C/documentation.page | 4 ++-- - help/C/translate.page | 6 +++--- - 3 files changed, 6 insertions(+), 6 deletions(-) - -commit 40b391fd61ef1ff9024a98035ac5b9b0065b39af -Author: Anders Jonsson -Date: Sat Aug 5 09:57:21 2017 +0000 - - Update Swedish translation - - po/sv.po | 718 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 362 insertions(+), 356 deletions(-) - -commit 9dacff2cd1aa5928da2561361091ecd96d84e2cc -Author: Daniel Mustieles -Date: Sat Aug 5 11:49:12 2017 +0200 - - Updated Spanish translation - - help/es/es.po | 296 +++++++++++++++++++++++++++++----------------------------- - 1 file changed, 149 insertions(+), 147 deletions(-) - -commit 29c2b6727923a3707f4952f2553472e0dd20ed96 -Author: Balázs Meskó -Date: Fri Aug 4 13:32:37 2017 +0000 - - Update Hungarian translation - - po/hu.po | 720 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 363 insertions(+), 357 deletions(-) - -commit 84b8e0406a233044a6b33d292e624deeb9f2fe94 -Author: Matej Urbančič -Date: Wed Aug 2 10:26:10 2017 +0200 - - Updated Slovenian translation - - po/sl.po | 846 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 432 insertions(+), 414 deletions(-) - -commit 6c361a3dde0f2bc2324efc4802b0a647c870b9ed -Author: Mario Blättermann -Date: Tue Aug 1 20:55:15 2017 +0000 - - Update German translation - - help/de/de.po | 367 ++++++++++++++++++++++------------------------------------ - 1 file changed, 137 insertions(+), 230 deletions(-) - -commit 81c3d8f55a2eed1edb57691613a0597edc42e36c -Author: Anders Jonsson -Date: Mon Jul 31 23:22:40 2017 +0000 - - Update Swedish translation - - help/sv/sv.po | 287 +++++++++++++++++++++++++++++----------------------------- - 1 file changed, 144 insertions(+), 143 deletions(-) - -commit bc6c51751579c00ba7bfc4238e7ea237e70c0a01 -Author: Marek Cernocky -Date: Mon Jul 31 15:49:06 2017 +0200 - - Updated Czech translation - - po/cs.po | 743 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 360 insertions(+), 383 deletions(-) - -commit d81f76373aa7f3f5d3b1f4c933aee0b8c7ee7b9f -Author: Anders Jonsson -Date: Fri Jul 1 02:13:06 2016 +0200 - - Fix Bugzilla submit bug button text - - https://bugzilla.gnome.org/show_bug.cgi?id=767264#c2 - - help/C/bug-filing.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d77e2c06e9f7e2ea217c639622f1b51763d912d6 -Author: Çağatay Yiğit Şahin -Date: Fri Jul 28 09:58:47 2017 +0000 - - Update Turkish translation - - po/tr.po | 781 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 365 insertions(+), 416 deletions(-) - -commit 3ef0fad6ab410f44194c9492e26f72984a36adcc -Author: Dušan Kazik -Date: Thu Jul 13 18:29:00 2017 +0000 - - Update Slovak translation - - po/sk.po | 720 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 363 insertions(+), 357 deletions(-) - -commit d568760395ec72e6e9da7a17eae00989aebbd21d -Author: Trần Ngọc Quân -Date: Fri Jun 30 15:12:52 2017 +0700 - - Updated Vietnamese translation - - Signed-off-by: Trần Ngọc Quân - - po/vi.po | 714 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 359 insertions(+), 355 deletions(-) - -commit 702d70c28754f3b71b72584c27da19df914a020c -Author: Khaled Hosny -Date: Sat Jun 24 01:08:33 2017 +0200 - - Update Arabic translation - - po/ar.po | 836 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 425 insertions(+), 411 deletions(-) - -commit 867c3fd178840c1c8bdc83aa26d7a536d9fc5488 -Author: Felix Riemann -Date: Mon Jun 19 23:31:34 2017 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 53825ebbf52c2e42549975de3e746ed0461a33fa -Author: Felix Riemann -Date: Mon Jun 19 23:23:43 2017 +0200 - - Prepare release 3.25.1 - - NEWS | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - -commit f59aded11956056431c04f88a55af4dde5e504a0 -Author: Baurzhan Muftakhidinov -Date: Sat Jun 17 11:53:22 2017 +0000 - - Update Kazakh translation - - po/kk.po | 716 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 359 insertions(+), 357 deletions(-) - -commit a40f9e91992c5ce9c37cc531dc0d807c4c516191 -Author: Felix Riemann -Date: Thu Jun 8 08:11:27 2017 +0000 - - Update German translation - - po/de.po | 721 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 362 insertions(+), 359 deletions(-) - -commit 0503e50bd31975f0f2d12943bf51e4360f2bdf0e -Author: Kukuh Syafaat -Date: Wed Jun 7 05:16:43 2017 +0000 - - Update Indonesian translation - - po/id.po | 710 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 355 insertions(+), 355 deletions(-) - -commit b3bcb53d89c7844bfb19bb26e5367dacf6198bf0 -Author: Fabio Tomat -Date: Tue Jun 6 16:03:41 2017 +0000 - - Update Friulian translation - - po/fur.po | 714 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 358 insertions(+), 356 deletions(-) - -commit 8b572596ad841016617a19000f29b31244de90a3 -Author: Daniel Mustieles -Date: Mon Jun 5 14:09:17 2017 +0000 - - Update Spanish translation - - po/es.po | 714 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 358 insertions(+), 356 deletions(-) - -commit 6c073edc5645c4263fedf91b305b04ca4cda2948 -Author: Felix Riemann -Date: Sun Jun 4 20:07:15 2017 +0200 - - fullscreen: reload: Add translator comment to Icon keyword - - gettext also makes the Icon value translatable. - Tell translators that this value is actually an icon (file) name. - - plugins/fullscreen/fullscreen.plugin.desktop.in | 2 ++ - plugins/reload/reload.plugin.desktop.in | 2 ++ - 2 files changed, 4 insertions(+) - -commit beb99cfda1bfd9097e7b2ca3ec4d3950cb2b13b8 -Author: Ondrej Holy -Date: Mon May 15 10:27:03 2017 +0200 - - EogJobs: Try to mount volume if not already mounted - - It may happen for various reasons that somebody tries to open a - location, which is not already mounted. Consequently, "No images - found in '[location]'." error is shown to the user currently. Let's - try to mount the volume in such case instead of showing the error. - - https://bugzilla.gnome.org/show_bug.cgi?id=555831 - - src/eog-jobs.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 70 insertions(+), 1 deletion(-) - -commit 0c97d1c7da1af7e6dfd4f822fcf3363a1ae79ff0 -Author: Felix Riemann -Date: Sun Jun 4 16:20:36 2017 +0200 - - Update git.mk to recognize the gettext .m4s - - Revision d6caf0d1 from https://github.com/behdad/git.mk - - Makefile.am | 13 ++++--------- - git.mk | 41 +++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 45 insertions(+), 9 deletions(-) - -commit cda433d5a9020074156f16a86148d09121249f67 -Author: Felix Riemann -Date: Sun Jun 4 13:16:25 2017 +0200 - - Convert from intltool to gettext - - See https://wiki.gnome.org/Initiatives/GnomeGoals/GettextMigration - - Makefile.am | 7 +- - autogen.sh | 1 - - configure.ac | 6 +- - data/Makefile.am | 16 +++-- - data/{eog-app-menu.xml => eog-app-menu.ui} | 0 - data/eog.appdata.xml.in | 12 ++-- - data/eog.desktop.in.in | 11 ++- - plugins/Makefile.am | 8 ++- - plugins/fullscreen/fullscreen.plugin.desktop.in | 4 +- - plugins/reload/reload.plugin.desktop.in | 4 +- - .../statusbar-date.plugin.desktop.in | 4 +- - po/Makevars | 78 ++++++++++++++++++++++ - po/POTFILES.in | 23 +++---- - src/eog.gresource.xml | 2 +- - 14 files changed, 133 insertions(+), 43 deletions(-) - -commit 79ebfbc0a9a47c218d0c1df7d66bdb216c3f909f -Author: Felix Riemann -Date: Sun Jun 4 16:21:22 2017 +0200 - - Post-branch version bump - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 4d00c81c002331cac5ed1c7fa690c7bce25bc3de -Author: Emin Tufan Çetin -Date: Fri May 19 18:48:31 2017 +0000 - - Update Turkish translation - - po/tr.po | 413 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 225 insertions(+), 188 deletions(-) - -commit bd591759568444f2b79e360b00e7a27a1bbbb80d -Author: Fabio Tomat -Date: Fri May 5 15:57:18 2017 +0000 - - Update Friulian translation - - po/fur.po | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 98b51943f64a366c06906eb8d70115d81e21b7bb -Author: Fabio Tomat -Date: Fri May 5 15:54:58 2017 +0000 - - Update Friulian translation - - po/fur.po | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -commit aa3162566b9b661bd254a1414ceff30357f41926 -Author: Stas Solovey -Date: Thu Apr 13 11:47:31 2017 +0000 - - Update Russian translation - - po/ru.po | 16 +++++++--------- - 1 file changed, 7 insertions(+), 9 deletions(-) - -commit 5a71efaffe7338891e0a88d6ec023841b243cee4 -Author: Felix Riemann -Date: Mon Apr 10 20:48:12 2017 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c665b86c19cec9e9ec783adb062c387ddb46958c -Author: Felix Riemann -Date: Mon Apr 10 20:43:33 2017 +0200 - - Prepare release 3.24.1 - - NEWS | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - -commit d91cf5bc7f712d36fbc6dfb1b73130ea489931b1 -Author: Felix Riemann -Date: Wed Mar 29 20:56:11 2017 +0200 - - EogExifUtil: Fix build with older GCCs - - Older GCCs don't support pragma diagnostic in functions. - Move the pragmas outside to fix the build with these compilers. - - https://bugzilla.gnome.org/show_bug.cgi?id=780675 - - src/eog-exif-util.c | 16 ++++++++++------ - 1 file changed, 10 insertions(+), 6 deletions(-) - -commit 24d7db48431ebc8e9dd1afdbebe66b539706fc96 -Author: Rūdolfs Mazurs -Date: Sun Apr 9 14:28:52 2017 +0300 - - Update Latvian translation - - help/lv/lv.po | 718 ++++++++++++++++++++++++---------------------------------- - 1 file changed, 297 insertions(+), 421 deletions(-) - -commit 484d54db73f022692fb5250c2bf184db70d05ab8 -Author: gogo -Date: Sat Apr 8 19:42:29 2017 +0000 - - Update Croatian translation - - po/hr.po | 377 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 171 insertions(+), 206 deletions(-) - -commit 52803fb8572d51b9744ef860f171e8430b21ac10 -Author: Tom Tryfonidis -Date: Sat Apr 8 18:20:38 2017 +0000 - - Update Greek translation - - po/el.po | 254 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 132 insertions(+), 122 deletions(-) - -commit 2dbb5c7211923a0377115c596a8a0c4168208c2b -Author: Kjartan Maraas -Date: Sat Mar 25 12:09:28 2017 +0100 - - Updated Norwegian bokmål translation. - - po/nb.po | 52 +++++++++++----------------------------------------- - 1 file changed, 11 insertions(+), 41 deletions(-) - -commit 1251f8bd81350d72e2c8a5f26822929709b7412e -Author: Daniel Mustieles -Date: Wed Mar 22 09:10:41 2017 +0000 - - Update Spanish translation - - po/es.po | 79 ++++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 37 insertions(+), 42 deletions(-) - -commit 51524cd4ef14bb1556ebb0e255bb2f126272aa43 -Author: Felix Riemann -Date: Mon Mar 20 20:09:47 2017 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ffec937c4cb0fce2f5228199327be45a0a66f614 -Author: Felix Riemann -Date: Mon Mar 20 20:05:24 2017 +0100 - - Prepare release 3.24.0 - - NEWS | 12 ++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 14 insertions(+), 2 deletions(-) - -commit f3ecddd16cf203c7cac84cc1a5d0408038099583 -Author: Daniel Korostil -Date: Mon Mar 20 13:47:42 2017 +0200 - - Updated Ukrainian translation - - po/uk.po | 79 +++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 38 insertions(+), 41 deletions(-) - -commit a1d6b2cbbba53af2d490661f562a6ce4cadd8334 -Author: Gianvito Cavasoli -Date: Sun Mar 19 15:21:20 2017 +0000 - - Update Italian translation - - po/it.po | 297 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 181 insertions(+), 116 deletions(-) - -commit e530a9f0872a324fc0996d39770b77cba6bec9e8 -Author: Rūdolfs Mazurs -Date: Sat Mar 18 10:51:18 2017 +0200 - - Update Latvian translation - - po/lv.po | 280 +++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 174 insertions(+), 106 deletions(-) - -commit a806abef0a253d393576bb64a655c7aa9e59eab7 -Author: Changwoo Ryu -Date: Thu Mar 16 15:05:56 2017 +0000 - - Update Korean translation - - po/ko.po | 247 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 124 insertions(+), 123 deletions(-) - -commit 3434cfe699967bd7146746952a4246007a17420c -Author: gogo -Date: Wed Mar 15 19:42:41 2017 +0000 - - Update Croatian translation - - po/hr.po | 409 ++++++++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 284 insertions(+), 125 deletions(-) - -commit b6f1a5c63c0af17a4a5585c9ef046fd555d951fa -Author: Yuri Myasoedov -Date: Tue Mar 14 23:21:01 2017 +0400 - - Updated Russian translation - - po/ru.po | 251 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 116 insertions(+), 135 deletions(-) - -commit 8bd03cec68ade18227f2ba9a97da7d181304f508 -Author: Felix Riemann -Date: Mon Mar 13 21:30:11 2017 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 3db22803e49f4dc68ca82e8e9154d62cdee089e3 -Author: Felix Riemann -Date: Mon Mar 13 21:26:33 2017 +0100 - - Prepare release 3.23.92 - - NEWS | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - -commit 88f9be0b2f7790c1223cfecfc2026247e5e924c4 -Author: Dušan Kazik -Date: Sun Mar 12 09:47:31 2017 +0000 - - Update Slovak translation - - po/sk.po | 79 +++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 38 insertions(+), 41 deletions(-) - -commit 372d5570a04269416513238610ab39e23e4ecdf2 -Author: Jordi Mas -Date: Sun Mar 12 08:52:59 2017 +0100 - - Update Catalan translation - - po/ca.po | 109 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 60 insertions(+), 49 deletions(-) - -commit 0bb420f15597e94fa0b293846709e14f5adb42eb -Author: Мирослав Николић -Date: Sun Mar 12 07:55:07 2017 +0100 - - Updated Serbian translation - - po/sr.po | 139 ++++++++++++++++----------------------------------------- - po/sr@latin.po | 139 ++++++++++++++++----------------------------------------- - 2 files changed, 78 insertions(+), 200 deletions(-) - -commit 8c4fa1c1d4e0ce60d0695a2dadc7f56410bb8eec -Author: A S Alam -Date: Sat Mar 11 10:31:56 2017 -0600 - - updated Punjabi Translation - - po/pa.po | 866 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 549 insertions(+), 317 deletions(-) - -commit 3f604abf8996d7323c154917aefbe5377b73d751 -Author: Kukuh Syafaat -Date: Sat Mar 11 15:29:25 2017 +0000 - - Update Indonesian translation - - po/id.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit ccbc8b4f669b44772d3ff48e2241e63377c49f45 -Author: Fran Dieguez -Date: Sat Mar 11 03:04:19 2017 +0000 - - Update Galician translation - - po/gl.po | 282 +++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 176 insertions(+), 106 deletions(-) - -commit 326a85c1b428029a5ea862d88668a4bc2c47f6c7 -Author: Gábor Kelemen -Date: Thu Mar 9 22:27:04 2017 +0000 - - Update Hungarian translation - - po/hu.po | 81 +++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 39 insertions(+), 42 deletions(-) - -commit 39bde629df8f8d9a7dc76c1e8e258eaafa2e6540 -Author: Marek Cernocky -Date: Wed Mar 8 17:07:41 2017 +0100 - - Updated Czech translation - - po/cs.po | 79 +++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 38 insertions(+), 41 deletions(-) - -commit eaac82b1616552b40821f7bb97dc85fe85121e37 -Author: Joe Hansen -Date: Tue Mar 7 14:33:57 2017 +0100 - - Updated Danish translation - - po/da.po | 140 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 73 insertions(+), 67 deletions(-) - -commit 2b61673a8b3662daaff0582bf61de9c594dcf279 -Author: Trần Ngọc Quân -Date: Mon Mar 6 07:28:22 2017 +0700 - - Updated Vietnamese translation - - Signed-off-by: Trần Ngọc Quân - - po/vi.po | 234 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 122 insertions(+), 112 deletions(-) - -commit b329a6d1ae1079eabc52edef0d26f18c2ed55de4 -Author: Kukuh Syafaat -Date: Sun Mar 5 09:39:45 2017 +0000 - - Update Indonesian translation - - po/id.po | 75 +++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 36 insertions(+), 39 deletions(-) - -commit b66b0d304b2799faf385395a8b24c9de6a467f21 -Author: Aurimas Černius -Date: Sat Mar 4 18:43:54 2017 +0200 - - Updated Lithuanian translation - - po/lt.po | 232 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 121 insertions(+), 111 deletions(-) - -commit 73fda63aba499f0a7993a25d45cf8ab60b298823 -Author: Inaki Larranaga Murgoitio -Date: Thu Mar 2 19:22:36 2017 +0100 - - Update Basque language - - po/eu.po | 139 ++++++++++++++++++--------------------------------------------- - 1 file changed, 39 insertions(+), 100 deletions(-) - -commit c8619f2751d5bed353f65ef1124ec3bb7067ff30 -Author: Charles Monzat -Date: Thu Mar 2 12:07:57 2017 +0000 - - Update French translation - - po/fr.po | 137 ++++++++++++++++++--------------------------------------------- - 1 file changed, 38 insertions(+), 99 deletions(-) - -commit d2262fad5ebb9dad3e3410c4b5adeebf9864d860 -Author: Piotr Drąg -Date: Thu Mar 2 01:55:28 2017 +0100 - - Update Polish translation - - po/pl.po | 48 +++++++++--------------------------------------- - 1 file changed, 9 insertions(+), 39 deletions(-) - -commit 8d54c267f0c6098d12a84ce11d60aa9ebbc3cee9 -Author: Anders Jonsson -Date: Wed Mar 1 11:56:01 2017 +0000 - - Update Swedish translation - - po/sv.po | 251 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 144 insertions(+), 107 deletions(-) - -commit 62f87e956ea863415b7c4d38fbdc6cb1daecde1a -Author: Baurzhan Muftakhidinov -Date: Wed Mar 1 11:07:26 2017 +0000 - - Update Kazakh translation - - po/kk.po | 77 +++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 37 insertions(+), 40 deletions(-) - -commit 5fd19201d1aab6b43994089b91f8161f4687f347 -Author: Chao-Hsiung Liao -Date: Wed Mar 1 00:51:27 2017 +0000 - - Update Chinese (Taiwan) translation - - po/zh_TW.po | 79 +++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 38 insertions(+), 41 deletions(-) - -commit ffb34796ec2f04412e8f8fc6dac11a477ac7c7af -Author: Rafael Fontenelle -Date: Tue Feb 28 21:16:32 2017 +0000 - - Update Brazilian Portuguese translation - - po/pt_BR.po | 77 +++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 36 insertions(+), 41 deletions(-) - -commit f7adf3b1e267c971bd4fb7e7e2aec46e2089a1ab -Author: Fabio Tomat -Date: Tue Feb 28 20:22:04 2017 +0000 - - Update Friulian translation - - po/fur.po | 75 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 36 insertions(+), 39 deletions(-) - -commit 75323a5e1e444541a21bf3b144422a966448db7c -Author: Jiri Grönroos -Date: Tue Feb 28 19:04:10 2017 +0000 - - Update Finnish translation - - po/fi.po | 79 ++++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 37 insertions(+), 42 deletions(-) - -commit 7e8be87330334d9d16763c18f2bed96d6b676661 -Author: Mario Blättermann -Date: Tue Feb 28 17:37:40 2017 +0000 - - Update German translation - - po/de.po | 114 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 62 insertions(+), 52 deletions(-) - -commit ea537966f41e322047b968c0d98da40817fb39d3 -Author: Felix Riemann -Date: Mon Feb 27 23:19:43 2017 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 57b197d660f1deb0a400b6894a61b298621f90dd -Author: Felix Riemann -Date: Mon Feb 27 23:16:29 2017 +0100 - - Prepare release 3.23.91 - - NEWS | 33 +++++++++++++++++++++++++++++++++ - 1 file changed, 33 insertions(+) - -commit fbe623dbc8c12ef7244e5b39bec90ba1b9afd656 -Author: Felix Riemann -Date: Mon Feb 27 23:02:35 2017 +0100 - - EogZoomEntry: Fix translator comment picked up by gtk-doc - - src/eog-zoom-entry.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d487d38bb117bbbe63f286e56f105d2ad6902018 -Author: Felix Riemann -Date: Mon Feb 27 23:01:53 2017 +0100 - - EogZoomEntry: Allow whitespace between digits and percent sign - - This should make entering number easier if the displayed - text already contains a space. - - src/eog-zoom-entry.c | 13 +++++++++---- - 1 file changed, 9 insertions(+), 4 deletions(-) - -commit 69f2e329611f417057e115250c8608f9fc0cb009 -Author: Felix Riemann -Date: Mon Feb 27 20:03:01 2017 +0100 - - EogZoomEntry: Make zoom format string translatable - - Turns out the zoom value on the statusbar is translated - so this one needs to be translatable as well. - - src/eog-zoom-entry.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -commit 189dc493699e7e5a3a680a3f1e66b3aef58cd2a7 -Author: Felix Riemann -Date: Mon Feb 27 20:00:14 2017 +0100 - - EogZoomEntry: Remove unused translated text - - data/eog-zoom-entry.ui | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d6bc711ba7f7b00387843ebb7ed72d8aad83f073 -Author: Felix Riemann -Date: Sun Feb 26 18:02:07 2017 +0100 - - EogZoomEntry: Generate the menu entries at runtime - - This ensures the values listed match what is displayed after - selecting a zoom level. - - src/eog-zoom-entry.c | 51 +++++++++++++++++++++++++-------------------------- - 1 file changed, 25 insertions(+), 26 deletions(-) - -commit fcf9caf9c119a1b1787340681781518120f7821f -Author: Balázs Meskó -Date: Sun Feb 26 11:41:22 2017 +0000 - - Update Hungarian translation - - po/hu.po | 140 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 90 insertions(+), 50 deletions(-) - -commit f0052c1c29832cf7a3fda33ca5289625aeb770d1 -Author: Мирослав Николић -Date: Sun Feb 26 07:40:35 2017 +0100 - - Updated Serbian translation - - po/sr.po | 320 ++++++++++++++++++++++++++++++++++++-------------------- - po/sr@latin.po | 322 +++++++++++++++++++++++++++++++++++++-------------------- - 2 files changed, 415 insertions(+), 227 deletions(-) - -commit 209ad1516ce8cbfdc5c3890dbc9ead688c21aca8 -Author: Rafael Fontenelle -Date: Sat Feb 25 21:52:39 2017 +0000 - - Update Brazilian Portuguese translation - - po/pt_BR.po | 204 ++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 95 insertions(+), 109 deletions(-) - -commit db92245ac67599ca052452e124b3e4b3a3b0fad4 -Author: Fabio Tomat -Date: Fri Feb 24 15:37:05 2017 +0000 - - Update Friulian translation - - po/fur.po | 198 +++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 91 insertions(+), 107 deletions(-) - -commit 3adeb4923458e4480830c00ad8f69c481b30944d -Author: Alexandre Franke -Date: Thu Feb 23 12:22:41 2017 +0000 - - Update French translation - - po/fr.po | 309 +++++++++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 204 insertions(+), 105 deletions(-) - -commit ac4bc3a062f8538d0dbaa84b86a21ce6817f5205 -Author: Jordi Mas -Date: Wed Feb 22 21:18:50 2017 +0100 - - Fix Catalan translation - - help/ca/ca.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit e7f8392d979400a41e83aecf3585f885051f17f0 -Author: Kukuh Syafaat -Date: Wed Feb 22 14:56:48 2017 +0000 - - Update Indonesian translation - - po/id.po | 168 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 91 insertions(+), 77 deletions(-) - -commit 23916b23e2481899108ef3430ae335ae91562cab -Author: Chao-Hsiung Liao -Date: Wed Feb 22 01:28:55 2017 +0000 - - Update Chinese (Taiwan) translation - - po/zh_TW.po | 495 +++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 270 insertions(+), 225 deletions(-) - -commit ba5ddbd8f866298f15cd14c09026d1e1219930b9 -Author: Daniel Korostil -Date: Tue Feb 21 11:35:51 2017 +0200 - - Updated Ukrainian translation - - po/uk.po | 269 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 153 insertions(+), 116 deletions(-) - -commit 77bc85ae4931868daa04e87174585d72bbc8baa9 -Author: Piotr Drąg -Date: Sun Feb 19 21:55:48 2017 +0100 - - Update Polish translation - - po/pl.po | 145 +++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 91 insertions(+), 54 deletions(-) - -commit af13e9c4a3eca34fceb0079f6e3bab9f122c0a3e -Author: Kjartan Maraas -Date: Sat Feb 18 10:48:48 2017 +0100 - - Updated Norwegian bokmål translation. - - po/nb.po | 149 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 96 insertions(+), 53 deletions(-) - -commit a5dc33bcb39d8730e9f14de2fd4a66665b5274f8 -Author: Kjartan Maraas -Date: Sat Feb 18 10:40:47 2017 +0100 - - Updated Norwegian bokmål translation. - - po/nb.po | 8 +++----- - 1 file changed, 3 insertions(+), 5 deletions(-) - -commit 27799730a1f02e59f544286fc0760a2d6be93d01 -Author: Dušan Kazik -Date: Sat Feb 18 09:31:19 2017 +0000 - - Update Slovak translation - - po/sk.po | 144 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 92 insertions(+), 52 deletions(-) - -commit bb3a2d2058ea79ee7caa051971dd5f8ac2b6ac70 -Author: Inaki Larranaga Murgoitio -Date: Thu Feb 16 17:14:14 2017 +0100 - - Update Basque language - - po/eu.po | 341 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 220 insertions(+), 121 deletions(-) - -commit 97b32ec581fdd3861da931f8e3a0791ca262b512 -Author: Ask Hjorth Larsen -Date: Thu Feb 16 14:11:38 2017 +0100 - - Updated Danish translation - - po/da.po | 159 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 81 insertions(+), 78 deletions(-) - -commit 4a0470aa93e9d06be1d62967224d5e4944468896 -Author: Baurzhan Muftakhidinov -Date: Thu Feb 16 08:20:03 2017 +0000 - - Update Kazakh translation - - po/kk.po | 146 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 93 insertions(+), 53 deletions(-) - -commit 788ec755964bddc5cea58f2a7ab45569d28afb94 -Author: Felix Riemann -Date: Wed Feb 15 20:33:05 2017 +0100 - - EogZoomEntry: Disable the entry if no zooming is possible - - src/eog-zoom-entry.c | 36 ++++++++++++++++++++++++++++++++++-- - 1 file changed, 34 insertions(+), 2 deletions(-) - -commit 695f5e302caebcb7c659572c7a35feb822ba26bc -Author: Felix Riemann -Date: Wed Feb 15 20:26:40 2017 +0100 - - EogZoomEntry: Ensure the initial zoom value is correct - - src/eog-zoom-entry.c | 1 + - 1 file changed, 1 insertion(+) - -commit 0af0e656c523503dc5454414429c8eaf59e99269 -Author: Jiri Grönroos -Date: Wed Feb 15 18:37:04 2017 +0000 - - Update Finnish translation - - po/fi.po | 200 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 93 insertions(+), 107 deletions(-) - -commit bd979eba0c5816d701e47f2af4a87dee20758d26 -Author: Daniel Mustieles -Date: Wed Feb 15 09:31:24 2017 +0000 - - Update Spanish translation - - po/es.po | 198 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 92 insertions(+), 106 deletions(-) - -commit 80e5447b4ea2d4817f068f20f364aefc7dfe3e9e -Author: Felix Riemann -Date: Tue Feb 14 20:48:09 2017 +0100 - - EogZoomEntry: Move popover below the entry's icon - - src/eog-zoom-entry.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit a4cfef176916d1266e3181e9d48a9e9510f3a1a6 -Author: Felix Riemann -Date: Tue Feb 14 20:32:30 2017 +0100 - - EogZoomEntry: Set a minimum width for the popover - - This should avoid the menu looking somewhat cramped. - - https://bugzilla.gnome.org/show_bug.cgi?id=778573 - - src/eog-zoom-entry.c | 1 + - 1 file changed, 1 insertion(+) - -commit a1f169556b244ef5e0c463b4a90034890d939595 -Author: Felix Riemann -Date: Mon Feb 13 21:30:35 2017 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 142d69fa7181ba51f7f081f49d11a213892243c3 -Author: Felix Riemann -Date: Mon Feb 13 21:25:20 2017 +0100 - - Prepare release 3.23.90 - - NEWS | 18 ++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 19 insertions(+), 1 deletion(-) - -commit 8d59ada016f13b6aa9a86c2022fdfe4a6c8a755a -Author: Kukuh Syafaat -Date: Mon Feb 13 06:44:46 2017 +0000 - - Update Indonesian translation - - po/id.po | 437 +++++++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 298 insertions(+), 139 deletions(-) - -commit 969f7c6f3e30c8c62fbcf55e2033c5fc7d8fb671 -Author: Marek Černocký -Date: Sun Feb 12 22:38:54 2017 +0100 - - Updated Czech translation - - po/cs.po | 140 +++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 88 insertions(+), 52 deletions(-) - -commit b808b0ce72c0973878548ee2047935dd8f8a6b64 -Author: Felix Riemann -Date: Sun Feb 12 20:47:59 2017 +0100 - - EogZoomEntry: Add forgotten GtkBuilder template - - data/Makefile.am | 1 + - data/eog-zoom-entry.ui | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 75 insertions(+) - -commit 5c5c1249de9199ff11a1bae44a402a526ea81723 -Author: Felix Riemann -Date: Sun Feb 12 20:43:27 2017 +0100 - - EogZoomEntry: Setup Gettext/Intltool - - po/POTFILES.in | 2 ++ - 1 file changed, 2 insertions(+) - -commit b5d37f3916f7611082d1b20598f2e703d4f0fecb -Author: Felix Riemann -Date: Sun Feb 12 20:39:20 2017 +0100 - - EogZoomEntry: Replace zoom GtkRange - - This replaces the zoom GtkRange with a combined GtkEntry with buttons - and menu. This allows more control than the GtkRange-based solution - which wasn't even able to use the full zoom range. - EogZoomEntry is based on Evince's EvZoomAction. - - data/popup-menus.ui | 11 + - src/Makefile.am | 16 +- - src/eog-scroll-view.c | 674 +++++++++++++++++++++++++------------------------- - src/eog-scroll-view.h | 3 + - src/eog-window.c | 115 +-------- - src/eog-zoom-entry.c | 335 +++++++++++++++++++++++++ - src/eog-zoom-entry.h | 41 +++ - src/eog.gresource.xml | 1 + - 8 files changed, 746 insertions(+), 450 deletions(-) - -commit 277309100cb94526c3f439ac0d6eb9aa4076688d -Author: Felix Riemann -Date: Sun Feb 12 19:10:12 2017 +0100 - - EogWindow: Fix keyboard controls in the popover menu - - This imports and adapts a workaround from gedit that keeps the keyboard - controls working in the popover menu and other widgets in the headerbar. - We lose some inofficial keyboard shortcuts in the process, but as their - names say, they were "inofficial". Maybe we can find a way to make them - work again in the future. - - https://bugzilla.gnome.org/show_bug.cgi?id=754985 - - src/eog-application.c | 4 ++-- - src/eog-window.c | 45 +++++++++++++++++++++++++++++++++++++++++++-- - 2 files changed, 45 insertions(+), 4 deletions(-) - -commit 866816812589e98bd022dae70d48c90ac68b89ec -Author: Felix Riemann -Date: Sun Feb 12 18:32:53 2017 +0100 - - EogWindow: Handle "P" shortcut through global shortcuts - - src/eog-application.c | 1 + - src/eog-window.c | 9 --------- - 2 files changed, 1 insertion(+), 9 deletions(-) - -commit e9fc9d14b71fd5b7144df9aa894bec9b6732c305 -Author: Kjartan Maraas -Date: Sun Feb 12 13:41:21 2017 +0100 - - Updated Norwegian bokmål translation. - - po/nb.po | 129 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 63 insertions(+), 66 deletions(-) - -commit 44ea4a7c10f54c0b1b882a8dedc252a521c9ee89 -Author: Jordi Mas -Date: Tue Jan 24 17:35:02 2017 +0100 - - Update Catalan translation - - po/ca.po | 178 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 89 insertions(+), 89 deletions(-) - -commit d3442d2385cd43980a3a68e9071c95e47a2b4bd4 -Author: Dušan Kazik -Date: Wed Jan 18 18:56:08 2017 +0000 - - Update Slovak translation - - po/sk.po | 174 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 87 insertions(+), 87 deletions(-) - -commit bde2cde70621413769decb9f831738de584f6455 -Author: Felix Riemann -Date: Mon Jan 16 21:34:25 2017 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit f4cf4ccff4a17f8099f72db07ea19b77ec910d1b -Author: Felix Riemann -Date: Mon Jan 16 21:09:31 2017 +0100 - - Prepare release 3.23.1 - - NEWS | 26 +++++++++++++++++++++++++- - 1 file changed, 25 insertions(+), 1 deletion(-) - -commit bf35ab399273b5b9c703bc26e58899561be39ae2 -Author: Felix Riemann -Date: Mon Jan 16 20:58:39 2017 +0100 - - Update git.mk - - Revision dde0ab2d from https://github.com/behdad/git.mk - - git.mk | 42 +++++++++++++++++++++++++++++++++++++----- - 1 file changed, 37 insertions(+), 5 deletions(-) - -commit fab6251be6eb582f5a2ee37520a76d6540c42453 -Author: Felix Riemann -Date: Mon Jan 16 19:47:51 2017 +0100 - - configure: Remove deprecated GNOME_MAINTAINER_MODE_DEFINES - - configure.ac | 1 - - 1 file changed, 1 deletion(-) - -commit d64db0290e98b21f915aea75be020e051570c6e9 -Author: Rafael Fontenelle -Date: Sun Jan 15 18:30:53 2017 +0000 - - Update Brazilian Portuguese translation - - po/pt_BR.po | 358 +++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 207 insertions(+), 151 deletions(-) - -commit e557e8b6a40bf20ad0d9b868267817e3b3f25d7d -Author: Felix Riemann -Date: Fri Jan 6 21:14:18 2017 +0100 - - EogWindow: Fix sRGB display profile fallback on Wayland - - https://bugzilla.gnome.org/show_bug.cgi?id=776984 - - src/eog-window.c | 112 +++++++++++++++++++++++++++++-------------------------- - 1 file changed, 59 insertions(+), 53 deletions(-) - -commit 3de58ce27176925d705518b15264d80097245109 -Author: Felix Riemann -Date: Thu Dec 29 15:10:46 2016 +0100 - - EogScrollView: Switch from GtkDeviceManager to GdkSeat - - src/eog-scroll-view.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit a155efd0987358826e003ae413ca5bedb5f58216 -Author: Jiri Grönroos -Date: Sun Dec 25 13:19:55 2016 +0000 - - Update Finnish translation - - po/fi.po | 238 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 132 insertions(+), 106 deletions(-) - -commit 32d2210e970c24d8e6004415e6b9f8e5dd0f9f58 -Author: Mario Blättermann -Date: Tue Dec 20 18:32:01 2016 +0000 - - Update German translation - - po/de.po | 172 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 86 insertions(+), 86 deletions(-) - -commit daf10d9f1fd8e21c82e7318459a78d88b2e84a84 -Author: Balázs Meskó -Date: Tue Dec 20 15:27:46 2016 +0000 - - Update Hungarian translation - - po/hu.po | 200 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 100 insertions(+), 100 deletions(-) - -commit b9e65e2bb96a00b2e2f81b48a866e8e31f36cdc3 -Author: Marek Černocký -Date: Sun Dec 18 22:13:57 2016 +0100 - - Updated Czech translation - - po/cs.po | 175 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 88 insertions(+), 87 deletions(-) - -commit 548676912d91e8f42e5e600b2b21ab569d082000 -Author: Fabio Tomat -Date: Thu Dec 15 22:28:06 2016 +0000 - - Update Friulian translation - - po/fur.po | 177 +++++++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 117 insertions(+), 60 deletions(-) - -commit 7f5d33b6b1ca5b23abe0c10d7786567d29177866 -Author: Piotr Drąg -Date: Thu Dec 15 16:31:15 2016 +0100 - - Update Polish translation - - po/pl.po | 84 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 42 insertions(+), 42 deletions(-) - -commit bb43e716529211ed3b9fbaeae453b402c2b8cce5 -Author: Daniel Mustieles -Date: Thu Dec 15 09:05:56 2016 +0000 - - Update Spanish translation - - po/es.po | 299 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 162 insertions(+), 137 deletions(-) - -commit b973e770607ecfd7a989c9c0867c3f06be2541e6 -Author: Baurzhan Muftakhidinov -Date: Wed Dec 14 03:57:47 2016 +0000 - - Update Kazakh translation - - po/kk.po | 219 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 110 insertions(+), 109 deletions(-) - -commit 7684b1157b23228bbd6e4f13436224837a680b0e -Author: Piotr Drąg -Date: Sun Nov 6 15:45:08 2016 +0100 - - Use Unicode in translatable strings - - See https://developer.gnome.org/hig/stable/typography.html - - https://bugzilla.gnome.org/show_bug.cgi?id=774001 - - data/org.gnome.eog.gschema.xml.in | 10 +++++----- - src/eog-close-confirmation-dialog.c | 6 +++--- - src/eog-error-message-area.c | 6 +++--- - src/eog-image-jpeg.c | 4 ++-- - src/eog-window.c | 28 ++++++++++++++-------------- - src/main.c | 4 ++-- - 6 files changed, 29 insertions(+), 29 deletions(-) - -commit 12eb105e0e4a5e11b87c19f632551a675f67f442 -Author: Felix Riemann -Date: Sat Nov 19 19:17:37 2016 +0100 - - EogWindow: Fix leaked GVariant - - src/eog-window.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit e16b83ff369ec7e078faa948c1e1cb5a312299bf -Author: Felix Riemann -Date: Sat Nov 19 19:17:17 2016 +0100 - - EogApplication: Fix leaked GFile - - src/eog-application.c | 1 + - 1 file changed, 1 insertion(+) - -commit 73e3bd1f02769374c0b54d8407b78b9503942141 -Author: Felix Riemann -Date: Wed Nov 16 18:57:42 2016 +0100 - - EogScrollView: Replace deprecated gtk_menu_popup function - - src/eog-scroll-view.c | 17 ++--------------- - 1 file changed, 2 insertions(+), 15 deletions(-) - -commit d9240e1caee66946556fafb46a4709b543993072 -Author: Felix Riemann -Date: Wed Nov 16 18:12:55 2016 +0100 - - EogSidebar: Replace custom menu positioning function with built-in - - Gtk 3.22 has improved positioning functions for GtkMenu which - make it possible to drop our own positioning function. - This also works correctly in RTL locales now. - - configure.ac | 2 +- - src/eog-sidebar.c | 39 +++++++++------------------------------ - 2 files changed, 10 insertions(+), 31 deletions(-) - -commit 82a903e8e84c1e1120b3dca1f3c87afcb83167b2 -Author: Felix Riemann -Date: Wed Nov 16 18:11:36 2016 +0100 - - Post-branch version bump - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 3126ebacfb9e265570df04510bf2608ea8ce0823 -Author: Fabio Tomat -Date: Tue Nov 15 08:35:34 2016 +0000 - - Update Friulian translation - - po/fur.po | 50 +++++++++++++++++++++++++------------------------- - 1 file changed, 25 insertions(+), 25 deletions(-) - -commit 6b6b4a9fb40e757cd068ceca54a0eb39b67322e4 -Author: Dz Chen -Date: Sun Oct 30 15:36:37 2016 +0800 - - Update zh_CN translation - - po/zh_CN.po | 527 +++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 325 insertions(+), 202 deletions(-) - -commit 3b9ec952f76701e90c0239cc5987d05b9f0adcf3 -Author: Felix Riemann -Date: Tue Oct 11 19:40:29 2016 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d7ae13db01acb21054a329213f261626d66a7bfe -Author: Felix Riemann -Date: Tue Oct 11 19:36:52 2016 +0200 - - Prepare for release 3.20.5 - - NEWS | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - -commit e7f545175f73f2d4ac4a8e1f748045c57bd69162 -Author: Felix Riemann -Date: Sat Oct 8 22:48:54 2016 +0200 - - EogWindow: Fix bounds check in OpenWith action callback - - The previous check would let any index pass. - - src/eog-window.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit f8d3623cac31362c5075374f131323fdf45e4b5c -Author: Felix Riemann -Date: Sat Oct 8 21:55:49 2016 +0200 - - Fix GResource dependency calculation for out-of-tree builds - - src/Makefile.am | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -commit 4c86268436464ad17fcb75a45f73462b1300ef6a -Author: Felix Riemann -Date: Sat Oct 8 19:20:00 2016 +0200 - - EogThumbNav: Fix deprecated function warning - - Just call the callback function directly as that's why - the signal was manually triggered in the first place. - - src/eog-thumb-nav.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit b51b09964516ac3ef8845f1727d5ffc44c1aed49 -Author: Felix Riemann -Date: Sat Oct 8 19:03:05 2016 +0200 - - EogThumbNav: Fix deprecated min-slider-length CSS attribute - - GTK+ deprecated and ignored the attribute during the 3.20 cycle. - This replaces it with the min-width attribute, but requires - a slightly newer minimum GTK+ version. - - configure.ac | 2 +- - data/eog.css | 5 ++++- - 2 files changed, 5 insertions(+), 2 deletions(-) - -commit 85043d5c75bdd606dc4a059761582d007fdd967e -Author: Felix Riemann -Date: Tue Oct 4 19:33:49 2016 +0200 - - EogScrollView: Ensure view is redrawn if image is unset - - Otherwise the image could stay visible until the user triggers - a redraw, for example by mouse clicking. - - https://bugzilla.gnome.org/show_bug.cgi?id=772162 - - src/eog-scroll-view.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit b48a254295f91daf691cbfe3c6f22c55443c6a8f -Author: gogo -Date: Thu Sep 22 20:56:14 2016 +0000 - - Updated Croatian translation - - po/hr.po | 239 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--------- - 1 file changed, 205 insertions(+), 34 deletions(-) - -commit bfc0911ffbf3ddbb0d44c2361c8c58f4aae35fea -Author: Hannie Dumoleyn -Date: Thu Sep 15 11:51:30 2016 +0200 - - Updated Dutch translation Master 3.22 - - po/nl.po | 508 +++++++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 347 insertions(+), 161 deletions(-) - -commit 9a5d2a84938bcd06f7c57cf45750b9d0d9325cc7 -Author: Piotr Drąg -Date: Thu Sep 8 02:11:24 2016 +0200 - - Updated Polish translation - - po/pl.po | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 4a2746f74923cc4a07fbeafd7054b50825f75e72 -Author: Jeremy Bicha -Date: Sat Sep 3 22:30:48 2016 -0400 - - Fix typo in Spanish translation header - - po/es.po | 38 +++++++++++++++++++------------------- - 1 file changed, 19 insertions(+), 19 deletions(-) - -commit 6b022222195dc9a4905030829e64e0db57558318 -Author: Felix Riemann -Date: Sat Sep 3 19:51:38 2016 +0200 - - Fix Python 3 incompatibility in installed tests - - It's a list in Py2 but an iterator in Py3 now, - but it shouldn't make a difference to the for-operator. - - tests/common_steps.py | 2 +- - tests/steps/steps.py | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit e1b215f8926af391dd6f9a57f21e1ae9428686a2 -Author: David King -Date: Sat Sep 3 17:59:19 2016 +0200 - - Update British English translation - - po/en_GB.po | 1703 +++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 946 insertions(+), 757 deletions(-) - -commit 2ca0ec45ff83318892bf96209efdff590761da5d -Author: Matej Urbančič -Date: Thu Aug 25 21:10:17 2016 +0200 - - Updated Slovenian translation - - po/sl.po | 470 ++++++++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 316 insertions(+), 154 deletions(-) - -commit 63ee4c9af8f572a372518187c9edc50f2847c8bc -Author: Piotr Drąg -Date: Sun Aug 21 18:32:56 2016 +0200 - - Updated Polish translation - - po/pl.po | 172 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 84 insertions(+), 88 deletions(-) - -commit 0c77e6ef23b35aa42532a0cb1d61131d22fbc994 -Author: Felix Riemann -Date: Sun Aug 21 16:47:41 2016 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ea12a9d5260b539dc6bffdb71a8f0b5d1ca77213 -Author: Felix Riemann -Date: Sun Aug 21 16:33:54 2016 +0200 - - Prepare for release 3.20.4 - - NEWS | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - -commit e99a8c00f959652fe7c10e2fa5a3a7a5c25e6af4 -Author: Felix Riemann -Date: Sun Aug 21 15:56:46 2016 +0200 - - EogErrorMessageArea: Make sure error messages are valid UTF8 - - GMarkup requires valid UTF8 input strings and would cause odd - looking messages if given invalid input. This could also trigger an - out-of-bounds write in glib before 2.44.1. Reported by kaslovdmitri. - - https://bugzilla.gnome.org/show_bug.cgi?id=770143 - - src/eog-error-message-area.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -commit 55036c6d55b06e82a480b559d59f5effae26399d -Author: Felix Riemann -Date: Sun Aug 21 15:32:31 2016 +0200 - - EogImage: Fix leaked GError when loading an SVG fails - - Make sure the GError is not overwritten when closing the - handle if loading already failed earlier on. - This will handle SVG errors similar to errors from GdkPixbuf. - - https://bugzilla.gnome.org/show_bug.cgi?id=770197 - - src/eog-image.c | 11 +++++++---- - 1 file changed, 7 insertions(+), 4 deletions(-) - -commit 05ba302f51e1ab2a4ebfb048c0a429eb60c6eb4f -Author: Sinisa Habek -Date: Fri Jul 29 16:00:04 2016 +0000 - - Updated Croatian translation - - po/hr.po | 2130 +++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 1209 insertions(+), 921 deletions(-) - -commit a362f32344772362d1762412286e0df3b26ddde9 -Author: Piotr Drąg -Date: Fri Jul 15 20:52:15 2016 +0200 - - Add Language headers to po files - - Future versions of gettext will fail if this header is missing. - - po/am.po | 1 + - po/az.po | 1 + - po/be@latin.po | 1 + - po/bn.po | 1 + - po/bn_IN.po | 1 + - po/br.po | 1 + - po/ca@valencia.po | 2 +- - po/cy.po | 1 + - po/dz.po | 1 + - po/en@shaw.po | 1 + - po/es.po | 2 +- - po/fur.po | 2 +- - po/fy.po | 1 + - po/gu.po | 2 +- - po/hr.po | 1 + - po/it.po | 2 +- - po/ka.po | 1 + - po/km.po | 2 +- - po/ko.po | 2 +- - po/ks.po | 1 + - po/ku.po | 1 + - po/mai.po | 1 + - po/mg.po | 1 + - po/mk.po | 1 + - po/mn.po | 1 + - po/ms.po | 1 + - po/my.po | 1 + - po/nds.po | 1 + - po/nn.po | 1 + - po/nso.po | 1 + - po/or.po | 1 + - po/ps.po | 1 + - po/ru.po | 2 +- - po/rw.po | 1 + - po/si.po | 1 + - po/sl.po | 2 +- - po/sq.po | 1 + - po/sr@latin.po | 2 +- - po/ta.po | 2 +- - po/tk.po | 1 + - po/ug.po | 2 +- - po/uz.po | 1 + - po/uz@cyrillic.po | 1 + - po/wa.po | 1 + - po/zh_HK.po | 1 + - 45 files changed, 45 insertions(+), 12 deletions(-) - -commit 8582fed68abd401e6bd2012163a6f04d59dc9723 -Author: Muhammet Kara -Date: Sat Jul 2 22:40:58 2016 +0000 - - Updated Turkish translation - - po/tr.po | 504 +++++++++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 330 insertions(+), 174 deletions(-) - -commit 7876998b08e5e22d9b82922dcf97c4a3f5e799dc -Author: Sebastian Rasmussen -Date: Mon Jun 20 19:19:25 2016 +0000 - - Updated Swedish translation - - help/sv/sv.po | 1091 ++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 729 insertions(+), 362 deletions(-) - -commit 7abc7764da32a3097f038ec1dc41e338368a6a69 -Author: Felix Riemann -Date: Mon Jun 20 19:40:17 2016 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0ad859e6a4546cef0915902f6181fcd8f5a1ee0e -Author: Felix Riemann -Date: Mon Jun 20 19:33:15 2016 +0200 - - Prepare for release 3.20.3 - - NEWS | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - -commit 7e32c42ef40a2fd19227b397913c063bd33f831b -Author: Felix Riemann -Date: Mon Jun 20 18:59:07 2016 +0200 - - EogListStore: Use the CHANGES_DONE_HINT to detect file changes - - This avoids problems with the collection because of the file - not being recognized as a valid image while the changes are written. - - https://bugzilla.gnome.org/show_bug.cgi?id=767003 - - src/eog-list-store.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit ca4c09a64b3f33abe67d46b8dbd4e44e1e028af5 -Author: Felix Riemann -Date: Mon Jun 13 20:35:52 2016 +0200 - - EogExifUtil: Fix build with newer GCC - - Newer gcc may produce an error if they cannot - check the format arguments. - - src/eog-exif-util.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -commit fe8135a278da7f263978a60616a8fe8cb1cfd159 -Author: Cédric Valmary -Date: Mon May 30 20:08:33 2016 +0000 - - Updated Occitan translation - - po/oc.po | 1725 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 868 insertions(+), 857 deletions(-) - -commit dee44d9bdc559896e81c39db0292e728c7faf260 -Author: Frédéric Péters -Date: Fri May 27 13:59:27 2016 +0200 - - po: French translation quick fix - - po/fr.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit cea2eef5d59d2f7b2d3a320bbc78b2b373b60ce1 -Author: Theppitak Karoonboonyanan -Date: Tue May 24 14:53:53 2016 +0700 - - Updated Thai translation - - po/th.po | 1516 +++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 809 insertions(+), 707 deletions(-) - -commit 3bff39c59b70eb7005f03c02f9cfe70cbec5870e -Author: Kjartan Maraas -Date: Mon May 23 19:11:33 2016 +0200 - - Updated Norwegian bokmål translation. - - po/nb.po | 146 +++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 90 insertions(+), 56 deletions(-) - -commit 7192e15a8096401272c8f8d7893165f1502eaed5 -Author: Sveinn í Felli -Date: Sat May 14 22:42:53 2016 +0000 - - Updated Icelandic translation - - po/is.po | 480 ++++++++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 325 insertions(+), 155 deletions(-) - -commit 99970941bd75584df6f70a24aa99fd3f3633664c -Author: Daniel Șerbănescu -Date: Thu May 12 16:54:58 2016 +0000 - - Updated Romanian translation - - po/ro.po | 346 +++++++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 238 insertions(+), 108 deletions(-) - -commit db6c4962f6c51f402087b51a8158195cb0479c07 -Author: Felix Riemann -Date: Mon May 9 21:23:13 2016 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 082628f6b410bca46cf7b92dfc9cc1a4a07d21f3 -Author: Felix Riemann -Date: Mon May 9 21:20:28 2016 +0200 - - Prepare for release 3.20.2 - - NEWS | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - -commit 5d9b268e13c1d5d52cd65452902222b5e9aac52b -Author: sujiniku -Date: Sun May 8 22:33:40 2016 +0900 - - Updated Japanese translation - - help/ja/figures/image-view-prefs.png | Bin 0 -> 49743 bytes - help/ja/figures/multiple-convert.png | Bin 0 -> 49541 bytes - help/ja/figures/multiple-rename-count.png | Bin 0 -> 51246 bytes - help/ja/figures/plugin-send-by-mail.png | Bin 0 -> 30654 bytes - help/ja/figures/plugins-all.png | Bin 0 -> 141723 bytes - help/ja/figures/prefs-plugins-date.png | Bin 0 -> 47352 bytes - help/ja/figures/prefs-plugins-fullscreen.png | Bin 0 -> 47187 bytes - help/ja/figures/prefs-plugins.png | Bin 0 -> 44690 bytes - help/ja/figures/slideshow-prefs.png | Bin 0 -> 32054 bytes - help/ja/ja.po | 1597 ++++++++++++++++---------- - 10 files changed, 982 insertions(+), 615 deletions(-) - -commit 79934d1f4d42d62d82cd3b3f06c66b396df8918d -Author: Jiro Matsuzawa -Date: Sun May 8 22:27:51 2016 +0900 - - l10n: Delete obsolete screenshots - - help/ja/figures/eog-toolbar-editor.png | Bin 12107 -> 0 bytes - help/ja/figures/image-view-prefs.png | Bin 13871 -> 0 bytes - help/ja/figures/multiple-convert.png | Bin 12553 -> 0 bytes - help/ja/figures/multiple-rename-count.png | Bin 13359 -> 0 bytes - help/ja/figures/plugin-send-by-mail.png | Bin 22025 -> 0 bytes - help/ja/figures/plugin-tools-flickr.png | Bin 21927 -> 0 bytes - help/ja/figures/plugins-all.png | Bin 25758 -> 0 bytes - help/ja/figures/prefs-plugins-date.png | Bin 14016 -> 0 bytes - help/ja/figures/prefs-plugins-fullscreen.png | Bin 13681 -> 0 bytes - help/ja/figures/prefs-plugins.png | Bin 13173 -> 0 bytes - help/ja/figures/slideshow-prefs.png | Bin 10748 -> 0 bytes - 11 files changed, 0 insertions(+), 0 deletions(-) - -commit c80b70734f91e4f35fabad6c3c48e335a19f084c -Author: GNOME Translation Robot -Date: Fri Apr 29 10:17:04 2016 +0000 - - Updated Scottish Gaelic translation - - po/gd.po | 337 ++++++++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 238 insertions(+), 99 deletions(-) - -commit d88f084cae9e30482af169a2fbcfc387828b3854 -Author: GNOME Translation Robot -Date: Wed Apr 27 19:01:53 2016 +0000 - - Updated Portuguese translation - - po/pt.po | 231 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 136 insertions(+), 95 deletions(-) - -commit fbe0a95e7b535fc4950c30910574a0eb0e1ac455 -Author: Fabio Tomat -Date: Fri Apr 15 23:25:08 2016 +0000 - - Updated Friulian translation - - po/fur.po | 32 ++++++++++++++++---------------- - 1 file changed, 16 insertions(+), 16 deletions(-) - -commit ec5c004867ede6c104c281a58fb0a71f650f4871 -Author: Felix Riemann -Date: Mon Apr 11 22:00:50 2016 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 4c30407752262b373216f057c9acb8a217ac5cae -Author: Felix Riemann -Date: Mon Apr 11 21:57:43 2016 +0200 - - Prepare for release 3.20.1 - - NEWS | 20 +++++++++++++++++++- - 1 file changed, 19 insertions(+), 1 deletion(-) - -commit 65e61ccc81987643d9642a3b2bd49dd01674b591 -Author: Debarshi Ray -Date: Thu Apr 7 10:14:19 2016 +0200 - - Reduce the number of g_file_query_info calls at start-up - - https://bugzilla.gnome.org/show_bug.cgi?id=764139 - - src/eog-image.c | 3 ++- - src/eog-image.h | 2 +- - src/eog-list-store.c | 41 ++++++++++++++++++++++++++++++----------- - 3 files changed, 33 insertions(+), 13 deletions(-) - -commit 14401d33e74946f0833e040434713da12745ef58 -Author: Debarshi Ray -Date: Thu Apr 7 09:27:06 2016 +0200 - - EogImage: Remove unused constructor - - https://bugzilla.gnome.org/show_bug.cgi?id=764139 - - src/eog-image.c | 12 ------------ - src/eog-image.h | 2 -- - 2 files changed, 14 deletions(-) - -commit 0cef44d7e3d17e30ff61138a8614697157ea3c35 -Author: Fabio Tomat -Date: Sat Apr 9 09:56:56 2016 +0000 - - Updated Friulian translation - - po/fur.po | 169 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 84 insertions(+), 85 deletions(-) - -commit 160600f2510a01332e956f7c36f821d5f6eb8d66 -Author: Arash Mousavi -Date: Sat Apr 9 13:40:52 2016 +0430 - - Update Persian translations - - po/fa.po | 701 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 421 insertions(+), 280 deletions(-) - -commit 8169e0ac6447ebeb1d1e809213ce82b814b62550 -Author: Debarshi Ray -Date: Thu Apr 7 20:13:16 2016 +0200 - - EogScrollView: Prevent a crash when queueing a new draw - - Fall out from 88c4f54eb9cee69b1eebef462df27f76119bec62 - - https://bugzilla.gnome.org/show_bug.cgi?id=665897 - - src/eog-scroll-view.c | 1 + - 1 file changed, 1 insertion(+) - -commit 9d4580b2d7d72baf712ff46cb3e1ab66c1dcf9db -Author: Andika Triwidada -Date: Tue Apr 5 09:39:47 2016 +0000 - - Updated Indonesian translation - - po/id.po | 755 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 390 insertions(+), 365 deletions(-) - -commit fb68bd1470056c6beb1aadf988858e418ea1cbf2 -Author: Richard Hughes -Date: Mon Mar 28 16:32:52 2016 +0100 - - AppData: Mark as unremovable in GNOME Software - - data/eog.appdata.xml.in | 1 + - 1 file changed, 1 insertion(+) - -commit 8809eb8af5b9f8f3f6c742f0cd0f25209aace1f9 -Author: Trần Ngọc Quân -Date: Sun Mar 27 08:50:03 2016 +0700 - - Updated Vietnamese translation - - Signed-off-by: Trần Ngọc Quân - - po/vi.po | 472 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 299 insertions(+), 173 deletions(-) - -commit 96073162258fe9d70def7fb9a549dcef3095bb2b -Author: Fabio Tomat -Date: Wed Mar 23 11:53:26 2016 +0000 - - Updated Friulian translation - - po/fur.po | 700 +++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 414 insertions(+), 286 deletions(-) - -commit ef2fa5461f8b8dcfd5791296c75e0f046cf8a8ca -Author: Felix Riemann -Date: Tue Mar 22 11:50:23 2016 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit da9f51ca9ca9b9d6feed64618196b6ef384bdbde -Author: Felix Riemann -Date: Tue Mar 22 11:47:07 2016 +0100 - - Prepare for release 3.20.0 - - NEWS | 12 ++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 14 insertions(+), 2 deletions(-) - -commit bf1fa88a21cea8c6bb14da83757fac4077310294 -Author: Ask Hjorth Larsen -Date: Sun Mar 20 23:09:40 2016 +0100 - - Updated Danish translation - - po/da.po | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - -commit 5b547c15100a954e7f34928f787f44b5c4e44ce6 -Author: Inaki Larranaga Murgoitio -Date: Sun Mar 20 19:07:38 2016 +0100 - - Updated Basque language - - po/eu.po | 452 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 289 insertions(+), 163 deletions(-) - -commit 34de8b0914c663c3a9920e3841c1cddc02523c26 -Author: Gianvito Cavasoli -Date: Sun Mar 20 17:09:34 2016 +0000 - - Updated Italian translation - - po/it.po | 411 +++++++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 284 insertions(+), 127 deletions(-) - -commit d3e92aa5af77e9a8023ae99ce4e94cd952bccf54 -Author: Милош Поповић -Date: Sun Mar 20 11:00:33 2016 +0000 - - Updated Serbian Latin translation - - po/sr@latin.po | 173 +++++++++++++++++++++++++-------------------------------- - 1 file changed, 76 insertions(+), 97 deletions(-) - -commit 19365bead0bf84897a012a98d177307639d3fc94 -Author: Марко Костић -Date: Sun Mar 20 10:59:34 2016 +0000 - - Updated Serbian translation - - po/sr.po | 173 ++++++++++++++++++++++++++++----------------------------------- - 1 file changed, 76 insertions(+), 97 deletions(-) - -commit 77f05e7ee6e3efcab15ebcad02f5a0a507162fc5 -Author: Ask Hjorth Larsen -Date: Sat Mar 19 16:35:00 2016 +0100 - - Updated Danish translation by scootergrisen - - po/da.po | 941 +++++++++++++++++++++++++-------------------------------------- - 1 file changed, 374 insertions(+), 567 deletions(-) - -commit 6738cc1c3b24589d4933e1bc9407035ca5d83d18 -Author: Changwoo Ryu -Date: Wed Mar 16 20:00:07 2016 +0000 - - Updated Korean translation - - po/ko.po | 424 +++++++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 293 insertions(+), 131 deletions(-) - -commit 72f378e7fe91d9c6b14a672ce566f8f21aeb0423 -Author: Felix Riemann -Date: Mon Mar 14 20:44:05 2016 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b5196a06cc891195914251b756362759201cee0a -Author: Felix Riemann -Date: Mon Mar 14 20:39:25 2016 +0100 - - Prepare for release 3.19.92 - - NEWS | 25 +++++++++++++++++++++++++ - 1 file changed, 25 insertions(+) - -commit 4e74b7661893e64547858db6e4775e012bb63e0a -Author: Debarshi Ray -Date: Fri Mar 11 19:01:22 2016 +0100 - - EogPrintPreview: Silence -Wswitch-default - - https://bugzilla.gnome.org/show_bug.cgi?id=763505 - - src/eog-print-preview.c | 8 +++++++- - 1 file changed, 7 insertions(+), 1 deletion(-) - -commit be81fa70d6f8ca82ee9beec8dbaf5391f9c5d36a -Author: Debarshi Ray -Date: Fri Mar 11 18:54:49 2016 +0100 - - EogPrintPreview: Silence -Wsign-compare - - https://bugzilla.gnome.org/show_bug.cgi?id=763505 - - src/eog-print-preview.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -commit 43e5257c08f06e252e1e4aafc549bc29bc82e002 -Author: Jiro Matsuzawa -Date: Mon Mar 14 14:42:21 2016 +0000 - - Updated Japanese translation - - po/ja.po | 81 ++++++++++++++++++++++++++++++++++++++++++++++------------------ - 1 file changed, 59 insertions(+), 22 deletions(-) - -commit 3b5852bb17995ba9c03c8b1cec133fb684e5e22b -Author: Piotr Drąg -Date: Mon Mar 14 04:10:35 2016 +0100 - - Updated Polish translation - - po/pl.po | 64 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 32 insertions(+), 32 deletions(-) - -commit c3e2802e3c5c3bb96185d2b40812ecbad13b3e01 -Author: Jiri Grönroos -Date: Sun Mar 13 13:30:04 2016 +0000 - - Updated Finnish translation - - po/fi.po | 175 ++++++++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 117 insertions(+), 58 deletions(-) - -commit 9b268017af020589948dfde1bae292e2093e0e75 -Author: Jordi Mas -Date: Fri Mar 11 19:01:00 2016 +0100 - - Fix to Catalan translation - - po/ca.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b874815a09d4385065f19a650e7b5e06c7e6fa5f -Author: Robert Ancell -Date: Thu Mar 10 16:55:24 2016 +1300 - - EogWindow: Correctly check the value of XDG_CURRENT_DESKTOP - - XDG_CURRENT_DESKTOP is a list of desktop names, check if any value matches Unity. - - src/eog-window.c | 25 ++++++++++++++++++++++++- - 1 file changed, 24 insertions(+), 1 deletion(-) - -commit 7bf215e203e07560f9623697fe1f1c702e8d82f6 -Author: Aurimas Černius -Date: Sat Mar 5 21:50:29 2016 +0200 - - Updated Lithuanian translation - - po/lt.po | 80 +++++++++++++++++++++++++++++++++++++++++++++++----------------- - 1 file changed, 59 insertions(+), 21 deletions(-) - -commit 074d43599bd1cfed848f1f993a3d583bae17122c -Author: Rūdolfs Mazurs -Date: Sat Mar 5 14:12:12 2016 +0200 - - Update Latvian translation - - po/lv.po | 78 ++++++++++++++++------------------------------------------------ - 1 file changed, 19 insertions(+), 59 deletions(-) - -commit e559d7063d8a66f9b51ed54e71b8a8e0a6a25f9b -Author: Daniel Korostil -Date: Fri Mar 4 15:24:32 2016 +0200 - - Updated Ukrainian translation - - po/uk.po | 556 +++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 346 insertions(+), 210 deletions(-) - -commit ea41a6fe826b46cd04bb8b53958e26c3f961795b -Author: Stas Solovey -Date: Thu Mar 3 11:50:14 2016 +0000 - - Updated Russian translation - - po/ru.po | 467 ++++++++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 327 insertions(+), 140 deletions(-) - -commit bea73bcc4b9b54b15f24166eac9d7e9c1b881442 -Author: Yosef Or Boczko -Date: Wed Mar 2 21:24:40 2016 +0200 - - Updated Hebrew translation - - po/he.po | 84 +++++++++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 59 insertions(+), 25 deletions(-) - -commit 8d9a3a2ab0f0bdf7f4343dac2367c20b713a0cae -Author: Khaled Hosny -Date: Wed Mar 2 11:37:25 2016 +0400 - - Update Arabic translation - - po/ar.po | 463 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 293 insertions(+), 170 deletions(-) - -commit d1f6bddd6e04b147e889c2c8d73a38bc0c91ecad -Author: Efstathios Iosifidis -Date: Tue Mar 1 23:17:13 2016 +0000 - - Updated Greek translation - - po/el.po | 47 +++++++++++++++++++++++++---------------------- - 1 file changed, 25 insertions(+), 22 deletions(-) - -commit 7407cc63257f0f8dc23c00c1e542e1f8e2ec88b6 -Author: Dušan Kazik -Date: Tue Mar 1 20:04:50 2016 +0000 - - Updated Slovak translation - - po/sk.po | 45 ++++++++++++++++++++++++--------------------- - 1 file changed, 24 insertions(+), 21 deletions(-) - -commit 23fa87328ff3a213da67b846c156dac3c0f13672 -Author: Felix Riemann -Date: Mon Feb 29 20:58:27 2016 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8bed5795d674acdcd101c32d6237247744340ae0 -Author: Felix Riemann -Date: Mon Feb 29 20:56:31 2016 +0100 - - Prepare for release 3.19.91 - - NEWS | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - -commit 6ed4e90a9d08c26e133ee7d707a36240acd0ed62 -Author: Jordi Mas -Date: Sun Feb 28 22:49:14 2016 +0100 - - Update Catalan translation - - po/ca.po | 460 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 296 insertions(+), 164 deletions(-) - -commit a59c31e4e22a80e5a71516f1544489162218a020 -Author: Alexandre Franke -Date: Sun Feb 28 19:34:01 2016 +0000 - - Updated French translation - - po/fr.po | 43 +++++++++++++++++++++++-------------------- - 1 file changed, 23 insertions(+), 20 deletions(-) - -commit 7d6db46b4f759ba2ef94bc6737d16030b838b132 -Author: Marek Černocký -Date: Thu Feb 25 11:37:07 2016 +0100 - - Updated Czech translation - - po/cs.po | 74 ++++++++++++++++++++++++++++++++++++++++++++++------------------ - 1 file changed, 54 insertions(+), 20 deletions(-) - -commit dec9785d7d9bcde41332cfb94680f552b08b1184 -Author: Fran Dieguez -Date: Wed Feb 24 15:09:36 2016 +0100 - - Updated Galician translations - - po/gl.po | 466 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 296 insertions(+), 170 deletions(-) - -commit 6c0ba41120ad907daea20b0119a0f6c1753bcbf6 -Author: Anders Jonsson -Date: Sun Feb 21 21:39:30 2016 +0000 - - Updated Swedish translation - - po/sv.po | 196 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++------- - 1 file changed, 177 insertions(+), 19 deletions(-) - -commit 354c89cd36616e62742a464140e69d075afb3881 -Author: Мирослав Николић -Date: Sat Feb 20 10:06:04 2016 +0100 - - Updated Serbian translation - - po/sr.po | 493 ++++++++++++++++++++++++++++++++++++++------------------- - po/sr@latin.po | 493 ++++++++++++++++++++++++++++++++++++++------------------- - 2 files changed, 652 insertions(+), 334 deletions(-) - -commit d9a509adefade3ee02e26c86c1419ac0cf236e52 -Author: Piotr Drąg -Date: Wed Feb 17 22:39:57 2016 +0100 - - Updated Polish translation - - po/pl.po | 37 ++++++++++++++++++------------------- - 1 file changed, 18 insertions(+), 19 deletions(-) - -commit aea617e11c8cf364d0bce25cfc8053e4ec44eda9 -Author: Felix Riemann -Date: Mon Feb 15 21:02:19 2016 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ebdcf2c619262c66309328be7297b53e3aa76ad6 -Author: Felix Riemann -Date: Mon Feb 15 20:59:46 2016 +0100 - - Prepare for release 3.19.90 - - NEWS | 33 +++++++++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 34 insertions(+), 1 deletion(-) - -commit 88c4f54eb9cee69b1eebef462df27f76119bec62 -Author: Felix Riemann -Date: Mon Feb 15 20:49:48 2016 +0100 - - EogScrollView: Implement simple two-pass filtering - - Show the filtered image only after a short time. - This should improve the UI's responsiveness quite a bit. - - https://bugzilla.gnome.org/show_bug.cgi?id=665897 - - src/eog-scroll-view.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++---- - 1 file changed, 62 insertions(+), 4 deletions(-) - -commit cfc04c7195683d038c069b24c666a30c7853cb42 -Author: Mario Blättermann -Date: Mon Feb 15 20:18:40 2016 +0100 - - Updated German translation - - po/de.po | 33 ++++++++++++++++++--------------- - 1 file changed, 18 insertions(+), 15 deletions(-) - -commit dfc5f0b12685f6cff2a53ef523fb2cc2f0c0fd95 -Author: Richard Hughes -Date: Mon Feb 15 15:20:38 2016 +0000 - - data: Add missing information to the AppData file - - It now should not display as 'non-free' when viewed with GNOME Software. - - data/eog.appdata.xml.in | 20 ++++++++++++++------ - 1 file changed, 14 insertions(+), 6 deletions(-) - -commit c1ac983bf3bdbd7d8ab4ab34208f1f399bdacbfc -Author: Felix Riemann -Date: Sun Feb 14 18:50:43 2016 +0100 - - EogPrintPreview: Fix possible integer overflow - - This removes code copied from GDK that was susceptiple to a possible - integer overflow (cf. CVE-2013-7447), although the code only worked - on images too small to trigger the overflow. GDK provides a (fixed) - variant of the code with the same features nowadays, so just use that. - - https://bugzilla.gnome.org/show_bug.cgi?id=762028 - - src/eog-print-preview.c | 96 ++----------------------------------------------- - 1 file changed, 3 insertions(+), 93 deletions(-) - -commit fbc11280c6929852100de40e2dc70f5ec2adcea7 -Author: Russell Haley -Date: Sat Feb 13 18:59:17 2016 -0600 - - EogScrollView: Use better downscaling filter to fix Bug 665897 - - Replace all instances of CAIRO_FILTER_BILINEAR with CAIRO_FILTER_GOOD. - This produces much less aliasing on downscaled images. CAIRO_FILTER_GOOD - uses the same method as CAIRO_FILTER_BILINEAR for scale factors greater - than 0.75, according to https://bugs.webkit.org/show_bug.cgi?id=147826. - - Comparison screenshots made with eog 3.18.1: http://imgur.com/a/NaoOs - - CAIRO_FILTER_BEST is better still, but the the visual difference is - almost imperceptible and the performance impact is severe. - - https://bugzilla.gnome.org/show_bug.cgi?id=665897 - - src/eog-scroll-view.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit 64376d1d2042a92ca5b3312d6950086c2f6a75bd -Author: Alexandre Franke -Date: Thu Feb 11 22:46:35 2016 +0000 - - Updated French translation - - po/fr.po | 463 +++++++++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 299 insertions(+), 164 deletions(-) - -commit 973a59f4b85ec8de1cd34b9ac8c41b7487da7036 -Author: Alexandre Franke -Date: Thu Feb 11 23:43:54 2016 +0100 - - Unify non-use of hyphens - - data/help-overlay.ui | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 6e437f4e9e7b309faf1b2ec328ce68ad70c0861c -Author: Rafael Fontenelle -Date: Wed Feb 10 17:25:58 2016 +0000 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 89 ++++++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 62 insertions(+), 27 deletions(-) - -commit 04b3480324057df4e8f36b2a31754e344b3b8de0 -Author: Chao-Hsiung Liao -Date: Tue Feb 9 10:32:53 2016 +0000 - - Updated Chinese (Taiwan) translation - - po/zh_TW.po | 755 +++++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 492 insertions(+), 263 deletions(-) - -commit b5696d3dd3062fabcfad2573e1d9903567b1205b -Author: Baurzhan Muftakhidinov -Date: Tue Feb 9 04:52:20 2016 +0000 - - Updated Kazakh translation - - po/kk.po | 55 +++++++++++++++++++++++++++++++++++++++++++++++-------- - 1 file changed, 47 insertions(+), 8 deletions(-) - -commit 62566b65dca0a4bf64359ae6993f47ddf874f070 -Author: Balázs Meskó -Date: Sun Feb 7 14:31:09 2016 +0000 - - Updated Hungarian translation - - po/hu.po | 49 ++++++++++++++++++++++++++++++++++++++++++------- - 1 file changed, 42 insertions(+), 7 deletions(-) - -commit 3bf6717df3265dd70fc427528a7fa1fa0847dfca -Author: Daniel Mustieles -Date: Sun Feb 7 13:11:24 2016 +0100 - - Updated Spanish translation - - po/es.po | 80 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------ - 1 file changed, 73 insertions(+), 7 deletions(-) - -commit dd1c5bbe5e4e0d92cb9c92ba3def0e5935ac8d55 -Author: Alexander Shopov -Date: Sat Feb 6 21:44:42 2016 +0200 - - Updated Bulgarian translation - - po/bg.po | 527 ++++++++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 354 insertions(+), 173 deletions(-) - -commit cf5359f546665e01728b29507d22230d5064bb3d -Author: Piotr Drąg -Date: Sat Feb 6 17:36:44 2016 +0100 - - Updated Polish translation - - po/pl.po | 412 +++++++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 283 insertions(+), 129 deletions(-) - -commit f27018896886992a035cf89dcb415347546bbef6 -Author: Rūdolfs Mazurs -Date: Sat Feb 6 16:30:38 2016 +0200 - - Update Latvian translation - - po/lv.po | 430 +++++++++++++++++++++++++++++++++++++++++++++------------------ - 1 file changed, 306 insertions(+), 124 deletions(-) - -commit 2aeab5e5152d0ae432ccfc7c2c66396c8fdb2c1d -Author: Tom Tryfonidis -Date: Sat Feb 6 11:40:21 2016 +0000 - - Updated Greek translation - - po/el.po | 169 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-------- - 1 file changed, 149 insertions(+), 20 deletions(-) - -commit fdc96d91bf9319b715aa8bc194607ff1375c17f0 -Author: Dušan Kazik -Date: Sat Feb 6 09:10:03 2016 +0000 - - Updated Slovak translation - - po/sk.po | 58 +++++++++++++++++++++++++++++++++++++++++++++++++--------- - 1 file changed, 49 insertions(+), 9 deletions(-) - -commit 205fd857b6e5c4808e72fcbcce4d8a32ec81cf69 -Author: Mario Blättermann -Date: Tue Feb 2 19:50:43 2016 +0100 - - Updated German translation - - po/de.po | 43 +++++++++++++++++++++++++++++++++++++++---- - 1 file changed, 39 insertions(+), 4 deletions(-) - -commit 8e0bb0c85fe932d241a01e67f0de5881b2a22f92 -Author: Piotr Drąg -Date: Mon Feb 1 18:17:07 2016 +0100 - - Add context to strings in the shortcut window - - It helps translators by differentiating the help strings from other strings - in the app that might be identical, and allowing to translate them - accordingly. - - https://bugzilla.gnome.org/show_bug.cgi?id=761408 - - data/help-overlay.ui | 72 ++++++++++++++++++++++++++-------------------------- - 1 file changed, 36 insertions(+), 36 deletions(-) - -commit bb1a598d0ebac3186381e6fec252c71612859f19 -Author: Mario Blättermann -Date: Mon Feb 1 19:54:56 2016 +0100 - - Updated German translation - - po/de.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit 156560596414dff7290911abe810160cb2b2e35a -Author: Piotr Drąg -Date: Mon Feb 1 18:15:36 2016 +0100 - - Remove trailing spaces in a shortcut window's string - - data/help-overlay.ui | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit cd24e875c909cb8ef0817d09d47aa26d538afb5f -Author: Richard Hughes -Date: Mon Jan 25 15:37:27 2016 +0000 - - Add a missing tag to the AppData file - - data/eog.appdata.xml.in | 1 + - 1 file changed, 1 insertion(+) - -commit 2d483f418e6c3edcc9ebb4201f19f2790d4948d9 -Author: Rafael Fontenelle -Date: Mon Jan 25 14:22:38 2016 +0000 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 18 +++++++++++------- - 1 file changed, 11 insertions(+), 7 deletions(-) - -commit c4d1b95d179b87dc0bdb8f977b8121203235a565 -Author: Richard Hughes -Date: Mon Jan 25 13:09:50 2016 +0000 - - Add a missing tag to the AppData file - - data/eog.appdata.xml.in | 1 + - 1 file changed, 1 insertion(+) - -commit 4372b57896be29b0ef53f0c820a336ee3d98cb05 -Author: Balázs Meskó -Date: Mon Jan 25 12:08:21 2016 +0000 - - Updated Hungarian translation - - po/hu.po | 430 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 262 insertions(+), 168 deletions(-) - -commit cfeda3006ce46bbdf292ca8ce52ae043a0157d9c -Author: Jiri Grönroos -Date: Wed Jan 20 22:27:50 2016 +0000 - - Updated Finnish translation - - po/fi.po | 53 ++++++++++++----------------------------------------- - 1 file changed, 12 insertions(+), 41 deletions(-) - -commit 13576e9e0f6e8f05a85cd9d09c33dc73747e247f -Author: Felix Riemann -Date: Wed Jan 20 20:53:38 2016 +0100 - - AppData: Add more kudos - - eog qualifies for AppMenu and HighContras as well. - - data/eog.appdata.xml.in | 2 ++ - 1 file changed, 2 insertions(+) - -commit 00c026bcb02af494867cf4cd16920c5a83020567 -Author: David King -Date: Tue Jan 19 10:41:46 2016 +0000 - - Fix Finnish help translation - - help/fi/fi.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 5ed5adef2fdbeafa8b46c2d210a1a22aa0b91ec0 -Author: Felix Riemann -Date: Mon Jan 18 21:14:27 2016 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 6ec83ee1285ee69dfe1cf228b4533e03f92ad89d -Author: Felix Riemann -Date: Mon Jan 18 21:11:43 2016 +0100 - - Prepare for release 3.19.4 - - NEWS | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - -commit f7a199cab53ea1007473b2936e0084eaf2ea4cc0 -Author: Felix Riemann -Date: Mon Jan 18 20:45:52 2016 +0100 - - appdata: Add kudos - - data/eog.appdata.xml.in | 5 +++++ - 1 file changed, 5 insertions(+) - -commit 4947823f00b42c17a00b9207f17f7cea5e18f429 -Author: Aurimas Černius -Date: Sun Jan 17 21:20:58 2016 +0200 - - Updated Lithuanian translation - - po/lt.po | 50 +++++++++++++++++++++++++++----------------------- - 1 file changed, 27 insertions(+), 23 deletions(-) - -commit 3ff094328d39c1b05cbc006625c6cc5542f1abee -Author: Jiro Matsuzawa -Date: Sat Jan 16 03:29:27 2016 +0000 - - Updated Japanese translation - - po/ja.po | 414 ++++++++++++++++++++++++++++++++++++++++++++++++--------------- - 1 file changed, 319 insertions(+), 95 deletions(-) - -commit 7e9a3906cc8891e74640425fd2745b65d891cfed -Author: Yosef Or Boczko -Date: Fri Jan 15 14:07:31 2016 +0200 - - Updated Hebrew translation - - po/he.po | 185 +++++++++++++++++++++++++++++++++++++++++++++++---------------- - 1 file changed, 138 insertions(+), 47 deletions(-) - -commit df3cf6341fc3dbb73e012519e3ab57a370d590fe -Author: Kjartan Maraas -Date: Sun Jan 10 12:53:26 2016 +0100 - - Updated Norwegian bokmål translation. - - po/nb.po | 148 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++------ - 1 file changed, 136 insertions(+), 12 deletions(-) - -commit 1c4e8310513cfaad0ece9b242206817868141662 -Author: Daniel Mustieles -Date: Thu Jan 7 23:08:06 2016 +0100 - - Updated Spanish translation - - po/es.po | 47 +++++++++++------------------------------------ - 1 file changed, 11 insertions(+), 36 deletions(-) - -commit 5ef998236380bf7eaf19a2ce88daacc73aac0856 -Author: Jiri Grönroos -Date: Wed Jan 6 11:49:40 2016 +0000 - - Updated Finnish translation - - po/fi.po | 218 ++++++++++++++++++++++++++++++++++++++++++++++++++------------- - 1 file changed, 174 insertions(+), 44 deletions(-) - -commit 07bc468508b0d2d463991fd1f94160dd9712bd68 -Author: Marek Černocký -Date: Mon Jan 4 13:08:37 2016 +0100 - - Updated Czech translation - - po/cs.po | 18 +++++++++++------- - 1 file changed, 11 insertions(+), 7 deletions(-) - -commit 1b694c16d9519d0fef93ba71f1a16e56d8c4f804 -Author: Mario Blättermann -Date: Sun Jan 3 23:36:11 2016 +0100 - - Updated German translation - - po/de.po | 18 +++++++++++------- - 1 file changed, 11 insertions(+), 7 deletions(-) - -commit a1c2b3f682177c9932e64dd78b8af67a0d409571 -Author: Felix Riemann -Date: Sun Jan 3 14:39:25 2016 +0100 - - appmenu: Add entry to open the help overlay - - data/eog-app-menu.xml | 4 ++++ - 1 file changed, 4 insertions(+) - -commit 931e0f818c6d0cd918f47df777a23d62d2fd2420 -Author: Felix Riemann -Date: Sat Jan 2 19:05:48 2016 +0100 - - EogApplication: Have the app menu automatically loaded by GtkApplication - - src/eog-application.c | 18 ------------------ - src/eog.gresource.xml | 2 +- - 2 files changed, 1 insertion(+), 19 deletions(-) - -commit 30cbdad2b8e5dacfa425a3eb5d90d2666576e69e -Author: Rafael Fontenelle -Date: Sat Jan 2 06:24:56 2016 +0000 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 409 +++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 251 insertions(+), 158 deletions(-) - -commit bab5b71d04b6e11da827522df6a9ba94dc03f8c3 -Author: Mario Blättermann -Date: Tue Dec 29 14:53:09 2015 +0100 - - Updated German translation - - po/de.po | 412 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 251 insertions(+), 161 deletions(-) - -commit 11e6875dfaa4b1676b67b6b083a73e311daab15d -Author: Tom Tryfonidis -Date: Tue Dec 29 11:35:41 2015 +0000 - - Updated Greek translation - - po/el.po | 599 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 351 insertions(+), 248 deletions(-) - -commit 97cac464a0b46f2e6fc7796b7bdc3375f911ea68 -Author: Marek Černocký -Date: Thu Dec 24 13:43:25 2015 +0100 - - Updated Czech translation - - po/cs.po | 138 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----- - 1 file changed, 129 insertions(+), 9 deletions(-) - -commit 4c97e4dd170a91c8a7c76a0b08dfbe7ff790a95f -Author: Aurimas Černius -Date: Sun Dec 20 15:19:03 2015 +0200 - - Updated Lithuanian translation - - po/lt.po | 138 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----- - 1 file changed, 129 insertions(+), 9 deletions(-) - -commit c1d1d18a41c65566cd7ce8a76d5beb1177d11e65 -Author: Dušan Kazik -Date: Tue Dec 15 13:41:05 2015 +0000 - - Updated Slovak translation - - po/sk.po | 172 +++++++++++++++++++++++++++++++++++++++++++++++---------------- - 1 file changed, 129 insertions(+), 43 deletions(-) - -commit 6b10cd558965cb786ea7cdb2745c4fab850e1b43 -Author: Felix Riemann -Date: Mon Dec 14 21:19:19 2015 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c82af8703fd1c3b58cc707ae5214f9d23103c44a -Author: Felix Riemann -Date: Mon Dec 14 21:09:39 2015 +0100 - - Prepare for release 3.19.3 - - NEWS | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - -commit 797da4890311d57024d3216cd90b468986b798cb -Author: Daniel Mustieles -Date: Mon Dec 14 15:15:05 2015 +0000 - - Updated Spanish translation - - po/es.po | 204 +++++++++++++++++++++++++++++++++++++++++++++++++-------------- - 1 file changed, 159 insertions(+), 45 deletions(-) - -commit 6be63e3cfe5145d0b8ee77d24a120d3bd53e9c6d -Author: Baurzhan Muftakhidinov -Date: Mon Dec 14 03:57:48 2015 +0000 - - Updated Kazakh translation - - po/kk.po | 407 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 249 insertions(+), 158 deletions(-) - -commit d699ab1510b5df5e752983af12eac7a8bee97b0b -Author: Pedro Albuquerque -Date: Sun Dec 13 08:35:08 2015 +0000 - - Updated Portuguese translation - - po/pt.po | 204 +++++++++++++++++++++++++++++++++++++++++++++++++-------------- - 1 file changed, 159 insertions(+), 45 deletions(-) - -commit 0f2ae50a53c4ed6e1add01dd8bfcfb97e43b3e44 -Author: Felix Riemann -Date: Sat Dec 12 19:21:11 2015 +0100 - - EogApplication: Add shortcuts window - - Use GtkApplication's automatic shortcut window support - via GtkBuilder. - - https://bugzilla.gnome.org/show_bug.cgi?id=757827 - - configure.ac | 4 +- - data/Makefile.am | 1 + - data/help-overlay.ui | 262 ++++++++++++++++++++++++++++++++++++++++++++++++++ - po/POTFILES.in | 1 + - src/eog-application.c | 1 + - src/eog.gresource.xml | 3 + - 6 files changed, 270 insertions(+), 2 deletions(-) - -commit 94772fa9ce438c4fb64abd1a69bccdf5d49d135f -Author: Sebastian Rasmussen -Date: Fri Dec 11 07:09:47 2015 +0000 - - Updated Swedish translation - - po/sv.po | 441 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 227 insertions(+), 214 deletions(-) - -commit 3d12445c85b1049a2dc7f933341312d5df7794b1 -Author: Felix Riemann -Date: Mon Dec 7 20:53:58 2015 +0100 - - Remove unneeded GTK_CHECK_VERSION macros - - eog requires a newer gtk+ version now. - - src/eog-scroll-view.c | 2 -- - src/eog-thumb-nav.c | 3 +-- - 2 files changed, 1 insertion(+), 4 deletions(-) - -commit 84726b96d8c25ddd314cf36fcb0f221548df5a43 -Author: Felix Riemann -Date: Mon Dec 7 20:50:01 2015 +0100 - - Raise gtk+ dependency to 3.19.2 - - Required for CSS nodes - - https://bugzilla.gnome.org/show_bug.cgi?id=758763 - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a9412e31a274cfd4ff110826fa8f8e493f24accd -Author: Trinh Anh Ngoc -Date: Sat Nov 28 14:21:00 2015 +0700 - - Convert custom theming to use the new CSS nodes - - https://bugzilla.gnome.org/show_bug.cgi?id=758763 - - data/eog.css | 25 ++++++++----------------- - src/eog-thumb-nav.c | 1 + - 2 files changed, 9 insertions(+), 17 deletions(-) - -commit 8f9fae7ac7d7ec636e9ee664591ab986345566f6 -Author: Dušan Kazik -Date: Sun Dec 6 12:46:58 2015 +0000 - - Updated Slovak translation - - po/sk.po | 292 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 147 insertions(+), 145 deletions(-) - -commit 8f23dd921604296c1aa5f61456f95eb16e0bf45e -Author: Jiro Matsuzawa -Date: Sun Dec 6 13:24:25 2015 +0900 - - Updated Japanese translation - - po/ja.po | 241 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 121 insertions(+), 120 deletions(-) - -commit 23fdc13ba2a6ee9a6cc0c4a0bf12bc0977ab1db2 -Author: Pedro Albuquerque -Date: Sat Nov 28 11:42:03 2015 +0000 - - Updated Portuguese translation - - po/pt.po | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -commit f1bbdb127902b61c5812c644048a33f600323977 -Author: Felix Riemann -Date: Mon Nov 23 21:03:45 2015 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0bb102cff1e71347a17bb8add44b4e42ffd27238 -Author: Felix Riemann -Date: Mon Nov 23 21:01:53 2015 +0100 - - Prepare for release 3.19.2 - - NEWS | 22 ++++++++++++++++++++++ - 1 file changed, 22 insertions(+) - -commit 57b2da80ad262ea60842272642bdf9994f1812c0 -Author: Aurimas Černius -Date: Fri Nov 20 21:33:59 2015 +0200 - - Updated Lithuanian translation - - po/lt.po | 238 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 119 insertions(+), 119 deletions(-) - -commit 02c5f98a1c0e63c514652db3a83ff61fb0ae36f2 -Author: Yosef Or Boczko -Date: Thu Nov 19 22:01:40 2015 +0200 - - Updated Hebrew transaltion - - po/he.po | 263 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 132 insertions(+), 131 deletions(-) - -commit 2cc1671b7cccf3ca7f5c6fb43bf1f5a91c54cc28 -Author: Daniel Mustieles -Date: Tue Nov 17 18:43:49 2015 +0100 - - Updated Spanish translation - - po/es.po | 3709 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 1856 insertions(+), 1853 deletions(-) - -commit 01fd910d899f13d7d751df890c43dcf750ad7c88 -Author: GNOME Translation Robot -Date: Mon Nov 16 15:38:50 2015 +0000 - - Updated Scottish Gaelic translation - - po/gd.po | 1341 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 675 insertions(+), 666 deletions(-) - -commit b734988bedfba2f9f7de1da00adbb4083654f2a3 -Author: Kjartan Maraas -Date: Mon Nov 16 07:09:46 2015 +0100 - - Updated Norwegian bokmål translation. - - po/nb.po | 229 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 112 insertions(+), 117 deletions(-) - -commit e06eaa0c3cf5a5ad8eddddbe7f0198ac52fa4260 -Author: YunQiang Su -Date: Sat Nov 14 22:16:28 2015 +0800 - - Us ... instead of … for zh_CN - - po/zh_CN.po | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 8362d7537e1a59e060770a389256d853bed7ec87 -Author: liushuyu -Date: Sat Nov 14 15:15:43 2015 +0800 - - update zh_CN translation - - po/zh_CN.po | 203 +++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 117 insertions(+), 86 deletions(-) - -commit 774418ef33bad663fd9699fd33e30fdcbb15f135 -Author: Kalev Lember -Date: Tue Nov 10 12:04:44 2015 +0100 - - Fix a syntax error in desktop file keywords Romanian translation - - po/ro.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8d7032d5f106a0ec1e7b7693d3aedcd49480ede0 -Author: Marek Černocký -Date: Mon Nov 9 14:48:23 2015 +0100 - - Updated Czech translation - - po/cs.po | 38 +++++++++++++++++++------------------- - 1 file changed, 19 insertions(+), 19 deletions(-) - -commit 001513e63c018db9337be7fd10f44ed4b36202ba -Author: Jiri Grönroos -Date: Sat Nov 7 13:20:30 2015 +0000 - - Updated Finnish translation - - po/fi.po | 252 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 127 insertions(+), 125 deletions(-) - -commit f06f0e6cc615ab6b5567d0f2112f7938f50c70ac -Author: Pedro Albuquerque -Date: Thu Nov 5 06:50:39 2015 +0000 - - Updated Portuguese translation - - po/pt.po | 270 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 136 insertions(+), 134 deletions(-) - -commit 3c18da911895b67c67fa0479072cb06296eebc30 -Author: Trinh Anh Ngoc -Date: Tue Oct 27 15:19:20 2015 +0700 - - Move window actions to gear menu - - data/eog-app-menu.xml | 14 -------------- - data/eog-gear-menu.ui | 8 ++++++++ - 2 files changed, 8 insertions(+), 14 deletions(-) - -commit c2b0edebe2f19e9d7d2dbf4c445e9745ab3d2c80 -Author: Trinh Anh Ngoc -Date: Tue Oct 27 14:58:55 2015 +0700 - - Tweak gallery ui - - data/eog.css | 24 ++++++++++++++++++++++++ - src/eog-thumb-nav.c | 23 +++++++---------------- - src/eog-window.c | 2 +- - 3 files changed, 32 insertions(+), 17 deletions(-) - -commit d0d42990888d282d5a322ab42b23c1c541d62499 -Author: Trinh Anh Ngoc -Date: Tue Oct 27 13:52:23 2015 +0700 - - Tweak statusbar ui - - data/eog.css | 4 ++++ - src/eog-statusbar.c | 18 +++++------------- - 2 files changed, 9 insertions(+), 13 deletions(-) - -commit 577403b1aabcef05108390d160ce934368cd236d -Author: Trinh Anh Ngoc -Date: Tue Oct 27 12:09:59 2015 +0700 - - Tweak sidebar ui - - data/metadata-sidebar.ui | 3 +++ - src/eog-metadata-sidebar.c | 1 - - src/eog-sidebar.c | 7 +++++-- - 3 files changed, 8 insertions(+), 3 deletions(-) - -commit 1d37f4e9fc6803f5cae647beffd2d6882fb88545 -Author: Felix Riemann -Date: Mon Oct 26 21:43:39 2015 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c90aa969d70b25491a790ee351003cf52900e19e -Author: Felix Riemann -Date: Mon Oct 26 21:40:16 2015 +0100 - - Prepare for release 3.19.1 - - NEWS | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - -commit 5e7bc6c3331e46247c954e077ff237be642df83e -Author: Felix Riemann -Date: Wed Oct 21 21:12:16 2015 +0200 - - Post-branch version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit bb39a7567a13642614ed45c4ba5dbc33ff40f720 -Author: Daniel Șerbănescu -Date: Sun Oct 25 15:38:55 2015 +0100 - - Updated Romanian Translation - - po/ro.po | 1908 ++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 1048 insertions(+), 860 deletions(-) - -commit 3f0f6360bdd59bd4cc3514e9b07cf971b0560262 -Author: Marek Černocký -Date: Sat Oct 24 22:33:22 2015 +0200 - - Updated Czech translation - - po/cs.po | 189 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 92 insertions(+), 97 deletions(-) - -commit f8308117498e0a927c457d9f23b5a0484dda3eb9 -Author: Trinh Anh Ngoc -Date: Sun Sep 6 09:50:06 2015 +0700 - - Use headerbar in properties dialog - - data/eog-image-properties-dialog.ui | 79 +++++++++++-------------------------- - src/eog-properties-dialog.c | 10 +---- - 2 files changed, 25 insertions(+), 64 deletions(-) - -commit 7da26f5333a074f61ed8b7adb884ad41c70ff0c1 -Author: Trinh Anh Ngoc -Date: Sun Sep 6 08:58:11 2015 +0700 - - Use headerbar in preferences dialog - - data/eog-preferences-dialog.ui | 83 +++++++++++------------------------------- - src/eog-preferences-dialog.c | 1 + - 2 files changed, 23 insertions(+), 61 deletions(-) - -commit 2c5e528a948afd811f3a15936ae746032c1ea892 -Author: Lars Uebernickel -Date: Tue Sep 29 18:25:08 2015 +0200 - - Put "Exit Fullscreen" button into toolbar - - So that the button has the same background as the toolbar itself. - - https://bugzilla.gnome.org/show_bug.cgi?id=755799 - - data/fullscreen-toolbar.ui | 18 +++++++++++++++++- - src/eog-window.c | 31 +++++-------------------------- - 2 files changed, 22 insertions(+), 27 deletions(-) - -commit 6c8285c58cabefec57784af407d1db2e542fc1af -Author: Felix Riemann -Date: Sun Oct 11 16:23:04 2015 +0200 - - EogScrollView: Allow triggering popup menu via Shift+F10 - - https://bugzilla.gnome.org/show_bug.cgi?id=754985 - - src/eog-scroll-view.c | 24 +++++++++++++++++------- - 1 file changed, 17 insertions(+), 7 deletions(-) - -commit 25602162f7332f903f6d3b2f7b57ced5e064fd0e -Author: Felix Riemann -Date: Sun Oct 11 15:58:56 2015 +0200 - - EogWindow: Add F10 keyboard shortcut for gear menu - - https://bugzilla.gnome.org/show_bug.cgi?id=754985 - - src/eog-application.c | 1 + - src/eog-window.c | 5 +++++ - 2 files changed, 6 insertions(+) - -commit f0d40b4c7bb6dd7ef40cc5e0c02dd8a11c1a3277 -Author: Pedro Albuquerque -Date: Thu Oct 15 05:50:15 2015 +0000 - - Updated Portuguese translation - - po/pt.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 65498bbafcd619777be5430fddd50903ce347937 -Author: Inaki Larranaga Murgoitio -Date: Wed Oct 14 10:39:10 2015 +0200 - - Updated Basque language - - po/eu.po | 181 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 104 insertions(+), 77 deletions(-) - -commit cf429103e1544c8c9de17110a29e1a7e7734dfba -Author: Felix Riemann -Date: Tue Sep 29 16:33:42 2015 +0200 - - reload: Only offer reload option if there's something to reload - - https://bugzilla.gnome.org/show_bug.cgi?id=755244 - - plugins/reload/eog-reload-plugin.c | 40 ++++++++++++++++++++++++++++++++++++++ - 1 file changed, 40 insertions(+) - -commit 2a1db34f611768f245aacc785e09b22fca6bfc93 -Author: Felix Riemann -Date: Mon Sep 28 15:03:43 2015 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c7f6784953636bac6eac8204ec3d3e1edbd1a660 -Author: Felix Riemann -Date: Mon Sep 28 14:54:52 2015 +0200 - - Prepare for release 3.18.0 - - NEWS | 13 +++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 15 insertions(+), 2 deletions(-) - -commit c5c6be66c9bd85f437db9ca40be9f4f6d3f3d8ff -Author: Trần Ngọc Quân -Date: Fri Sep 25 14:53:06 2015 +0700 - - Updated Vietnamese translation - - Signed-off-by: Trần Ngọc Quân - - po/vi.po | 188 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 107 insertions(+), 81 deletions(-) - -commit b73499f1617a20a80456aafffa7e075e8d63df30 -Author: Милош Поповић -Date: Tue Sep 22 11:43:38 2015 +0000 - - Updated Serbian Latin translation - - po/sr@latin.po | 205 +++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 111 insertions(+), 94 deletions(-) - -commit fb70c8d5cc2a0b1486fdfb35e8c2f075e3dbdc88 -Author: Милош Поповић -Date: Tue Sep 22 11:42:58 2015 +0000 - - Updated Serbian translation - - po/sr.po | 205 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 111 insertions(+), 94 deletions(-) - -commit a5e387aca27346a9e98862b75596bbe125fd53ec -Author: Ask Hjorth Larsen -Date: Sun Sep 20 15:04:00 2015 +0000 - - Updated Danish translation - - po/da.po | 224 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 129 insertions(+), 95 deletions(-) - -commit da4afc0f1d1f9a612ec4c4651c447fa02d93b46c -Author: Rūdolfs Mazurs -Date: Fri Sep 18 22:42:13 2015 +0300 - - Updated Latvian translation - - po/lv.po | 187 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 101 insertions(+), 86 deletions(-) - -commit 560fb7f43a2c082353635112d6bc510b489d8fe9 -Author: Khaled Hosny -Date: Fri Sep 18 20:48:15 2015 +0200 - - Update Arabic translation - - po/ar.po | 172 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 100 insertions(+), 72 deletions(-) - -commit 09fc92d2df63c5ef6b0ca8ed2cb348945be0e7fa -Author: Enrico Nicoletto -Date: Tue Sep 15 18:02:21 2015 +0000 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 93 ++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 46 insertions(+), 47 deletions(-) - -commit ffeab6da0c347eb02bec7d52ece33723a9195c99 -Author: Felix Riemann -Date: Mon Sep 14 22:40:02 2015 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 29bfe1076c69d271e7afd0e8e7f549862777c774 -Author: Felix Riemann -Date: Mon Sep 14 22:37:18 2015 +0200 - - Prepare for release 3.17.92 - - NEWS | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - -commit 25ac50d30a1567f9eed03cfc5551313fbf0162a2 -Author: Marek Černocký -Date: Mon Sep 14 12:14:41 2015 +0200 - - Updated Czech translation - - po/cs.po | 88 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 44 insertions(+), 44 deletions(-) - -commit 748f38fa0f0673c7313db1a56f8296b9846cb487 -Author: Jiro Matsuzawa -Date: Mon Sep 14 00:31:08 2015 +0900 - - Updated Japanese translation - - po/ja.po | 166 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 95 insertions(+), 71 deletions(-) - -commit 680cd4a9f8636c7d4ca4a6fae2095b15648dfba7 -Author: Arash Mousavi -Date: Sat Sep 12 22:50:03 2015 +0430 - - Update Persian translations - - po/fa.po | 1433 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 691 insertions(+), 742 deletions(-) - -commit 68a5a0d842d993da6957dee74535ee15c8742394 -Author: Felix Riemann -Date: Fri Sep 11 21:00:19 2015 +0200 - - EogPropertiesDialog: Use standard::display-name when showing the parent - - This simply adapts the changes from commit fff55c6a to the - properties dialog, which shares some code with the EogMetadataSidebar. - - https://bugzilla.gnome.org/show_bug.cgi?id=754731 - - src/eog-properties-dialog.c | 46 +++++++++++++++++++++++++++++++++++++++------ - 1 file changed, 40 insertions(+), 6 deletions(-) - -commit fff55c6afdd1c159c1ec554316fa6170f561cbe1 -Author: Debarshi Ray -Date: Tue Sep 8 18:18:00 2015 +0200 - - EogMetadataSidebar: Use standard::display-name when showing the parent - - https://bugzilla.gnome.org/show_bug.cgi?id=754731 - - src/eog-metadata-sidebar.c | 50 ++++++++++++++++++++++++++++++++++++---------- - 1 file changed, 40 insertions(+), 10 deletions(-) - -commit 3175cec316804c86db3f1c27f788140771ba7a73 -Author: Jiri Grönroos -Date: Thu Sep 10 18:43:10 2015 +0300 - - Finnish translation update - - po/fi.po | 180 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 97 insertions(+), 83 deletions(-) - -commit 3667d632bc614ad889086385d5c41c295179def5 -Author: Gianvito Cavasoli -Date: Wed Sep 9 07:27:42 2015 +0000 - - Updated Italian translation - - po/it.po | 168 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 99 insertions(+), 69 deletions(-) - -commit ec50618fd6c58205843bf8c65f665e073229df53 -Author: Matej Urbančič -Date: Tue Sep 8 23:14:08 2015 +0200 - - Updated Slovenian translation - - po/sl.po | 79 +++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 41 insertions(+), 38 deletions(-) - -commit e78293e3b38e89af08f60ccf2816edad4035a733 -Author: Kjartan Maraas -Date: Mon Sep 7 19:30:54 2015 +0200 - - Updated Norwegian bokmål translation. - - po/nb.po | 84 +++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 43 insertions(+), 41 deletions(-) - -commit e055e5ba1e4e56706db7f6b0e7648eb2d3b1609f -Author: Muhammet Kara -Date: Sun Sep 6 03:50:48 2015 +0000 - - Updated Turkish translation - - po/tr.po | 86 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 43 insertions(+), 43 deletions(-) - -commit 684cd81ba6bcbce06f68aa07ccec921401cd656b -Author: Bernd Homuth -Date: Sat Sep 5 20:27:01 2015 +0000 - - Updated German translation - - po/de.po | 91 +++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 47 insertions(+), 44 deletions(-) - -commit b89e3a791385133c0a406a012a20a367dcf6e862 -Author: Changwoo Ryu -Date: Sun Sep 6 02:11:50 2015 +0900 - - Updated Korean translation - - po/ko.po | 164 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 96 insertions(+), 68 deletions(-) - -commit a58760ef5c772bf0b9770fe42a43b311831a7009 -Author: Baurzhan Muftakhidinov -Date: Fri Sep 4 16:03:40 2015 +0000 - - Updated Kazakh translation - - po/kk.po | 167 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 98 insertions(+), 69 deletions(-) - -commit ad72c0aa41d7d70ff481eff990b49c7058898ed6 -Author: Aurimas Černius -Date: Thu Sep 3 14:42:04 2015 +0300 - - Updated Lithuanian translation - - po/lt.po | 173 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 99 insertions(+), 74 deletions(-) - -commit 0aa2f827502b1fe9cbab85beb28b61571c319bad -Author: Sveinn í Felli -Date: Wed Sep 2 16:27:10 2015 +0000 - - Updated Icelandic translation - - po/is.po | 82 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 41 insertions(+), 41 deletions(-) - -commit 01e053bcb28f2c0efd74a452f87ebd8b115d3eca -Author: Alain Lojewski -Date: Tue Sep 1 07:22:37 2015 +0000 - - Updated French translation - - po/fr.po | 28 ++++++++++++++++++---------- - 1 file changed, 18 insertions(+), 10 deletions(-) - -commit 6cc698945a577220092467327702178e011624d5 -Author: Felix Riemann -Date: Mon Aug 31 22:39:58 2015 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a74888ad8c285c803596d41cf67f052cd9f46507 -Author: Felix Riemann -Date: Mon Aug 31 22:38:18 2015 +0200 - - Prepare for release 3.17.91 - - NEWS | 27 +++++++++++++++++++++++++++ - 1 file changed, 27 insertions(+) - -commit 1b22c52eaa48a4013df176d116b2b3e33a5586d7 -Author: Emmanuel Pacaud -Date: Wed Aug 26 09:02:24 2015 +0200 - - Eog: a bunch of instrospection warning fixes - - Eog introspection seems in a need of a complete review. - - src/eog-image.c | 17 +++++++++++++++++ - src/eog-jobs.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ - src/eog-window.c | 9 +++++++++ - 3 files changed, 75 insertions(+) - -commit 04859efbcde4ae38f9f35818dc586a9088b09cb0 -Author: Emmanuel Pacaud -Date: Wed Aug 26 08:37:11 2015 +0200 - - EogUriConverter: GList leak fix - - A list was created but never freed in eog_uri_converter_check. Fix an - introspection warning in the process. - - src/eog-uri-converter.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - -commit 8e03cd2616f0051328b98a4c646de3ec8c212e96 -Author: Emmanuel Pacaud -Date: Wed Aug 26 02:26:26 2015 +0200 - - EogMetadataDetails: remove deprecated tree rule setting - - As suggested by the GTK documentation, simply remove the call to - gtk_tree_view_set_rules_hint. The metadata tree view is not a good - candidate to the alternate row colors (not wide, not a lot of columns). - - src/eog-metadata-details.c | 2 -- - 1 file changed, 2 deletions(-) - -commit aea640442cfbd198e5dcd0f4155e9c7a248ff702 -Author: Emmanuel Pacaud -Date: Wed Aug 26 02:11:28 2015 +0200 - - EogScrollView: fix override_background deprecated call - - Do the necessary background drawing in draw callback. - - src/eog-scroll-view.c | 32 +++++++++++++++++--------------- - 1 file changed, 17 insertions(+), 15 deletions(-) - -commit b57ed1a0694bcc95c4f33535cf6c627507b09fb9 -Author: Balázs Úr -Date: Mon Aug 31 15:51:04 2015 +0000 - - Updated Hungarian translation - - po/hu.po | 46 +++++++++++++++++++++++----------------------- - 1 file changed, 23 insertions(+), 23 deletions(-) - -commit 05db55c5908935dfb044dd9dd4cae400a4c1de00 -Author: Andika Triwidada -Date: Sun Aug 30 04:39:55 2015 +0000 - - Updated Indonesian translation - - po/id.po | 295 +++++++++++++++++++++++++++++++++++++++++++++------------------ - 1 file changed, 212 insertions(+), 83 deletions(-) - -commit fdbfc18745a88bf1770e1307bc5c3676adb7738b -Author: Tom Tryfonidis -Date: Fri Aug 28 21:00:25 2015 +0000 - - Updated Greek translation - - po/el.po | 205 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 97 insertions(+), 108 deletions(-) - -commit b099142374f277817e1f0c09c9ef743179184be1 -Author: Emmanuel Pacaud -Date: Wed Aug 26 01:17:44 2015 +0200 - - EogScrollView: remove gtk_widget_set_style call - - This function does nothing since the dawn of time (3.0 exactly). - - src/eog-scroll-view.c | 14 -------------- - 1 file changed, 14 deletions(-) - -commit a57e788b7ec85cbb9021bbf152c219be2e254ec0 -Author: Emmanuel Pacaud -Date: Wed Aug 26 01:12:35 2015 +0200 - - EogPropertiesDialog: fix deprecation warnings - - Implementation as suggested in GTK documentation. - - src/eog-properties-dialog.c | 14 ++++++++++---- - 1 file changed, 10 insertions(+), 4 deletions(-) - -commit a48af02cb389d6064947fee7421ba820213429b1 -Author: Emmanuel Pacaud -Date: Wed Aug 26 01:11:04 2015 +0200 - - EogCloseConfirmationDialog: fix deprecation warning - - This function doesn't seem to be used by eog itself, nor the included - plugins. May be a good candidate for code removal, unless it is a plugin - public API. - - src/eog-close-confirmation-dialog.c | 9 +++++---- - 1 file changed, 5 insertions(+), 4 deletions(-) - -commit ef626dc9094d191d55a9cba854380696cadd7627 -Author: Emmanuel Pacaud -Date: Tue Aug 25 23:55:33 2015 +0200 - - EogScrollView: remove commented out code - - That's 8 year old code that doesn't help to understand the scroll view - logic. - - src/eog-scroll-view.c | 681 +------------------------------------------------- - 1 file changed, 1 insertion(+), 680 deletions(-) - -commit a78121c99f4056328351ef7c75c516e2d6ccb865 -Author: Yuri Myasoedov -Date: Fri Aug 28 22:26:22 2015 +0300 - - Updated Russian translation - - po/ru.po | 32 ++++++++++++++++---------------- - 1 file changed, 16 insertions(+), 16 deletions(-) - -commit 2a2a0bfee8821b1760acc917292a4ce8b089d9d4 -Author: Yosef Or Boczko -Date: Fri Aug 28 00:11:58 2015 +0300 - - Updated Hebrew translation - - po/he.po | 42 ++++++++++++++++++++++-------------------- - 1 file changed, 22 insertions(+), 20 deletions(-) - -commit e82f7d8a1129801d943d21d78c69f16f93b93c9a -Author: Anders Jonsson -Date: Thu Aug 27 08:27:01 2015 +0000 - - Updated Swedish translation - - po/sv.po | 152 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 88 insertions(+), 64 deletions(-) - -commit ba756abedb4fdfd3b0e5ad1c3189da191243d0ba -Author: Piotr Drąg -Date: Wed Aug 26 21:38:20 2015 +0200 - - Updated Polish translation - - po/pl.po | 214 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 121 insertions(+), 93 deletions(-) - -commit 9d64e59f1a9e40f2e9c05706ea1c244e0f411225 -Author: Fran Dieguez -Date: Tue Aug 25 15:54:55 2015 +0200 - - Updated Galician translations - - po/gl.po | 159 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 93 insertions(+), 66 deletions(-) - -commit 76d2cda66cfc42af5c9a1ace9a4711d4a785e04f -Author: Chao-Hsiung Liao -Date: Tue Aug 25 13:02:52 2015 +0000 - - Updated Chinese (Taiwan) translation - - po/zh_TW.po | 160 +++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 93 insertions(+), 67 deletions(-) - -commit 5f732d6ec63d0f3fbfa56899ae8c7de3ec113aba -Author: Daniel Mustieles -Date: Tue Aug 25 11:03:09 2015 +0200 - - Updated Spanish translation - - po/es.po | 3736 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 1868 insertions(+), 1868 deletions(-) - -commit 819bfd2640385f2417cb0c98c025cf6d058403d1 -Author: Pedro Albuquerque -Date: Tue Aug 25 05:20:37 2015 +0000 - - Updated Portuguese translation - - po/pt.po | 26 ++++++++++++-------------- - 1 file changed, 12 insertions(+), 14 deletions(-) - -commit 837710f4e95d409afce12932f9951e97ed00ef22 -Author: Dušan Kazik -Date: Mon Aug 24 16:22:43 2015 +0000 - - Updated Slovak translation - - po/sk.po | 17 ++++++++--------- - 1 file changed, 8 insertions(+), 9 deletions(-) - -commit 509a6ad9155d63f097c2a6c7757e2be48c65bd9a -Author: Dušan Kazik -Date: Mon Aug 24 16:21:20 2015 +0000 - - Updated Slovak translation - - po/sk.po | 40 +++++++++++++++++++++------------------- - 1 file changed, 21 insertions(+), 19 deletions(-) - -commit 78976e7b703b53b50c98228f3a1900bdaa8ec994 -Author: Jiro Matsuzawa -Date: Sun Aug 23 22:38:26 2015 +0900 - - Give access key to button "Open with Document Viewer" - - https://bugzilla.gnome.org/show_bug.cgi?id=753987 - - src/eog-error-message-area.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 1ee4fee534d16d18a558a32488f276362167a172 -Author: Alexandre Franke -Date: Mon Aug 24 16:17:30 2015 +0000 - - Updated French translation - - po/fr.po | 146 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 84 insertions(+), 62 deletions(-) - -commit 409be1f8c4b2c8c5718d6ae457c6840087629bee -Author: Felix Riemann -Date: Mon Aug 17 22:38:00 2015 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c27951164672d8f22f4f79b92c82c0b4784b2f7b -Author: Felix Riemann -Date: Mon Aug 17 22:32:51 2015 +0200 - - Prepare for release 3.17.90 - - NEWS | 20 ++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 21 insertions(+), 1 deletion(-) - -commit 456b3664738dac11898e0ee0dea41f4994da1065 -Author: Carlos Garnacho -Date: Fri Aug 14 13:56:00 2015 +0200 - - EogScrollView: Set the event mask bit for touchpad gestures - - This will be enough for the GtkGestureZoom/Rotate gestures to pick - these events and emit the right signals. - - https://bugzilla.gnome.org/show_bug.cgi?id=753627 - - src/eog-scroll-view.c | 3 +++ - 1 file changed, 3 insertions(+) - -commit f9e208350e3f60232186a21b9db52ffadaeef577 -Author: Enrico Nicoletto -Date: Tue Aug 11 02:00:38 2015 +0000 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 191 ++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 110 insertions(+), 81 deletions(-) - -commit c4095b36f925a3a283cd06f5327c2d2fd7343fd3 -Author: Andika Triwidada -Date: Mon Aug 3 07:10:06 2015 +0000 - - Updated Indonesian translation - - po/id.po | 148 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 86 insertions(+), 62 deletions(-) - -commit 1a4b0e8bcb4aba5cca1a5e6aa04babb4cfb026fd -Author: Jordi Mas -Date: Sun Aug 2 23:08:52 2015 +0200 - - Update Catalan translation - - po/ca.po | 152 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 90 insertions(+), 62 deletions(-) - -commit 94578d51c0696f4386407977415f105653f68ed3 -Author: Kjartan Maraas -Date: Thu Jul 30 11:43:07 2015 +0200 - - Updated Norwegian bokmål translation. - - po/nb.po | 156 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 91 insertions(+), 65 deletions(-) - -commit e0ab1384b5eeaf4016956b2de6145eda5e68844e -Author: Anders Jonsson -Date: Mon Jul 27 22:34:19 2015 +0000 - - Updated Swedish translation - - help/sv/sv.po | 4775 +++++++++++++++++++++++++++++++++++++++++++++++---------- - 1 file changed, 4002 insertions(+), 773 deletions(-) - -commit 4ebddb9eca3120924521b43fbe5f5ec572e0257c -Author: Fabio Tomat -Date: Sun Jul 26 18:22:50 2015 +0000 - - Updated Friulian translation - - po/fur.po | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 9bd279a1ac30f29b19eed8a90788fccf8c95bb99 -Author: Fabio Tomat -Date: Sun Jul 26 09:45:23 2015 +0000 - - Updated Friulian translation - - po/fur.po | 1168 ++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 566 insertions(+), 602 deletions(-) - -commit da2b9f3c1c4e648baf2189b491491393d46d833f -Author: Efstathios Iosifidis -Date: Thu Jul 23 09:42:18 2015 +0000 - - Updated Greek translation - - po/el.po | 70 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 35 insertions(+), 35 deletions(-) - -commit d00e421e9f87f004516099c726f1bf5c6c7eaeef -Author: Felix Riemann -Date: Mon Jul 20 22:41:35 2015 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 542fe31f10624c520cc85c70decdfd8ec848931c -Author: Felix Riemann -Date: Mon Jul 20 22:38:06 2015 +0200 - - Prepare for release 3.17.3 - - NEWS | 11 +++++++++++ - 1 file changed, 11 insertions(+) - -commit be2f2a2c1dd7c6c76a7e10a6332c2ba2d7f7b82e -Author: Sveinn í Felli -Date: Thu Jul 16 14:16:30 2015 +0000 - - Updated Icelandic translation - - po/is.po | 184 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 108 insertions(+), 76 deletions(-) - -commit 56eaabd2592918ab147a1641414c9c970d17f4dc -Author: Matej Urbančič -Date: Wed Jul 8 21:56:19 2015 +0200 - - Updated Slovenian translation - - po/sl.po | 155 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 92 insertions(+), 63 deletions(-) - -commit 0e423ff7cc3f1b68f5da6174b30dc73ac211a3cb -Author: Pedro Albuquerque -Date: Sat Jul 4 05:44:03 2015 +0000 - - Updated Portuguese translation - - po/pt.po | 49 +++++++++++++++++-------------------------------- - 1 file changed, 17 insertions(+), 32 deletions(-) - -commit cbb9da83940a95a878663f34ac412df377a3bd19 -Author: Pedro Albuquerque -Date: Mon Jun 29 22:29:21 2015 +0000 - - Updated Portuguese translation - - po/pt.po | 1594 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 800 insertions(+), 794 deletions(-) - -commit b19a229925adabd5be1516e255ffe850027f2e9f -Author: Stas Solovey -Date: Tue Jun 23 21:42:45 2015 +0000 - - Updated Russian translation - - po/ru.po | 183 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 97 insertions(+), 86 deletions(-) - -commit 94ce268960076143d7698a93d3d681563db3c927 -Author: Balázs Úr -Date: Mon Jun 22 20:58:20 2015 +0000 - - Updated Hungarian translation - - po/hu.po | 161 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 95 insertions(+), 66 deletions(-) - -commit 13437eee180bcebcb58b5e1a2e7a46d38fa0c166 -Author: Felix Riemann -Date: Mon Jun 22 22:22:38 2015 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c4f0dfe3e98232bd4e7675e53d9824610b7f0a5b -Author: Felix Riemann -Date: Mon Jun 22 22:15:56 2015 +0200 - - Prepare for release 3.17.2 - - NEWS | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - -commit 53185ff8c8c57e0630964cef30815dd6cf360622 -Author: Felix Riemann -Date: Mon Jun 22 21:52:19 2015 +0200 - - EogWindow: Use symbolic leave-fullscreen icon - - https://bugzilla.gnome.org/show_bug.cgi?id=751021 - - src/eog-window.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit e26c7c489b91a27df60a8d09f98ae2b9c219550c -Author: Alexandre Franke -Date: Fri Jun 19 18:16:31 2015 +0200 - - Remove non-symbolic gallery icon - - It is now useless since we use the symbolic one - - data/icons/16x16/Makefile.am | 1 - - data/icons/16x16/actions/eog-image-gallery.png | Bin 611 -> 0 bytes - data/icons/22x22/Makefile.am | 1 - - data/icons/22x22/actions/eog-image-gallery.png | Bin 653 -> 0 bytes - data/icons/24x24/Makefile.am | 1 - - data/icons/24x24/actions/eog-image-gallery.png | Bin 638 -> 0 bytes - data/icons/32x32/Makefile.am | 2 - - data/icons/32x32/actions/eog-image-gallery.png | Bin 1141 -> 0 bytes - data/icons/scalable/Makefile.am | 1 - - data/icons/scalable/actions/eog-image-gallery.svg | 335 ---------------------- - 10 files changed, 341 deletions(-) - -commit d65a126929978aaed7efb424efa90edae632f49e -Author: Alexandre Franke -Date: Mon Jun 15 23:59:00 2015 +0200 - - Use symbolic icons for fullscreen toolbar - - data/fullscreen-toolbar.ui | 24 ++--- - data/icons/scalable/Makefile.am | 1 + - .../actions/eog-image-gallery-symbolic.svg | 110 +++++++++++++++++++++ - 3 files changed, 123 insertions(+), 12 deletions(-) - -commit 2cb75ec6e88753a0019d7876fbca57b5fb258edf -Author: Felix Riemann -Date: Mon Jun 22 20:29:08 2015 +0200 - - EogWindow: Add stop mark to zoom slider at 100% zoom - - https://bugzilla.gnome.org/show_bug.cgi?id=746132 - - src/eog-window.c | 3 +++ - 1 file changed, 3 insertions(+) - -commit b4b80dbf69de85bfbe6134fb3f667a9d98c084c5 -Author: Felix Riemann -Date: Mon Jun 22 19:51:25 2015 +0200 - - Fix metadata sidebar with libexif disabled - - Otherwise there would be several labels with the text "label". - - https://bugzilla.gnome.org/show_bug.cgi?id=751007 - - src/eog-metadata-sidebar.c | 27 +++++++++++++++++++++------ - 1 file changed, 21 insertions(+), 6 deletions(-) - -commit d45b7f14f7f95796d7e6fe5c2f9e5f223fe67a1a -Author: Felix Riemann -Date: Mon Jun 22 19:42:06 2015 +0200 - - Fix API docs build without libexif - - doc/reference/Makefile.am | 2 -- - 1 file changed, 2 deletions(-) - -commit 36d2cba817e87f71bfce132c3f89358fca40855e -Author: Alexandre Rostovtsev -Date: Tue Jun 16 23:04:32 2015 -0400 - - EogMetadataSidebar: fix --without-libexif build - - https://bugzilla.gnome.org/show_bug.cgi?id=751007 - - src/eog-metadata-sidebar.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit 6e555ab9f4e2b47d605121216aab96713c26f93c -Author: Benjamin Steinwender -Date: Mon Jun 22 17:18:40 2015 +0000 - - Updated German translation - - po/de.po | 162 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 96 insertions(+), 66 deletions(-) - -commit ab514a80c2bdebdfd2a63f2a9667b2ef94327a59 -Author: Alexandre Franke -Date: Fri Jun 19 19:25:37 2015 +0200 - - Update screenshot - - data/screenshot.png | Bin 68590 -> 64013 bytes - 1 file changed, 0 insertions(+), 0 deletions(-) - -commit 3597c6765e1852db8cb556cf4e3f72a157c0ba96 -Author: Muhammet Kara -Date: Tue Jun 9 17:16:41 2015 +0000 - - Updated Turkish translation - - po/tr.po | 177 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 96 insertions(+), 81 deletions(-) - -commit 7bad8a45a1485ebf218bf9c88342854deb44eeab -Author: Dimitris Spingos -Date: Mon Jun 8 10:22:14 2015 +0300 - - Updated Greek translation - - po/el.po | 174 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 102 insertions(+), 72 deletions(-) - -commit 4050afa8380262e72a0bf0951e15b2ece45e5a7c -Author: Dušan Kazik -Date: Sun Jun 7 15:41:34 2015 +0000 - - Updated Slovak translation - - po/sk.po | 161 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 96 insertions(+), 65 deletions(-) - -commit d4a8c5f54111a21d875980980af8983c642a3547 -Author: Piotr Drąg -Date: Sun Jun 7 05:16:41 2015 +0200 - - Fix two more typos in Canadian English translation - - https://bugzilla.gnome.org/show_bug.cgi?id=741438 - - po/en_CA.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit b2b40676a38f9d11cba87aebe3e7b790069a5a08 -Author: Piotr Drąg -Date: Sun Jun 7 05:14:36 2015 +0200 - - Fix typos in Canadian English translation - - https://bugzilla.gnome.org/show_bug.cgi?id=741438 - - po/en_CA.po | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 357a1f1194d98e3e68b00e0e0990f9596e59d764 -Author: Yosef Or Boczko -Date: Thu Jun 4 14:16:07 2015 +0300 - - Updated Hebrew translation - - po/he.po | 152 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 88 insertions(+), 64 deletions(-) - -commit 0d6d130e02d8ecd5034fdd0ebefa8b254c7a67a7 -Author: Marek Černocký -Date: Sun May 31 22:04:39 2015 +0200 - - Updated Czech translation - - po/cs.po | 175 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 95 insertions(+), 80 deletions(-) - -commit c361e30f5bcf966aaaedac3e169f662ea327c762 -Author: Victor Ibragimov -Date: Thu May 28 06:32:19 2015 +0000 - - Updated Tajik translation - - po/tg.po | 174 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 94 insertions(+), 80 deletions(-) - -commit fc8fd5c3b7beb245f2cbca222a97d331bbc5f8db -Author: Daniel Mustieles -Date: Tue May 26 19:21:06 2015 +0200 - - Updated Spanish translation - - po/es.po | 159 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 93 insertions(+), 66 deletions(-) - -commit 05e88d7fd42cc3efcae077e72c52ecae43f06c94 -Author: Felix Riemann -Date: Mon May 25 23:09:25 2015 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 46fe572a97c70a0f1207df10ce7c687726ec416a -Author: Felix Riemann -Date: Mon May 25 22:46:47 2015 +0200 - - Prepare for release 3.17.1 - - NEWS | 22 ++++++++++++++++++++++ - 1 file changed, 22 insertions(+) - -commit 6701d73264c124af316730dfb9eb7dc85270ade9 -Author: Felix Riemann -Date: Mon May 25 22:35:16 2015 +0200 - - Make some documented API appear in the docs - - doc/reference/eog-sections.txt | 3 +++ - 1 file changed, 3 insertions(+) - -commit 5bf0e3581e0b79ae217722f35d17f6021cc09871 -Author: Felix Riemann -Date: Mon May 25 19:12:23 2015 +0200 - - Increase zoom level when toggling the zoom button - - Use the steps the zoom logic used in earlier eog versions. - Also add a zoom level at 133% to not have the zoom jump - to 200% when starting at 100% zoom. - - https://bugzilla.gnome.org/show_bug.cgi?id=746802 - - src/eog-scroll-view.c | 2 +- - src/eog-window.c | 1 + - 2 files changed, 2 insertions(+), 1 deletion(-) - -commit f8c70c212e636b9417f5d8d27ed20e05c2260b77 -Author: Felix Riemann -Date: Mon May 25 18:47:14 2015 +0200 - - Notify user when opening a multipage TIFF - - Show an info bar that tries to steer the user to Evince, if available. - This will work if at least gdk-pixbuf-2.31.1 is used. - - https://bugzilla.gnome.org/show_bug.cgi?id=739654 - - src/eog-error-message-area.c | 115 ++++++++++++++++++++++++++++++++++++++----- - src/eog-error-message-area.h | 6 ++- - src/eog-image.c | 30 +++++++++++ - src/eog-image.h | 2 + - src/eog-window.c | 75 +++++++++++++++++++++++----- - 5 files changed, 203 insertions(+), 25 deletions(-) - -commit 3a7c15a2cb20d7d96cdc364616a3839b9f85704a -Author: Felix Riemann -Date: Mon May 25 12:17:06 2015 +0200 - - EogWindow: Add entry for sidebar into gear menu - - https://bugzilla.gnome.org/show_bug.cgi?id=743477 - - data/eog-gear-menu.ui | 4 ++++ - 1 file changed, 4 insertions(+) - -commit 751ae7ffe82afb69066dca7497d3f4f22836482f -Author: Cédric Valmary -Date: Mon May 25 09:32:36 2015 +0000 - - Updated Occitan translation - - po/oc.po | 3887 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 1981 insertions(+), 1906 deletions(-) - -commit c80dcda164a2fad9f7f66ea8083b795ad26bdb09 -Author: Felix Riemann -Date: Sat May 23 00:42:03 2015 +0200 - - EogWindow: Always show image area and enabled bars - - This might become necessary if the infobars are relayouted. - The collection bar stays hidden since it doesn't have a nice - appearance if empty. - - https://bugzilla.gnome.org/show_bug.cgi?id=538279 - - src/eog-window.c | 56 ++++++++++++++++++++++++++------------------------------ - 1 file changed, 26 insertions(+), 30 deletions(-) - -commit f75e0935336d24c23cb75f74b13734de4210040c -Author: Felix Riemann -Date: Sat May 23 00:32:27 2015 +0200 - - EogWindow: Reuse relayouting code to construct UI layout - - Reduces code duplication. - - src/eog-window.c | 27 ++++++++++++++------------- - 1 file changed, 14 insertions(+), 13 deletions(-) - -commit 40a988301b1f58e74d7f380f0dcdd6828c3b286b -Author: Felix Riemann -Date: Sat May 23 00:13:02 2015 +0200 - - EogThumbView: Don't set deprecated follow-state property - - Since gtk+-3.16 the property is ignored. Silences the deprecation warning. - - src/eog-thumb-view.c | 1 - - 1 file changed, 1 deletion(-) - -commit 054055d37a35c2aa5945b9f33d0f4dcfc865bcd3 -Author: Felix Riemann -Date: Fri May 22 23:29:50 2015 +0200 - - EogWindow: Hide collection if only one image is available - - This restores the collection's pre-3.16 behaviour. - - src/eog-window.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 2549897af7a0cd3111493de5533d0689826d732e -Author: Felix Riemann -Date: Fri May 22 22:45:16 2015 +0200 - - EogMetadataSidebar: Clear folder label if no image is set - - src/eog-metadata-sidebar.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit abe8912634fc05e3b6d09bdd9a98be3bf586357b -Author: Felix Riemann -Date: Sun May 17 17:28:50 2015 +0200 - - EogImage: Make sure to emit size-prepared after applying orientation - - Even if the orientation didn't occur by Exif data. - - https://bugzilla.gnome.org/show_bug.cgi?id=748598 - - src/eog-image.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -commit 5ae0b28eebc18260d01d23481b15bf1201e6ebfd -Author: Felix Riemann -Date: Sun May 17 16:18:00 2015 +0200 - - EogImage: Fix too early size-prepared emission - - If an image without metadata support is loaded it could happen that - the size-prepared signal was emitted without knowing the actual - image size. That resulted in a smaller than necessary window size. - Remove unneeded emission since the loader will make sure to emit the - signal once the size is known. - - https://bugzilla.gnome.org/show_bug.cgi?id=748598 - - src/eog-image.c | 2 -- - 1 file changed, 2 deletions(-) - -commit a9c9d81405e31443ab51713f6a0712f9bb10e11b -Author: Felix Riemann -Date: Sun May 17 16:13:00 2015 +0200 - - Remove workaround for non-threadsafe pixbuf loaders - - gdk-pixbuf requires loaders to be threadsafe since 2.28 and the - workaround shouldn't be needed anymore. That reduces the complexity - of the image loading code. Require gdk-pixbuf 2.30.0 since that version - is required by GTK+ already. - - configure.ac | 2 +- - src/eog-image-private.h | 1 - - src/eog-image.c | 71 +++++-------------------------------------------- - 3 files changed, 7 insertions(+), 67 deletions(-) - -commit 109109f4e12c66ec0a3861eac61a5251c7fb4ff1 -Author: Felix Riemann -Date: Sun May 17 16:25:51 2015 +0200 - - Post-branch version bump - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 033d8f280d057d39682c226dffc9f0e472d132aa -Author: Jordi Mas -Date: Sat May 16 09:01:46 2015 +0200 - - Fixes to Catalan translation - - help/ca/ca.po | 30 +++++++++++++++--------------- - 1 file changed, 15 insertions(+), 15 deletions(-) - -commit a50138be2e2820d59e4c26d08e875edd976420e5 -Author: Felix Riemann -Date: Wed May 13 21:34:07 2015 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit bbd3f92b1be89de56e817a5f089c87f8d31c9c84 -Author: Felix Riemann -Date: Wed May 13 19:25:05 2015 +0200 - - Prepare for release 3.16.2 - - NEWS | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - -commit 1c296e5cc5a6fc52205273a257a10e626d31315c -Author: Dean Chen -Date: Sun May 3 10:46:41 2015 +0800 - - update zh_CN translation - - po/zh_CN.po | 1322 +++++++++++++++++++++++++++++------------------------------ - 1 file changed, 644 insertions(+), 678 deletions(-) - -commit 21f7d6b6145c7eecabe6c95c1f0343dbdb62e80e -Author: Kent Vander Velden -Date: Wed Apr 29 10:31:33 2015 -0500 - - Update progress status bar for all images, valid and invalid. - - The progress status bar (cur / tot) in the lower right was only being updated - when an image was valid, with data. When browsing a directory or otherwise - multiple filenames given to eog, the status bar would only update when visting - valid images. Simply moved update_image_pos(...) outside of the - eog_image_has_data(...) test. - - https://bugzilla.gnome.org/show_bug.cgi?id=748653 - - src/eog-window.c | 47 ++++++++++++++++++++++++----------------------- - 1 file changed, 24 insertions(+), 23 deletions(-) - -commit c20253fc65fa22a0f603e1cff72c0a5d3543dfb1 -Author: Felix Riemann -Date: Wed Apr 29 21:11:50 2015 +0200 - - icon: Install symbolic app icon into the right location - - Make sure the icon installs into the system data dir instead of the - package data dir. Also fix used icon category. - - https://bugzilla.gnome.org/show_bug.cgi?id=746842 - - data/icons/scalable/Makefile.am | 9 ++++++--- - 1 file changed, 6 insertions(+), 3 deletions(-) - -commit 3179f097357e3a171a445ae8430ee8c87aad0bb7 -Author: Jakub Steiner -Date: Thu Mar 26 19:40:03 2015 +0100 - - icon: provide a symbolic variant of the app icon - - https://bugzilla.gnome.org/show_bug.cgi?id=746842 - - data/icons/scalable/Makefile.am | 3 ++- - data/icons/scalable/apps/eog-symbolic.svg | 25 +++++++++++++++++++++++++ - 2 files changed, 27 insertions(+), 1 deletion(-) - -commit c7d2d7240a4d59ed49e1ad5f90a6bfdb7024782e -Author: Cédric Valmary -Date: Tue Apr 28 13:25:26 2015 +0000 - - Updated Occitan translation - - po/oc.po | 3423 ++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 1906 insertions(+), 1517 deletions(-) - -commit 32b4e4942927ca91ff9ed3ede6bc687c95d99b4b -Author: Sveinn í Felli -Date: Mon Apr 27 14:37:04 2015 +0000 - - Updated Icelandic translation - - po/is.po | 163 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 92 insertions(+), 71 deletions(-) - -commit 2d9488125360a2a149ddfa6c9d678487ac6f4f41 -Author: Felix Riemann -Date: Thu Apr 16 23:48:34 2015 +0200 - - EogApplication: Restrore Ctrl+W shortcut for closing windows - - Seems to have gone missing during the GAction migration. - - https://bugzilla.gnome.org/show_bug.cgi?id=747806 - - src/eog-application.c | 1 + - 1 file changed, 1 insertion(+) - -commit d985678fe769e70674bd949b895a0ad00da4ea07 -Author: Felix Riemann -Date: Mon Apr 13 19:56:27 2015 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0e815bd2a685da7eaa2edb6307a9e01942b235e1 -Author: Felix Riemann -Date: Mon Apr 13 19:53:43 2015 +0200 - - Prepare for release 3.16.1 - - NEWS | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - -commit e52a64c4180c2245d1c484aa1b88fa2d5c9803b8 -Author: Felix Riemann -Date: Fri Apr 10 21:44:28 2015 +0200 - - EogWindow: Fix feedback loop from zoom scale to scroll view - - Block signal handler to avoid setting the zoom again when the - scroll view sets the zoom on its own. Although the scroll view - will usually ignore these resets it won't do so if the zoom scale - clamps the zoom factor to its own allowed range. - - https://bugzilla.gnome.org/show_bug.cgi?id=747410 - - src/eog-window.c | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - -commit 5c93a17232207c9d7154f9fb80c6ccb9bf35b18c -Author: Hannie Dumoleyn -Date: Thu Apr 9 10:34:38 2015 +0200 - - Updated Dutch translation 3.16 - - po/nl.po | 687 ++++++++++++++++++++------------------------------------------- - 1 file changed, 220 insertions(+), 467 deletions(-) - -commit a2ba4e3e503adc1eb50c290b15b431e72b88fbf2 -Author: Mattias Põldaru -Date: Wed Apr 8 20:26:54 2015 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 729 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 384 insertions(+), 345 deletions(-) - -commit 0bf4da0ad1997e89e8d9c58f6c926055ec27e543 -Author: Rūdolfs Mazurs -Date: Fri Apr 3 20:55:28 2015 +0300 - - Updated Latvian translation - - po/lv.po | 1204 +++++++++++++++++++++++--------------------------------------- - 1 file changed, 452 insertions(+), 752 deletions(-) - -commit ee33862e7cede4fd2ff34e4cfcb4192dfdd52b46 -Author: Felix Riemann -Date: Thu Mar 26 19:01:05 2015 +0100 - - EogScrollView: Remove unneeded g_assert() - - The code following it is able to handle the situation. - - https://bugzilla.gnome.org/show_bug.cgi?id=735633 - - src/eog-scroll-view.c | 2 -- - 1 file changed, 2 deletions(-) - -commit 396d9524d1d455a24523b89d35f1a01f3955bc60 -Author: Gianvito Cavasoli -Date: Tue Mar 24 10:03:59 2015 +0000 - - Updated Italian translation - - po/it.po | 1150 ++++++++++++++++++++++++-------------------------------------- - 1 file changed, 443 insertions(+), 707 deletions(-) - -commit 01f23c55b9e5ed9f7dd8120ce7f73208e33e661e -Author: Khaled Hosny -Date: Mon Mar 23 22:16:19 2015 +0200 - - Update Arabic translation - - po/ar.po | 1285 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 625 insertions(+), 660 deletions(-) - -commit 633efdf0a254eed4c0180d111d24b62622c08ba7 -Author: Felix Riemann -Date: Mon Mar 23 19:57:47 2015 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0ae3a3b321ecf71beb4f0e73303716eb18a9ced6 -Author: Felix Riemann -Date: Mon Mar 23 19:48:31 2015 +0100 - - Prepare for release 3.16.0 - - NEWS | 14 ++++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 16 insertions(+), 2 deletions(-) - -commit 47545acfd355c7fc06b46d0e72960b1e1125c0ff -Author: Inaki Larranaga Murgoitio -Date: Sat Mar 21 12:21:31 2015 +0100 - - Updated Basque language - - po/eu.po | 388 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 203 insertions(+), 185 deletions(-) - -commit 4153c8a6c7628e2b6cc3dbb7ef062590c7cedf0e -Author: Felix Riemann -Date: Thu Mar 19 21:04:17 2015 +0100 - - EogScrollView: Clear overlay timeout on dispose - - Fixes segfaults when closing one of multiple EogWindows or when - application shutdown is delayed. - - https://bugzilla.gnome.org/show_bug.cgi?id=746336 - - src/eog-scroll-view.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit e3123f6bcb6930acfca3734d2ffea723142c43ce -Author: Andika Triwidada -Date: Wed Mar 18 15:33:03 2015 +0000 - - Updated Indonesian translation - - po/id.po | 1296 ++++++++++++++++++++++---------------------------------------- - 1 file changed, 463 insertions(+), 833 deletions(-) - -commit 476d6030d9f6ddffb118dc71aa4757318d6fa9f4 -Author: Jordi Mas -Date: Wed Mar 18 07:20:33 2015 -0400 - - Update Catalan translation - - po/ca.po | 1291 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 629 insertions(+), 662 deletions(-) - -commit 559fb067fb2541bdf458952fa3fc04eb3b27713c -Author: Daniel Martinez -Date: Tue Mar 17 19:59:39 2015 +0100 - - Update Aragonese translation - - po/an.po | 405 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 208 insertions(+), 197 deletions(-) - -commit 93a1472ec89c897df3e6c9806518011af6bb4943 -Author: Felix Riemann -Date: Mon Mar 16 23:37:57 2015 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit fc74b0114a4b6defd96ac812a7e009020dc88825 -Author: Felix Riemann -Date: Mon Mar 16 23:33:03 2015 +0100 - - Prepare for release 3.15.92 - - NEWS | 37 +++++++++++++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 38 insertions(+), 1 deletion(-) - -commit 76740faf9648ad9f071dadaf8f7e014fcf7d90ef -Author: Felix Riemann -Date: Mon Mar 16 19:53:04 2015 +0100 - - EogScrollView: Hide the overlay buttons faster - - Reduces the motion timeout to one second and uses more precise - timing as the previous timing could drift by nearly a second. - - https://bugzilla.gnome.org/show_bug.cgi?id=746131 - - src/eog-scroll-view.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 861584c3c796ad1deea28e6cb963e2d13776ec60 -Author: Piotr Drąg -Date: Sun Mar 15 23:04:45 2015 +0100 - - Remove Polish help translation - - 4% translated is not worth keeping. - - help/Makefile.am | 2 +- - help/pl/figures/eog_save_as_window.png | Bin 24966 -> 0 bytes - help/pl/figures/eog_start_window.png | Bin 17949 -> 0 bytes - help/pl/figures/eog_toolbar_editor_window.png | Bin 23335 -> 0 bytes - help/pl/pl.po | 987 -------------------------- - 5 files changed, 1 insertion(+), 988 deletions(-) - -commit 4afa1a39cb5073ba48170b8d396c778507a4538e -Author: Felix Riemann -Date: Thu Mar 12 19:26:20 2015 +0100 - - EogSidebar: Increase margin at the sides of the sidebar - - https://bugzilla.gnome.org/show_bug.cgi?id=746105 - - src/eog-sidebar.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit 9438d0bb30b374560e318668b82af3a5fb2bf821 -Author: Ask Hjorth Larsen -Date: Sun Mar 15 16:37:26 2015 +0100 - - Updated Danish translation - - po/da.po | 1300 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 635 insertions(+), 665 deletions(-) - -commit 3791854431b549720d3eea53186ff49b59120e88 -Author: A S Alam -Date: Fri Mar 13 22:55:00 2015 -0500 - - Translation pa updated for Gnome - - po/pa.po | 1298 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 636 insertions(+), 662 deletions(-) - -commit c34bf4e27a4e85a1b5465469797c023214dd8730 -Author: Samir Ribic -Date: Fri Mar 13 15:54:12 2015 +0000 - - Updated Bosnian translation - - po/bs.po | 1731 ++++++++++++++++++++++++++++++++++++++++++++------------------ - 1 file changed, 1237 insertions(+), 494 deletions(-) - -commit 96d12556d519f1a32b2216c9676b31e5b15481c1 -Author: Baurzhan Muftakhidinov -Date: Fri Mar 13 05:52:28 2015 +0000 - - Updated Kazakh translation - - po/kk.po | 50 ++++++++++++++++++++++++++++++++++++++++++-------- - 1 file changed, 42 insertions(+), 8 deletions(-) - -commit 229f49c8f3a54fda9e22fdc11df55e3b4f9c6928 -Author: Felix Riemann -Date: Thu Mar 12 19:25:11 2015 +0100 - - EogScrollView: Make zoom factor defines internal again - - These turned out to not be needed in a global context. - Avoids introspection warnings for these values. - - src/eog-scroll-view.c | 10 ++++++++++ - src/eog-scroll-view.h | 10 ---------- - 2 files changed, 10 insertions(+), 10 deletions(-) - -commit c7e606c5042a59e28e7d054eedf393f012cefdc0 -Author: Felix Riemann -Date: Thu Mar 12 19:24:30 2015 +0100 - - Remove unneeded define from Makefile - - src/Makefile.am | 1 - - 1 file changed, 1 deletion(-) - -commit d97596f1a51d63f69b890b8e203ef73c6c47706b -Author: Victor Ibragimov -Date: Thu Mar 12 05:10:20 2015 +0000 - - Updated Tajik translation - - po/tg.po | 1334 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 657 insertions(+), 677 deletions(-) - -commit aafc70215ecf368a67f1eeeba157be53704c1204 -Author: Alexander Shopov -Date: Wed Mar 11 21:24:48 2015 +0200 - - Updated Bulgarian translation - - po/bg.po | 938 +++++++++++++++++++++++---------------------------------------- - 1 file changed, 347 insertions(+), 591 deletions(-) - -commit a53e76238a556ff2cead82dab6e8b313486577a9 -Author: Jiri Grönroos -Date: Wed Mar 11 16:53:52 2015 +0200 - - Finnish translation update - - po/fi.po | 1117 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 548 insertions(+), 569 deletions(-) - -commit c63781735b3cdb4fc2d63dbf02823884ab0cd11d -Author: Baurzhan Muftakhidinov -Date: Wed Mar 11 12:21:53 2015 +0000 - - Updated Kazakh translation - - po/kk.po | 53 +++++++++++++++++++++++++++++++++++++---------------- - 1 file changed, 37 insertions(+), 16 deletions(-) - -commit d719b73fd5fad0baa9270c70d7facd1fe3ec2e62 -Author: Vadim Rutkovsky -Date: Mon Mar 9 16:28:11 2015 +0100 - - tests: update screenshot tour - - tests/common_steps.py | 2 +- - tests/screenshot_tour.feature | 14 ++++---------- - tests/steps/steps.py | 18 +++++++++--------- - 3 files changed, 14 insertions(+), 20 deletions(-) - -commit 6d97d9dcadede3492417bf9202f26bdb90fb0e59 -Author: Vadim Rutkovsky -Date: Mon Mar 9 16:01:09 2015 +0100 - - tests: fix Fullscreen tests - - Fullscreen button moved to headerbar - Detect fullscreen state by drawing area by position - - tests/actions.feature | 2 +- - tests/steps/steps.py | 11 ++++++----- - 2 files changed, 7 insertions(+), 6 deletions(-) - -commit 0ef2319fb9340b0c7983dfe483ddcfb1178c8ee7 -Author: Vadim Rutkovsky -Date: Mon Mar 9 15:51:10 2015 +0100 - - tests: use GApp menu to toggle side pane - - tests/actions.feature | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 2b7041a7813e8b14bcecaade558f42161ca91f06 -Author: Vadim Rutkovsky -Date: Mon Mar 9 15:48:13 2015 +0100 - - tests: fix 'Rotate the image clockwise' step - - tests/steps/steps.py | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -commit 271dd0167751147901caf55627c52bba7237b9bc -Author: Vadim Rutkovsky -Date: Mon Mar 9 15:33:21 2015 +0100 - - tests: fix image size detection step - - Since eog doesn't provide labellee for table cell we have to - hardcode the size cell number - - tests/steps/steps.py | 15 ++++++++------- - 1 file changed, 8 insertions(+), 7 deletions(-) - -commit 6526c6446ec5f3ff21c4717e3c80a6e289d853c1 -Author: Vadim Rutkovsky -Date: Mon Mar 9 15:06:56 2015 +0100 - - tests: fix About test - - tests/common_steps.py | 20 +++++++++++++++++++- - tests/steps/steps.py | 5 +++-- - 2 files changed, 22 insertions(+), 3 deletions(-) - -commit c3007b5de089c1f7308c8b01b504e9e54ffc72f6 -Author: Matej Urbančič -Date: Sun Mar 8 21:21:58 2015 +0100 - - Updated Slovenian translation - - po/sl.po | 1330 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 650 insertions(+), 680 deletions(-) - -commit b1133665bdb9591ee124ed853590d4fcde99204e -Author: Trần Ngọc Quân -Date: Sun Mar 8 07:25:01 2015 +0700 - - Updated Vietnamese translation - - Signed-off-by: Trần Ngọc Quân - - po/vi.po | 430 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 230 insertions(+), 200 deletions(-) - -commit 589ab5a1f192564fc63da6ed75fa8396811df059 -Author: Jiro Matsuzawa -Date: Sat Mar 7 22:41:31 2015 +0900 - - l10n: Update Japanese translation - - po/ja.po | 1180 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 572 insertions(+), 608 deletions(-) - -commit b57cbb04517caf1d7a68f36f4a2b87745242c7bc -Author: Changwoo Ryu -Date: Thu Mar 5 19:01:30 2015 +0900 - - Updated Korean translation - - po/ko.po | 1164 +++++++++++++++++++++++++------------------------------------- - 1 file changed, 476 insertions(+), 688 deletions(-) - -commit 7829e573cc0555e0308337676ca41b9cbbe9f2fb -Author: Paweł Żołnowski -Date: Wed Mar 4 23:38:50 2015 +0100 - - Updated Polish translation - - po/pl.po | 1134 +++++++++++++++++++++++++------------------------------------- - 1 file changed, 447 insertions(+), 687 deletions(-) - -commit a94b75efb7858d87b9ad8796cff2d10c58cb9b37 -Author: Мирослав Николић -Date: Tue Mar 3 19:01:33 2015 +0100 - - Updated Serbian translation - - po/sr.po | 1317 ++++++++++++++++++++++++++++---------------------------- - po/sr@latin.po | 1317 ++++++++++++++++++++++++++++---------------------------- - 2 files changed, 1294 insertions(+), 1340 deletions(-) - -commit 544f49252156947d75a227c4b87e8ad57286d42b -Author: Fran Dieguez -Date: Tue Mar 3 01:23:12 2015 +0100 - - Updated Galician translations - - po/gl.po | 429 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 229 insertions(+), 200 deletions(-) - -commit 4a39d4cf546cb328b3e1563d2d17c4ecf48ea54b -Author: Baurzhan Muftakhidinov -Date: Sat Feb 28 17:41:36 2015 +0000 - - Updated Kazakh translation - - po/kk.po | 1067 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 512 insertions(+), 555 deletions(-) - -commit 4f081d472514c9f448c69b534438cdf688083f98 -Author: Anders Jonsson -Date: Wed Feb 25 21:06:51 2015 +0000 - - Updated Swedish translation - - po/sv.po | 2231 ++++++++++++++++++-------------------------------------------- - 1 file changed, 655 insertions(+), 1576 deletions(-) - -commit 386e730c91bed8ec11c11cbed45e79802ee595ba -Author: Yosef Or Boczko -Date: Wed Feb 25 00:40:32 2015 +0200 - - Updated Hebrew translation - - po/he.po | 96 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 48 insertions(+), 48 deletions(-) - -commit 0df984ec0c81ac324ec9bf94e0449f4847501374 -Author: Felix Riemann -Date: Tue Feb 24 19:49:43 2015 +0100 - - EogScrollView: Add margin to both sides of the overlaid buttons - - Should avoid clipping the buttons in RTL locales - - https://bugzilla.gnome.org/show_bug.cgi?id=745077 - - src/eog-scroll-view.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit e60998a7fecfd009d47a066fb84db89e370d150c -Author: Aurimas Černius -Date: Mon Feb 23 23:29:06 2015 +0200 - - Updated Lithuanian translation - - po/lt.po | 378 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 213 insertions(+), 165 deletions(-) - -commit 13af4c22dcf69701c3d8931865041b4dbbbaa6c7 -Author: Chao-Hsiung Liao -Date: Mon Feb 23 07:25:50 2015 +0000 - - Updated Chinese (Taiwan) translation - - po/zh_TW.po | 221 ++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 117 insertions(+), 104 deletions(-) - -commit 359014d7de97441c26a6aaad4ee7b4cd582c2506 -Author: Claude Paroz -Date: Sun Feb 22 15:00:28 2015 +0100 - - Updated French translation - - po/fr.po | 1292 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 617 insertions(+), 675 deletions(-) - -commit 95a2acda9614bfbd02771a11848f3bb0fbbbce65 -Author: Chao-Hsiung Liao -Date: Sat Feb 21 10:19:49 2015 +0000 - - Updated Chinese (Taiwan) translation - - po/zh_TW.po | 1301 ++++++++++++++++++++++++++++------------------------------- - 1 file changed, 626 insertions(+), 675 deletions(-) - -commit d7c63bf29154f0f713bb1cff66395255affc96e4 -Author: Wolfgang Stöggl -Date: Sat Feb 21 08:27:49 2015 +0000 - - Updated German translation - - po/de.po | 1312 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 636 insertions(+), 676 deletions(-) - -commit 928d1587ba6e403212ea46823b7b6f678e23292b -Author: Muhammet Kara -Date: Fri Feb 20 13:37:19 2015 +0000 - - Updated Turkish translation - - po/tr.po | 1203 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 591 insertions(+), 612 deletions(-) - -commit 2a2abd94f43f5867e78f495f816f4889624e92fd -Author: Sveinn í Felli -Date: Tue Feb 17 04:31:18 2015 +0000 - - Updated Icelandic translation - - po/is.po | 331 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 162 insertions(+), 169 deletions(-) - -commit 532f6de91ed304344d55040a59486c295dba6c54 -Author: Felix Riemann -Date: Mon Feb 16 22:11:27 2015 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 189e81e9efaf5634e5ec90612d8e19d2500d1786 -Author: Felix Riemann -Date: Mon Feb 16 22:08:43 2015 +0100 - - Prepare for release 3.15.90 - - NEWS | 26 ++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 27 insertions(+), 1 deletion(-) - -commit 9d9f6b0e84a174cc32dc1b7af3226ca9e2d15ba9 -Author: Felix Riemann -Date: Mon Feb 16 21:58:38 2015 +0100 - - EogWindow: Make the zoom button follow the view's mode - - src/eog-window.c | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - -commit 5159ed15a794b0906e23f008fc3c9aede1d84993 -Author: Felix Riemann -Date: Sun Feb 15 17:34:41 2015 +0100 - - EogWindow: Remove GtkUIManager - - Not needed anymore after the GAction port. - - src/eog-window.c | 18 ------------------ - src/eog-window.h | 1 - - 2 files changed, 19 deletions(-) - -commit 144479e35c0cd7654542cca44164f62c8eedc459 -Author: Efstathios Iosifidis -Date: Sat Feb 14 16:59:43 2015 +0200 - - Updated Greek translation - - po/el.po | 431 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 219 insertions(+), 212 deletions(-) - -commit a1be594ab735ad759214bd64203f7701a1940105 -Author: Felix Riemann -Date: Thu Feb 12 20:45:18 2015 +0100 - - reload: Fix typo causing the plugin to remove the wrong menu entries - - plugins/reload/eog-reload-plugin.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -commit d7e0cd7d2b47ea5cb2ce776448d5809da78e3f16 -Author: Kristjan SCHMIDT -Date: Wed Feb 11 22:34:03 2015 +0100 - - Updated Esperanto translation - - po/eo.po | 1497 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 766 insertions(+), 731 deletions(-) - -commit a0ed3fe8f266539b583d0f22accb4408adce22cc -Author: Daniel Korostil -Date: Tue Feb 10 22:56:30 2015 +0200 - - Updated Ukrainian translation - - po/uk.po | 1313 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 643 insertions(+), 670 deletions(-) - -commit 4fb6b450a8dd2fedd6dc7561400f39b608330463 -Author: Yosef Or Boczko -Date: Tue Feb 10 00:01:46 2015 +0200 - - Updated Hebrew translation - - po/he.po | 255 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 133 insertions(+), 122 deletions(-) - -commit 00daaa2677df900a999dc514be10edd2522faeca -Author: Daniel Mustieles -Date: Mon Feb 9 20:11:25 2015 +0100 - - Updated Spanish translation - - po/es.po | 222 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 118 insertions(+), 104 deletions(-) - -commit 4e083c73743640f3bf5923178edd267816957ec9 -Author: Dušan Kazik -Date: Mon Feb 9 18:20:01 2015 +0000 - - Updated Slovak translation - - po/sk.po | 297 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 155 insertions(+), 142 deletions(-) - -commit 15b47994ab66d9f6fb5ea76ea6dc82a478c28335 -Author: Balázs Úr -Date: Sun Feb 8 20:14:16 2015 +0000 - - Updated Hungarian translation - - po/hu.po | 215 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 114 insertions(+), 101 deletions(-) - -commit d49b0858293511793761a947bec604466f6a9751 -Author: Kjartan Maraas -Date: Sun Feb 8 19:43:34 2015 +0100 - - Updated Norwegian bokmål translation from Åka Sikrom. - - po/nb.po | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - -commit 92f5853f379fdf338e199edc185b388777a0e58e -Author: Kjartan Maraas -Date: Sun Feb 8 19:41:26 2015 +0100 - - Updated Norwegian bokmål translation from Åka Sikrom. - - po/nb.po | 1166 +++++++++++++++++++++++++------------------------------------- - 1 file changed, 466 insertions(+), 700 deletions(-) - -commit 182a8d9f48bd8f408571bce0dca880eb70ce13a2 -Author: Felix Riemann -Date: Sun Feb 8 15:21:30 2015 +0100 - - EogWindow: Add proper introspection keywords for gear menu lookup - - Otherwise Python plugins aren't able to add menu entries. - - src/eog-window.c | 7 +++++++ - 1 file changed, 7 insertions(+) - -commit 37bc7f00ffdc23015dcd3d5f70dcde1b79f3c957 -Author: Felix Riemann -Date: Sun Feb 8 13:06:16 2015 +0100 - - Hide statusbar by default - - If everything works out it can be removed in one of the next - releases. - - data/org.gnome.eog.gschema.xml.in | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 10197a531613e84ac0d6675dda95b332c8731280 -Author: Felix Riemann -Date: Sat Feb 7 14:45:08 2015 +0100 - - Remove the external editor settings key - - The external editor button got removed during the UI overhaul. - - data/org.gnome.eog.gschema.xml.in | 21 ++++++++------------- - src/eog-config-keys.h | 1 - - 2 files changed, 8 insertions(+), 14 deletions(-) - -commit bf1c47d376eb86283cffe47d98263e4c82f9b29b -Author: Stas Solovey -Date: Fri Feb 6 12:14:20 2015 +0000 - - Updated Russian translation - - po/ru.po | 167 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 106 insertions(+), 61 deletions(-) - -commit 9313035f467e7dd54f4001facc941cd96c7d2732 -Author: Marek Černocký -Date: Thu Feb 5 13:57:27 2015 +0100 - - Updated Czech translation - - po/cs.po | 150 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 95 insertions(+), 55 deletions(-) - -commit c4eea92745c48d9f4d4e9cacb628c7586412fec4 -Author: Rafael Ferreira -Date: Thu Feb 5 10:02:27 2015 +0000 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 178 ++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 96 insertions(+), 82 deletions(-) - -commit 0522b176ef0b2cd1b27d64378aae4fd0ecf34fa2 -Author: Felix Riemann -Date: Wed Feb 4 21:38:30 2015 +0100 - - EogWindow: Add tooltip to zoom button - - https://bugzilla.gnome.org/show_bug.cgi?id=743887 - - src/eog-window.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -commit 0492b8b90a5752b49ad6852209b8620025f05f4c -Author: Felix Riemann -Date: Wed Feb 4 20:55:27 2015 +0100 - - EogWindow: Restore tooltips in fullscreen toolbar - - Reuse tooltip text from eog-3.14. - - https://bugzilla.gnome.org/show_bug.cgi?id=743887 - - data/fullscreen-toolbar.ui | 12 ++++++++++++ - src/eog-window.c | 5 +++++ - 2 files changed, 17 insertions(+) - -commit 4b1451c8a6f3a708f250eea43533cbb9341c7f01 -Author: Diogo Campos -Date: Wed Feb 4 19:51:58 2015 +0000 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 314 ++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 165 insertions(+), 149 deletions(-) - -commit e7d1acaae02405c569b1d3be815a72182a0217fd -Author: Sveinn í Felli -Date: Wed Feb 4 17:49:25 2015 +0000 - - Updated Icelandic translation - - po/is.po | 39 ++++++++++++++++++++------------------- - 1 file changed, 20 insertions(+), 19 deletions(-) - -commit 60885d1914fad990a220c10fbb5116a1a9b08cf0 -Author: Marek Černocký -Date: Tue Feb 3 22:04:59 2015 +0100 - - Updated Czech translation - - po/cs.po | 249 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 132 insertions(+), 117 deletions(-) - -commit f5f35a598e71c6b38b92c88b592b415f534b3aa4 -Author: Felix Riemann -Date: Mon Feb 2 21:06:55 2015 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a4d5c7fda197c223b3b30956577f2e7fa0bdba9a -Author: Felix Riemann -Date: Mon Feb 2 21:04:37 2015 +0100 - - Update for release 3.15.1 - - NEWS | 35 +++++++++++++++++++++++++++++++++++ - 1 file changed, 35 insertions(+) - -commit a86c990b8fff9714a313070d65d287879d45a875 -Author: Felix Riemann -Date: Mon Feb 2 20:36:17 2015 +0100 - - EogWindow: Cleanups for 254f4ba4 - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 8 ++------ - 1 file changed, 2 insertions(+), 6 deletions(-) - -commit 254f4ba40788749948f1740291ccb942733493c3 -Author: Jente Hidskes -Date: Sat Jan 31 18:25:00 2015 +0100 - - EogWindow: make the Open With submenu work - - The editor_app has been removed, since it will cause all entries in - the submenu to be disabled. The editor application should be listed - amongst the entries anyway, so it made no sense keeping it. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - https://bugzilla.gnome.org/show_bug.cgi?id=740426 - - data/eog-gear-menu.ui | 5 +- - data/popup-menus.ui | 3 +- - src/eog-window.c | 305 +++++++++++++++++--------------------------------- - 3 files changed, 109 insertions(+), 204 deletions(-) - -commit ba57d4aa20260caf3f0f7e506bcdbf986ae03553 -Author: Sveinn í Felli -Date: Mon Feb 2 11:05:14 2015 +0000 - - Updated Icelandic translation - - po/is.po | 1893 ++++++++++++++++++++++++++++++++++++++++++++------------------ - 1 file changed, 1345 insertions(+), 548 deletions(-) - -commit eb8c706cbd2754f9487adb87e63c4d26ddd98481 -Author: Daniel Mustieles -Date: Mon Feb 2 11:54:03 2015 +0100 - - Updated Spanish translation - - po/es.po | 282 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 143 insertions(+), 139 deletions(-) - -commit e26f5629eb11f6dc22f6172876397b809b1bad7e -Author: Felix Riemann -Date: Sat Jan 31 16:09:01 2015 +0100 - - reload: Fix memory leak in menu cleanup code - - plugins/reload/eog-reload-plugin.c | 16 ++++++++++------ - 1 file changed, 10 insertions(+), 6 deletions(-) - -commit 44cbe596bd3e17f062dd332d04d104d563dd7577 -Author: Felix Riemann -Date: Sat Jan 31 15:37:15 2015 +0100 - - EogWindow: Fix leaking gear menu builder - - src/eog-window.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit 341e8b6e688bba0654f30cd40cb8d1eefbf556d3 -Author: Felix Riemann -Date: Fri Jan 30 23:30:55 2015 +0100 - - reload: Update to GAction - - Menu handling as shown in the GTK+ plugman example. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - plugins/reload/eog-reload-plugin.c | 134 ++++++++++++++++++-------------- - plugins/reload/reload.plugin.desktop.in | 2 +- - 2 files changed, 78 insertions(+), 58 deletions(-) - -commit 8b74808890afdff86f01e4b2748f3e4733068937 -Author: Felix Riemann -Date: Fri Jan 30 22:58:18 2015 +0100 - - EogWindow: Allow plugin entries in gear menu - - Based on the corresponding feature in Totem. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - data/eog-gear-menu.ui | 1 + - src/eog-window.c | 18 +++++++++++++++++- - src/eog-window.h | 3 +++ - 3 files changed, 21 insertions(+), 1 deletion(-) - -commit ad1c325ecea47d1fd7d16f8a564c75971850c481 -Author: Balázs Úr -Date: Fri Jan 30 20:38:54 2015 +0000 - - Updated Hungarian translation - - po/hu.po | 279 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 142 insertions(+), 137 deletions(-) - -commit 3dab203da36d5d2ff63fec7e146ce27606701cf4 -Author: Stas Solovey -Date: Thu Jan 29 22:17:56 2015 +0000 - - Updated Russian translation - - po/ru.po | 298 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 159 insertions(+), 139 deletions(-) - -commit c90bfa65c9c5494aea308fa889ff89e1c28c8804 -Author: Felix Riemann -Date: Wed Jan 28 21:10:33 2015 +0100 - - EogWindow: Try a different range for the zoom scale - - This is a first try to tame it. - - src/eog-window.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -commit 9e6547c519eccaca6abafd7f1a62bec8488be62f -Author: Felix Riemann -Date: Wed Jan 28 21:02:45 2015 +0100 - - EogWindow: Update gear menu - - First improvements following suggestions by Allan Day. - - data/eog-gear-menu.ui | 88 +++++++++++++++++++++++++++------------------------ - 1 file changed, 47 insertions(+), 41 deletions(-) - -commit 366b3b1a62a1022116430b6ac17ecf2e3c77048e -Author: Felix Riemann -Date: Wed Jan 28 20:49:03 2015 +0100 - - EogWindow: Disable zoom button if no image is loaded - - src/eog-window.c | 5 +++++ - 1 file changed, 5 insertions(+) - -commit febad1aed4966798f99726c91dbddb945d84e9eb -Author: Felix Riemann -Date: Wed Jan 28 19:47:20 2015 +0100 - - Remove unneeded subsection in the app menu - - data/eog-app-menu.xml | 42 +++++++++++++++++++----------------------- - 1 file changed, 19 insertions(+), 23 deletions(-) - -commit b1dd9bf9d41e6c184f6b0e1c26155314d9798282 -Author: Felix Riemann -Date: Wed Jan 28 19:39:13 2015 +0100 - - EogScrollView: Visually merge the overlaid rotate buttons - - Incorporating UI feedback from Allan Day. - - src/eog-scroll-view.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit 963d754d5008f311c44f8a36dde36c142867e91e -Author: Felix Riemann -Date: Wed Jan 28 19:32:35 2015 +0100 - - EogScrollView: Make overlay buttons use the 'osd' style class - - src/eog-scroll-view.c | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - -commit e8f207ec85a94e6fb2ab378e472e9cddca45fe33 -Author: Dušan Kazik -Date: Tue Jan 27 16:27:22 2015 +0000 - - Updated Slovak translation - - po/sk.po | 1379 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 673 insertions(+), 706 deletions(-) - -commit 2370d5c82163be83750c4173ac679761c78c8763 -Author: Yosef Or Boczko -Date: Mon Jan 26 22:42:52 2015 +0200 - - Updated Hebrew translation - - po/he.po | 10 +++++++--- - 1 file changed, 7 insertions(+), 3 deletions(-) - -commit a5bd8eccdaebc8c14484ac39c0b5c0133a839cb9 -Author: Felix Riemann -Date: Mon Jan 26 20:21:41 2015 +0100 - - EogWindow: Simplify metadata sidebar title - - src/eog-window.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a986da9208e865fe1f76f2e0412a3d7016b1b83f -Author: Yosef Or Boczko -Date: Mon Jan 26 21:09:37 2015 +0200 - - Updated Hebrew translation - - po/he.po | 257 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 131 insertions(+), 126 deletions(-) - -commit bf4085fa5d21ce184c33f290e12d35af5e67301b -Author: Piotr Drąg -Date: Sat Jan 24 20:58:58 2015 +0100 - - Updated POTFILES.in - - po/POTFILES.in | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit a898c26195d9f643821c44280b84b818ae0d0191 -Author: Felix Riemann -Date: Sat Jan 24 18:47:25 2015 +0100 - - EogScrollView: Add tooltips to overlaid buttons - - src/eog-scroll-view.c | 17 ++++++++++++++--- - 1 file changed, 14 insertions(+), 3 deletions(-) - -commit 09f08726398111c9e8fcf2c25ac43110a5f4c560 -Author: Felix Riemann -Date: Sat Jan 24 18:39:56 2015 +0100 - - EogScrollView: Hide and reveal the overlay buttons by mouse movement - - src/eog-scroll-view.c | 94 +++++++++++++++++++++++++++++++++++++++++++++++---- - 1 file changed, 88 insertions(+), 6 deletions(-) - -commit c3f1ba2a6317dd3698492964efdaae688c41a911 -Author: Felix Riemann -Date: Sat Jan 24 17:38:01 2015 +0100 - - EogScrollView: Add overlay buttons to switch images - - Revealing and hiding is not yet active. - - data/eog.css | 9 +++++ - src/eog-scroll-view.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++-- - 2 files changed, 100 insertions(+), 2 deletions(-) - -commit 828bd784b1ae0ff3251db9854ec61d6b29dfd42c -Author: Daniel Martinez -Date: Thu Jan 22 19:44:35 2015 +0100 - - Update Aragonese translation - - po/an.po | 946 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 453 insertions(+), 493 deletions(-) - -commit 1c4522852d89c43ac26559a8734ab984e17bf68f -Author: Marek Černocký -Date: Wed Jan 21 08:00:06 2015 +0100 - - Updated Czech translation - - po/cs.po | 133 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 73 insertions(+), 60 deletions(-) - -commit 94ceb3d5679c89a099717c3b7dc741c0558c1adb -Author: Jente Hidskes -Date: Sat Jan 17 18:21:27 2015 +0100 - - EogWindow: remove the Recent Images submenu - - It creates more issues than it's worth, as explained in - https://bugzilla.gnome.org/show_bug.cgi?id=741050#c51 - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - https://bugzilla.gnome.org/show_bug.cgi?id=740426 - - data/eog-gear-menu.ui | 6 -- - src/eog-window.c | 238 -------------------------------------------------- - 2 files changed, 244 deletions(-) - -commit 936754d7de440d12f66839cf8651454b9bece9e8 -Author: Daniel Mustieles -Date: Mon Jan 19 18:21:45 2015 +0100 - - Updated Spanish translation - - po/es.po | 158 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 81 insertions(+), 77 deletions(-) - -commit dbe4fe97ed016077f211484b1357024d6629db42 -Author: Dimitris Spingos -Date: Sun Jan 18 22:03:33 2015 +0200 - - Updated Greek translation - - po/el.po | 973 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 470 insertions(+), 503 deletions(-) - -commit 2712b8e0383469461af96e58dacc703a4f682e6a -Author: Balázs Úr -Date: Sun Jan 18 17:45:55 2015 +0000 - - Updated Hungarian translation - - po/hu.po | 161 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 82 insertions(+), 79 deletions(-) - -commit cc19771f7fa7e5824aad8082c5808ea1d810e2d1 -Author: Aurimas Černius -Date: Sat Jan 17 22:04:12 2015 +0200 - - Updated Lithuanian translation - - po/lt.po | 994 +++++++++++++++++++++++---------------------------------------- - 1 file changed, 364 insertions(+), 630 deletions(-) - -commit adce09fdd4efb0949e101effb7c24e5ec12d7dda -Author: Inaki Larranaga Murgoitio -Date: Sat Jan 17 14:12:46 2015 +0100 - - Updated Basque language - - po/eu.po | 249 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 144 insertions(+), 105 deletions(-) - -commit 17f54b47eb920fbd20acaf40b9b2a90d9f6bea2d -Author: Felix Riemann -Date: Sat Jan 17 12:58:56 2015 +0100 - - EogWindow: Fix some overindented function parameters - - src/eog-window.c | 92 ++++++++++++++++++++++++++++---------------------------- - 1 file changed, 46 insertions(+), 46 deletions(-) - -commit 5b9f6f5e8e4b14c39b35dbd4b31712ffd0a2bf04 -Author: Felix Riemann -Date: Fri Jan 16 22:20:13 2015 +0100 - - EogSidebar: Center and reformat page selector - - data/eog.css | 4 ++++ - src/eog-sidebar.c | 23 ++++++++++++++++++++--- - 2 files changed, 24 insertions(+), 3 deletions(-) - -commit fec0939df2d96ea2eac3e5ee68540a262ea99302 -Author: Felix Riemann -Date: Thu Jan 15 23:27:51 2015 +0100 - - EogMetadataSidebar: Fix leaked strings - - src/eog-metadata-sidebar.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - -commit a54b3a803c0721b518b8867ceede418d1dce720e -Author: Felix Riemann -Date: Thu Jan 15 23:03:39 2015 +0100 - - EogWindow: Set file open dialog transient for its parent window - - src/eog-window.c | 13 +++++++------ - 1 file changed, 7 insertions(+), 6 deletions(-) - -commit db3a16e905d106d6e88d7a205c12f2dc51c92b99 -Author: Felix Riemann -Date: Thu Jan 15 22:47:29 2015 +0100 - - EogSidebar: Set orientation property via g_object_new - - src/eog-sidebar.c | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - -commit 10a6c5f6e9916caa3a7a6af1d3bbffc99c4a2169 -Author: Felix Riemann -Date: Thu Jan 15 21:54:50 2015 +0100 - - Fix duplicate underscore accelerators in gear menu - - https://bugzilla.gnome.org/show_bug.cgi?id=740426 - - data/eog-gear-menu.ui | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit af0def5f1cba5b718e98320686fe6f98ddfa92a0 -Author: Yosef Or Boczko -Date: Thu Jan 15 00:41:32 2015 +0200 - - Updated Hebrew translation - - po/he.po | 1139 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 546 insertions(+), 593 deletions(-) - -commit 9156ad9b33e9da27dddd5182637c74b75614d9d2 -Author: Felix Riemann -Date: Wed Jan 14 23:29:54 2015 +0100 - - Add new UI file to POTFILES.in - - https://bugzilla.gnome.org/show_bug.cgi?id=740426 - - po/POTFILES.in | 1 + - 1 file changed, 1 insertion(+) - -commit de5ee93aa325bc29a2e00e8d874af97cebb10cd6 -Author: Jente Hidskes -Date: Wed Jan 14 23:09:31 2015 +0100 - - EogWindow: implement headerbar - - https://bugzilla.gnome.org/show_bug.cgi?id=740426 - - data/Makefile.am | 1 + - data/eog-gear-menu.ui | 49 +++++++++++++++++ - src/eog-scroll-view.c | 10 ---- - src/eog-scroll-view.h | 10 ++++ - src/eog-window.c | 146 +++++++++++++++++++++++++++++++++++++++++++++++--- - src/eog.gresource.xml | 1 + - 6 files changed, 200 insertions(+), 17 deletions(-) - -commit 9b3d863db9ddaefcaa726b15c7f755c5b554744b -Author: Trần Ngọc Quân -Date: Wed Jan 14 08:00:34 2015 +0700 - - Updated Vietnamese translation - - Signed-off-by: Trần Ngọc Quân - - po/vi.po | 924 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 429 insertions(+), 495 deletions(-) - -commit 51532cf4f776da95f4b10772dbbe3ef2fae7dff3 -Author: Felix Riemann -Date: Tue Jan 13 19:48:35 2015 +0100 - - EogSidebar: Use symbolic close icon - - src/eog-sidebar.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c0a51e581c4ba6ab91b3c1f6669f782a8df808fa -Author: Felix Riemann -Date: Tue Jan 13 19:44:04 2015 +0100 - - EogMetadataSidebar: Reduce row spacing to 3px - - Should improve the separation of the different tag groups. - - data/metadata-sidebar.ui | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit be4c5f88fde3861cb0fa1febafe0d29266e7e71c -Author: Fran Dieguez -Date: Mon Jan 12 23:54:04 2015 +0100 - - Updated Galician translations - - po/gl.po | 1157 +++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 548 insertions(+), 609 deletions(-) - -commit 650b54a7fbe106ad6d15aa626d80c91a91573fec -Author: hanniedu -Date: Mon Jan 12 17:19:56 2015 +0100 - - Updated Dutch translation Master 3.16 - - po/nl.po | 1211 ++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 585 insertions(+), 626 deletions(-) - -commit 841e96d56d36b96510658aa0ad8bd6cd983daba1 -Author: Stas Solovey -Date: Mon Jan 12 12:36:54 2015 +0000 - - Updated Russian translation - - po/ru.po | 978 ++++++++++++++++++++++----------------------------------------- - 1 file changed, 339 insertions(+), 639 deletions(-) - -commit 3f3bc09db3ed4c36128eff1aa6bf23a72b8efb8d -Author: Daniel Mustieles -Date: Mon Jan 12 12:15:06 2015 +0100 - - Updated Spanish translation - - po/es.po | 143 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 87 insertions(+), 56 deletions(-) - -commit a31ead7ad37b959b0200f82ef55ef2fd1bfb73c2 -Author: Balázs Úr -Date: Sat Jan 10 11:00:17 2015 +0000 - - Updated Hungarian translation - - po/hu.po | 1124 +++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 534 insertions(+), 590 deletions(-) - -commit 4fbf532fb0720237a646ed999f17c76170a98e6e -Author: Rafael Ferreira -Date: Thu Jan 8 23:38:09 2015 +0000 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 1183 ++++++++++++++++++++++++++++------------------------------- - 1 file changed, 561 insertions(+), 622 deletions(-) - -commit 6dc9355ce54e8f31974e4fb503bc16aaee30369f -Author: Marek Černocký -Date: Thu Jan 8 23:02:05 2015 +0100 - - Updated Czech translation - - po/cs.po | 128 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 77 insertions(+), 51 deletions(-) - -commit 83bf6c4498e9c107a809517e1a2926df251acc16 -Author: Felix Riemann -Date: Wed Jan 7 21:59:39 2015 +0100 - - EogMetadataSidebar: Hook up date and time labels - - src/eog-metadata-sidebar.c | 11 ++++++++--- - 1 file changed, 8 insertions(+), 3 deletions(-) - -commit 93129f1faf5dd6573ae91122ec08b70be5bf25b6 -Author: Felix Riemann -Date: Wed Jan 7 21:59:13 2015 +0100 - - EogExifUtil: Allow freeform formatting of date strings - - src/eog-exif-util.c | 55 +++++++++++++++++++++++++++++++++++++---------------- - src/eog-exif-util.h | 4 ++++ - 2 files changed, 43 insertions(+), 16 deletions(-) - -commit 2e5b0655db5199046d84b0f98daad4d015e3b2d6 -Author: Felix Riemann -Date: Wed Jan 7 20:15:07 2015 +0100 - - EogMetadataSidebar: Try to unclutter and improve the sidebar's look - - Based on a design by Allan Day. - - data/Makefile.am | 1 + - data/metadata-sidebar.ui | 409 +++++++++++++++++++++++++++++++++++++++++++++ - po/POTFILES.in | 1 + - src/eog-metadata-sidebar.c | 366 +++++++--------------------------------- - src/eog.gresource.xml | 1 + - 5 files changed, 471 insertions(+), 307 deletions(-) - -commit 8cdbae1f54b0fb746343595c8423c1adcca833ee -Author: Felix Riemann -Date: Wed Jan 7 19:59:21 2015 +0100 - - EogWindow: Move sidebar to the opposite side of the image - - src/eog-window.c | 9 ++++----- - 1 file changed, 4 insertions(+), 5 deletions(-) - -commit 68369759466670395eb874eb145f48ba03a0652d -Author: Daniel Mustieles -Date: Thu Jan 8 18:22:33 2015 +0100 - - Updated Spanish translation - - po/es.po | 1127 +++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 523 insertions(+), 604 deletions(-) - -commit 1c324ab120a96d07b3a4cc90e5ecf6a626ad8096 -Author: Marek Černocký -Date: Wed Jan 7 21:46:15 2015 +0100 - - Updated Czech translation - - po/cs.po | 925 +++++++++++++++++++++------------------------------------------ - 1 file changed, 302 insertions(+), 623 deletions(-) - -commit e025f72df93d62ebd94c5eb91bee2bd682fdee8f -Author: Inaki Larranaga Murgoitio -Date: Wed Jan 7 21:28:41 2015 +0100 - - Updated Basque language - - po/eu.po | 1039 ++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 476 insertions(+), 563 deletions(-) - -commit f8051de56416e9a49184065c70c1e926a3ae8187 -Merge: 631b66c8 5cfdbd1c -Author: Felix Riemann -Date: Wed Jan 7 19:43:50 2015 +0100 - - Merge branch 'wip/gaction-migration' - - Conflicts: - src/eog.gresource.xml - - This is the merge of the current state as it is required - for further developments. The "OpenWith" and "RecentFiles" menus - are still todo as is plugin integration. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - -commit 631b66c849674c8118393ab967a9dd9229f6e681 -Author: Felix Riemann -Date: Mon Jan 5 19:27:57 2015 +0100 - - Remove accidential executable bit from documentation images - - help/hu/figures/multiple-convert.png | Bin - help/hu/figures/multiple-rename-count.png | Bin - 2 files changed, 0 insertions(+), 0 deletions(-) - -commit 65720c07c943885a0048220b7a35d91002afc164 -Author: Felix Riemann -Date: Mon Jan 5 19:06:26 2015 +0100 - - EogThumbnail: Load thumbnail frame from a GResource - - Also optimize the frame's filesize. - - data/pixmaps/Makefile.am | 7 +------ - data/pixmaps/thumbnail-frame.png | Bin 908 -> 474 bytes - src/eog-thumbnail.c | 4 +++- - src/eog.gresource.xml | 1 + - 4 files changed, 5 insertions(+), 7 deletions(-) - -commit b9df4c049e493ba3d9f29193bdeb6d5b0ca95a2c -Author: Felix Riemann -Date: Mon Jan 5 18:15:21 2015 +0100 - - EogApplication: Use gtk_application_get_active_window - - This allows dropping our own implementation. - - src/eog-application.c | 36 +++++++++++++----------------------- - 1 file changed, 13 insertions(+), 23 deletions(-) - -commit b35bbcc21e77ecd6b66f280f31859d87e179530b -Author: Felix Riemann -Date: Mon Jan 5 17:59:55 2015 +0100 - - Build API docs without intermediate tmpl-files - - gtk-doc devs consider the tmpl-based workflow as obsolete. - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit f7c670c29bf328071129bded4446646470e6287c -Author: Andreas Nilsson -Date: Mon Jan 5 16:34:03 2015 +0100 - - Remove the scalable app icon - - Should make the 256x256 high resolution PNG the prefered - one for display in gnome-shell. - - https://bugzilla.gnome.org/show_bug.cgi?id=742369 - - data/icons/scalable/Makefile.am | 3 - - data/icons/scalable/apps/eog.svg | 548 --------------------------------------- - 2 files changed, 551 deletions(-) - -commit 27fb2129a74a8dc2521346c597073dc44fc91422 -Author: Felix Riemann -Date: Sun Jan 4 19:19:54 2015 +0100 - - EogThumbNav: Stop deprecated GtkArrow usage - - Use a matching GtkImage instead. Swapping the icons in RTL locales - is done automatically by the icon theme. - - src/eog-thumb-nav.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 096806fdea91c89ae918910348b051f2c0e86f91 -Author: Felix Riemann -Date: Sun Jan 4 19:19:07 2015 +0100 - - EogSidebar: Stop deprecated GtkArrow usage - - Use a matching GtkImage instead. - - src/eog-sidebar.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 5cfdbd1c2ab3f2af96d9b9a6cacd5a7879ad1599 -Author: Felix Riemann -Date: Sun Jan 4 17:57:23 2015 +0100 - - EogWindow: Add missing view-* actions to the window action group - - These actions were part of it beforehand and were forgotten - in the initial GAction port. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - -commit 467aa7459a2515e15c72cb359fb5b2839e3092ca -Author: Felix Riemann -Date: Sun Jan 4 16:05:48 2015 +0100 - - EogWindow: Fix indentation in commit 965549c0 - - Also remove some trailing commas in array initializers. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 24 ++++++++++++------------ - 1 file changed, 12 insertions(+), 12 deletions(-) - -commit ab4e432c083275869c744a721b3bb5d37c2ee5fd -Author: Felix Riemann -Date: Sun Jan 4 15:56:45 2015 +0100 - - EogScrollView: Use gdk_cursor_new_for_display - - gdk_cursor_new() will be deprecated in GTK+ 3.16 and we have - the correct display at hand already anyway. - - src/eog-scroll-view.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 965549c0d12668d3225affc11da89513a946c3b9 -Author: Jente Hidskes -Date: Mon Dec 29 20:40:31 2014 +0100 - - EogWindow: implement "groupwise" enabling/disabling of actions - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++++------- - 1 file changed, 88 insertions(+), 11 deletions(-) - -commit 97035fa063a4c6b96fcaabce7d40a201ea1f8dd9 -Author: Christian Kirbach -Date: Sat Jan 3 14:16:58 2015 +0000 - - Updated German translation - - help/de/de.po | 1510 +++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 922 insertions(+), 588 deletions(-) - -commit e88b8b6c3b789a3edad93b2920924b66f349531f -Author: Felix Riemann -Date: Thu Dec 25 15:52:00 2014 +0100 - - EogPropertiesDialog: Automatically make parent window actions available - - Allows accessing the parent window's GActions via the "win" namespace. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-properties-dialog.c | 49 +++++++++++++++++++++++++++------------------ - 1 file changed, 30 insertions(+), 19 deletions(-) - -commit 09fe55c6ca5206668db2da20f751fbe690437947 -Author: Jente Hidskes -Date: Tue Dec 23 23:04:49 2014 +0100 - - EogPropertiesDialog: migrate to GAction - - This patch takes care of the GAction migration in EogPropertiesDialog. - It should be considered a draft, as it is not working yet. - - There is one thing to note: the action names for the dialog are now - hardcoded in EogWindow. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-properties-dialog.c | 24 ++++++++++++------------ - src/eog-properties-dialog.h | 4 ++-- - src/eog-window.c | 13 ++----------- - 3 files changed, 16 insertions(+), 25 deletions(-) - -commit 69a80edd4db7a9adf796e8019a7a70e55230c30b -Author: Felix Riemann -Date: Tue Dec 23 17:52:55 2014 +0100 - - EogWindow: Fix critical warning when switching between fullscreen modes - - src/eog-window.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -commit 0309e59fa59b6dc11d94810087a116763541e6bb -Author: Felix Riemann -Date: Tue Dec 23 17:48:24 2014 +0100 - - EogWindow: Drop unneeded handler blocks - - As the action state is now changed without triggering the handlers - they don't need to be blocked anymore. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 18 ------------------ - 1 file changed, 18 deletions(-) - -commit df87939c78373051683f73660893fb87eeb372e2 -Author: Felix Riemann -Date: Tue Dec 23 17:22:45 2014 +0100 - - EogWindow: Use gtk_widget_set_visible - - src/eog-window.c | 14 +++----------- - 1 file changed, 3 insertions(+), 11 deletions(-) - -commit 3aa22d49f74551051e4c0d86f3ecf3fd3240cb2c -Author: Jente Hidskes -Date: Mon Dec 22 23:55:13 2014 +0100 - - EogWindow: remove zoom-fit action - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 20 -------------------- - 1 file changed, 20 deletions(-) - -commit 0d632979adf0bdd650fffd3ad2e190ec03f1b01a -Author: Felix Riemann -Date: Tue Dec 23 17:05:13 2014 +0100 - - Adjust fullscreen toolbar's action names - - Makes the toolbar work again after e2723eaf. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - data/fullscreen-toolbar.ui | 24 ++++++++++++------------ - 1 file changed, 12 insertions(+), 12 deletions(-) - -commit 87d65c884460426c140c7861a148511bf1d7705e -Author: Felix Riemann -Date: Tue Dec 23 16:23:20 2014 +0100 - - Restore keyboard shortcut for slideshow mode - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-application.c | 1 + - 1 file changed, 1 insertion(+) - -commit f23f70136861dee2519cf72828c416a907418e53 -Author: Felix Riemann -Date: Sun Dec 21 15:55:24 2014 +0100 - - Fix renamed file in POTFILES.in - - data/Makefile.am | 2 +- - po/POTFILES.in | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit 419b0ec142fbe64b7ae5267f42275e6c0edef2fa -Author: Felix Riemann -Date: Sun Dec 21 15:52:03 2014 +0100 - - EogApplication: Restore accelerator for Save As - - This one fell under the rug in commit 31368a7d. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-application.c | 1 + - 1 file changed, 1 insertion(+) - -commit 31368a7d721465dfcc2e9f61fa90704c7af83e33 -Author: Felix Riemann -Date: Sun Dec 21 15:47:44 2014 +0100 - - EogApplication: Make accelerator assignments easier to read - - Based on code found in Evince's EvApplication class. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-application.c | 74 ++++++++++++++++++++++++++++++++------------------- - 1 file changed, 46 insertions(+), 28 deletions(-) - -commit 1d0bc8471bdc53db0c5d84f6859d3b5596795271 -Author: Jente Hidskes -Date: Sat Dec 20 02:09:30 2014 +0100 - - EogApplication: add accelerators to GActions - - This patch adds accelerators to those GActions whose GtkActions - used to have accelerators. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-application.c | 34 ++++++++++++++++++++++++++++++++++ - 1 file changed, 34 insertions(+) - -commit fb7bb77afd2230811ab22a7866beeb83cf94aed0 -Author: Felix Riemann -Date: Fri Dec 19 18:35:18 2014 +0100 - - Avoid endless feedback loop when changing bar visibility - - Also provides feedback to the app menu when the sidebar is closed. - - src/eog-window.c | 16 +++++++--------- - 1 file changed, 7 insertions(+), 9 deletions(-) - -commit e2723eaf178ff92b957204c2f16e80ae0435d63b -Author: Jente Hidskes -Date: Thu Dec 18 19:41:39 2014 +0100 - - change action names to short, lowercase names - - As the GAction documentation suggests, change the GAction - names to short, lowercase names. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - data/popup-menus.ui | 16 ++--- - src/eog-window.c | 164 ++++++++++++++++++++++++++-------------------------- - 2 files changed, 90 insertions(+), 90 deletions(-) - -commit 8ea5e61c147ec80aa1065bd6ac0be57de0ac0e60 -Author: Jente Hidskes -Date: Thu Dec 18 19:01:07 2014 +0100 - - EogWindow: remove the string matching from ui_settings_changed_cb - - The changed setting is now passed as a detailed signal instead - of having to do string matching inside eog_window_ui_settings_changed_cb. - In order to facilitate this change, the connecting of the callbacks had - to be moved down a few lines to after the GActions are added to the window. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 40 +++++++++++++++++++--------------------- - 1 file changed, 19 insertions(+), 21 deletions(-) - -commit bc4e3dbf7e7d85908e6b3c20d8dbe14e2e7edde3 -Author: Jente Hidskes -Date: Thu Dec 18 18:32:40 2014 +0100 - - EogWindow: disable the open-with and recently-used menus - - Disable the open-with and recently-used code, to prevent compile errors. They - are commented because we might still need them in the new design, but are - disabled to not hold us back for now. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 58 +++++++++++++++++++++++++++++++------------------------- - 1 file changed, 32 insertions(+), 26 deletions(-) - -commit 85339ccdbdb17af357dc837f12791b9d2fb151e2 -Author: Felix Riemann -Date: Thu Dec 18 20:53:55 2014 +0100 - - Don't reuse the GtkMenu but the menu model for the thumb view - - data/popup-menus.ui | 50 -------------------------------------------------- - src/eog-window.c | 16 ++++++++-------- - 2 files changed, 8 insertions(+), 58 deletions(-) - -commit d6fa7a086c97408b4f281320293b98f2f7e43f15 -Author: Felix Riemann -Date: Thu Dec 18 20:30:42 2014 +0100 - - Use separate object for thumbnail popup menu - - Assigning a GtkMenu twice is not guaranteed to be glitchfree. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - data/Makefile.am | 2 +- - data/{eog-view-popup.ui => popup-menus.ui} | 50 ++++++++++++++++++++++++++++++ - src/eog-window.c | 22 ++++++------- - src/eog.gresource.xml | 2 +- - 4 files changed, 62 insertions(+), 14 deletions(-) - -commit 9793b8ce016242704a2a55912d948ce3283275ce -Author: Felix Riemann -Date: Thu Dec 18 20:04:45 2014 +0100 - - Update git.mk - - Revision bf30ed81 from https://github.com/behdad/git.mk - - git.mk | 26 +++++++++++++++++++++----- - 1 file changed, 21 insertions(+), 5 deletions(-) - -commit 7e43f480abc3b9a17f91f354fd9c0e71aea1595c -Author: Felix Riemann -Date: Thu Dec 18 19:53:42 2014 +0100 - - Record new GtkBuilder files in Makefiles - - data/Makefile.am | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit d82e711cdbcfb9bf12ab6f8c2edd17a1df90b621 -Author: Felix Riemann -Date: Thu Dec 18 19:01:09 2014 +0100 - - Add fullscreen toolbar to POTFILES - - po/POTFILES.in | 1 + - 1 file changed, 1 insertion(+) - -commit d87f0a29e72d378b32d9ce5f20e48c6946e94a3f -Author: Felix Riemann -Date: Thu Dec 18 18:27:41 2014 +0100 - - Stop trying to build menus with GtkUIManager - - data/eog-ui.xml | 39 --------------------------------------- - src/eog-window.c | 11 ++++------- - src/eog.gresource.xml | 1 - - 3 files changed, 4 insertions(+), 47 deletions(-) - -commit 3a0d54caf6c70bb46271d36b0ecabc9c8d8033e7 -Author: Felix Riemann -Date: Thu Dec 18 18:12:00 2014 +0100 - - Convert fullscreen toolbar to GAction/GtkBuilder - - data/fullscreen-toolbar.ui | 218 +++++++++++++++++++++++++++++++++++++++++++++ - src/eog-window.c | 15 ++-- - src/eog.gresource.xml | 1 + - 3 files changed, 228 insertions(+), 6 deletions(-) - -commit b1b868035d5a580459b7a83bc5e9bfb9a3d33985 -Author: Felix Riemann -Date: Wed Dec 17 22:14:36 2014 +0100 - - Remove debug printouts - - src/eog-window.c | 5 +---- - 1 file changed, 1 insertion(+), 4 deletions(-) - -commit 1e378def9cb7d4fc13d738daf821f647eb871919 -Author: Felix Riemann -Date: Wed Dec 17 22:03:58 2014 +0100 - - Make thumbnail popup share its model with the scrollview - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -commit 49fe9e214c064e7f7a5beb89232982f5f5d96700 -Author: Felix Riemann -Date: Wed Dec 17 21:34:28 2014 +0100 - - Populate EogScrollView popup menu using GtkBuilder - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - data/eog-ui.xml | 19 ------------------ - data/eog-view-popup.ui | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++ - po/POTFILES.in | 1 + - src/eog-window.c | 10 +++++++++- - src/eog.gresource.xml | 1 + - 5 files changed, 64 insertions(+), 20 deletions(-) - -commit a004b0b24f3f6bad3308fbdd878596184a0a45cc -Author: Felix Riemann -Date: Wed Dec 17 21:05:23 2014 +0100 - - Remove EggEditableToolbar files from translation - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - po/POTFILES.in | 2 -- - 1 file changed, 2 deletions(-) - -commit 567b86dbdb099f2b56afd8c88ff8d59ff8bf1004 -Author: Felix Riemann -Date: Wed Dec 17 20:08:39 2014 +0100 - - Add back eog_window_open_editor as we might still need it - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 41 ++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 40 insertions(+), 1 deletion(-) - -commit 73b6d67391649d8224435f53d6329c4436976b7c -Author: Jente Hidskes -Date: Tue Dec 16 21:11:02 2014 +0100 - - Remove the GtkMenuBar - - This patch removes all code for the GtkMenuBar in Eye of Gnome. This is - necessary because the new GActions are incompatible with it and it needs to be - removed for the UI update as well. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - data/eog-ui.xml | 83 -------------------------------------- - src/eog-window.c | 121 ++----------------------------------------------------- - 2 files changed, 3 insertions(+), 201 deletions(-) - -commit 92caaf8db45b8b891225beaa8cb0194f44d36e67 -Author: Jente Hidskes -Date: Tue Dec 16 00:46:36 2014 +0100 - - Remove all other references to the toolbar - - This patch removes all further references to the toolbar. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - Makefile.am | 2 +- - configure.ac | 9 - - cut-n-paste/Makefile.am | 3 - - cut-n-paste/toolbar-editor/Makefile.am | 105 -- - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 1936 -------------------- - cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 95 - - cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 677 ------- - cut-n-paste/toolbar-editor/egg-toolbar-editor.h | 63 - - cut-n-paste/toolbar-editor/egg-toolbars-model.c | 987 ---------- - cut-n-paste/toolbar-editor/egg-toolbars-model.h | 190 -- - cut-n-paste/toolbar-editor/eggmarshalers.list | 1 - - .../update-toolbareditor-from-libegg.sh | 33 - - data/Makefile.am | 5 - - data/eog-app-menu.xml | 4 - - data/eog-toolbar.xml | 37 - - data/eog-ui.xml | 2 - - data/eog.convert | 1 - - data/org.gnome.eog.gschema.xml.in | 6 +- - doc/reference/Makefile.am | 2 - - doc/reference/eog-sections.txt | 4 - - tests/actions.feature | 9 - - 21 files changed, 2 insertions(+), 4169 deletions(-) - -commit 2c5e3979a65f6525c3dfb0c96fa91458bf3b7c56 -Author: Jente Hidskes -Date: Tue Dec 16 00:30:18 2014 +0100 - - src: remove all code related to EggEditableToolbar - - This patch removes all code for the GtkToolbar inside src/. This is necessary - because the new GActions are incompatible with it and it needs to be removed - for the UI update as well. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/Makefile.am | 5 - - src/eog-application-internal.h | 9 -- - src/eog-application.c | 93 ------------- - src/eog-config-keys.h | 1 - - src/eog-util.c | 1 - - src/eog-window.c | 308 ++--------------------------------------- - 6 files changed, 14 insertions(+), 403 deletions(-) - -commit 677297cd95ea7c446605b10144c54061f5e78d01 -Author: Jente Hidskes -Date: Thu Dec 11 20:01:23 2014 +0100 - - eog-window.c: GtkAction -> GAction - - This patch replaces all the GtkAction related code in eog-window.c to its - GAction equivalents. - - Some things to note: - - 1) I only changed the lines required to change, to keep the diff as small - as possible. I do think some parts in eog-window.c can do with some - cleanup and a consistent style needs to be applied. (I tried to match up - with whatever style was used in the function I was working in.) - 2) I renamed _some_ functions and arguments to better indicate what they're - for, but only those lines I already touched anyway. - 3) actions_window is now directly mapped onto the - GtkApplicationWindow/EogWindow. - 4) We might want to change the action names to short, lowercase names as the - documentation suggests. - 5) The UI is not working anymore, due to incompatibility: it requires - GtkAction. This left me unable to test some/most of the changes, however - I quickly added some accelerators to those actions I could and it all - seems to be working so I have faith the other changes will to. - - What's left to do: - - 1) Test all changes. - 2) Remove deprecated and not-working UI code. - 3) Add accelerators to all actions. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 1075 +++++++++++++++++++++--------------------------------- - 1 file changed, 422 insertions(+), 653 deletions(-) - -commit c0f6deb2b1afdc4c4b414c43388d5575eeea357f -Author: Felix Riemann -Date: Wed Dec 17 21:40:37 2014 +0100 - - Revert "eog-window.c: GtkAction -> GAction" - - This reverts commit 8b1fc17689d3a73abcabfb55de4721c1f7eac22b. - This was not meant to be pushed to master yet. - - src/eog-window.c | 1075 +++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 653 insertions(+), 422 deletions(-) - -commit 099f986965d365ca8cece25fa58f7ddb5ffffb6d -Author: Felix Riemann -Date: Wed Dec 17 21:40:00 2014 +0100 - - Revert "src: remove all code related to EggEditableToolbar" - - This reverts commit 36ff7907cfc0697266fbf43ba0bd55eecb4bac7c. - - src/Makefile.am | 5 + - src/eog-application-internal.h | 9 ++ - src/eog-application.c | 93 +++++++++++++ - src/eog-config-keys.h | 1 + - src/eog-util.c | 1 + - src/eog-window.c | 308 +++++++++++++++++++++++++++++++++++++++-- - 6 files changed, 403 insertions(+), 14 deletions(-) - -commit c8a25656244e794fc85a8d7058d54b8b1def966b -Author: Felix Riemann -Date: Wed Dec 17 21:39:58 2014 +0100 - - Revert "Remove all other references to the toolbar" - - This reverts commit 6df4284cda1954e4192d387a676df1fc50730647. - - Makefile.am | 2 +- - configure.ac | 9 + - cut-n-paste/Makefile.am | 3 + - cut-n-paste/toolbar-editor/Makefile.am | 105 ++ - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 1936 ++++++++++++++++++++ - cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 95 + - cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 677 +++++++ - cut-n-paste/toolbar-editor/egg-toolbar-editor.h | 63 + - cut-n-paste/toolbar-editor/egg-toolbars-model.c | 987 ++++++++++ - cut-n-paste/toolbar-editor/egg-toolbars-model.h | 190 ++ - cut-n-paste/toolbar-editor/eggmarshalers.list | 1 + - .../update-toolbareditor-from-libegg.sh | 33 + - data/Makefile.am | 5 + - data/eog-app-menu.xml | 4 + - data/eog-toolbar.xml | 37 + - data/eog-ui.xml | 2 + - data/eog.convert | 1 + - data/org.gnome.eog.gschema.xml.in | 6 +- - doc/reference/Makefile.am | 2 + - doc/reference/eog-sections.txt | 4 + - tests/actions.feature | 9 + - 21 files changed, 4169 insertions(+), 2 deletions(-) - -commit 9000e9f25687e1ee6425269df63ff86b9e3309c7 -Author: Felix Riemann -Date: Wed Dec 17 21:39:54 2014 +0100 - - Revert "Remove the GtkMenuBar" - - This reverts commit 3d0405be352fa13e7021d19d1ead1375140b41c3. - - data/eog-ui.xml | 83 ++++++++++++++++++++++++++++++++++++++ - src/eog-window.c | 121 +++++++++++++++++++++++++++++++++++++++++++++++++++++-- - 2 files changed, 201 insertions(+), 3 deletions(-) - -commit e68b35ff93617b7ad76460e57b39740e466314e2 -Author: Felix Riemann -Date: Wed Dec 17 21:39:46 2014 +0100 - - Revert "Add back eog_window_open_editor as we might still need it" - - This reverts commit 72253fdf400247092fd6ed613e95f6b023330dc8. - - src/eog-window.c | 41 +---------------------------------------- - 1 file changed, 1 insertion(+), 40 deletions(-) - -commit 72253fdf400247092fd6ed613e95f6b023330dc8 -Author: Felix Riemann -Date: Wed Dec 17 20:08:39 2014 +0100 - - Add back eog_window_open_editor as we might still need it - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 41 ++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 40 insertions(+), 1 deletion(-) - -commit 3d0405be352fa13e7021d19d1ead1375140b41c3 -Author: Jente Hidskes -Date: Tue Dec 16 21:11:02 2014 +0100 - - Remove the GtkMenuBar - - This patch removes all code for the GtkMenuBar in Eye of Gnome. This is - necessary because the new GActions are incompatible with it and it needs to be - removed for the UI update as well. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - data/eog-ui.xml | 83 -------------------------------------- - src/eog-window.c | 121 ++----------------------------------------------------- - 2 files changed, 3 insertions(+), 201 deletions(-) - -commit 6df4284cda1954e4192d387a676df1fc50730647 -Author: Jente Hidskes -Date: Tue Dec 16 00:46:36 2014 +0100 - - Remove all other references to the toolbar - - This patch removes all further references to the toolbar. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - Makefile.am | 2 +- - configure.ac | 9 - - cut-n-paste/Makefile.am | 3 - - cut-n-paste/toolbar-editor/Makefile.am | 105 -- - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 1936 -------------------- - cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 95 - - cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 677 ------- - cut-n-paste/toolbar-editor/egg-toolbar-editor.h | 63 - - cut-n-paste/toolbar-editor/egg-toolbars-model.c | 987 ---------- - cut-n-paste/toolbar-editor/egg-toolbars-model.h | 190 -- - cut-n-paste/toolbar-editor/eggmarshalers.list | 1 - - .../update-toolbareditor-from-libegg.sh | 33 - - data/Makefile.am | 5 - - data/eog-app-menu.xml | 4 - - data/eog-toolbar.xml | 37 - - data/eog-ui.xml | 2 - - data/eog.convert | 1 - - data/org.gnome.eog.gschema.xml.in | 6 +- - doc/reference/Makefile.am | 2 - - doc/reference/eog-sections.txt | 4 - - tests/actions.feature | 9 - - 21 files changed, 2 insertions(+), 4169 deletions(-) - -commit 36ff7907cfc0697266fbf43ba0bd55eecb4bac7c -Author: Jente Hidskes -Date: Tue Dec 16 00:30:18 2014 +0100 - - src: remove all code related to EggEditableToolbar - - This patch removes all code for the GtkToolbar inside src/. This is necessary - because the new GActions are incompatible with it and it needs to be removed - for the UI update as well. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/Makefile.am | 5 - - src/eog-application-internal.h | 9 -- - src/eog-application.c | 93 ------------- - src/eog-config-keys.h | 1 - - src/eog-util.c | 1 - - src/eog-window.c | 308 ++--------------------------------------- - 6 files changed, 14 insertions(+), 403 deletions(-) - -commit 8b1fc17689d3a73abcabfb55de4721c1f7eac22b -Author: Jente Hidskes -Date: Thu Dec 11 20:01:23 2014 +0100 - - eog-window.c: GtkAction -> GAction - - This patch replaces all the GtkAction related code in eog-window.c to its - GAction equivalents. - - Some things to note: - - 1) I only changed the lines required to change, to keep the diff as small - as possible. I do think some parts in eog-window.c can do with some - cleanup and a consistent style needs to be applied. (I tried to match up - with whatever style was used in the function I was working in.) - 2) I renamed _some_ functions and arguments to better indicate what they're - for, but only those lines I already touched anyway. - 3) actions_window is now directly mapped onto the - GtkApplicationWindow/EogWindow. - 4) We might want to change the action names to short, lowercase names as the - documentation suggests. - 5) The UI is not working anymore, due to incompatibility: it requires - GtkAction. This left me unable to test some/most of the changes, however - I quickly added some accelerators to those actions I could and it all - seems to be working so I have faith the other changes will to. - - What's left to do: - - 1) Test all changes. - 2) Remove deprecated and not-working UI code. - 3) Add accelerators to all actions. - - https://bugzilla.gnome.org/show_bug.cgi?id=741050 - - src/eog-window.c | 1075 +++++++++++++++++++++--------------------------------- - 1 file changed, 422 insertions(+), 653 deletions(-) - -commit 805c0fdd230655508fc4263eeb7bc302c088c797 -Author: Felix Riemann -Date: Tue Dec 16 21:42:09 2014 +0100 - - Post-branch version bump - - Show that this is development code again. - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 8559c2bd2b5f904220ef1968818134cea1e27273 -Author: Felix Riemann -Date: Wed Nov 19 21:39:24 2014 +0100 - - Add credits to NEWS that got lost when doing 3.14.3 - - NEWS | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 439c15d62d7cee2e9d918e51b3fe839e66483151 -Author: Felix Riemann -Date: Wed Nov 19 21:33:31 2014 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 345caa1542477439d7ca206b51db84f9c665ec59 -Author: Felix Riemann -Date: Wed Nov 19 21:29:06 2014 +0100 - - Prepare for release 3.14.3 - - NEWS | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - -commit a9be9741fce0b9be0e0d4f9051c576e449b5a1b0 -Author: Felix Riemann -Date: Wed Nov 19 20:31:25 2014 +0100 - - Fix two more memory leaks - - Taken from a Cppcheck report provided by Boris Egorov. - - https://bugzilla.gnome.org/show_bug.cgi?id=740348 - - src/eog-debug.c | 10 +++++----- - src/eog-metadata-sidebar.c | 1 + - 2 files changed, 6 insertions(+), 5 deletions(-) - -commit 64cc76ccbfd7e5c59d007bfc1bac1c1365c501d7 -Author: Boris Egorov -Date: Wed Nov 19 10:26:22 2014 +0600 - - Fix a few memory leaks - - Detected by Cppcheck - - Signed-off-by: Boris Egorov - - src/eog-thumb-view.c | 1 + - src/eog-uri-converter.c | 6 ++++-- - 2 files changed, 5 insertions(+), 2 deletions(-) - -commit 46c38b71222b79f711983164a41a4e9d03283016 -Author: Felix Riemann -Date: Wed Nov 19 19:20:03 2014 +0100 - - Make sure the libpeas-gtk dependency isn't optimized away - - Aggressive linkers could drop the dependency which would - cause problems using during runtime. - Based on a patch for the same problem for gedit by Garret Regier. - - https://bugzilla.gnome.org/show_bug.cgi?id=739618 - - src/eog-preferences-dialog.c | 4 ++++ - 1 file changed, 4 insertions(+) - -commit ff2c74f150e3a90abdae3d1c7f4e50acd7d0b75b -Author: Trần Ngọc Quân -Date: Mon Nov 17 15:10:20 2014 +0700 - - Updated Vietnamese translation - - Signed-off-by: Trần Ngọc Quân - - po/vi.po | 905 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 500 insertions(+), 405 deletions(-) - -commit 682ef39b8f2635ede10b39759a081b0713a8eefd -Author: Felix Riemann -Date: Mon Nov 10 21:29:11 2014 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit edfbfad67322801fb96930ddfff716cf71e91d53 -Author: Felix Riemann -Date: Mon Nov 10 21:16:08 2014 +0100 - - Prepare for release 3.14.2 - - NEWS | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -commit 32d923f7710874f5ebfbf58801b3fb615c089349 -Author: Daniel Martinez -Date: Sun Nov 9 21:21:24 2014 +0100 - - Add Aragonese language - - po/LINGUAS | 1 + - po/an.po | 1692 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1693 insertions(+) - -commit 04c68a4cbcd9affde20b4d3cd5cb3e5d5d320f62 -Author: Baurzhan Muftakhidinov -Date: Thu Nov 6 02:36:35 2014 +0000 - - Updated Kazakh translation - - po/kk.po | 834 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 426 insertions(+), 408 deletions(-) - -commit 061f0d73f6d188e8ec83ba82285d6a77dc05e440 -Author: Timo Jyrinki -Date: Mon Nov 3 18:52:29 2014 +0200 - - Change Finnish translation team web page to l10n.gnome.org - - po/fi.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit f5194f9cfb5d0380da4f685bcba1610c0857d18f -Author: Fabio Tomat -Date: Wed Oct 15 08:52:13 2014 +0000 - - Updated Friulian translation - - po/fur.po | 890 +++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 501 insertions(+), 389 deletions(-) - -commit 07b0b16a66f37993dd6df90e1b59a274c083b8ff -Author: Felix Riemann -Date: Mon Oct 13 20:15:45 2014 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 1b8ba61be89f8cba7e14c604ec7b67f6151c8fe7 -Author: Felix Riemann -Date: Mon Oct 13 20:12:46 2014 +0200 - - Prepare for release 3.14.1 - - NEWS | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - -commit da2cd8a6584aab5479d4086df293b0fe79a17602 -Author: Arash Mousavi -Date: Fri Oct 10 01:17:30 2014 +0330 - - Updates Persian Translations - - po/fa.po | 967 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 547 insertions(+), 420 deletions(-) - -commit b0377f275488308d4bfa9cca3919aff43e76d68d -Author: Felix Riemann -Date: Wed Oct 8 20:58:55 2014 +0200 - - EogCloseConfirmationDialog: Fix label line wrapping (mult. imgs) - - Set a maximum width to actually make line wrapping happen. - Required using deprecated alignment properties again as the label - alignment would go off once line wrapping occured. - - https://bugzilla.gnome.org/show_bug.cgi?id=737772 - - src/eog-close-confirmation-dialog.c | 12 ++++++++++-- - 1 file changed, 10 insertions(+), 2 deletions(-) - -commit e376816206b4c27bbfae0f78e683dddb67602408 -Author: Felix Riemann -Date: Wed Oct 8 20:49:11 2014 +0200 - - EogCloseConfirmationDialog: Fix label line wrapping - - Set a maximum width to actually make line wrapping happen. - Required using deprecated alignment properties again as the label - alignment would go off once line wrapping occured. - - https://bugzilla.gnome.org/show_bug.cgi?id=737772 - - src/eog-close-confirmation-dialog.c | 19 ++++++++++++++++--- - 1 file changed, 16 insertions(+), 3 deletions(-) - -commit 748e2fcb043222b04344b20960282c7ac8553823 -Author: Felix Riemann -Date: Tue Oct 7 22:59:47 2014 +0200 - - Raise required GTK+ version for gesture support - - https://bugzilla.gnome.org/show_bug.cgi?id=737960 - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b8421597766ca8d7134d713175a982302743b0d2 -Author: Changwoo Ryu -Date: Sat Oct 4 22:28:35 2014 +0900 - - Updated Korean help translation - - help/ko/ko.po | 30 +++++++++++++++--------------- - 1 file changed, 15 insertions(+), 15 deletions(-) - -commit 95abbcf3de0865d1f3daadc2a803f00e6c38373d -Author: Seong-ho Cho -Date: Sat Oct 4 22:28:21 2014 +0900 - - Updated Korean help translation - - help/ko/figures/eog-toolbar-editor.png | Bin 0 -> 36100 bytes - help/ko/figures/image-view-prefs.png | Bin 0 -> 33405 bytes - help/ko/figures/multiple-convert.png | Bin 0 -> 37549 bytes - help/ko/figures/multiple-rename-count.png | Bin 0 -> 38083 bytes - help/ko/figures/plugin-send-by-email.png | Bin 0 -> 58381 bytes - help/ko/figures/plugins-all.png | Bin 0 -> 95910 bytes - help/ko/figures/prefs-plugins-date.png | Bin 0 -> 32287 bytes - help/ko/figures/prefs-plugins-fullscreen.png | Bin 0 -> 32255 bytes - help/ko/figures/prefs-plugins.png | Bin 0 -> 31410 bytes - help/ko/figures/slideshow-prefs.png | Bin 0 -> 23359 bytes - 10 files changed, 0 insertions(+), 0 deletions(-) - -commit 49fc45604205f665c418e64c4098b30fe9bf4c7d -Author: Rafael Ferreira -Date: Tue Sep 30 14:50:34 2014 +0000 - - Updated Brazilian Portuguese translation - - help/pt_BR/pt_BR.po | 213 ++++++++++++++++++++++++++-------------------------- - 1 file changed, 105 insertions(+), 108 deletions(-) - -commit 037affa01e076619fb7ead15833e24d3c5c61d01 -Author: Felix Riemann -Date: Wed Sep 24 23:08:23 2014 +0200 - - Fix build without XMP support - - https://bugzilla.gnome.org/show_bug.cgi?id=737213 - - src/eog-properties-dialog.c | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 1aee8c3c8fd28c7508fb80730fb436ef35bae9ba -Author: Pawan Chitrakar -Date: Tue Sep 23 18:00:30 2014 +0000 - - Updated Nepali translation - - po/ne.po | 1821 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---- - 1 file changed, 1703 insertions(+), 118 deletions(-) - -commit 7c2c2a055c43fbf076d21093231d469723012a60 -Author: Pawan Chitrakar -Date: Tue Sep 23 17:58:28 2014 +0000 - - Updated Nepali translation - - po/ne.po | 1821 ++++---------------------------------------------------------- - 1 file changed, 118 insertions(+), 1703 deletions(-) - -commit f1a4e22eac94e5f631a5c742c83b49cae8f6a764 -Author: Pawan Chitrakar -Date: Tue Sep 23 16:17:53 2014 +0000 - - Updated Nepali translation - - po/ne.po | 1912 ++++++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 1291 insertions(+), 621 deletions(-) - -commit 1a206147303e3a97262009dfd1458cd59719c843 -Author: Felix Riemann -Date: Mon Sep 22 21:35:33 2014 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 47761d2f2bbf613735c82f16e923cbd57397d975 -Author: Felix Riemann -Date: Mon Sep 22 21:30:48 2014 +0200 - - Prepare for release 3.14.0 - - NEWS | 7 +++++++ - configure.ac | 4 ++-- - 2 files changed, 9 insertions(+), 2 deletions(-) - -commit 095f248df4cdcc43c58f16266699f47f16156293 -Author: Jiri Grönroos -Date: Wed Sep 17 17:46:23 2014 +0300 - - Finnish translation update - - po/fi.po | 572 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 291 insertions(+), 281 deletions(-) - -commit 45ce3825200c8d58ab89f83279a10d560ab00a59 -Author: Felix Riemann -Date: Mon Sep 15 21:01:21 2014 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 5c765d4313ff29ca4583f8c9375c8ce5eb329a02 -Author: Felix Riemann -Date: Mon Sep 15 20:58:11 2014 +0200 - - Prepare for release 3.13.92 - - NEWS | 13 +++++++++++++ - configure.ac | 2 +- - 2 files changed, 14 insertions(+), 1 deletion(-) - -commit 823f2a21f21d2614aab7e03858246918df43ec90 -Author: Changwoo Ryu -Date: Sun Sep 14 05:09:54 2014 +0900 - - Updated Korean translation - - help/ko/figures/eog_save_as_window.png | Bin 41201 -> 0 bytes - help/ko/figures/eog_start_window.png | Bin 15064 -> 0 bytes - help/ko/figures/eog_toolbar_editor_window.png | Bin 30023 -> 0 bytes - help/ko/ko.po | 3814 +++++++++++++++---------- - po/ko.po | 251 +- - 5 files changed, 2398 insertions(+), 1667 deletions(-) - -commit 496041fda8b7aa147d8da5c99c2798ce499b2478 -Author: Piotr Drąg -Date: Wed Sep 10 15:33:41 2014 +0200 - - Fix tags in Finnish help translation - - help/fi/fi.po | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit fc60934d2d9808fc1d0896a68ec8b7cd40d34ef3 -Author: Ivaylo Valkov -Date: Sun Sep 7 17:43:12 2014 +0300 - - Updated Bulgarian translation. - - po/bg.po | 810 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 452 insertions(+), 358 deletions(-) - -commit dd944862eafd20c5ce600448fd11a4fef071a6ac -Author: Vadim Rutkovsky -Date: Thu Sep 4 13:34:12 2014 +0200 - - tests: remove zh_CN locale from screenshot tour - - Continuous doesn't have required fonts installed, so test fails - - tests/screenshot_tour.feature | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -commit ac5adfd5c70e1425551504d0fcb7060fd845bbfb -Author: Felix Riemann -Date: Mon Aug 18 22:41:31 2014 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 3882fad38adf0de55b4d04d97b182514dfafef21 -Author: Felix Riemann -Date: Mon Aug 18 22:38:35 2014 +0200 - - Prepare for release 3.13.90 - - NEWS | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - -commit 802c5b9da893ca7c31cafa17566badaafc00f986 -Author: Felix Riemann -Date: Sun Aug 17 17:15:41 2014 +0200 - - Raise version number to 3.13.90 - - Schedule says that version is already up. We missed a release it seems. - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c5d4eadb0b4e3de979352a86f866f4b4768c5d21 -Merge: 89c16b86 4cbd2d31 -Author: Felix Riemann -Date: Wed Aug 13 21:05:03 2014 +0200 - - Merge branch 'gestures' - - https://bugzilla.gnome.org/show_bug.cgi?id=730656 - -commit 89c16b8691de8afd06ce897f95b0eff215db6e6e -Author: MarMav -Date: Wed Aug 13 13:09:47 2014 +0000 - - Updated Greek translation - - po/el.po | 599 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 303 insertions(+), 296 deletions(-) - -commit 4cbd2d31b36f901fb814c5c7757963f37f9ff8e5 -Author: Carlos Garnacho -Date: Mon May 19 14:40:54 2014 +0200 - - EogWindow: Handle EogScrollView next/previous image signals - - src/eog-window.c | 22 ++++++++++++++++++++++ - 1 file changed, 22 insertions(+) - -commit e0378a811508ae1d0ba01fe405ef711e04dbb16c -Author: Carlos Garnacho -Date: Mon May 19 14:38:14 2014 +0200 - - EogScrollView: Add next/previous image signals - - Those are triggered by a pan gesture. If the scrollview is not scrollable - horizontally, and a horizontal pan gesture happens, next/prev signals are - emitted on the view. Vertical panning can still trigger scrolling or DnD. - - src/eog-scroll-view.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++ - src/eog-scroll-view.h | 2 ++ - 2 files changed, 95 insertions(+) - -commit bb61625f073d83fad937618bfe30c078a96b4c7f -Author: Carlos Garnacho -Date: Wed Aug 13 13:26:54 2014 +0200 - - EogWindow: Handle EogScrollView rotation-changed signal - - This makes sure the undo stack gets properly modified, as it happens when - clicking the "rotate" buttons in the UI. - - src/eog-window.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - -commit bce2efce8dfbcd4baaf255331b4722c8dcba297d -Author: Carlos Garnacho -Date: Mon May 5 20:17:43 2014 +0200 - - EogScrollView: add image rotation gesture/signal - - A ::rotation-changed signal has been added to EogScrollView, that reports - angle changes happening from within the view in 90 degree steps. A - GtkGestureRotate has been hooked to the widget so two-finger touchscreen - interaction does rotate the image. - - In order to avoid unintended angle changes when the delta is too close to - a switch point, there is a "grey area" threshold that makes it harder to - switch forth and back again. - - This gesture has been added to the same group than the GtkGestureZoom, - as both are meant to share sequences and state. - - src/eog-scroll-view.c | 133 ++++++++++++++++++++++++++++++++++++++++++++++++++ - src/eog-scroll-view.h | 1 + - 2 files changed, 134 insertions(+) - -commit 32f09f732470987f0ad4201ed92dfd3a528e13be -Author: Carlos Garnacho -Date: Thu Mar 27 18:27:41 2014 +0100 - - EogScrollView: Add pinch/zoom gesture - - GtkGestureZoom is used to handle 2-finger pinch/zoom gestures. - If the gesture is triggered, scrolling is cancelled, and both - zoom/offsets are controlled through the 2-sequences bounding box - and distance. - - src/eog-scroll-view.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++++-- - 1 file changed, 87 insertions(+), 2 deletions(-) - -commit 8e71e04e5fc3ffc5a2d4f9703d98f90728667d17 -Author: Daniel Șerbănescu -Date: Sun Aug 10 20:28:33 2014 +0200 - - Updated Romanian Translation - - help/Makefile.am | 2 +- - help/ro/ro.po | 4052 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 4053 insertions(+), 1 deletion(-) - -commit 61de8b684c706e1c71fc6d51bdc99601391ab029 -Author: Felix Riemann -Date: Sun Aug 10 17:19:56 2014 +0200 - - Stop using stock icons for the plugins - - plugins/fullscreen/fullscreen.plugin.desktop.in | 2 +- - plugins/reload/reload.plugin.desktop.in | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit 45ede27da2a6f28782b7a5d31b48b0f8a93005be -Author: Felix Riemann -Date: Sun Aug 10 17:13:40 2014 +0200 - - EogPreferencesDialog: Replace stock labels - - data/eog-preferences-dialog.ui | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 385e50a92d059babfff7c627079f0a5d4c03407a -Author: Felix Riemann -Date: Sun Aug 10 17:11:56 2014 +0200 - - EogImagePropertiesDialog: Fix stock icons and container structure - - This removes the used stock icons and switches to standard icons. - Also several odd container structures are cleaned up. - - data/eog-image-properties-dialog.ui | 470 +++++++++++++++--------------------- - src/eog-properties-dialog.c | 42 +++- - 2 files changed, 226 insertions(+), 286 deletions(-) - -commit 00641d24f94fd69c033d41c9314eec9a9f269f17 -Author: Felix Riemann -Date: Sun Aug 10 15:20:52 2014 +0200 - - Replace remaining uses of margin-left and margin-right properties - - Replaced with margin-start and margin-end, which should make - EogMetadataSidebar's layout in RTL environments more similar to the - LTR layout. - - src/eog-metadata-sidebar.c | 6 +++--- - src/eog-statusbar.c | 4 ++-- - 2 files changed, 5 insertions(+), 5 deletions(-) - -commit d53d813e7f99ce2cf85e4d79531f9fbd7042ab83 -Author: Jiro Matsuzawa -Date: Sun Aug 3 14:57:57 2014 +0900 - - l10n: Update Japanese translation - - po/ja.po | 164 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 83 insertions(+), 81 deletions(-) - -commit 511f0a7ab95ea7425ea4702512203e5147d4e093 -Author: Vadim Rutkovsky -Date: Mon Jul 28 20:11:18 2014 +0200 - - tests: trap exceptions in before_tag - - tests/environment.py | 13 ++++++++----- - 1 file changed, 8 insertions(+), 5 deletions(-) - -commit c950a6c5205c88b817f021dc73ee82ce78f6b526 -Author: Vadim Rutkovsky -Date: Mon Jul 28 11:38:11 2014 +0200 - - tests: merge screenshot tour tests - - Makefile.am | 2 +- - tests/screenshot_tour.feature | 22 +++------------------- - 2 files changed, 4 insertions(+), 20 deletions(-) - -commit 1dc3d06a51bfede953cfb11a81590592e17ae242 -Author: Vadim Rutkovsky -Date: Sun Jul 27 15:51:11 2014 +0200 - - tests: give nice name for screenshot tests and add more locales - - Makefile.am | 2 +- - tests/screenshot_tour.feature | 54 ++++++++++++++++++++++++++++++++----------- - 2 files changed, 42 insertions(+), 14 deletions(-) - -commit 692758c64e242563222386cbc12b4fddc47f44e8 -Author: Vadim Rutkovsky -Date: Fri Jul 25 08:02:24 2014 +0200 - - tests: don't inlude pointer in screenshots - - tests/environment.py | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d52f34e60574eb7ec0b62b01d869df7e25f305d8 -Author: Vadim Rutkovsky -Date: Thu Jul 24 16:44:20 2014 +0200 - - tests: add screenshot tour test - - This would help designers to check app looks (see screenshots - in installed-tests/eog_screenshots) and translators - - Makefile.am | 2 +- - tests/environment.py | 35 +++++++++++++++++++++++++++++++++++ - tests/screenshot_tour.feature | 41 +++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 77 insertions(+), 1 deletion(-) - -commit 2284141dfc691d1f3fb5bf3b204100714a25ff86 -Author: Vadim Rutkovsky -Date: Thu Jul 24 16:42:34 2014 +0200 - - tests: allow tests to use translations - - - Instead of looking for specified string first try to translate it to current language (set via - LANG env) - - tests/common_steps.py | 42 +++++++++++++++++++++++------ - tests/steps/steps.py | 73 +++++++++++++++++++++++++++++++++++---------------- - 2 files changed, 84 insertions(+), 31 deletions(-) - -commit eb9cf843029245a5cde2f0d185babfda62500d8f -Author: Felix Riemann -Date: Tue Jul 22 11:55:37 2014 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 759ebed19798c89bb291fe6439ef176ce1e0b5cd -Author: Felix Riemann -Date: Tue Jul 22 11:49:44 2014 +0200 - - Prepare for release 3.13.3 - - NEWS | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -commit df4d2f69de89acc900cffd62b99a38b1a09e29a0 -Author: Vadim Rutkovsky -Date: Mon Jul 21 15:00:57 2014 +0200 - - build: strip unneeded test env setting and fix test install - - m4/behave-installed-tests.m4 | 8 ++------ - 1 file changed, 2 insertions(+), 6 deletions(-) - -commit 91e9a9be0ab614b15204c720b85d4866ca163fe5 -Author: Vadim Rutkovsky -Date: Fri Jul 11 15:47:48 2014 +0200 - - build: fix typo in step definitions files list - - m4/behave-installed-tests.m4 | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 80deb4320db849a2fbb1dffd8f2b620be5b0f2d2 -Author: Vadim Rutkovsky -Date: Thu Jul 10 13:59:43 2014 +0200 - - build: include tests in release tarball - - Makefile.am | 5 +++-- - m4/behave-installed-tests.m4 | 16 ++++++++-------- - 2 files changed, 11 insertions(+), 10 deletions(-) - -commit 456074096e2bf0961d068dab226fa188f55faa46 -Author: Muhammet Kara -Date: Fri May 30 22:46:48 2014 +0000 - - Updated Turkish translation - - po/tr.po | 116 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 57 insertions(+), 59 deletions(-) - -commit 2fad22161c739ec4ff86309d51a98b8a14ba219b -Author: Felix Riemann -Date: Thu May 29 21:48:11 2014 +0200 - - Drop GtkMisc and GtkAlignment usage in eog code - - Both are deprecated and can be replaced by simple GtkWidget properties. - This leaves out the dialogs made with Glade as it doesn't have - support for the new margin-start property yet. - - configure.ac | 2 +- - src/eog-close-confirmation-dialog.c | 14 +++++++------- - src/eog-error-message-area.c | 6 +++--- - src/eog-metadata-sidebar.c | 6 ++++-- - src/eog-print-image-setup.c | 19 +++++++------------ - src/eog-window.c | 8 ++++---- - 6 files changed, 26 insertions(+), 29 deletions(-) - -commit bbf3ee63ca740d718268f30805d1018644589264 -Author: Muhammet Kara -Date: Thu May 29 00:10:18 2014 +0000 - - Updated Turkish translation - - po/tr.po | 672 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 355 insertions(+), 317 deletions(-) - -commit 3c962bd476f1911406ba5f47ddcc07788672f207 -Author: Felix Riemann -Date: Wed May 28 19:30:44 2014 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 13103861f1189aaa1e496299b84135a5b0488aa6 -Author: Felix Riemann -Date: Mon May 26 20:38:04 2014 +0200 - - Prepare for release 3.13.2 - - NEWS | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - -commit 485863e7b92f4d1cf79398ac347355c3c4d55a7b -Author: Tom Tryfonidis -Date: Mon May 12 20:34:39 2014 +0000 - - Updated Greek translation - - help/el/el.po | 224 +++++++++++++++++++++++++++++----------------------------- - 1 file changed, 113 insertions(+), 111 deletions(-) - -commit eefad8ace4ac12ac8f69b48eb8a980e113974f7e -Author: Felix Riemann -Date: Sun May 11 18:00:25 2014 +0200 - - Only export eog symbols from the private shared library - - As eog doesn't install headers for the Egg and JPEG parts these don't - need to be exported. - - src/Makefile.am | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 5e7c76ea9eb6e4577a4605fbdb62e3dc4fc64e9a -Author: Felix Riemann -Date: Sun May 11 17:28:42 2014 +0200 - - Remove private/obsolete API from reference docs - - doc/reference/eog-docs.xml.in | 16 +++--------- - doc/reference/eog-sections.txt | 57 ++++++++++++++---------------------------- - 2 files changed, 22 insertions(+), 51 deletions(-) - -commit f295f4debe455fb14b1c4cb8aff913bbb9a54597 -Author: Felix Riemann -Date: Sun May 11 17:09:41 2014 +0200 - - Split eog into executable and private shared library - - This makes the GResource migration cleaner as the resources are - logically grouped with the code using them. - - doc/reference/Makefile.am | 19 ++++++++++++++----- - plugins/Makefile.am | 13 ++++++++++--- - src/Makefile.am | 23 ++++++++++++----------- - 3 files changed, 36 insertions(+), 19 deletions(-) - -commit c991471b092433aab359ed90afc4ae678a4c2713 -Author: Carles Ferrando -Date: Fri May 9 00:07:51 2014 +0200 - - [l10n] Updated Catalan (Valencian) translation - - po/ca@valencia.po | 598 +++++++++++++++++++++++++++++------------------------- - 1 file changed, 319 insertions(+), 279 deletions(-) - -commit 377fd19596e83bee323297c9516894901422fa62 -Author: Felix Riemann -Date: Sun May 4 15:35:26 2014 +0200 - - EogPreferencesDialog: Make use of extra space when resizing dialog - - https://bugzilla.gnome.org/show_bug.cgi?id=729498 - - data/eog-preferences-dialog.ui | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 066be17db6a58b55d7c93d7bcb43c2a7fae050ad -Author: Felix Riemann -Date: Sun May 4 14:13:54 2014 +0200 - - EogApplication: Activate per-app plugins in the startup callback - - If activated in the init function the application could not be - as initialized as expected by the plugins. Also this avoids the - unneeded plugin enumeration when reusing an instance. - - https://bugzilla.gnome.org/show_bug.cgi?id=729494 - - src/eog-application.c | 58 +++++++++++++++++++++++++-------------------------- - 1 file changed, 29 insertions(+), 29 deletions(-) - -commit a2defa1d08be2367d78938a362f7a234a9166d65 -Author: Felix Riemann -Date: Sun May 4 13:24:34 2014 +0200 - - Load EogMultipleSaveAsDialog from GResource - - data/Makefile.am | 2 +- - src/eog-save-as-dialog-helper.c | 9 +-------- - src/eog.gresource.xml | 1 + - 3 files changed, 3 insertions(+), 9 deletions(-) - -commit 9a60071fb0c0adfe71cb58cb81fde6dfb035f63b -Author: Felix Riemann -Date: Sat May 3 20:27:10 2014 +0200 - - Remove EogDialog helper class - - EogDialog has become obsolete with the switch to GtkBuilder templates. - - doc/reference/eog-sections.txt | 18 ---- - src/Makefile.am | 2 - - src/eog-dialog.c | 232 ----------------------------------------- - src/eog-dialog.h | 76 -------------- - src/eog-metadata-sidebar.c | 1 - - src/eog-window.h | 1 - - 6 files changed, 330 deletions(-) - -commit f96947cf5749a78cdd3848ed8bc5e7bfe883d0b0 -Author: Felix Riemann -Date: Sat May 3 20:22:31 2014 +0200 - - EogPreferencesDialog: Convert to GtkBuilder template - - Also embed the plugin manager into the template directly. - - data/Makefile.am | 2 +- - data/eog-preferences-dialog.ui | 24 +++-- - src/eog-preferences-dialog.c | 205 +++++++++++++++++++++-------------------- - src/eog-preferences-dialog.h | 7 +- - src/eog-window.c | 4 +- - src/eog.gresource.xml | 1 + - 6 files changed, 129 insertions(+), 114 deletions(-) - -commit 94004b468f57673365a069d0654919dd9f2974a7 -Author: Felix Riemann -Date: Fri Mar 14 21:24:34 2014 +0100 - - Initial GResource migration - - Embedding UI data files as GResource makes several things easier. - The compiled resources need to be linked directly with the binary - as they won't be available if linked with the embedded libeog. - - configure.ac | 1 + - data/Makefile.am | 16 +++++++--------- - src/Makefile.am | 8 +++++++- - src/eog-application.c | 10 +++++++--- - src/eog-properties-dialog.c | 7 ++----- - src/eog-window.c | 6 +++--- - src/eog.gresource.xml | 11 +++++++++++ - 7 files changed, 38 insertions(+), 21 deletions(-) - -commit a8343a6c56d8c0df225657f62e0011e694abae5f -Author: Felix Riemann -Date: Wed Mar 12 21:15:42 2014 +0100 - - EogPropertiesDialog: Convert to GtkBuilder template - - data/eog-image-properties-dialog.ui | 11 +- - src/eog-metadata-sidebar.c | 4 +- - src/eog-properties-dialog.c | 222 +++++++++++++++++++++--------------- - src/eog-properties-dialog.h | 9 +- - src/eog-window.c | 10 +- - src/eog-window.h | 2 +- - 6 files changed, 149 insertions(+), 109 deletions(-) - -commit b4d044366f94e55aed51622f281eb2a0497e47e6 -Author: Sami Jaktholm -Date: Thu May 1 14:15:02 2014 +0300 - - Finnish help translation - - help/fi/fi.po | 4508 ++++++++++++++++++++++++++++++++++++++++----------------- - 1 file changed, 3145 insertions(+), 1363 deletions(-) - -commit 281fde73c4150ed18c9bbc67455f485c3ffcff13 -Author: Felix Riemann -Date: Mon Apr 28 23:38:08 2014 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 4eb910e4a6db5f7e03a40eb1ae98d7ca1bbc97e9 -Author: Felix Riemann -Date: Mon Apr 28 23:35:58 2014 +0200 - - Prepare for release 3.13.1 - - NEWS | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - -commit ed8e8838cd07fb0bb6d97b76e1e0cf093d4559dd -Author: Felix Riemann -Date: Mon Apr 28 23:22:07 2014 +0200 - - Update installed tests to work with latest GtkFileChooser - - The location entry is shown differently now and apparently there is - also a slightly longer timeout needed until one can press Enter. - - https://bugzilla.gnome.org/show_bug.cgi?id=727989 - - tests/common_steps.py | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 847fc70b24fdd7c5f276f41f0f3db755918e2221 -Author: Vadim Rutkovsky -Date: Thu Apr 10 18:14:13 2014 +0200 - - Install tests using --enable-installed-tests switch - - Makefile.am | 4 ++ - configure.ac | 5 ++ - m4/behave-installed-tests.m4 | 137 +++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 146 insertions(+) - -commit 8dffb2f1c34c25ccfd48c2a45acd035e386e7ace -Author: Vadim Rutkovsky -Date: Thu Apr 10 18:13:19 2014 +0200 - - Add initial installed tests - - tests/actions.feature | 67 ++++++++++++++ - tests/common_steps.py | 245 ++++++++++++++++++++++++++++++++++++++++++++++++++ - tests/environment.py | 47 ++++++++++ - tests/gnome-logo.png | Bin 0 -> 11104 bytes - tests/steps/steps.py | 131 +++++++++++++++++++++++++++ - 5 files changed, 490 insertions(+) - -commit c9cfd7c85836a19b07d9edfca47692fd2f694e89 -Author: Rune Karlsson -Date: Mon Apr 28 20:29:25 2014 +0000 - - Updated Swedish translation - - po/sv.po | 948 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 541 insertions(+), 407 deletions(-) - -commit 11e586fc01a6023c68a35333b60535239c83bc2c -Author: Matthias Clasen -Date: Sat Apr 26 11:08:45 2014 -0400 - - Drop gnome-icon-theme dependency - - gnome-icon-theme got renamed to adwaita-icon-theme. And the - dependency is not really needed; depending on GTK+ should be - enough to guarantee the presence of a spec-compliant icon - theme. - - https://bugzilla.gnome.org/show_bug.cgi?id=729018 - - configure.ac | 2 -- - 1 file changed, 2 deletions(-) - -commit 48e971cbccc35b43e351fbefb41c4a54246b47ac -Author: Felix Riemann -Date: Wed Apr 2 22:10:24 2014 +0200 - - EogImage: Check GdkPixbuf for an ICC profile before falling back to sRGB - - If an image's ICC profile cannot be extracted check whether GdkPixbuf - was able to extract one before falling back to sRGB. This makes it - possible to color correct TIFF images. - - https://bugzilla.gnome.org/show_bug.cgi?id=727467 - - src/eog-image.c | 30 ++++++++++++++++++++++++++---- - 1 file changed, 26 insertions(+), 4 deletions(-) - -commit 7d1ec24210694cdb5a97f700c82e05c4e8e5f313 -Author: Felix Riemann -Date: Sat Apr 26 18:16:22 2014 +0200 - - Post-branch version bump - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit ac5b75adb67bb7de194d0f88382572e469c165d5 -Author: Felix Riemann -Date: Mon Apr 14 21:46:26 2014 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8081aae2e717875cabfc390a0e0b8d649bc79ac6 -Author: Felix Riemann -Date: Mon Apr 14 21:43:55 2014 +0200 - - Prepare for release 3.12.1 - - NEWS | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - -commit c118b3541d88d08723a174863217433076b08954 -Author: Dirgita -Date: Thu Apr 10 05:49:58 2014 +0000 - - Updated Indonesian translation - - po/id.po | 357 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 180 insertions(+), 177 deletions(-) - -commit 980dfbc2458a43c95df1c24c3ee5e6c4269f9485 -Author: Alexandre Franke -Date: Wed Apr 9 13:49:12 2014 +0000 - - Updated French translation - - help/fr/fr.po | 83 +++++++++++++++++++++++++++-------------------------------- - 1 file changed, 38 insertions(+), 45 deletions(-) - -commit 36307a7013c33163a4eb13a3d30568a2fc07984a -Author: Gábor Kelemen -Date: Wed Apr 2 14:26:54 2014 +0000 - - Updated Hungarian translation - - help/hu/hu.po | 110 ++++++++++++++++++++++++++-------------------------------- - 1 file changed, 49 insertions(+), 61 deletions(-) - -commit ca87a86da4bfe699ad1fc173c66538eb460d75ad -Author: Gabor Kelemen -Date: Wed Apr 2 16:01:20 2014 +0200 - - Better Hungarian help screenshots, w/o residual English text - - help/hu/figures/multiple-convert.png | Bin 35272 -> 35665 bytes - help/hu/figures/multiple-rename-count.png | Bin 35985 -> 36264 bytes - 2 files changed, 0 insertions(+), 0 deletions(-) - -commit ddb5b92cd37480e35030f2ea3e788e2b38b99afa -Author: Marek Černocký -Date: Wed Apr 2 15:32:31 2014 +0200 - - Updated Czech translation - - help/cs/cs.po | 74 +++++++++++++++++++---------------------------------------- - 1 file changed, 23 insertions(+), 51 deletions(-) - -commit cde05f0fea2af2cfbee28bd595915b2884bb3398 -Author: Gabor Kelemen -Date: Wed Apr 2 13:23:23 2014 +0200 - - Improve phrasing of Hungarian translation - - po/hu.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 1d2743cd4d7135ce5a5c5cb47046693a1502f48e -Author: Daniel Mustieles -Date: Wed Apr 2 13:01:13 2014 +0200 - - Updated Spanish translation - - help/es/es.po | 94 ++++++++++++++++++++++++++--------------------------------- - 1 file changed, 41 insertions(+), 53 deletions(-) - -commit defccd488531623fd0f4697e178a62ce08a39cc5 -Author: Gabor Kelemen -Date: Wed Apr 2 02:52:11 2014 +0200 - - Mark user visible strings for translation - - data/eog-multiple-save-as-dialog.ui | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit ade79ca56d900577cbd26ac4425409df9c7545ec -Author: Gabor Kelemen -Date: Wed Apr 2 02:51:27 2014 +0200 - - Mark images as not translatable to keep them off translators radar - - help/C/index.page | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -commit d43a8d3d3c8e9beac7df4bf987dbbdecf25097ec -Author: Balázs Úr -Date: Tue Apr 1 14:58:06 2014 +0200 - - Added localized picture - - help/hu/figures/multiple-convert.png | Bin 0 -> 35272 bytes - help/hu/figures/multiple-rename-count.png | Bin 0 -> 35985 bytes - help/hu/figures/plugins-all.png | Bin 98865 -> 98783 bytes - 3 files changed, 0 insertions(+), 0 deletions(-) - -commit 73d050017827081a0838afa54af5fdcb916d1567 -Author: Ikuya Awashiro -Date: Tue Apr 1 07:16:15 2014 +0900 - - l10n: Update Japanese translation - - po/ja.po | 11 +++++------ - 1 file changed, 5 insertions(+), 6 deletions(-) - -commit 2c991e02eeb889b6bc617ff1c1e8be555fa8d43e -Author: Balázs Úr -Date: Fri Mar 28 22:53:08 2014 +0100 - - Added localized pictures - - help/hu/figures/eog-toolbar-editor.png | Bin 0 -> 34611 bytes - help/hu/figures/image-view-prefs.png | Bin 0 -> 35969 bytes - help/hu/figures/plugin-send-by-mail.png | Bin 0 -> 67543 bytes - help/hu/figures/plugins-all.png | Bin 0 -> 98865 bytes - help/hu/figures/prefs-plugins-date.png | Bin 0 -> 35556 bytes - help/hu/figures/prefs-plugins-fullscreen.png | Bin 0 -> 35495 bytes - help/hu/figures/prefs-plugins.png | Bin 0 -> 34333 bytes - help/hu/figures/slideshow-prefs.png | Bin 0 -> 26947 bytes - 8 files changed, 0 insertions(+), 0 deletions(-) - -commit 675bf9f3b6e8dc68354aac33622866f8a0fed0c9 -Author: Peter Vágner -Date: Tue Mar 25 18:02:31 2014 +0100 - - Updated slovak translation - - po/sk.po | 646 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 342 insertions(+), 304 deletions(-) - -commit 1c550a264a293e868e029724c3d0ae634fc3638d -Author: Felix Riemann -Date: Mon Mar 24 23:09:27 2014 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a2a36f0ac3fa7c05abcdc57b179935d778febd70 -Author: Felix Riemann -Date: Mon Mar 24 23:07:13 2014 +0100 - - Prepare for release 3.12.0 - - NEWS | 18 ++++++++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 20 insertions(+), 2 deletions(-) - -commit b37d2c05eb9528f0e42df9235ef4f1fd7af9b6f0 -Author: Daniel Mustieles -Date: Mon Mar 24 16:28:17 2014 +0100 - - Updated Spanish translation - - help/es/es.po | 1539 +++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 948 insertions(+), 591 deletions(-) - -commit 8e9b275a4ae4f64f5106c0b49b859eebc665cce9 -Author: Jiro Matsuzawa -Date: Mon Mar 24 22:56:39 2014 +0900 - - l10n: Update Japanese translation - - po/ja.po | 619 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 323 insertions(+), 296 deletions(-) - -commit 041a2979ac42049c66fa4d161678f60a6d698b27 -Author: Alexandre Franke -Date: Mon Mar 24 12:58:33 2014 +0000 - - Updated French translation - - help/fr/fr.po | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 7f6f31b8a040e6fb06961ecd46f49d21f78d6892 -Author: Gábor Kelemen -Date: Sun Mar 23 20:26:20 2014 +0000 - - Updated Hungarian translation - - help/hu/hu.po | 1531 +++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 942 insertions(+), 589 deletions(-) - -commit 34ccc5ba2854ffe725403d069ec78adc05a79d2b -Author: Marek Černocký -Date: Sun Mar 23 21:23:50 2014 +0100 - - Updated Czech translation - - help/cs/cs.po | 1480 ++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 935 insertions(+), 545 deletions(-) - -commit 6d3f978dd3a91055641a474365a09ff1ee355436 -Author: Andre Klapper -Date: Sun Mar 23 21:19:28 2014 +0100 - - User docs: Make page ID the same as file name - - help/C/bug-filing.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 2153a47449c1f6ea3578a77197f0d1ac5475aff0 -Author: Andre Klapper -Date: Sun Mar 23 21:18:57 2014 +0100 - - User docs: Fix 404 link - - help/C/develop.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d6cb9eef310e21d584884485a093f5d6b73b4b02 -Author: Inaki Larranaga Murgoitio -Date: Fri Mar 21 17:49:53 2014 +0100 - - Updated Basque language - - po/eu.po | 634 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 337 insertions(+), 297 deletions(-) - -commit 8d5808b28e5fd6c488f5c0423550a6d2ec4cfc77 -Author: Kenneth Nielsen -Date: Thu Mar 20 22:13:14 2014 +0100 - - Updated Danish translation - - po/da.po | 631 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 335 insertions(+), 296 deletions(-) - -commit 29bbef5157e24aff955385d24d475a2b07ebbe4f -Author: Gábor Kelemen -Date: Wed Mar 19 14:25:50 2014 +0000 - - Updated Hungarian translation - - po/hu.po | 644 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 344 insertions(+), 300 deletions(-) - -commit 8c0db41f62e5a67c1392f9538af5260dce4cac70 -Author: Gianvito Cavasoli -Date: Wed Mar 19 07:32:31 2014 +0000 - - Updated Italian translation - - po/it.po | 649 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 347 insertions(+), 302 deletions(-) - -commit 1d345b37e20d95a4d07e63a0d3f549c493490676 -Author: Felix Riemann -Date: Mon Mar 17 19:21:36 2014 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 00ba1eb25e5d1eacaf06272569a68ea3e5b43226 -Author: Felix Riemann -Date: Mon Mar 17 19:18:41 2014 +0100 - - Prepare for release 3.11.92 - - NEWS | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - -commit 6d65156c899e0c49c2c9e12a38178087c457a26c -Author: Мирослав Николић -Date: Sun Mar 16 14:22:31 2014 +0100 - - Updated Serbian translation - - po/sr.po | 696 ++++++++++++++++++++++++++++++--------------------------- - po/sr@latin.po | 696 ++++++++++++++++++++++++++++++--------------------------- - 2 files changed, 724 insertions(+), 668 deletions(-) - -commit 8595a9588316a731c6e58984710617f178899ac1 -Author: Frédéric Péters -Date: Sun Mar 16 13:30:30 2014 +0100 - - Update French translation - - help/fr/fr.po | 1783 ++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 1006 insertions(+), 777 deletions(-) - -commit 0be5fdeeaeeb17727b0b812aa8a4224132031d29 -Author: Claude Paroz -Date: Sat Mar 15 16:37:24 2014 +0000 - - Updated French translation - - po/fr.po | 638 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 336 insertions(+), 302 deletions(-) - -commit 202ac1a64f2dd851157d51ca90c1240b8eb3faec -Author: Felix Riemann -Date: Sat Mar 15 12:30:32 2014 +0100 - - EogWindow: Indentation fix - - src/eog-window.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit e9cb288b025af3da24315f2b5724fa3bf388650b -Author: Felipe Ortiz -Date: Sat Mar 15 12:24:16 2014 +0100 - - EogWindow: Also update window title after saving - - Makes the window title match the displayed image's filename again. - - https://bugzilla.gnome.org/show_bug.cgi?id=720340 - - src/eog-window.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit 3733fcf078dc614f0596624c68d51f55f7710fbb -Author: Wolfgang Stöggl -Date: Thu Mar 13 21:10:56 2014 +0000 - - Updated German translation - - po/de.po | 643 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 345 insertions(+), 298 deletions(-) - -commit c69d92352aedf19879ce9c3f4e3058f9fdcc7b1e -Author: Tiagosdot -Date: Wed Mar 12 22:57:06 2014 +0000 - - Updated Portuguese translation - - po/pt.po | 641 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 341 insertions(+), 300 deletions(-) - -commit 4221e41defb4a54a7fc35ddb2718db7ae9a5790b -Author: Felix Riemann -Date: Wed Mar 12 19:37:11 2014 +0100 - - EogPropertiesDialog: Remove unused private members - - src/eog-properties-dialog.c | 5 +---- - 1 file changed, 1 insertion(+), 4 deletions(-) - -commit 4feef2c24f36c5dcb3f20c56f3480ec82ab2aab0 -Author: Paweł Żołnowski -Date: Wed Mar 12 19:28:06 2014 +0100 - - Updated Polish translation - - po/pl.po | 634 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 336 insertions(+), 298 deletions(-) - -commit b9edcabd0956d77668f29ff28f4cd160bf870cb4 -Author: Yuri Myasoedov -Date: Mon Mar 10 12:47:30 2014 +0400 - - Updated Russian translation - - po/ru.po | 909 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 517 insertions(+), 392 deletions(-) - -commit 150774dfb75370f0bc07158c98f62201e9cbc821 -Author: A S Alam -Date: Fri Mar 7 20:35:53 2014 -0600 - - update Punjabi Translation 07March2014: Alam - - po/pa.po | 656 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 343 insertions(+), 313 deletions(-) - -commit 7c6d6ca1d86b7f2ca8ab7345d7ef45e393c75814 -Author: Rūdolfs Mazurs -Date: Fri Mar 7 23:31:09 2014 +0200 - - Updated Latvian translation - - po/lv.po | 637 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 341 insertions(+), 296 deletions(-) - -commit 848c74992bac153a68b62668c56b334b94c2d84a -Author: Changwoo Ryu -Date: Wed Mar 5 20:19:22 2014 +0900 - - Updated Korean translation - - po/ko.po | 623 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 327 insertions(+), 296 deletions(-) - -commit 372bdb200744fa51d16c4c7a0209edc60e22d077 -Author: Felix Riemann -Date: Mon Mar 3 23:30:57 2014 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 3868afbcd9e9d2abf3cdd48cabc25640be29c64a -Author: Felix Riemann -Date: Mon Mar 3 23:28:11 2014 +0100 - - Prepare for release 3.11.91 - - NEWS | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - -commit 80b536bcd2f08f314e10f47d3689283c7ae577a6 -Author: pdknsk -Date: Mon Mar 3 22:58:16 2014 +0100 - - Allow color correcting images with alpha channel - - This is mostly useful for PNG images for now but could also help - with TIFF files in the future. LittleCMS will still ignore the - alpha channel, so this should be harmless. - - https://bugzilla.gnome.org/show_bug.cgi?id=725357 - - src/eog-image.c | 19 +++++++++---------- - 1 file changed, 9 insertions(+), 10 deletions(-) - -commit dfdc1874b09e06d47369d33c2b6bad9f0d664c5c -Author: pdknsk -Date: Mon Mar 3 22:46:19 2014 +0100 - - Assume sRGB when image doesn't have an ICC profile attached - - This seems to be no problem with other image viewers and - is apparently also recommended by W3C. - - https://bugzilla.gnome.org/show_bug.cgi?id=554498 - - src/eog-image.c | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - -commit 1b0fb6b3e06bd2cc8e8055c0847d75311685f7c9 -Author: Felix Riemann -Date: Fri Feb 28 22:52:56 2014 +0100 - - EogMetadataDetails: Improve fractional GPS coordinates support - - Increase displayed coordinate resolution for Exif GPS coordinates that - use fractional degrees for minutes or fractional minutes for seconds. - - https://bugzilla.gnome.org/show_bug.cgi?id=725416 - - src/eog-metadata-details.c | 31 +++++++++++++++++++++++++------ - 1 file changed, 25 insertions(+), 6 deletions(-) - -commit 4519bc5d91b6fd60c9ab864d697a96fb155c7f80 -Author: Pau Iranzo -Date: Wed Feb 26 00:04:56 2014 +0100 - - [l10n] Update Catalan translation - - po/ca.po | 644 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 342 insertions(+), 302 deletions(-) - -commit 603e8b95a348e00cac2e66fca301133708ec61e5 -Author: Sandeep Shedmake -Date: Tue Feb 25 12:28:19 2014 +0000 - - Updated Marathi translation - - po/mr.po | 1941 +++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 1240 insertions(+), 701 deletions(-) - -commit de94d959ef2c435da8152cc227162cf8d0d6d123 -Author: Ihar Hrachyshka -Date: Sun Feb 23 21:56:19 2014 +0100 - - Updated Belarusian translation. - - po/be.po | 634 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 335 insertions(+), 299 deletions(-) - -commit bf3350aa517c2253ce270667c50846da47860dbc -Author: Andika Triwidada -Date: Sat Feb 22 03:33:12 2014 +0000 - - Updated Indonesian translation - - po/id.po | 641 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 338 insertions(+), 303 deletions(-) - -commit 007e5ab0731837f3e088ab678ca0e495fbdedc0f -Author: Felix Riemann -Date: Mon Feb 17 19:44:15 2014 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 61deddcb6aec7be497559de890d5ef11e30d4ab0 -Author: Felix Riemann -Date: Mon Feb 17 19:41:06 2014 +0100 - - Prepare for release 3.11.90 - - NEWS | 26 ++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 27 insertions(+), 1 deletion(-) - -commit ddb647a0fe91e59076f37cfb5db01285fec50f17 -Author: ngoswami -Date: Tue Feb 11 13:19:25 2014 +0000 - - Updated Assamese translation - - po/as.po | 667 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 349 insertions(+), 318 deletions(-) - -commit 61566c4048d74df264969166f3175b8db5dff9f3 -Author: Daniel Korostil -Date: Mon Feb 10 23:52:55 2014 +0200 - - Updated Ukrainian translation - - po/uk.po | 652 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 350 insertions(+), 302 deletions(-) - -commit 0fe52fb2817ab7af3fce5d1d1d1d7268d19b7916 -Author: Khaled Hosny -Date: Thu Feb 6 15:53:08 2014 +0200 - - Update Arabic translation - - po/ar.po | 635 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 334 insertions(+), 301 deletions(-) - -commit be3689eb49cdd2b8cd810a7f6eb5b6c7318108f1 -Author: Rober Ancell -Date: Wed Jan 15 15:44:59 2014 +1300 - - Use unity-control-center if in Unity - - src/eog-window.c | 17 +++++++++++++---- - 1 file changed, 13 insertions(+), 4 deletions(-) - -commit 1d0681aa1afa3af10bd1bd805443906ebfd71573 -Author: Yosef Or Boczko -Date: Wed Feb 5 20:23:01 2014 +0100 - - EogWindow: Fix the undo icon in RTL - - https://bugzilla.gnome.org/show_bug.cgi?id=723546 - - src/eog-window.c | 3 +++ - 1 file changed, 3 insertions(+) - -commit 54635a542a89bbb00de3cfee9f5bf325c1f39608 -Author: Yosef Or Boczko -Date: Mon Feb 3 19:22:38 2014 +0200 - - EogWindow: Fix the previous and the next icons in RTL - - https://bugzilla.gnome.org/show_bug.cgi?id=723544 - - src/eog-window.c | 5 +++++ - 1 file changed, 5 insertions(+) - -commit ce1610c862dbeab80227e426a8da582f7e39ffff -Author: Theppitak Karoonboonyanan -Date: Wed Feb 5 17:00:45 2014 +0700 - - Updated Thai translation - - po/th.po | 642 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 340 insertions(+), 302 deletions(-) - -commit 41d46a1a4fe02601c93cc466950442264cbf333f -Author: GunChleoc -Date: Tue Feb 4 14:53:31 2014 +0000 - - Updated Scottish Gaelic translation - - po/gd.po | 981 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 569 insertions(+), 412 deletions(-) - -commit f1ce40c6039b8ea874f3eabe7ae118e8cecc3b0e -Author: Rafael Ferreira -Date: Sun Feb 2 01:29:00 2014 +0000 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 38 +++++++++++++++++++------------------- - 1 file changed, 19 insertions(+), 19 deletions(-) - -commit d4418178f012536d1a3de6ff67a02d3323c7b13e -Author: Chao-Hsiung Liao -Date: Fri Jan 31 23:03:52 2014 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 659 ++++++++++++++++++++++++++++++----------------------------- - po/zh_TW.po | 663 +++++++++++++++++++++++++++++++----------------------------- - 2 files changed, 692 insertions(+), 630 deletions(-) - -commit b6ff8d5c9c574d65693c5337dffe8b65724d591a -Author: Daniel Mustieles -Date: Fri Jan 31 15:00:35 2014 +0100 - - Revert "Updated FSF's address" - - This reverts commit 7703d5b1298061008afe7aa1c76cd83e0ee9a14e. - - po/ar.po | 8 +++++++- - po/ast.po | 7 ++++++- - po/be@latin.po | 8 +++++++- - po/bn.po | 3 ++- - po/bn_IN.po | 7 ++++++- - po/br.po | 2 +- - po/da.po | 7 ++++++- - po/dz.po | 2 +- - po/en@shaw.po | 7 ++++++- - po/en_GB.po | 7 ++++++- - po/es.po | 3 ++- - po/fa.po | 3 ++- - po/fur.po | 3 ++- - po/fy.po | 3 ++- - po/gl.po | 7 ++++++- - po/he.po | 7 ++++++- - po/hr.po | 3 ++- - po/kk.po | 7 ++++++- - po/kn.po | 7 ++++++- - po/ks.po | 3 ++- - po/ku.po | 3 ++- - po/lv.po | 7 ++++++- - po/mai.po | 3 ++- - po/mk.po | 7 ++++++- - po/ml.po | 7 ++++++- - po/mr.po | 7 ++++++- - po/my.po | 3 ++- - po/nds.po | 2 +- - po/ne.po | 3 ++- - po/nn.po | 7 ++++++- - po/oc.po | 7 ++++++- - po/or.po | 7 ++++++- - po/pa.po | 3 ++- - po/ps.po | 2 +- - po/pt.po | 3 ++- - po/ro.po | 8 +++++++- - po/si.po | 3 ++- - po/sq.po | 3 ++- - po/sv.po | 7 ++++++- - po/ta.po | 3 ++- - po/te.po | 7 ++++++- - po/th.po | 7 ++++++- - po/tr.po | 3 ++- - po/ug.po | 3 ++- - po/uk.po | 7 ++++++- - po/uz.po | 2 +- - po/uz@cyrillic.po | 2 +- - po/vi.po | 3 ++- - po/zh_CN.po | 3 ++- - 49 files changed, 187 insertions(+), 49 deletions(-) - -commit 7703d5b1298061008afe7aa1c76cd83e0ee9a14e -Author: Daniel Mustieles -Date: Thu Jan 23 12:49:19 2014 +0100 - - Updated FSF's address - - po/ar.po | 8 +------- - po/ast.po | 7 +------ - po/be@latin.po | 8 +------- - po/bn.po | 3 +-- - po/bn_IN.po | 7 +------ - po/br.po | 2 +- - po/da.po | 7 +------ - po/dz.po | 2 +- - po/en@shaw.po | 7 +------ - po/en_GB.po | 7 +------ - po/es.po | 3 +-- - po/fa.po | 3 +-- - po/fur.po | 3 +-- - po/fy.po | 3 +-- - po/gl.po | 7 +------ - po/he.po | 7 +------ - po/hr.po | 3 +-- - po/kk.po | 7 +------ - po/kn.po | 7 +------ - po/ks.po | 3 +-- - po/ku.po | 3 +-- - po/lv.po | 7 +------ - po/mai.po | 3 +-- - po/mk.po | 7 +------ - po/ml.po | 7 +------ - po/mr.po | 7 +------ - po/my.po | 3 +-- - po/nds.po | 2 +- - po/ne.po | 3 +-- - po/nn.po | 7 +------ - po/oc.po | 7 +------ - po/or.po | 7 +------ - po/pa.po | 3 +-- - po/ps.po | 2 +- - po/pt.po | 3 +-- - po/ro.po | 8 +------- - po/si.po | 3 +-- - po/sq.po | 3 +-- - po/sv.po | 7 +------ - po/ta.po | 3 +-- - po/te.po | 7 +------ - po/th.po | 7 +------ - po/tr.po | 3 +-- - po/ug.po | 3 +-- - po/uk.po | 7 +------ - po/uz.po | 2 +- - po/uz@cyrillic.po | 2 +- - po/vi.po | 3 +-- - po/zh_CN.po | 3 +-- - 49 files changed, 49 insertions(+), 187 deletions(-) - -commit a1b150c0d252c015f5d8ada084a4fed2e36a3eaf -Author: Aurimas Černius -Date: Sat Jan 25 22:22:27 2014 +0200 - - Updated Lithuanian translation - - po/lt.po | 648 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 344 insertions(+), 304 deletions(-) - -commit 62e10d895bccdcdba2ba61d31ec13ed7dc5df57b -Author: Yosef Or Boczko -Date: Sat Jan 25 21:15:43 2014 +0200 - - Updated Hebrew translation - - po/he.po | 64 +++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 35 insertions(+), 29 deletions(-) - -commit 4ecc1d1e5c480b124f2794127a231a5e74995dd5 -Author: Shankar Prasad -Date: Wed Jan 22 14:35:12 2014 +0530 - - updated kn.po - - po/kn.po | 1474 +++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 793 insertions(+), 681 deletions(-) - -commit bcd54506991a0c141f8719ecebb6023f83ab5be6 -Author: Vangelis Skarmoutsos -Date: Mon Jan 20 09:27:08 2014 +0200 - - Updated Greek translation - - po/el.po | 263 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 132 insertions(+), 131 deletions(-) - -commit 0f487cfc7c69c42d18a12aff23ddde15ae652d60 -Author: Mattias Põldaru -Date: Fri Jan 17 17:45:23 2014 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 79 ++++++++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 54 insertions(+), 25 deletions(-) - -commit 076184a1a8172634543b542392b7424273ed3a11 -Author: Marek Černocký -Date: Thu Jan 16 20:53:42 2014 +0100 - - Updated Czech translation - - po/cs.po | 636 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 335 insertions(+), 301 deletions(-) - -commit b0fdf3cb1b8d086e804ef3bce469a2c2379cf7a2 -Author: Jiri Grönroos -Date: Wed Jan 15 15:02:20 2014 +0200 - - Finnish translation update - - po/fi.po | 354 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 177 insertions(+), 177 deletions(-) - -commit b969726cdd9e894ab9851e393f4395b7486fcc44 -Author: Felix Riemann -Date: Mon Jan 13 21:34:47 2014 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 59bee0c23105f737d90d8f30732b5a7297e2fa03 -Author: Felix Riemann -Date: Mon Jan 13 21:30:18 2014 +0100 - - Prepare for release 3.11.4 - - NEWS | 22 ++++++++++++++++++++++ - 1 file changed, 22 insertions(+) - -commit 757128bc3792cca59115df3b956bffedd3732214 -Author: Lars Uebernickel -Date: Tue Jan 7 12:18:19 2014 +0100 - - Don't call gdk_threads_init() - - Accessing gdk from outside the main thread is deprecated. - - This also replaces an occurence of gdk_threads_add_idle_full() with an - idle source that is dispatched to the main thread. - - https://bugzilla.gnome.org/show_bug.cgi?id=721755 - - src/eog-image.c | 6 +++--- - src/main.c | 1 - - 2 files changed, 3 insertions(+), 4 deletions(-) - -commit 789afdc1647342ea905104db873fe86aba928708 -Author: Felix Riemann -Date: Tue Jan 7 23:07:26 2014 +0100 - - Use Python 3.x for Python plugins - - src/eog-plugin-engine.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 548240b730630dbfdbcc0a1de9c715f7b57d98d3 -Author: Felix Riemann -Date: Tue Jan 7 19:16:39 2014 +0100 - - Update FSF address - - The FSF changed its address quite some time ago. Modify the license - headers to contain the new one. Also update the central COPYING - text to the current text from the FSF homepage, which purges some - stray form feed chars in the process. - - https://bugzilla.gnome.org/show_bug.cgi?id=721488 - - COPYING | 41 +++++++++++----------- - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 6 ++-- - cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 6 ++-- - cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 6 ++-- - cut-n-paste/toolbar-editor/egg-toolbar-editor.h | 6 ++-- - cut-n-paste/toolbar-editor/egg-toolbars-model.c | 6 ++-- - cut-n-paste/toolbar-editor/egg-toolbars-model.h | 6 ++-- - jpegutils/transupp-6b.c | 6 ++-- - jpegutils/transupp-6b.h | 6 ++-- - jpegutils/transupp-8a.c | 6 ++-- - plugins/statusbar-date/eog-statusbar-date-plugin.c | 6 ++-- - plugins/statusbar-date/eog-statusbar-date-plugin.h | 6 ++-- - src/eog-application-internal.h | 6 ++-- - src/eog-application.c | 6 ++-- - src/eog-application.h | 6 ++-- - src/eog-close-confirmation-dialog.c | 7 ++-- - src/eog-close-confirmation-dialog.h | 7 ++-- - src/eog-config-keys.h | 6 ++-- - src/eog-debug.c | 6 ++-- - src/eog-debug.h | 6 ++-- - src/eog-dialog.c | 6 ++-- - src/eog-dialog.h | 6 ++-- - src/eog-enums.h | 6 ++-- - src/eog-error-message-area.c | 8 ++--- - src/eog-error-message-area.h | 8 ++--- - src/eog-exif-util.c | 6 ++-- - src/eog-exif-util.h | 6 ++-- - src/eog-file-chooser.c | 7 ++-- - src/eog-file-chooser.h | 7 ++-- - src/eog-image-jpeg.c | 7 ++-- - src/eog-image-private.h | 6 ++-- - src/eog-image.c | 6 ++-- - src/eog-image.h | 6 ++-- - src/eog-job-scheduler.c | 6 ++-- - src/eog-job-scheduler.h | 6 ++-- - src/eog-jobs.c | 6 ++-- - src/eog-jobs.h | 6 ++-- - src/eog-list-store.c | 6 ++-- - src/eog-list-store.h | 6 ++-- - src/eog-metadata-details.c | 6 ++-- - src/eog-metadata-details.h | 6 ++-- - src/eog-metadata-reader-jpg.c | 6 ++-- - src/eog-metadata-reader-jpg.h | 6 ++-- - src/eog-metadata-reader-png.c | 6 ++-- - src/eog-metadata-reader-png.h | 6 ++-- - src/eog-metadata-reader.c | 6 ++-- - src/eog-metadata-reader.h | 6 ++-- - src/eog-plugin-engine.c | 6 ++-- - src/eog-plugin-engine.h | 6 ++-- - src/eog-preferences-dialog.c | 6 ++-- - src/eog-preferences-dialog.h | 6 ++-- - src/eog-print-image-setup.c | 6 ++-- - src/eog-print-image-setup.h | 6 ++-- - src/eog-print-preview.c | 6 ++-- - src/eog-print-preview.h | 6 ++-- - src/eog-print.c | 6 ++-- - src/eog-print.h | 6 ++-- - src/eog-properties-dialog.c | 6 ++-- - src/eog-properties-dialog.h | 6 ++-- - src/eog-session.c | 6 ++-- - src/eog-session.h | 6 ++-- - src/eog-sidebar.c | 6 ++-- - src/eog-sidebar.h | 6 ++-- - src/eog-statusbar.c | 6 ++-- - src/eog-statusbar.h | 6 ++-- - src/eog-thumb-nav.c | 6 ++-- - src/eog-thumb-nav.h | 6 ++-- - src/eog-thumb-view.c | 6 ++-- - src/eog-thumb-view.h | 6 ++-- - src/eog-thumbnail.c | 6 ++-- - src/eog-thumbnail.h | 6 ++-- - src/eog-util.c | 6 ++-- - src/eog-util.h | 6 ++-- - src/eog-window.c | 6 ++-- - src/eog-window.h | 6 ++-- - src/main.c | 6 ++-- - src/zoom.c | 6 ++-- - src/zoom.h | 6 ++-- - 78 files changed, 253 insertions(+), 259 deletions(-) - -commit 7eff8509cb0e19a885d6fdc783710fd877a23650 -Author: Victor Ibragimov -Date: Tue Jan 7 16:30:34 2014 +0500 - - Tajik translation updated - - po/tg.po | 22 +++++++++++----------- - 1 file changed, 11 insertions(+), 11 deletions(-) - -commit 7394f37ddc02f5ca3da49537407e65daa1d31b51 -Author: Dimitris Spingos -Date: Sat Jan 4 22:10:29 2014 +0200 - - Updated Greek translation - - po/el.po | 312 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 156 insertions(+), 156 deletions(-) - -commit 0a4e7b586c720dbb742f2da901c6e0ac3f3b1d48 -Author: Felix Riemann -Date: Tue Dec 31 15:42:17 2013 +0100 - - EogScrollView: Fix unitialized data usage - - src/eog-scroll-view.c | 1 + - 1 file changed, 1 insertion(+) - -commit 4b1fef8f240e3fd6592a7e579c46f79760a74418 -Author: Felix Riemann -Date: Fri Dec 27 17:42:30 2013 +0100 - - Improve screenshot PNG compression - - data/screenshot.png | Bin 77624 -> 68590 bytes - 1 file changed, 0 insertions(+), 0 deletions(-) - -commit ddf9b229e4fab957914359a42df326258fae08f8 -Author: Matej Urbančič -Date: Mon Dec 23 20:05:47 2013 +0100 - - Updated Slovenian translation - - po/sl.po | 298 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 152 insertions(+), 146 deletions(-) - -commit 24008884caace078031a3413d2f8d46cf6529cc1 -Author: Kjartan Maraas -Date: Mon Dec 23 10:28:15 2013 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 298 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 150 insertions(+), 148 deletions(-) - -commit dd456e78b46a2e8b028c7c95e10501bba6996835 -Author: Tong Hui -Date: Sun Dec 22 23:30:49 2013 +0800 - - Update Chinese simplified translation - - po/zh_CN.po | 639 ++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 337 insertions(+), 302 deletions(-) - -commit da5d5ab3302a795f68b7df4f448cad12a2c4bb03 -Author: Yosef Or Boczko -Date: Sun Dec 22 00:29:30 2013 +0200 - - Updated Hebrew translation - - Signed-off-by: Yosef Or Boczko - - po/he.po | 498 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 262 insertions(+), 236 deletions(-) - -commit 97dc6d7cdae8a071114d0dd5e0aadd60601929da -Author: Fran Diéguez -Date: Thu Dec 19 01:45:53 2013 +0100 - - Updated Galician translations - - po/gl.po | 297 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 151 insertions(+), 146 deletions(-) - -commit 496dda998335f00bf169f9da7b17b0f28a154d94 -Author: Piotr Drąg -Date: Wed Dec 18 19:26:00 2013 +0100 - - Fix screenshot in appdata file - - data/eog.appdata.xml.in | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 86d4720ef8abb6450fc35728c0b05bc45ad9dedf -Author: William Jon McCann -Date: Wed Dec 18 09:10:05 2013 -0500 - - Update project homepage url and screenshot - - data/eog.appdata.xml.in | 4 ++-- - data/screenshot.png | Bin 0 -> 77624 bytes - eog.doap | 2 +- - src/eog-window.c | 2 +- - 4 files changed, 4 insertions(+), 4 deletions(-) - -commit 08a8460a6a3aaea65d25b8f94007be4551ee184a -Author: Felix Riemann -Date: Tue Dec 17 15:53:10 2013 +0100 - - EogImage: Slight optimization of private data structure - - - Remove/Disable unused members - - Close memory hole on 64-bit - - src/eog-image-private.h | 9 +++++---- - src/eog-image.c | 3 +-- - 2 files changed, 6 insertions(+), 6 deletions(-) - -commit 75a803c36789d70b37086ef584066089403a97d7 -Author: Felix Riemann -Date: Mon Dec 16 23:04:52 2013 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 3b6d3ae232a5add2f11b7e8e852d7975ecf31cfe -Author: Felix Riemann -Date: Mon Dec 16 23:00:34 2013 +0100 - - Prepare for release 3.11.3 - - NEWS | 25 +++++++++++++++++++++++++ - 1 file changed, 25 insertions(+) - -commit 0f1bf1c33d8644cba270f0865b7cbe8d47ceebe2 -Author: Michael Catanzaro -Date: Mon Dec 9 15:51:06 2013 -0600 - - app menu: standardize Help/About/Quit - - Use "About" instead of "About Image Viewer" - - https://wiki.gnome.org/Design/HIG/ApplicationMenus - - https://bugzilla.gnome.org/show_bug.cgi?id=720144 - - data/eog-app-menu.xml | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ae405f187935eb656d110a4bb421dacf9cdc34a6 -Author: Jiri Grönroos -Date: Mon Dec 9 08:06:09 2013 +0200 - - Finnish translation update - - po/fi.po | 634 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 325 insertions(+), 309 deletions(-) - -commit cdda72568d1e217f682a77a9857aff163d40ab16 -Author: Felix Riemann -Date: Fri Dec 6 00:14:41 2013 +0100 - - Raise GTK+ dependency to 3.10.6 - - This is to avoid a bug in previous GTK versions that caused - the window to be too small and unnecessary scale images down. - - https://bugzilla.gnome.org/show_bug.cgi?id=690236 - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit de5abd6eec8e531dc4a095ef902bcd1ce9220198 -Author: Victor Ibragimov -Date: Tue Dec 3 12:30:46 2013 +0500 - - Tajik translation updated - - po/tg.po | 126 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 64 insertions(+), 62 deletions(-) - -commit 6234908eed68d1bbe92c84796012fae4f32be026 -Author: Rafael Ferreira -Date: Mon Dec 2 22:20:06 2013 -0200 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 624 ++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 332 insertions(+), 292 deletions(-) - -commit c84128ab33b2751b2456f27e518ecbd515581dbf -Author: Felix Riemann -Date: Sun Dec 1 15:19:30 2013 +0100 - - EogWindow: Export current image over D-Bus - - This exports the current image and collection size through the state - of a custom action. The state is read-only. - - https://bugzilla.gnome.org/show_bug.cgi?id=712350 - - src/eog-window.c | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - -commit 58f8a7bbefd838b96d3632bb3762b7729e98817a -Author: Felix Riemann -Date: Wed Nov 27 22:20:27 2013 +0100 - - EogWindow: Export zoom and rotation functions on the D-Bus - - Wrap the corresponding GtkActions as GActions making them available - on the D-Bus as per-window action. - - https://bugzilla.gnome.org/show_bug.cgi?id=712350 - - src/eog-window.c | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 87 insertions(+), 1 deletion(-) - -commit 7926f086011b95b4f9aea168862998d35095642a -Author: Daniel Mustieles -Date: Tue Nov 26 11:57:12 2013 +0100 - - Updated Spanish translation - - po/es.po | 126 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 64 insertions(+), 62 deletions(-) - -commit 5ce723fec170c2eca89103d79742578462b0ac9e -Author: Ryan Lortie -Date: Thu Nov 21 12:56:30 2013 -0500 - - EogWindow: export some actions on the bus - - Expose a few useful actions in GAction form so that they can be hit from - D-Bus. - - https://bugzilla.gnome.org/show_bug.cgi?id=712350 - - src/eog-window.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 52 insertions(+) - -commit 7e0493275d0503f2d621edb4ac57893eb643e7e3 -Author: Felix Riemann -Date: Mon Nov 25 19:57:08 2013 +0100 - - EogFileChooser: Remove deprecated GtkStock usage - - src/eog-file-chooser.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -commit e370c598356692ed1d6adbb3465b47fd84cf7999 -Author: Dimitris Spingos -Date: Sat Nov 23 20:22:02 2013 +0200 - - Updated Greek help translation - - help/el/el.po | 1584 +++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 976 insertions(+), 608 deletions(-) - -commit bbe4a87a73327dbce3f8e3249f038592e77398d0 -Author: Felix Riemann -Date: Fri Nov 22 23:52:58 2013 +0100 - - EogWindow: Drop deprecated GtkStyle usage - - The call to gtk_widget_set_style was actually useless since - commit f9a5ec65. - - src/eog-window.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 7d2cf4d8986ccf5bde28c612502c489af216ba9a -Author: Felix Riemann -Date: Fri Nov 22 23:25:12 2013 +0100 - - EogPropertiesDialog: Allow RGBA for transparent background color - - Now that it is supported in EogScrollView there's no reason not - to allow setting an alpha value for the color. - - data/eog-preferences-dialog.ui | 6 ++++-- - src/eog-preferences-dialog.c | 38 ++++++++++++++++++-------------------- - 2 files changed, 22 insertions(+), 22 deletions(-) - -commit 823a4cdf43d23fc7da3bdea5dfcfc3cb5c711c63 -Author: Felix Riemann -Date: Fri Nov 22 23:22:39 2013 +0100 - - EogScrollView: Switch to GdkRGBA for background and transparent colors - - This allows passing the colors more or less directly to cairo - without having to convert it from and to the GdkColor format. - - src/eog-scroll-view.c | 137 ++++++++++++++++++++++---------------------------- - src/eog-scroll-view.h | 8 +-- - 2 files changed, 65 insertions(+), 80 deletions(-) - -commit ef0feee32abc6824da71275857514ad85d8df6e0 -Author: Kjartan Maraas -Date: Thu Nov 21 21:14:15 2013 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 613 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 320 insertions(+), 293 deletions(-) - -commit 9da99605e21afb5eb26c37ebcd666e12de1b03b7 -Author: Felix Riemann -Date: Mon Nov 18 23:21:38 2013 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a9ca8bb9f098ecc24dace1a2b3ca65270f4c434f -Author: Felix Riemann -Date: Mon Nov 18 23:17:40 2013 +0100 - - Prepare for release 3.11.2 - - NEWS | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - -commit aae3be0031991749d60631080867c403a7fd7348 -Author: Jasper Lievisse Adriaanse -Date: Fri Nov 15 09:01:49 2013 +0100 - - Prevent redeclaration of typedef 'EogJob'. - - https://bugzilla.gnome.org/show_bug.cgi?id=712354 - - src/eog-jobs.h | 4 ++++ - 1 file changed, 4 insertions(+) - -commit 13c04331362cf2bdc31e85d030f6fda326c44cb6 -Author: Wouter Bolsterlee -Date: Sun Nov 10 14:22:14 2013 +0100 - - Updated Dutch translation - - po/nl.po | 625 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 329 insertions(+), 296 deletions(-) - -commit 1556122acf5b021476a470944840b3077a37dcdc -Author: Dimitris Spingos -Date: Mon Nov 4 10:59:27 2013 +0200 - - Updated Greek translation - - po/el.po | 490 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 260 insertions(+), 230 deletions(-) - -commit fb3a5e1ad633716564c2ba4bf58dfca469bf7cee -Author: Fran Diéguez -Date: Fri Nov 1 15:44:04 2013 +0100 - - Updated Galician translations - - po/gl.po | 618 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 326 insertions(+), 292 deletions(-) - -commit a85800c5bdf50e8be3b78d2d3e15515315c527c9 -Author: Matej Urbančič -Date: Thu Oct 31 20:42:43 2013 +0100 - - Updated Slovenian translation - - po/sl.po | 476 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 250 insertions(+), 226 deletions(-) - -commit 60c34dcda1d0629764ba2c48a92443b4c20c75a0 -Author: Daniel Mustieles -Date: Thu Oct 31 18:21:20 2013 +0100 - - Updated Spanish translation - - po/es.po | 413 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 222 insertions(+), 191 deletions(-) - -commit cee1f77d67767487f6cf12a01f122e2d7f11b275 -Author: Felix Riemann -Date: Wed Oct 30 20:58:12 2013 +0100 - - EogMetadataSidebar: Allow filename to be wrapped at char boundaries - - It is possible for this field to contain no "word". - Enable wrapping at char boundaries as fallback so that such files - don't cause the sidebar enlarging too much. - - https://bugzilla.gnome.org/show_bug.cgi?id=700717 - - src/eog-metadata-sidebar.c | 5 +++++ - 1 file changed, 5 insertions(+) - -commit 0e19aed870ee84ac83fcebcec3def2f8d1bf971f -Author: Felix Riemann -Date: Wed Oct 30 20:34:29 2013 +0100 - - EogCloseConfirmationDialog: Use symbolic icon variant - - Other message dialogs do this as well. This brings the close - confirmation back in sync. - - src/eog-close-confirmation-dialog.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 4188b5145d989755f8e554fdcde0a7cef4c49a4e -Author: Victor Ibragimov -Date: Wed Oct 30 23:41:25 2013 +0500 - - Tajik translation updated - - po/tg.po | 414 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 223 insertions(+), 191 deletions(-) - -commit bfe3c4a92ebd7c4e58cadfdcb286f1e087359dc6 -Author: Felix Riemann -Date: Wed Oct 30 19:32:17 2013 +0100 - - EogPropertiesDialog: Make the details view use all available space - - src/eog-properties-dialog.c | 1 + - 1 file changed, 1 insertion(+) - -commit 04d53c3c8d475c259c477f627038849ae79dd6ed -Author: Felix Riemann -Date: Wed Oct 30 19:27:49 2013 +0100 - - EogPropertiesDialog: Separate Exif/XMP-specific widgets from generic ones - - This is just renaming a few widgets. - - https://bugzilla.gnome.org/show_bug.cgi?id=509406 - - data/eog-image-properties-dialog.ui | 8 +++---- - src/eog-properties-dialog.c | 44 ++++++++++++++++++------------------- - 2 files changed, 26 insertions(+), 26 deletions(-) - -commit 5a497db13c81ac3dbe13456724faf9d7431e976a -Author: Felix Riemann -Date: Wed Oct 30 19:07:53 2013 +0100 - - EogMetadataDetails: Don't install header file - - This is not really useful for plugins. - - src/Makefile.am | 6 ++++-- - src/eog-metadata-details.h | 4 ++++ - 2 files changed, 8 insertions(+), 2 deletions(-) - -commit 2969a58b0ceeb8c6af1e04c39aa230e72b70ea20 -Author: Felix Riemann -Date: Wed Oct 30 19:05:12 2013 +0100 - - EogExifDetails: Rename to EogMetadataDetails - - The widget is not specific to Exif, and is used for XMP as well. - - https://bugzilla.gnome.org/show_bug.cgi?id=509406 - - doc/reference/Makefile.am | 2 +- - po/POTFILES.in | 2 +- - src/Makefile.am | 10 +-- - src/eog-exif-details.h | 72 ------------------ - src/{eog-exif-details.c => eog-metadata-details.c} | 88 +++++++++++----------- - src/eog-metadata-details.h | 74 ++++++++++++++++++ - src/eog-properties-dialog.c | 8 +- - 7 files changed, 129 insertions(+), 127 deletions(-) - -commit 8b8c67d7ed3603cce25ed72482bbbafba8f0d90f -Author: Felix Riemann -Date: Mon Oct 28 23:14:42 2013 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit e1b23e070ae22ff12a73a3e2ea07e6a8f08d2998 -Author: Felix Riemann -Date: Mon Oct 28 23:10:51 2013 +0100 - - Update for release 3.11.1 - - NEWS | 33 +++++++++++++++++++++++++++++++++ - 1 file changed, 33 insertions(+) - -commit 4e0d34351c941cf0d8ea4573ee5766525afd5687 -Author: Felix Riemann -Date: Mon Oct 28 21:39:08 2013 +0100 - - EogCloseConfirmationDialog: Really fix GtkStock usage - - This was incomplete in commit f0a2faf9. - - src/eog-close-confirmation-dialog.c | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 6701f4e8b778122491e94f59a5c70ebd632c799f -Author: Felix Riemann -Date: Mon Oct 28 21:09:42 2013 +0100 - - EogPreferencesDialog: Make the colorbuttons align more nicely - - Adjust spacing to labels so both colorbuttons are likely to be aligned. - - data/eog-preferences-dialog.ui | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 4d438b259fa73c9bd8c8e081c75a273b4e0b3f01 -Author: Felix Riemann -Date: Mon Oct 28 20:57:56 2013 +0100 - - configure: Drop unneeded check for Sunkeysym header - - eog doesn't use any of these defined keyboard codes anymore. - - configure.ac | 7 ------- - 1 file changed, 7 deletions(-) - -commit e834eec552cebffea9d57a00269d0512074fb9ee -Author: Felix Riemann -Date: Mon Oct 28 20:54:50 2013 +0100 - - Remove long replaced toolbar definition - - This lives in eog-toolbar.xml now. - - data/eog-ui.xml | 12 ------------ - 1 file changed, 12 deletions(-) - -commit 305d2c52a38c0291a3e06055bcfad82d2d1a6e6c -Author: Felix Riemann -Date: Mon Oct 28 20:46:54 2013 +0100 - - Overhaul batch save as dialog - - - Make the XML fit for recent Glade versions - - Replace deprecated GtkTables with GtkGrids - - Fix the filename preview's size extending behaviour - - Remove stock buttons - - data/eog-multiple-save-as-dialog.ui | 477 +++++++++++++----------------------- - 1 file changed, 167 insertions(+), 310 deletions(-) - -commit 8f83ae4397bf7a477a154e5712b799fa43c60187 -Author: Felix Riemann -Date: Sun Oct 27 12:55:27 2013 +0100 - - Use intltool's GSettings support - - Necessary to be able to build the AppData XML in the same folder. - - https://bugzilla.gnome.org/show_bug.cgi?id=708757 - - configure.ac | 4 +- - data/Makefile.am | 8 +-- - data/org.gnome.eog.gschema.xml.in | 133 +++++++++++++++++++++++++++++++++++ - data/org.gnome.eog.gschema.xml.in.in | 133 ----------------------------------- - po/POTFILES.in | 2 +- - po/POTFILES.skip | 1 - - 6 files changed, 140 insertions(+), 141 deletions(-) - -commit 44866d5177903e79d0fb1b9f2e313ae087bc3358 -Author: Richard Hughes -Date: Wed Sep 25 15:55:12 2013 +0100 - - Add an AppData file - - See http://people.freedesktop.org/~hughsient/appdata/ for details. - - https://bugzilla.gnome.org/show_bug.cgi?id=708757 - - data/Makefile.am | 8 ++++++++ - data/eog.appdata.xml.in | 23 +++++++++++++++++++++++ - po/POTFILES.in | 1 + - 3 files changed, 32 insertions(+) - -commit 99e05c3a8f215b9fd38715ebaad2b7e0d1efd756 -Author: Victor Ibragimov -Date: Sun Oct 27 13:44:22 2013 +0500 - - Tajik translation updated - - po/tg.po | 478 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 242 insertions(+), 236 deletions(-) - -commit 788142761773e538e647a840f3b6363f8b2aae4d -Author: Yosef Or Boczko -Date: Sun Oct 27 02:49:37 2013 +0200 - - Updated Hebrew translation - - po/he.po | 482 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 245 insertions(+), 237 deletions(-) - -commit a633e6c442e8e7ac7ab278fb7698895572d9189a -Author: Felix Riemann -Date: Fri Oct 25 18:12:00 2013 +0200 - - Raise version to cleary mark this as development version again - - Release 3.11.1 will be next. - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 74c9c1617292823f86fd00bd94c01614b9db33b6 -Author: Felix Riemann -Date: Fri Oct 25 17:57:37 2013 +0200 - - Raise GTK+ dependency for GtkRevealer - - GtkRevealer came with GTK+ 3.9.0. - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 2fbff4bbbda33441c841cca3a6723579e9298c6b -Author: Felix Riemann -Date: Fri Oct 25 17:51:55 2013 +0200 - - EogWindow: Use GtkOverlay and GtkRevealer for fullscreen toolbar - - Allows removing the previous hack using an overlaid popup window. - Also produces a nice animation when showing/hiding the toolbar and - makes the toolbar not hide the sidebar. - - src/eog-window.c | 76 +++++++++++++++++++------------------------------------- - 1 file changed, 25 insertions(+), 51 deletions(-) - -commit 0f7988cf16c8181d1b984130034556c59a1fa690 -Author: Felix Riemann -Date: Wed Oct 23 18:57:47 2013 +0200 - - Add more debug output to initial window size calculation - - Should help debugging the common problems here. - - src/eog-window.c | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - -commit 32858a5a3d78b235e7fb2abf25497f3ceec01741 -Author: Daniel Mustieles -Date: Fri Oct 25 16:40:12 2013 +0200 - - Updated Spanish translation - - po/es.po | 478 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 242 insertions(+), 236 deletions(-) - -commit d050ee9a7bcc8ccaab0ac233576bd6e09225555d -Author: Matej Urbančič -Date: Thu Oct 24 21:09:23 2013 +0200 - - Updated Slovenian translation - - po/sl.po | 475 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 241 insertions(+), 234 deletions(-) - -commit ccdd01142cd17f8f8568888caf807c8b4643e65d -Author: Dimitris Spingos -Date: Thu Oct 24 15:30:33 2013 +0300 - - Updated Greek translation - - po/el.po | 527 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 266 insertions(+), 261 deletions(-) - -commit ae8107fedee8da359c0559b931dd794e6828cf76 -Author: Felix Riemann -Date: Sat Oct 19 00:44:05 2013 +0200 - - EogWindow: Fix GtkStock usage - - Stop using the GtkStock interface and self-select text and icon. - - src/eog-window.c | 61 ++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 33 insertions(+), 28 deletions(-) - -commit c19345e9cd56ea372eaab7bf20b7de3d2fcfa892 -Author: Felix Riemann -Date: Thu Oct 3 16:42:44 2013 +0200 - - EogScrollView: Convert to GtkGrid - - GtkTable is deprecated. - - src/eog-scroll-view.c | 33 ++++++++++++++------------------- - src/eog-scroll-view.h | 4 ++-- - 2 files changed, 16 insertions(+), 21 deletions(-) - -commit 2ad01250cb10a76a3d4c1c12141d4fefdc012437 -Author: Felix Riemann -Date: Fri Oct 18 23:44:15 2013 +0200 - - Modernize configure.ac - - - Require libtool 2.2 - Nobody seems to use libtool 1.x anymore, allows dropping more deprecated - libtool macros - - AC_HELP_STRING -> AS_HELP_STRING - - AC_TRY_CPP/LINK -> AC_PREPROC/LINK - - Try making the indentation more consistent - - configure.ac | 147 +++++++++++++++++++++++++++++------------------------------ - 1 file changed, 73 insertions(+), 74 deletions(-) - -commit 3a8850d8832ff589c7191c85d0bbc2900f78a76b -Author: Felix Riemann -Date: Fri Oct 18 22:08:43 2013 +0200 - - Remove deprecated autoconf macros - - GNOME_COMMON_INIT is deprecated since 2010 and definetely obsolete in - eog since commit 08aca771ca. - AC_ISC_POSIX is not needed anymore on modern systems. - - configure.ac | 2 -- - 1 file changed, 2 deletions(-) - -commit 8bbfd20d0bce00a63d58b6a05702a8afd19548c7 -Author: Felix Riemann -Date: Fri Oct 18 21:35:27 2013 +0200 - - Update git.mk - - Revision 651d03e8 from https://github.com/behdad/git.mk - - git.mk | 68 +++++++++++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 47 insertions(+), 21 deletions(-) - -commit 16a36728e9a6794e4cd07fe586d5eb208f897e9b -Author: Felix Riemann -Date: Fri Oct 18 21:17:02 2013 +0200 - - Fix automake deprecation warnings - - INCLUDE is deprecated since 2001. - Use the equivalent AM_CPPFLAGS variable. - - jpegutils/Makefile.am | 2 +- - plugins/Makefile.am | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit b8b1314f7190863fca8c70f2682fc122b9f89357 -Author: Felix Riemann -Date: Fri Oct 18 21:13:52 2013 +0200 - - Update gtk-doc Makefile template - - Should fix an automake warning about deprecated variables. - Raise required minimum version for XML parameter. It's probably also been - a while since someone tested against gtk-doc 1.9. - - configure.ac | 4 +- - doc/reference/Makefile.am | 47 +++++++++++++++------- - .../{eog-docs.sgml.in => eog-docs.xml.in} | 0 - 3 files changed, 34 insertions(+), 17 deletions(-) - -commit 4a54515f46b1166d168859479dd6718cc30d590e -Author: Marek Černocký -Date: Sun Oct 13 15:18:31 2013 +0200 - - Some fixes - - help/cs/cs.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit f54afe33a4082dc5db2afe9d09c4347f10351f36 -Author: tuhaihe -Date: Sun Oct 13 18:15:55 2013 +0800 - - update Simplified Chinese (zh_CN) translation - - po/zh_CN.po | 329 +++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 190 insertions(+), 139 deletions(-) - -commit 9fb6384f7cb264b4a0f2c6cec8969d9700c6f588 -Author: Arash Mousavi -Date: Tue Oct 8 19:22:34 2013 +0330 - - L10N: Updated Persian translations - - po/fa.po | 580 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 274 insertions(+), 306 deletions(-) - -commit 296c14628e2dcb7d127464f6c8c52a6af2eb6fa9 -Author: Carles Ferrando -Date: Sun Oct 6 22:15:34 2013 +0200 - - [l10n] Updated Catalan (Valencian) translation - - po/ca@valencia.po | 1701 +++++++++-------------------------------------------- - 1 file changed, 293 insertions(+), 1408 deletions(-) - -commit 4d47ec5d9307cf33f1826884666b14cb1b8ce71e -Author: Felix Riemann -Date: Sun Oct 6 15:36:08 2013 +0200 - - Remove unneeded xmp_terminate call - - This is called by EogApplication if needed. - - src/main.c | 7 ------- - 1 file changed, 7 deletions(-) - -commit 997742b4f0d9023d402f5e7a519aca12fba2be46 -Author: John Hiesey -Date: Sat Sep 7 01:02:51 2013 +0000 - - Delay display initialization to avoid losing event timestamp - - Should fix a new window not receiving focus when opening another - image from Nautilus. - - https://bugzilla.gnome.org/show_bug.cgi?id=582931 - - src/eog-application.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++++- - src/main.c | 54 +------------------------------------------- - 2 files changed, 62 insertions(+), 54 deletions(-) - -commit e11fc4056c14d017f19bdb306b29c149b891ed78 -Author: Felix Riemann -Date: Thu Oct 3 13:26:26 2013 +0200 - - EogSidebar: Fix deprecated GtkStock usage - - src/eog-sidebar.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 1222978be073377f6a0b32559868a9d3a47770e9 -Author: Felix Riemann -Date: Fri Oct 4 14:23:58 2013 +0200 - - EogApplication: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-application.c | 10 ++-------- - 1 file changed, 2 insertions(+), 8 deletions(-) - -commit e0f99fbc2782126f6ff4b715b3c51de662b0d0a2 -Author: Felix Riemann -Date: Fri Oct 4 14:23:44 2013 +0200 - - EogClipboardHandler: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-clipboard-handler.c | 9 ++------- - 1 file changed, 2 insertions(+), 7 deletions(-) - -commit a545274a51a55ac75160090c929f3f7c85f0ba8e -Author: Felix Riemann -Date: Fri Oct 4 14:23:22 2013 +0200 - - EogCloseConfirmationDialog: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-close-confirmation-dialog.c | 10 ++-------- - 1 file changed, 2 insertions(+), 8 deletions(-) - -commit 007273d7a945fba9bbf599019499bd38ecf263ff -Author: Felix Riemann -Date: Fri Oct 4 14:23:09 2013 +0200 - - EogDialog: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-dialog.c | 11 +++-------- - 1 file changed, 3 insertions(+), 8 deletions(-) - -commit 77be951cb3d61fa2c051de14ea3501d2c07cf7e6 -Author: Felix Riemann -Date: Fri Oct 4 14:22:46 2013 +0200 - - EogExifDetails: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-exif-details.c | 11 +++-------- - 1 file changed, 3 insertions(+), 8 deletions(-) - -commit c485fb8b57231ae6ce9f8e318d05dcef5b49e3d6 -Author: Felix Riemann -Date: Fri Oct 4 14:22:15 2013 +0200 - - EogFileChooser: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-file-chooser.c | 10 ++-------- - 1 file changed, 2 insertions(+), 8 deletions(-) - -commit 756dc07673b0d72b24f980ac074958b374686112 -Author: Felix Riemann -Date: Fri Oct 4 14:21:51 2013 +0200 - - EogImage: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-image.c | 9 ++------- - 1 file changed, 2 insertions(+), 7 deletions(-) - -commit d7317d25330e7e988bb463be9f95fe7e56e5133f -Author: Felix Riemann -Date: Fri Oct 4 14:21:20 2013 +0200 - - EogListStore: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-list-store.c | 11 +++-------- - 1 file changed, 3 insertions(+), 8 deletions(-) - -commit 80cf4229a3b5d4ca2b74f7f01f128bc61e42d38e -Author: Felix Riemann -Date: Fri Oct 4 14:20:58 2013 +0200 - - EogMetadataReader: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - Use G_ADD_PRIVATE for this due to G_DEFINE_TYPE_WITH_CODE - - src/eog-metadata-reader-jpg.c | 12 ++++-------- - src/eog-metadata-reader-png.c | 12 ++++-------- - 2 files changed, 8 insertions(+), 16 deletions(-) - -commit 7725a558253cc74af55d7215304401ad2a34fb08 -Author: Felix Riemann -Date: Fri Oct 4 14:19:51 2013 +0200 - - EogMetadataSidebar: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-metadata-sidebar.c | 9 ++------- - 1 file changed, 2 insertions(+), 7 deletions(-) - -commit 119a768de747c60cb3464d5f2e3d94b1825a1025 -Author: Felix Riemann -Date: Fri Oct 4 14:19:20 2013 +0200 - - EogPluginEngine: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-plugin-engine.c | 10 +++------- - 1 file changed, 3 insertions(+), 7 deletions(-) - -commit afa0dc8683c5129b5a761af6c0aaff404498afd2 -Author: Felix Riemann -Date: Fri Oct 4 14:19:05 2013 +0200 - - EogPreferencesDialog: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-preferences-dialog.c | 11 +++-------- - 1 file changed, 3 insertions(+), 8 deletions(-) - -commit ad8c96331f1628d006e621ceb8fdcddb5204cded -Author: Felix Riemann -Date: Fri Oct 4 14:18:15 2013 +0200 - - EogPrintImageSetup: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-print-image-setup.c | 10 ++-------- - 1 file changed, 2 insertions(+), 8 deletions(-) - -commit ffc41379a0a3581672e40ae7da418188f99adce8 -Author: Felix Riemann -Date: Fri Oct 4 13:50:18 2013 +0200 - - EogPrintPreview: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-print-preview.c | 11 +++-------- - 1 file changed, 3 insertions(+), 8 deletions(-) - -commit 3945bb1933e3a1c395ccc55ecec2422e8df01f62 -Author: Felix Riemann -Date: Fri Oct 4 13:49:39 2013 +0200 - - EogPropertiesDialog: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-properties-dialog.c | 11 +++-------- - 1 file changed, 3 insertions(+), 8 deletions(-) - -commit 8e31683d6ece1883e2004d6921ebc056e5683905 -Author: Felix Riemann -Date: Fri Oct 4 13:49:16 2013 +0200 - - EogStatusbar: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-statusbar.c | 13 ++++--------- - 1 file changed, 4 insertions(+), 9 deletions(-) - -commit dba0bd4c7bae69ae7911cd34425ee0ee89223767 -Author: Felix Riemann -Date: Fri Oct 4 13:48:48 2013 +0200 - - EogThumbNav: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-thumb-nav.c | 15 +++++---------- - 1 file changed, 5 insertions(+), 10 deletions(-) - -commit 5cdb1b84a729cacefab58bfa0687b4abc96ad3a5 -Author: Felix Riemann -Date: Fri Oct 4 13:48:11 2013 +0200 - - EogURIConverter: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-uri-converter.c | 11 +++-------- - 1 file changed, 3 insertions(+), 8 deletions(-) - -commit f0c977d535e8a43fe2733315e5815414594928ee -Author: Felix Riemann -Date: Thu Oct 3 16:21:13 2013 +0200 - - EogScrollView: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-scroll-view.c | 9 ++------- - 1 file changed, 2 insertions(+), 7 deletions(-) - -commit 2b2563219c805ed067b8836503d67c5c3ef44fb9 -Author: Felix Riemann -Date: Thu Oct 3 14:42:43 2013 +0200 - - EogSidebar: Use G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-sidebar.c | 9 ++------- - 1 file changed, 2 insertions(+), 7 deletions(-) - -commit 3fe0bd486b94600bf4c08fa1e6fb13567200e347 -Author: Felix Riemann -Date: Fri Oct 4 12:02:32 2013 +0200 - - EogThumbView: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - Use G_ADD_PRIVATE directly in this case. - - src/eog-thumb-view.c | 14 +++++--------- - 1 file changed, 5 insertions(+), 9 deletions(-) - -commit 842775b28e5fd0b7f5fd78c4bff8bac44411cd49 -Author: Felix Riemann -Date: Fri Oct 4 12:02:57 2013 +0200 - - EogTransform: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-transform.c | 9 +++------ - 1 file changed, 3 insertions(+), 6 deletions(-) - -commit 35c38646d6af5552f2f24afa6755d0310c8ec1fc -Author: Felix Riemann -Date: Fri Oct 4 12:07:29 2013 +0200 - - EogWindow: Convert to G_DEFINE_TYPE_WITH_PRIVATE - - src/eog-window.c | 11 +++-------- - 1 file changed, 3 insertions(+), 8 deletions(-) - -commit cec40f8cdaed5e1b5c6966dbc13915ea80c81db3 -Author: Felix Riemann -Date: Thu Oct 3 14:45:08 2013 +0200 - - Raise glib dependency to 2.38 - - Needed for G_DEFINE_TYPE_WITH_PRIVATE - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 740a9680cef8daaafd312064cbc6883f31f16ab8 -Author: Felix Riemann -Date: Wed Sep 25 18:14:04 2013 +0200 - - appmenu: Open help docs at the index page - - src/eog-application.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8f37e662316ad69ea66c8a7d6a06290ff75d768e -Author: Rūdolfs Mazurs -Date: Wed Oct 2 23:04:24 2013 +0300 - - Updated Latvian translation - - help/lv/lv.po | 4889 ++++++++++++++++++++++++++++++++++----------------------- - po/lv.po | 23 +- - 2 files changed, 2928 insertions(+), 1984 deletions(-) - -commit cf5c68302f251c802a018029cc1b4ab19fc5d02e -Author: Cheng-Chia Tseng -Date: Mon Sep 30 19:21:29 2013 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 257 ++++++++++++++++++++++++++++++------------------------------ - po/zh_TW.po | 257 ++++++++++++++++++++++++++++++------------------------------ - 2 files changed, 258 insertions(+), 256 deletions(-) - -commit ee0a7405332ca664fd11a73e48bdd6fb864dad12 -Author: Muhammet Kara -Date: Wed Sep 25 21:10:44 2013 +0300 - - [l10n]Updated Turkish translation - - po/tr.po | 371 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 212 insertions(+), 159 deletions(-) - -commit 666e5c7cdf25c1c06d7581d77fbf7e65cac472d6 -Author: Felix Riemann -Date: Tue Sep 24 14:03:01 2013 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 76e7c714781eae064faeab5ac708b133a6bf1422 -Author: Felix Riemann -Date: Tue Sep 24 13:57:19 2013 +0200 - - Prepare for release 3.10.0 - - NEWS | 25 +++++++++++++++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 27 insertions(+), 2 deletions(-) - -commit ef766cdb9db26f6d5d73e58f2332c4a21e72d1a7 -Author: Felix Riemann -Date: Tue Sep 24 13:12:35 2013 +0200 - - EogWindow: Add translator comment about screensaver inhibition - - https://bugzilla.gnome.org/show_bug.cgi?id=708554 - - src/eog-window.c | 1 + - 1 file changed, 1 insertion(+) - -commit 398e250882b61ed7d93232aac277b7e4753062bd -Author: Pavol Klačanský -Date: Sun Sep 22 23:15:00 2013 +0200 - - Updated slovak translation - - po/sk.po | 292 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 151 insertions(+), 141 deletions(-) - -commit 8aeb8b33b277b832ac3be1166247a984fa1110bd -Author: António Lima -Date: Sun Sep 22 21:57:45 2013 +0100 - - Updated Portuguese translation - - po/pt.po | 343 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 196 insertions(+), 147 deletions(-) - -commit 3a673ababf7b50f7132faf8b6713147633def2e4 -Author: Reinout van Schouwen -Date: Sun Sep 22 00:33:39 2013 +0200 - - Updated Dutch translation - - po/nl.po | 364 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 212 insertions(+), 152 deletions(-) - -commit 5d615a79d1c333950e270c6fc12ae1aecad7ca53 -Author: Daniel Korostil -Date: Sat Sep 21 13:44:13 2013 +0300 - - Updated Ukrainian - - po/uk.po | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit e39f2051275454ffd91eacd758a15401f57c8e00 -Author: Daniel Korostil -Date: Sat Sep 21 13:39:27 2013 +0300 - - Updated Ukrainian - - po/uk.po | 324 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 186 insertions(+), 138 deletions(-) - -commit 9a2c7ceba81b26ba2e9d59d6c3c5754607f00ea7 -Author: GunChleoc -Date: Fri Sep 20 12:07:50 2013 -0600 - - Added Scottish Gaelic translation - - po/LINGUAS | 1 + - po/gd.po | 1602 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1603 insertions(+) - -commit 3ec3163105e8cc42a210aa011d6638d655b63839 -Author: Jiro Matsuzawa -Date: Thu Sep 19 08:20:54 2013 +0900 - - l10n: Update Japanese translation - - po/ja.po | 37 +++++++++++++++++++++++-------------- - 1 file changed, 23 insertions(+), 14 deletions(-) - -commit 95c90e49b5d04b390fdcead4b06c626a1b6d620c -Author: Enrico Nicoletto -Date: Wed Sep 18 19:54:52 2013 -0300 - - Updated Brazilian Portuguese translation - - help/pt_BR/pt_BR.po | 4084 +++++++++++++++++++++++++++++++++------------------ - 1 file changed, 2616 insertions(+), 1468 deletions(-) - -commit da15977d87de7770460cf796eeafb49d736f4798 -Author: A S Alam -Date: Tue Sep 17 19:57:48 2013 -0500 - - Punjabi Translation updated by Aman - - po/pa.po | 358 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 213 insertions(+), 145 deletions(-) - -commit 7d1980b2fc0c39b73e11894904ad8f92e2787141 -Author: Kenneth Nielsen -Date: Mon Sep 16 23:10:15 2013 +0200 - - Updated Danish translation - - po/da.po | 325 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 189 insertions(+), 136 deletions(-) - -commit dea0776ba93138cfcedb8a28994dc8f32a53db74 -Author: Josep Sànchez -Date: Mon Sep 16 22:54:15 2013 +0200 - - [l10n] Update Catalan translation - - po/ca.po | 1497 ++++++++------------------------------------------------------ - 1 file changed, 190 insertions(+), 1307 deletions(-) - -commit b17bdb3c9cdab0a92554b8bb9de05af1e4360cf8 -Author: Inaki Larranaga Murgoitio -Date: Mon Sep 16 21:23:08 2013 +0200 - - Updated Basque language - - po/eu.po | 329 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 192 insertions(+), 137 deletions(-) - -commit 06099c28cc02cd3cc33c9c05fe77fc1225dfe28c -Author: Khaled Hosny -Date: Mon Sep 16 18:43:24 2013 +0200 - - Update Arabic translation - - po/ar.po | 21 +++++++++++++++------ - 1 file changed, 15 insertions(+), 6 deletions(-) - -commit 2100ce58eda46106e404124f25d2e73a557f8d10 -Author: Felix Riemann -Date: Fri Sep 13 22:18:26 2013 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ff081537f6d5ed6e54c06f86d8cc5ea03ae368a0 -Author: Felix Riemann -Date: Fri Sep 13 22:15:47 2013 +0200 - - Prepare for release 3.9.92 - - NEWS | 30 ++++++++++++++++++++++++++++++ - 1 file changed, 30 insertions(+) - -commit 7de32a6c90aa802590d8d2f1c63aecea0e4d1b34 -Author: Changwoo Ryu -Date: Sat Sep 14 05:06:28 2013 +0900 - - Updated Korean translation - - po/ko.po | 338 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 194 insertions(+), 144 deletions(-) - -commit e14d2faba343bf1efd455bb96be6c8e731f93d82 -Author: Gianvito Cavasoli -Date: Thu Sep 12 08:30:36 2013 +0200 - - [l10n] Updated Italian translation. - - po/it.po | 340 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 195 insertions(+), 145 deletions(-) - -commit 95a54de83691e97e8a80cac554e34540775b78e4 -Author: Mattias Põldaru -Date: Thu Sep 12 07:54:58 2013 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++------------- - 1 file changed, 60 insertions(+), 15 deletions(-) - -commit 8a88950a3ee96842b61d0ce0557ea148ac428832 -Author: Rūdolfs Mazurs -Date: Wed Sep 11 22:57:44 2013 +0300 - - Updated Latvian translation - - po/lv.po | 356 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 215 insertions(+), 141 deletions(-) - -commit c9ad55243211e5e9335a16102560f4561e9740e1 -Author: Nilamdyuti Goswami -Date: Wed Sep 11 01:22:33 2013 +0530 - - Assamese Translation Updated - - po/as.po | 358 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 213 insertions(+), 145 deletions(-) - -commit 86a015579e3e5c5d73b3550eeb9a6c8c0ac3fa8d -Author: Theppitak Karoonboonyanan -Date: Mon Sep 9 20:40:39 2013 +0700 - - Updated Thai translation. - - po/th.po | 20 +++++++++++++------- - 1 file changed, 13 insertions(+), 7 deletions(-) - -commit 7aa0bb9f433bd0370f747ebafbf051d0462b9046 -Author: Benjamin Steinwender -Date: Mon Sep 9 06:32:01 2013 +0200 - - Updated German translation - - po/de.po | 37 +++++++++++++++++++++++-------------- - 1 file changed, 23 insertions(+), 14 deletions(-) - -commit 8a10cd5c34d96bc5582db7b72539f32e155b1ae0 -Author: Kjartan Maraas -Date: Sun Sep 8 11:25:33 2013 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 35 ++++++++++++++++++++++------------- - 1 file changed, 22 insertions(+), 13 deletions(-) - -commit 03c32b4e07bdaf33a2410f087dfe7ab7df0e8d73 -Author: Ihar Hrachyshka -Date: Sun Sep 8 11:19:30 2013 +0300 - - Updated Belarusian translation. - - po/be.po | 343 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 199 insertions(+), 144 deletions(-) - -commit ed179bd23de3822b1fa98d75e5b4d5f9190ba6aa -Author: Dmitriy S. Seregin -Date: Sat Sep 7 13:30:59 2013 +0400 - - Updated Russian translation - - po/ru.po | 611 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 293 insertions(+), 318 deletions(-) - -commit 4a9c0583f33a7618ca7e76acf146f71d142deb27 -Author: Мирослав Николић -Date: Sat Sep 7 06:05:46 2013 +0200 - - Updated Serbian translation - - po/sr.po | 364 ++++++++++++++++++++++++++++++++++----------------------- - po/sr@latin.po | 364 ++++++++++++++++++++++++++++++++++----------------------- - 2 files changed, 438 insertions(+), 290 deletions(-) - -commit c4b829599346f683f2d8c875e24e9524addcd449 -Author: Marek Černocký -Date: Thu Sep 5 12:05:17 2013 +0200 - - Updated Czech translation - - po/cs.po | 51 +++++++++++++++++++++++++++++++-------------------- - 1 file changed, 31 insertions(+), 20 deletions(-) - -commit 392586f7d09ef6ad5c05da087b1f09673cf07bc6 -Author: Marek Černocký -Date: Wed Sep 4 18:23:07 2013 +0200 - - Updated Czech translation - - po/cs.po | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit c52c61df4025cc3dc61923561114492d4e217c9c -Author: Marek Černocký -Date: Wed Sep 4 18:23:01 2013 +0200 - - Updated Czech translation - - help/cs/cs.po | 4032 ++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 2547 insertions(+), 1485 deletions(-) - -commit 03612ce9e4ba9f75174f84f1e7e1fbbeb815c9a4 -Author: Baurzhan Muftakhidinov -Date: Wed Sep 4 16:51:32 2013 +0600 - - Update Kazakh translation - - po/kk.po | 1638 ++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 956 insertions(+), 682 deletions(-) - -commit 202fb35ca02c14ed8b53d9e16c0e6d0a46a4f44e -Author: Timo Jyrinki -Date: Wed Sep 4 10:58:13 2013 +0300 - - Finnish translation update - - po/fi.po | 353 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 212 insertions(+), 141 deletions(-) - -commit 41ae39275962e97117ee5dbfe200478cbef2c4fa -Author: Chao-Hsiung Liao -Date: Wed Sep 4 14:49:32 2013 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 22 ++++++++++++++++------ - po/zh_TW.po | 22 ++++++++++++++++------ - 2 files changed, 32 insertions(+), 12 deletions(-) - -commit 3434cae0ad8c6a74c492b58ca2539e84325f2ac2 -Author: Alexandre Franke -Date: Tue Sep 3 20:34:10 2013 +0200 - - Update French translation - - po/fr.po | 17 +++++++++++++---- - 1 file changed, 13 insertions(+), 4 deletions(-) - -commit 87f29948df58f38bfb612108612b1c9fc934dc72 -Author: Balázs Úr -Date: Tue Sep 3 19:26:14 2013 +0200 - - Updated Hungarian translation - - po/hu.po | 26 +++++++++++++++++++------- - 1 file changed, 19 insertions(+), 7 deletions(-) - -commit 985e801613441253e3fafb1f1bcdfbcdb5a40120 -Author: Yaron Shahrabani -Date: Tue Sep 3 12:08:36 2013 +0300 - - Updated Hebrew translation. - - po/he.po | 19 ++++++++++++++----- - 1 file changed, 14 insertions(+), 5 deletions(-) - -commit 7e6dff88ce7d562319bc3d779325e1bc3b032fd8 -Author: Rafael Ferreira -Date: Mon Sep 2 20:55:38 2013 -0300 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 17 +++++++++++++---- - 1 file changed, 13 insertions(+), 4 deletions(-) - -commit a0a9884d9dc101f04cc413c866ad2f2996f39ac9 -Author: Felix Riemann -Date: Mon Sep 2 23:15:25 2013 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 93c5f1dd58b5a2d2f55cc6a382e9df6e6baa8347 -Author: Felix Riemann -Date: Mon Sep 2 23:13:00 2013 +0200 - - Prepare for release 3.9.91 - - NEWS | 29 +++++++++++++++++++++++++++++ - 1 file changed, 29 insertions(+) - -commit 080badc96a7c3102498d90a68705beff416ef452 -Author: Daniel Mustieles -Date: Mon Sep 2 18:05:01 2013 +0200 - - Updated Spanish translation - - po/es.po | 38 ++++++++++++++++++++++++-------------- - 1 file changed, 24 insertions(+), 14 deletions(-) - -commit c40ca7fd06b59ab739a9064101fc21676628b805 -Author: Victor Ibragimov -Date: Mon Sep 2 15:24:52 2013 +0500 - - Tajik translation updated - - po/tg.po | 42 ++++++++++++++++++++++++++---------------- - 1 file changed, 26 insertions(+), 16 deletions(-) - -commit 2fee07222835a9d3d99e787d4b9aa40b5fcdda9e -Author: Andika Triwidada -Date: Mon Sep 2 15:38:04 2013 +0700 - - Updated Indonesian translation - - po/id.po | 21 +++++++++++++++------ - 1 file changed, 15 insertions(+), 6 deletions(-) - -commit 69f452c2ccb03640860253307d2a7af4b6c69244 -Author: Matej Urbančič -Date: Sun Sep 1 20:27:40 2013 +0200 - - Updated Slovenian translation - - po/sl.po | 19 ++++++++++++++----- - 1 file changed, 14 insertions(+), 5 deletions(-) - -commit 8e378527dc3f1c927cdafb8113c37aedb7b8c4b7 -Author: Aurimas Černius -Date: Sun Sep 1 21:22:59 2013 +0300 - - Updated Lithuanian translation - - po/lt.po | 36 ++++++++++++++++-------------------- - 1 file changed, 16 insertions(+), 20 deletions(-) - -commit 7a51479db40f7589f7275e8cf7476d4ef3d134dd -Author: Piotr Drąg -Date: Sun Sep 1 20:21:19 2013 +0200 - - Updated Polish translation - - po/pl.po | 17 +++++++++++++---- - 1 file changed, 13 insertions(+), 4 deletions(-) - -commit 09d12c1dbbe3127f13677d326d1bc7ec4a40e084 -Author: Fran Diéguez -Date: Sun Sep 1 18:42:35 2013 +0200 - - Updated Galician translations - - po/gl.po | 17 +++++++++++++---- - 1 file changed, 13 insertions(+), 4 deletions(-) - -commit f0a2faf9bc64f2ddacd77df11c058cbbc4dc0188 -Author: Felix Riemann -Date: Sun Sep 1 14:23:45 2013 +0200 - - Fix deprecated GTK_STOCK_DIALOG_* usage - - src/eog-close-confirmation-dialog.c | 4 ++-- - src/eog-error-message-area.c | 6 +++--- - src/eog-window.c | 6 +++--- - 3 files changed, 8 insertions(+), 8 deletions(-) - -commit ddb5fcaff9ef5145bae345f8de18cbefc1ee6d08 -Author: Felix Riemann -Date: Sun Sep 1 14:22:29 2013 +0200 - - reload: Fix deprecated GtkStock usage - - plugins/reload/eog-reload-plugin.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit bbc89a61fc526c3e69ddfaceea4b4fae3a1f507b -Author: Felix Riemann -Date: Sun Sep 1 12:35:33 2013 +0200 - - Remove GtkStock usage in delete/trash confirmation dialogs - - GtkStock is deprecated and it is easier to avoid conflicting mnemonics. - - src/eog-window.c | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - -commit 0ffced37f62338300b5ede4ed0a678fadb5d0294 -Author: Jiro Matsuzawa -Date: Sun Sep 1 18:27:48 2013 +0900 - - Change mnemonic to avoid confliction - - https://bugzilla.gnome.org/show_bug.cgi?id=707212 - - src/eog-window.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit d8b082d3593ddfbe97423ba3a3966c8485d618d7 -Author: Seán de Búrca -Date: Fri Aug 30 22:15:59 2013 -0600 - - Updated Irish translation - - po/ga.po | 1601 ++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 929 insertions(+), 672 deletions(-) - -commit e48d096daef6657a46f00e83d65dc4eaac5da5e5 -Author: Seán de Búrca -Date: Thu Aug 29 19:20:45 2013 -0600 - - Remove extraneous gtkdocize in autogen causing build to fail - - https://bugzilla.gnome.org/show_bug.cgi?id=707099 - - autogen.sh | 5 ----- - 1 file changed, 5 deletions(-) - -commit 45d5bd2f0efe2b9dc11c65b256aa38bafae9037a -Author: Andika Triwidada -Date: Fri Aug 30 14:48:37 2013 +0700 - - Updated Indonesian translation - - po/id.po | 331 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 186 insertions(+), 145 deletions(-) - -commit f4a4d329c3ca4c68e37ce9f4ff48a9a7832ce241 -Author: Ryan Lortie -Date: Thu Aug 29 14:55:45 2013 +0200 - - Update Esperanto translation - - Reviewed by Tiffany Antopolski - - po/eo.po | 498 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 281 insertions(+), 217 deletions(-) - -commit 08aca771ca65468826dd948f3d59a8a56e015d77 -Author: Seán de Búrca -Date: Mon Aug 26 15:25:11 2013 -0600 - - Fix autogen and configure - - https://bugzilla.gnome.org/show_bug.cgi?id=706837 - - Makefile.am | 2 ++ - configure.ac | 2 ++ - 2 files changed, 4 insertions(+) - -commit 0513bb5ded56f3a0ccbd551323ce1e599cfc104d -Author: Alexandre Franke -Date: Thu Aug 22 15:21:38 2013 +0200 - - Update French translation - - po/fr.po | 312 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 178 insertions(+), 134 deletions(-) - -commit c68b57123950957c1e8e7f9ab5c001c28446b7f7 -Author: Piotr Drąg -Date: Thu Aug 22 01:56:27 2013 +0200 - - Updated Polish translation - - po/pl.po | 339 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 193 insertions(+), 146 deletions(-) - -commit cc1d5f8aa36b34c63f45bed0f57935df81c99bb4 -Author: Gabor Kelemen -Date: Thu Aug 22 00:51:10 2013 +0200 - - Update and relicence Hungarian help translation - - help/hu/hu.po | 333 +++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 179 insertions(+), 154 deletions(-) - -commit b001b1898572c8192148542ac2ba9e97b3ef5641 -Author: Felix Riemann -Date: Wed Aug 21 23:21:19 2013 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 501234681af0917633609c80d1fa45c8ad66a5e4 -Author: Felix Riemann -Date: Wed Aug 21 23:18:08 2013 +0200 - - Prepare for release 3.9.90 - - NEWS | 20 ++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 21 insertions(+), 1 deletion(-) - -commit c068094d7a10fe113a6386960515959eda42e6bd -Author: Matej Urbančič -Date: Sat Aug 17 16:58:46 2013 +0200 - - Updated Slovenian translation - - po/sl.po | 264 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 132 insertions(+), 132 deletions(-) - -commit cea40c87856f5453a7bf506c364088c96c56b07a -Author: Theppitak Karoonboonyanan -Date: Tue Aug 13 20:30:32 2013 +0700 - - Updated Thai translation. - - po/th.po | 332 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 185 insertions(+), 147 deletions(-) - -commit 30092cb2a523644403053857ae0f8a7f44d38d35 -Author: Marek Černocký -Date: Tue Aug 13 11:28:51 2013 +0200 - - Updated Czech translation - - po/cs.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b4cce07b4f9dd2ca5234f81d8254465252985983 -Author: Marek Černocký -Date: Tue Aug 13 08:41:23 2013 +0200 - - Updated Czech translation - - po/cs.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit 0390f995cc8ba7631027d81c799177c0daa2e57e -Author: Marek Černocký -Date: Mon Aug 12 21:40:42 2013 +0200 - - Updated Czech translation - - po/cs.po | 62 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 31 insertions(+), 31 deletions(-) - -commit 357a87679a8986902bf6b16984a92160ae05ad0d -Author: Khaled Hosny -Date: Sun Aug 11 13:36:07 2013 +0200 - - Update Arabic translations - - po/ar.po | 246 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 123 insertions(+), 123 deletions(-) - -commit 162a5c7213a8057ed52c81454a91682a08596330 -Author: Aurimas Černius -Date: Thu Aug 8 22:52:09 2013 +0300 - - Updated Lithuanian translation - - po/lt.po | 612 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 374 insertions(+), 238 deletions(-) - -commit e7d24f7622499e598fcea0bd6024d1f02af226c6 -Author: Felix Riemann -Date: Thu Aug 8 20:52:14 2013 +0200 - - Replace deprecated widgets in properties dialog - - data/eog-image-properties-dialog.ui | 46 ++++++++++++++++++++++--------------- - 1 file changed, 28 insertions(+), 18 deletions(-) - -commit 6e64b3cb3508a304cba407b4c23ee11c6a3f41ee -Author: Felix Riemann -Date: Thu Aug 8 20:52:02 2013 +0200 - - Replace deprecated widgets in preferences dialog - - data/eog-preferences-dialog.ui | 37 ++++++++++++++++++++++++------------- - 1 file changed, 24 insertions(+), 13 deletions(-) - -commit 5c2cecfacd7892a56053971fe2703aac46018bf6 -Author: Gabor Kelemen -Date: Tue Aug 6 09:48:14 2013 +0200 - - Updated Hungarian translation - - po/hu.po | 341 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 191 insertions(+), 150 deletions(-) - -commit 38015de1731ec1da8c6bebfcf0cf1ad5b67befff -Author: Rafael Ferreira -Date: Mon Aug 5 21:55:36 2013 -0300 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 584 ++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 352 insertions(+), 232 deletions(-) - -commit 69c81cdd975e8c2bc946f68811c810ec83201d61 -Author: Christian Kirbach -Date: Mon Aug 5 22:38:37 2013 +0200 - - Updated German help translation - - help/de/de.po | 22 +++++----------------- - 1 file changed, 5 insertions(+), 17 deletions(-) - -commit 3664d15e972e0bac101ad0330acee2b61e1056a5 -Author: Fran Diéguez -Date: Fri Aug 2 13:03:48 2013 +0200 - - Updated Galician translations - - po/gl.po | 246 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 123 insertions(+), 123 deletions(-) - -commit a5922fe9f269d63595b76a719fc7b3a03d81e916 -Author: Chao-Hsiung Liao -Date: Fri Aug 2 10:33:07 2013 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 315 ++++++++++++++++++++++++++++++++++-------------------------- - po/zh_TW.po | 315 ++++++++++++++++++++++++++++++++++-------------------------- - 2 files changed, 360 insertions(+), 270 deletions(-) - -commit d8bdde4c1459b01a337a559c901a6fbcab25556f -Author: Yaron Shahrabani -Date: Wed Jul 31 09:23:31 2013 +0300 - - Updated Hebrew translation. - - po/he.po | 499 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 282 insertions(+), 217 deletions(-) - -commit 31ea61034870910ecfd94011473ab24220345fd5 -Author: Felix Riemann -Date: Mon Jul 29 23:35:52 2013 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 32bc55fc423c1a38f3404e873284617933b69336 -Author: Felix Riemann -Date: Mon Jul 29 23:33:16 2013 +0200 - - Prepare for release 3.9.5 - - NEWS | 27 +++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 28 insertions(+), 1 deletion(-) - -commit 7b78b4b0732661db553f5f932d5cc8c7da6f7b44 -Author: Felix Riemann -Date: Sun Jul 28 19:53:40 2013 +0200 - - Remove gi18n.h include from header file - - The translation infrastructure is not used from the headers - and should be used in the .c-files requiring it. - This is is especially true for public headers which require a - different i18n include. - - src/eog-save-as-dialog-helper.c | 1 + - src/eog-uri-converter.c | 1 + - src/eog-uri-converter.h | 1 - - 3 files changed, 2 insertions(+), 1 deletion(-) - -commit 3f6c55deb3643e26c44a4a3a0f9825ff932b2871 -Author: Felix Riemann -Date: Sun Jul 28 19:32:40 2013 +0200 - - EogImage: Move Exempi include into files actually needing it. - - The main eog-image include file doesn't have any dependency on - the Exempi includes. Move it into files that actually use something - from the package. - - src/eog-image-private.h | 5 +++++ - src/eog-image.c | 4 ++++ - src/eog-image.h | 4 ---- - 3 files changed, 9 insertions(+), 4 deletions(-) - -commit df7a1ffb6553db6f9c94267bca95c178129df5e0 -Author: Christian Kirbach -Date: Wed Jul 24 16:26:56 2013 +0200 - - Updated German translation - - help/de/de.po | 798 +++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 421 insertions(+), 377 deletions(-) - -commit 9066f65e6cd8430080665e55e63e0b780d27ee23 -Author: Felix Riemann -Date: Sat Jul 20 20:16:35 2013 +0200 - - EogURIConverter: Make object functions public - - As we install the header we also need to make the class public. - - https://bugzilla.gnome.org/show_bug.cgi?id=704074 - - src/eog-uri-converter.h | 7 ------- - 1 file changed, 7 deletions(-) - -commit 5f5cdfe0fad98089b0c54be92b386fc54268aae4 -Author: Dominique Leuenberger -Date: Fri Jul 12 11:16:35 2013 +0200 - - install eog-uri-converter.h - - eog-jobs.h includes this header - https://bugzilla.gnome.org/show_bug.cgi?id=704074 - - src/Makefile.am | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a33950c14d7b8da8e1c6289709022affb910be2a -Author: Sebastian Keller -Date: Wed Jul 17 02:28:14 2013 +0200 - - Fix svg rendering with gtk >= 3.9.2 - - eog was ignoring the matrix set in the cairo context which now in the - new simplified drawing world is supposed to position the widget - - src/eog-scroll-view.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -commit 101d626852c174143277effbdce4c8ddf6b56707 -Author: Victor Ibragimov -Date: Fri Jul 19 12:04:17 2013 +0500 - - Tajik translation updated - - po/tg.po | 51 +++++++++++++++++++++++++-------------------------- - 1 file changed, 25 insertions(+), 26 deletions(-) - -commit e2aedd6963851a3f20aeffa1ee7d36fb27b62425 -Author: Victor Ibragimov -Date: Thu Jul 18 20:32:36 2013 +0500 - - Tajik translation updated - - po/tg.po | 293 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 172 insertions(+), 121 deletions(-) - -commit ecc87d04104d043fa8f09e0bb0d3b5d3b55e5faf -Author: Benjamin Steinwender -Date: Sun Jul 14 16:39:28 2013 +0200 - - Updated German translation - - po/de.po | 12 +++++------- - 1 file changed, 5 insertions(+), 7 deletions(-) - -commit d85839708d8cdda26d7995dfaec701a78c593655 -Author: Jiro Matsuzawa -Date: Sat Jul 13 21:59:12 2013 +0900 - - l10n: Update Japanese translation - - po/ja.po | 314 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 174 insertions(+), 140 deletions(-) - -commit a21ec8c59d1f7df321f7cf3b8e56af72561a5333 -Author: Daniel Mustieles -Date: Mon Jul 8 13:35:57 2013 +0200 - - Updated Spanish translation - - help/es/es.po | 327 +++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 174 insertions(+), 153 deletions(-) - -commit 6bda818df1b0a353fbb5aea153dbf531819cd81c -Author: Tiffany Ann Antopolski -Date: Sat Jul 6 07:32:42 2013 -0400 - - help: update screenshots to use dark theme - - bug #683908 - - help/C/figures/eog-toolbar-editor.png | Bin 24562 -> 27416 bytes - help/C/figures/image-view-prefs.png | Bin 30993 -> 33011 bytes - help/C/figures/multiple-convert.png | Bin 24970 -> 30781 bytes - help/C/figures/multiple-rename-count.png | Bin 25142 -> 30254 bytes - help/C/figures/plugin-send-by-mail.png | Bin 56866 -> 62863 bytes - help/C/figures/plugin-tools-flickr.png | Bin 56552 -> 0 bytes - help/C/figures/plugins-all.png | Bin 48189 -> 90830 bytes - help/C/figures/prefs-plugins-date.png | Bin 28551 -> 29982 bytes - help/C/figures/prefs-plugins-fullscreen.png | Bin 28569 -> 30013 bytes - help/C/figures/prefs-plugins.png | Bin 26618 -> 28441 bytes - help/C/figures/slideshow-prefs.png | Bin 20616 -> 22467 bytes - help/C/plugin-postr.page | 57 ---------------------------- - help/C/preferences.page | 7 +--- - help/Makefile.am | 2 - - 14 files changed, 1 insertion(+), 65 deletions(-) - -commit ab54359d48b834f7d85ba8e7b1b4eabebd28dfb3 -Author: Benjamin Steinwender -Date: Wed Jul 3 22:33:56 2013 +0200 - - Updated German help translation - - po/de.po | 340 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 192 insertions(+), 148 deletions(-) - -commit fdf17db368a2fda691edc8d7637c0cb776a4bdf7 -Author: Marek Černocký -Date: Wed Jun 26 18:57:34 2013 +0200 - - Updated Czech translation - - po/cs.po | 258 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 129 insertions(+), 129 deletions(-) - -commit 0d579632b2002de32fb35e0e6ad6047e36cdacb2 -Author: Kjartan Maraas -Date: Thu Jun 20 10:20:11 2013 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 240 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 120 insertions(+), 120 deletions(-) - -commit f69749e80e839ddbaf6b7b0a09f2ff3b2f8a31ac -Author: Daniel Mustieles -Date: Wed Jun 19 14:23:43 2013 +0200 - - Updated Spanish translation - - po/es.po | 276 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 131 insertions(+), 145 deletions(-) - -commit d8131568a9129dd8a322fa9b328fb0a9cb0953d8 -Author: Felix Riemann -Date: Tue Jun 18 18:52:27 2013 +0200 - - When deleting images make sure there's is actually something to delete - - Fixes crashes when one tries to delete an image that was already - deleted outside of eog. The result is not nice, but it is - analogous to what "Move to Trash" does in that case. - - https://bugzilla.gnome.org/show_bug.cgi?id=702523 - - src/eog-window.c | 9 ++++++--- - 1 file changed, 6 insertions(+), 3 deletions(-) - -commit 9af77569e533e56678122d9248a248e378d42f20 -Author: Jiro Matsuzawa -Date: Tue Jun 18 10:52:46 2013 +0900 - - Add mnemonic to Delete Image menu item - - https://bugzilla.gnome.org/show_bug.cgi?id=702521 - - src/eog-window.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 97404f79bbcdeb5eacc5346025578d68de60c88f -Author: Victor Ibragimov -Date: Tue Jun 18 10:13:49 2013 +0500 - - Tajik translation updated - - po/tg.po | 58 +++++++++++++++++++++++++++++----------------------------- - 1 file changed, 29 insertions(+), 29 deletions(-) - -commit aeb71f90a684375a9d7b9ff43d86bca2ab2f74d6 -Author: Felix Riemann -Date: Mon Jun 17 23:03:46 2013 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 9e8be47a609875b32299b1fe7591d3c3fc158dbe -Author: Felix Riemann -Date: Mon Jun 17 23:01:08 2013 +0200 - - Prepare for release 3.9.1 - - NEWS | 32 ++++++++++++++++++++++++++++++++ - 1 file changed, 32 insertions(+) - -commit 63e09eee28734df858ddbf962c507a9eed7f39c5 -Author: Felix Riemann -Date: Sun Jun 16 16:03:05 2013 +0200 - - EogImage: Allow calling image_load outside of EogJobs - - This is still needed for the statusbar-date plugin. - EogImage needs to be aware of the load jobs to get this away. - - src/eog-image.c | 18 +++++++++++------- - 1 file changed, 11 insertions(+), 7 deletions(-) - -commit 8fbd964de00924c578eaa47c1a7ef5a6ceb81d8e -Author: Felix Riemann -Date: Sun Jun 16 15:48:58 2013 +0200 - - EogJobs: Reinstate EogJobSave and EogJobSaveAs - - These are also missing cancellation for now. - - src/eog-jobs.c | 169 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 167 insertions(+), 2 deletions(-) - -commit 0a26c8bc7b3c884a7b5a6da001fd207021a1b0ea -Author: Felix Riemann -Date: Sun Jun 16 15:06:49 2013 +0200 - - EogJobs: Make EogJobCopy work with the new scheduler - - Also uses the old worker code for now until job cancellation - is fully implemented. - - src/eog-jobs.c | 28 +++++++++++++++++++++++++++- - src/eog-window.c | 2 -- - 2 files changed, 27 insertions(+), 3 deletions(-) - -commit 707bf266f5166b9be64ab4f445d6dbe00a3c1ed5 -Author: Felix Riemann -Date: Sun Jun 16 14:21:00 2013 +0200 - - EogJobs: Make EogJobTransform work again - - This re-uses the old job code and needs to be - extended with proper cancellation checks. - - src/eog-jobs.c | 29 ++++++++++++++++++++++++++++- - 1 file changed, 28 insertions(+), 1 deletion(-) - -commit 420ad68cb6fa9d9dcbbb6034529e1f64a1479fe5 -Author: Felix Riemann -Date: Wed May 15 21:55:09 2013 +0200 - - EogJobs: Fix signalling callbacks - - Make sure the callbacks are only called once each time. - - src/eog-jobs.c | 22 ++++++++++++++-------- - 1 file changed, 14 insertions(+), 8 deletions(-) - -commit e5c7e101621e19e908a834ae33480c72365bd361 -Author: Javier Sánchez -Date: Fri Feb 15 20:17:28 2013 +0100 - - Refactored eog jobs system. - - src/Makefile.am | 4 +- - src/eog-debug.h | 2 + - src/eog-image.c | 6 +- - src/eog-job-queue.c | 234 ----- - src/eog-job-scheduler.c | 187 ++++ - src/{eog-job-queue.h => eog-job-scheduler.h} | 33 +- - src/eog-jobs.c | 1341 ++++++++++++++++---------- - src/eog-jobs.h | 341 ++++--- - src/eog-list-store.c | 6 +- - src/eog-thumb-view.c | 4 +- - src/eog-window.c | 26 +- - src/main.c | 4 +- - 12 files changed, 1247 insertions(+), 941 deletions(-) - -commit 0ceb75003c32b49d4b75d4689536a51b3e4c8d52 -Author: Khaled Hosny -Date: Sat Jun 8 20:45:23 2013 +0200 - - Update Arabic translation - - po/ar.po | 304 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 180 insertions(+), 124 deletions(-) - -commit 5e50af32f4ecc054ba7888df9aada01a626b6339 -Author: tuhaihe -Date: Thu Jun 6 11:52:50 2013 +0800 - - update Simplified Chinese (zh_CN) translation - - po/zh_CN.po | 298 +++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 152 insertions(+), 146 deletions(-) - -commit 30e54c4b023a866532d5925fc78764e6af6d5f00 -Author: Victor Ibragimov -Date: Wed Jun 5 13:53:40 2013 +0500 - - Tajik updated - - po/tg.po | 18 +++++++++--------- - 1 file changed, 9 insertions(+), 9 deletions(-) - -commit 6d7cf49308384369fe92e606c8eaf21f8bbeb146 -Author: Dimitris Spingos -Date: Wed Jun 5 08:23:30 2013 +0300 - - Updated Greek translation - - po/el.po | 337 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 197 insertions(+), 140 deletions(-) - -commit 8e48620bd4ae6e6465bbee31f0f33920bfcdea40 -Author: Victor Ibragimov -Date: Tue Jun 4 17:22:21 2013 +0500 - - Tajik updated - - po/tg.po | 330 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 197 insertions(+), 133 deletions(-) - -commit e5e922b69bb103de66754cacdb98cdd064f3e9ac -Author: Victor Ibragimov -Date: Tue Jun 4 12:28:30 2013 +0500 - - Tajik updated - - po/tg.po | 26 +++++++++++++------------- - 1 file changed, 13 insertions(+), 13 deletions(-) - -commit 6d16c116bc1bbb91ac60f9ecad9f951137031819 -Author: Victor Ibragimov -Date: Mon Jun 3 14:22:11 2013 +0500 - - Tajik updated - - po/tg.po | 92 ++++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 49 insertions(+), 43 deletions(-) - -commit b4daae8a72dd5af6247ca2368b3b64811d3a812c -Author: Jiro Matsuzawa -Date: Sat Jun 1 00:11:53 2013 +0900 - - l10n: Update Japanese translation - - help/ja/ja.po | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 49d063b6d607c0460dccd212e3d28dd5812c9a95 -Author: Jiro Matsuzawa -Date: Fri May 31 22:35:38 2013 +0900 - - l10n: Update Japanese translation - - po/ja.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 7721f5278c9c4e9f3eeb03092f02698c668bc933 -Author: Victor Ibragimov -Date: Fri May 31 15:32:33 2013 +0500 - - Tajik updated - - po/tg.po | 135 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 68 insertions(+), 67 deletions(-) - -commit 2401fe70a3cebfed6211ba4db81eb4f1bde4cd9d -Author: Victor Ibragimov -Date: Fri May 31 14:02:29 2013 +0500 - - Tajik updated - - po/tg.po | 130 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 65 insertions(+), 65 deletions(-) - -commit 570e11f47e8483a51a3b8c9b38ba36f68d349e1c -Author: Marek Černocký -Date: Wed May 29 12:23:21 2013 +0200 - - Updated Czech translation - - po/cs.po | 317 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 182 insertions(+), 135 deletions(-) - -commit 4d52c0dc9f90be453728b2f6312400c9e098ea93 -Author: Kjartan Maraas -Date: Mon May 27 14:15:32 2013 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 385871baf33533660c4aa52e54f9643148be05fb -Author: Richard Stanislavský -Date: Fri May 24 23:41:29 2013 +0200 - - Updated slovak translation - - po/sk.po | 315 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 182 insertions(+), 133 deletions(-) - -commit 0fa3c71fa592024448f274198de925bf2f346182 -Author: Yaron Shahrabani -Date: Fri May 24 12:10:30 2013 +0300 - - Updated Hebrew translation. - - po/he.po | 339 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 193 insertions(+), 146 deletions(-) - -commit 7fb935bf7a1cb12d9cc6d4b191172d2e0cb2b811 -Author: Fran Diéguez -Date: Mon May 20 01:18:16 2013 +0200 - - Updated Galician translations - - po/gl.po | 313 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 179 insertions(+), 134 deletions(-) - -commit 8ce919f108d10f3a5bc30ffb959bf46cc495d6d4 -Author: Kjartan Maraas -Date: Thu May 16 13:33:13 2013 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 318 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 181 insertions(+), 137 deletions(-) - -commit 1b618a788067e1157711c8d0b92bffbba8580b71 -Author: Felix Riemann -Date: Wed May 15 22:00:49 2013 +0200 - - Update git.mk - - Updated to revision a49ac54ca from https://github.com/behdad/git.mk - - git.mk | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++------------- - 1 file changed, 79 insertions(+), 18 deletions(-) - -commit 823493f93960c6ff4f9cab23454ba8464d4f478a -Author: Felix Riemann -Date: Fri May 10 15:14:18 2013 +0200 - - EogMetadataSidebar: Fix deprecation warning with newer GTK+ - - configure.ac | 2 +- - src/eog-metadata-sidebar.c | 3 +-- - 2 files changed, 2 insertions(+), 3 deletions(-) - -commit e08c9d44b0c0cd36674ffd4cac9a473a68018f8e -Author: Felix Riemann -Date: Fri May 10 14:42:33 2013 +0200 - - Raise initial window size limit to 85% of screen size - - This makes much better use of the available screen space. - - src/eog-window.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 3624b85895ef4ef2c840e4c84cf2fef0b35625bc -Author: Leonardo Donelli -Date: Fri May 10 01:47:37 2013 +0200 - - Set better window size - - Make sure the window is not too big for the screen size. - The previous version did that in a way that didn't work - with some images size, particularly on 16:9 displays. - - https://bugzilla.gnome.org/show_bug.cgi?id=630512 - - src/eog-window.c | 10 ++++------ - 1 file changed, 4 insertions(+), 6 deletions(-) - -commit 988697cfdd6d46fc05afa9b62088833c5a3f6335 -Author: Daniel Mustieles -Date: Thu May 2 19:37:23 2013 +0200 - - Updated Spanish translation - - po/es.po | 340 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 198 insertions(+), 142 deletions(-) - -commit 349e5f9825f75e2c96d48ed84ec70d3ce821b732 -Author: Daniel Mustieles -Date: Thu May 2 19:37:13 2013 +0200 - - Updated Spanish translation - - help/es/es.po | 23 +++++++++++------------ - 1 file changed, 11 insertions(+), 12 deletions(-) - -commit 6710c165498e8395a535727bddfefffbd36f33f0 -Author: Matej Urbančič -Date: Wed May 1 20:31:44 2013 +0200 - - Updated Slovenian translation - - po/sl.po | 572 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 344 insertions(+), 228 deletions(-) - -commit f34e2585350a5607ced88d8826876a2c9a9e9120 -Author: Felix Riemann -Date: Wed May 1 19:47:53 2013 +0200 - - Adjust version to be a development version - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 6ffb1424cb5e11f1403a7cd62d81cd52d4bf550b -Author: Felix Riemann -Date: Wed May 1 19:43:43 2013 +0200 - - Add UI elements for deleting images - - https://bugzilla.gnome.org/show_bug.cgi?id=563538 - - data/eog-toolbar.xml | 1 + - data/eog-ui.xml | 1 + - src/eog-window.c | 33 ++++++++++++++++++--------------- - 3 files changed, 20 insertions(+), 15 deletions(-) - -commit c9111f690078bd7450a260f14a2abc4a9b2f9e45 -Author: Javier Sánchez -Date: Fri Mar 15 19:54:46 2013 +0100 - - Ability to permanently delete photo via keyboard shortcut (Shift-Del) - - Activated shortcut to remove one or more images permanently. Previous - to delete the user is asked to confirm the action. - - https://bugzilla.gnome.org/show_bug.cgi?id=563538 - - src/eog-window.c | 246 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 246 insertions(+) - -commit 23fae7e91d25d7b19fb2db1cee3ebe6e6348e5ad -Author: Felix Riemann -Date: Wed May 1 18:30:35 2013 +0200 - - Remove unnecessary hyphens - - https://bugzilla.gnome.org/show_bug.cgi?id=699043 - - data/eog-preferences-dialog.ui | 25 +++++++++---------------- - help/C/preferences.page | 2 +- - 2 files changed, 10 insertions(+), 17 deletions(-) - -commit f91fad012d987c7060d02c654d14db56c3c02cd1 -Author: OKANO Takayoshi -Date: Sat Apr 27 20:51:47 2013 +0900 - - l10n: Update Japanese translation - - Fix typo - - help/ja/ja.po | 485 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 480 insertions(+), 5 deletions(-) - -commit 8cfda52f45ac4ab1827f98243e3114bae72a647f -Author: Felix Riemann -Date: Mon Apr 15 22:44:15 2013 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 62bd7253870a6d0cb12b696189356d821846317c -Author: Felix Riemann -Date: Mon Apr 15 22:41:18 2013 +0200 - - Prepare for release 3.8.1 - - NEWS | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - -commit ed5665f6e6555afa83dc4a384fff0678cf138653 -Author: Gabor Kelemen -Date: Sun Apr 14 10:18:18 2013 +0200 - - Fix tags in the Hungarian help - - help/hu/hu.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 15979aa1b02a4e01f54c85ab87fc0b5fc9e164b6 -Author: Muhammet Kara -Date: Thu Apr 11 00:33:40 2013 +0300 - - [l10n] Updated Turkish translation - - po/tr.po | 283 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 144 insertions(+), 139 deletions(-) - -commit acad6358e4b3adc06f598f3e6d2400ef6b65002a -Author: Bruce Cowan -Date: Sat Apr 6 17:40:11 2013 +0100 - - Updated British English translation - - po/en_GB.po | 301 +++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 154 insertions(+), 147 deletions(-) - -commit 6b73ef4ae13d2f7b8f44276d3fc053b753bd28eb -Author: Ville-Pekka Vainio -Date: Sun Mar 31 20:16:13 2013 +0300 - - Finnish translation update by Jiri Grönroos - - po/fi.po | 244 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 122 insertions(+), 122 deletions(-) - -commit 213c5d09a1bd3604d44265945f72fd9abe755f7d -Author: Ville-Pekka Vainio -Date: Tue Mar 26 21:17:06 2013 +0200 - - Finnish translation update by Jiri Grönroos - - po/fi.po | 234 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 116 insertions(+), 118 deletions(-) - -commit e9c5562eb3c4fe235036791bc7f7a1b1323a596a -Author: Praveen Illa -Date: Tue Mar 26 19:55:06 2013 +0530 - - Updated Telugu Translation - - po/te.po | 281 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 144 insertions(+), 137 deletions(-) - -commit eba44ecfffefb0ed688a6dadcc0e55e2f49c8b0a -Author: Daniel Korostil -Date: Tue Mar 26 12:29:49 2013 +0200 - - Update uk translation - - po/uk.po | 260 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 134 insertions(+), 126 deletions(-) - -commit abbf91bc7fd0a9489219316c152d7deb04f411b5 -Author: Felix Riemann -Date: Mon Mar 25 21:07:59 2013 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit fda09f283aeb15c36386a64bd2995fd1c47728e9 -Author: Felix Riemann -Date: Mon Mar 25 21:04:19 2013 +0100 - - Prepare for release 3.8.0 - - NEWS | 16 ++++++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 18 insertions(+), 2 deletions(-) - -commit 8335c340766aed7b7e6258fcd9c7ff49e39e733a -Author: Rajesh Ranjan -Date: Mon Mar 25 12:07:55 2013 +0530 - - hindi translation - - po/hi.po | 427 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 207 insertions(+), 220 deletions(-) - -commit f93e2d1d81376d2f32756fdad7701fbde1dd1c1a -Author: Alexandre Franke -Date: Sun Mar 24 18:35:10 2013 +0100 - - Update French translation - - help/fr/fr.po | 15 +++++++-------- - 1 file changed, 7 insertions(+), 8 deletions(-) - -commit 3c7b07bf28102b00c582a9fe8e3560c3d892a6f3 -Author: Gabor Kelemen -Date: Thu Mar 21 10:39:58 2013 +0100 - - Updated Hungarian documentation translation - - help/hu/hu.po | 5 ++--- - 1 file changed, 2 insertions(+), 3 deletions(-) - -commit fae18183361da4e7b05117e0add61248122a2ba5 -Author: Gabor Kelemen -Date: Thu Mar 21 02:31:24 2013 +0100 - - Updated Hungarian documentation translation - - help/hu/hu.po | 175 ++++++++-------------------------------------------------- - 1 file changed, 24 insertions(+), 151 deletions(-) - -commit bc40bea35bc613a92b16c4429ba142aca71363bc -Author: Gianvito Cavasoli -Date: Wed Mar 20 20:39:06 2013 +0100 - - [l10n] Updated Italian translation. - - po/it.po | 263 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 136 insertions(+), 127 deletions(-) - -commit b604721214a1d60642a0a947592dd1b4de04fb0a -Author: Arash Mousavi -Date: Wed Mar 20 22:49:23 2013 +0330 - - L10N: Updated Persian Translation - - po/fa.po | 283 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 144 insertions(+), 139 deletions(-) - -commit 5276d32b87edc9fe3997f5d644f77a61e4ef35b4 -Author: Dr.T.Vasudevan -Date: Wed Mar 20 17:03:04 2013 +0530 - - Updated Tamil translation - - po/ta.po | 963 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 510 insertions(+), 453 deletions(-) - -commit f5065a68ee837ae3e3a923cefb7f57c44ba952f0 -Author: Victor Ibragimov -Date: Tue Mar 19 20:47:11 2013 +0100 - - [l10n] Added Tadjik translation - - po/LINGUAS | 1 + - po/tg.po | 1521 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1522 insertions(+) - -commit 7ef348565130d4f49f56dd590fde4c46656c08da -Author: Felix Riemann -Date: Mon Mar 18 22:33:15 2013 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit f5f03b9df6ab9c9b2a6b39b94a96aac67d5d03ca -Author: Felix Riemann -Date: Mon Mar 18 22:29:44 2013 +0100 - - Prepare for release 3.7.92 - - NEWS | 25 +++++++++++++++++++++++++ - 1 file changed, 25 insertions(+) - -commit ff9df36196a8763db215dc5b9ebaeae2d361ae96 -Author: Carles Ferrando -Date: Sun Mar 17 19:53:45 2013 +0100 - - [l10n] Updated Catalan (Valencian) translation - - po/ca@valencia.po | 294 ++++++++++++++++++++++++++++-------------------------- - 1 file changed, 150 insertions(+), 144 deletions(-) - -commit a0cd6794c963bdd0faf77bd037229fe91c80c586 -Author: Matthias Clasen -Date: Wed Mar 13 23:20:53 2013 -0400 - - Disable color management support on !X - - The color management support uses X root window properties, and - direct Xlib calls. For now, simply disable this code if we are - not using X11. - - https://bugzilla.gnome.org/show_bug.cgi?id=695818 - - src/eog-window.c | 14 ++++++++------ - 1 file changed, 8 insertions(+), 6 deletions(-) - -commit 0ad719ec832bed446a08b734d4a8d98bd76068ac -Author: Changwoo Ryu -Date: Sun Mar 17 01:01:31 2013 +0900 - - Updated Korean translation - - po/ko.po | 349 ++++++++++++++++++++++++--------------------------------------- - 1 file changed, 135 insertions(+), 214 deletions(-) - -commit 64ecbacfea3a013153c392542da1d92bdf03e650 -Author: Balázs Úr -Date: Fri Mar 15 13:23:25 2013 +0100 - - Updated Hungarian translation - - po/hu.po | 277 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 142 insertions(+), 135 deletions(-) - -commit 027fac8642ab6c355da8d52f39c84b8098a89c19 -Author: Duarte Loreto -Date: Thu Mar 14 23:35:45 2013 +0000 - - Updated Portuguese translation and converted to New Spelling (Novo AO) - - po/pt.po | 408 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 206 insertions(+), 202 deletions(-) - -commit 00fcfc8ee53d52c373a03a38c33863d27a065896 -Author: KennethNielsen -Date: Tue Mar 12 23:34:31 2013 +0100 - - Updated Danish translation - - po/da.po | 260 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 132 insertions(+), 128 deletions(-) - -commit 54374091e6ad3e768f88d671d61ad65049389afd -Author: Gil Forcada -Date: Mon Mar 11 23:08:09 2013 +0100 - - [l10n] Updated Catalan translation - - po/ca.po | 256 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 130 insertions(+), 126 deletions(-) - -commit e2857ec68dcaca2961d474387487bf3f50e094de -Author: Jiro Matsuzawa -Date: Sun Mar 10 21:52:32 2013 +0900 - - [l10n] Update Japanese translation - - po/ja.po | 275 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 141 insertions(+), 134 deletions(-) - -commit 92852f43a603b6d8fdfe923ba771a30c99b2cb94 -Author: Dimitris Spingos -Date: Sun Mar 10 06:20:56 2013 +0200 - - Updated Greek translation - - help/el/el.po | 24 ++++++++++++++---------- - 1 file changed, 14 insertions(+), 10 deletions(-) - -commit 6072c344721cbb354a59c974cb6d29de01093d11 -Author: Khaled Hosny -Date: Sat Mar 9 18:35:35 2013 +0200 - - Update Arabic translation - - po/ar.po | 276 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 140 insertions(+), 136 deletions(-) - -commit 9ed8c211a9782551a9412588a158aab08510a074 -Author: Ville-Pekka Vainio -Date: Thu Mar 7 20:44:20 2013 +0200 - - Finnish translation update by Jiri Grönroos - - po/fi.po | 276 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 141 insertions(+), 135 deletions(-) - -commit 7133f826aee58c35148106392850b80772373d31 -Author: Ihar Hrachyshka -Date: Thu Mar 7 16:10:31 2013 +0300 - - Updated Belarusian translation. - - po/be.po | 263 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 134 insertions(+), 129 deletions(-) - -commit 9957625f63a19aff35f28f6d3a2987ea6480a594 -Author: Nilamdyuti Goswami -Date: Wed Mar 6 13:01:16 2013 +0530 - - Assamese translation updated for gnome 3.8 - - po/as.po | 374 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 205 insertions(+), 169 deletions(-) - -commit 7cb2045e1ab224707eda4ea521f9af0667fad6ca -Author: Mario Blättermann -Date: Tue Mar 5 22:50:19 2013 +0100 - - [l10n] Updated German translation - - po/de.po | 22 +++++++++++----------- - 1 file changed, 11 insertions(+), 11 deletions(-) - -commit 864ccf2a3b7d550dea47e93100a5248d3eab74dc -Author: Felix Riemann -Date: Tue Mar 5 19:00:20 2013 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 72a84ce19f3d2d3e89005b32ba99ee06c90308b4 -Author: Felix Riemann -Date: Tue Mar 5 18:56:02 2013 +0100 - - Prepare for release 3.7.91 - - NEWS | 19 +++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 20 insertions(+), 1 deletion(-) - -commit 4280ca848981aeaba373b47010ff195af65f1be2 -Author: Nguyễn Thái Ngọc Duy -Date: Sat Mar 2 21:59:37 2013 +0700 - - Updated Vietnamese translation - - po/vi.po | 12 ++++-------- - 1 file changed, 4 insertions(+), 8 deletions(-) - -commit 6e37acd15672ffb95d9ecb9d8016971a265540da -Author: Nguyễn Thái Ngọc Duy -Date: Sat Mar 2 21:58:51 2013 +0700 - - po/vi: import from Damned Lies - - po/vi.po | 270 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 140 insertions(+), 130 deletions(-) - -commit 51939dfe3c3ad733cfd9cd2855194c62e6e0522d -Author: Claudio Saavedra -Date: Fri Mar 1 16:52:33 2013 +0200 - - eog.doap: Remove myself - - eog.doap | 7 ------- - src/eog-window.c | 2 +- - 2 files changed, 1 insertion(+), 8 deletions(-) - -commit ef682a45c90a7d953c71f03bbf8e66849abfe439 -Author: A S Alam -Date: Fri Feb 22 14:59:25 2013 +0000 - - Punjabi: Translation updated (aalam) - - po/pa.po | 276 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 141 insertions(+), 135 deletions(-) - -commit 1126065694b3d1938c83bc85e1a9a9e3218c933b -Author: Alexandre Franke -Date: Wed Feb 20 21:21:38 2013 +0100 - - Update French translation - - po/fr.po | 271 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 139 insertions(+), 132 deletions(-) - -commit d4b6409f8a06c351da841cf9b5261a2a6eac35a2 -Author: Rūdolfs Mazurs -Date: Wed Feb 20 12:24:45 2013 +0200 - - Updated Latvian translation - - po/lv.po | 314 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 158 insertions(+), 156 deletions(-) - -commit febe46b02cbed7e464bf7287dc2d6aeb539962e9 -Author: Aleksej Kabanov -Date: Wed Feb 20 09:54:01 2013 +0400 - - Updated Russian translation - - po/ru.po | 282 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 143 insertions(+), 139 deletions(-) - -commit 3040c2f657ae4bc14170c0c7ced664475f039d7e -Author: Marek Černocký -Date: Sun Feb 17 23:34:00 2013 +0100 - - Updated Czech translation - - po/cs.po | 268 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 136 insertions(+), 132 deletions(-) - -commit 02ae828a3dfb231d19c4bc168d5fb26d22b26d13 -Author: Gheyret Kenji -Date: Sat Feb 16 12:30:57 2013 +0900 - - Updated Uyghur translation - - Signed-off-by: Gheyret Kenji - - po/ug.po | 45 +++++++++++++-------------------------------- - 1 file changed, 13 insertions(+), 32 deletions(-) - -commit adef4664a87e41584963a9926f931a8e6472675e -Author: Chao-Hsiung Liao -Date: Mon Feb 4 06:42:50 2013 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 274 +++++++++++++++++++++++++++++++----------------------------- - po/zh_TW.po | 274 +++++++++++++++++++++++++++++++----------------------------- - 2 files changed, 282 insertions(+), 266 deletions(-) - -commit d75df2b48e48a2e55235d16102a25d1e7f3c0134 -Author: Anish A -Date: Sat Feb 2 21:23:15 2013 +0400 - - Updated Malayalam Localization - - po/ml.po | 5499 +++++++++++++++----------------------------------------------- - 1 file changed, 1325 insertions(+), 4174 deletions(-) - -commit e35cb69fd4a3cdd4202f7bb406d883ac314fdc80 -Author: Anish A -Date: Sat Feb 2 21:15:51 2013 +0400 - - Updated Malayalam Localization - - po/ml.po | 5517 +++++++++++++++++++++++++++++++++++++++++++++++--------------- - 1 file changed, 4187 insertions(+), 1330 deletions(-) - -commit e6f8b4d2a317baa67d9dd8b70bc8f9089264bbb9 -Author: Inaki Larranaga Murgoitio -Date: Thu Jan 31 13:19:40 2013 +0100 - - Updated Basque language - - po/eu.po | 1017 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 518 insertions(+), 499 deletions(-) - -commit 31837030c60e850ca6a22b263f1f19f98c875d92 -Author: Fabio Tomat -Date: Sat Jan 19 12:15:06 2013 +0100 - - Updated Friulian translation - - po/fur.po | 893 +++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 411 insertions(+), 482 deletions(-) - -commit 700dd09935809a8496b67f7369a85296cbea8a54 -Author: Мирослав Николић -Date: Fri Jan 18 11:19:59 2013 +0100 - - Updated Serbian translation - - po/sr.po | 271 +++++++++++++++++++++++++++++---------------------------- - po/sr@latin.po | 271 +++++++++++++++++++++++++++++---------------------------- - 2 files changed, 280 insertions(+), 262 deletions(-) - -commit 58edc9a4eb7064392b0b5c39ea32245e774eb553 -Author: Felix Riemann -Date: Mon Jan 14 19:40:07 2013 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ab5c16869f81374ff0e18d9b53e89b78b88ea595 -Author: Felix Riemann -Date: Mon Jan 14 19:35:32 2013 +0100 - - Prepare for release 3.7.4 - - NEWS | 29 +++++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 30 insertions(+), 1 deletion(-) - -commit b13d8592c0cca05ccb9a6d1038e834fbb97c8b73 -Author: Felix Riemann -Date: Mon Jan 14 19:32:22 2013 +0100 - - Add XDG_DATA_DIRS to plugin search path - - Also add some debug output to ease debugging possible problems later. - - https://bugzilla.gnome.org/show_bug.cgi?id=690282 - - src/eog-plugin-engine.c | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - -commit 60dac617692b5d55e67aa62f8294887d66c5366a -Author: Theppitak Karoonboonyanan -Date: Mon Jan 14 20:54:14 2013 +0700 - - Updated Thai translation - - po/th.po | 274 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 139 insertions(+), 135 deletions(-) - -commit dcde16bbffc953c3e8c6942cb04c6fd48c4aee89 -Author: Florian Müllner -Date: Fri Jan 11 15:39:20 2013 +0100 - - Use q shortcut to quit the application - - Currently q is used as a synonym for w/Escape, - e.g. it closes the active window. Make it quit the application - instead, which is what most other GNOME applications do. - - https://bugzilla.gnome.org/show_bug.cgi?id=691552 - - data/eog-app-menu.xml | 1 + - src/eog-window.c | 2 -- - 2 files changed, 1 insertion(+), 2 deletions(-) - -commit 3145fce6d7544dfb6e159924fb52e2ca13b7a42c -Author: Felix Riemann -Date: Sun Jan 13 16:58:49 2013 +0100 - - EogWindow: Hold a reference on the used ThumbView - - The window uses it during runtime so it should keep a reference - to it. Due to the necessary unref this avoids critical warnings - because of EogThumbView's own disposal routine causing an - unwanted signal emission. - - https://bugzilla.gnome.org/show_bug.cgi?id=691517 - - src/eog-window.c | 12 +++++++++++- - 1 file changed, 11 insertions(+), 1 deletion(-) - -commit e974cf58096495d267ca93cda92cc42c86482b16 -Author: Gheyret Kenji -Date: Sun Jan 13 17:13:37 2013 +0900 - - Updated Uyghur translation - - Signed-off-by: Gheyret Kenji - - po/ug.po | 1393 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 706 insertions(+), 687 deletions(-) - -commit 2aa0407ef87f32b65273acf2faa27e791a8de2e6 -Author: Alexander Shopov -Date: Fri Jan 11 08:50:36 2013 +0200 - - Updated Bulgarian translation - - po/bg.po | 254 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 129 insertions(+), 125 deletions(-) - -commit 5c88417da14b2d190ecdf75c51033d6c22ea7064 -Author: Fabio Tomat -Date: Mon Jan 7 16:19:34 2013 +0100 - - Updated Friulian translation - - po/fur.po | 1935 +++++++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 1235 insertions(+), 700 deletions(-) - -commit df34d7896f9d9288ce5059fb7cd0f7359cebf87c -Author: Enrico Nicoletto -Date: Wed Jan 2 21:04:55 2013 -0200 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 522 ++++++++++++++++++++++++++---------------------------------- - 1 file changed, 227 insertions(+), 295 deletions(-) - -commit 3fcf3d368f664c3da275ee350cbf518d781d979b -Author: Felix Riemann -Date: Wed Jan 2 12:42:52 2013 +0100 - - EogScrollView: Check modifiers for all supported keyboard shortcuts - - Especially check that no modifier key is pressed for zooming. - - https://bugzilla.gnome.org/show_bug.cgi?id=690931 - - src/eog-scroll-view.c | 21 +++++++++++++++------ - 1 file changed, 15 insertions(+), 6 deletions(-) - -commit 9b7962a47d7db472d53dee7c8adbac2d0d5e8dcc -Author: Aurimas Černius -Date: Tue Jan 1 18:35:10 2013 +0200 - - Updated Lithuanian translation - - po/lt.po | 303 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 153 insertions(+), 150 deletions(-) - -commit e19320330bf805e0e0b336363d70499d02b85e82 -Author: Felix Riemann -Date: Sun Dec 30 18:08:59 2012 +0100 - - reload: Add missing license headers - - Assuming that the plugins are in line with Lucas' other contributions - and thus are licensed as GPLv2+. - - https://bugzilla.gnome.org/show_bug.cgi?id=689165 - - plugins/reload/eog-reload-plugin.c | 21 +++++++++++++++++++++ - plugins/reload/eog-reload-plugin.h | 21 +++++++++++++++++++++ - 2 files changed, 42 insertions(+) - -commit 967c22f5c0b3d1e6b90058666d8cae23d77fb03a -Author: Felix Riemann -Date: Sun Dec 30 17:48:02 2012 +0100 - - fullscreen: Add missing license headers - - Assuming that the plugins are in line with Lucas' other contributions - and thus are licensed as GPLv2+. - - https://bugzilla.gnome.org/show_bug.cgi?id=689165 - - plugins/fullscreen/eog-fullscreen-plugin.c | 21 +++++++++++++++++++++ - plugins/fullscreen/eog-fullscreen-plugin.h | 21 +++++++++++++++++++++ - 2 files changed, 42 insertions(+) - -commit 6de1a4cabed6ef2adf86b1cdde1ee9ccf2b9b671 -Author: Felix Riemann -Date: Sun Dec 30 17:42:21 2012 +0100 - - jpegutils: Add missing license headers - - transupp.h is based on the file shipped by gThumb. - - https://bugzilla.gnome.org/show_bug.cgi?id=689165 - - jpegutils/jpegint.h | 23 +++++++++++++++++++++++ - jpegutils/transupp.h | 19 +++++++++++++++++++ - 2 files changed, 42 insertions(+) - -commit 47b1addca635e35efe7345bf710d9c8b1ad965fc -Author: Florencio Neves -Date: Wed Dec 26 05:39:24 2012 -0200 - - Updated Brazilian Portuguese Translation - - po/pt_BR.po | 99 +++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 50 insertions(+), 49 deletions(-) - -commit 3df9ea9cbf8c7747dbf93c1e611c51f53246472f -Author: Richard Stanislavský -Date: Mon Dec 24 15:47:19 2012 +0100 - - Updated Slovak translation - - po/sk.po | 33 +++++++++++++++------------------ - 1 file changed, 15 insertions(+), 18 deletions(-) - -commit 6da8b4b40e16525e136d8176694259bb50c97c1f -Author: Dimitris Spingos -Date: Sun Dec 23 19:14:36 2012 +0200 - - Updated Greek translation - - po/el.po | 552 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 325 insertions(+), 227 deletions(-) - -commit 3ee8acc593524eec5ca8a6e5e782f7ee44cbd138 -Author: Felix Riemann -Date: Wed Dec 19 19:55:09 2012 +0100 - - Don't use XDG_CONFIG_DIR for per-user plugins - - Load them from XDG_USER_DATA_DIR instead to be in line with other - applications using plugins like gnome-shell and gedit. - - https://bugzilla.gnome.org/show_bug.cgi?id=690282 - - src/eog-plugin-engine.c | 5 ++--- - 1 file changed, 2 insertions(+), 3 deletions(-) - -commit 3a74ec42ff91ec0e782b0cd6514e3992ea44890a -Author: Mattias Põldaru -Date: Wed Dec 19 15:39:29 2012 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 13 ++++++++----- - 1 file changed, 8 insertions(+), 5 deletions(-) - -commit 6faa4b0cf46a9e436a06169d5a2cf98b14654d20 -Author: Richard Stanislavský -Date: Wed Dec 12 22:39:08 2012 +0100 - - Updated slovak translation - - po/sk.po | 1662 ++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 964 insertions(+), 698 deletions(-) - -commit 252747ea73197ff0c9e52980907dd7bdd79951d7 -Author: Felix Riemann -Date: Sat Dec 1 20:21:42 2012 +0100 - - Simplify setting print-to-file basename - - The logic that was used to determine the basename was - moved to eog_image_get_caption(). - - src/eog-window.c | 27 +++++++-------------------- - 1 file changed, 7 insertions(+), 20 deletions(-) - -commit e7bf0daef3c73bedcce3b59f59bcb8886003fed3 -Author: Felix Riemann -Date: Sat Dec 1 20:15:56 2012 +0100 - - Make eog_image_get_caption() use GFileInfo - - GFileInfo has everything needed to get a UTF8-formatted filename - that can be displayed in the UI. - - src/eog-image.c | 77 +++++++++------------------------------------------------ - 1 file changed, 11 insertions(+), 66 deletions(-) - -commit c3b0e67b9ee1d7dc1d49be93a25bc4e50a8fafbb -Author: Felix Riemann -Date: Sat Dec 1 20:00:36 2012 +0100 - - Don't save the print-to-file output URI. - - This would break the print-to-file basename feature. - - https://bugzilla.gnome.org/show_bug.cgi?id=683335 - - src/eog-print.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit cb4907899494f083facbca5bb7c86aa2cc0f88ab -Author: Felix Riemann -Date: Sat Dec 1 19:59:39 2012 +0100 - - Raise GTK+ dependency for print-to-file basename - - https://bugzilla.gnome.org/show_bug.cgi?id=683335 - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit b60f391c595936088df8c9fcdcb3bf1ac91880a1 -Author: Federico Mena Quintero -Date: Tue Sep 4 09:59:45 2012 -0500 - - bgo#683335 - Set the basename for print-to-file - - Per https://live.gnome.org/GnomeGoals/PrintToFile , GTK+ 3.6 lets the application set a filename - for the print-to-file command so that GTK+ can present a better default than just 'output.pdf'. - - Signed-off-by: Federico Mena Quintero - - src/eog-window.c | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - -commit 59742ad1ad828f07f48eb2b1206197d83279310d -Author: Piotr Drąg -Date: Tue Nov 27 17:05:29 2012 +0100 - - Updated Polish translation - - po/pl.po | 288 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 146 insertions(+), 142 deletions(-) - -commit 3cc54c3ccc058a463ee71a977ad701293819c863 -Author: Fran Diéguez -Date: Thu Nov 22 17:58:44 2012 +0100 - - Updated Galician translations - - po/gl.po | 294 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 150 insertions(+), 144 deletions(-) - -commit 29d324c5f8fb09da7a5f810770627490f5fa0a8f -Author: Felix Riemann -Date: Wed Nov 21 00:24:09 2012 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0aaeef8389d3b8e9a0f181eaedf20d5fb3ea6e72 -Author: Felix Riemann -Date: Wed Nov 21 00:17:20 2012 +0100 - - Prepare for release 3.7.2 - - NEWS | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - -commit e48ca60f44fef3e61b11d1d75cd3569b3b622212 -Author: Felix Riemann -Date: Fri Nov 9 21:41:12 2012 +0100 - - Remove unneeded export-symbols-regex libtool parameter - - The used regex seems to be broken and is causing trouble on BSD. - Drop it as doesn't seem to have an effect on the symbol list anyway. - - src/Makefile.am | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit d8cd1a756c8b4df10e097be90657763b3b34d311 -Author: Yaron Shahrabani -Date: Fri Nov 9 12:07:38 2012 +0200 - - Updated Hebrew translation. - - po/he.po | 301 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 152 insertions(+), 149 deletions(-) - -commit dbf25d3df369809b31d9e313d68b603eb3b12ece -Author: Felix Riemann -Date: Tue Nov 6 19:12:57 2012 +0100 - - [toolbar-editor] Fix warnings due to wrong includes - - cut-n-paste/toolbar-editor/Makefile.am | 4 ---- - 1 file changed, 4 deletions(-) - -commit 84c746b2b23e8a0b80ee9e7f18a4414707cc8002 -Author: Felix Riemann -Date: Tue Nov 6 19:08:45 2012 +0100 - - Fix build breakage due to void pointer arithmetic - - With recent gnome-common the build fails due to the arithmetics - using void pointers. Use the correct pointers to fix that. - - https://bugzilla.gnome.org/show_bug.cgi?id=687755 - - src/eog-metadata-reader-jpg.c | 6 ++++-- - src/eog-metadata-reader-png.c | 8 ++++---- - 2 files changed, 8 insertions(+), 6 deletions(-) - -commit 5fd3bb978fc4304aa4344ce3a930c9f90cac801c -Author: Kjartan Maraas -Date: Mon Nov 5 19:25:31 2012 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 266 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 135 insertions(+), 131 deletions(-) - -commit 3068be9add238a0966ccb7c381689eff96389ea1 -Author: Andika Triwidada -Date: Sat Oct 27 15:22:32 2012 +0700 - - Updated Indonesian translation - - po/id.po | 288 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 145 insertions(+), 143 deletions(-) - -commit 43c11bf6bf752884ff32854c51639e5a49895e7a -Author: OKANO Takayoshi -Date: Fri Oct 26 23:12:03 2012 +0900 - - [l10n] Update Japanese Translation. - - help/ja/ja.po | 18 +++++++++--------- - 1 file changed, 9 insertions(+), 9 deletions(-) - -commit 3e525fc78379439e04d260ebad073f20530274d7 -Author: Yasumichi Akahoshi -Date: Fri Oct 26 23:09:32 2012 +0900 - - [l10n] remove location info. - - help/ja/ja.po | 473 ---------------------------------------------------------- - 1 file changed, 473 deletions(-) - -commit 50fa44faea08941e4cf8f56631560b51d8d8439a -Author: Felix Riemann -Date: Mon Oct 22 23:17:20 2012 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 6fd093f4afcc7a771e6e15444070a3d16fcd4335 -Author: Felix Riemann -Date: Mon Oct 22 23:11:02 2012 +0200 - - Prepare for release 3.7.1 - - NEWS | 35 +++++++++++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 36 insertions(+), 1 deletion(-) - -commit bf30cde502ac47d89754a4668f9dfa8edfc9e570 -Author: Daniel Mustieles -Date: Wed Oct 17 18:26:30 2012 +0200 - - Updated Spanish translation - - po/es.po | 289 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 148 insertions(+), 141 deletions(-) - -commit 5f239173232f2c9fb57a7ed02b5ed214b530bcb1 -Author: Hendrik Knackstedt -Date: Tue Oct 16 10:47:01 2012 +0200 - - Updated German translation - - po/de.po | 298 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 152 insertions(+), 146 deletions(-) - -commit b23508382f0131d9961e437fe8c8453adeb84faa -Author: Felix Riemann -Date: Sat Oct 13 14:12:38 2012 +0200 - - Add additional key codes for image switching using mouse buttons - - This should re-establish that function for newer X setups. - As we don't know whether the old keycodes could still occur, - we simply keep for compatibility. - - https://bugzilla.gnome.org/show_bug.cgi?id=684179 - - src/eog-window.c | 5 +++++ - 1 file changed, 5 insertions(+) - -commit 3fa5f85199c2aa8ff84beb1e67d70da0daf8769a -Author: Daniel Mustieles -Date: Sat Oct 13 12:32:28 2012 +0200 - - Updated Spanish translation - - help/es/es.po | 18 +++++++++++------- - 1 file changed, 11 insertions(+), 7 deletions(-) - -commit 42eefef163354b5c651e396995b6f8f1d28c3ff7 -Author: Felix Riemann -Date: Fri Oct 12 20:13:18 2012 +0200 - - Add trailing semicolon to desktop file keyword list translations - - Makes the desktop file validate again with desktop-file-utils-0.20. - - https://bugzilla.gnome.org/show_bug.cgi?id=685923 - - po/el.po | 2 +- - po/km.po | 2 +- - po/ml.po | 2 +- - 3 files changed, 3 insertions(+), 3 deletions(-) - -commit 9578d827cab8d853f93bad4de8f78687b1cadaac -Author: Alexandre Rostovtsev -Date: Wed Oct 10 19:16:26 2012 -0400 - - Add 2DGraphics category to .desktop file - - Required to pass validation with desktop-file-utils 0.20 - - https://bugzilla.gnome.org/show_bug.cgi?id=685923 - - data/eog.desktop.in.in | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 05a3acdb672039eaf031e94de0a694289ec5973a -Author: Wouter Bolsterlee -Date: Sat Oct 6 14:59:25 2012 +0200 - - Updated Dutch translation - - po/nl.po | 385 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 200 insertions(+), 185 deletions(-) - -commit 9a1c01a65386359fc9f57a46a9e79906dd8f08a5 -Author: Matej Urbančič -Date: Sat Oct 6 12:57:41 2012 +0200 - - Updated Slovenian translation - - po/sl.po | 300 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 153 insertions(+), 147 deletions(-) - -commit 04369bbe464389601de1fd553e89b0865cd35a29 -Author: Martin Olsson -Date: Sat Sep 29 20:28:57 2012 +0200 - - Fix spelling errors in eog - - https://bugzilla.gnome.org/show_bug.cgi?id=685106 - - NEWS | 6 +++--- - help/bg/eog.xml | 2 +- - src/eog-exif-details.c | 2 +- - src/eog-metadata-reader.c | 2 +- - src/eog-pixbuf-util.c | 2 +- - src/eog-print-preview.c | 2 +- - src/eog-util.c | 2 +- - src/eog-window.c | 4 ++-- - 8 files changed, 11 insertions(+), 11 deletions(-) - -commit 3f43a6eff5f9c5fe2308f08a9e6d4cfba9453c35 -Author: Yuri Myasoedov -Date: Wed Oct 3 21:49:04 2012 +0400 - - Updated Russian translation - - help/ru/ru.po | 5054 +++++++++++++++++++++++++++++++++++++++++++-------------- - 1 file changed, 3810 insertions(+), 1244 deletions(-) - -commit b795521633083ed98d40de19a8a62fd1f55430ed -Author: Khoem Sokhem -Date: Wed Oct 3 17:44:00 2012 +0200 - - [l10n] Added Khmer translation - - po/LINGUAS | 1 + - po/km.po | 1585 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1586 insertions(+) - -commit cc958f1201e12dc0a634ffc45995dd53b4793b19 -Author: Felix Riemann -Date: Fri Sep 28 19:43:26 2012 +0200 - - help: rename "Set as Desktop Background" -> "Set as Wallpaper" - - To match the recent UI string change. - - https://bugzilla.gnome.org/show_bug.cgi?id=684098 - - help/C/desktop-background.page | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 166a24f31454e9b1169c235fe6fc2494d91f55f8 -Author: Cosimo Cecchi -Date: Mon Sep 17 10:43:51 2012 -0400 - - window: rename "Set as Desktop Background" -> "Set as Wallpaper" - - To be consistent with Nautilus. - - https://bugzilla.gnome.org/show_bug.cgi?id=684098 - - src/eog-window.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 01c1055062a23a56dff951d9d9e41a0605a8509b -Author: Felix Riemann -Date: Sun Sep 23 17:56:08 2012 +0200 - - Drop now unneeded TotemScrSaver - - It's not needed anymore since GtkApplication does the job now. - - https://bugzilla.gnome.org/show_bug.cgi?id=684581 - - configure.ac | 1 - - cut-n-paste/Makefile.am | 2 +- - cut-n-paste/totem-screensaver/Makefile.am | 15 - - cut-n-paste/totem-screensaver/README | 3 - - cut-n-paste/totem-screensaver/totem-scrsaver.c | 547 ------------------------- - cut-n-paste/totem-screensaver/totem-scrsaver.h | 57 --- - doc/reference/Makefile.am | 2 - - 7 files changed, 1 insertion(+), 626 deletions(-) - -commit e8b50ab48a5a068ee56a29f9709b499d03781d4a -Author: Felix Riemann -Date: Sun Sep 23 17:50:02 2012 +0200 - - Use GtkApplication to inhibit the screensaver during slideshows - - Realized in a similar fashion as in Evince and Totem. - - https://bugzilla.gnome.org/show_bug.cgi?id=684581 - - configure.ac | 2 +- - src/Makefile.am | 5 ----- - src/eog-application-internal.h | 3 --- - src/eog-application.c | 30 ------------------------------ - src/eog-application.h | 4 ---- - src/eog-window.c | 39 +++++++++++++++++++++++++++++++++++++-- - 6 files changed, 38 insertions(+), 45 deletions(-) - -commit 25587b23f14c584bbeecef3992128754b26ce5ae -Author: Felix Riemann -Date: Tue Oct 2 19:23:41 2012 +0200 - - Post-branch version bump - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 6ccc7d2e946b5ac8dbf6284f0e2d3827e86a5c31 -Author: Aleix Badia i Bosch -Date: Fri Sep 28 00:04:28 2012 +0200 - - [l10n] Updated Catalan documentation - - help/ca/ca.po | 4233 +++++++++++++++++++++++++++++++++++++++------------------ - 1 file changed, 2879 insertions(+), 1354 deletions(-) - -commit 70491464632ddd1a9e023a659b0427314c64914a -Author: Carles Ferrando -Date: Wed Sep 26 01:34:27 2012 +0200 - - [l10n] Updated Catalan (Valencian) translation - - po/ca@valencia.po | 359 +++++++++++++++++++++++++++--------------------------- - 1 file changed, 182 insertions(+), 177 deletions(-) - -commit 6ee51c7810a6cd991fcf5cb65f60f0fa822a6d3a -Author: Gil Forcada -Date: Wed Sep 26 01:34:16 2012 +0200 - - [l10n] Updated Catalan translation - - po/ca.po | 397 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 203 insertions(+), 194 deletions(-) - -commit 0f34a53e48e8718d58b0c5be87d7202f1ec41502 -Author: Daniel Korostil -Date: Tue Sep 25 21:47:27 2012 +0300 - - Added uk translation - - po/uk.po | 384 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 199 insertions(+), 185 deletions(-) - -commit b07d0f6a71c7c49e97ecf57b478d09fa601ca877 -Author: Felix Riemann -Date: Mon Sep 24 22:54:24 2012 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ca32e07725eeeb10fbc1f2592c330cd66ab9f679 -Author: Felix Riemann -Date: Mon Sep 24 22:49:49 2012 +0200 - - Prepare for release 3.6.0 - - NEWS | 22 ++++++++++++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 24 insertions(+), 2 deletions(-) - -commit 0eade78af347a8beb65171ed0959b40851b54c8e -Author: Tom Tryfonidis -Date: Mon Sep 24 13:30:46 2012 +0300 - - Updated Greek help translation - - help/el/el.po | 27 ++++++++++----------------- - 1 file changed, 10 insertions(+), 17 deletions(-) - -commit 040c4474225ec6234bf74cc8458aaeec5691f62b -Author: Mattias Põldaru -Date: Mon Sep 24 10:43:09 2012 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 101 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 54 insertions(+), 47 deletions(-) - -commit d1519054fd621cc4148ac39ed6b5a66f9dc6497e -Author: Fran Diéguez -Date: Sun Sep 23 21:27:53 2012 +0200 - - Updated Galician translations - - help/gl/gl.po | 4519 +++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 2461 insertions(+), 2058 deletions(-) - -commit 91d3bff55f087d331d9e8e9dded7e40895f2c63c -Author: Praveen Arimbrathodiyil -Date: Sun Sep 23 10:14:44 2012 +0530 - - Malayalam translation update from Anish A - - po/ml.po | 1023 +++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 545 insertions(+), 478 deletions(-) - -commit 170701c7381cf8cd469c31fbf01712b3bed5fba8 -Author: YunQiang Su -Date: Sun Sep 23 03:10:39 2012 +0800 - - update Simplified Chinese (zh_CN) translation - - po/zh_CN.po | 374 +++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 195 insertions(+), 179 deletions(-) - -commit 1d89b1399d0aff24907f8fcc3e561209f97279d4 -Author: Anita Reitere -Date: Sat Sep 22 21:05:21 2012 +0300 - - Updated Latvian translation - - po/lv.po | 480 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 247 insertions(+), 233 deletions(-) - -commit c7db33e3ef4765c80f446ec76725984b6605ef59 -Author: Rajesh Ranjan -Date: Sat Sep 22 15:50:31 2012 +0530 - - hindi update - - po/hi.po | 1568 +++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 827 insertions(+), 741 deletions(-) - -commit e825d3588b37cbaae9bf4eec5529c3444e33daa0 -Author: Andrej Žnidaršič -Date: Fri Sep 21 11:01:11 2012 +0200 - - Updated Slovenian translation - - help/sl/sl.po | 2990 ++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 1583 insertions(+), 1407 deletions(-) - -commit 749437a34ddc2857f88168fc75f8ac585d5b8ea7 -Author: Kalev Lember -Date: Wed Sep 19 21:50:08 2012 +0200 - - Explicitly link against libm - - https://bugzilla.gnome.org/show_bug.cgi?id=684401 - - configure.ac | 7 +++++++ - src/Makefile.am | 3 ++- - 2 files changed, 9 insertions(+), 1 deletion(-) - -commit 6047190310d22baa6933b3e31b4551a2752736bf -Author: Alexander Shopov -Date: Wed Sep 19 20:55:41 2012 +0300 - - Updated Bulgarian translation - - po/bg.po | 342 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 175 insertions(+), 167 deletions(-) - -commit f690bd8b1ee43eb7e1c157c4c422fd54e40a67d9 -Author: Felix Riemann -Date: Wed Sep 19 18:31:43 2012 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 1d4f5a79a8aca03834b67c3e396a0072ad70d315 -Author: Felix Riemann -Date: Wed Sep 19 18:20:04 2012 +0200 - - Prepare for release 3.5.92 - - NEWS | 34 ++++++++++++++++++++++++++++++++++ - 1 file changed, 34 insertions(+) - -commit 81375bd523173b4e76d2bc3aac9c09b1063198cf -Author: Dr.T.Vasudevan -Date: Wed Sep 19 16:52:54 2012 +0530 - - updated Tamil translation - - po/ta.po | 373 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 191 insertions(+), 182 deletions(-) - -commit 6e3bd83c946d4a932393acfff47f778843e49331 -Author: Michael Wood -Date: Mon Sep 17 11:34:59 2012 +0100 - - Set the saved value for the number of copies printed to 1 - - This avoids accidentally printing the wrong amount as this value is not - expected to be restored from previous sessions. - - https://bugzilla.gnome.org/show_bug.cgi?id=623604 - - src/eog-print.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -commit bca0db855613ba1ed197710a1f9517f3e52aa7f7 -Author: Daniel Mustieles -Date: Sun Sep 16 13:15:42 2012 +0200 - - Updated Spanish translation - - po/es.po | 265 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 132 insertions(+), 133 deletions(-) - -commit 2b798ac9b6e7b48267265480c414190ee625ff89 -Author: Ask H. Larsen -Date: Sun Sep 16 13:13:06 2012 +0200 - - Updated Danish translation - - po/da.po | 388 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 200 insertions(+), 188 deletions(-) - -commit 3832a75bc6c7a6aae650db23aa76c4a4ae9f3fbb -Author: Piotr Drąg -Date: Fri Sep 14 18:31:21 2012 +0200 - - Fix broken tag in Galician help translation - - help/gl/gl.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d6edf2d1e0791d43b021447fa3e7a3f205980eb4 -Author: Gabor Kelemen -Date: Fri Sep 14 10:52:06 2012 +0200 - - Update Hungarian help translation - - help/hu/hu.po | 4542 +++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 2486 insertions(+), 2056 deletions(-) - -commit 1882feb9160655eb35126e024943da7362c92c27 -Author: Piotr Drąg -Date: Thu Sep 13 20:57:04 2012 +0200 - - Fix broken tags in Latvian help translation - - help/lv/lv.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit a021d901b2164882747a938f463669d18191aea3 -Author: Daniel Mustieles -Date: Thu Sep 13 12:06:35 2012 +0200 - - Updated Spanish translation - - help/es/es.po | 15 +++++---------- - 1 file changed, 5 insertions(+), 10 deletions(-) - -commit 132c809856a657e742fe59d07a00a24731c72e2f -Author: Timo Jyrinki -Date: Wed Sep 12 18:47:01 2012 +0300 - - Finnish translation update by Jiri Grönroos - - po/fi.po | 637 +++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 399 insertions(+), 238 deletions(-) - -commit 131068e5a4d766020511001f2e4dabd53b028153 -Author: Alexandre Franke -Date: Tue Sep 11 19:18:31 2012 +0200 - - Fix French translation for real - - help/fr/fr.po | 395 +++++++++++++++++----------------------------------------- - 1 file changed, 117 insertions(+), 278 deletions(-) - -commit 8b1995c2d664b6394fc01975023dd7c5fe4af7fc -Author: Alexandre Franke -Date: Tue Sep 11 19:06:53 2012 +0200 - - Fix French translation - - help/fr/fr.po | 4661 +++++++++++++++++++++++++++++++-------------------------- - po/fr.po | 4367 ++++++++++++++++++----------------------------------- - 2 files changed, 3980 insertions(+), 5048 deletions(-) - -commit 0c37becd6113c66f40cd5f8cccfd0bf1232f59ad -Author: Alexandre Franke -Date: Tue Sep 11 18:49:39 2012 +0200 - - Update French translation - - po/fr.po | 4367 ++++++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 2947 insertions(+), 1420 deletions(-) - -commit 59afab38a1ff97b6ba73c2631cc341040db12e35 -Author: Gianvito Cavasoli -Date: Mon Sep 10 21:15:56 2012 +0200 - - [l10n] Updated Italian translation. - - po/it.po | 992 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 500 insertions(+), 492 deletions(-) - -commit 04dbac694b2864ae5f803cdcc9843c0e4f34e023 -Author: Alexandre Franke -Date: Mon Sep 10 09:22:30 2012 +0200 - - Update French translation - - po/fr.po | 330 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 169 insertions(+), 161 deletions(-) - -commit a1dc614aaf4b59e80eeae46a09400207f09cf013 -Author: Nguyễn Thái Ngọc Duy -Date: Sun Sep 9 20:28:12 2012 +0700 - - Updated Vietnamese translation - - po/vi.po | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -commit 4406cdea75e3587c9aa1d9e9e39cab9a013f3960 -Author: Changwoo Ryu -Date: Sun Sep 9 06:02:08 2012 +0900 - - Updated Korean translation - - po/ko.po | 389 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 200 insertions(+), 189 deletions(-) - -commit 66aa3fd35d46230a0e49f77ce959cdb53234734f -Author: Marek Černocký -Date: Sat Sep 8 00:33:57 2012 +0200 - - Updated Czech translation - - po/cs.po | 399 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 204 insertions(+), 195 deletions(-) - -commit 7a54f606d26270fc0cc1c029bccba0e6189a9c1b -Author: Tom Tryfonidis -Date: Sat Sep 8 00:14:11 2012 +0300 - - Updated Greek help translation - - help/el/el.po | 131 +++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 69 insertions(+), 62 deletions(-) - -commit f33a7b7c5d0690a916908bc033a3ae2f53c1d022 -Author: Felix Riemann -Date: Fri Sep 7 18:57:15 2012 +0200 - - Raise librsvg dependency to 2.36.2 - - The old minimum version (2.26.0) is pretty old and behind with - bugfixes and features. Raising the minimum librsvg version to 2.36.2 - allows dropping some compatibility ifdefs and code. It also fixes - several compiler warnings when compiling against newer librsvgs. - - configure.ac | 2 +- - src/eog-image.c | 1 - - src/eog-print.c | 2 +- - src/eog-scroll-view.c | 1 - - src/main.c | 7 ------- - 5 files changed, 2 insertions(+), 11 deletions(-) - -commit 0354d06a99fdf6ff56cce258447637a0d7c64282 -Author: Ihar Hrachyshka -Date: Fri Sep 7 17:51:02 2012 +0300 - - Updated Belarusian translation. - - po/be.po | 325 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 166 insertions(+), 159 deletions(-) - -commit 34df0c697b81865ecff5e0b1f928ad4bd5998867 -Author: Theppitak Karoonboonyanan -Date: Thu Sep 6 21:27:43 2012 +0700 - - Updated Thai translation. - - po/th.po | 1333 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 667 insertions(+), 666 deletions(-) - -commit 4e8771c469685cb8846fe8a4c6f19d3d994039d9 -Author: Fábio Nogueira -Date: Thu Sep 6 09:14:35 2012 -0400 - - Updated Brazilian Portuguese translation. - - po/pt_BR.po | 420 +++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 216 insertions(+), 204 deletions(-) - -commit e1b3b54fd818079e628681e5c23d3d981857bacd -Author: Arash Mousavi -Date: Thu Sep 6 17:05:52 2012 +0430 - - l10n: Updated Persian translation - - po/fa.po | 644 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 362 insertions(+), 282 deletions(-) - -commit 6471f33009ababf64a079155c3a472f9a3cfb37e -Author: Bruce Cowan -Date: Wed Sep 5 19:38:19 2012 +0100 - - Updated British English translation - - po/en_GB.po | 380 +++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 196 insertions(+), 184 deletions(-) - -commit de7fd620d42e8d012e845ad49fc85e020974142c -Author: Mario Blättermann -Date: Tue Sep 4 21:51:20 2012 +0200 - - [l10n] Updated German doc translation - - help/de/de.po | 23 +++++++++++++++-------- - 1 file changed, 15 insertions(+), 8 deletions(-) - -commit 6f8c4f332f2a5ce34a175ab174ce996ed6664bb8 -Author: Gabor Kelemen -Date: Tue Sep 4 09:17:07 2012 +0200 - - Updated Hungarian translation - - po/hu.po | 976 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 498 insertions(+), 478 deletions(-) - -commit 22e1750ce9b90a2c0ab1a98cc34b2b982c81b6c2 -Author: Felix Riemann -Date: Mon Sep 3 22:55:57 2012 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 5875e4f75f2f956d8fc809d9b4904266f677cf6b -Author: Felix Riemann -Date: Mon Sep 3 22:51:24 2012 +0200 - - Prepare for release 3.5.91 - - NEWS | 30 ++++++++++++++++++++++++++++++ - 1 file changed, 30 insertions(+) - -commit 7bf71e971a4a7936a515bb1dfb6c461f5af2c927 -Author: Daniel Mustieles -Date: Mon Sep 3 15:56:09 2012 +0200 - - Updated Spanish translation - - help/es/es.po | 116 ++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 60 insertions(+), 56 deletions(-) - -commit 4737e08a6c3f8648d36e7bec84bbd63feb89152a -Author: A S Alam -Date: Mon Sep 3 07:26:07 2012 +0530 - - update Punjabi Translation - - po/pa.po | 398 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 206 insertions(+), 192 deletions(-) - -commit 0d881cfd227e6a8f5129c1c1b0d2edcf35215505 -Author: Mario Blättermann -Date: Sun Sep 2 20:20:46 2012 +0200 - - [l10n] Updated German doc translation - - help/de/de.po | 4994 ++++++++++++++++++++++++++------------------------------- - 1 file changed, 2263 insertions(+), 2731 deletions(-) - -commit cac1af13496cd041d1fdbdb075ea1240d2101acb -Author: Paul Seyfert -Date: Sun Sep 2 10:33:59 2012 +0200 - - [l10n] Updated German translation - - po/de.po | 355 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 182 insertions(+), 173 deletions(-) - -commit 72d060af4afc422bf0a86807ce122d66ba84ece1 -Author: Piotr Drąg -Date: Sat Sep 1 22:14:12 2012 +0200 - - Updated Polish translation - - po/pl.po | 28 ++++++++++++++++++++++------ - 1 file changed, 22 insertions(+), 6 deletions(-) - -commit 22e9c6ce7d7dbc1918a38bf8917e4299271c8e35 -Author: Felix Riemann -Date: Sat Sep 1 18:23:38 2012 +0200 - - help: Fix keys in shortcut list to reflect changed bindings - - https://bugzilla.gnome.org/show_bug.cgi?id=659830 - - help/C/shortcuts.page | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - -commit 43e98cdad65f957cb675957d99943ed64d27e4aa -Author: Felix Riemann -Date: Sat Sep 1 18:16:40 2012 +0200 - - Fix arrow key shortcuts in Go menu to reflect behavioural changes - - https://bugzilla.gnome.org/show_bug.cgi?id=659830 - - src/eog-window.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 2bc5ba9f1cbee4fb1ccf12d9b844e3b69b55f9cf -Author: Federico Mena Quintero -Date: Wed Aug 29 18:41:01 2012 -0500 - - My @gnu.org email doesn't work anymore; fix it with @gnome.org that works. - - AUTHORS | 2 +- - README | 2 +- - src/eog-config-keys.h | 2 +- - src/eog-statusbar.c | 2 +- - src/eog-statusbar.h | 2 +- - src/eog-window.c | 6 +++--- - src/eog-window.h | 2 +- - src/main.c | 2 +- - src/uta.c | 2 +- - src/uta.h | 2 +- - src/zoom.c | 2 +- - src/zoom.h | 2 +- - 12 files changed, 14 insertions(+), 14 deletions(-) - -commit 9fe57cb979e328d9cbe4f9219630c3bd386fe854 -Author: Federico Mena Quintero -Date: Wed Aug 29 18:13:22 2012 -0500 - - bgo#659830 - Arrow keys should always navigate, never scroll - - We use plain arrow keys to navigate the image list, regardless of whether the image is - zoomed or whether it has the focus. We use Alt+arrows to scroll the image. - - This is to make it easier to browse an image collection while at the same time zooming - on images from time to time. - - Signed-off-by: Federico Mena Quintero - - src/eog-scroll-view.c | 70 ++++++++++++++++++++---------------- - src/eog-window.c | 98 +++++++++++++++++---------------------------------- - 2 files changed, 72 insertions(+), 96 deletions(-) - -commit 32cc9464461ef0326d3ecb27a494b1af2d8101eb -Author: Federico Mena Quintero -Date: Wed Aug 29 17:38:11 2012 -0500 - - Test for modifier keys correctly in EogWindow - - See http://developer.gnome.org/gtk3/stable/checklist-modifiers.html for an explanation - of how this works. - - Signed-off-by: Federico Mena Quintero - - https://bugzilla.gnome.org/show_bug.cgi?id=659830 - - src/eog-window.c | 13 ++++++++----- - 1 file changed, 8 insertions(+), 5 deletions(-) - -commit bd4f71ebe5da189495168b34e8b18b3ff5698901 -Author: Duarte Loreto -Date: Wed Aug 29 00:39:04 2012 +0100 - - Updated Portuguese translation - - po/pt.po | 378 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 194 insertions(+), 184 deletions(-) - -commit 4a4a1c4d89990b44a1a2f8837f36fb261348b1ba -Author: Aurimas Černius -Date: Tue Aug 28 23:19:49 2012 +0300 - - Updated Lithuanian translation - - po/lt.po | 431 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 225 insertions(+), 206 deletions(-) - -commit 16baf8ceeb21287ba3e8c3eb306f13d8663c6f2c -Author: Yasumichi Akahoshi -Date: Tue Aug 28 08:35:17 2012 +0900 - - [l10n] Update Japanese translation - - help/ja/ja.po | 3791 ++++++++++++++++++++++++--------------------------------- - 1 file changed, 1588 insertions(+), 2203 deletions(-) - -commit b5c76adf072e2de314d8d22ab0a2816635b8818c -Author: Nilamdyuti Goswami -Date: Mon Aug 27 23:10:31 2012 +0530 - - Implemented FUEL entries to Assamese translation - - po/as.po | 74 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 37 insertions(+), 37 deletions(-) - -commit 5d7190b7b87c1fa6ff0f32b95cbfaed27c8afe10 -Author: Yuri Myasoedov -Date: Sat Aug 25 21:17:45 2012 +0400 - - Updated Russian translation - - po/ru.po | 318 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 162 insertions(+), 156 deletions(-) - -commit e63ebfd8ec8c81c7fbf4a9eb0fe4d437831cd20b -Author: Daniel Mustieles -Date: Fri Aug 24 18:36:53 2012 +0200 - - Updated Spanish translation - - help/es/es.po | 106 +++++++++------------------------------------------------- - 1 file changed, 15 insertions(+), 91 deletions(-) - -commit e89c6c7c8055280ed7f227f8938f2c7cf2275098 -Author: Yasumichi Akahoshi -Date: Thu Aug 23 00:55:13 2012 +0900 - - Fix description about "Fullscreen with double-click" - - Signed-off-by: Yasumichi Akahoshi - - help/C/plugins.page | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -commit 6d4cb470ff22190601a465800afb7d66e57cc22e -Author: Tom Tryfonidis -Date: Thu Aug 23 18:19:58 2012 +0300 - - Updated Greek help translation - - help/el/el.po | 5824 +++++++++++++++++++++++---------------------------------- - 1 file changed, 2326 insertions(+), 3498 deletions(-) - -commit a46aaa337d39c5d14511cf05f72db91ac249fd83 -Author: Nguyễn Thái Ngọc Duy -Date: Wed Aug 22 14:18:36 2012 +0700 - - Updated Vietnamese translation - - po/vi.po | 5 ++--- - 1 file changed, 2 insertions(+), 3 deletions(-) - -commit cff1a24c36a86eb40e52d08dbbd62ed35cadc84d -Author: Nguyễn Thái Ngọc Duy -Date: Wed Aug 22 14:18:14 2012 +0700 - - po/vi: imported from Damned Lies - - po/vi.po | 317 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 163 insertions(+), 154 deletions(-) - -commit c61538808bd8801bc16f3e8f5d2c9d7e1ffe1d9e -Author: Piotr Drąg -Date: Wed Aug 22 00:13:46 2012 +0200 - - Updated Polish translation - - po/pl.po | 990 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 500 insertions(+), 490 deletions(-) - -commit 591e679ce9a5dd53107e191a517bc0980e666242 -Author: Felix Riemann -Date: Mon Aug 20 21:46:41 2012 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 53cba8005b0137eb31a86c5950bee3be652a25ee -Author: Felix Riemann -Date: Mon Aug 20 21:41:49 2012 +0200 - - Prepare for release 3.5.90 - - NEWS | 25 +++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 26 insertions(+), 1 deletion(-) - -commit 06f182b55a846f51708fac1f67ceaca8bcc3198f -Author: Daniel Mustieles -Date: Mon Aug 20 14:13:30 2012 +0200 - - Updated Spanish translation - - help/es/es.po | 4536 ++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 2351 insertions(+), 2185 deletions(-) - -commit c38972da679e5ca0b6c388dfc36d91561f4f8b7a -Author: Felix Riemann -Date: Fri Aug 17 17:29:07 2012 +0200 - - Update git.mk for compatibility with new help docs infrastructure - - Updated to revision 50bfcb24c from https://github.com/behdad/git.mk - - git.mk | 76 +++++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 50 insertions(+), 26 deletions(-) - -commit a0ee3f7cf078b95f0220a3c74ee14a5d895b9b57 -Author: Javier Jardón -Date: Fri Aug 17 02:18:09 2012 +0900 - - Port to new documentation infrastructure - - Use yelp-tools instead gnome-doc-utils - - Makefile.am | 15 ++++----------- - autogen.sh | 2 +- - configure.ac | 8 ++++---- - help/Makefile.am | 13 ++++++------- - src/eog-util.c | 4 ++-- - 5 files changed, 17 insertions(+), 25 deletions(-) - -commit b3e101d703384966956cc5305faa18cfbcf0c538 -Author: Daniel Mustieles -Date: Fri Aug 17 10:31:32 2012 +0200 - - Updated Spanish translation - - po/es.po | 1939 +++++++++++++++++++++++++++++++++++++++++++++++++++++--------- - 1 file changed, 1662 insertions(+), 277 deletions(-) - -commit 7162505f6814685827b8fab03a1679ba7af7f986 -Author: Miguel Rodriguez -Date: Fri Aug 17 10:28:24 2012 +0200 - - Updated Spanish translation - - po/es.po | 1939 +++++++++----------------------------------------------------- - 1 file changed, 277 insertions(+), 1662 deletions(-) - -commit 0b04960ad9b52e50a19aef5a756370201834e306 -Author: Fran Diéguez -Date: Thu Aug 16 23:41:13 2012 +0200 - - Updated Galician translations - - po/gl.po | 298 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 149 insertions(+), 149 deletions(-) - -commit f231a2b4272be2adb66ebbec3a00cf01245bf2a6 -Author: Daniel Mustieles -Date: Mon Aug 13 10:44:45 2012 +0200 - - Updated Spanish translation - - help/es/es.po | 551 +++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 370 insertions(+), 181 deletions(-) - -commit 78a214b3a3359e72fa4cdf62b37bbc45bf9810c4 -Author: Dirgita -Date: Mon Aug 13 05:51:36 2012 +0700 - - Updated Indonesian translation - - po/id.po | 606 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 352 insertions(+), 254 deletions(-) - -commit e6470787023be114bcfe9fa923e561bd40634161 -Author: Felix Riemann -Date: Sun Aug 12 16:35:46 2012 +0200 - - EogApplication: Make most members private - - This allows plugin usage without installing toolbar editor headers. - - src/Makefile.am | 1 + - src/eog-application-internal.h | 68 +++++++++++++++++++++++++ - src/eog-application.c | 109 +++++++++++++++++++++++------------------ - src/eog-application.h | 25 ++-------- - src/eog-window.c | 9 ++-- - src/main.c | 3 +- - 6 files changed, 140 insertions(+), 75 deletions(-) - -commit cdfe77e18b7510e51546b869343f3feda4c541bf -Author: Felix Riemann -Date: Sun Aug 12 15:53:18 2012 +0200 - - Add new plugin hook for per-application plugins - - These will be loaded on application initialization and disabled - once the application is disposed. - - src/Makefile.am | 2 + - src/eog-application-activatable.c | 85 +++++++++++++++++++++++++++++++++++++++ - src/eog-application-activatable.h | 69 +++++++++++++++++++++++++++++++ - src/eog-application.c | 33 +++++++++++++++ - src/eog-application.h | 4 ++ - 5 files changed, 193 insertions(+) - -commit 0048b07fadb3426da2a09a0e0ff1b2f95153518b -Author: Chao-Hsiung Liao -Date: Sun Aug 12 22:49:42 2012 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 311 +++++++++++++++++++++++++++++++----------------------------- - po/zh_TW.po | 311 +++++++++++++++++++++++++++++++----------------------------- - 2 files changed, 320 insertions(+), 302 deletions(-) - -commit 9b65ec0cf520a9a592255c61454fcbe82c2cc205 -Author: Tiffany Antopolski -Date: Sat Aug 11 14:25:22 2012 -0400 - - help: update xmls:if to 1.0 - - help/C/plugins.page | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 3a647edfaca44f72360f8db71b085240b1e4f357 -Author: Tiffany Antopolski -Date: Sat Aug 11 12:12:21 2012 -0400 - - help: Fix link to l10n.gnome.org in translate.pgae - - help/C/translate.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ce3c4f82e5c327614180d41ff7f550a77c55701e -Author: Tiffany Antopolski -Date: Sat Aug 11 12:02:16 2012 -0400 - - Add new help files to help/Makefile.am - - help/Makefile.am | 2 ++ - 1 file changed, 2 insertions(+) - -commit fabbea3dc5995a2815cec29d86210799c36ff67c -Author: Tiffany Antopolski -Date: Sat Aug 11 12:01:41 2012 -0400 - - Bring back plugin-postr.page - - help/C/plugin-postr.page | 57 ++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 57 insertions(+) - -commit e06fe41683b075b9095ae6d536cdbcc0262acfd6 -Author: Fabiana Simões -Date: Sat Aug 11 09:32:46 2012 -0300 - - Overall revision of user documentation, added pages for the picasa and fullscreen background plugins - - help/C/plugin-fullscreen-background.page | 30 ++++++++++++++++++++++++++++++ - help/C/plugin-picasa.page | 32 ++++++++++++++++++++++++++++++++ - 2 files changed, 62 insertions(+) - -commit 6bb1cadd2f9ed4357fc1c272f7519b1ffa062276 -Author: Fabiana Simões -Date: Sat Aug 11 09:32:02 2012 -0300 - - Overall revision of user documentation, added pages for the picasa and fullscreen background plugins - - help/C/commandline.page | 23 +++++++++-------- - help/C/copy-paste.page | 6 ++++- - help/C/default.page | 4 +++ - help/C/edit.page | 8 +++--- - help/C/format-change.page | 12 ++++----- - help/C/formats-save.page | 6 ++++- - help/C/plugin-exif-digital.page | 15 +++++++++-- - help/C/plugin-postr.page | 57 ----------------------------------------- - help/C/plugins.page | 31 ++++++++++++++-------- - 9 files changed, 71 insertions(+), 91 deletions(-) - -commit 8321658cf196bde4d86df01a47967b8262131402 -Author: Yaron Shahrabani -Date: Fri Aug 10 15:37:35 2012 +0300 - - Updated Hebrew translation. - - po/he.po | 819 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 417 insertions(+), 402 deletions(-) - -commit 79de1ccdb81e35f0a31175e898b5b6429b412d2e -Author: Muhammet Kara -Date: Thu Aug 9 17:08:32 2012 +0300 - - [l10n]Updated Turkish translation - - po/tr.po | 356 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 185 insertions(+), 171 deletions(-) - -commit b8a4ccab22b1775c9f54e750d8bab5d55b19b553 -Author: Khaled Hosny -Date: Wed Aug 8 08:56:01 2012 +0200 - - Updated Arabic translation - - po/ar.po | 302 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 155 insertions(+), 147 deletions(-) - -commit db5aaf2142783069d1c1f5e79b530472395654d9 -Author: Felix Riemann -Date: Mon Aug 6 22:27:08 2012 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0f6080befec18d51e1568bbbe283df45c68a8a57 -Author: Felix Riemann -Date: Mon Aug 6 22:19:46 2012 +0200 - - Prepare for release 3.5.4 - - NEWS | 30 ++++++++++++++++++++++++++++++ - 1 file changed, 30 insertions(+) - -commit cc6a99635632be1150dcb0e5a938d23e03d83535 -Author: Tom Tryfonidis -Date: Mon Aug 6 17:53:39 2012 +0300 - - Updated Greek translation - - po/el.po | 992 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 457 insertions(+), 535 deletions(-) - -commit 99eeb141d9bc7a1bdacadf6d276c20c4b71f742c -Author: Мирослав Николић -Date: Sat Aug 4 05:03:32 2012 +0200 - - Updated Serbian translation - - po/sr.po | 335 +++++++++++++++++++++++++++++---------------------------- - po/sr@latin.po | 335 +++++++++++++++++++++++++++++---------------------------- - 2 files changed, 344 insertions(+), 326 deletions(-) - -commit 1462d39c08f7af4939f11f0c6105ee0318258c3f -Author: Nilamdyuti Goswami -Date: Fri Aug 3 14:36:54 2012 +0530 - - Assamese translation updated - - po/as.po | 300 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 155 insertions(+), 145 deletions(-) - -commit 3bc735cfa0d6770462d356be582b89f9cde01eda -Author: Jiro Matsuzawa -Date: Thu Aug 2 12:06:36 2012 +0900 - - [l10n] Update Japanese translation - - Modify the About label - - po/ja.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 1b2df80d5750ac70406770640a95dcea33aec8aa -Author: Jiro Matsuzawa -Date: Tue Jul 31 23:13:04 2012 +0900 - - [l10n] Update Japanese translation - - po/ja.po | 316 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 162 insertions(+), 154 deletions(-) - -commit eb16effdd3857024dc152a2b60b4ac62a0ebea40 -Author: Sweta Kothari -Date: Mon Jul 30 11:31:41 2012 +0530 - - Updated gujarati file - - po/gu.po | 387 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 201 insertions(+), 186 deletions(-) - -commit 2025ddbdb924d2bf78a1c8bffbdc0db54c357fd3 -Author: Fran Diéguez -Date: Mon Jul 30 02:53:09 2012 +0200 - - Updated Galician translations - - po/gl.po | 328 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 168 insertions(+), 160 deletions(-) - -commit f12331636af7a25b4d0e2d405395706627e1e546 -Author: Praveen Illa -Date: Sun Jul 29 23:46:41 2012 +0530 - - Updated Telugu Translation - - po/te.po | 413 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 211 insertions(+), 202 deletions(-) - -commit c82789bc9e10a6f950b9f02e539b226ccd7746c1 -Author: Matej Urbančič -Date: Sun Jul 29 14:35:07 2012 +0200 - - Updated Slovenian translation - - po/sl.po | 349 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 182 insertions(+), 167 deletions(-) - -commit c7c8883ce4f4ccefe2078ade9b4dbb1e53f643f4 -Author: Daniel Mustieles -Date: Fri Jul 27 11:32:17 2012 +0200 - - Updated Spanish translation - - po/es.po | 330 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 170 insertions(+), 160 deletions(-) - -commit 2f0e379327c57660478a7f2556198b929b35e184 -Author: Kjartan Maraas -Date: Thu Jul 26 10:31:33 2012 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 316 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 162 insertions(+), 154 deletions(-) - -commit ab2690d6dfb3a00ced662328b78bfbbfd7895a4c -Author: Piotr Drąg -Date: Wed Jul 25 22:46:29 2012 +0200 - - Updated POTFILES.in - - po/POTFILES.in | 1 + - 1 file changed, 1 insertion(+) - -commit 232292e570192ff41a6509f381953803cf39e188 -Author: Felix Riemann -Date: Thu Jun 7 15:47:30 2012 +0200 - - Provide an app menu - - Heavily based on nautilus' app menu implementation. - - https://bugzilla.gnome.org/show_bug.cgi?id=674938 - - data/Makefile.am | 1 + - data/eog-app-menu.xml | 47 +++++++++++++ - src/eog-application.c | 184 ++++++++++++++++++++++++++++++++++++++++++++++++++ - src/eog-application.h | 2 + - src/eog-window.c | 144 +++++++++++++++++++++------------------ - src/eog-window.h | 6 ++ - 6 files changed, 318 insertions(+), 66 deletions(-) - -commit 3015f99d84eb1bcd267ef34e7e341a47a740bedd -Author: Felix Riemann -Date: Wed Jul 25 20:47:54 2012 +0200 - - EogWindow: Fix indentation - - src/eog-window.c | 54 +++++++++++++++++++++++++++--------------------------- - 1 file changed, 27 insertions(+), 27 deletions(-) - -commit 332912fd4deadac51c17043392025aecd8b10b2b -Author: Felix Riemann -Date: Wed Jul 25 20:44:05 2012 +0200 - - EogWindow: React to changes of the *bar GSettings keys again - - src/eog-window.c | 26 +++++++++++++++++++++----- - 1 file changed, 21 insertions(+), 5 deletions(-) - -commit 2232759af2c7f04596ea2e150f8d373a708cc1c3 -Author: Tobias Endrigkeit -Date: Mon Jul 23 22:56:33 2012 +0200 - - Updated German translation - - po/de.po | 954 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 485 insertions(+), 469 deletions(-) - -commit e2231eb80cd841a47b496d13162b04a1c6ea8891 -Author: Мирослав Николић -Date: Mon Jul 23 00:22:23 2012 +0200 - - Updated Serbian translation - - po/sr.po | 562 ++++++++++++++++++++------------------------------------- - po/sr@latin.po | 562 ++++++++++++++++++++------------------------------------- - 2 files changed, 384 insertions(+), 740 deletions(-) - -commit 259138cf53dfd00824236fd59a87006b109bddc4 -Author: Dimitris Spingos -Date: Fri Jul 20 23:35:27 2012 +0300 - - Added Greek snapshots - - help/el/figures/eog-toolbar-editor.png | Bin 0 -> 17610 bytes - help/el/figures/eog_start_window.png | Bin 16611 -> 0 bytes - help/el/figures/eog_toolbar_editor_window.png | Bin 28997 -> 0 bytes - help/el/figures/image-view-prefs.png | Bin 0 -> 18095 bytes - help/el/figures/multiple-convert.png | Bin 0 -> 19778 bytes - help/el/figures/multiple-rename-count.png | Bin 0 -> 19607 bytes - help/el/figures/plugins-all.png | Bin 0 -> 40682 bytes - help/el/figures/prefs-plugins-date.png | Bin 0 -> 57455 bytes - help/el/figures/prefs-plugins-fullscreen.png | Bin 0 -> 58628 bytes - help/el/figures/prefs-plugins.png | Bin 0 -> 56118 bytes - help/el/figures/slideshow-prefs.png | Bin 0 -> 45195 bytes - 11 files changed, 0 insertions(+), 0 deletions(-) - -commit 5707f55ac258ee5941f6a1dadb8e13f1912d7d53 -Author: Dimitris Spingos -Date: Fri Jul 20 17:58:55 2012 +0300 - - Updated Greek translation-help - - help/el/el.po | 4920 +++++++++++++++++++++++++++++++++++++++++++++++---------- - 1 file changed, 4061 insertions(+), 859 deletions(-) - -commit 6041690dd948b5ecc17ef157b9abab725866c45f -Author: Andika Triwidada -Date: Thu Jul 19 11:34:26 2012 +0700 - - Updated Indonesian translation - - po/id.po | 340 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 169 insertions(+), 171 deletions(-) - -commit 9127374cd0f2e6484f74b7cded3b2005125e9f78 -Author: Chao-Hsiung Liao -Date: Wed Jul 18 19:26:45 2012 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 990 ++++++++++++++++++++++++++++---------------------------- - po/zh_TW.po | 1030 ++++++++++++++++++++++++++++++----------------------------- - 2 files changed, 1014 insertions(+), 1006 deletions(-) - -commit 5d2dddbc58b85210604fb713c43811041b29c147 -Author: Felix Riemann -Date: Tue Jul 17 19:35:30 2012 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d4eaf4304fed98a2cfa7a2832f44f7b71bc9314a -Author: Felix Riemann -Date: Tue Jul 17 19:29:20 2012 +0200 - - Prepare for release 3.5.3 - - NEWS | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - -commit 965dbc0a98037efec5cb754a6f03a0e4d14c4b57 -Author: Ihar Hrachyshka -Date: Sun Jul 15 14:45:04 2012 +0300 - - Updated Belarusian translation. - - po/be.po | 292 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 147 insertions(+), 145 deletions(-) - -commit 46fb71380a565e43b2e216d906f8d77a336b9333 -Author: Felix Riemann -Date: Fri Jul 6 23:52:41 2012 +0200 - - EogCloseConfirmationDialog: Fix size request for the image list - - Change the size request of the encasing ScrolledWindow instead of the - TreeView itself. Otherwise the list would hardly show one row. - - https://bugzilla.gnome.org/show_bug.cgi?id=679505 - - src/eog-close-confirmation-dialog.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c88190f9849963c3a09f901ccd37c60494f35ba8 -Author: Alexander Shopov -Date: Wed Jul 4 07:22:20 2012 +0300 - - Updated Bulgarian translation - - po/bg.po | 286 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 144 insertions(+), 142 deletions(-) - -commit efe785246025784e0f790fdf8584189f55dfea27 -Author: Nguyễn Thái Ngọc Duy -Date: Sat Jun 30 20:17:47 2012 +0700 - - Updated Vietnamese translation - - po/vi.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit f07a06ee104385d7cc4fa1d0a295ef38abc92277 -Author: Nguyễn Thái Ngọc Duy -Date: Sat Jun 30 20:16:58 2012 +0700 - - po/vi: import from Damned Lies - - po/vi.po | 296 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 150 insertions(+), 146 deletions(-) - -commit b6b435892d55e22bbbafd63ac3752aff590f98a6 -Author: Felix Riemann -Date: Mon Jun 25 21:48:10 2012 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 38e32f933c2a4f8630924e39ad75f65495148f72 -Author: Felix Riemann -Date: Mon Jun 25 21:32:21 2012 +0200 - - Prepare for release 3.5.2 - - NEWS | 31 +++++++++++++++++++++++++++++++ - 1 file changed, 31 insertions(+) - -commit fb4f7ce3e38b695e6693937462acaad6172a9251 -Author: Felix Riemann -Date: Mon Jun 25 21:40:05 2012 +0200 - - EogStatusBar: Reduce bottom margin of embedded progress bar - - This would otherwise cause unnecessary redraws with gtk+ and - gnome-themes-standard due to the image area resizing. - - src/eog-statusbar.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit df5b2b69fe70ef48882210c9948f9eaca19415c7 -Author: Felix Riemann -Date: Thu Jun 7 13:22:20 2012 +0200 - - Make EogWindow a GtkApplicationWindow - - This is necessary to support application menus. - - src/eog-window.c | 4 +++- - src/eog-window.h | 4 ++-- - 2 files changed, 5 insertions(+), 3 deletions(-) - -commit 888b5ed2f6d0fa89d52fad68ddcf14fbca134932 -Author: Felix Riemann -Date: Sat Jun 23 17:12:54 2012 +0200 - - EogThumbView: Set icon view columns to the real number of images - - GtkIconView's layout code was redone in gtk+-3.4.3 and 3.4.4 - breaking EogThumbView which would scale the thumbnails so small that - the thumbview would not be shown itself in single row mode. - This should work with gtk+-3.4.2 and earlier as well. - - https://bugzilla.gnome.org/show_bug.cgi?id=677168 - - src/eog-thumb-nav.c | 10 ++++-- - src/eog-thumb-view.c | 91 +++++++++++++++++++++++++++++++++++++++++++++++++++- - 2 files changed, 98 insertions(+), 3 deletions(-) - -commit 926c759772a9060ae72cedfb01468f4bd1a0246f -Author: Felix Riemann -Date: Sat Jun 16 19:28:20 2012 +0200 - - EogThumbView: Implement GtkOrientable - - src/eog-thumb-view.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 56 insertions(+), 1 deletion(-) - -commit 9015c3d76da2d7e636567429f174ee3faccaf480 -Author: Takayuki KUSANO -Date: Sun Jun 24 00:33:36 2012 +0900 - - [l10n] Update Japanese translation - - po/ja.po | 514 +++++++++++++++++++++++++-------------------------------------- - 1 file changed, 205 insertions(+), 309 deletions(-) - -commit d4adc0f97c0e58ec9bce461e9e52c399b7e0e07c -Author: Andrej Žnidaršič -Date: Fri Jun 22 09:31:22 2012 +0200 - - Updated Slovenian translation - - po/sl.po | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit c9ca0669bb638d754cc93d5818be7ca261842521 -Author: Aleksej Kabanov -Date: Sun Jun 17 20:56:38 2012 +0400 - - Updated Russian translation - - po/ru.po | 583 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 341 insertions(+), 242 deletions(-) - -commit 4761ae0cf0411fb539b191efa61c4cdfabc5992e -Author: Nilamdyuti Goswami -Date: Wed Jun 13 21:14:37 2012 +0530 - - Assamese translation reviewed - - po/as.po | 417 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 205 insertions(+), 212 deletions(-) - -commit 5dbf8a8b2b94ebaa42b45e5e2b763ebae1a31342 -Author: Khaled Hosny -Date: Tue Jun 12 17:54:41 2012 +0200 - - Updated Arabic translation - - po/ar.po | 283 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 146 insertions(+), 137 deletions(-) - -commit b52d2c1c6569d4c9106ebb4dc7218c9e1981baa9 -Author: Felix Riemann -Date: Sun Jun 10 15:34:26 2012 +0200 - - EogWindow: Make sure the window is realized after loading an image - - Otherwise it could happen that no window is shown if the fist image - doesn't correctly emit its size-prepared signal correctly. - - https://bugzilla.gnome.org/show_bug.cgi?id=669830 - - src/eog-window.c | 11 +++++++++++ - 1 file changed, 11 insertions(+) - -commit 3fb558e1861d3d75bca23946fcf3f62c80daeeec -Author: Felix Riemann -Date: Fri Jun 8 18:40:20 2012 +0200 - - EogScrollView: Clip SVGs to the visible image area - - This avoids showing image data present in those images but outside - of the defined image boundaries. That could make the UI look like - it is misbehaving (e.g. not showing scrollbars). - - https://bugzilla.gnome.org/show_bug.cgi?id=676486 - - src/eog-scroll-view.c | 9 +++++++-- - 1 file changed, 7 insertions(+), 2 deletions(-) - -commit aebffb6f59844294ef49e94d784071f24900bcbb -Author: Felix Riemann -Date: Thu Jun 7 13:33:26 2012 +0200 - - EogWindow: Make check for initialized a check for not initializing - - This allows reusing existing empty windows which got broken in - in the fix for bug 677200 (commit 92c37ff). - - src/eog-application.c | 3 ++- - src/eog-window.c | 4 ++-- - src/eog-window.h | 2 +- - 3 files changed, 5 insertions(+), 4 deletions(-) - -commit 92c37ff6b34a2866ba2d03be7f6e1e973c707419 -Author: Felix Riemann -Date: Mon Jun 4 21:55:29 2012 +0200 - - Make sure to only reuse an empty window if it is done initializing - - This avoids a race condition when opening images through multiple instances. - The second instance could then override the already loading (hidden) - window's image resulting in only one image window showing. - - https://bugzilla.gnome.org/show_bug.cgi?id=677200 - - src/eog-application.c | 3 ++- - src/eog-window.c | 8 ++++++++ - src/eog-window.h | 1 + - 3 files changed, 11 insertions(+), 1 deletion(-) - -commit 11f05ec911b4208faa8f00ecd9f4830ca39fcb25 -Author: Tom Gall -Date: Sun Jun 3 14:26:31 2012 +0200 - - Fix saving transformed JPEG images that don't transform perfectly - - This could lead to a crash or break saving of these files with a - message about the image exceeding the maximum image dimensions for saving. - - https://bugzilla.gnome.org/show_bug.cgi?id=675569 - - src/eog-image-jpeg.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit f8788a73cef17db329a59a08d628c52f2fb868d4 -Author: Daniel Mustieles -Date: Thu May 31 13:14:20 2012 +0200 - - Updated Spanish translation - - po/es.po | 8 +++----- - 1 file changed, 3 insertions(+), 5 deletions(-) - -commit 05aa696fbad1e9e60acf2cc29136b4215054174f -Author: Bruno Brouard -Date: Wed May 23 23:21:31 2012 +0200 - - Updated French translation - - po/fr.po | 303 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 152 insertions(+), 151 deletions(-) - -commit b7c68b1ffe2ebcc81d6daa947d8ee94ad4e7e2c5 -Author: Antoine Jacoutot -Date: Mon May 21 08:08:18 2012 +0200 - - build: OpenBSD needs _XOPEN_SOURCE_EXTENDED for strptime(3) - - strptime(3) was introduced in XPG4. On OpenBSD, just defining - _XOPEN_SOURCE gets you the older XPG3 wich doesn't include strptime(3), - so we need to define _XOPEN_SOURCE_EXTENDED to get XPG4v2. - - src/eog-exif-util.c | 1 + - 1 file changed, 1 insertion(+) - -commit 3c11be7ab2560450e4ba4704b6b196f374f49f49 -Author: Christian Kirbach -Date: Wed May 23 00:03:47 2012 +0200 - - Updated German help translation - - help/de/de.po | 302 +++++++++++++++++++++++++++++++++++++++++++++++++++------- - 1 file changed, 266 insertions(+), 36 deletions(-) - -commit ea8c106712e5c37fb7dd4510c3fed84b22ce911e -Author: Rūdolfs Mazurs -Date: Fri May 18 17:55:14 2012 +0300 - - Updated Latvian translation - - po/lv.po | 472 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 245 insertions(+), 227 deletions(-) - -commit 710597f9f25cab797793dc1e6689e60474476d97 -Author: Tom Tryfonidis -Date: Wed May 2 13:03:15 2012 +0300 - - Updated Greek translation - - po/el.po | 846 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 430 insertions(+), 416 deletions(-) - -commit 232a5dd4b435af5173d8003621c3f0bed96dfc74 -Author: Felix Riemann -Date: Mon Apr 30 23:34:40 2012 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit da2442ab5bd8767b534c4710009abed0dc3ca9c3 -Author: Felix Riemann -Date: Mon Apr 30 23:27:56 2012 +0200 - - Prepare for release 3.5.1 - - NEWS | 38 ++++++++++++++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 39 insertions(+), 1 deletion(-) - -commit 5aebb88a206f1d6dfab87fbe9a63c6cc54bf37e9 -Author: Javier Sánchez -Date: Sun Apr 29 11:41:06 2012 +0200 - - Printing paper orientation should default based on image dimensions - - Now, the default paper orientation in print settings is based on image - dimensions. - - https://bugzilla.gnome.org/show_bug.cgi?id=531898 - - src/eog-print.c | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - -commit a0a7bdacdb33352fb2c79f756696dd696ce1f358 -Author: Matej Urbančič -Date: Sat Apr 21 13:01:14 2012 +0200 - - Updated Slovenian translation - - po/sl.po | 324 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 165 insertions(+), 159 deletions(-) - -commit 38e8c3a7b1205726474e39f2ff00a3258ec585f4 -Author: Fran Diéguez -Date: Thu Apr 19 19:26:30 2012 +0200 - - Updated Galician translations - - po/gl.po | 264 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 134 insertions(+), 130 deletions(-) - -commit 874920955b1ed47fc5d808f4538e49a7c9e27563 -Author: Kjartan Maraas -Date: Wed Apr 18 20:04:38 2012 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 40 ++++++++++++++++++++-------------------- - 1 file changed, 20 insertions(+), 20 deletions(-) - -commit 0d60cd10abe7241a435feb00e82e91f1f70cd067 -Author: Felix Riemann -Date: Mon Apr 16 23:39:40 2012 +0200 - - Post-branch version bump - - A little bit late, but make it clear that this is a development branch. - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 8c35097d0c85b2df2e679d078eafe9e40d92e7e4 -Author: Bruno Brouard -Date: Fri Apr 13 21:36:25 2012 +0200 - - Updated French doc translation - - help/fr/fr.po | 301 ++++++++++++++++++++++++++++++++++++++++++++++++++-------- - 1 file changed, 263 insertions(+), 38 deletions(-) - -commit 257fe2f1d9b3ca582da74e9a843314f8cd538740 -Author: Yaron Shahrabani -Date: Fri Apr 13 01:00:32 2012 +0300 - - Updated Hebrew translation. - - po/he.po | 317 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 161 insertions(+), 156 deletions(-) - -commit 7029dfe154cf8d1ce4df8fd6f3157b344e0ad9b7 -Author: Felix Riemann -Date: Wed Apr 11 21:15:39 2012 +0200 - - Avoid recompressing JPEGs as PNG when printing - - Use cairo's feature to simply attach the source file data to - the printing surface. This reduces the file size of the resulting - PDF file pretty much to the source file size. - - https://bugzilla.gnome.org/show_bug.cgi?id=394260 - - src/eog-image.c | 18 +++++++- - src/eog-image.h | 6 ++- - src/eog-print.c | 138 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 160 insertions(+), 2 deletions(-) - -commit d6b9b7d94db142d84d1074ceebe4a40411a60765 -Author: Carles Ferrando -Date: Tue Apr 10 23:50:22 2012 +0200 - - [l10n]Updated Catalan (Valencian) translation - - po/ca@valencia.po | 43 ++++++++++++++++++++++++------------------- - 1 file changed, 24 insertions(+), 19 deletions(-) - -commit a365dfb744c412dc4dbefd206a6ce4e4995aab59 -Author: Jordi Serratosa -Date: Tue Apr 10 23:50:04 2012 +0200 - - [l10n] Fixes on Catalan translation - - po/ca.po | 32 +++++++++++++++++--------------- - 1 file changed, 17 insertions(+), 15 deletions(-) - -commit 99deea8dc96bc8d50453b94fcd7b82b9faa0cb21 -Author: Fran Diéguez -Date: Tue Apr 10 23:30:08 2012 +0200 - - Updated Galician translations for doc - - Signed-off-by: Fran Diéguez - - help/gl/gl.po | 349 ++++++++++++++++++++++++++++++++++++++++++++++++++-------- - 1 file changed, 301 insertions(+), 48 deletions(-) - -commit 7686a7b0608d10005a21493672dd7039adfc77d8 -Author: Gabor Kelemen -Date: Tue Apr 10 22:59:20 2012 +0200 - - Updated Hungarian translation - - help/hu/hu.po | 395 +++++++++++++++++++++++++++++++++++++++++++--------------- - 1 file changed, 295 insertions(+), 100 deletions(-) - -commit 87fe5b97653285973c88b0efb806f18ca648291a -Author: Andrej Žnidaršič -Date: Mon Apr 9 12:15:24 2012 +0200 - - Updated Slovenian translation - - help/sl/sl.po | 175 +++++++++++++++++++++++++++++++++++++++++++++++++++------- - 1 file changed, 155 insertions(+), 20 deletions(-) - -commit 6402b286dda779f280d941be56c2e17f2baa127d -Author: Praveen Illa -Date: Mon Apr 9 01:24:17 2012 +0530 - - Updated Telugu Translation - - po/te.po | 34 +++++++++++++++++++--------------- - 1 file changed, 19 insertions(+), 15 deletions(-) - -commit 1e138be45f5c60ec92fe21e3749139f540cd1acd -Author: Daniel Mustieles -Date: Sun Apr 8 13:22:22 2012 +0200 - - Updated Spanish translation - - po/es.po | 296 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 151 insertions(+), 145 deletions(-) - -commit a8c7091fae2075adf0a8d66017736c52832d1126 -Author: Felix Riemann -Date: Fri Apr 6 19:22:03 2012 +0200 - - Replace slideshow timeout spinbutton with a scale - - This should make it easier for translators to handle this UI part - as the time unit is decoupled from the description. - - https://bugzilla.gnome.org/show_bug.cgi?id=658127 - - data/eog-preferences-dialog.ui | 43 +++++++++++++++++++----------------------- - src/eog-preferences-dialog.c | 22 ++++++++++++++++++--- - 2 files changed, 38 insertions(+), 27 deletions(-) - -commit 0815e9eb2232fc8734622d2254d64774aadecd62 -Author: Felix Riemann -Date: Fri Apr 6 17:49:43 2012 +0200 - - fullscreen: Check if clicks originated from over the image - - This avoids going fullscreen by clicking the scrollbars. - - https://bugzilla.gnome.org/show_bug.cgi?id=579595 - - plugins/fullscreen/eog-fullscreen-plugin.c | 8 +++++++- - 1 file changed, 7 insertions(+), 1 deletion(-) - -commit 5fcbe0c8d1048c233de70b75724a6eb427c2d55c -Author: Felix Riemann -Date: Fri Apr 6 17:45:15 2012 +0200 - - EogScrollView: Add function to check if an event's source if over the image - - Useful to check if click events are over the image itself. - - doc/reference/eog-sections.txt | 1 + - src/eog-scroll-view.c | 106 +++++++++++++++++++++++++++++++++++------ - src/eog-scroll-view.h | 3 ++ - 3 files changed, 95 insertions(+), 15 deletions(-) - -commit 25050d3b5cfcb901c5245a967b1435b235cc8bbe -Author: Daniel Mustieles -Date: Sun Apr 1 19:36:10 2012 +0200 - - Updated Spanish translation - - help/es/es.po | 6734 +++++++++++++++++++++++++++++---------------------------- - 1 file changed, 3481 insertions(+), 3253 deletions(-) - -commit 791607cfc9c746dd1d8c52497bffd24627bdda42 -Author: Khaled Hosny -Date: Sun Apr 1 17:07:50 2012 +0200 - - Review Arabic translation - - po/ar.po | 69 +++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 42 insertions(+), 27 deletions(-) - -commit 719dfa22cebaa1d1f8d73b76497fe3d58315b387 -Author: Andika Triwidada -Date: Sat Mar 31 23:46:01 2012 +0700 - - [l10n] Updated Indonesian translation - - po/id.po | 1176 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 615 insertions(+), 561 deletions(-) - -commit c6746fff19d5430fbe94bda73215f9b5723cb512 -Author: Tiffany Antopolski -Date: Sat Mar 31 12:08:46 2012 -0400 - - help docs: added get-involved pages and license info. - - Also updated the makefile and added copyright to index.page - - help/C/develop.page | 27 ++++++++++++++++++++++ - help/C/documentation.page | 30 ++++++++++++++++++++++++ - help/C/index.page | 3 ++- - help/C/license.page | 59 +++++++++++++++++++++++++++++++++++++++++++++++ - help/C/translate.page | 39 +++++++++++++++++++++++++++++++ - help/Makefile.am | 4 ++++ - 6 files changed, 161 insertions(+), 1 deletion(-) - -commit 415c249e30e0da9580740ae4f0e66d3cb5eb225f -Author: Mario Blättermann -Date: Tue Mar 27 23:31:10 2012 +0200 - - [l10n] Updated German doc translation - - help/de/de.po | 675 ++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 354 insertions(+), 321 deletions(-) - -commit 9457577bf9b019a58a40938b7e6ca0c75356a41d -Author: Carles Ferrando -Date: Tue Mar 27 22:30:10 2012 +0200 - - [l10n]Updated Catalan (Valencian) translation - - po/ca@valencia.po | 1270 +++++++++++++++++++++++++++-------------------------- - 1 file changed, 655 insertions(+), 615 deletions(-) - -commit 08dbe0ca30f42146aff2849770264819175489d6 -Author: Yasumichi Akahoshi -Date: Tue Mar 27 23:50:23 2012 +0900 - - [l10n] Update Japanese translation - - help/ja/ja.po | 103 +++++++++++++++++++++++++++++++++++++++++----------------- - 1 file changed, 74 insertions(+), 29 deletions(-) - -commit dc8dfef361e4c8797e3ac0a8aee075fb264eef54 -Author: Chao-Hsiung Liao -Date: Tue Mar 27 12:00:56 2012 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 707 ++++++++++++++++++++++++++++++++---------------------------- - po/zh_TW.po | 701 +++++++++++++++++++++++++++++++---------------------------- - 2 files changed, 747 insertions(+), 661 deletions(-) - -commit b2ece774230591fcadfdbb06097e0b71ea42e404 -Author: Felix Riemann -Date: Mon Mar 26 22:24:39 2012 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 908c654abf8a0b2226672ec26ced3ec142ccef2f -Author: Felix Riemann -Date: Mon Mar 26 22:16:57 2012 +0200 - - Prepare for release 3.4.0 - - NEWS | 17 +++++++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 19 insertions(+), 2 deletions(-) - -commit d16d39435a0766cb28f609b91b09869680ab0093 -Author: Andrej Žnidaršič -Date: Mon Mar 26 14:07:00 2012 +0200 - - Updated Slovenian translation - - help/sl/sl.po | 63 ++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 39 insertions(+), 24 deletions(-) - -commit 0e3b8c4fc0bb86df0e5e1dc9694d338eef76078b -Author: Bruno Brouard -Date: Mon Mar 26 12:29:24 2012 +0200 - - Updated French doc translation - - help/fr/fr.po | 57 +++++++++++++++++++++++++++------------------------------ - 1 file changed, 27 insertions(+), 30 deletions(-) - -commit 193b2cdfbfd137bcbec86a7085060aecd41b86f1 -Author: Sasi Bhushan -Date: Sun Mar 25 17:04:45 2012 +0530 - - Added Telugu help Translations - - help/Makefile.am | 2 +- - help/te/te.po | 2080 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 2081 insertions(+), 1 deletion(-) - -commit 0af23f4a7a67a3c09924f2036bd4019c008e5a24 -Author: Jiro Matsuzawa -Date: Sun Mar 25 14:31:48 2012 +0900 - - [l10n] Update Japanese translation - - po/ja.po | 288 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 147 insertions(+), 141 deletions(-) - -commit 0aded71049366f18a611aeccbb4be19412d66d3d -Author: Praveen Illa -Date: Fri Mar 23 15:30:05 2012 +0530 - - Updated Telugu Translation - - po/te.po | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -commit f505a34fb12c920cf0452bcd84b29657808449ad -Author: Praveen Illa -Date: Fri Mar 23 15:26:51 2012 +0530 - - Updated Telugu Translation - - po/te.po | 492 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 246 insertions(+), 246 deletions(-) - -commit a152672b6d7a83f35505d438d5a7bb362e760cf0 -Author: Praveen Arimbrathodiyil -Date: Thu Mar 22 20:51:45 2012 +0530 - - Malayalam translation updated - - po/ml.po | 1485 +++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 792 insertions(+), 693 deletions(-) - -commit e5c27629fdfb624ded860d5e7a2af9fa311887d4 -Author: Kenneth Nielsen -Date: Thu Mar 22 15:41:40 2012 +0100 - - Updated Danish translation - - po/da.po | 879 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 442 insertions(+), 437 deletions(-) - -commit 82b0f16b391a70d7825aa8500a7d2df0af6bffca -Author: Olav Vitters -Date: Wed Mar 21 22:08:38 2012 +0100 - - fix typo; double a - - po/te.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b7453f99aa129334ced44b4b7059da3645c779e1 -Author: Olav Vitters -Date: Wed Mar 21 22:05:48 2012 +0100 - - fix keywords in te.po - - po/te.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 568722ad7a9917a2eb9c2b44ceeb556ce5fe6917 -Author: Krishnababu Krothapalli -Date: Tue Mar 20 21:37:05 2012 +0530 - - Translations Updated with FUEL - - po/te.po | 214 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 107 insertions(+), 107 deletions(-) - -commit c7b8ba2fe93865153edbb1b1117ddb3b50c4c3d5 -Author: Aurimas Černius -Date: Mon Mar 19 23:27:28 2012 +0200 - - Updated Lithuanian translation - - po/lt.po | 1300 +++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 602 insertions(+), 698 deletions(-) - -commit 4324167b3ef2600a91cc94fcbbde1c5b8da5465f -Author: Felix Riemann -Date: Mon Mar 19 22:04:02 2012 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0288806234332b4e384cb872983f3a5e8bd5eeb3 -Author: Felix Riemann -Date: Mon Mar 19 21:56:44 2012 +0100 - - Prepare for release 3.3.92 - - NEWS | 42 ++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 42 insertions(+) - -commit 706797b92423a7b3a138985060d2fcecf1ae61bd -Author: Felix Riemann -Date: Sun Mar 18 18:59:35 2012 +0100 - - Revert "Do not show the titlebar when eog is maximized." - - This reverts commit c93aa0b94ba6142c78ea5025a56a0f70c6fc0739. - As the menubar comes pretty close to the top of the screen, - there is apperently the possibility to accidentially trigger - gnome-shell's activities menu. Revisit this for the next development - cycle when all the dependencies are stable enough. - - https://bugzilla.gnome.org/show_bug.cgi?id=671643 - - src/eog-window.c | 2 -- - 1 file changed, 2 deletions(-) - -commit b7c5c81df14c1cfe1644228758b1f894cf1253b1 -Author: Felix Riemann -Date: Sun Mar 18 18:43:01 2012 +0100 - - Add gtk version check around changes of commit 22618a75 - - We use symbols that are not present in earlier GTK+ versions. - - src/eog-thumb-nav.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit 22618a75bcf2a754f5fbe48b2d49c27b5e66ecd5 -Author: Felix Riemann -Date: Sun Mar 18 18:28:57 2012 +0100 - - EogThumbNav: Fix mousewheel scrolling with gtk-3.3.18 and xserver-1.12 - - Handle incoming smooth scroll events that are oviously caused by - the scrollwheel just like legacy scroll events. - - https://bugzilla.gnome.org/show_bug.cgi?id=672312 - - src/eog-thumb-nav.c | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - -commit cd5996d8f70aa1982f1dba54d4acea6dded05c48 -Author: Gianvito Cavasoli -Date: Sun Mar 18 18:31:31 2012 +0100 - - [l10n] Updated Italian translation - - po/it.po | 720 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 383 insertions(+), 337 deletions(-) - -commit f05db86aa7cb23cb8c5776011e7463ab03589eff -Author: Abderrahim Kitouni -Date: Sun Mar 18 15:58:35 2012 +0100 - - Updated Arabic translation - - po/ar.po | 1246 +++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 670 insertions(+), 576 deletions(-) - -commit 32a85fb24ea22a3e044c6738e18381561167797c -Author: Duarte Loreto -Date: Sun Mar 18 00:00:34 2012 +0000 - - Updated Portuguese translation - - po/pt.po | 1265 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 652 insertions(+), 613 deletions(-) - -commit 5d9278bede301b211f61b306bfc31003fc2dcfb6 -Author: Viesturs Ružāns -Date: Sat Mar 17 12:24:53 2012 +0200 - - Added Latvian translation. - - help/Makefile.am | 2 +- - help/lv/lv.po | 2589 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 2590 insertions(+), 1 deletion(-) - -commit c694a415ca39552d4af686a82ab6274a2b914ffa -Author: Muhammet Kara -Date: Sat Mar 17 09:33:03 2012 +0200 - - [l10n]Updated Turkish translation - - po/tr.po | 970 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 488 insertions(+), 482 deletions(-) - -commit fd5818b617f4d94266cad6f0fc6125fe5cd0b395 -Author: Wouter Bolsterlee -Date: Fri Mar 16 23:01:41 2012 +0100 - - Updated Dutch translation - - po/nl.po | 928 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 467 insertions(+), 461 deletions(-) - -commit fb2ed49206b0c94bc496dfcfd169b2d25bfc0b4e -Author: Daniel Mustieles -Date: Fri Mar 16 17:08:59 2012 +0100 - - Updated Spanish translation - - help/es/es.po | 6525 ++++++++++++++++++++++++++++----------------------------- - 1 file changed, 3254 insertions(+), 3271 deletions(-) - -commit d91ef4d68696c6ce4d5b8e4342ba8e5d89ed02b4 -Author: Bruce Cowan -Date: Fri Mar 16 13:49:14 2012 +0000 - - Updated British English translation - - po/en_GB.po | 1253 ++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 646 insertions(+), 607 deletions(-) - -commit bdbe0969dea2b4893341723c3373e8944b09af98 -Author: A S Alam -Date: Thu Mar 15 20:48:04 2012 +0530 - - update Punjabi Translation - - po/pa.po | 3049 ++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 1364 insertions(+), 1685 deletions(-) - -commit b380f1066b1ca17c08d80b90a6f24b702fe9eb66 -Author: Marek Černocký -Date: Thu Mar 15 14:41:43 2012 +0100 - - Updated Czech translation - - po/cs.po | 932 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 469 insertions(+), 463 deletions(-) - -commit d921fc73d49814fd475e197cbb97e5aefe2d717d -Author: Sweta Kothari -Date: Thu Mar 15 14:55:44 2012 +0530 - - Updated Gujarati Translations - - po/gu.po | 1302 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 664 insertions(+), 638 deletions(-) - -commit 2301d0d0221b928fa1c644c1754977dabb6ed88d -Author: Krishnababu Krothapalli -Date: Thu Mar 15 12:04:40 2012 +0530 - - Updated Telugu Translations - - po/te.po | 32 ++++++++++++++++++-------------- - 1 file changed, 18 insertions(+), 14 deletions(-) - -commit d759c24318df3f50a3617965c48891f568a62a17 -Author: A S Alam -Date: Thu Mar 15 06:21:22 2012 +0530 - - update Punjabi Translation - - po/pa.po | 2923 +++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 1639 insertions(+), 1284 deletions(-) - -commit 20af573d9c30808d5f5a27d997c00a97c604c272 -Author: Anita Reitere -Date: Wed Mar 14 21:58:00 2012 +0200 - - Updated Latvian translation. - - po/lv.po | 1310 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 669 insertions(+), 641 deletions(-) - -commit 57116d58a1bc7447bd02991ae7902d06a239dbed -Author: Felix Riemann -Date: Wed Mar 14 20:35:50 2012 +0100 - - EogFileChooser: Use GnomeThumbnailFactory to create preview image - - Do this if no thumbnail exists yet. Avoids displaying too large thumbs - for images that have yet to be thumbnailed, breaking the file open dialog. - - https://bugzilla.gnome.org/show_bug.cgi?id=671944 - - src/eog-file-chooser.c | 37 ++++++++++++++++++++++++++++--------- - 1 file changed, 28 insertions(+), 9 deletions(-) - -commit 089c4d68620b91745f203f8c11969bd7f0536c8c -Author: David Planella -Date: Tue Mar 13 00:18:52 2012 +0100 - - Updated Catalan translation - - po/ca.po | 1260 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 650 insertions(+), 610 deletions(-) - -commit 31a24d3f50f3cc7defa16d54668cf5bf1850dee3 -Author: Antonio Fernandes C. Neto -Date: Fri Mar 9 12:57:53 2012 -0300 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 902 ++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 454 insertions(+), 448 deletions(-) - -commit ff4fd8ed7656b46205d34359cd37b2502327460c -Author: Kjartan Maraas -Date: Mon Mar 12 18:27:20 2012 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 346 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 176 insertions(+), 170 deletions(-) - -commit 917a8b5fce2202faf5439931af17c3779c4f0e4d -Author: Timo Jyrinki -Date: Mon Mar 12 11:14:23 2012 +0200 - - Finnish translation update from http://l10n.laxstrom.name/wiki/Gnome_3.4 translation sprint - - po/fi.po | 911 +++++++++++++++++++++++---------------------------------------- - 1 file changed, 328 insertions(+), 583 deletions(-) - -commit f9a5ec6522b616421f1f2d5d41f77c3c6ab788bd -Author: Felix Riemann -Date: Sat Mar 10 15:14:33 2012 +0100 - - Remove deprecated, unneeded and now effect-less GtkStyle-usage - - This stuff wasn't needed anymore since we dropped the GtkFrame as - parent for the EogScrollView widget. Also it didn't have any effect - at all in GTK+-3. Fixes more build warnings because of deprecations. - - https://bugzilla.gnome.org/show_bug.cgi?id=671402 - - src/eog-window.c | 14 -------------- - 1 file changed, 14 deletions(-) - -commit c87818df0fe3ea5a5783426011925d2e2e752b24 -Author: Adrian Zgorzałek -Date: Wed Feb 29 22:08:31 2012 +0100 - - Fix GDK deprecations - - Partially fixes compiling with -Werror-deprecated. - - http://bugzilla.gnome.org/show_bug.cgi?id=671402 - - src/eog-scroll-view.c | 9 +++++++-- - 1 file changed, 7 insertions(+), 2 deletions(-) - -commit edb39d51119e6bc4447582d720023f1788421893 -Author: Felix Riemann -Date: Sat Mar 10 15:11:38 2012 +0100 - - EogErrorMessageArea: Properly escape the error message markup - - Fixes broken error messages when printing messages containing markup - characters like '<' and '>'. - - src/eog-error-message-area.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 7fc2de129fdc3a4f1745bb3bd37903a19b7f2d18 -Author: Changwoo Ryu -Date: Sat Mar 10 21:16:43 2012 +0900 - - Updated Korean translation - - po/ko.po | 1240 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 642 insertions(+), 598 deletions(-) - -commit 8a08a42f1a98e19fcb2126d4b6f3937a0a4ef9f8 -Author: Arash Mousavi -Date: Sat Mar 10 01:56:19 2012 +0330 - - Updated Persian Translation - - po/fa.po | 1210 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 622 insertions(+), 588 deletions(-) - -commit 1600704f3bbd1e2c2b71c0a881c320cdbd10fc9b -Author: Tiffany Antopolski -Date: Fri Mar 9 19:01:37 2012 +0100 - - Updated Esperanto translation - - po/eo.po | 340 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 214 insertions(+), 126 deletions(-) - -commit b408f9e609aaee9f4c0d153b7e0f5bfbeb568e7a -Author: Yuri Myasoedov -Date: Wed Mar 7 18:25:42 2012 +0400 - - Updated Russian translation - - po/ru.po | 838 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 422 insertions(+), 416 deletions(-) - -commit 76177cd2fd935bae05ed5c16efefa7d27d026a6b -Author: Alexander Shopov -Date: Wed Mar 7 06:41:30 2012 +0200 - - Updated Bulgarian translation - - po/bg.po | 940 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 474 insertions(+), 466 deletions(-) - -commit 738ba417c3d6f78acaf7345b3f3eea8c03bf051b -Author: Bruno Brouard -Date: Tue Mar 6 22:21:02 2012 +0100 - - Updated French translation - - po/fr.po | 1317 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 680 insertions(+), 637 deletions(-) - -commit 853e129605a6ce471de5388c2055f4a9a41395d5 -Author: Felix Riemann -Date: Mon Mar 5 21:08:46 2012 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit fdb9e8081ac59f4e720213ef3d223275748771c6 -Author: Felix Riemann -Date: Mon Mar 5 20:59:49 2012 +0100 - - Prepare for release 3.3.91 - - NEWS | 45 +++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 45 insertions(+) - -commit bd46c58ed587d228f00ef0056faa95dd836727f3 -Author: Nilamdyuti Goswami -Date: Mon Mar 5 20:05:14 2012 +0530 - - Assamese translation completed - - po/as.po | 1313 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 672 insertions(+), 641 deletions(-) - -commit b0fc5acb663f87fcffe5d8d4f4dafbdcfc4d76ed -Author: YunQiang Su -Date: Mon Mar 5 17:58:49 2012 +0800 - - update Simplified Chinese (zh_CN) translation - - po/zh_CN.po | 1277 ++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 660 insertions(+), 617 deletions(-) - -commit 807d0a9c6205aaeeb0e31662727b795df6432196 -Author: Daniel Korostil -Date: Sun Mar 4 22:11:31 2012 +0200 - - Added uk translation - - po/uk.po | 1306 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 674 insertions(+), 632 deletions(-) - -commit 9e26152be8b9b20c79ae6deeeddcc57e4982bffb -Author: Fran Diéguez -Date: Sun Mar 4 20:13:50 2012 +0100 - - Updated Galician translations - - po/gl.po | 346 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 176 insertions(+), 170 deletions(-) - -commit c7549594ed526151c3b22668c0cee74f5937ba7a -Author: Carlos Garcia Campos -Date: Mon Feb 6 17:08:37 2012 +0000 - - toolbar-editor: Fix a crash when dropping an item to the toolbar - - action_sensitive_cb can be called with the dnd tool item when it doesn't - have an ancestor. - - (Cherry-picked from Evince to eog to fix bug #671202) - https://bugzilla.gnome.org/show_bug.cgi?id=671202 - - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 8 ++++++-- - 1 file changed, 6 insertions(+), 2 deletions(-) - -commit bf0baa922062a9b25efb97043460c04a1335b136 -Author: Gabor Kelemen -Date: Sun Mar 4 01:18:04 2012 +0100 - - Updated Hungarian translation - - po/hu.po | 408 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 204 insertions(+), 204 deletions(-) - -commit 691707d41628e9e45dbe5d276c71ca0a988be18c -Author: Gabor Kelemen -Date: Sun Mar 4 01:14:12 2012 +0100 - - Updated Hungarian help translation - - help/hu/hu.po | 568 ++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 289 insertions(+), 279 deletions(-) - -commit 4a9d39f441c9a453c525ed3db755a8edc80e6bdc -Author: Gabor Kelemen -Date: Sun Mar 4 01:05:38 2012 +0100 - - Updated Hungarian translation - - po/hu.po | 669 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 354 insertions(+), 315 deletions(-) - -commit e1125381a779fa4d79ea96fde5de819bc3a0f017 -Author: Piotr Drąg -Date: Sat Mar 3 23:57:34 2012 +0100 - - Updated Polish translation - - po/pl.po | 690 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 366 insertions(+), 324 deletions(-) - -commit d58f23ad76cbff3c833733964223b1eec66cbfc8 -Author: Inaki Larranaga Murgoitio -Date: Sat Mar 3 18:54:37 2012 +0100 - - Updated Basque language - - po/eu.po | 695 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 369 insertions(+), 326 deletions(-) - -commit 81a72cb88d7c299c1335063a79c49c46c528c7e3 -Author: Nguyễn Thái Ngọc Duy -Date: Sat Mar 3 23:31:38 2012 +0700 - - Updated Vietnamese translation - - po/vi.po | 13 ++++++------- - 1 file changed, 6 insertions(+), 7 deletions(-) - -commit c40c947652559c8041cb0a7f953b4f9576bc52fd -Author: Nguyễn Thái Ngọc Duy -Date: Sat Mar 3 23:29:59 2012 +0700 - - po/vi: import from Damned Lies - - po/vi.po | 1290 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 659 insertions(+), 631 deletions(-) - -commit d68944a97880afea3d4ea9904eb5af07eaa0065e -Author: Daniel Mustieles -Date: Fri Mar 2 14:17:46 2012 +0100 - - Updated Spanish translation - - po/es.po | 960 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 483 insertions(+), 477 deletions(-) - -commit 796af3de157bd0476386c806102c374cc5881f54 -Author: Yaron Shahrabani -Date: Fri Mar 2 14:10:05 2012 +0200 - - Updated Hebrew translation. - - po/he.po | 418 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 212 insertions(+), 206 deletions(-) - -commit 6a83a268414248f3d236cb47830a85810a1375e0 -Author: Ihar Hrachyshka -Date: Fri Mar 2 12:13:44 2012 +0300 - - Updated Belarusian translation. - - po/be.po | 939 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 473 insertions(+), 466 deletions(-) - -commit e961bf85da9f860ffded6f7a4e303e2a5ce13675 -Author: Мирослав Николић -Date: Thu Mar 1 22:38:47 2012 +0100 - - Updated Serbian translation - - po/sr.po | 942 +++++++++++++++++++++++++++++---------------------------- - po/sr@latin.po | 942 +++++++++++++++++++++++++++++---------------------------- - 2 files changed, 946 insertions(+), 938 deletions(-) - -commit b475d99d1af9c402eb3e4398a38fc599a09ea7eb -Author: Mattias Põldaru -Date: Thu Mar 1 17:55:57 2012 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 14 +++++++++----- - 1 file changed, 9 insertions(+), 5 deletions(-) - -commit f366b133c152a7f910842588859b16425e7f6df2 -Author: Daniel Nylander -Date: Thu Mar 1 13:41:17 2012 +0100 - - Updated Swedish translation - - po/sv.po | 808 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 407 insertions(+), 401 deletions(-) - -commit 59e675c621cf0e9bb4567321a877ebb3c0075cc4 -Author: Felix Riemann -Date: Wed Feb 29 22:14:22 2012 +0100 - - Fix some more deprecation warnings - - Still not all though. - - src/eog-scroll-view.c | 2 +- - src/eog-uri-converter.c | 4 ++-- - 2 files changed, 3 insertions(+), 3 deletions(-) - -commit 176ebc22b3e11271cb32b5e458cbc6c7cc3fb113 -Author: Felix Riemann -Date: Wed Feb 29 21:44:08 2012 +0100 - - Fix warnings due to deprecations in librsvg-2.35 - - src/main.c | 9 +++++++-- - 1 file changed, 7 insertions(+), 2 deletions(-) - -commit 2264f943fcb2619ae27b91f852354d13e9baf801 -Author: Mario Blättermann -Date: Wed Feb 29 21:51:51 2012 +0100 - - [l10n] Updated German translation - - po/de.po | 349 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 172 insertions(+), 177 deletions(-) - -commit 9bfc7b316206e49466a272c6e510792c18acc0e2 -Author: Matej Urbančič -Date: Wed Feb 29 18:46:39 2012 +0100 - - Updated Slovenian translation - - po/sl.po | 566 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 286 insertions(+), 280 deletions(-) - -commit b9e1aa834cdc79ee162063581fc284bbbabaf07c -Author: Didier Roche -Date: Wed Feb 29 18:03:22 2012 +0100 - - Add extra keywords for searching in GNOME Shell and Unity - - This should list eog as result when searching for these keywords - in GNOME Shell and Unity. - - https://bugzilla.gnome.org/show_bug.cgi?id=671038 - - data/eog.desktop.in.in | 2 ++ - 1 file changed, 2 insertions(+) - -commit 81cb0682eae5ab9864737132abb4f0c18b10ff8c -Author: Adrian Zgorzałek -Date: Tue Feb 28 21:33:40 2012 +0100 - - Remove deprecated GtkVBox/GtkHBox usage - - The GtkHBox and GtkVBox have been deprecated by now. - Also be consistent with the other properties declarations - and use PROP_0 instead of PROP = 1. - - https://bugzilla.gnome.org/show_bug.cgi?id=671008 - - src/eog-print-preview.c | 3 ++- - src/eog-sidebar.c | 5 ++++- - src/eog-sidebar.h | 4 ++-- - src/eog-thumb-nav.c | 8 ++++++-- - src/eog-thumb-nav.h | 4 ++-- - 5 files changed, 16 insertions(+), 8 deletions(-) - -commit d9ac4979739d2558fbaf4346186fcd8a34de7371 -Author: Dr.T.Vasudevan -Date: Wed Feb 29 17:26:40 2012 +0530 - - updated Tamil translation - - po/ta.po | 681 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 358 insertions(+), 323 deletions(-) - -commit b96480b8794021f178303bd2e1acaedbd1b24e11 -Author: Daniel Mustieles -Date: Sun Feb 26 20:07:37 2012 +0100 - - Updated Spanish translation - - help/es/es.po | 81 +++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 45 insertions(+), 36 deletions(-) - -commit 38f49dca4785b2e1a36c9c1fe6ba7d9c84f022a0 -Author: Felix Riemann -Date: Sun Feb 26 15:51:23 2012 +0100 - - EogExifDetails: Take Exif IFD into account when creating hash keys - - This should solve conflicts with Exif values that have the same number - but are stored in different IFD blocks (e.g GPS and Interoperability). - - https://bugzilla.gnome.org/show_bug.cgi?id=670700 - - src/eog-exif-details.c | 13 +++++++++++-- - 1 file changed, 11 insertions(+), 2 deletions(-) - -commit db599c9fddc08c28559d1ff07e9510c3b89a2741 -Author: Tiffany Antopolski -Date: Sat Feb 25 03:19:23 2012 +0100 - - help: fixed some inconsistencies. - - https://bugzilla.gnome.org/show_bug.cgi?id=670245 - - help/C/format-change.page | 68 ++++++++++++++++++++--------------------- - help/C/plugin-exif-digital.page | 48 ++++++++++++++--------------- - 2 files changed, 58 insertions(+), 58 deletions(-) - -commit ead72440ebec2c247ebefe44aeb97175320b47b9 -Author: Fran Diéguez -Date: Sat Feb 25 17:18:22 2012 +0100 - - Updated galician translations for doc - - Signed-off-by: Fran Diéguez - - help/gl/gl.po | 284 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 283 insertions(+), 1 deletion(-) - -commit 4cc4a9d603e4bdf8a9b7349aba8810f4b8720d0a -Author: Kristjan SCHMIDT -Date: Wed Feb 22 19:58:06 2012 +0100 - - Updated Esperanto translation - - po/eo.po | 1290 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 645 insertions(+), 645 deletions(-) - -commit 06e7a1dc41212e3bc042f42d513c891fcadfe244 -Author: Tiffany Antopolski -Date: Tue Feb 21 20:15:23 2012 +0100 - - help C: s/floatright/floatend and floatleft/floatstart - - This makes it better for right to left languages. - - help/C/plugin-exif-digital.page | 2 +- - help/C/plugin-fullscreen-double-click.page | 2 +- - help/C/plugin-postr.page | 2 +- - help/C/plugin-send-by-mail.page | 2 +- - help/C/preferences.page | 8 ++++---- - 5 files changed, 8 insertions(+), 8 deletions(-) - -commit 50d81cf7e12dfe915b14212ada9ac2d3dbb55fa6 -Author: Kenneth Nielsen -Date: Mon Feb 20 22:56:46 2012 +0100 - - Updated Danish translation - - po/da.po | 684 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 361 insertions(+), 323 deletions(-) - -commit 6acb51a7a58556e48a11ea821b0809b06f0f3164 -Author: Felix Riemann -Date: Mon Feb 20 21:16:09 2012 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ddc1c7b5df0ce4f488f0ffe52dc68f9ba877090f -Author: Felix Riemann -Date: Mon Feb 20 21:08:35 2012 +0100 - - Preapare for release 3.3.90 - - NEWS | 26 +++++++++++++++++++++++++- - 1 file changed, 25 insertions(+), 1 deletion(-) - -commit 9bd1a0720cb42486b87f0802a41346326af7bed6 -Author: Robert Ancell -Date: Thu Feb 16 16:36:34 2012 +1100 - - Fix deprecated GTK API usage - - https://bugzilla.gnome.org/show_bug.cgi?id=670184 - - src/eog-print-image-setup.c | 2 +- - src/eog-scroll-view.c | 6 +++--- - src/eog-sidebar.c | 2 +- - 3 files changed, 5 insertions(+), 5 deletions(-) - -commit 7f2f92bfbdb1559008ba15116c7a8309de0b8ad8 -Author: Felix Riemann -Date: Sun Feb 19 14:24:32 2012 +0100 - - Move clearing of mutexes from dispose into finalize handlers - - We cannot guard the new-style GMutexes against repeated clearing in - dispose handlers. So move them into finalize handlers to prevent that - scenario (which causes double frees) from happening. - - src/eog-image.c | 13 +++++++++++++ - src/eog-list-store.c | 11 ++++++++++- - 2 files changed, 23 insertions(+), 1 deletion(-) - -commit b5f61d90d0478378cf7cf21bf5ade9eded0ae9f2 -Author: Felix Riemann -Date: Sun Feb 19 14:13:40 2012 +0100 - - Use new GLib threading API - - https://bugzilla.gnome.org/show_bug.cgi?id=670185 - - src/eog-image-private.h | 2 +- - src/eog-image.c | 39 ++++++++++++++++++--------------------- - src/eog-jobs.c | 8 +++++--- - src/eog-list-store.c | 14 +++++++------- - 4 files changed, 31 insertions(+), 32 deletions(-) - -commit 52d44a8a62f9ebb19e32014a6fb4f32089c20981 -Author: Praveen Illa -Date: Sat Feb 18 23:26:22 2012 +0530 - - Updated Telugu Translation - - po/te.po | 1308 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 648 insertions(+), 660 deletions(-) - -commit 9ef7d86bbb347eac4b5ba7eb14035dcb986a1c0c -Author: Robert Ancell -Date: Thu Feb 16 16:31:05 2012 +1100 - - Remove unused variables - - src/eog-print-preview.c | 4 ---- - src/eog-window.c | 3 --- - 2 files changed, 7 deletions(-) - -commit b06f858159befe2d764c21c2f871208c39268af5 -Author: Felix Riemann -Date: Thu Feb 16 12:14:10 2012 +0100 - - EogPrintPreview: Avoid unnecessary color parsing - - The RGB values of black and white are known and thus can be set directly - without parsing them with GdkRGBA first. - - src/eog-print-preview.c | 7 ++----- - 1 file changed, 2 insertions(+), 5 deletions(-) - -commit 57ce24e1ed32bf9af1b39592179e84b607600aad -Author: Felix Riemann -Date: Wed Feb 15 16:13:23 2012 +0100 - - Mark several private functions as internal - - src/eog-error-message-area.h | 3 +++ - src/eog-metadata-sidebar.h | 2 ++ - src/eog-plugin-engine.h | 2 ++ - src/eog-print-image-setup.h | 1 + - 4 files changed, 8 insertions(+) - -commit 076cb1b19e5c00203b3475bf6e79f42ff3aa6ba4 -Author: Felix Riemann -Date: Wed Feb 15 15:14:48 2012 +0100 - - EogPrintPreview: Draw focus rectangle around image and not the page - - Besides making the focus rectangle slightly visible again it also makes - more sense this way as the user is interacting with the image on the - page and not the whole page itself. - - src/eog-print-preview.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 16f37f2ee7d20e47a7fc88793a4afd0f1bde2c3e -Author: Felix Riemann -Date: Wed Feb 15 15:10:36 2012 +0100 - - EogPrintPreview: Replace deprecated Gdk function calls - - src/eog-print-preview.c | 19 ++++++++++--------- - 1 file changed, 10 insertions(+), 9 deletions(-) - -commit d82064ed11afe1dc6c5d1ee62170ed054a07a39b -Author: Felix Riemann -Date: Wed Feb 15 14:35:11 2012 +0100 - - MetadataSidebar: Add a tooltip to the folder button - - src/eog-metadata-sidebar.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit 00aad0826bb7cba95f0376732a4e19b150f058a0 -Author: Felix Riemann -Date: Wed Feb 15 14:25:23 2012 +0100 - - MetadataSidebar: Change layout of the data values - - Move the value labels in their own line below their key labels. - That improves the visibility of the values and takes away less - horizontal space for image viewing. Unfortunately scrolling could be - necessary now as the vertical space requirement increased. - - src/eog-metadata-sidebar.c | 32 ++++++++++++++++++++++---------- - 1 file changed, 22 insertions(+), 10 deletions(-) - -commit b6b0641a98f9f0f39717126036498d747bc18845 -Author: Felix Riemann -Date: Tue Feb 14 22:06:21 2012 +0100 - - Make metadata values in MetadataSidebar selectable - - src/eog-metadata-sidebar.c | 1 + - 1 file changed, 1 insertion(+) - -commit d3899a2c956d3c49c559377fda219b0749fb3a3a -Author: Bruno Brouard -Date: Sun Feb 12 12:36:34 2012 +0100 - - Updated French doc translation - - help/fr/fr.po | 51 +++++++++++++++++++++++++++++++-------------------- - 1 file changed, 31 insertions(+), 20 deletions(-) - -commit ed49527d92d372dbc18d8beba7e07ab857bf1ab4 -Author: Мирослав Николић -Date: Thu Feb 9 21:10:59 2012 +0100 - - Updated Serbian translation - - po/sr.po | 677 ++++++++++++++++++++++++++++++--------------------------- - po/sr@latin.po | 677 ++++++++++++++++++++++++++++++--------------------------- - 2 files changed, 710 insertions(+), 644 deletions(-) - -commit be54b454c35c9da9e346690876f03f2e41cf14a0 -Author: Felix Riemann -Date: Wed Feb 8 20:45:10 2012 +0100 - - Fix system plugins data dir path - - eog-plugins was changed to move the plugin's data files out of the - library path. Pass the correct path to libpeas as well, so - system-wide plugins can query this path dynamically from the engine. - - src/eog-plugin-engine.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit f974f23f9a4827a2d8e2f119df7ffc43ead81300 -Author: Felix Riemann -Date: Wed Feb 8 20:29:58 2012 +0100 - - job-queue: Update to new GThread API introduced with glib-2.31 - - src/eog-job-queue.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit bc4e5b657a127649470c3ece9d893e9ca5105516 -Author: Felix Riemann -Date: Wed Feb 8 17:42:59 2012 +0100 - - job-queue: Use static GMutex and GCond structs - - Newest glib allows to use GMutex and GCond statically. - This makes use of this in an obvious place. - - src/eog-job-queue.c | 23 ++++++++++------------- - 1 file changed, 10 insertions(+), 13 deletions(-) - -commit 9edf86217f5e2d2ff028146e62a6636a82be4207 -Author: Felix Riemann -Date: Wed Feb 8 16:37:44 2012 +0100 - - Remove usage of g_thread_init - - g_thread_init() has become obsolete with the current glib releases. - This clears eog from the direct dependency on libgthread. - - configure.ac | 1 - - src/eog-job-queue.c | 2 -- - src/main.c | 3 --- - 3 files changed, 6 deletions(-) - -commit 2eb3f32061d19af97e38d87044d273fd00b03d65 -Author: Jiro Matsuzawa -Date: Thu Feb 9 00:39:13 2012 +0900 - - [l10n] Update Japanese translation - - po/ja.po | 1269 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 648 insertions(+), 621 deletions(-) - -commit 06a2dd6e9ba8b69242685f85db1d8a9a895815a3 -Author: Mattias Põldaru -Date: Wed Feb 8 11:06:54 2012 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 752 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 380 insertions(+), 372 deletions(-) - -commit c5b994e949f3017947c239930033957d4f3f17ae -Author: Felix Riemann -Date: Mon Feb 6 23:33:18 2012 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 4b5c7eeddc982c3019afe99153ab993d32900336 -Author: Felix Riemann -Date: Mon Feb 6 23:28:00 2012 +0100 - - Prepare for release 3.3.5 - - NEWS | 30 ++++++++++++++++++++++++++++++ - 1 file changed, 30 insertions(+) - -commit af78446ab5ffb023f3caf2977be0aa2260d31ea0 -Author: Fran Diéguez -Date: Mon Feb 6 23:05:15 2012 +0100 - - Updated Galician doc translations - - help/gl/gl.po | 466 +++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 318 insertions(+), 148 deletions(-) - -commit e2125c36cb5d27b7ad1b9a55943df2522c9fdcde -Author: Fábio Nogueira -Date: Sun Feb 5 21:25:24 2012 -0200 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 684 ++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 361 insertions(+), 323 deletions(-) - -commit d884606a7524138bd2e35a901f68b57bee8631e3 -Author: Paul Seyfert -Date: Sun Feb 5 17:10:41 2012 +0100 - - Updated German translation - - po/de.po | 638 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 332 insertions(+), 306 deletions(-) - -commit b52b965d0d25f56b561bdea9e43d9fd3510f6338 -Author: Wouter Bolsterlee -Date: Sat Feb 4 15:27:29 2012 +0100 - - Updated Dutch translation - - po/nl.po | 636 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 331 insertions(+), 305 deletions(-) - -commit 6e5d9055be16d1b0bb0518edc1b34b3fba46144a -Author: Tiffany Antopolski -Date: Thu Feb 2 20:53:47 2012 -0500 - - po: Updated en_CA.po - - po/en_CA.po | 1599 +++++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 1013 insertions(+), 586 deletions(-) - -commit b2b3aa269cba01e129d92905cde6268aa9e23eb3 -Author: Felix Riemann -Date: Wed Jan 25 20:54:52 2012 +0100 - - Assume sRGB if no display profile is set - - Gimp and Firefox make this assumption as well. - - https://bugzilla.gnome.org/show_bug.cgi?id=563760 - - src/eog-window.c | 15 +++++++++------ - 1 file changed, 9 insertions(+), 6 deletions(-) - -commit c93aa0b94ba6142c78ea5025a56a0f70c6fc0739 -Author: Claudio Saavedra -Date: Wed Jan 25 13:18:03 2012 +0200 - - Do not show the titlebar when eog is maximized. - - This is the default behavior for GNOME 3.4. - - https://bugzilla.gnome.org/show_bug.cgi?id=668652 - - configure.ac | 2 +- - src/eog-window.c | 2 ++ - 2 files changed, 3 insertions(+), 1 deletion(-) - -commit b1c0185858066c92a432957622c2e898a658fc21 -Author: Kjartan Maraas -Date: Wed Jan 25 11:20:32 2012 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 862 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 431 insertions(+), 431 deletions(-) - -commit bc16cbf6b026e1a4cd6d7aeccba3efcb8be29d2f -Author: Timo Jyrinki -Date: Tue Jan 24 15:40:13 2012 +0200 - - Updated Finnish translation. - - po/fi.po | 697 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 372 insertions(+), 325 deletions(-) - -commit e897c5ed628ccbe2e5a41ed77a3559a7cd977d0b -Author: Matej Urbančič -Date: Sat Jan 21 21:01:36 2012 +0100 - - Updated Slovenian translation - - po/sl.po | 687 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 358 insertions(+), 329 deletions(-) - -commit 22792935e5fb23478578f33e91cbfd8b490239f0 -Author: Marek Černocký -Date: Thu Jan 19 13:19:43 2012 +0100 - - Updated Czech translation - - po/cs.po | 668 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 348 insertions(+), 320 deletions(-) - -commit 5b3d916f694433e99432329dab96cbb7e9da66a1 -Author: Felix Riemann -Date: Wed Jan 18 20:09:07 2012 +0100 - - Update mtime when setting remote images as wallpaper - - Otherwise libgnome-desktop's wallpaper cache might not pick up the new - background if a local copy already existed. - - https://bugzilla.gnome.org/show_bug.cgi?id=664747 - - src/eog-window.c | 11 +++++++++++ - 1 file changed, 11 insertions(+) - -commit 6b28ca6b46fda34855d89564e5097324947ac1b9 -Author: Felix Riemann -Date: Wed Jan 18 16:07:19 2012 +0100 - - Don't force-enable the sidebar on startup once a page is added - - https://bugzilla.gnome.org/show_bug.cgi?id=668178 - - src/eog-window.c | 3 --- - 1 file changed, 3 deletions(-) - -commit 60f73ef05e4efdad226440d8fca8fe0f11b12a63 -Author: Daniel Nylander -Date: Wed Jan 18 10:06:20 2012 +0100 - - Updated Swedish translation - - po/sv.po | 943 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 598 insertions(+), 345 deletions(-) - -commit c4f02b2d4bd518b2397b9b7d61a6c49a3223e577 -Author: Felix Riemann -Date: Mon Jan 16 23:29:50 2012 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 1dad3b215d7fa7839daf8b4d43072eac21269b70 -Author: Felix Riemann -Date: Mon Jan 16 23:26:17 2012 +0100 - - Prepare for release 3.3.4 - - NEWS | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - -commit 1b00c9c6a102a45c996574cc3bf8a49a91eb32de -Author: Fran Diéguez -Date: Sun Jan 15 15:47:18 2012 +0100 - - Updated Galician translations - - po/gl.po | 1252 ++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 639 insertions(+), 613 deletions(-) - -commit 5ffdfe5041e76620d67584ce6badc3c6d5ef3119 -Author: Alexander Shopov -Date: Sun Jan 8 09:06:26 2012 +0200 - - Updated Bulgarian translation - - po/bg.po | 684 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 360 insertions(+), 324 deletions(-) - -commit cd31ca4113ee841a767865963cff268ae9844441 -Author: Jovan Naumovski -Date: Sat Jan 7 00:55:54 2012 +0100 - - Updated Macedonian translation. - - po/mk.po | 1764 ++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 1076 insertions(+), 688 deletions(-) - -commit 66983abb7646a9b2e79be69dddb5e3af1b23082b -Author: Yuri Myasoedov -Date: Fri Jan 6 01:44:53 2012 +0400 - - Updated Russian translation - - po/ru.po | 649 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 339 insertions(+), 310 deletions(-) - -commit 964e0e2fb706275cbdd047fe080d80402a8c30f5 -Author: Felix Riemann -Date: Wed Jan 4 21:12:04 2012 +0100 - - Remove unneeded custom signal marshaller - - src/eog-marshal.list | 1 - - src/eog-scroll-view.c | 3 +-- - 2 files changed, 1 insertion(+), 3 deletions(-) - -commit 982a69b0888fc5d0ac3427166aa5cca30b0e97b4 -Author: Felix Riemann -Date: Wed Jan 4 21:08:27 2012 +0100 - - Extend print preview to scale with plus and minus from keyboard as well - - https://bugzilla.gnome.org/show_bug.cgi?id=495716 - - src/eog-print-image-setup.c | 68 +++++++++++++++++++++++++++++++++++++++++---- - src/eog-print-preview.c | 47 +++++++------------------------ - src/eog-print-preview.h | 6 +++- - 3 files changed, 78 insertions(+), 43 deletions(-) - -commit a7a1cde3fb2d13214b0dd30595d652868ff118af -Author: Claudio Saavedra -Date: Wed Jan 4 17:40:41 2012 +0100 - - Make it possible to scale the print preview using the scrollwheel - - https://bugzilla.gnome.org/show_bug.cgi?id=495716 - - src/eog-print-image-setup.c | 14 ++++++++ - src/eog-print-preview.c | 79 +++++++++++++++++++++++++++++++++++++++++++++ - src/eog-print-preview.h | 2 ++ - 3 files changed, 95 insertions(+) - -commit bcf7817737f0412e6a6de2686ec64b31dd470dca -Author: Felix Riemann -Date: Wed Jan 4 15:39:26 2012 +0100 - - Enable more Drag&Drop actions when eog is drag source - - Enable the link and ask actions allowing to create symlinks in Nautilus - or triggering a menu asking what to do. Also enable the move action, - which was not specifically enabled before but still worked anyway. - - https://bugzilla.gnome.org/show_bug.cgi?id=667076 - - src/eog-scroll-view.c | 3 ++- - src/eog-thumb-view.c | 5 ++++- - 2 files changed, 6 insertions(+), 2 deletions(-) - -commit f5d1b331717573bfab58ace8feb31df4fadbcfb7 -Author: Muhammet Kara -Date: Sat Dec 31 14:49:17 2011 +0200 - - [l10n]Updated Turkish translation - - po/tr.po | 623 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 324 insertions(+), 299 deletions(-) - -commit 939972523d8c07cb00fd1aaec3b9bf39ac033ea2 -Author: Yaron Shahrabani -Date: Fri Dec 30 10:52:18 2011 +0200 - - Updated Hebrew translation. - - po/he.po | 655 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 342 insertions(+), 313 deletions(-) - -commit 002e8fae8f10d488ad68ef1404ec3ebbe0333ecf -Author: Ihar Hrachyshka -Date: Fri Dec 23 22:05:02 2011 +0300 - - Updated Belarusian translation. - - po/be.po | 622 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 324 insertions(+), 298 deletions(-) - -commit c4dfc8e4686b2b7b16e9ff28841ce7d21bf9493d -Author: Kjartan Maraas -Date: Wed Dec 21 21:59:14 2011 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 632 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 329 insertions(+), 303 deletions(-) - -commit 224bf70728d10d4bc7027cc8d871c581528f766c -Author: Tiffany Antopolski -Date: Tue Dec 20 23:13:01 2011 -0500 - - [help/C] fixed validation issues. - - help/C/index.page | 3 ++- - help/C/preferences.page | 6 +++--- - 2 files changed, 5 insertions(+), 4 deletions(-) - -commit 8e54083df25cb6ccd666e1d4a09d7e0a118ab257 -Author: Daniel Mustieles -Date: Tue Dec 20 13:14:47 2011 +0100 - - Updated Spanish translation - - po/es.po | 622 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 324 insertions(+), 298 deletions(-) - -commit deb2b63128a14dbec75c165e041c6da5023bf54e -Author: Felix Riemann -Date: Mon Dec 19 22:41:38 2011 +0100 - - Fix build when not building with libexif and/or exempi - - There were quite some #ifdefs missing. - - https://bugzilla.gnome.org/show_bug.cgi?id=666556 - - src/eog-metadata-sidebar.c | 47 ++++++++++++++++++++++++++++++++++++++++------ - 1 file changed, 41 insertions(+), 6 deletions(-) - -commit 337571057d7e5349e096bdfef4bf68bcd4ee947f -Author: Felix Riemann -Date: Mon Dec 19 20:41:53 2011 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8e73fb09d2a5623a4cdca13826f118ba435e5d5f -Author: Felix Riemann -Date: Mon Dec 19 20:34:38 2011 +0100 - - Prepare for release 3.3.3 - - NEWS | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - -commit eee6b67bd1b9b1f0d479d9b6dcb36cf1c8870e5e -Author: Piotr Drąg -Date: Mon Dec 19 18:35:05 2011 +0100 - - Updated POTFILES.in - - po/POTFILES.in | 17 +++++++++-------- - 1 file changed, 9 insertions(+), 8 deletions(-) - -commit 7ac112f2dde1dcf76b5693d3036dd2d2625a193f -Author: Felix Riemann -Date: Mon Dec 19 18:20:30 2011 +0100 - - Make Exif/XMP summaries available as sidebar - - Makes the data from the properties dialog available as a sidebar. - A button opens the details tab in the properties dialog. - This is graphically still a bit roughg. - Committing it in hopes to get some early feedback. - - https://bugzilla.gnome.org/show_bug.cgi?id=616438 - - src/Makefile.am | 2 + - src/eog-exif-util.c | 91 +++++++ - src/eog-exif-util.h | 20 +- - src/eog-metadata-sidebar.c | 634 ++++++++++++++++++++++++++++++++++++++++++++ - src/eog-metadata-sidebar.h | 61 +++++ - src/eog-properties-dialog.c | 118 ++------- - src/eog-window.c | 46 +++- - src/eog-window.h | 2 + - 8 files changed, 853 insertions(+), 121 deletions(-) - -commit fa744735911a7445bd83f2119385b82e674b020c -Author: Felix Riemann -Date: Thu Dec 15 19:36:06 2011 +0100 - - Use new DBus API to show the current image in the file browser - - This improves the functionality implemented with commit 9df5fd43. - The new API that will be included in Nautilus 3.3.4 not only opens a - view for the containing folder but also marks the image in the view. - The old behaviour is still available as fallback if the new API is - not offered on the system. - - https://bugzilla.gnome.org/show_bug.cgi?id=650402 - - src/eog-util.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - src/eog-util.h | 4 +++ - src/eog-window.c | 40 ++++---------------------- - 3 files changed, 96 insertions(+), 34 deletions(-) - -commit ec1e5e54eae8f499a80a7a6a0f6c32b657af7a2a -Author: Matej Urbančič -Date: Fri Dec 16 15:56:42 2011 +0100 - - Updated Slovenian translation - - help/sl/sl.po | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 9cc52b559f4520de9bee587cac4988d12898b966 -Author: Felix Riemann -Date: Wed Dec 14 23:09:23 2011 +0100 - - Rename variable in data dirs Makefile.am - - This was forgotten in commit 4c93c41f and fixes distcheck. - - data/Makefile.am | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ab4c398e363345b9d486c701cdb48322bfff244a -Author: Javier Sánchez -Date: Thu Oct 27 12:16:27 2011 +0200 - - Fixed bug 607287 - visibility issue while saving files - - - Reset "metadata::nautilus-icon-position" of the target file when we - copy the file without modifications. - - https://bugzilla.gnome.org/show_bug.cgi?id=607287 - - src/eog-image.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -commit 4c93c41fcfc1cab32c10a66e247d4a0fb3d60a05 -Author: Felix Riemann -Date: Wed Dec 14 22:02:36 2011 +0100 - - Replace deprecated GtkRCStyle usage with a GtkCssProvider - - Makes EogThumbNav's scrollbar style similar to pre-3.x versions again. - - data/Makefile.am | 4 ++-- - data/eog.css | 7 +++++++ - data/gtkrc | 9 --------- - src/main.c | 21 +++++++++++++++++++-- - 4 files changed, 28 insertions(+), 13 deletions(-) - -commit 3d1859e321b9dea27e49bab9626044f3f5835420 -Author: Claudio Saavedra -Date: Wed Dec 14 14:56:31 2011 +0200 - - Use the preferred interpolation type when zoomed instead of assuming the right one - - https://bugzilla.gnome.org/show_bug.cgi?id=665897 - - src/eog-scroll-view.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - -commit 32109eb43cb2a856f836d31b99cc08dfe675182d -Author: Kuang Chen -Date: Wed Dec 7 17:33:32 2011 +0000 - - Update Simplified Chinese help translation. - - help/zh_CN/zh_CN.po | 4883 +++++++++++++++++++++++++++++++++++++-------------- - 1 file changed, 3604 insertions(+), 1279 deletions(-) - -commit da78cc9ce6d8f02af9003d613fbb88951d0130bc -Author: Felix Riemann -Date: Wed Nov 30 14:51:05 2011 +0100 - - Replace uses of deprecated gdk_app_launch_context_new function - - Use gdk_display_get_app_launch_context as advertised in GTK+ docs. - - src/eog-window.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit 208361c7f97076aa12d86801500decf7974d1040 -Author: Felix Riemann -Date: Wed Nov 30 14:03:40 2011 +0100 - - EogPrintImageSetup: Convert internal GtkTables to GtkGrids - - src/eog-print-image-setup.c | 80 ++++++++++++++++++++++----------------------- - 1 file changed, 40 insertions(+), 40 deletions(-) - -commit 7fd3bcf82459b6d370649119ee10b6be902b89f1 -Author: Felix Riemann -Date: Wed Nov 30 13:38:25 2011 +0100 - - EogPrintImageSetup: Derive from GtkTable instead of GtkGrid - - GtkTable has been deprecated in favor of GtkGrid. - - src/eog-print-image-setup.c | 19 ++++++------------- - src/eog-print-image-setup.h | 4 ++-- - 2 files changed, 8 insertions(+), 15 deletions(-) - -commit c02ff5d5ebe9f86855c3e5d8827fae4d2846721b -Author: Felix Riemann -Date: Wed Nov 30 12:30:00 2011 +0100 - - Don't use deprecated gdk_cursor_unref() anymore - - src/eog-print-preview.c | 2 +- - src/eog-scroll-view.c | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit 2ec0b081b48a4f38c1798d70040f489af103a396 -Author: Wouter Bolsterlee -Date: Tue Nov 29 21:37:11 2011 +0100 - - Updated Dutch translation by Wouter Bolsterlee - - po/nl.po | 373 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 193 insertions(+), 180 deletions(-) - -commit 8af8ac974294f9a42a8f7e43aaf251bbd4141c7d -Author: Felix Riemann -Date: Sat Nov 26 16:11:45 2011 +0100 - - Stop using g_format_size_for_display() - - It uses the wrong unit suffixes/basis and has since been declared as - deprecated. Replaced by g_format_size() using the correct basis. - - src/eog-file-chooser.c | 4 ++-- - src/eog-properties-dialog.c | 2 +- - src/eog-thumb-view.c | 2 +- - src/eog-window.c | 4 ++-- - 4 files changed, 6 insertions(+), 6 deletions(-) - -commit 00ab54e04b7bbf2592b99152339569138ce9091f -Author: Felix Riemann -Date: Sat Nov 26 16:05:44 2011 +0100 - - Replace gtk_{v,h}box new with gtk_box_new - - The GtkHBox and GtkVBox APIs have been deprecated by now. - - src/eog-close-confirmation-dialog.c | 10 +++++----- - src/eog-error-message-area.c | 4 ++-- - src/eog-file-chooser.c | 2 +- - src/eog-print-image-setup.c | 2 +- - src/eog-sidebar.c | 4 ++-- - src/eog-statusbar.c | 2 +- - src/eog-window.c | 17 +++++++++-------- - 7 files changed, 21 insertions(+), 20 deletions(-) - -commit ada6e43cc97f34298aac8d58e3501c66441edc57 -Author: Diego Escalante Urrelo -Date: Fri Oct 7 23:46:04 2011 +0000 - - toolbareditor: use GtkBox instead of H/V versions - - Bug #661240 - - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 8 +++++--- - cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 4 ++-- - cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 6 ++++-- - cut-n-paste/toolbar-editor/egg-toolbar-editor.h | 4 ++-- - 4 files changed, 13 insertions(+), 9 deletions(-) - -commit 1a382d8fcfe3021895d5024d19f45985b442ad8d -Author: Diego Escalante Urrelo -Date: Fri Oct 7 23:34:22 2011 +0000 - - toolbareditor: use GtkGrid instead of GtkTable - - Bug #661240 - - cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 42 ++++++++++++------------- - 1 file changed, 21 insertions(+), 21 deletions(-) - -commit 8fd4bf392f5596a509b7183e1a7e8dceb3935808 -Author: Diego Escalante Urrelo -Date: Fri Oct 7 23:33:44 2011 +0000 - - toolbareditor: use GtkSeparator instead of GtkHSeparator - - Bug #661240 - - cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 9dfcd2aaebec4ef9255b9c524a62e081fa7e3522 -Author: Felix Riemann -Date: Mon Nov 21 22:24:36 2011 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit e34962fdb60fead082e2cd75959c991e3326a4eb -Author: Felix Riemann -Date: Mon Nov 21 22:18:42 2011 +0100 - - Prepare for release 3.3.2 - - NEWS | 46 ++++++++++++++++++++++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 47 insertions(+), 1 deletion(-) - -commit 51ae2b54f2c2b8b20cfc0f2a7fe215f625baea29 -Author: Felix Riemann -Date: Mon Nov 21 21:58:10 2011 +0100 - - Raise minimum glib dependency to 2.31.0 - - Commit ee4f6b27 could cause trouble with older versions. - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 069f35caa1fc796dd0d3f8a786d730f317128156 -Author: Paul Seyfert -Date: Sat Nov 19 21:39:37 2011 +0100 - - [l10n] Updated German translation - - po/de.po | 355 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 183 insertions(+), 172 deletions(-) - -commit 282c53cbfa075276fa2ce578dbabfd9e6cd502ee -Author: Stas Solovey -Date: Tue Nov 15 00:39:35 2011 +0400 - - Updated Russian translation - - po/ru.po | 352 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 177 insertions(+), 175 deletions(-) - -commit c8ae8a4e87b9f7322d0d08ceb88f1a232138882e -Author: Daniel Mustieles -Date: Mon Nov 14 18:18:16 2011 +0100 - - Updated Spanish translation - - help/es/es.po | 70 +++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 46 insertions(+), 24 deletions(-) - -commit ab5b7261775ebee02512594b197eb1cf107d0cbc -Author: Thura Hlaing -Date: Mon Nov 14 22:21:15 2011 +0700 - - Added Burmese translation. - - po/LINGUAS | 1 + - po/my.po | 1455 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1456 insertions(+) - -commit 34aa279c5e113a77645837a930370b405dae65f1 -Author: Tiffany Antopolski -Date: Mon Nov 14 00:24:35 2011 -0500 - - [documentation] Clarified wording about slideshow control. - - This fixes bug #661325. - - help/C/slideshow.page | 5 ++--- - 1 file changed, 2 insertions(+), 3 deletions(-) - -commit 3456c0dff2279114010f085cd2ecf08fe5b9d500 -Author: Fran Diéguez -Date: Sun Nov 13 22:58:15 2011 +0100 - - Updated Galician translations - - po/gl.po | 32 +++++++++++++++++++------------- - 1 file changed, 19 insertions(+), 13 deletions(-) - -commit 7c38ce7efc98a0571e299402e2e040f83c9498af -Author: Tiffany Antopolski -Date: Sat Nov 12 16:14:40 2011 -0500 - - [documentation] Fixed reference to link in bug-filing.page. - - help/C/bug-filing.page | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - -commit e7416ca6fc711b1e0a0414a8f5444ffc2cce87c4 -Author: Daniel Mustieles -Date: Wed Nov 9 19:36:09 2011 +0100 - - Updated Spanish translation - - help/es/es.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit a114558db8257bbdb81ff63caa28fe92e5e38a33 -Author: Hideki Yamane -Date: Tue Nov 8 01:36:54 2011 +0900 - - Updated Japanese translation - - po/ja.po | 440 +++++++++++++++++++++++++-------------------------------------- - 1 file changed, 172 insertions(+), 268 deletions(-) - -commit ee4f6b27027421ee1e7cb14948f587da83171668 -Author: Ryan Lortie -Date: Wed Nov 2 10:08:14 2011 -0400 - - Don't lock GDK around g_application_run() - - An unintended interaction between GtkApplication and GDK threading made - this necessary before. That code has since been simplified, breaking - this formerly-working code. - - https://bugzilla.gnome.org/show_bug.cgi?id=662630 - - src/main.c | 4 ---- - 1 file changed, 4 deletions(-) - -commit f63d786e8334a78fb1b2d7c514367d8306a8e448 -Author: Andiswa Mvanyashe -Date: Mon Oct 31 22:56:25 2011 +0200 - - Updated translation for Xhosa (xh) - - po/xh.po | 1906 ++++++++++++++++++++++++++++++++++++++++++++++---------------- - 1 file changed, 1407 insertions(+), 499 deletions(-) - -commit 4626596c2c179bfe35c4212efced15c38d7337d6 -Author: Javier Sánchez -Date: Sun Oct 16 13:55:09 2011 +0200 - - Fixed Bug 653065 - On edit of image, permissions changed. - - - Try to restore file UID, GID, and MODE attributes from original - image file to temp image file, before replace it. - - https://bugzilla.gnome.org/show_bug.cgi?id=653065 - - src/eog-image.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - src/eog-jobs.c | 27 -------------- - 2 files changed, 108 insertions(+), 27 deletions(-) - -commit 2baaacb90a45fd00e6fde08909446834a5a138ec -Author: Gabor Kelemen -Date: Thu Oct 27 19:59:56 2011 +0200 - - Some error fixes in the Hungarian help translation - - help/hu/hu.po | 18 ++++++++---------- - 1 file changed, 8 insertions(+), 10 deletions(-) - -commit 278ce22f71ddad955398339ad6d5b7160c38f467 -Author: Gabor Kelemen -Date: Tue Oct 25 02:11:32 2011 +0200 - - Updated Hungarian help translation - - help/hu/hu.po | 91 ++++++++++++++++++++++------------------------------------- - 1 file changed, 34 insertions(+), 57 deletions(-) - -commit fc3ab8c8782b96cd5855da62df05e63840d263a1 -Author: Ihar Hrachyshka -Date: Mon Oct 24 00:53:24 2011 +0300 - - Updated Belarusian translation. - - po/be.po | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - -commit 83c5c27777a1326c3ca3131bd430f2551c2ae599 -Author: Yaron Shahrabani -Date: Sat Oct 22 12:13:10 2011 +0200 - - Updated Hebrew translation. - - po/he.po | 520 +++++++++++++++++++++++++++------------------------------------ - 1 file changed, 225 insertions(+), 295 deletions(-) - -commit 631213f7421c9ecf999812239f3d9e13e0bfa8d9 -Author: Matej Urbančič -Date: Fri Oct 21 21:21:00 2011 +0200 - - Updated Slovenian translation - - po/sl.po | 26 +++++++++++++++----------- - 1 file changed, 15 insertions(+), 11 deletions(-) - -commit e01ddddb08295171ea94e1a86d6293ec971c59fb -Author: Ihar Hrachyshka -Date: Thu Oct 20 22:42:40 2011 +0300 - - Updated Belarusian translation. - - po/be.po | 299 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 154 insertions(+), 145 deletions(-) - -commit 38e946d13571a7bd200b4aadde3715f24f692c54 -Author: Felix Riemann -Date: Thu Oct 20 11:55:27 2011 +0200 - - Have automake generate XZ-compressed tarballs on dist - - The GNOME FTPs will make it the only compression format for TARs soon. - This raises the minimum automake version to 1.11. - - autogen.sh | 2 +- - configure.ac | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit 307d5b4f4fca2e0af4016b6e5bf87403c16cae88 -Author: Bruno Brouard -Date: Mon Oct 17 16:11:22 2011 +0200 - - Updated French doc translation - - .../{mutiple-rename-count.png => multiple-rename-count.png} | Bin - 1 file changed, 0 insertions(+), 0 deletions(-) - -commit 5e7846815212d980a5b7547bd71d249be1eeea7d -Author: Bruno Brouard -Date: Mon Oct 17 16:07:08 2011 +0200 - - Updated French doc translation - - help/fr/figures/eog-toolbar-editor.png | Bin 0 -> 35696 bytes - help/fr/figures/image-view-prefs.png | Bin 0 -> 36667 bytes - help/fr/figures/multiple-convert.png | Bin 0 -> 37895 bytes - help/fr/figures/mutiple-rename-count.png | Bin 0 -> 39787 bytes - help/fr/figures/plugin-send-by-mail.png | Bin 0 -> 64851 bytes - help/fr/figures/plugin-tools-flickr.png | Bin 0 -> 66554 bytes - help/fr/figures/plugins-all.png | Bin 0 -> 84146 bytes - help/fr/figures/prefs-plugins-date.png | Bin 0 -> 31183 bytes - help/fr/figures/prefs-plugins-fullscreen.png | Bin 0 -> 31169 bytes - help/fr/figures/prefs-plugins.png | Bin 0 -> 30888 bytes - help/fr/figures/slideshow-prefs.png | Bin 0 -> 23955 bytes - help/fr/fr.po | 21 +++++++++++++++++++-- - 12 files changed, 19 insertions(+), 2 deletions(-) - -commit 8c843190f0bcc775db8e196f17e8c9348fbe4436 -Author: Nguyễn Thái Ngọc Duy -Date: Mon Oct 17 19:43:12 2011 +1100 - - Updated Vietnamese translation - - po/vi.po | 61 ++++++++++++++++++++++++------------------------------------- - 1 file changed, 24 insertions(+), 37 deletions(-) - -commit 7a8cdc2b6cd217452e3885a2b70c80442f68f5d3 -Author: Nguyễn Thái Ngọc Duy -Date: Mon Oct 17 19:38:08 2011 +1100 - - po/vi: import from Damned Lies - - po/vi.po | 491 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 284 insertions(+), 207 deletions(-) - -commit 5c3b3fe08a33a55f7bcfc567e0f5c871bd2f7480 -Author: Bruno Brouard -Date: Sun Oct 16 21:59:55 2011 +0200 - - Updated French doc translation - - help/fr/figures/eog_save_as_window.png | Bin 32443 -> 0 bytes - help/fr/figures/eog_start_window.png | Bin 18290 -> 0 bytes - help/fr/figures/eog_toolbar_editor_window.png | Bin 27099 -> 0 bytes - help/fr/fr.po | 2749 +++++++++++++------------ - 4 files changed, 1482 insertions(+), 1267 deletions(-) - -commit 329f667d47bb43650e7eb790c1585bfb1b068133 -Author: krishnababu k -Date: Fri Oct 14 14:07:31 2011 +0530 - - Updated Telugu Translations - - po/te.po | 549 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 301 insertions(+), 248 deletions(-) - -commit 7f89e5d2c52117f976b645303f8b77428df91671 -Author: Kjartan Maraas -Date: Thu Oct 13 15:31:26 2011 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 303 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 157 insertions(+), 146 deletions(-) - -commit e51fe5841cc17c5d0686442e90e770be2f52374e -Author: Felix Riemann -Date: Wed Oct 12 14:40:43 2011 +0200 - - Fix some introspection annotations - - There were element-type annotations for list parameters of - several functions. - - src/eog-application.c | 4 ++-- - src/eog-image.c | 2 +- - src/eog-list-store.c | 4 ++-- - src/eog-window.c | 2 +- - 4 files changed, 6 insertions(+), 6 deletions(-) - -commit bb59f929900d9e70f8b62944334e37f610deb7a6 -Author: Gabor Kelemen -Date: Tue Oct 11 22:19:17 2011 +0200 - - Updated Hungarian translation - - help/hu/hu.po | 2669 ++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 1684 insertions(+), 985 deletions(-) - -commit e60a793973f8579513b4eb0f46258a024e868150 -Author: krishnababu k -Date: Mon Oct 10 16:59:11 2011 +0530 - - Updated Telugu Translations - - po/te.po | 397 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 213 insertions(+), 184 deletions(-) - -commit dae6a35af8029deed58c3a58f96dca34dfc1faac -Author: Muhammet Kara -Date: Mon Oct 10 09:34:17 2011 +0300 - - Updated Turkish translation - - po/tr.po | 314 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 157 insertions(+), 157 deletions(-) - -commit 097f37cb7848f204ab89e75b735d48501637fc0c -Author: Daniel Mustieles -Date: Sun Oct 9 11:48:32 2011 +0200 - - Updated Spanish translation - - po/es.po | 28 +++++++++++++++++----------- - 1 file changed, 17 insertions(+), 11 deletions(-) - -commit 46c8fca7f44a2854bdc9bb3e727d6ecc30342f53 -Author: Algimantas Margevičius -Date: Sun Oct 9 00:25:08 2011 +0300 - - Updated Lithuanian translation - - po/lt.po | 349 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 172 insertions(+), 177 deletions(-) - -commit 1703a45f02a3db567935622e21716a8a1a8d75ea -Author: Andrej Žnidaršič -Date: Sat Oct 8 14:32:34 2011 +0200 - - Updated Slovenian translation - - help/sl/sl.po | 2366 +++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 1470 insertions(+), 896 deletions(-) - -commit 45ed40ecb15a1db97ad34752a237d187b2aec34c -Author: Michael Wünsch -Date: Thu Oct 6 17:56:16 2011 +0200 - - Allow reusing an existing window for another image from the commandline - - Reuses an existing window instead of opening a new one. - For now this is only supported from the commandline. - - https://bugzilla.gnome.org/show_bug.cgi?id=617735 - - src/eog-application.c | 40 +++++++++++++++++++++++++++++++++++----- - src/eog-window.h | 3 ++- - src/main.c | 5 +++++ - 3 files changed, 42 insertions(+), 6 deletions(-) - -commit 45d1e2d462d8045ada32005bf36d2e78536b4ed8 -Author: Daniel Mustieles -Date: Fri Oct 7 10:52:37 2011 +0200 - - Updated Spanish translation - - po/es.po | 281 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 143 insertions(+), 138 deletions(-) - -commit 9efdbdc67844b59b82e377874c7dde80c4ea84b1 -Author: Matej Urbančič -Date: Tue Oct 4 20:28:24 2011 +0200 - - Updated Slovenian translation - - po/sl.po | 321 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 159 insertions(+), 162 deletions(-) - -commit a627661d0bdb518adb31c76261ddaa0342d25496 -Author: Fran Dieguez -Date: Tue Oct 4 11:22:42 2011 +0200 - - Updated Galician translations - - po/gl.po | 280 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 142 insertions(+), 138 deletions(-) - -commit 81acc92c57f6713b4fb494c0c789ac3ec17adaed -Author: Felix Riemann -Date: Mon Oct 3 23:01:50 2011 +0200 - - Make the URI-label in the properties dialog a button showing the folder - - This should avoid the label being cut-off while still being informative - enough. Clicking the button opens the folder in the file manager. - - https://bugzilla.gnome.org/show_bug.cgi?id=614869 - - data/eog-image-properties-dialog.ui | 509 +++++++++++++++++++++--------------- - src/eog-properties-dialog.c | 54 +++- - 2 files changed, 344 insertions(+), 219 deletions(-) - -commit e83787ad630df42e98ded11ed05a0377590f078b -Author: Felix Riemann -Date: Fri Sep 23 20:58:20 2011 +0200 - - Reduce vertical borders of progressbar in statusbar to avoid redraws - - Otherwise the progressbar causes the statusbar to enlarge which will - trigger a redraw of the already shown picture. - - https://bugzilla.gnome.org/show_bug.cgi?id=655205 - - src/eog-statusbar.c | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - -commit 3764db24f7d5e570b39894a05ba71a09012eea24 -Author: Felix Riemann -Date: Fri Sep 30 20:30:16 2011 +0200 - - Auto-reload unmodified images when their file is changed - - It makes sense to skip the user confirmation in this case as there are - no unsaved changed that could get lost. - - https://bugzilla.gnome.org/show_bug.cgi?id=555370 - - src/eog-window.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -commit 7184c444a508db135e85aae8b2041fb85ea8f163 -Author: Felix Riemann -Date: Mon Oct 3 23:07:22 2011 +0200 - - Post-branch version bump - - Show the "instability" of this branch again. - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit abe2d406d61a40073b6d8f8cfa3ae5cedf451c0f -Author: Felix Riemann -Date: Fri Sep 30 23:26:44 2011 +0200 - - Revert "Remove unneeded static variable" - - This reverts commit d90c385f06fc57837bbfe39e7f8b6084eccaace9. - - Let's keep it how it's done in the GObject manual for now. - - src/eog-window-activatable.c | 33 +++++++++++++++++++-------------- - 1 file changed, 19 insertions(+), 14 deletions(-) - -commit d90c385f06fc57837bbfe39e7f8b6084eccaace9 -Author: Felix Riemann -Date: Fri Sep 30 22:54:01 2011 +0200 - - Remove unneeded static variable - - An interface's default_init function doesn't need to be secured against - multiple calls as it actually behaves similar to a class_init function. - - src/eog-window-activatable.c | 33 ++++++++++++++------------------- - 1 file changed, 14 insertions(+), 19 deletions(-) - -commit e1b7eab94758487986dcfcaceeca5d6114e9a350 -Author: Daniel Korostil -Date: Wed Sep 28 02:33:04 2011 +0300 - - Uploaded Ukranian - - po/uk.po | 460 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 255 insertions(+), 205 deletions(-) - -commit 8c499a36b7f2ce8bb8dfec5e681c0bf58a7dd1f7 -Author: Felix Riemann -Date: Mon Sep 26 22:16:21 2011 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 6c7c8635b0b5dc5919b64e423dce835e9f6a7c17 -Author: Felix Riemann -Date: Mon Sep 26 22:11:16 2011 +0200 - - Prepare for release 3.2.0 - - NEWS | 25 +++++++++++++++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 27 insertions(+), 2 deletions(-) - -commit 9d62d3e7212ce5812f1ec9f40fb8696eeff37275 -Author: Carles Ferrando -Date: Mon Sep 26 14:22:40 2011 +0200 - - [l10n]Updated Catalan (Valencian) translation - - po/ca@valencia.po | 473 +++++++++++++++++++++++++++++------------------------- - 1 file changed, 254 insertions(+), 219 deletions(-) - -commit 34733b2c932bde0f8fa67bef7aa00d351638b994 -Author: Friedel Wolff -Date: Mon Sep 26 10:16:32 2011 +0200 - - Updated translation for Afrikaans (af) - - po/af.po | 947 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 464 insertions(+), 483 deletions(-) - -commit 0424bb84435f53da77c5398af4f1acd8e7d47515 -Author: Yasumichi Akahoshi -Date: Mon Sep 26 06:29:06 2011 +0900 - - Updated Japanese translation - - help/ja/figures/eog-toolbar-editor.png | Bin 0 -> 12107 bytes - help/ja/figures/eog_save_as_window.png | Bin 14080 -> 0 bytes - help/ja/figures/eog_start_window.png | Bin 7912 -> 0 bytes - help/ja/figures/eog_toolbar_editor_window.png | Bin 12420 -> 0 bytes - help/ja/figures/image-view-prefs.png | Bin 0 -> 13871 bytes - help/ja/figures/multiple-convert.png | Bin 0 -> 12553 bytes - help/ja/figures/multiple-rename-count.png | Bin 0 -> 13359 bytes - help/ja/figures/plugin-send-by-mail.png | Bin 0 -> 22025 bytes - help/ja/figures/plugin-tools-flickr.png | Bin 0 -> 21927 bytes - help/ja/figures/plugins-all.png | Bin 0 -> 25758 bytes - help/ja/figures/prefs-plugins-date.png | Bin 0 -> 14016 bytes - help/ja/figures/prefs-plugins-fullscreen.png | Bin 0 -> 13681 bytes - help/ja/figures/prefs-plugins.png | Bin 0 -> 13173 bytes - help/ja/figures/slideshow-prefs.png | Bin 0 -> 10748 bytes - help/ja/ja.po | 3625 ++++++++++++++----------- - 15 files changed, 2083 insertions(+), 1542 deletions(-) - -commit 08fa7dd549bd04f20bfe8b0b624d57960f3aaecc -Author: Laura Balbastre -Date: Sun Sep 25 23:20:16 2011 +0200 - - [l10n]Updated Catalan translation - - po/ca.po | 466 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 257 insertions(+), 209 deletions(-) - -commit fb509925e6f7616c888f63f40d148f80768ee2a9 -Author: Changwoo Ryu -Date: Mon Sep 26 05:26:33 2011 +0900 - - Updated Korean translation - - help/ko/ko.po | 2989 ++++++++++++++++++++++++++++++++------------------------- - po/ko.po | 8 +- - 2 files changed, 1684 insertions(+), 1313 deletions(-) - -commit 70d2c490b72bb8ea96aa4db972ef048b27d889f9 -Author: Yasumichi Akahoshi -Date: Mon Sep 26 00:27:26 2011 +0900 - - Updated Japanese translation - - po/ja.po | 534 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 294 insertions(+), 240 deletions(-) - -commit 73f5bb7418c1763c03bde99a5382f83999bb7467 -Author: Piotr Drąg -Date: Sun Sep 25 12:45:42 2011 +0200 - - Updated Polish translation - - po/pl.po | 20 ++++++++++---------- - 1 file changed, 10 insertions(+), 10 deletions(-) - -commit 376e09483ce92adcaa49a3bf1211c4df7a27266e -Author: Inaki Larranaga Murgoitio -Date: Fri Sep 23 17:34:13 2011 +0200 - - Updated Basque language - - po/eu.po | 519 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 290 insertions(+), 229 deletions(-) - -commit 452fd6650f73e5969934f32bb8a55ca9440ef164 -Author: Sweta Kothari -Date: Fri Sep 23 14:41:14 2011 +0530 - - Updated Gujarati Translations - - po/gu.po | 568 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 305 insertions(+), 263 deletions(-) - -commit 3179fb14c0107961c04097262b0c75e9c42314b9 -Author: Tommi Vainikainen -Date: Fri Sep 23 11:18:57 2011 +0300 - - Updated Finnish translation - - po/fi.po | 48 ++++++++++++++++-------------------------------- - 1 file changed, 16 insertions(+), 32 deletions(-) - -commit 2fc357ba99532157324395c54e4ee0b2b8496548 -Author: Nilamdyuti Goswami -Date: Thu Sep 22 12:14:21 2011 +0200 - - Update Assamese translation - - po/as.po | 1086 +++++++++++++++++++++++++++----------------------------------- - 1 file changed, 469 insertions(+), 617 deletions(-) - -commit c5c88193845448ebc7ae21b679dd5eb7d045b222 -Author: Michal Štrba -Date: Wed Sep 21 21:21:00 2011 +0200 - - Updated Slovak translation - - po/sk.po | 525 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 249 insertions(+), 276 deletions(-) - -commit d52f76fb5eac32c30b6197c91c4946ab98a2afe1 -Author: Gianvito Cavasoli -Date: Wed Sep 21 19:50:43 2011 +0200 - - [1l0n] Updated Italian translation - - po/it.po | 505 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 272 insertions(+), 233 deletions(-) - -commit 59f14d10edc5bfc7a4ca9bba0dc7c2c5a9149ca7 -Author: Gabor Kelemen -Date: Wed Sep 21 02:38:10 2011 +0200 - - Updated Hungarian translation - - po/hu.po | 318 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 162 insertions(+), 156 deletions(-) - -commit 2087f4fa4a566709849d4fbf640581c66d580a65 -Author: Ernest Mashele -Date: Tue Sep 20 17:44:40 2011 +0200 - - Updated Tsonga translation - - po/ts.po | 310 ++++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 196 insertions(+), 114 deletions(-) - -commit 8a5576cc08ca4932cb56b133385d2bba1497de31 -Author: Fran Dieguez -Date: Tue Sep 20 11:00:59 2011 +0200 - - Updated Galician translations - - help/Makefile.am | 2 +- - help/gl/gl.po | 2144 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 2145 insertions(+), 1 deletion(-) - -commit cd8edeeab271e070719ca34f8b6c1723f7a52c3f -Author: Felix Riemann -Date: Mon Sep 19 22:15:44 2011 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 09ca56be923f91c8e9d5fe65e6769fd723915309 -Author: Felix Riemann -Date: Mon Sep 19 22:10:01 2011 +0200 - - Prepare for release 3.1.92 - - NEWS | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 49 insertions(+) - -commit 2c4fd0a781704d2de5bb2a545adad5950395f95b -Author: Felix Riemann -Date: Mon Sep 19 21:50:45 2011 +0200 - - [reload] Drop forgotten debug printf - - plugins/reload/eog-reload-plugin.c | 1 - - 1 file changed, 1 deletion(-) - -commit 4107d1ab548a0976ef2846a316c677e50479c592 -Author: Felix Riemann -Date: Mon Sep 19 21:47:30 2011 +0200 - - [l10n] Fix translator credit markup - - "Unbreak" about dialog. - - po/de.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit f9ea1ab6f252ef48e0f120fbf233ca4ef48f636f -Author: Ernest Mashele -Date: Mon Sep 19 20:09:16 2011 +0200 - - Added Tsonga translation - - po/LINGUAS | 1 + - po/ts.po | 1459 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1460 insertions(+) - -commit af6f776ff616e6632a7dbf8cdab35c023e6658dc -Author: Muhammet Kara -Date: Sun Sep 18 21:44:00 2011 +0300 - - Updated Turkish translation - - po/tr.po | 450 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 250 insertions(+), 200 deletions(-) - -commit 30f5aad9892a0cae728b098e6c25059a07ca0f85 -Author: Ihar Hrachyshka -Date: Sun Sep 18 15:54:15 2011 +0300 - - Updated Belarusian translation (some fixes after manual testing). - - po/be.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit 1f15c866e49e1435d0670eb34484030524171653 -Author: Mario Blättermann -Date: Sun Sep 18 13:38:12 2011 +0200 - - [l10n] Updated German translation - - po/de.po | 435 +++++++++++++++++++++++---------------------------------------- - 1 file changed, 155 insertions(+), 280 deletions(-) - -commit c42d2252746d87176c278a5c04198b9eeb9eb8c2 -Author: Kenneth Nielsen -Date: Sun Sep 18 13:18:20 2011 +0200 - - Updated Danish translation - - po/da.po | 482 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 267 insertions(+), 215 deletions(-) - -commit 8ac076651a6e1515885a8b5d82587f49f39a7318 -Author: Alexander Shopov -Date: Sun Sep 18 10:54:34 2011 +0300 - - Updated Bulgarian translation - - po/bg.po | 78 +++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 40 insertions(+), 38 deletions(-) - -commit b229d8355af80a0eed5fd26f14aa5a715bfdb1ec -Author: Tiffany Antopolski -Date: Sun Sep 18 06:45:49 2011 +0200 - - Updated Esperanto translation - - po/eo.po | 35 ++++++++++++++++++----------------- - 1 file changed, 18 insertions(+), 17 deletions(-) - -commit 39a26563b944f89a5fdbcdef1fb3d19b5bcd4ee2 -Author: A S Alam -Date: Sun Sep 18 00:54:06 2011 +0530 - - update Punjabi Translation - - po/pa.po | 329 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 169 insertions(+), 160 deletions(-) - -commit e2ff1a089a3a1f2eee0b9aa5b210baf6a77ed65d -Author: Matej Urbančič -Date: Sat Sep 17 10:53:24 2011 +0200 - - Updated Slovenian translation - - po/sl.po | 5 ++--- - 1 file changed, 2 insertions(+), 3 deletions(-) - -commit 726fbe1196fd1ec335366bce0a5bc6687d1dd1fb -Author: Theppitak Karoonboonyanan -Date: Sat Sep 17 14:02:36 2011 +0700 - - Updated Thai translation. - - po/th.po | 308 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 154 insertions(+), 154 deletions(-) - -commit 581cad8d8311d568bf68c8d37171a393a716fb17 -Author: Мирослав Николић -Date: Sat Sep 17 00:12:32 2011 +0200 - - Updated Serbian translation - - po/sr.po | 794 +++++++++++++++++++++++++++++++-------------------------- - po/sr@latin.po | 794 +++++++++++++++++++++++++++++++-------------------------- - 2 files changed, 854 insertions(+), 734 deletions(-) - -commit 3d50ecd355acd947704dde465de51b383ccc6d25 -Author: Antonio Fernandes C. Neto -Date: Fri Sep 16 09:13:18 2011 -0300 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 45 ++++++++++++++++++++++++--------------------- - 1 file changed, 24 insertions(+), 21 deletions(-) - -commit fbc53fedb15eda22dcc522ed6dbcd7bdb6f7d9b6 -Author: Vincent Untz -Date: Wed Sep 14 22:37:57 2011 +0200 - - build: Update list of doc figures - - https://bugzilla.gnome.org/show_bug.cgi?id=659093 - - help/Makefile.am | 8 ++------ - 1 file changed, 2 insertions(+), 6 deletions(-) - -commit a9eebfbac55ff90cb8f53ef19cfe61afe91557ae -Author: Martin Srebotnjak -Date: Thu Sep 15 22:34:00 2011 +0200 - - Updated Slovenian translation - - po/sl.po | 460 ++++++++++++++++++++++++++------------------------------------- - 1 file changed, 187 insertions(+), 273 deletions(-) - -commit b84331d348a71b6d8c135b88972a5f225ff2216d -Author: dmustieles -Date: Wed Sep 14 17:09:35 2011 +0200 - - Updated Spanish translation - - po/es.po | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - -commit 7014474af8e571241b43634ca34849f6a177feee -Author: Xandru Armesto -Date: Wed Sep 14 16:43:12 2011 +0200 - - Updated asturian translation - - po/ast.po | 983 ++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 544 insertions(+), 439 deletions(-) - -commit 9e06e208d734824dd6ad8bc50c7930602f1c4c86 -Author: Dr.T.Vasudevan -Date: Tue Sep 13 14:31:29 2011 +0530 - - updated Tamil translation - - po/ta.po | 481 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 269 insertions(+), 212 deletions(-) - -commit b62b18f6b89c9fdcde6e2c0d94c5d32889042c3c -Author: YunQiang Su -Date: Tue Sep 13 11:16:27 2011 +0800 - - update Simplified Chinese(zh_CN) translation - - po/zh_CN.po | 316 +++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 161 insertions(+), 155 deletions(-) - -commit 8bf3189167eadb8965e22690a9ef3716c28243cf -Author: Changwoo Ryu -Date: Tue Sep 13 08:51:47 2011 +0900 - - Updated Korean translation - - po/ko.po | 477 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 266 insertions(+), 211 deletions(-) - -commit 316f925f92c4b82e6d1affd8a056b5d4c568ef99 -Author: Bruno Brouard -Date: Mon Sep 12 21:18:09 2011 +0200 - - Updated French translation - - po/fr.po | 50 +++++++++++++++++++++++--------------------------- - 1 file changed, 23 insertions(+), 27 deletions(-) - -commit dc7d8f9ddacd0594f4d84c5561c1ca2119212eed -Author: Daniel Nylander -Date: Mon Sep 12 20:35:00 2011 +0200 - - Updated Swedish translation - - po/sv.po | 559 ++++++++++++++++++++------------------------------------------- - 1 file changed, 174 insertions(+), 385 deletions(-) - -commit 8ebaf9ca0abb6d5af904cee1ee500a559c69096d -Author: Rudolfs Mazurs -Date: Mon Sep 12 00:37:17 2011 +0300 - - Updated Latvian translation. - - po/lv.po | 447 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 248 insertions(+), 199 deletions(-) - -commit 16f1cd725905acb19366a7d8d06c10653ecafb9a -Author: Daniel Mustieles -Date: Sun Sep 11 17:36:17 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 12 +++--------- - 1 file changed, 3 insertions(+), 9 deletions(-) - -commit f8a3a604d2d1258405a99482ef884986c66bb2b0 -Author: Jorge González -Date: Sun Sep 11 11:10:04 2011 +0200 - - Updated Spanish translation - - po/es.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit 05b39882fcbeb8a69849834b0d9f5090a2db07b8 -Author: Kristjan SCHMIDT -Date: Sun Sep 11 08:21:59 2011 +0200 - - Updated Esperanto translation - - po/eo.po | 715 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 396 insertions(+), 319 deletions(-) - -commit cfe0221a7d53c921522ffaddc603f6a26d40f2d7 -Author: Mario Blättermann -Date: Sun Sep 11 01:42:22 2011 +0200 - - [l10n] Updated German doc translation - - help/de/de.po | 473 ++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 308 insertions(+), 165 deletions(-) - -commit f1b4dd066c8cd35a708bbc6229da19c74e3c4c3d -Author: Jorge González -Date: Sat Sep 10 16:57:45 2011 +0200 - - Updated Spanish translation - - help/es/figures/plugins-all.png | Bin 0 -> 64341 bytes - help/es/figures/prefs-plugins-date.png | Bin 0 -> 34189 bytes - 2 files changed, 0 insertions(+), 0 deletions(-) - -commit 60f589e60833eb3696fbdbba2f5489fd0c9226fb -Author: Jorge González -Date: Sat Sep 10 16:57:19 2011 +0200 - - Updated Spanish translation - - help/es/figures/eog-toolbar-editor.png | Bin 28877 -> 27337 bytes - 1 file changed, 0 insertions(+), 0 deletions(-) - -commit 3a4e301caf0d353bd82477733f0d586ee1cc0e56 -Author: Jorge González -Date: Sat Sep 10 16:51:09 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 196 ++------------------------ - help/es/figures/eog-toolbar-editor.png | Bin 0 -> 28877 bytes - help/es/figures/eog_save_as_window.png | Bin 30227 -> 0 bytes - help/es/figures/eog_start_window.png | Bin 19224 -> 0 bytes - help/es/figures/eog_toolbar_editor_window.png | Bin 25391 -> 0 bytes - help/es/figures/image-view-prefs.png | Bin 0 -> 32334 bytes - help/es/figures/plugin-send-by-mail.png | Bin 0 -> 21128 bytes - help/es/figures/plugin-tools-flickr.png | Bin 0 -> 21115 bytes - help/es/figures/prefs-plugins-fullscreen.png | Bin 0 -> 34176 bytes - help/es/figures/prefs-plugins.png | Bin 0 -> 32484 bytes - help/es/figures/slideshow-prefs.png | Bin 0 -> 23341 bytes - 11 files changed, 9 insertions(+), 187 deletions(-) - -commit 986be394c03c0c92cfc6b220f034e389face0d13 -Author: Jorge González -Date: Sat Sep 10 16:21:57 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 167 ++++++++++++++++++++++++++++++++++++++-------------------- - po/es.po | 13 ++--- - 2 files changed, 113 insertions(+), 67 deletions(-) - -commit a1e9829cfdb92292a415a764a397f6ffdf44fe21 -Author: Jorge González -Date: Sat Sep 10 16:21:36 2011 +0200 - - Fixed one string - - help/C/format-change.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ddb54a8a6e683c34cf715b2312a798bc2bd50fa2 -Author: Jorge González -Date: Sat Sep 10 14:06:20 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 19 ++++++++++++++++++- - 1 file changed, 18 insertions(+), 1 deletion(-) - -commit ffd30be64266f4f4fe20c22f3ffbd9cb61035d24 -Author: Jorge González -Date: Sat Sep 10 12:02:30 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 105 +++++++++++++++++++++++++--------------------------------- - 1 file changed, 46 insertions(+), 59 deletions(-) - -commit d3c3036b121ba709bcc812e4c69af046ade222bf -Author: Chao-Hsiung Liao -Date: Sat Sep 10 14:56:10 2011 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 64 ++++++++++++++++++++++--------------------------------------- - po/zh_TW.po | 64 ++++++++++++++++++++++--------------------------------------- - 2 files changed, 46 insertions(+), 82 deletions(-) - -commit 4321e128d8fef5e04fcd7bac9e981be4ac7e3b56 -Author: Og B. Maciel -Date: Fri Sep 9 08:51:47 2011 -0400 - - Updated timestamp on revision date to see if that makes DL happier. - - po/pt_BR.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c988febf0e86aa845c956319a5ba57af2562fb79 -Author: Antonio Fernandes C. Neto -Date: Fri Sep 9 08:41:51 2011 -0400 - - Updated Brazilian Portuguese translation. - - po/pt_BR.po | 66 ++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 35 insertions(+), 31 deletions(-) - -commit 816583ec778063f2aa79d82738c458463a1ec9c4 -Author: Yaron Shahrabani -Date: Fri Sep 9 13:17:04 2011 +0300 - - Updated Hebrew translation. - - po/he.po | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - -commit 0122d4db60b38ec2a7d064cdc993f37dceebb12b -Author: Yaron Shahrabani -Date: Fri Sep 9 13:16:05 2011 +0300 - - Updated Hebrew translation. - - po/he.po | 313 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 160 insertions(+), 153 deletions(-) - -commit 28f6a5cdce2383fb4c58b412c92c7f91b4e26205 -Author: Claudio Saavedra -Date: Fri Sep 9 08:45:42 2011 +0300 - - Enable maintainer-mode by default - - To make desrt happy - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8a6991ab1d1652b2b592f18b3bd8bacc282c6b68 -Author: Piotr Drąg -Date: Thu Sep 8 21:13:26 2011 +0200 - - Updated Polish translation - - po/pl.po | 454 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 246 insertions(+), 208 deletions(-) - -commit f7f568400b3d632330df652f3f76eaedbc9bf9de -Author: Bruce Cowan -Date: Thu Sep 8 16:35:45 2011 +0100 - - Updated British English translation - - po/en_GB.po | 477 +++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 265 insertions(+), 212 deletions(-) - -commit c0e451a2b99fc84a1e57676d50125a44396c4e60 -Author: Yuri Myasoedov -Date: Thu Sep 8 10:15:04 2011 +0400 - - Updated Russian translation - - po/ru.po | 560 +++++++++++++++++++++++++++------------------------------------ - 1 file changed, 238 insertions(+), 322 deletions(-) - -commit d0c73d266c363ab9994373d888bc37cd76230ce0 -Author: Andika Triwidada -Date: Thu Sep 8 13:11:34 2011 +0700 - - Updated Indonesian translation - - po/id.po | 372 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 179 insertions(+), 193 deletions(-) - -commit c796e7a58ec624593a7b1499fe7cde71fdf85bef -Author: Marek Černocký -Date: Thu Sep 8 08:08:28 2011 +0200 - - Updated Czech translation - - po/cs.po | 55 +++++++++++++++++++++++++++++-------------------------- - 1 file changed, 29 insertions(+), 26 deletions(-) - -commit e52bbca7472506fde6fab85d1557f96077576502 -Author: dmustieles -Date: Wed Sep 7 18:37:28 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 7d99670872543d0406e5f96d8802d4692f987710 -Author: Fran Dieguez -Date: Wed Sep 7 02:32:09 2011 +0200 - - Updated galician translations - - po/gl.po | 54 ++++++++++++++++++++++++++++-------------------------- - 1 file changed, 28 insertions(+), 26 deletions(-) - -commit c05fe36f1fc35ed471874b1d86e2950bdc9b9dc1 -Author: Duarte Loreto -Date: Wed Sep 7 00:38:08 2011 +0100 - - Updated Portuguese translation - - po/pt.po | 478 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 263 insertions(+), 215 deletions(-) - -commit a2c0cb2b4a1604b167e85379cd031b2d217c5408 -Author: Ihar Hrachyshka -Date: Wed Sep 7 01:42:50 2011 +0300 - - Updated Belarusian translation. - - po/be.po | 46 +++++++++++++++++++++------------------------- - 1 file changed, 21 insertions(+), 25 deletions(-) - -commit 09498dec180c0b21b9611e5b3a694348dc7a01cd -Author: Jorge González -Date: Tue Sep 6 22:25:14 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 98 ++++++++++++++++++++++++++++------------------------------- - 1 file changed, 47 insertions(+), 51 deletions(-) - -commit 9b6afdb4bec2b4f8dd86c9938f41e2c19563ddf2 -Author: Kjartan Maraas -Date: Tue Sep 6 21:54:44 2011 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 326 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 162 insertions(+), 164 deletions(-) - -commit 0ec193f55cd3dafc0031ad3492e0997abea73699 -Author: Aurimas Černius -Date: Tue Sep 6 22:43:47 2011 +0300 - - Updated Lithuanian translation - - po/lt.po | 556 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 328 insertions(+), 228 deletions(-) - -commit 84c2207e8dabf2f2fc7a40e016ea2102edb7c61c -Author: Mario Blättermann -Date: Tue Sep 6 21:45:06 2011 +0200 - - [l10n] Updated German doc translation - - help/de/de.po | 2975 +++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 1828 insertions(+), 1147 deletions(-) - -commit 0689f4fd4e6356b9dfd514514927e62cec4bacd8 -Author: Jorge González -Date: Tue Sep 6 20:39:37 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 51 +++++++++++++++++++++++++++------------------------ - 1 file changed, 27 insertions(+), 24 deletions(-) - -commit 41e25b719427e874acd5b873db412f0b471d2a54 -Author: Claudio Saavedra -Date: Tue Sep 6 12:51:27 2011 +0300 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b5c93640428128cb56dc210c12c4ac271b912a6f -Author: Claudio Saavedra -Date: Tue Sep 6 12:39:21 2011 +0300 - - Prepare for release 3.1.91 - - NEWS | 30 ++++++++++++++++++++++++++++++ - 1 file changed, 30 insertions(+) - -commit 2bb55b6f0ede9fc6d9939c156cef3e46b7fcb6ef -Author: Jorge González -Date: Tue Sep 6 11:02:03 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 142 +++++++++++++++++++--------------------------------------- - 1 file changed, 46 insertions(+), 96 deletions(-) - -commit b0f3e02e4ad8c25806cc18fd3c2519567d4692aa -Author: Arash Mousavi -Date: Tue Sep 6 12:18:56 2011 +0430 - - Updated Persian translation - - po/fa.po | 93 ++++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 52 insertions(+), 41 deletions(-) - -commit 3c80004909cd27d58532c7c6daa4f39ba3f062e2 -Author: Jorge González -Date: Tue Sep 6 06:06:43 2011 +0200 - - Updated Spanish translation - - po/es.po | 59 +++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 33 insertions(+), 26 deletions(-) - -commit 8159bdfcb279dcdb271e5d5ba259e7547d80a925 -Author: Jorge González -Date: Tue Sep 6 05:43:24 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 1729 ++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 1158 insertions(+), 571 deletions(-) - -commit 0240c070bd668c1e6310f5414786fdeee2196721 -Author: Phil Bull -Date: Tue Sep 6 01:52:29 2011 +0100 - - [help] Final tweak to help to remove old images and fix some placement/text issues - - help/C/figures/eog-bestfit.png | Bin 58521 -> 0 bytes - help/C/figures/eog-enlarge.png | Bin 86246 -> 0 bytes - help/C/figures/eog-normalsize.png | Bin 75456 -> 0 bytes - help/C/figures/eog-shrink.png | Bin 86037 -> 0 bytes - help/C/figures/eog-toolbar-default.png | Bin 13510 -> 0 bytes - help/C/format-change.page | 3 +++ - help/C/plugin-send-by-mail.page | 5 +++-- - 7 files changed, 6 insertions(+), 2 deletions(-) - -commit 3b4f3df363ab23802deab7dba56842b999f1a2ba -Author: Phil Bull -Date: Tue Sep 6 01:44:31 2011 +0100 - - [help] Finish reviewing all help topics. Help is now frozen and ready for translators - - help/C/copy-paste.page | 2 +- - help/C/index.page | 2 +- - help/C/plugin-postr.page | 56 +++++++++------- - help/C/plugin-send-by-mail.page | 31 +++++---- - help/C/plugin-slideshow-shuffle.page | 18 +++--- - help/C/plugin-zoom-width.page | 18 ++++-- - help/C/plugins.page | 75 +++++++++++++--------- - help/C/preferences.page | 121 +++++++++++++++++++++-------------- - help/C/print.page | 55 ++++++++++------ - help/C/rename-multiple.page | 99 +++++++++++++++------------- - help/C/slideshow.page | 33 ++++++---- - help/C/toolbar.page | 70 ++++++++++---------- - help/C/view.page | 94 +++++++++++++++------------ - help/C/zoom.page | 67 ++++++++----------- - 14 files changed, 416 insertions(+), 325 deletions(-) - -commit a854909b65a9e4dd9fb772c913771bfa4e841221 -Author: Tiffany Antopolski -Date: Sun Sep 4 20:17:54 2011 -0400 - - Changed user visible strings to use generic app name. - - This patch fixes bug #658152. - - data/eog-preferences-dialog.ui | 2 +- - src/eog-file-chooser.c | 2 +- - src/eog-util.c | 2 +- - src/eog-window.c | 6 +++--- - src/main.c | 4 ++-- - 5 files changed, 8 insertions(+), 8 deletions(-) - -commit a2d154cc511a31004387637ecf3c072ef6c432f5 -Author: Jorge González -Date: Mon Sep 5 21:04:32 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 109 +++++++++++++++++----------------------------------------- - 1 file changed, 32 insertions(+), 77 deletions(-) - -commit 819e0db3cb7912da2bc05e38d06c98e8dad9afbb -Author: Wouter Bolsterlee -Date: Mon Sep 5 20:16:51 2011 +0200 - - Updated Dutch translation by Wouter Bolsterlee - - po/nl.po | 426 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 237 insertions(+), 189 deletions(-) - -commit 71fbe59351f034dd90ea7287f0396b513990004e -Author: dmustieles -Date: Mon Sep 5 18:28:23 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 75 ++++++++++++++++++++++++++--------------------------------- - 1 file changed, 33 insertions(+), 42 deletions(-) - -commit 16a7ceaeb676cfc9311004c55221463fd844e52a -Author: Jorge González -Date: Mon Sep 5 16:55:16 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 122 +++++++++++++++++++++++++--------------------------------- - 1 file changed, 52 insertions(+), 70 deletions(-) - -commit 4b82e8755a48023dbe02b4a2e109d18b96804a8d -Author: Jorge González -Date: Mon Sep 5 13:19:53 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 1453 +++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 951 insertions(+), 502 deletions(-) - -commit 4fe6977f4b6370623aca1302568e9371d4345809 -Author: Phil Bull -Date: Mon Sep 5 02:17:26 2011 +0100 - - [help] Full review of many help topics, settings some to status=final (ready for translators) - - help/C/bug-filing.page | 20 +++--- - help/C/commandline.page | 2 +- - help/C/copy-paste.page | 13 ++-- - help/C/default.page | 42 +++++++----- - help/C/desktop-background.page | 26 ++++--- - help/C/edit.page | 47 ++++++++----- - help/C/flip-rotate.page | 35 ++++++---- - help/C/format-change.page | 106 ++++++++++++++++------------- - help/C/formats-save.page | 6 +- - help/C/formats-view.page | 14 ++-- - help/C/index.page | 8 +-- - help/C/introduction.page | 13 ++-- - help/C/open.page | 59 ++++++---------- - help/C/plugin-exif-digital.page | 82 +++++++++++++++++----- - help/C/plugin-fullscreen-double-click.page | 22 +++--- - help/C/plugin-python-console.page | 29 ++++++-- - help/C/shortcuts.page | 9 ++- - 17 files changed, 311 insertions(+), 222 deletions(-) - -commit 3c7f69a8700e41871548fd3dee5c112ce504a527 -Author: Bruno Brouard -Date: Sun Sep 4 20:28:14 2011 +0200 - - Updated French translation - - po/fr.po | 280 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 142 insertions(+), 138 deletions(-) - -commit 106c9b1c7e6a0ac617361e0be7047d75902cc855 -Author: Fran Dieguez -Date: Sun Sep 4 18:48:36 2011 +0200 - - Updated galician translations - - po/gl.po | 283 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 144 insertions(+), 139 deletions(-) - -commit cf12dd4c76fe464bdc510990142dfc6130d271c7 -Author: Ihar Hrachyshka -Date: Sun Sep 4 18:42:02 2011 +0300 - - Updated Belarusian translation. - - po/be.po | 322 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 163 insertions(+), 159 deletions(-) - -commit 63838593a1bbfffff53744b54077c007377f9552 -Author: Marek Černocký -Date: Sun Sep 4 11:47:07 2011 +0200 - - Updated Czech translation - - po/cs.po | 292 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 146 insertions(+), 146 deletions(-) - -commit be4b4d9dff06fdb6523af400dc44dafedca4e8c8 -Author: Jorge González -Date: Sun Sep 4 10:45:11 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 843 +++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 447 insertions(+), 396 deletions(-) - -commit 1371de9d6621d114184ac4c82fccb01bcb0b7184 -Author: Ryan Lortie -Date: Sat Sep 3 21:14:12 2011 -0400 - - help: Update the revision information - - Mark all pages as candidates for 3.2, last reviewed today. - - help/C/bug-filing.page | 3 +-- - help/C/commandline.page | 2 +- - help/C/copy-paste.page | 3 +-- - help/C/default.page | 3 +-- - help/C/desktop-background.page | 3 +-- - help/C/edit.page | 3 +-- - help/C/flip-rotate.page | 3 +-- - help/C/format-change.page | 3 +-- - help/C/formats-save.page | 3 +-- - help/C/formats-view.page | 3 +-- - help/C/index.page | 3 +-- - help/C/introduction.page | 3 +-- - help/C/open.page | 3 +-- - help/C/plugin-exif-digital.page | 3 +-- - help/C/plugin-fullscreen-double-click.page | 3 +-- - help/C/plugin-postr.page | 3 +-- - help/C/plugin-python-console.page | 3 +-- - help/C/plugin-send-by-mail.page | 3 +-- - help/C/plugin-slideshow-shuffle.page | 3 +-- - help/C/plugin-zoom-width.page | 3 +-- - help/C/plugins.page | 3 +-- - help/C/preferences.page | 3 +-- - help/C/print.page | 3 +-- - help/C/rename-multiple.page | 3 +-- - help/C/shortcuts.page | 2 +- - help/C/slideshow.page | 3 +-- - help/C/toolbar.page | 3 +-- - help/C/view.page | 3 +-- - help/C/zoom.page | 3 +-- - 29 files changed, 29 insertions(+), 56 deletions(-) - -commit b12d9a8f2707bb3686d93168c67e5a3e435f4482 -Author: Ryan Lortie -Date: Sat Sep 3 21:11:57 2011 -0400 - - help: remove titlecasing from - - help/C/commandline.page | 2 +- - help/C/index.page | 4 ++-- - help/C/plugin-postr.page | 2 +- - help/C/plugin-python-console.page | 2 +- - help/C/plugin-slideshow-shuffle.page | 2 +- - help/C/preferences.page | 4 ++-- - help/C/shortcuts.page | 6 +++--- - help/C/zoom.page | 2 +- - 8 files changed, 12 insertions(+), 12 deletions(-) - -commit 3e9df5b44432a8299611954e03395b30329e19c1 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Sep 3 19:04:56 2011 -0400 - - [help] s/Eye of GNOME/image viewer - - help/C/bug-filing.page | 2 +- - help/C/commandline.page | 2 +- - help/C/plugin-python-console.page | 2 +- - help/C/plugins.page | 2 +- - 4 files changed, 4 insertions(+), 4 deletions(-) - -commit 4d473cb7551e15669ff4c26be9af1e92a15fde5e -Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> -Date: Sun Sep 4 06:44:13 2011 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 438 ++++++++++++++++++++++++++++++++++-------------------------- - po/zh_TW.po | 438 ++++++++++++++++++++++++++++++++++-------------------------- - 2 files changed, 492 insertions(+), 384 deletions(-) - -commit 4144f39b38ea627532c3c74d7cddc04ab7f09006 -Author: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> -Date: Sat Sep 3 23:41:21 2011 +0300 - - Updated Finnish translation - - po/fi.po | 332 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 169 insertions(+), 163 deletions(-) - -commit a70ddd95138f537d7ebee123d49f5700b3be133d -Author: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> -Date: Sat Sep 3 23:33:54 2011 +0300 - - Updated Finnish translation by Jiri Grönroos imported from Launchpad - - po/fi.po | 1037 +++++++++++++++++++++----------------------------------------- - 1 file changed, 353 insertions(+), 684 deletions(-) - -commit 64584d42bfc7967bdfc4c9dd512cb32ea1e695cf -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Sep 3 15:56:31 2011 -0400 - - [help] replaced custom list of section links w/ links type="section" - - help/C/preferences.page | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit 89c153d2c9c0611fd5d696819c5c925b33405355 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Sep 3 15:46:37 2011 -0400 - - [help] plugins.page: added experimental if as per SM - - help/C/plugins.page | 13 +++++++++++-- - 1 file changed, 11 insertions(+), 2 deletions(-) - -commit 222e9bfff911de83675b21b986ee87b1d175e47e -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Sep 3 15:24:14 2011 -0400 - - [help] plugins.page: added install link for eog-plugins package. - - help/C/plugins.page | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit 673bad9c113f363933c58c2ea9753a4c18b01692 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Sep 3 14:56:29 2011 -0400 - - [help] s/slide show/slideshow - - help/C/preferences.page | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 54013af60eafe9e7d66ae911300e4fe8dfc0b0de -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Sep 3 14:47:07 2011 -0400 - - [help] removed links from descriptions. - - help/C/flip-rotate.page | 4 +--- - help/C/format-change.page | 3 +-- - help/C/open.page | 4 +--- - help/C/view.page | 2 +- - 4 files changed, 4 insertions(+), 9 deletions(-) - -commit 3916dadc746a348a84f8faac981ec38b15edb9ba -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Sep 3 14:33:07 2011 -0400 - - [help] Tweek title of edit.page - - help/C/edit.page | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit e50f2d9111eb7bf7154d76ce33685885a5c86cff -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sat Sep 3 20:31:59 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 65 +++++++------ - po/es.po | 296 +++++++++++++++++++++++++++++----------------------------- - 2 files changed, 187 insertions(+), 174 deletions(-) - -commit 4adaa7c7cfd63288eb70a876351063377f26649d -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Sep 3 14:29:34 2011 -0400 - - [help] drop style="task" and add seaalso link. - - help/C/formats-save.page | 2 +- - help/C/formats-view.page | 3 ++- - 2 files changed, 3 insertions(+), 2 deletions(-) - -commit 92b63064b0d219c7a52df07739638f004f9b6ba6 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Sep 3 12:16:25 2011 -0400 - - [help/C/figures] added proper sized icon images. - - Also, now using 16X16 px icon for trail link title. - - help/C/figures/eog-logo.png | Bin 0 -> 2330 bytes - help/C/figures/eog-trail.png | Bin 0 -> 732 bytes - help/C/figures/eog.png | Bin 2092 -> 0 bytes - help/C/index.page | 4 ++-- - 4 files changed, 2 insertions(+), 2 deletions(-) - -commit b58d6c58d229629f30fdaa75171fb9c263bcb10f -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Sep 3 12:06:02 2011 -0400 - - [help] Set a text-only default link title. - - This makes it so you don't see the logo in the More About - listing. - - help/C/index.page | 1 + - 1 file changed, 1 insertion(+) - -commit 781e314d5af64fb94c3b5da8c99a8215b10e72dc -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Sep 3 17:28:10 2011 +0200 - - Add translator context and comment to a split sentence - - The sentence has a GtkSpinButton injected in the middle making it - difficult to translate for some languages, as one part of the label - could end up empty. This adds translation contexts to the labels to - avoid possible ambiguities and an expaining comment. - - https://bugzilla.gnome.org/show_bug.cgi?id=654548 - - data/eog-preferences-dialog.ui | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 36aeae3a5577c7ec911a35649b5c1e5d68a6c9e7 -Author: Arash Mousavi <amousavi@src.gnome.org> -Date: Wed Aug 31 17:15:19 2011 +0430 - - Updated Persian translation - - po/fa.po | 433 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 241 insertions(+), 192 deletions(-) - -commit 516c0eb006782b17ec87bd7e9d5ea6ef3c9b8407 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Aug 30 19:50:29 2011 +0300 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b9a6f59eb5a55021451559a1a3b0d9c195b2f6cb -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Aug 30 19:30:40 2011 +0300 - - Prepare for release 3.1.90 - - NEWS | 14 ++++++++++++++ - configure.ac | 2 +- - 2 files changed, 15 insertions(+), 1 deletion(-) - -commit eb8e0e991ef6b47af8fdc629cbc282b93fbcf6d4 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Aug 30 19:27:02 2011 +0300 - - Decrease the fullscreen toolbar timeout to 2 seconds - - This is what popular fullscreen multimedia applications use, - so let's give it a try. - - src/eog-window.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 58c5b156332ff8be453a556b912167f05d37abf9 -Author: Og B. Maciel <ogmaciel@gnome.org> -Date: Thu Aug 25 09:47:43 2011 -0400 - - Updated Brazilian Portuguese translation. - - po/pt_BR.po | 404 +++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 225 insertions(+), 179 deletions(-) - -commit 655e57e45787594dbb0bb791159cf9f3c9ba5335 -Author: Alexander Shopov <ash@kambanaria.org> -Date: Mon Aug 22 07:52:28 2011 +0300 - - Updated Bulgarian translation - - po/bg.po | 385 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 212 insertions(+), 173 deletions(-) - -commit 134f15389db1054256d2dd320c35a6c6a0fec099 -Author: A S Alam <aalam@users.sf.net> -Date: Sun Aug 21 09:08:12 2011 +0530 - - update Punjabi Translation - - po/pa.po | 412 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 231 insertions(+), 181 deletions(-) - -commit 43febb8bab8a3769d0abed90edb809e9d9d19f38 -Author: Abduxukur Abdurixit <abdurixit@gmail.com> -Date: Fri Aug 19 20:31:09 2011 +0200 - - Added UG translation - - po/ug.po | 357 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 195 insertions(+), 162 deletions(-) - -commit 80e1ab88a311f244243cfb652e3a4cc8f44051a9 -Author: Andika Triwidada <andika@gmail.com> -Date: Thu Aug 18 15:06:18 2011 +0700 - - Updated Indonesian translation - - po/id.po | 646 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 299 insertions(+), 347 deletions(-) - -commit 06d3599a3828851bb7a2753f67c955983ce106a9 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Aug 15 22:15:05 2011 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 6e0f7baa94542ea331f1fd7f84b33f99b964dc02 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Aug 15 22:08:26 2011 +0200 - - Prepare for release 3.1.5 - - NEWS | 32 ++++++++++++++++++++++++++++++++ - 1 file changed, 32 insertions(+) - -commit 91807c0986a4ddedfb5602d07ddc07300342db42 -Author: Theppitak Karoonboonyanan <thep@linux.thai.net> -Date: Fri Aug 12 20:15:11 2011 +0700 - - Updated Thai translation. - - po/th.po | 391 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 216 insertions(+), 175 deletions(-) - -commit 32f566c06310c881fe93cebdd15887ee3f03b950 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Aug 9 22:15:23 2011 +0200 - - Enable fullscreen plugin by default - - The effect it causes is somewhat expected by users. - - https://bugzilla.gnome.org/show_bug.cgi?id=552537 - - data/org.gnome.eog.gschema.xml.in.in | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a3b769506abbbf7b24547b95c9c99349e99d44c0 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Aug 9 21:57:35 2011 +0200 - - Update EogWindow's image handle when selecting already loaded images - - https://bugzilla.gnome.org/show_bug.cgi?id=655889 - - src/eog-window.c | 3 +++ - 1 file changed, 3 insertions(+) - -commit 40919ebb2ce1fd70edae61c7b578c6a7ce8ef432 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Aug 2 23:18:19 2011 +0200 - - Fix bogus usage of eog_image_has_data() - - This tries to fix cases where it apparently wasn't taken into account - that if you use the function with multiple test flags all tests must be - successful or the result will be negative. - - https://bugzilla.gnome.org/show_bug.cgi?id=655794 - - src/eog-image.c | 1 + - src/eog-jobs.c | 49 +++++++++++++++++++++++++++++++++++++++++-------- - src/eog-window.c | 6 +++--- - 3 files changed, 45 insertions(+), 11 deletions(-) - -commit ffd057a0be9610b49f2dc718060c82c4ee1065be -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Aug 2 22:02:17 2011 +0200 - - Fix test selection handling in eog_image_has_data() - - Due to a wrong value negation the function was only checking one of the - selected data types and skipping the following tests. - Spotted by Fabian Sturm. - - https://bugzilla.gnome.org/show_bug.cgi?id=655794 - - src/eog-image.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit aedcf257b48e000771a0aff4be182b4ffbc76c9b -Author: Bruno Brouard <annoa.b@gmail.com> -Date: Mon Aug 8 16:23:42 2011 +0200 - - Updated French translation - - po/fr.po | 461 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 219 insertions(+), 242 deletions(-) - -commit 6ee994aa29b8b2f7e9f582004bcd10cc3b7b5bd2 -Author: Bruno Brouard <annoa.b@gmail.com> -Date: Mon Aug 8 16:00:20 2011 +0200 - - Updated French doc translation - - help/fr/fr.po | 3326 ++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 2006 insertions(+), 1320 deletions(-) - -commit d0c947fbe5177b86ef07f57bc57c93df8882ffae -Author: 朱涛 <bill_zt@sina.com> -Date: Mon Aug 8 14:18:31 2011 +0800 - - update Simplified Chinese (zh_CN) translation - - po/zh_CN.po | 28 ++++++++++------------------ - 1 file changed, 10 insertions(+), 18 deletions(-) - -commit fc0a3b92322dcef3e01af47ed80ed9ef6b44b0af -Author: Fran Dieguez <fran@openhost.es> -Date: Sun Aug 7 16:10:05 2011 +0200 - - Updated Galician translations - - po/gl.po | 380 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 206 insertions(+), 174 deletions(-) - -commit e8bc6ec7fcd5bc36f46f8ece6003351048899b34 -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Sat Aug 6 15:56:37 2011 +0300 - - Updated Hebrew translation. - - po/he.po | 384 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 208 insertions(+), 176 deletions(-) - -commit 09abf3e4778b7a95c4f05c236075c85354513a37 -Author: Mario Blättermann <mariobl@gnome.org> -Date: Thu Aug 4 11:48:30 2011 +0200 - - [l10n] Updated German translation - - po/de.po | 67 +++++++++++++++++++++++++++++----------------------------------- - 1 file changed, 30 insertions(+), 37 deletions(-) - -commit 4dad7a3aafcd37e15d5cc16e72467165927e606d -Author: Hendrik Knackstedt <kn.hendrik@gmail.com> -Date: Thu Aug 4 11:46:23 2011 +0200 - - [l10n] Updated German translation - - po/de.po | 378 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 211 insertions(+), 167 deletions(-) - -commit d4c4b19c4de241100c115f39750b9298f2c82ca1 -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Tue Aug 2 01:36:41 2011 +0200 - - Updated Hungarian translation by Balázs Meskó <meskobalazs at gmail dot com> - - po/hu.po | 393 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 217 insertions(+), 176 deletions(-) - -commit 14f5eea21885434ee217d45edbf36f337721e3fb -Author: Yuri Kozlov <yuray@komyakino.ru> -Date: Mon Aug 1 00:07:00 2011 +0400 - - Updated Russian translation - - po/ru.po | 639 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 387 insertions(+), 252 deletions(-) - -commit 203441ceba74e45860e3fbd99f61aac37c9783b6 -Author: Julius Wong <villahwong@gmail.com> -Date: Sun Jul 31 17:50:24 2011 +0000 - - Update Simplified Chinese translation. - - po/zh_CN.po | 434 ++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 245 insertions(+), 189 deletions(-) - -commit 5d411992869be7a1f188576337ffe0ecc2cc684c -Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> -Date: Sat Jul 30 19:16:23 2011 +0200 - - Updated Slovenian translation - - po/sl.po | 40 ++++------------------------------------ - 1 file changed, 4 insertions(+), 36 deletions(-) - -commit 2f5e3244c3320615ea5e065d4f98e7f71e4f1a92 -Author: Priscilla Mahlangu <priny@translate.org.za> -Date: Fri Jul 29 22:23:11 2011 +0200 - - Updated translation for Zulu (zu) - - po/zu.po | 1866 +++++++++++++++++++++++++++++++++++++++++++++++--------------- - 1 file changed, 1412 insertions(+), 454 deletions(-) - -commit 8306876e36bc85f4a5f96a837c73558bbf1b0b9e -Author: Daniel Nylander <po@danielnylander.se> -Date: Fri Jul 29 09:58:29 2011 +0200 - - Updated Swedish translation - - po/sv.po | 643 ++++++++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 451 insertions(+), 192 deletions(-) - -commit 4833c4d01df0bca99dd2636e60f33bbb8d13747c -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 27 21:18:20 2011 +0200 - - Use a simple GtkLabel for the image counter in the statusbar - - This was an extra GtkStatusbar before. This is not needed anymore as the - resize handle now works independently from the GtkStatusbar. Also the - GtkLabel seems to require less horizontal space in the statusbar. - - src/eog-statusbar.c | 18 ++++++++---------- - 1 file changed, 8 insertions(+), 10 deletions(-) - -commit 0773b4ef16a95eb071e9c40c173ea73bfc6ca479 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 27 14:30:18 2011 +0200 - - Render compressed SVGs natively as well - - These have a different mime-type which didn't trigger the native - renderer before and thus were rendered and pixelated using GdkPixbuf. - - https://bugzilla.gnome.org/show_bug.cgi?id=655377 - - src/eog-image.c | 11 ++++++++++- - 1 file changed, 10 insertions(+), 1 deletion(-) - -commit 2b71e1f53fd4f799d3b3f3de5c7d78996da9679d -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jul 25 21:57:19 2011 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit baf90081de7cf4c76c59a56aae70e7301174573a -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jul 25 21:49:10 2011 +0200 - - Prepare for release 3.1.4 - - NEWS | 31 +++++++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 32 insertions(+), 1 deletion(-) - -commit d78862c586b133cffa20b900a6298cb9310f6291 -Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> -Date: Mon Jul 25 11:04:19 2011 +0300 - - Updated Belarusian translation. - - po/be.po | 1321 +++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 698 insertions(+), 623 deletions(-) - -commit 3812bc21f5ec30b32974dcbd5f86ca2685f9aa33 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jul 23 20:04:03 2011 +0200 - - Remove obsoleted compatibility code for GTK+-2.90.5 and earlier - - We have a dependency on at least version 3.0.2 already. - - src/eog-properties-dialog.c | 4 ---- - 1 file changed, 4 deletions(-) - -commit 8a66150f15adb8fc1ad2bf624cfbb6a6b1997599 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jul 23 19:18:38 2011 +0200 - - Make eog-error-message-area.h a private header - - It's content is not introspectable at the moment and plugins cannot use - it anyway as the function to show it in an EogWindow isn't public. - - src/Makefile.am | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 399618e04391632a9ba07c2d9b176b2bfe5a7db9 -Author: José Aliste <jaliste@src.gnome.org> -Date: Mon Jun 27 14:30:54 2011 -0400 - - toolbareditor: Fix the removal of items by DnD. - - If the 'window-dragging' property of GtkToolbar is set (as it is in adwaita) - then the Toolbar starts the drag of the window on 'button-press' event. - We prevent this by connecting a handler for 'button-press' which prevents - the handler of the toolbar to be run while in edit mode. - - Fixes bug #647265 - - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 32 +++++++++++++++++++++++ - 1 file changed, 32 insertions(+) - -commit 0c82590685da3ca6e657615e0434cd86c88cc67c -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jul 23 16:12:45 2011 +0200 - - Ensure UI action sensitivity is set at least once - - Beforehand empty windows had all UI actions active. - Activation could then spawn critical warnings. This was probably caused - by the switch to GtkApplication. - - src/eog-window.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit 4bb49b5cbfb764ba57f4a4980c58b52f6046ed58 -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jul 21 15:50:00 2011 +0200 - - Fix memory leak and optimize the corresponding funcion's code - - src/eog-image.c | 40 +++++++++++++++++++--------------------- - 1 file changed, 19 insertions(+), 21 deletions(-) - -commit 7a3086d782680f22e99631ff205440b37606397e -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jul 21 15:36:29 2011 +0200 - - Drop some unneeded warnings - - These were not exactly critical enough for console output. - They were causing memory leaks as well. - Drop them in two cases and convert one to a debug message. - - src/eog-image.c | 10 ++-------- - 1 file changed, 2 insertions(+), 8 deletions(-) - -commit 71c7a069086af234a5ab882373e0e824b34d8f7d -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jul 21 15:17:40 2011 +0200 - - Remove leftover DBus service description file - - It's not needed anymore after switching to GtkApplication. - - src/eog-application-service.xml | 23 ----------------------- - 1 file changed, 23 deletions(-) - -commit 736215c0b02dbf44d8c15bed907907aa1ba0ef93 -Author: Tommi Vainikainen <thv@iki.fi> -Date: Thu Jul 21 07:30:16 2011 +0300 - - Updated Finnish translation - - po/fi.po | 695 ++++++++++++++++++++++++++------------------------------------- - 1 file changed, 291 insertions(+), 404 deletions(-) - -commit a0283f553cbc68359f64b0b363c97350d680cce6 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Tue Jul 19 22:26:46 2011 +0200 - - Updated Slovenian translation - - po/sl.po | 427 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 231 insertions(+), 196 deletions(-) - -commit 6a96a305f97e1a90850743868b9e9042cf4977ce -Author: Marek Černocký <marek@manet.cz> -Date: Mon Jul 18 21:26:11 2011 +0200 - - Updated Czech translation - - po/cs.po | 334 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 183 insertions(+), 151 deletions(-) - -commit 73a256e5f14a8e3e9832a7e9ddd64e686e2267d7 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Mon Jul 18 13:24:00 2011 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 358 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 192 insertions(+), 166 deletions(-) - -commit 301520aec06654ca4372053b962c0556c1760230 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sun Jul 17 19:44:05 2011 +0200 - - Updated Spanish translation - - po/es.po | 49 +++++++++++++++++++++++++++++++++++-------------- - 1 file changed, 35 insertions(+), 14 deletions(-) - -commit e046f8163d38c5830eef40e42970295a4dd10eae -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jul 17 15:49:52 2011 +0200 - - Place GPS Exif tags into their own subcategory - - src/eog-exif-details.c | 16 +++++++++------- - 1 file changed, 9 insertions(+), 7 deletions(-) - -commit 3e4bc1aad5bf9236705bdb049ed017f374e27552 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jul 17 15:47:28 2011 +0200 - - Reformat Exif tags for GPS position to be better understandable - - libexif's formatting of these tags is not nice to read. - Reformatted are latitude and longitude values and their reference points. - - https://bugzilla.gnome.org/show_bug.cgi?id=627185 - - src/eog-exif-details.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++-- - 1 file changed, 91 insertions(+), 3 deletions(-) - -commit 8574b4ba6e6211b5f1a7e1fade6e02da2b8703fd -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jul 17 13:57:33 2011 +0200 - - Make sure GPS Exif tags are named and ordered correctly - - Some GPS tag IDs overlap with IDs from other IFDs. - Specifically check for the GPS IFD and order the entries accordingly. - Also respect the IFD when determining the tag's title. - - https://bugzilla.gnome.org/show_bug.cgi?id=627185 - - src/eog-exif-details.c | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - -commit 1d0672a42f5bbaedb0bc424ea152c246668d36da -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sun Jul 17 12:17:58 2011 +0200 - - Updated Spanish translation - - po/es.po | 330 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 171 insertions(+), 159 deletions(-) - -commit 3da565496c3e9aa623d6287fa1c1aea5158b3f61 -Author: Javier Sánchez <jsanchez@deskblue.com> -Date: Fri Jul 15 13:09:39 2011 +0200 - - Fixed Bug 615376 - if saving an image fails it's done silently. - - - Refactored EogErrorMessageArea to include new buttons like CANCEL, - RELOAD and SAVEAS. - - Added new custom responses to EogErrorMessageArea for new buttons. - - Refactored EogCloseConfirmationDialog to include new buttons like - CLOSE, CANCEL, SAVE and SAVE AS. - - Added new custom responses to EogCloseConfirmationDialog for new - buttons. - - Refactored EogWindow to handle new EogErrorMessageArea and - EogCloseConfirmationDialog responses. - - Refactored EogImage to include write permission verification in - SAVE and SAVE AS processes. - - Added a new method to EogImage API called eog-image-is-file-writable - to determine is when the user has write permission on the image - file. - - https://bugzilla.gnome.org/show_bug.cgi?id=615376 - - src/eog-close-confirmation-dialog.c | 220 +++++++++++++++++++++--------------- - src/eog-close-confirmation-dialog.h | 31 ++++- - src/eog-error-message-area.c | 96 +++++++++++++--- - src/eog-error-message-area.h | 24 +++- - src/eog-image.c | 106 ++++++++++++++++- - src/eog-image.h | 3 + - src/eog-jobs.c | 9 +- - src/eog-window.c | 209 +++++++++++++++++++++++++--------- - 8 files changed, 525 insertions(+), 173 deletions(-) - -commit aec0f0874476c637a5a1962dbf2b1ca6ec3c0b65 -Author: Marek Černocký <marek@manet.cz> -Date: Fri Jul 15 18:45:08 2011 +0200 - - Updated Czech translation - - po/cs.po | 378 ++++++++++++++++++++++++--------------------------------------- - 1 file changed, 142 insertions(+), 236 deletions(-) - -commit 9443cd0e7d9d9081f203f015da5aa3243bb8da3d -Author: Rudolfs Mazurs <rudolfs.mazurs@gmail.com> -Date: Tue Jul 12 15:10:14 2011 +0300 - - Updated Latvian translation. - - po/lv.po | 325 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 171 insertions(+), 154 deletions(-) - -commit b451cbdf01c27f48ce268ce580ccd313f25f7d63 -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Thu Jul 7 23:02:57 2011 +0200 - - Added skeleton Hungarian translation - - help/hu/hu.po | 1995 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 1995 insertions(+) - -commit cd164bcda06485f9d587404d8eb9f1f538093fc8 -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Thu Jul 7 23:02:39 2011 +0200 - - Added hu to DOC_LINGUAS - - help/Makefile.am | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit db1617dc71785fc2ebdcd225a920eb5c020cabf7 -Author: Abduxukur Abdurixit <abdurixit@gmail.com> -Date: Thu Jul 7 16:22:23 2011 +0200 - - Added UG translation - - po/ug.po | 3467 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 1740 insertions(+), 1727 deletions(-) - -commit b815367b007686ec6828fdcc0346f5e1ef625e53 -Author: Paul Seyfert <pseyfert@mathphys.fsk.uni-heidelberg.de> -Date: Mon Jul 4 21:25:47 2011 +0200 - - [l10n] Updated German translation - - po/de.po | 304 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 159 insertions(+), 145 deletions(-) - -commit aaedf86482f57b44ccd631c485b4498ca63a22b5 -Author: Muhammet Kara <muhammet.k@gmail.com> -Date: Sun Jun 26 03:37:04 2011 +0300 - - Updated Turkish translation file header - - po/tr.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 852ad4c4e8b0971a7a511b3e50190a0ca9c1f3c8 -Author: Muhammet Kara <muhammet.k@gmail.com> -Date: Sun Jun 26 02:46:06 2011 +0300 - - Updated Turkish translation - - po/tr.po | 278 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 144 insertions(+), 134 deletions(-) - -commit 1cc2606adac0d8a2b7428dbc17088b23810ca599 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jun 24 14:54:12 2011 +0200 - - Drop size-request signal callback for fullscreen toolbar - - Didn't work with GTK-3 and caused critical warnings when entering - fullscreen mode. Just removing the callback seems to be sufficient as - the toolbar's size request is set when entering fullscreen mode anyway. - - https://bugzilla.gnome.org/show_bug.cgi?id=653162 - - src/eog-window.c | 12 ------------ - 1 file changed, 12 deletions(-) - -commit 641143f5490f20f549cc897a94a1b51de3a749d0 -Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> -Date: Wed Jun 22 21:18:06 2011 +0200 - - Updated Slovenian translation - - help/sl/sl.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 16146d6bd0333e8d258db39c2e923e0757c488ad -Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> -Date: Wed Jun 22 21:13:37 2011 +0200 - - Updated Slovenian translation - - help/sl/sl.po | 3107 ++++++++++++++++++++++++++++++++++++++++++--------------- - 1 file changed, 2309 insertions(+), 798 deletions(-) - -commit 1e88937203b14f6bd83084b795eb775ba3328071 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Wed Jun 15 10:21:42 2011 +0300 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ffdc7a28395e533f9732a6354eee62027f982972 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Wed Jun 15 10:03:04 2011 +0300 - - Prepare for 3.1.2 release - - NEWS | 37 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 37 insertions(+) - -commit 757699b9e5f963dd7d8be7779fc8ca00b7d336e7 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jun 12 17:07:35 2011 +0200 - - Remove spurious g_object_unref - - The released reference isn't owned by the job. - Could cause a segfault upon closing an EogWindow. - - src/eog-jobs.c | 2 -- - 1 file changed, 2 deletions(-) - -commit 0d3c812764252e7582d05147b2724c9e272d0e7b -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jun 12 13:03:28 2011 +0200 - - Fix critical warning when closing empty windows - - src/eog-window.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8e6a2e88f7cbfe267b34e8cb5eb1077ababdb135 -Author: Милош Поповић <gpopac@gmail.com> -Date: Sun Jun 12 04:23:41 2011 +0200 - - Revert "Updated Serbian translation" - - This reverts commit 652bfc1d9f3a4fd3b56ebe894fab5a837df9313b. - - po/sr.po | 767 +++++++++++++++++++++++++++++++++------------------------ - po/sr@latin.po | 767 +++++++++++++++++++++++++++++++++------------------------ - 2 files changed, 888 insertions(+), 646 deletions(-) - -commit 652bfc1d9f3a4fd3b56ebe894fab5a837df9313b -Author: Мирослав Николић <miroslavnikolic@rocketmail.com> -Date: Sun Jun 12 03:46:32 2011 +0200 - - Updated Serbian translation - - po/sr.po | 767 ++++++++++++++++++++++++--------------------------------- - po/sr@latin.po | 767 ++++++++++++++++++++++++--------------------------------- - 2 files changed, 646 insertions(+), 888 deletions(-) - -commit b42683d6dd343af62a2c9f893d18fdb46c6c4613 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Sat Jun 11 17:37:00 2011 +0200 - - Updated Slovenian translation - - po/sl.po | 280 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 161 insertions(+), 119 deletions(-) - -commit 3d39587751ead63a5f6458ce6daf5dd1acf8165a -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Jun 9 22:33:30 2011 +0300 - - Port EogApplication to GtkApplication - - This removes the direct dependency on dbus and makes use of the - GApplication/GtkApplication facilities for uniqueness and activation. - Bump the glib requirement to 2.29.4, since we need - G_APPLICATION_NON_UNIQUE. - - https://bugzilla.gnome.org/show_bug.cgi?id=622876 - - configure.ac | 27 +------ - src/Makefile.am | 11 --- - src/eog-application.c | 214 ++++++++++++++++++++------------------------------ - src/eog-application.h | 15 +--- - src/eog-util.c | 2 - - src/eog-util.h | 2 - - src/eog-window.c | 21 +---- - src/main.c | 116 +++------------------------ - 8 files changed, 101 insertions(+), 307 deletions(-) - -commit 97b087796ed130f989a7af9fde9c630104e6ed62 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Thu Jun 9 13:57:17 2011 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 220 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 116 insertions(+), 104 deletions(-) - -commit ecd5bf02d8f227f3b1a38f42c164ccb3a970a583 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Wed Jun 8 22:32:04 2011 +0300 - - Silent a unused-variable warning - - src/eog-image.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 8ac825bea9ce49e500efd8ed94bd3177b03f9731 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jun 8 20:58:29 2011 +0200 - - Use GdkPixbuf's "orientation" feature as fallback for autorotation - - Useful for formats where we don't support extracting the needed data - ourselves (e.g TIFF) and if eog is compiled without libexif. - - https://bugzilla.gnome.org/show_bug.cgi?id=548474 - https://bugzilla.gnome.org/show_bug.cgi?id=615114 - - src/eog-image-private.h | 2 +- - src/eog-image.c | 42 +++++++++++++++++++++++++++++++++--------- - src/eog-image.h | 2 -- - 3 files changed, 34 insertions(+), 12 deletions(-) - -commit bded0286f72bc9b01d3a73e329751e62212efdea -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Tue Jun 7 19:35:17 2011 -0400 - - help/C/index.page: added role attribute to title. - - help/C/index.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0609802455eee05eb25f417bdffbdd4240783986 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Mon Jun 6 11:20:47 2011 +0200 - - Updated Galician translations - - po/gl.po | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - -commit 73dd35c815883bc00cfd7ce190ce10daefb28f41 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Mon Jun 6 00:29:53 2011 +0200 - - Updated Galician translations - - po/gl.po | 267 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 140 insertions(+), 127 deletions(-) - -commit 4c0b5c84dc4c5a6fce6285f492d5f3c1a8724f45 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 4 21:41:00 2011 +0200 - - Make the displayed EogImage a property of EogScrollView - - Besides the more obvious object orientation it also allows watch the - property for changes. Might be useful for plugins. - - https://bugzilla.gnome.org/show_bug.cgi?id=544068 - - src/eog-scroll-view.c | 42 ++++++++++++++++++++++++++++++++++++++++++ - src/eog-scroll-view.h | 2 ++ - 2 files changed, 44 insertions(+) - -commit 682e323c878fffb14cb5f425218ca242cb5b392b -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Sat Jun 4 13:43:07 2011 +0300 - - Updated Hebrew translation. - - po/he.po | 218 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 115 insertions(+), 103 deletions(-) - -commit 0f9e861e10bacf1df50ddc344194b4bb3b09b1c5 -Author: krishnababu k <kkrothap@redhat.ocm> -Date: Sat Jun 4 02:18:54 2011 +0530 - - Updated Telugu Translations done by Praveen Illa - - po/te.po | 1380 +++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 735 insertions(+), 645 deletions(-) - -commit 1a948b3f5bb6dc5af8d407c8d7b9cc55cc47b6fa -Author: Carles Ferrando <carles.ferrando@gmail.com> -Date: Sun May 29 17:57:08 2011 +0200 - - [l10n]Updated Catalan (Valencian) translation - - po/ca@valencia.po | 696 +++++++++++++++++++++++++++++------------------------- - 1 file changed, 374 insertions(+), 322 deletions(-) - -commit d57936817e1738aaa6d359de45aeab7a48a280c8 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri May 27 19:30:01 2011 +0200 - - Use the result of librsvg's parser to generate pixel data out of SVGs - - Resolves problems with converting SVGs that use relative paths. - Also avoids the duplicate SVG parsing by gdk-pixbuf's SVG loader. - It's not the nicest code, but we need to split EogImage in - format-specific variants anyway. So, this can stay like this until then. - - https://bugzilla.gnome.org/show_bug.cgi?id=642725 - - src/eog-image.c | 81 ++++++++++++++++++++++++++++++++++++++------------------- - 1 file changed, 54 insertions(+), 27 deletions(-) - -commit 66357c088a72d3f9f61de292a2b4275ab425f23f -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Sat May 21 09:30:50 2011 +0200 - - Updated Spanish translation - - po/es.po | 217 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 115 insertions(+), 102 deletions(-) - -commit f43d5933761437fce5af78e7da6dd78832d6fa63 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri May 20 12:12:50 2011 +0200 - - Rename "Open Containing Folder" to "Show Containing Folder" - - Makes it clearer what is meant and is less ambigious with eog's own - functionality to "Open" folders. - - src/eog-window.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 9df5fd43cc9cea9ded47953d22d82cfea1ace015 -Author: Akshay Gupta <kitallis@gmail.com> -Date: Fri May 20 12:07:19 2011 +0200 - - Add an "Open containing folder" command - - https://bugzilla.gnome.org/show_bug.cgi?id=650402 - - data/eog-toolbar.xml | 1 + - data/eog-ui.xml | 3 +++ - src/eog-window.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 58 insertions(+) - -commit 4247b716a9f1692dd1424dd0ba15109cf4a56385 -Author: Mario Blättermann <mariobl@gnome.org> -Date: Thu May 19 21:24:37 2011 +0200 - - Updated German doc translation - - help/de/de.po | 3303 ++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 1986 insertions(+), 1317 deletions(-) - -commit db0fe961f44d94f9029e4bb49a8e2692998d6b03 -Author: Christian Kirbach <Christian.Kirbach@googlemail.com> -Date: Sat May 14 00:15:20 2011 +0200 - - [l10n] Updated German help screen-shots - - help/de/figures/eog-bestfit.png | Bin 0 -> 67392 bytes - help/de/figures/eog-enlarge.png | Bin 0 -> 159779 bytes - help/de/figures/eog-normalsize.png | Bin 0 -> 69715 bytes - help/de/figures/eog-shrink.png | Bin 0 -> 135704 bytes - help/de/figures/eog-toolbar-default.png | Bin 0 -> 14272 bytes - help/de/figures/eog-toolbar-editor.png | Bin 0 -> 27765 bytes - help/de/figures/eog_save_as_window.png | Bin 24488 -> 0 bytes - help/de/figures/eog_start_window.png | Bin 10849 -> 0 bytes - help/de/figures/eog_toolbar_editor_window.png | Bin 23997 -> 0 bytes - help/de/figures/image-view-prefs.png | Bin 0 -> 35103 bytes - help/de/figures/multiple-convert.png | Bin 0 -> 27059 bytes - help/de/figures/multiple-rename-count.png | Bin 0 -> 27167 bytes - help/de/figures/plugin-send-by-mail.png | Bin 0 -> 60832 bytes - help/de/figures/plugins-all.png | Bin 0 -> 63999 bytes - help/de/figures/prefs-plugins-date.png | Bin 0 -> 29366 bytes - help/de/figures/prefs-plugins-fullscreen.png | Bin 0 -> 29281 bytes - help/de/figures/prefs-plugins.png | Bin 0 -> 29235 bytes - help/de/figures/slideshow-prefs.png | Bin 0 -> 23762 bytes - 18 files changed, 0 insertions(+), 0 deletions(-) - -commit 3997e9f8a230bdc09a857a0f5f7449a1d45ee2e8 -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Thu May 12 20:18:04 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 10 +++++++--- - 1 file changed, 7 insertions(+), 3 deletions(-) - -commit 3a01b7679e727408b4f937ed8b9ddc61ab7461fb -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Thu May 12 20:15:32 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 158 +++++++++++++++++++++++++++++++++++++++++++++++++++++----- - 1 file changed, 146 insertions(+), 12 deletions(-) - -commit 1c3a5f6b0137de0c1e8829b4aa8e23a92c657082 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Wed May 11 22:32:12 2011 +0200 - - mallard: fix typo - - https://bugzilla.gnome.org/show_bug.cgi?id=649894 - - help/C/preferences.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 93803031ff5e2d128ad35662e834ef463c577555 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon May 9 22:46:43 2011 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit e910d6401ae2c0b30939be050e2ea2d5d3e129aa -Author: Felix Riemann <friemann@gnome.org> -Date: Mon May 9 22:40:31 2011 +0200 - - Prepare for release 3.1.1 - - NEWS | 45 +++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 45 insertions(+) - -commit 3a19a69723e630485a4010e8fb588e3763e182b3 -Author: Kristjan SCHMIDT <kristjan.schmidt@googlemail.com> -Date: Mon May 9 20:16:04 2011 +0200 - - Updated Esperanto translation - - po/eo.po | 885 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 485 insertions(+), 400 deletions(-) - -commit 385b4e448b74b0f0b1e3bf0e3e42e2e4d6d74730 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Mon May 9 19:38:23 2011 +0200 - - Updated Spanish translation - - po/es.po | 254 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 126 insertions(+), 128 deletions(-) - -commit 3adb22a9b66549a86fa6c59e17d99f1ad4e1df46 -Author: Joaquín Aramendía <samsagax@gmail.com> -Date: Mon May 9 19:27:33 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 1344 ++------------------------------------------------------- - 1 file changed, 39 insertions(+), 1305 deletions(-) - -commit d782906d89c51f6b4f749bece651a5efc8401c0e -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Mon May 9 08:49:41 2011 +0300 - - Updated Hebrew translation. - - po/he.po | 258 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 131 insertions(+), 127 deletions(-) - -commit 30f34a8df68a1263e69ecde76118d8a79da67a9f -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sun May 8 22:46:03 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 93 +++++++++++++++++++++++++++-------------------------------- - 1 file changed, 42 insertions(+), 51 deletions(-) - -commit 52811d0645d9b7979f85dd4970a788eee91463f7 -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Sun May 8 17:13:53 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 72 +++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 38 insertions(+), 34 deletions(-) - -commit d5d4550dae8ae295f1da76a1dd7e326d989002ac -Author: Mario Blättermann <mariobl@gnome.org> -Date: Wed May 4 21:22:13 2011 +0200 - - [doc] Fixed another typo - - help/C/formats-view.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 994c6d13fd5f38b32a9e3c185ebda4101076b68c -Author: Mario Blättermann <mariobl@gnome.org> -Date: Wed May 4 20:33:10 2011 +0200 - - [doc] Fixed some typos - - help/C/shortcuts.page | 2 +- - help/C/zoom.page | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit 8c9fafb30d85dbb87732faf5e1b764e3380830a7 -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Wed May 4 19:44:13 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 101 ++++++++++++++++++++++++---------------------------------- - 1 file changed, 41 insertions(+), 60 deletions(-) - -commit eff2387978ebba5e6a1301d3daa1d23dd7a63355 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Wed May 4 11:17:31 2011 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 278 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 146 insertions(+), 132 deletions(-) - -commit f1095f58d479d70e7ccb42c3e024c91bce591c5c -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Tue May 3 23:07:14 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 980 ++++++++++++++++++++++++++++------------------------------ - 1 file changed, 465 insertions(+), 515 deletions(-) - -commit 9b10da30af255f532846fe2b5afc96fcbfc5c759 -Author: Muhammet Kara <muhammet.k@gmail.com> -Date: Tue May 3 09:08:26 2011 +0300 - - Updated Turkish translation - - po/tr.po | 253 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 129 insertions(+), 124 deletions(-) - -commit 2da9bf6318360983a148cb1c2cb6aacbebf9ef92 -Author: Daniel Korostil <ted.korostiled@gmail.com> -Date: Mon May 2 03:06:31 2011 +0300 - - Uploaded Ukranian - - po/uk.po | 269 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 135 insertions(+), 134 deletions(-) - -commit 25e1f4cd1ba21574d8cb9b634d303d63980fc1cf -Author: Abduxukur Abdurixit <abdurixit@gmail.com> -Date: Sun May 1 19:53:15 2011 +0200 - - Added UG translation - - po/ug.po | 3454 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 1727 insertions(+), 1727 deletions(-) - -commit 632b792257ec85ee36c52d89a3e4304ba3200184 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Apr 30 21:27:50 2011 -0400 - - help/C, commandline.age: changed example for slideshow mode. - - Makes more sense to give a directory as a parameter. - - help/C/commandline.page | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 214e3f3c93e3a1625e4282f108b5cb96062952eb -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Apr 30 21:26:40 2011 -0400 - - help/C, shortcuts.page: minor changes - - Ctrl+W closes current window (not eog when multiple images are open). Also, shortened zoom shortcuts (no pun intended). - - help/C/shortcuts.page | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit fc85f1acb9c15ae6bfc359824efd668fbe668505 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Apr 30 21:06:59 2011 -0400 - - help/C, print.page: added sidenote - - Image can be adjusted by dragging it around in the preview. - - help/C/print.page | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - -commit 48af53efc616de8d0279c06e768f4c7eb8a36e78 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Apr 30 20:12:56 2011 -0400 - - help/C, linked "rename-mulitple" and "format-change#multiple" sections. - - Changed some notes to sidebar notes, resized images to look better in smaller yelp window, and added note about "as is" option in "rename-multiple". - - help/C/format-change.page | 21 +++++++++++-------- - help/C/rename-multiple.page | 50 +++++++++++++++++++++++++++++++-------------- - 2 files changed, 48 insertions(+), 23 deletions(-) - -commit db269722e0a52c613695a4c38ba2dcccdfabc2b5 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Apr 30 12:49:33 2011 -0400 - - help/C, zoom.page: added clarification about zoom->Best Fit behaviour. - - Also, changed note style, replaced keyboard shortcuts section with a 'seealso' link to shortcuts#zoom-rotate, and - moved the "wheel" section up, for visual purposes. - - help/C/zoom.page | 38 ++++++++++++-------------------------- - 1 file changed, 12 insertions(+), 26 deletions(-) - -commit f33cb2b12df31000225497538dd1554eb4b331a4 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Apr 30 13:04:37 2011 +0200 - - mallard: fix chapter reference - - help/C/plugins.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 2267ada21f9d85abbb66143807b68b290071ead5 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Apr 30 12:50:38 2011 +0200 - - mallard: Correct a few typos - - help/C/edit.page | 2 +- - help/C/formats-save.page | 2 +- - help/C/formats-view.page | 2 +- - help/C/open.page | 2 +- - help/C/view.page | 2 +- - 5 files changed, 5 insertions(+), 5 deletions(-) - -commit f1c1a75a41fda6f61876c8ee25776df4c229a3ad -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Apr 30 11:54:07 2011 +0200 - - Adapt Makefile to recent changes to Mallard docs - - help/Makefile.am | 3 --- - 1 file changed, 3 deletions(-) - -commit 5183641e190dfc7542843e3c13030bec5543d579 -Author: Marek Černocký <marek@manet.cz> -Date: Sat Apr 30 11:24:16 2011 +0200 - - Updated Czech translation - - po/cs.po | 248 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 126 insertions(+), 122 deletions(-) - -commit 4c46822b3746ce536d2c8c35cae11545780377a9 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Fri Apr 29 14:03:36 2011 -0400 - - help/C, combined content of edit.page and delete.page - - Deleted delete.page, no pun intended. - - help/C/delete.page | 27 --------------------------- - help/C/edit.page | 16 +++++++++++++--- - 2 files changed, 13 insertions(+), 30 deletions(-) - -commit cb5e8ab8af132a9f9370ebd7da23bc14786ca769 -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Fri Apr 29 19:56:26 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 336 +++++++++++++++++++++++++++++----------------------------- - 1 file changed, 169 insertions(+), 167 deletions(-) - -commit 38911315e00bb4b6f82ba3a54739a1891f7f5b95 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Fri Apr 29 13:50:13 2011 -0400 - - help/C, plugins pages: combined date,map and exif. - - Removed plugin-map.page and plugin-date-statusbar.page. Moved - content from these pages to plugin-exif-digital.page - - help/C/plugin-date-statusbar.page | 30 ------------------------------ - help/C/plugin-exif-digital.page | 27 +++++++++++++++++++-------- - help/C/plugin-map.page | 30 ------------------------------ - 3 files changed, 19 insertions(+), 68 deletions(-) - -commit 49c635e5fe7673444880dc01f167f3fd18c774a9 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Fri Apr 29 13:24:03 2011 -0400 - - help/C, shortcuts.page, removed reference to custom shortcuts. - - Editing hotkeys via can_change_accels fails in gnome3, therefore - removed the instructions. - A few other grammatical and order fixes. - - help/C/shortcuts.page | 151 ++++++++++++-------------------------------------- - 1 file changed, 34 insertions(+), 117 deletions(-) - -commit f04323e008040424b394b4c50b6a5bac77188423 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Fri Apr 29 13:07:07 2011 -0400 - - help/C, shortcuts.page: Gnome -> GNOME - - help/C/shortcuts.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 9adf2c825c7492587579233e4b410cc0cde66ba0 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Thu Apr 28 21:25:34 2011 +0200 - - Updated Slovenian translation - - po/sl.po | 319 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 146 insertions(+), 173 deletions(-) - -commit ebfbd62ce9dc5efcc55e98e7e38458763dd7effc -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Thu Apr 28 21:01:33 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 2613 +++++++++++++++++++++++++++++++++++++++++++++++++-------- - 1 file changed, 2268 insertions(+), 345 deletions(-) - -commit d26cbf159243401686b6c54ecd769dc966ab3185 -Author: Ryan Lortie <desrt@desrt.ca> -Date: Thu Apr 28 00:46:43 2011 -0400 - - avoid unused 'screen' variable without lcms - - Newer GCC flags a compile warning on eog-window.c when HAVE_LCMS is - undefined due to the 'screen' variable being declared and initialised in - eog_window_init() but not used. - - Avoid that by having eog_window_get_display_profile() take the widget - itself and query the screen internally. - - src/eog-window.c | 9 ++++----- - 1 file changed, 4 insertions(+), 5 deletions(-) - -commit 6741163e22c2f0fe9f5da4d4d7f22007f4b4ffe3 -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Apr 28 16:10:39 2011 +0200 - - Fix a few spelling errors in the help docs - - help/C/bug-filing.page | 2 +- - help/C/commandline.page | 2 +- - help/C/format-change.page | 4 ++-- - help/C/index.page | 8 ++++---- - help/C/introduction.page | 4 ++-- - help/C/plugin-python-console.page | 2 +- - help/C/shortcuts.page | 2 +- - 7 files changed, 12 insertions(+), 12 deletions(-) - -commit 0062419b9db41601066e6b4ed86844782da89c67 -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Apr 28 15:17:22 2011 +0200 - - Improve compression of new figures for Mallard docs - - help/C/figures/eog-bestfit.png | Bin 63503 -> 58521 bytes - help/C/figures/eog-enlarge.png | Bin 93637 -> 86246 bytes - help/C/figures/eog-normalsize.png | Bin 82170 -> 75456 bytes - help/C/figures/eog-shrink.png | Bin 92504 -> 86037 bytes - help/C/figures/eog-toolbar-default.png | Bin 17912 -> 13510 bytes - help/C/figures/eog-toolbar-editor.png | Bin 28401 -> 24562 bytes - help/C/figures/eog.png | Bin 2189 -> 2092 bytes - help/C/figures/image-view-prefs.png | Bin 38709 -> 30993 bytes - help/C/figures/multiple-convert.png | Bin 31050 -> 24970 bytes - help/C/figures/multiple-rename-count.png | Bin 31295 -> 25142 bytes - help/C/figures/plugin-send-by-mail.png | Bin 60754 -> 56866 bytes - help/C/figures/plugin-tools-flickr.png | Bin 60590 -> 56552 bytes - help/C/figures/plugins-all.png | Bin 68993 -> 48189 bytes - help/C/figures/prefs-plugins-date.png | Bin 34979 -> 28551 bytes - help/C/figures/prefs-plugins-fullscreen.png | Bin 34889 -> 28569 bytes - help/C/figures/prefs-plugins.png | Bin 33565 -> 26618 bytes - help/C/figures/slideshow-prefs.png | Bin 26145 -> 20616 bytes - 17 files changed, 0 insertions(+), 0 deletions(-) - -commit 9524aa6dc5b576ce37fa972d95396847a6cf69e2 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Thu Apr 28 02:52:05 2011 -0400 - - help/C: fix typo in page title - - help/C/plugin-exif-digital.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 5b5cee82eb6f050a2bf9fc207ca30a111cbe4524 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Thu Apr 28 02:48:55 2011 -0400 - - help/C, mallard: ready for review. - - Finished plugin pages. Updated status of all pages to 'review'. - Updated plugins-all.png. - - help/C/default.page | 2 +- - help/C/figures/plugins-all.png | Bin 57998 -> 68993 bytes - help/C/index.page | 2 +- - help/C/plugin-date-statusbar.page | 2 +- - help/C/plugin-exif-digital.page | 14 ++++++++++---- - help/C/plugin-map.page | 11 ++++++++--- - help/C/plugin-postr.page | 2 +- - help/C/plugin-python-console.page | 8 ++++++-- - help/C/plugin-send-by-mail.page | 2 +- - help/C/plugin-slideshow-shuffle.page | 2 +- - help/C/plugin-zoom-width.page | 8 ++++++-- - help/C/plugins.page | 4 ++-- - 12 files changed, 38 insertions(+), 19 deletions(-) - -commit 6c37f894c9401b43a95c0b30be05da5dcf16cc55 -Author: Ryan Lortie <desrt@desrt.ca> -Date: Thu Apr 28 00:36:42 2011 -0400 - - Add Tiffany Antopolski to the list of documenters - - src/eog-window.c | 1 + - 1 file changed, 1 insertion(+) - -commit cca6217e7bc46154c5382bb4b00e1197c8d8f9cc -Author: Ryan Lortie <desrt@desrt.ca> -Date: Thu Apr 28 00:35:14 2011 -0400 - - Update help links - - Modify the help buttons in the edit toolbar and preferences dialogs to - point at the correct pages in the new documentation. - - src/eog-preferences-dialog.c | 2 +- - src/eog-window.c | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit baef1541bf395a49a0b355ebc7ab247c25a1a18d -Author: Ryan Lortie <desrt@desrt.ca> -Date: Thu Apr 28 00:33:58 2011 -0400 - - Re-enable help button in preferences dialog - - Fix a small regression introduced in commit - dbd91b21b9d549dfac8040c00e5737597c4c3536 by re-assigning the proper - response IDs to the buttons in the preferences dialog. - - data/eog-preferences-dialog.ui | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 3d295b7fddca8432706da6cba6044e6acb459f6d -Author: Ryan Lortie <desrt@desrt.ca> -Date: Thu Apr 28 00:13:22 2011 -0400 - - Death to Docbook! Long live MALLARD! - - Toss the old docbook-based documentation and update the Makefile to - build and install the new Mallard-based documentation. - - help/C/eog.xml | 800 --------------------------- - help/C/figures/eog_save_as_window.png | Bin 23436 -> 0 bytes - help/C/figures/eog_start_window.png | Bin 8424 -> 0 bytes - help/C/figures/eog_toolbar_editor_window.png | Bin 20277 -> 0 bytes - help/C/legal.xml | 85 +-- - help/Makefile.am | 62 ++- - 6 files changed, 64 insertions(+), 883 deletions(-) - -commit 3c3a83506256ade465bd817453202296b1cda618 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Sep 12 21:18:03 2010 +0200 - - Switch to lcms2 for color management - - Version 2 is listed as "official" external dependency for GNOME and is - said to be faster in some cases. - - configure.ac | 4 ++-- - src/eog-image.c | 6 +++--- - src/eog-image.h | 2 +- - src/eog-metadata-reader-jpg.c | 8 +++----- - src/eog-metadata-reader-png.c | 8 +++----- - src/eog-metadata-reader.h | 2 +- - src/eog-window.c | 12 +----------- - 7 files changed, 14 insertions(+), 28 deletions(-) - -commit 203e7474d9381c05033c4d25db0ed9e136efffb2 -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Wed Apr 27 20:13:28 2011 +0200 - - Updated Spanish translation - - help/es/es.po | 3000 +++++++++++++++++++++++++++------------------------------ - 1 file changed, 1422 insertions(+), 1578 deletions(-) - -commit dda97605eb8eacda643b6ab5aaa4bbc065e06e36 -Author: Yasumichi Akahoshi <yasumichi@vinelinux.org> -Date: Wed Apr 27 23:24:43 2011 +0900 - - Updated Japanese translation - - help/ja/figures/eog_save_as_window.png | Bin 0 -> 14080 bytes - help/ja/figures/eog_start_window.png | Bin 10941 -> 7912 bytes - help/ja/figures/eog_toolbar_editor_window.png | Bin 0 -> 12420 bytes - help/ja/ja.po | 2351 ++++++++++++++++++------- - 4 files changed, 1762 insertions(+), 589 deletions(-) - -commit e78675e87876363bf55ad6abbb31e1266473b4a9 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Apr 26 23:10:00 2011 +0200 - - toolbareditor: Resync with latest code from libegg - - Contains various fixes and optimizations regarding GTK+-3 and - introspection. Will also make future code syncs easier. - - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 156 ++++++++++++++++------ - cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 4 + - cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 8 +- - 3 files changed, 125 insertions(+), 43 deletions(-) - -commit 925adc2db04e11db105168d06011b6ca923da8a7 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Apr 26 22:47:15 2011 +0200 - - Raise version number to reflect development state - - We are on an unstable branch after all. - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d55706b2780bd135450423625a1cffb04d79598a -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Apr 26 22:43:48 2011 +0200 - - Prevent from opening multiple toolbar editor windows - - Multiple windows where useless as the toolbar became read-only again - when the first window was closed. - - src/eog-window.c | 7 +++++++ - 1 file changed, 7 insertions(+) - -commit 0a16d74a768987241879913f873a68709f3587b2 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Apr 26 22:39:38 2011 +0200 - - Don't allow hiding the toolbar while editing it with the editor - - https://bugzilla.gnome.org/show_bug.cgi?id=648440 - - src/eog-window.c | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - -commit 314fc461e6ce8be8c579684e2eb435387f5c348b -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Mon Apr 25 17:37:45 2011 -0400 - - help/C, mallard: more plugin content added. - - help/C/figures/plugin-send-by-mail.png | Bin 0 -> 60754 bytes - help/C/figures/plugin-tools-flickr.png | Bin 0 -> 60590 bytes - help/C/plugin-fullscreen-double-click.page | 3 ++- - help/C/plugin-postr.page | 11 +++++++++++ - help/C/plugin-send-by-mail.page | 12 ++++++++++-- - help/C/plugin-slideshow-shuffle.page | 8 +++++++- - help/C/plugins.page | 18 +++++++++++------- - help/C/preferences.page | 2 ++ - 8 files changed, 43 insertions(+), 11 deletions(-) - -commit 14b311ab0a1b3785b5bb63558bc055c7ef948f8a -Author: Abduxukur Abdurixit <abdurixit@gmail.com> -Date: Sun Apr 24 20:57:49 2011 +0200 - - Added UG translation - - po/ug.po | 372 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 216 insertions(+), 156 deletions(-) - -commit d4ffd93d1a2dd17174178cd9fbbfbb1c93295708 -Author: Theppitak Karoonboonyanan <thep@linux.thai.net> -Date: Sun Apr 24 20:08:56 2011 +0700 - - Updated Thai translation. - - po/th.po | 414 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 209 insertions(+), 205 deletions(-) - -commit b886dfc7824e579a04bc8ccadf7069ae2b92495f -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Apr 23 00:46:59 2011 -0400 - - help/C, mallard: added navigational links. - - help/C/preferences.page | 8 +++++++- - 1 file changed, 7 insertions(+), 1 deletion(-) - -commit e13565735c8fd2cb39a01ec03df5480a7b76c0f5 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Apr 23 00:24:29 2011 -0400 - - help/C, mallard: finished preferences and links. - - help/C/figures/plugins-all.png | Bin 0 -> 57998 bytes - help/C/plugins.page | 55 +++++++++++++++++++++++++++++++++++++++++ - help/C/preferences.page | 11 +++++++-- - 3 files changed, 64 insertions(+), 2 deletions(-) - -commit b4b8559b6c3faca90844bc33958f83cb1947d04c -Author: Arash Mousavi <amousavi@src.gnome.org> -Date: Fri Apr 22 13:01:38 2011 +0430 - - Updated Persian translation - - po/fa.po | 503 +++++++++++++++++++++++++++------------------------------------ - 1 file changed, 216 insertions(+), 287 deletions(-) - -commit 1281a69258cf9302e7e7fa056f38f0740eda9340 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Fri Apr 22 03:17:44 2011 -0400 - - help/C,mallard: images added and more plugin info. - - help/C/figures/prefs-plugins-date.png | Bin 0 -> 34979 bytes - help/C/figures/prefs-plugins-fullscreen.png | Bin 0 -> 34889 bytes - help/C/figures/prefs-plugins.png | Bin 0 -> 33565 bytes - help/C/plugin-date-statusbar.page | 30 +++++++++++++++++++++++++++ - help/C/plugin-fullscreen-double-click.page | 31 ++++++++++++++++++++++++++++ - help/C/preferences.page | 8 ++++--- - 6 files changed, 66 insertions(+), 3 deletions(-) - -commit 30a5a23b7d6219ae113832e16928dfab40cf54ad -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Fri Apr 22 02:25:38 2011 -0400 - - help/C, mallard: content added about using Postr. - - help/C/plugin-postr.page | 18 ++++++++++++++---- - 1 file changed, 14 insertions(+), 4 deletions(-) - -commit 107adb3c8accc3e1c0eb06e77717f012127ff464 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Apr 20 23:18:33 2011 +0200 - - Allow editing the toolbar only when it is visible - - Disables the toolbar editor in the menu when the toolbar is toggled off. - Fixes bug #648055. - - src/eog-window.c | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - -commit aaa4330affa9e738b69af2d90a272db263c08f03 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Wed Apr 20 00:32:25 2011 -0400 - - help/C, mallard: preferences clarifications. - - Clarified view preferences and added seealso links to slideshow. - - help/C/plugin-slideshow-shuffle.page | 1 + - help/C/preferences.page | 52 +++++++++++++++++++----------------- - 2 files changed, 29 insertions(+), 24 deletions(-) - -commit dee93df8db7010a708cb209673ff8bff62f240ed -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Tue Apr 19 23:53:12 2011 -0400 - - help/C, mallard: updated status draft-> review. - - help/C/bug-filing.page | 3 ++- - help/C/copy-paste.page | 2 +- - help/C/default.page | 2 +- - help/C/desktop-background.page | 2 +- - help/C/format-change.page | 2 +- - help/C/index.page | 2 +- - help/C/preferences.page | 2 +- - help/C/print.page | 2 +- - help/C/toolbar.page | 2 +- - help/C/view.page | 2 +- - 10 files changed, 11 insertions(+), 10 deletions(-) - -commit e7a61dfc9a3215d03239b13eccaf6a4c4a906a80 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Tue Apr 19 23:46:07 2011 -0400 - - help/C, mallard: print content added & title fixes - - Title fixes consist of grammar (tense) adjustments. - - help/C/{image-edit.page => edit.page} | 4 ++-- - help/C/flip-rotate.page | 1 - - help/C/index.page | 8 +++---- - help/C/open.page | 7 ++++-- - help/C/print-photo.page | 25 ---------------------- - help/C/print-settings.page | 25 ---------------------- - help/C/print.page | 40 +++++++++++++++++++++++++++++++++++ - help/C/view.page | 2 +- - help/C/zoom.page | 2 +- - 9 files changed, 53 insertions(+), 61 deletions(-) - -commit 2ab3b1aa2a801e9b07505fcdce278316da7e085b -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Mon Apr 18 23:18:49 2011 -0400 - - help/C, mallard, fixed tag error - - help/C/introduction.page | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit e3f78a6661281eaea624e94845f5ddf4e8e1db34 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Mon Apr 18 23:16:00 2011 -0400 - - help/C, mallard: added stubs about plugins - - help/C/copy-paste.page | 9 +++- - help/C/figures/image-view-prefs.png | Bin 0 -> 38709 bytes - help/C/formats-more.page | 21 ---------- - help/C/formats-save.page | 4 +- - help/C/formats-view.page | 3 -- - help/C/introduction.page | 4 +- - ...{exif-digital.page => plugin-exif-digital.page} | 6 +-- - help/C/{exif-digital.page => plugin-map.page} | 6 +-- - help/C/{exif-digital.page => plugin-postr.page} | 6 +-- - ...xif-digital.page => plugin-python-console.page} | 8 ++-- - ...{exif-digital.page => plugin-send-by-mail.page} | 6 +-- - ...-digital.page => plugin-slideshow-shuffle.page} | 6 +-- - .../{exif-digital.page => plugin-zoom-width.page} | 6 +-- - help/C/preferences.page | 46 +++++++++++++++++++-- - help/C/slideshow.page | 18 ++------ - 15 files changed, 77 insertions(+), 72 deletions(-) - -commit 00b452e99c3f9200faf3c45d260584ee926969b1 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Mon Apr 18 17:17:09 2011 -0400 - - help/C/figures/ adding missing images - - help/C/figures/multiple-convert.png | Bin 0 -> 31050 bytes - help/C/figures/multiple-rename-count.png | Bin 0 -> 31295 bytes - 2 files changed, 0 insertions(+), 0 deletions(-) - -commit d16f0faf0d44ec9355672bce081a1a3e966e97ef -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Mon Apr 18 17:04:06 2011 -0400 - - help/C, mallard, new file - - help/C/delete.page | 27 +++++++++++++++++++++++++++ - help/C/image-edit.page | 2 +- - 2 files changed, 28 insertions(+), 1 deletion(-) - -commit 309db85c99eeca578d6b0ee54559f19e7f6acd70 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Mon Apr 18 16:52:28 2011 -0400 - - help/C, mallard: editing images section done. - - help/C/format-change.page | 2 +- - help/C/formats-view.page | 5 +++-- - help/C/image-edit.page | 15 ++++++++++---- - help/C/rename-multiple.page | 49 +++++++++++++++++++++++++++++++++++++++++++++ - help/C/save-multiple.page | 24 ---------------------- - 5 files changed, 64 insertions(+), 31 deletions(-) - -commit 3fa825e8bbdcc99e51565ca809a50f16b52a6546 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Mon Apr 18 14:50:40 2011 -0400 - - help/C, mallard": file conversion using eog. - - help/C/default-photo-editor.page | 33 ----------- - help/C/format-change.page | 67 ++++++++++++++++++++++ - help/C/{saving-changes.page => save-multiple.page} | 11 ++-- - 3 files changed, 72 insertions(+), 39 deletions(-) - -commit 17270f706318a2a7376ea9da542cb8325efc5f9b -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Mon Apr 18 03:36:47 2011 -0400 - - help/C,mallard: keyboardshortcuts/commanline done. - - help/C/commandline.page | 48 +++++++-- - help/C/desktop-background.page | 14 ++- - help/C/formats-save.page | 3 +- - help/C/keyboard-shortcuts.page | 29 ----- - help/C/shortcuts.page | 240 +++++++++++++++++++++++++++++++++++++++++ - 5 files changed, 292 insertions(+), 42 deletions(-) - -commit fc085ec4b9ff9e3a86466aeaffea1fad0104b32b -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sun Apr 17 19:00:50 2011 -0400 - - [mallard-docs] toolbar documented. - - help/C/figures/eog-toolbar-default.png | Bin 0 -> 17912 bytes - help/C/figures/eog-toolbar-editor.png | Bin 0 -> 28401 bytes - help/C/flip-rotate.page | 10 ++++---- - help/C/toolbar.page | 42 +++++++++++++++++++++++++++++---- - 4 files changed, 44 insertions(+), 8 deletions(-) - -commit d7a70380aa8d686ddf00944aa21dd14792bfdb95 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sun Apr 17 13:00:01 2011 -0400 - - [mallard]changes to intro page and link to help. - - help/C/format-change.page | 25 ----------- - help/C/formats-more.page | 21 +++++++++ - help/C/{saving-changes.page => formats-save.page} | 0 - help/C/index.page | 2 +- - help/C/introduction.page | 11 ++++- - help/C/saving-changes.page | 53 ++++++++++------------- - 6 files changed, 55 insertions(+), 57 deletions(-) - -commit ce445b0bd004759f2ca9763f29d31b87f969d09f -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sun Apr 17 06:11:07 2011 -0400 - - mallard-docs:how to set eog default image viewer. - - help/C/default.page | 44 ++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 44 insertions(+) - -commit f736fdee17e545c6d19bc3cdb7814d71609d6070 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sun Apr 17 04:19:47 2011 -0400 - - [mallard-docs] viewing section complete. - - help/C/exif-digital.page | 2 +- - help/C/index.page | 4 +++- - help/C/introduction.page | 2 +- - help/C/open.page | 13 +++++++------ - help/C/slideshow.page | 31 +++++++++++++++++++++++++++---- - help/C/view.page | 33 ++++++++++++++++++++++++--------- - help/C/zoom.page | 5 +++-- - 7 files changed, 66 insertions(+), 24 deletions(-) - -commit c0ef38a71f72db1dda7625068db7b82e7dca79d9 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Sat Apr 16 22:16:48 2011 -0400 - - [mallard-docs] work on 'viewing images' section. - - help/C/desktop-background.page | 26 ++++++++++++++ - help/C/figures/slideshow-prefs.png | Bin 0 -> 26145 bytes - help/C/{rotate.page => flip-rotate.page} | 24 ++++++++++--- - help/C/flip.page | 32 ----------------- - help/C/formats-view.page | 2 +- - help/C/image-open.page | 23 ------------- - help/C/open.page | 57 +++++++++++++++++++++++++++++++ - help/C/slideshow.page | 25 ++++++++++++++ - help/C/view.page | 46 +++++++++++++++++++++++++ - help/C/zoom.page | 2 +- - 10 files changed, 176 insertions(+), 61 deletions(-) - -commit 64e546230fc190eb24f59cc3359947a106288516 -Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> -Date: Sat Apr 16 19:39:27 2011 +0200 - - Updated Slovenian translation - - help/sl/sl.po | 682 +++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 360 insertions(+), 322 deletions(-) - -commit 3f5661cfe8141a3974e5998db6538fcbe2f2ea11 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Thu Apr 14 17:32:40 2011 -0400 - - [help/C]: added content to rotate and flip pages. - - Also, seperated supported formats for viewing and for saving. Fixed - copy/paste error in introduction page. - - help/C/flip.page | 12 +++++++--- - help/C/{formats.page => formats-view.page} | 14 ++---------- - help/C/introduction.page | 5 +++-- - help/C/rotate.page | 24 +++++++++++++++++--- - help/C/saving-changes.page | 36 +++++++++++++++++------------- - help/C/zoom.page | 2 +- - 6 files changed, 57 insertions(+), 36 deletions(-) - -commit e9c15525c8324a3145b53ed9ae9ea35e5db387e8 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Wed Apr 13 14:09:12 2011 -0400 - - help/C/: zoom.page completed, added screenshots. - - Added content to zoom.page, changed status to review. Changed icon, and - added screenshots to demonstrate toolbar use for zooming. Also, add - some content to toolbar.page - - help/C/figures/eog-bestfit.png | Bin 0 -> 63503 bytes - help/C/figures/eog-enlarge.png | Bin 0 -> 93637 bytes - help/C/figures/eog-normalsize.png | Bin 0 -> 82170 bytes - help/C/figures/eog-shrink.png | Bin 0 -> 92504 bytes - help/C/figures/eog.png | Bin 2330 -> 2189 bytes - help/C/toolbar.page | 1 + - help/C/zoom.page | 47 +++++++++++++++++++++++++++++++------- - 7 files changed, 40 insertions(+), 8 deletions(-) - -commit 9ec30ae9a87cc0b39ec42d26cc948e690e0730d8 -Author: Tiffany Antopolski <tiffany@antopolski.com> -Date: Mon Apr 11 02:36:38 2011 -0400 - - help: mallard topics stubbed out. - - help/C/bug-filing.page | 47 +++++++++++++++++++++++++++++++ - help/C/commandline.page | 26 ++++++++++++++++++ - help/C/copy-paste.page | 27 ++++++++++++++++++ - help/C/default-photo-editor.page | 33 ++++++++++++++++++++++ - help/C/exif-digital.page | 25 +++++++++++++++++ - help/C/figures/eog.png | Bin 0 -> 2330 bytes - help/C/flip.page | 26 ++++++++++++++++++ - help/C/format-change.page | 25 +++++++++++++++++ - help/C/formats.page | 58 +++++++++++++++++++++++++++++++++++++++ - help/C/image-edit.page | 24 ++++++++++++++++ - help/C/image-open.page | 23 ++++++++++++++++ - help/C/index.page | 48 ++++++++++++++++++++++++++++++++ - help/C/introduction.page | 24 ++++++++++++++++ - help/C/keyboard-shortcuts.page | 29 ++++++++++++++++++++ - help/C/preferences.page | 41 +++++++++++++++++++++++++++ - help/C/print-photo.page | 25 +++++++++++++++++ - help/C/print-settings.page | 25 +++++++++++++++++ - help/C/rotate.page | 26 ++++++++++++++++++ - help/C/saving-changes.page | 24 ++++++++++++++++ - help/C/toolbar.page | 35 +++++++++++++++++++++++ - help/C/zoom.page | 44 +++++++++++++++++++++++++++++ - 21 files changed, 635 insertions(+) - -commit 3869f5a265f5af337c8bedaed3df2cfa1674e62c -Author: Wouter Bolsterlee <wbolster@gnome.org> -Date: Sun Apr 10 22:51:11 2011 +0200 - - Updated Dutch translation by Wouter Bolsterlee - - po/nl.po | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 0dba6761b9c613e299a44135fa9871d764473927 -Author: Wouter Bolsterlee <wbolster@gnome.org> -Date: Sun Apr 10 22:26:09 2011 +0200 - - Updated Dutch translation by Wouter Bolsterlee - - po/nl.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit 788f52f7afcfa06cb7a5fd791a9923f3c3b0a453 -Author: Wouter Bolsterlee <wbolster@gnome.org> -Date: Sun Apr 10 22:21:50 2011 +0200 - - Updated Dutch translation by Wouter Bolsterlee - - po/nl.po | 211 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 107 insertions(+), 104 deletions(-) - -commit 08df0c62d0f67800bf0804eb56924a330c70c7f7 -Author: Gil Forcada <gforcada@gnome.org> -Date: Sun Apr 10 19:35:03 2011 +0200 - - [l10n]Updated Catalan translation - - po/ca.po | 13 ++++++++----- - 1 file changed, 8 insertions(+), 5 deletions(-) - -commit 5c328fa9833944dd690d12f8202248ddd9264d58 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sun Apr 10 11:52:14 2011 +0200 - - Updated Spanish translation - - po/es.po | 238 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 122 insertions(+), 116 deletions(-) - -commit 1ffac8145fc432f2afad5c5641b0b987247f928f -Author: Alexander Shopov <ash@kambanaria.org> -Date: Sun Apr 10 08:51:48 2011 +0300 - - Updated Bulgarian translation - - po/bg.po | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -commit 4be6ee9e811f473c75bb5f9d6cc55f7f9fab864c -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Sat Apr 9 19:03:17 2011 +0200 - - Updated Galician translations - - po/gl.po | 229 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 116 insertions(+), 113 deletions(-) - -commit f60a6851a1fb5c7e39fef3a542e9a524555fd62f -Author: Daniel Nylander <po@danielnylander.se> -Date: Sat Apr 9 16:25:58 2011 +0200 - - Updated Swedish translation - - po/sv.po | 254 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 128 insertions(+), 126 deletions(-) - -commit b4fefa4d98a8db91738da593e2101160fbd63465 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Apr 9 15:14:09 2011 +0200 - - Fix conflicting mnemonics in View menu - - https://bugzilla.gnome.org/show_bug.cgi?id=646360 - - src/eog-window.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit dbd91b21b9d549dfac8040c00e5737597c4c3536 -Author: Diego Escalante Urrelo <descalante@igalia.com> -Date: Sun Mar 13 18:50:58 2011 -0500 - - preferences-dialog: fix some rough edges - - - Make the GtkBox explicitely vertical - - Have the color pick buttons look similar (don't expand) - - Use GtkAlignment instead of hacky GtkLabels for padding - - Bug #646623 - - data/eog-preferences-dialog.ui | 390 ++++++++++++++++++----------------------- - 1 file changed, 175 insertions(+), 215 deletions(-) - -commit 9e1404983a866ef35ee3d424d4bca180a902f250 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Apr 9 15:15:14 2011 +0200 - - Drop old Glade UI files - - They are not used anymore and are out of sync with the GtkBuilder files - for quite some time now. - - data/eog-multiple-save-as-dialog.glade | 617 ----------------------- - data/eog-preferences-dialog.glade | 885 --------------------------------- - po/POTFILES.skip | 3 - - 3 files changed, 1505 deletions(-) - -commit 117193e1ea1fb3366a16c0ef0c4af9e8c7fc0a11 -Author: Timo Jyrinki <timo@debian.org> -Date: Wed Apr 6 10:39:40 2011 +0300 - - Updated Finnish help translation. - - help/fi/fi.po | 615 ++++++++++++++++++++++++++++++++++++++++------------------ - 1 file changed, 431 insertions(+), 184 deletions(-) - -commit 78e35afb4e1b8373e41d63f9c0e0282a922f8cc7 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Apr 5 00:30:28 2011 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a8d2a89e6e27f4bec7ef3ae93746d23e86dec906 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Apr 5 00:23:20 2011 +0200 - - Prepare for release 3.0.0 - - NEWS | 31 +++++++++++++++++++++++++++++++ - configure.ac | 6 +++--- - 2 files changed, 34 insertions(+), 3 deletions(-) - -commit 3cb602bc0c5a4a08c928cd1829cdbd1e4ce02bfe -Author: Baris Cicek <baris@teamforce.name.tr> -Date: Mon Apr 4 07:51:15 2011 +0300 - - Updated Turkish translation - - po/tr.po | 1117 +++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 661 insertions(+), 456 deletions(-) - -commit 1c0758cb9f068f8dbeed274d27e042c5b8d83764 -Author: Wolfgang Stöggl <c72578@yahoo.de> -Date: Sun Apr 3 20:12:52 2011 +0200 - - [l10n] Updated German translation, umlauts fixed - - po/de.po | 83 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 42 insertions(+), 41 deletions(-) - -commit e81ec6cafff1d10295562254a7ad2a2230b162a7 -Author: Jordi Serratosa <serratosa@gmail.com> -Date: Sat Apr 2 20:46:40 2011 +0200 - - [l10n]Fixes on Catalan translation - - po/ca.po | 228 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 114 insertions(+), 114 deletions(-) - -commit 17742d028ebb3d899bec9e2835282d15f8603d40 -Author: Marek Černocký <marek@manet.cz> -Date: Fri Apr 1 19:39:17 2011 +0200 - - Updated Czech translation - - help/cs/cs.po | 1804 +++++++++++++++++++++++++++++++++++++++++---------------- - 1 file changed, 1297 insertions(+), 507 deletions(-) - -commit f1cc6daa8784bea5b24b0fff154a96b85ea8344e -Author: Rajesh Ranjan <rranjan@redhat.com> -Date: Thu Mar 31 17:12:59 2011 +0530 - - hindi updated - - po/hi.po | 1170 ++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 689 insertions(+), 481 deletions(-) - -commit f5d03d9211b07f4b732f0899b97e3cb5a907aef7 -Author: Amitakhya Phukan <amitakhya@svn.gnome.org> -Date: Thu Mar 31 17:00:39 2011 +0530 - - Updated Assamese translations - - po/as.po | 1211 ++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 746 insertions(+), 465 deletions(-) - -commit 5931d6d452267d3770465d495e8499cc7823fe35 -Author: Милош Поповић <gpopac@gmail.com> -Date: Thu Mar 31 01:40:18 2011 +0200 - - Updated Serbian translation - - po/sr.po | 708 +++++++++++++++++++++++++++++---------------------------- - po/sr@latin.po | 708 +++++++++++++++++++++++++++++---------------------------- - 2 files changed, 720 insertions(+), 696 deletions(-) - -commit 2413c811f3ce099e7b918e11620ac67ea3cf5d8f -Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> -Date: Wed Mar 30 19:51:25 2011 +0200 - - Updated Basque language - - po/eu.po | 112 +++++++++++++-------------------------------------------------- - 1 file changed, 23 insertions(+), 89 deletions(-) - -commit 93e0c6eb19bd9aa0291c8415cb8a4923f7dd7953 -Author: Kenneth Nielsen <k.nielsen81@gmail.com> -Date: Mon Mar 28 23:15:27 2011 +0200 - - Updated Danish translation - - po/da.po | 526 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 272 insertions(+), 254 deletions(-) - -commit 9954caeb86a3ab31720bdf278492fab9b881eb5a -Author: Daniel Korostil <ted.korostiled@gmail.com> -Date: Mon Mar 28 20:51:38 2011 +0300 - - Uploaded Ukranian - - po/uk.po | 977 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 542 insertions(+), 435 deletions(-) - -commit 97928fd4fcafbd86bfb523d65f437784bcd028b0 -Author: Sweta Kothari <swkothar@redhat.com> -Date: Mon Mar 28 12:10:39 2011 +0530 - - Updated Gujarati Translations - - po/gu.po | 162 ++++++++++++++++----------------------------------------------- - 1 file changed, 41 insertions(+), 121 deletions(-) - -commit 4529e44997d5b26ce7c281e9655ceeeb14a6546e -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Mar 27 21:28:46 2011 +0200 - - Add description and updated maintainer entries to DOAP file - - eog.doap | 15 ++++++++++++--- - 1 file changed, 12 insertions(+), 3 deletions(-) - -commit 755243a1f4a56e3e8ed36a4d981b5dbcf93caadc -Author: Abduxukur Abdurixit <abdurixit@gmail.com> -Date: Sun Mar 27 19:19:29 2011 +0200 - - Added UG translation - - po/ug.po | 3326 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 1667 insertions(+), 1659 deletions(-) - -commit 13b7487bd4a26180b555e750c15e83e9927ca6ce -Author: Laco Gubík <lacogubik@gmail.com> -Date: Sun Mar 27 18:40:32 2011 +0200 - - Updated Slovak translation - - po/sk.po | 444 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 222 insertions(+), 222 deletions(-) - -commit c09a7eb557611e503e1ddee0d4febbd2de1c562e -Author: Dr.T.Vasudevan <agnihot3@gmail.com> -Date: Sun Mar 27 16:04:25 2011 +0530 - - Updated Tamil translation - - po/ta.po | 517 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 279 insertions(+), 238 deletions(-) - -commit 28b3535ca4f835182293d6d56988cb09cc8be3e1 -Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> -Date: Sun Mar 27 01:18:44 2011 +0700 - - Updated Vietnamese translation - - po/vi.po | 15 ++++++--------- - 1 file changed, 6 insertions(+), 9 deletions(-) - -commit a251e11166e25bd71d70599954e331be8b4856e7 -Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> -Date: Sun Mar 27 01:17:13 2011 +0700 - - po/vi.po: import from Damned Lies - - po/vi.po | 486 ++++++++++++++++++++++++++------------------------------------- - 1 file changed, 200 insertions(+), 286 deletions(-) - -commit cb25607a687e55bbaa81d57471bad54c4e23bca9 -Author: Friedel Wolff <friedel@translate.org.za> -Date: Fri Mar 25 00:26:26 2011 +0200 - - Update translation for Afrikaans (af) - - po/af.po | 1417 +++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 837 insertions(+), 580 deletions(-) - -commit c9ab6efa8d4d533206965d20f15d880f52acb90c -Author: Shankar Prasad <svenkate@redhat.com> -Date: Thu Mar 24 16:19:07 2011 +0530 - - Updated kn translations - - po/kn.po | 126 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 63 insertions(+), 63 deletions(-) - -commit 590e56b9bb0cce0be41cb2367176f10d0fa03705 -Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> -Date: Thu Mar 24 18:36:27 2011 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 307 +++++++++++++++++++++++++----------------------------------- - po/zh_TW.po | 307 +++++++++++++++++++++++++----------------------------------- - 2 files changed, 252 insertions(+), 362 deletions(-) - -commit c487504255e531c201907707878e7357ae7164fa -Author: Gianvito Cavasoli <gianvito@gmx.it> -Date: Wed Mar 23 11:40:04 2011 +0100 - - Updated Italian translation - - po/it.po | 625 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 297 insertions(+), 328 deletions(-) - -commit a84e438db5e710128eeaab70badcb963bc9a7ecd -Author: Krasimir Chonov <mk2616@abv.bg> -Date: Wed Mar 23 11:09:05 2011 +0200 - - Updated Bulgarian translation - - po/bg.po | 230 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 115 insertions(+), 115 deletions(-) - -commit ddfd8b5d34d99fbe623638b58d5e3e9e454b2c34 -Author: Runa Bhattacharjee <runab@redhat.com> -Date: Tue Mar 22 16:14:46 2011 +0530 - - Updated Bengali India Translation - - po/bn_IN.po | 1010 +++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 560 insertions(+), 450 deletions(-) - -commit 0f5e9735f36cd3811d59b42652f512932523cbc1 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Mar 21 21:44:22 2011 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c69d8e24a7e4c29cb0ec8a6abd52d8b9d11665a0 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Mar 21 21:39:06 2011 +0100 - - Prepare for release 2.91.92 - - NEWS | 32 ++++++++++++++++++++++++++++++++ - 1 file changed, 32 insertions(+) - -commit 45eae849fbc8793a0f8f862894bcb82995f49b54 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Mar 21 21:37:35 2011 +0100 - - Update required gsettings-desktop-schemas version - - This is to make sure the "picture-uri" key required by - commit 60a7e7b6 is present in the system. - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 60a7e7b6628b169c3cfde548322b5fe996cdec32 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Mar 10 20:33:23 2011 +0200 - - Update to the new "picture-uri" GSettings key - - https://bugzilla.gnome.org/show_bug.cgi?id=644417 - - src/eog-config-keys.h | 2 +- - src/eog-window.c | 5 ++++- - 2 files changed, 5 insertions(+), 2 deletions(-) - -commit ee00efdc226b03c39f2afd52d5f259fb4cb4a7c7 -Author: Rudolfs Mazurs <rudolfs.mazurs@gmail.com> -Date: Sun Mar 20 16:58:19 2011 +0200 - - Updated Latvian translation. - - po/lv.po | 436 ++++++++++++++++++++++++--------------------------------------- - 1 file changed, 167 insertions(+), 269 deletions(-) - -commit e98e49425230850c8f76c5b64ade0c7de979f4cf -Author: Dirgita <dirgitadevina@yahoo.co.id> -Date: Sun Mar 20 11:53:14 2011 +0700 - - Updated Indonesian translation - - po/id.po | 622 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 318 insertions(+), 304 deletions(-) - -commit bdc64098cdc1a05f594ea24510b5b165ecdf1c7d -Author: Wouter Bolsterlee <wbolster@gnome.org> -Date: Sat Mar 19 01:04:55 2011 +0100 - - Updated Dutch translation by Wouter Bolsterlee - - po/nl.po | 574 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 274 insertions(+), 300 deletions(-) - -commit f4cae9f0812685f3f3d483992fc38089171c015f -Author: Aron Xu <aronxu@gnome.org> -Date: Fri Mar 18 19:21:19 2011 +0800 - - Update Simplified Chinese translation. - - po/zh_CN.po | 21 ++++++++------------- - 1 file changed, 8 insertions(+), 13 deletions(-) - -commit 1234d1210a54922e0b4b9bc7150dc71bc74387ef -Author: Gintautas Miliauskas <gintautas@miliauskas.lt> -Date: Thu Mar 17 16:03:26 2011 +0100 - - Updated Lithuanian translation. - - po/lt.po | 719 +++++++++++++++++++++++++++------------------------------------ - 1 file changed, 310 insertions(+), 409 deletions(-) - -commit 873c8135f450c4f0b32634de9d95b83429e4c0c4 -Author: Claude Paroz <claude@2xlibre.net> -Date: Thu Mar 17 15:44:52 2011 +0100 - - Updated French help translation - - help/fr/fr.po | 691 +++++++++++++++++++++++++++------------------------------- - 1 file changed, 327 insertions(+), 364 deletions(-) - -commit 4c32882cc5d71ca7cc41e6843b4f36533d3ada68 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Mar 16 19:23:40 2011 +0100 - - Enable TotemScreensaver unconditionally - - It uses GDBus instead of libdbus now. It can be enabled even if - libdbus is not available as GDBus/GIO is always present. - - src/eog-application.c | 4 ---- - src/eog-application.h | 7 +------ - src/eog-window.c | 4 ---- - 3 files changed, 1 insertion(+), 14 deletions(-) - -commit 609e8f7079b804dfddc3196034e48b30e57cb0b7 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Mar 16 19:16:53 2011 +0100 - - Merge latest TotemScreensaver changes into eog's local copy - - This includes several bugfixes and makes eog use the Inhibitor-API - in gnome-session instead of gnome-screensaver. - - https://bugzilla.gnome.org/show_bug.cgi?id=644631 - - cut-n-paste/totem-screensaver/totem-scrsaver.c | 154 +++++++++++-------------- - 1 file changed, 67 insertions(+), 87 deletions(-) - -commit 07589d71c3a1e223f947385d38c4c9d38822e17b -Author: Fran Diéguez <fran@openhost.es> -Date: Tue Mar 15 20:22:11 2011 +0100 - - Updated Galician translations - - po/gl.po | 23 +++++++++++++---------- - 1 file changed, 13 insertions(+), 10 deletions(-) - -commit 2aeb02c2ababd2fe97aec6197866e2afbe99ff1a -Author: Marek Černocký <marek@manet.cz> -Date: Tue Mar 15 18:46:45 2011 +0100 - - Updated Czech translation - - po/cs.po | 328 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 156 insertions(+), 172 deletions(-) - -commit ea281a6e8f4bd83981d631ce1ad98831802de98a -Author: Shankar Prasad <svenkate@redhat.com> -Date: Tue Mar 15 16:25:49 2011 +0530 - - Updated kn translations - - po/kn.po | 887 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 521 insertions(+), 366 deletions(-) - -commit d52a7d988b3b249ad928cb9ce871e52214f752a3 -Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> -Date: Tue Mar 15 00:08:11 2011 +0900 - - Updated Japanese translation. - - po/ja.po | 15 +++++++++------ - 1 file changed, 9 insertions(+), 6 deletions(-) - -commit c76388b99f76a5760a7d85d863b0ad3fa6c97b8a -Author: Flamarion Jorge <jorge.flamarion@gmail.com> -Date: Mon Mar 14 11:34:25 2011 -0300 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 70 +++++++++++++++++++++++++++---------------------------------- - 1 file changed, 31 insertions(+), 39 deletions(-) - -commit 67be80e20c130ddc4c1ccca193ebfa17a1f4b03f -Author: Michael Kotsarinis <mk73628@gmail.com> -Date: Sun Mar 13 19:54:26 2011 +0200 - - l10n: Updated Greek translation - - po/el.po | 52 +++++++++++++++++++++++++++++----------------------- - 1 file changed, 29 insertions(+), 23 deletions(-) - -commit 14832e53cab203f963e74c2ffd4d350e5b3220fa -Author: Bruce Cowan <bruce@bcowan.me.uk> -Date: Sat Mar 12 18:54:19 2011 +0000 - - Updated British English translation - - po/en_GB.po | 565 ++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 303 insertions(+), 262 deletions(-) - -commit 62170f849cf362bc499d27248e0056826684e97b -Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> -Date: Sat Mar 12 03:15:10 2011 +0100 - - Updated Romanian translation - - po/ro.po | 15 ++++++--------- - 1 file changed, 6 insertions(+), 9 deletions(-) - -commit 0830f0b4df8e5e7fefa6c66b472aa6e7deb8bf4b -Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> -Date: Sat Mar 12 03:12:21 2011 +0100 - - Updated Romanian translation - - po/ro.po | 17 ++++++++--------- - 1 file changed, 8 insertions(+), 9 deletions(-) - -commit b743965e681edb8a426fc2336989a183a833fb81 -Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> -Date: Sat Mar 12 02:55:25 2011 +0100 - - Updated Romanian translation - - po/ro.po | 414 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 204 insertions(+), 210 deletions(-) - -commit a0295018bec5a74280d063c5ebb6e35e80165c56 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Mar 11 14:48:27 2011 +0100 - - Raise required libpeas version to 0.7.4 - - That version has and depens on everything eog needs - to get correctly working Python plugins. - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 581c17d94f3424aa5919a30bd857c35023d6a351 -Author: André Gondim <andregondim@ubuntu.com> -Date: Thu Mar 10 15:40:26 2011 -0300 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 863 +++++++++++++++++++++++++++++------------------------------- - 1 file changed, 413 insertions(+), 450 deletions(-) - -commit ba89069173b90cc86b39780aacf69042b9838b11 -Author: Piotr Drąg <piotrdrag@gmail.com> -Date: Wed Mar 9 19:15:27 2011 +0100 - - Updated Polish translation - - po/pl.po | 763 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 399 insertions(+), 364 deletions(-) - -commit 6a74092705a0fbd8135e02d361451aa251623aec -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Wed Mar 9 13:56:34 2011 +0100 - - Updated Hungarian translation - - po/hu.po | 601 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 286 insertions(+), 315 deletions(-) - -commit 95f8ae88ce1104a53ba19ac6ae258babf57f88d3 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Mar 8 16:04:29 2011 +0100 - - Fix NEWS entries for last release - - Somehow pushed an unfinished version of that file. - - NEWS | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 0d2a6c0c08ceeca6c26867d95a6f4cffb2a10d28 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Mar 8 15:52:11 2011 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b89549f0c0c8613955fc3c1b0f5cc8f75443430c -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Mar 8 15:49:07 2011 +0100 - - Prepare for release 2.91.91 - - NEWS | 32 ++++++++++++++++++++++++++++++++ - 1 file changed, 32 insertions(+) - -commit d1d6b9452acc874d1f46ca57f5695bf128acbf91 -Author: Steve Frécinaux <code@istique.net> -Date: Mon Mar 7 19:05:44 2011 +0100 - - Enable python support for plugins - - https://bugzilla.gnome.org/show_bug.cgi?id=639597 - - src/eog-plugin-engine.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -commit 8b45322ac9085f7f4d9bf942f66e8ec31581f5fd -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Tue Mar 8 14:52:43 2011 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 22 ++++++++++++++-------- - 1 file changed, 14 insertions(+), 8 deletions(-) - -commit d1da84198d50703006e747b56ef8ba5107f7f3bd -Author: Cosimo Cecchi <cosimoc@gnome.org> -Date: Mon Mar 7 09:32:38 2011 -0500 - - window: add the primary-toolbar style to the toolbar - - https://bugzilla.gnome.org/show_bug.cgi?id=644117 - - configure.ac | 2 +- - src/eog-window.c | 2 ++ - 2 files changed, 3 insertions(+), 1 deletion(-) - -commit 53ac8a0d48152530fb96cd39e743c1d64598a647 -Author: Yuri Myasoedov <omerta13@yandex.ru> -Date: Tue Mar 8 10:18:30 2011 +0300 - - Updated Russian translation - - po/ru.po | 357 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 169 insertions(+), 188 deletions(-) - -commit c9d9e426d22319be97d98c1668e75f9b6fdbee1e -Author: Duarte Loreto <happyguy_pt@hotmail.com> -Date: Sun Mar 6 18:40:13 2011 +0000 - - Updated Portuguese translation - - po/pt.po | 550 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 290 insertions(+), 260 deletions(-) - -commit e673bb798cd9624c012b4ff5da5ae8b2bfd31223 -Author: Rudolfs Mazurs <rudolfs.mazurs@gmail.com> -Date: Sat Mar 5 15:06:31 2011 +0200 - - Updated Latvian translation. - - po/lv.po | 929 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 513 insertions(+), 416 deletions(-) - -commit 76eeed4093c4eb8251991fc3f30dd0d6a579e148 -Author: A S Alam <aalam@users.sf.net> -Date: Sat Mar 5 07:00:51 2011 +0530 - - update Punjabi Translation by A S Alam - - po/pa.po | 547 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 276 insertions(+), 271 deletions(-) - -commit e91234247f6f88a048cc493090d8a18506750e08 -Author: Bruno Brouard <annoa.b@gmail.com> -Date: Wed Mar 2 13:38:49 2011 +0100 - - Updated French translation - - po/fr.po | 668 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 351 insertions(+), 317 deletions(-) - -commit b50d8780b0e5888fc7f326a31b4f78047bd42976 -Author: Daniel Nylander <po@danielnylander.se> -Date: Tue Mar 1 20:53:39 2011 +0100 - - Updated Swedish translation - - po/sv.po | 16 ++++++---------- - 1 file changed, 6 insertions(+), 10 deletions(-) - -commit 81bcaaeff17b64e25b487aedbbdf8dcbe8153e4d -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Tue Mar 1 18:21:22 2011 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - -commit c4b2d2e600919b4c7ca95cd3451c7473c2da70f4 -Author: Wei Li <lw124124@gmail.com> -Date: Tue Mar 1 12:01:57 2011 +0000 - - [l10n]Update Chinese (China) translations. - - po/zh_CN.po | 404 +++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 209 insertions(+), 195 deletions(-) - -commit d46b485c6a0bfe27b76c6414ee423242ba71ce91 -Author: Gil Forcada <gforcada@gnome.org> -Date: Tue Mar 1 00:42:13 2011 +0100 - - [l10n] Updated Catalan translation - - po/ca.po | 669 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 353 insertions(+), 316 deletions(-) - -commit 9e0cb3df0c1d9ef546b87534e25cc112f3dfc56f -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Sun Feb 27 22:52:56 2011 +0200 - - Updated Hebrew translation. - - po/he.po | 11 +++++++---- - 1 file changed, 7 insertions(+), 4 deletions(-) - -commit ef7ec539bff3bcf95f0d90d5426e8f2c1b4793d7 -Author: Ivar Smolin <okul@linux.ee> -Date: Sun Feb 27 19:21:07 2011 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 11 +++++++---- - 1 file changed, 7 insertions(+), 4 deletions(-) - -commit b4e6e4e66714a6ddf356bad160a0a12b42f725ab -Author: Mario Blättermann <mariobl@gnome.org> -Date: Sat Feb 26 20:58:52 2011 +0100 - - [l10n] Updated German translation - - po/de.po | 79 ++++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 42 insertions(+), 37 deletions(-) - -commit c11d73291ce0b980981dd2d6b3429b1219435640 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Sat Feb 26 19:17:37 2011 +0200 - - Small configure.ac format nitpick - - configure.ac | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -commit 0bb3712ced6e914121c30e1d54397291be153a4d -Author: Changwoo Ryu <cwryu@debian.org> -Date: Sat Feb 26 22:49:09 2011 +0900 - - Updated Korean translation - - po/ko.po | 658 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 349 insertions(+), 309 deletions(-) - -commit 7c06ad0ade5bd16af94bd2deaa096d6079d3676e -Author: Changwoo Ryu <cwryu@debian.org> -Date: Sun Sep 26 03:52:55 2010 +0900 - - Updated Korean translation - - po/ko.po | 511 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 278 insertions(+), 233 deletions(-) - -commit 477b3c0d290f5b4dc8fba0f4b348590553e18951 -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Fri Feb 25 20:31:39 2011 +0100 - - Updated Spanish translation - - po/es.po | 16 +++++++++------- - 1 file changed, 9 insertions(+), 7 deletions(-) - -commit b7c34b8c7c6845a4545eb6a43728d59024987faf -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Fri Feb 25 20:17:22 2011 +0100 - - Updated Slovenian translation - - po/sl.po | 47 ++++++++++++++++++++++++++++++++++++++--------- - 1 file changed, 38 insertions(+), 9 deletions(-) - -commit 39da43ff56ebcc1156cc642da5df112c720bccac -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Thu Feb 24 15:20:32 2011 +0200 - - Updated Arabic translation - - po/ar.po | 11 +++++++---- - 1 file changed, 7 insertions(+), 4 deletions(-) - -commit 38ca3f8221ddf074ff4701493f9e5e8e10c1cbb9 -Author: Matthias Clasen <mclasen@redhat.com> -Date: Thu Feb 24 13:39:14 2011 +0200 - - Bug 642969 - "Open Background Preferences" does not work - - src/eog-window.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit 82b08dab95227030b71c6a4ac1d974c31c21d801 -Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> -Date: Wed Feb 23 00:46:45 2011 +0900 - - Updated Japanese translation - - po/ja.po | 690 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 363 insertions(+), 327 deletions(-) - -commit 2abdb258e4460737a9be9880d389be9390d57442 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Feb 21 23:58:18 2011 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 3db7cad03560931bea7054ddb60cc4653d7d480f -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Feb 21 23:51:40 2011 +0100 - - Prepare for release 2.91.90 - - NEWS | 29 +++++++++++++++++++++++++++++ - 1 file changed, 29 insertions(+) - -commit 3cd416e89c53e208cc6a85a2dc4347d2072fc7fa -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sun Feb 20 14:56:13 2011 +0100 - - Updated Spanish translation - - help/es/es.po | 782 +++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 415 insertions(+), 367 deletions(-) - -commit e57cc7b0f3bcb509f07ed8d25601c132d4ab2159 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sun Feb 20 14:51:41 2011 +0100 - - Updated Spanish translation - - help/es/es.po | 790 +++++++++++++++++++++++++++------------------------------- - 1 file changed, 371 insertions(+), 419 deletions(-) - -commit 115c67b59047cf0a9a34d93c804056b6c2e34743 -Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> -Date: Thu Feb 17 14:51:49 2011 +0100 - - Updated Basque language - - po/eu.po | 33 ++++++++++++++++++--------------- - 1 file changed, 18 insertions(+), 15 deletions(-) - -commit c908967762671ef3d230d2da9641654e893d51a6 -Author: Alexander Shopov <ash@kambanaria.org> -Date: Wed Feb 16 22:29:31 2011 +0200 - - Updated Bulgarian translation - - po/bg.po | 34 +++++++++++++++++----------------- - 1 file changed, 17 insertions(+), 17 deletions(-) - -commit 64ffb683343d9af629671ea82c85f91130c3ea7d -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Feb 14 23:48:31 2011 +0100 - - Make setting the image view background color work again - - The color was assigned to the parent container and not - to the drawing area. That made it draw the default theme - background color all the time instead. - - src/eog-scroll-view.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 06d62c58d18a82974c6ef3d909d6056786015f23 -Author: Garrett Regier <alias301@gmail.com> -Date: Mon Feb 14 05:27:42 2011 -0800 - - Update to latest libpeas API changes - - Plugin loaders now must be enabled - not disabled. - - configure.ac | 4 ++-- - src/eog-plugin-engine.c | 4 +--- - src/eog-preferences-dialog.c | 2 +- - 3 files changed, 4 insertions(+), 6 deletions(-) - -commit 09902c9b2cd95a107121861104d5c29c6e835dca -Author: Sweta Kothari <swkothar@redhat.com> -Date: Mon Feb 14 15:21:07 2011 +0530 - - Updated Gujarati Translations - - po/gu.po | 1089 ++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 640 insertions(+), 449 deletions(-) - -commit 4975a3312afea6ca0d63d1e4274417f1bc201fae -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Sun Feb 13 14:03:24 2011 +0100 - - Updated Galician translations - - po/gl.po | 33 ++++++++++++++++++--------------- - 1 file changed, 18 insertions(+), 15 deletions(-) - -commit 30533d4140c33ae8f88a2d1472eacbf6b19ad258 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Sat Feb 12 20:37:15 2011 +0100 - - Updated Slovenian translation - - po/sl.po | 32 +++++++++++++++++--------------- - 1 file changed, 17 insertions(+), 15 deletions(-) - -commit 465b69f291fce62ec895fc4aa2e54b7b2ac32a9d -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sat Feb 12 14:42:38 2011 +0100 - - Updated Spanish translation - - po/es.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 72bbac443a1e77557b9109fcbe979afc246411b9 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sat Feb 12 14:38:22 2011 +0100 - - Updated Spanish translation - - po/es.po | 375 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 184 insertions(+), 191 deletions(-) - -commit 278e4cf75cb46dfdb2ac7e4c879f0c4716d62dc7 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Sat Feb 12 13:50:20 2011 +0100 - - Updated Norwegian bokmål translation. - - po/nb.po | 36 ++++++++++++++++++------------------ - 1 file changed, 18 insertions(+), 18 deletions(-) - -commit 5f093beca5b397684ad68204f2a8718328427197 -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Sat Feb 12 00:20:55 2011 +0200 - - Updated Hebrew translation. - - po/he.po | 372 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 183 insertions(+), 189 deletions(-) - -commit daaacb7d82b1797fda066fb16690a7df54ec29fa -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Feb 11 11:22:35 2011 +0100 - - [l10n] Updated German translation - - po/de.po | 39 +++++++++++++++++++++------------------ - 1 file changed, 21 insertions(+), 18 deletions(-) - -commit b23a2ba04cbb6f36e55bb7e74a0d0f829df78b43 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Feb 9 18:23:50 2011 +0100 - - Migrate GSettings schema paths to /org/gnome prefix - - Appears to be the "official" path. - - data/org.gnome.eog.gschema.xml.in.in | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit f86e8b86c9043c92904961e79e60b76891927072 -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Wed Feb 9 01:02:08 2011 +0200 - - Updated Arabic translation - - po/ar.po | 37 ++++++++++++++++++++----------------- - 1 file changed, 20 insertions(+), 17 deletions(-) - -commit 1d1c144dfa0e2d93f695c35048413512dd4cf1a2 -Author: Ivar Smolin <okul@linux.ee> -Date: Tue Feb 8 21:31:16 2011 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 73 +++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 38 insertions(+), 35 deletions(-) - -commit 63dc212c5e310cb04d5b3a3b88c957f9cdf0ef45 -Author: Daniel Nylander <po@danielnylander.se> -Date: Tue Feb 8 00:26:08 2011 +0100 - - Updated Swedish translation - - po/sv.po | 401 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 191 insertions(+), 210 deletions(-) - -commit c19f48f9fccf951fa7557c00635b529b7eb22211 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Feb 7 21:03:54 2011 +0100 - - Remove specific file format filters from "Open Image"-dialog - - Simplify filter list to either show all files or just the supported - image files in a folder. Also fix list capitalization. Fixes bug 641107. - - src/eog-file-chooser.c | 66 +++++++++++++++++++++++++++++--------------------- - 1 file changed, 38 insertions(+), 28 deletions(-) - -commit c2eb7259cad5d264c0d6c1c5aa8b7c403b472252 -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Sat Feb 5 10:15:03 2011 +0100 - - Updated Spanish translation - - help/es/es.po | 780 +++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 414 insertions(+), 366 deletions(-) - -commit 3859553433838e97367e7678f9da4ba2bcc7f973 -Author: Cosimo Cecchi <cosimoc@gnome.org> -Date: Fri Feb 4 12:00:14 2011 -0500 - - all: fix build warnings with GCC 4.6 - - https://bugzilla.gnome.org/show_bug.cgi?id=641519 - - cut-n-paste/toolbar-editor/egg-toolbars-model.c | 2 +- - src/eog-exif-details.c | 8 ------- - src/eog-jobs.c | 19 --------------- - src/eog-list-store.c | 1 + - src/eog-print-preview.c | 5 ---- - src/eog-scroll-view.c | 6 ----- - src/eog-window.c | 31 +------------------------ - 7 files changed, 3 insertions(+), 69 deletions(-) - -commit 7328d804bc23a4df5bb9c9cbf82990f831aaaaa5 -Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> -Date: Thu Feb 3 13:53:13 2011 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 359 ++++++++++++++++++++++++++++++------------------------------ - po/zh_TW.po | 359 ++++++++++++++++++++++++++++++------------------------------ - 2 files changed, 362 insertions(+), 356 deletions(-) - -commit 0851445abda10766cf938e29403b2bee6773f770 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jan 31 23:09:27 2011 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a2654493d20bb2cf5006f60c8f5822982c4d6725 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jan 31 23:05:22 2011 +0100 - - Prepare for release 2.91.7 - - NEWS | 27 +++++++++++++++++++++++++++ - 1 file changed, 27 insertions(+) - -commit c016eab127937dfbf5bf366b231fb4ed73146a6f -Author: Mario Blättermann <mariobl@gnome.org> -Date: Mon Jan 31 20:05:23 2011 +0100 - - [l10n] Updated German doc translation - - help/de/de.po | 1021 +++++++++++++++++---------------------------------------- - 1 file changed, 294 insertions(+), 727 deletions(-) - -commit f2163734201909ed18d42b7cdcce527090f9083b -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 21:51:08 2011 +0100 - - Correct the menupaths in the help manual to match the UI - - Also remove some now-invalid paragraphs and keyboard shortcuts. - Fixes bug 628547. - - help/C/eog.xml | 56 ++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 30 insertions(+), 26 deletions(-) - -commit a2955464b8320ee7b8e39c6f022820d3b36ec144 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 21:14:47 2011 +0100 - - Fix introspection scanner warning - - src/eog-properties-dialog.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 7eeb6c8c0e55a3ad954cde4a6fed91ea7f89691c -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 21:12:11 2011 +0100 - - Use g_irepository_require_private to load eog's private typelib - - src/eog-plugin-engine.c | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - -commit 659f39063eb4f9af046cb5991e887bdf3c20e62f -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 21:04:16 2011 +0100 - - Stop message area constructors from being introspected - - In their current form they are not introspected correctly yet. - - src/eog-error-message-area.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit ca255572d4e2f805d274daca07cdb4ec3b960cc8 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 20:43:11 2011 +0100 - - Further API doc warning fixes - - doc/reference/eog-sections.txt | 3 +++ - src/eog-list-store.c | 3 +-- - 2 files changed, 4 insertions(+), 2 deletions(-) - -commit 46755d7788fbe30906d2e74192401a25c9f920ff -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 20:17:20 2011 +0100 - - Remove chapters of dropped plugin classes from API docs - - doc/reference/eog-docs.sgml.in | 2 -- - 1 file changed, 2 deletions(-) - -commit d43c0e64d5c002385efaf95af956ff11c820ca54 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 20:13:16 2011 +0100 - - Remove Microtile Array stuff from API docs - - It's not in the build anymore and wasn't public anyway. - - doc/reference/eog-docs.sgml.in | 1 - - doc/reference/eog-sections.txt | 9 --------- - 2 files changed, 10 deletions(-) - -commit b940fc67bec4af041735f9e925ca832b6d462299 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 20:10:37 2011 +0100 - - Drop Microtile Array functions from build - - They are not used anymore in the new cairo-based drawing code. - - src/Makefile.am | 2 -- - 1 file changed, 2 deletions(-) - -commit 8db7761ea28a9c214fe02dd4aca9c25166eded68 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 20:09:08 2011 +0100 - - Disable more of the old drawing code - - We apparently didn't disable everything in the first run. - - src/eog-scroll-view.c | 14 +++++++++++--- - 1 file changed, 11 insertions(+), 3 deletions(-) - -commit 938e27dd740c4a08f09a47176fccc92fe2873c78 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 19:45:51 2011 +0100 - - Sort file lists in Makefile.am alphabetically - - Makes them easier to parse by humans. - - src/Makefile.am | 95 +++++++++++++++++++++++++++++---------------------------- - 1 file changed, 48 insertions(+), 47 deletions(-) - -commit a9029cb760020d0de65e32910f2e707c8fb19198 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 30 19:38:53 2011 +0100 - - Put EogClipboardHandler into the public API - - This could be useful to plugin authors. - - src/Makefile.am | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b4e2777aa1ead74ac748280bfd12c17ffa29779a -Author: Mahyar Moghimi <mahyar.moqimi@gmail.com> -Date: Fri Jan 28 15:41:05 2011 +0330 - - Updating Persian Translation - - po/fa.po | 1963 ++++++++++++++++++++++++++++++++++++++++++++------------------ - 1 file changed, 1386 insertions(+), 577 deletions(-) - -commit 6ac6beff4408e15fffb834aaa4b182a61bf65cdd -Author: Yanko Kaneti <yaneti@declera.com> -Date: Fri Jan 28 00:44:22 2011 +0200 - - Fix fullscreen schema key typo - - data/org.gnome.eog.gschema.xml.in.in | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 37eab9a38e401f61f64b52593fd65fb28df45b79 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Thu Jan 27 00:01:48 2011 +0100 - - QA of Galician translations - - po/gl.po | 41 +++++++++++++++++++++-------------------- - 1 file changed, 21 insertions(+), 20 deletions(-) - -commit 2b60c03f2d3b719518bd1f0b3aff8fedb2fef024 -Author: Marek Černocký <marek@manet.cz> -Date: Wed Jan 26 13:07:07 2011 +0100 - - Updated Czech translation - - po/cs.po | 654 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 362 insertions(+), 292 deletions(-) - -commit 05f90d5feac588437d0614896f2c57e93059ec4b -Author: Diego Escalante Urrelo <descalante@igalia.com> -Date: Wed Jan 19 01:15:49 2011 -0500 - - Fix gdk target detection for gdk-3.0 - - Bug #639921 - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit edda3a87ea4e7c33044378a35177d6847b7f0d09 -Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> -Date: Fri Jan 21 00:11:10 2011 +0100 - - Updated Basque language - - po/eu.po | 646 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 340 insertions(+), 306 deletions(-) - -commit aacff55b1ab4616f58fe564b6343480c6745a217 -Author: Yuri Myasoedov <omerta13@yandex.ru> -Date: Thu Jan 20 21:46:08 2011 +0300 - - Updated Russian translation - - po/ru.po | 636 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 291 insertions(+), 345 deletions(-) - -commit cec5aba711a058d43f77c4078511994964782087 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Sat Jan 15 21:06:24 2011 +0100 - - Updated Slovenian translation - - po/sl.po | 375 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 182 insertions(+), 193 deletions(-) - -commit 12ca3ebe41500cbc5bf933a29c64cd3ce365c070 -Author: Michael Kotsarinis <mk73628@gmail.com> -Date: Sat Jan 15 10:52:11 2011 +0200 - - Updated Greek translation - - help/el/el.po | 1335 ++++++++++++++------------------------------------------- - 1 file changed, 321 insertions(+), 1014 deletions(-) - -commit 0e7b17fa4b3ddf2de44fcef274a207eb2c6d7fe3 -Author: Michael Kotsarinis <mk73628@gmail.com> -Date: Sat Jan 15 10:51:55 2011 +0200 - - Updated Greek translation - - po/el.po | 632 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 333 insertions(+), 299 deletions(-) - -commit e4bbeec5ac4d4d6ab50d2225ab3e28fda2b2fce9 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jan 14 17:32:18 2011 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b2f4fc513c89c276e4bb30b9223e8a154e2a588a -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jan 14 17:27:19 2011 +0100 - - Prepare for release 2.91.6 - - NEWS | 34 +++++++++++++++++++++++++++++++++- - 1 file changed, 33 insertions(+), 1 deletion(-) - -commit 032e169d7d6e4645a10af5291d1badc38e682089 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jan 14 16:53:15 2011 +0100 - - Remove old python binding code and build configuration - - Although python plugins are not yet supported with the new libpeas-based - API, the old binding don't work either and aren't needed any more. - - Makefile.am | 2 +- - README | 5 +- - bindings/Makefile.am | 7 - - bindings/python/Makefile.am | 77 --- - bindings/python/eog.defs | 1230 ------------------------------------------ - bindings/python/eog.override | 126 ----- - configure.ac | 116 ---- - doc/reference/Makefile.am | 4 +- - src/Makefile.am | 25 - - src/eog-python-module.c | 527 ------------------ - src/eog-python-module.h | 72 --- - src/eog-python-plugin.c | 282 ---------- - src/eog-python-plugin.h | 55 -- - 13 files changed, 4 insertions(+), 2524 deletions(-) - -commit 200ff4ea06b05554c349d5321f25b087c078cf33 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jan 14 16:38:29 2011 +0100 - - Use G_DEFINE_INTERFACE for EogMetadataReader - - src/eog-metadata-reader.c | 90 +++++++++++++++++++---------------------------- - 1 file changed, 36 insertions(+), 54 deletions(-) - -commit 9ae71ccc6a0ef2970185333b59bd26f29ea57fa4 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Fri Jan 14 00:53:16 2011 +0200 - - Remove unneeded finalize() from EogListStore - - No need to free() the private struct, since it's done automatically by - the type. - - src/eog-list-store.c | 14 -------------- - 1 file changed, 14 deletions(-) - -commit f581d73a424f8b70a33389c30e62a53dfbc8fbe0 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Fri Jan 14 00:48:10 2011 +0200 - - Remove unused finalize/destroy methods from thumbview - - src/eog-thumb-view.c | 23 ----------------------- - 1 file changed, 23 deletions(-) - -commit a395e95c5df2c4cbae9ce749544ec62820746e40 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Fri Jan 14 00:46:39 2011 +0200 - - Update the thumbview visible range in an idle callback - - This avoids entering in an infinite loop of unsetting a thumbnail, - relayouting the iconview, updating the adjustment, setting the - thumbnail, relayouting the iconview, updating the adjustment, - unsetting the thumbnail, and so on. - - Fixes bug #639312 - - src/eog-thumb-view.c | 69 +++++++++++++++++++++++++++++----------------------- - 1 file changed, 38 insertions(+), 31 deletions(-) - -commit fb279597bdc2a977bf29732a879468eca1be013a -Author: Alexander Shopov <ash@kambanaria.org> -Date: Thu Jan 13 22:51:27 2011 +0200 - - Updated Bulgarian translation - - po/bg.po | 438 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 219 insertions(+), 219 deletions(-) - -commit 0b98b8cc1903142112dd67ecde6a914583087da5 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Jan 11 00:11:53 2011 +0200 - - Workaround GtkIconView breakage - - By moving initialization code to the constructed() method. See #639139. - - src/eog-thumb-view.c | 129 ++++++++++++++++++++++++++++++++------------------- - 1 file changed, 80 insertions(+), 49 deletions(-) - -commit eae06a9c624b2c8bde332aa6ea8d5b64c631687b -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Wed Jan 12 11:35:02 2011 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 328 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 149 insertions(+), 179 deletions(-) - -commit 3223f831063c1fb0159e1d087c6db8140a59eb10 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 9 21:57:58 2011 +0100 - - Remove now unneeded header includes from EogPluginEngine - - These were not needed anymore after switching to libpeas. - - src/eog-plugin-engine.c | 9 --------- - 1 file changed, 9 deletions(-) - -commit 8b3e4ba3dbbe7a8b6e48a1f962e27352b8682991 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 9 21:55:12 2011 +0100 - - Disable python and seed plugin loaders for now - - They are not working very well with eog yet. - For example they prevent eog from quitting. - - src/eog-plugin-engine.c | 5 +++++ - 1 file changed, 5 insertions(+) - -commit b52e2584a1ce5e94b5824f0cae5d00a9d0ee87e1 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 9 21:33:26 2011 +0100 - - Remove deprecated comment - - src/eog-plugin-engine.c | 1 - - 1 file changed, 1 deletion(-) - -commit 1e53ed9d0eb1274c4c459b2c208af9a41e233b6a -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Sun Jan 9 16:47:34 2011 +0100 - - Updated Galician translations - - po/gl.po | 382 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 193 insertions(+), 189 deletions(-) - -commit 2ce756ca0d3a773e7b35bc12d4283ba69622a941 -Author: Andika Triwidada <andika@gmail.com> -Date: Sat Jan 8 18:17:20 2011 +0700 - - Updated Indonesian translation - - po/id.po | 846 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 411 insertions(+), 435 deletions(-) - -commit 98ea2625623db8b3328e5819658e505cdccd88b5 -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Sat Jan 8 08:37:07 2011 +0200 - - Updated Arabic translation - - po/ar.po | 496 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 253 insertions(+), 243 deletions(-) - -commit 95694f8b5f06b891a5e55356451ad60b53387563 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jan 3 21:24:45 2011 +0100 - - Fix a forgotten PeasUI-to-PeasGtk conversion and report errors - - - Print warnings when typelibs cannot be loaded. - - Try to load PeasGtk not PeasUI - - src/eog-plugin-engine.c | 26 ++++++++++++++++++++------ - 1 file changed, 20 insertions(+), 6 deletions(-) - -commit 80c6f9226aa3c7b959a18998c9bc102ece43cf50 -Author: Paul Seyfert <pseyfert@mathphys.fsk.uni-heidelberg.de> -Date: Mon Jan 3 21:57:36 2011 +0100 - - [l10n] Updated German translation - - po/de.po | 362 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 184 insertions(+), 178 deletions(-) - -commit acfc27561aff9f97126442d9522a53f51e9b871f -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 30 21:22:13 2010 +0200 - - Add an annotation glossary to the docs - - doc/reference/eog-docs.sgml.in | 1 + - 1 file changed, 1 insertion(+) - -commit e6a784eabc3d902a11d295a25c53927d7e3f014d -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 30 20:41:54 2010 +0200 - - Add GI annotations and API documents where relevant - - This suppresses many warnings during the gir file generation - - src/eog-application.c | 6 +++--- - src/eog-error-message-area.c | 17 +++++++++++++++++ - src/eog-image.c | 40 ++++++++++++++++++++++++++++++++++++++++ - src/eog-list-store.c | 2 +- - src/eog-properties-dialog.c | 11 +++++++++++ - src/eog-thumb-view.c | 4 ++-- - src/eog-thumbnail.c | 28 ++++++++++++++++++++++++++++ - src/eog-transform.c | 27 +++++++++++++++++++++++++++ - src/eog-window.c | 16 ++++++++-------- - 9 files changed, 137 insertions(+), 14 deletions(-) - -commit cddb3588d5982595ce7e230ea0e045454da8ff90 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Jan 3 18:52:29 2011 +0200 - - gtk-doc janitoring - - doc/reference/eog-docs.sgml.in | 2 + - doc/reference/eog-sections.txt | 142 ++++++++++++++++++++++------------------- - src/eog-exif-util.c | 2 +- - src/eog-util.h | 2 +- - 4 files changed, 81 insertions(+), 67 deletions(-) - -commit 77b5f2163a77f1b0eafaf8279e3fb8cefd54c88d -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jan 3 13:49:33 2011 +0100 - - Raise EOG_API_VERSION to 3.0 - - To distinguish the current API from the old API version (2.20). - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 3d3d2bb6c997ee1f72fb9f3625380fb1e5f97b7a -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jan 3 13:41:44 2011 +0100 - - Update plugins to use EogWindowActivatable interface - - https://bugzilla.gnome.org/show_bug.cgi?id=626091 - - plugins/fullscreen/eog-fullscreen-plugin.c | 37 ++++++++-------- - plugins/fullscreen/eog-fullscreen-plugin.h | 5 ++- - plugins/reload/eog-reload-plugin.c | 34 ++++++++------- - plugins/reload/eog-reload-plugin.h | 3 +- - plugins/statusbar-date/eog-statusbar-date-plugin.c | 50 +++++++++++----------- - plugins/statusbar-date/eog-statusbar-date-plugin.h | 5 ++- - 6 files changed, 73 insertions(+), 61 deletions(-) - -commit f984f253e50e842b7c58b41593954553798f3f95 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Aug 9 01:15:17 2010 +0300 - - Load the Eog namespace from a private directory - - For now, this is done by adding the private directory to the search - path. For whatever reason, g_irepository_require_private() doesn't - work for me. - - This is enough to have python plugins working already - - https://bugzilla.gnome.org/show_bug.cgi?id=626224 - - src/Makefile.am | 3 ++- - src/eog-plugin-engine.c | 15 +++++++++++++++ - 2 files changed, 17 insertions(+), 1 deletion(-) - -commit 397a6a5399aa7e68469e18387de5e40f3875c440 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 2 23:54:13 2011 +0100 - - Add our own activatable interface to EogWindow - - Improves typesafety by explicitly passing the EogWindow and allows - us to extend the interface if necessary. - - https://bugzilla.gnome.org/show_bug.cgi?id=626091 - - src/Makefile.am | 2 ++ - src/eog-window-activatable.c | 86 ++++++++++++++++++++++++++++++++++++++++++++ - src/eog-window-activatable.h | 68 +++++++++++++++++++++++++++++++++++ - src/eog-window.c | 6 ++-- - 4 files changed, 160 insertions(+), 2 deletions(-) - -commit f457e6cd2f9b25194145681109ae4bd7f3b4ee7f -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 23 16:27:13 2010 +0200 - - Dont use EogExifData in the C api - - https://bugzilla.gnome.org/show_bug.cgi?id=626257 - - plugins/statusbar-date/eog-statusbar-date-plugin.c | 2 +- - src/eog-exif-util.c | 2 ++ - src/eog-exif-util.h | 8 ++++---- - src/eog-image.c | 4 ++-- - src/eog-image.h | 2 +- - src/eog-metadata-reader.c | 4 ++-- - src/eog-metadata-reader.h | 2 +- - src/eog-properties-dialog.c | 2 +- - 8 files changed, 14 insertions(+), 12 deletions(-) - -commit d3ee0241723db6729cb7331428293c9dc95e8cdd -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 23 16:28:08 2010 +0200 - - Don't make enum types internal - - https://bugzilla.gnome.org/show_bug.cgi?id=626257 - - src/eog-enum-types.h.template | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b316c9e0b30a8c6d67feb8f21a20268e18c8cc3d -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Aug 9 00:55:11 2010 +0300 - - Add the necessary machinery to generate the introspection data from eog - - Annotations are still missing, but this provides enough for basic - introspection usage - - https://bugzilla.gnome.org/show_bug.cgi?id=626257 - - configure.ac | 11 +++++++++++ - src/Makefile.am | 44 ++++++++++++++++++++++++++++++++++++-------- - src/main.c | 6 ++++++ - 3 files changed, 53 insertions(+), 8 deletions(-) - -commit fe429c101581207918938079e8e8852c495fd6f6 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jan 3 00:21:07 2011 +0100 - - Update to latest git.mk from Pango - - git.mk | 17 +++++++++++++++-- - 1 file changed, 15 insertions(+), 2 deletions(-) - -commit af184104018f36272ff8e49012c52d503f48eae7 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 2 22:48:28 2011 +0100 - - Adapt POTFILES list to the plugin system changes - - https://bugzilla.gnome.org/show_bug.cgi?id=626091 - - po/POTFILES.in | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - -commit 8b0acfddc52c220393770a9895b6b56cab7821fd -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 2 22:27:10 2011 +0100 - - Fix broken application shutdown with new plugin system - - The PeasExtensionSet was basically keeping a reference to the window - preventing it from being destroyed correctly. Then the plugins leaked a - reference to the window as well. - - https://bugzilla.gnome.org/show_bug.cgi?id=626091 - - plugins/fullscreen/eog-fullscreen-plugin.c | 15 +++++++--- - plugins/reload/eog-reload-plugin.c | 15 +++++++--- - plugins/statusbar-date/eog-statusbar-date-plugin.c | 15 +++++++--- - src/eog-window.c | 35 +++++++++++----------- - 4 files changed, 50 insertions(+), 30 deletions(-) - -commit 40bedbf33812e65f4a8e79691b1fadfaace94035 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 2 21:51:03 2011 +0100 - - More fixes to work with libpeas-0.7 - - - Plugin keyfile extension and content was simplified - - Remove unneeded and broken libpeasui includes - - Search paths are no longer a constructor property - - https://bugzilla.gnome.org/show_bug.cgi?id=626091 - - plugins/Makefile.am | 10 +++++----- - ...gin.desktop.in => fullscreen.plugin.desktop.in} | 2 +- - plugins/reload/eog-reload-plugin.c | 1 - - ...-plugin.desktop.in => reload.plugin.desktop.in} | 2 +- - plugins/statusbar-date/eog-statusbar-date-plugin.c | 1 - - ...desktop.in => statusbar-date.plugin.desktop.in} | 3 +-- - src/eog-plugin-engine.c | 22 +++++++++++----------- - 7 files changed, 19 insertions(+), 22 deletions(-) - -commit cf39e40b422dad061184ac67028661bd4dcb0106 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Wed Aug 4 17:00:41 2010 +0300 - - Port the existing plugins to libpeas - - https://bugzilla.gnome.org/show_bug.cgi?id=626091 - - plugins/fullscreen/eog-fullscreen-plugin.c | 122 ++++++++++------ - plugins/fullscreen/eog-fullscreen-plugin.h | 12 +- - plugins/reload/eog-reload-plugin.c | 142 ++++++++++++------- - plugins/reload/eog-reload-plugin.h | 14 +- - plugins/statusbar-date/eog-statusbar-date-plugin.c | 154 +++++++++++++-------- - plugins/statusbar-date/eog-statusbar-date-plugin.h | 13 +- - 6 files changed, 293 insertions(+), 164 deletions(-) - -commit 9afc5483b615039a580e295fe08d7b8ec524759c -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 2 20:24:34 2011 +0100 - - Update plugin engine code to work with libpeas-0.7 - - - PeasPluginEngine lost the "app-name" property - - libpeasui became libpeas-gtk - - https://bugzilla.gnome.org/show_bug.cgi?id=626091 - - configure.ac | 4 ++-- - src/eog-plugin-engine.c | 1 - - src/eog-preferences-dialog.c | 5 ++--- - 3 files changed, 4 insertions(+), 6 deletions(-) - -commit 1f79c321367c91c8e9063f1343a7e4ce4199c4d5 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Wed Aug 4 16:55:34 2010 +0300 - - Port the plugin system to use libpeas - - This removes the internal implementation of EogPlugin, - EogPluginManager, EogModule, and EogPluginEngine in favor of the - implementation in libpeas and libpeasui. - - https://bugzilla.gnome.org/show_bug.cgi?id=626091 - - configure.ac | 4 +- - src/Makefile.am | 8 +- - src/eog-application.c | 5 + - src/eog-application.h | 2 + - src/eog-module.c | 167 -------- - src/eog-module.h | 72 ---- - src/eog-plugin-engine.c | 929 +++---------------------------------------- - src/eog-plugin-engine.h | 73 +--- - src/eog-plugin-manager.c | 917 ------------------------------------------ - src/eog-plugin-manager.h | 61 --- - src/eog-plugin.c | 108 ----- - src/eog-plugin.h | 222 ----------- - src/eog-preferences-dialog.c | 5 +- - src/eog-window.c | 46 ++- - src/main.c | 3 - - 15 files changed, 125 insertions(+), 2497 deletions(-) - -commit 3fd1cbb9910af433100d8d4b120158a7c8fc2784 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 2 20:00:53 2011 +0100 - - Add some API docs to EogScrollView's enum types - - src/eog-scroll-view.c | 2 +- - src/eog-scroll-view.h | 19 +++++++++++++++++++ - 2 files changed, 20 insertions(+), 1 deletion(-) - -commit 1ed726c98867a2f8a89998d18867067d148e6bf3 -Author: Daniel Nylander <po@danielnylander.se> -Date: Sun Jan 2 21:56:04 2011 +0100 - - Updated Swedish translation - - po/sv.po | 692 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 402 insertions(+), 290 deletions(-) - -commit cba590eb29b14250fc2934c9b3c3de0b62a244b4 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Sun Jan 2 18:33:10 2011 +0100 - - Updated Norwegian bokmål translation from Torstein Adolf Winterseth - - po/nb.po | 288 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 149 insertions(+), 139 deletions(-) - -commit 503b3bffb3a83b23fdaeb78016049715911cb03e -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Sun Jan 2 18:44:56 2011 +0200 - - Updated Hebrew translation. - - po/he.po | 238 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 123 insertions(+), 115 deletions(-) - -commit f149234b44be6d9e6b2c7abf14f04a04195069d2 -Author: Ivar Smolin <okul@linux.ee> -Date: Sat Jan 1 23:09:15 2011 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 20 +++++++++++++------- - 1 file changed, 13 insertions(+), 7 deletions(-) - -commit 5b1317375f7079c1bca69cfd48b3bc7a236d4b72 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sat Jan 1 12:50:47 2011 +0100 - - Updated Spanish translation - - po/es.po | 244 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 127 insertions(+), 117 deletions(-) - -commit 031908baeeac94a398e44e53253ee8454f834242 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Dec 31 18:30:12 2010 +0100 - - Unite copy to clipboard functions in a single menu entry - - Also assign a shortcut and icon to it. - - data/eog-ui.xml | 3 --- - src/eog-window.c | 38 ++------------------------------------ - 2 files changed, 2 insertions(+), 39 deletions(-) - -commit dcb56b03e9c9282138b9da94eddcedfc401ab750 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Dec 31 18:21:45 2010 +0100 - - Allow handling multiple clipboard data formats from one menu entry - - The new class "snapshots" the required data from the given EogImage - and keeps it around for clipboard usage until the clipboard gets reset. - - src/Makefile.am | 2 + - src/eog-clipboard-handler.c | 325 ++++++++++++++++++++++++++++++++++++++++++++ - src/eog-clipboard-handler.h | 63 +++++++++ - src/eog-window.c | 10 +- - 4 files changed, 395 insertions(+), 5 deletions(-) - -commit 0b209b1ff16e863e60a1d86413aa57c5fbde76b0 -Author: Adrian Hands <handsadrian@gmail.com> -Date: Fri Dec 31 14:34:58 2010 +0100 - - Add Copy Image and Copy Path to clipboard functionality - - Fixes bug 78514. - - data/eog-ui.xml | 9 ++++++++ - src/eog-window.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 72 insertions(+) - -commit 45488632bf62cd6891a41c81fcbe4c8a68d55555 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 30 21:14:47 2010 +0200 - - Add a appendix to the main reference document - - doc/reference/eog-docs.sgml.in | 139 ++++++++++++++++++++++------------------- - 1 file changed, 75 insertions(+), 64 deletions(-) - -commit 2def5c1918f1e59647b161b8991bc67a2127f63f -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 30 20:58:47 2010 +0200 - - Small code fix - - src/eog-image.c | 4 +--- - 1 file changed, 1 insertion(+), 3 deletions(-) - -commit ae39227b82978abf2b69baff0e46d8bba8d3474e -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 30 20:58:32 2010 +0200 - - Improve the API consistency in EogImageSaveInfo - - This will make things better for introspection - - doc/reference/eog-sections.txt | 6 +++--- - src/eog-image-save-info.c | 11 ++++------- - src/eog-image-save-info.h | 17 ++++++++++------- - src/eog-jobs.c | 12 ++++++------ - 4 files changed, 23 insertions(+), 23 deletions(-) - -commit 4dff15d5c532153176489ed598d24bda2a4d936c -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Tue Dec 28 23:30:55 2010 +0100 - - Updated Slovenian translation - - po/sl.po | 277 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 141 insertions(+), 136 deletions(-) - -commit 943a59737c800801055478fb4b6db1493e376fee -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Dec 28 13:19:50 2010 +0100 - - Fix EogPrintImageSetupPrivate type naming/typedefing to make sense - - src/eog-print-image-setup.c | 2 +- - src/eog-print-image-setup.h | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit 1f295282f171496d59eb850a8f49d5d7644fb658 -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Sun Dec 26 19:53:32 2010 +0200 - - Updated Hebrew translation. - - po/he.po | 272 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 138 insertions(+), 134 deletions(-) - -commit d35964053ae26738a996d4589eed8989930d30e4 -Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> -Date: Sun Dec 26 15:00:38 2010 +0700 - - Updated Vietnamese translation - - po/vi.po | 202 +++++++++++++++++++++++---------------------------------------- - 1 file changed, 73 insertions(+), 129 deletions(-) - -commit bf3877de4f4310f3d00dc475ddc288627bd421d9 -Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> -Date: Sun Dec 26 14:45:09 2010 +0700 - - po/vi.po: import from Damned Lies - - po/vi.po | 1073 +++++++++++++++++++++++++++++++++++++++----------------------- - 1 file changed, 682 insertions(+), 391 deletions(-) - -commit ebe5fba755f422f3e8aa764637d200d607ff9628 -Author: Daniel Mustieles <daniel.mustieles@gmail.com> -Date: Thu Dec 23 20:21:14 2010 +0100 - - Updated Spanish translation - - po/es.po | 276 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 139 insertions(+), 137 deletions(-) - -commit 105ab9e0f233634210b8fe6cb9c46b0c7740a397 -Author: Ivar Smolin <okul@linux.ee> -Date: Thu Dec 23 19:32:20 2010 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - -commit adc355d063324cbc9d233d115ec675d99e3af5d2 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 23 16:58:23 2010 +0200 - - Simplify some code - - src/eog-window.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit afc1978771501d201ba6f0cd2cd7c0f4ec45af2e -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 23 10:20:13 2010 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d71c9cf9881e9de032010a2dccb15c715d88d502 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 23 00:16:59 2010 +0200 - - Prepare release 2.91.5 - - NEWS | 5 +++++ - 1 file changed, 5 insertions(+) - -commit ec6c2435c16a003f252afbe318b3c656d5e9de0b -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Dec 23 00:13:09 2010 +0200 - - Replace gdk_spawn_command_line_on_screen() with g_app_info_launch() - - This fixes the build with gtk 2.91.7 - - configure.ac | 2 +- - src/eog-window.c | 38 ++++++++++++++++++++++++++++++++------ - 2 files changed, 33 insertions(+), 7 deletions(-) - -commit de6d16dbb8ebef044c06f41a2f7fe3938c163614 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Dec 21 19:02:28 2010 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit de9de20b47239f14db76b767b71e378488f2226c -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Dec 21 18:57:32 2010 +0100 - - Prepare for release 2.91.4 - - NEWS | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - -commit aa1ceac427d99e70bc2747b4503f6307f4f841e3 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Dec 21 18:33:06 2010 +0100 - - Really fix build without libexif - - Add changes forgotten in commit ebb9e525. Fixes bug 637648. - - src/eog-image.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 72e3254ed7f88b4c3b09d0bf98f43482404e8450 -Author: Ivar Smolin <okul@linux.ee> -Date: Mon Dec 20 15:22:25 2010 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit ebb9e525a84fb169c79908ff646288550f7e480a -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Dec 18 15:35:15 2010 +0100 - - Fix build without libexif - - src/eog-image.h | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -commit 796aae00058655d6f9e796f36fd7420991c657a7 -Author: Marek Kašík <mkasik@redhat.com> -Date: Sat Dec 18 15:19:14 2010 +0100 - - Use default page settings when opening print dialog the first time - - Use the default page setup the first time after application start. - Then re-use the last used page setup for rest of the time. - Fixes bug 549039. - - src/eog-window.c | 24 +++++++++++++++++++++--- - 1 file changed, 21 insertions(+), 3 deletions(-) - -commit 3cc45bdc35fbfd14627d266c0344f677d2037dcb -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Dec 18 13:52:04 2010 +0100 - - Define EogExifData type using G_DEFINE_BOXED_TYPE macro - - configure.ac | 2 +- - src/eog-exif-util.c | 15 +++------------ - 2 files changed, 4 insertions(+), 13 deletions(-) - -commit b88d3713fe45a4bab1bd24ac8ff60551c5c31d49 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Aug 9 00:51:06 2010 +0300 - - Wrap ExifData in a EogExifData boxed type - - This is for better interaction with bindings - - https://bugzilla.gnome.org/show_bug.cgi?id=626257 - - plugins/statusbar-date/eog-statusbar-date-plugin.c | 10 ++++---- - src/eog-exif-util.c | 28 +++++++++++++++++++++- - src/eog-exif-util.h | 10 +++++++- - src/eog-image.c | 4 ++-- - src/eog-image.h | 3 ++- - src/eog-metadata-reader.c | 4 ++-- - src/eog-metadata-reader.h | 4 ++-- - src/eog-properties-dialog.c | 4 ++-- - src/eog-thumb-view.c | 2 +- - 9 files changed, 51 insertions(+), 18 deletions(-) - -commit 5f66a42b0f445b181b4612474af43b7304104684 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Aug 9 00:48:08 2010 +0300 - - Rename EogDebugSection to EogDebug - - Also rename EOG_NO_DEBUG to EOG_DEBUG_NO_DEBUG for clarity - in bindings. - - https://bugzilla.gnome.org/show_bug.cgi?id=626257 - - src/eog-debug.c | 10 +++++----- - src/eog-debug.h | 8 ++++---- - 2 files changed, 9 insertions(+), 9 deletions(-) - -commit 9c10f508e0be7f2036d993eff6e6fbd40aefea76 -Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> -Date: Thu Dec 9 19:58:56 2010 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 533 +++++++++++++++++++++++++++++++-------------------------- - po/zh_TW.po | 556 +++++++++++++++++++++++++++++++++--------------------------- - 2 files changed, 599 insertions(+), 490 deletions(-) - -commit 6a406bf93969a73159b67eefe125f700a1f82126 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Dec 6 21:55:25 2010 +0100 - - Ignore drag&drop requests from a window onto itself - - Avoids accidential DnD of an image into the same window (e.g. while - trying to scroll) and the resulting reload. Fixes bug 585069. - - src/eog-window.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - -commit 75301e4cce11e4b6a5d649f65329e317dc024ef2 -Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> -Date: Fri Dec 3 05:40:41 2010 +0200 - - Updated Romanian translation - - po/ro.po | 612 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 340 insertions(+), 272 deletions(-) - -commit de2cfab8546071c63be52181bdfab9f144f38353 -Author: Djavan Fagundes <djavan@comum.org> -Date: Thu Dec 2 13:45:32 2010 -0200 - - Updated Brazilian Portuguese translation for manual - - help/pt_BR/pt_BR.po | 400 ++++++++++++++++++++++++++++------------------------ - 1 file changed, 218 insertions(+), 182 deletions(-) - -commit 685ea8bd493b3832f9e245dd2da294ef9edf15c3 -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Dec 2 15:30:07 2010 +0100 - - Make toolbar editor expand vertically to fully use the dialog's space - - Editor only showed a single row of items due to the changed expand - behaviour in GTK+-3 before. - - src/eog-window.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit 596040f0ec1f3a7db6c888307ce9d521571f58a3 -Author: Ivar Smolin <okul@linux.ee> -Date: Wed Dec 1 20:27:27 2010 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit c5de0715e2607a4fa8f9681eeaf8c0d3d9dca9be -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Nov 29 22:54:44 2010 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 28b502735a23a883495846991c31391414f27a0f -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Nov 29 22:49:34 2010 +0100 - - Prepare for release 2.91.3 - - NEWS | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - -commit 47709d4be672da5c250de83204f13d118504bdf3 -Author: Theppitak Karoonboonyanan <thep@linux.thai.net> -Date: Mon Nov 29 19:50:36 2010 +0700 - - Updated Thai translation. - - po/th.po | 659 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 378 insertions(+), 281 deletions(-) - -commit 14c9c1844d95c3248bc40204a79cf7b4274e386c -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Nov 20 14:27:18 2010 +0100 - - Fix installing UI data files and Automake warnings - - data/Makefile.am | 12 +++--------- - 1 file changed, 3 insertions(+), 9 deletions(-) - -commit 1bff58f772de4aad8cbf0886e46e1c26e075b54b -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Nov 20 14:18:16 2010 +0100 - - Respect lockdown setting for page setup again - - This apparently got broken when the page setup dialog was merged into - the general print dialog. - - src/eog-window.c | 13 +++++++++---- - 1 file changed, 9 insertions(+), 4 deletions(-) - -commit 99f8997a71a6fecd70512432eb3c481d0dc34d8b -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Nov 20 14:11:15 2010 +0100 - - Drop GConf dependency - - Concludes the GSettings migration. Closes bug 620121. - - configure.ac | 3 --- - src/eog-config-keys.h | 2 +- - src/eog-window.c | 22 ---------------------- - 3 files changed, 1 insertion(+), 26 deletions(-) - -commit 653cf389ef92241aa2a66d04b3dad71eeacd4bf3 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Nov 20 14:03:45 2010 +0100 - - Convert lockdown settings from GConf to GSettings - - Part of bug 620121. - - src/eog-config-keys.h | 8 +++++--- - src/eog-window.c | 49 +++++++++++++++++++++---------------------------- - 2 files changed, 26 insertions(+), 31 deletions(-) - -commit 9bc346bc624c7fde7c3cd878b9f35cb65795bb41 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Nov 20 13:07:14 2010 +0100 - - Convert background image setting fro GConf to GSettings - - Adds dependency on gsettings-desktop-schemas package. - Part of bug 620121. - - configure.ac | 6 ++++-- - src/eog-config-keys.h | 3 ++- - src/eog-window.c | 10 ++++------ - 3 files changed, 10 insertions(+), 9 deletions(-) - -commit 9f4b5f4579bb181772c15ad8982178aa40f1ae82 -Author: Gheyret T.Kenji <gheyret@gmail.com> -Date: Sat Nov 20 11:01:23 2010 +0100 - - Added UG translation - - po/ug.po | 26 ++++---------------------- - 1 file changed, 4 insertions(+), 22 deletions(-) - -commit d26606d6273427777790e998902d86acd57c3393 -Author: Baptiste Mille-Mathias <baptiste.millemathias@gmail.com> -Date: Fri Nov 19 15:58:54 2010 +0100 - - Remove any reference to glade* (bug 634942) - - README | 4 ++-- - bindings/python/eog.defs | 2 +- - data/Makefile.am | 6 +++--- - src/eog-dialog.c | 8 ++++---- - src/eog-dialog.h | 4 ++-- - 5 files changed, 12 insertions(+), 12 deletions(-) - -commit 3e2af1c2ba6450075f0315a5230015853b97f87d -Author: Baptiste Mille-Mathias <baptiste.millemathias@gmail.com> -Date: Mon Nov 15 15:21:09 2010 +0100 - - Fix build against GNOME 3 platform - - https://bugzilla.gnome.org/show_bug.cgi?id=634907 - - configure.ac | 2 +- - src/eog-file-chooser.c | 2 +- - src/eog-thumbnail.c | 2 +- - 3 files changed, 3 insertions(+), 3 deletions(-) - -commit 77c9d63062e17eb69a8de28be25e67a22ff3ad5d -Author: Baptiste Mille-Mathias <baptiste.millemathias@gmail.com> -Date: Mon Nov 15 22:05:35 2010 +0100 - - Revert "Removing any reference to *glade." - - This reverts commit 8dcfe6669500a15b11e15321c64d5b8ed756d715. - - README | 4 ++-- - src/eog-dialog.c | 8 ++++---- - src/eog-dialog.h | 4 ++-- - 3 files changed, 8 insertions(+), 8 deletions(-) - -commit 8dcfe6669500a15b11e15321c64d5b8ed756d715 -Author: Baptiste Mille-Mathias <baptiste.millemathias@gmail.com> -Date: Mon Nov 15 21:52:02 2010 +0100 - - Removing any reference to *glade. - - README | 4 ++-- - src/eog-dialog.c | 8 ++++---- - src/eog-dialog.h | 4 ++-- - 3 files changed, 8 insertions(+), 8 deletions(-) - -commit 1519e3c4d830c8917adcc688c45bc7a6b5ef922e -Author: Gheyret T.Kenji <gheyret@gmail.com> -Date: Sat Nov 13 21:50:21 2010 +0100 - - Added UG translation - - po/ug.po | 3359 +++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 1672 insertions(+), 1687 deletions(-) - -commit 46b027696fd73c115efe6d13421105750a0bf86c -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Nov 13 14:08:44 2010 +0100 - - Workaround concurrency issue with statusbar-date plugin - - Make sure that only an image loading job does autorotation. A metadata - loading job has no use for this. Works around lost signals when the - statusbar-date plugin is activated. Works around bug 622161. - - src/eog-image.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -commit 1564455e2585cfee8dd30d7adbe65715608aee03 -Author: Javier Jardón <jjardon@gnome.org> -Date: Tue Nov 9 03:20:29 2010 +0100 - - Use gtk_paned_new() instead gtk_[h|v]paned_new() - - src/eog-window.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 77de86634dfe2c817f4d403ced8e9fd8a9cf9d90 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Nov 8 23:24:30 2010 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0b7990c56ec3c4e6fc0c706767cf4cdba2daa85c -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Nov 8 23:20:07 2010 +0100 - - Prepare for release 2.91.2 - - NEWS | 29 +++++++++++++++++++++++++++++ - 1 file changed, 29 insertions(+) - -commit 88407daf16b509dc33256ad11a8941a8eb4e3eb4 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Nov 2 20:20:02 2010 +0100 - - Use GRandom as random value generator for random image function - - Seems to have a better distribution. At least works better with lower - image counts. Fixes bug 633764. - - src/eog-thumb-view.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 474b6c1b1e36e69f8f131cbf5d4f05e20f452928 -Author: Ivar Smolin <okul@linux.ee> -Date: Mon Nov 1 08:16:41 2010 +0200 - - [l10n] Updated Estonian translation - - po/et.po | 55 +++++++++++++++++++++++++++++++++++++------------------ - 1 file changed, 37 insertions(+), 18 deletions(-) - -commit dde2c098d66c92c4bdbeedff77463780711c9b75 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Sun Oct 31 20:25:26 2010 +0100 - - Updated Slovenian translation - - po/sl.po | 462 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 262 insertions(+), 200 deletions(-) - -commit 931cdd9e3fdc35f94494a40640f3eae694dbfc07 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Oct 31 19:08:43 2010 +0100 - - Refactor XDG folders migration - - Merges the multiple migration points into a single one. - Use GIO for moving files which avoids overwriting present stuff. - Remove old config folder once it's empty. Only migrate files that - actually belong to eog. Concludes bug 522806. - - src/eog-application.c | 26 ++---------- - src/eog-util.c | 109 ++++++++++++++++++++++++++++++++++++-------------- - 2 files changed, 84 insertions(+), 51 deletions(-) - -commit c92e86a6e9816ac5a5a1a97ac6786a06aed9cb81 -Author: Sebastian Geiger <sbastig@invisco.de> -Date: Sat Aug 21 12:44:48 2010 +0200 - - Add code for migrating config and cache file to XDG folders - - Move files from old config dir into XDG-based config folder. - Part of bug 522806. - - src/eog-application.c | 33 +++++++++++++++++++++++++-------- - src/eog-util.c | 32 ++++++++++++++++++++++++++++---- - 2 files changed, 53 insertions(+), 12 deletions(-) - -commit ad1bb602f3a922681da5b9d6ae9f9cc75c8dc0ff -Author: Sebastian Geiger <sbastig@invisco.de> -Date: Sat Aug 21 12:11:30 2010 +0200 - - Place configuration files into an XDG standard config folder - - Just replaces the paths for now. Part of bug 522806. - - src/eog-application.c | 14 ++++++-------- - src/eog-util.c | 3 +-- - 2 files changed, 7 insertions(+), 10 deletions(-) - -commit f4c19dfa0db163cac91024db0ed885d614a5ef30 -Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> -Date: Sun Oct 31 14:40:17 2010 +0900 - - Updated Japanese translation - - po/ja.po | 21 ++++++++++++--------- - 1 file changed, 12 insertions(+), 9 deletions(-) - -commit 00075ab25d5bd3656a2f5f89773bd56e091d5b47 -Author: Javier Sánchez <jsanchez@deskblue.com> -Date: Sat Oct 23 23:22:19 2010 +0200 - - Make newly saved images user writable - - Doesn't occur for existing files only when saving creates a new file. - Fixes bug #589921. - - src/eog-jobs.c | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - -commit 7a6ea9ee0e5e8a2d89fd16f241a693c5a56f3b78 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Oct 23 23:54:33 2010 +0200 - - Clear status + titlebar when deleting last image in collection - - Fixes bug 632458. - - src/eog-statusbar.c | 4 ++++ - src/eog-window.c | 20 ++++++++++++++------ - 2 files changed, 18 insertions(+), 6 deletions(-) - -commit 29e86493d648f70ee51f54aa53f8915418263ef6 -Author: Laco Gubík <lacogubik@gmail.com> -Date: Mon Oct 25 21:06:28 2010 +0200 - - Updated Slovak translation - - po/sk.po | 1449 ++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 897 insertions(+), 552 deletions(-) - -commit ff1e76ae5227ed08f5cb4f2109434972f33b7941 -Author: Javier Sánchez <jsanchez@deskblue.com> -Date: Sat Oct 23 07:49:29 2010 +0200 - - Removed all references to gtk_widget_hide_all - - gtk_widget_hide_all was removed in the latest version of gtk+. - Fixes bug #632954. - - src/eog-properties-dialog.c | 16 ++++++++-------- - src/eog-thumb-nav.c | 16 ++++++++-------- - src/eog-window.c | 6 +++--- - 3 files changed, 19 insertions(+), 19 deletions(-) - -commit ea9e37e7dd01bf7f1b7b50472b250a41a758f63b -Author: Javier Sánchez <jsanchez@deskblue.com> -Date: Sat Oct 23 07:57:55 2010 +0200 - - Completely replaced references to GtkComboBoxText widget. - - Fixes bug #632608. - - src/eog-print-image-setup.c | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -commit 39509447bb071829f2df49ba3dee2fd9a4dbd16c -Author: Carles Ferrando <carles.ferrando@gmail.com> -Date: Sat Oct 23 01:04:20 2010 +0200 - - Updated Catalan (Valencian) translation - - po/ca@valencia.po | 518 +++++++++++++++++++++++++++++++----------------------- - 1 file changed, 295 insertions(+), 223 deletions(-) - -commit 5c2ac1c49f66731b9c78b9baa44fe38fef5fe480 -Author: Gheyret T.Kenji <gheyret@gmail.com> -Date: Thu Oct 21 18:25:46 2010 +0200 - - Added UG translation - - po/ug.po | 1950 +++++++++++++++++++++++++++++++++++++++++++++----------------- - 1 file changed, 1413 insertions(+), 537 deletions(-) - -commit d6cf404307d69c148a8b8f78ac0d59582882f4ff -Author: Matthias Clasen <mclasen@redhat.com> -Date: Wed Oct 20 18:21:50 2010 +0200 - - Handle combobox text API going away - - The combobox text convenience API is replaced by a GtkComboBoxText - widget in gtk-3. Fixes bug 632608. - - src/eog-print-image-setup.c | 18 +++++++++--------- - 1 file changed, 9 insertions(+), 9 deletions(-) - -commit 608ef5240e87c4d0e182e7748698e2c298ec00c8 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Oct 20 18:17:43 2010 +0200 - - Make print preview use the "draw"-signal instead of "expose-event" - - src/eog-print-preview.c | 18 +++++++----------- - 1 file changed, 7 insertions(+), 11 deletions(-) - -commit 7271873d66ba42edc1e635d56d1821ba997f5588 -Author: Aron Xu <aronxu@gnome.org> -Date: Wed Oct 20 16:54:38 2010 +0800 - - Update Simplified Chinese translation. - - po/zh_CN.po | 543 ++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 294 insertions(+), 249 deletions(-) - -commit 9e704e7ecbbfe603c38f90508a63411adaf86dc4 -Author: Jakob Kramer <jakob.kramer@gmx.de> -Date: Tue Oct 19 19:30:44 2010 +0200 - - [i18n] Updated German translation - - po/de.po | 351 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 189 insertions(+), 162 deletions(-) - -commit 02e02c72c660a9db79e791458dd4cae5ad766348 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Oct 18 22:36:41 2010 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d31abc1ee49162c664a4b9d9a26b89e01ec20d2c -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Oct 18 22:30:22 2010 +0200 - - Prepare for release 2.91.1 - - NEWS | 30 ++++++++++++++++++++++++++++++ - 1 file changed, 30 insertions(+) - -commit 91160984bed34014fcd02b075fa4b72442deec2e -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Oct 17 13:51:49 2010 +0200 - - [statusbar-date] Remove resize grip handling - - The parent window handles this now. - - plugins/statusbar-date/eog-statusbar-date-plugin.c | 2 -- - 1 file changed, 2 deletions(-) - -commit 05810eafb4781b3313f59e2e52724d6ea4ede118 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Oct 17 13:06:58 2010 +0200 - - Make "Best Fit" a toggle action - - This should make it clear from the toolbar when the image will be - rescaled with the window and when not. Fixes bug 616890. - - src/eog-window.c | 36 ++++++++++++++++++++++++++++++++---- - 1 file changed, 32 insertions(+), 4 deletions(-) - -commit 9ff7cefd9174267fa6c57bbc4b60133e09cb0931 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Oct 11 20:50:21 2010 +0200 - - Make EogScrollView's zoom mode a public property - - src/eog-scroll-view.c | 85 ++++++++++++++++++++++++++++++++++++++------------- - src/eog-scroll-view.h | 8 ++++- - src/eog-window.c | 3 +- - 3 files changed, 73 insertions(+), 23 deletions(-) - -commit f866669251b6efa303725434e51e24c0bcddbf0d -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Sun Oct 17 11:55:45 2010 +0200 - - Added sl for Slovenian translation - - help/Makefile.am | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 33f06002d4c9042d29d80982682cbc54a6663d0d -Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> -Date: Sun Oct 17 11:54:53 2010 +0200 - - Updated Slovenian translation - - help/sl/sl.po | 995 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 995 insertions(+) - -commit 5bb5a0bbbd8a47215828f30d97474d63dc979be4 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Oct 16 22:50:50 2010 +0200 - - Support transpose/transverse as lossless JPEG transformations - - Also implement a warning message if unsupported transformations - are used to easier discover such cases in the future. Fixes bug 632290. - - src/eog-image-jpeg.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - -commit f2a9be530668155e2a6ab31213f230b104f4832b -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Oct 16 22:41:56 2010 +0200 - - Fix calculation of reference matrices for transpose/transverse - - The flip matrices were applied as if the source matrix were an identity - matrix instead of properly multiplicating them. - - src/eog-transform.c | 16 ++++++++++------ - 1 file changed, 10 insertions(+), 6 deletions(-) - -commit 11f5bf78a6299b5625a8e1b5e40449d0815b018f -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Sat Oct 16 13:36:25 2010 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 417 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 215 insertions(+), 202 deletions(-) - -commit b417c57d846bfa83045de8d74ed35e96ef345e22 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Oct 15 17:29:36 2010 +0200 - - Don't try to thumbnail named pipes in the file open dialog - - In fact this means all "special" files like sockets and device files. - This prevents lockups due to file I/O blocking here. Fixes bug 623271. - - src/eog-file-chooser.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -commit ae87b75f46608db9812ee5cfa0c58a0eddd67324 -Author: A S Alam <aalam@users.sf.net> -Date: Wed Oct 13 07:42:42 2010 +0530 - - update translation: Punjabi - - po/pa.po | 574 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 314 insertions(+), 260 deletions(-) - -commit 533e5669f7fcb10f8bcc10874c181c71a9b3af75 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Mon Oct 11 10:47:27 2010 +0200 - - Updated Galician translations - - po/gl.po | 571 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 308 insertions(+), 263 deletions(-) - -commit b21dd56b9437e53b7ba8abdd96942c1871edc02c -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Oct 9 15:33:37 2010 +0200 - - Make sure EogScrollView's adjustment values are always correctly set - - Ensures one can only scroll as far as necessary. If one scrolled to far - the images's last line/column was used for padding. Fixes bug 631710. - - src/eog-scroll-view.c | 58 +++++++++++++++++++++------------------------------ - 1 file changed, 24 insertions(+), 34 deletions(-) - -commit 10f17139ed47ebc194ece30e6632ba441463de75 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Oct 9 20:56:46 2010 +0200 - - Remove resize grip handling - - Latest GTK+ can handle this automatically for any window. - Raise GTK+ dependency version to catch the required GTK changes. - - configure.ac | 2 +- - src/eog-statusbar.c | 12 ------------ - src/eog-statusbar.h | 3 --- - src/eog-window.c | 25 ------------------------- - 4 files changed, 1 insertion(+), 41 deletions(-) - -commit 91ea4ede99cf78a2663a145cefe5ba3f715c1e16 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Thu Oct 7 14:19:55 2010 +0200 - - Updated Spanish translation - - po/es.po | 353 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 173 insertions(+), 180 deletions(-) - -commit ec3c660b166b23d90140ebdefd02a969c3719d42 -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Thu Oct 7 08:39:32 2010 +0200 - - Updated Hebrew translation. - - po/he.po | 556 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 301 insertions(+), 255 deletions(-) - -commit 349676e43252477219d07cad279861bd9484d94d -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Oct 6 21:18:49 2010 +0200 - - Check if an editor has been set before comparing it to other apps - - Fixes critical warnings if no editor application has been set. - - src/eog-window.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit b5e6b7d31181ab87f788921f751a6550bddb5bcf -Author: Ryan Lortie <desrt@desrt.ca> -Date: Sun Feb 14 20:48:13 2010 -0500 - - Bug 609958 - add "Edit Image" toolbar button - - Add a conditionally-enabled "Edit Image" toolbar button. The toolbar is - only enabled if a specific image editor is specified in GSettings. - - configure.ac | 1 + - data/org.gnome.eog.gschema.xml.in.in | 5 ++ - src/eog-config-keys.h | 1 + - src/eog-window.c | 121 +++++++++++++++++++++++++++++++++++ - 4 files changed, 128 insertions(+) - -commit 35ea437d25c94cbd7c0c61c7a4c3094a239048d8 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Sep 13 18:38:14 2010 +0300 - - Don't create thumbnails out of outdated image pixbufs - - Fixes bug #614634 - EOG prevents the Desktop thumbnails to be updated - - src/eog-thumbnail.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -commit 50390e87fe4f14f3a68ca93b3048127c15244750 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Sep 13 18:35:42 2010 +0300 - - Add eog_image_is_file_changed() - - doc/reference/eog-sections.txt | 1 + - src/eog-image.c | 8 ++++++++ - src/eog-image.h | 2 ++ - 3 files changed, 11 insertions(+) - -commit c1cc23e3c776c9b05b255c7127b4932d2d076b4e -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Sep 13 18:35:24 2010 +0300 - - Store the changed status of an image file - - src/eog-image-private.h | 1 + - src/eog-image.c | 7 ++++++- - 2 files changed, 7 insertions(+), 1 deletion(-) - -commit 0094e371c453d7f57bec7f502c86a99889df2f54 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Oct 4 23:11:29 2010 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 5f1e407910accf4be69f256dd55d6d87af5d4afa -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Oct 4 23:08:07 2010 +0200 - - Prepare for release 2.91.0 - - NEWS | 76 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 76 insertions(+) - -commit 07ec6f14d55cd990dd27661c2bf38c934d54d36f -Author: Simos Xenitellis <simos@gnome.org> -Date: Thu Sep 30 14:45:07 2010 +0300 - - l10n: Updated Greek translation for eog - - po/el.po | 559 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 330 insertions(+), 229 deletions(-) - -commit 8be6bfaa2f41e5ffd798f5c96e012ff286d0b31a -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Sep 28 16:15:49 2010 +0300 - - Remove call to gdk_window_clear() - - This doesn't exist anymore, and it's not needed, since the surface is - clean before ::draw is emitted. - - src/eog-scroll-view.c | 3 --- - 1 file changed, 3 deletions(-) - -commit e300daf3ad2743199cab0263d945e3bf732a05b3 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Sep 28 16:02:55 2010 +0300 - - Connect to the ::draw signal instead of the removed ::expose-event - - src/eog-scroll-view.c | 13 +++---------- - 1 file changed, 3 insertions(+), 10 deletions(-) - -commit c976adaa1322140ebb8d33d5be379ed47a45c4e5 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Sep 28 16:02:16 2010 +0300 - - Pass a cairo context to gtk_paint_focus() - - src/eog-print-preview.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit c798458f657ed73a4a82e3f9c78813200bb31899 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Sep 28 16:01:46 2010 +0300 - - Bump GTK+ requirement - - We need to fix eog for all the changes that are to land with 2.90.8 - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit eda89edd1a6be308896fc5bb40b41c77dfd5df2c -Author: Matthias Clasen <mclasen@redhat.com> -Date: Tue Sep 28 15:50:26 2010 +0300 - - Drop GtkObject use - - https://bugzilla.gnome.org/show_bug.cgi?id=630686 - - Signed-off-by: Claudio Saavedra <csaavedra@igalia.com> - - src/eog-sidebar.c | 8 +++----- - src/eog-thumb-view.c | 10 +++++----- - 2 files changed, 8 insertions(+), 10 deletions(-) - -commit 04cb8b2948d49dea2459e8bbca088011e46c3206 -Author: Gil Forcada <gforcada@gnome.org> -Date: Mon Sep 27 20:33:02 2010 +0200 - - Updated Catalan translation - - po/ca.po | 511 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 291 insertions(+), 220 deletions(-) - -commit 22a65acf2ed91886d7c00824409949bf745a0682 -Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> -Date: Mon Sep 27 10:32:41 2010 +0200 - - Updated Basque language - - po/eu.po | 473 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 269 insertions(+), 204 deletions(-) - -commit a7d3085013d86dcfb75e95df64d1e39065646dee -Author: Ivaylo Valkov <ivaylo@e-valkov.org> -Date: Sun Sep 26 16:43:43 2010 +0300 - - Updated Bulgarian translation - - po/bg.po | 608 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 323 insertions(+), 285 deletions(-) - -commit 2e7c4b47cda1e31459e3eb12b571cd4d3ae27d03 -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Thu Sep 23 13:31:43 2010 +0300 - - Updated Arabic translation - - po/ar.po | 263 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 139 insertions(+), 124 deletions(-) - -commit c6c8fa03240958e73105df603adc1af0ca6d16c2 -Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> -Date: Mon Sep 20 17:04:19 2010 +0900 - - Updated Japanese translation - - po/ja.po | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -commit 04623ee8ba2af676349f53e246c13a241d690a20 -Author: Priit Laes <plaes@plaes.org> -Date: Sun Sep 19 20:37:16 2010 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 38 +++++++++++++++++++------------------- - 1 file changed, 19 insertions(+), 19 deletions(-) - -commit 0034712463f772016dd405113e7051ca54618a80 -Author: Yuri Myasoedov <ymyasoedov@src.gnome.org> -Date: Sun Sep 19 21:02:24 2010 +0400 - - Updated Russian translation - - po/ru.po | 717 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 356 insertions(+), 361 deletions(-) - -commit 4018f3efbff0a43a2a54c57ce80d390e8b14bb3a -Author: Wouter Bolsterlee <wbolster@gnome.org> -Date: Sun Sep 19 18:30:49 2010 +0200 - - Updated Dutch translation by Wouter Bolsterlee - - po/nl.po | 629 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 358 insertions(+), 271 deletions(-) - -commit 68413b42908b4c17b3f850bac71867e1ac3ce3a9 -Author: Ivar Smolin <okul@linux.ee> -Date: Sun Sep 19 11:56:12 2010 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 9 ++++----- - 1 file changed, 4 insertions(+), 5 deletions(-) - -commit 8f84b54e34d66a86624aabb5586f4cb69d6d333a -Author: Bruno Brouard <annoa.b@gmail.com> -Date: Sat Sep 18 20:34:05 2010 +0200 - - Updated French translation - - po/fr.po | 491 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 268 insertions(+), 223 deletions(-) - -commit abb3647201abe463aace3cc7252fbbf0f5f60854 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Fri Sep 17 19:45:26 2010 +0200 - - Updated Spanish translation - - po/es.po | 549 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 304 insertions(+), 245 deletions(-) - -commit 9d1b7483ae47e5db65c254342b5b8fb55f26c249 -Author: Gintautas Miliauskas <gintautas@miliauskas.lt> -Date: Thu Sep 16 22:50:13 2010 +0300 - - Updated Lithuanian translation (thanks Aurimas Cernius). - - po/lt.po | 677 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 385 insertions(+), 292 deletions(-) - -commit f0eb1a0db70b5cc1af83b257a62f0d7103c92fe7 -Author: Gianvito Cavasoli <gianvito@gmx.it> -Date: Thu Sep 16 17:57:54 2010 +0200 - - [l10n] Updated Italian translation - - po/it.po | 502 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 285 insertions(+), 217 deletions(-) - -commit da709e96e7536cbd7b1b22a24e40457e2edf65d8 -Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> -Date: Thu Sep 16 21:35:45 2010 +0900 - - Updated Japanese translation. - - po/ja.po | 537 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 302 insertions(+), 235 deletions(-) - -commit 22987f7594382effb97f98080ef0a47a31d32b0a -Author: Kenneth Nielsen <k.nielsen81@gmail.com> -Date: Wed Sep 15 20:30:36 2010 +0200 - - Updated Danish translation - - po/da.po | 251 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 133 insertions(+), 118 deletions(-) - -commit 4f8def2160c053d910c15f53ace97ab7431c4bee -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Wed Sep 15 16:28:47 2010 +0300 - - Plug leaked glist in EogWindow - - src/eog-window.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 6aff895cc42d08aca91657ab7bb85a99c2ea1899 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Wed Sep 15 16:28:04 2010 +0300 - - Minor optimization - - GList should always be prepended and reversed later. - - src/eog-window.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit 4746be007c48962e40154965dd41952d9278a230 -Author: Ivar Smolin <okul@linux.ee> -Date: Wed Sep 15 11:53:07 2010 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 25 +++++++++++++++++++------ - 1 file changed, 19 insertions(+), 6 deletions(-) - -commit 503792113ce4262919c4d886713e885d1ad7bd08 -Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> -Date: Wed Sep 15 13:55:25 2010 +0600 - - Initial translation to Kazakh - - po/LINGUAS | 1 + - po/kk.po | 1404 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1405 insertions(+) - -commit 2a77eca2bc44237f1fb2918ba57834209efa0717 -Author: Christian Kirbach <Christian.Kirbach@googlemail.com> -Date: Tue Sep 14 23:44:58 2010 +0200 - - [l10n] Updated German translation - - po/de.po | 267 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 141 insertions(+), 126 deletions(-) - -commit f53dcbb275a06bc224a9bdb26084b6d1e768931a -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Tue Sep 14 14:31:17 2010 +0200 - - Updated Hungarian translation - - po/hu.po | 257 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 136 insertions(+), 121 deletions(-) - -commit 7eb19f2bffe29ebcda5575e7927cb58b4bd35bac -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Fri Sep 10 17:53:19 2010 +0300 - - Ask the user whether to reload an externally modified image - - Fixes bug 534348 - eog should suggest to reload a modified file - - src/eog-window.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 72 insertions(+) - -commit d4174ac084accda573e9e345c380dc3b0d63d170 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Fri Sep 10 17:52:41 2010 +0300 - - Emit ::file-changed when a image in a a monitored directory changes - - src/eog-list-store.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -commit face399a1a1898b9fa6c82456ed85084a23c83f9 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Fri Sep 10 17:51:37 2010 +0300 - - Add a EogImage::file-changed signal - - This is going to be useful to broadcast changes in the underlying file - - doc/reference/eog-sections.txt | 1 + - src/eog-image.c | 23 +++++++++++++++++++++++ - src/eog-image.h | 4 ++++ - 3 files changed, 28 insertions(+) - -commit 7429d93233f2c2af98f2dc091be49e170f252e79 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Fri Sep 10 17:58:46 2010 +0300 - - Fix a typo in EogImage:next-frame signal definition - - src/eog-image.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit e090c281cddae35bf22a6093e0de6b123159f800 -Author: Kenneth Nielsen <k.nielsen81@gmail.com> -Date: Sun Sep 12 17:06:11 2010 +0200 - - Updated Danish translation - - po/da.po | 636 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 356 insertions(+), 280 deletions(-) - -commit ba89d0480214d4a6c8651299e534a923da5e0c3c -Author: Duarte Loreto <happyguy_pt@hotmail.com> -Date: Fri Sep 10 23:48:41 2010 +0100 - - Updated Portuguese translation - - po/pt.po | 660 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 367 insertions(+), 293 deletions(-) - -commit f6f67169a51cf304dafa641e50168686c9accdc0 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Sep 10 23:01:49 2010 +0200 - - Remove has_separator attribute from GtkBuilder files - - Fixes warnings about unsupported properties due to recent - deprecations in GTK+. - - data/eog-image-properties-dialog.ui | 1 - - data/eog-multiple-save-as-dialog.ui | 1 - - data/eog-preferences-dialog.ui | 1 - - 3 files changed, 3 deletions(-) - -commit cbe0fc08f4a02f3d12b946db7d78995d05e4cfb9 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Sep 10 22:49:34 2010 +0200 - - Set version to 2.91.0. - - Make it uneven to show it's a development version. - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c4f204aee4640b3997d3e30d67f6f292da935078 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Sep 10 21:04:47 2010 +0200 - - Fix GDK_DISPLAY() usage. - - It has been removed in latest GTK+. - - cut-n-paste/totem-screensaver/totem-scrsaver.c | 51 ++++++++++++++++---------- - 1 file changed, 31 insertions(+), 20 deletions(-) - -commit 01593dc2f1ada3c07d7681f489fb0d2bf9562de7 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Sep 10 20:49:26 2010 +0200 - - Make GtkDialog-usage compatible with GTK+-2.90.7 - - src/eog-close-confirmation-dialog.c | 1 - - src/eog-window.c | 2 -- - 2 files changed, 3 deletions(-) - -commit 29d46b3c3125c27544c888d03591571679dfd0a7 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Sep 10 20:45:47 2010 +0200 - - Update GDK keysym names to be compatible with GTK+-2.90.7 - - configure.ac | 2 +- - src/eog-print-preview.c | 8 ++++---- - src/eog-scroll-view.c | 24 ++++++++++++------------ - src/eog-sidebar.c | 8 ++++---- - src/eog-window.c | 30 +++++++++++++++--------------- - 5 files changed, 36 insertions(+), 36 deletions(-) - -commit 3ff454bb5b6ab74d7a046dd098e02ad5215489f9 -Author: Petr Kovar <pknbe@volny.cz> -Date: Fri Sep 10 20:20:02 2010 +0200 - - Update Czech translation by Adrian Gunis - - po/cs.po | 248 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 125 insertions(+), 123 deletions(-) - -commit 5f03aaec0715abb9048b43291caa11c40c945a87 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Sep 9 16:00:49 2010 +0300 - - Don't show the side pane on show_all() - - This was causing the gconf key to be toggled on always on eog startup, - making the side pane visible regardless of the previously set - preference. - - Fixes bug #613056 - Side pane always shown at startup when plug-in is activated - - src/eog-window.c | 4 ++++ - 1 file changed, 4 insertions(+) - -commit 0879551dabc58de31cd37ee09bb7a0a6da369e5d -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Sep 9 02:21:12 2010 +0300 - - Show original filename instead of "eog-wallpaper.png" in the info bar - - When copying over non-persistent files, the info bar was showing - "eog-wallpaper.png" as the name of the recently copied image to the - user. Since this is an internal detail, show the original filename - instead. - - src/eog-window.c | 27 +++++++++++++++------------ - 1 file changed, 15 insertions(+), 12 deletions(-) - -commit 1598fb646b4e1218df065ed0937926d761e3a8be -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Sep 9 02:09:40 2010 +0300 - - Plug a couple of leaks - - src/eog-window.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit 59343f86c198a6e25fcdb372d8a333b40a0e0e8e -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Sep 9 01:37:49 2010 +0300 - - Copy also wallpapers in unmountable media - - Fixes bug #625384 - Background setting doesn't work as expected - - src/eog-window.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit 05a00504e896e00592f8f49525141474ae1755c5 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Sep 9 01:36:29 2010 +0300 - - Add eog_util_file_is_persistent() - - This method checks whether a file is native and in a non-unmountable - location. - - doc/reference/eog-sections.txt | 1 + - src/eog-util.c | 28 ++++++++++++++++++++++++++++ - src/eog-util.h | 3 +++ - 3 files changed, 32 insertions(+) - -commit f9ba7f06d73fcd901691e5fa375d87a3a9981cd6 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Fri Sep 3 16:42:31 2010 +0300 - - Simplify create_surface_from_pixbuf() - - src/eog-scroll-view.c | 6 +----- - 1 file changed, 1 insertion(+), 5 deletions(-) - -commit 2be68aaee33e3e6732e512a22d9ee5b681e95cc5 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Wed Aug 25 12:32:31 2010 +0300 - - Improve the rendering of scaled images - - Not using CAIRO_CONTENT_ALPHA added a black border to images, when - painted scaled. Also, a extend mode of CAIRO_EXTEND_PAD, clipped to - the image rectangle, prevents the image borders to be drawn blending - out with the background. - - https://bugzilla.gnome.org/show_bug.cgi?id=626795 - - src/eog-scroll-view.c | 12 +++++------- - 1 file changed, 5 insertions(+), 7 deletions(-) - -commit 9e6f9ee6ea2c0ca4338445a55ff3c6175ca6f623 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Wed Aug 18 02:02:53 2010 +0300 - - Honour the antialiasing-in and antialiasing-out EogScrollView properties - - https://bugzilla.gnome.org/show_bug.cgi?id=626795 - - src/eog-scroll-view.c | 3 +++ - 1 file changed, 3 insertions(+) - -commit 793ede27dd4cd0aa73d5e84cc478641e25424f54 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Wed Aug 18 02:02:01 2010 +0300 - - Replace GdkInterpType with cairo_filter_t in EogScrollView - - https://bugzilla.gnome.org/show_bug.cgi?id=626795 - - src/eog-scroll-view.c | 44 ++++++++++++++++++++++---------------------- - 1 file changed, 22 insertions(+), 22 deletions(-) - -commit bb9d00011e07e9ad68b5e4968a2c1e68596c5684 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Aug 17 18:27:52 2010 +0300 - - Remove unneeded code - - Actually, #ifdef it out and comment it. It's nice code anyway. - - https://bugzilla.gnome.org/show_bug.cgi?id=626795 - - src/eog-scroll-view.c | 19 ++++++++++++++----- - 1 file changed, 14 insertions(+), 5 deletions(-) - -commit 8654e7de549d8edf34c14f3f0a655d8773b1e433 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Aug 17 16:05:46 2010 +0300 - - Fix the SVG rendering - - Take the transformation bits from the existing code and use them to - add proper svg rendering support. - - https://bugzilla.gnome.org/show_bug.cgi?id=626795 - - src/eog-scroll-view.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++--- - 1 file changed, 51 insertions(+), 3 deletions(-) - -commit f0410a55778e719da8f2b62f0e5060bb128f028e -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Aug 17 00:03:38 2010 +0300 - - Enable double-buffer in EogScrollView - - Now that we rely on cairo, there is no reason to try to be über-smart. - Enabling double-buffer fixes the flickering and the slowness with huge - images. - - https://bugzilla.gnome.org/show_bug.cgi?id=626795 - - src/eog-scroll-view.c | 2 -- - 1 file changed, 2 deletions(-) - -commit 919929eea1d63380f773f9c0a339a32149e592ba -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Aug 16 23:14:39 2010 +0300 - - Fully rely on cairo to render the image in EogScrollView - - This is an initial patch to showcase how EogScrollView performs when - we discard all the internal optimizations and rely on cairo to render - the image. In general, performance is quite good, with a few caveats: - - - Rendering svg is broken (librsvg is not building because of the - changes in API in GTK+ 3) - - There is flickering in the rendering of the background for images - with an alpha channel - - Images bigger than 4096×4096 seems to be quite slow (at least with - an nvidia card) - - https://bugzilla.gnome.org/show_bug.cgi?id=626795 - - src/eog-scroll-view.c | 106 ++++++++++++++++++++++++++++++++++++++++++++------ - 1 file changed, 94 insertions(+), 12 deletions(-) - -commit 648302091b5517b5da96c4277fbee8f13c125938 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Aug 16 17:23:50 2010 +0300 - - Use gdk_window_create_similar_surface() for EogScrollView - - https://bugzilla.gnome.org/show_bug.cgi?id=626795 - - src/eog-scroll-view.c | 20 ++++++++++++-------- - 1 file changed, 12 insertions(+), 8 deletions(-) - -commit 889f275e38d0a7dcf062f5c63b8efaebaa1ca14f -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Fri Aug 13 14:23:29 2010 +0300 - - Store a cairo_surface_t in EogScrollView for the GdkPixbuf to be rendered - - Using this later during the rendering should improve performance. - - https://bugzilla.gnome.org/show_bug.cgi?id=626795 - - src/eog-scroll-view.c | 34 ++++++++++++++++++++++++++++++++++ - 1 file changed, 34 insertions(+) - -commit 4f432e981a956cd157ae3f190b9c7850a6f180d9 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Fri Aug 13 00:27:50 2010 +0300 - - Factor out the code to store a pixbuf in EogScrollView - - https://bugzilla.gnome.org/show_bug.cgi?id=626795 - - src/eog-scroll-view.c | 28 +++++++++++++++++++--------- - 1 file changed, 19 insertions(+), 9 deletions(-) - -commit 8eb706d628289b12a8c8ec66102f7c4051a9d2fb -Author: Dean Lee <xslidian@lidian.info> -Date: Mon Sep 6 13:17:50 2010 +0800 - - Update Simplified Chinese translation. - - po/zh_CN.po | 518 +++++++++++++++++++++++++++++------------------------------- - 1 file changed, 252 insertions(+), 266 deletions(-) - -commit 421c6b058f68d98127738d4d41ddb629412120a6 -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Sun Sep 5 16:50:13 2010 +0200 - - Updated Arabic translation - - po/ar.po | 55 ++++++++++++++++++++++++++----------------------------- - 1 file changed, 26 insertions(+), 29 deletions(-) - -commit 70fc6554484985eae1088633e03c8bd5796a0fd2 -Author: Claude Paroz <claude@2xlibre.net> -Date: Fri Sep 3 23:58:18 2010 +0200 - - Updated French translation - - po/fr.po | 418 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 200 insertions(+), 218 deletions(-) - -commit babc471a19fc18bb9a854c46e56b6ad88c86613a -Author: drtv <vasudeven@git.gnome.org> -Date: Fri Sep 3 16:16:39 2010 +0530 - - Updated Tamil translation - - po/ta.po | 437 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 224 insertions(+), 213 deletions(-) - -commit d67c7b883a67df15b47190c5774c0179bd6e54e9 -Author: Christian.Kirbach <Christian.Kirbach@googlemail.com> -Date: Thu Sep 2 09:45:27 2010 +0200 - - [l10n] Updated German translation - - po/de.po | 475 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 243 insertions(+), 232 deletions(-) - -commit 5765c89d55e1389bc239910c4ca739f392945fa4 -Author: Michael Kotsarinis <mk73628@gmail.com> -Date: Tue Aug 31 22:52:44 2010 +0300 - - l10n: Updated Greek translation for eog - - po/el.po | 726 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 335 insertions(+), 391 deletions(-) - -commit be90940a63721b94a127e230bf6de9ea4f1379b5 -Author: Andika Triwidada <andika@gmail.com> -Date: Tue Aug 31 22:25:07 2010 +0700 - - Updated Indonesian translation - - po/id.po | 413 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 221 insertions(+), 192 deletions(-) - -commit d4b03c3a1d50f6111edb3823a2477085f71d8625 -Author: Dirgita <dirgitadevina@yahoo.co.id> -Date: Tue Aug 31 15:58:35 2010 +0700 - - Updated Indonesian translation - - po/id.po | 317 ++++++++++++++++++++++++++++----------------------------------- - 1 file changed, 141 insertions(+), 176 deletions(-) - -commit 2370d59efc7d32855cbda32068a1f0a591ce6d05 -Author: Милош Поповић <gpopac@gmail.com> -Date: Tue Aug 31 01:59:58 2010 +0200 - - Updated Serbian translation - - po/sr.po | 109 +++++++++++++++++++++++++++++++++++---------------------- - po/sr@latin.po | 109 +++++++++++++++++++++++++++++++++++---------------------- - 2 files changed, 134 insertions(+), 84 deletions(-) - -commit 4435a75616e2e82186ef731c9ae6cbc76e1314b6 -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Sun Aug 29 13:19:10 2010 +0200 - - Updated Hungarian translation - - po/hu.po | 65 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 33 insertions(+), 32 deletions(-) - -commit e8eb34bb9877f0db525a1dbc1be7193ff909ab1e -Author: Ivar Smolin <okul@linux.ee> -Date: Sun Aug 29 13:18:55 2010 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 50 +++++++++++++++++++++++++------------------------- - 1 file changed, 25 insertions(+), 25 deletions(-) - -commit 625106acbeb4c7b185f17f8a59e21b658a8627d7 -Author: Philip Withnall <philip@tecnocode.co.uk> -Date: Fri Aug 27 18:21:16 2010 +0100 - - Bug 628148 — Miscellaneous string fixes - - data/org.gnome.eog.gschema.xml.in.in | 14 +++++++------- - src/eog-window.c | 2 +- - 2 files changed, 8 insertions(+), 8 deletions(-) - -commit 6c8d6c0e5b61b8ed85d0b0717a098e43ebb7d2a4 -Author: Philip Withnall <philip@tecnocode.co.uk> -Date: Fri Aug 27 18:15:17 2010 +0100 - - Update British English translation - - po/en_GB.po | 613 +++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 338 insertions(+), 275 deletions(-) - -commit 9cdfbf6875bd5e8a92fa4a69eb9a0f7192f71159 -Author: Ivar Smolin <okul@linux.ee> -Date: Fri Aug 27 17:15:21 2010 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 102 +++++++++++++++++++++------------------------------------------ - 1 file changed, 34 insertions(+), 68 deletions(-) - -commit 5fa16fe1f8e29b75af6fc1e352922c70ffc6f1bc -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Thu Aug 26 03:32:14 2010 +0200 - - Updated Hungarian translation - - po/hu.po | 443 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 248 insertions(+), 195 deletions(-) - -commit a269705a2456f1910c9a1530694c49db28a93679 -Author: Petr Kovar <pknbe@volny.cz> -Date: Mon Aug 23 23:06:36 2010 +0200 - - Update Czech translation by Adrian Gunis - - po/cs.po | 477 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 271 insertions(+), 206 deletions(-) - -commit eb267a2ac60d17c6982f94b4b75e751b5f6640ed -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Thu Aug 19 18:55:52 2010 +0200 - - Updated Arabic translation - - po/ar.po | 595 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 334 insertions(+), 261 deletions(-) - -commit ecef65ddba6aa294cdb03ded736b77084149d102 -Author: Милош Поповић <gpopac@gmail.com> -Date: Mon Aug 16 14:22:43 2010 +0200 - - Updated Serbian translation - - po/sr.po | 516 +++++++++++++++++++++++++++++---------------------------- - po/sr@latin.po | 516 +++++++++++++++++++++++++++++---------------------------- - 2 files changed, 522 insertions(+), 510 deletions(-) - -commit c858ff5d9dbd467e5e283b694c04f07fdfaabf46 -Author: Aron Xu <aronxu@gnome.org> -Date: Sat Aug 14 21:40:01 2010 +0800 - - Sync zh_CN.po from gnome-2-32. - - po/zh_CN.po | 585 +++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 323 insertions(+), 262 deletions(-) - -commit 8a9237692a572ef230ffc25593b3d673b15de9f1 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Aug 12 22:08:00 2010 +0300 - - Use cairo recommended rowstride for the surface in EogPrintPreview - - src/eog-print-preview.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - -commit f8704ad41fc4f75aaf489c55e121103b77861ccb -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Aug 12 02:13:38 2010 +0300 - - Use the new license-type property in GtkAboutDialog - - Bump the GTK+ version requirement for this. - - configure.ac | 2 +- - src/eog-window.c | 23 +---------------------- - 2 files changed, 2 insertions(+), 23 deletions(-) - -commit f9ebc7b72f1c53dce3f472771767130eb5a52bcc -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Aug 12 02:12:32 2010 +0300 - - Update the copyright years in the about dialog - - src/eog-window.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 887e6c96159bb14c03106d45eb964a10734db90b -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Aug 12 01:58:24 2010 +0300 - - Use GDK_BLANK_CURSOR for the hidden cursor - - No need to use a GdkBitmap for this. - - src/eog-scroll-view.c | 14 +------------- - 1 file changed, 1 insertion(+), 13 deletions(-) - -commit 165f3032de5384ab4073b0433b70a9aa7411b14d -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Aug 11 19:05:54 2010 +0200 - - Stop having EogWindow react on focus-in event in fullscreen - - There appears to be no actual use case for doing this. - Fixes the toolbar appearing after regaining focus (e.g. after deleting - an image or ALT+TABing). Fixes bug 626569. - - src/eog-window.c | 19 ------------------- - 1 file changed, 19 deletions(-) - -commit e25919b9a67e60dad1650e1377a30242e0d7a5fb -Author: Andika Triwidada <andika@gmail.com> -Date: Wed Aug 11 21:15:55 2010 +0700 - - Updated Indonesian translation - - po/id.po | 210 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 111 insertions(+), 99 deletions(-) - -commit 3c1e6e5ec856bc4f76c82e52ffc9594cea02f164 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Mon Aug 9 00:43:18 2010 +0300 - - Fix typo in docs - - src/eog-window.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 399d49129aa794d588968f2d4f26477a6069524b -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Aug 8 17:19:57 2010 +0200 - - Make image area background black by default - - Said to improve focussing on the image and avoiding interference from - the UI. Fixes bug 616450. - - data/org.gnome.eog.gschema.xml.in.in | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ed86bde5420559b0624bfaff5c881e934b3d96a3 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Aug 8 17:16:22 2010 +0200 - - Make button text descriptive when setting image as wallpaper - - Fixes bug 625352. - - src/eog-window.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -commit b0f0746c7f2987dc587301ceef7d414da7ab66d0 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Aug 7 00:21:26 2010 +0200 - - Correct EogScrollView's background color preference order - - The override-color needs preference over the other colors. - The background color can't be forced to black for fullscreen otherwise. - - src/eog-scroll-view.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit 804eb812579a1ffab82554a81892df237f430b2c -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Thu Aug 5 01:24:57 2010 +0300 - - Bump version to 2.90.0 - - Now that 2.31.x continues in the gnome-2-32 branch - - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit bf3ddd1bc432fec076e9629e11d3a0085532783c -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Wed Aug 4 20:09:08 2010 +0200 - - Updated Slovenian translation - - po/sl.po | 496 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 268 insertions(+), 228 deletions(-) - -commit 60cc058195e361be27f21b936f6e6e3fde1d7e02 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Wed Aug 4 14:09:10 2010 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 332 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 168 insertions(+), 164 deletions(-) - -commit bfb867b46e27c3eee171a1c94c10f23e5ea2a368 -Author: Dirgita <dirgitadevina@yahoo.co.id> -Date: Wed Aug 4 10:50:18 2010 +0700 - - Updated Indonesian translation - - po/id.po | 1808 +++++++++++++++++++++++++++++++++++++++++--------------------- - 1 file changed, 1186 insertions(+), 622 deletions(-) - -commit 40f3da287b0d9f4b95f2a1a4370e891affb7642a -Author: A S Alam <aalam@users.sf.net> -Date: Wed Aug 4 14:25:51 2010 +0530 - - update Punjabi Translation by A S Alam - - po/pa.po | 638 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 330 insertions(+), 308 deletions(-) - -commit eb0c094e950fce2084165140deac8f1c64e8c46f -Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> -Date: Tue Aug 3 19:49:50 2010 +0300 - - Updated Romanian translation - - po/ro.po | 620 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 337 insertions(+), 283 deletions(-) - -commit 47d1020caa0c4776d13e88215c75244f224ab80f -Author: Ivar Smolin <okul@linux.ee> -Date: Sat Jul 31 09:52:20 2010 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - -commit 7c69b182662f43636b1027fa395f9372593e39bb -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 28 23:04:38 2010 +0200 - - Make the image-gallery-position GSetting an enum - - data/org.gnome.eog.gschema.xml.in.in | 4 ++-- - src/eog-window.c | 10 ++++++---- - 2 files changed, 8 insertions(+), 6 deletions(-) - -commit e8f2f6ecdd99dc5dce35a044e84738fe73f937e0 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 28 22:54:28 2010 +0200 - - Have GSettings use enum for transparency style - - Removes quite a bit of code. Makes it unavailable for - gsettings-data-convert though. - - data/eog.convert | 1 - - data/org.gnome.eog.gschema.xml.in.in | 4 +-- - src/eog-preferences-dialog.c | 59 ++++++++++++++---------------------- - src/eog-scroll-view.c | 35 ++------------------- - 4 files changed, 27 insertions(+), 72 deletions(-) - -commit 28a38946c4871ee00305a4a6c0cf9e48c36e530b -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 28 22:53:43 2010 +0200 - - Use GSettings enum support - - data/Makefile.am | 3 +++ - 1 file changed, 3 insertions(+) - -commit 736a634a376c650810da3d79651c3b1319568663 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 28 22:14:43 2010 +0200 - - Remove old GConf parameter from distcheck params - - Makefile.am | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 310b9fa32ec018c891fc432de1b80fb5185dd8f0 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 28 22:11:52 2010 +0200 - - Remove GConf schemas from translations - - po/POTFILES.in | 1 - - 1 file changed, 1 deletion(-) - -commit e81ac67ce4bd7dc1746022a5b9df9c3758eb35c9 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 28 22:01:05 2010 +0200 - - Don't hardcode GConf as GSettings backend - - This is not really needed anymore and we also want to use features - of dconf soon. - - src/main.c | 2 -- - 1 file changed, 2 deletions(-) - -commit e98adab7da3209c9f193d0df019d5516f82ed967 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 28 22:00:05 2010 +0200 - - Remove unneeded GConf schemas - - They wont't be used anymore. - - configure.ac | 13 +-- - data/Makefile.am | 17 ---- - data/eog.schemas.in | 274 ---------------------------------------------------- - 3 files changed, 3 insertions(+), 301 deletions(-) - -commit 1edaea8623e58c7b37d4e2da11c8c905bfe51ca9 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 28 21:36:03 2010 +0200 - - Add conversion file for gsettings-data-convert - - Uses key names from the last stable series for older keys. So if you - changed your settings since commit ea47 or eog-2.31.4 your settings will - not be ported over. - - data/Makefile.am | 4 ++++ - data/eog.convert | 31 +++++++++++++++++++++++++++++++ - 2 files changed, 35 insertions(+) - -commit 7a85a0a1520b9f21fa44c8e8bd7253624770ca14 -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Wed Jul 28 12:28:37 2010 +0300 - - Updated Hebrew translation. - - po/he.po | 294 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 149 insertions(+), 145 deletions(-) - -commit 0ca29e6bde34e23882fe18df4672817573157659 -Author: Mario Blättermann <mariobl@gnome.org> -Date: Tue Jul 27 23:13:34 2010 +0200 - - [i18n] Updated German translation - - po/de.po | 294 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 149 insertions(+), 145 deletions(-) - -commit 2873692edb6021c0aed6e193e12d06d13814fab3 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Tue Jul 27 17:52:08 2010 +0200 - - Updated Galician translations - - po/gl.po | 296 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 150 insertions(+), 146 deletions(-) - -commit a43eabdb5b4a771710a9a87779366070256f9176 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Mon Jul 26 20:59:35 2010 +0200 - - Updated Spanish translation - - po/es.po | 297 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 150 insertions(+), 147 deletions(-) - -commit 764758f77cbdcd65a1e9b66d502f975aa41ac782 -Author: Eleanor Chen <chenyueg@gmail.com> -Date: Mon Jul 26 23:01:06 2010 +0800 - - Update Simplified Chinese translations. - - po/zh_CN.po | 318 ++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 161 insertions(+), 157 deletions(-) - -commit 20d1a4a24ea4d1ae25cec467ee7be364a8ab82cb -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jul 26 12:39:58 2010 +0200 - - Allow disabling the save-on-close confirmation dialog - - Activating this option reverts eog to the behaviour of before - the dialog was introduced and changes will simply be discarded. - GSettings option only at the moment. Fixes bug #625226. - - data/org.gnome.eog.gschema.xml.in.in | 4 ++++ - src/eog-config-keys.h | 1 + - src/eog-window.c | 7 ++++++- - 3 files changed, 11 insertions(+), 1 deletion(-) - -commit d670f6e23a6d6a640f830c4a1bebaf928a983f23 -Author: drtv <vasudeven@git.gnome.org> -Date: Sun Jul 25 15:06:35 2010 +0530 - - Updated Tamil translation - - po/ta.po | 523 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 288 insertions(+), 235 deletions(-) - -commit 8c0e09a2433199d96b784fd5d2aed3508eb7f3b3 -Author: Xandru Armesto <xandru@softastur.org> -Date: Fri Jul 23 18:19:41 2010 +0200 - - Updated asturian translation - - po/ast.po | 1188 ++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 694 insertions(+), 494 deletions(-) - -commit af3c9a45dcbf2adccdbcd3d9816fca65a2e0263c -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jul 22 19:40:19 2010 +0200 - - Don't try to set the scrollview's parent's shadow-type property - - With commit e41b97bb the parent switched from a GtkFrame to a GtkHPaned - which doesn't have that property. - - src/eog-window.c | 8 -------- - 1 file changed, 8 deletions(-) - -commit 80674c0f4ea6c23afc7872db8365f072046187e4 -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jul 22 19:38:00 2010 +0200 - - Remove now unnecessary GTK_CHECK_VERSION switches - - We use GTK+-3 and and would always pass each of these checks now. - - src/eog-window.c | 28 ---------------------------- - 1 file changed, 28 deletions(-) - -commit 1b66c6acb2c0ca775d294e72ef542f7a91538ba1 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 21 22:48:04 2010 +0200 - - Disable Python plugins since they don't work with GTK+-3 yet - - Porting to libpeas is likely a better approach than waiting for - PyGTK-3 as introspection will then hopefully relieve us from - hand-maintaining the Python API. - - configure.ac | 3 +++ - 1 file changed, 3 insertions(+) - -commit e580844febda5f1cbffabc8412e7889250cb827c -Author: Florian Müllner <fmuellner@gnome.org> -Date: Tue Jul 13 07:51:38 2010 +0200 - - Request a dark theme variant - - GTK+-3.0 introduces the possibility for applications to request - dark theme variants, aimed mainly at display centric applications - like movie players or viewers. - Eog obviously fits the bill, so it should follow Totem's lead ... - - https://bugzilla.gnome.org/show_bug.cgi?id=624262 - - src/main.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -commit d166ba737cf86d5e17d896c44ef42e0863616b0c -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 21 22:31:57 2010 +0200 - - Update eog.pc for GTK+-3 - - Depend on the correct GTK version and remove the unneeded GConf - dependency as plugins needing it should depend in it themselves. - - data/eog.pc.in | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 18ae8aafc996693998cd093ce71ed9ccccd1b884 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jul 21 22:24:26 2010 +0200 - - Adapt to recent GTK+-3 API changes in GtkNotebook - - Once version 2.90.6 is out the GTK_CHECK_VERSION switch can go out - and eog instead depend on that version in configure. - - src/eog-properties-dialog.c | 4 ++++ - 1 file changed, 4 insertions(+) - -commit 82785ea392f4d5eea0c0048cc16ed3386d28567e -Author: Florian Müllner <fmuellner@gnome.org> -Date: Tue Jul 13 07:51:32 2010 +0200 - - Compile against GTK+-3.0 - - Replace the removed GdkRegion API with the corresponding - cairo_region_t API and switch the build to GTK+-3.0. - - https://bugzilla.gnome.org/show_bug.cgi?id=624261 - - configure.ac | 12 ++++++------ - src/eog-scroll-view.c | 9 ++++----- - 2 files changed, 10 insertions(+), 11 deletions(-) - -commit 8dddacf02b46d83824c56d0a7f51dde2056eebb2 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jul 19 21:44:32 2010 +0200 - - Add gtk-doc annotations to the new properties - - src/eog-scroll-view.c | 13 ++++++++++++- - 1 file changed, 12 insertions(+), 1 deletion(-) - -commit bfef239942645fff4a5efe71d801ccb92a185cf7 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jul 19 21:38:02 2010 +0200 - - Set zoomed out antialiasing using a GSettings binding - - Moved to EogScrollView from EogWindow. - - src/eog-scroll-view.c | 18 ++++++++++++++++++ - src/eog-window.c | 31 ------------------------------- - 2 files changed, 18 insertions(+), 31 deletions(-) - -commit 15917972d9a60fc185b1cc9a7b4e304952c49d2d -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jul 19 21:32:04 2010 +0200 - - Set zoomed in antialiasing using a GSettings binding - - Again less work for EogWindow. - - src/eog-scroll-view.c | 18 ++++++++++++++++++ - src/eog-window.c | 29 ----------------------------- - 2 files changed, 18 insertions(+), 29 deletions(-) - -commit e7243a9ddad0f31f8759aadbd92ad551781b8480 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jul 19 21:10:40 2010 +0200 - - Handle EogScrollView's instance initialization in the right function - - Moves most of the other stuff done in eog_scroll_view_new - over to eog_scroll_view_init. - - src/eog-scroll-view.c | 152 +++++++++++++++++++++++++++----------------------- - 1 file changed, 81 insertions(+), 71 deletions(-) - -commit a3042084fab9da4ed2c5418716044368eda135ef -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jul 18 23:53:03 2010 +0200 - - Mark startup-flags property as GFlags which it actually is. - - Instead of using some strange guchar magic. - - src/eog-window.c | 11 ++++++----- - 1 file changed, 6 insertions(+), 5 deletions(-) - -commit d974945341b974d602a9f42565fdc47a61c9eda7 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jul 18 23:45:11 2010 +0200 - - Don't assert when accessing unknown EogWindow properties - - Use G_OBJECT_WARN_INVALID_PROPERTY_ID to emit a warning instead. - - src/eog-window.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 0c327b7ec802a07f53da04f5dc484e646548b552 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jul 18 23:41:55 2010 +0200 - - Determine gallery position and size using a GSettings binding - - Prepare everything for the use of GSettings' enum support for this. - - src/eog-window.c | 94 ++++++++++++++++++++++++++++++++++---------------------- - src/eog-window.h | 7 +++++ - 2 files changed, 65 insertions(+), 36 deletions(-) - -commit f4726d4facf7a2ebb616ba46ec20f12f1084cdde -Author: Mario Blättermann <mariobl@gnome.org> -Date: Sun Jul 18 20:44:47 2010 +0200 - - [i18n] Updated German translation - - po/de.po | 256 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 119 insertions(+), 137 deletions(-) - -commit ec93e7f2c26a09a69dbc93241a50badccb0f6b21 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jul 18 19:52:40 2010 +0200 - - Add gtk-doc annotations to the new properties in EogScrollView - - src/eog-scroll-view.c | 11 +++++++++++ - 1 file changed, 11 insertions(+) - -commit acdafc3563c5c88d3c2d2a25e4602d774dad92fa -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jul 18 19:46:06 2010 +0200 - - Set transparency style using GSettings - - Another callback less from EogWindow. - This will be migrated to use GSetting's enum support soon. - - src/eog-scroll-view.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ - src/eog-window.c | 42 ------------------------------------------ - 2 files changed, 49 insertions(+), 42 deletions(-) - -commit a7d7b35fc1eb92e17901ec9e9054db0f35f2ad80 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jul 18 19:25:59 2010 +0200 - - Reflect transparency color API changes in Python bindings - - bindings/python/eog.defs | 10 +++++++++- - 1 file changed, 9 insertions(+), 1 deletion(-) - -commit 2a4e4c30e4a41a1f4b7b452243a56851cdebe442 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jul 18 19:22:06 2010 +0200 - - Set transparency fill color using GSettings - - Saves some callbacks from EogWindow. - - src/eog-scroll-view.c | 69 ++++++++++++++++++++++++++++++++++++++------------- - src/eog-scroll-view.h | 3 ++- - src/eog-window.c | 58 +++---------------------------------------- - 3 files changed, 58 insertions(+), 72 deletions(-) - -commit c10376c1f39dbaa43ede116831861adf72e19645 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Sun Jul 18 18:27:05 2010 +0200 - - Fixed headers in galician translation file - - po/gl.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit da215f780c5885d24e51c01b7da48ede713e97b0 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Sun Jul 18 18:25:31 2010 +0200 - - Fixed headers in galician translation file - - po/gl.po | 28 +++++++++++++++++----------- - 1 file changed, 17 insertions(+), 11 deletions(-) - -commit e41b97bbb5dc56cb49cbda638081f4312dd39df4 -Author: Florian Müllner <fmuellner@gnome.org> -Date: Tue Jul 13 07:51:09 2010 +0200 - - Remove frame around image view - - Quoting Hylke Bons: - "[...] it doesn't have a purpose and only causes visual clutter." - - https://bugzilla.gnome.org/show_bug.cgi?id=614807 - - src/eog-window.c | 9 +-------- - 1 file changed, 1 insertion(+), 8 deletions(-) - -commit 47fd09997d07d968bab511cd5b84900fbc923ea5 -Author: Sense Hofstede <qense@ubuntu.com> -Date: Sun Jul 18 02:13:40 2010 +0200 - - Updated Frisian translation and added it to the LINGUAS file - - po/LINGUAS | 1 + - po/fy.po | 1430 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1431 insertions(+) - -commit ee24db099553b7b1e1b92f11ed48c03f53f91269 -Author: Claude Paroz <claude@2xlibre.net> -Date: Sat Jul 17 15:30:18 2010 +0200 - - Updated French translation - - Contributed by Laurent Coudeur and Claude Paroz - - po/fr.po | 523 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 281 insertions(+), 242 deletions(-) - -commit 2871e19740c29f2b26b8e6c6413d237417cfcada -Author: Aron Xu <aronxu@gnome.org> -Date: Wed Jul 14 20:38:24 2010 +0800 - - Update Simplified Chinese help figures. - - help/zh_CN/figures/eog_start_window.png | Bin 13260 -> 20708 bytes - help/zh_CN/figures/eog_toolbar_editor_window.png | Bin 0 -> 37628 bytes - 2 files changed, 0 insertions(+), 0 deletions(-) - -commit bcc9545c697caceef9600823cd3da913ee662ab1 -Author: 朱涛 <bill_zt@sina.com> -Date: Wed Jul 14 20:38:05 2010 +0800 - - Update Simplified Chinese help translation. - - help/zh_CN/zh_CN.po | 2154 ++++++++++++++++++++++++++++++++++++++------------- - 1 file changed, 1617 insertions(+), 537 deletions(-) - -commit 2de563a9e73a8fe9f93735d8af74a3a9f7cbfc2c -Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> -Date: Wed Jul 14 19:50:10 2010 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 506 +++++++++++++++++++++++++++++++---------------------------- - po/zh_TW.po | 512 ++++++++++++++++++++++++++++++++---------------------------- - 2 files changed, 545 insertions(+), 473 deletions(-) - -commit 2d9d10ea7f89d5092c4b8901ea31ad00337157bf -Author: Eleanor Chen <chenyueg@gmail.com> -Date: Wed Jul 14 11:27:56 2010 +0800 - - Update Simplified Chinese translations. - - po/zh_CN.po | 720 +++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 371 insertions(+), 349 deletions(-) - -commit 6ef8f1fdd381ba79cad3ade0218aa78adbab861b -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Tue Jul 13 03:36:33 2010 +0300 - - Updated Hebrew translation. - - po/he.po | 224 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 116 insertions(+), 108 deletions(-) - -commit 1661d1a28020ae8ea02d3f817261b2edbb0bc45d -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Sun Jul 11 16:26:57 2010 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 233 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 121 insertions(+), 112 deletions(-) - -commit cd55b85e3371e071ca7209e7f88c295cdb641b91 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Wed Jul 7 18:01:11 2010 +0200 - - Updated Galician translations - - po/gl.po | 234 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 121 insertions(+), 113 deletions(-) - -commit 5874f54949ec72a5ed28b61feb5c3008d1532663 -Author: Ivar Smolin <okul@linux.ee> -Date: Wed Jul 7 17:13:34 2010 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - -commit cf491e411ecacd1498c14c3fe6a579b1a84e8bf5 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Tue Jul 6 05:17:25 2010 +0200 - - Updated Spanish translation - - po/es.po | 224 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 117 insertions(+), 107 deletions(-) - -commit 6a7b1bde17eccc47b1af09b2022586926f7b9f42 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jul 5 21:57:27 2010 +0200 - - Re-add P as shortcut to pause the slideshow - - Happens in the KeyEvent handler as it's not working when linking the - shortcut key to the PauseSlideshow action. Fixes bug #553283. - - src/eog-window.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - -commit cc27fe8575eb92cb13fc0ae4e5ae7e514b58b6e7 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jul 5 21:42:00 2010 +0200 - - Add toolbar button to pause the slideshow - - Basically switches between standard fullscreen and slideshow. - Fixes bug #618886. - - data/eog-ui.xml | 2 ++ - src/eog-window.c | 43 +++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 45 insertions(+) - -commit 81f93b598e10b747bac692af4512599898efa814 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jun 28 23:44:31 2010 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 822fbc1e2762f62e71bf2391d28d4b0d47947d7a -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jun 28 23:39:43 2010 +0200 - - Update for release 2.31.4 - - NEWS | 33 +++++++++++++++++++++++++++++++++ - 1 file changed, 33 insertions(+) - -commit 21ced20430078aaa283b7925ce282ebb54e05e5d -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jun 27 14:16:07 2010 +0200 - - Switch EogPropertiesDialog netbook mode using a GSettings binding - - src/eog-window.c | 34 ++++------------------------------ - 1 file changed, 4 insertions(+), 30 deletions(-) - -commit c630747b02a9589a993c28d244448cdc291131e8 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 26 18:10:43 2010 +0200 - - Add API docs for EogScrollView's new properties - - src/eog-scroll-view.c | 14 +++++++++++++- - 1 file changed, 13 insertions(+), 1 deletion(-) - -commit 8c7cf9f8938673eda2843be650b558084b44303e -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 26 17:59:17 2010 +0200 - - Switch scrollwheel zoom setting with GSettings - - Drops another simple value-forwarding signal callback from EogWindow. - - src/eog-scroll-view.c | 19 +++++++++++++++++-- - src/eog-window.c | 32 ++------------------------------ - 2 files changed, 19 insertions(+), 32 deletions(-) - -commit 0cadaebd5c7561991eceaf3ed9af32f50e63b1e9 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 26 17:47:05 2010 +0200 - - Bind zoom multiplier to GSettings instead of setting it by hand - - Another callback less in EogWindow. - - src/eog-scroll-view.c | 17 ++++++++++++++++- - src/eog-window.c | 32 ++------------------------------ - 2 files changed, 18 insertions(+), 31 deletions(-) - -commit 0a898703a9a19589e049a73d21c91898b0dbc51e -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 26 17:19:06 2010 +0200 - - Have the ThumbNav's scrollbuttons bound to the GSettings key - - One signal callback less in EogWindow. - The setting is not updated on changes to the property (eg. by plugins). - - src/eog-window.c | 31 ++++--------------------------- - 1 file changed, 4 insertions(+), 27 deletions(-) - -commit 330c8b841a4f8d9af9b11c76e0d5eb01dce9837c -Author: Gil Forcada <gforcada@gnome.org> -Date: Sat Jun 26 12:22:09 2010 +0200 - - Updated Catalan translation - - help/ca/ca.po | 17 ++++++----------- - 1 file changed, 6 insertions(+), 11 deletions(-) - -commit c88808f4c06872c904da52595c6f8550da87f1e3 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jun 23 23:18:02 2010 +0200 - - Avoid walking string arrays from GSettings when converting to GSLists - - The arrays are returned NULL-terminated by GSettings. Making use of this - we don't need to walk the array first to get it's size when converting - it to a GSList. - - src/eog-plugin-engine.c | 7 ++----- - 1 file changed, 2 insertions(+), 5 deletions(-) - -commit 643d8f405a2cfcb2a7fae702591aab7b3077a209 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jun 23 23:06:47 2010 +0200 - - Remove pre-GLib-2.25.8 compatibility code - - We depend on 2.25.9 now so these won't be needed any longer. - - src/eog-plugin-engine.c | 10 ---------- - 1 file changed, 10 deletions(-) - -commit 4c340931764d65bd53a4ed53082f92302e942fc4 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Tue Jun 22 23:01:53 2010 +0200 - - Updated Spanish translation - - po/es.po | 16 +++++++--------- - 1 file changed, 7 insertions(+), 9 deletions(-) - -commit 2ceb16357b385525b60babef6279ddb7d1185d46 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Tue Jun 22 21:11:44 2010 +0200 - - Updated Spanish translation - - po/es.po | 32 +++++++------------------------- - 1 file changed, 7 insertions(+), 25 deletions(-) - -commit 5f1a6c32e8b88029803d9d2356bef4c402a3dc0d -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Mon Jun 21 10:32:44 2010 +0300 - - Updated Hebrew translation - - po/he.po | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 77c60139d5c7e1ddd51c8d553a642af6683ea0c6 -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Sat Jun 19 19:26:14 2010 +0300 - - Updated Hebrew translation. - - po/he.po | 513 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 258 insertions(+), 255 deletions(-) - -commit 3d34c9e9242209c769417db4f4f9a2d6bf0a58e7 -Author: Ivar Smolin <okul@linux.ee> -Date: Sat Jun 19 17:49:53 2010 +0300 - - [l10n] Updated Estonian translation - - po/et.po | 69 ++++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 34 insertions(+), 35 deletions(-) - -commit f28fa11035fbbb3715641e9924313547e32d1fb2 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Sat Jun 19 12:24:29 2010 +0200 - - Added Norwegian bokmål translation - - po/nb.po | 26 ++++++++++++++------------ - 1 file changed, 14 insertions(+), 12 deletions(-) - -commit ad75397562e3e253dac29846351259274cefc16d -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jun 18 22:56:03 2010 +0200 - - Update POTFILES.in to include eog-application.c - - The recent totem-scrsaver updates introduced a translatable string here. - - po/POTFILES.in | 1 + - 1 file changed, 1 insertion(+) - -commit b222bb232cf40336145c7450a8dc51536eab939e -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jun 18 22:45:36 2010 +0200 - - Depend on GIO 2.25.9 for latest GDBus patches - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 0ceccc72264ec27d56689846af88e73759cad2aa -Author: Florian Müllner <fmuellner@gnome.org> -Date: Fri Jun 18 15:42:34 2010 +0000 - - Adapt to GDBus API change - - cut-n-paste/totem-screensaver/totem-scrsaver.c | 77 +++++++++++++------------- - 1 file changed, 40 insertions(+), 37 deletions(-) - -commit 63b4670443d0900f3203bd8ca2cd3fd84c82f9e9 -Author: Bastien Nocera <hadess@hadess.net> -Date: Sun Jun 13 13:31:40 2010 +0100 - - Update totem-scrsaver from upstream - - Update from recent evince and totem changes, port to libgdbus. - - https://bugzilla.gnome.org/show_bug.cgi?id=621439 - - configure.ac | 2 +- - cut-n-paste/totem-screensaver/totem-scrsaver.c | 382 +++++++++++++++---------- - cut-n-paste/totem-screensaver/totem-scrsaver.h | 24 +- - po/POTFILES.in | 1 - - src/eog-application.c | 5 +- - 5 files changed, 242 insertions(+), 172 deletions(-) - -commit 523ed9e67749b94baee6d77c4273d1abb2cc7229 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Fri Jun 18 21:25:11 2010 +0200 - - Updated Galician translations - - po/gl.po | 272 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 136 insertions(+), 136 deletions(-) - -commit e636f3d7af15a0a902d492a4e35a25b71b26f320 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Thu Jun 17 07:27:38 2010 +0200 - - Updated Spanish translation - - help/es/es.po | 163 ++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 106 insertions(+), 57 deletions(-) - -commit 3fbb4d82b360d94217cb02dd6455bd5c2e2ae269 -Author: Timo Jyrinki <timo.jyrinki@iki.fi> -Date: Wed Jun 16 23:33:09 2010 +0300 - - Add Finnish help translation by Jukka Heikkilä. - - help/Makefile.am | 2 +- - help/fi/fi.po | 1510 +++++++++++++++++++++++++ - help/fi/figures/eog_save_as_window.png | Bin 0 -> 25648 bytes - help/fi/figures/eog_start_window.png | Bin 0 -> 14190 bytes - help/fi/figures/eog_toolbar_editor_window.png | Bin 0 -> 22618 bytes - 5 files changed, 1511 insertions(+), 1 deletion(-) - -commit 68238a695a7b256d8db8a356d940ce636ede0fc7 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Wed Jun 16 06:21:25 2010 +0200 - - Updated Spanish translation - - po/es.po | 116 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--------- - 1 file changed, 101 insertions(+), 15 deletions(-) - -commit f6be24f5b3d2c015946c07a5d61f6fa03cf94e1e -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Wed Jun 16 06:17:18 2010 +0200 - - Updated Spanish translation - - po/es.po | 534 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 252 insertions(+), 282 deletions(-) - -commit 548e96ae2ef33d2ee58454cd00eab1a8e813f8e7 -Author: Claudio Saavedra <csaavedra@igalia.com> -Date: Tue Jun 15 18:47:18 2010 +0300 - - Fix build without libjpeg - - AM_CONDITIONAL calls should be called always, otherwise configure - gets confused. - - Fixes bug #621616. - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 5d25772d45cee96633d8804e5e13211253db1621 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Sun Jun 13 23:35:33 2010 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 434 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 231 insertions(+), 203 deletions(-) - -commit 009a8205ccee9446a703b864e6baf81febe9b080 -Author: Mario Blättermann <mariobl@gnome.org> -Date: Sun Jun 13 21:14:35 2010 +0200 - - Updated German doc translation - - help/de/de.po | 580 +++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 309 insertions(+), 271 deletions(-) - -commit 47b84374f549e7c8b84497ad47a883c0a363dc77 -Author: Mario Blättermann <mariobl@gnome.org> -Date: Sun Jun 13 20:49:16 2010 +0200 - - Updated German translation - - po/de.po | 563 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 317 insertions(+), 246 deletions(-) - -commit 7d202bcf8df2563cd965b65930ff7a1ea32436bd -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jun 13 13:27:29 2010 +0200 - - Rename "Image Collection" to "Image Gallery" - - This is more fitting. Based on propsal by Allan Day. Fixes bug #618304. - - data/eog-toolbar.xml | 2 +- - data/eog-ui.xml | 4 +- - data/eog.schemas.in | 20 +-- - data/gtkrc | 4 +- - data/icons/16x16/Makefile.am | 2 +- - ...-image-collection.png => eog-image-gallery.png} | Bin - data/icons/22x22/Makefile.am | 2 +- - ...-image-collection.png => eog-image-gallery.png} | Bin - data/icons/24x24/Makefile.am | 2 +- - ...-image-collection.png => eog-image-gallery.png} | Bin - data/icons/32x32/Makefile.am | 4 +- - ...-image-collection.png => eog-image-gallery.png} | Bin - ...-image-collection.svg => eog-image-gallery.svg} | 0 - data/icons/scalable/Makefile.am | 2 +- - ...-image-collection.svg => eog-image-gallery.svg} | 0 - data/org.gnome.eog.gschema.xml.in.in | 14 +- - help/C/eog.xml | 18 +-- - src/eog-config-keys.h | 6 +- - src/eog-thumb-nav.c | 2 +- - src/eog-window.c | 164 +++++++++++---------- - src/eog-window.h | 2 +- - src/main.c | 8 +- - 22 files changed, 129 insertions(+), 127 deletions(-) - -commit 0365c8aa6b6ffb7e75af91234bfeb3aa651bb52a -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Sun Jun 13 01:42:34 2010 +0200 - - Updated Galician translations - - po/gl.po | 18 +++++++++--------- - 1 file changed, 9 insertions(+), 9 deletions(-) - -commit d47a84c1eb94518e9f82ab084964588344316570 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Sat Jun 12 19:08:28 2010 +0200 - - Updated Galician translations - - po/gl.po | 236 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 118 insertions(+), 118 deletions(-) - -commit cd8d7e15cca41fa2234a8c2c87944d722ff6dfb4 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Sat Jun 12 19:06:36 2010 +0200 - - Updated Galician translations - - po/gl.po | 390 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 213 insertions(+), 177 deletions(-) - -commit 573d5af2fe62d32972cce7b6089aabf6f34a79b5 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jun 9 23:18:12 2010 +0200 - - Support using a sealed GDK library - - Only works reliable as of GDK-2.21.2 due to API changes in that - version. - - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 14 ++++++++++++++ - src/eog-window.c | 5 +++++ - 2 files changed, 19 insertions(+) - -commit ff509b7df8fd17abceceb2baa37ef4d45b301461 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 12 18:52:53 2010 +0200 - - Make GSettings key description match the GConf one - - Saves one wrong translation. - - data/org.gnome.eog.gschema.xml.in.in | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ea478326b68a8eba0a119eec92ac5374c00fe2b3 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 12 18:52:12 2010 +0200 - - Make GConf keys match the new GSettings keys - - data/eog.schemas.in | 58 ++++++++++++++++++++++++++--------------------------- - 1 file changed, 29 insertions(+), 29 deletions(-) - -commit 6cb2ce2c72ce91f4f56d9110d7326e5ede86d7f9 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 12 18:48:54 2010 +0200 - - Make forgotten GSettings keys use the key macros - - src/eog-window.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -commit afac01c63d764fc1b111698ef0b76473e8cfc96d -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 12 18:46:28 2010 +0200 - - Make GSettings keys follow the new naming conventions - - This caused build failures for other modules, so we had to do it now. - Fixes bug #621370. - - data/Makefile.am | 3 +-- - data/org.gnome.eog.gschema.xml.in.in | 26 +++++++++++++------------- - src/eog-config-keys.h | 24 ++++++++++++------------ - 3 files changed, 26 insertions(+), 27 deletions(-) - -commit 41a34c8a7389d238b7e7fb936fe8c430ff4e4311 -Author: Kristjan Schmidt <kristjan.schmidt@googlemail.com> -Date: Wed Jun 9 18:30:37 2010 +0200 - - Add Esperanto translation - - po/LINGUAS | 1 + - 1 file changed, 1 insertion(+) - -commit 1bc159046d15a445ff4f0fc64243704436a242c4 -Author: Kristjan Schmidt <kristjan.schmidt@googlemail.com> -Date: Wed Jun 9 18:30:35 2010 +0200 - - Add Esperanto translation - - po/eo.po | 1427 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 1427 insertions(+) - -commit 36657892fb847228d0b0f614c19b03c2441f32ee -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jun 7 22:51:56 2010 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit f2aaad9d04254543486b9016001fc421d3776a0b -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jun 7 22:49:51 2010 +0200 - - Readd GConf schema definition to tarball - - At least until we don't use GConf anymore. - - data/Makefile.am | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -commit 02caffcf23cf4d2e802f32fbe57f875b724b70de -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jun 7 22:46:03 2010 +0200 - - Prepare for release 2.31.3 - - NEWS | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - -commit ddc6aba85b8df524e918fa37e88bd5be8797a068 -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Mon Jun 7 16:12:44 2010 +0300 - - Updated Hebrew translation. - - po/he.po | 403 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 220 insertions(+), 183 deletions(-) - -commit 3377dc887ccf8caab4bc69fc69d2320c6e947628 -Author: Ivar Smolin <okul@linux.ee> -Date: Mon Jun 7 10:48:33 2010 +0300 - - Estonian translation updated - - po/et.po | 48 +++++++++++++++++++++++++++++++----------------- - 1 file changed, 31 insertions(+), 17 deletions(-) - -commit caf81e8f9e27419dd8ec96ebaaf616b669e04977 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jun 6 22:07:08 2010 +0200 - - Allow setting a user-defined background color - - This allows the user to have another color instead of the theme defined - color as background. For now requires a loaded image until we can - finally fix bug 538279. Fixes bug 502992. - - data/eog-preferences-dialog.ui | 595 ++++++++++++----------------------- - data/org.gnome.eog.gschema.xml.in.in | 10 + - src/eog-config-keys.h | 2 + - src/eog-preferences-dialog.c | 13 + - src/eog-scroll-view.c | 93 +++++- - src/eog-scroll-view.h | 2 +- - 6 files changed, 315 insertions(+), 400 deletions(-) - -commit 4087bc9130b489935a6460061d166ef23524bf7f -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jun 6 16:41:26 2010 +0200 - - [GSettings] Fix whitespace errors - - src/eog-plugin-engine.c | 2 +- - src/eog-window.c | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit 2ef93aa989530950c675a336661475afd29cd1e6 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jun 6 16:31:31 2010 +0200 - - [GSettings] Remove more unneeded gconf-client.h includes - - src/eog-file-chooser.c | 2 -- - 1 file changed, 2 deletions(-) - -commit 1207e0f363e06f977eb6f9fb82519f9d421845ad -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jun 6 16:16:19 2010 +0200 - - [GSettings] Remove now obsolete gconf_client_add_dir call - - src/eog-config-keys.h | 1 - - src/eog-window.c | 4 ---- - 2 files changed, 5 deletions(-) - -commit edd73fd3f31d7e9e10729546643b4a06a9d58572 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jun 6 16:12:26 2010 +0200 - - [GSettings] Port EogPluginEngine to GSettings - - Reuses the GSettings list helpers from gedit by Ignacio Casal Quinteiro, - modified to empty lists. Also has a temporary workaround for an API - change in the upcoming glib-2.25.8 which can go out again once we can - hard-depend on that version. - - src/eog-config-keys.h | 2 +- - src/eog-plugin-engine.c | 150 +++++++++++++++++++++++++++++------------------- - 2 files changed, 93 insertions(+), 59 deletions(-) - -commit 8a554fc717522b12b79260c82ad6328760cfcf8e -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jun 6 14:44:09 2010 +0200 - - [GSettings] Turn settings keys into preprocessor macros again - - src/eog-config-keys.h | 49 +++++++++++--------- - src/eog-preferences-dialog.c | 43 +++++++++--------- - src/eog-window.c | 105 +++++++++++++++++++++++++------------------ - 3 files changed, 109 insertions(+), 88 deletions(-) - -commit 68f8d67f01435f840a8fbff976e056f091b6c436 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 5 17:17:03 2010 +0200 - - [GSettings] Hook GSettings schema into intltool - - These translations seem to be of no use yet, but we avoid possibly - losing the former GConf schema translations this way. - - configure.ac | 1 + - data/org.gnome.eog.gschema.xml | 114 ----------------------------------- - data/org.gnome.eog.gschema.xml.in.in | 114 +++++++++++++++++++++++++++++++++++ - po/POTFILES.in | 1 + - po/POTFILES.skip | 1 + - 5 files changed, 117 insertions(+), 114 deletions(-) - -commit 5090409a75274ac091901c9afe7d02d06e9e1ad2 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 5 16:57:10 2010 +0200 - - [GSettings] Migrate EogWindow to GSettings as fas as currently possible - - This is a dumb migration. It's not taking any advantage of - GSettings' advanced features yet, as the task was to get it running - first. Next would be moving several settings onto EogScrollView itself. - Also some settings still use GConf as they belong to other packages. - - src/eog-window.c | 431 ++++++++++++++++++++----------------------------------- - 1 file changed, 156 insertions(+), 275 deletions(-) - -commit dd7c43457ac1602e49e43a4d79ad26dd09aeaad8 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jun 5 12:45:30 2010 +0200 - - [GSettings] Call glib-compile-schemas with allow-any-name parameter for now - - This needed as our schema keys are not yet following the new naming - scheme. Until we've fixed them we need to override this error check. - - data/Makefile.am | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit 667693ec829779ae96cb2c9b2fb0e692796c1d2e -Author: Felix Riemann <friemann@gnome.org> -Date: Sun May 30 22:52:07 2010 +0200 - - [GSettings] Convert EogPreferencesDialog to GSettings - - src/eog-preferences-dialog.c | 287 ++++++++++--------------------------------- - src/eog-preferences-dialog.h | 4 +- - src/eog-window.c | 3 +- - 3 files changed, 69 insertions(+), 225 deletions(-) - -commit e5dd87f49e311b11681c84b06254ff2bc675d676 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun May 30 22:49:10 2010 +0200 - - [GSettings] Add GSettings schema file - - configure.ac | 1 + - data/Makefile.am | 13 +++-- - data/org.gnome.eog.gschema.xml | 114 +++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 124 insertions(+), 4 deletions(-) - -commit 7ad810cd28733d3288665dbdc77ef582ec321fb2 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun May 30 15:00:47 2010 +0200 - - [GSettings] Use the gconf GSettings backend - - At least until the whole desktop is migrated. - - src/main.c | 2 ++ - 1 file changed, 2 insertions(+) - -commit a288a19e78bcf23edd60b6d07250f198f792326b -Author: Felix Riemann <friemann@gnome.org> -Date: Sun May 30 15:00:10 2010 +0200 - - [GSettings] Bump GLib and GConf requirements for GSettings migration - - GConf 2.31+ is only needed for the corresponding backend - until the whole desktop is converted. - - configure.ac | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -commit 0ac09ea58b240285b7e57ff1498b23a8b704b882 -Author: Sira Nokyoongtong <gumaraa@gmail.com> -Date: Fri Jun 4 21:02:55 2010 +0700 - - Updated Thai translation. - - po/th.po | 664 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 333 insertions(+), 331 deletions(-) - -commit b9c1cb99bf7b6df3c9d7af00996fdc704732e45f -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jun 3 23:30:39 2010 +0200 - - Move Python.h include into the right spot - - Python.h is required to be included before any standard header. - Also it's not needed in its old position, but is in its new. - This fixes compiler warnings about redefining _POSIX_C_SOURCE. - - src/eog-python-module.c | 4 ++++ - src/eog-python-module.h | 1 - - 2 files changed, 4 insertions(+), 1 deletion(-) - -commit d1fb2e4b8f74b4944af86347654dd57e22358230 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun May 30 22:52:28 2010 +0200 - - Remove unneeded gconf-client.h include - - src/main.c | 1 - - 1 file changed, 1 deletion(-) - -commit c8c35a264eddbc68197d76dc58de17960ec5366d -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jun 3 23:06:04 2010 +0200 - - Possibly delete the SVG background when changing the background color - - If the transparency is set to show the viewing area's background color - while changing the area's color the SVG background needs to be updated. - To achieve this it's simply deleted. The next redraw, which will be - triggered by changing the view's background color, will recreate it. - - src/eog-scroll-view.c | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - -commit 6d72a53126dd881fac55280b27b06be659335696 -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jun 3 23:01:34 2010 +0200 - - Delete SVG background when changing transparency settings - - This has it recreated with the correct transparency settings on the next - redraw (which is triggered directly afterwards). Fixes wrong SVG display - when changing the transparency settings with an image loaded. - - src/eog-scroll-view.c | 5 +++++ - 1 file changed, 5 insertions(+) - -commit b065620dbed2101c40fbf97e1e0f18e99dd9825d -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jun 3 21:07:52 2010 +0200 - - Fix API docs about new background color property - - src/eog-scroll-view.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 81c54cef2b4017b1a510e4d4d3d163799e8540fb -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jun 3 17:20:18 2010 +0200 - - Cleanup the updating code for the two bg color fields in EogScrollView - - Looks a lot cleaner now. - - src/eog-scroll-view.c | 71 +++++++++++++++++++++++---------------------------- - 1 file changed, 32 insertions(+), 39 deletions(-) - -commit c42a931817a07554379d90c44d5923b358a9998b -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Jun 3 16:52:27 2010 +0200 - - Add fallback background color support to EogScrollView - - This allows to temporarily set the view's background color and fallback - to a predetermined default or the theme's color. Necessary to make the - color user settable and still allowing us to override it, e.g. for the - fullscreen mode. - - src/eog-scroll-view.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++++-- - src/eog-scroll-view.h | 5 +- - src/eog-window.c | 5 +- - 3 files changed, 150 insertions(+), 6 deletions(-) - -commit 2f6bd8b2bb348c8875157d6fd5b4dfae76686e79 -Author: Yaron Shahrabani <sh.yaron@gmail.com> -Date: Thu May 27 17:32:58 2010 +0300 - - Updated Hebrew translation. - - po/he.po | 284 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 144 insertions(+), 140 deletions(-) - -commit 4aee935ab8a3794dae3b02b1f3d3fbb1f7cb763d -Author: Felix Riemann <friemann@gnome.org> -Date: Tue May 25 21:14:16 2010 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 6c5d8107af975db20f738f0f57fe7ccfb7fdf9f8 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue May 25 21:06:08 2010 +0200 - - Prepare for release 2.31.2 - - NEWS | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - -commit a7744868630186234e1918739d937391ba790667 -Author: Wouter Bolsterlee <wbolster@gnome.org> -Date: Sun May 23 14:23:20 2010 +0200 - - Dutch translation updated by Wouter Bolsterlee - - po/nl.po | 282 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 144 insertions(+), 138 deletions(-) - -commit 3dde1e5ebc0364851b561e9243a26717df947a72 -Author: Thomas Thurman <tthurman@gnome.org> -Date: Mon May 17 13:23:02 2010 -0400 - - Update Shavian translation - - po/en@shaw.po | 209 ++++++++++++++++++---------------------------------------- - 1 file changed, 65 insertions(+), 144 deletions(-) - -commit acf50a975145771c9de3158fba0080bca5806333 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Fri May 14 20:15:12 2010 +0200 - - Updated Slovenian translation - - po/sl.po | 450 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 226 insertions(+), 224 deletions(-) - -commit ef490b69f6edddc4b3ed739feefa0302f07a59d9 -Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> -Date: Fri May 14 00:26:59 2010 +0300 - - Updated Belarusian translation - - po/be.po | 2311 ++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 1038 insertions(+), 1273 deletions(-) - -commit 5078ea5e0a38c898c26f35fa8b22568f19ca72c6 -Author: Felix Riemann <friemann@gnome.org> -Date: Thu May 13 21:37:41 2010 +0200 - - Finish making EogScrollView GSEAL-compatible. - - Eog should be completely GSEAL-compatible now. - Completes bug 606883. - - src/eog-scroll-view.c | 62 ++++++++++++++++++++++++++++----------------------- - 1 file changed, 34 insertions(+), 28 deletions(-) - -commit 7dd81d8d4b1a67a89cb33880df48a63a464db4dd -Author: Felix Riemann <friemann@gnome.org> -Date: Thu May 13 21:22:45 2010 +0200 - - Make the easy parts of EogScrollView GSEAL-compatible - - Part of bug 606883. - - src/eog-scroll-view.c | 98 ++++++++++++++++++++++++++------------------------- - 1 file changed, 50 insertions(+), 48 deletions(-) - -commit 2fc271e3b0c918ee07608efc96bc9e7890be56be -Author: Felix Riemann <friemann@gnome.org> -Date: Thu May 13 15:08:46 2010 +0200 - - Constify transform lookup table - - src/eog-image.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c2647d86d7a79d276fae4c395cdf52075d96205f -Author: Thomas Thurman <tthurman@gnome.org> -Date: Wed May 12 18:41:42 2010 -0400 - - Updated Shavian transliteration - - po/en@shaw.po | 923 ++++++++++++++++++++++++++++++++++++++-------------------- - 1 file changed, 614 insertions(+), 309 deletions(-) - -commit 8680c068d6c9b4513b10cdc3c42bd8a8ea0b96dd -Author: Manoj Kumar Giri <mgiri@mgiri.csb> -Date: Wed May 12 12:15:15 2010 +0530 - - Updated Oriya Translation - - po/or.po | 825 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 493 insertions(+), 332 deletions(-) - -commit 15d23daf9b43d9cb632033518ec88458b26d61e8 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun May 9 22:16:12 2010 +0200 - - Make EogPluginEngine GSEAL-compatible - - Has a workaround for the different behaviour of gtk_window_get_group() - that makes sure that the configure dialog and its parent share a window - group of their own as before. Not sure if it's needed. - Part of bug 606883. - - src/eog-plugin-engine.c | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - -commit d53d169824923c4851f8b2abac520be10846415e -Author: Felix Riemann <friemann@gnome.org> -Date: Sun May 9 21:19:25 2010 +0200 - - Make EogThumbNav GSEAL-compatible - - Part of bug 606883. - - src/eog-thumb-nav.c | 36 +++++++++++++++++++----------------- - 1 file changed, 19 insertions(+), 17 deletions(-) - -commit fd8fac07cfc426d4b419155874e2417c118de92f -Author: Felix Riemann <friemann@gnome.org> -Date: Sun May 9 14:37:00 2010 +0200 - - When generating the settings directory also create it's parents - - Fixes warnings and unsaved toolbars when ~/.gnome2 does not exists yet. - Also set the directory permissions less permissive by default. - See: http://mail.gnome.org/archives/eog-list/2010-May/msg00003.html - - src/eog-util.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 6a7a94e6ded816050e1eb002a77f047a955891f0 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon May 3 22:22:55 2010 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 30e3348dc261a96d35347b6c8983cfdba49e1324 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon May 3 22:18:40 2010 +0200 - - Prepare for 2.31.1 - - NEWS | 45 +++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 45 insertions(+) - -commit 3f5ee79db7689bfa2a2ad4d813efdeb8e8d95dc3 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon May 3 00:26:13 2010 +0200 - - Generate separator pixbuf using an offscreen window - - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 75 +++-------------------- - 1 file changed, 7 insertions(+), 68 deletions(-) - -commit f10411901ad9b8d3a87f7e8ef4312d016a76407d -Author: Andre Klapper <a9016009@gmx.de> -Date: Wed Apr 14 17:24:49 2010 +0200 - - Make libegg code and EogWindow GSEAL-compatible. See bug 606883. - - configure.ac | 2 +- - cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 50 ++++++++++++----------- - cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 8 ++-- - src/eog-window.c | 24 +++++++++++ - 4 files changed, 55 insertions(+), 29 deletions(-) - -commit db5f8cf7eaf39337a9d0a03069e4e7d852125908 -Author: Fran Diéguez <fran.dieguez@mabishu.com> -Date: Sat May 1 21:35:44 2010 +0200 - - Updated Galician translation - - po/gl.po | 201 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 102 insertions(+), 99 deletions(-) - -commit 41e9d8bf5adbfdb0b8bf72b1b96394e4c1d358ce -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Sat May 1 19:25:07 2010 +0200 - - Updated Norwegian bokmål translation - - po/nb.po | 292 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 144 insertions(+), 148 deletions(-) - -commit 15123149313ccfcc423d45238308d155ec1a31c7 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Thu Apr 29 17:39:30 2010 +0200 - - Updated Spanish translation - - po/es.po | 201 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 102 insertions(+), 99 deletions(-) - -commit e633cf790c20e4d6ae692c307b9106cdb98746c8 -Author: Ivar Smolin <okul@linux.ee> -Date: Thu Apr 29 17:28:47 2010 +0300 - - Estonian translation updated - - po/et.po | 40 +++++++++++++++++++++++----------------- - 1 file changed, 23 insertions(+), 17 deletions(-) - -commit 92207fdf7a2148e13e890b8ab1aa32e02a6436b8 -Author: Gabriel Corvalan Cornejo <just.the.boss@gmail.com> -Date: Wed Apr 28 22:34:56 2010 +0200 - - Make strings during image opening consistent with menu item - - The menu item talks about opening an image. So should the file open - dialog and the status while the image is opened. (bug 614497) - - src/eog-file-chooser.c | 2 +- - src/eog-window.c | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit f55ae89b086d864e0c47af1432fda6d6c8ca42dc -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Apr 28 20:25:24 2010 +0200 - - Reorder menu items to make menus more intuitive and less confusing - - Based on a proposal by Hylke Bons. Most visible change is the 'File' - menu now being more specifically called as 'Image' now as that's what - we're talking about in this case. - Also the action names were adjusted to be in line with the others. - This causes custom toolbars to loose these items on the first start. - (bug 614457) - - data/eog-toolbar.xml | 8 +++---- - data/eog-ui.xml | 57 +++++++++++++++++++++++++------------------------- - src/eog-window.c | 59 ++++++++++++++++++++++++++-------------------------- - 3 files changed, 61 insertions(+), 63 deletions(-) - -commit 6c3ee0d11b05e8bd40038834999f492ffb22e682 -Author: Carles Ferrando <carles.ferrando@gmail.com> -Date: Thu Apr 22 22:54:03 2010 +0200 - - Updated Catalan (Valencian) translation - - po/ca@valencia.po | 735 ++++++++++++++++++++++++++++++------------------------ - 1 file changed, 416 insertions(+), 319 deletions(-) - -commit 0d9a230e81c2b33ef0fac744601483c3c5083826 -Author: Amitakhya Phukan <aphukan@fedoraproject.org> -Date: Thu Apr 22 16:24:58 2010 +0530 - - Updating Assamese translations. - - po/as.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit cf9e24cd77513db9384c875494ea00d5657a8525 -Author: Shankar Prasad <sprasad@git.gnome.org> -Date: Thu Apr 22 12:34:46 2010 +0530 - - Updated Kannada translations - - po/kn.po | 692 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 398 insertions(+), 294 deletions(-) - -commit 871c2c2c97bc5bb3ada342c8ef27c310f4d22847 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Apr 18 15:42:57 2010 +0200 - - Add simple printing support for SVGs - - Use librsvg to draw the SVGs to the cairo context during printing. - Should improve print quality quite a bit. Fixes bug 518055. - - src/eog-print.c | 31 ++++++++++++++++++++++++------- - 1 file changed, 24 insertions(+), 7 deletions(-) - -commit 1e488a50cfd86c056bc4128a83d50e8b92b373ea -Author: Hiroyuki Ikezoe <poincare@ikezoe.net> -Date: Sat Apr 10 17:00:48 2010 +0900 - - Use rsvg_handle_set_base_uri to resolve relative path. - - (bug 615344) - - src/eog-image.c | 4 ++++ - 1 file changed, 4 insertions(+) - -commit 21caf5f03041e236157e967bf2c07832b5ba551b -Author: Hiroyuki Ikezoe <hiikezoe@gnome.org> -Date: Sun Apr 18 14:12:17 2010 +0200 - - Render SVGs using librsvg when filtering is enabled - - Redraws scaled SVGs correctly instead of just showing a scaled and - filtered pixbuf. Note that depending on the filters used by the image - rendering can be quite slow at large zoom factors. Fixes bug 108435. - - configure.ac | 18 ++++ - src/eog-image-private.h | 6 ++ - src/eog-image.c | 68 ++++++++++++++- - src/eog-image.h | 10 +++ - src/eog-scroll-view.c | 226 +++++++++++++++++++++++++++++++++++++++++++----- - src/eog-transform.c | 11 +++ - src/eog-transform.h | 2 + - src/main.c | 6 ++ - 8 files changed, 320 insertions(+), 27 deletions(-) - -commit e89ebc3220f2cab15c998af8891d93c2499afe72 -Author: Francisco Diéguez <fran.dieguez@mabishu.com> -Date: Sat Apr 17 22:12:54 2010 +0200 - - Updated Galician translations - - po/gl.po | 258 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 130 insertions(+), 128 deletions(-) - -commit d0b25ee106aefd325445ebd755c2ef95ecddeb40 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sat Apr 17 19:00:52 2010 +0200 - - Updated Spanish translation - - po/es.po | 255 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 130 insertions(+), 125 deletions(-) - -commit a662d6822112fd173b7ce9a803e7e4a593a26b18 -Author: Hylke Bons <hylkebons@gmail.com> -Date: Sat Apr 17 17:58:12 2010 +0200 - - Merge smaller SVG variants of eog's logo into a single one-canvas SVG - - (bug 615356) - - data/icons/16x16/Makefile.am | 1 - - data/icons/16x16/apps/eog.svg | 339 --------- - data/icons/22x22/Makefile.am | 1 - - data/icons/22x22/apps/eog.svg | 530 -------------- - data/icons/32x32/Makefile.am | 1 - - data/icons/32x32/apps/eog.svg | 537 --------------- - data/icons/scalable/Makefile.am | 5 + - data/icons/scalable/apps/eog-onecanvas.svg | 1025 ++++++++++++++++++++++++++++ - 8 files changed, 1030 insertions(+), 1409 deletions(-) - -commit 62ff42f013a17135e12b4f02480bdbaa80cf288b -Author: Hylke Bons <hylkebons@gmail.com> -Date: Sat Apr 17 16:15:41 2010 +0200 - - Add 256x256 high resolution app icon - - This is going to be used by gnome-shell's ALT+TAB switcher for example. - (bug 615356) - - configure.ac | 1 + - data/icons/256x256/Makefile.am | 7 +++++++ - data/icons/256x256/apps/eog.png | Bin 0 -> 47467 bytes - data/icons/Makefile.am | 2 +- - 4 files changed, 9 insertions(+), 1 deletion(-) - -commit e39dae81cbe687bfd10c4c854e4defd871841486 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Apr 17 16:08:29 2010 +0200 - - Add --version command line parameter - - (bug 615531) - - src/main.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - -commit 07e1128a516ceea68add62808a7cc4bb9a5d325d -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Apr 14 21:20:57 2010 +0200 - - Make silent build more silent - - eggtypebuiltins were still built verbosely - - cut-n-paste/toolbar-editor/Makefile.am | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit d8ab8cb6e4ba80962003b75f2aaa50d17d4ad48a -Author: Hylke Bons <hylkebons@gmail.com> -Date: Wed Apr 14 20:48:44 2010 +0200 - - Force-show icons for recent file list in File menu - - (bug 614405) - - src/eog-window.c | 1 + - 1 file changed, 1 insertion(+) - -commit cffc41e7b0f255cdaf82052dad83ff1539599fdb -Author: Marek Kasik <mkasik@redhat.com> -Date: Fri Apr 2 15:00:26 2010 +0200 - - Embed page setup in the print dialog - - This patch activates paper size combo and orientation combo in the - Page Setup tab in the print dialog. It removes "Page Setup..." from - the file menu. It also actualize paper size in Image Settings each - time it changes. (bug 614451) - - data/eog-ui.xml | 1 - - src/eog-print-image-setup.c | 31 +++++++++++++++++++++++++++++++ - src/eog-print-image-setup.h | 5 +++++ - src/eog-print.c | 7 ++++++- - src/eog-window.c | 44 +------------------------------------------- - 5 files changed, 43 insertions(+), 45 deletions(-) - -commit 30986c8d4c95ec804c6e93251fa69c3ff371bbe6 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Apr 14 20:43:18 2010 +0200 - - Post-branch version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 55583e9f2cdbe39dbfeb1c09c6c4d2a852342552 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Apr 14 20:25:36 2010 +0200 - - Fix msgfmt errors that prevent branching - - Mark strings fuzzy that prevent creating a new branch. - The affected strings are not used anyway, so there's no impact to users. - - po/ug.po | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit 1f519331070f4fc7f2f3f01a54880db18defa8c0 -Author: Yannig Marchegay <yannig@marchegay.org> -Date: Wed Apr 14 13:54:13 2010 +0200 - - Occitan translation update - - po/oc.po | 1 + - 1 file changed, 1 insertion(+) - -commit 7f06d2bd3e0d895fd8b3f8cc4241830a5c31777b -Author: Yannig Marchegay <yannig@marchegay.org> -Date: Wed Apr 14 13:53:27 2010 +0200 - - Occitan translation update - - po/oc.po | 3 +++ - 1 file changed, 3 insertions(+) - -commit 88bace02ff11500600088264e6df7703a1ed9d39 -Author: Yannig Marchegay <yannig@marchegay.org> -Date: Wed Apr 14 13:51:59 2010 +0200 - - Occitan translation update - - po/oc.po | 1000 ++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 619 insertions(+), 381 deletions(-) - -commit 3e60de77b38ad35fed4336666af3b12e6532d1ca -Author: Ani Peter <apeter@redhat.com> -Date: Wed Apr 14 14:57:56 2010 +0530 - - Updated Malayalam Translation - - po/ml.po | 687 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 410 insertions(+), 277 deletions(-) - -commit 6ba8f5bc495dd2da1edac7447149c20018df10f8 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Apr 13 23:57:44 2010 +0200 - - Fix typo preventing build with libjpeg-6 - - jpegutils/transupp.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit f9ee2fc69f19b864af3e3eadfed005a7d31c52a9 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Apr 13 23:16:29 2010 +0200 - - Update to latest git.mk from Pango - - git.mk | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - -commit a9fda91a1482ba9efb99e439ead89fe0972f032e -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Apr 13 23:06:39 2010 +0200 - - Ship header forgotten in last commit - - Forgot to add this header with commit 620ee28f. - - jpegutils/jpegint-8a.h | 407 +++++++++++++++++++++++++++++++++++++++++++++++++ - jpegutils/jpegint.h | 7 + - 2 files changed, 414 insertions(+) - -commit 620ee28f8896e7a195c0a6169abd251d9e82da25 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Apr 13 22:55:06 2010 +0200 - - Fix lossless JPEG rotation when using libjpeg-8 - - This is mostly a port of the corresponding patch for gThumb by - Paolo Bacchilega (bug 612809). Since it's needed by the newer transupp - we also ship the internal jpegint.h header as done by digiKam to - workaround distros that do not ship it by default. Fixes bug 615387. - - configure.ac | 17 + - jpegutils/Makefile.am | 15 +- - jpegutils/{README => README.6b} | 0 - jpegutils/README.8a | 325 +++++++ - jpegutils/{transupp.c => transupp-6b.c} | 2 +- - jpegutils/{transupp.h => transupp-6b.h} | 0 - jpegutils/transupp-8a.c | 1609 +++++++++++++++++++++++++++++++ - jpegutils/transupp-8a.h | 215 +++++ - jpegutils/transupp.h | 162 +--- - src/eog-image-jpeg.c | 5 +- - 10 files changed, 2189 insertions(+), 161 deletions(-) - -commit 9c1de12ccb106a54d8555281155a800725244d1c -Author: Runa Bhattacharjee <runab@redhat.com> -Date: Tue Apr 13 12:27:06 2010 +0530 - - Typos corrected - - po/bn_IN.po | 42 +++++++----------------------------------- - 1 file changed, 7 insertions(+), 35 deletions(-) - -commit 9b2d8c5d186e2c7b1379b11c92ce2245b1669867 -Author: Runa Bhattacharjee <runab@redhat.com> -Date: Tue Apr 13 12:05:39 2010 +0530 - - Typos corrected - - po/bn_IN.po | 702 ++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 424 insertions(+), 278 deletions(-) - -commit 9cd3607bb481ed0e16c6f9dd2a89fb2f1b53dfc7 -Author: Sandeep Shedmake <sshedmak@redhat.com> -Date: Tue Apr 13 09:49:49 2010 +0530 - - Updated Marathi Translations - - po/mr.po | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 9698c9de5c7b9a6219d0a97da38b9972400c8700 -Author: Žygimantas Beručka <zygis@gnome.org> -Date: Sat Apr 10 21:55:21 2010 +0300 - - Updated Lithuanian translation - - po/lt.po | 96 +++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 46 insertions(+), 50 deletions(-) - -commit 5777a486416cd63fb4dc78ea0d2d8426c97c24a5 -Author: Theppitak Karoonboonyanan <thep@linux.thai.net> -Date: Tue Apr 6 14:16:39 2010 +0700 - - Updated Thai translation. - - po/th.po | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -commit 16ebac9877c836a44d5145d2e1b7fca455409e6d -Author: Anita Reitere <nitalynx@gmail.com> -Date: Mon Apr 5 18:11:37 2010 +0300 - - Updated Latvian translation. - - po/lv.po | 773 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 466 insertions(+), 307 deletions(-) - -commit 77aa9d1900538d8eee3a62d736cb0433316877f3 -Author: Jordi Serratosa <jordis.lists@gmail.com> -Date: Thu Apr 1 21:45:45 2010 +0200 - - Fixes to Catalan translation - - po/ca.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 021b9aa48630eae14e10eb8a10d9ad3f155bc645 -Author: krishnababu k <kkrothap@redhat.ocm> -Date: Thu Apr 1 19:05:18 2010 +0530 - - Updated Telugu Translations - - po/te.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 2c75691b3c0a50049bbe66ddae34711eedefb45e -Author: Sandeep Shedmake <sshedmak@redhat.com> -Date: Thu Apr 1 18:20:59 2010 +0530 - - Updated Marathi Translations - - po/mr.po | 295 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 163 insertions(+), 132 deletions(-) - -commit 8190fd06910e70506ff8a7287c43267f3ac9a415 -Author: krishnababu k <kkrothap@redhat.ocm> -Date: Thu Apr 1 18:04:11 2010 +0530 - - Updated Telugu Translations - - po/te.po | 680 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 409 insertions(+), 271 deletions(-) - -commit 98672a01280338078ac5a06a9b66663c99470bef -Author: Wouter Bolsterlee <wbolster@gnome.org> -Date: Wed Mar 31 19:49:12 2010 +0200 - - Dutch translation updated by Wouter Bolsterlee - - po/nl.po | 1109 +++++++++++++++++++++++++------------------------------------- - 1 file changed, 444 insertions(+), 665 deletions(-) - -commit 62c8626fd1da1a652e2e4f802d1cfe000d732610 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Mar 29 23:52:53 2010 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 15a2915dad0f88cf4097d062bd0dfd32153c1652 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Mar 29 23:51:21 2010 +0200 - - Update for 2.30.0 - - NEWS | 31 +++++++++++++++++++++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 33 insertions(+), 2 deletions(-) - -commit 8d0ac7f2d3573121ff81a702904b6b6e1521b07d -Author: Jamil Ahmed <itsjamil@gmail.com> -Date: Sun Mar 28 15:38:20 2010 +0600 - - Updated Bengali translation - - po/bn.po | 107 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 53 insertions(+), 54 deletions(-) - -commit 41de56165b6af3c4cde53dd8ddc3bbe0ae6af95e -Author: Kenneth Nielsen <k.nielsen81@gmail.com> -Date: Sun Mar 28 10:52:01 2010 +0200 - - Updated Danish translation - - po/da.po | 20 ++++++++++---------- - 1 file changed, 10 insertions(+), 10 deletions(-) - -commit 0811afe631135a9eb40a7889bf053b51c0bcd261 -Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> -Date: Sat Mar 27 16:01:43 2010 +0100 - - Updated Basque language - - po/eu.po | 11 ++++++++--- - 1 file changed, 8 insertions(+), 3 deletions(-) - -commit bba51ad1dda283a90d8bbc47cb01c8d389670efc -Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> -Date: Sat Mar 27 15:38:41 2010 +0100 - - Updated Basque language - - po/eu.po | 23 +++++++++-------------- - 1 file changed, 9 insertions(+), 14 deletions(-) - -commit 0927cc788169cf8a753f279d7dc2e0a6fd164a18 -Author: Jamil Ahmed <itsjamil@gmail.com> -Date: Sat Mar 27 19:45:31 2010 +0600 - - Updated Bengali translation - - po/bn.po | 565 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 297 insertions(+), 268 deletions(-) - -commit c1bbba508a128b2e9b06f6f7467813c54f3f062d -Author: Maxim V. Dziumanenko <dziumanenko@gmail.com> -Date: Fri Mar 26 13:35:23 2010 +0200 - - Updated Ukrainian translation - - po/uk.po | 300 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 140 insertions(+), 160 deletions(-) - -commit 065056f7bf922cef925337721531840b36c3196d -Author: Sweta Kothari <swkothar@redhat.com> -Date: Wed Mar 24 17:32:40 2010 +0530 - - Updated Gujarati Translations - - po/gu.po | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit b7705afb0d677db872d17df87ac2101099528111 -Author: Sweta Kothari <swkothar@redhat.com> -Date: Wed Mar 24 17:20:44 2010 +0530 - - Updated Gujarati Translations - - po/gu.po | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - -commit 6cbfd5bcb6ea7f104c51c8f0b945aefb8722fd6e -Author: Gintautas Miliauskas <gintautas@miliauskas.lt> -Date: Tue Mar 23 20:32:46 2010 +0200 - - Updated Lithuanian translation. - - po/lt.po | 613 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 357 insertions(+), 256 deletions(-) - -commit a368826009d3dc4ab347499c02261e7228065ee7 -Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> -Date: Mon Mar 22 17:38:01 2010 +0100 - - Updated Basque language - - po/eu.po | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 8b86f7e805a20d59d82e2bc5217fcd330644b062 -Author: Mattias Põldaru <mahfiaz gmail com> -Date: Mon Mar 22 15:57:26 2010 +0200 - - Estonian translation updated - - po/et.po | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -commit 639326a268634b35d05bf692f8e021daa3524ae0 -Author: Gianvito Cavasoli <gianvito@gmx.it> -Date: Fri Mar 19 23:46:59 2010 +0100 - - Updated Italian translation - - po/it.po | 611 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 329 insertions(+), 282 deletions(-) - -commit c35c7592fab25c687fada80c97180dc424bdce0a -Author: Duarte Loreto <happyguy_pt@hotmail.com> -Date: Thu Mar 18 00:27:35 2010 +0000 - - Updated Portuguese translation - - po/pt.po | 665 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 376 insertions(+), 289 deletions(-) - -commit 76157831fc26b4c0d1c4abc9acdc91fcf029a9aa -Author: A S Alam <aalam@users.sf.net> -Date: Mon Mar 15 07:25:01 2010 +0530 - - updating for Punjabi by A S Alam - - po/pa.po | 642 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 386 insertions(+), 256 deletions(-) - -commit 26159767eb5c3a58bbde1844884931bcf8da220b -Author: Kenneth Nielsen <k.nielsen81@gmail.com> -Date: Mon Mar 15 00:10:57 2010 +0100 - - Updated Danish translation - - po/da.po | 623 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 358 insertions(+), 265 deletions(-) - -commit 625824fc09130ffa06cf245329a00c5fb3e0174e -Author: Changwoo Ryu <cwryu@debian.org> -Date: Sun Mar 14 03:32:06 2010 +0900 - - Updated Korean translation - - po/ko.po | 642 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 372 insertions(+), 270 deletions(-) - -commit 6c3c76d6c3a0f097ea0f4fa005d97e98e70a8524 -Author: Daniel Nylander <po@danielnylander.se> -Date: Sat Mar 13 12:30:17 2010 +0100 - - Updated Swedish translation - - po/sv.po | 288 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 150 insertions(+), 138 deletions(-) - -commit daaa858441dbd8295b88713c3ebc8db64056ff8f -Author: Gil Forcada <gforcada@gnome.org> -Date: Wed Mar 10 15:07:46 2010 +0100 - - Updated Catalan translation - - po/ca.po | 651 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 359 insertions(+), 292 deletions(-) - -commit 37f2b2524e586dc4444c28b46861cb70c3be0abd -Author: Tommi Vainikainen <thv@iki.fi> -Date: Wed Mar 10 15:45:58 2010 +0200 - - Updated Finnish translation - - po/fi.po | 698 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 387 insertions(+), 311 deletions(-) - -commit d025360cfe9592459b675f2922a90d50c4ead66e -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Mar 7 20:51:47 2010 +0100 - - Mark EogCloseConfirmationDialog's functions as internal - - src/eog-close-confirmation-dialog.h | 7 +++++++ - 1 file changed, 7 insertions(+) - -commit cef2bbf0efc316b75ce7f4d06f860d07ff087c7f -Author: Miloš Popović <mpopovic@src.gnome.org> -Date: Sun Mar 7 17:12:32 2010 +0100 - - Updated Serbian translations - - po/sr.po | 707 ++++++++++++++++++++++++++++++++++----------------------- - po/sr@latin.po | 707 ++++++++++++++++++++++++++++++++++----------------------- - 2 files changed, 856 insertions(+), 558 deletions(-) - -commit 0f95dbe9387eecdda26379c2bc21f03d9801c5e4 -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Sat Mar 6 21:46:41 2010 +0100 - - Updated Hungarian translation - - po/hu.po | 594 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 323 insertions(+), 271 deletions(-) - -commit ec9a39d0ff355dd57a727688cde2bc37e240b6e1 -Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> -Date: Sat Mar 6 11:14:14 2010 +0100 - - Updated Basque language - - po/eu.po | 26 ++++++++++++++++---------- - 1 file changed, 16 insertions(+), 10 deletions(-) - -commit 2d7ca03c6cfe212a44e5b2576ee7c9baa6167dcb -Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> -Date: Fri Mar 5 09:08:16 2010 +0100 - - Updated Basque language - - po/eu.po | 598 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 334 insertions(+), 264 deletions(-) - -commit 314329487bdc2c39f0b791508250a97c4f8ee8de -Author: Claude Paroz <claude@2xlibre.net> -Date: Sun Feb 28 22:42:40 2010 +0100 - - Updated French translation - - po/fr.po | 270 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 144 insertions(+), 126 deletions(-) - -commit 0088c6e56a3fdf14f4578dad9720261245cdf16c -Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> -Date: Sun Feb 28 21:59:51 2010 +0900 - - Updated Japanese translation. - Original update by Hideki Yamane (Debian-JP). - http://l10n.gnome.org/vertimus/eog/master/po/ja - Merged bug report by SUGITA Toshinori. - https://bugzilla.gnome.org/show_bug.cgi?id=611279 - - po/ja.po | 771 +++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 473 insertions(+), 298 deletions(-) - -commit 2e3c931c31993cb51ee35b67cfebd0bf12d127e2 -Author: Piotr Drąg <piotrdrag@gmail.com> -Date: Sat Feb 27 14:43:14 2010 +0100 - - Updated Polish translation - - po/pl.po | 634 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 352 insertions(+), 282 deletions(-) - -commit 08b05b059971697e527544637878e3eed03f0804 -Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> -Date: Sat Feb 27 20:23:04 2010 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 13 ++++++------- - po/zh_TW.po | 13 ++++++------- - 2 files changed, 12 insertions(+), 14 deletions(-) - -commit f80cb854f215a2cc59782337fc6bea35b1a384b8 -Author: Liel Fridman <lielft@gmail.com> -Date: Sat Feb 27 00:09:19 2010 +0200 - - Updated Hebrew translation - - po/he.po | 582 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 306 insertions(+), 276 deletions(-) - -commit 965770938bf0681ba4f89a4800756731c43fcdd8 -Author: Thanos Lefteris <alefteris@gmail.com> -Date: Thu Feb 25 00:40:52 2010 +0200 - - Updated Greek translation - - po/el.po | 712 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 425 insertions(+), 287 deletions(-) - -commit 4cbf235122ebed0ba4247a8e8aeec7341efaf859 -Author: Bruce Cowan <bcowan@fastmail.co.uk> -Date: Wed Feb 24 14:05:30 2010 +0000 - - Updated British English translation - - po/en_GB.po | 550 ++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 293 insertions(+), 257 deletions(-) - -commit d4b79c16b4c31a8aab1d52f189a6127b2ee642a4 -Author: Alexander Shopov <ash@contact.bg> -Date: Tue Feb 23 08:59:56 2010 +0200 - - Updated Bulgarian translation - - po/bg.po | 242 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 131 insertions(+), 111 deletions(-) - -commit 84fe63eaffc954d996fba99a6ad4c2a17254d668 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Feb 22 23:36:26 2010 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit ba50484d88a1b791aa1d49507742b2de01483db9 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Feb 22 23:28:02 2010 +0100 - - Prepare for release 2.29.91 - - NEWS | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - -commit b50cd2f99d948bc94fed9d58a21b3a3d25fe1612 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Feb 12 17:41:33 2010 +0100 - - Explicitly link to libX11 - - Explicitly links eog to libX11 if necessary. Should fix linker errors - using non-recursive linkers. Includes fallback for X11 distributions - without pkg-config support. Fixes bug #609184. - - configure.ac | 24 ++++++++++++++++++++++++ - cut-n-paste/totem-screensaver/Makefile.am | 3 +++ - src/Makefile.am | 9 ++++++++- - 3 files changed, 35 insertions(+), 1 deletion(-) - -commit ef29f7cd409e8f0708196c7eef7beff7b6df9dbd -Author: Maciej Piechotka <uzytkownik2@gmail.com> -Date: Mon Feb 22 23:03:26 2010 +0100 - - Fix missing stdlib.h includes - - Fixes build failures and warnings with more strict compiler settings. - See bug#610692. - - src/eog-scroll-view.c | 1 + - src/eog-thumb-view.c | 1 + - 2 files changed, 2 insertions(+) - -commit a331097b8ea87868b6c5c4ad0f7ec064d7dc5035 -Author: Amitakhya Phukan <aphukan@fedoraproject.org> -Date: Mon Feb 22 17:17:24 2010 +0530 - - Updated Assamese translations - - po/as.po | 709 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 368 insertions(+), 341 deletions(-) - -commit 1322905ee44d07312bbd994bb5e344acdb353b13 -Author: Leonid Kanter <leon@asplinux.ru> -Date: Sun Feb 21 17:54:18 2010 +0200 - - Updated Russian translation from Alexander Saprykin - - po/ru.po | 637 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 356 insertions(+), 281 deletions(-) - -commit 3599e0635c415bcff33514e4cf77069eba6bddcc -Author: vasudeven <agnihot3@gmail.com> -Date: Thu Feb 18 08:39:16 2010 +0530 - - updated Tamil translation - - po/ta.po | 329 ++++++++++++++++++++++++++++----------------------------------- - 1 file changed, 144 insertions(+), 185 deletions(-) - -commit 6890308e08c580625f56d6742f9c6dd9478637ef -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Feb 15 22:19:01 2010 +0100 - - Fix typos in API comments - - Spotted by gtk-doc-1.13. - - src/eog-application.c | 4 ++-- - src/eog-print-image-setup.c | 2 +- - src/eog-thumb-view.c | 2 +- - 3 files changed, 4 insertions(+), 4 deletions(-) - -commit 5116d814b7d42d33c88cd211f3e0f308d5bec72f -Author: Vladimir Melo <vmelo@gnome.org> -Date: Sun Feb 14 11:02:51 2010 -0200 - - Updated Brazilian Portuguese translation - - po/pt_BR.po | 213 +++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 116 insertions(+), 97 deletions(-) - -commit 814b952a14400db8c6bead95ae3b9e937efc1b89 -Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> -Date: Sat Feb 13 00:08:50 2010 +0200 - - Update Romanian translation - - po/ro.po | 658 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 379 insertions(+), 279 deletions(-) - -commit cc5d36604d5a90b03a7328f6484c4b7d8de9cf54 -Author: Fran Diéguez <frandieguez@ubuntu.com> -Date: Fri Feb 12 10:38:35 2010 +0100 - - Updated Galician Translation - - po/gl.po | 667 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 370 insertions(+), 297 deletions(-) - -commit 64156898d4ee346b6ea0c73f66d266f7cb732461 -Author: Petr Kovar <pknbe@volny.cz> -Date: Thu Feb 11 22:04:16 2010 +0100 - - Update Czech translation by Adrian Gunis - - po/cs.po | 585 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 326 insertions(+), 259 deletions(-) - -commit d4782d40fd43e7ffc3c57588767ad62fbc798ac5 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Thu Feb 11 15:00:39 2010 +0100 - - Updated Slovenian translation - - po/sl.po | 272 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 146 insertions(+), 126 deletions(-) - -commit eab8f052b248faa98b46629d1200d51091badd89 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Wed Feb 10 21:55:31 2010 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 243 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 133 insertions(+), 110 deletions(-) - -commit 01cfc78d6139ffe49ddc6152294139a93c07b271 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Wed Feb 10 07:55:39 2010 +0100 - - Updated Spanish translation - - po/es.po | 32 +++++++++++++++----------------- - 1 file changed, 15 insertions(+), 17 deletions(-) - -commit 2ef52cd26f3fa035150b037161fb6f6666f6e44a -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Wed Feb 10 00:38:35 2010 +0200 - - Updated Arabic translation - - po/ar.po | 249 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 134 insertions(+), 115 deletions(-) - -commit 0b8a7aca612af015fa627a5d1f01b80b2e69623e -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Feb 9 20:34:44 2010 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 260a5440f50173dbad61a3117a8d4f1c77f8c273 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Feb 9 20:27:11 2010 +0100 - - Prepare for release 2.29.90 - - We missed 2.29.6 (Oops!), so version number had to be adjusted. - - NEWS | 32 ++++++++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 33 insertions(+), 1 deletion(-) - -commit 6cebe233786101783ae3e649bc3241e9c490ef22 -Author: Daniel Macks <dmacks@netspace.org> -Date: Mon Feb 8 12:31:07 2010 +0100 - - Explicitly link to GThread - - Should fix linker errors related to GThread on systems that don't - recursively resolve linked libraries like OS X. See bug #609184. - - configure.ac | 1 + - 1 file changed, 1 insertion(+) - -commit 2afc8080568c8778e33c0b42475d5a6864662a83 -Author: Theppitak Karoonboonyanan <thep@linux.thai.net> -Date: Mon Feb 8 14:07:03 2010 +0700 - - Updated Thai translation. - - po/th.po | 638 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 362 insertions(+), 276 deletions(-) - -commit 7b338b986c612593002a87186f3957202769b54a -Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> -Date: Sun Feb 7 19:57:02 2010 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - - po/zh_HK.po | 628 ++++++++++++++++++++++++++++++++---------------------------- - po/zh_TW.po | 628 ++++++++++++++++++++++++++++++++---------------------------- - 2 files changed, 680 insertions(+), 576 deletions(-) - -commit ab7c60cf183dbe5955eb8f966294cf32a9adda19 -Author: Ivar Smolin <okul@linux.ee> -Date: Sun Feb 7 12:13:30 2010 +0200 - - Updating Estonian translation - - po/et.po | 20 ++++++++++++++++++-- - 1 file changed, 18 insertions(+), 2 deletions(-) - -commit 8470c2f8232be89a76141047a20a41833d4c8068 -Author: Lucas Rocha <lucasr@gnome.org> -Date: Sat Feb 6 13:01:46 2010 +0000 - - [window] Update about dialog with new maintainers - - src/eog-window.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 0c7fa22735fc0137d416e39eece9676e2dde38db -Author: Lucas Rocha <lucasr@gnome.org> -Date: Sat Feb 6 12:51:18 2010 +0000 - - MAINTAINERS: maintainers are now Claudio and Felix - - Thanks for all the good work guys! - - MAINTAINERS | 10 +++++++--- - 1 file changed, 7 insertions(+), 3 deletions(-) - -commit 444e57447fd1c7e5d738950743f547cb41c65a90 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Fri Feb 5 20:18:55 2010 +0100 - - Updated Spanish translation - - po/es.po | 321 ++++++++++++++++++++++++++++----------------------------------- - 1 file changed, 141 insertions(+), 180 deletions(-) - -commit 19e1f0dde875863c819ecd8eec3d7c46e559a6d7 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Feb 5 18:39:27 2010 +0100 - - Updated German translation - - po/de.po | 241 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 132 insertions(+), 109 deletions(-) - -commit f2de185ed25c03d2bf1f60d7311448b26f7ee027 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Feb 5 16:06:11 2010 +0100 - - Cleanup random image patch - - This adds a mnemonic to the random image menu entry and actually makes - it visible in the application. It also removes the short label of the - action as it can't be used in the toolbar for now anyway since we don't - have a fitting icon. - - data/eog-ui.xml | 2 ++ - src/eog-window.c | 7 ++----- - 2 files changed, 4 insertions(+), 5 deletions(-) - -commit 9221716bc34aa8cf78293b89160920260018fe48 -Author: Quinten Lansu <knight666@gmail.com> -Date: Fri Feb 5 15:54:05 2010 +0100 - - Make it possible to select a random image from the collection - - This allows the user to crawl randomly through his collection. - Patch posted to eog-list: - http://mail.gnome.org/archives/eog-list/2009-December/msg00003.html - - src/eog-thumb-view.c | 9 +++++++++ - src/eog-thumb-view.h | 3 ++- - src/eog-window.c | 21 +++++++++++++++++++++ - 3 files changed, 32 insertions(+), 1 deletion(-) - -commit f71a40269ae3b3ec3400e4d5352c064a6a7ffed5 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Feb 5 15:29:17 2010 +0100 - - Ask before showing Appearance capplet after setting wallpaper - - This displays an info bar asking if the user actually wants to edit the - style of his wallpaper. The info bar is hidden either by answering it or - by selecting the next image. Confirming the question still opens the - Appearance capplet as before. Fixes bug #606935. - - src/eog-window.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++----- - 1 file changed, 62 insertions(+), 6 deletions(-) - -commit 20400bfe00c20e4efb1b18eef714007b376b27f1 -Author: Felix Riemann <friemann@gnome.org> -Date: Thu Feb 4 19:19:15 2010 +0100 - - Sync screensaver code with latest upstream - - Import latest screensaver inhibitor code from Totem's trunk. - Keep our local modifications mostly alive for now. - - cut-n-paste/totem-screensaver/totem-scrsaver.c | 91 ++++++++++++++++++-------- - cut-n-paste/totem-screensaver/totem-scrsaver.h | 6 +- - 2 files changed, 67 insertions(+), 30 deletions(-) - -commit 1ec9b08149e7dce8fed82c67542fda2446809a29 -Author: Michel Recondo <michel@recondo.com.br> -Date: Thu Feb 4 10:33:14 2010 -0300 - - Updated Brazilian Portuguese Translation - - po/pt_BR.po | 588 +++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 319 insertions(+), 269 deletions(-) - -commit b6aa6dd2209b09850a03bde1765e059b432eb6ed -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jan 29 21:37:54 2010 +0100 - - Make EogWindow GSEAL-compatible as far as possible - - There are some GTK_WIDGET_REALIZED calls left for which there's no - replacement yet in GTK+. - - src/eog-window.c | 32 +++++++++++++++++++------------- - 1 file changed, 19 insertions(+), 13 deletions(-) - -commit d7a07bd0985e9540f869ebdfc6b4a950828c1df4 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jan 29 21:15:14 2010 +0100 - - Make EogPluginManager GSEAL-compatible - - src/eog-plugin-manager.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - -commit b5cacd8f5c843053b204064eba9ab6a828490b00 -Author: Alexander Shopov <ash@contact.bg> -Date: Thu Jan 28 09:06:47 2010 +0200 - - Updated Bulgarian translation - - po/bg.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 3a415fd073421c26a5e49b36d7cb6d10c54bdfbf -Author: Krasimir Chonov <mk2616@abv.bg> -Date: Thu Jan 28 09:00:52 2010 +0200 - - Updated Bulgarian translation - - po/bg.po | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -commit 5daf0a0939c9d7ce4d7f3e1ad5e2e35cbdeec458 -Author: Krasimir Chonov <mk2616@abv.bg> -Date: Thu Jan 28 09:00:52 2010 +0200 - - Updated Bulgarian translation - - po/bg.po | 538 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 287 insertions(+), 251 deletions(-) - -commit 41d7aa05eb230a9019ea252a29b1d6f526358288 -Author: Ivar Smolin <okul@linux.ee> -Date: Wed Jan 27 18:23:45 2010 +0200 - - Updating Estonian translation - - po/et.po | 238 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 126 insertions(+), 112 deletions(-) - -commit 0bd003034f58093eff92037a78fd484005110301 -Author: Jamil Ahmed <itsjamil@gmail.com> -Date: Wed Jan 27 20:05:41 2010 +0600 - - Updated Bengali translation - - po/bn.po | 876 ++++++++++++++++----------------------------------------------- - 1 file changed, 220 insertions(+), 656 deletions(-) - -commit 456b121b4f75889ec58f70a72d8b18908a76d4e8 -Author: Sweta Kothari <swkothar@redhat.com> -Date: Mon Jan 25 15:13:41 2010 +0530 - - Updated Gujarati Translations - - po/gu.po | 302 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 161 insertions(+), 141 deletions(-) - -commit 405a7483a5073c730c32678ae58b8900fce5e0e0 -Author: Aron Xu <aronxu@gnome.org> -Date: Sun Jan 24 15:33:10 2010 +0800 - - Update Simplified Chinese translation. - - po/zh_CN.po | 579 +++++++++++++++++++++++++++++------------------------------- - 1 file changed, 282 insertions(+), 297 deletions(-) - -commit a81e4600e1d64609d5afd754ad4cb27097271b64 -Author: vasudeven <agnihot3@gmail.com> -Date: Sun Jan 24 09:38:13 2010 +0530 - - updated Tamil translation - - po/ta.po | 600 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 354 insertions(+), 246 deletions(-) - -commit 04dbab668c78e251fe66f112d63ab68a9ed4694a -Author: Jamil Ahmed <itsjamil@gmail.com> -Date: Fri Jan 22 02:42:56 2010 +0600 - - Updated Bengali translation - - po/bn.po | 2379 +++++++++++++++++++++++++++++++++++++++++++++++--------------- - 1 file changed, 1798 insertions(+), 581 deletions(-) - -commit f46f50c88f6cff3b46643bd33eea3807c2c0c819 -Author: Christian.Kirbach <Christian.Kirbach@googlemail.com> -Date: Wed Jan 20 13:52:33 2010 +0100 - - Updated German translation - - po/de.po | 594 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 324 insertions(+), 270 deletions(-) - -commit 5d2fa608fc2ba92d4f12dab69d754c7d3ff969c0 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Tue Jan 19 14:15:31 2010 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 22 +++++++++------------- - 1 file changed, 9 insertions(+), 13 deletions(-) - -commit 35e354e9530e1915c0bca0653af378788c2369a7 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Jan 17 13:58:55 2010 +0100 - - Make EogCloseConfirmationDialog GSEAL-compatible - - src/eog-close-confirmation-dialog.c | 23 +++++++++++------------ - 1 file changed, 11 insertions(+), 12 deletions(-) - -commit 1fb61f05ff2a59e3bb579b8731c263c4308ca722 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Fri Jan 15 19:29:03 2010 +0100 - - Updated Slovenian translation - - po/sl.po | 624 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 316 insertions(+), 308 deletions(-) - -commit ac6f518e1870af98dc47389d695f7773debe3dda -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jan 13 22:15:14 2010 +0100 - - Make EogPrintPreview GSEAL-compatible - - src/eog-print-preview.c | 50 ++++++++++++++++++++++++------------------------- - 1 file changed, 24 insertions(+), 26 deletions(-) - -commit f0837c4a76e5c95a140776e4421b3e094c306024 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Jan 13 19:53:48 2010 +0100 - - Make EogSidebar GSEAL-compatible - - src/eog-sidebar.c | 13 ++++++++----- - 1 file changed, 8 insertions(+), 5 deletions(-) - -commit 327f1b3c20e46bce6dfdb2a4b7f6a8daf7191593 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Wed Jan 13 19:10:14 2010 +0100 - - Updated Norwegian bokmål translation - - po/nb.po | 46 +++++++++++++++++----------------------------- - 1 file changed, 17 insertions(+), 29 deletions(-) - -commit 574cd7d56ce64f49e0904fde5cfe2e9a9795e99a -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Tue Jan 12 16:03:56 2010 +0200 - - Updated Arabic translation - - po/ar.po | 541 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 278 insertions(+), 263 deletions(-) - -commit 59a9cf3289fcd5fe84091ddf841de344ded340bd -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jan 11 23:40:44 2010 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 805e461b8874006a221890847ab79d38c41d28bf -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Jan 11 23:37:25 2010 +0100 - - Prepare for release 2.29.5 - - NEWS | 30 ++++++++++++++++++++++++++++++ - configure.ac | 2 +- - 2 files changed, 31 insertions(+), 1 deletion(-) - -commit 15cc51ef3ab524025611e7e4dcfee78450efad6d -Author: Maxim V. Dziumanenko <dziumanenko@gmail.com> -Date: Sun Jan 10 16:09:02 2010 +0200 - - Update Ukrainian translation - - help/uk/uk.po | 214 ++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 109 insertions(+), 105 deletions(-) - -commit e9ab49afe4efe94e54b8302136f92226fa4db6c1 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jan 9 23:49:58 2010 +0100 - - Improve compatibility with GSEALed GtkWidget - - First steps to GSEAL-compatibility of eog's "core". - Handles some GtkWidget-related seals. - - src/eog-error-message-area.c | 4 ++-- - src/eog-plugin-manager.c | 5 ++-- - src/eog-print-preview.c | 18 ++++++++------- - src/eog-properties-dialog.c | 10 ++++---- - src/eog-scroll-view.c | 55 ++++++++++++++++++++++---------------------- - src/eog-sidebar.c | 4 ++-- - src/eog-window.c | 29 ++++++++++++----------- - 7 files changed, 65 insertions(+), 60 deletions(-) - -commit 9533661e753a77e19716ae7a791ef66739cb08ed -Author: Daniel Nylander <po@danielnylander.se> -Date: Sat Jan 9 17:58:44 2010 +0100 - - Updated Swedish translation - - po/sv.po | 606 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 326 insertions(+), 280 deletions(-) - -commit 8cc898563d13b185f60c4d2c36eedfa7aff55307 -Author: Felix Riemann <friemann@gnome.org> -Date: Sat Jan 9 00:11:53 2010 +0100 - - Fix critical warning - - We called eog_is_animation() in a location where it was possible the - passed image wasn't set. - - src/eog-scroll-view.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 238a42350bd066686aee46f72a3017862b493d2f -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jan 8 22:24:34 2010 +0100 - - Remove EogMessageArea from the API docs - - doc/reference/eog-docs.sgml.in | 1 - - doc/reference/eog-sections.txt | 24 ------------------------ - 2 files changed, 25 deletions(-) - -commit b0c6f3dfb537a8f855c268f91a788eaf5ce7bdba -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jan 8 22:21:23 2010 +0100 - - Remove now unneeded EogMessageArea widget - - bindings/python/eog.defs | 112 -------- - bindings/python/eog.override | 1 - - src/Makefile.am | 2 - - src/eog-error-message-area.c | 1 - - src/eog-message-area.c | 636 ------------------------------------------- - src/eog-message-area.h | 99 ------- - src/eog-window.c | 3 +- - 7 files changed, 1 insertion(+), 853 deletions(-) - -commit cdcf54b123c3f2ac9274dfe9cd0559909b42b320 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Jan 8 22:06:56 2010 +0100 - - Use GtkInfoBar instead of our custom message area widget - - GTK+ ships with the GtkInfoBar message area widget since version 2.18. - Use that instead of our own copy of gedit's widget which was also the - base for GtkInfoBar. - - src/eog-error-message-area.c | 24 +++++++++++++----------- - src/eog-window.c | 4 ++-- - 2 files changed, 15 insertions(+), 13 deletions(-) - -commit 8024648adaa4cf059e023909731e82838385abba -Author: Claude Paroz <claude@2xlibre.net> -Date: Thu Jan 7 22:35:24 2010 +0100 - - Updated French translation - - Contributed by Laurent Coudeur and Claude Paroz - - po/fr.po | 553 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 290 insertions(+), 263 deletions(-) - -commit be03516a57f0456636223e1b42af0969e0913a19 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Wed Jan 6 16:00:32 2010 +0100 - - Updated Spanish translation - - po/es.po | 585 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 328 insertions(+), 257 deletions(-) - -commit b9f70011788a7394df8b5503357bd65377119912 -Author: Maxim V. Dziumanenko <dziumanenko@gmail.com> -Date: Tue Jan 5 18:15:34 2010 +0200 - - Update Ukrainian translation - - po/uk.po | 601 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 339 insertions(+), 262 deletions(-) - -commit a15dd42053d5ef43495da747321ddbebd080d2fd -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Tue Jan 5 16:09:20 2010 +0100 - - Updated Norwegian bokmål translation. - - po/nb.po | 479 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 243 insertions(+), 236 deletions(-) - -commit 36f6627b43776776b199a109ab982996b8d12905 -Author: Philip Withnall <philip@tecnocode.co.uk> -Date: Fri Jan 1 14:02:35 2010 +0000 - - Remove Pango markup from translatable strings where possible - - Use GtkBuilder attributes on labels instead. Fixes bug #605852. - - data/eog-image-properties-dialog.ui | 120 ++++++++++++++++++++++++------------ - data/eog-multiple-save-as-dialog.ui | 30 ++++++--- - data/eog-preferences-dialog.ui | 24 +++++--- - 3 files changed, 118 insertions(+), 56 deletions(-) - -commit 7dd5435f7640a9bdeced67f4a6f66c90327eb18a -Author: Philip Withnall <philip@tecnocode.co.uk> -Date: Fri Jan 1 13:54:30 2010 +0000 - - Miscellaneous string fixes - - Various string fixes, including capitalisation, punctuation and terminology - fixes. Proper Unicode ellipsis characters have been introduced, as well as - proper multiplication symbols. Fixes bug #605851. - - data/eog.schemas.in | 29 ++++++++++++++--------------- - src/eog-print-image-setup.c | 2 +- - src/eog-window.c | 16 ++++++++-------- - src/main.c | 4 ++-- - 4 files changed, 25 insertions(+), 26 deletions(-) - -commit ae756b809595a96bf687436a0e2aa3a754d856bf -Author: Philip Withnall <philip@tecnocode.co.uk> -Date: Fri Jan 1 13:47:26 2010 +0000 - - Updated British English translation - - po/en_GB.po | 349 +++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 204 insertions(+), 145 deletions(-) - -commit 34fec6b71cead8ab09ca2ebc4d16d79acbbcc803 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Dec 30 19:55:02 2009 +0100 - - Reuse the last path used for Save As in the single-file Save As dialog - - If the path that was last used for Save As is still existing reuse it - the next time. If it's not or it's the first Save As operation of the - session the old behaviour (using the source path) is applied. - Fixes bug #604230. - - src/eog-window.c | 32 ++++++++++++++++++++++++++------ - 1 file changed, 26 insertions(+), 6 deletions(-) - -commit 7f76e382a911f71a8e834f2c4bf74570b8ca9c9a -Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> -Date: Thu Dec 24 12:50:00 2009 +0700 - - po/vi.po: Updated Vietnamese translation - - po/vi.po | 545 +++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 341 insertions(+), 204 deletions(-) - -commit acae4185ff648807f0f4a638eaf057d389f75130 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Wed Dec 16 12:22:04 2009 +0100 - - Updated Norwegian bokmål translation. - - po/nb.po | 16 ++++++++++------ - 1 file changed, 10 insertions(+), 6 deletions(-) - -commit 3e31c95abb26cd780aacc3c296a95023b05824c8 -Author: Nils-Christoph Fiedler <fiedler@medienkompanie.de> -Date: Mon Dec 14 01:44:12 2009 +0100 - - Updated LowGerman translation - - po/nds.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 8d0bae91544599515da8222d4ddd92732eb05085 -Author: Nils-Christoph Fiedler <fiedler@medienkompanie.de> -Date: Mon Dec 14 01:35:35 2009 +0100 - - Added LowGerman translation - - po/LINGUAS | 1 + - 1 file changed, 1 insertion(+) - -commit 802d7e5d8f8c94d3f60afe1428eea237d4ff1748 -Author: Nils-Christoph Fiedler <fiedler@medienkompanie.de> -Date: Mon Dec 14 01:35:28 2009 +0100 - - Added LowGerman translation - - po/nds.po | 1343 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 1343 insertions(+) - -commit f4766644dd558a1c5c6a149226a4ab3d4c81796b -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Dec 13 11:53:01 2009 +0100 - - Fix compiler warning - - src/eog-close-confirmation-dialog.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 3793023b1bb6ec41890f7c84c488370cc1a1c655 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Tue Dec 8 17:58:05 2009 +0100 - - Updated Spanish translation, fixed typo - - po/es.po | 8 +++----- - 1 file changed, 3 insertions(+), 5 deletions(-) - -commit 96f98ee67b782e907cbdf1917bf76568edf5182e -Author: Yair Hershkovitz <yairhr@gmail.com> -Date: Sun Dec 6 08:52:03 2009 +0200 - - Updated Hebrew translation - - po/he.po | 352 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 204 insertions(+), 148 deletions(-) - -commit 996fd335c7c4450216658afa6f9bc02cdaebfc5c -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Fri Dec 4 21:50:37 2009 +0100 - - Updated Norwegian bokmål translation. - - po/nb.po | 278 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 147 insertions(+), 131 deletions(-) - -commit 453ec626bb9af69482c3cf9c3ac8668764a72016 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Dec 1 13:48:40 2009 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 3f8d698bebc1899cc61fd232044a41b2051977a9 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Dec 1 13:42:38 2009 +0100 - - Update for 2.29.3 - - NEWS | 11 +++++++++++ - 1 file changed, 11 insertions(+) - -commit a84ad69aac7ac4c9274037bfc8968c455590dfd4 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Dec 1 13:26:23 2009 +0100 - - Avoid warnings in CloseConfirmDlg when thumbs are not loaded - - This is merely a workaround until we find the real fix. This avoids the - warnings when some thumbnails of changed images are not loaded (e.g. - because the collection is hidden). Instead a generic icon is shown. - - src/eog-close-confirmation-dialog.c | 46 +++++++++++++++++++++++++++++++++---- - 1 file changed, 41 insertions(+), 5 deletions(-) - -commit 74268d4bac49d5c15268c9375f8b853e5b860df6 -Author: Tao Wei <weitao1979@gmail.com> -Date: Mon Nov 30 16:42:24 2009 +0800 - - Updated Simplified Chinese translation. - - po/zh_CN.po | 250 ++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 127 insertions(+), 123 deletions(-) - -commit 8cbf69edca2c35c7ac81f150b6cb2c9653498cd2 -Author: Felix Riemann <friemann@gnome.org> -Date: Fri Nov 27 21:33:23 2009 +0100 - - Remove unneeded variable - - The variable 'next_state' was a lost carry-on from the JPEG reader, - which was the base for the PNG reader. It was never used here and was - even faulty in one case. - - 'chunk_len' was likely used during initial development of the PNG reader - but was never in the final version. - - src/eog-metadata-reader-png.c | 10 ++-------- - 1 file changed, 2 insertions(+), 8 deletions(-) - -commit 17d4f73537c4b3792b693cc643c50b0fd7544510 -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Thu Nov 26 07:49:32 2009 +0200 - - Updated Arabic translation - - po/ar.po | 263 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 150 insertions(+), 113 deletions(-) - -commit 659403e321ef02fca024342773042c96300a16d6 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Nov 22 12:32:59 2009 +0100 - - Raise gtk+ dependency to 2.17.5 - - This version is needed for commit d6b1a635 due to the accessor to the - activatable property of the ToggleCellRenderer. - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit d6b1a6351ccb2e87ecdbfb071120247bfc79b79b -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Nov 22 12:23:51 2009 +0100 - - Add func to get the close confirmation dialog in an insensitive state - - This state is special therein that it is not making the whole dialog - insensitive, but only the buttons and the checkbox column in the - treeview. That way the main window doesn't need to be made insensitive - during saving to avoid interaction. Alltogether this should improve the - situation visually quite a bit. - - src/eog-close-confirmation-dialog.c | 18 +++++++++++++++++- - src/eog-close-confirmation-dialog.h | 1 + - src/eog-window.c | 3 +-- - 3 files changed, 19 insertions(+), 3 deletions(-) - -commit aca371d4aafafc3290a770a29516bbf95f9c256e -Author: Ivar Smolin <okul@linux.ee> -Date: Sun Nov 22 12:17:14 2009 +0200 - - Updating Estonian translation - - po/et.po | 33 +++++++++++++++++++++++++++++++-- - 1 file changed, 31 insertions(+), 2 deletions(-) - -commit 206d79cd0d8c0dabc907dd9e1c3aab39e6a3ab13 -Author: Aron Xu <aronxu@gnome.org> -Date: Sat Nov 21 20:50:26 2009 +0800 - - Correct a typo - - po/zh_CN.po | 457 ++++++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 291 insertions(+), 166 deletions(-) - -commit 71b38a132362e79581a86aa68d8d0d1ce7492411 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Nov 17 21:36:43 2009 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 51226113da011a49faa56516c4ea95cddd0a533d -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Nov 17 21:26:21 2009 +0100 - - Update for release 2.29.2 - - NEWS | 21 ++++++++++++++++++++- - 1 file changed, 20 insertions(+), 1 deletion(-) - -commit 478928adeb7b49506cac094014ffdd6d1b119324 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Tue Nov 17 08:28:03 2009 +0100 - - Updated Slovenian translation - - po/sl.po | 335 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 185 insertions(+), 150 deletions(-) - -commit 2acd79bddaf91bf39b01a80821dc7ee1c64dcb49 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sun Nov 15 23:03:07 2009 +0100 - - Updated Spanish translation - - po/es.po | 264 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 152 insertions(+), 112 deletions(-) - -commit 295675deeaf0506c38190e9d4e8f95ece9cf0f8f -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Nov 15 21:18:11 2009 +0100 - - Keep the dialog alive during saving to lock the main window - - Make both window and dialog insensitive to avoid any further change to - the images during longer save operations. - - src/eog-window.c | 9 +++++---- - 1 file changed, 5 insertions(+), 4 deletions(-) - -commit 90f583ced89d53c851edd29acf6316c96fb8d660 -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Nov 15 21:03:44 2009 +0100 - - Reword save confirm dialog and hook it into intltool - - Makes the secondary labels sound a bit less dramatic. - - po/POTFILES.in | 1 + - src/eog-close-confirmation-dialog.c | 5 ++--- - 2 files changed, 3 insertions(+), 3 deletions(-) - -commit b53f8c99ea0a3265e746a0711449dd8b2720170b -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Nov 15 20:52:39 2009 +0100 - - Update copyright year in the save conirmation dialog sources - - src/eog-close-confirmation-dialog.c | 2 +- - src/eog-close-confirmation-dialog.h | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -commit c7e758832bc1db897c01cce32e04735c01b879ae -Author: Marcus Carlson <marcus@mejlamej.nu> -Date: Sun Nov 15 20:50:11 2009 +0100 - - Add dialog asking wheter to save changes on exit - - The dialog used is based on the one used by gedit. It allows to - decide for every changed image. Fixes bgo#322243. - - src/Makefile.am | 2 + - src/eog-close-confirmation-dialog.c | 648 ++++++++++++++++++++++++++++++++++++ - src/eog-close-confirmation-dialog.h | 71 ++++ - src/eog-window.c | 152 ++++++++- - 4 files changed, 863 insertions(+), 10 deletions(-) - -commit 62f1a9c1a05208cf28f9c26f248d15883e6dc8fd -Author: Sebastien Bacher <seb128@ubuntu.com> -Date: Sun Nov 15 20:20:49 2009 +0100 - - Don't use LOCALMODLIBS in configure - - LOCALMODLIBS is supposed to be used only when linking the interpreter. - Fixes build problems with certain python configs and bgo#600893. - - configure.ac | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -commit 380767cac05ec7c994621c7a7441bd942aa1eb55 -Author: Antón Méixome <meixome@mancomun.org> -Date: Fri Nov 13 11:23:54 2009 +0100 - - Updated Galician Translation - - po/gl.po | 296 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 159 insertions(+), 137 deletions(-) - -commit a107a3666666be4763fdf79f513260b158dd6f2b -Author: Thomas Thurman <tthurman@Dorothy.plexq.com> -Date: Sun Nov 8 12:02:13 2009 +0000 - - Shavian translation - - po/LINGUAS | 1 + - po/en@shaw.po | 1192 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1193 insertions(+) - -commit b8efaa708248e7e8f20043078765564cb35053bb -Author: Alexander Shopov <ash@contact.bg> -Date: Sat Nov 7 10:11:05 2009 +0200 - - Updated Bulgarian translation - - po/bg.po | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - -commit 2bb4170beeeba0bd50b9bac1d66ef70f29236ac2 -Author: Alexander Shopov <ash@contact.bg> -Date: Sat Nov 7 10:06:56 2009 +0200 - - Updated Bulgarian translation - - po/bg.po | 256 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 139 insertions(+), 117 deletions(-) - -commit 4f4e3ffa04e2c48d2f3786bf2d908a6db56aae82 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Oct 27 22:54:55 2009 +0100 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 47dc25cc1dc5f567f5fb3e6829edead9ea9ef978 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Oct 27 23:49:45 2009 +0100 - - Prepare for Release 2.29.1 - - NEWS | 39 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 39 insertions(+) - -commit f8e7122d306020a1d6eaa21fd13aa684c3ddb173 -Author: drtvasudevan <agnihot3@gmail.com> -Date: Tue Oct 27 13:17:29 2009 +0530 - - Updated Tamil translation - - po/ta.po | 332 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 174 insertions(+), 158 deletions(-) - -commit 24f960d26cdfc4b69f690eba3cd02dd69bc46bf8 -Author: drtvasudevan <agnihot3@gmail.com> -Date: Tue Oct 27 13:15:38 2009 +0530 - - Updated Tamil translation - - po/ta.po | 28 +++++++++++++++++++--------- - 1 file changed, 19 insertions(+), 9 deletions(-) - -commit 230e7f1d9181de5296a396d52d9a41b67baffe4f -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Oct 25 20:21:29 2009 +0100 - - Update git.mk - - git.mk | 174 ++++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 90 insertions(+), 84 deletions(-) - -commit 53d23233729079bf5e9c00eb9b50d173ab81fb9e -Author: Raoul Berger <contact@raoulito.info> -Date: Thu Oct 22 19:16:46 2009 +0200 - - Fix mem leak when rotating animations - - src/eog-scroll-view.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -commit 8871921af177bc83bd65cc3e8d8a84bada52576e -Author: Petr Kovar <pknbe@volny.cz> -Date: Mon Oct 19 15:08:31 2009 +0200 - - Updated Czech translation by Adrian Gunis - - Reviewed by: Petr Kovar. - - po/cs.po | 266 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 145 insertions(+), 121 deletions(-) - -commit f7cc7ba9c2eb2d12c96ef3a509519e4fc00bdc4f -Author: Felix Riemann <friemann@gnome.org> -Date: Sun Oct 18 17:44:24 2009 +0200 - - Prepare development branch - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit a8133caa982f783c615eec8c8aa7eb6b0e5a9a95 -Author: Raoul Berger <contact@raoulito.info> -Date: Sun Oct 18 17:31:12 2009 +0200 - - Add support for animated images - - Plays animated images in eog as supported by GdkPixbufAnimation. - Fixes bgo#335093. - - src/eog-image-private.h | 3 ++ - src/eog-image.c | 139 +++++++++++++++++++++++++++++++++++++++++++++++- - src/eog-image.h | 7 +++ - src/eog-scroll-view.c | 31 ++++++++++- - 4 files changed, 177 insertions(+), 3 deletions(-) - -commit 10d243bb8e6f5d0ea4e8005b49851498153efe4d -Author: A S Alam <aalam@users.sf.net> -Date: Thu Oct 15 13:14:34 2009 +0530 - - Complete Translation for Punjabi - - po/pa.po | 281 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 149 insertions(+), 132 deletions(-) - -commit 376ffe828bc48df79a41ac6dc97dc44d5741e270 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Tue Oct 13 14:56:55 2009 +0200 - - Updated Slovenian translation - - po/sl.po | 272 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 150 insertions(+), 122 deletions(-) - -commit 7cc64dad66df4b71c0bf162db05b14894598dc7d -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Tue Oct 13 02:35:05 2009 +0200 - - Small update - - po/hu.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 011d68548f93cfe2fcf20c51075d4d5f71389472 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Oct 12 16:23:00 2009 +0200 - - Set sensitivity for Save and Undo on image load - - They were disabled before which made it impossible to do changes to an - image, switch to another, switch back and try to save/undo the changes. - Respect lockdown settings for Save. - - src/eog-window.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -commit bab906c52f31e96e4b7311cd04fd8e92299a8791 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Oct 12 16:08:27 2009 +0200 - - Fix arrow key behavior without collection in RTL locales - - Left/Right arrows are simply mapped to Up/Down. This makes sure this - mapping gets inverted in RTL locales. Fixes bgo#566104. - - src/eog-window.c | 20 ++++++++++++++++++-- - 1 file changed, 18 insertions(+), 2 deletions(-) - -commit c790e8f6a65d4854ecbd0a2b2c05036c78792b26 -Author: Luca Ferretti <elle.uca@libero.it> -Date: Mon Oct 12 09:13:57 2009 +0200 - - Fix previous commit - - po/it.po | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 646f59bff50231fce27a365cc8bb7524a25f60dd -Author: Luca Ferretti <elle.uca@libero.it> -Date: Mon Oct 12 09:10:32 2009 +0200 - - Updated Italian translation - - po/it.po | 250 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 139 insertions(+), 111 deletions(-) - -commit 089402401b9c8f6123c58f019fb3564aea81e444 -Author: Leonid Kanter <leon@asplinux.ru> -Date: Sun Oct 11 14:49:52 2009 +0300 - - Updated Russian translation - - po/ru.po | 562 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 331 insertions(+), 231 deletions(-) - -commit e180037074fb74143b767282afaee256baa52f78 -Author: Kjartan Maraas <kmaraas@gnome.org> -Date: Sun Oct 11 12:46:43 2009 +0200 - - Updated Norwegian bokmål translation. - - po/nb.po | 319 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 169 insertions(+), 150 deletions(-) - -commit 4d37adc13e3ebe010f86ae9a31f59b5ad967d260 -Author: Christian Kirbach <Christian.Kirbach@googlemail.com> -Date: Sun Oct 11 00:04:30 2009 +0200 - - Updated German translation - - po/de.po | 260 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 143 insertions(+), 117 deletions(-) - -commit e941e58e6d4c4f1f34f1bb4bb3ff263ff3d41ae2 -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Sat Oct 10 21:58:37 2009 +0200 - - Updated Hungarian translation - - po/hu.po | 261 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 142 insertions(+), 119 deletions(-) - -commit bd249b2ec8dab2355a6d34fe13108bb19fefa63e -Author: Ivar Smolin <okul@linux.ee> -Date: Sat Oct 10 16:08:45 2009 +0300 - - Updating Estonian translation - - po/et.po | 60 +++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 33 insertions(+), 27 deletions(-) - -commit 2667d9e607102f762294e3c2b2dd1382ae53fe64 -Author: Wancharle Sebastião Quirino <wancharle@gmail.com> -Date: Sat Oct 10 08:25:08 2009 -0300 - - Updated the Brazilian Portuguese translation. - - po/pt_BR.po | 264 +++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 144 insertions(+), 120 deletions(-) - -commit cc032f145727c4182e24ac4f2de3c3f1299e7ac8 -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Sat Oct 10 12:47:01 2009 +0200 - - Minor Arabic fix - - help/ar/figures/eog_save_as_window.png | Bin 35751 -> 35692 bytes - po/ar.po | 8 ++++---- - 2 files changed, 4 insertions(+), 4 deletions(-) - -commit 38f7d373e90b9d062050a8a6446230dd1e5ee7d8 -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Sat Oct 10 12:35:26 2009 +0200 - - Updated Arabic translation - - help/ar/ar.po | 1196 +++++++++++++++++++------ - help/ar/figures/eog_save_as_window.png | Bin 28773 -> 35751 bytes - help/ar/figures/eog_start_window.png | Bin 18496 -> 16121 bytes - help/ar/figures/eog_toolbar_editor_window.png | Bin 25066 -> 31158 bytes - 4 files changed, 925 insertions(+), 271 deletions(-) - -commit aa32c3254014cb060dff9fe10dbdd32417914d26 -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Sat Oct 10 11:59:12 2009 +0200 - - Updated Arabic translation - - po/ar.po | 22 ++++++++++++++-------- - 1 file changed, 14 insertions(+), 8 deletions(-) - -commit 2e1c0143565812264250e62ed4e38c368cf028f7 -Author: Jorge González <jorgegonz@svn.gnome.org> -Date: Sat Oct 10 10:54:24 2009 +0200 - - Updated Spanish translation - - po/es.po | 323 +++++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 171 insertions(+), 152 deletions(-) - -commit 4491cf5d64374e41ded5fdeef5593b3122c7704b -Author: Gil Forcada <gforcada@gnome.org> -Date: Sat Oct 10 00:05:54 2009 +0200 - - Minor fix to Catalan translation - - po/ca.po | 244 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 133 insertions(+), 111 deletions(-) - -commit 45512b79af27089db2d6d8b3a3356cf614be1c8a -Author: Claude Paroz <claude@2xlibre.net> -Date: Fri Oct 9 19:42:22 2009 +0200 - - Updated French translation - - po/fr.po | 259 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 142 insertions(+), 117 deletions(-) - -commit 5c0a4f8192e17bcd64853162dc1335a1dc4b5f48 -Author: Daniel Nylander <po@danielnylander.se> -Date: Fri Oct 9 19:13:36 2009 +0200 - - Updated Swedish translation - - po/sv.po | 342 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 175 insertions(+), 167 deletions(-) - -commit b9b42eeab629a05c3e162eb8f2caca7b2830ae6b -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Fri Oct 9 17:21:22 2009 +0200 - - Updated Arabic translation - - po/ar.po | 269 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 149 insertions(+), 120 deletions(-) - -commit f3902a4159d04bcb2f80203507178e7b01970575 -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Fri Oct 9 19:06:28 2009 +0200 - - Make statusbar strings translatable - - Fixes #597059. Makes statusbar message and image counter translatable. - - src/eog-statusbar.c | 12 +++++++++++- - src/eog-window.c | 19 ++++++++++++------- - 2 files changed, 23 insertions(+), 8 deletions(-) - -commit ec87c9b2919995503122b966c900de8156d10e32 -Author: Josh Lee <jleedev@gmail.com> -Date: Thu Oct 8 13:28:45 2009 +0200 - - Fix slideshow display with invalid timer values - - Timer values smaller than 1 (only settable by hand in GConf) should stop - the automatic image switching. This fixes broken image view in those - cases. Fixes bgo#597754. - - src/eog-window.c | 3 +++ - 1 file changed, 3 insertions(+) - -commit 00ff0cf6c523dac1cbb5ec869c78ef0f598a008a -Author: Denis ARNAUD <darnaud@src.gnome.org> -Date: Mon Oct 5 06:19:53 2009 +0200 - - Updated breton translation - - po/br.po | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit 90295b612ef85dfca4f94a20efe4c48efccf530e -Author: Joan Duran <jodufi@gmail.com> -Date: Fri Oct 2 00:28:13 2009 +0200 - - Updated Catalan translation - - po/ca.po | 425 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 250 insertions(+), 175 deletions(-) - -commit 18da0a94d357d12d5b6e80669bf39dfbfb51f07f -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Sep 22 23:00:29 2009 +0200 - - Pre-init conditionally used pointers on stack - - This is to avoid problems (eg. crashes) in case the stack is not clean. - - src/eog-properties-dialog.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit cf06700f8d2d45c3d582e2dc071c8fce72db468c -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Sep 22 22:57:39 2009 +0200 - - Remove unused variables and unnecessary assignments - - plugins/reload/eog-reload-plugin.c | 3 --- - src/eog-properties-dialog.c | 1 - - 2 files changed, 4 deletions(-) - -commit 213a4c70f34cb4319ee39422569fbdb533456d09 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Sep 21 17:41:44 2009 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8743a2f863e4c7edc0e075af197a355ee0852a31 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Sep 21 17:37:53 2009 +0200 - - Update for Release 2.28.0 - - NEWS | 28 ++++++++++++++++++++++++++++ - configure.ac | 4 ++-- - 2 files changed, 30 insertions(+), 2 deletions(-) - -commit e9deee52d8a5cdec316843307ebbbf807d285fda -Author: Amitakhya Phukan <aphukan@fedoraproject.org> -Date: Mon Sep 21 13:08:13 2009 +0530 - - Updating Assamese translations - - po/as.po | 533 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 304 insertions(+), 229 deletions(-) - -commit 8199af0725f975f5c920ed2ed4a8d2fe4498eaf9 -Author: Ask H. Larsen <asklarsen@gmail.com> -Date: Mon Sep 21 00:03:17 2009 +0200 - - Updated Danish translation - - help/da/da.po | 720 +++++++++++++++++++++++++++++----------------------------- - 1 file changed, 359 insertions(+), 361 deletions(-) - -commit e76786389211eebfe73f9d234893fa7d9ba83df1 -Author: Matej Urbančič <mateju@svn.gnome.org> -Date: Fri Sep 18 14:10:02 2009 +0200 - - Updated Slovenian translation - - po/sl.po | 518 +++++++++++++++++++++++++++++---------------------------------- - 1 file changed, 240 insertions(+), 278 deletions(-) - -commit ea0da4220b46512abe7bc41daad0c07effaeb102 -Author: Manoj Kumar Giri <mgiri@mgiri.csb> -Date: Thu Sep 17 22:37:40 2009 +0530 - - Upadated Oriya Translation - - po/or.po | 264 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 134 insertions(+), 130 deletions(-) - -commit caaf518e5c795320cf6d904f8bcdae912178ad92 -Author: Maxim V. Dziumanenko <dziumanenko@gmail.com> -Date: Wed Sep 16 17:26:39 2009 +0300 - - Added Ukrainian translation - - po/uk.po | 341 +++++++++++++++++++++++++++++++++++---------------------------- - 1 file changed, 189 insertions(+), 152 deletions(-) - -commit f312803660a1455d0ac1a0164fc3a859ff7b9d59 -Author: Rajesh Ranjan <rranjan@rranjan.csb> -Date: Wed Sep 16 16:21:46 2009 +0530 - - hindi update by Rajesh Ranjan - - po/hi.po | 425 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 246 insertions(+), 179 deletions(-) - -commit b1b2d5fd8b16d20b4a78bafd85f74399addc9d36 -Author: Runa Bhattacharjee <runab@redhat.com> -Date: Wed Sep 16 15:21:40 2009 +0530 - - Updated Bengali India Translation - - po/bn_IN.po | 55 +++++++++++++++++++++++++++++++------------------------ - 1 file changed, 31 insertions(+), 24 deletions(-) - -commit a2464be0252f2dda780c2d5e5fa9d904b23370c5 -Author: Adi Roiban <adi@roiban.ro> -Date: Tue Sep 15 00:01:35 2009 +0300 - - Updated Romanian translation - - po/ro.po | 583 +++++++++++++++++++++++++++++++++++++++------------------------ - 1 file changed, 361 insertions(+), 222 deletions(-) - -commit a99a97d7b98f69fead677bda14a54b3d83a2070c -Author: Astur <malditoastur@gmail.com> -Date: Mon Sep 14 16:41:54 2009 +0200 - - Added Asturian translation - - po/LINGUAS | 1 + - po/ast.po | 1394 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1395 insertions(+) - -commit ba377a3d0741b1303efd41b1cab9fe2f9f3855e0 -Author: Ask H. Larsen <asklarsen@gmail.com> -Date: Sun Sep 13 03:01:54 2009 +0200 - - Updated Danish translation - - po/da.po | 418 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 246 insertions(+), 172 deletions(-) - -commit 62f6e109060de427e37282407b6b1e26027a810b -Author: Philip Withnall <philip@tecnocode.co.uk> -Date: Sat Sep 12 23:53:24 2009 +0100 - - Updated British English translation - - po/en_GB.po | 435 +++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 254 insertions(+), 181 deletions(-) - -commit c717837f9b8b75cafcb081b5ed9611a85d0d5ead -Author: Sweta Kothari <swkothar@redhat.com> -Date: Fri Sep 11 18:49:21 2009 +0530 - - Updated Gujarati Translations - - po/gu.po | 426 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 248 insertions(+), 178 deletions(-) - -commit e1a959345967e2036e529286a30f184c0a7491da -Author: Shankar Prasad <svenkate@redhat.com> -Date: Fri Sep 11 14:45:47 2009 +0530 - - Updated Kannada(kn) translation - - po/kn.po | 247 ++++++++++++++++++++++++++++++--------------------------------- - 1 file changed, 119 insertions(+), 128 deletions(-) - -commit 4b9fcfcae1cdd2f2bf128cd936d6bab74041a460 -Author: Ani <peter.ani@gmail.com> -Date: Fri Sep 11 14:30:04 2009 +0530 - - Updated Malayalam Translations - - po/ml.po | 440 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 257 insertions(+), 183 deletions(-) - -commit f834c7501ada3c7c3812b361ad94c12ed7e23bc6 -Author: A S Alam <aalam@users.sf.net> -Date: Fri Sep 11 07:23:44 2009 +0530 - - Updating Translation for Punjabi - - po/pa.po | 396 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 228 insertions(+), 168 deletions(-) - -commit cf30dd5202e445ae461824da11821cc5c5af48af -Author: Kostas Papadimas <pkst@gnome.org> -Date: Thu Sep 10 18:31:49 2009 +0300 - - Updated Greek translation. - - help/el/el.po | 1274 +++++++++++++++++++++++++++++++++++++++++++++------------ - po/el.po | 342 +++++++++------- - 2 files changed, 1201 insertions(+), 415 deletions(-) - -commit 92bbab51e73942bafaf90158dfccceb971a99d1c -Author: Gintautas Miliauskas <gintautas@miliauskas.lt> -Date: Thu Sep 10 14:10:24 2009 +0300 - - Updated Lithuanian translation. - - po/lt.po | 377 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 215 insertions(+), 162 deletions(-) - -commit 1f8510da7c8790ec95648eed641784031a82a936 -Author: krishnababu k <kkrothap@redhat.ocm> -Date: Thu Sep 10 15:46:11 2009 +0530 - - Updated Telugu Translation - - po/te.po | 506 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 271 insertions(+), 235 deletions(-) - -commit 336d8807341caf617a39a07abcde64865dcc3ffe -Author: Sandeep Shedmake <sshedmak@redhat.com> -Date: Wed Sep 9 14:03:47 2009 +0530 - - Updated Marathi Translations - - po/mr.po | 443 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 251 insertions(+), 192 deletions(-) - -commit 97c9c36cc7e71706c50f599c34297bfef04b2e33 -Author: Denis ARNAUD <darnaud@src.gnome.org> -Date: Wed Sep 9 06:06:56 2009 +0200 - - Updated breton translation - - po/br.po | 381 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 196 insertions(+), 185 deletions(-) - -commit 5d158eec52b733df7d2b2da54fb8d743ad0f8677 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Sep 8 12:28:43 2009 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit c57516a5e8ed7ef5d8760afcd5588ca07046a70e -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Sep 8 12:17:05 2009 +0200 - - Update for Release 2.27.92 - - NEWS | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - -commit a3723c53bd30d65cd91a443387fb463131e0abe5 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Sep 8 11:47:13 2009 +0200 - - Compare collate keys case-sensitively when sorting the image list - - Fixes broken image order in some locales (eg. cs_CZ). Fixes bgo#594403. - - src/eog-list-store.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -commit ec41a2a8c1db6d8bdb3cf953c7309c3e3fd2940e -Author: Gabor Kelemen <kelemeng@gnome.hu> -Date: Sat Sep 5 19:04:05 2009 +0200 - - Hungarian translation updated - - po/hu.po | 445 ++++++++++++++++++++++++++++++++++++--------------------------- - 1 file changed, 258 insertions(+), 187 deletions(-) - -commit b92c806ff87a6846a49a0e405367ee8cf985ba51 -Author: Shankar Prasad <svenkate@redhat.com> -Date: Tue Sep 1 10:48:22 2009 +0530 - - Updated Kannada(kn) translation - - po/kn.po | 459 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 272 insertions(+), 187 deletions(-) - -commit c472da8747ab6ffbf2f3f98b7af5e5fe6c6885de -Author: Runa Bhattacharjee <runab@redhat.com> -Date: Mon Aug 31 16:50:19 2009 +0530 - - Updated Bengali India Translations - - po/bn_IN.po | 435 +++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 252 insertions(+), 183 deletions(-) - -commit b314ba281a3799410dce7bb71a33d47116a6663b -Author: Baris Cicek <baris@teamforce.name.tr> -Date: Sun Aug 30 06:37:46 2009 +0300 - - Updated Turkish translation from Askin Yollu. - - po/tr.po | 690 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 404 insertions(+), 286 deletions(-) - -commit bddc830b4ec5cac8633849da395d2d96f55f3503 -Author: Changwoo Ryu <cwryu@debian.org> -Date: Sun Aug 30 07:55:02 2009 +0900 - - Update Korean translation - - po/ko.po | 413 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 225 insertions(+), 188 deletions(-) - -commit de6c0ca0dd173ca590b13ed5c9229b389ffda56c -Author: Davide Falagna <davide.falagna@alice.it> -Date: Fri Aug 28 14:42:06 2009 +0200 - - Updated Italian translation - - po/it.po | 446 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 261 insertions(+), 185 deletions(-) - -commit e5919d15240cde5fcdb824b643a848a73e4e4c88 -Author: Miloš Popović <mpopovic@src.gnome.org> -Date: Fri Aug 28 03:13:50 2009 +0200 - - Updated Serbian translation - - po/sr.po | 412 ++++++++++++++++++++++++++++++++++----------------------- - po/sr@latin.po | 412 ++++++++++++++++++++++++++++++++++----------------------- - 2 files changed, 494 insertions(+), 330 deletions(-) - -commit 09fd5393fb8f9e48289735a80960976a57a12ec8 -Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> -Date: Wed Aug 26 10:50:43 2009 +0200 - - Updated Basque language - - po/eu.po | 257 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 128 insertions(+), 129 deletions(-) - -commit 881fa5a4ad4f9ecd7a6d0f5415f063086813a614 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Aug 25 20:00:21 2009 +0200 - - Don't try to autorotate before the metadata was loaded - - Autorotation would fail in that case. As it is only performed once for - each image a simple image dimension query could prevent autorotation - entirely for an image. Fixes bgo#592945. - - Closes: http://bugzilla.gnome.org/show_bug.cgi?id=592945 - - src/eog-image.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -commit 3c501d254c968bcd955194a6881c7b5bb8868c34 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Aug 25 19:56:17 2009 +0200 - - Fix check if only the image dimensions need to be loaded - - The check was assuming that if there's more requested than only image - dimensions. This breaks with the image collection tooltips which don't - request image data but Exif data in addition to the dimensions. - - src/eog-image.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -commit f54d50e992ed57bb06ea433de65d9cce8d129463 -Author: Denis Arnaud <darnaud@src.gnome.org> -Date: Tue Aug 25 04:58:26 2009 +0200 - - Updated breton translation and added br in LINGUAS - - po/LINGUAS | 1 + - po/br.po | 1288 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 1289 insertions(+) - -commit b04ccc996dfe73a52d4b6f5bace88728c61cf8f3 -Author: Duarte Loreto <happyguy_pt@hotmail.com> -Date: Tue Aug 25 00:29:06 2009 +0100 - - Updated Portuguese translation - - po/pt.po | 433 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 252 insertions(+), 181 deletions(-) - -commit 0dcd4b684c76c094b065851cecb99a69fc8a4599 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Aug 25 00:06:42 2009 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit 8e72af0a4681585e871c25697f36d2d87063feb5 -Author: Felix Riemann <friemann@gnome.org> -Date: Tue Aug 25 00:02:30 2009 +0200 - - Update for Release 2.27.91 - - NEWS | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - -commit 66d71ddf5d7129a02bcee28931ba6e8d8d592289 -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Aug 24 18:08:42 2009 +0200 - - Don't access Exif data unconditionally, even in EogImage itself - - This could lead to a race condition with broken Exif data when having - certain plugins like the statusbar-date plugin enabled. - This hopefully fixes bgo#590693. - - src/eog-image.c | 12 +++++++++--- - 1 file changed, 9 insertions(+), 3 deletions(-) - -commit bc010e9885f3be9f50f37366e4f6fd6910c103db -Author: Felix Riemann <friemann@gnome.org> -Date: Mon Aug 24 17:59:25 2009 +0200 - - Fix critical warnings in last commit - - Avoids critical warnings because we forgot that g_app_info_get_icon - can return NULL in commit 7bba458. - - src/eog-window.c | 10 +++++++--- - 1 file changed, 7 insertions(+), 3 deletions(-) - -commit 7bba45892744820d252fd981029ee93a22fec21e -Author: Marcus Carlson <gnomebugzilla@mejlamej.nu> -Date: Mon Aug 24 17:47:15 2009 +0200 - - Make "Open with" menu look similar to Nautilus's - - Removes the duplicate "Open with..," prefix for menu entries and - displays the application icon if available. This will make the menu look - more like the "Open with" list in nautilus (not identical though). - - Closes: http://bugzilla.gnome.org/show_bug.cgi?id=592649 (bgo#592649). - - src/eog-window.c | 36 +++++++++++++++++++++++++++++++++++- - 1 file changed, 35 insertions(+), 1 deletion(-) - -commit c3defb14a992bce58018c16872b22f9aa32fc25f -Author: Theppitak Karoonboonyanan <thep@linux.thai.net> -Date: Sun Aug 23 12:33:34 2009 +0700 - - Updated Thai translation. - - po/th.po | 416 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 244 insertions(+), 172 deletions(-) - -commit fb24fbe8e4234a6a55afca55180c254512ac24a4 -Author: Adrian Guniš <andygun696@gmail.com> -Date: Thu Aug 20 22:14:51 2009 +0200 - - Update Czech translation - - po/cs.po | 18 ++++++++++-------- - 1 file changed, 10 insertions(+), 8 deletions(-) - -commit fdf87686a8330f3632d102ac1ed8a6384d7f0ea8 -Author: Khaled Hosny <khaledhosny@eglug.org> -Date: Thu Aug 20 22:54:23 2009 +0300 - - Updated Arabic translation - - po/ar.po | 291 +++++++++++++++++++++++++++++++-------------------------------- - 1 file changed, 142 insertions(+), 149 deletions(-) - -commit 17a79876415702dfa64e37b1c4e3cb9f9cd3dd38 -Author: Antón Méixome <meixome@mancomun.org> -Date: Wed Aug 19 14:50:57 2009 +0200 - - Updated Galician Translation - - po/gl.po | 27 ++++++++++++++++++++------- - 1 file changed, 20 insertions(+), 7 deletions(-) - -commit 1efb4057a91ff6c6407ba4c809c58369baeeb450 -Author: Alexander Shopov <ash@contact.bg> -Date: Wed Aug 19 00:32:56 2009 +0300 - - Updated Bulgarian translation - - po/bg.po | 418 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 246 insertions(+), 172 deletions(-) - -commit ebb800f8dc28472774bf87b57e41510e2dda441d -Author: Piotr Drąg <piotrdrag@gmail.com> -Date: Mon Aug 17 22:29:18 2009 +0200 - - Updated Polish translation - - po/pl.po | 617 +++++++++++++++++++++++++++++++++++++-------------------------- - 1 file changed, 366 insertions(+), 251 deletions(-) - -commit aba6e4b6ddad8cd8cfcc1c74ee41d8ab2ffe38d0 -Author: Claude Paroz <claude@2xlibre.net> -Date: Sat Aug 15 15:19:20 2009 +0200 - - Updated French translation - - Contributed by Laurent Coudeur and Claude Paroz - - po/fr.po | 420 ++++++++++++++++++++++++++++++++++++++------------------------- - 1 file changed, 251 insertions(+), 169 deletions(-) - -commit 6c9d310d60326be246bfed0ab9d357753e8348ad -Author: Seán de Búrca <leftmostcat@gmail.com> -Date: Sat Aug 15 02:01:20 2009 -0600 - - Updated Irish translation - - po/ga.po | 807 +++++++++++++++++++++++++++++++++++++++++---------------------- - 1 file changed, 533 insertions(+), 274 deletions(-) - -commit 06de0332fa6e6723e53891a81cb7a3ca01b3095d -Author: Tommi Vainikainen <thv@iki.fi> -Date: Fri Aug 14 00:34:06 2009 +0300 - - Updated Finnish translation - - po/fi.po | 338 ++++++++++++++++++++++++++++++++++----------------------------- - 1 file changed, 185 insertions(+), 153 deletions(-) - -commit e890698c1a770d6efcb7e27d4b1c4335349d2c83 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Aug 12 20:43:05 2009 +0200 - - Post-release version bump - - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -commit e03da70dd745f016b906d431f928aa5cebd7c0f7 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Aug 12 20:36:23 2009 +0200 - - Update for Release 2.27.90 - - NEWS | 31 +++++++++++++++++++++++++++++++ - 1 file changed, 31 insertions(+) - -commit d31866afb98d8d01691bbf958bae3e40224af397 -Author: Felix Riemann <friemann@gnome.org> -Date: Wed Aug 12 20:18:09 2009 +0200 - - Only put commits into autogenerated log that are not in the old ones - - The autogenerated ChangeLog only needs to contain the commits that have - not been entered in the old ChangeLog files. This means everything - before commit 3b9b307 can be filtered out. Also detect renames as such. - - Makefile.am | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - -commit 83e4007766533ff1b6d2fa4c56f22921cd59b63d -Author: Manoj Kumar Giri <mgiri@mgiri.csb> -Date: Wed Aug 12 15:05:44 2009 +0530 - - Updated Oriya Translation - - po/or.po | 611 ++++++++++++++++++++++++++++++++------------------------------- - 1 file changed, 311 insertions(+), 300 deletions(-) - -commit f2b2d6c8b2a9808fbdc1e8dcaf26805f42dc9e09 -Author: Lucas Rocha <lucasr@gnome.org> -Date: Tue Aug 11 00:18:12 2009 +0100 - - [build] Autogenerate ChangeLog on distcheck - - Makefile.am | 14 ++++++++++++++ - configure.ac | 3 ++- - 2 files changed, 16 insertions(+), 1 deletion(-) - -commit 7ed8e2ce643ca57ffb2954d2a669f6b3b4c1c326 -Author: Lucas Rocha <lucasr@gnome.org> -Date: Mon Aug 10 22:37:13 2009 +0100 - - Add ChangeLog with commit message instructions - - ChangeLog | 47 +++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 47 insertions(+) - -commit 3b9b3078297cbcf594f8f0c9e2331a4f62018b6e -Author: Lucas Rocha <lucasr@gnome.org> -Date: Mon Aug 10 22:36:23 2009 +0100 - - Rename ChangeLog to ChangeLog.pre-git - - ChangeLog => ChangeLog.pre-git | 0 - 1 file changed, 0 insertions(+), 0 deletions(-) + - When a commit closes a bug, the commit message should contain a line like: + Closes: http://bugzilla.gnome.org/show_bug.cgi?id=12345 diff -Nru eog-3.26.2/ChangeLog-3.27 eog-3.27.90/ChangeLog-3.27 --- eog-3.26.2/ChangeLog-3.27 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/ChangeLog-3.27 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,27863 @@ +# Generated by Makefile. Do not edit. + +commit 1d143e8474ba92b0202288c38881dd0efb256f25 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 11 21:20:34 2017 +0100 + + Prepare release 3.27.2 + + NEWS | 7 +++++++ + 1 file changed, 7 insertions(+) + +commit c4ff5acfe1931d5342435956448a76ecb7751c7f +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Mon Dec 4 19:59:33 2017 +0100 + + Remove the OMF file + + It’s a gnome-doc-utils/ScrollKeeper leftover. + + help/eog.omf.in | 11 ----------- + 1 file changed, 11 deletions(-) + +commit 4804e68c3398a0fc1840a3efbbea6d497f4cd0a5 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Nov 19 19:17:50 2017 +0100 + + EogCloseConfirmationDialog: Convert to GtkMessageDialog + + This makes the dialog look more modern like the dialogs in + other GNOME apps. + + https://bugzilla.gnome.org/show_bug.cgi?id=787188 + + src/eog-close-confirmation-dialog.c | 127 ++++++------------------------------ + src/eog-close-confirmation-dialog.h | 4 +- + 2 files changed, 22 insertions(+), 109 deletions(-) + +commit f269e4b04fffb0ccd8f62277d1d05744ccdd86cd +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Nov 19 15:26:52 2017 +0100 + + EogWindow: Restore the code to update the recent files list + + This partially reverts 94ceb3d5679c89a099717c3b7dc741c0558c1adb + where the code to update the recent files list was removed together + with the corresponding menu entry. Turns out the code was still useful + for the recent files list in Nautilus. + + https://bugzilla.gnome.org/show_bug.cgi?id=787750 + + src/eog-window.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 57 insertions(+) + +commit 90e55d42b055b957b9c95a072d63f6667a6f8b71 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 13 21:28:43 2017 +0100 + + Post-release version bump + + configure.ac | 2 +- + meson.build | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit 39406d770a71c27bbaeaf2fcdccb3a33e3fe826e +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 13 21:20:33 2017 +0100 + + Prepare release 3.27.1 + + NEWS | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +commit 04d0d80166e3fb09e268af4bdc0469654954c8df +Author: Iñigo Martínez <inigomartinez@gmail.com> +Date: Sun Nov 12 19:55:48 2017 +0100 + + build: Add symbol.map to distributable files + + symbol.map file which is used as a linker script, is missing from + the distributable file list in autotools. + + https://bugzilla.gnome.org/show_bug.cgi?id=784354 + + src/Makefile.am | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit 67984c03d748b4d36203c1e2c9a6e8f1492cfd14 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Nov 12 19:48:30 2017 +0100 + + build: meson: Set RPATH for eog binary + + Otherwise it wouldn't be able to find it after installation + + https://bugzilla.gnome.org/show_bug.cgi?id=784354 + + src/meson.build | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit c2e02d7b12b48a5c013110d9ebfb64edf2ebf5e8 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Nov 12 18:46:29 2017 +0100 + + build: Set prefix-relative install_dir for libeog + + While installing seems to have no issues with absolute paths + for install_dir the pkgconfig integration in meson does + and create wrong library paths in the .pc file. + + https://bugzilla.gnome.org/show_bug.cgi?id=784354 + + src/meson.build | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 031990ae0e3291f2a87a2549b1420e82653ff566 +Author: Iñigo Martínez <inigomartinez@gmail.com> +Date: Fri Nov 10 11:38:10 2017 +0100 + + build: Remove conditional EXIF documentation + + EXIF support in Eye of GNOME is conditional and it can be enabled + by using an option. When shuch option is disabled, documentation + generation with GtkDoc should exclude EXIF. + + This patch disables this behaviour also including EXIF when + documentation is generated, however a blank page will be + presented. + + https://bugzilla.gnome.org/show_bug.cgi?id=784354 + + doc/reference/eog-docs.xml | 2 -- + doc/reference/meson.build | 24 ------------------------ + 2 files changed, 26 deletions(-) + +commit b55f66560e6eff902b08346198ceb15b5500aed3 +Author: Iñigo Martínez <inigomartinez@gmail.com> +Date: Thu Jun 29 18:05:02 2017 +0200 + + build: Port to meson build system + + meson is a build system focused on speed an ease of use, which + helps speeding up the software development. This patch adds meson + support along autotools. + + https://bugzilla.gnome.org/show_bug.cgi?id=784354 + + Makefile.am | 4 + + data/Makefile.am | 3 +- + data/icons/Makefile.am | 2 + + data/icons/meson.build | 44 +++++++ + data/meson.build | 66 ++++++++++ + doc/reference/Makefile.am | 3 +- + doc/reference/eog-docs.xml | 85 +++++++++++++ + doc/reference/meson.build | 73 +++++++++++ + help/LINGUAS | 31 +++++ + help/Makefile.am | 2 + + help/meson.build | 57 +++++++++ + jpegutils/Makefile.am | 5 +- + jpegutils/meson.build | 16 +++ + meson.build | 294 +++++++++++++++++++++++++++++++++++++++++++++ + meson_options.txt | 8 ++ + meson_post_install.py | 14 +++ + plugins/Makefile.am | 4 +- + plugins/meson.build | 34 ++++++ + po/meson.build | 1 + + src/Makefile.am | 3 +- + src/meson.build | 208 ++++++++++++++++++++++++++++++++ + src/symbol.map | 6 + + tests/meson.build | 44 +++++++ + tests/template.test.in | 3 + + 24 files changed, 1005 insertions(+), 5 deletions(-) + +commit 9fe34b11eedbec4a294168a6a4936cf66702bef0 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 8 22:37:54 2017 +0100 + + build: Modernize glib-genmarshal usage + + This makes uses of the improved glib-genmarshal commandline + in preparation for the upcoming Meson build which will behave similar. + + configure.ac | 2 +- + src/Makefile.am | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit e6e4e561fda23ef9380b6b7f1a19afd819502443 +Author: Jeremy Bicha <jbicha@ubuntu.com> +Date: Wed Nov 8 12:45:14 2017 -0500 + + build: Install appstream metadata to non-deprecated location + + https://bugzilla.gnome.org/show_bug.cgi?id=790078 + + data/Makefile.am | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 841b54b7dcaaeb81e05e5d8dca7eff174dd508fe +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 8 22:00:04 2017 +0100 + + Post-branch version bump + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 0a3ef396f46d6eae2e49169a23cad227a4e11042 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 8 21:55:10 2017 +0100 + + Prepare release 3.26.2 + + NEWS | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +commit ea2902379488b3833ba4bea6339d2a842a795e65 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Mon Nov 6 15:05:35 2017 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 718 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 361 insertions(+), 357 deletions(-) + +commit be748d1a85ebc2d3392ef03aa7bbee1da6cab032 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Thu Oct 26 02:51:27 2017 +0200 + + Add Polish help translation + + help/Makefile.am | 2 +- + help/pl/figures/image-view-prefs.png | Bin 0 -> 18765 bytes + help/pl/figures/multiple-convert.png | Bin 0 -> 24653 bytes + help/pl/figures/multiple-rename-count.png | Bin 0 -> 24653 bytes + help/pl/figures/plugin-send-by-mail.png | Bin 0 -> 215420 bytes + help/pl/figures/plugins-all.png | Bin 0 -> 76205 bytes + help/pl/figures/prefs-plugins-date.png | Bin 0 -> 23326 bytes + help/pl/figures/prefs-plugins-fullscreen.png | Bin 0 -> 23365 bytes + help/pl/figures/prefs-plugins.png | Bin 0 -> 22463 bytes + help/pl/figures/slideshow-prefs.png | Bin 0 -> 15471 bytes + help/pl/pl.po | 3023 ++++++++++++++++++++++++++ + 11 files changed, 3024 insertions(+), 1 deletion(-) + +commit 9c31fc2e59c68f5bb6105eff8fc9809b34aa17af +Author: Mingcong Bai <jeffbai@aosc.xyz> +Date: Sat Oct 21 20:27:09 2017 +0800 + + Update zh_CN translation + + po/zh_CN.po | 847 ++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 430 insertions(+), 417 deletions(-) + +commit 8ac2e6bf805c5accf88495f14fa903cbb904dc86 +Author: Andre Klapper <a9016009@gmx.de> +Date: Mon Oct 9 17:40:00 2017 +0200 + + help: lv: Fix broken markup + + help/lv/lv.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 138f23209877d101494cc5965f872f54cdcc81de +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Oct 9 14:13:13 2017 +0000 + + Update Spanish translation + + help/es/es.po | 207 ++++------------------------------------------------------ + 1 file changed, 11 insertions(+), 196 deletions(-) + +commit 382503eff951270eaa833245b7ac4bf551e52d79 +Author: Ryan Schmidt <git@ryandesign.com> +Date: Mon Oct 9 02:29:16 2017 -0500 + + Fix gui tags in Spanish help translation + + Some tags weren’t updated properly when the translation was changed in + 821899157419ee7358efc70cd10200f7d60f5f61. + + https://bugzilla.gnome.org/show_bug.cgi?id=788582 + + help/es/es.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit 670d7c5b8812fff94c1309667f8563468d81dfd6 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Mon Oct 9 15:58:12 2017 +0200 + + Fix line endings in Spanish help translation + + Makes the file consistently use UNIX line endings. + + https://bugzilla.gnome.org/show_bug.cgi?id=788582 + + help/es/es.po | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 563db75bab89a8c38b25e2f240ff0377f06da010 +Author: Xavi Ivars <xavi.ivars@gmail.com> +Date: Thu Oct 5 13:34:34 2017 +0200 + + [l10n] Updated Catalan (Valencian) translation + + po/ca@valencia.po | 1742 +++++++++++++++++++++++++++++------------------------ + 1 file changed, 941 insertions(+), 801 deletions(-) + +commit 7464e4b8a3ff797ebfee43a879f8eb8198e91bfb +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 2 22:40:24 2017 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8b32d76311453ba9dabe853a3be83e03ba21a6a3 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 2 22:29:51 2017 +0200 + + Prepare release 3.26.1 + + NEWS | 22 ++++++++++++++++++++++ + 1 file changed, 22 insertions(+) + +commit 4fe287a041e660036db24d43d0b8fd54e284add1 +Author: Sveinn í Felli <sv1@fellsnet.is> +Date: Mon Oct 2 10:09:43 2017 +0000 + + Update Icelandic translation + + po/is.po | 792 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 371 insertions(+), 421 deletions(-) + +commit bde6213ee663cbc6d4e7dfd18e908b03f776c1d3 +Author: Anders Jonsson <anders.jonsson@norsjovallen.se> +Date: Sun Oct 1 21:31:36 2017 +0000 + + Update Swedish translation + + help/sv/sv.po | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +commit 74c9cf3080b0f39000b5753afa71bba93c9514a3 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sat Sep 30 15:06:25 2017 +0200 + + data: Add missing gettext-domain to gschema + + data/org.gnome.eog.gschema.xml.in | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit f63032f60b3f767889737c9994694f6cc468c014 +Author: Arash Mousavi <mousavi.arash@gmail.com> +Date: Sat Sep 30 01:03:11 2017 +0330 + + [L10N] Update Persian translation + + po/fa.po | 834 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 421 insertions(+), 413 deletions(-) + +commit ff4189a51e43081c79e26f5a7b8123180b576b80 +Author: Efstathios Iosifidis <eiosifidis@gnome.org> +Date: Mon Sep 25 14:05:33 2017 +0000 + + Update Greek translation + + po/el.po | 989 +++++++++++++++++++++++---------------------------------------- + 1 file changed, 363 insertions(+), 626 deletions(-) + +commit 652505520d362ad38b94ff961c106657c1326465 +Author: Andre Klapper <a9016009@gmx.de> +Date: Mon Sep 25 00:42:32 2017 +0200 + + Fix typo in German user docs translation + + help/de/de.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit cd9f65d4d0f727210190ccf442c5d5e6cfd669f2 +Author: Andre Klapper <a9016009@gmx.de> +Date: Sun Sep 24 23:33:57 2017 +0200 + + cs: Fix broken markup in user docs + + help/cs/cs.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 6a17972c7921b1fd30ab3e0771dab1371aaad405 +Author: Stas Solovey <whats_up@tut.by> +Date: Mon Sep 18 16:24:13 2017 +0000 + + Update Russian translation + + po/ru.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit d972f9526d951adb16a0048a7e1c1b21dcf51edc +Author: Stas Solovey <whats_up@tut.by> +Date: Mon Sep 18 16:20:26 2017 +0000 + + Update Russian translation + + po/ru.po | 722 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 363 insertions(+), 359 deletions(-) + +commit 96f5ceb07eb5635202dcdfd9bdc847140add96c3 +Author: Yuras Shumovich <shumovichy@gmail.com> +Date: Sun Sep 17 19:50:23 2017 +0000 + + Update Belarusian translation + + po/be.po | 1729 ++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 937 insertions(+), 792 deletions(-) + +commit a71af1727295d43f6d61fb5457ddda56cc136f6f +Author: hanniedu <hannie@ubuntu-nl.org> +Date: Wed Sep 13 11:59:29 2017 +0200 + + Updated Dutch translation Master 3.26 + + po/nl.po | 37 +++++++++++++++++-------------------- + 1 file changed, 17 insertions(+), 20 deletions(-) + +commit d30169b5548b548035e05b220e2844b87dc7b8cf +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 11 22:31:27 2017 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 25d5fbd0aed7e7d5f6928a27bf84c0242d0b8129 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 11 22:25:57 2017 +0200 + + Prepare release 3.26.0 + + NEWS | 16 ++++++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 18 insertions(+), 2 deletions(-) + +commit 6f9f610bb34f6721f40913979f7fe0e31c7946e1 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Mon Sep 11 15:03:07 2017 +0000 + + Update Japanese translation + + po/ja.po | 334 ++++++--------------------------------------------------------- + 1 file changed, 32 insertions(+), 302 deletions(-) + +commit 0e30ec031233c5eaaac26892fa77891cc33d94f5 +Author: Sebastian Rasmussen <sebras@gmail.com> +Date: Mon Sep 11 12:10:07 2017 +0000 + + Update Swedish translation + + help/sv/sv.po | 1048 ++++++++++++++++++++++++--------------------------------- + 1 file changed, 444 insertions(+), 604 deletions(-) + +commit dfc0f7432cf5365cb0e010df6759ec736a38239e +Author: hanniedu <hannie@ubuntu-nl.org> +Date: Mon Sep 11 12:42:11 2017 +0200 + + Updated Dutch translation Master 3.26 + + po/nl.po | 838 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 425 insertions(+), 413 deletions(-) + +commit c947ae6a36a7159278a3ab3bb5c3d2a91b84b1ae +Author: Ask Hjorth Larsen <asklarsen@gmail.com> +Date: Sun Sep 10 18:03:33 2017 +0200 + + Updated Danish translation + + po/da.po | 42 ++++++++++++++++++------------------------ + 1 file changed, 18 insertions(+), 24 deletions(-) + +commit 112b2ee456de5c604faac21882163c94fafac14a +Author: Alexander Shopov <ash@kambanaria.org> +Date: Sun Sep 10 12:16:09 2017 +0300 + + Updated Bulgarian translation + + po/bg.po | 1307 ++++++++++++++++++++++++++++++++++++++++++++++++++++---------- + 1 file changed, 1100 insertions(+), 207 deletions(-) + +commit 70d7434010e1e5ce7c35ab74bae92f693634b299 +Author: Jordi Mas <jmas@softcatala.org> +Date: Sun Sep 10 09:34:39 2017 +0200 + + Fixes to Catalan translation + + help/ca/ca.po | 2616 ++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 1569 insertions(+), 1047 deletions(-) + +commit f7198d4f7234ff972c1af8608821f771d8653a1c +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Sat Sep 9 14:29:30 2017 +0200 + + Update Basque language + + po/eu.po | 716 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 360 insertions(+), 356 deletions(-) + +commit 0b0fc1fadc27ab09724470437c337f28d991f078 +Author: Lyubomir Vasilev <lyubomirv@abv.bg> +Date: Sat Sep 9 09:55:45 2017 +0300 + + Updated Bulgarian translation + + po/bg.po | 1176 ++++++++------------------------------------------------------ + 1 file changed, 148 insertions(+), 1028 deletions(-) + +commit c6c680a679e026f7e2b8e923316d601b6bd4c663 +Author: Gábor Kelemen <kelemeng@openscope.org> +Date: Fri Sep 8 19:19:45 2017 +0000 + + Update Hungarian translation + + help/hu/hu.po | 1531 ++++++++++++++++++++++++--------------------------------- + 1 file changed, 637 insertions(+), 894 deletions(-) + +commit fb5db90a81e9dd6b55e397b7a6a79c679671b1e1 +Author: sujiniku <sujinikusityuu@gmail.com> +Date: Wed Sep 6 15:04:19 2017 +0000 + + Update Japanese translation + + po/ja.po | 900 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 494 insertions(+), 406 deletions(-) + +commit 19c3ea82de95348a5f2d6198c499eb1313fab989 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Tue Sep 5 09:13:05 2017 +0000 + + Update Italian translation + + po/it.po | 776 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 362 insertions(+), 414 deletions(-) + +commit 8f5850e04cf0e33897745691e0d672c7cfbf6ff3 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 4 22:47:15 2017 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0d554c7d0db6e423ff95fcbb72f0c57f93a4d1e8 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 4 22:16:58 2017 +0200 + + Prepare release 3.25.92 + + NEWS | 34 ++++++++++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 35 insertions(+), 1 deletion(-) + +commit bc2c8ce2c17d5c1cfe3a26c6a872080759bee61f +Author: Rafael Fontenelle <rafaelff@gnome.org> +Date: Sun Sep 3 15:09:13 2017 +0000 + + Update Brazilian Portuguese translation + + po/pt_BR.po | 718 ++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 362 insertions(+), 356 deletions(-) + +commit 420803d584ec8be95d685d1e62576bae8cc44223 +Author: Jeeyong Um <conr2d@gmail.com> +Date: Sat Sep 2 12:58:02 2017 +0000 + + Update Korean translation + + po/ko.po | 723 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 365 insertions(+), 358 deletions(-) + +commit b495b4be36e7771f32785086885b4844eb734a90 +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Sun Aug 27 22:21:12 2017 +0300 + + Update Latvian translation + + help/lv/lv.po | 316 +++++++++++++++++++++++++--------------------------------- + 1 file changed, 138 insertions(+), 178 deletions(-) + +commit 75ae42691136d69fe0c0e426450ae81db4f005fd +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Sun Aug 27 22:20:38 2017 +0300 + + Update Latvian translation + + help/lv/figures/image-view-prefs.png | Bin 0 -> 25873 bytes + help/lv/figures/multiple-convert.png | Bin 0 -> 31936 bytes + help/lv/figures/multiple-rename-count.png | Bin 0 -> 31936 bytes + help/lv/figures/plugin-send-by-mail.png | Bin 0 -> 36093 bytes + help/lv/figures/plugins-all.png | Bin 0 -> 84293 bytes + help/lv/figures/prefs-plugins-date.png | Bin 0 -> 24745 bytes + help/lv/figures/prefs-plugins-fullscreen.png | Bin 0 -> 24809 bytes + help/lv/figures/prefs-plugins.png | Bin 0 -> 24745 bytes + help/lv/figures/slideshow-prefs.png | Bin 0 -> 19602 bytes + help/lv/lv.po | 1035 ++++++++++++++++---------- + po/lv.po | 776 +++++++++---------- + 11 files changed, 987 insertions(+), 824 deletions(-) + +commit e5d34f8443f222f8d01096c160eb81eab07aac74 +Author: Cheng-Chia Tseng <pswo10680@gmail.com> +Date: Sun Aug 27 13:40:49 2017 +0000 + + Update Chinese (Taiwan) translation + + po/zh_TW.po | 759 ++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 375 insertions(+), 384 deletions(-) + +commit 75d34db51f5aa06fbd464e8b10cd3242320fe1a8 +Author: Ask Hjorth Larsen <asklarsen@gmail.com> +Date: Sat Aug 26 16:31:52 2017 +0200 + + Updated Danish translation + + po/da.po | 775 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 392 insertions(+), 383 deletions(-) + +commit b9b1974b02ffd23b70944cab6544867ebd8c7b95 +Author: gogo <trebelnik2@gmail.com> +Date: Wed Aug 23 15:42:55 2017 +0000 + + Update Croatian translation + + po/hr.po | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +commit c2adba2df5e2e4c5dda19f7f5dcf689f2ff1ecd7 +Author: Sveinn í Felli <sv1@fellsnet.is> +Date: Wed Aug 23 10:29:38 2017 +0000 + + Update Icelandic translation + + (cherry picked from commit 586031894977ff242e6daeb15f1a8f449b46cac4) + + po/is.po | 325 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 180 insertions(+), 145 deletions(-) + +commit 209323add1889554cc09f21fda016d5ff899715e +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Tue Aug 22 23:30:54 2017 +0300 + + Updated Lithuanian translation + + po/lt.po | 722 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 364 insertions(+), 358 deletions(-) + +commit f59f3ec91f16bd69222fc75432a9cf6986770c0c +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Tue Aug 22 07:13:08 2017 +0000 + + Update Spanish translation + + help/es/es.po | 72 +++++++++++++++++++++++++++++------------------------------ + 1 file changed, 36 insertions(+), 36 deletions(-) + +commit e5587fc202dbe85f294db4828e056df39cf3fbab +Author: Jordi Mas <jmas@softcatala.org> +Date: Mon Aug 21 09:02:53 2017 +0200 + + Update Catalan translation + + po/ca.po | 715 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 360 insertions(+), 355 deletions(-) + +commit 3d65cefe47ead9df9a0251e23b42a2adaacbb205 +Author: Christian Kirbach <Christian.Kirbach@gmail.com> +Date: Sun Aug 20 12:06:07 2017 +0000 + + Update German translation + + help/de/de.po | 71 ++++++++++++----------------------------------------------- + 1 file changed, 14 insertions(+), 57 deletions(-) + +commit 60acfc28a12cf33fd941be91bbd2bb3eb68419c8 +Author: Christian Kirbach <christian.kirbach@gmail.com> +Date: Sun Aug 20 14:04:12 2017 +0200 + + Updated German screen-shots + + help/de/figures/image-view-prefs.png | Bin 35103 -> 33943 bytes + help/de/figures/multiple-convert.png | Bin 27059 -> 36247 bytes + help/de/figures/multiple-rename-count.png | Bin 27167 -> 36247 bytes + help/de/figures/plugin-send-by-mail.png | Bin 60832 -> 267579 bytes + help/de/figures/plugins-all.png | Bin 63999 -> 45808 bytes + help/de/figures/prefs-plugins-date.png | Bin 29366 -> 26699 bytes + help/de/figures/prefs-plugins-fullscreen.png | Bin 29281 -> 26699 bytes + help/de/figures/prefs-plugins.png | Bin 29235 -> 26699 bytes + help/de/figures/slideshow-prefs.png | Bin 23762 -> 21672 bytes + 9 files changed, 0 insertions(+), 0 deletions(-) + +commit 23fd9a66198cbbd314333a4242aad8a39c94dd59 +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Sat Aug 19 15:34:19 2017 +0000 + + Update French translation + + po/fr.po | 714 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 359 insertions(+), 355 deletions(-) + +commit 33c75ee063601cb1ef6a3709ecff4d59bc53e670 +Author: gogo <trebelnik2@gmail.com> +Date: Fri Aug 18 20:52:33 2017 +0000 + + Update Croatian translation + + po/hr.po | 714 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 359 insertions(+), 355 deletions(-) + +commit 112286be8b98e16021b607de5fb87049591e7544 +Author: Jiri Grönroos <jiri.gronroos@iki.fi> +Date: Tue Aug 15 17:50:26 2017 +0000 + + Update Finnish translation + + po/fi.po | 722 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 364 insertions(+), 358 deletions(-) + +commit 8c04d38bc28b64dc38b564362f1ff11e1acdc59c +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Mon Aug 14 20:04:49 2017 +0200 + + Updated Serbian translation + + po/sr.po | 723 +++++++++++++++++++++++++++++---------------------------- + po/sr@latin.po | 723 +++++++++++++++++++++++++++++---------------------------- + 2 files changed, 732 insertions(+), 714 deletions(-) + +commit 821899157419ee7358efc70cd10200f7d60f5f61 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Aug 11 11:58:37 2017 +0000 + + Update Spanish translation + + help/es/es.po | 1053 ++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 596 insertions(+), 457 deletions(-) + +commit 95bd6b904393251c5a2a12dc829cc8f0887b8b73 +Author: Marek Cernocky <marek_cernocky@conel.cz> +Date: Fri Aug 11 10:59:38 2017 +0200 + + Updated Czech translation + + help/cs/cs.po | 153 +++++++++++++++++++++++++++++----------------------------- + 1 file changed, 76 insertions(+), 77 deletions(-) + +commit 804f605874129187f9700f8bf7c687aa4be2aca5 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Fri Aug 11 01:31:43 2017 +0200 + + Update Polish translation + + po/pl.po | 737 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 371 insertions(+), 366 deletions(-) + +commit c4d7ad90e8d6f9bc0235e177c89324e6da021104 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Aug 10 22:01:02 2017 +0200 + + docs: Improve compression of screenshots in documentation + + help/C/figures/image-view-prefs.png | Bin 32433 -> 23552 bytes + help/C/figures/multiple-convert.png | Bin 31895 -> 24376 bytes + help/C/figures/multiple-rename-count.png | Bin 31503 -> 24052 bytes + help/C/figures/plugin-send-by-mail.png | Bin 191185 -> 159940 bytes + help/C/figures/plugins-all.png | Bin 97608 -> 70229 bytes + help/C/figures/prefs-plugins-date.png | Bin 27821 -> 20448 bytes + help/C/figures/prefs-plugins-fullscreen.png | Bin 27774 -> 20424 bytes + help/C/figures/prefs-plugins.png | Bin 27959 -> 19979 bytes + help/C/figures/slideshow-prefs.png | Bin 21607 -> 15367 bytes + 9 files changed, 0 insertions(+), 0 deletions(-) + +commit ab6f705fe6aa2d4e5b0a80d2ce4a3d55a5c56178 +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Thu Aug 10 19:14:31 2017 +0000 + + Update German translation + + help/de/de.po | 802 +++++++++++++++++++++++++--------------------------------- + 1 file changed, 338 insertions(+), 464 deletions(-) + +commit 26dc7afed657e0820854dcc178abc53320b90c86 +Author: Marek Cernocky <marek_cernocky@conel.cz> +Date: Thu Aug 10 16:16:45 2017 +0200 + + Updated Czech translation + + help/cs/cs.po | 739 ++++++++++++++++++++++------------------------------------ + 1 file changed, 285 insertions(+), 454 deletions(-) + +commit f69bfd9fb3521c82776cf288491ee468d2c5c94f +Author: Fran Dieguez <frandieguez@gnome.org> +Date: Tue Aug 8 22:02:53 2017 +0000 + + Update Galician translation + + po/gl.po | 786 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 367 insertions(+), 419 deletions(-) + +commit eec19cc037d444960f62004702514bdc7648e250 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:32:35 2017 +0200 + + User docs: Cover 100% zoom keyboard shortcuts (bug 759434) + + help/C/zoom.page | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +commit a3118bf99502910234d9388ed2300d2c0f8c5451 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:26:18 2017 +0200 + + User docs: Remove outdated instructions also from page title + + help/C/edit.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ab3cdeae041e4d992a94e17e36bdc9a39dcbe044 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:25:04 2017 +0200 + + User docs: Update instructions where/how to find menu item in UI + + help/C/edit.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 86497053896961b3c7651d54c336c61d045e1596 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:24:31 2017 +0200 + + User docs: Update instructions where/how to find menu item in UI + + help/C/format-change.page | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 3a1dcf242db0b0b0f5c44f9ac09fa19a3391f1dc +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:23:08 2017 +0200 + + User docs: Update instructions where/how to find menu item in UI + + help/C/open.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8fd622f854ee85a30b8348f641c659f2b1eeea55 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:22:43 2017 +0200 + + User docs: Update instructions where/how to find menu item in UI + + help/C/print.page | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 540f5c5083f99fbfdd0269c336b02976de162926 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:21:56 2017 +0200 + + User docs: Remove outdated instructions also from page title + + help/C/slideshow.page | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit c67be75f2b625f53fa926334111e6f9fc6a62e90 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:21:04 2017 +0200 + + User docs: Remove outdated instructions also from page title + + help/C/zoom.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 25f7251a626517c01e42901c663bbdd917a15be6 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:20:29 2017 +0200 + + User docs: Update instructions where/how to find menu item in UI + + help/C/desktop-background.page | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +commit 124353100ef9d8bfd04372696536f68d3770484f +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:19:40 2017 +0200 + + User docs: Update instructions where/how to find menu item in UI + + help/C/rename-multiple.page | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit a11528e5bf9cf30f82adb43a9b88c5bd9f64106b +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:16:06 2017 +0200 + + User docs: Update steps how to delete an opened image + + help/C/edit.page | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +commit 14216a9cde5b65379d0f4eb510b823ff0c745063 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:15:22 2017 +0200 + + User docs: Update steps how to copy an opened image + + help/C/copy-paste.page | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +commit 69a8f7169e9d07b2b01b51066612ba264ea7c04a +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:13:46 2017 +0200 + + User docs: Remove 'Edit > Preferences' and update to title bar + + help/C/plugin-exif-digital.page | 34 ++++++++++++++---------------- + help/C/plugin-fullscreen-background.page | 12 +++++++---- + help/C/plugin-fullscreen-double-click.page | 8 +++---- + help/C/plugin-picasa.page | 15 +++++++------ + help/C/plugin-python-console.page | 13 ++++++------ + help/C/plugin-send-by-mail.page | 10 ++++----- + help/C/plugin-slideshow-shuffle.page | 8 +++---- + help/C/plugin-zoom-width.page | 8 +++---- + help/C/preferences.page | 4 ++-- + 9 files changed, 59 insertions(+), 53 deletions(-) + +commit 57db3502cdbd411fe1654bdacf7a9a0429b83cfd +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 20:11:52 2017 +0200 + + User docs: Remove stray reference to removed toolbar.page + + help/C/zoom.page | 1 - + 1 file changed, 1 deletion(-) + +commit ae2293cef012ab32ce165890afacfa71572beac3 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 19:52:25 2017 +0200 + + User docs: Remove toolbar.page (functionality was removed in bug 740426) + + help/C/toolbar.page | 62 ----------------------------------------------------- + help/Makefile.am | 1 - + 2 files changed, 63 deletions(-) + +commit fb36ddf33f5d812e9d0cac29892aafc2dcbdb71c +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 19:50:41 2017 +0200 + + User docs: Remove eog-toolbar-editor.png from Makefile.am to fix the build + + help/Makefile.am | 1 - + 1 file changed, 1 deletion(-) + +commit 3256f298a9630dd73bd07bfab9d504183936cd82 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 19:49:40 2017 +0200 + + User docs: Remove references to tool bar, update instructions to the UI + + help/C/zoom.page | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +commit 5472e76ab6058deadb14f3c729c8c76b986b22f0 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 19:45:32 2017 +0200 + + User docs: Remove references to tool bar, update instructions to the UI + + help/C/view.page | 22 ++++++++++------------ + 1 file changed, 10 insertions(+), 12 deletions(-) + +commit 7f6b36e0c7e0eeb996e5bfb2143bc0fcd1179845 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 19:41:19 2017 +0200 + + User docs: Adjust instructions how to rotate to the UI overlay buttons + + help/C/flip-rotate.page | 13 ++++++------- + 1 file changed, 6 insertions(+), 7 deletions(-) + +commit a902d569a48ea90c3e2c8f07564bb4c608094727 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 19:34:38 2017 +0200 + + User docs: Remove outdated reference to toolbar (removed in bug 740426) + + help/C/flip-rotate.page | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +commit 0d4feca695936905c3de5cae40ace334bad79fc6 +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 19:33:55 2017 +0200 + + User docs: Add comment that doc is wrong due to bug 786012 + + help/C/flip-rotate.page | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +commit c4976b26c870fd629a43be5466fda3d2f9363d4e +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 19:19:34 2017 +0200 + + User docs: Remove Toolbar Editor screenshot + + Offers no additional info not already in the (outdated) help text. + + help/C/figures/eog-toolbar-editor.png | Bin 27416 -> 0 bytes + help/C/toolbar.page | 3 --- + 2 files changed, 3 deletions(-) + +commit 385490835d644a78ca349de408cd517ddcc9ec5b +Author: Andre Klapper <a9016009@gmx.de> +Date: Tue Aug 8 19:18:59 2017 +0200 + + User docs: Update old screenshots to reflect 3.24 UI + + help/C/figures/image-view-prefs.png | Bin 33011 -> 32433 bytes + help/C/figures/multiple-convert.png | Bin 30781 -> 31895 bytes + help/C/figures/multiple-rename-count.png | Bin 30254 -> 31503 bytes + help/C/figures/plugin-send-by-mail.png | Bin 62863 -> 191185 bytes + help/C/figures/plugins-all.png | Bin 90830 -> 97608 bytes + help/C/figures/prefs-plugins-date.png | Bin 29982 -> 27821 bytes + help/C/figures/prefs-plugins-fullscreen.png | Bin 30013 -> 27774 bytes + help/C/figures/prefs-plugins.png | Bin 28441 -> 27959 bytes + help/C/figures/slideshow-prefs.png | Bin 22467 -> 21607 bytes + 9 files changed, 0 insertions(+), 0 deletions(-) + +commit 22d60947e5ce6c192c8b9b30c234679a402f6e76 +Author: Marek Cernocky <marek_cernocky@conel.cz> +Date: Tue Aug 8 11:15:09 2017 +0200 + + Updated Czech translation + + help/cs/cs.po | 337 +++++++++++++++++++++++++++++----------------------------- + 1 file changed, 168 insertions(+), 169 deletions(-) + +commit 56f6929e7cbd942790f7a2f49a08106d60348b72 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 7 21:33:13 2017 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 7b4f3e7f9156bb0ce55d8ae57141399b312d4d53 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 7 21:26:35 2017 +0200 + + Prepare release 3.25.90 + + NEWS | 27 +++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 28 insertions(+), 1 deletion(-) + +commit 0e7749ba0bfac7e72c19841afcbebb10851533b4 +Author: Bastien Nocera <hadess@hadess.net> +Date: Fri Jul 14 11:41:38 2017 +0200 + + thumbnail: Remove use of obsolete gnome-desktop-thumbnail helper + + gnome_desktop_thumbnail_scale_down_pixbuf() is obsolete now that + gdk-pixbuf doesn't have the same bugs when shrinking images by large + factors. + + https://bugzilla.gnome.org/show_bug.cgi?id=784942 + + configure.ac | 2 +- + src/eog-thumbnail.c | 9 +++++---- + 2 files changed, 6 insertions(+), 5 deletions(-) + +commit 5b7b7f7b241b8874f79d5340e2912ce980153e6b +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Aug 7 10:32:49 2017 +0000 + + Update Spanish translation + + help/es/es.po | 74 +++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 49 insertions(+), 25 deletions(-) + +commit e942f41798d64791b73b3bd21aaa2950be38f26b +Author: Balasankar C <c.balasankar@gmail.com> +Date: Sat Aug 5 20:43:52 2017 +0000 + + Update Malayalam translation + + po/ml.po | 1999 +++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 1080 insertions(+), 919 deletions(-) + +commit 533682353453943980d7ca29a89b079bcdfc8dfc +Author: Andre Klapper <a9016009@gmx.de> +Date: Sat Aug 5 15:19:58 2017 +0200 + + User docs: Use https links + + help/C/develop.page | 2 +- + help/C/documentation.page | 4 ++-- + help/C/translate.page | 6 +++--- + 3 files changed, 6 insertions(+), 6 deletions(-) + +commit 40b391fd61ef1ff9024a98035ac5b9b0065b39af +Author: Anders Jonsson <anders.jonsson@norsjovallen.se> +Date: Sat Aug 5 09:57:21 2017 +0000 + + Update Swedish translation + + po/sv.po | 718 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 362 insertions(+), 356 deletions(-) + +commit 9dacff2cd1aa5928da2561361091ecd96d84e2cc +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sat Aug 5 11:49:12 2017 +0200 + + Updated Spanish translation + + help/es/es.po | 296 +++++++++++++++++++++++++++++----------------------------- + 1 file changed, 149 insertions(+), 147 deletions(-) + +commit 29c2b6727923a3707f4952f2553472e0dd20ed96 +Author: Balázs Meskó <meskobalazs@fedoraproject.org> +Date: Fri Aug 4 13:32:37 2017 +0000 + + Update Hungarian translation + + po/hu.po | 720 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 363 insertions(+), 357 deletions(-) + +commit 84b8e0406a233044a6b33d292e624deeb9f2fe94 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Wed Aug 2 10:26:10 2017 +0200 + + Updated Slovenian translation + + po/sl.po | 846 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 432 insertions(+), 414 deletions(-) + +commit 6c361a3dde0f2bc2324efc4802b0a647c870b9ed +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Tue Aug 1 20:55:15 2017 +0000 + + Update German translation + + help/de/de.po | 367 ++++++++++++++++++++++------------------------------------ + 1 file changed, 137 insertions(+), 230 deletions(-) + +commit 81c3d8f55a2eed1edb57691613a0597edc42e36c +Author: Anders Jonsson <anders.jonsson@norsjovallen.se> +Date: Mon Jul 31 23:22:40 2017 +0000 + + Update Swedish translation + + help/sv/sv.po | 287 +++++++++++++++++++++++++++++----------------------------- + 1 file changed, 144 insertions(+), 143 deletions(-) + +commit bc6c51751579c00ba7bfc4238e7ea237e70c0a01 +Author: Marek Cernocky <marek_cernocky@conel.cz> +Date: Mon Jul 31 15:49:06 2017 +0200 + + Updated Czech translation + + po/cs.po | 743 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 360 insertions(+), 383 deletions(-) + +commit d81f76373aa7f3f5d3b1f4c933aee0b8c7ee7b9f +Author: Anders Jonsson <anders.jonsson@norsjovallen.se> +Date: Fri Jul 1 02:13:06 2016 +0200 + + Fix Bugzilla submit bug button text + + https://bugzilla.gnome.org/show_bug.cgi?id=767264#c2 + + help/C/bug-filing.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d77e2c06e9f7e2ea217c639622f1b51763d912d6 +Author: Çağatay Yiğit Şahin <cyigitsahin@outlook.com> +Date: Fri Jul 28 09:58:47 2017 +0000 + + Update Turkish translation + + po/tr.po | 781 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 365 insertions(+), 416 deletions(-) + +commit 3ef0fad6ab410f44194c9492e26f72984a36adcc +Author: Dušan Kazik <prescott66@gmail.com> +Date: Thu Jul 13 18:29:00 2017 +0000 + + Update Slovak translation + + po/sk.po | 720 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 363 insertions(+), 357 deletions(-) + +commit d568760395ec72e6e9da7a17eae00989aebbd21d +Author: Trần Ngọc Quân <vnwildman@gmail.com> +Date: Fri Jun 30 15:12:52 2017 +0700 + + Updated Vietnamese translation + + Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com> + + po/vi.po | 714 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 359 insertions(+), 355 deletions(-) + +commit 702d70c28754f3b71b72584c27da19df914a020c +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Sat Jun 24 01:08:33 2017 +0200 + + Update Arabic translation + + po/ar.po | 836 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 425 insertions(+), 411 deletions(-) + +commit 867c3fd178840c1c8bdc83aa26d7a536d9fc5488 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 19 23:31:34 2017 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 53825ebbf52c2e42549975de3e746ed0461a33fa +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 19 23:23:43 2017 +0200 + + Prepare release 3.25.1 + + NEWS | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +commit f59aded11956056431c04f88a55af4dde5e504a0 +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Sat Jun 17 11:53:22 2017 +0000 + + Update Kazakh translation + + po/kk.po | 716 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 359 insertions(+), 357 deletions(-) + +commit a40f9e91992c5ce9c37cc531dc0d807c4c516191 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jun 8 08:11:27 2017 +0000 + + Update German translation + + po/de.po | 721 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 362 insertions(+), 359 deletions(-) + +commit 0503e50bd31975f0f2d12943bf51e4360f2bdf0e +Author: Kukuh Syafaat <syafaatkukuh@gmail.com> +Date: Wed Jun 7 05:16:43 2017 +0000 + + Update Indonesian translation + + po/id.po | 710 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 355 insertions(+), 355 deletions(-) + +commit b3bcb53d89c7844bfb19bb26e5367dacf6198bf0 +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Tue Jun 6 16:03:41 2017 +0000 + + Update Friulian translation + + po/fur.po | 714 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 358 insertions(+), 356 deletions(-) + +commit 8b572596ad841016617a19000f29b31244de90a3 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Jun 5 14:09:17 2017 +0000 + + Update Spanish translation + + po/es.po | 714 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 358 insertions(+), 356 deletions(-) + +commit 6c073edc5645c4263fedf91b305b04ca4cda2948 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 4 20:07:15 2017 +0200 + + fullscreen: reload: Add translator comment to Icon keyword + + gettext also makes the Icon value translatable. + Tell translators that this value is actually an icon (file) name. + + plugins/fullscreen/fullscreen.plugin.desktop.in | 2 ++ + plugins/reload/reload.plugin.desktop.in | 2 ++ + 2 files changed, 4 insertions(+) + +commit beb99cfda1bfd9097e7b2ca3ec4d3950cb2b13b8 +Author: Ondrej Holy <oholy@redhat.com> +Date: Mon May 15 10:27:03 2017 +0200 + + EogJobs: Try to mount volume if not already mounted + + It may happen for various reasons that somebody tries to open a + location, which is not already mounted. Consequently, "No images + found in '[location]'." error is shown to the user currently. Let's + try to mount the volume in such case instead of showing the error. + + https://bugzilla.gnome.org/show_bug.cgi?id=555831 + + src/eog-jobs.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 70 insertions(+), 1 deletion(-) + +commit 0c97d1c7da1af7e6dfd4f822fcf3363a1ae79ff0 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 4 16:20:36 2017 +0200 + + Update git.mk to recognize the gettext .m4s + + Revision d6caf0d1 from https://github.com/behdad/git.mk + + Makefile.am | 13 ++++--------- + git.mk | 41 +++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 45 insertions(+), 9 deletions(-) + +commit cda433d5a9020074156f16a86148d09121249f67 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 4 13:16:25 2017 +0200 + + Convert from intltool to gettext + + See https://wiki.gnome.org/Initiatives/GnomeGoals/GettextMigration + + Makefile.am | 7 +- + autogen.sh | 1 - + configure.ac | 6 +- + data/Makefile.am | 16 +++-- + data/{eog-app-menu.xml => eog-app-menu.ui} | 0 + data/eog.appdata.xml.in | 12 ++-- + data/eog.desktop.in.in | 11 ++- + plugins/Makefile.am | 8 ++- + plugins/fullscreen/fullscreen.plugin.desktop.in | 4 +- + plugins/reload/reload.plugin.desktop.in | 4 +- + .../statusbar-date.plugin.desktop.in | 4 +- + po/Makevars | 78 ++++++++++++++++++++++ + po/POTFILES.in | 23 +++---- + src/eog.gresource.xml | 2 +- + 14 files changed, 133 insertions(+), 43 deletions(-) + +commit 79ebfbc0a9a47c218d0c1df7d66bdb216c3f909f +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 4 16:21:22 2017 +0200 + + Post-branch version bump + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 4d00c81c002331cac5ed1c7fa690c7bce25bc3de +Author: Emin Tufan Çetin <etcetin@gmail.com> +Date: Fri May 19 18:48:31 2017 +0000 + + Update Turkish translation + + po/tr.po | 413 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 225 insertions(+), 188 deletions(-) + +commit bd591759568444f2b79e360b00e7a27a1bbbb80d +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Fri May 5 15:57:18 2017 +0000 + + Update Friulian translation + + po/fur.po | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 98b51943f64a366c06906eb8d70115d81e21b7bb +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Fri May 5 15:54:58 2017 +0000 + + Update Friulian translation + + po/fur.po | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +commit aa3162566b9b661bd254a1414ceff30357f41926 +Author: Stas Solovey <whats_up@tut.by> +Date: Thu Apr 13 11:47:31 2017 +0000 + + Update Russian translation + + po/ru.po | 16 +++++++--------- + 1 file changed, 7 insertions(+), 9 deletions(-) + +commit 5a71efaffe7338891e0a88d6ec023841b243cee4 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 10 20:48:12 2017 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c665b86c19cec9e9ec783adb062c387ddb46958c +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 10 20:43:33 2017 +0200 + + Prepare release 3.24.1 + + NEWS | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + +commit d91cf5bc7f712d36fbc6dfb1b73130ea489931b1 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Mar 29 20:56:11 2017 +0200 + + EogExifUtil: Fix build with older GCCs + + Older GCCs don't support pragma diagnostic in functions. + Move the pragmas outside to fix the build with these compilers. + + https://bugzilla.gnome.org/show_bug.cgi?id=780675 + + src/eog-exif-util.c | 16 ++++++++++------ + 1 file changed, 10 insertions(+), 6 deletions(-) + +commit 24d7db48431ebc8e9dd1afdbebe66b539706fc96 +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Sun Apr 9 14:28:52 2017 +0300 + + Update Latvian translation + + help/lv/lv.po | 718 ++++++++++++++++++++++++---------------------------------- + 1 file changed, 297 insertions(+), 421 deletions(-) + +commit 484d54db73f022692fb5250c2bf184db70d05ab8 +Author: gogo <trebelnik2@gmail.com> +Date: Sat Apr 8 19:42:29 2017 +0000 + + Update Croatian translation + + po/hr.po | 377 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 171 insertions(+), 206 deletions(-) + +commit 52803fb8572d51b9744ef860f171e8430b21ac10 +Author: Tom Tryfonidis <tomtryf@gnome.org> +Date: Sat Apr 8 18:20:38 2017 +0000 + + Update Greek translation + + po/el.po | 254 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 132 insertions(+), 122 deletions(-) + +commit 2dbb5c7211923a0377115c596a8a0c4168208c2b +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sat Mar 25 12:09:28 2017 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 52 +++++++++++----------------------------------------- + 1 file changed, 11 insertions(+), 41 deletions(-) + +commit 1251f8bd81350d72e2c8a5f26822929709b7412e +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Wed Mar 22 09:10:41 2017 +0000 + + Update Spanish translation + + po/es.po | 79 ++++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 37 insertions(+), 42 deletions(-) + +commit 51524cd4ef14bb1556ebb0e255bb2f126272aa43 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 20 20:09:47 2017 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ffec937c4cb0fce2f5228199327be45a0a66f614 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 20 20:05:24 2017 +0100 + + Prepare release 3.24.0 + + NEWS | 12 ++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 14 insertions(+), 2 deletions(-) + +commit f3ecddd16cf203c7cac84cc1a5d0408038099583 +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Mon Mar 20 13:47:42 2017 +0200 + + Updated Ukrainian translation + + po/uk.po | 79 +++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 38 insertions(+), 41 deletions(-) + +commit a1d6b2cbbba53af2d490661f562a6ce4cadd8334 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Sun Mar 19 15:21:20 2017 +0000 + + Update Italian translation + + po/it.po | 297 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 181 insertions(+), 116 deletions(-) + +commit e530a9f0872a324fc0996d39770b77cba6bec9e8 +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Sat Mar 18 10:51:18 2017 +0200 + + Update Latvian translation + + po/lv.po | 280 +++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 174 insertions(+), 106 deletions(-) + +commit a806abef0a253d393576bb64a655c7aa9e59eab7 +Author: Changwoo Ryu <cwryu@debian.org> +Date: Thu Mar 16 15:05:56 2017 +0000 + + Update Korean translation + + po/ko.po | 247 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 124 insertions(+), 123 deletions(-) + +commit 3434cfe699967bd7146746952a4246007a17420c +Author: gogo <trebelnik2@gmail.com> +Date: Wed Mar 15 19:42:41 2017 +0000 + + Update Croatian translation + + po/hr.po | 409 ++++++++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 284 insertions(+), 125 deletions(-) + +commit b6f1a5c63c0af17a4a5585c9ef046fd555d951fa +Author: Yuri Myasoedov <ymyasoedov@yandex.ru> +Date: Tue Mar 14 23:21:01 2017 +0400 + + Updated Russian translation + + po/ru.po | 251 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 116 insertions(+), 135 deletions(-) + +commit 8bd03cec68ade18227f2ba9a97da7d181304f508 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 13 21:30:11 2017 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 3db22803e49f4dc68ca82e8e9154d62cdee089e3 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 13 21:26:33 2017 +0100 + + Prepare release 3.23.92 + + NEWS | 28 ++++++++++++++++++++++++++++ + 1 file changed, 28 insertions(+) + +commit 88f9be0b2f7790c1223cfecfc2026247e5e924c4 +Author: Dušan Kazik <prescott66@gmail.com> +Date: Sun Mar 12 09:47:31 2017 +0000 + + Update Slovak translation + + po/sk.po | 79 +++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 38 insertions(+), 41 deletions(-) + +commit 372d5570a04269416513238610ab39e23e4ecdf2 +Author: Jordi Mas <jmas@softcatala.org> +Date: Sun Mar 12 08:52:59 2017 +0100 + + Update Catalan translation + + po/ca.po | 109 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 60 insertions(+), 49 deletions(-) + +commit 0bb420f15597e94fa0b293846709e14f5adb42eb +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Sun Mar 12 07:55:07 2017 +0100 + + Updated Serbian translation + + po/sr.po | 139 ++++++++++++++++----------------------------------------- + po/sr@latin.po | 139 ++++++++++++++++----------------------------------------- + 2 files changed, 78 insertions(+), 200 deletions(-) + +commit 8c4fa1c1d4e0ce60d0695a2dadc7f56410bb8eec +Author: A S Alam <aalam@users.sf.net> +Date: Sat Mar 11 10:31:56 2017 -0600 + + updated Punjabi Translation + + po/pa.po | 866 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 549 insertions(+), 317 deletions(-) + +commit 3f604abf8996d7323c154917aefbe5377b73d751 +Author: Kukuh Syafaat <syafaatkukuh@gmail.com> +Date: Sat Mar 11 15:29:25 2017 +0000 + + Update Indonesian translation + + po/id.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit ccbc8b4f669b44772d3ff48e2241e63377c49f45 +Author: Fran Dieguez <frandieguez@gnome.org> +Date: Sat Mar 11 03:04:19 2017 +0000 + + Update Galician translation + + po/gl.po | 282 +++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 176 insertions(+), 106 deletions(-) + +commit 326a85c1b428029a5ea862d88668a4bc2c47f6c7 +Author: Gábor Kelemen <kelemeng@openscope.org> +Date: Thu Mar 9 22:27:04 2017 +0000 + + Update Hungarian translation + + po/hu.po | 81 +++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 39 insertions(+), 42 deletions(-) + +commit 39bde629df8f8d9a7dc76c1e8e258eaafa2e6540 +Author: Marek Cernocky <marek_cernocky@conel.cz> +Date: Wed Mar 8 17:07:41 2017 +0100 + + Updated Czech translation + + po/cs.po | 79 +++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 38 insertions(+), 41 deletions(-) + +commit eaac82b1616552b40821f7bb97dc85fe85121e37 +Author: Joe Hansen <joedalton2@yahoo.dk> +Date: Tue Mar 7 14:33:57 2017 +0100 + + Updated Danish translation + + po/da.po | 140 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 73 insertions(+), 67 deletions(-) + +commit 2b61673a8b3662daaff0582bf61de9c594dcf279 +Author: Trần Ngọc Quân <vnwildman@gmail.com> +Date: Mon Mar 6 07:28:22 2017 +0700 + + Updated Vietnamese translation + + Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com> + + po/vi.po | 234 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 122 insertions(+), 112 deletions(-) + +commit b329a6d1ae1079eabc52edef0d26f18c2ed55de4 +Author: Kukuh Syafaat <syafaatkukuh@gmail.com> +Date: Sun Mar 5 09:39:45 2017 +0000 + + Update Indonesian translation + + po/id.po | 75 +++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 36 insertions(+), 39 deletions(-) + +commit b66b0d304b2799faf385395a8b24c9de6a467f21 +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Sat Mar 4 18:43:54 2017 +0200 + + Updated Lithuanian translation + + po/lt.po | 232 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 121 insertions(+), 111 deletions(-) + +commit 73fda63aba499f0a7993a25d45cf8ab60b298823 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Thu Mar 2 19:22:36 2017 +0100 + + Update Basque language + + po/eu.po | 139 ++++++++++++++++++--------------------------------------------- + 1 file changed, 39 insertions(+), 100 deletions(-) + +commit c8619f2751d5bed353f65ef1124ec3bb7067ff30 +Author: Charles Monzat <superboa@hotmail.fr> +Date: Thu Mar 2 12:07:57 2017 +0000 + + Update French translation + + po/fr.po | 137 ++++++++++++++++++--------------------------------------------- + 1 file changed, 38 insertions(+), 99 deletions(-) + +commit d2262fad5ebb9dad3e3410c4b5adeebf9864d860 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Thu Mar 2 01:55:28 2017 +0100 + + Update Polish translation + + po/pl.po | 48 +++++++++--------------------------------------- + 1 file changed, 9 insertions(+), 39 deletions(-) + +commit 8d54c267f0c6098d12a84ce11d60aa9ebbc3cee9 +Author: Anders Jonsson <anders.jonsson@norsjovallen.se> +Date: Wed Mar 1 11:56:01 2017 +0000 + + Update Swedish translation + + po/sv.po | 251 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 144 insertions(+), 107 deletions(-) + +commit 62f87e956ea863415b7c4d38fbdc6cb1daecde1a +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Wed Mar 1 11:07:26 2017 +0000 + + Update Kazakh translation + + po/kk.po | 77 +++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 37 insertions(+), 40 deletions(-) + +commit 5fd19201d1aab6b43994089b91f8161f4687f347 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Wed Mar 1 00:51:27 2017 +0000 + + Update Chinese (Taiwan) translation + + po/zh_TW.po | 79 +++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 38 insertions(+), 41 deletions(-) + +commit ffb34796ec2f04412e8f8fc6dac11a477ac7c7af +Author: Rafael Fontenelle <rafaelff@gnome.org> +Date: Tue Feb 28 21:16:32 2017 +0000 + + Update Brazilian Portuguese translation + + po/pt_BR.po | 77 +++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 36 insertions(+), 41 deletions(-) + +commit f7adf3b1e267c971bd4fb7e7e2aec46e2089a1ab +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Tue Feb 28 20:22:04 2017 +0000 + + Update Friulian translation + + po/fur.po | 75 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 36 insertions(+), 39 deletions(-) + +commit 75323a5e1e444541a21bf3b144422a966448db7c +Author: Jiri Grönroos <jiri.gronroos@iki.fi> +Date: Tue Feb 28 19:04:10 2017 +0000 + + Update Finnish translation + + po/fi.po | 79 ++++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 37 insertions(+), 42 deletions(-) + +commit 7e8be87330334d9d16763c18f2bed96d6b676661 +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Tue Feb 28 17:37:40 2017 +0000 + + Update German translation + + po/de.po | 114 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 62 insertions(+), 52 deletions(-) + +commit ea537966f41e322047b968c0d98da40817fb39d3 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 27 23:19:43 2017 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 57b197d660f1deb0a400b6894a61b298621f90dd +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 27 23:16:29 2017 +0100 + + Prepare release 3.23.91 + + NEWS | 33 +++++++++++++++++++++++++++++++++ + 1 file changed, 33 insertions(+) + +commit fbe623dbc8c12ef7244e5b39bec90ba1b9afd656 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 27 23:02:35 2017 +0100 + + EogZoomEntry: Fix translator comment picked up by gtk-doc + + src/eog-zoom-entry.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d487d38bb117bbbe63f286e56f105d2ad6902018 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 27 23:01:53 2017 +0100 + + EogZoomEntry: Allow whitespace between digits and percent sign + + This should make entering number easier if the displayed + text already contains a space. + + src/eog-zoom-entry.c | 13 +++++++++---- + 1 file changed, 9 insertions(+), 4 deletions(-) + +commit 69f2e329611f417057e115250c8608f9fc0cb009 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 27 20:03:01 2017 +0100 + + EogZoomEntry: Make zoom format string translatable + + Turns out the zoom value on the statusbar is translated + so this one needs to be translatable as well. + + src/eog-zoom-entry.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +commit 189dc493699e7e5a3a680a3f1e66b3aef58cd2a7 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 27 20:00:14 2017 +0100 + + EogZoomEntry: Remove unused translated text + + data/eog-zoom-entry.ui | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d6bc711ba7f7b00387843ebb7ed72d8aad83f073 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 26 18:02:07 2017 +0100 + + EogZoomEntry: Generate the menu entries at runtime + + This ensures the values listed match what is displayed after + selecting a zoom level. + + src/eog-zoom-entry.c | 51 +++++++++++++++++++++++++-------------------------- + 1 file changed, 25 insertions(+), 26 deletions(-) + +commit fcf9caf9c119a1b1787340681781518120f7821f +Author: Balázs Meskó <meskobalazs@fedoraproject.org> +Date: Sun Feb 26 11:41:22 2017 +0000 + + Update Hungarian translation + + po/hu.po | 140 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 90 insertions(+), 50 deletions(-) + +commit f0052c1c29832cf7a3fda33ca5289625aeb770d1 +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Sun Feb 26 07:40:35 2017 +0100 + + Updated Serbian translation + + po/sr.po | 320 ++++++++++++++++++++++++++++++++++++-------------------- + po/sr@latin.po | 322 +++++++++++++++++++++++++++++++++++++-------------------- + 2 files changed, 415 insertions(+), 227 deletions(-) + +commit 209ad1516ce8cbfdc5c3890dbc9ead688c21aca8 +Author: Rafael Fontenelle <rafaelff@gnome.org> +Date: Sat Feb 25 21:52:39 2017 +0000 + + Update Brazilian Portuguese translation + + po/pt_BR.po | 204 ++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 95 insertions(+), 109 deletions(-) + +commit db92245ac67599ca052452e124b3e4b3a3b0fad4 +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Fri Feb 24 15:37:05 2017 +0000 + + Update Friulian translation + + po/fur.po | 198 +++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 91 insertions(+), 107 deletions(-) + +commit 3adeb4923458e4480830c00ad8f69c481b30944d +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Thu Feb 23 12:22:41 2017 +0000 + + Update French translation + + po/fr.po | 309 +++++++++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 204 insertions(+), 105 deletions(-) + +commit ac4bc3a062f8538d0dbaa84b86a21ce6817f5205 +Author: Jordi Mas <jmas@softcatala.org> +Date: Wed Feb 22 21:18:50 2017 +0100 + + Fix Catalan translation + + help/ca/ca.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit e7f8392d979400a41e83aecf3585f885051f17f0 +Author: Kukuh Syafaat <syafaatkukuh@gmail.com> +Date: Wed Feb 22 14:56:48 2017 +0000 + + Update Indonesian translation + + po/id.po | 168 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 91 insertions(+), 77 deletions(-) + +commit 23916b23e2481899108ef3430ae335ae91562cab +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Wed Feb 22 01:28:55 2017 +0000 + + Update Chinese (Taiwan) translation + + po/zh_TW.po | 495 +++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 270 insertions(+), 225 deletions(-) + +commit ba5ddbd8f866298f15cd14c09026d1e1219930b9 +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Tue Feb 21 11:35:51 2017 +0200 + + Updated Ukrainian translation + + po/uk.po | 269 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 153 insertions(+), 116 deletions(-) + +commit 77bc85ae4931868daa04e87174585d72bbc8baa9 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sun Feb 19 21:55:48 2017 +0100 + + Update Polish translation + + po/pl.po | 145 +++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 91 insertions(+), 54 deletions(-) + +commit af13e9c4a3eca34fceb0079f6e3bab9f122c0a3e +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sat Feb 18 10:48:48 2017 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 149 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 96 insertions(+), 53 deletions(-) + +commit a5dc33bcb39d8730e9f14de2fd4a66665b5274f8 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sat Feb 18 10:40:47 2017 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 8 +++----- + 1 file changed, 3 insertions(+), 5 deletions(-) + +commit 27799730a1f02e59f544286fc0760a2d6be93d01 +Author: Dušan Kazik <prescott66@gmail.com> +Date: Sat Feb 18 09:31:19 2017 +0000 + + Update Slovak translation + + po/sk.po | 144 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 92 insertions(+), 52 deletions(-) + +commit bb3a2d2058ea79ee7caa051971dd5f8ac2b6ac70 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Thu Feb 16 17:14:14 2017 +0100 + + Update Basque language + + po/eu.po | 341 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 220 insertions(+), 121 deletions(-) + +commit 97b32ec581fdd3861da931f8e3a0791ca262b512 +Author: Ask Hjorth Larsen <asklarsen@gmail.com> +Date: Thu Feb 16 14:11:38 2017 +0100 + + Updated Danish translation + + po/da.po | 159 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 81 insertions(+), 78 deletions(-) + +commit 4a0470aa93e9d06be1d62967224d5e4944468896 +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Thu Feb 16 08:20:03 2017 +0000 + + Update Kazakh translation + + po/kk.po | 146 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 93 insertions(+), 53 deletions(-) + +commit 788ec755964bddc5cea58f2a7ab45569d28afb94 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 15 20:33:05 2017 +0100 + + EogZoomEntry: Disable the entry if no zooming is possible + + src/eog-zoom-entry.c | 36 ++++++++++++++++++++++++++++++++++-- + 1 file changed, 34 insertions(+), 2 deletions(-) + +commit 695f5e302caebcb7c659572c7a35feb822ba26bc +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 15 20:26:40 2017 +0100 + + EogZoomEntry: Ensure the initial zoom value is correct + + src/eog-zoom-entry.c | 1 + + 1 file changed, 1 insertion(+) + +commit 0af0e656c523503dc5454414429c8eaf59e99269 +Author: Jiri Grönroos <jiri.gronroos@iki.fi> +Date: Wed Feb 15 18:37:04 2017 +0000 + + Update Finnish translation + + po/fi.po | 200 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 93 insertions(+), 107 deletions(-) + +commit bd979eba0c5816d701e47f2af4a87dee20758d26 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Wed Feb 15 09:31:24 2017 +0000 + + Update Spanish translation + + po/es.po | 198 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 92 insertions(+), 106 deletions(-) + +commit 80e5447b4ea2d4817f068f20f364aefc7dfe3e9e +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Feb 14 20:48:09 2017 +0100 + + EogZoomEntry: Move popover below the entry's icon + + src/eog-zoom-entry.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit a4cfef176916d1266e3181e9d48a9e9510f3a1a6 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Feb 14 20:32:30 2017 +0100 + + EogZoomEntry: Set a minimum width for the popover + + This should avoid the menu looking somewhat cramped. + + https://bugzilla.gnome.org/show_bug.cgi?id=778573 + + src/eog-zoom-entry.c | 1 + + 1 file changed, 1 insertion(+) + +commit a1f169556b244ef5e0c463b4a90034890d939595 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 13 21:30:35 2017 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 142d69fa7181ba51f7f081f49d11a213892243c3 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 13 21:25:20 2017 +0100 + + Prepare release 3.23.90 + + NEWS | 18 ++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 19 insertions(+), 1 deletion(-) + +commit 8d59ada016f13b6aa9a86c2022fdfe4a6c8a755a +Author: Kukuh Syafaat <syafaatkukuh@gmail.com> +Date: Mon Feb 13 06:44:46 2017 +0000 + + Update Indonesian translation + + po/id.po | 437 +++++++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 298 insertions(+), 139 deletions(-) + +commit 969f7c6f3e30c8c62fbcf55e2033c5fc7d8fb671 +Author: Marek Černocký <marek@manet.cz> +Date: Sun Feb 12 22:38:54 2017 +0100 + + Updated Czech translation + + po/cs.po | 140 +++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 88 insertions(+), 52 deletions(-) + +commit b808b0ce72c0973878548ee2047935dd8f8a6b64 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 12 20:47:59 2017 +0100 + + EogZoomEntry: Add forgotten GtkBuilder template + + data/Makefile.am | 1 + + data/eog-zoom-entry.ui | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 75 insertions(+) + +commit 5c5c1249de9199ff11a1bae44a402a526ea81723 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 12 20:43:27 2017 +0100 + + EogZoomEntry: Setup Gettext/Intltool + + po/POTFILES.in | 2 ++ + 1 file changed, 2 insertions(+) + +commit b5d37f3916f7611082d1b20598f2e703d4f0fecb +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 12 20:39:20 2017 +0100 + + EogZoomEntry: Replace zoom GtkRange + + This replaces the zoom GtkRange with a combined GtkEntry with buttons + and menu. This allows more control than the GtkRange-based solution + which wasn't even able to use the full zoom range. + EogZoomEntry is based on Evince's EvZoomAction. + + data/popup-menus.ui | 11 + + src/Makefile.am | 16 +- + src/eog-scroll-view.c | 674 +++++++++++++++++++++++++------------------------- + src/eog-scroll-view.h | 3 + + src/eog-window.c | 115 +-------- + src/eog-zoom-entry.c | 335 +++++++++++++++++++++++++ + src/eog-zoom-entry.h | 41 +++ + src/eog.gresource.xml | 1 + + 8 files changed, 746 insertions(+), 450 deletions(-) + +commit 277309100cb94526c3f439ac0d6eb9aa4076688d +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 12 19:10:12 2017 +0100 + + EogWindow: Fix keyboard controls in the popover menu + + This imports and adapts a workaround from gedit that keeps the keyboard + controls working in the popover menu and other widgets in the headerbar. + We lose some inofficial keyboard shortcuts in the process, but as their + names say, they were "inofficial". Maybe we can find a way to make them + work again in the future. + + https://bugzilla.gnome.org/show_bug.cgi?id=754985 + + src/eog-application.c | 4 ++-- + src/eog-window.c | 45 +++++++++++++++++++++++++++++++++++++++++++-- + 2 files changed, 45 insertions(+), 4 deletions(-) + +commit 866816812589e98bd022dae70d48c90ac68b89ec +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 12 18:32:53 2017 +0100 + + EogWindow: Handle "P" shortcut through global shortcuts + + src/eog-application.c | 1 + + src/eog-window.c | 9 --------- + 2 files changed, 1 insertion(+), 9 deletions(-) + +commit e9fc9d14b71fd5b7144df9aa894bec9b6732c305 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sun Feb 12 13:41:21 2017 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 129 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 63 insertions(+), 66 deletions(-) + +commit 44ea4a7c10f54c0b1b882a8dedc252a521c9ee89 +Author: Jordi Mas <jmas@softcatala.org> +Date: Tue Jan 24 17:35:02 2017 +0100 + + Update Catalan translation + + po/ca.po | 178 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 89 insertions(+), 89 deletions(-) + +commit d3442d2385cd43980a3a68e9071c95e47a2b4bd4 +Author: Dušan Kazik <prescott66@gmail.com> +Date: Wed Jan 18 18:56:08 2017 +0000 + + Update Slovak translation + + po/sk.po | 174 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 87 insertions(+), 87 deletions(-) + +commit bde2cde70621413769decb9f831738de584f6455 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 16 21:34:25 2017 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit f4cf4ccff4a17f8099f72db07ea19b77ec910d1b +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 16 21:09:31 2017 +0100 + + Prepare release 3.23.1 + + NEWS | 26 +++++++++++++++++++++++++- + 1 file changed, 25 insertions(+), 1 deletion(-) + +commit bf35ab399273b5b9c703bc26e58899561be39ae2 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 16 20:58:39 2017 +0100 + + Update git.mk + + Revision dde0ab2d from https://github.com/behdad/git.mk + + git.mk | 42 +++++++++++++++++++++++++++++++++++++----- + 1 file changed, 37 insertions(+), 5 deletions(-) + +commit fab6251be6eb582f5a2ee37520a76d6540c42453 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 16 19:47:51 2017 +0100 + + configure: Remove deprecated GNOME_MAINTAINER_MODE_DEFINES + + configure.ac | 1 - + 1 file changed, 1 deletion(-) + +commit d64db0290e98b21f915aea75be020e051570c6e9 +Author: Rafael Fontenelle <rafaelff@gnome.org> +Date: Sun Jan 15 18:30:53 2017 +0000 + + Update Brazilian Portuguese translation + + po/pt_BR.po | 358 +++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 207 insertions(+), 151 deletions(-) + +commit e557e8b6a40bf20ad0d9b868267817e3b3f25d7d +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 6 21:14:18 2017 +0100 + + EogWindow: Fix sRGB display profile fallback on Wayland + + https://bugzilla.gnome.org/show_bug.cgi?id=776984 + + src/eog-window.c | 112 +++++++++++++++++++++++++++++-------------------------- + 1 file changed, 59 insertions(+), 53 deletions(-) + +commit 3de58ce27176925d705518b15264d80097245109 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 29 15:10:46 2016 +0100 + + EogScrollView: Switch from GtkDeviceManager to GdkSeat + + src/eog-scroll-view.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit a155efd0987358826e003ae413ca5bedb5f58216 +Author: Jiri Grönroos <jiri.gronroos@iki.fi> +Date: Sun Dec 25 13:19:55 2016 +0000 + + Update Finnish translation + + po/fi.po | 238 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 132 insertions(+), 106 deletions(-) + +commit 32d2210e970c24d8e6004415e6b9f8e5dd0f9f58 +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Tue Dec 20 18:32:01 2016 +0000 + + Update German translation + + po/de.po | 172 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 86 insertions(+), 86 deletions(-) + +commit daf10d9f1fd8e21c82e7318459a78d88b2e84a84 +Author: Balázs Meskó <meskobalazs@gmail.com> +Date: Tue Dec 20 15:27:46 2016 +0000 + + Update Hungarian translation + + po/hu.po | 200 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 100 insertions(+), 100 deletions(-) + +commit b9e65e2bb96a00b2e2f81b48a866e8e31f36cdc3 +Author: Marek Černocký <marek@manet.cz> +Date: Sun Dec 18 22:13:57 2016 +0100 + + Updated Czech translation + + po/cs.po | 175 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 88 insertions(+), 87 deletions(-) + +commit 548676912d91e8f42e5e600b2b21ab569d082000 +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Thu Dec 15 22:28:06 2016 +0000 + + Update Friulian translation + + po/fur.po | 177 +++++++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 117 insertions(+), 60 deletions(-) + +commit 7f5d33b6b1ca5b23abe0c10d7786567d29177866 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Thu Dec 15 16:31:15 2016 +0100 + + Update Polish translation + + po/pl.po | 84 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 42 insertions(+), 42 deletions(-) + +commit bb43e716529211ed3b9fbaeae453b402c2b8cce5 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu Dec 15 09:05:56 2016 +0000 + + Update Spanish translation + + po/es.po | 299 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 162 insertions(+), 137 deletions(-) + +commit b973e770607ecfd7a989c9c0867c3f06be2541e6 +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Wed Dec 14 03:57:47 2016 +0000 + + Update Kazakh translation + + po/kk.po | 219 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 110 insertions(+), 109 deletions(-) + +commit 7684b1157b23228bbd6e4f13436224837a680b0e +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sun Nov 6 15:45:08 2016 +0100 + + Use Unicode in translatable strings + + See https://developer.gnome.org/hig/stable/typography.html + + https://bugzilla.gnome.org/show_bug.cgi?id=774001 + + data/org.gnome.eog.gschema.xml.in | 10 +++++----- + src/eog-close-confirmation-dialog.c | 6 +++--- + src/eog-error-message-area.c | 6 +++--- + src/eog-image-jpeg.c | 4 ++-- + src/eog-window.c | 28 ++++++++++++++-------------- + src/main.c | 4 ++-- + 6 files changed, 29 insertions(+), 29 deletions(-) + +commit 12eb105e0e4a5e11b87c19f632551a675f67f442 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Nov 19 19:17:37 2016 +0100 + + EogWindow: Fix leaked GVariant + + src/eog-window.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit e16b83ff369ec7e078faa948c1e1cb5a312299bf +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Nov 19 19:17:17 2016 +0100 + + EogApplication: Fix leaked GFile + + src/eog-application.c | 1 + + 1 file changed, 1 insertion(+) + +commit 73e3bd1f02769374c0b54d8407b78b9503942141 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 16 18:57:42 2016 +0100 + + EogScrollView: Replace deprecated gtk_menu_popup function + + src/eog-scroll-view.c | 17 ++--------------- + 1 file changed, 2 insertions(+), 15 deletions(-) + +commit d9240e1caee66946556fafb46a4709b543993072 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 16 18:12:55 2016 +0100 + + EogSidebar: Replace custom menu positioning function with built-in + + Gtk 3.22 has improved positioning functions for GtkMenu which + make it possible to drop our own positioning function. + This also works correctly in RTL locales now. + + configure.ac | 2 +- + src/eog-sidebar.c | 39 +++++++++------------------------------ + 2 files changed, 10 insertions(+), 31 deletions(-) + +commit 82a903e8e84c1e1120b3dca1f3c87afcb83167b2 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 16 18:11:36 2016 +0100 + + Post-branch version bump + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 3126ebacfb9e265570df04510bf2608ea8ce0823 +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Tue Nov 15 08:35:34 2016 +0000 + + Update Friulian translation + + po/fur.po | 50 +++++++++++++++++++++++++------------------------- + 1 file changed, 25 insertions(+), 25 deletions(-) + +commit 6b6b4a9fb40e757cd068ceca54a0eb39b67322e4 +Author: Dz Chen <wsxy162@gmail.com> +Date: Sun Oct 30 15:36:37 2016 +0800 + + Update zh_CN translation + + po/zh_CN.po | 527 +++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 325 insertions(+), 202 deletions(-) + +commit 3b9ec952f76701e90c0239cc5987d05b9f0adcf3 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Oct 11 19:40:29 2016 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d7ae13db01acb21054a329213f261626d66a7bfe +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Oct 11 19:36:52 2016 +0200 + + Prepare for release 3.20.5 + + NEWS | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + +commit e7f545175f73f2d4ac4a8e1f748045c57bd69162 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 8 22:48:54 2016 +0200 + + EogWindow: Fix bounds check in OpenWith action callback + + The previous check would let any index pass. + + src/eog-window.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit f8d3623cac31362c5075374f131323fdf45e4b5c +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 8 21:55:49 2016 +0200 + + Fix GResource dependency calculation for out-of-tree builds + + src/Makefile.am | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +commit 4c86268436464ad17fcb75a45f73462b1300ef6a +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 8 19:20:00 2016 +0200 + + EogThumbNav: Fix deprecated function warning + + Just call the callback function directly as that's why + the signal was manually triggered in the first place. + + src/eog-thumb-nav.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit b51b09964516ac3ef8845f1727d5ffc44c1aed49 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 8 19:03:05 2016 +0200 + + EogThumbNav: Fix deprecated min-slider-length CSS attribute + + GTK+ deprecated and ignored the attribute during the 3.20 cycle. + This replaces it with the min-width attribute, but requires + a slightly newer minimum GTK+ version. + + configure.ac | 2 +- + data/eog.css | 5 ++++- + 2 files changed, 5 insertions(+), 2 deletions(-) + +commit 85043d5c75bdd606dc4a059761582d007fdd967e +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Oct 4 19:33:49 2016 +0200 + + EogScrollView: Ensure view is redrawn if image is unset + + Otherwise the image could stay visible until the user triggers + a redraw, for example by mouse clicking. + + https://bugzilla.gnome.org/show_bug.cgi?id=772162 + + src/eog-scroll-view.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit b48a254295f91daf691cbfe3c6f22c55443c6a8f +Author: gogo <trebelnik2@gmail.com> +Date: Thu Sep 22 20:56:14 2016 +0000 + + Updated Croatian translation + + po/hr.po | 239 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--------- + 1 file changed, 205 insertions(+), 34 deletions(-) + +commit bfc0911ffbf3ddbb0d44c2361c8c58f4aae35fea +Author: Hannie Dumoleyn <hannie@ubuntu-nl.org> +Date: Thu Sep 15 11:51:30 2016 +0200 + + Updated Dutch translation Master 3.22 + + po/nl.po | 508 +++++++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 347 insertions(+), 161 deletions(-) + +commit 9a5d2a84938bcd06f7c57cf45750b9d0d9325cc7 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Thu Sep 8 02:11:24 2016 +0200 + + Updated Polish translation + + po/pl.po | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 4a2746f74923cc4a07fbeafd7054b50825f75e72 +Author: Jeremy Bicha <jbicha@ubuntu.com> +Date: Sat Sep 3 22:30:48 2016 -0400 + + Fix typo in Spanish translation header + + po/es.po | 38 +++++++++++++++++++------------------- + 1 file changed, 19 insertions(+), 19 deletions(-) + +commit 6b022222195dc9a4905030829e64e0db57558318 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Sep 3 19:51:38 2016 +0200 + + Fix Python 3 incompatibility in installed tests + + It's a list in Py2 but an iterator in Py3 now, + but it shouldn't make a difference to the for-operator. + + tests/common_steps.py | 2 +- + tests/steps/steps.py | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit e1b215f8926af391dd6f9a57f21e1ae9428686a2 +Author: David King <amigadave@amigadave.com> +Date: Sat Sep 3 17:59:19 2016 +0200 + + Update British English translation + + po/en_GB.po | 1703 +++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 946 insertions(+), 757 deletions(-) + +commit 2ca0ec45ff83318892bf96209efdff590761da5d +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Thu Aug 25 21:10:17 2016 +0200 + + Updated Slovenian translation + + po/sl.po | 470 ++++++++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 316 insertions(+), 154 deletions(-) + +commit 63ee4c9af8f572a372518187c9edc50f2847c8bc +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sun Aug 21 18:32:56 2016 +0200 + + Updated Polish translation + + po/pl.po | 172 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 84 insertions(+), 88 deletions(-) + +commit 0c77e6ef23b35aa42532a0cb1d61131d22fbc994 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 21 16:47:41 2016 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ea12a9d5260b539dc6bffdb71a8f0b5d1ca77213 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 21 16:33:54 2016 +0200 + + Prepare for release 3.20.4 + + NEWS | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +commit e99a8c00f959652fe7c10e2fa5a3a7a5c25e6af4 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 21 15:56:46 2016 +0200 + + EogErrorMessageArea: Make sure error messages are valid UTF8 + + GMarkup requires valid UTF8 input strings and would cause odd + looking messages if given invalid input. This could also trigger an + out-of-bounds write in glib before 2.44.1. Reported by kaslovdmitri. + + https://bugzilla.gnome.org/show_bug.cgi?id=770143 + + src/eog-error-message-area.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +commit 55036c6d55b06e82a480b559d59f5effae26399d +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 21 15:32:31 2016 +0200 + + EogImage: Fix leaked GError when loading an SVG fails + + Make sure the GError is not overwritten when closing the + handle if loading already failed earlier on. + This will handle SVG errors similar to errors from GdkPixbuf. + + https://bugzilla.gnome.org/show_bug.cgi?id=770197 + + src/eog-image.c | 11 +++++++---- + 1 file changed, 7 insertions(+), 4 deletions(-) + +commit 05ba302f51e1ab2a4ebfb048c0a429eb60c6eb4f +Author: Sinisa Habek <sinisa@habek.net> +Date: Fri Jul 29 16:00:04 2016 +0000 + + Updated Croatian translation + + po/hr.po | 2130 +++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 1209 insertions(+), 921 deletions(-) + +commit a362f32344772362d1762412286e0df3b26ddde9 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Fri Jul 15 20:52:15 2016 +0200 + + Add Language headers to po files + + Future versions of gettext will fail if this header is missing. + + po/am.po | 1 + + po/az.po | 1 + + po/be@latin.po | 1 + + po/bn.po | 1 + + po/bn_IN.po | 1 + + po/br.po | 1 + + po/ca@valencia.po | 2 +- + po/cy.po | 1 + + po/dz.po | 1 + + po/en@shaw.po | 1 + + po/es.po | 2 +- + po/fur.po | 2 +- + po/fy.po | 1 + + po/gu.po | 2 +- + po/hr.po | 1 + + po/it.po | 2 +- + po/ka.po | 1 + + po/km.po | 2 +- + po/ko.po | 2 +- + po/ks.po | 1 + + po/ku.po | 1 + + po/mai.po | 1 + + po/mg.po | 1 + + po/mk.po | 1 + + po/mn.po | 1 + + po/ms.po | 1 + + po/my.po | 1 + + po/nds.po | 1 + + po/nn.po | 1 + + po/nso.po | 1 + + po/or.po | 1 + + po/ps.po | 1 + + po/ru.po | 2 +- + po/rw.po | 1 + + po/si.po | 1 + + po/sl.po | 2 +- + po/sq.po | 1 + + po/sr@latin.po | 2 +- + po/ta.po | 2 +- + po/tk.po | 1 + + po/ug.po | 2 +- + po/uz.po | 1 + + po/uz@cyrillic.po | 1 + + po/wa.po | 1 + + po/zh_HK.po | 1 + + 45 files changed, 45 insertions(+), 12 deletions(-) + +commit 8582fed68abd401e6bd2012163a6f04d59dc9723 +Author: Muhammet Kara <muhammetk@gmail.com> +Date: Sat Jul 2 22:40:58 2016 +0000 + + Updated Turkish translation + + po/tr.po | 504 +++++++++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 330 insertions(+), 174 deletions(-) + +commit 7876998b08e5e22d9b82922dcf97c4a3f5e799dc +Author: Sebastian Rasmussen <sebras@gmail.com> +Date: Mon Jun 20 19:19:25 2016 +0000 + + Updated Swedish translation + + help/sv/sv.po | 1091 ++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 729 insertions(+), 362 deletions(-) + +commit 7abc7764da32a3097f038ec1dc41e338368a6a69 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 20 19:40:17 2016 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0ad859e6a4546cef0915902f6181fcd8f5a1ee0e +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 20 19:33:15 2016 +0200 + + Prepare for release 3.20.3 + + NEWS | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +commit 7e32c42ef40a2fd19227b397913c063bd33f831b +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 20 18:59:07 2016 +0200 + + EogListStore: Use the CHANGES_DONE_HINT to detect file changes + + This avoids problems with the collection because of the file + not being recognized as a valid image while the changes are written. + + https://bugzilla.gnome.org/show_bug.cgi?id=767003 + + src/eog-list-store.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit ca4c09a64b3f33abe67d46b8dbd4e44e1e028af5 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 13 20:35:52 2016 +0200 + + EogExifUtil: Fix build with newer GCC + + Newer gcc may produce an error if they cannot + check the format arguments. + + src/eog-exif-util.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +commit fe8135a278da7f263978a60616a8fe8cb1cfd159 +Author: Cédric Valmary <cvalmary@yahoo.fr> +Date: Mon May 30 20:08:33 2016 +0000 + + Updated Occitan translation + + po/oc.po | 1725 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 868 insertions(+), 857 deletions(-) + +commit dee44d9bdc559896e81c39db0292e728c7faf260 +Author: Frédéric Péters <fpeters@0d.be> +Date: Fri May 27 13:59:27 2016 +0200 + + po: French translation quick fix + + po/fr.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit cea2eef5d59d2f7b2d3a320bbc78b2b373b60ce1 +Author: Theppitak Karoonboonyanan <theppitak@gmail.com> +Date: Tue May 24 14:53:53 2016 +0700 + + Updated Thai translation + + po/th.po | 1516 +++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 809 insertions(+), 707 deletions(-) + +commit 3bff39c59b70eb7005f03c02f9cfe70cbec5870e +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Mon May 23 19:11:33 2016 +0200 + + Updated Norwegian bokmål translation. + + po/nb.po | 146 +++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 90 insertions(+), 56 deletions(-) + +commit 7192e15a8096401272c8f8d7893165f1502eaed5 +Author: Sveinn í Felli <sv1@fellsnet.is> +Date: Sat May 14 22:42:53 2016 +0000 + + Updated Icelandic translation + + po/is.po | 480 ++++++++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 325 insertions(+), 155 deletions(-) + +commit 99970941bd75584df6f70a24aa99fd3f3633664c +Author: Daniel Șerbănescu <daniel@serbanescu.dk> +Date: Thu May 12 16:54:58 2016 +0000 + + Updated Romanian translation + + po/ro.po | 346 +++++++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 238 insertions(+), 108 deletions(-) + +commit db6c4962f6c51f402087b51a8158195cb0479c07 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 9 21:23:13 2016 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 082628f6b410bca46cf7b92dfc9cc1a4a07d21f3 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 9 21:20:28 2016 +0200 + + Prepare for release 3.20.2 + + NEWS | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +commit 5d9b268e13c1d5d52cd65452902222b5e9aac52b +Author: sujiniku <sujinikusityuu@gmail.com> +Date: Sun May 8 22:33:40 2016 +0900 + + Updated Japanese translation + + help/ja/figures/image-view-prefs.png | Bin 0 -> 49743 bytes + help/ja/figures/multiple-convert.png | Bin 0 -> 49541 bytes + help/ja/figures/multiple-rename-count.png | Bin 0 -> 51246 bytes + help/ja/figures/plugin-send-by-mail.png | Bin 0 -> 30654 bytes + help/ja/figures/plugins-all.png | Bin 0 -> 141723 bytes + help/ja/figures/prefs-plugins-date.png | Bin 0 -> 47352 bytes + help/ja/figures/prefs-plugins-fullscreen.png | Bin 0 -> 47187 bytes + help/ja/figures/prefs-plugins.png | Bin 0 -> 44690 bytes + help/ja/figures/slideshow-prefs.png | Bin 0 -> 32054 bytes + help/ja/ja.po | 1597 ++++++++++++++++---------- + 10 files changed, 982 insertions(+), 615 deletions(-) + +commit 79934d1f4d42d62d82cd3b3f06c66b396df8918d +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Sun May 8 22:27:51 2016 +0900 + + l10n: Delete obsolete screenshots + + help/ja/figures/eog-toolbar-editor.png | Bin 12107 -> 0 bytes + help/ja/figures/image-view-prefs.png | Bin 13871 -> 0 bytes + help/ja/figures/multiple-convert.png | Bin 12553 -> 0 bytes + help/ja/figures/multiple-rename-count.png | Bin 13359 -> 0 bytes + help/ja/figures/plugin-send-by-mail.png | Bin 22025 -> 0 bytes + help/ja/figures/plugin-tools-flickr.png | Bin 21927 -> 0 bytes + help/ja/figures/plugins-all.png | Bin 25758 -> 0 bytes + help/ja/figures/prefs-plugins-date.png | Bin 14016 -> 0 bytes + help/ja/figures/prefs-plugins-fullscreen.png | Bin 13681 -> 0 bytes + help/ja/figures/prefs-plugins.png | Bin 13173 -> 0 bytes + help/ja/figures/slideshow-prefs.png | Bin 10748 -> 0 bytes + 11 files changed, 0 insertions(+), 0 deletions(-) + +commit c80b70734f91e4f35fabad6c3c48e335a19f084c +Author: GNOME Translation Robot <gnome-sysadmin@gnome.org> +Date: Fri Apr 29 10:17:04 2016 +0000 + + Updated Scottish Gaelic translation + + po/gd.po | 337 ++++++++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 238 insertions(+), 99 deletions(-) + +commit d88f084cae9e30482af169a2fbcfc387828b3854 +Author: GNOME Translation Robot <gnome-sysadmin@gnome.org> +Date: Wed Apr 27 19:01:53 2016 +0000 + + Updated Portuguese translation + + po/pt.po | 231 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 136 insertions(+), 95 deletions(-) + +commit fbe0a95e7b535fc4950c30910574a0eb0e1ac455 +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Fri Apr 15 23:25:08 2016 +0000 + + Updated Friulian translation + + po/fur.po | 32 ++++++++++++++++---------------- + 1 file changed, 16 insertions(+), 16 deletions(-) + +commit ec5c004867ede6c104c281a58fb0a71f650f4871 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 11 22:00:50 2016 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 4c30407752262b373216f057c9acb8a217ac5cae +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 11 21:57:43 2016 +0200 + + Prepare for release 3.20.1 + + NEWS | 20 +++++++++++++++++++- + 1 file changed, 19 insertions(+), 1 deletion(-) + +commit 65e61ccc81987643d9642a3b2bd49dd01674b591 +Author: Debarshi Ray <debarshir@gnome.org> +Date: Thu Apr 7 10:14:19 2016 +0200 + + Reduce the number of g_file_query_info calls at start-up + + https://bugzilla.gnome.org/show_bug.cgi?id=764139 + + src/eog-image.c | 3 ++- + src/eog-image.h | 2 +- + src/eog-list-store.c | 41 ++++++++++++++++++++++++++++++----------- + 3 files changed, 33 insertions(+), 13 deletions(-) + +commit 14401d33e74946f0833e040434713da12745ef58 +Author: Debarshi Ray <debarshir@gnome.org> +Date: Thu Apr 7 09:27:06 2016 +0200 + + EogImage: Remove unused constructor + + https://bugzilla.gnome.org/show_bug.cgi?id=764139 + + src/eog-image.c | 12 ------------ + src/eog-image.h | 2 -- + 2 files changed, 14 deletions(-) + +commit 0cef44d7e3d17e30ff61138a8614697157ea3c35 +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Sat Apr 9 09:56:56 2016 +0000 + + Updated Friulian translation + + po/fur.po | 169 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 84 insertions(+), 85 deletions(-) + +commit 160600f2510a01332e956f7c36f821d5f6eb8d66 +Author: Arash Mousavi <mousavi.arash@gmail.com> +Date: Sat Apr 9 13:40:52 2016 +0430 + + Update Persian translations + + po/fa.po | 701 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 421 insertions(+), 280 deletions(-) + +commit 8169e0ac6447ebeb1d1e809213ce82b814b62550 +Author: Debarshi Ray <debarshir@gnome.org> +Date: Thu Apr 7 20:13:16 2016 +0200 + + EogScrollView: Prevent a crash when queueing a new draw + + Fall out from 88c4f54eb9cee69b1eebef462df27f76119bec62 + + https://bugzilla.gnome.org/show_bug.cgi?id=665897 + + src/eog-scroll-view.c | 1 + + 1 file changed, 1 insertion(+) + +commit 9d4580b2d7d72baf712ff46cb3e1ab66c1dcf9db +Author: Andika Triwidada <andika@gmail.com> +Date: Tue Apr 5 09:39:47 2016 +0000 + + Updated Indonesian translation + + po/id.po | 755 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 390 insertions(+), 365 deletions(-) + +commit fb68bd1470056c6beb1aadf988858e418ea1cbf2 +Author: Richard Hughes <richard@hughsie.com> +Date: Mon Mar 28 16:32:52 2016 +0100 + + AppData: Mark as unremovable in GNOME Software + + data/eog.appdata.xml.in | 1 + + 1 file changed, 1 insertion(+) + +commit 8809eb8af5b9f8f3f6c742f0cd0f25209aace1f9 +Author: Trần Ngọc Quân <vnwildman@gmail.com> +Date: Sun Mar 27 08:50:03 2016 +0700 + + Updated Vietnamese translation + + Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com> + + po/vi.po | 472 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 299 insertions(+), 173 deletions(-) + +commit 96073162258fe9d70def7fb9a549dcef3095bb2b +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Wed Mar 23 11:53:26 2016 +0000 + + Updated Friulian translation + + po/fur.po | 700 +++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 414 insertions(+), 286 deletions(-) + +commit ef2fa5461f8b8dcfd5791296c75e0f046cf8a8ca +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Mar 22 11:50:23 2016 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit da9f51ca9ca9b9d6feed64618196b6ef384bdbde +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Mar 22 11:47:07 2016 +0100 + + Prepare for release 3.20.0 + + NEWS | 12 ++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 14 insertions(+), 2 deletions(-) + +commit bf1fa88a21cea8c6bb14da83757fac4077310294 +Author: Ask Hjorth Larsen <asklarsen@gmail.com> +Date: Sun Mar 20 23:09:40 2016 +0100 + + Updated Danish translation + + po/da.po | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +commit 5b547c15100a954e7f34928f787f44b5c4e44ce6 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Sun Mar 20 19:07:38 2016 +0100 + + Updated Basque language + + po/eu.po | 452 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 289 insertions(+), 163 deletions(-) + +commit 34de8b0914c663c3a9920e3841c1cddc02523c26 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Sun Mar 20 17:09:34 2016 +0000 + + Updated Italian translation + + po/it.po | 411 +++++++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 284 insertions(+), 127 deletions(-) + +commit d3e92aa5af77e9a8023ae99ce4e94cd952bccf54 +Author: Милош Поповић <gpopac@gmail.com> +Date: Sun Mar 20 11:00:33 2016 +0000 + + Updated Serbian Latin translation + + po/sr@latin.po | 173 +++++++++++++++++++++++++-------------------------------- + 1 file changed, 76 insertions(+), 97 deletions(-) + +commit 19365bead0bf84897a012a98d177307639d3fc94 +Author: Марко Костић <marko.m.kostic@gmail.com> +Date: Sun Mar 20 10:59:34 2016 +0000 + + Updated Serbian translation + + po/sr.po | 173 ++++++++++++++++++++++++++++----------------------------------- + 1 file changed, 76 insertions(+), 97 deletions(-) + +commit 77f05e7ee6e3efcab15ebcad02f5a0a507162fc5 +Author: Ask Hjorth Larsen <asklarsen@gmail.com> +Date: Sat Mar 19 16:35:00 2016 +0100 + + Updated Danish translation by scootergrisen + + po/da.po | 941 +++++++++++++++++++++++++-------------------------------------- + 1 file changed, 374 insertions(+), 567 deletions(-) + +commit 6738cc1c3b24589d4933e1bc9407035ca5d83d18 +Author: Changwoo Ryu <cwryu@debian.org> +Date: Wed Mar 16 20:00:07 2016 +0000 + + Updated Korean translation + + po/ko.po | 424 +++++++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 293 insertions(+), 131 deletions(-) + +commit 72f378e7fe91d9c6b14a672ce566f8f21aeb0423 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 14 20:44:05 2016 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b5196a06cc891195914251b756362759201cee0a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 14 20:39:25 2016 +0100 + + Prepare for release 3.19.92 + + NEWS | 25 +++++++++++++++++++++++++ + 1 file changed, 25 insertions(+) + +commit 4e74b7661893e64547858db6e4775e012bb63e0a +Author: Debarshi Ray <debarshir@gnome.org> +Date: Fri Mar 11 19:01:22 2016 +0100 + + EogPrintPreview: Silence -Wswitch-default + + https://bugzilla.gnome.org/show_bug.cgi?id=763505 + + src/eog-print-preview.c | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +commit be81fa70d6f8ca82ee9beec8dbaf5391f9c5d36a +Author: Debarshi Ray <debarshir@gnome.org> +Date: Fri Mar 11 18:54:49 2016 +0100 + + EogPrintPreview: Silence -Wsign-compare + + https://bugzilla.gnome.org/show_bug.cgi?id=763505 + + src/eog-print-preview.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +commit 43e5257c08f06e252e1e4aafc549bc29bc82e002 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Mon Mar 14 14:42:21 2016 +0000 + + Updated Japanese translation + + po/ja.po | 81 ++++++++++++++++++++++++++++++++++++++++++++++------------------ + 1 file changed, 59 insertions(+), 22 deletions(-) + +commit 3b5852bb17995ba9c03c8b1cec133fb684e5e22b +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Mon Mar 14 04:10:35 2016 +0100 + + Updated Polish translation + + po/pl.po | 64 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 32 insertions(+), 32 deletions(-) + +commit c3e2802e3c5c3bb96185d2b40812ecbad13b3e01 +Author: Jiri Grönroos <jiri.gronroos@iki.fi> +Date: Sun Mar 13 13:30:04 2016 +0000 + + Updated Finnish translation + + po/fi.po | 175 ++++++++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 117 insertions(+), 58 deletions(-) + +commit 9b268017af020589948dfde1bae292e2093e0e75 +Author: Jordi Mas <jmas@softcatala.org> +Date: Fri Mar 11 19:01:00 2016 +0100 + + Fix to Catalan translation + + po/ca.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b874815a09d4385065f19a650e7b5e06c7e6fa5f +Author: Robert Ancell <robert.ancell@canonical.com> +Date: Thu Mar 10 16:55:24 2016 +1300 + + EogWindow: Correctly check the value of XDG_CURRENT_DESKTOP + + XDG_CURRENT_DESKTOP is a list of desktop names, check if any value matches Unity. + + src/eog-window.c | 25 ++++++++++++++++++++++++- + 1 file changed, 24 insertions(+), 1 deletion(-) + +commit 7bf215e203e07560f9623697fe1f1c702e8d82f6 +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Sat Mar 5 21:50:29 2016 +0200 + + Updated Lithuanian translation + + po/lt.po | 80 +++++++++++++++++++++++++++++++++++++++++++++++----------------- + 1 file changed, 59 insertions(+), 21 deletions(-) + +commit 074d43599bd1cfed848f1f993a3d583bae17122c +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Sat Mar 5 14:12:12 2016 +0200 + + Update Latvian translation + + po/lv.po | 78 ++++++++++++++++------------------------------------------------ + 1 file changed, 19 insertions(+), 59 deletions(-) + +commit e559d7063d8a66f9b51ed54e71b8a8e0a6a25f9b +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Fri Mar 4 15:24:32 2016 +0200 + + Updated Ukrainian translation + + po/uk.po | 556 +++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 346 insertions(+), 210 deletions(-) + +commit ea41a6fe826b46cd04bb8b53958e26c3f961795b +Author: Stas Solovey <whats_up@tut.by> +Date: Thu Mar 3 11:50:14 2016 +0000 + + Updated Russian translation + + po/ru.po | 467 ++++++++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 327 insertions(+), 140 deletions(-) + +commit bea73bcc4b9b54b15f24166eac9d7e9c1b881442 +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Wed Mar 2 21:24:40 2016 +0200 + + Updated Hebrew translation + + po/he.po | 84 +++++++++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 59 insertions(+), 25 deletions(-) + +commit 8d9a3a2ab0f0bdf7f4343dac2367c20b713a0cae +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Wed Mar 2 11:37:25 2016 +0400 + + Update Arabic translation + + po/ar.po | 463 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 293 insertions(+), 170 deletions(-) + +commit d1f6bddd6e04b147e889c2c8d73a38bc0c91ecad +Author: Efstathios Iosifidis <eiosifidis@gnome.org> +Date: Tue Mar 1 23:17:13 2016 +0000 + + Updated Greek translation + + po/el.po | 47 +++++++++++++++++++++++++---------------------- + 1 file changed, 25 insertions(+), 22 deletions(-) + +commit 7407cc63257f0f8dc23c00c1e542e1f8e2ec88b6 +Author: Dušan Kazik <prescott66@gmail.com> +Date: Tue Mar 1 20:04:50 2016 +0000 + + Updated Slovak translation + + po/sk.po | 45 ++++++++++++++++++++++++--------------------- + 1 file changed, 24 insertions(+), 21 deletions(-) + +commit 23fa87328ff3a213da67b846c156dac3c0f13672 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 29 20:58:27 2016 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8bed5795d674acdcd101c32d6237247744340ae0 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 29 20:56:31 2016 +0100 + + Prepare for release 3.19.91 + + NEWS | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +commit 6ed4e90a9d08c26e133ee7d707a36240acd0ed62 +Author: Jordi Mas <jmas@softcatala.org> +Date: Sun Feb 28 22:49:14 2016 +0100 + + Update Catalan translation + + po/ca.po | 460 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 296 insertions(+), 164 deletions(-) + +commit a59c31e4e22a80e5a71516f1544489162218a020 +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Sun Feb 28 19:34:01 2016 +0000 + + Updated French translation + + po/fr.po | 43 +++++++++++++++++++++++-------------------- + 1 file changed, 23 insertions(+), 20 deletions(-) + +commit 7d6db46b4f759ba2ef94bc6737d16030b838b132 +Author: Marek Černocký <marek@manet.cz> +Date: Thu Feb 25 11:37:07 2016 +0100 + + Updated Czech translation + + po/cs.po | 74 ++++++++++++++++++++++++++++++++++++++++++++++------------------ + 1 file changed, 54 insertions(+), 20 deletions(-) + +commit dec9785d7d9bcde41332cfb94680f552b08b1184 +Author: Fran Dieguez <fran.dieguez@mabishu.com> +Date: Wed Feb 24 15:09:36 2016 +0100 + + Updated Galician translations + + po/gl.po | 466 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 296 insertions(+), 170 deletions(-) + +commit 6c0ba41120ad907daea20b0119a0f6c1753bcbf6 +Author: Anders Jonsson <anders.jonsson@norsjovallen.se> +Date: Sun Feb 21 21:39:30 2016 +0000 + + Updated Swedish translation + + po/sv.po | 196 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++------- + 1 file changed, 177 insertions(+), 19 deletions(-) + +commit 354c89cd36616e62742a464140e69d075afb3881 +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Sat Feb 20 10:06:04 2016 +0100 + + Updated Serbian translation + + po/sr.po | 493 ++++++++++++++++++++++++++++++++++++++------------------- + po/sr@latin.po | 493 ++++++++++++++++++++++++++++++++++++++------------------- + 2 files changed, 652 insertions(+), 334 deletions(-) + +commit d9a509adefade3ee02e26c86c1419ac0cf236e52 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Wed Feb 17 22:39:57 2016 +0100 + + Updated Polish translation + + po/pl.po | 37 ++++++++++++++++++------------------- + 1 file changed, 18 insertions(+), 19 deletions(-) + +commit aea617e11c8cf364d0bce25cfc8053e4ec44eda9 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 15 21:02:19 2016 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ebdcf2c619262c66309328be7297b53e3aa76ad6 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 15 20:59:46 2016 +0100 + + Prepare for release 3.19.90 + + NEWS | 33 +++++++++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 34 insertions(+), 1 deletion(-) + +commit 88c4f54eb9cee69b1eebef462df27f76119bec62 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 15 20:49:48 2016 +0100 + + EogScrollView: Implement simple two-pass filtering + + Show the filtered image only after a short time. + This should improve the UI's responsiveness quite a bit. + + https://bugzilla.gnome.org/show_bug.cgi?id=665897 + + src/eog-scroll-view.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++---- + 1 file changed, 62 insertions(+), 4 deletions(-) + +commit cfc04c7195683d038c069b24c666a30c7853cb42 +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Mon Feb 15 20:18:40 2016 +0100 + + Updated German translation + + po/de.po | 33 ++++++++++++++++++--------------- + 1 file changed, 18 insertions(+), 15 deletions(-) + +commit dfc5f0b12685f6cff2a53ef523fb2cc2f0c0fd95 +Author: Richard Hughes <richard@hughsie.com> +Date: Mon Feb 15 15:20:38 2016 +0000 + + data: Add missing information to the AppData file + + It now should not display as 'non-free' when viewed with GNOME Software. + + data/eog.appdata.xml.in | 20 ++++++++++++++------ + 1 file changed, 14 insertions(+), 6 deletions(-) + +commit c1ac983bf3bdbd7d8ab4ab34208f1f399bdacbfc +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 14 18:50:43 2016 +0100 + + EogPrintPreview: Fix possible integer overflow + + This removes code copied from GDK that was susceptiple to a possible + integer overflow (cf. CVE-2013-7447), although the code only worked + on images too small to trigger the overflow. GDK provides a (fixed) + variant of the code with the same features nowadays, so just use that. + + https://bugzilla.gnome.org/show_bug.cgi?id=762028 + + src/eog-print-preview.c | 96 ++----------------------------------------------- + 1 file changed, 3 insertions(+), 93 deletions(-) + +commit fbc11280c6929852100de40e2dc70f5ec2adcea7 +Author: Russell Haley <yumpusamongus@gmail.com> +Date: Sat Feb 13 18:59:17 2016 -0600 + + EogScrollView: Use better downscaling filter to fix Bug 665897 + + Replace all instances of CAIRO_FILTER_BILINEAR with CAIRO_FILTER_GOOD. + This produces much less aliasing on downscaled images. CAIRO_FILTER_GOOD + uses the same method as CAIRO_FILTER_BILINEAR for scale factors greater + than 0.75, according to https://bugs.webkit.org/show_bug.cgi?id=147826. + + Comparison screenshots made with eog 3.18.1: http://imgur.com/a/NaoOs + + CAIRO_FILTER_BEST is better still, but the the visual difference is + almost imperceptible and the performance impact is severe. + + https://bugzilla.gnome.org/show_bug.cgi?id=665897 + + src/eog-scroll-view.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit 64376d1d2042a92ca5b3312d6950086c2f6a75bd +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Thu Feb 11 22:46:35 2016 +0000 + + Updated French translation + + po/fr.po | 463 +++++++++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 299 insertions(+), 164 deletions(-) + +commit 973a59f4b85ec8de1cd34b9ac8c41b7487da7036 +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Thu Feb 11 23:43:54 2016 +0100 + + Unify non-use of hyphens + + data/help-overlay.ui | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 6e437f4e9e7b309faf1b2ec328ce68ad70c0861c +Author: Rafael Fontenelle <rffontenelle@gmail.com> +Date: Wed Feb 10 17:25:58 2016 +0000 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 89 ++++++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 62 insertions(+), 27 deletions(-) + +commit 04b3480324057df4e8f36b2a31754e344b3b8de0 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Tue Feb 9 10:32:53 2016 +0000 + + Updated Chinese (Taiwan) translation + + po/zh_TW.po | 755 +++++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 492 insertions(+), 263 deletions(-) + +commit b5696d3dd3062fabcfad2573e1d9903567b1205b +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Tue Feb 9 04:52:20 2016 +0000 + + Updated Kazakh translation + + po/kk.po | 55 +++++++++++++++++++++++++++++++++++++++++++++++-------- + 1 file changed, 47 insertions(+), 8 deletions(-) + +commit 62566b65dca0a4bf64359ae6993f47ddf874f070 +Author: Balázs Meskó <meskobalazs@gmail.com> +Date: Sun Feb 7 14:31:09 2016 +0000 + + Updated Hungarian translation + + po/hu.po | 49 ++++++++++++++++++++++++++++++++++++++++++------- + 1 file changed, 42 insertions(+), 7 deletions(-) + +commit 3bf6717df3265dd70fc427528a7fa1fa0847dfca +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sun Feb 7 13:11:24 2016 +0100 + + Updated Spanish translation + + po/es.po | 80 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------ + 1 file changed, 73 insertions(+), 7 deletions(-) + +commit dd1c5bbe5e4e0d92cb9c92ba3def0e5935ac8d55 +Author: Alexander Shopov <ash@kambanaria.org> +Date: Sat Feb 6 21:44:42 2016 +0200 + + Updated Bulgarian translation + + po/bg.po | 527 ++++++++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 354 insertions(+), 173 deletions(-) + +commit cf5359f546665e01728b29507d22230d5064bb3d +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sat Feb 6 17:36:44 2016 +0100 + + Updated Polish translation + + po/pl.po | 412 +++++++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 283 insertions(+), 129 deletions(-) + +commit f27018896886992a035cf89dcb415347546bbef6 +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Sat Feb 6 16:30:38 2016 +0200 + + Update Latvian translation + + po/lv.po | 430 +++++++++++++++++++++++++++++++++++++++++++++------------------ + 1 file changed, 306 insertions(+), 124 deletions(-) + +commit 2aeab5e5152d0ae432ccfc7c2c66396c8fdb2c1d +Author: Tom Tryfonidis <tomtryf@gnome.org> +Date: Sat Feb 6 11:40:21 2016 +0000 + + Updated Greek translation + + po/el.po | 169 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-------- + 1 file changed, 149 insertions(+), 20 deletions(-) + +commit fdc96d91bf9319b715aa8bc194607ff1375c17f0 +Author: Dušan Kazik <prescott66@gmail.com> +Date: Sat Feb 6 09:10:03 2016 +0000 + + Updated Slovak translation + + po/sk.po | 58 +++++++++++++++++++++++++++++++++++++++++++++++++--------- + 1 file changed, 49 insertions(+), 9 deletions(-) + +commit 205fd857b6e5c4808e72fcbcce4d8a32ec81cf69 +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Tue Feb 2 19:50:43 2016 +0100 + + Updated German translation + + po/de.po | 43 +++++++++++++++++++++++++++++++++++++++---- + 1 file changed, 39 insertions(+), 4 deletions(-) + +commit 8e0bb0c85fe932d241a01e67f0de5881b2a22f92 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Mon Feb 1 18:17:07 2016 +0100 + + Add context to strings in the shortcut window + + It helps translators by differentiating the help strings from other strings + in the app that might be identical, and allowing to translate them + accordingly. + + https://bugzilla.gnome.org/show_bug.cgi?id=761408 + + data/help-overlay.ui | 72 ++++++++++++++++++++++++++-------------------------- + 1 file changed, 36 insertions(+), 36 deletions(-) + +commit bb1a598d0ebac3186381e6fec252c71612859f19 +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Mon Feb 1 19:54:56 2016 +0100 + + Updated German translation + + po/de.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit 156560596414dff7290911abe810160cb2b2e35a +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Mon Feb 1 18:15:36 2016 +0100 + + Remove trailing spaces in a shortcut window's string + + data/help-overlay.ui | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit cd24e875c909cb8ef0817d09d47aa26d538afb5f +Author: Richard Hughes <richard@hughsie.com> +Date: Mon Jan 25 15:37:27 2016 +0000 + + Add a missing tag to the AppData file + + data/eog.appdata.xml.in | 1 + + 1 file changed, 1 insertion(+) + +commit 2d483f418e6c3edcc9ebb4201f19f2790d4948d9 +Author: Rafael Fontenelle <rffontenelle@gmail.com> +Date: Mon Jan 25 14:22:38 2016 +0000 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 18 +++++++++++------- + 1 file changed, 11 insertions(+), 7 deletions(-) + +commit c4d1b95d179b87dc0bdb8f977b8121203235a565 +Author: Richard Hughes <richard@hughsie.com> +Date: Mon Jan 25 13:09:50 2016 +0000 + + Add a missing tag to the AppData file + + data/eog.appdata.xml.in | 1 + + 1 file changed, 1 insertion(+) + +commit 4372b57896be29b0ef53f0c820a336ee3d98cb05 +Author: Balázs Meskó <meskobalazs@gmail.com> +Date: Mon Jan 25 12:08:21 2016 +0000 + + Updated Hungarian translation + + po/hu.po | 430 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 262 insertions(+), 168 deletions(-) + +commit cfeda3006ce46bbdf292ca8ce52ae043a0157d9c +Author: Jiri Grönroos <jiri.gronroos@iki.fi> +Date: Wed Jan 20 22:27:50 2016 +0000 + + Updated Finnish translation + + po/fi.po | 53 ++++++++++++----------------------------------------- + 1 file changed, 12 insertions(+), 41 deletions(-) + +commit 13576e9e0f6e8f05a85cd9d09c33dc73747e247f +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 20 20:53:38 2016 +0100 + + AppData: Add more kudos + + eog qualifies for AppMenu and HighContras as well. + + data/eog.appdata.xml.in | 2 ++ + 1 file changed, 2 insertions(+) + +commit 00c026bcb02af494867cf4cd16920c5a83020567 +Author: David King <amigadave@amigadave.com> +Date: Tue Jan 19 10:41:46 2016 +0000 + + Fix Finnish help translation + + help/fi/fi.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 5ed5adef2fdbeafa8b46c2d210a1a22aa0b91ec0 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 18 21:14:27 2016 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 6ec83ee1285ee69dfe1cf228b4533e03f92ad89d +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 18 21:11:43 2016 +0100 + + Prepare for release 3.19.4 + + NEWS | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +commit f7a199cab53ea1007473b2936e0084eaf2ea4cc0 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 18 20:45:52 2016 +0100 + + appdata: Add kudos + + data/eog.appdata.xml.in | 5 +++++ + 1 file changed, 5 insertions(+) + +commit 4947823f00b42c17a00b9207f17f7cea5e18f429 +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Sun Jan 17 21:20:58 2016 +0200 + + Updated Lithuanian translation + + po/lt.po | 50 +++++++++++++++++++++++++++----------------------- + 1 file changed, 27 insertions(+), 23 deletions(-) + +commit 3ff094328d39c1b05cbc006625c6cc5542f1abee +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Sat Jan 16 03:29:27 2016 +0000 + + Updated Japanese translation + + po/ja.po | 414 ++++++++++++++++++++++++++++++++++++++++++++++++--------------- + 1 file changed, 319 insertions(+), 95 deletions(-) + +commit 7e9a3906cc8891e74640425fd2745b65d891cfed +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Fri Jan 15 14:07:31 2016 +0200 + + Updated Hebrew translation + + po/he.po | 185 +++++++++++++++++++++++++++++++++++++++++++++++---------------- + 1 file changed, 138 insertions(+), 47 deletions(-) + +commit df3cf6341fc3dbb73e012519e3ab57a370d590fe +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sun Jan 10 12:53:26 2016 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 148 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++------ + 1 file changed, 136 insertions(+), 12 deletions(-) + +commit 1c4e8310513cfaad0ece9b242206817868141662 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu Jan 7 23:08:06 2016 +0100 + + Updated Spanish translation + + po/es.po | 47 +++++++++++------------------------------------ + 1 file changed, 11 insertions(+), 36 deletions(-) + +commit 5ef998236380bf7eaf19a2ce88daacc73aac0856 +Author: Jiri Grönroos <jiri.gronroos@iki.fi> +Date: Wed Jan 6 11:49:40 2016 +0000 + + Updated Finnish translation + + po/fi.po | 218 ++++++++++++++++++++++++++++++++++++++++++++++++++------------- + 1 file changed, 174 insertions(+), 44 deletions(-) + +commit 07bc468508b0d2d463991fd1f94160dd9712bd68 +Author: Marek Černocký <marek@manet.cz> +Date: Mon Jan 4 13:08:37 2016 +0100 + + Updated Czech translation + + po/cs.po | 18 +++++++++++------- + 1 file changed, 11 insertions(+), 7 deletions(-) + +commit 1b694c16d9519d0fef93ba71f1a16e56d8c4f804 +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Sun Jan 3 23:36:11 2016 +0100 + + Updated German translation + + po/de.po | 18 +++++++++++------- + 1 file changed, 11 insertions(+), 7 deletions(-) + +commit a1c2b3f682177c9932e64dd78b8af67a0d409571 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 3 14:39:25 2016 +0100 + + appmenu: Add entry to open the help overlay + + data/eog-app-menu.xml | 4 ++++ + 1 file changed, 4 insertions(+) + +commit 931e0f818c6d0cd918f47df777a23d62d2fd2420 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jan 2 19:05:48 2016 +0100 + + EogApplication: Have the app menu automatically loaded by GtkApplication + + src/eog-application.c | 18 ------------------ + src/eog.gresource.xml | 2 +- + 2 files changed, 1 insertion(+), 19 deletions(-) + +commit 30cbdad2b8e5dacfa425a3eb5d90d2666576e69e +Author: Rafael Fontenelle <rffontenelle@gmail.com> +Date: Sat Jan 2 06:24:56 2016 +0000 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 409 +++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 251 insertions(+), 158 deletions(-) + +commit bab5b71d04b6e11da827522df6a9ba94dc03f8c3 +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Tue Dec 29 14:53:09 2015 +0100 + + Updated German translation + + po/de.po | 412 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 251 insertions(+), 161 deletions(-) + +commit 11e6875dfaa4b1676b67b6b083a73e311daab15d +Author: Tom Tryfonidis <tomtryf@gnome.org> +Date: Tue Dec 29 11:35:41 2015 +0000 + + Updated Greek translation + + po/el.po | 599 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 351 insertions(+), 248 deletions(-) + +commit 97cac464a0b46f2e6fc7796b7bdc3375f911ea68 +Author: Marek Černocký <marek@manet.cz> +Date: Thu Dec 24 13:43:25 2015 +0100 + + Updated Czech translation + + po/cs.po | 138 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----- + 1 file changed, 129 insertions(+), 9 deletions(-) + +commit 4c97e4dd170a91c8a7c76a0b08dfbe7ff790a95f +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Sun Dec 20 15:19:03 2015 +0200 + + Updated Lithuanian translation + + po/lt.po | 138 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----- + 1 file changed, 129 insertions(+), 9 deletions(-) + +commit c1d1d18a41c65566cd7ce8a76d5beb1177d11e65 +Author: Dušan Kazik <prescott66@gmail.com> +Date: Tue Dec 15 13:41:05 2015 +0000 + + Updated Slovak translation + + po/sk.po | 172 +++++++++++++++++++++++++++++++++++++++++++++++---------------- + 1 file changed, 129 insertions(+), 43 deletions(-) + +commit 6b10cd558965cb786ea7cdb2745c4fab850e1b43 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 14 21:19:19 2015 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c82af8703fd1c3b58cc707ae5214f9d23103c44a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 14 21:09:39 2015 +0100 + + Prepare for release 3.19.3 + + NEWS | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +commit 797da4890311d57024d3216cd90b468986b798cb +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Dec 14 15:15:05 2015 +0000 + + Updated Spanish translation + + po/es.po | 204 +++++++++++++++++++++++++++++++++++++++++++++++++-------------- + 1 file changed, 159 insertions(+), 45 deletions(-) + +commit 6be63e3cfe5145d0b8ee77d24a120d3bd53e9c6d +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Mon Dec 14 03:57:48 2015 +0000 + + Updated Kazakh translation + + po/kk.po | 407 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 249 insertions(+), 158 deletions(-) + +commit d699ab1510b5df5e752983af12eac7a8bee97b0b +Author: Pedro Albuquerque <palbuquerque73@gmail.com> +Date: Sun Dec 13 08:35:08 2015 +0000 + + Updated Portuguese translation + + po/pt.po | 204 +++++++++++++++++++++++++++++++++++++++++++++++++-------------- + 1 file changed, 159 insertions(+), 45 deletions(-) + +commit 0f2ae50a53c4ed6e1add01dd8bfcfb97e43b3e44 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Dec 12 19:21:11 2015 +0100 + + EogApplication: Add shortcuts window + + Use GtkApplication's automatic shortcut window support + via GtkBuilder. + + https://bugzilla.gnome.org/show_bug.cgi?id=757827 + + configure.ac | 4 +- + data/Makefile.am | 1 + + data/help-overlay.ui | 262 ++++++++++++++++++++++++++++++++++++++++++++++++++ + po/POTFILES.in | 1 + + src/eog-application.c | 1 + + src/eog.gresource.xml | 3 + + 6 files changed, 270 insertions(+), 2 deletions(-) + +commit 94772fa9ce438c4fb64abd1a69bccdf5d49d135f +Author: Sebastian Rasmussen <sebras@gmail.com> +Date: Fri Dec 11 07:09:47 2015 +0000 + + Updated Swedish translation + + po/sv.po | 441 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 227 insertions(+), 214 deletions(-) + +commit 3d12445c85b1049a2dc7f933341312d5df7794b1 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 7 20:53:58 2015 +0100 + + Remove unneeded GTK_CHECK_VERSION macros + + eog requires a newer gtk+ version now. + + src/eog-scroll-view.c | 2 -- + src/eog-thumb-nav.c | 3 +-- + 2 files changed, 1 insertion(+), 4 deletions(-) + +commit 84726b96d8c25ddd314cf36fcb0f221548df5a43 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 7 20:50:01 2015 +0100 + + Raise gtk+ dependency to 3.19.2 + + Required for CSS nodes + + https://bugzilla.gnome.org/show_bug.cgi?id=758763 + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a9412e31a274cfd4ff110826fa8f8e493f24accd +Author: Trinh Anh Ngoc <atw1990@gmail.com> +Date: Sat Nov 28 14:21:00 2015 +0700 + + Convert custom theming to use the new CSS nodes + + https://bugzilla.gnome.org/show_bug.cgi?id=758763 + + data/eog.css | 25 ++++++++----------------- + src/eog-thumb-nav.c | 1 + + 2 files changed, 9 insertions(+), 17 deletions(-) + +commit 8f9fae7ac7d7ec636e9ee664591ab986345566f6 +Author: Dušan Kazik <prescott66@gmail.com> +Date: Sun Dec 6 12:46:58 2015 +0000 + + Updated Slovak translation + + po/sk.po | 292 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 147 insertions(+), 145 deletions(-) + +commit 8f23dd921604296c1aa5f61456f95eb16e0bf45e +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Sun Dec 6 13:24:25 2015 +0900 + + Updated Japanese translation + + po/ja.po | 241 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 121 insertions(+), 120 deletions(-) + +commit 23fdc13ba2a6ee9a6cc0c4a0bf12bc0977ab1db2 +Author: Pedro Albuquerque <palbuquerque73@gmail.com> +Date: Sat Nov 28 11:42:03 2015 +0000 + + Updated Portuguese translation + + po/pt.po | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +commit f1bbdb127902b61c5812c644048a33f600323977 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 23 21:03:45 2015 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0bb102cff1e71347a17bb8add44b4e42ffd27238 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 23 21:01:53 2015 +0100 + + Prepare for release 3.19.2 + + NEWS | 22 ++++++++++++++++++++++ + 1 file changed, 22 insertions(+) + +commit 57b2da80ad262ea60842272642bdf9994f1812c0 +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Fri Nov 20 21:33:59 2015 +0200 + + Updated Lithuanian translation + + po/lt.po | 238 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 119 insertions(+), 119 deletions(-) + +commit 02c5f98a1c0e63c514652db3a83ff61fb0ae36f2 +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Thu Nov 19 22:01:40 2015 +0200 + + Updated Hebrew transaltion + + po/he.po | 263 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 132 insertions(+), 131 deletions(-) + +commit 2cc1671b7cccf3ca7f5c6fb43bf1f5a91c54cc28 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Tue Nov 17 18:43:49 2015 +0100 + + Updated Spanish translation + + po/es.po | 3709 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 1856 insertions(+), 1853 deletions(-) + +commit 01fd910d899f13d7d751df890c43dcf750ad7c88 +Author: GNOME Translation Robot <gnome-sysadmin@gnome.org> +Date: Mon Nov 16 15:38:50 2015 +0000 + + Updated Scottish Gaelic translation + + po/gd.po | 1341 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 675 insertions(+), 666 deletions(-) + +commit b734988bedfba2f9f7de1da00adbb4083654f2a3 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Mon Nov 16 07:09:46 2015 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 229 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 112 insertions(+), 117 deletions(-) + +commit e06eaa0c3cf5a5ad8eddddbe7f0198ac52fa4260 +Author: YunQiang Su <yqsu@src.gnome.org> +Date: Sat Nov 14 22:16:28 2015 +0800 + + Us ... instead of … for zh_CN + + po/zh_CN.po | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 8362d7537e1a59e060770a389256d853bed7ec87 +Author: liushuyu <liushuyu_011@126.com> +Date: Sat Nov 14 15:15:43 2015 +0800 + + update zh_CN translation + + po/zh_CN.po | 203 +++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 117 insertions(+), 86 deletions(-) + +commit 774418ef33bad663fd9699fd33e30fdcbb15f135 +Author: Kalev Lember <klember@redhat.com> +Date: Tue Nov 10 12:04:44 2015 +0100 + + Fix a syntax error in desktop file keywords Romanian translation + + po/ro.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8d7032d5f106a0ec1e7b7693d3aedcd49480ede0 +Author: Marek Černocký <marek@manet.cz> +Date: Mon Nov 9 14:48:23 2015 +0100 + + Updated Czech translation + + po/cs.po | 38 +++++++++++++++++++------------------- + 1 file changed, 19 insertions(+), 19 deletions(-) + +commit 001513e63c018db9337be7fd10f44ed4b36202ba +Author: Jiri Grönroos <jiri.gronroos@iki.fi> +Date: Sat Nov 7 13:20:30 2015 +0000 + + Updated Finnish translation + + po/fi.po | 252 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 127 insertions(+), 125 deletions(-) + +commit f06f0e6cc615ab6b5567d0f2112f7938f50c70ac +Author: Pedro Albuquerque <palbuquerque73@gmail.com> +Date: Thu Nov 5 06:50:39 2015 +0000 + + Updated Portuguese translation + + po/pt.po | 270 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 136 insertions(+), 134 deletions(-) + +commit 3c18da911895b67c67fa0479072cb06296eebc30 +Author: Trinh Anh Ngoc <atw1990@gmail.com> +Date: Tue Oct 27 15:19:20 2015 +0700 + + Move window actions to gear menu + + data/eog-app-menu.xml | 14 -------------- + data/eog-gear-menu.ui | 8 ++++++++ + 2 files changed, 8 insertions(+), 14 deletions(-) + +commit c2b0edebe2f19e9d7d2dbf4c445e9745ab3d2c80 +Author: Trinh Anh Ngoc <atw1990@gmail.com> +Date: Tue Oct 27 14:58:55 2015 +0700 + + Tweak gallery ui + + data/eog.css | 24 ++++++++++++++++++++++++ + src/eog-thumb-nav.c | 23 +++++++---------------- + src/eog-window.c | 2 +- + 3 files changed, 32 insertions(+), 17 deletions(-) + +commit d0d42990888d282d5a322ab42b23c1c541d62499 +Author: Trinh Anh Ngoc <atw1990@gmail.com> +Date: Tue Oct 27 13:52:23 2015 +0700 + + Tweak statusbar ui + + data/eog.css | 4 ++++ + src/eog-statusbar.c | 18 +++++------------- + 2 files changed, 9 insertions(+), 13 deletions(-) + +commit 577403b1aabcef05108390d160ce934368cd236d +Author: Trinh Anh Ngoc <atw1990@gmail.com> +Date: Tue Oct 27 12:09:59 2015 +0700 + + Tweak sidebar ui + + data/metadata-sidebar.ui | 3 +++ + src/eog-metadata-sidebar.c | 1 - + src/eog-sidebar.c | 7 +++++-- + 3 files changed, 8 insertions(+), 3 deletions(-) + +commit 1d37f4e9fc6803f5cae647beffd2d6882fb88545 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 26 21:43:39 2015 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c90aa969d70b25491a790ee351003cf52900e19e +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 26 21:40:16 2015 +0100 + + Prepare for release 3.19.1 + + NEWS | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +commit 5e7bc6c3331e46247c954e077ff237be642df83e +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 21 21:12:16 2015 +0200 + + Post-branch version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit bb39a7567a13642614ed45c4ba5dbc33ff40f720 +Author: Daniel Șerbănescu <daniel@serbanescu.dk> +Date: Sun Oct 25 15:38:55 2015 +0100 + + Updated Romanian Translation + + po/ro.po | 1908 ++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 1048 insertions(+), 860 deletions(-) + +commit 3f0f6360bdd59bd4cc3514e9b07cf971b0560262 +Author: Marek Černocký <marek@manet.cz> +Date: Sat Oct 24 22:33:22 2015 +0200 + + Updated Czech translation + + po/cs.po | 189 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 92 insertions(+), 97 deletions(-) + +commit f8308117498e0a927c457d9f23b5a0484dda3eb9 +Author: Trinh Anh Ngoc <atw1990@gmail.com> +Date: Sun Sep 6 09:50:06 2015 +0700 + + Use headerbar in properties dialog + + data/eog-image-properties-dialog.ui | 79 +++++++++++-------------------------- + src/eog-properties-dialog.c | 10 +---- + 2 files changed, 25 insertions(+), 64 deletions(-) + +commit 7da26f5333a074f61ed8b7adb884ad41c70ff0c1 +Author: Trinh Anh Ngoc <atw1990@gmail.com> +Date: Sun Sep 6 08:58:11 2015 +0700 + + Use headerbar in preferences dialog + + data/eog-preferences-dialog.ui | 83 +++++++++++------------------------------- + src/eog-preferences-dialog.c | 1 + + 2 files changed, 23 insertions(+), 61 deletions(-) + +commit 2c5e528a948afd811f3a15936ae746032c1ea892 +Author: Lars Uebernickel <lars.uebernickel@canonical.com> +Date: Tue Sep 29 18:25:08 2015 +0200 + + Put "Exit Fullscreen" button into toolbar + + So that the button has the same background as the toolbar itself. + + https://bugzilla.gnome.org/show_bug.cgi?id=755799 + + data/fullscreen-toolbar.ui | 18 +++++++++++++++++- + src/eog-window.c | 31 +++++-------------------------- + 2 files changed, 22 insertions(+), 27 deletions(-) + +commit 6c8285c58cabefec57784af407d1db2e542fc1af +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Oct 11 16:23:04 2015 +0200 + + EogScrollView: Allow triggering popup menu via Shift+F10 + + https://bugzilla.gnome.org/show_bug.cgi?id=754985 + + src/eog-scroll-view.c | 24 +++++++++++++++++------- + 1 file changed, 17 insertions(+), 7 deletions(-) + +commit 25602162f7332f903f6d3b2f7b57ced5e064fd0e +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Oct 11 15:58:56 2015 +0200 + + EogWindow: Add F10 keyboard shortcut for gear menu + + https://bugzilla.gnome.org/show_bug.cgi?id=754985 + + src/eog-application.c | 1 + + src/eog-window.c | 5 +++++ + 2 files changed, 6 insertions(+) + +commit f0d40b4c7bb6dd7ef40cc5e0c02dd8a11c1a3277 +Author: Pedro Albuquerque <palbuquerque73@gmail.com> +Date: Thu Oct 15 05:50:15 2015 +0000 + + Updated Portuguese translation + + po/pt.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 65498bbafcd619777be5430fddd50903ce347937 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Wed Oct 14 10:39:10 2015 +0200 + + Updated Basque language + + po/eu.po | 181 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 104 insertions(+), 77 deletions(-) + +commit cf429103e1544c8c9de17110a29e1a7e7734dfba +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Sep 29 16:33:42 2015 +0200 + + reload: Only offer reload option if there's something to reload + + https://bugzilla.gnome.org/show_bug.cgi?id=755244 + + plugins/reload/eog-reload-plugin.c | 40 ++++++++++++++++++++++++++++++++++++++ + 1 file changed, 40 insertions(+) + +commit 2a1db34f611768f245aacc785e09b22fca6bfc93 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 28 15:03:43 2015 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c7f6784953636bac6eac8204ec3d3e1edbd1a660 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 28 14:54:52 2015 +0200 + + Prepare for release 3.18.0 + + NEWS | 13 +++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 15 insertions(+), 2 deletions(-) + +commit c5c6be66c9bd85f437db9ca40be9f4f6d3f3d8ff +Author: Trần Ngọc Quân <vnwildman@gmail.com> +Date: Fri Sep 25 14:53:06 2015 +0700 + + Updated Vietnamese translation + + Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com> + + po/vi.po | 188 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 107 insertions(+), 81 deletions(-) + +commit b73499f1617a20a80456aafffa7e075e8d63df30 +Author: Милош Поповић <gpopac@gmail.com> +Date: Tue Sep 22 11:43:38 2015 +0000 + + Updated Serbian Latin translation + + po/sr@latin.po | 205 +++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 111 insertions(+), 94 deletions(-) + +commit fb70c8d5cc2a0b1486fdfb35e8c2f075e3dbdc88 +Author: Милош Поповић <gpopac@gmail.com> +Date: Tue Sep 22 11:42:58 2015 +0000 + + Updated Serbian translation + + po/sr.po | 205 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 111 insertions(+), 94 deletions(-) + +commit a5e387aca27346a9e98862b75596bbe125fd53ec +Author: Ask Hjorth Larsen <asklarsen@gmail.com> +Date: Sun Sep 20 15:04:00 2015 +0000 + + Updated Danish translation + + po/da.po | 224 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 129 insertions(+), 95 deletions(-) + +commit da4afc0f1d1f9a612ec4c4651c447fa02d93b46c +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Fri Sep 18 22:42:13 2015 +0300 + + Updated Latvian translation + + po/lv.po | 187 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 101 insertions(+), 86 deletions(-) + +commit 560fb7f43a2c082353635112d6bc510b489d8fe9 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Fri Sep 18 20:48:15 2015 +0200 + + Update Arabic translation + + po/ar.po | 172 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 100 insertions(+), 72 deletions(-) + +commit 09fc92d2df63c5ef6b0ca8ed2cb348945be0e7fa +Author: Enrico Nicoletto <liverig@gmail.com> +Date: Tue Sep 15 18:02:21 2015 +0000 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 93 ++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 46 insertions(+), 47 deletions(-) + +commit ffeab6da0c347eb02bec7d52ece33723a9195c99 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 14 22:40:02 2015 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 29bfe1076c69d271e7afd0e8e7f549862777c774 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 14 22:37:18 2015 +0200 + + Prepare for release 3.17.92 + + NEWS | 24 ++++++++++++++++++++++++ + 1 file changed, 24 insertions(+) + +commit 25ac50d30a1567f9eed03cfc5551313fbf0162a2 +Author: Marek Černocký <marek@manet.cz> +Date: Mon Sep 14 12:14:41 2015 +0200 + + Updated Czech translation + + po/cs.po | 88 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 44 insertions(+), 44 deletions(-) + +commit 748f38fa0f0673c7313db1a56f8296b9846cb487 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Mon Sep 14 00:31:08 2015 +0900 + + Updated Japanese translation + + po/ja.po | 166 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 95 insertions(+), 71 deletions(-) + +commit 680cd4a9f8636c7d4ca4a6fae2095b15648dfba7 +Author: Arash Mousavi <mousavi.arash@gmail.com> +Date: Sat Sep 12 22:50:03 2015 +0430 + + Update Persian translations + + po/fa.po | 1433 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 691 insertions(+), 742 deletions(-) + +commit 68a5a0d842d993da6957dee74535ee15c8742394 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 11 21:00:19 2015 +0200 + + EogPropertiesDialog: Use standard::display-name when showing the parent + + This simply adapts the changes from commit fff55c6a to the + properties dialog, which shares some code with the EogMetadataSidebar. + + https://bugzilla.gnome.org/show_bug.cgi?id=754731 + + src/eog-properties-dialog.c | 46 +++++++++++++++++++++++++++++++++++++++------ + 1 file changed, 40 insertions(+), 6 deletions(-) + +commit fff55c6afdd1c159c1ec554316fa6170f561cbe1 +Author: Debarshi Ray <debarshir@gnome.org> +Date: Tue Sep 8 18:18:00 2015 +0200 + + EogMetadataSidebar: Use standard::display-name when showing the parent + + https://bugzilla.gnome.org/show_bug.cgi?id=754731 + + src/eog-metadata-sidebar.c | 50 ++++++++++++++++++++++++++++++++++++---------- + 1 file changed, 40 insertions(+), 10 deletions(-) + +commit 3175cec316804c86db3f1c27f788140771ba7a73 +Author: Jiri Grönroos <jiri.gronroos+l10n@iki.fi> +Date: Thu Sep 10 18:43:10 2015 +0300 + + Finnish translation update + + po/fi.po | 180 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 97 insertions(+), 83 deletions(-) + +commit 3667d632bc614ad889086385d5c41c295179def5 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Wed Sep 9 07:27:42 2015 +0000 + + Updated Italian translation + + po/it.po | 168 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 99 insertions(+), 69 deletions(-) + +commit ec50618fd6c58205843bf8c65f665e073229df53 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Tue Sep 8 23:14:08 2015 +0200 + + Updated Slovenian translation + + po/sl.po | 79 +++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 41 insertions(+), 38 deletions(-) + +commit e78293e3b38e89af08f60ccf2816edad4035a733 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Mon Sep 7 19:30:54 2015 +0200 + + Updated Norwegian bokmål translation. + + po/nb.po | 84 +++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 43 insertions(+), 41 deletions(-) + +commit e055e5ba1e4e56706db7f6b0e7648eb2d3b1609f +Author: Muhammet Kara <muhammetk@gmail.com> +Date: Sun Sep 6 03:50:48 2015 +0000 + + Updated Turkish translation + + po/tr.po | 86 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 43 insertions(+), 43 deletions(-) + +commit 684cd81ba6bcbce06f68aa07ccec921401cd656b +Author: Bernd Homuth <dev@hmt.im> +Date: Sat Sep 5 20:27:01 2015 +0000 + + Updated German translation + + po/de.po | 91 +++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 47 insertions(+), 44 deletions(-) + +commit b89e3a791385133c0a406a012a20a367dcf6e862 +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sun Sep 6 02:11:50 2015 +0900 + + Updated Korean translation + + po/ko.po | 164 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 96 insertions(+), 68 deletions(-) + +commit a58760ef5c772bf0b9770fe42a43b311831a7009 +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Fri Sep 4 16:03:40 2015 +0000 + + Updated Kazakh translation + + po/kk.po | 167 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 98 insertions(+), 69 deletions(-) + +commit ad72c0aa41d7d70ff481eff990b49c7058898ed6 +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Thu Sep 3 14:42:04 2015 +0300 + + Updated Lithuanian translation + + po/lt.po | 173 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 99 insertions(+), 74 deletions(-) + +commit 0aa2f827502b1fe9cbab85beb28b61571c319bad +Author: Sveinn í Felli <sv1@fellsnet.is> +Date: Wed Sep 2 16:27:10 2015 +0000 + + Updated Icelandic translation + + po/is.po | 82 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 41 insertions(+), 41 deletions(-) + +commit 01e053bcb28f2c0efd74a452f87ebd8b115d3eca +Author: Alain Lojewski <allomervan@gmail.com> +Date: Tue Sep 1 07:22:37 2015 +0000 + + Updated French translation + + po/fr.po | 28 ++++++++++++++++++---------- + 1 file changed, 18 insertions(+), 10 deletions(-) + +commit 6cc698945a577220092467327702178e011624d5 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 31 22:39:58 2015 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a74888ad8c285c803596d41cf67f052cd9f46507 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 31 22:38:18 2015 +0200 + + Prepare for release 3.17.91 + + NEWS | 27 +++++++++++++++++++++++++++ + 1 file changed, 27 insertions(+) + +commit 1b22c52eaa48a4013df176d116b2b3e33a5586d7 +Author: Emmanuel Pacaud <emmanuel@gnome.org> +Date: Wed Aug 26 09:02:24 2015 +0200 + + Eog: a bunch of instrospection warning fixes + + Eog introspection seems in a need of a complete review. + + src/eog-image.c | 17 +++++++++++++++++ + src/eog-jobs.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ + src/eog-window.c | 9 +++++++++ + 3 files changed, 75 insertions(+) + +commit 04859efbcde4ae38f9f35818dc586a9088b09cb0 +Author: Emmanuel Pacaud <emmanuel@gnome.org> +Date: Wed Aug 26 08:37:11 2015 +0200 + + EogUriConverter: GList leak fix + + A list was created but never freed in eog_uri_converter_check. Fix an + introspection warning in the process. + + src/eog-uri-converter.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +commit 8e03cd2616f0051328b98a4c646de3ec8c212e96 +Author: Emmanuel Pacaud <emmanuel@gnome.org> +Date: Wed Aug 26 02:26:26 2015 +0200 + + EogMetadataDetails: remove deprecated tree rule setting + + As suggested by the GTK documentation, simply remove the call to + gtk_tree_view_set_rules_hint. The metadata tree view is not a good + candidate to the alternate row colors (not wide, not a lot of columns). + + src/eog-metadata-details.c | 2 -- + 1 file changed, 2 deletions(-) + +commit aea640442cfbd198e5dcd0f4155e9c7a248ff702 +Author: Emmanuel Pacaud <emmanuel@gnome.org> +Date: Wed Aug 26 02:11:28 2015 +0200 + + EogScrollView: fix override_background deprecated call + + Do the necessary background drawing in draw callback. + + src/eog-scroll-view.c | 32 +++++++++++++++++--------------- + 1 file changed, 17 insertions(+), 15 deletions(-) + +commit b57ed1a0694bcc95c4f33535cf6c627507b09fb9 +Author: Balázs Úr <urbalazs@gmail.com> +Date: Mon Aug 31 15:51:04 2015 +0000 + + Updated Hungarian translation + + po/hu.po | 46 +++++++++++++++++++++++----------------------- + 1 file changed, 23 insertions(+), 23 deletions(-) + +commit 05db55c5908935dfb044dd9dd4cae400a4c1de00 +Author: Andika Triwidada <andika@gmail.com> +Date: Sun Aug 30 04:39:55 2015 +0000 + + Updated Indonesian translation + + po/id.po | 295 +++++++++++++++++++++++++++++++++++++++++++++------------------ + 1 file changed, 212 insertions(+), 83 deletions(-) + +commit fdbfc18745a88bf1770e1307bc5c3676adb7738b +Author: Tom Tryfonidis <tomtryf@gmail.com> +Date: Fri Aug 28 21:00:25 2015 +0000 + + Updated Greek translation + + po/el.po | 205 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 97 insertions(+), 108 deletions(-) + +commit b099142374f277817e1f0c09c9ef743179184be1 +Author: Emmanuel Pacaud <emmanuel@gnome.org> +Date: Wed Aug 26 01:17:44 2015 +0200 + + EogScrollView: remove gtk_widget_set_style call + + This function does nothing since the dawn of time (3.0 exactly). + + src/eog-scroll-view.c | 14 -------------- + 1 file changed, 14 deletions(-) + +commit a57e788b7ec85cbb9021bbf152c219be2e254ec0 +Author: Emmanuel Pacaud <emmanuel@gnome.org> +Date: Wed Aug 26 01:12:35 2015 +0200 + + EogPropertiesDialog: fix deprecation warnings + + Implementation as suggested in GTK documentation. + + src/eog-properties-dialog.c | 14 ++++++++++---- + 1 file changed, 10 insertions(+), 4 deletions(-) + +commit a48af02cb389d6064947fee7421ba820213429b1 +Author: Emmanuel Pacaud <emmanuel@gnome.org> +Date: Wed Aug 26 01:11:04 2015 +0200 + + EogCloseConfirmationDialog: fix deprecation warning + + This function doesn't seem to be used by eog itself, nor the included + plugins. May be a good candidate for code removal, unless it is a plugin + public API. + + src/eog-close-confirmation-dialog.c | 9 +++++---- + 1 file changed, 5 insertions(+), 4 deletions(-) + +commit ef626dc9094d191d55a9cba854380696cadd7627 +Author: Emmanuel Pacaud <emmanuel@gnome.org> +Date: Tue Aug 25 23:55:33 2015 +0200 + + EogScrollView: remove commented out code + + That's 8 year old code that doesn't help to understand the scroll view + logic. + + src/eog-scroll-view.c | 681 +------------------------------------------------- + 1 file changed, 1 insertion(+), 680 deletions(-) + +commit a78121c99f4056328351ef7c75c516e2d6ccb865 +Author: Yuri Myasoedov <ymyasoedov@yandex.ru> +Date: Fri Aug 28 22:26:22 2015 +0300 + + Updated Russian translation + + po/ru.po | 32 ++++++++++++++++---------------- + 1 file changed, 16 insertions(+), 16 deletions(-) + +commit 2a2a0bfee8821b1760acc917292a4ce8b089d9d4 +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Fri Aug 28 00:11:58 2015 +0300 + + Updated Hebrew translation + + po/he.po | 42 ++++++++++++++++++++++-------------------- + 1 file changed, 22 insertions(+), 20 deletions(-) + +commit e82f7d8a1129801d943d21d78c69f16f93b93c9a +Author: Anders Jonsson <anders.jonsson@norsjovallen.se> +Date: Thu Aug 27 08:27:01 2015 +0000 + + Updated Swedish translation + + po/sv.po | 152 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 88 insertions(+), 64 deletions(-) + +commit ba756abedb4fdfd3b0e5ad1c3189da191243d0ba +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Wed Aug 26 21:38:20 2015 +0200 + + Updated Polish translation + + po/pl.po | 214 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 121 insertions(+), 93 deletions(-) + +commit 9d64e59f1a9e40f2e9c05706ea1c244e0f411225 +Author: Fran Dieguez <fran@openhost.es> +Date: Tue Aug 25 15:54:55 2015 +0200 + + Updated Galician translations + + po/gl.po | 159 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 93 insertions(+), 66 deletions(-) + +commit 76d2cda66cfc42af5c9a1ace9a4711d4a785e04f +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Tue Aug 25 13:02:52 2015 +0000 + + Updated Chinese (Taiwan) translation + + po/zh_TW.po | 160 +++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 93 insertions(+), 67 deletions(-) + +commit 5f732d6ec63d0f3fbfa56899ae8c7de3ec113aba +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Tue Aug 25 11:03:09 2015 +0200 + + Updated Spanish translation + + po/es.po | 3736 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 1868 insertions(+), 1868 deletions(-) + +commit 819bfd2640385f2417cb0c98c025cf6d058403d1 +Author: Pedro Albuquerque <palbuquerque73@gmail.com> +Date: Tue Aug 25 05:20:37 2015 +0000 + + Updated Portuguese translation + + po/pt.po | 26 ++++++++++++-------------- + 1 file changed, 12 insertions(+), 14 deletions(-) + +commit 837710f4e95d409afce12932f9951e97ed00ef22 +Author: Dušan Kazik <prescott66@gmail.com> +Date: Mon Aug 24 16:22:43 2015 +0000 + + Updated Slovak translation + + po/sk.po | 17 ++++++++--------- + 1 file changed, 8 insertions(+), 9 deletions(-) + +commit 509a6ad9155d63f097c2a6c7757e2be48c65bd9a +Author: Dušan Kazik <prescott66@gmail.com> +Date: Mon Aug 24 16:21:20 2015 +0000 + + Updated Slovak translation + + po/sk.po | 40 +++++++++++++++++++++------------------- + 1 file changed, 21 insertions(+), 19 deletions(-) + +commit 78976e7b703b53b50c98228f3a1900bdaa8ec994 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Sun Aug 23 22:38:26 2015 +0900 + + Give access key to button "Open with Document Viewer" + + https://bugzilla.gnome.org/show_bug.cgi?id=753987 + + src/eog-error-message-area.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 1ee4fee534d16d18a558a32488f276362167a172 +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Mon Aug 24 16:17:30 2015 +0000 + + Updated French translation + + po/fr.po | 146 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 84 insertions(+), 62 deletions(-) + +commit 409be1f8c4b2c8c5718d6ae457c6840087629bee +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 17 22:38:00 2015 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c27951164672d8f22f4f79b92c82c0b4784b2f7b +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 17 22:32:51 2015 +0200 + + Prepare for release 3.17.90 + + NEWS | 20 ++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 21 insertions(+), 1 deletion(-) + +commit 456b3664738dac11898e0ee0dea41f4994da1065 +Author: Carlos Garnacho <carlosg@gnome.org> +Date: Fri Aug 14 13:56:00 2015 +0200 + + EogScrollView: Set the event mask bit for touchpad gestures + + This will be enough for the GtkGestureZoom/Rotate gestures to pick + these events and emit the right signals. + + https://bugzilla.gnome.org/show_bug.cgi?id=753627 + + src/eog-scroll-view.c | 3 +++ + 1 file changed, 3 insertions(+) + +commit f9e208350e3f60232186a21b9db52ffadaeef577 +Author: Enrico Nicoletto <liverig@gmail.com> +Date: Tue Aug 11 02:00:38 2015 +0000 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 191 ++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 110 insertions(+), 81 deletions(-) + +commit c4095b36f925a3a283cd06f5327c2d2fd7343fd3 +Author: Andika Triwidada <andika@gmail.com> +Date: Mon Aug 3 07:10:06 2015 +0000 + + Updated Indonesian translation + + po/id.po | 148 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 86 insertions(+), 62 deletions(-) + +commit 1a4b0e8bcb4aba5cca1a5e6aa04babb4cfb026fd +Author: Jordi Mas <jmas@softcatala.org> +Date: Sun Aug 2 23:08:52 2015 +0200 + + Update Catalan translation + + po/ca.po | 152 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 90 insertions(+), 62 deletions(-) + +commit 94578d51c0696f4386407977415f105653f68ed3 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Thu Jul 30 11:43:07 2015 +0200 + + Updated Norwegian bokmål translation. + + po/nb.po | 156 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 91 insertions(+), 65 deletions(-) + +commit e0ab1384b5eeaf4016956b2de6145eda5e68844e +Author: Anders Jonsson <anders.jonsson@norsjovallen.se> +Date: Mon Jul 27 22:34:19 2015 +0000 + + Updated Swedish translation + + help/sv/sv.po | 4775 +++++++++++++++++++++++++++++++++++++++++++++++---------- + 1 file changed, 4002 insertions(+), 773 deletions(-) + +commit 4ebddb9eca3120924521b43fbe5f5ec572e0257c +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Sun Jul 26 18:22:50 2015 +0000 + + Updated Friulian translation + + po/fur.po | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 9bd279a1ac30f29b19eed8a90788fccf8c95bb99 +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Sun Jul 26 09:45:23 2015 +0000 + + Updated Friulian translation + + po/fur.po | 1168 ++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 566 insertions(+), 602 deletions(-) + +commit da2b9f3c1c4e648baf2189b491491393d46d833f +Author: Efstathios Iosifidis <eiosifidis@gnome.org> +Date: Thu Jul 23 09:42:18 2015 +0000 + + Updated Greek translation + + po/el.po | 70 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 35 insertions(+), 35 deletions(-) + +commit d00e421e9f87f004516099c726f1bf5c6c7eaeef +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 20 22:41:35 2015 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 542fe31f10624c520cc85c70decdfd8ec848931c +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 20 22:38:06 2015 +0200 + + Prepare for release 3.17.3 + + NEWS | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +commit be2f2a2c1dd7c6c76a7e10a6332c2ba2d7f7b82e +Author: Sveinn í Felli <sv1@fellsnet.is> +Date: Thu Jul 16 14:16:30 2015 +0000 + + Updated Icelandic translation + + po/is.po | 184 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 108 insertions(+), 76 deletions(-) + +commit 56eaabd2592918ab147a1641414c9c970d17f4dc +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Wed Jul 8 21:56:19 2015 +0200 + + Updated Slovenian translation + + po/sl.po | 155 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 92 insertions(+), 63 deletions(-) + +commit 0e423ff7cc3f1b68f5da6174b30dc73ac211a3cb +Author: Pedro Albuquerque <palbuquerque73@gmail.com> +Date: Sat Jul 4 05:44:03 2015 +0000 + + Updated Portuguese translation + + po/pt.po | 49 +++++++++++++++++-------------------------------- + 1 file changed, 17 insertions(+), 32 deletions(-) + +commit cbb9da83940a95a878663f34ac412df377a3bd19 +Author: Pedro Albuquerque <palbuquerque73@gmail.com> +Date: Mon Jun 29 22:29:21 2015 +0000 + + Updated Portuguese translation + + po/pt.po | 1594 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 800 insertions(+), 794 deletions(-) + +commit b19a229925adabd5be1516e255ffe850027f2e9f +Author: Stas Solovey <whats_up@tut.by> +Date: Tue Jun 23 21:42:45 2015 +0000 + + Updated Russian translation + + po/ru.po | 183 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 97 insertions(+), 86 deletions(-) + +commit 94ce268960076143d7698a93d3d681563db3c927 +Author: Balázs Úr <urbalazs@gmail.com> +Date: Mon Jun 22 20:58:20 2015 +0000 + + Updated Hungarian translation + + po/hu.po | 161 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 95 insertions(+), 66 deletions(-) + +commit 13437eee180bcebcb58b5e1a2e7a46d38fa0c166 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 22 22:22:38 2015 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c4f0dfe3e98232bd4e7675e53d9824610b7f0a5b +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 22 22:15:56 2015 +0200 + + Prepare for release 3.17.2 + + NEWS | 21 +++++++++++++++++++++ + 1 file changed, 21 insertions(+) + +commit 53185ff8c8c57e0630964cef30815dd6cf360622 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 22 21:52:19 2015 +0200 + + EogWindow: Use symbolic leave-fullscreen icon + + https://bugzilla.gnome.org/show_bug.cgi?id=751021 + + src/eog-window.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit e26c7c489b91a27df60a8d09f98ae2b9c219550c +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Fri Jun 19 18:16:31 2015 +0200 + + Remove non-symbolic gallery icon + + It is now useless since we use the symbolic one + + data/icons/16x16/Makefile.am | 1 - + data/icons/16x16/actions/eog-image-gallery.png | Bin 611 -> 0 bytes + data/icons/22x22/Makefile.am | 1 - + data/icons/22x22/actions/eog-image-gallery.png | Bin 653 -> 0 bytes + data/icons/24x24/Makefile.am | 1 - + data/icons/24x24/actions/eog-image-gallery.png | Bin 638 -> 0 bytes + data/icons/32x32/Makefile.am | 2 - + data/icons/32x32/actions/eog-image-gallery.png | Bin 1141 -> 0 bytes + data/icons/scalable/Makefile.am | 1 - + data/icons/scalable/actions/eog-image-gallery.svg | 335 ---------------------- + 10 files changed, 341 deletions(-) + +commit d65a126929978aaed7efb424efa90edae632f49e +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Mon Jun 15 23:59:00 2015 +0200 + + Use symbolic icons for fullscreen toolbar + + data/fullscreen-toolbar.ui | 24 ++--- + data/icons/scalable/Makefile.am | 1 + + .../actions/eog-image-gallery-symbolic.svg | 110 +++++++++++++++++++++ + 3 files changed, 123 insertions(+), 12 deletions(-) + +commit 2cb75ec6e88753a0019d7876fbca57b5fb258edf +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 22 20:29:08 2015 +0200 + + EogWindow: Add stop mark to zoom slider at 100% zoom + + https://bugzilla.gnome.org/show_bug.cgi?id=746132 + + src/eog-window.c | 3 +++ + 1 file changed, 3 insertions(+) + +commit b4b80dbf69de85bfbe6134fb3f667a9d98c084c5 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 22 19:51:25 2015 +0200 + + Fix metadata sidebar with libexif disabled + + Otherwise there would be several labels with the text "label". + + https://bugzilla.gnome.org/show_bug.cgi?id=751007 + + src/eog-metadata-sidebar.c | 27 +++++++++++++++++++++------ + 1 file changed, 21 insertions(+), 6 deletions(-) + +commit d45b7f14f7f95796d7e6fe5c2f9e5f223fe67a1a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 22 19:42:06 2015 +0200 + + Fix API docs build without libexif + + doc/reference/Makefile.am | 2 -- + 1 file changed, 2 deletions(-) + +commit 36d2cba817e87f71bfce132c3f89358fca40855e +Author: Alexandre Rostovtsev <tetromino@gentoo.org> +Date: Tue Jun 16 23:04:32 2015 -0400 + + EogMetadataSidebar: fix --without-libexif build + + https://bugzilla.gnome.org/show_bug.cgi?id=751007 + + src/eog-metadata-sidebar.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit 6e555ab9f4e2b47d605121216aab96713c26f93c +Author: Benjamin Steinwender <b@stbe.at> +Date: Mon Jun 22 17:18:40 2015 +0000 + + Updated German translation + + po/de.po | 162 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 96 insertions(+), 66 deletions(-) + +commit ab514a80c2bdebdfd2a63f2a9667b2ef94327a59 +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Fri Jun 19 19:25:37 2015 +0200 + + Update screenshot + + data/screenshot.png | Bin 68590 -> 64013 bytes + 1 file changed, 0 insertions(+), 0 deletions(-) + +commit 3597c6765e1852db8cb556cf4e3f72a157c0ba96 +Author: Muhammet Kara <muhammetk@gmail.com> +Date: Tue Jun 9 17:16:41 2015 +0000 + + Updated Turkish translation + + po/tr.po | 177 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 96 insertions(+), 81 deletions(-) + +commit 7bad8a45a1485ebf218bf9c88342854deb44eeab +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Mon Jun 8 10:22:14 2015 +0300 + + Updated Greek translation + + po/el.po | 174 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 102 insertions(+), 72 deletions(-) + +commit 4050afa8380262e72a0bf0951e15b2ece45e5a7c +Author: Dušan Kazik <prescott66@gmail.com> +Date: Sun Jun 7 15:41:34 2015 +0000 + + Updated Slovak translation + + po/sk.po | 161 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 96 insertions(+), 65 deletions(-) + +commit d4a8c5f54111a21d875980980af8983c642a3547 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sun Jun 7 05:16:41 2015 +0200 + + Fix two more typos in Canadian English translation + + https://bugzilla.gnome.org/show_bug.cgi?id=741438 + + po/en_CA.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit b2b40676a38f9d11cba87aebe3e7b790069a5a08 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sun Jun 7 05:14:36 2015 +0200 + + Fix typos in Canadian English translation + + https://bugzilla.gnome.org/show_bug.cgi?id=741438 + + po/en_CA.po | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 357a1f1194d98e3e68b00e0e0990f9596e59d764 +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Thu Jun 4 14:16:07 2015 +0300 + + Updated Hebrew translation + + po/he.po | 152 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 88 insertions(+), 64 deletions(-) + +commit 0d6d130e02d8ecd5034fdd0ebefa8b254c7a67a7 +Author: Marek Černocký <marek@manet.cz> +Date: Sun May 31 22:04:39 2015 +0200 + + Updated Czech translation + + po/cs.po | 175 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 95 insertions(+), 80 deletions(-) + +commit c361e30f5bcf966aaaedac3e169f662ea327c762 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Thu May 28 06:32:19 2015 +0000 + + Updated Tajik translation + + po/tg.po | 174 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 94 insertions(+), 80 deletions(-) + +commit fc8fd5c3b7beb245f2cbca222a97d331bbc5f8db +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Tue May 26 19:21:06 2015 +0200 + + Updated Spanish translation + + po/es.po | 159 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 93 insertions(+), 66 deletions(-) + +commit 05e88d7fd42cc3efcae077e72c52ecae43f06c94 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 25 23:09:25 2015 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 46fe572a97c70a0f1207df10ce7c687726ec416a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 25 22:46:47 2015 +0200 + + Prepare for release 3.17.1 + + NEWS | 22 ++++++++++++++++++++++ + 1 file changed, 22 insertions(+) + +commit 6701d73264c124af316730dfb9eb7dc85270ade9 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 25 22:35:16 2015 +0200 + + Make some documented API appear in the docs + + doc/reference/eog-sections.txt | 3 +++ + 1 file changed, 3 insertions(+) + +commit 5bf0e3581e0b79ae217722f35d17f6021cc09871 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 25 19:12:23 2015 +0200 + + Increase zoom level when toggling the zoom button + + Use the steps the zoom logic used in earlier eog versions. + Also add a zoom level at 133% to not have the zoom jump + to 200% when starting at 100% zoom. + + https://bugzilla.gnome.org/show_bug.cgi?id=746802 + + src/eog-scroll-view.c | 2 +- + src/eog-window.c | 1 + + 2 files changed, 2 insertions(+), 1 deletion(-) + +commit f8c70c212e636b9417f5d8d27ed20e05c2260b77 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 25 18:47:14 2015 +0200 + + Notify user when opening a multipage TIFF + + Show an info bar that tries to steer the user to Evince, if available. + This will work if at least gdk-pixbuf-2.31.1 is used. + + https://bugzilla.gnome.org/show_bug.cgi?id=739654 + + src/eog-error-message-area.c | 115 ++++++++++++++++++++++++++++++++++++++----- + src/eog-error-message-area.h | 6 ++- + src/eog-image.c | 30 +++++++++++ + src/eog-image.h | 2 + + src/eog-window.c | 75 +++++++++++++++++++++++----- + 5 files changed, 203 insertions(+), 25 deletions(-) + +commit 3a7c15a2cb20d7d96cdc364616a3839b9f85704a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 25 12:17:06 2015 +0200 + + EogWindow: Add entry for sidebar into gear menu + + https://bugzilla.gnome.org/show_bug.cgi?id=743477 + + data/eog-gear-menu.ui | 4 ++++ + 1 file changed, 4 insertions(+) + +commit 751ae7ffe82afb69066dca7497d3f4f22836482f +Author: Cédric Valmary <cvalmary@yahoo.fr> +Date: Mon May 25 09:32:36 2015 +0000 + + Updated Occitan translation + + po/oc.po | 3887 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 1981 insertions(+), 1906 deletions(-) + +commit c80dcda164a2fad9f7f66ea8083b795ad26bdb09 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat May 23 00:42:03 2015 +0200 + + EogWindow: Always show image area and enabled bars + + This might become necessary if the infobars are relayouted. + The collection bar stays hidden since it doesn't have a nice + appearance if empty. + + https://bugzilla.gnome.org/show_bug.cgi?id=538279 + + src/eog-window.c | 56 ++++++++++++++++++++++++++------------------------------ + 1 file changed, 26 insertions(+), 30 deletions(-) + +commit f75e0935336d24c23cb75f74b13734de4210040c +Author: Felix Riemann <friemann@gnome.org> +Date: Sat May 23 00:32:27 2015 +0200 + + EogWindow: Reuse relayouting code to construct UI layout + + Reduces code duplication. + + src/eog-window.c | 27 ++++++++++++++------------- + 1 file changed, 14 insertions(+), 13 deletions(-) + +commit 40a988301b1f58e74d7f380f0dcdd6828c3b286b +Author: Felix Riemann <friemann@gnome.org> +Date: Sat May 23 00:13:02 2015 +0200 + + EogThumbView: Don't set deprecated follow-state property + + Since gtk+-3.16 the property is ignored. Silences the deprecation warning. + + src/eog-thumb-view.c | 1 - + 1 file changed, 1 deletion(-) + +commit 054055d37a35c2aa5945b9f33d0f4dcfc865bcd3 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri May 22 23:29:50 2015 +0200 + + EogWindow: Hide collection if only one image is available + + This restores the collection's pre-3.16 behaviour. + + src/eog-window.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 2549897af7a0cd3111493de5533d0689826d732e +Author: Felix Riemann <friemann@gnome.org> +Date: Fri May 22 22:45:16 2015 +0200 + + EogMetadataSidebar: Clear folder label if no image is set + + src/eog-metadata-sidebar.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit abe8912634fc05e3b6d09bdd9a98be3bf586357b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 17 17:28:50 2015 +0200 + + EogImage: Make sure to emit size-prepared after applying orientation + + Even if the orientation didn't occur by Exif data. + + https://bugzilla.gnome.org/show_bug.cgi?id=748598 + + src/eog-image.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +commit 5ae0b28eebc18260d01d23481b15bf1201e6ebfd +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 17 16:18:00 2015 +0200 + + EogImage: Fix too early size-prepared emission + + If an image without metadata support is loaded it could happen that + the size-prepared signal was emitted without knowing the actual + image size. That resulted in a smaller than necessary window size. + Remove unneeded emission since the loader will make sure to emit the + signal once the size is known. + + https://bugzilla.gnome.org/show_bug.cgi?id=748598 + + src/eog-image.c | 2 -- + 1 file changed, 2 deletions(-) + +commit a9c9d81405e31443ab51713f6a0712f9bb10e11b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 17 16:13:00 2015 +0200 + + Remove workaround for non-threadsafe pixbuf loaders + + gdk-pixbuf requires loaders to be threadsafe since 2.28 and the + workaround shouldn't be needed anymore. That reduces the complexity + of the image loading code. Require gdk-pixbuf 2.30.0 since that version + is required by GTK+ already. + + configure.ac | 2 +- + src/eog-image-private.h | 1 - + src/eog-image.c | 71 +++++-------------------------------------------- + 3 files changed, 7 insertions(+), 67 deletions(-) + +commit 109109f4e12c66ec0a3861eac61a5251c7fb4ff1 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 17 16:25:51 2015 +0200 + + Post-branch version bump + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 033d8f280d057d39682c226dffc9f0e472d132aa +Author: Jordi Mas <jmas@softcatala.org> +Date: Sat May 16 09:01:46 2015 +0200 + + Fixes to Catalan translation + + help/ca/ca.po | 30 +++++++++++++++--------------- + 1 file changed, 15 insertions(+), 15 deletions(-) + +commit a50138be2e2820d59e4c26d08e875edd976420e5 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed May 13 21:34:07 2015 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit bbd3f92b1be89de56e817a5f089c87f8d31c9c84 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed May 13 19:25:05 2015 +0200 + + Prepare for release 3.16.2 + + NEWS | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +commit 1c296e5cc5a6fc52205273a257a10e626d31315c +Author: Dean Chen <wsxy162@gmail.com> +Date: Sun May 3 10:46:41 2015 +0800 + + update zh_CN translation + + po/zh_CN.po | 1322 +++++++++++++++++++++++++++++------------------------------ + 1 file changed, 644 insertions(+), 678 deletions(-) + +commit 21f7d6b6145c7eecabe6c95c1f0343dbdb62e80e +Author: Kent Vander Velden <kent.vandervelden@gmail.com> +Date: Wed Apr 29 10:31:33 2015 -0500 + + Update progress status bar for all images, valid and invalid. + + The progress status bar (cur / tot) in the lower right was only being updated + when an image was valid, with data. When browsing a directory or otherwise + multiple filenames given to eog, the status bar would only update when visting + valid images. Simply moved update_image_pos(...) outside of the + eog_image_has_data(...) test. + + https://bugzilla.gnome.org/show_bug.cgi?id=748653 + + src/eog-window.c | 47 ++++++++++++++++++++++++----------------------- + 1 file changed, 24 insertions(+), 23 deletions(-) + +commit c20253fc65fa22a0f603e1cff72c0a5d3543dfb1 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Apr 29 21:11:50 2015 +0200 + + icon: Install symbolic app icon into the right location + + Make sure the icon installs into the system data dir instead of the + package data dir. Also fix used icon category. + + https://bugzilla.gnome.org/show_bug.cgi?id=746842 + + data/icons/scalable/Makefile.am | 9 ++++++--- + 1 file changed, 6 insertions(+), 3 deletions(-) + +commit 3179f097357e3a171a445ae8430ee8c87aad0bb7 +Author: Jakub Steiner <jimmac@gmail.com> +Date: Thu Mar 26 19:40:03 2015 +0100 + + icon: provide a symbolic variant of the app icon + + https://bugzilla.gnome.org/show_bug.cgi?id=746842 + + data/icons/scalable/Makefile.am | 3 ++- + data/icons/scalable/apps/eog-symbolic.svg | 25 +++++++++++++++++++++++++ + 2 files changed, 27 insertions(+), 1 deletion(-) + +commit c7d2d7240a4d59ed49e1ad5f90a6bfdb7024782e +Author: Cédric Valmary <cvalmary@yahoo.fr> +Date: Tue Apr 28 13:25:26 2015 +0000 + + Updated Occitan translation + + po/oc.po | 3423 ++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 1906 insertions(+), 1517 deletions(-) + +commit 32b4e4942927ca91ff9ed3ede6bc687c95d99b4b +Author: Sveinn í Felli <sv1@fellsnet.is> +Date: Mon Apr 27 14:37:04 2015 +0000 + + Updated Icelandic translation + + po/is.po | 163 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 92 insertions(+), 71 deletions(-) + +commit 2d9488125360a2a149ddfa6c9d678487ac6f4f41 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Apr 16 23:48:34 2015 +0200 + + EogApplication: Restrore Ctrl+W shortcut for closing windows + + Seems to have gone missing during the GAction migration. + + https://bugzilla.gnome.org/show_bug.cgi?id=747806 + + src/eog-application.c | 1 + + 1 file changed, 1 insertion(+) + +commit d985678fe769e70674bd949b895a0ad00da4ea07 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 13 19:56:27 2015 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0e815bd2a685da7eaa2edb6307a9e01942b235e1 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 13 19:53:43 2015 +0200 + + Prepare for release 3.16.1 + + NEWS | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +commit e52a64c4180c2245d1c484aa1b88fa2d5c9803b8 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Apr 10 21:44:28 2015 +0200 + + EogWindow: Fix feedback loop from zoom scale to scroll view + + Block signal handler to avoid setting the zoom again when the + scroll view sets the zoom on its own. Although the scroll view + will usually ignore these resets it won't do so if the zoom scale + clamps the zoom factor to its own allowed range. + + https://bugzilla.gnome.org/show_bug.cgi?id=747410 + + src/eog-window.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +commit 5c93a17232207c9d7154f9fb80c6ccb9bf35b18c +Author: Hannie Dumoleyn <hannie@ubuntu-nl.org> +Date: Thu Apr 9 10:34:38 2015 +0200 + + Updated Dutch translation 3.16 + + po/nl.po | 687 ++++++++++++++++++++------------------------------------------- + 1 file changed, 220 insertions(+), 467 deletions(-) + +commit a2ba4e3e503adc1eb50c290b15b431e72b88fbf2 +Author: Mattias Põldaru <mahfiaz@gmail.com> +Date: Wed Apr 8 20:26:54 2015 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 729 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 384 insertions(+), 345 deletions(-) + +commit 0bf4da0ad1997e89e8d9c58f6c926055ec27e543 +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Fri Apr 3 20:55:28 2015 +0300 + + Updated Latvian translation + + po/lv.po | 1204 +++++++++++++++++++++++--------------------------------------- + 1 file changed, 452 insertions(+), 752 deletions(-) + +commit ee33862e7cede4fd2ff34e4cfcb4192dfdd52b46 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Mar 26 19:01:05 2015 +0100 + + EogScrollView: Remove unneeded g_assert() + + The code following it is able to handle the situation. + + https://bugzilla.gnome.org/show_bug.cgi?id=735633 + + src/eog-scroll-view.c | 2 -- + 1 file changed, 2 deletions(-) + +commit 396d9524d1d455a24523b89d35f1a01f3955bc60 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Tue Mar 24 10:03:59 2015 +0000 + + Updated Italian translation + + po/it.po | 1150 ++++++++++++++++++++++++-------------------------------------- + 1 file changed, 443 insertions(+), 707 deletions(-) + +commit 01f23c55b9e5ed9f7dd8120ce7f73208e33e661e +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Mon Mar 23 22:16:19 2015 +0200 + + Update Arabic translation + + po/ar.po | 1285 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 625 insertions(+), 660 deletions(-) + +commit 633efdf0a254eed4c0180d111d24b62622c08ba7 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 23 19:57:47 2015 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0ae3a3b321ecf71beb4f0e73303716eb18a9ced6 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 23 19:48:31 2015 +0100 + + Prepare for release 3.16.0 + + NEWS | 14 ++++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 16 insertions(+), 2 deletions(-) + +commit 47545acfd355c7fc06b46d0e72960b1e1125c0ff +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Sat Mar 21 12:21:31 2015 +0100 + + Updated Basque language + + po/eu.po | 388 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 203 insertions(+), 185 deletions(-) + +commit 4153c8a6c7628e2b6cc3dbb7ef062590c7cedf0e +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Mar 19 21:04:17 2015 +0100 + + EogScrollView: Clear overlay timeout on dispose + + Fixes segfaults when closing one of multiple EogWindows or when + application shutdown is delayed. + + https://bugzilla.gnome.org/show_bug.cgi?id=746336 + + src/eog-scroll-view.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit e3123f6bcb6930acfca3734d2ffea723142c43ce +Author: Andika Triwidada <andika@gmail.com> +Date: Wed Mar 18 15:33:03 2015 +0000 + + Updated Indonesian translation + + po/id.po | 1296 ++++++++++++++++++++++---------------------------------------- + 1 file changed, 463 insertions(+), 833 deletions(-) + +commit 476d6030d9f6ddffb118dc71aa4757318d6fa9f4 +Author: Jordi Mas <jmas@softcatala.org> +Date: Wed Mar 18 07:20:33 2015 -0400 + + Update Catalan translation + + po/ca.po | 1291 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 629 insertions(+), 662 deletions(-) + +commit 559fb067fb2541bdf458952fa3fc04eb3b27713c +Author: Daniel Martinez <dmartinez@src.gnome.org> +Date: Tue Mar 17 19:59:39 2015 +0100 + + Update Aragonese translation + + po/an.po | 405 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 208 insertions(+), 197 deletions(-) + +commit 93a1472ec89c897df3e6c9806518011af6bb4943 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 16 23:37:57 2015 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit fc74b0114a4b6defd96ac812a7e009020dc88825 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 16 23:33:03 2015 +0100 + + Prepare for release 3.15.92 + + NEWS | 37 +++++++++++++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 38 insertions(+), 1 deletion(-) + +commit 76740faf9648ad9f071dadaf8f7e014fcf7d90ef +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 16 19:53:04 2015 +0100 + + EogScrollView: Hide the overlay buttons faster + + Reduces the motion timeout to one second and uses more precise + timing as the previous timing could drift by nearly a second. + + https://bugzilla.gnome.org/show_bug.cgi?id=746131 + + src/eog-scroll-view.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 861584c3c796ad1deea28e6cb963e2d13776ec60 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sun Mar 15 23:04:45 2015 +0100 + + Remove Polish help translation + + 4% translated is not worth keeping. + + help/Makefile.am | 2 +- + help/pl/figures/eog_save_as_window.png | Bin 24966 -> 0 bytes + help/pl/figures/eog_start_window.png | Bin 17949 -> 0 bytes + help/pl/figures/eog_toolbar_editor_window.png | Bin 23335 -> 0 bytes + help/pl/pl.po | 987 -------------------------- + 5 files changed, 1 insertion(+), 988 deletions(-) + +commit 4afa1a39cb5073ba48170b8d396c778507a4538e +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Mar 12 19:26:20 2015 +0100 + + EogSidebar: Increase margin at the sides of the sidebar + + https://bugzilla.gnome.org/show_bug.cgi?id=746105 + + src/eog-sidebar.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit 9438d0bb30b374560e318668b82af3a5fb2bf821 +Author: Ask Hjorth Larsen <asklarsen@gmail.com> +Date: Sun Mar 15 16:37:26 2015 +0100 + + Updated Danish translation + + po/da.po | 1300 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 635 insertions(+), 665 deletions(-) + +commit 3791854431b549720d3eea53186ff49b59120e88 +Author: A S Alam <aalam@users.sf.net> +Date: Fri Mar 13 22:55:00 2015 -0500 + + Translation pa updated for Gnome + + po/pa.po | 1298 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 636 insertions(+), 662 deletions(-) + +commit c34bf4e27a4e85a1b5465469797c023214dd8730 +Author: Samir Ribic <samir.ribic@etf.unsa.ba> +Date: Fri Mar 13 15:54:12 2015 +0000 + + Updated Bosnian translation + + po/bs.po | 1731 ++++++++++++++++++++++++++++++++++++++++++++------------------ + 1 file changed, 1237 insertions(+), 494 deletions(-) + +commit 96d12556d519f1a32b2216c9676b31e5b15481c1 +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Fri Mar 13 05:52:28 2015 +0000 + + Updated Kazakh translation + + po/kk.po | 50 ++++++++++++++++++++++++++++++++++++++++++-------- + 1 file changed, 42 insertions(+), 8 deletions(-) + +commit 229f49c8f3a54fda9e22fdc11df55e3b4f9c6928 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Mar 12 19:25:11 2015 +0100 + + EogScrollView: Make zoom factor defines internal again + + These turned out to not be needed in a global context. + Avoids introspection warnings for these values. + + src/eog-scroll-view.c | 10 ++++++++++ + src/eog-scroll-view.h | 10 ---------- + 2 files changed, 10 insertions(+), 10 deletions(-) + +commit c7e606c5042a59e28e7d054eedf393f012cefdc0 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Mar 12 19:24:30 2015 +0100 + + Remove unneeded define from Makefile + + src/Makefile.am | 1 - + 1 file changed, 1 deletion(-) + +commit d97596f1a51d63f69b890b8e203ef73c6c47706b +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Thu Mar 12 05:10:20 2015 +0000 + + Updated Tajik translation + + po/tg.po | 1334 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 657 insertions(+), 677 deletions(-) + +commit aafc70215ecf368a67f1eeeba157be53704c1204 +Author: Alexander Shopov <ash@kambanaria.org> +Date: Wed Mar 11 21:24:48 2015 +0200 + + Updated Bulgarian translation + + po/bg.po | 938 +++++++++++++++++++++++---------------------------------------- + 1 file changed, 347 insertions(+), 591 deletions(-) + +commit a53e76238a556ff2cead82dab6e8b313486577a9 +Author: Jiri Grönroos <jiri.gronroos+l10n@iki.fi> +Date: Wed Mar 11 16:53:52 2015 +0200 + + Finnish translation update + + po/fi.po | 1117 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 548 insertions(+), 569 deletions(-) + +commit c63781735b3cdb4fc2d63dbf02823884ab0cd11d +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Wed Mar 11 12:21:53 2015 +0000 + + Updated Kazakh translation + + po/kk.po | 53 +++++++++++++++++++++++++++++++++++++---------------- + 1 file changed, 37 insertions(+), 16 deletions(-) + +commit d719b73fd5fad0baa9270c70d7facd1fe3ec2e62 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Mon Mar 9 16:28:11 2015 +0100 + + tests: update screenshot tour + + tests/common_steps.py | 2 +- + tests/screenshot_tour.feature | 14 ++++---------- + tests/steps/steps.py | 18 +++++++++--------- + 3 files changed, 14 insertions(+), 20 deletions(-) + +commit 6d97d9dcadede3492417bf9202f26bdb90fb0e59 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Mon Mar 9 16:01:09 2015 +0100 + + tests: fix Fullscreen tests + + Fullscreen button moved to headerbar + Detect fullscreen state by drawing area by position + + tests/actions.feature | 2 +- + tests/steps/steps.py | 11 ++++++----- + 2 files changed, 7 insertions(+), 6 deletions(-) + +commit 0ef2319fb9340b0c7983dfe483ddcfb1178c8ee7 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Mon Mar 9 15:51:10 2015 +0100 + + tests: use GApp menu to toggle side pane + + tests/actions.feature | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 2b7041a7813e8b14bcecaade558f42161ca91f06 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Mon Mar 9 15:48:13 2015 +0100 + + tests: fix 'Rotate the image clockwise' step + + tests/steps/steps.py | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +commit 271dd0167751147901caf55627c52bba7237b9bc +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Mon Mar 9 15:33:21 2015 +0100 + + tests: fix image size detection step + + Since eog doesn't provide labellee for table cell we have to + hardcode the size cell number + + tests/steps/steps.py | 15 ++++++++------- + 1 file changed, 8 insertions(+), 7 deletions(-) + +commit 6526c6446ec5f3ff21c4717e3c80a6e289d853c1 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Mon Mar 9 15:06:56 2015 +0100 + + tests: fix About test + + tests/common_steps.py | 20 +++++++++++++++++++- + tests/steps/steps.py | 5 +++-- + 2 files changed, 22 insertions(+), 3 deletions(-) + +commit c3007b5de089c1f7308c8b01b504e9e54ffc72f6 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sun Mar 8 21:21:58 2015 +0100 + + Updated Slovenian translation + + po/sl.po | 1330 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 650 insertions(+), 680 deletions(-) + +commit b1133665bdb9591ee124ed853590d4fcde99204e +Author: Trần Ngọc Quân <vnwildman@gmail.com> +Date: Sun Mar 8 07:25:01 2015 +0700 + + Updated Vietnamese translation + + Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com> + + po/vi.po | 430 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 230 insertions(+), 200 deletions(-) + +commit 589ab5a1f192564fc63da6ed75fa8396811df059 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Sat Mar 7 22:41:31 2015 +0900 + + l10n: Update Japanese translation + + po/ja.po | 1180 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 572 insertions(+), 608 deletions(-) + +commit b57cbb04517caf1d7a68f36f4a2b87745242c7bc +Author: Changwoo Ryu <cwryu@debian.org> +Date: Thu Mar 5 19:01:30 2015 +0900 + + Updated Korean translation + + po/ko.po | 1164 +++++++++++++++++++++++++------------------------------------- + 1 file changed, 476 insertions(+), 688 deletions(-) + +commit 7829e573cc0555e0308337676ca41b9cbbe9f2fb +Author: Paweł Żołnowski <pawel@zolnowski.name> +Date: Wed Mar 4 23:38:50 2015 +0100 + + Updated Polish translation + + po/pl.po | 1134 +++++++++++++++++++++++++------------------------------------- + 1 file changed, 447 insertions(+), 687 deletions(-) + +commit a94b75efb7858d87b9ad8796cff2d10c58cb9b37 +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Tue Mar 3 19:01:33 2015 +0100 + + Updated Serbian translation + + po/sr.po | 1317 ++++++++++++++++++++++++++++---------------------------- + po/sr@latin.po | 1317 ++++++++++++++++++++++++++++---------------------------- + 2 files changed, 1294 insertions(+), 1340 deletions(-) + +commit 544f49252156947d75a227c4b87e8ad57286d42b +Author: Fran Dieguez <fran.dieguez@mabishu.com> +Date: Tue Mar 3 01:23:12 2015 +0100 + + Updated Galician translations + + po/gl.po | 429 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 229 insertions(+), 200 deletions(-) + +commit 4a39d4cf546cb328b3e1563d2d17c4ecf48ea54b +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Sat Feb 28 17:41:36 2015 +0000 + + Updated Kazakh translation + + po/kk.po | 1067 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 512 insertions(+), 555 deletions(-) + +commit 4f081d472514c9f448c69b534438cdf688083f98 +Author: Anders Jonsson <anders.jonsson@norsjovallen.se> +Date: Wed Feb 25 21:06:51 2015 +0000 + + Updated Swedish translation + + po/sv.po | 2231 ++++++++++++++++++-------------------------------------------- + 1 file changed, 655 insertions(+), 1576 deletions(-) + +commit 386e730c91bed8ec11c11cbed45e79802ee595ba +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Wed Feb 25 00:40:32 2015 +0200 + + Updated Hebrew translation + + po/he.po | 96 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 48 insertions(+), 48 deletions(-) + +commit 0df984ec0c81ac324ec9bf94e0449f4847501374 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Feb 24 19:49:43 2015 +0100 + + EogScrollView: Add margin to both sides of the overlaid buttons + + Should avoid clipping the buttons in RTL locales + + https://bugzilla.gnome.org/show_bug.cgi?id=745077 + + src/eog-scroll-view.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit e60998a7fecfd009d47a066fb84db89e370d150c +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Mon Feb 23 23:29:06 2015 +0200 + + Updated Lithuanian translation + + po/lt.po | 378 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 213 insertions(+), 165 deletions(-) + +commit 13af4c22dcf69701c3d8931865041b4dbbbaa6c7 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Mon Feb 23 07:25:50 2015 +0000 + + Updated Chinese (Taiwan) translation + + po/zh_TW.po | 221 ++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 117 insertions(+), 104 deletions(-) + +commit 359014d7de97441c26a6aaad4ee7b4cd582c2506 +Author: Claude Paroz <claude@2xlibre.net> +Date: Sun Feb 22 15:00:28 2015 +0100 + + Updated French translation + + po/fr.po | 1292 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 617 insertions(+), 675 deletions(-) + +commit 95a2acda9614bfbd02771a11848f3bb0fbbbce65 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Sat Feb 21 10:19:49 2015 +0000 + + Updated Chinese (Taiwan) translation + + po/zh_TW.po | 1301 ++++++++++++++++++++++++++++------------------------------- + 1 file changed, 626 insertions(+), 675 deletions(-) + +commit d7c63bf29154f0f713bb1cff66395255affc96e4 +Author: Wolfgang Stöggl <c72578@yahoo.de> +Date: Sat Feb 21 08:27:49 2015 +0000 + + Updated German translation + + po/de.po | 1312 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 636 insertions(+), 676 deletions(-) + +commit 928d1587ba6e403212ea46823b7b6f678e23292b +Author: Muhammet Kara <muhammetk@gmail.com> +Date: Fri Feb 20 13:37:19 2015 +0000 + + Updated Turkish translation + + po/tr.po | 1203 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 591 insertions(+), 612 deletions(-) + +commit 2a2abd94f43f5867e78f495f816f4889624e92fd +Author: Sveinn í Felli <sv1@fellsnet.is> +Date: Tue Feb 17 04:31:18 2015 +0000 + + Updated Icelandic translation + + po/is.po | 331 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 162 insertions(+), 169 deletions(-) + +commit 532f6de91ed304344d55040a59486c295dba6c54 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 16 22:11:27 2015 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 189e81e9efaf5634e5ec90612d8e19d2500d1786 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 16 22:08:43 2015 +0100 + + Prepare for release 3.15.90 + + NEWS | 26 ++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 27 insertions(+), 1 deletion(-) + +commit 9d9f6b0e84a174cc32dc1b7af3226ca9e2d15ba9 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 16 21:58:38 2015 +0100 + + EogWindow: Make the zoom button follow the view's mode + + src/eog-window.c | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +commit 5159ed15a794b0906e23f008fc3c9aede1d84993 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 15 17:34:41 2015 +0100 + + EogWindow: Remove GtkUIManager + + Not needed anymore after the GAction port. + + src/eog-window.c | 18 ------------------ + src/eog-window.h | 1 - + 2 files changed, 19 deletions(-) + +commit 144479e35c0cd7654542cca44164f62c8eedc459 +Author: Efstathios Iosifidis <iefstathios@gmail.com> +Date: Sat Feb 14 16:59:43 2015 +0200 + + Updated Greek translation + + po/el.po | 431 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 219 insertions(+), 212 deletions(-) + +commit a1be594ab735ad759214bd64203f7701a1940105 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Feb 12 20:45:18 2015 +0100 + + reload: Fix typo causing the plugin to remove the wrong menu entries + + plugins/reload/eog-reload-plugin.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +commit d7e0cd7d2b47ea5cb2ce776448d5809da78e3f16 +Author: Kristjan SCHMIDT <kristjan.schmidt@googlemail.com> +Date: Wed Feb 11 22:34:03 2015 +0100 + + Updated Esperanto translation + + po/eo.po | 1497 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 766 insertions(+), 731 deletions(-) + +commit a0ed3fe8f266539b583d0f22accb4408adce22cc +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Tue Feb 10 22:56:30 2015 +0200 + + Updated Ukrainian translation + + po/uk.po | 1313 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 643 insertions(+), 670 deletions(-) + +commit 4fb6b450a8dd2fedd6dc7561400f39b608330463 +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Tue Feb 10 00:01:46 2015 +0200 + + Updated Hebrew translation + + po/he.po | 255 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 133 insertions(+), 122 deletions(-) + +commit 00daaa2677df900a999dc514be10edd2522faeca +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Feb 9 20:11:25 2015 +0100 + + Updated Spanish translation + + po/es.po | 222 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 118 insertions(+), 104 deletions(-) + +commit 4e083c73743640f3bf5923178edd267816957ec9 +Author: Dušan Kazik <prescott66@gmail.com> +Date: Mon Feb 9 18:20:01 2015 +0000 + + Updated Slovak translation + + po/sk.po | 297 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 155 insertions(+), 142 deletions(-) + +commit 15b47994ab66d9f6fb5ea76ea6dc82a478c28335 +Author: Balázs Úr <urbalazs@gmail.com> +Date: Sun Feb 8 20:14:16 2015 +0000 + + Updated Hungarian translation + + po/hu.po | 215 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 114 insertions(+), 101 deletions(-) + +commit d49b0858293511793761a947bec604466f6a9751 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sun Feb 8 19:43:34 2015 +0100 + + Updated Norwegian bokmål translation from Åka Sikrom. + + po/nb.po | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +commit 92f5853f379fdf338e199edc185b388777a0e58e +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sun Feb 8 19:41:26 2015 +0100 + + Updated Norwegian bokmål translation from Åka Sikrom. + + po/nb.po | 1166 +++++++++++++++++++++++++------------------------------------- + 1 file changed, 466 insertions(+), 700 deletions(-) + +commit 182a8d9f48bd8f408571bce0dca880eb70ce13a2 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 8 15:21:30 2015 +0100 + + EogWindow: Add proper introspection keywords for gear menu lookup + + Otherwise Python plugins aren't able to add menu entries. + + src/eog-window.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +commit 37bc7f00ffdc23015dcd3d5f70dcde1b79f3c957 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 8 13:06:16 2015 +0100 + + Hide statusbar by default + + If everything works out it can be removed in one of the next + releases. + + data/org.gnome.eog.gschema.xml.in | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 10197a531613e84ac0d6675dda95b332c8731280 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Feb 7 14:45:08 2015 +0100 + + Remove the external editor settings key + + The external editor button got removed during the UI overhaul. + + data/org.gnome.eog.gschema.xml.in | 21 ++++++++------------- + src/eog-config-keys.h | 1 - + 2 files changed, 8 insertions(+), 14 deletions(-) + +commit bf1c47d376eb86283cffe47d98263e4c82f9b29b +Author: Stas Solovey <whats_up@tut.by> +Date: Fri Feb 6 12:14:20 2015 +0000 + + Updated Russian translation + + po/ru.po | 167 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 106 insertions(+), 61 deletions(-) + +commit 9313035f467e7dd54f4001facc941cd96c7d2732 +Author: Marek Černocký <marek@manet.cz> +Date: Thu Feb 5 13:57:27 2015 +0100 + + Updated Czech translation + + po/cs.po | 150 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 95 insertions(+), 55 deletions(-) + +commit c4eea92745c48d9f4d4e9cacb628c7586412fec4 +Author: Rafael Ferreira <rafael.f.f1@gmail.com> +Date: Thu Feb 5 10:02:27 2015 +0000 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 178 ++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 96 insertions(+), 82 deletions(-) + +commit 0522b176ef0b2cd1b27d64378aae4fd0ecf34fa2 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 4 21:38:30 2015 +0100 + + EogWindow: Add tooltip to zoom button + + https://bugzilla.gnome.org/show_bug.cgi?id=743887 + + src/eog-window.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +commit 0492b8b90a5752b49ad6852209b8620025f05f4c +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 4 20:55:27 2015 +0100 + + EogWindow: Restore tooltips in fullscreen toolbar + + Reuse tooltip text from eog-3.14. + + https://bugzilla.gnome.org/show_bug.cgi?id=743887 + + data/fullscreen-toolbar.ui | 12 ++++++++++++ + src/eog-window.c | 5 +++++ + 2 files changed, 17 insertions(+) + +commit 4b1451c8a6f3a708f250eea43533cbb9341c7f01 +Author: Diogo Campos <diogocamposwd@gmail.com> +Date: Wed Feb 4 19:51:58 2015 +0000 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 314 ++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 165 insertions(+), 149 deletions(-) + +commit e7d1acaae02405c569b1d3be815a72182a0217fd +Author: Sveinn í Felli <sv1@fellsnet.is> +Date: Wed Feb 4 17:49:25 2015 +0000 + + Updated Icelandic translation + + po/is.po | 39 ++++++++++++++++++++------------------- + 1 file changed, 20 insertions(+), 19 deletions(-) + +commit 60885d1914fad990a220c10fbb5116a1a9b08cf0 +Author: Marek Černocký <marek@manet.cz> +Date: Tue Feb 3 22:04:59 2015 +0100 + + Updated Czech translation + + po/cs.po | 249 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 132 insertions(+), 117 deletions(-) + +commit f5f35a598e71c6b38b92c88b592b415f534b3aa4 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 2 21:06:55 2015 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a4d5c7fda197c223b3b30956577f2e7fa0bdba9a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 2 21:04:37 2015 +0100 + + Update for release 3.15.1 + + NEWS | 35 +++++++++++++++++++++++++++++++++++ + 1 file changed, 35 insertions(+) + +commit a86c990b8fff9714a313070d65d287879d45a875 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 2 20:36:17 2015 +0100 + + EogWindow: Cleanups for 254f4ba4 + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 8 ++------ + 1 file changed, 2 insertions(+), 6 deletions(-) + +commit 254f4ba40788749948f1740291ccb942733493c3 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Sat Jan 31 18:25:00 2015 +0100 + + EogWindow: make the Open With submenu work + + The editor_app has been removed, since it will cause all entries in + the submenu to be disabled. The editor application should be listed + amongst the entries anyway, so it made no sense keeping it. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + https://bugzilla.gnome.org/show_bug.cgi?id=740426 + + data/eog-gear-menu.ui | 5 +- + data/popup-menus.ui | 3 +- + src/eog-window.c | 305 +++++++++++++++++--------------------------------- + 3 files changed, 109 insertions(+), 204 deletions(-) + +commit ba57d4aa20260caf3f0f7e506bcdbf986ae03553 +Author: Sveinn í Felli <sv1@fellsnet.is> +Date: Mon Feb 2 11:05:14 2015 +0000 + + Updated Icelandic translation + + po/is.po | 1893 ++++++++++++++++++++++++++++++++++++++++++++------------------ + 1 file changed, 1345 insertions(+), 548 deletions(-) + +commit eb8c706cbd2754f9487adb87e63c4d26ddd98481 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Feb 2 11:54:03 2015 +0100 + + Updated Spanish translation + + po/es.po | 282 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 143 insertions(+), 139 deletions(-) + +commit e26f5629eb11f6dc22f6172876397b809b1bad7e +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jan 31 16:09:01 2015 +0100 + + reload: Fix memory leak in menu cleanup code + + plugins/reload/eog-reload-plugin.c | 16 ++++++++++------ + 1 file changed, 10 insertions(+), 6 deletions(-) + +commit 44cbe596bd3e17f062dd332d04d104d563dd7577 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jan 31 15:37:15 2015 +0100 + + EogWindow: Fix leaking gear menu builder + + src/eog-window.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit 341e8b6e688bba0654f30cd40cb8d1eefbf556d3 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 30 23:30:55 2015 +0100 + + reload: Update to GAction + + Menu handling as shown in the GTK+ plugman example. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + plugins/reload/eog-reload-plugin.c | 134 ++++++++++++++++++-------------- + plugins/reload/reload.plugin.desktop.in | 2 +- + 2 files changed, 78 insertions(+), 58 deletions(-) + +commit 8b74808890afdff86f01e4b2748f3e4733068937 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 30 22:58:18 2015 +0100 + + EogWindow: Allow plugin entries in gear menu + + Based on the corresponding feature in Totem. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + data/eog-gear-menu.ui | 1 + + src/eog-window.c | 18 +++++++++++++++++- + src/eog-window.h | 3 +++ + 3 files changed, 21 insertions(+), 1 deletion(-) + +commit ad1c325ecea47d1fd7d16f8a564c75971850c481 +Author: Balázs Úr <urbalazs@gmail.com> +Date: Fri Jan 30 20:38:54 2015 +0000 + + Updated Hungarian translation + + po/hu.po | 279 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 142 insertions(+), 137 deletions(-) + +commit 3dab203da36d5d2ff63fec7e146ce27606701cf4 +Author: Stas Solovey <whats_up@tut.by> +Date: Thu Jan 29 22:17:56 2015 +0000 + + Updated Russian translation + + po/ru.po | 298 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 159 insertions(+), 139 deletions(-) + +commit c90bfa65c9c5494aea308fa889ff89e1c28c8804 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 28 21:10:33 2015 +0100 + + EogWindow: Try a different range for the zoom scale + + This is a first try to tame it. + + src/eog-window.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +commit 9e6547c519eccaca6abafd7f1a62bec8488be62f +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 28 21:02:45 2015 +0100 + + EogWindow: Update gear menu + + First improvements following suggestions by Allan Day. + + data/eog-gear-menu.ui | 88 +++++++++++++++++++++++++++------------------------ + 1 file changed, 47 insertions(+), 41 deletions(-) + +commit 366b3b1a62a1022116430b6ac17ecf2e3c77048e +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 28 20:49:03 2015 +0100 + + EogWindow: Disable zoom button if no image is loaded + + src/eog-window.c | 5 +++++ + 1 file changed, 5 insertions(+) + +commit febad1aed4966798f99726c91dbddb945d84e9eb +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 28 19:47:20 2015 +0100 + + Remove unneeded subsection in the app menu + + data/eog-app-menu.xml | 42 +++++++++++++++++++----------------------- + 1 file changed, 19 insertions(+), 23 deletions(-) + +commit b1dd9bf9d41e6c184f6b0e1c26155314d9798282 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 28 19:39:13 2015 +0100 + + EogScrollView: Visually merge the overlaid rotate buttons + + Incorporating UI feedback from Allan Day. + + src/eog-scroll-view.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit 963d754d5008f311c44f8a36dde36c142867e91e +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 28 19:32:35 2015 +0100 + + EogScrollView: Make overlay buttons use the 'osd' style class + + src/eog-scroll-view.c | 9 ++++++++- + 1 file changed, 8 insertions(+), 1 deletion(-) + +commit e8f207ec85a94e6fb2ab378e472e9cddca45fe33 +Author: Dušan Kazik <prescott66@gmail.com> +Date: Tue Jan 27 16:27:22 2015 +0000 + + Updated Slovak translation + + po/sk.po | 1379 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 673 insertions(+), 706 deletions(-) + +commit 2370d5c82163be83750c4173ac679761c78c8763 +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Mon Jan 26 22:42:52 2015 +0200 + + Updated Hebrew translation + + po/he.po | 10 +++++++--- + 1 file changed, 7 insertions(+), 3 deletions(-) + +commit a5bd8eccdaebc8c14484ac39c0b5c0133a839cb9 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 26 20:21:41 2015 +0100 + + EogWindow: Simplify metadata sidebar title + + src/eog-window.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a986da9208e865fe1f76f2e0412a3d7016b1b83f +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Mon Jan 26 21:09:37 2015 +0200 + + Updated Hebrew translation + + po/he.po | 257 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 131 insertions(+), 126 deletions(-) + +commit bf4085fa5d21ce184c33f290e12d35af5e67301b +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sat Jan 24 20:58:58 2015 +0100 + + Updated POTFILES.in + + po/POTFILES.in | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit a898c26195d9f643821c44280b84b818ae0d0191 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jan 24 18:47:25 2015 +0100 + + EogScrollView: Add tooltips to overlaid buttons + + src/eog-scroll-view.c | 17 ++++++++++++++--- + 1 file changed, 14 insertions(+), 3 deletions(-) + +commit 09f08726398111c9e8fcf2c25ac43110a5f4c560 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jan 24 18:39:56 2015 +0100 + + EogScrollView: Hide and reveal the overlay buttons by mouse movement + + src/eog-scroll-view.c | 94 +++++++++++++++++++++++++++++++++++++++++++++++---- + 1 file changed, 88 insertions(+), 6 deletions(-) + +commit c3f1ba2a6317dd3698492964efdaae688c41a911 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jan 24 17:38:01 2015 +0100 + + EogScrollView: Add overlay buttons to switch images + + Revealing and hiding is not yet active. + + data/eog.css | 9 +++++ + src/eog-scroll-view.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++-- + 2 files changed, 100 insertions(+), 2 deletions(-) + +commit 828bd784b1ae0ff3251db9854ec61d6b29dfd42c +Author: Daniel Martinez <dmartinez@src.gnome.org> +Date: Thu Jan 22 19:44:35 2015 +0100 + + Update Aragonese translation + + po/an.po | 946 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 453 insertions(+), 493 deletions(-) + +commit 1c4522852d89c43ac26559a8734ab984e17bf68f +Author: Marek Černocký <marek@manet.cz> +Date: Wed Jan 21 08:00:06 2015 +0100 + + Updated Czech translation + + po/cs.po | 133 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 73 insertions(+), 60 deletions(-) + +commit 94ceb3d5679c89a099717c3b7dc741c0558c1adb +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Sat Jan 17 18:21:27 2015 +0100 + + EogWindow: remove the Recent Images submenu + + It creates more issues than it's worth, as explained in + https://bugzilla.gnome.org/show_bug.cgi?id=741050#c51 + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + https://bugzilla.gnome.org/show_bug.cgi?id=740426 + + data/eog-gear-menu.ui | 6 -- + src/eog-window.c | 238 -------------------------------------------------- + 2 files changed, 244 deletions(-) + +commit 936754d7de440d12f66839cf8651454b9bece9e8 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Jan 19 18:21:45 2015 +0100 + + Updated Spanish translation + + po/es.po | 158 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 81 insertions(+), 77 deletions(-) + +commit dbe4fe97ed016077f211484b1357024d6629db42 +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Sun Jan 18 22:03:33 2015 +0200 + + Updated Greek translation + + po/el.po | 973 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 470 insertions(+), 503 deletions(-) + +commit 2712b8e0383469461af96e58dacc703a4f682e6a +Author: Balázs Úr <urbalazs@gmail.com> +Date: Sun Jan 18 17:45:55 2015 +0000 + + Updated Hungarian translation + + po/hu.po | 161 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 82 insertions(+), 79 deletions(-) + +commit cc19771f7fa7e5824aad8082c5808ea1d810e2d1 +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Sat Jan 17 22:04:12 2015 +0200 + + Updated Lithuanian translation + + po/lt.po | 994 +++++++++++++++++++++++---------------------------------------- + 1 file changed, 364 insertions(+), 630 deletions(-) + +commit adce09fdd4efb0949e101effb7c24e5ec12d7dda +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Sat Jan 17 14:12:46 2015 +0100 + + Updated Basque language + + po/eu.po | 249 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 144 insertions(+), 105 deletions(-) + +commit 17f54b47eb920fbd20acaf40b9b2a90d9f6bea2d +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jan 17 12:58:56 2015 +0100 + + EogWindow: Fix some overindented function parameters + + src/eog-window.c | 92 ++++++++++++++++++++++++++++---------------------------- + 1 file changed, 46 insertions(+), 46 deletions(-) + +commit 5b9f6f5e8e4b14c39b35dbd4b31712ffd0a2bf04 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 16 22:20:13 2015 +0100 + + EogSidebar: Center and reformat page selector + + data/eog.css | 4 ++++ + src/eog-sidebar.c | 23 ++++++++++++++++++++--- + 2 files changed, 24 insertions(+), 3 deletions(-) + +commit fec0939df2d96ea2eac3e5ee68540a262ea99302 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jan 15 23:27:51 2015 +0100 + + EogMetadataSidebar: Fix leaked strings + + src/eog-metadata-sidebar.c | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +commit a54b3a803c0721b518b8867ceede418d1dce720e +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jan 15 23:03:39 2015 +0100 + + EogWindow: Set file open dialog transient for its parent window + + src/eog-window.c | 13 +++++++------ + 1 file changed, 7 insertions(+), 6 deletions(-) + +commit db3a16e905d106d6e88d7a205c12f2dc51c92b99 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jan 15 22:47:29 2015 +0100 + + EogSidebar: Set orientation property via g_object_new + + src/eog-sidebar.c | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +commit 10a6c5f6e9916caa3a7a6af1d3bbffc99c4a2169 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jan 15 21:54:50 2015 +0100 + + Fix duplicate underscore accelerators in gear menu + + https://bugzilla.gnome.org/show_bug.cgi?id=740426 + + data/eog-gear-menu.ui | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit af0def5f1cba5b718e98320686fe6f98ddfa92a0 +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Thu Jan 15 00:41:32 2015 +0200 + + Updated Hebrew translation + + po/he.po | 1139 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 546 insertions(+), 593 deletions(-) + +commit 9156ad9b33e9da27dddd5182637c74b75614d9d2 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 14 23:29:54 2015 +0100 + + Add new UI file to POTFILES.in + + https://bugzilla.gnome.org/show_bug.cgi?id=740426 + + po/POTFILES.in | 1 + + 1 file changed, 1 insertion(+) + +commit de5ee93aa325bc29a2e00e8d874af97cebb10cd6 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Wed Jan 14 23:09:31 2015 +0100 + + EogWindow: implement headerbar + + https://bugzilla.gnome.org/show_bug.cgi?id=740426 + + data/Makefile.am | 1 + + data/eog-gear-menu.ui | 49 +++++++++++++++++ + src/eog-scroll-view.c | 10 ---- + src/eog-scroll-view.h | 10 ++++ + src/eog-window.c | 146 +++++++++++++++++++++++++++++++++++++++++++++++--- + src/eog.gresource.xml | 1 + + 6 files changed, 200 insertions(+), 17 deletions(-) + +commit 9b3d863db9ddaefcaa726b15c7f755c5b554744b +Author: Trần Ngọc Quân <vnwildman@gmail.com> +Date: Wed Jan 14 08:00:34 2015 +0700 + + Updated Vietnamese translation + + Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com> + + po/vi.po | 924 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 429 insertions(+), 495 deletions(-) + +commit 51532cf4f776da95f4b10772dbbe3ef2fae7dff3 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Jan 13 19:48:35 2015 +0100 + + EogSidebar: Use symbolic close icon + + src/eog-sidebar.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c0a51e581c4ba6ab91b3c1f6669f782a8df808fa +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Jan 13 19:44:04 2015 +0100 + + EogMetadataSidebar: Reduce row spacing to 3px + + Should improve the separation of the different tag groups. + + data/metadata-sidebar.ui | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit be4c5f88fde3861cb0fa1febafe0d29266e7e71c +Author: Fran Dieguez <fran.dieguez@mabishu.com> +Date: Mon Jan 12 23:54:04 2015 +0100 + + Updated Galician translations + + po/gl.po | 1157 +++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 548 insertions(+), 609 deletions(-) + +commit 650b54a7fbe106ad6d15aa626d80c91a91573fec +Author: hanniedu <lafeber-dumoleyn2@zonnet.nl> +Date: Mon Jan 12 17:19:56 2015 +0100 + + Updated Dutch translation Master 3.16 + + po/nl.po | 1211 ++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 585 insertions(+), 626 deletions(-) + +commit 841e96d56d36b96510658aa0ad8bd6cd983daba1 +Author: Stas Solovey <whats_up@tut.by> +Date: Mon Jan 12 12:36:54 2015 +0000 + + Updated Russian translation + + po/ru.po | 978 ++++++++++++++++++++++----------------------------------------- + 1 file changed, 339 insertions(+), 639 deletions(-) + +commit 3f3bc09db3ed4c36128eff1aa6bf23a72b8efb8d +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Jan 12 12:15:06 2015 +0100 + + Updated Spanish translation + + po/es.po | 143 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 87 insertions(+), 56 deletions(-) + +commit a31ead7ad37b959b0200f82ef55ef2fd1bfb73c2 +Author: Balázs Úr <urbalazs@gmail.com> +Date: Sat Jan 10 11:00:17 2015 +0000 + + Updated Hungarian translation + + po/hu.po | 1124 +++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 534 insertions(+), 590 deletions(-) + +commit 4fbf532fb0720237a646ed999f17c76170a98e6e +Author: Rafael Ferreira <rafael.f.f1@gmail.com> +Date: Thu Jan 8 23:38:09 2015 +0000 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 1183 ++++++++++++++++++++++++++++------------------------------- + 1 file changed, 561 insertions(+), 622 deletions(-) + +commit 6dc9355ce54e8f31974e4fb503bc16aaee30369f +Author: Marek Černocký <marek@manet.cz> +Date: Thu Jan 8 23:02:05 2015 +0100 + + Updated Czech translation + + po/cs.po | 128 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 77 insertions(+), 51 deletions(-) + +commit 83bf6c4498e9c107a809517e1a2926df251acc16 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 7 21:59:39 2015 +0100 + + EogMetadataSidebar: Hook up date and time labels + + src/eog-metadata-sidebar.c | 11 ++++++++--- + 1 file changed, 8 insertions(+), 3 deletions(-) + +commit 93129f1faf5dd6573ae91122ec08b70be5bf25b6 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 7 21:59:13 2015 +0100 + + EogExifUtil: Allow freeform formatting of date strings + + src/eog-exif-util.c | 55 +++++++++++++++++++++++++++++++++++++---------------- + src/eog-exif-util.h | 4 ++++ + 2 files changed, 43 insertions(+), 16 deletions(-) + +commit 2e5b0655db5199046d84b0f98daad4d015e3b2d6 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 7 20:15:07 2015 +0100 + + EogMetadataSidebar: Try to unclutter and improve the sidebar's look + + Based on a design by Allan Day. + + data/Makefile.am | 1 + + data/metadata-sidebar.ui | 409 +++++++++++++++++++++++++++++++++++++++++++++ + po/POTFILES.in | 1 + + src/eog-metadata-sidebar.c | 366 +++++++--------------------------------- + src/eog.gresource.xml | 1 + + 5 files changed, 471 insertions(+), 307 deletions(-) + +commit 8cdbae1f54b0fb746343595c8423c1adcca833ee +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 7 19:59:21 2015 +0100 + + EogWindow: Move sidebar to the opposite side of the image + + src/eog-window.c | 9 ++++----- + 1 file changed, 4 insertions(+), 5 deletions(-) + +commit 68369759466670395eb874eb145f48ba03a0652d +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu Jan 8 18:22:33 2015 +0100 + + Updated Spanish translation + + po/es.po | 1127 +++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 523 insertions(+), 604 deletions(-) + +commit 1c324ab120a96d07b3a4cc90e5ecf6a626ad8096 +Author: Marek Černocký <marek@manet.cz> +Date: Wed Jan 7 21:46:15 2015 +0100 + + Updated Czech translation + + po/cs.po | 925 +++++++++++++++++++++------------------------------------------ + 1 file changed, 302 insertions(+), 623 deletions(-) + +commit e025f72df93d62ebd94c5eb91bee2bd682fdee8f +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Wed Jan 7 21:28:41 2015 +0100 + + Updated Basque language + + po/eu.po | 1039 ++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 476 insertions(+), 563 deletions(-) + +commit f8051de56416e9a49184065c70c1e926a3ae8187 +Merge: 631b66c8 5cfdbd1c +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 7 19:43:50 2015 +0100 + + Merge branch 'wip/gaction-migration' + + Conflicts: + src/eog.gresource.xml + + This is the merge of the current state as it is required + for further developments. The "OpenWith" and "RecentFiles" menus + are still todo as is plugin integration. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + +commit 631b66c849674c8118393ab967a9dd9229f6e681 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 5 19:27:57 2015 +0100 + + Remove accidential executable bit from documentation images + + help/hu/figures/multiple-convert.png | Bin + help/hu/figures/multiple-rename-count.png | Bin + 2 files changed, 0 insertions(+), 0 deletions(-) + +commit 65720c07c943885a0048220b7a35d91002afc164 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 5 19:06:26 2015 +0100 + + EogThumbnail: Load thumbnail frame from a GResource + + Also optimize the frame's filesize. + + data/pixmaps/Makefile.am | 7 +------ + data/pixmaps/thumbnail-frame.png | Bin 908 -> 474 bytes + src/eog-thumbnail.c | 4 +++- + src/eog.gresource.xml | 1 + + 4 files changed, 5 insertions(+), 7 deletions(-) + +commit b9df4c049e493ba3d9f29193bdeb6d5b0ca95a2c +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 5 18:15:21 2015 +0100 + + EogApplication: Use gtk_application_get_active_window + + This allows dropping our own implementation. + + src/eog-application.c | 36 +++++++++++++----------------------- + 1 file changed, 13 insertions(+), 23 deletions(-) + +commit b35bbcc21e77ecd6b66f280f31859d87e179530b +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 5 17:59:55 2015 +0100 + + Build API docs without intermediate tmpl-files + + gtk-doc devs consider the tmpl-based workflow as obsolete. + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit f7c670c29bf328071129bded4446646470e6287c +Author: Andreas Nilsson <anilsson@redhat.com> +Date: Mon Jan 5 16:34:03 2015 +0100 + + Remove the scalable app icon + + Should make the 256x256 high resolution PNG the prefered + one for display in gnome-shell. + + https://bugzilla.gnome.org/show_bug.cgi?id=742369 + + data/icons/scalable/Makefile.am | 3 - + data/icons/scalable/apps/eog.svg | 548 --------------------------------------- + 2 files changed, 551 deletions(-) + +commit 27fb2129a74a8dc2521346c597073dc44fc91422 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 4 19:19:54 2015 +0100 + + EogThumbNav: Stop deprecated GtkArrow usage + + Use a matching GtkImage instead. Swapping the icons in RTL locales + is done automatically by the icon theme. + + src/eog-thumb-nav.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 096806fdea91c89ae918910348b051f2c0e86f91 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 4 19:19:07 2015 +0100 + + EogSidebar: Stop deprecated GtkArrow usage + + Use a matching GtkImage instead. + + src/eog-sidebar.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 5cfdbd1c2ab3f2af96d9b9a6cacd5a7879ad1599 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 4 17:57:23 2015 +0100 + + EogWindow: Add missing view-* actions to the window action group + + These actions were part of it beforehand and were forgotten + in the initial GAction port. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 9 ++++++++- + 1 file changed, 8 insertions(+), 1 deletion(-) + +commit 467aa7459a2515e15c72cb359fb5b2839e3092ca +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 4 16:05:48 2015 +0100 + + EogWindow: Fix indentation in commit 965549c0 + + Also remove some trailing commas in array initializers. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 24 ++++++++++++------------ + 1 file changed, 12 insertions(+), 12 deletions(-) + +commit ab4e432c083275869c744a721b3bb5d37c2ee5fd +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 4 15:56:45 2015 +0100 + + EogScrollView: Use gdk_cursor_new_for_display + + gdk_cursor_new() will be deprecated in GTK+ 3.16 and we have + the correct display at hand already anyway. + + src/eog-scroll-view.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 965549c0d12668d3225affc11da89513a946c3b9 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Mon Dec 29 20:40:31 2014 +0100 + + EogWindow: implement "groupwise" enabling/disabling of actions + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++++------- + 1 file changed, 88 insertions(+), 11 deletions(-) + +commit 97035fa063a4c6b96fcaabce7d40a201ea1f8dd9 +Author: Christian Kirbach <Christian.Kirbach@gmail.com> +Date: Sat Jan 3 14:16:58 2015 +0000 + + Updated German translation + + help/de/de.po | 1510 +++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 922 insertions(+), 588 deletions(-) + +commit e88b8b6c3b789a3edad93b2920924b66f349531f +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 25 15:52:00 2014 +0100 + + EogPropertiesDialog: Automatically make parent window actions available + + Allows accessing the parent window's GActions via the "win" namespace. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-properties-dialog.c | 49 +++++++++++++++++++++++++++------------------ + 1 file changed, 30 insertions(+), 19 deletions(-) + +commit 09fe55c6ca5206668db2da20f751fbe690437947 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Tue Dec 23 23:04:49 2014 +0100 + + EogPropertiesDialog: migrate to GAction + + This patch takes care of the GAction migration in EogPropertiesDialog. + It should be considered a draft, as it is not working yet. + + There is one thing to note: the action names for the dialog are now + hardcoded in EogWindow. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-properties-dialog.c | 24 ++++++++++++------------ + src/eog-properties-dialog.h | 4 ++-- + src/eog-window.c | 13 ++----------- + 3 files changed, 16 insertions(+), 25 deletions(-) + +commit 69a80edd4db7a9adf796e8019a7a70e55230c30b +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 23 17:52:55 2014 +0100 + + EogWindow: Fix critical warning when switching between fullscreen modes + + src/eog-window.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +commit 0309e59fa59b6dc11d94810087a116763541e6bb +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 23 17:48:24 2014 +0100 + + EogWindow: Drop unneeded handler blocks + + As the action state is now changed without triggering the handlers + they don't need to be blocked anymore. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 18 ------------------ + 1 file changed, 18 deletions(-) + +commit df87939c78373051683f73660893fb87eeb372e2 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 23 17:22:45 2014 +0100 + + EogWindow: Use gtk_widget_set_visible + + src/eog-window.c | 14 +++----------- + 1 file changed, 3 insertions(+), 11 deletions(-) + +commit 3aa22d49f74551051e4c0d86f3ecf3fd3240cb2c +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Mon Dec 22 23:55:13 2014 +0100 + + EogWindow: remove zoom-fit action + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 20 -------------------- + 1 file changed, 20 deletions(-) + +commit 0d632979adf0bdd650fffd3ad2e190ec03f1b01a +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 23 17:05:13 2014 +0100 + + Adjust fullscreen toolbar's action names + + Makes the toolbar work again after e2723eaf. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + data/fullscreen-toolbar.ui | 24 ++++++++++++------------ + 1 file changed, 12 insertions(+), 12 deletions(-) + +commit 87d65c884460426c140c7861a148511bf1d7705e +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 23 16:23:20 2014 +0100 + + Restore keyboard shortcut for slideshow mode + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-application.c | 1 + + 1 file changed, 1 insertion(+) + +commit f23f70136861dee2519cf72828c416a907418e53 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Dec 21 15:55:24 2014 +0100 + + Fix renamed file in POTFILES.in + + data/Makefile.am | 2 +- + po/POTFILES.in | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit 419b0ec142fbe64b7ae5267f42275e6c0edef2fa +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Dec 21 15:52:03 2014 +0100 + + EogApplication: Restore accelerator for Save As + + This one fell under the rug in commit 31368a7d. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-application.c | 1 + + 1 file changed, 1 insertion(+) + +commit 31368a7d721465dfcc2e9f61fa90704c7af83e33 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Dec 21 15:47:44 2014 +0100 + + EogApplication: Make accelerator assignments easier to read + + Based on code found in Evince's EvApplication class. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-application.c | 74 ++++++++++++++++++++++++++++++++------------------- + 1 file changed, 46 insertions(+), 28 deletions(-) + +commit 1d0bc8471bdc53db0c5d84f6859d3b5596795271 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Sat Dec 20 02:09:30 2014 +0100 + + EogApplication: add accelerators to GActions + + This patch adds accelerators to those GActions whose GtkActions + used to have accelerators. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-application.c | 34 ++++++++++++++++++++++++++++++++++ + 1 file changed, 34 insertions(+) + +commit fb7bb77afd2230811ab22a7866beeb83cf94aed0 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Dec 19 18:35:18 2014 +0100 + + Avoid endless feedback loop when changing bar visibility + + Also provides feedback to the app menu when the sidebar is closed. + + src/eog-window.c | 16 +++++++--------- + 1 file changed, 7 insertions(+), 9 deletions(-) + +commit e2723eaf178ff92b957204c2f16e80ae0435d63b +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Thu Dec 18 19:41:39 2014 +0100 + + change action names to short, lowercase names + + As the GAction documentation suggests, change the GAction + names to short, lowercase names. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + data/popup-menus.ui | 16 ++--- + src/eog-window.c | 164 ++++++++++++++++++++++++++-------------------------- + 2 files changed, 90 insertions(+), 90 deletions(-) + +commit 8ea5e61c147ec80aa1065bd6ac0be57de0ac0e60 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Thu Dec 18 19:01:07 2014 +0100 + + EogWindow: remove the string matching from ui_settings_changed_cb + + The changed setting is now passed as a detailed signal instead + of having to do string matching inside eog_window_ui_settings_changed_cb. + In order to facilitate this change, the connecting of the callbacks had + to be moved down a few lines to after the GActions are added to the window. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 40 +++++++++++++++++++--------------------- + 1 file changed, 19 insertions(+), 21 deletions(-) + +commit bc4e3dbf7e7d85908e6b3c20d8dbe14e2e7edde3 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Thu Dec 18 18:32:40 2014 +0100 + + EogWindow: disable the open-with and recently-used menus + + Disable the open-with and recently-used code, to prevent compile errors. They + are commented because we might still need them in the new design, but are + disabled to not hold us back for now. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 58 +++++++++++++++++++++++++++++++------------------------- + 1 file changed, 32 insertions(+), 26 deletions(-) + +commit 85339ccdbdb17af357dc837f12791b9d2fb151e2 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 18 20:53:55 2014 +0100 + + Don't reuse the GtkMenu but the menu model for the thumb view + + data/popup-menus.ui | 50 -------------------------------------------------- + src/eog-window.c | 16 ++++++++-------- + 2 files changed, 8 insertions(+), 58 deletions(-) + +commit d6fa7a086c97408b4f281320293b98f2f7e43f15 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 18 20:30:42 2014 +0100 + + Use separate object for thumbnail popup menu + + Assigning a GtkMenu twice is not guaranteed to be glitchfree. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + data/Makefile.am | 2 +- + data/{eog-view-popup.ui => popup-menus.ui} | 50 ++++++++++++++++++++++++++++++ + src/eog-window.c | 22 ++++++------- + src/eog.gresource.xml | 2 +- + 4 files changed, 62 insertions(+), 14 deletions(-) + +commit 9793b8ce016242704a2a55912d948ce3283275ce +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 18 20:04:45 2014 +0100 + + Update git.mk + + Revision bf30ed81 from https://github.com/behdad/git.mk + + git.mk | 26 +++++++++++++++++++++----- + 1 file changed, 21 insertions(+), 5 deletions(-) + +commit 7e43f480abc3b9a17f91f354fd9c0e71aea1595c +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 18 19:53:42 2014 +0100 + + Record new GtkBuilder files in Makefiles + + data/Makefile.am | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit d82e711cdbcfb9bf12ab6f8c2edd17a1df90b621 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 18 19:01:09 2014 +0100 + + Add fullscreen toolbar to POTFILES + + po/POTFILES.in | 1 + + 1 file changed, 1 insertion(+) + +commit d87f0a29e72d378b32d9ce5f20e48c6946e94a3f +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 18 18:27:41 2014 +0100 + + Stop trying to build menus with GtkUIManager + + data/eog-ui.xml | 39 --------------------------------------- + src/eog-window.c | 11 ++++------- + src/eog.gresource.xml | 1 - + 3 files changed, 4 insertions(+), 47 deletions(-) + +commit 3a0d54caf6c70bb46271d36b0ecabc9c8d8033e7 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 18 18:12:00 2014 +0100 + + Convert fullscreen toolbar to GAction/GtkBuilder + + data/fullscreen-toolbar.ui | 218 +++++++++++++++++++++++++++++++++++++++++++++ + src/eog-window.c | 15 ++-- + src/eog.gresource.xml | 1 + + 3 files changed, 228 insertions(+), 6 deletions(-) + +commit b1b868035d5a580459b7a83bc5e9bfb9a3d33985 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 22:14:36 2014 +0100 + + Remove debug printouts + + src/eog-window.c | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +commit 1e378def9cb7d4fc13d738daf821f647eb871919 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 22:03:58 2014 +0100 + + Make thumbnail popup share its model with the scrollview + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +commit 49fe9e214c064e7f7a5beb89232982f5f5d96700 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 21:34:28 2014 +0100 + + Populate EogScrollView popup menu using GtkBuilder + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + data/eog-ui.xml | 19 ------------------ + data/eog-view-popup.ui | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++ + po/POTFILES.in | 1 + + src/eog-window.c | 10 +++++++++- + src/eog.gresource.xml | 1 + + 5 files changed, 64 insertions(+), 20 deletions(-) + +commit a004b0b24f3f6bad3308fbdd878596184a0a45cc +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 21:05:23 2014 +0100 + + Remove EggEditableToolbar files from translation + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + po/POTFILES.in | 2 -- + 1 file changed, 2 deletions(-) + +commit 567b86dbdb099f2b56afd8c88ff8d59ff8bf1004 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 20:08:39 2014 +0100 + + Add back eog_window_open_editor as we might still need it + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 41 ++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 40 insertions(+), 1 deletion(-) + +commit 73b6d67391649d8224435f53d6329c4436976b7c +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Tue Dec 16 21:11:02 2014 +0100 + + Remove the GtkMenuBar + + This patch removes all code for the GtkMenuBar in Eye of Gnome. This is + necessary because the new GActions are incompatible with it and it needs to be + removed for the UI update as well. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + data/eog-ui.xml | 83 -------------------------------------- + src/eog-window.c | 121 ++----------------------------------------------------- + 2 files changed, 3 insertions(+), 201 deletions(-) + +commit 92caaf8db45b8b891225beaa8cb0194f44d36e67 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Tue Dec 16 00:46:36 2014 +0100 + + Remove all other references to the toolbar + + This patch removes all further references to the toolbar. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + Makefile.am | 2 +- + configure.ac | 9 - + cut-n-paste/Makefile.am | 3 - + cut-n-paste/toolbar-editor/Makefile.am | 105 -- + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 1936 -------------------- + cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 95 - + cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 677 ------- + cut-n-paste/toolbar-editor/egg-toolbar-editor.h | 63 - + cut-n-paste/toolbar-editor/egg-toolbars-model.c | 987 ---------- + cut-n-paste/toolbar-editor/egg-toolbars-model.h | 190 -- + cut-n-paste/toolbar-editor/eggmarshalers.list | 1 - + .../update-toolbareditor-from-libegg.sh | 33 - + data/Makefile.am | 5 - + data/eog-app-menu.xml | 4 - + data/eog-toolbar.xml | 37 - + data/eog-ui.xml | 2 - + data/eog.convert | 1 - + data/org.gnome.eog.gschema.xml.in | 6 +- + doc/reference/Makefile.am | 2 - + doc/reference/eog-sections.txt | 4 - + tests/actions.feature | 9 - + 21 files changed, 2 insertions(+), 4169 deletions(-) + +commit 2c5e3979a65f6525c3dfb0c96fa91458bf3b7c56 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Tue Dec 16 00:30:18 2014 +0100 + + src: remove all code related to EggEditableToolbar + + This patch removes all code for the GtkToolbar inside src/. This is necessary + because the new GActions are incompatible with it and it needs to be removed + for the UI update as well. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/Makefile.am | 5 - + src/eog-application-internal.h | 9 -- + src/eog-application.c | 93 ------------- + src/eog-config-keys.h | 1 - + src/eog-util.c | 1 - + src/eog-window.c | 308 ++--------------------------------------- + 6 files changed, 14 insertions(+), 403 deletions(-) + +commit 677297cd95ea7c446605b10144c54061f5e78d01 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Thu Dec 11 20:01:23 2014 +0100 + + eog-window.c: GtkAction -> GAction + + This patch replaces all the GtkAction related code in eog-window.c to its + GAction equivalents. + + Some things to note: + + 1) I only changed the lines required to change, to keep the diff as small + as possible. I do think some parts in eog-window.c can do with some + cleanup and a consistent style needs to be applied. (I tried to match up + with whatever style was used in the function I was working in.) + 2) I renamed _some_ functions and arguments to better indicate what they're + for, but only those lines I already touched anyway. + 3) actions_window is now directly mapped onto the + GtkApplicationWindow/EogWindow. + 4) We might want to change the action names to short, lowercase names as the + documentation suggests. + 5) The UI is not working anymore, due to incompatibility: it requires + GtkAction. This left me unable to test some/most of the changes, however + I quickly added some accelerators to those actions I could and it all + seems to be working so I have faith the other changes will to. + + What's left to do: + + 1) Test all changes. + 2) Remove deprecated and not-working UI code. + 3) Add accelerators to all actions. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 1075 +++++++++++++++++++++--------------------------------- + 1 file changed, 422 insertions(+), 653 deletions(-) + +commit c0f6deb2b1afdc4c4b414c43388d5575eeea357f +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 21:40:37 2014 +0100 + + Revert "eog-window.c: GtkAction -> GAction" + + This reverts commit 8b1fc17689d3a73abcabfb55de4721c1f7eac22b. + This was not meant to be pushed to master yet. + + src/eog-window.c | 1075 +++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 653 insertions(+), 422 deletions(-) + +commit 099f986965d365ca8cece25fa58f7ddb5ffffb6d +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 21:40:00 2014 +0100 + + Revert "src: remove all code related to EggEditableToolbar" + + This reverts commit 36ff7907cfc0697266fbf43ba0bd55eecb4bac7c. + + src/Makefile.am | 5 + + src/eog-application-internal.h | 9 ++ + src/eog-application.c | 93 +++++++++++++ + src/eog-config-keys.h | 1 + + src/eog-util.c | 1 + + src/eog-window.c | 308 +++++++++++++++++++++++++++++++++++++++-- + 6 files changed, 403 insertions(+), 14 deletions(-) + +commit c8a25656244e794fc85a8d7058d54b8b1def966b +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 21:39:58 2014 +0100 + + Revert "Remove all other references to the toolbar" + + This reverts commit 6df4284cda1954e4192d387a676df1fc50730647. + + Makefile.am | 2 +- + configure.ac | 9 + + cut-n-paste/Makefile.am | 3 + + cut-n-paste/toolbar-editor/Makefile.am | 105 ++ + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 1936 ++++++++++++++++++++ + cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 95 + + cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 677 +++++++ + cut-n-paste/toolbar-editor/egg-toolbar-editor.h | 63 + + cut-n-paste/toolbar-editor/egg-toolbars-model.c | 987 ++++++++++ + cut-n-paste/toolbar-editor/egg-toolbars-model.h | 190 ++ + cut-n-paste/toolbar-editor/eggmarshalers.list | 1 + + .../update-toolbareditor-from-libegg.sh | 33 + + data/Makefile.am | 5 + + data/eog-app-menu.xml | 4 + + data/eog-toolbar.xml | 37 + + data/eog-ui.xml | 2 + + data/eog.convert | 1 + + data/org.gnome.eog.gschema.xml.in | 6 +- + doc/reference/Makefile.am | 2 + + doc/reference/eog-sections.txt | 4 + + tests/actions.feature | 9 + + 21 files changed, 4169 insertions(+), 2 deletions(-) + +commit 9000e9f25687e1ee6425269df63ff86b9e3309c7 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 21:39:54 2014 +0100 + + Revert "Remove the GtkMenuBar" + + This reverts commit 3d0405be352fa13e7021d19d1ead1375140b41c3. + + data/eog-ui.xml | 83 ++++++++++++++++++++++++++++++++++++++ + src/eog-window.c | 121 +++++++++++++++++++++++++++++++++++++++++++++++++++++-- + 2 files changed, 201 insertions(+), 3 deletions(-) + +commit e68b35ff93617b7ad76460e57b39740e466314e2 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 21:39:46 2014 +0100 + + Revert "Add back eog_window_open_editor as we might still need it" + + This reverts commit 72253fdf400247092fd6ed613e95f6b023330dc8. + + src/eog-window.c | 41 +---------------------------------------- + 1 file changed, 1 insertion(+), 40 deletions(-) + +commit 72253fdf400247092fd6ed613e95f6b023330dc8 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 17 20:08:39 2014 +0100 + + Add back eog_window_open_editor as we might still need it + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 41 ++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 40 insertions(+), 1 deletion(-) + +commit 3d0405be352fa13e7021d19d1ead1375140b41c3 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Tue Dec 16 21:11:02 2014 +0100 + + Remove the GtkMenuBar + + This patch removes all code for the GtkMenuBar in Eye of Gnome. This is + necessary because the new GActions are incompatible with it and it needs to be + removed for the UI update as well. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + data/eog-ui.xml | 83 -------------------------------------- + src/eog-window.c | 121 ++----------------------------------------------------- + 2 files changed, 3 insertions(+), 201 deletions(-) + +commit 6df4284cda1954e4192d387a676df1fc50730647 +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Tue Dec 16 00:46:36 2014 +0100 + + Remove all other references to the toolbar + + This patch removes all further references to the toolbar. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + Makefile.am | 2 +- + configure.ac | 9 - + cut-n-paste/Makefile.am | 3 - + cut-n-paste/toolbar-editor/Makefile.am | 105 -- + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 1936 -------------------- + cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 95 - + cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 677 ------- + cut-n-paste/toolbar-editor/egg-toolbar-editor.h | 63 - + cut-n-paste/toolbar-editor/egg-toolbars-model.c | 987 ---------- + cut-n-paste/toolbar-editor/egg-toolbars-model.h | 190 -- + cut-n-paste/toolbar-editor/eggmarshalers.list | 1 - + .../update-toolbareditor-from-libegg.sh | 33 - + data/Makefile.am | 5 - + data/eog-app-menu.xml | 4 - + data/eog-toolbar.xml | 37 - + data/eog-ui.xml | 2 - + data/eog.convert | 1 - + data/org.gnome.eog.gschema.xml.in | 6 +- + doc/reference/Makefile.am | 2 - + doc/reference/eog-sections.txt | 4 - + tests/actions.feature | 9 - + 21 files changed, 2 insertions(+), 4169 deletions(-) + +commit 36ff7907cfc0697266fbf43ba0bd55eecb4bac7c +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Tue Dec 16 00:30:18 2014 +0100 + + src: remove all code related to EggEditableToolbar + + This patch removes all code for the GtkToolbar inside src/. This is necessary + because the new GActions are incompatible with it and it needs to be removed + for the UI update as well. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/Makefile.am | 5 - + src/eog-application-internal.h | 9 -- + src/eog-application.c | 93 ------------- + src/eog-config-keys.h | 1 - + src/eog-util.c | 1 - + src/eog-window.c | 308 ++--------------------------------------- + 6 files changed, 14 insertions(+), 403 deletions(-) + +commit 8b1fc17689d3a73abcabfb55de4721c1f7eac22b +Author: Jente Hidskes <hjdskes@gmail.com> +Date: Thu Dec 11 20:01:23 2014 +0100 + + eog-window.c: GtkAction -> GAction + + This patch replaces all the GtkAction related code in eog-window.c to its + GAction equivalents. + + Some things to note: + + 1) I only changed the lines required to change, to keep the diff as small + as possible. I do think some parts in eog-window.c can do with some + cleanup and a consistent style needs to be applied. (I tried to match up + with whatever style was used in the function I was working in.) + 2) I renamed _some_ functions and arguments to better indicate what they're + for, but only those lines I already touched anyway. + 3) actions_window is now directly mapped onto the + GtkApplicationWindow/EogWindow. + 4) We might want to change the action names to short, lowercase names as the + documentation suggests. + 5) The UI is not working anymore, due to incompatibility: it requires + GtkAction. This left me unable to test some/most of the changes, however + I quickly added some accelerators to those actions I could and it all + seems to be working so I have faith the other changes will to. + + What's left to do: + + 1) Test all changes. + 2) Remove deprecated and not-working UI code. + 3) Add accelerators to all actions. + + https://bugzilla.gnome.org/show_bug.cgi?id=741050 + + src/eog-window.c | 1075 +++++++++++++++++++++--------------------------------- + 1 file changed, 422 insertions(+), 653 deletions(-) + +commit 805c0fdd230655508fc4263eeb7bc302c088c797 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 16 21:42:09 2014 +0100 + + Post-branch version bump + + Show that this is development code again. + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 8559c2bd2b5f904220ef1968818134cea1e27273 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 19 21:39:24 2014 +0100 + + Add credits to NEWS that got lost when doing 3.14.3 + + NEWS | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 439c15d62d7cee2e9d918e51b3fe839e66483151 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 19 21:33:31 2014 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 345caa1542477439d7ca206b51db84f9c665ec59 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 19 21:29:06 2014 +0100 + + Prepare for release 3.14.3 + + NEWS | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +commit a9be9741fce0b9be0e0d4f9051c576e449b5a1b0 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 19 20:31:25 2014 +0100 + + Fix two more memory leaks + + Taken from a Cppcheck report provided by Boris Egorov. + + https://bugzilla.gnome.org/show_bug.cgi?id=740348 + + src/eog-debug.c | 10 +++++----- + src/eog-metadata-sidebar.c | 1 + + 2 files changed, 6 insertions(+), 5 deletions(-) + +commit 64cc76ccbfd7e5c59d007bfc1bac1c1365c501d7 +Author: Boris Egorov <egorov@linux.com> +Date: Wed Nov 19 10:26:22 2014 +0600 + + Fix a few memory leaks + + Detected by Cppcheck + + Signed-off-by: Boris Egorov <egorov@linux.com> + + src/eog-thumb-view.c | 1 + + src/eog-uri-converter.c | 6 ++++-- + 2 files changed, 5 insertions(+), 2 deletions(-) + +commit 46c38b71222b79f711983164a41a4e9d03283016 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 19 19:20:03 2014 +0100 + + Make sure the libpeas-gtk dependency isn't optimized away + + Aggressive linkers could drop the dependency which would + cause problems using during runtime. + Based on a patch for the same problem for gedit by Garret Regier. + + https://bugzilla.gnome.org/show_bug.cgi?id=739618 + + src/eog-preferences-dialog.c | 4 ++++ + 1 file changed, 4 insertions(+) + +commit ff2c74f150e3a90abdae3d1c7f4e50acd7d0b75b +Author: Trần Ngọc Quân <vnwildman@gmail.com> +Date: Mon Nov 17 15:10:20 2014 +0700 + + Updated Vietnamese translation + + Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com> + + po/vi.po | 905 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 500 insertions(+), 405 deletions(-) + +commit 682ef39b8f2635ede10b39759a081b0713a8eefd +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 10 21:29:11 2014 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit edfbfad67322801fb96930ddfff716cf71e91d53 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 10 21:16:08 2014 +0100 + + Prepare for release 3.14.2 + + NEWS | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +commit 32d923f7710874f5ebfbf58801b3fb615c089349 +Author: Daniel Martinez <dmartinez@src.gnome.org> +Date: Sun Nov 9 21:21:24 2014 +0100 + + Add Aragonese language + + po/LINGUAS | 1 + + po/an.po | 1692 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1693 insertions(+) + +commit 04c68a4cbcd9affde20b4d3cd5cb3e5d5d320f62 +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Thu Nov 6 02:36:35 2014 +0000 + + Updated Kazakh translation + + po/kk.po | 834 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 426 insertions(+), 408 deletions(-) + +commit 061f0d73f6d188e8ec83ba82285d6a77dc05e440 +Author: Timo Jyrinki <timo@debian.org> +Date: Mon Nov 3 18:52:29 2014 +0200 + + Change Finnish translation team web page to l10n.gnome.org + + po/fi.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit f5194f9cfb5d0380da4f685bcba1610c0857d18f +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Wed Oct 15 08:52:13 2014 +0000 + + Updated Friulian translation + + po/fur.po | 890 +++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 501 insertions(+), 389 deletions(-) + +commit 07b0b16a66f37993dd6df90e1b59a274c083b8ff +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 13 20:15:45 2014 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 1b8ba61be89f8cba7e14c604ec7b67f6151c8fe7 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 13 20:12:46 2014 +0200 + + Prepare for release 3.14.1 + + NEWS | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +commit da2cd8a6584aab5479d4086df293b0fe79a17602 +Author: Arash Mousavi <mousavi.arash@gmail.com> +Date: Fri Oct 10 01:17:30 2014 +0330 + + Updates Persian Translations + + po/fa.po | 967 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 547 insertions(+), 420 deletions(-) + +commit b0377f275488308d4bfa9cca3919aff43e76d68d +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 8 20:58:55 2014 +0200 + + EogCloseConfirmationDialog: Fix label line wrapping (mult. imgs) + + Set a maximum width to actually make line wrapping happen. + Required using deprecated alignment properties again as the label + alignment would go off once line wrapping occured. + + https://bugzilla.gnome.org/show_bug.cgi?id=737772 + + src/eog-close-confirmation-dialog.c | 12 ++++++++++-- + 1 file changed, 10 insertions(+), 2 deletions(-) + +commit e376816206b4c27bbfae0f78e683dddb67602408 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 8 20:49:11 2014 +0200 + + EogCloseConfirmationDialog: Fix label line wrapping + + Set a maximum width to actually make line wrapping happen. + Required using deprecated alignment properties again as the label + alignment would go off once line wrapping occured. + + https://bugzilla.gnome.org/show_bug.cgi?id=737772 + + src/eog-close-confirmation-dialog.c | 19 ++++++++++++++++--- + 1 file changed, 16 insertions(+), 3 deletions(-) + +commit 748e2fcb043222b04344b20960282c7ac8553823 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Oct 7 22:59:47 2014 +0200 + + Raise required GTK+ version for gesture support + + https://bugzilla.gnome.org/show_bug.cgi?id=737960 + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b8421597766ca8d7134d713175a982302743b0d2 +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sat Oct 4 22:28:35 2014 +0900 + + Updated Korean help translation + + help/ko/ko.po | 30 +++++++++++++++--------------- + 1 file changed, 15 insertions(+), 15 deletions(-) + +commit 95abbcf3de0865d1f3daadc2a803f00e6c38373d +Author: Seong-ho Cho <shcho@gnome.org> +Date: Sat Oct 4 22:28:21 2014 +0900 + + Updated Korean help translation + + help/ko/figures/eog-toolbar-editor.png | Bin 0 -> 36100 bytes + help/ko/figures/image-view-prefs.png | Bin 0 -> 33405 bytes + help/ko/figures/multiple-convert.png | Bin 0 -> 37549 bytes + help/ko/figures/multiple-rename-count.png | Bin 0 -> 38083 bytes + help/ko/figures/plugin-send-by-email.png | Bin 0 -> 58381 bytes + help/ko/figures/plugins-all.png | Bin 0 -> 95910 bytes + help/ko/figures/prefs-plugins-date.png | Bin 0 -> 32287 bytes + help/ko/figures/prefs-plugins-fullscreen.png | Bin 0 -> 32255 bytes + help/ko/figures/prefs-plugins.png | Bin 0 -> 31410 bytes + help/ko/figures/slideshow-prefs.png | Bin 0 -> 23359 bytes + 10 files changed, 0 insertions(+), 0 deletions(-) + +commit 49fc45604205f665c418e64c4098b30fe9bf4c7d +Author: Rafael Ferreira <rafael.f.f1@gmail.com> +Date: Tue Sep 30 14:50:34 2014 +0000 + + Updated Brazilian Portuguese translation + + help/pt_BR/pt_BR.po | 213 ++++++++++++++++++++++++++-------------------------- + 1 file changed, 105 insertions(+), 108 deletions(-) + +commit 037affa01e076619fb7ead15833e24d3c5c61d01 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Sep 24 23:08:23 2014 +0200 + + Fix build without XMP support + + https://bugzilla.gnome.org/show_bug.cgi?id=737213 + + src/eog-properties-dialog.c | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 1aee8c3c8fd28c7508fb80730fb436ef35bae9ba +Author: Pawan Chitrakar <chautari@gmail.com> +Date: Tue Sep 23 18:00:30 2014 +0000 + + Updated Nepali translation + + po/ne.po | 1821 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---- + 1 file changed, 1703 insertions(+), 118 deletions(-) + +commit 7c2c2a055c43fbf076d21093231d469723012a60 +Author: Pawan Chitrakar <chautari@gmail.com> +Date: Tue Sep 23 17:58:28 2014 +0000 + + Updated Nepali translation + + po/ne.po | 1821 ++++---------------------------------------------------------- + 1 file changed, 118 insertions(+), 1703 deletions(-) + +commit f1a4e22eac94e5f631a5c742c83b49cae8f6a764 +Author: Pawan Chitrakar <chautari@gmail.com> +Date: Tue Sep 23 16:17:53 2014 +0000 + + Updated Nepali translation + + po/ne.po | 1912 ++++++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 1291 insertions(+), 621 deletions(-) + +commit 1a206147303e3a97262009dfd1458cd59719c843 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 22 21:35:33 2014 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 47761d2f2bbf613735c82f16e923cbd57397d975 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 22 21:30:48 2014 +0200 + + Prepare for release 3.14.0 + + NEWS | 7 +++++++ + configure.ac | 4 ++-- + 2 files changed, 9 insertions(+), 2 deletions(-) + +commit 095f248df4cdcc43c58f16266699f47f16156293 +Author: Jiri Grönroos <jiri.gronroos+l10n@iki.fi> +Date: Wed Sep 17 17:46:23 2014 +0300 + + Finnish translation update + + po/fi.po | 572 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 291 insertions(+), 281 deletions(-) + +commit 45ce3825200c8d58ab89f83279a10d560ab00a59 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 15 21:01:21 2014 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 5c765d4313ff29ca4583f8c9375c8ce5eb329a02 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 15 20:58:11 2014 +0200 + + Prepare for release 3.13.92 + + NEWS | 13 +++++++++++++ + configure.ac | 2 +- + 2 files changed, 14 insertions(+), 1 deletion(-) + +commit 823f2a21f21d2614aab7e03858246918df43ec90 +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sun Sep 14 05:09:54 2014 +0900 + + Updated Korean translation + + help/ko/figures/eog_save_as_window.png | Bin 41201 -> 0 bytes + help/ko/figures/eog_start_window.png | Bin 15064 -> 0 bytes + help/ko/figures/eog_toolbar_editor_window.png | Bin 30023 -> 0 bytes + help/ko/ko.po | 3814 +++++++++++++++---------- + po/ko.po | 251 +- + 5 files changed, 2398 insertions(+), 1667 deletions(-) + +commit 496041fda8b7aa147d8da5c99c2798ce499b2478 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Wed Sep 10 15:33:41 2014 +0200 + + Fix tags in Finnish help translation + + help/fi/fi.po | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit fc60934d2d9808fc1d0896a68ec8b7cd40d34ef3 +Author: Ivaylo Valkov <ivaylo@e-valkov.org> +Date: Sun Sep 7 17:43:12 2014 +0300 + + Updated Bulgarian translation. + + po/bg.po | 810 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 452 insertions(+), 358 deletions(-) + +commit dd944862eafd20c5ce600448fd11a4fef071a6ac +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Thu Sep 4 13:34:12 2014 +0200 + + tests: remove zh_CN locale from screenshot tour + + Continuous doesn't have required fonts installed, so test fails + + tests/screenshot_tour.feature | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +commit ac5adfd5c70e1425551504d0fcb7060fd845bbfb +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 18 22:41:31 2014 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 3882fad38adf0de55b4d04d97b182514dfafef21 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 18 22:38:35 2014 +0200 + + Prepare for release 3.13.90 + + NEWS | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +commit 802c5b9da893ca7c31cafa17566badaafc00f986 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 17 17:15:41 2014 +0200 + + Raise version number to 3.13.90 + + Schedule says that version is already up. We missed a release it seems. + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c5d4eadb0b4e3de979352a86f866f4b4768c5d21 +Merge: 89c16b86 4cbd2d31 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Aug 13 21:05:03 2014 +0200 + + Merge branch 'gestures' + + https://bugzilla.gnome.org/show_bug.cgi?id=730656 + +commit 89c16b8691de8afd06ce897f95b0eff215db6e6e +Author: MarMav <mavridou@gmail.com> +Date: Wed Aug 13 13:09:47 2014 +0000 + + Updated Greek translation + + po/el.po | 599 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 303 insertions(+), 296 deletions(-) + +commit 4cbd2d31b36f901fb814c5c7757963f37f9ff8e5 +Author: Carlos Garnacho <carlosg@gnome.org> +Date: Mon May 19 14:40:54 2014 +0200 + + EogWindow: Handle EogScrollView next/previous image signals + + src/eog-window.c | 22 ++++++++++++++++++++++ + 1 file changed, 22 insertions(+) + +commit e0378a811508ae1d0ba01fe405ef711e04dbb16c +Author: Carlos Garnacho <carlosg@gnome.org> +Date: Mon May 19 14:38:14 2014 +0200 + + EogScrollView: Add next/previous image signals + + Those are triggered by a pan gesture. If the scrollview is not scrollable + horizontally, and a horizontal pan gesture happens, next/prev signals are + emitted on the view. Vertical panning can still trigger scrolling or DnD. + + src/eog-scroll-view.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++ + src/eog-scroll-view.h | 2 ++ + 2 files changed, 95 insertions(+) + +commit bb61625f073d83fad937618bfe30c078a96b4c7f +Author: Carlos Garnacho <carlosg@gnome.org> +Date: Wed Aug 13 13:26:54 2014 +0200 + + EogWindow: Handle EogScrollView rotation-changed signal + + This makes sure the undo stack gets properly modified, as it happens when + clicking the "rotate" buttons in the UI. + + src/eog-window.c | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +commit bce2efce8dfbcd4baaf255331b4722c8dcba297d +Author: Carlos Garnacho <carlosg@gnome.org> +Date: Mon May 5 20:17:43 2014 +0200 + + EogScrollView: add image rotation gesture/signal + + A ::rotation-changed signal has been added to EogScrollView, that reports + angle changes happening from within the view in 90 degree steps. A + GtkGestureRotate has been hooked to the widget so two-finger touchscreen + interaction does rotate the image. + + In order to avoid unintended angle changes when the delta is too close to + a switch point, there is a "grey area" threshold that makes it harder to + switch forth and back again. + + This gesture has been added to the same group than the GtkGestureZoom, + as both are meant to share sequences and state. + + src/eog-scroll-view.c | 133 ++++++++++++++++++++++++++++++++++++++++++++++++++ + src/eog-scroll-view.h | 1 + + 2 files changed, 134 insertions(+) + +commit 32f09f732470987f0ad4201ed92dfd3a528e13be +Author: Carlos Garnacho <carlosg@gnome.org> +Date: Thu Mar 27 18:27:41 2014 +0100 + + EogScrollView: Add pinch/zoom gesture + + GtkGestureZoom is used to handle 2-finger pinch/zoom gestures. + If the gesture is triggered, scrolling is cancelled, and both + zoom/offsets are controlled through the 2-sequences bounding box + and distance. + + src/eog-scroll-view.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++++-- + 1 file changed, 87 insertions(+), 2 deletions(-) + +commit 8e71e04e5fc3ffc5a2d4f9703d98f90728667d17 +Author: Daniel Șerbănescu <daniel [at] serbanescu [dot] dk> +Date: Sun Aug 10 20:28:33 2014 +0200 + + Updated Romanian Translation + + help/Makefile.am | 2 +- + help/ro/ro.po | 4052 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 4053 insertions(+), 1 deletion(-) + +commit 61de8b684c706e1c71fc6d51bdc99601391ab029 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 10 17:19:56 2014 +0200 + + Stop using stock icons for the plugins + + plugins/fullscreen/fullscreen.plugin.desktop.in | 2 +- + plugins/reload/reload.plugin.desktop.in | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit 45ede27da2a6f28782b7a5d31b48b0f8a93005be +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 10 17:13:40 2014 +0200 + + EogPreferencesDialog: Replace stock labels + + data/eog-preferences-dialog.ui | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 385e50a92d059babfff7c627079f0a5d4c03407a +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 10 17:11:56 2014 +0200 + + EogImagePropertiesDialog: Fix stock icons and container structure + + This removes the used stock icons and switches to standard icons. + Also several odd container structures are cleaned up. + + data/eog-image-properties-dialog.ui | 470 +++++++++++++++--------------------- + src/eog-properties-dialog.c | 42 +++- + 2 files changed, 226 insertions(+), 286 deletions(-) + +commit 00641d24f94fd69c033d41c9314eec9a9f269f17 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 10 15:20:52 2014 +0200 + + Replace remaining uses of margin-left and margin-right properties + + Replaced with margin-start and margin-end, which should make + EogMetadataSidebar's layout in RTL environments more similar to the + LTR layout. + + src/eog-metadata-sidebar.c | 6 +++--- + src/eog-statusbar.c | 4 ++-- + 2 files changed, 5 insertions(+), 5 deletions(-) + +commit d53d813e7f99ce2cf85e4d79531f9fbd7042ab83 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Sun Aug 3 14:57:57 2014 +0900 + + l10n: Update Japanese translation + + po/ja.po | 164 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 83 insertions(+), 81 deletions(-) + +commit 511f0a7ab95ea7425ea4702512203e5147d4e093 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Mon Jul 28 20:11:18 2014 +0200 + + tests: trap exceptions in before_tag + + tests/environment.py | 13 ++++++++----- + 1 file changed, 8 insertions(+), 5 deletions(-) + +commit c950a6c5205c88b817f021dc73ee82ce78f6b526 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Mon Jul 28 11:38:11 2014 +0200 + + tests: merge screenshot tour tests + + Makefile.am | 2 +- + tests/screenshot_tour.feature | 22 +++------------------- + 2 files changed, 4 insertions(+), 20 deletions(-) + +commit 1dc3d06a51bfede953cfb11a81590592e17ae242 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Sun Jul 27 15:51:11 2014 +0200 + + tests: give nice name for screenshot tests and add more locales + + Makefile.am | 2 +- + tests/screenshot_tour.feature | 54 ++++++++++++++++++++++++++++++++----------- + 2 files changed, 42 insertions(+), 14 deletions(-) + +commit 692758c64e242563222386cbc12b4fddc47f44e8 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Fri Jul 25 08:02:24 2014 +0200 + + tests: don't inlude pointer in screenshots + + tests/environment.py | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d52f34e60574eb7ec0b62b01d869df7e25f305d8 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Thu Jul 24 16:44:20 2014 +0200 + + tests: add screenshot tour test + + This would help designers to check app looks (see screenshots + in installed-tests/eog_screenshots) and translators + + Makefile.am | 2 +- + tests/environment.py | 35 +++++++++++++++++++++++++++++++++++ + tests/screenshot_tour.feature | 41 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 77 insertions(+), 1 deletion(-) + +commit 2284141dfc691d1f3fb5bf3b204100714a25ff86 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Thu Jul 24 16:42:34 2014 +0200 + + tests: allow tests to use translations + + + Instead of looking for specified string first try to translate it to current language (set via + LANG env) + + tests/common_steps.py | 42 +++++++++++++++++++++++------ + tests/steps/steps.py | 73 +++++++++++++++++++++++++++++++++++---------------- + 2 files changed, 84 insertions(+), 31 deletions(-) + +commit eb9cf843029245a5cde2f0d185babfda62500d8f +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Jul 22 11:55:37 2014 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 759ebed19798c89bb291fe6439ef176ce1e0b5cd +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Jul 22 11:49:44 2014 +0200 + + Prepare for release 3.13.3 + + NEWS | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +commit df4d2f69de89acc900cffd62b99a38b1a09e29a0 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Mon Jul 21 15:00:57 2014 +0200 + + build: strip unneeded test env setting and fix test install + + m4/behave-installed-tests.m4 | 8 ++------ + 1 file changed, 2 insertions(+), 6 deletions(-) + +commit 91e9a9be0ab614b15204c720b85d4866ca163fe5 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Fri Jul 11 15:47:48 2014 +0200 + + build: fix typo in step definitions files list + + m4/behave-installed-tests.m4 | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 80deb4320db849a2fbb1dffd8f2b620be5b0f2d2 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Thu Jul 10 13:59:43 2014 +0200 + + build: include tests in release tarball + + Makefile.am | 5 +++-- + m4/behave-installed-tests.m4 | 16 ++++++++-------- + 2 files changed, 11 insertions(+), 10 deletions(-) + +commit 456074096e2bf0961d068dab226fa188f55faa46 +Author: Muhammet Kara <muhammetk@gmail.com> +Date: Fri May 30 22:46:48 2014 +0000 + + Updated Turkish translation + + po/tr.po | 116 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 57 insertions(+), 59 deletions(-) + +commit 2fad22161c739ec4ff86309d51a98b8a14ba219b +Author: Felix Riemann <friemann@gnome.org> +Date: Thu May 29 21:48:11 2014 +0200 + + Drop GtkMisc and GtkAlignment usage in eog code + + Both are deprecated and can be replaced by simple GtkWidget properties. + This leaves out the dialogs made with Glade as it doesn't have + support for the new margin-start property yet. + + configure.ac | 2 +- + src/eog-close-confirmation-dialog.c | 14 +++++++------- + src/eog-error-message-area.c | 6 +++--- + src/eog-metadata-sidebar.c | 6 ++++-- + src/eog-print-image-setup.c | 19 +++++++------------ + src/eog-window.c | 8 ++++---- + 6 files changed, 26 insertions(+), 29 deletions(-) + +commit bbf3ee63ca740d718268f30805d1018644589264 +Author: Muhammet Kara <muhammetk@gmail.com> +Date: Thu May 29 00:10:18 2014 +0000 + + Updated Turkish translation + + po/tr.po | 672 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 355 insertions(+), 317 deletions(-) + +commit 3c962bd476f1911406ba5f47ddcc07788672f207 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed May 28 19:30:44 2014 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 13103861f1189aaa1e496299b84135a5b0488aa6 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 26 20:38:04 2014 +0200 + + Prepare for release 3.13.2 + + NEWS | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +commit 485863e7b92f4d1cf79398ac347355c3c4d55a7b +Author: Tom Tryfonidis <tomtryf@gmail.com> +Date: Mon May 12 20:34:39 2014 +0000 + + Updated Greek translation + + help/el/el.po | 224 +++++++++++++++++++++++++++++----------------------------- + 1 file changed, 113 insertions(+), 111 deletions(-) + +commit eefad8ace4ac12ac8f69b48eb8a980e113974f7e +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 11 18:00:25 2014 +0200 + + Only export eog symbols from the private shared library + + As eog doesn't install headers for the Egg and JPEG parts these don't + need to be exported. + + src/Makefile.am | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 5e7c76ea9eb6e4577a4605fbdb62e3dc4fc64e9a +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 11 17:28:42 2014 +0200 + + Remove private/obsolete API from reference docs + + doc/reference/eog-docs.xml.in | 16 +++--------- + doc/reference/eog-sections.txt | 57 ++++++++++++++---------------------------- + 2 files changed, 22 insertions(+), 51 deletions(-) + +commit f295f4debe455fb14b1c4cb8aff913bbb9a54597 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 11 17:09:41 2014 +0200 + + Split eog into executable and private shared library + + This makes the GResource migration cleaner as the resources are + logically grouped with the code using them. + + doc/reference/Makefile.am | 19 ++++++++++++++----- + plugins/Makefile.am | 13 ++++++++++--- + src/Makefile.am | 23 ++++++++++++----------- + 3 files changed, 36 insertions(+), 19 deletions(-) + +commit c991471b092433aab359ed90afc4ae678a4c2713 +Author: Carles Ferrando <carles.ferrando@gmail.com> +Date: Fri May 9 00:07:51 2014 +0200 + + [l10n] Updated Catalan (Valencian) translation + + po/ca@valencia.po | 598 +++++++++++++++++++++++++++++------------------------- + 1 file changed, 319 insertions(+), 279 deletions(-) + +commit 377fd19596e83bee323297c9516894901422fa62 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 4 15:35:26 2014 +0200 + + EogPreferencesDialog: Make use of extra space when resizing dialog + + https://bugzilla.gnome.org/show_bug.cgi?id=729498 + + data/eog-preferences-dialog.ui | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 066be17db6a58b55d7c93d7bcb43c2a7fae050ad +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 4 14:13:54 2014 +0200 + + EogApplication: Activate per-app plugins in the startup callback + + If activated in the init function the application could not be + as initialized as expected by the plugins. Also this avoids the + unneeded plugin enumeration when reusing an instance. + + https://bugzilla.gnome.org/show_bug.cgi?id=729494 + + src/eog-application.c | 58 +++++++++++++++++++++++++-------------------------- + 1 file changed, 29 insertions(+), 29 deletions(-) + +commit a2defa1d08be2367d78938a362f7a234a9166d65 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 4 13:24:34 2014 +0200 + + Load EogMultipleSaveAsDialog from GResource + + data/Makefile.am | 2 +- + src/eog-save-as-dialog-helper.c | 9 +-------- + src/eog.gresource.xml | 1 + + 3 files changed, 3 insertions(+), 9 deletions(-) + +commit 9a60071fb0c0adfe71cb58cb81fde6dfb035f63b +Author: Felix Riemann <friemann@gnome.org> +Date: Sat May 3 20:27:10 2014 +0200 + + Remove EogDialog helper class + + EogDialog has become obsolete with the switch to GtkBuilder templates. + + doc/reference/eog-sections.txt | 18 ---- + src/Makefile.am | 2 - + src/eog-dialog.c | 232 ----------------------------------------- + src/eog-dialog.h | 76 -------------- + src/eog-metadata-sidebar.c | 1 - + src/eog-window.h | 1 - + 6 files changed, 330 deletions(-) + +commit f96947cf5749a78cdd3848ed8bc5e7bfe883d0b0 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat May 3 20:22:31 2014 +0200 + + EogPreferencesDialog: Convert to GtkBuilder template + + Also embed the plugin manager into the template directly. + + data/Makefile.am | 2 +- + data/eog-preferences-dialog.ui | 24 +++-- + src/eog-preferences-dialog.c | 205 +++++++++++++++++++++-------------------- + src/eog-preferences-dialog.h | 7 +- + src/eog-window.c | 4 +- + src/eog.gresource.xml | 1 + + 6 files changed, 129 insertions(+), 114 deletions(-) + +commit 94004b468f57673365a069d0654919dd9f2974a7 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Mar 14 21:24:34 2014 +0100 + + Initial GResource migration + + Embedding UI data files as GResource makes several things easier. + The compiled resources need to be linked directly with the binary + as they won't be available if linked with the embedded libeog. + + configure.ac | 1 + + data/Makefile.am | 16 +++++++--------- + src/Makefile.am | 8 +++++++- + src/eog-application.c | 10 +++++++--- + src/eog-properties-dialog.c | 7 ++----- + src/eog-window.c | 6 +++--- + src/eog.gresource.xml | 11 +++++++++++ + 7 files changed, 38 insertions(+), 21 deletions(-) + +commit a8343a6c56d8c0df225657f62e0011e694abae5f +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Mar 12 21:15:42 2014 +0100 + + EogPropertiesDialog: Convert to GtkBuilder template + + data/eog-image-properties-dialog.ui | 11 +- + src/eog-metadata-sidebar.c | 4 +- + src/eog-properties-dialog.c | 222 +++++++++++++++++++++--------------- + src/eog-properties-dialog.h | 9 +- + src/eog-window.c | 10 +- + src/eog-window.h | 2 +- + 6 files changed, 149 insertions(+), 109 deletions(-) + +commit b4d044366f94e55aed51622f281eb2a0497e47e6 +Author: Sami Jaktholm <sjakthol@outlook.com> +Date: Thu May 1 14:15:02 2014 +0300 + + Finnish help translation + + help/fi/fi.po | 4508 ++++++++++++++++++++++++++++++++++++++++----------------- + 1 file changed, 3145 insertions(+), 1363 deletions(-) + +commit 281fde73c4150ed18c9bbc67455f485c3ffcff13 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 28 23:38:08 2014 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 4eb910e4a6db5f7e03a40eb1ae98d7ca1bbc97e9 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 28 23:35:58 2014 +0200 + + Prepare for release 3.13.1 + + NEWS | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +commit ed8e8838cd07fb0bb6d97b76e1e0cf093d4559dd +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 28 23:22:07 2014 +0200 + + Update installed tests to work with latest GtkFileChooser + + The location entry is shown differently now and apparently there is + also a slightly longer timeout needed until one can press Enter. + + https://bugzilla.gnome.org/show_bug.cgi?id=727989 + + tests/common_steps.py | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 847fc70b24fdd7c5f276f41f0f3db755918e2221 +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Thu Apr 10 18:14:13 2014 +0200 + + Install tests using --enable-installed-tests switch + + Makefile.am | 4 ++ + configure.ac | 5 ++ + m4/behave-installed-tests.m4 | 137 +++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 146 insertions(+) + +commit 8dffb2f1c34c25ccfd48c2a45acd035e386e7ace +Author: Vadim Rutkovsky <vrutkovs@redhat.com> +Date: Thu Apr 10 18:13:19 2014 +0200 + + Add initial installed tests + + tests/actions.feature | 67 ++++++++++++++ + tests/common_steps.py | 245 ++++++++++++++++++++++++++++++++++++++++++++++++++ + tests/environment.py | 47 ++++++++++ + tests/gnome-logo.png | Bin 0 -> 11104 bytes + tests/steps/steps.py | 131 +++++++++++++++++++++++++++ + 5 files changed, 490 insertions(+) + +commit c9cfd7c85836a19b07d9edfca47692fd2f694e89 +Author: Rune Karlsson <kraputsniq@live.com> +Date: Mon Apr 28 20:29:25 2014 +0000 + + Updated Swedish translation + + po/sv.po | 948 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 541 insertions(+), 407 deletions(-) + +commit 11e586fc01a6023c68a35333b60535239c83bc2c +Author: Matthias Clasen <mclasen@redhat.com> +Date: Sat Apr 26 11:08:45 2014 -0400 + + Drop gnome-icon-theme dependency + + gnome-icon-theme got renamed to adwaita-icon-theme. And the + dependency is not really needed; depending on GTK+ should be + enough to guarantee the presence of a spec-compliant icon + theme. + + https://bugzilla.gnome.org/show_bug.cgi?id=729018 + + configure.ac | 2 -- + 1 file changed, 2 deletions(-) + +commit 48e971cbccc35b43e351fbefb41c4a54246b47ac +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Apr 2 22:10:24 2014 +0200 + + EogImage: Check GdkPixbuf for an ICC profile before falling back to sRGB + + If an image's ICC profile cannot be extracted check whether GdkPixbuf + was able to extract one before falling back to sRGB. This makes it + possible to color correct TIFF images. + + https://bugzilla.gnome.org/show_bug.cgi?id=727467 + + src/eog-image.c | 30 ++++++++++++++++++++++++++---- + 1 file changed, 26 insertions(+), 4 deletions(-) + +commit 7d1ec24210694cdb5a97f700c82e05c4e8e5f313 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Apr 26 18:16:22 2014 +0200 + + Post-branch version bump + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit ac5b75adb67bb7de194d0f88382572e469c165d5 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 14 21:46:26 2014 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8081aae2e717875cabfc390a0e0b8d649bc79ac6 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 14 21:43:55 2014 +0200 + + Prepare for release 3.12.1 + + NEWS | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +commit c118b3541d88d08723a174863217433076b08954 +Author: Dirgita <dirgitadevina@gmail.com> +Date: Thu Apr 10 05:49:58 2014 +0000 + + Updated Indonesian translation + + po/id.po | 357 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 180 insertions(+), 177 deletions(-) + +commit 980dfbc2458a43c95df1c24c3ee5e6c4269f9485 +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Wed Apr 9 13:49:12 2014 +0000 + + Updated French translation + + help/fr/fr.po | 83 +++++++++++++++++++++++++++-------------------------------- + 1 file changed, 38 insertions(+), 45 deletions(-) + +commit 36307a7013c33163a4eb13a3d30568a2fc07984a +Author: Gábor Kelemen <kelemeng@openscope.org> +Date: Wed Apr 2 14:26:54 2014 +0000 + + Updated Hungarian translation + + help/hu/hu.po | 110 ++++++++++++++++++++++++++-------------------------------- + 1 file changed, 49 insertions(+), 61 deletions(-) + +commit ca87a86da4bfe699ad1fc173c66538eb460d75ad +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Wed Apr 2 16:01:20 2014 +0200 + + Better Hungarian help screenshots, w/o residual English text + + help/hu/figures/multiple-convert.png | Bin 35272 -> 35665 bytes + help/hu/figures/multiple-rename-count.png | Bin 35985 -> 36264 bytes + 2 files changed, 0 insertions(+), 0 deletions(-) + +commit ddb5b92cd37480e35030f2ea3e788e2b38b99afa +Author: Marek Černocký <marek@manet.cz> +Date: Wed Apr 2 15:32:31 2014 +0200 + + Updated Czech translation + + help/cs/cs.po | 74 +++++++++++++++++++---------------------------------------- + 1 file changed, 23 insertions(+), 51 deletions(-) + +commit cde05f0fea2af2cfbee28bd595915b2884bb3398 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Wed Apr 2 13:23:23 2014 +0200 + + Improve phrasing of Hungarian translation + + po/hu.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 1d2743cd4d7135ce5a5c5cb47046693a1502f48e +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Wed Apr 2 13:01:13 2014 +0200 + + Updated Spanish translation + + help/es/es.po | 94 ++++++++++++++++++++++++++--------------------------------- + 1 file changed, 41 insertions(+), 53 deletions(-) + +commit defccd488531623fd0f4697e178a62ce08a39cc5 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Wed Apr 2 02:52:11 2014 +0200 + + Mark user visible strings for translation + + data/eog-multiple-save-as-dialog.ui | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit ade79ca56d900577cbd26ac4425409df9c7545ec +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Wed Apr 2 02:51:27 2014 +0200 + + Mark images as not translatable to keep them off translators radar + + help/C/index.page | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +commit d43a8d3d3c8e9beac7df4bf987dbbdecf25097ec +Author: Balázs Úr <urbalazs@src.gnome.org> +Date: Tue Apr 1 14:58:06 2014 +0200 + + Added localized picture + + help/hu/figures/multiple-convert.png | Bin 0 -> 35272 bytes + help/hu/figures/multiple-rename-count.png | Bin 0 -> 35985 bytes + help/hu/figures/plugins-all.png | Bin 98865 -> 98783 bytes + 3 files changed, 0 insertions(+), 0 deletions(-) + +commit 73d050017827081a0838afa54af5fdcb916d1567 +Author: Ikuya Awashiro <ikuya@fruitsbasket.info> +Date: Tue Apr 1 07:16:15 2014 +0900 + + l10n: Update Japanese translation + + po/ja.po | 11 +++++------ + 1 file changed, 5 insertions(+), 6 deletions(-) + +commit 2c991e02eeb889b6bc617ff1c1e8be555fa8d43e +Author: Balázs Úr <urbalazs@src.gnome.org> +Date: Fri Mar 28 22:53:08 2014 +0100 + + Added localized pictures + + help/hu/figures/eog-toolbar-editor.png | Bin 0 -> 34611 bytes + help/hu/figures/image-view-prefs.png | Bin 0 -> 35969 bytes + help/hu/figures/plugin-send-by-mail.png | Bin 0 -> 67543 bytes + help/hu/figures/plugins-all.png | Bin 0 -> 98865 bytes + help/hu/figures/prefs-plugins-date.png | Bin 0 -> 35556 bytes + help/hu/figures/prefs-plugins-fullscreen.png | Bin 0 -> 35495 bytes + help/hu/figures/prefs-plugins.png | Bin 0 -> 34333 bytes + help/hu/figures/slideshow-prefs.png | Bin 0 -> 26947 bytes + 8 files changed, 0 insertions(+), 0 deletions(-) + +commit 675bf9f3b6e8dc68354aac33622866f8a0fed0c9 +Author: Peter Vágner <pvdeejay@gmail.com> +Date: Tue Mar 25 18:02:31 2014 +0100 + + Updated slovak translation + + po/sk.po | 646 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 342 insertions(+), 304 deletions(-) + +commit 1c550a264a293e868e029724c3d0ae634fc3638d +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 24 23:09:27 2014 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a2a36f0ac3fa7c05abcdc57b179935d778febd70 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 24 23:07:13 2014 +0100 + + Prepare for release 3.12.0 + + NEWS | 18 ++++++++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 20 insertions(+), 2 deletions(-) + +commit b37d2c05eb9528f0e42df9235ef4f1fd7af9b6f0 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Mar 24 16:28:17 2014 +0100 + + Updated Spanish translation + + help/es/es.po | 1539 +++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 948 insertions(+), 591 deletions(-) + +commit 8e9b275a4ae4f64f5106c0b49b859eebc665cce9 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Mon Mar 24 22:56:39 2014 +0900 + + l10n: Update Japanese translation + + po/ja.po | 619 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 323 insertions(+), 296 deletions(-) + +commit 041a2979ac42049c66fa4d161678f60a6d698b27 +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Mon Mar 24 12:58:33 2014 +0000 + + Updated French translation + + help/fr/fr.po | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 7f6f31b8a040e6fb06961ecd46f49d21f78d6892 +Author: Gábor Kelemen <kelemeng@gnome.hu> +Date: Sun Mar 23 20:26:20 2014 +0000 + + Updated Hungarian translation + + help/hu/hu.po | 1531 +++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 942 insertions(+), 589 deletions(-) + +commit 34ccc5ba2854ffe725403d069ec78adc05a79d2b +Author: Marek Černocký <marek@manet.cz> +Date: Sun Mar 23 21:23:50 2014 +0100 + + Updated Czech translation + + help/cs/cs.po | 1480 ++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 935 insertions(+), 545 deletions(-) + +commit 6d3f978dd3a91055641a474365a09ff1ee355436 +Author: Andre Klapper <a9016009@gmx.de> +Date: Sun Mar 23 21:19:28 2014 +0100 + + User docs: Make page ID the same as file name + + help/C/bug-filing.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 2153a47449c1f6ea3578a77197f0d1ac5475aff0 +Author: Andre Klapper <a9016009@gmx.de> +Date: Sun Mar 23 21:18:57 2014 +0100 + + User docs: Fix 404 link + + help/C/develop.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d6cb9eef310e21d584884485a093f5d6b73b4b02 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Fri Mar 21 17:49:53 2014 +0100 + + Updated Basque language + + po/eu.po | 634 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 337 insertions(+), 297 deletions(-) + +commit 8d5808b28e5fd6c488f5c0423550a6d2ec4cfc77 +Author: Kenneth Nielsen <k.nielsen81@gmail.com> +Date: Thu Mar 20 22:13:14 2014 +0100 + + Updated Danish translation + + po/da.po | 631 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 335 insertions(+), 296 deletions(-) + +commit 29bbef5157e24aff955385d24d475a2b07ebbe4f +Author: Gábor Kelemen <kelemeng@gnome.hu> +Date: Wed Mar 19 14:25:50 2014 +0000 + + Updated Hungarian translation + + po/hu.po | 644 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 344 insertions(+), 300 deletions(-) + +commit 8c0db41f62e5a67c1392f9538af5260dce4cac70 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Wed Mar 19 07:32:31 2014 +0000 + + Updated Italian translation + + po/it.po | 649 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 347 insertions(+), 302 deletions(-) + +commit 1d345b37e20d95a4d07e63a0d3f549c493490676 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 17 19:21:36 2014 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 00ba1eb25e5d1eacaf06272569a68ea3e5b43226 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 17 19:18:41 2014 +0100 + + Prepare for release 3.11.92 + + NEWS | 24 ++++++++++++++++++++++++ + 1 file changed, 24 insertions(+) + +commit 6d65156c899e0c49c2c9e12a38178087c457a26c +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Sun Mar 16 14:22:31 2014 +0100 + + Updated Serbian translation + + po/sr.po | 696 ++++++++++++++++++++++++++++++--------------------------- + po/sr@latin.po | 696 ++++++++++++++++++++++++++++++--------------------------- + 2 files changed, 724 insertions(+), 668 deletions(-) + +commit 8595a9588316a731c6e58984710617f178899ac1 +Author: Frédéric Péters <fpeters@0d.be> +Date: Sun Mar 16 13:30:30 2014 +0100 + + Update French translation + + help/fr/fr.po | 1783 ++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 1006 insertions(+), 777 deletions(-) + +commit 0be5fdeeaeeb17727b0b812aa8a4224132031d29 +Author: Claude Paroz <claude@2xlibre.net> +Date: Sat Mar 15 16:37:24 2014 +0000 + + Updated French translation + + po/fr.po | 638 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 336 insertions(+), 302 deletions(-) + +commit 202ac1a64f2dd851157d51ca90c1240b8eb3faec +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Mar 15 12:30:32 2014 +0100 + + EogWindow: Indentation fix + + src/eog-window.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit e9cb288b025af3da24315f2b5724fa3bf388650b +Author: Felipe Ortiz <faortizc@gmail.com> +Date: Sat Mar 15 12:24:16 2014 +0100 + + EogWindow: Also update window title after saving + + Makes the window title match the displayed image's filename again. + + https://bugzilla.gnome.org/show_bug.cgi?id=720340 + + src/eog-window.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit 3733fcf078dc614f0596624c68d51f55f7710fbb +Author: Wolfgang Stöggl <c72578@yahoo.de> +Date: Thu Mar 13 21:10:56 2014 +0000 + + Updated German translation + + po/de.po | 643 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 345 insertions(+), 298 deletions(-) + +commit c69d92352aedf19879ce9c3f4e3058f9fdcc7b1e +Author: Tiagosdot <almosthumane@portugalmail.pt> +Date: Wed Mar 12 22:57:06 2014 +0000 + + Updated Portuguese translation + + po/pt.po | 641 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 341 insertions(+), 300 deletions(-) + +commit 4221e41defb4a54a7fc35ddb2718db7ae9a5790b +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Mar 12 19:37:11 2014 +0100 + + EogPropertiesDialog: Remove unused private members + + src/eog-properties-dialog.c | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +commit 4feef2c24f36c5dcb3f20c56f3480ec82ab2aab0 +Author: Paweł Żołnowski <pawel@zolnowski.name> +Date: Wed Mar 12 19:28:06 2014 +0100 + + Updated Polish translation + + po/pl.po | 634 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 336 insertions(+), 298 deletions(-) + +commit b9edcabd0956d77668f29ff28f4cd160bf870cb4 +Author: Yuri Myasoedov <ymyasoedov@yandex.ru> +Date: Mon Mar 10 12:47:30 2014 +0400 + + Updated Russian translation + + po/ru.po | 909 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 517 insertions(+), 392 deletions(-) + +commit 150774dfb75370f0bc07158c98f62201e9cbc821 +Author: A S Alam <apreet.alam@gmail.com> +Date: Fri Mar 7 20:35:53 2014 -0600 + + update Punjabi Translation 07March2014: Alam + + po/pa.po | 656 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 343 insertions(+), 313 deletions(-) + +commit 7c6d6ca1d86b7f2ca8ab7345d7ef45e393c75814 +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Fri Mar 7 23:31:09 2014 +0200 + + Updated Latvian translation + + po/lv.po | 637 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 341 insertions(+), 296 deletions(-) + +commit 848c74992bac153a68b62668c56b334b94c2d84a +Author: Changwoo Ryu <cwryu@debian.org> +Date: Wed Mar 5 20:19:22 2014 +0900 + + Updated Korean translation + + po/ko.po | 623 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 327 insertions(+), 296 deletions(-) + +commit 372bdb200744fa51d16c4c7a0209edc60e22d077 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 3 23:30:57 2014 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 3868afbcd9e9d2abf3cdd48cabc25640be29c64a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 3 23:28:11 2014 +0100 + + Prepare for release 3.11.91 + + NEWS | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +commit 80b536bcd2f08f314e10f47d3689283c7ae577a6 +Author: pdknsk <pdknsk@gmail.com> +Date: Mon Mar 3 22:58:16 2014 +0100 + + Allow color correcting images with alpha channel + + This is mostly useful for PNG images for now but could also help + with TIFF files in the future. LittleCMS will still ignore the + alpha channel, so this should be harmless. + + https://bugzilla.gnome.org/show_bug.cgi?id=725357 + + src/eog-image.c | 19 +++++++++---------- + 1 file changed, 9 insertions(+), 10 deletions(-) + +commit dfdc1874b09e06d47369d33c2b6bad9f0d664c5c +Author: pdknsk <pdknsk@gmail.com> +Date: Mon Mar 3 22:46:19 2014 +0100 + + Assume sRGB when image doesn't have an ICC profile attached + + This seems to be no problem with other image viewers and + is apparently also recommended by W3C. + + https://bugzilla.gnome.org/show_bug.cgi?id=554498 + + src/eog-image.c | 9 ++++++++- + 1 file changed, 8 insertions(+), 1 deletion(-) + +commit 1b0fb6b3e06bd2cc8e8055c0847d75311685f7c9 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Feb 28 22:52:56 2014 +0100 + + EogMetadataDetails: Improve fractional GPS coordinates support + + Increase displayed coordinate resolution for Exif GPS coordinates that + use fractional degrees for minutes or fractional minutes for seconds. + + https://bugzilla.gnome.org/show_bug.cgi?id=725416 + + src/eog-metadata-details.c | 31 +++++++++++++++++++++++++------ + 1 file changed, 25 insertions(+), 6 deletions(-) + +commit 4519bc5d91b6fd60c9ab864d697a96fb155c7f80 +Author: Pau Iranzo <paugnu@gmail.com> +Date: Wed Feb 26 00:04:56 2014 +0100 + + [l10n] Update Catalan translation + + po/ca.po | 644 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 342 insertions(+), 302 deletions(-) + +commit 603e8b95a348e00cac2e66fca301133708ec61e5 +Author: Sandeep Shedmake <sandeep.shedmake@gmail.com> +Date: Tue Feb 25 12:28:19 2014 +0000 + + Updated Marathi translation + + po/mr.po | 1941 +++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 1240 insertions(+), 701 deletions(-) + +commit de94d959ef2c435da8152cc227162cf8d0d6d123 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Sun Feb 23 21:56:19 2014 +0100 + + Updated Belarusian translation. + + po/be.po | 634 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 335 insertions(+), 299 deletions(-) + +commit bf3350aa517c2253ce270667c50846da47860dbc +Author: Andika Triwidada <andika@gmail.com> +Date: Sat Feb 22 03:33:12 2014 +0000 + + Updated Indonesian translation + + po/id.po | 641 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 338 insertions(+), 303 deletions(-) + +commit 007e5ab0731837f3e088ab678ca0e495fbdedc0f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 17 19:44:15 2014 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 61deddcb6aec7be497559de890d5ef11e30d4ab0 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 17 19:41:06 2014 +0100 + + Prepare for release 3.11.90 + + NEWS | 26 ++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 27 insertions(+), 1 deletion(-) + +commit ddb647a0fe91e59076f37cfb5db01285fec50f17 +Author: ngoswami <ngoswami@redhat.com> +Date: Tue Feb 11 13:19:25 2014 +0000 + + Updated Assamese translation + + po/as.po | 667 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 349 insertions(+), 318 deletions(-) + +commit 61566c4048d74df264969166f3175b8db5dff9f3 +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Mon Feb 10 23:52:55 2014 +0200 + + Updated Ukrainian translation + + po/uk.po | 652 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 350 insertions(+), 302 deletions(-) + +commit 0fe52fb2817ab7af3fce5d1d1d1d7268d19b7916 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Thu Feb 6 15:53:08 2014 +0200 + + Update Arabic translation + + po/ar.po | 635 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 334 insertions(+), 301 deletions(-) + +commit be3689eb49cdd2b8cd810a7f6eb5b6c7318108f1 +Author: Rober Ancell <robert.ancell@canonical.com> +Date: Wed Jan 15 15:44:59 2014 +1300 + + Use unity-control-center if in Unity + + src/eog-window.c | 17 +++++++++++++---- + 1 file changed, 13 insertions(+), 4 deletions(-) + +commit 1d0681aa1afa3af10bd1bd805443906ebfd71573 +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Wed Feb 5 20:23:01 2014 +0100 + + EogWindow: Fix the undo icon in RTL + + https://bugzilla.gnome.org/show_bug.cgi?id=723546 + + src/eog-window.c | 3 +++ + 1 file changed, 3 insertions(+) + +commit 54635a542a89bbb00de3cfee9f5bf325c1f39608 +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Mon Feb 3 19:22:38 2014 +0200 + + EogWindow: Fix the previous and the next icons in RTL + + https://bugzilla.gnome.org/show_bug.cgi?id=723544 + + src/eog-window.c | 5 +++++ + 1 file changed, 5 insertions(+) + +commit ce1610c862dbeab80227e426a8da582f7e39ffff +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Wed Feb 5 17:00:45 2014 +0700 + + Updated Thai translation + + po/th.po | 642 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 340 insertions(+), 302 deletions(-) + +commit 41d46a1a4fe02601c93cc466950442264cbf333f +Author: GunChleoc <fios@foramnagaidhlig.net> +Date: Tue Feb 4 14:53:31 2014 +0000 + + Updated Scottish Gaelic translation + + po/gd.po | 981 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 569 insertions(+), 412 deletions(-) + +commit f1ce40c6039b8ea874f3eabe7ae118e8cecc3b0e +Author: Rafael Ferreira <rafael.f.f1@gmail.com> +Date: Sun Feb 2 01:29:00 2014 +0000 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 38 +++++++++++++++++++------------------- + 1 file changed, 19 insertions(+), 19 deletions(-) + +commit d4418178f012536d1a3de6ff67a02d3323c7b13e +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Fri Jan 31 23:03:52 2014 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 659 ++++++++++++++++++++++++++++++----------------------------- + po/zh_TW.po | 663 +++++++++++++++++++++++++++++++----------------------------- + 2 files changed, 692 insertions(+), 630 deletions(-) + +commit b6ff8d5c9c574d65693c5337dffe8b65724d591a +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Jan 31 15:00:35 2014 +0100 + + Revert "Updated FSF's address" + + This reverts commit 7703d5b1298061008afe7aa1c76cd83e0ee9a14e. + + po/ar.po | 8 +++++++- + po/ast.po | 7 ++++++- + po/be@latin.po | 8 +++++++- + po/bn.po | 3 ++- + po/bn_IN.po | 7 ++++++- + po/br.po | 2 +- + po/da.po | 7 ++++++- + po/dz.po | 2 +- + po/en@shaw.po | 7 ++++++- + po/en_GB.po | 7 ++++++- + po/es.po | 3 ++- + po/fa.po | 3 ++- + po/fur.po | 3 ++- + po/fy.po | 3 ++- + po/gl.po | 7 ++++++- + po/he.po | 7 ++++++- + po/hr.po | 3 ++- + po/kk.po | 7 ++++++- + po/kn.po | 7 ++++++- + po/ks.po | 3 ++- + po/ku.po | 3 ++- + po/lv.po | 7 ++++++- + po/mai.po | 3 ++- + po/mk.po | 7 ++++++- + po/ml.po | 7 ++++++- + po/mr.po | 7 ++++++- + po/my.po | 3 ++- + po/nds.po | 2 +- + po/ne.po | 3 ++- + po/nn.po | 7 ++++++- + po/oc.po | 7 ++++++- + po/or.po | 7 ++++++- + po/pa.po | 3 ++- + po/ps.po | 2 +- + po/pt.po | 3 ++- + po/ro.po | 8 +++++++- + po/si.po | 3 ++- + po/sq.po | 3 ++- + po/sv.po | 7 ++++++- + po/ta.po | 3 ++- + po/te.po | 7 ++++++- + po/th.po | 7 ++++++- + po/tr.po | 3 ++- + po/ug.po | 3 ++- + po/uk.po | 7 ++++++- + po/uz.po | 2 +- + po/uz@cyrillic.po | 2 +- + po/vi.po | 3 ++- + po/zh_CN.po | 3 ++- + 49 files changed, 187 insertions(+), 49 deletions(-) + +commit 7703d5b1298061008afe7aa1c76cd83e0ee9a14e +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu Jan 23 12:49:19 2014 +0100 + + Updated FSF's address + + po/ar.po | 8 +------- + po/ast.po | 7 +------ + po/be@latin.po | 8 +------- + po/bn.po | 3 +-- + po/bn_IN.po | 7 +------ + po/br.po | 2 +- + po/da.po | 7 +------ + po/dz.po | 2 +- + po/en@shaw.po | 7 +------ + po/en_GB.po | 7 +------ + po/es.po | 3 +-- + po/fa.po | 3 +-- + po/fur.po | 3 +-- + po/fy.po | 3 +-- + po/gl.po | 7 +------ + po/he.po | 7 +------ + po/hr.po | 3 +-- + po/kk.po | 7 +------ + po/kn.po | 7 +------ + po/ks.po | 3 +-- + po/ku.po | 3 +-- + po/lv.po | 7 +------ + po/mai.po | 3 +-- + po/mk.po | 7 +------ + po/ml.po | 7 +------ + po/mr.po | 7 +------ + po/my.po | 3 +-- + po/nds.po | 2 +- + po/ne.po | 3 +-- + po/nn.po | 7 +------ + po/oc.po | 7 +------ + po/or.po | 7 +------ + po/pa.po | 3 +-- + po/ps.po | 2 +- + po/pt.po | 3 +-- + po/ro.po | 8 +------- + po/si.po | 3 +-- + po/sq.po | 3 +-- + po/sv.po | 7 +------ + po/ta.po | 3 +-- + po/te.po | 7 +------ + po/th.po | 7 +------ + po/tr.po | 3 +-- + po/ug.po | 3 +-- + po/uk.po | 7 +------ + po/uz.po | 2 +- + po/uz@cyrillic.po | 2 +- + po/vi.po | 3 +-- + po/zh_CN.po | 3 +-- + 49 files changed, 49 insertions(+), 187 deletions(-) + +commit a1b150c0d252c015f5d8ada084a4fed2e36a3eaf +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Sat Jan 25 22:22:27 2014 +0200 + + Updated Lithuanian translation + + po/lt.po | 648 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 344 insertions(+), 304 deletions(-) + +commit 62e10d895bccdcdba2ba61d31ec13ed7dc5df57b +Author: Yosef Or Boczko <yoseforb@src.gnome.org> +Date: Sat Jan 25 21:15:43 2014 +0200 + + Updated Hebrew translation + + po/he.po | 64 +++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 35 insertions(+), 29 deletions(-) + +commit 4ecc1d1e5c480b124f2794127a231a5e74995dd5 +Author: Shankar Prasad <prasad.mvs@gmail.com> +Date: Wed Jan 22 14:35:12 2014 +0530 + + updated kn.po + + po/kn.po | 1474 +++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 793 insertions(+), 681 deletions(-) + +commit bcd54506991a0c141f8719ecebb6023f83ab5be6 +Author: Vangelis Skarmoutsos <skarmoutsosv@gmail.com> +Date: Mon Jan 20 09:27:08 2014 +0200 + + Updated Greek translation + + po/el.po | 263 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 132 insertions(+), 131 deletions(-) + +commit 0f487cfc7c69c42d18a12aff23ddde15ae652d60 +Author: Mattias Põldaru <mahfiaz@gmail.com> +Date: Fri Jan 17 17:45:23 2014 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 79 ++++++++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 54 insertions(+), 25 deletions(-) + +commit 076184a1a8172634543b542392b7424273ed3a11 +Author: Marek Černocký <marek@manet.cz> +Date: Thu Jan 16 20:53:42 2014 +0100 + + Updated Czech translation + + po/cs.po | 636 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 335 insertions(+), 301 deletions(-) + +commit b0fdf3cb1b8d086e804ef3bce469a2c2379cf7a2 +Author: Jiri Grönroos <jiri.gronroos+l10n@iki.fi> +Date: Wed Jan 15 15:02:20 2014 +0200 + + Finnish translation update + + po/fi.po | 354 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 177 insertions(+), 177 deletions(-) + +commit b969726cdd9e894ab9851e393f4395b7486fcc44 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 13 21:34:47 2014 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 59bee0c23105f737d90d8f30732b5a7297e2fa03 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 13 21:30:18 2014 +0100 + + Prepare for release 3.11.4 + + NEWS | 22 ++++++++++++++++++++++ + 1 file changed, 22 insertions(+) + +commit 757128bc3792cca59115df3b956bffedd3732214 +Author: Lars Uebernickel <lars.uebernickel@canonical.com> +Date: Tue Jan 7 12:18:19 2014 +0100 + + Don't call gdk_threads_init() + + Accessing gdk from outside the main thread is deprecated. + + This also replaces an occurence of gdk_threads_add_idle_full() with an + idle source that is dispatched to the main thread. + + https://bugzilla.gnome.org/show_bug.cgi?id=721755 + + src/eog-image.c | 6 +++--- + src/main.c | 1 - + 2 files changed, 3 insertions(+), 4 deletions(-) + +commit 789afdc1647342ea905104db873fe86aba928708 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Jan 7 23:07:26 2014 +0100 + + Use Python 3.x for Python plugins + + src/eog-plugin-engine.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 548240b730630dbfdbcc0a1de9c715f7b57d98d3 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Jan 7 19:16:39 2014 +0100 + + Update FSF address + + The FSF changed its address quite some time ago. Modify the license + headers to contain the new one. Also update the central COPYING + text to the current text from the FSF homepage, which purges some + stray form feed chars in the process. + + https://bugzilla.gnome.org/show_bug.cgi?id=721488 + + COPYING | 41 +++++++++++----------- + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 6 ++-- + cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 6 ++-- + cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 6 ++-- + cut-n-paste/toolbar-editor/egg-toolbar-editor.h | 6 ++-- + cut-n-paste/toolbar-editor/egg-toolbars-model.c | 6 ++-- + cut-n-paste/toolbar-editor/egg-toolbars-model.h | 6 ++-- + jpegutils/transupp-6b.c | 6 ++-- + jpegutils/transupp-6b.h | 6 ++-- + jpegutils/transupp-8a.c | 6 ++-- + plugins/statusbar-date/eog-statusbar-date-plugin.c | 6 ++-- + plugins/statusbar-date/eog-statusbar-date-plugin.h | 6 ++-- + src/eog-application-internal.h | 6 ++-- + src/eog-application.c | 6 ++-- + src/eog-application.h | 6 ++-- + src/eog-close-confirmation-dialog.c | 7 ++-- + src/eog-close-confirmation-dialog.h | 7 ++-- + src/eog-config-keys.h | 6 ++-- + src/eog-debug.c | 6 ++-- + src/eog-debug.h | 6 ++-- + src/eog-dialog.c | 6 ++-- + src/eog-dialog.h | 6 ++-- + src/eog-enums.h | 6 ++-- + src/eog-error-message-area.c | 8 ++--- + src/eog-error-message-area.h | 8 ++--- + src/eog-exif-util.c | 6 ++-- + src/eog-exif-util.h | 6 ++-- + src/eog-file-chooser.c | 7 ++-- + src/eog-file-chooser.h | 7 ++-- + src/eog-image-jpeg.c | 7 ++-- + src/eog-image-private.h | 6 ++-- + src/eog-image.c | 6 ++-- + src/eog-image.h | 6 ++-- + src/eog-job-scheduler.c | 6 ++-- + src/eog-job-scheduler.h | 6 ++-- + src/eog-jobs.c | 6 ++-- + src/eog-jobs.h | 6 ++-- + src/eog-list-store.c | 6 ++-- + src/eog-list-store.h | 6 ++-- + src/eog-metadata-details.c | 6 ++-- + src/eog-metadata-details.h | 6 ++-- + src/eog-metadata-reader-jpg.c | 6 ++-- + src/eog-metadata-reader-jpg.h | 6 ++-- + src/eog-metadata-reader-png.c | 6 ++-- + src/eog-metadata-reader-png.h | 6 ++-- + src/eog-metadata-reader.c | 6 ++-- + src/eog-metadata-reader.h | 6 ++-- + src/eog-plugin-engine.c | 6 ++-- + src/eog-plugin-engine.h | 6 ++-- + src/eog-preferences-dialog.c | 6 ++-- + src/eog-preferences-dialog.h | 6 ++-- + src/eog-print-image-setup.c | 6 ++-- + src/eog-print-image-setup.h | 6 ++-- + src/eog-print-preview.c | 6 ++-- + src/eog-print-preview.h | 6 ++-- + src/eog-print.c | 6 ++-- + src/eog-print.h | 6 ++-- + src/eog-properties-dialog.c | 6 ++-- + src/eog-properties-dialog.h | 6 ++-- + src/eog-session.c | 6 ++-- + src/eog-session.h | 6 ++-- + src/eog-sidebar.c | 6 ++-- + src/eog-sidebar.h | 6 ++-- + src/eog-statusbar.c | 6 ++-- + src/eog-statusbar.h | 6 ++-- + src/eog-thumb-nav.c | 6 ++-- + src/eog-thumb-nav.h | 6 ++-- + src/eog-thumb-view.c | 6 ++-- + src/eog-thumb-view.h | 6 ++-- + src/eog-thumbnail.c | 6 ++-- + src/eog-thumbnail.h | 6 ++-- + src/eog-util.c | 6 ++-- + src/eog-util.h | 6 ++-- + src/eog-window.c | 6 ++-- + src/eog-window.h | 6 ++-- + src/main.c | 6 ++-- + src/zoom.c | 6 ++-- + src/zoom.h | 6 ++-- + 78 files changed, 253 insertions(+), 259 deletions(-) + +commit 7eff8509cb0e19a885d6fdc783710fd877a23650 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Tue Jan 7 16:30:34 2014 +0500 + + Tajik translation updated + + po/tg.po | 22 +++++++++++----------- + 1 file changed, 11 insertions(+), 11 deletions(-) + +commit 7394f37ddc02f5ca3da49537407e65daa1d31b51 +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Sat Jan 4 22:10:29 2014 +0200 + + Updated Greek translation + + po/el.po | 312 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 156 insertions(+), 156 deletions(-) + +commit 0a4e7b586c720dbb742f2da901c6e0ac3f3b1d48 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 31 15:42:17 2013 +0100 + + EogScrollView: Fix unitialized data usage + + src/eog-scroll-view.c | 1 + + 1 file changed, 1 insertion(+) + +commit 4b1fef8f240e3fd6592a7e579c46f79760a74418 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Dec 27 17:42:30 2013 +0100 + + Improve screenshot PNG compression + + data/screenshot.png | Bin 77624 -> 68590 bytes + 1 file changed, 0 insertions(+), 0 deletions(-) + +commit ddf9b229e4fab957914359a42df326258fae08f8 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Mon Dec 23 20:05:47 2013 +0100 + + Updated Slovenian translation + + po/sl.po | 298 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 152 insertions(+), 146 deletions(-) + +commit 24008884caace078031a3413d2f8d46cf6529cc1 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Mon Dec 23 10:28:15 2013 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 298 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 150 insertions(+), 148 deletions(-) + +commit dd456e78b46a2e8b028c7c95e10501bba6996835 +Author: Tong Hui <tonghuix@gmmail.com> +Date: Sun Dec 22 23:30:49 2013 +0800 + + Update Chinese simplified translation + + po/zh_CN.po | 639 ++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 337 insertions(+), 302 deletions(-) + +commit da5d5ab3302a795f68b7df4f448cad12a2c4bb03 +Author: Yosef Or Boczko <yoseforb@gmail.com> +Date: Sun Dec 22 00:29:30 2013 +0200 + + Updated Hebrew translation + + Signed-off-by: Yosef Or Boczko <yoseforb@gmail.com> + + po/he.po | 498 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 262 insertions(+), 236 deletions(-) + +commit 97dc6d7cdae8a071114d0dd5e0aadd60601929da +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Thu Dec 19 01:45:53 2013 +0100 + + Updated Galician translations + + po/gl.po | 297 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 151 insertions(+), 146 deletions(-) + +commit 496dda998335f00bf169f9da7b17b0f28a154d94 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Wed Dec 18 19:26:00 2013 +0100 + + Fix screenshot in appdata file + + data/eog.appdata.xml.in | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 86d4720ef8abb6450fc35728c0b05bc45ad9dedf +Author: William Jon McCann <william.jon.mccann@gmail.com> +Date: Wed Dec 18 09:10:05 2013 -0500 + + Update project homepage url and screenshot + + data/eog.appdata.xml.in | 4 ++-- + data/screenshot.png | Bin 0 -> 77624 bytes + eog.doap | 2 +- + src/eog-window.c | 2 +- + 4 files changed, 4 insertions(+), 4 deletions(-) + +commit 08a8460a6a3aaea65d25b8f94007be4551ee184a +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 17 15:53:10 2013 +0100 + + EogImage: Slight optimization of private data structure + + - Remove/Disable unused members + - Close memory hole on 64-bit + + src/eog-image-private.h | 9 +++++---- + src/eog-image.c | 3 +-- + 2 files changed, 6 insertions(+), 6 deletions(-) + +commit 75a803c36789d70b37086ef584066089403a97d7 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 16 23:04:52 2013 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 3b6d3ae232a5add2f11b7e8e852d7975ecf31cfe +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 16 23:00:34 2013 +0100 + + Prepare for release 3.11.3 + + NEWS | 25 +++++++++++++++++++++++++ + 1 file changed, 25 insertions(+) + +commit 0f1bf1c33d8644cba270f0865b7cbe8d47ceebe2 +Author: Michael Catanzaro <mcatanzaro@gnome.org> +Date: Mon Dec 9 15:51:06 2013 -0600 + + app menu: standardize Help/About/Quit + + Use "About" instead of "About Image Viewer" + + https://wiki.gnome.org/Design/HIG/ApplicationMenus + + https://bugzilla.gnome.org/show_bug.cgi?id=720144 + + data/eog-app-menu.xml | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ae405f187935eb656d110a4bb421dacf9cdc34a6 +Author: Jiri Grönroos <jiri.gronroos+l10n@iki.fi> +Date: Mon Dec 9 08:06:09 2013 +0200 + + Finnish translation update + + po/fi.po | 634 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 325 insertions(+), 309 deletions(-) + +commit cdda72568d1e217f682a77a9857aff163d40ab16 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Dec 6 00:14:41 2013 +0100 + + Raise GTK+ dependency to 3.10.6 + + This is to avoid a bug in previous GTK versions that caused + the window to be too small and unnecessary scale images down. + + https://bugzilla.gnome.org/show_bug.cgi?id=690236 + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit de5abd6eec8e531dc4a095ef902bcd1ce9220198 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Tue Dec 3 12:30:46 2013 +0500 + + Tajik translation updated + + po/tg.po | 126 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 64 insertions(+), 62 deletions(-) + +commit 6234908eed68d1bbe92c84796012fae4f32be026 +Author: Rafael Ferreira <rafael.f.f1@gmail.com> +Date: Mon Dec 2 22:20:06 2013 -0200 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 624 ++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 332 insertions(+), 292 deletions(-) + +commit c84128ab33b2751b2456f27e518ecbd515581dbf +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Dec 1 15:19:30 2013 +0100 + + EogWindow: Export current image over D-Bus + + This exports the current image and collection size through the state + of a custom action. The state is read-only. + + https://bugzilla.gnome.org/show_bug.cgi?id=712350 + + src/eog-window.c | 24 ++++++++++++++++++++++++ + 1 file changed, 24 insertions(+) + +commit 58f8a7bbefd838b96d3632bb3762b7729e98817a +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 27 22:20:27 2013 +0100 + + EogWindow: Export zoom and rotation functions on the D-Bus + + Wrap the corresponding GtkActions as GActions making them available + on the D-Bus as per-window action. + + https://bugzilla.gnome.org/show_bug.cgi?id=712350 + + src/eog-window.c | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 87 insertions(+), 1 deletion(-) + +commit 7926f086011b95b4f9aea168862998d35095642a +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Tue Nov 26 11:57:12 2013 +0100 + + Updated Spanish translation + + po/es.po | 126 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 64 insertions(+), 62 deletions(-) + +commit 5ce723fec170c2eca89103d79742578462b0ac9e +Author: Ryan Lortie <desrt@desrt.ca> +Date: Thu Nov 21 12:56:30 2013 -0500 + + EogWindow: export some actions on the bus + + Expose a few useful actions in GAction form so that they can be hit from + D-Bus. + + https://bugzilla.gnome.org/show_bug.cgi?id=712350 + + src/eog-window.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 52 insertions(+) + +commit 7e0493275d0503f2d621edb4ac57893eb643e7e3 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 25 19:57:08 2013 +0100 + + EogFileChooser: Remove deprecated GtkStock usage + + src/eog-file-chooser.c | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +commit e370c598356692ed1d6adbb3465b47fd84cf7999 +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Sat Nov 23 20:22:02 2013 +0200 + + Updated Greek help translation + + help/el/el.po | 1584 +++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 976 insertions(+), 608 deletions(-) + +commit bbe4a87a73327dbce3f8e3249f038592e77398d0 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Nov 22 23:52:58 2013 +0100 + + EogWindow: Drop deprecated GtkStyle usage + + The call to gtk_widget_set_style was actually useless since + commit f9a5ec65. + + src/eog-window.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 7d2cf4d8986ccf5bde28c612502c489af216ba9a +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Nov 22 23:25:12 2013 +0100 + + EogPropertiesDialog: Allow RGBA for transparent background color + + Now that it is supported in EogScrollView there's no reason not + to allow setting an alpha value for the color. + + data/eog-preferences-dialog.ui | 6 ++++-- + src/eog-preferences-dialog.c | 38 ++++++++++++++++++-------------------- + 2 files changed, 22 insertions(+), 22 deletions(-) + +commit 823a4cdf43d23fc7da3bdea5dfcfc3cb5c711c63 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Nov 22 23:22:39 2013 +0100 + + EogScrollView: Switch to GdkRGBA for background and transparent colors + + This allows passing the colors more or less directly to cairo + without having to convert it from and to the GdkColor format. + + src/eog-scroll-view.c | 137 ++++++++++++++++++++++---------------------------- + src/eog-scroll-view.h | 8 +-- + 2 files changed, 65 insertions(+), 80 deletions(-) + +commit ef0feee32abc6824da71275857514ad85d8df6e0 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Thu Nov 21 21:14:15 2013 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 613 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 320 insertions(+), 293 deletions(-) + +commit 9da99605e21afb5eb26c37ebcd666e12de1b03b7 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 18 23:21:38 2013 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a9ca8bb9f098ecc24dace1a2b3ca65270f4c434f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 18 23:17:40 2013 +0100 + + Prepare for release 3.11.2 + + NEWS | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +commit aae3be0031991749d60631080867c403a7fd7348 +Author: Jasper Lievisse Adriaanse <jasper@humppa.nl> +Date: Fri Nov 15 09:01:49 2013 +0100 + + Prevent redeclaration of typedef 'EogJob'. + + https://bugzilla.gnome.org/show_bug.cgi?id=712354 + + src/eog-jobs.h | 4 ++++ + 1 file changed, 4 insertions(+) + +commit 13c04331362cf2bdc31e85d030f6fda326c44cb6 +Author: Wouter Bolsterlee <uws@xs4all.nl> +Date: Sun Nov 10 14:22:14 2013 +0100 + + Updated Dutch translation + + po/nl.po | 625 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 329 insertions(+), 296 deletions(-) + +commit 1556122acf5b021476a470944840b3077a37dcdc +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Mon Nov 4 10:59:27 2013 +0200 + + Updated Greek translation + + po/el.po | 490 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 260 insertions(+), 230 deletions(-) + +commit fb3a5e1ad633716564c2ba4bf58dfca469bf7cee +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Fri Nov 1 15:44:04 2013 +0100 + + Updated Galician translations + + po/gl.po | 618 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 326 insertions(+), 292 deletions(-) + +commit a85800c5bdf50e8be3b78d2d3e15515315c527c9 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Thu Oct 31 20:42:43 2013 +0100 + + Updated Slovenian translation + + po/sl.po | 476 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 250 insertions(+), 226 deletions(-) + +commit 60c34dcda1d0629764ba2c48a92443b4c20c75a0 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu Oct 31 18:21:20 2013 +0100 + + Updated Spanish translation + + po/es.po | 413 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 222 insertions(+), 191 deletions(-) + +commit cee1f77d67767487f6cf12a01f122e2d7f11b275 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 30 20:58:12 2013 +0100 + + EogMetadataSidebar: Allow filename to be wrapped at char boundaries + + It is possible for this field to contain no "word". + Enable wrapping at char boundaries as fallback so that such files + don't cause the sidebar enlarging too much. + + https://bugzilla.gnome.org/show_bug.cgi?id=700717 + + src/eog-metadata-sidebar.c | 5 +++++ + 1 file changed, 5 insertions(+) + +commit 0e19aed870ee84ac83fcebcec3def2f8d1bf971f +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 30 20:34:29 2013 +0100 + + EogCloseConfirmationDialog: Use symbolic icon variant + + Other message dialogs do this as well. This brings the close + confirmation back in sync. + + src/eog-close-confirmation-dialog.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 4188b5145d989755f8e554fdcde0a7cef4c49a4e +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Wed Oct 30 23:41:25 2013 +0500 + + Tajik translation updated + + po/tg.po | 414 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 223 insertions(+), 191 deletions(-) + +commit bfe3c4a92ebd7c4e58cadfdcb286f1e087359dc6 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 30 19:32:17 2013 +0100 + + EogPropertiesDialog: Make the details view use all available space + + src/eog-properties-dialog.c | 1 + + 1 file changed, 1 insertion(+) + +commit 04d53c3c8d475c259c477f627038849ae79dd6ed +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 30 19:27:49 2013 +0100 + + EogPropertiesDialog: Separate Exif/XMP-specific widgets from generic ones + + This is just renaming a few widgets. + + https://bugzilla.gnome.org/show_bug.cgi?id=509406 + + data/eog-image-properties-dialog.ui | 8 +++---- + src/eog-properties-dialog.c | 44 ++++++++++++++++++------------------- + 2 files changed, 26 insertions(+), 26 deletions(-) + +commit 5a497db13c81ac3dbe13456724faf9d7431e976a +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 30 19:07:53 2013 +0100 + + EogMetadataDetails: Don't install header file + + This is not really useful for plugins. + + src/Makefile.am | 6 ++++-- + src/eog-metadata-details.h | 4 ++++ + 2 files changed, 8 insertions(+), 2 deletions(-) + +commit 2969a58b0ceeb8c6af1e04c39aa230e72b70ea20 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 30 19:05:12 2013 +0100 + + EogExifDetails: Rename to EogMetadataDetails + + The widget is not specific to Exif, and is used for XMP as well. + + https://bugzilla.gnome.org/show_bug.cgi?id=509406 + + doc/reference/Makefile.am | 2 +- + po/POTFILES.in | 2 +- + src/Makefile.am | 10 +-- + src/eog-exif-details.h | 72 ------------------ + src/{eog-exif-details.c => eog-metadata-details.c} | 88 +++++++++++----------- + src/eog-metadata-details.h | 74 ++++++++++++++++++ + src/eog-properties-dialog.c | 8 +- + 7 files changed, 129 insertions(+), 127 deletions(-) + +commit 8b8c67d7ed3603cce25ed72482bbbafba8f0d90f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 28 23:14:42 2013 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit e1b23e070ae22ff12a73a3e2ea07e6a8f08d2998 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 28 23:10:51 2013 +0100 + + Update for release 3.11.1 + + NEWS | 33 +++++++++++++++++++++++++++++++++ + 1 file changed, 33 insertions(+) + +commit 4e0d34351c941cf0d8ea4573ee5766525afd5687 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 28 21:39:08 2013 +0100 + + EogCloseConfirmationDialog: Really fix GtkStock usage + + This was incomplete in commit f0a2faf9. + + src/eog-close-confirmation-dialog.c | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 6701f4e8b778122491e94f59a5c70ebd632c799f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 28 21:09:42 2013 +0100 + + EogPreferencesDialog: Make the colorbuttons align more nicely + + Adjust spacing to labels so both colorbuttons are likely to be aligned. + + data/eog-preferences-dialog.ui | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 4d438b259fa73c9bd8c8e081c75a273b4e0b3f01 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 28 20:57:56 2013 +0100 + + configure: Drop unneeded check for Sunkeysym header + + eog doesn't use any of these defined keyboard codes anymore. + + configure.ac | 7 ------- + 1 file changed, 7 deletions(-) + +commit e834eec552cebffea9d57a00269d0512074fb9ee +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 28 20:54:50 2013 +0100 + + Remove long replaced toolbar definition + + This lives in eog-toolbar.xml now. + + data/eog-ui.xml | 12 ------------ + 1 file changed, 12 deletions(-) + +commit 305d2c52a38c0291a3e06055bcfad82d2d1a6e6c +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 28 20:46:54 2013 +0100 + + Overhaul batch save as dialog + + - Make the XML fit for recent Glade versions + - Replace deprecated GtkTables with GtkGrids + - Fix the filename preview's size extending behaviour + - Remove stock buttons + + data/eog-multiple-save-as-dialog.ui | 477 +++++++++++++----------------------- + 1 file changed, 167 insertions(+), 310 deletions(-) + +commit 8f83ae4397bf7a477a154e5712b799fa43c60187 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Oct 27 12:55:27 2013 +0100 + + Use intltool's GSettings support + + Necessary to be able to build the AppData XML in the same folder. + + https://bugzilla.gnome.org/show_bug.cgi?id=708757 + + configure.ac | 4 +- + data/Makefile.am | 8 +-- + data/org.gnome.eog.gschema.xml.in | 133 +++++++++++++++++++++++++++++++++++ + data/org.gnome.eog.gschema.xml.in.in | 133 ----------------------------------- + po/POTFILES.in | 2 +- + po/POTFILES.skip | 1 - + 6 files changed, 140 insertions(+), 141 deletions(-) + +commit 44866d5177903e79d0fb1b9f2e313ae087bc3358 +Author: Richard Hughes <richard@hughsie.com> +Date: Wed Sep 25 15:55:12 2013 +0100 + + Add an AppData file + + See http://people.freedesktop.org/~hughsient/appdata/ for details. + + https://bugzilla.gnome.org/show_bug.cgi?id=708757 + + data/Makefile.am | 8 ++++++++ + data/eog.appdata.xml.in | 23 +++++++++++++++++++++++ + po/POTFILES.in | 1 + + 3 files changed, 32 insertions(+) + +commit 99e05c3a8f215b9fd38715ebaad2b7e0d1efd756 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Sun Oct 27 13:44:22 2013 +0500 + + Tajik translation updated + + po/tg.po | 478 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 242 insertions(+), 236 deletions(-) + +commit 788142761773e538e647a840f3b6363f8b2aae4d +Author: Yosef Or Boczko <yoseforb@gmail.com> +Date: Sun Oct 27 02:49:37 2013 +0200 + + Updated Hebrew translation + + po/he.po | 482 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 245 insertions(+), 237 deletions(-) + +commit a633e6c442e8e7ac7ab278fb7698895572d9189a +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 25 18:12:00 2013 +0200 + + Raise version to cleary mark this as development version again + + Release 3.11.1 will be next. + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 74c9c1617292823f86fd00bd94c01614b9db33b6 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 25 17:57:37 2013 +0200 + + Raise GTK+ dependency for GtkRevealer + + GtkRevealer came with GTK+ 3.9.0. + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 2fbff4bbbda33441c841cca3a6723579e9298c6b +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 25 17:51:55 2013 +0200 + + EogWindow: Use GtkOverlay and GtkRevealer for fullscreen toolbar + + Allows removing the previous hack using an overlaid popup window. + Also produces a nice animation when showing/hiding the toolbar and + makes the toolbar not hide the sidebar. + + src/eog-window.c | 76 +++++++++++++++++++------------------------------------- + 1 file changed, 25 insertions(+), 51 deletions(-) + +commit 0f7988cf16c8181d1b984130034556c59a1fa690 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 23 18:57:47 2013 +0200 + + Add more debug output to initial window size calculation + + Should help debugging the common problems here. + + src/eog-window.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +commit 32858a5a3d78b235e7fb2abf25497f3ceec01741 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Oct 25 16:40:12 2013 +0200 + + Updated Spanish translation + + po/es.po | 478 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 242 insertions(+), 236 deletions(-) + +commit d050ee9a7bcc8ccaab0ac233576bd6e09225555d +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Thu Oct 24 21:09:23 2013 +0200 + + Updated Slovenian translation + + po/sl.po | 475 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 241 insertions(+), 234 deletions(-) + +commit ccdd01142cd17f8f8568888caf807c8b4643e65d +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Thu Oct 24 15:30:33 2013 +0300 + + Updated Greek translation + + po/el.po | 527 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 266 insertions(+), 261 deletions(-) + +commit ae8107fedee8da359c0559b931dd794e6828cf76 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 19 00:44:05 2013 +0200 + + EogWindow: Fix GtkStock usage + + Stop using the GtkStock interface and self-select text and icon. + + src/eog-window.c | 61 ++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 33 insertions(+), 28 deletions(-) + +commit c19345e9cd56ea372eaab7bf20b7de3d2fcfa892 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Oct 3 16:42:44 2013 +0200 + + EogScrollView: Convert to GtkGrid + + GtkTable is deprecated. + + src/eog-scroll-view.c | 33 ++++++++++++++------------------- + src/eog-scroll-view.h | 4 ++-- + 2 files changed, 16 insertions(+), 21 deletions(-) + +commit 2ad01250cb10a76a3d4c1c12141d4fefdc012437 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 18 23:44:15 2013 +0200 + + Modernize configure.ac + + - Require libtool 2.2 + Nobody seems to use libtool 1.x anymore, allows dropping more deprecated + libtool macros + - AC_HELP_STRING -> AS_HELP_STRING + - AC_TRY_CPP/LINK -> AC_PREPROC/LINK + - Try making the indentation more consistent + + configure.ac | 147 +++++++++++++++++++++++++++++------------------------------ + 1 file changed, 73 insertions(+), 74 deletions(-) + +commit 3a8850d8832ff589c7191c85d0bbc2900f78a76b +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 18 22:08:43 2013 +0200 + + Remove deprecated autoconf macros + + GNOME_COMMON_INIT is deprecated since 2010 and definetely obsolete in + eog since commit 08aca771ca. + AC_ISC_POSIX is not needed anymore on modern systems. + + configure.ac | 2 -- + 1 file changed, 2 deletions(-) + +commit 8bbfd20d0bce00a63d58b6a05702a8afd19548c7 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 18 21:35:27 2013 +0200 + + Update git.mk + + Revision 651d03e8 from https://github.com/behdad/git.mk + + git.mk | 68 +++++++++++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 47 insertions(+), 21 deletions(-) + +commit 16a36728e9a6794e4cd07fe586d5eb208f897e9b +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 18 21:17:02 2013 +0200 + + Fix automake deprecation warnings + + INCLUDE is deprecated since 2001. + Use the equivalent AM_CPPFLAGS variable. + + jpegutils/Makefile.am | 2 +- + plugins/Makefile.am | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit b8b1314f7190863fca8c70f2682fc122b9f89357 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 18 21:13:52 2013 +0200 + + Update gtk-doc Makefile template + + Should fix an automake warning about deprecated variables. + Raise required minimum version for XML parameter. It's probably also been + a while since someone tested against gtk-doc 1.9. + + configure.ac | 4 +- + doc/reference/Makefile.am | 47 +++++++++++++++------- + .../{eog-docs.sgml.in => eog-docs.xml.in} | 0 + 3 files changed, 34 insertions(+), 17 deletions(-) + +commit 4a54515f46b1166d168859479dd6718cc30d590e +Author: Marek Černocký <marek@manet.cz> +Date: Sun Oct 13 15:18:31 2013 +0200 + + Some fixes + + help/cs/cs.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit f54afe33a4082dc5db2afe9d09c4347f10351f36 +Author: tuhaihe <wangdianjin@linuxdeepin.com> +Date: Sun Oct 13 18:15:55 2013 +0800 + + update Simplified Chinese (zh_CN) translation + + po/zh_CN.po | 329 +++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 190 insertions(+), 139 deletions(-) + +commit 9fb6384f7cb264b4a0f2c6cec8969d9700c6f588 +Author: Arash Mousavi <mousavi.arash@gmail.com> +Date: Tue Oct 8 19:22:34 2013 +0330 + + L10N: Updated Persian translations + + po/fa.po | 580 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 274 insertions(+), 306 deletions(-) + +commit 296c14628e2dcb7d127464f6c8c52a6af2eb6fa9 +Author: Carles Ferrando <carles.ferrando@gmail.com> +Date: Sun Oct 6 22:15:34 2013 +0200 + + [l10n] Updated Catalan (Valencian) translation + + po/ca@valencia.po | 1701 +++++++++-------------------------------------------- + 1 file changed, 293 insertions(+), 1408 deletions(-) + +commit 4d47ec5d9307cf33f1826884666b14cb1b8ce71e +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Oct 6 15:36:08 2013 +0200 + + Remove unneeded xmp_terminate call + + This is called by EogApplication if needed. + + src/main.c | 7 ------- + 1 file changed, 7 deletions(-) + +commit 997742b4f0d9023d402f5e7a519aca12fba2be46 +Author: John Hiesey <jhiesey@gmail.com> +Date: Sat Sep 7 01:02:51 2013 +0000 + + Delay display initialization to avoid losing event timestamp + + Should fix a new window not receiving focus when opening another + image from Nautilus. + + https://bugzilla.gnome.org/show_bug.cgi?id=582931 + + src/eog-application.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++++- + src/main.c | 54 +------------------------------------------- + 2 files changed, 62 insertions(+), 54 deletions(-) + +commit e11fc4056c14d017f19bdb306b29c149b891ed78 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Oct 3 13:26:26 2013 +0200 + + EogSidebar: Fix deprecated GtkStock usage + + src/eog-sidebar.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 1222978be073377f6a0b32559868a9d3a47770e9 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:23:58 2013 +0200 + + EogApplication: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-application.c | 10 ++-------- + 1 file changed, 2 insertions(+), 8 deletions(-) + +commit e0f99fbc2782126f6ff4b715b3c51de662b0d0a2 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:23:44 2013 +0200 + + EogClipboardHandler: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-clipboard-handler.c | 9 ++------- + 1 file changed, 2 insertions(+), 7 deletions(-) + +commit a545274a51a55ac75160090c929f3f7c85f0ba8e +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:23:22 2013 +0200 + + EogCloseConfirmationDialog: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-close-confirmation-dialog.c | 10 ++-------- + 1 file changed, 2 insertions(+), 8 deletions(-) + +commit 007273d7a945fba9bbf599019499bd38ecf263ff +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:23:09 2013 +0200 + + EogDialog: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-dialog.c | 11 +++-------- + 1 file changed, 3 insertions(+), 8 deletions(-) + +commit 77be951cb3d61fa2c051de14ea3501d2c07cf7e6 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:22:46 2013 +0200 + + EogExifDetails: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-exif-details.c | 11 +++-------- + 1 file changed, 3 insertions(+), 8 deletions(-) + +commit c485fb8b57231ae6ce9f8e318d05dcef5b49e3d6 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:22:15 2013 +0200 + + EogFileChooser: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-file-chooser.c | 10 ++-------- + 1 file changed, 2 insertions(+), 8 deletions(-) + +commit 756dc07673b0d72b24f980ac074958b374686112 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:21:51 2013 +0200 + + EogImage: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-image.c | 9 ++------- + 1 file changed, 2 insertions(+), 7 deletions(-) + +commit d7317d25330e7e988bb463be9f95fe7e56e5133f +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:21:20 2013 +0200 + + EogListStore: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-list-store.c | 11 +++-------- + 1 file changed, 3 insertions(+), 8 deletions(-) + +commit 80cf4229a3b5d4ca2b74f7f01f128bc61e42d38e +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:20:58 2013 +0200 + + EogMetadataReader: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + Use G_ADD_PRIVATE for this due to G_DEFINE_TYPE_WITH_CODE + + src/eog-metadata-reader-jpg.c | 12 ++++-------- + src/eog-metadata-reader-png.c | 12 ++++-------- + 2 files changed, 8 insertions(+), 16 deletions(-) + +commit 7725a558253cc74af55d7215304401ad2a34fb08 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:19:51 2013 +0200 + + EogMetadataSidebar: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-metadata-sidebar.c | 9 ++------- + 1 file changed, 2 insertions(+), 7 deletions(-) + +commit 119a768de747c60cb3464d5f2e3d94b1825a1025 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:19:20 2013 +0200 + + EogPluginEngine: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-plugin-engine.c | 10 +++------- + 1 file changed, 3 insertions(+), 7 deletions(-) + +commit afa0dc8683c5129b5a761af6c0aaff404498afd2 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:19:05 2013 +0200 + + EogPreferencesDialog: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-preferences-dialog.c | 11 +++-------- + 1 file changed, 3 insertions(+), 8 deletions(-) + +commit ad8c96331f1628d006e621ceb8fdcddb5204cded +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 14:18:15 2013 +0200 + + EogPrintImageSetup: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-print-image-setup.c | 10 ++-------- + 1 file changed, 2 insertions(+), 8 deletions(-) + +commit ffc41379a0a3581672e40ae7da418188f99adce8 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 13:50:18 2013 +0200 + + EogPrintPreview: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-print-preview.c | 11 +++-------- + 1 file changed, 3 insertions(+), 8 deletions(-) + +commit 3945bb1933e3a1c395ccc55ecec2422e8df01f62 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 13:49:39 2013 +0200 + + EogPropertiesDialog: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-properties-dialog.c | 11 +++-------- + 1 file changed, 3 insertions(+), 8 deletions(-) + +commit 8e31683d6ece1883e2004d6921ebc056e5683905 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 13:49:16 2013 +0200 + + EogStatusbar: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-statusbar.c | 13 ++++--------- + 1 file changed, 4 insertions(+), 9 deletions(-) + +commit dba0bd4c7bae69ae7911cd34425ee0ee89223767 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 13:48:48 2013 +0200 + + EogThumbNav: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-thumb-nav.c | 15 +++++---------- + 1 file changed, 5 insertions(+), 10 deletions(-) + +commit 5cdb1b84a729cacefab58bfa0687b4abc96ad3a5 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 13:48:11 2013 +0200 + + EogURIConverter: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-uri-converter.c | 11 +++-------- + 1 file changed, 3 insertions(+), 8 deletions(-) + +commit f0c977d535e8a43fe2733315e5815414594928ee +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Oct 3 16:21:13 2013 +0200 + + EogScrollView: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-scroll-view.c | 9 ++------- + 1 file changed, 2 insertions(+), 7 deletions(-) + +commit 2b2563219c805ed067b8836503d67c5c3ef44fb9 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Oct 3 14:42:43 2013 +0200 + + EogSidebar: Use G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-sidebar.c | 9 ++------- + 1 file changed, 2 insertions(+), 7 deletions(-) + +commit 3fe0bd486b94600bf4c08fa1e6fb13567200e347 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 12:02:32 2013 +0200 + + EogThumbView: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + Use G_ADD_PRIVATE directly in this case. + + src/eog-thumb-view.c | 14 +++++--------- + 1 file changed, 5 insertions(+), 9 deletions(-) + +commit 842775b28e5fd0b7f5fd78c4bff8bac44411cd49 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 12:02:57 2013 +0200 + + EogTransform: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-transform.c | 9 +++------ + 1 file changed, 3 insertions(+), 6 deletions(-) + +commit 35c38646d6af5552f2f24afa6755d0310c8ec1fc +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 4 12:07:29 2013 +0200 + + EogWindow: Convert to G_DEFINE_TYPE_WITH_PRIVATE + + src/eog-window.c | 11 +++-------- + 1 file changed, 3 insertions(+), 8 deletions(-) + +commit cec40f8cdaed5e1b5c6966dbc13915ea80c81db3 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Oct 3 14:45:08 2013 +0200 + + Raise glib dependency to 2.38 + + Needed for G_DEFINE_TYPE_WITH_PRIVATE + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 740a9680cef8daaafd312064cbc6883f31f16ab8 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Sep 25 18:14:04 2013 +0200 + + appmenu: Open help docs at the index page + + src/eog-application.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8f37e662316ad69ea66c8a7d6a06290ff75d768e +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Wed Oct 2 23:04:24 2013 +0300 + + Updated Latvian translation + + help/lv/lv.po | 4889 ++++++++++++++++++++++++++++++++++----------------------- + po/lv.po | 23 +- + 2 files changed, 2928 insertions(+), 1984 deletions(-) + +commit cf5c68302f251c802a018029cc1b4ab19fc5d02e +Author: Cheng-Chia Tseng <pswo10680@gmail.com> +Date: Mon Sep 30 19:21:29 2013 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 257 ++++++++++++++++++++++++++++++------------------------------ + po/zh_TW.po | 257 ++++++++++++++++++++++++++++++------------------------------ + 2 files changed, 258 insertions(+), 256 deletions(-) + +commit ee0a7405332ca664fd11a73e48bdd6fb864dad12 +Author: Muhammet Kara <muhammetk@gmail.com> +Date: Wed Sep 25 21:10:44 2013 +0300 + + [l10n]Updated Turkish translation + + po/tr.po | 371 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 212 insertions(+), 159 deletions(-) + +commit 666e5c7cdf25c1c06d7581d77fbf7e65cac472d6 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Sep 24 14:03:01 2013 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 76e7c714781eae064faeab5ac708b133a6bf1422 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Sep 24 13:57:19 2013 +0200 + + Prepare for release 3.10.0 + + NEWS | 25 +++++++++++++++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 27 insertions(+), 2 deletions(-) + +commit ef766cdb9db26f6d5d73e58f2332c4a21e72d1a7 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Sep 24 13:12:35 2013 +0200 + + EogWindow: Add translator comment about screensaver inhibition + + https://bugzilla.gnome.org/show_bug.cgi?id=708554 + + src/eog-window.c | 1 + + 1 file changed, 1 insertion(+) + +commit 398e250882b61ed7d93232aac277b7e4753062bd +Author: Pavol Klačanský <pavol@klacansky.com> +Date: Sun Sep 22 23:15:00 2013 +0200 + + Updated slovak translation + + po/sk.po | 292 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 151 insertions(+), 141 deletions(-) + +commit 8aeb8b33b277b832ac3be1166247a984fa1110bd +Author: António Lima <amrlima@gmail.com> +Date: Sun Sep 22 21:57:45 2013 +0100 + + Updated Portuguese translation + + po/pt.po | 343 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 196 insertions(+), 147 deletions(-) + +commit 3a673ababf7b50f7132faf8b6713147633def2e4 +Author: Reinout van Schouwen <reinouts@gnome.org> +Date: Sun Sep 22 00:33:39 2013 +0200 + + Updated Dutch translation + + po/nl.po | 364 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 212 insertions(+), 152 deletions(-) + +commit 5d615a79d1c333950e270c6fc12ae1aecad7ca53 +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Sat Sep 21 13:44:13 2013 +0300 + + Updated Ukrainian + + po/uk.po | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit e39f2051275454ffd91eacd758a15401f57c8e00 +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Sat Sep 21 13:39:27 2013 +0300 + + Updated Ukrainian + + po/uk.po | 324 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 186 insertions(+), 138 deletions(-) + +commit 9a2c7ceba81b26ba2e9d59d6c3c5754607f00ea7 +Author: GunChleoc <fios@foramnagaidhlig.net> +Date: Fri Sep 20 12:07:50 2013 -0600 + + Added Scottish Gaelic translation + + po/LINGUAS | 1 + + po/gd.po | 1602 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1603 insertions(+) + +commit 3ec3163105e8cc42a210aa011d6638d655b63839 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Thu Sep 19 08:20:54 2013 +0900 + + l10n: Update Japanese translation + + po/ja.po | 37 +++++++++++++++++++++++-------------- + 1 file changed, 23 insertions(+), 14 deletions(-) + +commit 95c90e49b5d04b390fdcead4b06c626a1b6d620c +Author: Enrico Nicoletto <liverig@gmail.com> +Date: Wed Sep 18 19:54:52 2013 -0300 + + Updated Brazilian Portuguese translation + + help/pt_BR/pt_BR.po | 4084 +++++++++++++++++++++++++++++++++------------------ + 1 file changed, 2616 insertions(+), 1468 deletions(-) + +commit da15977d87de7770460cf796eeafb49d736f4798 +Author: A S Alam <apreet.alam@gmail.com> +Date: Tue Sep 17 19:57:48 2013 -0500 + + Punjabi Translation updated by Aman + + po/pa.po | 358 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 213 insertions(+), 145 deletions(-) + +commit 7d1980b2fc0c39b73e11894904ad8f92e2787141 +Author: Kenneth Nielsen <k.nielsen81@gmail.com> +Date: Mon Sep 16 23:10:15 2013 +0200 + + Updated Danish translation + + po/da.po | 325 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 189 insertions(+), 136 deletions(-) + +commit dea0776ba93138cfcedb8a28994dc8f32a53db74 +Author: Josep Sànchez <papapep@gmx.com> +Date: Mon Sep 16 22:54:15 2013 +0200 + + [l10n] Update Catalan translation + + po/ca.po | 1497 ++++++++------------------------------------------------------ + 1 file changed, 190 insertions(+), 1307 deletions(-) + +commit b17bdb3c9cdab0a92554b8bb9de05af1e4360cf8 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Mon Sep 16 21:23:08 2013 +0200 + + Updated Basque language + + po/eu.po | 329 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 192 insertions(+), 137 deletions(-) + +commit 06099c28cc02cd3cc33c9c05fe77fc1225dfe28c +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Mon Sep 16 18:43:24 2013 +0200 + + Update Arabic translation + + po/ar.po | 21 +++++++++++++++------ + 1 file changed, 15 insertions(+), 6 deletions(-) + +commit 2100ce58eda46106e404124f25d2e73a557f8d10 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 13 22:18:26 2013 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ff081537f6d5ed6e54c06f86d8cc5ea03ae368a0 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 13 22:15:47 2013 +0200 + + Prepare for release 3.9.92 + + NEWS | 30 ++++++++++++++++++++++++++++++ + 1 file changed, 30 insertions(+) + +commit 7de32a6c90aa802590d8d2f1c63aecea0e4d1b34 +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sat Sep 14 05:06:28 2013 +0900 + + Updated Korean translation + + po/ko.po | 338 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 194 insertions(+), 144 deletions(-) + +commit e14d2faba343bf1efd455bb96be6c8e731f93d82 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Thu Sep 12 08:30:36 2013 +0200 + + [l10n] Updated Italian translation. + + po/it.po | 340 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 195 insertions(+), 145 deletions(-) + +commit 95a54de83691e97e8a80cac554e34540775b78e4 +Author: Mattias Põldaru <mahfiaz@gmail.com> +Date: Thu Sep 12 07:54:58 2013 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++------------- + 1 file changed, 60 insertions(+), 15 deletions(-) + +commit 8a88950a3ee96842b61d0ce0557ea148ac428832 +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Wed Sep 11 22:57:44 2013 +0300 + + Updated Latvian translation + + po/lv.po | 356 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 215 insertions(+), 141 deletions(-) + +commit c9ad55243211e5e9335a16102560f4561e9740e1 +Author: Nilamdyuti Goswami <ngoswami@redhat.com> +Date: Wed Sep 11 01:22:33 2013 +0530 + + Assamese Translation Updated + + po/as.po | 358 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 213 insertions(+), 145 deletions(-) + +commit 86a015579e3e5c5d73b3550eeb9a6c8c0ac3fa8d +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Mon Sep 9 20:40:39 2013 +0700 + + Updated Thai translation. + + po/th.po | 20 +++++++++++++------- + 1 file changed, 13 insertions(+), 7 deletions(-) + +commit 7aa0bb9f433bd0370f747ebafbf051d0462b9046 +Author: Benjamin Steinwender <b@stbe.at> +Date: Mon Sep 9 06:32:01 2013 +0200 + + Updated German translation + + po/de.po | 37 +++++++++++++++++++++++-------------- + 1 file changed, 23 insertions(+), 14 deletions(-) + +commit 8a10cd5c34d96bc5582db7b72539f32e155b1ae0 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sun Sep 8 11:25:33 2013 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 35 ++++++++++++++++++++++------------- + 1 file changed, 22 insertions(+), 13 deletions(-) + +commit 03c32b4e07bdaf33a2410f087dfe7ab7df0e8d73 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Sun Sep 8 11:19:30 2013 +0300 + + Updated Belarusian translation. + + po/be.po | 343 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 199 insertions(+), 144 deletions(-) + +commit ed179bd23de3822b1fa98d75e5b4d5f9190ba6aa +Author: Dmitriy S. Seregin <dseregin@59.ru> +Date: Sat Sep 7 13:30:59 2013 +0400 + + Updated Russian translation + + po/ru.po | 611 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 293 insertions(+), 318 deletions(-) + +commit 4a9c0583f33a7618ca7e76acf146f71d142deb27 +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Sat Sep 7 06:05:46 2013 +0200 + + Updated Serbian translation + + po/sr.po | 364 ++++++++++++++++++++++++++++++++++----------------------- + po/sr@latin.po | 364 ++++++++++++++++++++++++++++++++++----------------------- + 2 files changed, 438 insertions(+), 290 deletions(-) + +commit c4b829599346f683f2d8c875e24e9524addcd449 +Author: Marek Černocký <marek@manet.cz> +Date: Thu Sep 5 12:05:17 2013 +0200 + + Updated Czech translation + + po/cs.po | 51 +++++++++++++++++++++++++++++++-------------------- + 1 file changed, 31 insertions(+), 20 deletions(-) + +commit 392586f7d09ef6ad5c05da087b1f09673cf07bc6 +Author: Marek Černocký <marek@manet.cz> +Date: Wed Sep 4 18:23:07 2013 +0200 + + Updated Czech translation + + po/cs.po | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit c52c61df4025cc3dc61923561114492d4e217c9c +Author: Marek Černocký <marek@manet.cz> +Date: Wed Sep 4 18:23:01 2013 +0200 + + Updated Czech translation + + help/cs/cs.po | 4032 ++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 2547 insertions(+), 1485 deletions(-) + +commit 03612ce9e4ba9f75174f84f1e7e1fbbeb815c9a4 +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Wed Sep 4 16:51:32 2013 +0600 + + Update Kazakh translation + + po/kk.po | 1638 ++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 956 insertions(+), 682 deletions(-) + +commit 202fb35ca02c14ed8b53d9e16c0e6d0a46a4f44e +Author: Timo Jyrinki <timo@debian.org> +Date: Wed Sep 4 10:58:13 2013 +0300 + + Finnish translation update + + po/fi.po | 353 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 212 insertions(+), 141 deletions(-) + +commit 41ae39275962e97117ee5dbfe200478cbef2c4fa +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Wed Sep 4 14:49:32 2013 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 22 ++++++++++++++++------ + po/zh_TW.po | 22 ++++++++++++++++------ + 2 files changed, 32 insertions(+), 12 deletions(-) + +commit 3434cae0ad8c6a74c492b58ca2539e84325f2ac2 +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Tue Sep 3 20:34:10 2013 +0200 + + Update French translation + + po/fr.po | 17 +++++++++++++---- + 1 file changed, 13 insertions(+), 4 deletions(-) + +commit 87f29948df58f38bfb612108612b1c9fc934dc72 +Author: Balázs Úr <urbalazs@src.gnome.org> +Date: Tue Sep 3 19:26:14 2013 +0200 + + Updated Hungarian translation + + po/hu.po | 26 +++++++++++++++++++------- + 1 file changed, 19 insertions(+), 7 deletions(-) + +commit 985e801613441253e3fafb1f1bcdfbcdb5a40120 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Tue Sep 3 12:08:36 2013 +0300 + + Updated Hebrew translation. + + po/he.po | 19 ++++++++++++++----- + 1 file changed, 14 insertions(+), 5 deletions(-) + +commit 7e6dff88ce7d562319bc3d779325e1bc3b032fd8 +Author: Rafael Ferreira <rafael.f.f1@gmail.com> +Date: Mon Sep 2 20:55:38 2013 -0300 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 17 +++++++++++++---- + 1 file changed, 13 insertions(+), 4 deletions(-) + +commit a0a9884d9dc101f04cc413c866ad2f2996f39ac9 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 2 23:15:25 2013 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 93c5f1dd58b5a2d2f55cc6a382e9df6e6baa8347 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 2 23:13:00 2013 +0200 + + Prepare for release 3.9.91 + + NEWS | 29 +++++++++++++++++++++++++++++ + 1 file changed, 29 insertions(+) + +commit 080badc96a7c3102498d90a68705beff416ef452 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Sep 2 18:05:01 2013 +0200 + + Updated Spanish translation + + po/es.po | 38 ++++++++++++++++++++++++-------------- + 1 file changed, 24 insertions(+), 14 deletions(-) + +commit c40ca7fd06b59ab739a9064101fc21676628b805 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Mon Sep 2 15:24:52 2013 +0500 + + Tajik translation updated + + po/tg.po | 42 ++++++++++++++++++++++++++---------------- + 1 file changed, 26 insertions(+), 16 deletions(-) + +commit 2fee07222835a9d3d99e787d4b9aa40b5fcdda9e +Author: Andika Triwidada <andika@gmail.com> +Date: Mon Sep 2 15:38:04 2013 +0700 + + Updated Indonesian translation + + po/id.po | 21 +++++++++++++++------ + 1 file changed, 15 insertions(+), 6 deletions(-) + +commit 69f452c2ccb03640860253307d2a7af4b6c69244 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sun Sep 1 20:27:40 2013 +0200 + + Updated Slovenian translation + + po/sl.po | 19 ++++++++++++++----- + 1 file changed, 14 insertions(+), 5 deletions(-) + +commit 8e378527dc3f1c927cdafb8113c37aedb7b8c4b7 +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Sun Sep 1 21:22:59 2013 +0300 + + Updated Lithuanian translation + + po/lt.po | 36 ++++++++++++++++-------------------- + 1 file changed, 16 insertions(+), 20 deletions(-) + +commit 7a51479db40f7589f7275e8cf7476d4ef3d134dd +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sun Sep 1 20:21:19 2013 +0200 + + Updated Polish translation + + po/pl.po | 17 +++++++++++++---- + 1 file changed, 13 insertions(+), 4 deletions(-) + +commit 09d12c1dbbe3127f13677d326d1bc7ec4a40e084 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sun Sep 1 18:42:35 2013 +0200 + + Updated Galician translations + + po/gl.po | 17 +++++++++++++---- + 1 file changed, 13 insertions(+), 4 deletions(-) + +commit f0a2faf9bc64f2ddacd77df11c058cbbc4dc0188 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Sep 1 14:23:45 2013 +0200 + + Fix deprecated GTK_STOCK_DIALOG_* usage + + src/eog-close-confirmation-dialog.c | 4 ++-- + src/eog-error-message-area.c | 6 +++--- + src/eog-window.c | 6 +++--- + 3 files changed, 8 insertions(+), 8 deletions(-) + +commit ddb5fcaff9ef5145bae345f8de18cbefc1ee6d08 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Sep 1 14:22:29 2013 +0200 + + reload: Fix deprecated GtkStock usage + + plugins/reload/eog-reload-plugin.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit bbc89a61fc526c3e69ddfaceea4b4fae3a1f507b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Sep 1 12:35:33 2013 +0200 + + Remove GtkStock usage in delete/trash confirmation dialogs + + GtkStock is deprecated and it is easier to avoid conflicting mnemonics. + + src/eog-window.c | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +commit 0ffced37f62338300b5ede4ed0a678fadb5d0294 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Sun Sep 1 18:27:48 2013 +0900 + + Change mnemonic to avoid confliction + + https://bugzilla.gnome.org/show_bug.cgi?id=707212 + + src/eog-window.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit d8b082d3593ddfbe97423ba3a3966c8485d618d7 +Author: Seán de Búrca <leftmostcat@gmail.com> +Date: Fri Aug 30 22:15:59 2013 -0600 + + Updated Irish translation + + po/ga.po | 1601 ++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 929 insertions(+), 672 deletions(-) + +commit e48d096daef6657a46f00e83d65dc4eaac5da5e5 +Author: Seán de Búrca <leftmostcat@gmail.com> +Date: Thu Aug 29 19:20:45 2013 -0600 + + Remove extraneous gtkdocize in autogen causing build to fail + + https://bugzilla.gnome.org/show_bug.cgi?id=707099 + + autogen.sh | 5 ----- + 1 file changed, 5 deletions(-) + +commit 45d5bd2f0efe2b9dc11c65b256aa38bafae9037a +Author: Andika Triwidada <andika@gmail.com> +Date: Fri Aug 30 14:48:37 2013 +0700 + + Updated Indonesian translation + + po/id.po | 331 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 186 insertions(+), 145 deletions(-) + +commit f4a4d329c3ca4c68e37ce9f4ff48a9a7832ce241 +Author: Ryan Lortie <desrt@desrt.ca> +Date: Thu Aug 29 14:55:45 2013 +0200 + + Update Esperanto translation + + Reviewed by Tiffany Antopolski + + po/eo.po | 498 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 281 insertions(+), 217 deletions(-) + +commit 08aca771ca65468826dd948f3d59a8a56e015d77 +Author: Seán de Búrca <leftmostcat@gmail.com> +Date: Mon Aug 26 15:25:11 2013 -0600 + + Fix autogen and configure + + https://bugzilla.gnome.org/show_bug.cgi?id=706837 + + Makefile.am | 2 ++ + configure.ac | 2 ++ + 2 files changed, 4 insertions(+) + +commit 0513bb5ded56f3a0ccbd551323ce1e599cfc104d +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Thu Aug 22 15:21:38 2013 +0200 + + Update French translation + + po/fr.po | 312 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 178 insertions(+), 134 deletions(-) + +commit c68b57123950957c1e8e7f9ab5c001c28446b7f7 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Thu Aug 22 01:56:27 2013 +0200 + + Updated Polish translation + + po/pl.po | 339 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 193 insertions(+), 146 deletions(-) + +commit cc1d5f8aa36b34c63f45bed0f57935df81c99bb4 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Thu Aug 22 00:51:10 2013 +0200 + + Update and relicence Hungarian help translation + + help/hu/hu.po | 333 +++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 179 insertions(+), 154 deletions(-) + +commit b001b1898572c8192148542ac2ba9e97b3ef5641 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Aug 21 23:21:19 2013 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 501234681af0917633609c80d1fa45c8ad66a5e4 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Aug 21 23:18:08 2013 +0200 + + Prepare for release 3.9.90 + + NEWS | 20 ++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 21 insertions(+), 1 deletion(-) + +commit c068094d7a10fe113a6386960515959eda42e6bd +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sat Aug 17 16:58:46 2013 +0200 + + Updated Slovenian translation + + po/sl.po | 264 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 132 insertions(+), 132 deletions(-) + +commit cea40c87856f5453a7bf506c364088c96c56b07a +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Tue Aug 13 20:30:32 2013 +0700 + + Updated Thai translation. + + po/th.po | 332 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 185 insertions(+), 147 deletions(-) + +commit 30092cb2a523644403053857ae0f8a7f44d38d35 +Author: Marek Černocký <marek@manet.cz> +Date: Tue Aug 13 11:28:51 2013 +0200 + + Updated Czech translation + + po/cs.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b4cce07b4f9dd2ca5234f81d8254465252985983 +Author: Marek Černocký <marek@manet.cz> +Date: Tue Aug 13 08:41:23 2013 +0200 + + Updated Czech translation + + po/cs.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit 0390f995cc8ba7631027d81c799177c0daa2e57e +Author: Marek Černocký <marek@manet.cz> +Date: Mon Aug 12 21:40:42 2013 +0200 + + Updated Czech translation + + po/cs.po | 62 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 31 insertions(+), 31 deletions(-) + +commit 357a87679a8986902bf6b16984a92160ae05ad0d +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Sun Aug 11 13:36:07 2013 +0200 + + Update Arabic translations + + po/ar.po | 246 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 123 insertions(+), 123 deletions(-) + +commit 162a5c7213a8057ed52c81454a91682a08596330 +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Thu Aug 8 22:52:09 2013 +0300 + + Updated Lithuanian translation + + po/lt.po | 612 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 374 insertions(+), 238 deletions(-) + +commit e7d24f7622499e598fcea0bd6024d1f02af226c6 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Aug 8 20:52:14 2013 +0200 + + Replace deprecated widgets in properties dialog + + data/eog-image-properties-dialog.ui | 46 ++++++++++++++++++++++--------------- + 1 file changed, 28 insertions(+), 18 deletions(-) + +commit 6e64b3cb3508a304cba407b4c23ee11c6a3f41ee +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Aug 8 20:52:02 2013 +0200 + + Replace deprecated widgets in preferences dialog + + data/eog-preferences-dialog.ui | 37 ++++++++++++++++++++++++------------- + 1 file changed, 24 insertions(+), 13 deletions(-) + +commit 5c2cecfacd7892a56053971fe2703aac46018bf6 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Tue Aug 6 09:48:14 2013 +0200 + + Updated Hungarian translation + + po/hu.po | 341 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 191 insertions(+), 150 deletions(-) + +commit 38015de1731ec1da8c6bebfcf0cf1ad5b67befff +Author: Rafael Ferreira <rafael.f.f1@gmail.com> +Date: Mon Aug 5 21:55:36 2013 -0300 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 584 ++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 352 insertions(+), 232 deletions(-) + +commit 69c81cdd975e8c2bc946f68811c810ec83201d61 +Author: Christian Kirbach <christian.kirbach@gmail.com> +Date: Mon Aug 5 22:38:37 2013 +0200 + + Updated German help translation + + help/de/de.po | 22 +++++----------------- + 1 file changed, 5 insertions(+), 17 deletions(-) + +commit 3664d15e972e0bac101ad0330acee2b61e1056a5 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Fri Aug 2 13:03:48 2013 +0200 + + Updated Galician translations + + po/gl.po | 246 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 123 insertions(+), 123 deletions(-) + +commit a5922fe9f269d63595b76a719fc7b3a03d81e916 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Fri Aug 2 10:33:07 2013 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 315 ++++++++++++++++++++++++++++++++++-------------------------- + po/zh_TW.po | 315 ++++++++++++++++++++++++++++++++++-------------------------- + 2 files changed, 360 insertions(+), 270 deletions(-) + +commit d8bdde4c1459b01a337a559c901a6fbcab25556f +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Wed Jul 31 09:23:31 2013 +0300 + + Updated Hebrew translation. + + po/he.po | 499 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 282 insertions(+), 217 deletions(-) + +commit 31ea61034870910ecfd94011473ab24220345fd5 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 29 23:35:52 2013 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 32bc55fc423c1a38f3404e873284617933b69336 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 29 23:33:16 2013 +0200 + + Prepare for release 3.9.5 + + NEWS | 27 +++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 28 insertions(+), 1 deletion(-) + +commit 7b78b4b0732661db553f5f932d5cc8c7da6f7b44 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 28 19:53:40 2013 +0200 + + Remove gi18n.h include from header file + + The translation infrastructure is not used from the headers + and should be used in the .c-files requiring it. + This is is especially true for public headers which require a + different i18n include. + + src/eog-save-as-dialog-helper.c | 1 + + src/eog-uri-converter.c | 1 + + src/eog-uri-converter.h | 1 - + 3 files changed, 2 insertions(+), 1 deletion(-) + +commit 3f6c55deb3643e26c44a4a3a0f9825ff932b2871 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 28 19:32:40 2013 +0200 + + EogImage: Move Exempi include into files actually needing it. + + The main eog-image include file doesn't have any dependency on + the Exempi includes. Move it into files that actually use something + from the package. + + src/eog-image-private.h | 5 +++++ + src/eog-image.c | 4 ++++ + src/eog-image.h | 4 ---- + 3 files changed, 9 insertions(+), 4 deletions(-) + +commit df7a1ffb6553db6f9c94267bca95c178129df5e0 +Author: Christian Kirbach <christian.kirbach@gmail.com> +Date: Wed Jul 24 16:26:56 2013 +0200 + + Updated German translation + + help/de/de.po | 798 +++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 421 insertions(+), 377 deletions(-) + +commit 9066f65e6cd8430080665e55e63e0b780d27ee23 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jul 20 20:16:35 2013 +0200 + + EogURIConverter: Make object functions public + + As we install the header we also need to make the class public. + + https://bugzilla.gnome.org/show_bug.cgi?id=704074 + + src/eog-uri-converter.h | 7 ------- + 1 file changed, 7 deletions(-) + +commit 5f5cdfe0fad98089b0c54be92b386fc54268aae4 +Author: Dominique Leuenberger <dimstar@opensuse.org> +Date: Fri Jul 12 11:16:35 2013 +0200 + + install eog-uri-converter.h + + eog-jobs.h includes this header + https://bugzilla.gnome.org/show_bug.cgi?id=704074 + + src/Makefile.am | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a33950c14d7b8da8e1c6289709022affb910be2a +Author: Sebastian Keller <sebastian-keller@gmx.de> +Date: Wed Jul 17 02:28:14 2013 +0200 + + Fix svg rendering with gtk >= 3.9.2 + + eog was ignoring the matrix set in the cairo context which now in the + new simplified drawing world is supposed to position the widget + + src/eog-scroll-view.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +commit 101d626852c174143277effbdce4c8ddf6b56707 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Fri Jul 19 12:04:17 2013 +0500 + + Tajik translation updated + + po/tg.po | 51 +++++++++++++++++++++++++-------------------------- + 1 file changed, 25 insertions(+), 26 deletions(-) + +commit e2aedd6963851a3f20aeffa1ee7d36fb27b62425 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Thu Jul 18 20:32:36 2013 +0500 + + Tajik translation updated + + po/tg.po | 293 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 172 insertions(+), 121 deletions(-) + +commit ecc87d04104d043fa8f09e0bb0d3b5d3b55e5faf +Author: Benjamin Steinwender <b@stbe.at> +Date: Sun Jul 14 16:39:28 2013 +0200 + + Updated German translation + + po/de.po | 12 +++++------- + 1 file changed, 5 insertions(+), 7 deletions(-) + +commit d85839708d8cdda26d7995dfaec701a78c593655 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Sat Jul 13 21:59:12 2013 +0900 + + l10n: Update Japanese translation + + po/ja.po | 314 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 174 insertions(+), 140 deletions(-) + +commit a21ec8c59d1f7df321f7cf3b8e56af72561a5333 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Jul 8 13:35:57 2013 +0200 + + Updated Spanish translation + + help/es/es.po | 327 +++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 174 insertions(+), 153 deletions(-) + +commit 6bda818df1b0a353fbb5aea153dbf531819cd81c +Author: Tiffany Ann Antopolski <tiffany.antopolski@gmail.com> +Date: Sat Jul 6 07:32:42 2013 -0400 + + help: update screenshots to use dark theme + + bug #683908 + + help/C/figures/eog-toolbar-editor.png | Bin 24562 -> 27416 bytes + help/C/figures/image-view-prefs.png | Bin 30993 -> 33011 bytes + help/C/figures/multiple-convert.png | Bin 24970 -> 30781 bytes + help/C/figures/multiple-rename-count.png | Bin 25142 -> 30254 bytes + help/C/figures/plugin-send-by-mail.png | Bin 56866 -> 62863 bytes + help/C/figures/plugin-tools-flickr.png | Bin 56552 -> 0 bytes + help/C/figures/plugins-all.png | Bin 48189 -> 90830 bytes + help/C/figures/prefs-plugins-date.png | Bin 28551 -> 29982 bytes + help/C/figures/prefs-plugins-fullscreen.png | Bin 28569 -> 30013 bytes + help/C/figures/prefs-plugins.png | Bin 26618 -> 28441 bytes + help/C/figures/slideshow-prefs.png | Bin 20616 -> 22467 bytes + help/C/plugin-postr.page | 57 ---------------------------- + help/C/preferences.page | 7 +--- + help/Makefile.am | 2 - + 14 files changed, 1 insertion(+), 65 deletions(-) + +commit ab54359d48b834f7d85ba8e7b1b4eabebd28dfb3 +Author: Benjamin Steinwender <b@stbe.at> +Date: Wed Jul 3 22:33:56 2013 +0200 + + Updated German help translation + + po/de.po | 340 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 192 insertions(+), 148 deletions(-) + +commit fdf17db368a2fda691edc8d7637c0cb776a4bdf7 +Author: Marek Černocký <marek@manet.cz> +Date: Wed Jun 26 18:57:34 2013 +0200 + + Updated Czech translation + + po/cs.po | 258 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 129 insertions(+), 129 deletions(-) + +commit 0d579632b2002de32fb35e0e6ad6047e36cdacb2 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Thu Jun 20 10:20:11 2013 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 240 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 120 insertions(+), 120 deletions(-) + +commit f69749e80e839ddbaf6b7b0a09f2ff3b2f8a31ac +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Wed Jun 19 14:23:43 2013 +0200 + + Updated Spanish translation + + po/es.po | 276 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 131 insertions(+), 145 deletions(-) + +commit d8131568a9129dd8a322fa9b328fb0a9cb0953d8 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Jun 18 18:52:27 2013 +0200 + + When deleting images make sure there's is actually something to delete + + Fixes crashes when one tries to delete an image that was already + deleted outside of eog. The result is not nice, but it is + analogous to what "Move to Trash" does in that case. + + https://bugzilla.gnome.org/show_bug.cgi?id=702523 + + src/eog-window.c | 9 ++++++--- + 1 file changed, 6 insertions(+), 3 deletions(-) + +commit 9af77569e533e56678122d9248a248e378d42f20 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Tue Jun 18 10:52:46 2013 +0900 + + Add mnemonic to Delete Image menu item + + https://bugzilla.gnome.org/show_bug.cgi?id=702521 + + src/eog-window.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 97404f79bbcdeb5eacc5346025578d68de60c88f +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Tue Jun 18 10:13:49 2013 +0500 + + Tajik translation updated + + po/tg.po | 58 +++++++++++++++++++++++++++++----------------------------- + 1 file changed, 29 insertions(+), 29 deletions(-) + +commit aeb71f90a684375a9d7b9ff43d86bca2ab2f74d6 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 17 23:03:46 2013 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 9e8be47a609875b32299b1fe7591d3c3fc158dbe +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 17 23:01:08 2013 +0200 + + Prepare for release 3.9.1 + + NEWS | 32 ++++++++++++++++++++++++++++++++ + 1 file changed, 32 insertions(+) + +commit 63e09eee28734df858ddbf962c507a9eed7f39c5 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 16 16:03:05 2013 +0200 + + EogImage: Allow calling image_load outside of EogJobs + + This is still needed for the statusbar-date plugin. + EogImage needs to be aware of the load jobs to get this away. + + src/eog-image.c | 18 +++++++++++------- + 1 file changed, 11 insertions(+), 7 deletions(-) + +commit 8fbd964de00924c578eaa47c1a7ef5a6ceb81d8e +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 16 15:48:58 2013 +0200 + + EogJobs: Reinstate EogJobSave and EogJobSaveAs + + These are also missing cancellation for now. + + src/eog-jobs.c | 169 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 167 insertions(+), 2 deletions(-) + +commit 0a26c8bc7b3c884a7b5a6da001fd207021a1b0ea +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 16 15:06:49 2013 +0200 + + EogJobs: Make EogJobCopy work with the new scheduler + + Also uses the old worker code for now until job cancellation + is fully implemented. + + src/eog-jobs.c | 28 +++++++++++++++++++++++++++- + src/eog-window.c | 2 -- + 2 files changed, 27 insertions(+), 3 deletions(-) + +commit 707bf266f5166b9be64ab4f445d6dbe00a3c1ed5 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 16 14:21:00 2013 +0200 + + EogJobs: Make EogJobTransform work again + + This re-uses the old job code and needs to be + extended with proper cancellation checks. + + src/eog-jobs.c | 29 ++++++++++++++++++++++++++++- + 1 file changed, 28 insertions(+), 1 deletion(-) + +commit 420ad68cb6fa9d9dcbbb6034529e1f64a1479fe5 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed May 15 21:55:09 2013 +0200 + + EogJobs: Fix signalling callbacks + + Make sure the callbacks are only called once each time. + + src/eog-jobs.c | 22 ++++++++++++++-------- + 1 file changed, 14 insertions(+), 8 deletions(-) + +commit e5c7e101621e19e908a834ae33480c72365bd361 +Author: Javier Sánchez <jsanchez@deskblue.com> +Date: Fri Feb 15 20:17:28 2013 +0100 + + Refactored eog jobs system. + + src/Makefile.am | 4 +- + src/eog-debug.h | 2 + + src/eog-image.c | 6 +- + src/eog-job-queue.c | 234 ----- + src/eog-job-scheduler.c | 187 ++++ + src/{eog-job-queue.h => eog-job-scheduler.h} | 33 +- + src/eog-jobs.c | 1341 ++++++++++++++++---------- + src/eog-jobs.h | 341 ++++--- + src/eog-list-store.c | 6 +- + src/eog-thumb-view.c | 4 +- + src/eog-window.c | 26 +- + src/main.c | 4 +- + 12 files changed, 1247 insertions(+), 941 deletions(-) + +commit 0ceb75003c32b49d4b75d4689536a51b3e4c8d52 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Sat Jun 8 20:45:23 2013 +0200 + + Update Arabic translation + + po/ar.po | 304 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 180 insertions(+), 124 deletions(-) + +commit 5e50af32f4ecc054ba7888df9aada01a626b6339 +Author: tuhaihe <wangdianjin@linuxdeepin.com> +Date: Thu Jun 6 11:52:50 2013 +0800 + + update Simplified Chinese (zh_CN) translation + + po/zh_CN.po | 298 +++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 152 insertions(+), 146 deletions(-) + +commit 30e54c4b023a866532d5925fc78764e6af6d5f00 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Wed Jun 5 13:53:40 2013 +0500 + + Tajik updated + + po/tg.po | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +commit 6d7cf49308384369fe92e606c8eaf21f8bbeb146 +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Wed Jun 5 08:23:30 2013 +0300 + + Updated Greek translation + + po/el.po | 337 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 197 insertions(+), 140 deletions(-) + +commit 8e48620bd4ae6e6465bbee31f0f33920bfcdea40 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Tue Jun 4 17:22:21 2013 +0500 + + Tajik updated + + po/tg.po | 330 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 197 insertions(+), 133 deletions(-) + +commit e5e922b69bb103de66754cacdb98cdd064f3e9ac +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Tue Jun 4 12:28:30 2013 +0500 + + Tajik updated + + po/tg.po | 26 +++++++++++++------------- + 1 file changed, 13 insertions(+), 13 deletions(-) + +commit 6d16c116bc1bbb91ac60f9ecad9f951137031819 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Mon Jun 3 14:22:11 2013 +0500 + + Tajik updated + + po/tg.po | 92 ++++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 49 insertions(+), 43 deletions(-) + +commit b4daae8a72dd5af6247ca2368b3b64811d3a812c +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Sat Jun 1 00:11:53 2013 +0900 + + l10n: Update Japanese translation + + help/ja/ja.po | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 49d063b6d607c0460dccd212e3d28dd5812c9a95 +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Fri May 31 22:35:38 2013 +0900 + + l10n: Update Japanese translation + + po/ja.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 7721f5278c9c4e9f3eeb03092f02698c668bc933 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Fri May 31 15:32:33 2013 +0500 + + Tajik updated + + po/tg.po | 135 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 68 insertions(+), 67 deletions(-) + +commit 2401fe70a3cebfed6211ba4db81eb4f1bde4cd9d +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Fri May 31 14:02:29 2013 +0500 + + Tajik updated + + po/tg.po | 130 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 65 insertions(+), 65 deletions(-) + +commit 570e11f47e8483a51a3b8c9b38ba36f68d349e1c +Author: Marek Černocký <marek@manet.cz> +Date: Wed May 29 12:23:21 2013 +0200 + + Updated Czech translation + + po/cs.po | 317 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 182 insertions(+), 135 deletions(-) + +commit 4d52c0dc9f90be453728b2f6312400c9e098ea93 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Mon May 27 14:15:32 2013 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 385871baf33533660c4aa52e54f9643148be05fb +Author: Richard Stanislavský <kenny.vv@gmail.com> +Date: Fri May 24 23:41:29 2013 +0200 + + Updated slovak translation + + po/sk.po | 315 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 182 insertions(+), 133 deletions(-) + +commit 0fa3c71fa592024448f274198de925bf2f346182 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Fri May 24 12:10:30 2013 +0300 + + Updated Hebrew translation. + + po/he.po | 339 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 193 insertions(+), 146 deletions(-) + +commit 7fb935bf7a1cb12d9cc6d4b191172d2e0cb2b811 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Mon May 20 01:18:16 2013 +0200 + + Updated Galician translations + + po/gl.po | 313 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 179 insertions(+), 134 deletions(-) + +commit 8ce919f108d10f3a5bc30ffb959bf46cc495d6d4 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Thu May 16 13:33:13 2013 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 318 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 181 insertions(+), 137 deletions(-) + +commit 1b618a788067e1157711c8d0b92bffbba8580b71 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed May 15 22:00:49 2013 +0200 + + Update git.mk + + Updated to revision a49ac54ca from https://github.com/behdad/git.mk + + git.mk | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++------------- + 1 file changed, 79 insertions(+), 18 deletions(-) + +commit 823493f93960c6ff4f9cab23454ba8464d4f478a +Author: Felix Riemann <friemann@gnome.org> +Date: Fri May 10 15:14:18 2013 +0200 + + EogMetadataSidebar: Fix deprecation warning with newer GTK+ + + configure.ac | 2 +- + src/eog-metadata-sidebar.c | 3 +-- + 2 files changed, 2 insertions(+), 3 deletions(-) + +commit e08c9d44b0c0cd36674ffd4cac9a473a68018f8e +Author: Felix Riemann <friemann@gnome.org> +Date: Fri May 10 14:42:33 2013 +0200 + + Raise initial window size limit to 85% of screen size + + This makes much better use of the available screen space. + + src/eog-window.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 3624b85895ef4ef2c840e4c84cf2fef0b35625bc +Author: Leonardo Donelli <learts92@gmail.com> +Date: Fri May 10 01:47:37 2013 +0200 + + Set better window size + + Make sure the window is not too big for the screen size. + The previous version did that in a way that didn't work + with some images size, particularly on 16:9 displays. + + https://bugzilla.gnome.org/show_bug.cgi?id=630512 + + src/eog-window.c | 10 ++++------ + 1 file changed, 4 insertions(+), 6 deletions(-) + +commit 988697cfdd6d46fc05afa9b62088833c5a3f6335 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu May 2 19:37:23 2013 +0200 + + Updated Spanish translation + + po/es.po | 340 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 198 insertions(+), 142 deletions(-) + +commit 349e5f9825f75e2c96d48ed84ec70d3ce821b732 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu May 2 19:37:13 2013 +0200 + + Updated Spanish translation + + help/es/es.po | 23 +++++++++++------------ + 1 file changed, 11 insertions(+), 12 deletions(-) + +commit 6710c165498e8395a535727bddfefffbd36f33f0 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Wed May 1 20:31:44 2013 +0200 + + Updated Slovenian translation + + po/sl.po | 572 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 344 insertions(+), 228 deletions(-) + +commit f34e2585350a5607ced88d8826876a2c9a9e9120 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed May 1 19:47:53 2013 +0200 + + Adjust version to be a development version + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 6ffb1424cb5e11f1403a7cd62d81cd52d4bf550b +Author: Felix Riemann <friemann@gnome.org> +Date: Wed May 1 19:43:43 2013 +0200 + + Add UI elements for deleting images + + https://bugzilla.gnome.org/show_bug.cgi?id=563538 + + data/eog-toolbar.xml | 1 + + data/eog-ui.xml | 1 + + src/eog-window.c | 33 ++++++++++++++++++--------------- + 3 files changed, 20 insertions(+), 15 deletions(-) + +commit c9111f690078bd7450a260f14a2abc4a9b2f9e45 +Author: Javier Sánchez <jsanchez@deskblue.com> +Date: Fri Mar 15 19:54:46 2013 +0100 + + Ability to permanently delete photo via keyboard shortcut (Shift-Del) + + Activated shortcut to remove one or more images permanently. Previous + to delete the user is asked to confirm the action. + + https://bugzilla.gnome.org/show_bug.cgi?id=563538 + + src/eog-window.c | 246 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 246 insertions(+) + +commit 23fae7e91d25d7b19fb2db1cee3ebe6e6348e5ad +Author: Felix Riemann <friemann@gnome.org> +Date: Wed May 1 18:30:35 2013 +0200 + + Remove unnecessary hyphens + + https://bugzilla.gnome.org/show_bug.cgi?id=699043 + + data/eog-preferences-dialog.ui | 25 +++++++++---------------- + help/C/preferences.page | 2 +- + 2 files changed, 10 insertions(+), 17 deletions(-) + +commit f91fad012d987c7060d02c654d14db56c3c02cd1 +Author: OKANO Takayoshi <kano@na.rim.or.jp> +Date: Sat Apr 27 20:51:47 2013 +0900 + + l10n: Update Japanese translation + + Fix typo + + help/ja/ja.po | 485 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 480 insertions(+), 5 deletions(-) + +commit 8cfda52f45ac4ab1827f98243e3114bae72a647f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 15 22:44:15 2013 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 62bd7253870a6d0cb12b696189356d821846317c +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 15 22:41:18 2013 +0200 + + Prepare for release 3.8.1 + + NEWS | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +commit ed5665f6e6555afa83dc4a384fff0678cf138653 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Sun Apr 14 10:18:18 2013 +0200 + + Fix tags in the Hungarian help + + help/hu/hu.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 15979aa1b02a4e01f54c85ab87fc0b5fc9e164b6 +Author: Muhammet Kara <muhammetk@acikkaynak.name.tr> +Date: Thu Apr 11 00:33:40 2013 +0300 + + [l10n] Updated Turkish translation + + po/tr.po | 283 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 144 insertions(+), 139 deletions(-) + +commit acad6358e4b3adc06f598f3e6d2400ef6b65002a +Author: Bruce Cowan <bruce@bcowan.me.uk> +Date: Sat Apr 6 17:40:11 2013 +0100 + + Updated British English translation + + po/en_GB.po | 301 +++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 154 insertions(+), 147 deletions(-) + +commit 6b73ef4ae13d2f7b8f44276d3fc053b753bd28eb +Author: Ville-Pekka Vainio <vpvainio@iki.fi> +Date: Sun Mar 31 20:16:13 2013 +0300 + + Finnish translation update by Jiri Grönroos + + po/fi.po | 244 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 122 insertions(+), 122 deletions(-) + +commit 213c5d09a1bd3604d44265945f72fd9abe755f7d +Author: Ville-Pekka Vainio <vpvainio@iki.fi> +Date: Tue Mar 26 21:17:06 2013 +0200 + + Finnish translation update by Jiri Grönroos + + po/fi.po | 234 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 116 insertions(+), 118 deletions(-) + +commit e9c5562eb3c4fe235036791bc7f7a1b1323a596a +Author: Praveen Illa <mail2ipn@gmail.com> +Date: Tue Mar 26 19:55:06 2013 +0530 + + Updated Telugu Translation + + po/te.po | 281 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 144 insertions(+), 137 deletions(-) + +commit eba44ecfffefb0ed688a6dadcc0e55e2f49c8b0a +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Tue Mar 26 12:29:49 2013 +0200 + + Update uk translation + + po/uk.po | 260 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 134 insertions(+), 126 deletions(-) + +commit abbf91bc7fd0a9489219316c152d7deb04f411b5 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 25 21:07:59 2013 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit fda09f283aeb15c36386a64bd2995fd1c47728e9 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 25 21:04:19 2013 +0100 + + Prepare for release 3.8.0 + + NEWS | 16 ++++++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 18 insertions(+), 2 deletions(-) + +commit 8335c340766aed7b7e6258fcd9c7ff49e39e733a +Author: Rajesh Ranjan <rranjan@redhat.com> +Date: Mon Mar 25 12:07:55 2013 +0530 + + hindi translation + + po/hi.po | 427 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 207 insertions(+), 220 deletions(-) + +commit f93e2d1d81376d2f32756fdad7701fbde1dd1c1a +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Sun Mar 24 18:35:10 2013 +0100 + + Update French translation + + help/fr/fr.po | 15 +++++++-------- + 1 file changed, 7 insertions(+), 8 deletions(-) + +commit 3c7b07bf28102b00c582a9fe8e3560c3d892a6f3 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Thu Mar 21 10:39:58 2013 +0100 + + Updated Hungarian documentation translation + + help/hu/hu.po | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +commit fae18183361da4e7b05117e0add61248122a2ba5 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Thu Mar 21 02:31:24 2013 +0100 + + Updated Hungarian documentation translation + + help/hu/hu.po | 175 ++++++++-------------------------------------------------- + 1 file changed, 24 insertions(+), 151 deletions(-) + +commit bc40bea35bc613a92b16c4429ba142aca71363bc +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Wed Mar 20 20:39:06 2013 +0100 + + [l10n] Updated Italian translation. + + po/it.po | 263 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 136 insertions(+), 127 deletions(-) + +commit b604721214a1d60642a0a947592dd1b4de04fb0a +Author: Arash Mousavi <mousavi.arash@gmail.com> +Date: Wed Mar 20 22:49:23 2013 +0330 + + L10N: Updated Persian Translation + + po/fa.po | 283 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 144 insertions(+), 139 deletions(-) + +commit 5276d32b87edc9fe3997f5d644f77a61e4ef35b4 +Author: Dr.T.Vasudevan <drtvasudevan@gmail.com> +Date: Wed Mar 20 17:03:04 2013 +0530 + + Updated Tamil translation + + po/ta.po | 963 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 510 insertions(+), 453 deletions(-) + +commit f5065a68ee837ae3e3a923cefb7f57c44ba952f0 +Author: Victor Ibragimov <victor.ibragimov@gmail.com> +Date: Tue Mar 19 20:47:11 2013 +0100 + + [l10n] Added Tadjik translation + + po/LINGUAS | 1 + + po/tg.po | 1521 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1522 insertions(+) + +commit 7ef348565130d4f49f56dd590fde4c46656c08da +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 18 22:33:15 2013 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit f5f03b9df6ab9c9b2a6b39b94a96aac67d5d03ca +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 18 22:29:44 2013 +0100 + + Prepare for release 3.7.92 + + NEWS | 25 +++++++++++++++++++++++++ + 1 file changed, 25 insertions(+) + +commit ff9df36196a8763db215dc5b9ebaeae2d361ae96 +Author: Carles Ferrando <carles.ferrando@gmail.com> +Date: Sun Mar 17 19:53:45 2013 +0100 + + [l10n] Updated Catalan (Valencian) translation + + po/ca@valencia.po | 294 ++++++++++++++++++++++++++++-------------------------- + 1 file changed, 150 insertions(+), 144 deletions(-) + +commit a0cd6794c963bdd0faf77bd037229fe91c80c586 +Author: Matthias Clasen <mclasen@redhat.com> +Date: Wed Mar 13 23:20:53 2013 -0400 + + Disable color management support on !X + + The color management support uses X root window properties, and + direct Xlib calls. For now, simply disable this code if we are + not using X11. + + https://bugzilla.gnome.org/show_bug.cgi?id=695818 + + src/eog-window.c | 14 ++++++++------ + 1 file changed, 8 insertions(+), 6 deletions(-) + +commit 0ad719ec832bed446a08b734d4a8d98bd76068ac +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sun Mar 17 01:01:31 2013 +0900 + + Updated Korean translation + + po/ko.po | 349 ++++++++++++++++++++++++--------------------------------------- + 1 file changed, 135 insertions(+), 214 deletions(-) + +commit 64ecbacfea3a013153c392542da1d92bdf03e650 +Author: Balázs Úr <urbalazs@src.gnome.org> +Date: Fri Mar 15 13:23:25 2013 +0100 + + Updated Hungarian translation + + po/hu.po | 277 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 142 insertions(+), 135 deletions(-) + +commit 027fac8642ab6c355da8d52f39c84b8098a89c19 +Author: Duarte Loreto <happyguy_pt@hotmail.com> +Date: Thu Mar 14 23:35:45 2013 +0000 + + Updated Portuguese translation and converted to New Spelling (Novo AO) + + po/pt.po | 408 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 206 insertions(+), 202 deletions(-) + +commit 00fcfc8ee53d52c373a03a38c33863d27a065896 +Author: KennethNielsen <k.nielsen81@gmail.com> +Date: Tue Mar 12 23:34:31 2013 +0100 + + Updated Danish translation + + po/da.po | 260 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 132 insertions(+), 128 deletions(-) + +commit 54374091e6ad3e768f88d671d61ad65049389afd +Author: Gil Forcada <gforcada@gnome.org> +Date: Mon Mar 11 23:08:09 2013 +0100 + + [l10n] Updated Catalan translation + + po/ca.po | 256 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 130 insertions(+), 126 deletions(-) + +commit e2857ec68dcaca2961d474387487bf3f50e094de +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Sun Mar 10 21:52:32 2013 +0900 + + [l10n] Update Japanese translation + + po/ja.po | 275 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 141 insertions(+), 134 deletions(-) + +commit 92852f43a603b6d8fdfe923ba771a30c99b2cb94 +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Sun Mar 10 06:20:56 2013 +0200 + + Updated Greek translation + + help/el/el.po | 24 ++++++++++++++---------- + 1 file changed, 14 insertions(+), 10 deletions(-) + +commit 6072c344721cbb354a59c974cb6d29de01093d11 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Sat Mar 9 18:35:35 2013 +0200 + + Update Arabic translation + + po/ar.po | 276 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 140 insertions(+), 136 deletions(-) + +commit 9ed8c211a9782551a9412588a158aab08510a074 +Author: Ville-Pekka Vainio <vpvainio@iki.fi> +Date: Thu Mar 7 20:44:20 2013 +0200 + + Finnish translation update by Jiri Grönroos + + po/fi.po | 276 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 141 insertions(+), 135 deletions(-) + +commit 7133f826aee58c35148106392850b80772373d31 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Thu Mar 7 16:10:31 2013 +0300 + + Updated Belarusian translation. + + po/be.po | 263 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 134 insertions(+), 129 deletions(-) + +commit 9957625f63a19aff35f28f6d3a2987ea6480a594 +Author: Nilamdyuti Goswami <ngoswami@redhat.com> +Date: Wed Mar 6 13:01:16 2013 +0530 + + Assamese translation updated for gnome 3.8 + + po/as.po | 374 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 205 insertions(+), 169 deletions(-) + +commit 7cb2045e1ab224707eda4ea521f9af0667fad6ca +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Tue Mar 5 22:50:19 2013 +0100 + + [l10n] Updated German translation + + po/de.po | 22 +++++++++++----------- + 1 file changed, 11 insertions(+), 11 deletions(-) + +commit 864ccf2a3b7d550dea47e93100a5248d3eab74dc +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Mar 5 19:00:20 2013 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 72a84ce19f3d2d3e89005b32ba99ee06c90308b4 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Mar 5 18:56:02 2013 +0100 + + Prepare for release 3.7.91 + + NEWS | 19 +++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 20 insertions(+), 1 deletion(-) + +commit 4280ca848981aeaba373b47010ff195af65f1be2 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sat Mar 2 21:59:37 2013 +0700 + + Updated Vietnamese translation + + po/vi.po | 12 ++++-------- + 1 file changed, 4 insertions(+), 8 deletions(-) + +commit 6e37acd15672ffb95d9ecb9d8016971a265540da +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sat Mar 2 21:58:51 2013 +0700 + + po/vi: import from Damned Lies + + po/vi.po | 270 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 140 insertions(+), 130 deletions(-) + +commit 51939dfe3c3ad733cfd9cd2855194c62e6e0522d +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Mar 1 16:52:33 2013 +0200 + + eog.doap: Remove myself + + eog.doap | 7 ------- + src/eog-window.c | 2 +- + 2 files changed, 1 insertion(+), 8 deletions(-) + +commit ef682a45c90a7d953c71f03bbf8e66849abfe439 +Author: A S Alam <aalam@users.sf.net> +Date: Fri Feb 22 14:59:25 2013 +0000 + + Punjabi: Translation updated (aalam) + + po/pa.po | 276 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 141 insertions(+), 135 deletions(-) + +commit 1126065694b3d1938c83bc85e1a9a9e3218c933b +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Wed Feb 20 21:21:38 2013 +0100 + + Update French translation + + po/fr.po | 271 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 139 insertions(+), 132 deletions(-) + +commit d4b6409f8a06c351da841cf9b5261a2a6eac35a2 +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Wed Feb 20 12:24:45 2013 +0200 + + Updated Latvian translation + + po/lv.po | 314 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 158 insertions(+), 156 deletions(-) + +commit febe46b02cbed7e464bf7287dc2d6aeb539962e9 +Author: Aleksej Kabanov <ak099@mail.ru> +Date: Wed Feb 20 09:54:01 2013 +0400 + + Updated Russian translation + + po/ru.po | 282 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 143 insertions(+), 139 deletions(-) + +commit 3040c2f657ae4bc14170c0c7ced664475f039d7e +Author: Marek Černocký <marek@manet.cz> +Date: Sun Feb 17 23:34:00 2013 +0100 + + Updated Czech translation + + po/cs.po | 268 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 136 insertions(+), 132 deletions(-) + +commit 02ae828a3dfb231d19c4bc168d5fb26d22b26d13 +Author: Gheyret Kenji <gheyret@gmail.com> +Date: Sat Feb 16 12:30:57 2013 +0900 + + Updated Uyghur translation + + Signed-off-by: Gheyret Kenji <gheyret@gmail.com> + + po/ug.po | 45 +++++++++++++-------------------------------- + 1 file changed, 13 insertions(+), 32 deletions(-) + +commit adef4664a87e41584963a9926f931a8e6472675e +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Mon Feb 4 06:42:50 2013 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 274 +++++++++++++++++++++++++++++++----------------------------- + po/zh_TW.po | 274 +++++++++++++++++++++++++++++++----------------------------- + 2 files changed, 282 insertions(+), 266 deletions(-) + +commit d75df2b48e48a2e55235d16102a25d1e7f3c0134 +Author: Anish A <aneesh.nl@gmail.com> +Date: Sat Feb 2 21:23:15 2013 +0400 + + Updated Malayalam Localization + + po/ml.po | 5499 +++++++++++++++----------------------------------------------- + 1 file changed, 1325 insertions(+), 4174 deletions(-) + +commit e35cb69fd4a3cdd4202f7bb406d883ac314fdc80 +Author: Anish A <aneesh.nl@gmail.com> +Date: Sat Feb 2 21:15:51 2013 +0400 + + Updated Malayalam Localization + + po/ml.po | 5517 +++++++++++++++++++++++++++++++++++++++++++++++--------------- + 1 file changed, 4187 insertions(+), 1330 deletions(-) + +commit e6f8b4d2a317baa67d9dd8b70bc8f9089264bbb9 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Thu Jan 31 13:19:40 2013 +0100 + + Updated Basque language + + po/eu.po | 1017 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 518 insertions(+), 499 deletions(-) + +commit 31837030c60e850ca6a22b263f1f19f98c875d92 +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Sat Jan 19 12:15:06 2013 +0100 + + Updated Friulian translation + + po/fur.po | 893 +++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 411 insertions(+), 482 deletions(-) + +commit 700dd09935809a8496b67f7369a85296cbea8a54 +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Fri Jan 18 11:19:59 2013 +0100 + + Updated Serbian translation + + po/sr.po | 271 +++++++++++++++++++++++++++++---------------------------- + po/sr@latin.po | 271 +++++++++++++++++++++++++++++---------------------------- + 2 files changed, 280 insertions(+), 262 deletions(-) + +commit 58edc9a4eb7064392b0b5c39ea32245e774eb553 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 14 19:40:07 2013 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ab5c16869f81374ff0e18d9b53e89b78b88ea595 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 14 19:35:32 2013 +0100 + + Prepare for release 3.7.4 + + NEWS | 29 +++++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 30 insertions(+), 1 deletion(-) + +commit b13d8592c0cca05ccb9a6d1038e834fbb97c8b73 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 14 19:32:22 2013 +0100 + + Add XDG_DATA_DIRS to plugin search path + + Also add some debug output to ease debugging possible problems later. + + https://bugzilla.gnome.org/show_bug.cgi?id=690282 + + src/eog-plugin-engine.c | 24 ++++++++++++++++++++++++ + 1 file changed, 24 insertions(+) + +commit 60dac617692b5d55e67aa62f8294887d66c5366a +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Mon Jan 14 20:54:14 2013 +0700 + + Updated Thai translation + + po/th.po | 274 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 139 insertions(+), 135 deletions(-) + +commit dcde16bbffc953c3e8c6942cb04c6fd48c4aee89 +Author: Florian Müllner <fmuellner@gnome.org> +Date: Fri Jan 11 15:39:20 2013 +0100 + + Use <control>q shortcut to quit the application + + Currently <control>q is used as a synonym for <control>w/Escape, + e.g. it closes the active window. Make it quit the application + instead, which is what most other GNOME applications do. + + https://bugzilla.gnome.org/show_bug.cgi?id=691552 + + data/eog-app-menu.xml | 1 + + src/eog-window.c | 2 -- + 2 files changed, 1 insertion(+), 2 deletions(-) + +commit 3145fce6d7544dfb6e159924fb52e2ca13b7a42c +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 13 16:58:49 2013 +0100 + + EogWindow: Hold a reference on the used ThumbView + + The window uses it during runtime so it should keep a reference + to it. Due to the necessary unref this avoids critical warnings + because of EogThumbView's own disposal routine causing an + unwanted signal emission. + + https://bugzilla.gnome.org/show_bug.cgi?id=691517 + + src/eog-window.c | 12 +++++++++++- + 1 file changed, 11 insertions(+), 1 deletion(-) + +commit e974cf58096495d267ca93cda92cc42c86482b16 +Author: Gheyret Kenji <gheyret@gmail.com> +Date: Sun Jan 13 17:13:37 2013 +0900 + + Updated Uyghur translation + + Signed-off-by: Gheyret Kenji <gheyret@gmail.com> + + po/ug.po | 1393 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 706 insertions(+), 687 deletions(-) + +commit 2aa0407ef87f32b65273acf2faa27e791a8de2e6 +Author: Alexander Shopov <ash@kambanaria.org> +Date: Fri Jan 11 08:50:36 2013 +0200 + + Updated Bulgarian translation + + po/bg.po | 254 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 129 insertions(+), 125 deletions(-) + +commit 5c88417da14b2d190ecdf75c51033d6c22ea7064 +Author: Fabio Tomat <f.t.public@gmail.com> +Date: Mon Jan 7 16:19:34 2013 +0100 + + Updated Friulian translation + + po/fur.po | 1935 +++++++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 1235 insertions(+), 700 deletions(-) + +commit df34d7896f9d9288ce5059fb7cd0f7359cebf87c +Author: Enrico Nicoletto <enriconlto@src.gnome.org> +Date: Wed Jan 2 21:04:55 2013 -0200 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 522 ++++++++++++++++++++++++++---------------------------------- + 1 file changed, 227 insertions(+), 295 deletions(-) + +commit 3fcf3d368f664c3da275ee350cbf518d781d979b +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 2 12:42:52 2013 +0100 + + EogScrollView: Check modifiers for all supported keyboard shortcuts + + Especially check that no modifier key is pressed for zooming. + + https://bugzilla.gnome.org/show_bug.cgi?id=690931 + + src/eog-scroll-view.c | 21 +++++++++++++++------ + 1 file changed, 15 insertions(+), 6 deletions(-) + +commit 9b7962a47d7db472d53dee7c8adbac2d0d5e8dcc +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Tue Jan 1 18:35:10 2013 +0200 + + Updated Lithuanian translation + + po/lt.po | 303 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 153 insertions(+), 150 deletions(-) + +commit e19320330bf805e0e0b336363d70499d02b85e82 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Dec 30 18:08:59 2012 +0100 + + reload: Add missing license headers + + Assuming that the plugins are in line with Lucas' other contributions + and thus are licensed as GPLv2+. + + https://bugzilla.gnome.org/show_bug.cgi?id=689165 + + plugins/reload/eog-reload-plugin.c | 21 +++++++++++++++++++++ + plugins/reload/eog-reload-plugin.h | 21 +++++++++++++++++++++ + 2 files changed, 42 insertions(+) + +commit 967c22f5c0b3d1e6b90058666d8cae23d77fb03a +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Dec 30 17:48:02 2012 +0100 + + fullscreen: Add missing license headers + + Assuming that the plugins are in line with Lucas' other contributions + and thus are licensed as GPLv2+. + + https://bugzilla.gnome.org/show_bug.cgi?id=689165 + + plugins/fullscreen/eog-fullscreen-plugin.c | 21 +++++++++++++++++++++ + plugins/fullscreen/eog-fullscreen-plugin.h | 21 +++++++++++++++++++++ + 2 files changed, 42 insertions(+) + +commit 6de1a4cabed6ef2adf86b1cdde1ee9ccf2b9b671 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Dec 30 17:42:21 2012 +0100 + + jpegutils: Add missing license headers + + transupp.h is based on the file shipped by gThumb. + + https://bugzilla.gnome.org/show_bug.cgi?id=689165 + + jpegutils/jpegint.h | 23 +++++++++++++++++++++++ + jpegutils/transupp.h | 19 +++++++++++++++++++ + 2 files changed, 42 insertions(+) + +commit 47b1addca635e35efe7345bf710d9c8b1ad965fc +Author: Florencio Neves <florencioneves@gmail.com> +Date: Wed Dec 26 05:39:24 2012 -0200 + + Updated Brazilian Portuguese Translation + + po/pt_BR.po | 99 +++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 50 insertions(+), 49 deletions(-) + +commit 3df9ea9cbf8c7747dbf93c1e611c51f53246472f +Author: Richard Stanislavský <kenny.vv@gmail.com> +Date: Mon Dec 24 15:47:19 2012 +0100 + + Updated Slovak translation + + po/sk.po | 33 +++++++++++++++------------------ + 1 file changed, 15 insertions(+), 18 deletions(-) + +commit 6da8b4b40e16525e136d8176694259bb50c97c1f +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Sun Dec 23 19:14:36 2012 +0200 + + Updated Greek translation + + po/el.po | 552 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 325 insertions(+), 227 deletions(-) + +commit 3ee8acc593524eec5ca8a6e5e782f7ee44cbd138 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 19 19:55:09 2012 +0100 + + Don't use XDG_CONFIG_DIR for per-user plugins + + Load them from XDG_USER_DATA_DIR instead to be in line with other + applications using plugins like gnome-shell and gedit. + + https://bugzilla.gnome.org/show_bug.cgi?id=690282 + + src/eog-plugin-engine.c | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +commit 3a74ec42ff91ec0e782b0cd6514e3992ea44890a +Author: Mattias Põldaru <mahfiaz@gmail.com> +Date: Wed Dec 19 15:39:29 2012 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 13 ++++++++----- + 1 file changed, 8 insertions(+), 5 deletions(-) + +commit 6faa4b0cf46a9e436a06169d5a2cf98b14654d20 +Author: Richard Stanislavský <kenny.vv@gmail.com> +Date: Wed Dec 12 22:39:08 2012 +0100 + + Updated slovak translation + + po/sk.po | 1662 ++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 964 insertions(+), 698 deletions(-) + +commit 252747ea73197ff0c9e52980907dd7bdd79951d7 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Dec 1 20:21:42 2012 +0100 + + Simplify setting print-to-file basename + + The logic that was used to determine the basename was + moved to eog_image_get_caption(). + + src/eog-window.c | 27 +++++++-------------------- + 1 file changed, 7 insertions(+), 20 deletions(-) + +commit e7bf0daef3c73bedcce3b59f59bcb8886003fed3 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Dec 1 20:15:56 2012 +0100 + + Make eog_image_get_caption() use GFileInfo + + GFileInfo has everything needed to get a UTF8-formatted filename + that can be displayed in the UI. + + src/eog-image.c | 77 +++++++++------------------------------------------------ + 1 file changed, 11 insertions(+), 66 deletions(-) + +commit c3b0e67b9ee1d7dc1d49be93a25bc4e50a8fafbb +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Dec 1 20:00:36 2012 +0100 + + Don't save the print-to-file output URI. + + This would break the print-to-file basename feature. + + https://bugzilla.gnome.org/show_bug.cgi?id=683335 + + src/eog-print.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit cb4907899494f083facbca5bb7c86aa2cc0f88ab +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Dec 1 19:59:39 2012 +0100 + + Raise GTK+ dependency for print-to-file basename + + https://bugzilla.gnome.org/show_bug.cgi?id=683335 + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit b60f391c595936088df8c9fcdcb3bf1ac91880a1 +Author: Federico Mena Quintero <federico@gnome.org> +Date: Tue Sep 4 09:59:45 2012 -0500 + + bgo#683335 - Set the basename for print-to-file + + Per https://live.gnome.org/GnomeGoals/PrintToFile , GTK+ 3.6 lets the application set a filename + for the print-to-file command so that GTK+ can present a better default than just 'output.pdf'. + + Signed-off-by: Federico Mena Quintero <federico@gnome.org> + + src/eog-window.c | 28 ++++++++++++++++++++++++++++ + 1 file changed, 28 insertions(+) + +commit 59742ad1ad828f07f48eb2b1206197d83279310d +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Tue Nov 27 17:05:29 2012 +0100 + + Updated Polish translation + + po/pl.po | 288 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 146 insertions(+), 142 deletions(-) + +commit 3cc54c3ccc058a463ee71a977ad701293819c863 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Thu Nov 22 17:58:44 2012 +0100 + + Updated Galician translations + + po/gl.po | 294 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 150 insertions(+), 144 deletions(-) + +commit 29d324c5f8fb09da7a5f810770627490f5fa0a8f +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 21 00:24:09 2012 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0aaeef8389d3b8e9a0f181eaedf20d5fb3ea6e72 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 21 00:17:20 2012 +0100 + + Prepare for release 3.7.2 + + NEWS | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +commit e48ca60f44fef3e61b11d1d75cd3569b3b622212 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Nov 9 21:41:12 2012 +0100 + + Remove unneeded export-symbols-regex libtool parameter + + The used regex seems to be broken and is causing trouble on BSD. + Drop it as doesn't seem to have an effect on the symbol list anyway. + + src/Makefile.am | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit d8cd1a756c8b4df10e097be90657763b3b34d311 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Fri Nov 9 12:07:38 2012 +0200 + + Updated Hebrew translation. + + po/he.po | 301 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 152 insertions(+), 149 deletions(-) + +commit dbf25d3df369809b31d9e313d68b603eb3b12ece +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Nov 6 19:12:57 2012 +0100 + + [toolbar-editor] Fix warnings due to wrong includes + + cut-n-paste/toolbar-editor/Makefile.am | 4 ---- + 1 file changed, 4 deletions(-) + +commit 84c746b2b23e8a0b80ee9e7f18a4414707cc8002 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Nov 6 19:08:45 2012 +0100 + + Fix build breakage due to void pointer arithmetic + + With recent gnome-common the build fails due to the arithmetics + using void pointers. Use the correct pointers to fix that. + + https://bugzilla.gnome.org/show_bug.cgi?id=687755 + + src/eog-metadata-reader-jpg.c | 6 ++++-- + src/eog-metadata-reader-png.c | 8 ++++---- + 2 files changed, 8 insertions(+), 6 deletions(-) + +commit 5fd3bb978fc4304aa4344ce3a930c9f90cac801c +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Mon Nov 5 19:25:31 2012 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 266 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 135 insertions(+), 131 deletions(-) + +commit 3068be9add238a0966ccb7c381689eff96389ea1 +Author: Andika Triwidada <andika@gmail.com> +Date: Sat Oct 27 15:22:32 2012 +0700 + + Updated Indonesian translation + + po/id.po | 288 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 145 insertions(+), 143 deletions(-) + +commit 43c11bf6bf752884ff32854c51639e5a49895e7a +Author: OKANO Takayoshi <kano@na.rim.or.jp> +Date: Fri Oct 26 23:12:03 2012 +0900 + + [l10n] Update Japanese Translation. + + help/ja/ja.po | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +commit 3e525fc78379439e04d260ebad073f20530274d7 +Author: Yasumichi Akahoshi <yasumichi@vinelinux.org> +Date: Fri Oct 26 23:09:32 2012 +0900 + + [l10n] remove location info. + + help/ja/ja.po | 473 ---------------------------------------------------------- + 1 file changed, 473 deletions(-) + +commit 50fa44faea08941e4cf8f56631560b51d8d8439a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 22 23:17:20 2012 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 6fd093f4afcc7a771e6e15444070a3d16fcd4335 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 22 23:11:02 2012 +0200 + + Prepare for release 3.7.1 + + NEWS | 35 +++++++++++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 36 insertions(+), 1 deletion(-) + +commit bf30cde502ac47d89754a4668f9dfa8edfc9e570 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Wed Oct 17 18:26:30 2012 +0200 + + Updated Spanish translation + + po/es.po | 289 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 148 insertions(+), 141 deletions(-) + +commit 5f239173232f2c9fb57a7ed02b5ed214b530bcb1 +Author: Hendrik Knackstedt <kn.hendrik@gmail.com> +Date: Tue Oct 16 10:47:01 2012 +0200 + + Updated German translation + + po/de.po | 298 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 152 insertions(+), 146 deletions(-) + +commit b23508382f0131d9961e437fe8c8453adeb84faa +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 13 14:12:38 2012 +0200 + + Add additional key codes for image switching using mouse buttons + + This should re-establish that function for newer X setups. + As we don't know whether the old keycodes could still occur, + we simply keep for compatibility. + + https://bugzilla.gnome.org/show_bug.cgi?id=684179 + + src/eog-window.c | 5 +++++ + 1 file changed, 5 insertions(+) + +commit 3fa5f85199c2aa8ff84beb1e67d70da0daf8769a +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sat Oct 13 12:32:28 2012 +0200 + + Updated Spanish translation + + help/es/es.po | 18 +++++++++++------- + 1 file changed, 11 insertions(+), 7 deletions(-) + +commit 42eefef163354b5c651e396995b6f8f1d28c3ff7 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 12 20:13:18 2012 +0200 + + Add trailing semicolon to desktop file keyword list translations + + Makes the desktop file validate again with desktop-file-utils-0.20. + + https://bugzilla.gnome.org/show_bug.cgi?id=685923 + + po/el.po | 2 +- + po/km.po | 2 +- + po/ml.po | 2 +- + 3 files changed, 3 insertions(+), 3 deletions(-) + +commit 9578d827cab8d853f93bad4de8f78687b1cadaac +Author: Alexandre Rostovtsev <tetromino@gentoo.org> +Date: Wed Oct 10 19:16:26 2012 -0400 + + Add 2DGraphics category to .desktop file + + Required to pass validation with desktop-file-utils 0.20 + + https://bugzilla.gnome.org/show_bug.cgi?id=685923 + + data/eog.desktop.in.in | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 05a3acdb672039eaf031e94de0a694289ec5973a +Author: Wouter Bolsterlee <uws@xs4all.nl> +Date: Sat Oct 6 14:59:25 2012 +0200 + + Updated Dutch translation + + po/nl.po | 385 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 200 insertions(+), 185 deletions(-) + +commit 9a1c01a65386359fc9f57a46a9e79906dd8f08a5 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sat Oct 6 12:57:41 2012 +0200 + + Updated Slovenian translation + + po/sl.po | 300 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 153 insertions(+), 147 deletions(-) + +commit 04369bbe464389601de1fd553e89b0865cd35a29 +Author: Martin Olsson <martin@minimum.se> +Date: Sat Sep 29 20:28:57 2012 +0200 + + Fix spelling errors in eog + + https://bugzilla.gnome.org/show_bug.cgi?id=685106 + + NEWS | 6 +++--- + help/bg/eog.xml | 2 +- + src/eog-exif-details.c | 2 +- + src/eog-metadata-reader.c | 2 +- + src/eog-pixbuf-util.c | 2 +- + src/eog-print-preview.c | 2 +- + src/eog-util.c | 2 +- + src/eog-window.c | 4 ++-- + 8 files changed, 11 insertions(+), 11 deletions(-) + +commit 3f43a6eff5f9c5fe2308f08a9e6d4cfba9453c35 +Author: Yuri Myasoedov <omerta13@yandex.ru> +Date: Wed Oct 3 21:49:04 2012 +0400 + + Updated Russian translation + + help/ru/ru.po | 5054 +++++++++++++++++++++++++++++++++++++++++++-------------- + 1 file changed, 3810 insertions(+), 1244 deletions(-) + +commit b795521633083ed98d40de19a8a62fd1f55430ed +Author: Khoem Sokhem <khoemsokhem@khmeros.info> +Date: Wed Oct 3 17:44:00 2012 +0200 + + [l10n] Added Khmer translation + + po/LINGUAS | 1 + + po/km.po | 1585 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1586 insertions(+) + +commit cc958f1201e12dc0a634ffc45995dd53b4793b19 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 28 19:43:26 2012 +0200 + + help: rename "Set as Desktop Background" -> "Set as Wallpaper" + + To match the recent UI string change. + + https://bugzilla.gnome.org/show_bug.cgi?id=684098 + + help/C/desktop-background.page | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 166a24f31454e9b1169c235fe6fc2494d91f55f8 +Author: Cosimo Cecchi <cosimoc@gnome.org> +Date: Mon Sep 17 10:43:51 2012 -0400 + + window: rename "Set as Desktop Background" -> "Set as Wallpaper" + + To be consistent with Nautilus. + + https://bugzilla.gnome.org/show_bug.cgi?id=684098 + + src/eog-window.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 01c1055062a23a56dff951d9d9e41a0605a8509b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Sep 23 17:56:08 2012 +0200 + + Drop now unneeded TotemScrSaver + + It's not needed anymore since GtkApplication does the job now. + + https://bugzilla.gnome.org/show_bug.cgi?id=684581 + + configure.ac | 1 - + cut-n-paste/Makefile.am | 2 +- + cut-n-paste/totem-screensaver/Makefile.am | 15 - + cut-n-paste/totem-screensaver/README | 3 - + cut-n-paste/totem-screensaver/totem-scrsaver.c | 547 ------------------------- + cut-n-paste/totem-screensaver/totem-scrsaver.h | 57 --- + doc/reference/Makefile.am | 2 - + 7 files changed, 1 insertion(+), 626 deletions(-) + +commit e8b50ab48a5a068ee56a29f9709b499d03781d4a +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Sep 23 17:50:02 2012 +0200 + + Use GtkApplication to inhibit the screensaver during slideshows + + Realized in a similar fashion as in Evince and Totem. + + https://bugzilla.gnome.org/show_bug.cgi?id=684581 + + configure.ac | 2 +- + src/Makefile.am | 5 ----- + src/eog-application-internal.h | 3 --- + src/eog-application.c | 30 ------------------------------ + src/eog-application.h | 4 ---- + src/eog-window.c | 39 +++++++++++++++++++++++++++++++++++++-- + 6 files changed, 38 insertions(+), 45 deletions(-) + +commit 25587b23f14c584bbeecef3992128754b26ce5ae +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Oct 2 19:23:41 2012 +0200 + + Post-branch version bump + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 6ccc7d2e946b5ac8dbf6284f0e2d3827e86a5c31 +Author: Aleix Badia i Bosch <aleix.badia.bosch@gmail.com> +Date: Fri Sep 28 00:04:28 2012 +0200 + + [l10n] Updated Catalan documentation + + help/ca/ca.po | 4233 +++++++++++++++++++++++++++++++++++++++------------------ + 1 file changed, 2879 insertions(+), 1354 deletions(-) + +commit 70491464632ddd1a9e023a659b0427314c64914a +Author: Carles Ferrando <carles.ferrando@gmail.com> +Date: Wed Sep 26 01:34:27 2012 +0200 + + [l10n] Updated Catalan (Valencian) translation + + po/ca@valencia.po | 359 +++++++++++++++++++++++++++--------------------------- + 1 file changed, 182 insertions(+), 177 deletions(-) + +commit 6ee51c7810a6cd991fcf5cb65f60f0fa822a6d3a +Author: Gil Forcada <gforcada@gnome.org> +Date: Wed Sep 26 01:34:16 2012 +0200 + + [l10n] Updated Catalan translation + + po/ca.po | 397 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 203 insertions(+), 194 deletions(-) + +commit 0f34a53e48e8718d58b0c5be87d7202f1ec41502 +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Tue Sep 25 21:47:27 2012 +0300 + + Added uk translation + + po/uk.po | 384 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 199 insertions(+), 185 deletions(-) + +commit b07d0f6a71c7c49e97ecf57b478d09fa601ca877 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 24 22:54:24 2012 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ca32e07725eeeb10fbc1f2592c330cd66ab9f679 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 24 22:49:49 2012 +0200 + + Prepare for release 3.6.0 + + NEWS | 22 ++++++++++++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 24 insertions(+), 2 deletions(-) + +commit 0eade78af347a8beb65171ed0959b40851b54c8e +Author: Tom Tryfonidis <tomtryf@gmail.com> +Date: Mon Sep 24 13:30:46 2012 +0300 + + Updated Greek help translation + + help/el/el.po | 27 ++++++++++----------------- + 1 file changed, 10 insertions(+), 17 deletions(-) + +commit 040c4474225ec6234bf74cc8458aaeec5691f62b +Author: Mattias Põldaru <mahfiaz@gmail.com> +Date: Mon Sep 24 10:43:09 2012 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 101 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 54 insertions(+), 47 deletions(-) + +commit d1519054fd621cc4148ac39ed6b5a66f9dc6497e +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sun Sep 23 21:27:53 2012 +0200 + + Updated Galician translations + + help/gl/gl.po | 4519 +++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 2461 insertions(+), 2058 deletions(-) + +commit 91d3bff55f087d331d9e8e9dded7e40895f2c63c +Author: Praveen Arimbrathodiyil <pravi.a@gmail.com> +Date: Sun Sep 23 10:14:44 2012 +0530 + + Malayalam translation update from Anish A + + po/ml.po | 1023 +++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 545 insertions(+), 478 deletions(-) + +commit 170701c7381cf8cd469c31fbf01712b3bed5fba8 +Author: YunQiang Su <yqsu@src.gnome.org> +Date: Sun Sep 23 03:10:39 2012 +0800 + + update Simplified Chinese (zh_CN) translation + + po/zh_CN.po | 374 +++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 195 insertions(+), 179 deletions(-) + +commit 1d89b1399d0aff24907f8fcc3e561209f97279d4 +Author: Anita Reitere <nitalynx@gmail.com> +Date: Sat Sep 22 21:05:21 2012 +0300 + + Updated Latvian translation + + po/lv.po | 480 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 247 insertions(+), 233 deletions(-) + +commit c7db33e3ef4765c80f446ec76725984b6605ef59 +Author: Rajesh Ranjan <rranjan@redhat.com> +Date: Sat Sep 22 15:50:31 2012 +0530 + + hindi update + + po/hi.po | 1568 +++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 827 insertions(+), 741 deletions(-) + +commit e825d3588b37cbaae9bf4eec5529c3444e33daa0 +Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> +Date: Fri Sep 21 11:01:11 2012 +0200 + + Updated Slovenian translation + + help/sl/sl.po | 2990 ++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 1583 insertions(+), 1407 deletions(-) + +commit 749437a34ddc2857f88168fc75f8ac585d5b8ea7 +Author: Kalev Lember <kalevlember@gmail.com> +Date: Wed Sep 19 21:50:08 2012 +0200 + + Explicitly link against libm + + https://bugzilla.gnome.org/show_bug.cgi?id=684401 + + configure.ac | 7 +++++++ + src/Makefile.am | 3 ++- + 2 files changed, 9 insertions(+), 1 deletion(-) + +commit 6047190310d22baa6933b3e31b4551a2752736bf +Author: Alexander Shopov <ash@kambanaria.org> +Date: Wed Sep 19 20:55:41 2012 +0300 + + Updated Bulgarian translation + + po/bg.po | 342 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 175 insertions(+), 167 deletions(-) + +commit f690bd8b1ee43eb7e1c157c4c422fd54e40a67d9 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Sep 19 18:31:43 2012 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 1d4f5a79a8aca03834b67c3e396a0072ad70d315 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Sep 19 18:20:04 2012 +0200 + + Prepare for release 3.5.92 + + NEWS | 34 ++++++++++++++++++++++++++++++++++ + 1 file changed, 34 insertions(+) + +commit 81375bd523173b4e76d2bc3aac9c09b1063198cf +Author: Dr.T.Vasudevan <agnihot3@gmail.com> +Date: Wed Sep 19 16:52:54 2012 +0530 + + updated Tamil translation + + po/ta.po | 373 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 191 insertions(+), 182 deletions(-) + +commit 6e3bd83c946d4a932393acfff47f778843e49331 +Author: Michael Wood <michael.g.wood@linux.intel.com> +Date: Mon Sep 17 11:34:59 2012 +0100 + + Set the saved value for the number of copies printed to 1 + + This avoids accidentally printing the wrong amount as this value is not + expected to be restored from previous sessions. + + https://bugzilla.gnome.org/show_bug.cgi?id=623604 + + src/eog-print.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +commit bca0db855613ba1ed197710a1f9517f3e52aa7f7 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sun Sep 16 13:15:42 2012 +0200 + + Updated Spanish translation + + po/es.po | 265 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 132 insertions(+), 133 deletions(-) + +commit 2b798ac9b6e7b48267265480c414190ee625ff89 +Author: Ask H. Larsen <asklarsen@gmail.com> +Date: Sun Sep 16 13:13:06 2012 +0200 + + Updated Danish translation + + po/da.po | 388 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 200 insertions(+), 188 deletions(-) + +commit 3832a75bc6c7a6aae650db23aa76c4a4ae9f3fbb +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Fri Sep 14 18:31:21 2012 +0200 + + Fix broken tag in Galician help translation + + help/gl/gl.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d6edf2d1e0791d43b021447fa3e7a3f205980eb4 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Fri Sep 14 10:52:06 2012 +0200 + + Update Hungarian help translation + + help/hu/hu.po | 4542 +++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 2486 insertions(+), 2056 deletions(-) + +commit 1882feb9160655eb35126e024943da7362c92c27 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Thu Sep 13 20:57:04 2012 +0200 + + Fix broken tags in Latvian help translation + + help/lv/lv.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit a021d901b2164882747a938f463669d18191aea3 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu Sep 13 12:06:35 2012 +0200 + + Updated Spanish translation + + help/es/es.po | 15 +++++---------- + 1 file changed, 5 insertions(+), 10 deletions(-) + +commit 132c809856a657e742fe59d07a00a24731c72e2f +Author: Timo Jyrinki <timo@debian.org> +Date: Wed Sep 12 18:47:01 2012 +0300 + + Finnish translation update by Jiri Grönroos + + po/fi.po | 637 +++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 399 insertions(+), 238 deletions(-) + +commit 131068e5a4d766020511001f2e4dabd53b028153 +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Tue Sep 11 19:18:31 2012 +0200 + + Fix French translation for real + + help/fr/fr.po | 395 +++++++++++++++++----------------------------------------- + 1 file changed, 117 insertions(+), 278 deletions(-) + +commit 8b1995c2d664b6394fc01975023dd7c5fe4af7fc +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Tue Sep 11 19:06:53 2012 +0200 + + Fix French translation + + help/fr/fr.po | 4661 +++++++++++++++++++++++++++++++-------------------------- + po/fr.po | 4367 ++++++++++++++++++----------------------------------- + 2 files changed, 3980 insertions(+), 5048 deletions(-) + +commit 0c37becd6113c66f40cd5f8cccfd0bf1232f59ad +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Tue Sep 11 18:49:39 2012 +0200 + + Update French translation + + po/fr.po | 4367 ++++++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 2947 insertions(+), 1420 deletions(-) + +commit 59afab38a1ff97b6ba73c2631cc341040db12e35 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Mon Sep 10 21:15:56 2012 +0200 + + [l10n] Updated Italian translation. + + po/it.po | 992 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 500 insertions(+), 492 deletions(-) + +commit 04dbac694b2864ae5f803cdcc9843c0e4f34e023 +Author: Alexandre Franke <alexandre.franke@gmail.com> +Date: Mon Sep 10 09:22:30 2012 +0200 + + Update French translation + + po/fr.po | 330 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 169 insertions(+), 161 deletions(-) + +commit a1dc614aaf4b59e80eeae46a09400207f09cf013 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sun Sep 9 20:28:12 2012 +0700 + + Updated Vietnamese translation + + po/vi.po | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +commit 4406cdea75e3587c9aa1d9e9e39cab9a013f3960 +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sun Sep 9 06:02:08 2012 +0900 + + Updated Korean translation + + po/ko.po | 389 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 200 insertions(+), 189 deletions(-) + +commit 66aa3fd35d46230a0e49f77ce959cdb53234734f +Author: Marek Černocký <marek@manet.cz> +Date: Sat Sep 8 00:33:57 2012 +0200 + + Updated Czech translation + + po/cs.po | 399 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 204 insertions(+), 195 deletions(-) + +commit 7a54f606d26270fc0cc1c029bccba0e6189a9c1b +Author: Tom Tryfonidis <tomtryf@gmail.com> +Date: Sat Sep 8 00:14:11 2012 +0300 + + Updated Greek help translation + + help/el/el.po | 131 +++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 69 insertions(+), 62 deletions(-) + +commit f33a7b7c5d0690a916908bc033a3ae2f53c1d022 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 7 18:57:15 2012 +0200 + + Raise librsvg dependency to 2.36.2 + + The old minimum version (2.26.0) is pretty old and behind with + bugfixes and features. Raising the minimum librsvg version to 2.36.2 + allows dropping some compatibility ifdefs and code. It also fixes + several compiler warnings when compiling against newer librsvgs. + + configure.ac | 2 +- + src/eog-image.c | 1 - + src/eog-print.c | 2 +- + src/eog-scroll-view.c | 1 - + src/main.c | 7 ------- + 5 files changed, 2 insertions(+), 11 deletions(-) + +commit 0354d06a99fdf6ff56cce258447637a0d7c64282 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Fri Sep 7 17:51:02 2012 +0300 + + Updated Belarusian translation. + + po/be.po | 325 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 166 insertions(+), 159 deletions(-) + +commit 34df0c697b81865ecff5e0b1f928ad4bd5998867 +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Thu Sep 6 21:27:43 2012 +0700 + + Updated Thai translation. + + po/th.po | 1333 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 667 insertions(+), 666 deletions(-) + +commit 4e8771c469685cb8846fe8a4c6f19d3d994039d9 +Author: Fábio Nogueira <fnogueira@gnome.org> +Date: Thu Sep 6 09:14:35 2012 -0400 + + Updated Brazilian Portuguese translation. + + po/pt_BR.po | 420 +++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 216 insertions(+), 204 deletions(-) + +commit e1b3b54fd818079e628681e5c23d3d981857bacd +Author: Arash Mousavi <mousavi.arash@gmail.com> +Date: Thu Sep 6 17:05:52 2012 +0430 + + l10n: Updated Persian translation + + po/fa.po | 644 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 362 insertions(+), 282 deletions(-) + +commit 6471f33009ababf64a079155c3a472f9a3cfb37e +Author: Bruce Cowan <bruce@bcowan.me.uk> +Date: Wed Sep 5 19:38:19 2012 +0100 + + Updated British English translation + + po/en_GB.po | 380 +++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 196 insertions(+), 184 deletions(-) + +commit de7fd620d42e8d012e845ad49fc85e020974142c +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Tue Sep 4 21:51:20 2012 +0200 + + [l10n] Updated German doc translation + + help/de/de.po | 23 +++++++++++++++-------- + 1 file changed, 15 insertions(+), 8 deletions(-) + +commit 6f8c4f332f2a5ce34a175ab174ce996ed6664bb8 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Tue Sep 4 09:17:07 2012 +0200 + + Updated Hungarian translation + + po/hu.po | 976 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 498 insertions(+), 478 deletions(-) + +commit 22e1750ce9b90a2c0ab1a98cc34b2b982c81b6c2 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 3 22:55:57 2012 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 5875e4f75f2f956d8fc809d9b4904266f677cf6b +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 3 22:51:24 2012 +0200 + + Prepare for release 3.5.91 + + NEWS | 30 ++++++++++++++++++++++++++++++ + 1 file changed, 30 insertions(+) + +commit 7bf71e971a4a7936a515bb1dfb6c461f5af2c927 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Sep 3 15:56:09 2012 +0200 + + Updated Spanish translation + + help/es/es.po | 116 ++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 60 insertions(+), 56 deletions(-) + +commit 4737e08a6c3f8648d36e7bec84bbd63feb89152a +Author: A S Alam <aalam@users.sf.net> +Date: Mon Sep 3 07:26:07 2012 +0530 + + update Punjabi Translation + + po/pa.po | 398 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 206 insertions(+), 192 deletions(-) + +commit 0d881cfd227e6a8f5129c1c1b0d2edcf35215505 +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Sun Sep 2 20:20:46 2012 +0200 + + [l10n] Updated German doc translation + + help/de/de.po | 4994 ++++++++++++++++++++++++++------------------------------- + 1 file changed, 2263 insertions(+), 2731 deletions(-) + +commit cac1af13496cd041d1fdbdb075ea1240d2101acb +Author: Paul Seyfert <pseyfert@mathphys.fsk.uni-heidelberg.de> +Date: Sun Sep 2 10:33:59 2012 +0200 + + [l10n] Updated German translation + + po/de.po | 355 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 182 insertions(+), 173 deletions(-) + +commit 72d060af4afc422bf0a86807ce122d66ba84ece1 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sat Sep 1 22:14:12 2012 +0200 + + Updated Polish translation + + po/pl.po | 28 ++++++++++++++++++++++------ + 1 file changed, 22 insertions(+), 6 deletions(-) + +commit 22e9c6ce7d7dbc1918a38bf8917e4299271c8e35 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Sep 1 18:23:38 2012 +0200 + + help: Fix keys in shortcut list to reflect changed bindings + + https://bugzilla.gnome.org/show_bug.cgi?id=659830 + + help/C/shortcuts.page | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +commit 43e98cdad65f957cb675957d99943ed64d27e4aa +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Sep 1 18:16:40 2012 +0200 + + Fix arrow key shortcuts in Go menu to reflect behavioural changes + + https://bugzilla.gnome.org/show_bug.cgi?id=659830 + + src/eog-window.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 2bc5ba9f1cbee4fb1ccf12d9b844e3b69b55f9cf +Author: Federico Mena Quintero <federico@gnome.org> +Date: Wed Aug 29 18:41:01 2012 -0500 + + My @gnu.org email doesn't work anymore; fix it with @gnome.org that works. + + AUTHORS | 2 +- + README | 2 +- + src/eog-config-keys.h | 2 +- + src/eog-statusbar.c | 2 +- + src/eog-statusbar.h | 2 +- + src/eog-window.c | 6 +++--- + src/eog-window.h | 2 +- + src/main.c | 2 +- + src/uta.c | 2 +- + src/uta.h | 2 +- + src/zoom.c | 2 +- + src/zoom.h | 2 +- + 12 files changed, 14 insertions(+), 14 deletions(-) + +commit 9fe57cb979e328d9cbe4f9219630c3bd386fe854 +Author: Federico Mena Quintero <federico@gnome.org> +Date: Wed Aug 29 18:13:22 2012 -0500 + + bgo#659830 - Arrow keys should always navigate, never scroll + + We use plain arrow keys to navigate the image list, regardless of whether the image is + zoomed or whether it has the focus. We use Alt+arrows to scroll the image. + + This is to make it easier to browse an image collection while at the same time zooming + on images from time to time. + + Signed-off-by: Federico Mena Quintero <federico@gnome.org> + + src/eog-scroll-view.c | 70 ++++++++++++++++++++---------------- + src/eog-window.c | 98 +++++++++++++++++---------------------------------- + 2 files changed, 72 insertions(+), 96 deletions(-) + +commit 32cc9464461ef0326d3ecb27a494b1af2d8101eb +Author: Federico Mena Quintero <federico@gnome.org> +Date: Wed Aug 29 17:38:11 2012 -0500 + + Test for modifier keys correctly in EogWindow + + See http://developer.gnome.org/gtk3/stable/checklist-modifiers.html for an explanation + of how this works. + + Signed-off-by: Federico Mena Quintero <federico@gnome.org> + + https://bugzilla.gnome.org/show_bug.cgi?id=659830 + + src/eog-window.c | 13 ++++++++----- + 1 file changed, 8 insertions(+), 5 deletions(-) + +commit bd4f71ebe5da189495168b34e8b18b3ff5698901 +Author: Duarte Loreto <happyguy_pt@hotmail.com> +Date: Wed Aug 29 00:39:04 2012 +0100 + + Updated Portuguese translation + + po/pt.po | 378 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 194 insertions(+), 184 deletions(-) + +commit 4a4a1c4d89990b44a1a2f8837f36fb261348b1ba +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Tue Aug 28 23:19:49 2012 +0300 + + Updated Lithuanian translation + + po/lt.po | 431 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 225 insertions(+), 206 deletions(-) + +commit 16baf8ceeb21287ba3e8c3eb306f13d8663c6f2c +Author: Yasumichi Akahoshi <yasumichi@vinelinux.org> +Date: Tue Aug 28 08:35:17 2012 +0900 + + [l10n] Update Japanese translation + + help/ja/ja.po | 3791 ++++++++++++++++++++++++--------------------------------- + 1 file changed, 1588 insertions(+), 2203 deletions(-) + +commit b5c76adf072e2de314d8d22ab0a2816635b8818c +Author: Nilamdyuti Goswami <nilamdyuti@gmail.com> +Date: Mon Aug 27 23:10:31 2012 +0530 + + Implemented FUEL entries to Assamese translation + + po/as.po | 74 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 37 insertions(+), 37 deletions(-) + +commit 5d7190b7b87c1fa6ff0f32b95cbfaed27c8afe10 +Author: Yuri Myasoedov <omerta13@yandex.ru> +Date: Sat Aug 25 21:17:45 2012 +0400 + + Updated Russian translation + + po/ru.po | 318 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 162 insertions(+), 156 deletions(-) + +commit e63ebfd8ec8c81c7fbf4a9eb0fe4d437831cd20b +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Aug 24 18:36:53 2012 +0200 + + Updated Spanish translation + + help/es/es.po | 106 +++++++++------------------------------------------------- + 1 file changed, 15 insertions(+), 91 deletions(-) + +commit e89c6c7c8055280ed7f227f8938f2c7cf2275098 +Author: Yasumichi Akahoshi <yasumichi@vinelinux.org> +Date: Thu Aug 23 00:55:13 2012 +0900 + + Fix description about "Fullscreen with double-click" + + Signed-off-by: Yasumichi Akahoshi <yasumichi@vinelinux.org> + + help/C/plugins.page | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +commit 6d4cb470ff22190601a465800afb7d66e57cc22e +Author: Tom Tryfonidis <tomtryf@gmail.com> +Date: Thu Aug 23 18:19:58 2012 +0300 + + Updated Greek help translation + + help/el/el.po | 5824 +++++++++++++++++++++++---------------------------------- + 1 file changed, 2326 insertions(+), 3498 deletions(-) + +commit a46aaa337d39c5d14511cf05f72db91ac249fd83 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Wed Aug 22 14:18:36 2012 +0700 + + Updated Vietnamese translation + + po/vi.po | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +commit cff1a24c36a86eb40e52d08dbbd62ed35cadc84d +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Wed Aug 22 14:18:14 2012 +0700 + + po/vi: imported from Damned Lies + + po/vi.po | 317 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 163 insertions(+), 154 deletions(-) + +commit c61538808bd8801bc16f3e8f5d2c9d7e1ffe1d9e +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Wed Aug 22 00:13:46 2012 +0200 + + Updated Polish translation + + po/pl.po | 990 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 500 insertions(+), 490 deletions(-) + +commit 591e679ce9a5dd53107e191a517bc0980e666242 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 20 21:46:41 2012 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 53cba8005b0137eb31a86c5950bee3be652a25ee +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 20 21:41:49 2012 +0200 + + Prepare for release 3.5.90 + + NEWS | 25 +++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 26 insertions(+), 1 deletion(-) + +commit 06f182b55a846f51708fac1f67ceaca8bcc3198f +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Aug 20 14:13:30 2012 +0200 + + Updated Spanish translation + + help/es/es.po | 4536 ++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 2351 insertions(+), 2185 deletions(-) + +commit c38972da679e5ca0b6c388dfc36d91561f4f8b7a +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Aug 17 17:29:07 2012 +0200 + + Update git.mk for compatibility with new help docs infrastructure + + Updated to revision 50bfcb24c from https://github.com/behdad/git.mk + + git.mk | 76 +++++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 50 insertions(+), 26 deletions(-) + +commit a0ee3f7cf078b95f0220a3c74ee14a5d895b9b57 +Author: Javier Jardón <jjardon@gnome.org> +Date: Fri Aug 17 02:18:09 2012 +0900 + + Port to new documentation infrastructure + + Use yelp-tools instead gnome-doc-utils + + Makefile.am | 15 ++++----------- + autogen.sh | 2 +- + configure.ac | 8 ++++---- + help/Makefile.am | 13 ++++++------- + src/eog-util.c | 4 ++-- + 5 files changed, 17 insertions(+), 25 deletions(-) + +commit b3e101d703384966956cc5305faa18cfbcf0c538 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Aug 17 10:31:32 2012 +0200 + + Updated Spanish translation + + po/es.po | 1939 +++++++++++++++++++++++++++++++++++++++++++++++++++++--------- + 1 file changed, 1662 insertions(+), 277 deletions(-) + +commit 7162505f6814685827b8fab03a1679ba7af7f986 +Author: Miguel Rodriguez <bokerones.fritos@gmail.com> +Date: Fri Aug 17 10:28:24 2012 +0200 + + Updated Spanish translation + + po/es.po | 1939 +++++++++----------------------------------------------------- + 1 file changed, 277 insertions(+), 1662 deletions(-) + +commit 0b04960ad9b52e50a19aef5a756370201834e306 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Thu Aug 16 23:41:13 2012 +0200 + + Updated Galician translations + + po/gl.po | 298 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 149 insertions(+), 149 deletions(-) + +commit f231a2b4272be2adb66ebbec3a00cf01245bf2a6 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Aug 13 10:44:45 2012 +0200 + + Updated Spanish translation + + help/es/es.po | 551 +++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 370 insertions(+), 181 deletions(-) + +commit 78a214b3a3359e72fa4cdf62b37bbc45bf9810c4 +Author: Dirgita <dirgitadevina@yahoo.co.id> +Date: Mon Aug 13 05:51:36 2012 +0700 + + Updated Indonesian translation + + po/id.po | 606 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 352 insertions(+), 254 deletions(-) + +commit e6470787023be114bcfe9fa923e561bd40634161 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 12 16:35:46 2012 +0200 + + EogApplication: Make most members private + + This allows plugin usage without installing toolbar editor headers. + + src/Makefile.am | 1 + + src/eog-application-internal.h | 68 +++++++++++++++++++++++++ + src/eog-application.c | 109 +++++++++++++++++++++++------------------ + src/eog-application.h | 25 ++-------- + src/eog-window.c | 9 ++-- + src/main.c | 3 +- + 6 files changed, 140 insertions(+), 75 deletions(-) + +commit cdfe77e18b7510e51546b869343f3feda4c541bf +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 12 15:53:18 2012 +0200 + + Add new plugin hook for per-application plugins + + These will be loaded on application initialization and disabled + once the application is disposed. + + src/Makefile.am | 2 + + src/eog-application-activatable.c | 85 +++++++++++++++++++++++++++++++++++++++ + src/eog-application-activatable.h | 69 +++++++++++++++++++++++++++++++ + src/eog-application.c | 33 +++++++++++++++ + src/eog-application.h | 4 ++ + 5 files changed, 193 insertions(+) + +commit 0048b07fadb3426da2a09a0e0ff1b2f95153518b +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Sun Aug 12 22:49:42 2012 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 311 +++++++++++++++++++++++++++++++----------------------------- + po/zh_TW.po | 311 +++++++++++++++++++++++++++++++----------------------------- + 2 files changed, 320 insertions(+), 302 deletions(-) + +commit 9b65ec0cf520a9a592255c61454fcbe82c2cc205 +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Sat Aug 11 14:25:22 2012 -0400 + + help: update xmls:if to 1.0 + + help/C/plugins.page | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 3a647edfaca44f72360f8db71b085240b1e4f357 +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Sat Aug 11 12:12:21 2012 -0400 + + help: Fix link to l10n.gnome.org in translate.pgae + + help/C/translate.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ce3c4f82e5c327614180d41ff7f550a77c55701e +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Sat Aug 11 12:02:16 2012 -0400 + + Add new help files to help/Makefile.am + + help/Makefile.am | 2 ++ + 1 file changed, 2 insertions(+) + +commit fabbea3dc5995a2815cec29d86210799c36ff67c +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Sat Aug 11 12:01:41 2012 -0400 + + Bring back plugin-postr.page + + help/C/plugin-postr.page | 57 ++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 57 insertions(+) + +commit e06fe41683b075b9095ae6d536cdbcc0262acfd6 +Author: Fabiana Simões <fabianapsimoes@gmail.com> +Date: Sat Aug 11 09:32:46 2012 -0300 + + Overall revision of user documentation, added pages for the picasa and fullscreen background plugins + + help/C/plugin-fullscreen-background.page | 30 ++++++++++++++++++++++++++++++ + help/C/plugin-picasa.page | 32 ++++++++++++++++++++++++++++++++ + 2 files changed, 62 insertions(+) + +commit 6bb1cadd2f9ed4357fc1c272f7519b1ffa062276 +Author: Fabiana Simões <fabianapsimoes@gmail.com> +Date: Sat Aug 11 09:32:02 2012 -0300 + + Overall revision of user documentation, added pages for the picasa and fullscreen background plugins + + help/C/commandline.page | 23 +++++++++-------- + help/C/copy-paste.page | 6 ++++- + help/C/default.page | 4 +++ + help/C/edit.page | 8 +++--- + help/C/format-change.page | 12 ++++----- + help/C/formats-save.page | 6 ++++- + help/C/plugin-exif-digital.page | 15 +++++++++-- + help/C/plugin-postr.page | 57 ----------------------------------------- + help/C/plugins.page | 31 ++++++++++++++-------- + 9 files changed, 71 insertions(+), 91 deletions(-) + +commit 8321658cf196bde4d86df01a47967b8262131402 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Fri Aug 10 15:37:35 2012 +0300 + + Updated Hebrew translation. + + po/he.po | 819 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 417 insertions(+), 402 deletions(-) + +commit 79de1ccdb81e35f0a31175e898b5b6429b412d2e +Author: Muhammet Kara <muhammetk@acikkaynak.name.tr> +Date: Thu Aug 9 17:08:32 2012 +0300 + + [l10n]Updated Turkish translation + + po/tr.po | 356 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 185 insertions(+), 171 deletions(-) + +commit b8a4ccab22b1775c9f54e750d8bab5d55b19b553 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Wed Aug 8 08:56:01 2012 +0200 + + Updated Arabic translation + + po/ar.po | 302 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 155 insertions(+), 147 deletions(-) + +commit db5aaf2142783069d1c1f5e79b530472395654d9 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 6 22:27:08 2012 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0f6080befec18d51e1568bbbe283df45c68a8a57 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 6 22:19:46 2012 +0200 + + Prepare for release 3.5.4 + + NEWS | 30 ++++++++++++++++++++++++++++++ + 1 file changed, 30 insertions(+) + +commit cc6a99635632be1150dcb0e5a938d23e03d83535 +Author: Tom Tryfonidis <tomtryf@gmail.com> +Date: Mon Aug 6 17:53:39 2012 +0300 + + Updated Greek translation + + po/el.po | 992 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 457 insertions(+), 535 deletions(-) + +commit 99eeb141d9bc7a1bdacadf6d276c20c4b71f742c +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Sat Aug 4 05:03:32 2012 +0200 + + Updated Serbian translation + + po/sr.po | 335 +++++++++++++++++++++++++++++---------------------------- + po/sr@latin.po | 335 +++++++++++++++++++++++++++++---------------------------- + 2 files changed, 344 insertions(+), 326 deletions(-) + +commit 1462d39c08f7af4939f11f0c6105ee0318258c3f +Author: Nilamdyuti Goswami <nilamdyuti@gmail.com> +Date: Fri Aug 3 14:36:54 2012 +0530 + + Assamese translation updated + + po/as.po | 300 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 155 insertions(+), 145 deletions(-) + +commit 3bc735cfa0d6770462d356be582b89f9cde01eda +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Thu Aug 2 12:06:36 2012 +0900 + + [l10n] Update Japanese translation + + Modify the About label + + po/ja.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 1b2df80d5750ac70406770640a95dcea33aec8aa +Author: Jiro Matsuzawa <jmatsuzawa@gnome.org> +Date: Tue Jul 31 23:13:04 2012 +0900 + + [l10n] Update Japanese translation + + po/ja.po | 316 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 162 insertions(+), 154 deletions(-) + +commit eb16effdd3857024dc152a2b60b4ac62a0ebea40 +Author: Sweta Kothari <swkothar@redhat.com> +Date: Mon Jul 30 11:31:41 2012 +0530 + + Updated gujarati file + + po/gu.po | 387 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 201 insertions(+), 186 deletions(-) + +commit 2025ddbdb924d2bf78a1c8bffbdc0db54c357fd3 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Mon Jul 30 02:53:09 2012 +0200 + + Updated Galician translations + + po/gl.po | 328 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 168 insertions(+), 160 deletions(-) + +commit f12331636af7a25b4d0e2d405395706627e1e546 +Author: Praveen Illa <mail2ipn@gmail.com> +Date: Sun Jul 29 23:46:41 2012 +0530 + + Updated Telugu Translation + + po/te.po | 413 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 211 insertions(+), 202 deletions(-) + +commit c82789bc9e10a6f950b9f02e539b226ccd7746c1 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sun Jul 29 14:35:07 2012 +0200 + + Updated Slovenian translation + + po/sl.po | 349 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 182 insertions(+), 167 deletions(-) + +commit c7c8883ce4f4ccefe2078ade9b4dbb1e53f643f4 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Jul 27 11:32:17 2012 +0200 + + Updated Spanish translation + + po/es.po | 330 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 170 insertions(+), 160 deletions(-) + +commit 2f0e379327c57660478a7f2556198b929b35e184 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Thu Jul 26 10:31:33 2012 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 316 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 162 insertions(+), 154 deletions(-) + +commit ab2690d6dfb3a00ced662328b78bfbbfd7895a4c +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Wed Jul 25 22:46:29 2012 +0200 + + Updated POTFILES.in + + po/POTFILES.in | 1 + + 1 file changed, 1 insertion(+) + +commit 232292e570192ff41a6509f381953803cf39e188 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jun 7 15:47:30 2012 +0200 + + Provide an app menu + + Heavily based on nautilus' app menu implementation. + + https://bugzilla.gnome.org/show_bug.cgi?id=674938 + + data/Makefile.am | 1 + + data/eog-app-menu.xml | 47 +++++++++++++ + src/eog-application.c | 184 ++++++++++++++++++++++++++++++++++++++++++++++++++ + src/eog-application.h | 2 + + src/eog-window.c | 144 +++++++++++++++++++++------------------ + src/eog-window.h | 6 ++ + 6 files changed, 318 insertions(+), 66 deletions(-) + +commit 3015f99d84eb1bcd267ef34e7e341a47a740bedd +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 25 20:47:54 2012 +0200 + + EogWindow: Fix indentation + + src/eog-window.c | 54 +++++++++++++++++++++++++++--------------------------- + 1 file changed, 27 insertions(+), 27 deletions(-) + +commit 332912fd4deadac51c17043392025aecd8b10b2b +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 25 20:44:05 2012 +0200 + + EogWindow: React to changes of the *bar GSettings keys again + + src/eog-window.c | 26 +++++++++++++++++++++----- + 1 file changed, 21 insertions(+), 5 deletions(-) + +commit 2232759af2c7f04596ea2e150f8d373a708cc1c3 +Author: Tobias Endrigkeit <tobiasendrigkeit@googlemail.com> +Date: Mon Jul 23 22:56:33 2012 +0200 + + Updated German translation + + po/de.po | 954 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 485 insertions(+), 469 deletions(-) + +commit e2231eb80cd841a47b496d13162b04a1c6ea8891 +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Mon Jul 23 00:22:23 2012 +0200 + + Updated Serbian translation + + po/sr.po | 562 ++++++++++++++++++++------------------------------------- + po/sr@latin.po | 562 ++++++++++++++++++++------------------------------------- + 2 files changed, 384 insertions(+), 740 deletions(-) + +commit 259138cf53dfd00824236fd59a87006b109bddc4 +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Fri Jul 20 23:35:27 2012 +0300 + + Added Greek snapshots + + help/el/figures/eog-toolbar-editor.png | Bin 0 -> 17610 bytes + help/el/figures/eog_start_window.png | Bin 16611 -> 0 bytes + help/el/figures/eog_toolbar_editor_window.png | Bin 28997 -> 0 bytes + help/el/figures/image-view-prefs.png | Bin 0 -> 18095 bytes + help/el/figures/multiple-convert.png | Bin 0 -> 19778 bytes + help/el/figures/multiple-rename-count.png | Bin 0 -> 19607 bytes + help/el/figures/plugins-all.png | Bin 0 -> 40682 bytes + help/el/figures/prefs-plugins-date.png | Bin 0 -> 57455 bytes + help/el/figures/prefs-plugins-fullscreen.png | Bin 0 -> 58628 bytes + help/el/figures/prefs-plugins.png | Bin 0 -> 56118 bytes + help/el/figures/slideshow-prefs.png | Bin 0 -> 45195 bytes + 11 files changed, 0 insertions(+), 0 deletions(-) + +commit 5707f55ac258ee5941f6a1dadb8e13f1912d7d53 +Author: Dimitris Spingos <dmtrs32@gmail.com> +Date: Fri Jul 20 17:58:55 2012 +0300 + + Updated Greek translation-help + + help/el/el.po | 4920 +++++++++++++++++++++++++++++++++++++++++++++++---------- + 1 file changed, 4061 insertions(+), 859 deletions(-) + +commit 6041690dd948b5ecc17ef157b9abab725866c45f +Author: Andika Triwidada <andika@gmail.com> +Date: Thu Jul 19 11:34:26 2012 +0700 + + Updated Indonesian translation + + po/id.po | 340 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 169 insertions(+), 171 deletions(-) + +commit 9127374cd0f2e6484f74b7cded3b2005125e9f78 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Wed Jul 18 19:26:45 2012 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 990 ++++++++++++++++++++++++++++---------------------------- + po/zh_TW.po | 1030 ++++++++++++++++++++++++++++++----------------------------- + 2 files changed, 1014 insertions(+), 1006 deletions(-) + +commit 5d2dddbc58b85210604fb713c43811041b29c147 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Jul 17 19:35:30 2012 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d4eaf4304fed98a2cfa7a2832f44f7b71bc9314a +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Jul 17 19:29:20 2012 +0200 + + Prepare for release 3.5.3 + + NEWS | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +commit 965dbc0a98037efec5cb754a6f03a0e4d14c4b57 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Sun Jul 15 14:45:04 2012 +0300 + + Updated Belarusian translation. + + po/be.po | 292 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 147 insertions(+), 145 deletions(-) + +commit 46fb71380a565e43b2e216d906f8d77a336b9333 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jul 6 23:52:41 2012 +0200 + + EogCloseConfirmationDialog: Fix size request for the image list + + Change the size request of the encasing ScrolledWindow instead of the + TreeView itself. Otherwise the list would hardly show one row. + + https://bugzilla.gnome.org/show_bug.cgi?id=679505 + + src/eog-close-confirmation-dialog.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c88190f9849963c3a09f901ccd37c60494f35ba8 +Author: Alexander Shopov <ash@kambanaria.org> +Date: Wed Jul 4 07:22:20 2012 +0300 + + Updated Bulgarian translation + + po/bg.po | 286 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 144 insertions(+), 142 deletions(-) + +commit efe785246025784e0f790fdf8584189f55dfea27 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sat Jun 30 20:17:47 2012 +0700 + + Updated Vietnamese translation + + po/vi.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit f07a06ee104385d7cc4fa1d0a295ef38abc92277 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sat Jun 30 20:16:58 2012 +0700 + + po/vi: import from Damned Lies + + po/vi.po | 296 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 150 insertions(+), 146 deletions(-) + +commit b6b435892d55e22bbbafd63ac3752aff590f98a6 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 25 21:48:10 2012 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 38e32f933c2a4f8630924e39ad75f65495148f72 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 25 21:32:21 2012 +0200 + + Prepare for release 3.5.2 + + NEWS | 31 +++++++++++++++++++++++++++++++ + 1 file changed, 31 insertions(+) + +commit fb4f7ce3e38b695e6693937462acaad6172a9251 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 25 21:40:05 2012 +0200 + + EogStatusBar: Reduce bottom margin of embedded progress bar + + This would otherwise cause unnecessary redraws with gtk+ and + gnome-themes-standard due to the image area resizing. + + src/eog-statusbar.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit df5b2b69fe70ef48882210c9948f9eaca19415c7 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jun 7 13:22:20 2012 +0200 + + Make EogWindow a GtkApplicationWindow + + This is necessary to support application menus. + + src/eog-window.c | 4 +++- + src/eog-window.h | 4 ++-- + 2 files changed, 5 insertions(+), 3 deletions(-) + +commit 888b5ed2f6d0fa89d52fad68ddcf14fbca134932 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 23 17:12:54 2012 +0200 + + EogThumbView: Set icon view columns to the real number of images + + GtkIconView's layout code was redone in gtk+-3.4.3 and 3.4.4 + breaking EogThumbView which would scale the thumbnails so small that + the thumbview would not be shown itself in single row mode. + This should work with gtk+-3.4.2 and earlier as well. + + https://bugzilla.gnome.org/show_bug.cgi?id=677168 + + src/eog-thumb-nav.c | 10 ++++-- + src/eog-thumb-view.c | 91 +++++++++++++++++++++++++++++++++++++++++++++++++++- + 2 files changed, 98 insertions(+), 3 deletions(-) + +commit 926c759772a9060ae72cedfb01468f4bd1a0246f +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 16 19:28:20 2012 +0200 + + EogThumbView: Implement GtkOrientable + + src/eog-thumb-view.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 56 insertions(+), 1 deletion(-) + +commit 9015c3d76da2d7e636567429f174ee3faccaf480 +Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> +Date: Sun Jun 24 00:33:36 2012 +0900 + + [l10n] Update Japanese translation + + po/ja.po | 514 +++++++++++++++++++++++++-------------------------------------- + 1 file changed, 205 insertions(+), 309 deletions(-) + +commit d4adc0f97c0e58ec9bce461e9e52c399b7e0e07c +Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> +Date: Fri Jun 22 09:31:22 2012 +0200 + + Updated Slovenian translation + + po/sl.po | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit c9ca0669bb638d754cc93d5818be7ca261842521 +Author: Aleksej Kabanov <ak099@mail.ru> +Date: Sun Jun 17 20:56:38 2012 +0400 + + Updated Russian translation + + po/ru.po | 583 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 341 insertions(+), 242 deletions(-) + +commit 4761ae0cf0411fb539b191efa61c4cdfabc5992e +Author: Nilamdyuti Goswami <nilamdyuti@gmail.com> +Date: Wed Jun 13 21:14:37 2012 +0530 + + Assamese translation reviewed + + po/as.po | 417 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 205 insertions(+), 212 deletions(-) + +commit 5dbf8a8b2b94ebaa42b45e5e2b763ebae1a31342 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Tue Jun 12 17:54:41 2012 +0200 + + Updated Arabic translation + + po/ar.po | 283 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 146 insertions(+), 137 deletions(-) + +commit b52d2c1c6569d4c9106ebb4dc7218c9e1981baa9 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 10 15:34:26 2012 +0200 + + EogWindow: Make sure the window is realized after loading an image + + Otherwise it could happen that no window is shown if the fist image + doesn't correctly emit its size-prepared signal correctly. + + https://bugzilla.gnome.org/show_bug.cgi?id=669830 + + src/eog-window.c | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +commit 3fb558e1861d3d75bca23946fcf3f62c80daeeec +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jun 8 18:40:20 2012 +0200 + + EogScrollView: Clip SVGs to the visible image area + + This avoids showing image data present in those images but outside + of the defined image boundaries. That could make the UI look like + it is misbehaving (e.g. not showing scrollbars). + + https://bugzilla.gnome.org/show_bug.cgi?id=676486 + + src/eog-scroll-view.c | 9 +++++++-- + 1 file changed, 7 insertions(+), 2 deletions(-) + +commit aebffb6f59844294ef49e94d784071f24900bcbb +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jun 7 13:33:26 2012 +0200 + + EogWindow: Make check for initialized a check for not initializing + + This allows reusing existing empty windows which got broken in + in the fix for bug 677200 (commit 92c37ff). + + src/eog-application.c | 3 ++- + src/eog-window.c | 4 ++-- + src/eog-window.h | 2 +- + 3 files changed, 5 insertions(+), 4 deletions(-) + +commit 92c37ff6b34a2866ba2d03be7f6e1e973c707419 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 4 21:55:29 2012 +0200 + + Make sure to only reuse an empty window if it is done initializing + + This avoids a race condition when opening images through multiple instances. + The second instance could then override the already loading (hidden) + window's image resulting in only one image window showing. + + https://bugzilla.gnome.org/show_bug.cgi?id=677200 + + src/eog-application.c | 3 ++- + src/eog-window.c | 8 ++++++++ + src/eog-window.h | 1 + + 3 files changed, 11 insertions(+), 1 deletion(-) + +commit 11f05ec911b4208faa8f00ecd9f4830ca39fcb25 +Author: Tom Gall <tom.gall@linaro.org> +Date: Sun Jun 3 14:26:31 2012 +0200 + + Fix saving transformed JPEG images that don't transform perfectly + + This could lead to a crash or break saving of these files with a + message about the image exceeding the maximum image dimensions for saving. + + https://bugzilla.gnome.org/show_bug.cgi?id=675569 + + src/eog-image-jpeg.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit f8788a73cef17db329a59a08d628c52f2fb868d4 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu May 31 13:14:20 2012 +0200 + + Updated Spanish translation + + po/es.po | 8 +++----- + 1 file changed, 3 insertions(+), 5 deletions(-) + +commit 05aa696fbad1e9e60acf2cc29136b4215054174f +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Wed May 23 23:21:31 2012 +0200 + + Updated French translation + + po/fr.po | 303 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 152 insertions(+), 151 deletions(-) + +commit b7c68b1ffe2ebcc81d6daa947d8ee94ad4e7e2c5 +Author: Antoine Jacoutot <ajacoutot@gnome.org> +Date: Mon May 21 08:08:18 2012 +0200 + + build: OpenBSD needs _XOPEN_SOURCE_EXTENDED for strptime(3) + + strptime(3) was introduced in XPG4. On OpenBSD, just defining + _XOPEN_SOURCE gets you the older XPG3 wich doesn't include strptime(3), + so we need to define _XOPEN_SOURCE_EXTENDED to get XPG4v2. + + src/eog-exif-util.c | 1 + + 1 file changed, 1 insertion(+) + +commit 3c11be7ab2560450e4ba4704b6b196f374f49f49 +Author: Christian Kirbach <Christian.Kirbach@googlemail.com> +Date: Wed May 23 00:03:47 2012 +0200 + + Updated German help translation + + help/de/de.po | 302 +++++++++++++++++++++++++++++++++++++++++++++++++++------- + 1 file changed, 266 insertions(+), 36 deletions(-) + +commit ea8c106712e5c37fb7dd4510c3fed84b22ce911e +Author: Rūdolfs Mazurs <rudolfsm@src.gnome.org> +Date: Fri May 18 17:55:14 2012 +0300 + + Updated Latvian translation + + po/lv.po | 472 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 245 insertions(+), 227 deletions(-) + +commit 710597f9f25cab797793dc1e6689e60474476d97 +Author: Tom Tryfonidis <tomtryf@gmail.com> +Date: Wed May 2 13:03:15 2012 +0300 + + Updated Greek translation + + po/el.po | 846 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 430 insertions(+), 416 deletions(-) + +commit 232a5dd4b435af5173d8003621c3f0bed96dfc74 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 30 23:34:40 2012 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit da2442ab5bd8767b534c4710009abed0dc3ca9c3 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 30 23:27:56 2012 +0200 + + Prepare for release 3.5.1 + + NEWS | 38 ++++++++++++++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 39 insertions(+), 1 deletion(-) + +commit 5aebb88a206f1d6dfab87fbe9a63c6cc54bf37e9 +Author: Javier Sánchez <jsanchez@deskblue.com> +Date: Sun Apr 29 11:41:06 2012 +0200 + + Printing paper orientation should default based on image dimensions + + Now, the default paper orientation in print settings is based on image + dimensions. + + https://bugzilla.gnome.org/show_bug.cgi?id=531898 + + src/eog-print.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +commit a0a7bdacdb33352fb2c79f756696dd696ce1f358 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sat Apr 21 13:01:14 2012 +0200 + + Updated Slovenian translation + + po/sl.po | 324 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 165 insertions(+), 159 deletions(-) + +commit 38e8c3a7b1205726474e39f2ff00a3258ec585f4 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Thu Apr 19 19:26:30 2012 +0200 + + Updated Galician translations + + po/gl.po | 264 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 134 insertions(+), 130 deletions(-) + +commit 874920955b1ed47fc5d808f4538e49a7c9e27563 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Wed Apr 18 20:04:38 2012 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 40 ++++++++++++++++++++-------------------- + 1 file changed, 20 insertions(+), 20 deletions(-) + +commit 0d60cd10abe7241a435feb00e82e91f1f70cd067 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Apr 16 23:39:40 2012 +0200 + + Post-branch version bump + + A little bit late, but make it clear that this is a development branch. + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 8c35097d0c85b2df2e679d078eafe9e40d92e7e4 +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Fri Apr 13 21:36:25 2012 +0200 + + Updated French doc translation + + help/fr/fr.po | 301 ++++++++++++++++++++++++++++++++++++++++++++++++++-------- + 1 file changed, 263 insertions(+), 38 deletions(-) + +commit 257fe2f1d9b3ca582da74e9a843314f8cd538740 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Fri Apr 13 01:00:32 2012 +0300 + + Updated Hebrew translation. + + po/he.po | 317 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 161 insertions(+), 156 deletions(-) + +commit 7029dfe154cf8d1ce4df8fd6f3157b344e0ad9b7 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Apr 11 21:15:39 2012 +0200 + + Avoid recompressing JPEGs as PNG when printing + + Use cairo's feature to simply attach the source file data to + the printing surface. This reduces the file size of the resulting + PDF file pretty much to the source file size. + + https://bugzilla.gnome.org/show_bug.cgi?id=394260 + + src/eog-image.c | 18 +++++++- + src/eog-image.h | 6 ++- + src/eog-print.c | 138 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 160 insertions(+), 2 deletions(-) + +commit d6b9b7d94db142d84d1074ceebe4a40411a60765 +Author: Carles Ferrando <carles.ferrando@gmail.com> +Date: Tue Apr 10 23:50:22 2012 +0200 + + [l10n]Updated Catalan (Valencian) translation + + po/ca@valencia.po | 43 ++++++++++++++++++++++++------------------- + 1 file changed, 24 insertions(+), 19 deletions(-) + +commit a365dfb744c412dc4dbefd206a6ce4e4995aab59 +Author: Jordi Serratosa <jordis@softcatala.cat> +Date: Tue Apr 10 23:50:04 2012 +0200 + + [l10n] Fixes on Catalan translation + + po/ca.po | 32 +++++++++++++++++--------------- + 1 file changed, 17 insertions(+), 15 deletions(-) + +commit 99deea8dc96bc8d50453b94fcd7b82b9faa0cb21 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Tue Apr 10 23:30:08 2012 +0200 + + Updated Galician translations for doc + + Signed-off-by: Fran Diéguez <fran.dieguez@mabishu.com> + + help/gl/gl.po | 349 ++++++++++++++++++++++++++++++++++++++++++++++++++-------- + 1 file changed, 301 insertions(+), 48 deletions(-) + +commit 7686a7b0608d10005a21493672dd7039adfc77d8 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Tue Apr 10 22:59:20 2012 +0200 + + Updated Hungarian translation + + help/hu/hu.po | 395 +++++++++++++++++++++++++++++++++++++++++++--------------- + 1 file changed, 295 insertions(+), 100 deletions(-) + +commit 87fe5b97653285973c88b0efb806f18ca648291a +Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> +Date: Mon Apr 9 12:15:24 2012 +0200 + + Updated Slovenian translation + + help/sl/sl.po | 175 +++++++++++++++++++++++++++++++++++++++++++++++++++------- + 1 file changed, 155 insertions(+), 20 deletions(-) + +commit 6402b286dda779f280d941be56c2e17f2baa127d +Author: Praveen Illa <mail2ipn@gmail.com> +Date: Mon Apr 9 01:24:17 2012 +0530 + + Updated Telugu Translation + + po/te.po | 34 +++++++++++++++++++--------------- + 1 file changed, 19 insertions(+), 15 deletions(-) + +commit 1e138be45f5c60ec92fe21e3749139f540cd1acd +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sun Apr 8 13:22:22 2012 +0200 + + Updated Spanish translation + + po/es.po | 296 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 151 insertions(+), 145 deletions(-) + +commit a8c7091fae2075adf0a8d66017736c52832d1126 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Apr 6 19:22:03 2012 +0200 + + Replace slideshow timeout spinbutton with a scale + + This should make it easier for translators to handle this UI part + as the time unit is decoupled from the description. + + https://bugzilla.gnome.org/show_bug.cgi?id=658127 + + data/eog-preferences-dialog.ui | 43 +++++++++++++++++++----------------------- + src/eog-preferences-dialog.c | 22 ++++++++++++++++++--- + 2 files changed, 38 insertions(+), 27 deletions(-) + +commit 0815e9eb2232fc8734622d2254d64774aadecd62 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Apr 6 17:49:43 2012 +0200 + + fullscreen: Check if clicks originated from over the image + + This avoids going fullscreen by clicking the scrollbars. + + https://bugzilla.gnome.org/show_bug.cgi?id=579595 + + plugins/fullscreen/eog-fullscreen-plugin.c | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +commit 5fcbe0c8d1048c233de70b75724a6eb427c2d55c +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Apr 6 17:45:15 2012 +0200 + + EogScrollView: Add function to check if an event's source if over the image + + Useful to check if click events are over the image itself. + + doc/reference/eog-sections.txt | 1 + + src/eog-scroll-view.c | 106 +++++++++++++++++++++++++++++++++++------ + src/eog-scroll-view.h | 3 ++ + 3 files changed, 95 insertions(+), 15 deletions(-) + +commit 25050d3b5cfcb901c5245a967b1435b235cc8bbe +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sun Apr 1 19:36:10 2012 +0200 + + Updated Spanish translation + + help/es/es.po | 6734 +++++++++++++++++++++++++++++---------------------------- + 1 file changed, 3481 insertions(+), 3253 deletions(-) + +commit 791607cfc9c746dd1d8c52497bffd24627bdda42 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Sun Apr 1 17:07:50 2012 +0200 + + Review Arabic translation + + po/ar.po | 69 +++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 42 insertions(+), 27 deletions(-) + +commit 719dfa22cebaa1d1f8d73b76497fe3d58315b387 +Author: Andika Triwidada <andika@gmail.com> +Date: Sat Mar 31 23:46:01 2012 +0700 + + [l10n] Updated Indonesian translation + + po/id.po | 1176 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 615 insertions(+), 561 deletions(-) + +commit c6746fff19d5430fbe94bda73215f9b5723cb512 +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Sat Mar 31 12:08:46 2012 -0400 + + help docs: added get-involved pages and license info. + + Also updated the makefile and added copyright to index.page + + help/C/develop.page | 27 ++++++++++++++++++++++ + help/C/documentation.page | 30 ++++++++++++++++++++++++ + help/C/index.page | 3 ++- + help/C/license.page | 59 +++++++++++++++++++++++++++++++++++++++++++++++ + help/C/translate.page | 39 +++++++++++++++++++++++++++++++ + help/Makefile.am | 4 ++++ + 6 files changed, 161 insertions(+), 1 deletion(-) + +commit 415c249e30e0da9580740ae4f0e66d3cb5eb225f +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Tue Mar 27 23:31:10 2012 +0200 + + [l10n] Updated German doc translation + + help/de/de.po | 675 ++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 354 insertions(+), 321 deletions(-) + +commit 9457577bf9b019a58a40938b7e6ca0c75356a41d +Author: Carles Ferrando <carles.ferrando@gmail.com> +Date: Tue Mar 27 22:30:10 2012 +0200 + + [l10n]Updated Catalan (Valencian) translation + + po/ca@valencia.po | 1270 +++++++++++++++++++++++++++-------------------------- + 1 file changed, 655 insertions(+), 615 deletions(-) + +commit 08dbe0ca30f42146aff2849770264819175489d6 +Author: Yasumichi Akahoshi <yasumichi@vinelinux.org> +Date: Tue Mar 27 23:50:23 2012 +0900 + + [l10n] Update Japanese translation + + help/ja/ja.po | 103 +++++++++++++++++++++++++++++++++++++++++----------------- + 1 file changed, 74 insertions(+), 29 deletions(-) + +commit dc8dfef361e4c8797e3ac0a8aee075fb264eef54 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Tue Mar 27 12:00:56 2012 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 707 ++++++++++++++++++++++++++++++++---------------------------- + po/zh_TW.po | 701 +++++++++++++++++++++++++++++++---------------------------- + 2 files changed, 747 insertions(+), 661 deletions(-) + +commit b2ece774230591fcadfdbb06097e0b71ea42e404 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 26 22:24:39 2012 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 908c654abf8a0b2226672ec26ced3ec142ccef2f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 26 22:16:57 2012 +0200 + + Prepare for release 3.4.0 + + NEWS | 17 +++++++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 19 insertions(+), 2 deletions(-) + +commit d16d39435a0766cb28f609b91b09869680ab0093 +Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> +Date: Mon Mar 26 14:07:00 2012 +0200 + + Updated Slovenian translation + + help/sl/sl.po | 63 ++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 39 insertions(+), 24 deletions(-) + +commit 0e3b8c4fc0bb86df0e5e1dc9694d338eef76078b +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Mon Mar 26 12:29:24 2012 +0200 + + Updated French doc translation + + help/fr/fr.po | 57 +++++++++++++++++++++++++++------------------------------ + 1 file changed, 27 insertions(+), 30 deletions(-) + +commit 193b2cdfbfd137bcbec86a7085060aecd41b86f1 +Author: Sasi Bhushan <sasi@swecha.net> +Date: Sun Mar 25 17:04:45 2012 +0530 + + Added Telugu help Translations + + help/Makefile.am | 2 +- + help/te/te.po | 2080 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 2081 insertions(+), 1 deletion(-) + +commit 0af23f4a7a67a3c09924f2036bd4019c008e5a24 +Author: Jiro Matsuzawa <jmatsuzawa@src.gnome.org> +Date: Sun Mar 25 14:31:48 2012 +0900 + + [l10n] Update Japanese translation + + po/ja.po | 288 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 147 insertions(+), 141 deletions(-) + +commit 0aded71049366f18a611aeccbb4be19412d66d3d +Author: Praveen Illa <mail2ipn@gmail.com> +Date: Fri Mar 23 15:30:05 2012 +0530 + + Updated Telugu Translation + + po/te.po | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +commit f505a34fb12c920cf0452bcd84b29657808449ad +Author: Praveen Illa <mail2ipn@gmail.com> +Date: Fri Mar 23 15:26:51 2012 +0530 + + Updated Telugu Translation + + po/te.po | 492 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 246 insertions(+), 246 deletions(-) + +commit a152672b6d7a83f35505d438d5a7bb362e760cf0 +Author: Praveen Arimbrathodiyil <pravi.a@gmail.com> +Date: Thu Mar 22 20:51:45 2012 +0530 + + Malayalam translation updated + + po/ml.po | 1485 +++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 792 insertions(+), 693 deletions(-) + +commit e5c27629fdfb624ded860d5e7a2af9fa311887d4 +Author: Kenneth Nielsen <k.nielsen81@gmail.com> +Date: Thu Mar 22 15:41:40 2012 +0100 + + Updated Danish translation + + po/da.po | 879 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 442 insertions(+), 437 deletions(-) + +commit 82b0f16b391a70d7825aa8500a7d2df0af6bffca +Author: Olav Vitters <olav@vitters.nl> +Date: Wed Mar 21 22:08:38 2012 +0100 + + fix typo; double a + + po/te.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b7453f99aa129334ced44b4b7059da3645c779e1 +Author: Olav Vitters <olav@vitters.nl> +Date: Wed Mar 21 22:05:48 2012 +0100 + + fix keywords in te.po + + po/te.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 568722ad7a9917a2eb9c2b44ceeb556ce5fe6917 +Author: Krishnababu Krothapalli <email> +Date: Tue Mar 20 21:37:05 2012 +0530 + + Translations Updated with FUEL + + po/te.po | 214 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 107 insertions(+), 107 deletions(-) + +commit c7b8ba2fe93865153edbb1b1117ddb3b50c4c3d5 +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Mon Mar 19 23:27:28 2012 +0200 + + Updated Lithuanian translation + + po/lt.po | 1300 +++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 602 insertions(+), 698 deletions(-) + +commit 4324167b3ef2600a91cc94fcbbde1c5b8da5465f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 19 22:04:02 2012 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0288806234332b4e384cb872983f3a5e8bd5eeb3 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 19 21:56:44 2012 +0100 + + Prepare for release 3.3.92 + + NEWS | 42 ++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 42 insertions(+) + +commit 706797b92423a7b3a138985060d2fcecf1ae61bd +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Mar 18 18:59:35 2012 +0100 + + Revert "Do not show the titlebar when eog is maximized." + + This reverts commit c93aa0b94ba6142c78ea5025a56a0f70c6fc0739. + As the menubar comes pretty close to the top of the screen, + there is apperently the possibility to accidentially trigger + gnome-shell's activities menu. Revisit this for the next development + cycle when all the dependencies are stable enough. + + https://bugzilla.gnome.org/show_bug.cgi?id=671643 + + src/eog-window.c | 2 -- + 1 file changed, 2 deletions(-) + +commit b7c5c81df14c1cfe1644228758b1f894cf1253b1 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Mar 18 18:43:01 2012 +0100 + + Add gtk version check around changes of commit 22618a75 + + We use symbols that are not present in earlier GTK+ versions. + + src/eog-thumb-nav.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit 22618a75bcf2a754f5fbe48b2d49c27b5e66ecd5 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Mar 18 18:28:57 2012 +0100 + + EogThumbNav: Fix mousewheel scrolling with gtk-3.3.18 and xserver-1.12 + + Handle incoming smooth scroll events that are oviously caused by + the scrollwheel just like legacy scroll events. + + https://bugzilla.gnome.org/show_bug.cgi?id=672312 + + src/eog-thumb-nav.c | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +commit cd5996d8f70aa1982f1dba54d4acea6dded05c48 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Sun Mar 18 18:31:31 2012 +0100 + + [l10n] Updated Italian translation + + po/it.po | 720 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 383 insertions(+), 337 deletions(-) + +commit f05db86aa7cb23cb8c5776011e7463ab03589eff +Author: Abderrahim Kitouni <a.kitouni@gmail.com> +Date: Sun Mar 18 15:58:35 2012 +0100 + + Updated Arabic translation + + po/ar.po | 1246 +++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 670 insertions(+), 576 deletions(-) + +commit 32a85fb24ea22a3e044c6738e18381561167797c +Author: Duarte Loreto <happyguy_pt@hotmail.com> +Date: Sun Mar 18 00:00:34 2012 +0000 + + Updated Portuguese translation + + po/pt.po | 1265 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 652 insertions(+), 613 deletions(-) + +commit 5d9278bede301b211f61b306bfc31003fc2dcfb6 +Author: Viesturs Ružāns <viesty@exs.lv> +Date: Sat Mar 17 12:24:53 2012 +0200 + + Added Latvian translation. + + help/Makefile.am | 2 +- + help/lv/lv.po | 2589 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 2590 insertions(+), 1 deletion(-) + +commit c694a415ca39552d4af686a82ab6274a2b914ffa +Author: Muhammet Kara <muhammet.k@gmail.com> +Date: Sat Mar 17 09:33:03 2012 +0200 + + [l10n]Updated Turkish translation + + po/tr.po | 970 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 488 insertions(+), 482 deletions(-) + +commit fd5818b617f4d94266cad6f0fc6125fe5cd0b395 +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Fri Mar 16 23:01:41 2012 +0100 + + Updated Dutch translation + + po/nl.po | 928 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 467 insertions(+), 461 deletions(-) + +commit fb2ed49206b0c94bc496dfcfd169b2d25bfc0b4e +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Mar 16 17:08:59 2012 +0100 + + Updated Spanish translation + + help/es/es.po | 6525 ++++++++++++++++++++++++++++----------------------------- + 1 file changed, 3254 insertions(+), 3271 deletions(-) + +commit d91ef4d68696c6ce4d5b8e4342ba8e5d89ed02b4 +Author: Bruce Cowan <bruce@bcowan.me.uk> +Date: Fri Mar 16 13:49:14 2012 +0000 + + Updated British English translation + + po/en_GB.po | 1253 ++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 646 insertions(+), 607 deletions(-) + +commit bdbe0969dea2b4893341723c3373e8944b09af98 +Author: A S Alam <aalam@users.sf.net> +Date: Thu Mar 15 20:48:04 2012 +0530 + + update Punjabi Translation + + po/pa.po | 3049 ++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 1364 insertions(+), 1685 deletions(-) + +commit b380f1066b1ca17c08d80b90a6f24b702fe9eb66 +Author: Marek Černocký <marek@manet.cz> +Date: Thu Mar 15 14:41:43 2012 +0100 + + Updated Czech translation + + po/cs.po | 932 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 469 insertions(+), 463 deletions(-) + +commit d921fc73d49814fd475e197cbb97e5aefe2d717d +Author: Sweta Kothari <swkothar@redhat.com> +Date: Thu Mar 15 14:55:44 2012 +0530 + + Updated Gujarati Translations + + po/gu.po | 1302 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 664 insertions(+), 638 deletions(-) + +commit 2301d0d0221b928fa1c644c1754977dabb6ed88d +Author: Krishnababu Krothapalli <email> +Date: Thu Mar 15 12:04:40 2012 +0530 + + Updated Telugu Translations + + po/te.po | 32 ++++++++++++++++++-------------- + 1 file changed, 18 insertions(+), 14 deletions(-) + +commit d759c24318df3f50a3617965c48891f568a62a17 +Author: A S Alam <aalam@users.sf.net> +Date: Thu Mar 15 06:21:22 2012 +0530 + + update Punjabi Translation + + po/pa.po | 2923 +++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 1639 insertions(+), 1284 deletions(-) + +commit 20af573d9c30808d5f5a27d997c00a97c604c272 +Author: Anita Reitere <nitalynx@gmail.com> +Date: Wed Mar 14 21:58:00 2012 +0200 + + Updated Latvian translation. + + po/lv.po | 1310 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 669 insertions(+), 641 deletions(-) + +commit 57116d58a1bc7447bd02991ae7902d06a239dbed +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Mar 14 20:35:50 2012 +0100 + + EogFileChooser: Use GnomeThumbnailFactory to create preview image + + Do this if no thumbnail exists yet. Avoids displaying too large thumbs + for images that have yet to be thumbnailed, breaking the file open dialog. + + https://bugzilla.gnome.org/show_bug.cgi?id=671944 + + src/eog-file-chooser.c | 37 ++++++++++++++++++++++++++++--------- + 1 file changed, 28 insertions(+), 9 deletions(-) + +commit 089c4d68620b91745f203f8c11969bd7f0536c8c +Author: David Planella <david.planella@gmail.com> +Date: Tue Mar 13 00:18:52 2012 +0100 + + Updated Catalan translation + + po/ca.po | 1260 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 650 insertions(+), 610 deletions(-) + +commit 31a24d3f50f3cc7defa16d54668cf5bf1850dee3 +Author: Antonio Fernandes C. Neto <fernandesn@gnome.org> +Date: Fri Mar 9 12:57:53 2012 -0300 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 902 ++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 454 insertions(+), 448 deletions(-) + +commit ff4fd8ed7656b46205d34359cd37b2502327460c +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Mon Mar 12 18:27:20 2012 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 346 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 176 insertions(+), 170 deletions(-) + +commit 917a8b5fce2202faf5439931af17c3779c4f0e4d +Author: Timo Jyrinki <timo@debian.org> +Date: Mon Mar 12 11:14:23 2012 +0200 + + Finnish translation update from http://l10n.laxstrom.name/wiki/Gnome_3.4 translation sprint + + po/fi.po | 911 +++++++++++++++++++++++---------------------------------------- + 1 file changed, 328 insertions(+), 583 deletions(-) + +commit f9a5ec6522b616421f1f2d5d41f77c3c6ab788bd +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Mar 10 15:14:33 2012 +0100 + + Remove deprecated, unneeded and now effect-less GtkStyle-usage + + This stuff wasn't needed anymore since we dropped the GtkFrame as + parent for the EogScrollView widget. Also it didn't have any effect + at all in GTK+-3. Fixes more build warnings because of deprecations. + + https://bugzilla.gnome.org/show_bug.cgi?id=671402 + + src/eog-window.c | 14 -------------- + 1 file changed, 14 deletions(-) + +commit c87818df0fe3ea5a5783426011925d2e2e752b24 +Author: Adrian Zgorzałek <a.zgorzalek@gmail.com> +Date: Wed Feb 29 22:08:31 2012 +0100 + + Fix GDK deprecations + + Partially fixes compiling with -Werror-deprecated. + + http://bugzilla.gnome.org/show_bug.cgi?id=671402 + + src/eog-scroll-view.c | 9 +++++++-- + 1 file changed, 7 insertions(+), 2 deletions(-) + +commit edb39d51119e6bc4447582d720023f1788421893 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Mar 10 15:11:38 2012 +0100 + + EogErrorMessageArea: Properly escape the error message markup + + Fixes broken error messages when printing messages containing markup + characters like '<' and '>'. + + src/eog-error-message-area.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 7fc2de129fdc3a4f1745bb3bd37903a19b7f2d18 +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sat Mar 10 21:16:43 2012 +0900 + + Updated Korean translation + + po/ko.po | 1240 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 642 insertions(+), 598 deletions(-) + +commit 8a08a42f1a98e19fcb2126d4b6f3937a0a4ef9f8 +Author: Arash Mousavi <amousavi@src.gnome.org> +Date: Sat Mar 10 01:56:19 2012 +0330 + + Updated Persian Translation + + po/fa.po | 1210 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 622 insertions(+), 588 deletions(-) + +commit 1600704f3bbd1e2c2b71c0a881c320cdbd10fc9b +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Fri Mar 9 19:01:37 2012 +0100 + + Updated Esperanto translation + + po/eo.po | 340 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 214 insertions(+), 126 deletions(-) + +commit b408f9e609aaee9f4c0d153b7e0f5bfbeb568e7a +Author: Yuri Myasoedov <omerta13@yandex.ru> +Date: Wed Mar 7 18:25:42 2012 +0400 + + Updated Russian translation + + po/ru.po | 838 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 422 insertions(+), 416 deletions(-) + +commit 76177cd2fd935bae05ed5c16efefa7d27d026a6b +Author: Alexander Shopov <ash@kambanaria.org> +Date: Wed Mar 7 06:41:30 2012 +0200 + + Updated Bulgarian translation + + po/bg.po | 940 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 474 insertions(+), 466 deletions(-) + +commit 738ba417c3d6f78acaf7345b3f3eea8c03bf051b +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Tue Mar 6 22:21:02 2012 +0100 + + Updated French translation + + po/fr.po | 1317 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 680 insertions(+), 637 deletions(-) + +commit 853e129605a6ce471de5388c2055f4a9a41395d5 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 5 21:08:46 2012 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit fdb9e8081ac59f4e720213ef3d223275748771c6 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 5 20:59:49 2012 +0100 + + Prepare for release 3.3.91 + + NEWS | 45 +++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 45 insertions(+) + +commit bd46c58ed587d228f00ef0056faa95dd836727f3 +Author: Nilamdyuti Goswami <nilamdyuti@gmail.com> +Date: Mon Mar 5 20:05:14 2012 +0530 + + Assamese translation completed + + po/as.po | 1313 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 672 insertions(+), 641 deletions(-) + +commit b0fc5acb663f87fcffe5d8d4f4dafbdcfc4d76ed +Author: YunQiang Su <yqsu@src.gnome.org> +Date: Mon Mar 5 17:58:49 2012 +0800 + + update Simplified Chinese (zh_CN) translation + + po/zh_CN.po | 1277 ++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 660 insertions(+), 617 deletions(-) + +commit 807d0a9c6205aaeeb0e31662727b795df6432196 +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Sun Mar 4 22:11:31 2012 +0200 + + Added uk translation + + po/uk.po | 1306 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 674 insertions(+), 632 deletions(-) + +commit 9e26152be8b9b20c79ae6deeeddcc57e4982bffb +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sun Mar 4 20:13:50 2012 +0100 + + Updated Galician translations + + po/gl.po | 346 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 176 insertions(+), 170 deletions(-) + +commit c7549594ed526151c3b22668c0cee74f5937ba7a +Author: Carlos Garcia Campos <carlosgc@gnome.org> +Date: Mon Feb 6 17:08:37 2012 +0000 + + toolbar-editor: Fix a crash when dropping an item to the toolbar + + action_sensitive_cb can be called with the dnd tool item when it doesn't + have an ancestor. + + (Cherry-picked from Evince to eog to fix bug #671202) + https://bugzilla.gnome.org/show_bug.cgi?id=671202 + + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +commit bf0baa922062a9b25efb97043460c04a1335b136 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Sun Mar 4 01:18:04 2012 +0100 + + Updated Hungarian translation + + po/hu.po | 408 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 204 insertions(+), 204 deletions(-) + +commit 691707d41628e9e45dbe5d276c71ca0a988be18c +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Sun Mar 4 01:14:12 2012 +0100 + + Updated Hungarian help translation + + help/hu/hu.po | 568 ++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 289 insertions(+), 279 deletions(-) + +commit 4a9d39f441c9a453c525ed3db755a8edc80e6bdc +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Sun Mar 4 01:05:38 2012 +0100 + + Updated Hungarian translation + + po/hu.po | 669 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 354 insertions(+), 315 deletions(-) + +commit e1125381a779fa4d79ea96fde5de819bc3a0f017 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sat Mar 3 23:57:34 2012 +0100 + + Updated Polish translation + + po/pl.po | 690 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 366 insertions(+), 324 deletions(-) + +commit d58f23ad76cbff3c833733964223b1eec66cbfc8 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Sat Mar 3 18:54:37 2012 +0100 + + Updated Basque language + + po/eu.po | 695 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 369 insertions(+), 326 deletions(-) + +commit 81a72cb88d7c299c1335063a79c49c46c528c7e3 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sat Mar 3 23:31:38 2012 +0700 + + Updated Vietnamese translation + + po/vi.po | 13 ++++++------- + 1 file changed, 6 insertions(+), 7 deletions(-) + +commit c40c947652559c8041cb0a7f953b4f9576bc52fd +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sat Mar 3 23:29:59 2012 +0700 + + po/vi: import from Damned Lies + + po/vi.po | 1290 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 659 insertions(+), 631 deletions(-) + +commit d68944a97880afea3d4ea9904eb5af07eaa0065e +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Mar 2 14:17:46 2012 +0100 + + Updated Spanish translation + + po/es.po | 960 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 483 insertions(+), 477 deletions(-) + +commit 796af3de157bd0476386c806102c374cc5881f54 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Fri Mar 2 14:10:05 2012 +0200 + + Updated Hebrew translation. + + po/he.po | 418 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 212 insertions(+), 206 deletions(-) + +commit 6a83a268414248f3d236cb47830a85810a1375e0 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Fri Mar 2 12:13:44 2012 +0300 + + Updated Belarusian translation. + + po/be.po | 939 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 473 insertions(+), 466 deletions(-) + +commit e961bf85da9f860ffded6f7a4e303e2a5ce13675 +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Thu Mar 1 22:38:47 2012 +0100 + + Updated Serbian translation + + po/sr.po | 942 +++++++++++++++++++++++++++++---------------------------- + po/sr@latin.po | 942 +++++++++++++++++++++++++++++---------------------------- + 2 files changed, 946 insertions(+), 938 deletions(-) + +commit b475d99d1af9c402eb3e4398a38fc599a09ea7eb +Author: Mattias Põldaru <mahfiaz@gmail.com> +Date: Thu Mar 1 17:55:57 2012 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 14 +++++++++----- + 1 file changed, 9 insertions(+), 5 deletions(-) + +commit f366b133c152a7f910842588859b16425e7f6df2 +Author: Daniel Nylander <po@danielnylander.se> +Date: Thu Mar 1 13:41:17 2012 +0100 + + Updated Swedish translation + + po/sv.po | 808 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 407 insertions(+), 401 deletions(-) + +commit 59e675c621cf0e9bb4567321a877ebb3c0075cc4 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 29 22:14:22 2012 +0100 + + Fix some more deprecation warnings + + Still not all though. + + src/eog-scroll-view.c | 2 +- + src/eog-uri-converter.c | 4 ++-- + 2 files changed, 3 insertions(+), 3 deletions(-) + +commit 176ebc22b3e11271cb32b5e458cbc6c7cc3fb113 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 29 21:44:08 2012 +0100 + + Fix warnings due to deprecations in librsvg-2.35 + + src/main.c | 9 +++++++-- + 1 file changed, 7 insertions(+), 2 deletions(-) + +commit 2264f943fcb2619ae27b91f852354d13e9baf801 +Author: Mario Blättermann <mario.blaettermann@gmail.com> +Date: Wed Feb 29 21:51:51 2012 +0100 + + [l10n] Updated German translation + + po/de.po | 349 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 172 insertions(+), 177 deletions(-) + +commit 9bfc7b316206e49466a272c6e510792c18acc0e2 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Wed Feb 29 18:46:39 2012 +0100 + + Updated Slovenian translation + + po/sl.po | 566 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 286 insertions(+), 280 deletions(-) + +commit b9e1aa834cdc79ee162063581fc284bbbabaf07c +Author: Didier Roche <didrocks@ubuntu.com> +Date: Wed Feb 29 18:03:22 2012 +0100 + + Add extra keywords for searching in GNOME Shell and Unity + + This should list eog as result when searching for these keywords + in GNOME Shell and Unity. + + https://bugzilla.gnome.org/show_bug.cgi?id=671038 + + data/eog.desktop.in.in | 2 ++ + 1 file changed, 2 insertions(+) + +commit 81cb0682eae5ab9864737132abb4f0c18b10ff8c +Author: Adrian Zgorzałek <a.zgorzalek@gmail.com> +Date: Tue Feb 28 21:33:40 2012 +0100 + + Remove deprecated GtkVBox/GtkHBox usage + + The GtkHBox and GtkVBox have been deprecated by now. + Also be consistent with the other properties declarations + and use PROP_0 instead of PROP = 1. + + https://bugzilla.gnome.org/show_bug.cgi?id=671008 + + src/eog-print-preview.c | 3 ++- + src/eog-sidebar.c | 5 ++++- + src/eog-sidebar.h | 4 ++-- + src/eog-thumb-nav.c | 8 ++++++-- + src/eog-thumb-nav.h | 4 ++-- + 5 files changed, 16 insertions(+), 8 deletions(-) + +commit d9ac4979739d2558fbaf4346186fcd8a34de7371 +Author: Dr.T.Vasudevan <agnihot3@gmail.com> +Date: Wed Feb 29 17:26:40 2012 +0530 + + updated Tamil translation + + po/ta.po | 681 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 358 insertions(+), 323 deletions(-) + +commit b96480b8794021f178303bd2e1acaedbd1b24e11 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sun Feb 26 20:07:37 2012 +0100 + + Updated Spanish translation + + help/es/es.po | 81 +++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 45 insertions(+), 36 deletions(-) + +commit 38f49dca4785b2e1a36c9c1fe6ba7d9c84f022a0 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 26 15:51:23 2012 +0100 + + EogExifDetails: Take Exif IFD into account when creating hash keys + + This should solve conflicts with Exif values that have the same number + but are stored in different IFD blocks (e.g GPS and Interoperability). + + https://bugzilla.gnome.org/show_bug.cgi?id=670700 + + src/eog-exif-details.c | 13 +++++++++++-- + 1 file changed, 11 insertions(+), 2 deletions(-) + +commit db599c9fddc08c28559d1ff07e9510c3b89a2741 +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Sat Feb 25 03:19:23 2012 +0100 + + help: fixed some inconsistencies. + + https://bugzilla.gnome.org/show_bug.cgi?id=670245 + + help/C/format-change.page | 68 ++++++++++++++++++++--------------------- + help/C/plugin-exif-digital.page | 48 ++++++++++++++--------------- + 2 files changed, 58 insertions(+), 58 deletions(-) + +commit ead72440ebec2c247ebefe44aeb97175320b47b9 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sat Feb 25 17:18:22 2012 +0100 + + Updated galician translations for doc + + Signed-off-by: Fran Diéguez <fran.dieguez@mabishu.com> + + help/gl/gl.po | 284 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 283 insertions(+), 1 deletion(-) + +commit 4cc4a9d603e4bdf8a9b7349aba8810f4b8720d0a +Author: Kristjan SCHMIDT <kristjan.schmidt@googlemail.com> +Date: Wed Feb 22 19:58:06 2012 +0100 + + Updated Esperanto translation + + po/eo.po | 1290 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 645 insertions(+), 645 deletions(-) + +commit 06e7a1dc41212e3bc042f42d513c891fcadfe244 +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Tue Feb 21 20:15:23 2012 +0100 + + help C: s/floatright/floatend and floatleft/floatstart + + This makes it better for right to left languages. + + help/C/plugin-exif-digital.page | 2 +- + help/C/plugin-fullscreen-double-click.page | 2 +- + help/C/plugin-postr.page | 2 +- + help/C/plugin-send-by-mail.page | 2 +- + help/C/preferences.page | 8 ++++---- + 5 files changed, 8 insertions(+), 8 deletions(-) + +commit 50d81cf7e12dfe915b14212ada9ac2d3dbb55fa6 +Author: Kenneth Nielsen <k.nielsen81@gmail.com> +Date: Mon Feb 20 22:56:46 2012 +0100 + + Updated Danish translation + + po/da.po | 684 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 361 insertions(+), 323 deletions(-) + +commit 6acb51a7a58556e48a11ea821b0809b06f0f3164 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 20 21:16:09 2012 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ddc1c7b5df0ce4f488f0ffe52dc68f9ba877090f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 20 21:08:35 2012 +0100 + + Preapare for release 3.3.90 + + NEWS | 26 +++++++++++++++++++++++++- + 1 file changed, 25 insertions(+), 1 deletion(-) + +commit 9bd1a0720cb42486b87f0802a41346326af7bed6 +Author: Robert Ancell <robert.ancell@canonical.com> +Date: Thu Feb 16 16:36:34 2012 +1100 + + Fix deprecated GTK API usage + + https://bugzilla.gnome.org/show_bug.cgi?id=670184 + + src/eog-print-image-setup.c | 2 +- + src/eog-scroll-view.c | 6 +++--- + src/eog-sidebar.c | 2 +- + 3 files changed, 5 insertions(+), 5 deletions(-) + +commit 7f2f92bfbdb1559008ba15116c7a8309de0b8ad8 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 19 14:24:32 2012 +0100 + + Move clearing of mutexes from dispose into finalize handlers + + We cannot guard the new-style GMutexes against repeated clearing in + dispose handlers. So move them into finalize handlers to prevent that + scenario (which causes double frees) from happening. + + src/eog-image.c | 13 +++++++++++++ + src/eog-list-store.c | 11 ++++++++++- + 2 files changed, 23 insertions(+), 1 deletion(-) + +commit b5f61d90d0478378cf7cf21bf5ade9eded0ae9f2 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Feb 19 14:13:40 2012 +0100 + + Use new GLib threading API + + https://bugzilla.gnome.org/show_bug.cgi?id=670185 + + src/eog-image-private.h | 2 +- + src/eog-image.c | 39 ++++++++++++++++++--------------------- + src/eog-jobs.c | 8 +++++--- + src/eog-list-store.c | 14 +++++++------- + 4 files changed, 31 insertions(+), 32 deletions(-) + +commit 52d44a8a62f9ebb19e32014a6fb4f32089c20981 +Author: Praveen Illa <mail2ipn@gmail.com> +Date: Sat Feb 18 23:26:22 2012 +0530 + + Updated Telugu Translation + + po/te.po | 1308 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 648 insertions(+), 660 deletions(-) + +commit 9ef7d86bbb347eac4b5ba7eb14035dcb986a1c0c +Author: Robert Ancell <robert.ancell@canonical.com> +Date: Thu Feb 16 16:31:05 2012 +1100 + + Remove unused variables + + src/eog-print-preview.c | 4 ---- + src/eog-window.c | 3 --- + 2 files changed, 7 deletions(-) + +commit b06f858159befe2d764c21c2f871208c39268af5 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Feb 16 12:14:10 2012 +0100 + + EogPrintPreview: Avoid unnecessary color parsing + + The RGB values of black and white are known and thus can be set directly + without parsing them with GdkRGBA first. + + src/eog-print-preview.c | 7 ++----- + 1 file changed, 2 insertions(+), 5 deletions(-) + +commit 57ce24e1ed32bf9af1b39592179e84b607600aad +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 15 16:13:23 2012 +0100 + + Mark several private functions as internal + + src/eog-error-message-area.h | 3 +++ + src/eog-metadata-sidebar.h | 2 ++ + src/eog-plugin-engine.h | 2 ++ + src/eog-print-image-setup.h | 1 + + 4 files changed, 8 insertions(+) + +commit 076cb1b19e5c00203b3475bf6e79f42ff3aa6ba4 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 15 15:14:48 2012 +0100 + + EogPrintPreview: Draw focus rectangle around image and not the page + + Besides making the focus rectangle slightly visible again it also makes + more sense this way as the user is interacting with the image on the + page and not the whole page itself. + + src/eog-print-preview.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 16f37f2ee7d20e47a7fc88793a4afd0f1bde2c3e +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 15 15:10:36 2012 +0100 + + EogPrintPreview: Replace deprecated Gdk function calls + + src/eog-print-preview.c | 19 ++++++++++--------- + 1 file changed, 10 insertions(+), 9 deletions(-) + +commit d82064ed11afe1dc6c5d1ee62170ed054a07a39b +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 15 14:35:11 2012 +0100 + + MetadataSidebar: Add a tooltip to the folder button + + src/eog-metadata-sidebar.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit 00aad0826bb7cba95f0376732a4e19b150f058a0 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 15 14:25:23 2012 +0100 + + MetadataSidebar: Change layout of the data values + + Move the value labels in their own line below their key labels. + That improves the visibility of the values and takes away less + horizontal space for image viewing. Unfortunately scrolling could be + necessary now as the vertical space requirement increased. + + src/eog-metadata-sidebar.c | 32 ++++++++++++++++++++++---------- + 1 file changed, 22 insertions(+), 10 deletions(-) + +commit b6b0641a98f9f0f39717126036498d747bc18845 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Feb 14 22:06:21 2012 +0100 + + Make metadata values in MetadataSidebar selectable + + src/eog-metadata-sidebar.c | 1 + + 1 file changed, 1 insertion(+) + +commit d3899a2c956d3c49c559377fda219b0749fb3a3a +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Sun Feb 12 12:36:34 2012 +0100 + + Updated French doc translation + + help/fr/fr.po | 51 +++++++++++++++++++++++++++++++-------------------- + 1 file changed, 31 insertions(+), 20 deletions(-) + +commit ed49527d92d372dbc18d8beba7e07ab857bf1ab4 +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Thu Feb 9 21:10:59 2012 +0100 + + Updated Serbian translation + + po/sr.po | 677 ++++++++++++++++++++++++++++++--------------------------- + po/sr@latin.po | 677 ++++++++++++++++++++++++++++++--------------------------- + 2 files changed, 710 insertions(+), 644 deletions(-) + +commit be54b454c35c9da9e346690876f03f2e41cf14a0 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 8 20:45:10 2012 +0100 + + Fix system plugins data dir path + + eog-plugins was changed to move the plugin's data files out of the + library path. Pass the correct path to libpeas as well, so + system-wide plugins can query this path dynamically from the engine. + + src/eog-plugin-engine.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit f974f23f9a4827a2d8e2f119df7ffc43ead81300 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 8 20:29:58 2012 +0100 + + job-queue: Update to new GThread API introduced with glib-2.31 + + src/eog-job-queue.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit bc4e5b657a127649470c3ece9d893e9ca5105516 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 8 17:42:59 2012 +0100 + + job-queue: Use static GMutex and GCond structs + + Newest glib allows to use GMutex and GCond statically. + This makes use of this in an obvious place. + + src/eog-job-queue.c | 23 ++++++++++------------- + 1 file changed, 10 insertions(+), 13 deletions(-) + +commit 9edf86217f5e2d2ff028146e62a6636a82be4207 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 8 16:37:44 2012 +0100 + + Remove usage of g_thread_init + + g_thread_init() has become obsolete with the current glib releases. + This clears eog from the direct dependency on libgthread. + + configure.ac | 1 - + src/eog-job-queue.c | 2 -- + src/main.c | 3 --- + 3 files changed, 6 deletions(-) + +commit 2eb3f32061d19af97e38d87044d273fd00b03d65 +Author: Jiro Matsuzawa <jmatsuzawa@src.gnome.org> +Date: Thu Feb 9 00:39:13 2012 +0900 + + [l10n] Update Japanese translation + + po/ja.po | 1269 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 648 insertions(+), 621 deletions(-) + +commit 06a2dd6e9ba8b69242685f85db1d8a9a895815a3 +Author: Mattias Põldaru <mahfiaz@gmail.com> +Date: Wed Feb 8 11:06:54 2012 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 752 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 380 insertions(+), 372 deletions(-) + +commit c5b994e949f3017947c239930033957d4f3f17ae +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 6 23:33:18 2012 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 4b5c7eeddc982c3019afe99153ab993d32900336 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 6 23:28:00 2012 +0100 + + Prepare for release 3.3.5 + + NEWS | 30 ++++++++++++++++++++++++++++++ + 1 file changed, 30 insertions(+) + +commit af78446ab5ffb023f3caf2977be0aa2260d31ea0 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Mon Feb 6 23:05:15 2012 +0100 + + Updated Galician doc translations + + help/gl/gl.po | 466 +++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 318 insertions(+), 148 deletions(-) + +commit e2125c36cb5d27b7ad1b9a55943df2522c9fdcde +Author: Fábio Nogueira <fnogueira@gnome.org> +Date: Sun Feb 5 21:25:24 2012 -0200 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 684 ++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 361 insertions(+), 323 deletions(-) + +commit d884606a7524138bd2e35a901f68b57bee8631e3 +Author: Paul Seyfert <pseyfert@mathphys.fsk.uni-heidelberg.de> +Date: Sun Feb 5 17:10:41 2012 +0100 + + Updated German translation + + po/de.po | 638 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 332 insertions(+), 306 deletions(-) + +commit b52b965d0d25f56b561bdea9e43d9fd3510f6338 +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Sat Feb 4 15:27:29 2012 +0100 + + Updated Dutch translation + + po/nl.po | 636 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 331 insertions(+), 305 deletions(-) + +commit 6e5d9055be16d1b0bb0518edc1b34b3fba46144a +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Thu Feb 2 20:53:47 2012 -0500 + + po: Updated en_CA.po + + po/en_CA.po | 1599 +++++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 1013 insertions(+), 586 deletions(-) + +commit b2b3aa269cba01e129d92905cde6268aa9e23eb3 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 25 20:54:52 2012 +0100 + + Assume sRGB if no display profile is set + + Gimp and Firefox make this assumption as well. + + https://bugzilla.gnome.org/show_bug.cgi?id=563760 + + src/eog-window.c | 15 +++++++++------ + 1 file changed, 9 insertions(+), 6 deletions(-) + +commit c93aa0b94ba6142c78ea5025a56a0f70c6fc0739 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Jan 25 13:18:03 2012 +0200 + + Do not show the titlebar when eog is maximized. + + This is the default behavior for GNOME 3.4. + + https://bugzilla.gnome.org/show_bug.cgi?id=668652 + + configure.ac | 2 +- + src/eog-window.c | 2 ++ + 2 files changed, 3 insertions(+), 1 deletion(-) + +commit b1c0185858066c92a432957622c2e898a658fc21 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Wed Jan 25 11:20:32 2012 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 862 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 431 insertions(+), 431 deletions(-) + +commit bc16cbf6b026e1a4cd6d7aeccba3efcb8be29d2f +Author: Timo Jyrinki <timo@debian.org> +Date: Tue Jan 24 15:40:13 2012 +0200 + + Updated Finnish translation. + + po/fi.po | 697 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 372 insertions(+), 325 deletions(-) + +commit e897c5ed628ccbe2e5a41ed77a3559a7cd977d0b +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sat Jan 21 21:01:36 2012 +0100 + + Updated Slovenian translation + + po/sl.po | 687 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 358 insertions(+), 329 deletions(-) + +commit 22792935e5fb23478578f33e91cbfd8b490239f0 +Author: Marek Černocký <marek@manet.cz> +Date: Thu Jan 19 13:19:43 2012 +0100 + + Updated Czech translation + + po/cs.po | 668 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 348 insertions(+), 320 deletions(-) + +commit 5b3d916f694433e99432329dab96cbb7e9da66a1 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 18 20:09:07 2012 +0100 + + Update mtime when setting remote images as wallpaper + + Otherwise libgnome-desktop's wallpaper cache might not pick up the new + background if a local copy already existed. + + https://bugzilla.gnome.org/show_bug.cgi?id=664747 + + src/eog-window.c | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +commit 6b28ca6b46fda34855d89564e5097324947ac1b9 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 18 16:07:19 2012 +0100 + + Don't force-enable the sidebar on startup once a page is added + + https://bugzilla.gnome.org/show_bug.cgi?id=668178 + + src/eog-window.c | 3 --- + 1 file changed, 3 deletions(-) + +commit 60f73ef05e4efdad226440d8fca8fe0f11b12a63 +Author: Daniel Nylander <po@danielnylander.se> +Date: Wed Jan 18 10:06:20 2012 +0100 + + Updated Swedish translation + + po/sv.po | 943 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 598 insertions(+), 345 deletions(-) + +commit c4f02b2d4bd518b2397b9b7d61a6c49a3223e577 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 16 23:29:50 2012 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 1dad3b215d7fa7839daf8b4d43072eac21269b70 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 16 23:26:17 2012 +0100 + + Prepare for release 3.3.4 + + NEWS | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +commit 1b00c9c6a102a45c996574cc3bf8a49a91eb32de +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sun Jan 15 15:47:18 2012 +0100 + + Updated Galician translations + + po/gl.po | 1252 ++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 639 insertions(+), 613 deletions(-) + +commit 5ffdfe5041e76620d67584ce6badc3c6d5ef3119 +Author: Alexander Shopov <ash@kambanaria.org> +Date: Sun Jan 8 09:06:26 2012 +0200 + + Updated Bulgarian translation + + po/bg.po | 684 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 360 insertions(+), 324 deletions(-) + +commit cd31ca4113ee841a767865963cff268ae9844441 +Author: Jovan Naumovski <jovan3.14@gmail.com> +Date: Sat Jan 7 00:55:54 2012 +0100 + + Updated Macedonian translation. + + po/mk.po | 1764 ++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 1076 insertions(+), 688 deletions(-) + +commit 66983abb7646a9b2e79be69dddb5e3af1b23082b +Author: Yuri Myasoedov <omerta13@yandex.ru> +Date: Fri Jan 6 01:44:53 2012 +0400 + + Updated Russian translation + + po/ru.po | 649 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 339 insertions(+), 310 deletions(-) + +commit 964e0e2fb706275cbdd047fe080d80402a8c30f5 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 4 21:12:04 2012 +0100 + + Remove unneeded custom signal marshaller + + src/eog-marshal.list | 1 - + src/eog-scroll-view.c | 3 +-- + 2 files changed, 1 insertion(+), 3 deletions(-) + +commit 982a69b0888fc5d0ac3427166aa5cca30b0e97b4 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 4 21:08:27 2012 +0100 + + Extend print preview to scale with plus and minus from keyboard as well + + https://bugzilla.gnome.org/show_bug.cgi?id=495716 + + src/eog-print-image-setup.c | 68 +++++++++++++++++++++++++++++++++++++++++---- + src/eog-print-preview.c | 47 +++++++------------------------ + src/eog-print-preview.h | 6 +++- + 3 files changed, 78 insertions(+), 43 deletions(-) + +commit a7a1cde3fb2d13214b0dd30595d652868ff118af +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Jan 4 17:40:41 2012 +0100 + + Make it possible to scale the print preview using the scrollwheel + + https://bugzilla.gnome.org/show_bug.cgi?id=495716 + + src/eog-print-image-setup.c | 14 ++++++++ + src/eog-print-preview.c | 79 +++++++++++++++++++++++++++++++++++++++++++++ + src/eog-print-preview.h | 2 ++ + 3 files changed, 95 insertions(+) + +commit bcf7817737f0412e6a6de2686ec64b31dd470dca +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 4 15:39:26 2012 +0100 + + Enable more Drag&Drop actions when eog is drag source + + Enable the link and ask actions allowing to create symlinks in Nautilus + or triggering a menu asking what to do. Also enable the move action, + which was not specifically enabled before but still worked anyway. + + https://bugzilla.gnome.org/show_bug.cgi?id=667076 + + src/eog-scroll-view.c | 3 ++- + src/eog-thumb-view.c | 5 ++++- + 2 files changed, 6 insertions(+), 2 deletions(-) + +commit f5d1b331717573bfab58ace8feb31df4fadbcfb7 +Author: Muhammet Kara <muhammet.k@gmail.com> +Date: Sat Dec 31 14:49:17 2011 +0200 + + [l10n]Updated Turkish translation + + po/tr.po | 623 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 324 insertions(+), 299 deletions(-) + +commit 939972523d8c07cb00fd1aaec3b9bf39ac033ea2 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Fri Dec 30 10:52:18 2011 +0200 + + Updated Hebrew translation. + + po/he.po | 655 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 342 insertions(+), 313 deletions(-) + +commit 002e8fae8f10d488ad68ef1404ec3ebbe0333ecf +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Fri Dec 23 22:05:02 2011 +0300 + + Updated Belarusian translation. + + po/be.po | 622 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 324 insertions(+), 298 deletions(-) + +commit c4dfc8e4686b2b7b16e9ff28841ce7d21bf9493d +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Wed Dec 21 21:59:14 2011 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 632 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 329 insertions(+), 303 deletions(-) + +commit 224bf70728d10d4bc7027cc8d871c581528f766c +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Tue Dec 20 23:13:01 2011 -0500 + + [help/C] fixed validation issues. + + help/C/index.page | 3 ++- + help/C/preferences.page | 6 +++--- + 2 files changed, 5 insertions(+), 4 deletions(-) + +commit 8e54083df25cb6ccd666e1d4a09d7e0a118ab257 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Tue Dec 20 13:14:47 2011 +0100 + + Updated Spanish translation + + po/es.po | 622 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 324 insertions(+), 298 deletions(-) + +commit deb2b63128a14dbec75c165e041c6da5023bf54e +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 19 22:41:38 2011 +0100 + + Fix build when not building with libexif and/or exempi + + There were quite some #ifdefs missing. + + https://bugzilla.gnome.org/show_bug.cgi?id=666556 + + src/eog-metadata-sidebar.c | 47 ++++++++++++++++++++++++++++++++++++++++------ + 1 file changed, 41 insertions(+), 6 deletions(-) + +commit 337571057d7e5349e096bdfef4bf68bcd4ee947f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 19 20:41:53 2011 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8e73fb09d2a5623a4cdca13826f118ba435e5d5f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 19 20:34:38 2011 +0100 + + Prepare for release 3.3.3 + + NEWS | 24 ++++++++++++++++++++++++ + 1 file changed, 24 insertions(+) + +commit eee6b67bd1b9b1f0d479d9b6dcb36cf1c8870e5e +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Mon Dec 19 18:35:05 2011 +0100 + + Updated POTFILES.in + + po/POTFILES.in | 17 +++++++++-------- + 1 file changed, 9 insertions(+), 8 deletions(-) + +commit 7ac112f2dde1dcf76b5693d3036dd2d2625a193f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 19 18:20:30 2011 +0100 + + Make Exif/XMP summaries available as sidebar + + Makes the data from the properties dialog available as a sidebar. + A button opens the details tab in the properties dialog. + This is graphically still a bit roughg. + Committing it in hopes to get some early feedback. + + https://bugzilla.gnome.org/show_bug.cgi?id=616438 + + src/Makefile.am | 2 + + src/eog-exif-util.c | 91 +++++++ + src/eog-exif-util.h | 20 +- + src/eog-metadata-sidebar.c | 634 ++++++++++++++++++++++++++++++++++++++++++++ + src/eog-metadata-sidebar.h | 61 +++++ + src/eog-properties-dialog.c | 118 ++------- + src/eog-window.c | 46 +++- + src/eog-window.h | 2 + + 8 files changed, 853 insertions(+), 121 deletions(-) + +commit fa744735911a7445bd83f2119385b82e674b020c +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 15 19:36:06 2011 +0100 + + Use new DBus API to show the current image in the file browser + + This improves the functionality implemented with commit 9df5fd43. + The new API that will be included in Nautilus 3.3.4 not only opens a + view for the containing folder but also marks the image in the view. + The old behaviour is still available as fallback if the new API is + not offered on the system. + + https://bugzilla.gnome.org/show_bug.cgi?id=650402 + + src/eog-util.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + src/eog-util.h | 4 +++ + src/eog-window.c | 40 ++++---------------------- + 3 files changed, 96 insertions(+), 34 deletions(-) + +commit ec1e5e54eae8f499a80a7a6a0f6c32b657af7a2a +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Fri Dec 16 15:56:42 2011 +0100 + + Updated Slovenian translation + + help/sl/sl.po | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 9cc52b559f4520de9bee587cac4988d12898b966 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 14 23:09:23 2011 +0100 + + Rename variable in data dirs Makefile.am + + This was forgotten in commit 4c93c41f and fixes distcheck. + + data/Makefile.am | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ab4c398e363345b9d486c701cdb48322bfff244a +Author: Javier Sánchez <jsanchez@deskblue.com> +Date: Thu Oct 27 12:16:27 2011 +0200 + + Fixed bug 607287 - visibility issue while saving files + + - Reset "metadata::nautilus-icon-position" of the target file when we + copy the file without modifications. + + https://bugzilla.gnome.org/show_bug.cgi?id=607287 + + src/eog-image.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +commit 4c93c41fcfc1cab32c10a66e247d4a0fb3d60a05 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 14 22:02:36 2011 +0100 + + Replace deprecated GtkRCStyle usage with a GtkCssProvider + + Makes EogThumbNav's scrollbar style similar to pre-3.x versions again. + + data/Makefile.am | 4 ++-- + data/eog.css | 7 +++++++ + data/gtkrc | 9 --------- + src/main.c | 21 +++++++++++++++++++-- + 4 files changed, 28 insertions(+), 13 deletions(-) + +commit 3d1859e321b9dea27e49bab9626044f3f5835420 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Dec 14 14:56:31 2011 +0200 + + Use the preferred interpolation type when zoomed instead of assuming the right one + + https://bugzilla.gnome.org/show_bug.cgi?id=665897 + + src/eog-scroll-view.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +commit 32109eb43cb2a856f836d31b99cc08dfe675182d +Author: Kuang Chen <kuangchen@ucla.edu> +Date: Wed Dec 7 17:33:32 2011 +0000 + + Update Simplified Chinese help translation. + + help/zh_CN/zh_CN.po | 4883 +++++++++++++++++++++++++++++++++++++-------------- + 1 file changed, 3604 insertions(+), 1279 deletions(-) + +commit da78cc9ce6d8f02af9003d613fbb88951d0130bc +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 30 14:51:05 2011 +0100 + + Replace uses of deprecated gdk_app_launch_context_new function + + Use gdk_display_get_app_launch_context as advertised in GTK+ docs. + + src/eog-window.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit 208361c7f97076aa12d86801500decf7974d1040 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 30 14:03:40 2011 +0100 + + EogPrintImageSetup: Convert internal GtkTables to GtkGrids + + src/eog-print-image-setup.c | 80 ++++++++++++++++++++++----------------------- + 1 file changed, 40 insertions(+), 40 deletions(-) + +commit 7fd3bcf82459b6d370649119ee10b6be902b89f1 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 30 13:38:25 2011 +0100 + + EogPrintImageSetup: Derive from GtkTable instead of GtkGrid + + GtkTable has been deprecated in favor of GtkGrid. + + src/eog-print-image-setup.c | 19 ++++++------------- + src/eog-print-image-setup.h | 4 ++-- + 2 files changed, 8 insertions(+), 15 deletions(-) + +commit c02ff5d5ebe9f86855c3e5d8827fae4d2846721b +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Nov 30 12:30:00 2011 +0100 + + Don't use deprecated gdk_cursor_unref() anymore + + src/eog-print-preview.c | 2 +- + src/eog-scroll-view.c | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit 2ec0b081b48a4f38c1798d70040f489af103a396 +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Tue Nov 29 21:37:11 2011 +0100 + + Updated Dutch translation by Wouter Bolsterlee + + po/nl.po | 373 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 193 insertions(+), 180 deletions(-) + +commit 8af8ac974294f9a42a8f7e43aaf251bbd4141c7d +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Nov 26 16:11:45 2011 +0100 + + Stop using g_format_size_for_display() + + It uses the wrong unit suffixes/basis and has since been declared as + deprecated. Replaced by g_format_size() using the correct basis. + + src/eog-file-chooser.c | 4 ++-- + src/eog-properties-dialog.c | 2 +- + src/eog-thumb-view.c | 2 +- + src/eog-window.c | 4 ++-- + 4 files changed, 6 insertions(+), 6 deletions(-) + +commit 00ab54e04b7bbf2592b99152339569138ce9091f +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Nov 26 16:05:44 2011 +0100 + + Replace gtk_{v,h}box new with gtk_box_new + + The GtkHBox and GtkVBox APIs have been deprecated by now. + + src/eog-close-confirmation-dialog.c | 10 +++++----- + src/eog-error-message-area.c | 4 ++-- + src/eog-file-chooser.c | 2 +- + src/eog-print-image-setup.c | 2 +- + src/eog-sidebar.c | 4 ++-- + src/eog-statusbar.c | 2 +- + src/eog-window.c | 17 +++++++++-------- + 7 files changed, 21 insertions(+), 20 deletions(-) + +commit ada6e43cc97f34298aac8d58e3501c66441edc57 +Author: Diego Escalante Urrelo <descalante@igalia.com> +Date: Fri Oct 7 23:46:04 2011 +0000 + + toolbareditor: use GtkBox instead of H/V versions + + Bug #661240 + + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 8 +++++--- + cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 4 ++-- + cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 6 ++++-- + cut-n-paste/toolbar-editor/egg-toolbar-editor.h | 4 ++-- + 4 files changed, 13 insertions(+), 9 deletions(-) + +commit 1a382d8fcfe3021895d5024d19f45985b442ad8d +Author: Diego Escalante Urrelo <descalante@igalia.com> +Date: Fri Oct 7 23:34:22 2011 +0000 + + toolbareditor: use GtkGrid instead of GtkTable + + Bug #661240 + + cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 42 ++++++++++++------------- + 1 file changed, 21 insertions(+), 21 deletions(-) + +commit 8fd4bf392f5596a509b7183e1a7e8dceb3935808 +Author: Diego Escalante Urrelo <descalante@igalia.com> +Date: Fri Oct 7 23:33:44 2011 +0000 + + toolbareditor: use GtkSeparator instead of GtkHSeparator + + Bug #661240 + + cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 9dfcd2aaebec4ef9255b9c524a62e081fa7e3522 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 21 22:24:36 2011 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit e34962fdb60fead082e2cd75959c991e3326a4eb +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 21 22:18:42 2011 +0100 + + Prepare for release 3.3.2 + + NEWS | 46 ++++++++++++++++++++++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 47 insertions(+), 1 deletion(-) + +commit 51ae2b54f2c2b8b20cfc0f2a7fe215f625baea29 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 21 21:58:10 2011 +0100 + + Raise minimum glib dependency to 2.31.0 + + Commit ee4f6b27 could cause trouble with older versions. + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 069f35caa1fc796dd0d3f8a786d730f317128156 +Author: Paul Seyfert <pseyfert@mathphys.fsk.uni-heidelberg.de> +Date: Sat Nov 19 21:39:37 2011 +0100 + + [l10n] Updated German translation + + po/de.po | 355 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 183 insertions(+), 172 deletions(-) + +commit 282c53cbfa075276fa2ce578dbabfd9e6cd502ee +Author: Stas Solovey <whats_up@tut.by> +Date: Tue Nov 15 00:39:35 2011 +0400 + + Updated Russian translation + + po/ru.po | 352 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 177 insertions(+), 175 deletions(-) + +commit c8ae8a4e87b9f7322d0d08ceb88f1a232138882e +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Mon Nov 14 18:18:16 2011 +0100 + + Updated Spanish translation + + help/es/es.po | 70 +++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 46 insertions(+), 24 deletions(-) + +commit ab5b7261775ebee02512594b197eb1cf107d0cbc +Author: Thura Hlaing <trhura@gmail.com> +Date: Mon Nov 14 22:21:15 2011 +0700 + + Added Burmese translation. + + po/LINGUAS | 1 + + po/my.po | 1455 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1456 insertions(+) + +commit 34aa279c5e113a77645837a930370b405dae65f1 +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Mon Nov 14 00:24:35 2011 -0500 + + [documentation] Clarified wording about slideshow control. + + This fixes bug #661325. + + help/C/slideshow.page | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +commit 3456c0dff2279114010f085cd2ecf08fe5b9d500 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sun Nov 13 22:58:15 2011 +0100 + + Updated Galician translations + + po/gl.po | 32 +++++++++++++++++++------------- + 1 file changed, 19 insertions(+), 13 deletions(-) + +commit 7c38ce7efc98a0571e299402e2e040f83c9498af +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Sat Nov 12 16:14:40 2011 -0500 + + [documentation] Fixed reference to link in bug-filing.page. + + help/C/bug-filing.page | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +commit e7416ca6fc711b1e0a0414a8f5444ffc2cce87c4 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Wed Nov 9 19:36:09 2011 +0100 + + Updated Spanish translation + + help/es/es.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit a114558db8257bbdb81ff63caa28fe92e5e38a33 +Author: Hideki Yamane <henrich@debian.org> +Date: Tue Nov 8 01:36:54 2011 +0900 + + Updated Japanese translation + + po/ja.po | 440 +++++++++++++++++++++++++-------------------------------------- + 1 file changed, 172 insertions(+), 268 deletions(-) + +commit ee4f6b27027421ee1e7cb14948f587da83171668 +Author: Ryan Lortie <desrt@desrt.ca> +Date: Wed Nov 2 10:08:14 2011 -0400 + + Don't lock GDK around g_application_run() + + An unintended interaction between GtkApplication and GDK threading made + this necessary before. That code has since been simplified, breaking + this formerly-working code. + + https://bugzilla.gnome.org/show_bug.cgi?id=662630 + + src/main.c | 4 ---- + 1 file changed, 4 deletions(-) + +commit f63d786e8334a78fb1b2d7c514367d8306a8e448 +Author: Andiswa Mvanyashe <andiswamva@webmail.co.za> +Date: Mon Oct 31 22:56:25 2011 +0200 + + Updated translation for Xhosa (xh) + + po/xh.po | 1906 ++++++++++++++++++++++++++++++++++++++++++++++---------------- + 1 file changed, 1407 insertions(+), 499 deletions(-) + +commit 4626596c2c179bfe35c4212efced15c38d7337d6 +Author: Javier Sánchez <jsanchez@deskblue.com> +Date: Sun Oct 16 13:55:09 2011 +0200 + + Fixed Bug 653065 - On edit of image, permissions changed. + + - Try to restore file UID, GID, and MODE attributes from original + image file to temp image file, before replace it. + + https://bugzilla.gnome.org/show_bug.cgi?id=653065 + + src/eog-image.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + src/eog-jobs.c | 27 -------------- + 2 files changed, 108 insertions(+), 27 deletions(-) + +commit 2baaacb90a45fd00e6fde08909446834a5a138ec +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Thu Oct 27 19:59:56 2011 +0200 + + Some error fixes in the Hungarian help translation + + help/hu/hu.po | 18 ++++++++---------- + 1 file changed, 8 insertions(+), 10 deletions(-) + +commit 278ce22f71ddad955398339ad6d5b7160c38f467 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Tue Oct 25 02:11:32 2011 +0200 + + Updated Hungarian help translation + + help/hu/hu.po | 91 ++++++++++++++++++++++------------------------------------- + 1 file changed, 34 insertions(+), 57 deletions(-) + +commit fc3ab8c8782b96cd5855da62df05e63840d263a1 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Mon Oct 24 00:53:24 2011 +0300 + + Updated Belarusian translation. + + po/be.po | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +commit 83c5c27777a1326c3ca3131bd430f2551c2ae599 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Sat Oct 22 12:13:10 2011 +0200 + + Updated Hebrew translation. + + po/he.po | 520 +++++++++++++++++++++++++++------------------------------------ + 1 file changed, 225 insertions(+), 295 deletions(-) + +commit 631213f7421c9ecf999812239f3d9e13e0bfa8d9 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Fri Oct 21 21:21:00 2011 +0200 + + Updated Slovenian translation + + po/sl.po | 26 +++++++++++++++----------- + 1 file changed, 15 insertions(+), 11 deletions(-) + +commit e01ddddb08295171ea94e1a86d6293ec971c59fb +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Thu Oct 20 22:42:40 2011 +0300 + + Updated Belarusian translation. + + po/be.po | 299 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 154 insertions(+), 145 deletions(-) + +commit 38e946d13571a7bd200b4aadde3715f24f692c54 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Oct 20 11:55:27 2011 +0200 + + Have automake generate XZ-compressed tarballs on dist + + The GNOME FTPs will make it the only compression format for TARs soon. + This raises the minimum automake version to 1.11. + + autogen.sh | 2 +- + configure.ac | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit 307d5b4f4fca2e0af4016b6e5bf87403c16cae88 +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Mon Oct 17 16:11:22 2011 +0200 + + Updated French doc translation + + .../{mutiple-rename-count.png => multiple-rename-count.png} | Bin + 1 file changed, 0 insertions(+), 0 deletions(-) + +commit 5e7846815212d980a5b7547bd71d249be1eeea7d +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Mon Oct 17 16:07:08 2011 +0200 + + Updated French doc translation + + help/fr/figures/eog-toolbar-editor.png | Bin 0 -> 35696 bytes + help/fr/figures/image-view-prefs.png | Bin 0 -> 36667 bytes + help/fr/figures/multiple-convert.png | Bin 0 -> 37895 bytes + help/fr/figures/mutiple-rename-count.png | Bin 0 -> 39787 bytes + help/fr/figures/plugin-send-by-mail.png | Bin 0 -> 64851 bytes + help/fr/figures/plugin-tools-flickr.png | Bin 0 -> 66554 bytes + help/fr/figures/plugins-all.png | Bin 0 -> 84146 bytes + help/fr/figures/prefs-plugins-date.png | Bin 0 -> 31183 bytes + help/fr/figures/prefs-plugins-fullscreen.png | Bin 0 -> 31169 bytes + help/fr/figures/prefs-plugins.png | Bin 0 -> 30888 bytes + help/fr/figures/slideshow-prefs.png | Bin 0 -> 23955 bytes + help/fr/fr.po | 21 +++++++++++++++++++-- + 12 files changed, 19 insertions(+), 2 deletions(-) + +commit 8c843190f0bcc775db8e196f17e8c9348fbe4436 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Mon Oct 17 19:43:12 2011 +1100 + + Updated Vietnamese translation + + po/vi.po | 61 ++++++++++++++++++++++++------------------------------------- + 1 file changed, 24 insertions(+), 37 deletions(-) + +commit 7a8cdc2b6cd217452e3885a2b70c80442f68f5d3 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Mon Oct 17 19:38:08 2011 +1100 + + po/vi: import from Damned Lies + + po/vi.po | 491 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 284 insertions(+), 207 deletions(-) + +commit 5c3b3fe08a33a55f7bcfc567e0f5c871bd2f7480 +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Sun Oct 16 21:59:55 2011 +0200 + + Updated French doc translation + + help/fr/figures/eog_save_as_window.png | Bin 32443 -> 0 bytes + help/fr/figures/eog_start_window.png | Bin 18290 -> 0 bytes + help/fr/figures/eog_toolbar_editor_window.png | Bin 27099 -> 0 bytes + help/fr/fr.po | 2749 +++++++++++++------------ + 4 files changed, 1482 insertions(+), 1267 deletions(-) + +commit 329f667d47bb43650e7eb790c1585bfb1b068133 +Author: krishnababu k <kkrothap@redhat.ocm> +Date: Fri Oct 14 14:07:31 2011 +0530 + + Updated Telugu Translations + + po/te.po | 549 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 301 insertions(+), 248 deletions(-) + +commit 7f89e5d2c52117f976b645303f8b77428df91671 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Thu Oct 13 15:31:26 2011 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 303 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 157 insertions(+), 146 deletions(-) + +commit e51fe5841cc17c5d0686442e90e770be2f52374e +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 12 14:40:43 2011 +0200 + + Fix some introspection annotations + + There were element-type annotations for list parameters of + several functions. + + src/eog-application.c | 4 ++-- + src/eog-image.c | 2 +- + src/eog-list-store.c | 4 ++-- + src/eog-window.c | 2 +- + 4 files changed, 6 insertions(+), 6 deletions(-) + +commit bb59f929900d9e70f8b62944334e37f610deb7a6 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Tue Oct 11 22:19:17 2011 +0200 + + Updated Hungarian translation + + help/hu/hu.po | 2669 ++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 1684 insertions(+), 985 deletions(-) + +commit e60a793973f8579513b4eb0f46258a024e868150 +Author: krishnababu k <kkrothap@redhat.ocm> +Date: Mon Oct 10 16:59:11 2011 +0530 + + Updated Telugu Translations + + po/te.po | 397 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 213 insertions(+), 184 deletions(-) + +commit dae6a35af8029deed58c3a58f96dca34dfc1faac +Author: Muhammet Kara <muhammet.k@gmail.com> +Date: Mon Oct 10 09:34:17 2011 +0300 + + Updated Turkish translation + + po/tr.po | 314 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 157 insertions(+), 157 deletions(-) + +commit 097f37cb7848f204ab89e75b735d48501637fc0c +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sun Oct 9 11:48:32 2011 +0200 + + Updated Spanish translation + + po/es.po | 28 +++++++++++++++++----------- + 1 file changed, 17 insertions(+), 11 deletions(-) + +commit 46c8fca7f44a2854bdc9bb3e727d6ecc30342f53 +Author: Algimantas Margevičius <gymka@mail.ru> +Date: Sun Oct 9 00:25:08 2011 +0300 + + Updated Lithuanian translation + + po/lt.po | 349 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 172 insertions(+), 177 deletions(-) + +commit 1703a45f02a3db567935622e21716a8a1a8d75ea +Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> +Date: Sat Oct 8 14:32:34 2011 +0200 + + Updated Slovenian translation + + help/sl/sl.po | 2366 +++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 1470 insertions(+), 896 deletions(-) + +commit 45ed40ecb15a1db97ad34752a237d187b2aec34c +Author: Michael Wünsch <liganic-eog@gmx.org> +Date: Thu Oct 6 17:56:16 2011 +0200 + + Allow reusing an existing window for another image from the commandline + + Reuses an existing window instead of opening a new one. + For now this is only supported from the commandline. + + https://bugzilla.gnome.org/show_bug.cgi?id=617735 + + src/eog-application.c | 40 +++++++++++++++++++++++++++++++++++----- + src/eog-window.h | 3 ++- + src/main.c | 5 +++++ + 3 files changed, 42 insertions(+), 6 deletions(-) + +commit 45d1e2d462d8045ada32005bf36d2e78536b4ed8 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Oct 7 10:52:37 2011 +0200 + + Updated Spanish translation + + po/es.po | 281 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 143 insertions(+), 138 deletions(-) + +commit 9efdbdc67844b59b82e377874c7dde80c4ea84b1 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Tue Oct 4 20:28:24 2011 +0200 + + Updated Slovenian translation + + po/sl.po | 321 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 159 insertions(+), 162 deletions(-) + +commit a627661d0bdb518adb31c76261ddaa0342d25496 +Author: Fran Dieguez <fran@openhost.es> +Date: Tue Oct 4 11:22:42 2011 +0200 + + Updated Galician translations + + po/gl.po | 280 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 142 insertions(+), 138 deletions(-) + +commit 81acc92c57f6713b4fb494c0c789ac3ec17adaed +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 3 23:01:50 2011 +0200 + + Make the URI-label in the properties dialog a button showing the folder + + This should avoid the label being cut-off while still being informative + enough. Clicking the button opens the folder in the file manager. + + https://bugzilla.gnome.org/show_bug.cgi?id=614869 + + data/eog-image-properties-dialog.ui | 509 +++++++++++++++++++++--------------- + src/eog-properties-dialog.c | 54 +++- + 2 files changed, 344 insertions(+), 219 deletions(-) + +commit e83787ad630df42e98ded11ed05a0377590f078b +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 23 20:58:20 2011 +0200 + + Reduce vertical borders of progressbar in statusbar to avoid redraws + + Otherwise the progressbar causes the statusbar to enlarge which will + trigger a redraw of the already shown picture. + + https://bugzilla.gnome.org/show_bug.cgi?id=655205 + + src/eog-statusbar.c | 9 ++++++++- + 1 file changed, 8 insertions(+), 1 deletion(-) + +commit 3764db24f7d5e570b39894a05ba71a09012eea24 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 30 20:30:16 2011 +0200 + + Auto-reload unmodified images when their file is changed + + It makes sense to skip the user confirmation in this case as there are + no unsaved changed that could get lost. + + https://bugzilla.gnome.org/show_bug.cgi?id=555370 + + src/eog-window.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +commit 7184c444a508db135e85aae8b2041fb85ea8f163 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 3 23:07:22 2011 +0200 + + Post-branch version bump + + Show the "instability" of this branch again. + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit abe2d406d61a40073b6d8f8cfa3ae5cedf451c0f +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 30 23:26:44 2011 +0200 + + Revert "Remove unneeded static variable" + + This reverts commit d90c385f06fc57837bbfe39e7f8b6084eccaace9. + + Let's keep it how it's done in the GObject manual for now. + + src/eog-window-activatable.c | 33 +++++++++++++++++++-------------- + 1 file changed, 19 insertions(+), 14 deletions(-) + +commit d90c385f06fc57837bbfe39e7f8b6084eccaace9 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 30 22:54:01 2011 +0200 + + Remove unneeded static variable + + An interface's default_init function doesn't need to be secured against + multiple calls as it actually behaves similar to a class_init function. + + src/eog-window-activatable.c | 33 ++++++++++++++------------------- + 1 file changed, 14 insertions(+), 19 deletions(-) + +commit e1b7eab94758487986dcfcaceeca5d6114e9a350 +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Wed Sep 28 02:33:04 2011 +0300 + + Uploaded Ukranian + + po/uk.po | 460 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 255 insertions(+), 205 deletions(-) + +commit 8c499a36b7f2ce8bb8dfec5e681c0bf58a7dd1f7 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 26 22:16:21 2011 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 6c7c8635b0b5dc5919b64e423dce835e9f6a7c17 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 26 22:11:16 2011 +0200 + + Prepare for release 3.2.0 + + NEWS | 25 +++++++++++++++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 27 insertions(+), 2 deletions(-) + +commit 9d62d3e7212ce5812f1ec9f40fb8696eeff37275 +Author: Carles Ferrando <carles.ferrando@gmail.com> +Date: Mon Sep 26 14:22:40 2011 +0200 + + [l10n]Updated Catalan (Valencian) translation + + po/ca@valencia.po | 473 +++++++++++++++++++++++++++++------------------------- + 1 file changed, 254 insertions(+), 219 deletions(-) + +commit 34733b2c932bde0f8fa67bef7aa00d351638b994 +Author: Friedel Wolff <friedel@translate.org.za> +Date: Mon Sep 26 10:16:32 2011 +0200 + + Updated translation for Afrikaans (af) + + po/af.po | 947 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 464 insertions(+), 483 deletions(-) + +commit 0424bb84435f53da77c5398af4f1acd8e7d47515 +Author: Yasumichi Akahoshi <yasumichi@vinelinux.org> +Date: Mon Sep 26 06:29:06 2011 +0900 + + Updated Japanese translation + + help/ja/figures/eog-toolbar-editor.png | Bin 0 -> 12107 bytes + help/ja/figures/eog_save_as_window.png | Bin 14080 -> 0 bytes + help/ja/figures/eog_start_window.png | Bin 7912 -> 0 bytes + help/ja/figures/eog_toolbar_editor_window.png | Bin 12420 -> 0 bytes + help/ja/figures/image-view-prefs.png | Bin 0 -> 13871 bytes + help/ja/figures/multiple-convert.png | Bin 0 -> 12553 bytes + help/ja/figures/multiple-rename-count.png | Bin 0 -> 13359 bytes + help/ja/figures/plugin-send-by-mail.png | Bin 0 -> 22025 bytes + help/ja/figures/plugin-tools-flickr.png | Bin 0 -> 21927 bytes + help/ja/figures/plugins-all.png | Bin 0 -> 25758 bytes + help/ja/figures/prefs-plugins-date.png | Bin 0 -> 14016 bytes + help/ja/figures/prefs-plugins-fullscreen.png | Bin 0 -> 13681 bytes + help/ja/figures/prefs-plugins.png | Bin 0 -> 13173 bytes + help/ja/figures/slideshow-prefs.png | Bin 0 -> 10748 bytes + help/ja/ja.po | 3625 ++++++++++++++----------- + 15 files changed, 2083 insertions(+), 1542 deletions(-) + +commit 08fa7dd549bd04f20bfe8b0b624d57960f3aaecc +Author: Laura Balbastre <laura.balbastre.soler@gmail.com> +Date: Sun Sep 25 23:20:16 2011 +0200 + + [l10n]Updated Catalan translation + + po/ca.po | 466 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 257 insertions(+), 209 deletions(-) + +commit fb509925e6f7616c888f63f40d148f80768ee2a9 +Author: Changwoo Ryu <cwryu@debian.org> +Date: Mon Sep 26 05:26:33 2011 +0900 + + Updated Korean translation + + help/ko/ko.po | 2989 ++++++++++++++++++++++++++++++++------------------------- + po/ko.po | 8 +- + 2 files changed, 1684 insertions(+), 1313 deletions(-) + +commit 70d2c490b72bb8ea96aa4db972ef048b27d889f9 +Author: Yasumichi Akahoshi <yasumichi@vinelinux.org> +Date: Mon Sep 26 00:27:26 2011 +0900 + + Updated Japanese translation + + po/ja.po | 534 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 294 insertions(+), 240 deletions(-) + +commit 73f5bb7418c1763c03bde99a5382f83999bb7467 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sun Sep 25 12:45:42 2011 +0200 + + Updated Polish translation + + po/pl.po | 20 ++++++++++---------- + 1 file changed, 10 insertions(+), 10 deletions(-) + +commit 376e09483ce92adcaa49a3bf1211c4df7a27266e +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Fri Sep 23 17:34:13 2011 +0200 + + Updated Basque language + + po/eu.po | 519 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 290 insertions(+), 229 deletions(-) + +commit 452fd6650f73e5969934f32bb8a55ca9440ef164 +Author: Sweta Kothari <swkothar@redhat.com> +Date: Fri Sep 23 14:41:14 2011 +0530 + + Updated Gujarati Translations + + po/gu.po | 568 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 305 insertions(+), 263 deletions(-) + +commit 3179fb14c0107961c04097262b0c75e9c42314b9 +Author: Tommi Vainikainen <thv@iki.fi> +Date: Fri Sep 23 11:18:57 2011 +0300 + + Updated Finnish translation + + po/fi.po | 48 ++++++++++++++++-------------------------------- + 1 file changed, 16 insertions(+), 32 deletions(-) + +commit 2fc357ba99532157324395c54e4ee0b2b8496548 +Author: Nilamdyuti Goswami <ngoswami@redhat.com> +Date: Thu Sep 22 12:14:21 2011 +0200 + + Update Assamese translation + + po/as.po | 1086 +++++++++++++++++++++++++++----------------------------------- + 1 file changed, 469 insertions(+), 617 deletions(-) + +commit c5c88193845448ebc7ae21b679dd5eb7d045b222 +Author: Michal Štrba <faiface2202@gmail.com> +Date: Wed Sep 21 21:21:00 2011 +0200 + + Updated Slovak translation + + po/sk.po | 525 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 249 insertions(+), 276 deletions(-) + +commit d52f76fb5eac32c30b6197c91c4946ab98a2afe1 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Wed Sep 21 19:50:43 2011 +0200 + + [1l0n] Updated Italian translation + + po/it.po | 505 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 272 insertions(+), 233 deletions(-) + +commit 59f14d10edc5bfc7a4ca9bba0dc7c2c5a9149ca7 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Wed Sep 21 02:38:10 2011 +0200 + + Updated Hungarian translation + + po/hu.po | 318 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 162 insertions(+), 156 deletions(-) + +commit 2087f4fa4a566709849d4fbf640581c66d580a65 +Author: Ernest Mashele <mashern@tuks.co.za> +Date: Tue Sep 20 17:44:40 2011 +0200 + + Updated Tsonga translation + + po/ts.po | 310 ++++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 196 insertions(+), 114 deletions(-) + +commit 8a5576cc08ca4932cb56b133385d2bba1497de31 +Author: Fran Dieguez <fran@openhost.es> +Date: Tue Sep 20 11:00:59 2011 +0200 + + Updated Galician translations + + help/Makefile.am | 2 +- + help/gl/gl.po | 2144 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 2145 insertions(+), 1 deletion(-) + +commit cd8edeeab271e070719ca34f8b6c1723f7a52c3f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 19 22:15:44 2011 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 09ca56be923f91c8e9d5fe65e6769fd723915309 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 19 22:10:01 2011 +0200 + + Prepare for release 3.1.92 + + NEWS | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 49 insertions(+) + +commit 2c4fd0a781704d2de5bb2a545adad5950395f95b +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 19 21:50:45 2011 +0200 + + [reload] Drop forgotten debug printf + + plugins/reload/eog-reload-plugin.c | 1 - + 1 file changed, 1 deletion(-) + +commit 4107d1ab548a0976ef2846a316c677e50479c592 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 19 21:47:30 2011 +0200 + + [l10n] Fix translator credit markup + + "Unbreak" about dialog. + + po/de.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit f9ea1ab6f252ef48e0f120fbf233ca4ef48f636f +Author: Ernest Mashele <mashern@tuks.co.za> +Date: Mon Sep 19 20:09:16 2011 +0200 + + Added Tsonga translation + + po/LINGUAS | 1 + + po/ts.po | 1459 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1460 insertions(+) + +commit af6f776ff616e6632a7dbf8cdab35c023e6658dc +Author: Muhammet Kara <muhammet.k@gmail.com> +Date: Sun Sep 18 21:44:00 2011 +0300 + + Updated Turkish translation + + po/tr.po | 450 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 250 insertions(+), 200 deletions(-) + +commit 30f5aad9892a0cae728b098e6c25059a07ca0f85 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Sun Sep 18 15:54:15 2011 +0300 + + Updated Belarusian translation (some fixes after manual testing). + + po/be.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit 1f15c866e49e1435d0670eb34484030524171653 +Author: Mario Blättermann <mariobl@gnome.org> +Date: Sun Sep 18 13:38:12 2011 +0200 + + [l10n] Updated German translation + + po/de.po | 435 +++++++++++++++++++++++---------------------------------------- + 1 file changed, 155 insertions(+), 280 deletions(-) + +commit c42d2252746d87176c278a5c04198b9eeb9eb8c2 +Author: Kenneth Nielsen <k.nielsen81@gmail.com> +Date: Sun Sep 18 13:18:20 2011 +0200 + + Updated Danish translation + + po/da.po | 482 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 267 insertions(+), 215 deletions(-) + +commit 8ac076651a6e1515885a8b5d82587f49f39a7318 +Author: Alexander Shopov <ash@kambanaria.org> +Date: Sun Sep 18 10:54:34 2011 +0300 + + Updated Bulgarian translation + + po/bg.po | 78 +++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 40 insertions(+), 38 deletions(-) + +commit b229d8355af80a0eed5fd26f14aa5a715bfdb1ec +Author: Tiffany Antopolski <tiffany.antopolski@gmail.com> +Date: Sun Sep 18 06:45:49 2011 +0200 + + Updated Esperanto translation + + po/eo.po | 35 ++++++++++++++++++----------------- + 1 file changed, 18 insertions(+), 17 deletions(-) + +commit 39a26563b944f89a5fdbcdef1fb3d19b5bcd4ee2 +Author: A S Alam <aalam@users.sf.net> +Date: Sun Sep 18 00:54:06 2011 +0530 + + update Punjabi Translation + + po/pa.po | 329 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 169 insertions(+), 160 deletions(-) + +commit e2ff1a089a3a1f2eee0b9aa5b210baf6a77ed65d +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sat Sep 17 10:53:24 2011 +0200 + + Updated Slovenian translation + + po/sl.po | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +commit 726fbe1196fd1ec335366bce0a5bc6687d1dd1fb +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Sat Sep 17 14:02:36 2011 +0700 + + Updated Thai translation. + + po/th.po | 308 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 154 insertions(+), 154 deletions(-) + +commit 581cad8d8311d568bf68c8d37171a393a716fb17 +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Sat Sep 17 00:12:32 2011 +0200 + + Updated Serbian translation + + po/sr.po | 794 +++++++++++++++++++++++++++++++-------------------------- + po/sr@latin.po | 794 +++++++++++++++++++++++++++++++-------------------------- + 2 files changed, 854 insertions(+), 734 deletions(-) + +commit 3d50ecd355acd947704dde465de51b383ccc6d25 +Author: Antonio Fernandes C. Neto <fernandesn@gnome.org> +Date: Fri Sep 16 09:13:18 2011 -0300 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 45 ++++++++++++++++++++++++--------------------- + 1 file changed, 24 insertions(+), 21 deletions(-) + +commit fbc53fedb15eda22dcc522ed6dbcd7bdb6f7d9b6 +Author: Vincent Untz <vuntz@gnome.org> +Date: Wed Sep 14 22:37:57 2011 +0200 + + build: Update list of doc figures + + https://bugzilla.gnome.org/show_bug.cgi?id=659093 + + help/Makefile.am | 8 ++------ + 1 file changed, 2 insertions(+), 6 deletions(-) + +commit a9eebfbac55ff90cb8f53ef19cfe61afe91557ae +Author: Martin Srebotnjak <miles@filmsi.net> +Date: Thu Sep 15 22:34:00 2011 +0200 + + Updated Slovenian translation + + po/sl.po | 460 ++++++++++++++++++++++++++------------------------------------- + 1 file changed, 187 insertions(+), 273 deletions(-) + +commit b84331d348a71b6d8c135b88972a5f225ff2216d +Author: dmustieles <daniel.mustieles@gmail.com> +Date: Wed Sep 14 17:09:35 2011 +0200 + + Updated Spanish translation + + po/es.po | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +commit 7014474af8e571241b43634ca34849f6a177feee +Author: Xandru Armesto <xandru@softastur.org> +Date: Wed Sep 14 16:43:12 2011 +0200 + + Updated asturian translation + + po/ast.po | 983 ++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 544 insertions(+), 439 deletions(-) + +commit 9e06e208d734824dd6ad8bc50c7930602f1c4c86 +Author: Dr.T.Vasudevan <agnihot3@gmail.com> +Date: Tue Sep 13 14:31:29 2011 +0530 + + updated Tamil translation + + po/ta.po | 481 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 269 insertions(+), 212 deletions(-) + +commit b62b18f6b89c9fdcde6e2c0d94c5d32889042c3c +Author: YunQiang Su <yqsu@src.gnome.org> +Date: Tue Sep 13 11:16:27 2011 +0800 + + update Simplified Chinese(zh_CN) translation + + po/zh_CN.po | 316 +++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 161 insertions(+), 155 deletions(-) + +commit 8bf3189167eadb8965e22690a9ef3716c28243cf +Author: Changwoo Ryu <cwryu@debian.org> +Date: Tue Sep 13 08:51:47 2011 +0900 + + Updated Korean translation + + po/ko.po | 477 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 266 insertions(+), 211 deletions(-) + +commit 316f925f92c4b82e6d1affd8a056b5d4c568ef99 +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Mon Sep 12 21:18:09 2011 +0200 + + Updated French translation + + po/fr.po | 50 +++++++++++++++++++++++--------------------------- + 1 file changed, 23 insertions(+), 27 deletions(-) + +commit dc7d8f9ddacd0594f4d84c5561c1ca2119212eed +Author: Daniel Nylander <po@danielnylander.se> +Date: Mon Sep 12 20:35:00 2011 +0200 + + Updated Swedish translation + + po/sv.po | 559 ++++++++++++++++++++------------------------------------------- + 1 file changed, 174 insertions(+), 385 deletions(-) + +commit 8ebaf9ca0abb6d5af904cee1ee500a559c69096d +Author: Rudolfs Mazurs <rudolfs.mazurs@gmail.com> +Date: Mon Sep 12 00:37:17 2011 +0300 + + Updated Latvian translation. + + po/lv.po | 447 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 248 insertions(+), 199 deletions(-) + +commit 16f1cd725905acb19366a7d8d06c10653ecafb9a +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sun Sep 11 17:36:17 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 12 +++--------- + 1 file changed, 3 insertions(+), 9 deletions(-) + +commit f8a3a604d2d1258405a99482ef884986c66bb2b0 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sun Sep 11 11:10:04 2011 +0200 + + Updated Spanish translation + + po/es.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit 05b39882fcbeb8a69849834b0d9f5090a2db07b8 +Author: Kristjan SCHMIDT <kristjan.schmidt@googlemail.com> +Date: Sun Sep 11 08:21:59 2011 +0200 + + Updated Esperanto translation + + po/eo.po | 715 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 396 insertions(+), 319 deletions(-) + +commit cfe0221a7d53c921522ffaddc603f6a26d40f2d7 +Author: Mario Blättermann <mariobl@gnome.org> +Date: Sun Sep 11 01:42:22 2011 +0200 + + [l10n] Updated German doc translation + + help/de/de.po | 473 ++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 308 insertions(+), 165 deletions(-) + +commit f1b4dd066c8cd35a708bbc6229da19c74e3c4c3d +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Sep 10 16:57:45 2011 +0200 + + Updated Spanish translation + + help/es/figures/plugins-all.png | Bin 0 -> 64341 bytes + help/es/figures/prefs-plugins-date.png | Bin 0 -> 34189 bytes + 2 files changed, 0 insertions(+), 0 deletions(-) + +commit 60f589e60833eb3696fbdbba2f5489fd0c9226fb +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Sep 10 16:57:19 2011 +0200 + + Updated Spanish translation + + help/es/figures/eog-toolbar-editor.png | Bin 28877 -> 27337 bytes + 1 file changed, 0 insertions(+), 0 deletions(-) + +commit 3a4e301caf0d353bd82477733f0d586ee1cc0e56 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Sep 10 16:51:09 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 196 ++------------------------ + help/es/figures/eog-toolbar-editor.png | Bin 0 -> 28877 bytes + help/es/figures/eog_save_as_window.png | Bin 30227 -> 0 bytes + help/es/figures/eog_start_window.png | Bin 19224 -> 0 bytes + help/es/figures/eog_toolbar_editor_window.png | Bin 25391 -> 0 bytes + help/es/figures/image-view-prefs.png | Bin 0 -> 32334 bytes + help/es/figures/plugin-send-by-mail.png | Bin 0 -> 21128 bytes + help/es/figures/plugin-tools-flickr.png | Bin 0 -> 21115 bytes + help/es/figures/prefs-plugins-fullscreen.png | Bin 0 -> 34176 bytes + help/es/figures/prefs-plugins.png | Bin 0 -> 32484 bytes + help/es/figures/slideshow-prefs.png | Bin 0 -> 23341 bytes + 11 files changed, 9 insertions(+), 187 deletions(-) + +commit 986be394c03c0c92cfc6b220f034e389face0d13 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Sep 10 16:21:57 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 167 ++++++++++++++++++++++++++++++++++++++-------------------- + po/es.po | 13 ++--- + 2 files changed, 113 insertions(+), 67 deletions(-) + +commit a1e9829cfdb92292a415a764a397f6ffdf44fe21 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Sep 10 16:21:36 2011 +0200 + + Fixed one string + + help/C/format-change.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ddb54a8a6e683c34cf715b2312a798bc2bd50fa2 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Sep 10 14:06:20 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 19 ++++++++++++++++++- + 1 file changed, 18 insertions(+), 1 deletion(-) + +commit ffd30be64266f4f4fe20c22f3ffbd9cb61035d24 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Sep 10 12:02:30 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 105 +++++++++++++++++++++++++--------------------------------- + 1 file changed, 46 insertions(+), 59 deletions(-) + +commit d3c3036b121ba709bcc812e4c69af046ade222bf +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Sat Sep 10 14:56:10 2011 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 64 ++++++++++++++++++++++--------------------------------------- + po/zh_TW.po | 64 ++++++++++++++++++++++--------------------------------------- + 2 files changed, 46 insertions(+), 82 deletions(-) + +commit 4321e128d8fef5e04fcd7bac9e981be4ac7e3b56 +Author: Og B. Maciel <ogmaciel@gnome.org> +Date: Fri Sep 9 08:51:47 2011 -0400 + + Updated timestamp on revision date to see if that makes DL happier. + + po/pt_BR.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c988febf0e86aa845c956319a5ba57af2562fb79 +Author: Antonio Fernandes C. Neto <fernandesn@gnome.org> +Date: Fri Sep 9 08:41:51 2011 -0400 + + Updated Brazilian Portuguese translation. + + po/pt_BR.po | 66 ++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 35 insertions(+), 31 deletions(-) + +commit 816583ec778063f2aa79d82738c458463a1ec9c4 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Fri Sep 9 13:17:04 2011 +0300 + + Updated Hebrew translation. + + po/he.po | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +commit 0122d4db60b38ec2a7d064cdc993f37dceebb12b +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Fri Sep 9 13:16:05 2011 +0300 + + Updated Hebrew translation. + + po/he.po | 313 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 160 insertions(+), 153 deletions(-) + +commit 28f6a5cdce2383fb4c58b412c92c7f91b4e26205 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Sep 9 08:45:42 2011 +0300 + + Enable maintainer-mode by default + + To make desrt happy + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8a6991ab1d1652b2b592f18b3bd8bacc282c6b68 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Thu Sep 8 21:13:26 2011 +0200 + + Updated Polish translation + + po/pl.po | 454 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 246 insertions(+), 208 deletions(-) + +commit f7f568400b3d632330df652f3f76eaedbc9bf9de +Author: Bruce Cowan <bruce@bcowan.me.uk> +Date: Thu Sep 8 16:35:45 2011 +0100 + + Updated British English translation + + po/en_GB.po | 477 +++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 265 insertions(+), 212 deletions(-) + +commit c0e451a2b99fc84a1e57676d50125a44396c4e60 +Author: Yuri Myasoedov <omerta13@yandex.ru> +Date: Thu Sep 8 10:15:04 2011 +0400 + + Updated Russian translation + + po/ru.po | 560 +++++++++++++++++++++++++++------------------------------------ + 1 file changed, 238 insertions(+), 322 deletions(-) + +commit d0c73d266c363ab9994373d888bc37cd76230ce0 +Author: Andika Triwidada <andika@gmail.com> +Date: Thu Sep 8 13:11:34 2011 +0700 + + Updated Indonesian translation + + po/id.po | 372 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 179 insertions(+), 193 deletions(-) + +commit c796e7a58ec624593a7b1499fe7cde71fdf85bef +Author: Marek Černocký <marek@manet.cz> +Date: Thu Sep 8 08:08:28 2011 +0200 + + Updated Czech translation + + po/cs.po | 55 +++++++++++++++++++++++++++++-------------------------- + 1 file changed, 29 insertions(+), 26 deletions(-) + +commit e52bbca7472506fde6fab85d1557f96077576502 +Author: dmustieles <daniel.mustieles@gmail.com> +Date: Wed Sep 7 18:37:28 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 7d99670872543d0406e5f96d8802d4692f987710 +Author: Fran Dieguez <fran@openhost.es> +Date: Wed Sep 7 02:32:09 2011 +0200 + + Updated galician translations + + po/gl.po | 54 ++++++++++++++++++++++++++++-------------------------- + 1 file changed, 28 insertions(+), 26 deletions(-) + +commit c05fe36f1fc35ed471874b1d86e2950bdc9b9dc1 +Author: Duarte Loreto <happyguy_pt@hotmail.com> +Date: Wed Sep 7 00:38:08 2011 +0100 + + Updated Portuguese translation + + po/pt.po | 478 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 263 insertions(+), 215 deletions(-) + +commit a2c0cb2b4a1604b167e85379cd031b2d217c5408 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Wed Sep 7 01:42:50 2011 +0300 + + Updated Belarusian translation. + + po/be.po | 46 +++++++++++++++++++++------------------------- + 1 file changed, 21 insertions(+), 25 deletions(-) + +commit 09498dec180c0b21b9611e5b3a694348dc7a01cd +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Tue Sep 6 22:25:14 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 98 ++++++++++++++++++++++++++++------------------------------- + 1 file changed, 47 insertions(+), 51 deletions(-) + +commit 9b6afdb4bec2b4f8dd86c9938f41e2c19563ddf2 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Tue Sep 6 21:54:44 2011 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 326 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 162 insertions(+), 164 deletions(-) + +commit 0ec193f55cd3dafc0031ad3492e0997abea73699 +Author: Aurimas Černius <aurisc4@gmail.com> +Date: Tue Sep 6 22:43:47 2011 +0300 + + Updated Lithuanian translation + + po/lt.po | 556 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 328 insertions(+), 228 deletions(-) + +commit 84c2207e8dabf2f2fc7a40e016ea2102edb7c61c +Author: Mario Blättermann <mariobl@gnome.org> +Date: Tue Sep 6 21:45:06 2011 +0200 + + [l10n] Updated German doc translation + + help/de/de.po | 2975 +++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 1828 insertions(+), 1147 deletions(-) + +commit 0689f4fd4e6356b9dfd514514927e62cec4bacd8 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Tue Sep 6 20:39:37 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 51 +++++++++++++++++++++++++++------------------------ + 1 file changed, 27 insertions(+), 24 deletions(-) + +commit 41e25b719427e874acd5b873db412f0b471d2a54 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Sep 6 12:51:27 2011 +0300 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b5c93640428128cb56dc210c12c4ac271b912a6f +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Sep 6 12:39:21 2011 +0300 + + Prepare for release 3.1.91 + + NEWS | 30 ++++++++++++++++++++++++++++++ + 1 file changed, 30 insertions(+) + +commit 2bb55b6f0ede9fc6d9939c156cef3e46b7fcb6ef +Author: Jorge González <aloriel@mail.com> +Date: Tue Sep 6 11:02:03 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 142 +++++++++++++++++++--------------------------------------- + 1 file changed, 46 insertions(+), 96 deletions(-) + +commit b0f3e02e4ad8c25806cc18fd3c2519567d4692aa +Author: Arash Mousavi <amousavi@src.gnome.org> +Date: Tue Sep 6 12:18:56 2011 +0430 + + Updated Persian translation + + po/fa.po | 93 ++++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 52 insertions(+), 41 deletions(-) + +commit 3c80004909cd27d58532c7c6daa4f39ba3f062e2 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Tue Sep 6 06:06:43 2011 +0200 + + Updated Spanish translation + + po/es.po | 59 +++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 33 insertions(+), 26 deletions(-) + +commit 8159bdfcb279dcdb271e5d5ba259e7547d80a925 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Tue Sep 6 05:43:24 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 1729 ++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 1158 insertions(+), 571 deletions(-) + +commit 0240c070bd668c1e6310f5414786fdeee2196721 +Author: Phil Bull <philbull@gmail.com> +Date: Tue Sep 6 01:52:29 2011 +0100 + + [help] Final tweak to help to remove old images and fix some placement/text issues + + help/C/figures/eog-bestfit.png | Bin 58521 -> 0 bytes + help/C/figures/eog-enlarge.png | Bin 86246 -> 0 bytes + help/C/figures/eog-normalsize.png | Bin 75456 -> 0 bytes + help/C/figures/eog-shrink.png | Bin 86037 -> 0 bytes + help/C/figures/eog-toolbar-default.png | Bin 13510 -> 0 bytes + help/C/format-change.page | 3 +++ + help/C/plugin-send-by-mail.page | 5 +++-- + 7 files changed, 6 insertions(+), 2 deletions(-) + +commit 3b4f3df363ab23802deab7dba56842b999f1a2ba +Author: Phil Bull <philbull@gmail.com> +Date: Tue Sep 6 01:44:31 2011 +0100 + + [help] Finish reviewing all help topics. Help is now frozen and ready for translators + + help/C/copy-paste.page | 2 +- + help/C/index.page | 2 +- + help/C/plugin-postr.page | 56 +++++++++------- + help/C/plugin-send-by-mail.page | 31 +++++---- + help/C/plugin-slideshow-shuffle.page | 18 +++--- + help/C/plugin-zoom-width.page | 18 ++++-- + help/C/plugins.page | 75 +++++++++++++--------- + help/C/preferences.page | 121 +++++++++++++++++++++-------------- + help/C/print.page | 55 ++++++++++------ + help/C/rename-multiple.page | 99 +++++++++++++++------------- + help/C/slideshow.page | 33 ++++++---- + help/C/toolbar.page | 70 ++++++++++---------- + help/C/view.page | 94 +++++++++++++++------------ + help/C/zoom.page | 67 ++++++++----------- + 14 files changed, 416 insertions(+), 325 deletions(-) + +commit a854909b65a9e4dd9fb772c913771bfa4e841221 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sun Sep 4 20:17:54 2011 -0400 + + Changed user visible strings to use generic app name. + + This patch fixes bug #658152. + + data/eog-preferences-dialog.ui | 2 +- + src/eog-file-chooser.c | 2 +- + src/eog-util.c | 2 +- + src/eog-window.c | 6 +++--- + src/main.c | 4 ++-- + 5 files changed, 8 insertions(+), 8 deletions(-) + +commit a2d154cc511a31004387637ecf3c072ef6c432f5 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Mon Sep 5 21:04:32 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 109 +++++++++++++++++----------------------------------------- + 1 file changed, 32 insertions(+), 77 deletions(-) + +commit 819e0db3cb7912da2bc05e38d06c98e8dad9afbb +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Mon Sep 5 20:16:51 2011 +0200 + + Updated Dutch translation by Wouter Bolsterlee + + po/nl.po | 426 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 237 insertions(+), 189 deletions(-) + +commit 71fbe59351f034dd90ea7287f0396b513990004e +Author: dmustieles <daniel.mustieles@gmail.com> +Date: Mon Sep 5 18:28:23 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 75 ++++++++++++++++++++++++++--------------------------------- + 1 file changed, 33 insertions(+), 42 deletions(-) + +commit 16a7ceaeb676cfc9311004c55221463fd844e52a +Author: Jorge González <aloriel@mail.com> +Date: Mon Sep 5 16:55:16 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 122 +++++++++++++++++++++++++--------------------------------- + 1 file changed, 52 insertions(+), 70 deletions(-) + +commit 4b82e8755a48023dbe02b4a2e109d18b96804a8d +Author: Jorge González <aloriel@mail.com> +Date: Mon Sep 5 13:19:53 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 1453 +++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 951 insertions(+), 502 deletions(-) + +commit 4fe6977f4b6370623aca1302568e9371d4345809 +Author: Phil Bull <philbull@gmail.com> +Date: Mon Sep 5 02:17:26 2011 +0100 + + [help] Full review of many help topics, settings some to status=final (ready for translators) + + help/C/bug-filing.page | 20 +++--- + help/C/commandline.page | 2 +- + help/C/copy-paste.page | 13 ++-- + help/C/default.page | 42 +++++++----- + help/C/desktop-background.page | 26 ++++--- + help/C/edit.page | 47 ++++++++----- + help/C/flip-rotate.page | 35 ++++++---- + help/C/format-change.page | 106 ++++++++++++++++------------- + help/C/formats-save.page | 6 +- + help/C/formats-view.page | 14 ++-- + help/C/index.page | 8 +-- + help/C/introduction.page | 13 ++-- + help/C/open.page | 59 ++++++---------- + help/C/plugin-exif-digital.page | 82 +++++++++++++++++----- + help/C/plugin-fullscreen-double-click.page | 22 +++--- + help/C/plugin-python-console.page | 29 ++++++-- + help/C/shortcuts.page | 9 ++- + 17 files changed, 311 insertions(+), 222 deletions(-) + +commit 3c7f69a8700e41871548fd3dee5c112ce504a527 +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Sun Sep 4 20:28:14 2011 +0200 + + Updated French translation + + po/fr.po | 280 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 142 insertions(+), 138 deletions(-) + +commit 106c9b1c7e6a0ac617361e0be7047d75902cc855 +Author: Fran Dieguez <fran@openhost.es> +Date: Sun Sep 4 18:48:36 2011 +0200 + + Updated galician translations + + po/gl.po | 283 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 144 insertions(+), 139 deletions(-) + +commit cf12dd4c76fe464bdc510990142dfc6130d271c7 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Sun Sep 4 18:42:02 2011 +0300 + + Updated Belarusian translation. + + po/be.po | 322 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 163 insertions(+), 159 deletions(-) + +commit 63838593a1bbfffff53744b54077c007377f9552 +Author: Marek Černocký <marek@manet.cz> +Date: Sun Sep 4 11:47:07 2011 +0200 + + Updated Czech translation + + po/cs.po | 292 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 146 insertions(+), 146 deletions(-) + +commit be4b4d9dff06fdb6523af400dc44dafedca4e8c8 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sun Sep 4 10:45:11 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 843 +++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 447 insertions(+), 396 deletions(-) + +commit 1371de9d6621d114184ac4c82fccb01bcb0b7184 +Author: Ryan Lortie <desrt@desrt.ca> +Date: Sat Sep 3 21:14:12 2011 -0400 + + help: Update the revision information + + Mark all pages as candidates for 3.2, last reviewed today. + + help/C/bug-filing.page | 3 +-- + help/C/commandline.page | 2 +- + help/C/copy-paste.page | 3 +-- + help/C/default.page | 3 +-- + help/C/desktop-background.page | 3 +-- + help/C/edit.page | 3 +-- + help/C/flip-rotate.page | 3 +-- + help/C/format-change.page | 3 +-- + help/C/formats-save.page | 3 +-- + help/C/formats-view.page | 3 +-- + help/C/index.page | 3 +-- + help/C/introduction.page | 3 +-- + help/C/open.page | 3 +-- + help/C/plugin-exif-digital.page | 3 +-- + help/C/plugin-fullscreen-double-click.page | 3 +-- + help/C/plugin-postr.page | 3 +-- + help/C/plugin-python-console.page | 3 +-- + help/C/plugin-send-by-mail.page | 3 +-- + help/C/plugin-slideshow-shuffle.page | 3 +-- + help/C/plugin-zoom-width.page | 3 +-- + help/C/plugins.page | 3 +-- + help/C/preferences.page | 3 +-- + help/C/print.page | 3 +-- + help/C/rename-multiple.page | 3 +-- + help/C/shortcuts.page | 2 +- + help/C/slideshow.page | 3 +-- + help/C/toolbar.page | 3 +-- + help/C/view.page | 3 +-- + help/C/zoom.page | 3 +-- + 29 files changed, 29 insertions(+), 56 deletions(-) + +commit b12d9a8f2707bb3686d93168c67e5a3e435f4482 +Author: Ryan Lortie <desrt@desrt.ca> +Date: Sat Sep 3 21:11:57 2011 -0400 + + help: remove titlecasing from <title> + + help/C/commandline.page | 2 +- + help/C/index.page | 4 ++-- + help/C/plugin-postr.page | 2 +- + help/C/plugin-python-console.page | 2 +- + help/C/plugin-slideshow-shuffle.page | 2 +- + help/C/preferences.page | 4 ++-- + help/C/shortcuts.page | 6 +++--- + help/C/zoom.page | 2 +- + 8 files changed, 12 insertions(+), 12 deletions(-) + +commit 3e9df5b44432a8299611954e03395b30329e19c1 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Sep 3 19:04:56 2011 -0400 + + [help] s/Eye of GNOME/image viewer + + help/C/bug-filing.page | 2 +- + help/C/commandline.page | 2 +- + help/C/plugin-python-console.page | 2 +- + help/C/plugins.page | 2 +- + 4 files changed, 4 insertions(+), 4 deletions(-) + +commit 4d473cb7551e15669ff4c26be9af1e92a15fde5e +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Sun Sep 4 06:44:13 2011 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 438 ++++++++++++++++++++++++++++++++++-------------------------- + po/zh_TW.po | 438 ++++++++++++++++++++++++++++++++++-------------------------- + 2 files changed, 492 insertions(+), 384 deletions(-) + +commit 4144f39b38ea627532c3c74d7cddc04ab7f09006 +Author: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> +Date: Sat Sep 3 23:41:21 2011 +0300 + + Updated Finnish translation + + po/fi.po | 332 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 169 insertions(+), 163 deletions(-) + +commit a70ddd95138f537d7ebee123d49f5700b3be133d +Author: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> +Date: Sat Sep 3 23:33:54 2011 +0300 + + Updated Finnish translation by Jiri Grönroos imported from Launchpad + + po/fi.po | 1037 +++++++++++++++++++++----------------------------------------- + 1 file changed, 353 insertions(+), 684 deletions(-) + +commit 64584d42bfc7967bdfc4c9dd512cb32ea1e695cf +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Sep 3 15:56:31 2011 -0400 + + [help] replaced custom list of section links w/ links type="section" + + help/C/preferences.page | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit 89c153d2c9c0611fd5d696819c5c925b33405355 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Sep 3 15:46:37 2011 -0400 + + [help] plugins.page: added experimental if as per SM + + help/C/plugins.page | 13 +++++++++++-- + 1 file changed, 11 insertions(+), 2 deletions(-) + +commit 222e9bfff911de83675b21b986ee87b1d175e47e +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Sep 3 15:24:14 2011 -0400 + + [help] plugins.page: added install link for eog-plugins package. + + help/C/plugins.page | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit 673bad9c113f363933c58c2ea9753a4c18b01692 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Sep 3 14:56:29 2011 -0400 + + [help] s/slide show/slideshow + + help/C/preferences.page | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 54013af60eafe9e7d66ae911300e4fe8dfc0b0de +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Sep 3 14:47:07 2011 -0400 + + [help] removed links from descriptions. + + help/C/flip-rotate.page | 4 +--- + help/C/format-change.page | 3 +-- + help/C/open.page | 4 +--- + help/C/view.page | 2 +- + 4 files changed, 4 insertions(+), 9 deletions(-) + +commit 3916dadc746a348a84f8faac981ec38b15edb9ba +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Sep 3 14:33:07 2011 -0400 + + [help] Tweek title of edit.page + + help/C/edit.page | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit e50f2d9111eb7bf7154d76ce33685885a5c86cff +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Sep 3 20:31:59 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 65 +++++++------ + po/es.po | 296 +++++++++++++++++++++++++++++----------------------------- + 2 files changed, 187 insertions(+), 174 deletions(-) + +commit 4adaa7c7cfd63288eb70a876351063377f26649d +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Sep 3 14:29:34 2011 -0400 + + [help] drop style="task" and add seaalso link. + + help/C/formats-save.page | 2 +- + help/C/formats-view.page | 3 ++- + 2 files changed, 3 insertions(+), 2 deletions(-) + +commit 92b63064b0d219c7a52df07739638f004f9b6ba6 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Sep 3 12:16:25 2011 -0400 + + [help/C/figures] added proper sized icon images. + + Also, now using 16X16 px icon for trail link title. + + help/C/figures/eog-logo.png | Bin 0 -> 2330 bytes + help/C/figures/eog-trail.png | Bin 0 -> 732 bytes + help/C/figures/eog.png | Bin 2092 -> 0 bytes + help/C/index.page | 4 ++-- + 4 files changed, 2 insertions(+), 2 deletions(-) + +commit b58d6c58d229629f30fdaa75171fb9c263bcb10f +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Sep 3 12:06:02 2011 -0400 + + [help] Set a text-only default link title. + + This makes it so you don't see the logo in the More About + listing. + + help/C/index.page | 1 + + 1 file changed, 1 insertion(+) + +commit 781e314d5af64fb94c3b5da8c99a8215b10e72dc +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Sep 3 17:28:10 2011 +0200 + + Add translator context and comment to a split sentence + + The sentence has a GtkSpinButton injected in the middle making it + difficult to translate for some languages, as one part of the label + could end up empty. This adds translation contexts to the labels to + avoid possible ambiguities and an expaining comment. + + https://bugzilla.gnome.org/show_bug.cgi?id=654548 + + data/eog-preferences-dialog.ui | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 36aeae3a5577c7ec911a35649b5c1e5d68a6c9e7 +Author: Arash Mousavi <amousavi@src.gnome.org> +Date: Wed Aug 31 17:15:19 2011 +0430 + + Updated Persian translation + + po/fa.po | 433 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 241 insertions(+), 192 deletions(-) + +commit 516c0eb006782b17ec87bd7e9d5ea6ef3c9b8407 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Aug 30 19:50:29 2011 +0300 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b9a6f59eb5a55021451559a1a3b0d9c195b2f6cb +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Aug 30 19:30:40 2011 +0300 + + Prepare for release 3.1.90 + + NEWS | 14 ++++++++++++++ + configure.ac | 2 +- + 2 files changed, 15 insertions(+), 1 deletion(-) + +commit eb8e0e991ef6b47af8fdc629cbc282b93fbcf6d4 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Aug 30 19:27:02 2011 +0300 + + Decrease the fullscreen toolbar timeout to 2 seconds + + This is what popular fullscreen multimedia applications use, + so let's give it a try. + + src/eog-window.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 58c5b156332ff8be453a556b912167f05d37abf9 +Author: Og B. Maciel <ogmaciel@gnome.org> +Date: Thu Aug 25 09:47:43 2011 -0400 + + Updated Brazilian Portuguese translation. + + po/pt_BR.po | 404 +++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 225 insertions(+), 179 deletions(-) + +commit 655e57e45787594dbb0bb791159cf9f3c9ba5335 +Author: Alexander Shopov <ash@kambanaria.org> +Date: Mon Aug 22 07:52:28 2011 +0300 + + Updated Bulgarian translation + + po/bg.po | 385 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 212 insertions(+), 173 deletions(-) + +commit 134f15389db1054256d2dd320c35a6c6a0fec099 +Author: A S Alam <aalam@users.sf.net> +Date: Sun Aug 21 09:08:12 2011 +0530 + + update Punjabi Translation + + po/pa.po | 412 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 231 insertions(+), 181 deletions(-) + +commit 43febb8bab8a3769d0abed90edb809e9d9d19f38 +Author: Abduxukur Abdurixit <abdurixit@gmail.com> +Date: Fri Aug 19 20:31:09 2011 +0200 + + Added UG translation + + po/ug.po | 357 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 195 insertions(+), 162 deletions(-) + +commit 80e1ab88a311f244243cfb652e3a4cc8f44051a9 +Author: Andika Triwidada <andika@gmail.com> +Date: Thu Aug 18 15:06:18 2011 +0700 + + Updated Indonesian translation + + po/id.po | 646 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 299 insertions(+), 347 deletions(-) + +commit 06d3599a3828851bb7a2753f67c955983ce106a9 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 15 22:15:05 2011 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 6e0f7baa94542ea331f1fd7f84b33f99b964dc02 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 15 22:08:26 2011 +0200 + + Prepare for release 3.1.5 + + NEWS | 32 ++++++++++++++++++++++++++++++++ + 1 file changed, 32 insertions(+) + +commit 91807c0986a4ddedfb5602d07ddc07300342db42 +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Fri Aug 12 20:15:11 2011 +0700 + + Updated Thai translation. + + po/th.po | 391 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 216 insertions(+), 175 deletions(-) + +commit 32f566c06310c881fe93cebdd15887ee3f03b950 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Aug 9 22:15:23 2011 +0200 + + Enable fullscreen plugin by default + + The effect it causes is somewhat expected by users. + + https://bugzilla.gnome.org/show_bug.cgi?id=552537 + + data/org.gnome.eog.gschema.xml.in.in | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a3b769506abbbf7b24547b95c9c99349e99d44c0 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Aug 9 21:57:35 2011 +0200 + + Update EogWindow's image handle when selecting already loaded images + + https://bugzilla.gnome.org/show_bug.cgi?id=655889 + + src/eog-window.c | 3 +++ + 1 file changed, 3 insertions(+) + +commit 40919ebb2ce1fd70edae61c7b578c6a7ce8ef432 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Aug 2 23:18:19 2011 +0200 + + Fix bogus usage of eog_image_has_data() + + This tries to fix cases where it apparently wasn't taken into account + that if you use the function with multiple test flags all tests must be + successful or the result will be negative. + + https://bugzilla.gnome.org/show_bug.cgi?id=655794 + + src/eog-image.c | 1 + + src/eog-jobs.c | 49 +++++++++++++++++++++++++++++++++++++++++-------- + src/eog-window.c | 6 +++--- + 3 files changed, 45 insertions(+), 11 deletions(-) + +commit ffd057a0be9610b49f2dc718060c82c4ee1065be +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Aug 2 22:02:17 2011 +0200 + + Fix test selection handling in eog_image_has_data() + + Due to a wrong value negation the function was only checking one of the + selected data types and skipping the following tests. + Spotted by Fabian Sturm. + + https://bugzilla.gnome.org/show_bug.cgi?id=655794 + + src/eog-image.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit aedcf257b48e000771a0aff4be182b4ffbc76c9b +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Mon Aug 8 16:23:42 2011 +0200 + + Updated French translation + + po/fr.po | 461 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 219 insertions(+), 242 deletions(-) + +commit 6ee994aa29b8b2f7e9f582004bcd10cc3b7b5bd2 +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Mon Aug 8 16:00:20 2011 +0200 + + Updated French doc translation + + help/fr/fr.po | 3326 ++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 2006 insertions(+), 1320 deletions(-) + +commit d0c947fbe5177b86ef07f57bc57c93df8882ffae +Author: 朱涛 <bill_zt@sina.com> +Date: Mon Aug 8 14:18:31 2011 +0800 + + update Simplified Chinese (zh_CN) translation + + po/zh_CN.po | 28 ++++++++++------------------ + 1 file changed, 10 insertions(+), 18 deletions(-) + +commit fc0a3b92322dcef3e01af47ed80ed9ef6b44b0af +Author: Fran Dieguez <fran@openhost.es> +Date: Sun Aug 7 16:10:05 2011 +0200 + + Updated Galician translations + + po/gl.po | 380 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 206 insertions(+), 174 deletions(-) + +commit e8bc6ec7fcd5bc36f46f8ece6003351048899b34 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Sat Aug 6 15:56:37 2011 +0300 + + Updated Hebrew translation. + + po/he.po | 384 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 208 insertions(+), 176 deletions(-) + +commit 09abf3e4778b7a95c4f05c236075c85354513a37 +Author: Mario Blättermann <mariobl@gnome.org> +Date: Thu Aug 4 11:48:30 2011 +0200 + + [l10n] Updated German translation + + po/de.po | 67 +++++++++++++++++++++++++++++----------------------------------- + 1 file changed, 30 insertions(+), 37 deletions(-) + +commit 4dad7a3aafcd37e15d5cc16e72467165927e606d +Author: Hendrik Knackstedt <kn.hendrik@gmail.com> +Date: Thu Aug 4 11:46:23 2011 +0200 + + [l10n] Updated German translation + + po/de.po | 378 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 211 insertions(+), 167 deletions(-) + +commit d4c4b19c4de241100c115f39750b9298f2c82ca1 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Tue Aug 2 01:36:41 2011 +0200 + + Updated Hungarian translation by Balázs Meskó <meskobalazs at gmail dot com> + + po/hu.po | 393 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 217 insertions(+), 176 deletions(-) + +commit 14f5eea21885434ee217d45edbf36f337721e3fb +Author: Yuri Kozlov <yuray@komyakino.ru> +Date: Mon Aug 1 00:07:00 2011 +0400 + + Updated Russian translation + + po/ru.po | 639 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 387 insertions(+), 252 deletions(-) + +commit 203441ceba74e45860e3fbd99f61aac37c9783b6 +Author: Julius Wong <villahwong@gmail.com> +Date: Sun Jul 31 17:50:24 2011 +0000 + + Update Simplified Chinese translation. + + po/zh_CN.po | 434 ++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 245 insertions(+), 189 deletions(-) + +commit 5d411992869be7a1f188576337ffe0ecc2cc684c +Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> +Date: Sat Jul 30 19:16:23 2011 +0200 + + Updated Slovenian translation + + po/sl.po | 40 ++++------------------------------------ + 1 file changed, 4 insertions(+), 36 deletions(-) + +commit 2f5e3244c3320615ea5e065d4f98e7f71e4f1a92 +Author: Priscilla Mahlangu <priny@translate.org.za> +Date: Fri Jul 29 22:23:11 2011 +0200 + + Updated translation for Zulu (zu) + + po/zu.po | 1866 +++++++++++++++++++++++++++++++++++++++++++++++--------------- + 1 file changed, 1412 insertions(+), 454 deletions(-) + +commit 8306876e36bc85f4a5f96a837c73558bbf1b0b9e +Author: Daniel Nylander <po@danielnylander.se> +Date: Fri Jul 29 09:58:29 2011 +0200 + + Updated Swedish translation + + po/sv.po | 643 ++++++++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 451 insertions(+), 192 deletions(-) + +commit 4833c4d01df0bca99dd2636e60f33bbb8d13747c +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 27 21:18:20 2011 +0200 + + Use a simple GtkLabel for the image counter in the statusbar + + This was an extra GtkStatusbar before. This is not needed anymore as the + resize handle now works independently from the GtkStatusbar. Also the + GtkLabel seems to require less horizontal space in the statusbar. + + src/eog-statusbar.c | 18 ++++++++---------- + 1 file changed, 8 insertions(+), 10 deletions(-) + +commit 0773b4ef16a95eb071e9c40c173ea73bfc6ca479 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 27 14:30:18 2011 +0200 + + Render compressed SVGs natively as well + + These have a different mime-type which didn't trigger the native + renderer before and thus were rendered and pixelated using GdkPixbuf. + + https://bugzilla.gnome.org/show_bug.cgi?id=655377 + + src/eog-image.c | 11 ++++++++++- + 1 file changed, 10 insertions(+), 1 deletion(-) + +commit 2b71e1f53fd4f799d3b3f3de5c7d78996da9679d +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 25 21:57:19 2011 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit baf90081de7cf4c76c59a56aae70e7301174573a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 25 21:49:10 2011 +0200 + + Prepare for release 3.1.4 + + NEWS | 31 +++++++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 32 insertions(+), 1 deletion(-) + +commit d78862c586b133cffa20b900a6298cb9310f6291 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Mon Jul 25 11:04:19 2011 +0300 + + Updated Belarusian translation. + + po/be.po | 1321 +++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 698 insertions(+), 623 deletions(-) + +commit 3812bc21f5ec30b32974dcbd5f86ca2685f9aa33 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jul 23 20:04:03 2011 +0200 + + Remove obsoleted compatibility code for GTK+-2.90.5 and earlier + + We have a dependency on at least version 3.0.2 already. + + src/eog-properties-dialog.c | 4 ---- + 1 file changed, 4 deletions(-) + +commit 8a66150f15adb8fc1ad2bf624cfbb6a6b1997599 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jul 23 19:18:38 2011 +0200 + + Make eog-error-message-area.h a private header + + It's content is not introspectable at the moment and plugins cannot use + it anyway as the function to show it in an EogWindow isn't public. + + src/Makefile.am | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 399618e04391632a9ba07c2d9b176b2bfe5a7db9 +Author: José Aliste <jaliste@src.gnome.org> +Date: Mon Jun 27 14:30:54 2011 -0400 + + toolbareditor: Fix the removal of items by DnD. + + If the 'window-dragging' property of GtkToolbar is set (as it is in adwaita) + then the Toolbar starts the drag of the window on 'button-press' event. + We prevent this by connecting a handler for 'button-press' which prevents + the handler of the toolbar to be run while in edit mode. + + Fixes bug #647265 + + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 32 +++++++++++++++++++++++ + 1 file changed, 32 insertions(+) + +commit 0c82590685da3ca6e657615e0434cd86c88cc67c +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jul 23 16:12:45 2011 +0200 + + Ensure UI action sensitivity is set at least once + + Beforehand empty windows had all UI actions active. + Activation could then spawn critical warnings. This was probably caused + by the switch to GtkApplication. + + src/eog-window.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit 4bb49b5cbfb764ba57f4a4980c58b52f6046ed58 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jul 21 15:50:00 2011 +0200 + + Fix memory leak and optimize the corresponding funcion's code + + src/eog-image.c | 40 +++++++++++++++++++--------------------- + 1 file changed, 19 insertions(+), 21 deletions(-) + +commit 7a3086d782680f22e99631ff205440b37606397e +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jul 21 15:36:29 2011 +0200 + + Drop some unneeded warnings + + These were not exactly critical enough for console output. + They were causing memory leaks as well. + Drop them in two cases and convert one to a debug message. + + src/eog-image.c | 10 ++-------- + 1 file changed, 2 insertions(+), 8 deletions(-) + +commit 71c7a069086af234a5ab882373e0e824b34d8f7d +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jul 21 15:17:40 2011 +0200 + + Remove leftover DBus service description file + + It's not needed anymore after switching to GtkApplication. + + src/eog-application-service.xml | 23 ----------------------- + 1 file changed, 23 deletions(-) + +commit 736215c0b02dbf44d8c15bed907907aa1ba0ef93 +Author: Tommi Vainikainen <thv@iki.fi> +Date: Thu Jul 21 07:30:16 2011 +0300 + + Updated Finnish translation + + po/fi.po | 695 ++++++++++++++++++++++++++------------------------------------- + 1 file changed, 291 insertions(+), 404 deletions(-) + +commit a0283f553cbc68359f64b0b363c97350d680cce6 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Tue Jul 19 22:26:46 2011 +0200 + + Updated Slovenian translation + + po/sl.po | 427 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 231 insertions(+), 196 deletions(-) + +commit 6a96a305f97e1a90850743868b9e9042cf4977ce +Author: Marek Černocký <marek@manet.cz> +Date: Mon Jul 18 21:26:11 2011 +0200 + + Updated Czech translation + + po/cs.po | 334 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 183 insertions(+), 151 deletions(-) + +commit 73a256e5f14a8e3e9832a7e9ddd64e686e2267d7 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Mon Jul 18 13:24:00 2011 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 358 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 192 insertions(+), 166 deletions(-) + +commit 301520aec06654ca4372053b962c0556c1760230 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sun Jul 17 19:44:05 2011 +0200 + + Updated Spanish translation + + po/es.po | 49 +++++++++++++++++++++++++++++++++++-------------- + 1 file changed, 35 insertions(+), 14 deletions(-) + +commit e046f8163d38c5830eef40e42970295a4dd10eae +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 17 15:49:52 2011 +0200 + + Place GPS Exif tags into their own subcategory + + src/eog-exif-details.c | 16 +++++++++------- + 1 file changed, 9 insertions(+), 7 deletions(-) + +commit 3e4bc1aad5bf9236705bdb049ed017f374e27552 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 17 15:47:28 2011 +0200 + + Reformat Exif tags for GPS position to be better understandable + + libexif's formatting of these tags is not nice to read. + Reformatted are latitude and longitude values and their reference points. + + https://bugzilla.gnome.org/show_bug.cgi?id=627185 + + src/eog-exif-details.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++-- + 1 file changed, 91 insertions(+), 3 deletions(-) + +commit 8574b4ba6e6211b5f1a7e1fade6e02da2b8703fd +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 17 13:57:33 2011 +0200 + + Make sure GPS Exif tags are named and ordered correctly + + Some GPS tag IDs overlap with IDs from other IFDs. + Specifically check for the GPS IFD and order the entries accordingly. + Also respect the IFD when determining the tag's title. + + https://bugzilla.gnome.org/show_bug.cgi?id=627185 + + src/eog-exif-details.c | 11 +++++++++-- + 1 file changed, 9 insertions(+), 2 deletions(-) + +commit 1d0672a42f5bbaedb0bc424ea152c246668d36da +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sun Jul 17 12:17:58 2011 +0200 + + Updated Spanish translation + + po/es.po | 330 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 171 insertions(+), 159 deletions(-) + +commit 3da565496c3e9aa623d6287fa1c1aea5158b3f61 +Author: Javier Sánchez <jsanchez@deskblue.com> +Date: Fri Jul 15 13:09:39 2011 +0200 + + Fixed Bug 615376 - if saving an image fails it's done silently. + + - Refactored EogErrorMessageArea to include new buttons like CANCEL, + RELOAD and SAVEAS. + - Added new custom responses to EogErrorMessageArea for new buttons. + - Refactored EogCloseConfirmationDialog to include new buttons like + CLOSE, CANCEL, SAVE and SAVE AS. + - Added new custom responses to EogCloseConfirmationDialog for new + buttons. + - Refactored EogWindow to handle new EogErrorMessageArea and + EogCloseConfirmationDialog responses. + - Refactored EogImage to include write permission verification in + SAVE and SAVE AS processes. + - Added a new method to EogImage API called eog-image-is-file-writable + to determine is when the user has write permission on the image + file. + + https://bugzilla.gnome.org/show_bug.cgi?id=615376 + + src/eog-close-confirmation-dialog.c | 220 +++++++++++++++++++++--------------- + src/eog-close-confirmation-dialog.h | 31 ++++- + src/eog-error-message-area.c | 96 +++++++++++++--- + src/eog-error-message-area.h | 24 +++- + src/eog-image.c | 106 ++++++++++++++++- + src/eog-image.h | 3 + + src/eog-jobs.c | 9 +- + src/eog-window.c | 209 +++++++++++++++++++++++++--------- + 8 files changed, 525 insertions(+), 173 deletions(-) + +commit aec0f0874476c637a5a1962dbf2b1ca6ec3c0b65 +Author: Marek Černocký <marek@manet.cz> +Date: Fri Jul 15 18:45:08 2011 +0200 + + Updated Czech translation + + po/cs.po | 378 ++++++++++++++++++++++++--------------------------------------- + 1 file changed, 142 insertions(+), 236 deletions(-) + +commit 9443cd0e7d9d9081f203f015da5aa3243bb8da3d +Author: Rudolfs Mazurs <rudolfs.mazurs@gmail.com> +Date: Tue Jul 12 15:10:14 2011 +0300 + + Updated Latvian translation. + + po/lv.po | 325 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 171 insertions(+), 154 deletions(-) + +commit b451cbdf01c27f48ce268ce580ccd313f25f7d63 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Thu Jul 7 23:02:57 2011 +0200 + + Added skeleton Hungarian translation + + help/hu/hu.po | 1995 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 1995 insertions(+) + +commit cd164bcda06485f9d587404d8eb9f1f538093fc8 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Thu Jul 7 23:02:39 2011 +0200 + + Added hu to DOC_LINGUAS + + help/Makefile.am | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit db1617dc71785fc2ebdcd225a920eb5c020cabf7 +Author: Abduxukur Abdurixit <abdurixit@gmail.com> +Date: Thu Jul 7 16:22:23 2011 +0200 + + Added UG translation + + po/ug.po | 3467 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 1740 insertions(+), 1727 deletions(-) + +commit b815367b007686ec6828fdcc0346f5e1ef625e53 +Author: Paul Seyfert <pseyfert@mathphys.fsk.uni-heidelberg.de> +Date: Mon Jul 4 21:25:47 2011 +0200 + + [l10n] Updated German translation + + po/de.po | 304 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 159 insertions(+), 145 deletions(-) + +commit aaedf86482f57b44ccd631c485b4498ca63a22b5 +Author: Muhammet Kara <muhammet.k@gmail.com> +Date: Sun Jun 26 03:37:04 2011 +0300 + + Updated Turkish translation file header + + po/tr.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 852ad4c4e8b0971a7a511b3e50190a0ca9c1f3c8 +Author: Muhammet Kara <muhammet.k@gmail.com> +Date: Sun Jun 26 02:46:06 2011 +0300 + + Updated Turkish translation + + po/tr.po | 278 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 144 insertions(+), 134 deletions(-) + +commit 1cc2606adac0d8a2b7428dbc17088b23810ca599 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jun 24 14:54:12 2011 +0200 + + Drop size-request signal callback for fullscreen toolbar + + Didn't work with GTK-3 and caused critical warnings when entering + fullscreen mode. Just removing the callback seems to be sufficient as + the toolbar's size request is set when entering fullscreen mode anyway. + + https://bugzilla.gnome.org/show_bug.cgi?id=653162 + + src/eog-window.c | 12 ------------ + 1 file changed, 12 deletions(-) + +commit 641143f5490f20f549cc897a94a1b51de3a749d0 +Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> +Date: Wed Jun 22 21:18:06 2011 +0200 + + Updated Slovenian translation + + help/sl/sl.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 16146d6bd0333e8d258db39c2e923e0757c488ad +Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> +Date: Wed Jun 22 21:13:37 2011 +0200 + + Updated Slovenian translation + + help/sl/sl.po | 3107 ++++++++++++++++++++++++++++++++++++++++++--------------- + 1 file changed, 2309 insertions(+), 798 deletions(-) + +commit 1e88937203b14f6bd83084b795eb775ba3328071 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Jun 15 10:21:42 2011 +0300 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ffdc7a28395e533f9732a6354eee62027f982972 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Jun 15 10:03:04 2011 +0300 + + Prepare for 3.1.2 release + + NEWS | 37 +++++++++++++++++++++++++++++++++++++ + 1 file changed, 37 insertions(+) + +commit 757699b9e5f963dd7d8be7779fc8ca00b7d336e7 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 12 17:07:35 2011 +0200 + + Remove spurious g_object_unref + + The released reference isn't owned by the job. + Could cause a segfault upon closing an EogWindow. + + src/eog-jobs.c | 2 -- + 1 file changed, 2 deletions(-) + +commit 0d3c812764252e7582d05147b2724c9e272d0e7b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 12 13:03:28 2011 +0200 + + Fix critical warning when closing empty windows + + src/eog-window.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8e6a2e88f7cbfe267b34e8cb5eb1077ababdb135 +Author: Милош Поповић <gpopac@gmail.com> +Date: Sun Jun 12 04:23:41 2011 +0200 + + Revert "Updated Serbian translation" + + This reverts commit 652bfc1d9f3a4fd3b56ebe894fab5a837df9313b. + + po/sr.po | 767 +++++++++++++++++++++++++++++++++------------------------ + po/sr@latin.po | 767 +++++++++++++++++++++++++++++++++------------------------ + 2 files changed, 888 insertions(+), 646 deletions(-) + +commit 652bfc1d9f3a4fd3b56ebe894fab5a837df9313b +Author: Мирослав Николић <miroslavnikolic@rocketmail.com> +Date: Sun Jun 12 03:46:32 2011 +0200 + + Updated Serbian translation + + po/sr.po | 767 ++++++++++++++++++++++++--------------------------------- + po/sr@latin.po | 767 ++++++++++++++++++++++++--------------------------------- + 2 files changed, 646 insertions(+), 888 deletions(-) + +commit b42683d6dd343af62a2c9f893d18fdb46c6c4613 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sat Jun 11 17:37:00 2011 +0200 + + Updated Slovenian translation + + po/sl.po | 280 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 161 insertions(+), 119 deletions(-) + +commit 3d39587751ead63a5f6458ce6daf5dd1acf8165a +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Jun 9 22:33:30 2011 +0300 + + Port EogApplication to GtkApplication + + This removes the direct dependency on dbus and makes use of the + GApplication/GtkApplication facilities for uniqueness and activation. + Bump the glib requirement to 2.29.4, since we need + G_APPLICATION_NON_UNIQUE. + + https://bugzilla.gnome.org/show_bug.cgi?id=622876 + + configure.ac | 27 +------ + src/Makefile.am | 11 --- + src/eog-application.c | 214 ++++++++++++++++++++------------------------------ + src/eog-application.h | 15 +--- + src/eog-util.c | 2 - + src/eog-util.h | 2 - + src/eog-window.c | 21 +---- + src/main.c | 116 +++------------------------ + 8 files changed, 101 insertions(+), 307 deletions(-) + +commit 97b087796ed130f989a7af9fde9c630104e6ed62 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Thu Jun 9 13:57:17 2011 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 220 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 116 insertions(+), 104 deletions(-) + +commit ecd5bf02d8f227f3b1a38f42c164ccb3a970a583 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Jun 8 22:32:04 2011 +0300 + + Silent a unused-variable warning + + src/eog-image.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 8ac825bea9ce49e500efd8ed94bd3177b03f9731 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jun 8 20:58:29 2011 +0200 + + Use GdkPixbuf's "orientation" feature as fallback for autorotation + + Useful for formats where we don't support extracting the needed data + ourselves (e.g TIFF) and if eog is compiled without libexif. + + https://bugzilla.gnome.org/show_bug.cgi?id=548474 + https://bugzilla.gnome.org/show_bug.cgi?id=615114 + + src/eog-image-private.h | 2 +- + src/eog-image.c | 42 +++++++++++++++++++++++++++++++++--------- + src/eog-image.h | 2 -- + 3 files changed, 34 insertions(+), 12 deletions(-) + +commit bded0286f72bc9b01d3a73e329751e62212efdea +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Tue Jun 7 19:35:17 2011 -0400 + + help/C/index.page: added role attribute to title. + + help/C/index.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0609802455eee05eb25f417bdffbdd4240783986 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Mon Jun 6 11:20:47 2011 +0200 + + Updated Galician translations + + po/gl.po | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +commit 73dd35c815883bc00cfd7ce190ce10daefb28f41 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Mon Jun 6 00:29:53 2011 +0200 + + Updated Galician translations + + po/gl.po | 267 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 140 insertions(+), 127 deletions(-) + +commit 4c0b5c84dc4c5a6fce6285f492d5f3c1a8724f45 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 4 21:41:00 2011 +0200 + + Make the displayed EogImage a property of EogScrollView + + Besides the more obvious object orientation it also allows watch the + property for changes. Might be useful for plugins. + + https://bugzilla.gnome.org/show_bug.cgi?id=544068 + + src/eog-scroll-view.c | 42 ++++++++++++++++++++++++++++++++++++++++++ + src/eog-scroll-view.h | 2 ++ + 2 files changed, 44 insertions(+) + +commit 682e323c878fffb14cb5f425218ca242cb5b392b +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Sat Jun 4 13:43:07 2011 +0300 + + Updated Hebrew translation. + + po/he.po | 218 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 115 insertions(+), 103 deletions(-) + +commit 0f9e861e10bacf1df50ddc344194b4bb3b09b1c5 +Author: krishnababu k <kkrothap@redhat.ocm> +Date: Sat Jun 4 02:18:54 2011 +0530 + + Updated Telugu Translations done by Praveen Illa + + po/te.po | 1380 +++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 735 insertions(+), 645 deletions(-) + +commit 1a948b3f5bb6dc5af8d407c8d7b9cc55cc47b6fa +Author: Carles Ferrando <carles.ferrando@gmail.com> +Date: Sun May 29 17:57:08 2011 +0200 + + [l10n]Updated Catalan (Valencian) translation + + po/ca@valencia.po | 696 +++++++++++++++++++++++++++++------------------------- + 1 file changed, 374 insertions(+), 322 deletions(-) + +commit d57936817e1738aaa6d359de45aeab7a48a280c8 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri May 27 19:30:01 2011 +0200 + + Use the result of librsvg's parser to generate pixel data out of SVGs + + Resolves problems with converting SVGs that use relative paths. + Also avoids the duplicate SVG parsing by gdk-pixbuf's SVG loader. + It's not the nicest code, but we need to split EogImage in + format-specific variants anyway. So, this can stay like this until then. + + https://bugzilla.gnome.org/show_bug.cgi?id=642725 + + src/eog-image.c | 81 ++++++++++++++++++++++++++++++++++++++------------------- + 1 file changed, 54 insertions(+), 27 deletions(-) + +commit 66357c088a72d3f9f61de292a2b4275ab425f23f +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sat May 21 09:30:50 2011 +0200 + + Updated Spanish translation + + po/es.po | 217 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 115 insertions(+), 102 deletions(-) + +commit f43d5933761437fce5af78e7da6dd78832d6fa63 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri May 20 12:12:50 2011 +0200 + + Rename "Open Containing Folder" to "Show Containing Folder" + + Makes it clearer what is meant and is less ambigious with eog's own + functionality to "Open" folders. + + src/eog-window.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 9df5fd43cc9cea9ded47953d22d82cfea1ace015 +Author: Akshay Gupta <kitallis@gmail.com> +Date: Fri May 20 12:07:19 2011 +0200 + + Add an "Open containing folder" command + + https://bugzilla.gnome.org/show_bug.cgi?id=650402 + + data/eog-toolbar.xml | 1 + + data/eog-ui.xml | 3 +++ + src/eog-window.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 58 insertions(+) + +commit 4247b716a9f1692dd1424dd0ba15109cf4a56385 +Author: Mario Blättermann <mariobl@gnome.org> +Date: Thu May 19 21:24:37 2011 +0200 + + Updated German doc translation + + help/de/de.po | 3303 ++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 1986 insertions(+), 1317 deletions(-) + +commit db0fe961f44d94f9029e4bb49a8e2692998d6b03 +Author: Christian Kirbach <Christian.Kirbach@googlemail.com> +Date: Sat May 14 00:15:20 2011 +0200 + + [l10n] Updated German help screen-shots + + help/de/figures/eog-bestfit.png | Bin 0 -> 67392 bytes + help/de/figures/eog-enlarge.png | Bin 0 -> 159779 bytes + help/de/figures/eog-normalsize.png | Bin 0 -> 69715 bytes + help/de/figures/eog-shrink.png | Bin 0 -> 135704 bytes + help/de/figures/eog-toolbar-default.png | Bin 0 -> 14272 bytes + help/de/figures/eog-toolbar-editor.png | Bin 0 -> 27765 bytes + help/de/figures/eog_save_as_window.png | Bin 24488 -> 0 bytes + help/de/figures/eog_start_window.png | Bin 10849 -> 0 bytes + help/de/figures/eog_toolbar_editor_window.png | Bin 23997 -> 0 bytes + help/de/figures/image-view-prefs.png | Bin 0 -> 35103 bytes + help/de/figures/multiple-convert.png | Bin 0 -> 27059 bytes + help/de/figures/multiple-rename-count.png | Bin 0 -> 27167 bytes + help/de/figures/plugin-send-by-mail.png | Bin 0 -> 60832 bytes + help/de/figures/plugins-all.png | Bin 0 -> 63999 bytes + help/de/figures/prefs-plugins-date.png | Bin 0 -> 29366 bytes + help/de/figures/prefs-plugins-fullscreen.png | Bin 0 -> 29281 bytes + help/de/figures/prefs-plugins.png | Bin 0 -> 29235 bytes + help/de/figures/slideshow-prefs.png | Bin 0 -> 23762 bytes + 18 files changed, 0 insertions(+), 0 deletions(-) + +commit 3997e9f8a230bdc09a857a0f5f7449a1d45ee2e8 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu May 12 20:18:04 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 10 +++++++--- + 1 file changed, 7 insertions(+), 3 deletions(-) + +commit 3a01b7679e727408b4f937ed8b9ddc61ab7461fb +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu May 12 20:15:32 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 158 +++++++++++++++++++++++++++++++++++++++++++++++++++++----- + 1 file changed, 146 insertions(+), 12 deletions(-) + +commit 1c3a5f6b0137de0c1e8829b4aa8e23a92c657082 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Wed May 11 22:32:12 2011 +0200 + + mallard: fix typo + + https://bugzilla.gnome.org/show_bug.cgi?id=649894 + + help/C/preferences.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 93803031ff5e2d128ad35662e834ef463c577555 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 9 22:46:43 2011 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit e910d6401ae2c0b30939be050e2ea2d5d3e129aa +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 9 22:40:31 2011 +0200 + + Prepare for release 3.1.1 + + NEWS | 45 +++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 45 insertions(+) + +commit 3a19a69723e630485a4010e8fb588e3763e182b3 +Author: Kristjan SCHMIDT <kristjan.schmidt@googlemail.com> +Date: Mon May 9 20:16:04 2011 +0200 + + Updated Esperanto translation + + po/eo.po | 885 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 485 insertions(+), 400 deletions(-) + +commit 385b4e448b74b0f0b1e3bf0e3e42e2e4d6d74730 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Mon May 9 19:38:23 2011 +0200 + + Updated Spanish translation + + po/es.po | 254 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 126 insertions(+), 128 deletions(-) + +commit 3adb22a9b66549a86fa6c59e17d99f1ad4e1df46 +Author: Joaquín Aramendía <samsagax@gmail.com> +Date: Mon May 9 19:27:33 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 1344 ++------------------------------------------------------- + 1 file changed, 39 insertions(+), 1305 deletions(-) + +commit d782906d89c51f6b4f749bece651a5efc8401c0e +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Mon May 9 08:49:41 2011 +0300 + + Updated Hebrew translation. + + po/he.po | 258 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 131 insertions(+), 127 deletions(-) + +commit 30f34a8df68a1263e69ecde76118d8a79da67a9f +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sun May 8 22:46:03 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 93 +++++++++++++++++++++++++++-------------------------------- + 1 file changed, 42 insertions(+), 51 deletions(-) + +commit 52811d0645d9b7979f85dd4970a788eee91463f7 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sun May 8 17:13:53 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 72 +++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 38 insertions(+), 34 deletions(-) + +commit d5d4550dae8ae295f1da76a1dd7e326d989002ac +Author: Mario Blättermann <mariobl@gnome.org> +Date: Wed May 4 21:22:13 2011 +0200 + + [doc] Fixed another typo + + help/C/formats-view.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 994c6d13fd5f38b32a9e3c185ebda4101076b68c +Author: Mario Blättermann <mariobl@gnome.org> +Date: Wed May 4 20:33:10 2011 +0200 + + [doc] Fixed some typos + + help/C/shortcuts.page | 2 +- + help/C/zoom.page | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit 8c9fafb30d85dbb87732faf5e1b764e3380830a7 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Wed May 4 19:44:13 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 101 ++++++++++++++++++++++++---------------------------------- + 1 file changed, 41 insertions(+), 60 deletions(-) + +commit eff2387978ebba5e6a1301d3daa1d23dd7a63355 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Wed May 4 11:17:31 2011 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 278 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 146 insertions(+), 132 deletions(-) + +commit f1095f58d479d70e7ccb42c3e024c91bce591c5c +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Tue May 3 23:07:14 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 980 ++++++++++++++++++++++++++++------------------------------ + 1 file changed, 465 insertions(+), 515 deletions(-) + +commit 9b10da30af255f532846fe2b5afc96fcbfc5c759 +Author: Muhammet Kara <muhammet.k@gmail.com> +Date: Tue May 3 09:08:26 2011 +0300 + + Updated Turkish translation + + po/tr.po | 253 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 129 insertions(+), 124 deletions(-) + +commit 2da9bf6318360983a148cb1c2cb6aacbebf9ef92 +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Mon May 2 03:06:31 2011 +0300 + + Uploaded Ukranian + + po/uk.po | 269 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 135 insertions(+), 134 deletions(-) + +commit 25e1f4cd1ba21574d8cb9b634d303d63980fc1cf +Author: Abduxukur Abdurixit <abdurixit@gmail.com> +Date: Sun May 1 19:53:15 2011 +0200 + + Added UG translation + + po/ug.po | 3454 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 1727 insertions(+), 1727 deletions(-) + +commit 632b792257ec85ee36c52d89a3e4304ba3200184 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Apr 30 21:27:50 2011 -0400 + + help/C, commandline.age: changed example for slideshow mode. + + Makes more sense to give a directory as a parameter. + + help/C/commandline.page | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 214e3f3c93e3a1625e4282f108b5cb96062952eb +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Apr 30 21:26:40 2011 -0400 + + help/C, shortcuts.page: minor changes + + Ctrl+W closes current window (not eog when multiple images are open). Also, shortened zoom shortcuts (no pun intended). + + help/C/shortcuts.page | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit fc85f1acb9c15ae6bfc359824efd668fbe668505 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Apr 30 21:06:59 2011 -0400 + + help/C, print.page: added sidenote + + Image can be adjusted by dragging it around in the preview. + + help/C/print.page | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +commit 48af53efc616de8d0279c06e768f4c7eb8a36e78 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Apr 30 20:12:56 2011 -0400 + + help/C, linked "rename-mulitple" and "format-change#multiple" sections. + + Changed some notes to sidebar notes, resized images to look better in smaller yelp window, and added note about "as is" option in "rename-multiple". + + help/C/format-change.page | 21 +++++++++++-------- + help/C/rename-multiple.page | 50 +++++++++++++++++++++++++++++++-------------- + 2 files changed, 48 insertions(+), 23 deletions(-) + +commit db269722e0a52c613695a4c38ba2dcccdfabc2b5 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Apr 30 12:49:33 2011 -0400 + + help/C, zoom.page: added clarification about zoom->Best Fit behaviour. + + Also, changed note style, replaced keyboard shortcuts section with a 'seealso' link to shortcuts#zoom-rotate, and + moved the "wheel" section up, for visual purposes. + + help/C/zoom.page | 38 ++++++++++++-------------------------- + 1 file changed, 12 insertions(+), 26 deletions(-) + +commit f33cb2b12df31000225497538dd1554eb4b331a4 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Apr 30 13:04:37 2011 +0200 + + mallard: fix chapter reference + + help/C/plugins.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 2267ada21f9d85abbb66143807b68b290071ead5 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Apr 30 12:50:38 2011 +0200 + + mallard: Correct a few typos + + help/C/edit.page | 2 +- + help/C/formats-save.page | 2 +- + help/C/formats-view.page | 2 +- + help/C/open.page | 2 +- + help/C/view.page | 2 +- + 5 files changed, 5 insertions(+), 5 deletions(-) + +commit f1c1a75a41fda6f61876c8ee25776df4c229a3ad +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Apr 30 11:54:07 2011 +0200 + + Adapt Makefile to recent changes to Mallard docs + + help/Makefile.am | 3 --- + 1 file changed, 3 deletions(-) + +commit 5183641e190dfc7542843e3c13030bec5543d579 +Author: Marek Černocký <marek@manet.cz> +Date: Sat Apr 30 11:24:16 2011 +0200 + + Updated Czech translation + + po/cs.po | 248 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 126 insertions(+), 122 deletions(-) + +commit 4c46822b3746ce536d2c8c35cae11545780377a9 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Fri Apr 29 14:03:36 2011 -0400 + + help/C, combined content of edit.page and delete.page + + Deleted delete.page, no pun intended. + + help/C/delete.page | 27 --------------------------- + help/C/edit.page | 16 +++++++++++++--- + 2 files changed, 13 insertions(+), 30 deletions(-) + +commit cb5e8ab8af132a9f9370ebd7da23bc14786ca769 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Apr 29 19:56:26 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 336 +++++++++++++++++++++++++++++----------------------------- + 1 file changed, 169 insertions(+), 167 deletions(-) + +commit 38911315e00bb4b6f82ba3a54739a1891f7f5b95 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Fri Apr 29 13:50:13 2011 -0400 + + help/C, plugins pages: combined date,map and exif. + + Removed plugin-map.page and plugin-date-statusbar.page. Moved + content from these pages to plugin-exif-digital.page + + help/C/plugin-date-statusbar.page | 30 ------------------------------ + help/C/plugin-exif-digital.page | 27 +++++++++++++++++++-------- + help/C/plugin-map.page | 30 ------------------------------ + 3 files changed, 19 insertions(+), 68 deletions(-) + +commit 49c635e5fe7673444880dc01f167f3fd18c774a9 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Fri Apr 29 13:24:03 2011 -0400 + + help/C, shortcuts.page, removed reference to custom shortcuts. + + Editing hotkeys via can_change_accels fails in gnome3, therefore + removed the instructions. + A few other grammatical and order fixes. + + help/C/shortcuts.page | 151 ++++++++++++-------------------------------------- + 1 file changed, 34 insertions(+), 117 deletions(-) + +commit f04323e008040424b394b4c50b6a5bac77188423 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Fri Apr 29 13:07:07 2011 -0400 + + help/C, shortcuts.page: Gnome -> GNOME + + help/C/shortcuts.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 9adf2c825c7492587579233e4b410cc0cde66ba0 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Thu Apr 28 21:25:34 2011 +0200 + + Updated Slovenian translation + + po/sl.po | 319 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 146 insertions(+), 173 deletions(-) + +commit ebfbd62ce9dc5efcc55e98e7e38458763dd7effc +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu Apr 28 21:01:33 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 2613 +++++++++++++++++++++++++++++++++++++++++++++++++-------- + 1 file changed, 2268 insertions(+), 345 deletions(-) + +commit d26cbf159243401686b6c54ecd769dc966ab3185 +Author: Ryan Lortie <desrt@desrt.ca> +Date: Thu Apr 28 00:46:43 2011 -0400 + + avoid unused 'screen' variable without lcms + + Newer GCC flags a compile warning on eog-window.c when HAVE_LCMS is + undefined due to the 'screen' variable being declared and initialised in + eog_window_init() but not used. + + Avoid that by having eog_window_get_display_profile() take the widget + itself and query the screen internally. + + src/eog-window.c | 9 ++++----- + 1 file changed, 4 insertions(+), 5 deletions(-) + +commit 6741163e22c2f0fe9f5da4d4d7f22007f4b4ffe3 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Apr 28 16:10:39 2011 +0200 + + Fix a few spelling errors in the help docs + + help/C/bug-filing.page | 2 +- + help/C/commandline.page | 2 +- + help/C/format-change.page | 4 ++-- + help/C/index.page | 8 ++++---- + help/C/introduction.page | 4 ++-- + help/C/plugin-python-console.page | 2 +- + help/C/shortcuts.page | 2 +- + 7 files changed, 12 insertions(+), 12 deletions(-) + +commit 0062419b9db41601066e6b4ed86844782da89c67 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Apr 28 15:17:22 2011 +0200 + + Improve compression of new figures for Mallard docs + + help/C/figures/eog-bestfit.png | Bin 63503 -> 58521 bytes + help/C/figures/eog-enlarge.png | Bin 93637 -> 86246 bytes + help/C/figures/eog-normalsize.png | Bin 82170 -> 75456 bytes + help/C/figures/eog-shrink.png | Bin 92504 -> 86037 bytes + help/C/figures/eog-toolbar-default.png | Bin 17912 -> 13510 bytes + help/C/figures/eog-toolbar-editor.png | Bin 28401 -> 24562 bytes + help/C/figures/eog.png | Bin 2189 -> 2092 bytes + help/C/figures/image-view-prefs.png | Bin 38709 -> 30993 bytes + help/C/figures/multiple-convert.png | Bin 31050 -> 24970 bytes + help/C/figures/multiple-rename-count.png | Bin 31295 -> 25142 bytes + help/C/figures/plugin-send-by-mail.png | Bin 60754 -> 56866 bytes + help/C/figures/plugin-tools-flickr.png | Bin 60590 -> 56552 bytes + help/C/figures/plugins-all.png | Bin 68993 -> 48189 bytes + help/C/figures/prefs-plugins-date.png | Bin 34979 -> 28551 bytes + help/C/figures/prefs-plugins-fullscreen.png | Bin 34889 -> 28569 bytes + help/C/figures/prefs-plugins.png | Bin 33565 -> 26618 bytes + help/C/figures/slideshow-prefs.png | Bin 26145 -> 20616 bytes + 17 files changed, 0 insertions(+), 0 deletions(-) + +commit 9524aa6dc5b576ce37fa972d95396847a6cf69e2 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Thu Apr 28 02:52:05 2011 -0400 + + help/C: fix typo in page title + + help/C/plugin-exif-digital.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 5b5cee82eb6f050a2bf9fc207ca30a111cbe4524 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Thu Apr 28 02:48:55 2011 -0400 + + help/C, mallard: ready for review. + + Finished plugin pages. Updated status of all pages to 'review'. + Updated plugins-all.png. + + help/C/default.page | 2 +- + help/C/figures/plugins-all.png | Bin 57998 -> 68993 bytes + help/C/index.page | 2 +- + help/C/plugin-date-statusbar.page | 2 +- + help/C/plugin-exif-digital.page | 14 ++++++++++---- + help/C/plugin-map.page | 11 ++++++++--- + help/C/plugin-postr.page | 2 +- + help/C/plugin-python-console.page | 8 ++++++-- + help/C/plugin-send-by-mail.page | 2 +- + help/C/plugin-slideshow-shuffle.page | 2 +- + help/C/plugin-zoom-width.page | 8 ++++++-- + help/C/plugins.page | 4 ++-- + 12 files changed, 38 insertions(+), 19 deletions(-) + +commit 6c37f894c9401b43a95c0b30be05da5dcf16cc55 +Author: Ryan Lortie <desrt@desrt.ca> +Date: Thu Apr 28 00:36:42 2011 -0400 + + Add Tiffany Antopolski to the list of documenters + + src/eog-window.c | 1 + + 1 file changed, 1 insertion(+) + +commit cca6217e7bc46154c5382bb4b00e1197c8d8f9cc +Author: Ryan Lortie <desrt@desrt.ca> +Date: Thu Apr 28 00:35:14 2011 -0400 + + Update help links + + Modify the help buttons in the edit toolbar and preferences dialogs to + point at the correct pages in the new documentation. + + src/eog-preferences-dialog.c | 2 +- + src/eog-window.c | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit baef1541bf395a49a0b355ebc7ab247c25a1a18d +Author: Ryan Lortie <desrt@desrt.ca> +Date: Thu Apr 28 00:33:58 2011 -0400 + + Re-enable help button in preferences dialog + + Fix a small regression introduced in commit + dbd91b21b9d549dfac8040c00e5737597c4c3536 by re-assigning the proper + response IDs to the buttons in the preferences dialog. + + data/eog-preferences-dialog.ui | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 3d295b7fddca8432706da6cba6044e6acb459f6d +Author: Ryan Lortie <desrt@desrt.ca> +Date: Thu Apr 28 00:13:22 2011 -0400 + + Death to Docbook! Long live MALLARD! + + Toss the old docbook-based documentation and update the Makefile to + build and install the new Mallard-based documentation. + + help/C/eog.xml | 800 --------------------------- + help/C/figures/eog_save_as_window.png | Bin 23436 -> 0 bytes + help/C/figures/eog_start_window.png | Bin 8424 -> 0 bytes + help/C/figures/eog_toolbar_editor_window.png | Bin 20277 -> 0 bytes + help/C/legal.xml | 85 +-- + help/Makefile.am | 62 ++- + 6 files changed, 64 insertions(+), 883 deletions(-) + +commit 3c3a83506256ade465bd817453202296b1cda618 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Sep 12 21:18:03 2010 +0200 + + Switch to lcms2 for color management + + Version 2 is listed as "official" external dependency for GNOME and is + said to be faster in some cases. + + configure.ac | 4 ++-- + src/eog-image.c | 6 +++--- + src/eog-image.h | 2 +- + src/eog-metadata-reader-jpg.c | 8 +++----- + src/eog-metadata-reader-png.c | 8 +++----- + src/eog-metadata-reader.h | 2 +- + src/eog-window.c | 12 +----------- + 7 files changed, 14 insertions(+), 28 deletions(-) + +commit 203e7474d9381c05033c4d25db0ed9e136efffb2 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Wed Apr 27 20:13:28 2011 +0200 + + Updated Spanish translation + + help/es/es.po | 3000 +++++++++++++++++++++++++++------------------------------ + 1 file changed, 1422 insertions(+), 1578 deletions(-) + +commit dda97605eb8eacda643b6ab5aaa4bbc065e06e36 +Author: Yasumichi Akahoshi <yasumichi@vinelinux.org> +Date: Wed Apr 27 23:24:43 2011 +0900 + + Updated Japanese translation + + help/ja/figures/eog_save_as_window.png | Bin 0 -> 14080 bytes + help/ja/figures/eog_start_window.png | Bin 10941 -> 7912 bytes + help/ja/figures/eog_toolbar_editor_window.png | Bin 0 -> 12420 bytes + help/ja/ja.po | 2351 ++++++++++++++++++------- + 4 files changed, 1762 insertions(+), 589 deletions(-) + +commit e78675e87876363bf55ad6abbb31e1266473b4a9 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Apr 26 23:10:00 2011 +0200 + + toolbareditor: Resync with latest code from libegg + + Contains various fixes and optimizations regarding GTK+-3 and + introspection. Will also make future code syncs easier. + + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 156 ++++++++++++++++------ + cut-n-paste/toolbar-editor/egg-editable-toolbar.h | 4 + + cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 8 +- + 3 files changed, 125 insertions(+), 43 deletions(-) + +commit 925adc2db04e11db105168d06011b6ca923da8a7 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Apr 26 22:47:15 2011 +0200 + + Raise version number to reflect development state + + We are on an unstable branch after all. + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d55706b2780bd135450423625a1cffb04d79598a +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Apr 26 22:43:48 2011 +0200 + + Prevent from opening multiple toolbar editor windows + + Multiple windows where useless as the toolbar became read-only again + when the first window was closed. + + src/eog-window.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +commit 0a16d74a768987241879913f873a68709f3587b2 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Apr 26 22:39:38 2011 +0200 + + Don't allow hiding the toolbar while editing it with the editor + + https://bugzilla.gnome.org/show_bug.cgi?id=648440 + + src/eog-window.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +commit 314fc461e6ce8be8c579684e2eb435387f5c348b +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Mon Apr 25 17:37:45 2011 -0400 + + help/C, mallard: more plugin content added. + + help/C/figures/plugin-send-by-mail.png | Bin 0 -> 60754 bytes + help/C/figures/plugin-tools-flickr.png | Bin 0 -> 60590 bytes + help/C/plugin-fullscreen-double-click.page | 3 ++- + help/C/plugin-postr.page | 11 +++++++++++ + help/C/plugin-send-by-mail.page | 12 ++++++++++-- + help/C/plugin-slideshow-shuffle.page | 8 +++++++- + help/C/plugins.page | 18 +++++++++++------- + help/C/preferences.page | 2 ++ + 8 files changed, 43 insertions(+), 11 deletions(-) + +commit 14b311ab0a1b3785b5bb63558bc055c7ef948f8a +Author: Abduxukur Abdurixit <abdurixit@gmail.com> +Date: Sun Apr 24 20:57:49 2011 +0200 + + Added UG translation + + po/ug.po | 372 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 216 insertions(+), 156 deletions(-) + +commit d4ffd93d1a2dd17174178cd9fbbfbb1c93295708 +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Sun Apr 24 20:08:56 2011 +0700 + + Updated Thai translation. + + po/th.po | 414 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 209 insertions(+), 205 deletions(-) + +commit b886dfc7824e579a04bc8ccadf7069ae2b92495f +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Apr 23 00:46:59 2011 -0400 + + help/C, mallard: added navigational links. + + help/C/preferences.page | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +commit e13565735c8fd2cb39a01ec03df5480a7b76c0f5 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Apr 23 00:24:29 2011 -0400 + + help/C, mallard: finished preferences and links. + + help/C/figures/plugins-all.png | Bin 0 -> 57998 bytes + help/C/plugins.page | 55 +++++++++++++++++++++++++++++++++++++++++ + help/C/preferences.page | 11 +++++++-- + 3 files changed, 64 insertions(+), 2 deletions(-) + +commit b4b8559b6c3faca90844bc33958f83cb1947d04c +Author: Arash Mousavi <amousavi@src.gnome.org> +Date: Fri Apr 22 13:01:38 2011 +0430 + + Updated Persian translation + + po/fa.po | 503 +++++++++++++++++++++++++++------------------------------------ + 1 file changed, 216 insertions(+), 287 deletions(-) + +commit 1281a69258cf9302e7e7fa056f38f0740eda9340 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Fri Apr 22 03:17:44 2011 -0400 + + help/C,mallard: images added and more plugin info. + + help/C/figures/prefs-plugins-date.png | Bin 0 -> 34979 bytes + help/C/figures/prefs-plugins-fullscreen.png | Bin 0 -> 34889 bytes + help/C/figures/prefs-plugins.png | Bin 0 -> 33565 bytes + help/C/plugin-date-statusbar.page | 30 +++++++++++++++++++++++++++ + help/C/plugin-fullscreen-double-click.page | 31 ++++++++++++++++++++++++++++ + help/C/preferences.page | 8 ++++--- + 6 files changed, 66 insertions(+), 3 deletions(-) + +commit 30a5a23b7d6219ae113832e16928dfab40cf54ad +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Fri Apr 22 02:25:38 2011 -0400 + + help/C, mallard: content added about using Postr. + + help/C/plugin-postr.page | 18 ++++++++++++++---- + 1 file changed, 14 insertions(+), 4 deletions(-) + +commit 107adb3c8accc3e1c0eb06e77717f012127ff464 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Apr 20 23:18:33 2011 +0200 + + Allow editing the toolbar only when it is visible + + Disables the toolbar editor in the menu when the toolbar is toggled off. + Fixes bug #648055. + + src/eog-window.c | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +commit aaa4330affa9e738b69af2d90a272db263c08f03 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Wed Apr 20 00:32:25 2011 -0400 + + help/C, mallard: preferences clarifications. + + Clarified view preferences and added seealso links to slideshow. + + help/C/plugin-slideshow-shuffle.page | 1 + + help/C/preferences.page | 52 +++++++++++++++++++----------------- + 2 files changed, 29 insertions(+), 24 deletions(-) + +commit dee93df8db7010a708cb209673ff8bff62f240ed +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Tue Apr 19 23:53:12 2011 -0400 + + help/C, mallard: updated status draft-> review. + + help/C/bug-filing.page | 3 ++- + help/C/copy-paste.page | 2 +- + help/C/default.page | 2 +- + help/C/desktop-background.page | 2 +- + help/C/format-change.page | 2 +- + help/C/index.page | 2 +- + help/C/preferences.page | 2 +- + help/C/print.page | 2 +- + help/C/toolbar.page | 2 +- + help/C/view.page | 2 +- + 10 files changed, 11 insertions(+), 10 deletions(-) + +commit e7a61dfc9a3215d03239b13eccaf6a4c4a906a80 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Tue Apr 19 23:46:07 2011 -0400 + + help/C, mallard: print content added & title fixes + + Title fixes consist of grammar (tense) adjustments. + + help/C/{image-edit.page => edit.page} | 4 ++-- + help/C/flip-rotate.page | 1 - + help/C/index.page | 8 +++---- + help/C/open.page | 7 ++++-- + help/C/print-photo.page | 25 ---------------------- + help/C/print-settings.page | 25 ---------------------- + help/C/print.page | 40 +++++++++++++++++++++++++++++++++++ + help/C/view.page | 2 +- + help/C/zoom.page | 2 +- + 9 files changed, 53 insertions(+), 61 deletions(-) + +commit 2ab3b1aa2a801e9b07505fcdce278316da7e085b +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Mon Apr 18 23:18:49 2011 -0400 + + help/C, mallard, fixed tag error + + help/C/introduction.page | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit e3f78a6661281eaea624e94845f5ddf4e8e1db34 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Mon Apr 18 23:16:00 2011 -0400 + + help/C, mallard: added stubs about plugins + + help/C/copy-paste.page | 9 +++- + help/C/figures/image-view-prefs.png | Bin 0 -> 38709 bytes + help/C/formats-more.page | 21 ---------- + help/C/formats-save.page | 4 +- + help/C/formats-view.page | 3 -- + help/C/introduction.page | 4 +- + ...{exif-digital.page => plugin-exif-digital.page} | 6 +-- + help/C/{exif-digital.page => plugin-map.page} | 6 +-- + help/C/{exif-digital.page => plugin-postr.page} | 6 +-- + ...xif-digital.page => plugin-python-console.page} | 8 ++-- + ...{exif-digital.page => plugin-send-by-mail.page} | 6 +-- + ...-digital.page => plugin-slideshow-shuffle.page} | 6 +-- + .../{exif-digital.page => plugin-zoom-width.page} | 6 +-- + help/C/preferences.page | 46 +++++++++++++++++++-- + help/C/slideshow.page | 18 ++------ + 15 files changed, 77 insertions(+), 72 deletions(-) + +commit 00b452e99c3f9200faf3c45d260584ee926969b1 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Mon Apr 18 17:17:09 2011 -0400 + + help/C/figures/ adding missing images + + help/C/figures/multiple-convert.png | Bin 0 -> 31050 bytes + help/C/figures/multiple-rename-count.png | Bin 0 -> 31295 bytes + 2 files changed, 0 insertions(+), 0 deletions(-) + +commit d16f0faf0d44ec9355672bce081a1a3e966e97ef +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Mon Apr 18 17:04:06 2011 -0400 + + help/C, mallard, new file + + help/C/delete.page | 27 +++++++++++++++++++++++++++ + help/C/image-edit.page | 2 +- + 2 files changed, 28 insertions(+), 1 deletion(-) + +commit 309db85c99eeca578d6b0ee54559f19e7f6acd70 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Mon Apr 18 16:52:28 2011 -0400 + + help/C, mallard: editing images section done. + + help/C/format-change.page | 2 +- + help/C/formats-view.page | 5 +++-- + help/C/image-edit.page | 15 ++++++++++---- + help/C/rename-multiple.page | 49 +++++++++++++++++++++++++++++++++++++++++++++ + help/C/save-multiple.page | 24 ---------------------- + 5 files changed, 64 insertions(+), 31 deletions(-) + +commit 3fa825e8bbdcc99e51565ca809a50f16b52a6546 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Mon Apr 18 14:50:40 2011 -0400 + + help/C, mallard": file conversion using eog. + + help/C/default-photo-editor.page | 33 ----------- + help/C/format-change.page | 67 ++++++++++++++++++++++ + help/C/{saving-changes.page => save-multiple.page} | 11 ++-- + 3 files changed, 72 insertions(+), 39 deletions(-) + +commit 17270f706318a2a7376ea9da542cb8325efc5f9b +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Mon Apr 18 03:36:47 2011 -0400 + + help/C,mallard: keyboardshortcuts/commanline done. + + help/C/commandline.page | 48 +++++++-- + help/C/desktop-background.page | 14 ++- + help/C/formats-save.page | 3 +- + help/C/keyboard-shortcuts.page | 29 ----- + help/C/shortcuts.page | 240 +++++++++++++++++++++++++++++++++++++++++ + 5 files changed, 292 insertions(+), 42 deletions(-) + +commit fc085ec4b9ff9e3a86466aeaffea1fad0104b32b +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sun Apr 17 19:00:50 2011 -0400 + + [mallard-docs] toolbar documented. + + help/C/figures/eog-toolbar-default.png | Bin 0 -> 17912 bytes + help/C/figures/eog-toolbar-editor.png | Bin 0 -> 28401 bytes + help/C/flip-rotate.page | 10 ++++---- + help/C/toolbar.page | 42 +++++++++++++++++++++++++++++---- + 4 files changed, 44 insertions(+), 8 deletions(-) + +commit d7a70380aa8d686ddf00944aa21dd14792bfdb95 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sun Apr 17 13:00:01 2011 -0400 + + [mallard]changes to intro page and link to help. + + help/C/format-change.page | 25 ----------- + help/C/formats-more.page | 21 +++++++++ + help/C/{saving-changes.page => formats-save.page} | 0 + help/C/index.page | 2 +- + help/C/introduction.page | 11 ++++- + help/C/saving-changes.page | 53 ++++++++++------------- + 6 files changed, 55 insertions(+), 57 deletions(-) + +commit ce445b0bd004759f2ca9763f29d31b87f969d09f +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sun Apr 17 06:11:07 2011 -0400 + + mallard-docs:how to set eog default image viewer. + + help/C/default.page | 44 ++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 44 insertions(+) + +commit f736fdee17e545c6d19bc3cdb7814d71609d6070 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sun Apr 17 04:19:47 2011 -0400 + + [mallard-docs] viewing section complete. + + help/C/exif-digital.page | 2 +- + help/C/index.page | 4 +++- + help/C/introduction.page | 2 +- + help/C/open.page | 13 +++++++------ + help/C/slideshow.page | 31 +++++++++++++++++++++++++++---- + help/C/view.page | 33 ++++++++++++++++++++++++--------- + help/C/zoom.page | 5 +++-- + 7 files changed, 66 insertions(+), 24 deletions(-) + +commit c0ef38a71f72db1dda7625068db7b82e7dca79d9 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Sat Apr 16 22:16:48 2011 -0400 + + [mallard-docs] work on 'viewing images' section. + + help/C/desktop-background.page | 26 ++++++++++++++ + help/C/figures/slideshow-prefs.png | Bin 0 -> 26145 bytes + help/C/{rotate.page => flip-rotate.page} | 24 ++++++++++--- + help/C/flip.page | 32 ----------------- + help/C/formats-view.page | 2 +- + help/C/image-open.page | 23 ------------- + help/C/open.page | 57 +++++++++++++++++++++++++++++++ + help/C/slideshow.page | 25 ++++++++++++++ + help/C/view.page | 46 +++++++++++++++++++++++++ + help/C/zoom.page | 2 +- + 10 files changed, 176 insertions(+), 61 deletions(-) + +commit 64e546230fc190eb24f59cc3359947a106288516 +Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> +Date: Sat Apr 16 19:39:27 2011 +0200 + + Updated Slovenian translation + + help/sl/sl.po | 682 +++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 360 insertions(+), 322 deletions(-) + +commit 3f5661cfe8141a3974e5998db6538fcbe2f2ea11 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Thu Apr 14 17:32:40 2011 -0400 + + [help/C]: added content to rotate and flip pages. + + Also, seperated supported formats for viewing and for saving. Fixed + copy/paste error in introduction page. + + help/C/flip.page | 12 +++++++--- + help/C/{formats.page => formats-view.page} | 14 ++---------- + help/C/introduction.page | 5 +++-- + help/C/rotate.page | 24 +++++++++++++++++--- + help/C/saving-changes.page | 36 +++++++++++++++++------------- + help/C/zoom.page | 2 +- + 6 files changed, 57 insertions(+), 36 deletions(-) + +commit e9c15525c8324a3145b53ed9ae9ea35e5db387e8 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Wed Apr 13 14:09:12 2011 -0400 + + help/C/: zoom.page completed, added screenshots. + + Added content to zoom.page, changed status to review. Changed icon, and + added screenshots to demonstrate toolbar use for zooming. Also, add + some content to toolbar.page + + help/C/figures/eog-bestfit.png | Bin 0 -> 63503 bytes + help/C/figures/eog-enlarge.png | Bin 0 -> 93637 bytes + help/C/figures/eog-normalsize.png | Bin 0 -> 82170 bytes + help/C/figures/eog-shrink.png | Bin 0 -> 92504 bytes + help/C/figures/eog.png | Bin 2330 -> 2189 bytes + help/C/toolbar.page | 1 + + help/C/zoom.page | 47 +++++++++++++++++++++++++++++++------- + 7 files changed, 40 insertions(+), 8 deletions(-) + +commit 9ec30ae9a87cc0b39ec42d26cc948e690e0730d8 +Author: Tiffany Antopolski <tiffany@antopolski.com> +Date: Mon Apr 11 02:36:38 2011 -0400 + + help: mallard topics stubbed out. + + help/C/bug-filing.page | 47 +++++++++++++++++++++++++++++++ + help/C/commandline.page | 26 ++++++++++++++++++ + help/C/copy-paste.page | 27 ++++++++++++++++++ + help/C/default-photo-editor.page | 33 ++++++++++++++++++++++ + help/C/exif-digital.page | 25 +++++++++++++++++ + help/C/figures/eog.png | Bin 0 -> 2330 bytes + help/C/flip.page | 26 ++++++++++++++++++ + help/C/format-change.page | 25 +++++++++++++++++ + help/C/formats.page | 58 +++++++++++++++++++++++++++++++++++++++ + help/C/image-edit.page | 24 ++++++++++++++++ + help/C/image-open.page | 23 ++++++++++++++++ + help/C/index.page | 48 ++++++++++++++++++++++++++++++++ + help/C/introduction.page | 24 ++++++++++++++++ + help/C/keyboard-shortcuts.page | 29 ++++++++++++++++++++ + help/C/preferences.page | 41 +++++++++++++++++++++++++++ + help/C/print-photo.page | 25 +++++++++++++++++ + help/C/print-settings.page | 25 +++++++++++++++++ + help/C/rotate.page | 26 ++++++++++++++++++ + help/C/saving-changes.page | 24 ++++++++++++++++ + help/C/toolbar.page | 35 +++++++++++++++++++++++ + help/C/zoom.page | 44 +++++++++++++++++++++++++++++ + 21 files changed, 635 insertions(+) + +commit 3869f5a265f5af337c8bedaed3df2cfa1674e62c +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Sun Apr 10 22:51:11 2011 +0200 + + Updated Dutch translation by Wouter Bolsterlee + + po/nl.po | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 0dba6761b9c613e299a44135fa9871d764473927 +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Sun Apr 10 22:26:09 2011 +0200 + + Updated Dutch translation by Wouter Bolsterlee + + po/nl.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit 788f52f7afcfa06cb7a5fd791a9923f3c3b0a453 +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Sun Apr 10 22:21:50 2011 +0200 + + Updated Dutch translation by Wouter Bolsterlee + + po/nl.po | 211 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 107 insertions(+), 104 deletions(-) + +commit 08df0c62d0f67800bf0804eb56924a330c70c7f7 +Author: Gil Forcada <gforcada@gnome.org> +Date: Sun Apr 10 19:35:03 2011 +0200 + + [l10n]Updated Catalan translation + + po/ca.po | 13 ++++++++----- + 1 file changed, 8 insertions(+), 5 deletions(-) + +commit 5c328fa9833944dd690d12f8202248ddd9264d58 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sun Apr 10 11:52:14 2011 +0200 + + Updated Spanish translation + + po/es.po | 238 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 122 insertions(+), 116 deletions(-) + +commit 1ffac8145fc432f2afad5c5641b0b987247f928f +Author: Alexander Shopov <ash@kambanaria.org> +Date: Sun Apr 10 08:51:48 2011 +0300 + + Updated Bulgarian translation + + po/bg.po | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +commit 4be6ee9e811f473c75bb5f9d6cc55f7f9fab864c +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sat Apr 9 19:03:17 2011 +0200 + + Updated Galician translations + + po/gl.po | 229 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 116 insertions(+), 113 deletions(-) + +commit f60a6851a1fb5c7e39fef3a542e9a524555fd62f +Author: Daniel Nylander <po@danielnylander.se> +Date: Sat Apr 9 16:25:58 2011 +0200 + + Updated Swedish translation + + po/sv.po | 254 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 128 insertions(+), 126 deletions(-) + +commit b4fefa4d98a8db91738da593e2101160fbd63465 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Apr 9 15:14:09 2011 +0200 + + Fix conflicting mnemonics in View menu + + https://bugzilla.gnome.org/show_bug.cgi?id=646360 + + src/eog-window.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit dbd91b21b9d549dfac8040c00e5737597c4c3536 +Author: Diego Escalante Urrelo <descalante@igalia.com> +Date: Sun Mar 13 18:50:58 2011 -0500 + + preferences-dialog: fix some rough edges + + - Make the GtkBox explicitely vertical + - Have the color pick buttons look similar (don't expand) + - Use GtkAlignment instead of hacky GtkLabels for padding + + Bug #646623 + + data/eog-preferences-dialog.ui | 390 ++++++++++++++++++----------------------- + 1 file changed, 175 insertions(+), 215 deletions(-) + +commit 9e1404983a866ef35ee3d424d4bca180a902f250 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Apr 9 15:15:14 2011 +0200 + + Drop old Glade UI files + + They are not used anymore and are out of sync with the GtkBuilder files + for quite some time now. + + data/eog-multiple-save-as-dialog.glade | 617 ----------------------- + data/eog-preferences-dialog.glade | 885 --------------------------------- + po/POTFILES.skip | 3 - + 3 files changed, 1505 deletions(-) + +commit 117193e1ea1fb3366a16c0ef0c4af9e8c7fc0a11 +Author: Timo Jyrinki <timo@debian.org> +Date: Wed Apr 6 10:39:40 2011 +0300 + + Updated Finnish help translation. + + help/fi/fi.po | 615 ++++++++++++++++++++++++++++++++++++++++------------------ + 1 file changed, 431 insertions(+), 184 deletions(-) + +commit 78e35afb4e1b8373e41d63f9c0e0282a922f8cc7 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Apr 5 00:30:28 2011 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a8d2a89e6e27f4bec7ef3ae93746d23e86dec906 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Apr 5 00:23:20 2011 +0200 + + Prepare for release 3.0.0 + + NEWS | 31 +++++++++++++++++++++++++++++++ + configure.ac | 6 +++--- + 2 files changed, 34 insertions(+), 3 deletions(-) + +commit 3cb602bc0c5a4a08c928cd1829cdbd1e4ce02bfe +Author: Baris Cicek <baris@teamforce.name.tr> +Date: Mon Apr 4 07:51:15 2011 +0300 + + Updated Turkish translation + + po/tr.po | 1117 +++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 661 insertions(+), 456 deletions(-) + +commit 1c0758cb9f068f8dbeed274d27e042c5b8d83764 +Author: Wolfgang Stöggl <c72578@yahoo.de> +Date: Sun Apr 3 20:12:52 2011 +0200 + + [l10n] Updated German translation, umlauts fixed + + po/de.po | 83 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 42 insertions(+), 41 deletions(-) + +commit e81ec6cafff1d10295562254a7ad2a2230b162a7 +Author: Jordi Serratosa <serratosa@gmail.com> +Date: Sat Apr 2 20:46:40 2011 +0200 + + [l10n]Fixes on Catalan translation + + po/ca.po | 228 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 114 insertions(+), 114 deletions(-) + +commit 17742d028ebb3d899bec9e2835282d15f8603d40 +Author: Marek Černocký <marek@manet.cz> +Date: Fri Apr 1 19:39:17 2011 +0200 + + Updated Czech translation + + help/cs/cs.po | 1804 +++++++++++++++++++++++++++++++++++++++++---------------- + 1 file changed, 1297 insertions(+), 507 deletions(-) + +commit f1cc6daa8784bea5b24b0fff154a96b85ea8344e +Author: Rajesh Ranjan <rranjan@redhat.com> +Date: Thu Mar 31 17:12:59 2011 +0530 + + hindi updated + + po/hi.po | 1170 ++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 689 insertions(+), 481 deletions(-) + +commit f5d03d9211b07f4b732f0899b97e3cb5a907aef7 +Author: Amitakhya Phukan <amitakhya@svn.gnome.org> +Date: Thu Mar 31 17:00:39 2011 +0530 + + Updated Assamese translations + + po/as.po | 1211 ++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 746 insertions(+), 465 deletions(-) + +commit 5931d6d452267d3770465d495e8499cc7823fe35 +Author: Милош Поповић <gpopac@gmail.com> +Date: Thu Mar 31 01:40:18 2011 +0200 + + Updated Serbian translation + + po/sr.po | 708 +++++++++++++++++++++++++++++---------------------------- + po/sr@latin.po | 708 +++++++++++++++++++++++++++++---------------------------- + 2 files changed, 720 insertions(+), 696 deletions(-) + +commit 2413c811f3ce099e7b918e11620ac67ea3cf5d8f +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Wed Mar 30 19:51:25 2011 +0200 + + Updated Basque language + + po/eu.po | 112 +++++++++++++-------------------------------------------------- + 1 file changed, 23 insertions(+), 89 deletions(-) + +commit 93e0c6eb19bd9aa0291c8415cb8a4923f7dd7953 +Author: Kenneth Nielsen <k.nielsen81@gmail.com> +Date: Mon Mar 28 23:15:27 2011 +0200 + + Updated Danish translation + + po/da.po | 526 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 272 insertions(+), 254 deletions(-) + +commit 9954caeb86a3ab31720bdf278492fab9b881eb5a +Author: Daniel Korostil <ted.korostiled@gmail.com> +Date: Mon Mar 28 20:51:38 2011 +0300 + + Uploaded Ukranian + + po/uk.po | 977 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 542 insertions(+), 435 deletions(-) + +commit 97928fd4fcafbd86bfb523d65f437784bcd028b0 +Author: Sweta Kothari <swkothar@redhat.com> +Date: Mon Mar 28 12:10:39 2011 +0530 + + Updated Gujarati Translations + + po/gu.po | 162 ++++++++++++++++----------------------------------------------- + 1 file changed, 41 insertions(+), 121 deletions(-) + +commit 4529e44997d5b26ce7c281e9655ceeeb14a6546e +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Mar 27 21:28:46 2011 +0200 + + Add description and updated maintainer entries to DOAP file + + eog.doap | 15 ++++++++++++--- + 1 file changed, 12 insertions(+), 3 deletions(-) + +commit 755243a1f4a56e3e8ed36a4d981b5dbcf93caadc +Author: Abduxukur Abdurixit <abdurixit@gmail.com> +Date: Sun Mar 27 19:19:29 2011 +0200 + + Added UG translation + + po/ug.po | 3326 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 1667 insertions(+), 1659 deletions(-) + +commit 13b7487bd4a26180b555e750c15e83e9927ca6ce +Author: Laco Gubík <lacogubik@gmail.com> +Date: Sun Mar 27 18:40:32 2011 +0200 + + Updated Slovak translation + + po/sk.po | 444 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 222 insertions(+), 222 deletions(-) + +commit c09a7eb557611e503e1ddee0d4febbd2de1c562e +Author: Dr.T.Vasudevan <agnihot3@gmail.com> +Date: Sun Mar 27 16:04:25 2011 +0530 + + Updated Tamil translation + + po/ta.po | 517 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 279 insertions(+), 238 deletions(-) + +commit 28b3535ca4f835182293d6d56988cb09cc8be3e1 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sun Mar 27 01:18:44 2011 +0700 + + Updated Vietnamese translation + + po/vi.po | 15 ++++++--------- + 1 file changed, 6 insertions(+), 9 deletions(-) + +commit a251e11166e25bd71d70599954e331be8b4856e7 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sun Mar 27 01:17:13 2011 +0700 + + po/vi.po: import from Damned Lies + + po/vi.po | 486 ++++++++++++++++++++++++++------------------------------------- + 1 file changed, 200 insertions(+), 286 deletions(-) + +commit cb25607a687e55bbaa81d57471bad54c4e23bca9 +Author: Friedel Wolff <friedel@translate.org.za> +Date: Fri Mar 25 00:26:26 2011 +0200 + + Update translation for Afrikaans (af) + + po/af.po | 1417 +++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 837 insertions(+), 580 deletions(-) + +commit c9ab6efa8d4d533206965d20f15d880f52acb90c +Author: Shankar Prasad <svenkate@redhat.com> +Date: Thu Mar 24 16:19:07 2011 +0530 + + Updated kn translations + + po/kn.po | 126 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 63 insertions(+), 63 deletions(-) + +commit 590e56b9bb0cce0be41cb2367176f10d0fa03705 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Thu Mar 24 18:36:27 2011 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 307 +++++++++++++++++++++++++----------------------------------- + po/zh_TW.po | 307 +++++++++++++++++++++++++----------------------------------- + 2 files changed, 252 insertions(+), 362 deletions(-) + +commit c487504255e531c201907707878e7357ae7164fa +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Wed Mar 23 11:40:04 2011 +0100 + + Updated Italian translation + + po/it.po | 625 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 297 insertions(+), 328 deletions(-) + +commit a84e438db5e710128eeaab70badcb963bc9a7ecd +Author: Krasimir Chonov <mk2616@abv.bg> +Date: Wed Mar 23 11:09:05 2011 +0200 + + Updated Bulgarian translation + + po/bg.po | 230 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 115 insertions(+), 115 deletions(-) + +commit ddfd8b5d34d99fbe623638b58d5e3e9e454b2c34 +Author: Runa Bhattacharjee <runab@redhat.com> +Date: Tue Mar 22 16:14:46 2011 +0530 + + Updated Bengali India Translation + + po/bn_IN.po | 1010 +++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 560 insertions(+), 450 deletions(-) + +commit 0f5e9735f36cd3811d59b42652f512932523cbc1 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 21 21:44:22 2011 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c69d8e24a7e4c29cb0ec8a6abd52d8b9d11665a0 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 21 21:39:06 2011 +0100 + + Prepare for release 2.91.92 + + NEWS | 32 ++++++++++++++++++++++++++++++++ + 1 file changed, 32 insertions(+) + +commit 45eae849fbc8793a0f8f862894bcb82995f49b54 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 21 21:37:35 2011 +0100 + + Update required gsettings-desktop-schemas version + + This is to make sure the "picture-uri" key required by + commit 60a7e7b6 is present in the system. + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 60a7e7b6628b169c3cfde548322b5fe996cdec32 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Mar 10 20:33:23 2011 +0200 + + Update to the new "picture-uri" GSettings key + + https://bugzilla.gnome.org/show_bug.cgi?id=644417 + + src/eog-config-keys.h | 2 +- + src/eog-window.c | 5 ++++- + 2 files changed, 5 insertions(+), 2 deletions(-) + +commit ee00efdc226b03c39f2afd52d5f259fb4cb4a7c7 +Author: Rudolfs Mazurs <rudolfs.mazurs@gmail.com> +Date: Sun Mar 20 16:58:19 2011 +0200 + + Updated Latvian translation. + + po/lv.po | 436 ++++++++++++++++++++++++--------------------------------------- + 1 file changed, 167 insertions(+), 269 deletions(-) + +commit e98e49425230850c8f76c5b64ade0c7de979f4cf +Author: Dirgita <dirgitadevina@yahoo.co.id> +Date: Sun Mar 20 11:53:14 2011 +0700 + + Updated Indonesian translation + + po/id.po | 622 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 318 insertions(+), 304 deletions(-) + +commit bdc64098cdc1a05f594ea24510b5b165ecdf1c7d +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Sat Mar 19 01:04:55 2011 +0100 + + Updated Dutch translation by Wouter Bolsterlee + + po/nl.po | 574 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 274 insertions(+), 300 deletions(-) + +commit f4cae9f0812685f3f3d483992fc38089171c015f +Author: Aron Xu <aronxu@gnome.org> +Date: Fri Mar 18 19:21:19 2011 +0800 + + Update Simplified Chinese translation. + + po/zh_CN.po | 21 ++++++++------------- + 1 file changed, 8 insertions(+), 13 deletions(-) + +commit 1234d1210a54922e0b4b9bc7150dc71bc74387ef +Author: Gintautas Miliauskas <gintautas@miliauskas.lt> +Date: Thu Mar 17 16:03:26 2011 +0100 + + Updated Lithuanian translation. + + po/lt.po | 719 +++++++++++++++++++++++++++------------------------------------ + 1 file changed, 310 insertions(+), 409 deletions(-) + +commit 873c8135f450c4f0b32634de9d95b83429e4c0c4 +Author: Claude Paroz <claude@2xlibre.net> +Date: Thu Mar 17 15:44:52 2011 +0100 + + Updated French help translation + + help/fr/fr.po | 691 +++++++++++++++++++++++++++------------------------------- + 1 file changed, 327 insertions(+), 364 deletions(-) + +commit 4c32882cc5d71ca7cc41e6843b4f36533d3ada68 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Mar 16 19:23:40 2011 +0100 + + Enable TotemScreensaver unconditionally + + It uses GDBus instead of libdbus now. It can be enabled even if + libdbus is not available as GDBus/GIO is always present. + + src/eog-application.c | 4 ---- + src/eog-application.h | 7 +------ + src/eog-window.c | 4 ---- + 3 files changed, 1 insertion(+), 14 deletions(-) + +commit 609e8f7079b804dfddc3196034e48b30e57cb0b7 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Mar 16 19:16:53 2011 +0100 + + Merge latest TotemScreensaver changes into eog's local copy + + This includes several bugfixes and makes eog use the Inhibitor-API + in gnome-session instead of gnome-screensaver. + + https://bugzilla.gnome.org/show_bug.cgi?id=644631 + + cut-n-paste/totem-screensaver/totem-scrsaver.c | 154 +++++++++++-------------- + 1 file changed, 67 insertions(+), 87 deletions(-) + +commit 07589d71c3a1e223f947385d38c4c9d38822e17b +Author: Fran Diéguez <fran@openhost.es> +Date: Tue Mar 15 20:22:11 2011 +0100 + + Updated Galician translations + + po/gl.po | 23 +++++++++++++---------- + 1 file changed, 13 insertions(+), 10 deletions(-) + +commit 2aeb02c2ababd2fe97aec6197866e2afbe99ff1a +Author: Marek Černocký <marek@manet.cz> +Date: Tue Mar 15 18:46:45 2011 +0100 + + Updated Czech translation + + po/cs.po | 328 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 156 insertions(+), 172 deletions(-) + +commit ea281a6e8f4bd83981d631ce1ad98831802de98a +Author: Shankar Prasad <svenkate@redhat.com> +Date: Tue Mar 15 16:25:49 2011 +0530 + + Updated kn translations + + po/kn.po | 887 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 521 insertions(+), 366 deletions(-) + +commit d52a7d988b3b249ad928cb9ce871e52214f752a3 +Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> +Date: Tue Mar 15 00:08:11 2011 +0900 + + Updated Japanese translation. + + po/ja.po | 15 +++++++++------ + 1 file changed, 9 insertions(+), 6 deletions(-) + +commit c76388b99f76a5760a7d85d863b0ad3fa6c97b8a +Author: Flamarion Jorge <jorge.flamarion@gmail.com> +Date: Mon Mar 14 11:34:25 2011 -0300 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 70 +++++++++++++++++++++++++++---------------------------------- + 1 file changed, 31 insertions(+), 39 deletions(-) + +commit 67be80e20c130ddc4c1ccca193ebfa17a1f4b03f +Author: Michael Kotsarinis <mk73628@gmail.com> +Date: Sun Mar 13 19:54:26 2011 +0200 + + l10n: Updated Greek translation + + po/el.po | 52 +++++++++++++++++++++++++++++----------------------- + 1 file changed, 29 insertions(+), 23 deletions(-) + +commit 14832e53cab203f963e74c2ffd4d350e5b3220fa +Author: Bruce Cowan <bruce@bcowan.me.uk> +Date: Sat Mar 12 18:54:19 2011 +0000 + + Updated British English translation + + po/en_GB.po | 565 ++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 303 insertions(+), 262 deletions(-) + +commit 62170f849cf362bc499d27248e0056826684e97b +Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> +Date: Sat Mar 12 03:15:10 2011 +0100 + + Updated Romanian translation + + po/ro.po | 15 ++++++--------- + 1 file changed, 6 insertions(+), 9 deletions(-) + +commit 0830f0b4df8e5e7fefa6c66b472aa6e7deb8bf4b +Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> +Date: Sat Mar 12 03:12:21 2011 +0100 + + Updated Romanian translation + + po/ro.po | 17 ++++++++--------- + 1 file changed, 8 insertions(+), 9 deletions(-) + +commit b743965e681edb8a426fc2336989a183a833fb81 +Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> +Date: Sat Mar 12 02:55:25 2011 +0100 + + Updated Romanian translation + + po/ro.po | 414 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 204 insertions(+), 210 deletions(-) + +commit a0295018bec5a74280d063c5ebb6e35e80165c56 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Mar 11 14:48:27 2011 +0100 + + Raise required libpeas version to 0.7.4 + + That version has and depens on everything eog needs + to get correctly working Python plugins. + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 581c17d94f3424aa5919a30bd857c35023d6a351 +Author: André Gondim <andregondim@ubuntu.com> +Date: Thu Mar 10 15:40:26 2011 -0300 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 863 +++++++++++++++++++++++++++++------------------------------- + 1 file changed, 413 insertions(+), 450 deletions(-) + +commit ba89069173b90cc86b39780aacf69042b9838b11 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Wed Mar 9 19:15:27 2011 +0100 + + Updated Polish translation + + po/pl.po | 763 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 399 insertions(+), 364 deletions(-) + +commit 6a74092705a0fbd8135e02d361451aa251623aec +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Wed Mar 9 13:56:34 2011 +0100 + + Updated Hungarian translation + + po/hu.po | 601 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 286 insertions(+), 315 deletions(-) + +commit 95f8ae88ce1104a53ba19ac6ae258babf57f88d3 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Mar 8 16:04:29 2011 +0100 + + Fix NEWS entries for last release + + Somehow pushed an unfinished version of that file. + + NEWS | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 0d2a6c0c08ceeca6c26867d95a6f4cffb2a10d28 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Mar 8 15:52:11 2011 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b89549f0c0c8613955fc3c1b0f5cc8f75443430c +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Mar 8 15:49:07 2011 +0100 + + Prepare for release 2.91.91 + + NEWS | 32 ++++++++++++++++++++++++++++++++ + 1 file changed, 32 insertions(+) + +commit d1d6b9452acc874d1f46ca57f5695bf128acbf91 +Author: Steve Frécinaux <code@istique.net> +Date: Mon Mar 7 19:05:44 2011 +0100 + + Enable python support for plugins + + https://bugzilla.gnome.org/show_bug.cgi?id=639597 + + src/eog-plugin-engine.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +commit 8b45322ac9085f7f4d9bf942f66e8ec31581f5fd +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Tue Mar 8 14:52:43 2011 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 22 ++++++++++++++-------- + 1 file changed, 14 insertions(+), 8 deletions(-) + +commit d1da84198d50703006e747b56ef8ba5107f7f3bd +Author: Cosimo Cecchi <cosimoc@gnome.org> +Date: Mon Mar 7 09:32:38 2011 -0500 + + window: add the primary-toolbar style to the toolbar + + https://bugzilla.gnome.org/show_bug.cgi?id=644117 + + configure.ac | 2 +- + src/eog-window.c | 2 ++ + 2 files changed, 3 insertions(+), 1 deletion(-) + +commit 53ac8a0d48152530fb96cd39e743c1d64598a647 +Author: Yuri Myasoedov <omerta13@yandex.ru> +Date: Tue Mar 8 10:18:30 2011 +0300 + + Updated Russian translation + + po/ru.po | 357 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 169 insertions(+), 188 deletions(-) + +commit c9d9e426d22319be97d98c1668e75f9b6fdbee1e +Author: Duarte Loreto <happyguy_pt@hotmail.com> +Date: Sun Mar 6 18:40:13 2011 +0000 + + Updated Portuguese translation + + po/pt.po | 550 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 290 insertions(+), 260 deletions(-) + +commit e673bb798cd9624c012b4ff5da5ae8b2bfd31223 +Author: Rudolfs Mazurs <rudolfs.mazurs@gmail.com> +Date: Sat Mar 5 15:06:31 2011 +0200 + + Updated Latvian translation. + + po/lv.po | 929 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 513 insertions(+), 416 deletions(-) + +commit 76eeed4093c4eb8251991fc3f30dd0d6a579e148 +Author: A S Alam <aalam@users.sf.net> +Date: Sat Mar 5 07:00:51 2011 +0530 + + update Punjabi Translation by A S Alam + + po/pa.po | 547 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 276 insertions(+), 271 deletions(-) + +commit e91234247f6f88a048cc493090d8a18506750e08 +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Wed Mar 2 13:38:49 2011 +0100 + + Updated French translation + + po/fr.po | 668 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 351 insertions(+), 317 deletions(-) + +commit b50d8780b0e5888fc7f326a31b4f78047bd42976 +Author: Daniel Nylander <po@danielnylander.se> +Date: Tue Mar 1 20:53:39 2011 +0100 + + Updated Swedish translation + + po/sv.po | 16 ++++++---------- + 1 file changed, 6 insertions(+), 10 deletions(-) + +commit 81bcaaeff17b64e25b487aedbbdf8dcbe8153e4d +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Tue Mar 1 18:21:22 2011 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +commit c4b2d2e600919b4c7ca95cd3451c7473c2da70f4 +Author: Wei Li <lw124124@gmail.com> +Date: Tue Mar 1 12:01:57 2011 +0000 + + [l10n]Update Chinese (China) translations. + + po/zh_CN.po | 404 +++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 209 insertions(+), 195 deletions(-) + +commit d46b485c6a0bfe27b76c6414ee423242ba71ce91 +Author: Gil Forcada <gforcada@gnome.org> +Date: Tue Mar 1 00:42:13 2011 +0100 + + [l10n] Updated Catalan translation + + po/ca.po | 669 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 353 insertions(+), 316 deletions(-) + +commit 9e0cb3df0c1d9ef546b87534e25cc112f3dfc56f +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Sun Feb 27 22:52:56 2011 +0200 + + Updated Hebrew translation. + + po/he.po | 11 +++++++---- + 1 file changed, 7 insertions(+), 4 deletions(-) + +commit ef7ec539bff3bcf95f0d90d5426e8f2c1b4793d7 +Author: Ivar Smolin <okul@linux.ee> +Date: Sun Feb 27 19:21:07 2011 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 11 +++++++---- + 1 file changed, 7 insertions(+), 4 deletions(-) + +commit b4e6e4e66714a6ddf356bad160a0a12b42f725ab +Author: Mario Blättermann <mariobl@gnome.org> +Date: Sat Feb 26 20:58:52 2011 +0100 + + [l10n] Updated German translation + + po/de.po | 79 ++++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 42 insertions(+), 37 deletions(-) + +commit c11d73291ce0b980981dd2d6b3429b1219435640 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Sat Feb 26 19:17:37 2011 +0200 + + Small configure.ac format nitpick + + configure.ac | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +commit 0bb3712ced6e914121c30e1d54397291be153a4d +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sat Feb 26 22:49:09 2011 +0900 + + Updated Korean translation + + po/ko.po | 658 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 349 insertions(+), 309 deletions(-) + +commit 7c06ad0ade5bd16af94bd2deaa096d6079d3676e +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sun Sep 26 03:52:55 2010 +0900 + + Updated Korean translation + + po/ko.po | 511 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 278 insertions(+), 233 deletions(-) + +commit 477b3c0d290f5b4dc8fba0f4b348590553e18951 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Fri Feb 25 20:31:39 2011 +0100 + + Updated Spanish translation + + po/es.po | 16 +++++++++------- + 1 file changed, 9 insertions(+), 7 deletions(-) + +commit b7c34b8c7c6845a4545eb6a43728d59024987faf +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Fri Feb 25 20:17:22 2011 +0100 + + Updated Slovenian translation + + po/sl.po | 47 ++++++++++++++++++++++++++++++++++++++--------- + 1 file changed, 38 insertions(+), 9 deletions(-) + +commit 39da43ff56ebcc1156cc642da5df112c720bccac +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Thu Feb 24 15:20:32 2011 +0200 + + Updated Arabic translation + + po/ar.po | 11 +++++++---- + 1 file changed, 7 insertions(+), 4 deletions(-) + +commit 38ca3f8221ddf074ff4701493f9e5e8e10c1cbb9 +Author: Matthias Clasen <mclasen@redhat.com> +Date: Thu Feb 24 13:39:14 2011 +0200 + + Bug 642969 - "Open Background Preferences" does not work + + src/eog-window.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit 82b08dab95227030b71c6a4ac1d974c31c21d801 +Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> +Date: Wed Feb 23 00:46:45 2011 +0900 + + Updated Japanese translation + + po/ja.po | 690 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 363 insertions(+), 327 deletions(-) + +commit 2abdb258e4460737a9be9880d389be9390d57442 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 21 23:58:18 2011 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 3db7cad03560931bea7054ddb60cc4653d7d480f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 21 23:51:40 2011 +0100 + + Prepare for release 2.91.90 + + NEWS | 29 +++++++++++++++++++++++++++++ + 1 file changed, 29 insertions(+) + +commit 3cd416e89c53e208cc6a85a2dc4347d2072fc7fa +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sun Feb 20 14:56:13 2011 +0100 + + Updated Spanish translation + + help/es/es.po | 782 +++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 415 insertions(+), 367 deletions(-) + +commit e57cc7b0f3bcb509f07ed8d25601c132d4ab2159 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sun Feb 20 14:51:41 2011 +0100 + + Updated Spanish translation + + help/es/es.po | 790 +++++++++++++++++++++++++++------------------------------- + 1 file changed, 371 insertions(+), 419 deletions(-) + +commit 115c67b59047cf0a9a34d93c804056b6c2e34743 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Thu Feb 17 14:51:49 2011 +0100 + + Updated Basque language + + po/eu.po | 33 ++++++++++++++++++--------------- + 1 file changed, 18 insertions(+), 15 deletions(-) + +commit c908967762671ef3d230d2da9641654e893d51a6 +Author: Alexander Shopov <ash@kambanaria.org> +Date: Wed Feb 16 22:29:31 2011 +0200 + + Updated Bulgarian translation + + po/bg.po | 34 +++++++++++++++++----------------- + 1 file changed, 17 insertions(+), 17 deletions(-) + +commit 64ffb683343d9af629671ea82c85f91130c3ea7d +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 14 23:48:31 2011 +0100 + + Make setting the image view background color work again + + The color was assigned to the parent container and not + to the drawing area. That made it draw the default theme + background color all the time instead. + + src/eog-scroll-view.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 06d62c58d18a82974c6ef3d909d6056786015f23 +Author: Garrett Regier <alias301@gmail.com> +Date: Mon Feb 14 05:27:42 2011 -0800 + + Update to latest libpeas API changes + + Plugin loaders now must be enabled + not disabled. + + configure.ac | 4 ++-- + src/eog-plugin-engine.c | 4 +--- + src/eog-preferences-dialog.c | 2 +- + 3 files changed, 4 insertions(+), 6 deletions(-) + +commit 09902c9b2cd95a107121861104d5c29c6e835dca +Author: Sweta Kothari <swkothar@redhat.com> +Date: Mon Feb 14 15:21:07 2011 +0530 + + Updated Gujarati Translations + + po/gu.po | 1089 ++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 640 insertions(+), 449 deletions(-) + +commit 4975a3312afea6ca0d63d1e4274417f1bc201fae +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sun Feb 13 14:03:24 2011 +0100 + + Updated Galician translations + + po/gl.po | 33 ++++++++++++++++++--------------- + 1 file changed, 18 insertions(+), 15 deletions(-) + +commit 30533d4140c33ae8f88a2d1472eacbf6b19ad258 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sat Feb 12 20:37:15 2011 +0100 + + Updated Slovenian translation + + po/sl.po | 32 +++++++++++++++++--------------- + 1 file changed, 17 insertions(+), 15 deletions(-) + +commit 465b69f291fce62ec895fc4aa2e54b7b2ac32a9d +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Feb 12 14:42:38 2011 +0100 + + Updated Spanish translation + + po/es.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 72bbac443a1e77557b9109fcbe979afc246411b9 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Feb 12 14:38:22 2011 +0100 + + Updated Spanish translation + + po/es.po | 375 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 184 insertions(+), 191 deletions(-) + +commit 278e4cf75cb46dfdb2ac7e4c879f0c4716d62dc7 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sat Feb 12 13:50:20 2011 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 36 ++++++++++++++++++------------------ + 1 file changed, 18 insertions(+), 18 deletions(-) + +commit 5f093beca5b397684ad68204f2a8718328427197 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Sat Feb 12 00:20:55 2011 +0200 + + Updated Hebrew translation. + + po/he.po | 372 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 183 insertions(+), 189 deletions(-) + +commit daaacb7d82b1797fda066fb16690a7df54ec29fa +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Feb 11 11:22:35 2011 +0100 + + [l10n] Updated German translation + + po/de.po | 39 +++++++++++++++++++++------------------ + 1 file changed, 21 insertions(+), 18 deletions(-) + +commit b23a2ba04cbb6f36e55bb7e74a0d0f829df78b43 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Feb 9 18:23:50 2011 +0100 + + Migrate GSettings schema paths to /org/gnome prefix + + Appears to be the "official" path. + + data/org.gnome.eog.gschema.xml.in.in | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit f86e8b86c9043c92904961e79e60b76891927072 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Wed Feb 9 01:02:08 2011 +0200 + + Updated Arabic translation + + po/ar.po | 37 ++++++++++++++++++++----------------- + 1 file changed, 20 insertions(+), 17 deletions(-) + +commit 1d1c144dfa0e2d93f695c35048413512dd4cf1a2 +Author: Ivar Smolin <okul@linux.ee> +Date: Tue Feb 8 21:31:16 2011 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 73 +++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 38 insertions(+), 35 deletions(-) + +commit 63dc212c5e310cb04d5b3a3b88c957f9cdf0ef45 +Author: Daniel Nylander <po@danielnylander.se> +Date: Tue Feb 8 00:26:08 2011 +0100 + + Updated Swedish translation + + po/sv.po | 401 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 191 insertions(+), 210 deletions(-) + +commit c19f48f9fccf951fa7557c00635b529b7eb22211 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 7 21:03:54 2011 +0100 + + Remove specific file format filters from "Open Image"-dialog + + Simplify filter list to either show all files or just the supported + image files in a folder. Also fix list capitalization. Fixes bug 641107. + + src/eog-file-chooser.c | 66 +++++++++++++++++++++++++++++--------------------- + 1 file changed, 38 insertions(+), 28 deletions(-) + +commit c2eb7259cad5d264c0d6c1c5aa8b7c403b472252 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Sat Feb 5 10:15:03 2011 +0100 + + Updated Spanish translation + + help/es/es.po | 780 +++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 414 insertions(+), 366 deletions(-) + +commit 3859553433838e97367e7678f9da4ba2bcc7f973 +Author: Cosimo Cecchi <cosimoc@gnome.org> +Date: Fri Feb 4 12:00:14 2011 -0500 + + all: fix build warnings with GCC 4.6 + + https://bugzilla.gnome.org/show_bug.cgi?id=641519 + + cut-n-paste/toolbar-editor/egg-toolbars-model.c | 2 +- + src/eog-exif-details.c | 8 ------- + src/eog-jobs.c | 19 --------------- + src/eog-list-store.c | 1 + + src/eog-print-preview.c | 5 ---- + src/eog-scroll-view.c | 6 ----- + src/eog-window.c | 31 +------------------------ + 7 files changed, 3 insertions(+), 69 deletions(-) + +commit 7328d804bc23a4df5bb9c9cbf82990f831aaaaa5 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Thu Feb 3 13:53:13 2011 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 359 ++++++++++++++++++++++++++++++------------------------------ + po/zh_TW.po | 359 ++++++++++++++++++++++++++++++------------------------------ + 2 files changed, 362 insertions(+), 356 deletions(-) + +commit 0851445abda10766cf938e29403b2bee6773f770 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 31 23:09:27 2011 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a2654493d20bb2cf5006f60c8f5822982c4d6725 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 31 23:05:22 2011 +0100 + + Prepare for release 2.91.7 + + NEWS | 27 +++++++++++++++++++++++++++ + 1 file changed, 27 insertions(+) + +commit c016eab127937dfbf5bf366b231fb4ed73146a6f +Author: Mario Blättermann <mariobl@gnome.org> +Date: Mon Jan 31 20:05:23 2011 +0100 + + [l10n] Updated German doc translation + + help/de/de.po | 1021 +++++++++++++++++---------------------------------------- + 1 file changed, 294 insertions(+), 727 deletions(-) + +commit f2163734201909ed18d42b7cdcce527090f9083b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 21:51:08 2011 +0100 + + Correct the menupaths in the help manual to match the UI + + Also remove some now-invalid paragraphs and keyboard shortcuts. + Fixes bug 628547. + + help/C/eog.xml | 56 ++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 30 insertions(+), 26 deletions(-) + +commit a2955464b8320ee7b8e39c6f022820d3b36ec144 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 21:14:47 2011 +0100 + + Fix introspection scanner warning + + src/eog-properties-dialog.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 7eeb6c8c0e55a3ad954cde4a6fed91ea7f89691c +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 21:12:11 2011 +0100 + + Use g_irepository_require_private to load eog's private typelib + + src/eog-plugin-engine.c | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +commit 659f39063eb4f9af046cb5991e887bdf3c20e62f +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 21:04:16 2011 +0100 + + Stop message area constructors from being introspected + + In their current form they are not introspected correctly yet. + + src/eog-error-message-area.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit ca255572d4e2f805d274daca07cdb4ec3b960cc8 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 20:43:11 2011 +0100 + + Further API doc warning fixes + + doc/reference/eog-sections.txt | 3 +++ + src/eog-list-store.c | 3 +-- + 2 files changed, 4 insertions(+), 2 deletions(-) + +commit 46755d7788fbe30906d2e74192401a25c9f920ff +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 20:17:20 2011 +0100 + + Remove chapters of dropped plugin classes from API docs + + doc/reference/eog-docs.sgml.in | 2 -- + 1 file changed, 2 deletions(-) + +commit d43c0e64d5c002385efaf95af956ff11c820ca54 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 20:13:16 2011 +0100 + + Remove Microtile Array stuff from API docs + + It's not in the build anymore and wasn't public anyway. + + doc/reference/eog-docs.sgml.in | 1 - + doc/reference/eog-sections.txt | 9 --------- + 2 files changed, 10 deletions(-) + +commit b940fc67bec4af041735f9e925ca832b6d462299 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 20:10:37 2011 +0100 + + Drop Microtile Array functions from build + + They are not used anymore in the new cairo-based drawing code. + + src/Makefile.am | 2 -- + 1 file changed, 2 deletions(-) + +commit 8db7761ea28a9c214fe02dd4aca9c25166eded68 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 20:09:08 2011 +0100 + + Disable more of the old drawing code + + We apparently didn't disable everything in the first run. + + src/eog-scroll-view.c | 14 +++++++++++--- + 1 file changed, 11 insertions(+), 3 deletions(-) + +commit 938e27dd740c4a08f09a47176fccc92fe2873c78 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 19:45:51 2011 +0100 + + Sort file lists in Makefile.am alphabetically + + Makes them easier to parse by humans. + + src/Makefile.am | 95 +++++++++++++++++++++++++++++---------------------------- + 1 file changed, 48 insertions(+), 47 deletions(-) + +commit a9029cb760020d0de65e32910f2e707c8fb19198 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 30 19:38:53 2011 +0100 + + Put EogClipboardHandler into the public API + + This could be useful to plugin authors. + + src/Makefile.am | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b4e2777aa1ead74ac748280bfd12c17ffa29779a +Author: Mahyar Moghimi <mahyar.moqimi@gmail.com> +Date: Fri Jan 28 15:41:05 2011 +0330 + + Updating Persian Translation + + po/fa.po | 1963 ++++++++++++++++++++++++++++++++++++++++++++------------------ + 1 file changed, 1386 insertions(+), 577 deletions(-) + +commit 6ac6beff4408e15fffb834aaa4b182a61bf65cdd +Author: Yanko Kaneti <yaneti@declera.com> +Date: Fri Jan 28 00:44:22 2011 +0200 + + Fix fullscreen schema key typo + + data/org.gnome.eog.gschema.xml.in.in | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 37eab9a38e401f61f64b52593fd65fb28df45b79 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Thu Jan 27 00:01:48 2011 +0100 + + QA of Galician translations + + po/gl.po | 41 +++++++++++++++++++++-------------------- + 1 file changed, 21 insertions(+), 20 deletions(-) + +commit 2b60c03f2d3b719518bd1f0b3aff8fedb2fef024 +Author: Marek Černocký <marek@manet.cz> +Date: Wed Jan 26 13:07:07 2011 +0100 + + Updated Czech translation + + po/cs.po | 654 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 362 insertions(+), 292 deletions(-) + +commit 05f90d5feac588437d0614896f2c57e93059ec4b +Author: Diego Escalante Urrelo <descalante@igalia.com> +Date: Wed Jan 19 01:15:49 2011 -0500 + + Fix gdk target detection for gdk-3.0 + + Bug #639921 + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit edda3a87ea4e7c33044378a35177d6847b7f0d09 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Fri Jan 21 00:11:10 2011 +0100 + + Updated Basque language + + po/eu.po | 646 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 340 insertions(+), 306 deletions(-) + +commit aacff55b1ab4616f58fe564b6343480c6745a217 +Author: Yuri Myasoedov <omerta13@yandex.ru> +Date: Thu Jan 20 21:46:08 2011 +0300 + + Updated Russian translation + + po/ru.po | 636 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 291 insertions(+), 345 deletions(-) + +commit cec5aba711a058d43f77c4078511994964782087 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sat Jan 15 21:06:24 2011 +0100 + + Updated Slovenian translation + + po/sl.po | 375 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 182 insertions(+), 193 deletions(-) + +commit 12ca3ebe41500cbc5bf933a29c64cd3ce365c070 +Author: Michael Kotsarinis <mk73628@gmail.com> +Date: Sat Jan 15 10:52:11 2011 +0200 + + Updated Greek translation + + help/el/el.po | 1335 ++++++++++++++------------------------------------------- + 1 file changed, 321 insertions(+), 1014 deletions(-) + +commit 0e7b17fa4b3ddf2de44fcef274a207eb2c6d7fe3 +Author: Michael Kotsarinis <mk73628@gmail.com> +Date: Sat Jan 15 10:51:55 2011 +0200 + + Updated Greek translation + + po/el.po | 632 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 333 insertions(+), 299 deletions(-) + +commit e4bbeec5ac4d4d6ab50d2225ab3e28fda2b2fce9 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 14 17:32:18 2011 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b2f4fc513c89c276e4bb30b9223e8a154e2a588a +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 14 17:27:19 2011 +0100 + + Prepare for release 2.91.6 + + NEWS | 34 +++++++++++++++++++++++++++++++++- + 1 file changed, 33 insertions(+), 1 deletion(-) + +commit 032e169d7d6e4645a10af5291d1badc38e682089 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 14 16:53:15 2011 +0100 + + Remove old python binding code and build configuration + + Although python plugins are not yet supported with the new libpeas-based + API, the old binding don't work either and aren't needed any more. + + Makefile.am | 2 +- + README | 5 +- + bindings/Makefile.am | 7 - + bindings/python/Makefile.am | 77 --- + bindings/python/eog.defs | 1230 ------------------------------------------ + bindings/python/eog.override | 126 ----- + configure.ac | 116 ---- + doc/reference/Makefile.am | 4 +- + src/Makefile.am | 25 - + src/eog-python-module.c | 527 ------------------ + src/eog-python-module.h | 72 --- + src/eog-python-plugin.c | 282 ---------- + src/eog-python-plugin.h | 55 -- + 13 files changed, 4 insertions(+), 2524 deletions(-) + +commit 200ff4ea06b05554c349d5321f25b087c078cf33 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 14 16:38:29 2011 +0100 + + Use G_DEFINE_INTERFACE for EogMetadataReader + + src/eog-metadata-reader.c | 90 +++++++++++++++++++---------------------------- + 1 file changed, 36 insertions(+), 54 deletions(-) + +commit 9ae71ccc6a0ef2970185333b59bd26f29ea57fa4 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Jan 14 00:53:16 2011 +0200 + + Remove unneeded finalize() from EogListStore + + No need to free() the private struct, since it's done automatically by + the type. + + src/eog-list-store.c | 14 -------------- + 1 file changed, 14 deletions(-) + +commit f581d73a424f8b70a33389c30e62a53dfbc8fbe0 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Jan 14 00:48:10 2011 +0200 + + Remove unused finalize/destroy methods from thumbview + + src/eog-thumb-view.c | 23 ----------------------- + 1 file changed, 23 deletions(-) + +commit a395e95c5df2c4cbae9ce749544ec62820746e40 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Jan 14 00:46:39 2011 +0200 + + Update the thumbview visible range in an idle callback + + This avoids entering in an infinite loop of unsetting a thumbnail, + relayouting the iconview, updating the adjustment, setting the + thumbnail, relayouting the iconview, updating the adjustment, + unsetting the thumbnail, and so on. + + Fixes bug #639312 + + src/eog-thumb-view.c | 69 +++++++++++++++++++++++++++++----------------------- + 1 file changed, 38 insertions(+), 31 deletions(-) + +commit fb279597bdc2a977bf29732a879468eca1be013a +Author: Alexander Shopov <ash@kambanaria.org> +Date: Thu Jan 13 22:51:27 2011 +0200 + + Updated Bulgarian translation + + po/bg.po | 438 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 219 insertions(+), 219 deletions(-) + +commit 0b98b8cc1903142112dd67ecde6a914583087da5 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Jan 11 00:11:53 2011 +0200 + + Workaround GtkIconView breakage + + By moving initialization code to the constructed() method. See #639139. + + src/eog-thumb-view.c | 129 ++++++++++++++++++++++++++++++++------------------- + 1 file changed, 80 insertions(+), 49 deletions(-) + +commit eae06a9c624b2c8bde332aa6ea8d5b64c631687b +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Wed Jan 12 11:35:02 2011 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 328 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 149 insertions(+), 179 deletions(-) + +commit 3223f831063c1fb0159e1d087c6db8140a59eb10 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 9 21:57:58 2011 +0100 + + Remove now unneeded header includes from EogPluginEngine + + These were not needed anymore after switching to libpeas. + + src/eog-plugin-engine.c | 9 --------- + 1 file changed, 9 deletions(-) + +commit 8b3e4ba3dbbe7a8b6e48a1f962e27352b8682991 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 9 21:55:12 2011 +0100 + + Disable python and seed plugin loaders for now + + They are not working very well with eog yet. + For example they prevent eog from quitting. + + src/eog-plugin-engine.c | 5 +++++ + 1 file changed, 5 insertions(+) + +commit b52e2584a1ce5e94b5824f0cae5d00a9d0ee87e1 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 9 21:33:26 2011 +0100 + + Remove deprecated comment + + src/eog-plugin-engine.c | 1 - + 1 file changed, 1 deletion(-) + +commit 1e53ed9d0eb1274c4c459b2c208af9a41e233b6a +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sun Jan 9 16:47:34 2011 +0100 + + Updated Galician translations + + po/gl.po | 382 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 193 insertions(+), 189 deletions(-) + +commit 2ce756ca0d3a773e7b35bc12d4283ba69622a941 +Author: Andika Triwidada <andika@gmail.com> +Date: Sat Jan 8 18:17:20 2011 +0700 + + Updated Indonesian translation + + po/id.po | 846 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 411 insertions(+), 435 deletions(-) + +commit 98ea2625623db8b3328e5819658e505cdccd88b5 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Sat Jan 8 08:37:07 2011 +0200 + + Updated Arabic translation + + po/ar.po | 496 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 253 insertions(+), 243 deletions(-) + +commit 95694f8b5f06b891a5e55356451ad60b53387563 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 3 21:24:45 2011 +0100 + + Fix a forgotten PeasUI-to-PeasGtk conversion and report errors + + - Print warnings when typelibs cannot be loaded. + - Try to load PeasGtk not PeasUI + + src/eog-plugin-engine.c | 26 ++++++++++++++++++++------ + 1 file changed, 20 insertions(+), 6 deletions(-) + +commit 80c6f9226aa3c7b959a18998c9bc102ece43cf50 +Author: Paul Seyfert <pseyfert@mathphys.fsk.uni-heidelberg.de> +Date: Mon Jan 3 21:57:36 2011 +0100 + + [l10n] Updated German translation + + po/de.po | 362 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 184 insertions(+), 178 deletions(-) + +commit acfc27561aff9f97126442d9522a53f51e9b871f +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 30 21:22:13 2010 +0200 + + Add an annotation glossary to the docs + + doc/reference/eog-docs.sgml.in | 1 + + 1 file changed, 1 insertion(+) + +commit e6a784eabc3d902a11d295a25c53927d7e3f014d +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 30 20:41:54 2010 +0200 + + Add GI annotations and API documents where relevant + + This suppresses many warnings during the gir file generation + + src/eog-application.c | 6 +++--- + src/eog-error-message-area.c | 17 +++++++++++++++++ + src/eog-image.c | 40 ++++++++++++++++++++++++++++++++++++++++ + src/eog-list-store.c | 2 +- + src/eog-properties-dialog.c | 11 +++++++++++ + src/eog-thumb-view.c | 4 ++-- + src/eog-thumbnail.c | 28 ++++++++++++++++++++++++++++ + src/eog-transform.c | 27 +++++++++++++++++++++++++++ + src/eog-window.c | 16 ++++++++-------- + 9 files changed, 137 insertions(+), 14 deletions(-) + +commit cddb3588d5982595ce7e230ea0e045454da8ff90 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Jan 3 18:52:29 2011 +0200 + + gtk-doc janitoring + + doc/reference/eog-docs.sgml.in | 2 + + doc/reference/eog-sections.txt | 142 ++++++++++++++++++++++------------------- + src/eog-exif-util.c | 2 +- + src/eog-util.h | 2 +- + 4 files changed, 81 insertions(+), 67 deletions(-) + +commit 77b5f2163a77f1b0eafaf8279e3fb8cefd54c88d +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 3 13:49:33 2011 +0100 + + Raise EOG_API_VERSION to 3.0 + + To distinguish the current API from the old API version (2.20). + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 3d3d2bb6c997ee1f72fb9f3625380fb1e5f97b7a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 3 13:41:44 2011 +0100 + + Update plugins to use EogWindowActivatable interface + + https://bugzilla.gnome.org/show_bug.cgi?id=626091 + + plugins/fullscreen/eog-fullscreen-plugin.c | 37 ++++++++-------- + plugins/fullscreen/eog-fullscreen-plugin.h | 5 ++- + plugins/reload/eog-reload-plugin.c | 34 ++++++++------- + plugins/reload/eog-reload-plugin.h | 3 +- + plugins/statusbar-date/eog-statusbar-date-plugin.c | 50 +++++++++++----------- + plugins/statusbar-date/eog-statusbar-date-plugin.h | 5 ++- + 6 files changed, 73 insertions(+), 61 deletions(-) + +commit f984f253e50e842b7c58b41593954553798f3f95 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Aug 9 01:15:17 2010 +0300 + + Load the Eog namespace from a private directory + + For now, this is done by adding the private directory to the search + path. For whatever reason, g_irepository_require_private() doesn't + work for me. + + This is enough to have python plugins working already + + https://bugzilla.gnome.org/show_bug.cgi?id=626224 + + src/Makefile.am | 3 ++- + src/eog-plugin-engine.c | 15 +++++++++++++++ + 2 files changed, 17 insertions(+), 1 deletion(-) + +commit 397a6a5399aa7e68469e18387de5e40f3875c440 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 2 23:54:13 2011 +0100 + + Add our own activatable interface to EogWindow + + Improves typesafety by explicitly passing the EogWindow and allows + us to extend the interface if necessary. + + https://bugzilla.gnome.org/show_bug.cgi?id=626091 + + src/Makefile.am | 2 ++ + src/eog-window-activatable.c | 86 ++++++++++++++++++++++++++++++++++++++++++++ + src/eog-window-activatable.h | 68 +++++++++++++++++++++++++++++++++++ + src/eog-window.c | 6 ++-- + 4 files changed, 160 insertions(+), 2 deletions(-) + +commit f457e6cd2f9b25194145681109ae4bd7f3b4ee7f +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 23 16:27:13 2010 +0200 + + Dont use EogExifData in the C api + + https://bugzilla.gnome.org/show_bug.cgi?id=626257 + + plugins/statusbar-date/eog-statusbar-date-plugin.c | 2 +- + src/eog-exif-util.c | 2 ++ + src/eog-exif-util.h | 8 ++++---- + src/eog-image.c | 4 ++-- + src/eog-image.h | 2 +- + src/eog-metadata-reader.c | 4 ++-- + src/eog-metadata-reader.h | 2 +- + src/eog-properties-dialog.c | 2 +- + 8 files changed, 14 insertions(+), 12 deletions(-) + +commit d3ee0241723db6729cb7331428293c9dc95e8cdd +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 23 16:28:08 2010 +0200 + + Don't make enum types internal + + https://bugzilla.gnome.org/show_bug.cgi?id=626257 + + src/eog-enum-types.h.template | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b316c9e0b30a8c6d67feb8f21a20268e18c8cc3d +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Aug 9 00:55:11 2010 +0300 + + Add the necessary machinery to generate the introspection data from eog + + Annotations are still missing, but this provides enough for basic + introspection usage + + https://bugzilla.gnome.org/show_bug.cgi?id=626257 + + configure.ac | 11 +++++++++++ + src/Makefile.am | 44 ++++++++++++++++++++++++++++++++++++-------- + src/main.c | 6 ++++++ + 3 files changed, 53 insertions(+), 8 deletions(-) + +commit fe429c101581207918938079e8e8852c495fd6f6 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 3 00:21:07 2011 +0100 + + Update to latest git.mk from Pango + + git.mk | 17 +++++++++++++++-- + 1 file changed, 15 insertions(+), 2 deletions(-) + +commit af184104018f36272ff8e49012c52d503f48eae7 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 2 22:48:28 2011 +0100 + + Adapt POTFILES list to the plugin system changes + + https://bugzilla.gnome.org/show_bug.cgi?id=626091 + + po/POTFILES.in | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +commit 8b0acfddc52c220393770a9895b6b56cab7821fd +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 2 22:27:10 2011 +0100 + + Fix broken application shutdown with new plugin system + + The PeasExtensionSet was basically keeping a reference to the window + preventing it from being destroyed correctly. Then the plugins leaked a + reference to the window as well. + + https://bugzilla.gnome.org/show_bug.cgi?id=626091 + + plugins/fullscreen/eog-fullscreen-plugin.c | 15 +++++++--- + plugins/reload/eog-reload-plugin.c | 15 +++++++--- + plugins/statusbar-date/eog-statusbar-date-plugin.c | 15 +++++++--- + src/eog-window.c | 35 +++++++++++----------- + 4 files changed, 50 insertions(+), 30 deletions(-) + +commit 40bedbf33812e65f4a8e79691b1fadfaace94035 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 2 21:51:03 2011 +0100 + + More fixes to work with libpeas-0.7 + + - Plugin keyfile extension and content was simplified + - Remove unneeded and broken libpeasui includes + - Search paths are no longer a constructor property + + https://bugzilla.gnome.org/show_bug.cgi?id=626091 + + plugins/Makefile.am | 10 +++++----- + ...gin.desktop.in => fullscreen.plugin.desktop.in} | 2 +- + plugins/reload/eog-reload-plugin.c | 1 - + ...-plugin.desktop.in => reload.plugin.desktop.in} | 2 +- + plugins/statusbar-date/eog-statusbar-date-plugin.c | 1 - + ...desktop.in => statusbar-date.plugin.desktop.in} | 3 +-- + src/eog-plugin-engine.c | 22 +++++++++++----------- + 7 files changed, 19 insertions(+), 22 deletions(-) + +commit cf39e40b422dad061184ac67028661bd4dcb0106 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Aug 4 17:00:41 2010 +0300 + + Port the existing plugins to libpeas + + https://bugzilla.gnome.org/show_bug.cgi?id=626091 + + plugins/fullscreen/eog-fullscreen-plugin.c | 122 ++++++++++------ + plugins/fullscreen/eog-fullscreen-plugin.h | 12 +- + plugins/reload/eog-reload-plugin.c | 142 ++++++++++++------- + plugins/reload/eog-reload-plugin.h | 14 +- + plugins/statusbar-date/eog-statusbar-date-plugin.c | 154 +++++++++++++-------- + plugins/statusbar-date/eog-statusbar-date-plugin.h | 13 +- + 6 files changed, 293 insertions(+), 164 deletions(-) + +commit 9afc5483b615039a580e295fe08d7b8ec524759c +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 2 20:24:34 2011 +0100 + + Update plugin engine code to work with libpeas-0.7 + + - PeasPluginEngine lost the "app-name" property + - libpeasui became libpeas-gtk + + https://bugzilla.gnome.org/show_bug.cgi?id=626091 + + configure.ac | 4 ++-- + src/eog-plugin-engine.c | 1 - + src/eog-preferences-dialog.c | 5 ++--- + 3 files changed, 4 insertions(+), 6 deletions(-) + +commit 1f79c321367c91c8e9063f1343a7e4ce4199c4d5 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Aug 4 16:55:34 2010 +0300 + + Port the plugin system to use libpeas + + This removes the internal implementation of EogPlugin, + EogPluginManager, EogModule, and EogPluginEngine in favor of the + implementation in libpeas and libpeasui. + + https://bugzilla.gnome.org/show_bug.cgi?id=626091 + + configure.ac | 4 +- + src/Makefile.am | 8 +- + src/eog-application.c | 5 + + src/eog-application.h | 2 + + src/eog-module.c | 167 -------- + src/eog-module.h | 72 ---- + src/eog-plugin-engine.c | 929 +++---------------------------------------- + src/eog-plugin-engine.h | 73 +--- + src/eog-plugin-manager.c | 917 ------------------------------------------ + src/eog-plugin-manager.h | 61 --- + src/eog-plugin.c | 108 ----- + src/eog-plugin.h | 222 ----------- + src/eog-preferences-dialog.c | 5 +- + src/eog-window.c | 46 ++- + src/main.c | 3 - + 15 files changed, 125 insertions(+), 2497 deletions(-) + +commit 3fd1cbb9910af433100d8d4b120158a7c8fc2784 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 2 20:00:53 2011 +0100 + + Add some API docs to EogScrollView's enum types + + src/eog-scroll-view.c | 2 +- + src/eog-scroll-view.h | 19 +++++++++++++++++++ + 2 files changed, 20 insertions(+), 1 deletion(-) + +commit 1ed726c98867a2f8a89998d18867067d148e6bf3 +Author: Daniel Nylander <po@danielnylander.se> +Date: Sun Jan 2 21:56:04 2011 +0100 + + Updated Swedish translation + + po/sv.po | 692 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 402 insertions(+), 290 deletions(-) + +commit cba590eb29b14250fc2934c9b3c3de0b62a244b4 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sun Jan 2 18:33:10 2011 +0100 + + Updated Norwegian bokmål translation from Torstein Adolf Winterseth + + po/nb.po | 288 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 149 insertions(+), 139 deletions(-) + +commit 503b3bffb3a83b23fdaeb78016049715911cb03e +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Sun Jan 2 18:44:56 2011 +0200 + + Updated Hebrew translation. + + po/he.po | 238 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 123 insertions(+), 115 deletions(-) + +commit f149234b44be6d9e6b2c7abf14f04a04195069d2 +Author: Ivar Smolin <okul@linux.ee> +Date: Sat Jan 1 23:09:15 2011 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 20 +++++++++++++------- + 1 file changed, 13 insertions(+), 7 deletions(-) + +commit 5b1317375f7079c1bca69cfd48b3bc7a236d4b72 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Jan 1 12:50:47 2011 +0100 + + Updated Spanish translation + + po/es.po | 244 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 127 insertions(+), 117 deletions(-) + +commit 031908baeeac94a398e44e53253ee8454f834242 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Dec 31 18:30:12 2010 +0100 + + Unite copy to clipboard functions in a single menu entry + + Also assign a shortcut and icon to it. + + data/eog-ui.xml | 3 --- + src/eog-window.c | 38 ++------------------------------------ + 2 files changed, 2 insertions(+), 39 deletions(-) + +commit dcb56b03e9c9282138b9da94eddcedfc401ab750 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Dec 31 18:21:45 2010 +0100 + + Allow handling multiple clipboard data formats from one menu entry + + The new class "snapshots" the required data from the given EogImage + and keeps it around for clipboard usage until the clipboard gets reset. + + src/Makefile.am | 2 + + src/eog-clipboard-handler.c | 325 ++++++++++++++++++++++++++++++++++++++++++++ + src/eog-clipboard-handler.h | 63 +++++++++ + src/eog-window.c | 10 +- + 4 files changed, 395 insertions(+), 5 deletions(-) + +commit 0b209b1ff16e863e60a1d86413aa57c5fbde76b0 +Author: Adrian Hands <handsadrian@gmail.com> +Date: Fri Dec 31 14:34:58 2010 +0100 + + Add Copy Image and Copy Path to clipboard functionality + + Fixes bug 78514. + + data/eog-ui.xml | 9 ++++++++ + src/eog-window.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 72 insertions(+) + +commit 45488632bf62cd6891a41c81fcbe4c8a68d55555 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 30 21:14:47 2010 +0200 + + Add a appendix to the main reference document + + doc/reference/eog-docs.sgml.in | 139 ++++++++++++++++++++++------------------- + 1 file changed, 75 insertions(+), 64 deletions(-) + +commit 2def5c1918f1e59647b161b8991bc67a2127f63f +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 30 20:58:47 2010 +0200 + + Small code fix + + src/eog-image.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +commit ae39227b82978abf2b69baff0e46d8bba8d3474e +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 30 20:58:32 2010 +0200 + + Improve the API consistency in EogImageSaveInfo + + This will make things better for introspection + + doc/reference/eog-sections.txt | 6 +++--- + src/eog-image-save-info.c | 11 ++++------- + src/eog-image-save-info.h | 17 ++++++++++------- + src/eog-jobs.c | 12 ++++++------ + 4 files changed, 23 insertions(+), 23 deletions(-) + +commit 4dff15d5c532153176489ed598d24bda2a4d936c +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Tue Dec 28 23:30:55 2010 +0100 + + Updated Slovenian translation + + po/sl.po | 277 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 141 insertions(+), 136 deletions(-) + +commit 943a59737c800801055478fb4b6db1493e376fee +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 28 13:19:50 2010 +0100 + + Fix EogPrintImageSetupPrivate type naming/typedefing to make sense + + src/eog-print-image-setup.c | 2 +- + src/eog-print-image-setup.h | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit 1f295282f171496d59eb850a8f49d5d7644fb658 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Sun Dec 26 19:53:32 2010 +0200 + + Updated Hebrew translation. + + po/he.po | 272 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 138 insertions(+), 134 deletions(-) + +commit d35964053ae26738a996d4589eed8989930d30e4 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sun Dec 26 15:00:38 2010 +0700 + + Updated Vietnamese translation + + po/vi.po | 202 +++++++++++++++++++++++---------------------------------------- + 1 file changed, 73 insertions(+), 129 deletions(-) + +commit bf3877de4f4310f3d00dc475ddc288627bd421d9 +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Sun Dec 26 14:45:09 2010 +0700 + + po/vi.po: import from Damned Lies + + po/vi.po | 1073 +++++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 682 insertions(+), 391 deletions(-) + +commit ebe5fba755f422f3e8aa764637d200d607ff9628 +Author: Daniel Mustieles <daniel.mustieles@gmail.com> +Date: Thu Dec 23 20:21:14 2010 +0100 + + Updated Spanish translation + + po/es.po | 276 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 139 insertions(+), 137 deletions(-) + +commit 105ab9e0f233634210b8fe6cb9c46b0c7740a397 +Author: Ivar Smolin <okul@linux.ee> +Date: Thu Dec 23 19:32:20 2010 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 7 +++++-- + 1 file changed, 5 insertions(+), 2 deletions(-) + +commit adc355d063324cbc9d233d115ec675d99e3af5d2 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 23 16:58:23 2010 +0200 + + Simplify some code + + src/eog-window.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit afc1978771501d201ba6f0cd2cd7c0f4ec45af2e +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 23 10:20:13 2010 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d71c9cf9881e9de032010a2dccb15c715d88d502 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 23 00:16:59 2010 +0200 + + Prepare release 2.91.5 + + NEWS | 5 +++++ + 1 file changed, 5 insertions(+) + +commit ec6c2435c16a003f252afbe318b3c656d5e9de0b +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Dec 23 00:13:09 2010 +0200 + + Replace gdk_spawn_command_line_on_screen() with g_app_info_launch() + + This fixes the build with gtk 2.91.7 + + configure.ac | 2 +- + src/eog-window.c | 38 ++++++++++++++++++++++++++++++++------ + 2 files changed, 33 insertions(+), 7 deletions(-) + +commit de6d16dbb8ebef044c06f41a2f7fe3938c163614 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 21 19:02:28 2010 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit de9de20b47239f14db76b767b71e378488f2226c +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 21 18:57:32 2010 +0100 + + Prepare for release 2.91.4 + + NEWS | 23 +++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + +commit aa1ceac427d99e70bc2747b4503f6307f4f841e3 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 21 18:33:06 2010 +0100 + + Really fix build without libexif + + Add changes forgotten in commit ebb9e525. Fixes bug 637648. + + src/eog-image.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 72e3254ed7f88b4c3b09d0bf98f43482404e8450 +Author: Ivar Smolin <okul@linux.ee> +Date: Mon Dec 20 15:22:25 2010 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit ebb9e525a84fb169c79908ff646288550f7e480a +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Dec 18 15:35:15 2010 +0100 + + Fix build without libexif + + src/eog-image.h | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +commit 796aae00058655d6f9e796f36fd7420991c657a7 +Author: Marek Kašík <mkasik@redhat.com> +Date: Sat Dec 18 15:19:14 2010 +0100 + + Use default page settings when opening print dialog the first time + + Use the default page setup the first time after application start. + Then re-use the last used page setup for rest of the time. + Fixes bug 549039. + + src/eog-window.c | 24 +++++++++++++++++++++--- + 1 file changed, 21 insertions(+), 3 deletions(-) + +commit 3cc45bdc35fbfd14627d266c0344f677d2037dcb +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Dec 18 13:52:04 2010 +0100 + + Define EogExifData type using G_DEFINE_BOXED_TYPE macro + + configure.ac | 2 +- + src/eog-exif-util.c | 15 +++------------ + 2 files changed, 4 insertions(+), 13 deletions(-) + +commit b88d3713fe45a4bab1bd24ac8ff60551c5c31d49 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Aug 9 00:51:06 2010 +0300 + + Wrap ExifData in a EogExifData boxed type + + This is for better interaction with bindings + + https://bugzilla.gnome.org/show_bug.cgi?id=626257 + + plugins/statusbar-date/eog-statusbar-date-plugin.c | 10 ++++---- + src/eog-exif-util.c | 28 +++++++++++++++++++++- + src/eog-exif-util.h | 10 +++++++- + src/eog-image.c | 4 ++-- + src/eog-image.h | 3 ++- + src/eog-metadata-reader.c | 4 ++-- + src/eog-metadata-reader.h | 4 ++-- + src/eog-properties-dialog.c | 4 ++-- + src/eog-thumb-view.c | 2 +- + 9 files changed, 51 insertions(+), 18 deletions(-) + +commit 5f66a42b0f445b181b4612474af43b7304104684 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Aug 9 00:48:08 2010 +0300 + + Rename EogDebugSection to EogDebug + + Also rename EOG_NO_DEBUG to EOG_DEBUG_NO_DEBUG for clarity + in bindings. + + https://bugzilla.gnome.org/show_bug.cgi?id=626257 + + src/eog-debug.c | 10 +++++----- + src/eog-debug.h | 8 ++++---- + 2 files changed, 9 insertions(+), 9 deletions(-) + +commit 9c10f508e0be7f2036d993eff6e6fbd40aefea76 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Thu Dec 9 19:58:56 2010 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 533 +++++++++++++++++++++++++++++++-------------------------- + po/zh_TW.po | 556 +++++++++++++++++++++++++++++++++--------------------------- + 2 files changed, 599 insertions(+), 490 deletions(-) + +commit 6a406bf93969a73159b67eefe125f700a1f82126 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Dec 6 21:55:25 2010 +0100 + + Ignore drag&drop requests from a window onto itself + + Avoids accidential DnD of an image into the same window (e.g. while + trying to scroll) and the resulting reload. Fixes bug 585069. + + src/eog-window.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +commit 75301e4cce11e4b6a5d649f65329e317dc024ef2 +Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> +Date: Fri Dec 3 05:40:41 2010 +0200 + + Updated Romanian translation + + po/ro.po | 612 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 340 insertions(+), 272 deletions(-) + +commit de2cfab8546071c63be52181bdfab9f144f38353 +Author: Djavan Fagundes <djavan@comum.org> +Date: Thu Dec 2 13:45:32 2010 -0200 + + Updated Brazilian Portuguese translation for manual + + help/pt_BR/pt_BR.po | 400 ++++++++++++++++++++++++++++------------------------ + 1 file changed, 218 insertions(+), 182 deletions(-) + +commit 685ea8bd493b3832f9e245dd2da294ef9edf15c3 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Dec 2 15:30:07 2010 +0100 + + Make toolbar editor expand vertically to fully use the dialog's space + + Editor only showed a single row of items due to the changed expand + behaviour in GTK+-3 before. + + src/eog-window.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit 596040f0ec1f3a7db6c888307ce9d521571f58a3 +Author: Ivar Smolin <okul@linux.ee> +Date: Wed Dec 1 20:27:27 2010 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit c5de0715e2607a4fa8f9681eeaf8c0d3d9dca9be +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 29 22:54:44 2010 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 28b502735a23a883495846991c31391414f27a0f +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 29 22:49:34 2010 +0100 + + Prepare for release 2.91.3 + + NEWS | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +commit 47709d4be672da5c250de83204f13d118504bdf3 +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Mon Nov 29 19:50:36 2010 +0700 + + Updated Thai translation. + + po/th.po | 659 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 378 insertions(+), 281 deletions(-) + +commit 14c9c1844d95c3248bc40204a79cf7b4274e386c +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Nov 20 14:27:18 2010 +0100 + + Fix installing UI data files and Automake warnings + + data/Makefile.am | 12 +++--------- + 1 file changed, 3 insertions(+), 9 deletions(-) + +commit 1bff58f772de4aad8cbf0886e46e1c26e075b54b +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Nov 20 14:18:16 2010 +0100 + + Respect lockdown setting for page setup again + + This apparently got broken when the page setup dialog was merged into + the general print dialog. + + src/eog-window.c | 13 +++++++++---- + 1 file changed, 9 insertions(+), 4 deletions(-) + +commit 99f8997a71a6fecd70512432eb3c481d0dc34d8b +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Nov 20 14:11:15 2010 +0100 + + Drop GConf dependency + + Concludes the GSettings migration. Closes bug 620121. + + configure.ac | 3 --- + src/eog-config-keys.h | 2 +- + src/eog-window.c | 22 ---------------------- + 3 files changed, 1 insertion(+), 26 deletions(-) + +commit 653cf389ef92241aa2a66d04b3dad71eeacd4bf3 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Nov 20 14:03:45 2010 +0100 + + Convert lockdown settings from GConf to GSettings + + Part of bug 620121. + + src/eog-config-keys.h | 8 +++++--- + src/eog-window.c | 49 +++++++++++++++++++++---------------------------- + 2 files changed, 26 insertions(+), 31 deletions(-) + +commit 9bc346bc624c7fde7c3cd878b9f35cb65795bb41 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Nov 20 13:07:14 2010 +0100 + + Convert background image setting fro GConf to GSettings + + Adds dependency on gsettings-desktop-schemas package. + Part of bug 620121. + + configure.ac | 6 ++++-- + src/eog-config-keys.h | 3 ++- + src/eog-window.c | 10 ++++------ + 3 files changed, 10 insertions(+), 9 deletions(-) + +commit 9f4b5f4579bb181772c15ad8982178aa40f1ae82 +Author: Gheyret T.Kenji <gheyret@gmail.com> +Date: Sat Nov 20 11:01:23 2010 +0100 + + Added UG translation + + po/ug.po | 26 ++++---------------------- + 1 file changed, 4 insertions(+), 22 deletions(-) + +commit d26606d6273427777790e998902d86acd57c3393 +Author: Baptiste Mille-Mathias <baptiste.millemathias@gmail.com> +Date: Fri Nov 19 15:58:54 2010 +0100 + + Remove any reference to glade* (bug 634942) + + README | 4 ++-- + bindings/python/eog.defs | 2 +- + data/Makefile.am | 6 +++--- + src/eog-dialog.c | 8 ++++---- + src/eog-dialog.h | 4 ++-- + 5 files changed, 12 insertions(+), 12 deletions(-) + +commit 3e2af1c2ba6450075f0315a5230015853b97f87d +Author: Baptiste Mille-Mathias <baptiste.millemathias@gmail.com> +Date: Mon Nov 15 15:21:09 2010 +0100 + + Fix build against GNOME 3 platform + + https://bugzilla.gnome.org/show_bug.cgi?id=634907 + + configure.ac | 2 +- + src/eog-file-chooser.c | 2 +- + src/eog-thumbnail.c | 2 +- + 3 files changed, 3 insertions(+), 3 deletions(-) + +commit 77c9d63062e17eb69a8de28be25e67a22ff3ad5d +Author: Baptiste Mille-Mathias <baptiste.millemathias@gmail.com> +Date: Mon Nov 15 22:05:35 2010 +0100 + + Revert "Removing any reference to *glade." + + This reverts commit 8dcfe6669500a15b11e15321c64d5b8ed756d715. + + README | 4 ++-- + src/eog-dialog.c | 8 ++++---- + src/eog-dialog.h | 4 ++-- + 3 files changed, 8 insertions(+), 8 deletions(-) + +commit 8dcfe6669500a15b11e15321c64d5b8ed756d715 +Author: Baptiste Mille-Mathias <baptiste.millemathias@gmail.com> +Date: Mon Nov 15 21:52:02 2010 +0100 + + Removing any reference to *glade. + + README | 4 ++-- + src/eog-dialog.c | 8 ++++---- + src/eog-dialog.h | 4 ++-- + 3 files changed, 8 insertions(+), 8 deletions(-) + +commit 1519e3c4d830c8917adcc688c45bc7a6b5ef922e +Author: Gheyret T.Kenji <gheyret@gmail.com> +Date: Sat Nov 13 21:50:21 2010 +0100 + + Added UG translation + + po/ug.po | 3359 +++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 1672 insertions(+), 1687 deletions(-) + +commit 46b027696fd73c115efe6d13421105750a0bf86c +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Nov 13 14:08:44 2010 +0100 + + Workaround concurrency issue with statusbar-date plugin + + Make sure that only an image loading job does autorotation. A metadata + loading job has no use for this. Works around lost signals when the + statusbar-date plugin is activated. Works around bug 622161. + + src/eog-image.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +commit 1564455e2585cfee8dd30d7adbe65715608aee03 +Author: Javier Jardón <jjardon@gnome.org> +Date: Tue Nov 9 03:20:29 2010 +0100 + + Use gtk_paned_new() instead gtk_[h|v]paned_new() + + src/eog-window.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 77de86634dfe2c817f4d403ced8e9fd8a9cf9d90 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 8 23:24:30 2010 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0b7990c56ec3c4e6fc0c706767cf4cdba2daa85c +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Nov 8 23:20:07 2010 +0100 + + Prepare for release 2.91.2 + + NEWS | 29 +++++++++++++++++++++++++++++ + 1 file changed, 29 insertions(+) + +commit 88407daf16b509dc33256ad11a8941a8eb4e3eb4 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Nov 2 20:20:02 2010 +0100 + + Use GRandom as random value generator for random image function + + Seems to have a better distribution. At least works better with lower + image counts. Fixes bug 633764. + + src/eog-thumb-view.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 474b6c1b1e36e69f8f131cbf5d4f05e20f452928 +Author: Ivar Smolin <okul@linux.ee> +Date: Mon Nov 1 08:16:41 2010 +0200 + + [l10n] Updated Estonian translation + + po/et.po | 55 +++++++++++++++++++++++++++++++++++++------------------ + 1 file changed, 37 insertions(+), 18 deletions(-) + +commit dde2c098d66c92c4bdbeedff77463780711c9b75 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sun Oct 31 20:25:26 2010 +0100 + + Updated Slovenian translation + + po/sl.po | 462 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 262 insertions(+), 200 deletions(-) + +commit 931cdd9e3fdc35f94494a40640f3eae694dbfc07 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Oct 31 19:08:43 2010 +0100 + + Refactor XDG folders migration + + Merges the multiple migration points into a single one. + Use GIO for moving files which avoids overwriting present stuff. + Remove old config folder once it's empty. Only migrate files that + actually belong to eog. Concludes bug 522806. + + src/eog-application.c | 26 ++---------- + src/eog-util.c | 109 ++++++++++++++++++++++++++++++++++++-------------- + 2 files changed, 84 insertions(+), 51 deletions(-) + +commit c92e86a6e9816ac5a5a1a97ac6786a06aed9cb81 +Author: Sebastian Geiger <sbastig@invisco.de> +Date: Sat Aug 21 12:44:48 2010 +0200 + + Add code for migrating config and cache file to XDG folders + + Move files from old config dir into XDG-based config folder. + Part of bug 522806. + + src/eog-application.c | 33 +++++++++++++++++++++++++-------- + src/eog-util.c | 32 ++++++++++++++++++++++++++++---- + 2 files changed, 53 insertions(+), 12 deletions(-) + +commit ad1bb602f3a922681da5b9d6ae9f9cc75c8dc0ff +Author: Sebastian Geiger <sbastig@invisco.de> +Date: Sat Aug 21 12:11:30 2010 +0200 + + Place configuration files into an XDG standard config folder + + Just replaces the paths for now. Part of bug 522806. + + src/eog-application.c | 14 ++++++-------- + src/eog-util.c | 3 +-- + 2 files changed, 7 insertions(+), 10 deletions(-) + +commit f4c19dfa0db163cac91024db0ed885d614a5ef30 +Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> +Date: Sun Oct 31 14:40:17 2010 +0900 + + Updated Japanese translation + + po/ja.po | 21 ++++++++++++--------- + 1 file changed, 12 insertions(+), 9 deletions(-) + +commit 00075ab25d5bd3656a2f5f89773bd56e091d5b47 +Author: Javier Sánchez <jsanchez@deskblue.com> +Date: Sat Oct 23 23:22:19 2010 +0200 + + Make newly saved images user writable + + Doesn't occur for existing files only when saving creates a new file. + Fixes bug #589921. + + src/eog-jobs.c | 24 ++++++++++++++++++++++++ + 1 file changed, 24 insertions(+) + +commit 7a6ea9ee0e5e8a2d89fd16f241a693c5a56f3b78 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 23 23:54:33 2010 +0200 + + Clear status + titlebar when deleting last image in collection + + Fixes bug 632458. + + src/eog-statusbar.c | 4 ++++ + src/eog-window.c | 20 ++++++++++++++------ + 2 files changed, 18 insertions(+), 6 deletions(-) + +commit 29e86493d648f70ee51f54aa53f8915418263ef6 +Author: Laco Gubík <lacogubik@gmail.com> +Date: Mon Oct 25 21:06:28 2010 +0200 + + Updated Slovak translation + + po/sk.po | 1449 ++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 897 insertions(+), 552 deletions(-) + +commit ff1e76ae5227ed08f5cb4f2109434972f33b7941 +Author: Javier Sánchez <jsanchez@deskblue.com> +Date: Sat Oct 23 07:49:29 2010 +0200 + + Removed all references to gtk_widget_hide_all + + gtk_widget_hide_all was removed in the latest version of gtk+. + Fixes bug #632954. + + src/eog-properties-dialog.c | 16 ++++++++-------- + src/eog-thumb-nav.c | 16 ++++++++-------- + src/eog-window.c | 6 +++--- + 3 files changed, 19 insertions(+), 19 deletions(-) + +commit ea9e37e7dd01bf7f1b7b50472b250a41a758f63b +Author: Javier Sánchez <jsanchez@deskblue.com> +Date: Sat Oct 23 07:57:55 2010 +0200 + + Completely replaced references to GtkComboBoxText widget. + + Fixes bug #632608. + + src/eog-print-image-setup.c | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +commit 39509447bb071829f2df49ba3dee2fd9a4dbd16c +Author: Carles Ferrando <carles.ferrando@gmail.com> +Date: Sat Oct 23 01:04:20 2010 +0200 + + Updated Catalan (Valencian) translation + + po/ca@valencia.po | 518 +++++++++++++++++++++++++++++++----------------------- + 1 file changed, 295 insertions(+), 223 deletions(-) + +commit 5c2ac1c49f66731b9c78b9baa44fe38fef5fe480 +Author: Gheyret T.Kenji <gheyret@gmail.com> +Date: Thu Oct 21 18:25:46 2010 +0200 + + Added UG translation + + po/ug.po | 1950 +++++++++++++++++++++++++++++++++++++++++++++----------------- + 1 file changed, 1413 insertions(+), 537 deletions(-) + +commit d6cf404307d69c148a8b8f78ac0d59582882f4ff +Author: Matthias Clasen <mclasen@redhat.com> +Date: Wed Oct 20 18:21:50 2010 +0200 + + Handle combobox text API going away + + The combobox text convenience API is replaced by a GtkComboBoxText + widget in gtk-3. Fixes bug 632608. + + src/eog-print-image-setup.c | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +commit 608ef5240e87c4d0e182e7748698e2c298ec00c8 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 20 18:17:43 2010 +0200 + + Make print preview use the "draw"-signal instead of "expose-event" + + src/eog-print-preview.c | 18 +++++++----------- + 1 file changed, 7 insertions(+), 11 deletions(-) + +commit 7271873d66ba42edc1e635d56d1821ba997f5588 +Author: Aron Xu <aronxu@gnome.org> +Date: Wed Oct 20 16:54:38 2010 +0800 + + Update Simplified Chinese translation. + + po/zh_CN.po | 543 ++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 294 insertions(+), 249 deletions(-) + +commit 9e704e7ecbbfe603c38f90508a63411adaf86dc4 +Author: Jakob Kramer <jakob.kramer@gmx.de> +Date: Tue Oct 19 19:30:44 2010 +0200 + + [i18n] Updated German translation + + po/de.po | 351 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 189 insertions(+), 162 deletions(-) + +commit 02e02c72c660a9db79e791458dd4cae5ad766348 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 18 22:36:41 2010 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d31abc1ee49162c664a4b9d9a26b89e01ec20d2c +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 18 22:30:22 2010 +0200 + + Prepare for release 2.91.1 + + NEWS | 30 ++++++++++++++++++++++++++++++ + 1 file changed, 30 insertions(+) + +commit 91160984bed34014fcd02b075fa4b72442deec2e +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Oct 17 13:51:49 2010 +0200 + + [statusbar-date] Remove resize grip handling + + The parent window handles this now. + + plugins/statusbar-date/eog-statusbar-date-plugin.c | 2 -- + 1 file changed, 2 deletions(-) + +commit 05810eafb4781b3313f59e2e52724d6ea4ede118 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Oct 17 13:06:58 2010 +0200 + + Make "Best Fit" a toggle action + + This should make it clear from the toolbar when the image will be + rescaled with the window and when not. Fixes bug 616890. + + src/eog-window.c | 36 ++++++++++++++++++++++++++++++++---- + 1 file changed, 32 insertions(+), 4 deletions(-) + +commit 9ff7cefd9174267fa6c57bbc4b60133e09cb0931 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 11 20:50:21 2010 +0200 + + Make EogScrollView's zoom mode a public property + + src/eog-scroll-view.c | 85 ++++++++++++++++++++++++++++++++++++++------------- + src/eog-scroll-view.h | 8 ++++- + src/eog-window.c | 3 +- + 3 files changed, 73 insertions(+), 23 deletions(-) + +commit f866669251b6efa303725434e51e24c0bcddbf0d +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Sun Oct 17 11:55:45 2010 +0200 + + Added sl for Slovenian translation + + help/Makefile.am | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 33f06002d4c9042d29d80982682cbc54a6663d0d +Author: Andrej Žnidaršič <andrej.znidarsic@gmail.com> +Date: Sun Oct 17 11:54:53 2010 +0200 + + Updated Slovenian translation + + help/sl/sl.po | 995 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 995 insertions(+) + +commit 5bb5a0bbbd8a47215828f30d97474d63dc979be4 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 16 22:50:50 2010 +0200 + + Support transpose/transverse as lossless JPEG transformations + + Also implement a warning message if unsupported transformations + are used to easier discover such cases in the future. Fixes bug 632290. + + src/eog-image-jpeg.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +commit f2a9be530668155e2a6ab31213f230b104f4832b +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 16 22:41:56 2010 +0200 + + Fix calculation of reference matrices for transpose/transverse + + The flip matrices were applied as if the source matrix were an identity + matrix instead of properly multiplicating them. + + src/eog-transform.c | 16 ++++++++++------ + 1 file changed, 10 insertions(+), 6 deletions(-) + +commit 11f5bf78a6299b5625a8e1b5e40449d0815b018f +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sat Oct 16 13:36:25 2010 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 417 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 215 insertions(+), 202 deletions(-) + +commit b417c57d846bfa83045de8d74ed35e96ef345e22 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Oct 15 17:29:36 2010 +0200 + + Don't try to thumbnail named pipes in the file open dialog + + In fact this means all "special" files like sockets and device files. + This prevents lockups due to file I/O blocking here. Fixes bug 623271. + + src/eog-file-chooser.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +commit ae87b75f46608db9812ee5cfa0c58a0eddd67324 +Author: A S Alam <aalam@users.sf.net> +Date: Wed Oct 13 07:42:42 2010 +0530 + + update translation: Punjabi + + po/pa.po | 574 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 314 insertions(+), 260 deletions(-) + +commit 533e5669f7fcb10f8bcc10874c181c71a9b3af75 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Mon Oct 11 10:47:27 2010 +0200 + + Updated Galician translations + + po/gl.po | 571 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 308 insertions(+), 263 deletions(-) + +commit b21dd56b9437e53b7ba8abdd96942c1871edc02c +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 9 15:33:37 2010 +0200 + + Make sure EogScrollView's adjustment values are always correctly set + + Ensures one can only scroll as far as necessary. If one scrolled to far + the images's last line/column was used for padding. Fixes bug 631710. + + src/eog-scroll-view.c | 58 +++++++++++++++++++++------------------------------ + 1 file changed, 24 insertions(+), 34 deletions(-) + +commit 10f17139ed47ebc194ece30e6632ba441463de75 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Oct 9 20:56:46 2010 +0200 + + Remove resize grip handling + + Latest GTK+ can handle this automatically for any window. + Raise GTK+ dependency version to catch the required GTK changes. + + configure.ac | 2 +- + src/eog-statusbar.c | 12 ------------ + src/eog-statusbar.h | 3 --- + src/eog-window.c | 25 ------------------------- + 4 files changed, 1 insertion(+), 41 deletions(-) + +commit 91ea4ede99cf78a2663a145cefe5ba3f715c1e16 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Thu Oct 7 14:19:55 2010 +0200 + + Updated Spanish translation + + po/es.po | 353 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 173 insertions(+), 180 deletions(-) + +commit ec3c660b166b23d90140ebdefd02a969c3719d42 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Thu Oct 7 08:39:32 2010 +0200 + + Updated Hebrew translation. + + po/he.po | 556 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 301 insertions(+), 255 deletions(-) + +commit 349676e43252477219d07cad279861bd9484d94d +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Oct 6 21:18:49 2010 +0200 + + Check if an editor has been set before comparing it to other apps + + Fixes critical warnings if no editor application has been set. + + src/eog-window.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit b5e6b7d31181ab87f788921f751a6550bddb5bcf +Author: Ryan Lortie <desrt@desrt.ca> +Date: Sun Feb 14 20:48:13 2010 -0500 + + Bug 609958 - add "Edit Image" toolbar button + + Add a conditionally-enabled "Edit Image" toolbar button. The toolbar is + only enabled if a specific image editor is specified in GSettings. + + configure.ac | 1 + + data/org.gnome.eog.gschema.xml.in.in | 5 ++ + src/eog-config-keys.h | 1 + + src/eog-window.c | 121 +++++++++++++++++++++++++++++++++++ + 4 files changed, 128 insertions(+) + +commit 35ea437d25c94cbd7c0c61c7a4c3094a239048d8 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Sep 13 18:38:14 2010 +0300 + + Don't create thumbnails out of outdated image pixbufs + + Fixes bug #614634 - EOG prevents the Desktop thumbnails to be updated + + src/eog-thumbnail.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +commit 50390e87fe4f14f3a68ca93b3048127c15244750 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Sep 13 18:35:42 2010 +0300 + + Add eog_image_is_file_changed() + + doc/reference/eog-sections.txt | 1 + + src/eog-image.c | 8 ++++++++ + src/eog-image.h | 2 ++ + 3 files changed, 11 insertions(+) + +commit c1cc23e3c776c9b05b255c7127b4932d2d076b4e +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Sep 13 18:35:24 2010 +0300 + + Store the changed status of an image file + + src/eog-image-private.h | 1 + + src/eog-image.c | 7 ++++++- + 2 files changed, 7 insertions(+), 1 deletion(-) + +commit 0094e371c453d7f57bec7f502c86a99889df2f54 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 4 23:11:29 2010 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 5f1e407910accf4be69f256dd55d6d87af5d4afa +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 4 23:08:07 2010 +0200 + + Prepare for release 2.91.0 + + NEWS | 76 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 76 insertions(+) + +commit 07ec6f14d55cd990dd27661c2bf38c934d54d36f +Author: Simos Xenitellis <simos@gnome.org> +Date: Thu Sep 30 14:45:07 2010 +0300 + + l10n: Updated Greek translation for eog + + po/el.po | 559 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 330 insertions(+), 229 deletions(-) + +commit 8be6bfaa2f41e5ffd798f5c96e012ff286d0b31a +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Sep 28 16:15:49 2010 +0300 + + Remove call to gdk_window_clear() + + This doesn't exist anymore, and it's not needed, since the surface is + clean before ::draw is emitted. + + src/eog-scroll-view.c | 3 --- + 1 file changed, 3 deletions(-) + +commit e300daf3ad2743199cab0263d945e3bf732a05b3 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Sep 28 16:02:55 2010 +0300 + + Connect to the ::draw signal instead of the removed ::expose-event + + src/eog-scroll-view.c | 13 +++---------- + 1 file changed, 3 insertions(+), 10 deletions(-) + +commit c976adaa1322140ebb8d33d5be379ed47a45c4e5 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Sep 28 16:02:16 2010 +0300 + + Pass a cairo context to gtk_paint_focus() + + src/eog-print-preview.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit c798458f657ed73a4a82e3f9c78813200bb31899 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Sep 28 16:01:46 2010 +0300 + + Bump GTK+ requirement + + We need to fix eog for all the changes that are to land with 2.90.8 + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit eda89edd1a6be308896fc5bb40b41c77dfd5df2c +Author: Matthias Clasen <mclasen@redhat.com> +Date: Tue Sep 28 15:50:26 2010 +0300 + + Drop GtkObject use + + https://bugzilla.gnome.org/show_bug.cgi?id=630686 + + Signed-off-by: Claudio Saavedra <csaavedra@igalia.com> + + src/eog-sidebar.c | 8 +++----- + src/eog-thumb-view.c | 10 +++++----- + 2 files changed, 8 insertions(+), 10 deletions(-) + +commit 04cb8b2948d49dea2459e8bbca088011e46c3206 +Author: Gil Forcada <gforcada@gnome.org> +Date: Mon Sep 27 20:33:02 2010 +0200 + + Updated Catalan translation + + po/ca.po | 511 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 291 insertions(+), 220 deletions(-) + +commit 22a65acf2ed91886d7c00824409949bf745a0682 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Mon Sep 27 10:32:41 2010 +0200 + + Updated Basque language + + po/eu.po | 473 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 269 insertions(+), 204 deletions(-) + +commit a7d3085013d86dcfb75e95df64d1e39065646dee +Author: Ivaylo Valkov <ivaylo@e-valkov.org> +Date: Sun Sep 26 16:43:43 2010 +0300 + + Updated Bulgarian translation + + po/bg.po | 608 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 323 insertions(+), 285 deletions(-) + +commit 2e7c4b47cda1e31459e3eb12b571cd4d3ae27d03 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Thu Sep 23 13:31:43 2010 +0300 + + Updated Arabic translation + + po/ar.po | 263 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 139 insertions(+), 124 deletions(-) + +commit c6c8fa03240958e73105df603adc1af0ca6d16c2 +Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> +Date: Mon Sep 20 17:04:19 2010 +0900 + + Updated Japanese translation + + po/ja.po | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +commit 04623ee8ba2af676349f53e246c13a241d690a20 +Author: Priit Laes <plaes@plaes.org> +Date: Sun Sep 19 20:37:16 2010 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 38 +++++++++++++++++++------------------- + 1 file changed, 19 insertions(+), 19 deletions(-) + +commit 0034712463f772016dd405113e7051ca54618a80 +Author: Yuri Myasoedov <ymyasoedov@src.gnome.org> +Date: Sun Sep 19 21:02:24 2010 +0400 + + Updated Russian translation + + po/ru.po | 717 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 356 insertions(+), 361 deletions(-) + +commit 4018f3efbff0a43a2a54c57ce80d390e8b14bb3a +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Sun Sep 19 18:30:49 2010 +0200 + + Updated Dutch translation by Wouter Bolsterlee + + po/nl.po | 629 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 358 insertions(+), 271 deletions(-) + +commit 68413b42908b4c17b3f850bac71867e1ac3ce3a9 +Author: Ivar Smolin <okul@linux.ee> +Date: Sun Sep 19 11:56:12 2010 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 9 ++++----- + 1 file changed, 4 insertions(+), 5 deletions(-) + +commit 8f84b54e34d66a86624aabb5586f4cb69d6d333a +Author: Bruno Brouard <annoa.b@gmail.com> +Date: Sat Sep 18 20:34:05 2010 +0200 + + Updated French translation + + po/fr.po | 491 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 268 insertions(+), 223 deletions(-) + +commit abb3647201abe463aace3cc7252fbbf0f5f60854 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Fri Sep 17 19:45:26 2010 +0200 + + Updated Spanish translation + + po/es.po | 549 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 304 insertions(+), 245 deletions(-) + +commit 9d1b7483ae47e5db65c254342b5b8fb55f26c249 +Author: Gintautas Miliauskas <gintautas@miliauskas.lt> +Date: Thu Sep 16 22:50:13 2010 +0300 + + Updated Lithuanian translation (thanks Aurimas Cernius). + + po/lt.po | 677 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 385 insertions(+), 292 deletions(-) + +commit f0eb1a0db70b5cc1af83b257a62f0d7103c92fe7 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Thu Sep 16 17:57:54 2010 +0200 + + [l10n] Updated Italian translation + + po/it.po | 502 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 285 insertions(+), 217 deletions(-) + +commit da709e96e7536cbd7b1b22a24e40457e2edf65d8 +Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> +Date: Thu Sep 16 21:35:45 2010 +0900 + + Updated Japanese translation. + + po/ja.po | 537 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 302 insertions(+), 235 deletions(-) + +commit 22987f7594382effb97f98080ef0a47a31d32b0a +Author: Kenneth Nielsen <k.nielsen81@gmail.com> +Date: Wed Sep 15 20:30:36 2010 +0200 + + Updated Danish translation + + po/da.po | 251 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 133 insertions(+), 118 deletions(-) + +commit 4f8def2160c053d910c15f53ace97ab7431c4bee +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Sep 15 16:28:47 2010 +0300 + + Plug leaked glist in EogWindow + + src/eog-window.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 6aff895cc42d08aca91657ab7bb85a99c2ea1899 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Sep 15 16:28:04 2010 +0300 + + Minor optimization + + GList should always be prepended and reversed later. + + src/eog-window.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit 4746be007c48962e40154965dd41952d9278a230 +Author: Ivar Smolin <okul@linux.ee> +Date: Wed Sep 15 11:53:07 2010 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 25 +++++++++++++++++++------ + 1 file changed, 19 insertions(+), 6 deletions(-) + +commit 503792113ce4262919c4d886713e885d1ad7bd08 +Author: Baurzhan Muftakhidinov <baurthefirst@gmail.com> +Date: Wed Sep 15 13:55:25 2010 +0600 + + Initial translation to Kazakh + + po/LINGUAS | 1 + + po/kk.po | 1404 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1405 insertions(+) + +commit 2a77eca2bc44237f1fb2918ba57834209efa0717 +Author: Christian Kirbach <Christian.Kirbach@googlemail.com> +Date: Tue Sep 14 23:44:58 2010 +0200 + + [l10n] Updated German translation + + po/de.po | 267 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 141 insertions(+), 126 deletions(-) + +commit f53dcbb275a06bc224a9bdb26084b6d1e768931a +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Tue Sep 14 14:31:17 2010 +0200 + + Updated Hungarian translation + + po/hu.po | 257 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 136 insertions(+), 121 deletions(-) + +commit 7eb19f2bffe29ebcda5575e7927cb58b4bd35bac +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Sep 10 17:53:19 2010 +0300 + + Ask the user whether to reload an externally modified image + + Fixes bug 534348 - eog should suggest to reload a modified file + + src/eog-window.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 72 insertions(+) + +commit d4174ac084accda573e9e345c380dc3b0d63d170 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Sep 10 17:52:41 2010 +0300 + + Emit ::file-changed when a image in a a monitored directory changes + + src/eog-list-store.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +commit face399a1a1898b9fa6c82456ed85084a23c83f9 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Sep 10 17:51:37 2010 +0300 + + Add a EogImage::file-changed signal + + This is going to be useful to broadcast changes in the underlying file + + doc/reference/eog-sections.txt | 1 + + src/eog-image.c | 23 +++++++++++++++++++++++ + src/eog-image.h | 4 ++++ + 3 files changed, 28 insertions(+) + +commit 7429d93233f2c2af98f2dc091be49e170f252e79 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Sep 10 17:58:46 2010 +0300 + + Fix a typo in EogImage:next-frame signal definition + + src/eog-image.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit e090c281cddae35bf22a6093e0de6b123159f800 +Author: Kenneth Nielsen <k.nielsen81@gmail.com> +Date: Sun Sep 12 17:06:11 2010 +0200 + + Updated Danish translation + + po/da.po | 636 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 356 insertions(+), 280 deletions(-) + +commit ba89d0480214d4a6c8651299e534a923da5e0c3c +Author: Duarte Loreto <happyguy_pt@hotmail.com> +Date: Fri Sep 10 23:48:41 2010 +0100 + + Updated Portuguese translation + + po/pt.po | 660 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 367 insertions(+), 293 deletions(-) + +commit f6f67169a51cf304dafa641e50168686c9accdc0 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 10 23:01:49 2010 +0200 + + Remove has_separator attribute from GtkBuilder files + + Fixes warnings about unsupported properties due to recent + deprecations in GTK+. + + data/eog-image-properties-dialog.ui | 1 - + data/eog-multiple-save-as-dialog.ui | 1 - + data/eog-preferences-dialog.ui | 1 - + 3 files changed, 3 deletions(-) + +commit cbe0fc08f4a02f3d12b946db7d78995d05e4cfb9 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 10 22:49:34 2010 +0200 + + Set version to 2.91.0. + + Make it uneven to show it's a development version. + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c4f204aee4640b3997d3e30d67f6f292da935078 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 10 21:04:47 2010 +0200 + + Fix GDK_DISPLAY() usage. + + It has been removed in latest GTK+. + + cut-n-paste/totem-screensaver/totem-scrsaver.c | 51 ++++++++++++++++---------- + 1 file changed, 31 insertions(+), 20 deletions(-) + +commit 01593dc2f1ada3c07d7681f489fb0d2bf9562de7 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 10 20:49:26 2010 +0200 + + Make GtkDialog-usage compatible with GTK+-2.90.7 + + src/eog-close-confirmation-dialog.c | 1 - + src/eog-window.c | 2 -- + 2 files changed, 3 deletions(-) + +commit 29d46b3c3125c27544c888d03591571679dfd0a7 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Sep 10 20:45:47 2010 +0200 + + Update GDK keysym names to be compatible with GTK+-2.90.7 + + configure.ac | 2 +- + src/eog-print-preview.c | 8 ++++---- + src/eog-scroll-view.c | 24 ++++++++++++------------ + src/eog-sidebar.c | 8 ++++---- + src/eog-window.c | 30 +++++++++++++++--------------- + 5 files changed, 36 insertions(+), 36 deletions(-) + +commit 3ff454bb5b6ab74d7a046dd098e02ad5215489f9 +Author: Petr Kovar <pknbe@volny.cz> +Date: Fri Sep 10 20:20:02 2010 +0200 + + Update Czech translation by Adrian Gunis + + po/cs.po | 248 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 125 insertions(+), 123 deletions(-) + +commit 5f03aaec0715abb9048b43291caa11c40c945a87 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Sep 9 16:00:49 2010 +0300 + + Don't show the side pane on show_all() + + This was causing the gconf key to be toggled on always on eog startup, + making the side pane visible regardless of the previously set + preference. + + Fixes bug #613056 - Side pane always shown at startup when plug-in is activated + + src/eog-window.c | 4 ++++ + 1 file changed, 4 insertions(+) + +commit 0879551dabc58de31cd37ee09bb7a0a6da369e5d +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Sep 9 02:21:12 2010 +0300 + + Show original filename instead of "eog-wallpaper.png" in the info bar + + When copying over non-persistent files, the info bar was showing + "eog-wallpaper.png" as the name of the recently copied image to the + user. Since this is an internal detail, show the original filename + instead. + + src/eog-window.c | 27 +++++++++++++++------------ + 1 file changed, 15 insertions(+), 12 deletions(-) + +commit 1598fb646b4e1218df065ed0937926d761e3a8be +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Sep 9 02:09:40 2010 +0300 + + Plug a couple of leaks + + src/eog-window.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit 59343f86c198a6e25fcdb372d8a333b40a0e0e8e +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Sep 9 01:37:49 2010 +0300 + + Copy also wallpapers in unmountable media + + Fixes bug #625384 - Background setting doesn't work as expected + + src/eog-window.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit 05a00504e896e00592f8f49525141474ae1755c5 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Sep 9 01:36:29 2010 +0300 + + Add eog_util_file_is_persistent() + + This method checks whether a file is native and in a non-unmountable + location. + + doc/reference/eog-sections.txt | 1 + + src/eog-util.c | 28 ++++++++++++++++++++++++++++ + src/eog-util.h | 3 +++ + 3 files changed, 32 insertions(+) + +commit f9ba7f06d73fcd901691e5fa375d87a3a9981cd6 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Sep 3 16:42:31 2010 +0300 + + Simplify create_surface_from_pixbuf() + + src/eog-scroll-view.c | 6 +----- + 1 file changed, 1 insertion(+), 5 deletions(-) + +commit 2be68aaee33e3e6732e512a22d9ee5b681e95cc5 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Aug 25 12:32:31 2010 +0300 + + Improve the rendering of scaled images + + Not using CAIRO_CONTENT_ALPHA added a black border to images, when + painted scaled. Also, a extend mode of CAIRO_EXTEND_PAD, clipped to + the image rectangle, prevents the image borders to be drawn blending + out with the background. + + https://bugzilla.gnome.org/show_bug.cgi?id=626795 + + src/eog-scroll-view.c | 12 +++++------- + 1 file changed, 5 insertions(+), 7 deletions(-) + +commit 9e6f9ee6ea2c0ca4338445a55ff3c6175ca6f623 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Aug 18 02:02:53 2010 +0300 + + Honour the antialiasing-in and antialiasing-out EogScrollView properties + + https://bugzilla.gnome.org/show_bug.cgi?id=626795 + + src/eog-scroll-view.c | 3 +++ + 1 file changed, 3 insertions(+) + +commit 793ede27dd4cd0aa73d5e84cc478641e25424f54 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Wed Aug 18 02:02:01 2010 +0300 + + Replace GdkInterpType with cairo_filter_t in EogScrollView + + https://bugzilla.gnome.org/show_bug.cgi?id=626795 + + src/eog-scroll-view.c | 44 ++++++++++++++++++++++---------------------- + 1 file changed, 22 insertions(+), 22 deletions(-) + +commit bb9d00011e07e9ad68b5e4968a2c1e68596c5684 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Aug 17 18:27:52 2010 +0300 + + Remove unneeded code + + Actually, #ifdef it out and comment it. It's nice code anyway. + + https://bugzilla.gnome.org/show_bug.cgi?id=626795 + + src/eog-scroll-view.c | 19 ++++++++++++++----- + 1 file changed, 14 insertions(+), 5 deletions(-) + +commit 8654e7de549d8edf34c14f3f0a655d8773b1e433 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Aug 17 16:05:46 2010 +0300 + + Fix the SVG rendering + + Take the transformation bits from the existing code and use them to + add proper svg rendering support. + + https://bugzilla.gnome.org/show_bug.cgi?id=626795 + + src/eog-scroll-view.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++--- + 1 file changed, 51 insertions(+), 3 deletions(-) + +commit f0410a55778e719da8f2b62f0e5060bb128f028e +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Aug 17 00:03:38 2010 +0300 + + Enable double-buffer in EogScrollView + + Now that we rely on cairo, there is no reason to try to be über-smart. + Enabling double-buffer fixes the flickering and the slowness with huge + images. + + https://bugzilla.gnome.org/show_bug.cgi?id=626795 + + src/eog-scroll-view.c | 2 -- + 1 file changed, 2 deletions(-) + +commit 919929eea1d63380f773f9c0a339a32149e592ba +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Aug 16 23:14:39 2010 +0300 + + Fully rely on cairo to render the image in EogScrollView + + This is an initial patch to showcase how EogScrollView performs when + we discard all the internal optimizations and rely on cairo to render + the image. In general, performance is quite good, with a few caveats: + + - Rendering svg is broken (librsvg is not building because of the + changes in API in GTK+ 3) + - There is flickering in the rendering of the background for images + with an alpha channel + - Images bigger than 4096×4096 seems to be quite slow (at least with + an nvidia card) + + https://bugzilla.gnome.org/show_bug.cgi?id=626795 + + src/eog-scroll-view.c | 106 ++++++++++++++++++++++++++++++++++++++++++++------ + 1 file changed, 94 insertions(+), 12 deletions(-) + +commit 648302091b5517b5da96c4277fbee8f13c125938 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Aug 16 17:23:50 2010 +0300 + + Use gdk_window_create_similar_surface() for EogScrollView + + https://bugzilla.gnome.org/show_bug.cgi?id=626795 + + src/eog-scroll-view.c | 20 ++++++++++++-------- + 1 file changed, 12 insertions(+), 8 deletions(-) + +commit 889f275e38d0a7dcf062f5c63b8efaebaa1ca14f +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Aug 13 14:23:29 2010 +0300 + + Store a cairo_surface_t in EogScrollView for the GdkPixbuf to be rendered + + Using this later during the rendering should improve performance. + + https://bugzilla.gnome.org/show_bug.cgi?id=626795 + + src/eog-scroll-view.c | 34 ++++++++++++++++++++++++++++++++++ + 1 file changed, 34 insertions(+) + +commit 4f432e981a956cd157ae3f190b9c7850a6f180d9 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Fri Aug 13 00:27:50 2010 +0300 + + Factor out the code to store a pixbuf in EogScrollView + + https://bugzilla.gnome.org/show_bug.cgi?id=626795 + + src/eog-scroll-view.c | 28 +++++++++++++++++++--------- + 1 file changed, 19 insertions(+), 9 deletions(-) + +commit 8eb706d628289b12a8c8ec66102f7c4051a9d2fb +Author: Dean Lee <xslidian@lidian.info> +Date: Mon Sep 6 13:17:50 2010 +0800 + + Update Simplified Chinese translation. + + po/zh_CN.po | 518 +++++++++++++++++++++++++++++------------------------------- + 1 file changed, 252 insertions(+), 266 deletions(-) + +commit 421c6b058f68d98127738d4d41ddb629412120a6 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Sun Sep 5 16:50:13 2010 +0200 + + Updated Arabic translation + + po/ar.po | 55 ++++++++++++++++++++++++++----------------------------- + 1 file changed, 26 insertions(+), 29 deletions(-) + +commit 70fc6554484985eae1088633e03c8bd5796a0fd2 +Author: Claude Paroz <claude@2xlibre.net> +Date: Fri Sep 3 23:58:18 2010 +0200 + + Updated French translation + + po/fr.po | 418 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 200 insertions(+), 218 deletions(-) + +commit babc471a19fc18bb9a854c46e56b6ad88c86613a +Author: drtv <vasudeven@git.gnome.org> +Date: Fri Sep 3 16:16:39 2010 +0530 + + Updated Tamil translation + + po/ta.po | 437 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 224 insertions(+), 213 deletions(-) + +commit d67c7b883a67df15b47190c5774c0179bd6e54e9 +Author: Christian.Kirbach <Christian.Kirbach@googlemail.com> +Date: Thu Sep 2 09:45:27 2010 +0200 + + [l10n] Updated German translation + + po/de.po | 475 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 243 insertions(+), 232 deletions(-) + +commit 5765c89d55e1389bc239910c4ca739f392945fa4 +Author: Michael Kotsarinis <mk73628@gmail.com> +Date: Tue Aug 31 22:52:44 2010 +0300 + + l10n: Updated Greek translation for eog + + po/el.po | 726 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 335 insertions(+), 391 deletions(-) + +commit be90940a63721b94a127e230bf6de9ea4f1379b5 +Author: Andika Triwidada <andika@gmail.com> +Date: Tue Aug 31 22:25:07 2010 +0700 + + Updated Indonesian translation + + po/id.po | 413 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 221 insertions(+), 192 deletions(-) + +commit d4b03c3a1d50f6111edb3823a2477085f71d8625 +Author: Dirgita <dirgitadevina@yahoo.co.id> +Date: Tue Aug 31 15:58:35 2010 +0700 + + Updated Indonesian translation + + po/id.po | 317 ++++++++++++++++++++++++++++----------------------------------- + 1 file changed, 141 insertions(+), 176 deletions(-) + +commit 2370d59efc7d32855cbda32068a1f0a591ce6d05 +Author: Милош Поповић <gpopac@gmail.com> +Date: Tue Aug 31 01:59:58 2010 +0200 + + Updated Serbian translation + + po/sr.po | 109 +++++++++++++++++++++++++++++++++++---------------------- + po/sr@latin.po | 109 +++++++++++++++++++++++++++++++++++---------------------- + 2 files changed, 134 insertions(+), 84 deletions(-) + +commit 4435a75616e2e82186ef731c9ae6cbc76e1314b6 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Sun Aug 29 13:19:10 2010 +0200 + + Updated Hungarian translation + + po/hu.po | 65 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 33 insertions(+), 32 deletions(-) + +commit e8eb34bb9877f0db525a1dbc1be7193ff909ab1e +Author: Ivar Smolin <okul@linux.ee> +Date: Sun Aug 29 13:18:55 2010 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 50 +++++++++++++++++++++++++------------------------- + 1 file changed, 25 insertions(+), 25 deletions(-) + +commit 625106acbeb4c7b185f17f8a59e21b658a8627d7 +Author: Philip Withnall <philip@tecnocode.co.uk> +Date: Fri Aug 27 18:21:16 2010 +0100 + + Bug 628148 — Miscellaneous string fixes + + data/org.gnome.eog.gschema.xml.in.in | 14 +++++++------- + src/eog-window.c | 2 +- + 2 files changed, 8 insertions(+), 8 deletions(-) + +commit 6c8d6c0e5b61b8ed85d0b0717a098e43ebb7d2a4 +Author: Philip Withnall <philip@tecnocode.co.uk> +Date: Fri Aug 27 18:15:17 2010 +0100 + + Update British English translation + + po/en_GB.po | 613 +++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 338 insertions(+), 275 deletions(-) + +commit 9cdfbf6875bd5e8a92fa4a69eb9a0f7192f71159 +Author: Ivar Smolin <okul@linux.ee> +Date: Fri Aug 27 17:15:21 2010 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 102 +++++++++++++++++++++------------------------------------------ + 1 file changed, 34 insertions(+), 68 deletions(-) + +commit 5fa16fe1f8e29b75af6fc1e352922c70ffc6f1bc +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Thu Aug 26 03:32:14 2010 +0200 + + Updated Hungarian translation + + po/hu.po | 443 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 248 insertions(+), 195 deletions(-) + +commit a269705a2456f1910c9a1530694c49db28a93679 +Author: Petr Kovar <pknbe@volny.cz> +Date: Mon Aug 23 23:06:36 2010 +0200 + + Update Czech translation by Adrian Gunis + + po/cs.po | 477 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 271 insertions(+), 206 deletions(-) + +commit eb267a2ac60d17c6982f94b4b75e751b5f6640ed +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Thu Aug 19 18:55:52 2010 +0200 + + Updated Arabic translation + + po/ar.po | 595 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 334 insertions(+), 261 deletions(-) + +commit ecef65ddba6aa294cdb03ded736b77084149d102 +Author: Милош Поповић <gpopac@gmail.com> +Date: Mon Aug 16 14:22:43 2010 +0200 + + Updated Serbian translation + + po/sr.po | 516 +++++++++++++++++++++++++++++---------------------------- + po/sr@latin.po | 516 +++++++++++++++++++++++++++++---------------------------- + 2 files changed, 522 insertions(+), 510 deletions(-) + +commit c858ff5d9dbd467e5e283b694c04f07fdfaabf46 +Author: Aron Xu <aronxu@gnome.org> +Date: Sat Aug 14 21:40:01 2010 +0800 + + Sync zh_CN.po from gnome-2-32. + + po/zh_CN.po | 585 +++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 323 insertions(+), 262 deletions(-) + +commit 8a9237692a572ef230ffc25593b3d673b15de9f1 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Aug 12 22:08:00 2010 +0300 + + Use cairo recommended rowstride for the surface in EogPrintPreview + + src/eog-print-preview.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +commit f8704ad41fc4f75aaf489c55e121103b77861ccb +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Aug 12 02:13:38 2010 +0300 + + Use the new license-type property in GtkAboutDialog + + Bump the GTK+ version requirement for this. + + configure.ac | 2 +- + src/eog-window.c | 23 +---------------------- + 2 files changed, 2 insertions(+), 23 deletions(-) + +commit f9ebc7b72f1c53dce3f472771767130eb5a52bcc +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Aug 12 02:12:32 2010 +0300 + + Update the copyright years in the about dialog + + src/eog-window.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 887e6c96159bb14c03106d45eb964a10734db90b +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Aug 12 01:58:24 2010 +0300 + + Use GDK_BLANK_CURSOR for the hidden cursor + + No need to use a GdkBitmap for this. + + src/eog-scroll-view.c | 14 +------------- + 1 file changed, 1 insertion(+), 13 deletions(-) + +commit 165f3032de5384ab4073b0433b70a9aa7411b14d +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Aug 11 19:05:54 2010 +0200 + + Stop having EogWindow react on focus-in event in fullscreen + + There appears to be no actual use case for doing this. + Fixes the toolbar appearing after regaining focus (e.g. after deleting + an image or ALT+TABing). Fixes bug 626569. + + src/eog-window.c | 19 ------------------- + 1 file changed, 19 deletions(-) + +commit e25919b9a67e60dad1650e1377a30242e0d7a5fb +Author: Andika Triwidada <andika@gmail.com> +Date: Wed Aug 11 21:15:55 2010 +0700 + + Updated Indonesian translation + + po/id.po | 210 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 111 insertions(+), 99 deletions(-) + +commit 3c1e6e5ec856bc4f76c82e52ffc9594cea02f164 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Mon Aug 9 00:43:18 2010 +0300 + + Fix typo in docs + + src/eog-window.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 399d49129aa794d588968f2d4f26477a6069524b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 8 17:19:57 2010 +0200 + + Make image area background black by default + + Said to improve focussing on the image and avoiding interference from + the UI. Fixes bug 616450. + + data/org.gnome.eog.gschema.xml.in.in | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ed86bde5420559b0624bfaff5c881e934b3d96a3 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Aug 8 17:16:22 2010 +0200 + + Make button text descriptive when setting image as wallpaper + + Fixes bug 625352. + + src/eog-window.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +commit b0f0746c7f2987dc587301ceef7d414da7ab66d0 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Aug 7 00:21:26 2010 +0200 + + Correct EogScrollView's background color preference order + + The override-color needs preference over the other colors. + The background color can't be forced to black for fullscreen otherwise. + + src/eog-scroll-view.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit 804eb812579a1ffab82554a81892df237f430b2c +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Thu Aug 5 01:24:57 2010 +0300 + + Bump version to 2.90.0 + + Now that 2.31.x continues in the gnome-2-32 branch + + configure.ac | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit bf3ddd1bc432fec076e9629e11d3a0085532783c +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Wed Aug 4 20:09:08 2010 +0200 + + Updated Slovenian translation + + po/sl.po | 496 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 268 insertions(+), 228 deletions(-) + +commit 60cc058195e361be27f21b936f6e6e3fde1d7e02 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Wed Aug 4 14:09:10 2010 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 332 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 168 insertions(+), 164 deletions(-) + +commit bfb867b46e27c3eee171a1c94c10f23e5ea2a368 +Author: Dirgita <dirgitadevina@yahoo.co.id> +Date: Wed Aug 4 10:50:18 2010 +0700 + + Updated Indonesian translation + + po/id.po | 1808 +++++++++++++++++++++++++++++++++++++++++--------------------- + 1 file changed, 1186 insertions(+), 622 deletions(-) + +commit 40f3da287b0d9f4b95f2a1a4370e891affb7642a +Author: A S Alam <aalam@users.sf.net> +Date: Wed Aug 4 14:25:51 2010 +0530 + + update Punjabi Translation by A S Alam + + po/pa.po | 638 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 330 insertions(+), 308 deletions(-) + +commit eb0c094e950fce2084165140deac8f1c64e8c46f +Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> +Date: Tue Aug 3 19:49:50 2010 +0300 + + Updated Romanian translation + + po/ro.po | 620 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 337 insertions(+), 283 deletions(-) + +commit 47d1020caa0c4776d13e88215c75244f224ab80f +Author: Ivar Smolin <okul@linux.ee> +Date: Sat Jul 31 09:52:20 2010 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 7 +++++-- + 1 file changed, 5 insertions(+), 2 deletions(-) + +commit 7c69b182662f43636b1027fa395f9372593e39bb +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 28 23:04:38 2010 +0200 + + Make the image-gallery-position GSetting an enum + + data/org.gnome.eog.gschema.xml.in.in | 4 ++-- + src/eog-window.c | 10 ++++++---- + 2 files changed, 8 insertions(+), 6 deletions(-) + +commit e8f2f6ecdd99dc5dce35a044e84738fe73f937e0 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 28 22:54:28 2010 +0200 + + Have GSettings use enum for transparency style + + Removes quite a bit of code. Makes it unavailable for + gsettings-data-convert though. + + data/eog.convert | 1 - + data/org.gnome.eog.gschema.xml.in.in | 4 +-- + src/eog-preferences-dialog.c | 59 ++++++++++++++---------------------- + src/eog-scroll-view.c | 35 ++------------------- + 4 files changed, 27 insertions(+), 72 deletions(-) + +commit 28a38946c4871ee00305a4a6c0cf9e48c36e530b +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 28 22:53:43 2010 +0200 + + Use GSettings enum support + + data/Makefile.am | 3 +++ + 1 file changed, 3 insertions(+) + +commit 736a634a376c650810da3d79651c3b1319568663 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 28 22:14:43 2010 +0200 + + Remove old GConf parameter from distcheck params + + Makefile.am | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 310b9fa32ec018c891fc432de1b80fb5185dd8f0 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 28 22:11:52 2010 +0200 + + Remove GConf schemas from translations + + po/POTFILES.in | 1 - + 1 file changed, 1 deletion(-) + +commit e81ac67ce4bd7dc1746022a5b9df9c3758eb35c9 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 28 22:01:05 2010 +0200 + + Don't hardcode GConf as GSettings backend + + This is not really needed anymore and we also want to use features + of dconf soon. + + src/main.c | 2 -- + 1 file changed, 2 deletions(-) + +commit e98adab7da3209c9f193d0df019d5516f82ed967 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 28 22:00:05 2010 +0200 + + Remove unneeded GConf schemas + + They wont't be used anymore. + + configure.ac | 13 +-- + data/Makefile.am | 17 ---- + data/eog.schemas.in | 274 ---------------------------------------------------- + 3 files changed, 3 insertions(+), 301 deletions(-) + +commit 1edaea8623e58c7b37d4e2da11c8c905bfe51ca9 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 28 21:36:03 2010 +0200 + + Add conversion file for gsettings-data-convert + + Uses key names from the last stable series for older keys. So if you + changed your settings since commit ea47 or eog-2.31.4 your settings will + not be ported over. + + data/Makefile.am | 4 ++++ + data/eog.convert | 31 +++++++++++++++++++++++++++++++ + 2 files changed, 35 insertions(+) + +commit 7a85a0a1520b9f21fa44c8e8bd7253624770ca14 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Wed Jul 28 12:28:37 2010 +0300 + + Updated Hebrew translation. + + po/he.po | 294 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 149 insertions(+), 145 deletions(-) + +commit 0ca29e6bde34e23882fe18df4672817573157659 +Author: Mario Blättermann <mariobl@gnome.org> +Date: Tue Jul 27 23:13:34 2010 +0200 + + [i18n] Updated German translation + + po/de.po | 294 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 149 insertions(+), 145 deletions(-) + +commit 2873692edb6021c0aed6e193e12d06d13814fab3 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Tue Jul 27 17:52:08 2010 +0200 + + Updated Galician translations + + po/gl.po | 296 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 150 insertions(+), 146 deletions(-) + +commit a43eabdb5b4a771710a9a87779366070256f9176 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Mon Jul 26 20:59:35 2010 +0200 + + Updated Spanish translation + + po/es.po | 297 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 150 insertions(+), 147 deletions(-) + +commit 764758f77cbdcd65a1e9b66d502f975aa41ac782 +Author: Eleanor Chen <chenyueg@gmail.com> +Date: Mon Jul 26 23:01:06 2010 +0800 + + Update Simplified Chinese translations. + + po/zh_CN.po | 318 ++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 161 insertions(+), 157 deletions(-) + +commit 20d1a4a24ea4d1ae25cec467ee7be364a8ab82cb +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 26 12:39:58 2010 +0200 + + Allow disabling the save-on-close confirmation dialog + + Activating this option reverts eog to the behaviour of before + the dialog was introduced and changes will simply be discarded. + GSettings option only at the moment. Fixes bug #625226. + + data/org.gnome.eog.gschema.xml.in.in | 4 ++++ + src/eog-config-keys.h | 1 + + src/eog-window.c | 7 ++++++- + 3 files changed, 11 insertions(+), 1 deletion(-) + +commit d670f6e23a6d6a640f830c4a1bebaf928a983f23 +Author: drtv <vasudeven@git.gnome.org> +Date: Sun Jul 25 15:06:35 2010 +0530 + + Updated Tamil translation + + po/ta.po | 523 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 288 insertions(+), 235 deletions(-) + +commit 8c0e09a2433199d96b784fd5d2aed3508eb7f3b3 +Author: Xandru Armesto <xandru@softastur.org> +Date: Fri Jul 23 18:19:41 2010 +0200 + + Updated asturian translation + + po/ast.po | 1188 ++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 694 insertions(+), 494 deletions(-) + +commit af3c9a45dcbf2adccdbcd3d9816fca65a2e0263c +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jul 22 19:40:19 2010 +0200 + + Don't try to set the scrollview's parent's shadow-type property + + With commit e41b97bb the parent switched from a GtkFrame to a GtkHPaned + which doesn't have that property. + + src/eog-window.c | 8 -------- + 1 file changed, 8 deletions(-) + +commit 80674c0f4ea6c23afc7872db8365f072046187e4 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jul 22 19:38:00 2010 +0200 + + Remove now unnecessary GTK_CHECK_VERSION switches + + We use GTK+-3 and and would always pass each of these checks now. + + src/eog-window.c | 28 ---------------------------- + 1 file changed, 28 deletions(-) + +commit 1b66c6acb2c0ca775d294e72ef542f7a91538ba1 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 21 22:48:04 2010 +0200 + + Disable Python plugins since they don't work with GTK+-3 yet + + Porting to libpeas is likely a better approach than waiting for + PyGTK-3 as introspection will then hopefully relieve us from + hand-maintaining the Python API. + + configure.ac | 3 +++ + 1 file changed, 3 insertions(+) + +commit e580844febda5f1cbffabc8412e7889250cb827c +Author: Florian Müllner <fmuellner@gnome.org> +Date: Tue Jul 13 07:51:38 2010 +0200 + + Request a dark theme variant + + GTK+-3.0 introduces the possibility for applications to request + dark theme variants, aimed mainly at display centric applications + like movie players or viewers. + Eog obviously fits the bill, so it should follow Totem's lead ... + + https://bugzilla.gnome.org/show_bug.cgi?id=624262 + + src/main.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +commit d166ba737cf86d5e17d896c44ef42e0863616b0c +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 21 22:31:57 2010 +0200 + + Update eog.pc for GTK+-3 + + Depend on the correct GTK version and remove the unneeded GConf + dependency as plugins needing it should depend in it themselves. + + data/eog.pc.in | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 18ae8aafc996693998cd093ce71ed9ccccd1b884 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jul 21 22:24:26 2010 +0200 + + Adapt to recent GTK+-3 API changes in GtkNotebook + + Once version 2.90.6 is out the GTK_CHECK_VERSION switch can go out + and eog instead depend on that version in configure. + + src/eog-properties-dialog.c | 4 ++++ + 1 file changed, 4 insertions(+) + +commit 82785ea392f4d5eea0c0048cc16ed3386d28567e +Author: Florian Müllner <fmuellner@gnome.org> +Date: Tue Jul 13 07:51:32 2010 +0200 + + Compile against GTK+-3.0 + + Replace the removed GdkRegion API with the corresponding + cairo_region_t API and switch the build to GTK+-3.0. + + https://bugzilla.gnome.org/show_bug.cgi?id=624261 + + configure.ac | 12 ++++++------ + src/eog-scroll-view.c | 9 ++++----- + 2 files changed, 10 insertions(+), 11 deletions(-) + +commit 8dddacf02b46d83824c56d0a7f51dde2056eebb2 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 19 21:44:32 2010 +0200 + + Add gtk-doc annotations to the new properties + + src/eog-scroll-view.c | 13 ++++++++++++- + 1 file changed, 12 insertions(+), 1 deletion(-) + +commit bfef239942645fff4a5efe71d801ccb92a185cf7 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 19 21:38:02 2010 +0200 + + Set zoomed out antialiasing using a GSettings binding + + Moved to EogScrollView from EogWindow. + + src/eog-scroll-view.c | 18 ++++++++++++++++++ + src/eog-window.c | 31 ------------------------------- + 2 files changed, 18 insertions(+), 31 deletions(-) + +commit 15917972d9a60fc185b1cc9a7b4e304952c49d2d +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 19 21:32:04 2010 +0200 + + Set zoomed in antialiasing using a GSettings binding + + Again less work for EogWindow. + + src/eog-scroll-view.c | 18 ++++++++++++++++++ + src/eog-window.c | 29 ----------------------------- + 2 files changed, 18 insertions(+), 29 deletions(-) + +commit e7243a9ddad0f31f8759aadbd92ad551781b8480 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 19 21:10:40 2010 +0200 + + Handle EogScrollView's instance initialization in the right function + + Moves most of the other stuff done in eog_scroll_view_new + over to eog_scroll_view_init. + + src/eog-scroll-view.c | 152 +++++++++++++++++++++++++++----------------------- + 1 file changed, 81 insertions(+), 71 deletions(-) + +commit a3042084fab9da4ed2c5418716044368eda135ef +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 18 23:53:03 2010 +0200 + + Mark startup-flags property as GFlags which it actually is. + + Instead of using some strange guchar magic. + + src/eog-window.c | 11 ++++++----- + 1 file changed, 6 insertions(+), 5 deletions(-) + +commit d974945341b974d602a9f42565fdc47a61c9eda7 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 18 23:45:11 2010 +0200 + + Don't assert when accessing unknown EogWindow properties + + Use G_OBJECT_WARN_INVALID_PROPERTY_ID to emit a warning instead. + + src/eog-window.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 0c327b7ec802a07f53da04f5dc484e646548b552 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 18 23:41:55 2010 +0200 + + Determine gallery position and size using a GSettings binding + + Prepare everything for the use of GSettings' enum support for this. + + src/eog-window.c | 94 ++++++++++++++++++++++++++++++++++---------------------- + src/eog-window.h | 7 +++++ + 2 files changed, 65 insertions(+), 36 deletions(-) + +commit f4726d4facf7a2ebb616ba46ec20f12f1084cdde +Author: Mario Blättermann <mariobl@gnome.org> +Date: Sun Jul 18 20:44:47 2010 +0200 + + [i18n] Updated German translation + + po/de.po | 256 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 119 insertions(+), 137 deletions(-) + +commit ec93e7f2c26a09a69dbc93241a50badccb0f6b21 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 18 19:52:40 2010 +0200 + + Add gtk-doc annotations to the new properties in EogScrollView + + src/eog-scroll-view.c | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +commit acdafc3563c5c88d3c2d2a25e4602d774dad92fa +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 18 19:46:06 2010 +0200 + + Set transparency style using GSettings + + Another callback less from EogWindow. + This will be migrated to use GSetting's enum support soon. + + src/eog-scroll-view.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ + src/eog-window.c | 42 ------------------------------------------ + 2 files changed, 49 insertions(+), 42 deletions(-) + +commit a7d7b35fc1eb92e17901ec9e9054db0f35f2ad80 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 18 19:25:59 2010 +0200 + + Reflect transparency color API changes in Python bindings + + bindings/python/eog.defs | 10 +++++++++- + 1 file changed, 9 insertions(+), 1 deletion(-) + +commit 2a4e4c30e4a41a1f4b7b452243a56851cdebe442 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jul 18 19:22:06 2010 +0200 + + Set transparency fill color using GSettings + + Saves some callbacks from EogWindow. + + src/eog-scroll-view.c | 69 ++++++++++++++++++++++++++++++++++++++------------- + src/eog-scroll-view.h | 3 ++- + src/eog-window.c | 58 +++---------------------------------------- + 3 files changed, 58 insertions(+), 72 deletions(-) + +commit c10376c1f39dbaa43ede116831861adf72e19645 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sun Jul 18 18:27:05 2010 +0200 + + Fixed headers in galician translation file + + po/gl.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit da215f780c5885d24e51c01b7da48ede713e97b0 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sun Jul 18 18:25:31 2010 +0200 + + Fixed headers in galician translation file + + po/gl.po | 28 +++++++++++++++++----------- + 1 file changed, 17 insertions(+), 11 deletions(-) + +commit e41b97bbb5dc56cb49cbda638081f4312dd39df4 +Author: Florian Müllner <fmuellner@gnome.org> +Date: Tue Jul 13 07:51:09 2010 +0200 + + Remove frame around image view + + Quoting Hylke Bons: + "[...] it doesn't have a purpose and only causes visual clutter." + + https://bugzilla.gnome.org/show_bug.cgi?id=614807 + + src/eog-window.c | 9 +-------- + 1 file changed, 1 insertion(+), 8 deletions(-) + +commit 47fd09997d07d968bab511cd5b84900fbc923ea5 +Author: Sense Hofstede <qense@ubuntu.com> +Date: Sun Jul 18 02:13:40 2010 +0200 + + Updated Frisian translation and added it to the LINGUAS file + + po/LINGUAS | 1 + + po/fy.po | 1430 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1431 insertions(+) + +commit ee24db099553b7b1e1b92f11ed48c03f53f91269 +Author: Claude Paroz <claude@2xlibre.net> +Date: Sat Jul 17 15:30:18 2010 +0200 + + Updated French translation + + Contributed by Laurent Coudeur and Claude Paroz + + po/fr.po | 523 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 281 insertions(+), 242 deletions(-) + +commit 2871e19740c29f2b26b8e6c6413d237417cfcada +Author: Aron Xu <aronxu@gnome.org> +Date: Wed Jul 14 20:38:24 2010 +0800 + + Update Simplified Chinese help figures. + + help/zh_CN/figures/eog_start_window.png | Bin 13260 -> 20708 bytes + help/zh_CN/figures/eog_toolbar_editor_window.png | Bin 0 -> 37628 bytes + 2 files changed, 0 insertions(+), 0 deletions(-) + +commit bcc9545c697caceef9600823cd3da913ee662ab1 +Author: 朱涛 <bill_zt@sina.com> +Date: Wed Jul 14 20:38:05 2010 +0800 + + Update Simplified Chinese help translation. + + help/zh_CN/zh_CN.po | 2154 ++++++++++++++++++++++++++++++++++++++------------- + 1 file changed, 1617 insertions(+), 537 deletions(-) + +commit 2de563a9e73a8fe9f93735d8af74a3a9f7cbfc2c +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Wed Jul 14 19:50:10 2010 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 506 +++++++++++++++++++++++++++++++---------------------------- + po/zh_TW.po | 512 ++++++++++++++++++++++++++++++++---------------------------- + 2 files changed, 545 insertions(+), 473 deletions(-) + +commit 2d9d10ea7f89d5092c4b8901ea31ad00337157bf +Author: Eleanor Chen <chenyueg@gmail.com> +Date: Wed Jul 14 11:27:56 2010 +0800 + + Update Simplified Chinese translations. + + po/zh_CN.po | 720 +++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 371 insertions(+), 349 deletions(-) + +commit 6ef8f1fdd381ba79cad3ade0218aa78adbab861b +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Tue Jul 13 03:36:33 2010 +0300 + + Updated Hebrew translation. + + po/he.po | 224 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 116 insertions(+), 108 deletions(-) + +commit 1661d1a28020ae8ea02d3f817261b2edbb0bc45d +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sun Jul 11 16:26:57 2010 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 233 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 121 insertions(+), 112 deletions(-) + +commit cd55b85e3371e071ca7209e7f88c295cdb641b91 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Wed Jul 7 18:01:11 2010 +0200 + + Updated Galician translations + + po/gl.po | 234 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 121 insertions(+), 113 deletions(-) + +commit 5874f54949ec72a5ed28b61feb5c3008d1532663 +Author: Ivar Smolin <okul@linux.ee> +Date: Wed Jul 7 17:13:34 2010 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +commit cf491e411ecacd1498c14c3fe6a579b1a84e8bf5 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Tue Jul 6 05:17:25 2010 +0200 + + Updated Spanish translation + + po/es.po | 224 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 117 insertions(+), 107 deletions(-) + +commit 6a7b1bde17eccc47b1af09b2022586926f7b9f42 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 5 21:57:27 2010 +0200 + + Re-add P as shortcut to pause the slideshow + + Happens in the KeyEvent handler as it's not working when linking the + shortcut key to the PauseSlideshow action. Fixes bug #553283. + + src/eog-window.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +commit cc27fe8575eb92cb13fc0ae4e5ae7e514b58b6e7 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jul 5 21:42:00 2010 +0200 + + Add toolbar button to pause the slideshow + + Basically switches between standard fullscreen and slideshow. + Fixes bug #618886. + + data/eog-ui.xml | 2 ++ + src/eog-window.c | 43 +++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 45 insertions(+) + +commit 81f93b598e10b747bac692af4512599898efa814 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 28 23:44:31 2010 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 822fbc1e2762f62e71bf2391d28d4b0d47947d7a +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 28 23:39:43 2010 +0200 + + Update for release 2.31.4 + + NEWS | 33 +++++++++++++++++++++++++++++++++ + 1 file changed, 33 insertions(+) + +commit 21ced20430078aaa283b7925ce282ebb54e05e5d +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 27 14:16:07 2010 +0200 + + Switch EogPropertiesDialog netbook mode using a GSettings binding + + src/eog-window.c | 34 ++++------------------------------ + 1 file changed, 4 insertions(+), 30 deletions(-) + +commit c630747b02a9589a993c28d244448cdc291131e8 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 26 18:10:43 2010 +0200 + + Add API docs for EogScrollView's new properties + + src/eog-scroll-view.c | 14 +++++++++++++- + 1 file changed, 13 insertions(+), 1 deletion(-) + +commit 8c7cf9f8938673eda2843be650b558084b44303e +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 26 17:59:17 2010 +0200 + + Switch scrollwheel zoom setting with GSettings + + Drops another simple value-forwarding signal callback from EogWindow. + + src/eog-scroll-view.c | 19 +++++++++++++++++-- + src/eog-window.c | 32 ++------------------------------ + 2 files changed, 19 insertions(+), 32 deletions(-) + +commit 0cadaebd5c7561991eceaf3ed9af32f50e63b1e9 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 26 17:47:05 2010 +0200 + + Bind zoom multiplier to GSettings instead of setting it by hand + + Another callback less in EogWindow. + + src/eog-scroll-view.c | 17 ++++++++++++++++- + src/eog-window.c | 32 ++------------------------------ + 2 files changed, 18 insertions(+), 31 deletions(-) + +commit 0a898703a9a19589e049a73d21c91898b0dbc51e +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 26 17:19:06 2010 +0200 + + Have the ThumbNav's scrollbuttons bound to the GSettings key + + One signal callback less in EogWindow. + The setting is not updated on changes to the property (eg. by plugins). + + src/eog-window.c | 31 ++++--------------------------- + 1 file changed, 4 insertions(+), 27 deletions(-) + +commit 330c8b841a4f8d9af9b11c76e0d5eb01dce9837c +Author: Gil Forcada <gforcada@gnome.org> +Date: Sat Jun 26 12:22:09 2010 +0200 + + Updated Catalan translation + + help/ca/ca.po | 17 ++++++----------- + 1 file changed, 6 insertions(+), 11 deletions(-) + +commit c88808f4c06872c904da52595c6f8550da87f1e3 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jun 23 23:18:02 2010 +0200 + + Avoid walking string arrays from GSettings when converting to GSLists + + The arrays are returned NULL-terminated by GSettings. Making use of this + we don't need to walk the array first to get it's size when converting + it to a GSList. + + src/eog-plugin-engine.c | 7 ++----- + 1 file changed, 2 insertions(+), 5 deletions(-) + +commit 643d8f405a2cfcb2a7fae702591aab7b3077a209 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jun 23 23:06:47 2010 +0200 + + Remove pre-GLib-2.25.8 compatibility code + + We depend on 2.25.9 now so these won't be needed any longer. + + src/eog-plugin-engine.c | 10 ---------- + 1 file changed, 10 deletions(-) + +commit 4c340931764d65bd53a4ed53082f92302e942fc4 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Tue Jun 22 23:01:53 2010 +0200 + + Updated Spanish translation + + po/es.po | 16 +++++++--------- + 1 file changed, 7 insertions(+), 9 deletions(-) + +commit 2ceb16357b385525b60babef6279ddb7d1185d46 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Tue Jun 22 21:11:44 2010 +0200 + + Updated Spanish translation + + po/es.po | 32 +++++++------------------------- + 1 file changed, 7 insertions(+), 25 deletions(-) + +commit 5f1a6c32e8b88029803d9d2356bef4c402a3dc0d +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Mon Jun 21 10:32:44 2010 +0300 + + Updated Hebrew translation + + po/he.po | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 77c60139d5c7e1ddd51c8d553a642af6683ea0c6 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Sat Jun 19 19:26:14 2010 +0300 + + Updated Hebrew translation. + + po/he.po | 513 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 258 insertions(+), 255 deletions(-) + +commit 3d34c9e9242209c769417db4f4f9a2d6bf0a58e7 +Author: Ivar Smolin <okul@linux.ee> +Date: Sat Jun 19 17:49:53 2010 +0300 + + [l10n] Updated Estonian translation + + po/et.po | 69 ++++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 34 insertions(+), 35 deletions(-) + +commit f28fa11035fbbb3715641e9924313547e32d1fb2 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sat Jun 19 12:24:29 2010 +0200 + + Added Norwegian bokmål translation + + po/nb.po | 26 ++++++++++++++------------ + 1 file changed, 14 insertions(+), 12 deletions(-) + +commit ad75397562e3e253dac29846351259274cefc16d +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jun 18 22:56:03 2010 +0200 + + Update POTFILES.in to include eog-application.c + + The recent totem-scrsaver updates introduced a translatable string here. + + po/POTFILES.in | 1 + + 1 file changed, 1 insertion(+) + +commit b222bb232cf40336145c7450a8dc51536eab939e +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jun 18 22:45:36 2010 +0200 + + Depend on GIO 2.25.9 for latest GDBus patches + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 0ceccc72264ec27d56689846af88e73759cad2aa +Author: Florian Müllner <fmuellner@gnome.org> +Date: Fri Jun 18 15:42:34 2010 +0000 + + Adapt to GDBus API change + + cut-n-paste/totem-screensaver/totem-scrsaver.c | 77 +++++++++++++------------- + 1 file changed, 40 insertions(+), 37 deletions(-) + +commit 63b4670443d0900f3203bd8ca2cd3fd84c82f9e9 +Author: Bastien Nocera <hadess@hadess.net> +Date: Sun Jun 13 13:31:40 2010 +0100 + + Update totem-scrsaver from upstream + + Update from recent evince and totem changes, port to libgdbus. + + https://bugzilla.gnome.org/show_bug.cgi?id=621439 + + configure.ac | 2 +- + cut-n-paste/totem-screensaver/totem-scrsaver.c | 382 +++++++++++++++---------- + cut-n-paste/totem-screensaver/totem-scrsaver.h | 24 +- + po/POTFILES.in | 1 - + src/eog-application.c | 5 +- + 5 files changed, 242 insertions(+), 172 deletions(-) + +commit 523ed9e67749b94baee6d77c4273d1abb2cc7229 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Fri Jun 18 21:25:11 2010 +0200 + + Updated Galician translations + + po/gl.po | 272 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 136 insertions(+), 136 deletions(-) + +commit e636f3d7af15a0a902d492a4e35a25b71b26f320 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Thu Jun 17 07:27:38 2010 +0200 + + Updated Spanish translation + + help/es/es.po | 163 ++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 106 insertions(+), 57 deletions(-) + +commit 3fbb4d82b360d94217cb02dd6455bd5c2e2ae269 +Author: Timo Jyrinki <timo.jyrinki@iki.fi> +Date: Wed Jun 16 23:33:09 2010 +0300 + + Add Finnish help translation by Jukka Heikkilä. + + help/Makefile.am | 2 +- + help/fi/fi.po | 1510 +++++++++++++++++++++++++ + help/fi/figures/eog_save_as_window.png | Bin 0 -> 25648 bytes + help/fi/figures/eog_start_window.png | Bin 0 -> 14190 bytes + help/fi/figures/eog_toolbar_editor_window.png | Bin 0 -> 22618 bytes + 5 files changed, 1511 insertions(+), 1 deletion(-) + +commit 68238a695a7b256d8db8a356d940ce636ede0fc7 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Wed Jun 16 06:21:25 2010 +0200 + + Updated Spanish translation + + po/es.po | 116 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--------- + 1 file changed, 101 insertions(+), 15 deletions(-) + +commit f6be24f5b3d2c015946c07a5d61f6fa03cf94e1e +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Wed Jun 16 06:17:18 2010 +0200 + + Updated Spanish translation + + po/es.po | 534 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 252 insertions(+), 282 deletions(-) + +commit 548e96ae2ef33d2ee58454cd00eab1a8e813f8e7 +Author: Claudio Saavedra <csaavedra@igalia.com> +Date: Tue Jun 15 18:47:18 2010 +0300 + + Fix build without libjpeg + + AM_CONDITIONAL calls should be called always, otherwise configure + gets confused. + + Fixes bug #621616. + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 5d25772d45cee96633d8804e5e13211253db1621 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sun Jun 13 23:35:33 2010 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 434 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 231 insertions(+), 203 deletions(-) + +commit 009a8205ccee9446a703b864e6baf81febe9b080 +Author: Mario Blättermann <mariobl@gnome.org> +Date: Sun Jun 13 21:14:35 2010 +0200 + + Updated German doc translation + + help/de/de.po | 580 +++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 309 insertions(+), 271 deletions(-) + +commit 47b84374f549e7c8b84497ad47a883c0a363dc77 +Author: Mario Blättermann <mariobl@gnome.org> +Date: Sun Jun 13 20:49:16 2010 +0200 + + Updated German translation + + po/de.po | 563 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 317 insertions(+), 246 deletions(-) + +commit 7d202bcf8df2563cd965b65930ff7a1ea32436bd +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 13 13:27:29 2010 +0200 + + Rename "Image Collection" to "Image Gallery" + + This is more fitting. Based on propsal by Allan Day. Fixes bug #618304. + + data/eog-toolbar.xml | 2 +- + data/eog-ui.xml | 4 +- + data/eog.schemas.in | 20 +-- + data/gtkrc | 4 +- + data/icons/16x16/Makefile.am | 2 +- + ...-image-collection.png => eog-image-gallery.png} | Bin + data/icons/22x22/Makefile.am | 2 +- + ...-image-collection.png => eog-image-gallery.png} | Bin + data/icons/24x24/Makefile.am | 2 +- + ...-image-collection.png => eog-image-gallery.png} | Bin + data/icons/32x32/Makefile.am | 4 +- + ...-image-collection.png => eog-image-gallery.png} | Bin + ...-image-collection.svg => eog-image-gallery.svg} | 0 + data/icons/scalable/Makefile.am | 2 +- + ...-image-collection.svg => eog-image-gallery.svg} | 0 + data/org.gnome.eog.gschema.xml.in.in | 14 +- + help/C/eog.xml | 18 +-- + src/eog-config-keys.h | 6 +- + src/eog-thumb-nav.c | 2 +- + src/eog-window.c | 164 +++++++++++---------- + src/eog-window.h | 2 +- + src/main.c | 8 +- + 22 files changed, 129 insertions(+), 127 deletions(-) + +commit 0365c8aa6b6ffb7e75af91234bfeb3aa651bb52a +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sun Jun 13 01:42:34 2010 +0200 + + Updated Galician translations + + po/gl.po | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +commit d47a84c1eb94518e9f82ab084964588344316570 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sat Jun 12 19:08:28 2010 +0200 + + Updated Galician translations + + po/gl.po | 236 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 118 insertions(+), 118 deletions(-) + +commit cd8d7e15cca41fa2234a8c2c87944d722ff6dfb4 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sat Jun 12 19:06:36 2010 +0200 + + Updated Galician translations + + po/gl.po | 390 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 213 insertions(+), 177 deletions(-) + +commit 573d5af2fe62d32972cce7b6089aabf6f34a79b5 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jun 9 23:18:12 2010 +0200 + + Support using a sealed GDK library + + Only works reliable as of GDK-2.21.2 due to API changes in that + version. + + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 14 ++++++++++++++ + src/eog-window.c | 5 +++++ + 2 files changed, 19 insertions(+) + +commit ff509b7df8fd17abceceb2baa37ef4d45b301461 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 12 18:52:53 2010 +0200 + + Make GSettings key description match the GConf one + + Saves one wrong translation. + + data/org.gnome.eog.gschema.xml.in.in | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ea478326b68a8eba0a119eec92ac5374c00fe2b3 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 12 18:52:12 2010 +0200 + + Make GConf keys match the new GSettings keys + + data/eog.schemas.in | 58 ++++++++++++++++++++++++++--------------------------- + 1 file changed, 29 insertions(+), 29 deletions(-) + +commit 6cb2ce2c72ce91f4f56d9110d7326e5ede86d7f9 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 12 18:48:54 2010 +0200 + + Make forgotten GSettings keys use the key macros + + src/eog-window.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +commit afac01c63d764fc1b111698ef0b76473e8cfc96d +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 12 18:46:28 2010 +0200 + + Make GSettings keys follow the new naming conventions + + This caused build failures for other modules, so we had to do it now. + Fixes bug #621370. + + data/Makefile.am | 3 +-- + data/org.gnome.eog.gschema.xml.in.in | 26 +++++++++++++------------- + src/eog-config-keys.h | 24 ++++++++++++------------ + 3 files changed, 26 insertions(+), 27 deletions(-) + +commit 41a34c8a7389d238b7e7fb936fe8c430ff4e4311 +Author: Kristjan Schmidt <kristjan.schmidt@googlemail.com> +Date: Wed Jun 9 18:30:37 2010 +0200 + + Add Esperanto translation + + po/LINGUAS | 1 + + 1 file changed, 1 insertion(+) + +commit 1bc159046d15a445ff4f0fc64243704436a242c4 +Author: Kristjan Schmidt <kristjan.schmidt@googlemail.com> +Date: Wed Jun 9 18:30:35 2010 +0200 + + Add Esperanto translation + + po/eo.po | 1427 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 1427 insertions(+) + +commit 36657892fb847228d0b0f614c19b03c2441f32ee +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 7 22:51:56 2010 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit f2aaad9d04254543486b9016001fc421d3776a0b +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 7 22:49:51 2010 +0200 + + Readd GConf schema definition to tarball + + At least until we don't use GConf anymore. + + data/Makefile.am | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +commit 02caffcf23cf4d2e802f32fbe57f875b724b70de +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jun 7 22:46:03 2010 +0200 + + Prepare for release 2.31.3 + + NEWS | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +commit ddc6aba85b8df524e918fa37e88bd5be8797a068 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Mon Jun 7 16:12:44 2010 +0300 + + Updated Hebrew translation. + + po/he.po | 403 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 220 insertions(+), 183 deletions(-) + +commit 3377dc887ccf8caab4bc69fc69d2320c6e947628 +Author: Ivar Smolin <okul@linux.ee> +Date: Mon Jun 7 10:48:33 2010 +0300 + + Estonian translation updated + + po/et.po | 48 +++++++++++++++++++++++++++++++----------------- + 1 file changed, 31 insertions(+), 17 deletions(-) + +commit caf81e8f9e27419dd8ec96ebaaf616b669e04977 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 6 22:07:08 2010 +0200 + + Allow setting a user-defined background color + + This allows the user to have another color instead of the theme defined + color as background. For now requires a loaded image until we can + finally fix bug 538279. Fixes bug 502992. + + data/eog-preferences-dialog.ui | 595 ++++++++++++----------------------- + data/org.gnome.eog.gschema.xml.in.in | 10 + + src/eog-config-keys.h | 2 + + src/eog-preferences-dialog.c | 13 + + src/eog-scroll-view.c | 93 +++++- + src/eog-scroll-view.h | 2 +- + 6 files changed, 315 insertions(+), 400 deletions(-) + +commit 4087bc9130b489935a6460061d166ef23524bf7f +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 6 16:41:26 2010 +0200 + + [GSettings] Fix whitespace errors + + src/eog-plugin-engine.c | 2 +- + src/eog-window.c | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit 2ef93aa989530950c675a336661475afd29cd1e6 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 6 16:31:31 2010 +0200 + + [GSettings] Remove more unneeded gconf-client.h includes + + src/eog-file-chooser.c | 2 -- + 1 file changed, 2 deletions(-) + +commit 1207e0f363e06f977eb6f9fb82519f9d421845ad +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 6 16:16:19 2010 +0200 + + [GSettings] Remove now obsolete gconf_client_add_dir call + + src/eog-config-keys.h | 1 - + src/eog-window.c | 4 ---- + 2 files changed, 5 deletions(-) + +commit edd73fd3f31d7e9e10729546643b4a06a9d58572 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 6 16:12:26 2010 +0200 + + [GSettings] Port EogPluginEngine to GSettings + + Reuses the GSettings list helpers from gedit by Ignacio Casal Quinteiro, + modified to empty lists. Also has a temporary workaround for an API + change in the upcoming glib-2.25.8 which can go out again once we can + hard-depend on that version. + + src/eog-config-keys.h | 2 +- + src/eog-plugin-engine.c | 150 +++++++++++++++++++++++++++++------------------- + 2 files changed, 93 insertions(+), 59 deletions(-) + +commit 8a554fc717522b12b79260c82ad6328760cfcf8e +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jun 6 14:44:09 2010 +0200 + + [GSettings] Turn settings keys into preprocessor macros again + + src/eog-config-keys.h | 49 +++++++++++--------- + src/eog-preferences-dialog.c | 43 +++++++++--------- + src/eog-window.c | 105 +++++++++++++++++++++++++------------------ + 3 files changed, 109 insertions(+), 88 deletions(-) + +commit 68f8d67f01435f840a8fbff976e056f091b6c436 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 5 17:17:03 2010 +0200 + + [GSettings] Hook GSettings schema into intltool + + These translations seem to be of no use yet, but we avoid possibly + losing the former GConf schema translations this way. + + configure.ac | 1 + + data/org.gnome.eog.gschema.xml | 114 ----------------------------------- + data/org.gnome.eog.gschema.xml.in.in | 114 +++++++++++++++++++++++++++++++++++ + po/POTFILES.in | 1 + + po/POTFILES.skip | 1 + + 5 files changed, 117 insertions(+), 114 deletions(-) + +commit 5090409a75274ac091901c9afe7d02d06e9e1ad2 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 5 16:57:10 2010 +0200 + + [GSettings] Migrate EogWindow to GSettings as fas as currently possible + + This is a dumb migration. It's not taking any advantage of + GSettings' advanced features yet, as the task was to get it running + first. Next would be moving several settings onto EogScrollView itself. + Also some settings still use GConf as they belong to other packages. + + src/eog-window.c | 431 ++++++++++++++++++++----------------------------------- + 1 file changed, 156 insertions(+), 275 deletions(-) + +commit dd7c43457ac1602e49e43a4d79ad26dd09aeaad8 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jun 5 12:45:30 2010 +0200 + + [GSettings] Call glib-compile-schemas with allow-any-name parameter for now + + This needed as our schema keys are not yet following the new naming + scheme. Until we've fixed them we need to override this error check. + + data/Makefile.am | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit 667693ec829779ae96cb2c9b2fb0e692796c1d2e +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 30 22:52:07 2010 +0200 + + [GSettings] Convert EogPreferencesDialog to GSettings + + src/eog-preferences-dialog.c | 287 ++++++++++--------------------------------- + src/eog-preferences-dialog.h | 4 +- + src/eog-window.c | 3 +- + 3 files changed, 69 insertions(+), 225 deletions(-) + +commit e5dd87f49e311b11681c84b06254ff2bc675d676 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 30 22:49:10 2010 +0200 + + [GSettings] Add GSettings schema file + + configure.ac | 1 + + data/Makefile.am | 13 +++-- + data/org.gnome.eog.gschema.xml | 114 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 124 insertions(+), 4 deletions(-) + +commit 7ad810cd28733d3288665dbdc77ef582ec321fb2 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 30 15:00:47 2010 +0200 + + [GSettings] Use the gconf GSettings backend + + At least until the whole desktop is migrated. + + src/main.c | 2 ++ + 1 file changed, 2 insertions(+) + +commit a288a19e78bcf23edd60b6d07250f198f792326b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 30 15:00:10 2010 +0200 + + [GSettings] Bump GLib and GConf requirements for GSettings migration + + GConf 2.31+ is only needed for the corresponding backend + until the whole desktop is converted. + + configure.ac | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +commit 0ac09ea58b240285b7e57ff1498b23a8b704b882 +Author: Sira Nokyoongtong <gumaraa@gmail.com> +Date: Fri Jun 4 21:02:55 2010 +0700 + + Updated Thai translation. + + po/th.po | 664 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 333 insertions(+), 331 deletions(-) + +commit b9c1cb99bf7b6df3c9d7af00996fdc704732e45f +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jun 3 23:30:39 2010 +0200 + + Move Python.h include into the right spot + + Python.h is required to be included before any standard header. + Also it's not needed in its old position, but is in its new. + This fixes compiler warnings about redefining _POSIX_C_SOURCE. + + src/eog-python-module.c | 4 ++++ + src/eog-python-module.h | 1 - + 2 files changed, 4 insertions(+), 1 deletion(-) + +commit d1fb2e4b8f74b4944af86347654dd57e22358230 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 30 22:52:28 2010 +0200 + + Remove unneeded gconf-client.h include + + src/main.c | 1 - + 1 file changed, 1 deletion(-) + +commit c8c35a264eddbc68197d76dc58de17960ec5366d +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jun 3 23:06:04 2010 +0200 + + Possibly delete the SVG background when changing the background color + + If the transparency is set to show the viewing area's background color + while changing the area's color the SVG background needs to be updated. + To achieve this it's simply deleted. The next redraw, which will be + triggered by changing the view's background color, will recreate it. + + src/eog-scroll-view.c | 11 +++++++++-- + 1 file changed, 9 insertions(+), 2 deletions(-) + +commit 6d72a53126dd881fac55280b27b06be659335696 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jun 3 23:01:34 2010 +0200 + + Delete SVG background when changing transparency settings + + This has it recreated with the correct transparency settings on the next + redraw (which is triggered directly afterwards). Fixes wrong SVG display + when changing the transparency settings with an image loaded. + + src/eog-scroll-view.c | 5 +++++ + 1 file changed, 5 insertions(+) + +commit b065620dbed2101c40fbf97e1e0f18e99dd9825d +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jun 3 21:07:52 2010 +0200 + + Fix API docs about new background color property + + src/eog-scroll-view.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 81c54cef2b4017b1a510e4d4d3d163799e8540fb +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jun 3 17:20:18 2010 +0200 + + Cleanup the updating code for the two bg color fields in EogScrollView + + Looks a lot cleaner now. + + src/eog-scroll-view.c | 71 +++++++++++++++++++++++---------------------------- + 1 file changed, 32 insertions(+), 39 deletions(-) + +commit c42a931817a07554379d90c44d5923b358a9998b +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Jun 3 16:52:27 2010 +0200 + + Add fallback background color support to EogScrollView + + This allows to temporarily set the view's background color and fallback + to a predetermined default or the theme's color. Necessary to make the + color user settable and still allowing us to override it, e.g. for the + fullscreen mode. + + src/eog-scroll-view.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++++-- + src/eog-scroll-view.h | 5 +- + src/eog-window.c | 5 +- + 3 files changed, 150 insertions(+), 6 deletions(-) + +commit 2f6bd8b2bb348c8875157d6fd5b4dfae76686e79 +Author: Yaron Shahrabani <sh.yaron@gmail.com> +Date: Thu May 27 17:32:58 2010 +0300 + + Updated Hebrew translation. + + po/he.po | 284 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 144 insertions(+), 140 deletions(-) + +commit 4aee935ab8a3794dae3b02b1f3d3fbb1f7cb763d +Author: Felix Riemann <friemann@gnome.org> +Date: Tue May 25 21:14:16 2010 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 6c5d8107af975db20f738f0f57fe7ccfb7fdf9f8 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue May 25 21:06:08 2010 +0200 + + Prepare for release 2.31.2 + + NEWS | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +commit a7744868630186234e1918739d937391ba790667 +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Sun May 23 14:23:20 2010 +0200 + + Dutch translation updated by Wouter Bolsterlee + + po/nl.po | 282 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 144 insertions(+), 138 deletions(-) + +commit 3dde1e5ebc0364851b561e9243a26717df947a72 +Author: Thomas Thurman <tthurman@gnome.org> +Date: Mon May 17 13:23:02 2010 -0400 + + Update Shavian translation + + po/en@shaw.po | 209 ++++++++++++++++++---------------------------------------- + 1 file changed, 65 insertions(+), 144 deletions(-) + +commit acf50a975145771c9de3158fba0080bca5806333 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Fri May 14 20:15:12 2010 +0200 + + Updated Slovenian translation + + po/sl.po | 450 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 226 insertions(+), 224 deletions(-) + +commit ef490b69f6edddc4b3ed739feefa0302f07a59d9 +Author: Ihar Hrachyshka <ihar.hrachyshka@gmail.com> +Date: Fri May 14 00:26:59 2010 +0300 + + Updated Belarusian translation + + po/be.po | 2311 ++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 1038 insertions(+), 1273 deletions(-) + +commit 5078ea5e0a38c898c26f35fa8b22568f19ca72c6 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu May 13 21:37:41 2010 +0200 + + Finish making EogScrollView GSEAL-compatible. + + Eog should be completely GSEAL-compatible now. + Completes bug 606883. + + src/eog-scroll-view.c | 62 ++++++++++++++++++++++++++++----------------------- + 1 file changed, 34 insertions(+), 28 deletions(-) + +commit 7dd81d8d4b1a67a89cb33880df48a63a464db4dd +Author: Felix Riemann <friemann@gnome.org> +Date: Thu May 13 21:22:45 2010 +0200 + + Make the easy parts of EogScrollView GSEAL-compatible + + Part of bug 606883. + + src/eog-scroll-view.c | 98 ++++++++++++++++++++++++++------------------------- + 1 file changed, 50 insertions(+), 48 deletions(-) + +commit 2fc271e3b0c918ee07608efc96bc9e7890be56be +Author: Felix Riemann <friemann@gnome.org> +Date: Thu May 13 15:08:46 2010 +0200 + + Constify transform lookup table + + src/eog-image.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c2647d86d7a79d276fae4c395cdf52075d96205f +Author: Thomas Thurman <tthurman@gnome.org> +Date: Wed May 12 18:41:42 2010 -0400 + + Updated Shavian transliteration + + po/en@shaw.po | 923 ++++++++++++++++++++++++++++++++++++++-------------------- + 1 file changed, 614 insertions(+), 309 deletions(-) + +commit 8680c068d6c9b4513b10cdc3c42bd8a8ea0b96dd +Author: Manoj Kumar Giri <mgiri@mgiri.csb> +Date: Wed May 12 12:15:15 2010 +0530 + + Updated Oriya Translation + + po/or.po | 825 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 493 insertions(+), 332 deletions(-) + +commit 15d23daf9b43d9cb632033518ec88458b26d61e8 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 9 22:16:12 2010 +0200 + + Make EogPluginEngine GSEAL-compatible + + Has a workaround for the different behaviour of gtk_window_get_group() + that makes sure that the configure dialog and its parent share a window + group of their own as before. Not sure if it's needed. + Part of bug 606883. + + src/eog-plugin-engine.c | 7 +++++-- + 1 file changed, 5 insertions(+), 2 deletions(-) + +commit d53d169824923c4851f8b2abac520be10846415e +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 9 21:19:25 2010 +0200 + + Make EogThumbNav GSEAL-compatible + + Part of bug 606883. + + src/eog-thumb-nav.c | 36 +++++++++++++++++++----------------- + 1 file changed, 19 insertions(+), 17 deletions(-) + +commit fd8fac07cfc426d4b419155874e2417c118de92f +Author: Felix Riemann <friemann@gnome.org> +Date: Sun May 9 14:37:00 2010 +0200 + + When generating the settings directory also create it's parents + + Fixes warnings and unsaved toolbars when ~/.gnome2 does not exists yet. + Also set the directory permissions less permissive by default. + See: http://mail.gnome.org/archives/eog-list/2010-May/msg00003.html + + src/eog-util.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 6a7a94e6ded816050e1eb002a77f047a955891f0 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 3 22:22:55 2010 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 30e3348dc261a96d35347b6c8983cfdba49e1324 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 3 22:18:40 2010 +0200 + + Prepare for 2.31.1 + + NEWS | 45 +++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 45 insertions(+) + +commit 3f5ee79db7689bfa2a2ad4d813efdeb8e8d95dc3 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon May 3 00:26:13 2010 +0200 + + Generate separator pixbuf using an offscreen window + + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 75 +++-------------------- + 1 file changed, 7 insertions(+), 68 deletions(-) + +commit f10411901ad9b8d3a87f7e8ef4312d016a76407d +Author: Andre Klapper <a9016009@gmx.de> +Date: Wed Apr 14 17:24:49 2010 +0200 + + Make libegg code and EogWindow GSEAL-compatible. See bug 606883. + + configure.ac | 2 +- + cut-n-paste/toolbar-editor/egg-editable-toolbar.c | 50 ++++++++++++----------- + cut-n-paste/toolbar-editor/egg-toolbar-editor.c | 8 ++-- + src/eog-window.c | 24 +++++++++++ + 4 files changed, 55 insertions(+), 29 deletions(-) + +commit db5f8cf7eaf39337a9d0a03069e4e7d852125908 +Author: Fran Diéguez <fran.dieguez@mabishu.com> +Date: Sat May 1 21:35:44 2010 +0200 + + Updated Galician translation + + po/gl.po | 201 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 102 insertions(+), 99 deletions(-) + +commit 41e9d8bf5adbfdb0b8bf72b1b96394e4c1d358ce +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sat May 1 19:25:07 2010 +0200 + + Updated Norwegian bokmål translation + + po/nb.po | 292 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 144 insertions(+), 148 deletions(-) + +commit 15123149313ccfcc423d45238308d155ec1a31c7 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Thu Apr 29 17:39:30 2010 +0200 + + Updated Spanish translation + + po/es.po | 201 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 102 insertions(+), 99 deletions(-) + +commit e633cf790c20e4d6ae692c307b9106cdb98746c8 +Author: Ivar Smolin <okul@linux.ee> +Date: Thu Apr 29 17:28:47 2010 +0300 + + Estonian translation updated + + po/et.po | 40 +++++++++++++++++++++++----------------- + 1 file changed, 23 insertions(+), 17 deletions(-) + +commit 92207fdf7a2148e13e890b8ab1aa32e02a6436b8 +Author: Gabriel Corvalan Cornejo <just.the.boss@gmail.com> +Date: Wed Apr 28 22:34:56 2010 +0200 + + Make strings during image opening consistent with menu item + + The menu item talks about opening an image. So should the file open + dialog and the status while the image is opened. (bug 614497) + + src/eog-file-chooser.c | 2 +- + src/eog-window.c | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit f55ae89b086d864e0c47af1432fda6d6c8ca42dc +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Apr 28 20:25:24 2010 +0200 + + Reorder menu items to make menus more intuitive and less confusing + + Based on a proposal by Hylke Bons. Most visible change is the 'File' + menu now being more specifically called as 'Image' now as that's what + we're talking about in this case. + Also the action names were adjusted to be in line with the others. + This causes custom toolbars to loose these items on the first start. + (bug 614457) + + data/eog-toolbar.xml | 8 +++---- + data/eog-ui.xml | 57 +++++++++++++++++++++++++------------------------- + src/eog-window.c | 59 ++++++++++++++++++++++++++-------------------------- + 3 files changed, 61 insertions(+), 63 deletions(-) + +commit 6c3ee0d11b05e8bd40038834999f492ffb22e682 +Author: Carles Ferrando <carles.ferrando@gmail.com> +Date: Thu Apr 22 22:54:03 2010 +0200 + + Updated Catalan (Valencian) translation + + po/ca@valencia.po | 735 ++++++++++++++++++++++++++++++------------------------ + 1 file changed, 416 insertions(+), 319 deletions(-) + +commit 0d9a230e81c2b33ef0fac744601483c3c5083826 +Author: Amitakhya Phukan <aphukan@fedoraproject.org> +Date: Thu Apr 22 16:24:58 2010 +0530 + + Updating Assamese translations. + + po/as.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit cf9e24cd77513db9384c875494ea00d5657a8525 +Author: Shankar Prasad <sprasad@git.gnome.org> +Date: Thu Apr 22 12:34:46 2010 +0530 + + Updated Kannada translations + + po/kn.po | 692 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 398 insertions(+), 294 deletions(-) + +commit 871c2c2c97bc5bb3ada342c8ef27c310f4d22847 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Apr 18 15:42:57 2010 +0200 + + Add simple printing support for SVGs + + Use librsvg to draw the SVGs to the cairo context during printing. + Should improve print quality quite a bit. Fixes bug 518055. + + src/eog-print.c | 31 ++++++++++++++++++++++++------- + 1 file changed, 24 insertions(+), 7 deletions(-) + +commit 1e488a50cfd86c056bc4128a83d50e8b92b373ea +Author: Hiroyuki Ikezoe <poincare@ikezoe.net> +Date: Sat Apr 10 17:00:48 2010 +0900 + + Use rsvg_handle_set_base_uri to resolve relative path. + + (bug 615344) + + src/eog-image.c | 4 ++++ + 1 file changed, 4 insertions(+) + +commit 21caf5f03041e236157e967bf2c07832b5ba551b +Author: Hiroyuki Ikezoe <hiikezoe@gnome.org> +Date: Sun Apr 18 14:12:17 2010 +0200 + + Render SVGs using librsvg when filtering is enabled + + Redraws scaled SVGs correctly instead of just showing a scaled and + filtered pixbuf. Note that depending on the filters used by the image + rendering can be quite slow at large zoom factors. Fixes bug 108435. + + configure.ac | 18 ++++ + src/eog-image-private.h | 6 ++ + src/eog-image.c | 68 ++++++++++++++- + src/eog-image.h | 10 +++ + src/eog-scroll-view.c | 226 +++++++++++++++++++++++++++++++++++++++++++----- + src/eog-transform.c | 11 +++ + src/eog-transform.h | 2 + + src/main.c | 6 ++ + 8 files changed, 320 insertions(+), 27 deletions(-) + +commit e89ebc3220f2cab15c998af8891d93c2499afe72 +Author: Francisco Diéguez <fran.dieguez@mabishu.com> +Date: Sat Apr 17 22:12:54 2010 +0200 + + Updated Galician translations + + po/gl.po | 258 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 130 insertions(+), 128 deletions(-) + +commit d0b25ee106aefd325445ebd755c2ef95ecddeb40 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Apr 17 19:00:52 2010 +0200 + + Updated Spanish translation + + po/es.po | 255 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 130 insertions(+), 125 deletions(-) + +commit a662d6822112fd173b7ce9a803e7e4a593a26b18 +Author: Hylke Bons <hylkebons@gmail.com> +Date: Sat Apr 17 17:58:12 2010 +0200 + + Merge smaller SVG variants of eog's logo into a single one-canvas SVG + + (bug 615356) + + data/icons/16x16/Makefile.am | 1 - + data/icons/16x16/apps/eog.svg | 339 --------- + data/icons/22x22/Makefile.am | 1 - + data/icons/22x22/apps/eog.svg | 530 -------------- + data/icons/32x32/Makefile.am | 1 - + data/icons/32x32/apps/eog.svg | 537 --------------- + data/icons/scalable/Makefile.am | 5 + + data/icons/scalable/apps/eog-onecanvas.svg | 1025 ++++++++++++++++++++++++++++ + 8 files changed, 1030 insertions(+), 1409 deletions(-) + +commit 62ff42f013a17135e12b4f02480bdbaa80cf288b +Author: Hylke Bons <hylkebons@gmail.com> +Date: Sat Apr 17 16:15:41 2010 +0200 + + Add 256x256 high resolution app icon + + This is going to be used by gnome-shell's ALT+TAB switcher for example. + (bug 615356) + + configure.ac | 1 + + data/icons/256x256/Makefile.am | 7 +++++++ + data/icons/256x256/apps/eog.png | Bin 0 -> 47467 bytes + data/icons/Makefile.am | 2 +- + 4 files changed, 9 insertions(+), 1 deletion(-) + +commit e39dae81cbe687bfd10c4c854e4defd871841486 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Apr 17 16:08:29 2010 +0200 + + Add --version command line parameter + + (bug 615531) + + src/main.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +commit 07e1128a516ceea68add62808a7cc4bb9a5d325d +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Apr 14 21:20:57 2010 +0200 + + Make silent build more silent + + eggtypebuiltins were still built verbosely + + cut-n-paste/toolbar-editor/Makefile.am | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit d8ab8cb6e4ba80962003b75f2aaa50d17d4ad48a +Author: Hylke Bons <hylkebons@gmail.com> +Date: Wed Apr 14 20:48:44 2010 +0200 + + Force-show icons for recent file list in File menu + + (bug 614405) + + src/eog-window.c | 1 + + 1 file changed, 1 insertion(+) + +commit cffc41e7b0f255cdaf82052dad83ff1539599fdb +Author: Marek Kasik <mkasik@redhat.com> +Date: Fri Apr 2 15:00:26 2010 +0200 + + Embed page setup in the print dialog + + This patch activates paper size combo and orientation combo in the + Page Setup tab in the print dialog. It removes "Page Setup..." from + the file menu. It also actualize paper size in Image Settings each + time it changes. (bug 614451) + + data/eog-ui.xml | 1 - + src/eog-print-image-setup.c | 31 +++++++++++++++++++++++++++++++ + src/eog-print-image-setup.h | 5 +++++ + src/eog-print.c | 7 ++++++- + src/eog-window.c | 44 +------------------------------------------- + 5 files changed, 43 insertions(+), 45 deletions(-) + +commit 30986c8d4c95ec804c6e93251fa69c3ff371bbe6 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Apr 14 20:43:18 2010 +0200 + + Post-branch version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 55583e9f2cdbe39dbfeb1c09c6c4d2a852342552 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Apr 14 20:25:36 2010 +0200 + + Fix msgfmt errors that prevent branching + + Mark strings fuzzy that prevent creating a new branch. + The affected strings are not used anyway, so there's no impact to users. + + po/ug.po | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit 1f519331070f4fc7f2f3f01a54880db18defa8c0 +Author: Yannig Marchegay <yannig@marchegay.org> +Date: Wed Apr 14 13:54:13 2010 +0200 + + Occitan translation update + + po/oc.po | 1 + + 1 file changed, 1 insertion(+) + +commit 7f06d2bd3e0d895fd8b3f8cc4241830a5c31777b +Author: Yannig Marchegay <yannig@marchegay.org> +Date: Wed Apr 14 13:53:27 2010 +0200 + + Occitan translation update + + po/oc.po | 3 +++ + 1 file changed, 3 insertions(+) + +commit 88bace02ff11500600088264e6df7703a1ed9d39 +Author: Yannig Marchegay <yannig@marchegay.org> +Date: Wed Apr 14 13:51:59 2010 +0200 + + Occitan translation update + + po/oc.po | 1000 ++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 619 insertions(+), 381 deletions(-) + +commit 3e60de77b38ad35fed4336666af3b12e6532d1ca +Author: Ani Peter <apeter@redhat.com> +Date: Wed Apr 14 14:57:56 2010 +0530 + + Updated Malayalam Translation + + po/ml.po | 687 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 410 insertions(+), 277 deletions(-) + +commit 6ba8f5bc495dd2da1edac7447149c20018df10f8 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Apr 13 23:57:44 2010 +0200 + + Fix typo preventing build with libjpeg-6 + + jpegutils/transupp.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit f9ee2fc69f19b864af3e3eadfed005a7d31c52a9 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Apr 13 23:16:29 2010 +0200 + + Update to latest git.mk from Pango + + git.mk | 7 +++++-- + 1 file changed, 5 insertions(+), 2 deletions(-) + +commit a9fda91a1482ba9efb99e439ead89fe0972f032e +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Apr 13 23:06:39 2010 +0200 + + Ship header forgotten in last commit + + Forgot to add this header with commit 620ee28f. + + jpegutils/jpegint-8a.h | 407 +++++++++++++++++++++++++++++++++++++++++++++++++ + jpegutils/jpegint.h | 7 + + 2 files changed, 414 insertions(+) + +commit 620ee28f8896e7a195c0a6169abd251d9e82da25 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Apr 13 22:55:06 2010 +0200 + + Fix lossless JPEG rotation when using libjpeg-8 + + This is mostly a port of the corresponding patch for gThumb by + Paolo Bacchilega (bug 612809). Since it's needed by the newer transupp + we also ship the internal jpegint.h header as done by digiKam to + workaround distros that do not ship it by default. Fixes bug 615387. + + configure.ac | 17 + + jpegutils/Makefile.am | 15 +- + jpegutils/{README => README.6b} | 0 + jpegutils/README.8a | 325 +++++++ + jpegutils/{transupp.c => transupp-6b.c} | 2 +- + jpegutils/{transupp.h => transupp-6b.h} | 0 + jpegutils/transupp-8a.c | 1609 +++++++++++++++++++++++++++++++ + jpegutils/transupp-8a.h | 215 +++++ + jpegutils/transupp.h | 162 +--- + src/eog-image-jpeg.c | 5 +- + 10 files changed, 2189 insertions(+), 161 deletions(-) + +commit 9c1de12ccb106a54d8555281155a800725244d1c +Author: Runa Bhattacharjee <runab@redhat.com> +Date: Tue Apr 13 12:27:06 2010 +0530 + + Typos corrected + + po/bn_IN.po | 42 +++++++----------------------------------- + 1 file changed, 7 insertions(+), 35 deletions(-) + +commit 9b2d8c5d186e2c7b1379b11c92ce2245b1669867 +Author: Runa Bhattacharjee <runab@redhat.com> +Date: Tue Apr 13 12:05:39 2010 +0530 + + Typos corrected + + po/bn_IN.po | 702 ++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 424 insertions(+), 278 deletions(-) + +commit 9cd3607bb481ed0e16c6f9dd2a89fb2f1b53dfc7 +Author: Sandeep Shedmake <sshedmak@redhat.com> +Date: Tue Apr 13 09:49:49 2010 +0530 + + Updated Marathi Translations + + po/mr.po | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 9698c9de5c7b9a6219d0a97da38b9972400c8700 +Author: Žygimantas Beručka <zygis@gnome.org> +Date: Sat Apr 10 21:55:21 2010 +0300 + + Updated Lithuanian translation + + po/lt.po | 96 +++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 46 insertions(+), 50 deletions(-) + +commit 5777a486416cd63fb4dc78ea0d2d8426c97c24a5 +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Tue Apr 6 14:16:39 2010 +0700 + + Updated Thai translation. + + po/th.po | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +commit 16ebac9877c836a44d5145d2e1b7fca455409e6d +Author: Anita Reitere <nitalynx@gmail.com> +Date: Mon Apr 5 18:11:37 2010 +0300 + + Updated Latvian translation. + + po/lv.po | 773 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 466 insertions(+), 307 deletions(-) + +commit 77aa9d1900538d8eee3a62d736cb0433316877f3 +Author: Jordi Serratosa <jordis.lists@gmail.com> +Date: Thu Apr 1 21:45:45 2010 +0200 + + Fixes to Catalan translation + + po/ca.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 021b9aa48630eae14e10eb8a10d9ad3f155bc645 +Author: krishnababu k <kkrothap@redhat.ocm> +Date: Thu Apr 1 19:05:18 2010 +0530 + + Updated Telugu Translations + + po/te.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 2c75691b3c0a50049bbe66ddae34711eedefb45e +Author: Sandeep Shedmake <sshedmak@redhat.com> +Date: Thu Apr 1 18:20:59 2010 +0530 + + Updated Marathi Translations + + po/mr.po | 295 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 163 insertions(+), 132 deletions(-) + +commit 8190fd06910e70506ff8a7287c43267f3ac9a415 +Author: krishnababu k <kkrothap@redhat.ocm> +Date: Thu Apr 1 18:04:11 2010 +0530 + + Updated Telugu Translations + + po/te.po | 680 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 409 insertions(+), 271 deletions(-) + +commit 98672a01280338078ac5a06a9b66663c99470bef +Author: Wouter Bolsterlee <wbolster@gnome.org> +Date: Wed Mar 31 19:49:12 2010 +0200 + + Dutch translation updated by Wouter Bolsterlee + + po/nl.po | 1109 +++++++++++++++++++++++++------------------------------------- + 1 file changed, 444 insertions(+), 665 deletions(-) + +commit 62c8626fd1da1a652e2e4f802d1cfe000d732610 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 29 23:52:53 2010 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 15a2915dad0f88cf4097d062bd0dfd32153c1652 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Mar 29 23:51:21 2010 +0200 + + Update for 2.30.0 + + NEWS | 31 +++++++++++++++++++++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 33 insertions(+), 2 deletions(-) + +commit 8d0ac7f2d3573121ff81a702904b6b6e1521b07d +Author: Jamil Ahmed <itsjamil@gmail.com> +Date: Sun Mar 28 15:38:20 2010 +0600 + + Updated Bengali translation + + po/bn.po | 107 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 53 insertions(+), 54 deletions(-) + +commit 41de56165b6af3c4cde53dd8ddc3bbe0ae6af95e +Author: Kenneth Nielsen <k.nielsen81@gmail.com> +Date: Sun Mar 28 10:52:01 2010 +0200 + + Updated Danish translation + + po/da.po | 20 ++++++++++---------- + 1 file changed, 10 insertions(+), 10 deletions(-) + +commit 0811afe631135a9eb40a7889bf053b51c0bcd261 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Sat Mar 27 16:01:43 2010 +0100 + + Updated Basque language + + po/eu.po | 11 ++++++++--- + 1 file changed, 8 insertions(+), 3 deletions(-) + +commit bba51ad1dda283a90d8bbc47cb01c8d389670efc +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Sat Mar 27 15:38:41 2010 +0100 + + Updated Basque language + + po/eu.po | 23 +++++++++-------------- + 1 file changed, 9 insertions(+), 14 deletions(-) + +commit 0927cc788169cf8a753f279d7dc2e0a6fd164a18 +Author: Jamil Ahmed <itsjamil@gmail.com> +Date: Sat Mar 27 19:45:31 2010 +0600 + + Updated Bengali translation + + po/bn.po | 565 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 297 insertions(+), 268 deletions(-) + +commit c1bbba508a128b2e9b06f6f7467813c54f3f062d +Author: Maxim V. Dziumanenko <dziumanenko@gmail.com> +Date: Fri Mar 26 13:35:23 2010 +0200 + + Updated Ukrainian translation + + po/uk.po | 300 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 140 insertions(+), 160 deletions(-) + +commit 065056f7bf922cef925337721531840b36c3196d +Author: Sweta Kothari <swkothar@redhat.com> +Date: Wed Mar 24 17:32:40 2010 +0530 + + Updated Gujarati Translations + + po/gu.po | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit b7705afb0d677db872d17df87ac2101099528111 +Author: Sweta Kothari <swkothar@redhat.com> +Date: Wed Mar 24 17:20:44 2010 +0530 + + Updated Gujarati Translations + + po/gu.po | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +commit 6cbfd5bcb6ea7f104c51c8f0b945aefb8722fd6e +Author: Gintautas Miliauskas <gintautas@miliauskas.lt> +Date: Tue Mar 23 20:32:46 2010 +0200 + + Updated Lithuanian translation. + + po/lt.po | 613 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 357 insertions(+), 256 deletions(-) + +commit a368826009d3dc4ab347499c02261e7228065ee7 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Mon Mar 22 17:38:01 2010 +0100 + + Updated Basque language + + po/eu.po | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 8b86f7e805a20d59d82e2bc5217fcd330644b062 +Author: Mattias Põldaru <mahfiaz gmail com> +Date: Mon Mar 22 15:57:26 2010 +0200 + + Estonian translation updated + + po/et.po | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +commit 639326a268634b35d05bf692f8e021daa3524ae0 +Author: Gianvito Cavasoli <gianvito@gmx.it> +Date: Fri Mar 19 23:46:59 2010 +0100 + + Updated Italian translation + + po/it.po | 611 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 329 insertions(+), 282 deletions(-) + +commit c35c7592fab25c687fada80c97180dc424bdce0a +Author: Duarte Loreto <happyguy_pt@hotmail.com> +Date: Thu Mar 18 00:27:35 2010 +0000 + + Updated Portuguese translation + + po/pt.po | 665 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 376 insertions(+), 289 deletions(-) + +commit 76157831fc26b4c0d1c4abc9acdc91fcf029a9aa +Author: A S Alam <aalam@users.sf.net> +Date: Mon Mar 15 07:25:01 2010 +0530 + + updating for Punjabi by A S Alam + + po/pa.po | 642 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 386 insertions(+), 256 deletions(-) + +commit 26159767eb5c3a58bbde1844884931bcf8da220b +Author: Kenneth Nielsen <k.nielsen81@gmail.com> +Date: Mon Mar 15 00:10:57 2010 +0100 + + Updated Danish translation + + po/da.po | 623 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 358 insertions(+), 265 deletions(-) + +commit 625824fc09130ffa06cf245329a00c5fb3e0174e +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sun Mar 14 03:32:06 2010 +0900 + + Updated Korean translation + + po/ko.po | 642 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 372 insertions(+), 270 deletions(-) + +commit 6c3c76d6c3a0f097ea0f4fa005d97e98e70a8524 +Author: Daniel Nylander <po@danielnylander.se> +Date: Sat Mar 13 12:30:17 2010 +0100 + + Updated Swedish translation + + po/sv.po | 288 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 150 insertions(+), 138 deletions(-) + +commit daaa858441dbd8295b88713c3ebc8db64056ff8f +Author: Gil Forcada <gforcada@gnome.org> +Date: Wed Mar 10 15:07:46 2010 +0100 + + Updated Catalan translation + + po/ca.po | 651 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 359 insertions(+), 292 deletions(-) + +commit 37f2b2524e586dc4444c28b46861cb70c3be0abd +Author: Tommi Vainikainen <thv@iki.fi> +Date: Wed Mar 10 15:45:58 2010 +0200 + + Updated Finnish translation + + po/fi.po | 698 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 387 insertions(+), 311 deletions(-) + +commit d025360cfe9592459b675f2922a90d50c4ead66e +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Mar 7 20:51:47 2010 +0100 + + Mark EogCloseConfirmationDialog's functions as internal + + src/eog-close-confirmation-dialog.h | 7 +++++++ + 1 file changed, 7 insertions(+) + +commit cef2bbf0efc316b75ce7f4d06f860d07ff087c7f +Author: Miloš Popović <mpopovic@src.gnome.org> +Date: Sun Mar 7 17:12:32 2010 +0100 + + Updated Serbian translations + + po/sr.po | 707 ++++++++++++++++++++++++++++++++++----------------------- + po/sr@latin.po | 707 ++++++++++++++++++++++++++++++++++----------------------- + 2 files changed, 856 insertions(+), 558 deletions(-) + +commit 0f95dbe9387eecdda26379c2bc21f03d9801c5e4 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Sat Mar 6 21:46:41 2010 +0100 + + Updated Hungarian translation + + po/hu.po | 594 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 323 insertions(+), 271 deletions(-) + +commit ec9a39d0ff355dd57a727688cde2bc37e240b6e1 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Sat Mar 6 11:14:14 2010 +0100 + + Updated Basque language + + po/eu.po | 26 ++++++++++++++++---------- + 1 file changed, 16 insertions(+), 10 deletions(-) + +commit 2d7ca03c6cfe212a44e5b2576ee7c9baa6167dcb +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Fri Mar 5 09:08:16 2010 +0100 + + Updated Basque language + + po/eu.po | 598 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 334 insertions(+), 264 deletions(-) + +commit 314329487bdc2c39f0b791508250a97c4f8ee8de +Author: Claude Paroz <claude@2xlibre.net> +Date: Sun Feb 28 22:42:40 2010 +0100 + + Updated French translation + + po/fr.po | 270 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 144 insertions(+), 126 deletions(-) + +commit 0088c6e56a3fdf14f4578dad9720261245cdf16c +Author: Takayuki KUSANO <AE5T-KSN@asahi-net.or.jp> +Date: Sun Feb 28 21:59:51 2010 +0900 + + Updated Japanese translation. + Original update by Hideki Yamane (Debian-JP). + http://l10n.gnome.org/vertimus/eog/master/po/ja + Merged bug report by SUGITA Toshinori. + https://bugzilla.gnome.org/show_bug.cgi?id=611279 + + po/ja.po | 771 +++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 473 insertions(+), 298 deletions(-) + +commit 2e3c931c31993cb51ee35b67cfebd0bf12d127e2 +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Sat Feb 27 14:43:14 2010 +0100 + + Updated Polish translation + + po/pl.po | 634 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 352 insertions(+), 282 deletions(-) + +commit 08b05b059971697e527544637878e3eed03f0804 +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Sat Feb 27 20:23:04 2010 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 13 ++++++------- + po/zh_TW.po | 13 ++++++------- + 2 files changed, 12 insertions(+), 14 deletions(-) + +commit f80cb854f215a2cc59782337fc6bea35b1a384b8 +Author: Liel Fridman <lielft@gmail.com> +Date: Sat Feb 27 00:09:19 2010 +0200 + + Updated Hebrew translation + + po/he.po | 582 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 306 insertions(+), 276 deletions(-) + +commit 965770938bf0681ba4f89a4800756731c43fcdd8 +Author: Thanos Lefteris <alefteris@gmail.com> +Date: Thu Feb 25 00:40:52 2010 +0200 + + Updated Greek translation + + po/el.po | 712 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 425 insertions(+), 287 deletions(-) + +commit 4cbf235122ebed0ba4247a8e8aeec7341efaf859 +Author: Bruce Cowan <bcowan@fastmail.co.uk> +Date: Wed Feb 24 14:05:30 2010 +0000 + + Updated British English translation + + po/en_GB.po | 550 ++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 293 insertions(+), 257 deletions(-) + +commit d4b79c16b4c31a8aab1d52f189a6127b2ee642a4 +Author: Alexander Shopov <ash@contact.bg> +Date: Tue Feb 23 08:59:56 2010 +0200 + + Updated Bulgarian translation + + po/bg.po | 242 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 131 insertions(+), 111 deletions(-) + +commit 84fe63eaffc954d996fba99a6ad4c2a17254d668 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 22 23:36:26 2010 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit ba50484d88a1b791aa1d49507742b2de01483db9 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 22 23:28:02 2010 +0100 + + Prepare for release 2.29.91 + + NEWS | 24 ++++++++++++++++++++++++ + 1 file changed, 24 insertions(+) + +commit b50cd2f99d948bc94fed9d58a21b3a3d25fe1612 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Feb 12 17:41:33 2010 +0100 + + Explicitly link to libX11 + + Explicitly links eog to libX11 if necessary. Should fix linker errors + using non-recursive linkers. Includes fallback for X11 distributions + without pkg-config support. Fixes bug #609184. + + configure.ac | 24 ++++++++++++++++++++++++ + cut-n-paste/totem-screensaver/Makefile.am | 3 +++ + src/Makefile.am | 9 ++++++++- + 3 files changed, 35 insertions(+), 1 deletion(-) + +commit ef29f7cd409e8f0708196c7eef7beff7b6df9dbd +Author: Maciej Piechotka <uzytkownik2@gmail.com> +Date: Mon Feb 22 23:03:26 2010 +0100 + + Fix missing stdlib.h includes + + Fixes build failures and warnings with more strict compiler settings. + See bug#610692. + + src/eog-scroll-view.c | 1 + + src/eog-thumb-view.c | 1 + + 2 files changed, 2 insertions(+) + +commit a331097b8ea87868b6c5c4ad0f7ec064d7dc5035 +Author: Amitakhya Phukan <aphukan@fedoraproject.org> +Date: Mon Feb 22 17:17:24 2010 +0530 + + Updated Assamese translations + + po/as.po | 709 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 368 insertions(+), 341 deletions(-) + +commit 1322905ee44d07312bbd994bb5e344acdb353b13 +Author: Leonid Kanter <leon@asplinux.ru> +Date: Sun Feb 21 17:54:18 2010 +0200 + + Updated Russian translation from Alexander Saprykin + + po/ru.po | 637 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 356 insertions(+), 281 deletions(-) + +commit 3599e0635c415bcff33514e4cf77069eba6bddcc +Author: vasudeven <agnihot3@gmail.com> +Date: Thu Feb 18 08:39:16 2010 +0530 + + updated Tamil translation + + po/ta.po | 329 ++++++++++++++++++++++++++++----------------------------------- + 1 file changed, 144 insertions(+), 185 deletions(-) + +commit 6890308e08c580625f56d6742f9c6dd9478637ef +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Feb 15 22:19:01 2010 +0100 + + Fix typos in API comments + + Spotted by gtk-doc-1.13. + + src/eog-application.c | 4 ++-- + src/eog-print-image-setup.c | 2 +- + src/eog-thumb-view.c | 2 +- + 3 files changed, 4 insertions(+), 4 deletions(-) + +commit 5116d814b7d42d33c88cd211f3e0f308d5bec72f +Author: Vladimir Melo <vmelo@gnome.org> +Date: Sun Feb 14 11:02:51 2010 -0200 + + Updated Brazilian Portuguese translation + + po/pt_BR.po | 213 +++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 116 insertions(+), 97 deletions(-) + +commit 814b952a14400db8c6bead95ae3b9e937efc1b89 +Author: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> +Date: Sat Feb 13 00:08:50 2010 +0200 + + Update Romanian translation + + po/ro.po | 658 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 379 insertions(+), 279 deletions(-) + +commit cc5d36604d5a90b03a7328f6484c4b7d8de9cf54 +Author: Fran Diéguez <frandieguez@ubuntu.com> +Date: Fri Feb 12 10:38:35 2010 +0100 + + Updated Galician Translation + + po/gl.po | 667 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 370 insertions(+), 297 deletions(-) + +commit 64156898d4ee346b6ea0c73f66d266f7cb732461 +Author: Petr Kovar <pknbe@volny.cz> +Date: Thu Feb 11 22:04:16 2010 +0100 + + Update Czech translation by Adrian Gunis + + po/cs.po | 585 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 326 insertions(+), 259 deletions(-) + +commit d4782d40fd43e7ffc3c57588767ad62fbc798ac5 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Thu Feb 11 15:00:39 2010 +0100 + + Updated Slovenian translation + + po/sl.po | 272 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 146 insertions(+), 126 deletions(-) + +commit eab8f052b248faa98b46629d1200d51091badd89 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Wed Feb 10 21:55:31 2010 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 243 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 133 insertions(+), 110 deletions(-) + +commit 01cfc78d6139ffe49ddc6152294139a93c07b271 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Wed Feb 10 07:55:39 2010 +0100 + + Updated Spanish translation + + po/es.po | 32 +++++++++++++++----------------- + 1 file changed, 15 insertions(+), 17 deletions(-) + +commit 2ef52cd26f3fa035150b037161fb6f6666f6e44a +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Wed Feb 10 00:38:35 2010 +0200 + + Updated Arabic translation + + po/ar.po | 249 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 134 insertions(+), 115 deletions(-) + +commit 0b8a7aca612af015fa627a5d1f01b80b2e69623e +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Feb 9 20:34:44 2010 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 260a5440f50173dbad61a3117a8d4f1c77f8c273 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Feb 9 20:27:11 2010 +0100 + + Prepare for release 2.29.90 + + We missed 2.29.6 (Oops!), so version number had to be adjusted. + + NEWS | 32 ++++++++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 33 insertions(+), 1 deletion(-) + +commit 6cebe233786101783ae3e649bc3241e9c490ef22 +Author: Daniel Macks <dmacks@netspace.org> +Date: Mon Feb 8 12:31:07 2010 +0100 + + Explicitly link to GThread + + Should fix linker errors related to GThread on systems that don't + recursively resolve linked libraries like OS X. See bug #609184. + + configure.ac | 1 + + 1 file changed, 1 insertion(+) + +commit 2afc8080568c8778e33c0b42475d5a6864662a83 +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Mon Feb 8 14:07:03 2010 +0700 + + Updated Thai translation. + + po/th.po | 638 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 362 insertions(+), 276 deletions(-) + +commit 7b338b986c612593002a87186f3957202769b54a +Author: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw> +Date: Sun Feb 7 19:57:02 2010 +0800 + + Updated Traditional Chinese translation(Hong Kong and Taiwan) + + po/zh_HK.po | 628 ++++++++++++++++++++++++++++++++---------------------------- + po/zh_TW.po | 628 ++++++++++++++++++++++++++++++++---------------------------- + 2 files changed, 680 insertions(+), 576 deletions(-) + +commit ab7c60cf183dbe5955eb8f966294cf32a9adda19 +Author: Ivar Smolin <okul@linux.ee> +Date: Sun Feb 7 12:13:30 2010 +0200 + + Updating Estonian translation + + po/et.po | 20 ++++++++++++++++++-- + 1 file changed, 18 insertions(+), 2 deletions(-) + +commit 8470c2f8232be89a76141047a20a41833d4c8068 +Author: Lucas Rocha <lucasr@gnome.org> +Date: Sat Feb 6 13:01:46 2010 +0000 + + [window] Update about dialog with new maintainers + + src/eog-window.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 0c7fa22735fc0137d416e39eece9676e2dde38db +Author: Lucas Rocha <lucasr@gnome.org> +Date: Sat Feb 6 12:51:18 2010 +0000 + + MAINTAINERS: maintainers are now Claudio and Felix + + Thanks for all the good work guys! + + MAINTAINERS | 10 +++++++--- + 1 file changed, 7 insertions(+), 3 deletions(-) + +commit 444e57447fd1c7e5d738950743f547cb41c65a90 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Fri Feb 5 20:18:55 2010 +0100 + + Updated Spanish translation + + po/es.po | 321 ++++++++++++++++++++++++++++----------------------------------- + 1 file changed, 141 insertions(+), 180 deletions(-) + +commit 19e1f0dde875863c819ecd8eec3d7c46e559a6d7 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Feb 5 18:39:27 2010 +0100 + + Updated German translation + + po/de.po | 241 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 132 insertions(+), 109 deletions(-) + +commit f2de185ed25c03d2bf1f60d7311448b26f7ee027 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Feb 5 16:06:11 2010 +0100 + + Cleanup random image patch + + This adds a mnemonic to the random image menu entry and actually makes + it visible in the application. It also removes the short label of the + action as it can't be used in the toolbar for now anyway since we don't + have a fitting icon. + + data/eog-ui.xml | 2 ++ + src/eog-window.c | 7 ++----- + 2 files changed, 4 insertions(+), 5 deletions(-) + +commit 9221716bc34aa8cf78293b89160920260018fe48 +Author: Quinten Lansu <knight666@gmail.com> +Date: Fri Feb 5 15:54:05 2010 +0100 + + Make it possible to select a random image from the collection + + This allows the user to crawl randomly through his collection. + Patch posted to eog-list: + http://mail.gnome.org/archives/eog-list/2009-December/msg00003.html + + src/eog-thumb-view.c | 9 +++++++++ + src/eog-thumb-view.h | 3 ++- + src/eog-window.c | 21 +++++++++++++++++++++ + 3 files changed, 32 insertions(+), 1 deletion(-) + +commit f71a40269ae3b3ec3400e4d5352c064a6a7ffed5 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Feb 5 15:29:17 2010 +0100 + + Ask before showing Appearance capplet after setting wallpaper + + This displays an info bar asking if the user actually wants to edit the + style of his wallpaper. The info bar is hidden either by answering it or + by selecting the next image. Confirming the question still opens the + Appearance capplet as before. Fixes bug #606935. + + src/eog-window.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++----- + 1 file changed, 62 insertions(+), 6 deletions(-) + +commit 20400bfe00c20e4efb1b18eef714007b376b27f1 +Author: Felix Riemann <friemann@gnome.org> +Date: Thu Feb 4 19:19:15 2010 +0100 + + Sync screensaver code with latest upstream + + Import latest screensaver inhibitor code from Totem's trunk. + Keep our local modifications mostly alive for now. + + cut-n-paste/totem-screensaver/totem-scrsaver.c | 91 ++++++++++++++++++-------- + cut-n-paste/totem-screensaver/totem-scrsaver.h | 6 +- + 2 files changed, 67 insertions(+), 30 deletions(-) + +commit 1ec9b08149e7dce8fed82c67542fda2446809a29 +Author: Michel Recondo <michel@recondo.com.br> +Date: Thu Feb 4 10:33:14 2010 -0300 + + Updated Brazilian Portuguese Translation + + po/pt_BR.po | 588 +++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 319 insertions(+), 269 deletions(-) + +commit b6aa6dd2209b09850a03bde1765e059b432eb6ed +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 29 21:37:54 2010 +0100 + + Make EogWindow GSEAL-compatible as far as possible + + There are some GTK_WIDGET_REALIZED calls left for which there's no + replacement yet in GTK+. + + src/eog-window.c | 32 +++++++++++++++++++------------- + 1 file changed, 19 insertions(+), 13 deletions(-) + +commit d7a07bd0985e9540f869ebdfc6b4a950828c1df4 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 29 21:15:14 2010 +0100 + + Make EogPluginManager GSEAL-compatible + + src/eog-plugin-manager.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +commit b5cacd8f5c843053b204064eba9ab6a828490b00 +Author: Alexander Shopov <ash@contact.bg> +Date: Thu Jan 28 09:06:47 2010 +0200 + + Updated Bulgarian translation + + po/bg.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 3a415fd073421c26a5e49b36d7cb6d10c54bdfbf +Author: Krasimir Chonov <mk2616@abv.bg> +Date: Thu Jan 28 09:00:52 2010 +0200 + + Updated Bulgarian translation + + po/bg.po | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +commit 5daf0a0939c9d7ce4d7f3e1ad5e2e35cbdeec458 +Author: Krasimir Chonov <mk2616@abv.bg> +Date: Thu Jan 28 09:00:52 2010 +0200 + + Updated Bulgarian translation + + po/bg.po | 538 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 287 insertions(+), 251 deletions(-) + +commit 41d7aa05eb230a9019ea252a29b1d6f526358288 +Author: Ivar Smolin <okul@linux.ee> +Date: Wed Jan 27 18:23:45 2010 +0200 + + Updating Estonian translation + + po/et.po | 238 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 126 insertions(+), 112 deletions(-) + +commit 0bd003034f58093eff92037a78fd484005110301 +Author: Jamil Ahmed <itsjamil@gmail.com> +Date: Wed Jan 27 20:05:41 2010 +0600 + + Updated Bengali translation + + po/bn.po | 876 ++++++++++++++++----------------------------------------------- + 1 file changed, 220 insertions(+), 656 deletions(-) + +commit 456b121b4f75889ec58f70a72d8b18908a76d4e8 +Author: Sweta Kothari <swkothar@redhat.com> +Date: Mon Jan 25 15:13:41 2010 +0530 + + Updated Gujarati Translations + + po/gu.po | 302 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 161 insertions(+), 141 deletions(-) + +commit 405a7483a5073c730c32678ae58b8900fce5e0e0 +Author: Aron Xu <aronxu@gnome.org> +Date: Sun Jan 24 15:33:10 2010 +0800 + + Update Simplified Chinese translation. + + po/zh_CN.po | 579 +++++++++++++++++++++++++++++------------------------------- + 1 file changed, 282 insertions(+), 297 deletions(-) + +commit a81e4600e1d64609d5afd754ad4cb27097271b64 +Author: vasudeven <agnihot3@gmail.com> +Date: Sun Jan 24 09:38:13 2010 +0530 + + updated Tamil translation + + po/ta.po | 600 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 354 insertions(+), 246 deletions(-) + +commit 04dbab668c78e251fe66f112d63ab68a9ed4694a +Author: Jamil Ahmed <itsjamil@gmail.com> +Date: Fri Jan 22 02:42:56 2010 +0600 + + Updated Bengali translation + + po/bn.po | 2379 +++++++++++++++++++++++++++++++++++++++++++++++--------------- + 1 file changed, 1798 insertions(+), 581 deletions(-) + +commit f46f50c88f6cff3b46643bd33eea3807c2c0c819 +Author: Christian.Kirbach <Christian.Kirbach@googlemail.com> +Date: Wed Jan 20 13:52:33 2010 +0100 + + Updated German translation + + po/de.po | 594 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 324 insertions(+), 270 deletions(-) + +commit 5d2fa608fc2ba92d4f12dab69d754c7d3ff969c0 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Tue Jan 19 14:15:31 2010 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 22 +++++++++------------- + 1 file changed, 9 insertions(+), 13 deletions(-) + +commit 35e354e9530e1915c0bca0653af378788c2369a7 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Jan 17 13:58:55 2010 +0100 + + Make EogCloseConfirmationDialog GSEAL-compatible + + src/eog-close-confirmation-dialog.c | 23 +++++++++++------------ + 1 file changed, 11 insertions(+), 12 deletions(-) + +commit 1fb61f05ff2a59e3bb579b8731c263c4308ca722 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Fri Jan 15 19:29:03 2010 +0100 + + Updated Slovenian translation + + po/sl.po | 624 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 316 insertions(+), 308 deletions(-) + +commit ac6f518e1870af98dc47389d695f7773debe3dda +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 13 22:15:14 2010 +0100 + + Make EogPrintPreview GSEAL-compatible + + src/eog-print-preview.c | 50 ++++++++++++++++++++++++------------------------- + 1 file changed, 24 insertions(+), 26 deletions(-) + +commit f0837c4a76e5c95a140776e4421b3e094c306024 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Jan 13 19:53:48 2010 +0100 + + Make EogSidebar GSEAL-compatible + + src/eog-sidebar.c | 13 ++++++++----- + 1 file changed, 8 insertions(+), 5 deletions(-) + +commit 327f1b3c20e46bce6dfdb2a4b7f6a8daf7191593 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Wed Jan 13 19:10:14 2010 +0100 + + Updated Norwegian bokmål translation + + po/nb.po | 46 +++++++++++++++++----------------------------- + 1 file changed, 17 insertions(+), 29 deletions(-) + +commit 574cd7d56ce64f49e0904fde5cfe2e9a9795e99a +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Tue Jan 12 16:03:56 2010 +0200 + + Updated Arabic translation + + po/ar.po | 541 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 278 insertions(+), 263 deletions(-) + +commit 59a9cf3289fcd5fe84091ddf841de344ded340bd +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 11 23:40:44 2010 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 805e461b8874006a221890847ab79d38c41d28bf +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Jan 11 23:37:25 2010 +0100 + + Prepare for release 2.29.5 + + NEWS | 30 ++++++++++++++++++++++++++++++ + configure.ac | 2 +- + 2 files changed, 31 insertions(+), 1 deletion(-) + +commit 15cc51ef3ab524025611e7e4dcfee78450efad6d +Author: Maxim V. Dziumanenko <dziumanenko@gmail.com> +Date: Sun Jan 10 16:09:02 2010 +0200 + + Update Ukrainian translation + + help/uk/uk.po | 214 ++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 109 insertions(+), 105 deletions(-) + +commit e9ab49afe4efe94e54b8302136f92226fa4db6c1 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jan 9 23:49:58 2010 +0100 + + Improve compatibility with GSEALed GtkWidget + + First steps to GSEAL-compatibility of eog's "core". + Handles some GtkWidget-related seals. + + src/eog-error-message-area.c | 4 ++-- + src/eog-plugin-manager.c | 5 ++-- + src/eog-print-preview.c | 18 ++++++++------- + src/eog-properties-dialog.c | 10 ++++---- + src/eog-scroll-view.c | 55 ++++++++++++++++++++++---------------------- + src/eog-sidebar.c | 4 ++-- + src/eog-window.c | 29 ++++++++++++----------- + 7 files changed, 65 insertions(+), 60 deletions(-) + +commit 9533661e753a77e19716ae7a791ef66739cb08ed +Author: Daniel Nylander <po@danielnylander.se> +Date: Sat Jan 9 17:58:44 2010 +0100 + + Updated Swedish translation + + po/sv.po | 606 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 326 insertions(+), 280 deletions(-) + +commit 8cc898563d13b185f60c4d2c36eedfa7aff55307 +Author: Felix Riemann <friemann@gnome.org> +Date: Sat Jan 9 00:11:53 2010 +0100 + + Fix critical warning + + We called eog_is_animation() in a location where it was possible the + passed image wasn't set. + + src/eog-scroll-view.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 238a42350bd066686aee46f72a3017862b493d2f +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 8 22:24:34 2010 +0100 + + Remove EogMessageArea from the API docs + + doc/reference/eog-docs.sgml.in | 1 - + doc/reference/eog-sections.txt | 24 ------------------------ + 2 files changed, 25 deletions(-) + +commit b0c6f3dfb537a8f855c268f91a788eaf5ce7bdba +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 8 22:21:23 2010 +0100 + + Remove now unneeded EogMessageArea widget + + bindings/python/eog.defs | 112 -------- + bindings/python/eog.override | 1 - + src/Makefile.am | 2 - + src/eog-error-message-area.c | 1 - + src/eog-message-area.c | 636 ------------------------------------------- + src/eog-message-area.h | 99 ------- + src/eog-window.c | 3 +- + 7 files changed, 1 insertion(+), 853 deletions(-) + +commit cdcf54b123c3f2ac9274dfe9cd0559909b42b320 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Jan 8 22:06:56 2010 +0100 + + Use GtkInfoBar instead of our custom message area widget + + GTK+ ships with the GtkInfoBar message area widget since version 2.18. + Use that instead of our own copy of gedit's widget which was also the + base for GtkInfoBar. + + src/eog-error-message-area.c | 24 +++++++++++++----------- + src/eog-window.c | 4 ++-- + 2 files changed, 15 insertions(+), 13 deletions(-) + +commit 8024648adaa4cf059e023909731e82838385abba +Author: Claude Paroz <claude@2xlibre.net> +Date: Thu Jan 7 22:35:24 2010 +0100 + + Updated French translation + + Contributed by Laurent Coudeur and Claude Paroz + + po/fr.po | 553 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 290 insertions(+), 263 deletions(-) + +commit be03516a57f0456636223e1b42af0969e0913a19 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Wed Jan 6 16:00:32 2010 +0100 + + Updated Spanish translation + + po/es.po | 585 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 328 insertions(+), 257 deletions(-) + +commit b9f70011788a7394df8b5503357bd65377119912 +Author: Maxim V. Dziumanenko <dziumanenko@gmail.com> +Date: Tue Jan 5 18:15:34 2010 +0200 + + Update Ukrainian translation + + po/uk.po | 601 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 339 insertions(+), 262 deletions(-) + +commit a15dd42053d5ef43495da747321ddbebd080d2fd +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Tue Jan 5 16:09:20 2010 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 479 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 243 insertions(+), 236 deletions(-) + +commit 36f6627b43776776b199a109ab982996b8d12905 +Author: Philip Withnall <philip@tecnocode.co.uk> +Date: Fri Jan 1 14:02:35 2010 +0000 + + Remove Pango markup from translatable strings where possible + + Use GtkBuilder attributes on labels instead. Fixes bug #605852. + + data/eog-image-properties-dialog.ui | 120 ++++++++++++++++++++++++------------ + data/eog-multiple-save-as-dialog.ui | 30 ++++++--- + data/eog-preferences-dialog.ui | 24 +++++--- + 3 files changed, 118 insertions(+), 56 deletions(-) + +commit 7dd5435f7640a9bdeced67f4a6f66c90327eb18a +Author: Philip Withnall <philip@tecnocode.co.uk> +Date: Fri Jan 1 13:54:30 2010 +0000 + + Miscellaneous string fixes + + Various string fixes, including capitalisation, punctuation and terminology + fixes. Proper Unicode ellipsis characters have been introduced, as well as + proper multiplication symbols. Fixes bug #605851. + + data/eog.schemas.in | 29 ++++++++++++++--------------- + src/eog-print-image-setup.c | 2 +- + src/eog-window.c | 16 ++++++++-------- + src/main.c | 4 ++-- + 4 files changed, 25 insertions(+), 26 deletions(-) + +commit ae756b809595a96bf687436a0e2aa3a754d856bf +Author: Philip Withnall <philip@tecnocode.co.uk> +Date: Fri Jan 1 13:47:26 2010 +0000 + + Updated British English translation + + po/en_GB.po | 349 +++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 204 insertions(+), 145 deletions(-) + +commit 34fec6b71cead8ab09ca2ebc4d16d79acbbcc803 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Dec 30 19:55:02 2009 +0100 + + Reuse the last path used for Save As in the single-file Save As dialog + + If the path that was last used for Save As is still existing reuse it + the next time. If it's not or it's the first Save As operation of the + session the old behaviour (using the source path) is applied. + Fixes bug #604230. + + src/eog-window.c | 32 ++++++++++++++++++++++++++------ + 1 file changed, 26 insertions(+), 6 deletions(-) + +commit 7f76e382a911f71a8e834f2c4bf74570b8ca9c9a +Author: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> +Date: Thu Dec 24 12:50:00 2009 +0700 + + po/vi.po: Updated Vietnamese translation + + po/vi.po | 545 +++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 341 insertions(+), 204 deletions(-) + +commit acae4185ff648807f0f4a638eaf057d389f75130 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Wed Dec 16 12:22:04 2009 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 16 ++++++++++------ + 1 file changed, 10 insertions(+), 6 deletions(-) + +commit 3e31c95abb26cd780aacc3c296a95023b05824c8 +Author: Nils-Christoph Fiedler <fiedler@medienkompanie.de> +Date: Mon Dec 14 01:44:12 2009 +0100 + + Updated LowGerman translation + + po/nds.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 8d0bae91544599515da8222d4ddd92732eb05085 +Author: Nils-Christoph Fiedler <fiedler@medienkompanie.de> +Date: Mon Dec 14 01:35:35 2009 +0100 + + Added LowGerman translation + + po/LINGUAS | 1 + + 1 file changed, 1 insertion(+) + +commit 802d7e5d8f8c94d3f60afe1428eea237d4ff1748 +Author: Nils-Christoph Fiedler <fiedler@medienkompanie.de> +Date: Mon Dec 14 01:35:28 2009 +0100 + + Added LowGerman translation + + po/nds.po | 1343 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 1343 insertions(+) + +commit f4766644dd558a1c5c6a149226a4ab3d4c81796b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Dec 13 11:53:01 2009 +0100 + + Fix compiler warning + + src/eog-close-confirmation-dialog.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 3793023b1bb6ec41890f7c84c488370cc1a1c655 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Tue Dec 8 17:58:05 2009 +0100 + + Updated Spanish translation, fixed typo + + po/es.po | 8 +++----- + 1 file changed, 3 insertions(+), 5 deletions(-) + +commit 96f98ee67b782e907cbdf1917bf76568edf5182e +Author: Yair Hershkovitz <yairhr@gmail.com> +Date: Sun Dec 6 08:52:03 2009 +0200 + + Updated Hebrew translation + + po/he.po | 352 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 204 insertions(+), 148 deletions(-) + +commit 996fd335c7c4450216658afa6f9bc02cdaebfc5c +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Fri Dec 4 21:50:37 2009 +0100 + + Updated Norwegian bokmål translation. + + po/nb.po | 278 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 147 insertions(+), 131 deletions(-) + +commit 453ec626bb9af69482c3cf9c3ac8668764a72016 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 1 13:48:40 2009 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 3f8d698bebc1899cc61fd232044a41b2051977a9 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 1 13:42:38 2009 +0100 + + Update for 2.29.3 + + NEWS | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +commit a84ad69aac7ac4c9274037bfc8968c455590dfd4 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Dec 1 13:26:23 2009 +0100 + + Avoid warnings in CloseConfirmDlg when thumbs are not loaded + + This is merely a workaround until we find the real fix. This avoids the + warnings when some thumbnails of changed images are not loaded (e.g. + because the collection is hidden). Instead a generic icon is shown. + + src/eog-close-confirmation-dialog.c | 46 +++++++++++++++++++++++++++++++++---- + 1 file changed, 41 insertions(+), 5 deletions(-) + +commit 74268d4bac49d5c15268c9375f8b853e5b860df6 +Author: Tao Wei <weitao1979@gmail.com> +Date: Mon Nov 30 16:42:24 2009 +0800 + + Updated Simplified Chinese translation. + + po/zh_CN.po | 250 ++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 127 insertions(+), 123 deletions(-) + +commit 8cbf69edca2c35c7ac81f150b6cb2c9653498cd2 +Author: Felix Riemann <friemann@gnome.org> +Date: Fri Nov 27 21:33:23 2009 +0100 + + Remove unneeded variable + + The variable 'next_state' was a lost carry-on from the JPEG reader, + which was the base for the PNG reader. It was never used here and was + even faulty in one case. + + 'chunk_len' was likely used during initial development of the PNG reader + but was never in the final version. + + src/eog-metadata-reader-png.c | 10 ++-------- + 1 file changed, 2 insertions(+), 8 deletions(-) + +commit 17d4f73537c4b3792b693cc643c50b0fd7544510 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Thu Nov 26 07:49:32 2009 +0200 + + Updated Arabic translation + + po/ar.po | 263 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 150 insertions(+), 113 deletions(-) + +commit 659403e321ef02fca024342773042c96300a16d6 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Nov 22 12:32:59 2009 +0100 + + Raise gtk+ dependency to 2.17.5 + + This version is needed for commit d6b1a635 due to the accessor to the + activatable property of the ToggleCellRenderer. + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit d6b1a6351ccb2e87ecdbfb071120247bfc79b79b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Nov 22 12:23:51 2009 +0100 + + Add func to get the close confirmation dialog in an insensitive state + + This state is special therein that it is not making the whole dialog + insensitive, but only the buttons and the checkbox column in the + treeview. That way the main window doesn't need to be made insensitive + during saving to avoid interaction. Alltogether this should improve the + situation visually quite a bit. + + src/eog-close-confirmation-dialog.c | 18 +++++++++++++++++- + src/eog-close-confirmation-dialog.h | 1 + + src/eog-window.c | 3 +-- + 3 files changed, 19 insertions(+), 3 deletions(-) + +commit aca371d4aafafc3290a770a29516bbf95f9c256e +Author: Ivar Smolin <okul@linux.ee> +Date: Sun Nov 22 12:17:14 2009 +0200 + + Updating Estonian translation + + po/et.po | 33 +++++++++++++++++++++++++++++++-- + 1 file changed, 31 insertions(+), 2 deletions(-) + +commit 206d79cd0d8c0dabc907dd9e1c3aab39e6a3ab13 +Author: Aron Xu <aronxu@gnome.org> +Date: Sat Nov 21 20:50:26 2009 +0800 + + Correct a typo + + po/zh_CN.po | 457 ++++++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 291 insertions(+), 166 deletions(-) + +commit 71b38a132362e79581a86aa68d8d0d1ce7492411 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Nov 17 21:36:43 2009 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 51226113da011a49faa56516c4ea95cddd0a533d +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Nov 17 21:26:21 2009 +0100 + + Update for release 2.29.2 + + NEWS | 21 ++++++++++++++++++++- + 1 file changed, 20 insertions(+), 1 deletion(-) + +commit 478928adeb7b49506cac094014ffdd6d1b119324 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Tue Nov 17 08:28:03 2009 +0100 + + Updated Slovenian translation + + po/sl.po | 335 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 185 insertions(+), 150 deletions(-) + +commit 2acd79bddaf91bf39b01a80821dc7ee1c64dcb49 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sun Nov 15 23:03:07 2009 +0100 + + Updated Spanish translation + + po/es.po | 264 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 152 insertions(+), 112 deletions(-) + +commit 295675deeaf0506c38190e9d4e8f95ece9cf0f8f +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Nov 15 21:18:11 2009 +0100 + + Keep the dialog alive during saving to lock the main window + + Make both window and dialog insensitive to avoid any further change to + the images during longer save operations. + + src/eog-window.c | 9 +++++---- + 1 file changed, 5 insertions(+), 4 deletions(-) + +commit 90f583ced89d53c851edd29acf6316c96fb8d660 +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Nov 15 21:03:44 2009 +0100 + + Reword save confirm dialog and hook it into intltool + + Makes the secondary labels sound a bit less dramatic. + + po/POTFILES.in | 1 + + src/eog-close-confirmation-dialog.c | 5 ++--- + 2 files changed, 3 insertions(+), 3 deletions(-) + +commit b53f8c99ea0a3265e746a0711449dd8b2720170b +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Nov 15 20:52:39 2009 +0100 + + Update copyright year in the save conirmation dialog sources + + src/eog-close-confirmation-dialog.c | 2 +- + src/eog-close-confirmation-dialog.h | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +commit c7e758832bc1db897c01cce32e04735c01b879ae +Author: Marcus Carlson <marcus@mejlamej.nu> +Date: Sun Nov 15 20:50:11 2009 +0100 + + Add dialog asking wheter to save changes on exit + + The dialog used is based on the one used by gedit. It allows to + decide for every changed image. Fixes bgo#322243. + + src/Makefile.am | 2 + + src/eog-close-confirmation-dialog.c | 648 ++++++++++++++++++++++++++++++++++++ + src/eog-close-confirmation-dialog.h | 71 ++++ + src/eog-window.c | 152 ++++++++- + 4 files changed, 863 insertions(+), 10 deletions(-) + +commit 62f1a9c1a05208cf28f9c26f248d15883e6dc8fd +Author: Sebastien Bacher <seb128@ubuntu.com> +Date: Sun Nov 15 20:20:49 2009 +0100 + + Don't use LOCALMODLIBS in configure + + LOCALMODLIBS is supposed to be used only when linking the interpreter. + Fixes build problems with certain python configs and bgo#600893. + + configure.ac | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +commit 380767cac05ec7c994621c7a7441bd942aa1eb55 +Author: Antón Méixome <meixome@mancomun.org> +Date: Fri Nov 13 11:23:54 2009 +0100 + + Updated Galician Translation + + po/gl.po | 296 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 159 insertions(+), 137 deletions(-) + +commit a107a3666666be4763fdf79f513260b158dd6f2b +Author: Thomas Thurman <tthurman@Dorothy.plexq.com> +Date: Sun Nov 8 12:02:13 2009 +0000 + + Shavian translation + + po/LINGUAS | 1 + + po/en@shaw.po | 1192 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1193 insertions(+) + +commit b8efaa708248e7e8f20043078765564cb35053bb +Author: Alexander Shopov <ash@contact.bg> +Date: Sat Nov 7 10:11:05 2009 +0200 + + Updated Bulgarian translation + + po/bg.po | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +commit 2bb4170beeeba0bd50b9bac1d66ef70f29236ac2 +Author: Alexander Shopov <ash@contact.bg> +Date: Sat Nov 7 10:06:56 2009 +0200 + + Updated Bulgarian translation + + po/bg.po | 256 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 139 insertions(+), 117 deletions(-) + +commit 4f4e3ffa04e2c48d2f3786bf2d908a6db56aae82 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Oct 27 22:54:55 2009 +0100 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 47dc25cc1dc5f567f5fb3e6829edead9ea9ef978 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Oct 27 23:49:45 2009 +0100 + + Prepare for Release 2.29.1 + + NEWS | 39 +++++++++++++++++++++++++++++++++++++++ + 1 file changed, 39 insertions(+) + +commit f8e7122d306020a1d6eaa21fd13aa684c3ddb173 +Author: drtvasudevan <agnihot3@gmail.com> +Date: Tue Oct 27 13:17:29 2009 +0530 + + Updated Tamil translation + + po/ta.po | 332 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 174 insertions(+), 158 deletions(-) + +commit 24f960d26cdfc4b69f690eba3cd02dd69bc46bf8 +Author: drtvasudevan <agnihot3@gmail.com> +Date: Tue Oct 27 13:15:38 2009 +0530 + + Updated Tamil translation + + po/ta.po | 28 +++++++++++++++++++--------- + 1 file changed, 19 insertions(+), 9 deletions(-) + +commit 230e7f1d9181de5296a396d52d9a41b67baffe4f +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Oct 25 20:21:29 2009 +0100 + + Update git.mk + + git.mk | 174 ++++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 90 insertions(+), 84 deletions(-) + +commit 53d23233729079bf5e9c00eb9b50d173ab81fb9e +Author: Raoul Berger <contact@raoulito.info> +Date: Thu Oct 22 19:16:46 2009 +0200 + + Fix mem leak when rotating animations + + src/eog-scroll-view.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +commit 8871921af177bc83bd65cc3e8d8a84bada52576e +Author: Petr Kovar <pknbe@volny.cz> +Date: Mon Oct 19 15:08:31 2009 +0200 + + Updated Czech translation by Adrian Gunis + + Reviewed by: Petr Kovar. + + po/cs.po | 266 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 145 insertions(+), 121 deletions(-) + +commit f7cc7ba9c2eb2d12c96ef3a509519e4fc00bdc4f +Author: Felix Riemann <friemann@gnome.org> +Date: Sun Oct 18 17:44:24 2009 +0200 + + Prepare development branch + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit a8133caa982f783c615eec8c8aa7eb6b0e5a9a95 +Author: Raoul Berger <contact@raoulito.info> +Date: Sun Oct 18 17:31:12 2009 +0200 + + Add support for animated images + + Plays animated images in eog as supported by GdkPixbufAnimation. + Fixes bgo#335093. + + src/eog-image-private.h | 3 ++ + src/eog-image.c | 139 +++++++++++++++++++++++++++++++++++++++++++++++- + src/eog-image.h | 7 +++ + src/eog-scroll-view.c | 31 ++++++++++- + 4 files changed, 177 insertions(+), 3 deletions(-) + +commit 10d243bb8e6f5d0ea4e8005b49851498153efe4d +Author: A S Alam <aalam@users.sf.net> +Date: Thu Oct 15 13:14:34 2009 +0530 + + Complete Translation for Punjabi + + po/pa.po | 281 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 149 insertions(+), 132 deletions(-) + +commit 376ffe828bc48df79a41ac6dc97dc44d5741e270 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Tue Oct 13 14:56:55 2009 +0200 + + Updated Slovenian translation + + po/sl.po | 272 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 150 insertions(+), 122 deletions(-) + +commit 7cc64dad66df4b71c0bf162db05b14894598dc7d +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Tue Oct 13 02:35:05 2009 +0200 + + Small update + + po/hu.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 011d68548f93cfe2fcf20c51075d4d5f71389472 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 12 16:23:00 2009 +0200 + + Set sensitivity for Save and Undo on image load + + They were disabled before which made it impossible to do changes to an + image, switch to another, switch back and try to save/undo the changes. + Respect lockdown settings for Save. + + src/eog-window.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +commit bab906c52f31e96e4b7311cd04fd8e92299a8791 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Oct 12 16:08:27 2009 +0200 + + Fix arrow key behavior without collection in RTL locales + + Left/Right arrows are simply mapped to Up/Down. This makes sure this + mapping gets inverted in RTL locales. Fixes bgo#566104. + + src/eog-window.c | 20 ++++++++++++++++++-- + 1 file changed, 18 insertions(+), 2 deletions(-) + +commit c790e8f6a65d4854ecbd0a2b2c05036c78792b26 +Author: Luca Ferretti <elle.uca@libero.it> +Date: Mon Oct 12 09:13:57 2009 +0200 + + Fix previous commit + + po/it.po | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 646f59bff50231fce27a365cc8bb7524a25f60dd +Author: Luca Ferretti <elle.uca@libero.it> +Date: Mon Oct 12 09:10:32 2009 +0200 + + Updated Italian translation + + po/it.po | 250 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 139 insertions(+), 111 deletions(-) + +commit 089402401b9c8f6123c58f019fb3564aea81e444 +Author: Leonid Kanter <leon@asplinux.ru> +Date: Sun Oct 11 14:49:52 2009 +0300 + + Updated Russian translation + + po/ru.po | 562 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 331 insertions(+), 231 deletions(-) + +commit e180037074fb74143b767282afaee256baa52f78 +Author: Kjartan Maraas <kmaraas@gnome.org> +Date: Sun Oct 11 12:46:43 2009 +0200 + + Updated Norwegian bokmål translation. + + po/nb.po | 319 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 169 insertions(+), 150 deletions(-) + +commit 4d37adc13e3ebe010f86ae9a31f59b5ad967d260 +Author: Christian Kirbach <Christian.Kirbach@googlemail.com> +Date: Sun Oct 11 00:04:30 2009 +0200 + + Updated German translation + + po/de.po | 260 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 143 insertions(+), 117 deletions(-) + +commit e941e58e6d4c4f1f34f1bb4bb3ff263ff3d41ae2 +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Sat Oct 10 21:58:37 2009 +0200 + + Updated Hungarian translation + + po/hu.po | 261 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 142 insertions(+), 119 deletions(-) + +commit bd249b2ec8dab2355a6d34fe13108bb19fefa63e +Author: Ivar Smolin <okul@linux.ee> +Date: Sat Oct 10 16:08:45 2009 +0300 + + Updating Estonian translation + + po/et.po | 60 +++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 33 insertions(+), 27 deletions(-) + +commit 2667d9e607102f762294e3c2b2dd1382ae53fe64 +Author: Wancharle Sebastião Quirino <wancharle@gmail.com> +Date: Sat Oct 10 08:25:08 2009 -0300 + + Updated the Brazilian Portuguese translation. + + po/pt_BR.po | 264 +++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 144 insertions(+), 120 deletions(-) + +commit cc032f145727c4182e24ac4f2de3c3f1299e7ac8 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Sat Oct 10 12:47:01 2009 +0200 + + Minor Arabic fix + + help/ar/figures/eog_save_as_window.png | Bin 35751 -> 35692 bytes + po/ar.po | 8 ++++---- + 2 files changed, 4 insertions(+), 4 deletions(-) + +commit 38f7d373e90b9d062050a8a6446230dd1e5ee7d8 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Sat Oct 10 12:35:26 2009 +0200 + + Updated Arabic translation + + help/ar/ar.po | 1196 +++++++++++++++++++------ + help/ar/figures/eog_save_as_window.png | Bin 28773 -> 35751 bytes + help/ar/figures/eog_start_window.png | Bin 18496 -> 16121 bytes + help/ar/figures/eog_toolbar_editor_window.png | Bin 25066 -> 31158 bytes + 4 files changed, 925 insertions(+), 271 deletions(-) + +commit aa32c3254014cb060dff9fe10dbdd32417914d26 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Sat Oct 10 11:59:12 2009 +0200 + + Updated Arabic translation + + po/ar.po | 22 ++++++++++++++-------- + 1 file changed, 14 insertions(+), 8 deletions(-) + +commit 2e1c0143565812264250e62ed4e38c368cf028f7 +Author: Jorge González <jorgegonz@svn.gnome.org> +Date: Sat Oct 10 10:54:24 2009 +0200 + + Updated Spanish translation + + po/es.po | 323 +++++++++++++++++++++++++++++++++------------------------------ + 1 file changed, 171 insertions(+), 152 deletions(-) + +commit 4491cf5d64374e41ded5fdeef5593b3122c7704b +Author: Gil Forcada <gforcada@gnome.org> +Date: Sat Oct 10 00:05:54 2009 +0200 + + Minor fix to Catalan translation + + po/ca.po | 244 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 133 insertions(+), 111 deletions(-) + +commit 45512b79af27089db2d6d8b3a3356cf614be1c8a +Author: Claude Paroz <claude@2xlibre.net> +Date: Fri Oct 9 19:42:22 2009 +0200 + + Updated French translation + + po/fr.po | 259 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 142 insertions(+), 117 deletions(-) + +commit 5c0a4f8192e17bcd64853162dc1335a1dc4b5f48 +Author: Daniel Nylander <po@danielnylander.se> +Date: Fri Oct 9 19:13:36 2009 +0200 + + Updated Swedish translation + + po/sv.po | 342 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 175 insertions(+), 167 deletions(-) + +commit b9b42eeab629a05c3e162eb8f2caca7b2830ae6b +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Fri Oct 9 17:21:22 2009 +0200 + + Updated Arabic translation + + po/ar.po | 269 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 149 insertions(+), 120 deletions(-) + +commit f3902a4159d04bcb2f80203507178e7b01970575 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Fri Oct 9 19:06:28 2009 +0200 + + Make statusbar strings translatable + + Fixes #597059. Makes statusbar message and image counter translatable. + + src/eog-statusbar.c | 12 +++++++++++- + src/eog-window.c | 19 ++++++++++++------- + 2 files changed, 23 insertions(+), 8 deletions(-) + +commit ec87c9b2919995503122b966c900de8156d10e32 +Author: Josh Lee <jleedev@gmail.com> +Date: Thu Oct 8 13:28:45 2009 +0200 + + Fix slideshow display with invalid timer values + + Timer values smaller than 1 (only settable by hand in GConf) should stop + the automatic image switching. This fixes broken image view in those + cases. Fixes bgo#597754. + + src/eog-window.c | 3 +++ + 1 file changed, 3 insertions(+) + +commit 00ff0cf6c523dac1cbb5ec869c78ef0f598a008a +Author: Denis ARNAUD <darnaud@src.gnome.org> +Date: Mon Oct 5 06:19:53 2009 +0200 + + Updated breton translation + + po/br.po | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit 90295b612ef85dfca4f94a20efe4c48efccf530e +Author: Joan Duran <jodufi@gmail.com> +Date: Fri Oct 2 00:28:13 2009 +0200 + + Updated Catalan translation + + po/ca.po | 425 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 250 insertions(+), 175 deletions(-) + +commit 18da0a94d357d12d5b6e80669bf39dfbfb51f07f +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Sep 22 23:00:29 2009 +0200 + + Pre-init conditionally used pointers on stack + + This is to avoid problems (eg. crashes) in case the stack is not clean. + + src/eog-properties-dialog.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit cf06700f8d2d45c3d582e2dc071c8fce72db468c +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Sep 22 22:57:39 2009 +0200 + + Remove unused variables and unnecessary assignments + + plugins/reload/eog-reload-plugin.c | 3 --- + src/eog-properties-dialog.c | 1 - + 2 files changed, 4 deletions(-) + +commit 213a4c70f34cb4319ee39422569fbdb533456d09 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 21 17:41:44 2009 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8743a2f863e4c7edc0e075af197a355ee0852a31 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Sep 21 17:37:53 2009 +0200 + + Update for Release 2.28.0 + + NEWS | 28 ++++++++++++++++++++++++++++ + configure.ac | 4 ++-- + 2 files changed, 30 insertions(+), 2 deletions(-) + +commit e9deee52d8a5cdec316843307ebbbf807d285fda +Author: Amitakhya Phukan <aphukan@fedoraproject.org> +Date: Mon Sep 21 13:08:13 2009 +0530 + + Updating Assamese translations + + po/as.po | 533 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 304 insertions(+), 229 deletions(-) + +commit 8199af0725f975f5c920ed2ed4a8d2fe4498eaf9 +Author: Ask H. Larsen <asklarsen@gmail.com> +Date: Mon Sep 21 00:03:17 2009 +0200 + + Updated Danish translation + + help/da/da.po | 720 +++++++++++++++++++++++++++++----------------------------- + 1 file changed, 359 insertions(+), 361 deletions(-) + +commit e76786389211eebfe73f9d234893fa7d9ba83df1 +Author: Matej Urbančič <mateju@svn.gnome.org> +Date: Fri Sep 18 14:10:02 2009 +0200 + + Updated Slovenian translation + + po/sl.po | 518 +++++++++++++++++++++++++++++---------------------------------- + 1 file changed, 240 insertions(+), 278 deletions(-) + +commit ea0da4220b46512abe7bc41daad0c07effaeb102 +Author: Manoj Kumar Giri <mgiri@mgiri.csb> +Date: Thu Sep 17 22:37:40 2009 +0530 + + Upadated Oriya Translation + + po/or.po | 264 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 134 insertions(+), 130 deletions(-) + +commit caaf518e5c795320cf6d904f8bcdae912178ad92 +Author: Maxim V. Dziumanenko <dziumanenko@gmail.com> +Date: Wed Sep 16 17:26:39 2009 +0300 + + Added Ukrainian translation + + po/uk.po | 341 +++++++++++++++++++++++++++++++++++---------------------------- + 1 file changed, 189 insertions(+), 152 deletions(-) + +commit f312803660a1455d0ac1a0164fc3a859ff7b9d59 +Author: Rajesh Ranjan <rranjan@rranjan.csb> +Date: Wed Sep 16 16:21:46 2009 +0530 + + hindi update by Rajesh Ranjan + + po/hi.po | 425 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 246 insertions(+), 179 deletions(-) + +commit b1b2d5fd8b16d20b4a78bafd85f74399addc9d36 +Author: Runa Bhattacharjee <runab@redhat.com> +Date: Wed Sep 16 15:21:40 2009 +0530 + + Updated Bengali India Translation + + po/bn_IN.po | 55 +++++++++++++++++++++++++++++++------------------------ + 1 file changed, 31 insertions(+), 24 deletions(-) + +commit a2464be0252f2dda780c2d5e5fa9d904b23370c5 +Author: Adi Roiban <adi@roiban.ro> +Date: Tue Sep 15 00:01:35 2009 +0300 + + Updated Romanian translation + + po/ro.po | 583 +++++++++++++++++++++++++++++++++++++++------------------------ + 1 file changed, 361 insertions(+), 222 deletions(-) + +commit a99a97d7b98f69fead677bda14a54b3d83a2070c +Author: Astur <malditoastur@gmail.com> +Date: Mon Sep 14 16:41:54 2009 +0200 + + Added Asturian translation + + po/LINGUAS | 1 + + po/ast.po | 1394 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1395 insertions(+) + +commit ba377a3d0741b1303efd41b1cab9fe2f9f3855e0 +Author: Ask H. Larsen <asklarsen@gmail.com> +Date: Sun Sep 13 03:01:54 2009 +0200 + + Updated Danish translation + + po/da.po | 418 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 246 insertions(+), 172 deletions(-) + +commit 62f6e109060de427e37282407b6b1e26027a810b +Author: Philip Withnall <philip@tecnocode.co.uk> +Date: Sat Sep 12 23:53:24 2009 +0100 + + Updated British English translation + + po/en_GB.po | 435 +++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 254 insertions(+), 181 deletions(-) + +commit c717837f9b8b75cafcb081b5ed9611a85d0d5ead +Author: Sweta Kothari <swkothar@redhat.com> +Date: Fri Sep 11 18:49:21 2009 +0530 + + Updated Gujarati Translations + + po/gu.po | 426 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 248 insertions(+), 178 deletions(-) + +commit e1a959345967e2036e529286a30f184c0a7491da +Author: Shankar Prasad <svenkate@redhat.com> +Date: Fri Sep 11 14:45:47 2009 +0530 + + Updated Kannada(kn) translation + + po/kn.po | 247 ++++++++++++++++++++++++++++++--------------------------------- + 1 file changed, 119 insertions(+), 128 deletions(-) + +commit 4b9fcfcae1cdd2f2bf128cd936d6bab74041a460 +Author: Ani <peter.ani@gmail.com> +Date: Fri Sep 11 14:30:04 2009 +0530 + + Updated Malayalam Translations + + po/ml.po | 440 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 257 insertions(+), 183 deletions(-) + +commit f834c7501ada3c7c3812b361ad94c12ed7e23bc6 +Author: A S Alam <aalam@users.sf.net> +Date: Fri Sep 11 07:23:44 2009 +0530 + + Updating Translation for Punjabi + + po/pa.po | 396 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 228 insertions(+), 168 deletions(-) + +commit cf30dd5202e445ae461824da11821cc5c5af48af +Author: Kostas Papadimas <pkst@gnome.org> +Date: Thu Sep 10 18:31:49 2009 +0300 + + Updated Greek translation. + + help/el/el.po | 1274 +++++++++++++++++++++++++++++++++++++++++++++------------ + po/el.po | 342 +++++++++------- + 2 files changed, 1201 insertions(+), 415 deletions(-) + +commit 92bbab51e73942bafaf90158dfccceb971a99d1c +Author: Gintautas Miliauskas <gintautas@miliauskas.lt> +Date: Thu Sep 10 14:10:24 2009 +0300 + + Updated Lithuanian translation. + + po/lt.po | 377 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 215 insertions(+), 162 deletions(-) + +commit 1f8510da7c8790ec95648eed641784031a82a936 +Author: krishnababu k <kkrothap@redhat.ocm> +Date: Thu Sep 10 15:46:11 2009 +0530 + + Updated Telugu Translation + + po/te.po | 506 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 271 insertions(+), 235 deletions(-) + +commit 336d8807341caf617a39a07abcde64865dcc3ffe +Author: Sandeep Shedmake <sshedmak@redhat.com> +Date: Wed Sep 9 14:03:47 2009 +0530 + + Updated Marathi Translations + + po/mr.po | 443 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 251 insertions(+), 192 deletions(-) + +commit 97c9c36cc7e71706c50f599c34297bfef04b2e33 +Author: Denis ARNAUD <darnaud@src.gnome.org> +Date: Wed Sep 9 06:06:56 2009 +0200 + + Updated breton translation + + po/br.po | 381 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 196 insertions(+), 185 deletions(-) + +commit 5d158eec52b733df7d2b2da54fb8d743ad0f8677 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Sep 8 12:28:43 2009 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit c57516a5e8ed7ef5d8760afcd5588ca07046a70e +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Sep 8 12:17:05 2009 +0200 + + Update for Release 2.27.92 + + NEWS | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +commit a3723c53bd30d65cd91a443387fb463131e0abe5 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Sep 8 11:47:13 2009 +0200 + + Compare collate keys case-sensitively when sorting the image list + + Fixes broken image order in some locales (eg. cs_CZ). Fixes bgo#594403. + + src/eog-list-store.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +commit ec41a2a8c1db6d8bdb3cf953c7309c3e3fd2940e +Author: Gabor Kelemen <kelemeng@gnome.hu> +Date: Sat Sep 5 19:04:05 2009 +0200 + + Hungarian translation updated + + po/hu.po | 445 ++++++++++++++++++++++++++++++++++++--------------------------- + 1 file changed, 258 insertions(+), 187 deletions(-) + +commit b92c806ff87a6846a49a0e405367ee8cf985ba51 +Author: Shankar Prasad <svenkate@redhat.com> +Date: Tue Sep 1 10:48:22 2009 +0530 + + Updated Kannada(kn) translation + + po/kn.po | 459 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 272 insertions(+), 187 deletions(-) + +commit c472da8747ab6ffbf2f3f98b7af5e5fe6c6885de +Author: Runa Bhattacharjee <runab@redhat.com> +Date: Mon Aug 31 16:50:19 2009 +0530 + + Updated Bengali India Translations + + po/bn_IN.po | 435 +++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 252 insertions(+), 183 deletions(-) + +commit b314ba281a3799410dce7bb71a33d47116a6663b +Author: Baris Cicek <baris@teamforce.name.tr> +Date: Sun Aug 30 06:37:46 2009 +0300 + + Updated Turkish translation from Askin Yollu. + + po/tr.po | 690 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 404 insertions(+), 286 deletions(-) + +commit bddc830b4ec5cac8633849da395d2d96f55f3503 +Author: Changwoo Ryu <cwryu@debian.org> +Date: Sun Aug 30 07:55:02 2009 +0900 + + Update Korean translation + + po/ko.po | 413 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 225 insertions(+), 188 deletions(-) + +commit de6c0ca0dd173ca590b13ed5c9229b389ffda56c +Author: Davide Falagna <davide.falagna@alice.it> +Date: Fri Aug 28 14:42:06 2009 +0200 + + Updated Italian translation + + po/it.po | 446 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 261 insertions(+), 185 deletions(-) + +commit e5919d15240cde5fcdb824b643a848a73e4e4c88 +Author: Miloš Popović <mpopovic@src.gnome.org> +Date: Fri Aug 28 03:13:50 2009 +0200 + + Updated Serbian translation + + po/sr.po | 412 ++++++++++++++++++++++++++++++++++----------------------- + po/sr@latin.po | 412 ++++++++++++++++++++++++++++++++++----------------------- + 2 files changed, 494 insertions(+), 330 deletions(-) + +commit 09fd5393fb8f9e48289735a80960976a57a12ec8 +Author: Inaki Larranaga Murgoitio <dooteo@zundan.com> +Date: Wed Aug 26 10:50:43 2009 +0200 + + Updated Basque language + + po/eu.po | 257 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 128 insertions(+), 129 deletions(-) + +commit 881fa5a4ad4f9ecd7a6d0f5415f063086813a614 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Aug 25 20:00:21 2009 +0200 + + Don't try to autorotate before the metadata was loaded + + Autorotation would fail in that case. As it is only performed once for + each image a simple image dimension query could prevent autorotation + entirely for an image. Fixes bgo#592945. + + Closes: http://bugzilla.gnome.org/show_bug.cgi?id=592945 + + src/eog-image.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +commit 3c501d254c968bcd955194a6881c7b5bb8868c34 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Aug 25 19:56:17 2009 +0200 + + Fix check if only the image dimensions need to be loaded + + The check was assuming that if there's more requested than only image + dimensions. This breaks with the image collection tooltips which don't + request image data but Exif data in addition to the dimensions. + + src/eog-image.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +commit f54d50e992ed57bb06ea433de65d9cce8d129463 +Author: Denis Arnaud <darnaud@src.gnome.org> +Date: Tue Aug 25 04:58:26 2009 +0200 + + Updated breton translation and added br in LINGUAS + + po/LINGUAS | 1 + + po/br.po | 1288 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 1289 insertions(+) + +commit b04ccc996dfe73a52d4b6f5bace88728c61cf8f3 +Author: Duarte Loreto <happyguy_pt@hotmail.com> +Date: Tue Aug 25 00:29:06 2009 +0100 + + Updated Portuguese translation + + po/pt.po | 433 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 252 insertions(+), 181 deletions(-) + +commit 0dcd4b684c76c094b065851cecb99a69fc8a4599 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Aug 25 00:06:42 2009 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit 8e72af0a4681585e871c25697f36d2d87063feb5 +Author: Felix Riemann <friemann@gnome.org> +Date: Tue Aug 25 00:02:30 2009 +0200 + + Update for Release 2.27.91 + + NEWS | 21 +++++++++++++++++++++ + 1 file changed, 21 insertions(+) + +commit 66d71ddf5d7129a02bcee28931ba6e8d8d592289 +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 24 18:08:42 2009 +0200 + + Don't access Exif data unconditionally, even in EogImage itself + + This could lead to a race condition with broken Exif data when having + certain plugins like the statusbar-date plugin enabled. + This hopefully fixes bgo#590693. + + src/eog-image.c | 12 +++++++++--- + 1 file changed, 9 insertions(+), 3 deletions(-) + +commit bc010e9885f3be9f50f37366e4f6fd6910c103db +Author: Felix Riemann <friemann@gnome.org> +Date: Mon Aug 24 17:59:25 2009 +0200 + + Fix critical warnings in last commit + + Avoids critical warnings because we forgot that g_app_info_get_icon + can return NULL in commit 7bba458. + + src/eog-window.c | 10 +++++++--- + 1 file changed, 7 insertions(+), 3 deletions(-) + +commit 7bba45892744820d252fd981029ee93a22fec21e +Author: Marcus Carlson <gnomebugzilla@mejlamej.nu> +Date: Mon Aug 24 17:47:15 2009 +0200 + + Make "Open with" menu look similar to Nautilus's + + Removes the duplicate "Open with..," prefix for menu entries and + displays the application icon if available. This will make the menu look + more like the "Open with" list in nautilus (not identical though). + + Closes: http://bugzilla.gnome.org/show_bug.cgi?id=592649 (bgo#592649). + + src/eog-window.c | 36 +++++++++++++++++++++++++++++++++++- + 1 file changed, 35 insertions(+), 1 deletion(-) + +commit c3defb14a992bce58018c16872b22f9aa32fc25f +Author: Theppitak Karoonboonyanan <thep@linux.thai.net> +Date: Sun Aug 23 12:33:34 2009 +0700 + + Updated Thai translation. + + po/th.po | 416 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 244 insertions(+), 172 deletions(-) + +commit fb24fbe8e4234a6a55afca55180c254512ac24a4 +Author: Adrian Guniš <andygun696@gmail.com> +Date: Thu Aug 20 22:14:51 2009 +0200 + + Update Czech translation + + po/cs.po | 18 ++++++++++-------- + 1 file changed, 10 insertions(+), 8 deletions(-) + +commit fdf87686a8330f3632d102ac1ed8a6384d7f0ea8 +Author: Khaled Hosny <khaledhosny@eglug.org> +Date: Thu Aug 20 22:54:23 2009 +0300 + + Updated Arabic translation + + po/ar.po | 291 +++++++++++++++++++++++++++++++-------------------------------- + 1 file changed, 142 insertions(+), 149 deletions(-) + +commit 17a79876415702dfa64e37b1c4e3cb9f9cd3dd38 +Author: Antón Méixome <meixome@mancomun.org> +Date: Wed Aug 19 14:50:57 2009 +0200 + + Updated Galician Translation + + po/gl.po | 27 ++++++++++++++++++++------- + 1 file changed, 20 insertions(+), 7 deletions(-) + +commit 1efb4057a91ff6c6407ba4c809c58369baeeb450 +Author: Alexander Shopov <ash@contact.bg> +Date: Wed Aug 19 00:32:56 2009 +0300 + + Updated Bulgarian translation + + po/bg.po | 418 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 246 insertions(+), 172 deletions(-) + +commit ebb800f8dc28472774bf87b57e41510e2dda441d +Author: Piotr Drąg <piotrdrag@gmail.com> +Date: Mon Aug 17 22:29:18 2009 +0200 + + Updated Polish translation + + po/pl.po | 617 +++++++++++++++++++++++++++++++++++++-------------------------- + 1 file changed, 366 insertions(+), 251 deletions(-) + +commit aba6e4b6ddad8cd8cfcc1c74ee41d8ab2ffe38d0 +Author: Claude Paroz <claude@2xlibre.net> +Date: Sat Aug 15 15:19:20 2009 +0200 + + Updated French translation + + Contributed by Laurent Coudeur and Claude Paroz + + po/fr.po | 420 ++++++++++++++++++++++++++++++++++++++------------------------- + 1 file changed, 251 insertions(+), 169 deletions(-) + +commit 6c9d310d60326be246bfed0ab9d357753e8348ad +Author: Seán de Búrca <leftmostcat@gmail.com> +Date: Sat Aug 15 02:01:20 2009 -0600 + + Updated Irish translation + + po/ga.po | 807 +++++++++++++++++++++++++++++++++++++++++---------------------- + 1 file changed, 533 insertions(+), 274 deletions(-) + +commit 06de0332fa6e6723e53891a81cb7a3ca01b3095d +Author: Tommi Vainikainen <thv@iki.fi> +Date: Fri Aug 14 00:34:06 2009 +0300 + + Updated Finnish translation + + po/fi.po | 338 ++++++++++++++++++++++++++++++++++----------------------------- + 1 file changed, 185 insertions(+), 153 deletions(-) + +commit e890698c1a770d6efcb7e27d4b1c4335349d2c83 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Aug 12 20:43:05 2009 +0200 + + Post-release version bump + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +commit e03da70dd745f016b906d431f928aa5cebd7c0f7 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Aug 12 20:36:23 2009 +0200 + + Update for Release 2.27.90 + + NEWS | 31 +++++++++++++++++++++++++++++++ + 1 file changed, 31 insertions(+) + +commit d31866afb98d8d01691bbf958bae3e40224af397 +Author: Felix Riemann <friemann@gnome.org> +Date: Wed Aug 12 20:18:09 2009 +0200 + + Only put commits into autogenerated log that are not in the old ones + + The autogenerated ChangeLog only needs to contain the commits that have + not been entered in the old ChangeLog files. This means everything + before commit 3b9b307 can be filtered out. Also detect renames as such. + + Makefile.am | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +commit 83e4007766533ff1b6d2fa4c56f22921cd59b63d +Author: Manoj Kumar Giri <mgiri@mgiri.csb> +Date: Wed Aug 12 15:05:44 2009 +0530 + + Updated Oriya Translation + + po/or.po | 611 ++++++++++++++++++++++++++++++++------------------------------- + 1 file changed, 311 insertions(+), 300 deletions(-) + +commit f2b2d6c8b2a9808fbdc1e8dcaf26805f42dc9e09 +Author: Lucas Rocha <lucasr@gnome.org> +Date: Tue Aug 11 00:18:12 2009 +0100 + + [build] Autogenerate ChangeLog on distcheck + + Makefile.am | 14 ++++++++++++++ + configure.ac | 3 ++- + 2 files changed, 16 insertions(+), 1 deletion(-) + +commit 7ed8e2ce643ca57ffb2954d2a669f6b3b4c1c326 +Author: Lucas Rocha <lucasr@gnome.org> +Date: Mon Aug 10 22:37:13 2009 +0100 + + Add ChangeLog with commit message instructions + + ChangeLog | 47 +++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 47 insertions(+) + +commit 3b9b3078297cbcf594f8f0c9e2331a4f62018b6e +Author: Lucas Rocha <lucasr@gnome.org> +Date: Mon Aug 10 22:36:23 2009 +0100 + + Rename ChangeLog to ChangeLog.pre-git + + ChangeLog => ChangeLog.pre-git | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) diff -Nru eog-3.26.2/compile eog-3.27.90/compile --- eog-3.26.2/compile 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/compile 1970-01-01 00:00:00.000000000 +0000 @@ -1,348 +0,0 @@ -#! /bin/sh -# Wrapper for compilers which do not understand '-c -o'. - -scriptversion=2016-01-11.22; # UTC - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. -# Written by Tom Tromey <tromey@cygnus.com>. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This file is maintained in Automake, please report -# bugs to <bug-automake@gnu.org> or send patches to -# <automake-patches@gnu.org>. - -nl=' -' - -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent tools from complaining about whitespace usage. -IFS=" "" $nl" - -file_conv= - -# func_file_conv build_file lazy -# Convert a $build file to $host form and store it in $file -# Currently only supports Windows hosts. If the determined conversion -# type is listed in (the comma separated) LAZY, no conversion will -# take place. -func_file_conv () -{ - file=$1 - case $file in - / | /[!/]*) # absolute file, and not a UNC file - if test -z "$file_conv"; then - # lazily determine how to convert abs files - case `uname -s` in - MINGW*) - file_conv=mingw - ;; - CYGWIN*) - file_conv=cygwin - ;; - *) - file_conv=wine - ;; - esac - fi - case $file_conv/,$2, in - *,$file_conv,*) - ;; - mingw/*) - file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` - ;; - cygwin/*) - file=`cygpath -m "$file" || echo "$file"` - ;; - wine/*) - file=`winepath -w "$file" || echo "$file"` - ;; - esac - ;; - esac -} - -# func_cl_dashL linkdir -# Make cl look for libraries in LINKDIR -func_cl_dashL () -{ - func_file_conv "$1" - if test -z "$lib_path"; then - lib_path=$file - else - lib_path="$lib_path;$file" - fi - linker_opts="$linker_opts -LIBPATH:$file" -} - -# func_cl_dashl library -# Do a library search-path lookup for cl -func_cl_dashl () -{ - lib=$1 - found=no - save_IFS=$IFS - IFS=';' - for dir in $lib_path $LIB - do - IFS=$save_IFS - if $shared && test -f "$dir/$lib.dll.lib"; then - found=yes - lib=$dir/$lib.dll.lib - break - fi - if test -f "$dir/$lib.lib"; then - found=yes - lib=$dir/$lib.lib - break - fi - if test -f "$dir/lib$lib.a"; then - found=yes - lib=$dir/lib$lib.a - break - fi - done - IFS=$save_IFS - - if test "$found" != yes; then - lib=$lib.lib - fi -} - -# func_cl_wrapper cl arg... -# Adjust compile command to suit cl -func_cl_wrapper () -{ - # Assume a capable shell - lib_path= - shared=: - linker_opts= - for arg - do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - eat=1 - case $2 in - *.o | *.[oO][bB][jJ]) - func_file_conv "$2" - set x "$@" -Fo"$file" - shift - ;; - *) - func_file_conv "$2" - set x "$@" -Fe"$file" - shift - ;; - esac - ;; - -I) - eat=1 - func_file_conv "$2" mingw - set x "$@" -I"$file" - shift - ;; - -I*) - func_file_conv "${1#-I}" mingw - set x "$@" -I"$file" - shift - ;; - -l) - eat=1 - func_cl_dashl "$2" - set x "$@" "$lib" - shift - ;; - -l*) - func_cl_dashl "${1#-l}" - set x "$@" "$lib" - shift - ;; - -L) - eat=1 - func_cl_dashL "$2" - ;; - -L*) - func_cl_dashL "${1#-L}" - ;; - -static) - shared=false - ;; - -Wl,*) - arg=${1#-Wl,} - save_ifs="$IFS"; IFS=',' - for flag in $arg; do - IFS="$save_ifs" - linker_opts="$linker_opts $flag" - done - IFS="$save_ifs" - ;; - -Xlinker) - eat=1 - linker_opts="$linker_opts $2" - ;; - -*) - set x "$@" "$1" - shift - ;; - *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) - func_file_conv "$1" - set x "$@" -Tp"$file" - shift - ;; - *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) - func_file_conv "$1" mingw - set x "$@" "$file" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift - done - if test -n "$linker_opts"; then - linker_opts="-link$linker_opts" - fi - exec "$@" $linker_opts - exit 1 -} - -eat= - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: compile [--help] [--version] PROGRAM [ARGS] - -Wrapper for compilers which do not understand '-c -o'. -Remove '-o dest.o' from ARGS, run PROGRAM with the remaining -arguments, and rename the output as expected. - -If you are trying to build a whole package this is not the -right script to run: please start by reading the file 'INSTALL'. - -Report bugs to <bug-automake@gnu.org>. -EOF - exit $? - ;; - -v | --v*) - echo "compile $scriptversion" - exit $? - ;; - cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ - icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) - func_cl_wrapper "$@" # Doesn't return... - ;; -esac - -ofile= -cfile= - -for arg -do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - # So we strip '-o arg' only if arg is an object. - eat=1 - case $2 in - *.o | *.obj) - ofile=$2 - ;; - *) - set x "$@" -o "$2" - shift - ;; - esac - ;; - *.c) - cfile=$1 - set x "$@" "$1" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift -done - -if test -z "$ofile" || test -z "$cfile"; then - # If no '-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # '.c' file was seen then we are probably linking. That is also - # ok. - exec "$@" -fi - -# Name of file we expect compiler to create. -cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` - -# Create the lock directory. -# Note: use '[/\\:.-]' here to ensure that we don't use the same name -# that we are using for the .o file. Also, base the name on the expected -# object file name, since that is what matters with a parallel build. -lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d -while true; do - if mkdir "$lockdir" >/dev/null 2>&1; then - break - fi - sleep 1 -done -# FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir '$lockdir'; exit 1" 1 2 15 - -# Run the compile. -"$@" -ret=$? - -if test -f "$cofile"; then - test "$cofile" = "$ofile" || mv "$cofile" "$ofile" -elif test -f "${cofile}bj"; then - test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" -fi - -rmdir "$lockdir" -exit $ret - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC0" -# time-stamp-end: "; # UTC" -# End: diff -Nru eog-3.26.2/config.guess eog-3.27.90/config.guess --- eog-3.26.2/config.guess 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/config.guess 1970-01-01 00:00:00.000000000 +0000 @@ -1,1476 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright 1992-2017 Free Software Foundation, Inc. - -timestamp='2017-08-08' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see <http://www.gnu.org/licenses/>. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). -# -# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. -# -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess -# -# Please send patches to <config-patches@gnu.org>. - - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <config-patches@gnu.org>." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright 1992-2017 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -case "${UNAME_SYSTEM}" in -Linux|GNU|GNU/*) - # If the system lacks a compiler, then just pick glibc. - # We could probably try harder. - LIBC=gnu - - eval $set_cc_for_build - cat <<-EOF > $dummy.c - #include <features.h> - #if defined(__UCLIBC__) - LIBC=uclibc - #elif defined(__dietlibc__) - LIBC=dietlibc - #else - LIBC=gnu - #endif - EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` - ;; -esac - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ - /sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || \ - echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - earmv*) - arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'` - endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'` - machine=${arch}${endian}-unknown - ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently (or will in the future) and ABI. - case "${UNAME_MACHINE_ARCH}" in - earm*) - os=netbsdelf - ;; - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # Determine ABI tags. - case "${UNAME_MACHINE_ARCH}" in - earm*) - expr='s/^earmv[0-9]/-eabi/;s/eb$//' - abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"` - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}${abi}" - exit ;; - *:Bitrig:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:LibertyBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:Sortix:*:*) - echo ${UNAME_MACHINE}-unknown-sortix - exit ;; - *:Redox:*:*) - echo ${UNAME_MACHINE}-unknown-redox - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE=alpha ;; - "EV4.5 (21064)") - UNAME_MACHINE=alpha ;; - "LCA4 (21066/21068)") - UNAME_MACHINE=alpha ;; - "EV5 (21164)") - UNAME_MACHINE=alphaev5 ;; - "EV5.6 (21164A)") - UNAME_MACHINE=alphaev56 ;; - "EV5.6 (21164PC)") - UNAME_MACHINE=alphapca56 ;; - "EV5.7 (21164PC)") - UNAME_MACHINE=alphapca57 ;; - "EV6 (21264)") - UNAME_MACHINE=alphaev6 ;; - "EV6.7 (21264A)") - UNAME_MACHINE=alphaev67 ;; - "EV6.8CB (21264C)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8AL (21264B)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8CX (21264D)") - UNAME_MACHINE=alphaev68 ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE=alphaev69 ;; - "EV7 (21364)") - UNAME_MACHINE=alphaev7 ;; - "EV7.9 (21364A)") - UNAME_MACHINE=alphaev79 ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` - # Reset EXIT trap before exiting to avoid spurious non-zero exit code. - exitcode=$? - trap '' 0 - exit $exitcode ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm*:riscos:*:*|arm*:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux${UNAME_RELEASE} - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval $set_cc_for_build - SUN_ARCH=i386 - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH=x86_64 - fi - fi - echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include <stdio.h> /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <sys/systemcfg.h> - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[4567]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/lslpp ] ; then - IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | - awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 - 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH=hppa2.0n ;; - 64) HP_ARCH=hppa2.0w ;; - '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include <stdlib.h> - #include <unistd.h> - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = hppa2.0w ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | - grep -q __LP64__ - then - HP_ARCH=hppa2.0w - else - HP_ARCH=hppa64 - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <unistd.h> - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - UNAME_PROCESSOR=`/usr/bin/uname -p` - case ${UNAME_PROCESSOR} in - amd64) - UNAME_PROCESSOR=x86_64 ;; - i386) - UNAME_PROCESSOR=i586 ;; - esac - echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW64*:*) - echo ${UNAME_MACHINE}-pc-mingw64 - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - *:MSYS*:*) - echo ${UNAME_MACHINE}-pc-msys - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - authenticamd | genuineintel | EM64T) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - 8664:Windows_NT:*) - echo x86_64-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - aarch64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - aarch64_be:Linux:*:*) - UNAME_MACHINE=aarch64_be - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC=gnulibc1 ; fi - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - arc:Linux:*:* | arceb:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - else - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi - else - echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf - fi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - cris:Linux:*:*) - echo ${UNAME_MACHINE}-axis-linux-${LIBC} - exit ;; - crisv32:Linux:*:*) - echo ${UNAME_MACHINE}-axis-linux-${LIBC} - exit ;; - e2k:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - frv:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - hexagon:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - i*86:Linux:*:*) - echo ${UNAME_MACHINE}-pc-linux-${LIBC} - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - k1om:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - mips:Linux:*:* | mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef ${UNAME_MACHINE} - #undef ${UNAME_MACHINE}el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=${UNAME_MACHINE}el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=${UNAME_MACHINE} - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } - ;; - mips64el:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - openrisc*:Linux:*:*) - echo or1k-unknown-linux-${LIBC} - exit ;; - or32:Linux:*:* | or1k*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-${LIBC} - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-${LIBC} - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; - PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; - *) echo hppa-unknown-linux-${LIBC} ;; - esac - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-${LIBC} - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-${LIBC} - exit ;; - ppc64le:Linux:*:*) - echo powerpc64le-unknown-linux-${LIBC} - exit ;; - ppcle:Linux:*:*) - echo powerpcle-unknown-linux-${LIBC} - exit ;; - riscv32:Linux:*:* | riscv64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux-${LIBC} - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - tile*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-${LIBC} - exit ;; - x86_64:Linux:*:*) - echo ${UNAME_MACHINE}-pc-linux-${LIBC} - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` - echo ${UNAME_MACHINE}-pc-isc$UNAME_REL - elif /bin/uname -X 2>/dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configure will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says <Richard.M.Bartel@ccMail.Census.GOV> - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes <hewes@openmarket.com>. - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - x86_64:Haiku:*:*) - echo x86_64-unknown-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - SX-ACE:SUPER-UX:*:*) - echo sxace-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - eval $set_cc_for_build - if test "$UNAME_PROCESSOR" = unknown ; then - UNAME_PROCESSOR=powerpc - fi - if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - case $UNAME_PROCESSOR in - i386) UNAME_PROCESSOR=x86_64 ;; - powerpc) UNAME_PROCESSOR=powerpc64 ;; - esac - fi - # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc - if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_PPC >/dev/null - then - UNAME_PROCESSOR=powerpc - fi - fi - elif test "$UNAME_PROCESSOR" = i386 ; then - # Avoid executing cc on OS X 10.9, as it ships with a stub - # that puts up a graphical alert prompting to install - # developer tools. Any system running Mac OS X 10.7 or - # later (Darwin 11 and later) is required to have a 64-bit - # processor. This is not true of the ARM version of Darwin - # that Apple uses in portable devices. - UNAME_PROCESSOR=x86_64 - fi - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = x86; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NEO-*:NONSTOP_KERNEL:*:*) - echo neo-tandem-nsk${UNAME_RELEASE} - exit ;; - NSE-*:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-*:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - NSX-*:NONSTOP_KERNEL:*:*) - echo nsx-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = 386; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'` - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; - i*86:AROS:*:*) - echo ${UNAME_MACHINE}-pc-aros - exit ;; - x86_64:VMkernel:*:*) - echo ${UNAME_MACHINE}-unknown-esx - exit ;; - amd64:Isilon\ OneFS:*:*) - echo x86_64-unknown-onefs - exit ;; -esac - -cat >&2 <<EOF -$0: unable to guess system type - -This script (version $timestamp), has failed to recognize the -operating system you are using. If your script is old, overwrite *all* -copies of config.guess and config.sub with the latest versions from: - - http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess -and - http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub - -If $0 has already been updated, send the following data and any -information you think might be pertinent to config-patches@gnu.org to -provide the necessary information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff -Nru eog-3.26.2/config.h.in eog-3.27.90/config.h.in --- eog-3.26.2/config.h.in 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/config.h.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,140 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Define to 1 if translation of program messages to the user's native - language is requested. */ -#undef ENABLE_NLS - -/* EOG major version */ -#undef EOG_MAJOR_VERSION - -/* EOG micro version */ -#undef EOG_MICRO_VERSION - -/* EOG minor version */ -#undef EOG_MINOR_VERSION - -/* Gettext package. */ -#undef GETTEXT_PACKAGE - -/* Define if debugging is enabled */ -#undef GNOME_ENABLE_DEBUG - -/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the - CoreFoundation framework. */ -#undef HAVE_CFLOCALECOPYCURRENT - -/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in - the CoreFoundation framework. */ -#undef HAVE_CFPREFERENCESCOPYAPPVALUE - -/* Define if the GNU dcgettext() function is already present or preinstalled. - */ -#undef HAVE_DCGETTEXT - -/* Define to 1 if you have the <dlfcn.h> header file. */ -#undef HAVE_DLFCN_H - -/* XMP support. */ -#undef HAVE_EXEMPI - -/* EXIF Support. */ -#undef HAVE_EXIF - -/* Define if the GNU gettext() function is already present or preinstalled. */ -#undef HAVE_GETTEXT - -/* Define if you have the iconv() function and it works. */ -#undef HAVE_ICONV - -/* Define to enable GObject Introspection */ -#undef HAVE_INTROSPECTION - -/* Define to 1 if you have the <inttypes.h> header file. */ -#undef HAVE_INTTYPES_H - -/* Jpeg Support. */ -#undef HAVE_JPEG - -/* Little CMS Support. */ -#undef HAVE_LCMS - -/* libjpeg is Present. */ -#undef HAVE_LIBJPEG - -/* Define to 1 if you have the `z' library (-lz). */ -#undef HAVE_LIBZ - -/* Define to 1 if you have the <memory.h> header file. */ -#undef HAVE_MEMORY_H - -/* Jpeg Progressive Saving Support. */ -#undef HAVE_PROGRESSIVE_JPEG - -/* RSVG Support. */ -#undef HAVE_RSVG - -/* Define to 1 if you have the <stdint.h> header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the <stdlib.h> header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the <strings.h> header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the <string.h> header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the `strptime' function. */ -#undef HAVE_STRPTIME - -/* Define to 1 if you have the <sys/stat.h> header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the <sys/types.h> header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the <unistd.h> header file. */ -#undef HAVE_UNISTD_H - -/* Define to 1 if you have the <zlib.h> header file. */ -#undef HAVE_ZLIB_H - -/* Define if _NL_MEASUREMENT_MEASUREMENT is available */ -#undef HAVE__NL_MEASUREMENT_MEASUREMENT - -/* Define to the sub-directory where libtool stores uninstalled libraries. */ -#undef LT_OBJDIR - -/* Define if debugging is disabled */ -#undef NDEBUG - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Version number of package */ -#undef VERSION - -/* Define to 1 if the X Window System is missing or not being used. */ -#undef X_DISPLAY_MISSING diff -Nru eog-3.26.2/config.rpath eog-3.27.90/config.rpath --- eog-3.26.2/config.rpath 2017-06-04 14:07:01.000000000 +0000 +++ eog-3.27.90/config.rpath 1970-01-01 00:00:00.000000000 +0000 @@ -1,684 +0,0 @@ -#! /bin/sh -# Output a system dependent set of variables, describing how to set the -# run time search path of shared libraries in an executable. -# -# Copyright 1996-2015 Free Software Foundation, Inc. -# Taken from GNU libtool, 2001 -# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. -# -# The first argument passed to this file is the canonical host specification, -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld -# should be set by the caller. -# -# The set of defined variables is at the end of this script. - -# Known limitations: -# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer -# than 256 bytes, otherwise the compiler driver will dump core. The only -# known workaround is to choose shorter directory names for the build -# directory and/or the installation directory. - -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -shrext=.so - -host="$1" -host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -# Code taken from libtool.m4's _LT_CC_BASENAME. - -for cc_temp in $CC""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` - -# Code taken from libtool.m4's _LT_COMPILER_PIC. - -wl= -if test "$GCC" = yes; then - wl='-Wl,' -else - case "$host_os" in - aix*) - wl='-Wl,' - ;; - mingw* | cygwin* | pw32* | os2* | cegcc*) - ;; - hpux9* | hpux10* | hpux11*) - wl='-Wl,' - ;; - irix5* | irix6* | nonstopux*) - wl='-Wl,' - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - ecc*) - wl='-Wl,' - ;; - icc* | ifort*) - wl='-Wl,' - ;; - lf95*) - wl='-Wl,' - ;; - nagfor*) - wl='-Wl,-Wl,,' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - wl='-Wl,' - ;; - ccc*) - wl='-Wl,' - ;; - xl* | bgxl* | bgf* | mpixl*) - wl='-Wl,' - ;; - como) - wl='-lopt=' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - wl= - ;; - *Sun\ C*) - wl='-Wl,' - ;; - esac - ;; - esac - ;; - newsos6) - ;; - *nto* | *qnx*) - ;; - osf3* | osf4* | osf5*) - wl='-Wl,' - ;; - rdos*) - ;; - solaris*) - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - wl='-Qoption ld ' - ;; - *) - wl='-Wl,' - ;; - esac - ;; - sunos4*) - wl='-Qoption ld ' - ;; - sysv4 | sysv4.2uw2* | sysv4.3*) - wl='-Wl,' - ;; - sysv4*MP*) - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - wl='-Wl,' - ;; - unicos*) - wl='-Wl,' - ;; - uts4*) - ;; - esac -fi - -# Code taken from libtool.m4's _LT_LINKER_SHLIBS. - -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no - -case "$host_os" in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - # Unlike libtool, we use -rpath here, not --rpath, since the documented - # option of GNU ld is called -rpath, not --rpath. - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - case "$host_os" in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - fi - ;; - amigaos*) - case "$host_cpu" in - powerpc) - ;; - m68k) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - cygwin* | mingw* | pw32* | cegcc*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - haiku*) - ;; - interix[3-9]*) - hardcode_direct=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - netbsd*) - ;; - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - else - ld_shlibs=no - fi - ;; - esac - ;; - sunos4*) - hardcode_direct=yes - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - esac - if test "$ld_shlibs" = no; then - hardcode_libdir_flag_spec= - fi -else - case "$host_os" in - aix3*) - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - else - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - fi - hardcode_direct=yes - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - fi - # Begin _LT_AC_SYS_LIBPATH_AIX. - echo 'int main () { return 0; }' > conftest.c - ${CC} ${LDFLAGS} conftest.c -o conftest - aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - fi - if test -z "$aix_libpath"; then - aix_libpath="/usr/lib:/lib" - fi - rm -f conftest.c conftest - # End _LT_AC_SYS_LIBPATH_AIX. - if test "$aix_use_runtimelinking" = yes; then - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - else - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - fi - fi - ;; - amigaos*) - case "$host_cpu" in - powerpc) - ;; - m68k) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - bsdi[45]*) - ;; - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - libext=lib - ;; - darwin* | rhapsody*) - hardcode_direct=no - if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then - : - else - ld_shlibs=no - fi - ;; - dgux*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - freebsd2.[01]*) - hardcode_direct=yes - hardcode_minus_L=yes - ;; - freebsd* | dragonfly*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - hpux9*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - hpux10*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - hpux11*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - ;; - *) - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - netbsd*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - newsos6) - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - *nto* | *qnx*) - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - osf3*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) - if test "$GCC" = yes; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - # Both cc and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - solaris*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - sunos4*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - ;; - sysv4) - case $host_vendor in - sni) - hardcode_direct=yes # is this really true??? - ;; - siemens) - hardcode_direct=no - ;; - motorola) - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - ;; - sysv4.3*) - ;; - sysv4*MP*) - if test -d /usr/nec; then - ld_shlibs=yes - fi - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - ;; - sysv5* | sco3.2v5* | sco5v6*) - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator=':' - ;; - uts4*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - *) - ld_shlibs=no - ;; - esac -fi - -# Check dynamic linker characteristics -# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. -# Unlike libtool.m4, here we don't care about _all_ names of the library, but -# only about the one the linker finds when passed -lNAME. This is the last -# element of library_names_spec in libtool.m4, or possibly two of them if the -# linker has special search rules. -library_names_spec= # the last element of library_names_spec in libtool.m4 -libname_spec='lib$name' -case "$host_os" in - aix3*) - library_names_spec='$libname.a' - ;; - aix[4-9]*) - library_names_spec='$libname$shrext' - ;; - amigaos*) - case "$host_cpu" in - powerpc*) - library_names_spec='$libname$shrext' ;; - m68k) - library_names_spec='$libname.a' ;; - esac - ;; - beos*) - library_names_spec='$libname$shrext' - ;; - bsdi[45]*) - library_names_spec='$libname$shrext' - ;; - cygwin* | mingw* | pw32* | cegcc*) - shrext=.dll - library_names_spec='$libname.dll.a $libname.lib' - ;; - darwin* | rhapsody*) - shrext=.dylib - library_names_spec='$libname$shrext' - ;; - dgux*) - library_names_spec='$libname$shrext' - ;; - freebsd[23].*) - library_names_spec='$libname$shrext$versuffix' - ;; - freebsd* | dragonfly*) - library_names_spec='$libname$shrext' - ;; - gnu*) - library_names_spec='$libname$shrext' - ;; - haiku*) - library_names_spec='$libname$shrext' - ;; - hpux9* | hpux10* | hpux11*) - case $host_cpu in - ia64*) - shrext=.so - ;; - hppa*64*) - shrext=.sl - ;; - *) - shrext=.sl - ;; - esac - library_names_spec='$libname$shrext' - ;; - interix[3-9]*) - library_names_spec='$libname$shrext' - ;; - irix5* | irix6* | nonstopux*) - library_names_spec='$libname$shrext' - case "$host_os" in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; - *) libsuff= shlibsuff= ;; - esac - ;; - esac - ;; - linux*oldld* | linux*aout* | linux*coff*) - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - library_names_spec='$libname$shrext' - ;; - knetbsd*-gnu) - library_names_spec='$libname$shrext' - ;; - netbsd*) - library_names_spec='$libname$shrext' - ;; - newsos6) - library_names_spec='$libname$shrext' - ;; - *nto* | *qnx*) - library_names_spec='$libname$shrext' - ;; - openbsd*) - library_names_spec='$libname$shrext$versuffix' - ;; - os2*) - libname_spec='$name' - shrext=.dll - library_names_spec='$libname.a' - ;; - osf3* | osf4* | osf5*) - library_names_spec='$libname$shrext' - ;; - rdos*) - ;; - solaris*) - library_names_spec='$libname$shrext' - ;; - sunos4*) - library_names_spec='$libname$shrext$versuffix' - ;; - sysv4 | sysv4.3*) - library_names_spec='$libname$shrext' - ;; - sysv4*MP*) - library_names_spec='$libname$shrext' - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - library_names_spec='$libname$shrext' - ;; - tpf*) - library_names_spec='$libname$shrext' - ;; - uts4*) - library_names_spec='$libname$shrext' - ;; -esac - -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` -shlibext=`echo "$shrext" | sed -e 's,^\.,,'` -escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` - -LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF - -# How to pass a linker flag through the compiler. -wl="$escaped_wl" - -# Static library suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally "so"). -shlibext="$shlibext" - -# Format of library name prefix. -libname_spec="$escaped_libname_spec" - -# Library names that the linker finds when passed -lNAME. -library_names_spec="$escaped_library_names_spec" - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec" - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator="$hardcode_libdir_separator" - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct="$hardcode_direct" - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L="$hardcode_minus_L" - -EOF diff -Nru eog-3.26.2/config.sub eog-3.27.90/config.sub --- eog-3.26.2/config.sub 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/config.sub 1970-01-01 00:00:00.000000000 +0000 @@ -1,1836 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright 1992-2017 Free Software Foundation, Inc. - -timestamp='2017-04-02' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see <http://www.gnu.org/licenses/>. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). - - -# Please send patches to <config-patches@gnu.org>. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <config-patches@gnu.org>." - -version="\ -GNU config.sub ($timestamp) - -Copyright 1992-2017 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ - linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ - kopensolaris*-gnu* | cloudabi*-eabi* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - android-linux) - os=-linux-android - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray | -microblaze*) - os= - basic_machine=$1 - ;; - -bluegene*) - os=-cnk - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*178) - os=-lynxos178 - ;; - -lynx*5) - os=-lynxos5 - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | aarch64 | aarch64_be \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arceb \ - | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ - | avr | avr32 \ - | ba \ - | be32 | be64 \ - | bfin \ - | c4x | c8051 | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | e2k | epiphany \ - | fido | fr30 | frv | ft32 \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | hexagon \ - | i370 | i860 | i960 | ia16 | ia64 \ - | ip2k | iq2000 \ - | k1om \ - | le32 | le64 \ - | lm32 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ - | mips64r5900 | mips64r5900el \ - | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa32r6 | mipsisa32r6el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64r6 | mipsisa64r6el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipsr5900 | mipsr5900el \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | moxie \ - | mt \ - | msp430 \ - | nds32 | nds32le | nds32be \ - | nios | nios2 | nios2eb | nios2el \ - | ns16k | ns32k \ - | open8 | or1k | or1knd | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle \ - | pru \ - | pyramid \ - | riscv32 | riscv64 \ - | rl78 | rx \ - | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu \ - | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ - | ubicom32 \ - | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ - | visium \ - | wasm32 \ - | we32k \ - | x86 | xc16x | xstormy16 | xtensa \ - | z8k | z80) - basic_machine=$basic_machine-unknown - ;; - c54x) - basic_machine=tic54x-unknown - ;; - c55x) - basic_machine=tic55x-unknown - ;; - c6x) - basic_machine=tic6x-unknown - ;; - leon|leon[3-9]) - basic_machine=sparc-$basic_machine - ;; - m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - strongarm | thumb | xscale) - basic_machine=arm-unknown - ;; - xgate) - basic_machine=$basic_machine-unknown - os=-none - ;; - xscaleeb) - basic_machine=armeb-unknown - ;; - - xscaleel) - basic_machine=armel-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | aarch64-* | aarch64_be-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | ba-* \ - | be32-* | be64-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* \ - | c8051-* | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | e2k-* | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | hexagon-* \ - | i*86-* | i860-* | i960-* | ia16-* | ia64-* \ - | ip2k-* | iq2000-* \ - | k1om-* \ - | le32-* | le64-* \ - | lm32-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ - | microblaze-* | microblazeel-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64r5900-* | mips64r5900el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa32r6-* | mipsisa32r6el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64r6-* | mipsisa64r6el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipsr5900-* | mipsr5900el-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nds32-* | nds32le-* | nds32be-* \ - | nios-* | nios2-* | nios2eb-* | nios2el-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | open8-* \ - | or1k*-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ - | pru-* \ - | pyramid-* \ - | riscv32-* | riscv64-* \ - | rl78-* | romp-* | rs6000-* | rx-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ - | tahoe-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tile*-* \ - | tron-* \ - | ubicom32-* \ - | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ - | vax-* \ - | visium-* \ - | wasm32-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-* | z80-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aros) - basic_machine=i386-pc - os=-aros - ;; - asmjs) - basic_machine=asmjs-unknown - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - bluegene*) - basic_machine=powerpc-ibm - os=-cnk - ;; - c54x-*) - basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c55x-*) - basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c6x-*) - basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - cegcc) - basic_machine=arm-unknown - os=-cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16 | cr16-*) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dicos) - basic_machine=i686-pc - os=-dicos - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - e500v[12]) - basic_machine=powerpc-unknown - os=$os"spe" - ;; - e500v[12]-*) - basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - os=$os"spe" - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - leon-*|leon[3-9]-*) - basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - microblaze*) - basic_machine=microblaze-xilinx - ;; - mingw64) - basic_machine=x86_64-pc - os=-mingw64 - ;; - mingw32) - basic_machine=i686-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - moxiebox) - basic_machine=moxie-unknown - os=-moxiebox - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - msys) - basic_machine=i686-pc - os=-msys - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - nacl) - basic_machine=le32-unknown - os=-nacl - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - neo-tandem) - basic_machine=neo-tandem - ;; - nse-tandem) - basic_machine=nse-tandem - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - nsx-tandem) - basic_machine=nsx-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc | ppcbe) basic_machine=powerpc-unknown - ;; - ppc-* | ppcbe-*) - basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-* | ppc64p7-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos | rdos64) - basic_machine=x86_64-pc - os=-rdos - ;; - rdos32) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - strongarm-* | thumb-*) - basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tile*) - basic_machine=$basic_machine-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - wasm32) - basic_machine=wasm32-unknown - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - xscale-* | xscalee[bl]-*) - basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - z80-*-coff) - basic_machine=z80-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -auroraux) - os=-auroraux - ;; - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ - | -sym* | -kopensolaris* | -plan9* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* | -cloudabi* | -sortix* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \ - | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ - | -linux-newlib* | -linux-musl* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ - | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -zvmoe) - os=-zvmoe - ;; - -dicos*) - os=-dicos - ;; - -nacl*) - ;; - -ios) - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - c8051-*) - os=-elf - ;; - hexagon-*) - os=-elf - ;; - tic54x-*) - os=-coff - ;; - tic55x-*) - os=-coff - ;; - tic6x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - pru-*) - os=-elf - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -cnk*|-aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff -Nru eog-3.26.2/configure eog-3.27.90/configure --- eog-3.26.2/configure 2017-11-08 19:35:57.000000000 +0000 +++ eog-3.27.90/configure 1970-01-01 00:00:00.000000000 +0000 @@ -1,20895 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for eog 3.26.2. -# -# Report bugs to <http://bugzilla.gnome.org/enter_bug.cgi?product=eog>. -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 - - test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: http://bugzilla.gnome.org/enter_bug.cgi?product=eog -$0: about your system, including any error possibly output -$0: before this message. Then install a modern shell, or -$0: manually run the script under such a shell if you do -$0: have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -SHELL=${CONFIG_SHELL-/bin/sh} - - -test -n "$DJDIR" || exec 7<&0 </dev/null -exec 6>&1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='eog' -PACKAGE_TARNAME='eog' -PACKAGE_VERSION='3.26.2' -PACKAGE_STRING='eog 3.26.2' -PACKAGE_BUGREPORT='http://bugzilla.gnome.org/enter_bug.cgi?product=eog' -PACKAGE_URL='' - -# Factoring default headers for most tests. -ac_includes_default="\ -#include <stdio.h> -#ifdef HAVE_SYS_TYPES_H -# include <sys/types.h> -#endif -#ifdef HAVE_SYS_STAT_H -# include <sys/stat.h> -#endif -#ifdef STDC_HEADERS -# include <stdlib.h> -# include <stddef.h> -#else -# ifdef HAVE_STDLIB_H -# include <stdlib.h> -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include <memory.h> -# endif -# include <string.h> -#endif -#ifdef HAVE_STRINGS_H -# include <strings.h> -#endif -#ifdef HAVE_INTTYPES_H -# include <inttypes.h> -#endif -#ifdef HAVE_STDINT_H -# include <stdint.h> -#endif -#ifdef HAVE_UNISTD_H -# include <unistd.h> -#endif" - -gt_needs= -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIBOBJS -BEHAVE_INSTALLED_TESTS_RULE -BEHAVE_INSTALLED_TESTS_ENABLED -BEHAVE_INSTALLED_TESTS_ENABLED_FALSE -BEHAVE_INSTALLED_TESTS_ENABLED_TRUE -GSETTINGS_RULES -GLIB_COMPILE_SCHEMAS -gsettingsschemadir -GSETTINGS_DISABLE_SCHEMAS_COMPILE -X_EXTRA_LIBS -X_LIBS -X_PRE_LIBS -X_CFLAGS -XMKMF -X11_LIBS -X11_CFLAGS -EOG_LIBS -EOG_CFLAGS -HAVE_RSVG_FALSE -HAVE_RSVG_TRUE -RSVG_LIBS -RSVG_CFLAGS -HAVE_LIBJPEG_80_FALSE -HAVE_LIBJPEG_80_TRUE -ENABLE_JPEG_FALSE -ENABLE_JPEG_TRUE -LIBJPEG -EOG_DOC_EXIF_STOP -EOG_DOC_EXIF_START -HAVE_EXEMPI_FALSE -HAVE_EXEMPI_TRUE -EXEMPI_LIBS -EXEMPI_CFLAGS -HAVE_LCMS_FALSE -HAVE_LCMS_TRUE -LCMS_LIBS -LCMS_CFLAGS -HAVE_EXIF_FALSE -HAVE_EXIF_TRUE -EXIF_LIBS -EXIF_CFLAGS -LIBM -HAVE_INTROSPECTION_FALSE -HAVE_INTROSPECTION_TRUE -INTROSPECTION_MAKEFILE -INTROSPECTION_LIBS -INTROSPECTION_CFLAGS -INTROSPECTION_TYPELIBDIR -INTROSPECTION_GIRDIR -INTROSPECTION_GENERATE -INTROSPECTION_COMPILER -INTROSPECTION_SCANNER -YELP_HELP_RULES -XMLLINT -ITSTOOL -HELP_DIR -YELP_LC_DIST -YELP_LC_MEDIA_LINKS -POSUB -LTLIBINTL -LIBINTL -INTLLIBS -LTLIBICONV -LIBICONV -INTL_MACOSX_LIBS -XGETTEXT_EXTRA_OPTIONS -MSGMERGE -XGETTEXT_015 -XGETTEXT -GMSGFMT_015 -MSGFMT_015 -GMSGFMT -MSGFMT -GETTEXT_MACRO_VERSION -USE_NLS -GETTEXT_PACKAGE -GTK_DOC_USE_REBASE_FALSE -GTK_DOC_USE_REBASE_TRUE -GTK_DOC_USE_LIBTOOL_FALSE -GTK_DOC_USE_LIBTOOL_TRUE -GTK_DOC_BUILD_PDF_FALSE -GTK_DOC_BUILD_PDF_TRUE -GTK_DOC_BUILD_HTML_FALSE -GTK_DOC_BUILD_HTML_TRUE -ENABLE_GTK_DOC_FALSE -ENABLE_GTK_DOC_TRUE -HAVE_GTK_DOC_FALSE -HAVE_GTK_DOC_TRUE -GTKDOC_DEPS_LIBS -GTKDOC_DEPS_CFLAGS -HTML_DIR -GTKDOC_MKPDF -GTKDOC_REBASE -GTKDOC_CHECK_PATH -GTKDOC_CHECK -PKG_CONFIG_LIBDIR -PKG_CONFIG_PATH -PKG_CONFIG -GLIB_MKENUMS -GLIB_GENMARSHAL -GLIB_COMPILE_RESOURCES -CPP -LT_SYS_LIBRARY_PATH -OTOOL64 -OTOOL -LIPO -NMEDIT -DSYMUTIL -MANIFEST_TOOL -RANLIB -ac_ct_AR -AR -DLLTOOL -OBJDUMP -LN_S -NM -ac_ct_DUMPBIN -DUMPBIN -LD -FGREP -EGREP -GREP -SED -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -LIBTOOL -WARN_CFLAGS -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -MAINT -MAINTAINER_MODE_FALSE -MAINTAINER_MODE_TRUE -EOG_API_VERSION -EOG_MICRO_VERSION -EOG_MINOR_VERSION -EOG_MAJOR_VERSION -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -AM_DEFAULT_V -AM_V -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_maintainer_mode -enable_compile_warnings -enable_dependency_tracking -enable_iso_c -enable_debug -enable_static -enable_shared -with_pic -enable_fast_install -with_aix_soname -with_gnu_ld -with_sysroot -enable_libtool_lock -with_html_dir -enable_gtk_doc -enable_gtk_doc_html -enable_gtk_doc_pdf -enable_nls -enable_rpath -with_libiconv_prefix -with_libintl_prefix -with_help_dir -enable_introspection -with_libexif -with_cms -with_xmp -with_libjpeg -with_librsvg -with_x -enable_schemas_compile -enable_installed_tests -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -LT_SYS_LIBRARY_PATH -CPP -PKG_CONFIG -PKG_CONFIG_PATH -PKG_CONFIG_LIBDIR -GTKDOC_DEPS_CFLAGS -GTKDOC_DEPS_LIBS -ITSTOOL -XMLLINT -EXIF_CFLAGS -EXIF_LIBS -LCMS_CFLAGS -LCMS_LIBS -EXEMPI_CFLAGS -EXEMPI_LIBS -RSVG_CFLAGS -RSVG_LIBS -EOG_CFLAGS -EOG_LIBS -X11_CFLAGS -X11_LIBS -XMKMF' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures eog 3.26.2 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/eog] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -X features: - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of eog 3.26.2:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: "make V=1") - --disable-silent-rules verbose build output (undo: "make V=0") - --disable-maintainer-mode - disable make rules and dependencies not useful (and - sometimes confusing) to the casual installer - --enable-compile-warnings=[no/minimum/yes/maximum/error] - Turn on compiler warnings - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build - --enable-iso-c Try to warn if code is not ISO C - --enable-debug[=no] compile with debugging; one of yes/info/profile/no - --enable-static[=PKGS] build static libraries [default=no] - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) - --enable-gtk-doc use gtk-doc to build documentation [[default=no]] - --enable-gtk-doc-html build documentation in html format [[default=yes]] - --enable-gtk-doc-pdf build documentation in pdf format [[default=no]] - --disable-nls do not use Native Language Support - --disable-rpath do not hardcode runtime library paths - --enable-introspection=[no/auto/yes] - Enable introspection for this build - --disable-schemas-compile - Disable regeneration of gschemas.compiled on install - --enable-installed-tests - enable installed unit tests [default=no] - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use - both] - --with-aix-soname=aix|svr4|both - shared library versioning (aka "SONAME") variant to - provide on AIX, [default=aix]. - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot[=DIR] Search for dependent libraries within DIR (or the - compiler's sysroot if not specified). - --with-html-dir=PATH path to installed docs - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib - --without-libiconv-prefix don't search for libiconv in includedir and libdir - --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib - --without-libintl-prefix don't search for libintl in includedir and libdir - --with-help-dir=DIR path where help files are installed - --without-libexif disable EXIF support - --without-cms disable colour management support - --without-xmp disable special XMP support - --without-libjpeg disable special JPEG support - --without-librsvg disable RSVG support - --with-x use the X Window System - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> - LIBS libraries to pass to the linker, e.g. -l<library> - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if - you have headers in a nonstandard directory <include dir> - LT_SYS_LIBRARY_PATH - User-defined run-time library search path. - CPP C preprocessor - PKG_CONFIG path to pkg-config utility - PKG_CONFIG_PATH - directories to add to pkg-config's search path - PKG_CONFIG_LIBDIR - path overriding pkg-config's built-in search path - GTKDOC_DEPS_CFLAGS - C compiler flags for GTKDOC_DEPS, overriding pkg-config - GTKDOC_DEPS_LIBS - linker flags for GTKDOC_DEPS, overriding pkg-config - ITSTOOL Path to the `itstool` command - XMLLINT Path to the `xmllint` command - EXIF_CFLAGS C compiler flags for EXIF, overriding pkg-config - EXIF_LIBS linker flags for EXIF, overriding pkg-config - LCMS_CFLAGS C compiler flags for LCMS, overriding pkg-config - LCMS_LIBS linker flags for LCMS, overriding pkg-config - EXEMPI_CFLAGS - C compiler flags for EXEMPI, overriding pkg-config - EXEMPI_LIBS linker flags for EXEMPI, overriding pkg-config - RSVG_CFLAGS C compiler flags for RSVG, overriding pkg-config - RSVG_LIBS linker flags for RSVG, overriding pkg-config - EOG_CFLAGS C compiler flags for EOG, overriding pkg-config - EOG_LIBS linker flags for EOG, overriding pkg-config - X11_CFLAGS C compiler flags for X11, overriding pkg-config - X11_LIBS linker flags for X11, overriding pkg-config - XMKMF Path to xmkmf, Makefile generator for X Window System - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to <http://bugzilla.gnome.org/enter_bug.cgi?product=eog>. -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -eog configure 3.26.2 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case <limits.h> declares $2. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -( $as_echo "## ------------------------------------------------------------------ ## -## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=eog ## -## ------------------------------------------------------------------ ##" - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_mongrel -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by eog $as_me 3.26.2, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -gt_needs="$gt_needs " -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -am__api_version='1.15' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - if test "$2" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi - -rm -f conftest.file - -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='eog' - VERSION='3.26.2' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> -# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> -mkdir_p='$(MKDIR_P)' - -# We need awk for the "check" target (and possibly the TAP driver). The -# system "awk" is bad on some platforms. -# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AMTAR='$${TAR-tar}' - - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar pax cpio none' - -am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' - - - - - - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542> - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: <http://www.gnu.org/software/coreutils/>. - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 - fi -fi - - - - -# Support silencing the build output if supported (automake-1.11+) -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=0;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - - - -$as_echo "#define EOG_MAJOR_VERSION 3" >>confdefs.h - -EOG_MAJOR_VERSION=3 - - -$as_echo "#define EOG_MINOR_VERSION 26" >>confdefs.h - -EOG_MINOR_VERSION=26 - - -$as_echo "#define EOG_MICRO_VERSION 2" >>confdefs.h - -EOG_MICRO_VERSION=2 - - -EOG_API_VERSION=3.0 - - -ac_config_headers="$ac_config_headers config.h" - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 -$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } - # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then : - enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=yes -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 -$as_echo "$USE_MAINTAINER_MODE" >&6; } - if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' -else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= -fi - - MAINT=$MAINTAINER_MODE_TRUE - - - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdio.h> -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdarg.h> -#include <stdio.h> -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - - - - # Check whether --enable-compile-warnings was given. -if test "${enable_compile_warnings+set}" = set; then : - enableval=$enable_compile_warnings; -else - enable_compile_warnings="yes" -fi - - - if test "x$GCC" != xyes; then - enable_compile_warnings=no - fi - - warning_flags= - realsave_CFLAGS="$CFLAGS" - - base_warn_flags=" \ - -Wall \ - -Wstrict-prototypes \ - -Wnested-externs \ - " - - base_error_flags=" \ - -Werror=missing-prototypes \ - -Werror=implicit-function-declaration \ - -Werror=pointer-arith \ - -Werror=init-self \ - -Werror=format-security \ - -Werror=format=2 \ - -Werror=missing-include-dirs \ - -Werror=return-type \ - " - - additional_flags="" - - case "$enable_compile_warnings" in - no) - warning_flags="-w" - ;; - minimum) - warning_flags="-Wall" - ;; - yes|maximum|error) - warning_flags="$base_warn_flags $base_error_flags $additional_flags" - ;; - *) - as_fn_error $? "Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" "$LINENO" 5 - ;; - esac - - if test "$enable_compile_warnings" = "error" ; then - warning_flags="$warning_flags -Werror" - fi - - for option in $warning_flags; do - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $option" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether gcc understands $option" >&5 -$as_echo_n "checking whether gcc understands $option... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - has_option=yes -else - has_option=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_option" >&5 -$as_echo "$has_option" >&6; } - if test $has_option = yes; then - tested_warning_flags="$tested_warning_flags $option" - fi - unset has_option - unset save_CFLAGS - done - unset option - CFLAGS="$realsave_CFLAGS" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what warning flags to pass to the C compiler" >&5 -$as_echo_n "checking what warning flags to pass to the C compiler... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tested_warning_flags" >&5 -$as_echo "$tested_warning_flags" >&6; } - - # Check whether --enable-iso-c was given. -if test "${enable_iso_c+set}" = set; then : - enableval=$enable_iso_c; -else - enable_iso_c=no -fi - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what language compliance flags to pass to the C compiler" >&5 -$as_echo_n "checking what language compliance flags to pass to the C compiler... " >&6; } - complCFLAGS= - if test "x$enable_iso_c" != "xno"; then - if test "x$GCC" = "xyes"; then - case " $CFLAGS " in - *\ \ -ansi\ \ *) ;; - *) complCFLAGS="$complCFLAGS -ansi" ;; - esac - case " $CFLAGS " in - *\ \ -pedantic\ \ *) ;; - *) complCFLAGS="$complCFLAGS -pedantic" ;; - esac - fi - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $complCFLAGS" >&5 -$as_echo "$complCFLAGS" >&6; } - - WARN_CFLAGS="$tested_warning_flags $complCFLAGS" - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable debugging" >&5 -$as_echo_n "checking whether to enable debugging... " >&6; } - - - - - - # Check whether --enable-debug was given. -if test "${enable_debug+set}" = set; then : - enableval=$enable_debug; -else - enable_debug=no -fi - - if test "x$enable_debug" = "xyes" || test "x$enable_debug" = "x"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - CFLAGS="${CFLAGS} -g -O0" - CXXFLAGS="${CXXFLAGS} -g -O0" - FFLAGS="${FFLAGS} -g -O0" - FCFLAGS="${FCFLAGS} -g -O0" - OBJCFLAGS="${OBJCFLAGS} -g -O0" - - -$as_echo "#define GNOME_ENABLE_DEBUG /**/" >>confdefs.h - - else - if test "x$enable_debug" = "xinfo"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: info" >&5 -$as_echo "info" >&6; } - CFLAGS="${CFLAGS} -g" - CXXFLAGS="${CXXFLAGS} -g" - FFLAGS="${FFLAGS} -g" - FCFLAGS="${FCFLAGS} -g" - OBJCFLAGS="${OBJCFLAGS} -g" - elif test "x$enable_debug" = "xprofile"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: profile" >&5 -$as_echo "profile" >&6; } - CFLAGS="${CFLAGS} -g -pg" - CXXFLAGS="${CXXFLAGS} -g -pg" - FFLAGS="${FFLAGS} -g -pg" - FCFLAGS="${FCFLAGS} -g -pg" - OBJCFLAGS="${OBJCFLAGS} -g -pg" - LDFLAGS="${LDFLAGS} -pg" - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - if test "x${CFLAGS+set}" != "xset"; then - CFLAGS="" - fi - if test "x${CXXFLAGS+set}" != "xset"; then - CXXFLAGS="" - fi - if test "x${FFLAGS+set}" != "xset"; then - FFLAGS="" - fi - if test "x${FCFLAGS+set}" != "xset"; then - FCFLAGS="" - fi - if test "x${OBJCFLAGS+set}" != "xset"; then - OBJCFLAGS="" - fi - fi - - -$as_echo "#define NDEBUG /**/" >>confdefs.h - - fi - ax_enable_debug=$enable_debug - - - -# Disable building static archives by default - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.4.6' -macro_revision='2.4.6' - - - - - - - - - - - - - -ltmain=$ac_aux_dir/ltmain.sh - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case $ECHO in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_SED" || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_FGREP" || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - -test -z "$GREP" && GREP=grep - - - - - - - - - - - - - - - - - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test yes = "$GCC"; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return, which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD=$ac_prog - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test yes = "$with_gnu_ld"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD=$ac_dir/$ac_prog - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in - *GNU* | *'with BFD'*) - test no != "$with_gnu_ld" && break - ;; - *) - test yes != "$with_gnu_ld" && break - ;; - esac - fi - done - IFS=$lt_save_ifs -else - lt_cv_path_LD=$LD # Let the user override the test with a path. -fi -fi - -LD=$lt_cv_path_LD -if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 </dev/null` in -*GNU* | *'with BFD'*) - lt_cv_prog_gnu_ld=yes - ;; -*) - lt_cv_prog_gnu_ld=no - ;; -esac -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM=$NM -else - lt_nm_to_check=${ac_tool_prefix}nm - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/$lt_tmp_nm - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the 'sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty - case $build_os in - mingw*) lt_bad_file=conftest.nm/nofile ;; - *) lt_bad_file=/dev/null ;; - esac - case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in - *$lt_bad_file* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break 2 - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break 2 - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS=$lt_save_ifs - done - : ${lt_cv_path_NM=no} -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -if test no != "$lt_cv_path_NM"; then - NM=$lt_cv_path_NM -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -$as_echo "$ac_ct_DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi - - case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols -headers" - ;; - *) - DUMPBIN=: - ;; - esac - fi - - if test : != "$DUMPBIN"; then - NM=$DUMPBIN - fi -fi -test -z "$NM" && NM=nm - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -$as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -$as_echo "$lt_cv_nm_interface" >&6; } - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } -fi - -# find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : - $as_echo_n "(cached) " >&6 -else - i=0 - teststring=ABCD - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test X`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test 17 != "$i" # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - -fi - -if test -n "$lt_cv_sys_max_cmd_len"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } -fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - - -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi - - - - - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -$as_echo "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -if ${lt_cv_to_tool_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -$as_echo "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test yes != "$GCC"; then - reload_cmds=false - fi - ;; - darwin*) - if test yes = "$GCC"; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# 'unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# that responds to the $file_magic_cmd with a given extended regex. -# If you have 'file' or equivalent on your system and you're not sure -# whether 'pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd* | bitrig*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -os2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh; - # decide which one to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd=$ECHO - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - - - - - - - -if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AR" && break - done -fi -if test -z "$AR"; then - ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_AR" && break -done - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -fi - -: ${AR=ar} -: ${AR_FLAGS=cru} - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -$as_echo_n "checking for archiver @FILE support... " >&6; } -if ${lt_cv_ar_at_file+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test 0 -eq "$ac_status"; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test 0 -ne "$ac_status"; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -$as_echo "$lt_cv_ar_at_file" >&6; } - -if test no = "$lt_cv_ar_at_file"; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - bitrig* | openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : - $as_echo_n "(cached) " >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test ia64 = "$host_cpu"; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Gets list of data symbols to import. - lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" - # Adjust the below global symbol transforms to fixup imported variables. - lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" - lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" - lt_c_name_lib_hook="\ - -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ - -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" -else - # Disable hooks by default. - lt_cv_sys_global_symbol_to_import= - lt_cdecl_hook= - lt_c_name_hook= - lt_c_name_lib_hook= -fi - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n"\ -$lt_cdecl_hook\ -" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ -$lt_c_name_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" - -# Transform an extracted symbol line into symbol name with lib prefix and -# symbol address. -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ -$lt_c_name_lib_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function, - # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ -" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ -" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ -" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ -" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE -/* DATA imports from DLLs on WIN32 can't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined __osf__ -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS=conftstm.$ac_objext - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test yes = "$pipe_works"; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -$as_echo_n "checking for sysroot... " >&6; } - -# Check whether --with-sysroot was given. -if test "${with_sysroot+set}" = set; then : - withval=$with_sysroot; -else - with_sysroot=no -fi - - -lt_sysroot= -case $with_sysroot in #( - yes) - if test yes = "$GCC"; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 -$as_echo "$with_sysroot" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -$as_echo "${lt_sysroot:-no}" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 -$as_echo_n "checking for a working dd... " >&6; } -if ${ac_cv_path_lt_DD+:} false; then : - $as_echo_n "(cached) " >&6 -else - printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -: ${lt_DD:=$DD} -if test -z "$lt_DD"; then - ac_path_lt_DD_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in dd; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_lt_DD" || continue -if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: -fi - $ac_path_lt_DD_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_lt_DD"; then - : - fi -else - ac_cv_path_lt_DD=$lt_DD -fi - -rm -f conftest.i conftest2.i conftest.out -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 -$as_echo "$ac_cv_path_lt_DD" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 -$as_echo_n "checking how to truncate binary pipes... " >&6; } -if ${lt_cv_truncate_bin+:} false; then : - $as_echo_n "(cached) " >&6 -else - printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -lt_cv_truncate_bin= -if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" -fi -rm -f conftest.i conftest2.i conftest.out -test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 -$as_echo "$lt_cv_truncate_bin" >&6; } - - - - - - - -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -func_cc_basename () -{ - for cc_temp in $*""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac - done - func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -} - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : - enableval=$enable_libtool_lock; -fi - -test no = "$enable_libtool_lock" || enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out what ABI is being produced by ac_compile, and set mode - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE=32 - ;; - *ELF-64*) - HPUX_IA64_MODE=64 - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test yes = "$lt_cv_prog_gnu_ld"; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -mips64*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - emul=elf - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - emul="${emul}32" - ;; - *64-bit*) - emul="${emul}64" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *MSB*) - emul="${emul}btsmip" - ;; - *LSB*) - emul="${emul}ltsmip" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *N32*) - emul="${emul}n32" - ;; - esac - LD="${LD-ld} -m $emul" - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. Note that the listed cases only cover the - # situations where additional linker options are needed (such as when - # doing 32-bit compilation for a host where ld defaults to 64-bit, or - # vice versa); the common cases where no linker options are needed do - # not appear in the list. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - case `/usr/bin/file conftest.o` in - *x86-64*) - LD="${LD-ld} -m elf32_x86_64" - ;; - *) - LD="${LD-ld} -m elf_i386" - ;; - esac - ;; - powerpc64le-*linux*) - LD="${LD-ld} -m elf32lppclinux" - ;; - powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - powerpcle-*linux*) - LD="${LD-ld} -m elf64lppc" - ;; - powerpc-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS=$CFLAGS - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_cc_needs_belf=yes -else - lt_cv_cc_needs_belf=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test yes != "$lt_cv_cc_needs_belf"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS=$SAVE_CFLAGS - fi - ;; -*-*solaris*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*|x86_64-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD=${LD-ld}_sol2 - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks=$enable_libtool_lock - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -$as_echo "$MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL - fi -else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if ${lt_cv_path_mainfest_tool+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -$as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test yes != "$lt_cv_path_mainfest_tool"; then - MANIFEST_TOOL=: -fi - - - - - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "$LT_MULTI_MODULE"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&5 - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test 0 = "$_lt_result"; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if ${lt_cv_ld_force_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&5 - elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - 10.[012][,.]*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test yes = "$lt_cv_apple_cc_single_mod"; then - _lt_dar_single_mod='$single_module' - fi - if test yes = "$lt_cv_ld_exported_symbols_list"; then - _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' - fi - if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -# func_munge_path_list VARIABLE PATH -# ----------------------------------- -# VARIABLE is name of variable containing _space_ separated list of -# directories to be munged by the contents of PATH, which is string -# having a format: -# "DIR[:DIR]:" -# string "DIR[ DIR]" will be prepended to VARIABLE -# ":DIR[:DIR]" -# string "DIR[ DIR]" will be appended to VARIABLE -# "DIRP[:DIRP]::[DIRA:]DIRA" -# string "DIRP[ DIRP]" will be prepended to VARIABLE and string -# "DIRA[ DIRA]" will be appended to VARIABLE -# "DIR[:DIR]" -# VARIABLE will be replaced by "DIR[ DIR]" -func_munge_path_list () -{ - case x$2 in - x) - ;; - *:) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" - ;; - x:*) - eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" - ;; - *::*) - eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" - eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" - ;; - *) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" - ;; - esac -} - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdlib.h> -#include <stdarg.h> -#include <string.h> -#include <float.h> - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <string.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdlib.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <ctype.h> -#include <stdlib.h> -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DLFCN_H 1 -_ACEOF - -fi - -done - - - - - -# Set options -# Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_static=no -fi - - - - - - - - - - - enable_dlopen=no - - - enable_win32_dll=no - - - # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_shared=yes -fi - - - - - - - - - - - -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : - withval=$with_pic; lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $withval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - pic_mode=default -fi - - - - - - - - - # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_fast_install=yes -fi - - - - - - - - - shared_archive_member_spec= -case $host,$enable_shared in -power*-*-aix[5-9]*,yes) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 -$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } - -# Check whether --with-aix-soname was given. -if test "${with_aix_soname+set}" = set; then : - withval=$with_aix_soname; case $withval in - aix|svr4|both) - ;; - *) - as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 - ;; - esac - lt_cv_with_aix_soname=$with_aix_soname -else - if ${lt_cv_with_aix_soname+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_with_aix_soname=aix -fi - - with_aix_soname=$lt_cv_with_aix_soname -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 -$as_echo "$with_aix_soname" >&6; } - if test aix != "$with_aix_soname"; then - # For the AIX way of multilib, we name the shared archive member - # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', - # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. - # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, - # the AIX toolchain works better with OBJECT_MODE set (default 32). - if test 64 = "${OBJECT_MODE-32}"; then - shared_archive_member_spec=shr_64 - else - shared_archive_member_spec=shr - fi - fi - ;; -*) - with_aix_soname=aix - ;; -esac - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS=$ltmain - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -cat >>confdefs.h <<_ACEOF -#define LT_OBJDIR "$lt_cv_objdir/" -_ACEOF - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld=$lt_cv_prog_gnu_ld - -old_CC=$CC -old_CFLAGS=$CFLAGS - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -func_cc_basename $compiler -cc_basename=$func_cc_basename_result - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/${ac_tool_prefix}file"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac -fi - -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/file"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac -fi - -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC=$CC -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test yes = "$GCC"; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - - - if test yes = "$GCC"; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - lt_prog_compiler_pic='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - if test -n "$lt_prog_compiler_pic"; then - lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - case $cc_basename in - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='$wl-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - # old Intel for x86_64, which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ F* | *Sun*Fortran*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Intel*\ [CF]*Compiler*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - *Portland\ Group*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms that do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -$as_echo "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_pic_works"; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_static_works"; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links=nottested -if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test no = "$hard_links"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ' (' and ')$', so one must not match beginning or - # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', - # as well as any symbol that contains 'd'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test yes != "$GCC"; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd* | bitrig*) - with_gnu_ld=no - ;; - esac - - ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test yes = "$with_gnu_ld"; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test yes = "$lt_use_gnu_ld_interface"; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='$wl' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - export_dynamic_flag_spec='$wl--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test ia64 != "$host_cpu"; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='$wl--export-all-symbols' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file, use it as - # is; otherwise, prepend EXPORTS... - archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - shrext_cmds=.dll - archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - enable_shared_with_static_runtimes=yes - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - export_dynamic_flag_spec='$wl-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test linux-dietlibc = "$host_os"; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test no = "$tmp_diet" - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - nagfor*) # NAGFOR 5.3 - tmp_sharedflag='-Wl,-shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - compiler_needs_object=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - - if test yes = "$supports_anon_versioning"; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - tcc*) - export_dynamic_flag_spec='-rdynamic' - ;; - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test yes = "$supports_anon_versioning"; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test no = "$ld_shlibs"; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test ia64 = "$host_cpu"; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag= - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to GNU nm, but means don't demangle to AIX nm. - # Without the "-l" option, or with the "-B" option, AIX nm treats - # weak defined symbols like other global defined symbols, whereas - # GNU nm marks them as "W". - # While the 'weak' keyword is ignored in the Export File, we need - # it in the Import File for the 'aix-soname' feature, so we have - # to replace the "-B" option with "-P" for AIX nm. - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # have runtime linking enabled, and use it for executables. - # For shared libraries, we enable/disable runtime linking - # depending on the kind of the shared library created - - # when "with_aix_soname,aix_use_runtimelinking" is: - # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables - # "aix,yes" lib.so shared, rtl:yes, for executables - # lib.a static archive - # "both,no" lib.so.V(shr.o) shared, rtl:yes - # lib.a(lib.so.V) shared, rtl:no, for executables - # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a(lib.so.V) shared, rtl:no - # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a static archive - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then - aix_use_runtimelinking=yes - break - fi - done - if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then - # With aix-soname=svr4, we create the lib.so.V shared archives only, - # so we don't have lib.a shared libs to link our executables. - # We have to force runtime linking in this case. - aix_use_runtimelinking=yes - LDFLAGS="$LDFLAGS -Wl,-brtl" - fi - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='$wl-f,' - case $with_aix_soname,$aix_use_runtimelinking in - aix,*) ;; # traditional, no import file - svr4,* | *,yes) # use import file - # The Import File defines what to hardcode. - hardcode_direct=no - hardcode_direct_absolute=no - ;; - esac - - if test yes = "$GCC"; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`$CC -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test yes = "$aix_use_runtimelinking"; then - shared_flag="$shared_flag "'$wl-G' - fi - # Need to ensure runtime linking is disabled for the traditional - # shared library, or the linker may eventually find shared libraries - # /with/ Import File - we do not want to mix them. - shared_flag_aix='-shared' - shared_flag_svr4='-shared $wl-G' - else - # not using gcc - if test ia64 = "$host_cpu"; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test yes = "$aix_use_runtimelinking"; then - shared_flag='$wl-G' - else - shared_flag='$wl-bM:SRE' - fi - shared_flag_aix='$wl-bM:SRE' - shared_flag_svr4='$wl-G' - fi - fi - - export_dynamic_flag_spec='$wl-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=/usr/lib:/lib - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag - else - if test ia64 = "$host_cpu"; then - hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=/usr/lib:/lib - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' $wl-bernotok' - allow_undefined_flag=' $wl-berok' - if test yes = "$with_gnu_ld"; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi - archive_cmds_need_lc=yes - archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' - # -brtl affects multiple linker settings, -berok does not and is overridden later - compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' - if test svr4 != "$with_aix_soname"; then - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' - fi - if test aix != "$with_aix_soname"; then - archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' - else - # used by -dlpreopen to get the symbols - archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' - fi - archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' - archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then - cp "$export_symbols" "$output_objdir/$soname.def"; - echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; - else - $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile=$lt_outputfile.exe - lt_tool_outputfile=$lt_tool_outputfile.exe - ;; - esac~ - if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - if test yes = "$lt_cv_ld_force_load"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - - else - whole_archive_flag_spec='' - fi - link_all_deplibs=yes - allow_undefined_flag=$_lt_dar_allow_undefined - case $cc_basename in - ifort*|nagfor*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test yes = "$_lt_dar_can_shared"; then - output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" - archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" - module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test yes = "$GCC"; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='$wl-E' - ;; - - hpux10*) - if test yes,no = "$GCC,$with_gnu_ld"; then - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test no = "$with_gnu_ld"; then - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='$wl-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test yes,no = "$GCC,$with_gnu_ld"; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if ${lt_cv_prog_compiler__b+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } - -if test yes = "$lt_cv_prog_compiler__b"; then - archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - - ;; - esac - fi - if test no = "$with_gnu_ld"; then - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='$wl-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test yes = "$GCC"; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes -else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test yes = "$lt_cv_irix_exported_symbol"; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' - fi - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - linux*) - case $cc_basename in - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - ld_shlibs=yes - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd* | bitrig*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - export_dynamic_flag_spec='$wl-E' - else - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - shrext_cmds=.dll - archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - enable_shared_with_static_runtimes=yes - ;; - - osf3*) - if test yes = "$GCC"; then - allow_undefined_flag=' $wl-expect_unresolved $wl\*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test yes = "$GCC"; then - allow_undefined_flag=' $wl-expect_unresolved $wl\*' - archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test yes = "$GCC"; then - wlarc='$wl' - archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='$wl' - archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands '-z linker_flag'. GCC discards it without '$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test yes = "$GCC"; then - whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test sequent = "$host_vendor"; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='$wl-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We CANNOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='$wl-z,text' - allow_undefined_flag='$wl-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='$wl-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='$wl-Bexport' - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test sni = "$host_vendor"; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='$wl-Blargedynsym' - ;; - esac - fi - fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test no = "$ld_shlibs" && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test yes,yes = "$GCC,$enable_shared"; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } - -if test yes = "$GCC"; then - case $host_os in - darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; - *) lt_awk_arg='/^libraries:/' ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; - *) lt_sed_strip_eq='s|=/|/|g' ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary... - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - # ...but if some path component already ends with the multilib dir we assume - # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). - case "$lt_multi_os_dir; $lt_search_path_spec " in - "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) - lt_multi_os_dir= - ;; - esac - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" - elif test -n "$lt_multi_os_dir"; then - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS = " "; FS = "/|\n";} { - lt_foo = ""; - lt_count = 0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo = "/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's|/\([A-Za-z]:\)|\1|g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=.so -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - - - -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='$libname$release$shared_ext$major' - ;; - -aix[4-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test ia64 = "$host_cpu"; then - # AIX 5 supports IA64 - library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line '#! .'. This would cause the generated library to - # depend on '.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # Using Import Files as archive members, it is possible to support - # filename-based versioning of shared library archives on AIX. While - # this would work for both with and without runtime linking, it will - # prevent static linking of such archives. So we do filename-based - # shared library versioning with .so extension only, which is used - # when both runtime linking and shared linking is enabled. - # Unfortunately, runtime linking may impact performance, so we do - # not want this to be the default eventually. Also, we use the - # versioned .so libs for executables only if there is the -brtl - # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. - # To allow for filename-based versioning support, we need to create - # libNAME.so.V as an archive file, containing: - # *) an Import File, referring to the versioned filename of the - # archive as well as the shared archive member, telling the - # bitwidth (32 or 64) of that shared object, and providing the - # list of exported symbols of that shared object, eventually - # decorated with the 'weak' keyword - # *) the shared object with the F_LOADONLY flag set, to really avoid - # it being seen by the linker. - # At run time we better use the real file rather than another symlink, - # but for link time we create the symlink libNAME.so -> libNAME.so.V - - case $with_aix_soname,$aix_use_runtimelinking in - # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - aix,yes) # traditional libtool - dynamic_linker='AIX unversionable lib.so' - # If using run time linking (on AIX 4.2 or later) use lib<name>.so - # instead of lib<name>.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - aix,no) # traditional AIX only - dynamic_linker='AIX lib.a(lib.so.V)' - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - ;; - svr4,*) # full svr4 only - dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,yes) # both, prefer svr4 - dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # unpreferred sharedlib libNAME.a needs extra handling - postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' - postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,no) # both, prefer aix - dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling - postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' - postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' - ;; - esac - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='$libname$shared_ext' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - library_names_spec='$libname.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec=$LIB - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' - soname_spec='$libname$release$major$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - if test 32 = "$HPUX_IA64_MODE"; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - sys_lib_dlsearch_path_spec=/usr/lib/hpux32 - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - sys_lib_dlsearch_path_spec=/usr/lib/hpux64 - fi - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[3-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test yes = "$lt_cv_prog_gnu_ld"; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" - sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -linux*android*) - version_type=none # Android doesn't support versioned libraries. - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext' - soname_spec='$libname$release$shared_ext' - finish_cmds= - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - dynamic_linker='Android linker' - # Don't embed -rpath directories since the linker doesn't support them. - hardcode_libdir_flag_spec='-L$libdir' - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - -fi - - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Add ABI-specific directories to the system library path. - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" - - # Ideally, we could use ldconfig to report *all* directores which are - # searched for libraries, however this is still not possible. Aside from not - # being certain /sbin/ldconfig is available, command - # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, - # even though it is searched at run-time. Try to do the best guess by - # appending ld.so.conf contents (and includes) to the search path. - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd* | bitrig*) - version_type=sunos - sys_lib_dlsearch_path_spec=/usr/lib - need_lib_prefix=no - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - need_version=no - else - need_version=yes - fi - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -os2*) - libname_spec='$name' - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - # OS/2 can only load a DLL with a base name of 8 characters or less. - soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; - v=$($ECHO $release$versuffix | tr -d .-); - n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); - $ECHO $n$v`$shared_ext' - library_names_spec='${libname}_dll.$libext' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=BEGINLIBPATH - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test yes = "$with_gnu_ld"; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec; then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' - soname_spec='$libname$shared_ext.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=sco - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test yes = "$with_gnu_ld"; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test no = "$dynamic_linker" && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test yes = "$GCC"; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then - sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec -fi - -if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then - sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec -fi - -# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... -configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec - -# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code -func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" - -# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool -configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test yes = "$hardcode_automatic"; then - - # We can hardcode non-existent directories. - if test no != "$hardcode_direct" && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && - test no != "$hardcode_minus_L"; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } - -if test relink = "$hardcode_action" || - test yes = "$inherit_rpath"; then - # Fast installation is not supported - enable_fast_install=no -elif test yes = "$shlibpath_overrides_runpath" || - test no = "$enable_shared"; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test yes != "$enable_dlopen"; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen=load_add_on - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen=LoadLibrary - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else - - lt_cv_dlopen=dyld - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - tpf*) - # Don't try to run any link tests for TPF. We know it's impossible - # because TPF is a cross-compiler, and we know how we open DSOs. - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - lt_cv_dlopen_self=no - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen=shl_load -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld -else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen=dlopen -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_svld_dlopen=yes -else - ac_cv_lib_svld_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_dld_link=yes -else - ac_cv_lib_dld_dld_link=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test no = "$lt_cv_dlopen"; then - enable_dlopen=no - else - enable_dlopen=yes - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS=$CPPFLAGS - test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS=$LDFLAGS - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS=$LIBS - LIBS="$lt_cv_dlopen_libs $LIBS" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test yes = "$cross_compiling"; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - - if test yes = "$lt_cv_dlopen_self"; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test yes = "$cross_compiling"; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS=$save_CPPFLAGS - LDFLAGS=$save_LDFLAGS - LIBS=$save_LIBS - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP"; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report what library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC=$lt_save_CC - - - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdarg.h> -#include <stdio.h> -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - -# Extract the first word of "glib-compile-resources", so it can be a program name with args. -set dummy glib-compile-resources; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GLIB_COMPILE_RESOURCES+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GLIB_COMPILE_RESOURCES in - [\\/]* | ?:[\\/]*) - ac_cv_path_GLIB_COMPILE_RESOURCES="$GLIB_COMPILE_RESOURCES" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GLIB_COMPILE_RESOURCES="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GLIB_COMPILE_RESOURCES=$ac_cv_path_GLIB_COMPILE_RESOURCES -if test -n "$GLIB_COMPILE_RESOURCES"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_RESOURCES" >&5 -$as_echo "$GLIB_COMPILE_RESOURCES" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "glib-genmarshal", so it can be a program name with args. -set dummy glib-genmarshal; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GLIB_GENMARSHAL+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GLIB_GENMARSHAL in - [\\/]* | ?:[\\/]*) - ac_cv_path_GLIB_GENMARSHAL="$GLIB_GENMARSHAL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL -if test -n "$GLIB_GENMARSHAL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_GENMARSHAL" >&5 -$as_echo "$GLIB_GENMARSHAL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "glib-mkenums", so it can be a program name with args. -set dummy glib-mkenums; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GLIB_MKENUMS+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GLIB_MKENUMS in - [\\/]* | ?:[\\/]*) - ac_cv_path_GLIB_MKENUMS="$GLIB_MKENUMS" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GLIB_MKENUMS="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GLIB_MKENUMS=$ac_cv_path_GLIB_MKENUMS -if test -n "$GLIB_MKENUMS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_MKENUMS" >&5 -$as_echo "$GLIB_MKENUMS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - - - - - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi -fi - - - - - gtk_doc_requires="gtk-doc >= 1.16" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gtk-doc" >&5 -$as_echo_n "checking for gtk-doc... " >&6; } - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$gtk_doc_requires\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$gtk_doc_requires") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - have_gtk_doc=yes -else - have_gtk_doc=no -fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_gtk_doc" >&5 -$as_echo "$have_gtk_doc" >&6; } - - if test "$have_gtk_doc" = "no"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: - You will not be able to create source packages with 'make dist' - because $gtk_doc_requires is not found." >&5 -$as_echo "$as_me: WARNING: - You will not be able to create source packages with 'make dist' - because $gtk_doc_requires is not found." >&2;} - fi - - # Extract the first word of "gtkdoc-check", so it can be a program name with args. -set dummy gtkdoc-check; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_GTKDOC_CHECK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$GTKDOC_CHECK"; then - ac_cv_prog_GTKDOC_CHECK="$GTKDOC_CHECK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_GTKDOC_CHECK="gtkdoc-check.test" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -GTKDOC_CHECK=$ac_cv_prog_GTKDOC_CHECK -if test -n "$GTKDOC_CHECK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK" >&5 -$as_echo "$GTKDOC_CHECK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - # Extract the first word of "gtkdoc-check", so it can be a program name with args. -set dummy gtkdoc-check; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GTKDOC_CHECK_PATH+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GTKDOC_CHECK_PATH in - [\\/]* | ?:[\\/]*) - ac_cv_path_GTKDOC_CHECK_PATH="$GTKDOC_CHECK_PATH" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GTKDOC_CHECK_PATH="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GTKDOC_CHECK_PATH=$ac_cv_path_GTKDOC_CHECK_PATH -if test -n "$GTKDOC_CHECK_PATH"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK_PATH" >&5 -$as_echo "$GTKDOC_CHECK_PATH" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - for ac_prog in gtkdoc-rebase -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GTKDOC_REBASE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GTKDOC_REBASE in - [\\/]* | ?:[\\/]*) - ac_cv_path_GTKDOC_REBASE="$GTKDOC_REBASE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GTKDOC_REBASE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GTKDOC_REBASE=$ac_cv_path_GTKDOC_REBASE -if test -n "$GTKDOC_REBASE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_REBASE" >&5 -$as_echo "$GTKDOC_REBASE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$GTKDOC_REBASE" && break -done -test -n "$GTKDOC_REBASE" || GTKDOC_REBASE="true" - - # Extract the first word of "gtkdoc-mkpdf", so it can be a program name with args. -set dummy gtkdoc-mkpdf; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GTKDOC_MKPDF+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GTKDOC_MKPDF in - [\\/]* | ?:[\\/]*) - ac_cv_path_GTKDOC_MKPDF="$GTKDOC_MKPDF" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GTKDOC_MKPDF="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GTKDOC_MKPDF=$ac_cv_path_GTKDOC_MKPDF -if test -n "$GTKDOC_MKPDF"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_MKPDF" >&5 -$as_echo "$GTKDOC_MKPDF" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - -# Check whether --with-html-dir was given. -if test "${with_html_dir+set}" = set; then : - withval=$with_html_dir; -else - with_html_dir='${datadir}/gtk-doc/html' -fi - - HTML_DIR="$with_html_dir" - - - # Check whether --enable-gtk-doc was given. -if test "${enable_gtk_doc+set}" = set; then : - enableval=$enable_gtk_doc; -else - enable_gtk_doc=no -fi - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build gtk-doc documentation" >&5 -$as_echo_n "checking whether to build gtk-doc documentation... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_gtk_doc" >&5 -$as_echo "$enable_gtk_doc" >&6; } - - if test "x$enable_gtk_doc" = "xyes" && test "$have_gtk_doc" = "no"; then - as_fn_error $? " - You must have $gtk_doc_requires installed to build documentation for - $PACKAGE_NAME. Please install gtk-doc or disable building the - documentation by adding '--disable-gtk-doc' to '$0'." "$LINENO" 5 - fi - - if test "x$PACKAGE_NAME" != "xglib"; then - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTKDOC_DEPS" >&5 -$as_echo_n "checking for GTKDOC_DEPS... " >&6; } - -if test -n "$GTKDOC_DEPS_CFLAGS"; then - pkg_cv_GTKDOC_DEPS_CFLAGS="$GTKDOC_DEPS_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GTKDOC_DEPS_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$GTKDOC_DEPS_LIBS"; then - pkg_cv_GTKDOC_DEPS_LIBS="$GTKDOC_DEPS_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GTKDOC_DEPS_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - GTKDOC_DEPS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>&1` - else - GTKDOC_DEPS_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$GTKDOC_DEPS_PKG_ERRORS" >&5 - - : -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - : -else - GTKDOC_DEPS_CFLAGS=$pkg_cv_GTKDOC_DEPS_CFLAGS - GTKDOC_DEPS_LIBS=$pkg_cv_GTKDOC_DEPS_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - fi - - # Check whether --enable-gtk-doc-html was given. -if test "${enable_gtk_doc_html+set}" = set; then : - enableval=$enable_gtk_doc_html; -else - enable_gtk_doc_html=yes -fi - - # Check whether --enable-gtk-doc-pdf was given. -if test "${enable_gtk_doc_pdf+set}" = set; then : - enableval=$enable_gtk_doc_pdf; -else - enable_gtk_doc_pdf=no -fi - - - if test -z "$GTKDOC_MKPDF"; then - enable_gtk_doc_pdf=no - fi - - if test -z "$AM_DEFAULT_VERBOSITY"; then - AM_DEFAULT_VERBOSITY=1 - fi - - - if test x$have_gtk_doc = xyes; then - HAVE_GTK_DOC_TRUE= - HAVE_GTK_DOC_FALSE='#' -else - HAVE_GTK_DOC_TRUE='#' - HAVE_GTK_DOC_FALSE= -fi - - if test x$enable_gtk_doc = xyes; then - ENABLE_GTK_DOC_TRUE= - ENABLE_GTK_DOC_FALSE='#' -else - ENABLE_GTK_DOC_TRUE='#' - ENABLE_GTK_DOC_FALSE= -fi - - if test x$enable_gtk_doc_html = xyes; then - GTK_DOC_BUILD_HTML_TRUE= - GTK_DOC_BUILD_HTML_FALSE='#' -else - GTK_DOC_BUILD_HTML_TRUE='#' - GTK_DOC_BUILD_HTML_FALSE= -fi - - if test x$enable_gtk_doc_pdf = xyes; then - GTK_DOC_BUILD_PDF_TRUE= - GTK_DOC_BUILD_PDF_FALSE='#' -else - GTK_DOC_BUILD_PDF_TRUE='#' - GTK_DOC_BUILD_PDF_FALSE= -fi - - if test -n "$LIBTOOL"; then - GTK_DOC_USE_LIBTOOL_TRUE= - GTK_DOC_USE_LIBTOOL_FALSE='#' -else - GTK_DOC_USE_LIBTOOL_TRUE='#' - GTK_DOC_USE_LIBTOOL_FALSE= -fi - - if test -n "$GTKDOC_REBASE"; then - GTK_DOC_USE_REBASE_TRUE= - GTK_DOC_USE_REBASE_FALSE='#' -else - GTK_DOC_USE_REBASE_TRUE='#' - GTK_DOC_USE_REBASE_FALSE= -fi - - - -for ac_func in strptime -do : - ac_fn_c_check_func "$LINENO" "strptime" "ac_cv_func_strptime" -if test "x$ac_cv_func_strptime" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_STRPTIME 1 -_ACEOF - -fi -done - - -# **************************************************************** -# Support for nl_langinfo (_NL_MEASUREMENT_MEASUREMENT) (optional) -# **************************************************************** -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _NL_MEASUREMENT_MEASUREMENT" >&5 -$as_echo_n "checking for _NL_MEASUREMENT_MEASUREMENT... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <langinfo.h> -int -main () -{ - - char c; - c = *((unsigned char *) nl_langinfo(_NL_MEASUREMENT_MEASUREMENT)); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - have_langinfo_measurement=yes -else - have_langinfo_measurement=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_langinfo_measurement" >&5 -$as_echo "$have_langinfo_measurement" >&6; } -if test "$have_langinfo_measurement" = "yes"; then - -$as_echo "#define HAVE__NL_MEASUREMENT_MEASUREMENT 1" >>confdefs.h - -fi - -# *********** -# Translation -# *********** - -GETTEXT_PACKAGE=eog - - -cat >>confdefs.h <<_ACEOF -#define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" -_ACEOF - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 -$as_echo_n "checking whether NLS is requested... " >&6; } - # Check whether --enable-nls was given. -if test "${enable_nls+set}" = set; then : - enableval=$enable_nls; USE_NLS=$enableval -else - USE_NLS=yes -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 -$as_echo "$USE_NLS" >&6; } - - - - - GETTEXT_MACRO_VERSION=0.19 - - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$MSGFMT" in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" - ;; -esac -fi -MSGFMT="$ac_cv_path_MSGFMT" -if test "$MSGFMT" != ":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 -$as_echo "$MSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - # Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GMSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 -$as_echo "$GMSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; - *) MSGFMT_015=$MSGFMT ;; - esac - - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XGETTEXT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$XGETTEXT" in - [\\/]* | ?:[\\/]*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; -esac -fi -XGETTEXT="$ac_cv_path_XGETTEXT" -if test "$XGETTEXT" != ":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 -$as_echo "$XGETTEXT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - rm -f messages.po - - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "msgmerge", so it can be a program name with args. -set dummy msgmerge; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGMERGE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$MSGMERGE" in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then - ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" - ;; -esac -fi -MSGMERGE="$ac_cv_path_MSGMERGE" -if test "$MSGMERGE" != ":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 -$as_echo "$MSGMERGE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$localedir" || localedir='${datadir}/locale' - - - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - - - ac_config_commands="$ac_config_commands po-directories" - - - - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` - while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${acl_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$acl_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break - ;; - *) - test "$with_gnu_ld" != yes && break - ;; - esac - fi - done - IFS="$acl_save_ifs" -else - acl_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$acl_cv_path_LD" -if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${acl_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 </dev/null` in -*GNU* | *'with BFD'*) - acl_cv_prog_gnu_ld=yes - ;; -*) - acl_cv_prog_gnu_ld=no - ;; -esac -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5 -$as_echo "$acl_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$acl_cv_prog_gnu_ld - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 -$as_echo_n "checking for shared library run path origin... " >&6; } -if ${acl_cv_rpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 -$as_echo "$acl_cv_rpath" >&6; } - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - # Check whether --enable-rpath was given. -if test "${enable_rpath+set}" = set; then : - enableval=$enable_rpath; : -else - enable_rpath=yes -fi - - - - - acl_libdirstem=lib - acl_libdirstem2= - case "$host_os" in - solaris*) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5 -$as_echo_n "checking for 64-bit host... " >&6; } -if ${gl_cv_solaris_64bit+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef _LP64 -sixtyfour bits -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "sixtyfour bits" >/dev/null 2>&1; then : - gl_cv_solaris_64bit=yes -else - gl_cv_solaris_64bit=no -fi -rm -f conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5 -$as_echo "$gl_cv_solaris_64bit" >&6; } - if test $gl_cv_solaris_64bit = yes; then - acl_libdirstem=lib/64 - case "$host_cpu" in - sparc*) acl_libdirstem2=lib/sparcv9 ;; - i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; - esac - fi - ;; - *) - searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; - */../ | */.. ) - # Better ignore directories of this form. They are misleading. - ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib64 ) acl_libdirstem=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - fi - ;; - esac - test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" - - - - - - - - - - - - - use_additional=yes - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - -# Check whether --with-libiconv-prefix was given. -if test "${with_libiconv_prefix+set}" = set; then : - withval=$with_libiconv_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi - -fi - - LIBICONV= - LTLIBICONV= - INCICONV= - LIBICONV_PREFIX= - HAVE_LIBICONV= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='iconv ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" - ;; - esac - done - fi - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" - done - fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 -$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; } -if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then : - $as_echo_n "(cached) " >&6 -else - gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <CoreFoundation/CFPreferences.h> -int -main () -{ -CFPreferencesCopyAppValue(NULL, NULL) - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - gt_cv_func_CFPreferencesCopyAppValue=yes -else - gt_cv_func_CFPreferencesCopyAppValue=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gt_save_LIBS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 -$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } - if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then - -$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h - - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5 -$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; } -if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then : - $as_echo_n "(cached) " >&6 -else - gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <CoreFoundation/CFLocale.h> -int -main () -{ -CFLocaleCopyCurrent(); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - gt_cv_func_CFLocaleCopyCurrent=yes -else - gt_cv_func_CFLocaleCopyCurrent=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gt_save_LIBS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 -$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; } - if test $gt_cv_func_CFLocaleCopyCurrent = yes; then - -$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h - - fi - INTL_MACOSX_LIBS= - if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then - INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" - fi - - - - - - - LIBINTL= - LTLIBINTL= - POSUB= - - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 -$as_echo_n "checking for GNU gettext in libc... " >&6; } -if eval \${$gt_func_gnugettext_libc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <libintl.h> -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings; - -int -main () -{ - -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$gt_func_gnugettext_libc=yes" -else - eval "$gt_func_gnugettext_libc=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$gt_func_gnugettext_libc - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - - - - - - am_save_CPPFLAGS="$CPPFLAGS" - - for element in $INCICONV; do - haveit= - for x in $CPPFLAGS; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 -$as_echo_n "checking for iconv... " >&6; } -if ${am_cv_func_iconv+:} false; then : - $as_echo_n "(cached) " >&6 -else - - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <stdlib.h> -#include <iconv.h> - -int -main () -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - am_cv_func_iconv=yes -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <stdlib.h> -#include <iconv.h> - -int -main () -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - am_cv_lib_iconv=yes - am_cv_func_iconv=yes -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$am_save_LIBS" - fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 -$as_echo "$am_cv_func_iconv" >&6; } - if test "$am_cv_func_iconv" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 -$as_echo_n "checking for working iconv... " >&6; } -if ${am_cv_func_iconv_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - am_cv_func_iconv_works=no - for ac_iconv_const in '' 'const'; do - if test "$cross_compiling" = yes; then : - case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <iconv.h> -#include <string.h> - -#ifndef ICONV_CONST -# define ICONV_CONST $ac_iconv_const -#endif - -int -main () -{ -int result = 0; - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 1; - iconv_close (cd_utf8_to_88591); - } - } - /* Test against Solaris 10 bug: Failures are not distinguishable from - successful returns. */ - { - iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); - if (cd_ascii_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\263"; - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_ascii_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 2; - iconv_close (cd_ascii_to_88591); - } - } - /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304"; - static char buf[2] = { (char)0xDE, (char)0xAD }; - ICONV_CONST char *inptr = input; - size_t inbytesleft = 1; - char *outptr = buf; - size_t outbytesleft = 1; - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) - result |= 4; - iconv_close (cd_88591_to_utf8); - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - result |= 8; - iconv_close (cd_88591_to_utf8); - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - if (/* Try standardized names. */ - iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) - /* Try IRIX, OSF/1 names. */ - && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) - /* Try AIX names. */ - && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) - /* Try HP-UX names. */ - && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) - result |= 16; - return result; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - am_cv_func_iconv_works=yes -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - test "$am_cv_func_iconv_works" = no || break - done - LIBS="$am_save_LIBS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 -$as_echo "$am_cv_func_iconv_works" >&6; } - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - -$as_echo "#define HAVE_ICONV 1" >>confdefs.h - - fi - if test "$am_cv_lib_iconv" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 -$as_echo_n "checking how to link with libiconv... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 -$as_echo "$LIBICONV" >&6; } - else - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - - - - - - - - - - - - use_additional=yes - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - -# Check whether --with-libintl-prefix was given. -if test "${with_libintl_prefix+set}" = set; then : - withval=$with_libintl_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi - -fi - - LIBINTL= - LTLIBINTL= - INCINTL= - LIBINTL_PREFIX= - HAVE_LIBINTL= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='intl ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = 'intl'; then - LIBINTL_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = 'intl'; then - LIBINTL_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" - ;; - esac - done - fi - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" - done - fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 -$as_echo_n "checking for GNU gettext in libintl... " >&6; } -if eval \${$gt_func_gnugettext_libintl+:} false; then : - $as_echo_n "(cached) " >&6 -else - gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <libintl.h> -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); - -int -main () -{ - -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$gt_func_gnugettext_libintl=yes" -else - eval "$gt_func_gnugettext_libintl=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <libintl.h> -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); - -int -main () -{ - -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - eval "$gt_func_gnugettext_libintl=yes" - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS" -fi -eval ac_res=\$$gt_func_gnugettext_libintl - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - fi - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - -$as_echo "#define ENABLE_NLS 1" >>confdefs.h - - else - USE_NLS=no - fi - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5 -$as_echo_n "checking whether to use NLS... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 -$as_echo "$USE_NLS" >&6; } - if test "$USE_NLS" = "yes"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5 -$as_echo_n "checking where the gettext function comes from... " >&6; } - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5 -$as_echo "$gt_source" >&6; } - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5 -$as_echo_n "checking how to link with libintl... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5 -$as_echo "$LIBINTL" >&6; } - - for element in $INCINTL; do - haveit= - for x in $CPPFLAGS; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - fi - - -$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h - - -$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h - - fi - - POSUB=po - fi - - - - INTLLIBS="$LIBINTL" - - - - - - - - - - -# *************** -# User documentation -# *************** - - - - - - -YELP_LC_MEDIA_LINKS=true -YELP_LC_DIST=true - -for yelpopt in ; do - case $yelpopt in - lc-media-links) YELP_LC_MEDIA_LINKS=true ;; - no-lc-media-links) YELP_LC_MEDIA_LINKS= ;; - lc-dist) YELP_LC_DIST=true ;; - no-lc-dist) YELP_LC_DIST= ;; - *) as_fn_error $? "Unrecognized YELP_HELP_INIT option $yelpopt\"" "$LINENO" 5 ;; - esac -done; - - - - -# Check whether --with-help-dir was given. -if test "${with_help_dir+set}" = set; then : - withval=$with_help_dir; -else - with_help_dir='${datadir}/help' -fi - -HELP_DIR="$with_help_dir" - - - -# Extract the first word of "itstool", so it can be a program name with args. -set dummy itstool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ITSTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ITSTOOL"; then - ac_cv_prog_ITSTOOL="$ITSTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ITSTOOL="itstool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ITSTOOL=$ac_cv_prog_ITSTOOL -if test -n "$ITSTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ITSTOOL" >&5 -$as_echo "$ITSTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test x"$ITSTOOL" = x; then - as_fn_error $? "itstool not found" "$LINENO" 5 -fi - - -# Extract the first word of "xmllint", so it can be a program name with args. -set dummy xmllint; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_XMLLINT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$XMLLINT"; then - ac_cv_prog_XMLLINT="$XMLLINT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_XMLLINT="xmllint" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -XMLLINT=$ac_cv_prog_XMLLINT -if test -n "$XMLLINT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XMLLINT" >&5 -$as_echo "$XMLLINT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test x"$XMLLINT" = x; then - as_fn_error $? "xmllint not found" "$LINENO" 5 -fi - -YELP_HELP_RULES=' -HELP_ID ?= -HELP_POT ?= -HELP_FILES ?= -HELP_EXTRA ?= -HELP_MEDIA ?= -HELP_LINGUAS ?= - -_HELP_LINGUAS = $(if $(filter environment,$(origin LINGUAS)),$(filter $(LINGUAS),$(HELP_LINGUAS)),$(HELP_LINGUAS)) -_HELP_POTFILE = $(if $(HELP_POT),$(HELP_POT),$(if $(HELP_ID),$(HELP_ID).pot)) -_HELP_POFILES = $(if $(HELP_ID),$(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).po)) -_HELP_MOFILES = $(patsubst %.po,%.mo,$(_HELP_POFILES)) -_HELP_C_FILES = $(foreach f,$(HELP_FILES),C/$(f)) -_HELP_C_EXTRA = $(foreach f,$(HELP_EXTRA),C/$(f)) -_HELP_C_MEDIA = $(foreach f,$(HELP_MEDIA),C/$(f)) -_HELP_LC_FILES = $(foreach lc,$(_HELP_LINGUAS),$(foreach f,$(HELP_FILES),$(lc)/$(f))) -_HELP_LC_STAMPS = $(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).stamp) - -_HELP_DEFAULT_V = $(if $(AM_DEFAULT_VERBOSITY),$(AM_DEFAULT_VERBOSITY),1) -_HELP_V = $(if $(V),$(V),$(_HELP_DEFAULT_V)) -_HELP_LC_VERBOSE = $(_HELP_LC_VERBOSE_$(_HELP_V)) -_HELP_LC_VERBOSE_ = $(_HELP_LC_VERBOSE_$(_HELP_DEFAULT_V)) -_HELP_LC_VERBOSE_0 = @echo " GEN "$(dir $@); - -all: $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) $(_HELP_LC_FILES) $(_HELP_POFILES) - -.PHONY: pot -pot: $(_HELP_POTFILE) -$(_HELP_POTFILE): $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) - $(AM_V_GEN)if test -d "C"; then d=; else d="$(srcdir)/"; fi; \ - $(ITSTOOL) -o "$@" $(foreach f,$(_HELP_C_FILES),"$${d}$(f)") - -.PHONY: repo -repo: $(_HELP_POTFILE) - $(AM_V_at)for po in $(_HELP_POFILES); do \ - if test "x$(_HELP_V)" = "x0"; then echo " GEN $${po}"; fi; \ - msgmerge -q -o "$${po}" "$${po}" "$(_HELP_POTFILE)"; \ - done - -$(_HELP_POFILES): - $(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi - $(AM_V_at)if test ! -f "$@" -a -f "$(srcdir)/$@"; then cp "$(srcdir)/$@" "$@"; fi - $(AM_V_GEN)if ! test -f "$@"; then \ - (cd "$(dir $@)" && \ - $(ITSTOOL) -o "$(notdir $@).tmp" $(_HELP_C_FILES) && \ - mv "$(notdir $@).tmp" "$(notdir $@)"); \ - else \ - (cd "$(dir $@)" && \ - $(ITSTOOL) -o "$(notdir $@).tmp" $(_HELP_C_FILES) && \ - msgmerge -o "$(notdir $@)" "$(notdir $@)" "$(notdir $@).tmp" && \ - rm "$(notdir $@).tmp"); \ - fi - -$(_HELP_MOFILES): %.mo: %.po - $(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi - $(AM_V_GEN)msgfmt -o "$@" "$<" - -$(_HELP_LC_FILES): $(_HELP_LINGUAS) -$(_HELP_LINGUAS): $(_HELP_LC_STAMPS) -$(_HELP_LC_STAMPS): %.stamp: %.mo -$(_HELP_LC_STAMPS): $(_HELP_C_FILES) $(_HELP_C_EXTRA) - $(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi - $(_HELP_LC_VERBOSE)if test -d "C"; then d="../"; else d="$(abs_srcdir)/"; fi; \ - mo="$(dir $@)$(patsubst %/$(notdir $@),%,$@).mo"; \ - if test -f "$${mo}"; then mo="../$${mo}"; else mo="$(abs_srcdir)/$${mo}"; fi; \ - (cd "$(dir $@)" && $(ITSTOOL) -m "$${mo}" $(foreach f,$(_HELP_C_FILES),$${d}/$(f))) && \ - touch "$@" - -.PHONY: clean-help -mostlyclean-am: $(if $(HELP_ID),clean-help) -clean-help: - rm -f $(_HELP_LC_FILES) $(_HELP_LC_STAMPS) $(_HELP_MOFILES) - -EXTRA_DIST ?= -EXTRA_DIST += $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) -EXTRA_DIST += $(if $(YELP_LC_DIST),$(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).stamp)) -EXTRA_DIST += $(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).po) -EXTRA_DIST += $(foreach f,$(HELP_MEDIA),$(foreach lc,$(HELP_LINGUAS),$(wildcard $(lc)/$(f)))) - -distdir: distdir-help-files -distdir-help-files: $(_HELP_LC_FILES) - @for lc in C $(if $(YELP_LC_DIST),$(HELP_LINGUAS)) ; do \ - $(MKDIR_P) "$(distdir)/$$lc"; \ - for file in $(HELP_FILES); do \ - if test -f "$$lc/$$file"; then d=./; else d=$(srcdir)/; fi; \ - cp -p "$$d$$lc/$$file" "$(distdir)/$$lc/" || exit 1; \ - done; \ - done; \ - -.PHONY: check-help -check: check-help -check-help: - for lc in C $(_HELP_LINGUAS); do \ - if test -d "$$lc"; \ - then d=; \ - xmlpath="$$lc"; \ - else \ - d="$(srcdir)/"; \ - xmlpath="$$lc:$(srcdir)/$$lc"; \ - fi; \ - for page in $(HELP_FILES); do \ - echo "$(XMLLINT) --noout --noent --path $$xmlpath --xinclude $$d$$lc/$$page"; \ - $(XMLLINT) --noout --noent --path "$$xmlpath" --xinclude "$$d$$lc/$$page"; \ - done; \ - done - - -.PHONY: install-help -install-data-am: $(if $(HELP_ID),install-help) -install-help: $(_HELP_LC_FILES) - @for lc in C $(_HELP_LINGUAS); do \ - $(mkinstalldirs) "$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)" || exit 1; \ - done - @for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ - if test -f "$$lc/$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ - echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir`basename $$f`"; \ - $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir`basename $$f`" || exit 1; \ - done; done - @for f in $(_HELP_C_EXTRA); do \ - lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ - if test -f "$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ - echo "$(INSTALL_DATA) $$d$$f $$helpdir`basename $$f`"; \ - $(INSTALL_DATA) "$$d$$f" "$$helpdir`basename $$f`" || exit 1; \ - done - @for f in $(HELP_MEDIA); do \ - for lc in C $(_HELP_LINGUAS); do \ - if test -f "$$lc$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - mdir=`dirname "$$f"`; \ - if test "x$mdir" = "x."; then mdir=""; fi; \ - if ! test -d "$$helpdir$$mdir"; then $(mkinstalldirs) "$$helpdir$$mdir"; fi; \ - if test -f "$$d$$lc/$$f"; then \ - echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir$$f"; \ - $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir$$f" || exit 1; \ - elif test "x$$lc" != "xC"; then \ - if test "x$(YELP_LC_MEDIA_LINKS)" != "x"; then \ - echo "$(LN_S) -f $(HELP_DIR)/C/$(HELP_ID)/$$f $$helpdir$$f"; \ - $(LN_S) -f "$(HELP_DIR)/C/$(HELP_ID)/$$f" "$$helpdir$$f" || exit 1; \ - fi; \ - fi; \ - done; \ - done - -.PHONY: uninstall-help -uninstall-am: $(if $(HELP_ID),uninstall-help) -uninstall-help: - for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir`basename $$f`"; \ - rm -f "$$helpdir`basename $$f`"; \ - done; done - @for f in $(_HELP_C_EXTRA); do \ - lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir`basename $$f`"; \ - rm -f "$$helpdir`basename $$f`"; \ - done - @for f in $(HELP_MEDIA); do \ - for lc in C $(_HELP_LINGUAS); do \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir$$f"; \ - rm -f "$$helpdir$$f"; \ - done; \ - done; -' - - - - -# ********** -# GNOME Libs -# ********** - -GTK_REQUIRED=3.22.0 -GLIB_REQUIRED=2.42.0 -GNOME_DESKTOP_REQUIRED=2.91.2 -GDKPIXBUF_REQUIRED=2.36.5 -GTK_PRINT_REQUIRED=3.5.4 -SHARED_MIME_INFO_REQUIRED=0.20 -EXEMPI_REQUIRED=1.99.5 -DESKTOP_SCHEMAS_REQUIRED=2.91.92 -LIBPEAS_REQUIRED=0.7.4 -LIBPEAS_GTK_REQUIRED=0.7.4 - -EOG_MODULES="gtk+-3.0 >= $GTK_REQUIRED \ - glib-2.0 >= $GLIB_REQUIRED \ - gio-2.0 >= $GLIB_REQUIRED \ - gio-unix-2.0 >= $GLIB_REQUIRED \ - gnome-desktop-3.0 >= $GNOME_DESKTOP_REQUIRED \ - gdk-pixbuf-2.0 >= $GDKPIXBUF_REQUIRED \ - gtk+-unix-print-3.0 >= $GTK_PRINT_REQUIRED \ - shared-mime-info >= $SHARED_MIME_INFO_REQUIRED \ - gsettings-desktop-schemas >= $DESKTOP_SCHEMAS_REQUIRED \ - libpeas-1.0 >= $LIBPEAS_REQUIRED \ - libpeas-gtk-1.0 >= $LIBPEAS_GTK_REQUIRED" - -# Introspection - - - - # Check whether --enable-introspection was given. -if test "${enable_introspection+set}" = set; then : - enableval=$enable_introspection; -else - enable_introspection=auto -fi - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gobject-introspection" >&5 -$as_echo_n "checking for gobject-introspection... " >&6; } - - case $enable_introspection in #( - no) : - found_introspection="no (disabled, use --enable-introspection to enable)" - ;; #( - yes) : - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - : -else - as_fn_error $? "gobject-introspection-1.0 is not installed" "$LINENO" 5 -fi - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0 >= 0.9.3\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0 >= 0.9.3") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - found_introspection=yes -else - as_fn_error $? "You need to have gobject-introspection >= 0.9.3 installed to build eog" "$LINENO" 5 -fi - ;; #( - auto) : - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0 >= 0.9.3\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0 >= 0.9.3") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - found_introspection=yes -else - found_introspection=no -fi - enable_introspection=$found_introspection - ;; #( - *) : - as_fn_error $? "invalid argument passed to --enable-introspection, should be one of [no/auto/yes]" "$LINENO" 5 - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_introspection" >&5 -$as_echo "$found_introspection" >&6; } - - INTROSPECTION_SCANNER= - INTROSPECTION_COMPILER= - INTROSPECTION_GENERATE= - INTROSPECTION_GIRDIR= - INTROSPECTION_TYPELIBDIR= - if test "x$found_introspection" = "xyes"; then - INTROSPECTION_SCANNER=`$PKG_CONFIG --variable=g_ir_scanner gobject-introspection-1.0` - INTROSPECTION_COMPILER=`$PKG_CONFIG --variable=g_ir_compiler gobject-introspection-1.0` - INTROSPECTION_GENERATE=`$PKG_CONFIG --variable=g_ir_generate gobject-introspection-1.0` - INTROSPECTION_GIRDIR=`$PKG_CONFIG --variable=girdir gobject-introspection-1.0` - INTROSPECTION_TYPELIBDIR="$($PKG_CONFIG --variable=typelibdir gobject-introspection-1.0)" - INTROSPECTION_CFLAGS=`$PKG_CONFIG --cflags gobject-introspection-1.0` - INTROSPECTION_LIBS=`$PKG_CONFIG --libs gobject-introspection-1.0` - INTROSPECTION_MAKEFILE=`$PKG_CONFIG --variable=datadir gobject-introspection-1.0`/gobject-introspection-1.0/Makefile.introspection - fi - - - - - - - - - - if test "x$found_introspection" = "xyes"; then - HAVE_INTROSPECTION_TRUE= - HAVE_INTROSPECTION_FALSE='#' -else - HAVE_INTROSPECTION_TRUE='#' - HAVE_INTROSPECTION_FALSE= -fi - - - - -if test "$found_introspection" = "yes"; then - have_introspection=yes - -$as_echo "#define HAVE_INTROSPECTION 1" >>confdefs.h - -else - have_introspection=no -fi - -# *************** -# libm (required) -# *************** - -LIBM= -case $host in -*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _mwvalidcheckl in -lmw" >&5 -$as_echo_n "checking for _mwvalidcheckl in -lmw... " >&6; } -if ${ac_cv_lib_mw__mwvalidcheckl+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lmw $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char _mwvalidcheckl (); -int -main () -{ -return _mwvalidcheckl (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_mw__mwvalidcheckl=yes -else - ac_cv_lib_mw__mwvalidcheckl=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mw__mwvalidcheckl" >&5 -$as_echo "$ac_cv_lib_mw__mwvalidcheckl" >&6; } -if test "x$ac_cv_lib_mw__mwvalidcheckl" = xyes; then : - LIBM=-lmw -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5 -$as_echo_n "checking for cos in -lm... " >&6; } -if ${ac_cv_lib_m_cos+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char cos (); -int -main () -{ -return cos (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_m_cos=yes -else - ac_cv_lib_m_cos=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5 -$as_echo "$ac_cv_lib_m_cos" >&6; } -if test "x$ac_cv_lib_m_cos" = xyes; then : - LIBM="$LIBM -lm" -fi - - ;; -*) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5 -$as_echo_n "checking for cos in -lm... " >&6; } -if ${ac_cv_lib_m_cos+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char cos (); -int -main () -{ -return cos (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_m_cos=yes -else - ac_cv_lib_m_cos=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5 -$as_echo "$ac_cv_lib_m_cos" >&6; } -if test "x$ac_cv_lib_m_cos" = xyes; then : - LIBM=-lm -fi - - ;; -esac - - - -# *************** -# ZLIB (required) -# *************** - -have_zlib=yes -for ac_header in zlib.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default" -if test "x$ac_cv_header_zlib_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_ZLIB_H 1 -_ACEOF - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for inflate in -lz" >&5 -$as_echo_n "checking for inflate in -lz... " >&6; } -if ${ac_cv_lib_z_inflate+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char inflate (); -int -main () -{ -return inflate (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_z_inflate=yes -else - ac_cv_lib_z_inflate=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_inflate" >&5 -$as_echo "$ac_cv_lib_z_inflate" >&6; } -if test "x$ac_cv_lib_z_inflate" = xyes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for crc32 in -lz" >&5 -$as_echo_n "checking for crc32 in -lz... " >&6; } -if ${ac_cv_lib_z_crc32+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char crc32 (); -int -main () -{ -return crc32 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_z_crc32=yes -else - ac_cv_lib_z_crc32=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_crc32" >&5 -$as_echo "$ac_cv_lib_z_crc32" >&6; } -if test "x$ac_cv_lib_z_crc32" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBZ 1 -_ACEOF - - LIBS="-lz $LIBS" - -else - have_zlib=no -fi - -else - have_zlib=no -fi - -else - have_zlib=no -fi - -done - - -if test x$have_zlib = xno; then - as_fn_error $? "No sufficient zlib library found on your system." "$LINENO" 5 -fi - -# *************** -# EXIF (optional) -# *************** - -LIBEXIF_REQUIRED=0.6.14 - - -# Check whether --with-libexif was given. -if test "${with_libexif+set}" = set; then : - withval=$with_libexif; -fi - -have_exif=no -if test x$with_libexif != xno; then - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for EXIF" >&5 -$as_echo_n "checking for EXIF... " >&6; } - -if test -n "$EXIF_CFLAGS"; then - pkg_cv_EXIF_CFLAGS="$EXIF_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libexif >= \$LIBEXIF_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libexif >= $LIBEXIF_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_EXIF_CFLAGS=`$PKG_CONFIG --cflags "libexif >= $LIBEXIF_REQUIRED" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$EXIF_LIBS"; then - pkg_cv_EXIF_LIBS="$EXIF_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libexif >= \$LIBEXIF_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libexif >= $LIBEXIF_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_EXIF_LIBS=`$PKG_CONFIG --libs "libexif >= $LIBEXIF_REQUIRED" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - EXIF_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libexif >= $LIBEXIF_REQUIRED" 2>&1` - else - EXIF_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libexif >= $LIBEXIF_REQUIRED" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$EXIF_PKG_ERRORS" >&5 - - have_exif=no -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - have_exif=no -else - EXIF_CFLAGS=$pkg_cv_EXIF_CFLAGS - EXIF_LIBS=$pkg_cv_EXIF_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - have_exif=yes -fi - if test "x$have_exif" = "xyes"; then - ac_fn_c_check_header_mongrel "$LINENO" "libexif/exif-data.h" "ac_cv_header_libexif_exif_data_h" "$ac_includes_default" -if test "x$ac_cv_header_libexif_exif_data_h" = xyes; then : - -else - have_exif=no -fi - - - fi -fi -if test "x$have_exif" = "xyes"; then - -$as_echo "#define HAVE_EXIF 1" >>confdefs.h - - EOG_MODULES="$EOG_MODULES libexif >= $LIBEXIF_REQUIRED" -fi - - if test "x$have_exif" = "xyes"; then - HAVE_EXIF_TRUE= - HAVE_EXIF_FALSE='#' -else - HAVE_EXIF_TRUE='#' - HAVE_EXIF_FALSE= -fi - - -# ********************* -# Little CMS (optional) -# ********************* - - -# Check whether --with-cms was given. -if test "${with_cms+set}" = set; then : - withval=$with_cms; -fi - -have_lcms=no -if test x$with_cms != xno; then - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LCMS" >&5 -$as_echo_n "checking for LCMS... " >&6; } - -if test -n "$LCMS_CFLAGS"; then - pkg_cv_LCMS_CFLAGS="$LCMS_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"lcms2\""; } >&5 - ($PKG_CONFIG --exists --print-errors "lcms2") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_LCMS_CFLAGS=`$PKG_CONFIG --cflags "lcms2" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$LCMS_LIBS"; then - pkg_cv_LCMS_LIBS="$LCMS_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"lcms2\""; } >&5 - ($PKG_CONFIG --exists --print-errors "lcms2") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_LCMS_LIBS=`$PKG_CONFIG --libs "lcms2" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - LCMS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "lcms2" 2>&1` - else - LCMS_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "lcms2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$LCMS_PKG_ERRORS" >&5 - - have_lcms=no -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - have_lcms=no -else - LCMS_CFLAGS=$pkg_cv_LCMS_CFLAGS - LCMS_LIBS=$pkg_cv_LCMS_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - have_lcms=yes -fi -fi -if test "x$have_lcms" = "xyes"; then - -$as_echo "#define HAVE_LCMS 1" >>confdefs.h - - EOG_MODULES="$EOG_MODULES lcms2" -fi - - if test "x$have_lcms" = "xyes"; then - HAVE_LCMS_TRUE= - HAVE_LCMS_FALSE='#' -else - HAVE_LCMS_TRUE='#' - HAVE_LCMS_FALSE= -fi - - -# ********************* -# Exempi (optional) -# ********************* - -# Check whether --with-xmp was given. -if test "${with_xmp+set}" = set; then : - withval=$with_xmp; -fi - -have_exempi=no -if test x$with_xmp != xno; then - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for EXEMPI" >&5 -$as_echo_n "checking for EXEMPI... " >&6; } - -if test -n "$EXEMPI_CFLAGS"; then - pkg_cv_EXEMPI_CFLAGS="$EXEMPI_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"exempi-2.0 >= \$EXEMPI_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "exempi-2.0 >= $EXEMPI_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_EXEMPI_CFLAGS=`$PKG_CONFIG --cflags "exempi-2.0 >= $EXEMPI_REQUIRED" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$EXEMPI_LIBS"; then - pkg_cv_EXEMPI_LIBS="$EXEMPI_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"exempi-2.0 >= \$EXEMPI_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "exempi-2.0 >= $EXEMPI_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_EXEMPI_LIBS=`$PKG_CONFIG --libs "exempi-2.0 >= $EXEMPI_REQUIRED" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - EXEMPI_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "exempi-2.0 >= $EXEMPI_REQUIRED" 2>&1` - else - EXEMPI_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "exempi-2.0 >= $EXEMPI_REQUIRED" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$EXEMPI_PKG_ERRORS" >&5 - - have_exempi=no -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - have_exempi=no -else - EXEMPI_CFLAGS=$pkg_cv_EXEMPI_CFLAGS - EXEMPI_LIBS=$pkg_cv_EXEMPI_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - have_exempi=yes -fi -fi -if test "x$have_exempi" = "xyes"; then - -$as_echo "#define HAVE_EXEMPI 1" >>confdefs.h - - EOG_MODULES="$EOG_MODULES exempi-2.0 >= $EXEMPI_REQUIRED" -fi - - if test "x$have_exempi" = "xyes"; then - HAVE_EXEMPI_TRUE= - HAVE_EXEMPI_FALSE='#' -else - HAVE_EXEMPI_TRUE='#' - HAVE_EXEMPI_FALSE= -fi - - -# Build EXIF-related documentation if we really have support for it -if test "x$have_exif" = "xyes" || test "x$have_exempi" = "xyes"; then - EOG_DOC_EXIF_START="" - EOG_DOC_EXIF_STOP="" -else - EOG_DOC_EXIF_START="<!--" - EOG_DOC_EXIF_STOP="-->" -fi - - - - -# ******************** -# Jpeg (semi-optional) -# ******************** - - -# Check whether --with-libjpeg was given. -if test "${with_libjpeg+set}" = set; then : - withval=$with_libjpeg; -fi - -have_jpeg=no -have_libjpeg_80=no -if test x$with_libjpeg != xno && test -z "$LIBJPEG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jpeg_destroy_decompress in -ljpeg" >&5 -$as_echo_n "checking for jpeg_destroy_decompress in -ljpeg... " >&6; } -if ${ac_cv_lib_jpeg_jpeg_destroy_decompress+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ljpeg $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char jpeg_destroy_decompress (); -int -main () -{ -return jpeg_destroy_decompress (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_jpeg_jpeg_destroy_decompress=yes -else - ac_cv_lib_jpeg_jpeg_destroy_decompress=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_jpeg_jpeg_destroy_decompress" >&5 -$as_echo "$ac_cv_lib_jpeg_jpeg_destroy_decompress" >&6; } -if test "x$ac_cv_lib_jpeg_jpeg_destroy_decompress" = xyes; then : - have_jpeg=yes -else - have_jpeg=no - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** JPEG loader will not be built (JPEG library not found) ***" >&5 -$as_echo "$as_me: WARNING: *** JPEG loader will not be built (JPEG library not found) ***" >&2;} -fi - - if test "$have_jpeg" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jpeglib.h" >&5 -$as_echo_n "checking for jpeglib.h... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <stdio.h> -#undef PACKAGE -#undef VERSION -#undef HAVE_STDLIB_H -#include <jpeglib.h> - -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - have_jpeg=yes -else - have_jpeg=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_jpeg" >&5 -$as_echo "$have_jpeg" >&6; } - if test "$have_jpeg" = "yes"; then - LIBJPEG='-ljpeg' - -$as_echo "#define HAVE_JPEG 1" >>confdefs.h - - -$as_echo "#define HAVE_LIBJPEG 1" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jpeg_simple_progression in -ljpeg" >&5 -$as_echo_n "checking for jpeg_simple_progression in -ljpeg... " >&6; } -if ${ac_cv_lib_jpeg_jpeg_simple_progression+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ljpeg $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char jpeg_simple_progression (); -int -main () -{ -return jpeg_simple_progression (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_jpeg_jpeg_simple_progression=yes -else - ac_cv_lib_jpeg_jpeg_simple_progression=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_jpeg_jpeg_simple_progression" >&5 -$as_echo "$ac_cv_lib_jpeg_jpeg_simple_progression" >&6; } -if test "x$ac_cv_lib_jpeg_jpeg_simple_progression" = xyes; then : - -$as_echo "#define HAVE_PROGRESSIVE_JPEG 1" >>confdefs.h - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: JPEG library does not support progressive saving." >&5 -$as_echo "$as_me: WARNING: JPEG library does not support progressive saving." >&2;} -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking libjpeg version is 8 or greater" >&5 -$as_echo_n "checking libjpeg version is 8 or greater... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <stdio.h> -#include <jpeglib.h> -#if JPEG_LIB_VERSION < 80 -#error "wrong version" -#endif -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - have_libjpeg_80=yes -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - have_libjpeg_80=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext - else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** JPEG loader will not be built (JPEG header file not found) ***" >&5 -$as_echo "$as_me: WARNING: *** JPEG loader will not be built (JPEG header file not found) ***" >&2;} - fi - fi -fi - -if test x$with_libjpeg != xno && test -z "$LIBJPEG"; then - as_fn_error $? " -*** Checks for JPEG loader failed. You can build without it by passing -*** --without-libjpeg to configure but some programs using GTK+ may -*** not work properly" "$LINENO" 5 -fi - - if test x$have_jpeg = xyes; then - ENABLE_JPEG_TRUE= - ENABLE_JPEG_FALSE='#' -else - ENABLE_JPEG_TRUE='#' - ENABLE_JPEG_FALSE= -fi - - if test "x$have_libjpeg_80" = xyes; then - HAVE_LIBJPEG_80_TRUE= - HAVE_LIBJPEG_80_FALSE='#' -else - HAVE_LIBJPEG_80_TRUE='#' - HAVE_LIBJPEG_80_FALSE= -fi - - -# *************** -# RSVG (optional for scaling svg image) -# *************** - -LIBRSVG_REQUIRED=2.36.2 - - -# Check whether --with-librsvg was given. -if test "${with_librsvg+set}" = set; then : - withval=$with_librsvg; -fi - -have_rsvg=no -if test x$with_librsvg != xno; then - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for RSVG" >&5 -$as_echo_n "checking for RSVG... " >&6; } - -if test -n "$RSVG_CFLAGS"; then - pkg_cv_RSVG_CFLAGS="$RSVG_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"librsvg-2.0 >= \$LIBRSVG_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "librsvg-2.0 >= $LIBRSVG_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_RSVG_CFLAGS=`$PKG_CONFIG --cflags "librsvg-2.0 >= $LIBRSVG_REQUIRED" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$RSVG_LIBS"; then - pkg_cv_RSVG_LIBS="$RSVG_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"librsvg-2.0 >= \$LIBRSVG_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "librsvg-2.0 >= $LIBRSVG_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_RSVG_LIBS=`$PKG_CONFIG --libs "librsvg-2.0 >= $LIBRSVG_REQUIRED" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - RSVG_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "librsvg-2.0 >= $LIBRSVG_REQUIRED" 2>&1` - else - RSVG_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "librsvg-2.0 >= $LIBRSVG_REQUIRED" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$RSVG_PKG_ERRORS" >&5 - - have_rsvg=no -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - have_rsvg=no -else - RSVG_CFLAGS=$pkg_cv_RSVG_CFLAGS - RSVG_LIBS=$pkg_cv_RSVG_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - have_rsvg=yes -fi -fi -if test "x$have_rsvg" = "xyes"; then - -$as_echo "#define HAVE_RSVG 1" >>confdefs.h - - EOG_MODULES="$EOG_MODULES librsvg-2.0 >= $LIBRSVG_REQUIRED" -fi - - if test "x$have_rsvg" = "xyes"; then - HAVE_RSVG_TRUE= - HAVE_RSVG_FALSE='#' -else - HAVE_RSVG_TRUE='#' - HAVE_RSVG_FALSE= -fi - - -# **************** -# CFLAGS/LIBS init -# **************** - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for EOG" >&5 -$as_echo_n "checking for EOG... " >&6; } - -if test -n "$EOG_CFLAGS"; then - pkg_cv_EOG_CFLAGS="$EOG_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$EOG_MODULES\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$EOG_MODULES") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_EOG_CFLAGS=`$PKG_CONFIG --cflags "$EOG_MODULES" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$EOG_LIBS"; then - pkg_cv_EOG_LIBS="$EOG_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$EOG_MODULES\""; } >&5 - ($PKG_CONFIG --exists --print-errors "$EOG_MODULES") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_EOG_LIBS=`$PKG_CONFIG --libs "$EOG_MODULES" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - EOG_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$EOG_MODULES" 2>&1` - else - EOG_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$EOG_MODULES" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$EOG_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements ($EOG_MODULES) were not met: - -$EOG_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables EOG_CFLAGS -and EOG_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables EOG_CFLAGS -and EOG_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } -else - EOG_CFLAGS=$pkg_cv_EOG_CFLAGS - EOG_LIBS=$pkg_cv_EOG_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - - - -# ******************************************************* -# libX11 (required for TotemScrSaver and Color Profiling) -# ******************************************************* - -# Check GDK rendering target -gdk_target=`$PKG_CONFIG --variable=targets gdk-3.0` - -if test "x$have_lcms" = "xyes" || test "$gdk_target" = "x11"; then - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X11" >&5 -$as_echo_n "checking for X11... " >&6; } - -if test -n "$X11_CFLAGS"; then - pkg_cv_X11_CFLAGS="$X11_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11\""; } >&5 - ($PKG_CONFIG --exists --print-errors "x11") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_X11_CFLAGS=`$PKG_CONFIG --cflags "x11" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$X11_LIBS"; then - pkg_cv_X11_LIBS="$X11_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11\""; } >&5 - ($PKG_CONFIG --exists --print-errors "x11") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_X11_LIBS=`$PKG_CONFIG --libs "x11" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - X11_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "x11" 2>&1` - else - X11_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "x11" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$X11_PKG_ERRORS" >&5 - - have_x11=no -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - have_x11=no -else - X11_CFLAGS=$pkg_cv_X11_CFLAGS - X11_LIBS=$pkg_cv_X11_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - have_x11=yes -fi - - if test "x$have_x11" != "xyes"; then - # Fallback for X11 releases without .pc-files - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5 -$as_echo_n "checking for X... " >&6; } - - -# Check whether --with-x was given. -if test "${with_x+set}" = set; then : - withval=$with_x; -fi - -# $have_x is `yes', `no', `disabled', or empty when we do not yet know. -if test "x$with_x" = xno; then - # The user explicitly disabled X. - have_x=disabled -else - case $x_includes,$x_libraries in #( - *\'*) as_fn_error $? "cannot use X directory names containing '" "$LINENO" 5;; #( - *,NONE | NONE,*) if ${ac_cv_have_x+:} false; then : - $as_echo_n "(cached) " >&6 -else - # One or both of the vars are not set, and there is no cached value. -ac_x_includes=no ac_x_libraries=no -rm -f -r conftest.dir -if mkdir conftest.dir; then - cd conftest.dir - cat >Imakefile <<'_ACEOF' -incroot: - @echo incroot='${INCROOT}' -usrlibdir: - @echo usrlibdir='${USRLIBDIR}' -libdir: - @echo libdir='${LIBDIR}' -_ACEOF - if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then - # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. - for ac_var in incroot usrlibdir libdir; do - eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" - done - # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl dylib la dll; do - if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && - test -f "$ac_im_libdir/libX11.$ac_extension"; then - ac_im_usrlibdir=$ac_im_libdir; break - fi - done - # Screen out bogus values from the imake configuration. They are - # bogus both because they are the default anyway, and because - # using them would break gcc on systems where it needs fixed includes. - case $ac_im_incroot in - /usr/include) ac_x_includes= ;; - *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; - esac - case $ac_im_usrlibdir in - /usr/lib | /usr/lib64 | /lib | /lib64) ;; - *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; - esac - fi - cd .. - rm -f -r conftest.dir -fi - -# Standard set of common directories for X headers. -# Check X11 before X11Rn because it is often a symlink to the current release. -ac_x_header_dirs=' -/usr/X11/include -/usr/X11R7/include -/usr/X11R6/include -/usr/X11R5/include -/usr/X11R4/include - -/usr/include/X11 -/usr/include/X11R7 -/usr/include/X11R6 -/usr/include/X11R5 -/usr/include/X11R4 - -/usr/local/X11/include -/usr/local/X11R7/include -/usr/local/X11R6/include -/usr/local/X11R5/include -/usr/local/X11R4/include - -/usr/local/include/X11 -/usr/local/include/X11R7 -/usr/local/include/X11R6 -/usr/local/include/X11R5 -/usr/local/include/X11R4 - -/usr/X386/include -/usr/x386/include -/usr/XFree86/include/X11 - -/usr/include -/usr/local/include -/usr/unsupported/include -/usr/athena/include -/usr/local/x11r5/include -/usr/lpp/Xamples/include - -/usr/openwin/include -/usr/openwin/share/include' - -if test "$ac_x_includes" = no; then - # Guess where to find include files, by looking for Xlib.h. - # First, try using that file with no special directory specified. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <X11/Xlib.h> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # We can compile using X headers with no special include directory. -ac_x_includes= -else - for ac_dir in $ac_x_header_dirs; do - if test -r "$ac_dir/X11/Xlib.h"; then - ac_x_includes=$ac_dir - break - fi -done -fi -rm -f conftest.err conftest.i conftest.$ac_ext -fi # $ac_x_includes = no - -if test "$ac_x_libraries" = no; then - # Check for the libraries. - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS=$LIBS - LIBS="-lX11 $LIBS" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <X11/Xlib.h> -int -main () -{ -XrmInitialize () - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - LIBS=$ac_save_LIBS -# We can link X programs with no special library path. -ac_x_libraries= -else - LIBS=$ac_save_LIBS -for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` -do - # Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl dylib la dll; do - if test -r "$ac_dir/libX11.$ac_extension"; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi # $ac_x_libraries = no - -case $ac_x_includes,$ac_x_libraries in #( - no,* | *,no | *\'*) - # Didn't find X, or a directory has "'" in its name. - ac_cv_have_x="have_x=no";; #( - *) - # Record where we found X for the cache. - ac_cv_have_x="have_x=yes\ - ac_x_includes='$ac_x_includes'\ - ac_x_libraries='$ac_x_libraries'" -esac -fi -;; #( - *) have_x=yes;; - esac - eval "$ac_cv_have_x" -fi # $with_x != no - -if test "$have_x" != yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_x" >&5 -$as_echo "$have_x" >&6; } - no_x=yes -else - # If each of the values was on the command line, it overrides each guess. - test "x$x_includes" = xNONE && x_includes=$ac_x_includes - test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries - # Update the cache value to reflect the command line values. - ac_cv_have_x="have_x=yes\ - ac_x_includes='$x_includes'\ - ac_x_libraries='$x_libraries'" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: libraries $x_libraries, headers $x_includes" >&5 -$as_echo "libraries $x_libraries, headers $x_includes" >&6; } -fi - -if test "$no_x" = yes; then - # Not all programs may use this symbol, but it does not hurt to define it. - -$as_echo "#define X_DISPLAY_MISSING 1" >>confdefs.h - - X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= -else - if test -n "$x_includes"; then - X_CFLAGS="$X_CFLAGS -I$x_includes" - fi - - # It would also be nice to do this for all -L options, not just this one. - if test -n "$x_libraries"; then - X_LIBS="$X_LIBS -L$x_libraries" - # For Solaris; some versions of Sun CC require a space after -R and - # others require no space. Words are not sufficient . . . . - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -R must be followed by a space" >&5 -$as_echo_n "checking whether -R must be followed by a space... " >&6; } - ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" - ac_xsave_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - X_LIBS="$X_LIBS -R$x_libraries" -else - LIBS="$ac_xsave_LIBS -R $x_libraries" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - X_LIBS="$X_LIBS -R $x_libraries" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: neither works" >&5 -$as_echo "neither works" >&6; } -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_c_werror_flag=$ac_xsave_c_werror_flag - LIBS=$ac_xsave_LIBS - fi - - # Check for system-dependent libraries X programs must link with. - # Do this before checking for the system-independent R6 libraries - # (-lICE), since we may need -lsocket or whatever for X linking. - - if test "$ISC" = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" - else - # Martyn Johnson says this is needed for Ultrix, if the X - # libraries were built with DECnet support. And Karl Berry says - # the Alpha needs dnet_stub (dnet does not exist). - ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char XOpenDisplay (); -int -main () -{ -return XOpenDisplay (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet" >&5 -$as_echo_n "checking for dnet_ntoa in -ldnet... " >&6; } -if ${ac_cv_lib_dnet_dnet_ntoa+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldnet $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dnet_ntoa (); -int -main () -{ -return dnet_ntoa (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dnet_dnet_ntoa=yes -else - ac_cv_lib_dnet_dnet_ntoa=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 -$as_echo "$ac_cv_lib_dnet_dnet_ntoa" >&6; } -if test "x$ac_cv_lib_dnet_dnet_ntoa" = xyes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" -fi - - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet_stub" >&5 -$as_echo_n "checking for dnet_ntoa in -ldnet_stub... " >&6; } -if ${ac_cv_lib_dnet_stub_dnet_ntoa+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldnet_stub $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dnet_ntoa (); -int -main () -{ -return dnet_ntoa (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dnet_stub_dnet_ntoa=yes -else - ac_cv_lib_dnet_stub_dnet_ntoa=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 -$as_echo "$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } -if test "x$ac_cv_lib_dnet_stub_dnet_ntoa" = xyes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" -fi - - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$ac_xsave_LIBS" - - # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, - # to get the SysV transport functions. - # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) - # needs -lnsl. - # The nsl library prevents programs from opening the X display - # on Irix 5.2, according to T.E. Dickey. - # The functions gethostbyname, getservbyname, and inet_addr are - # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. - ac_fn_c_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname" -if test "x$ac_cv_func_gethostbyname" = xyes; then : - -fi - - if test $ac_cv_func_gethostbyname = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5 -$as_echo_n "checking for gethostbyname in -lnsl... " >&6; } -if ${ac_cv_lib_nsl_gethostbyname+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lnsl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char gethostbyname (); -int -main () -{ -return gethostbyname (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_nsl_gethostbyname=yes -else - ac_cv_lib_nsl_gethostbyname=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5 -$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; } -if test "x$ac_cv_lib_nsl_gethostbyname" = xyes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" -fi - - if test $ac_cv_lib_nsl_gethostbyname = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lbsd" >&5 -$as_echo_n "checking for gethostbyname in -lbsd... " >&6; } -if ${ac_cv_lib_bsd_gethostbyname+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lbsd $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char gethostbyname (); -int -main () -{ -return gethostbyname (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_bsd_gethostbyname=yes -else - ac_cv_lib_bsd_gethostbyname=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bsd_gethostbyname" >&5 -$as_echo "$ac_cv_lib_bsd_gethostbyname" >&6; } -if test "x$ac_cv_lib_bsd_gethostbyname" = xyes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" -fi - - fi - fi - - # lieder@skyler.mavd.honeywell.com says without -lsocket, - # socket/setsockopt and other routines are undefined under SCO ODT - # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary - # on later versions), says Simon Leinen: it contains gethostby* - # variants that don't use the name server (or something). -lsocket - # must be given before -lnsl if both are needed. We assume that - # if connect needs -lnsl, so does gethostbyname. - ac_fn_c_check_func "$LINENO" "connect" "ac_cv_func_connect" -if test "x$ac_cv_func_connect" = xyes; then : - -fi - - if test $ac_cv_func_connect = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for connect in -lsocket" >&5 -$as_echo_n "checking for connect in -lsocket... " >&6; } -if ${ac_cv_lib_socket_connect+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsocket $X_EXTRA_LIBS $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char connect (); -int -main () -{ -return connect (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_socket_connect=yes -else - ac_cv_lib_socket_connect=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_connect" >&5 -$as_echo "$ac_cv_lib_socket_connect" >&6; } -if test "x$ac_cv_lib_socket_connect" = xyes; then : - X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" -fi - - fi - - # Guillermo Gomez says -lposix is necessary on A/UX. - ac_fn_c_check_func "$LINENO" "remove" "ac_cv_func_remove" -if test "x$ac_cv_func_remove" = xyes; then : - -fi - - if test $ac_cv_func_remove = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for remove in -lposix" >&5 -$as_echo_n "checking for remove in -lposix... " >&6; } -if ${ac_cv_lib_posix_remove+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lposix $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char remove (); -int -main () -{ -return remove (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_posix_remove=yes -else - ac_cv_lib_posix_remove=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_posix_remove" >&5 -$as_echo "$ac_cv_lib_posix_remove" >&6; } -if test "x$ac_cv_lib_posix_remove" = xyes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" -fi - - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - ac_fn_c_check_func "$LINENO" "shmat" "ac_cv_func_shmat" -if test "x$ac_cv_func_shmat" = xyes; then : - -fi - - if test $ac_cv_func_shmat = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shmat in -lipc" >&5 -$as_echo_n "checking for shmat in -lipc... " >&6; } -if ${ac_cv_lib_ipc_shmat+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lipc $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shmat (); -int -main () -{ -return shmat (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_ipc_shmat=yes -else - ac_cv_lib_ipc_shmat=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ipc_shmat" >&5 -$as_echo "$ac_cv_lib_ipc_shmat" >&6; } -if test "x$ac_cv_lib_ipc_shmat" = xyes; then : - X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" -fi - - fi - fi - - # Check for libraries that X11R6 Xt/Xaw programs need. - ac_save_LDFLAGS=$LDFLAGS - test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" - # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to - # check for ICE first), but we must link in the order -lSM -lICE or - # we get undefined symbols. So assume we have SM if we have ICE. - # These have to be linked with before -lX11, unlike the other - # libraries we check for below, so use a different variable. - # John Interrante, Karl Berry - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for IceConnectionNumber in -lICE" >&5 -$as_echo_n "checking for IceConnectionNumber in -lICE... " >&6; } -if ${ac_cv_lib_ICE_IceConnectionNumber+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lICE $X_EXTRA_LIBS $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char IceConnectionNumber (); -int -main () -{ -return IceConnectionNumber (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_ICE_IceConnectionNumber=yes -else - ac_cv_lib_ICE_IceConnectionNumber=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 -$as_echo "$ac_cv_lib_ICE_IceConnectionNumber" >&6; } -if test "x$ac_cv_lib_ICE_IceConnectionNumber" = xyes; then : - X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" -fi - - LDFLAGS=$ac_save_LDFLAGS - -fi - - if test x$no_x = xyes ; then - as_fn_error $? "X development libraries (libX11) not found" "$LINENO" 5 - else - X11_LIBS="$X_PRE_LIBS $X_LIBS -lX11 $X_EXTRA_LIBS" - - have_x11=yes - fi - fi -fi - -# ********* -# GSettings -# ********* - - - - # Check whether --enable-schemas-compile was given. -if test "${enable_schemas_compile+set}" = set; then : - enableval=$enable_schemas_compile; case ${enableval} in - yes) GSETTINGS_DISABLE_SCHEMAS_COMPILE="" ;; - no) GSETTINGS_DISABLE_SCHEMAS_COMPILE="1" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-schemas-compile" "$LINENO" 5 ;; - esac -fi - - - - - - - - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.16 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi -fi - gsettingsschemadir=${datadir}/glib-2.0/schemas - - if test x$cross_compiling != xyes; then - GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0` - else - # Extract the first word of "glib-compile-schemas", so it can be a program name with args. -set dummy glib-compile-schemas; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GLIB_COMPILE_SCHEMAS+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GLIB_COMPILE_SCHEMAS in - [\\/]* | ?:[\\/]*) - ac_cv_path_GLIB_COMPILE_SCHEMAS="$GLIB_COMPILE_SCHEMAS" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GLIB_COMPILE_SCHEMAS="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GLIB_COMPILE_SCHEMAS=$ac_cv_path_GLIB_COMPILE_SCHEMAS -if test -n "$GLIB_COMPILE_SCHEMAS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_SCHEMAS" >&5 -$as_echo "$GLIB_COMPILE_SCHEMAS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi - - if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then - as_fn_error $? "glib-compile-schemas not found." "$LINENO" 5 - else - : - fi - - GSETTINGS_RULES=' -.PHONY : uninstall-gsettings-schemas install-gsettings-schemas clean-gsettings-schemas - -mostlyclean-am: clean-gsettings-schemas - -gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE)) - -%.gschema.valid: %.gschema.xml $(gsettings__enum_file) - $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p $(@D) && touch $@ - -all-am: $(gsettings_SCHEMAS:.xml=.valid) -uninstall-am: uninstall-gsettings-schemas -install-data-am: install-gsettings-schemas - -.SECONDARY: $(gsettings_SCHEMAS) - -install-gsettings-schemas: $(gsettings_SCHEMAS) $(gsettings__enum_file) - @$(NORMAL_INSTALL) - if test -n "$^"; then \ - test -z "$(gsettingsschemadir)" || $(MKDIR_P) "$(DESTDIR)$(gsettingsschemadir)"; \ - $(INSTALL_DATA) $^ "$(DESTDIR)$(gsettingsschemadir)"; \ - test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir); \ - fi - -uninstall-gsettings-schemas: - @$(NORMAL_UNINSTALL) - @list='\''$(gsettings_SCHEMAS) $(gsettings__enum_file)'\''; test -n "$(gsettingsschemadir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '\''$(DESTDIR)$(gsettingsschemadir)'\'' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(gsettingsschemadir)" && rm -f $$files - test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir) - -clean-gsettings-schemas: - rm -f $(gsettings_SCHEMAS:.xml=.valid) $(gsettings__enum_file) - -ifdef gsettings_ENUM_NAMESPACE -$(gsettings__enum_file): $(gsettings_ENUM_FILES) - $(AM_V_GEN) glib-mkenums --comments '\''<!-- @comment@ -->'\'' --fhead "<schemalist>" --vhead " <@type@ id='\''$(gsettings_ENUM_NAMESPACE).@EnumName@'\''>" --vprod " <value nick='\''@valuenick@'\'' value='\''@valuenum@'\''/>" --vtail " </@type@>" --ftail "</schemalist>" $^ > $@.tmp && mv $@.tmp $@ -endif -' - - - - - - - -# *************** -# Installed tests -# *************** - - - - - - - # Check whether --enable-installed-tests was given. -if test "${enable_installed_tests+set}" = set; then : - enableval=$enable_installed_tests; -else - enable_installed_tests="no" -fi - - - if test "x$enable_installed_tests" = "xyes"; then - BEHAVE_INSTALLED_TESTS_ENABLED_TRUE= - BEHAVE_INSTALLED_TESTS_ENABLED_FALSE='#' -else - BEHAVE_INSTALLED_TESTS_ENABLED_TRUE='#' - BEHAVE_INSTALLED_TESTS_ENABLED_FALSE= -fi - - BEHAVE_INSTALLED_TESTS_ENABLED=$enable_installed_tests - - - # Define the rule for makefiles - BEHAVE_INSTALLED_TESTS_RULE=' - -ifeq ($(BEHAVE_INSTALLED_TESTS_ENABLED),yes) - -install-exec-am: installed-tests-exec-hook -install-data-am: installed-tests-data-hook -uninstall-am: uninstall-tests-hook - -META_DIRECTORY=${DESTDIR}${datadir}/installed-tests/${PACKAGE} -EXEC_DIRECTORY=${DESTDIR}${pkglibexecdir}/installed-tests - -BEHAVE_FEATURES=$(notdir $(wildcard $(srcdir)/tests/*.feature)) -BEHAVE_STEP_DEFINITION=$(notdir $(wildcard $(srcdir)/tests/steps/*.py)) -BEHAVE_COMMON_FILES=environment.py common_steps.py gnome-logo.png - -installed-tests-exec-hook: - @$(MKDIR_P) $(EXEC_DIRECTORY); - @for feature in $(BEHAVE_FEATURES); do \ - $(LIBTOOL) --mode=install $(INSTALL) --mode=777 $(srcdir)/tests/$$feature $(EXEC_DIRECTORY);\ - done - @for common_file in $(BEHAVE_COMMON_FILES); do \ - $(LIBTOOL) --mode=install $(INSTALL) --mode=777 $(srcdir)/tests/$$common_file $(EXEC_DIRECTORY);\ - done - @$(MKDIR_P) $(EXEC_DIRECTORY)/steps; - @for step_definition in $(BEHAVE_STEP_DEFINITION); do \ - $(LIBTOOL) --mode=install $(INSTALL) --mode=777 $(srcdir)/tests/steps/$$step_definition $(EXEC_DIRECTORY)/steps;\ - done - - -installed-tests-data-hook: - @$(MKDIR_P) $(META_DIRECTORY); - @for test in $(INSTALLED_TESTS); do \ - echo "Installing $$test.test to $(META_DIRECTORY)"; \ - echo [Test] > $(META_DIRECTORY)/$$test.test; \ - echo "Exec=behave $(pkglibexecdir)/installed-tests -t $$test -k -f html -o $$test.html -f plain" \ - >> $(META_DIRECTORY)/$$test.test; \ - echo "Type=$(INSTALLED_TESTS_TYPE)" >> $(META_DIRECTORY)/$$test.test; \ - done - -uninstall-tests-hook: - @for feature in $(BEHAVE_FEATURES); do\ - echo "Removing feature $(EXEC_DIRECTORY) $$feature";\ - $(LIBTOOL) --mode=uninstall $(RM) $(EXEC_DIRECTORY)/$$feature;\ - done - @for common_file in $(BEHAVE_COMMON_FILES); do\ - echo "Removing feature $(EXEC_DIRECTORY) $$common_file";\ - $(LIBTOOL) --mode=uninstall $(RM) $(EXEC_DIRECTORY)/$$common_file;\ - done - @for step_definition in $(BEHAVE_STEP_DEFINITION); do\ - echo "Removing feature $(EXEC_DIRECTORY)/steps $$step_definition";\ - $(LIBTOOL) --mode=uninstall $(RM) $(EXEC_DIRECTORY)/steps/$$step_definition;\ - done - @for test in $(INSTALLED_TESTS); do\ - $(LIBTOOL) --mode=uninstall $(RM) $(META_DIRECTORY)/$$test.test;\ - done - -endif -' - - # substitute @BEHAVE_INSTALLED_TESTS_RULE@ in Makefiles - - - - -ac_config_files="$ac_config_files Makefile src/Makefile jpegutils/Makefile help/Makefile po/Makefile.in data/Makefile data/eog.pc data/eog.desktop.in data/org.gnome.eog.gschema.xml data/pixmaps/Makefile data/icons/Makefile data/icons/16x16/Makefile data/icons/22x22/Makefile data/icons/24x24/Makefile data/icons/32x32/Makefile data/icons/48x48/Makefile data/icons/256x256/Makefile data/icons/scalable/Makefile doc/Makefile doc/reference/Makefile doc/reference/version.xml doc/reference/eog-docs.xml plugins/Makefile" - - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 -$as_echo_n "checking that generated files are newer than configure... " >&6; } - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 -$as_echo "done" >&6; } - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_GTK_DOC_TRUE}" && test -z "${HAVE_GTK_DOC_FALSE}"; then - as_fn_error $? "conditional \"HAVE_GTK_DOC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${ENABLE_GTK_DOC_TRUE}" && test -z "${ENABLE_GTK_DOC_FALSE}"; then - as_fn_error $? "conditional \"ENABLE_GTK_DOC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${GTK_DOC_BUILD_HTML_TRUE}" && test -z "${GTK_DOC_BUILD_HTML_FALSE}"; then - as_fn_error $? "conditional \"GTK_DOC_BUILD_HTML\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${GTK_DOC_BUILD_PDF_TRUE}" && test -z "${GTK_DOC_BUILD_PDF_FALSE}"; then - as_fn_error $? "conditional \"GTK_DOC_BUILD_PDF\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${GTK_DOC_USE_LIBTOOL_TRUE}" && test -z "${GTK_DOC_USE_LIBTOOL_FALSE}"; then - as_fn_error $? "conditional \"GTK_DOC_USE_LIBTOOL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${GTK_DOC_USE_REBASE_TRUE}" && test -z "${GTK_DOC_USE_REBASE_FALSE}"; then - as_fn_error $? "conditional \"GTK_DOC_USE_REBASE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_INTROSPECTION_TRUE}" && test -z "${HAVE_INTROSPECTION_FALSE}"; then - as_fn_error $? "conditional \"HAVE_INTROSPECTION\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_EXIF_TRUE}" && test -z "${HAVE_EXIF_FALSE}"; then - as_fn_error $? "conditional \"HAVE_EXIF\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_LCMS_TRUE}" && test -z "${HAVE_LCMS_FALSE}"; then - as_fn_error $? "conditional \"HAVE_LCMS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_EXEMPI_TRUE}" && test -z "${HAVE_EXEMPI_FALSE}"; then - as_fn_error $? "conditional \"HAVE_EXEMPI\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${ENABLE_JPEG_TRUE}" && test -z "${ENABLE_JPEG_FALSE}"; then - as_fn_error $? "conditional \"ENABLE_JPEG\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_LIBJPEG_80_TRUE}" && test -z "${HAVE_LIBJPEG_80_FALSE}"; then - as_fn_error $? "conditional \"HAVE_LIBJPEG_80\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_RSVG_TRUE}" && test -z "${HAVE_RSVG_FALSE}"; then - as_fn_error $? "conditional \"HAVE_RSVG\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${BEHAVE_INSTALLED_TESTS_ENABLED_TRUE}" && test -z "${BEHAVE_INSTALLED_TESTS_ENABLED_FALSE}"; then - as_fn_error $? "conditional \"BEHAVE_INSTALLED_TESTS_ENABLED\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by eog $as_me 3.26.2, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to <http://bugzilla.gnome.org/enter_bug.cgi?product=eog>." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -eog config.status 3.26.2 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' -configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in SHELL \ -ECHO \ -PATH_SEPARATOR \ -SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -OBJDUMP \ -deplibs_check_method \ -file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -DLLTOOL \ -sharedlib_from_linklib_cmd \ -AR \ -AR_FLAGS \ -archiver_list_spec \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_import \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -lt_cv_nm_interface \ -nm_file_list_spec \ -lt_cv_truncate_bin \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ -lt_prog_compiler_wl \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -MANIFEST_TOOL \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_separator \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -install_override_mode \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -configure_time_dlsearch_path \ -configure_time_lt_sys_library_path; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -ac_aux_dir='$ac_aux_dir' - -# See if we are running on zsh, and set the options that allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - RM='$RM' - ofile='$ofile' - - - -# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it - # from automake < 1.5. - eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - "jpegutils/Makefile") CONFIG_FILES="$CONFIG_FILES jpegutils/Makefile" ;; - "help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;; - "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; - "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; - "data/eog.pc") CONFIG_FILES="$CONFIG_FILES data/eog.pc" ;; - "data/eog.desktop.in") CONFIG_FILES="$CONFIG_FILES data/eog.desktop.in" ;; - "data/org.gnome.eog.gschema.xml") CONFIG_FILES="$CONFIG_FILES data/org.gnome.eog.gschema.xml" ;; - "data/pixmaps/Makefile") CONFIG_FILES="$CONFIG_FILES data/pixmaps/Makefile" ;; - "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; - "data/icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/Makefile" ;; - "data/icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/Makefile" ;; - "data/icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/Makefile" ;; - "data/icons/32x32/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/32x32/Makefile" ;; - "data/icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/Makefile" ;; - "data/icons/256x256/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/256x256/Makefile" ;; - "data/icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/Makefile" ;; - "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; - "doc/reference/Makefile") CONFIG_FILES="$CONFIG_FILES doc/reference/Makefile" ;; - "doc/reference/version.xml") CONFIG_FILES="$CONFIG_FILES doc/reference/version.xml" ;; - "doc/reference/eog-docs.xml") CONFIG_FILES="$CONFIG_FILES doc/reference/eog-docs.xml" ;; - "plugins/Makefile") CONFIG_FILES="$CONFIG_FILES plugins/Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' <conf$$subs.awk | sed ' -/^[^""]/{ - N - s/\n// -} -' >>$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' <confdefs.h | sed ' -s/'"$ac_delim"'/"\\\ -"/g' >>$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options that allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST - fi - - cfgfile=${ofile}T - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL -# Generated automatically by $as_me ($PACKAGE) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. - -# Provide generalized library-building support services. -# Written by Gordon Matzigkeit, 1996 - -# Copyright (C) 2014 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program or library that is built -# using GNU Libtool, you may include this file under the same -# distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - - -# The names of the tagged configurations supported by this script. -available_tags='' - -# Configured defaults for sys_lib_dlsearch_path munging. -: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} - -# ### BEGIN LIBTOOL CONFIG - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# Shared archive member basename,for filename based shared library versioning on AIX. -shared_archive_member_spec=$shared_archive_member_spec - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - -# The PATH separator for the build system. -PATH_SEPARATOR=$lt_PATH_SEPARATOR - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd - -# An object symbol dumper. -OBJDUMP=$lt_OBJDUMP - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method = "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - -# The archiver. -AR=$lt_AR - -# Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS - -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm into a list of symbols to manually relocate. -global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# The name lister interface. -nm_interface=$lt_lt_cv_nm_interface - -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and where our libraries should be installed. -lt_sysroot=$lt_sysroot - -# Command to truncate a binary pipe. -lt_truncate_bin=$lt_lt_cv_truncate_bin - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Detected run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path - -# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. -configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \$shlibpath_var if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - cat <<'_LT_EOF' >> "$cfgfile" - -# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE - -# func_munge_path_list VARIABLE PATH -# ----------------------------------- -# VARIABLE is name of variable containing _space_ separated list of -# directories to be munged by the contents of PATH, which is string -# having a format: -# "DIR[:DIR]:" -# string "DIR[ DIR]" will be prepended to VARIABLE -# ":DIR[:DIR]" -# string "DIR[ DIR]" will be appended to VARIABLE -# "DIRP[:DIRP]::[DIRA:]DIRA" -# string "DIRP[ DIRP]" will be prepended to VARIABLE and string -# "DIRA[ DIRA]" will be appended to VARIABLE -# "DIR[:DIR]" -# VARIABLE will be replaced by "DIR[ DIR]" -func_munge_path_list () -{ - case x$2 in - x) - ;; - *:) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" - ;; - x:*) - eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" - ;; - *::*) - eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" - eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" - ;; - *) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" - ;; - esac -} - - -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -func_cc_basename () -{ - for cc_temp in $*""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac - done - func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -} - - -# ### END FUNCTIONS SHARED WITH CONFIGURE - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain=$ac_aux_dir/ltmain.sh - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - "po-directories":C) - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - gt_tab=`printf '\t'` - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assignment from automake < 1.5. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - # Hide the ALL_LINGUAS assignment from automake < 1.5. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - - -echo " -Configure summary: - - Source code location .......: ${srcdir} - Compiler ...................: ${CC} - Extra Compiler Warnings ....: ${WARN_CFLAGS} - - EXIF support ...............: ${have_exif} - XMP support ................: ${have_exempi} - JPEG support ...............: ${have_jpeg} - Colour management support ..: ${have_lcms} - GObject Introspection.......: ${have_introspection} -" diff -Nru eog-3.26.2/configure.ac eog-3.27.90/configure.ac --- eog-3.26.2/configure.ac 2017-10-02 20:40:21.000000000 +0000 +++ eog-3.27.90/configure.ac 1970-01-01 00:00:00.000000000 +0000 @@ -1,365 +0,0 @@ -AC_PREREQ(2.59) - -m4_define(eog_major_version, 3) -m4_define(eog_minor_version, 26) -m4_define(eog_micro_version, 2) -m4_define(eog_version, eog_major_version.eog_minor_version.eog_micro_version) - -AC_INIT([eog], eog_version, [http://bugzilla.gnome.org/enter_bug.cgi?product=eog], [eog]) -AM_INIT_AUTOMAKE([1.11 foreign no-dist-gzip dist-xz]) - -AC_CONFIG_MACRO_DIR([m4]) - -# Support silencing the build output if supported (automake-1.11+) -m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])]) - -AC_DEFINE(EOG_MAJOR_VERSION, eog_major_version, [EOG major version]) -AC_SUBST(EOG_MAJOR_VERSION, eog_major_version) -AC_DEFINE(EOG_MINOR_VERSION, eog_minor_version, [EOG minor version]) -AC_SUBST(EOG_MINOR_VERSION, eog_minor_version) -AC_DEFINE(EOG_MICRO_VERSION, eog_micro_version, [EOG micro version]) -AC_SUBST(EOG_MICRO_VERSION, eog_micro_version) - -EOG_API_VERSION=3.0 -AC_SUBST(EOG_API_VERSION) - -AC_CONFIG_HEADERS([config.h]) - -AM_MAINTAINER_MODE([enable]) - -GNOME_COMPILE_WARNINGS -GNOME_DEBUG_CHECK - -# Disable building static archives by default -LT_PREREQ([2.2.6]) -LT_INIT([disable-static]) - -AC_PROG_CC -AM_PROG_CC_C_O -AC_PATH_PROG([GLIB_COMPILE_RESOURCES], [glib-compile-resources]) -AC_PATH_PROG([GLIB_GENMARSHAL], [glib-genmarshal]) -AC_PATH_PROG([GLIB_MKENUMS],[glib-mkenums]) - -PKG_PROG_PKG_CONFIG - -GTK_DOC_CHECK([1.16], [--flavour no-tmpl]) - -AC_CHECK_FUNCS(strptime) - -# **************************************************************** -# Support for nl_langinfo (_NL_MEASUREMENT_MEASUREMENT) (optional) -# **************************************************************** -AC_MSG_CHECKING([for _NL_MEASUREMENT_MEASUREMENT]) -AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <langinfo.h>]], - [[ - char c; - c = *((unsigned char *) nl_langinfo(_NL_MEASUREMENT_MEASUREMENT));]])], - [have_langinfo_measurement=yes], [have_langinfo_measurement=no]) -AC_MSG_RESULT($have_langinfo_measurement) -if test "$have_langinfo_measurement" = "yes"; then - AC_DEFINE([HAVE__NL_MEASUREMENT_MEASUREMENT], [1], - [Define if _NL_MEASUREMENT_MEASUREMENT is available]) -fi - -# *********** -# Translation -# *********** - -GETTEXT_PACKAGE=AC_PACKAGE_NAME -AC_SUBST(GETTEXT_PACKAGE) -AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE, "$GETTEXT_PACKAGE", [Gettext package.]) - -AM_GNU_GETTEXT_VERSION([0.19.7]) -AM_GNU_GETTEXT([external]) - -AC_SUBST(CFLAGS) -AC_SUBST(LDFLAGS) - -# *************** -# User documentation -# *************** -YELP_HELP_INIT - -# ********** -# GNOME Libs -# ********** - -GTK_REQUIRED=3.22.0 -GLIB_REQUIRED=2.42.0 -GNOME_DESKTOP_REQUIRED=2.91.2 -GDKPIXBUF_REQUIRED=2.36.5 -GTK_PRINT_REQUIRED=3.5.4 -SHARED_MIME_INFO_REQUIRED=0.20 -EXEMPI_REQUIRED=1.99.5 -DESKTOP_SCHEMAS_REQUIRED=2.91.92 -LIBPEAS_REQUIRED=0.7.4 -LIBPEAS_GTK_REQUIRED=0.7.4 - -EOG_MODULES="gtk+-3.0 >= $GTK_REQUIRED \ - glib-2.0 >= $GLIB_REQUIRED \ - gio-2.0 >= $GLIB_REQUIRED \ - gio-unix-2.0 >= $GLIB_REQUIRED \ - gnome-desktop-3.0 >= $GNOME_DESKTOP_REQUIRED \ - gdk-pixbuf-2.0 >= $GDKPIXBUF_REQUIRED \ - gtk+-unix-print-3.0 >= $GTK_PRINT_REQUIRED \ - shared-mime-info >= $SHARED_MIME_INFO_REQUIRED \ - gsettings-desktop-schemas >= $DESKTOP_SCHEMAS_REQUIRED \ - libpeas-1.0 >= $LIBPEAS_REQUIRED \ - libpeas-gtk-1.0 >= $LIBPEAS_GTK_REQUIRED" - -# Introspection -GOBJECT_INTROSPECTION_CHECK([0.9.3]) - -if test "$found_introspection" = "yes"; then - have_introspection=yes - AC_DEFINE([HAVE_INTROSPECTION], [1], [Define to enable GObject Introspection]) -else - have_introspection=no -fi - -# *************** -# libm (required) -# *************** - -LT_LIB_M - -# *************** -# ZLIB (required) -# *************** - -have_zlib=yes -AC_CHECK_HEADERS([zlib.h], - [AC_CHECK_LIB([z], [inflate], - [AC_CHECK_LIB([z], [crc32], [], - [have_zlib=no])], - [have_zlib=no])], - [have_zlib=no]) - -if test x$have_zlib = xno; then - AC_MSG_ERROR([No sufficient zlib library found on your system.]) -fi - -# *************** -# EXIF (optional) -# *************** - -LIBEXIF_REQUIRED=0.6.14 - -AC_ARG_WITH([libexif], AS_HELP_STRING([--without-libexif], [disable EXIF support])) -have_exif=no -if test x$with_libexif != xno; then - PKG_CHECK_MODULES(EXIF, libexif >= $LIBEXIF_REQUIRED, have_exif=yes, have_exif=no) - if test "x$have_exif" = "xyes"; then - AC_CHECK_HEADER([libexif/exif-data.h],[],[have_exif=no]) - fi -fi -if test "x$have_exif" = "xyes"; then - AC_DEFINE(HAVE_EXIF, 1, [EXIF Support.]) - EOG_MODULES="$EOG_MODULES libexif >= $LIBEXIF_REQUIRED" -fi - -AM_CONDITIONAL([HAVE_EXIF], [test "x$have_exif" = "xyes"]) - -# ********************* -# Little CMS (optional) -# ********************* - -AC_ARG_WITH([cms], AS_HELP_STRING([--without-cms], [disable colour management support])) -have_lcms=no -if test x$with_cms != xno; then - PKG_CHECK_MODULES(LCMS, lcms2, have_lcms=yes, have_lcms=no) -fi -if test "x$have_lcms" = "xyes"; then - AC_DEFINE(HAVE_LCMS, 1, [Little CMS Support.]) - EOG_MODULES="$EOG_MODULES lcms2" -fi - -AM_CONDITIONAL([HAVE_LCMS], [test "x$have_lcms" = "xyes"]) - -# ********************* -# Exempi (optional) -# ********************* -AC_ARG_WITH(xmp, AS_HELP_STRING([--without-xmp], [disable special XMP support])) -have_exempi=no -if test x$with_xmp != xno; then - PKG_CHECK_MODULES(EXEMPI, exempi-2.0 >= $EXEMPI_REQUIRED, have_exempi=yes, have_exempi=no) -fi -if test "x$have_exempi" = "xyes"; then - AC_DEFINE(HAVE_EXEMPI,1, [XMP support.]) - EOG_MODULES="$EOG_MODULES exempi-2.0 >= $EXEMPI_REQUIRED" -fi - -AM_CONDITIONAL([HAVE_EXEMPI], [test "x$have_exempi" = "xyes"]) - -# Build EXIF-related documentation if we really have support for it -if test "x$have_exif" = "xyes" || test "x$have_exempi" = "xyes"; then - EOG_DOC_EXIF_START="" - EOG_DOC_EXIF_STOP="" -else - EOG_DOC_EXIF_START="<!--" - EOG_DOC_EXIF_STOP="-->" -fi - -AC_SUBST([EOG_DOC_EXIF_START]) -AC_SUBST([EOG_DOC_EXIF_STOP]) - -# ******************** -# Jpeg (semi-optional) -# ******************** - -AC_ARG_WITH(libjpeg, AS_HELP_STRING([--without-libjpeg], [disable special JPEG support])) -have_jpeg=no -have_libjpeg_80=no -if test x$with_libjpeg != xno && test -z "$LIBJPEG"; then - AC_CHECK_LIB(jpeg, jpeg_destroy_decompress, - have_jpeg=yes, - have_jpeg=no - AC_MSG_WARN(*** JPEG loader will not be built (JPEG library not found) ***)) - if test "$have_jpeg" = yes; then - AC_MSG_CHECKING([for jpeglib.h]) - AC_PREPROC_IFELSE([AC_LANG_SOURCE( - [[ -#include <stdio.h> -#undef PACKAGE -#undef VERSION -#undef HAVE_STDLIB_H -#include <jpeglib.h> - ]])], - [have_jpeg=yes], [have_jpeg=no]) - AC_MSG_RESULT($have_jpeg) - if test "$have_jpeg" = "yes"; then - LIBJPEG='-ljpeg' - AC_DEFINE(HAVE_JPEG, 1, [Jpeg Support.]) - AC_DEFINE(HAVE_LIBJPEG, 1, [libjpeg is Present.]) - AC_CHECK_LIB(jpeg, jpeg_simple_progression, - AC_DEFINE(HAVE_PROGRESSIVE_JPEG, 1, [Jpeg Progressive Saving Support.]), - AC_MSG_WARN(JPEG library does not support progressive saving.)) - AC_MSG_CHECKING([[libjpeg version is 8 or greater]]) - AC_PREPROC_IFELSE([ AC_LANG_SOURCE( - [[ -#include <stdio.h> -#include <jpeglib.h> -#if JPEG_LIB_VERSION < 80 -#error "wrong version" -#endif ]])], - [AC_MSG_RESULT(yes) - have_libjpeg_80=yes], - [AC_MSG_RESULT(no) - have_libjpeg_80=no]) - else - AC_MSG_WARN(*** JPEG loader will not be built (JPEG header file not found) ***) - fi - fi -fi - -if test x$with_libjpeg != xno && test -z "$LIBJPEG"; then - AC_MSG_ERROR([ -*** Checks for JPEG loader failed. You can build without it by passing -*** --without-libjpeg to configure but some programs using GTK+ may -*** not work properly]) -fi -AC_SUBST(LIBJPEG) -AM_CONDITIONAL(ENABLE_JPEG, test x$have_jpeg = xyes) -AM_CONDITIONAL(HAVE_LIBJPEG_80, test "x$have_libjpeg_80" = xyes) - -# *************** -# RSVG (optional for scaling svg image) -# *************** - -LIBRSVG_REQUIRED=2.36.2 - -AC_ARG_WITH([librsvg], AS_HELP_STRING([--without-librsvg], [disable RSVG support])) -have_rsvg=no -if test x$with_librsvg != xno; then - PKG_CHECK_MODULES(RSVG, librsvg-2.0 >= $LIBRSVG_REQUIRED, have_rsvg=yes, have_rsvg=no) -fi -if test "x$have_rsvg" = "xyes"; then - AC_DEFINE(HAVE_RSVG, 1, [RSVG Support.]) - EOG_MODULES="$EOG_MODULES librsvg-2.0 >= $LIBRSVG_REQUIRED" -fi - -AM_CONDITIONAL([HAVE_RSVG], [test "x$have_rsvg" = "xyes"]) - -# **************** -# CFLAGS/LIBS init -# **************** - -PKG_CHECK_MODULES(EOG, $EOG_MODULES) -AC_SUBST(EOG_CFLAGS) -AC_SUBST(EOG_LIBS) - -# ******************************************************* -# libX11 (required for TotemScrSaver and Color Profiling) -# ******************************************************* - -# Check GDK rendering target -gdk_target=`$PKG_CONFIG --variable=targets gdk-3.0` - -if test "x$have_lcms" = "xyes" || test "$gdk_target" = "x11"; then - PKG_CHECK_MODULES(X11, [x11], have_x11=yes, have_x11=no) - - if test "x$have_x11" != "xyes"; then - # Fallback for X11 releases without .pc-files - AC_PATH_XTRA - if test x$no_x = xyes ; then - AC_MSG_ERROR([X development libraries (libX11) not found]) - else - X11_LIBS="$X_PRE_LIBS $X_LIBS -lX11 $X_EXTRA_LIBS" - AC_SUBST(X11_LIBS) - have_x11=yes - fi - fi -fi - -# ********* -# GSettings -# ********* - -GLIB_GSETTINGS - -# *************** -# Installed tests -# *************** -BEHAVE_INSTALLED_TESTS - -AC_CONFIG_FILES([ -Makefile -src/Makefile -jpegutils/Makefile -help/Makefile -po/Makefile.in -data/Makefile -data/eog.pc -data/eog.desktop.in -data/org.gnome.eog.gschema.xml -data/pixmaps/Makefile -data/icons/Makefile -data/icons/16x16/Makefile -data/icons/22x22/Makefile -data/icons/24x24/Makefile -data/icons/32x32/Makefile -data/icons/48x48/Makefile -data/icons/256x256/Makefile -data/icons/scalable/Makefile -doc/Makefile -doc/reference/Makefile -doc/reference/version.xml -doc/reference/eog-docs.xml -plugins/Makefile -]) - -AC_OUTPUT - -echo " -Configure summary: - - Source code location .......: ${srcdir} - Compiler ...................: ${CC} - Extra Compiler Warnings ....: ${WARN_CFLAGS} - - EXIF support ...............: ${have_exif} - XMP support ................: ${have_exempi} - JPEG support ...............: ${have_jpeg} - Colour management support ..: ${have_lcms} - GObject Introspection.......: ${have_introspection} -" diff -Nru eog-3.26.2/data/help-overlay.ui eog-3.27.90/data/help-overlay.ui --- eog-3.26.2/data/help-overlay.ui 2016-11-05 15:04:43.000000000 +0000 +++ eog-3.27.90/data/help-overlay.ui 2018-02-12 20:46:58.000000000 +0000 @@ -64,15 +64,15 @@ <child> <object class="GtkShortcutsShortcut"> <property name="visible">1</property> - <property name="accelerator"><ctrl>F9</property> - <property name="title" translatable="yes" context="shortcut window">Show/Hide the sidebar</property> + <property name="accelerator"><alt>Return</property> + <property name="title" translatable="yes" context="shortcut window">Show image properties dialog</property> </object> </child> <child> <object class="GtkShortcutsShortcut"> <property name="visible">1</property> - <property name="accelerator"><alt>Return</property> - <property name="title" translatable="yes" context="shortcut window">Show image properties dialog</property> + <property name="accelerator">F9</property> + <property name="title" translatable="yes" context="shortcut window">Show/Hide the sidebar</property> </object> </child> <child> @@ -188,7 +188,7 @@ <child> <object class="GtkShortcutsShortcut"> <property name="visible">1</property> - <property name="accelerator">F9</property> + <property name="accelerator"><ctrl>F9</property> <property name="title" translatable="yes" context="shortcut window">Show/Hide the image gallery</property> </object> </child> diff -Nru eog-3.26.2/data/icons/16x16/Makefile.am eog-3.27.90/data/icons/16x16/Makefile.am --- eog-3.26.2/data/icons/16x16/Makefile.am 2016-08-21 15:12:17.000000000 +0000 +++ eog-3.27.90/data/icons/16x16/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,17 +0,0 @@ -size = 16x16 -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps - -dist_appicons_DATA = \ - apps/eog.png -dist_actionicons_DATA = \ - actions/eog-plugin.png \ - actions/slideshow-play.png - -noinst_DATA = \ - actions/eog-plugin.svg \ - actions/slideshow-play.svg - -EXTRA_DIST = $(noinst_DATA) - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/data/icons/16x16/Makefile.in eog-3.27.90/data/icons/16x16/Makefile.in --- eog-3.26.2/data/icons/16x16/Makefile.in 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/data/icons/16x16/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,612 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/16x16 -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(dist_actionicons_DATA) \ - $(dist_appicons_DATA) $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(actioniconsdir)" \ - "$(DESTDIR)$(appiconsdir)" -DATA = $(dist_actionicons_DATA) $(dist_appicons_DATA) $(noinst_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -size = 16x16 -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps -dist_appicons_DATA = \ - apps/eog.png - -dist_actionicons_DATA = \ - actions/eog-plugin.png \ - actions/slideshow-play.png - -noinst_DATA = \ - actions/eog-plugin.svg \ - actions/slideshow-play.svg - -EXTRA_DIST = $(noinst_DATA) -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/16x16/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/16x16/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-dist_actioniconsDATA: $(dist_actionicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(actioniconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(actioniconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(actioniconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(actioniconsdir)" || exit $$?; \ - done - -uninstall-dist_actioniconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(actioniconsdir)'; $(am__uninstall_files_from_dir) -install-dist_appiconsDATA: $(dist_appicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(appiconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(appiconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appiconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(appiconsdir)" || exit $$?; \ - done - -uninstall-dist_appiconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(appiconsdir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(actioniconsdir)" "$(DESTDIR)$(appiconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_actioniconsDATA \ - install-dist_appiconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_actioniconsDATA \ - uninstall-dist_appiconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am \ - install-dist_actioniconsDATA install-dist_appiconsDATA \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags-am uninstall uninstall-am \ - uninstall-dist_actioniconsDATA uninstall-dist_appiconsDATA - -.PRECIOUS: Makefile - - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/data/icons/22x22/Makefile.am eog-3.27.90/data/icons/22x22/Makefile.am --- eog-3.26.2/data/icons/22x22/Makefile.am 2016-08-21 15:12:17.000000000 +0000 +++ eog-3.27.90/data/icons/22x22/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,17 +0,0 @@ -size = 22x22 -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps - -dist_appicons_DATA = \ - apps/eog.png -dist_actionicons_DATA = \ - actions/eog-plugin.png \ - actions/slideshow-play.png - -noinst_DATA = \ - actions/eog-plugin.svg \ - actions/slideshow-play.svg - -EXTRA_DIST = $(noinst_DATA) - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/data/icons/22x22/Makefile.in eog-3.27.90/data/icons/22x22/Makefile.in --- eog-3.26.2/data/icons/22x22/Makefile.in 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/data/icons/22x22/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,612 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/22x22 -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(dist_actionicons_DATA) \ - $(dist_appicons_DATA) $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(actioniconsdir)" \ - "$(DESTDIR)$(appiconsdir)" -DATA = $(dist_actionicons_DATA) $(dist_appicons_DATA) $(noinst_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -size = 22x22 -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps -dist_appicons_DATA = \ - apps/eog.png - -dist_actionicons_DATA = \ - actions/eog-plugin.png \ - actions/slideshow-play.png - -noinst_DATA = \ - actions/eog-plugin.svg \ - actions/slideshow-play.svg - -EXTRA_DIST = $(noinst_DATA) -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/22x22/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/22x22/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-dist_actioniconsDATA: $(dist_actionicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(actioniconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(actioniconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(actioniconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(actioniconsdir)" || exit $$?; \ - done - -uninstall-dist_actioniconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(actioniconsdir)'; $(am__uninstall_files_from_dir) -install-dist_appiconsDATA: $(dist_appicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(appiconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(appiconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appiconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(appiconsdir)" || exit $$?; \ - done - -uninstall-dist_appiconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(appiconsdir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(actioniconsdir)" "$(DESTDIR)$(appiconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_actioniconsDATA \ - install-dist_appiconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_actioniconsDATA \ - uninstall-dist_appiconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am \ - install-dist_actioniconsDATA install-dist_appiconsDATA \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags-am uninstall uninstall-am \ - uninstall-dist_actioniconsDATA uninstall-dist_appiconsDATA - -.PRECIOUS: Makefile - - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/data/icons/24x24/Makefile.am eog-3.27.90/data/icons/24x24/Makefile.am --- eog-3.26.2/data/icons/24x24/Makefile.am 2016-08-21 15:12:17.000000000 +0000 +++ eog-3.27.90/data/icons/24x24/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,10 +0,0 @@ -size = 24x24 -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps - -dist_appicons_DATA = \ - apps/eog.png -dist_actionicons_DATA = \ - actions/slideshow-play.png - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/data/icons/24x24/Makefile.in eog-3.27.90/data/icons/24x24/Makefile.in --- eog-3.26.2/data/icons/24x24/Makefile.in 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/data/icons/24x24/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,606 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/24x24 -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(dist_actionicons_DATA) \ - $(dist_appicons_DATA) $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(actioniconsdir)" \ - "$(DESTDIR)$(appiconsdir)" -DATA = $(dist_actionicons_DATA) $(dist_appicons_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -size = 24x24 -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps -dist_appicons_DATA = \ - apps/eog.png - -dist_actionicons_DATA = \ - actions/slideshow-play.png - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/24x24/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/24x24/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-dist_actioniconsDATA: $(dist_actionicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(actioniconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(actioniconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(actioniconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(actioniconsdir)" || exit $$?; \ - done - -uninstall-dist_actioniconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(actioniconsdir)'; $(am__uninstall_files_from_dir) -install-dist_appiconsDATA: $(dist_appicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(appiconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(appiconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appiconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(appiconsdir)" || exit $$?; \ - done - -uninstall-dist_appiconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(appiconsdir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(actioniconsdir)" "$(DESTDIR)$(appiconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_actioniconsDATA \ - install-dist_appiconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_actioniconsDATA \ - uninstall-dist_appiconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am \ - install-dist_actioniconsDATA install-dist_appiconsDATA \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags-am uninstall uninstall-am \ - uninstall-dist_actioniconsDATA uninstall-dist_appiconsDATA - -.PRECIOUS: Makefile - - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/data/icons/256x256/Makefile.am eog-3.27.90/data/icons/256x256/Makefile.am --- eog-3.26.2/data/icons/256x256/Makefile.am 2015-09-28 12:46:13.000000000 +0000 +++ eog-3.27.90/data/icons/256x256/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,7 +0,0 @@ -size = 256x256 -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps - -dist_appicons_DATA = \ - apps/eog.png - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/data/icons/256x256/Makefile.in eog-3.27.90/data/icons/256x256/Makefile.in --- eog-3.26.2/data/icons/256x256/Makefile.in 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/data/icons/256x256/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,577 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/256x256 -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(dist_appicons_DATA) \ - $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(appiconsdir)" -DATA = $(dist_appicons_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -size = 256x256 -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps -dist_appicons_DATA = \ - apps/eog.png - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/256x256/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/256x256/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-dist_appiconsDATA: $(dist_appicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(appiconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(appiconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appiconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(appiconsdir)" || exit $$?; \ - done - -uninstall-dist_appiconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(appiconsdir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(appiconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_appiconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_appiconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am \ - install-dist_appiconsDATA install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ - uninstall-am uninstall-dist_appiconsDATA - -.PRECIOUS: Makefile - - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/data/icons/32x32/actions/eog-image-gallery.svg eog-3.27.90/data/icons/32x32/actions/eog-image-gallery.svg --- eog-3.26.2/data/icons/32x32/actions/eog-image-gallery.svg 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/data/icons/32x32/actions/eog-image-gallery.svg 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,266 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- Created with Inkscape (http://www.inkscape.org/) --> +<svg + xmlns:dc="http://purl.org/dc/elements/1.1/" + xmlns:cc="http://web.resource.org/cc/" + xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:svg="http://www.w3.org/2000/svg" + xmlns="http://www.w3.org/2000/svg" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" + xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" + width="32px" + height="32px" + id="svg4948" + sodipodi:version="0.32" + inkscape:version="0.45+devel" + sodipodi:docname="mode-browse.svg" + inkscape:output_extension="org.inkscape.output.svg.inkscape" + inkscape:export-filename="/home/andreas/project/misc icons/32x32/mode-browse.png" + inkscape:export-xdpi="90" + inkscape:export-ydpi="90"> + <defs + id="defs4950"> + <linearGradient + inkscape:collect="always" + id="linearGradient5573"> + <stop + style="stop-color:#86501b;stop-opacity:1;" + offset="0" + id="stop5575" /> + <stop + style="stop-color:#86501b;stop-opacity:0;" + offset="1" + id="stop5577" /> + </linearGradient> + <linearGradient + inkscape:collect="always" + xlink:href="#linearGradient5573" + id="linearGradient5579" + x1="7.9565129" + y1="25.368917" + x2="7.9565129" + y2="27.981859" + gradientUnits="userSpaceOnUse" + gradientTransform="matrix(1,0,0,0.7502503,0,6.0069831)" /> + </defs> + <sodipodi:namedview + id="base" + pagecolor="#ffffff" + bordercolor="#666666" + borderopacity="1.0" + inkscape:pageopacity="0.0" + inkscape:pageshadow="2" + inkscape:zoom="8" + inkscape:cx="17.199727" + inkscape:cy="21.772208" + inkscape:current-layer="layer1" + showgrid="true" + inkscape:grid-bbox="true" + inkscape:document-units="px" + inkscape:window-width="1680" + inkscape:window-height="973" + inkscape:window-x="0" + inkscape:window-y="48"> + <inkscape:grid + type="xygrid" + id="grid4966" /> + </sodipodi:namedview> + <metadata + id="metadata4953"> + <rdf:RDF> + <cc:Work + rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type + rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> + </cc:Work> + </rdf:RDF> + </metadata> + <g + id="layer1" + inkscape:label="Layer 1" + inkscape:groupmode="layer"> + <rect + style="opacity:1;fill:#e0e0dc;fill-opacity:1;stroke:#888a85;stroke-width:0.99999994000000003;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect4968" + width="13.082925" + height="12.907753" + x="1.5181555" + y="1.5922465" + rx="0.89303237" + ry="0.89303237" /> + <rect + style="opacity:1;fill:#e0e0dc;fill-opacity:1;stroke:#888a85;stroke-width:0.99999981999999998;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5547" + width="13.056768" + height="13.034045" + x="17.493132" + y="1.5652591" + rx="0.89303237" + ry="0.89303237" /> + <rect + style="opacity:1;fill:#e0e0dc;fill-opacity:1;stroke:#888a85;stroke-width:0.99999994000000003;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5549" + width="13.082925" + height="12.907753" + x="1.474485" + y="17.550539" + rx="0.89303237" + ry="0.89303237" /> + <rect + style="opacity:1;fill:#e0e0dc;fill-opacity:1;stroke:#888a85;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5551" + width="12.956632" + height="13.008806" + x="17.549599" + y="17.556454" + rx="0.89303237" + ry="0.89303237" /> + <rect + style="opacity:1;fill:#b5a184;fill-opacity:1;stroke:#555753;stroke-width:0.99999994;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5553" + width="8.8748369" + height="6.9149623" + x="19.5944" + y="4.5562711" + rx="0" + ry="0" /> + <rect + style="opacity:1;fill:#7590b7;fill-opacity:1;stroke:#374762;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5555" + width="8.9749756" + height="7.0652037" + x="3.5274765" + y="4.4674311" + rx="0" + ry="0" /> + <rect + style="opacity:1;fill:#b5a184;fill-opacity:1;stroke:#555753;stroke-width:0.99999994;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5557" + width="9.0011311" + height="7.0368099" + x="19.538612" + y="20.509232" + rx="0" + ry="0" /> + <rect + style="opacity:1;fill:#c07837;fill-opacity:1;stroke:#784a21;stroke-width:0.99999994;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5559" + width="8.9749746" + height="7.1089396" + x="3.5348368" + y="20.452709" + rx="0" + ry="0" /> + <rect + style="opacity:1;fill:#48638a;fill-opacity:1;stroke:none;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5561" + width="8.0372915" + height="3.0905681" + x="3.973994" + y="7.9774284" /> + <rect + style="opacity:1;fill:#eeeeec;fill-opacity:1;stroke:none;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5563" + width="0.93768394" + height="0.98233557" + x="5.047596" + y="6.9950929" /> + <rect + style="opacity:1;fill:url(#linearGradient5579);fill-opacity:1;stroke:none;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5565" + width="8.1712465" + height="2.9479904" + x="3.9293432" + y="24.05201" /> + <path + sodipodi:type="arc" + style="opacity:1;fill:#edd400;fill-opacity:1;stroke:none;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="path5567" + sodipodi:cx="22.132998" + sodipodi:cy="7.6252861" + sodipodi:rx="1.3576589" + sodipodi:ry="1.3892324" + d="M 23.490656,7.6252861 A 1.3576589,1.3892324 0 1 1 20.775339,7.6252861 A 1.3576589,1.3892324 0 1 1 23.490656,7.6252861 z" + transform="matrix(1.0697675,0,0,1.0681818,-2.1440585,-1.688124)" /> + <path + sodipodi:type="arc" + style="opacity:1;fill:#eeeeec;fill-opacity:1;stroke:none;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="path5571" + sodipodi:cx="22.132998" + sodipodi:cy="7.6252861" + sodipodi:rx="1.3576589" + sodipodi:ry="1.3892324" + d="M 23.490656,7.6252861 A 1.3576589,1.3892324 0 1 1 20.775339,7.6252861 A 1.3576589,1.3892324 0 1 1 23.490656,7.6252861 z" + transform="matrix(1.0697675,0,0,1.0681818,-2.1544093,14.414342)" /> + <rect + style="opacity:1;fill:#83352b;fill-opacity:1;stroke:none;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect4964" + width="7.9565134" + height="1.0608337" + x="20.074541" + y="26.01388" /> + <rect + style="opacity:1;fill:#83352b;fill-opacity:1;stroke:none;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect4966" + width="7.9565134" + height="0.94720393" + x="20.000002" + y="10.018753" /> + <rect + style="opacity:1;fill:#4e4d46;fill-opacity:1;stroke:none;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect4969" + width="1.0103508" + height="4.230844" + x="25" + y="21.846182" + rx="0" + ry="0" /> + <rect + style="opacity:1;fill:#4e4d46;fill-opacity:1;stroke:none;stroke-width:1;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect4971" + width="1.0103508" + height="4.230844" + x="23.989649" + y="5.8510551" + rx="0" + ry="0" /> + <rect + style="opacity:1;fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.99999994000000003;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect4967" + width="11.082926" + height="10.907753" + x="2.5181556" + y="2.5922472" + rx="0.0625" + ry="0.0625" /> + <rect + style="opacity:1;fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.99999994;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5546" + width="11.082926" + height="10.907753" + x="18.455656" + y="2.592247" + rx="0.0625" + ry="0.0625" /> + <rect + style="opacity:1;fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.99999988;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5548" + width="11.082926" + height="10.951947" + x="2.5181556" + y="18.548052" + rx="0.0625" + ry="0.062499996" /> + <rect + style="opacity:1;fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.99999982;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" + id="rect5550" + width="11.038732" + height="10.951947" + x="18.499849" + y="18.548052" + rx="0.062499996" + ry="0.062499996" /> + </g> +</svg> diff -Nru eog-3.26.2/data/icons/32x32/Makefile.am eog-3.27.90/data/icons/32x32/Makefile.am --- eog-3.26.2/data/icons/32x32/Makefile.am 2016-08-21 15:12:17.000000000 +0000 +++ eog-3.27.90/data/icons/32x32/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,17 +0,0 @@ -size = 32x32 -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps - -dist_appicons_DATA = \ - apps/eog.png -dist_actionicons_DATA = \ - actions/eog-plugin.png \ - actions/slideshow-play.png - -noinst_DATA = \ - actions/eog-plugin.svg \ - actions/slideshow-play.svg - -EXTRA_DIST = $(noinst_DATA) - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/data/icons/32x32/Makefile.in eog-3.27.90/data/icons/32x32/Makefile.in --- eog-3.26.2/data/icons/32x32/Makefile.in 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/data/icons/32x32/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,612 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/32x32 -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(dist_actionicons_DATA) \ - $(dist_appicons_DATA) $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(actioniconsdir)" \ - "$(DESTDIR)$(appiconsdir)" -DATA = $(dist_actionicons_DATA) $(dist_appicons_DATA) $(noinst_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -size = 32x32 -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps -dist_appicons_DATA = \ - apps/eog.png - -dist_actionicons_DATA = \ - actions/eog-plugin.png \ - actions/slideshow-play.png - -noinst_DATA = \ - actions/eog-plugin.svg \ - actions/slideshow-play.svg - -EXTRA_DIST = $(noinst_DATA) -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/32x32/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/32x32/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-dist_actioniconsDATA: $(dist_actionicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(actioniconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(actioniconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(actioniconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(actioniconsdir)" || exit $$?; \ - done - -uninstall-dist_actioniconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(actioniconsdir)'; $(am__uninstall_files_from_dir) -install-dist_appiconsDATA: $(dist_appicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(appiconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(appiconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appiconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(appiconsdir)" || exit $$?; \ - done - -uninstall-dist_appiconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(appiconsdir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(actioniconsdir)" "$(DESTDIR)$(appiconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_actioniconsDATA \ - install-dist_appiconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_actioniconsDATA \ - uninstall-dist_appiconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am \ - install-dist_actioniconsDATA install-dist_appiconsDATA \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags-am uninstall uninstall-am \ - uninstall-dist_actioniconsDATA uninstall-dist_appiconsDATA - -.PRECIOUS: Makefile - - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/data/icons/48x48/Makefile.am eog-3.27.90/data/icons/48x48/Makefile.am --- eog-3.26.2/data/icons/48x48/Makefile.am 2015-09-28 12:46:13.000000000 +0000 +++ eog-3.27.90/data/icons/48x48/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,7 +0,0 @@ -size = 48x48 -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions - -dist_actionicons_DATA = \ - actions/slideshow-play.png - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/data/icons/48x48/Makefile.in eog-3.27.90/data/icons/48x48/Makefile.in --- eog-3.26.2/data/icons/48x48/Makefile.in 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/data/icons/48x48/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,577 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/48x48 -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(dist_actionicons_DATA) \ - $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(actioniconsdir)" -DATA = $(dist_actionicons_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -size = 48x48 -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -dist_actionicons_DATA = \ - actions/slideshow-play.png - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/48x48/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/48x48/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-dist_actioniconsDATA: $(dist_actionicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(actioniconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(actioniconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(actioniconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(actioniconsdir)" || exit $$?; \ - done - -uninstall-dist_actioniconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(actioniconsdir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(actioniconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_actioniconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_actioniconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am \ - install-dist_actioniconsDATA install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ - uninstall-am uninstall-dist_actioniconsDATA - -.PRECIOUS: Makefile - - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/data/icons/Makefile.am eog-3.27.90/data/icons/Makefile.am --- eog-3.26.2/data/icons/Makefile.am 2017-11-08 20:33:41.000000000 +0000 +++ eog-3.27.90/data/icons/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,16 +0,0 @@ -SUBDIRS = 16x16 22x22 24x24 32x32 48x48 256x256 scalable - -gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor - -install-data-hook: update-icon-cache -uninstall-hook: update-icon-cache -update-icon-cache: - @-if test -z "$(DESTDIR)"; then \ - echo "Updating Gtk icon cache."; \ - $(gtk_update_icon_cache); \ - else \ - echo "*** Icon cache not updated. After (un)install, run this:"; \ - echo "*** $(gtk_update_icon_cache)"; \ - fi - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/data/icons/Makefile.in eog-3.27.90/data/icons/Makefile.in --- eog-3.26.2/data/icons/Makefile.in 2017-11-08 20:34:32.000000000 +0000 +++ eog-3.27.90/data/icons/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,713 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - distdir -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = 16x16 22x22 24x24 32x32 48x48 256x256 scalable -gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-data-hook -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) uninstall-hook -.MAKE: $(am__recursive_targets) install-am install-data-am \ - install-strip uninstall-am - -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ - check-am clean clean-generic clean-libtool cscopelist-am ctags \ - ctags-am distclean distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am \ - install-data-hook install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ - uninstall-am uninstall-hook - -.PRECIOUS: Makefile - - -install-data-hook: update-icon-cache -uninstall-hook: update-icon-cache -update-icon-cache: - @-if test -z "$(DESTDIR)"; then \ - echo "Updating Gtk icon cache."; \ - $(gtk_update_icon_cache); \ - else \ - echo "*** Icon cache not updated. After (un)install, run this:"; \ - echo "*** $(gtk_update_icon_cache)"; \ - fi - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/data/icons/meson.build eog-3.27.90/data/icons/meson.build --- eog-3.26.2/data/icons/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/data/icons/meson.build 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,44 @@ +icon_sizes = [ + '16x16', + '22x22', + '24x24', + '32x32', + '256x256' +] + +foreach icon_size: icon_sizes + install_subdir( + join_paths(icon_size, 'apps'), + install_dir: join_paths(eog_datadir, 'icons', 'hicolor', icon_size) + ) +endforeach + +install_data( + 'scalable/apps/eog-symbolic.svg', + install_dir: join_paths(eog_datadir, 'icons', 'hicolor', 'scalable', 'apps') +) + +icon_sizes = [ + ['16x16', ['slideshow-play.png', 'eog-plugin.png']], + ['22x22', ['slideshow-play.png', 'eog-plugin.png']], + ['24x24', ['slideshow-play.png']], + ['32x32', ['slideshow-play.png', 'eog-plugin.png']], + ['48x48', ['slideshow-play.png']] +] + +foreach icon_size: icon_sizes + actions_icons = [] + foreach file: icon_size[1] + actions_icons += files(join_paths(icon_size[0], 'actions', file)) + endforeach + + install_data( + actions_icons, + install_dir: join_paths(eog_pkgdatadir, 'icons', 'hicolor', icon_size[0], 'actions') + ) +endforeach + +install_subdir( + 'scalable/actions', + install_dir: join_paths(eog_pkgdatadir, 'icons', 'hicolor', 'scalable') +) diff -Nru eog-3.26.2/data/icons/scalable/Makefile.am eog-3.27.90/data/icons/scalable/Makefile.am --- eog-3.26.2/data/icons/scalable/Makefile.am 2016-08-21 15:12:17.000000000 +0000 +++ eog-3.27.90/data/icons/scalable/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,18 +0,0 @@ -size = scalable -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps - -dist_actionicons_DATA = \ - actions/eog-plugin.svg \ - actions/eog-image-gallery-symbolic.svg \ - actions/slideshow-play.svg - -dist_appicons_DATA = \ - apps/eog-symbolic.svg - -noinst_DATA = \ - apps/eog-onecanvas.svg - -EXTRA_DIST = $(noinst_DATA) - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/data/icons/scalable/Makefile.in eog-3.27.90/data/icons/scalable/Makefile.in --- eog-3.26.2/data/icons/scalable/Makefile.in 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/data/icons/scalable/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,612 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/scalable -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(dist_actionicons_DATA) \ - $(dist_appicons_DATA) $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(actioniconsdir)" \ - "$(DESTDIR)$(appiconsdir)" -DATA = $(dist_actionicons_DATA) $(dist_appicons_DATA) $(noinst_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -size = scalable -actioniconsdir = $(pkgdatadir)/icons/hicolor/$(size)/actions -appiconsdir = $(datadir)/icons/hicolor/$(size)/apps -dist_actionicons_DATA = \ - actions/eog-plugin.svg \ - actions/eog-image-gallery-symbolic.svg \ - actions/slideshow-play.svg - -dist_appicons_DATA = \ - apps/eog-symbolic.svg - -noinst_DATA = \ - apps/eog-onecanvas.svg - -EXTRA_DIST = $(noinst_DATA) -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/scalable/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/scalable/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-dist_actioniconsDATA: $(dist_actionicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(actioniconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(actioniconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(actioniconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(actioniconsdir)" || exit $$?; \ - done - -uninstall-dist_actioniconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_actionicons_DATA)'; test -n "$(actioniconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(actioniconsdir)'; $(am__uninstall_files_from_dir) -install-dist_appiconsDATA: $(dist_appicons_DATA) - @$(NORMAL_INSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(appiconsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(appiconsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appiconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(appiconsdir)" || exit $$?; \ - done - -uninstall-dist_appiconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_appicons_DATA)'; test -n "$(appiconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(appiconsdir)'; $(am__uninstall_files_from_dir) -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(actioniconsdir)" "$(DESTDIR)$(appiconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-dist_actioniconsDATA \ - install-dist_appiconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_actioniconsDATA \ - uninstall-dist_appiconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am \ - install-dist_actioniconsDATA install-dist_appiconsDATA \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags-am uninstall uninstall-am \ - uninstall-dist_actioniconsDATA uninstall-dist_appiconsDATA - -.PRECIOUS: Makefile - - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/data/Makefile.am eog-3.27.90/data/Makefile.am --- eog-3.26.2/data/Makefile.am 2017-11-08 20:33:41.000000000 +0000 +++ eog-3.27.90/data/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,60 +0,0 @@ -SUBDIRS = pixmaps icons - -# .desktop file -DESKTOP_IN_FILES= eog.desktop.in.in -DESKTOP_FILES= $(DESKTOP_IN_FILES:.desktop.in.in=.desktop) - -desktopdir = $(datadir)/applications -desktop_DATA = $(DESKTOP_FILES) - -$(desktop_DATA): %.desktop: %.desktop.in - $(AM_V_GEN)$(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@ - -# AppData -appdatadir = $(datadir)/appdata -appdata_in_files = eog.appdata.xml.in -appdata_DATA = $(appdata_in_files:.xml.in=.xml) -$(appdata_DATA): $(appdata_in_files) - $(AM_V_GEN)$(MSGFMT) --xml --template $< -d $(top_srcdir)/po -o $@ - -# GSettings -gsettings_ENUM_NAMESPACE = org.gnome.eog -gsettings_ENUM_FILES = $(top_srcdir)/src/eog-scroll-view.h \ - $(top_srcdir)/src/eog-window.h -gsettings_SCHEMAS = org.gnome.eog.gschema.xml - -@GSETTINGS_RULES@ - -gsettingsconvertdir = $(datadir)/GConf/gsettings -gsettingsconvert_DATA = eog.convert - -# pkg-config -pkgconfigdir = $(libdir)/pkgconfig -pkgconfig_DATA = eog.pc - - -EXTRA_DIST = \ - fullscreen-toolbar.ui \ - eog.css \ - eog-app-menu.ui \ - eog-gear-menu.ui \ - eog-image-properties-dialog.ui \ - eog-multiple-save-as-dialog.ui \ - eog-preferences-dialog.ui \ - eog-zoom-entry.ui \ - help-overlay.ui \ - metadata-sidebar.ui \ - popup-menus.ui \ - $(DESKTOP_IN_FILES) \ - $(appdata_in_files) \ - eog.convert - -CLEANFILES = \ - $(DESKTOP_FILES) \ - $(appdata_DATA) - -DISTCLEANFILES = \ - $(DESKTOP_FILES) \ - $(gsettings_SCHEMAS) - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/data/Makefile.in eog-3.27.90/data/Makefile.in --- eog-3.26.2/data/Makefile.in 2017-11-08 20:34:31.000000000 +0000 +++ eog-3.27.90/data/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,885 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = eog.pc eog.desktop.in org.gnome.eog.gschema.xml -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(appdatadir)" "$(DESTDIR)$(desktopdir)" \ - "$(DESTDIR)$(gsettingsconvertdir)" "$(DESTDIR)$(pkgconfigdir)" -DATA = $(appdata_DATA) $(desktop_DATA) $(gsettingsconvert_DATA) \ - $(pkgconfig_DATA) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - distdir -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/eog.desktop.in.in \ - $(srcdir)/eog.pc.in $(srcdir)/org.gnome.eog.gschema.xml.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = pixmaps icons - -# .desktop file -DESKTOP_IN_FILES = eog.desktop.in.in -DESKTOP_FILES = $(DESKTOP_IN_FILES:.desktop.in.in=.desktop) -desktopdir = $(datadir)/applications -desktop_DATA = $(DESKTOP_FILES) - -# AppData -appdatadir = $(datadir)/appdata -appdata_in_files = eog.appdata.xml.in -appdata_DATA = $(appdata_in_files:.xml.in=.xml) - -# GSettings -gsettings_ENUM_NAMESPACE = org.gnome.eog -gsettings_ENUM_FILES = $(top_srcdir)/src/eog-scroll-view.h \ - $(top_srcdir)/src/eog-window.h - -gsettings_SCHEMAS = org.gnome.eog.gschema.xml -gsettingsconvertdir = $(datadir)/GConf/gsettings -gsettingsconvert_DATA = eog.convert - -# pkg-config -pkgconfigdir = $(libdir)/pkgconfig -pkgconfig_DATA = eog.pc -EXTRA_DIST = \ - fullscreen-toolbar.ui \ - eog.css \ - eog-app-menu.ui \ - eog-gear-menu.ui \ - eog-image-properties-dialog.ui \ - eog-multiple-save-as-dialog.ui \ - eog-preferences-dialog.ui \ - eog-zoom-entry.ui \ - help-overlay.ui \ - metadata-sidebar.ui \ - popup-menus.ui \ - $(DESKTOP_IN_FILES) \ - $(appdata_in_files) \ - eog.convert - -CLEANFILES = \ - $(DESKTOP_FILES) \ - $(appdata_DATA) - -DISTCLEANFILES = \ - $(DESKTOP_FILES) \ - $(gsettings_SCHEMAS) - -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -eog.pc: $(top_builddir)/config.status $(srcdir)/eog.pc.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -eog.desktop.in: $(top_builddir)/config.status $(srcdir)/eog.desktop.in.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -org.gnome.eog.gschema.xml: $(top_builddir)/config.status $(srcdir)/org.gnome.eog.gschema.xml.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-appdataDATA: $(appdata_DATA) - @$(NORMAL_INSTALL) - @list='$(appdata_DATA)'; test -n "$(appdatadir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(appdatadir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(appdatadir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appdatadir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(appdatadir)" || exit $$?; \ - done - -uninstall-appdataDATA: - @$(NORMAL_UNINSTALL) - @list='$(appdata_DATA)'; test -n "$(appdatadir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(appdatadir)'; $(am__uninstall_files_from_dir) -install-desktopDATA: $(desktop_DATA) - @$(NORMAL_INSTALL) - @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \ - done - -uninstall-desktopDATA: - @$(NORMAL_UNINSTALL) - @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir) -install-gsettingsconvertDATA: $(gsettingsconvert_DATA) - @$(NORMAL_INSTALL) - @list='$(gsettingsconvert_DATA)'; test -n "$(gsettingsconvertdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(gsettingsconvertdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(gsettingsconvertdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(gsettingsconvertdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(gsettingsconvertdir)" || exit $$?; \ - done - -uninstall-gsettingsconvertDATA: - @$(NORMAL_UNINSTALL) - @list='$(gsettingsconvert_DATA)'; test -n "$(gsettingsconvertdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(gsettingsconvertdir)'; $(am__uninstall_files_from_dir) -install-pkgconfigDATA: $(pkgconfig_DATA) - @$(NORMAL_INSTALL) - @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ - done - -uninstall-pkgconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile $(DATA) -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(appdatadir)" "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(gsettingsconvertdir)" "$(DESTDIR)$(pkgconfigdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: install-appdataDATA install-desktopDATA \ - install-gsettingsconvertDATA install-pkgconfigDATA - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-appdataDATA uninstall-desktopDATA \ - uninstall-gsettingsconvertDATA uninstall-pkgconfigDATA - -.MAKE: $(am__recursive_targets) install-am install-strip - -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ - check-am clean clean-generic clean-libtool cscopelist-am ctags \ - ctags-am distclean distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am html html-am info info-am \ - install install-am install-appdataDATA install-data \ - install-data-am install-desktopDATA install-dvi install-dvi-am \ - install-exec install-exec-am install-gsettingsconvertDATA \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-pkgconfigDATA \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ - uninstall-am uninstall-appdataDATA uninstall-desktopDATA \ - uninstall-gsettingsconvertDATA uninstall-pkgconfigDATA - -.PRECIOUS: Makefile - - -$(desktop_DATA): %.desktop: %.desktop.in - $(AM_V_GEN)$(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@ -$(appdata_DATA): $(appdata_in_files) - $(AM_V_GEN)$(MSGFMT) --xml --template $< -d $(top_srcdir)/po -o $@ - -@GSETTINGS_RULES@ - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/data/meson.build eog-3.27.90/data/meson.build --- eog-3.26.2/data/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/data/meson.build 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,66 @@ +subdir('icons') + +resource_data = files( + 'pixmaps/thumbnail-frame.png', + 'eog-app-menu.ui', + 'eog-gear-menu.ui', + 'eog-image-properties-dialog.ui', + 'eog-multiple-save-as-dialog.ui', + 'eog-preferences-dialog.ui', + 'eog-zoom-entry.ui', + 'eog.css', + 'fullscreen-toolbar.ui', + 'help-overlay.ui', + 'metadata-sidebar.ui', + 'popup-menus.ui' +) + +desktop_conf = configuration_data() +desktop_conf.set('VERSION', eog_version) + +desktop = 'eog.desktop' + +desktop_in = configure_file( + input: desktop + '.in.in', + output: desktop + '.in', + configuration: desktop_conf +) + +i18n.merge_file( + desktop, + type: 'desktop', + input: desktop_in, + output: desktop, + po_dir: po_dir, + install: true, + install_dir: join_paths(eog_datadir, 'applications') +) + +appdata = 'eog.appdata.xml' + +i18n.merge_file( + appdata, + input: appdata + '.in', + output: appdata, + po_dir: po_dir, + install: true, + install_dir: join_paths(eog_datadir, 'metainfo') +) + +schema_conf = configuration_data() +schema_conf.set('GETTEXT_PACKAGE', meson.project_name()) + +schema = 'org.gnome.eog.gschema.xml' + +configure_file( + input: schema + '.in', + output: schema, + install: true, + install_dir: eog_schemadir, + configuration: schema_conf +) + +install_data( + 'eog.convert', + install_dir: join_paths(eog_datadir, 'GConf', 'gsettings') +) diff -Nru eog-3.26.2/data/pixmaps/Makefile.am eog-3.27.90/data/pixmaps/Makefile.am --- eog-3.26.2/data/pixmaps/Makefile.am 2016-02-14 19:04:16.000000000 +0000 +++ eog-3.27.90/data/pixmaps/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,4 +0,0 @@ -EXTRA_DIST = \ - thumbnail-frame.png - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/data/pixmaps/Makefile.in eog-3.27.90/data/pixmaps/Makefile.in --- eog-3.26.2/data/pixmaps/Makefile.in 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/data/pixmaps/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,519 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/pixmaps -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -EXTRA_DIST = \ - thumbnail-frame.png - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/pixmaps/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/pixmaps/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags-am uninstall uninstall-am - -.PRECIOUS: Makefile - - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/data/screenshot.png and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/data/screenshot.png differ diff -Nru eog-3.26.2/debian/changelog eog-3.27.90/debian/changelog --- eog-3.26.2/debian/changelog 2018-01-24 16:35:49.000000000 +0000 +++ eog-3.27.90/debian/changelog 2018-02-13 13:51:46.000000000 +0000 @@ -1,3 +1,16 @@ +eog (3.27.90-1ubuntu1) bionic; urgency=medium + + * Add workaround for Ubuntu translations issue + + -- Jeremy Bicha <jbicha@debian.org> Tue, 13 Feb 2018 08:51:46 -0500 + +eog (3.27.90-1) experimental; urgency=medium + + * New upstream development release + * Build with meson + + -- Jeremy Bicha <jbicha@debian.org> Tue, 13 Feb 2018 08:31:52 -0500 + eog (3.26.2-3) unstable; urgency=medium * Update Vcs fields for migration to https://salsa.debian.org/ diff -Nru eog-3.26.2/debian/control eog-3.27.90/debian/control --- eog-3.26.2/debian/control 2018-01-24 16:35:49.000000000 +0000 +++ eog-3.27.90/debian/control 2018-02-13 13:51:46.000000000 +0000 @@ -5,13 +5,14 @@ Source: eog Section: gnome Priority: optional -Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org> -Uploaders: Iain Lane <laney@debian.org>, Jeremy Bicha <jbicha@debian.org>, Laurent Bigonville <bigon@debian.org>, Michael Biebl <biebl@debian.org> -Build-Depends: debhelper (>= 11), +Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com> +XSBC-Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org> +Uploaders: Jeremy Bicha <jbicha@debian.org>, Laurent Bigonville <bigon@debian.org>, Michael Biebl <biebl@debian.org> +Build-Depends: debhelper (>= 11.1.3), gnome-pkg-tools (>= 0.10), - gnome-common, gtk-doc-tools (>= 1.16), - intltool (>= 0.40.0), + itstool, + meson (>= 0.43.0), pkg-config, libgtk-3-dev (>= 3.22.0), libgdk-pixbuf2.0-dev (>= 2.36.5), @@ -20,7 +21,6 @@ shared-mime-info (>= 0.20), gsettings-desktop-schemas-dev (>= 2.91.92), libpeas-dev (>= 0.7.4), - yelp-tools, zlib1g-dev, libexif-dev (>= 0.6.14), liblcms2-dev, diff -Nru eog-3.26.2/debian/control.in eog-3.27.90/debian/control.in --- eog-3.26.2/debian/control.in 2018-01-24 16:35:49.000000000 +0000 +++ eog-3.27.90/debian/control.in 2018-02-13 13:51:46.000000000 +0000 @@ -1,13 +1,14 @@ Source: eog Section: gnome Priority: optional -Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org> +Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com> +XSBC-Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org> Uploaders: @GNOME_TEAM@ -Build-Depends: debhelper (>= 11), +Build-Depends: debhelper (>= 11.1.3), gnome-pkg-tools (>= 0.10), - gnome-common, gtk-doc-tools (>= 1.16), - intltool (>= 0.40.0), + itstool, + meson (>= 0.43.0), pkg-config, libgtk-3-dev (>= 3.22.0), libgdk-pixbuf2.0-dev (>= 2.36.5), @@ -16,7 +17,6 @@ shared-mime-info (>= 0.20), gsettings-desktop-schemas-dev (>= 2.91.92), libpeas-dev (>= 0.7.4), - yelp-tools, zlib1g-dev, libexif-dev (>= 0.6.14), liblcms2-dev, diff -Nru eog-3.26.2/debian/eog.install eog-3.27.90/debian/eog.install --- eog-3.26.2/debian/eog.install 2018-01-24 16:35:49.000000000 +0000 +++ eog-3.27.90/debian/eog.install 2018-02-13 13:51:46.000000000 +0000 @@ -1,12 +1,12 @@ usr/bin -usr/share/appdata +usr/share/applications usr/share/eog/icons usr/share/glib-2.0/schemas usr/share/GConf/gsettings usr/share/help usr/share/icons usr/share/locale -usr/share/applications +usr/share/metainfo usr/lib/*/eog/*.so usr/lib/*/eog/plugins/*plugin usr/lib/*/eog/plugins/*.so diff -Nru eog-3.26.2/debian/rules eog-3.27.90/debian/rules --- eog-3.26.2/debian/rules 2018-01-24 16:35:49.000000000 +0000 +++ eog-3.27.90/debian/rules 2018-02-13 13:51:46.000000000 +0000 @@ -7,18 +7,16 @@ %: dh $@ --with gir,gnome -override_dh_autoreconf: - dh_autoreconf --as-needed - override_dh_auto_configure: - dh_auto_configure -- --enable-gtk-doc + dh_auto_configure -- -Dgtk_doc=true -override_dh_install: - find debian/tmp -name '*.la' -print -delete - dh_install - override_dh_missing: dh_missing --fail-missing override_dh_girepository: dh_girepository -ldebian/tmp/usr/share/eog/gir-1.0/ /usr/lib/$(DEB_HOST_MULTIARCH)/eog/girepository-1.0/ + +# Needed by Ubuntu +override_dh_translations: + ninja -C obj-$(DEB_HOST_GNU_TYPE) eog-pot + dh_translations diff -Nru eog-3.26.2/debian/watch eog-3.27.90/debian/watch --- eog-3.26.2/debian/watch 2018-01-24 16:35:49.000000000 +0000 +++ eog-3.27.90/debian/watch 2018-02-13 13:51:46.000000000 +0000 @@ -1,3 +1,3 @@ version=4 -https://download.gnome.org/sources/@PACKAGE@/([\d\.]+[02468])/ \ +https://download.gnome.org/sources/@PACKAGE@/([\d\.]+)/ \ @PACKAGE@@ANY_VERSION@\.tar\.xz diff -Nru eog-3.26.2/depcomp eog-3.27.90/depcomp --- eog-3.26.2/depcomp 2017-11-08 19:35:59.000000000 +0000 +++ eog-3.27.90/depcomp 1970-01-01 00:00:00.000000000 +0000 @@ -1,791 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2016-01-11.22; # UTC - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by 'PROGRAMS ARGS'. - object Object file output by 'PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputting dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to <bug-automake@gnu.org>. -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -# Get the directory component of the given path, and save it in the -# global variables '$dir'. Note that this directory component will -# be either empty or ending with a '/' character. This is deliberate. -set_dir_from () -{ - case $1 in - */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; - *) dir=;; - esac -} - -# Get the suffix-stripped basename of the given path, and save it the -# global variable '$base'. -set_base_from () -{ - base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` -} - -# If no dependency file was actually created by the compiler invocation, -# we still have to create a dummy depfile, to avoid errors with the -# Makefile "include basename.Plo" scheme. -make_dummy_depfile () -{ - echo "#dummy" > "$depfile" -} - -# Factor out some common post-processing of the generated depfile. -# Requires the auxiliary global variable '$tmpdepfile' to be set. -aix_post_process_depfile () -{ - # If the compiler actually managed to produce a dependency file, - # post-process it. - if test -f "$tmpdepfile"; then - # Each line is of the form 'foo.o: dependency.h'. - # Do two passes, one to just change these to - # $object: dependency.h - # and one to simply output - # dependency.h: - # which is needed to avoid the deleted-header problem. - { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" - sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" - } > "$depfile" - rm -f "$tmpdepfile" - else - make_dummy_depfile - fi -} - -# A tabulation character. -tab=' ' -# A newline character. -nl=' -' -# Character ranges might be problematic outside the C locale. -# These definitions help. -upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ -lower=abcdefghijklmnopqrstuvwxyz -digits=0123456789 -alpha=${upper}${lower} - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Avoid interferences from the environment. -gccflag= dashmflag= - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -cygpath_u="cygpath -u -f -" -if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvisualcpp -fi - -if test "$depmode" = msvc7msys; then - # This is just like msvc7 but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvc7 -fi - -if test "$depmode" = xlc; then - # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. - gccflag=-qmakedep=gcc,-MF - depmode=gcc -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. -## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. -## (see the conditional assignment to $gccflag above). -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). Also, it might not be -## supported by the other compilers which use the 'gcc' depmode. -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The second -e expression handles DOS-style file names with drive - # letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the "deleted header file" problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. -## Some versions of gcc put a space before the ':'. On the theory -## that the space means something, we add a space to the output as -## well. hp depmode also adds that space, but also prefixes the VPATH -## to the object. Take care to not repeat it in the output. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like '#:fec' to the end of the - # dependency line. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ - | tr "$nl" ' ' >> "$depfile" - echo >> "$depfile" - # The second pass generates a dummy entry for each header file. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" - else - make_dummy_depfile - fi - rm -f "$tmpdepfile" - ;; - -xlc) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts '$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - set_dir_from "$object" - set_base_from "$object" - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - aix_post_process_depfile - ;; - -tcc) - # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 - # FIXME: That version still under development at the moment of writing. - # Make that this statement remains true also for stable, released - # versions. - # It will wrap lines (doesn't matter whether long or short) with a - # trailing '\', as in: - # - # foo.o : \ - # foo.c \ - # foo.h \ - # - # It will put a trailing '\' even on the last line, and will use leading - # spaces rather than leading tabs (at least since its commit 0394caf7 - # "Emit spaces for -MD"). - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. - # We have to change lines of the first kind to '$object: \'. - sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" - # And for each line of the second kind, we have to emit a 'dep.h:' - # dummy dependency, to avoid the deleted-header problem. - sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" - rm -f "$tmpdepfile" - ;; - -## The order of this option in the case statement is important, since the -## shell code in configure will try each of these formats in the order -## listed in this file. A plain '-MD' option would be understood by many -## compilers, so we must ensure this comes after the gcc and icc options. -pgcc) - # Portland's C compiler understands '-MD'. - # Will always output deps to 'file.d' where file is the root name of the - # source file under compilation, even if file resides in a subdirectory. - # The object file name does not affect the name of the '.d' file. - # pgcc 10.2 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using '\' : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - set_dir_from "$object" - # Use the source, not the object, to determine the base name, since - # that's sadly what pgcc will do too. - set_base_from "$source" - tmpdepfile=$base.d - - # For projects that build the same source file twice into different object - # files, the pgcc approach of using the *source* file root name can cause - # problems in parallel builds. Use a locking strategy to avoid stomping on - # the same $tmpdepfile. - lockdir=$base.d-lock - trap " - echo '$0: caught signal, cleaning up...' >&2 - rmdir '$lockdir' - exit 1 - " 1 2 13 15 - numtries=100 - i=$numtries - while test $i -gt 0; do - # mkdir is a portable test-and-set. - if mkdir "$lockdir" 2>/dev/null; then - # This process acquired the lock. - "$@" -MD - stat=$? - # Release the lock. - rmdir "$lockdir" - break - else - # If the lock is being held by a different process, wait - # until the winning process is done or we timeout. - while test -d "$lockdir" && test $i -gt 0; do - sleep 1 - i=`expr $i - 1` - done - fi - i=`expr $i - 1` - done - trap - 1 2 13 15 - if test $i -le 0; then - echo "$0: failed to acquire lock after $numtries attempts" >&2 - echo "$0: check lockdir '$lockdir'" >&2 - exit 1 - fi - - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - set_dir_from "$object" - set_base_from "$object" - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" - # Add 'dependent.h:' lines. - sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" - else - make_dummy_depfile - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in 'foo.d' instead, so we check for that too. - # Subdirectories are respected. - set_dir_from "$object" - set_base_from "$object" - - if test "$libtool" = yes; then - # Libtool generates 2 separate objects for the 2 libraries. These - # two compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir$base.o.d # libtool 1.5 - tmpdepfile2=$dir.libs/$base.o.d # Likewise. - tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - # Same post-processing that is required for AIX mode. - aix_post_process_depfile - ;; - -msvc7) - if test "$libtool" = yes; then - showIncludes=-Wc,-showIncludes - else - showIncludes=-showIncludes - fi - "$@" $showIncludes > "$tmpdepfile" - stat=$? - grep -v '^Note: including file: ' "$tmpdepfile" - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The first sed program below extracts the file names and escapes - # backslashes for cygpath. The second sed program outputs the file - # name when reading, but also accumulates all include files in the - # hold buffer in order to output them again at the end. This only - # works with sed implementations that can handle large buffers. - sed < "$tmpdepfile" -n ' -/^Note: including file: *\(.*\)/ { - s//\1/ - s/\\/\\\\/g - p -}' | $cygpath_u | sort -u | sed -n ' -s/ /\\ /g -s/\(.*\)/'"$tab"'\1 \\/p -s/.\(.*\) \\/\1:/ -H -$ { - s/.*/'"$tab"'/ - G - p -}' >> "$depfile" - echo >> "$depfile" # make sure the fragment doesn't end with a backslash - rm -f "$tmpdepfile" - ;; - -msvc7msys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove '-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for ':' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. - "$@" $dashmflag | - sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this sed invocation - # correctly. Breaking it into two sed invocations is a workaround. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no eat=no - for arg - do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - if test $eat = yes; then - eat=no - continue - fi - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -arch) - eat=yes ;; - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix=`echo "$object" | sed 's/^.*\././'` - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - # makedepend may prepend the VPATH from the source file name to the object. - # No need to regex-escape $object, excess matching of '.' is harmless. - sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process the last invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed '1,2d' "$tmpdepfile" \ - | tr ' ' "$nl" \ - | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove '-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E \ - | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - | sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - IFS=" " - for arg - do - case "$arg" in - -o) - shift - ;; - $object) - shift - ;; - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E 2>/dev/null | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" - echo "$tab" >> "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvcmsys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC0" -# time-stamp-end: "; # UTC" -# End: diff -Nru eog-3.26.2/doc/Makefile.am eog-3.27.90/doc/Makefile.am --- eog-3.26.2/doc/Makefile.am 2015-09-28 12:46:13.000000000 +0000 +++ eog-3.27.90/doc/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,4 +0,0 @@ -SUBDIRS = \ - reference - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/doc/Makefile.in eog-3.27.90/doc/Makefile.in --- eog-3.26.2/doc/Makefile.in 2017-11-08 19:35:59.000000000 +0000 +++ eog-3.27.90/doc/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,699 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = doc -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - distdir -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = \ - reference - -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign doc/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(am__recursive_targets) install-am install-strip - -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ - check-am clean clean-generic clean-libtool cscopelist-am ctags \ - ctags-am distclean distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags tags-am uninstall uninstall-am - -.PRECIOUS: Makefile - - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/doc/reference/eog-docs.xml eog-3.27.90/doc/reference/eog-docs.xml --- eog-3.26.2/doc/reference/eog-docs.xml 2017-11-08 19:36:03.000000000 +0000 +++ eog-3.27.90/doc/reference/eog-docs.xml 2018-02-12 20:46:58.000000000 +0000 @@ -60,9 +60,7 @@ <xi:include href="xml/eog-debug.xml"/> <xi:include href="xml/eog-uri-converter.xml"/> <xi:include href="xml/eog-util.xml"/> - <xi:include href="xml/eog-exif-util.xml"/> - <xi:include href="xml/eog-pixbuf-util.xml"/> <xi:include href="xml/zoom.xml"/> </chapter> diff -Nru eog-3.26.2/doc/reference/html/annotation-glossary.html eog-3.27.90/doc/reference/html/annotation-glossary.html --- eog-3.26.2/doc/reference/html/annotation-glossary.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/annotation-glossary.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ -<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> -<html> -<head> -<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> -<title>Annotation Glossary: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - -
-

-Annotation Glossary

-

E

-
element-type
-

Generics and defining elements of containers and arrays.

-

T

-
transfer full
-

Free data after the code is done.

-
transfer none
-

Don't free data after the code is done.

-
type
-

Override the parsed C type with given type.

-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/api-index.html eog-3.27.90/doc/reference/html/api-index.html --- eog-3.26.2/doc/reference/html/api-index.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/api-index.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,1584 +0,0 @@ - - - - -API Index: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-

-API Index

-

A

-
-EOG_APP, macro in eog-application -
-
-
-EogApplication, struct in EogApplication -
-
-
-eog_application_get_instance, function in EogApplication -
-
-
-eog_application_open_file_list, function in EogApplication -
-
-
-eog_application_open_uris, function in EogApplication -
-
-
-eog_application_open_uri_list, function in EogApplication -
-
-
-eog_application_open_window, function in EogApplication -
-
-
-eog_application_screensaver_disable, function in EogApplication -
-
-
-eog_application_screensaver_enable, function in EogApplication -
-
-

C

-
-EogClipboardHandler, struct in EogClipboardHandler -
-
-
-EogClipboardHandler:pixbuf, object property in EogClipboardHandler -
-
-
-EogClipboardHandler:uri, object property in EogClipboardHandler -
-
-
-eog_clipboard_handler_copy_to_clipboard, function in EogClipboardHandler -
-
-
-eog_clipboard_handler_new, function in EogClipboardHandler -
-
-
-EOG_CONF_DESKTOP_CAN_PRINT, macro in eog-config-keys -
-
-
-EOG_CONF_DESKTOP_CAN_SAVE, macro in eog-config-keys -
-
-
-EOG_CONF_DESKTOP_CAN_SETUP_PAGE, macro in eog-config-keys -
-
-
-EOG_CONF_DESKTOP_WALLPAPER, macro in eog-config-keys -
-
-
-EOG_CONF_FULLSCREEN_LOOP, macro in eog-config-keys -
-
-
-EOG_CONF_FULLSCREEN_SECONDS, macro in eog-config-keys -
-
-
-EOG_CONF_FULLSCREEN_UPSCALE, macro in eog-config-keys -
-
-
-EOG_CONF_PLUGINS_ACTIVE_PLUGINS, macro in eog-config-keys -
-
-
-EOG_CONF_UI, macro in eog-config-keys -
-
-
-EOG_CONF_UI_DISABLE_CLOSE_CONFIRMATION, macro in eog-config-keys -
-
-
-EOG_CONF_UI_DISABLE_TRASH_CONFIRMATION, macro in eog-config-keys -
-
-
-EOG_CONF_UI_FILECHOOSER_XDG_FALLBACK, macro in eog-config-keys -
-
-
-EOG_CONF_UI_IMAGE_GALLERY, macro in eog-config-keys -
-
-
-EOG_CONF_UI_IMAGE_GALLERY_POSITION, macro in eog-config-keys -
-
-
-EOG_CONF_UI_IMAGE_GALLERY_RESIZABLE, macro in eog-config-keys -
-
-
-EOG_CONF_UI_PROPSDIALOG_NETBOOK_MODE, macro in eog-config-keys -
-
-
-EOG_CONF_UI_SCROLL_BUTTONS, macro in eog-config-keys -
-
-
-EOG_CONF_UI_SIDEBAR, macro in eog-config-keys -
-
-
-EOG_CONF_UI_STATUSBAR, macro in eog-config-keys -
-
-
-EOG_CONF_VIEW, macro in eog-config-keys -
-
-
-EOG_CONF_VIEW_AUTOROTATE, macro in eog-config-keys -
-
-
-EOG_CONF_VIEW_BACKGROUND_COLOR, macro in eog-config-keys -
-
-
-EOG_CONF_VIEW_EXTRAPOLATE, macro in eog-config-keys -
-
-
-EOG_CONF_VIEW_INTERPOLATE, macro in eog-config-keys -
-
-
-EOG_CONF_VIEW_SCROLL_WHEEL_ZOOM, macro in eog-config-keys -
-
-
-EOG_CONF_VIEW_TRANSPARENCY, macro in eog-config-keys -
-
-
-EOG_CONF_VIEW_TRANS_COLOR, macro in eog-config-keys -
-
-
-EOG_CONF_VIEW_USE_BG_COLOR, macro in eog-config-keys -
-
-
-EOG_CONF_VIEW_ZOOM_MULTIPLIER, macro in eog-config-keys -
-
-

D

-
-EogDebug, enum in eog-debug -
-
-
-eog_debug, function in eog-debug -
-
-
-DEBUG_IMAGE_DATA, macro in eog-debug -
-
-
-DEBUG_IMAGE_LOAD, macro in eog-debug -
-
-
-DEBUG_IMAGE_SAVE, macro in eog-debug -
-
-
-eog_debug_init, function in eog-debug -
-
-
-DEBUG_JOBS, macro in eog-debug -
-
-
-DEBUG_LCMS, macro in eog-debug -
-
-
-DEBUG_LIST_STORE, macro in eog-debug -
-
-
-eog_debug_message, function in eog-debug -
-
-
-DEBUG_PLUGINS, macro in eog-debug -
-
-
-DEBUG_PREFERENCES, macro in eog-debug -
-
-
-DEBUG_PRINTING, macro in eog-debug -
-
-
-DEBUG_THUMBNAIL, macro in eog-debug -
-
-
-DEBUG_VIEW, macro in eog-debug -
-
-
-DEBUG_WINDOW, macro in eog-debug -
-
-

E

-
-eog_exif_data_copy, function in eog-exif-util -
-
-
-eog_exif_data_free, function in eog-exif-util -
-
-
-eog_exif_data_get_value, function in eog-exif-util -
-
-
-eog_exif_util_format_date, function in eog-exif-util -
-
-

F

-
-EogFileChooser, struct in EogFileChooser -
-
-
-eog_file_chooser_get_format, function in EogFileChooser -
-
-
-eog_file_chooser_new, function in EogFileChooser -
-
-
-EOG_FILE_FORMAT_JPEG, macro in EogImageSaveInfo -
-
-

I

-
-EogImage, struct in EogImage -
-
-
-EogImage::changed, object signal in EogImage -
-
-
-EogImage::file-changed, object signal in EogImage -
-
-
-EogImage::next-frame, object signal in EogImage -
-
-
-EogImage::save-progress, object signal in EogImage -
-
-
-EogImage::size-prepared, object signal in EogImage -
-
-
-EogImage::thumbnail-changed, object signal in EogImage -
-
-
-EogImageData, enum in eog-image -
-
-
-EogImageError, enum in eog-image -
-
-
-EogImageMetadataStatus, enum in eog-image -
-
-
-EogImageSaveInfo, struct in EogImageSaveInfo -
-
-
-EogImageStatus, enum in eog-image -
-
-
-eog_image_apply_display_profile, function in EogImage -
-
-
-eog_image_autorotate, function in EogImage -
-
-
-eog_image_cancel_load, function in EogImage -
-
-
-EOG_IMAGE_DATA_ALL, macro in eog-image -
-
-
-eog_image_data_ref, function in EogImage -
-
-
-eog_image_data_unref, function in EogImage -
-
-
-EOG_IMAGE_ERROR, macro in eog-image -
-
-
-eog_image_error_quark, function in EogImage -
-
-
-eog_image_file_changed, function in EogImage -
-
-
-eog_image_get_bytes, function in EogImage -
-
-
-eog_image_get_caption, function in EogImage -
-
-
-eog_image_get_collate_key, function in EogImage -
-
-
-eog_image_get_exif_info, function in EogImage -
-
-
-eog_image_get_file, function in EogImage -
-
-
-eog_image_get_metadata_status, function in EogImage -
-
-
-eog_image_get_pixbuf, function in EogImage -
-
-
-eog_image_get_profile, function in EogImage -
-
-
-eog_image_get_size, function in EogImage -
-
-
-eog_image_get_status, function in EogImage -
-
-
-eog_image_get_supported_mime_types, function in EogImage -
-
-
-eog_image_get_svg, function in EogImage -
-
-
-eog_image_get_thumbnail, function in EogImage -
-
-
-eog_image_get_transform, function in EogImage -
-
-
-eog_image_get_uri_for_display, function in EogImage -
-
-
-eog_image_get_xmp_info, function in EogImage -
-
-
-eog_image_has_data, function in EogImage -
-
-
-eog_image_is_animation, function in EogImage -
-
-
-eog_image_is_file_changed, function in EogImage -
-
-
-eog_image_is_file_writable, function in EogImage -
-
-
-eog_image_is_modified, function in EogImage -
-
-
-eog_image_is_multipaged, function in EogImage -
-
-
-eog_image_is_supported_mime_type, function in EogImage -
-
-
-eog_image_is_svg, function in EogImage -
-
-
-eog_image_load, function in EogImage -
-
-
-eog_image_load_error_message_area_new, function in eog-error-message-area -
-
-
-eog_image_modified, function in EogImage -
-
-
-eog_image_new_file, function in EogImage -
-
-
-eog_image_save_as_by_info, function in EogImage -
-
-
-eog_image_save_by_info, function in EogImage -
-
-
-eog_image_save_info_new_from_file, function in EogImageSaveInfo -
-
-
-eog_image_save_info_new_from_image, function in EogImageSaveInfo -
-
-
-eog_image_save_info_new_from_uri, function in EogImageSaveInfo -
-
-
-eog_image_set_thumbnail, function in EogImage -
-
-
-eog_image_start_animation, function in EogImage -
-
-
-eog_image_transform, function in EogImage -
-
-
-eog_image_undo, function in EogImage -
-
-
-EOG_IS_JOB_LOAD, macro in eog-jobs -
-
-
-EOG_IS_JOB_MODEL, macro in eog-jobs -
-
-
-EOG_IS_JOB_SAVE, macro in eog-jobs -
-
-
-EOG_IS_JOB_SAVE_AS, macro in eog-jobs -
-
-
-EOG_IS_JOB_THUMBNAIL, macro in eog-jobs -
-
-
-EOG_IS_JOB_TRANSFORM, macro in eog-jobs -
-
-

J

-
-EogJob, struct in EogJob -
-
-
-EogJob::cancelled, object signal in EogJob -
-
-
-EogJob::finished, object signal in EogJob -
-
-
-EogJob::progress, object signal in EogJob -
-
-
-EogJobCopy, struct in EogJob -
-
-
-EogJobLoad, struct in EogJob -
-
-
-EogJobModel, struct in EogJob -
-
-
-EogJobSave, struct in EogJob -
-
-
-EogJobSaveAs, struct in EogJob -
-
-
-EogJobThumbnail, struct in EogJob -
-
-
-EogJobTransform, struct in EogJob -
-
-
-EOG_JOB_COPY, macro in eog-jobs -
-
-
-EOG_JOB_COPY_CLASS, macro in eog-jobs -
-
-
-eog_job_copy_get_type, function in EogJob -
-
-
-eog_job_copy_new, function in EogJob -
-
-
-EOG_JOB_LOAD, macro in eog-jobs -
-
-
-EOG_JOB_LOAD_CLASS, macro in eog-jobs -
-
-
-eog_job_load_get_type, function in EogJob -
-
-
-eog_job_load_new, function in EogJob -
-
-
-EOG_JOB_MODEL, macro in eog-jobs -
-
-
-EOG_JOB_MODEL_CLASS, macro in eog-jobs -
-
-
-eog_job_model_get_type, function in EogJob -
-
-
-eog_job_model_new, function in EogJob -
-
-
-eog_job_run, function in EogJob -
-
-
-EOG_JOB_SAVE, macro in eog-jobs -
-
-
-EOG_JOB_SAVE_AS, macro in eog-jobs -
-
-
-EOG_JOB_SAVE_AS_CLASS, macro in eog-jobs -
-
-
-eog_job_save_as_get_type, function in EogJob -
-
-
-eog_job_save_as_new, function in EogJob -
-
-
-EOG_JOB_SAVE_CLASS, macro in eog-jobs -
-
-
-EOG_JOB_SAVE_GET_CLASS, macro in eog-jobs -
-
-
-eog_job_save_get_type, function in EogJob -
-
-
-eog_job_save_new, function in EogJob -
-
-
-eog_job_scheduler_add_job, function in EogJobScheduler -
-
-
-eog_job_scheduler_add_job_with_priority, function in EogJobScheduler -
-
-
-eog_job_scheduler_init, function in EogJobScheduler -
-
-
-eog_job_set_progress, function in EogJob -
-
-
-EOG_JOB_THUMBNAIL, macro in eog-jobs -
-
-
-EOG_JOB_THUMBNAIL_CLASS, macro in eog-jobs -
-
-
-eog_job_thumbnail_get_type, function in EogJob -
-
-
-eog_job_thumbnail_new, function in EogJob -
-
-
-EOG_JOB_TRANSFORM, macro in eog-jobs -
-
-
-EOG_JOB_TRANSFORM_CLASS, macro in eog-jobs -
-
-
-eog_job_transform_get_type, function in EogJob -
-
-
-eog_job_transform_new, function in EogJob -
-
-

L

-
-EogListStore, struct in EogListStore -
-
-
-EogListStoreColumn, enum in eog-list-store -
-
-
-eog_list_store_add_files, function in EogListStore -
-
-
-eog_list_store_append_image, function in EogListStore -
-
-
-eog_list_store_get_image_by_pos, function in EogListStore -
-
-
-eog_list_store_get_initial_pos, function in EogListStore -
-
-
-eog_list_store_get_pos_by_image, function in EogListStore -
-
-
-eog_list_store_get_pos_by_iter, function in EogListStore -
-
-
-eog_list_store_length, function in EogListStore -
-
-
-eog_list_store_new, function in EogListStore -
-
-
-eog_list_store_new_from_glist, function in EogListStore -
-
-
-eog_list_store_remove_image, function in EogListStore -
-
-
-eog_list_store_thumbnail_refresh, function in EogListStore -
-
-
-eog_list_store_thumbnail_set, function in EogListStore -
-
-
-eog_list_store_thumbnail_unset, function in EogListStore -
-
-
-EOG_LIST_STORE_THUMB_SIZE, macro in eog-list-store -
-
-

N

-
-eog_no_images_error_message_area_new, function in eog-error-message-area -
-
-

P

-
-eog_pixbuf_get_common_suffix, function in eog-pixbuf-util -
-
-
-eog_pixbuf_get_format, function in eog-pixbuf-util -
-
-
-eog_pixbuf_get_format_by_suffix, function in eog-pixbuf-util -
-
-
-eog_pixbuf_get_savable_formats, function in eog-pixbuf-util -
-
-
-eog_print_get_page_setup, function in eog-print -
-
-
-eog_print_get_print_settings, function in eog-print -
-
-
-eog_print_operation_new, function in eog-print -
-
-
-eog_print_set_page_setup, function in eog-print -
-
-
-eog_print_set_print_settings, function in eog-print -
-
-
-EogPropertiesDialog, struct in EogPropertiesDialog -
-
-
-EogPropertiesDialog:netbook-mode, object property in EogPropertiesDialog -
-
-
-EogPropertiesDialog:next-action, object property in EogPropertiesDialog -
-
-
-EogPropertiesDialog:prev-action, object property in EogPropertiesDialog -
-
-
-EogPropertiesDialog:thumbview, object property in EogPropertiesDialog -
-
-
-EogPropertiesDialogPage, enum in eog-properties-dialog -
-
-
-eog_properties_dialog_new, function in EogPropertiesDialog -
-
-
-eog_properties_dialog_set_netbook_mode, function in EogPropertiesDialog -
-
-
-eog_properties_dialog_set_page, function in EogPropertiesDialog -
-
-
-eog_properties_dialog_update, function in EogPropertiesDialog -
-
-

S

-
-eog_save_as_dialog_get_converter, function in eog-save-as-dialog-helper -
-
-
-eog_save_as_dialog_new, function in eog-save-as-dialog-helper -
-
-
-EogScrollView, struct in EogScrollView -
-
-
-EogScrollView::next-image, object signal in EogScrollView -
-
-
-EogScrollView::previous-image, object signal in EogScrollView -
-
-
-EogScrollView::rotation-changed, object signal in EogScrollView -
-
-
-EogScrollView::zoom-changed, object signal in EogScrollView -
-
-
-EogScrollView:antialiasing-in, object property in EogScrollView -
-
-
-EogScrollView:antialiasing-out, object property in EogScrollView -
-
-
-EogScrollView:background-color, object property in EogScrollView -
-
-
-EogScrollView:image, object property in EogScrollView -
-
-
-EogScrollView:scrollwheel-zoom, object property in EogScrollView -
-
-
-EogScrollView:transparency-color, object property in EogScrollView -
-
-
-EogScrollView:transparency-style, object property in EogScrollView -
-
-
-EogScrollView:use-background-color, object property in EogScrollView -
-
-
-EogScrollView:zoom-mode, object property in EogScrollView -
-
-
-EogScrollView:zoom-multiplier, object property in EogScrollView -
-
-
-eog_scroll_view_event_is_over_image, function in EogScrollView -
-
-
-eog_scroll_view_get_zoom, function in EogScrollView -
-
-
-eog_scroll_view_get_zoom_is_max, function in EogScrollView -
-
-
-eog_scroll_view_get_zoom_is_min, function in EogScrollView -
-
-
-eog_scroll_view_get_zoom_mode, function in EogScrollView -
-
-
-eog_scroll_view_hide_cursor, function in EogScrollView -
-
-
-eog_scroll_view_new, function in EogScrollView -
-
-
-eog_scroll_view_override_bg_color, function in EogScrollView -
-
-
-eog_scroll_view_scrollbars_visible, function in EogScrollView -
-
-
-eog_scroll_view_set_antialiasing_in, function in EogScrollView -
-
-
-eog_scroll_view_set_antialiasing_out, function in EogScrollView -
-
-
-eog_scroll_view_set_background_color, function in EogScrollView -
-
-
-eog_scroll_view_set_image, function in EogScrollView -
-
-
-eog_scroll_view_set_popup, function in EogScrollView -
-
-
-eog_scroll_view_set_scroll_wheel_zoom, function in EogScrollView -
-
-
-eog_scroll_view_set_transparency, function in EogScrollView -
-
-
-eog_scroll_view_set_transparency_color, function in EogScrollView -
-
-
-eog_scroll_view_set_use_bg_color, function in EogScrollView -
-
-
-eog_scroll_view_set_zoom, function in EogScrollView -
-
-
-eog_scroll_view_set_zoom_mode, function in EogScrollView -
-
-
-eog_scroll_view_set_zoom_multiplier, function in EogScrollView -
-
-
-eog_scroll_view_set_zoom_upscale, function in EogScrollView -
-
-
-eog_scroll_view_show_cursor, function in EogScrollView -
-
-
-eog_scroll_view_zoom_in, function in EogScrollView -
-
-
-eog_scroll_view_zoom_out, function in EogScrollView -
-
-
-eog_session_init, function in eog-session -
-
-
-eog_session_is_restored, function in eog-session -
-
-
-eog_session_load, function in eog-session -
-
-
-EogSidebar, struct in EogSidebar -
-
-
-EogSidebar::page-added, object signal in EogSidebar -
-
-
-EogSidebar::page-removed, object signal in EogSidebar -
-
-
-EogSidebar:current-page, object property in EogSidebar -
-
-
-eog_sidebar_add_page, function in EogSidebar -
-
-
-eog_sidebar_get_n_pages, function in EogSidebar -
-
-
-eog_sidebar_is_empty, function in EogSidebar -
-
-
-eog_sidebar_new, function in EogSidebar -
-
-
-eog_sidebar_remove_page, function in EogSidebar -
-
-
-eog_sidebar_set_page, function in EogSidebar -
-
-
-EogStartupFlags, enum in eog-window -
-
-
-EogStatusbar, struct in EogStatusbar -
-
-
-eog_statusbar_new, function in EogStatusbar -
-
-
-eog_statusbar_set_image_number, function in EogStatusbar -
-
-
-eog_statusbar_set_progress, function in EogStatusbar -
-
-

T

-
-eog_thumbnail_add_frame, function in eog-thumbnail -
-
-
-eog_thumbnail_fit_to_size, function in eog-thumbnail -
-
-
-eog_thumbnail_init, function in eog-thumbnail -
-
-
-eog_thumbnail_load, function in eog-thumbnail -
-
-
-EOG_THUMBNAIL_ORIGINAL_HEIGHT, macro in eog-thumbnail -
-
-
-EOG_THUMBNAIL_ORIGINAL_WIDTH, macro in eog-thumbnail -
-
-
-EogThumbNav, struct in EogThumbNav -
-
-
-EogThumbNav:mode, object property in EogThumbNav -
-
-
-EogThumbNav:show-buttons, object property in EogThumbNav -
-
-
-EogThumbNav:thumbview, object property in EogThumbNav -
-
-
-EogThumbNavMode, enum in eog-thumb-nav -
-
-
-EogThumbView, struct in EogThumbView -
-
-
-EogThumbViewSelectionChange, enum in eog-thumb-view -
-
-
-eog_thumb_nav_get_mode, function in EogThumbNav -
-
-
-eog_thumb_nav_get_show_buttons, function in EogThumbNav -
-
-
-eog_thumb_nav_new, function in EogThumbNav -
-
-
-eog_thumb_nav_set_mode, function in EogThumbNav -
-
-
-eog_thumb_nav_set_show_buttons, function in EogThumbNav -
-
-
-eog_thumb_view_get_first_selected_image, function in EogThumbView -
-
-
-eog_thumb_view_get_n_selected, function in EogThumbView -
-
-
-eog_thumb_view_get_selected_images, function in EogThumbView -
-
-
-eog_thumb_view_new, function in EogThumbView -
-
-
-eog_thumb_view_select_single, function in EogThumbView -
-
-
-eog_thumb_view_set_current_image, function in EogThumbView -
-
-
-eog_thumb_view_set_item_height, function in EogThumbView -
-
-
-eog_thumb_view_set_model, function in EogThumbView -
-
-
-eog_thumb_view_set_thumbnail_popup, function in EogThumbView -
-
-
-EogTransform, struct in EogTransform -
-
-
-EogTransformType, enum in eog-transform -
-
-
-eog_transform_apply, function in EogTransform -
-
-
-eog_transform_compose, function in EogTransform -
-
-
-eog_transform_flip_new, function in EogTransform -
-
-
-eog_transform_get_affine, function in EogTransform -
-
-
-eog_transform_get_transform_type, function in EogTransform -
-
-
-eog_transform_identity_new, function in EogTransform -
-
-
-eog_transform_is_identity, function in EogTransform -
-
-
-eog_transform_new, function in EogTransform -
-
-
-eog_transform_reverse, function in EogTransform -
-
-
-eog_transform_rotate_new, function in EogTransform -
-
-
-eog_transform_scale_new, function in EogTransform -
-
-
-EogTransparencyStyle, enum in EogScrollView -
-
-
-EOG_TYPE_JOB_LOAD, macro in eog-jobs -
-
-
-EOG_TYPE_JOB_MODEL, macro in eog-jobs -
-
-
-EOG_TYPE_JOB_SAVE, macro in eog-jobs -
-
-
-EOG_TYPE_JOB_SAVE_AS, macro in eog-jobs -
-
-
-EOG_TYPE_JOB_THUMBNAIL, macro in eog-jobs -
-
-
-EOG_TYPE_JOB_TRANSFORM, macro in eog-jobs -
-
-

U

-
-EogUCError, enum in eog-uri-converter -
-
-
-EogUCInfo, struct in eog-uri-converter -
-
-
-EogUCType, enum in eog-uri-converter -
-
-
-EOG_UC_ERROR, macro in eog-uri-converter -
-
-
-eog_uc_error_quark, function in EogURIConverter -
-
-
-EogURIConverter, struct in EogURIConverter -
-
-
-EogURIConverter:convert-spaces, object property in EogURIConverter -
-
-
-EogURIConverter:counter-n-digits, object property in EogURIConverter -
-
-
-EogURIConverter:counter-start, object property in EogURIConverter -
-
-
-EogURIConverter:n-images, object property in EogURIConverter -
-
-
-EogURIConverter:space-character, object property in EogURIConverter -
-
-
-eog_uri_converter_check, function in EogURIConverter -
-
-
-eog_uri_converter_do, function in EogURIConverter -
-
-
-eog_uri_converter_new, function in EogURIConverter -
-
-
-eog_uri_converter_preview, function in EogURIConverter -
-
-
-eog_uri_converter_print_list, function in EogURIConverter -
-
-
-eog_uri_converter_requires_exif, function in EogURIConverter -
-
-
-eog_util_dot_dir, function in eog-util -
-
-
-eog_util_filename_get_extension, function in eog-util -
-
-
-eog_util_file_is_persistent, function in eog-util -
-
-
-eog_util_launch_desktop_file, function in eog-util -
-
-
-eog_util_make_valid_utf8, function in eog-util -
-
-
-eog_util_parse_uri_string_list_to_file_list, function in eog-util -
-
-
-eog_util_show_help, function in eog-util -
-
-
-eog_util_strings_to_file_list, function in eog-util -
-
-
-eog_util_string_array_make_absolute, function in eog-util -
-
-
-eog_util_string_array_to_list, function in eog-util -
-
-
-eog_util_string_list_to_file_list, function in eog-util -
-
-

W

-
-EogWindow, struct in EogWindow -
-
-
-EogWindow::prepared, object signal in EogWindow -
-
-
-EogWindow:gallery-position, object property in EogWindow -
-
-
-EogWindow:gallery-resizable, object property in EogWindow -
-
-
-EogWindow:startup-flags, object property in EogWindow -
-
-
-EogWindowActivatable, struct in EogWindowActivatable -
-
-
-EogWindowActivatable:window, object property in EogWindowActivatable -
-
-
-EogWindowActivatableInterface, struct in EogWindowActivatable -
-
-
-EogWindowError, enum in eog-window -
-
-
-EogWindowGalleryPos, enum in eog-window -
-
-
-EogWindowMode, enum in eog-window -
-
-
-eog_window_activatable_activate, function in EogWindowActivatable -
-
-
-eog_window_activatable_deactivate, function in EogWindowActivatable -
-
-
-EOG_WINDOW_ERROR, macro in eog-window -
-
-
-eog_window_get_gear_menu_section, function in EogWindow -
-
-
-eog_window_get_image, function in EogWindow -
-
-
-eog_window_get_mode, function in EogWindow -
-
-
-eog_window_get_sidebar, function in EogWindow -
-
-
-eog_window_get_statusbar, function in EogWindow -
-
-
-eog_window_get_store, function in EogWindow -
-
-
-eog_window_get_thumb_nav, function in EogWindow -
-
-
-eog_window_get_thumb_view, function in EogWindow -
-
-
-eog_window_get_view, function in EogWindow -
-
-
-eog_window_is_empty, function in EogWindow -
-
-
-eog_window_new, function in EogWindow -
-
-
-eog_window_open_file_list, function in EogWindow -
-
-
-eog_window_reload_image, function in EogWindow -
-
-
-eog_window_set_mode, function in EogWindow -
-
-

Z

-
-EogZoomMode, enum in EogScrollView -
-
-
-zoom_fit_scale, function in zoom -
-
-
-zoom_fit_size, function in zoom -
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/ch01.html eog-3.27.90/doc/reference/html/ch01.html --- eog-3.26.2/doc/reference/html/ch01.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/ch01.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,70 +0,0 @@ - - - - -User Interface: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-

-User Interface

-
-
-EogPropertiesDialog -
-
-EogListStore -
-
-EogFileChooser -
-
-EogThumbNav -
-
-EogThumbView -
-
-EogScrollView -
-
-EogWindow -
-
-EogWindowActivatable -
-
-EogStatusbar -
-
-EogSidebar -
-
-eog-thumbnail -
-
-eog-save-as-dialog-helper -
-
-eog-error-message-area -
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/ch02.html eog-3.27.90/doc/reference/html/ch02.html --- eog-3.26.2/doc/reference/html/ch02.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/ch02.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - -Image data and manipulation: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-

-Image data and manipulation

-
-
-EogImage -
-
-EogImageSaveInfo -
-
-EogTransform -
-
-EogClipboardHandler -
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/ch03.html eog-3.27.90/doc/reference/html/ch03.html --- eog-3.26.2/doc/reference/html/ch03.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/ch03.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - -Printing: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-

-Printing

-
-eog-print -
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/ch04.html eog-3.27.90/doc/reference/html/ch04.html --- eog-3.26.2/doc/reference/html/ch04.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/ch04.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - -Application and configuration: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-

-Application and configuration

-
-
-EogApplication -
-
-eog-session -
-
-eog-config-keys -
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/ch05.html eog-3.27.90/doc/reference/html/ch05.html --- eog-3.26.2/doc/reference/html/ch05.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/ch05.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - -Utilities: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-

-Utilities

-
-
-eog-debug -
-
-EogURIConverter -
-
-eog-util -
-
-eog-exif-util -
-
-eog-pixbuf-util -
-
-zoom -
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/ch06.html eog-3.27.90/doc/reference/html/ch06.html --- eog-3.26.2/doc/reference/html/ch06.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/ch06.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - -Asynchronous jobs: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-

-Asynchronous jobs

-
-
-EogJob -
-
-EogJobScheduler -
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/EogClipboardHandler.html eog-3.27.90/doc/reference/html/EogClipboardHandler.html --- eog-3.26.2/doc/reference/html/EogClipboardHandler.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/EogClipboardHandler.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,152 +0,0 @@ - - - - -EogClipboardHandler: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogClipboardHandler

-

EogClipboardHandler

-
-
-

Functions

-
---- - - - - - - - - - - -
-EogClipboardHandler * - -eog_clipboard_handler_new () -
-void - -eog_clipboard_handler_copy_to_clipboard () -
-
-
-

Properties

-
----- - - - - - - - - - - - - -
-GdkPixbuf *pixbufRead / Write / Construct Only
-gchar *uriRead / Write / Construct Only
-
-
-

Types and Values

-
---- - - - - -
structEogClipboardHandler
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GInitiallyUnowned
-        ╰── EogClipboardHandler
-
-
-
-

Description

-
-
-

Functions

-
-

eog_clipboard_handler_new ()

-
EogClipboardHandler *
-eog_clipboard_handler_new (EogImage *img);
-
-
-
-

eog_clipboard_handler_copy_to_clipboard ()

-
void
-eog_clipboard_handler_copy_to_clipboard
-                               (EogClipboardHandler *handler,
-                                GtkClipboard *clipboard);
-
-
-
-

Types and Values

-
-

struct EogClipboardHandler

-
struct EogClipboardHandler;
-
-
-
-

Property Details

-
-

The “pixbuf” property

-
  “pixbuf”                   GdkPixbuf *
-

Flags: Read / Write / Construct Only

-
-
-
-

The “uri” property

-
  “uri”                      gchar *
-

Flags: Read / Write / Construct Only

-

Default value: NULL

-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog.devhelp2 eog-3.27.90/doc/reference/html/eog.devhelp2 --- eog-3.26.2/doc/reference/html/eog.devhelp2 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog.devhelp2 1970-01-01 00:00:00.000000000 +0000 @@ -1,533 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru eog-3.26.2/doc/reference/html/eog-eog-application.html eog-3.27.90/doc/reference/html/eog-eog-application.html --- eog-3.26.2/doc/reference/html/eog-eog-application.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-application.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,398 +0,0 @@ - - - - -EogApplication: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogApplication

-

EogApplication

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-EogApplication * - -eog_application_get_instance () -
-gboolean - -eog_application_open_window () -
-gboolean - -eog_application_open_uri_list () -
-gboolean - -eog_application_open_file_list () -
-gboolean - -eog_application_open_uris () -
-void - -eog_application_screensaver_enable () -
-void - -eog_application_screensaver_disable () -
-
-
-

Types and Values

-
---- - - - - - - - - - - -
#defineEOG_APP
structEogApplication
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GApplication
-        ╰── GtkApplication
-            ╰── EogApplication
-
-
-
-

Implemented Interfaces

-

-EogApplication implements - GActionGroup and GActionMap.

-
-
-

Description

-
-
-

Functions

-
-

eog_application_get_instance ()

-
EogApplication *
-eog_application_get_instance (void);
-

Returns a singleton instance of EogApplication currently running. -If not running yet, it will create one.

-
-

Returns

-

a running EogApplication.

-

[transfer none]

-
-
-
-
-

eog_application_open_window ()

-
gboolean
-eog_application_open_window (EogApplication *application,
-                             guint timestamp,
-                             EogStartupFlags flags,
-                             GError **error);
-

Opens and presents an empty EogWindow to the user. If there is -an empty window already open, this will be used. Otherwise, a -new one will be instantiated.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - - - - - - -

application

An EogApplication.

 

timestamp

The timestamp of the user interaction which triggered this call -(see gtk_window_present_with_time()).

 

flags

A set of EogStartupFlags influencing a new windows' state.

 

error

Return location for a GError, or NULL to ignore errors.

 
-
-
-

Returns

-

FALSE if application -is invalid, TRUE otherwise

-
-
-
-
-

eog_application_open_uri_list ()

-
gboolean
-eog_application_open_uri_list (EogApplication *application,
-                               GSList *uri_list,
-                               guint timestamp,
-                               EogStartupFlags flags,
-                               GError **error);
-

Opens a list of images, from a list of URIs. See -eog_application_open_file_list() for details.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

application

An EogApplication.

 

uri_list

A list of URIs.

[element-type utf8]

timestamp

The timestamp of the user interaction which triggered this call -(see gtk_window_present_with_time()).

 

flags

A set of EogStartupFlags influencing a new windows' state.

 

error

Return location for a GError, or NULL to ignore errors.

 
-
-
-

Returns

-

Currently always TRUE.

-
-
-
-
-

eog_application_open_file_list ()

-
gboolean
-eog_application_open_file_list (EogApplication *application,
-                                GSList *file_list,
-                                guint timestamp,
-                                EogStartupFlags flags,
-                                GError **error);
-

Opens a list of files in a EogWindow. If an EogWindow displaying the first -image in the list is already open, this will be used. Otherwise, an empty -EogWindow is used, either already existing or newly created. -If the EOG_STARTUP_SINGLE_WINDOW flag is set, the files are opened in the -first EogWindow and no new one is opened.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

application

An EogApplication.

 

file_list

A list of GFiles.

[element-type GFile]

timestamp

The timestamp of the user interaction which triggered this call -(see gtk_window_present_with_time()).

 

flags

A set of EogStartupFlags influencing a new windows' state.

 

error

Return location for a GError, or NULL to ignore errors.

 
-
-
-

Returns

-

Currently always TRUE.

-
-
-
-
-

eog_application_open_uris ()

-
gboolean
-eog_application_open_uris (EogApplication *application,
-                           gchar **uris,
-                           guint timestamp,
-                           EogStartupFlags flags,
-                           GError **error);
-

Opens a list of images, from a list of URI strings. See -eog_application_open_file_list() for details.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

application

an EogApplication

 

uris

A GList of URI strings.

 

timestamp

The timestamp of the user interaction which triggered this call -(see gtk_window_present_with_time()).

 

flags

A set of EogStartupFlags influencing a new windows' state.

 

error

Return location for a GError, or NULL to ignore errors.

 
-
-
-

Returns

-

Currently always TRUE.

-
-
-
-
-

eog_application_screensaver_enable ()

-
void
-eog_application_screensaver_enable (EogApplication *application);
-
-
-
-

eog_application_screensaver_disable ()

-
void
-eog_application_screensaver_disable (EogApplication *application);
-
-
-
-

Types and Values

-
-

EOG_APP

-
#define EOG_APP				(eog_application_get_instance ())
-
-
-
-
-

struct EogApplication

-
struct EogApplication;
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-config-keys.html eog-3.27.90/doc/reference/html/eog-eog-config-keys.html --- eog-3.26.2/doc/reference/html/eog-eog-config-keys.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-config-keys.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,348 +0,0 @@ - - - - -eog-config-keys: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

eog-config-keys

-

eog-config-keys

-
-
-

Types and Values

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#defineEOG_CONF_DESKTOP_WALLPAPER
#defineEOG_CONF_DESKTOP_CAN_SAVE
#defineEOG_CONF_DESKTOP_CAN_PRINT
#defineEOG_CONF_DESKTOP_CAN_SETUP_PAGE
#defineEOG_CONF_VIEW
#defineEOG_CONF_VIEW_INTERPOLATE
#defineEOG_CONF_VIEW_SCROLL_WHEEL_ZOOM
#defineEOG_CONF_VIEW_ZOOM_MULTIPLIER
#defineEOG_CONF_VIEW_AUTOROTATE
#defineEOG_CONF_VIEW_TRANSPARENCY
#defineEOG_CONF_VIEW_TRANS_COLOR
#defineEOG_CONF_VIEW_BACKGROUND_COLOR
#defineEOG_CONF_VIEW_EXTRAPOLATE
#defineEOG_CONF_VIEW_USE_BG_COLOR
#defineEOG_CONF_FULLSCREEN_LOOP
#defineEOG_CONF_FULLSCREEN_UPSCALE
#defineEOG_CONF_FULLSCREEN_SECONDS
#defineEOG_CONF_UI_STATUSBAR
#defineEOG_CONF_UI_SIDEBAR
#defineEOG_CONF_UI_SCROLL_BUTTONS
#defineEOG_CONF_UI_DISABLE_CLOSE_CONFIRMATION
#defineEOG_CONF_UI_DISABLE_TRASH_CONFIRMATION
#defineEOG_CONF_UI_FILECHOOSER_XDG_FALLBACK
#defineEOG_CONF_UI_IMAGE_GALLERY
#defineEOG_CONF_UI_IMAGE_GALLERY_POSITION
#defineEOG_CONF_UI_IMAGE_GALLERY_RESIZABLE
#defineEOG_CONF_UI_PROPSDIALOG_NETBOOK_MODE
#defineEOG_CONF_UI
#defineEOG_CONF_PLUGINS_ACTIVE_PLUGINS
-
-
-

Description

-
-
-

Functions

-

-
-
-

Types and Values

-
-

EOG_CONF_DESKTOP_WALLPAPER

-
#define EOG_CONF_DESKTOP_WALLPAPER		"picture-uri"
-
-
-
-
-

EOG_CONF_DESKTOP_CAN_SAVE

-
#define EOG_CONF_DESKTOP_CAN_SAVE		"disable-save-to-disk"
-
-
-
-
-

EOG_CONF_DESKTOP_CAN_PRINT

-
#define EOG_CONF_DESKTOP_CAN_PRINT		"disable-printing"
-
-
-
-
-

EOG_CONF_DESKTOP_CAN_SETUP_PAGE

-
#define EOG_CONF_DESKTOP_CAN_SETUP_PAGE 	"disable-print-setup"
-
-
-
-
-

EOG_CONF_VIEW

-
#define EOG_CONF_VIEW				EOG_CONF_DOMAIN".view"
-
-
-
-
-

EOG_CONF_VIEW_INTERPOLATE

-
#define EOG_CONF_VIEW_INTERPOLATE		"interpolate"
-
-
-
-
-

EOG_CONF_VIEW_SCROLL_WHEEL_ZOOM

-
#define EOG_CONF_VIEW_SCROLL_WHEEL_ZOOM		"scroll-wheel-zoom"
-
-
-
-
-

EOG_CONF_VIEW_ZOOM_MULTIPLIER

-
#define EOG_CONF_VIEW_ZOOM_MULTIPLIER		"zoom-multiplier"
-
-
-
-
-

EOG_CONF_VIEW_AUTOROTATE

-
#define EOG_CONF_VIEW_AUTOROTATE                "autorotate"
-
-
-
-
-

EOG_CONF_VIEW_TRANSPARENCY

-
#define EOG_CONF_VIEW_TRANSPARENCY		"transparency"
-
-
-
-
-

EOG_CONF_VIEW_TRANS_COLOR

-
#define EOG_CONF_VIEW_TRANS_COLOR		"trans-color"
-
-
-
-
-

EOG_CONF_VIEW_BACKGROUND_COLOR

-
#define EOG_CONF_VIEW_BACKGROUND_COLOR		"background-color"
-
-
-
-
-

EOG_CONF_VIEW_EXTRAPOLATE

-
#define EOG_CONF_VIEW_EXTRAPOLATE		"extrapolate"
-
-
-
-
-

EOG_CONF_VIEW_USE_BG_COLOR

-
#define EOG_CONF_VIEW_USE_BG_COLOR		"use-background-color"
-
-
-
-
-

EOG_CONF_FULLSCREEN_LOOP

-
#define EOG_CONF_FULLSCREEN_LOOP		"loop"
-
-
-
-
-

EOG_CONF_FULLSCREEN_UPSCALE

-
#define EOG_CONF_FULLSCREEN_UPSCALE		"upscale"
-
-
-
-
-

EOG_CONF_FULLSCREEN_SECONDS

-
#define EOG_CONF_FULLSCREEN_SECONDS		"seconds"
-
-
-
-
-

EOG_CONF_UI_STATUSBAR

-
#define EOG_CONF_UI_STATUSBAR			"statusbar"
-
-
-
-
-

EOG_CONF_UI_SIDEBAR

-
#define EOG_CONF_UI_SIDEBAR			"sidebar"
-
-
-
-
-

EOG_CONF_UI_SCROLL_BUTTONS

-
#define EOG_CONF_UI_SCROLL_BUTTONS		"scroll-buttons"
-
-
-
-
-

EOG_CONF_UI_DISABLE_CLOSE_CONFIRMATION

-
#define EOG_CONF_UI_DISABLE_CLOSE_CONFIRMATION  "disable-close-confirmation"
-
-
-
-
-

EOG_CONF_UI_DISABLE_TRASH_CONFIRMATION

-
#define EOG_CONF_UI_DISABLE_TRASH_CONFIRMATION "disable-trash-confirmation"
-
-
-
-
-

EOG_CONF_UI_FILECHOOSER_XDG_FALLBACK

-
#define EOG_CONF_UI_FILECHOOSER_XDG_FALLBACK "filechooser-xdg-fallback"
-
-
-
-
-

EOG_CONF_UI_IMAGE_GALLERY

-
#define EOG_CONF_UI_IMAGE_GALLERY		"image-gallery"
-
-
-
-
-

EOG_CONF_UI_IMAGE_GALLERY_POSITION

-
#define EOG_CONF_UI_IMAGE_GALLERY_POSITION "image-gallery-position"
-
-
-
-
-

EOG_CONF_UI_IMAGE_GALLERY_RESIZABLE

-
#define EOG_CONF_UI_IMAGE_GALLERY_RESIZABLE "image-gallery-resizable"
-
-
-
-
-

EOG_CONF_UI_PROPSDIALOG_NETBOOK_MODE

-
#define EOG_CONF_UI_PROPSDIALOG_NETBOOK_MODE "propsdialog-netbook-mode"
-
-
-
-
-

EOG_CONF_UI

-
#define EOG_CONF_UI				EOG_CONF_DOMAIN".ui"
-
-
-
-
-

EOG_CONF_PLUGINS_ACTIVE_PLUGINS

-
#define EOG_CONF_PLUGINS_ACTIVE_PLUGINS         "active-plugins"
-
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-debug.html eog-3.27.90/doc/reference/html/eog-eog-debug.html --- eog-3.26.2/doc/reference/html/eog-eog-debug.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-debug.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,322 +0,0 @@ - - - - -eog-debug: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

eog-debug

-

eog-debug

-
-
-

Functions

-
---- - - - - - - - - - - - - - - -
-void - -eog_debug_init () -
-void - -eog_debug () -
-void - -eog_debug_message () -
-
-
-

Types and Values

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
enumEogDebug
#defineDEBUG_WINDOW
#defineDEBUG_VIEW
#defineDEBUG_JOBS
#defineDEBUG_THUMBNAIL
#defineDEBUG_IMAGE_DATA
#defineDEBUG_IMAGE_LOAD
#defineDEBUG_IMAGE_SAVE
#defineDEBUG_LIST_STORE
#defineDEBUG_PREFERENCES
#defineDEBUG_PRINTING
#defineDEBUG_LCMS
#defineDEBUG_PLUGINS
-
-
-

Description

-
-
-

Functions

-
-

eog_debug_init ()

-
void
-eog_debug_init (void);
-
-
-
-

eog_debug ()

-
void
-eog_debug (EogDebug section,
-           const gchar *file,
-           gint line,
-           const gchar *function);
-
-
-
-

eog_debug_message ()

-
void
-eog_debug_message (EogDebug section,
-                   const gchar *file,
-                   gint line,
-                   const gchar *function,
-                   const gchar *format,
-                   ...);
-
-
-
-

Types and Values

-
-

enum EogDebug

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

EOG_DEBUG_NO_DEBUG

  

EOG_DEBUG_WINDOW

  

EOG_DEBUG_VIEW

  

EOG_DEBUG_JOBS

  

EOG_DEBUG_THUMBNAIL

  

EOG_DEBUG_IMAGE_DATA

  

EOG_DEBUG_IMAGE_LOAD

  

EOG_DEBUG_IMAGE_SAVE

  

EOG_DEBUG_LIST_STORE

  

EOG_DEBUG_PREFERENCES

  

EOG_DEBUG_PRINTING

  

EOG_DEBUG_LCMS

  

EOG_DEBUG_PLUGINS

  
-
-
-
-
-

DEBUG_WINDOW

-
#define DEBUG_WINDOW		EOG_DEBUG_WINDOW,      __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_VIEW

-
#define DEBUG_VIEW		EOG_DEBUG_VIEW,        __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_JOBS

-
#define DEBUG_JOBS		EOG_DEBUG_JOBS,        __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_THUMBNAIL

-
#define DEBUG_THUMBNAIL		EOG_DEBUG_THUMBNAIL,   __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_IMAGE_DATA

-
#define DEBUG_IMAGE_DATA EOG_DEBUG_IMAGE_DATA,  __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_IMAGE_LOAD

-
#define DEBUG_IMAGE_LOAD EOG_DEBUG_IMAGE_LOAD,  __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_IMAGE_SAVE

-
#define DEBUG_IMAGE_SAVE EOG_DEBUG_IMAGE_SAVE,  __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_LIST_STORE

-
#define DEBUG_LIST_STORE EOG_DEBUG_LIST_STORE,  __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_PREFERENCES

-
#define DEBUG_PREFERENCES EOG_DEBUG_PREFERENCES, __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_PRINTING

-
#define DEBUG_PRINTING		EOG_DEBUG_PRINTING,    __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_LCMS

-
#define DEBUG_LCMS 		EOG_DEBUG_LCMS,        __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-

DEBUG_PLUGINS

-
#define DEBUG_PLUGINS 		EOG_DEBUG_PLUGINS,     __FILE__, __LINE__, G_STRFUNC
-
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-error-message-area.html eog-3.27.90/doc/reference/html/eog-eog-error-message-area.html --- eog-3.26.2/doc/reference/html/eog-eog-error-message-area.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-error-message-area.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - -eog-error-message-area: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

eog-error-message-area

-

eog-error-message-area

-
-
-

Functions

-
---- - - - - - - - - - - -
-GtkWidget * - -eog_image_load_error_message_area_new () -
-GtkWidget * - -eog_no_images_error_message_area_new () -
-
-
-

Description

-
-
-

Functions

-
-

eog_image_load_error_message_area_new ()

-
GtkWidget *
-eog_image_load_error_message_area_new (const gchar *caption,
-                                       const GError *error);
-
-
-
-

eog_no_images_error_message_area_new ()

-
GtkWidget *
-eog_no_images_error_message_area_new (GFile *file);
-
-
-
-

Types and Values

-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-exif-util.html eog-3.27.90/doc/reference/html/eog-eog-exif-util.html --- eog-3.26.2/doc/reference/html/eog-eog-exif-util.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-exif-util.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,181 +0,0 @@ - - - - -eog-exif-util: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

eog-exif-util

-

eog-exif-util

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - -
-gchar * - -eog_exif_util_format_date () -
-ExifData * - -eog_exif_data_copy () -
-void - -eog_exif_data_free () -
const gchar * - -eog_exif_data_get_value () -
-
-
-

Description

-
-
-

Functions

-
-

eog_exif_util_format_date ()

-
gchar *
-eog_exif_util_format_date (const gchar *date);
-

Takes a date string formatted after Exif specifications and generates a -more readable, possibly localized, string out of it.

-
-

Parameters

-
----- - - - - - -

date

a date string following Exif specifications

 
-
-
-

Returns

-

a newly allocated date string formatted according to the -current locale.

-
-
-
-
-

eog_exif_data_copy ()

-
ExifData *
-eog_exif_data_copy (ExifData *data);
-
-
-
-

eog_exif_data_free ()

-
void
-eog_exif_data_free (ExifData *data);
-
-
-
-

eog_exif_data_get_value ()

-
const gchar *
-eog_exif_data_get_value (ExifData *exif_data,
-                         gint tag_id,
-                         gchar *buffer,
-                         guint buf_size);
-

Convenience function to extract a string representation of an Exif tag -directly from an ExifData struct. The string is -written into buffer - as far as buf_size - permits.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - - - - - - -

exif_data

pointer to an ExifData struct

 

tag_id

the requested tag's id. See exif-tag.h -from the libexif package for possible values (e.g. EXIF_TAG_EXPOSURE_MODE).

 

buffer

a pre-allocated output buffer

 

buf_size

size of buffer -

 
-
-
-

Returns

-

a pointer to buffer -.

-
-
-
-
-

Types and Values

-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-image.html eog-3.27.90/doc/reference/html/eog-eog-image.html --- eog-3.26.2/doc/reference/html/eog-eog-image.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-image.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,1223 +0,0 @@ - - - - -EogImage: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogImage

-

EogImage

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-GQuark - -eog_image_error_quark () -
-EogImage * - -eog_image_new_file () -
-gboolean - -eog_image_load () -
-void - -eog_image_cancel_load () -
-gboolean - -eog_image_has_data () -
-void - -eog_image_data_ref () -
-void - -eog_image_data_unref () -
-void - -eog_image_set_thumbnail () -
-gboolean - -eog_image_save_as_by_info () -
-gboolean - -eog_image_save_by_info () -
-GdkPixbuf * - -eog_image_get_pixbuf () -
-GdkPixbuf * - -eog_image_get_thumbnail () -
-void - -eog_image_get_size () -
-goffset - -eog_image_get_bytes () -
-gboolean - -eog_image_is_modified () -
-void - -eog_image_modified () -
const gchar * - -eog_image_get_caption () -
const gchar * - -eog_image_get_collate_key () -
-ExifData * - -eog_image_get_exif_info () -
-gpointer - -eog_image_get_xmp_info () -
-GFile * - -eog_image_get_file () -
-gchar * - -eog_image_get_uri_for_display () -
-EogImageStatus - -eog_image_get_status () -
-void - -eog_image_transform () -
-void - -eog_image_autorotate () -
-cmsHPROFILE - -eog_image_get_profile () -
-void - -eog_image_apply_display_profile () -
-void - -eog_image_undo () -
-GList * - -eog_image_get_supported_mime_types () -
-gboolean - -eog_image_is_supported_mime_type () -
-void - -eog_image_file_changed () -
-gboolean - -eog_image_is_file_changed () -
-EogImageMetadataStatus - -eog_image_get_metadata_status () -
-RsvgHandle * - -eog_image_get_svg () -
-EogTransform * - -eog_image_get_transform () -
-gboolean - -eog_image_is_animation () -
-gboolean - -eog_image_is_svg () -
-gboolean - -eog_image_start_animation () -
-gboolean - -eog_image_is_file_writable () -
-gboolean - -eog_image_is_multipaged () -
-
-
-

Signals

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
voidchangedRun Last
voidfile-changedRun Last
voidnext-frameRun Last
voidsave-progressRun Last
voidsize-preparedRun Last
voidthumbnail-changedRun Last
-
-
-

Types and Values

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
enumEogImageData
#defineEOG_IMAGE_DATA_ALL
enumEogImageError
#defineEOG_IMAGE_ERROR
enumEogImageMetadataStatus
enumEogImageStatus
 EogImage
-
-
-

Object Hierarchy

-
    GObject
-    ╰── EogImage
-
-
-
-

Description

-
-
-

Functions

-
-

eog_image_error_quark ()

-
GQuark
-eog_image_error_quark (void);
-
-
-
-

eog_image_new_file ()

-
EogImage *
-eog_image_new_file (GFile *file,
-                    const gchar *caption);
-
-
-
-

eog_image_load ()

-
gboolean
-eog_image_load (EogImage *img,
-                EogImageData data2read,
-                EogJob *job,
-                GError **error);
-
-
-
-

eog_image_cancel_load ()

-
void
-eog_image_cancel_load (EogImage *img);
-
-
-
-

eog_image_has_data ()

-
gboolean
-eog_image_has_data (EogImage *img,
-                    EogImageData data);
-
-
-
-

eog_image_data_ref ()

-
void
-eog_image_data_ref (EogImage *img);
-
-
-
-

eog_image_data_unref ()

-
void
-eog_image_data_unref (EogImage *img);
-
-
-
-

eog_image_set_thumbnail ()

-
void
-eog_image_set_thumbnail (EogImage *img,
-                         GdkPixbuf *pixbuf);
-
-
-
-

eog_image_save_as_by_info ()

-
gboolean
-eog_image_save_as_by_info (EogImage *img,
-                           EogImageSaveInfo *source,
-                           EogImageSaveInfo *target,
-                           GError **error);
-
-
-
-

eog_image_save_by_info ()

-
gboolean
-eog_image_save_by_info (EogImage *img,
-                        EogImageSaveInfo *source,
-                        GError **error);
-
-
-
-

eog_image_get_pixbuf ()

-
GdkPixbuf *
-eog_image_get_pixbuf (EogImage *img);
-

Gets the GdkPixbuf of the image

-
-

Parameters

-
----- - - - - - -

img

a EogImage

 
-
-
-

Returns

-

a GdkPixbuf.

-

[transfer full]

-
-
-
-
-

eog_image_get_thumbnail ()

-
GdkPixbuf *
-eog_image_get_thumbnail (EogImage *img);
-

Gets the thumbnail pixbuf for img -

-
-

Parameters

-
----- - - - - - -

img

a EogImage

 
-
-
-

Returns

-

a GdkPixbuf with a thumbnail.

-

[transfer full]

-
-
-
-
-

eog_image_get_size ()

-
void
-eog_image_get_size (EogImage *img,
-                    gint *width,
-                    gint *height);
-
-
-
-

eog_image_get_bytes ()

-
goffset
-eog_image_get_bytes (EogImage *img);
-
-
-
-

eog_image_is_modified ()

-
gboolean
-eog_image_is_modified (EogImage *img);
-
-
-
-

eog_image_modified ()

-
void
-eog_image_modified (EogImage *img);
-
-
-
-

eog_image_get_caption ()

-
const gchar *
-eog_image_get_caption (EogImage *img);
-
-
-
-

eog_image_get_collate_key ()

-
const gchar *
-eog_image_get_collate_key (EogImage *img);
-
-
-
-

eog_image_get_exif_info ()

-
ExifData *
-eog_image_get_exif_info (EogImage *img);
-
-
-
-

eog_image_get_xmp_info ()

-
gpointer
-eog_image_get_xmp_info (EogImage *img);
-

Gets the XMP info for img - or NULL if compiled without -libexempi support.

-
-

Parameters

-
----- - - - - - -

img

a EogImage

 
-
-
-

Returns

-

the xmp data.

-

[transfer full]

-
-
-
-
-

eog_image_get_file ()

-
GFile *
-eog_image_get_file (EogImage *img);
-

Gets the GFile associated with img -

-
-

Parameters

-
----- - - - - - -

img

a EogImage

 
-
-
-

Returns

-

a GFile.

-

[transfer full]

-
-
-
-
-

eog_image_get_uri_for_display ()

-
gchar *
-eog_image_get_uri_for_display (EogImage *img);
-
-
-
-

eog_image_get_status ()

-
EogImageStatus
-eog_image_get_status (EogImage *img);
-
-
-
-

eog_image_transform ()

-
void
-eog_image_transform (EogImage *img,
-                     EogTransform *trans,
-                     EogJob *job);
-
-
-
-

eog_image_autorotate ()

-
void
-eog_image_autorotate (EogImage *img);
-
-
-
-

eog_image_get_profile ()

-
cmsHPROFILE
-eog_image_get_profile (EogImage *img);
-
-
-
-

eog_image_apply_display_profile ()

-
void
-eog_image_apply_display_profile (EogImage *img,
-                                 cmsHPROFILE display_profile);
-
-
-
-

eog_image_undo ()

-
void
-eog_image_undo (EogImage *img);
-
-
-
-

eog_image_get_supported_mime_types ()

-
GList *
-eog_image_get_supported_mime_types (void);
-

Gets the list of supported mimetypes

-
-

Returns

-

a GList of supported mimetypes.

-

[transfer none][element-type utf8]

-
-
-
-
-

eog_image_is_supported_mime_type ()

-
gboolean
-eog_image_is_supported_mime_type (const char *mime_type);
-
-
-
-

eog_image_file_changed ()

-
void
-eog_image_file_changed (EogImage *img);
-

Marks the image file contents as changed. Also, emits -EogImage::file-changed signal.

-
-

Parameters

-
----- - - - - - -

img

a EogImage

 
-
-
-
-
-

eog_image_is_file_changed ()

-
gboolean
-eog_image_is_file_changed (EogImage *img);
-
-
-
-

eog_image_get_metadata_status ()

-
EogImageMetadataStatus
-eog_image_get_metadata_status (EogImage *img);
-

Returns the current status of the image metadata, that is, -whether the metadata has not been read yet, is ready, or not available at all.

-
-

Parameters

-
----- - - - - - -

img

a EogImage

 
-
-
-

Returns

-

one of EogImageMetadataStatus

-
-
-
-
-

eog_image_get_svg ()

-
RsvgHandle *
-eog_image_get_svg (EogImage *img);
-
-
-
-

eog_image_get_transform ()

-
EogTransform *
-eog_image_get_transform (EogImage *img);
-

Get img - transform.

-
-

Parameters

-
----- - - - - - -

img

a EogImage

 
-
-
-

Returns

-

A EogTransform.

-

[transfer none]

-
-
-
-
-

eog_image_is_animation ()

-
gboolean
-eog_image_is_animation (EogImage *img);
-

Checks whether a given image is animated.

-
-

Parameters

-
----- - - - - - -

img

a EogImage

 
-
-
-

Returns

-

TRUE if it is an animated image, FALSE otherwise.

-
-
-
-
-

eog_image_is_svg ()

-
gboolean
-eog_image_is_svg (EogImage *img);
-
-
-
-

eog_image_start_animation ()

-
gboolean
-eog_image_start_animation (EogImage *img);
-

Starts playing an animated image.

-
-

Parameters

-
----- - - - - - -

img

a EogImage

 
-
-
-

Returns

-

TRUE on success, FALSE if img -is already playing or isn't an animated image.

-
-
-
-
-

eog_image_is_file_writable ()

-
gboolean
-eog_image_is_file_writable (EogImage *img);
-

Evaluate if the user has write permission on the image file.

-
-

Parameters

-
----- - - - - - -

img

a EogImage

 
-
-
-

Returns

-

TRUE on success, FALSE if the user hasn't write permissions on it, -or img -is not an EogImage.

-
-
-
-
-

eog_image_is_multipaged ()

-
gboolean
-eog_image_is_multipaged (EogImage *img);
-

Check whether the image actually contains multiple images/pages. -This can happen for TIFF files. GIF animations are not multipaged.

-

Note that this only works if the image data is loaded.

-
-

Parameters

-
----- - - - - - -

img

an EogImage

 
-
-
-

Returns

-

TRUE if img -is multipaged, FALSE if not or the image data wasn't loaded.

-
-

Since: 3.18

-
-
-
-

Types and Values

-
-

enum EogImageData

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - -

EOG_IMAGE_DATA_IMAGE

  

EOG_IMAGE_DATA_DIMENSION

  

EOG_IMAGE_DATA_EXIF

  

EOG_IMAGE_DATA_XMP

  
-
-
-
-
-

EOG_IMAGE_DATA_ALL

-
#define             EOG_IMAGE_DATA_ALL
-
-
-
-

enum EogImageError

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

EOG_IMAGE_ERROR_SAVE_NOT_LOCAL

  

EOG_IMAGE_ERROR_NOT_LOADED

  

EOG_IMAGE_ERROR_NOT_SAVED

  

EOG_IMAGE_ERROR_VFS

  

EOG_IMAGE_ERROR_FILE_EXISTS

  

EOG_IMAGE_ERROR_TMP_FILE_FAILED

  

EOG_IMAGE_ERROR_GENERIC

  

EOG_IMAGE_ERROR_UNKNOWN

  
-
-
-
-
-

EOG_IMAGE_ERROR

-
#define EOG_IMAGE_ERROR eog_image_error_quark ()
-
-
-
-
-

enum EogImageMetadataStatus

-
-

Members

-
----- - - - - - - - - - - - - - - - - - -

EOG_IMAGE_METADATA_NOT_READ

  

EOG_IMAGE_METADATA_NOT_AVAILABLE

  

EOG_IMAGE_METADATA_READY

  
-
-
-
-
-

enum EogImageStatus

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

EOG_IMAGE_STATUS_UNKNOWN

  

EOG_IMAGE_STATUS_LOADING

  

EOG_IMAGE_STATUS_LOADED

  

EOG_IMAGE_STATUS_SAVING

  

EOG_IMAGE_STATUS_FAILED

  
-
-
-
-
-

EogImage

-
typedef struct _EogImage EogImage;
-
-
-
-

Signal Details

-
-

The “changed” signal

-
void
-user_function (EogImage *eogimage,
-               gpointer  user_data)
-

Flags: Run Last

-
-
-
-

The “file-changed” signal

-
void
-user_function (EogImage *eogimage,
-               gpointer  user_data)
-

Flags: Run Last

-
-
-
-

The “next-frame” signal

-
void
-user_function (EogImage *img,
-               gint      delay,
-               gpointer  user_data)
-

The ::next-frame signal will be emitted each time an animated image -advances to the next frame.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - -

img

the object which received the signal.

 

delay

number of milliseconds the current frame will be displayed.

 

user_data

user data set when the signal handler was connected.

 
-
-

Flags: Run Last

-
-
-
-

The “save-progress” signal

-
void
-user_function (EogImage *eogimage,
-               gfloat    arg1,
-               gpointer  user_data)
-

Flags: Run Last

-
-
-
-

The “size-prepared” signal

-
void
-user_function (EogImage *eogimage,
-               gint      arg1,
-               gint      arg2,
-               gpointer  user_data)
-

Flags: Run Last

-
-
-
-

The “thumbnail-changed” signal

-
void
-user_function (EogImage *eogimage,
-               gpointer  user_data)
-

Flags: Run Last

-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-EogJobScheduler.html eog-3.27.90/doc/reference/html/eog-EogJobScheduler.html --- eog-3.26.2/doc/reference/html/eog-EogJobScheduler.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-EogJobScheduler.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,101 +0,0 @@ - - - - -EogJobScheduler: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogJobScheduler

-

EogJobScheduler

-
-
-

Functions

-
---- - - - - - - - - - - - - - - -
-void - -eog_job_scheduler_init () -
-void - -eog_job_scheduler_add_job () -
-void - -eog_job_scheduler_add_job_with_priority () -
-
-
-

Description

-
-
-

Functions

-
-

eog_job_scheduler_init ()

-
void
-eog_job_scheduler_init (void);
-
-
-
-

eog_job_scheduler_add_job ()

-
void
-eog_job_scheduler_add_job (EogJob *job);
-
-
-
-

eog_job_scheduler_add_job_with_priority ()

-
void
-eog_job_scheduler_add_job_with_priority
-                               (EogJob *job,
-                                EogJobPriority priority);
-
-
-
-

Types and Values

-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-jobs.html eog-3.27.90/doc/reference/html/eog-eog-jobs.html --- eog-3.26.2/doc/reference/html/eog-eog-jobs.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-jobs.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,872 +0,0 @@ - - - - -EogJob: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogJob

-

EogJob

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#define -EOG_JOB_THUMBNAIL() -
#define -EOG_JOB_THUMBNAIL_CLASS() -
#define -EOG_IS_JOB_THUMBNAIL() -
#define -EOG_JOB_LOAD() -
#define -EOG_JOB_LOAD_CLASS() -
#define -EOG_IS_JOB_LOAD() -
#define -EOG_JOB_MODEL() -
#define -EOG_JOB_MODEL_CLASS() -
#define -EOG_IS_JOB_MODEL() -
#define -EOG_JOB_TRANSFORM() -
#define -EOG_JOB_TRANSFORM_CLASS() -
#define -EOG_IS_JOB_TRANSFORM() -
#define -EOG_JOB_SAVE() -
#define -EOG_JOB_SAVE_CLASS() -
#define -EOG_IS_JOB_SAVE() -
#define -EOG_JOB_SAVE_GET_CLASS() -
#define -EOG_JOB_SAVE_AS() -
#define -EOG_JOB_SAVE_AS_CLASS() -
#define -EOG_IS_JOB_SAVE_AS() -
#define -EOG_JOB_COPY() -
#define -EOG_JOB_COPY_CLASS() -
-void - -eog_job_run () -
-void - -eog_job_set_progress () -
-GType - -eog_job_thumbnail_get_type () -
-EogJob * - -eog_job_thumbnail_new () -
-GType - -eog_job_load_get_type () -
-EogJob * - -eog_job_load_new () -
-GType - -eog_job_model_get_type () -
-EogJob * - -eog_job_model_new () -
-GType - -eog_job_transform_get_type () -
-EogJob * - -eog_job_transform_new () -
-GType - -eog_job_save_get_type () -
-EogJob * - -eog_job_save_new () -
-GType - -eog_job_save_as_get_type () -
-EogJob * - -eog_job_save_as_new () -
-GType - -eog_job_copy_get_type () -
-EogJob * - -eog_job_copy_new () -
-
-
-

Signals

-
----- - - - - - - - - - - - - - - - - - -
voidcancelledRun Last
voidfinishedRun Last
voidprogressRun Last
-
-
-

Types and Values

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#defineEOG_TYPE_JOB_THUMBNAIL
#defineEOG_TYPE_JOB_LOAD
#defineEOG_TYPE_JOB_MODEL
#defineEOG_TYPE_JOB_TRANSFORM
#defineEOG_TYPE_JOB_SAVE
#defineEOG_TYPE_JOB_SAVE_AS
 EogJob
structEogJobThumbnail
structEogJobLoad
structEogJobModel
structEogJobTransform
structEogJobSave
structEogJobSaveAs
structEogJobCopy
-
-
-

Object Hierarchy

-
    GObject
-    ╰── EogJob
-        ├── EogJobCopy
-        ├── EogJobLoad
-        ├── EogJobModel
-        ├── EogJobSave
-        │   ╰── EogJobSaveAs
-        ├── EogJobThumbnail
-        ╰── EogJobTransform
-
-
-
-

Description

-
-
-

Functions

-
-

EOG_JOB_THUMBNAIL()

-
#define EOG_JOB_THUMBNAIL(obj)            (G_TYPE_CHECK_INSTANCE_CAST ((obj), EOG_TYPE_JOB_THUMBNAIL, EogJobThumbnail))
-
-
-
-
-

EOG_JOB_THUMBNAIL_CLASS()

-
#define EOG_JOB_THUMBNAIL_CLASS(klass)    (G_TYPE_CHECK_CLASS_CAST ((klass),  EOG_TYPE_JOB_THUMBNAIL, EogJobThumbnailClass))
-
-
-
-
-

EOG_IS_JOB_THUMBNAIL()

-
#define EOG_IS_JOB_THUMBNAIL(obj)         (G_TYPE_CHECK_INSTANCE_TYPE ((obj), EOG_TYPE_JOB_THUMBNAIL))
-
-
-
-
-

EOG_JOB_LOAD()

-
#define EOG_JOB_LOAD(obj)                 (G_TYPE_CHECK_INSTANCE_CAST ((obj), EOG_TYPE_JOB_LOAD, EogJobLoad))
-
-
-
-
-

EOG_JOB_LOAD_CLASS()

-
#define EOG_JOB_LOAD_CLASS(klass)         (G_TYPE_CHECK_CLASS_CAST ((klass),  EOG_TYPE_JOB_LOAD, EogJobLoadClass))
-
-
-
-
-

EOG_IS_JOB_LOAD()

-
#define EOG_IS_JOB_LOAD(obj)              (G_TYPE_CHECK_INSTANCE_TYPE ((obj), EOG_TYPE_JOB_LOAD))
-
-
-
-
-

EOG_JOB_MODEL()

-
#define EOG_JOB_MODEL(obj)                (G_TYPE_CHECK_INSTANCE_CAST ((obj), EOG_TYPE_JOB_MODEL, EogJobModel))
-
-
-
-
-

EOG_JOB_MODEL_CLASS()

-
#define EOG_JOB_MODEL_CLASS(klass)        (G_TYPE_CHECK_CLASS_CAST ((klass),  EOG_TYPE_JOB_MODEL, EogJobModelClass))
-
-
-
-
-

EOG_IS_JOB_MODEL()

-
#define EOG_IS_JOB_MODEL(obj)             (G_TYPE_CHECK_INSTANCE_TYPE ((obj), EOG_TYPE_JOB_MODEL))
-
-
-
-
-

EOG_JOB_TRANSFORM()

-
#define EOG_JOB_TRANSFORM(obj)            (G_TYPE_CHECK_INSTANCE_CAST ((obj), EOG_TYPE_JOB_TRANSFORM, EogJobTransform))
-
-
-
-
-

EOG_JOB_TRANSFORM_CLASS()

-
#define EOG_JOB_TRANSFORM_CLASS(klass)    (G_TYPE_CHECK_CLASS_CAST ((klass),  EOG_TYPE_JOB_TRANSFORM, EogJobTransformClass))
-
-
-
-
-

EOG_IS_JOB_TRANSFORM()

-
#define EOG_IS_JOB_TRANSFORM(obj)         (G_TYPE_CHECK_INSTANCE_TYPE ((obj), EOG_TYPE_JOB_TRANSFORM))
-
-
-
-
-

EOG_JOB_SAVE()

-
#define EOG_JOB_SAVE(obj)                 (G_TYPE_CHECK_INSTANCE_CAST ((obj), EOG_TYPE_JOB_SAVE, EogJobSave))
-
-
-
-
-

EOG_JOB_SAVE_CLASS()

-
#define EOG_JOB_SAVE_CLASS(klass)         (G_TYPE_CHECK_CLASS_CAST ((klass),  EOG_TYPE_JOB_SAVE, EogJobSaveClass))
-
-
-
-
-

EOG_IS_JOB_SAVE()

-
#define EOG_IS_JOB_SAVE(obj)              (G_TYPE_CHECK_INSTANCE_TYPE ((obj), EOG_TYPE_JOB_SAVE))
-
-
-
-
-

EOG_JOB_SAVE_GET_CLASS()

-
#define EOG_JOB_SAVE_GET_CLASS(obj)       (G_TYPE_INSTANCE_GET_CLASS ((obj),  EOG_TYPE_JOB_SAVE, EogJobSaveClass))
-
-
-
-
-

EOG_JOB_SAVE_AS()

-
#define EOG_JOB_SAVE_AS(obj)              (G_TYPE_CHECK_INSTANCE_CAST ((obj), EOG_TYPE_JOB_SAVE_AS, EogJobSaveAs))
-
-
-
-
-

EOG_JOB_SAVE_AS_CLASS()

-
#define EOG_JOB_SAVE_AS_CLASS(klass)      (G_TYPE_CHECK_CLASS_CAST ((klass),  EOG_TYPE_JOB_SAVE_AS, EogJobSaveAsClass))
-
-
-
-
-

EOG_IS_JOB_SAVE_AS()

-
#define EOG_IS_JOB_SAVE_AS(obj)           (G_TYPE_CHECK_INSTANCE_TYPE ((obj), EOG_TYPE_JOB_SAVE_AS))
-
-
-
-
-

EOG_JOB_COPY()

-
#define EOG_JOB_COPY(obj)                 (G_TYPE_CHECK_INSTANCE_CAST ((obj), EOG_TYPE_JOB_COPY, EogJobCopy))
-
-
-
-
-

EOG_JOB_COPY_CLASS()

-
#define EOG_JOB_COPY_CLASS(klass)         (G_TYPE_CHECK_CLASS_CAST ((klass),  EOG_TYPE_JOB_COPY, EogJobCopyClass))
-
-
-
-
-

eog_job_run ()

-
void
-eog_job_run (EogJob *job);
-
-
-
-

eog_job_set_progress ()

-
void
-eog_job_set_progress (EogJob *job,
-                      gfloat progress);
-
-
-
-

eog_job_thumbnail_get_type ()

-
GType
-eog_job_thumbnail_get_type (void);
-
-
-
-

eog_job_thumbnail_new ()

-
EogJob *
-eog_job_thumbnail_new (EogImage *image);
-
-
-
-

eog_job_load_get_type ()

-
GType
-eog_job_load_get_type (void);
-
-
-
-

eog_job_load_new ()

-
EogJob *
-eog_job_load_new (EogImage *image,
-                  EogImageData data);
-
-
-
-

eog_job_model_get_type ()

-
GType
-eog_job_model_get_type (void);
-
-
-
-

eog_job_model_new ()

-
EogJob *
-eog_job_model_new (GSList *file_list);
-

Creates a new EogJob model.

-
-

Parameters

-
----- - - - - - -

file_list

a GFile list.

[element-type GFile]
-
-
-

Returns

-

A EogJob.

-
-
-
-
-

eog_job_transform_get_type ()

-
GType
-eog_job_transform_get_type (void);
-
-
-
-

eog_job_transform_new ()

-
EogJob *
-eog_job_transform_new (GList *images,
-                       EogTransform *transform);
-

Create a new EogJob for image transformation.

-
-

Parameters

-
----- - - - - - - - - - - - - -

images

a EogImage list.

[element-type EogImage][transfer full]

transform

a EogTransform

 
-
-
-

Returns

-

A EogJob.

-
-
-
-
-

eog_job_save_get_type ()

-
GType
-eog_job_save_get_type (void);
-
-
-
-

eog_job_save_new ()

-
EogJob *
-eog_job_save_new (GList *images);
-

Creates a new EogJob for image saving.

-
-

Parameters

-
----- - - - - - -

images

a EogImage list.

[element-type EogImage][transfer full]
-
-
-

Returns

-

A EogJob.

-
-
-
-
-

eog_job_save_as_get_type ()

-
GType
-eog_job_save_as_get_type (void);
-
-
-
-

eog_job_save_as_new ()

-
EogJob *
-eog_job_save_as_new (GList *images,
-                     EogURIConverter *converter,
-                     GFile *file);
-

Creates a new EogJog for save as.

-
-

Parameters

-
----- - - - - - - - - - - - - -

images

a EogImage list.

[element-type EogImage][transfer full]

converter

a URI converter -file: a GFile

 
-
-
-

Returns

-

A EogJob.

-
-
-
-
-

eog_job_copy_get_type ()

-
GType
-eog_job_copy_get_type (void);
-
-
-
-

eog_job_copy_new ()

-
EogJob *
-eog_job_copy_new (GList *images,
-                  const gchar *destination);
-

Creates a new EogJob.

-
-

Parameters

-
----- - - - - - - - - - - - - -

images

a EogImage list.

[element-type EogImage][transfer full]

destination

destination path for the copy

 
-
-
-

Returns

-

A EogJob.

-
-
-
-
-

Types and Values

-
-

EOG_TYPE_JOB_THUMBNAIL

-
#define EOG_TYPE_JOB_THUMBNAIL            (eog_job_thumbnail_get_type ())
-
-
-
-
-

EOG_TYPE_JOB_LOAD

-
#define EOG_TYPE_JOB_LOAD                 (eog_job_load_get_type ())
-
-
-
-
-

EOG_TYPE_JOB_MODEL

-
#define EOG_TYPE_JOB_MODEL                (eog_job_model_get_type ())
-
-
-
-
-

EOG_TYPE_JOB_TRANSFORM

-
#define EOG_TYPE_JOB_TRANSFORM            (eog_job_transform_get_type ())
-
-
-
-
-

EOG_TYPE_JOB_SAVE

-
#define EOG_TYPE_JOB_SAVE                 (eog_job_save_get_type ())
-
-
-
-
-

EOG_TYPE_JOB_SAVE_AS

-
#define EOG_TYPE_JOB_SAVE_AS              (eog_job_save_as_get_type ())
-
-
-
-
-

EogJob

-
typedef struct _EogJob EogJob;
-
-
-
-

struct EogJobThumbnail

-
struct EogJobThumbnail;
-
-
-
-

struct EogJobLoad

-
struct EogJobLoad;
-
-
-
-

struct EogJobModel

-
struct EogJobModel;
-
-
-
-

struct EogJobTransform

-
struct EogJobTransform;
-
-
-
-

struct EogJobSave

-
struct EogJobSave;
-
-
-
-

struct EogJobSaveAs

-
struct EogJobSaveAs;
-
-
-
-

struct EogJobCopy

-
struct EogJobCopy;
-
-
-
-

Signal Details

-
-

The “cancelled” signal

-
void
-user_function (EogJob  *eogjob,
-               gpointer user_data)
-

Flags: Run Last

-
-
-
-

The “finished” signal

-
void
-user_function (EogJob  *eogjob,
-               gpointer user_data)
-

Flags: Run Last

-
-
-
-

The “progress” signal

-
void
-user_function (EogJob  *eogjob,
-               gfloat   arg1,
-               gpointer user_data)
-

Flags: Run Last

-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-list-store.html eog-3.27.90/doc/reference/html/eog-eog-list-store.html --- eog-3.26.2/doc/reference/html/eog-eog-list-store.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-list-store.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,660 +0,0 @@ - - - - -EogListStore: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogListStore

-

EogListStore

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-GtkListStore * - -eog_list_store_new () -
-GtkListStore * - -eog_list_store_new_from_glist () -
-void - -eog_list_store_append_image () -
-void - -eog_list_store_add_files () -
-void - -eog_list_store_remove_image () -
-gint - -eog_list_store_get_pos_by_image () -
-EogImage * - -eog_list_store_get_image_by_pos () -
-gint - -eog_list_store_get_pos_by_iter () -
-gint - -eog_list_store_length () -
-gint - -eog_list_store_get_initial_pos () -
-void - -eog_list_store_thumbnail_set () -
-void - -eog_list_store_thumbnail_unset () -
-void - -eog_list_store_thumbnail_refresh () -
-
-
-

Types and Values

-
---- - - - - - - - - - - - - - - -
#defineEOG_LIST_STORE_THUMB_SIZE
enumEogListStoreColumn
structEogListStore
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GtkListStore
-        ╰── EogListStore
-
-
-
-

Implemented Interfaces

-

-EogListStore implements - GtkTreeModel, GtkTreeDragSource, GtkTreeDragDest, GtkTreeSortable and GtkBuildable.

-
-
-

Description

-
-
-

Functions

-
-

eog_list_store_new ()

-
GtkListStore *
-eog_list_store_new (void);
-

Creates a new and empty EogListStore.

-
-

Returns

-

a newly created EogListStore.

-
-
-
-
-

eog_list_store_new_from_glist ()

-
GtkListStore *
-eog_list_store_new_from_glist (GList *list);
-

Creates a new EogListStore from a list of EogImage's. -The given list must be NULL-terminated.

-
-

Parameters

-
----- - - - - - -

list

a NULL-terminated list of EogImage's.

[element-type EogImage]
-
-
-

Returns

-

a new EogListStore.

-
-
-
-
-

eog_list_store_append_image ()

-
void
-eog_list_store_append_image (EogListStore *store,
-                             EogImage *image);
-

Adds an EogImage to store -. The thumbnail of the image is not -loaded and will only be loaded if the thumbnail is made visible.

-
-

Parameters

-
----- - - - - - - - - - - - - -

store

An EogListStore.

 

image

An EogImage.

 
-
-
-
-
-

eog_list_store_add_files ()

-
void
-eog_list_store_add_files (EogListStore *store,
-                          GList *file_list);
-

Adds a list of GFile's to store -. The given list -must be NULL-terminated.

-

If any of the GFile's in file_list - is a directory, all the images -in that directory will be added to store -. If the list of files contains -only one file and this is a regular file, then all the images in the same -directory will be added as well to store -.

-
-

Parameters

-
----- - - - - - - - - - - - - -

store

An EogListStore.

 

file_list

A NULL-terminated list of GFile's.

[element-type GFile]
-
-
-
-
-

eog_list_store_remove_image ()

-
void
-eog_list_store_remove_image (EogListStore *store,
-                             EogImage *image);
-

Removes image - from store -.

-
-

Parameters

-
----- - - - - - - - - - - - - -

store

An EogListStore.

 

image

An EogImage.

 
-
-
-
-
-

eog_list_store_get_pos_by_image ()

-
gint
-eog_list_store_get_pos_by_image (EogListStore *store,
-                                 EogImage *image);
-

Gets the position where image - is stored in store -. If image - -is not stored in store -, -1 is returned.

-
-

Parameters

-
----- - - - - - - - - - - - - -

store

An EogListStore.

 

image

An EogImage.

 
-
-
-

Returns

-

the position of image -in store -or -1 if not found.

-
-
-
-
-

eog_list_store_get_image_by_pos ()

-
EogImage *
-eog_list_store_get_image_by_pos (EogListStore *store,
-                                 gint pos);
-

Gets the EogImage in the position pos - of store -. If there is -no image at position pos -, NULL is returned.

-
-

Parameters

-
----- - - - - - - - - - - - - -

store

An EogListStore.

 

pos

the position of the required EogImage.

 
-
-
-

Returns

-

the EogImage in position pos -or NULL.

-

[transfer full]

-
-
-
-
-

eog_list_store_get_pos_by_iter ()

-
gint
-eog_list_store_get_pos_by_iter (EogListStore *store,
-                                GtkTreeIter *iter);
-

Gets the position of the image pointed by iter -.

-
-

Parameters

-
----- - - - - - - - - - - - - -

store

An EogListStore.

 

iter

A GtkTreeIter pointing to an image in store -.

 
-
-
-

Returns

-

The position of the image pointed by iter -.

-
-
-
-
-

eog_list_store_length ()

-
gint
-eog_list_store_length (EogListStore *store);
-

Returns the number of images in the store.

-
-

Parameters

-
----- - - - - - -

store

An EogListStore.

 
-
-
-

Returns

-

The number of images in store -.

-
-
-
-
-

eog_list_store_get_initial_pos ()

-
gint
-eog_list_store_get_initial_pos (EogListStore *store);
-

Gets the position of the EogImage that should be loaded first. -If not set, it returns -1.

-
-

Parameters

-
----- - - - - - -

store

An EogListStore.

 
-
-
-

Returns

-

the position of the image to be loaded first or -1.

-
-
-
-
-

eog_list_store_thumbnail_set ()

-
void
-eog_list_store_thumbnail_set (EogListStore *store,
-                              GtkTreeIter *iter);
-

Sets the thumbnail for the image pointed by iter -.

-
-

Parameters

-
----- - - - - - - - - - - - - -

store

An EogListStore.

 

iter

A GtkTreeIter pointing to an image in store -.

 
-
-
-
-
-

eog_list_store_thumbnail_unset ()

-
void
-eog_list_store_thumbnail_unset (EogListStore *store,
-                                GtkTreeIter *iter);
-

Unsets the thumbnail for the image pointed by iter -, changing -it to a "busy" icon.

-
-

Parameters

-
----- - - - - - - - - - - - - -

store

An EogListStore.

 

iter

A GtkTreeIter pointing to an image in store -.

 
-
-
-
-
-

eog_list_store_thumbnail_refresh ()

-
void
-eog_list_store_thumbnail_refresh (EogListStore *store,
-                                  GtkTreeIter *iter);
-

Refreshes the thumbnail for the image pointed by iter -.

-
-

Parameters

-
----- - - - - - - - - - - - - -

store

An EogListStore.

 

iter

A GtkTreeIter pointing to an image in store -.

 
-
-
-
-
-

Types and Values

-
-

EOG_LIST_STORE_THUMB_SIZE

-
#define EOG_LIST_STORE_THUMB_SIZE 90
-
-
-
-
-

enum EogListStoreColumn

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

EOG_LIST_STORE_THUMBNAIL

  

EOG_LIST_STORE_THUMB_SET

  

EOG_LIST_STORE_EOG_IMAGE

  

EOG_LIST_STORE_EOG_JOB

  

EOG_LIST_STORE_NUM_COLUMNS

  
-
-
-
-
-

struct EogListStore

-
struct EogListStore;
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-pixbuf-util.html eog-3.27.90/doc/reference/html/eog-eog-pixbuf-util.html --- eog-3.26.2/doc/reference/html/eog-eog-pixbuf-util.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-pixbuf-util.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,113 +0,0 @@ - - - - -eog-pixbuf-util: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

eog-pixbuf-util

-

eog-pixbuf-util

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - -
-GSList * - -eog_pixbuf_get_savable_formats () -
-GdkPixbufFormat * - -eog_pixbuf_get_format_by_suffix () -
-GdkPixbufFormat * - -eog_pixbuf_get_format () -
-char * - -eog_pixbuf_get_common_suffix () -
-
-
-

Description

-
-
-

Functions

-
-

eog_pixbuf_get_savable_formats ()

-
GSList *
-eog_pixbuf_get_savable_formats (void);
-
-
-
-

eog_pixbuf_get_format_by_suffix ()

-
GdkPixbufFormat *
-eog_pixbuf_get_format_by_suffix (const char *suffix);
-
-
-
-

eog_pixbuf_get_format ()

-
GdkPixbufFormat *
-eog_pixbuf_get_format (GFile *file);
-
-
-
-

eog_pixbuf_get_common_suffix ()

-
char *
-eog_pixbuf_get_common_suffix (GdkPixbufFormat *format);
-
-
-
-

Types and Values

-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-print.html eog-3.27.90/doc/reference/html/eog-eog-print.html --- eog-3.26.2/doc/reference/html/eog-eog-print.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-print.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,129 +0,0 @@ - - - - -eog-print: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

eog-print

-

eog-print

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - -
-GtkPrintOperation * - -eog_print_operation_new () -
-GtkPageSetup * - -eog_print_get_page_setup () -
-void - -eog_print_set_page_setup () -
-GtkPrintSettings * - -eog_print_get_print_settings () -
-void - -eog_print_set_print_settings () -
-
-
-

Description

-
-
-

Functions

-
-

eog_print_operation_new ()

-
GtkPrintOperation *
-eog_print_operation_new (EogImage *image,
-                         GtkPrintSettings *print_settings,
-                         GtkPageSetup *page_setup);
-
-
-
-

eog_print_get_page_setup ()

-
GtkPageSetup *
-eog_print_get_page_setup (void);
-
-
-
-

eog_print_set_page_setup ()

-
void
-eog_print_set_page_setup (GtkPageSetup *page_setup);
-
-
-
-

eog_print_get_print_settings ()

-
GtkPrintSettings *
-eog_print_get_print_settings (void);
-
-
-
-

eog_print_set_print_settings ()

-
void
-eog_print_set_print_settings (GtkPrintSettings *print_settings);
-
-
-
-

Types and Values

-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-properties-dialog.html eog-3.27.90/doc/reference/html/eog-eog-properties-dialog.html --- eog-3.26.2/doc/reference/html/eog-eog-properties-dialog.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-properties-dialog.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,290 +0,0 @@ - - - - -EogPropertiesDialog: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogPropertiesDialog

-

EogPropertiesDialog

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - -
-GtkWidget * - -eog_properties_dialog_new () -
-void - -eog_properties_dialog_update () -
-void - -eog_properties_dialog_set_page () -
-void - -eog_properties_dialog_set_netbook_mode () -
-
-
-

Properties

-
----- - - - - - - - - - - - - - - - - - - - - - - -
gbooleannetbook-modeRead / Write
-gchar *next-actionRead / Write / Construct Only
-gchar *prev-actionRead / Write / Construct Only
-EogThumbView *thumbviewRead / Write / Construct Only
-
-
-

Types and Values

-
---- - - - - - - - - - - -
enumEogPropertiesDialogPage
structEogPropertiesDialog
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GInitiallyUnowned
-        ╰── GtkWidget
-            ╰── GtkContainer
-                ╰── GtkBin
-                    ╰── GtkWindow
-                        ╰── GtkDialog
-                            ╰── EogPropertiesDialog
-
-
-
-

Implemented Interfaces

-

-EogPropertiesDialog implements - AtkImplementorIface and GtkBuildable.

-
-
-

Description

-
-
-

Functions

-
-

eog_properties_dialog_new ()

-
GtkWidget *
-eog_properties_dialog_new (GtkWindow *parent,
-                           EogThumbView *thumbview,
-                           const gchar *next_image_action,
-                           const gchar *previous_image_action);
-

If parent implements GActionMap its actions will be automatically -inserted in the "win" namespace.

-
-

Parameters

-
----- - - - - - -

parent

the dialog's parent window

 
-
-
-

Returns

-

a new EogPropertiesDialog.

-

[transfer full][type EogPropertiesDialog]

-
-
-
-
-

eog_properties_dialog_update ()

-
void
-eog_properties_dialog_update (EogPropertiesDialog *prop,
-                              EogImage *image);
-
-
-
-

eog_properties_dialog_set_page ()

-
void
-eog_properties_dialog_set_page (EogPropertiesDialog *prop,
-                                EogPropertiesDialogPage page);
-
-
-
-

eog_properties_dialog_set_netbook_mode ()

-
void
-eog_properties_dialog_set_netbook_mode
-                               (EogPropertiesDialog *dlg,
-                                gboolean enable);
-
-
-
-

Types and Values

-
-

enum EogPropertiesDialogPage

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - -

EOG_PROPERTIES_DIALOG_PAGE_GENERAL

  

EOG_PROPERTIES_DIALOG_PAGE_EXIF

  

EOG_PROPERTIES_DIALOG_PAGE_DETAILS

  

EOG_PROPERTIES_DIALOG_N_PAGES

  
-
-
-
-
-

struct EogPropertiesDialog

-
struct EogPropertiesDialog;
-
-
-
-

Property Details

-
-

The “netbook-mode” property

-
  “netbook-mode”             gboolean
-

Netbook Mode.

-

Flags: Read / Write

-

Default value: FALSE

-
-
-
-

The “next-action” property

-
  “next-action”              gchar *
-

Action for Next button.

-

Flags: Read / Write / Construct Only

-

Default value: NULL

-
-
-
-

The “prev-action” property

-
  “prev-action”              gchar *
-

Action for Prev button.

-

Flags: Read / Write / Construct Only

-

Default value: NULL

-
-
-
-

The “thumbview” property

-
  “thumbview”                EogThumbView *
-

Thumbview.

-

Flags: Read / Write / Construct Only

-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-save-as-dialog-helper.html eog-3.27.90/doc/reference/html/eog-eog-save-as-dialog-helper.html --- eog-3.26.2/doc/reference/html/eog-eog-save-as-dialog-helper.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-save-as-dialog-helper.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,87 +0,0 @@ - - - - -eog-save-as-dialog-helper: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

eog-save-as-dialog-helper

-

eog-save-as-dialog-helper

-
-
-

Functions

-
---- - - - - - - - - - - -
-GtkWidget * - -eog_save_as_dialog_new () -
-EogURIConverter * - -eog_save_as_dialog_get_converter () -
-
-
-

Description

-
-
-

Functions

-
-

eog_save_as_dialog_new ()

-
GtkWidget *
-eog_save_as_dialog_new (GtkWindow *main,
-                        GList *images,
-                        GFile *base_file);
-
-
-
-

eog_save_as_dialog_get_converter ()

-
EogURIConverter *
-eog_save_as_dialog_get_converter (GtkWidget *dlg);
-
-
-
-

Types and Values

-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-session.html eog-3.27.90/doc/reference/html/eog-eog-session.html --- eog-3.26.2/doc/reference/html/eog-eog-session.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-session.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,99 +0,0 @@ - - - - -eog-session: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

eog-session

-

eog-session

-
-
-

Functions

-
---- - - - - - - - - - - - - - - -
-void - -eog_session_init () -
-gboolean - -eog_session_is_restored () -
-gboolean - -eog_session_load () -
-
-
-

Description

-
-
-

Functions

-
-

eog_session_init ()

-
void
-eog_session_init (EogApplication *application);
-
-
-
-

eog_session_is_restored ()

-
gboolean
-eog_session_is_restored (void);
-
-
-
-

eog_session_load ()

-
gboolean
-eog_session_load (void);
-
-
-
-

Types and Values

-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-thumbnail.html eog-3.27.90/doc/reference/html/eog-eog-thumbnail.html --- eog-3.26.2/doc/reference/html/eog-eog-thumbnail.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-thumbnail.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,230 +0,0 @@ - - - - -eog-thumbnail: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

eog-thumbnail

-

eog-thumbnail

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - -
-void - -eog_thumbnail_init () -
-GdkPixbuf * - -eog_thumbnail_fit_to_size () -
-GdkPixbuf * - -eog_thumbnail_add_frame () -
-GdkPixbuf * - -eog_thumbnail_load () -
-
-
-

Types and Values

-
---- - - - - - - - - - - -
#defineEOG_THUMBNAIL_ORIGINAL_WIDTH
#defineEOG_THUMBNAIL_ORIGINAL_HEIGHT
-
-
-

Description

-
-
-

Functions

-
-

eog_thumbnail_init ()

-
void
-eog_thumbnail_init (void);
-
-
-
-

eog_thumbnail_fit_to_size ()

-
GdkPixbuf *
-eog_thumbnail_fit_to_size (GdkPixbuf *thumbnail,
-                           gint dimension);
-

Ensures a pixbuf fits a given dimension -

-
-

Parameters

-
----- - - - - - - - - - - - - -

thumbnail

a GdkPixbuf

 

dimension

the maximum width or height desired

 
-
-
-

Returns

-

a new GdkPixbuf.

-

[transfer full]

-
-
-
-
-

eog_thumbnail_add_frame ()

-
GdkPixbuf *
-eog_thumbnail_add_frame (GdkPixbuf *thumbnail);
-

Adds a frame to thumbnail -

-
-

Parameters

-
----- - - - - - -

thumbnail

a GdkPixbuf

 
-
-
-

Returns

-

a new GdkPixbuf, storing thumbnail -nicely framed.

-

[transfer full]

-
-
-
-
-

eog_thumbnail_load ()

-
GdkPixbuf *
-eog_thumbnail_load (EogImage *image,
-                    GError **error);
-

Loads the thumbnail for image -. In case of error, NULL is returned -and error - is set.

-
-

Parameters

-
----- - - - - - - - - - - - - -

image

a EogImage

 

error

location to store the error ocurring or NULL to ignore

 
-
-
-

Returns

-

a new GdkPixbuf with the thumbnail for -image -or NULL in case of error.

-

[transfer full]

-
-
-
-
-

Types and Values

-
-

EOG_THUMBNAIL_ORIGINAL_WIDTH

-
#define EOG_THUMBNAIL_ORIGINAL_WIDTH  "eog-thumbnail-orig-width"
-
-
-
-
-

EOG_THUMBNAIL_ORIGINAL_HEIGHT

-
#define EOG_THUMBNAIL_ORIGINAL_HEIGHT "eog-thumbnail-orig-height"
-
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-thumb-nav.html eog-3.27.90/doc/reference/html/eog-eog-thumb-nav.html --- eog-3.26.2/doc/reference/html/eog-eog-thumb-nav.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-thumb-nav.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,385 +0,0 @@ - - - - -EogThumbNav: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogThumbNav

-

EogThumbNav

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - -
-GtkWidget * - -eog_thumb_nav_new () -
-gboolean - -eog_thumb_nav_get_show_buttons () -
-void - -eog_thumb_nav_set_show_buttons () -
-EogThumbNavMode - -eog_thumb_nav_get_mode () -
-void - -eog_thumb_nav_set_mode () -
-
-
-

Properties

-
----- - - - - - - - - - - - - - - - - - -
gintmodeRead / Write
gbooleanshow-buttonsRead / Write
-EogThumbView *thumbviewRead / Write / Construct Only
-
-
-

Types and Values

-
---- - - - - - - - - - - -
enumEogThumbNavMode
structEogThumbNav
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GInitiallyUnowned
-        ╰── GtkWidget
-            ╰── GtkContainer
-                ╰── GtkBox
-                    ╰── EogThumbNav
-
-
-
-

Implemented Interfaces

-

-EogThumbNav implements - AtkImplementorIface, GtkBuildable and GtkOrientable.

-
-
-

Description

-
-
-

Functions

-
-

eog_thumb_nav_new ()

-
GtkWidget *
-eog_thumb_nav_new (GtkWidget *thumbview,
-                   EogThumbNavMode mode,
-                   gboolean show_buttons);
-

Creates a new thumbnail navigation widget.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - -

thumbview

an EogThumbView to embed in the navigation widget.

 

mode

The navigation mode.

 

show_buttons

Whether to show the navigation buttons.

 
-
-
-

Returns

-

a new EogThumbNav object.

-
-
-
-
-

eog_thumb_nav_get_show_buttons ()

-
gboolean
-eog_thumb_nav_get_show_buttons (EogThumbNav *nav);
-

Gets whether the navigation buttons are visible.

-
-

Parameters

-
----- - - - - - -

nav

an EogThumbNav.

 
-
-
-

Returns

-

TRUE if the navigation buttons are visible, -FALSE otherwise.

-
-
-
-
-

eog_thumb_nav_set_show_buttons ()

-
void
-eog_thumb_nav_set_show_buttons (EogThumbNav *nav,
-                                gboolean show_buttons);
-

Sets whether the navigation buttons to the left and right of the -widget should be visible.

-
-

Parameters

-
----- - - - - - - - - - - - - -

nav

an EogThumbNav.

 

show_buttons

TRUE to show the buttons, FALSE to hide them.

 
-
-
-
-
-

eog_thumb_nav_get_mode ()

-
EogThumbNavMode
-eog_thumb_nav_get_mode (EogThumbNav *nav);
-

Gets the navigation mode in nav -.

-
-

Parameters

-
----- - - - - - -

nav

an EogThumbNav.

 
-
-
-

Returns

-

A value in EogThumbNavMode.

-
-
-
-
-

eog_thumb_nav_set_mode ()

-
void
-eog_thumb_nav_set_mode (EogThumbNav *nav,
-                        EogThumbNavMode mode);
-

Sets the navigation mode in nav -. See EogThumbNavMode for details.

-
-

Parameters

-
----- - - - - - - - - - - - - -

nav

An EogThumbNav.

 

mode

One of EogThumbNavMode.

 
-
-
-
-
-

Types and Values

-
-

enum EogThumbNavMode

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - -

EOG_THUMB_NAV_MODE_ONE_ROW

  

EOG_THUMB_NAV_MODE_ONE_COLUMN

  

EOG_THUMB_NAV_MODE_MULTIPLE_ROWS

  

EOG_THUMB_NAV_MODE_MULTIPLE_COLUMNS

  
-
-
-
-
-

struct EogThumbNav

-
struct EogThumbNav;
-
-
-
-

Property Details

-
-

The “mode” property

-
  “mode”                     gint
-

Thumb navigator mode.

-

Flags: Read / Write

-

Allowed values: [0,2]

-

Default value: 0

-
-
-
-

The “show-buttons” property

-
  “show-buttons”             gboolean
-

Whether to show navigation buttons or not.

-

Flags: Read / Write

-

Default value: TRUE

-
-
-
-

The “thumbview” property

-
  “thumbview”                EogThumbView *
-

The internal thumbnail viewer widget.

-

Flags: Read / Write / Construct Only

-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-thumb-view.html eog-3.27.90/doc/reference/html/eog-eog-thumb-view.html --- eog-3.26.2/doc/reference/html/eog-eog-thumb-view.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-thumb-view.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,484 +0,0 @@ - - - - -EogThumbView: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogThumbView

-

EogThumbView

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-GtkWidget * - -eog_thumb_view_new () -
-void - -eog_thumb_view_set_model () -
-void - -eog_thumb_view_set_item_height () -
-guint - -eog_thumb_view_get_n_selected () -
-EogImage * - -eog_thumb_view_get_first_selected_image () -
-GList * - -eog_thumb_view_get_selected_images () -
-void - -eog_thumb_view_select_single () -
-void - -eog_thumb_view_set_current_image () -
-void - -eog_thumb_view_set_thumbnail_popup () -
-
-
-

Types and Values

-
---- - - - - - - - - - - -
enumEogThumbViewSelectionChange
structEogThumbView
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GInitiallyUnowned
-        ╰── GtkWidget
-            ╰── GtkContainer
-                ╰── GtkIconView
-                    ╰── EogThumbView
-
-
-
-

Implemented Interfaces

-

-EogThumbView implements - AtkImplementorIface, GtkBuildable, GtkCellLayout, GtkScrollable and GtkOrientable.

-
-
-

Description

-
-
-

Functions

-
-

eog_thumb_view_new ()

-
GtkWidget *
-eog_thumb_view_new (void);
-

Creates a new EogThumbView object.

-
-

Returns

-

a newly created EogThumbView.

-
-
-
-
-

eog_thumb_view_set_model ()

-
void
-eog_thumb_view_set_model (EogThumbView *thumbview,
-                          EogListStore *store);
-

Sets the EogListStore to be used with thumbview -. If an initial image -was set during store - creation, its thumbnail will be selected and visible.

-
-

Parameters

-
----- - - - - - - - - - - - - -

thumbview

A EogThumbView.

 

store

A EogListStore.

 
-
-
-
-
-

eog_thumb_view_set_item_height ()

-
void
-eog_thumb_view_set_item_height (EogThumbView *thumbview,
-                                gint height);
-

Sets the height of each thumbnail in thumbview -.

-
-

Parameters

-
----- - - - - - - - - - - - - -

thumbview

A EogThumbView.

 

height

The desired height.

 
-
-
-
-
-

eog_thumb_view_get_n_selected ()

-
guint
-eog_thumb_view_get_n_selected (EogThumbView *thumbview);
-

Gets the number of images that are currently selected in thumbview -.

-
-

Parameters

-
----- - - - - - -

thumbview

An EogThumbView.

 
-
-
-

Returns

-

the number of selected images in thumbview -.

-
-
-
-
-

eog_thumb_view_get_first_selected_image ()

-
EogImage *
-eog_thumb_view_get_first_selected_image
-                               (EogThumbView *thumbview);
-

Returns the first selected image. Note that the returned EogImage -is not ensured to be really the first selected image in thumbview -, but -generally, it will be.

-
-

Parameters

-
----- - - - - - -

thumbview

A EogThumbView.

 
-
-
-

Returns

-

A EogImage.

-

[transfer full]

-
-
-
-
-

eog_thumb_view_get_selected_images ()

-
GList *
-eog_thumb_view_get_selected_images (EogThumbView *thumbview);
-

Gets a list with the currently selected images. Note that a new reference is -hold for each image and the list must be freed with g_list_free().

-
-

Parameters

-
----- - - - - - -

thumbview

A EogThumbView.

 
-
-
-

Returns

-

A newly allocated list of EogImage's.

-

[element-type EogImage][transfer full]

-
-
-
-
-

eog_thumb_view_select_single ()

-
void
-eog_thumb_view_select_single (EogThumbView *thumbview,
-                              EogThumbViewSelectionChange change);
-

Changes the current selection according to a single movement -described by EogThumbViewSelectionChange. If there are no -thumbnails currently selected, one is selected according to the -natural selection according to the EogThumbViewSelectionChange -used, p.g., when EOG_THUMB_VIEW_SELECT_RIGHT is the selected change, -the first thumbnail will be selected.

-
-

Parameters

-
----- - - - - - - - - - - - - -

thumbview

A EogThumbView.

 

change

A EogThumbViewSelectionChange, describing the -desired selection change.

 
-
-
-
-
-

eog_thumb_view_set_current_image ()

-
void
-eog_thumb_view_set_current_image (EogThumbView *thumbview,
-                                  EogImage *image,
-                                  gboolean deselect_other);
-

Changes the status of a image, marking it as currently selected. -If deselect_other - is TRUE, all other selected images will be -deselected.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - -

thumbview

A EogThumbView.

 

image

The image to be selected.

 

deselect_other

Whether to deselect currently selected images.

 
-
-
-
-
-

eog_thumb_view_set_thumbnail_popup ()

-
void
-eog_thumb_view_set_thumbnail_popup (EogThumbView *thumbview,
-                                    GtkMenu *menu);
-

Set the contextual menu to be used with the thumbnails in the -widget. This can be done only once.

-
-

Parameters

-
----- - - - - - - - - - - - - -

thumbview

An EogThumbView.

 

menu

A GtkMenu.

 
-
-
-
-
-

Types and Values

-
-

enum EogThumbViewSelectionChange

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

EOG_THUMB_VIEW_SELECT_CURRENT

  

EOG_THUMB_VIEW_SELECT_LEFT

  

EOG_THUMB_VIEW_SELECT_RIGHT

  

EOG_THUMB_VIEW_SELECT_FIRST

  

EOG_THUMB_VIEW_SELECT_LAST

  

EOG_THUMB_VIEW_SELECT_RANDOM

  
-
-
-
-
-

struct EogThumbView

-
struct EogThumbView;
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-transform.html eog-3.27.90/doc/reference/html/eog-eog-transform.html --- eog-3.26.2/doc/reference/html/eog-eog-transform.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-transform.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,387 +0,0 @@ - - - - -EogTransform: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogTransform

-

EogTransform

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-GdkPixbuf * - -eog_transform_apply () -
-EogTransform * - -eog_transform_reverse () -
-EogTransform * - -eog_transform_compose () -
-gboolean - -eog_transform_get_affine () -
-gboolean - -eog_transform_is_identity () -
-EogTransform * - -eog_transform_identity_new () -
-EogTransform * - -eog_transform_rotate_new () -
-EogTransform * - -eog_transform_flip_new () -
-EogTransform * - -eog_transform_scale_new () -
-EogTransform * - -eog_transform_new () -
-EogTransformType - -eog_transform_get_transform_type () -
-
-
-

Types and Values

-
---- - - - - - - - - - - -
enumEogTransformType
structEogTransform
-
-
-

Object Hierarchy

-
    GObject
-    ╰── EogTransform
-
-
-
-

Description

-
-
-

Functions

-
-

eog_transform_apply ()

-
GdkPixbuf *
-eog_transform_apply (EogTransform *trans,
-                     GdkPixbuf *pixbuf,
-                     EogJob *job);
-

Applies the transformation in trans - to pixbuf -, setting its progress in job -.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - -

trans

a EogTransform

 

pixbuf

a GdkPixbuf

 

job

a EogJob

 
-
-
-

Returns

-

A new GdkPixbuf with the transformation applied.

-

[transfer full]

-
-
-
-
-

eog_transform_reverse ()

-
EogTransform *
-eog_transform_reverse (EogTransform *trans);
-

Creates the reverse transformation of trans -

-
-

Parameters

-
----- - - - - - -

trans

a EogTransform

 
-
-
-

Returns

-

a new transformation.

-

[transfer full]

-
-
-
-
-

eog_transform_compose ()

-
EogTransform *
-eog_transform_compose (EogTransform *trans,
-                       EogTransform *compose);
-
-

Parameters

-
----- - - - - - - - - - - - - -

trans

a EogTransform

 

compose

another EogTransform

 
-
-
-

Returns

-

a new transform.

-

[transfer full]

-
-
-
-
-

eog_transform_get_affine ()

-
gboolean
-eog_transform_get_affine (EogTransform *trans,
-                          cairo_matrix_t *affine);
-
-
-
-

eog_transform_is_identity ()

-
gboolean
-eog_transform_is_identity (EogTransform *trans);
-
-
-
-

eog_transform_identity_new ()

-
EogTransform *
-eog_transform_identity_new (void);
-
-
-
-

eog_transform_rotate_new ()

-
EogTransform *
-eog_transform_rotate_new (int degree);
-
-
-
-

eog_transform_flip_new ()

-
EogTransform *
-eog_transform_flip_new (EogTransformType type);
-
-
-
-

eog_transform_scale_new ()

-
EogTransform *
-eog_transform_scale_new (double sx,
-                         double sy);
-
-
-
-

eog_transform_new ()

-
EogTransform *
-eog_transform_new (EogTransformType trans);
-
-
-
-

eog_transform_get_transform_type ()

-
EogTransformType
-eog_transform_get_transform_type (EogTransform *trans);
-
-
-
-

Types and Values

-
-

enum EogTransformType

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

EOG_TRANSFORM_NONE

  

EOG_TRANSFORM_ROT_90

  

EOG_TRANSFORM_ROT_180

  

EOG_TRANSFORM_ROT_270

  

EOG_TRANSFORM_FLIP_HORIZONTAL

  

EOG_TRANSFORM_FLIP_VERTICAL

  

EOG_TRANSFORM_TRANSPOSE

  

EOG_TRANSFORM_TRANSVERSE

  
-
-
-
-
-

struct EogTransform

-
struct EogTransform;
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-uri-converter.html eog-3.27.90/doc/reference/html/eog-eog-uri-converter.html --- eog-3.26.2/doc/reference/html/eog-eog-uri-converter.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-uri-converter.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,448 +0,0 @@ - - - - -EogURIConverter: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogURIConverter

-

EogURIConverter

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-GQuark - -eog_uc_error_quark () -
-EogURIConverter * - -eog_uri_converter_new () -
-gboolean - -eog_uri_converter_check () -
-gboolean - -eog_uri_converter_requires_exif () -
-gboolean - -eog_uri_converter_do () -
-char * - -eog_uri_converter_preview () -
-void - -eog_uri_converter_print_list () -
-
-
-

Properties

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
gbooleanconvert-spacesRead / Write
guintcounter-n-digitsRead / Write
gulongcounter-startRead / Write
guintn-imagesWrite
gcharspace-characterRead / Write
-
-
-

Types and Values

-
---- - - - - - - - - - - - - - - - - - - - - - - -
enumEogUCType
 EogUCInfo
enumEogUCError
#defineEOG_UC_ERROR
 EogURIConverter
-
-
-

Object Hierarchy

-
    GObject
-    ╰── EogURIConverter
-
-
-
-

Description

-
-
-

Functions

-
-

eog_uc_error_quark ()

-
GQuark
-eog_uc_error_quark (void);
-
-
-
-

eog_uri_converter_new ()

-
EogURIConverter *
-eog_uri_converter_new (GFile *base_file,
-                       GdkPixbufFormat *img_format,
-                       const char *format_string);
-
-
-
-

eog_uri_converter_check ()

-
gboolean
-eog_uri_converter_check (EogURIConverter *converter,
-                         GList *img_list,
-                         GError **error);
-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - -

converter

a EogURIConverter

 

img_list

a Gfile list.

[element-type GFile]

error

a GError location to store the error occurring, or NULL to ignore

 
-
-
-
-
-

eog_uri_converter_requires_exif ()

-
gboolean
-eog_uri_converter_requires_exif (EogURIConverter *converter);
-
-
-
-

eog_uri_converter_do ()

-
gboolean
-eog_uri_converter_do (EogURIConverter *converter,
-                      EogImage *image,
-                      GFile **file,
-                      GdkPixbufFormat **format,
-                      GError **error);
-
-
-
-

eog_uri_converter_preview ()

-
char *
-eog_uri_converter_preview (const char *format_str,
-                           EogImage *img,
-                           GdkPixbufFormat *format,
-                           gulong counter,
-                           guint n_images,
-                           gboolean convert_spaces,
-                           gunichar space_char);
-
-
-
-

eog_uri_converter_print_list ()

-
void
-eog_uri_converter_print_list (EogURIConverter *conv);
-
-
-
-

Types and Values

-
-

enum EogUCType

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

EOG_UC_STRING

  

EOG_UC_FILENAME

  

EOG_UC_COUNTER

  

EOG_UC_COMMENT

  

EOG_UC_DATE

  

EOG_UC_TIME

  

EOG_UC_DAY

  

EOG_UC_MONTH

  

EOG_UC_YEAR

  

EOG_UC_HOUR

  

EOG_UC_MINUTE

  

EOG_UC_SECOND

  

EOG_UC_END

  
-
-
-
-
-

EogUCInfo

-
typedef struct {
-	char     *description;
-	char     *rep;
-	gboolean req_exif;
-} EogUCInfo;
-
-
-
-
-

enum EogUCError

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - -

EOG_UC_ERROR_INVALID_UNICODE

  

EOG_UC_ERROR_INVALID_CHARACTER

  

EOG_UC_ERROR_EQUAL_FILENAMES

  

EOG_UC_ERROR_UNKNOWN

  
-
-
-
-
-

EOG_UC_ERROR

-
#define EOG_UC_ERROR eog_uc_error_quark ()
-
-
-
-
-

EogURIConverter

-
typedef struct _EogURIConverter EogURIConverter;
-
-
-
-

Property Details

-
-

The “convert-spaces” property

-
  “convert-spaces”           gboolean
-

Flags: Read / Write

-

Default value: FALSE

-
-
-
-

The “counter-n-digits” property

-
  “counter-n-digits”         guint
-

Flags: Read / Write

-

Allowed values: >= 1

-

Default value: 1

-
-
-
-

The “counter-start” property

-
  “counter-start”            gulong
-

Flags: Read / Write

-
-
-
-

The “n-images” property

-
  “n-images”                 guint
-

Flags: Write

-

Allowed values: >= 1

-

Default value: 1

-
-
-
-

The “space-character” property

-
  “space-character”          gchar
-

Flags: Read / Write

-

Allowed values: [32,126]

-

Default value: 95

-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-util.html eog-3.27.90/doc/reference/html/eog-eog-util.html --- eog-3.26.2/doc/reference/html/eog-eog-util.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-util.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,259 +0,0 @@ - - - - -eog-util: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

eog-util

-

eog-util

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-void - -eog_util_show_help () -
-gchar * - -eog_util_make_valid_utf8 () -
-GSList * - -eog_util_parse_uri_string_list_to_file_list () -
-GSList * - -eog_util_string_list_to_file_list () -
-GSList * - -eog_util_strings_to_file_list () -
-GSList * - -eog_util_string_array_to_list () -
-gchar ** - -eog_util_string_array_make_absolute () -
-gboolean - -eog_util_launch_desktop_file () -
const gchar * - -eog_util_dot_dir () -
-gboolean - -eog_util_file_is_persistent () -
-char * - -eog_util_filename_get_extension () -
-
-
-

Description

-
-
-

Functions

-
-

eog_util_show_help ()

-
void
-eog_util_show_help (const gchar *section,
-                    GtkWindow *parent);
-
-
-
-

eog_util_make_valid_utf8 ()

-
gchar *
-eog_util_make_valid_utf8 (const gchar *name);
-
-
-
-

eog_util_parse_uri_string_list_to_file_list ()

-
GSList *
-eog_util_parse_uri_string_list_to_file_list
-                               (const gchar *uri_list);
-
-
-
-

eog_util_string_list_to_file_list ()

-
GSList *
-eog_util_string_list_to_file_list (GSList *string_list);
-
-
-
-

eog_util_strings_to_file_list ()

-
GSList *
-eog_util_strings_to_file_list (gchar **strings);
-
-
-
-

eog_util_string_array_to_list ()

-
GSList *
-eog_util_string_array_to_list (const gchar **files,
-                               gboolean create_uri);
-
-
-
-

eog_util_string_array_make_absolute ()

-
gchar **
-eog_util_string_array_make_absolute (gchar **files);
-
-
-
-

eog_util_launch_desktop_file ()

-
gboolean
-eog_util_launch_desktop_file (const gchar *filename,
-                              guint32 user_time);
-
-
-
-

eog_util_dot_dir ()

-
const    gchar *
-eog_util_dot_dir (void);
-
-
-
-

eog_util_file_is_persistent ()

-
gboolean
-eog_util_file_is_persistent (GFile *file);
-

Checks whether file - is a non-removable local mount.

-
-

Parameters

-
----- - - - - - -

file

a GFile

 
-
-
-

Returns

-

TRUE if file -is in a non-removable mount, -FALSE otherwise or when it is remote.

-
-
-
-
-

eog_util_filename_get_extension ()

-
char *
-eog_util_filename_get_extension (const char *filename);
-

Returns a reasonably good guess of the file extension of filename -.

-
-

Parameters

-
----- - - - - - -

filename

a filename

 
-
-
-

Returns

-

a newly allocated string with the file extension of filename -.

-
-
-
-
-

Types and Values

-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-eog-window.html eog-3.27.90/doc/reference/html/eog-eog-window.html --- eog-3.26.2/doc/reference/html/eog-eog-window.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-eog-window.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,886 +0,0 @@ - - - - -EogWindow: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogWindow

-

EogWindow

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-GtkWidget * - -eog_window_new () -
-GMenu * - -eog_window_get_gear_menu_section () -
-EogWindowMode - -eog_window_get_mode () -
-void - -eog_window_set_mode () -
-EogListStore * - -eog_window_get_store () -
-GtkWidget * - -eog_window_get_view () -
-GtkWidget * - -eog_window_get_sidebar () -
-GtkWidget * - -eog_window_get_thumb_view () -
-GtkWidget * - -eog_window_get_thumb_nav () -
-GtkWidget * - -eog_window_get_statusbar () -
-EogImage * - -eog_window_get_image () -
-void - -eog_window_open_file_list () -
-gboolean - -eog_window_is_empty () -
-void - -eog_window_reload_image () -
-
-
-

Properties

-
----- - - - - - - - - - - - - - - - - - -
EogWindowGalleryPosgallery-positionRead / Write
gbooleangallery-resizableRead / Write
EogStartupFlagsstartup-flagsRead / Write / Construct Only
-
-
-

Signals

-
----- - - - - - -
voidpreparedRun Last
-
-
-

Types and Values

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - -
#defineEOG_WINDOW_ERROR
enumEogWindowGalleryPos
enumEogWindowMode
enumEogWindowError
enumEogStartupFlags
structEogWindow
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GInitiallyUnowned
-        ╰── GtkWidget
-            ╰── GtkContainer
-                ╰── GtkBin
-                    ╰── GtkWindow
-                        ╰── GtkApplicationWindow
-                            ╰── EogWindow
-
-
-
-

Implemented Interfaces

-

-EogWindow implements - AtkImplementorIface, GtkBuildable, GActionGroup and GActionMap.

-
-
-

Description

-
-
-

Functions

-
-

eog_window_new ()

-
GtkWidget *
-eog_window_new (EogStartupFlags flags);
-

Creates a new and empty EogWindow. Use flags - to indicate -if the window should be initialized fullscreen, in slideshow mode, -and/or without the thumbnails gallery visible. See EogStartupFlags.

-
-

Parameters

-
----- - - - - - -

flags

the initialization parameters for the new window.

 
-
-
-

Returns

-

a newly created EogWindow.

-
-
-
-
-

eog_window_get_gear_menu_section ()

-
GMenu *
-eog_window_get_gear_menu_section (EogWindow *window,
-                                  const gchar *id);
-
-

Parameters

-
----- - - - - - - - - - - - - -

window

an EogWindow.

 

id

the ID for the menu section to look up

 
-
-
-

Returns

-

a GMenu or NULL on failure.

-

[transfer none]

-
-
-
-
-

eog_window_get_mode ()

-
EogWindowMode
-eog_window_get_mode (EogWindow *window);
-

Gets the mode of window -. See EogWindowMode for details.

-
-

Parameters

-
----- - - - - - -

window

An EogWindow.

 
-
-
-

Returns

-

An EogWindowMode.

-
-
-
-
-

eog_window_set_mode ()

-
void
-eog_window_set_mode (EogWindow *window,
-                     EogWindowMode mode);
-

Changes the mode of window - to normal, fullscreen, or slideshow. -See EogWindowMode for details.

-
-

Parameters

-
----- - - - - - - - - - - - - -

window

an EogWindow.

 

mode

an EogWindowMode value.

 
-
-
-
-
-

eog_window_get_store ()

-
EogListStore *
-eog_window_get_store (EogWindow *window);
-

Gets the EogListStore that contains the images in the gallery -of window -.

-
-

Parameters

-
----- - - - - - -

window

An EogWindow.

 
-
-
-

Returns

-

an EogListStore.

-

[transfer none]

-
-
-
-
-

eog_window_get_view ()

-
GtkWidget *
-eog_window_get_view (EogWindow *window);
-

Gets the EogScrollView in the window.

-
-

Parameters

-
----- - - - - - -

window

An EogWindow.

 
-
-
-

Returns

-

the EogScrollView.

-

[transfer none]

-
-
-
-
-

eog_window_get_sidebar ()

-
GtkWidget *
-eog_window_get_sidebar (EogWindow *window);
-

Gets the sidebar widget of window -.

-
-

Parameters

-
----- - - - - - -

window

An EogWindow.

 
-
-
-

Returns

-

the EogSidebar.

-

[transfer none]

-
-
-
-
-

eog_window_get_thumb_view ()

-
GtkWidget *
-eog_window_get_thumb_view (EogWindow *window);
-

Gets the thumbnails view in window -.

-
-

Parameters

-
----- - - - - - -

window

an EogWindow.

 
-
-
-

Returns

-

an EogThumbView.

-

[transfer none]

-
-
-
-
-

eog_window_get_thumb_nav ()

-
GtkWidget *
-eog_window_get_thumb_nav (EogWindow *window);
-

Gets the thumbnails navigation pane in window -.

-
-

Parameters

-
----- - - - - - -

window

an EogWindow.

 
-
-
-

Returns

-

an EogThumbNav.

-

[transfer none]

-
-
-
-
-

eog_window_get_statusbar ()

-
GtkWidget *
-eog_window_get_statusbar (EogWindow *window);
-

Gets the statusbar in window -.

-
-

Parameters

-
----- - - - - - -

window

an EogWindow.

 
-
-
-

Returns

-

a EogStatusbar.

-

[transfer none]

-
-
-
-
-

eog_window_get_image ()

-
EogImage *
-eog_window_get_image (EogWindow *window);
-

Gets the image currently displayed in window - or NULL if -no image is being displayed.

-
-

Parameters

-
----- - - - - - -

window

an EogWindow.

 
-
-
-

Returns

-

an EogImage.

-

[transfer none]

-
-
-
-
-

eog_window_open_file_list ()

-
void
-eog_window_open_file_list (EogWindow *window,
-                           GSList *file_list);
-

Opens a list of files, adding them to the gallery in window -. -Files will be checked to be readable and later filtered according -with eog_list_store_add_files().

-
-

Parameters

-
----- - - - - - - - - - - - - -

window

An EogWindow.

 

file_list

A NULL-terminated list of GFile's.

[element-type GFile]
-
-
-
-
-

eog_window_is_empty ()

-
gboolean
-eog_window_is_empty (EogWindow *window);
-

Tells whether window - is currently empty or not.

-
-

Parameters

-
----- - - - - - -

window

an EogWindow.

 
-
-
-

Returns

-

TRUE if window -has no images, FALSE otherwise.

-
-
-
-
-

eog_window_reload_image ()

-
void
-eog_window_reload_image (EogWindow *window);
-
-
-
-

Types and Values

-
-

EOG_WINDOW_ERROR

-
#define EOG_WINDOW_ERROR           (eog_window_error_quark ())
-
-
-
-
-

enum EogWindowGalleryPos

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - -

EOG_WINDOW_GALLERY_POS_BOTTOM

  

EOG_WINDOW_GALLERY_POS_LEFT

  

EOG_WINDOW_GALLERY_POS_TOP

  

EOG_WINDOW_GALLERY_POS_RIGHT

  
-
-
-
-
-

enum EogWindowMode

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - -

EOG_WINDOW_MODE_UNKNOWN

  

EOG_WINDOW_MODE_NORMAL

  

EOG_WINDOW_MODE_FULLSCREEN

  

EOG_WINDOW_MODE_SLIDESHOW

  
-
-
-
-
-

enum EogWindowError

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

EOG_WINDOW_ERROR_CONTROL_NOT_FOUND

  

EOG_WINDOW_ERROR_UI_NOT_FOUND

  

EOG_WINDOW_ERROR_NO_PERSIST_FILE_INTERFACE

  

EOG_WINDOW_ERROR_IO

  

EOG_WINDOW_ERROR_TRASH_NOT_FOUND

  

EOG_WINDOW_ERROR_GENERIC

  

EOG_WINDOW_ERROR_UNKNOWN

  
-
-
-
-
-

enum EogStartupFlags

-
-

Members

-
----- - - - - - - - - - - - - - - - - - - - - - - -

EOG_STARTUP_FULLSCREEN

  

EOG_STARTUP_SLIDE_SHOW

  

EOG_STARTUP_DISABLE_GALLERY

  

EOG_STARTUP_SINGLE_WINDOW

  
-
-
-
-
-

struct EogWindow

-
struct EogWindow;
-
-
-
-

Property Details

-
-

The “gallery-position” property

-
  “gallery-position”         EogWindowGalleryPos
-

Determines the position of the image gallery in the window -relative to the image.

-

Flags: Read / Write

-

Default value: EOG_WINDOW_GALLERY_POS_BOTTOM

-
-
-
-

The “gallery-resizable” property

-
  “gallery-resizable”        gboolean
-

If TRUE the gallery will be resizable by the user otherwise it will be -in single column/row mode.

-

Flags: Read / Write

-

Default value: FALSE

-
-
-
-

The “startup-flags” property

-
  “startup-flags”            EogStartupFlags
-

A bitwise OR of EogStartupFlags elements, indicating how the window -should behave upon creation.

-

Flags: Read / Write / Construct Only

-
-
-
-

Signal Details

-
-

The “prepared” signal

-
void
-user_function (EogWindow *window,
-               gpointer   user_data)
-

The “prepared” signal is emitted when the window - is ready -to be shown.

-
-

Parameters

-
----- - - - - - - - - - - - - -

window

the object which received the signal.

 

user_data

user data set when the signal handler was connected.

 
-
-

Flags: Run Last

-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/EogFileChooser.html eog-3.27.90/doc/reference/html/EogFileChooser.html --- eog-3.26.2/doc/reference/html/EogFileChooser.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/EogFileChooser.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,123 +0,0 @@ - - - - -EogFileChooser: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogFileChooser

-

EogFileChooser

-
-
-

Functions

-
---- - - - - - - - - - - -
-GtkWidget * - -eog_file_chooser_new () -
-GdkPixbufFormat * - -eog_file_chooser_get_format () -
-
-
-

Types and Values

-
---- - - - - -
structEogFileChooser
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GInitiallyUnowned
-        ╰── GtkWidget
-            ╰── GtkContainer
-                ╰── GtkBin
-                    ╰── GtkWindow
-                        ╰── GtkDialog
-                            ╰── GtkFileChooserDialog
-                                ╰── EogFileChooser
-
-
-
-

Implemented Interfaces

-

-EogFileChooser implements - AtkImplementorIface, GtkBuildable and GtkFileChooser.

-
-
-

Description

-
-
-

Functions

-
-

eog_file_chooser_new ()

-
GtkWidget *
-eog_file_chooser_new (GtkFileChooserAction action);
-
-
-
-

eog_file_chooser_get_format ()

-
GdkPixbufFormat *
-eog_file_chooser_get_format (EogFileChooser *chooser);
-
-
-
-

Types and Values

-
-

struct EogFileChooser

-
struct EogFileChooser;
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/EogImageSaveInfo.html eog-3.27.90/doc/reference/html/EogImageSaveInfo.html --- eog-3.26.2/doc/reference/html/EogImageSaveInfo.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/EogImageSaveInfo.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,137 +0,0 @@ - - - - -EogImageSaveInfo: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogImageSaveInfo

-

EogImageSaveInfo

-
-
-

Functions

-
---- - - - - - - - - - - - - - - -
-EogImageSaveInfo * - -eog_image_save_info_new_from_image () -
-EogImageSaveInfo * - -eog_image_save_info_new_from_uri () -
-EogImageSaveInfo * - -eog_image_save_info_new_from_file () -
-
-
-

Types and Values

-
---- - - - - - - - - - - -
structEogImageSaveInfo
#defineEOG_FILE_FORMAT_JPEG
-
-
-

Object Hierarchy

-
    GObject
-    ╰── EogImageSaveInfo
-
-
-
-

Description

-
-
-

Functions

-
-

eog_image_save_info_new_from_image ()

-
EogImageSaveInfo *
-eog_image_save_info_new_from_image (EogImage *image);
-
-
-
-

eog_image_save_info_new_from_uri ()

-
EogImageSaveInfo *
-eog_image_save_info_new_from_uri (const char *uri,
-                                  GdkPixbufFormat *format);
-
-
-
-

eog_image_save_info_new_from_file ()

-
EogImageSaveInfo *
-eog_image_save_info_new_from_file (GFile *file,
-                                   GdkPixbufFormat *format);
-
-
-
-

Types and Values

-
-

struct EogImageSaveInfo

-
struct EogImageSaveInfo;
-
-
-
-

EOG_FILE_FORMAT_JPEG

-
#define EOG_FILE_FORMAT_JPEG   "jpeg"
-
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/EogScrollView.html eog-3.27.90/doc/reference/html/EogScrollView.html --- eog-3.26.2/doc/reference/html/EogScrollView.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/EogScrollView.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,795 +0,0 @@ - - - - -EogScrollView: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogScrollView

-

EogScrollView

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-GtkWidget * - -eog_scroll_view_new () -
-void - -eog_scroll_view_set_image () -
-void - -eog_scroll_view_set_scroll_wheel_zoom () -
-void - -eog_scroll_view_set_zoom_upscale () -
-void - -eog_scroll_view_set_zoom_multiplier () -
-void - -eog_scroll_view_set_antialiasing_in () -
-void - -eog_scroll_view_set_antialiasing_out () -
-void - -eog_scroll_view_set_transparency () -
-gboolean - -eog_scroll_view_scrollbars_visible () -
-void - -eog_scroll_view_set_popup () -
-void - -eog_scroll_view_zoom_in () -
-void - -eog_scroll_view_zoom_out () -
-void - -eog_scroll_view_set_zoom () -
-double - -eog_scroll_view_get_zoom () -
-gboolean - -eog_scroll_view_get_zoom_is_min () -
-gboolean - -eog_scroll_view_get_zoom_is_max () -
-EogZoomMode - -eog_scroll_view_get_zoom_mode () -
-void - -eog_scroll_view_set_zoom_mode () -
-void - -eog_scroll_view_show_cursor () -
-void - -eog_scroll_view_hide_cursor () -
-void - -eog_scroll_view_override_bg_color () -
-void - -eog_scroll_view_set_background_color () -
-void - -eog_scroll_view_set_transparency_color () -
-void - -eog_scroll_view_set_use_bg_color () -
-gboolean - -eog_scroll_view_event_is_over_image () -
-
-
-

Properties

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
gbooleanantialiasing-inRead / Write
gbooleanantialiasing-outRead / Write
-GdkRGBA *background-colorRead / Write
-EogImage *imageRead / Write
gbooleanscrollwheel-zoomRead / Write
-GdkRGBA *transparency-colorWrite
EogTransparencyStyletransparency-styleRead / Write
gbooleanuse-background-colorRead / Write
EogZoomModezoom-modeRead / Write
gdoublezoom-multiplierRead / Write
-
-
-

Signals

-
----- - - - - - - - - - - - - - - - - - - - - - - -
voidnext-imageRun Last
voidprevious-imageRun Last
voidrotation-changedRun Last
voidzoom-changedRun Last
-
-
-

Types and Values

-
---- - - - - - - - - - - - - - - -
structEogScrollView
enumEogTransparencyStyle
enumEogZoomMode
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GInitiallyUnowned
-        ╰── GtkWidget
-            ╰── GtkContainer
-                ╰── GtkGrid
-                    ╰── EogScrollView
-
-
-
-

Implemented Interfaces

-

-EogScrollView implements - AtkImplementorIface, GtkBuildable and GtkOrientable.

-
-
-

Description

-
-
-

Functions

-
-

eog_scroll_view_new ()

-
GtkWidget *
-eog_scroll_view_new (void);
-
-
-
-

eog_scroll_view_set_image ()

-
void
-eog_scroll_view_set_image (EogScrollView *view,
-                           EogImage *image);
-
-
-
-

eog_scroll_view_set_scroll_wheel_zoom ()

-
void
-eog_scroll_view_set_scroll_wheel_zoom (EogScrollView *view,
-                                       gboolean scroll_wheel_zoom);
-
-
-
-

eog_scroll_view_set_zoom_upscale ()

-
void
-eog_scroll_view_set_zoom_upscale (EogScrollView *view,
-                                  gboolean upscale);
-
-
-
-

eog_scroll_view_set_zoom_multiplier ()

-
void
-eog_scroll_view_set_zoom_multiplier (EogScrollView *view,
-                                     gdouble multiplier);
-
-
-
-

eog_scroll_view_set_antialiasing_in ()

-
void
-eog_scroll_view_set_antialiasing_in (EogScrollView *view,
-                                     gboolean state);
-
-
-
-

eog_scroll_view_set_antialiasing_out ()

-
void
-eog_scroll_view_set_antialiasing_out (EogScrollView *view,
-                                      gboolean state);
-
-
-
-

eog_scroll_view_set_transparency ()

-
void
-eog_scroll_view_set_transparency (EogScrollView *view,
-                                  EogTransparencyStyle style);
-
-
-
-

eog_scroll_view_scrollbars_visible ()

-
gboolean
-eog_scroll_view_scrollbars_visible (EogScrollView *view);
-
-
-
-

eog_scroll_view_set_popup ()

-
void
-eog_scroll_view_set_popup (EogScrollView *view,
-                           GtkMenu *menu);
-
-
-
-

eog_scroll_view_zoom_in ()

-
void
-eog_scroll_view_zoom_in (EogScrollView *view,
-                         gboolean smooth);
-
-
-
-

eog_scroll_view_zoom_out ()

-
void
-eog_scroll_view_zoom_out (EogScrollView *view,
-                          gboolean smooth);
-
-
-
-

eog_scroll_view_set_zoom ()

-
void
-eog_scroll_view_set_zoom (EogScrollView *view,
-                          double zoom);
-
-
-
-

eog_scroll_view_get_zoom ()

-
double
-eog_scroll_view_get_zoom (EogScrollView *view);
-
-
-
-

eog_scroll_view_get_zoom_is_min ()

-
gboolean
-eog_scroll_view_get_zoom_is_min (EogScrollView *view);
-
-
-
-

eog_scroll_view_get_zoom_is_max ()

-
gboolean
-eog_scroll_view_get_zoom_is_max (EogScrollView *view);
-
-
-
-

eog_scroll_view_get_zoom_mode ()

-
EogZoomMode
-eog_scroll_view_get_zoom_mode (EogScrollView *view);
-
-
-
-

eog_scroll_view_set_zoom_mode ()

-
void
-eog_scroll_view_set_zoom_mode (EogScrollView *view,
-                               EogZoomMode mode);
-
-
-
-

eog_scroll_view_show_cursor ()

-
void
-eog_scroll_view_show_cursor (EogScrollView *view);
-
-
-
-

eog_scroll_view_hide_cursor ()

-
void
-eog_scroll_view_hide_cursor (EogScrollView *view);
-
-
-
-

eog_scroll_view_override_bg_color ()

-
void
-eog_scroll_view_override_bg_color (EogScrollView *view,
-                                   const GdkRGBA *color);
-
-
-
-

eog_scroll_view_set_background_color ()

-
void
-eog_scroll_view_set_background_color (EogScrollView *view,
-                                      const GdkRGBA *color);
-
-
-
-

eog_scroll_view_set_transparency_color ()

-
void
-eog_scroll_view_set_transparency_color
-                               (EogScrollView *view,
-                                GdkRGBA *color);
-
-
-
-

eog_scroll_view_set_use_bg_color ()

-
void
-eog_scroll_view_set_use_bg_color (EogScrollView *view,
-                                  gboolean use);
-
-
-
-

eog_scroll_view_event_is_over_image ()

-
gboolean
-eog_scroll_view_event_is_over_image (EogScrollView *view,
-                                     const GdkEvent *ev);
-

Tells if ev -'s originates from inside the image area. view - must be -realized and have an image set for this to work.

-

It only works with GdkEvents that supply coordinate data, -i.e. GdkEventButton.

-
-

Parameters

-
----- - - - - - - - - - - - - -

view

An EogScrollView that has an image loaded.

 

ev

A GdkEvent which must have window-relative coordinates.

 
-
-
-

Returns

-

TRUE if ev -originates from over the image, FALSE otherwise.

-
-
-
-
-

Types and Values

-
-

struct EogScrollView

-
struct EogScrollView;
-
-
-
-

enum EogTransparencyStyle

-

Used to define how transparent image parts are drawn.

-
-

Members

-
----- - - - - - - - - - - - - - - - - - -

EOG_TRANSP_BACKGROUND

 -

Use the background color of the current UI theme

-		 

EOG_TRANSP_CHECKED

 -

Show transparent parts as a checkerboard pattern

-		 

EOG_TRANSP_COLOR

 -

Show transparent parts in a user defined color - (see “transparency-color” )

-		 
-
-
-
-
-

enum EogZoomMode

-

Used to determine the zooming behaviour of an EogScrollView.

-
-

Members

-
----- - - - - - - - - - - - - -

EOG_ZOOM_MODE_FREE

 -

Use the currently set zoom factor to display the image - (see eog_scroll_view_set_zoom()).

-		 

EOG_ZOOM_MODE_SHRINK_TO_FIT

 -

If an image is to large for the window, - zoom out until the image is fully visible. - This will never zoom in on smaller images.

-		 
-
-
-
-
-

Property Details

-
-

The “antialiasing-in” property

-
  “antialiasing-in”          gboolean
-

If TRUE the displayed image will be filtered in a second pass -while being zoomed in.

-

Flags: Read / Write

-

Default value: TRUE

-
-
-
-

The “antialiasing-out” property

-
  “antialiasing-out”         gboolean
-

If TRUE the displayed image will be filtered in a second pass -while being zoomed out.

-

Flags: Read / Write

-

Default value: TRUE

-
-
-
-

The “background-color” property

-
  “background-color”         GdkRGBA *
-

This is the default background color used for painting the background -of the image view. If set to NULL the color is determined by the -active GTK theme.

-

Flags: Read / Write

-
-
-
-

The “image” property

-
  “image”                    EogImage *
-

This is the currently display EogImage.

-

Flags: Read / Write

-
-
-
-

The “scrollwheel-zoom” property

-
  “scrollwheel-zoom”         gboolean
-

If TRUE the scrollwheel will zoom the view, otherwise it will be -used for scrolling a zoomed image.

-

Flags: Read / Write

-

Default value: TRUE

-
-
-
-

The “transparency-color” property

-
  “transparency-color”       GdkRGBA *
-

This is the color used to fill the transparent parts of an image -if “transparency-style” is set to EOG_TRANSP_COLOR.

-

Flags: Write

-
-
-
-

The “transparency-style” property

-
  “transparency-style”       EogTransparencyStyle
-

Determines how to fill the shown image's transparent areas.

-

Flags: Read / Write

-

Default value: EOG_TRANSP_CHECKED

-
-
-
-

The “use-background-color” property

-
  “use-background-color”     gboolean
-

Flags: Read / Write

-

Default value: FALSE

-
-
-
-

The “zoom-mode” property

-
  “zoom-mode”                EogZoomMode
-

Flags: Read / Write

-

Default value: EOG_ZOOM_MODE_SHRINK_TO_FIT

-
-
-
-

The “zoom-multiplier” property

-
  “zoom-multiplier”          gdouble
-

The current zoom factor is multiplied with this value + 1.0 when -scrolling with the scrollwheel to determine the next zoom factor.

-

Flags: Read / Write

-

Default value: 0.05

-
-
-
-

Signal Details

-
-

The “next-image” signal

-
void
-user_function (EogScrollView *eogscrollview,
-               gpointer       user_data)
-

Flags: Run Last

-
-
-
-

The “previous-image” signal

-
void
-user_function (EogScrollView *eogscrollview,
-               gpointer       user_data)
-

Flags: Run Last

-
-
-
-

The “rotation-changed” signal

-
void
-user_function (EogScrollView *eogscrollview,
-               gdouble        arg1,
-               gpointer       user_data)
-

Flags: Run Last

-
-
-
-

The “zoom-changed” signal

-
void
-user_function (EogScrollView *eogscrollview,
-               gdouble        arg1,
-               gpointer       user_data)
-

Flags: Run Last

-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/EogSidebar.html eog-3.27.90/doc/reference/html/EogSidebar.html --- eog-3.26.2/doc/reference/html/EogSidebar.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/EogSidebar.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,249 +0,0 @@ - - - - -EogSidebar: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogSidebar

-

EogSidebar

-
-
-

Functions

-
---- - - - - - - - - - - - - - - - - - - - - - - - - - - -
-GtkWidget * - -eog_sidebar_new () -
-void - -eog_sidebar_add_page () -
-void - -eog_sidebar_remove_page () -
-void - -eog_sidebar_set_page () -
-gint - -eog_sidebar_get_n_pages () -
-gboolean - -eog_sidebar_is_empty () -
-
-
-

Properties

-
----- - - - - - -
-GtkWidget *current-pageRead / Write
-
-
-

Signals

-
----- - - - - - - - - - - - - -
voidpage-addedRun First
voidpage-removedRun First
-
-
-

Types and Values

-
---- - - - - -
structEogSidebar
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GInitiallyUnowned
-        ╰── GtkWidget
-            ╰── GtkContainer
-                ╰── GtkBox
-                    ╰── EogSidebar
-
-
-
-

Implemented Interfaces

-

-EogSidebar implements - AtkImplementorIface, GtkBuildable and GtkOrientable.

-
-
-

Description

-
-
-

Functions

-
-

eog_sidebar_new ()

-
GtkWidget *
-eog_sidebar_new (void);
-
-
-
-

eog_sidebar_add_page ()

-
void
-eog_sidebar_add_page (EogSidebar *eog_sidebar,
-                      const gchar *title,
-                      GtkWidget *main_widget);
-
-
-
-

eog_sidebar_remove_page ()

-
void
-eog_sidebar_remove_page (EogSidebar *eog_sidebar,
-                         GtkWidget *main_widget);
-
-
-
-

eog_sidebar_set_page ()

-
void
-eog_sidebar_set_page (EogSidebar *eog_sidebar,
-                      GtkWidget *main_widget);
-
-
-
-

eog_sidebar_get_n_pages ()

-
gint
-eog_sidebar_get_n_pages (EogSidebar *eog_sidebar);
-
-
-
-

eog_sidebar_is_empty ()

-
gboolean
-eog_sidebar_is_empty (EogSidebar *eog_sidebar);
-
-
-
-

Types and Values

-
-

struct EogSidebar

-
struct EogSidebar;
-
-
-
-

Property Details

-
-

The “current-page” property

-
  “current-page”             GtkWidget *
-

The currently visible page.

-

Flags: Read / Write

-
-
-
-

Signal Details

-
-

The “page-added” signal

-
void
-user_function (EogSidebar *eogsidebar,
-               GtkWidget  *widget,
-               gpointer    user_data)
-

Flags: Run First

-
-
-
-

The “page-removed” signal

-
void
-user_function (EogSidebar *eogsidebar,
-               GtkWidget  *widget,
-               gpointer    user_data)
-

Flags: Run First

-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/EogStatusbar.html eog-3.27.90/doc/reference/html/EogStatusbar.html --- eog-3.26.2/doc/reference/html/EogStatusbar.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/EogStatusbar.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,138 +0,0 @@ - - - - -EogStatusbar: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogStatusbar

-

EogStatusbar

-
-
-

Functions

-
---- - - - - - - - - - - - - - - -
-GtkWidget * - -eog_statusbar_new () -
-void - -eog_statusbar_set_image_number () -
-void - -eog_statusbar_set_progress () -
-
-
-

Types and Values

-
---- - - - - -
structEogStatusbar
-
-
-

Object Hierarchy

-
    GObject
-    ╰── GInitiallyUnowned
-        ╰── GtkWidget
-            ╰── GtkContainer
-                ╰── GtkBox
-                    ╰── GtkStatusbar
-                        ╰── EogStatusbar
-
-
-
-

Implemented Interfaces

-

-EogStatusbar implements - AtkImplementorIface, GtkBuildable and GtkOrientable.

-
-
-

Description

-
-
-

Functions

-
-

eog_statusbar_new ()

-
GtkWidget *
-eog_statusbar_new (void);
-
-
-
-

eog_statusbar_set_image_number ()

-
void
-eog_statusbar_set_image_number (EogStatusbar *statusbar,
-                                gint num,
-                                gint tot);
-
-
-
-

eog_statusbar_set_progress ()

-
void
-eog_statusbar_set_progress (EogStatusbar *statusbar,
-                            gdouble progress);
-
-
-
-

Types and Values

-
-

struct EogStatusbar

-
struct EogStatusbar;
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/EogWindowActivatable.html eog-3.27.90/doc/reference/html/EogWindowActivatable.html --- eog-3.26.2/doc/reference/html/EogWindowActivatable.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/EogWindowActivatable.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,162 +0,0 @@ - - - - -EogWindowActivatable: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

EogWindowActivatable

-

EogWindowActivatable

-
-
-

Functions

-
---- - - - - - - - - - - -
-void - -eog_window_activatable_activate () -
-void - -eog_window_activatable_deactivate () -
-
-
-

Properties

-
----- - - - - - -
-EogWindow *windowRead / Write / Construct Only
-
-
-

Types and Values

-
---- - - - - - - - - - - -
 EogWindowActivatable
structEogWindowActivatableInterface
-
-
-

Object Hierarchy

-
    GInterface
-    ╰── EogWindowActivatable
-
-
-
-

Prerequisites

-

-EogWindowActivatable requires - GObject.

-
-
-

Description

-
-
-

Functions

-
-

eog_window_activatable_activate ()

-
void
-eog_window_activatable_activate (EogWindowActivatable *activatable);
-
-
-
-

eog_window_activatable_deactivate ()

-
void
-eog_window_activatable_deactivate (EogWindowActivatable *activatable);
-
-
-
-

Types and Values

-
-

EogWindowActivatable

-
typedef struct _EogWindowActivatable EogWindowActivatable;
-
-
-
-

struct EogWindowActivatableInterface

-
struct EogWindowActivatableInterface {
-	GTypeInterface g_iface;
-
-	/* vfuncs */
-
-	void (*activate) (EogWindowActivatable *activatable);
-	void (*deactivate) (EogWindowActivatable *activatable);
-};
-
-
-
-
-

Property Details

-
-

The “window” property

-
  “window”                   EogWindow *
-

This is the EogWindow this EogWindowActivatable instance -should be attached to.

-

Flags: Read / Write / Construct Only

-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/eog-zoom.html eog-3.27.90/doc/reference/html/eog-zoom.html --- eog-3.26.2/doc/reference/html/eog-zoom.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/eog-zoom.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,190 +0,0 @@ - - - - -zoom: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-
- - -
-

zoom

-

zoom

-
-
-

Functions

-
---- - - - - - - - - - - -
-void - -zoom_fit_size () -
-double - -zoom_fit_scale () -
-
-
-

Description

-
-
-

Functions

-
-

zoom_fit_size ()

-
void
-zoom_fit_size (guint dest_width,
-               guint dest_height,
-               guint src_width,
-               guint src_height,
-               gboolean upscale_smaller,
-               guint *width,
-               guint *height);
-

Computes the final dimensions of an image that is to be scaled to fit to a -certain size. If upscale_smaller - is TRUE, then images smaller than the -destination size will be scaled up; otherwise, they will be left at their -original size.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

dest_width

Width of destination area.

 

dest_height

Height of destination area.

 

src_width

Width of source image.

 

src_height

Height of source image.

 

upscale_smaller

Whether to scale up images smaller than the destination size.

 

width

Return value for image width.

 

height

Return value for image height.

 
-
-
-
-
-

zoom_fit_scale ()

-
double
-zoom_fit_scale (guint dest_width,
-                guint dest_height,
-                guint src_width,
-                guint src_height,
-                gboolean upscale_smaller);
-

Similar to zoom_fit_size(), but returns the zoom factor of the final image -with respect to the original image's size.

-
-

Parameters

-
----- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

dest_width

Width of destination area.

 

dest_height

Height of destination area.

 

src_width

Width of source image.

 

src_height

Height of source image.

 

upscale_smaller

Whether to scale up images smaller than the destination size.

 
-
-
-

Returns

-

Zoom factor with respect to the original size.

-
-
-
-
-

Types and Values

-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/doc/reference/html/home.png and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/doc/reference/html/home.png differ diff -Nru eog-3.26.2/doc/reference/html/index.html eog-3.27.90/doc/reference/html/index.html --- eog-3.26.2/doc/reference/html/index.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/index.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,141 +0,0 @@ - - - - -Eye of GNOME Reference Manual: Eye of GNOME Reference Manual - - - - - - - -
-
-
-
-

- for Eye of GNOME 3.26.2 - -

-
-
-
-
-
I. API Reference
-
-
User Interface
-
-
-EogPropertiesDialog -
-
-EogListStore -
-
-EogFileChooser -
-
-EogThumbNav -
-
-EogThumbView -
-
-EogScrollView -
-
-EogWindow -
-
-EogWindowActivatable -
-
-EogStatusbar -
-
-EogSidebar -
-
-eog-thumbnail -
-
-eog-save-as-dialog-helper -
-
-eog-error-message-area -
-
-
Image data and manipulation
-
-
-EogImage -
-
-EogImageSaveInfo -
-
-EogTransform -
-
-EogClipboardHandler -
-
-
Printing
-
-eog-print -
-
Application and configuration
-
-
-EogApplication -
-
-eog-session -
-
-eog-config-keys -
-
-
Utilities
-
-
-eog-debug -
-
-EogURIConverter -
-
-eog-util -
-
-eog-exif-util -
-
-eog-pixbuf-util -
-
-zoom -
-
-
Asynchronous jobs
-
-
-EogJob -
-
-EogJobScheduler -
-
-
-
I. Appendix
-
-
API Index
-
Annotation Glossary
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/doc/reference/html/left-insensitive.png and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/doc/reference/html/left-insensitive.png differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/doc/reference/html/left.png and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/doc/reference/html/left.png differ diff -Nru eog-3.26.2/doc/reference/html/pt01.html eog-3.27.90/doc/reference/html/pt01.html --- eog-3.26.2/doc/reference/html/pt01.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/pt01.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - -Part I. Appendix: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-

-Part I. Appendix

-
-

Table of Contents

-
-
API Index
-
Annotation Glossary
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/doc/reference/html/right-insensitive.png and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/doc/reference/html/right-insensitive.png differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/doc/reference/html/right.png and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/doc/reference/html/right.png differ diff -Nru eog-3.26.2/doc/reference/html/rn01.html eog-3.27.90/doc/reference/html/rn01.html --- eog-3.26.2/doc/reference/html/rn01.html 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/rn01.html 1970-01-01 00:00:00.000000000 +0000 @@ -1,140 +0,0 @@ - - - - -API Reference: Eye of GNOME Reference Manual - - - - - - - - - - - - - - - - -
-
-

-API Reference

-
-
-
-

Table of Contents

-
-
User Interface
-
-
-EogPropertiesDialog -
-
-EogListStore -
-
-EogFileChooser -
-
-EogThumbNav -
-
-EogThumbView -
-
-EogScrollView -
-
-EogWindow -
-
-EogWindowActivatable -
-
-EogStatusbar -
-
-EogSidebar -
-
-eog-thumbnail -
-
-eog-save-as-dialog-helper -
-
-eog-error-message-area -
-
-
Image data and manipulation
-
-
-EogImage -
-
-EogImageSaveInfo -
-
-EogTransform -
-
-EogClipboardHandler -
-
-
Printing
-
-eog-print -
-
Application and configuration
-
-
-EogApplication -
-
-eog-session -
-
-eog-config-keys -
-
-
Utilities
-
-
-eog-debug -
-
-EogURIConverter -
-
-eog-util -
-
-eog-exif-util -
-
-eog-pixbuf-util -
-
-zoom -
-
-
Asynchronous jobs
-
-
-EogJob -
-
-EogJobScheduler -
-
-
-
-
-
-
Generated by GTK-Doc V1.26
- - \ No newline at end of file diff -Nru eog-3.26.2/doc/reference/html/style.css eog-3.27.90/doc/reference/html/style.css --- eog-3.26.2/doc/reference/html/style.css 2017-11-08 20:55:35.000000000 +0000 +++ eog-3.27.90/doc/reference/html/style.css 1970-01-01 00:00:00.000000000 +0000 @@ -1,479 +0,0 @@ -body -{ - font-family: cantarell, sans-serif; -} -.synopsis, .classsynopsis -{ - /* tango:aluminium 1/2 */ - background: #eeeeec; - background: rgba(238, 238, 236, 0.5); - border: solid 1px rgb(238, 238, 236); - padding: 0.5em; -} -.programlisting -{ - /* tango:sky blue 0/1 */ - /* fallback for no rgba support */ - background: #e6f3ff; - border: solid 1px #729fcf; - background: rgba(114, 159, 207, 0.1); - border: solid 1px rgba(114, 159, 207, 0.2); - padding: 0.5em; -} -.variablelist -{ - padding: 4px; - margin-left: 3em; -} -.variablelist td:first-child -{ - vertical-align: top; -} - -div.gallery-float -{ - float: left; - padding: 10px; -} -div.gallery-float img -{ - border-style: none; -} -div.gallery-spacer -{ - clear: both; -} - -a, a:visited -{ - text-decoration: none; - /* tango:sky blue 2 */ - color: #3465a4; -} -a:hover -{ - text-decoration: underline; - /* tango:sky blue 1 */ - color: #729fcf; -} - -div.informaltable table -{ - border-collapse: separate; - border-spacing: 1em 0.3em; - border: none; -} - -div.informaltable table td, div.informaltable table th -{ - vertical-align: top; -} - -.function_type, -.variable_type, -.property_type, -.signal_type, -.parameter_name, -.struct_member_name, -.union_member_name, -.define_keyword, -.datatype_keyword, -.typedef_keyword -{ - text-align: right; -} - -/* dim non-primary columns */ -.c_punctuation, -.function_type, -.variable_type, -.property_type, -.signal_type, -.define_keyword, -.datatype_keyword, -.typedef_keyword, -.property_flags, -.signal_flags, -.parameter_annotations, -.enum_member_annotations, -.struct_member_annotations, -.union_member_annotations -{ - color: #888a85; -} - -.function_type a, -.function_type a:visited, -.function_type a:hover, -.property_type a, -.property_type a:visited, -.property_type a:hover, -.signal_type a, -.signal_type a:visited, -.signal_type a:hover, -.signal_flags a, -.signal_flags a:visited, -.signal_flags a:hover -{ - color: #729fcf; -} - -td p -{ - margin: 0.25em; -} - -div.table table -{ - border-collapse: collapse; - border-spacing: 0px; - /* tango:aluminium 3 */ - border: solid 1px #babdb6; -} - -div.table table td, div.table table th -{ - /* tango:aluminium 3 */ - border: solid 1px #babdb6; - padding: 3px; - vertical-align: top; -} - -div.table table th -{ - /* tango:aluminium 2 */ - background-color: #d3d7cf; -} - -h4 -{ - color: #555753; - margin-top: 1em; - margin-bottom: 1em; -} - -hr -{ - /* tango:aluminium 1 */ - color: #d3d7cf; - background: #d3d7cf; - border: none 0px; - height: 1px; - clear: both; - margin: 2.0em 0em 2.0em 0em; -} - -dl.toc dt -{ - padding-bottom: 0.25em; -} - -dl.toc > dt -{ - padding-top: 0.25em; - padding-bottom: 0.25em; - font-weight: bold; -} - -dl.toc > dl -{ - padding-bottom: 0.5em; -} - -.parameter -{ - font-style: normal; -} - -.footer -{ - padding-top: 3.5em; - /* tango:aluminium 3 */ - color: #babdb6; - text-align: center; - font-size: 80%; -} - -.informalfigure, -.figure -{ - margin: 1em; -} - -.informalexample, -.example -{ - margin-top: 1em; - margin-bottom: 1em; -} - -.warning -{ - /* tango:orange 0/1 */ - background: #ffeed9; - background: rgba(252, 175, 62, 0.1); - border-color: #ffb04f; - border-color: rgba(252, 175, 62, 0.2); -} -.note -{ - /* tango:chameleon 0/0.5 */ - background: #d8ffb2; - background: rgba(138, 226, 52, 0.1); - border-color: #abf562; - border-color: rgba(138, 226, 52, 0.2); -} -div.blockquote -{ - border-color: #eeeeec; -} -.note, .warning, div.blockquote -{ - padding: 0.5em; - border-width: 1px; - border-style: solid; - margin: 2em; -} -.note p, .warning p -{ - margin: 0; -} - -div.warning h3.title, -div.note h3.title -{ - display: none; -} - -p + div.section -{ - margin-top: 1em; -} - -div.refnamediv, -div.refsynopsisdiv, -div.refsect1, -div.refsect2, -div.toc, -div.section -{ - margin-bottom: 1em; -} - -/* blob links */ -h2 .extralinks, h3 .extralinks -{ - float: right; - /* tango:aluminium 3 */ - color: #babdb6; - font-size: 80%; - font-weight: normal; -} - -.lineart -{ - color: #d3d7cf; - font-weight: normal; -} - -.annotation -{ - /* tango:aluminium 5 */ - color: #555753; - font-weight: normal; -} - -.structfield -{ - font-style: normal; - font-weight: normal; -} - -acronym,abbr -{ - border-bottom: 1px dotted gray; -} - -/* code listings */ - -.listing_code .programlisting .normal, -.listing_code .programlisting .normal a, -.listing_code .programlisting .number, -.listing_code .programlisting .cbracket, -.listing_code .programlisting .symbol { color: #555753; } -.listing_code .programlisting .comment, -.listing_code .programlisting .linenum { color: #babdb6; } /* tango: aluminium 3 */ -.listing_code .programlisting .function, -.listing_code .programlisting .function a, -.listing_code .programlisting .preproc { color: #204a87; } /* tango: sky blue 3 */ -.listing_code .programlisting .string { color: #ad7fa8; } /* tango: plum */ -.listing_code .programlisting .keyword, -.listing_code .programlisting .usertype, -.listing_code .programlisting .type, -.listing_code .programlisting .type a { color: #4e9a06; } /* tango: chameleon 3 */ - -.listing_frame { - /* tango:sky blue 1 */ - border: solid 1px #729fcf; - border: solid 1px rgba(114, 159, 207, 0.2); - padding: 0px; -} - -.listing_lines, .listing_code { - margin-top: 0px; - margin-bottom: 0px; - padding: 0.5em; -} -.listing_lines { - /* tango:sky blue 0.5 */ - background: #a6c5e3; - background: rgba(114, 159, 207, 0.2); - /* tango:aluminium 6 */ - color: #2e3436; -} -.listing_code { - /* tango:sky blue 0 */ - background: #e6f3ff; - background: rgba(114, 159, 207, 0.1); -} -.listing_code .programlisting { - /* override from previous */ - border: none 0px; - padding: 0px; - background: none; -} -.listing_lines pre, .listing_code pre { - margin: 0px; -} - -@media screen { - /* these have a as a first child, but since there are no parent selectors - * we can't use that. */ - a.footnote - { - position: relative; - top: 0em ! important; - } - /* this is needed so that the local anchors are displayed below the naviagtion */ - div.footnote a[name], div.refnamediv a[name], div.refsect1 a[name], div.refsect2 a[name], div.index a[name], div.glossary a[name], div.sect1 a[name] - { - display: inline-block; - position: relative; - top:-5em; - } - /* this seems to be a bug in the xsl style sheets when generating indexes */ - div.index div.index - { - top: 0em; - } - /* make space for the fixed navigation bar and add space at the bottom so that - * link targets appear somewhat close to top - */ - body - { - padding-top: 2.5em; - padding-bottom: 500px; - max-width: 60em; - } - p - { - max-width: 60em; - } - /* style and size the navigation bar */ - table.navigation#top - { - position: fixed; - background: #e2e2e2; - border-bottom: solid 1px #babdb6; - border-spacing: 5px; - margin-top: 0; - margin-bottom: 0; - top: 0; - left: 0; - z-index: 10; - } - table.navigation#top td - { - padding-left: 6px; - padding-right: 6px; - } - .navigation a, .navigation a:visited - { - /* tango:sky blue 3 */ - color: #204a87; - } - .navigation a:hover - { - /* tango:sky blue 2 */ - color: #3465a4; - } - td.shortcuts - { - /* tango:sky blue 2 */ - color: #3465a4; - font-size: 80%; - white-space: nowrap; - } - td.shortcuts .dim - { - color: #babdb6; - } - .navigation .title - { - font-size: 80%; - max-width: none; - margin: 0px; - font-weight: normal; - } -} -@media screen and (min-width: 60em) { - /* screen larger than 60em */ - body { margin: auto; } -} -@media screen and (max-width: 60em) { - /* screen less than 60em */ - #nav_hierarchy { display: none; } - #nav_interfaces { display: none; } - #nav_prerequisites { display: none; } - #nav_derived_interfaces { display: none; } - #nav_implementations { display: none; } - #nav_child_properties { display: none; } - #nav_style_properties { display: none; } - #nav_index { display: none; } - #nav_glossary { display: none; } - .gallery_image { display: none; } - .property_flags { display: none; } - .signal_flags { display: none; } - .parameter_annotations { display: none; } - .enum_member_annotations { display: none; } - .struct_member_annotations { display: none; } - .union_member_annotations { display: none; } - /* now that a column is hidden, optimize space */ - col.parameters_name { width: auto; } - col.parameters_description { width: auto; } - col.struct_members_name { width: auto; } - col.struct_members_description { width: auto; } - col.enum_members_name { width: auto; } - col.enum_members_description { width: auto; } - col.union_members_name { width: auto; } - col.union_members_description { width: auto; } - .listing_lines { display: none; } -} -@media print { - table.navigation { - visibility: collapse; - display: none; - } - div.titlepage table.navigation { - visibility: visible; - display: table; - background: #e2e2e2; - border: solid 1px #babdb6; - margin-top: 0; - margin-bottom: 0; - top: 0; - left: 0; - height: 3em; - } -} - Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/doc/reference/html/up-insensitive.png and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/doc/reference/html/up-insensitive.png differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/doc/reference/html/up.png and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/doc/reference/html/up.png differ diff -Nru eog-3.26.2/doc/reference/Makefile.am eog-3.27.90/doc/reference/Makefile.am --- eog-3.26.2/doc/reference/Makefile.am 2017-11-08 20:33:41.000000000 +0000 +++ eog-3.27.90/doc/reference/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,145 +0,0 @@ -## Process this file with automake to produce Makefile.in - -# We require automake 1.6 at least. -AUTOMAKE_OPTIONS = 1.6 - -# This is a blank Makefile.am for using gtk-doc. -# Copy this to your project's API docs directory and modify the variables to -# suit your project. See the GTK+ Makefiles in gtk+/docs/reference for examples -# of using the various options. - -# The name of the module, e.g. 'glib'. -DOC_MODULE=eog - -# Uncomment for versioned docs and specify the version of the module, e.g. '2'. -#DOC_MODULE_VERSION=2 - - -# The top-level XML file (SGML in the past). You can change this if you want to. -DOC_MAIN_SGML_FILE=$(DOC_MODULE)-docs.xml - -# Directories containing the source code. -# gtk-doc will search all .c and .h files beneath these paths -# for inline comments documenting functions and macros. -# e.g. DOC_SOURCE_DIR=$(top_srcdir)/gtk $(top_srcdir)/gdk -DOC_SOURCE_DIR=$(top_srcdir)/src - -# Extra options to pass to gtkdoc-scangobj. Not normally needed. -SCANGOBJ_OPTIONS= - -# Extra options to supply to gtkdoc-scan. -# e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED" -SCAN_OPTIONS=--rebuild-types - -# Extra options to supply to gtkdoc-mkdb. -# e.g. MKDB_OPTIONS=--xml-mode --output-format=xml -MKDB_OPTIONS=--xml-mode --output-format=xml - -# Extra options to supply to gtkdoc-mktmpl -# e.g. MKTMPL_OPTIONS=--only-section-tmpl -MKTMPL_OPTIONS= - -# Extra options to supply to gtkdoc-mkhtml -MKHTML_OPTIONS= - -# Extra options to supply to gtkdoc-fixref. Not normally needed. -# e.g. FIXXREF_OPTIONS=--extra-dir=../gdk-pixbuf/html --extra-dir=../gdk/html -FIXXREF_OPTIONS= - -# Used for dependencies. The docs will be rebuilt if any of these change. -# e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h -# e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c -HFILE_GLOB=$(top_srcdir)/src/*.h -CFILE_GLOB=$(top_srcdir)/src/*.c - -# Extra header to include when scanning, which are not under DOC_SOURCE_DIR -# e.g. EXTRA_HFILES=$(top_srcdir}/contrib/extra.h -EXTRA_HFILES= - -# Header files or dirs to ignore when scanning. Use base file/dir names -# e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h private_code -IGNORE_HFILES= \ - eog-application-service.h \ - eog-close-confirmation-dialog.h \ - eog-enum-types.h \ - eog-image-private.h \ - eog-image-jpeg.h \ - eog-marshal.h \ - eog-metadata-details.h \ - eog-metadata-reader.h \ - eog-metadata-reader-jpg.h \ - eog-metadata-reader-png.h \ - eog-metadata-sidebar.h \ - eog-module.h \ - eog-plugin-engine.h \ - eog-preferences-dialog.h \ - eog-print-image-setup.h \ - eog-print-preview.h - -if !HAVE_EXIF -IGNORE_HFILES += \ - eog-exif-util.h -endif - -# Images to copy into HTML directory. -# e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png -HTML_IMAGES= - -# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE). -# e.g. content_files=running.sgml building.sgml changes-2.0.sgml -content_files= version.xml - -# SGML files where gtk-doc abbrevations (#GtkWidget) are expanded -# These files must be listed here *and* in content_files -# e.g. expand_content_files=running.sgml -expand_content_files= - -# CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library. -# Only needed if you are using gtkdoc-scangobj to dynamically query widget -# signals and properties. -# e.g. GTKDOC_CFLAGS=-I$(top_srcdir) -I$(top_builddir) $(GTK_DEBUG_FLAGS) -# e.g. GTKDOC_LIBS=$(top_builddir)/gtk/$(gtktargetlib) -GTKDOC_CFLAGS= \ - -I$(top_srcdir) \ - -I$(top_builddir) \ - -I$(top_srcdir)/src \ - -I$(top_srcdir)/plugins \ - -I$(top_srcdir)/jpegutils \ - $(EOG_CFLAGS) - -if ENABLE_JPEG -jpeg_LIB = $(top_builddir)/jpegutils/libeog-jpegutils.la -endif - -GTKDOC_LIBS=\ - $(top_builddir)/src/libeog.la \ - $(BINDING_LIBS) \ - $(LIBJPEG) \ - $(X_LIBS) \ - $(EOG_LIBS) \ - $(jpeg_LIB) \ - $(MORE_GTKDOC_LIBS) - -# This includes the standard gtk-doc make rules, copied by gtkdocize. -include $(top_srcdir)/gtk-doc.make - -# Other files to distribute -# e.g. EXTRA_DIST += version.xml.in -EXTRA_DIST += version.xml.in \ - $(DOC_MODULE)-docs.xml.in - -# Files not to distribute -# for --rebuild-types in $(SCAN_OPTIONS), e.g. $(DOC_MODULE).types -# for --rebuild-sections in $(SCAN_OPTIONS) e.g. $(DOC_MODULE)-sections.txt -DISTCLEANFILES = $(DOC_MODULE).types - -# Comment this out if you want 'make check' to test you doc status -# and run some sanity checks -if ENABLE_GTK_DOC -TESTS_ENVIRONMENT = \ - DOC_MODULE=$(DOC_MODULE) DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \ - SRCDIR=$(abs_srcdir) BUILDDIR=$(abs_builddir) -#TESTS = $(GTKDOC_CHECK) -endif - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/doc/reference/Makefile.in eog-3.27.90/doc/reference/Makefile.in --- eog-3.26.2/doc/reference/Makefile.in 2017-11-08 20:34:32.000000000 +0000 +++ eog-3.27.90/doc/reference/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,928 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# -*- mode: makefile -*- - -#################################### -# Everything below here is generic # -#################################### -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -@HAVE_EXIF_FALSE@am__append_1 = \ -@HAVE_EXIF_FALSE@ eog-exif-util.h - -subdir = doc/reference -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = version.xml eog-docs.xml -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/eog-docs.xml.in \ - $(srcdir)/version.xml.in $(top_srcdir)/gtk-doc.make -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ - -# We require automake 1.6 at least. -AUTOMAKE_OPTIONS = 1.6 - -# This is a blank Makefile.am for using gtk-doc. -# Copy this to your project's API docs directory and modify the variables to -# suit your project. See the GTK+ Makefiles in gtk+/docs/reference for examples -# of using the various options. - -# The name of the module, e.g. 'glib'. -DOC_MODULE = eog - -# Uncomment for versioned docs and specify the version of the module, e.g. '2'. -#DOC_MODULE_VERSION=2 - -# The top-level XML file (SGML in the past). You can change this if you want to. -DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.xml - -# Directories containing the source code. -# gtk-doc will search all .c and .h files beneath these paths -# for inline comments documenting functions and macros. -# e.g. DOC_SOURCE_DIR=$(top_srcdir)/gtk $(top_srcdir)/gdk -DOC_SOURCE_DIR = $(top_srcdir)/src - -# Extra options to pass to gtkdoc-scangobj. Not normally needed. -SCANGOBJ_OPTIONS = - -# Extra options to supply to gtkdoc-scan. -# e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED" -SCAN_OPTIONS = --rebuild-types - -# Extra options to supply to gtkdoc-mkdb. -# e.g. MKDB_OPTIONS=--xml-mode --output-format=xml -MKDB_OPTIONS = --xml-mode --output-format=xml - -# Extra options to supply to gtkdoc-mktmpl -# e.g. MKTMPL_OPTIONS=--only-section-tmpl -MKTMPL_OPTIONS = - -# Extra options to supply to gtkdoc-mkhtml -MKHTML_OPTIONS = - -# Extra options to supply to gtkdoc-fixref. Not normally needed. -# e.g. FIXXREF_OPTIONS=--extra-dir=../gdk-pixbuf/html --extra-dir=../gdk/html -FIXXREF_OPTIONS = - -# Used for dependencies. The docs will be rebuilt if any of these change. -# e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h -# e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c -HFILE_GLOB = $(top_srcdir)/src/*.h -CFILE_GLOB = $(top_srcdir)/src/*.c - -# Extra header to include when scanning, which are not under DOC_SOURCE_DIR -# e.g. EXTRA_HFILES=$(top_srcdir}/contrib/extra.h -EXTRA_HFILES = - -# Header files or dirs to ignore when scanning. Use base file/dir names -# e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h private_code -IGNORE_HFILES = eog-application-service.h \ - eog-close-confirmation-dialog.h eog-enum-types.h \ - eog-image-private.h eog-image-jpeg.h eog-marshal.h \ - eog-metadata-details.h eog-metadata-reader.h \ - eog-metadata-reader-jpg.h eog-metadata-reader-png.h \ - eog-metadata-sidebar.h eog-module.h eog-plugin-engine.h \ - eog-preferences-dialog.h eog-print-image-setup.h \ - eog-print-preview.h $(am__append_1) - -# Images to copy into HTML directory. -# e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png -HTML_IMAGES = - -# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE). -# e.g. content_files=running.sgml building.sgml changes-2.0.sgml -content_files = version.xml - -# SGML files where gtk-doc abbrevations (#GtkWidget) are expanded -# These files must be listed here *and* in content_files -# e.g. expand_content_files=running.sgml -expand_content_files = - -# CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library. -# Only needed if you are using gtkdoc-scangobj to dynamically query widget -# signals and properties. -# e.g. GTKDOC_CFLAGS=-I$(top_srcdir) -I$(top_builddir) $(GTK_DEBUG_FLAGS) -# e.g. GTKDOC_LIBS=$(top_builddir)/gtk/$(gtktargetlib) -GTKDOC_CFLAGS = \ - -I$(top_srcdir) \ - -I$(top_builddir) \ - -I$(top_srcdir)/src \ - -I$(top_srcdir)/plugins \ - -I$(top_srcdir)/jpegutils \ - $(EOG_CFLAGS) - -@ENABLE_JPEG_TRUE@jpeg_LIB = $(top_builddir)/jpegutils/libeog-jpegutils.la -GTKDOC_LIBS = \ - $(top_builddir)/src/libeog.la \ - $(BINDING_LIBS) \ - $(LIBJPEG) \ - $(X_LIBS) \ - $(EOG_LIBS) \ - $(jpeg_LIB) \ - $(MORE_GTKDOC_LIBS) - -@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_RUN = -@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_RUN = $(LIBTOOL) --mode=execute - -# We set GPATH here; this gives us semantics for GNU make -# which are more like other make's VPATH, when it comes to -# whether a source that is a target of one rule is then -# searched for in VPATH/GPATH. -# -GPATH = $(srcdir) -TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE) -SETUP_FILES = \ - $(content_files) \ - $(expand_content_files) \ - $(DOC_MAIN_SGML_FILE) \ - $(DOC_MODULE)-sections.txt \ - $(DOC_MODULE)-overrides.txt - - -# This includes the standard gtk-doc make rules, copied by gtkdocize. - -# Other files to distribute -# e.g. EXTRA_DIST += version.xml.in -EXTRA_DIST = $(HTML_IMAGES) $(SETUP_FILES) version.xml.in \ - $(DOC_MODULE)-docs.xml.in -DOC_STAMPS = setup-build.stamp scan-build.stamp sgml-build.stamp \ - html-build.stamp pdf-build.stamp \ - sgml.stamp html.stamp pdf.stamp - -SCANOBJ_FILES = \ - $(DOC_MODULE).args \ - $(DOC_MODULE).hierarchy \ - $(DOC_MODULE).interfaces \ - $(DOC_MODULE).prerequisites \ - $(DOC_MODULE).signals - -REPORT_FILES = \ - $(DOC_MODULE)-undocumented.txt \ - $(DOC_MODULE)-undeclared.txt \ - $(DOC_MODULE)-unused.txt - -CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) gtkdoc-check.test -@GTK_DOC_BUILD_HTML_FALSE@HTML_BUILD_STAMP = -@GTK_DOC_BUILD_HTML_TRUE@HTML_BUILD_STAMP = html-build.stamp -@GTK_DOC_BUILD_PDF_FALSE@PDF_BUILD_STAMP = -@GTK_DOC_BUILD_PDF_TRUE@PDF_BUILD_STAMP = pdf-build.stamp - -#### setup #### -GTK_DOC_V_SETUP = $(GTK_DOC_V_SETUP_@AM_V@) -GTK_DOC_V_SETUP_ = $(GTK_DOC_V_SETUP_@AM_DEFAULT_V@) -GTK_DOC_V_SETUP_0 = @echo " DOC Preparing build"; - -#### scan #### -GTK_DOC_V_SCAN = $(GTK_DOC_V_SCAN_@AM_V@) -GTK_DOC_V_SCAN_ = $(GTK_DOC_V_SCAN_@AM_DEFAULT_V@) -GTK_DOC_V_SCAN_0 = @echo " DOC Scanning header files"; -GTK_DOC_V_INTROSPECT = $(GTK_DOC_V_INTROSPECT_@AM_V@) -GTK_DOC_V_INTROSPECT_ = $(GTK_DOC_V_INTROSPECT_@AM_DEFAULT_V@) -GTK_DOC_V_INTROSPECT_0 = @echo " DOC Introspecting gobjects"; - -#### xml #### -GTK_DOC_V_XML = $(GTK_DOC_V_XML_@AM_V@) -GTK_DOC_V_XML_ = $(GTK_DOC_V_XML_@AM_DEFAULT_V@) -GTK_DOC_V_XML_0 = @echo " DOC Building XML"; - -#### html #### -GTK_DOC_V_HTML = $(GTK_DOC_V_HTML_@AM_V@) -GTK_DOC_V_HTML_ = $(GTK_DOC_V_HTML_@AM_DEFAULT_V@) -GTK_DOC_V_HTML_0 = @echo " DOC Building HTML"; -GTK_DOC_V_XREF = $(GTK_DOC_V_XREF_@AM_V@) -GTK_DOC_V_XREF_ = $(GTK_DOC_V_XREF_@AM_DEFAULT_V@) -GTK_DOC_V_XREF_0 = @echo " DOC Fixing cross-references"; - -#### pdf #### -GTK_DOC_V_PDF = $(GTK_DOC_V_PDF_@AM_V@) -GTK_DOC_V_PDF_ = $(GTK_DOC_V_PDF_@AM_DEFAULT_V@) -GTK_DOC_V_PDF_0 = @echo " DOC Building PDF"; - -# Files not to distribute -# for --rebuild-types in $(SCAN_OPTIONS), e.g. $(DOC_MODULE).types -# for --rebuild-sections in $(SCAN_OPTIONS) e.g. $(DOC_MODULE)-sections.txt -DISTCLEANFILES = $(DOC_MODULE).types - -# Comment this out if you want 'make check' to test you doc status -# and run some sanity checks -@ENABLE_GTK_DOC_TRUE@TESTS_ENVIRONMENT = \ -@ENABLE_GTK_DOC_TRUE@ DOC_MODULE=$(DOC_MODULE) DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \ -@ENABLE_GTK_DOC_TRUE@ SRCDIR=$(abs_srcdir) BUILDDIR=$(abs_builddir) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/reference/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign doc/reference/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; -$(top_srcdir)/gtk-doc.make $(am__empty): - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -eog-docs.xml: $(top_builddir)/config.status $(srcdir)/eog-docs.xml.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook -check-am: all-am -check: check-am -@ENABLE_GTK_DOC_FALSE@all-local: -all-am: Makefile all-local -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-local mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-local - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-data-local - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic \ - maintainer-clean-local - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-local - -.MAKE: install-am install-strip - -.PHONY: all all-am all-local check check-am clean clean-generic \ - clean-libtool clean-local cscopelist-am ctags-am dist-hook \ - distclean distclean-generic distclean-libtool distclean-local \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-data-local \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - maintainer-clean-local mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ - uninstall-am uninstall-local - -.PRECIOUS: Makefile - - -gtkdoc-check.test: Makefile - $(AM_V_GEN)echo "#!/bin/sh -e" > $@; \ - echo "$(GTKDOC_CHECK_PATH) || exit 1" >> $@; \ - chmod +x $@ - -all-gtk-doc: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) -.PHONY: all-gtk-doc - -@ENABLE_GTK_DOC_TRUE@all-local: all-gtk-doc - -docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) - -$(REPORT_FILES): sgml-build.stamp - -setup-build.stamp: - -$(GTK_DOC_V_SETUP)if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ - files=`echo $(SETUP_FILES) $(DOC_MODULE).types`; \ - if test "x$$files" != "x" ; then \ - for file in $$files ; do \ - destdir=`dirname $(abs_builddir)/$$file`; \ - test -d "$$destdir" || mkdir -p "$$destdir"; \ - test -f $(abs_srcdir)/$$file && \ - cp -pf $(abs_srcdir)/$$file $(abs_builddir)/$$file || true; \ - done; \ - fi; \ - fi - $(AM_V_at)touch setup-build.stamp - -scan-build.stamp: setup-build.stamp $(HFILE_GLOB) $(CFILE_GLOB) - $(GTK_DOC_V_SCAN)_source_dir='' ; \ - for i in $(DOC_SOURCE_DIR) ; do \ - _source_dir="$${_source_dir} --source-dir=$$i" ; \ - done ; \ - gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES) - $(GTK_DOC_V_INTROSPECT)if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \ - scanobj_options=""; \ - gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$$?" = "0"; then \ - if test "x$(V)" = "x1"; then \ - scanobj_options="--verbose"; \ - fi; \ - fi; \ - CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \ - gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \ - else \ - for i in $(SCANOBJ_FILES) ; do \ - test -f $$i || touch $$i ; \ - done \ - fi - $(AM_V_at)touch scan-build.stamp - -$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp - @true - -sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) xml/gtkdocentities.ent - $(GTK_DOC_V_XML)_source_dir='' ; \ - for i in $(DOC_SOURCE_DIR) ; do \ - _source_dir="$${_source_dir} --source-dir=$$i" ; \ - done ; \ - gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS) - $(AM_V_at)touch sgml-build.stamp - -sgml.stamp: sgml-build.stamp - @true - -xml/gtkdocentities.ent: Makefile - $(GTK_DOC_V_XML)$(MKDIR_P) $(@D) && ( \ - echo ""; \ - echo ""; \ - echo ""; \ - echo ""; \ - echo ""; \ - echo ""; \ - echo ""; \ - ) > $@ - -html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files) - $(GTK_DOC_V_HTML)rm -rf html && mkdir html && \ - mkhtml_options=""; \ - gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$$?" = "0"; then \ - if test "x$(V)" = "x1"; then \ - mkhtml_options="$$mkhtml_options --verbose"; \ - fi; \ - fi; \ - gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \ - if test "$$?" = "0"; then \ - mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \ - fi; \ - cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) - -@test "x$(HTML_IMAGES)" = "x" || \ - for file in $(HTML_IMAGES) ; do \ - test -f $(abs_srcdir)/$$file && cp $(abs_srcdir)/$$file $(abs_builddir)/html; \ - test -f $(abs_builddir)/$$file && cp $(abs_builddir)/$$file $(abs_builddir)/html; \ - done; - $(GTK_DOC_V_XREF)gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS) - $(AM_V_at)touch html-build.stamp - -pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files) - $(GTK_DOC_V_PDF)rm -f $(DOC_MODULE).pdf && \ - mkpdf_options=""; \ - gtkdoc-mkpdf 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$$?" = "0"; then \ - if test "x$(V)" = "x1"; then \ - mkpdf_options="$$mkpdf_options --verbose"; \ - fi; \ - fi; \ - if test "x$(HTML_IMAGES)" != "x"; then \ - for img in $(HTML_IMAGES); do \ - part=`dirname $$img`; \ - echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \ - if test $$? != 0; then \ - mkpdf_options="$$mkpdf_options --imgdir=$$part"; \ - fi; \ - done; \ - fi; \ - gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS) - $(AM_V_at)touch pdf-build.stamp - -############## - -clean-local: - @rm -f *~ *.bak - @rm -rf .libs - @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-types" ; then \ - rm -f $(DOC_MODULE).types; \ - fi - @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-sections" ; then \ - rm -f $(DOC_MODULE)-sections.txt; \ - fi - -distclean-local: - @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \ - $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt - @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ - rm -f $(SETUP_FILES) $(DOC_MODULE).types; \ - fi - -maintainer-clean-local: - @rm -rf xml html - -install-data-local: - @installfiles=`echo $(builddir)/html/*`; \ - if test "$$installfiles" = '$(builddir)/html/*'; \ - then echo 1>&2 'Nothing to install' ; \ - else \ - if test -n "$(DOC_MODULE_VERSION)"; then \ - installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ - else \ - installdir="$(DESTDIR)$(TARGET_DIR)"; \ - fi; \ - $(mkinstalldirs) $${installdir} ; \ - for i in $$installfiles; do \ - echo ' $(INSTALL_DATA) '$$i ; \ - $(INSTALL_DATA) $$i $${installdir}; \ - done; \ - if test -n "$(DOC_MODULE_VERSION)"; then \ - mv -f $${installdir}/$(DOC_MODULE).devhelp2 \ - $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \ - fi; \ - $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \ - fi - -uninstall-local: - @if test -n "$(DOC_MODULE_VERSION)"; then \ - installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ - else \ - installdir="$(DESTDIR)$(TARGET_DIR)"; \ - fi; \ - rm -rf $${installdir} - -# -# Require gtk-doc when making dist -# -@HAVE_GTK_DOC_TRUE@dist-check-gtkdoc: docs -@HAVE_GTK_DOC_FALSE@dist-check-gtkdoc: -@HAVE_GTK_DOC_FALSE@ @echo "*** gtk-doc is needed to run 'make dist'. ***" -@HAVE_GTK_DOC_FALSE@ @echo "*** gtk-doc was not found when 'configure' ran. ***" -@HAVE_GTK_DOC_FALSE@ @echo "*** please install gtk-doc and rerun 'configure'. ***" -@HAVE_GTK_DOC_FALSE@ @false - -dist-hook: dist-check-gtkdoc all-gtk-doc dist-hook-local - @mkdir $(distdir)/html - @cp ./html/* $(distdir)/html - @-cp ./$(DOC_MODULE).pdf $(distdir)/ - @-cp ./$(DOC_MODULE).types $(distdir)/ - @-cp ./$(DOC_MODULE)-sections.txt $(distdir)/ - @cd $(distdir) && rm -f $(DISTCLEANFILES) - @$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html - -.PHONY : dist-hook-local docs -#TESTS = $(GTKDOC_CHECK) - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/doc/reference/meson.build eog-3.27.90/doc/reference/meson.build --- eog-3.26.2/doc/reference/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/doc/reference/meson.build 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,49 @@ +private_headers = [ + 'eog-application-service.h', + 'eog-close-confirmation-dialog.h', + 'eog-enum-types.h', + 'eog-image-private.h', + 'eog-image-jpeg.h', + 'eog-marshal.h', + 'eog-metadata-details.h', + 'eog-metadata-reader.h', + 'eog-metadata-reader-jpg.h', + 'eog-metadata-reader-png.h', + 'eog-metadata-sidebar.h', + 'eog-module.h', + 'eog-plugin-engine.h', + 'eog-preferences-dialog.h', + 'eog-print-image-setup.h', + 'eog-print-preview.h' +] + +if not have_exif + private_headers += 'eog-exif-util.h' +endif + +version_conf = configuration_data() +version_conf.set('VERSION', eog_version) + +version_xml = 'version.xml' + +configure_file( + input: version_xml + '.in', + output: version_xml, + configuration: version_conf +) + +doc_path = join_paths(eog_datadir, 'gtk-doc', 'html', meson.project_name()) + +gnome.gtkdoc( + meson.project_name(), + main_xml: meson.project_name() + '-docs.xml', + src_dir: src_inc, + dependencies: libeog_dep, + scan_args: [ + '--rebuild-types', + '--ignore-headers=' + ' '.join(private_headers), + ], + gobject_typesfile: meson.project_name() + '.types', + install: true, + install_dir: doc_path +) diff -Nru eog-3.26.2/doc/reference/version.xml eog-3.27.90/doc/reference/version.xml --- eog-3.26.2/doc/reference/version.xml 2017-11-08 19:36:03.000000000 +0000 +++ eog-3.27.90/doc/reference/version.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -3.26.2 diff -Nru eog-3.26.2/eog.doap eog-3.27.90/eog.doap --- eog-3.26.2/eog.doap 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/eog.doap 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,22 @@ + + Eye of GNOME Image Viewer + Browse and rotate images + The Eye of GNOME image viewer is the official image viewer for the GNOME Desktop environment. With it, you can view single image files, as well as large image collections. The Eye of GNOME supports a variety of image file formats. The GdkPixbuf library determines which file formats Eye of GNOME can load and save. + + + + + + + + + Felix Riemann + + friemann + + + diff -Nru eog-3.26.2/gtk-doc.make eog-3.27.90/gtk-doc.make --- eog-3.26.2/gtk-doc.make 2017-11-08 19:35:45.000000000 +0000 +++ eog-3.27.90/gtk-doc.make 1970-01-01 00:00:00.000000000 +0000 @@ -1,299 +0,0 @@ -# -*- mode: makefile -*- - -#################################### -# Everything below here is generic # -#################################### - -if GTK_DOC_USE_LIBTOOL -GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -GTKDOC_RUN = $(LIBTOOL) --mode=execute -else -GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -GTKDOC_RUN = -endif - -# We set GPATH here; this gives us semantics for GNU make -# which are more like other make's VPATH, when it comes to -# whether a source that is a target of one rule is then -# searched for in VPATH/GPATH. -# -GPATH = $(srcdir) - -TARGET_DIR=$(HTML_DIR)/$(DOC_MODULE) - -SETUP_FILES = \ - $(content_files) \ - $(expand_content_files) \ - $(DOC_MAIN_SGML_FILE) \ - $(DOC_MODULE)-sections.txt \ - $(DOC_MODULE)-overrides.txt - -EXTRA_DIST = \ - $(HTML_IMAGES) \ - $(SETUP_FILES) - -DOC_STAMPS=setup-build.stamp scan-build.stamp sgml-build.stamp \ - html-build.stamp pdf-build.stamp \ - sgml.stamp html.stamp pdf.stamp - -SCANOBJ_FILES = \ - $(DOC_MODULE).args \ - $(DOC_MODULE).hierarchy \ - $(DOC_MODULE).interfaces \ - $(DOC_MODULE).prerequisites \ - $(DOC_MODULE).signals - -REPORT_FILES = \ - $(DOC_MODULE)-undocumented.txt \ - $(DOC_MODULE)-undeclared.txt \ - $(DOC_MODULE)-unused.txt - -gtkdoc-check.test: Makefile - $(AM_V_GEN)echo "#!/bin/sh -e" > $@; \ - echo "$(GTKDOC_CHECK_PATH) || exit 1" >> $@; \ - chmod +x $@ - -CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) gtkdoc-check.test - -if GTK_DOC_BUILD_HTML -HTML_BUILD_STAMP=html-build.stamp -else -HTML_BUILD_STAMP= -endif -if GTK_DOC_BUILD_PDF -PDF_BUILD_STAMP=pdf-build.stamp -else -PDF_BUILD_STAMP= -endif - -all-gtk-doc: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) -.PHONY: all-gtk-doc - -if ENABLE_GTK_DOC -all-local: all-gtk-doc -endif - -docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) - -$(REPORT_FILES): sgml-build.stamp - -#### setup #### - -GTK_DOC_V_SETUP=$(GTK_DOC_V_SETUP_@AM_V@) -GTK_DOC_V_SETUP_=$(GTK_DOC_V_SETUP_@AM_DEFAULT_V@) -GTK_DOC_V_SETUP_0=@echo " DOC Preparing build"; - -setup-build.stamp: - -$(GTK_DOC_V_SETUP)if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ - files=`echo $(SETUP_FILES) $(DOC_MODULE).types`; \ - if test "x$$files" != "x" ; then \ - for file in $$files ; do \ - destdir=`dirname $(abs_builddir)/$$file`; \ - test -d "$$destdir" || mkdir -p "$$destdir"; \ - test -f $(abs_srcdir)/$$file && \ - cp -pf $(abs_srcdir)/$$file $(abs_builddir)/$$file || true; \ - done; \ - fi; \ - fi - $(AM_V_at)touch setup-build.stamp - -#### scan #### - -GTK_DOC_V_SCAN=$(GTK_DOC_V_SCAN_@AM_V@) -GTK_DOC_V_SCAN_=$(GTK_DOC_V_SCAN_@AM_DEFAULT_V@) -GTK_DOC_V_SCAN_0=@echo " DOC Scanning header files"; - -GTK_DOC_V_INTROSPECT=$(GTK_DOC_V_INTROSPECT_@AM_V@) -GTK_DOC_V_INTROSPECT_=$(GTK_DOC_V_INTROSPECT_@AM_DEFAULT_V@) -GTK_DOC_V_INTROSPECT_0=@echo " DOC Introspecting gobjects"; - -scan-build.stamp: setup-build.stamp $(HFILE_GLOB) $(CFILE_GLOB) - $(GTK_DOC_V_SCAN)_source_dir='' ; \ - for i in $(DOC_SOURCE_DIR) ; do \ - _source_dir="$${_source_dir} --source-dir=$$i" ; \ - done ; \ - gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES) - $(GTK_DOC_V_INTROSPECT)if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \ - scanobj_options=""; \ - gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$$?" = "0"; then \ - if test "x$(V)" = "x1"; then \ - scanobj_options="--verbose"; \ - fi; \ - fi; \ - CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \ - gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \ - else \ - for i in $(SCANOBJ_FILES) ; do \ - test -f $$i || touch $$i ; \ - done \ - fi - $(AM_V_at)touch scan-build.stamp - -$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp - @true - -#### xml #### - -GTK_DOC_V_XML=$(GTK_DOC_V_XML_@AM_V@) -GTK_DOC_V_XML_=$(GTK_DOC_V_XML_@AM_DEFAULT_V@) -GTK_DOC_V_XML_0=@echo " DOC Building XML"; - -sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) xml/gtkdocentities.ent - $(GTK_DOC_V_XML)_source_dir='' ; \ - for i in $(DOC_SOURCE_DIR) ; do \ - _source_dir="$${_source_dir} --source-dir=$$i" ; \ - done ; \ - gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS) - $(AM_V_at)touch sgml-build.stamp - -sgml.stamp: sgml-build.stamp - @true - -xml/gtkdocentities.ent: Makefile - $(GTK_DOC_V_XML)$(MKDIR_P) $(@D) && ( \ - echo ""; \ - echo ""; \ - echo ""; \ - echo ""; \ - echo ""; \ - echo ""; \ - echo ""; \ - ) > $@ - -#### html #### - -GTK_DOC_V_HTML=$(GTK_DOC_V_HTML_@AM_V@) -GTK_DOC_V_HTML_=$(GTK_DOC_V_HTML_@AM_DEFAULT_V@) -GTK_DOC_V_HTML_0=@echo " DOC Building HTML"; - -GTK_DOC_V_XREF=$(GTK_DOC_V_XREF_@AM_V@) -GTK_DOC_V_XREF_=$(GTK_DOC_V_XREF_@AM_DEFAULT_V@) -GTK_DOC_V_XREF_0=@echo " DOC Fixing cross-references"; - -html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files) - $(GTK_DOC_V_HTML)rm -rf html && mkdir html && \ - mkhtml_options=""; \ - gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$$?" = "0"; then \ - if test "x$(V)" = "x1"; then \ - mkhtml_options="$$mkhtml_options --verbose"; \ - fi; \ - fi; \ - gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \ - if test "$$?" = "0"; then \ - mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \ - fi; \ - cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) - -@test "x$(HTML_IMAGES)" = "x" || \ - for file in $(HTML_IMAGES) ; do \ - test -f $(abs_srcdir)/$$file && cp $(abs_srcdir)/$$file $(abs_builddir)/html; \ - test -f $(abs_builddir)/$$file && cp $(abs_builddir)/$$file $(abs_builddir)/html; \ - done; - $(GTK_DOC_V_XREF)gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS) - $(AM_V_at)touch html-build.stamp - -#### pdf #### - -GTK_DOC_V_PDF=$(GTK_DOC_V_PDF_@AM_V@) -GTK_DOC_V_PDF_=$(GTK_DOC_V_PDF_@AM_DEFAULT_V@) -GTK_DOC_V_PDF_0=@echo " DOC Building PDF"; - -pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files) - $(GTK_DOC_V_PDF)rm -f $(DOC_MODULE).pdf && \ - mkpdf_options=""; \ - gtkdoc-mkpdf 2>&1 --help | grep >/dev/null "\-\-verbose"; \ - if test "$$?" = "0"; then \ - if test "x$(V)" = "x1"; then \ - mkpdf_options="$$mkpdf_options --verbose"; \ - fi; \ - fi; \ - if test "x$(HTML_IMAGES)" != "x"; then \ - for img in $(HTML_IMAGES); do \ - part=`dirname $$img`; \ - echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \ - if test $$? != 0; then \ - mkpdf_options="$$mkpdf_options --imgdir=$$part"; \ - fi; \ - done; \ - fi; \ - gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS) - $(AM_V_at)touch pdf-build.stamp - -############## - -clean-local: - @rm -f *~ *.bak - @rm -rf .libs - @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-types" ; then \ - rm -f $(DOC_MODULE).types; \ - fi - @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-sections" ; then \ - rm -f $(DOC_MODULE)-sections.txt; \ - fi - -distclean-local: - @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \ - $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt - @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ - rm -f $(SETUP_FILES) $(DOC_MODULE).types; \ - fi - -maintainer-clean-local: - @rm -rf xml html - -install-data-local: - @installfiles=`echo $(builddir)/html/*`; \ - if test "$$installfiles" = '$(builddir)/html/*'; \ - then echo 1>&2 'Nothing to install' ; \ - else \ - if test -n "$(DOC_MODULE_VERSION)"; then \ - installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ - else \ - installdir="$(DESTDIR)$(TARGET_DIR)"; \ - fi; \ - $(mkinstalldirs) $${installdir} ; \ - for i in $$installfiles; do \ - echo ' $(INSTALL_DATA) '$$i ; \ - $(INSTALL_DATA) $$i $${installdir}; \ - done; \ - if test -n "$(DOC_MODULE_VERSION)"; then \ - mv -f $${installdir}/$(DOC_MODULE).devhelp2 \ - $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \ - fi; \ - $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \ - fi - -uninstall-local: - @if test -n "$(DOC_MODULE_VERSION)"; then \ - installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ - else \ - installdir="$(DESTDIR)$(TARGET_DIR)"; \ - fi; \ - rm -rf $${installdir} - -# -# Require gtk-doc when making dist -# -if HAVE_GTK_DOC -dist-check-gtkdoc: docs -else -dist-check-gtkdoc: - @echo "*** gtk-doc is needed to run 'make dist'. ***" - @echo "*** gtk-doc was not found when 'configure' ran. ***" - @echo "*** please install gtk-doc and rerun 'configure'. ***" - @false -endif - -dist-hook: dist-check-gtkdoc all-gtk-doc dist-hook-local - @mkdir $(distdir)/html - @cp ./html/* $(distdir)/html - @-cp ./$(DOC_MODULE).pdf $(distdir)/ - @-cp ./$(DOC_MODULE).types $(distdir)/ - @-cp ./$(DOC_MODULE)-sections.txt $(distdir)/ - @cd $(distdir) && rm -f $(DISTCLEANFILES) - @$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html - -.PHONY : dist-hook-local docs diff -Nru eog-3.26.2/help/ar/bug-filing.page eog-3.27.90/help/ar/bug-filing.page --- eog-3.26.2/help/ar/bug-filing.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/ar/commandline.page eog-3.27.90/help/ar/commandline.page --- eog-3.26.2/help/ar/commandline.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/ar/copy-paste.page eog-3.27.90/help/ar/copy-paste.page --- eog-3.26.2/help/ar/copy-paste.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/ar/default.page eog-3.27.90/help/ar/default.page --- eog-3.26.2/help/ar/default.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/ar/desktop-background.page eog-3.27.90/help/ar/desktop-background.page --- eog-3.26.2/help/ar/desktop-background.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/ar/develop.page eog-3.27.90/help/ar/develop.page --- eog-3.26.2/help/ar/develop.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/ar/documentation.page eog-3.27.90/help/ar/documentation.page --- eog-3.26.2/help/ar/documentation.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/ar/edit.page eog-3.27.90/help/ar/edit.page --- eog-3.26.2/help/ar/edit.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/ar/flip-rotate.page eog-3.27.90/help/ar/flip-rotate.page --- eog-3.26.2/help/ar/flip-rotate.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/ar/format-change.page eog-3.27.90/help/ar/format-change.page --- eog-3.26.2/help/ar/format-change.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/ar/formats-save.page eog-3.27.90/help/ar/formats-save.page --- eog-3.26.2/help/ar/formats-save.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/ar/formats-view.page eog-3.27.90/help/ar/formats-view.page --- eog-3.26.2/help/ar/formats-view.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - تحريكة

 -

BMP - Bitmap

 -

GIF - نسق تبادل الرسوميات

 -

ICO - أيقونة ويندوز

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - فرشاة رسم الحاسوب الشخصي

 -

PNG - رسوميات الشبكة المحمولة

 -

PNM - Portable Anymap from the PPM Toolkit

 -

RAS - رافع صن

 -

SVG - الرسوميات المتجهة القياسية

 -

TGA - تارغا

 -

TIFF - نسق ملف الصور الموسوم

 -

WBMP - خارطة ثنائية لاسلكية

 -

XBM - خارطة إكس الثنائية

 -

XPM - خارطة إكس البكسلية

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/ar/index.page eog-3.27.90/help/ar/index.page --- eog-3.26.2/help/ar/index.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/ar/introduction.page eog-3.27.90/help/ar/introduction.page --- eog-3.26.2/help/ar/introduction.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -مقدمة - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/ar/legal.xml eog-3.27.90/help/ar/legal.xml --- eog-3.26.2/help/ar/legal.xml 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/ar/license.page eog-3.27.90/help/ar/license.page --- eog-3.26.2/help/ar/license.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/ar/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/ar/open.page eog-3.27.90/help/ar/open.page --- eog-3.26.2/help/ar/open.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/ar/plugin-exif-digital.page eog-3.27.90/help/ar/plugin-exif-digital.page --- eog-3.26.2/help/ar/plugin-exif-digital.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/ar/plugin-fullscreen-background.page eog-3.27.90/help/ar/plugin-fullscreen-background.page --- eog-3.26.2/help/ar/plugin-fullscreen-background.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/ar/plugin-fullscreen-double-click.page eog-3.27.90/help/ar/plugin-fullscreen-double-click.page --- eog-3.26.2/help/ar/plugin-fullscreen-double-click.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/ar/plugin-picasa.page eog-3.27.90/help/ar/plugin-picasa.page --- eog-3.26.2/help/ar/plugin-picasa.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/ar/plugin-python-console.page eog-3.27.90/help/ar/plugin-python-console.page --- eog-3.26.2/help/ar/plugin-python-console.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/ar/plugin-send-by-mail.page eog-3.27.90/help/ar/plugin-send-by-mail.page --- eog-3.26.2/help/ar/plugin-send-by-mail.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/ar/plugin-slideshow-shuffle.page eog-3.27.90/help/ar/plugin-slideshow-shuffle.page --- eog-3.26.2/help/ar/plugin-slideshow-shuffle.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/ar/plugins.page eog-3.27.90/help/ar/plugins.page --- eog-3.26.2/help/ar/plugins.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/ar/plugin-zoom-width.page eog-3.27.90/help/ar/plugin-zoom-width.page --- eog-3.26.2/help/ar/plugin-zoom-width.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/ar/preferences.page eog-3.27.90/help/ar/preferences.page --- eog-3.26.2/help/ar/preferences.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -التفضيلات -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

يعرض أي أجزاء شفافة من الصورة على نمط شبكة.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/ar/print.page eog-3.27.90/help/ar/print.page --- eog-3.26.2/help/ar/print.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/ar/rename-multiple.page eog-3.27.90/help/ar/rename-multiple.page --- eog-3.26.2/help/ar/rename-multiple.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/ar/shortcuts.page eog-3.27.90/help/ar/shortcuts.page --- eog-3.26.2/help/ar/shortcuts.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/ar/slideshow.page eog-3.27.90/help/ar/slideshow.page --- eog-3.26.2/help/ar/slideshow.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -عرض الشرائح - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/ar/translate.page eog-3.27.90/help/ar/translate.page --- eog-3.26.2/help/ar/translate.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/ar/view.page eog-3.27.90/help/ar/view.page --- eog-3.26.2/help/ar/view.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/ar/zoom.page eog-3.27.90/help/ar/zoom.page --- eog-3.26.2/help/ar/zoom.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ar/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/C/l10n.txt eog-3.27.90/help/C/l10n.txt --- eog-3.26.2/help/C/l10n.txt 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/help/C/l10n.txt 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,73 @@ +Eye of GNOME Manual V2.7 + +------------------------ +SUMMARY OF CHANGES +------------------------ + +Created by: Pat Costello +Date: March 2002 +Manual version: 2.0 (placeholder files added to CVS by JFleck) + +Updated by: Pat Costello +Date: 08 May 2002 +Manual version: 2.0 +Summary of changes: +* First real release of manual + +Updated by: Irene Ryan +Date: 13 July 2002 +Manual version: 2.1 +Summary of changes: +* Updated to reflect UI changes + +Updated by: Irene Ryan +Date: 02 August 2002 +Manual version: 2.2 +Summary of changes: +* Updated manual following consistency review of all ORMs. + +Updated by: Irene Ryan +Date: 15 October 2002 +Manual version: 2.3 +Summary of changes: +* Updated to fix bugzilla # 91027 + +Updated by: Irene Ryan +Date: 27 January 2003 +Manual version: 2.4 +Summary of changes: +* Minor updates for the GNOME 2.2 release + +Updated by: Irene Ryan +Date: 04 September 2003 +Manual version: 2.5 +Summary of changes: +* Updated for GNOME 2.4 release, commented out a lot of sections that are + no longer relevant. These comments can be deleted in time when we are sure + that the developers are not putting back the functionality. + +Updated by: Breda McColgan +Date: 06 November 2003 +Manual version: 2.6 +Summary of changes: +* Updated for GNOME 2.4.2. +* Updated screenshot eog_start_window.png. +* Implemented QR comments from Pat Costello. + +Updated by: Breda McColgan +Date: February 2004 +Manual version: 2.7 +Summary of changes: +* Updated for GNOME 2.6. + +------------------------ +SCREENSHOT INSTRUCTIONS +------------------------ + +eog_start_window.png + +1. Start Eye of GNOME (Applications - Graphics - Image Viewer). +2. Ensure the window has focus. +3. Take a screenshot of the window. +4. Save the file to PNG format. + diff -Nru eog-3.26.2/help/C/shortcuts.page eog-3.27.90/help/C/shortcuts.page --- eog-3.26.2/help/C/shortcuts.page 2015-09-28 12:46:13.000000000 +0000 +++ eog-3.27.90/help/C/shortcuts.page 2018-02-12 20:46:58.000000000 +0000 @@ -77,7 +77,7 @@

View the image gallery

-

F9

+

CtrlF9

View fullscreen

@@ -140,7 +140,7 @@ - + diff -Nru eog-3.26.2/help/C/view.page eog-3.27.90/help/C/view.page --- eog-3.26.2/help/C/view.page 2017-08-10 19:43:22.000000000 +0000 +++ eog-3.27.90/help/C/view.page 2018-02-12 20:46:58.000000000 +0000 @@ -54,7 +54,7 @@

To show the image gallery, click Image - Gallery, or press F9.

+ Gallery, or press CtrlF9.

Click on a picture in the gallery to show it full-size.

@@ -63,7 +63,7 @@

To hide the gallery, click Image - Gallery again, or press F9.

+ Gallery again, or press CtrlF9.

 diff -Nru eog-3.26.2/help/ca/bug-filing.page eog-3.27.90/help/ca/bug-filing.page --- eog-3.26.2/help/ca/bug-filing.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Com informar d'un error associat al visualitzador d'imatges. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Informar d'un problema amb el visualitzador d'imatges -

El visualitzador d'imatges el mantenen una comunitat de voluntaris. S'us convida a participar-hi.

- -

Si teniu problemes amb el visualitzador d'imatges (per exemple, falla o té un comportament inesperat), o si creieu que falta una funció que creieu que hi hauria de ser, creeu un informe d'error fent clic a . Els desenvolupadors de programari utilitzen els informes d'error per fer un seguiment dels errors i solucionar-los.

-

Per poder-ho fer necessitareu un compte que us permetrà informar d'errors i fer-hi comentaris. També us caldrà registrar-vos per poder rebre les actualitzacions de l'estat del vostre error per correu electrònic. Si no teniu un compte, el podeu crear fent clic a l'enllaç New Account (compte nou).

-

Un cop tingueu el compte, inicieu la sessió i feu clic a File a bugCoreeog. Abans d'informar d'un error llegiu la guia de descripció d'errors i navegueu per la base de dades d'errors per veure si ja existeix.

-

Per informar d'un error trieu el component al menú Component. Si no esteu segur del component al qual pertany l'error trieu general.

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

S'assignarà un número identificador a l'informe i el seu estat s'anirà actualitzant a mesura que evolucioni la seva resolució. Solucionar un error pot portar temps i pot ser que els desenvolupadors us demanin informació addicional per comprendre l'origen del problema.

- diff -Nru eog-3.26.2/help/ca/commandline.page eog-3.27.90/help/ca/commandline.page --- eog-3.26.2/help/ca/commandline.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - Command Line - L'ordre eog pot obrir múltiples imatges en diferents modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -La línia d'ordres - -

-To start the Image Viewer from the -Terminal, type -eog.

-

Podeu obrir un fitxer específic introduint el nom de fitxer després de l'ordre eog:

-eog imatge.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Obertura d'una imatge a pantalla completa - eog --fullscreen imatge.jpeg -
- -
- Open image in a new instance - eog --new-instance imatge.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Imatges/ -
- diff -Nru eog-3.26.2/help/ca/copy-paste.page eog-3.27.90/help/ca/copy-paste.page --- eog-3.26.2/help/ca/copy-paste.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - - Com copiar/enganxar del visualitzador d'imatges a una altra aplicació. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copia i enganxament d'una imatge -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

La imatge s'ha copiat al porta-retalls i la podeu enganxar a un document del LibreOffice, a una imatge del GIMP o a qualsevol altra aplicació.

- - diff -Nru eog-3.26.2/help/ca/default.page eog-3.27.90/help/ca/default.page --- eog-3.26.2/help/ca/default.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Definiu el visualitzador d'imatges com l'aplicació per defecte per visualitzar imatges. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Obertura de les imatges al visualitzador d'imatges per defecte -

Si voleu que el visualitzador d'imatges sigui el programa per defecte que obri alguns tipus de fitxer d'imatge:

- - - -

Al navegador de fitxer, feu clic amb el botó secundari i escolliu Propietats.

- - -

Aneu a la pestanya Obre amb. Apareixerà una llista d'Aplicacions recomanades.

- - -

Seleccioneu el Visualitzador d'imatges i feu clic a Defineix com a per defecte.

-

Si el Visualitzador d'imatges no està a la llista d'Aplicacions recomanades feu clic a Mostra altres aplicacions. Seleccioneu el Visualitzador d'imatges a la llista i feu clic a Estableix com a per defecte.

- - -

Feu clic a Tanca.

- - - -

En el futur, quan feu doble clic a un fitxer del mateix tipus s'obrirà al visualitzador d'imatges.

- - diff -Nru eog-3.26.2/help/ca/desktop-background.page eog-3.27.90/help/ca/desktop-background.page --- eog-3.26.2/help/ca/desktop-background.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - Establiu la vostra imatge preferida com a fons d'escriptori. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Ús de la imatge actual com a fons d'escriptori -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

S'establirà la imatge que esteu visualitzant com a fons. A continuació us demanarà si voleu modificar l'aparença de la imatge utilitzant la finestra de preferències de fons. Si feu clic a Oculta el missatge desapareixerà.

- diff -Nru eog-3.26.2/help/ca/develop.page eog-3.27.90/help/ca/develop.page --- eog-3.26.2/help/ca/develop.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/ca/documentation.page eog-3.27.90/help/ca/documentation.page --- eog-3.26.2/help/ca/documentation.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/ca/edit.page eog-3.27.90/help/ca/edit.page --- eog-3.26.2/help/ca/edit.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edició o supressió d'una imatge - -
Edició d'una imatge -

El visualitzador d'imatges només es pot utilitzar per visualitzar imatges, no les pot editar. Per editar-les heu d'utilitzar una aplicació d'edició d'imatges com el GIMP. Per obrir una imatge per editar-la en una aplicació diferent:

- - -

Click Open With, -or right-click on the image.

- - -

Seleccioneu l'aplicació que voleu utilitzar per editar-la.

- - -

Una vegada finalitzada l'edició, deseu-la i tanqueu l'altra aplicació.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Supressió d'una imatge -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/ca/flip-rotate.page eog-3.27.90/help/ca/flip-rotate.page --- eog-3.26.2/help/ca/flip-rotate.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - Horitzontal/vertical, sentit horari/antihorari - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Inversió o gir d'imatges - -

Si les imatges estan mal orientades o al revés, les podeu invertir o girar perquè es visualitzin correctament.

- - -
-Inversió d'una imatge - -

Feu clic a Edita.

 -

Seleccioneu Inverteix horitzontalment o Inverteix verticalment.

 - -

If you want to keep the picture flipped in this way, click Save.

-

En cas contrari, no deseu la imatge i es tornarà a visualitzar en l'orientació original la pròxima vegada que l'obriu.

- - -
- -
-Gir d'una imatge - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

En cas contrari, no deseu la imatge i es tornarà a visualitzar en l'orientació original la pròxima vegada que l'obriu.

- - - -

You can also use the keyboard shortcuts:

- -

View side pane

CtrlF9

F9

View image properties
- - - - - - - - -

Gira cap a la dreta

CtrlR

Gira cap a l'esquerra

CtrlShiftR

- - - diff -Nru eog-3.26.2/help/ca/format-change.page eog-3.27.90/help/ca/format-change.page --- eog-3.26.2/help/ca/format-change.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,77 +0,0 @@ - - - - - - Podeu convertir les imatges d'un format a un altre. També ho podeu fer per a múltiples imatges alhora. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Les imatges es desen un format de fitxer específic, com el JPEG o el PNG. Podeu convertir d'un format de fitxer a un altre.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

Per exemple, per convertir un fitxer JPEG (.jpg) a un fitxer Bitmap (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Feu clic a Desa i creareu un fitxer nou amb el format nou. El fitxer antic (amb el format vell) es mantindrà a la mateixa ubicació i no se suprimirà.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Conversió de múltiples imatges a un format diferent -

Podeu convertir conjuntament múltiples imatges d'un format de fitxer a un altre. És molt útil si heu de convertir moltes imatges.

- - -

A la galeria d'imatges mantingueu premuda la tecla Ctrl i seleccioneu les imatges que voleu convertir una a una. Per seleccionar totes les imatges premeu CtrlA.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

Les imatges convertides es desaran, per defecte, a la carpeta actual. Si les voleu desar en alguna altra ubicació canvieu la Carpeta de destinació.

- - -

Seleccioneu el format de fitxer al qual voleu convertir les imatges a la llista desplegable a la dreta del quadre Format del nom de fitxer.

- - -

Feu clic a Desa.

- - -
- - diff -Nru eog-3.26.2/help/ca/formats-save.page eog-3.27.90/help/ca/formats-save.page --- eog-3.26.2/help/ca/formats-save.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - El JPEG, el PNG, el BMP i d'altres. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats compatibles pel desament d'imatges -

El visualitzador d'imatges pot desar imatges en els formats de fitxer següents:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

És possible que es pugui desar en altres formats d'imatge en funció de la configuració del sistema.

 - diff -Nru eog-3.26.2/help/ca/formats-view.page eog-3.27.90/help/ca/formats-view.page --- eog-3.26.2/help/ca/formats-view.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - - El visualitzador d'imatges pot visualitzar imatges de molts formats diferents, entre ells el PNG, el JPEG i el TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats d'imatge compatibles - -

El visualitzador d'imatges pot obrir imatges dels formats següents:

- -

ANI - Animation (animació)

 -

BMP - Bitmap (mapa de bits)

 -

GIF - Graphics Interchange Format (format d'intercanvi de gràfics)

 -

ICO - Windows Icon (icona del Windows)

 -

JPEG - Joint Photographic Experts Group (grup conjunt d'experts fotogràfics)

 -

PCX - PC Paintbrush (pinzell de dibuix per PC)

 -

PNG - Portable Network Graphics (gràfics de xarxa portables)

 -

PNM - Portable Anymap del joc d'eines PPM

 -

RAS - Sun Raster (imatge d'escombratge de Sun)

 -

SVG - Scalable Vector Graphics (gràfics de vectors escalables)

 -

TGA - Targa

 -

TIFF - Tagged Image File Format (format de fitxer d'etiquetat d'imatge)

 -

WBMP - Wireless Bitmap (mapa de bits sense fil)

 -

XBM - X Bitmap (mapa de bits d'X)

 -

XPM - X Pixmap (mapa de píxels d'X)

 - -

Si intenteu obrir una imatge d'un format no compatible us apareixerà l'error No s'ha pogut carregar la imatge «nom de la imatge».

- diff -Nru eog-3.26.2/help/ca/index.page eog-3.27.90/help/ca/index.page --- eog-3.26.2/help/ca/index.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Ajuda del visualitzador d'imatges Eye of GNOME. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- Visualització d'imatges -
- -
- Edició d'imatges -
- -
- Impressió d'imatges -
- -
- Addició de funcions addicionals - -
-
- Avançat -
- -
- Preguntes més freqüents -
- -
- Consells i suggeriments -
- -
- Implicar-se -
- diff -Nru eog-3.26.2/help/ca/introduction.page eog-3.27.90/help/ca/introduction.page --- eog-3.26.2/help/ca/introduction.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ - - - - - - Us donem la benvinguda al visualitzador d'imatges Eye of GNOME. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Introducció - -

L'Eye of GNOME és un visualitzador d'imatges. Us permet visualitzar imatges de gairebé qualsevol tipus. També gestiona col·leccions de moltes imatges i pot mostrar una projecció de diapositives. També podeu fer modificacions bàsiques de les imatges, per exemple girar-les o invertir-les o convertir-les a un format de fitxer diferent.

- - diff -Nru eog-3.26.2/help/ca/legal.xml eog-3.27.90/help/ca/legal.xml --- eog-3.26.2/help/ca/legal.xml 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/ca/license.page eog-3.27.90/help/ca/license.page --- eog-3.26.2/help/ca/license.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/ca/open.page eog-3.27.90/help/ca/open.page --- eog-3.26.2/help/ca/open.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Obertura d'imatges en una nova finestra. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Obrir una imatge - -

Les imatges s'haurien d'obrir automàticament al visualitzador d'imatges al fer-hi doble clic al navegador de fitxer. Si no fora el cas, pot ser que hàgiu de definir el visualitzador d'imatges com a aplicació per defecte de visualització d'imatges.

- -

Per defecte, s'obrirà una finestra nova del visualitzador d'imatges per cada imatge que feu doble clic, però, si voleu, podeu visualitzar múltiples imatges en una única finestra.

- -

També podeu obrir imatges des del visualitzador d'imatges:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Seleccioneu la imatge que voleu obrir i feu clic a Obre.

 - - - diff -Nru eog-3.26.2/help/ca/plugin-exif-digital.page eog-3.27.90/help/ca/plugin-exif-digital.page --- eog-3.26.2/help/ca/plugin-exif-digital.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,87 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Visualització de la informació d'una imatge - -

Les fotografies fetes amb una càmera digital es desen amb tot un seguit d'informació addicional incrustada, com per exemple la data que es van fer, els paràmetres d'exposició que es van utilitzar i, en alguns casos, fins i tot a on es va fer la fotografia.

- -

Aquest tema us mostra com accedir a aquesta informació.

- -
-Mostra la data a la barra d'estat - -

Podeu visualitzar la data que es va fer la fotografia a la barra d'estat de la part inferior de la finestra.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Dades detallades de l'EXIF -

La informació detallada que es desa a les fotografies digitals s'anomena Dades EXIF. La podeu visualitzar instal·lant un connector del visualitzador d'imatges.

- - - -

Per poder habilitar la funció heu d'instal·lar l'eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Visualització d'un mapa de localització de la fotografia -

Algunes càmeres poden adjuntar la informació de geolocalització (etiquetes geogràfiques) a les fotos digitals. Les etiquetes geogràfiques són coordenades GPS (latitud i longitud) del lloc on es va fer la fotografia.

- - - -

Per poder habilitar la funció heu d'instal·lar l'eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

El mapa mostrarà la ubicació de la imatge si adjunta la informació de geolocalització. Moltes càmeres no l'adjunten.

-
- - - diff -Nru eog-3.26.2/help/ca/plugin-fullscreen-background.page eog-3.27.90/help/ca/plugin-fullscreen-background.page --- eog-3.26.2/help/ca/plugin-fullscreen-background.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

Per poder habilitar la funció heu d'instal·lar l'eog-plugins.

- - diff -Nru eog-3.26.2/help/ca/plugin-fullscreen-double-click.page eog-3.27.90/help/ca/plugin-fullscreen-double-click.page --- eog-3.26.2/help/ca/plugin-fullscreen-double-click.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - Activeu el mode de pantalla completa fent doble clic a la imatge. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Pantalla completa amb un doble clic - - - -

Podeu fer que les imatges es mostrin en mode a pantalla completa quan els feu doble clic al visualitzador d'imatges.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Fent doble clic a una imatge commutareu entre els modes pantalla completa i normal (finestra).

- - diff -Nru eog-3.26.2/help/ca/plugin-picasa.page eog-3.27.90/help/ca/plugin-picasa.page --- eog-3.26.2/help/ca/plugin-picasa.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

Per poder habilitar la funció heu d'instal·lar l'eog-plugins.

- - diff -Nru eog-3.26.2/help/ca/plugin-python-console.page eog-3.27.90/help/ca/plugin-python-console.page --- eog-3.26.2/help/ca/plugin-python-console.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - La consola de Python es pot utilitzar per afegir funcions addicionals i executar scripts al visualitzador d'imatges. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Consola de Python - -

El visualitzador d'imatges disposa d'un sistema de connectors que utilitza el llenguatge Python. Si activeu la consola de Python podreu accedir directament a un intèrpret de Python des del visualitzador d'imatges. Podeu utilitzar-ho, per exemple, per desenvolupar scripts o programar la manipulació d'imatges.

- - - -

Per poder habilitar la funció heu d'instal·lar l'eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Seleccioneu Consola de Python i feu clic a Tanca.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/ca/plugin-send-by-mail.page eog-3.27.90/help/ca/plugin-send-by-mail.page --- eog-3.26.2/help/ca/plugin-send-by-mail.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - Envieu fàcilment imatges adjuntant-les a un correu electrònic. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Envia imatges per correu electrònic - -

Podeu afegir un botó que permet enviar imatges per correu electrònic.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

Per poder habilitar la funció heu d'instal·lar l'eog-plugins.

- - -

Per fer-ho funcionar cal que el programa de correu electrònic Evolution estigui configurat per connectar-se al vostre compte de correu electrònic.

- - - - - diff -Nru eog-3.26.2/help/ca/plugin-slideshow-shuffle.page eog-3.27.90/help/ca/plugin-slideshow-shuffle.page --- eog-3.26.2/help/ca/plugin-slideshow-shuffle.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - - La projecció de diapositives mostra les imatges ordenades aleatòriament. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Projecció de diapositives mesclades - -

Podeu fer que l'ordre de visualització d'imatges a l'iniciar una projecció de diapositives sigui aleatori.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

Per poder habilitar la funció heu d'instal·lar l'eog-plugins.

- - diff -Nru eog-3.26.2/help/ca/plugins.page eog-3.27.90/help/ca/plugins.page --- eog-3.26.2/help/ca/plugins.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,77 +0,0 @@ - - - - - - Instal·leu connectors per accedir a funcions addicionals. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Connectors - -

Podeu instal·lar el paquet eog-plugins per obtenir connectors addicionals del visualitzador d'imatges. Els connectors afegeixen funcions com les que es mostren a sota.

- - -

Podeu instal·lar el paquet eog-plugins utilitzant el gestor de paquets de la distribució de Linux que utilitzeu.

- - - -

install eog-plugins

- - - - -

L'eog-plugins inclou les funcions següents:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Visualitza l'EXIF: mostra els paràmetres de la càmera i els histogrames de les fotos digitals.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Mapa: mostra la geolocalització d'una foto digital a un mapa.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Consola de Python: una consola de Python per al visualitzador d'imatges.

- - -

Envia per correu electrònic: envia una imatge a un amic adjuntant-la a un correu electrònic.

- - -

Projecció de diapositives mesclades: mescla les imatges en el mode de projecció de diapositives.

- - -

Amplia per ajustar-se a l'amplada de la imatge: ajusta l'escala perquè l'amplada de la imatge s'ajusti a la finestra.

- - - - -

Podeu gestionar els connectors utilitzant la pestanya de Connectors de la finestra de preferències.

- - - diff -Nru eog-3.26.2/help/ca/plugin-zoom-width.page eog-3.27.90/help/ca/plugin-zoom-width.page --- eog-3.26.2/help/ca/plugin-zoom-width.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Ajusta el nivell d'ampliació per ajustar la imatge horitzontal de la imatge a la finestra. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Ampliació per ajustar l'amplada de la imatge - -

Si voleu que les imatges s'escalin per omplir tota l'amplada de la pantalla activeu el connector Amplia per ajustar-se a l'amplada de la imatge.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

Per afegir la funció heu de tenir instal·lat l'eog-plugins.

- - diff -Nru eog-3.26.2/help/ca/preferences.page eog-3.27.90/help/ca/preferences.page --- eog-3.26.2/help/ca/preferences.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,89 +0,0 @@ - - - - - - Visualització de la imatge, projecció de diapositives i connectors. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Preferències -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Preferències del visualitzador d'imatges - - - - Millores de la imatge -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

Si habiliteu l'Orientació automàtica, les imatges es giraran automàticament en funció de les metadades EXIF. Aquesta informació de la imatge l'afegeix automàticament una càmera digital i inclou detalls de l'orientació de la màquina quan es va fer la fotografia. Per exemple, a l'habilitar l'orientació automàtica, les fotos verticals es giren automàticament a la dreta. La rotació no es desa fins que deseu la imatge girada.

-

L'orientació automàtica no funciona a totes les imatges, només funcionarà per les fotografies fetes amb una càmera que desi les metadades d'orientació de l'EXIF.

- - - Parts transparents -

Seleccioneu una de les opcions següents per determinar com es mostren les parts transparents d'una imatge (si n'hi ha cap):

- - -

As check pattern:

-

Mostra les parts transparents de la imatge com un patró de quadrats.

- - -

As custom color:

-

Mostra les parts transparents de la imatge amb el color sòlid que heu indicat fent clic al botó de selecció de color.

- - -

As background:

-

Mostra les parts transparents de la imatge amb el color de Fons si s'ha seleccionat l'opció Com a color personalitzat de Fons. Si no, s'utilitza el color de fons per defecte.

- - - - -
- - -
-Preferències de la projecció de diapositives - -

Per personalitzar els paràmetres de la projecció de diapositives:

- - -

A Ampliació de la imatge podeu decidir si voleu que s'ampliïn les imatges que són més petites que la pantalla perquè s'hi ajustin.

- - -

A Seqüència podeu seleccionar quants segons (d'1 a 100) es mostrarà una imatge abans que es mostri la següent.

- - -

Si voleu que la projecció de diapositives es repeteixi contínuament escolliu Seqüència en bucle. Si no l'escolliu, la projecció de diapositives començarà a la imatge que hàgiu seleccionat i acabarà a l'última imatge de la carpeta.

- - -
- - -
-Preferències dels connectors - - - - -

Podeu seleccionar/desseleccionar qualsevol funció addicional que voleu activar o desactivar. A la imatge de l'esquerra es mostren els connectors per defecte disponibles.

- -

Potser us interessa instal·lar el paquet eog-plugins, que conté connectors amb funcions addicionals. A continuació, podreu activar els connectors addicionals com els que es mostren a la imatge de la dreta.

-
- - diff -Nru eog-3.26.2/help/ca/print.page eog-3.27.90/help/ca/print.page --- eog-3.26.2/help/ca/print.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Impressió d'imatges - -

Per imprimir la imatge que esteu visualitzant:

- - - -

Click Print….

- - -

A la pestanya General escolliu la impressora que voleu utilitzar i el nombre de còpies que voleu imprimir-ne.

- - -

Si aneu a la pestanya Paràmetres de la imatge podeu ajustar la Posició i la Mida de la imatge.

-

També podeu ajustar la posició de la imatge a la pàgina arrossegant-la en la previsualització.

- - -

Si utilitzeu paper fotogràfic d'alta qualitat, aneu a la pestanya Configuració de la pàgina i seleccioneu el Tipus de paper corresponent. Per tal d'obtenir la millor qualitat de foto, també hauríeu d'anar a la pestanya Qualitat de la imatge i escollir els paràmetres d'alta qualitat.

- - -

Feu clic a Imprimeix.

- - - -

Algunes de les pestanyes que s'han mencionat no es mostren en alguns models d'impressora. Això és deu a què els controladors de les impressores no permeten canviar els paràmetres. Per exemple, si no veieu la pestanya Qualitat de la imatge, segurament es deu a què els controladors de la impressora que s'utilitzen no admeten aquests paràmetres.

- - diff -Nru eog-3.26.2/help/ca/rename-multiple.page eog-3.27.90/help/ca/rename-multiple.page --- eog-3.26.2/help/ca/rename-multiple.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - - Canvia el nom i enumera automàticament lots d'imatges. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Canvi del nom de múltiples imatges a la vegada - -

Si voleu canviar el nom a moltes imatges perquè tinguin un format de nom enumerat i estàndard:

- - - -

Obriu la col·lecció d'imatges prement F9.

- - -

Seleccioneu totes les imatges que voleu canviar-ne el nom de la col·lecció d'imatges mantenint premuda la tecla Ctrl i fent clic a cada una d'elles.

-

Si les voleu seleccionar totes, premeu CtrlA.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

Per defecte les imatges que s'han canviat de nom es desen a la carpeta actual. Per desar-les en algun altre lloc canvieu la Carpeta de destinació.

- - -

Per escollir el format del nom de les imatges utilitzeu el quadre Format del nom del fitxer. La Previsualització del nom del fitxer mostrarà com seran els noms de fitxer. A la secció de teniu uns quants consells de com canviar el nom dels fitxers.

- - -

Assegureu-vos que l'opció del desplegable Format del nom del fitxer és com està, si no és que voleu convertir les imatges a un format de fitxer diferent.

- - -

Feu clic a Anomena i desa per canviar el nom de les imatges.

- - - - - -
- Selecció d'un format de nom de fitxer -

El nom de fitxer dels fitxers que se'ls canvia el nom es determina pel que poseu al quadre Format del nom del fitxer.

- - -

Si voleu mantenir el nom original del fitxer com a part del nom nou deixeu %f al quadre.

-

Per exemple, si introduïu paris_%f al quadre Format del nom del fitxer, els fitxers anomenats flor.jpg, casa.jpg i gat.jpg es canviaran per paris_flor.jpg, paris_casa.jpg i paris_gat.jpg.

- - -

Si afegiu %n les imatges s'enumeraran consecutivament, començant pel nombre de comptador que escolliu a Opcions.

-

Per exemple, si introduïu sol_%n al quadre Format del nom del fitxer, les imatges que s'anomenen flor.jpg, casa.jpg i gat.jpg es canviaran per sol_2.jpg, sol_1.jpg, i sol_3.jpg. (s'enumeren segons l'ordre alfabètic del nom de fitxer original).

- - -
- - diff -Nru eog-3.26.2/help/ca/shortcuts.page eog-3.27.90/help/ca/shortcuts.page --- eog-3.26.2/help/ca/shortcuts.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,156 +0,0 @@ - - - - - - Una llista de totes les tecles de drecera. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Tecles de drecera - -

És una llista de totes les dreceres de teclat que podeu utilitzar al visualitzador d'imatges.

- -
- Obertura, tancament, desat i impressió - - - - - - - - - - - - - - - - - - - - - - - - - -

Obertura d'un fitxer d'imatge

CtrlO

Desat de la imatge amb el mateix nom de fitxer

CtrlS

Desat d'una còpia de la imatge actual amb un nom de fitxer nou

ShiftCtrlS

Impressió de la imatge actual

CtrlP

Tancament de la finestra actual

CtrlW

Establiment la imatge com a fons de l'escriptori

CtrlF8

-
- -
- Visualització d'imatges - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Anar a la imatge anterior de la carpeta

Back space / Left

Anar a la imatge següent de la carpeta

Space bar / Right

Anar a la primera imatge de la carpeta

AltHome

Anar a l'última imatge de la carpeta

AltEnd

Selecció d'una imatge aleatòria de la carpeta

CtrlM

Visualització de la col·lecció d'imatges

F9

Visualització en pantalla completa

F11

Visualització la projecció de diapositives

F5

Mida real

Ctrl0 (Zero)

Millor ajust

F

Desplaçar-se per una imatge gran

Altarrow keys

-
- -
- Copia d'una imatge per enganxar-la a una altra aplicació - - - - - -

Copia

CtrlC

-
- -
- Ampliació i rotació - - - - - - - - - - - - - - - - - -

Amplia

+

Redueix

-

Gira en sentit horari

CtrlR

Gira en sentit antihorari

ShiftCtrlR

-
- -
- Altres - - - - - - - - - - - - - - - - - -

Visualització de la subfinestra lateral

CtrlF9

Visualització de les propietats de la imatge

AltReturn

Desfer

CtrlZ

Ajuda

F1

-
- diff -Nru eog-3.26.2/help/ca/slideshow.page eog-3.27.90/help/ca/slideshow.page --- eog-3.26.2/help/ca/slideshow.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Projecció de diapositives - -

Per visualitzar totes les imatges d'una carpeta en una projecció de diapositives:

- - - -

Obre una de les imatges de la carpeta.

- - -

Click Slideshow or press - F5.

-

S'iniciarà una projecció de diapositives a pantalla completa. Cada pocs segons es visualitzarà una imatge nova. Si voleu moure-us per la projecció més ràpidament o tornar a una imatge que ja s'ha visualitzat, podeu utilitzar les tecles de cursor Esquerra i Dreta per moure-us endavant i endarrere.

- - -

Per sortir del mode de projecció de diapositives premeu Esc o F5.

- - - -

Podeu canviar els paràmetres de configuració de la projecció de diapositives, per exemple, el temps de visualització de cada imatge. Per a més informació vegeu les preferències de la projecció de diapositives.

- - diff -Nru eog-3.26.2/help/ca/translate.page eog-3.27.90/help/ca/translate.page --- eog-3.26.2/help/ca/translate.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/ca/view.page eog-3.27.90/help/ca/view.page --- eog-3.26.2/help/ca/view.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ - - - - - - Per intercanviar les imatges premeu les tecles Esquerra i Dreta o visualitzeu-les totes utilitzant la galeria d'imatges. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -Visualització de totes les imatges d'una carpeta - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Navegació per totes les imatges d'una carpeta -

Si teniu una carpeta amb múltiples imatges podeu navegar per totes elles sense haver d'obrir-les individualment.

- - -

Obriu qualsevol de les imatges de la carpeta que voleu veure.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

Per tornar a la visualització normal premeu Esc o F11.

- - -
- - - - diff -Nru eog-3.26.2/help/ca/zoom.page eog-3.27.90/help/ca/zoom.page --- eog-3.26.2/help/ca/zoom.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/ca/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Ampliació i reducció - -

Podeu ampliar i reduir les imatges per visualitzar-ne més o menys a la pantalla. És molt útil si voleu visualitzar una imatge gran en la seva totalitat o si voleu inspeccionar-ne detalls específics.

- - - -

Podeu ampliar o reduir la imatge utilitzant la rodeta del ratolí. Desplaceu-la amunt per ampliar-la o avall per reduir-la.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Ampliació per ajustar-se a la finestra -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/cs/bug-filing.page eog-3.27.90/help/cs/bug-filing.page --- eog-3.26.2/help/cs/bug-filing.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Vyplňujte chybová hlášení pro prohlížeč obrázků. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Hlaste problémy s prohlížečem obrázků -

O prohlížeč obrázků se stará komunita dobrovolníků. Vaše případná účast bude vítána.

- -

Když se setkáte v prohlížeči obrázků s problémem (například, když se hroutí nebo se nechová podle očekávání) nebo když postrádáte nějakou funkci, o které si myslíte, že by v něm měla být, vyplňte prosím chybové hlášení kliknutím na odkaz . Chybová hlášení sledují vývojáři softwaru, kteří problém mohou napravit.

-

Abyste se mohli zapojit, musíte si vytvořit účet, díky kterému získáte přistup, můžete hlásit chyby a psát komentáře. Registraci potřebujete také k tomu, aby vám přicházely na e-mail informace o stavu vaší chyby. Jestli účet zatím nemáte, stačí pro vytvoření kliknout na odkaz Nový účet.

-

Když už účet máte, přihlaste se, klikněte na File a BugApplicationseog. Před nahlášením chyby si prosím přečtěte přiručku k hlášení chyb (odkaz je v angličtině) a podívejte se prosím, jestli stejnou chybu nenahlásil už někdo jiný.

-

Při vyplňování hlášení zvolte v nabídce Component příslušnou komponentu. Pokud si nejste jisti, ke které komponentě se chyba vztahuje, zvolte obecnou komponentu general.

-

V případě, že žádáte o novou funkčnost, zvolte v nabídce Severity položku enhancement. Vyplňte pole Summary a Description a klikněte na Submit Bug.

-

Vaše hlášení dostane přiděleno identifikační číslo a jak bude postupně řešeno, bude se měnit jeho stav. Může nějakou dobu trvat, než chyba bude opravena a vývojáři vás mohou požádat o další informace, které jim pomohou problém identifikovat.

- diff -Nru eog-3.26.2/help/cs/commandline.page eog-3.27.90/help/cs/commandline.page --- eog-3.26.2/help/cs/commandline.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - Příkazový řádek - Příkaz eog umí otevřít libovolný počet obrázků v různých režimech. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Příkazový řádek - -

Když chcete spustit prohlížeč obrázků z terminálu, napište eog.

-

Můžete určit konkrétní soubor zadáním názvu souboru za příkaz eog:

-eog obrázek.jpeg -

Můžete určit konkrétní složku zadání názvu složky za příkaz eog:

-eog složka -

Abyste viděli všechny obrázky ve složce naráz, můžete chtít použít procházení galerie obrázků.

- -
- Otevřít obrázek v režimu celé obrazovky - eog --fullscreen obrazek.jpeg -
- -
- Otevřít obrázek v nové instanci prohlížeče - eog --new-instance obrazek.jpeg -
-
- Otevřít složku v režimu promítání - eog --slide-show Obrázky/ -
- diff -Nru eog-3.26.2/help/cs/copy-paste.page eog-3.27.90/help/cs/copy-paste.page --- eog-3.26.2/help/cs/copy-paste.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - - - Kopírujte/vkládejte z prohlížeče obrázků do jiných aplikací. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak kopírovat a vkládat obrázky -

Pro zkopírování obrázku z prohlížeče obrázků do jiné aplikace klikněte na obrázek pravým tlačítkem a zvolte Kopírovat.

- -

Obrázek se zkopíruje do schránky, odkud jej můžete vložit do dokumentu v LibreOffice, obrázku v editoru Gimp nebo nějaké další aplikace.

- - diff -Nru eog-3.26.2/help/cs/default.page eog-3.27.90/help/cs/default.page --- eog-3.26.2/help/cs/default.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Udělejte si z prohlížeče obrázků výchozí aplikaci pro zobrazování obrázků. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak otevírat obrázky v prohlížeči obrázků jako výchozí -

Pokud chcete udělat z prohlížeče obrázků výchozí program, který otevírá určité typy souborů s obrázky:

- - - -

V aplikaci Soubory klikněte pravým tlačítkem na soubor s obrázkem a zvolte Vlastnosti.

- - -

Přejděte na kartu Otevřít pomocí. Objeví se seznam Doporučených aplikací.

- - -

Vyberte Prohlížeč obrázků a klikněte na Nastavit jako výchozí.

-

Pokud Prohlížeč obrázků není v Doporučených aplikacích uveden, klikněte na Zobrazit další aplikace. Vyberte jej v seznamu, který se objeví, a klikněte na Nastavit jako výchozí.

- - -

Klikněte na Zavřít.

- - - -

Až příště dvojitě kliknete na soubor stejného typu, otevře se v prohlížeči obrázků.

- - diff -Nru eog-3.26.2/help/cs/desktop-background.page eog-3.27.90/help/cs/desktop-background.page --- eog-3.26.2/help/cs/desktop-background.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ - - - - - - Nastavte si svůj oblíbený obrázek jako pozadí/tapetu pracovní plochy. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak z aktuálního obrázku udělat pozadí plochy -

Pokud chcete mít obrázek, který si právě prohlížíte, jako obrázek na pozadí pracovní plochy, klikněte na Nastavit jako tapetu.

- -

Tím se ihned změní pozadí na obrázek, který máte právě zobrazen. Poté budete dotázáni, jestli si přejete změnit vzhled obrázku pomocí okna s předvolbami pozadí. Po kliknutí na Skrýt zpráva zmizí.

- diff -Nru eog-3.26.2/help/cs/develop.page eog-3.27.90/help/cs/develop.page --- eog-3.26.2/help/cs/develop.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,22 +0,0 @@ - - - - - - Vylepšete prohlížeč obrázků - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Pomozte s vývojem -

Prohlížeč obrázků je vyvíjen a udržován komunitou dobrovolníků. Vaše případná účast bude vítána.

-

Jestli chcete pomoci s vývojem prohlížeče obrázků, můžete se s vývojáři kontaktovat na IRC nebo přes poštovní konferenci. Ke komunikaci se používá angličtina.

- - diff -Nru eog-3.26.2/help/cs/documentation.page eog-3.27.90/help/cs/documentation.page --- eog-3.26.2/help/cs/documentation.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,25 +0,0 @@ - - - - - Přidejte se k dokumentačnímu týmu. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Pomozte psát dokumentaci - -

O dokumentaci prohlížeče obrázků se stará komunitou dobrovolníků. Vaše případná účast bude vítána.

- -

Jestli chcete přispívat do Dokumentačního projektu, nebojte se nás kontaktovat na IRC nebo přes poštovní konferenci. Ke komunikaci se používá angličtina.

-

Užitečné informace obsahuje naše wikistránka.

- - - diff -Nru eog-3.26.2/help/cs/edit.page eog-3.27.90/help/cs/edit.page --- eog-3.26.2/help/cs/edit.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - Kliknutím na Otevřít pomocí můžete upravit obrázek v externím editoru obrázků. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Jak upravit nebo smazat obrázek - -
Úpravy obrázků -

Prohlížeč obrázků lze používat pouze k zobrazení obrázků, nejde je v něm upravovat. K úpravám musíte použít některý z editorů obrázků, jako třeba GIMP. Když chcete obrázek upravit v takovéto aplikaci:

- - -

Klikněte na Otevřít pomocínebo klikněte na obrázek pravým tlačítkem.

- - -

Vyberte aplikaci, kterou chcete použít k úpravě obrázku.

- - -

Až úpravy dokončíte, uložte je a použitou aplikaci zavřete.

- - -

Prohlížeč obrázků sám zjistí, že byl obrázek změněn a znovu jej načte.

- - -
- -
-Mazání obrázků -

Když chcete smazat obrázek, který už nadále nebudete potřebovat, klikněte na něj pravým tlačítkem a zvolte Přesunout do koše.

-
- - diff -Nru eog-3.26.2/help/cs/flip-rotate.page eog-3.27.90/help/cs/flip-rotate.page --- eog-3.26.2/help/cs/flip-rotate.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,61 +0,0 @@ - - - - - - Vodorovně/svisle, po směru/proti směru hodinových ručiček - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak obrázek otočit nebo překlopit - -

V případě, že je obrázek nesprávným způsobem otočen nebo převrácen, můžete to napravit, aby vypadal správně.

- - -
-Překlápění obrázku - -

Klikněte na Upravit.

 -

Vyberte buď Překlopit vodorovně nebo Překlopit svisle.

 - -

Pokud chcete, aby se provedené překlopené obrázku zachovalo, klikněte na Uložit.

-

V opačném připadě se obrázek neuloží a při příští otevření jej uvidíte opět v původním stavu.

- - -
- -
-Otáčení obrázku - -

Najeďte ukazatelem myši nad obrázek. V jeho dolní části se objeví dvě tlačítka se šipkami.

 -

Vyberte buď Otočit obrázek o 90 stupňů doleva nebo Otočit obrázek o 90 stupňů doprava.

 - -

Pokud chcete, aby se provedené otočení obrázku zachovalo, klikněte na Uložit.

-

V opačném připadě se obrázek neuloží a při příští otevření jej uvidíte opět v původním stavu.

- - - -

Můžete použít také klávesové zkratky:

- - - - - - - - - - -

Otočit po směru hodinových ručiček

CtrlR

Otočit proti směru hodinových ručiček

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/cs/format-change.page eog-3.27.90/help/cs/format-change.page --- eog-3.26.2/help/cs/format-change.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,70 +0,0 @@ - - - - - - Obrázky můžete převádět z jednoho formátu obrázků do druhého. Můžete to provádět i dávkově pro více obrázků naráz. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Jak převádět do jiného formátu souboru - -

Obrázky jsou ukládány v určitých formátech, příklady budiž JPEG a PNG. Z jednoho do druhého formátu je můžete převádět.

- -
- Převod jednoho obrázku do jiného souborového formátu - - -

Klikněte na Uložit jako… a objeví se okno Uložení obrázku.

- - -

V poli pro název změňte příponu souboru na tu, kterou používá souborový formát, do kterého chcete obrázek převést. Přípona souboru je část názvu souboru nacházející se za poslední tečkou.

-

Například při převodu souboru JPEG (.jpg) na soubor Bitmap (.bmp):

-

původní soubor: obrázek.jpg

-

nový soubor: obrázek.bmp

- - -

Klikněte na Uložit a nový soubor se uloží v novém formátu. Starý soubor (ve starém formátu) zůstane tam, kde byl, nemaže se.

- - - -

Prohlížeč souborů se snaží formát, ve kterém má obrázek uložit, určit na základě přípony souboru, kterou jste zadali. Pokud ji nerozpozná nebo nevíte, jaká má vlastně přípona být, klikněte na Podporované formáty obrázků v okně Uložení obrázku. Pak si můžete formát souboru vybrat v rozbaleném seznamu.

- -
- -
- Převod více obrázků do jiného souborového formátu -

Máte možnost převádět i několik obrázků z jednoho formátu souboru do druhého v jediném kroku. To se může hodit, když máte hodně obrázků, které potřebujete převést.

- - -

V galerii obrázků zmáčkněte a držte klávesu Ctrl a vybírejte jeden po druhém obrázky, které chcete převést. Případně můžete zmáčknutím CtrlA označit všechny.

- - -

Klikněte na Uložit jako…. Objeví se okno (jako na obrázku níže).

- - - -

Převedené obrázky budou standardně uloženy v aktuální složce. Pokud je chcete uložit jinam, změňte Cílovou složku.

- - -

V rozbalovacím seznamu napravo od Formát názvu souboru vyberte souborový formát, do které chcete obrázek převést.

- - -

Klikněte na Uložit.

- - -
- - diff -Nru eog-3.26.2/help/cs/formats-save.page eog-3.27.90/help/cs/formats-save.page --- eog-3.26.2/help/cs/formats-save.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP a další. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formáty podporované pro ukládání obrázků -

Prohlížeč obrázků umí obrázky ukládat v následujících formátech souboru:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

V závislosti na nastavení vašeho systému může být možné ukládat ještě další formáty obrázků.

 - diff -Nru eog-3.26.2/help/cs/formats-view.page eog-3.27.90/help/cs/formats-view.page --- eog-3.26.2/help/cs/formats-view.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - - Prohlížeč obrázků umí zobrazit obrázky v celé řadě formátů, včetně PNG, JPEG a TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Podporované formáty obrázků - -

Prohlížeč obrázků dokáže otevírat obrázky v následujících formátech:

- -

ANI – Animace

 -

BMP – Bitmapa

 -

GIF – Graphics Interchange Format

 -

ICO – Ikona z Windows

 -

JPEG – Joint Photographic Experts Group

 -

PCX – PC Paintbrush

 -

PNG – Portable Network Graphics

 -

PNM – Portable Anymap z PPM Toolkit

 -

RAS – Sun Raster

 -

SVG – Scalable Vector Graphics

 -

TGA – Targa

 -

TIFF – Tagged Image File Format

 -

WBMP – Wireless Bitmap

 -

XBM – X Bitmap

 -

XPM – X Pixmap

 - -

V případě, že zkusíte otevřít obrázek v nepodporovaném formátu, obdržíte chybové hlášení Nelze načíst obrázek „název obrázku“.

- diff -Nru eog-3.26.2/help/cs/index.page eog-3.27.90/help/cs/index.page --- eog-3.26.2/help/cs/index.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - Nápověda k prohlížeči obrázků Eye of GNOME - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Prohlížeč obrázků Eye of GNOME - Prohlížeč obrázků Eye of GNOME - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> Prohlížeč obrázků Eye of GNOME -
- Zobrazení obrázků -
- -
- Úpravy obrázků -
- -
- Tisk obrázků -
- -
- Doplnění dalších funkcí - -
-
- Pokročilé -
- -
- Časté dotazy a odpovědi -
- -
- Tipy a triky -
- -
- Zapojte se -
- diff -Nru eog-3.26.2/help/cs/introduction.page eog-3.27.90/help/cs/introduction.page --- eog-3.26.2/help/cs/introduction.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ - - - - - - Vítejte v prohlížeči obrázků Eye of GNOME. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Úvod - -

Eye of GNOME je prohlížeč obrázků. Pomocí něj si můžete zobrazit většinu typů obrázků. Umí také pracovat s rozsáhlými sbírkami obrázků a zobrazit je v podobě promítání snímků. V obrázcích můžete dělat některé základní úpravy, jako otáčení nebo překlápění nebo je převádět do jiných souborových formátů.

- - diff -Nru eog-3.26.2/help/cs/legal.xml eog-3.27.90/help/cs/legal.xml --- eog-3.26.2/help/cs/legal.xml 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Toto dílo je licencována pod Creative Commons Attribution-Share Alike 3.0 United States License.

-

Jako speciální výjimků vám držitel autorských práv uděluje oprávnění kopírovat, upravovat a šířit ukázky kódu obsažené v tomto dokumentu a to bez dalších omezení za podmínek, které si sami zvolíte.

- diff -Nru eog-3.26.2/help/cs/license.page eog-3.27.90/help/cs/license.page --- eog-3.26.2/help/cs/license.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - - Právní informace. - - - Licence -

Tato práce je šířena pod licencí CreativeCommons Attribution-Share Alike 3.0 Unported license.

-

Můžete volně:

- - - <em>Sdílet</em> -

Kopírovat, šířit a rozesílat dílo.

- - - <em>Měnit</em> -

Přizpůsobovat dílo.

- - -

Za následujících podmínek:

- - - <em>Označení</em> -

Musíte dílo označit v souladu s požadavky autora nebo licence (ale ne žádným způsobem, který předpokládá, že podporují vás nebo vaše použití díla).

- - - <em>Stejné sdílení</em> -

Pokud dílo změníte, převedete nebo na něm založíte jiné, můžete výsledek této práce šířit pouze pod stejnou, podobnou nebo kompatibilní licencí.

- - -

Text licence v plném znění najdete na webových stránkách CreativeCommons nebo si přečtěte výtah dokumentu pro neprávníky.

- diff -Nru eog-3.26.2/help/cs/open.page eog-3.27.90/help/cs/open.page --- eog-3.26.2/help/cs/open.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - Obrázky otevřené v novém okně. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak otevřít obrázek - -

Obrázky by se měly automaticky otevírat v prohlížeči obrázků, když dvojitě kliknete na soubor s obrázkem ve správci souborů. Pokud se tak neděje, možná budete muset nastavit prohlížeč obrázků jako výchozí aplikaci pro zobrazování obrázků.

- -

Každý obrázek, na který dvojitě kliknete, se standardně otevře v novém okně prohlížeče souborů, ale když budete chtít, můžete si v jednom okně zobrazit více obrázků.

- -

Obrázky můžete také otevřít přímo z prohlížeče obrázků:

- -

Klikněte na Otevřít… (nebo zmáčkněte CtrlO). Objeví se okno Otevírání obrázku.

 -

Vyberte obrázek, který chcete otevřít a klikněte na Otevřít.

 - - - diff -Nru eog-3.26.2/help/cs/plugin-exif-digital.page eog-3.27.90/help/cs/plugin-exif-digital.page --- eog-3.26.2/help/cs/plugin-exif-digital.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,75 +0,0 @@ - - - - - - Zobrazte si informace, jako nastavení fotoaparátu a histogram nebo datum a místo pořízení. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak zobrazit podrobné informace o obrázku - -

Obrázky pořízené digitálním fotoaparátem v sobě uchovávají vložené doplňující informace, jako je datum pořízení, nastavení expozice použité fotoaparátem a někdy i místo, kde byly pořízeny.

- -

Zde se dozvíte, jak se k těmto informacím dostat.

- -
-Zobrazení data ve stavové liště - -

Můžete si nechat zobrazovat datum, kdy byl obrázek pořízen, na stavové liště v dolní části okna.

-

Pokud to chcete, otevřete nabídku aplikace na horní liště, klikněte na Předvolby a přejděte na kartu Zásuvné moduly. Tam zaškrtněte Datum ve stavové liště.

-
- -
- Podrobné údaje Exif -

Podrobné informace uchované spolu s digitální fotografií se nazývají data Exif. Můžete si je zobrazit, když si do prohlížeče obrázků doinstalujete zásuvný modul.

- - - -

Aby šla tato funkce vůbec zapnout, musíte mít nainstalován balíček eog-plugins.

- - -

Až jej máte nainstalovaný, otevřete nabídku aplikace na horní liště a klikněte na Předvolby. Pak zaškrtněte Zobrazení informací Exif na kartě Zásuvné moduly a dialogové okno zavřete.

- - -

Aby se vám informace o nastavení fotoaparátu při pořízení fotky zobrazily, zapněte Postranní panel. Abyste viděli i histogram vyvážení barev a světel/stínů v obrázku, vyberte v zásuvných modulech Zobrazení informací Exif a klikněte na Předvolby. V části Histogram zaškrtněte histogramy, které chcete zobrazovat.

- - -

Údaje o nastavení fotoaparátu při pořízení snímku můžete mít zobrazené i na stavové liště. Vyberte Zobrazení informací Exifi v Zásuvných modulech a klikněte na Předvolby. Zaškrtněte Zobrazit nastavení fotoaparátu ve stavové liště.

- - -
- -
- Zobrazení původu fotografie na mapě -

Některé fotoaparáty umí do digitální fotografie přidat i geolokační údaje (tzv. geotags). Jedná se obvykle o souřadnice z GPS (zeměpisná šířka a délka) pro místo, kde byla fotografie pořízena.

- - - -

Aby šla tato funkce vůbec zapnout, musíte mít nainstalován balíček eog-plugins.

- - -

Až jej máte nainstalovaný, otevřete nabídku aplikace na horní liště, klikněte na Předvolby a přejděte na kartu Zásuvné moduly. Pak zaškrtněte Mapa a dialogové okno zavřete.

- - -

Pro zobrazení mapy povolte Postranní panel.

- - -

Mapa vám zobrazí místo, kde byl obrázek pořízen, jen v případě, že jsou k fotografii geolokační informace připojené. Řada fotoaparátů ale tyto informace získávat neumí.

-
- - - diff -Nru eog-3.26.2/help/cs/plugin-fullscreen-background.page eog-3.27.90/help/cs/plugin-fullscreen-background.page --- eog-3.26.2/help/cs/plugin-fullscreen-background.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Změňte si barvu pozadí pro režim celé obrazovky. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak změnit barvu pozadí celé obrazovky - -

Jestli chcete, můžete si změnit barvu pozadí v režimu celé obrazovky.

- -

Uděláte to tak, že otevřete nabídku aplikace na horní liště, kliknete na Předvolby a přejdete na kartu Zásuvné moduly. Pak zaškrtnete Pozadí celé obrazovky a klikněte na Předvolby. Zvolte si barvu, které chcete v režimu celé obrazovky a dialogové okno zavřete.

- -

Až nyní budete v režimu celé obrazovky, bude mít pozadí právě tu vybranou barvu.

- -

Aby šla tato funkce vůbec zapnout, musíte mít nainstalován balíček eog-plugins.

- - diff -Nru eog-3.26.2/help/cs/plugin-fullscreen-double-click.page eog-3.27.90/help/cs/plugin-fullscreen-double-click.page --- eog-3.26.2/help/cs/plugin-fullscreen-double-click.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Aktivujte si režim celé obrazovky dvojitým kliknutím na obrázek. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Celá obrazovka dvojklikem - - - -

Jestli chcete, můžete si nastavit, aby se obrázek po dvojitém kliknutí zobrazil v režimu celé obrazovky.

- -

Uděláte to tak, že otevřete nabídku aplikace na horní liště, kliknete na Předvolby a přejdete na kartu Zásuvné moduly. Pak zaškrtnete Celá obrazovka dvojklikem a zavřete dialogové okno.

- -

Kdykoliv nyní dvojitě kliknete na obrázek, přepne se mezi režimem celé obrazovky a normálním režimem (v okně).

- - diff -Nru eog-3.26.2/help/cs/plugin-picasa.page eog-3.27.90/help/cs/plugin-picasa.page --- eog-3.26.2/help/cs/plugin-picasa.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Odesílejte obrázky na PicasaWeb jednoduše přímo z Prohlížeče obrázků. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak odeslat fotky na <app>PicasaWeb</app> - -

PicasaWeb je služba, která umožňuje sdílet fotoalba s ostatními lidmi. Můžete si přidat tlačítko, které poskytne pohodlný způsob, jak obrázky odesílat na PicasaWeb.

- -

Uděláte to tak, že otevřete nabídku aplikace na horní liště, kliknete na Předvolby, přejdete na kartu Zásuvné moduly a zaškrtnete Nahrávání na PicasaWeb.

-

Tím získáte položku nabídky Nahrát na PicasaWeb, která vám usnadní práci.

- -

Aby šla tato funkce vůbec zapnout, musíte mít nainstalován balíček eog-plugins.

- - diff -Nru eog-3.26.2/help/cs/plugin-python-console.page eog-3.27.90/help/cs/plugin-python-console.page --- eog-3.26.2/help/cs/plugin-python-console.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Konzolu jazyka Python můžete použít k přidání doplňujících funkcí a ke spouštění skriptů v prohlížeči obrázků. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Konzola jazyka Python - -

Prohlížeč obrázků má systém zásuvných modulů, který využívá skriptovacího jazyka Python. Když aktivujete Konzolu jazyka Python, můžete získat přímý přístup k interpretu jazyka Python v rámci prohlížeče obrázků, čehož lze využít například k psaní skriptů nebo k programové manipulaci s obrázky.

- - - -

Aby šla tato funkce vůbec zapnout, musíte mít nainstalován balíček eog-plugins.

- - -

Až jej máte nainstalovaný, otevřete nabídku aplikace na horní liště, klikněte na Předvolby a přejděte na kartu Zásuvné moduly.

- - -

Zaškrtněte Konzola jazyka Python a klikněte na Zavřít.

- - -

Kliknutím na Konzola jazyka Python si konzolu zobrazíte.

- - - - diff -Nru eog-3.26.2/help/cs/plugin-send-by-mail.page eog-3.27.90/help/cs/plugin-send-by-mail.page --- eog-3.26.2/help/cs/plugin-send-by-mail.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Posílejte obrázky jednoduše přiložením k novému e-mailu. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak poslat obrázky e-mailem - -

Můžete si přidat tlačítko, které poskytne pohodlný způsob, jak posílat obrázky ostatním lidem e-mailem.

- -

Uděláte to tak, že otevřete nabídku aplikace, kliknete na Předvolby a přejdete na kartu Zásuvné moduly. Pak zaškrtněte Poslat e-mailem a klikněte na Zavřít. Tím získáte v nabídce položku Poslat e-mailem.

- -

Aby šla tato funkce vůbec zapnout, musíte mít nainstalován balíček eog-plugins.

- - -

Také musíte mít správně nastaveného poštovního klienta Evolution pro svůj poštovní účet.

- - - - - diff -Nru eog-3.26.2/help/cs/plugin-slideshow-shuffle.page eog-3.27.90/help/cs/plugin-slideshow-shuffle.page --- eog-3.26.2/help/cs/plugin-slideshow-shuffle.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - - Při promítání snímků si zobrazujte fotky v náhodném pořadí. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak promítat snímky náhodně - -

Můžete si nastavit, aby se při promítání snímků ukazovaly obrázky v náhodném pořadí.

- -

Pokud tak chcete učinit, otevřete nabídku aplikace na horní liště, klikněte na Předvolby a přejděte na kartu Zásuvné moduly. Pak zaškrtněte Náhodné promítání snímků a zavřete dialogové okno.

- -

Aby šla tato funkce vůbec zapnout, musíte mít nainstalován balíček eog-plugins.

- - diff -Nru eog-3.26.2/help/cs/plugins.page eog-3.27.90/help/cs/plugins.page --- eog-3.26.2/help/cs/plugins.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,76 +0,0 @@ - - - - - - Nainstalováním zásuvným modulům získáte přístup k rozšiřujícím funkcím. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zásuvné moduly - -

Můžete si nainstalovat balíček eog-plugins, abyste si do prohlížeče obrázků doplnili další zásuvné moduly. Zásuvné moduly přidávají další funkce, jako jsou ty uvedené v seznamu níže.

- - -

Balíček eog-plugins může nainstalovat pomocí správce balíčků své linuxové distribuce.

- - - -

instalovat balíček eog-plugins

- - - - -

Součástí balíčku eog-plugins jsou následující funkce:

- - - -

Datum ve stavové liště: Zobrazuje ve stavové liště okna datum vytvoření obrázku.

- - -

Zobrazení informací Exif: Zobrazuje pro fotografie nastavení fotoaparátu a histogramy.

- - -

Pozadí celé obrazovky: Umožňuje změnit pozadí v režimu celé obrazovky.

- - -

Celá obrazovka dvojklikem: Aktivujte režim celé obrazovky pomocí dvojitého kliknutí.

- - -

Mapa: Zobrazuje na mapě geolokační informace o fotografii.

- - -

Odesílání na PicasaWeb: Odesílejte své fotografie na PicasaWeb.

- - -

Konzola jazyka Python: Konzola pro skriptovaní v jazyce Python pro prohlížeč obrázků.

- - -

Poslat e-mailem: Posílejte přátelům obrázky přiložené v e-mailu.

- - -

Náhodné promítání snímků: Promíchá obrázky v režimu promítání snímků.

- - -

Přizpůsobit přiblížení šířce obrázku: Přizpůsobí přiblížení tak, aby obrázek na šířku využil celé okno.

- - - - -

Zásuvné moduly můžete spravovat na kartě Zásuvné moduly v okně s předvolbami.

- - - diff -Nru eog-3.26.2/help/cs/plugin-zoom-width.page eog-3.27.90/help/cs/plugin-zoom-width.page --- eog-3.26.2/help/cs/plugin-zoom-width.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Přizpůsobte si velikost obrázku tak, aby plně využil šířku okna. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak obrázek přiblížit s přizpůsobením šířce - -

Jestli chcete, aby se obrázky roztahovaly takovým způsobem, aby plně využily šířku okna, aktivujte si zásuvný modul Přizpůsobit přiblížení šířce obrázku.

- -

Uděláte to tak, že otevřete nabídku aplikace na horní liště, kliknete na Předvolby a přejdete na kartu Zásuvné moduly. Pak zaškrtnete Přizpůsobit přiblížení šířce obrázku a zavřete dialogové okno.

- -

Aby mohla tato funkcionalita vůbec fungovat, můsíte mít nainstalován balíček eog-plugins.

- - diff -Nru eog-3.26.2/help/cs/preferences.page eog-3.27.90/help/cs/preferences.page --- eog-3.26.2/help/cs/preferences.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,85 +0,0 @@ - - - - - - Zobrazení obrázku, promítání snímků a zásuvné moduly. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Předvolby -

V tomto tématu se dozvíte o všech nastaveních, která můžete v prohlížeči obrázků změnit. Změny předvoleb začněte otevřením nabídky aplikace na horní liště a kliknutím na Předvolby.

- - - -
-Předvolby zobrazení obrázků - - - - Vylepšení obrázku -

Pokud chcete, aby se při přiblížení a oddálení obrázky vyhlazovaly, zaškrtněte Vyhlazovat obrázky při přiblížení a Vyhlazovat obrázky při oddálení. Díky tomu budou obrázky v nízkém rozlišení (kostičkované) vypadat lépe pomocí technologie vyhlazovaní zubatých hran.

-

Když zapnete Automatické otočení, budou obrázky automaticky otočeny na základě metadat Exif. Tyto informaci o obrázku automaticky vkládá digitální fotoaparát a jedna z nich může právě být, v jaké poloze byl v okamžiku pořízení snímku fotoaparát držen. Takže například portrétní fotografie se při zapnutí této volby automaticky otočí správně na výšku. Obrázek nebude v novém natočení uložen, ledaže jej uložíte otočený ručně.

-

Automatické otočení nefunguje u všech obrázků. Podmínkou je, aby byly pořízeny fotoaparátem, který ukládá do metadat Exif informaci o otočení.

- - - Průhledné části -

Z jedné z následujících možností si vyberte, jak se mají zobrazovat případné průhledné části obrázku:

- - -

Jako vzor čtverců:

-

Zobrazí průhledné části obrázku v podobě kostkovaného vzoru.

- - -

Jako vlastní barvu:

-

Zobrazí průhledné části obrázku v jedné plné barvě, kterou si zvolíte kliknutím na tlačítko pro výběr barvy.

- - -

Jako pozadí:

-

Zobrazí průhledné části obrázku v barvě Pozadí v případě, že je zaškrtnuto Jako vlastní barvu v Pozadí. Jinak se použije výchozí barva pozadí.

- - - - -
- - -
-Předvolby promítání snímků - -

Pro vlastní nastavení promítání snímků:

- - -

V Přiblížení obrázku můžete zvolit, jestli chcete, aby byly obrázky, které jsou menší než obrazovka, roztaženy na rozměry obrazovky.

- - -

V Posloupnost můžete zvolit, na kolik sekund (v rozmezí 1 až 100) má být každý obrázek zobrazen, než naskočí další.

- - -

Jestli chcete, aby se promítání plynule opakovalo pořád dokola, zaškrtněte Opakovat posloupnost ve smyčce.

- - -
- - -
-Předvolby zásuvných modulů - - - - -

Zde můžete zapnout/vypnout doplňující funkce, které si přejete mít nebo nemít aktivní. Obrázek na levé straně ukazuje zásuvné moduly, které jsou dostupné ve výchozím stavu.

- -

Možná si budete přát doinstalovat balíček eog-plugins, který obsahuje zásuvné moduly poskytující řadu rozšiřujících funkcí. Po jeho nainstalování budete mít možnost aktivovat další zásuvné moduly, tak jak můžete vidět na obrázku vpravo.

-
- - diff -Nru eog-3.26.2/help/cs/print.page eog-3.27.90/help/cs/print.page --- eog-3.26.2/help/cs/print.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Klikněte na Tisk… a na kartách si upravte nastavení tisku. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak vytisknout obrázek - -

Když chcete vytisknout obrázek, který si právě prohlížíte:

- - - -

Klikněte na Tisk…

- - -

Na kartě Obecné vyberte tiskárnu, kterou chcete použít a počet kopií, které chcete vytisknout.

- - -

Když se přepnete na kartu Nastavení obrázku, můžete si přizpůsobit Polohu a Velikost obrázku.

-

Určit polohu obrázku na stránce lze také přesouváním obrázku pomocí myši v náhledu.

- - -

Pokud používáte vysoce kvalitní fotopapír, přejděte na kartu Vzhled stránky a vyberte správný Typ papíru. Můžete také použít kartu Kvalita obrazu a zvolit nastavení vysoké kvality, takže dostanete nejlepší možnou fotokvalitu.

- - -

Klikněte na Tisk.

- - - -

Vemte na vědomí, že některé z karet zmíněných výše, nemusí být pro některé modely tiskáren zobrazeny. Je to z toho důvodu, že ovladače tiskárny pro tyto tiskárny neumožňují některá nastavení měnit. Například nemusíte vidět kartu Kvalita obrazu, což pravděpodobně znamená, že ovladač použité tiskárny nepodporuje tato nastavení.

- - diff -Nru eog-3.26.2/help/cs/rename-multiple.page eog-3.27.90/help/cs/rename-multiple.page --- eog-3.26.2/help/cs/rename-multiple.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,66 +0,0 @@ - - - - - - - Automaticky přejmenujte a očíslujte dávku obrázků. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak přejmenovat více obrázků naráz - -

Pokud máte hodně obrázků, možná je budete chtít přejmenovat tak, aby měly jednotné číslované názvy:

- - - -

Otevřete galerii obrázků zmáčknutím F9.

- - -

Pomocí podržení Ctrl a klikání na jeden obrázek po druhém vyberte v galerii obrázků všechny obrázky, které chcete přejmenovat.

-

Případně můžete označit všechny obrázky zmáčknutím CtrlA.

- - -

Klikněte na Uložit jako… Objeví se okno s několika volbami pro název souboru (na obrázku níže můžete vidět, jak toto okno vypadá).

- - -

Přejmenované obrázky se standardně uloží v aktuální složce. Jestli je chcete uložit jinam, změňte Cílovou složku.

- - -

Použijte pole Formát názvu souboru k volbě pojmenování obrázků. V Náhledu názvu souboru uvidíte, jak by nový název souboru vypadal. Viz oddíl níže s podrobným popisem, jak zvolit název pro přejmenování.

- - -

Ujistěte se, že v rozbalovacím seznamu vedle Formátu názvu souboru je vybráno beze změny, ledaže chcete převést obrázek do jiného formátu souboru.

- - -

Klikěte na Uložit jako a obrázky se přejmenují.

- - - - - -
- Volba formátu názvu souboru -

Názvy přejmenovaných souborů jsou určeny tím, co je zadáno v poli Formát názvu souboru.

- - -

Součástí nového názvu může být i název původní, stačí v poli nechat %f.

-

Například, když do pole Formát názvu souboru zadáte paříž_%f, budou obrázky s názvy květina.jpg, dům.jpg a kočka.jpg přejmenovány na paříž_květina.jpg, paříž_dům.jpg a paříž_kočka.jpg.

- - -

Přidáním %n budou obrázky posloupně číslovány, počínaje číslem, které určíte v části Možnosti.

-

Napříkad, když do pole Formát názvu souboru zadáte letní_den_%n, budou obrázky s názvy květina.jpg, dům.jpg a kočka.jpg přejmenovány na letní_den_2.jpg, letní_den_3.jpg a letní_den_1.jpg. (Číslovány budou v abecedním pořadí podle původního názvu.)

- - -
- - diff -Nru eog-3.26.2/help/cs/shortcuts.page eog-3.27.90/help/cs/shortcuts.page --- eog-3.26.2/help/cs/shortcuts.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,156 +0,0 @@ - - - - - - Seznam všech klávesových zkratek. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Klávesové zkratky - -

Zde je seznam všech klávesových zkratek, které můžete v prohlížeči obrázků použít.

- -
- Otevírání, zavírání, ukládání a tisk - - - - - - - - - - - - - - - - - - - - - - - - - -

Otevřít soubor s obrázkem

CtrlO

Uložit obrázek do stávajícího souboru

CtrlS

Uložit kopii aktuálního obrázku pod novým názvem

ShiftCtrlS

Vytisknout aktuální obrázek

CtrlP

Zavřít aktuální okno

CtrlW

Nastavit obrázek jako pozadí pracovní plochy

CtrlF8

-
- -
- Zobrazení obrázků - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Přejít na předchozí obrázek ve složce

Back space / ←

Přejít na následující obrázek ve složce

Space bar / →

Přejít na první obrázek ve složce

AltHome

Přejít na poslední obrázek ve složce

AltEnd

Zvolit náhodný obrázek ve složce

CtrlM

Zobrazit galerii obrázků

F9

Zobrazit na celou obrazovku

F11

Zobrazit promítání snímků

F5

Aktuální velikost

Ctrl0 (nulá)

Co nejlépe přizpůsobit rozměrům okna

F

Posouvání po velkém obrázku

Altkurzorová šipka

-
- -
- Kopírování obrázku, aby mohl být vložen do jiné aplikace - - - - - -

Kopírovat

CtrlC

-
- -
- Přibližování a otáčení - - - - - - - - - - - - - - - - - -

Přiblížit

+

Oddálit

-

Otočit po směru hodinových ručiček

CtrlR

Otočit proti směru hodinových ručiček

ShiftCtrlR

-
- -
- Ostatní - - - - - - - - - - - - - - - - - -

Zobrazit postranní panel

CtrlF9

Zobrazit vlastnosti obrázku

AltEnter

Zpět

CtrlZ

Nápověda

F1

-
- diff -Nru eog-3.26.2/help/cs/slideshow.page eog-3.27.90/help/cs/slideshow.page --- eog-3.26.2/help/cs/slideshow.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - - - Kliknutím na Promítání snímků si postupně promítnete všechny obrázky ve složce. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Promítání snímků - -

Pokud si chcete zobrazit všechny obrázky ve složce formou promítání:

- - - -

Otevřete jeden obrázek s dané složky.

- - -

Klikněte na Promítání snímkůnebo zmáčkněte F5.

-

Spustí se promítání snímků na celé obrazovce. Každých pár sekund se zobrazí nový obrázek. Když chcete po snímcích přecházet rychleji nebo se vrátit na obrázek, který již byl ukázán, použijte kurzorové šipky ← a → pro posun zpět a vpřed.

- - -

Zmáčknutím Esc nebo F5 promítání snímků opustíte.

- - - -

Můžete si přizpůsobit nastavení promítání, např. jak dlouho má být každý obrázek zobrazen. Prodrobnosti viz téma předvolby promítání snímků.

- - diff -Nru eog-3.26.2/help/cs/translate.page eog-3.27.90/help/cs/translate.page --- eog-3.26.2/help/cs/translate.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Lokalizujte prohlížeč obrázků do svého národního jazyka - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Pomozte překládat -

Uživatelské rozhraní a dokumentaci prohlížeče obrázků překládá komunita dobrovolníků z celého světa. Vaše případná účast bude vítána.

-

Stále je řada jazyků, do kterých je třeba překlad udělat.

-

Jestli chcete překládat, musíte si vytvořit účet a přidat se k překladatelskému týmu svého jazyka. Pak budete moci odesílat své nové překlady.

- -

S ostatními překladateli můžete komunikovat pomocí IRC. Lidé na tomto kanále jsou z celého světa, tak počítejte s tím, že kvůli rozdílným časovým pásmům, nemusí reagovat hned.

-

Případně můžete kontaktovat Internacionalizační tým přes jeho poštovní konferenci.

- diff -Nru eog-3.26.2/help/cs/view.page eog-3.27.90/help/cs/view.page --- eog-3.26.2/help/cs/view.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - - Přepínejte se mezi obrázky mačkáním ← a → nebo použijte galerii k zobrazení všech obrázků. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -Zobrazení všech obrázků ve složce - -

Všechny obrázky ve složce můžete rychle procházet tak, že otevřete jeden z obrázků a pak budete klikat na tlačítka Následující a Předchozí vlevo a vpravo na zobrazeném obrázku (například). Můžete si také zobrazit galerii obrázků s malými náhledy všech obrázků ve složce naráz.

- -
- Procházení všech obrázků ve složce -

Když máte složku, která obsahuje několik obrázků, můžete je pohodlně procházet, aniž byste museli otevírat jeden za druhým.

- - -

Otevřete libovolný obrázek ze složky, kterou chcete procházet.

- - -

Mezi obrázky se přepínejte klikáním na Následující a Předchozí vlevo a vpravo na zobrazeném obrázku, nebo mačkejte klávesy ← a →.

-

Případně můžete použít klávesy ↑ a ↓ nebo mezerník a Backspace.

- - -

Obrázky můžete procházet i v režimu celé obrazovky, do kterého se dostanete kliknutím na tlačítko Celá obrazovka na hlavičkové liště, nebo zmáčknutím F11. K přecházení mezi obrázky pak použijte klávesnici.

-

Do normálního režimu prohlížení se vrátite zmáčknutím Esc nebo F11.

- - -
- - - - diff -Nru eog-3.26.2/help/cs/zoom.page eog-3.27.90/help/cs/zoom.page --- eog-3.26.2/help/cs/zoom.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/cs/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,42 +0,0 @@ - - - - - - - Zvětšete si obrázek podle možností obrazovky. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Jak si obrázek přiblížit - -

Přibližování a oddalování můžete použít, abyste na obrazovce viděli z obrázku větší nebo menší část. To se hodí například, když se díváte na velký obrázek jako celek nebo když chcete prozkoumat v obrázku nějaký detail.

- - - -

Přibližovat/oddalovat můžete pomocí kolečka myši. Směrem nahoru přibližujete, směrem dolů oddalujete.

- - -

Můžete také použít tlačítka na hlavičkové liště. Pro přiblížení klikněte na ikonu Zvětšit obrázek a pro oddálení na ikonu Zmenšit obrázek. Tlačítka mají podobu znamének „plus“ a „mínus“.

- - -

Případně můžete použít klávesovou zkratku Ctrl+ nebo Ctrl-.

- - - -

Když chcete obrázek zobrazený v jeho původní nepřeškálované velikosti, zvolte v rozbalovacím seznamu na hlavičkové liště 100% úroveň přiblížení. Případně můžete použít klávesovou zkratku Ctrl0 or 1.

- -
- Přiblížení v nejlepší velikosti vůči oknu -

Můžete si také zvolit takové přiblížení, aby obrázek plně využil velikost okna, i když ji budete měnit. Stačí navolit Nejlepší velikost v rozbalovacím seznamu na hlavičkové liště.

-
- diff -Nru eog-3.26.2/help/da/bug-filing.page eog-3.27.90/help/da/bug-filing.page --- eog-3.26.2/help/da/bug-filing.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/da/commandline.page eog-3.27.90/help/da/commandline.page --- eog-3.26.2/help/da/commandline.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/da/copy-paste.page eog-3.27.90/help/da/copy-paste.page --- eog-3.26.2/help/da/copy-paste.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/da/default.page eog-3.27.90/help/da/default.page --- eog-3.26.2/help/da/default.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/da/desktop-background.page eog-3.27.90/help/da/desktop-background.page --- eog-3.26.2/help/da/desktop-background.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/da/develop.page eog-3.27.90/help/da/develop.page --- eog-3.26.2/help/da/develop.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/da/documentation.page eog-3.27.90/help/da/documentation.page --- eog-3.26.2/help/da/documentation.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/da/edit.page eog-3.27.90/help/da/edit.page --- eog-3.26.2/help/da/edit.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/da/flip-rotate.page eog-3.27.90/help/da/flip-rotate.page --- eog-3.26.2/help/da/flip-rotate.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/da/format-change.page eog-3.27.90/help/da/format-change.page --- eog-3.26.2/help/da/format-change.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/da/formats-save.page eog-3.27.90/help/da/formats-save.page --- eog-3.26.2/help/da/formats-save.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/da/formats-view.page eog-3.27.90/help/da/formats-view.page --- eog-3.26.2/help/da/formats-view.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - Animation

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Windows-ikon

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap fra PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/da/index.page eog-3.27.90/help/da/index.page --- eog-3.26.2/help/da/index.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/da/introduction.page eog-3.27.90/help/da/introduction.page --- eog-3.26.2/help/da/introduction.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Introduktion - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/da/legal.xml eog-3.27.90/help/da/legal.xml --- eog-3.26.2/help/da/legal.xml 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/da/license.page eog-3.27.90/help/da/license.page --- eog-3.26.2/help/da/license.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/da/open.page eog-3.27.90/help/da/open.page --- eog-3.26.2/help/da/open.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/da/plugin-exif-digital.page eog-3.27.90/help/da/plugin-exif-digital.page --- eog-3.26.2/help/da/plugin-exif-digital.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/da/plugin-fullscreen-background.page eog-3.27.90/help/da/plugin-fullscreen-background.page --- eog-3.26.2/help/da/plugin-fullscreen-background.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/da/plugin-fullscreen-double-click.page eog-3.27.90/help/da/plugin-fullscreen-double-click.page --- eog-3.26.2/help/da/plugin-fullscreen-double-click.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/da/plugin-picasa.page eog-3.27.90/help/da/plugin-picasa.page --- eog-3.26.2/help/da/plugin-picasa.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/da/plugin-python-console.page eog-3.27.90/help/da/plugin-python-console.page --- eog-3.26.2/help/da/plugin-python-console.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/da/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/da/plugin-send-by-mail.page eog-3.27.90/help/da/plugin-send-by-mail.page --- eog-3.26.2/help/da/plugin-send-by-mail.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/da/plugin-slideshow-shuffle.page eog-3.27.90/help/da/plugin-slideshow-shuffle.page --- eog-3.26.2/help/da/plugin-slideshow-shuffle.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/da/plugins.page eog-3.27.90/help/da/plugins.page --- eog-3.26.2/help/da/plugins.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/da/plugin-zoom-width.page eog-3.27.90/help/da/plugin-zoom-width.page --- eog-3.26.2/help/da/plugin-zoom-width.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/da/preferences.page eog-3.27.90/help/da/preferences.page --- eog-3.26.2/help/da/preferences.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Indstillinger -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

Viser enhver gennemsigtig del af billedet i et ternet mønster.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/da/print.page eog-3.27.90/help/da/print.page --- eog-3.26.2/help/da/print.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/da/rename-multiple.page eog-3.27.90/help/da/rename-multiple.page --- eog-3.26.2/help/da/rename-multiple.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/da/shortcuts.page eog-3.27.90/help/da/shortcuts.page --- eog-3.26.2/help/da/shortcuts.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/da/slideshow.page eog-3.27.90/help/da/slideshow.page --- eog-3.26.2/help/da/slideshow.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/da/translate.page eog-3.27.90/help/da/translate.page --- eog-3.26.2/help/da/translate.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/da/view.page eog-3.27.90/help/da/view.page --- eog-3.26.2/help/da/view.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/da/zoom.page eog-3.27.90/help/da/zoom.page --- eog-3.26.2/help/da/zoom.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/da/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/de/bug-filing.page eog-3.27.90/help/de/bug-filing.page --- eog-3.26.2/help/de/bug-filing.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Einen Fehlerbericht zum Bildbetrachter schreiben. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Über ein Problem mit dem Bildbetrachter berichten -

Der Bildbetrachter wird von einer Gemeinschaft aus Freiwilligen betreut. Sie sind herzlich eingeladen, sich daran zu beteiligen.

- -

Falls Sie auf Probleme mit dem Bildbetrachter stoßen, beispielsweise Programmabstürze oder unerwartete Verhaltensweisen, oder falls Sie ein bestimmtes Funktionsmerkmal vermissen, erstellen Sie einen Fehlerbericht. Besuchen Sie hierzu . Fehlerberichte helfen Softwareentwicklern, Probleme zu erfassen, so dass deren Ursachen beseitigt werden können.

-

Um daran teilzunehmen, benötigen Sie ein Konto. Es ermöglicht Ihnen das Berichten von Fehlern und Schreiben von Kommentaren. Außerdem erhalten Sie so Benachrichtigungen per E-Mail über Statusaktualisierungen zu Ihrem Fehlerbericht. Falls Sie nicht bereits über ein Konto verfügen, klicken Sie auf den Verweis New Account, um eines zu erstellen.

-

Sobald Sie ein Konto haben, melden Sie sich an und klicken auf File a BugCoreeog. Bevor Sie über einen Fehler berichten, lesen Sie bitte die Bug Writing Guidelines und durchsuchen Sie bitte die Fehlerdatenbank, um zu sehen, ob ein entsprechender Bericht nicht schon existiert.

-

Um Ihren Fehlerbericht zu hinterlassen, wählen Sie die Komponente im Menü Component aus. Falls Sie sich an dieser Stelle nicht sicher sind, wählen Sie general.

-

Falls Sie eine Anfrage nach einem neuen Funktionsmerkmal stellen, wählen Sie enhancement im Menü Severity. Füllen Sie die Felder »Summary« (Zusammenfassung) und »Description« (Beschreibung) aus und klicken Sie auf Submit Bug.

-

Ihr Bericht erhält eine Kennungsnummer. Der Status des Berichts wird aktualisiert, sobald jemand sich darum kümmert. Die Fehlerbeseitigung kann eine gewisse Zeit in Anspruch nehmen. Die Softwareentwickler könnten Sie außerdem um weitere Informationen bitten, um die Ursache des Problems einzugrenzen.

- diff -Nru eog-3.26.2/help/de/commandline.page eog-3.27.90/help/de/commandline.page --- eog-3.26.2/help/de/commandline.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,73 +0,0 @@ - - - - - - Befehlszeile - Der Befehl eog kann eine beliebige Anzahl von Bildern in verschiedenen Modi öffnen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Die Befehlszeile - -

Um den Bildbetrachter in einem Terminal zu starten, geben Sie den Befehl eog ein.

-

Sie können eine bestimmte Datei öffnen, indem Sie den Dateinamen nach dem eog-Befehl eingeben:

-eog bild.jpeg -

Sie können einen bestimmten Ordner öffnen, indem Sie den Ordnernamen nach dem eog-Befehl eingeben:

-eog Ordner -

Um alle Bilder in einem Ordner auf einmal anzuzeigen, können Sie die Bildersammlung durchsuchen.

- -
- Öffnen eines Bildes im Vollbildmodus - eog --fullscreen bild.jpeg -
- -
- Bild in einer neuen Instanz öffnen - eog --new-instance bild.jpeg -
-
- Einen Ordner im Diaschau-Modus öffnen - eog --slide-show Bilder/ -
- diff -Nru eog-3.26.2/help/de/copy-paste.page eog-3.27.90/help/de/copy-paste.page --- eog-3.26.2/help/de/copy-paste.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - - - Kopieren und Einfügen aus dem Bildbetrachter in eine andere Anwendung. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Ein Bild kopieren und einfügen -

Um ein Bild vom Bildbetrachter in eine andere Anwendung zu kopieren, klicken Sie mit der rechten Maustaste auf das Bild und wählen Sie Kopieren.

- -

Das Bild wurde in die Zwischenablage kopiert und kann nun in ein LibreOffice-Dokument, eine Gimp-Datei oder ein anderes Programm eingefügt werden.

- - diff -Nru eog-3.26.2/help/de/default.page eog-3.27.90/help/de/default.page --- eog-3.26.2/help/de/default.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - Einrichten des Bildbetrachters als Standardanwendung zum Betrachten von Bildern. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Standardmäßig Bilder im Bildbetrachter öffnen -

Um den Bildbetrachter zum Öffnen bestimmter Bilddateitypen als Vorgabeanwendung festzulegen, gehen Sie wie folgt vor:

- - - -

Klicken Sie in der Dateiverwaltung mit der rechten Maustaste auf die Datei und wählen Sie Eigenschaften.

- - -

Klicken Sie auf den Reiter Öffnen mit. Eine Liste der Empfohlenen Anwendungen erscheint.

- - -

Wählen Sie den Bildbetrachter und klicken Sie auf Als Vorgabe festlegen.

-

Falls der Bildbetrachter nicht in der Liste der Empfohlenen Anwendungen erscheint, klicken Sie auf Weitere Anwendungen anzeigen, woraufhin die Liste Weitere Anwendungen erscheint. Wählen Sie Bildbetrachter und klicken Sie auf Als Vorgabe festlegen.

- - -

Klicken Sie auf Schließen.

- - - -

In der Zukunft wird bei einem Doppelklick auf eine Datei dieses Typs diese im Bildbetrachter geöffnet.

- - diff -Nru eog-3.26.2/help/de/desktop-background.page eog-3.27.90/help/de/desktop-background.page --- eog-3.26.2/help/de/desktop-background.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - Verwenden Sie Ihr Lieblingsbild als Arbeitsflächenhintergrund. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Das Bild als Arbeitsflächenhintergrund festlegen -

Um das gegenwärtig betrachtete Bild als Arbeitsflächenhintergrund festzulegen, klicken Sie auf Als Hintergrundbild festlegen.

- -

Dadurch wird unmittelbar für den Arbeitsflächenhintergrund das Bild verwendet, das im Bildbetrachter geöffnet ist. Sie werden gefragt, ob das Bild im Einstellungsfenster Hintergrund noch angepasst werden soll. Falls Sie auf Verbergen klicken, wird diese Meldung ausgeblendet.

- diff -Nru eog-3.26.2/help/de/develop.page eog-3.27.90/help/de/develop.page --- eog-3.26.2/help/de/develop.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - So verbessern Sie den Bildbetrachter - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Unterstützen Sie uns bei der Entwicklung -

Der Bildbetrachter wird von einer Gemeinschaft aus Freiwilligen entwickelt und betreut. Sie sind herzlich eingeladen, sich daran zu beteiligen.

-

Wenn Sie bei der Entwicklung des Bildbetrachters helfen möchten, so können Sie mittels IRC oder über unsere Mailing-Liste mit den Entwicklern in Kontakt treten.

- - diff -Nru eog-3.26.2/help/de/documentation.page eog-3.27.90/help/de/documentation.page --- eog-3.26.2/help/de/documentation.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - Treten Sie der Dokumentations-Gruppe bei. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Unterstützen Sie uns beim Schreiben der Dokumentation - -

Die Dokumentation des Bildbetrachters wird von einer Gemeinschaft aus Freiwilligen betreut. Sie sind herzlich eingeladen, sich daran zu beteiligen.

- -

Um das Dokumentations-Projekt zu unterstützen, sind Sie herzlich eingeladen mit uns in Kontakt zu treten mittels IRC oder über unsere Mailing-Liste.

-

Unsere Wiki-Seite enthält nützliche Informationen.

- - - diff -Nru eog-3.26.2/help/de/edit.page eog-3.27.90/help/de/edit.page --- eog-3.26.2/help/de/edit.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,71 +0,0 @@ - - - - - - Klicken Sie auf Öffnen mit, um das Bild mit einem externen Bildbearbeitungsprogramm zu bearbeiten. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - -Ein Bild bearbeiten oder löschen - -
Ein Bild bearbeiten -

Der Bildbetrachter ist nur zur Bildanzeige gedacht und nicht zur Bildbearbeitung. Dafür müssen Sie ein Bearbeitungsprogramm verwenden, wie GIMP. So öffnen Sie ein Bild zum Bearbeiten in einer anderen Anwendung:

- - -

Klicken Sie auf Öffnen mit oder klicken Sie mit der rechten Maustaste auf das Bild.

- - -

Wählen Sie die Anwendung aus, mit der Sie Ihr Bild bearbeiten wollen.

- - -

Sobald Sie die Bearbeitung beendet haben, speichern und schließen Sie die andere Anwendung.

- - -

Der Bildbetrachter erkennt, dass das Bild geändert wurde und lädt es neu.

- - -
- -
-Ein Bild löschen -

Um ein nicht mehr benötigtes Bild zu löschen, klicken Sie mit der rechten Maustaste auf das Bild und wählen Sie In den Papierkorb verschieben.

-
- - diff -Nru eog-3.26.2/help/de/flip-rotate.page eog-3.27.90/help/de/flip-rotate.page --- eog-3.26.2/help/de/flip-rotate.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,85 +0,0 @@ - - - - - - Horizontal/vertikal, mit dem oder gegen den Uhrzeigersinn - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Bilder drehen oder spiegeln - -

Falls Ihre Bilder falsch ausgerichtet sind oder auf dem Kopf stehen, können Sie sie drehen oder spiegeln, um sie wieder richtig anzuzeigen.

- - -
-Ein Bild spiegeln - -

Klicken Sie auf Bearbeiten.

 -

Wählen Sie entweder Horizontal spiegeln oder Vertikal spiegeln.

 - -

Um das auf diese Weise gespiegelte Bild beizubehalten, klicken Sie auf Speichern.

-

Anderenfalls speichern Sie das Bild nicht, und Sie werden es beim nächsten Öffnen in der originalen Ausrichtung vorfinden.

- - -
- -
-Ein Bild drehen - -

Bewegen Sie den Mauszeiger über das Bild. Zwei Knöpfe mit Pfeil erscheinen unten.

 -

Wählen Sie entweder Das Bild um 90 Grad nach links drehen oder Das Bild um 90 Grad nach rechts drehen.

 - -

Um das auf diese Weise gedrehte Bild beizubehalten, klicken Sie auf Speichern.

-

Anderenfalls speichern Sie das Bild nicht, und Sie werden es beim nächsten Öffnen in der originalen Ausrichtung vorfinden.

- - - -

Sie können auch Tastenkombinationen verwenden:

- - - - - - - - - - -

Im Uhrzeigersinn drehen

StrgR

Gegen den Uhrzeigersinn drehen

StrgUmschalttasteR

- -
- diff -Nru eog-3.26.2/help/de/format-change.page eog-3.27.90/help/de/format-change.page --- eog-3.26.2/help/de/format-change.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,94 +0,0 @@ - - - - - - Sie können Bilder von einem Format in ein anderes umwandeln, auch in einer Stapelverarbeitung mit mehreren Bildern. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Umwandeln in ein anderes Dateiformat - -

Bilder werden in einem spezifischen Dateiformat gespeichert, wie JPEG oder PNG. Sie können Umwandlungen von einem Dateiformat in ein anderes vornehmen.

- -
- Umwandeln eines einzelnen Bildes in einen anderen Dateityp - - -

Klicken Sie auf Speichern unter …. Der Dialog Bild speichern wird geöffnet.

- - -

Ändern Sie im Feld Name die Erweiterung des Dateityps, in den Sie das Bild umwandeln wollen. Die Dateierweiterung ist der Teil des Dateinamens nach dem Punkt.

-

Um beispielsweise eine JPEG-Datei (.jpg) in eine Bitmap-Datei (.bmp) umzuwandeln, gehen Sie folgendermaßen vor:

-

Originaldatei: bild.jpg

-

Neue Datei: bild.bmp

- - -

Klicken Sie auf Speichern, und eine neue Datei wird im neuen Format gespeichert. Die alte Datei (im alten Format) bleibt dabei erhalten und wird nicht gelöscht.

- - - -

Der Bildbetrachter versucht anhand der von Ihnen gewählten Dateiendung zu bestimmen, in welchem Dateiformat ein Bild gespeichert werden soll. Falls die eingegebene Dateiendung nicht erkannt werden kann oder Sie nicht wissen, welche Sie verwenden wollen oder sollen, klicken Sie auf Unterstützte Bilddateien im Bild speichern-Fenster. Dann können Sie das Dateiformat in einer Auswahlliste wählen.

- -
- -
- Umwandeln mehrerer Bilder in einen anderen Dateityp -

Sie können eine Anzahl von Bildern von einem Dateiformat in ein anderes in einem Arbeitsgang umwandeln. Dies ist sinnvoll, wenn Sie größere Mengen von Bildern umwandeln wollen.

- - -

Drücken Sie die Strg-Taste und klicken Sie in der Bildersammlung auf die Bilder, die Sie umwandeln wollen, oder drücken Sie StrgA, um alle Bilder auszuwählen.

- - -

Klicken Sie auf Speichern unter. Das folgende Fenster wird geöffnet.

- - - -

Die umgewandelten Bilder werden standardmäßig im aktuellen Ordner gespeichert. Falls Sie sie an einem anderen Ort speichern wollen, wählen Sie den Ordner in der Auswahlliste Ordner wählen aus.

- - -

Wählen Sie das Dateiformat zur Umwandlung in der Auswahlliste rechts vom Eingabefeld Dateinamen-Format aus.

- - -

Klicken Sie auf Speichern.

- - -
- - diff -Nru eog-3.26.2/help/de/formats-save.page eog-3.27.90/help/de/formats-save.page --- eog-3.26.2/help/de/formats-save.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - JPEG, PNG, BMP und andere. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - - Unterstützte Formate zum Speichern von Bildern -

Der Bildbetrachter kann Bilder in folgenden Formaten speichern:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

Der Bildbetrachter kann, abhängig von Ihrer Systemkonfiguration, möglicherweise noch andere Bildformate speichern.

 - diff -Nru eog-3.26.2/help/de/formats-view.page eog-3.27.90/help/de/formats-view.page --- eog-3.26.2/help/de/formats-view.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ - - - - - - - Der Bildbetrachter deckt einen weiten Bereich von Grafikformaten ab, wie PNG, JPEG und TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - - Unterstützte Bildformate - -

Der Bildbetrachter kann Bilder in den folgenden Formaten öffnen:

- -

ANI - Animation

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Windows Icon

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap from the PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

Falls Sie versuchen, ein nicht unterstütztes Format zu öffnen, erhalten Sie die Fehlermeldung Bild »Bildname« konnte nicht geöffnet werden.

- diff -Nru eog-3.26.2/help/de/index.page eog-3.27.90/help/de/index.page --- eog-3.26.2/help/de/index.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ - - - - - Hilfe für den Eye of GNOME-Bildbetrachter. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME-Bildbetrachter - Eye of GNOME-Bildbetrachter - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> Eye of GNOME-Bildbetrachter -
- Betrachten von Bildern -
- -
- Bearbeiten von Bildern -
- -
- Drucken von Bildern -
- -
- Zusätzliche Funktionsmerkmale hinzufügen - -
-
- Fortgeschritten -
- -
- Häufig gestellte Fragen -
- -
- Tipps und Tricks -
- -
- Mitarbeiten -
- diff -Nru eog-3.26.2/help/de/introduction.page eog-3.27.90/help/de/introduction.page --- eog-3.26.2/help/de/introduction.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - Willkommen zum Eye of GNOME-Bildbetrachter. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Einführung - -

Eye of GNOME ist ein Bildbetrachter. Damit können Sie Bilder beinahe jeden Typs betrachten. Das Programm kann mit großen Bildersammlungen umgehen und zeigt diese auf Wunsch in einer Diaschau an. Sie können auch einfache Änderungen an Ihren Bildern vornehmen, wie beispielsweise Drehen oder Spiegeln, oder sie in ein anderes Dateiformat umwandeln.

- - diff -Nru eog-3.26.2/help/de/legal.xml eog-3.27.90/help/de/legal.xml --- eog-3.26.2/help/de/legal.xml 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Dieses Werk wird unter einer Creative Commons Attribution-Share Alike 3.0 United States License verbreitet.

-

Als besondere Ausnahme erteilen Ihnen die Urheberrechtsinhaber die Genehmigung, den in diesem Dokument enthaltenen Beispielcode ohne Einschränkung unter den Bedingungen Ihrer Wahl zu verbreiten.

- diff -Nru eog-3.26.2/help/de/license.page eog-3.27.90/help/de/license.page --- eog-3.26.2/help/de/license.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,59 +0,0 @@ - - - - - - - Rechtliche Hinweise. - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - - Lizenz -

Dieses Werk wird unter einer CreativeCommons-Lizenz »Attribution-Share Alike 3.0 Unported« verbreitet.

-

Sie dürfen:

- - - <em>Freizugeben</em> -

Das Werk bzw. den Inhalt vervielfältigen, verbreiten und öffentlich zugänglich machen.

- - - <em>Änderungen vorzunehmen</em> -

Abwandlungen und Bearbeitungen des Werkes bzw. Inhaltes anfertigen.

- - -

Unter den folgenden Bedingungen:

- - - <em>Weitergabe</em> -

Sie müssen den Namen des Autors/Rechteinhabers in der von ihm festgelegten Weise nennen.

- - - <em>Unter gleichen Bedingungen</em> -

Wenn Sie das lizenzierte Werk bzw. den lizenzierten Inhalt bearbeiten oder in anderer Weise erkennbar als Grundlage für eigenes Schaffen verwenden, dürfen Sie die daraufhin neu entstandenen Werke bzw. Inhalte nur unter Verwendung von Lizenzbedingungen weitergeben, die mit denen dieses Lizenzvertrages identisch oder vergleichbar sind.

- - -

Den vollständigen Text der Lizenz finden sie auf der CreativeCommons-Webseite. Oder Sie können den vollständigen Commons Deed lesen.

- diff -Nru eog-3.26.2/help/de/open.page eog-3.27.90/help/de/open.page --- eog-3.26.2/help/de/open.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - Bilder in einem neuen Fenster öffnen. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - - -Ein Bild öffnen - -

Bilder sollten automatisch im Bildbetrachter geöffnet werden, sobald Sie im Dateiverwalter darauf doppelklicken. Falls das nicht der Fall ist, müssen Sie den Bildbetrachter als Standardanwendung zum Betrachten von Bildern auswählen.

- -

Jedes Bild, das Sie doppelklicken, wird in einem neuen Bildbetrachter-Fenster geöffnet. Sie können jedoch auch mehrere Bilder in einem Fenster öffnen.

- -

Sie können auch Bilder innerhalb des Bildbetrachters selbst öffnen:

- -

Klicken Sie auf Öffnen (oder drücken Sie StrgO). Der Dialog Bild öffnen wird angezeigt.

 -

Wählen Sie das zu öffnende Bild aus und klicken Sie auf Öffnen.

 - - - diff -Nru eog-3.26.2/help/de/plugin-exif-digital.page eog-3.27.90/help/de/plugin-exif-digital.page --- eog-3.26.2/help/de/plugin-exif-digital.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,99 +0,0 @@ - - - - - - Informationen wie Kameraeinstellungen, Histogramm, Geoposition und Datum betrachten. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Detaillierte Informationen zu einem Bild anzeigen - -

Von Digitalkameras aufgenommene Bilder werden mit zusätzlichen eingebetteten Informationen gespeichert, zum Beispiel dem Aufnahmezeitpunkt, den Belichtungseinstellungen und in einigen Fällen auch dem Aufnahmeort.

- -

Dieses Thema erläutert, wie Sie auf diese Informationen zugreifen können.

- -
-Datum in Statusleiste anzeigen - -

Das Aufnahmedatum des Bildes wird unten rechts in der Statuszeile des Fensters angezeigt.

-

Öffnen Sie hierzu das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen. Öffnen Sie den Reiter Plugins und aktivieren Sie Datum in Statusleiste.

-
- -
- Detaillierte Exif-Daten -

Die detaillierten Informationen zu den mit digitalen Kameras aufgenommen Bildern werden Exif-Daten genannt. Sie können Sie durch Installieren eines Plugins für den Bildbetrachter anzeigen lassen.

- - - -

Um diese Funktionalität hinzuzufügen, müssen Sie die eog-plugins installieren.

- - -

Falls eog-plugins installiert ist, öffnen Sie das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen Öffnen Sie den Reiter Plugins. Aktivieren Sie Exif-Anzeige und schließen Sie den Dialog.

- - -

Klicken Sie auf Seitenleiste, um die Kameraeinstellungen des Bildes anzuzeigen. Um auch ein Histogramm anzuzeigen, welches die Farbbalance und die Licht- und Schattenwerte darstellt, wählen Sie Exif-Anzeige im Reiter Plugins und klicken Sie auf Einstellungen. Schauen Sie sich die gewünschten Histogramme an, die unter Histogramm angezeigt werden.

- - -

Sie können auch die bei der Aufnahme eines Fotos gewählten Kameraeinstellungen in der Statusleiste anzeigen. Wählen Sie Exif-Anzeige im Reiter Plugins und klicken Sie auf Einstellungen. Aktivieren Sie Display camera settings in statusbar.

- - -
- -
- Standortkarte eines Fotos anzeigen -

Einige Kameras sind in der Lage, Informationen zur Geoposition (Geotags) zu digitalen Fotos hinzuzufügen. Geotags sind üblicherweise die GPS-Koordinaten (Breitengrad und Längengrad) des Ortes, an dem das Foto aufgenommen wurde.

- - - -

Um diese Funktionalität hinzuzufügen, müssen Sie die eog-plugins installieren.

- - -

Falls eog-plugins installiert ist, öffnen Sie das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen. Öffnen Sie den Reiter Plugins. Aktivieren Sie dort Karte und schließen Sie den Dialog.

- - -

Klicken Sie auf Seitenleiste, um die Karte anzuzeigen.

- - -

Die Karte zeigt den Aufnahmeort des Bildes an, sofern die Informationen zur Geoposition innerhalb der Bilddaten verfügbar sind. Viele Kameras zeichnen die Informationen zur Geoposition nicht auf.

-
- - - diff -Nru eog-3.26.2/help/de/plugin-fullscreen-background.page eog-3.27.90/help/de/plugin-fullscreen-background.page --- eog-3.26.2/help/de/plugin-fullscreen-background.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Aktiviert die Änderung der Hintergrundfarbe im Vollbildmodus. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Hintergrundfarbe im Vollbildmodus ändern - -

Falls gewünscht, können Sie die Farbe des Hintergrundes im Vollbildmodus ändern.

- -

Öffnen Sie das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen. Öffnen Sie den Reiter Plugins. Dann wählen Sie Vollbildhintergrund und klicken Sie auf Einstellungen. Wählen Sie die gewünschte Farbe für den Vollbildmodus aus und schließen Sie den Dialog.

- -

Nun wird im Vollbildmodus die von Ihnen gewählte Hintergrundfarbe verwendet.

- -

Um diese Funktionalität hinzuzufügen, müssen Sie die eog-plugins installieren.

- - diff -Nru eog-3.26.2/help/de/plugin-fullscreen-double-click.page eog-3.27.90/help/de/plugin-fullscreen-double-click.page --- eog-3.26.2/help/de/plugin-fullscreen-double-click.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Den Vollbildmodus durch einen Doppelklick auf ein Bild aktivieren. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Vollbildmodus durch Doppelklick - - - -

Falls gewünscht, können Sie es so einrichten, dass durch Doppelklick auf Bilder im Bildbetrachter in den Vollbildmodus geschaltet wird.

- -

Öffnen Sie das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen. Öffnen Sie den Reiter Plugins. Aktivieren Sie Vollbildmodus durch Doppelklick und schließen Sie den Dialog.

- -

Sobald aktiviert, wird durch einen Doppelklick auf ein Bild zwischen Vollbildmodus und gewöhnlichem Fenstermodus umgeschaltet.

- - diff -Nru eog-3.26.2/help/de/plugin-picasa.page eog-3.27.90/help/de/plugin-picasa.page --- eog-3.26.2/help/de/plugin-picasa.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,52 +0,0 @@ - - - - - - Übertragen Sie Bilder direkt aus dem Bildbetrachter zu PicasaWeb. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Hochladen von Fotos zu <app>PicasaWeb</app> - -

PicasaWeb ist ein Bilderdienst, über den Sie Bilder online für andere Benutzer freigeben können. Sie können Bilder direkt aus dem Bildbetrachter zu PicasaWeb hochladen.

- -

Öffnen Sie das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen. Öffnen Sie den Reiter Plugins und aktivieren Sie PicasaWeb-Uploader.

-

Dadurch erhalten Sie einen praktischen Menüeintrag Hochladen zu PicasaWeb.

- -

Um diese Funktionalität hinzuzufügen, müssen Sie die eog-plugins installieren.

- - diff -Nru eog-3.26.2/help/de/plugin-python-console.page eog-3.27.90/help/de/plugin-python-console.page --- eog-3.26.2/help/de/plugin-python-console.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - Die Python-Konsole kann zum Hinzufügen von zusätzlichen Funktionen und Ausführen von Skripten im Bildbetrachter verwendet werden. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Python-Konsole - -

Der Bildbetrachter verfügt über ein Plugin-System, welches auf der Skriptsprache Python basiert. Durch Aktivierung der Python-Konsole erhalten Sie direkten Zugriff auf einen Python-Interpreter innerhalb des Bildbetrachters, den Sie dann beispielsweise zum Schreiben von Skripten und Bearbeiten von Bildern einsetzen können.

- - - -

Um diese Funktionalität hinzuzufügen, müssen Sie die eog-plugins installieren.

- - -

Sobald eog-plugins installiert ist, öffnen Sie das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen. Öffnen Sie den Reiter Plugins.

- - -

Aktivieren Sie Python-Konsole und klicken Sie auf Schließen.

- - -

Klicken Sie auf Python-Konsole, um die Konsole zu öffnen.

- - - - diff -Nru eog-3.26.2/help/de/plugin-send-by-mail.page eog-3.27.90/help/de/plugin-send-by-mail.page --- eog-3.26.2/help/de/plugin-send-by-mail.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Ein Bild als Anhang einer neuen E-Mail versenden. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Bilder als E-Mail versenden - -

Sie können einen Knopf hinzufügen, über den Sie auf einfache Weise Bilder per E-Mail versenden können.

- -

Öffnen Sie das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen. Öffnen Sie den Reiter Plugins. Aktivieren Sie Als E-Mail versenden und klicken Sie auf Schließen. Dadurch erhalten Sie einen Menüeintrag namens Als E-Mail versenden

- -

Um diese Funktionalität hinzuzufügen, müssen Sie die eog-plugins installieren.

- - -

Evolution muss für Ihr E-Mail-Konto eingerichtet werden, damit dies funktioniert.

- - - - - diff -Nru eog-3.26.2/help/de/plugin-slideshow-shuffle.page eog-3.27.90/help/de/plugin-slideshow-shuffle.page --- eog-3.26.2/help/de/plugin-slideshow-shuffle.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,52 +0,0 @@ - - - - - - - Fotos während einer Diaschau in einer zufälligen Reihenfolge anzeigen. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Diaschau-Mischer - -

Sie können einrichten, dass Ihre Bilder in einer zufälligen Reihenfolge angezeigt werden, wenn Sie diese im Diaschau-Modus betrachten.

- -

Öffnen Sie das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen. Öffnen Sie den Reiter Plugins. Aktivieren Sie Diaschau-Mischer und schließen Sie den Dialog.

- -

Um diese Funktionalität hinzuzufügen, müssen Sie die eog-plugins installieren.

- - diff -Nru eog-3.26.2/help/de/plugins.page eog-3.27.90/help/de/plugins.page --- eog-3.26.2/help/de/plugins.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,100 +0,0 @@ - - - - - - Plugins für weitere Funktionen installieren. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Plugins - -

Das Paket eog-plugins enthält eine Reihe von Plugins für den Bildbetrachter, welcher damit um zusätzliche Funktionalität ergänzt wird. Plugins und zusätzliche Funktionsmerkmale werden nachstehend aufgelistet.

- - -

Sie können die eog-plugins über die Paketverwaltung Ihrer Distribution installieren.

- - - -

Installieren Sie eog-plugins

- - - - -

Die folgenden Plugins sind in eog-plugins enthalten:

- - - -

Datum in Statusleiste: Zeigt das Datum Ihres Bildes in der Statusleiste an.

- - -

Exif-Anzeige: Zeigt Kameraeinstellungen und Histogramme für digitale Bilder an.

- - -

Vollbildhintergrund: Ermöglicht die Änderung des Hintergrundes im Vollbildmodus.

- - -

Vollbildmodus durch Doppelklick: Aktiviert den Volbildmodus mit Doppelklick.

- - -

Karte: Stellt die Geoposition Ihres Bildes auf einer Karte dar.

- - -

PicasaWeb-Uploader: Hochladen Ihrer Bilder zu PicasaWeb.

- - -

Python-Konsole: Eine Python-Konsole für den Bildbetrachter.

- - -

Als E-Mail versenden: Versendet ein Bild als Anhang einer neuen E-Mail.

- - -

Diaschau-Mischer: Mischt Bilder im Diaschau-Modus.

- - -

Vergrößerung auf Bildbreite anpassen: Passt die Vergrößerungsstufe des Bildes so an, dass es in das Fenster eingepasst wird.

- - - - -

Sie können Ihre Plugins im Plugins-Reiter in den Einstellungen verwalten.

- - - diff -Nru eog-3.26.2/help/de/plugin-zoom-width.page eog-3.27.90/help/de/plugin-zoom-width.page --- eog-3.26.2/help/de/plugin-zoom-width.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Passt die Vergrößerungsstufe des Bildes so an, dass es in das Fenster eingepasst wird. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Vergrößerung auf Bildbreite anpassen - -

Aktivieren Sie das Plugin Vergrößerung auf Bildbreite anpassen, wenn Sie die Größe der Bilder so anpassen wollen, dass die Breite des Fensters vollständig ausgefüllt ist.

- -

Öffnen Sie das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen. Öffnen Sie den Reiter Plugins. Aktivieren Sie Vergrößerung auf Bildbreite anpassen und schließen Sie den Dialog.

- -

Um diese Funktionalität hinzuzufügen, müssen Sie die eog-plugins installieren.

- - diff -Nru eog-3.26.2/help/de/preferences.page eog-3.27.90/help/de/preferences.page --- eog-3.26.2/help/de/preferences.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,109 +0,0 @@ - - - - - - Bildansicht, Diaschau und Plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Einstellungen -

Dieses Thema erläutert alle Einstellungen, die Sie im Bildbetrachter anpassen können. Öffnen Sie das Anwendungsmenü in der oberen Leiste und klicken Sie auf Einstellungen, um mit den Änderungen der Einstellungen zu beginnen.

- - - -
-Einstellungen zum Betrachten von Bildern - - - - Bildverbesserungen -

Wählen Sie die Option Bild bei Vergrößerung glätten, um das Bild zu glätten, wenn Sie den Vergrößerungsfaktor ändern. Dadurch wird die Anzeigequalität von Bildern geringer Auflösung verbessert, indem die ausgefransten Ränder geglättet werden.

-

Wenn Sie Automatische Drehung des Bildes aktivieren, werden Bilder anhand ihrer Exif-Metadaten automatisch gedreht. Diese Information wird von einer digitalen Kamera automatisch in die Bilddaten eingefügt und kann Details zur Haltung der Kamera während der Aufnahme enthalten. Wenn die automatische Drehung aktiviert ist, werden beispielsweise Fotos im Hochformat automatisch entsprechend gedreht. Diese Drehung wird nicht gespeichert, bis Sie das gedrehte Bild tatsächlich speichern.

-

Die automatische Ausrichtung funktioniert nicht bei allen Bildern, sondern nur bei Bildern, die mit einer Kamera aufgenommen wurden, die Exif-Metadaten zur Ausrichtung speichert.

- - - Transparente Bildbereiche -

Wählen Sie eine der folgenden Optionen, um festzulegen, wie transparente Bereiche eines Bildes anzeigt werden sollen, falls vorhanden:

- - -

Als Karo-Muster:

-

Zeigt die transparenten Teile des Bildes in einem Karo-Muster an.

- - -

Als benutzerdefinierte Farbe:

-

Stellt transparente Teile des Bildes in einer von Ihnen festgelegten Farbe dar. Klicken Sie auf den Farbauswahl-Knopf, um eine Farbe auszuwählen.

- - -

Als Hintergrund:

-

Zeigt eventuell vorhandene transparente Bereiche des Bildes in der Hintergrundfarbe an, sofern Als benutzerdefinierte Farbe in Hintergrund aktiviert ist.

- - - - -
- - -
-Einstellungen für die Diaschau - -

So passen Sie die Einstellungen der Diaschau an:

- - -

Unter Bildvergrößerung können Sie wählen, ob das Bild vergrößert werden soll, um an die Größe des Fensters angepasst zu werden.

- - -

Unter Abfolge können Sie wählen, wie viele Sekunden lang jedes Bild angezeigt werden soll (zwischen 1 und 100), bevor das nächste Bild angezeigt wird.

- - -

Aktivieren Sie Endlosschleife, wenn die Diaschau endlos wiederholt werden soll. Falls dies nicht aktiviert ist, beginnt die Diaschau mit dem von Ihnen ausgewählten Bild und endet mit dem letzten Bild im Ordner.

- - -
- - -
-Plugin-Einstellungen - - - - -

Hier können Sie einige zusätzliche Funktionsmerkmale aktivieren oder deaktivieren. Das Bild an der linken Seite zeigt die standardmäßig zur Verfügung stehenden Plugins.

- -

Es ist ratsam, das Paket eog-plugins zu installieren,welches Plugins enthält, die eine Reihe von zusätzlichen Funktionsmerkmalen bereitstellen. Nachdem Sie dies getan haben, können Sie zusätzliche Plugins zur Aktivierung auswählen, wie rechts zu sehen ist.

-
- - diff -Nru eog-3.26.2/help/de/print.page eog-3.27.90/help/de/print.page --- eog-3.26.2/help/de/print.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - Klicken Sie auf Drucken …. Anschließend können Sie in den einzelnen Reitern die Druckeinstellungen anpassen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Drucken eines Bildes - -

So drucken Sie das gegenwärtig angezeigte Bild:

- - - -

Klicken Sie auf Drucken ….

- - -

Wählen Sie im Reiter Allgemein den zu verwendenden Drucker sowie die Anzahl der zu druckenden Kopien aus.

- - -

Wählen Sie den Reiter Bildeinstellungen. Hier können Sie die Position und Größe Ihres Bildes anpassen.

-

Die Position des Bildes in der Seite kann auch angepasst werden, in dem Sie es mit der Maus innerhalb der Ansicht verschieben.

- - -

Wenn Sie qualitativ hochwertiges Fotopapier verwenden, öffnen Sie den Reiter Seite einrichten und wählen Sie den korrekten Papiertyp. Sie sollten außerdem im Reiter Bildqualität eine hohe Qualität wählen, so dass Sie die bestmögliche Fotoqualität erzielen.

- - -

Klicken Sie auf Drucken.

- - - -

Beachten Sie, dass einige der oben erwähnten Reiter nicht für alle Druckermodelle angezeigt werden. Das ergibt sich dadurch, dass die Treiber für jene Drucker die Änderung bestimmter Einstellungen nicht zulassen. Wenn beispielsweise der Reiter Bildqualität nicht angezeigt wird, ist das wahrscheinlich darauf zurückzuführen, dass diese Einstellungen nicht vom Druckertreiber unterstützt werden.

- - diff -Nru eog-3.26.2/help/de/rename-multiple.page eog-3.27.90/help/de/rename-multiple.page --- eog-3.26.2/help/de/rename-multiple.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,90 +0,0 @@ - - - - - - - Automatisches Umbenennen und Nummerieren Ihrer Bilder. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Gleichzeitiges Umbenennen vieler Bilder - -

Falls Sie größere Mengen an Bildern umbenennen wollen, so dass sie einem gewissen Standard folgen:

- - - -

Öffnen Sie die Bildersammlung durch Drücken von F9.

- - -

Wählen Sie alle Bilder in der Bildersammlung aus, die Sie umbenennen wollen. Halten Sie hierzu die Strg-Taste gedrückt und klicken Sie die gewünschten Bilder an.

-

Sie können auch StrgA drücken, um alle Bilder auszuwählen.

- - -

Klicken Sie auf Speichern unter …. Ein Fenster mit verschiedenen Optionen zum Dateinamen wird geöffnet. Nachstehendes Bild zeigt das Fenster.

- - -

Die umbenannten Bilder werden standardmäßig im aktuellen Ordner gespeichert. Um sie an einem anderen Ort zu speichern, wählen Sie den Ort im Auswahlmenü Zielordner aus.

- - -

Verwenden Sie das Feld Dateinamen-Format zum Auswählen eines Benennungsformats für die Bilder. Die Dateinamen-Vorschau zeigt an, wie die Dateinamen aussehen werden. Im nachfolgenden Abschnitt finden Sie Hinweise zur Auswahl der Namen zum Umbenennen von Dateien.

- - -

Stellen Sie sicher, dass im Auswahlfeld Dateinamen-Format der Wert wie bisher angezeigt wird, es sei denn, Sie wollen das Format umwandeln.

- - -

Klicken Sie auf Speichern unter, und die Bilder werden umbenannt.

- - - - - -
- Ein Dateinamensformat wählen -

Die Dateinamen der umbenannten Dateien werden durch die Eingaben im Feld Dateinamen-Format aus.

- - -

Sie können den ursprünglichen Dateinamen beibehalten, indem Sie %f im Feld belassen.

-

Wenn Sie beispielsweise berlin_%f im Feld Dateinamen-Format eingeben, werden die Bilder blume.jpg, haus.jpg und katze.jpg in berlin_blume.jpg, berlin_haus.jpg und berlin_katze.jpg umbenannt.

- - -

Durch Hinzufügen von %n werden die Bilder aufeinander folgend nummeriert, beginnend mit der Zahl, die Sie unter Optionen festlegen können.

-

Wenn Sie beispielsweise sonnenschein_%n im Feld Dateinamen-Format eingeben, werden die Bilder haus.jpg, blume.jpg und katze.jpg in sonnenschein_2.jpg, sonnenschein_1.jpg und sonnenschein_1.jpg umbenannt. Die fortlaufende Nummerierung erfolgt anhand der alphabetischen Reihenfolge der ursprünglichen Dateinamen.

- - -
- - diff -Nru eog-3.26.2/help/de/shortcuts.page eog-3.27.90/help/de/shortcuts.page --- eog-3.26.2/help/de/shortcuts.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,180 +0,0 @@ - - - - - - Liste aller Tastenkombinationen. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Tastenkombinationen - -

Dies ist eine Liste aller Tastenkürzel, die Sie im Bildbetrachter verwenden können.

- -
- Öffnen, Schließen, Speichern und Drucken - - - - - - - - - - - - - - - - - - - - - - - - - -

Eine Bilddatei öffnen

StrgO

Das Bild unter dem gleichen Dateinamen speichern

StrgS

Eine Kopie des Bildes unter einem anderen Dateinamen speichern

UmschalttasteStrgS

Das aktuelle Bild drucken

StrgP

Das aktuelle Fenster schließen

StrgW

Das Bild als Arbeitsflächenhintergrund festlegen

StrgF8

-
- -
- Betrachten von Bildern - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Zum vorherigen Bild im Ordner gehen

Löschtaste / Links

Zum nächsten Bild im Ordner gehen

Leertaste / Rechts

Zum ersten Bild im Ordner gehen

AltPos1

Zum letzten Bild im Ordner gehen

AltEnd

Ein zufälliges Bild im Ordner auswählen

StrgM

Die Bildersammlung anzeigen

F9

Vollbildansicht

F11

Diaschau

F5

Aktuelle Größe

Strg0 (Null)

Einpassen

F

Bewegen in einem großen Bild

AltPfeiltasten

-
- -
- Ein Bild kopieren und in eine andere Anwendung einfügen - - - - - -

Kopieren

StrgC

-
- -
- Ansichtsgröße ändern und Drehen - - - - - - - - - - - - - - - - - -

Ansicht vergrößern

+

Ansicht verkleinern

-

Im Uhrzeigersinn drehen

StrgR

Gegen den Uhrzeigersinn drehen

UmschalttasteStrgR

-
- -
- Weitere - - - - - - - - - - - - - - - - - -

Seitenleiste anzeigen

StrgF9

Bildeigenschaften anzeigen

AltEingabe

Rückgängig machen

StrgZ

Hilfe

F1

-
- diff -Nru eog-3.26.2/help/de/slideshow.page eog-3.27.90/help/de/slideshow.page --- eog-3.26.2/help/de/slideshow.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ - - - - - - - - Klicken Sie auf Diaschau, um alle Bilder in einem Ordner in einer Diaschau anzuzeigen. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Diaschau - -

So betrachten Sie die Bilder in einem Ordner als Diaschau:

- - - -

Öffnen Sie eines der Bilder im Ordner.

- - -

Klicken Sie auf Diaschau oder drücken Sie F5.

-

Eine Diaschau im Vollbildmodus beginnt. In Abständen einiger Sekunden wird ein neues Bild angezeigt. Sie können mit Pfeiltaste links und Pfeiltaste rechts Bilder überspringen, wenn die Diaschau schneller ablaufen soll oder Sie zu einem bereits betrachteten Bild zurückkehren wollen.

- - -

TUm die Diaschau zu beenden, drücken Sie Esc oder F5.

- - - -

Sie können die Einstellungen der Diaschau anpassen, beispielsweise die Zeit für die Anzeige eines Bildes. Weitere Informationen finden Sie in den Diaschau-Einstellungen.

- - diff -Nru eog-3.26.2/help/de/translate.page eog-3.27.90/help/de/translate.page --- eog-3.26.2/help/de/translate.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - So lokalisieren Sie den Bildbetrachter - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Unterstützen Sie uns bei der Übersetzung -

Die Benutzeroberfläche und Dokumentation des Bildbetrachters werden von einer weltweiten Gemeinschaft aus Freiwilligen übersetzt. Sie sind herzlich eingeladen, sich daran zu beteiligen.

-

Es gibt viele Sprachen, für die noch Übersetzungen gesucht werden.

-

Um mit der Übersetzung zu beginnen, müssen Sie zunächst ein Konto erstellen und einem Übersetzungsteam für Ihre Sprache beitreten. So erhalten Sie die Möglichkeit, neue Übersetzungen hochzuladen.

- -

Sie können mit GNOME-Übersetzern im IRC chatten. Die Teilnehmer in diesem Kanal sind über die ganze Welt verstreut, so dass Sie aufgrund der unterschiedlichen Zeitzonen nicht unbedingt sofort eine Antwort erhalten werden.

-

Alternativ können Sie das Internationalisierungsteam über dessen Mailingliste kontaktieren.

- diff -Nru eog-3.26.2/help/de/view.page eog-3.27.90/help/de/view.page --- eog-3.26.2/help/de/view.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,80 +0,0 @@ - - - - - - Drücken Sie die Pfeiltaste links oder Pfeiltaste rechts, um in den Bildern zu blättern, oder verwenden Sie die Bildersammlung, um alle anzuzeigen. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - -Alle Bilder in einem Ordner betrachten - -

Sie können schnell alle Bilder in einem Ordner durchsuchen, indem Sie eines der Bilder öffnen und anschließend auf Nächstes oder Vorheriges rechts und links des angezeigten Bildes klicken (zum Beispiel). Sie können auch eine Bildersammlung mit kleinen Vorschaubildern anzeigen, um alle in einem Ordner enthaltenen Bilder auf einmal sehen zu können.

- -
- Durchsuchen der in einem Ordner enthaltenen Bilder -

Falls ein Ordner mehrere Bilder enthält, können Sie diese Bilder bequem durchsuchen, ohne sie einzeln öffnen zu müssen.

- - -

Öffnen Sie eines der Bilder im Ordner, den Sie durchsuchen wollen.

- - -

Klicken Sie auf Nächstes und Vorheriges links und rechts des angezeigten Bildes oder drücken Sie die Pfeiltaste links und Pfeiltaste rechts, um in den Bildern zu blättern.

-

Wahlweise können Sie die Pfeiltaste hoch und Pfeiltaste runter verwenden oder die Leertaste und die Löschtaste.

- - -

Sie können Bilder im Vollbildmodus durchsuchen, indem Sie in der Titelleiste auf Vollbild klicken oder F11 drücken. Verwenden Sie die Tastatur, um im Vollbildmodus in den Bildern zu blättern.

-

Um zur normalen Ansicht zurückzukehren, drücken Sie Esc oder F11.

- - -
- - - - diff -Nru eog-3.26.2/help/de/zoom.page eog-3.27.90/help/de/zoom.page --- eog-3.26.2/help/de/zoom.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/de/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,66 +0,0 @@ - - - - - - - Das Bild auf dem Bildschirm vergrößern. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Jan Arne Petersen - jpetersen@jpetersen.org - 2006 - - - - Mario Blättermann - mario.blaettermann@gmail.com - 2008, 2010-2012, 2017 - - - - Felix Riemann - friemann@svn.gnome.org - 2009 - - - - Christian Kirbach - Christian.Kirbach@googlemail.com - 2011, 2012, 2014, 2015, 2017 - - - -Ansichtsgröße ändern - -

Sie können die Ansicht vergrößern oder verkleinern, um einen größeren oder kleineren Teil eines Bildes zu sehen. Dies ist sinnvoll, falls Sie ein großes Bild im Ganzen betrachten oder im umgekehrten Fall mehr Einzelheiten sehen wollen.

- - - -

Sie können die Vergrößerungsstufe mit dem Mausrad ändern. Rollen Sie zum Vergrößern nach oben beziehungsweise zum Verkleinern nach unten.

- - -

Das Ändern der Vergrößerung ist auch mit den Knöpfen in der Titelleiste möglich. Um die Ansicht zu vergrößern, klicken Sie auf das Symbol Das Bild vergrößern, oder auf das Symbol Das Bild verkleinern, um die Ansicht zu verkleinern. Diese Symbole sehen wie Plus- und Minus-Zeichen aus.

- - -

Alternativ können Sie die Tastenkombinationen Strg+ oder Strg- verwenden.

- - - -

Um das Bild in seiner originalen, nicht skalierten Größe anzuzeigen, wählen Sie die Vergrößerungsstufe 100% im Auswahlmenü in der Titelleiste. Alternativ können Sie hierzu die Tastenkombinationen Strl0 oder Strg1 verwenden.

- -
- Vergrößerungsstufe an Fenstergröße anpassen -

Sie können die Vergrößerungsstufe so wählen, dass das Bild genau in das Fenster eingepasst wird, selbst wenn Sie die Größe ändern. Klicken Sie hierzu auf Einpassen in der Auswahlliste der Titelleiste.

-
- diff -Nru eog-3.26.2/help/el/bug-filing.page eog-3.27.90/help/el/bug-filing.page --- eog-3.26.2/help/el/bug-filing.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,48 +0,0 @@ - - - - - - Αποστολή σφάλματος στον προβολέα εικόνας. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Αναφορά προβλήματος με τον προβολέα εικόνας -

Ο προβολέας εικόνων συντηρείται από μια εθελοντική κοινότητα. Είσαστε καλοδεχούμενοι να συμμετάσχετε.

- -

Εάν συναντήσετε προβλήματα με τον προβολέα εικόνων (για παράδειγμα, εάν καταρρεύσει ή συμπεριφέρεται αναπάντεχα), ή εάν του λείπει κάποιο γνώρισμα που νομίζετε ότι θα πρέπει να είχε, παρακαλώ στείλτε μια αναφορά σφάλματος με κλικ στον σύνδεσμο . Οι αναφορές σφάλματος είναι ο τρόπος ανίχνευσης προβλημάτων λογισμικού από τους προγραμματιστές έτσι ώστε να μπορούν να τα διορθώσουν.

-

Για να συμμετάσχετε χρειάζεστε έναν λογαριασμό που θα σας δώσει τη δυνατότητα να στείλετε σφάλματα και να κάνετε σχόλια. Επίσης, πρέπει να το καταχωρίσετε έτσι ώστε να μπορείτε να παίρνετε ενημερώσεις με μηνύματα για την κατάσταση του σφάλματος σας. Εάν δεν έχετε ήδη έναν λογαριασμό, κλικ στον σύνδεσμο νέος λογαριασμός για να τον δημιουργήσετε.

-

Αφού έχετε έναν λογαριασμό, συνδεθείτε και κλικ στο αποστολή σφάλματοςπυρήναςeog. Πριν την αναφορά σφάλματος, παρακαλώ διαβάστε τον οδηγό συγγραφής σφάλματος και παρακαλώ περιηγηθείτε για το σφάλμα για να δείτε εάν ήδη υπάρχει.

-

Για αποστολή του σφάλματός σας, επιλέξτε το συστατικό στο μενού συστατικό. Εάν δεν είστε σίγουρος σε ποιο συστατικό αναφέρεται το σφάλμα σας, επιλέξτε γενικά.

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

Στην αναφορά σας θα δοθεί ένας αριθμός ταυτότητας και η κατάστασή της θα ενημερωθεί καθώς θα αντιμετωπιστεί. Τα σφάλματα μπορεί να πάρουν λίγο μέχρι να διορθωθούν και οι προγραμματιστές λογισμικού ίσως σας ζητήσουν παραπέρα πληροφορίες για να βοηθηθούν στην κατανόηση του προβλήματος.

- diff -Nru eog-3.26.2/help/el/commandline.page eog-3.27.90/help/el/commandline.page --- eog-3.26.2/help/el/commandline.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,67 +0,0 @@ - - - - - - Γραμμή εντολών - Η εντολή eog μπορεί να ανοίξει οποιοδήποτε αριθμό εικόνων σε ποικίλες καταστάσεις. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Η γραμμή εντολών - -

Για εκκίνηση του προβολέα εικόνας από το τερματικό, πληκτρολογήστε eog.

-

Μπορείτε να ανοίξετε ένα συγκεκριμένο αρχείο πληκτρολογώντας το όνομα του αρχείου μετά την εντολή eog:

-eog image.jpeg -

Μπορείτε να ανοίξετε ένα συγκεκριμένο φάκελο πληκτρολογώντας το όνομα του φακέλου μετά την εντολή eog:

-φάκελος eog -

Για να δείτε όλες τις εικόνες ανοικτές στον φάκελο, μπορείτε να θελήσετε να περιηγηθείτε στη συλλογή εικόνων.

- -
- Άνοιγμα εικόνας σε κατάσταση πλήρους οθόνης - eog --fullscreen image.jpeg -
- -
- Άνοιγμα εικόνας σε νέο στιγμιότυπο - eog --new-instance image.jpeg -
-
- Άνοιγμα ενός φακέλου σε λειτουργία παρουσίασης - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/el/copy-paste.page eog-3.27.90/help/el/copy-paste.page --- eog-3.26.2/help/el/copy-paste.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - - - Αντιγραφή/επικόλληση από τον προβολέα εικόνας σε άλλη εφαρμογή. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Αντιγραφή και επικόλληση εικόνας -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

Η εικόνα αντιγράφηκε στο πρόχειρο και μπορεί τώρα να επικολληθεί στο έγγραφο LibreOffice, στην εικόνα Gimp ή σε άλλη εφαρμογή.

- - diff -Nru eog-3.26.2/help/el/default.page eog-3.27.90/help/el/default.page --- eog-3.26.2/help/el/default.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - Κάντε τον προβολέα εικόνας την προεπιλεγμένη εφαρμογή για προβολή εικόνων. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Άνοιγμα εικόνων στον προβολέα εικόνας από προεπιλογή -

Εάν θέλετε να κάνετε τον προβολέα εικόνας το προεπιλεγμένο πρόγραμμα που ανοίγει συγκεκριμένους τύπους αρχείου εικόνας:

- - - -

Στο διαχειριστή αρχείων, δεξιό κλικ του αρχείου και επιλέξτε ιδιότητες.

- - -

Μετάβαση στην καρτέλα άνοιγμα με. Μια λίστα των συνιστώμενων εφαρμογών θα εμφανιστεί.

- - -

Επιλέξτε τον προβολέα εικόνας και κλικ στο ορισμός ως προεπιλογή.

-

Εάν ο προβολέας εικόνων δεν είναι στη λίστα των συνιστώμενων εφαρμογών, κλικ στο προβολή άλλων εφαρμογών. Επιλέξτε προβολέας εικόνας από τη λίστα που εμφανίζεται και κλικ ορισμός ως προεπιλογή.

- - -

Κλικ στο κλείσιμο.

- - - -

Στο μέλλον, όταν διπλοπατάτε ένα αρχείο του ίδιου τύπου, θα ανοίγει στον προβολέα εικόνας.

- - diff -Nru eog-3.26.2/help/el/desktop-background.page eog-3.27.90/help/el/desktop-background.page --- eog-3.26.2/help/el/desktop-background.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,42 +0,0 @@ - - - - - - Ορισμός της αγαπημένης σας εικόνας ως επιφάνειας εργασίας παρασκηνίου/ταπετσαρίας. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Ορισμός της τρέχουσας εικόνας ως παρασκήνιο της επιφάνειας εργασίας σας -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

Αυτό θα αλλάξει αμέσα το παρασκήνιο στην εικόνα που προβάλετε. Θα ερωτηθείτε τότε αν θα θέλατε να τροποποιήσετε την εμφάνιση της εικόνας χρησιμοποιώντας το παράθυρο προτιμήσεων παρασκήνιο. Αν πατήσετε απόκρυψη, το μήνυμα θα εξαφανιστεί.

- diff -Nru eog-3.26.2/help/el/develop.page eog-3.27.90/help/el/develop.page --- eog-3.26.2/help/el/develop.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,42 +0,0 @@ - - - - - - Βελτίωση του προβολέα εικόνας - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Βοήθεια στην ανάπτυξη -

Ο προβολέας εικόνων αναπτύσσεται και συντηρείται από μια εθελοντική κοινότητα. Είσαστε καλοδεχούμενοι να συμμετάσχετε.

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/el/documentation.page eog-3.27.90/help/el/documentation.page --- eog-3.26.2/help/el/documentation.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - Συμμετοχή στην ομάδα τεκμηρίωσης. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Βοήθεια συγγραφής τεκμηρίωσης - -

Η τεκμηρίωση του προβολέα εικόνων συντηρείται από μια εθελοντική κοινότητα. Είσαστε καλοδεχούμενοι να συμμετάσχετε.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/el/edit.page eog-3.27.90/help/el/edit.page --- eog-3.26.2/help/el/edit.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,67 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - -Επεξεργασία ή διαγραφή εικόνας - -
Επεξεργασία εικόνας -

Ο προβολέας εικόνας μπορεί να χρησιμοποιηθεί μόνο για προβολή εικόνων· δεν μπορεί να τις επεξεργαστεί. Για αυτό, πρέπει να χρησιμοποιήσετε μια εφαρμογή επεξεργασίας εικόνας, όπως ο επεξεργαστής εικόνας GIMP. Για το άνοιγμα μιας εικόνας για επεξεργασία σε μια διαφορετική εφαρμογή:

- - -

Click Open With, -or right-click on the image.

- - -

Επιλέξτε την επιθυμητή εφαρμογή για επεξεργασία της εικόνας.

- - -

Όταν τελειώσετε την επεξεργασία, αποθηκεύστε την και κλείστε την άλλη εφαρμογή.

- - -

Ο προβολέας εικόνας θα ανιχνεύσει ότι η εικόνα άλλαξε και θα την επαναφορτώσει.

- - -
- -
-Διαγραφή εικόνας -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/el/flip-rotate.page eog-3.27.90/help/el/flip-rotate.page --- eog-3.26.2/help/el/flip-rotate.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,80 +0,0 @@ - - - - - - Οριζόντια/κάθετα, δεξιόστροφα/αριστερόστροφα - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Αναστροφή ή περιστροφή εικόνων - -

Εάν οι εικόνες σας είναι κατά εσφαλμένο τρόπο πάνω-κάτω ή πίσω-μπρος, μπορείτε να τις αναστρέψετε ή να περιστρέψετε έτσι ώστε να φαίνονται σωστά.

- - -
-Αναστροφή εικόνας - -

Κλικ στο επεξεργασία.

 -

Επιλογή είτε οριζόντια αναστροφή ή κάθετη αναστροφή.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Αλλιώς, μην αποθηκεύετε την εικόνα και θα επιστρέψει στον αρχικό της προσανατολισμό την επόμενη φορά που θα την ανοίξετε.

- - -
- -
-Περιστροφή εικόνας - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Αλλιώς, μην αποθηκεύετε την εικόνα και θα επιστρέψει στον αρχικό της προσανατολισμό την επόμενη φορά που θα την ανοίξετε.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Περιστροφή δεξιά

CtrlR

Περιστροφή αριστερά

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/el/format-change.page eog-3.27.90/help/el/format-change.page --- eog-3.26.2/help/el/format-change.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,90 +0,0 @@ - - - - - - Μπορείτε να μετατρέψετε εικόνες από μια μορφή εικόνας σε άλλη. Μπορείτε να το κάνετε σε μια δέσμη για πολλές εικόνες. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Μετατροπή σε διαφορετική μορφή αρχείου - -

Οι εικόνες αποθηκεύονται σε μια ειδική μορφή αρχείου, όπως JPEG ή PNG. Μπορείτε να τις μετατρέψετε από μια μορφή αρχείου σε μια άλλη.

- -
- Μετατροπή μιας μονής εικόνας σε διαφορετική μορφή αρχείου - - -

Click Save As…. The -Save Image window will pop up.

- - -

Στο πεδίο ονόματος, αλλάξτε την επέκταση αρχείου στην επιθυμητή μορφή αρχείου μετατροπής της εικόνας σας. Η επέκταση αρχείου είναι μέρος του ονόματος αρχείου μετά την τελεία.

-

Για παράδειγμα, για μετατροπή ενός αρχείου JPEG (.jpg) σε αρχείο Bitmap (.bmp):

-

αρχικό αρχείο: εικόνα.jpg

-

νέο αρχείο: εικόνα.bmp

- - -

Κλικ στο αποθήκευση και ένα νέο αρχείο θα αποθηκευτεί στη νέα μορφή. Το παλιό αρχείο (στην παλιά μορφή) θα παραμείνει όπου ήταν και δεν θα διαγραφεί.

- - - -

Ο προβολέας εικόνας προσπαθεί να μαντέψει σε ποια μορφή αρχείου να αποθηκεύσει μια εικόνα με βάση την επέκταση του αρχείου που διαλέξατε. Εάν δεν αναγνωρίσει την επέκταση αρχείου που πληκτρολογείτε, ή δεν ξέρετε ποια να χρησιμοποιήσετε, κλικ στο υποστηριζόμενα αρχεία εικόνας στο παράθυρο αποθήκευση εικόνας. Αυτό θα επιτρέψει την επιλογή της μορφής αρχείου από το πτυσσόμενο πλαίσιο.

- -
- -
- Μετατροπή πολλών εικόνων σε διαφορετική μορφή -

Μπορείτε να μετατρέψετε έναν αριθμό εικόνων από μια μορφή αρχείου σε μια άλλη μονομιάς. Αυτό είναι χρήσιμο εάν έχετε πολλές εικόνες που χρειάζονται μετατροπή.

- - -

Στη συλλογή εικόνων, πατήστε και κρατήστε κάτω το πλήκτρο Ctrl και επιλέξτε τις επιθυμητές εικόνες για μετατροπή μια-μια. Εναλλακτικά, πατήστε CtrlA για επιλογή όλων των εικόνων.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

Οι μετατρεπόμενες εικόνες θα αποθηκευτούν στον τρέχοντα φάκελο από προεπιλογή. Για αποθήκευσή τους κάπου αλλού, αλλάξτε τον φάκελο προορισμού.

- - -

Επιλέξτε την επιθυμητή μορφή αρχείου για μετατροπή των εικόνων από την πτυσσόμενη λίστα στα δεξιά του πλαισίου μορφή ονόματος αρχείου.

- - -

Κλικ στο αποθήκευση.

- - -
- - diff -Nru eog-3.26.2/help/el/formats-save.page eog-3.27.90/help/el/formats-save.page --- eog-3.26.2/help/el/formats-save.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - JPEG, PNG, BMP και άλλες. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - - Υποστηριζόμενες μορφές για αποθήκευση εικόνων -

Ο προβολέας εικόνας μπορεί να αποθηκεύσει εικόνες στις παρακάτω μορφές αρχείου:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

Ενδέχεται να αποθηκεύει και άλλους τύπους αρχείων, ανάλογα με τη ρύθμιση του συστήματός.

 - diff -Nru eog-3.26.2/help/el/formats-view.page eog-3.27.90/help/el/formats-view.page --- eog-3.26.2/help/el/formats-view.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Ο προβολέας εικόνας μπορεί να εμφανίσει εικόνες σε μεγάλο εύρος μορφών εικόνας, συμπεριλαμβάνοντας PNG, JPEG και TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - - Υποστηριζόμενοι τύποι εικόνας - -

Ο προβολέας εικόνας μπορεί να ανοίξει εικόνες στις παρακάτω μορφές:

- -

ANI - Κινούμενη εικόνα

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Εικονίδιο Windows

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap από το PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

Εάν δοκιμάσετε να ανοίξετε μια εικόνα σε ανυποστήρικτη μορφή, θα πάρετε ένα σφάλμα αδυναμία φόρτωσης 'image_name' εικόνας..

- diff -Nru eog-3.26.2/help/el/index.page eog-3.27.90/help/el/index.page --- eog-3.26.2/help/el/index.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - Βοήθεια για τον προβολέα εικόνας Μάτι του GNOME. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Προβολέας εικόνας Μάτι του GNOME - Προβολέας εικόνας Μάτι του GNOME - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> Προβολέας εικόνας Μάτι του GNOME -
- Προβολή εικόνων -
- -
- Επεξεργασία εικόνων -
- -
- Εκτύπωση εικόνων -
- -
- Προσθήκη πρόσθετων γνωρισμάτων - -
-
- Προχωρημένα -
- -
- Συχνές ερωτήσεις -
- -
- Συμβουλές και κόλπα -
- -
- Συμμετοχή -
- diff -Nru eog-3.26.2/help/el/introduction.page eog-3.27.90/help/el/introduction.page --- eog-3.26.2/help/el/introduction.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - Καλώς ήρθατε στον προβολέα εικόνας Μάτι του GNOME. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Εισαγωγή - -

Το Eye of GNOME είναι ένας προβολέας εικόνας. Με αυτό, μπορείτε να προβάλετε εικόνες σχεδόν κάθε τύπου. Μπορεί να χειριστεί μεγάλες συλλογές των εικόνων και μπορεί να εμφανίσει μια προβολή σε αλληλουχία. Μπορείτε επίσης να κάνετε βασικές αλλαγές στις εικόνες, όπως περιστροφή ή αναστροφή τους, ή μετατροπή τους σε διαφορετική μορφή αρχείου.

- - diff -Nru eog-3.26.2/help/el/legal.xml eog-3.27.90/help/el/legal.xml --- eog-3.26.2/help/el/legal.xml 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Αυτό το έργο έχει αδειοδοτηθεί υπό την Creative Commons Attribution-Share Alike 3.0 United States License.

-

Ως ειδική εξαίρεση, οι πνευματικοί ιδιοκτήτες σας επιτρέπουν να αντιγράψετε, να τροποποιήσετε και να αναδιανείμετε τα παραδείγματα πηγαίου κώδικα που περιλαμβάνονται σ' αυτό το έγγραφο υπό τους όρους της επιλογής σας, χωρίς περιορισμό.

- diff -Nru eog-3.26.2/help/el/license.page eog-3.27.90/help/el/license.page --- eog-3.26.2/help/el/license.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - - Νομικές πληροφορίες. - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - - Άδεια -

Αυτή η εργασία διανέμεται κάτω από την άδεια της CreativeCommons Attribution-Share Alike 3.0 Unported.

-

Είσαστε ελεύθεροι:

- - - <em>Να μοιραστείτε</em> -

Να αντιγράψετε, να διανείμετε και να μεταφέρετε την εργασία.

- - - <em>Να τροποποιήσετε</em> -

Να προσαρμόσετε την εργασία.

- - -

Κάτω από τους παρακάτω όρους:

- - - <em>Απόδοση</em> -

Πρέπει να αποδώσετε την εργασία κατά τον καθορισμένο τρόπο από τον συγγραφέα ή αδειοδότη (αλλά όχι με οποιοδήποτε τρόπο που προτείνει ότι υποστηρίζουν εσάς ή τη χρήση της εργασίας).

- - - <em>Παρόμοια διανομή</em> -

Εάν αλλάξετε, μετασχηματίσετε ή δημιουργήσετε με βάση αυτήν την εργασία, μπορείτε να διανείμετε την τελική εργασία κάτω από την ίδια, παρόμοια ή συμβατή άδεια.

- - -

Για το πλήρες κείμενο της άδειας, δείτε την ιστοσελίδα CreativeCommons, ή διαβάστε το πλήρες συμβόλαιο Commons.

- diff -Nru eog-3.26.2/help/el/open.page eog-3.27.90/help/el/open.page --- eog-3.26.2/help/el/open.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/el/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Άνοιγμα εικόνων σε νέο παράθυρο. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - - -Άνοιγμα εικόνας - -

Οι εικόνες πρέπει να ανοίγουν αυτόματα στον προβολέα εικόνας με διπλό κλικ στον περιηγητή αρχείου των αρχείων. Εάν αυτό δεν συμβαίνει, ίσως χρειαστεί να κάνετε τον προβολέα εικόνας την προεπιλεγμένη εφαρμογή για προβολή εικόνων.

- -

Κάθε εικόνα με διπλό κλικ θα ανοίξει σε ένα νέο παράθυρο προβολέα εικόνας από προεπιλογή, αλλά μπορείτε να προβάλετε πολλές εικόνες σε ένα παράθυρο εάν θέλετε.

- -

Μπορείτε επίσης να ανοίξετε εικόνες μέσα από τον ίδιο τον προβολέα εικόνας:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Επιλέξτε την επιθυμητή εικόνα για άνοιγμα και κλικ στο άνοιγμα.

 - - - diff -Nru eog-3.26.2/help/el/plugin-exif-digital.page eog-3.27.90/help/el/plugin-exif-digital.page --- eog-3.26.2/help/el/plugin-exif-digital.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,103 +0,0 @@ - - - - - - Προβολή πληροφοριών όπως ρυθμίσεις κάμερας και ιστόγραμμα, γεωτοποθεσία και ημερομηνία. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Προβολή λεπτομερών πληροφοριών για μια εικόνα - -

Εικόνες που πάρθηκαν με ψηφιακές κάμερες αποθηκεύονται με έναν οικοδεσπότη πρόσθετων πληροφοριών ενσωματωμένο σε αυτές, όπως ημερομηνία λήψης, ρυθμίσεις έκθεσης και σε κάποιες περιπτώσεις, ακόμα και τοποθεσία λήψης.

- -

Αυτό το θέμα εμφανίζει πώς θα προσπελάσετε αυτές τις πληροφορίες.

- -
-Προβολή της ημερομηνίας στη γραμμή κατάστασης - -

Μπορείτε να εμφανίσετε την ημερομηνία λήψης της εικόνας στη γραμμή κατάστασης στον πυθμένα του παραθύρου.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Λεπτομερή δεδομένα Exif -

Οι λεπτομερείς αποθηκευμένες πληροφορίες με ψηφιακές φωτογραφίες λέγονται δεδομένα Exif. Μπορείτε να τις προβάλετε εγκαθιστώντας ένα πρόσθετο για τον προβολέα εικόνας.

- - - -

Για να ενεργοποιήσετε αυτό το γνώρισμα, θα χρειαστείτε να έχετε εγκαταστήσει το πρόσθετα eog.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

Μπορείτε επίσης να δείτε τις ρυθμίσεις της κάμερας που χρησιμοποιούνται για τη λήψη μιας φωτογραφίας στη μπάρα κατάστασης. Επιλέξτε προβολή Exif στη καρτέλα πρόσθετα και κάντε κλικ στις προτιμήσεις. Επιλέξτε προβολή ρυθμίσεων κάμερας στη μπάρα κατάστασης.

- - -
- -
- Εμφάνιση ενός χάρτη τοποθεσίας φωτογραφίας -

Μερικές κάμερες μπορούν να επισυνάψουν πληροφορίες γεωτοποθεσίας (γεωετικέτες) σε ψηφιακές φωτογραφίες. Οι γεωετικέτες είναι συνήθως απλώς οι συντεταγμένες GPS (γεωγραφικό πλάτος και μήκος) για την τοποθεσία λήψης μιας φωτογραφίας.

- - - -

Για να ενεργοποιήσετε αυτό το γνώρισμα, θα χρειαστείτε να έχετε εγκαταστήσει το πρόσθετα eog.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

Ο χάρτης θα εμφανίσει την τοποθεσία λήψης της εικόνας μόνο εάν υπάρχουν πληροφορίες γεωτοποθεσίας προσαρτημένες στη φωτογραφία. Πολλές κάμερες δεν επισυνάπτουν πληροφορίες γεωτοποθεσίας στις εικόνες.

-
- - - diff -Nru eog-3.26.2/help/el/plugin-fullscreen-background.page eog-3.27.90/help/el/plugin-fullscreen-background.page --- eog-3.26.2/help/el/plugin-fullscreen-background.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Ενεργοποιεί την αλλαγή του χρώματος παρασκηνίου στη λειτουργία πλήρους οθόνης. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Αλλαγή χρώματος παρασκηνίου στην πλήρη οθόνη - -

Αν θέλετε, μπορείτε να αλλάξετε το χρώμα του παρασκηνίου στη λειτουργία πλήρους οθόνης.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Τώρα, στην λειτουργία πλήρους οθόνης, το χρώμα του παρασκηνίου είναι αυτό που επιλέξατε.

- -

Για να ενεργοποιήσετε αυτό το γνώρισμα, θα χρειαστείτε να έχετε εγκαταστήσει το πρόσθετα eog.

- - diff -Nru eog-3.26.2/help/el/plugin-fullscreen-double-click.page eog-3.27.90/help/el/plugin-fullscreen-double-click.page --- eog-3.26.2/help/el/plugin-fullscreen-double-click.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - Ενεργοποίηση της κατάστασης πλήρους οθόνης με διπλό κλικ στην εικόνα. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Πλήρης οθόνη με διπλό-κλικ - - - -

Εάν θέλετε, μπορείτε να το κάνετε έτσι ώστε οι εικόνες να εμφανίζονται σε πλήρη οθόνη, όταν τις διπλοπατάτε στον προβολέα εικόνας.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Τώρα, διπλό κλικ σε μια εικόνα θα εναλλάξει μεταξύ πλήρους οθόνης και κανονικής κατάστασης (παραθύρου).

- - diff -Nru eog-3.26.2/help/el/plugin-picasa.page eog-3.27.90/help/el/plugin-picasa.page --- eog-3.26.2/help/el/plugin-picasa.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - Εύκολη αποστολή εικόνων στο PicasaWeb απευθείας από τον προβολέα εικόνων. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Αποστολή φωτογραφιών στο <app>PicasaWeb</app> - -

Το PicasaWeb είναι μια υπηρεσία φωτογραφικού λευκώματος που επιτρέπει τον μερισμό εικόνων με συνδεμένα άτομα. Μπορείτε να προσθέσετε μια συντόμευση που θα σας δώσει την ευχέρεια να φορτώσετε φωτογραφίες στο PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

Για να ενεργοποιήσετε αυτό το γνώρισμα, θα χρειαστείτε να έχετε εγκαταστήσει το πρόσθετα eog.

- - diff -Nru eog-3.26.2/help/el/plugin-python-console.page eog-3.27.90/help/el/plugin-python-console.page --- eog-3.26.2/help/el/plugin-python-console.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,59 +0,0 @@ - - - - - - Η κονσόλα Python μπορεί να χρησιμοποιηθεί για προσθήκη πρόσθετων λειτουργιών και εκτέλεση σεναρίων στον προβολέα εικόνας. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Κονσόλα Python - -

Ο προβολέας εικόνας έχει ένα σύστημα προσθέτου που χρησιμοποιεί τη γλώσσα σεναρίου Python. Εάν ενεργοποιήσετε την κονσόλα Python, μπορείτε να κερδίσετε άμεση πρόσβαση σε έναν διερμηνευτή Python μέσα από τον προβολέα εικόνας, που μπορείτε να χρησιμοποιήσετε μετά για εγγραφή σεναρίων ή προγραμματιστικό χειρισμό εικόνων, για παράδειγμα.

- - - -

Για να ενεργοποιήσετε αυτό το γνώρισμα, θα χρειαστείτε να έχετε εγκαταστήσει το πρόσθετα eog.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Σημειώστε κονσόλα Python και κλικ στο κλείσιμο.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/el/plugin-send-by-mail.page eog-3.27.90/help/el/plugin-send-by-mail.page --- eog-3.26.2/help/el/plugin-send-by-mail.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Εύκολη αποστολή εικόνων προσαρτώντας τες σε ένα νέο μήνυμα. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Αποστολή εικόνων με μήνυμα - -

Μπορείτε να προσθέσετε ένα κουμπί που παρέχει έναν βολικό τρόπο αποστολής εικόνων σε ανθρώπους με μήνυμα.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

Για να ενεργοποιήσετε αυτό το γνώρισμα, θα χρειαστείτε να έχετε εγκαταστήσει το πρόσθετα eog.

- - -

Μήνυμα Evolution πρέπει να εγκατασταθεί για σύνδεση με τον λογαριασμό σας αλληλογραφίας για να δουλέψει αυτό.

- - - - - diff -Nru eog-3.26.2/help/el/plugin-slideshow-shuffle.page eog-3.27.90/help/el/plugin-slideshow-shuffle.page --- eog-3.26.2/help/el/plugin-slideshow-shuffle.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,48 +0,0 @@ - - - - - - - Προβολή φωτογραφιών σε τυχαία σειρά όταν εμφανίζεται μια προβολή σε αλληλουχία. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Ανάμειξη προβολής σε αλληλουχία - -

Μπορείτε να το κάνετε έτσι ώστε οι εικόνες να εμφανίζονται σε τυχαία σειρά όταν ξεκινάτε μια προβολή σε αλληλουχία.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

Για να ενεργοποιήσετε αυτό το γνώρισμα, θα χρειαστείτε να έχετε εγκαταστήσει το πρόσθετα eog.

- - diff -Nru eog-3.26.2/help/el/plugins.page eog-3.27.90/help/el/plugins.page --- eog-3.26.2/help/el/plugins.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,94 +0,0 @@ - - - - - - Εγκατάσταση προσθέτων για πρόσβαση πρόσθετων γνωρισμάτων. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Πρόσθετα - -

Μπορείτε να εγκαταστήσετε το πακέτο πρόσθετα eog για να πάρετε επιπλέον πρόσθετα για τον προβολέα εικόνας. Τα πρόσθετα δίνουν επιπλέον γνωρίσματα, όπως αυτά που αναφέρονται παρακάτω.

- - -

Μπορείτε να εγκαταστήσετε το πακέτο πρόσθετα eog χρησιμοποιώντας τον διαχειριστή πακέτου της διανομής σας Linux.

- - - -

Εγκατάσταση eog-plugins

- - - - -

Τα παρακάτω γνωρίσματα περιλαμβάνονται στα πρόσθετα eog:

- - - -

Ημερομηνία στη μπάρα κατάστασης: εμφανίζει την ημερομηνία της εικόνας στη μπάρα κατάστασης του παραθύρου.

- - -

εμφάνιση Exif: εμφανίζει τις ρυθμίσεις κάμερας και ιστογράμματα για ψηφιακές φωτογραφίες.

- - -

Παρασκήνιο πλήρους οθόνης: Ενεργοποιεί την αλλαγή παρασκηνίου σε λειτουργία πλήρους οθόνης.

- - -

Πλήρης οθόνη με διπλό-κλικ: Ενεργοποιεί τη λειτουργία πλήρους οθόνης.

- - -

χάρτης: εμφανίζει τη γεωτοποθεσία μιας ψηφιακής φωτογραφίας ενός χάρτη.

- - -

Φορτωτής PicasaWeb: ανέβασμα των εικόνων σας στο PicasaWeb.

- - -

Κονσόλα πάιθον: μια κονσόλα σεναρίου πάιθον για τον προβολέα εικόνας.

- - -

Αποστολή με αλληλογραφία: αποστολή μιας εικόνας σε φίλο επικολλώντας την σε νέα ηλ. αλληλογραφία.

- - -

Ανάμειξη προβολής σε αλληλουχία: ανακατεύει εικόνες σε κατάσταση προβολής διαφανειών.

- - -

Εστίαση για προσαρμογή πλάτους εικόνας: ρυθμίζει την εστίαση για προσαρμογή πλήρους πλάτους της εικόνας στο παράθυρο.

- - - - -

Μπορείτε να διαχειριστείτε πρόσθετα χρησιμοποιώντας την καρτέλα προσθέτων στο παράθυρο προτιμήσεων.

- - - diff -Nru eog-3.26.2/help/el/plugin-zoom-width.page eog-3.27.90/help/el/plugin-zoom-width.page --- eog-3.26.2/help/el/plugin-zoom-width.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - Ρυθμίζει την εστίαση για προσαρμογή πλήρους πλάτους της εικόνας στο παράθυρο. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Εστίαση για προσαρμογή πλάτους εικόνας - -

Ενεργοποιήστε το πρόσθετο εστίαση για προσαρμογή πλάτους εικόνας, εάν θέλετε οι εικόνες να επεκταθούν για να γεμίσουν το πλήρες πλάτος του παραθύρου.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

Για να προσθέσετε αυτή τη λειτουργικότητα, θα χρειαστείτε να έχετε εγκαταστήσει το πρόσθετα eog.

- - diff -Nru eog-3.26.2/help/el/preferences.page eog-3.27.90/help/el/preferences.page --- eog-3.26.2/help/el/preferences.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,105 +0,0 @@ - - - - - - Προβολή εικόνας, προβολή σε αλληλουχία και πρόσθετα. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Προτιμήσεις -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Προτιμήσεις προβολής εικόνας - - - - Βελτιώσεις εικόνας -

Επιλέξτε ομαλές εικόνες όταν σμικρύνετε για να ενεργοποιήσετε την εξομάλυνση εικόνας όταν μεγεθύνετε ή σμικρύνετε. Αυτό κάνει τις εικόνες χαμηλής ανάλυσης (με δόντια) να φαίνονται καλύτερες με εξομάλυνση των οδοντωτών άκρων.

-

Εάν ενεργοποιήσετε αυτόματος προσανατολισμός, οι εικόνες θα περιστρέφονται αυτόματα σύμφωνα με τα μεταδεδομένα τους Exif. Αυτά είναι πληροφορίες για μια εικόνα που εισάγεται αυτόματα από ψηφιακή κάμερα και μπορεί να συμπεριλάβει λεπτομέρειες με ποιο τρόπο η κάμερα κρατήθηκε όταν παιρνόταν η φωτογραφία. Για παράδειγμα, όταν ενεργοποιηθεί ο αυτόματος προσανατολισμός, οι φωτογραφίες πορτρέτου περιστρέφονται αυτόματα όρθια. Η περιστροφή δεν αποθηκεύεται μέχρι να αποθηκεύσετε την περιστραμμένη εικόνα.

-

Ο αυτόματος προσανατολισμός δεν δουλεύει με όλες τις εικόνες· μόνο εικόνες που πάρθηκαν χρησιμοποιώντας μια κάμερα που αποθηκεύει μεταδεδομένα προσανατολισμού Exif θα περιστραφεί.

- - - Διαφανή μέρη -

Επιλέξτε μια από τις παρακάτω επιλογές για να καθορίσετε το πώς τα διαφανή μέρη μιας εικόνας θα εμφανίζονται, εάν έχει διαφανή μέρη:

- - -

Ως μοτίβο τετραγωνιδίων:

-

Εμφανίζει όλα τα διαφανή μέρη της εικόνας σε ένα μοτίβο τετραγωνιδίων.

- - -

Ως προσαρμοσμένο χρώμα:

-

Εμφανίζει όλα τα διαφανή μέρη της εικόνας σε ένα συμπαγές χρώμα που ορίζετε, με κλικ στο κουμπί επιλογέα χρώματος.

- - -

Ως παρασκήνιο:

-

Εμφανίζει οποιοδήποτε διαφανή μέρη της εικόνας στο χρώμα παρασκηνίου, εάν το ως προσαρμοσμένο χρώμα στο παρασκήνιο σημειωθεί. Αλλιώς, το προεπιλεγμένο χρώμα παρασκηνίου χρησιμοποιείται.

- - - - -
- - -
-Προτιμήσεις προβολής διαφανειών - -

Για προσαρμογή των ρυθμίσεων της προβολής σε αλληλουχία:

- - -

Στο εστίαση εικόνας μπορείτε να επιλέξετε εάν θα θέλατε οι εικόνες που είναι μικρότερες από την οθόνη να επεκταθούν έτσι ώστε να προσαρμόζονται στην οθόνη.

- - -

Στο σειρά μπορείτε να επιλέξετε πόσα δευτερόλεπτα κάθε εικόνα θα εμφανίζεται (μεταξύ 1 και 100) πριν να προβληθεί η επόμενη εικόνα.

- - -

Σημειώστε κυκλική σειρά εάν θέλετε η προβολή σε αλληλουχία να επαναλαμβάνεται συνεχώς. Εάν αποσημειωθεί, η προβολή σε αλληλουχία θα ξεκινήσει από την επιλεγμένη εικόνα και θα τελειώσει με την τελευταία εικόνα του φακέλου.

- - -
- - -
-Προτιμήσεις προσθέτου - - - - -

Εδώ μπορείτε να σημειώσετε/αποσημειώσετε οποιαδήποτε πρόσθετα γνωρίσματα που θα θέλατε να ενεργοποιήσετε ή να απενεργοποιήσετε. Η εικόνα στα αριστερά δείχνει τα διαθέσιμα από προεπιλογή πρόσθετα.

- -

Μπορείτε επίσης να θέλετε να εγκαταστήσετε το πακέτο προσθέτων eog, που περιέχει πρόσθετα που δίνουν έναν αριθμό πρόσθετων γνωρισμάτων. Μετά την εγκατάσταση του, θα μπορείτε να ενεργοποιήσετε τα επιπλέον πρόσθετα, όπως αυτά εμφανίζονται στην εικόνα στα δεξιά.

-
- - diff -Nru eog-3.26.2/help/el/print.page eog-3.27.90/help/el/print.page --- eog-3.26.2/help/el/print.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Εκτύπωση εικόνας - -

Για εκτύπωση της εικόνας που βλέπετε τώρα:

- - - -

Click Print….

- - -

Στην καρτέλα γενικά , επιλέξτε τον εκτυπωτή που θέλετε να χρησιμοποιήσετε και τον αριθμό των αντιγράφων που θέλετε να εκτυπώσετε.

- - -

Εάν μεταβείτε στην καρτέλα ρυθμίσεις εικόνας, μπορείτε να ρυθμίσετε τη θέση και το μέγεθος της εικόνας.

-

Είναι επίσης δυνατό να ρυθμίσετε την θέση της εικόνας στην σελίδα σύροντας την ολόγυρα στην προεπισκόπηση.

- - -

Εάν χρησιμοποιείτε υψηλής ποιότητας φωτογραφικό χαρτί, μεταβείτε στην καρτέλα διαμόρφωση σελίδας και επιλέξτε τον σωστό τύπο χαρτιού. Θα πρέπει επίσης να πάτε στην καρτέλα ποιότητα εικόνας και να επιλέξτε μια ρύθμιση υψηλής ποιότητας, έτσι ώστε να πάρετε την βέλτιστη δυνατή φωτογραφική ποιότητα.

- - -

Κλικ στο εκτύπωση.

- - - -

Σημειώστε ότι μερικές από τις καρτέλες που αναφέρθηκαν παραπάνω δεν εμφανίζονται για συγκεκριμένους τύπους εκτυπωτών. Αυτό συμβαίνει γιατί οι οδηγοί εκτυπωτών για αυτούς τους εκτυπωτές δεν επιτρέπουν την αλλαγή κάποιων ρυθμίσεων. Έτσι, για παράδειγμα, εάν δεν βλέπετε την καρτέλα ποιότητα εικόνας, αυτό προφανώς σημαίνει ότι οι οδηγοί εκτυπωτή που χρησιμοποιούνται δεν υποστηρίζουν αυτές τις ρυθμίσεις.

- - diff -Nru eog-3.26.2/help/el/rename-multiple.page eog-3.27.90/help/el/rename-multiple.page --- eog-3.26.2/help/el/rename-multiple.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - - Αυτόματη μετονομασία και αριθμός δεσμών εικόνων. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Μετονομασία πολλών εικόνων μονομιάς - -

Εάν έχετε πολλές εικόνες που θέλετε να μετονομάσετε, ίσως για να έχουν μια τυπική αριθμημένη μορφή ονόματος:

- - - -

Ανοίξτε την συλλογή εικόνων πατώντας F9.

- - -

Επιλογή όλων των εικόνων που θέλετε να μετονομάσετε από τη συλλογή εικόνων κρατώντας πατημένο το Ctrl και πατώντας τες μία προς μία.

-

Εναλλακτικά, πατήστε CtrlA για επιλογή όλων των εικόνων.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

Οι μετονομασμένες εικόνες θα αποθηκευτούν στον τρέχοντα φάκελο από προεπιλογή. Για αποθήκευσή τους κάπου αλλού, αλλάξτε τον φάκελο προορισμού.

- - -

Χρησιμοποιήστε το πλαίσιο μορφή ονόματος αρχείου για επιλογή μορφής ονομασίας για τις εικόνες. Η προεπισκόπηση ονόματος αρχείου εμφανίζει πώς θα φαίνονται τα ονόματα των αρχείων. Δείτε την ενότητα, παρακάτω, για συμβουλές στην επιλογή μετονομασίας των αρχείων.

- - -

Βεβαιωθείτε ότι η πτυσσόμενη λίστα μορφή ονόματος αρχείου λέει όπως είναι, εκτός και θέλετενα μετατρέψετε τις εικόνες σε διαφορετική μορφή αρχείου.

- - -

Κλικ στο αποθήκευση ως και οι εικόνες θα μετονομαστούν.

- - - - - -
- Επιλογή μορφής ονόματος αρχείου -

Τα ονόματα αρχείου των μετονομασμένων αρχείων προσδιορίζονται από το τι βάζετε στο πλαίσιο μορφή ονόματος αρχείου.

- - -

Μπορείτε να κρατήσετε το αρχικό όνομα αρχείου ως μέρος του νέου ονόματος αρχείου αφήνοντας το %f στο πλαίσιο.

-

Για παράδειγμα, εάν πληκτρολογήσετε paris_%f στο πλαίσιο μορφή ονόματος αρχείου, οι εικόνες που λέγονται flower.jpg, house.jpg και cat.jpg θα μετονομαστούν σε paris_flower.jpg, paris_house.jpg και paris_cat.jpg.

- - -

Η προσθήκη ενός %n θα αριθμήσει τις εικόνες διαδιχικά, αρχίζοντας από τον αριθμό μέτρησης που διαλέξατε στο επιλογές.

-

Για παράδειγμα, εάν πληκτρολογήσετε sunshine_%n στο πλαίσιο μορφή ονόματος αρχείου, οι εικόνες που λέγονται flower.jpg, house.jpg και cat.jpg θα μετονομαστούν σε sunshine_2.jpg, sunshine_3.jpg και sunshine_1.jpg. (θα αριθμηθούν κατά αλφαβητική σειρά των αρχικών ονομάτων αρχείων.)

- - -
- - diff -Nru eog-3.26.2/help/el/shortcuts.page eog-3.27.90/help/el/shortcuts.page --- eog-3.26.2/help/el/shortcuts.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,174 +0,0 @@ - - - - - - Μια λίστα όλων των συντομεύσεων πληκτρολογίου. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Συντομεύσεις πληκτρολογίου - -

Αυτή είναι μια λίστα όλων των συντομεύσεων πληκτρολογίου που μπορείτε να χρησιμοποιήσετε στον προβολέα εικόνας.

- -
- Άνοιγμα, κλείσιμο, αποθήκευση και εκτύπωση - - - - - - - - - - - - - - - - - - - - - - - - - -

Άνοιγμα ενός αρχείου εικόνας

CtrlO

Αποθήκευση της εικόνας με το ίδιο όνομα αρχείου

CtrlS

Αποθήκευση αντιγράφου της τρέχουσας εικόνας με ένα νέο όνομα αρχείου

ShiftCtrlS

Εκτύπωση μιας τρέχουσας εικόνας

CtrlP

Κλείσιμο του τρέχοντος παραθύρου

CtrlW

Ορισμός της εικόνας ως παρασκηνίου της επιφάνειας εργασίας σας

CtrlF8

-
- -
- Προβολή εικόνων - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Μετάβαση στην προηγούμενη εικόνα στον φάκελο

οπισθοδιαγραφή / αριστερό βέλος

Μετάβαση στην επόμενη εικόνα στον φάκελο

πλήκτρο διαστήματος / δεξιό βέλος

Μετάβαση στην πρώτη εικόνα στον φάκελο

AltHome

Μετάβαση στην τελευταία εικόνα στον φάκελο

AltEnd

Επιλογή τυχαίας εικόνας στον φάκελο

CtrlM

Προβολή της συλλογή εικόνων

F9

Προβολή πλήρους οθόνης

F11

Εμφάνιση προβολής σε αλληλουχία

F5

Ενεργό μέγεθος

Ctrl0 (μηδέν)

Καλύτερο ταίριασμα

F

Κύλιση γύρω από μια μεγάλη εικόνα

Altπλήκτρα βέλων

-
- -
- Αντιγραφή εικόνας για επικόλληση σε άλλη εφαρμογή - - - - - -

Αντιγραφή

CtrlC

-
- -
- Εστίαση και περιστροφή - - - - - - - - - - - - - - - - - -

Μεγέθυνση

+

Σμίκρυνση

-

Περιστροφή δεξιά

CtrlR

Περιστροφή αριστερά

ShiftCtrlR

-
- -
- Άλλο - - - - - - - - - - - - - - - - - -

Προβολή πλευρικής στήλης

CtrlF9

Προβολή ιδιοτήτων εικόνας

AltReturn

Αναίρεση

CtrlZ

Βοήθεια

F1

-
- diff -Nru eog-3.26.2/help/el/slideshow.page eog-3.27.90/help/el/slideshow.page --- eog-3.26.2/help/el/slideshow.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,59 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Προβολή σε αλληλουχία - -

Για να προβάλλετε όλες τις εικόνες σε ένα φάκελο ως προβολή σε αλληλουχία:

- - - -

Άνοιγμα μιας εικόνας από τον φάκελο.

- - -

Click Slideshow or press - F5.

-

Μια προβολή σε αλληλουχία πλήρους οθόνης θα αρχίσει. Κάθε λίγα δευτερόλεπτα μια νέα εικόνα θα εμφανίζεται. Εάν θα θέλατε να κινηθείτε μέσα από την προβολή σε αλληλουχία πιο γρήγορα, ή να επιστρέψετε σε μια εικόνα που έχει ήδη εμφανιστεί, μπορείτε να χρησιμοποιήσετε τα πλήκτρα βελών αριστερό και δεξιό για χειροκίνητη μετακίνηση προς τα πίσω και προς τα μπρος.

- - -

Για έξοδο της προβολής σε αλληλουχία, πατήστε Esc ή F5.

- - - -

Μπορείτε να αλλάξετε τις ρυθμίσεις της προβολής σε αλληλουχία όπως πόσο θα εμφανίζεται κάθε εικόνα. Δείτε το θέμα στο προτιμήσεις προβολής σε αλληλουχία για περισσότερες πληροφορίες.

- - diff -Nru eog-3.26.2/help/el/translate.page eog-3.27.90/help/el/translate.page --- eog-3.26.2/help/el/translate.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,52 +0,0 @@ - - - - - - Εντοπισμός του προβολέα εικόνων - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Βοήθεια στη μετάφραση -

Η διεπαφή χρήστη και η τεκμηρίωση του προβολέα εικόνων μεταφράζονται από μια παγκόσμια εθελοντική κοινότητα. Είσαστε καλοδεχούμενοι να συμμετάσχετε.

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

Μπορείτε να συζητήσετε με μεταφραστές του GNOME χρησιμοποιώντας το irc. Άνθρωποι στο κανάλι βρίσκονται παντού, έτσι μπορείτε να πάρετε μια άμεση απάντηση ως αποτέλεσμα των διαφορών ώρας.

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/el/view.page eog-3.27.90/help/el/view.page --- eog-3.26.2/help/el/view.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,82 +0,0 @@ - - - - - - Πατήστε αριστερά και δεξιά για εναλλαγή μεταξύ εικόνων, ή χρησιμοποιήστε τη συλλογή εικόνων για να τις εμφανίσετε όλες. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - -Προβολή όλων των εικόνων σε ένα φάκελο - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Περιήγηση μέσα από όλες τις εικόνες σε έναν φάκελο -

Εάν έχετε έναν φάκελο που περιέχει πολλές εικόνες, μπορείτε να περιηγηθείτε άνετα μέσα από όλες τις εικόνες χωρίς να πρέπει να τις ανοίξετε ατομικά.

- - -

άνοιγμα οποιασδήποτε εικόνας από τον φάκελο θέλετε να περιηγηθείτε.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

Για επιστροφή σε κανονική προβολή, πατήστε Esc ή F11.

- - -
- - - - diff -Nru eog-3.26.2/help/el/zoom.page eog-3.27.90/help/el/zoom.page --- eog-3.26.2/help/el/zoom.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/el/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Φώτης Τσάμης - ftsamis@gmail.com - 2009 - - - - Μάριος Ζηντίλης - m.zindilis@dmajor.org - 2009 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2012, 2013 - - - -Εστίαση - -

Μπορείτε να μεγεθύνετε και να σμικρύνετε για εμφάνιση περισσότερης ή λιγότερης εικόνας στην οθόνη μονομιάς. Αυτό είναι χρήσιμο εάν θέλετε να δείτε μια μεγάλη εικόνα στο σύνολό της, ή εάν θέλετε να επιθεωρήσετε τις λεπτές λεπτομέρειες μιας εικόνας.

- - - -

Μπορείτε να εστιάσετε χρησιμοποιώντας τον τροχό του ποντικιού. Επάνω κύλιση για μεγέθυνση και κάτω κύλιση για σμίκρυνση.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Εστίαση για βέλτιστη προσαρμογή του παραθύρου -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/en_GB/bug-filing.page eog-3.27.90/help/en_GB/bug-filing.page --- eog-3.26.2/help/en_GB/bug-filing.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/en_GB/commandline.page eog-3.27.90/help/en_GB/commandline.page --- eog-3.26.2/help/en_GB/commandline.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/en_GB/copy-paste.page eog-3.27.90/help/en_GB/copy-paste.page --- eog-3.26.2/help/en_GB/copy-paste.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/en_GB/default.page eog-3.27.90/help/en_GB/default.page --- eog-3.26.2/help/en_GB/default.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/en_GB/desktop-background.page eog-3.27.90/help/en_GB/desktop-background.page --- eog-3.26.2/help/en_GB/desktop-background.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/en_GB/develop.page eog-3.27.90/help/en_GB/develop.page --- eog-3.26.2/help/en_GB/develop.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/en_GB/documentation.page eog-3.27.90/help/en_GB/documentation.page --- eog-3.26.2/help/en_GB/documentation.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/en_GB/edit.page eog-3.27.90/help/en_GB/edit.page --- eog-3.26.2/help/en_GB/edit.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/en_GB/flip-rotate.page eog-3.27.90/help/en_GB/flip-rotate.page --- eog-3.26.2/help/en_GB/flip-rotate.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/en_GB/format-change.page eog-3.27.90/help/en_GB/format-change.page --- eog-3.26.2/help/en_GB/format-change.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/en_GB/formats-save.page eog-3.27.90/help/en_GB/formats-save.page --- eog-3.26.2/help/en_GB/formats-save.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/en_GB/formats-view.page eog-3.27.90/help/en_GB/formats-view.page --- eog-3.26.2/help/en_GB/formats-view.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - Animation

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Windows Icon

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap from the PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/en_GB/index.page eog-3.27.90/help/en_GB/index.page --- eog-3.26.2/help/en_GB/index.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/en_GB/introduction.page eog-3.27.90/help/en_GB/introduction.page --- eog-3.26.2/help/en_GB/introduction.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Introduction - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/en_GB/legal.xml eog-3.27.90/help/en_GB/legal.xml --- eog-3.26.2/help/en_GB/legal.xml 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/en_GB/license.page eog-3.27.90/help/en_GB/license.page --- eog-3.26.2/help/en_GB/license.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/en_GB/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/en_GB/open.page eog-3.27.90/help/en_GB/open.page --- eog-3.26.2/help/en_GB/open.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/en_GB/plugin-exif-digital.page eog-3.27.90/help/en_GB/plugin-exif-digital.page --- eog-3.26.2/help/en_GB/plugin-exif-digital.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/en_GB/plugin-fullscreen-background.page eog-3.27.90/help/en_GB/plugin-fullscreen-background.page --- eog-3.26.2/help/en_GB/plugin-fullscreen-background.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/en_GB/plugin-fullscreen-double-click.page eog-3.27.90/help/en_GB/plugin-fullscreen-double-click.page --- eog-3.26.2/help/en_GB/plugin-fullscreen-double-click.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/en_GB/plugin-picasa.page eog-3.27.90/help/en_GB/plugin-picasa.page --- eog-3.26.2/help/en_GB/plugin-picasa.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/en_GB/plugin-python-console.page eog-3.27.90/help/en_GB/plugin-python-console.page --- eog-3.26.2/help/en_GB/plugin-python-console.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/en_GB/plugin-send-by-mail.page eog-3.27.90/help/en_GB/plugin-send-by-mail.page --- eog-3.26.2/help/en_GB/plugin-send-by-mail.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/en_GB/plugin-slideshow-shuffle.page eog-3.27.90/help/en_GB/plugin-slideshow-shuffle.page --- eog-3.26.2/help/en_GB/plugin-slideshow-shuffle.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/en_GB/plugins.page eog-3.27.90/help/en_GB/plugins.page --- eog-3.26.2/help/en_GB/plugins.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/en_GB/plugin-zoom-width.page eog-3.27.90/help/en_GB/plugin-zoom-width.page --- eog-3.26.2/help/en_GB/plugin-zoom-width.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/en_GB/preferences.page eog-3.27.90/help/en_GB/preferences.page --- eog-3.26.2/help/en_GB/preferences.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Preferences -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

Displays any transparent parts of the image in a check pattern.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/en_GB/print.page eog-3.27.90/help/en_GB/print.page --- eog-3.26.2/help/en_GB/print.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/en_GB/rename-multiple.page eog-3.27.90/help/en_GB/rename-multiple.page --- eog-3.26.2/help/en_GB/rename-multiple.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/en_GB/shortcuts.page eog-3.27.90/help/en_GB/shortcuts.page --- eog-3.26.2/help/en_GB/shortcuts.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/en_GB/slideshow.page eog-3.27.90/help/en_GB/slideshow.page --- eog-3.26.2/help/en_GB/slideshow.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/en_GB/translate.page eog-3.27.90/help/en_GB/translate.page --- eog-3.26.2/help/en_GB/translate.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/en_GB/view.page eog-3.27.90/help/en_GB/view.page --- eog-3.26.2/help/en_GB/view.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/en_GB/zoom.page eog-3.27.90/help/en_GB/zoom.page --- eog-3.26.2/help/en_GB/zoom.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/en_GB/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/es/bug-filing.page eog-3.27.90/help/es/bug-filing.page --- eog-3.26.2/help/es/bug-filing.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - Rellene un informe de error para el Visor de imágenes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Informar de un problema con el Visor de imágenes -

El visor de imágenes lo mantiene la comunidad de manera voluntaria. Si quiere participar, es bienvenido.

- -

Si sufre problemas con el Visor de imágenes (por ejemplo, si se cuelga o se comporta de forma inesperada) o si le falta alguna característica que cree que debería tener, rellene un informe de error pulsando en el enlace . Los informes de error son la base para que los desarrolladores sigan los problemas y puedan arreglarlos.

-

Para participar necesita una cuenta, que le permitirá obtener acceso, informar de errores y hacer comentarios. También debe registrarte para poder recibir actualizaciones por correo-e sobre el estado de su informe de error. Si todavía no tiene una cuenta, simplemente pulse en el enlace New Account para crear una.

-

Una vez que tenga una cuenta, inicie sesión y pulse en File a BugCoreeog. Antes de informar de un error, lea la guía para informar de un error y explore para ver si ya se ha informado del error.

-

Para informar de un error, elija el componente en el menú Component. Si no está seguro de a qué componente pertenece su error, elija general.

-

Si está solicitando una característica nueva, elija enhancement en el menú Severity. Rellene las secciones «Summary» y «Description» y pulse en Submit Bug.

-

Se proporcionará un número de ID a su informe y su estado se actualizará según se vaya gestionando. Los errores pueden tardar en ser solucionados y los desarrolladores del software pueden preguntarle información adicional para ayudarles a descubrir cuál es el problema.

- diff -Nru eog-3.26.2/help/es/commandline.page eog-3.27.90/help/es/commandline.page --- eog-3.26.2/help/es/commandline.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,67 +0,0 @@ - - - - - - Línea de comandos - El comando eog puede abrir cualquier número de imágenes en varios modos. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -La línea de comandos - -

Para iniciar el Visor de imágenes desde la Terminal, escriba eog.

-

Puede abrir un archivo en concreto escribiendo el nombre del archivo después del comando eog:

-eog imagen.jpeg -

Puede abrir una carpeta en concreto escribiendo el nombre del archivo después del comando eog:

-eog carpeta -

Para ver todas las imágenes abiertas en la instancia, puede querer examinar la colección de imágenes.

- -
- Abrir una imagen en modo a pantalla completa - eog --fullscreen imagen.jpeg -
- -
- Abrir imagen en una instancia nueva - eog --new-instance imagen.jpeg -
-
- Abrir una carpeta en modo diapositiva - eog --slide-show Imágenes/ -
- diff -Nru eog-3.26.2/help/es/copy-paste.page eog-3.27.90/help/es/copy-paste.page --- eog-3.26.2/help/es/copy-paste.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,48 +0,0 @@ - - - - - - - - Cómo copiar/pegar desde el Visor de imágenes a otra aplicación. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Copiar y pegar una imagen -

Para copiar una imagen desde el Visor de Imágenes a otra aplicación, pulse con el botón derecho sobre la imagen y elija Copiar.

- -

La imagen se ha copiado al portapapeles, y ahora se puede pegar en un documento de LibreOffice, una imagen de Gimp o en cualquier otra aplicación.

- - diff -Nru eog-3.26.2/help/es/default.page eog-3.27.90/help/es/default.page --- eog-3.26.2/help/es/default.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - Hacer que el Visor de imágenes sea la aplicación predeterminada para ver imágenes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Abrir imagenes, de forma predeterminada, en el Visor de imágenes -

Si quiere que el Visor de imágenes sea el programa predeterminado que abre ciertos tipos de imágenes:

- - - -

En la aplicación de archivos, pulse con el botón derecho sobre el archivo y elija Propiedades.

- - -

Vaya a la pestaña Abrir con. Aparecerá una lista de Aplicaciones recomendadas.

- - -

Seleccione el Visor de imágenes y pulse Establecer como predeterminado.

-

Si el Visor de imágenes no está en la lista de Aplicaciones recomendadas, pulse en Mostrar otras aplicaciones. Seleccione el Visor de imágenes y pulse Establecer como predeterminada.

- - -

Pulse Cerrar.

- - - -

En el futuro, cuando pulse dos veces sobre un archivo del mismo tipo, este se abrirá en el Visor de imágenes.

- - diff -Nru eog-3.26.2/help/es/desktop-background.page eog-3.27.90/help/es/desktop-background.page --- eog-3.26.2/help/es/desktop-background.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - Establecer su imagen favorita como fondo del escritorio. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Establecer la imagen actual como fondo del escritorio -

Para establecer la imagen que está viendo actualmente como la imagen de fondo en su escritorio, pulse Establecer como fondo de escritorio.

- -

Esto cambiará automáticamente el fondo de escritorio a la imagen que está viendo. Se le preguntará si quiere modificar la apariencia de la imagen usando la ventana de preferencias Fondo. Si pulsa Ocultar desaparecerá el mensaje.

- diff -Nru eog-3.26.2/help/es/develop.page eog-3.27.90/help/es/develop.page --- eog-3.26.2/help/es/develop.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - Mejorar el el Visor de imágenes - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Compartir Igual 3.0

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Contribuir al desarrollo -

El Visor de imágenes lo desarrolla y lo mantiene una comunidad de voluntarios. Si quiere participar, es bienvenido.

-

Si quiere contribuir al desarrollo del Visor de imágenes, puede ponerse en contacto con los desarrolladores usando irc, o mediante su lista de correo.

- - diff -Nru eog-3.26.2/help/es/documentation.page eog-3.27.90/help/es/documentation.page --- eog-3.26.2/help/es/documentation.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - Unirse al equipo de documentación. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Compartir Igual 3.0

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Ayudar a escribir documentación - -

La documentación del Visor de imágenes la mantiene una comunidad de voluntarios. Si quiere participar, es bienvenido.

- -

Para contribuir con el Proyecto de documentación, puede contactar con nosotros usando irc, o mediante nuestra lista de correo.

-

El wiki contiene información útil.

- - - diff -Nru eog-3.26.2/help/es/edit.page eog-3.27.90/help/es/edit.page --- eog-3.26.2/help/es/edit.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,65 +0,0 @@ - - - - - - Pulse Abrir con para editar una imagen usando un editor de imágenes externo. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - -Editar o eliminar una imagen - -
Editar una imagen -

El Visor de imágenes sólo se puede usar para ver imágenes; no puede editarlas. Para ello debe usar una aplicación de edición de imágenes, tal como GIMP. Para abrir una imagen para editarla en una aplicación diferente:

- - -

Pulse Abrir con, o pulse con el botón derecho sobre la imagen.

- - -

Seleccione la aplicación que usar para editar la imagen.

- - -

Cuando haya terminado de editar, guárdela y cierre la otra aplicación.

- - -

El Visor de imágenes detectará que la imagen ha cambiado y le preguntará si quiere recargarla.

- - -
- -
-Eliminar una imagen -

Para eliminar una imagen que ya no quiera, pulse con el botón derecho del ratón sobre ella y seleccione Mover a la papelera.

-
- - diff -Nru eog-3.26.2/help/es/flip-rotate.page eog-3.27.90/help/es/flip-rotate.page --- eog-3.26.2/help/es/flip-rotate.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,79 +0,0 @@ - - - - - - Horizontal y vertical, horario y antihorario - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Voltear o rotar imágenes - -

Si sus imágenes se muestran giradas de forma incorrecta, puede voltearlas o rotarlas para que se muestren correctamente.

- - -
-Voltear una imagen - -

Pulse Editar.

 -

Seleccione Voltear horizontalmente o Voltear verticalmente.

 - -

Si quiere mantener la imagen volteada así, pulse Guardar.

-

De otra forma, no guarde la imágen y volverá a su orientación original la siguiente vez que la abra.

- - -
- -
-Rotar una imagen - -

Mueva el ratón sobre la imagen. Aparecerán dos botones con flechas en la parte inferior.

 -

Seleccione Rotar la imagen 90 grados a la izquierda o Rotar la imagen 90 grados a la derecha.

 - -

Si quiere mantener la imagen rotada de esta forma, pulse Guardar.

-

De otra forma, no guarde la imágen y volverá a su orientación original la siguiente vez que la abra.

- - - -

También puede usar los atajos de teclado:

- - - - - - - - - - -

Rotar en el sentido de las agujas del reloj

CtrlR

Rotar en sentido antihorario

CtrlMayúsR

- -
- diff -Nru eog-3.26.2/help/es/format-change.page eog-3.27.90/help/es/format-change.page --- eog-3.26.2/help/es/format-change.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,88 +0,0 @@ - - - - - - Puede convertir imágenes de un formato de imagen a otro. Puede hacerlo para un lote de varios archivos. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Convertir a un formato de archivo diferente - -

Las imágenes se guardan en un formato de archivo específico, como JPEG o PNG. Puede convertir de un formato de archivo a otro.

- -
- Convertir una sola imagen a un formato de archivo diferente - - -

Pulse Guardar como. Se mostrará la ventana emergente Guardar imagen.

- - -

En el campo de nombre, cambie la extensión del archivo al formato de archivo al que quiere convertir su imagen. La extensión del archivo es la parte del nombre del archivo después del punto.

-

Por ejemplo, para convertir un archivo en JPEG (.jpg) a un archivo en formato mapa de bits (BMP, .bmp):

-

archivo original: imagen.jpg

-

archivo nuevo: imagen.bmp

- - -

Pulse Guardar y se guardará un archivo nuevo en el nuevo formato. El archivo antiguo (en el formato anterior) seguirá donde estaba y no se eliminará.

- - - -

El Visor de imágenes intenta adivinar el formato de archivo en el que guardar la imagen basándose en la extensión de archivo que elija. Si no reconoce la extensión de archivo que escriba o si no sabe cuál usar, pulse Archivos de imagen soportados en la ventana Guardar imagen. Esto le permitirá elegir un tipo de archivo de la caja desplegable.

- -
- -
- Convertir varias imágenes a un tipo de archivo diferente -

Puede convertir cierto número de imágenes de un formato de archivo a otro de una sola vez. Útil si tiene un montón de imágenes que necesita convertir.

- - -

En la colección de imágenes, pulse y mantenga pulsada la tecla Ctrl y seleccione las imágenes que quiere convertir una por una. Alternativamente pulse CtrlA para seleccionar todas las imágenes.

- - -

Pulse Guardar como…. Aparecerá una ventana (mostrada a continuación).

- - - -

De forma predeterminada, las imágenes se guardarán en la carpeta actual. Si quiere guardarlas en otro lugar, seleccione la carpeta desde el menú desplegable Carpeta de destino.

- - -

Seleccione el formato de archivo al que quiere convertir las imágenes desde el menú desplegable a la derecha de la caja de entrada Formato del nombre de archivo.

- - -

Pulse Guardar.

- - -
- - diff -Nru eog-3.26.2/help/es/formats-save.page eog-3.27.90/help/es/formats-save.page --- eog-3.26.2/help/es/formats-save.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - JPEG, PNG, BMP y otros. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - - Formatos soportados para guardar imágenes -

El Visor de imágenes puede guardar imágenes en los siguientes formatos:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

Puede ser posible guardar otros formatos de imágenes, dependiendo de la configuración del sistema.

 - diff -Nru eog-3.26.2/help/es/formats-view.page eog-3.27.90/help/es/formats-view.page --- eog-3.26.2/help/es/formats-view.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - El Visor de imágenes puede mostrar imágenes de muchos tipos de formato de imagen, incluyendo PNG, JPEG y TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - - Formatos de imagen soportados - -

El Visor de imágenes puede abrir imágenes en los siguientes formatos:

- -

ANI: Animación

 -

BMP: Bitmap

 -

GIF: Graphics Interchange Format

 -

ICO: iconos de Windows

 -

JPEG/JPG: Joint Photographic Experts Group

 -

PCX: PC Paintbrush

 -

PNG: Portable Network Graphics

 -

PNM: Portable Anymap from the PPM Toolkit

 -

RAS: Sun Raster

 -

SVG: Scalable Vector Graphics

 -

TGA: Targa

 -

TIFF: Tagged Image File Format

 -

WBMP: Wireless Bitmap

 -

XBM: X Bitmap

 -

XPM: X Pixmap

 - -

Si intenta abrir una imagen en un formato no soportado obtendrá un error de No se pudo cargar la imagen «nombre de la imagen».

- diff -Nru eog-3.26.2/help/es/index.page eog-3.27.90/help/es/index.page --- eog-3.26.2/help/es/index.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - Ayuda del Visor de imágenes Eye of GNOME. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Visor de imágenes Eye of GNOME - Visor de imágenes Eye of GNOME - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> Visor de imágenes Eye of GNOME -
- Ver imágenes -
- -
- Editar imágenes -
- -
- Imprimir imágenes -
- -
- Añadir características adicionales - -
-
- Avanzadas -
- -
- Preguntas más frecuentes -
- -
- Sugerencias y trucos -
- -
- Involucrarse -
- diff -Nru eog-3.26.2/help/es/introduction.page eog-3.27.90/help/es/introduction.page --- eog-3.26.2/help/es/introduction.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - Bienvenido al Visor de imágenes Eye of GNOME. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Introducción - -

Eye of GNOME es un visor de imágenes. Con él puede ver imágenes de casi cualquier tipo. Puede gestionar grandes colecciones de imágenes y puede mostrar un pase de diapositivas. También puede hacer cambios básicos en las fotografías como rotarlas o voltearlas, o convertirlas a un formato de archivo diferente.

- - diff -Nru eog-3.26.2/help/es/legal.xml eog-3.27.90/help/es/legal.xml --- eog-3.26.2/help/es/legal.xml 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Este trabajo está licenciado bajo la Creative Commons Atribución - Compartir igual 3.0 de Estados Unidos sin soporte.

-

Como excepción especial, los poseedores de los derechos de autor le dan permiso para copiar, modificar y distribuir el ejemplo de código contenido en este documento bajo los términos que usted elija, sin restricción.

- diff -Nru eog-3.26.2/help/es/license.page eog-3.27.90/help/es/license.page --- eog-3.26.2/help/es/license.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - - Información legal. - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - - Licencia -

Este trabajo está licenciado bajo una Licencia Creative Commons Atribución - Compartir igual 3.0 sin soporte.

-

Es libre de:

- - - <em>Compartir</em> -

Copiar, distribuir y comunicar públicamente la obra

- - - <em>Hacer obras derivadas</em> -

Adaptar el trabajo.

- - -

Bajo las siguientes condiciones:

- - - <em>Atribución</em> -

Debe reconocer los créditos de la obra de la manera especificada por el autor o el licenciador (pero no de una manera que sugiera que tiene su apoyo o apoyan el uso que hace de su obra).

- - - <em>Compartir igual</em> -

Si altera, transforma o amplía esta obra para crear una obra derivada, sólo puede distribuir la obra resultante bajo la misma licencia, una similar o una compatible.

- - -

Para ver el texto completo de la licencia consulte la página web de Creative Commons o lea el Escrito de Commons.

- diff -Nru eog-3.26.2/help/es/open.page eog-3.27.90/help/es/open.page --- eog-3.26.2/help/es/open.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - Las imágenes se abren en una ventana nueva. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - - -Abrir una imagen - -

Las imágenes deberían abrirse automáticamente en el Visor de imágenes cuando pulsa dos veces sobre un archivo de imagen en el examinador de archivos. Si no es el caso, debe hacer que el Visor de imágenes sea la aplicación predeterminada para ver imágenes.

- -

Cada imagen sobre la que pulse dos veces se abrirá en una ventana nueva de manera predeterminada, pero también puede ver varias imágenes en una única ventana si quiere.

- -

También puede abrir imágenes desde el mismo visor de imágenes:

- -

Pulse Abrir… (o pulse CtrlO). Se mostrará el diálogo Abrir imagen.

 -

Seleccione la imagen que quiere abrir y pulse Abrir.

 - - - diff -Nru eog-3.26.2/help/es/plugin-exif-digital.page eog-3.27.90/help/es/plugin-exif-digital.page --- eog-3.26.2/help/es/plugin-exif-digital.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,93 +0,0 @@ - - - - - - Ver información como la configuración de la cámara y el histograma, la ubicación geográfica y la fecha. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Ver información detallada acerca de la foto - -

Las imágenes tomadas con una cámara digital se almacenan con información adicional empotrada en ellas, tal como la fecha en la que se tomaron, la configuración de exposición usada en la cámara y, en algunos casos, incluso dónde se tomó la foto.

- -

Este tema le muestra cómo puede acceder a esta información.

- -
-Mostrar la fecha en la barra de estado - -

Puede mostrar la fecha en la que se tomó una fotografía en la barra de estado, en la parte inferior de la ventana.

-

Para hacer esto, abra el menú de la aplicación en la barra superior, pulse en Preferencias y vaya a la pestaña Complementos. Luego compruebe la Fecha en la barra de estado.

-
- -
- Datos Exif detallados -

La información detallada almacenada en las fotos digitales se llama Datos Exif. Puede verla instalando un complemento para el Visor de imágenes.

- - - -

Para poder añadir esta funcionalidad necesitará tener instalado eog-plugins.

- - -

Si eog-plugins está instalado, pulse abra el menú de la aplicación en la barra superior y pulse en Preferencias. Después, marque Mostrar Exif y pulse Cerrar.

- - -

Pulse Panel lateral para ver la configuración de la cámara usada para hacer la foto. Para ver también el histograma mostrando el balance de colores y de luces y sombras de la foto, seleccione Mostrar Exif en la pestaña Complementos y pulse Preferencias. compruebe los histogramas que quiere ver, listados en Histograma.

- - -

También puede ver la configuración de la cámara usada para tomar la foto en la barra de estado. Seleccione Mostrar Exif en la pestaña Complementos y pulse Preferencias. Marque Mostrar la configuración de la cámara en la barra de estado.

- - -
- -
- Mostrar un mapa con la ubicación de la foto -

Algunas cámaras son capaces de adjuntar información de geolocalización (geo-etiquetas) a las fotos digitales. Generalmente, las geo-etiquetas son coordenadas GPS (latitud y longitud) del lugar donde se tomó la foto.

- - - -

Para poder añadir esta funcionalidad necesitará tener instalado eog-plugins.

- - -

Si eog-plugins está instalado, abra el menú de la aplicación en la barra superior y pulse en Preferencias y vaya a la pestaña Complementos. Marque la casilla de Mapa y cierre el diálogo.

- - -

Para mostrar el mapa, pulse Panel lateral.

- - -

El mapa sólo mostrará la ubicación donde se tomó la imágen si existe información de geolocalización adjunta en la foto. Muchas cámaras no adjuntan la información de geolocalización a las fotos.

-
- - - diff -Nru eog-3.26.2/help/es/plugin-fullscreen-background.page eog-3.27.90/help/es/plugin-fullscreen-background.page --- eog-3.26.2/help/es/plugin-fullscreen-background.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - Activa el color de fondo cambiante en modo a pantalla completa. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Cambiar el color de fondo a pantalla completa - -

Si le gusta, puede cambiar el color de fondo en el modo a pantalla completa.

- -

Para hacer esto, abra el menú de la aplicación en la barra superior, pulse en Preferencias, y vaya a la pestaña Complementos. Luego pulse en Fondo a pantalla completa y pulse en Preferencias. Elija el color que quiere en el modo a pantalla completa y cierre el diálogo.

- -

Ahora, cuando esté en modo a pantalla completa, el color de fondo será el que haya elegido.

- -

Para poder añadir esta funcionalidad necesitará tener instalado eog-plugins.

- - diff -Nru eog-3.26.2/help/es/plugin-fullscreen-double-click.page eog-3.27.90/help/es/plugin-fullscreen-double-click.page --- eog-3.26.2/help/es/plugin-fullscreen-double-click.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - Activar el modo a pantalla completa pulsando dos veces sobre una imagen. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Pantalla completa con doble pulsación - - - -

Si quiere, puede hacer que las imágenes se muestren a pantalla completa al pulsar dos veces sobre ellas en el Visor de imágenes.

- -

Para ello, pulse Preferencias y vaya a la pestaña Complementos. Allí, marque Pantalla completa con doble pulsación y pulse Cerrar.

- -

Ahora al pulsar dos veces sobre una imagen cambiará entre los modos a pantalla completa y normal (ventana).

- - diff -Nru eog-3.26.2/help/es/plugin-picasa.page eog-3.27.90/help/es/plugin-picasa.page --- eog-3.26.2/help/es/plugin-picasa.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - Subir imágenes fácilmente a PicasaWeb desde el Visor de imágenes. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Subir fotos a <app>PicasaWeb</app> - -

PicasaWeb es un servicio de álbumes de fotos que le permite compartir imágenes en línea con gente. Puede añadir un botón que le permita subir imágenes adecuadamente a PicasaWeb.

- -

Para ello, asegúrese de que eog-plugins está instalado. Después, pulse Preferencias y vaya a la pestaña Complementos y marque Cargador para PicasaWeb.

-

Esto le proporcionará el elemento de menú Subir a PicasaWeb.

- -

Para poder añadir esta funcionalidad necesitará tener instalado eog-plugins.

- - diff -Nru eog-3.26.2/help/es/plugin-python-console.page eog-3.27.90/help/es/plugin-python-console.page --- eog-3.26.2/help/es/plugin-python-console.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - - La Consola de Python se puede usar para añadir funciones adicionales y ejecutar scripts en el Visor de imágenes. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Consola de Python - -

El Visor de imágenes tiene un sistema de complementos que usa el lenguaje de «scripting» Python. Si activa la Consola de Python puede obtener acceso al intérprete de Python dentro del Visor de imágenes, que puede usar para escribir «scripts» o manipular imágenes programando.

- - - -

Para poder añadir esta funcionalidad necesitará tener instalado eog-plugins.

- - -

Una vez que haya instalado eog-plugins, pulse Preferencias y vaya a la pestaña Complementos.

- - -

Marque Consola de Python y pulse Cerrar.

- - -

Pulse Consola de Python para mostrar la consola.

- - - - diff -Nru eog-3.26.2/help/es/plugin-send-by-mail.page eog-3.27.90/help/es/plugin-send-by-mail.page --- eog-3.26.2/help/es/plugin-send-by-mail.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Enviar imágenes de forma fácil adjuntándolas a un correo-e nuevo. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Enviar imágenes por correo-e - -

Puede añadir un botón que proporciona una forma conveniente de enviar imágenes a gente a través de correo electrónico.

- -

Para ello, pulse Preferencias y vaya a la pestaña Complementos. Allí, marque Enviar por correo-e y pulse Cerrar. Esto le proporcionará un elemento de menú HerramientasEnviar por correo-e.

- -

Para poder añadir esta funcionalidad necesitará tener instalado eog-plugins.

- - -

Para esta tarea el correo de Evolution debe estar configurado para conectarse a su cuenta de correo-e.

- - - - - diff -Nru eog-3.26.2/help/es/plugin-slideshow-shuffle.page eog-3.27.90/help/es/plugin-slideshow-shuffle.page --- eog-3.26.2/help/es/plugin-slideshow-shuffle.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - - Mostrar fotos en orden aleatorio al reproducir un pase de diapositivas. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Diapositivas aleatorias - -

Puede hacer que sus imágenes se muestren de forma aleatoria al verlas en el modo de pase de diapositivas.

- -

Para ello, pulse Preferencias y vaya a la pestaña Complementos. Allí, marque Diapositivas aleatorias y pulse Cerrar.

- -

Para poder añadir esta funcionalidad necesitará tener instalado eog-plugins.

- - diff -Nru eog-3.26.2/help/es/plugins.page eog-3.27.90/help/es/plugins.page --- eog-3.26.2/help/es/plugins.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,94 +0,0 @@ - - - - - - Instalar complementos para acceder a características adicionales. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Complementos - -

Puede instalar el paquete eog-plugins para obtener un conjunto de complementos para el Visor de imágenes. Los complementos añaden funcionalidades adiciones, como las listadas debajo.

- - -

Puede instalar el paquete eog-plugins usando el gestor de paquetes de su distribución GNU/Linux.

- - - -

instalar eog-plugins

- - - - -

Las siguientes características se incluyen en eog-plugins:

- - - -

Fecha en la barra de estado: muestra la fecha de la imagen en la barra de estado de la ventana.

- - -

Mostrar Exif: muestra la configuración de la cámara y el histograma de fotos digitales.

- - -

Fondo a pantalla completa: activa el fondo de pantalla cambiante en modo a pantalla completa.

- - -

Pantalla completa con doble pulsación: activar el modo a pantalla completa con una doble pulsación.

- - -

Mapa: muestra la geolocalización de la imagen en un mapa.

- - -

Cargador de PicasaWeb: suba sus imágenes a PicasaWeb.

- - -

Consola de Python: una consola de «scripting» en Python para el Visor de imágenes.

- - -

Enviar por correo-e: envía una imagen a un contacto como adjunto en un correo-e nuevo.

- - -

Diapositivas aleatorias: muestra las diapositivas de forma aleatoria.

- - -

Ampliar para ajustar a la anchura de la imagen: ajusta la ampliación para que la anchura de la imagen se ajuste a la ventana.

- - - - -

Puede gestionar los complementos en la pestaña de complementos en la ventana de Preferencias.

- - - diff -Nru eog-3.26.2/help/es/plugin-zoom-width.page eog-3.27.90/help/es/plugin-zoom-width.page --- eog-3.26.2/help/es/plugin-zoom-width.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - Ajusta la ampliación para que la imagen ocupe la anchura de la pantalla. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Ampliar para ajustar a la anchura de la pantalla - -

Actíve el complemento Ampliar para ajustar a la anchura de la imagen si quiere que las imágenes se expandan para rellenar la anchura completa de la ventana.

- -

Para ello, pulse Preferencias y vaya a la pestaña Complementos. Allí, marque Ampliar para ajustar a la anchura de la imagen y pulse Cerrar.

- -

Para añadir esta funcionalidad necesitará instalar eog-plugins.

- - diff -Nru eog-3.26.2/help/es/preferences.page eog-3.27.90/help/es/preferences.page --- eog-3.26.2/help/es/preferences.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,103 +0,0 @@ - - - - - - Vista de imágenes, diapositivas y complementos. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Preferencias -

Este tema explica toda la configuración que puede cambiar en el Visor de imágenes. Abra el menú de la aplicación en la barra superior y pulse en Preferencias para empezar a cambiar las preferencias.

- - - -
-Preferencias de visión de imágenes - - - - Mejoras de imagen -

Seleccione Suavizar imágenes al reducir para activar el suavizado de imágenes cuando amplía y reduce. Hará que las imágenes de baja resolución (pixeladas) se muestren mejor suavizando sus bordes.

-

Si activa la Orientación automática las imágenes se rotarán automáticamente según sus metadatos Exif. Es información acerca de una imagen automáticamente insertada por la cámara digital y puede incluir detalles acerca de cómo se sostuvo la cámara cuando se tomó la fotografía. Por ejemplo, cuando se usa la orientación automática, las fotos de retratos se rotan automáticamente de forma correcta. La rotación no se guarda hasta que guarda la imagen rotada.

-

La orientación automática no funciona con todas las imágenes; sólo se rotarán las imágenes tomadas usando una cámara que guarda los metadatps de orientación Exif.

- - - Partes transparentes -

Seleccione una de las opciones siguientes para determinar cómo se muestran las partes transparentes de una imagen, si hay alguna:

- - -

Como patrón de cuadros:

-

Muestra cualquier parte transparente de la imagen en un patrón de cuadros.

- - -

Como color personalizado:

-

Muestra cualquier parte transparente de la imagen en un color sólido que especifique pulsando en el botón de selección de color.

- - -

Como fondo:

-

Muestra cualquier parte transparente de la imagen en el color de Fondo, si Como color personalizado, bajo Fondo está marcado. De otra forma, se usa el color de fondo predeterminado.

- - - - -
- - -
-Preferencias del pase de diapositivas - -

Para personalizar los ajustes del pase de diapositivas:

- - -

Bajo Ampliación de imagen puede seleccionar si quiere que las imágenes más pequeñas que la pantalla se expandan para ajustarse a la pantalla.

- - -

Bajo Secuencia puede seleccionar cuántos segundos se debería mostrar cada imagen (entre 1 y 100) antes de mostrar la siguiente imagen.

- - -

Marque Secuencia en bucle si quiere que sus diapositivas se repitan cíclicamente. Si está desmarcada, la muestra comenzará en la imagen seleccionada y terminará en la última imagen en la carpeta.

- - -
- - -
-Preferencias de los complementos - - - - -

Aquí puede marcar o desmarcar cualquier función adicional que quiera activar o desactivar. La imagen a la izquierda muestra los complementos disponibles de forma predeterminada.

- -

También puede querer instalar el paquete eog-plugins que contiene complementos que proporcionan ciertas características adicionales. Después de hacerlo, podrá seleccionar qué complementos adicionales quiere activar, según pueda verlos a la derecha.

-
- - diff -Nru eog-3.26.2/help/es/print.page eog-3.27.90/help/es/print.page --- eog-3.26.2/help/es/print.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - Pulse Imprimir… y después use las pestañas para cambiar la configuración de impresión. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Imprimir imágenes - -

Para imprimir la imagen que está viendo actualmente:

- - - -

Pulse Imprimir….

- - -

Bajo la pestaña General, elija la impresora que quiere usar y el número de copias que quiere imprimir.

- - -

En la pestaña Ajustes de imagen puede configurar la Posición y Tamaño de la imagen.

-

También se puede ajustar la posición de la imagen en la página arrastrándola en la vista previa.

- - -

Si está usando un papel fotográfico de alta calidad, vaya a la pestaña Configuración de página y seleccione el Tipo de papel correcto. También debería ir a la pestaña Calidad de la imagen y elegir un ajuste de alta calidad para que así obtenga la mejor calidad en la foto.

- - -

Pulse Imprimir.

- - - -

Note que algunas de las pestañas mencionadas pueden no mostrarse para ciertos tipos de impresora. Es porque los controladores de impresión para esas impresoras no permiten cambiar algunos de los ajutes. De tal forma que, si no ve la pestaña Calidad de la imagen probablemente significa que los controladores de la impresora que está usando no soportan esa configuración.

- - diff -Nru eog-3.26.2/help/es/rename-multiple.page eog-3.27.90/help/es/rename-multiple.page --- eog-3.26.2/help/es/rename-multiple.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - - Renombrar y enumerar automáticamente lotes de fotografías. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Renombrar varias imágenes a la vez - -

Si tiene muchas imágenes que quiere renombrar, quizá tenga su propio estándar, o un formato de nombre numerado:

- - - -

Abra la colección de imágenes pulsando F9.

- - -

Seleccione todas las imágenes que quiere renombrar de la colección de imágenes manteniendo pulsada la tecla Ctrl y pulsando sobre las imágenes una a una.

-

También puede pulsar CtrlA para seleccionar todas las imágenes en la carpeta.

- - -

Pulse Guardar como…. Aparecerá una ventana con algunas opciones sobre el nombre de archivo la imagen de debajo muestra la ventana).

- - -

De forma predeterminada, las imágenes se guardarán en la carpeta actual. Para guardarlas en otro lugar, cambie la Carpeta de destino.

- - -

Use la caja Formato del nombre de archivo para escoger escojer el formato para el nombre de las imágenes. La Vista previa del nombre de archivo le muestra cómo serán los nombres de archivo nuevos. Consulte debajo la sección para obtener consejos sobre cómo renombrar archivos.

- - -

Asegúrese que el desplegable Formato del nombre de archivo diga tal cual, a menos que esté convirtiendo las imágenes a un formato de archivo diferente.

- - -

Pulse Guardar como y se renombrarán las imágenes.

- - - - - -
- Elija un formato de nombre de archivo -

El nombre de archivo de los archivos renombrados lo determina lo que escribe en la caja Formato del nombre de archivo.

- - -

Puede mantener el nombre de archivo original dejando %f en la caja.

-

Por ejemplo, si escribe londres_%f en la caja Formato del nombre de archivo, las imágenes flor.jpg, casa.jpg y gato.jpg serán renombradas a londres_flor.jpg, londres_casa.jpg y londres_gato.jpg.

- - -

Añadir un %n numerará las imágenes consecutivamente, comenzando por el número que elija bajo Opciones.

-

Por ejemplo, si escribe hacienda_%n en la caja Formato del nombre de archivo, las imágenes flor.jpg, casa.jpg y gato.jpg serán renombradas a hacienda_2.jpg, hacienda_3.jpg y hacienda_4.jpg. (Se numerarán por orden alfabético según el orden original de sus nombres de archivo.)

- - -
- - diff -Nru eog-3.26.2/help/es/shortcuts.page eog-3.27.90/help/es/shortcuts.page --- eog-3.26.2/help/es/shortcuts.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,174 +0,0 @@ - - - - - - Una lista de todos los atajos. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Atajos de teclado - -

Esto es una lista de todos los atajos de teclado que puede usar en el Visor de imágenes.

- -
- Abrir, cerrar, guardar e imprimir - - - - - - - - - - - - - - - - - - - - - - - - - -

Abrir un archivo de imagen

CtrlO

Guardar la imagen con el mismo nombre de archivo

CtrlS

Guardar una copia de la imagen actual con un nombre nuevo

MayúsCtrlS

Imprimir la imagen actual

CtrlP

Cerrar la ventana actual

CtrlW

Establecer la imagen como fondo del escritorio

CtrlF8

-
- -
- Ver imágenes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Ir a la imagen anterior en la carpeta

Retroceso / Izquierda

Ir a la siguiente imagen en la carpeta

Espacio / Derecha

Ir a la primera imagen en la carpeta

AltInicio

Ir a la última imagen en la carpeta

AltFin

Elegir una imagen aleatoria en la carpeta

CtrlM

Ver la colección de imágenes

F9

Ver en pantalla completa

F11

Ver diapositivas

F5

Tamaño actual

Ctrl0 (cero)

Ajuste _óptim

F

Desplazamiento en una imagen grande

Altteclas de flechas

-
- -
- Copiar una imagen para pegarla en otra aplicación - - - - - -

Copiar

CtrlC

-
- -
- Ampliar y rotar - - - - - - - - - - - - - - - - - -

Ampliar

+

Reducir

-

Rotar en sentido horario

CtrlR

Rotar en sentido antihorario

MayúsCtrlR

-
- -
- Otras - - - - - - - - - - - - - - - - - -

Ver panel lateral

CtrlF9

Ver las propiedades de la imagen

AltIntro

Deshacer

CtrlZ

Ayuda

F1

-
- diff -Nru eog-3.26.2/help/es/slideshow.page eog-3.27.90/help/es/slideshow.page --- eog-3.26.2/help/es/slideshow.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - - Pulse Diapositivas para mostrar todas las imágenes en una carpeta como un pase de diapositivas. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Diapositivas - -

Para ver todas las imágenes de una carpeta como un pase de diapositivas:

- - - -

Abra una de las imágenes de la carpeta.

- - -

Pulse Diapositivas o pulse F5.

-

Comenzará un pase de diapositivas a pantalla completa. Cada pocos segundos se mostrará una imagen nueva. Si quiere moverse entre las diapositivas más rápidamente, o volver a una imagen que ya se ha mostrado, puede usar las teclas de flechas Izquierda y Derecha para moverse manualmente hacia delante y hacia atrás.

- - -

Para salir de la muestra de diapositivas, pulse Esc o F5.

- - - -

Puede cambiar la configuración del pase de diapositivas como el tiempo que se muestra cada imagen. Para obtener más información consulte el tema preferencias del pase de diapositivas.

- - diff -Nru eog-3.26.2/help/es/translate.page eog-3.27.90/help/es/translate.page --- eog-3.26.2/help/es/translate.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - Localizar el Visor de imágenes. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Ayudar a traducir -

La interfaz de usuario y la documentación del Visor de imágenes las traduce una comunidad de voluntarios de todo el mundo. Si quiere participar, es bienvenido.

-

Hay muchos idiomas para los que se siguen necesitando traducciones.

-

Para empezar a traducir necesitará crear una cuenta y unirse al equipo de traducción de su idioma. Esto le dará la posibilidad de subir traducciones nuevas.

- -

Puede chatear con los traductores de GNOME usando irc. La gente de los canales se encuentra en cualquier parte del mundo, por lo que puede que no obtenga una respuesa inmediata debido a las diferencias horarias.

-

Alternativamente, puede contactar con el equipo de internacionalización usando su lista de correo.

- diff -Nru eog-3.26.2/help/es/view.page eog-3.27.90/help/es/view.page --- eog-3.26.2/help/es/view.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ - - - - - - Pulse Izquierda y Derecha para cambiar entre las imágenes o use la colección de imágenes para mostrarlas todas. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - -Ver todas las imágenes en una carpeta - -

Puede examinar rápidamente todas sus imágenes en una carpeta abriendo una de las imágenes y pulsando los botones Siguiente y Anterior a la izquierda y derecha de la imagen (por ejemplo). También puede ver una colección de imágenes, con pequeñas vistas previas de todas las imágenes en la carpeta mostradas a la vez.

- -
- Examinar todas las imágenes en una carpeta -

Si tiene una carpeta que contiene varias fotografías puede examinarlas todas sin tener que abrirlas individualmente.

- - -

Abrir cualquiera de las imágenes en la carpeta que quiera examinar.

- - -

Pulse Siguiente y Anterior a la izquierda o la derecha de la imagen mostrada, o pulse las teclas Derecha e Izquierda para cambiar entre imágenes.

-

Alternativamente puede usar las teclas Arriba y Abajo o la Barra espaciadora y el Retroceso.

- - -

Puede examinar las imágenes a pantalla completa pulsando el botón Pantalla completa o pulsando F11. Use las teclas de flechas para cambiar entre las imágenes cuando esté en el modo a pantalla completa.

-

Para volver a la vista normal, pulse Esc o F11.

- - -
- - - - diff -Nru eog-3.26.2/help/es/zoom.page eog-3.27.90/help/es/zoom.page --- eog-3.26.2/help/es/zoom.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/es/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,60 +0,0 @@ - - - - - - - Agrandar la imagen en la pantalla. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2011-2017 - - - - Jorge González - jorgegonz@svn.gnome.org - 2008-2011 - - - - Francisco Javier F. Serrador - serrador@openshine.com - 2006 - - - -Ampliación - -

Puede ampliar y reducir para mostrar más o menos de una imagen en la pantalla. Es útil si quiere ver una imagen grande completamente o si quiere inspeccionar los detalles de una imagen.

- - - -

Puede ampliar usando la rueda del ratón. Despláce la rueda hacia arriba para ampliar o hacia abajo para reducir.

- - -

También puede ampliar usando los botones en la barra de título. Para ampliar, pulse el icono Agrandar la imagen y para reducir pulse el icono Encoger la imagen. Su apariencia es de unos signos «más» y «menos».

- - -

Alternativamente, use los atajos del teclado Ctrl+ o Ctrl-.

- - - -

Para ver la imagen a tamaño original, sin escalar, elija el nivel de ampliación 100% en el desplegable de la barra de título. Alternativamente, use los atajos del teclado Ctrl0 o 1.

- -
- Ampliar para ajustar a la ventana -

Puede elegir la ampliación para que la imagen se ajuste completamente a la ventana, incluso si la redimensiona, para ello pulse Ajuste óptimo.

-
- diff -Nru eog-3.26.2/help/eu/bug-filing.page eog-3.27.90/help/eu/bug-filing.page --- eog-3.26.2/help/eu/bug-filing.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/eu/commandline.page eog-3.27.90/help/eu/commandline.page --- eog-3.26.2/help/eu/commandline.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/eu/copy-paste.page eog-3.27.90/help/eu/copy-paste.page --- eog-3.26.2/help/eu/copy-paste.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/eu/default.page eog-3.27.90/help/eu/default.page --- eog-3.26.2/help/eu/default.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/eu/desktop-background.page eog-3.27.90/help/eu/desktop-background.page --- eog-3.26.2/help/eu/desktop-background.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/eu/develop.page eog-3.27.90/help/eu/develop.page --- eog-3.26.2/help/eu/develop.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/eu/documentation.page eog-3.27.90/help/eu/documentation.page --- eog-3.26.2/help/eu/documentation.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/eu/edit.page eog-3.27.90/help/eu/edit.page --- eog-3.26.2/help/eu/edit.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/eu/flip-rotate.page eog-3.27.90/help/eu/flip-rotate.page --- eog-3.26.2/help/eu/flip-rotate.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/eu/format-change.page eog-3.27.90/help/eu/format-change.page --- eog-3.26.2/help/eu/format-change.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/eu/formats-save.page eog-3.27.90/help/eu/formats-save.page --- eog-3.26.2/help/eu/formats-save.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/eu/formats-view.page eog-3.27.90/help/eu/formats-view.page --- eog-3.26.2/help/eu/formats-view.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - Animazioa

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Windows ikonoa

-

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

-

PNM - Portable Anymap PPM Toolkit-ekoa

 -

RAS - Sun Raster

-

SVG - Scalable Vector Graphics

 -

TGA - Targa

-

TIFF - Tagged Image File Format

-

WBMP - Haririk gabeko bit-mapa

 -

XBM - X bit-mapa

-

XPM - X pix-mapa

- -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/eu/index.page eog-3.27.90/help/eu/index.page --- eog-3.26.2/help/eu/index.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/eu/introduction.page eog-3.27.90/help/eu/introduction.page --- eog-3.26.2/help/eu/introduction.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Sarrera - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/eu/legal.xml eog-3.27.90/help/eu/legal.xml --- eog-3.26.2/help/eu/legal.xml 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/eu/license.page eog-3.27.90/help/eu/license.page --- eog-3.26.2/help/eu/license.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/eu/open.page eog-3.27.90/help/eu/open.page --- eog-3.26.2/help/eu/open.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/eu/plugin-exif-digital.page eog-3.27.90/help/eu/plugin-exif-digital.page --- eog-3.26.2/help/eu/plugin-exif-digital.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/eu/plugin-fullscreen-background.page eog-3.27.90/help/eu/plugin-fullscreen-background.page --- eog-3.26.2/help/eu/plugin-fullscreen-background.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/eu/plugin-fullscreen-double-click.page eog-3.27.90/help/eu/plugin-fullscreen-double-click.page --- eog-3.26.2/help/eu/plugin-fullscreen-double-click.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/eu/plugin-picasa.page eog-3.27.90/help/eu/plugin-picasa.page --- eog-3.26.2/help/eu/plugin-picasa.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/eu/plugin-python-console.page eog-3.27.90/help/eu/plugin-python-console.page --- eog-3.26.2/help/eu/plugin-python-console.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/eu/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/eu/plugin-send-by-mail.page eog-3.27.90/help/eu/plugin-send-by-mail.page --- eog-3.26.2/help/eu/plugin-send-by-mail.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/eu/plugin-slideshow-shuffle.page eog-3.27.90/help/eu/plugin-slideshow-shuffle.page --- eog-3.26.2/help/eu/plugin-slideshow-shuffle.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/eu/plugins.page eog-3.27.90/help/eu/plugins.page --- eog-3.26.2/help/eu/plugins.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/eu/plugin-zoom-width.page eog-3.27.90/help/eu/plugin-zoom-width.page --- eog-3.26.2/help/eu/plugin-zoom-width.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/eu/preferences.page eog-3.27.90/help/eu/preferences.page --- eog-3.26.2/help/eu/preferences.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Hobespenak -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

Irudiaren zati gardenak koadrikula baten gainean erakutsiko ditu.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/eu/print.page eog-3.27.90/help/eu/print.page --- eog-3.26.2/help/eu/print.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/eu/rename-multiple.page eog-3.27.90/help/eu/rename-multiple.page --- eog-3.26.2/help/eu/rename-multiple.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/eu/shortcuts.page eog-3.27.90/help/eu/shortcuts.page --- eog-3.26.2/help/eu/shortcuts.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/eu/slideshow.page eog-3.27.90/help/eu/slideshow.page --- eog-3.26.2/help/eu/slideshow.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Diapositiba-aurkezpena - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/eu/translate.page eog-3.27.90/help/eu/translate.page --- eog-3.26.2/help/eu/translate.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/eu/view.page eog-3.27.90/help/eu/view.page --- eog-3.26.2/help/eu/view.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/eu/zoom.page eog-3.27.90/help/eu/zoom.page --- eog-3.26.2/help/eu/zoom.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/eu/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/fi/bug-filing.page eog-3.27.90/help/fi/bug-filing.page --- eog-3.26.2/help/fi/bug-filing.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,42 +0,0 @@ - - - - - - Kuvakatselimen virheestä ilmoittaminen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Ilmoita kuvakatselimen ongelmasta -

Vapaaehtoisyhteisö ylläpitää Kuvakatselinta. Olet tervetullut liittymään kehitystyöhön.

- -

Jos kuvakatselimen käytössä esiintyy ongelmia (kuten kaatuilua tai odottamatonta käytöstä) tai siitä puuttuu joitain ominaisuuksia, lähetä englanninkielinen virheilmoitus seuraavan linkin kautta: . Sovelluskehittäjät pitävät virheilmoitusten avulla kirjaa sovelluksen ongelmista ja niiden korjaamisesta.

-

Virheilmoitusten lähettämiseen ja kommentointiin vaaditaan käyttäjätili. Sen avulla saat myös sähköpostiisi päivityksiä virheilmoituksesi tilasta. Jos sinulla ei vielä ole tiliä, luo uusi New Account (Uusi tili) -linkistä.

-

Luotuasi tilin kirjaudu sisään ja valitse File a BugCoreeog. Lue virheilmoituksen lähetysohjeet ja etsi vastaavia ongelmia jo lähetettyjen ilmoitusten joukosta ennen virheraportin lähettämistä .

-

Kirjoittaessasi virheilmoitusta, valitse ohjelman osa Component valikosta. Jos et ole varma ohjelman osasta, valitse general (yleinen).

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

Ilmoitukselle annetaan numeerinen tunniste ja sen tilaa päivitetään ongelman selvitysprosessin edetessä. Virheiden korjaamiseen saattaa kulua aikaa ja sovelluksen kehittäjät saattavat tarvita lisätietoja ongelman syyn selvittämiseksi.

- diff -Nru eog-3.26.2/help/fi/commandline.page eog-3.27.90/help/fi/commandline.page --- eog-3.26.2/help/fi/commandline.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,61 +0,0 @@ - - - - - - Komentorivi - eog komento voi avata useita kuvia usein eri tavoin. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Komentorivin käyttö - -

Kuvakatselimen voi käynnistää Päätteestä komennolla eog.

-

Komentoriviltä voi avata tiedoston lisäämällä tiedoston nimen eog-komennon perään:

-eog kuva.jpeg -

Tietyn kansion voi puolestaan avata lisäämällä kansion nimen eog-komennon perään:

-eog kansio -

Kaikkien kansion kuvien katsominen samalla kertaa onnistuu kuvakatselunäkymän avulla.

- -
- Kuvan avaaminen kokoruututilassa - eog --fullscreen kuva.jpeg -
- -
- Kuvan avaaminen uudessa prosessissa - eog --new-instance kuva.jpeg -
-
- Kansion avaaminen diaesitystilassa - eog --slide-show Kuvat/ -
- diff -Nru eog-3.26.2/help/fi/copy-paste.page eog-3.27.90/help/fi/copy-paste.page --- eog-3.26.2/help/fi/copy-paste.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - - Kuinka kuvan voi kopioida kuvakatselimesta toiseen ohjelmaan. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Kopioi ja liitä kuva -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

Kuva kopioidaan leikepöydälle, ja se voidaan liittää LibreOffice-asiakirjaan, Gimp-kuvaan tai muuhun ohjelmaan.

- - diff -Nru eog-3.26.2/help/fi/default.page eog-3.27.90/help/fi/default.page --- eog-3.26.2/help/fi/default.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - - Kuvien avaaminen oletuksena kuvakatselimessa. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Avaa kuvatiedostot kuvakatselimella -

Kuvakatselimen voi asettaa kuvatiedostojen avaamiseen käytettäväksi oletusohjelmaksi:

- - - -

Napsauta kuvatiedostoa tiedostoselaimessa hiiren oikealla painikkeella ja valitse Ominaisuudet.

- - -

Siirry Avaa sovelluksella välilehdelle. Suositeltujen sovellusten luettelo ilmestyy näkyviin.

- - -

Valitse Kuvakatselin ja paina Aseta oletukseksi -painiketta.

-

Jos kuvakatselinta ei löydy suositeltujen sovellusten luettelosta, napsauta Näytä muut sovellukset. Valitse Kuvakatselin avautuvasta luettelosta ja paina Aseta oletukseksi -painiketta.

- - -

Napsauta Sulje.

- - - -

Tulevaisuudessa kaikki valitun kuvan tyyppiset kuvat avataan kuvakatselimessa.

- - diff -Nru eog-3.26.2/help/fi/desktop-background.page eog-3.27.90/help/fi/desktop-background.page --- eog-3.26.2/help/fi/desktop-background.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - Lempikuvasi asettaminen työpöydän taustakuvaksi. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Aseta kuva työpöydän taustakuvaksi -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

Tämä muuttaa taustakuvan välittömästi ja antaa mahdollisuuden muokata taustakuvan ulkoasua Taustakuva-asetuksista. Viesti katoaa Piilota painikkeesta.

- diff -Nru eog-3.26.2/help/fi/develop.page eog-3.27.90/help/fi/develop.page --- eog-3.26.2/help/fi/develop.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - Kehitä Kuvakatselinta - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Auta kehitystyössä -

Vapaaehtoisyhteisö kehittää ja ylläpitää Kuvakatselinta. Olet tervetullut liittymään kehitystyöhön.

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/fi/documentation.page eog-3.27.90/help/fi/documentation.page --- eog-3.26.2/help/fi/documentation.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - Liity Gnome:n dokumentointiryhmään. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Auta ohjeen kehittämisessä - -

Vapaaehtoisyhteisö ylläpitää Kuvakatselimen ohjekirjaa. Olet tervetullut liittymään kehitystyöhön.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/fi/edit.page eog-3.27.90/help/fi/edit.page --- eog-3.26.2/help/fi/edit.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,61 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - -Muokkaa tai poista kuva - -
Kuvan muokkaaminen -

Kuvakatselin osaa vain näyttää kuvia - ei muokata niitä. Kuvien muokkaamiseen täytyy käyttää kuvanmuokkaussovellusta kuten GIMP-kuvankäsittelyohjelmaa. Kuvan voi avata muokkausta varten toisessa ohjelmassa seuraavasti:

- - -

Click Open With, -or right-click on the image.

- - -

Valitse ohjelma, jolla haluat muokata kuvaa.

- - -

Kun muutokset on tehty, tallenna kuva ja sulje toinen ohjelma.

- - -

Kuvakatselin havaitsee, että kuva on muuttunut ja lataa sen uudelleen.

- - -
- -
-Kuvan poistaminen -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/fi/flip-rotate.page eog-3.27.90/help/fi/flip-rotate.page --- eog-3.26.2/help/fi/flip-rotate.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ - - - - - - Pysty- tai vaakasuunnassa, myötä- tai vastapäivään - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Peilaa tai kierrä kuvaa - -

Jos kuvien yläreuna on väärässä suunnassa tai kuva on väärin päin, ongelman voi korjata peilaamalla tai kiertämällä kuvaa.

- - -
-Kuvan peilaaminen - -

Valitse Muokkaa.

 -

Valitse joko Peilaa vaakasuunnassa tai Peilaa pystysuunnassa.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Muussa tapauksessa älä tallenna kuvaa. Se palautuu alkuperäiseksi seuraavalla katselukerralla.

- - -
- -
-Kuvan kiertäminen - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Muussa tapauksessa älä tallenna kuvaa. Se palautuu alkuperäiseksi seuraavalla katselukerralla.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Kierrä myötäpäivään

CtrlR

Kierrä vastapäivään

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/fi/format-change.page eog-3.27.90/help/fi/format-change.page --- eog-3.26.2/help/fi/format-change.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - Kuvia voi muuntaa muodosta toiseen. Tämän voi suorittaa myös usealle kuvalle. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Muunna kuvan tiedostotyyppiä - -

Kuvat tallennetaan erityisiä tiedostomuotoja, kuten JPEG:iä tai PNG:tä, käyttäen. Kuvia voi muuntaa tiedostomuodosta toiseen.

- -
- Muunna yhden kuvan tiedostotyyppiä - - -

Click Save As…. The -Save Image window will pop up.

- - -

Muuta tiedoston nimikentässä tiedoston tiedostopäätettä uutta tiedostomuotoa vastaavaksi. Tiedostopääte on tiedostonimen pisteen jälkeinen osa.

-

Esimerkiksi JPEG-kuvan (.jpg) muuntaminen bittikartaksi (.bmp):

-

alkuperäinen tiedosto: kuva.jpg

-

uusi tiedosto: kuva.bmp

- - -

Napsauta Tallenna ja kuva tallennetaan muunnetussa muodossa uuteen tiedostoon. Vanha tiedosto (vanhassa muodossa) säilyy muuttumattomana eikä sitä poisteta.

- - - -

Kuvakatselin pyrkii päättelemään kuvan tallennusmuodon tiedostopäätteen perusteella. Jos päätettä ei tunnisteta tai et tiedä päätettä, napsauta Tuetut kuvatiedostot kuvan tallennusikkunasta. Tiedostomuodon voi nyt valita avautuvasta pudotusvalikosta.

- -
- -
- Muunna usean kuvan tiedostotyyppiä -

Usean kuvan tiedostomuodon samanaikainen muuntaminen on myös mahdollista ja huomattavasti tehokkaampaa kuin kuvien muuntaminen yksi kerrallaan.

- - -

Valitse muunnettavat kuvat kuvakokoelmasta yksi kerrallaan Ctrl-näppäin pohjassa. Kaikki kokoelman kuvat voi valita näppäinkomennolla CtrlA.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

Muunnetut kuvat tallennetaan oletuksena nykyiseen kansioon. Tallennuskansion voi vaihtaa Kohdekansio-pudotusvalikosta.

- - -

Valitse uusi tiedostomuoto Tiedostonimen muoto-kentän oikealla puolella olevasta pudotusvalikosta.

- - -

Paina Tallenna

- - -
- - diff -Nru eog-3.26.2/help/fi/formats-save.page eog-3.27.90/help/fi/formats-save.page --- eog-3.26.2/help/fi/formats-save.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - JPEG, PNG, BMP ja niin edelleen. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - - Tuetut kuvien tallennusmuodot -

Kuvakatselin kykenee tallentamaan kuvia seuraavissa tiedostomuodoissa:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

Kuvia voi mahdollisesti tallentaa myös muissa tiedostomuodoissa järjestelmän kokoonpanosta riippuen.

 - diff -Nru eog-3.26.2/help/fi/formats-view.page eog-3.27.90/help/fi/formats-view.page --- eog-3.26.2/help/fi/formats-view.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,52 +0,0 @@ - - - - - - - Kuvakatselin kykenee esittämään useissa eri muodoissa tallennettuja kuvia, esimerkiksi PNG, JPEG ja TIFF -kuvatiedostoja. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - - Tuetut kuvamuodot - -

Kuvakatselin kykenee avaamaan seuraaviin muotoihin tallennettuja kuvia:

- -

ANI - Animation

 -

BMP - Bittikartta

 -

GIF - Graphics Interchange Format

 -

ICO - Windows Icon

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap from the PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

Jos kuvakatselin ei tue avatun kuvan tiedostomuotoa, kuvakatselimeen ilmestyy virheviesti: Kuvaa "kuvan_nimi" ei voitu ladata.

- diff -Nru eog-3.26.2/help/fi/index.page eog-3.27.90/help/fi/index.page --- eog-3.26.2/help/fi/index.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - Käyttöohje Gnomen silmä -kuvakatselimeen. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Gnomen silmän käyttöohje - Gnomen silmän käyttöohje - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- Katso kuvia -
- -
- Muokkaa kuvia -
- -
- Tulosta kuvia -
- -
- Hanki lisäominaisuuksia - -
-
- Edistynyt käyttö -
- -
- Usein kysytyt kysymykset -
- -
- Ohjeita ja vinkkejä -
- -
- Liity kehitystyöhön -
- diff -Nru eog-3.26.2/help/fi/introduction.page eog-3.27.90/help/fi/introduction.page --- eog-3.26.2/help/fi/introduction.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Tervetuloa käyttämään Eye of GNOME-kuvakatselinta. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Johdanto - -

Eye of GNOME on kuvakatselin, jolla voi avata lähes kaikentyyppisiä kuvatiedostoja. Sillä voi hallita suuria kuvakokoelmia ja luoda diaesityksiä. Kuvia voi myös muun muassa kiertää, peilata ja muuntaa toiseen tiedostomuotoon.

- - diff -Nru eog-3.26.2/help/fi/legal.xml eog-3.27.90/help/fi/legal.xml --- eog-3.26.2/help/fi/legal.xml 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Tämän työn kattaa Creative Commons Attribution-Share Alike 3.0 United States Lisenssi lisenssi.

-

Poikkeuksena lisenssiin tekijänoikeuksien haltijat ovat antaneet sinulle luvan kopioida, muokata ja jakaa tämän ohjeen sisältämiä esimerkkikoodinpätkiä ilman rajoituksia tekemäsi työn käyttöehtoihin.

- diff -Nru eog-3.26.2/help/fi/license.page eog-3.27.90/help/fi/license.page --- eog-3.26.2/help/fi/license.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - - Lainopillinen huomautus. - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - - Lisenssi -

Tämä työ on toimitettu CreativeCommons Attribution-Share Alike 3.0 Unported lisenssin ehdoin.

-

Voit vapaasti:

- - - <em>Jakaa</em> -

Kopioida ja levittää materiaalia.

- - - <em>Muuntaa</em> -

Muuttaa työtä.

- - -

Seuraavien ehtojen täyttyessä:

- - - <em>Nimeä</em> -

Sinun on mainittava tekijät työn tekijän tai lisensoijan määräämällä tavalla (mutta ei niin, että lisenssin antaja näyttäisi tukevan sinua tai materiaalin käyttöäsi).

- - - <em>Jaa samoin</em> -

Jos muokkaat, muutat tai käytät tätä työtä, saat levittää työsi saman, samanlaisen tai yhteensopivan lisenssin alaisuudessa.

- - -

Lisenssin koko sisältö löytyy CreativeCommons-verkkosivuilta ja Commons Deed -sivustolta.

- diff -Nru eog-3.26.2/help/fi/open.page eog-3.27.90/help/fi/open.page --- eog-3.26.2/help/fi/open.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fi/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - Kuvat avataan uuteen ikkunaan. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - - -Avaa kuva - -

Tiedostoselaimesta avatut kuvatiedostot avataan normaalisti kuvakatselimessa. Jos näin ei tapahdu, kuvakatselin täytyy asettaa kuvien avaamiseen käytettäväksi oletusohjelmaksi.

- -

Yhteen kuvakatselinikkunaan voi avata useita kuvia, mutta oletuksena jokainen kuvatiedosto avataan erilliseen kuvakatselinikkunaan.

- -

Kuvia voi avata myös suoraan kuvakatselimesta:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Valitse avattava kuva ja paina Avaa.

 - - - diff -Nru eog-3.26.2/help/fi/plugin-exif-digital.page eog-3.27.90/help/fi/plugin-exif-digital.page --- eog-3.26.2/help/fi/plugin-exif-digital.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,97 +0,0 @@ - - - - - - Lisätietojen, kuten kameran asetusten, tilastojen, kuvauspaikan ja -päivän tarkasteleminen. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Tarkastele kuvan yksityiskohtaisia tietoja - -

Digitaalisilla kameroilla otettujen valokuvien yhteyteen tallennetaan paljon lisätietoja kuvasta ja kuvaustilanteesta. Yleisiä lisätietoja ovat kuvauspäivä, kameran valotusasetukset ja joissain tapauksessa jopa kuvauspaikan koordinaatit.

- -

Tämä sivu selittää, miten näihin tietoihin päästään käsiksi.

- -
-Näytä päivämäärä tilapalkissa - -

Valokuvan kuvauspäivän saa näkyviin ikkunan alareunassa olevaan tilapalkkiin.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Yksityiskohtaiset Exif-tiedot -

Valokuviin tallennettua lisätietoa kutsutaan nimellä Exif-data. Tätä dataa voi tutkia kuvakatselimeen asennettavalla lisäosalla.

- - - -

Tämän ominaisuuden käyttöönotto vaatii eog-plugins -paketin asentamisen.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

Valokuvan ottamiseen käytetyt kamera-asetukset saa näkyviin myös tilapalkkiin. Valitse Exif-näkymä Lisäosat-välilehdeltä, napsauta Asetukset ja valitse Näytä kamera-asetukset tilapalkissa -valintaruutu.

- - -
- -
- Kuvauspaikan sijainti kartalla -

Jotkut kamerat kykenevät lisäämään sijaintitietoja (geotageja) digitaalisiin kuviin. Geotagit ovat yleensä kuvauspaikan GPS-koordinaatteja (pituus- ja leveyspiiri).

- - - -

Tämän ominaisuuden käyttöönotto vaatii eog-plugins -paketin asentamisen.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

Kuvauspaikka lisätään kartalle vain, jos kuvaan on liitetty sijaintitietoja. Kaikki kamerat eivät liitä sijaintitietoja valokuviin.

-
- - - diff -Nru eog-3.26.2/help/fi/plugin-fullscreen-background.page eog-3.27.90/help/fi/plugin-fullscreen-background.page --- eog-3.26.2/help/fi/plugin-fullscreen-background.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Koko näytön tilan taustavärin muuttaminen. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Muuta koko näytön tilan taustaväriä - -

Voit halutessasi muuttaa koko näytön tilan taustaväriä.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Tästä lähtien koko näytön tilassa käytetään juuri valittua taustaväriä.

- -

Tämän ominaisuuden käyttöönotto vaatii eog-plugins -paketin asentamisen.

- - diff -Nru eog-3.26.2/help/fi/plugin-fullscreen-double-click.page eog-3.27.90/help/fi/plugin-fullscreen-double-click.page --- eog-3.26.2/help/fi/plugin-fullscreen-double-click.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - Siirry koko näytön tilaan kaksoisnapsauttamalla kuvaa. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Koko näytön tilaan kaksoisnapsautuksella - - - -

Kuvakatselimeen on saatavilla lisäosa, jonka avulla voidaan siirtyä koko näytön tilaan kaksoisnapsauttamalla kuvaa.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Tämän jälkeen kaksoisnapsautus kuvan päällä vaihtaa esitystilaa normaalin ja koko näytön tilan välillä.

- - diff -Nru eog-3.26.2/help/fi/plugin-picasa.page eog-3.27.90/help/fi/plugin-picasa.page --- eog-3.26.2/help/fi/plugin-picasa.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - Kuvien lähettäminen PicasaWeb:iin suoraan kuvakatselimesta. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Lähetä kuvat <app>PicasaWeb:iin</app> - -

PicasaWeb on valokuvapalvelu, joka mahdollistaa kuvien jakamisen verkossa. Kuvakatselimeen voi lisätä pikapainikkeen, joka tekee kuvien lähettämisestä PicasaWeb:iin helppoa.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

Tämän ominaisuuden käyttöönotto vaatii eog-plugins -paketin asentamisen.

- - diff -Nru eog-3.26.2/help/fi/plugin-python-console.page eog-3.27.90/help/fi/plugin-python-console.page --- eog-3.26.2/help/fi/plugin-python-console.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Python-konsolia voidaan käyttää lisäominaisuuksien lisäämiseen ja pienohjelmien ajamiseen kuvakatselimessa. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Python-konsoli - -

Kuvakatselimessa on Python-ohjelmointikieleen perustuva lisäosajärjestelmä. Kuvakatselimeen voi lisätä Python-konsolin, joka mahdollistaa muun muassa pienohjelmien kirjoittamisen ja kuvien muokkaamisen suoraan kuvakatselimesta Python-komentotulkin avulla.

- - - -

Tämän ominaisuuden käyttöönotto vaatii eog-plugins -paketin asentamisen.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Valitse Python-konsoli valintaruutu ja sulje ikkuna.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/fi/plugin-send-by-mail.page eog-3.27.90/help/fi/plugin-send-by-mail.page --- eog-3.26.2/help/fi/plugin-send-by-mail.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,48 +0,0 @@ - - - - - - Liitä ja lähetä kuvia sähköpostilla. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Lähetä kuvia sähköpostilla - -

Kuvakatselimeen on saatavilla painike, joka helpottaa kuvien lähettämistä sähköpostilla.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

Tämän ominaisuuden käyttöönotto vaatii eog-plugins -paketin asentamisen.

- - -

Ominaisuus vaatii, että sähköpostitili on yhdistetty Evolution-ohjelmaan.

- - - - - diff -Nru eog-3.26.2/help/fi/plugin-slideshow-shuffle.page eog-3.27.90/help/fi/plugin-slideshow-shuffle.page --- eog-3.26.2/help/fi/plugin-slideshow-shuffle.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,42 +0,0 @@ - - - - - - - Diaesityksen kuvien ilmestymisjärjestyksen sekoittaminen. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Sekoita diaesityksen järjestys - -

Valokuvien esitysjärjestys diaesityksessä on mahdollista sekoittaa.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

Tämän ominaisuuden käyttöönotto vaatii eog-plugins -paketin asentamisen.

- - diff -Nru eog-3.26.2/help/fi/plugins.page eog-3.27.90/help/fi/plugins.page --- eog-3.26.2/help/fi/plugins.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,88 +0,0 @@ - - - - - - Hanki ominaisuuksia lisäosia asentamalla. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Lisäosat - -

Kuvakatselimeen saa lisäosia asentamalla eog-plugins -paketin. Lisäosat laajentavat kuvakatselimen toimintaa esimerkiksi alla olevin tavoin.

- - -

eog-plugins -paketin voi asentaa Linux-jakelun pakettihallintasovelluksen kautta.

- - - -

asenna eog-plugins

- - - - -

eog-plugins sisältää seuraavat ominaisuudet:

- - - -

Päivämäärä tilapalkissa: Lisää kuvan luontipäivämäärän ikkunan tilapalkkiin.

- - -

Exif-näkymä: Luetteloi digitaalisen valokuvan ottamiseen käytetyt kameran asetukset ja tilastoja kuvasta.

- - -

Koko näytön tausta: Mahdollistaa taustavärin vaihtamisen koko näytön tilassa.

- - -

Kaksoisnapsauta koko näytön tilaan: Mahdollistaa koko näytön tilaan siirtymisen kaksoisnapsautuksella.

- - -

Kartta: Näyttää digitaalisen kuvan kuvauspaikan kartalla.

- - -

PicasaWeb lähettäjä: Lähettää kuvia PicasaWeb:iin.

- - -

Python-konsoli: Lisää Python-komentotulkin kuvakatselimeen.

- - -

Lähetä sähköpostilla: Mahdollistaa kuvan lähettämisen ystävälle sähköpostin liitteenä.

- - -

Diaesitys-sekoitus: Sekoittaa diaesityksen esitysjärjestyksen.

- - -

Zoomaa kuva sopimaan leveyteen: Muuttaa kuvan suurennusta siten, että kuva mahtuu leveydeltään ikkunaan.

- - - - -

Lisäosia voi hallita asetusikkunan lisäosavälilehdeltä.

- - - diff -Nru eog-3.26.2/help/fi/plugin-zoom-width.page eog-3.27.90/help/fi/plugin-zoom-width.page --- eog-3.26.2/help/fi/plugin-zoom-width.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - Kuvan leveyden sovittaminen ikkunan leveyteen. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Suurenna ikkunan leveyteen sopivaksi - -

Kuvat saa suurennettua täyttämään ikkunan koko leveyden lisäosalla Zoomaa kuva sopimaan leveyteen.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

Tämän ominaisuuden käyttöönotto vaatii eog-plugins -paketin asentamisen.

- - diff -Nru eog-3.26.2/help/fi/preferences.page eog-3.27.90/help/fi/preferences.page --- eog-3.26.2/help/fi/preferences.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,99 +0,0 @@ - - - - - - Kuvanäkymä, diaesitys ja lisäosat. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Asetukset -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Kuvanäkymän asetukset - - - - Kuvan parannukset -

Jos Pehmennä kuvat loitonnettaessa on valittuna, suurennettuja ja pienennettyjä kuvia pehmennetään. Pehmennys parantaa epätarkkojen kuvien laatua rosoisia reunoja tasoittamalla.

-

Automaattinen asento -asetuksen ollessa käytössä kuvat kierretään automaattisesti niiden Exif-datan perusteella. Exif-data on kuvaan digitaalisen kameran tallentamaa lisätietoa, ja se voi sisältää tiedon kameran asennosta kuvaustilanteessa. Jos automaattinen asento on käytössä, pystykuvat kierretään automaattisesti oikeaan asentoon. Kierretyn kuvan voi tallentaa, mutta sitä ei tehdä automaattisesti.

-

Automaattinen asento toimii vain valokuvilla, joiden Exif-dataan kamera on lisännyt tiedon kameran asennosta.

- - - Läpinäkyvät osat -

Jos kuvassa on läpinäkyviä osia, voit valita, kuinka ne näytetään:

- - -

Taustaruudukkona:

-

Korvaa kaikki kuvan läpinäkyvät osat kuvasta ruudukkokuviolla.

- - -

Mukautettuna värinä:

-

Korvaa kaikki kuvan läpinäkyvät osat värinvalintapainikkeesta valitulla värillä.

- - -

Taustavärinä:

-

Korvaa läpinäkyvät osat taustavärillä, jos taustaväriksi on määritetty Mukautettu väri Tausta-osiossa.

- - - - -
- - -
-Diaesityksen asetukset - -

Seuraavia diaesityksen asetuksia voi muokata:

- - -

Kuvan suurennos -otsikon alta voi valita, suurennetaanko näyttöä pienemmät kuvat täyttämään käytettävissä olevan tilan.

- - -

Jakso-otsakkeen alta voi valita, kuinka monta sekuntia kuva pysyy näytöllä (1 - 100 sekuntia) ennen kuvan vaihtumista.

- - -

Valitsemalla Kiertävä esitys diaesitys alkaa loputtuaan alusta. Muussa tapauksessa diaesitys alkaa valitusta kuvasta ja loppuu kansion viimeiseen kuvaan.

- - -
- - -
-Lisäosien asetukset - - - - -

Täältä voi valita, mitkä lisäominaisuudet otetaan ja mitkä poistetaan käytöstä. Vasemmalla oleva kuva esittää oletuksena saatavilla olevia lisäosia.

- -

Useita muita lisäosia saa käyttöön asentamalla eog-plugins -paketin. Paketin asentamisen jälkeen on mahdollista ottaa käyttöön oikealla puolella olevassa kuvassa esiintyviä lisäosia.

-
- - diff -Nru eog-3.26.2/help/fi/print.page eog-3.27.90/help/fi/print.page --- eog-3.26.2/help/fi/print.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Kuvan tulostaminen - -

Avoinna olevan kuvan tulostaminen onnistuu seuraavasti:

- - - -

Click Print….

- - -

Valitse käytettävä tulostin ja tulostettavien kopioiden määrä Yleiset-välilehdeltä.

- - -

Kuvan asetukset välilehdeltä voi muuttaa kuvan sijaintia ja kokoa.

-

Kuvan sijainnin voi määrittää myös siirtämällä sitä esikatselualueella.

- - -

Jos käytössäsi on laadukasta valokuvapaperia, valitse oikea Paperin tyyppi Sivun asetukset -välilehdeltä. Parhaan mahdollisen tulostuslaadun saavuttamiseksi kannattaa valita korkealaatuiset tulostusasetukset Kuvan laatu -välilehdeltä.

- - -

Napsauta Tulosta.

- - - -

Huomaa, että joitain edellä mainittuja välilehtiä ei välttämättä tulostinmallista riippuen ole olemassa. Jotkin tulostusajurit eivät salli asetusten muokkaamista. Jos esimerkiksi Kuvan laatu -välilehteä ei näy, se tarkoittaa luultavasti sitä, että käytössä olevat tulostusajurit eivät tue näiden asetusten muuttamista.

- - diff -Nru eog-3.26.2/help/fi/rename-multiple.page eog-3.27.90/help/fi/rename-multiple.page --- eog-3.26.2/help/fi/rename-multiple.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,80 +0,0 @@ - - - - - - - Uudelleennimeä ja numeroi useita kuvia. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Nimeä useita kuvia uudelleen - -

Useiden kuvien uudelleennimeäminen siten, että uudet nimet ovat yhtenäisiä ja numeroituja, onnistuu seuraavasti:

- - - -

Avaa kuvakokoelma F9-näppäimellä.

- - -

Valitse uudelleennimettävät kuvat kuvakokoelmasta yksi kerrallaan Ctrl-näppäin pohjassa.

-

Vaihtoehtoisesti kaikki kuvat voi valita näppäinyhdistelmällä CtrlA.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

Uudelleennimetyt kuvat tallennetaan oletuksena avoinna olevaan kansioon. Tallennuskohdetta voi muuttaa Kohdekansio-pudotusvalikosta.

- - -

Kirjoita nimien muoto Tiedostonimen muoto kenttään. Tiedostonimen esikatselu kertoo, miltä uudet tiedostonimet näyttävät. Eri uudelleennimeämisvaihtoehtoja esitellään alla olevassa -osiossa.

- - -

Varmista, että Tiedostonimen muoto -pudotusvalikosta on valittu vaihtoehto "samassa muodossa" ellet halua muuntaa kuvien tiedostomuotoa.

- - -

Napsauta Tallenna nimellä ja kuvat uudelleennimetään.

- - - - - -
- Tiedostonimen muodon valitseminen -

Kuvien uudet tiedostonimet luodaan Tiedostonimen muoto-tekstikentän sisällön pohjalta.

- - -

Alkuperäisen tiedostonimen voi säilyttää osana uutta tiedostonimeä jättämällä %f-koodin nimikenttään.

-

Jos Tiedostonimen muoto on esimerkiksi pariisi_%f, kuvien kukka.jpg, talo.jpg ja kissa.jpg uudet nimet olisivat pariisi_kukka.jpg, pariisi_talo.jpg ja pariisi_kissa.jpg.

- - -

Koodilla %n kuvat numeroidaan Asetukset-osiossa valitusta luvusta alkaen.

-

Jos Tiedostonimen muoto on esimerkiksi auringonlasku_%n, kuvien kukka.jpg, talo.jpg ja kissa.jpg uudet nimet olisivat auringonlasku_2.jpg, auringonlasku_3.jpg ja auringonlasku_1.jpg. (Kuvat numeroidaan alkuperäisten nimien mukaisessa aakkosjärjestyksessä.)

- - -
- - diff -Nru eog-3.26.2/help/fi/shortcuts.page eog-3.27.90/help/fi/shortcuts.page --- eog-3.26.2/help/fi/shortcuts.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,168 +0,0 @@ - - - - - - Kaikkien näppäinoikoteiden luettelo. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Pikanäppäimet - -

Alla olevaan luetteloon on kerätty kaikki kuvakatselimen pikanäppäimet.

- -
- Avaaminen, sulkeminen, tallentaminen ja tulostaminen - - - - - - - - - - - - - - - - - - - - - - - - - -

Avaa kuva

CtrlO

Tallenna kuva samalla nimellä

CtrlS

Tallenna kuvasta kopio uudella nimellä

VaihtoCtrlS

Tulosta kuva

CtrlP

Sulje ikkuna

CtrlW

Aseta kuva työpöydän taustakuvaksi

CtrlF8

-
- -
- Kuvien katselu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Siirry edelliseen kuvaan

Askelpalautin / Vasen

Siirry seuraavaan kuvaan

Välilyönti / Oikea

Siirry ensimmäiseen kuvaan

AltKoti

Siirry viimeiseen kuvaan

AltLoppuun

Siirry satunnaiseen kuvaan

CtrlM

Näytä kuvakokoelma

F9

Siirry koko näytön tilaan

F11

Näytä diaesitys

F5

Normaali koko

Ctrl0 (Nolla)

Paras sovitus

F

Siirrä suurta kuvaa

Altnuolinäppäimet

-
- -
- Kopioi kuva toiseen ohjelmaan - - - - - -

Kopioi

CtrlC

-
- -
- Lähennä, loitonna ja kierrä - - - - - - - - - - - - - - - - - -

Lähennä

+

Loitonna

-

Kierrä myötäpäivään

CtrlR

Kierrä vastapäivään

VaihtoCtrlR

-
- -
- Muut - - - - - - - - - - - - - - - - - -

Näytä sivupalkki

CtrlF9

Avaa kuvan ominaisuudet

AltEnter

Kumoa

CtrlZ

Ohje

F1

-
- diff -Nru eog-3.26.2/help/fi/slideshow.page eog-3.27.90/help/fi/slideshow.page --- eog-3.26.2/help/fi/slideshow.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Diaesitys - -

Kansiossa olevien kuvien katsominen diaesityksenä onnistuu seuraavasti:

- - - -

Avaa yksi kansion kuvista.

- - -

Click Slideshow or press - F5.

-

Diaesitys alkaa koko näytön tilassa. Kuva vaihtuu muutaman sekunnin välein. Diaesityksessä voi liikkua eteen- ja taaksepäin nuolinäppäimillä (Oikea eteenpäin ja Vasen taaksepäin).

- - -

Diaesityksen voi lopettaa Esc tai F5 -näppäimillä.

- - - -

Kuvien esitysaikaa diaesityksessä voi muuttaa asetuksista. Voit lukea aiheesta lisää diaesityksen asetukset -sivulta.

- - diff -Nru eog-3.26.2/help/fi/translate.page eog-3.27.90/help/fi/translate.page --- eog-3.26.2/help/fi/translate.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - Käännä Kuvakatselinta - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Auta käännöstyössä -

Kuvakatselimen käyttöliittymää ja ohjekirjaa kääntää maailmanlaajuinen vapaaehtoisyhteisö. Olet tervetullut liittymään käännöstyöhön.

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

Muiden GNOME:n kääntäjien kanssa voi keskustella irc:n välityksellä. Kanavalla olevat henkilöt elävät eri puolilla maailmaa, joten vastaus saattaa viivästyä aikavyöhyke-erojen takia. Suomenkielen kääntäjiä löytyy IRCnet:in kanavilta #gnome.fi ja #lokalisointi.

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/fi/view.page eog-3.27.90/help/fi/view.page --- eog-3.26.2/help/fi/view.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,76 +0,0 @@ - - - - - - Vaihda kuvia nuolinäppäimillä Vasen ja Oikea tai katso kuvia kuvakokoelmana. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - -Kansion kuvien katselu - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Kaikkien kansion kuvien selaaminen -

Kaikkien kansiossa olevien kuvien selaaminen on helppoa, sillä jokaista kuvaa tarvitse avata erikseen.

- - -

Avaa mikä tahansa selattavan kansion kuvista.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

Normaaliin näkymään voi palata Esc tai F11 -näppäimillä.

- - -
- - - - diff -Nru eog-3.26.2/help/fi/zoom.page eog-3.27.90/help/fi/zoom.page --- eog-3.26.2/help/fi/zoom.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fi/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Sami Jaktholm - sjakthol@outlook.com - 2013 - - - - Jukka Heikkilä - jutsco@gmail.com - 2010 - - - -Suurennus - -

Kuvaa voi lähentää ja loitontaa, jolloin kuvasta näytöllä näkyvä osa pienenee tai kasvaa. Lähentäminen ja loitontaminen mahdollistaa suurikokoisen kuvan yksityiskohtien tai kokonaisuuden tarkastelun.

- - - -

Kuvaa voi lähentää ja loitontaa hiiren rullalla. Kuva lähentyy vierittämällä rullaa ylöspäin ja loittonee vierittämällä alaspäin.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Sovita kuva ikkunan kokoon -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/fr/bug-filing.page eog-3.27.90/help/fr/bug-filing.page --- eog-3.26.2/help/fr/bug-filing.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,60 +0,0 @@ - - - - - - Signaler un bogue concernant le Visionneur d'images. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Rapport d'anomalie concernant le visionneur d'images -

Le Visionneur d'images est maintenu par une communauté de volontaires. Votre participation est la bienvenue.

- -

Si vous rencontrez des problèmes avec le visionneur d'images (par exemple, s'il s'arrête brutalement ou se comporte bizarrement), ou s'il manque une fonctionnalité que vous pensez qu'il devrait posséder, veuillez remplir un rapport d'anomalie en cliquant sur le lien . Les rapports d'anomalie sont la façon dont les développeurs de logiciels gardent trace des problèmes afin de les résoudre.

-

Pour participer, il est nécessaire d'avoir un compte qui vous permet de signaler des bogues et de faire des commentaires. Il est également nécessaire de s'enregistrer afin de pouvoir recevoir des mises à jour du statut de votre bogue par courriel. Si vous n'avez pas déjà un compte, il est possible d'en créer un en cliquant sur le lien New Account (nouveau compte).

-

Une fois inscrit, connectez-vous et cliquez sur NewCoreeog. Avant de signaler un bogue, il est important de lire le bug writing guidelines (guide sur le rapport de bogue) et de cliquer sur Browse (rechercher) pour voir si le bogue n'est pas déjà signalé.

-

Pour signaler votre bogue, choisissez une catégorie dans le menu Component (composant). Si la catégorie n'est pas clairement identifiable, choisissez general (général).

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

Un numéro d'identification (ID) est attribué à votre rapport et son statut est mis à jour au fur et à mesure qu'il est traité. Cela peut prendre un certain temps avant que les bogues ne soient résolus et il est possible que les développeurs vous demandent d'autres informations pour les aider à comprendre quel est le problème.

- diff -Nru eog-3.26.2/help/fr/commandline.page eog-3.27.90/help/fr/commandline.page --- eog-3.26.2/help/fr/commandline.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,79 +0,0 @@ - - - - - - Ligne de commande - La commande eog permet d'ouvrir un nombre illimité d'images de différentes façons. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -La ligne de commande - -

Pour démarrer le visionneur d'images depuis le terminal, saisissez eog.

-

Vous pouvez ouvrir un fichier spécifique en saisissant son nom complet après la commande eog :

-eog image.jpeg -

Vous pouvez ouvrir un dossier spécifique en saisissant son nom complet après la commande eog :

-dossier eog -

Pour voir toutes les images d'un dossier, vous pouvez préférer parcourir la collection d'images.

- -
- Ouverture d'une image en mode plein écran - eog --fullscreen image.jpeg -
- -
- Ouverture d'une image dans une nouvelle instance - eog --new-instance image.jpeg -
-
- Ouverture d'un dossier en mode diaporama - eog --slide-show Images/ -
- diff -Nru eog-3.26.2/help/fr/copy-paste.page eog-3.27.90/help/fr/copy-paste.page --- eog-3.26.2/help/fr/copy-paste.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,61 +0,0 @@ - - - - - - - - Copier/coller depuis le visionneur d'images vers une autre application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Copie et collage d'une image -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

L'image a été copiée dans le presse-papiers et elle peut maintenant être collée dans un document LibreOffice, une image Gimp ou un autre programme.

- - diff -Nru eog-3.26.2/help/fr/default.page eog-3.27.90/help/fr/default.page --- eog-3.26.2/help/fr/default.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ - - - - - - Faire que le visionneur d'images soit l'application par défaut pour regarder les images. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Ouverture des images dans le visionneur d'images par défaut -

Si vous souhaitez que le visionneur d'images soit l'application par défaut pour regarder certains types d'images :

- - - -

Dans le Navigateur de fichiers, cliquez droit sur le fichier et choisissez Propriétés.

- - -

Allez dans l'onglet Ouvrir avec. Une liste d'applications recommandées apparaît.

- - -

Sélectionnez Visionneur d'images et cliquez sur Définir par défaut.

-

Si Visionneur d'images n'apparaît pas dans la liste des applications recommandées, cliquez sur Afficher d'autres applications. Sélectionnez Visionneur d'images dans la liste qui apparaît et cliquez sur Définir par défaut.

- - -

Cliquez sur Fermer.

- - - -

À partir de maintenant, lorsque vous double-cliquez sur un fichier du même type, il s'ouvre dans le visionneur d'images.

- - diff -Nru eog-3.26.2/help/fr/desktop-background.page eog-3.27.90/help/fr/desktop-background.page --- eog-3.26.2/help/fr/desktop-background.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Définir votre image favorite comme arrière-plan ou papier peint du bureau. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Définition de l'image actuelle comme arrière-plan du bureau -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

Cela remplace immédiatement l'arrière-plan du bureau par l'image que vous êtes en train de regarder. Il vous est ensuite demandé si vous souhaitez modifier la manière de l'afficher en utilisant la boîte de dialogue des préférences de l'arrière-plan. Pour faire disparaître ce message, cliquez sur Masquer.

- diff -Nru eog-3.26.2/help/fr/develop.page eog-3.27.90/help/fr/develop.page --- eog-3.26.2/help/fr/develop.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Améliorer le Visionneur d'images. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Contribution au développement -

Le Visionneur d'images est développé et maintenu par une communauté de volontaires. Votre contribution est la bienvenue.

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/fr/documentation.page eog-3.27.90/help/fr/documentation.page --- eog-3.26.2/help/fr/documentation.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - Rejoindre l'équipe de documentation. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Contribution à la rédaction du manuel - -

La documentation du Visionneur d'images est maintenue par une communauté de volontaires. Votre participation est la bienvenue.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/fr/edit.page eog-3.27.90/help/fr/edit.page --- eog-3.26.2/help/fr/edit.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,79 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - -Modification et suppression d'une image - -
Modification d'une image -

Le visionneur d'image ne peut être utilisé que pour regarder les images ; il ne peut pas les modifier. Pour cela, utilisez une application d'édition d'image comme l'éditeur d'image GIMP. Pour ouvrir une image et la modifier dans une application différente :

- - -

Click Open With, -or right-click on the image.

- - -

Choisissez le programme que vous voulez utiliser pour modifier l'image.

- - -

Lorsque vous avez fini vos modifications, enregistrez-les et fermez l'application.

- - -

Le visionneur d'images détecte que l'image a été modifiée et vous demande alors s'il faut la recharger.

- - -
- -
-Suppression d'une image -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/fr/flip-rotate.page eog-3.27.90/help/fr/flip-rotate.page --- eog-3.26.2/help/fr/flip-rotate.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,92 +0,0 @@ - - - - - - Horizontal/vertical, sens horaire/anti-horaire - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Retournement ou rotation d'images - -

Si vos images sont mal orientées ou à l'envers, vous pouvez les retourner ou les faire pivoter afin que cela soit correct.

- - -
-Retournement d'une image - -

Cliquez sur Édition.

 -

Sélectionnez soit le miroir horizontal, soit le miroir vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Sinon, n'enregistrez pas l'image et elle retrouvera son orientation initiale la prochaine fois que vous l'ouvrirez.

- - -
- -
-Rotation d'une image - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Sinon, n'enregistrez pas l'image et elle retrouvera son orientation initiale la prochaine fois que vous l'ouvrirez.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotation horaire

CtrlR

Rotation anti-horaire

CtrlMajR

- -
- diff -Nru eog-3.26.2/help/fr/format-change.page eog-3.27.90/help/fr/format-change.page --- eog-3.26.2/help/fr/format-change.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,102 +0,0 @@ - - - - - - Vous pouvez convertir des images d'un format d'image à un autre. Vous pouvez faire cela par lot de plusieurs images. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Conversion en un autre format de fichier - -

Les images sont enregistrées dans un format de fichier spécifique, comme JPEG ou PNG. Vous pouvez les convertir d'un format de fichier en un autre.

- -
- Conversion d'une seule image dans un format de fichier différent - - -

Click Save As…. The -Save Image window will pop up.

- - -

Dans le champ Nom, modifiez l'extension du fichier en celle du format de fichier dans lequel vous souhaitez convertir votre image. L'extension du fichier est la partie du nom de fichier après le dernier point.

-

Par exemple, pour convertir un fichier JPEG (.jpg) en fichier Bitmap (.bmp) :

-

fichier d'origine : image.jpg

-

nouveau fichier : image.bmp

- - -

Cliquez sur Enregistrer et un nouveau fichier est enregistré dans le nouveau format. L'ancien fichier (dans l'ancien format) reste là où il était et n'est pas supprimé.

- - - -

Le visionneur d'images essaye de deviner dans quel format il doit enregistrer une image en se basant sur l'extension de fichier que vous avez choisie. S'il ne reconnaît pas l'extension de fichier saisie, ou si vous ne savez pas laquelle utiliser, cliquez sur Fichiers image pris en charge dans la boîte de dialogue Enregistrer l'image. Cela vous permet de sélectionner le format de fichier dans la liste déroulante.

- -
- -
- Conversion de plusieurs images en un autre format de fichier -

Vous pouvez convertir un grand nombre d'images d'un format de fichier en un autre d'un seul coup. C'est très pratique si vous avez un grand nombre d'images à convertir.

- - -

Dans la collection d'images, pressez et maintenez enfoncé la touche Ctrl et cliquez sur les images devant être converties une par une. Vous pouvez aussi pressez CtrlA pour sélectionner toutes les images.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

Les images sont enregistrées par défaut dans le dossier actuel. Pour les enregistrer ailleurs, modifiez le Dossier de destination.

- - -

Sélectionnez le format de fichier dans lequel vous voulez convertir les images à partir de la liste à choix multiples à droite de la boîte Format du nom de fichier.

- - -

Cliquez sur Enregistrer sous.

- - -
- - diff -Nru eog-3.26.2/help/fr/formats-save.page eog-3.27.90/help/fr/formats-save.page --- eog-3.26.2/help/fr/formats-save.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,61 +0,0 @@ - - - - - - JPEG, PNG, BMP et autres. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - - Formats pris en charge pour l'enregistrement d'images -

Le visionneur d'images est capable d'enregistrer des images dans les formats d'image suivants :

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

Il est possible d'enregistrer dans d'autres formats d'images en fonction de la configuration du système.

 - diff -Nru eog-3.26.2/help/fr/formats-view.page eog-3.27.90/help/fr/formats-view.page --- eog-3.26.2/help/fr/formats-view.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,70 +0,0 @@ - - - - - - - Le visionneur d'images peut afficher des images dans une large palette de format d'images dont PNG, JPEG et TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - - Formats d'image pris en charge - -

Le visionneur d'images est capable d'ouvrir les formats d'image suivants :

- -

ANI - Animation

 -

BMP - Bitmap de Windows

 -

GIF - Graphics Interchange Format

 -

ICO - Icône Windows

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap from the PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

Si le visionneur d'images ne reconnaît pas un format, il affiche le message d'erreur Impossible de charger l'image « nom_de_l'image »..

- diff -Nru eog-3.26.2/help/fr/index.page eog-3.27.90/help/fr/index.page --- eog-3.26.2/help/fr/index.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,80 +0,0 @@ - - - - - Aide pour le visionneur d'images Eye of GNOME. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Visionneur d'images Eye Of GNOME - Visionneur d'images Eye Of GNOME - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> Visionneur d'images Eye Of GNOME -
- Affichage des images -
- -
- Modification des images -
- -
- Impression des images -
- -
- Ajout de fonctionnalités supplémentaires - -
-
- Avancé -
- -
- Foire aux questions -
- -
- Trucs et astuces -
- -
- Comment participer -
- diff -Nru eog-3.26.2/help/fr/introduction.page eog-3.27.90/help/fr/introduction.page --- eog-3.26.2/help/fr/introduction.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Bienvenue dans le Visionneur d'images Eye of GNOME. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Introduction - -

Eye of GNOME est un visionneur d'images. Grâce à lui, vous pouvez regarder des images de presque tous les formats. Il peut gérer de grandes collections d'images, et peut afficher un diaporama. Vous pouvez aussi faire des modifications basiques aux images telles que les pivoter ou retourner ou les convertir dans un format de fichier différent.

- - diff -Nru eog-3.26.2/help/fr/legal.xml eog-3.27.90/help/fr/legal.xml --- eog-3.26.2/help/fr/legal.xml 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Ce travail est sous Cette œuvre est distribuée sous licence Creative Commons Paternité-Partage des Conditions Initiales à l'Identique 3.0 États-Unis..

-

Exceptionnellement, les propriétaires du copyright vous donnent la permission de copier, modifier et distribuer le code exemple contenu dans ce document sous les termes de votre choix, sans restriction.

- diff -Nru eog-3.26.2/help/fr/license.page eog-3.27.90/help/fr/license.page --- eog-3.26.2/help/fr/license.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/fr/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,65 +0,0 @@ - - - - - - - Informations légales. - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - - Licence -

Cette œuvre est distribuée sous licence Creative Commons Paternité-Partage des Conditions Initiales à l'Identique 3.0 Unported.

-

Vous êtes libre :

- - - <em>de partager</em> -

de reproduire, distribuer et communiquer cette création,

- - - <em>de modifier</em> -

d'adapter cette création,

- - -

selon les conditions suivantes :

- - - <em>Paternité</em> -

Vous devez citer le nom de l'auteur original de la manière indiquée par l'auteur de l'œuvre ou le titulaire des droits qui vous confère cette autorisation (mais pas d'une manière qui suggérerait qu'ils vous soutiennent ou approuvent votre utilisation de l'œuvre).

- - - <em>Partage dans les mêmes conditions</em> -

Si vous modifiez, transformez ou adaptez cette création, vous n'avez le droit de distribuer la création qui en résulte que sous un contrat identique à celui-ci.

- - -

Pour prendre connaissance du texte complet de la licence, consultez le site Web CreativeCommons ou lisez in extenso le contrat Commons.

- diff -Nru eog-3.26.2/help/fr/open.page eog-3.27.90/help/fr/open.page --- eog-3.26.2/help/fr/open.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Ouvrir une image dans une nouvelle fenêtre. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - - -Ouverture d'une image - -

Les images devraient s'ouvrir automatiquement dans le visionneur d'images quand vous double-cliquez dessus dans le navigateur de fichiers. Si ce n'est pas le cas il est possible que vous deviez changer le visionneur d'images en application par défaut pour afficher les images.

- -

Chaque image que vous double-cliquez, s'affiche dans une nouvelle fenêtre du visionneur d'images mais, si vous préférez, vous pouvez aussi afficher plusieurs images dans une seule fenêtre.

- -

Vous pouvez aussi ouvrir des images à partir du visionneur d'images lui-même :

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Sélectionnez l'image à ouvrir et cliquez sur Ouvrir.

 - - - diff -Nru eog-3.26.2/help/fr/plugin-exif-digital.page eog-3.27.90/help/fr/plugin-exif-digital.page --- eog-3.26.2/help/fr/plugin-exif-digital.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Afficher des informations comme les réglages et l'histogramme de l'appareil photo, la géolocalisation et la date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Affichage d'informations détaillées à propos d'une image - -

Un grand nombre d'informations supplémentaires sont incluses aux photos prises avec un appareil numérique lors de leur enregistrement, telles que la date de prise, les réglages d'exposition utilisés par l'appareil et même dans certains cas, l'emplacement où a été prise la photo.

- -

Cette rubrique vous montre comment accéder à ces informations.

- -
-Affichage de la date dans la barre d'état - -

Vous pouvez afficher la date de prise de l'image dans la barre d'état en bas de la fenêtre.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Données Exif détaillées -

Les informations détaillées enregistrées avec les photos numériques sont appelées les données Exif. Vous pouvez les afficher en installant un greffon du visionneur d'images.

- - - -

Pour ajouter cette fonctionnalité, vous devez avoir installé le paquet eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

Vous pouvez également voir les réglages de l'appareil photo utilisés pour prendre la photo dans la barre d'état. Sélectionnez l'option Affichage Exif dans l'onglet Greffons et cliquez sur Préférences. Cochez Afficher les paramètres de l'appareil dans la barre d'état.

- - -
- -
- Affichage de la carte de localisation de la photo -

Certains appareils sont capables d'attacher des informations de géolocalisation (geotags) aux photos numériques. Les geotags ne contiennent normalement que les coordonnées GPS (latitude et longitude) du lieu où a été prise la photo.

- - - -

Pour ajouter cette fonctionnalité, vous devez avoir installé le paquet eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

La carte affiche l'emplacement où une photo a été prise uniquement si des informations de géolocalisation sont attachées à la photo. De nombreux appareils photo n'attachent pas d'informations de géolocalisation à leurs photos.

-
- - - diff -Nru eog-3.26.2/help/fr/plugin-fullscreen-background.page eog-3.27.90/help/fr/plugin-fullscreen-background.page --- eog-3.26.2/help/fr/plugin-fullscreen-background.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - Permet le changement de la couleur de fond en mode plein écran - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Modifier la couleur de fond en mode plein écran - -

Si vous le désirez, il est possible de modifier la couleur de fond en mode plein écran.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

À partir de maintenant, en mode plein écran, la couleur de fond est celle que vous avez choisie.

- -

Pour ajouter cette fonctionnalité, vous devez avoir installé le paquet eog-plugins.

- - diff -Nru eog-3.26.2/help/fr/plugin-fullscreen-double-click.page eog-3.27.90/help/fr/plugin-fullscreen-double-click.page --- eog-3.26.2/help/fr/plugin-fullscreen-double-click.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,61 +0,0 @@ - - - - - - Activer le mode plein écran par un double-clic sur une image. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Plein écran sur double-clic - - - -

Si vous le désirez, il est possible de faire en sorte que les images soient affichées en plein écran lorsque vous double-cliquez dessus dans le visionneur d'images.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Maintenant un double-clic sur une image permet de basculer entre les modes plein écran et normal (fenêtré).

- - diff -Nru eog-3.26.2/help/fr/plugin-picasa.page eog-3.27.90/help/fr/plugin-picasa.page --- eog-3.26.2/help/fr/plugin-picasa.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,61 +0,0 @@ - - - - - - Envoyer facilement des images vers PicasaWeb directement depuis le visionneur d'images. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Envoi de photos vers <app>PicasaWeb</app> - -

PicasaWeb est un service d'album photo qui vous permet de partager des images avec des personne en ligne. Vous pouvez ajouter un bouton qui fournira un moyen pratique d'envoyer vos photos vers PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

Pour ajouter cette fonctionnalité, vous devez avoir installé le paquet eog-plugins.

- - diff -Nru eog-3.26.2/help/fr/plugin-python-console.page eog-3.27.90/help/fr/plugin-python-console.page --- eog-3.26.2/help/fr/plugin-python-console.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,71 +0,0 @@ - - - - - - La console Python peut être utilisée pour ajouter des fonctions supplémentaires et pour lancer des scripts dans le visionneur d'images. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Console Python - -

Le visionneur d'images possède un système de greffons qui utilise le langage de script Python. Si vous activez la Console Python, vous pouvez profiter d'un accès direct à un interpréteur Python à l'intérieur du visionneur d'images ; vous pouvez l'utiliser, par exemple, pour écrire des scripts ou manipuler les images à l'aide d'un algorithme.

- - - -

Pour ajouter cette fonctionnalité, vous devez avoir installé le paquet eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Cochez Console Python et cliquez sur Fermer.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/fr/plugin-send-by-mail.page eog-3.27.90/help/fr/plugin-send-by-mail.page --- eog-3.26.2/help/fr/plugin-send-by-mail.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,66 +0,0 @@ - - - - - - Envoyer facilement des images en les attachant à un nouveau courriel. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Envoi d'images par courriel - -

Vous pouvez ajouter un bouton qui vous permet d'envoyer en tout commodité des images à des personnes par courriel.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

Pour ajouter cette fonctionnalité, vous devez avoir installé le paquet eog-plugins.

- - -

Pour que cela fonctionne, la messagerie d'Evolution doit être paramétrée de façon à pouvoir se connecter à votre compte de messagerie électronique.

- - - - - diff -Nru eog-3.26.2/help/fr/plugin-slideshow-shuffle.page eog-3.27.90/help/fr/plugin-slideshow-shuffle.page --- eog-3.26.2/help/fr/plugin-slideshow-shuffle.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,60 +0,0 @@ - - - - - - - Afficher les photos dans un ordre aléatoire lors de l'affichage d'un diaporama. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Diaporama aléatoire - -

Il est possible de faire en sorte que les images soient affichées dans un ordre aléatoire quand vous lancez un diaporama.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

Pour ajouter cette fonctionnalité, vous devez avoir installé le paquet eog-plugins.

- - diff -Nru eog-3.26.2/help/fr/plugins.page eog-3.27.90/help/fr/plugins.page --- eog-3.26.2/help/fr/plugins.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,106 +0,0 @@ - - - - - - Installer des greffons pour accéder à des fonctionnalités supplémentaires. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Greffons - -

Vous pouvez installer le paquet eog-plugins pour obtenir des greffons supplémentaires pour le visionneur d'image. Les greffons apportent de nouvelles fonctionnalités comme celles énumérées ci-dessous.

- - -

Vous pouvez installer le paquet eog-plugins en utilisant le gestionnaire de paquets de votre distribution Linux.

- - - -

installer eog-plugins

- - - - -

Les fonctionnalités suivantes sont incluses dans eog-plugins :

- - - -

Date dans la barre d'état : afficher la date de l'image dans la barre d'état de la fenêtre.

- - -

Affichage Exif : afficher les réglages de l'appareil photo et les histogrammes pour les appareils photo numériques.

- - -

Arrière-plan du mode plein écran: autoriser la modification de l'arrière-plan en mode plein écran.

- - -

Plein écran sur double-clic: passer en mode plein écran avec un double-clic.

- - -

Carte : afficher la géolocalisation d'une photo numérique sur une carte.

- - -

Mise en ligne sur PicasaWeb : envoyer vos phots sur PicasaWeb.

- - -

Console Python : une console script Python pour le visionneur d'images.

- - -

Envoi par courriel : envoyer une image à un ami en l'attachant à un nouveau courriel.

- - -

Diaporama aléatoire : mélanger les images en mode diaporama.

- - -

Zoom en fonction de la largeur de l'image : régler le zoom pour ajuster la largeur complète de l'image à celle de la fenêtre.

- - - - -

Vous pouvez gérer les greffons dans l'onglet Greffons de la fenêtre des préférences.

- - - diff -Nru eog-3.26.2/help/fr/plugin-zoom-width.page eog-3.27.90/help/fr/plugin-zoom-width.page --- eog-3.26.2/help/fr/plugin-zoom-width.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,59 +0,0 @@ - - - - - - Ajuster le zoom pour faire correspondre la largeur complète de l'image à celle de la fenêtre. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Zoom en fonction de la largeur de l'image. - -

Activez le greffon Zoom en fonction de la largeur de l'image si vous voulez que les images s'étirent à la largeur complète de la fenêtre.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

Pour ajouter cette fonctionnalité, vous devez avoir installé le paquet eog-plugins.

- - diff -Nru eog-3.26.2/help/fr/preferences.page eog-3.27.90/help/fr/preferences.page --- eog-3.26.2/help/fr/preferences.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,117 +0,0 @@ - - - - - - Vue image, Diaporama et Greffons. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Préférences -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Préférences de la vue image - - - - Améliorations de l'image -

Sélectionnez Lisser l'image lors du zoom arrière pour activer le lissage de l'image quand vous zoomez en avant ou en arrière. Cela rend les images basse résolution (pixelisées) meilleur en adoucissant les bords dentelés.

-

Si vous activez l'Orientation automatique les images sont automatiquement pivotées en fonction de leurs métadonnées Exif. Il s'agit d'informations à propos de l'image qui sont insérées automatiquement par un appareil photo numérique et qui incluent des détails sur la façon dont l'appareil était pris en main lorsque la photo a été prise. Par exemple, quand l'orientation automatique est activée, les photos de portrait sont automatiquement tournées dans le bon sens. La rotation n'est pas sauvegardée tant que vous n'avez pas enregistré l'image pivotée.

-

L'orientation automatique ne fonctionne pas pour toutes les images ; seules les images prises avec un appareil qui enregistre les métadonnées d'information de l'image seront pivotées.

- - - Parties transparentes -

Sélectionnez une des options suivantes pour déterminer comment apparaîtront les zones transparentes d'une image, s'il y en a :

- - -

Comme un damier :

-

Affiche toute partie transparente d'une image comme un damier.

- - -

Couleur personnalisée :

-

Affiche toute partie transparente d'une image dans une couleur unie de votre choix. Cliquez sur le bouton du sélecteur de couleur pour choisir la couleur.

- - -

Comme l'arrière-plan :

-

Affiche toute partie transparente de l'image de la même couleur que celle de l'arrière-plan, si Couleur personnalisée dans la partie Arrière-plan est cochée sinon la couleur par défaut de l'arrière-plan est utilisée.

- - - - -
- - -
-Préférences du diaporama - -

Pour personnaliser les réglages du diaporama :

- - -

Dans Zoom de l'image vous pouvez choisir que les images qui sont plus petites que l'écran soient agrandies afin qu'elles remplissent l'écran.

- - -

Dans Suite vous pouvez choisir la durée d'affichage de chaque image (entre 1 et 100 secondes) avant le passage à la suivante.

- - -

cochez Suite en boucle si vous désirez que le diaporama se répète continuellement. Si la case n'est pas cochée, le diaporama démarre à l'image sélectionnée et se termine sur la dernière image du dossier.

- - -
- - -
-Préférences des greffons - - - - -

Cet onglet vous permet de sélectionner les greffons que vous souhaitez activer ou désactiver. L'image de gauche vous montre les greffons disponibles par défaut.

- -

Vous pouvez aussi installer le paquet eog-plugins qui contient un grand nombre de greffons fournissant des fonctionnalités supplémentaires. Après son installation, il vous sera possible d'activer des greffons additionnels tels que ceux affichés sur la figure de droite.

-
- - diff -Nru eog-3.26.2/help/fr/print.page eog-3.27.90/help/fr/print.page --- eog-3.26.2/help/fr/print.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/fr/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Impression d'une image - -

Pour imprimer l'image que vous êtes en train de regarder :

- - - -

Click Print….

- - -

Dans l'onglet Général choisissez l'imprimante à utiliser et le nombre de copies à imprimer.

- - -

Si vous allez dans l'onglet Paramètres de l'image, vous pouvez ajuster la position et la taille de l'image.

-

La position de l'image sur la page peut aussi être modifiée en la déplaçant dans l'aperçu.

- - -

Si vous utilisez du papier photo de haute qualité, allez dans l'onglet Mise en page et choisissez le Type de papier correct. Vous devriez aussi aller dans l'onglet Qualité de l'image et choisir un réglage de haute qualité afin d'obtenir la meilleure qualité d'image possible.

- - -

Cliquez sur Imprimer.

- - - -

Notez que certains onglets mentionnés ci-dessus ne sont pas affichés pour certains modèles d'imprimante. La raison est que le pilote de l'imprimante ne permet pas de modifier certains réglages. Ainsi, par exemple, si vous ne voyez pas l'onglet Qualité de l'image, c'est probablement parce que les pilotes d'imprimante que vous utilisez ne prennent pas en charge ces réglages.

- - diff -Nru eog-3.26.2/help/fr/rename-multiple.page eog-3.27.90/help/fr/rename-multiple.page --- eog-3.26.2/help/fr/rename-multiple.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/fr/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,98 +0,0 @@ - - - - - - - Renommer et numéroter automatiquement des ensembles d'images. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Renommage de plusieurs images à la fois - -

Si vous avez beaucoup d'images à renommer, peut-être afin qu'elles aient un format de nom standard, numéroté :

- - - -

Ouvrez la collection d'image en pressant la touche F9.

- - -

Sélectionnez toutes les images à renommer dans la collection d'images en pressant la touche Ctrl et en cliquant sur les images les unes après les autres.

-

Vous pouvez également presser CtrlA pour sélectionner toutes les images.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

Les images renommées sont enregistrées par défaut dans le dossier ouvert. Pour les enregistrer ailleurs, modifiez le Dossier de destination.

- - -

Utilisez la boîte Format du nom de fichier pour choisir un format de nom pour les images. L'Aperçu du nom de fichier vous montre à quoi vont ressembler les nouveaux noms de fichier. Consultez la section ci-dessous pour des conseils sur la façon de renommer les fichiers.

- - -

Assurez-vous que la liste à choix multiples Format du nom de fichier affiche inchangé à moins que vous ne fassiez une conversion d'images dans un format de fichier différent.

- - -

Cliquez sur Enregistrer sous et les images sont renommées.

- - - - - -
- Choix d'un format d'image -

Les noms de fichier des fichiers renommés sont déterminés par ce que vous mettez dans la boîte Format du nom de fichier.

- - -

Vous pouvez conserver le nom de fichier d'origine comme partie du nouveau nom de fichier en laissant le %f dans la boîte.

-

Par exemple, si vous saisissez paris_%f dans la boîte Format du nom de fichier, les images appelées fleur.jpg, maison.jpg et chat.jpg seront renommées paris_fleur.jpg, paris_maison.jpg et paris_chat.jpg.

- - -

L'ajout d'un %n numérote les images consécutivement, en commençant par le nombre choisi dans les Options.

-

Par exemple, si vous saisissez soleil_%n dans la boîte Format du nom de fichier, les images appelées fleur.jpg, maison.jpg et chat.jpg seront renommées soleil_2.jpg, soleil_3.jpg et soleil_1.jpg respectivement (elles sont numérotées dans l'ordre alphabétique de leur nom de fichier d'origine).

- - -
- - diff -Nru eog-3.26.2/help/fr/shortcuts.page eog-3.27.90/help/fr/shortcuts.page --- eog-3.26.2/help/fr/shortcuts.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/fr/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,186 +0,0 @@ - - - - - - Une liste de tous les raccourcis clavier. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Raccourcis clavier - -

Voici une liste de tous les raccourcis clavier que vous pouvez utiliser dans le visionneur d'images.

- -
- Ouverture, fermeture, enregistrement et impression - - - - - - - - - - - - - - - - - - - - - - - - - -

Ouvrir un fichier image

CtrlO

Enregistrer l'image sous le même nom

CtrlS

Enregistrer une copie de l'image actuelle sous un nouveau nom

CtrlMajS

Imprimer l'image actuelle

CtrlP

Fermer la fenêtre actuelle

CtrlW

Utiliser l'image en tant qu'arrière-plan du bureau

CtrlF8

-
- -
- Affichage des images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Aller à l'image précédente du dossier

Retour arrière / Flèche gauche

Aller à l'image suivante du dossier

Espace / Flèche droite

Aller à la première image du dossier

AltOrigine

Aller à la dernière image du dossier

AltFin

Choisir aléatoirement une image du dossier

CtrlM

Afficher la collection d'images

F9

Afficher en mode plein écran

F11

Afficher le diaporama

F5

Taille normale

Ctrl0 (zéro)

Taille idéale

F

Faire défiler une grande image

Altflèches

-
- -
- Copie d'une image pour la coller dans une autre application - - - - - -

Copier

CtrlC

-
- -
- Zoom et rotation - - - - - - - - - - - - - - - - - -

Agrandir

+

Réduire

-

Pivoter dans le sens horaire

CtrlR

Pivoter dans le sens anti-horaire

CtrlMajR

-
- -
- Autre - - - - - - - - - - - - - - - - - -

Afficher le panneau latéral

CtrlF9

Afficher les propriétés de l'image

CtrlEntrée

Annuler

CtrlZ

Aide

F1

-
- diff -Nru eog-3.26.2/help/fr/slideshow.page eog-3.27.90/help/fr/slideshow.page --- eog-3.26.2/help/fr/slideshow.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/fr/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,71 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Diaporama - -

Pour afficher toutes les images d'un dossier sous la forme d'un diaporama :

- - - -

Ouvrez une des images du dossier.

- - -

Click Slideshow or press - F5.

-

Un diaporama plein écran commence. Toutes les quelques secondes, une nouvelle image est affichée. Si vous voulez vous déplacer dans le diaporama plus rapidement ou revenir sur une image qui a été déjà affichée, vous pouvez utiliser les touches flèche gauche et flèche droite pour vous déplacer manuellement en arrière ou en avant.

- - -

Pour quitter le diaporama, pressez les touches Échap ou F5.

- - - -

Vous pouvez modifier des réglages du diaporama comme la durée d'affichage de chaque image. Consultez la rubrique Préférences du diaporama pour plus d'informations.

- - diff -Nru eog-3.26.2/help/fr/translate.page eog-3.27.90/help/fr/translate.page --- eog-3.26.2/help/fr/translate.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/fr/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ - - - - - - Localiser le Visionneur d'images - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Contribution à la traduction -

L'interface utilisateur et la documentation du Visionneur d'images est actuellement traduite par une communauté de volontaires dans le monde entier. Votre contribution est la bienvenue.

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

Vous pouvez discuter avec d'autres traducteurs de GNOME par le canal irc. Les personnes abonnées à ce canal sont disséminées dans le monde entier, vous n'aurez donc probablement pas de réponse rapide à cause des décalages horaires.

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/fr/view.page eog-3.27.90/help/fr/view.page --- eog-3.26.2/help/fr/view.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/fr/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,94 +0,0 @@ - - - - - - Appuyer sur flèche gauche et flèche droite pour changer d'image ou utiliser la collection d'images pour les afficher toutes. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - -Affichage de toutes les images d'un dossier - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Consultation des images contenues dans un dossier -

Si vous avez un dossier contenant plusieurs images, vous pouvez facilement les parcourir toutes sans avoir à les ouvrir individuellement.

- - -

Ouvrez n'importe quelle image du dossier que vous voulez parcourir.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

Pour revenir en affichage normal, pressez la touche Échap ou F11.

- - -
- - - - diff -Nru eog-3.26.2/help/fr/zoom.page eog-3.27.90/help/fr/zoom.page --- eog-3.26.2/help/fr/zoom.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/fr/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,80 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Claude Paroz - claude@2xlibre.net - 2006-2011 - - - - Vincent Untz - vuntz@gnome.org - 2007 - - - - Alain Lojewski - allomervan@gmail.com - 2011-2012 - - - - Sébastien Seguin - seb24b@free.fr - 2011 - - - - Bruno Brouard - annoa.b@gmail.com - 2011-12 - - - -Zoom - -

Vous pouvez zoomer en avant et en arrière pour afficher une partie plus ou moins grande de l'image à l'écran à la fois. Cela sert pour afficher une grande image entièrement ou si vous voulez examiner de petits détails d'une image.

- - - -

Vous pouvez faire un zoom en utilisant la souris. Faites défiler la molette vers le haut pour zoomer en avant, vers le bas pour zoomer en arrière.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom à la taille idéale en fonction de la fenêtre -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/gl/bug-filing.page eog-3.27.90/help/gl/bug-filing.page --- eog-3.26.2/help/gl/bug-filing.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - Complete un informe de erro para o Visor de imaxes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Informar dun problema co Visor de imaxes -

O Visor de imaxes é mantido pola comunidade de maneira voluntaria. Se quere participar, é benvido.

- -

Se sufre problemas co Visor de imaxes (por exemplo, se se colga ou se comporta de forma non esperada) ou se lle fata algunha característica que cree que debería ter, rechee un informe de erro premendo na ligazón . Os informes de erro son a base para que os desenvolvedores sigan os problemas e poidan arranxalos.

-

Para participar precisa unha conta, que lle permitirá obter acceso, informar de erros e facer comentarios. Tamén debe rexistrarse para poder recibir actualizacóns por correo-e sobre o estado do seu informe de erro. Se aínda non ten unha conta, simplemente prema na ligazón Nova conta para crear unha.

-

Cando teña unha ocnta, inicie sesión e prema en File a BugCoreeog. Antes de informar dun erro, lea a guía para informar dun erro e explore para ver se xa informara do erro.

-

Para informar dun erro, seleccione o compoñente no menú Component. Se non está seguro de a que compoñente pertence o seu erro, seleccione general.

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

Fornecerase un número de ID ao seu informe e o seu estado actualizarase segundo se vaia xestionando. Os erros poden tardar en ser solucionados e os desenvolvedores de software poden preguntarlle información adicional para axudalas a descubrir cal é o problema.

- diff -Nru eog-3.26.2/help/gl/commandline.page eog-3.27.90/help/gl/commandline.page --- eog-3.26.2/help/gl/commandline.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - Liña de ordes - A orde eog pode abrir calquera número de imaxes en varios modos. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -A liña de ordes - -

Para iniciar o Visor de imaxes desde un Terminal, escriba eog.

-

Para abrir un ficheiro en concreto escribindo o nome do ficheiro despois da orde eog:

-eog imaxe.jpeg -

Para abrir un ficheiro en concreto escribindo o nome do ficheiro despois da orde eog:

-cartafol de eog -

Para ver toda as imaxes nun cartafol á vez, pode querer examinar a galería de imaxes.

- -
- Abrir unha imaxe en modo a pantalla completa - eog --fullscreen imaxe.jpeg -
- -
- Abrir imaxe nunha instancia nova - eog --new-instance imaxe.jpeg -
-
- Abrir un cartafol en modo diaporama - eog --slide-show Imaxes/ -
- diff -Nru eog-3.26.2/help/gl/copy-paste.page eog-3.27.90/help/gl/copy-paste.page --- eog-3.26.2/help/gl/copy-paste.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - - - Como copiar/pegar desde o Visor de imaxes a outro aplicativo. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Copiar e pegar unha imaxe -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

A imaxe copiouse ao portapapeis, e agora pódese pegar nun documento de LibreOffice, unha imaxe de Gimp ou en calquera outro aplicativo.

- - diff -Nru eog-3.26.2/help/gl/default.page eog-3.27.90/help/gl/default.page --- eog-3.26.2/help/gl/default.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Facer que o Visor de imaxes sexa o aplicativo predeterminada para ver imaxes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Abrir imaxes, de forma predeterminada, no Visor de imaxes -

Se quere que o Visor de imaxes sexa o programa predeterminado que abre certos tipos de imaxes:

- - - -

No aplicativo de ficheiros, prema co botón dereito sobre o ficheiro e elixa Propiedades.

- - -

Vaia á lapela Abrir con. Aparecerá unha lista de Aplicativos recomendadas.

- - -

Seleccione o Visor de imaxes e prema Estabelecer como predeterminado.

-

Se o Visor de imaxes non está na lista de Aplicativos recomendados, prema en Mostrar outros aplicativos. Seleccione o Visor de imaxes e prema Estabelecer como predeterminado.

- - -

Prema Pechar.

- - - -

No futuro, cando prema dúas veces sobre un ficheiro do mesmo tipo, este abrirase no Visor de imaxes.

- - diff -Nru eog-3.26.2/help/gl/desktop-background.page eog-3.27.90/help/gl/desktop-background.page --- eog-3.26.2/help/gl/desktop-background.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Estabelecer a súa imaxe favorita como fondo do escritorio. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Estabelecer a imaxe actual como fondo de escritorio -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

Isto cambiará automaticamente o fondo de escritorio á imaxe que está vendo. Preguntaráselle se quere modificar a aparencia de imaxe usando a xanela de preferencias Fondo. Se preme Ocultar desaparecerá a mensaxe.

- diff -Nru eog-3.26.2/help/gl/develop.page eog-3.27.90/help/gl/develop.page --- eog-3.26.2/help/gl/develop.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Mellorar o Visor de imaxes. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Compartir Igual 3.0

- - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Axude no desenvolvemento -

O Visor de imaxes é mantido pola comunidade de maneira voluntaria. Se quere participar, é benvido.

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/gl/documentation.page eog-3.27.90/help/gl/documentation.page --- eog-3.26.2/help/gl/documentation.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - Únase o Equipo de documentación. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Compartir Igual 3.0

- - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Axuda a escribir documentación - -

O Visor de imaxes é mantido pola comunidade de maneira voluntaria. Se quere participar, é benvido.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/gl/edit.page eog-3.27.90/help/gl/edit.page --- eog-3.26.2/help/gl/edit.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - -Editar ou eliminar unha imaxe - -
Editar unha imaxe -

O visor de imaxes só se pode usar para ver imaxes; non pode editalas. Para ilo debe usar un aplicativo de edición de imaxes, tal como GIMP. Para abrir unha imaxe para editala nun aplicativo diferente:

- - -

Click Open With, -or right-click on the image.

- - -

Seleccione o aplicativo que usar para editar a imaxe.

- - -

Cando teña rematado de editar, gárdea e peche o outro aplicativo.

- - -

O Visor de imaxes detectará que a imaxe cambiou e recargaraa.

- - -
- -
-Eliminar unha imaxe -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/gl/flip-rotate.page eog-3.27.90/help/gl/flip-rotate.page --- eog-3.26.2/help/gl/flip-rotate.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - Horizontal e vertical, horario e antihorario - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Voltear ou rotar imaxes - -

Se as súas imaxes se mostran xiradas de forma incorrecta, pode voltealas ou rotalas para que se mostren correctamente.

- - -
-Voltear unha imaxe - -

Prema Editar.

 -

Seleccione Voltear horizontalmente ou Voltear verticalmente.

 - -

If you want to keep the picture flipped in this way, click Save.

-

De outra forma, non garde a imaxe e volverá á súa orientación orixinal a seguinte vez que a abra.

- - -
- -
-Rotar unha imaxe - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

De outra forma, non garde a imaxe e volverá á súa orientación orixinal a seguinte vez que a abra.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotar en sentido horario

CtrlR

Rotar en sentido antihorario

CtrlMaiúsR

- -
- diff -Nru eog-3.26.2/help/gl/format-change.page eog-3.27.90/help/gl/format-change.page --- eog-3.26.2/help/gl/format-change.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - Pode converter imaxes dun formato de imaxe a outro. Pode facelo para un lote de varios ficheiros. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Converter a un formato de ficheiro diferente - -

As imaxes gárdanse nun formato de ficheiro específico, como JPEG ou PNG. Pode converter dun formato de ficheiro a outro.

- -
- Converter unha única imaxe a un formato de ficheiro diferente - - -

Click Save As…. The -Save Image window will pop up.

- - -

No campo de nome, cambie a extensión de ficheiro ao tipo de ficheiro ao que quere converter a súa imaxe. A extensión do ficheiro é a parte do nome do ficheiro despois do punto.

-

Por exemplo, para converter un ficheiro en JPEG (.jpg) a un ficheiro en formato mapa de bits (BMP, .bmp):

-

ficheiro orixinal: imaxe.jpg

-

novo ficheiro: imaxe.bmp

- - -

Prema Gardar e gardarase un ficheiro novo no novo formato. O ficheiro antigo (no formato anterior) segurá onde estaba e non se eliminará.

- - - -

O Visor de imaxes tenta adiviñar o formato de ficheiro no que gardar a imaxe baseándose na extensión do ficheiro que elixa. Se non recoñece a extensión de ficheiro que escriba ou se non sabe cal usar, prema Ficheiros de imaxe compatíbeis na xanela Gardar imaxe. Isto permitiralle seleccionar un formato de ficheiro da lista despregábel.

- -
- -
- Converter varias imaxes a un tipo de ficheiro diferente -

Pode converter certo número de imaxes dun formato de ficheiro a outro dunha sola vez. Útil se ten unha morea de imaxes que precisa converter.

- - -

Na colección de imaxes, prema e manteña premida a tecla Ctrl e seleccione as imaxes que quere converter unha por unha. Alternativamente prema CtrlA para seleccionar todas as imaxes.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

De forma predeterminada, as imaxes gardaranse no cartafol actual. Se quere gardalas noutro lugar, seleccione o cartafol desde o menú despregábel Cartafol de destino.

- - -

Seleccione o formato de ficheiro ao que quere converter as imaxes desde o menú despregábel á dereita da caixa de entrada Formato do nome de ficheiro.

- - -

Prema Gardar.

- - -
- - diff -Nru eog-3.26.2/help/gl/formats-save.page eog-3.27.90/help/gl/formats-save.page --- eog-3.26.2/help/gl/formats-save.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - JPEG, PNG, BMP e outros. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - - Formatos compatíbeis para gardar imaxes -

O Visor de imaxes pode gardar imaxes nos seguintes formatos:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

Pode ser posíbel gardar outro formatos de imaxes, dependendo da configuración do sistema.

 - diff -Nru eog-3.26.2/help/gl/formats-view.page eog-3.27.90/help/gl/formats-view.page --- eog-3.26.2/help/gl/formats-view.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - - O Visor de imaxes pode mostrar imaxes de moitos tipos de formato de imaxe, incluíndo PNG, JPEG e TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - - Formatos de imaxe compatíbeis - -

O visor de imaxes pode abrir imaxes nos seguintes formatos:

- -

ANI - Animación

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO: iconas de Windows

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX: PC Paintbrush

 -

PNG: Portable Network Graphics

 -

PNM: Portable Anymap from the PPM Toolkit

 -

RAS: Sun Raster

 -

SVG: Scalable Vector Graphics

 -

TGA: Targa

 -

TIFF: Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

Se tenta abrir unha imaxe nun formato non compatíbel obterá un erro de Non foi posíbel cargar a imaxe «nome da imaxe».

- diff -Nru eog-3.26.2/help/gl/index.page eog-3.27.90/help/gl/index.page --- eog-3.26.2/help/gl/index.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - Axuda do Visor de imaxes Ollo de GNOME. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Visor de imaxes Ollo de GNOME - Visor de imaxes Ollo de GNOME - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- Ver imaxes -
- -
- Editar imaxes -
- -
- Imprimir imaxes -
- -
- Engadir caracerísticas adicionais - -
-
- Avanzadas -
- -
- Preguntas máis frecuencias -
- -
- Suxestións e trucos -
- -
- Involucrarse -
- diff -Nru eog-3.26.2/help/gl/introduction.page eog-3.27.90/help/gl/introduction.page --- eog-3.26.2/help/gl/introduction.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Benvido ao Visor de imaxes Eye of GNOME. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Introdución - -

Ollo de GNOME é un visor de imaxes. Con el pode ver imaxes de case calquera tipo. Pode xestionar grandes coleccións de imaxes e pode mostrar un pase de diapositivas. Tamén pode facer cambios básicos nas fotografías como rotalas ou voltealas, ou convertilas a un formato de ficheiro diferente.

- - diff -Nru eog-3.26.2/help/gl/legal.xml eog-3.27.90/help/gl/legal.xml --- eog-3.26.2/help/gl/legal.xml 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Este traballo está baixo a licenza Este traballo está licenciado baixo una Licenza Creative Commons Atribución - Compartir igual 3.0..

-

Como unha excepción especial, os propietarios do copyright danlle permiso para copiar, modificar e distribuír o código de exemplo contido neste documento baixo os termos da súa elección, sen restricións.

- diff -Nru eog-3.26.2/help/gl/license.page eog-3.27.90/help/gl/license.page --- eog-3.26.2/help/gl/license.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - - Información legal - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - - Licenza -

Este traballo está licenciado baixo una Licenza Creative Commons Atribución - Compartir igual 3.0 sen asistencia.

-

É libre de:

- - - <em>Compartir</em> -

Copiar, distribuír e comunicar publicamente a obra

- - - <em>Facer obras derivadas</em> -

Adaptar o traballo.

- - -

Baixo as seguintes condicións:

- - - <em>Atribución</em> -

Debe recoñecer os créditos da obra da maneira especificada polo autor ou o licenciatario (pero non dunha maneira que suxira que ten o seu apoio ou apoian o uso que fai da súa obra).

- - - <em>Compartir igual</em> -

Se modifica, transforma ou constrúe sobre este traballo debe distribuír o traballo resultando baixo unha licenza igual, similar ou compatíbel.

- - -

Pode encontrar o texto completo da licenza vexa o sitio web de CreativeCommons, ou lea o Escrito de Commons completo.

- diff -Nru eog-3.26.2/help/gl/open.page eog-3.27.90/help/gl/open.page --- eog-3.26.2/help/gl/open.page 2017-08-10 20:19:25.000000000 +0000 +++ eog-3.27.90/help/gl/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,39 +0,0 @@ - - - - - - As imaxes ábrense nunha xanela nova. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - - -Abrir unha imaxe - -

As imaxes deberían abrirse automaticamente no Visor de imaxes cando preme dúas veces sobre un ficheiro de imaxe no explorador de ficheiros. Se non é o caso, debe facer que o Visor de imaxes sexa o aplicativo predeterminado para ver imaxes.

- -

Cada imaxe sobre a que preme dúas veces abrirase nunha xanela nova de maneira predeterminada, pero tamén pode ver varias imaxes nunha xanela única se quere.

- -

Tamén pode abrir imaxes desde o mesmo visor de imaxes:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Seleccione a imaxe que quere abrir e prema Abrir.

 - - - diff -Nru eog-3.26.2/help/gl/plugin-exif-digital.page eog-3.27.90/help/gl/plugin-exif-digital.page --- eog-3.26.2/help/gl/plugin-exif-digital.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,91 +0,0 @@ - - - - - - Ver información como as preferencias da cámara e o histograma, xeolocalización e a data. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Ver información detallada sobre a foto - -

As imaxes tomadas cunha cámara dixital almacénanse con información adicional incluida nelas, tal como a data na que se tomaron, a configuracón de exposición usada na cámara e, nalgúns casos, incluso onde se tomou a foto.

- -

Este tema móstralle como pode acceder a esta información.

- -
-Mostrar a data na barra de estado - -

Pode mostrar a data na que se tomou unha fotografía na barra de stado, na parte inferior da xanela.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Datos Exif detallados -

A información detallada almacenada nas fotos dixitais chámase Datos Exif. Pode vela instalando un engadido para o Visor de imaxes.

- - - -

Para poder engadir esta funcionalidade precisará ter instalado eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

Tamén pode ver as configuracións da cámara usada para sacar a foto na barra de estado. Seleccione Mostrar Exif na lapela Engadidos e prema Preferencias. Marque Mostrar configuración da cámara na barra de estado.

- - -
- -
- Mostrar un mapa coa localización da foto -

Algunhas cámaras son capaces de anexa información de xeolocalización (xeo-etiquetas) ás fotos dixitais. Xeralmente, as xeo-etiquetas son coordenadas GPS (latitude e lonxitude) do lugar onde se tomou a foto.

- - - -

Para poder engadir esta funcionalidade precisará ter instalado eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

O mapa só mostrará a localización onde se tomou a imaxe se existe información de xeolocalización adxunta na foto. Moitas cámaras non anexan a información de xeolocalización ás fotos.

-
- - - diff -Nru eog-3.26.2/help/gl/plugin-fullscreen-background.page eog-3.27.90/help/gl/plugin-fullscreen-background.page --- eog-3.26.2/help/gl/plugin-fullscreen-background.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Permite cambiar a cor de fondo en modo a pantalla completa. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Modificar a cor de fondo a pantalla completa - -

Se o desexa, pode cambiar a cor de fondo en modo a pantalla completa.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Agora, cando estea no modo a pantalla completa, a cor de fondo será a que seleccionou.

- -

Para poder engadir esta funcionalidade precisará ter instalado eog-plugins.

- - diff -Nru eog-3.26.2/help/gl/plugin-fullscreen-double-click.page eog-3.27.90/help/gl/plugin-fullscreen-double-click.page --- eog-3.26.2/help/gl/plugin-fullscreen-double-click.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Activar o modo a pantalla completa premendo dúas veces sobre unha imaxe. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Pantalla completa con dobre pulsación - - - -

Se quere, pode facer que as imaxes se mostren a pantalla completa ao premer dúas veces sobre elas no Visor de imaxes.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Agora ao premer dúas veces sobre unha imaxe cambiará entre os modos a pantalla completa e normal (xanela).

- - diff -Nru eog-3.26.2/help/gl/plugin-picasa.page eog-3.27.90/help/gl/plugin-picasa.page --- eog-3.26.2/help/gl/plugin-picasa.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Subir imaxes de forma doada a PicasaWeb directamente desde o Visor de imaxes. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Subir fotos a <app>PicasaWeb</app> - -

PicasaWeb é un servizo de álbums de fotos que lle permite compartir imaxes en liña con xente. Pode engadir un botón de acceso directo que lle fornece unha forma rápida de subir imaxes a PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

Para poder engadir esta funcionalidade precisará ter instalado eog-plugins.

- - diff -Nru eog-3.26.2/help/gl/plugin-python-console.page eog-3.27.90/help/gl/plugin-python-console.page --- eog-3.26.2/help/gl/plugin-python-console.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - A consola de Python pódese usar para engadir funcións adicionais e executar scripts no Visor de imaxes. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Consola de Python - -

O visor de imaxes ten un sistema de engadidos que usa o linguaxe de «scripting» Python. Se activa a Consola de Python pode obter acceso ao intérprete de Python dentro do Visor de imaxes, que pode usar para escribir «scripts» ou manipular imaxes programando.

- - - -

Para poder engadir esta funcionalidade precisará ter instalado eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Marque Consola de Python e prema Pechar.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/gl/plugin-send-by-mail.page eog-3.27.90/help/gl/plugin-send-by-mail.page --- eog-3.26.2/help/gl/plugin-send-by-mail.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,42 +0,0 @@ - - - - - - Enviar imaxes de forma doada anexándoas a un correo-e novo. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Enviar imaxes por correo-e - -

Pode engadir un botón que fornece unha forma conveniente de enviar imaxes a persoas a través de correo electrónico.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

Para poder engadir esta funcionalidade precisará ter instalado eog-plugins.

- - -

Para esta tarefa o correo de Evolution debe estar configurado para conectarse á súa conta de correo-e.

- - - - - diff -Nru eog-3.26.2/help/gl/plugin-slideshow-shuffle.page eog-3.27.90/help/gl/plugin-slideshow-shuffle.page --- eog-3.26.2/help/gl/plugin-slideshow-shuffle.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - - Mostrar fotos en orde aleatoria ao reproducir un pase de diapositivas. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Diapositivas aleatorias - -

Pode facer que as súas imaxes se mostren de forma aleatoria ao velas no modo de pase de diapositivas.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

Para poder engadir esta funcionalidade precisará ter instalado eog-plugins.

- - diff -Nru eog-3.26.2/help/gl/plugins.page eog-3.27.90/help/gl/plugins.page --- eog-3.26.2/help/gl/plugins.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,82 +0,0 @@ - - - - - - Instalar engadidos para acceder a características adicionais. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Engadidos - -

Pode instalar o paquete eog-plugins para obter un conxunto de engadidos para o Visor de imaxes. Os engadidos engaden funcionalidades adicionais, como as listadas embaixo.

- - -

Pode instalar o paquete eog-plugins usando o xestor de paquetes da súa distribución GNU/Linux.

- - - -

instalar eog-plugins

- - - - -

As seguintes características incluense en eog-plugins:

- - - -

Data na barra de estado: mostra a data da imaxe na barra de estado da xanela.

- - -

Mostrar Exif: mostra a configuración da cámara e o histograma de fotos dixitais.

- - -

Fondon a pantalla completa: permítelle cambiar o fondo no modo a pantalla completa.

- - -

Pantalla completa con dobre clic: activa o modo a pantalla completa co dobre clic.

- - -

Mapa: mostra a xeolocalización da imaxe nun mapa.

- - -

Cargador de PicasaWeb: suba as súas imaxes a PicasaWeb

- - -

Consola de Python: unha consola de «scripting» de Python para o Visor de imaxes.

- - -

Enviar por correo-e: envía unha imaxe a un contacto como adxunto nun correo-e novo.

- - -

Diapositivas aleatorias: mostra as diapositivas de forma aleatoria.

- - -

Ampliar para axustar á anchura da imaxe: axusta a ampliación para que a anchura da imaxe se axuste á xanela.

- - - - -

Pode xestionar os engadidos na lapela de engadidos na xanela de Preferencias.

- - - diff -Nru eog-3.26.2/help/gl/plugin-zoom-width.page eog-3.27.90/help/gl/plugin-zoom-width.page --- eog-3.26.2/help/gl/plugin-zoom-width.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Axustar a ampliación para que a imaxe ocupe a anchura da pantalla. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Ampliar para axustar á anchura da pantalla - -

Active o engadido Amplia para axustar á anchura da imaxe se quere que as imaxes se expandan para rechar a anchura completa da xanela.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

Para engadir esta funcionalidade precisará instalar eog-plugins.

- - diff -Nru eog-3.26.2/help/gl/preferences.page eog-3.27.90/help/gl/preferences.page --- eog-3.26.2/help/gl/preferences.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,95 +0,0 @@ - - - - - - Vista de imaxes, diapositivas e engadidos. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Preferencias -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Preferencias do visor de imaxes - - - - Melloras de imaxe -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

Se activa a Orientación automática as imaxes rotaránse automaticamente segundo os seus metadatos Exif. É información sobre unha imaxe automaticamente insertadas pola cámara dixital e pode incluír detalles sobre como se sostivo a cámara cando se tomou a fotografía. Por exemplo, cando se usa a orientación automática, as opcións de retratos rótanse automaticamente de forma correcta. A rotación non se garda até que garda a imaxe rotada.

-

A orientación automática non funciona con todas as imaxes; só se rotarán as imaxes tomadas usando unha cámara que garda os metadatos de orientación Exif.

- - - Partes transparentes -

Seleccion eunha das opcións seguintes para determinar como se mostra as partes transparentes dunha imaxe, se hai algunha:

- - -

Como patrón de cadros:

-

Mostra calquera parte transparente da imaxe nun patrón de cadros.

- - -

Como cor personalizada:

-

Mostra calquera parte transparente da iamxe nun cor sólido que especifique premendo no botón de selección de cor.

- - -

Como fondo:

-

Mostra calquera parte transparente da imaxe na cor de Fondo, se Como cor personalizada, baixo Fondo está marcado. De outra forma, úsase a cor de fondo predeterminado.

- - - - -
- - -
-Preferencias da presentación - -

Para personalizar os axustes do pase de diapositivas:

- - -

Baixo Ampliación de imaxe pode selecionar se quere que as imaxes máis pequenas que a pantalla se expandan para axustarse á pantalla

- - -

Baixo Secuencia pode seleccionar cantos segundos se debería mostra cada imaxe (entre 1 e 100) antes de mostrar a seguinte imaxe.

- - -

Marque Secuencia en bucle se quere que as súas diapositivas se repitan cíclicamente. Se está desmarcada, a mostra comezará na imaxe seleccionada e terminará na última imaxe no cartafol.

- - -
- - -
-Preferencias dos engadidos - - - - -

Aquí pode marcar/desmarcar calquera característica adicional que queira activar ou desactivar. A imaxe da esquerda mostra os engadidos que dispoñíbeis por omisión.

- -

Tamén pode querer instalar o paquete eog-plugins que contén engadidos que fornezan certas características adicionais. Despois de facelo, poderá seleccionar que engadidos adicionais quere actiar, segundo poida velos á dereita.

-
- - diff -Nru eog-3.26.2/help/gl/print.page eog-3.27.90/help/gl/print.page --- eog-3.26.2/help/gl/print.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Imprimir imaxes - -

Para imprimir a imaxe que está vendo actualmente:

- - - -

Click Print….

- - -

Baixo a lapela Xeral, seleccione a impresora que quere usar e o número de copias que quere imprimir.

- - -

Na lapela Axustes de imaxe pode configurar a Posición e Tamaño da imaxe.

-

Tamén se pode axustar a posición da imaxe na páxina arrastrándoa na vista previa.

- - -

Se está usando un papel fotográfico de alta calidade, vaia á lapela Configuración de páxina e seleccione o Tipo de papel correcto. Tamén debería ir á lapela Calidade da imaxe e elixir un axuste de alta calidade para que así obteña a mellor calidade na foto.

- - -

Prema Imprimir.

- - - -

Note que algunhas lapelas mencionadas poden non mostrarse para certos tipos de impresora. É porque os controladores de impresión para esas impresoras non permiten cambiar algúns dos axustes. De tal forma que, se non ve a lapela Calidade de imaxe probabelmente significa que os controladores da impresora que está usando non admiten esa configuración.

- - diff -Nru eog-3.26.2/help/gl/rename-multiple.page eog-3.27.90/help/gl/rename-multiple.page --- eog-3.26.2/help/gl/rename-multiple.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ - - - - - - - Renomear e enumerar automaticamente lotes de fotografías. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Renomear varias imaxes á vez - -

Se ten moitas imaxes que quere renomear, quizais teña o seu propio estándar, ou un formato de nome numerado:

- - - -

Abra a colección de imaxes premendo F9.

- - -

Seleccione todas as imaxes que quere renomear da colección e imaxes mantendo premida a tecla Ctrl e premendo sobre as imaxes unha a unha.

-

Tamén pode premer CtrlA para seleccionar toda as imaxes no cartafol.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

De forma predeterminada, as imaxes gardaranse no cartafol actual. Para gardalas noutro lugar, cambie a Cartafol de destino.

- - -

Use a caixa Formato do nome do ficheiro para escoller o formato para o nome das imaxes. A Vista previa do nome do ficheiro móstralle como serán os nomes de ficheiro novos. Consulte na sección para obter consellos sobre como renomear ficheiros.

- - -

Asegúrese que o despregábel Formato do nome de ficheiro diga tal cual, cando menos que estea convertindo as images a un formato de ficheiro diferente.

- - -

Prema Gardar como e renomearase as imaxes.

- - - - - -
- Seleccione un formato de nome de ficheiro -

o nome do ficheiro dos ficheiros renomeados determinao o que escribe na caixa Formato do nome de ficheiro.

- - -

Pode manter o nome de ficheiro orixinal deixando %f na caixa.

-

Por exemplo, se escribe arouse_%f na caixa Formato do nome de ficheiro, as imaxes flor.jpg, casa.jpg e gato.jpg serán renomeadas a arousa_flor.jpg, arousa_casa.jpg e arousa_gato.jpg.

- - -

Engadir un %n numerará as imaxes consecutivamente, comezando polo número que seleccione baixo Opcións

-

Por exemplo, si escribe facenda_%n na caixa Formato do nome de ficheiro, as imaxes flor.jpg, casa.jpg e gato.jpg serán renomeadas a facenda_2.jpg, facenda_3.jpg e facenda_4.jpg. (Numerarase por orden alfabético segundo a orde orixinal dos seus nomes de ficheiro.)

- - -
- - diff -Nru eog-3.26.2/help/gl/shortcuts.page eog-3.27.90/help/gl/shortcuts.page --- eog-3.26.2/help/gl/shortcuts.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/gl/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,162 +0,0 @@ - - - - - - Unha lista de todos os atallos. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Atallos de teclado - -

Isto é unha lista de todos os atallos de teclado qeu pode usar no Visor de imaxes.

- -
- Abrir, pechar, gardar e imprimir - - - - - - - - - - - - - - - - - - - - - - - - - -

Abrir un ficheiro de imaxe

CtrlO

Gardar a imaxe co mesmo nome de ficheiro

CtrlS

Gardar unha copia da imaxe actual cun nome novo

ShiftCtrlS

Imprimir a imaxe actual

CtrlP

Pechar a xanela actual

CtrlW

Estabelecer a imaxe como fondo do escritorio

CtrlF8

-
- -
- Ver imaxes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Ir á imaxe posterior no cartafol

Back space / Left

Ir á seguinte imaxe no cartafol

Space bar / Right

Ir á primeira imaxe no cartafol

AltHome

Ir á última imaxe no cartafol

AltEnd

Escoller unha imaxe aleatoria no cartafol

CtrlM

Ver unha colección de imaxes

F9

Ver a pantalla completa

F11

Ver diapositivas

F5

Tamaño actual

Ctrl0 (cero)

Axuste óptimo

F

Desprazamento nunha imaxe grande

Altarrow keys

-
- -
- Copiar unha imaxe para pegala noutro aplicativo - - - - - -

Copiar

CtrlC

-
- -
- Ampliar e rotar - - - - - - - - - - - - - - - - - -

Ampliar

+

Reducir

-

Rotar no sentido horario

CtrlR

Rotar en sentido antihorario

MaiúsCtrlR

-
- -
- Outro - - - - - - - - - - - - - - - - - -

Ver panel lateral

CtrlF9

Ver as propiedades da imaxe

AltIntro

Desfacer

CtrlZ

Axuda

F1

-
- diff -Nru eog-3.26.2/help/gl/slideshow.page eog-3.27.90/help/gl/slideshow.page --- eog-3.26.2/help/gl/slideshow.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/gl/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Presentación de diapositivas - -

Para ver todas as imaxes dun cartafol como un pase de diapositivas:

- - - -

Abra unha das imaxes do cartafol.

- - -

Click Slideshow or press - F5.

-

Comezará un pase de diapositivas a pantalla completa. Cada poucos segundos mostrarase unha imaxe nova. Se quere moverse entre as diapositivas máis rapidamente, ou volver a unha imaxe que xa se mostrara pode usar os cursores Esquerdo e Dereito para moverse manualmente cara adiante e cara atrás.

- - -

Para salir da mostra de diapositivas, prema Esc ou F5.

- - - -

Pode cambiar a configuración do pase de diapositivos como o tempo que se mostra cada imaxe. Para obter máis información consulte o tema preferencias do pase de diapositivas.

- - diff -Nru eog-3.26.2/help/gl/translate.page eog-3.27.90/help/gl/translate.page --- eog-3.26.2/help/gl/translate.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/gl/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - Localizar o Visor de imaxes. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Axude na tradución -

A interface de usuario e documentación do Visor de imaxes é mantido pola comunidade de maneira voluntaria. Se quere participar, é benvido.

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

Pode conversar cos tradutores de GNOME empregando irc. As persoas nesa canle están por todo o mundo polo que pode que non resposten inmediatamente xa que están en fusos horarios distintos.

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/gl/view.page eog-3.27.90/help/gl/view.page --- eog-3.26.2/help/gl/view.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/gl/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,70 +0,0 @@ - - - - - - Prema Esquerda e Dereita para cambiar entre as imaxes ou use a colección de imaxes para mostralas todas. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Compartir Igual 3.0

- - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - -Ver todas as imaxes nun cartafol - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Examinar todas as imaxes nun cartafol -

Se ten un cartafol que contén varias fotografías pode examinalas todas sen ter que abrilas individualmente.

- - -

Abra calquera das imaxes no cartafol que quere examinar.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

Para volver á vista normal, prema Esc ou F11.

- - -
- - - - diff -Nru eog-3.26.2/help/gl/zoom.page eog-3.27.90/help/gl/zoom.page --- eog-3.26.2/help/gl/zoom.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/gl/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Compartir Igual 3.0

- - - - - Fran Dieguez - frandieguez@gnome.org - 2011-2012. - - - -Ampliación - -

Pode ampliar ou reducir para mostrar máis ou menos dunha imaxe na pantalla. É útil se quere ver unha imaxe grande completamente ou se quere inspeccionar os detealles dunha imaxe.

- - - -

Pode ampliar usando a roda do rato. Desprace a roda cara arriba para ampliar ou cara abaixo para reducir.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Ampliar para axustar á xanela -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/hu/bug-filing.page eog-3.27.90/help/hu/bug-filing.page --- eog-3.26.2/help/hu/bug-filing.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - A Képmegjelenítő hibáinak bejelentése. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -A Képmegjelenítővel kapcsolatos probléma bejelentése -

A képmegjelenítőt egy önkéntes közösség tartja karban. Közreműködését szívesen fogadjuk!

- -

Ha problémákat tapasztal a képmegjelenítő működésével kapcsolatban (például összeomlik vagy váratlan módon viselkedik), vagy hiányzik belőle egy Ön által fontosnak vélt funkció, akkor küldjön be egy hibajelentést a oldalon. A hibajelentéseket a szoftverfejlesztők használják a problémák nyomon követésére.

-

A részvételhez létre kell hoznia egy fiókot, amely lehetővé teszi a hibajelentések beküldését és a hibákhoz való hozzászólást. A regisztráció után a hozzászólásokat e-mailben is megkaphatja. Ha még nincs fiókja, akkor a New Account hivatkozásra kattintva létrehozhat egyet.

-

Ha létrehozta fiókját, jelentkezzen be, és kattintson a File a BugCoreeog hivatkozásokra. Hiba jelentése előtt olvassa el a hibajelentés-írási irányelveket, és ellenőrizze, hogy nincs-e már a hiba bejelentve.

-

A hiba bejelentéséhez válassza ki az összetevőt a Component menüben. Ha nem biztos benne, hogy melyik összetevőt érinti a hiba, válassza a general összetevőt.

-

Ha új szolgáltatást kér, válassza az enhancement lehetőséget a Severity menüben. Töltse ki a Summary és Description szakaszokat, és kattintson a Submit Bug gombra.

-

A hibajelentés kapni fog egy azonosítószámot, az állapota pedig a feldolgozása során frissülni fog. A hibák javítása hosszabb ideig is tarthat, és a szoftverfejlesztők további információkat kérhetnek a probléma kielégítő megoldásához.

- diff -Nru eog-3.26.2/help/hu/commandline.page eog-3.27.90/help/hu/commandline.page --- eog-3.26.2/help/hu/commandline.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - Parancssor - Az eog paranccsal tetszőleges számú fájlt nyithat meg különböző módokban. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -A parancssor - -

A képmegjelenítő Terminálból való elindításához írja be az eog parancsot.

-

Egy adott fájl megnyitásához írja be a fájlnevet az eog parancs után:

-eog kép.jpeg -

Egy adott mappa megnyitásához írja be a mappanevet az eog parancs után:

-eog mappa -

A mappában lévő összes kép megjelenítéséhez tallózza a képgalériát.

- -
- Kép megnyitása teljes képernyős módban - eog --fullscreen kép.jpeg -
- -
- Kép megnyitása új példányban - eog --new-instance kép.jpeg -
-
- Mappa megnyitása diavetítés módban - eog --slide-show Képek/ -
- diff -Nru eog-3.26.2/help/hu/copy-paste.page eog-3.27.90/help/hu/copy-paste.page --- eog-3.26.2/help/hu/copy-paste.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - - - Másolás és beillesztés a képmegjelenítőből másik alkalmazásba. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Kép másolása és beillesztése -

Egy kép a képmegjelenítőből másik alkalmazásba másolásához kattintson a jobb egérgombbal a képre, és válassza a Másolás menüpontot.

- -

A kép ekkor átmásolásra kerül a vágólapra, és beilleszthető egy LibreOffice dokumentumba, Gimp képbe vagy más alkalmazásba.

- - diff -Nru eog-3.26.2/help/hu/default.page eog-3.27.90/help/hu/default.page --- eog-3.26.2/help/hu/default.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - A képmegjelenítő alapértelmezett alkalmazássá tétele a képek megjelenítéséhez. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Képek megnyitása alapesetben a képmegjelenítővel -

Ha a képmegjelenítőt szeretné bizonyos képfájltípusokat alapesetben megjelenítő programmá tenni:

- - - -

A Fájlok alkalmazásban kattintson a jobb egérgombbal a fájlra, és válassza a Tulajdonságok menüpontot.

- - -

Lépjen a Megnyitás ezzel lapra. Megjelenik a Javasolt alkalmazások listája.

- - -

Válassza ki a Képmegjelenítőt, és nyomja meg a Beállítás alapértelmezettként gombot.

-

Ha a Képmegjelenítő nincs a Javasolt alkalmazások listájában, akkor nyomja meg a Más alkalmazások megjelenítése gombot. A megjelenő listából válassza ki a Képmegjelenítőt, és nyomja meg a Beállítás alapértelmezettként gombot.

- - -

Nyomja meg a Bezárás gombot.

- - - -

Amikor a jövőben duplán kattint egy ugyanolyan típusú fájlra, akkor az a képmegjelenítőben nyílik meg.

- - diff -Nru eog-3.26.2/help/hu/desktop-background.page eog-3.27.90/help/hu/desktop-background.page --- eog-3.26.2/help/hu/desktop-background.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Kedvenc képének beállítása háttérképként. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -A jelenlegi kép háttérképpé tétele -

Az éppen megjelenített kép háttérképként való beállításához válassza a Beállítás asztalháttérként menüpontot.

- -

Ez azonnal megváltoztatja az asztal háttérképét az éppen megjelenítettre. Ezután a program megkérdezi, hogy szeretné-e módosítani a kép megjelenését a háttér beállítóablakban. Ha az Elrejtés gombra kattint, akkor az üzenet eltűnik.

- diff -Nru eog-3.26.2/help/hu/develop.page eog-3.27.90/help/hu/develop.page --- eog-3.26.2/help/hu/develop.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Fejlessze a Képmegjelenítőt - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Segítsen a fejlesztésben -

A Képmegjelenítőt egy önkéntes közösség fejleszti és tartja karban. Közreműködését szívesen fogadjuk!

-

Ha szeretne közreműködni a Képmegjelenítő fejlesztésében, akkor a fejlesztőkkel a kapcsolatot IRC-n vagy a levelezőlistán veheti fel.

- - diff -Nru eog-3.26.2/help/hu/documentation.page eog-3.27.90/help/hu/documentation.page --- eog-3.26.2/help/hu/documentation.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - Csatlakozzon a dokumentációs csapathoz. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Segítsen dokumentációt írni - -

A Képmegjelenítő dokumentációját egy önkéntes közösség tartja karban. Közreműködését szívesen fogadjuk!

- -

A dokumentációs projekthez csatlakozáshoz keresse fel nyugodtan az irc csatornát vagy a levelezőlistát.

-

A projekt wiki oldala tartalmazza a legfontosabb információkat.

- - - diff -Nru eog-3.26.2/help/hu/edit.page eog-3.27.90/help/hu/edit.page --- eog-3.26.2/help/hu/edit.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Válassza a Megnyitás ezzel menüpontot a kép külső képszerkesztővel való megnyitásához. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - -Kép szerkesztése vagy törlése - -
Kép szerkesztése -

A képmegjelenítő csak képek megjelenítésére használható, szerkeszteni nem tudja azokat. Ehhez egy képszerkesztő alkalmazás szükséges, például a GIMP képszerkesztő. A kép másik alkalmazásban való megnyitásához:

- - -

Válassza a Megnyitás ezzel menüpontot, vagy kattintson a jobb egérgombbal a képre.

- - -

Válassza ki a kép szerkesztésére használandó alkalmazást.

- - -

Ha befejezte a szerkesztést, mentse el, és zárja be a másik alkalmazást.

- - -

A képmegjelenítő érzékelni fogja, hogy a kép megváltozott, és újratölti.

- - -
- -
-Kép törlése -

Egy fölöslegessé vált kép törléséhez kattintson a jobb egérgombbal a képre, és válassza a helyi menü Áthelyezés a Kukába menüpontját.

-
- - diff -Nru eog-3.26.2/help/hu/flip-rotate.page eog-3.27.90/help/hu/flip-rotate.page --- eog-3.26.2/help/hu/flip-rotate.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,67 +0,0 @@ - - - - - - Vízszintesen és függőlegesen, óra járása szerint és azzal ellentétesen - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Képek tükrözése vagy forgatása - -

Ha képeinek nem a megfelelő oldala van felfelé, vagy az oldalait fel szeretné cserélni, akkor tükrözheti vagy elforgathatja azokat.

- - -
-Kép tükrözése - -

Válassza a Szerkesztés menüt.

 -

Válassza a Vízszintes tükrözés vagy a Függőleges tükrözés menüpontot.

 - -

Ha a kép tükrözött állapotát szeretné megtartani, akkor válassza a Mentés menüpontot.

-

Ellenkező esetben ne mentse a képet, ekkor az a következő megnyitásakor visszaáll az eredeti tájolásába.

- - -
- -
-Kép forgatása - -

Vigye az egérmutatót a kép fölé. Két, nyilakat ábrázoló gomb fog megjelenni alul.

 -

Válassza a Kép forgatása 90 fokkal balra vagy a Kép forgatása 90 fokkal jobbra lehetőséget.

 - -

Ha a kép elforgatott állapotát szeretné megtartani, akkor válassza a Mentés menüpontot.

-

Ellenkező esetben ne mentse a képet, ekkor az a következő megnyitásakor visszaáll az eredeti tájolásába.

- - - -

A gyorsbillentyűket is használhatja:

- - - - - - - - - - -

Forgatás az órajárással egyező irányba

CtrlR

Forgatás az órajárással ellentétes irányba

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/hu/format-change.page eog-3.27.90/help/hu/format-change.page --- eog-3.26.2/help/hu/format-change.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,76 +0,0 @@ - - - - - - Képeket átalakíthat az egyik képformátumról a másikra. Ezt egyszerre több képen is végrehajthatja. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Átalakítás másik fájlformátumra - -

A képek adott, például JPEG vagy PNG fájlformátumban vannak mentve. A képeket átalakíthatja az egyik fájlformátumról egy másikra.

- -
- Egy kép átalakítása másik fájlformátumra - - -

Válassza a Mentés másként menüpontot. Megjelenik a Kép mentése ablak.

- - -

A név mezőben módosítsa a fájl kiterjesztését arra a fájlformátumra, amelyre át szeretné alakítani. A fájl kiterjesztése a név pont utáni része.

-

Egy JPEG (.jpg) fájl bitképpé (.bmp) alakításához:

-

eredeti fájl: kép.jpg

-

új fájl: kép.bmp

- - -

Nyomja meg a Mentés gombot, és az új kép elmentésre kerül az új formátumba. A régi fájl (a régi formátumban) változatlanul megmarad, és nem kerül törlésre.

- - - -

A képmegjelenítő a kiválasztott fájlkiterjesztés alapján megpróbálja kitalálni, hogy melyik fájlformátumba mentse a képet. Ha a program nem ismeri fel a fájlkiterjesztést, vagy nem tudja, melyiket kell használnia, akkor nyomja meg a Támogatott képfájlok gombot a Kép mentése ablakban. Ez lehetővé teszi a fájlformátum kiválasztását a legördülő listából.

- -
- -
- Több kép átalakítása másik formátumúvá -

Több képet egyetlen menetben alakíthat az egyik fájlformátumról a másikra. Ez akkor hasznos, ha sok képet szeretne átalakítani.

- - -

A képgalériában nyomja le és tartsa lenyomva a Ctrl billentyűt, és válassza ki az átalakítani kívánt képeket. Ennek alternatívájaként nyomja meg a CtrlA kombinációt az összes kép kiválasztásához.

- - -

Válassza a Mentés másként menüpontot. Megjelenik egy ablak (lásd alább).

- - - -

Az átalakított képek alapesetben az aktuális mappába kerülnek mentésre. A máshová való mentéshez módosítsa a Célmappát.

- - -

Válassza ki a képek átalakításához használandó cél fájlformátumot a Fájlnév formátuma mező jobb oldalán lévő legördülő listából.

- - -

Nyomja meg a Mentés gombot.

- - -
- - diff -Nru eog-3.26.2/help/hu/formats-save.page eog-3.27.90/help/hu/formats-save.page --- eog-3.26.2/help/hu/formats-save.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - JPEG, PNG, BMP és mások. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - - Képek mentéséhez támogatott formátumok -

A képmegjelenítő a következő formátumokba képes képeket menteni:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

A rendszer beállításaitól függően esetleg más képformátumokba is lehet menteni.

 - diff -Nru eog-3.26.2/help/hu/formats-view.page eog-3.27.90/help/hu/formats-view.page --- eog-3.26.2/help/hu/formats-view.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - - A képmegjelenítő képformátumok széles körének megjelenítésére képes, beleértve a PNG, JPEG és TIFF képeket. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - - Támogatott képformátumok - -

A képmegjelenítő a következő formátumú képek megnyitására képes:

- -

ANI - Animáció

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Windows ikon

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap a PPM eszközkészletből

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

Ha nem támogatott formátumú képet próbál megnyitni, akkor a Nem tölthető be a(z) „kép_neve” kép. hibaüzenet jelenik meg.

- diff -Nru eog-3.26.2/help/hu/index.page eog-3.27.90/help/hu/index.page --- eog-3.26.2/help/hu/index.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - Az Eye of GNOME képmegjelenítő súgója. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME képmegjelenítő - Eye of GNOME képmegjelenítő - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> Eye of GNOME képmegjelenítő -
- Képek megjelenítése -
- -
- Képek szerkesztése -
- -
- Képek nyomtatása -
- -
- További szolgáltatások hozzáadása - -
-
- Speciális -
- -
- Gyakori kérdések -
- -
- Tippek–trükkök -
- -
- Közreműködés -
- diff -Nru eog-3.26.2/help/hu/introduction.page eog-3.27.90/help/hu/introduction.page --- eog-3.26.2/help/hu/introduction.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Üdvözöljük az Eye of GNOME képmegjelenítőben. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Bevezetés - -

Az Eye of GNOME egy képmegjelenítő. Segítségével majdnem bármilyen típusú képet megjeleníthet. Képes nagy képgyűjtemények kezelésére, és diavetítésre. Alapszintű módosításokat is végrehajthat a képeken, például forgatást vagy tükrözést, illetve másik fájlformátumra történő átalakítást.

- - diff -Nru eog-3.26.2/help/hu/legal.xml eog-3.27.90/help/hu/legal.xml --- eog-3.26.2/help/hu/legal.xml 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Ez a munka a Creative Commons Attribution-Share Alike 3.0 United States License feltételei szerint használható.

-

Speciális kivételként a szerzői jog tulajdonosai az Ön által választott tetszőleges feltételek mellett, korlátozás nélkül engedélyezik a dokumentumban található példakódok másolását, módosítását és terjesztését.

- diff -Nru eog-3.26.2/help/hu/license.page eog-3.27.90/help/hu/license.page --- eog-3.26.2/help/hu/license.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - - Jogi információk. - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - - Licenc -

Ez a mű a CreativeCommons Attribution-Share Alike 3.0 Unported licenc feltételei szerint terjeszthető.

-

Jogodban áll:

- - - <em>Megosztani</em> -

Másolni, terjeszteni és továbbítani a művet.

- - - <em>Feldolgozni</em> -

Módosítani a művet.

- - -

A következő feltételek szerint:

- - - <em>Nevezd meg!</em> -

A szerző vagy a jogosult által meghatározott módon fel kell tüntetned a műhöz kapcsolódó információkat (pl. a szerző nevét vagy álnevét, a Mű címét).

- - - <em>Így add tovább!</em> -

Ha megváltoztatod, átalakítod, feldolgozod ezt a művet, az így létrejött alkotást csak a jelenlegivel megegyező licenc alatt terjesztheted.

- - -

A licenc teljes szövegéért lásd a CreativeCommons weboldalát, vagy a teljes Commons összefoglalót.

- diff -Nru eog-3.26.2/help/hu/open.page eog-3.27.90/help/hu/open.page --- eog-3.26.2/help/hu/open.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Képek megnyitása új ablakban. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - - -Kép megnyitása - -

A képek automatikusan a képmegjelenítőben nyílnak meg, ha duplán kattint azokra a Fájlok fájlböngészőben. Ha nem ez a helyzet, akkor a képmegjelenítőt az alapértelmezett alkalmazássá kell tenni a képek megjelenítéséhez.

- -

A dupla kattintás után minden kép új képmegjelenítő ablakban jelenik meg, de ez megváltoztatható, és több kép is megjeleníthető egy ablakban.

- -

A képeket megnyithatja a képmegjelenítőből is:

- -

Válassza a Megnyitás menüpontot (vagy nyomja meg a CtrlO kombinációt). Megjelenik a Kép megnyitása ablak.

 -

Válassza ki a megnyitni kívánt képet, és nyomja meg a Megnyitás gombot.

 - - - diff -Nru eog-3.26.2/help/hu/plugin-exif-digital.page eog-3.27.90/help/hu/plugin-exif-digital.page --- eog-3.26.2/help/hu/plugin-exif-digital.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,81 +0,0 @@ - - - - - - Olyan információk megjelenítése, mint a fényképezőgép beállításai és hisztogramja, földrajzi hely és dátum. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Részletes információk megjelenítése képekről - -

A digitális fényképezőgépekkel készített fényképekben sok extra információ van tárolva, például a készítésük dátuma, az expozíciós beállítások és egyes esetekben a képek készítésének helye is.

- -

Ez a témakör bemutatja ezen információk elérésének módját.

- -
-Dátum megjelenítése az állapotsorban - -

A kép készítésének dátumát megjelenítheti az ablak alján lévő állapotsorban.

-

Ehhez nyissa meg az alkalmazásmenüt a felső sávon, válassza a Beállítások menüpontot, majd lépjen a Bővítmények lapra Jelölje be a Dátum az állapotsorban bővítményt, majd nyomja meg a Bezárás gombot.

-
- -
- Részletes Exif adatok -

A digitális fényképekben tárolt részletes információkat Exif adatoknak nevezzük. Ezeket a képmegjelenítő egyik bővítményének telepítése után jelenítheti meg.

- - - -

A funkció használatához telepítenie kell az eog-plugins csomagot.

- - -

Az eog-plugins telepítése után nyissa meg az alkalmazásmenüt a felső sávon, válassza a Beállítások menüpontot. Jelölje be az Exif adatok megjelenítése négyzetet, és zárja be az ablakot.

- - -

Engedélyezze az Oldalsávot a fénykép készítéséhez használt fényképezőgép-beállítások megjelenítéséhez. A kép színeit és fényeit/árnyékait tartalmazó hisztogram megjelenítéséhez válassza az Exif megjelenítése bővítményt a Bővítmények lapon, és nyomja meg a Beállítások gombot. Jelölje be a Hisztogram alatt felsorolt, megjeleníteni kívánt hisztogramokat.

- - -

A képek készítésére használt fényképezőgép beállításait az állapotsoron is megjelenítheti. Válassza a Bővítmények lap Exif adatok megjelenítése bővítményét, majd nyomja meg a Beállítások gombot. Jelölje be a Fényképezőgép beállításainak megjelenítése az állapotsoron négyzetet.

- - -
- -
- Fényképek helyeit tartalmazó térkép megjelenítése -

Néhány fényképezőgép képes a földrajzi hely információit csatolni a digitális fényképekhez. Ezek az információk általában csak a fénykép készítési helyének GPS-koordinátái (szélesség és hosszúság).

- - - -

A funkció használatához telepítenie kell az eog-plugins csomagot.

- - -

Az eog-plugins telepítése után nyissa meg az alkalmazásmenüt a felső sávon, válassza a Beállítások menüpontot, és lépjen a Bővítmények lapra. Jelölje be a Térkép négyzetet, és zárja be az ablakot.

- - -

A térkép megjelenítéséhez engedélyezze az Oldalsávot.

- - -

A térkép csak akkor jeleníti meg a fénykép készítésének helyét, ha a fénykép tartalmazza a földrajzi hely információit. Ezeket számos fényképezőgép nem csatolja a képekhez.

-
- - - diff -Nru eog-3.26.2/help/hu/plugin-fullscreen-background.page eog-3.27.90/help/hu/plugin-fullscreen-background.page --- eog-3.26.2/help/hu/plugin-fullscreen-background.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Lehetővé teszi a teljes képernyős mód háttérszínének módosítását. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Teljes képernyő háttérszínének módosítása - -

Megváltoztathatja a háttérszínt teljes képernyős módban.

- -

Ehhez nyissa meg az alkalmazásmenüt a felső sávon, válassza a Beállítások menüpontot, és lépjen a Bővítmények lapra. Jelölje be a Teljes képernyős háttér bővítményt, majd nyomja meg a Beállítások gombot. Válassza ki a teljes képernyős módban használni kívánt színt, és zárja be az ablakot.

- -

Ezután teljes képernyős módban a háttérszín az imént kiválasztott lesz.

- -

A funkció használatához telepítenie kell az eog-plugins csomagot.

- - diff -Nru eog-3.26.2/help/hu/plugin-fullscreen-double-click.page eog-3.27.90/help/hu/plugin-fullscreen-double-click.page --- eog-3.26.2/help/hu/plugin-fullscreen-double-click.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Teljes képernyős mód aktiválása a képre való dupla kattintással. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Teljes képernyő dupla kattintásra - - - -

Beállíthatja, hogy a képek teljes képernyőn jelenjenek meg, ha duplán rájuk kattint a képmegjelenítőben.

- -

Ehhez válassza a SzerkesztésBeállítások menüpontot, majd lépjen a Bővítmények lapra. Jelölje be a Teljes képernyő dupla kattintásra bővítményt, és zárja be az ablakot.

- -

Ezután a képekre való dupla kattintással válthat a teljes képernyős és az ablakos megjelenítés között.

- - diff -Nru eog-3.26.2/help/hu/plugin-picasa.page eog-3.27.90/help/hu/plugin-picasa.page --- eog-3.26.2/help/hu/plugin-picasa.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - - Fényképek egyszerű feltöltése a PicasaWebre a képmegjelenítőből. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Fényképek feltöltése a <app>PicasaWebre</app> - -

A PicasaWeb egy fényképalbum-szolgáltatás, amely lehetővé teszi képek megosztását online. Képeit közvetlenül a képmegjelenítőből, egy gomb hozzáadásával is feltöltheti a PicasaWebre.

- -

Ehhez nyissa meg az alkalmazásmenüt a felső sávon, válassza a Beállítások menüpontot, majd lépjen a Bővítmények lapra, és jelölje be a PicasaWeb feltöltő bővítményt.

-

Ezután használhatja a kényelmes Feltöltés a PicasaWebre menüpontot.

- -

A funkció használatához telepítenie kell az eog-plugins csomagot.

- - diff -Nru eog-3.26.2/help/hu/plugin-python-console.page eog-3.27.90/help/hu/plugin-python-console.page --- eog-3.26.2/help/hu/plugin-python-console.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - A Python konzol kiegészítő funkciók hozzáadására és parancsfájlok futtatására használható a képmegjelenítőben. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Python konzol - -

A képmegjelenítő rendelkezik egy, a Python parancsnyelvet használó bővítményrendszerrel. Ha aktiválja a Python konzolt, akkor közvetlenül hozzáférhet a Python értelmezőhöz a képmegjelenítőből, amellyel például parancsfájlokat írhat vagy programozói eszközökkel manipulálhatja a képeket.

- - - -

A funkció használatához telepítenie kell az eog-plugins csomagot.

- - -

Az eog-plugins telepítése után nyissa meg az alkalmazásmenüt a felső sávon, válassza a Beállítások menüpontot, és lépjen a Bővítmények lapra.

- - -

Jelölje be a Python konzol jelölőnégyzetet, és nyomja meg a Bezárás gombot.

- - -

Válassza a Python konzol menüpontot a konzol megjelenítéséhez.

- - - - diff -Nru eog-3.26.2/help/hu/plugin-send-by-mail.page eog-3.27.90/help/hu/plugin-send-by-mail.page --- eog-3.26.2/help/hu/plugin-send-by-mail.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,39 +0,0 @@ - - - - - - Képek küldése e-mail mellékleteként. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Küldés e-mailben - -

Felvehet egy gombot, amely kényelmes lehetőséget biztosít a képek e-mailben való elküldésére.

- -

Ehhez nyissa meg az alkalmazásmenüt a felső sávon, válassza a Beállítások menüpontot, majd lépjen a Bővítmények lapra. Jelölje be a Küldés e-mailben bővítményt, majd nyomja meg a Bezárás gombot. Ezután megjelenik a Küldés e-mailben menüpont.

- -

A funkció használatához telepítenie kell az eog-plugins csomagot.

- - -

Ennek működéséhez az Evolution levelezőt be kell állítania postafiókja kezelésére.

- - - - - diff -Nru eog-3.26.2/help/hu/plugin-slideshow-shuffle.page eog-3.27.90/help/hu/plugin-slideshow-shuffle.page --- eog-3.26.2/help/hu/plugin-slideshow-shuffle.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - - - Fényképek megjelenítése véletlenszerű sorrendben diavetítéskor. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Diavetítés véletlenszerűen - -

A képeket megjeleníttetheti véletlenszerű sorrendben is diavetítéskor.

- -

Ehhez válassza a SzerkesztésBeállítások menüpontot, majd lépjen a Bővítmények lapra. Jelölje be a Diavetítés véletlenszerűen bővítményt, és zárja be az ablakot.

- -

A funkció használatához telepítenie kell az eog-plugins csomagot.

- - diff -Nru eog-3.26.2/help/hu/plugins.page eog-3.27.90/help/hu/plugins.page --- eog-3.26.2/help/hu/plugins.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,82 +0,0 @@ - - - - - - Telepítsen bővítményeket további szolgáltatások eléréséhez. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Bővítmények - -

A képmegjelenítő további bővítményeinek eléréséhez telepítse az eog-plugins csomagot. A bővítmények olyan extra szolgáltatásokat biztosítanak, mint az alábbiak.

- - -

Az eog-plugins csomagot a disztribúciója csomagkezelőjével telepítheti.

- - - -

Az eog-plugins telepítése

- - - - -

Az eog-plugins a következő szolgáltatásokat biztosítja:

- - - -

Dátum az állapotsoron: megjeleníti a kép dátumát az ablak állapotsorában.

- - -

Exif adatok megjelenítés: digitális fényképek fényképezőgép-beállításainak és hisztogramjainak megjelenítése.

- - -

Teljes képernyős háttér: Lehetővé teszi a teljes képernyős módban használt háttér megváltoztatását.

- - -

Teljes képernyő dupla kattintásra: Teljes képernyős mód aktiválása dupla kattintással.

- - -

Térkép: megjeleníti egy digitális fénykép földrajzi helyét a térképen.

- - -

PicasaWeb feltöltő: Képek feltöltése a PicasaWebre.

- - -

Python konzol: Python parancskonzol a képmegjelenítőben.

- - -

Küldés e-mailben: kép küldése e-mail mellékletként.

- - -

Diavetítés véletlenszerűen: összekeveri a képeket diavetítés módban.

- - -

Illesztés a kép szélességéhez: úgy módosítja a nagyítást, hogy a kép teljes szélessége elférjen az ablakban.

- - - - -

A bővítményeket a Beállítások ablak Bővítmények lapján kezelheti.

- - - diff -Nru eog-3.26.2/help/hu/plugin-zoom-width.page eog-3.27.90/help/hu/plugin-zoom-width.page --- eog-3.26.2/help/hu/plugin-zoom-width.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Megváltoztatja a nagyítást, hogy a kép teljes szélessége elférjen az ablakban. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Illesztés a kép szélességéhez - -

Az Illesztés a kép szélességéhez bővítmény aktiválásával a képek akkorára méreteződnek, hogy kitöltsék az ablak teljes szélességét.

- -

Ehhez válassza a SzerkesztésBeállítások menüpontot, majd lépjen a Bővítmények lapra. Jelölje be az Illesztés a kép szélességéhez bővítményt, és zárja be az ablakot.

- -

A funkció használatához telepítenie kell az eog-plugins csomagot.

- - diff -Nru eog-3.26.2/help/hu/preferences.page eog-3.27.90/help/hu/preferences.page --- eog-3.26.2/help/hu/preferences.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,91 +0,0 @@ - - - - - - Képmegjelenítés, diavetítés és bővítmények. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Beállítások -

Ez a témakör ismerteti a képmegjelenítőben módosítható összes beállítást. A beállítások megváltoztatásához nyissa meg az alkalmazásmenüt a felső sávon, és válassza a Beállítások menüpontot.

- - - -
-Képmegjelenítés beállításai - - - - Kép javításai -

Jelölje be a Képek simítása kicsinyítéskor négyzetet a kép simításának engedélyezéséhez kicsinyítéskor. Ez a cakkos élek kisimításával javítja a kis felbontású (pixeles) képek megjelenését.

-

Ha bejelöli az Automatikus tájolás négyzetet, akkor a képek automatikusan elforgatásra kerülnek az Exif metaadataiknak megfelelően. Ezeket az információkat a képről automatikusan beszúrja a digitális fényképezőgép, és azzal kapcsolatos információkat tartalmaznak, hogy a kép készítésekor a fényképezőgép melyik irányba volt tartva. Ha az automatikus tájolás engedélyezett, akkor például az álló képek automatikusan elforgatásra kerülnek. A forgatás addig nem kerül mentésre, amíg nem menti az elforgatott képet.

-

Az automatikus tájolás nem működik minden képpel, csak az Exif tájolási metaadatokat mentő fényképezőgéppel készültek esetén.

- - - Átlátszó részek -

Az alábbiak egyikének kiválasztásával megadhatja a képek átlátszó részeinek megjelenítési módját, ha vannak ilyenek:

- - -

Rácsmintaként:

-

A kép átlátszó részeinek megjelenítése rácsmintával.

- - -

Egyéni színként:

-

A kép átlátszó részeit a színválasztó gombra kattintással megadható homogén színnel jeleníti meg.

- - -

Háttérként:

-

A kép átlátszó részeit a Háttérszínnel jeleníti meg, ha a Háttér alatt az Egyéni szín be van jelölve. Ellenkező esetben az alap háttérszín kerül felhasználásra.

- - - - -
- - -
-Diavetítés beállításai - -

A diavetítés beállításainak személyre szabásához:

- - -

A Kép nagyítása alatt kiválaszthatja, hogy a képernyőnél kisebb képek fel legyenek-e nagyítva akkorára, hogy elfoglalják a képernyőt.

- - -

A Sorrend alatt kiválaszthatja, hogy az egyes képek hány másodpercig legyenek láthatók (1 és 100 között) a következő megjelenítése előtt.

- - -

Jelölje be a Végtelen sorozat jelölőnégyzetet a folyamatos ismétléshez. Ha nincs bejelölve, akkor a diavetítés a kiválasztott képnél fog elindulni, és a mappa utolsó képénél fog befejeződni.

- - -
- - -
-Bővítménybeállítások - - - - -

Itt bejelölheti vagy törölheti az engedélyezni vagy letiltani kívánt további szolgáltatásokat. A bal oldali kép az alapesetben engedélyezett bővítményeket ábrázolja.

- -

Telepítheti az eog-plugins csomagot is, amely számos további szolgáltatásokat biztosító bővítményt tartalmaz. A telepítése után további bővítményeket is aktiválhat, például a jobb oldali képen láthatókat.

-
- - diff -Nru eog-3.26.2/help/hu/print.page eog-3.27.90/help/hu/print.page --- eog-3.26.2/help/hu/print.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Válassza a Nyomtatás menüpontot, majd használja a lapokat a nyomtatási beállítások módosításához. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Kép nyomtatása - -

Az éppen megjelenített kép kinyomtatásához:

- - - -

Nyomja meg a Nyomtatás gombot.

- - -

Az Általános lapon válassza ki a használni kívánt nyomtatót és a nyomtatandó példányszámot.

- - -

A Képbeállítások lapon módosíthatja a kép Pozícióját és Méretét.

-

A kép pozícióját az előnézetben egyszerű húzással is módosíthatja.

- - -

Ha jó minőségű fotópapírt használ, akkor az Oldalbeállítás lapon válassza ki a megfelelő Papírtípust. Lépjen át a Képminőség lapra is, és válasszon magas minőségbeállítást a lehető legjobb fotóminőség eléréséhez.

- - -

Nyomja meg a Nyomtatás gombot.

- - - -

Ne feledje, hogy a fent említett lapok nem jelennek meg bizonyos nyomtatótípusok esetén. Ennek oka, hogy az adott nyomtatók nyomtató-illesztőprogramjai nem teszik lehetővé egyes beállítások módosítását. Ha például nem látja a Képminőség lapot, akkor valószínűleg az Ön által használt nyomtató-illesztőprogramok nem támogatják ezeket a beállításokat.

- - diff -Nru eog-3.26.2/help/hu/rename-multiple.page eog-3.27.90/help/hu/rename-multiple.page --- eog-3.26.2/help/hu/rename-multiple.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,72 +0,0 @@ - - - - - - - Képcsomagok automatikus átnevezése és számozása. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Sok kép átnevezése egyszerre - -

Ha sok képet szeretne átnevezni, hogy szabványos, számozott névformátumot használjanak:

- - - -

Nyissa meg a képgalériát az F9 billentyű megnyomásával.

- - -

Jelölje ki a képgalériában az átnevezni kívánt képeket a Ctrl billentyű lenyomva tartásával, és a képekre való kattintással.

-

Ennek alternatívájaként nyomja meg a CtrlA kombinációt az összes kép kiválasztásához.

- - -

Válassza a Mentés másként menüpontot. Megjelenik egy ablak, amely néhány fájlnévlehetőséget tartalmaz (lásd az alábbi képet).

- - -

Az átnevezett képek alapesetben az aktuális mappába kerülnek mentésre. A máshová való mentéshez módosítsa a Célmappát.

- - -

Használja a Fájlnév formátuma mezőt a képek elnevezési formátumának kiválasztásához. A Fájlnév előnézete megjeleníti az új fájlneveket. A fájlok átnevezésével kapcsolatos tanácsokért lásd a szakaszt lentebb.

- - -

Győződjön meg róla, hogy a Fájlnév formátuma melletti legördülő lista az ahogy van értéket tartalmazza, hacsak nem akarja a képeket másik képformátumra konvertálni.

- - -

Nyomja meg a Mentés másként gombot, és a képek átnevezésre kerülnek.

- - - - - -
- Fájlnévformátum kiválasztása -

Az átnevezett fájlok neveit a Fájlnév formátuma mező tartalma határozza meg.

- - -

Megtarthatja az eredeti fájlnevet az új fájlnév részeként a %f meghagyásával a mezőben.

-

Ha például a Párizs_%f értéket írja be a Fájlnév formátuma mezőbe, akkor a virág.jpg, ház.jpg és macska.jpg nevű képek új neve Párizs_virág.jpg, Párizs_ház.jpg és Párizs_macska.jpg lesz.

- - -

A %n hozzáadása a képeket egymás után megszámozza, kezdve a Beállítások alatt kiválasztott számmal.

-

Ha például a napsütés_%n értéket írja be a Fájlnév formátuma mezőbe, akkor a virág.jpg, ház.jpg és macska.jpg nevű képek új neve napsütés_3, napsütés_1 és napsütés_2 lesz. (A számozás az eredeti fájlnevek ábécérendjében történik.)

- - -
- - diff -Nru eog-3.26.2/help/hu/shortcuts.page eog-3.27.90/help/hu/shortcuts.page --- eog-3.26.2/help/hu/shortcuts.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,162 +0,0 @@ - - - - - - Az összes gyorsbillentyű listája. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Gyorsbillentyűk - -

A képmegjelenítőben használható összes gyorsbillentyű listája a következő:

- -
- Megnyitás, bezárás, mentés és nyomtatás - - - - - - - - - - - - - - - - - - - - - - - - - -

Képfájl megnyitása

CtrlO

A kép mentése ugyanazzal a fájlnévvel

CtrlS

A jelenlegi kép másolatának mentése másik fájlnévvel

ShiftCtrlS

A jelenlegi kép nyomtatása

CtrlP

A jelenlegi ablak bezárása

CtrlW

A kép beállítása az asztal háttereként

CtrlF8

-
- -
- Képek megjelenítése - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Ugrás a mappa előző képére

Backspace / Balra

Ugrás a mappa következő képére

Szóköz / Jobbra

Ugrás a mappa első képére

AltHome

Ugrás a mappa utolsó képére

AltEnd

Véletlen kép választása a mappából

CtrlM

A képgaléria megjelenítése

F9

Teljes képernyő

F11

Diavetítés

F5

Tényleges méret

Ctrl0 (nulla)

Teljes oldal

F

Nagy kép mozgatása az ablakban

AltNyílbillentyűk

-
- -
- Kép másolása másik alkalmazásba való beillesztéshez - - - - - -

Másolás

CtrlC

-
- -
- Nagyítás és forgatás - - - - - - - - - - - - - - - - - -

Nagyítás

+

Kicsinyítés

-

Forgatás az órajárással egyező irányba

CtrlR

Forgatás az órajárással ellentétes irányba

ShiftCtrlR

-
- -
- Egyéb - - - - - - - - - - - - - - - - - -

Oldalsáv megjelenítése

CtrlF9

Képtulajdonságok megjelenítése

AltEnter

Visszavonás

CtrlZ

Súgó

F1

-
- diff -Nru eog-3.26.2/help/hu/slideshow.page eog-3.27.90/help/hu/slideshow.page --- eog-3.26.2/help/hu/slideshow.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - - - Válassza a Diavetítés menüpontot a mappa összes képének megjelenítéséhez diavetítésként. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Diavetítés - -

A mappa összes képének diavetítésként való megjelenítéséhez:

- - - -

Nyissa meg a mappa egyik képét.

- - -

Válassza a Diavetítés menüpontot, vagy nyomja meg az F5 billentyűt.

-

Elindul egy teljes képernyős diavetítés. Néhány másodpercenként egy új kép jelenik meg. Ha gyorsabban szeretne haladni a diavetítésben, vagy vissza szeretne térni egy már megjelenített képhez, akkor használja a Balra és Jobbra nyilakat a vissza- és előrelépkedéshez.

- - -

A diavetítésből való kilépéshez nyomja meg az Esc vagy F5 billentyűt.

- - - -

A diavetítés beállításai, például a képek megjelenítésének ideje megváltoztathatók. További információkért lásd a diavetítés beállításai oldalt.

- - diff -Nru eog-3.26.2/help/hu/translate.page eog-3.27.90/help/hu/translate.page --- eog-3.26.2/help/hu/translate.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Honosítsa a Képmegjelenítőt - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Segítsen a fordításban -

A Képmegjelenítő felhasználói felületét és súgóját egy világszintű önkéntes közösség fordítja. Közreműködését szívesen fogadjuk.

-

Számos nyelv van, amelyhez még szükség van fordításokra.

-

A fordítás elkezdéséhez létre kell hoznia egy fiókot, és csatlakoznia kell a nyelvének megfelelő fordítócsapathoz. Ez lehetővé teszi Önnek az új fordítások feltöltését.

- -

A GNOME fordítókkal IRC-en is cseveghet. A csatornán a világ minden részéről vannak emberek, így előfordulhat, hogy az időzóna-eltérések miatt nem kap azonnal választ.

-

Ennek alternatívájaként megkeresheti a nemzetközi fordítócsapatot levelezőlistán is. A magyar csapat kezdőoldalán megtalálja a magyar levelezőlista címét és a fordítások megkezdéséhez szükséges információkat.

- diff -Nru eog-3.26.2/help/hu/view.page eog-3.27.90/help/hu/view.page --- eog-3.26.2/help/hu/view.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - A képek közti váltáshoz használja a Balra és a Jobbra nyilakat, vagy a képgalériát az összes megjelenítéséhez. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - -Egy mappa minden képének megjelenítése - -

Gyorsan végignézheti egy mappa képeit az egyik megnyitásával, majd a kép melletti Következő és Előző gombok megnyomásával. Megjeleníthet egy képgalériát is, amely a mappa képeinek kis méretű előnézeteit tartalmazza.

- -
- Mappa összes képének tallózása -

Ha egy mappa több képet is tartalmaz, akkor kényelmesen végiglépkedhet azokon anélkül, hogy egyenként kellene mindet megnyitnia.

- - -

Nyissa meg a végignézni kívánt mappa bármely képét.

- - -

Kattintson a kép melletti Következő és Előző gombokra, vagy nyomja meg a Jobbra és Balra nyilakat a képek közti váltáshoz.

-

Ennek alternatívájaként használhatja a Fel és Le nyilakat, vagy a Szóköz és a Backspace billentyűket is.

- - -

A képeket teljes képernyős módban is tallózhatja a címsorban lévő Teljes képernyő gomb megnyomásával, vagy az F11 billentyű megnyomásával. Teljes képernyős módban a billentyűzet segítségével lépkedhet a képek közt.

-

A normál ablakmérethez való visszatéréshez nyomja meg az Esc vagy F11 billentyűt.

- - -
- - - - diff -Nru eog-3.26.2/help/hu/zoom.page eog-3.27.90/help/hu/zoom.page --- eog-3.26.2/help/hu/zoom.page 2017-09-18 14:20:39.000000000 +0000 +++ eog-3.27.90/help/hu/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,48 +0,0 @@ - - - - - - - A kép nagyítása a képernyőn. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Kelemen Gábor - kelemeng at gnome dot hu - 2011, 2012, 2013, 2014, 2017. - - - -Nagyítás - -

A nagyítás vagy kicsinyítés használatával a kép nagyobb vagy kisebb részét jelenítheti meg a képernyőn egyszerre. Ez akkor hasznos, ha egy nagy képet teljes egészében szeretne látni, vagy egy kép finomabb részleteit szeretné megvizsgálni.

- - - -

Az egérgörgő használatával nagyíthatja és kicsinyítheti a képet. Görgessen felfelé a nagyításhoz, vagy lefelé a kicsinyítéshez.

- - -

A címsor gombjaival is nagyíthat és kicsinyíthet. A nagyításhoz kattintson a Kép nagyítása ikonra, a kicsinyítéshez pedig a Kép kicsinyítése ikonra. Ezek „Plusz” és „Mínusz” jelre hasonlítanak.

- - -

Ennek alternatívájaként nyomja meg a Ctrl+ vagy Ctrl- kombinációt.

- - - -

A kép eredeti méretben való megjelenítéséhez válassza a 100% nagyítási szintet a címsorban lévő legördülő menüből. Ennek alternatívájaként használhatja a Ctrl0 vagy 1 gyorsbillentyűket is.

- -
- Illesztés az ablak szélességéhez -

Választhat akkora nagyítási szintet, hogy a kép mindig teljesen kitöltse az ablakot, még ha át is méretezi azt. Válassza a Legjobb illeszkedés menüpontot a címsorban lévő legördülő menüből.

-
- diff -Nru eog-3.26.2/help/it/bug-filing.page eog-3.27.90/help/it/bug-filing.page --- eog-3.26.2/help/it/bug-filing.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/it/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/it/commandline.page eog-3.27.90/help/it/commandline.page --- eog-3.26.2/help/it/commandline.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/it/copy-paste.page eog-3.27.90/help/it/copy-paste.page --- eog-3.26.2/help/it/copy-paste.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/it/default.page eog-3.27.90/help/it/default.page --- eog-3.26.2/help/it/default.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/it/desktop-background.page eog-3.27.90/help/it/desktop-background.page --- eog-3.26.2/help/it/desktop-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/it/develop.page eog-3.27.90/help/it/develop.page --- eog-3.26.2/help/it/develop.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/it/documentation.page eog-3.27.90/help/it/documentation.page --- eog-3.26.2/help/it/documentation.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/it/edit.page eog-3.27.90/help/it/edit.page --- eog-3.26.2/help/it/edit.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/it/flip-rotate.page eog-3.27.90/help/it/flip-rotate.page --- eog-3.26.2/help/it/flip-rotate.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/it/format-change.page eog-3.27.90/help/it/format-change.page --- eog-3.26.2/help/it/format-change.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/it/formats-save.page eog-3.27.90/help/it/formats-save.page --- eog-3.26.2/help/it/formats-save.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/it/formats-view.page eog-3.27.90/help/it/formats-view.page --- eog-3.26.2/help/it/formats-view.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - Animazione

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Icona per Windows

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap dal toolkip PPM

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/it/index.page eog-3.27.90/help/it/index.page --- eog-3.26.2/help/it/index.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/it/introduction.page eog-3.27.90/help/it/introduction.page --- eog-3.26.2/help/it/introduction.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Introduzione - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/it/legal.xml eog-3.27.90/help/it/legal.xml --- eog-3.26.2/help/it/legal.xml 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/it/license.page eog-3.27.90/help/it/license.page --- eog-3.26.2/help/it/license.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/it/open.page eog-3.27.90/help/it/open.page --- eog-3.26.2/help/it/open.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/it/plugin-exif-digital.page eog-3.27.90/help/it/plugin-exif-digital.page --- eog-3.26.2/help/it/plugin-exif-digital.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/it/plugin-fullscreen-background.page eog-3.27.90/help/it/plugin-fullscreen-background.page --- eog-3.26.2/help/it/plugin-fullscreen-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/it/plugin-fullscreen-double-click.page eog-3.27.90/help/it/plugin-fullscreen-double-click.page --- eog-3.26.2/help/it/plugin-fullscreen-double-click.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/it/plugin-picasa.page eog-3.27.90/help/it/plugin-picasa.page --- eog-3.26.2/help/it/plugin-picasa.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/it/plugin-python-console.page eog-3.27.90/help/it/plugin-python-console.page --- eog-3.26.2/help/it/plugin-python-console.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/it/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/it/plugin-send-by-mail.page eog-3.27.90/help/it/plugin-send-by-mail.page --- eog-3.26.2/help/it/plugin-send-by-mail.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/it/plugin-slideshow-shuffle.page eog-3.27.90/help/it/plugin-slideshow-shuffle.page --- eog-3.26.2/help/it/plugin-slideshow-shuffle.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/it/plugins.page eog-3.27.90/help/it/plugins.page --- eog-3.26.2/help/it/plugins.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/it/plugin-zoom-width.page eog-3.27.90/help/it/plugin-zoom-width.page --- eog-3.26.2/help/it/plugin-zoom-width.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/it/preferences.page eog-3.27.90/help/it/preferences.page --- eog-3.26.2/help/it/preferences.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Preferenze -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

Visualizza qualsiasi parte trasparente di un'immagine con un motivo a scacchiera.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/it/print.page eog-3.27.90/help/it/print.page --- eog-3.26.2/help/it/print.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/it/rename-multiple.page eog-3.27.90/help/it/rename-multiple.page --- eog-3.26.2/help/it/rename-multiple.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/it/shortcuts.page eog-3.27.90/help/it/shortcuts.page --- eog-3.26.2/help/it/shortcuts.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/it/slideshow.page eog-3.27.90/help/it/slideshow.page --- eog-3.26.2/help/it/slideshow.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Diapositive - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/it/translate.page eog-3.27.90/help/it/translate.page --- eog-3.26.2/help/it/translate.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/it/view.page eog-3.27.90/help/it/view.page --- eog-3.26.2/help/it/view.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/it/zoom.page eog-3.27.90/help/it/zoom.page --- eog-3.26.2/help/it/zoom.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/it/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/ja/bug-filing.page eog-3.27.90/help/ja/bug-filing.page --- eog-3.26.2/help/ja/bug-filing.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ja/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - 画像ビューアーのバグを報告します。 - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -画像ビューアーに関する問題の報告 -

画像ビューアーは、ボランティアコミュニティにより維持されています。お気軽にご参加ください。

- -

画像ビューアーの問題を経験した場合 (たとえば、クラッシュしたり予期しない挙動をした場合)、あるいは画像ビューアーが備えているべき機能がない場合、 のリンクをクリックしてバグレポートを提出してください。問題を解決するために、ソフトウェア開発者はバグレポートを使って問題を追跡します。

-

参加するには、バグ報告やコメントの書き込みを行うアカウントが必要になります。また、報告したバグの状態についてメールで更新を受信できるように登録する必要があります。まだアカウントを取得していない場合は、New Account というリンクをクリックしてアカウントを作成してください。

-

アカウントを取得すれば、ログインして、File a BugCoreeog をクリックします。バグを報告する前に、bug writing guidelines を一読してください。また、browse をクリックして、同じバグレポートがすでに存在しないか確認してください。

-

バグを報告するには、Component メニューから対応するコンポーネントを選択します。どのコンポーネントを選べばよいかわからない場合は、general を選択してください。

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

バグレポートには、ID ナンバーが付与されます。処理されている間はバグの状態が更新されます。バグ修正には時間が掛かる場合もあります。また、ソフトウェアの開発者は、問題を特定するために、より詳細な情報を求めてくることもあります。

- diff -Nru eog-3.26.2/help/ja/commandline.page eog-3.27.90/help/ja/commandline.page --- eog-3.26.2/help/ja/commandline.page 2017-08-10 20:19:26.000000000 +0000 +++ eog-3.27.90/help/ja/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - Command Line - eog コマンドを使えば、さまざまなモードで複数の画像を開けます。 - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -コマンドライン - -

端末から画像ビューアーを起動するには、eog と入力します。

-

eog コマンドの後にファイル名を入力すれば、指定したファイルを開きます。

-eog image.jpeg -

eog コマンドの後にフォルダー名を入力すれば、指定したフォルダーを開きます。

-eog folder -

フォルダー内のすべての画像を一度に表示するには、画像ギャラリーを閲覧するとよいでしょう。

- -
- 画像をフルスクリーンモードで開く - eog --fullscreen image.jpeg -
- -
- 新しいウィンドウで画像を開く - eog --new-instance image.jpeg -
-
- スライドショーモードでフォルダーを開く - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/ja/copy-paste.page eog-3.27.90/help/ja/copy-paste.page --- eog-3.26.2/help/ja/copy-paste.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - - 画像ビューアーから他のアプリケーションへコピー/貼り付けする方法です。 - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -画像のコピー & ペースト -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

画像はクリップボードにコピーされているので LibreOffice のドキュメントや Gimp の画像、あるいはその他のアプリケーションに貼り付けることができます。

- - diff -Nru eog-3.26.2/help/ja/default.page eog-3.27.90/help/ja/default.page --- eog-3.26.2/help/ja/default.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - 画像ビューアーを画像表示のためのデフォルトのアプリケーションにします。 - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -デフォルトで画像ビューアーに画像を開く -

画像ビューアーを特定の画像ファイル形式を開くデフォルトのプログラムにしたい場合

- - - -

ファイルというアプリケーションで開きたいファイルを右クリックして、プロパティを選択します。

- - -

開き方タブを開きます。推奨されたアプリケーションの一覧が表示されます。

- - -

画像ビューアーを選択してデフォルトに設定するをクリックします。

-

もし、画像ビューアーが推奨されたアプリケーションの一覧になければ、別のアプリケーションを表示するをクリックします。表示された一覧から、画像ビューアーを選択してデフォルトに設定するをクリックします。

- - -

閉じるをクリックします。

- - - -

今後、同じ形式のファイルをダブルクリックした時、画像ビューアーで開かれます。

- - diff -Nru eog-3.26.2/help/ja/desktop-background.page eog-3.27.90/help/ja/desktop-background.page --- eog-3.26.2/help/ja/desktop-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - お気に入りの画像をデスクトップの背景/壁紙に設定します。 - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -現在の画像をデスクトップの背景にする -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

この操作をすると、表示中の画像が背景画像に設定されます。その後、背景設定パネルで背景の外観を調整するかどうかを尋ねるメッセージが表示されます。隠すをクリックするとメッセージは消えます。

- diff -Nru eog-3.26.2/help/ja/develop.page eog-3.27.90/help/ja/develop.page --- eog-3.26.2/help/ja/develop.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - 画像ビューアーを改良します。 - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -開発の協力 -

画像ビューアーは、ボランティアコミュニティにより開発および維持されています。お気軽にご参加ください。

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/ja/documentation.page eog-3.27.90/help/ja/documentation.page --- eog-3.26.2/help/ja/documentation.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - ドキュメンテーションチームに参加する。 - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -ドキュメント作成の援助 - -

画像ビューアーのドキュメントは、ボランティアコミュニティにより維持されています。お気軽にご参加ください。

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/ja/edit.page eog-3.27.90/help/ja/edit.page --- eog-3.26.2/help/ja/edit.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -画像の編集や削除 - -
画像の編集 -

画像ビューアーは画像を閲覧することのみに使用できます。画像の編集はできません。画像を編集するには、GIMP 画像エディターのような画像編集用のアプリケーションを使用してください。画像を編集するために他のアプリケーションで開く手順は、次のとおりです。

- - -

Click Open With, -or right-click on the image.

- - -

使用する画像編集アプリケーションを選択します。

- - -

編集が完了すれば、画像を保存して、編集に使用したアプリケーションを閉じます。

- - -

画像ビューアーは画像が変更されたことを検出し、再読み込みします。

- - -
- -
-画像の削除 -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/ja/flip-rotate.page eog-3.27.90/help/ja/flip-rotate.page --- eog-3.26.2/help/ja/flip-rotate.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - 水平方向/垂直方向へ反転、時計回り/反時計回りに回転を行います。 - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -画像の反転と回転 - -

画像の方向が誤っていたり裏返っている場合、画像を正しく見えるように反転または回転させることができます。

- - -
-画像の反転 - -

編集をクリックします。

 -

水平方向にひっくり返すか垂直方向にひっくり返すのいずれかを選択します。

 - -

If you want to keep the picture flipped in this way, click Save.

-

そうでなければ、画像を保存しないでください。そうすれば、次に画像を開くと元の方向に戻っています。

- - -
- -
-画像の回転 - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

そうでなければ、画像を保存しないでください。そうすれば、次に画像を開くと元の方向に戻っています。

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

時計回りに回転する

CtrlR

反時計回りに回転する

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/ja/format-change.page eog-3.27.90/help/ja/format-change.page --- eog-3.26.2/help/ja/format-change.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,72 +0,0 @@ - - - - - - ある画像形式から他の画像形式へ画像を変換できます。複数の画像に対して一度に変換を行えます。 - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -異なるファイル形式への変換 - -

画像は、JPEG や PNG といった特定のファイル形式で保存されています。ある画像形式を他の画像形式に変換できます。

- -
- 単一の画像を異なるファイル形式に変換する方法は次のとおりです。 - - -

Click Save As…. The -Save Image window will pop up.

- - -

名前欄でファイルの拡張子を変換したいと思う画像形式のものに変更します。ファイルの拡張子は、ファイル名のピリオド (.) より後ろの部分です。

-

JPEG ファイル (.jpg) をビットマップファイル (.bmp) に変換する例

-

元のファイル: image.jpg

-

新しいファイル: image.bmp

- - -

保存をクリックすると新しいファイルが新しい形式で保存されます。古いファイル (古い形式) は削除されずにそのまま残ります。

- - - -

画像ビューアーは、あなたが選択したファイルの拡張子に基づいて画像を保存するファイル形式を推測しようとします。入力したファイル形式が認識されない場合や使用したいファイル形式の拡張子を知らない場合、画像を保存というウィンドウにあるサポートしている画像ファイルをクリックします。するとドロップダウンボックスから、ファイル形式を選択できます。

- -
- -
- 複数の画像を異なるファイル形式に変換する方法は次のとおりです。 -

多くの画像を 1 つのファイル形式から他のファイル形式へ変換できます。これは、変換を必要とする画像がたくさんある場合に便利です。

- - -

画像ギャラリーで Ctrl キーを押したままファイル形式を変換したい画像を選択します。あるいは、CtrlA を押して、すべての画像を選択します。

- - -

Click Save As…. A window - will appear (shown below).

- - - -

デフォルトでは、変換した画像は現在のフォルダーに保存されます。他の場所に保存したい場合は、保存先のフォルダーを変更します。

- - -

ファイル名の書式という入力欄の右にあるドロップダウンリストから、変換したい画像形式を選択します。

- - -

名前を付けて保存をクリックします。

- - -
- - diff -Nru eog-3.26.2/help/ja/formats-save.page eog-3.27.90/help/ja/formats-save.page --- eog-3.26.2/help/ja/formats-save.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG、PNG、BMP およびその他の形式をサポートしています。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - 画像の保存でサポートされている形式 -

画像ビューアーは、次のファイル形式で画像を保存できます。

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

お使いのシステムの設定によっては、他の画像形式を保存できることもあります。

 - diff -Nru eog-3.26.2/help/ja/formats-view.page eog-3.27.90/help/ja/formats-view.page --- eog-3.26.2/help/ja/formats-view.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - - 画像ビューアーでは、PNG や、JPEG、TIFF などさまざまな形式で画像を表示できます。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - サポートしているファイル形式 - -

画像ビューアーでは次の形式で画像を開くことができます。

- -

ANI - アニメーション

 -

BMP - ビットマップ

 -

GIF - Graphics Interchange Format

 -

ICO - Windows のアイコン

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - PPM Toolkit の Portable Anymap

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X のビットマップ

 -

XPM - X のピクセルマップ

 - -

サポートしていない形式の画像を開こうとした場合、'画像のファイル名'という画像を読み込めませんでしたというエラーが表示されます。

- diff -Nru eog-3.26.2/help/ja/index.page eog-3.27.90/help/ja/index.page --- eog-3.26.2/help/ja/index.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Eye of GNOME 画像ビューアーのヘルプ - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME 画像ビューアー - Eye of GNOME 画像ビューアー - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- 画像の表示 -
- -
- 画像の編集 -
- -
- 画像の印刷 -
- -
- 特別な機能の追加 - -
-
- 上級の機能 -
- -
- よくある質問 -
- -
- ヒントとコツ -
- -
- 参加しましょう -
- diff -Nru eog-3.26.2/help/ja/introduction.page eog-3.27.90/help/ja/introduction.page --- eog-3.26.2/help/ja/introduction.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ - - - - - - Eye of GNOME 画像ビューアーへようこそ。 - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -はじめに - -

Eye of GNOME は、画像ビューアーの一種です。Eye of GNOMEを使えば、ほとんどの形式の画像を閲覧できます。大量の画像コレクションを操作でき、スライドショーを表示できます。画像の回転や反転あるいは他のファイル形式への画像の変換といった基本的な変更を加えることもできます。

- - diff -Nru eog-3.26.2/help/ja/legal.xml eog-3.27.90/help/ja/legal.xml --- eog-3.26.2/help/ja/legal.xml 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

This work is licensed under a Creative Commons Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, modify, and distribute the example code contained in this document under the terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/ja/license.page eog-3.27.90/help/ja/license.page --- eog-3.26.2/help/ja/license.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - - 法的情報 - - - ライセンス -

This work is distributed under a CreativeCommons Attribution-Share Alike 3.0 Unported license.

-

You are free:

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

Under the following conditions:

- - - <em>Attribution</em> -

You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).

- - - <em>Share Alike</em> -

If you alter, transform, or build upon this work, you may distribute the resulting work only under the same, similar or a compatible license.

- - -

For the full text of the license, see the CreativeCommons website, or read the full Commons Deed.

- diff -Nru eog-3.26.2/help/ja/open.page eog-3.27.90/help/ja/open.page --- eog-3.26.2/help/ja/open.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - 新しいウィンドウに画像を開きます。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -画像を開く - -

ファイルというファイルブラウザーで画像をダブルクリックすると画像ビューアーで自動的に画像が開かれるはずです。もし、そうでなければ、この画像ビューアーを画像を表示するためのデフォルトのアプリケーションにする必要があるでしょう。

- -

デフォルトでは、ダブルクリックしたそれぞれの画像は、新しい画像ビューアーのウィンドウで開きます。しかし、お望みなら一つのウィンドウで複数の画像を表示できます。

- -

また、画像ビューアー自体から画像を開くこともできます。

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

開きたい画像を選択し、開くをクリックします。

 - - - diff -Nru eog-3.26.2/help/ja/plugin-exif-digital.page eog-3.27.90/help/ja/plugin-exif-digital.page --- eog-3.26.2/help/ja/plugin-exif-digital.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,85 +0,0 @@ - - - - - - カメラの設定、ヒストグラム、地理的位置および日付といった情報を表示します。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -写真について詳細な情報を表示する - -

デジタルカメラで撮影された写真には、デジタルカメラの拡張情報が埋め込みで保存されています。たとえば、撮影された日、そのカメラで使われている露出の設定、場合によっては、どこで撮影された写真かといった情報です。

- -

このトピックでは、どのようにこの情報にアクセスするかについて示します。

- -
-撮影日をステータスバーに表示する - -

ウィンドウの最下部にあるステータスバーに写真の撮影日を表示できます。

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Exif データの詳細を表示する -

デジタルカメラで撮影した写真に保存されている詳細な情報は、Exif データと呼ばれています。画像ビューアーにプラグインをインストールすることにより、Exif データを表示できます。

- - - -

この機能を有効にするためには、eog-plugins がインストールされている必要があります。

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

写真撮影に使われたカメラの設定は、ステータスバーにも表示できます。プラグインタブのExif データ表示を選択して設定をクリックし、ステータスバーにカメラの設定を表示するをチェックします。

- - -
- -
- 写真の撮影場所を表示する -

カメラによっては、デジタル写真に位置情報 (ジオタグ) を添付できます。通常、ジオタグは写真が撮影された場所の GPS 座標 (緯度と経度) です。

- - - -

この機能を有効にするためには、eog-plugins がインストールされている必要があります。

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

地図に写真の撮影場所が表示されるのは、写真に位置情報が添付されている場合のみです。多くのカメラは、写真に位置情報を添付しません。

-
- - - diff -Nru eog-3.26.2/help/ja/plugin-fullscreen-background.page eog-3.27.90/help/ja/plugin-fullscreen-background.page --- eog-3.26.2/help/ja/plugin-fullscreen-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - フルスクリーンモードでの背景色変更を有効にする。 - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -フルスクリーン時の背景色の変更 - -

お好みであれば、フルスクリーンモードでの背景色を変更できます。

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

これでフルスクリモードでは、背景色が選択した色になります。

- -

この機能を有効にするためには、eog-plugins がインストールされている必要があります。

- - diff -Nru eog-3.26.2/help/ja/plugin-fullscreen-double-click.page eog-3.27.90/help/ja/plugin-fullscreen-double-click.page --- eog-3.26.2/help/ja/plugin-fullscreen-double-click.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - 画像をダブルクリックすることでフルスクリーンモードを有効にします。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -ダブルクリックでフルスクリーンにする - - - -

お好みであれば、画像ビューアーで画像をダブルクリックした時に画像をフルスクリーンで表示するようにできます。

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

すると画像をダブルクリックすることにより、フルスクリーンモードと通常 (ウィンドウ) モードが切り替わります。

- - diff -Nru eog-3.26.2/help/ja/plugin-picasa.page eog-3.27.90/help/ja/plugin-picasa.page --- eog-3.26.2/help/ja/plugin-picasa.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - 簡単に画像ビューアーから直接 PicasaWeb へ画像をアップロードします。 - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -<app>PicasaWeb</app> へ写真をアップロードする - -

PicasaWeb は、人々とオンラインで写真を共有するフォトアルバムサービスです。PicasaWeb へ写真をアップロードする簡単な方法を提供するショートカットボタンを追加できます。

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

この機能を有効にするためには、eog-plugins がインストールされている必要があります。

- - diff -Nru eog-3.26.2/help/ja/plugin-python-console.page eog-3.27.90/help/ja/plugin-python-console.page --- eog-3.26.2/help/ja/plugin-python-console.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - Python 端末を使えば、拡張機能を追加したり、画像ビューアー内でスクリプトを実行できます。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python 端末 - -

画像ビューアーは、Python スクリプト言語を利用したプラグインシステムを備えています。Python 端末を有効にすれば、画像ビューアー内から Python インタープリターへ直接アクセスできます。たとえば、スクリプトを記述したり、プログラムによって画像を操作できます。

- - - -

この機能を有効にするためには、eog-plugins がインストールされている必要があります。

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Python 端末にチェックをいれて閉じるをクリックします。

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/ja/plugin-send-by-mail.page eog-3.27.90/help/ja/plugin-send-by-mail.page --- eog-3.26.2/help/ja/plugin-send-by-mail.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - 簡単に新規メールへ画像を添付して送信します。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -メールで画像を送信する - -

メールで人々へ画像を送信する簡単な方法を提供するボタンを追加できます。

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

この機能を有効にするためには、eog-plugins がインストールされている必要があります。

- - -

これを機能させるには、メールアカウントに接続できるように Evolution メールが設定されている必要があります。

- - - - - diff -Nru eog-3.26.2/help/ja/plugin-slideshow-shuffle.page eog-3.27.90/help/ja/plugin-slideshow-shuffle.page --- eog-3.26.2/help/ja/plugin-slideshow-shuffle.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - - スライドショーを再生する時にランダムな順番で画像を表示します。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -スライドショーシャッフル - -

スライドショーを開始した時、画像をランダムな順番で表示するようにできます。

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

この機能を有効にするためには、eog-plugins がインストールされている必要があります。

- - diff -Nru eog-3.26.2/help/ja/plugins.page eog-3.27.90/help/ja/plugins.page --- eog-3.26.2/help/ja/plugins.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,76 +0,0 @@ - - - - - - 拡張機能へアクセスするプラグインをインストールします。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -プラグイン - -

画像ビューアーの拡張プラグインを得るために eog-plugins パッケージをインストールできます。プラグインは以下に列挙するような付加機能を追加します。

- - -

お使いの Linux ディストリビューションのパッケージマネージャーを利用して eog-plugins パッケージをインストールできます。

- - - -

eog-plugins をインストール

- - - - -

eog-plugins には、次の機能が含まれています。

- - - -

日付の表示: ウィンドウのステータスバーに画像の日付を表示します。

- - -

Exif データの表示: カメラの設定とデジタル写真のヒストグラムを表示できます。

- - -

フルスクリーンの背景色: フルスクリーンモードでの背景色を変更可能にします。

- - -

ダブルクリックでフルスクリーンにする: ダブルクリックでフルスクリーンモードに変更できます。

- - -

マップ: 画像に含まれた情報から地理的位置をマップに表示します。

- - -

PicasaWeb アップローダー: PicasaWeb へ写真をアップロードします。

- - -

Python 端末: 画像ビューアー専用の Python スクリプト用端末です。

- - -

メールで送信: 新規メールに画像を添付して友達に送信します。

- - -

スライドショーシャッフル: スライドショーモードで画像の並びをシャッフルします。

- - -

画像の幅にズームを合わせる: 画像の最大幅がウィンドウに合うようにズームを調整します。

- - - - -

設定ウィンドウのプラグインタブを利用してプラグインを管理できます。

- - - diff -Nru eog-3.26.2/help/ja/plugin-zoom-width.page eog-3.27.90/help/ja/plugin-zoom-width.page --- eog-3.26.2/help/ja/plugin-zoom-width.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - 写真の最大幅をウィンドウに合わせるようにズームを調整します。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -画像の幅にズームを合わせる - -

画像をウィンドウの最大幅を満たすように拡げたい場合は、画像の幅にズームを合わせる というプラグインを有効にします。

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

この機能を追加するためには、eog-plugins がインストールされている必要があります。

- - diff -Nru eog-3.26.2/help/ja/preferences.page eog-3.27.90/help/ja/preferences.page --- eog-3.26.2/help/ja/preferences.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,87 +0,0 @@ - - - - - - 画像の表示, スライドショーおよびプラグインに関する設定方法です。 - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -設定 -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-画像の表示に関する設定 - - - - 画像の強調 -

画像を拡大および縮小した時にイメージスムージングを有効にするには、縮小 (拡大) 時に画像を滑らかにするを選択します。これは、低解像度 (ピクセレートされた) 画像をギザギザの縁を滑らかにすることで、よりよく見せます。

-

自動的に向きを調整するを有効にすれば、写真のExif メタデータに従って自動的に写真が回転します。Exif メタデータはデジタルカメラによって自動的に挿入される写真に関する情報であり、写真撮影時のカメラの設定の詳細を含めることができます。たとえば、自動的に向きを調整するが有効になっていると肖像写真は自動的に直立します。この回転は、回転された画像を保存するまで保存されません。

-

自動方向修正は、すべての写真で機能するわけではありません。Exif 方向データを保存するカメラを利用して撮影された写真のみ回転されます。

- - - 透過する部分 -

画像に透過する部分がある場合、その部分の表示方法を次のオプションから 1 つ選択します。

- - -

格子縞にする:

-

画像の透過する部分を格子縞で表示します。

- - -

選択色:

-

画像の透過する部分を色選択ボタンをクリックして指定した一色で表示します。

- - -

背景と同じ:

-

背景の下にある選択色がチェックされている場合、画像の透過する部分を背景色で表示します。そうでなければ、デフォルトの背景色が使われます。

- - - - -
- - -
-スライドショーの設定 - -

スライドショーの設定をカスタマイズする方法は次のとおりです。

- - -

画像の拡大・縮小の下にある設定を選択すると画面より小さい画像を画面いっぱいに広げることができます。

- - -

シーケンスの下にある設定で次の画像を表示するまで画像を (1から100の間で) 何秒間表示するかを選択できます。

- - -

スライドショーを継続的に繰り返したい場合、繰り返すにチェックをいれます。チェックをいれていない場合、スライドショーは選択した画像から開始され、フォルダー内の最後の画像で終了します。

- - -
- - -
-プラグインの設定 - - - - -

ここで有効または無効にしたい追加機能をチェックしたり外したりできます。左の画像は、デフォルトで利用可能なプラグインを表示しています。

- -

いくつかの拡張機能を提供するプラグインを含んだ eog-plugins パッケージをインストールするとよいでしょう。これをインストールすると右の画像で表示されているような追加プラグインを有効にできます。

-
- - diff -Nru eog-3.26.2/help/ja/print.page eog-3.27.90/help/ja/print.page --- eog-3.26.2/help/ja/print.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ja/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -画像の印刷 - -

閲覧中の画像を印刷する方法は次のとおりです。

- - - -

Click Print….

- - -

全般タブで利用したいプリンターと印刷したいコピーの数を選択します。

- - -

画像の設定タブを開けぱ、画像の位置とサイズを調整できます。

-

ページ上での画像の位置は、プレビュー内で画像をドラッグすることによっても調整可能です。

- - -

高品質写真紙を利用する場合、ページの設定タブを開き、正しい用紙の種類を選択します。画像の品質タブも開き、高品質の設定を選択する必要があります。そうすれば、可能な限り最高品質で写真を印刷できます。

- - -

印刷をクリックします。

- - - -

上に挙げたタブのうちのいくつかは、プリンターモデルによっては表示されないことに注意してください。これは、それらのプリンターのプリンタードライバーが、そのような設定を変更することを許可していないためです。たとえば、画像の品質タブが見つからなければ、利用しようとしているプリンタードライバーがこれらの設定をサポートしていないことを意味します。

- - diff -Nru eog-3.26.2/help/ja/rename-multiple.page eog-3.27.90/help/ja/rename-multiple.page --- eog-3.26.2/help/ja/rename-multiple.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ja/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - - 画像の一群に対し自動的にファイル名を変更し番号を付けます。 - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -たくさんの画像のファイル名を一度に変更する - -

名前を変更したい画像がたくさんある場合、標準的な番号付けられた書式の名前にするとよいでしょう。

- - - -

F9 キーを押して画像ギャラリーを開きます。

- - -

画像ギャラリーから名前を変更したい画像すべてを Ctrl キーを押したままクリックして選択します。

-

あるいは、すべての画像を選択するには CtrlA を押します。

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

デフォルトでは、名前を変更した画像は現在のフォルダーに保存されます。他の場所に保存するには、保存先のフォルダーを変更します。

- - -

ファイル名の書式という欄を利用して画像の名付け形式を選択します。ファイル名のプレビューに新しいファイル名がどのように見えるか表示されます。ファイル名の変更方法を決めるにあたっては、下記の という節を参照してください。

- - -

異なるファイル形式への画像の変換をしたくない場合は、ファイル形式のドロップダウンリストが変更しないになっていることを確かめます。

- - -

名前を付けて保存をクリックすると画像の名前が変更されます。

- - - - - -
- ファイル名の書式の選択 -

名前を変更するファイルの名前は、ファイル名の書式という欄によって決定されます。

- - -

この欄に %f を残すことにより、新しいファイル名の一部に元のファイル名を保持させることができます。

-

たとえば、ファイル名の書式という欄に paris_%f と入力すると flower.jpg、 house.jpg および cat.jpg という画像は、paris_flower.jpg、paris_house.jpg および paris_cat.jpg という名前に変更されます。

- - -

%n を付加するとオプションの下にある欄で選択した番号から始まる連続的な番号が画像に振られます。

-

たとえば、ファイル名の書式という欄に sunshine_%n と入力すると flower.jpg、 house.jpg および cat.jpg という画像は、sunshine_2.jpg、sunshine_3.jpg および sunshine_1.jpg という名前に変更されます。(元のファイル名のアルファベット順に番号が振られます。)

- - -
- - diff -Nru eog-3.26.2/help/ja/shortcuts.page eog-3.27.90/help/ja/shortcuts.page --- eog-3.26.2/help/ja/shortcuts.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ja/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,156 +0,0 @@ - - - - - - すべてのキーボードショートカットの一覧です。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -キーボードショートカット - -

以下は、画像ビューアーで利用できるすべてのキーボードショートカットの一覧です。

- -
- 開く、閉じる、保存および印刷 - - - - - - - - - - - - - - - - - - - - - - - - - -

画像ファイルを開く

CtrlO

同じファイル名で画像を保存する

CtrlS

新しいファイル名で現在の画像の複製を保存する

ShiftCtrlS

現在の画像を印刷する

CtrlP

現在のウィンドウを閉じる

CtrlW

画像をデスクトップの背景に設定する

CtrlF8

-
- -
- 画像の表示 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

フォルダー内の前の画像に移動する

Back space / ←

フォルダー内の次の画像へ移動する

スペースバー / →

フォルダー内の最初の画像へ移動する

AltHome

フォルダー内の最後の画像へ移動する

AltEnd

フォルダー内のランダムな画像を選択する

CtrlM

画像ギャラリーを表示する

F9

フルスクリーンで表示する

F11

スライドショーを表示する

F5

実際の大きさ

Ctrl0 (ゼロ)

ウィンドウに合わせる

F

大きな画像を上下左右にスクロールする

Alt矢印キー

-
- -
- 他のアプリケーションへ画像をコピーする - - - - - -

コピー

CtrlC

-
- -
- 拡大・縮小と回転 - - - - - - - - - - - - - - - - - -

拡大

+

縮小

-

時計回りに回転する

CtrlR

反時計回りに回転する

ShiftCtrlR

-
- -
- その他 - - - - - - - - - - - - - - - - - -

サイドペインを表示する

CtrlF9

画像のプロパティを表示する

AltReturn

元に戻す

CtrlZ

ヘルプ

F1

-
- diff -Nru eog-3.26.2/help/ja/slideshow.page eog-3.27.90/help/ja/slideshow.page --- eog-3.26.2/help/ja/slideshow.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ja/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -スライドショー - -

フォルダー内のすべての画像をスライドショーで表示する方法は次のとおりです。

- - - -

目的のフォルダーから画像を 1 つ開きます

- - -

Click Slideshow or press - F5.

-

フルスクリーンでスライドショーが始まります。数秒おきに新しい画像が表示されます。より早くスライドショーを進めたり、すでに表示された画像に戻したい場合、←や→の矢印キーを利用すると手動で戻したり進めたりできます。

- - -

スライドショーを終了するには、Esc キーか F5 キーを押します。

- - - -

各画像の表示時間など、スライドショーの設定を変更できます。詳細は、スライドショーの設定をご覧ください。

- - diff -Nru eog-3.26.2/help/ja/translate.page eog-3.27.90/help/ja/translate.page --- eog-3.26.2/help/ja/translate.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ja/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - - 画像ビューアーをローカライズします。 - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -翻訳の協力 -

画像ビューアーのユーザーインターフェースとドキュメントは、世界中のボランティアコミュニティによって翻訳されています。お気軽にご参加ください。

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

IRC を使って、GNOME の翻訳者たちとチャットできます。チャンネル上の人々は世界各地に住んでいます。したがって、タイムゾーンの違いにより、ただちに返事を得られないこともあります。

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/ja/view.page eog-3.27.90/help/ja/view.page --- eog-3.26.2/help/ja/view.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ja/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ - - - - - - カーソルキーの ← または → を押すと画像を瞬時に切り替えることができます。また、画像ギャラリーを使えば、すべての画像が表示されます。 - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -フォルダー内のすべての画像を表示 - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- フォルダー内のすべての画像を一通り閲覧する -

さまざまな画像が含まれているフォルダーがあれば、個別に開くことなくすべての画像を一通り閲覧できます。

- - -

一通り閲覧したいフォルダーから、いずれかの画像を開きます。

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

通常の表示に戻るには、Esc か F11 を押します。

- - -
- - - - diff -Nru eog-3.26.2/help/ja/zoom.page eog-3.27.90/help/ja/zoom.page --- eog-3.26.2/help/ja/zoom.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ja/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -拡大・縮小 - -

画像を画面に表示しながら、その場で拡大したり縮小したりできます。これは、大きな画像の全体を見たい場合や画像の細部を詳しく調べたい場合に便利です。

- - - -

マウスのホイールを利用して拡大・縮小を行えます。上に回転させると拡大し、下に回転させると縮小します。

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- ウィンドウに合わせて縮小する方法は次のとおりです。 -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/ko/bug-filing.page eog-3.27.90/help/ko/bug-filing.page --- eog-3.26.2/help/ko/bug-filing.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - 이미지 보기에 버그 리포트하기. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -이미지 보기의 문제점 리포트하기 -

이미지 보기는 자발적인 커뮤니티가 관리합니다. 여러분도 참여할 수 있습니다.

- -

이미지 보기에서 문제를 발견하면(예를 들어, 프로그램이 비정상 종료하거나 예상하지 못하는 동작을 하면), 또는 필요하다고 생각하는 기능이 빠져 있다면, 링크를 눌러 버그를 리포트하십시오. 버그 리포트가 있어야 개발자가 문제점을 추적할 수 있고 수정할 수 있습니다.

-

참여하려면 버그 리포트와 답글 달기에 사용하는 계정이 필요합니다. 또 계정을 등록해야 버그 상태 업데이트를 전자메일로 받을 수 있습니다. 계정이 아직 없으면 New Account 링크를 눌러 새로 만드십시오.

-

계정이 있으면 로그인해서 File a BugCoreeog를 누르십시오. 버그를 리포트하기 전에 버그 작성 안내서를 읽어 보십시오. 또 버그가 이미 리포트되었는지 살펴보십시오.

-

버그를 리포트하려면 Component 메뉴에서 컴포넌트를 선택하십시오. 무슨 컴포넌트인지 잘 모르겠으면 general을 선택하십시오.

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

리포트마다 ID 번호가 주어집니다. 그리고 버그를 처리할 때마다 그 상태가 바뀝니다. 버그를 바로잡으려면 오래 걸릴 수도 있고, 소프트웨어 개발자가 문제점을 파악하는데 필요한 정보를 더 요청할 수도 있습니다.

- diff -Nru eog-3.26.2/help/ko/commandline.page eog-3.27.90/help/ko/commandline.page --- eog-3.26.2/help/ko/commandline.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - 명령 행 - eog 명령으로 여러가지 모드로 이미지 한 개 또는 여러 개를 열 수 있습니다. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -명령 행 - -

터미널에서 이미지 보기를 실행하려면, eog 명령을 실행하십시오.

-

특정 파일을 열라고 지정하려면 eog 명령 다음에 파일 이름을 입력하십시오:

-eog image.jpeg -

특정 폴더를 열라고 지정하려면 eog 명령 다음에 폴더 이름을 입력하십시오:

-eog folder -

폴더에 들어 있는 모든 사진을 보려면, 이미지 모음을 보십시오.

- -
- 전체화면 모드에서 이미지 열기 - eog --fullscreen image.jpeg -
- -
- 새 인스턴스에서 이미지 열기 - eog --new-instance image.jpeg -
-
- 슬라이드 쇼 모드에서 폴더 열기 - eog --slide-show 사진/ -
- diff -Nru eog-3.26.2/help/ko/copy-paste.page eog-3.27.90/help/ko/copy-paste.page --- eog-3.26.2/help/ko/copy-paste.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - - - 이미지 보기에서 다른 프로그램으로 복사하고 붙여넣는 방법. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -사진 복사하고 붙여넣기 -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

그러면 사진이 클립보드로 복사되고, LibreOffice 문서, 김프 이미지, 기타 프로그램에 붙여 넣을 수 있습니다.

- - diff -Nru eog-3.26.2/help/ko/default.page eog-3.27.90/help/ko/default.page --- eog-3.26.2/help/ko/default.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - 이미지 보기를 사진을 볼 때 기본 프로그램으로 설정하기. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -사진을 기본값으로 이미지 보기에서 열기 -

특정 이미지 파일 형식을 열 때 사용할 기본 프로그램을 이미지 보기 프로그램으로 바꾸려면:

- - - -

파일 프로그램에서 파일에 마우스 오른쪽 단추를 눌러 속성을 선택하십시오.

- - -

열 프로그램 탭으로 가십시오. 추천 프로그램 목록이 나타납니다.

- - -

이미지 보기를 선택해 기본값으로 설정을 누르십시오.

-

이미지 보기가 추천 프로그램 목록에 없으면, 다른 프로그램 보기를 누르십시오. 이미지 보기를 선택하고 기본값으로 설정을 누르십시오.

- - -

닫기를 누르십시오.

- - - -

다음부터는 같은 형식의 파일에 단추를 두 번 누를 때마다, 이미지 보기를 열게 됩니다.

- - diff -Nru eog-3.26.2/help/ko/desktop-background.page eog-3.27.90/help/ko/desktop-background.page --- eog-3.26.2/help/ko/desktop-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - 원하는 사진을 바탕 화면 배경/월페이퍼로 설정합니다. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -현재 사진을 바탕 화면 배경으로 사용하기 -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

이렇게 하면 배경을 즉시 보고 있는 이미지로 바꿉니다. 그러면 배경 기본 설정 대화 창이 나타나서 여기에서 사진 모양을 바꿀 수 있습니다. 감추기를 누르면 메시지가 사라집니다.

- diff -Nru eog-3.26.2/help/ko/develop.page eog-3.27.90/help/ko/develop.page --- eog-3.26.2/help/ko/develop.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - 이미지 보기 개선하기 - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -개발 돕기 -

이미지 보기는 자발적인 커뮤니티가 개발하고 관리합니다. 여러분도 참여할 수 있습니다.

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/ko/documentation.page eog-3.27.90/help/ko/documentation.page --- eog-3.26.2/help/ko/documentation.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - 문서 팀에 참여하기. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -문서 작성 돕기 - -

이미지 보기 문서는 자발적인 커뮤니티가 관리합니다. 여러분도 참여할 수 있습니다.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/ko/edit.page eog-3.27.90/help/ko/edit.page --- eog-3.26.2/help/ko/edit.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - -사진 편집 또는 삭제하기 - -
사진 편집하기 -

이미지 보기는 사진을 보는 목적으로만 사용할 수 있고, 편집할 수는 없습니다. 편집 목적으로는 김프와 같은 사진 편집 프로그램을 사용해야 합니다. 다른 프로그램에서 사진을 열어서 편집하려면:

- - -

Click Open With, -or right-click on the image.

- - -

사진을 편집할 때 사용할 프로그램을 선택하십시오.

- - -

편집을 마치면, 이미지를 저장하고 그 프로그램을 닫으십시오.

- - -

사진이 바뀌면 그림 보기에서 자동으로 알아내서 다시 읽어들입니다.

- - -
- -
-사진 삭제하기 -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/ko/flip-rotate.page eog-3.27.90/help/ko/flip-rotate.page --- eog-3.26.2/help/ko/flip-rotate.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - 가로/세로, 시계 방향/시계 반대 방향 - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -사진 뒤집기 또는 회전 - -

사진 방향이 잘못됐거나 뒤집혀 있는 경우, 사진을 뒤집거나 회전해서 바로잡을 수 있습니다.

- - -
-사진 뒤집기 - -

편집을 누르십시오.

 -

가로 방향으로 뒤집기 또는 세로 방향으로 뒤집기를 선택하십시오.

 - -

If you want to keep the picture flipped in this way, click Save.

-

사진을 저장하지 않으면, 다음 번에 열 때 원래 방향으로 되돌아갑니다.

- - -
- -
-사진 회전하기 - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

사진을 저장하지 않으면, 다음 번에 열 때 원래 방향으로 되돌아갑니다.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

시계 방향 회전

CtrlR

시계 반대 방향 회전

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/ko/format-change.page eog-3.27.90/help/ko/format-change.page --- eog-3.26.2/help/ko/format-change.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - 사진을 한 이미지 형식에서 다른 형식으로 변환할 수 있습니다. 여러 개의 사진을 한 번에 할 수도 있습니다. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -다른 파일 형식으로 변환하기 - -

사진은 JPEG이나 PNG같은 어떤 특정 파일 형식으로 저장됩니다. 이러한 파일을 다른 형식으로 변환할 수 있습니다.

- -
- 사진 하나를 다른 파일 형식으로 변환하기 - - -

Click Save As…. The -Save Image window will pop up.

- - -

이름 항목에서 변환하려는 파일 형식의 파일 확장자를 바꾸십시오. 파일 확장자는 파일 이름에서 점 뒤의 부분을 말합니다.

-

예를 들어 JPEG(.jpg) 파일을 비트맵(.bmp) 파일로 변환하려면:

-

원본 파일: image.jpg

-

새 파일: image.bmp

- - -

저장을 누르면, 새 파일을 새 형식으로 저장합니다. 예전 파일은 예전 형식으로 그대로 남아 있고, 삭제되지 않습니다.

- - - -

이미지 보기에서 파일 확장자에 따라 어떤 파일 형식으로 저장할지 자동으로 알아냅니다. 입력한 파일 확장자에 해당하는 형식을 알아낼 수 없거나, 아니면 어떤 파일 확장자를 입력할지 모르겠으면, 이미지 저장 창에서 지원하는 이미지 파일을 누르십시오. 여기서 드롭다운 박스에서 파일 형식을 선택할 수 있습니다.

- -
- -
- 여러 사진을 다른 파일 형식으로 변환하기 -

여러 개의 사진을 한 형식에서 다른 형식으로 한 번에 변환할 수 있습니다. 변환하려는 사진이 여러 개 있을 때 사용합니다.

- - -

Ctrl 키를 누르고 이미지 모음에서 변환하려는 이미지를 누르십시오. 아니면 CtrlA 키를 눌러 모든 이미지를 선택하십시오.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

변환한 사진은 기본값으로 현재 폴더에 저장됩니다. 다른 위치에 저장하려면, 대상 폴더를 바꾸십시오.

- - -

사진을 변환하려는 대상 파일 포맷을 파일 이름 형식 상자의 오른쪽 드롭다운 메뉴에서 선택하십시오.

- - -

저장을 누르십시오.

- - -
- - diff -Nru eog-3.26.2/help/ko/formats-save.page eog-3.27.90/help/ko/formats-save.page --- eog-3.26.2/help/ko/formats-save.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - JPEG, PNG, BMP 등. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - - 사진 저장을 지원하는 형식 -

이미지 보기에서는 다음 파일 형식으로 사진을 저장할 수 있습니다:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

시스템 설정에 따라 기타 이미지 파일 형식으로 저장할 수도 있습니다.

 - diff -Nru eog-3.26.2/help/ko/formats-view.page eog-3.27.90/help/ko/formats-view.page --- eog-3.26.2/help/ko/formats-view.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - - 이미지 보기에서는 PNG, JPEG, TIFF 등 다양한 이미지 형식으로 된 사진을 표시할 수 있습니다. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - - 지원하는 이미지 형식 - -

이미지 보기에서는 다음 형식으로 사진을 열 수 있습니다:

- -

ANI - 애니메이션

 -

BMP - 비트맵

 -

GIF - 그래픽 교환 형식(Graphics Interchange Format)

 -

ICO - 윈도우 아이콘

 -

JPEG/JPG - 사진 그래픽 전문가 연합 그룹(Joint Photographic Experts Group)

 -

PCX - PC 페인트브러쉬

 -

PNG - 이동식 네트워크 그래픽(Portable Network Graphics)

 -

PNM - PPM 툴킷의 호환 형식(Portable Anymap)

 -

RAS - Sun 래스터

 -

SVG - 크기 조정 가능한 벡터 그래픽(Scalable Vector Graphics)

 -

TGA - 타가(Targa)

 -

TIFF - 태그 이미지 파일 형식(Tagged Image File Format)

 -

WBMP - 무선 통신 비트맵(Wireless Bitmap)

 -

XBM - X 비트맵

 -

XPM - X 픽스맵

 - -

지원하지 않는 형식의 사진을 열려면, '이미지 파일 이름' 이미지를 읽어들일 수 없습니다. 오류가 표시됩니다.

- diff -Nru eog-3.26.2/help/ko/index.page eog-3.27.90/help/ko/index.page --- eog-3.26.2/help/ko/index.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - 그놈의 눈 이미지 보기 도움말. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - 그놈의 눈 이미지 보기 - 그놈의 눈 이미지 보기 - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> 그놈의 눈 이미지 보기 -
- 사진 보기 -
- -
- 사진 편집하기 -
- -
- 사진 인쇄하기 -
- -
- 추가 기능 - -
-
- 고급 -
- -
- 자주 묻는 질문 -
- -
- 힌트 -
- -
- 개발 참여하기 -
- diff -Nru eog-3.26.2/help/ko/introduction.page eog-3.27.90/help/ko/introduction.page --- eog-3.26.2/help/ko/introduction.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - 그놈의 눈 이미지 보기 프로그램입니다. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -소개 - -

그놈의 눈은 이미지 보기 프로그램입니다. 이 프로그램으로 거의 모든 종류의 사진을 볼 수 있습니다. 사진 여러 장의 모음을 처리할 수도 있고, 슬라이드 쇼를 표시할 수도 있습니다. 사진에 회전이나 뒤집기와 같은 기초적인 조작을 할 수 있고, 다른 파일 형식으로 변환할 수도 있습니다.

- - diff -Nru eog-3.26.2/help/ko/legal.xml eog-3.27.90/help/ko/legal.xml --- eog-3.26.2/help/ko/legal.xml 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

이 문서는 Creative Commons Attribution-Share Alike 3.0 United States License 라이선스로 배포됩니다.

-

예외적으로, 이 문서에 들어 있는 예제 코드는 어떤 조건이든 제한 없이 복사, 수정, 배포할 수 있도록 저작권자가 특별히 허용합니다.

- diff -Nru eog-3.26.2/help/ko/license.page eog-3.27.90/help/ko/license.page --- eog-3.26.2/help/ko/license.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - - 법적 정보. - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - - 라이선스 -

이 문서는 CreativeCommons Attribution-Share Alike 3.0 Unported 라이선스로 배포됩니다.

-

이용자는 다음 권리가 있습니다:

- - - <em>공유</em> -

작업을 복제, 배포, 전송.

- - - <em>변경</em> -

작업을 맞게 각색.

- - -

다음 조건을 따라야 합니다:

- - - <em>저작자 표시</em> -

저작자 또는 저작권자가 지정한 방법으로 표시해야 합니다. 하지만 저작자나 저작권자가 귀하에게 권리를 부여한다거나 귀하의 사용을 허가한다는 내용을 나타내서는 안 됩니다.

- - - <em>동일 조건</em> -

이 작업을 바꾸거나, 변환하거나, 파생물을 만들면, 그 결과물은 동일하거나 호환되는 라이선스로만 배포할 수 있습니다.

- - -

전체 라이선스 전문을 보려면 CreativeCommons 홈페이지를 보거나, 전체 Commons Deed를 보십시오.

- diff -Nru eog-3.26.2/help/ko/open.page eog-3.27.90/help/ko/open.page --- eog-3.26.2/help/ko/open.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,39 +0,0 @@ - - - - - - 새 창에서 사진 열기. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - - -사진 열기 - -

파일 보기 창에서 사진을 두 번 누르면 이미지 보기 프로그램을 엽니다. 그렇지 않은 경우, 이미지 보기를 기본 프로그램으로 만들면 됩니다.

- -

사진을 두 번 누르면 기본값으로는 사진 하나마다 이미지 보기 창을 엽니다. 선택에 따라 이미지 여러 개를 한 창에 볼 수도 있습니다.

- -

이미지 보기 창에서 직접 사진을 열 수도 있습니다:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

열려는 사진을 선택해 열기를 누르십시오.

 - - - diff -Nru eog-3.26.2/help/ko/plugin-exif-digital.page eog-3.27.90/help/ko/plugin-exif-digital.page --- eog-3.26.2/help/ko/plugin-exif-digital.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,91 +0,0 @@ - - - - - - 카메라 설정, 히스토그램, 위치 정보, 시각 등의 정보를 봅니다. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -사진에서 자세한 정보 보기 - -

디지털 카메라에서 찍은 사진에는 여러가지 추가 정보가 들어 있습니다. 사진을 찍은 시각, 카메라에 사용한 노출 설정, 어떤 경우에는 사진을 찍은 위치도 들어 있습니다.

- -

여기서는 어떻게 이러한 정보를 볼 수 있는지 설명합니다.

- -
-상태 표시줄에 시각 표시 - -

창의 맨 아래에 있는 상태 표시줄에 사진을 찍은 시각을 표시할 수 있습니다.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- 자세한 EXIF 데이터 -

디지털 사진에 저장된 자세한 정보를 EXIF 데이터라고 합니다. 이미지 보기에 플러그인을 설치하면 이 정보를 볼 수 있습니다.

- - - -

이 기능을 사용하려면, eog-plugins를 설치해야 합니다.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

상태 표시줄에서도 사진을 찍을 때 사용한 카메라 설정을 볼 수 있습니다. 플러그인 탭의 EXIF 표시를 선택하고 기본 설정을 누르십시오. 카메라 설정을 상태 표시줄에 표시 확인란에 표시하십시오.

- - -
- -
- 사진 위치 지도 표시하기 -

카메라에 따라서는 디지털 사진에 위치 정보(위치 태그)를 넣기도 합니다. 위치 태그는 사진을 찍은 위치의 GPS 좌표(위도 및 경도)를 말합니다.

- - - -

이 기능을 사용하려면, eog-plugins를 설치해야 합니다.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

사진에 위치 정보가 들어 있는 경우, 사진을 찍은 위치를 표시하는 지도를 표시합니다. 위치 정보를 넣지 않는 카메라도 많습니다.

-
- - - diff -Nru eog-3.26.2/help/ko/plugin-fullscreen-background.page eog-3.27.90/help/ko/plugin-fullscreen-background.page --- eog-3.26.2/help/ko/plugin-fullscreen-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - 전체화면 모드에서 배경색 바꾸기. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -전체 화면 배경색 바꾸기 - -

전체 화면 모드의 배경색을 바꿀 수도 있습니다.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

그러면, 전체 화면 모드에서 배경색이 아까 선택한 색이 됩니다.

- -

이 기능을 사용하려면, eog-plugins를 설치해야 합니다.

- - diff -Nru eog-3.26.2/help/ko/plugin-fullscreen-double-click.page eog-3.27.90/help/ko/plugin-fullscreen-double-click.page --- eog-3.26.2/help/ko/plugin-fullscreen-double-click.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - 사진을 두 번 눌러서 전체 화면 모드로 바꿉니다. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -두 번 눌러서 전체 화면 - - - -

이미지 보기에서 사진을 두 번 눌러서 전체 화면으로 표시하도록 만들 수 있습니다.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

이제 이미지 위에 두 번 누르면 전체 화면과 일반 창 모드 사이를 왔다갔다합니다.

- - diff -Nru eog-3.26.2/help/ko/plugin-picasa.page eog-3.27.90/help/ko/plugin-picasa.page --- eog-3.26.2/help/ko/plugin-picasa.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - 이미지 보기에서 쉽게 피카사웹에 사진 업로드하기. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -<app>피카사웹</app>에 사진 업로드하기 - -

피카사웹은 사진을 온라인으로 공유하는 사진 앨범 서비스입니다. 간편하게 사진을 피카사웹에 업로드하는 단추를 추가할 수 있습니다.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

이 기능을 사용하려면, eog-plugins를 설치해야 합니다.

- - diff -Nru eog-3.26.2/help/ko/plugin-python-console.page eog-3.27.90/help/ko/plugin-python-console.page --- eog-3.26.2/help/ko/plugin-python-console.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - 파이썬 콘솔을 사용해 이미지 보기에서 여러가지 기능을 추가하고 스크립트를 실행할 수 있습니다. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -파이썬 콘솔 - -

이미지 보기에는 파이썬 스크립트 언어를 사용한 플러그인 시스템이 있습니다. 파이썬 콘솔을 사용하면, 이미지 보기 안에서 직접 파이썬 인터프리터를 사용할 수 있습니다. 예를 들어 파이썬 콘솔에서 스크립트를 작성하거나 프로그램으로 이미지를 처리하는 등의 일을 할 수 있습니다.

- - - -

이 기능을 사용하려면, eog-plugins를 설치해야 합니다.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

파이썬 콘솔 확인란에 표시하고 닫기를 누릅니다.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/ko/plugin-send-by-mail.page eog-3.27.90/help/ko/plugin-send-by-mail.page --- eog-3.26.2/help/ko/plugin-send-by-mail.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,42 +0,0 @@ - - - - - - 쉽게 사진을 새 메일에 첨부해서 보내기. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -사진을 메일로 보내기 - -

간편하게 사진을 메일로 보내는 단추를 추가할 수 있습니다.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

이 기능을 사용하려면, eog-plugins를 설치해야 합니다.

- - -

이 기능이 동작하려면, 에볼루션 메일을 설정해 내 전자메일 계정에 연결해야 합니다.

- - - - - diff -Nru eog-3.26.2/help/ko/plugin-slideshow-shuffle.page eog-3.27.90/help/ko/plugin-slideshow-shuffle.page --- eog-3.26.2/help/ko/plugin-slideshow-shuffle.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ko/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - - 슬라이드 쇼를 표시할 때 임의 순서로 사진 표시하기. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -슬라이드 쇼 임의 모드 - -

슬라이드 쇼를 시작할 때 임의 순서로 사진을 표시하게 할 수 있습니다.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

이 기능을 사용하려면, eog-plugins를 설치해야 합니다.

- - diff -Nru eog-3.26.2/help/ko/plugins.page eog-3.27.90/help/ko/plugins.page --- eog-3.26.2/help/ko/plugins.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ko/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,82 +0,0 @@ - - - - - - 플러그인 설치해 추가 기능 이용하기. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -플러그인 - -

eog-plugins 패키지에 이미지 보기의 추가 플러그인이 들어 있습니다. 플러그인을 사용하면 아래와 같은 확장된 기능을 추가합니다.

- - -

리눅스 배포판의 패키지 관리 프로그램에서 eog-plugins를 설치할 수 있습니다.

- - - -

eog-plugins 설치

- - - - -

다음 기능이 eog-plugins에 들어 있습니다:

- - - -

상태 표시줄에 시각: 창의 상태 표시줄에 이미지 시각을 표시합니다.

- - -

EXIF 표시: 디지털 사진의 카메라 설정 및 히스토그램을 표시합니다.

- - -

전체 화면 배경: 전체 화면 모드의 배경을 바꿀 수 있습니다.

- - -

두 번 눌러 전체 화면: 두 번 눌러 전체 화면 모드로 들어갑니다.

- - -

지도: 지도에서 디지털 사진의 지리적 위치를 표시합니다.

- - -

피카사웹 업로드: 사진을 피카사웹에 업로드합니다.

- - -

파이썬 콘솔: 이미지 보기 파이썬 콘솔.

- - -

메일로 보내기: 사진을 메일에 첨부해서 친구에게 보냅니다.

- - -

슬라이드 쇼 임의 모드: 슬라이드쇼 모드에서 임의 이미지를 엽니다.

- - -

이미지 너비에 맞춰 확대/축소: 이미지 폭이 창 크기에 맞도록 확대/축소 수준을 조절합니다.

- - - - -

기본 설정 창의 플러그인 탭을 사용해 플러그인을 관리할 수 있습니다.

- - - diff -Nru eog-3.26.2/help/ko/plugin-zoom-width.page eog-3.27.90/help/ko/plugin-zoom-width.page --- eog-3.26.2/help/ko/plugin-zoom-width.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ko/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - 사진의 너비를 창 크기에 맞게 확대/축소합니다. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -사진 너비 맞게 확대/축소 - -

사진이 창 너비를 채우게 하려면 이미지 너비 맞춰 확대/축소를 사용하십시오.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

이 기능을 추가하려면 eog-plugins을 설치해야 합니다.

- - diff -Nru eog-3.26.2/help/ko/preferences.page eog-3.27.90/help/ko/preferences.page --- eog-3.26.2/help/ko/preferences.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ko/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,93 +0,0 @@ - - - - - - 이미지 보기, 슬라이드 쇼, 플러그인. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -기본 설정 -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-이미지 보기 기본 설정 - - - - 이미지 개선 -

확대할 때 이미지 부드럽게 옵션을 사용하면 확대나 축소할 때 이미지를 부드럽게 만듭니다. 이 옵션을 사용하면 해상도가 낮아 픽셀이 보이는 사진에서 울퉁불퉁한 경계선을 부드럽게 만들어 보기 좋아집니다.

-

자동 방향을 사용하면, EXIF 메타데이터에 따라 자동으로 사진을 회전합니다. EXIF 메타데이터는 디지털 카메라가 자동으로 넣는 정보로, 사진을 찍을 때 카메라를 어떤 방향으로 잡았는지 정보가 들어 있을 수도 있습니다. 예를 들어, 자동 방향을 사용하면 세로 방향 사진은 자동으로 위로 긴 방향으로 회전됩니다. 회전된 이미지를 저장하지 않으면 회전 내용은 저장하지 않습니다.

-

자동 방향은 일부 사진에 대해서만 동작합니다. EXIF 방향 메타데이터를 저장하는 카메라에서 찍은 사진만 회전됩니다.

- - - 투명한 부분 -

다음 옵션 중의 하나를 선택해 투명 부분을(투명 부분이 있으면) 어떻게 표시할 지 설정합니다:

- - -

체크무늬로:

-

이미지의 투명한 부분을 체크무늬로 표시합니다.

- - -

지정한 색으로:

-

이미지의 투명한 부분을 지정한 한 가지 색으로 표시합니다. 색 선택 단추를 색을 눌러 지정합니다.

- - -

배경으로:

-

배경의 지정한 색으로 설정했으면, 이미지의 투명한 부분을 배경 색으로 표시합니다. 아니면 기본 배경 색을 사용합니다.

- - - - -
- - -
-슬라이드 쇼 기본 설정 - -

슬라이드 쇼 설정을 바꾸려면:

- - -

이미지 확대/축소에서 화면보다 작은 사진을 화면 크기에 맞게 조정할지 지정합니다.

- - -

차례에서 사진 한 장마다 몇 초 동안 표시할 지 지정합니다(1에서 100까지).

- - -

슬라이드 쇼를 계속 반복하려면 반복 확인란을 누르십시오. 이 확인란이 꺼져 있으면 슬라이드 쇼가 선택한 사진부터 시작해서 폴더의 마지막 사진에서 끝납니다.

- - -
- - -
-플러그인 기본 설정 - - - - -

여기에서 추가 기능을 원하는대로 활성화하거나 해제할 수 있습니다. 왼쪽의 사진은 기본으로 사용 가능한 플러그인을 말합니다.

- -

eog-plugins 패키지를 설치해야 할 수도 있습니다. 이 패키지에는 추가 기능을 제공하는 플러그인이 들어 있습니다. 이 패키지를 설치한 다음, 오른쪽의 그림과 같이 추가 플러그인을 활성화해야 할 수 있습니다.

-
- - diff -Nru eog-3.26.2/help/ko/print.page eog-3.27.90/help/ko/print.page --- eog-3.26.2/help/ko/print.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ko/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -사진 인쇄하기 - -

현재 보고 있는 사진을 인쇄하려면:

- - - -

Click Print….

- - -

일반 탭을 선택하십시오, 사용하려는 프린터와 인쇄하려는 매수를 고르십시오.

- - -

이미지 설정 탭으로 가서. 사진의 위치 및 크기를 조정할 수 있습니다.

-

이미지를 마우스로 끌어서 페이지에서 위치를 조정할 수도 있습니다.

- - -

고화질 사진 인화지를 사용하려면, 페이지 설정 탭으로 가서 용지 종류를 맞추십시오. 화질 탭에서 고화질 설정을 하면, 가장 좋은 화질로 사진을 인쇄합니다.

- - -

인쇄를 누르십시오.

- - - -

위에서 언급한 탭은 프린터 모델에 따라 없을 수도 있습니다. 해당 프린터의 프린터 드라이버에서 해당 설정을 못 하기 때문입니다. 예를 들어 화질 탭이 없으면, 사용하는 프린터의 드라이버에서 관련 설정을 지원하지 않습니다.

- - diff -Nru eog-3.26.2/help/ko/rename-multiple.page eog-3.27.90/help/ko/rename-multiple.page --- eog-3.26.2/help/ko/rename-multiple.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ko/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ - - - - - - - 자동으로 여러 장의 사진의 이름을 바꾸거나 번호를 붙입니다. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -여러 개 사진의 이름 한꺼번에 바꾸기 - -

이름을 바꾸려는 사진이 여러 개 있고, 아마도 일정한 기준에 따라 번호가 붙이는 방법으로 이름을 바꾸려면:

- - - -

F9 키를 눌러 이미지 모음을 여십시오.

- - -

이미지 모음에서 Ctrl 키를 누른 채로 이미지를 눌러 이름을 바꾸려는 사진을 하나씩 선택하십시오.

-

다른 방법으로, CtrlA 키를 눌러 모든 사진을 선택합니다.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

이름을 바꾼 사진은 기본값으로 현재 폴더에 저장합니다. 다른 위치에 저장하려면 대상 폴더를 바꾸십시오.

- - -

파일 이름 형식에서 사진의 이름 형식을 지정합니다. 파일 이름 미리 보기에서 새 파일 이름이 어떻게 될지 표시합니다. 파일의 이름을 바꾸는 방법에 대해서는 아래의 부분을 보십시오.

- - -

형식을 변환하려는 게 아니면, 파일 이름 형식 드롭다운 메뉴를 그대로로 하십시오.

- - -

다른 이름으로 저장을 누르면 사진 이름이 바뀝니다.

- - - - - -
- 파일 이름 형식 고르기 -

바꾼 파일 이름은 파일 이름 형식 입력란에 입력한 내용에 따라 결정됩니다.

- - -

파일 이름 형식 입력란에 %f라고 쓰면 원본 파일 이름을 새 파일 이름의 일부분으로 사용할 수 있습니다.

-

예를 들어 파일 이름 형식 입력란에 파리_%f라고 입력하면, 꽃.jpg, 집.jpg, 고양이.jpg 파일은 파리_꽃.jpg, 파리_집.jpg, and 파리_고양이.jpg 파일이 됩니다.

- - -

%n을 붙이면 사진에 번호를 순서대로 붙입니다. 시작 번호는 옵션에서 지정합니다.

-

예를 들어 파일 이름 형식 입력란에 햇살_%n이라고 입력하면, 꽃.jpg, 집.jpg, 고양이.jpg 파일은 햇살_2.jpg, 햇살_3.jpg, 햇살_1.jpg 파일이 됩니다. (원본 파일 이름의 알파벳 순서로 번호가 매겨집니다.)

- - -
- - diff -Nru eog-3.26.2/help/ko/shortcuts.page eog-3.27.90/help/ko/shortcuts.page --- eog-3.26.2/help/ko/shortcuts.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ko/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,162 +0,0 @@ - - - - - - 모든 키보드 바로 가기 목록. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -키보드 바로 가기 - -

다음은 이미지 보기에서 사용할 수 있는 키보드 바로 가기의 전체 목록입니다.

- -
- 열기, 닫기, 저장, 인쇄 - - - - - - - - - - - - - - - - - - - - - - - - - -

이미지 파일 열기

CtrlO

이미지를 같은 파일 이름으로 저장합니다

CtrlS

현재 이미지의 복사본을 새 파일 이름으로 저장합니다

ShiftCtrlS

현재 이미지 인쇄

CtrlP

현재 창을 닫습니다

CtrlW

현재 이미지를 바탕 화면 배경으로 사용합니다.

CtrlF8

-
- -
- 이미지 보기 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

폴더의 이전 이미지로 이동합니다

백스페이스 / 왼쪽 화살표

폴더의 다음 이미지로 이동합니다

스페이스바 / 오른쪽 화살표

폴더의 첫번째 이미지로 이동합니다

AltHome

폴더의 마지막 이미지로 이동합니다

AltEnd

폴더의 임의의 이미지로 이동합니다

CtrlM

이미지 모음을 봅니다

F9

전체화면으로 봅니다

F11

슬라이드 쇼를 봅니다

F5

실제 크기

Ctrl0 (숫자 영 키)

창에 맞게

F

큰 이미지를 스크롤하기

Alt화살표 키

-
- -
- 이미지를 복사하고 다른 프로그램에서 붙여넣기 - - - - - -

복사

CtrlC

-
- -
- 확대/축소 및 회전 - - - - - - - - - - - - - - - - - -

확대

+

축소

-

시계 방향 회전

CtrlR

시계 반대 방향 회전

ShiftCtrlR

-
- -
- 기타 - - - - - - - - - - - - - - - - - -

가장자리 창을 봅니다

CtrlF9

이미지 속성을 봅니다

AltReturn

실행 취소

CtrlZ

도움말

F1

-
- diff -Nru eog-3.26.2/help/ko/slideshow.page eog-3.27.90/help/ko/slideshow.page --- eog-3.26.2/help/ko/slideshow.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ko/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -슬라이드 쇼 - -

폴더에 들어 있는 사진 모두를 슬라이드 쇼로 보려면:

- - - -

폴더 안의 사진 중 하나를 엽니다.

- - -

Click Slideshow or press - F5.

-

전체 화면 슬라이드 쇼가 시작합니다. 매 몇 초 간격으로 다음 사진을 표시합니다. 더 빨리 움직이거나, 앞에서 표시한 이미지로 돌아가려면, 왼쪽 화살표 및 오른쪽 화살표 키를 수동으로 눌러 앞뒤로 움직일 수 있습니다.

- - -

슬라이드 쇼를 멈추려면, Esc 또는 F5 키를 누르십시오.

- - - -

슬라이드 쇼 설정에서 사진 한 장을 표시하는 시간 따위를 설정할 수 있습니다. 자세히 보려면 슬라이드 쇼 기본 설정 부분을 보십시오.

- - diff -Nru eog-3.26.2/help/ko/translate.page eog-3.27.90/help/ko/translate.page --- eog-3.26.2/help/ko/translate.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ko/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - 이미지 보기 지역화 - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -번역 돕기 -

이미지 보기 사용자 인터페이스와 문서는 전세계의 자발적인 커뮤니티에서 번역하고 있습니다. 여러분도 참여할 수 있습니다.

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

IRC를 사용해 그놈 번역자와 대화할 수 있습니다. 채널에 있는 사람은 전 세계에 흩어져 있기 때문에, 시간대 차이가 있어서 즉시 응답을 받지 못할 수도 있습니다.

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/ko/view.page eog-3.27.90/help/ko/view.page --- eog-3.26.2/help/ko/view.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ko/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,70 +0,0 @@ - - - - - - 왼쪽 화살표 및 오른쪽 화살표를 눌러 사진을 넘어가십시오. 아니면 이미지 모음에서 사진을 한 눈에 볼 수도 있습니다. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - -폴더의 전체 사진 보기 - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- 폴더에 들어 있는 사진 둘러보기 -

사진 여러 장이 들어 있는 폴더가 있으면, 사진을 하나하나 열 필요 없이 전체 사진을 편리하게 둘러 볼 수 있습니다.

- - -

폴더 안의 사진 중의 하나를 엽니다.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

일반 모드로 돌아가려면, Esc 또는 F11 키를 누르십시오.

- - -
- - - - diff -Nru eog-3.26.2/help/ko/zoom.page eog-3.27.90/help/ko/zoom.page --- eog-3.26.2/help/ko/zoom.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ko/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - 류창우 - cwryu@debian.org - 2007-2008, 2011, 2014. - - - -확대/축소 - -

사진을 확대 또는 축소해, 사진이 화면에 나오는 부분을 조절할 수 있습니다. 큰 사진을 한 화면에 보고 싶거나, 사진의 일부분을 자세히 보고 싶을 경우에 좋습니다.

- - - -

마우스 휠로 확대/축소를 할 수 있습니다. 휠을 올리면 확대하고, 내리면 축소합니다.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- 창 크기에 맞추기 -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/LINGUAS eog-3.27.90/help/LINGUAS --- eog-3.26.2/help/LINGUAS 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/help/LINGUAS 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,31 @@ +# please keep this list sorted alphabetically +ar +ca +cs +da +de +el +en_GB +es +eu +fi +fr +gl +hu +it +ja +ko +lv +oc +pa +pl +pt_BR +ro +ru +sl +sv +te +th +uk +zh_CN +zh_TW diff -Nru eog-3.26.2/help/lv/bug-filing.page eog-3.27.90/help/lv/bug-filing.page --- eog-3.26.2/help/lv/bug-filing.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Iesniegt kļūdas ziņojumu par Attēlu skatītājs. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0 license.

- - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Ziņo par kļūdu par attēlu skatītāju. -

Attēlu skatītājs tiek uzturēts, pateicoties brīvprātīgo kopienai. Esat laipni aicināti piedalīties.

- -

Ja tu sastopies ar problēmām attēlu skatītājā (piemēram, ja tā avarē vai darbojas ne tā, kā gaidīts), vai arī ja tu uzskati, ka tam trūkst kāda funkcionalitāte, kas, tavuprāt, būtu nepieciešama, lūdzu iesniedz problēmas ziņojumu, nospiežot uz adreses . Pateicoties ziņojumiem, programmatūras veidotāji var atrast kļūdas un tās izlabot.

-

Lai iesaistītos, tev ir nepieciešams konts, kurš tev dos iespēju iesniegt problēmu ziņojumus un pievienot komentārus. Nepieciešams reģistrēties arī tāpēc, lai saņemtu statusa atjauninājumus par tavu ziņojumu caur e-pastu. Ja tev vēl nav konta, spied uz Jauns Konts, lai to izveidotu.

-

Kolīdz jums ir konts, ieejiet sistēmā un spied File a BugCoreeog. Pirms kļūdas iesniegšanas, lūdzu izlasiet kļūdu iesniegšanas padomus, kā arī, lūdzu meklējiet vai tāda kļūda jau nav iesniegta.

-

Lai iesniegtu savu ziņojumu, izvēlies komponenti, Component izvēlnē. Ja neesi pārliecināts, kurai komponentei atbilst kļūda, izvēlies general.

-

Ja pieprasi jaunu funkcionalitāti, izvēlies enhancement, Severity izvēlnē. Aizpildi kopsavilkums un apraksts sadaļas un spied Submit Bug.

-

Tavam iesniegumam tiks iedots ID numurs un tā statuss tiks atjaunots tiklīdz ar to sāks strādāt. Kļūdu labošana var aizņemt daudz laika un lietotnes veidotāji var tev pajautāt papildus informāciju, lai vieglāk izprastu problēmu.

- diff -Nru eog-3.26.2/help/lv/commandline.page eog-3.27.90/help/lv/commandline.page --- eog-3.26.2/help/lv/commandline.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - Komandrinda - eog komanda var atvērt jebkādu skaitu attēlus dažādos režīmos. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Komandrinda - -

Lai palaistu Attēlu skatītāju no Termināļa lietotnes, ieraksti eog.

-

Varat atvērt noteiktu datni, ierakstot tā nosaukumu pēc eog komandas:

-eog attēls.jpeg -

Tu vari atvērt noteiktu mapi, ierakstot tās nosaukumu pēc eog komandas:

-eog mape -

Lai redzētu visus attēlus mapē vienlaicīgi, vari pārlūkot attēlu galeriju.

- -
- Atvērt attēlu pilnekrāna režīmā - eog --fullscreen attels.jpeg -
- -
- Atvērt attēlu jaunā eksemplārā - eog --new-instance attēls.jpeg -
-
- Atvērt mapi slīdrādes režīmā - eog --slide-show Attēli/ -
- diff -Nru eog-3.26.2/help/lv/copy-paste.page eog-3.27.90/help/lv/copy-paste.page --- eog-3.26.2/help/lv/copy-paste.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - - - Kā no attēlu skatītāja kopēt/ielīmēt citā lietotnē. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Kopēt un ielīmēt attēlu -

Lai nokopētu attēlu no attēlu skatītāja uz citu lietotni veic labo peles klikšķi uz attēla un izvēlies Kopēt.

- -

Attēls tiks iekopēts uz starpliktuvi un var tikt ielīmēts LibreOffice dokumentā, Gimp attēlā vai kādā citā lietotnē.

- - diff -Nru eog-3.26.2/help/lv/default.page eog-3.27.90/help/lv/default.page --- eog-3.26.2/help/lv/default.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Padari attēlu skatītāju par noklusēto lietotni attēlu aplūkošanai. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Atver attēlus attēlu skatītājā pēc noklusējuma -

Ja tu vēlies, lai attēlu skatītājs būtu noklusētā lietotne, ar kuru vērt noteiktus attēlu tipus:

- - - -

Datņu pārlūkā veic labo peles klikšķi uz datnes un izvēlieties Īpašības.

- - -

Dodies uz Atvērt Ar cilni. Parādīsies saraksts ar Ieteiktās lietotnes.

- - -

Izvēlies Attēlu skatītāju un nospied Iestatīt kā noklusēto.

-

Ja Attēlu skatītājs navIeteikto lietotņu sarakstā, spied Rādīt citas lietotnes. Izvēlies Attēlu skatītājs no saraksta, kurš parādās un spied Iestatīt kā noklusēto.

- - -

Spied Aizvērt.

- - - -

Turpmāk, kad veiksiet dubultklikšķi uz attēla datnes, tas atvērsies attēlu skatītājā.

- - diff -Nru eog-3.26.2/help/lv/desktop-background.page eog-3.27.90/help/lv/desktop-background.page --- eog-3.26.2/help/lv/desktop-background.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Iestatīt sev tīkamu attēlu kā darbvirsmas fona attēlu. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Padari aktuālo attēlu par darbvirsmas fonu -

Lai attēlu, kuru skaties, iestatītu par darbvirsmas fonu, spied Iestatīt kā tapeti.

- -

Tas uzreiz nomainīs fona attēlu uz aktuālo attēlu skatītājā. Tad tev tiks jautāts, vai tu vēlies izmainīt attēlu izskatu, izmantojot fons iestatījumu logu. Ja tu nospiedīsi Paslēpt, ziņa pazudīs.

- diff -Nru eog-3.26.2/help/lv/develop.page eog-3.27.90/help/lv/develop.page --- eog-3.26.2/help/lv/develop.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Esi sveicināts Attēlu skatītājā - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0 license.

- - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Palīdzi veidot -

Attēlu skatītāju veido izstrādātāju un uzturētāju kopiena. Tu esi laipni lūgts piedalīties.

-

Ja vēlaties palīdzēt veidot attēlu skatītāju, varat sazināties ar izstrādātājiem, izmantojot irc, vai ar adresātu sarakstu.

- - diff -Nru eog-3.26.2/help/lv/documentation.page eog-3.27.90/help/lv/documentation.page --- eog-3.26.2/help/lv/documentation.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - Pievienojieties dokumentācijas komandai. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0 license.

- - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Palīdziet rakstīt dokumentāciju - -

Attēlu skatītāja dokumentāciju uztur brīvprātīgo kopiena. Esat laipni lūgti piedalīties.

- -

Lai piedalītos dokumentācijas projektā, droši sazinieties, izmantojot irc, vai caur adresātu sarakstu.

-

Mūsu viki lapa satur noderīgu informāciju.

- - - diff -Nru eog-3.26.2/help/lv/edit.page eog-3.27.90/help/lv/edit.page --- eog-3.26.2/help/lv/edit.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Spied Atvērt ar, lai rediģētu attēlu, izmantojot kādu citu attēlu rediģētāju. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - -Rediģēt vai izdzēst attēlu - -
Rediģēt attēlu -

Attēlu skatītājs var tikt izmantots tikai attēlu skatīšanai; to nevar izmantot rediģēšanai. Lai rediģētu attēlus, tev jāizmanto kāda attēlu rediģēšanas programma, piemēram GIMP. Lai atvērtu attēlu rediģēšanai citā programmā:

- - -

Spied Atvērt ar vai veic labo peles klikšķi uz attēla.

- - -

Izvēlies programmu, ar kuru vēlies rediģēt attēlu.

- - -

Kad esi pabeidzis rediģēt, saglabā attēlu un aizver rediģēšanas programmu.

- - -

Attēlu skatītājs lietotne noteiks, kad attēls ir rediģēts un prasīs, vai to pārlādēt.

- - -
- -
-Izdzēst attēlu -

Lai izdzēstu attēlu, kuru vairāk nevajag, veic labo peles klikšķi uz attēla un izvēlies Pārvietot uz miskasti.

-
- - diff -Nru eog-3.26.2/help/lv/flip-rotate.page eog-3.27.90/help/lv/flip-rotate.page --- eog-3.26.2/help/lv/flip-rotate.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,67 +0,0 @@ - - - - - - Horizontāli/vertikāli, pulksteņrādītāja virzienā/pretēji pulksteņrādītāja virzienam - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Apmest vai pagriezt attēlus - -

Ja tavi attēli ir nepareizi pagriezti vai ar aizmuguri uz priekšu, tu vari apmest vai apgriezt tos, lai izskatītos pareizi.

- - -
-Apmest attēlu - -

Spied Rediģēt.

 -

Izvēlies vai nu Apmest horizontāli vai Apmest vertikāli.

 - -

Ja tu vēlies attēlu paturēt šādi apmestu, spied Saglabāt.

-

Citādāk apgrieztais attēls nesaglabāsies un nākamreiz, kad to atvērsi, tā būs iepriekšējā orientācijā.

- - -
- -
-Pagriezt attēlu - -

Pārvietojiet peles rādītāju virs attēla. Apakšā parādīsies divas bultas.

 -

Izvēlieties vai nu Pagriezt attēlu 90 grādus pa kreisi vai Pagriezt attēlu 90 grādus pa labi.

 - -

Ja tu vēlies šo attēlu saglabāt šādā veidā, spied Saglabāt.

-

Citādāk apgrieztais attēls nesaglabāsies un nākamreiz, kad to atvērsi, tā būs iepriekšējā orientācijā.

- - - -

Kā arī varat izmantot tastatūras saīsnes:

- - - - - - - - - - -

Pagriezt pulksteņrādītāja virzienā

CtrlR

Pagriezt pretēji pulksteņrādītāja virzienam

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/lv/format-change.page eog-3.27.90/help/lv/format-change.page --- eog-3.26.2/help/lv/format-change.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,76 +0,0 @@ - - - - - - Tu vari pārvērst attēlus no viena formāta uz citu. To var arī darīt uzreiz ar vairākiem attēliem reizē. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Pārvērst citā datņu formātā - -

Attēli tiek saglabāti noteiktā datņu formātā, piemēram JPEG vai PNG. Varat pārveidot datni no viena formāta uz citu.

- -
- Pārvērst vienu attēlu uz citu datņu formātu - - -

Spiediet Saglabāt kā…. Parādīsies logsSaglabāt attēlu.

- - -

Nosaukuma laukumā nomainiet datnes paplašinājumu uz datnes tipu, kurā vēlies pārvērst savu attēlu. Datnes paplašinājums ir daļa no datnes nosaukuma pēc punkta.

-

Piemēram, lai pārvērstu JPEG (.jpg) datni uz bitkartes (.bmp) datni:

-

sākotnējā datne: attēls.jpg

-

jaunā datne: attēls.bmp

- - -

Spied Saglabāt un tiks saglabāta jauna datne ar jaunu formātu. Vecā datne (vecajā formātā) paliks tur pat, kur bij un netiks izdzēsta.

- - - -

Attēlu skatītājs mēģinās uzminēt formātu, kādā attēlu saglabāt, balstoties uz attēla paplašinājumu, kuru ierakstīsiet. Ja tas tomēr neatpazīst paplašinājumu, kuru izmantojat, vai arī, ja tu nezināt, kuru izmantot, spiediet Atbalstītās attēlu datnes Saglabāt attēlu logā. Tas ļaus izvēlēties datnes tipu no saraksta.

- -
- -
- Pārvērst vairākus attēlus reizē uz citu formātu. -

Tu reizē vari pārvērst vairākus attēlus no viena formāta uz citu. Tas ir noderīgi, ja tev ir daudz attēlu, kuras nepieciešams pārvērst.

- - -

Attēlu galerijā turi nospiestu Ctrl taustiņu un izvēlies attēlus, kurus vēlies pārvērst. Lai izvēlētos visus attēlus uzreiz, tu vari spiest CtrlA.

- - -

Spiediet Saglabāt kā…. Parādīsies logs (skatīt zemāk).

- - - -

Pārvērstie attēli tiks saglabāti esošajā mapē pēc noklusējuma. Ja tu vēlies tos saglabāt citur, nomaini Mērķa mape.

- - -

Izvēlies datnes formātu, uz kuru vēlies pārveidot attēlus, no izkrītošā saraksta pa labi no Datnes nosaukuma formāts lauka.

- - -

Spied Saglabāt.

- - -
- - diff -Nru eog-3.26.2/help/lv/formats-save.page eog-3.27.90/help/lv/formats-save.page --- eog-3.26.2/help/lv/formats-save.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - JPEG, PNG, BMP u.c. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - - Attēlu saglabāšanas atbalstītie formāti -

Attēlu skatītājs var saglabāt attēlus šādos datņu formātos:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

Ir iespējams saglabāt citus attēlu formātus atkarībā no sistēmas konfigurācijas.

 - diff -Nru eog-3.26.2/help/lv/formats-view.page eog-3.27.90/help/lv/formats-view.page --- eog-3.26.2/help/lv/formats-view.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - - Attēlu skatītājs var atainot dažādu formātu attēlus, ieskaitot PNG, JPEG un TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - - Atbalstītie attēlu formāti - -

Attēlu skatītājs var atvērt šādu formātu attēlus:

- -

ANI - Animācija

 -

BMP - Bitkarte

 -

GIF - grafikas interfeisa formāts

 -

ICO - Windows Ikona

 -

JPEG/JPG - apvienotā fotoekspertu grupa

 -

PCX - formāts PCX

 -

PNG - portatīvā tīkla grafika

 -

PNM - Pārnesams Anymap no PPM rīkkopas

 -

RAS - Sun rastrs

 -

SVG - mērogojama vektoru grafika

 -

TGA - Targa

 -

TIFF - tagu attēlu datņu formāts

 -

WBMP - bezvadu bitkarte

 -

XBM - X bitkarte

 -

XPM - X Pikseļkarte

 - -

Ja tu mēģināsi atvērt attēlu ar neatbalstītu formātu, tiks parādīts Neizdevās ielādēt attēlu 'attēla_nosaukums'. paziņojums.

- diff -Nru eog-3.26.2/help/lv/index.page eog-3.27.90/help/lv/index.page --- eog-3.26.2/help/lv/index.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - Palīdzība Eye of GNOME attēlu skatītājam. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Attēlu skatītājs - Eye of GNOME Attēlu skatītājs - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> Eye of GNOME Attēlu skatītājs -
- Skatīt attēlus -
- -
- Rediģēt attēlus -
- -
- Drukāt attēlus -
- -
- Pievienot papildus funkcionalitāti - -
-
- Paplašināti -
- -
- Biežāk uzdotie jautājumi -
- -
- Padomi un triki -
- -
- Iesaisties -
- diff -Nru eog-3.26.2/help/lv/introduction.page eog-3.27.90/help/lv/introduction.page --- eog-3.26.2/help/lv/introduction.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Esi sveicināts Eye of GNOME Attēlu skatītājā! - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Ievads - -

Eye of GNOME ir attēlu skatītājs. Ar to var aplūkot gandrīz jebkura tipa attēlus. Tas var rīkoties ar lielām attēlu kolekcijām un var attēlot slīdrādi. Varat veikt vienkāršas izmaiņas attēlā, piemēram pagriezt vai apgriezt to, vai pārveidot uz citu datņu formātu.

- - diff -Nru eog-3.26.2/help/lv/legal.xml eog-3.27.90/help/lv/legal.xml --- eog-3.26.2/help/lv/legal.xml 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Šis darbs ir licencēts zem Creative Commons Attribution-Share Alike 3.0 ASV licence.

-

Kā īpašs izņēmums, autortiesību turētāji var dot jums atļauju kopēt, modificēt un izplatīt parauga kodu, kas ir šajā dokumentā, ar jums vēlamiem nosacījumiem, bez ierobežojumiem.

- diff -Nru eog-3.26.2/help/lv/license.page eog-3.27.90/help/lv/license.page --- eog-3.26.2/help/lv/license.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - - Juridiskā informācija. - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - - Licence -

Šis darbs tiek izplatīts ar CreativeCommons Attribution-Share Alike 3.0 neportēto licenci.

-

Jūs drīkstat:

- - - <em>Izplatīt</em> -

Kopēt, izplatīt un pārraidīt šo darbu.

- - - <em>Pārveidot</em> -

Adaptēt šo darbu.

- - -

Ar sekojošajiem nosacījumiem:

- - - <em>Attiecinājums</em> -

Darbs jāattiecina tādā veidā, kā to ir vēlējies autors vai licences devējs (bet ne tādā veidā, kas varētu likt domāt, ka tie apstiprina jūs vai jūsu darba izmantošanu).

- - - <em>Dalīties līdzīgi</em> -

Ja maināt, pārveidojat vai veidojat uz šī darba pamata, jūs drīkstat izplatīt iegūto rezultātu ar šādu pašu vai savietojamu licenci.

- - -

Lai redzētu pilnu licences tekstu, ejiet uz CreativeCommons tīmekļa vietni vai lasiet visu Commons aktu.

- diff -Nru eog-3.26.2/help/lv/open.page eog-3.27.90/help/lv/open.page --- eog-3.26.2/help/lv/open.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Attēli atveras jaunā logā. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - - -Atvērt attēlu - -

Attēliem vajadzētu automātiski atvērties attēlu skatītājā, kad spied uz tiem dubultklikšķi Datnes datņu pārlūkā. Ja tā nenotiek, jums vajag attēlu skatītāju uzstādīt kā noklusējuma lietotni attēlu skatīšanai.

- -

Pēc noklusējuma katrs attēls, kuru atvērsi, tiks ievietota jaunā attēla skatītāja logā, bet tu vari skatīt vairākus attēlus vienā logā, ja vēlies.

- -

Tu vari atvērt attēlus arī no attēlu skatītāju:

- -

Spiediet Atvērt… (vai spiediet CtrlO). Parādīsies logsAtvērt attēlu.

 -

Izvēlies attēlu, kuru vēlies atvērt un spied Atvērt.

 - - - diff -Nru eog-3.26.2/help/lv/plugin-exif-digital.page eog-3.27.90/help/lv/plugin-exif-digital.page --- eog-3.26.2/help/lv/plugin-exif-digital.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,81 +0,0 @@ - - - - - - Apskati attēla informāciju, tādu kā kameras iestatījumi, histograma, ģeogrāfiskā atrašanās vieta un datums. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Apskatīt detalizētu informāciju par attēlu - -

Attēli, uzņemti ar digitālajām kamerām, satur arī papildus informāciju, piemēram, uzņemšanas datumu, kameras iestatījumus un, dažos gadījumos pat vietu, kur tika uzņemts attēls.

- -

Šī sadaļa tev parādīs, kā piekļūt šai informācijai.

- -
-Parādīt datumu statusa joslā - -

Tu vari parādīt attēla uzņemšanas datumu statusa joslā, loga apakšā.

-

Lai to izdarītu, atveriet lietotnes izvēlni augšējā joslā, spiediet Iestatījumi un ejiet uz cilni Spraudņi. Tad atzīmējiet Datums statusa joslā.

-
- -
- Detalizēti Exif dati -

Detalizētu informāciju, kas saglabāta fotografējot ar digitālajiem fotoaparātiem, sauc par Exif datiem. Tu vari tos apskatīt, instalējot spraudni attēlu skatītājam.

- - - -

Lai iespējotu šo funkciju, tev ir nepieciešams eog-plugins.

- - -

Ja eog-plugins ir instalēts, atveries lietotnes izvēlni augšējā joslā un spiediet Iestatījumi. Tad atzīmējiet Exif attēlošana un aizveriet dialoglodziņu.

- - -

Ieslēdziet Sānu rūts, lai skatītu kameras iestatījumus fotogrāfijas uzņemšanas laikā. Lai arī redzētu histogrammu, kas rāda attēla krāsu un gaismas/ēnu balansu, cilnē Spraudņi izvēlieties Exif attēlošana un spiediet Iestatījumi. Sadaļā Histogramma atzīmējiet histogrammas, kuras vēlaties apskatīt.

- - -

Statusa joslā varat arī skatīt iestatījumus kamerai, kuru izmantoja fotogrāfijas uzņemšanai. Izvēlieties Exif attēlošana cilnē Spraudņi un spiediet Iestatījumi. Atzīmējiet Rādīt kameras iestatījumus statusa joslā.

- - -
- -
- Attēlot fotogrāfijas atrašanās vietas karti -

Dažas kameras digitālajiem fotoattēlam pievieno ģeogrāfiskās atrašanās vietas informāciju(geo birkas). Geo birkas parasti ir tikai foto uzņemšanas vietas GPS koordinātas (garums un platums).

- - - -

Lai iespējotu šo funkciju, tev ir nepieciešams eog-plugins.

- - -

Ja eog-plugins ir ieinstalēta, atveriet lietotnes izvēlni augšējā joslā, spiediet Iestatījumi un dodies uz Spraudņi cilni. Tad atzīmējiet Karte un aizveriet dialoglodziņu.

- - -

Ieslēdziet Sānu rūti, lai parādītu karti.

- - -

Karte parādīs vietu, kurā ir uzņemts attēls tikai tad, ja fotogrāfijai ir pievienota ģeogrāfiskās atrašanās vietas informācija. Daudzas kameras šo informāciju nepievieno.

-
- - - diff -Nru eog-3.26.2/help/lv/plugin-fullscreen-background.page eog-3.27.90/help/lv/plugin-fullscreen-background.page --- eog-3.26.2/help/lv/plugin-fullscreen-background.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Aktivē fona krāsas mainīšanu pilnekrāna režīmā. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Maina pilnekrāna fona krāsu - -

Ja vēlaties, varat mainīt fona krāsa pilnekrāna režīmā.

- -

Lai to izdarītu, atveriet lietotnes izvēlni augšējā joslā, spiediet uz Iestatījumi, ejiet uz cilni Spraudņi un atzīmējiet Pilnekrāna fons un spiediet Iestatījumi. Izvēlieties krāsu, kādu vēlaties redzēt pilnekrāna režīmā un aizveriet dialoglodziņu.

- -

Tagad pilnekrāna režīmā fona krāsa ir tā, kuru izvēlējāties.

- -

Lai iespējotu šo funkciju, tev ir nepieciešams eog-plugins.

- - diff -Nru eog-3.26.2/help/lv/plugin-fullscreen-double-click.page eog-3.27.90/help/lv/plugin-fullscreen-double-click.page --- eog-3.26.2/help/lv/plugin-fullscreen-double-click.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Aktivizē pilnekrāna režīmu, veicot dubutklikšķi uz kāda attēla. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Pilnekrāna režīms ar dubultklikšķi - - - -

Ja tu vēlies, tu vari konfigurēt tā, lai attēli tiek parādīti pilnekrāna režīmā, kad uz tiem uzspied ar dubultklikšķi.

- -

Lai to izdarītu, atveriet lietotnes izvēlni augšējā joslā, spiediet uz Iestatījumi, ejiet uz cilni Spraudņi un atzīmējiet Pilnekrāns ar dubultklikšķi un aizveriet dialoglodziņu.

- -

Tagad vari spiest dubultklikšķi uz attēla, lai pārslēgtos no pilnekrāna režīma uz parastu logu un atpakaļ.

- - diff -Nru eog-3.26.2/help/lv/plugin-picasa.page eog-3.27.90/help/lv/plugin-picasa.page --- eog-3.26.2/help/lv/plugin-picasa.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - - Viegli augšupielādējiet bildes uz PicasaWeb no Attēlu skatītāja. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Augšupielādē fotogrāfijas uz <app>PicasaWeb</app> - -

PicasaWeb ir fotogrāfiju albumu pakalpojums, kurš ļauj tev dalīties ar attēliem ar cilvēkiem tiešsaistē. Jūs varat pievienot saīsnes pogu, kas dod ērtu veidu, kā augšupielādēt attēlus uz PicasaWeb.

- -

Lai to izdarītu, atveriet lietotnes izvēlni augšējā joslā, spiediet Iestatījumi un ejiet uz cilni Spraudņi. Tad atzīmējiet PicasaWeb Uploader.

-

Tas jums dos ērtu Augšupielādēt PicasaWeb izvēlnes ierakstu.

- -

Lai iespējotu šo funkciju, tev ir nepieciešams eog-plugins.

- - diff -Nru eog-3.26.2/help/lv/plugin-python-console.page eog-3.27.90/help/lv/plugin-python-console.page --- eog-3.26.2/help/lv/plugin-python-console.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Python konsoli var izmantot, lai attēlu skatītājā pievienotu papildus funkcionalitāti un izpildītu skriptus. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Python konsole - -

Attēlu skatītājam ir spraudņu sistēma, kura izmanto Python skriptēšanas valodu. Ja tu aktivizē Python konsoli, tu vari iegūt tiešu piekļuvi Python interpretatoram no attēlu skatītāja, kuru tad tu vari izmantot, lai rakstītu skriptus vai programmēšanas ceļā manipulētu ar attēliem.

- - - -

Lai iespējotu šo funkciju, tev ir nepieciešams eog-plugins.

- - -

Ja eog-plugins ir ieinstalēta, atveriet lietotnes izvēlni augšējā joslā, spiediet Iestatījumi un dodies uz cilni Spraudņi.

- - -

Atzīmē Python Konsole un spied Aizvērt.

- - -

Spiediet Python Konsole, lai atvērtu konsoli.

- - - - diff -Nru eog-3.26.2/help/lv/plugin-send-by-mail.page eog-3.27.90/help/lv/plugin-send-by-mail.page --- eog-3.26.2/help/lv/plugin-send-by-mail.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,39 +0,0 @@ - - - - - - Ērti nosūti attēlus, pievienojot tos e-pastam. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Sūtīt attēlus pa e-pastu - -

Tu vari pievienot pogu, kas tevi nodrošinās ērtu attēlu sūtīšanupa e-pastu.

- -

Lai to izdarītu, atveriet lietotnes izvēlni augšējā joslā, spiediet Iestatījumi un dodies uz cilni Spraudņi. Tad atzīmējiet Sūtīt vēstuli un spiediet Aizvērt. Tas jums dos Sūtīt vēstuli izvēlnes ierakstu.

- -

Lai iespējotu šo funkciju, tev ir nepieciešams eog-plugins.

- - -

Evolution pasts ir jābūt konfigurētam e-pasta kontam,lai šis strādātu.

- - - - - diff -Nru eog-3.26.2/help/lv/plugin-slideshow-shuffle.page eog-3.27.90/help/lv/plugin-slideshow-shuffle.page --- eog-3.26.2/help/lv/plugin-slideshow-shuffle.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - - - Parādīt fotogrāfijas nejauši izvēlētā secībā slīdrādes laikā. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Slīdrādes maisītājs - -

Tu vari iestatīt, lai attēli tiktu parādīti nejauši izvēlētā secībā, kad tu sāc slīdrādi.

- -

Lai to izdarītu, atveriet lietotnes izvēlni augšējā joslā, spiediet uz Iestatījumi, ejiet uz cilni Spraudņi un atzīmējiet Slīdrādes maisītājs un aizveriet dialoglodziņu.

- -

Lai iespējotu šo funkciju, tev ir nepieciešams eog-plugins.

- - diff -Nru eog-3.26.2/help/lv/plugins.page eog-3.27.90/help/lv/plugins.page --- eog-3.26.2/help/lv/plugins.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,82 +0,0 @@ - - - - - - Instalē spraudņus, lai pievienotu papildus funkcionalitāti. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Spraudņi - -

Tu vari ieinstalēt eog-plugins paku, lai iegūtu papildus spraudņus attēlu skatītājam. Spraudņi pievieno papildus funkcionalitāti. Daži no spraudņiem aprakstīti zemāk.

- - -

Tu vari instalēt eog-plugins paku, izmantojot savas Linux distribūcijas paku pārvaldnieku.

- - - -

instalēt eog spraudņus

- - - - -

Šādas iespējas ir iekļautas eog-plugins pakā:

- - - -

Datuma statusjosla: rāda attēla datumu loga statusjoslā.

- - -

Exif attēlošana: Parāda kameras iestatījumus un digitālu fotogrāfiju histogrammas.

- - -

Pilnekrāna fons: Aktivē fona mainīšanu pilnekrāna režīmā.

- - -

Pilnekrāns ar dubultklikšķi:Ieslēgt pilnekrāna režīmu ar dubultklikšķi.

- - -

Karte: Parāda digitālās fotogrāfijas ģeogrāfisko atrašanās vietu kartē.

- - -

PicasaWeb augšupielādētājs: augšupielādē savus attēlus uz PicasaWeb servera.

- - -

Python konsole: Python skriptēšanas konsole attēlu skatītājam.

- - -

Sūtīt vēstuli: Sūti attēlu- draugiem, pievienojot to jaunam epastam.

- - -

Slīdrādes maisītājs: Maini attēlu secību slīdrādes režīmā.

- - -

Pielāgot attēla platumam: Iestata tālummaiņu, lai ietilpinātu attēlu tā pilnā platumā lietotnes logā.

- - - - -

Tu vari pārvaldīt spraudņus, izmantojot Spraudņu cilni, Iestatījumu logā.

- - - diff -Nru eog-3.26.2/help/lv/plugin-zoom-width.page eog-3.27.90/help/lv/plugin-zoom-width.page --- eog-3.26.2/help/lv/plugin-zoom-width.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Iestata tālummaiņu, lai ietilpinātu attēlu tā pilnā platumā lietotnes logā. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Pielāgot attēla platumam - -

Aktivizē Pielāgot attēla platumam spraudni, ja vēlies, lai attēla izmērs tiktu pielāgots lietotnes loga platumam.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

Lai pievienotu šo funkciju, tev vajadzēs būt ieinstalētam eog-plugins spraudnim.

- - diff -Nru eog-3.26.2/help/lv/preferences.page eog-3.27.90/help/lv/preferences.page --- eog-3.26.2/help/lv/preferences.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,91 +0,0 @@ - - - - - - Attēla skats, slīdrāde un spraudņi. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Iestatījumi -

Šī sadaļa apraksta visus iestatījumus, kurus var iestatīt attēlu skatītājā. Atveriet lietotnes izvēlni augšējā joslā un spiediet Iestatījumi, lai sāktu mainīt iestatījumus.

- - - -
-Attēla skata iestatījumi - - - - Attēla uzlabojumi -

Izvēlies Nogludināt attēlus samazinot, lai uzlabotu attēlu nogludināšanu, kad tu pietuvini vai attālini attēlu. Tas uzlabo zemas rezolūcijas (pikseļainu) attēlu izskatu, nogludinot asās šķautnes.

-

Ja ieslēgsiet Automātiski pagriezt, attēli tiks pagriezti atkarībā no to Exif metadatiem automātiski. Exif metadatus attēlam automātiski pievieno digitālā fotokamera un var saturēt informāciju par to, kā kamera tika turēta, kad fotogrāfija uzņemta. Piemēram, kad automātiskā pagriešana ir ieslēgta, portretu fotogrāfijas automātiski tiek rotētas otrādāk. Rotācija netiek saglabāta datnē, kamēr jūs nesaglabājat pagriezto attēlu.

-

Automātiskā pagriešana nedarbojas ar visiem attēliem; tikai fotogrāfijas, uzņemtas ar kameru, kura saglabā Exif orientācijas metadatus, tiks rotētas.

- - - Caurspīdīgās daļas -

Izvēlies vienu no opcijām, lai noteiktu kā atainot caurspīdīgas attēla daļas, ja tam tādas ir:

- - -

Rādīt rūtiņrakstu:

-

Parāda caurspīdīgās attēla daļas kā rūtiņrakstu.

- - -

Rādīt šo krāsu:

-

Jebkuru caurspīdīgo attēla daļu attēlo kā krāsu, ko norāda, nospiežot krāsas izvēles pogu.

- - -

Rādīt fonu:

-

Jebkuru caurspīdīgo attēla daļu parāda Fons krāsā, ja Rādīt šo krāsu zem Fons izvēlnes ir atzīmēta. Citādāk tiek izmantota noklusētā fona krāsa.

- - - - -
- - -
-Slīdrādes iestatījumi - -

Lai pielāgotu slīdrādes iestatījumus:

- - -

Attēla palielinājums izvēlnē tu vari izvēlēties, vai attēlus, kuri ir mazāki par ekrāna izmēriem, vēlies palielināt tā, lai tie aizpildītu ekrānu.

- - -

Secība izvēlnē, tu vari norādīt, cik ilgi (1-100 sekundes) katram attēlam būtu jātiek parādītai pirms to aizvieto nākamais attēls.

- - -

Atzīmē Automātiski atkārtot, ja tu vēlies, lai slīdrāde automātisku visu laiku tiktu atkārtota. Ja šī opcija nav atzīmēta, tad slīdrāde sāksies ar attēlu pēc tavas izvēles un beigsies ar pēdējo attēlu mapē.

- - -
- - -
-Spraudņu iestatījumi - - - - -

Šeit tu vari konfigurēt jebkuru papildiespēju, kuru vēlies aktivizēt vai atslēgt. Attēlā pa kreisi ir spraudņi, kas ir pieejami pēc noklusējuma.

- -

Tev varētu būt nepieciešamība ieinstalēt eog-plugins paku, kura satur spraudņus, kas sniedz vairākas papildiespējas. Pēc tā ieinstalēšanas, tu varēsi aktivizēt papildus spraudņus, tādus, kā tos, kuri parādīti attēlā pa labi.

-
- - diff -Nru eog-3.26.2/help/lv/print.page eog-3.27.90/help/lv/print.page --- eog-3.26.2/help/lv/print.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Spiediet Drukāt…, tad izmantojiet cilnes, lai mainītu drukāšanas iestatījumus. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Drukāt attēlu - -

Lai drukātu attēlu, kuru pašreiz apskati:

- - - -

Spiediet Drukāt….

- - -

Vispārīgi cilnē, izvēlies printeri, kuru vēlies izmantot un ievadi, cik kopijas izdrukāt.

- - -

Aizejot uz Attēla iestatījumi cilni, tu vari norādīt attēla Novietojums un Izmērs.

-

Attēla novietojums lappusē var tikt pielāgots arī to velkot pa lapu priekšskata režīmā.

- - -

Ja tu izmanto augstas kvalitātes fotopapīru, ej uz Lappuses iestatījumi cilni un izvēlies pareizo Papīra tips. Kā arī tev vajadzētu doties uz Attēla Kvalitāte cilni un izvēlēties augstas kvalitātes iestatījumu, tādējādi iegūstot labāko iespējamo attēla kvalitāti.

- - -

Spied Drukāt.

- - - -

Ievēro, ka dažas no augstāk minētajām cilnēm netiek attēlotas noteiktiem printeru modeļiem. Tas ir tāpēc, ka to printeru draiveri neļauj mainīt dažus iestatījumus. Tātad, ja tu neredzi Attēla kvalitāte cilni, tas, iespējams, nozīmē to, ka printera draiveri neatbalsta šo opciju.

- - diff -Nru eog-3.26.2/help/lv/rename-multiple.page eog-3.27.90/help/lv/rename-multiple.page --- eog-3.26.2/help/lv/rename-multiple.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,72 +0,0 @@ - - - - - - - Automātiski pārdēvēt un numurēt vairāku attēlu grupas. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Pārdēvēt vairākas attēlus reizē - -

Ja tev ir liels daudzums attēlu, kas jāpārdēvē, piemēram, lai tiem būtu standarta, numurēts nosaukuma formāts:

- - - -

Atver attēlu galeriju, nospiežot F9.

- - -

Lai izvēlētos attēlus, kurus vēlies pārdēvēt, nospiedCtrl taustiņu un pa vienam ar peli klikšķini uz izvēlētajiem attēliem.

-

Alternatīvi, nospied CtrlA, lai izvēlētos visus attēlus.

- - -

Spiediet Saglabāt kā…. Logs ar dažādām datņu nosaukuma iespējām tiks parādīts (attēlā zemāk redzams, kā izskatās šis logs).

- - -

Pārdēvētie attēli tiks saglabāti esošajā mapē. Lai tos saglabātu citur, izmaini Mērķa mape.

- - -

Izmanto Datnes nosaukuma formāts laukumu, lai izvēlētos attēlu nosaukumu formātu. Datnes nosaukuma priekšskatījums norāda, kā jaunie datņu nosaukumi izskatīsies. Lasiet sadaļu, kur ir ieteikumi par datņu pārdēvēšanas variantiem.

- - -

Pārliecinies, ka Datņu nosaukuma formāts saraksta izvēlnē ir minēts kā ir, izņemot ja vēlatieskonvertēt attēlus uz citu formātu.

- - -

Nospied Saglabāt kā un attēli tiks pārdēvēti.

- - - - - -
- Izvēlies datnes nosaukuma formātu -

Pārdēvēto datņu nosaukumi tiek noteikti pēc lauka Datnes nosaukuma formāts vērtības.

- - -

Varat paturēt oriģinālo datnes nosaukumu kā daļu no jaunā nosaukuma, atstājot %f nosaukuma laukā.

-

Piemēram, ja ierakstīsiet interesanta_%f Datnes nosaukuma formāts laukā, attēli, kuru nosaukums ir puķe.jpg, māja.jpg un pilsēta.jpg, tiktu pārdēvētas par interesanta_puķe.jpg, interesanta_māja.jpg un interesanta_pilsēta.jpg.

- - -

%n pievienošana numurēs attēlus pēc kārtas, sākot no tā numura, kuru būsi izvēlējies Opcijas izvēlnē.

-

Piemēram, ja Datnes nosaukuma formāts laukā ierakstīsiet ikdiena_%n, attēli ar nosaukumiem bumba.jpg, cinks.jpg un ābols.jpg tiks pārdēvētas par ikdiena_2.jpg, ikdiena_3.jpg un ikdiena_1.jpg. (To numurēšana notiks alfabētiskā secībā, vadoties pēc oriģinālajiem datņu nosaukumiem.)

- - -
- - diff -Nru eog-3.26.2/help/lv/shortcuts.page eog-3.27.90/help/lv/shortcuts.page --- eog-3.26.2/help/lv/shortcuts.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,162 +0,0 @@ - - - - - - Visu tastatūras saīsņu saraksts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Tastatūras saīsnes - -

Šis ir saraksts ar visām tastatūras saīsnēm, kuras var lietot attēlu skatītājā.

- -
- Atvēršana, aizvēršana, saglabāšana un drukāšana - - - - - - - - - - - - - - - - - - - - - - - - - -

Atvērt attēla datni

CtrlO

Saglabāt attēlu ar tādu pašu nosaukumu

CtrlS

Saglabāt atvērtā attēla kopiju ar citu nosaukumu

ShiftCtrlS

Drukāt atvērto attēlu

CtrlP

Aizvērt atvērto logu

CtrlW

Iestatīt attēlu kā darbvirsmas fonu

CtrlF8

-
- -
- Attēlu apskatīšana - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Iet uz iepriekšējo attēlu mapē

Atpakaļatkāpe / Pa kreisi

Iet uz nākamo attēlu mapē

Atstarpes taustiņš / Pa labi

Iet uz pirmo attēlu mapē

AltHome

Iet uz pēdējo attēlu mapē

AltEnd

Izvēlēties nejaušu attēlu mapē

CtrlM

Skatīt attēlu galeriju

F9

Skatīt pilnekrāna režīmā

F11

Skatīt slīdrādi

F5

Patiesais izmērs

Ctrl0 (Nulle)

Labākā saderība

F

Pārvietoties pa lielu attēlu

Altbultiņu taustiņi

-
- -
- Kopēt attēlu ievietošanai citā lietotnē - - - - - -

Kopēt

CtrlC

-
- -
- Mainīt attēla palielinājumu un pagriezt - - - - - - - - - - - - - - - - - -

Tuvināt

+

Tālināt

-

Pagriezt pulksteņrādītāja virzienā

CtrlR

Pagriezt pretēji pulksteņrādītāja virzienam

ShiftCtrlR

-
- -
- Citi - - - - - - - - - - - - - - - - - -

Skatīt sānu paneli

CtrlF9

Skatīt attēla iestatījumus

AltEnter

Atcelt

CtrlZ

Palīdzība

F1

-
- diff -Nru eog-3.26.2/help/lv/slideshow.page eog-3.27.90/help/lv/slideshow.page --- eog-3.26.2/help/lv/slideshow.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - - - Spiediet Slīdrāde, lai mapes visus attēlus rādītu slīdrādes režīmā. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Slīdrāde - -

Lai skatītu mapes visus attēlus kā slīdrādi:

- - - -

Atver vienu no attēliem mapē.

- - -

Spiediet Slīdrāde vai F5.

-

Tiks aktivizēta pilnekrāna slīdrāde. Ik pēc pāris sekundēm tiks rādīts jauns attēls. Ja tu vēlies virzīties pa slīdrādi ātrāk vai atgriezties atpakaļ pie attēla, kurš jau tika parādīts, tu vari izmantot Pa kreisi vai Pa labi bulttaustiņus, lai pašrocīgi virzītos uz priekšu vai atpakaļ.

- - -

Lai izietu no slīdrādes, spied Esc vai F5.

- - - -

Varat mainīt slīdrādes uzstādījumus, piemēram, cik ilgi būtu jārāda katrs attēls. Lai uzzinātu vairāk, lasiet slīdrādes uzstādījumi.

- - diff -Nru eog-3.26.2/help/lv/translate.page eog-3.27.90/help/lv/translate.page --- eog-3.26.2/help/lv/translate.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - LokalizēAttēlu skatītājā! - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Palīdzi tulkot -

Attēlu skatītāja lietotāju saskarni un dokumentāciju tulko brīvprātīgo kopienas visā pasaulē. Tu esi laipni lūgts piedalīties.

-

Ir daudzas valodas, kurām joprojām ir vajadzīgi tulkojumi.

-

Lai sāktu tulkot, jums būs jāizveido konts un jāpievienojas savas valodas tulkošanas komandai. Tad jums būs iespēja augšupielādēt jaunus tulkojumus.

- -

Jūs varat tērzēt ar GNOME tulkotājiem, lietojot IRC. Cilvēki kanālā dzīvo dažādās pasaules valstīs, tāpēc laika zonu atšķirību dēļ var gadīties nesaņemt tūlītēju atbildi.

-

Vai arī varat sazināties ar Internacionalizācijas komandu, aizsūtot e-pastu uz attiecīgo adresātu sarakstu.

- diff -Nru eog-3.26.2/help/lv/view.page eog-3.27.90/help/lv/view.page --- eog-3.26.2/help/lv/view.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - Spied Pa kreisi un Pa labi, lai pāršķirstītu attēlus, vai izmanto attēlu galeriju, lai apskatītu visus attēlus. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0 license.

- - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - -Skatīt mapes visus attēlus - -

Varat veikli pārskatīt kādas mapes visus attēlus, atverot kādu attēlu un tad spiežot pogas Nākamais vai Iepriekšējais attēla labajā un kreisajā pusē. Varat arī skatīt attēlu galeriju ar mapes visu attēlu nelielu priekšskatu.

- -
- Pārlūkot mapes visus attēlus -

Ja tev ir kāda mape, kurā ir vairāki attēli, tu vari ērti pārlūkotvisus attēlus, katru no tiem atsevišķi neverot vaļā.

- - -

Atver jebkuru attēlu no tās mapes, kuru vēlies pārlūkot.

- - -

Spiediet Nākamais un Iepriekšējais kreisajā un labajā attēla pusē, vai spiediet Pa labi un Pa kreisi taustiņus, lai pāršķirtu attēlus.

-

Kā alternatīvu, varat izmantot taustiņus Uz augšu un Uz leju vai Atstarpes taustiņu un Atpakaļatkāpi.

- - -

Varat pārlūkot attēlus pilnekrāna režīmā, spiežot pogu Pa visu ekrānu virsraksta joslā, vai nospiežot F11. Izmantojiet tastatūras taustiņus, lai šķirstītu attēlus pilnekrāna režīmā.

-

Lai atgrieztos ierastajā skatā, nospied Esc vai F11.

- - -
- - - - diff -Nru eog-3.26.2/help/lv/zoom.page eog-3.27.90/help/lv/zoom.page --- eog-3.26.2/help/lv/zoom.page 2017-10-18 19:00:29.000000000 +0000 +++ eog-3.27.90/help/lv/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,48 +0,0 @@ - - - - - - - Palielināt attēlu uz ekrāna. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0 license.

- - - - - Viesturs Ružāns - viesty@exs.lv - 2011. - - - -Tālummaiņa - -

Tu vari pietuvināt vai attālināt attēlu, lai redzētu vairāk vai mazāk no tās. Tas ir noderīgi, ja tu vēlies redzēt lielu attēlu kopumā vai arī tuvāk aplūkot konkrētas detaļas.

- - - -

Tu vari mainīt tuvinājumu, izmantojot peles ritentiņu. Paritini uz augšu, lai pietuvinātu, bet uz leju, lai attālinātu.

- - -

Kā arī tu vari mainīt attālumu, izmantojot virsraksta joslas pogas. Lai pietuvinātu, spied Palielināt attēlu ikonu un, lai attālinātu, spied Samazināt attēlu ikonu. Ikonas izskatās kā "plus" un "mīnus" zīmes.

- - -

Varat arī izmantot tastatūras saīsnes Ctrl+ or Ctrl-.

- - - -

Lai redzētu attēlus to sākotnējā izmērā, izvēlieties 100% tuvinājuma līmeni izkrītošajā izvēlē virsraksta joslā. Varat izmantot arī tastatūras saīsnes Ctrl0 vai 1.

- -
- Pietuvini labākajai saderībai ekrānā -

Varat izvēlēties, ka attēls vienmēr pilnībā ietilpst logā, pat ja maini loga izmēru. Lai to izdarītu, ieslēdziet Labākā saderība izkrītošajā izvēlnē.

-
- diff -Nru eog-3.26.2/help/Makefile.am eog-3.27.90/help/Makefile.am --- eog-3.26.2/help/Makefile.am 2017-11-08 20:33:41.000000000 +0000 +++ eog-3.27.90/help/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ -@YELP_HELP_RULES@ - -HELP_ID = eog - -HELP_MEDIA = \ - figures/eog-logo.png \ - figures/eog-trail.png \ - figures/image-view-prefs.png \ - figures/multiple-convert.png \ - figures/multiple-rename-count.png \ - figures/plugins-all.png \ - figures/plugin-send-by-mail.png \ - figures/prefs-plugins-date.png \ - figures/prefs-plugins-fullscreen.png \ - figures/prefs-plugins.png \ - figures/slideshow-prefs.png - -HELP_FILES = \ - bug-filing.page \ - commandline.page \ - copy-paste.page \ - default.page \ - desktop-background.page \ - develop.page \ - documentation.page \ - edit.page \ - flip-rotate.page \ - format-change.page \ - formats-save.page \ - formats-view.page \ - index.page \ - introduction.page \ - legal.xml \ - license.page \ - open.page \ - plugin-exif-digital.page \ - plugin-fullscreen-background.page \ - plugin-fullscreen-double-click.page \ - plugin-picasa.page \ - plugin-python-console.page \ - plugin-send-by-mail.page \ - plugin-slideshow-shuffle.page \ - plugins.page \ - plugin-zoom-width.page \ - preferences.page \ - print.page \ - rename-multiple.page \ - shortcuts.page \ - slideshow.page \ - translate.page \ - view.page \ - zoom.page - -HELP_LINGUAS = ar ca cs da de el en_GB es eu fi fr gl hu it ja ko lv oc pa pl pt_BR ro ru sl sv te th uk zh_CN zh_TW - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/help/Makefile.in eog-3.27.90/help/Makefile.in --- eog-3.26.2/help/Makefile.in 2017-11-08 20:34:31.000000000 +0000 +++ eog-3.27.90/help/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,568 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = help -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in ChangeLog -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -HELP_ID = eog -HELP_MEDIA = \ - figures/eog-logo.png \ - figures/eog-trail.png \ - figures/image-view-prefs.png \ - figures/multiple-convert.png \ - figures/multiple-rename-count.png \ - figures/plugins-all.png \ - figures/plugin-send-by-mail.png \ - figures/prefs-plugins-date.png \ - figures/prefs-plugins-fullscreen.png \ - figures/prefs-plugins.png \ - figures/slideshow-prefs.png - -HELP_FILES = \ - bug-filing.page \ - commandline.page \ - copy-paste.page \ - default.page \ - desktop-background.page \ - develop.page \ - documentation.page \ - edit.page \ - flip-rotate.page \ - format-change.page \ - formats-save.page \ - formats-view.page \ - index.page \ - introduction.page \ - legal.xml \ - license.page \ - open.page \ - plugin-exif-digital.page \ - plugin-fullscreen-background.page \ - plugin-fullscreen-double-click.page \ - plugin-picasa.page \ - plugin-python-console.page \ - plugin-send-by-mail.page \ - plugin-slideshow-shuffle.page \ - plugins.page \ - plugin-zoom-width.page \ - preferences.page \ - print.page \ - rename-multiple.page \ - shortcuts.page \ - slideshow.page \ - translate.page \ - view.page \ - zoom.page - -HELP_LINGUAS = ar ca cs da de el en_GB es eu fi fr gl hu it ja ko lv oc pa pl pt_BR ro ru sl sv te th uk zh_CN zh_TW -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign help/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign help/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags-am uninstall uninstall-am - -.PRECIOUS: Makefile - -@YELP_HELP_RULES@ - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/help/meson.build eog-3.27.90/help/meson.build --- eog-3.26.2/help/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/help/meson.build 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,57 @@ +sources = [ + 'bug-filing.page', + 'commandline.page', + 'copy-paste.page', + 'default.page', + 'desktop-background.page', + 'develop.page', + 'documentation.page', + 'edit.page', + 'flip-rotate.page', + 'format-change.page', + 'formats-save.page', + 'formats-view.page', + 'index.page', + 'introduction.page', + 'legal.xml', + 'license.page', + 'open.page', + 'plugin-exif-digital.page', + 'plugin-fullscreen-background.page', + 'plugin-fullscreen-double-click.page', + 'plugin-picasa.page', + 'plugin-python-console.page', + 'plugin-send-by-mail.page', + 'plugin-slideshow-shuffle.page', + 'plugins.page', + 'plugin-zoom-width.page', + 'preferences.page', + 'print.page', + 'rename-multiple.page', + 'shortcuts.page', + 'slideshow.page', + 'translate.page', + 'view.page', + 'zoom.page' +] + +media = [ + 'figures/eog-logo.png', + 'figures/eog-trail.png', + 'figures/image-view-prefs.png', + 'figures/multiple-convert.png', + 'figures/multiple-rename-count.png', + 'figures/plugins-all.png', + 'figures/plugin-send-by-mail.png', + 'figures/prefs-plugins-date.png', + 'figures/prefs-plugins-fullscreen.png', + 'figures/prefs-plugins.png', + 'figures/slideshow-prefs.png' +] + +gnome.yelp( + meson.project_name(), + sources: sources, + media: media, + symlink_media: true +) diff -Nru eog-3.26.2/help/oc/bug-filing.page eog-3.27.90/help/oc/bug-filing.page --- eog-3.26.2/help/oc/bug-filing.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/oc/commandline.page eog-3.27.90/help/oc/commandline.page --- eog-3.26.2/help/oc/commandline.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/oc/copy-paste.page eog-3.27.90/help/oc/copy-paste.page --- eog-3.26.2/help/oc/copy-paste.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/oc/default.page eog-3.27.90/help/oc/default.page --- eog-3.26.2/help/oc/default.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/oc/desktop-background.page eog-3.27.90/help/oc/desktop-background.page --- eog-3.26.2/help/oc/desktop-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/oc/develop.page eog-3.27.90/help/oc/develop.page --- eog-3.26.2/help/oc/develop.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/oc/documentation.page eog-3.27.90/help/oc/documentation.page --- eog-3.26.2/help/oc/documentation.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/oc/edit.page eog-3.27.90/help/oc/edit.page --- eog-3.26.2/help/oc/edit.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/oc/flip-rotate.page eog-3.27.90/help/oc/flip-rotate.page --- eog-3.26.2/help/oc/flip-rotate.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/oc/format-change.page eog-3.27.90/help/oc/format-change.page --- eog-3.26.2/help/oc/format-change.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/oc/formats-save.page eog-3.27.90/help/oc/formats-save.page --- eog-3.26.2/help/oc/formats-save.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/oc/formats-view.page eog-3.27.90/help/oc/formats-view.page --- eog-3.26.2/help/oc/formats-view.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - Animacion

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Icòna Windows

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap from the PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/oc/index.page eog-3.27.90/help/oc/index.page --- eog-3.26.2/help/oc/index.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/oc/introduction.page eog-3.27.90/help/oc/introduction.page --- eog-3.26.2/help/oc/introduction.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Introduccion - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/oc/legal.xml eog-3.27.90/help/oc/legal.xml --- eog-3.26.2/help/oc/legal.xml 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/oc/license.page eog-3.27.90/help/oc/license.page --- eog-3.26.2/help/oc/license.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/oc/open.page eog-3.27.90/help/oc/open.page --- eog-3.26.2/help/oc/open.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/oc/plugin-exif-digital.page eog-3.27.90/help/oc/plugin-exif-digital.page --- eog-3.26.2/help/oc/plugin-exif-digital.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/oc/plugin-fullscreen-background.page eog-3.27.90/help/oc/plugin-fullscreen-background.page --- eog-3.26.2/help/oc/plugin-fullscreen-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/oc/plugin-fullscreen-double-click.page eog-3.27.90/help/oc/plugin-fullscreen-double-click.page --- eog-3.26.2/help/oc/plugin-fullscreen-double-click.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/oc/plugin-picasa.page eog-3.27.90/help/oc/plugin-picasa.page --- eog-3.26.2/help/oc/plugin-picasa.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/oc/plugin-python-console.page eog-3.27.90/help/oc/plugin-python-console.page --- eog-3.26.2/help/oc/plugin-python-console.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/oc/plugin-send-by-mail.page eog-3.27.90/help/oc/plugin-send-by-mail.page --- eog-3.26.2/help/oc/plugin-send-by-mail.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/oc/plugin-slideshow-shuffle.page eog-3.27.90/help/oc/plugin-slideshow-shuffle.page --- eog-3.26.2/help/oc/plugin-slideshow-shuffle.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/oc/plugins.page eog-3.27.90/help/oc/plugins.page --- eog-3.26.2/help/oc/plugins.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/oc/plugin-zoom-width.page eog-3.27.90/help/oc/plugin-zoom-width.page --- eog-3.26.2/help/oc/plugin-zoom-width.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/oc/preferences.page eog-3.27.90/help/oc/preferences.page --- eog-3.26.2/help/oc/preferences.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/oc/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Preferéncias -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

Displays any transparent parts of the image in a check pattern.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/oc/print.page eog-3.27.90/help/oc/print.page --- eog-3.26.2/help/oc/print.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/oc/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/oc/rename-multiple.page eog-3.27.90/help/oc/rename-multiple.page --- eog-3.26.2/help/oc/rename-multiple.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/oc/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/oc/shortcuts.page eog-3.27.90/help/oc/shortcuts.page --- eog-3.26.2/help/oc/shortcuts.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/oc/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/oc/slideshow.page eog-3.27.90/help/oc/slideshow.page --- eog-3.26.2/help/oc/slideshow.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/oc/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/oc/translate.page eog-3.27.90/help/oc/translate.page --- eog-3.26.2/help/oc/translate.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/oc/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/oc/view.page eog-3.27.90/help/oc/view.page --- eog-3.26.2/help/oc/view.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/oc/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/oc/zoom.page eog-3.27.90/help/oc/zoom.page --- eog-3.26.2/help/oc/zoom.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/oc/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/pa/bug-filing.page eog-3.27.90/help/pa/bug-filing.page --- eog-3.26.2/help/pa/bug-filing.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/pa/commandline.page eog-3.27.90/help/pa/commandline.page --- eog-3.26.2/help/pa/commandline.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/pa/copy-paste.page eog-3.27.90/help/pa/copy-paste.page --- eog-3.26.2/help/pa/copy-paste.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/pa/default.page eog-3.27.90/help/pa/default.page --- eog-3.26.2/help/pa/default.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/pa/desktop-background.page eog-3.27.90/help/pa/desktop-background.page --- eog-3.26.2/help/pa/desktop-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/pa/develop.page eog-3.27.90/help/pa/develop.page --- eog-3.26.2/help/pa/develop.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/pa/documentation.page eog-3.27.90/help/pa/documentation.page --- eog-3.26.2/help/pa/documentation.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/pa/edit.page eog-3.27.90/help/pa/edit.page --- eog-3.26.2/help/pa/edit.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/pa/flip-rotate.page eog-3.27.90/help/pa/flip-rotate.page --- eog-3.26.2/help/pa/flip-rotate.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/pa/format-change.page eog-3.27.90/help/pa/format-change.page --- eog-3.26.2/help/pa/format-change.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/pa/formats-save.page eog-3.27.90/help/pa/formats-save.page --- eog-3.26.2/help/pa/formats-save.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/pa/formats-view.page eog-3.27.90/help/pa/formats-view.page --- eog-3.26.2/help/pa/formats-view.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - ਐਨੀਮੇਟਡ

 -

BMP - Bitmap

 -

GIF - ਗਰਾਫਿਕਸ ਇੰਟਰਚੇਜ਼ ਫਾਰਮੈਟ

 -

ICO - ਵਿੰਡੋ ਆਈਕਾਨ

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC ਪੇਟ-ਬੁਰਸ਼

 -

PNG - ਪੋਰਟੇਬਲ ਨੈੱਟਵਰਕ ਗਰਾਫਿਕਸ

 -

PNM - ਪੋਰਟੇਬਲ ਐਨੀਮੈਪ ਫਰਾਮ ਦੀ PPM ਟੂਲਕਿੱਟ

 -

RAS - ਸਨ ਰਾਸਟਰ

 -

SVG - ਸਕੇਲੇਬਲ ਵੈਕਟਰ ਗਰਾਫਿਕਸ

 -

TGA - ਟਾਰਗਾ

 -

TIFF - ਟੈਗਡ ਈਮੇਜ ਫਾਇਲ ਫਾਰਮੈਟ

 -

WBMP - ਵਾਇਰਲੈਸ ਬਿੱਟਮੈਪ

 -

XBM - X ਬਿੱਟਮੈਪ

 -

XPM - X ਪਿਕਮੈਪ

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/pa/index.page eog-3.27.90/help/pa/index.page --- eog-3.26.2/help/pa/index.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/pa/introduction.page eog-3.27.90/help/pa/introduction.page --- eog-3.26.2/help/pa/introduction.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -ਜਾਣ ਪਛਾਣ - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/pa/legal.xml eog-3.27.90/help/pa/legal.xml --- eog-3.26.2/help/pa/legal.xml 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/pa/license.page eog-3.27.90/help/pa/license.page --- eog-3.26.2/help/pa/license.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/pa/open.page eog-3.27.90/help/pa/open.page --- eog-3.26.2/help/pa/open.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/pa/plugin-exif-digital.page eog-3.27.90/help/pa/plugin-exif-digital.page --- eog-3.26.2/help/pa/plugin-exif-digital.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/pa/plugin-fullscreen-background.page eog-3.27.90/help/pa/plugin-fullscreen-background.page --- eog-3.26.2/help/pa/plugin-fullscreen-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/pa/plugin-fullscreen-double-click.page eog-3.27.90/help/pa/plugin-fullscreen-double-click.page --- eog-3.26.2/help/pa/plugin-fullscreen-double-click.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/pa/plugin-picasa.page eog-3.27.90/help/pa/plugin-picasa.page --- eog-3.26.2/help/pa/plugin-picasa.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/pa/plugin-python-console.page eog-3.27.90/help/pa/plugin-python-console.page --- eog-3.26.2/help/pa/plugin-python-console.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/pa/plugin-send-by-mail.page eog-3.27.90/help/pa/plugin-send-by-mail.page --- eog-3.26.2/help/pa/plugin-send-by-mail.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/pa/plugin-slideshow-shuffle.page eog-3.27.90/help/pa/plugin-slideshow-shuffle.page --- eog-3.26.2/help/pa/plugin-slideshow-shuffle.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/pa/plugins.page eog-3.27.90/help/pa/plugins.page --- eog-3.26.2/help/pa/plugins.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/pa/plugin-zoom-width.page eog-3.27.90/help/pa/plugin-zoom-width.page --- eog-3.26.2/help/pa/plugin-zoom-width.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/pa/preferences.page eog-3.27.90/help/pa/preferences.page --- eog-3.26.2/help/pa/preferences.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -ਮੇਰੀ ਪਸੰਦ -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

ਚਿੱਤਰ ਦੇ ਕਿਸੇ ਵੀ ਪਾਰਦਰਸ਼ੀ ਭਾਗ ਨੂੰ ਇੱਕ ਡੱਬੀਦਾਰ ਪੈਟਰਨ 'ਚ ਵੇਖਾਉਦੀ ਹੈ।

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/pa/print.page eog-3.27.90/help/pa/print.page --- eog-3.26.2/help/pa/print.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pa/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/pa/rename-multiple.page eog-3.27.90/help/pa/rename-multiple.page --- eog-3.26.2/help/pa/rename-multiple.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pa/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/pa/shortcuts.page eog-3.27.90/help/pa/shortcuts.page --- eog-3.26.2/help/pa/shortcuts.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pa/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/pa/slideshow.page eog-3.27.90/help/pa/slideshow.page --- eog-3.26.2/help/pa/slideshow.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pa/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -ਸਲਾਇਡ ਸ਼ੋ - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/pa/translate.page eog-3.27.90/help/pa/translate.page --- eog-3.26.2/help/pa/translate.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pa/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/pa/view.page eog-3.27.90/help/pa/view.page --- eog-3.26.2/help/pa/view.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pa/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/pa/zoom.page eog-3.27.90/help/pa/zoom.page --- eog-3.26.2/help/pa/zoom.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pa/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/pl/bug-filing.page eog-3.27.90/help/pl/bug-filing.page --- eog-3.26.2/help/pl/bug-filing.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,39 +0,0 @@ - - - - - - Zgłaszanie błędów w Przeglądarce obrazów. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Zgłaszanie problemów z przeglądarką obrazów -

Przeglądarka obrazów jest tworzona przez społeczność ochotników. Zapraszamy do współpracy.

- -

Jeśli występują problemy z przeglądarką obrazów (na przykład jeśli zawiesza się lub dziwnie zachowuje) lub brakuje jakiejś funkcji, to prosimy to zgłosić na stronie (w języku angielskim). Zgłoszenia błędów to metoda śledzenia stanu problemów podczas ich naprawiania.

-

Do wzięcia udziału potrzebne jest konto, dające możliwość zgłaszania błędów i pisania komentarzy. Rejestracja umożliwia także otrzymywanie powiadomień pocztą e-mail o stanie błędu. Jeśli nie masz jeszcze konta, to kliknij odnośnik New Account (Nowe konto).

-

Po utworzeniu konta zaloguj się i kliknij File a BugCoreeog (Zgłoś błądGłówneeog). Przed zgłoszeniem błędu prosimy przeczytać wytyczne opisywania błędów i poszukać, czy błąd został już zgłoszony.

-

Aby zgłosić błąd, wybierz składnik w menu Component (Składnik). Jeśli nie ma pewności, którego składnika błąd dotyczy, to wybierz general (ogólne).

-

W przypadku prośby o nową funkcję wybierz enhancement (ulepszenie) w menu Severity (Ciężkość). Wypełnij sekcje „Summary” (Podsumowanie) i „Description” (Opis) w języku angielskim i kliknij przycisk Submit Bug (Wyślij).

-

Zgłoszenie otrzyma numer identyfikujący, a jego stan będzie zmieniany razem z postępem jego rozwiązywania. Może to trochę potrwać, a programiści mogą prosić o podanie dodatkowych informacji, które mogą im pomóc.

- diff -Nru eog-3.26.2/help/pl/commandline.page eog-3.27.90/help/pl/commandline.page --- eog-3.26.2/help/pl/commandline.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,61 +0,0 @@ - - - - - - Wiersz poleceń - Polecenie eog może otwierać dowolną liczbę obrazów w różnych trybach. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Wiersz poleceń - -

Aby uruchomić Przeglądarkę obrazów w Terminalu, wpisz polecenie eog.

-

Można otworzyć konkretny plik wpisując jego nazwę po poleceniu eog:

-eog obraz.jpeg -

Można otworzyć konkretny katalog wpisując jego nazwę po poleceniu eog:

-eog katalog -

Można przeglądać galerię obrazów, aby wyświetlić wszystkie obrazy w katalogu jednocześnie.

- -
- Otwarcie obrazu na pełnym ekranie - eog --fullscreen obraz.jpeg -
- -
- Otwarcie obrazu w nowym oknie - eog --new-instance obraz.jpeg -
-
- Otwarcie katalogu jako pokaz slajdów - eog --slide-show Obrazy/ -
- diff -Nru eog-3.26.2/help/pl/copy-paste.page eog-3.27.90/help/pl/copy-paste.page --- eog-3.26.2/help/pl/copy-paste.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,42 +0,0 @@ - - - - - - - - Jak kopiować/wklejać z przeglądarki obrazów do innego programu. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Kopiowanie i wklejanie obrazu -

Aby skopiować obraz z przeglądarki obrazów do innego programu, kliknij obraz prawym przyciskiem myszy i wybierz Skopiuj.

- -

Obraz został skopiowany do schowka i można go teraz wkleić do dokumentu LibreOffice, obrazu GIMP lub innego programu.

- - diff -Nru eog-3.26.2/help/pl/default.page eog-3.27.90/help/pl/default.page --- eog-3.26.2/help/pl/default.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - - Ustawianie przeglądarki obrazów jako domyślnego programu do wyświetlania obrazów. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Domyślne otwieranie obrazów w przeglądarce obrazów -

Aby ustawić przeglądarkę obrazów jako domyślny program otwierający pewne typy plików obrazów:

- - - -

W Menedżerze plików kliknij plik prawym przyciskiem myszy i wybierz Właściwości.

- - -

Przejdź do karty Otwieranie. Zostanie wyświetlona lista Polecane programy.

- - -

Wybierz Przeglądarkę obrazów i kliknij przycisk Ustaw jako domyślny.

-

Jeśli na liście Polecane programy nie ma Przeglądarki obrazów, to kliknij Wyświetl inne programy. Wybierz Przeglądarkę obrazów z wyświetlonej listy i kliknij przycisk Ustaw jako domyślny.

- - -

Kliknij przycisk Zamknij.

- - - -

W przyszłości podwójne kliknięcie pliku o tym samym typie otworzy go w przeglądarce obrazów.

- - diff -Nru eog-3.26.2/help/pl/desktop-background.page eog-3.27.90/help/pl/desktop-background.page --- eog-3.26.2/help/pl/desktop-background.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Ustawianie ulubionego obrazu jako tło/tapetę pulpitu. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Ustawienie obecnego obrazu jako tło pulpitu -

Aby ustawić obecnie wyświetlany obraz jako obraz tła na pulpicie, kliknij Ustaw jako tapetę.

- -

Spowoduje to zmianę tła na obecnie wyświetlany obraz. Użytkownik zostanie zapytany, czy zmodyfikować wygląd obrazu w oknie preferencji Tło. Komunikat zniknie po kliknięciu przycisku Ukryj.

- diff -Nru eog-3.26.2/help/pl/develop.page eog-3.27.90/help/pl/develop.page --- eog-3.26.2/help/pl/develop.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - - Ulepszanie Przeglądarki obrazów - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Pomoc w programowaniu -

Przeglądarka obrazów jest tworzona przez społeczność ochotników. Zapraszamy do współpracy.

-

Jeśli chcesz pomóc rozwijać Przeglądarkę obrazów, to możesz skontaktować się z programistami za pomocą sieci IRC lub przez listę pocztową (w języku angielskim).

- - diff -Nru eog-3.26.2/help/pl/documentation.page eog-3.27.90/help/pl/documentation.page --- eog-3.26.2/help/pl/documentation.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - Dołączenie do zespołu dokumentacji. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Pomoc w pisaniu dokumentacji - -

Pomoc użytkownika Przeglądarki obrazów jest tworzona przez społeczność ochotników. Zapraszamy do współpracy.

- -

Jeśli chcesz wziąć udział w projekcie dokumentacji, to skontaktuj się z nami za pomocą sieci IRC lub przez listę pocztową (w języku angielskim).

-

Nasza wiki zawiera przydatne informacje (w języku angielskim).

- - - diff -Nru eog-3.26.2/help/pl/edit.page eog-3.27.90/help/pl/edit.page --- eog-3.26.2/help/pl/edit.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,59 +0,0 @@ - - - - - - Kliknij Otwórz za pomocą, aby zmodyfikować obraz w zewnętrznym edytorze obrazów. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - -Modyfikowanie lub usuwanie obrazu - -
Modyfikacja obrazu -

Przeglądarka obrazów może tylko wyświetlać obrazy — nie może ich modyfikować. W celu należy używać programu do modyfikowania obrazów, takiego jak edytor GIMP. Aby otworzyć obraz do modyfikacji w innym programie:

- - -

Kliknij Otwórz za pomocą lub kliknij obraz prawym przyciskiem myszy.

- - -

Wybierz program, w którym zmodyfikować obraz.

- - -

Po ukończeniu modyfikowania zapisz obraz i zamknij drugi program.

- - -

Przeglądarka obrazów wykryje, że obraz został zmieniony i wczyta go ponowie.

- - -
- -
-Usuwanie obrazu -

Aby usunąć niechciany obraz, kliknij go prawym przyciskiem myszy i wybierz Przenieś do kosza.

-
- - diff -Nru eog-3.26.2/help/pl/flip-rotate.page eog-3.27.90/help/pl/flip-rotate.page --- eog-3.26.2/help/pl/flip-rotate.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,73 +0,0 @@ - - - - - - Poziomo/pionowo, w prawo/w lewo - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Odwracanie i obracanie obrazów - -

Jeśli obrazy są do góry nogami lub tyłem do przodu, to można je odwrócić lub obrócić, aby wyglądały poprawnie.

- - -
-Odwracanie obrazu - -

Kliknij Modyfikuj.

 -

Wybierz Odwróć poziomo lub Odwróć pionowo.

 - -

Aby zachować odwrócony obraz, kliknij Zapisz.

-

Można nie zapisać obrazu, a powróci on do swojej oryginalnej orientacji przy następnym otwarciu.

- - -
- -
-Obracanie obrazu - -

Najedź kursorem na obraz. Na dole pojawią się dwa przyciski ze strzałkami.

 -

Kliknij Obróć obraz o 90 stopni w lewo lub Obróć obraz o 90 stopni w prawo.

 - -

Aby zachować obrócony obraz, kliknij Zapisz.

-

Można nie zapisać obrazu, a powróci on do swojej oryginalnej orientacji przy następnym otwarciu.

- - - -

Można także używać skrótów klawiszowych:

- - - - - - - - - - -

Obrót w prawo

CtrlR

Obrót w lewo

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/pl/format-change.page eog-3.27.90/help/pl/format-change.page --- eog-3.26.2/help/pl/format-change.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,82 +0,0 @@ - - - - - - Można konwertować obrazy z jednego formatu na inny. Można to zrobić na wielu obrazach jednocześnie. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Konwersja na inny format pliku - -

Obrazy są zapisywane w jednym z formatów plików, takich jak JPEG lub PNG. Można konwertować z jednego formatu na inny.

- -
- Konwersja jednego obrazu na inny format pliku - - -

Kliknij Zapisz jako…. Zostanie otwarte okno Zapis obrazu.

- - -

W polu nazwy zmień rozszerzenie pliku na format, do którego konwertować obraz. Rozszerzenie jest częścią nazwy pliku po kropce.

-

Na przykład, aby konwertować plik JPEG (.jpg) na plik mapy bitowej (.bmp):

-

oryginalny plik: obraz.jpg

-

nowy plik: obraz.bmp

- - -

Kliknij przycisk Zapisz, a nowy plik zostanie zapisany w nowym formacie. Poprzedni plik (w poprzednim formacie) zostanie na swoim miejscu i nie zostanie usunięty.

- - - -

Przeglądarka obrazów próbuje wykryć format docelowy na podstawie wybranego rozszerzenia pliku. Jeśli wpisane rozszerzenie nie jest wykrywane lub nie wiadomo, którego użyć, kliknij Obsługiwane pliki obrazów w oknie Zapis obrazu. Umożliwi to wybór formatu pliku z rozwijanego menu.

- -
- -
- Konwersja wielu obrazów na inny format -

Można konwertować kilka obrazów z jednego formatu pliku na drugi jednocześnie. Jest to przydatne, jeśli wiele obrazów wymaga konwersji.

- - -

W galerii obrazów wciśnij i przytrzymaj klawisz Ctrl i kliknij obrazy do konwersji. Można także nacisnąć klawisze CtrlA, aby zaznaczyć wszystkie obrazy.

- - -

Kliknij Zapisz jako…. Zostanie wyświetlone okno widoczne poniżej.

- - - -

Obrazy po konwersji będą domyślnie zapisywane w obecnym katalogu. Aby zapisywać je w innym miejscu, zmień Katalog docelowy.

- - -

Wybierz format pliku, do którego konwertować obrazy z rozwijanej listy po prawej stronie pola Format nazwy pliku.

- - -

Kliknij przycisk Zapisz.

- - -
- - diff -Nru eog-3.26.2/help/pl/formats-save.page eog-3.27.90/help/pl/formats-save.page --- eog-3.26.2/help/pl/formats-save.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - JPEG, PNG, BMP i inne. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - - Formaty obsługiwane podczas zapisywania obrazów -

Przeglądarka obrazów może zapisywać obrazy w tych formatach plików:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

W zależności od konfiguracji systemu możliwe jest zapisywanie innych formatów obrazów.

 - diff -Nru eog-3.26.2/help/pl/formats-view.page eog-3.27.90/help/pl/formats-view.page --- eog-3.26.2/help/pl/formats-view.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,52 +0,0 @@ - - - - - - - Przeglądarka obrazów może wyświetlać obrazy w wielu formatach, w tym PNG, JPEG i TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - - Obsługiwane formaty obrazów - -

Przeglądarka obrazów może otwierać obrazy w tych formatach:

- -

ANI — animacje

 -

BMP — bitmapy

 -

GIF — animowane koty

 -

ICO — ikony systemu Windows

 -

JPEG/JPG — zdjęcia

 -

PCX — „PC Paintbrush”

 -

PNG — obrazy w Internecie

 -

PNM — obrazy zestawu narzędzi PPM

 -

RAS — rastrowa grafika firmy Sun

 -

SVG — grafika wektorowa

 -

TGA — Targa

 -

TIFF — obrazy wielostronicowe

 -

WBMP — bitmapy bezprzewodowe

 -

XBM — bitmapy systemu X

 -

XPM — piksmapy systemu X

 - -

Próba otwarcia obrazu w nieobsługiwanym formacie spowoduje wyświetlenie błędu Nie można wczytać obrazu „nazwa obrazu”.

- diff -Nru eog-3.26.2/help/pl/index.page eog-3.27.90/help/pl/index.page --- eog-3.26.2/help/pl/index.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - Pomoc przeglądarki obrazów Eye of GNOME. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Przeglądarka obrazów Eye of GNOME - Przeglądarka obrazów Eye of GNOME - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> Przeglądarka obrazów Eye of GNOME -
- Wyświetlanie obrazów -
- -
- Modyfikowanie obrazów -
- -
- Drukowanie obrazów -
- -
- Dodatkowe funkcje - -
-
- Zaawansowane -
- -
- Często zadawane pytania -
- -
- Wskazówki -
- -
- Dołącz do nas -
- diff -Nru eog-3.26.2/help/pl/introduction.page eog-3.27.90/help/pl/introduction.page --- eog-3.26.2/help/pl/introduction.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Witamy w Przeglądarce obrazów Eye of GNOME. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Wprowadzenie - -

Eye of GNOME to przeglądarka obrazów. Za jej pomocą można wyświetlać obrazy prawie każdego typu. Obsługuje duże kolekcje obrazów i może wyświetlać pokaz slajdów. Można także wykonywać podstawowe działania na obrazach, takie jak obracanie i odwracanie czy konwertowanie na inny format plików.

- - diff -Nru eog-3.26.2/help/pl/legal.xml eog-3.27.90/help/pl/legal.xml --- eog-3.26.2/help/pl/legal.xml 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Na warunkach licencji Creative Commons Attribution-Share Alike 3.0 United States.

-

W drodze specjalnego wyjątku posiadacze praw autorskich udzielają pozwolenia na kopiowanie, modyfikowanie i rozprowadzanie przykładowego kodu zawartego w tej dokumentacji na dowolnych warunkach, bez ograniczeń.

- diff -Nru eog-3.26.2/help/pl/license.page eog-3.27.90/help/pl/license.page --- eog-3.26.2/help/pl/license.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - - Informacje prawne. - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - - Licencja -

Na warunkach licencji Creative Commons Attribution-Share Alike 3.0 Unported.

-

Można:

- - - <em>dzielić się</em> -

, czyli kopiować, rozpowszechniać, odtwarzać i wykonywać utwór.

- - - <em>remiksować</em> -

, czyli tworzyć utwory zależne.

- - -

Na następujących warunkach:

- - - <em>Uznanie autorstwa</em> -

Utwór należy oznaczyć w sposób określony przez Twórcę lub Licencjodawcę.

- - - <em>Na tych samych warunkach</em> -

Zmieniając utwór, przekształcając go lub tworząc na jego podstawie, wolno rozpowszechniać powstały utwór zależny jedynie na tej samej, podobnej lub zgodnej licencji.

- - -

Pełny tekst licencji dostępny jest na stronie Creative Commons; można również przeczytać podsumowanie.

- diff -Nru eog-3.26.2/help/pl/open.page eog-3.27.90/help/pl/open.page --- eog-3.26.2/help/pl/open.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - Obrazy otwierają się w nowym oknie. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - - -Otwieranie obrazu - -

Obrazy powinny automatycznie otwierać się w przeglądarce obrazów po podwójnym kliknięciu ich w Menedżerze plików. Jeśli tak się nie dzieje, należy ustawić przeglądarkę obrazów domyślnym programem do wyświetlania obrazów.

- -

Każdy podwójnie kliknięty obraz domyślnie jest otwierany w nowym oknie przeglądarki obrazów, ale można też przeglądać wiele obrazów w jednym oknie.

- -

Można także otwierać obrazy w przeglądarce obrazów:

- -

Kliknij Otwórz… (lub naciśnij klawisze CtrlO). Zostanie otwarte okno Otwarcie obrazu.

 -

Wybierz obraz do otwarcia i kliknij przycisk Otwórz.

 - - - diff -Nru eog-3.26.2/help/pl/pl.po eog-3.27.90/help/pl/pl.po --- eog-3.26.2/help/pl/pl.po 2017-11-08 19:35:40.000000000 +0000 +++ eog-3.27.90/help/pl/pl.po 2018-02-12 20:46:58.000000000 +0000 @@ -1,14 +1,14 @@ # Polish translation for eog help. -# Copyright © 2017 the eog authors. -# This file is distributed under the same license as the eog package. -# Piotr Drąg , 2017. -# Aviary.pl , 2017. +# Copyright © 2017-2018 the eog authors. +# This file is distributed under the same license as the eog help. +# Piotr Drąg , 2017-2018. +# Aviary.pl , 2017-2018. # msgid "" msgstr "" "Project-Id-Version: eog-help\n" -"POT-Creation-Date: 2017-10-21 12:29+0000\n" -"PO-Revision-Date: 2017-10-26 02:49+0200\n" +"POT-Creation-Date: 2018-02-04 23:42+0000\n" +"PO-Revision-Date: 2018-02-04 00:40+0100\n" "Last-Translator: Piotr Drąg \n" "Language-Team: Polish \n" "Language: pl\n" @@ -22,8 +22,8 @@ msgctxt "_" msgid "translator-credits" msgstr "" -"Piotr Drąg , 2017\n" -"Aviary.pl , 2017" +"Piotr Drąg , 2017-2018\n" +"Aviary.pl , 2017-2018" #. (itstool) path: info/desc #: C/bug-filing.page:7 @@ -2522,8 +2522,8 @@ #. (itstool) path: td/p #: C/shortcuts.page:80 -msgid "F9" -msgstr "F9" +msgid "CtrlF9" +msgstr "CtrlF9" #. (itstool) path: td/p #: C/shortcuts.page:83 @@ -2642,8 +2642,8 @@ #. (itstool) path: td/p #: C/shortcuts.page:143 -msgid "CtrlF9" -msgstr "CtrlF9" +msgid "F9" +msgstr "F9" #. (itstool) path: td/p #: C/shortcuts.page:146 @@ -2915,10 +2915,11 @@ #: C/view.page:56 msgid "" "To show the image gallery, click Image Gallery, or press F9." +"gui>, or press CtrlF9." msgstr "" "Aby wyświetlić galerię obrazów, kliknij Galeria " -"obrazów lub naciśnij klawisz F9." +"obrazów lub naciśnij klawisze CtrlF9." #. (itstool) path: item/p #: C/view.page:60 @@ -2938,10 +2939,11 @@ #: C/view.page:65 msgid "" "To hide the gallery, click Image Gallery " -"again, or press F9." +"again, or press CtrlF9." msgstr "" "Aby ukryć galerię, kliknij Galeria obrazów " -"jeszcze raz lub naciśnij klawisz F9." +"jeszcze raz lub naciśnij klawisze CtrlF9." #. (itstool) path: info/desc #: C/zoom.page:8 diff -Nru eog-3.26.2/help/pl/plugin-exif-digital.page eog-3.27.90/help/pl/plugin-exif-digital.page --- eog-3.26.2/help/pl/plugin-exif-digital.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,87 +0,0 @@ - - - - - - Wyświetlanie informacji, takich jak ustawienia aparatu i histogram, geolokalizacja i data. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Wyświetlanie szczegółowych informacji o obrazie - -

Zdjęcia wykonane aparatem cyfrowym są przechowywane z wieloma dodatkowymi informacjami osadzonymi w plikach, takimi jak data wykonania, użyte ustawienia ekspozycji oraz, w niektórych przypadkach, nawet miejsce wykonania zdjęcia.

- -

Ten temat wyjaśnia, jak wyświetlić te informacje.

- -
-Wyświetlanie daty na pasku stanu - -

Można wyświetlać datę wykonania zdjęcia na pasku stanu na dole okna.

-

Aby to zrobić, otwórz menu programu na górnym pasku, kliknij Preferencje i przejdź do karty Wtyczki. Następnie zaznacz opcję Data na pasku stanu.

-
- -
- Szczegółowe dane Exif -

Szczegółowe informacje przechowywane w zdjęciach cyfrowych nazywają się Exif. Można je wyświetlić instalując wtyczkę dla przeglądarki obrazów.

- - - -

Aby włączyć tę funkcję, należy zainstalować pakiet eog-plugins.

- - -

Jeśli pakiet eog-plugins jest zainstalowany, to otwórz menu programu na górnym pasku i kliknij Preferencje. Następnie zaznacz Wyświetlanie danych Exif i zamknij okno.

- - -

Włącz Panel boczny, aby wyświetlić ustawienia aparatu użyte do wykonania zdjęcia. Aby wyświetlić także histogramy zawierające balans kolorów i światło/cień zdjęcia, zaznacz Wyświetlanie danych Exif w karcie Wtyczki i kliknij przycisk Preferencje. Zaznacz histogramy do wyświetlenia pod napisem Histogram.

- - -

Można także wyświetlić na pasku stanu ustawienia aparatu użyte do wykonania zdjęcia. Zaznacz Wyświetlanie danych Exif w karcie Wtyczki i kliknij przycisk Preferencje. Zaznacz opcję Wyświetlanie ustawień aparatu na pasku stanu.

- - -
- -
- Wyświetlanie mapy z położeniem zdjęcia -

Część aparatów może dołączać informacje o geolokalizacji (geotagi) do zdjęć cyfrowych. Geotagi to zwykle po prostu współrzędne GPS (szerokość i długość geograficzna) miejsca, w którym zdjęcie zostało wykonane.

- - - -

Aby włączyć tę funkcję, należy zainstalować pakiet eog-plugins.

- - -

Jeśli pakiet eog-plugins jest zainstalowany, to otwórz menu programu na górnym pasku i kliknij Preferencje i przejdź do karty Wtyczki. Następnie zaznacz Mapa i zamknij okno.

- - -

Włącz Panel boczny, aby wyświetlić mapę.

- - -

Mapa wyświetli miejsce wykonania zdjęcia tylko, jeśli dołączono do niego informacje o geolokalizacji. Wiele aparatów tego nie robi.

-
- - - diff -Nru eog-3.26.2/help/pl/plugin-fullscreen-background.page eog-3.27.90/help/pl/plugin-fullscreen-background.page --- eog-3.26.2/help/pl/plugin-fullscreen-background.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - Włącza zmienianie koloru tła w trybie pełnoekranowym. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Zmiana koloru tła pełnego ekranu - -

Można zmienić kolor tła w trybie pełnoekranowym.

- -

Aby to zrobić, otwórz menu programu na górnym pasku, kliknij Preferencje i przejdź do karty Wtyczki. Następnie zaznacz Tło pełnego ekranu i kliknij przycisk Preferencje. Wybierz kolor dla trybu pełnoekranowego i zamknij okno.

- -

Od teraz wybrany kolor tła będzie używany w trybie pełnoekranowym.

- -

Aby włączyć tę funkcję, należy zainstalować pakiet eog-plugins.

- - diff -Nru eog-3.26.2/help/pl/plugin-fullscreen-double-click.page eog-3.27.90/help/pl/plugin-fullscreen-double-click.page --- eog-3.26.2/help/pl/plugin-fullscreen-double-click.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - Włączanie trybu pełnoekranowego przed podwójne kliknięcie obrazu. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Pełny ekran za pomocą podwójnego kliknięcia - - - -

Można ustawić wyświetlanie obrazów na pełnym ekranie po podwójnym kliknięciu ich w przeglądarce obrazów.

- -

Aby to zrobić, otwórz menu programu na górnym pasku, kliknij Preferencje i przejdź do karty Wtyczki. Następnie zaznacz Pełny ekran za pomocą podwójnego kliknięcia i zamknij okno.

- -

Od teraz podwójne kliknięcie obrazu przełączy między pełnym ekranem a zwykłym oknem.

- - diff -Nru eog-3.26.2/help/pl/plugin-picasa.page eog-3.27.90/help/pl/plugin-picasa.page --- eog-3.26.2/help/pl/plugin-picasa.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - Łatwe wysyłanie obrazów do serwisu PicasaWeb bezpośrednio z przeglądarki obrazów. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Wysyłanie zdjęć do serwisu <app>Picasa Web</app> - -

Picasa Web to serwis umożliwiający udostępnianie obrazów innym osobom w Internecie. Można dodać przycisk skrótu zapewniający wygodny sposób wysyłania obrazów do serwisu.

- -

Aby to zrobić, otwórz menu programu na górnym pasku, kliknij Preferencje, przejdź do karty Wtyczki i zaznacz Wysyłanie do serwisu Picasa Web.

-

Doda to wygodne menu Wyślij do serwisu PicasaWeb.

- -

Aby włączyć tę funkcję, należy zainstalować pakiet eog-plugins.

- - diff -Nru eog-3.26.2/help/pl/plugin-python-console.page eog-3.27.90/help/pl/plugin-python-console.page --- eog-3.26.2/help/pl/plugin-python-console.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Można używać konsoli języka Python, aby dodawać dodatkowe funkcje i wykonywać skrypty w przeglądarce obrazów. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Konsola języka Python - -

Przeglądarka obrazów ma system wtyczek, który używa języka skryptowego Python. Włączenie konsoli języka Python daje bezpośredni dostęp do interpretera języka Python z poziomu przeglądarki obrazów, co umożliwia na przykład pisanie skryptów i programistyczne manipulowanie obrazami.

- - - -

Aby włączyć tę funkcję, należy zainstalować pakiet eog-plugins.

- - -

Po zainstalowaniu pakietu eog-plugins otwórz menu programu na górnym pasku, kliknij Preferencje i przejdź do karty Wtyczki.

- - -

Zaznacz Konsola języka Python i kliknij przycisk Zamknij.

- - -

Kliknij menu Konsola języka Python, aby wywołać konsolę.

- - - - diff -Nru eog-3.26.2/help/pl/plugin-send-by-mail.page eog-3.27.90/help/pl/plugin-send-by-mail.page --- eog-3.26.2/help/pl/plugin-send-by-mail.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - Łatwe wysyłanie obrazów załączając je do nowej wiadomości e-mail. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Wysyłanie obrazów pocztą - -

Można dodać przycisk zapewniający wygodny sposób wysyłania obrazów do innych osób pocztą.

- -

Aby to zrobić, otwórz menu programu na górnym pasku, kliknij Preferencje i przejdź do karty Wtyczki. Następnie zaznacz Wysyłanie pocztą i kliknij przycisk Zamknij. Doda to menu Wyślij pocztą.

- -

Aby włączyć tę funkcję, należy zainstalować pakiet eog-plugins.

- - -

Aby to działało, konto e-mail musi być ustawione w kliencie poczty Evolution.

- - - - - diff -Nru eog-3.26.2/help/pl/plugin-slideshow-shuffle.page eog-3.27.90/help/pl/plugin-slideshow-shuffle.page --- eog-3.26.2/help/pl/plugin-slideshow-shuffle.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - - Wyświetlanie zdjęć w losowej kolejności podczas pokazu slajdów. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Tryb losowy pokazu slajdów - -

Można ustawić losową kolejność obrazów podczas pokazu slajdów.

- -

Aby to zrobić, otwórz menu programu na górnym pasku, kliknij Preferencje i przejdź do karty Wtyczki. Następnie zaznacz Tryb losowy pokazu slajdów i zamknij okno.

- -

Aby włączyć tę funkcję, należy zainstalować pakiet eog-plugins.

- - diff -Nru eog-3.26.2/help/pl/plugins.page eog-3.27.90/help/pl/plugins.page --- eog-3.26.2/help/pl/plugins.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,88 +0,0 @@ - - - - - - Instalacja wtyczek z dodatkowymi funkcjami. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Wtyczki - -

Można zainstalować pakiet eog-plugins, aby dodać więcej wtyczek do przeglądarki obrazów. Wtyczki zawierają dodatkowe funkcje, takie jak te wymienione poniżej.

- - -

Można zainstalować pakiet eog-plugins za pomocą menedżera pakietów używanej dystrybucji systemu Linux.

- - - -

Zainstaluj „eog-plugins”

- - - - -

Pakiet eog-plugins zawiera te funkcje:

- - - -

Data na pasku stanu: wyświetla datę obrazu na pasku stanu okna.

- - -

Wyświetlanie danych Exif: wyświetla ustawienia aparatu i histogram zdjęć cyfrowych.

- - -

Tło pełnego ekranu: umożliwia zmianę tła w trybie pełnoekranowym.

- - -

Pełny ekran za pomocą podwójnego kliknięcia: włączanie trybu pełnoekranowego za pomocą podwójnego kliknięcia myszą.

- - -

Mapa: wyświetlanie miejsca wykonania zdjęcia cyfrowego na mapie.

- - -

Wysyłanie do serwisu Picasa Web: wysyłanie obrazów do serwisu Picasa Web.

- - -

Konsola języka Python: konsola skryptów języka Python dla przeglądarki obrazów.

- - -

Wysyłanie pocztą: wysyłanie obrazu do znajomego załączając go do nowej wiadomości e-mail.

- - -

Tryb losowy pokazu slajdów: losuje obrazy w trybie pokazu slajdów.

- - -

Przybliżanie obrazów, aby dopasować szerokość: dostosowuje przybliżenie, aby dopasować szerokość obrazu do okna.

- - - - -

Można zarządzać wtyczkami za pomocą karty Wtyczki okna preferencji.

- - - diff -Nru eog-3.26.2/help/pl/plugin-zoom-width.page eog-3.27.90/help/pl/plugin-zoom-width.page --- eog-3.26.2/help/pl/plugin-zoom-width.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,39 +0,0 @@ - - - - - - Dostosowanie przybliżenia, aby dopasować szerokość obrazu do okna. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Przybliżanie obrazów, aby dopasować szerokość - -

Włączenie wtyczki Przybliżanie obrazów, aby dopasować szerokość spowoduje rozszerzanie obrazów tak, aby wypełniały pełną szerokość okna.

- -

Aby to zrobić, otwórz menu programu na górnym pasku, kliknij Preferencje i przejdź do karty Wtyczki. Następnie zaznacz Przybliżanie obrazów, aby dopasować szerokość i zamknij okno.

- -

Dla tej funkcji wymagana jest instalacja pakietu eog-plugins.

- - diff -Nru eog-3.26.2/help/pl/preferences.page eog-3.27.90/help/pl/preferences.page --- eog-3.26.2/help/pl/preferences.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,97 +0,0 @@ - - - - - - Wyświetlanie obrazu, pokaz slajdów and wtyczki. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Preferencje -

Ten temat wyjaśnia wszystkie ustawienia, które można zmienić w przeglądarce obrazów. Otwórz menu programu na górnym pasku i kliknij Preferencje, aby zacząć zmieniać preferencje.

- - - -
-Preferencje wyświetlania obrazu - - - - Ulepszenia obrazu -

Zaznacz opcję Interpolacja obrazu przy pomniejszaniu, aby włączyć wygładzanie obrazów podczas powiększania i pomniejszania. Sprawia to, że obrazy w niskiej rozdzielczości wyglądają lepiej dzięki wygładzaniu krawędzi.

-

Włączenie opcji Orientacja automatyczna sprawi, że obrazy będą automatycznie obracane zgodnie z metadanymi Exif. Są to dane o obrazie, automatycznie wstawiane przez aparat cyfrowy, które mogą zawierać informację o ułożeniu aparatu podczas wykonywania zdjęcia. Na przykład, kiedy automatyczna orientacja jest włączona, pionowe zdjęcia są automatycznie obracane do góry. Obrót nie jest zapisywany do czasu zapisania obróconego obrazu.

-

Orientacja automatyczna nie działa ze wszystkimi obrazami. Tylko zdjęcia wykonane za pomocą aparatu zapisującego metadane orientacji Exif będą obracane.

- - - Części przezroczyste -

Zaznacz jedną z poniższych opcji, aby ustawić sposób wyświetlania przezroczystych części obrazów:

- - -

Wzór szachownicy:

-

Wyświetla przezroczyste części obrazu jako wzór szachownicy.

- - -

Inny kolor:

-

Wyświetla przezroczyste części obrazu jako jeden kolor, który można ustawić klikając przycisk wyboru koloru.

- - -

Tło:

-

Wyświetla przezroczyste części obrazu jako kolor tła, jeśli zaznaczono Inny kolor pod Tło. W przeciwnym wypadku używany jest domyślny kolor tła.

- - - - -
- - -
-Preferencje pokazu slajdów - -

Aby dostosować ustawienia pokazu slajdów:

- - -

Pod Skalowanie obrazu można wybrać, czy powiększać obrazy mniejsze od ekranu.

- - -

Pod Sekwencja można wybrać, przez ile sekund obraz jest wyświetlany (między 1 a 100) przez wyświetleniem następnego.

- - -

Zaznacz opcję Zapętlanie, aby pokaz slajdów był powtarzany bez przerwy. Jeśli nie jest zaznaczona, pokaz slajdów zacznie się wybranym obrazem, a zakończy ostatnim obrazem w katalogu.

- - -
- - -
-Preferencje wtyczek - - - - -

Tutaj można włączyć/wyłączyć dodatkowe funkcje. Ilustracja po lewej pokazuje domyślnie dostępne wtyczki.

- -

Można także zainstalować pakiet eog-plugins, zawierający wtyczki dostarczające liczne dodatkowe funkcje. Po jego instalacji można włączyć dodatkowe wtyczki, takie jak te pokazane na ilustracji po prawej.

-
- - diff -Nru eog-3.26.2/help/pl/print.page eog-3.27.90/help/pl/print.page --- eog-3.26.2/help/pl/print.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - - Kliknij Wydrukuj…, a następnie użyj kart, aby zmienić ustawienia wydruku. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Drukowanie obrazu - -

Aby wydrukować obecnie otwarty obraz:

- - - -

Kliknij Wydrukuj….

- - -

W karcie Ogólne wybierz drukarkę do użycia i liczbę kopii do wydrukowania.

- - -

W karcie Ustawienia obrazu można dostosować Położenie i Rozmiar obrazu.

-

Położenie obrazu na stronie można dostosować także przeciągając go na podglądzie.

- - -

Jeśli używany jest wysokiej jakości papier fotograficzny, to przejdź do karty Ustawienia strony i wybierz właściwy Typ papieru. Aby uzyskać najwyższą możliwą jakość zdjęcia, należy także przejść do karty Jakość obrazu i wybrać ustawienie wysokiej jakości.

- - -

Kliknij przycisk Wydrukuj.

- - - -

Zauważ, że część kart wymienionych powyżej nie jest wyświetlanych w przypadku pewnych modeli drukarek. Dzieje się tak, ponieważ sterowniki tych drukarek nie umożliwiają zmiany części ustawień. Jeśli, na przykład, nie widać karty Jakość obrazu, to prawdopodobnie używany sterownik nie obsługuje tych ustawień.

- - diff -Nru eog-3.26.2/help/pl/rename-multiple.page eog-3.27.90/help/pl/rename-multiple.page --- eog-3.26.2/help/pl/rename-multiple.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatyczna zmiana nazw i numerowanie serii obrazów. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Zmiana nazw wielu obrazów jednocześnie - -

Jeśli potrzeba zmienić nazwy wielu obrazów, na przykład nadając im ujednolicone, ponumerowane nazwy:

- - - -

Otwórz galerię obrazów naciskając klawisz F9.

- - -

Zaznacz wszystkie obrazy do zmiany nazw przytrzymując klawisz Ctrl i klikając je.

-

Można także nacisnąć klawisze CtrlA, aby zaznaczyć wszystkie obrazy.

- - -

Kliknij Zapisz jako…. Zostanie otwarte okno z opcjami (ilustracja poniżej pokazuje, jak ono wygląda).

- - -

Obrazy ze zmienioną nazwą domyślnie są zapisywane w obecnym katalogu. Aby zapisać je w innym miejscu, zmień Katalog docelowy.

- - -

Użyj pola Format nazwy pliku, aby wybrać format nazw dla obrazów. Podgląd nazwy pliku pokazuje, jak nowe nazwy będą wyglądały. Sekcja poniżej zawiera porady na temat wyboru sposobu zmiany nazw.

- - -

Upewnij się, że rozwijana lista Format nazwy pliku jest ustawiona na jak jest, chyba że obrazy mają zostać konwertowane do innego formatu plików.

- - -

Kliknij przycisk Zapisz jako, a nazwy obrazów zostaną zmienione.

- - - - - -
- Wybór formatu nazw plików -

Nazwy plików są ustalane na podstawie pola Format nazwy pliku.

- - -

Można zachować oryginalną nazwę pliku jako część nowej nazwy pozostawiając %f w polu.

-

Na przykład, wpisanie paryż_%f w polu Format nazwy pliku spowoduje, że nazwy obrazów kwiatek.jpg, dom.jpg i kot.jpg zostaną zmienione na paryż_kwiatek.jpg, paryż_dom.jpg i paryż_kot.jpg.

- - -

Dodanie %n nada obrazom numery, zaczynając od liczby wybranej w Opcjach.

-

Na przykład, wpisanie słoneczko_%n w polu Format nazwy pliku spowoduje, że nazwy obrazów kwiatek.jpg, dom.jpg i kot.jpg zostaną zmienione na słoneczko_2.jpg, słoneczko_3.jpg i słoneczko_1.jpg (liczby będą nadawane według alfanumerycznej kolejności oryginalnych nazw).

- - -
- - diff -Nru eog-3.26.2/help/pl/shortcuts.page eog-3.27.90/help/pl/shortcuts.page --- eog-3.26.2/help/pl/shortcuts.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,168 +0,0 @@ - - - - - - Lista wszystkich skrótów klawiszowych. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Skróty klawiszowe - -

Lista wszystkich skrótów klawiszowych, których można używać w przeglądarce obrazów.

- -
- Otwieranie, zamykanie, zapisywanie i drukowanie - - - - - - - - - - - - - - - - - - - - - - - - - -

Otwieranie pliku obrazu

CtrlO

Zapisywanie obrazu pod tą samą nazwą pliku

CtrlS

Zapisywanie kopii obecnego obrazu pod nową nazwą pliku

ShiftCtrlS

Drukowanie obecnego obrazu

CtrlP

Zamknięcie obecnego obrazu

CtrlW

Ustawienie obrazu jako tło pulpitu

CtrlF8

-
- -
- Wyświetlanie obrazów - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Przejście do poprzedniego obrazu w katalogu

Backspace/W lewo

Przejście do następnego obrazu w katalogu

Spacja/W prawo

Przejście do pierwszego obrazu w katalogu

AltHome

Przejście do ostatniego obrazu w katalogu

AltEnd

Wybór losowego obrazu w katalogu

CtrlM

Galeria obrazów

F9

Pełny ekran

F11

Pokaz slajdów

F5

Rzeczywisty rozmiar

Ctrl0 (zero)

Dopasowanie

F

Przewijanie dużych obrazów

Altklawisze strzałek

-
- -
- Kopiowanie obrazu do wklejenia w innym programie - - - - - -

Kopiowanie

CtrlC

-
- -
- Powiększanie i obracanie - - - - - - - - - - - - - - - - - -

Powiększenie

+

Pomniejszenie

-

Obrót w prawo

CtrlR

Obrót w lewo

ShiftCtrlR

-
- -
- Inne - - - - - - - - - - - - - - - - - -

Panel boczny

CtrlF9

Właściwości obrazu

AltEnter

Cofnięcie

CtrlZ

Pomoc

F1

-
- diff -Nru eog-3.26.2/help/pl/slideshow.page eog-3.27.90/help/pl/slideshow.page --- eog-3.26.2/help/pl/slideshow.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,52 +0,0 @@ - - - - - - - - Kliknij Pokaz slajdów, aby wyświetlić wszystkie obrazy w katalogu jako pokaz slajdów. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Pokaz slajdów - -

Aby wyświetlić wszystkie obrazy w katalogu jako pokaz slajdów:

- - - -

Otwórz jeden z obrazów w katalogu.

- - -

Kliknij Pokaz slajdów lub naciśnij klawisz F5.

-

Zacznie się pełnoekranowy pokaz slajdów. Co kilka sekund zostanie wyświetlony nowy obraz. Można używać klawiszy strzałek W lewo i W prawo do ręcznego przechodzenia wstecz i naprzód, aby szybciej zmieniać obrazy lub wracać do poprzednio wyświetlonego obrazu.

- - -

Aby zakończyć pokaz slajdów, naciśnij klawisz Esc lub F5.

- - - -

Można zmienić ustawienia pokazu slajdów, takie jak czas wyświetlania obrazów. Temat o preferencjach pokazu slajdów zawiera więcej informacji.

- - diff -Nru eog-3.26.2/help/pl/translate.page eog-3.27.90/help/pl/translate.page --- eog-3.26.2/help/pl/translate.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - Tłumaczenie Przeglądarki obrazów - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Pomoc w tłumaczeniu -

Interfejs i dokumentacja Przeglądarki obrazów jest tłumaczona przez ogólnoświatową społeczność ochotników. Zapraszamy do współpracy.

-

Wiele języków nadal potrzebuje tłumaczeń.

-

Do rozpoczęcia tłumaczenia potrzebne jest utworzenie konta i dołączenie do zespołu tłumaczy dla danego języka. Umożliwi to wysyłanie nowych tłumaczeń.

- -

Można skontaktować się z tłumaczami GNOME za pomocą sieci IRC (w języku angielskim). Z powodu różnic stref czasowych odpowiedź może nie przyjść od razu.

-

Można także skontaktować się z zespołem tłumaczeń za pomocą listy pocztowej (w języku angielskim).

- diff -Nru eog-3.26.2/help/pl/view.page eog-3.27.90/help/pl/view.page --- eog-3.26.2/help/pl/view.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - Naciśnij klawisz W lewo lub W prawo, aby przełączyć obraz, albo użyj galerii obrazów do wyświetlenia wszystkich. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - -Wyświetlenie wszystkich obrazów w katalogu - -

Można szybko przeglądać wszystkie obrazy w katalogu otwierając jeden z obrazów, a następnie klikając przyciski Dalej i Wstecz po lewej i prawej stronie wyświetlanego obrazu. Można także wyświetlić galerię obrazów z małym podglądem wszystkich obrazów w katalogu.

- -
- Przeglądanie wszystkich obrazów w katalogu -

Jeśli w katalogu jest wiele obrazów, to można je wygodnie przeglądać bez potrzeby otwierania każdego z osobna.

- - -

Otwórz jeden z obrazów z danego katalogu.

- - -

Kliknij przyciski Dalej i Wstecz po lewej i prawej stronie wyświetlanego obrazu lub naciśnij klawisze W prawo i W lewo, aby przełączać między obrazami.

-

Można także używać klawiszy W górę i W dół lub spacji i Backspace.

- - -

Można przeglądać obrazy w trybie pełnoekranowym klikając przycisk Pełny ekran na pasku tytułowym lub naciskając klawisz F11. Użyj klawiszy, aby przełączać między obrazami.

-

Aby wrócić do zwykłego okna, naciśnij klawisz Esc lub F11.

- - -
- - - - diff -Nru eog-3.26.2/help/pl/zoom.page eog-3.27.90/help/pl/zoom.page --- eog-3.26.2/help/pl/zoom.page 2017-11-08 19:36:17.000000000 +0000 +++ eog-3.27.90/help/pl/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - - Powiększanie obrazu na ekranie. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - -Powiększanie - -

Można powiększać i pomniejszać obrazy, aby wyświetlić więcej lub mniej. Jest to przydatne do wyświetlenia dużego obrazu w całości lub przyjrzenia się szczegółom obrazu.

- - - -

Można powiększać za pomocą kółka myszy. Przewiń w górę, aby powiększyć lub w dół, aby pomniejszyć.

- - -

Można także powiększać za pomocą przycisków na pasku tytułowym. Kliknij ikonę Powiększ obraz, aby powiększyć lub ikonę Pomniejsz obraz, aby pomniejszyć. Wyglądają one jak znaki plusa i minusa.

- - -

Można także używać skrótów klawiszowych Ctrl+ lub Ctrl-.

- - - -

Aby wyświetlić obraz w oryginalnym, niezmienionym rozmiarze, wybierz poziom powiększenia 100% z rozwijanej listy na pasku tytułowym. Można także użyć skrótów klawiszowych Ctrl0 lub 1.

- -
- Dopasowanie do okna -

Można wybrać takie powiększenie, aby obraz pasował do rozmiaru okna. Włącz Dopasowanie z rozwijanej listy na pasku tytułowym, aby to zrobić.

-
- diff -Nru eog-3.26.2/help/pt_BR/bug-filing.page eog-3.27.90/help/pt_BR/bug-filing.page --- eog-3.26.2/help/pt_BR/bug-filing.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,85 +0,0 @@ - - - - - - Arquive um erro contra o Visualizador de imagem. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Informe um problema com o visualizador de imagens -

O Visualizador de imagens é mantido por uma comunidade de voluntários. Sua participação é bem-vinda.

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/pt_BR/commandline.page eog-3.27.90/help/pt_BR/commandline.page --- eog-3.26.2/help/pt_BR/commandline.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - Linha de comando - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -A linha de comando - -

Para iniciar o Visualizador de imagem a partir do Terminal, digite eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog imagem.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-Pasta eog -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Abre uma imagem em modo de tela cheia - eog --fullscreen imagem.jpeg -
- -
- Open image in a new instance - eog --new-instance imagem.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Imagens/ -
- diff -Nru eog-3.26.2/help/pt_BR/copy-paste.page eog-3.27.90/help/pt_BR/copy-paste.page --- eog-3.26.2/help/pt_BR/copy-paste.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,75 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Copiar e colar uma imagem -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/pt_BR/default.page eog-3.27.90/help/pt_BR/default.page --- eog-3.26.2/help/pt_BR/default.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,93 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Clique em Fechar.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/pt_BR/desktop-background.page eog-3.27.90/help/pt_BR/desktop-background.page --- eog-3.26.2/help/pt_BR/desktop-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,70 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/pt_BR/develop.page eog-3.27.90/help/pt_BR/develop.page --- eog-3.26.2/help/pt_BR/develop.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - Melhore o Visualizador de omagens - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Ajude a desenvolver -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/pt_BR/documentation.page eog-3.27.90/help/pt_BR/documentation.page --- eog-3.26.2/help/pt_BR/documentation.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,71 +0,0 @@ - - - - - Junte-se à equipe de documentação. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Ajude a escrever documentação - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/pt_BR/edit.page eog-3.27.90/help/pt_BR/edit.page --- eog-3.26.2/help/pt_BR/edit.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,95 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - -Editar ou excluir uma imagem - -
Editar uma imagem -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Excluir uma imagem -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/pt_BR/flip-rotate.page eog-3.27.90/help/pt_BR/flip-rotate.page --- eog-3.26.2/help/pt_BR/flip-rotate.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,105 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Clique em Editar.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Girando uma figura - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/pt_BR/format-change.page eog-3.27.90/help/pt_BR/format-change.page --- eog-3.26.2/help/pt_BR/format-change.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,126 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Clique em Salvar.

- - -
- - diff -Nru eog-3.26.2/help/pt_BR/formats-save.page eog-3.27.90/help/pt_BR/formats-save.page --- eog-3.26.2/help/pt_BR/formats-save.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,73 +0,0 @@ - - - - - - JPEG, PNG, BMP e outros. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - - Formatos suportados para salvar imagens: -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/pt_BR/formats-view.page eog-3.27.90/help/pt_BR/formats-view.page --- eog-3.26.2/help/pt_BR/formats-view.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,85 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - - Formatos de imagem suportados - -

The image viewer is able to open pictures in the following formats:

- -

ANI - Animação

 -

BMP - Bitmap

 -

GIF - Formato de Intercâmbio de Gráficos

 -

ICO - Ícone do Windows

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap from the PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Gráficos Vetoriais Escaláveis

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - Bitmap do X

 -

XPM - Bitmap do X

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/pt_BR/index.page eog-3.27.90/help/pt_BR/index.page --- eog-3.26.2/help/pt_BR/index.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,93 +0,0 @@ - - - - - Ajuda do visualizador de imagens Eye of GNOME. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Visualizador de imagens Eye of GNOME - Visualizador de imagens Eye of GNOME - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- Visualizar imagens -
- -
- Editar imagens -
- -
- Imprimir imagens -
- -
- Adicionar recursos adicionais - -
-
- Avançado -
- -
- Perguntas frequentes -
- -
- DIcas e truques -
- -
- Envolva-se -
- diff -Nru eog-3.26.2/help/pt_BR/introduction.page eog-3.27.90/help/pt_BR/introduction.page --- eog-3.26.2/help/pt_BR/introduction.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,71 +0,0 @@ - - - - - - Bem vindo ao Visualizador de imagens do Gnome. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Introdução - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/pt_BR/legal.xml eog-3.27.90/help/pt_BR/legal.xml --- eog-3.26.2/help/pt_BR/legal.xml 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Esta obra está licenciada sobre uma Licença Creative Commons Atribuição-Compartilhada Igual 3.0 dos Estados Unidos da América.

-

Como uma exceção especial, os detentores dos direitos autorais dão-lhe permissão para copiar, modificar, e distribuir o código de exemplo contido neste documento sob os termos de sua escolha, sem qualquer restrição.

- diff -Nru eog-3.26.2/help/pt_BR/license.page eog-3.27.90/help/pt_BR/license.page --- eog-3.26.2/help/pt_BR/license.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - - Informação legal. - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - - Licença -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

Você é livre:

- - - <em>Para compartilhar</em> -

Para copiar, distribuir e transmitir a obra.

- - - <em>To remix</em> -

To adapt the work.

- - -

Em consonância com as seguintes condições:

- - - <em>Atribuição</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Compartilhada Igual</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/pt_BR/open.page eog-3.27.90/help/pt_BR/open.page --- eog-3.26.2/help/pt_BR/open.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,80 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - - -Abrir uma imagem - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/pt_BR/plugin-exif-digital.page eog-3.27.90/help/pt_BR/plugin-exif-digital.page --- eog-3.26.2/help/pt_BR/plugin-exif-digital.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/pt_BR/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,138 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/pt_BR/plugin-fullscreen-background.page eog-3.27.90/help/pt_BR/plugin-fullscreen-background.page --- eog-3.26.2/help/pt_BR/plugin-fullscreen-background.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/pt_BR/plugin-fullscreen-double-click.page eog-3.27.90/help/pt_BR/plugin-fullscreen-double-click.page --- eog-3.26.2/help/pt_BR/plugin-fullscreen-double-click.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,75 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/pt_BR/plugin-picasa.page eog-3.27.90/help/pt_BR/plugin-picasa.page --- eog-3.26.2/help/pt_BR/plugin-picasa.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,75 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/pt_BR/plugin-python-console.page eog-3.27.90/help/pt_BR/plugin-python-console.page --- eog-3.26.2/help/pt_BR/plugin-python-console.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Console Python - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/pt_BR/plugin-send-by-mail.page eog-3.27.90/help/pt_BR/plugin-send-by-mail.page --- eog-3.26.2/help/pt_BR/plugin-send-by-mail.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,80 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/pt_BR/plugin-slideshow-shuffle.page eog-3.27.90/help/pt_BR/plugin-slideshow-shuffle.page --- eog-3.26.2/help/pt_BR/plugin-slideshow-shuffle.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,73 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/pt_BR/plugins.page eog-3.27.90/help/pt_BR/plugins.page --- eog-3.26.2/help/pt_BR/plugins.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,127 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Plug-ins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Mapa: Exibe a localização geográfica de uma foto digital em um mapa.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/pt_BR/plugin-zoom-width.page eog-3.27.90/help/pt_BR/plugin-zoom-width.page --- eog-3.26.2/help/pt_BR/plugin-zoom-width.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,72 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/pt_BR/preferences.page eog-3.27.90/help/pt_BR/preferences.page --- eog-3.26.2/help/pt_BR/preferences.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,157 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Preferências -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

Mostra qualquer parte transparente da imagem como um padrão quadriculado.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/pt_BR/print.page eog-3.27.90/help/pt_BR/print.page --- eog-3.26.2/help/pt_BR/print.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/pt_BR/rename-multiple.page eog-3.27.90/help/pt_BR/rename-multiple.page --- eog-3.26.2/help/pt_BR/rename-multiple.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,120 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/pt_BR/shortcuts.page eog-3.27.90/help/pt_BR/shortcuts.page --- eog-3.26.2/help/pt_BR/shortcuts.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,200 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Abre um arquivo de imagem

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Imprime a imagem atual

CtrlP

Close the current window

CtrlW

Define a imagem como plano de fundo da sua área de trabalho

CtrlF8

-
- -
- Visualizando imagens - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Seta para esquerda

Go to the next image in the folder

Barra de espaço / Seta para direita

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

Visualizando apresentação de slides

F5

Tamanho atual

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copiar

CtrlC

-
- -
- Ampliação e rotação - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Outro - - - - - - - - - - - - - - - - - -

Ver painel lateral

CtrlF9

Ver propriedades da imagem

AltReturn

Desfazer

CtrlZ

Ajuda

F1

-
- diff -Nru eog-3.26.2/help/pt_BR/slideshow.page eog-3.27.90/help/pt_BR/slideshow.page --- eog-3.26.2/help/pt_BR/slideshow.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Apresentação de slides - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/pt_BR/translate.page eog-3.27.90/help/pt_BR/translate.page --- eog-3.26.2/help/pt_BR/translate.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,80 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Ajude a traduzir -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/pt_BR/view.page eog-3.27.90/help/pt_BR/view.page --- eog-3.26.2/help/pt_BR/view.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,111 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/pt_BR/zoom.page eog-3.27.90/help/pt_BR/zoom.page --- eog-3.26.2/help/pt_BR/zoom.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/pt_BR/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,92 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Atribuição-Compartilhada Igual 3.0

- - - - - Amadeu A. Barbosa Júnior - amadeu@gmail.com - 2007. - - - - Rodrigo Flores - rodrigomarquesflores@gmail.com - 2008. - - - - Leonardo Ferreira Fontenelle - leo.fontenelle@gmail.com - 2008. - - - - Leonardo Gregianin - leogregianin@gmail.com - 2008. - - - - Djavan Fagundes - djavan@comum.org - 2010. - - - - Krix Apolinário - krixapolinario@gmail.com - 2011. - - - - Enrico Nicoletto - liverig@gmail.com - 2012, 2013. - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/ro/bug-filing.page eog-3.27.90/help/ro/bug-filing.page --- eog-3.26.2/help/ro/bug-filing.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ro/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/ro/commandline.page eog-3.27.90/help/ro/commandline.page --- eog-3.26.2/help/ro/commandline.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ro/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Deschiderea unei imagini în modul pe tot ecranul - eog --fullscreen imagine.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/ro/copy-paste.page eog-3.27.90/help/ro/copy-paste.page --- eog-3.26.2/help/ro/copy-paste.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ro/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,39 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/ro/default.page eog-3.27.90/help/ro/default.page --- eog-3.26.2/help/ro/default.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ro/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/ro/desktop-background.page eog-3.27.90/help/ro/desktop-background.page --- eog-3.26.2/help/ro/desktop-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ro/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/ro/develop.page eog-3.27.90/help/ro/develop.page --- eog-3.26.2/help/ro/develop.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ro/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/ro/documentation.page eog-3.27.90/help/ro/documentation.page --- eog-3.26.2/help/ro/documentation.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ro/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - Alăturați-vă echipei de documentație. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/ro/edit.page eog-3.27.90/help/ro/edit.page --- eog-3.26.2/help/ro/edit.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ro/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,59 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/ro/flip-rotate.page eog-3.27.90/help/ro/flip-rotate.page --- eog-3.26.2/help/ro/flip-rotate.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ro/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/ro/format-change.page eog-3.27.90/help/ro/format-change.page --- eog-3.26.2/help/ro/format-change.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,90 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/ro/formats-save.page eog-3.27.90/help/ro/formats-save.page --- eog-3.26.2/help/ro/formats-save.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/ro/formats-view.page eog-3.27.90/help/ro/formats-view.page --- eog-3.26.2/help/ro/formats-view.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - - Formate de imagini suportate - -

The image viewer is able to open pictures in the following formats:

- -

ANI - Animation

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Windows Icon

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap from the PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/ro/index.page eog-3.27.90/help/ro/index.page --- eog-3.26.2/help/ro/index.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Vizualizator de imagini Ochiul lui GNOME - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/ro/introduction.page eog-3.27.90/help/ro/introduction.page --- eog-3.26.2/help/ro/introduction.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Introducere - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/ro/legal.xml eog-3.27.90/help/ro/legal.xml --- eog-3.26.2/help/ro/legal.xml 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/ro/license.page eog-3.27.90/help/ro/license.page --- eog-3.26.2/help/ro/license.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ - - - - - - - Informații legale. - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - - Licență -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/ro/open.page eog-3.27.90/help/ro/open.page --- eog-3.26.2/help/ro/open.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/ro/plugin-exif-digital.page eog-3.27.90/help/ro/plugin-exif-digital.page --- eog-3.26.2/help/ro/plugin-exif-digital.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,102 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/ro/plugin-fullscreen-background.page eog-3.27.90/help/ro/plugin-fullscreen-background.page --- eog-3.26.2/help/ro/plugin-fullscreen-background.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/ro/plugin-fullscreen-double-click.page eog-3.27.90/help/ro/plugin-fullscreen-double-click.page --- eog-3.26.2/help/ro/plugin-fullscreen-double-click.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,39 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/ro/plugin-picasa.page eog-3.27.90/help/ro/plugin-picasa.page --- eog-3.26.2/help/ro/plugin-picasa.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,39 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/ro/plugin-python-console.page eog-3.27.90/help/ro/plugin-python-console.page --- eog-3.26.2/help/ro/plugin-python-console.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/ro/plugin-send-by-mail.page eog-3.27.90/help/ro/plugin-send-by-mail.page --- eog-3.26.2/help/ro/plugin-send-by-mail.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/ro/plugin-slideshow-shuffle.page eog-3.27.90/help/ro/plugin-slideshow-shuffle.page --- eog-3.26.2/help/ro/plugin-slideshow-shuffle.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/ro/plugins.page eog-3.27.90/help/ro/plugins.page --- eog-3.26.2/help/ro/plugins.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,92 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/ro/plugin-zoom-width.page eog-3.27.90/help/ro/plugin-zoom-width.page --- eog-3.26.2/help/ro/plugin-zoom-width.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/ro/preferences.page eog-3.27.90/help/ro/preferences.page --- eog-3.26.2/help/ro/preferences.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,118 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Preferințe -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Îmbunătățirea imaginilor -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Părțile transparente -

Selectați una din următoarele opțiuni pentru a determina cum sunt afișate părțile transparente ale unei imagini, dacă există:

- - -

Ca un model hașurat:

-

Afișează toate parțile transparente ale unei imagini sub forma unui model hașurat.

- - -

Ca o culoare personalizată:

-

Afișează toate parțile transparente ale unei imagini sub forma unei culori pe care o precizați apăsând pe butonul selectorului de culoare.

- - -

Ca fundal:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Preferințe module - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/ro/print.page eog-3.27.90/help/ro/print.page --- eog-3.26.2/help/ro/print.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,60 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/ro/rename-multiple.page eog-3.27.90/help/ro/rename-multiple.page --- eog-3.26.2/help/ro/rename-multiple.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/ro/shortcuts.page eog-3.27.90/help/ro/shortcuts.page --- eog-3.26.2/help/ro/shortcuts.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,164 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Deschiderea unui fișier imagine

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Tipărirea imaginii curente

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Vizualizarea imaginilor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/ro/slideshow.page eog-3.27.90/help/ro/slideshow.page --- eog-3.26.2/help/ro/slideshow.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Diaporamă - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/ro/translate.page eog-3.27.90/help/ro/translate.page --- eog-3.26.2/help/ro/translate.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/ro/view.page eog-3.27.90/help/ro/view.page --- eog-3.26.2/help/ro/view.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,75 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - -Vizualizarea imaginilor dintr-un dosar - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/ro/zoom.page eog-3.27.90/help/ro/zoom.page --- eog-3.26.2/help/ro/zoom.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ro/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Daniel Toma - daniel.digital2@gmail.com - 2011 - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/ru/bug-filing.page eog-3.27.90/help/ru/bug-filing.page --- eog-3.26.2/help/ru/bug-filing.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ru/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - Отправить отчёт об ошибке в Программе просмотра изображений. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Как сообщить о проблеме в приложении для просмотра изображений -

Программа просмотра изображений поддерживается сообществом добровольцев. Вы тоже можете принять участие.

- -

Если с приложением просмотра изображений возникли проблемы (например, сбой или непредвиденное поведение) или если в ней отсутствуют какие-то возможности, которые вы считаете необходимыми, отправьте отчёт об ошибке, перейдя по ссылке . С помощью отчётов разработчики узнают о возникших проблемах и устраняют их.

-

Чтобы принять участие, необходимо создать учётную запись, используя которую вы сможете создавать отчёты и добавлять комментарии. Регистрация также даст возможность получать по электронной почте обновления о состоянии созданного отчёта. Если у вас ещё нет учётной записи, перейдите по ссылке Создать учётную запись.

-

Как только вы получите учётную запись, войдите под своей учётной записью и нажмите File a BugCoreeog. Перед тем, как создать отчёт, прочтите руководство по созданию отчётов об ошибках, а также проверьте, не сообщал ли кто-то до вас о найденной ошибке.

-

Чтобы заполнить данные об ошибке, выберите компонент в меню Component. Если вы не уверены, какой компонент нужно выбрать, выберите компонент general.

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

Вашему отчёту будет присвоен идентификационный номер, и его статус будет обновляться по мере обработки. На исправление ошибок может потребоваться некоторое время. Разработчики могут запросить у вас дополнительную информацию, способную помочь им в определении причин ошибки.

- diff -Nru eog-3.26.2/help/ru/commandline.page eog-3.27.90/help/ru/commandline.page --- eog-3.26.2/help/ru/commandline.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ru/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - Командная строка - Команда eog может открыть любое количество изображений в различных режимах. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Командная строка - -

Чтобы запустить Программу просмотра изображений из Терминала, наберите eog.

-

Можно открыть определённый файл, указав его имя после команды eog:

-eog image.jpeg -

Можно открыть определённую папку, набрав имя папки после команды eog:

-eog папка -

Чтобы увидеть сразу все изображения в папке, можно перейти в режим просмотра галереи изображений.

- -
- Просмотр изображения в полноэкранном режиме - eog --fullscreen image.jpeg -
- -
- Открытие изображения в новом экземпляре программы - eog --new-instance image.jpeg -
-
- Открытие изображения в режиме слайд-шоу - eog --slide-show Изображения/ -
- diff -Nru eog-3.26.2/help/ru/copy-paste.page eog-3.27.90/help/ru/copy-paste.page --- eog-3.26.2/help/ru/copy-paste.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ru/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - - - Как скопировать и вставить изображение из программы просмотра в другое приложение. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Копирование и вставка изображения -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

Изображение скопируется в буфер обмена, после чего его можно вставить в документ LibreOffice, Gimp или другое приложение.

- - diff -Nru eog-3.26.2/help/ru/default.page eog-3.27.90/help/ru/default.page --- eog-3.26.2/help/ru/default.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ru/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Сделайте «Глаз GNOME» приложением для просмотра изображений по умолчанию. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Открытие изображений в программе просмотра по умолчанию -

Если вы хотите сделать Программу просмотра изображений приложением, в котором по умолчанию должны открываться некоторые типы файлов с изображениями:

- - - -

Щёлкните в файловом менеджере Наутилус правой кнопкой мыши по файлу изображения и выберите Свойства.

- - -

Перейдите на вкладку Открыть с помощью. Появится список Рекомендуемые приложения.

- - -

Выберите Просмотр изображений и нажмите Установить по умолчанию.

-

Если пункт Просмотр изображений отсутствует в списке Рекомендуемые приложения, нажмите Показать другие приложения. В появившемся списке выберите Просмотр изображений и нажмите Установить по умолчанию.

- - -

Нажмите Закрыть.

- - - -

В дальнейшем двойной щелчок на файле этого типа будет открывать файл в программе просмотра изображений.

- - diff -Nru eog-3.26.2/help/ru/desktop-background.page eog-3.27.90/help/ru/desktop-background.page --- eog-3.26.2/help/ru/desktop-background.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ru/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Сделайте своё любимое изображение фоном (обоями) рабочего стола. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Установка текущего изображения в качестве фона рабочего стола -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

Просматриваемое изображение будет использовано в качестве фона рабочего стола. Затем будет задан вопрос, хотите ли вы изменить свойства фона. Если нажать Скрыть, сообщение пропадёт.

- diff -Nru eog-3.26.2/help/ru/develop.page eog-3.27.90/help/ru/develop.page --- eog-3.26.2/help/ru/develop.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ru/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Улучшение Программы просмотра изображений - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Помощь в разработке -

Программа просмотра изображений разрабатывается и поддерживается сообществом добровольцев. Вы тоже можете принять в этом участие.

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/ru/documentation.page eog-3.27.90/help/ru/documentation.page --- eog-3.26.2/help/ru/documentation.page 2017-08-10 20:19:27.000000000 +0000 +++ eog-3.27.90/help/ru/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - Присоединиться к команде документирования. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Помощь в написании документации - -

Документация для Программы просмотра изображений поддерживается сообществом добровольцев. Вы тоже можете принять в этом участие.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/ru/edit.page eog-3.27.90/help/ru/edit.page --- eog-3.26.2/help/ru/edit.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - -Редактирование или удаление изображения - -
Редактирование изображения -

Программа просмотра изображений может использоваться только для просмотра изображений, но не для их редактирования. Для редактирование нужно использовать стороннее приложение, например графический редактор GIMP. Чтобы открыть изображение для редактирования в другом приложении:

- - -

Click Open With, -or right-click on the image.

- - -

Выберите приложение, которое необходимо использовать для редактирования изображения.

- - -

После завершения редактирования сохраните изображение и закройте приложение.

- - -

Программа просмотра изображений определит, что изображение было изменено, и перезагрузит его.

- - -
- -
-Удаление изображения -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/ru/flip-rotate.page eog-3.27.90/help/ru/flip-rotate.page --- eog-3.26.2/help/ru/flip-rotate.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - По горизонтали/по вертикали, по часовой стелке/против часовой стрелки - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Отражение или поворот изображений - -

Если изображения повёрнуты неправильно или зеркально отражены, можно исправить это, вернув их в правильное положение с помощью поворота или отражения.

- - -
-Отражение изображения - -

Нажмите Правка.

 -

Выберите Отразить горизонтально или Отразить по вертикали.

 - -

If you want to keep the picture flipped in this way, click Save.

-

В противном случае не сохраняйте изображение, и при следующем открытии оно будет иметь прежнюю ориентацию.

- - -
- -
-Поворот изображения - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

В противном случае не сохраняйте изображение, и при следующем открытии оно будет иметь прежнюю ориентацию.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Поворот по часовой стрелке

CtrlR

Поворот против часовой стрелки

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/ru/format-change.page eog-3.27.90/help/ru/format-change.page --- eog-3.26.2/help/ru/format-change.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - Вы можете преобразовать изображения из одного формата в другой. Для нескольких изображений можно сделать это в пакетном режиме. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Преобразование в другой формат файлов - -

Изображения хранятся в определённом формате файлов, например, JPEG или PNG. Изображения можно преобразовывать из одного формата в другой.

- -
- Преобразование одиночного изображения в другой формат - - -

Click Save As…. The -Save Image window will pop up.

- - -

В поле имени замените расширение файла на формат файла, в который нужно преобразовать изображение. Расширение — это часть имени файла после точки.

-

Например, чтобы преобразовать файл JPEG (.jpg) в Bitmap (.bmp):

-

исходный файл: image.jpg

-

новый файл: image.bmp

- - -

Нажмите Сохранить, и новый файл будет сохранён в новом формате. Старый файл (в старом формате) останется без изменений и удалён не будет.

- - - -

Программа просмотра изображений пытается определить, в каком формате нужно сохранить изображение в зависимости от выбранного расширения файла. Если приложение не распознало указанное вами расширение, или вы не знаете, какое расширение использовать, нажмите кнопку Поддерживаемые форматы изображений в окне Сохранить изображение. Это позволит вам выбрать формат файла из выпадающего списка.

- -
- -
- Преобразование нескольких изображений в другой формат -

Можно преобразовать из одного формата файлов в другой сразу несколько изображений. Это полезно, если у вас есть большое количество изображений, которые нужно преобразовать.

- - -

В галерее изображений удерживайте нажатой клавишу Ctrl и поочерёдно выберите изображения, которые нужно преобразовать. Чтобы выбрать все изображения, нажмите CtrlA.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

Преобразованные изображения по умолчанию будут сохранены в текущую папку. Если нужно сохранить их в другое место, измените Каталог назначения.

- - -

Выберите формат файлов, в который вы хотите преобразовать изображения, из выпадающего списка справа от поля Формат имени файла.

- - -

Нажмите Сохранить.

- - -
- - diff -Nru eog-3.26.2/help/ru/formats-save.page eog-3.27.90/help/ru/formats-save.page --- eog-3.26.2/help/ru/formats-save.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - JPEG, PNG, BMP и другие. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - - Форматы, поддерживаемые для сохранения изображений -

Программа просмотра изображений может сохранять изображения в файлах следующих форматов:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

Список доступных форматов для сохранения зависит от параметров вашей системы.

 - diff -Nru eog-3.26.2/help/ru/formats-view.page eog-3.27.90/help/ru/formats-view.page --- eog-3.26.2/help/ru/formats-view.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - - Программа просмотра изображений может показывать изображения различных форматов, включая PNG, JPEG и TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - - Поддерживаемые форматы изображений - -

Программа просмотра изображений способна открывать изображения следующих форматов:

- -

ANI — Анимация

 -

BMP — Bitmap

 -

GIF — Graphics Interchange Format

 -

ICO — Значок Windows

 -

JPEG — Joint Photographic Experts Group

 -

PCX — PC Paintbrush

 -

PNG — Portable Network Graphics

 -

PNM — Portable Anymap из инструментария PPM

 -

RAS — Растровое изображение Sun

 -

SVG — Scalable Vector Graphics

 -

TGA — Targa

 -

TIFF — Tagged Image File Format

 -

WBMP — Wireless Bitmap

 -

XBM — X Bitmap

 -

XPM — X Pixmap

 - -

При попытке открыть изображение не поддерживаемого формата, вы получите сообщение об ошибке «Не удалось загрузить изображение 'имя_изображения'».

- diff -Nru eog-3.26.2/help/ru/index.page eog-3.27.90/help/ru/index.page --- eog-3.26.2/help/ru/index.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - Справка по Программе просмотра изображений «Глаз GNOME». - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Программа просмотра изображений «Глаз GNOME» - Программа просмотра изображений «Глаз GNOME» - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- Просмотр изображений -
- -
- Редактирование изображений -
- -
- Печать изображений -
- -
- Дополнительные возможности - -
-
- Прочее -
- -
- Часто задаваемые вопросы -
- -
- Полезные советы -
- -
- Принять участие -
- diff -Nru eog-3.26.2/help/ru/introduction.page eog-3.27.90/help/ru/introduction.page --- eog-3.26.2/help/ru/introduction.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Добро пожаловать в Программу просмотра изображений «Глаз GNOME». - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Введение - -

Глаз GNOME — это программа просмотра изображений. С её помощью можно просматривать изображения почти любого типа. Она может работать с большими коллекциями изображений и показывать слайд-шоу. Она также позволяет вносить некоторые изменения в изображения, например, поворачивать, отражать или преобразовывать изображения в другой формат.

- - diff -Nru eog-3.26.2/help/ru/legal.xml eog-3.27.90/help/ru/legal.xml --- eog-3.26.2/help/ru/legal.xml 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,8 +0,0 @@ - - -

Это руководство распространяется под лицензией Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/ru/license.page eog-3.27.90/help/ru/license.page --- eog-3.26.2/help/ru/license.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - - Правовая информация. - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - - Лицензия -

Это руководство рапространяется под лицензией CreativeCommons Attribution-Share Alike 3.0 Unported.

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

При соблюдении следующих условий:

- - - <em>Указание авторства</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/ru/open.page eog-3.27.90/help/ru/open.page --- eog-3.26.2/help/ru/open.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,39 +0,0 @@ - - - - - - Открытие изображений в новом окне. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - - -Открытие изображения - -

Изображения должны автоматически открываться в программе просмотра изображений по двойному щелчку в менеджере файлов. Если этого не происходит, программу просмотра изображений нужно сделать приложением по умолчанию.

- -

По умолчанию каждое изображение открывается в отдельном окне программы просмотра изображений, но при желании можно просматривать несколько изображений в одном окне.

- -

Изображения можно открывать непосредственно из программы просмотра изображений:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Выберите нужное изображение и нажмите Открыть.

 - - - diff -Nru eog-3.26.2/help/ru/plugin-exif-digital.page eog-3.27.90/help/ru/plugin-exif-digital.page --- eog-3.26.2/help/ru/plugin-exif-digital.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,91 +0,0 @@ - - - - - - Просмотр информации типа настроек камеры и гистограммы, географического местоположения и даты. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Просмотр подробной информации об изображении - -

В изображения, сделанные с помощью цифровых фотокамер, встраивается различная дополнительная информация: дата съёмки, значение экспозиции и даже иногда место съёмки.

- -

В этом разделе объясняется, как получить доступ к этой информации.

- -
-Просмотр даты в строке состояния - -

Можно сделать так, чтобы в строке состояния внизу окна отображалась дата съёмки изображения.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Подробные данные Exif -

Подробная информация, хранящаяся в цифровых фотографиях, называется данными Exif. Её можно просматривать, установив модуль расширения для программы просмотра изображений.

- - - -

Для включения этой возможности должен быть установлен пакет eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

Также можно выводить в строку состояния параметры камеры, используемые при съёмке фото. Выберите Данные EXIF на вкладке Модули и нажмите Параметры. Отметьте флажком параметр Показывать параметры камеры в панели состояния.

- - -
- -
- Отображение места съёмки на карте -

Некоторые фотокамеры умеют добавлять к цифровым фотографиям информацию о географическом местоположении (геотеги). Обычно геотеги — это просто координаты GPS (широта и долгота) места, в котором был сделан снимок.

- - - -

Для включения этой возможности должен быть установлен пакет eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

На карте будет показано место съёмки изображения, только если в это изображение добавлена информация о географическом местоположении. Многие фотокамеры не добавляют эту информацию в изображения.

-
- - - diff -Nru eog-3.26.2/help/ru/plugin-fullscreen-background.page eog-3.27.90/help/ru/plugin-fullscreen-background.page --- eog-3.26.2/help/ru/plugin-fullscreen-background.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Позволяет изменить цвет фона при просмотре во весь экран. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Изменение цвета фона в полноэкранном режиме - -

При желании, можно изменить цвет фона в полноэкранном режиме.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Теперь фон в полноэкранном режиме будет иметь выбранный вами цвет.

- -

Для включения этой возможности должен быть установлен пакет eog-plugins.

- - diff -Nru eog-3.26.2/help/ru/plugin-fullscreen-double-click.page eog-3.27.90/help/ru/plugin-fullscreen-double-click.page --- eog-3.26.2/help/ru/plugin-fullscreen-double-click.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Переход в полноэкранный режим двойным щелчком на изображении. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Переход в полноэкранный режим по двойному щелчку - - - -

Можно сделать так, чтобы двойной щелчок на изображениях в программе просмотра открывал их в полноэкранном режиме.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Теперь двойной щелчок на изображении будет переключать программу между полноэкранным и обычным (в окне) режимами.

- - diff -Nru eog-3.26.2/help/ru/plugin-picasa.page eog-3.27.90/help/ru/plugin-picasa.page --- eog-3.26.2/help/ru/plugin-picasa.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Загрузите изображения в PicasaWeb непосредственно из программы просмотра изображений. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Загрузка фотографий в <app>PicasaWeb</app> - -

PicasaWeb — это служба фотоальбомов, с помощью которой можно делиться изображениями с другими людьми в Интернете. Вы можете добавить кнопку для загрузки изображений в PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

Для включения этой возможности должен быть установлен пакет eog-plugins.

- - diff -Nru eog-3.26.2/help/ru/plugin-python-console.page eog-3.27.90/help/ru/plugin-python-console.page --- eog-3.26.2/help/ru/plugin-python-console.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - Консоль Python можно использовать для добавления дополнительных возможностей и запуска сценариев в программе просмотра изображений. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Консоль Python - -

Программа просмотра изображений имеет систему модулей, использующую язык сценариев Python. При активации Консоли Python можно получить прямой доступ к интерпретатору Python из программы просмотра изображений, который можно использовать, например, для написания сценариев или программных манипуляций с изображениями.

- - - -

Для включения этой возможности должен быть установлен пакет eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Выберите модуль Консоль Python и нажмите Закрыть.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/ru/plugin-send-by-mail.page eog-3.27.90/help/ru/plugin-send-by-mail.page --- eog-3.26.2/help/ru/plugin-send-by-mail.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,42 +0,0 @@ - - - - - - Отправьте изображения, вложив их в сообщение электронной почты. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Отправка изображений по электронной почте - -

Можно добавить кнопку, предоставляющую удобный способ для отправки изображений другим людям по электронной почте.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

Для включения этой возможности должен быть установлен пакет eog-plugins.

- - -

Для работы с вашей почтовой учётной записью необходимо настроить клиент Evolution.

- - - - - diff -Nru eog-3.26.2/help/ru/plugin-slideshow-shuffle.page eog-3.27.90/help/ru/plugin-slideshow-shuffle.page --- eog-3.26.2/help/ru/plugin-slideshow-shuffle.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - - Показ изображений в слайд-шоу в случайном порядке. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Случайный порядок в слайд-шоу - -

Можно сделать так, чтобы при запуске слайд-шоу изображения отображались в случайном порядке.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

Для включения этой возможности должен быть установлен пакет eog-plugins.

- - diff -Nru eog-3.26.2/help/ru/plugins.page eog-3.27.90/help/ru/plugins.page --- eog-3.26.2/help/ru/plugins.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,82 +0,0 @@ - - - - - - Установка модулей для доступа к дополнительным возможностям. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Модули - -

Вы можете установить пакет eog-plugins, чтобы добавить дополнительные модули для программы просмотра изображений. Модули и предоставляемые ими возможности перечислены ниже.

- - -

Установить пакет eog-plugins можно с помощью менеджера пакетов вашего дистрибутива Linux.

- - - -

установка eog-plugins

- - - - -

В eog-plugins включены следующие модули:

- - - -

Дата в строке состояния: показывает в строке состояния окна дату съёмки изображения.

- - -

Данные EXIF: показывает параметры камеры и гистограммы для цифровых фотографий.

- - -

Фон в полноэкранном режиме: позволяет изменять фон в полноэкранному режиме просмотра.

- - -

Полноэкранный режим по двойному щелчку: включить возможность перехода в полноэкранный режим по двойному щелчку.

- - -

Карта: показывает географическое положение места съёмки фотографии.

- - -

Загрузчик PicasaWeb: загружает изображения в PicasaWeb.

- - -

Консоль Python: сценарная консоль python для программы просмотра изображений.

- - -

Отправить по эл. почте: отправляет изображения, прикрепляя их к сообщениям.

- - -

Случайное слайд-шоу: включает случайный режим просмотра слайд-шоу.

- - -

Уместить изображение по ширине: изменяет масштаб изображения таким образом, чтобы изображение умещалось в окне.

- - - - -

Управлять модулями можно из вкладки Модули в окне параметров программы.

- - - diff -Nru eog-3.26.2/help/ru/plugin-zoom-width.page eog-3.27.90/help/ru/plugin-zoom-width.page --- eog-3.26.2/help/ru/plugin-zoom-width.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Изменяет масштаб изображения таким образом, чтобы изображение умещалось в окне. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Размер изображения по ширине - -

Если вы хотите растянуть изображение по ширине, включите модуль Уместить изображение по ширине.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

Для включения этой возможности должен быть установлен пакет eog-plugins.

- - diff -Nru eog-3.26.2/help/ru/preferences.page eog-3.27.90/help/ru/preferences.page --- eog-3.26.2/help/ru/preferences.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,95 +0,0 @@ - - - - - - Параметры просмотра, слайд-шоу и модулей. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Параметры -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Параметры просмотра изображений - - - - Улучшение изображения -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

Если включен флажок Автоматическая ориентация, изображения будут автоматически поворачиваться в соответствии с метаданными Exif. Это информация об изображении, автоматически добавляемая цифровой фотокамерой, в том числе сведения об ориентации фотокамеры при выполнении снимка. Например, если автоматическая ориентация включена, портретные фотографии автоматически будут повёрнуты вертикально. Поворот не будет сохранён, если вы не сохраните повёрнутое изображение.

-

Автоматическая ориентация работает не со всеми изображениями. Автоматически могут быть повёрнуты только изображения, сделанные с помощью фотокамеры, добавляющей метаданные Exif с информацией об ориентации снимка.

- - - Прозрачные области -

Выберите один из следующих параметров, чтобы определить, как должны отображаться прозрачные области изображения , если они есть:

- - -

В виде клетчатого поля:

-

Показывать все прозрачные части изображения в виде клетчатого узора.

- - -

Выбранным цветом:

-

Показывает все прозрачные части изображения выбранным цветом. Чтобы выбрать цвет, нажмите кнопку выбора цвета.

- - -

Как фон:

-

Показывает прозрачные части изображения, используя цвет фона, если в разеде Фон выбран цвет. Иначе будет использоваться цвет фона по умолчанию.

- - - - -
- - -
-Параметры слайд-шоу - -

Настройка параметров слайд-шоу:

- - -

Масштабирование изображения — здесь можно выбрать, следует ли увеличивать изображения, размер которых меньше экрана так, чтобы они заполняли собой экран.

- - -

Последовательность позволяет выбрать длительность показа каждого изображения (от 1 до 100 секунд) до того, как его сменит следующее изображение.

- - -

Включите Зациклить последовательность, если хотите, чтобы слайд-шоу повторялось бесконечно. Если эта опция отключена, слайд-шоу начнётся с выбранного вами изображения и закончится последним изображением в папке.

- - -
- - -
-Параметры модулей - - - - -

Здесь вы можете выбрать любые дополнительные возможности. Изображение слева показывает модули, которые доступны по умолчанию.

- -

Вы можете также установить пакет eog-plugins, содержащий модули, предоставляющие некоторые дополнительные возможности. После его установки можно будет активировать дополнительные модули, подобные показанным на иллюстрации справа.

-
- - diff -Nru eog-3.26.2/help/ru/print.page eog-3.27.90/help/ru/print.page --- eog-3.26.2/help/ru/print.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/ru/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Печать изображения - -

Чтобы отправить на печать просматриваемое в данный момент изображение:

- - - -

Click Print….

- - -

На вкладке Общие выберите принтер, на котором вы хотите распечатать изображение, и количество копий.

- - -

На вкладке Параметры изображения можно настроить положение и размер изображения.

-

Положение изображения на странице также можно настроить, перетаскивая его мышью в поле предварительного просмотра печати.

- - -

Если вы используете высококачественную фотобумагу, перейдите на вкладку Параметры страницы и выберите Тип бумаги. Также рекомендуется перейти на вкладку Качество изображения и выбрать высокое качество печати, таким образом вы получите наилучшее качество печати.

- - -

Нажмите Печать.

- - - -

Обратите внимание, что некоторые из упомянутых выше вкладок не отображаются для некоторых моделей принтеров. Причина в том, что драйверы этих принтеров не позволяют изменять некоторые параметры. Так, например, если вы не видите вкладку Качество изображения, то скорее всего драйвер вашего принтера не поддерживает эти настройки.

- - diff -Nru eog-3.26.2/help/ru/rename-multiple.page eog-3.27.90/help/ru/rename-multiple.page --- eog-3.26.2/help/ru/rename-multiple.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/ru/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ - - - - - - - Автоматическое переименование и нумерация пакетов изображений. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Переименование нескольких изображений одновременно - -

Если у вас есть множество изображений, которые нужно переименовать, например, чтобы они имели стандартное имя с нумерацией:

- - - -

Откройте галерею изображений нажатием клавиши F9.

- - -

Выберите из галереи все изображения, которые нужно переименовать, удерживая нажатой клавишу Ctrl и поочерёдно щёлкая на изображениях.

-

Если нужно выделить все изображения, нажмите CtrlA.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

Переименованные изображения по умолчанию будут сохранены в текущей папке. Чтобы сохранить их в другом месте, измените Каталог назначения.

- - -

Используйте поле Формат имени файла для выбора формата имён для изображений. В поле Просмотр имени файла вы увидите, как будут выглядеть новые имена файлов. Советы по выбору формата имён файлов смотрите ниже, в разделе .

- - -

Убедитесь, что в выпадающем списке Формат имени файла выбрано значение «как есть», если вы не собираетесь преобразовать изображения в другой формат файлов.

- - -

Нажмите Сохранить как, и изображения будут переименованы.

- - - - - -
- Выбор формата имён файлов -

Имена переименованных файлов будут зависеть от того, что вы укажете в поле Формат имени файла.

- - -

Можно использовать исходное имя файла, как часть нового имени, подставив в поле %f.

-

Например, если набрать paris_%f в поле Формат имени файла, изображения с именами flower.jpg, house.jpg и cat.jpg будут переименованы в paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

При добавлении %n изображения будут последовательно перенумерованы, начиная с номера, указанного вами в диалоге настройки имён файлов.

-

Например, если набрать sunshine_%n в поле Формат имени файла, изображения с именами flower.jpg, house.jpg и cat.jpg будут переименованы в sunshine_2.jpg, sunshine_3.jpg и sunshine_1.jpg (нумерация производится в алфавитном порядке их исходных имён файлов).

- - -
- - diff -Nru eog-3.26.2/help/ru/shortcuts.page eog-3.27.90/help/ru/shortcuts.page --- eog-3.26.2/help/ru/shortcuts.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/ru/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,162 +0,0 @@ - - - - - - Список всех комбинаций клавиш. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Комбинации клавиш - -

Это список всех комбинаций клавиш, которые можно использовать в программе просмотра изображений.

- -
- Открытие, закрытие, сохранение и печать - - - - - - - - - - - - - - - - - - - - - - - - - -

Открыть файл изображения

CtrlO

Сохранить изображение в том же файле

CtrlS

Сохранить копию текущего изображения в файле с другим именем

ShiftCtrlS

Печать текущего изображения

CtrlP

Закрыть текущее окно

CtrlW

Установить изображение в качестве фона рабочего стола

CtrlF8

-
- -
- Просмотр изображений - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Перейти к предыдущему изображению в папке

Back space / стрелка влево

Перейти к следующему изображению в папке

Пробел / стрелка вправо

Перейти к первому изображению в папке

AltHome

Перейти к последнему изображению в папке

AltEnd

Выбрать случайное изображение из папки

CtrlM

Просмотр галереи изображений

F9

Полноэкранный режим

F11

Просмотр слайд-шоу

F5

Реальный размер

Ctrl0 (ноль)

Уместить в окне

F

Прокрутка изображения

Altклавиши со стрелками

-
- -
- Копирование изображения и вставка в другое приложение - - - - - -

Копировать

CtrlC

-
- -
- Масштабирование и поворот - - - - - - - - - - - - - - - - - -

Увеличить масштаб

+

Уменьшить масштаб

-

Повернуть по часовой стрелке

CtrlR

Повернуть против часовой стрелки

ShiftCtrlR

-
- -
- Другое - - - - - - - - - - - - - - - - - -

Показать боковую панель

CtrlF9

Показать свойства изображения

AltReturn

Отменить действие

CtrlZ

Справка

F1

-
- diff -Nru eog-3.26.2/help/ru/slideshow.page eog-3.27.90/help/ru/slideshow.page --- eog-3.26.2/help/ru/slideshow.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/ru/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Слайд-шоу - -

Чтобы просмотреть все изображения в папке в виде слайд-шоу:

- - - -

Откройте одно из изображений в папке.

- - -

Click Slideshow or press - F5.

-

Будет начат показ слайд-шоу в полноэкранном режиме. Изображение будет меняться на новое каждые несколько секунд. Если вы хотите пролистывать слайды быстрее или вернуться к ранее показанному изображению, используйте клавиши ← и → для перехода вручную.

- - -

Для завершения слайд-шоу нажмите Esc или F5.

- - - -

Можно изменить параметры слайд-шоу, например, длительность показа каждого изображения. Более подробно это описано в теме параметры слайд-шоу.

- - diff -Nru eog-3.26.2/help/ru/translate.page eog-3.27.90/help/ru/translate.page --- eog-3.26.2/help/ru/translate.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/ru/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - Локализация Программы просмотра изображений - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Помощь в переводе -

Пользовательский интерфейс и документацию к Программе просмотра изображений переводит сообщество добровольцев со всего мира. Вы тоже можете принять в этом участие.

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

Пообщаться с другими переводчиками GNOME можно с помощью irc. Участники этого канала живут в разных странах мира, поэтому вы можете не получить ответ немедленно из за разницы во времени в разных часовых поясах.

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/ru/view.page eog-3.27.90/help/ru/view.page --- eog-3.26.2/help/ru/view.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/ru/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,70 +0,0 @@ - - - - - - Нажимайте клавиши ← и → для перехода между изображениями или используйте галерею для просмотра всех изображений. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - -Просмотр всех изображений в папке - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Переход между изображениями в папке -

Если у вас есть папка, содержащая несколько изображений, то существует удобный способ просмотреть все эти изображения, не открывая каждое из них отдельно.

- - -

Откройте любое изображение из папки, содержимое которой вы хотите просмотреть.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

Чтобы вернуться в обычный режим, нажмите Esc или F11.

- - -
- - - - diff -Nru eog-3.26.2/help/ru/zoom.page eog-3.27.90/help/ru/zoom.page --- eog-3.26.2/help/ru/zoom.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/ru/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - - Василий Фаронов <qvvx@yandex.ru>, 2007Алексей Кабанов - ak099@mail.ru - 2012 - - - -Масштабирование - -

Можно изменить масштаб изображения, чтобы оно выглядело на экране крупнее или меньше. Это полезно, если вы хотите увидеть большое изображение целиком или получше рассмотреть мелкие детали изображения.

- - - -

Изменить масштаб можно с помощью колёсика мыши. Крутите его вверх, чтобы увеличить масштаб, или вниз для уменьшения масштаба.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Изменение масштаба изображения по размеру окна -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/sl/bug-filing.page eog-3.27.90/help/sl/bug-filing.page --- eog-3.26.2/help/sl/bug-filing.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Uporabniški priročnik za pregledovalnik slik. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - -Poročajte težavo v pregledovalniku slik -

Pregledovalnik slik vzdržuje skupnost prostovoljcev. Vabimo vas k sodelovanju.

- -

Če imate s pregledovalnikom slik težave (na primer če se sesuje ali se obnaša nepričakovano) ali če mu manjka zmožnost, ki bi jo po vašem mnenju moral imeti, poročajte poročilo o hrošču s klikom na povezavo . Poročila o hrošču so način s katerim razvijalci programov sledijo težavam, da jih lahko popravijo.

-

Za sodelovanje potrebujete račun, ki vam bo dal zmožnost dostopa, poročanja hroščev in delanja opomb. Vpisati se morate tudi zato, da lahko preko e-pošte prejemate posodobitve o stanju vašega hrošča. Če računa še nimate, kliknite Nov račun za njegovo ustvarjanje.

-

Ko imate račun, se prijavite in kliknite na File a BugCoreeog. Pred poročanjem hrošča si preberite smernice o poročanju hroščev in preverite, če hrošč že obstaja.

-

Za poročanje hrošča v meniju Sestavni del izberite sestavni del. Če niste prepričani, v katerem sestavnem delu je hrošč, izberite splošno.

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

Vašemu poročilu bo dano število ID. Njegovo stanje se bo tekom upravljanja posodabljalo. Popravljanje hroščev lahko traja nekaj časa in razvijalci vas bodo morda vprašali za dodatne informacije za pomoč pri ugotavljanju kaj je težava.

- diff -Nru eog-3.26.2/help/sl/commandline.page eog-3.27.90/help/sl/commandline.page --- eog-3.26.2/help/sl/commandline.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - Ukazna vrstica - Ukaz eog lahko odpre številne slike v različnih načinih. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Ukazna vrstica - -

Za zagon Pregledovalnika slik iz Terminala vnesite eog.

-

Določeno datoteko lahko odprete z vnosom imena datoteke za ukaz eog:

-eog slika.jpeg -

Določeno mapo lahko odprete z vnosom imena mape za ukazom eog:

-Mapa eog -

Za ogled vseh slik v mapi naenkrat boste morda želeli brskati po galeriji slik.

- -
- Odpri sliko v celozaslonskem načinu - eog --fullscreen slika.jpeg -
- -
- Odprtje slike v novem oknu - eog --new-instance slika.jpeg -
-
- Odpiranje mape v načinu predstavitve - eog --slide-show Slike/ -
- diff -Nru eog-3.26.2/help/sl/copy-paste.page eog-3.27.90/help/sl/copy-paste.page --- eog-3.26.2/help/sl/copy-paste.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - - Kako kopirati/prilepiti iz pregledovalnika slik v drug program. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Kopiranje in lepljenje slike -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

Sedaj je bila slika kopirana na odložišče in jo lahko prilepite v dokument LibreOffice, sliko Gimp ali drug program.

- - diff -Nru eog-3.26.2/help/sl/default.page eog-3.27.90/help/sl/default.page --- eog-3.26.2/help/sl/default.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Nastavitev pregledovalnika slik kot privzetega programa za ogled slik. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Privzeto odpiranje slik s pregledovalnikom slik. -

V primeru da želite nastaviti pregledovalnik slik kot privzet program za odpiranje določenih vrst slikovnih datotek:

- - - -

V programu datoteke desno kliknite na datoteko in izberite Lastnosti.

- - -

Kliknite na zavihek Odpri z. Pojavil se bo seznam Priporočeni programi.

- - -

Izberite Pregledovalnik slik in kliknite Nastavi kot privzet program.

-

V primeru da Pregledovalnik slik ni na seznamu Priporočeni programi, kliknite na Pokaži druge programe. Izberite Pregledovalnik slik s seznama, ki se pojavi, in kliknite nastavi kot privzet.

- - -

Kliknite Zapri.

- - - -

V prihodnje bo datoteka iste vrste ob dvokliku odprta v pregledovalniku slik.

- - diff -Nru eog-3.26.2/help/sl/desktop-background.page eog-3.27.90/help/sl/desktop-background.page --- eog-3.26.2/help/sl/desktop-background.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - Kako nastaviti svojo najljubšo sliko kot ozadje namizja. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Nastavitev trenutne slike kot ozadje namizja. -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

To bo hipno spremenilo vaše ozadje na sliko, ki jo gledate. Nato boste vprašani, če želite videz slike spremeniti z uporabo pogovornega okna možnosti ozadje. V primeru da kliknite Skrij, bo sporočilo izginilo.

- diff -Nru eog-3.26.2/help/sl/develop.page eog-3.27.90/help/sl/develop.page --- eog-3.26.2/help/sl/develop.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - Izboljšave pregledovalnika slik. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - -Besedilo pomoči -

Pregledovalnik slik vzdržuje skupnost prostovoljcev. Vabimo vas k sodelovanju.

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/sl/documentation.page eog-3.27.90/help/sl/documentation.page --- eog-3.26.2/help/sl/documentation.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - Pridružite se dokumentacijski ekipi - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - -Pomagajte pisati dokumentacijo - -

Dokumentacijo Pregledovalnika slik vzdržuje skupnost prostovoljcev. Vabimo vas k sodelovanju.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/sl/edit.page eog-3.27.90/help/sl/edit.page --- eog-3.26.2/help/sl/edit.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - -Urejanje ali izbris slike - -
Urejanje slike -

Pregledovalnik slik lahko uporabite za ogled slik, ne morete pa jih urejati. Za to morate uporabiti program za urejanje slik, kot je urejevalnik slik GIMP. Za odprtje slike za urejanje v drugem programu:

- - -

Click Open With, -or right-click on the image.

- - -

Izberite program, ki ga želite uporabljati za urejanje slik.

- - -

Ko ste končali z urejanjem, jo shranite in zaprite drug program.

- - -

Pregledovalnik slik bo zaznal, če je bila slika spremenjena, in vas bo vprašal, če jo želite ponovno naložiti.

- - -
- -
-Izbris slike -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/sl/flip-rotate.page eog-3.27.90/help/sl/flip-rotate.page --- eog-3.26.2/help/sl/flip-rotate.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - Navpično/vodoravno, v smeri/nasprotni smeri urinega kazalca - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Zrcaljenje ali vrtenje slik - -

V primeru da so vaše slike napačno obrnjene, jih lahko zrcalite ali zavrtite tako, da so videti prav.

- - -
-Zrcaljenje slike - -

Kliknite Uredi.

 -

Izberite zrcali vodoravno ali zrcali navpično.

 - -

If you want to keep the picture flipped in this way, click Save.

-

V nasprotnem primeru slike ne shranite in ob naslednjem odprtju bo vrnjena v izvirno usmeritev.

- - -
- -
-Vrtenje fotografije - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

V nasprotnem primeru slike ne shranite in ob naslednjem odprtju bo vrnjena v izvirno usmeritev.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Zavrti v smeri urinega kazalca

CtrlR

Zavrti v nasprotni smeri vrtenja urinega kazalca

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/sl/format-change.page eog-3.27.90/help/sl/format-change.page --- eog-3.26.2/help/sl/format-change.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,72 +0,0 @@ - - - - - - Slike lahko pretvorite iz ene vrste v drugo. Tako lahko naredite paketno za več slik. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - -Pretvorba v drugo vrsto datoteke - -

Slike so shranjene v posebnih vrstah kot sta JPEG ali PNG. Slike lahko pretvorite iz ene vrste v drugo.

- -
- Pretvorba ene slike v drugo vrsto datoteke - - -

Click Save As…. The -Save Image window will pop up.

- - -

V polju ime spremenite pripono datoteke v vrsto v katero želite pretvoriti svojo sliko. Pripona datoteke je del imena datoteke za piko.

-

Za pretvorbo slike JPEG (.jpg) v datoteko Bitmap (.bmp):

-

nova datoteka:slika.bmp

-

nova datoteka:slika.bmp

- - -

Kliknite Shrani in nova datoteka bo shranjena v novi vrsti. Stara datoteka (v stari vrsti) bo ostala kjer je in ne bo izbrisana.

- - - -

Pregledovalnik slik poskuša uganiti v kateri vrsti datotek naj shrani sliko na osnovi izbrane pripone datoteke. Če izbrane pripone datoteke ne prepozna ali če ne veste katere uporabiti, kliknite Podprte vrste slik v oknu Shranjevanje slike. To vam bo omogočilo izbiro vrste slike iz spustnega polja.

- -
- -
- Pretvorba več slik v drugo vrsto slik -

Slike lahko pretvorite iz ene vrste v drugo v enem koraku. To je uporabno, če želite pretvoriti veliko slik.

- - -

V galeriji slik pritisnite in držite tipko Ctrl in izberite slike, ki jih želite pretvoriti eno po eno. Namesto tega lahko pritisnite CtrlA za izbiro vseh slik.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

Pretvorjene slike bodo bile privzeto shranjene v trenutno mapo. V primeru da jih želite shraniti drugje, spremenite Ciljno mapo.

- - -

Izberite vrsto datoteke, v katero želite pretvoriti datoteke, iz spustnega menija desno od vnosnega polja Vrsta imena datoteke.

- - -

Kliknite Shrani.

- - -
- - diff -Nru eog-3.26.2/help/sl/formats-save.page eog-3.27.90/help/sl/formats-save.page --- eog-3.26.2/help/sl/formats-save.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP in drugi. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - Vrste podprte za shranjevanje slik -

Pregledovalnik slik lahko shrani slike v naslednje vrste slik:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

Glede na vašo nastavitev sistema boste morda lahko shranili druge vrste slik.

 - diff -Nru eog-3.26.2/help/sl/formats-view.page eog-3.27.90/help/sl/formats-view.page --- eog-3.26.2/help/sl/formats-view.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,40 +0,0 @@ - - - - - - - Pregledovalnik slik lahko prikaže slike v širokem obsegu vrst slik, vključno s PNG, JPEG in TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - Podprte vrste slik - -

Pregledovalnik slik lahko odpre naslednje vrste slik:

- -

ANI - Animacija

 -

BMP - Bitna slika

 -

GIF - Graphics Interchange Format

 -

ICO - Ikona Windows

 -

JPEG/JPG - Združena skupina strokovnjakov za fotografije

 -

PCX - PC slikarski čopič

 -

PNG - Prenosljiva omrežna grafika

 -

PNM - Prenosnik Anymap iz orodja PPM

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Vrsta datoteke označene slike

 -

WBMP - Brezžična bitna slika Bitmap

 -

XBM - X bitna slika

 -

XPM - X rastrska slika

 - -

V primeru da poskusite odpreti nepodprto vrsto, boste dobili napako Ni mogoče naložiti slike 'ime_slike'..

- diff -Nru eog-3.26.2/help/sl/index.page eog-3.27.90/help/sl/index.page --- eog-3.26.2/help/sl/index.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/sl/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Pomoč za Pregledovalnik slik Gnomeovo oko - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Pregledovalnik slik Gnomeovo oko - Pregledovalnik slik Gnomeovo oko - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- Ogled slik -
- -
- Urejanje slik -
- -
- Tiskanje slik -
- -
- Dodajanje dodatnih zmožnosti - -
-
- Napredno -
- -
- Pogosto zastavljena vprašanja -
- -
- Triki in namigi -
- -
- Vključite se -
- diff -Nru eog-3.26.2/help/sl/introduction.page eog-3.27.90/help/sl/introduction.page --- eog-3.26.2/help/sl/introduction.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ - - - - - - Dobrodošli v Pregledovalniku slik Gnomeovo oko. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Uvod - -

GNOME-ovo oko je pregledovalnik slik. Z njim si lahko ogledate slike skoraj katerekoli vrste. Upravlja lahko velike zbirke slik in lahko prikaže predstavitev. Izvajate lahko tudi osnovne spremembe slik kot so vrtenje ali zrcaljenje ali pretvarjanje v drugo vrsto slik.

- - diff -Nru eog-3.26.2/help/sl/legal.xml eog-3.27.90/help/sl/legal.xml --- eog-3.26.2/help/sl/legal.xml 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

To delo je licencirano pod To delo se razširja pod licenco CreativeCommons Attribution-Deljenje priznanje avtorstva 3.0 neprenosljivo..

-

Kot posebno izjemo vam dajejo lastniki avtorskih pravic dovoljenje za kopiranje, spreminjanje in distribuiranje kode primerov, ki jo vsebuje ta dokument pod vašimi pogoji, brez omejitev.

- diff -Nru eog-3.26.2/help/sl/license.page eog-3.27.90/help/sl/license.page --- eog-3.26.2/help/sl/license.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - - Pravni podatki - - - Dovoljenje -

To delo se razširja pod licenco CreativeCommons Attribution-Deljenje priznanje avtorstva 3.0 neprenosljivo.

-

Lahko:

- - - <em>Delite</em> -

Kopirata, distribuirate in priobčujete delo javnosti.

- - - <em>Predelate</em> -

Prilagodite delo.

- - -

Pod naslednjimi pogoji:

- - - <em>Priznanje avtorstva</em> -

Delo morate priznati na način, kot ga je navedel avtor ali lastnik licence (toda ne na način, ki predlaga, da podirajo vas ali vašo uporabo dela).

- - - <em>Deljenje pod enakimi pogoji</em> -

Če spremenite, prilagodite ali gradite na tem delu, lahko nastalo delo distribuirate le pod enako, podobno ali združljivo licenco.

- - -

Za polno besedilo licence si oglejte spletišče CreativeCommons, ali si preberite polno zavezo Commons.

- diff -Nru eog-3.26.2/help/sl/open.page eog-3.27.90/help/sl/open.page --- eog-3.26.2/help/sl/open.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Slike se odprejo v novem oknu. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Odpiranje slike - -

Slike bi se morale v pregledovalniku slik samodejno odpreti ob dvokliku v brskalniku datotek datoteke. Če to ni res, boste morda morali nastaviti pregledovalnik slik kot privzet program za ogled slik.

- -

Vsaka odprta slika se bo odprla v novem oknu pregledovalnika slik. Morda boste želeli v enem oknu videti več slik.

- -

Slike lahko odprete tudi iz pregledovalnika slik:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Izberite sliko, ki jo želite odpreti, in kliknite Odpri.

 - - - diff -Nru eog-3.26.2/help/sl/plugin-exif-digital.page eog-3.27.90/help/sl/plugin-exif-digital.page --- eog-3.26.2/help/sl/plugin-exif-digital.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,85 +0,0 @@ - - - - - - Ogled podatkov kot so nastvitve fotoaparata in histogram, geografsko mesto in datum. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Ogled podrobnih podatkov o sliki - -

Slike, posnete z digitalnim fotoaparatom so shranjene skupaj z dodatnimi podatki, ki so vstavljeni v njih kot so datum zajema, nastavitve osvetlite in v nekaterih predmetih celo mesto zajema slike.

- -

Ta tema vam prikazuje kako dostopati do teh podatkov.

- -
-Prikaz datuma v vrstici stanja - -

Datum zajema slike lahko prikažete v vrstici stanja na dnu okna.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Podrobni podatki Exif -

Podrobne informacije shranjene v digitalnih fotografijah se imenujejo podatki Exif. Vidite jih lahko z namestitvijo vstavka za pregledovalnik slik.

- - - -

Za dodajanje te zmožnosti boste morali namestiti paket eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

Nastavitve fotoaparata, ki so bile uporabljene za zajem fotografije lahko vidite tudi v vrstici stanja. Izberite Prikaz Exif na zavihku Vstavki in kliknite Možnosti. Izberite Prikaži nastavitve fotoaparata v stranski vrstici.

- - -
- -
- Pokaži zemljevid s položajem mesta, zajema fotografije -

Nekateri fotoaparati digitalnim fotografijam pripnejo podatke geograskega položaja. To so običajno koordinate GPS (zemljepisna dolžina in širina) mesta zajema slike..

- - - -

Za dodajanje te zmožnosti boste morali namestiti paket eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

Zemljevid vam bo pokazal mesto zajema slike le, če so podatki geografskega mesta priloženi sliki. Veliko fotoaparatov teh podatkov slikam ne priloži.

-
- - - diff -Nru eog-3.26.2/help/sl/plugin-fullscreen-background.page eog-3.27.90/help/sl/plugin-fullscreen-background.page --- eog-3.26.2/help/sl/plugin-fullscreen-background.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Omogoči spremembo barve ozadja v celozaslonskem načinu. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Sprememba barve ozadja v celozaslonskem načinu - -

Če želite, lahko spremenite barvo ozadja v celozaslonskem načinu.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Sedaj ko ste v celozaslonskem načinu, bo barva ozadja barva, ki ste jo izbrali.

- -

Za dodajanje te zmožnosti boste morali namestiti paket eog-plugins.

- - diff -Nru eog-3.26.2/help/sl/plugin-fullscreen-double-click.page eog-3.27.90/help/sl/plugin-fullscreen-double-click.page --- eog-3.26.2/help/sl/plugin-fullscreen-double-click.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - Omogočitev celozaslonskega načina z dvojnim klikom na sliko. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Celozaslonski način z dvojnim klikom miške - - - -

Če želite, lahko nastavite, da so slike prikazane v celozaslonskem načinu, ko jih dvokliknete v pregledovalniku slik.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Ko je slika omogočena, bo dvoklik na sliko preklopil med načinoma celega zaslona in okenskega načina.

- - diff -Nru eog-3.26.2/help/sl/plugin-picasa.page eog-3.27.90/help/sl/plugin-picasa.page --- eog-3.26.2/help/sl/plugin-picasa.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - Enostavno pošiljajte slike na PicasaWeb neposredno iz Pregledovalnika slik. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Pošiljanje fotografij na <app>PicasaWeb</app> - -

PicasaWev je storitev albuma fotografij, ki vam omogoča deljenje slik na spletu. Dodate lahko gumb bližnjice, ki zagotavlja priročen način za pošiljanje slik na PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

Za dodajanje te zmožnosti boste morali namestiti paket eog-plugins.

- - diff -Nru eog-3.26.2/help/sl/plugin-python-console.page eog-3.27.90/help/sl/plugin-python-console.page --- eog-3.26.2/help/sl/plugin-python-console.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - Konzolo Python lahko uporabite za dodajanje dodatnih zmožnosti in poganjanje skriptov v pregledovalniku slik. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Konzola python - -

Pregledovalnik slik ima sistem vstavkov, ki uporablja skriptni jezik Python. Če konzolo Python omogočite, lahko dobite neposreden dostop do tolmača Python iz pregledovalnika slik, ki ga lahko nato uporabite za pisanje skriptov ali programersko upravljanje slik.

- - - -

Za dodajanje te zmožnosti boste morali namestiti paket eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Izberite Konzola Python in kliknite Zapri.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/sl/plugin-send-by-mail.page eog-3.27.90/help/sl/plugin-send-by-mail.page --- eog-3.26.2/help/sl/plugin-send-by-mail.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ - - - - - - Enostavno pošiljanje slik s pripenjanjem novi e-pošti. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Pošiljanje slik po e-pošti - -

Dodate lahko gumb, ki zagotavlja priročen način za pošiljanje slik preko e-pošte.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

Za dodajanje te zmožnosti boste morali namestiti paket eog-plugins.

- - -

Da to deluje, mora biti pošta Evolution nastavljena za povezavo z vašim računom e-pošte.

- - - - - diff -Nru eog-3.26.2/help/sl/plugin-slideshow-shuffle.page eog-3.27.90/help/sl/plugin-slideshow-shuffle.page --- eog-3.26.2/help/sl/plugin-slideshow-shuffle.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - - Prikaz fotografij v naključnem redu ob predvajanju predstavitve. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Predstavitev s premešanimi slikami - -

Sedaj bodo pri ogledu slik v načinu predstavitev le te naključno premešane.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

Za dodajanje te zmožnosti boste morali namestiti paket eog-plugins.

- - diff -Nru eog-3.26.2/help/sl/plugins.page eog-3.27.90/help/sl/plugins.page --- eog-3.26.2/help/sl/plugins.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,76 +0,0 @@ - - - - - - Namestite vstavke za dostop do dodatnih zmožnosti. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Vstavki - -

Namestite lahko paket eog-plugins vsebuje zbirko dodatnih vstavkov za pregledovalnik slik. Vstavki dodajo dodatne zmožnosti.

- - -

Paket eog-plugins lahko namestite z upravljalnikom paketov svoje distribucije Linuxa.

- - - -

namestite eog-plugins

- - - - -

V paketu eog-plugins so vključeni naslednji vstavki:

- - - -

Datum v vrstici stanj: prikaže datum slike v vrstici stanja okna.

- - -

Prikaz Exif: prikaže nastavitve fotoaparata in histograme za digitalne fotografije.

- - -

Ozadje v celozaslonskem načinu: omogoči spreminjanje ozadja v celozaslkonskem načinu.

- - -

Celozaslonski način z dvojnim klikom: omogočite celozaslonski način z dvojnim klikom.

- - -

Zemljevid: prikaže zemljepisno mesto slike na zemljevidu.

- - -

Pošiljalnik PicasaWeb: pošljite svoje slike na PicasaWeb.

- - -

Konzola Python: konzola skriptanja Python za pregledovalnik slik.

- - -

Pošlji po pošti: pošlje sliko prijatelju s prilaganjem novi e-pošti.

- - -

premešaj predstavitev: premeša slike v načinu predstavitve.

- - -

Približaj do prileganja širini slike: prilagodi približanje, da se slika po širini prilega oknu.

- - - - -

Svoje vstavke lahko upravljate v zavihku vstavkov v oknu Možnosti.

- - - diff -Nru eog-3.26.2/help/sl/plugin-zoom-width.page eog-3.27.90/help/sl/plugin-zoom-width.page --- eog-3.26.2/help/sl/plugin-zoom-width.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Prilagodi približanje tako, da se slika po širini prilega oknu. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Približaj do prilagojena širini slike - -

Omogočite vstavek Približanje do prileganja širini slike, če želite, da so slike razširjene do polne širine okna.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

Za dodajanje te zmožnosti boste morali namestiti paket eog-plugins.

- - diff -Nru eog-3.26.2/help/sl/preferences.page eog-3.27.90/help/sl/preferences.page --- eog-3.26.2/help/sl/preferences.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,89 +0,0 @@ - - - - - - Pogled slike, predstavitev in vstavki. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Možnosti -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Možnosti ogleda slike - - - - Izboljšave slik -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

Če omogočite Samodejno usmeritev, bodo slike samodejno zavrtene glede na njihove metapodatke Exif. To so podatki o sliki, ki jih digitalni fotoaparat samodejno vstavi in lahko vsebujejo podrobnosti o tem kako je bil fotoaparat obrnjen ob zajemu slike. Če je samodejna usmeritev omogočena, so fotografije portretov samodejno zavrtene navzgor. Vrtenje ni shranjeno dokler zavrtene slike ne shranite.

-

Samodejna usmeritev ne dela z vsemi slikami. Zavrtene bodo le slike, posnete s fotoaparatom, ki podpira metapodatke usmeritve Exif.

- - - Prozorni deli -

Izberite eno od naslednjih možnosti za določitev kako so prikazani prozorni deli slike:

- - -

Kot vzorec šahovnice:

-

Prikaže prozorne dele slike kot karirast vzorec.

- - -

Kot barvo po meri:

-

Prikaže prozorne dele slike v barvi, ki jo navedete. Za izbor barve kliknite na izbirni gumb.

- - -

Kot ozadje:

-

Prikaže morebitne prozorne dele slike v barvi Ozadja, če je pod Ozadje izbrano Kot barva po meri. Sicer je uporabljena privzeta barva ozadja.

- - - - -
- - -
-Možnosti predstavitve - -

Za prilagodite nastavitev predstavitve:

- - -

Pod Približanje slike lahko izberete, če želite sliko razširiti do prileganja zaslonu.

- - -

Pod Zaporedje lahko izberete koliko sekund naj bo prikazana posamezna slika (med 1 in 100).

- - -

Izberite Zaporedje zanke, če želite, da se predstavitev stalno ponavlja. V primeru da možnost ni izbrana, se bo predstavitev začela pri izbrani sliki in končala z zadnjo sliko v mapi.

- - -
- - -
-Možnost vstavka - - - - -

Tukaj lahko izberete/odstranite izbiro dodatnih možnosti, ki jih želite omogočiti/onemogočiti. Slika na levi prikazuje vstavke, ki so privzeto na voljo.

- -

Namestite lahko tudi paket eog-plugins, ki vsebuje vstavke, ki zagotavljajo številne dodatne zmožnosti. Po namestitvi boste lahko izbrali dodatne vstavke kot so tisti prikazani na sliki na desni.

-
- - diff -Nru eog-3.26.2/help/sl/print.page eog-3.27.90/help/sl/print.page --- eog-3.26.2/help/sl/print.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Tiskanje slike - -

Za tisk slike, ki si jo trenutno ogledujete:

- - - -

Click Print….

- - -

Izberite zavihek Splošno. Izberite tiskalnik, ki ga želite uporabiti in število kopij, ki jih želite natisniti.

- - -

Izberite zavihek Nastavitve slike. Tukaj lahko prilagodite Položaj in Velikost slike.

-

Položaj slike na strani lahko spremenite tako, da sliko povlečete naokoli v predogledu.

- - -

Če uporabljate foto papir visoke kakovosti, pojdite v zavihek Nastavitev strani in izberite pravo Vrsto papirja. Pojdite tudi v zavihek Kakovost slike in izberite visoko kakovost, da dobite najboljšo možno kakovost fotografije.

- - -

Kliknite Natisni.

- - - -

Nekateri od zavihkov omenjeni zgoraj za določene modele tiskalnikov niso prisotni. To se zgodi, ker gonilniki za tiskalnike ne omogočajo spremembe nekaterih nastavitev. Če na primer ne vidite zavihka Kakovost slike, to verjetno pomeni, da gonilniki tiskalnika teh nastavitev ne podpirajo.

- - diff -Nru eog-3.26.2/help/sl/rename-multiple.page eog-3.27.90/help/sl/rename-multiple.page --- eog-3.26.2/help/sl/rename-multiple.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - - Samodejno paketno preimenovanje in oštevilčenje slik. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Preimenovanje več slik hkrati - -

Če želite preimenovati veliko slik tako da imajo oštevilčeno obliko imena:

- - - -

Odprite galerijo slik s pritiskom na F9.

- - -

V galeriji slik izberite vse slike, ki jih želite preimenovati s pritiskom na tipko Ctrl in klikom na vsako od slik.

-

Namesto tega lahko za izbiro vseh slik pritisnete tudi CtrlA.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

Preimenovane slike bodo bile privzeto shranjene v trenutni mapi. Za shranjevanje drugje v spustnem meniju Ciljna mapa izberite mesto za shranjevanje.

- - -

Uporabite polje Oblika imena datoteke za izbiro oblike poimenovanja slik. Predogled imena datoteke vam pokaže kako bodo videti nova imena datotek. Oglejte si odsek spodaj za nasvet kako preimenovati datoteke.

- - -

Prepričajte se, da je vrednost spustnega polja Vrsta datoteke kot je, razen če pretvarjate slike v drugo vrsto datotek.

- - -

Kliknite Shrani kot in slike bodo preimenovane.

- - - - - -
- Izbira oblike imena datoteke -

Imena datotek preimenovanih datotek so določena z vsebino polja Oblika imena datoteka.

- - -

Izvirno ime datoteke lahko obdržite tako, da kot del novega imena datoteke obdržite %f.

-

Če na primer v polje Oblika imena datoteke vnesete pariz_%f, bodo slike roža.jpg, hiša.jpg in mucek.jpg preimenovane v pariz_roža.jpg, pariz_hiša.jpg in pariz_mucek.jpg.

- - -

Dodajanje %n bo vaše slike zaporedno oštevilčilo. Začelo se bo pri številu, ki ste ga izbrali v Možnostih.

-

Če na primer v polje Oblika imena datoteke vnesete sonce_%n, bodo slike roža.jpg, hiša.jpg in mucek.jpg preimenovane v sonce_2.jpg, sonce_3.jpg in sonce_1.jpg. (Urejene bodo po abecednem redu izvirnih imen datotek).

- - -
- - diff -Nru eog-3.26.2/help/sl/shortcuts.page eog-3.27.90/help/sl/shortcuts.page --- eog-3.26.2/help/sl/shortcuts.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,156 +0,0 @@ - - - - - - Seznam vseh tipkovnih bližnjic. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - -Tipkovne bližnice - -

To je seznam vseh tipkovnih bližnjic, ki jih lahko uporabite v pregledovalniku slik.

- -
- Odpiranje, zapiranje, shranjevanje in tiskanje - - - - - - - - - - - - - - - - - - - - - - - - - -

Odpri slikovne datoteke

CtrlO

Shrani sliko z istim imenom datoteke

CtrlS

Shrani kopijo trenutne slike z novim imenom datoteke

ShiftCtrlS

Natisne trenutno sliko

CtrlP

Zapri trenutno okno

CtrlW

Nastavitev slike kot ozadja namizja.

CtrlF8

-
- -
- Ogled slik - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Gre na predhodno sliko v mapi

Back space / Levo

Gre na naslednjo sliko v mapi

Preslednica / Desno

Gre na prvo sliko v mapi

AltHome

Gre na zadnjo sliko v mapi

AltEnd

Izbere naključno sliko v mapi

CtrlM

Ogled galerije slik

F9

Celozaslonski pogled

F11

Ogled predstavitve

F5

Dejanska velikost

Ctrl0 (nič)

Najboljše prileganje

F

Drsanje po veliki sliki

Altsmerne tipke

-
- -
- Kopira sliko za lepljenje v drug program - - - - - -

Kopiraj

CtrlC

-
- -
- Približanje in vrtenje - - - - - - - - - - - - - - - - - -

Približaj

+

Oddalji

-

Zavrti v smeri urinega kazalca

CtrlR

Zavrti v nasprotni smeri urinega kazalca

ShiftCtrlR

-
- -
- Drugo - - - - - - - - - - - - - - - - - -

Pogled stranskega pulta

CtrlF9

Pogled lastnosti slike

AltReturn

Razveljavi

CtrlZ

Pomoč

F1

-
- diff -Nru eog-3.26.2/help/sl/slideshow.page eog-3.27.90/help/sl/slideshow.page --- eog-3.26.2/help/sl/slideshow.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/sl/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Predstavitev - -

Za ogled vseh slik v mapi kot predstavitv:

- - - -

Odprite eno od slik iz mape.

- - -

Click Slideshow or press - F5.

-

Celozaslonska predstavitev se bo začela. Vsakih nekaj sekund bo prikazana nova slika. Če se želite med slkami premikati hitreje ali se vrniti na sliko, ki je bila že prikazana, lahko za ročen premik slike naprej in nazaj uporabite tipki puščic Levo in Desno.

- - -

Za končanje predstavitve pritisnite Esc ali F5.

- - - -

Nastavitve predstavitve lahko spremenite. Na primer kako dolgo naj bo prikazana vsaka slika. Za več podrobnosti si oglejte temo o možnostih predstavitve.

- - diff -Nru eog-3.26.2/help/sl/translate.page eog-3.27.90/help/sl/translate.page --- eog-3.26.2/help/sl/translate.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/sl/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ - - - - - - Prevajanje pregledovalnika slik. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - -Pomagajte prevajati -

Pregledovalnik slik in njegovo dokumentacijo prevaja skupnost prostovoljcev. Vabimo vas k sodelovanju.

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

S prevajalci GNOME se lahko pogovarjate s pomočjo omrežjairc. Ljudje na kanalu prihajajo s celega sveta zato zaradi časovne razlike odziva ne boste dobili nemudoma.

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/sl/view.page eog-3.27.90/help/sl/view.page --- eog-3.26.2/help/sl/view.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/sl/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ - - - - - - Pritisnite Levo in Desno za premikanje med slikami ali pa uporabite galerijo slik za prikaz vseh slik. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - -Ogled vseh slik v mapi - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Brskanje po slikah v mapi -

Če imate mapo, ki vsebuje več slik, lahko priročno brskate med vsemi slikami ne da bi jih morali posamezno odpirati.

- - -

Odprite eno od slik iz mape v kateri želite brskati.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

Za vrnite v običajni pogled pritisnite Esc ali F11.

- - -
- - - - diff -Nru eog-3.26.2/help/sl/zoom.page eog-3.27.90/help/sl/zoom.page --- eog-3.26.2/help/sl/zoom.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/sl/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Dovoljenje Creative Commons - deljenje pod istimi pogoji 3.0

- - - - -Približanje - -

Sliko lahko približate in oddaljite in s tem dosežete, da prikažete več ali manj slike naenkrat. To je uporabno, če želite videti celotno sliko ali če želite preučiti fine podrobnosti slike.

- - - -

Raven približanja lahko spremenite z miškinim koleščkom. Drsajte navzgor za približanje in navzdol za oddaljevanje.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Prilagajanje do najboljšega prilaganja oknu -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/sv/bug-filing.page eog-3.27.90/help/sv/bug-filing.page --- eog-3.26.2/help/sv/bug-filing.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Rapportera ett fel i bildvisaren. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons DelaLika 3.0

- - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Rapportera ett fel med bildvisaren -

Bildvisare underhålls av en frivillig gemenskap. Du är välkommen att deltaga.

- -

Om du upplever problem med bildvisaren (t.ex. om den kraschar eller beter sig på ett oväntat sätt), eller om den saknar någon funktion som du tycker att den borde ha, rapportera en felrapport genom att klicka på länken . Felrapporter är sättet på vilket programutvecklare håller reda på problem så att de kan åtgärda dem.

-

För att deltaga måste du ha ett konto som ger dig möjlighet att rapportera fel och göra kommentarer. Du måste också registrera dig så att du kan få uppdateringar via e-post om tillståndet för din felrapport. Om du inte redan har ett konto, klicka bara på länken New Account för att skapa ett.

-

När du har ett konto, logga in och klicka på File a BugCoreeog. Innan du rapporterar ett fel, läs igenom riktlinjer för att skriva felrapporter, och bläddra genom existerande felrapporter för att se om den redan finns.

-

För att rapportera ett fel, välj komponenten i menyn Component. Om du inte är säker på vilken komponent ditt fel rör, välj general.

-

Om du önskar en ny funktion, välj enhancement i menyn Severity. Fyll i avsnitten sammanfattning och beskrivning och klicka på Submit Bug.

-

Din rapport kommer att få ett ID-nummer och dess status kommer att uppdateras allt eftersom den hanteras. Fel kan ta ett tag att åtgärda och programutvecklarna kan begära vidare information för att hjälpa dem att reda ut vad problemet är.

- diff -Nru eog-3.26.2/help/sv/commandline.page eog-3.27.90/help/sv/commandline.page --- eog-3.26.2/help/sv/commandline.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,73 +0,0 @@ - - - - - - Kommandorad - Kommandot eog kan öppna ett antal bilder i olika lägen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Kommandoraden - -

För att starta Bildvisare från Terminalen, skriv eog.

-

Du kan öppna en specifik fil genom att skriva filnamnet efter kommandot eog:

-eog bild.jpeg -

Du kan öppna en specifik mapp genom att skriva in mappnamnet efter kommandot eog:

-eog mapp -

För att se alla bilderna i en mapp på en gång kan du behöva bläddra genom bildgalleriet.

- -
- Öppna en bild i helskärmsläge - eog --fullscreen bild.jpeg -
- -
- Öppna en bild i en ny instans - eog --new-instance bild.jpeg -
-
- Öppna en mapp i bildspelsläge - eog --slide-show Bilder/ -
- diff -Nru eog-3.26.2/help/sv/copy-paste.page eog-3.27.90/help/sv/copy-paste.page --- eog-3.26.2/help/sv/copy-paste.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - - - Hur man kopierar/klistrar in från bildvisaren in i andra program. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Kopiera och klistra in en bild -

För att kopiera en bild från bildvisaren in i ett annat program, högerklicka på bilden och välj Kopiera.

- -

Bilden har kopierats till urklipp och kan nu klistras in i ett LibreOffice-dokument, en Gimp-bild eller något annat program.

- - diff -Nru eog-3.26.2/help/sv/default.page eog-3.27.90/help/sv/default.page --- eog-3.26.2/help/sv/default.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - Gör bildvisaren till standardprogrammet för att visa bilder. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Öppna bilder i bildvisaren som standard -

Om du vill göra bildvisaren till standardprogrammet som öppnar vissa bildfilstyper:

- - - -

I Filer, högerklicka på filen och välj Egenskaper.

- - -

Gå till fliken Öppna med. En lista över Rekommenderade program kommer att visas.

- - -

Välj Bildvisare och klicka på Ange som standard.

-

Om Bildvisare inte finns i listan Rekommenderade program, klicka på Visa andra program. Välj Bildvisare från listan som visas och klicka på Ange som standard.

- - -

Klicka på Stäng.

- - - -

I framtiden när du dubbelklickar på en fil av samma typ kommer den att öppnas i bildvisaren.

- - diff -Nru eog-3.26.2/help/sv/desktop-background.page eog-3.27.90/help/sv/desktop-background.page --- eog-3.26.2/help/sv/desktop-background.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - Ställ in din favoritbild som din bakgrundsbild/skrivbordsunderlägg. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Gör den aktuella bilden till din skrivbordsbakgrund -

För att ställa in bilden som du för närvarande tittar på som bakgrundsbild på ditt skrivbord, klicka på Använd som skrivbordsunderlägg.

- -

Detta kommer omedelbart att ändra bakgrunden till bilden du tittar på. Du kommer sedan att tillfrågas om du vill modifiera bildens utseende via inställningsfönstret bakgrund. Om du klickar på Dölj kommer meddelandet att försvinna.

- diff -Nru eog-3.26.2/help/sv/develop.page eog-3.27.90/help/sv/develop.page --- eog-3.26.2/help/sv/develop.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,46 +0,0 @@ - - - - - - Förbättra Bildvisare - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons DelaLika 3.0

- - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Hjälp till att utveckla -

Bildvisare utvecklas och underhålls av en frivillig gemenskap. Du är välkommen att deltaga.

-

Om du skulle vilja hjälpa till att utveckla Bildvisare kan du komma i kontakt med utvecklarna via irc eller via vår sändlista.

- - diff -Nru eog-3.26.2/help/sv/documentation.page eog-3.27.90/help/sv/documentation.page --- eog-3.26.2/help/sv/documentation.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ - - - - - Gå med i dokumentationsgruppen. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons DelaLika 3.0

- - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Hjälp till att skriva dokumentation - -

Dokumentationen för Bildvisare underhålls av en frivillig gemenskap. Du är välkommen att deltaga.

- -

För att bidra till Dokumentationsprojektet, tag kontakt med oss via irc eller via vår sändlista.

-

Vår wiki-sida innehåller användbar information.

- - - diff -Nru eog-3.26.2/help/sv/edit.page eog-3.27.90/help/sv/edit.page --- eog-3.26.2/help/sv/edit.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,71 +0,0 @@ - - - - - - Klicka på Öppna med för att redigera en bild med en extern bildredigerare. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - -Redigera eller ta bort en bild - -
Redigera en bild -

Bildvisaren kan endast användas för att visa bilder, den kan inte redigera dem. För att göra det måste du använda ett bildredigeringsprogram, så som bildredigeraren GIMP. För att öppna en bild för redigering i ett annat program:

- - -

Klicka på Öppna med eller högerklicka på bilden.

- - -

Välj programmet du vill använda för att redigera bilden.

- - -

När du är färdig med redigeringen, spara den och stäng det andra programmet.

- - -

Bildvisare kommer att upptäcka att bilden har ändrats och kommer att läsa in den på nytt.

- - -
- -
-Ta bort en bild -

För att ta bort en bild som du inte längre vill ha, högerklicka på bilden och välj Flytta till papperskorgen.

-
- - diff -Nru eog-3.26.2/help/sv/flip-rotate.page eog-3.27.90/help/sv/flip-rotate.page --- eog-3.26.2/help/sv/flip-rotate.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,85 +0,0 @@ - - - - - - Horisontell/vertikal, medurs/moturs - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Vänd eller rotera bilder - -

Om dina bilder har fel sida upp eller är spegelvända kan du vända eller rotera dem så att de se rätt ut.

- - -
-Vänd en bild - -

Klicka på Redigera.

 -

Välj antingen Vänd horisontellt eller Vänd vertikalt.

 - -

Om du vill behålla bilden vänd på detta sätt, klicka på Spara.

-

Annars, spara inte bilden så kommer den att återgå till dess ursprungliga orientering nästa gång du öppnar den.

- - -
- -
-Rotera en bild - -

Flytta musmarkören över bilden. Två knappar med pilar kommer att synas längst ned.

 -

Välj antingen Rotera bilden 90 grader åt vänster eller Rotera bilden 90 grader åt höger.

 - -

Om du vill behålla bilden roterad på detta sätt, klicka på Spara.

-

Annars, spara inte bilden så kommer den att återgå till dess ursprungliga orientering nästa gång du öppnar den.

- - - -

Du kan också använda tangentbordsgenvägarna:

- - - - - - - - - - -

Rotera medurs

CtrlR

Rotera moturs

SkiftCtrlR

- -
- diff -Nru eog-3.26.2/help/sv/format-change.page eog-3.27.90/help/sv/format-change.page --- eog-3.26.2/help/sv/format-change.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,94 +0,0 @@ - - - - - - Du kan konvertera bilder från ett bildformat till ett annat. Du kan göra detta satsvis för flera bilder. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Konvertera till ett annat filformat - -

Bilder sparas i ett visst filformat så som JPEG eller PNG. Du kan konvertera från ett filformat till ett annat.

- -
- Konvertera en enstaka bild till ett annat filformat - - -

Klicka på Spara som…. Fönstret Spara bild kommer att visas.

- - -

I namnfältet, ändra filändelsen till filformatet du vill konvertera bilden till. Filändelsen är delen av filnamnet efter punkten.

-

För att till exempel konvertera en JPEG (.jpg) till en Bitmap-fil (.bmp):

-

originalfil: bild.jpg

-

ny fil: bild.bmp

- - -

Klicka på Spara så kommer en ny fil att sparas i det nya formatet. Den gamla filen (i det gamla formatet) kommer att behållas där den fanns och kommer inte att tas bort.

- - - -

Bildvisaren försöker att gissa vilka filformat som en bild ska sparas i baserat på filändelsen du väljer. Om den inte känner igen filändelsen du skriver in eller om du inte vet vilken du ska välja, klicka på Bildfiler som stöds i fönstret Spara bild. Detta låter dig välja filformatet från en rullgardinslista.

- -
- -
- Konvertera flera bilder till ett annat format -

Du kan konvertera ett antal bilder från ett filformat till ett annat i en operation. Detta är användbart om du har många bilder som behöver konverteras.

- - -

I bildgalleriet tryck och håll ner Ctrl-tangenten och välj bilderna du vill konvertera en och en. Alternativt tryck på CtrlA för att välja alla bilder.

- - -

Kicka på Spara som…. Ett fönster kommer att visas (se nedan).

- - - -

De konverterade bilderna kommer att sparas i den aktuella mappen som standard. Om du vill spara dem någon annanstans, ändra Målmappen.

- - -

Välj filformatet du vill konvertera bilderna till från rullgardinslistan till höger om rutan Filnamnsformat.

- - -

Klicka på Spara.

- - -
- - diff -Nru eog-3.26.2/help/sv/formats-save.page eog-3.27.90/help/sv/formats-save.page --- eog-3.26.2/help/sv/formats-save.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - JPEG, PNG, BMP och övriga. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - - Format som stöds vid sparning av bilder -

Bildvisaren kan spara bilder i följande format:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

Det kan vara möjligt att spara i andra bildformat beroende på systemkonfiguration.

 - diff -Nru eog-3.26.2/help/sv/formats-view.page eog-3.27.90/help/sv/formats-view.page --- eog-3.26.2/help/sv/formats-view.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ - - - - - - - Bildvisaren kan visa bilder i ett stort antal format, inklusive PNG, JPEG och TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - - Bildformat som stöds - -

Bildvisaren kan öppna följande format:

- -

ANI - Animation

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Windows Icon

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap från PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

Om du försöker öppna en bild i ett format som inte stöds kommer du att få felet Kunde inte läsa in bilden ”bildnamn”.

- diff -Nru eog-3.26.2/help/sv/index.page eog-3.27.90/help/sv/index.page --- eog-3.26.2/help/sv/index.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ - - - - - Handbok för Eye of GNOME bildvisare. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME bildvisare - Eye of GNOME bildvisare - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> Eye of GNOME bildvisare -
- Visa bilder -
- -
- Redigera bilder -
- -
- Skriv ut bilder -
- -
- Lägg till extra funktioner - -
-
- Avancerat -
- -
- Ofta ställda frågor -
- -
- Tips och trick -
- -
- Hur man deltar -
- diff -Nru eog-3.26.2/help/sv/introduction.page eog-3.27.90/help/sv/introduction.page --- eog-3.26.2/help/sv/introduction.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ - - - - - - Välkommen till Eye of GNOME bildvisare. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Introduktion - -

Eye of GNOME är en bildvisare. Med den kan du visa bilder i nästan alla format. Den kan hantera stora samlingar av bilder och kan visa ett bildspel. Du kan också göra grundläggande ändringar i bilder så som att rotera eller vända dem eller konvertera dem till ett annat filformat.

- - diff -Nru eog-3.26.2/help/sv/legal.xml eog-3.27.90/help/sv/legal.xml --- eog-3.26.2/help/sv/legal.xml 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ - - -

Detta verk är licensierat under licensen Create Commons Erkännande-DelaLika 3.0 USA.

-

Som ett speciellt undantag, ger upphovsrättsinnehavarna dig tillåtelse att kopiera, modifiera och distribuera exempelkoden som finns i detta dokument under de villkor som du väljer, utan restriktioner.

- diff -Nru eog-3.26.2/help/sv/license.page eog-3.27.90/help/sv/license.page --- eog-3.26.2/help/sv/license.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,59 +0,0 @@ - - - - - - - Juridisk information. - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - - Licens -

Detta verk distribueras under licensen Create Commons Erkännande-DelaLika 3.0 Unported.

-

Du har rätt:

- - - <em>Att dela</em> -

Att kopiera, distribuera och överföra verket.

- - - <em>Att remixa</em> -

Att anpassa verket.

- - -

På följande villkor:

- - - <em>Erkännande</em> -

Du måste ge upphovsmannen eller licensgivaren erkännande på det sätt som begärts (men inte på ett sätt som antyder att de stödjer dig eller din användning av verket).

- - - <em>Dela lika</em> -

Om du förändrar, transformerar eller bygger vidare på detta verk, så får du distribuera det resulterande verket endast under samma, liknande eller en kompatibel licens.

- - -

För den fullständiga texten för licensen, se vidare CreativeCommons webbplats, eller läs det fullständiga Commons-kontraktet.

- diff -Nru eog-3.26.2/help/sv/open.page eog-3.27.90/help/sv/open.page --- eog-3.26.2/help/sv/open.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,55 +0,0 @@ - - - - - - Bilder öppnas i ett nytt fönster. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - - -Öppna en bild - -

Bilder bör automatiskt öppnas i bildvisaren när du dubbelklickar på dem i filhanteraren Filer. Om detta inte är fallet kan du behöva göra bildvisaren till standardprogrammet för att visa bilder.

- -

Varje bild du dubbelklickar på kommer att öppnas i ett nytt fönster som standard men du kan visa flera bilder i ett fönster om du vill.

- -

Du kan också öppna bilder inifrån bildvisaren själv:

- -

Klicka på Öppna… (eller tryck CtrlO). Fönstret Öppna bild kommer att visas.

 -

Välj bilden du vill öppna och klicka på Öppna.

 - - - diff -Nru eog-3.26.2/help/sv/plugin-exif-digital.page eog-3.27.90/help/sv/plugin-exif-digital.page --- eog-3.26.2/help/sv/plugin-exif-digital.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,99 +0,0 @@ - - - - - - Visa information så som kamerainställningar och histogram, geografisk plats och datum. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Visa detaljerad information om en bild - -

Bilder som tagits av digitalkameror lagras med en uppsjö extra information inbäddad, så som datum då bilden togs, vilka exponeringsinställningar som användes i kameran och i vissa fall till och med var bilden togs.

- -

Detta ämne visar hur du får tillgång till denna information.

- -
-Visa datum i statusraden - -

Du kan visa det datum som en bild togs i statusraden längst ner i fönstret.

-

För att göra detta, öppna programmenyn i systemraden, klicka på Inställningar och gå till fliken Insticksmoduler. Kryssa sedan i Datum i statusraden.

-
- -
- Detaljerad Exif-data -

Den detaljerade information som lagras med digitala foton kallas Exif-data. Du kan visa den genom att installera en insticksmodul för bildvisaren.

- - - -

För att aktivera denna funktion måste du ha eog-plugins installerat.

- - -

Om eog-plugins är installerat, öppna programmenyn i systemraden och klicka på Inställningar. Kryssa sedan i Exif-visning och stäng dialogen.

- - -

Aktivera Sidopanel för att visa kamerainställningarna som användes när fotot togs. För att också visa histogram som visar färgbalans och högdagrar/skuggor i bilden, välj Exif-visning i fliken Insticksmoduler och klicka på Inställningar. Kryssa i histogrammen som du vill visa, listade under Histogram.

- - -

Du kan också visa kamerainställningarna som användes då fotot togs i statusraden. Välj Exif-visning i fliken Insticksmoduler och klicka på Inställningar. Kryssa i Visa kamerainställningar i statusrad.

- - -
- -
- Visa en platskarta för foton -

Vissa kameror kan bifoga geografisk platsinformation (geotaggar) med digitala foton. Geotaggar är vanligtvis helt enkelt GPS-koordinaterna (latitud och longitud) för platsen där fotot togs.

- - - -

För att aktivera denna funktion måste du ha eog-plugins installerat.

- - -

Om eog-plugins är installerat, öppna programmenyn i systemraden, klicka på Inställningar och gå till fliken Insticksmoduler. Kryssa sedan i Karta och stäng dialogen.

- - -

Aktivera Sidopanel för att visa kartan.

- - -

Kartan kommer att visa platsen där en bild togs endast om det finns geografisk platsinformation bifogad med fotot. Många kameror bifogar inte geografisk platsinformation med bilder.

-
- - - diff -Nru eog-3.26.2/help/sv/plugin-fullscreen-background.page eog-3.27.90/help/sv/plugin-fullscreen-background.page --- eog-3.26.2/help/sv/plugin-fullscreen-background.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Möjliggör att ändra bakgrundsfärg i helskärmsläge. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Ändra bakgrundsfärg i helskärmsläge - -

Om du vill kan du ändra bakgrundsfärgen i helskärmsläge.

- -

För att göra detta, öppna programmenyn i systemraden, klicka på Egenskaper och gå till fliken Insticksmoduler. Klicka sedan på Helskärmsbakgrund och klicka på Inställningar. Välj färgen du vill ha i helskärmsläge och stäng dialogen.

- -

Nu kommer bakgrundsfärgen i helskärmsläget att vara den du valt.

- -

För att aktivera denna funktion måste du ha eog-plugins installerat.

- - diff -Nru eog-3.26.2/help/sv/plugin-fullscreen-double-click.page eog-3.27.90/help/sv/plugin-fullscreen-double-click.page --- eog-3.26.2/help/sv/plugin-fullscreen-double-click.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Aktivera helskärmsläge genom att dubbelklicka på en bild. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Helskärmsläge via dubbelklick - - - -

Om du vill kan du få bilder att visas i helskärmsläge när du dubbelklickar på dem i bildvisaren.

- -

För att göra detta, öppna programmenyn i systemraden, klicka på Inställningar och gå till fliken Insticksmoduler. Klicka sedan på Helskärm med dubbelklick och stäng dialogen.

- -

Nu kommer dubbelklickande på en bild att växla mellan helskärmsläge och normalt (fönster-)läge.

- - diff -Nru eog-3.26.2/help/sv/plugin-picasa.page eog-3.27.90/help/sv/plugin-picasa.page --- eog-3.26.2/help/sv/plugin-picasa.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,52 +0,0 @@ - - - - - - Skicka enkelt upp bilder till PicasaWeb direkt från Bildvisaren. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Skicka upp foton till <app>PicasaWeb</app> - -

PicasaWeb är en fotoalbumtjänst som låter dig dela bilder med människor på nätet. Du kan lägga till en genvägsknapp som ger dig ett enkelt sätt att skicka upp bilder till PicasaWeb.

- -

För att göra detta, öppna programmenyn i systemraden, klicka på Inställningar, gå till fliken Insticksmoduler och kryssa i Skicka till Picasa Web.

-

Detta kommer att ge dig ett praktiskt menyobjekt Skicka upp till PicasaWeb.

- -

För att aktivera denna funktion måste du ha eog-plugins installerat.

- - diff -Nru eog-3.26.2/help/sv/plugin-python-console.page eog-3.27.90/help/sv/plugin-python-console.page --- eog-3.26.2/help/sv/plugin-python-console.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,62 +0,0 @@ - - - - - - Python-konsolen kan användas för att lägga till extra funktioner och köra skript i bildvisaren. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Python-konsol - -

Bildvisaren har ett system för insticksmoduler som använder skriptspråket Python. Om du aktiverar Python-konsolen kan du få direktåtkomst till en Python-tolk inifrån bildvisaren som du t.ex. kan använda för att skriva skript eller manipulera bilder programmatiskt.

- - - -

För att aktivera denna funktion måste du ha eog-plugins installerat.

- - -

När eog-plugins är installerat, öppna programmenyn i systemraden, klicka på Inställningar och gå till fliken Insticksmoduler.

- - -

Kryssa i Python-konsol och klicka på Stäng.

- - -

Klicka på menyobjektet Python-konsol för att visa konsolen.

- - - - diff -Nru eog-3.26.2/help/sv/plugin-send-by-mail.page eog-3.27.90/help/sv/plugin-send-by-mail.page --- eog-3.26.2/help/sv/plugin-send-by-mail.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Skicka bilder enkelt genom att bifoga dem i ett e-postmeddelande. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Skicka bilder via e-post - -

Du kan lägga till en knapp som möjliggör ett smidigt sätt att skicka bilder till människor via e-post.

- -

För att göra detta, öppna programmenyn i systemraden, klicka på Inställningar och gå till fliken Insticksmoduler. Kryssa sedan i Skicka med e-post och klicka på Stäng. Detta kommer att visa menyobjektet Skicka med e-post.

- -

För att aktivera denna funktion måste du ha eog-plugins installerat.

- - -

Evolutions e-post måste vara inställt så att det ansluter till dina e-postkonton för att detta ska fungera.

- - - - - diff -Nru eog-3.26.2/help/sv/plugin-slideshow-shuffle.page eog-3.27.90/help/sv/plugin-slideshow-shuffle.page --- eog-3.26.2/help/sv/plugin-slideshow-shuffle.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,52 +0,0 @@ - - - - - - - Visa foton i slumpmässig ordning under ett bildspel. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Slumpmässigt bildspel - -

Du kan göra så att bilder visas i slumpmässig ordning när du startar ett bildspel.

- -

För att göra detta, öppna programmenyn i systemraden, klicka på Inställningar och gå till fliken Insticksmoduler. Kryssa sedan i Blandat bildspel och stäng dialogen.

- -

För att aktivera denna funktion måste du ha eog-plugins installerat.

- - diff -Nru eog-3.26.2/help/sv/plugins.page eog-3.27.90/help/sv/plugins.page --- eog-3.26.2/help/sv/plugins.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,100 +0,0 @@ - - - - - - Installera insticksmoduler för att få tillgång till extra funktioner. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Insticksmoduler - -

Du kan installera paketet eog-plugins för att få extra insticksmoduler för bildvisaren. Insticksmoduler lägger till ytterligare funktioner så som de listade nedan.

- - -

Du kan installera paketet eog-plugins via din Linux-distributions pakethanterare.

- - - -

installera eog-plugins

- - - - -

Följande funktioner finns inkluderade i eog-plugins:

- - - -

Datum i statusraden: Visar bilddatum i fönstrets statusrad.

- - -

Exif-visning: Visar kamerainställningar och histogram för digitala foton.

- - -

Helskärmsbakgrund: Aktiverar möjligheten att ändra bakgrund i helskärmsläge.

- - -

Helskärm med dubbelklick: Aktivera helskärmsläge med dubbelklick.

- - -

Karta: Visa den geografiska platsen för ett foto på en karta.

- - -

Skicka till PicasaWeb: Skicka upp dina bilder till PicasaWeb.

- - -

Python-konsol: En Python-konsol för skriptning för bildvisaren.

- - -

Skicka med e-post: Skicka en bild till en vän genom att bifoga den i ett nytt e-postmeddelande.

- - -

Blandat bildspel: Blanda bilder i bildspelsläge.

- - -

Zooma för att passa bildens bredd: Justera zoomnivån för att bildens fullständiga bredd ska få plats i fönstret.

- - - - -

Du kan hantera insticksmoduler genom att använda fliken Insticksmoduler i fönstret Inställningar.

- - - diff -Nru eog-3.26.2/help/sv/plugin-zoom-width.page eog-3.27.90/help/sv/plugin-zoom-width.page --- eog-3.26.2/help/sv/plugin-zoom-width.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Justerar zoomnivån för att en bilds fullständiga bredd ska få plats i fönstret. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Zooma för att passa bildens bredd - -

Aktivera insticksmodulen Zooma för att passa bildens bredd om du vill att bilder ska expanderas till att fylla ut fönstrets fullständiga bredd.

- -

För att göra detta, öppna programmenyn i systemraden, klicka på Inställningar och gå till fliken Insticksmoduler. Kryssa sedan i Zooma för att passa bildens bredd och stäng dialogen.

- -

För att lägga till denna funktionalitet måste du ha eog-plugins installerat.

- - diff -Nru eog-3.26.2/help/sv/preferences.page eog-3.27.90/help/sv/preferences.page --- eog-3.26.2/help/sv/preferences.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,109 +0,0 @@ - - - - - - Bildvisning, bildspel och insticksmoduler. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Inställningar -

Detta ämne förklarar alla inställningar du kan ändra i bildvisaren. Öppna programmenyn i systemraden och klicka på Inställningar för att börja ändra inställningarna.

- - - -
-Bildvisarinställningar - - - - Bildförbättringar -

Välj Mjuka upp bilder när de är utzoomade för att aktivera bildutjämning när du zoomar in och ut. Detta får lågupplösta (pixelerade) bilder att se bättre ut genom att utjämna taggiga kanter.

-

Om du aktiverar Automatisk orientering kommer bilder automatiskt att roteras enligt deras Exif-metadata. Detta är information om en bild som automatiskt infogas av en digitalkamera och kan inkludera detaljer om hur kamerans hölls när bilden togs. När automatisk orientering är aktiverat kommer till exempel porträttfoton automatiskt att roteras så att de är stående. Rotationen sparas inte förrän du sparar den roterade bilden.

-

Automatisk orientering fungerar inte med alla bilder; bara bilder som tagits med en kamera som sparar Exif-metadata med orientering kommer att roteras.

- - - Genomskinliga delar -

Välj en av följande alternativ för att bestämma hur de genomskinliga delarna av en bild ska visas, om sådana finns:

- - -

Som rutmönster:

-

Visar alla genomskinliga delar av bilden i ett rutnätsmönster.

- - -

Som anpassad färg:

-

Visar genomskinliga delar av bilden med en enda färg som du anger genom att klicka på färgväljarknappen.

- - -

Som bakgrund:

-

Visar genomskinliga delar av bilden som Bakgrundsfärg om Som anpassad färg under Bakgrund är ikryssad. Annars kommer standardbakgrundsfärgen att användas.

- - - - -
- - -
-Bildspelsinställningar - -

Anpassa bildspelsinställningar:

- - -

Under Bildzoomning kan du välja om du vill att bilder som är mindre än skärmen ska expanderas så att de anpassas till skärmen.

- - -

Under Sekvens kan du välja hur många sekunder varje bild bör visas under (mellan 1 och 100) innan nästa bild visas.

- - -

Kryssa i Slingsekvens om du vill att bildspelet ska repetera kontinuerligt. Om ej ikryssad kommer bildspelet att starta med bilden som du valt och avslutas med den sista bilden i mappen.

- - -
- - -
-Insticksmodulsinställningar - - - - -

Här kan du kryssa i/kryssa ur vilka ytterligare funktioner du vill aktivera eller inaktivera. Bilden till vänster visar insticksmodulerna som är tillgängliga som standard.

- -

Du kan också vilja installera paketet eog-plugins som innehåller insticksmoduler som tillhandahåller ett antal extra funktioner. Efter att du installerat det kan du aktivera ytterligare insticksmoduler så som de som visas i bilden till höger.

-
- - diff -Nru eog-3.26.2/help/sv/print.page eog-3.27.90/help/sv/print.page --- eog-3.26.2/help/sv/print.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ - - - - - - Klicka på Skriv ut… och använd sedan flikarna för att ändra skrivarinställningar. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Skriv ut en bild - -

För att skriva ut bilden som du tittar på för närvarande:

- - - -

Klicka på Skriv ut….

- - -

I fliken Allmänt välj skrivaren som du vill använda och antal kopior du vill skriva ut.

- - -

Om du går till fliken Bildinställningar kan du justera Position och Storlek för bilden.

-

Bildens position på sidan kan också justeras genom att dra runt den i förhandsgranskningen.

- - -

Om du använder fotopapper av hög kvalitet gå till fliken Sidinställningar och välj korrekt Papperstyp. Du kan också gå till fliken Bildkvalitet och välja en hög kvalitetsinställning så att du får den bästa möjliga fotokvaliteten.

- - -

Klicka på Skriv ut.

- - - -

Notera att vissa av flikarna som nämns ovan inte visas för vissa skrivarmodeller. Detta är för att skrivardrivrutinen för de skrivarna inte tillåter vissa inställningar att ändras. Så om du till exempel inte ser någon flik Bildkvalitet innebär det troligen att skrivardrivrutinerna som används inte har stöd för de inställningarna.

- - diff -Nru eog-3.26.2/help/sv/rename-multiple.page eog-3.27.90/help/sv/rename-multiple.page --- eog-3.26.2/help/sv/rename-multiple.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,90 +0,0 @@ - - - - - - - Byt automatiskt namn och numrera bilder satsvis. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Byt namn på flera bilder på en gång - -

Om du har många bilder som du vill byta namn på, kanske så att de har ett standardiserat, numeriskt formaterat namn:

- - - -

Öppna bildgalleriet genom att trycka på F9.

- - -

Markera alla bilder som du vill byta namn på i bildgalleriet genom att hålla ner Ctrl och klicka på dem en efter en.

-

Alternativt kan du trycka på CtrlA för att markera alla bilderna.

- - -

Klicka på Spara som…. Ett fönster med några filnamnsalternativ kommer att visas (bilden nedan visar hur fönstret ser ut).

- - -

Bilderna kommer, efter att de bytt namn, att sparas i den aktuella mappen som standard. För att spara dem någon annanstans ändra Målmappen.

- - -

Använd rutan Filnamnsformat för att välja ett namngivningsformat för bilderna. Förhandsvisning av filnamn kommer att visa dig hur de nya filnamnen kommer att se ut. Se avsnittet nedan för rekommendationer kring hur du kan byta namn på filerna.

- - -

Säkerställ att rullgardinslistan Filnamnsformat är inställd på som det är om du inte vill konvertera bilderna till ett annat filformat.

- - -

Klicka på Spara som så kommer bilderna att byta namn.

- - - - - -
- Välj ett filnamnsformat -

Filnamnen för de filer som bytt namn bestäms av vad du skriver i rutan Filnamnsformat.

- - -

Du kan behålla originalfilnamnet som en del av det nya filnamnet genom att ange %f i rutan.

-

Om du till exempel skriver paris_%f i rutan Filnamnsformat kommer bilder som heter solros.jpg, hus.jpg och katt.jpg att byta namn till paris_solros.jpg, paris_hus.jpg och paris_katt.jpg.

- - -

Om du lägger till %n kommer bilderna att numreras konsekutivt med början på det nummer du väljer under Alternativ.

-

Om du till exempel skriver solsken_%n i rutan Filnamnsformat kommer bilder som heter solros.jpg, hus.jpg och katt.jpg att byta namn till solsken_3.jpg, solsken_1.jpg och solsken_2.jpg. (De kommer att numreras enligt originalfilnamnens alfabetiska ordning.)

- - -
- - diff -Nru eog-3.26.2/help/sv/shortcuts.page eog-3.27.90/help/sv/shortcuts.page --- eog-3.26.2/help/sv/shortcuts.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,180 +0,0 @@ - - - - - - En lista över alla tangentbordsgenvägar. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Tangentbordsgenvägar - -

Detta är en lista över alla tangentbordsgenvägar som du kan använda i bildvisaren.

- -
- Öppna, stäng, spara och skriv ut - - - - - - - - - - - - - - - - - - - - - - - - - -

Öppna en bildfil

CtrlO

Spara bilden med samma filnamn

CtrlS

Spara en kopia av aktuell bild under ett nytt filnamn

SkiftCtrlS

Skriv ut aktuell bild

CtrlP

Stäng aktuellt fönster

CtrlW

Ställ in bilden som din skrivbordsbakgrund

CtrlF8

-
- -
- Visa bilder - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Gå till föregående bild i mappen

Backsteg / Vänster

Gå till nästa bild i mappen

Blanksteg / Höger

Gå till den första bilden i mappen

AltHome

Gå till den sista bilden i mappen

AltEnd

Välj en slumpmässig bild i mappen

CtrlM

Visa bildgalleriet

F9

Visa i helskärmsläge

F11

Visa bildspel

F5

Verklig storlek

Ctrl0 (Noll)

Bästa anpassning

F

Rulla runt i en stor bild

Altpiltangenter

-
- -
- Kopiera en bild för att sedan klistra in i ett annat program - - - - - -

Kopiera

CtrlC

-
- -
- Zooma och rotera - - - - - - - - - - - - - - - - - -

Zooma in

+

Zooma ut

-

Rotera medurs

CtrlR

Rotera moturs

SkiftCtrlR

-
- -
- Övrigt - - - - - - - - - - - - - - - - - -

Visa sidopanel

CtrlF9

Visa bildegenskaper

AltRetur

Ångra

CtrlZ

Hjälp

F1

-
- diff -Nru eog-3.26.2/help/sv/slideshow.page eog-3.27.90/help/sv/slideshow.page --- eog-3.26.2/help/sv/slideshow.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ - - - - - - - - Klicka på Bildspel för att visa alla bilderna i mappen som ett bildspel. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Bildspel - -

För att visa alla bilderna i en mapp som ett bildspel:

- - - -

Öppna en av bilderna i mappen.

- - -

Klicka på Bildspel eller tryck på F5.

-

Ett bildspel i helskärmsläge startar. Efter några sekunder kommer en ny bild att visas. Om du vill flytta genom bildspelet snabbare eller återgå till en bild som redan visats kan du använda Vänster och Höger piltangenter för att manuellt flytta bakåt och framåt.

- - -

För att avsluta bildspelet, tryck på Esc eller F5.

- - - -

Du kan ändra bildspelsinställningar så som hur länge varje bild ska visas. Se avsnittet om bildspelsinställningar för vidare information.

- - diff -Nru eog-3.26.2/help/sv/translate.page eog-3.27.90/help/sv/translate.page --- eog-3.26.2/help/sv/translate.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Översätt Bildvisare - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Hjälp till att översätt -

Användargränssnittet och dokumentationen för Bildvisare översätts av en världsomspännande frivillig gemenskap. Du är välkommen att deltaga.

-

Det finns många språk för vilka översättningar fortfarande behövs.

-

För att börja översätta kommer du att behöva skapa ett konto och gå med i översättningsgruppen för ditt språk. Detta kommer att ge dig möjligheten att skicka upp nya översättningar.

- -

Du kan chatta med GNOME-översättare via irc. Folk i kanalen finns över hela världen, så du kanske inte får ett omedelbart svar på grund av skillnader i tidzon.

-

Alternativt kan du kontakta internationaliseringsgruppen via deras sändlista.

- diff -Nru eog-3.26.2/help/sv/view.page eog-3.27.90/help/sv/view.page --- eog-3.26.2/help/sv/view.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,80 +0,0 @@ - - - - - - Tryck på Vänster och Höger för att växla mellan bilder eller använd bildgalleriet för att visa dem allihop. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons DelaLika 3.0

- - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - -Visa alla bilderna i en mapp - -

Du kan snabbat bläddra igenom alla dina bilder i en mapp genom att öppna en av bilderna och sedan klicka på knapparna Nästa och Föregående till vänster och höger om den visade bilden (till exempel). Du kan också visa ett bildgalleri med miniatyrbilder för alla bilder i en mapp på en gång.

- -
- Bläddra genom alla bilder i en mapp -

Om du har en mapp som innehåller flera bilder kan du enkelt bläddra genom alla bilderna utan att öppna dem individuellt.

- - -

Öppna vilken som helst av bilderna i mappen som du vill bläddra genom.

- - -

Klicka på Nästa och Föregående till vänster och höger om den visade bilden, eller tryck på Höger- och Vänster-tangenterna för att växla mellan bilder.

-

Alternativt kan du använda Upp- och Ner-tangenterna eller tangenterna Blanksteg och Backsteg.

- - -

Du kan bläddra genom bilderna i helskärmsläge genom att klicka på knappen Helskärm i namnlisten eller genom att trycka på F11. Använd tangentbordet för att växa mellan bilder i helskärmsläge.

-

För att återgå till normal visning tryck på Esc eller F11.

- - -
- - - - diff -Nru eog-3.26.2/help/sv/zoom.page eog-3.27.90/help/sv/zoom.page --- eog-3.26.2/help/sv/zoom.page 2017-10-02 20:22:53.000000000 +0000 +++ eog-3.27.90/help/sv/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,66 +0,0 @@ - - - - - - - Förstora bilden på skärmen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons DelaLika 3.0

- - - - - Daniel Nylander - po@danielnylander.se - 2007, 2008, 2009 - - - - Henrik Löwendahl - henrik.lowendahl@purplescout.se - 2011 - - - - Sebastian Rasmussen - sebras@gmail.com - 2016, 2017 - - - - Anders Jonsson - anders.jonsson@norsjovallen.se - 2017 - - - -Zoom - -

Du kan zooma in och ut för att visa mer eller mindre av bilden på skärmen. Detta är användbart om du vill se en stor bild i sin helhet eller om du vill inspektera små detaljer i en bild.

- - - -

Du kan zooma via mushjulet. Rulla uppåt för att zooma in eller rulla nedåt för att zooma ut.

- - -

Du kan också zooma via knapparna i namnlisten. För att zooma in, klicka på ikonen Förstora bilden och för att zooma ut klicka på ikonen Förminska bilden. Dessa ser ut som ”plus”- och ”minus”-tecken.

- - -

Alternativt, använd tangentbordsgenvägarna Ctrl+ eller Ctrl-.

- - - -

För att visa bilden i originalstorlek, välj zoomnivån 100% från rullgardinsknappen i namnlisten. Alternativt, använd tangentbordsgenvägarna Ctrl0 eller 1.

- -
- Zooma för att passa till fönstret -

Du kan välja att zooma in så att bilden anpassas till fönstret, även om du ändrar storlek på det. Klicka på Bästa anpassning i rullgardinsmenyn i namnlisten för att göra detta.

-
- diff -Nru eog-3.26.2/help/te/bug-filing.page eog-3.27.90/help/te/bug-filing.page --- eog-3.26.2/help/te/bug-filing.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/te/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/te/commandline.page eog-3.27.90/help/te/commandline.page --- eog-3.26.2/help/te/commandline.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/te/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/te/copy-paste.page eog-3.27.90/help/te/copy-paste.page --- eog-3.26.2/help/te/copy-paste.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/te/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/te/default.page eog-3.27.90/help/te/default.page --- eog-3.26.2/help/te/default.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/te/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/te/desktop-background.page eog-3.27.90/help/te/desktop-background.page --- eog-3.26.2/help/te/desktop-background.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/te/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/te/develop.page eog-3.27.90/help/te/develop.page --- eog-3.26.2/help/te/develop.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/te/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/te/documentation.page eog-3.27.90/help/te/documentation.page --- eog-3.26.2/help/te/documentation.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/te/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/te/edit.page eog-3.27.90/help/te/edit.page --- eog-3.26.2/help/te/edit.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/te/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/te/flip-rotate.page eog-3.27.90/help/te/flip-rotate.page --- eog-3.26.2/help/te/flip-rotate.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/te/format-change.page eog-3.27.90/help/te/format-change.page --- eog-3.26.2/help/te/format-change.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/te/formats-save.page eog-3.27.90/help/te/formats-save.page --- eog-3.26.2/help/te/formats-save.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/te/formats-view.page eog-3.27.90/help/te/formats-view.page --- eog-3.26.2/help/te/formats-view.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - Animation

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Windows Icon

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap from the PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/te/index.page eog-3.27.90/help/te/index.page --- eog-3.26.2/help/te/index.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- అధునాతన -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/te/introduction.page eog-3.27.90/help/te/introduction.page --- eog-3.26.2/help/te/introduction.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -పరిచయం - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/te/legal.xml eog-3.27.90/help/te/legal.xml --- eog-3.26.2/help/te/legal.xml 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/te/license.page eog-3.27.90/help/te/license.page --- eog-3.26.2/help/te/license.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/te/open.page eog-3.27.90/help/te/open.page --- eog-3.26.2/help/te/open.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/te/plugin-exif-digital.page eog-3.27.90/help/te/plugin-exif-digital.page --- eog-3.26.2/help/te/plugin-exif-digital.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/te/plugin-fullscreen-background.page eog-3.27.90/help/te/plugin-fullscreen-background.page --- eog-3.26.2/help/te/plugin-fullscreen-background.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/te/plugin-fullscreen-double-click.page eog-3.27.90/help/te/plugin-fullscreen-double-click.page --- eog-3.26.2/help/te/plugin-fullscreen-double-click.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/te/plugin-picasa.page eog-3.27.90/help/te/plugin-picasa.page --- eog-3.26.2/help/te/plugin-picasa.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/te/plugin-python-console.page eog-3.27.90/help/te/plugin-python-console.page --- eog-3.26.2/help/te/plugin-python-console.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/te/plugin-send-by-mail.page eog-3.27.90/help/te/plugin-send-by-mail.page --- eog-3.26.2/help/te/plugin-send-by-mail.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/te/plugin-slideshow-shuffle.page eog-3.27.90/help/te/plugin-slideshow-shuffle.page --- eog-3.26.2/help/te/plugin-slideshow-shuffle.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/te/plugins.page eog-3.27.90/help/te/plugins.page --- eog-3.26.2/help/te/plugins.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -ప్లగ్ఇన్ స్ - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/te/plugin-zoom-width.page eog-3.27.90/help/te/plugin-zoom-width.page --- eog-3.26.2/help/te/plugin-zoom-width.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/te/preferences.page eog-3.27.90/help/te/preferences.page --- eog-3.26.2/help/te/preferences.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -అభీష్టాలు -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

Displays any transparent parts of the image in a check pattern.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/te/print.page eog-3.27.90/help/te/print.page --- eog-3.26.2/help/te/print.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/te/rename-multiple.page eog-3.27.90/help/te/rename-multiple.page --- eog-3.26.2/help/te/rename-multiple.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/te/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/te/shortcuts.page eog-3.27.90/help/te/shortcuts.page --- eog-3.26.2/help/te/shortcuts.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/te/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -కీబోర్డు సత్వరమార్గాలు - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

నకలు

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

సహాయం

F1

-
- diff -Nru eog-3.26.2/help/te/slideshow.page eog-3.27.90/help/te/slideshow.page --- eog-3.26.2/help/te/slideshow.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/te/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -స్లయిడ్ షో - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/te/translate.page eog-3.27.90/help/te/translate.page --- eog-3.26.2/help/te/translate.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/te/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/te/view.page eog-3.27.90/help/te/view.page --- eog-3.26.2/help/te/view.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/te/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/te/zoom.page eog-3.27.90/help/te/zoom.page --- eog-3.26.2/help/te/zoom.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/te/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -జూమ్ - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/th/bug-filing.page eog-3.27.90/help/th/bug-filing.page --- eog-3.26.2/help/th/bug-filing.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/th/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/th/commandline.page eog-3.27.90/help/th/commandline.page --- eog-3.26.2/help/th/commandline.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/th/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/th/copy-paste.page eog-3.27.90/help/th/copy-paste.page --- eog-3.26.2/help/th/copy-paste.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/th/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/th/default.page eog-3.27.90/help/th/default.page --- eog-3.26.2/help/th/default.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/th/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/th/desktop-background.page eog-3.27.90/help/th/desktop-background.page --- eog-3.26.2/help/th/desktop-background.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/th/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/th/develop.page eog-3.27.90/help/th/develop.page --- eog-3.26.2/help/th/develop.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/th/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/th/documentation.page eog-3.27.90/help/th/documentation.page --- eog-3.26.2/help/th/documentation.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/th/edit.page eog-3.27.90/help/th/edit.page --- eog-3.26.2/help/th/edit.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/th/flip-rotate.page eog-3.27.90/help/th/flip-rotate.page --- eog-3.26.2/help/th/flip-rotate.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/th/format-change.page eog-3.27.90/help/th/format-change.page --- eog-3.26.2/help/th/format-change.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/th/formats-save.page eog-3.27.90/help/th/formats-save.page --- eog-3.26.2/help/th/formats-save.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/th/formats-view.page eog-3.27.90/help/th/formats-view.page --- eog-3.26.2/help/th/formats-view.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - ภาพเคลื่อนไหว

 -

BMP - Bitmap

 -

GIF - Graphics Interchange Format

 -

ICO - Windows Icon

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - Portable Network Graphics

 -

PNM - Portable Anymap from the PPM Toolkit

 -

RAS - Sun Raster

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - Tagged Image File Format

 -

WBMP - Wireless Bitmap

 -

XBM - X Bitmap

 -

XPM - X Pixmap

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/th/index.page eog-3.27.90/help/th/index.page --- eog-3.26.2/help/th/index.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/th/introduction.page eog-3.27.90/help/th/introduction.page --- eog-3.26.2/help/th/introduction.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -เกริ่นนำ - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/th/legal.xml eog-3.27.90/help/th/legal.xml --- eog-3.26.2/help/th/legal.xml 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/th/license.page eog-3.27.90/help/th/license.page --- eog-3.26.2/help/th/license.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/th/open.page eog-3.27.90/help/th/open.page --- eog-3.26.2/help/th/open.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/th/plugin-exif-digital.page eog-3.27.90/help/th/plugin-exif-digital.page --- eog-3.26.2/help/th/plugin-exif-digital.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/th/plugin-fullscreen-background.page eog-3.27.90/help/th/plugin-fullscreen-background.page --- eog-3.26.2/help/th/plugin-fullscreen-background.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/th/plugin-fullscreen-double-click.page eog-3.27.90/help/th/plugin-fullscreen-double-click.page --- eog-3.26.2/help/th/plugin-fullscreen-double-click.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/th/plugin-picasa.page eog-3.27.90/help/th/plugin-picasa.page --- eog-3.26.2/help/th/plugin-picasa.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/th/plugin-python-console.page eog-3.27.90/help/th/plugin-python-console.page --- eog-3.26.2/help/th/plugin-python-console.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/th/plugin-send-by-mail.page eog-3.27.90/help/th/plugin-send-by-mail.page --- eog-3.26.2/help/th/plugin-send-by-mail.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/th/plugin-slideshow-shuffle.page eog-3.27.90/help/th/plugin-slideshow-shuffle.page --- eog-3.26.2/help/th/plugin-slideshow-shuffle.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/th/plugins.page eog-3.27.90/help/th/plugins.page --- eog-3.26.2/help/th/plugins.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/th/plugin-zoom-width.page eog-3.27.90/help/th/plugin-zoom-width.page --- eog-3.26.2/help/th/plugin-zoom-width.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/th/preferences.page eog-3.27.90/help/th/preferences.page --- eog-3.26.2/help/th/preferences.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -การปรับแต่ง -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

Displays any transparent parts of the image in a check pattern.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/th/print.page eog-3.27.90/help/th/print.page --- eog-3.26.2/help/th/print.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/th/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/th/rename-multiple.page eog-3.27.90/help/th/rename-multiple.page --- eog-3.26.2/help/th/rename-multiple.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/th/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/th/shortcuts.page eog-3.27.90/help/th/shortcuts.page --- eog-3.26.2/help/th/shortcuts.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/th/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/th/slideshow.page eog-3.27.90/help/th/slideshow.page --- eog-3.26.2/help/th/slideshow.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/th/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/th/translate.page eog-3.27.90/help/th/translate.page --- eog-3.26.2/help/th/translate.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/th/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/th/view.page eog-3.27.90/help/th/view.page --- eog-3.26.2/help/th/view.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/th/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/th/zoom.page eog-3.27.90/help/th/zoom.page --- eog-3.26.2/help/th/zoom.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/th/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/uk/bug-filing.page eog-3.27.90/help/uk/bug-filing.page --- eog-3.26.2/help/uk/bug-filing.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/uk/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/uk/commandline.page eog-3.27.90/help/uk/commandline.page --- eog-3.26.2/help/uk/commandline.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/uk/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/uk/copy-paste.page eog-3.27.90/help/uk/copy-paste.page --- eog-3.26.2/help/uk/copy-paste.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/uk/default.page eog-3.27.90/help/uk/default.page --- eog-3.26.2/help/uk/default.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/uk/desktop-background.page eog-3.27.90/help/uk/desktop-background.page --- eog-3.26.2/help/uk/desktop-background.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/uk/develop.page eog-3.27.90/help/uk/develop.page --- eog-3.26.2/help/uk/develop.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/uk/documentation.page eog-3.27.90/help/uk/documentation.page --- eog-3.26.2/help/uk/documentation.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/uk/edit.page eog-3.27.90/help/uk/edit.page --- eog-3.26.2/help/uk/edit.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/uk/flip-rotate.page eog-3.27.90/help/uk/flip-rotate.page --- eog-3.26.2/help/uk/flip-rotate.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/uk/format-change.page eog-3.27.90/help/uk/format-change.page --- eog-3.26.2/help/uk/format-change.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/uk/formats-save.page eog-3.27.90/help/uk/formats-save.page --- eog-3.26.2/help/uk/formats-save.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/uk/formats-view.page eog-3.27.90/help/uk/formats-view.page --- eog-3.26.2/help/uk/formats-view.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - Анімація

 -

BMP - Bitmap

 -

GIF - графічний формат для обміну

 -

ICO - значок Windows

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - переносна мережна графіка

 -

PNM - переносна Anymap з набору PPM

 -

RAS - Sun Raster

 -

SVG - масштабована векторна графіка

 -

TGA - Targa

 -

TIFF - теговий формат файлів зображень

 -

WBMP - бітове зображення для бездротового зв'язку

 -

XBM - бітове зображення системи X

 -

XPM - піксельне зображення системи X

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/uk/index.page eog-3.27.90/help/uk/index.page --- eog-3.26.2/help/uk/index.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/uk/introduction.page eog-3.27.90/help/uk/introduction.page --- eog-3.26.2/help/uk/introduction.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Вступ - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/uk/legal.xml eog-3.27.90/help/uk/legal.xml --- eog-3.26.2/help/uk/legal.xml 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/uk/license.page eog-3.27.90/help/uk/license.page --- eog-3.26.2/help/uk/license.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/uk/open.page eog-3.27.90/help/uk/open.page --- eog-3.26.2/help/uk/open.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/uk/plugin-exif-digital.page eog-3.27.90/help/uk/plugin-exif-digital.page --- eog-3.26.2/help/uk/plugin-exif-digital.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/uk/plugin-fullscreen-background.page eog-3.27.90/help/uk/plugin-fullscreen-background.page --- eog-3.26.2/help/uk/plugin-fullscreen-background.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/uk/plugin-fullscreen-double-click.page eog-3.27.90/help/uk/plugin-fullscreen-double-click.page --- eog-3.26.2/help/uk/plugin-fullscreen-double-click.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/uk/plugin-picasa.page eog-3.27.90/help/uk/plugin-picasa.page --- eog-3.26.2/help/uk/plugin-picasa.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/uk/plugin-python-console.page eog-3.27.90/help/uk/plugin-python-console.page --- eog-3.26.2/help/uk/plugin-python-console.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/uk/plugin-send-by-mail.page eog-3.27.90/help/uk/plugin-send-by-mail.page --- eog-3.26.2/help/uk/plugin-send-by-mail.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/uk/plugin-slideshow-shuffle.page eog-3.27.90/help/uk/plugin-slideshow-shuffle.page --- eog-3.26.2/help/uk/plugin-slideshow-shuffle.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/uk/plugins.page eog-3.27.90/help/uk/plugins.page --- eog-3.26.2/help/uk/plugins.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/uk/plugin-zoom-width.page eog-3.27.90/help/uk/plugin-zoom-width.page --- eog-3.26.2/help/uk/plugin-zoom-width.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/uk/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/uk/preferences.page eog-3.27.90/help/uk/preferences.page --- eog-3.26.2/help/uk/preferences.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/uk/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Параметри -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

Відображає прозорі частини зображення у вигляді шахового візерунку.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/uk/print.page eog-3.27.90/help/uk/print.page --- eog-3.26.2/help/uk/print.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/uk/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/uk/rename-multiple.page eog-3.27.90/help/uk/rename-multiple.page --- eog-3.26.2/help/uk/rename-multiple.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/uk/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/uk/shortcuts.page eog-3.27.90/help/uk/shortcuts.page --- eog-3.26.2/help/uk/shortcuts.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/uk/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/uk/slideshow.page eog-3.27.90/help/uk/slideshow.page --- eog-3.26.2/help/uk/slideshow.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/uk/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Показ слайдів - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/uk/translate.page eog-3.27.90/help/uk/translate.page --- eog-3.26.2/help/uk/translate.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/uk/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/uk/view.page eog-3.27.90/help/uk/view.page --- eog-3.26.2/help/uk/view.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/uk/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/uk/zoom.page eog-3.27.90/help/uk/zoom.page --- eog-3.26.2/help/uk/zoom.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/uk/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/zh_CN/bug-filing.page eog-3.27.90/help/zh_CN/bug-filing.page --- eog-3.26.2/help/zh_CN/bug-filing.page 2017-08-10 20:19:28.000000000 +0000 +++ eog-3.27.90/help/zh_CN/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/zh_CN/commandline.page eog-3.27.90/help/zh_CN/commandline.page --- eog-3.26.2/help/zh_CN/commandline.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/zh_CN/copy-paste.page eog-3.27.90/help/zh_CN/copy-paste.page --- eog-3.26.2/help/zh_CN/copy-paste.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/zh_CN/default.page eog-3.27.90/help/zh_CN/default.page --- eog-3.26.2/help/zh_CN/default.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

点击 关闭.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/zh_CN/desktop-background.page eog-3.27.90/help/zh_CN/desktop-background.page --- eog-3.26.2/help/zh_CN/desktop-background.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/zh_CN/develop.page eog-3.27.90/help/zh_CN/develop.page --- eog-3.26.2/help/zh_CN/develop.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/zh_CN/documentation.page eog-3.27.90/help/zh_CN/documentation.page --- eog-3.26.2/help/zh_CN/documentation.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/zh_CN/edit.page eog-3.27.90/help/zh_CN/edit.page --- eog-3.26.2/help/zh_CN/edit.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/zh_CN/flip-rotate.page eog-3.27.90/help/zh_CN/flip-rotate.page --- eog-3.26.2/help/zh_CN/flip-rotate.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

选择 横向翻转 或 纵向翻转.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

顺时针旋转

CtrlR

逆时针旋转

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/zh_CN/format-change.page eog-3.27.90/help/zh_CN/format-change.page --- eog-3.26.2/help/zh_CN/format-change.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

点击 保存.

- - -
- - diff -Nru eog-3.26.2/help/zh_CN/formats-save.page eog-3.27.90/help/zh_CN/formats-save.page --- eog-3.26.2/help/zh_CN/formats-save.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG,PND, BMP和其他文件格式. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/zh_CN/formats-view.page eog-3.27.90/help/zh_CN/formats-view.page --- eog-3.26.2/help/zh_CN/formats-view.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - 动画

 -

BMP - Bitmap

 -

GIF - 可交换的图形格式

 -

ICO - Windows 图标

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - 可移植网络图像

 -

PNM - PPM 工具包的可移植 Anymap 格式

 -

RAS - Sun 光栅

 -

SVG - 可缩放的矢量图形

 -

TGA - Targa

 -

TIFF - 标记图像文件格式

 -

WBMP - 无线网络位图

 -

XBM - X 位图

 -

XPM - X 像素图

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/zh_CN/index.page eog-3.27.90/help/zh_CN/index.page --- eog-3.26.2/help/zh_CN/index.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/zh_CN/introduction.page eog-3.27.90/help/zh_CN/introduction.page --- eog-3.26.2/help/zh_CN/introduction.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -简介 - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/zh_CN/legal.xml eog-3.27.90/help/zh_CN/legal.xml --- eog-3.26.2/help/zh_CN/legal.xml 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/zh_CN/license.page eog-3.27.90/help/zh_CN/license.page --- eog-3.26.2/help/zh_CN/license.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/zh_CN/open.page eog-3.27.90/help/zh_CN/open.page --- eog-3.26.2/help/zh_CN/open.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/zh_CN/plugin-exif-digital.page eog-3.27.90/help/zh_CN/plugin-exif-digital.page --- eog-3.26.2/help/zh_CN/plugin-exif-digital.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/zh_CN/plugin-fullscreen-background.page eog-3.27.90/help/zh_CN/plugin-fullscreen-background.page --- eog-3.26.2/help/zh_CN/plugin-fullscreen-background.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/zh_CN/plugin-fullscreen-double-click.page eog-3.27.90/help/zh_CN/plugin-fullscreen-double-click.page --- eog-3.26.2/help/zh_CN/plugin-fullscreen-double-click.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/zh_CN/plugin-picasa.page eog-3.27.90/help/zh_CN/plugin-picasa.page --- eog-3.26.2/help/zh_CN/plugin-picasa.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/zh_CN/plugin-python-console.page eog-3.27.90/help/zh_CN/plugin-python-console.page --- eog-3.26.2/help/zh_CN/plugin-python-console.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/zh_CN/plugin-send-by-mail.page eog-3.27.90/help/zh_CN/plugin-send-by-mail.page --- eog-3.26.2/help/zh_CN/plugin-send-by-mail.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/zh_CN/plugin-slideshow-shuffle.page eog-3.27.90/help/zh_CN/plugin-slideshow-shuffle.page --- eog-3.26.2/help/zh_CN/plugin-slideshow-shuffle.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/zh_CN/plugins.page eog-3.27.90/help/zh_CN/plugins.page --- eog-3.26.2/help/zh_CN/plugins.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -插件 - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/zh_CN/plugin-zoom-width.page eog-3.27.90/help/zh_CN/plugin-zoom-width.page --- eog-3.26.2/help/zh_CN/plugin-zoom-width.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/zh_CN/preferences.page eog-3.27.90/help/zh_CN/preferences.page --- eog-3.26.2/help/zh_CN/preferences.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -首选项 -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

将图像任何透明部分显示为检查图案

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/zh_CN/print.page eog-3.27.90/help/zh_CN/print.page --- eog-3.26.2/help/zh_CN/print.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_CN/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

点击 打印

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/zh_CN/rename-multiple.page eog-3.27.90/help/zh_CN/rename-multiple.page --- eog-3.26.2/help/zh_CN/rename-multiple.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_CN/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/zh_CN/shortcuts.page eog-3.27.90/help/zh_CN/shortcuts.page --- eog-3.26.2/help/zh_CN/shortcuts.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_CN/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,157 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

以相同的文件名保存图像

CtrlS

用新的文件名保存当前图像的一个副本

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

将图像设置成为桌面背景

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

前往文件夹中的上一个图像

Back space / Left

前往文件夹中的下一个图像

Space bar / Right

前往文件夹中的第一个图像

AltHome

前往文件夹中的最后一个图像

AltEnd

从文件夹中随机选择一个图像

CtrlM

View the image gallery

F9

全屏浏览

F11

View slideshow

F5

实际大小

Ctrl0 (零)

最佳匹配

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

复制

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

缩小

-

顺时针旋转

CtrlR

逆时针旋转

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

查看侧变栏

CtrlF9

查看文件属性

AltReturn

撤销

CtrlZ

帮助

F1

-
- diff -Nru eog-3.26.2/help/zh_CN/slideshow.page eog-3.27.90/help/zh_CN/slideshow.page --- eog-3.26.2/help/zh_CN/slideshow.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_CN/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -幻灯片放映 - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

要退出幻灯片模式, 按 Esc或F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/zh_CN/translate.page eog-3.27.90/help/zh_CN/translate.page --- eog-3.26.2/help/zh_CN/translate.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_CN/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/zh_CN/view.page eog-3.27.90/help/zh_CN/view.page --- eog-3.26.2/help/zh_CN/view.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_CN/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/zh_CN/zoom.page eog-3.27.90/help/zh_CN/zoom.page --- eog-3.26.2/help/zh_CN/zoom.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_CN/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/help/zh_TW/bug-filing.page eog-3.27.90/help/zh_TW/bug-filing.page --- eog-3.26.2/help/zh_TW/bug-filing.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/bug-filing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ - - - - - - File a bug against the image viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - -Report a problem with the image viewer -

- The image viewer is maintained by a volunteer community. You are welcome to participate. -

- -

- If you experience problems with the image viewer (for example, if it crashes or behaves unexpectedly), or if it is missing some feature that you think it should have, please file a bug report by clicking on the link . Bug reports are how software developers keep track of problems so that they can fix them. -

-

- To participate, you need an account which will give you the ability to file bugs and make comments. Also, you need to register so you can receive updates by email about the status of your bug. If you don't already have an account, just click on the New Account link to create one. -

-

- Once you have an account, log in, and click File a -BugCoreeog. - Before reporting a bug, please read the bug writing -guidelines, and please browse for the bug to see if it already exists. -

-

- To file your bug, choose the component in the Component menu. If you are not sure which component your bug pertains to, choose general. -

-

- If you are requesting a new feature, choose enhancement in the Severity menu. - Fill in the Summary and Description sections and click Submit Bug. -

-

- Your report will be given an ID number, and its status will be updated as it is being dealt with. Bugs can take a while to be fixed, and the software developers might ask you for further information to help them figure out what the problem is. -

- diff -Nru eog-3.26.2/help/zh_TW/commandline.page eog-3.27.90/help/zh_TW/commandline.page --- eog-3.26.2/help/zh_TW/commandline.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/commandline.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ - - - - - - Command Line - The eog command can open any number of images in various modes. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -The command line - -

-To start the Image Viewer from the -Terminal, type -eog.

-

-You can open a specific file by typing the filename after the eog command: -

-eog image.jpeg -

-You can open a specific folder by typing the folder name after the eog command: -

-eog folder -

To see all the images in a folder at once, you may wish to browse -the image gallery.

- -
- Open an image in fullscreen mode - eog --fullscreen image.jpeg -
- -
- Open image in a new instance - eog --new-instance image.jpeg -
-
- Open a folder in slideshow mode - eog --slide-show Pictures/ -
- diff -Nru eog-3.26.2/help/zh_TW/copy-paste.page eog-3.27.90/help/zh_TW/copy-paste.page --- eog-3.26.2/help/zh_TW/copy-paste.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/copy-paste.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - - - How to copy/paste from the image viewer into -another application. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Copy and paste a picture -

To copy a picture from the image viewer into another application, right-click on -the picture and choose Copy.

- -

The picture has been copied to the clipboard, and can now be pasted into a -LibreOffice document, Gimp image, or other application.

- - diff -Nru eog-3.26.2/help/zh_TW/default.page eog-3.27.90/help/zh_TW/default.page --- eog-3.26.2/help/zh_TW/default.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/default.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - - Make image viewer the default application for viewing pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Open pictures in the image viewer by default -

If you want to make the image viewer the default program that opens certain image -file types:

- - - -

In the files app, right click the file and choose -Properties.

- - -

Go to the Open With tab. A list of -Recommended Applications will appear.

- - -

Select the Image Viewer and click Set as -default.

-

If Image Viewer is not on the Recommended -Applications list, click Show other applications. -Select Image Viewer from the list that appears and click Set as -default.

- - -

Click Close.

- - - -

In future, when you double-click a file of the same type, it will open up in the image viewer.

- - diff -Nru eog-3.26.2/help/zh_TW/desktop-background.page eog-3.27.90/help/zh_TW/desktop-background.page --- eog-3.26.2/help/zh_TW/desktop-background.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/desktop-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ - - - - - - Set your favorite picture as your desktop background/wallpaper. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Make the current picture your desktop background -

To set the picture that you are currently viewing as the background -image on your desktop, click Set as Wallpaper.

- -

This will immediately change the background to the picture you're viewing. -You will then be asked if you would like to -modify the picture's appearance using the background -preferences window. If you click Hide, the message will -disappear.

- diff -Nru eog-3.26.2/help/zh_TW/develop.page eog-3.27.90/help/zh_TW/develop.page --- eog-3.26.2/help/zh_TW/develop.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/develop.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Improve the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help develop -

- The Image Viewer is developed and maintained by a volunteer community. You are welcome to participate. -

-

- If you would like to help develop the Image Viewer, you can get in touch with the developers using irc, or via our mailing list. -

- - diff -Nru eog-3.26.2/help/zh_TW/documentation.page eog-3.27.90/help/zh_TW/documentation.page --- eog-3.26.2/help/zh_TW/documentation.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/documentation.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - Join the Documentation Team. - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - -

Creative Commons Share Alike 3.0

- - - -Help write documentation - -

- The Image Viewer documentation is maintained by a volunteer community. You are welcome to participate.

- -

To contribute to the Documentation Project, feel free to get in touch with us using irc, or via our mailing list. -

-

-Our wiki page contains useful information. -

- - - diff -Nru eog-3.26.2/help/zh_TW/edit.page eog-3.27.90/help/zh_TW/edit.page --- eog-3.26.2/help/zh_TW/edit.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/edit.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ - - - - - - Click Open With to edit a picture using an external image editor. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Edit or delete a picture - -
Edit a picture -

The image viewer can only be used to view pictures; it can't edit them. -For that, you must use a picture editing application, like the GIMP image -editor. To open a picture for editing in a different application:

- - -

Click Open With, -or right-click on the image.

- - -

Select the application you want to use to edit the picture.

- - -

When you are finished editing, save it and close the -other application.

- - -

The image viewer will detect that the -picture has been changed and will reload it.

- - -
- -
-Delete a picture -

To delete a picture that you don't want any more, -right-click the picture and select Move to Trash.

-
- - diff -Nru eog-3.26.2/help/zh_TW/flip-rotate.page eog-3.27.90/help/zh_TW/flip-rotate.page --- eog-3.26.2/help/zh_TW/flip-rotate.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/flip-rotate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,63 +0,0 @@ - - - - - - Horizontal/vertical, clockwise/counter-clockwise - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Flip or rotate pictures - -

If your pictures are the wrong way up or back-to-front, you can flip or -rotate them so that they look right.

- - -
-Flip a picture - -

Click Edit.

 -

Select either Flip Horizontal or Flip Vertical.

 - -

If you want to keep the picture flipped in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - -
- -
-Rotate a picture - -

Move the mouse pointer over the image. Two buttons with arrow will appear at the bottom.

 -

Select either Rotate the image 90 degrees to the left or Rotate -the image 90 degrees to the right.

 - -

If you want to keep the picture rotated in this way, click Save.

-

Otherwise, don't save the picture and it will be returned to its original orientation the next time you open it.

- - - -

You can also use the keyboard shortcuts:

- - - - - - - - - - -

Rotate Clockwise

CtrlR

Rotate Counter-clockwise

CtrlShiftR

- -
- diff -Nru eog-3.26.2/help/zh_TW/format-change.page eog-3.27.90/help/zh_TW/format-change.page --- eog-3.26.2/help/zh_TW/format-change.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/format-change.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,84 +0,0 @@ - - - - - - You can convert pictures from one image format to another. You can do this in a batch for multiple pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Convert to a different file format - -

Pictures are saved in a specific file format, like JPEG or PNG. You can -convert from one file format to another.

- -
- Convert a single picture to a different file format - - -

Click Save As…. The -Save Image window will pop up.

- - -

In the name field, change the file extension to the file format you want to -convert your image to. The file extension is the part of the file name after the period.

-

For example, to convert a JPEG (.jpg) file into a Bitmap file (.bmp):

-

original file: image.jpg

-

new file: image.bmp

- - -

Click Save, and a new file will be saved in the new format. The old file (in the old format) will remain where it was, and will not be deleted.

- - - -

The image viewer tries to guess which file format to save a picture in -based on the file extension you choose. If it doesn't recognize the file -extension you type, or if you don't know which one to use, click -Supported image files in the Save Image window. This will allow you to choose the file format from the drop down box. -

- -
- -
- Convert multiple pictures to a different format -

You can convert a number of pictures from one file format to another in - one go. This is useful if you have a lot of pictures that need converting.

- - -

In the image gallery, press and - hold down the Ctrl key and select the pictures you want - to convert one by one. Alternatively, press - CtrlA to select all of the pictures.

- - -

Click Save As…. A window - will appear (shown below).

- - - -

The converted pictures will be saved in the current folder by default. - If you want to save them elsewhere, change the Destination folder.

- - -

Select the file format you want to convert the pictures to from the - drop-down list to the right of the Filename format box.

- - -

Click Save.

- - -
- - diff -Nru eog-3.26.2/help/zh_TW/formats-save.page eog-3.27.90/help/zh_TW/formats-save.page --- eog-3.26.2/help/zh_TW/formats-save.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/formats-save.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - JPEG, PNG, BMP and others. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Formats supported for saving pictures -

The image viewer can save pictures in the following file formats:

- -

JPEG/JPG

 -

PNG

 -

BMP

 -

TIFF

 - -

It may be possible to save other image formats depending on the system configuration.

 - diff -Nru eog-3.26.2/help/zh_TW/formats-view.page eog-3.27.90/help/zh_TW/formats-view.page --- eog-3.26.2/help/zh_TW/formats-view.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/formats-view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - - The image viewer can display pictures in a wide range of image formats, including PNG, JPEG, and TIFF. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - Supported image formats - -

The image viewer is able to open pictures in the following formats:

- -

ANI - Animation

 -

BMP - Bitmap

 -

GIF - 圖形交換格式

 -

ICO - Windows 圖示

 -

JPEG/JPG - Joint Photographic Experts Group

 -

PCX - PC Paintbrush

 -

PNG - 可攜式網路圖形

 -

PNM - PPM 圖形檔工具箱中的圖形轉換格式

 -

RAS - Sun Raster 格式

 -

SVG - Scalable Vector Graphics

 -

TGA - Targa

 -

TIFF - 標籤影像檔案格式

 -

WBMP - Wireless Bitmap

 -

XBM - X 點陣圖

 -

XPM - X 像素對映圖

 - -

- If you try to open a picture in an unsupported format, you will get a Could -not load image 'image_name'. error. -

- diff -Nru eog-3.26.2/help/zh_TW/index.page eog-3.27.90/help/zh_TW/index.page --- eog-3.26.2/help/zh_TW/index.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ - - - - - Help for the Eye of GNOME Image Viewer. - <media its:translate="no" type="image" src="figures/eog-trail.png"/> - Eye of GNOME Image Viewer - Eye of GNOME Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - - -<media type="image" its:translate="no" src="figures/eog-logo.png">Eye of GNOME logo</media> -Eye of GNOME Image Viewer -
- View pictures -
- -
- Edit pictures -
- -
- Print pictures -
- -
- Add extra features - -
-
- Advanced -
- -
- Frequently asked questions -
- -
- Tips and tricks -
- -
- Get involved -
- diff -Nru eog-3.26.2/help/zh_TW/introduction.page eog-3.27.90/help/zh_TW/introduction.page --- eog-3.26.2/help/zh_TW/introduction.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/introduction.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Welcome to the Eye of GNOME Image Viewer. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -介紹 - -

Eye of GNOME is an image viewer. With it, you can view -pictures of almost any type. It can handle -large collections of pictures, and can -display a slideshow. You can also make basic -changes to pictures, like rotating or flipping -them, or converting them to a different file -format.

- - diff -Nru eog-3.26.2/help/zh_TW/legal.xml eog-3.27.90/help/zh_TW/legal.xml --- eog-3.26.2/help/zh_TW/legal.xml 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - - -

This work is licensed under a -Creative Commons -Attribution-Share Alike 3.0 United States License.

-

As a special exception, the copyright holders give you permission to copy, -modify, and distribute the example code contained in this document under the -terms of your choosing, without restriction.

- diff -Nru eog-3.26.2/help/zh_TW/license.page eog-3.27.90/help/zh_TW/license.page --- eog-3.26.2/help/zh_TW/license.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/license.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ - - - - - - - Legal information. - - - License -

- - This work is distributed under a CreativeCommons Attribution-Share Alike - 3.0 Unported license. -

-

- You are free: -

- - - <em>To share</em> -

To copy, distribute and transmit the work.

- - - <em>To remix</em> -

To adapt the work.

- - -

- Under the following conditions: -

- - - <em>Attribution</em> -

- You must attribute the work in the manner specified by the author or - licensor (but not in any way that suggests that they endorse you or - your use of the work). -

- - - <em>Share Alike</em> -

- If you alter, transform, or build upon this work, you may distribute the - resulting work only under the same, similar or a compatible license. -

- - -

- - For the full text of the license, see the - CreativeCommons website, - or read the full Commons Deed. -

- diff -Nru eog-3.26.2/help/zh_TW/open.page eog-3.27.90/help/zh_TW/open.page --- eog-3.26.2/help/zh_TW/open.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/open.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Pictures open in a new window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Open a picture - -

Pictures should automatically open in the image viewer when you -double-click them in the files file browser. If this is not the -case, you may need to make the image viewer the -default application for viewing pictures.

- -

Each picture you double-click will open in a new image viewer window by -default, but you can view multiple pictures in one -window if you like.

- -

You can also open pictures from within the image viewer itself:

- -

Click Open… (or -press CtrlO). The Open -Image window will appear.

 -

Select the picture you want to open and click Open.

 - - - diff -Nru eog-3.26.2/help/zh_TW/plugin-exif-digital.page eog-3.27.90/help/zh_TW/plugin-exif-digital.page --- eog-3.26.2/help/zh_TW/plugin-exif-digital.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/plugin-exif-digital.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,96 +0,0 @@ - - - - - - View information such as camera settings and histogram, geolocation, and date. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -View detailed information about a picture - -

Pictures taken by digital cameras are stored with a host of extra -information embedded in them, such as the date that they were taken, what -exposure settings were used on the camera and, in some cases, even where the -picture was taken.

- -

This topic shows you how to access this information.

- -
-Show the date in the status bar - -

You can display the date that a picture was taken in the status bar at - the bottom of the window.

-

To do this, open the application menu on the - top bar, click Preferences and go to the - Plugins tab. Then, check Date in statusbar.

-
- -
- Detailed Exif data -

The detailed information stored with digital photos is called Exif - data. You can view it by installing a plugin for the image viewer.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar and click Preferences. Then, check - Exif display and close the dialog.

- - -

Enable the Side Pane to view the - camera settings used to take the photo. To also view histograms showing the balance - of colors and light/shade in the picture, select Exif display in the - Plugins tab and click Preferences. Check the histograms you - want to view, listed under Histogram.

- - -

You can also view the camera settings used to take the photo in the statusbar. - Select Exif display in the Plugins tab and click - Preferences. Check Display camera settings in statusbar.

- - -
- -
- Display a photo location map -

Some cameras are able to attach geolocation information - (geotags) to digital photos. Geotags are usually just the GPS coordinates - (latitude and longitude) for the place where a photo was taken.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

If eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab. Then, check Map and close the dialog.

- - -

Enable the Side Pane to show the map.

- - -

The map will show the location that a picture was taken in only if there - is geolocation information attached to the photo. Many cameras do not attach - geolocation information to pictures.

-
- - - diff -Nru eog-3.26.2/help/zh_TW/plugin-fullscreen-background.page eog-3.27.90/help/zh_TW/plugin-fullscreen-background.page --- eog-3.26.2/help/zh_TW/plugin-fullscreen-background.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/plugin-fullscreen-background.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ - - - - - - Enables changing background color in fullscreen mode. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Change fullscreen background color - -

If you like, you can change the background color in fullscreen mode.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen Background and click Preferences. -Choose the color you want in fullscreen mode and close the dialog.

- -

Now, when in fullscreen mode, the background color is the one you selected.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/zh_TW/plugin-fullscreen-double-click.page eog-3.27.90/help/zh_TW/plugin-fullscreen-double-click.page --- eog-3.26.2/help/zh_TW/plugin-fullscreen-double-click.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/plugin-fullscreen-double-click.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Activate fullscreen mode by double-clicking a picture. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Full-screen with double-click - - - -

If you like, you can make it so that pictures are shown full-screen when -you double-click them in the image viewer.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Fullscreen with double-click and close the dialog.

- -

Now, double-clicking on an image will toggle between the fullscreen and -normal (window) modes.

- - diff -Nru eog-3.26.2/help/zh_TW/plugin-picasa.page eog-3.27.90/help/zh_TW/plugin-picasa.page --- eog-3.26.2/help/zh_TW/plugin-picasa.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/plugin-picasa.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Easily upload pictures to PicasaWeb directly from the Image Viewer. - - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Upload photos to <app>PicasaWeb</app> - -

PicasaWeb is a photo album service that lets you share pictures with -people online. You can add a shortcut button that provides a convenient way of uploading -pictures to PicasaWeb.

- -

To do this, open the application menu on the top bar, click -Preferences, go to the Plugins tab, and check -PicasaWeb Uploader.

-

This will give you a convenient Upload to -PicasaWeb menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/zh_TW/plugin-python-console.page eog-3.27.90/help/zh_TW/plugin-python-console.page --- eog-3.26.2/help/zh_TW/plugin-python-console.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/plugin-python-console.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - The Python console can be used to add extra functions and run scripts in the image viewer. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Python console - -

The image viewer has a plugin system which uses the Python scripting - language. If you activate the Python console, you can gain direct - access to a Python interpreter from inside the image viewer, which you can - then use to write scripts or programmatically manipulate images, for example.

- - - -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Once eog-plugins is installed, open the application menu on the - top bar, click Preferences, and go to the - Plugins tab.

- - -

Check Python Console and click Close.

- - -

Click the Python Console menu item to - bring up the console.

- - - - diff -Nru eog-3.26.2/help/zh_TW/plugin-send-by-mail.page eog-3.27.90/help/zh_TW/plugin-send-by-mail.page --- eog-3.26.2/help/zh_TW/plugin-send-by-mail.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/plugin-send-by-mail.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Easily send pictures by attaching them to a new email. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Send pictures by email - -

You can add a button that provides a convenient way of sending pictures to -people by email.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins -tab. Then, check Send By Mail and click Close. This -will give you a Send by mail menu item.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - -

Evolution mail must be set up to connect to your email account - for this to work.

- - - - - diff -Nru eog-3.26.2/help/zh_TW/plugin-slideshow-shuffle.page eog-3.27.90/help/zh_TW/plugin-slideshow-shuffle.page --- eog-3.26.2/help/zh_TW/plugin-slideshow-shuffle.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/plugin-slideshow-shuffle.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - - Show photos in a random order when playing a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow shuffle - -

You can make it so that pictures are shown in a random order when you start -a slideshow.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Slideshow Shuffle and close the dialog.

- -

In order to enable this feature, you need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/zh_TW/plugins.page eog-3.27.90/help/zh_TW/plugins.page --- eog-3.26.2/help/zh_TW/plugins.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/plugins.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ - - - - - - Install plugins to access extra features. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - - Fabiana Simões - fabianapsimoes@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Plugins - -

You can install the eog-plugins package to get extra plugins for -the image viewer. Plugins add additional features, like the ones listed below.

- - -

You can install the eog-plugins package using your Linux - distribution's package manager.

- - - -

install eog-plugins

- - - - -

The following features are included in eog-plugins:

- - - -

Date in statusbar: Shows the image date in the window statusbar.

- - -

Exif display: Displays -camera settings and histograms for digital photos.

- - -

Fullscreen Background: Enables changing -background in fullscreen mode.

- - -

Fullscreen with double-click: Activate fullscreen mode with double-click.

- - -

Map: Display the - geolocation of a digital photo on a map.

- - -

PicasaWeb Uploader: Upload your pictures to PicasaWeb.

- - -

Python Console: -A Python scripting console for the image viewer.

- - -

Send By Mail: Send a picture to - a friend by attaching it to a new email.

- - -

Slideshow Shuffle: Shuffles - images in slideshow mode.

- - -

Zoom to fit image width: -Adjusts the zoom to have the pictures's full width fit into the window.

- - - - -

You can manage plugins by using the the - Plugins tab in the Preferences window.

- - - diff -Nru eog-3.26.2/help/zh_TW/plugin-zoom-width.page eog-3.27.90/help/zh_TW/plugin-zoom-width.page --- eog-3.26.2/help/zh_TW/plugin-zoom-width.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/plugin-zoom-width.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Adjusts the zoom to fit a picture's full width into the window. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom to fit picture width - -

Activate the Zoom to fit image width plugin if you want pictures -to be expanded to fill the full width of the window.

- -

To do this, open the application menu on the top bar, click -Preferences, and go to the Plugins tab. -Then, check Zoom to fit image width and close the dialog.

- -

In order to add this functionality, you will need to have installed eog-plugins.

- - diff -Nru eog-3.26.2/help/zh_TW/preferences.page eog-3.27.90/help/zh_TW/preferences.page --- eog-3.26.2/help/zh_TW/preferences.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/preferences.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,115 +0,0 @@ - - - - - - Image view, slideshow and plugins. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -個人喜好 -

This topic explains all of the settings that you can change in the -image viewer. Open the application menu on the top bar and click -Preferences to start changing the preferences.

- - - -
-Image view preferences - - - - Image enhancements -

Select Smooth images when zoomed out to enable image - smoothing when you zoom in and out. This makes low-resolution - (pixelated) pictures look better by smoothing out jagged edges.

-

If you enable Automatic orientation, pictures will be - automatically rotated according to their Exif metadata. This is - information about a picture that is automatically inserted by a digital - camera, and can include details on which way up the camera was held when - the picture was taken. For example, when automatic orientation is - enabled, portrait photos are automatically rotated upright. The rotation - is not saved until you save the rotated - image.

-

Automatic orientation does not work with all pictures; only pictures - taken using a camera that saves Exif orientation metadata will be rotated.

- - - Transparent parts -

Select one of the following - options to determine how the transparent parts of a picture are displayed, - if it has any:

- - -

As check pattern:

-

Displays any transparent parts of the image in a check pattern.

- - -

As custom color:

-

Displays any transparent parts of the image in a solid color that - you specify by clicking on the color selector button.

- - -

As background:

-

Displays any transparent parts of the image in the - Background color, if As custom color under - Background is checked. Otherwise, the default background - color is used.

- - - - -
- - -
-Slide show preferences - -

To customize slideshow settings:

- - -

Under Image Zoom you can select if you would like pictures - that are smaller than the screen to be expanded so that they fit the - screen.

- - -

Under Sequence you can select how many seconds each picture - should be displayed for (between 1 and 100) before the next picture is - shown.

- - -

Check Loop sequence if you want the slideshow to repeat - continuously. If unchecked, the slideshow will start at the picture you - selected, and finish at the last picture in the folder.

- - -
- - -
-Plugin preferences - - - - -

Here you can check/uncheck any additional features you would like -to activate or deactivate. The picture on the left shows the plugins that are -available by default.

- -

You may also wish to install the -eog-plugins package, which contains plugins -providing a number of extra features. After installing it, you will be able to -activate additional plugins, like the ones -shown in the picture on the right.

-
- - diff -Nru eog-3.26.2/help/zh_TW/print.page eog-3.27.90/help/zh_TW/print.page --- eog-3.26.2/help/zh_TW/print.page 2017-08-10 20:19:29.000000000 +0000 +++ eog-3.27.90/help/zh_TW/print.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,54 +0,0 @@ - - - - - - Click Print… and then use the tabs to change print settings. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Print a picture - -

To print the picture that you are currently viewing:

- - - -

Click Print….

- - -

Under the General tab, choose the printer you want to use and - the number of copies you want to print.

- - -

If you go to the Image Settings tab, you can -adjust the Position and Size of the picture.

-

The position of the image on the page can also be adjusted by dragging - it around in the preview.

- - -

If you are using high-quality photo paper, go to the Page Setup - tab and select the correct Paper Type. You should also go to the - Image Quality tab and choose a high quality setting, so that you - get the best possible photo quality.

- - -

Click Print.

- - - -

Note that some of the tabs mentioned above are not displayed for certain -printer models. This is because the printer drivers for those -printers don't allow some settings to be changed. So, for example, if you don't -see an Image Quality tab, that probably means that the printer -drivers that are being used don't support those settings.

- - diff -Nru eog-3.26.2/help/zh_TW/rename-multiple.page eog-3.27.90/help/zh_TW/rename-multiple.page --- eog-3.26.2/help/zh_TW/rename-multiple.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_TW/rename-multiple.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,78 +0,0 @@ - - - - - - - Automatically rename and number batches of pictures. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Rename many pictures at once - -

If you have lots of pictures that you want to rename, perhaps so that they have a standard, numbered name format:

- - - -

Open the image gallery by pressing - F9.

- - -

Select all of the pictures that you would like to rename from the image - gallery by holding down Ctrl and clicking them one by one.

-

Alternatively, press CtrlA to select - all of the pictures.

- - -

Click Save as…. A window with - some filename options will appear (the picture, below, shows what this window - looks like).

- - -

The renamed pictures will be saved in the current folder by default. To -save them elsewhere, change the Destination folder.

- - -

Use the Filename format box to choose a naming format for the - pictures. The File Name Preview shows you what the new filenames - will look like. See the section, below, for advice on choosing how to rename the files.

- - -

Ensure that the Filename Format drop-down list says - as is, unless you want to convert the pictures to a different file format.

- - -

Click Save As and the pictures will be renamed.

- - - - - -
- Choose a filename format -

The filenames of the renamed files are determined by what you put in the - Filename format box.

- - -

You can keep the original filename as part of the new filename by leaving - the %f in the box.

-

For example, if you type paris_%f into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to paris_flower.jpg, paris_house.jpg, and paris_cat.jpg.

- - -

Adding a %n will number the pictures consecutively, - starting at the counter number you choose under Options.

-

For example, if you type sunshine_%n into the Filename format box, pictures called flower.jpg, house.jpg, and cat.jpg would be renamed to sunshine_2.jpg, sunshine_3.jpg, and sunshine_1.jpg. (They will be numbered by alphabetical order of the original filenames.)

- - -
- - diff -Nru eog-3.26.2/help/zh_TW/shortcuts.page eog-3.27.90/help/zh_TW/shortcuts.page --- eog-3.26.2/help/zh_TW/shortcuts.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_TW/shortcuts.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ - - - - - - A list of all keyboard shortcuts. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Keyboard shortcuts - -

This is a list of all of the keyboard shortcuts that you can use in the -image viewer.

- -
- Opening, closing, saving and printing - - - - - - - - - - - - - - - - - - - - - - - - - -

Open an image file

CtrlO

Save the image with the same filename

CtrlS

Save a copy of the current image with a new file -name

ShiftCtrlS

Print the current image

CtrlP

Close the current window

CtrlW

Set the image as your desktop background

CtrlF8

-
- -
- Viewing images - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Go to the previous image in the folder

Back space / Left

Go to the next image in the folder

Space bar / Right

Go to first image in the folder

AltHome

Go to the last image in the folder

AltEnd

Choose a random image in the folder

CtrlM

View the image gallery

F9

View fullscreen

F11

View slideshow

F5

Actual size

Ctrl0 (Zero)

Best fit

F

Scroll around a large image

Altarrow keys

-
- -
- Copy an image to paste into another application - - - - - -

Copy

CtrlC

-
- -
- Zoom and rotate - - - - - - - - - - - - - - - - - -

Zoom in

+

Zoom out

-

Rotate clockwise

CtrlR

Rotate counter-clockwise

ShiftCtrlR

-
- -
- Other - - - - - - - - - - - - - - - - - -

View side pane

CtrlF9

View image properties

AltReturn

Undo

CtrlZ

Help

F1

-
- diff -Nru eog-3.26.2/help/zh_TW/slideshow.page eog-3.27.90/help/zh_TW/slideshow.page --- eog-3.26.2/help/zh_TW/slideshow.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_TW/slideshow.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ - - - - - - - - Click Slideshow to show all of the pictures in a folder as a slideshow. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - - - -Slideshow - -

To view all of the pictures in a folder as a slideshow:

- - - -

Open one of the pictures from the folder.

- - -

Click Slideshow or press - F5.

-

A full-screen slideshow will start. Every few seconds a new picture will - be displayed. If you would like to move through the slideshow more quickly, or return to an image which has already been displayed, you can use the Left and Right arrow keys to manually move backward and forward.

- - -

To quit the slideshow, press Esc or F5.

- - - -

You can change slideshow settings like how long it should show each picture -for. See the topic on slideshow -preferences for more information.

- - diff -Nru eog-3.26.2/help/zh_TW/translate.page eog-3.27.90/help/zh_TW/translate.page --- eog-3.26.2/help/zh_TW/translate.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_TW/translate.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,38 +0,0 @@ - - - - - - Localize the Image Viewer - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - 2011 - - - Michael Hill - mdhillca@gmail.com - - -

Creative Commons Share Alike 3.0

- - - -Help translate -

- The Image Viewer user interface and documentation is being translated by a world-wide volunteer community. You are welcome to participate. -

-

- There are many languages for which translations are still needed. -

-

-To start translating you will need to create an account and join the translation team for your language. This will give you the ability to upload new translations. -

- -

- You can chat with GNOME translators using irc. People on the channel are located worldwide, so you may not get an immediate response as a result of timezone differences. -

-

Alternatively, you can contact the Internationalization Team using their mailing list. -

- diff -Nru eog-3.26.2/help/zh_TW/view.page eog-3.27.90/help/zh_TW/view.page --- eog-3.26.2/help/zh_TW/view.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_TW/view.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ - - - - - - Press Left and Right to flip between pictures, or use the image gallery to show them all. - - - - Tiffany Antopolski - tiffany.antopolski@gmail.com - - -

Creative Commons Share Alike 3.0

- - -View all pictures in a folder - -

You can quickly browse through all of the pictures in a folder by opening one of the pictures and then clicking the Next and Previous buttons on the left and right of the displayed image (for example). You can also view an image gallery, with small previews of all of the pictures in a folder shown at once.

- -
- Browse through all pictures in a folder -

If you have a folder containing several pictures, you can conveniently - browse through all of the pictures without having to open them individually.

- - -

Open any one of the pictures from the folder - you want to browse through.

- - -

Click Next and Previous on the left and right of - the displayed image, or press the Right and - Left keys, to flip between pictures.

-

Alternatively, you can use the Up and Down keys, - or Space bar and Backspace keys.

- - -

You can browse through the pictures in fullscreen mode by clicking the -Fullscreen button in the title bar or by pressing -F11. Use the keyboard keys to flip between pictures in fullscreen -mode.

-

To return to normal viewing, press Esc or F11.

- - -
- - - - diff -Nru eog-3.26.2/help/zh_TW/zoom.page eog-3.27.90/help/zh_TW/zoom.page --- eog-3.26.2/help/zh_TW/zoom.page 2017-08-10 20:19:30.000000000 +0000 +++ eog-3.27.90/help/zh_TW/zoom.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ - - - - - - - Enlarge the picture on the screen. - - - - Tiffany Antopolski - tiffany@antopolski.com - - -

Creative Commons Share Alike 3.0

- - - - -Zoom - -

You can zoom in and out to show more or less of a picture on the screen at once. This is useful if you want to see a big picture in its entirety, or if you want to inspect the fine details of a picture.

- - - -

You can zoom using the mouse wheel. Scroll up to zoom in or scroll down to zoom out.

- - -

You can also zoom using the buttons in the title bar. To zoom in, click the - Enlarge the image icon, and to zoom out click the Shrink the - image icon. These look like "plus" and "minus" signs.

- - -

Alternatively, use the keyboard shortcuts Ctrl+ or - Ctrl-.

- - - -

To view the picture in its original, unscaled size, choose the -100% zoom level from the dropdown in the title bar. -Alternatively, use the keyboard shortcuts Ctrl0 or -1.

- -
- Zoom to best-fit the window -

You can choose to zoom in so that the picture fits fully in the window, - even if you resize it. Enable Best fit - in the dropdown in the title bar to do this.

-
- diff -Nru eog-3.26.2/install-sh eog-3.27.90/install-sh --- eog-3.26.2/install-sh 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/install-sh 1970-01-01 00:00:00.000000000 +0000 @@ -1,501 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2016-01-11.22; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# 'make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -tab=' ' -nl=' -' -IFS=" $tab$nl" - -# Set DOITPROG to "echo" to test this script. - -doit=${DOITPROG-} -doit_exec=${doit:-exec} - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -is_target_a_directory=possibly - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) - is_target_a_directory=always - dst_arg=$2 - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; - - -T) is_target_a_directory=never;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -# We allow the use of options -d and -T together, by making -d -# take the precedence; this is for compatibility with GNU install. - -if test -n "$dir_arg"; then - if test -n "$dst_arg"; then - echo "$0: target directory not allowed when installing a directory." >&2 - exit 1 - fi -fi - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call 'install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - if test $# -gt 1 || test "$is_target_a_directory" = always; then - if test ! -d "$dst_arg"; then - echo "$0: $dst_arg: Is not a directory." >&2 - exit 1 - fi - fi -fi - -if test -z "$dir_arg"; then - do_exit='(exit $ret); exit $ret' - trap "ret=129; $do_exit" 1 - trap "ret=130; $do_exit" 2 - trap "ret=141; $do_exit" 13 - trap "ret=143; $do_exit" 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names problematic for 'test' and other utilities. - case $src in - -* | [=\(\)!]) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - dst=$dst_arg - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test "$is_target_a_directory" = never; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - dstdir=`dirname "$dst"` - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; - esac - - oIFS=$IFS - IFS=/ - set -f - set fnord $dstdir - shift - set +f - IFS=$oIFS - - prefixes= - - for d - do - test X"$d" = X && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - set +f && - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC0" -# time-stamp-end: "; # UTC" -# End: diff -Nru eog-3.26.2/jpegutils/Makefile.am eog-3.27.90/jpegutils/Makefile.am --- eog-3.26.2/jpegutils/Makefile.am 2017-11-08 20:33:41.000000000 +0000 +++ eog-3.27.90/jpegutils/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ -AM_CPPFLAGS = $(EOG_CFLAGS) \ - $(EXIF_CFLAGS) - -noinst_LTLIBRARIES = libeog-jpegutils.la - -libeog_jpegutils_la_SOURCES = \ - jpegint.h \ - transupp.h - -if HAVE_LIBJPEG_80 -libeog_jpegutils_la_SOURCES += \ - jpegint-8a.h \ - transupp-8a.c \ - transupp-8a.h -else -libeog_jpegutils_la_SOURCES += \ - transupp-6b.c \ - transupp-6b.h -endif - -EXTRA_DIST = README.6b README.8a - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/jpegutils/Makefile.in eog-3.27.90/jpegutils/Makefile.in --- eog-3.26.2/jpegutils/Makefile.in 2017-11-08 20:34:24.000000000 +0000 +++ eog-3.27.90/jpegutils/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,684 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -@HAVE_LIBJPEG_80_TRUE@am__append_1 = \ -@HAVE_LIBJPEG_80_TRUE@ jpegint-8a.h \ -@HAVE_LIBJPEG_80_TRUE@ transupp-8a.c \ -@HAVE_LIBJPEG_80_TRUE@ transupp-8a.h - -@HAVE_LIBJPEG_80_FALSE@am__append_2 = \ -@HAVE_LIBJPEG_80_FALSE@ transupp-6b.c \ -@HAVE_LIBJPEG_80_FALSE@ transupp-6b.h - -subdir = jpegutils -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) -libeog_jpegutils_la_LIBADD = -am__libeog_jpegutils_la_SOURCES_DIST = jpegint.h transupp.h \ - jpegint-8a.h transupp-8a.c transupp-8a.h transupp-6b.c \ - transupp-6b.h -@HAVE_LIBJPEG_80_TRUE@am__objects_1 = transupp-8a.lo -@HAVE_LIBJPEG_80_FALSE@am__objects_2 = transupp-6b.lo -am_libeog_jpegutils_la_OBJECTS = $(am__objects_1) $(am__objects_2) -libeog_jpegutils_la_OBJECTS = $(am_libeog_jpegutils_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libeog_jpegutils_la_SOURCES) -DIST_SOURCES = $(am__libeog_jpegutils_la_SOURCES_DIST) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -AM_CPPFLAGS = $(EOG_CFLAGS) \ - $(EXIF_CFLAGS) - -noinst_LTLIBRARIES = libeog-jpegutils.la -libeog_jpegutils_la_SOURCES = jpegint.h transupp.h $(am__append_1) \ - $(am__append_2) -EXTRA_DIST = README.6b README.8a -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign jpegutils/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign jpegutils/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libeog-jpegutils.la: $(libeog_jpegutils_la_OBJECTS) $(libeog_jpegutils_la_DEPENDENCIES) $(EXTRA_libeog_jpegutils_la_DEPENDENCIES) - $(AM_V_CCLD)$(LINK) $(libeog_jpegutils_la_OBJECTS) $(libeog_jpegutils_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transupp-6b.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transupp-8a.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - -.PRECIOUS: Makefile - - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/jpegutils/meson.build eog-3.27.90/jpegutils/meson.build --- eog-3.26.2/jpegutils/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/jpegutils/meson.build 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,16 @@ +if have_jpeg_80 + sources = files('transupp-8a.c') +else + sources = files('transupp-6b.c') +endif + +libjpegutils = static_library( + 'eog-jpegutils', + sources: sources, + include_directories: top_inc +) + +jpeg_deps += declare_dependency( + link_with: libjpegutils, + include_directories: include_directories('.') +) diff -Nru eog-3.26.2/ltmain.sh eog-3.27.90/ltmain.sh --- eog-3.26.2/ltmain.sh 2017-11-08 19:35:52.000000000 +0000 +++ eog-3.27.90/ltmain.sh 1970-01-01 00:00:00.000000000 +0000 @@ -1,11147 +0,0 @@ -#! /bin/sh -## DO NOT EDIT - This file generated from ./build-aux/ltmain.in -## by inline-source v2014-01-03.01 - -# libtool (GNU libtool) 2.4.6 -# Provide generalized library-building support services. -# Written by Gordon Matzigkeit , 1996 - -# Copyright (C) 1996-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - - -PROGRAM=libtool -PACKAGE=libtool -VERSION=2.4.6 -package_revision=2.4.6 - - -## ------ ## -## Usage. ## -## ------ ## - -# Run './libtool --help' for help with using this script from the -# command line. - - -## ------------------------------- ## -## User overridable command paths. ## -## ------------------------------- ## - -# After configure completes, it has a better idea of some of the -# shell tools we need than the defaults used by the functions shared -# with bootstrap, so set those here where they can still be over- -# ridden by the user, but otherwise take precedence. - -: ${AUTOCONF="autoconf"} -: ${AUTOMAKE="automake"} - - -## -------------------------- ## -## Source external libraries. ## -## -------------------------- ## - -# Much of our low-level functionality needs to be sourced from external -# libraries, which are installed to $pkgauxdir. - -# Set a version string for this script. -scriptversion=2015-01-20.17; # UTC - -# General shell script boiler plate, and helper functions. -# Written by Gary V. Vaughan, 2004 - -# Copyright (C) 2004-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. - -# As a special exception to the GNU General Public License, if you distribute -# this file as part of a program or library that is built using GNU Libtool, -# you may include this file under the same distribution terms that you use -# for the rest of that program. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# Please report bugs or propose patches to gary@gnu.org. - - -## ------ ## -## Usage. ## -## ------ ## - -# Evaluate this file near the top of your script to gain access to -# the functions and variables defined here: -# -# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh -# -# If you need to override any of the default environment variable -# settings, do that before evaluating this file. - - -## -------------------- ## -## Shell normalisation. ## -## -------------------- ## - -# Some shells need a little help to be as Bourne compatible as possible. -# Before doing anything else, make sure all that help has been provided! - -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac -fi - -# NLS nuisances: We save the old values in case they are required later. -_G_user_locale= -_G_safe_locale= -for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -do - eval "if test set = \"\${$_G_var+set}\"; then - save_$_G_var=\$$_G_var - $_G_var=C - export $_G_var - _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" - _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" - fi" -done - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Make sure IFS has a sensible default -sp=' ' -nl=' -' -IFS="$sp $nl" - -# There are apparently some retarded systems that use ';' as a PATH separator! -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - - -## ------------------------- ## -## Locate command utilities. ## -## ------------------------- ## - - -# func_executable_p FILE -# ---------------------- -# Check that FILE is an executable regular file. -func_executable_p () -{ - test -f "$1" && test -x "$1" -} - - -# func_path_progs PROGS_LIST CHECK_FUNC [PATH] -# -------------------------------------------- -# Search for either a program that responds to --version with output -# containing "GNU", or else returned by CHECK_FUNC otherwise, by -# trying all the directories in PATH with each of the elements of -# PROGS_LIST. -# -# CHECK_FUNC should accept the path to a candidate program, and -# set $func_check_prog_result if it truncates its output less than -# $_G_path_prog_max characters. -func_path_progs () -{ - _G_progs_list=$1 - _G_check_func=$2 - _G_PATH=${3-"$PATH"} - - _G_path_prog_max=0 - _G_path_prog_found=false - _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} - for _G_dir in $_G_PATH; do - IFS=$_G_save_IFS - test -z "$_G_dir" && _G_dir=. - for _G_prog_name in $_G_progs_list; do - for _exeext in '' .EXE; do - _G_path_prog=$_G_dir/$_G_prog_name$_exeext - func_executable_p "$_G_path_prog" || continue - case `"$_G_path_prog" --version 2>&1` in - *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; - *) $_G_check_func $_G_path_prog - func_path_progs_result=$func_check_prog_result - ;; - esac - $_G_path_prog_found && break 3 - done - done - done - IFS=$_G_save_IFS - test -z "$func_path_progs_result" && { - echo "no acceptable sed could be found in \$PATH" >&2 - exit 1 - } -} - - -# We want to be able to use the functions in this file before configure -# has figured out where the best binaries are kept, which means we have -# to search for them ourselves - except when the results are already set -# where we skip the searches. - -# Unless the user overrides by setting SED, search the path for either GNU -# sed, or the sed that truncates its output the least. -test -z "$SED" && { - _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for _G_i in 1 2 3 4 5 6 7; do - _G_sed_script=$_G_sed_script$nl$_G_sed_script - done - echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed - _G_sed_script= - - func_check_prog_sed () - { - _G_path_prog=$1 - - _G_count=0 - printf 0123456789 >conftest.in - while : - do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo '' >> conftest.nl - "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break - diff conftest.out conftest.nl >/dev/null 2>&1 || break - _G_count=`expr $_G_count + 1` - if test "$_G_count" -gt "$_G_path_prog_max"; then - # Best one so far, save it but keep looking for a better one - func_check_prog_result=$_G_path_prog - _G_path_prog_max=$_G_count - fi - # 10*(2^10) chars as input seems more than enough - test 10 -lt "$_G_count" && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out - } - - func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin - rm -f conftest.sed - SED=$func_path_progs_result -} - - -# Unless the user overrides by setting GREP, search the path for either GNU -# grep, or the grep that truncates its output the least. -test -z "$GREP" && { - func_check_prog_grep () - { - _G_path_prog=$1 - - _G_count=0 - _G_path_prog_max=0 - printf 0123456789 >conftest.in - while : - do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo 'GREP' >> conftest.nl - "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break - diff conftest.out conftest.nl >/dev/null 2>&1 || break - _G_count=`expr $_G_count + 1` - if test "$_G_count" -gt "$_G_path_prog_max"; then - # Best one so far, save it but keep looking for a better one - func_check_prog_result=$_G_path_prog - _G_path_prog_max=$_G_count - fi - # 10*(2^10) chars as input seems more than enough - test 10 -lt "$_G_count" && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out - } - - func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin - GREP=$func_path_progs_result -} - - -## ------------------------------- ## -## User overridable command paths. ## -## ------------------------------- ## - -# All uppercase variable names are used for environment variables. These -# variables can be overridden by the user before calling a script that -# uses them if a suitable command of that name is not already available -# in the command search PATH. - -: ${CP="cp -f"} -: ${ECHO="printf %s\n"} -: ${EGREP="$GREP -E"} -: ${FGREP="$GREP -F"} -: ${LN_S="ln -s"} -: ${MAKE="make"} -: ${MKDIR="mkdir"} -: ${MV="mv -f"} -: ${RM="rm -f"} -: ${SHELL="${CONFIG_SHELL-/bin/sh}"} - - -## -------------------- ## -## Useful sed snippets. ## -## -------------------- ## - -sed_dirname='s|/[^/]*$||' -sed_basename='s|^.*/||' - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='s|\([`"$\\]\)|\\\1|g' - -# Same as above, but do not quote variable references. -sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' - -# Sed substitution that converts a w32 file name or path -# that contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - -# Re-'\' parameter expansions in output of sed_double_quote_subst that -# were '\'-ed in input to the same. If an odd number of '\' preceded a -# '$' in input to sed_double_quote_subst, that '$' was protected from -# expansion. Since each input '\' is now two '\'s, look for any number -# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. -_G_bs='\\' -_G_bs2='\\\\' -_G_bs4='\\\\\\\\' -_G_dollar='\$' -sed_double_backslash="\ - s/$_G_bs4/&\\ -/g - s/^$_G_bs2$_G_dollar/$_G_bs&/ - s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g - s/\n//g" - - -## ----------------- ## -## Global variables. ## -## ----------------- ## - -# Except for the global variables explicitly listed below, the following -# functions in the '^func_' namespace, and the '^require_' namespace -# variables initialised in the 'Resource management' section, sourcing -# this file will not pollute your global namespace with anything -# else. There's no portable way to scope variables in Bourne shell -# though, so actually running these functions will sometimes place -# results into a variable named after the function, and often use -# temporary variables in the '^_G_' namespace. If you are careful to -# avoid using those namespaces casually in your sourcing script, things -# should continue to work as you expect. And, of course, you can freely -# overwrite any of the functions or variables defined here before -# calling anything to customize them. - -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -# Allow overriding, eg assuming that you follow the convention of -# putting '$debug_cmd' at the start of all your functions, you can get -# bash to show function call trace with: -# -# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name -debug_cmd=${debug_cmd-":"} -exit_cmd=: - -# By convention, finish your script with: -# -# exit $exit_status -# -# so that you can set exit_status to non-zero if you want to indicate -# something went wrong during execution without actually bailing out at -# the point of failure. -exit_status=$EXIT_SUCCESS - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath=$0 - -# The name of this program. -progname=`$ECHO "$progpath" |$SED "$sed_basename"` - -# Make sure we have an absolute progpath for reexecution: -case $progpath in - [\\/]*|[A-Za-z]:\\*) ;; - *[\\/]*) - progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` - progdir=`cd "$progdir" && pwd` - progpath=$progdir/$progname - ;; - *) - _G_IFS=$IFS - IFS=${PATH_SEPARATOR-:} - for progdir in $PATH; do - IFS=$_G_IFS - test -x "$progdir/$progname" && break - done - IFS=$_G_IFS - test -n "$progdir" || progdir=`pwd` - progpath=$progdir/$progname - ;; -esac - - -## ----------------- ## -## Standard options. ## -## ----------------- ## - -# The following options affect the operation of the functions defined -# below, and should be set appropriately depending on run-time para- -# meters passed on the command line. - -opt_dry_run=false -opt_quiet=false -opt_verbose=false - -# Categories 'all' and 'none' are always available. Append any others -# you will pass as the first argument to func_warning from your own -# code. -warning_categories= - -# By default, display warnings according to 'opt_warning_types'. Set -# 'warning_func' to ':' to elide all warnings, or func_fatal_error to -# treat the next displayed warning as a fatal error. -warning_func=func_warn_and_continue - -# Set to 'all' to display all warnings, 'none' to suppress all -# warnings, or a space delimited list of some subset of -# 'warning_categories' to display only the listed warnings. -opt_warning_types=all - - -## -------------------- ## -## Resource management. ## -## -------------------- ## - -# This section contains definitions for functions that each ensure a -# particular resource (a file, or a non-empty configuration variable for -# example) is available, and if appropriate to extract default values -# from pertinent package files. Call them using their associated -# 'require_*' variable to ensure that they are executed, at most, once. -# -# It's entirely deliberate that calling these functions can set -# variables that don't obey the namespace limitations obeyed by the rest -# of this file, in order that that they be as useful as possible to -# callers. - - -# require_term_colors -# ------------------- -# Allow display of bold text on terminals that support it. -require_term_colors=func_require_term_colors -func_require_term_colors () -{ - $debug_cmd - - test -t 1 && { - # COLORTERM and USE_ANSI_COLORS environment variables take - # precedence, because most terminfo databases neglect to describe - # whether color sequences are supported. - test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} - - if test 1 = "$USE_ANSI_COLORS"; then - # Standard ANSI escape sequences - tc_reset='' - tc_bold=''; tc_standout='' - tc_red=''; tc_green='' - tc_blue=''; tc_cyan='' - else - # Otherwise trust the terminfo database after all. - test -n "`tput sgr0 2>/dev/null`" && { - tc_reset=`tput sgr0` - test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` - tc_standout=$tc_bold - test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` - test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` - test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` - test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` - test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` - } - fi - } - - require_term_colors=: -} - - -## ----------------- ## -## Function library. ## -## ----------------- ## - -# This section contains a variety of useful functions to call in your -# scripts. Take note of the portable wrappers for features provided by -# some modern shells, which will fall back to slower equivalents on -# less featureful shells. - - -# func_append VAR VALUE -# --------------------- -# Append VALUE onto the existing contents of VAR. - - # We should try to minimise forks, especially on Windows where they are - # unreasonably slow, so skip the feature probes when bash or zsh are - # being used: - if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then - : ${_G_HAVE_ARITH_OP="yes"} - : ${_G_HAVE_XSI_OPS="yes"} - # The += operator was introduced in bash 3.1 - case $BASH_VERSION in - [12].* | 3.0 | 3.0*) ;; - *) - : ${_G_HAVE_PLUSEQ_OP="yes"} - ;; - esac - fi - - # _G_HAVE_PLUSEQ_OP - # Can be empty, in which case the shell is probed, "yes" if += is - # useable or anything else if it does not work. - test -z "$_G_HAVE_PLUSEQ_OP" \ - && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ - && _G_HAVE_PLUSEQ_OP=yes - -if test yes = "$_G_HAVE_PLUSEQ_OP" -then - # This is an XSI compatible shell, allowing a faster implementation... - eval 'func_append () - { - $debug_cmd - - eval "$1+=\$2" - }' -else - # ...otherwise fall back to using expr, which is often a shell builtin. - func_append () - { - $debug_cmd - - eval "$1=\$$1\$2" - } -fi - - -# func_append_quoted VAR VALUE -# ---------------------------- -# Quote VALUE and append to the end of shell variable VAR, separated -# by a space. -if test yes = "$_G_HAVE_PLUSEQ_OP"; then - eval 'func_append_quoted () - { - $debug_cmd - - func_quote_for_eval "$2" - eval "$1+=\\ \$func_quote_for_eval_result" - }' -else - func_append_quoted () - { - $debug_cmd - - func_quote_for_eval "$2" - eval "$1=\$$1\\ \$func_quote_for_eval_result" - } -fi - - -# func_append_uniq VAR VALUE -# -------------------------- -# Append unique VALUE onto the existing contents of VAR, assuming -# entries are delimited by the first character of VALUE. For example: -# -# func_append_uniq options " --another-option option-argument" -# -# will only append to $options if " --another-option option-argument " -# is not already present somewhere in $options already (note spaces at -# each end implied by leading space in second argument). -func_append_uniq () -{ - $debug_cmd - - eval _G_current_value='`$ECHO $'$1'`' - _G_delim=`expr "$2" : '\(.\)'` - - case $_G_delim$_G_current_value$_G_delim in - *"$2$_G_delim"*) ;; - *) func_append "$@" ;; - esac -} - - -# func_arith TERM... -# ------------------ -# Set func_arith_result to the result of evaluating TERMs. - test -z "$_G_HAVE_ARITH_OP" \ - && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ - && _G_HAVE_ARITH_OP=yes - -if test yes = "$_G_HAVE_ARITH_OP"; then - eval 'func_arith () - { - $debug_cmd - - func_arith_result=$(( $* )) - }' -else - func_arith () - { - $debug_cmd - - func_arith_result=`expr "$@"` - } -fi - - -# func_basename FILE -# ------------------ -# Set func_basename_result to FILE with everything up to and including -# the last / stripped. -if test yes = "$_G_HAVE_XSI_OPS"; then - # If this shell supports suffix pattern removal, then use it to avoid - # forking. Hide the definitions single quotes in case the shell chokes - # on unsupported syntax... - _b='func_basename_result=${1##*/}' - _d='case $1 in - */*) func_dirname_result=${1%/*}$2 ;; - * ) func_dirname_result=$3 ;; - esac' - -else - # ...otherwise fall back to using sed. - _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' - _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` - if test "X$func_dirname_result" = "X$1"; then - func_dirname_result=$3 - else - func_append func_dirname_result "$2" - fi' -fi - -eval 'func_basename () -{ - $debug_cmd - - '"$_b"' -}' - - -# func_dirname FILE APPEND NONDIR_REPLACEMENT -# ------------------------------------------- -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -eval 'func_dirname () -{ - $debug_cmd - - '"$_d"' -}' - - -# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT -# -------------------------------------------------------- -# Perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# For efficiency, we do not delegate to the functions above but instead -# duplicate the functionality here. -eval 'func_dirname_and_basename () -{ - $debug_cmd - - '"$_b"' - '"$_d"' -}' - - -# func_echo ARG... -# ---------------- -# Echo program name prefixed message. -func_echo () -{ - $debug_cmd - - _G_message=$* - - func_echo_IFS=$IFS - IFS=$nl - for _G_line in $_G_message; do - IFS=$func_echo_IFS - $ECHO "$progname: $_G_line" - done - IFS=$func_echo_IFS -} - - -# func_echo_all ARG... -# -------------------- -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - - -# func_echo_infix_1 INFIX ARG... -# ------------------------------ -# Echo program name, followed by INFIX on the first line, with any -# additional lines not showing INFIX. -func_echo_infix_1 () -{ - $debug_cmd - - $require_term_colors - - _G_infix=$1; shift - _G_indent=$_G_infix - _G_prefix="$progname: $_G_infix: " - _G_message=$* - - # Strip color escape sequences before counting printable length - for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" - do - test -n "$_G_tc" && { - _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` - _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` - } - done - _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes - - func_echo_infix_1_IFS=$IFS - IFS=$nl - for _G_line in $_G_message; do - IFS=$func_echo_infix_1_IFS - $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 - _G_prefix=$_G_indent - done - IFS=$func_echo_infix_1_IFS -} - - -# func_error ARG... -# ----------------- -# Echo program name prefixed message to standard error. -func_error () -{ - $debug_cmd - - $require_term_colors - - func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 -} - - -# func_fatal_error ARG... -# ----------------------- -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - $debug_cmd - - func_error "$*" - exit $EXIT_FAILURE -} - - -# func_grep EXPRESSION FILENAME -# ----------------------------- -# Check whether EXPRESSION matches any line of FILENAME, without output. -func_grep () -{ - $debug_cmd - - $GREP "$1" "$2" >/dev/null 2>&1 -} - - -# func_len STRING -# --------------- -# Set func_len_result to the length of STRING. STRING may not -# start with a hyphen. - test -z "$_G_HAVE_XSI_OPS" \ - && (eval 'x=a/b/c; - test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ - && _G_HAVE_XSI_OPS=yes - -if test yes = "$_G_HAVE_XSI_OPS"; then - eval 'func_len () - { - $debug_cmd - - func_len_result=${#1} - }' -else - func_len () - { - $debug_cmd - - func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` - } -fi - - -# func_mkdir_p DIRECTORY-PATH -# --------------------------- -# Make sure the entire path to DIRECTORY-PATH is available. -func_mkdir_p () -{ - $debug_cmd - - _G_directory_path=$1 - _G_dir_list= - - if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then - - # Protect directory names starting with '-' - case $_G_directory_path in - -*) _G_directory_path=./$_G_directory_path ;; - esac - - # While some portion of DIR does not yet exist... - while test ! -d "$_G_directory_path"; do - # ...make a list in topmost first order. Use a colon delimited - # list incase some portion of path contains whitespace. - _G_dir_list=$_G_directory_path:$_G_dir_list - - # If the last portion added has no slash in it, the list is done - case $_G_directory_path in */*) ;; *) break ;; esac - - # ...otherwise throw away the child directory and loop - _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` - done - _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` - - func_mkdir_p_IFS=$IFS; IFS=: - for _G_dir in $_G_dir_list; do - IFS=$func_mkdir_p_IFS - # mkdir can fail with a 'File exist' error if two processes - # try to create one of the directories concurrently. Don't - # stop in that case! - $MKDIR "$_G_dir" 2>/dev/null || : - done - IFS=$func_mkdir_p_IFS - - # Bail out if we (or some other process) failed to create a directory. - test -d "$_G_directory_path" || \ - func_fatal_error "Failed to create '$1'" - fi -} - - -# func_mktempdir [BASENAME] -# ------------------------- -# Make a temporary directory that won't clash with other running -# libtool processes, and avoids race conditions if possible. If -# given, BASENAME is the basename for that directory. -func_mktempdir () -{ - $debug_cmd - - _G_template=${TMPDIR-/tmp}/${1-$progname} - - if test : = "$opt_dry_run"; then - # Return a directory name, but don't create it in dry-run mode - _G_tmpdir=$_G_template-$$ - else - - # If mktemp works, use that first and foremost - _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` - - if test ! -d "$_G_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - _G_tmpdir=$_G_template-${RANDOM-0}$$ - - func_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$_G_tmpdir" - umask $func_mktempdir_umask - fi - - # If we're not in dry-run mode, bomb out on failure - test -d "$_G_tmpdir" || \ - func_fatal_error "cannot create temporary directory '$_G_tmpdir'" - fi - - $ECHO "$_G_tmpdir" -} - - -# func_normal_abspath PATH -# ------------------------ -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -func_normal_abspath () -{ - $debug_cmd - - # These SED scripts presuppose an absolute path with a trailing slash. - _G_pathcar='s|^/\([^/]*\).*$|\1|' - _G_pathcdr='s|^/[^/]*||' - _G_removedotparts=':dotsl - s|/\./|/|g - t dotsl - s|/\.$|/|' - _G_collapseslashes='s|/\{1,\}|/|g' - _G_finalslash='s|/*$|/|' - - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` - while :; do - # Processed it all yet? - if test / = "$func_normal_abspath_tpath"; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result"; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$_G_pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$_G_pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result -} - - -# func_notquiet ARG... -# -------------------- -# Echo program name prefixed message only when not in quiet mode. -func_notquiet () -{ - $debug_cmd - - $opt_quiet || func_echo ${1+"$@"} - - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : -} - - -# func_relative_path SRCDIR DSTDIR -# -------------------------------- -# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. -func_relative_path () -{ - $debug_cmd - - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=$func_dirname_result - if test -z "$func_relative_path_tlibdir"; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done - - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test -n "$func_stripname_result"; then - func_append func_relative_path_result "/$func_stripname_result" - fi - - # Normalisation. If bindir is libdir, return '.' else relative path. - if test -n "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - fi - - test -n "$func_relative_path_result" || func_relative_path_result=. - - : -} - - -# func_quote_for_eval ARG... -# -------------------------- -# Aesthetically quote ARGs to be evaled later. -# This function returns two values: -# i) func_quote_for_eval_result -# double-quoted, suitable for a subsequent eval -# ii) func_quote_for_eval_unquoted_result -# has all characters that are still active within double -# quotes backslashified. -func_quote_for_eval () -{ - $debug_cmd - - func_quote_for_eval_unquoted_result= - func_quote_for_eval_result= - while test 0 -lt $#; do - case $1 in - *[\\\`\"\$]*) - _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; - *) - _G_unquoted_arg=$1 ;; - esac - if test -n "$func_quote_for_eval_unquoted_result"; then - func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" - else - func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" - fi - - case $_G_unquoted_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and variable expansion - # for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - _G_quoted_arg=\"$_G_unquoted_arg\" - ;; - *) - _G_quoted_arg=$_G_unquoted_arg - ;; - esac - - if test -n "$func_quote_for_eval_result"; then - func_append func_quote_for_eval_result " $_G_quoted_arg" - else - func_append func_quote_for_eval_result "$_G_quoted_arg" - fi - shift - done -} - - -# func_quote_for_expand ARG -# ------------------------- -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () -{ - $debug_cmd - - case $1 in - *[\\\`\"]*) - _G_arg=`$ECHO "$1" | $SED \ - -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; - *) - _G_arg=$1 ;; - esac - - case $_G_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - _G_arg=\"$_G_arg\" - ;; - esac - - func_quote_for_expand_result=$_G_arg -} - - -# func_stripname PREFIX SUFFIX NAME -# --------------------------------- -# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -if test yes = "$_G_HAVE_XSI_OPS"; then - eval 'func_stripname () - { - $debug_cmd - - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary variable first. - func_stripname_result=$3 - func_stripname_result=${func_stripname_result#"$1"} - func_stripname_result=${func_stripname_result%"$2"} - }' -else - func_stripname () - { - $debug_cmd - - case $2 in - .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; - *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; - esac - } -fi - - -# func_show_eval CMD [FAIL_EXP] -# ----------------------------- -# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - $debug_cmd - - _G_cmd=$1 - _G_fail_exp=${2-':'} - - func_quote_for_expand "$_G_cmd" - eval "func_notquiet $func_quote_for_expand_result" - - $opt_dry_run || { - eval "$_G_cmd" - _G_status=$? - if test 0 -ne "$_G_status"; then - eval "(exit $_G_status); $_G_fail_exp" - fi - } -} - - -# func_show_eval_locale CMD [FAIL_EXP] -# ------------------------------------ -# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () -{ - $debug_cmd - - _G_cmd=$1 - _G_fail_exp=${2-':'} - - $opt_quiet || { - func_quote_for_expand "$_G_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - $opt_dry_run || { - eval "$_G_user_locale - $_G_cmd" - _G_status=$? - eval "$_G_safe_locale" - if test 0 -ne "$_G_status"; then - eval "(exit $_G_status); $_G_fail_exp" - fi - } -} - - -# func_tr_sh -# ---------- -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - $debug_cmd - - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac -} - - -# func_verbose ARG... -# ------------------- -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $debug_cmd - - $opt_verbose && func_echo "$*" - - : -} - - -# func_warn_and_continue ARG... -# ----------------------------- -# Echo program name prefixed warning message to standard error. -func_warn_and_continue () -{ - $debug_cmd - - $require_term_colors - - func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 -} - - -# func_warning CATEGORY ARG... -# ---------------------------- -# Echo program name prefixed warning message to standard error. Warning -# messages can be filtered according to CATEGORY, where this function -# elides messages where CATEGORY is not listed in the global variable -# 'opt_warning_types'. -func_warning () -{ - $debug_cmd - - # CATEGORY must be in the warning_categories list! - case " $warning_categories " in - *" $1 "*) ;; - *) func_internal_error "invalid warning category '$1'" ;; - esac - - _G_category=$1 - shift - - case " $opt_warning_types " in - *" $_G_category "*) $warning_func ${1+"$@"} ;; - esac -} - - -# func_sort_ver VER1 VER2 -# ----------------------- -# 'sort -V' is not generally available. -# Note this deviates from the version comparison in automake -# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a -# but this should suffice as we won't be specifying old -# version formats or redundant trailing .0 in bootstrap.conf. -# If we did want full compatibility then we should probably -# use m4_version_compare from autoconf. -func_sort_ver () -{ - $debug_cmd - - printf '%s\n%s\n' "$1" "$2" \ - | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n -} - -# func_lt_ver PREV CURR -# --------------------- -# Return true if PREV and CURR are in the correct order according to -# func_sort_ver, otherwise false. Use it like this: -# -# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." -func_lt_ver () -{ - $debug_cmd - - test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` -} - - -# Local variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" -# time-stamp-time-zone: "UTC" -# End: -#! /bin/sh - -# Set a version string for this script. -scriptversion=2014-01-07.03; # UTC - -# A portable, pluggable option parser for Bourne shell. -# Written by Gary V. Vaughan, 2010 - -# Copyright (C) 2010-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# Please report bugs or propose patches to gary@gnu.org. - - -## ------ ## -## Usage. ## -## ------ ## - -# This file is a library for parsing options in your shell scripts along -# with assorted other useful supporting features that you can make use -# of too. -# -# For the simplest scripts you might need only: -# -# #!/bin/sh -# . relative/path/to/funclib.sh -# . relative/path/to/options-parser -# scriptversion=1.0 -# func_options ${1+"$@"} -# eval set dummy "$func_options_result"; shift -# ...rest of your script... -# -# In order for the '--version' option to work, you will need to have a -# suitably formatted comment like the one at the top of this file -# starting with '# Written by ' and ending with '# warranty; '. -# -# For '-h' and '--help' to work, you will also need a one line -# description of your script's purpose in a comment directly above the -# '# Written by ' line, like the one at the top of this file. -# -# The default options also support '--debug', which will turn on shell -# execution tracing (see the comment above debug_cmd below for another -# use), and '--verbose' and the func_verbose function to allow your script -# to display verbose messages only when your user has specified -# '--verbose'. -# -# After sourcing this file, you can plug processing for additional -# options by amending the variables from the 'Configuration' section -# below, and following the instructions in the 'Option parsing' -# section further down. - -## -------------- ## -## Configuration. ## -## -------------- ## - -# You should override these variables in your script after sourcing this -# file so that they reflect the customisations you have added to the -# option parser. - -# The usage line for option parsing errors and the start of '-h' and -# '--help' output messages. You can embed shell variables for delayed -# expansion at the time the message is displayed, but you will need to -# quote other shell meta-characters carefully to prevent them being -# expanded when the contents are evaled. -usage='$progpath [OPTION]...' - -# Short help message in response to '-h' and '--help'. Add to this or -# override it after sourcing this library to reflect the full set of -# options your script accepts. -usage_message="\ - --debug enable verbose shell tracing - -W, --warnings=CATEGORY - report the warnings falling in CATEGORY [all] - -v, --verbose verbosely report processing - --version print version information and exit - -h, --help print short or long help message and exit -" - -# Additional text appended to 'usage_message' in response to '--help'. -long_help_message=" -Warning categories include: - 'all' show all warnings - 'none' turn off all the warnings - 'error' warnings are treated as fatal errors" - -# Help message printed before fatal option parsing errors. -fatal_help="Try '\$progname --help' for more information." - - - -## ------------------------- ## -## Hook function management. ## -## ------------------------- ## - -# This section contains functions for adding, removing, and running hooks -# to the main code. A hook is just a named list of of function, that can -# be run in order later on. - -# func_hookable FUNC_NAME -# ----------------------- -# Declare that FUNC_NAME will run hooks added with -# 'func_add_hook FUNC_NAME ...'. -func_hookable () -{ - $debug_cmd - - func_append hookable_fns " $1" -} - - -# func_add_hook FUNC_NAME HOOK_FUNC -# --------------------------------- -# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must -# first have been declared "hookable" by a call to 'func_hookable'. -func_add_hook () -{ - $debug_cmd - - case " $hookable_fns " in - *" $1 "*) ;; - *) func_fatal_error "'$1' does not accept hook functions." ;; - esac - - eval func_append ${1}_hooks '" $2"' -} - - -# func_remove_hook FUNC_NAME HOOK_FUNC -# ------------------------------------ -# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. -func_remove_hook () -{ - $debug_cmd - - eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' -} - - -# func_run_hooks FUNC_NAME [ARG]... -# --------------------------------- -# Run all hook functions registered to FUNC_NAME. -# It is assumed that the list of hook functions contains nothing more -# than a whitespace-delimited list of legal shell function names, and -# no effort is wasted trying to catch shell meta-characters or preserve -# whitespace. -func_run_hooks () -{ - $debug_cmd - - case " $hookable_fns " in - *" $1 "*) ;; - *) func_fatal_error "'$1' does not support hook funcions.n" ;; - esac - - eval _G_hook_fns=\$$1_hooks; shift - - for _G_hook in $_G_hook_fns; do - eval $_G_hook '"$@"' - - # store returned options list back into positional - # parameters for next 'cmd' execution. - eval _G_hook_result=\$${_G_hook}_result - eval set dummy "$_G_hook_result"; shift - done - - func_quote_for_eval ${1+"$@"} - func_run_hooks_result=$func_quote_for_eval_result -} - - - -## --------------- ## -## Option parsing. ## -## --------------- ## - -# In order to add your own option parsing hooks, you must accept the -# full positional parameter list in your hook function, remove any -# options that you action, and then pass back the remaining unprocessed -# options in '_result', escaped suitably for -# 'eval'. Like this: -# -# my_options_prep () -# { -# $debug_cmd -# -# # Extend the existing usage message. -# usage_message=$usage_message' -# -s, --silent don'\''t print informational messages -# ' -# -# func_quote_for_eval ${1+"$@"} -# my_options_prep_result=$func_quote_for_eval_result -# } -# func_add_hook func_options_prep my_options_prep -# -# -# my_silent_option () -# { -# $debug_cmd -# -# # Note that for efficiency, we parse as many options as we can -# # recognise in a loop before passing the remainder back to the -# # caller on the first unrecognised argument we encounter. -# while test $# -gt 0; do -# opt=$1; shift -# case $opt in -# --silent|-s) opt_silent=: ;; -# # Separate non-argument short options: -# -s*) func_split_short_opt "$_G_opt" -# set dummy "$func_split_short_opt_name" \ -# "-$func_split_short_opt_arg" ${1+"$@"} -# shift -# ;; -# *) set dummy "$_G_opt" "$*"; shift; break ;; -# esac -# done -# -# func_quote_for_eval ${1+"$@"} -# my_silent_option_result=$func_quote_for_eval_result -# } -# func_add_hook func_parse_options my_silent_option -# -# -# my_option_validation () -# { -# $debug_cmd -# -# $opt_silent && $opt_verbose && func_fatal_help "\ -# '--silent' and '--verbose' options are mutually exclusive." -# -# func_quote_for_eval ${1+"$@"} -# my_option_validation_result=$func_quote_for_eval_result -# } -# func_add_hook func_validate_options my_option_validation -# -# You'll alse need to manually amend $usage_message to reflect the extra -# options you parse. It's preferable to append if you can, so that -# multiple option parsing hooks can be added safely. - - -# func_options [ARG]... -# --------------------- -# All the functions called inside func_options are hookable. See the -# individual implementations for details. -func_hookable func_options -func_options () -{ - $debug_cmd - - func_options_prep ${1+"$@"} - eval func_parse_options \ - ${func_options_prep_result+"$func_options_prep_result"} - eval func_validate_options \ - ${func_parse_options_result+"$func_parse_options_result"} - - eval func_run_hooks func_options \ - ${func_validate_options_result+"$func_validate_options_result"} - - # save modified positional parameters for caller - func_options_result=$func_run_hooks_result -} - - -# func_options_prep [ARG]... -# -------------------------- -# All initialisations required before starting the option parse loop. -# Note that when calling hook functions, we pass through the list of -# positional parameters. If a hook function modifies that list, and -# needs to propogate that back to rest of this script, then the complete -# modified list must be put in 'func_run_hooks_result' before -# returning. -func_hookable func_options_prep -func_options_prep () -{ - $debug_cmd - - # Option defaults: - opt_verbose=false - opt_warning_types= - - func_run_hooks func_options_prep ${1+"$@"} - - # save modified positional parameters for caller - func_options_prep_result=$func_run_hooks_result -} - - -# func_parse_options [ARG]... -# --------------------------- -# The main option parsing loop. -func_hookable func_parse_options -func_parse_options () -{ - $debug_cmd - - func_parse_options_result= - - # this just eases exit handling - while test $# -gt 0; do - # Defer to hook functions for initial option parsing, so they - # get priority in the event of reusing an option name. - func_run_hooks func_parse_options ${1+"$@"} - - # Adjust func_parse_options positional parameters to match - eval set dummy "$func_run_hooks_result"; shift - - # Break out of the loop if we already parsed every option. - test $# -gt 0 || break - - _G_opt=$1 - shift - case $_G_opt in - --debug|-x) debug_cmd='set -x' - func_echo "enabling shell trace mode" - $debug_cmd - ;; - - --no-warnings|--no-warning|--no-warn) - set dummy --warnings none ${1+"$@"} - shift - ;; - - --warnings|--warning|-W) - test $# = 0 && func_missing_arg $_G_opt && break - case " $warning_categories $1" in - *" $1 "*) - # trailing space prevents matching last $1 above - func_append_uniq opt_warning_types " $1" - ;; - *all) - opt_warning_types=$warning_categories - ;; - *none) - opt_warning_types=none - warning_func=: - ;; - *error) - opt_warning_types=$warning_categories - warning_func=func_fatal_error - ;; - *) - func_fatal_error \ - "unsupported warning category: '$1'" - ;; - esac - shift - ;; - - --verbose|-v) opt_verbose=: ;; - --version) func_version ;; - -\?|-h) func_usage ;; - --help) func_help ;; - - # Separate optargs to long options (plugins may need this): - --*=*) func_split_equals "$_G_opt" - set dummy "$func_split_equals_lhs" \ - "$func_split_equals_rhs" ${1+"$@"} - shift - ;; - - # Separate optargs to short options: - -W*) - func_split_short_opt "$_G_opt" - set dummy "$func_split_short_opt_name" \ - "$func_split_short_opt_arg" ${1+"$@"} - shift - ;; - - # Separate non-argument short options: - -\?*|-h*|-v*|-x*) - func_split_short_opt "$_G_opt" - set dummy "$func_split_short_opt_name" \ - "-$func_split_short_opt_arg" ${1+"$@"} - shift - ;; - - --) break ;; - -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; - *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; - esac - done - - # save modified positional parameters for caller - func_quote_for_eval ${1+"$@"} - func_parse_options_result=$func_quote_for_eval_result -} - - -# func_validate_options [ARG]... -# ------------------------------ -# Perform any sanity checks on option settings and/or unconsumed -# arguments. -func_hookable func_validate_options -func_validate_options () -{ - $debug_cmd - - # Display all warnings if -W was not given. - test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" - - func_run_hooks func_validate_options ${1+"$@"} - - # Bail if the options were screwed! - $exit_cmd $EXIT_FAILURE - - # save modified positional parameters for caller - func_validate_options_result=$func_run_hooks_result -} - - - -## ----------------- ## -## Helper functions. ## -## ----------------- ## - -# This section contains the helper functions used by the rest of the -# hookable option parser framework in ascii-betical order. - - -# func_fatal_help ARG... -# ---------------------- -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - $debug_cmd - - eval \$ECHO \""Usage: $usage"\" - eval \$ECHO \""$fatal_help"\" - func_error ${1+"$@"} - exit $EXIT_FAILURE -} - - -# func_help -# --------- -# Echo long help message to standard output and exit. -func_help () -{ - $debug_cmd - - func_usage_message - $ECHO "$long_help_message" - exit 0 -} - - -# func_missing_arg ARGNAME -# ------------------------ -# Echo program name prefixed message to standard error and set global -# exit_cmd. -func_missing_arg () -{ - $debug_cmd - - func_error "Missing argument for '$1'." - exit_cmd=exit -} - - -# func_split_equals STRING -# ------------------------ -# Set func_split_equals_lhs and func_split_equals_rhs shell variables after -# splitting STRING at the '=' sign. -test -z "$_G_HAVE_XSI_OPS" \ - && (eval 'x=a/b/c; - test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ - && _G_HAVE_XSI_OPS=yes - -if test yes = "$_G_HAVE_XSI_OPS" -then - # This is an XSI compatible shell, allowing a faster implementation... - eval 'func_split_equals () - { - $debug_cmd - - func_split_equals_lhs=${1%%=*} - func_split_equals_rhs=${1#*=} - test "x$func_split_equals_lhs" = "x$1" \ - && func_split_equals_rhs= - }' -else - # ...otherwise fall back to using expr, which is often a shell builtin. - func_split_equals () - { - $debug_cmd - - func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` - func_split_equals_rhs= - test "x$func_split_equals_lhs" = "x$1" \ - || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` - } -fi #func_split_equals - - -# func_split_short_opt SHORTOPT -# ----------------------------- -# Set func_split_short_opt_name and func_split_short_opt_arg shell -# variables after splitting SHORTOPT after the 2nd character. -if test yes = "$_G_HAVE_XSI_OPS" -then - # This is an XSI compatible shell, allowing a faster implementation... - eval 'func_split_short_opt () - { - $debug_cmd - - func_split_short_opt_arg=${1#??} - func_split_short_opt_name=${1%"$func_split_short_opt_arg"} - }' -else - # ...otherwise fall back to using expr, which is often a shell builtin. - func_split_short_opt () - { - $debug_cmd - - func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` - func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` - } -fi #func_split_short_opt - - -# func_usage -# ---------- -# Echo short help message to standard output and exit. -func_usage () -{ - $debug_cmd - - func_usage_message - $ECHO "Run '$progname --help |${PAGER-more}' for full usage" - exit 0 -} - - -# func_usage_message -# ------------------ -# Echo short help message to standard output. -func_usage_message () -{ - $debug_cmd - - eval \$ECHO \""Usage: $usage"\" - echo - $SED -n 's|^# || - /^Written by/{ - x;p;x - } - h - /^Written by/q' < "$progpath" - echo - eval \$ECHO \""$usage_message"\" -} - - -# func_version -# ------------ -# Echo version message to standard output and exit. -func_version () -{ - $debug_cmd - - printf '%s\n' "$progname $scriptversion" - $SED -n ' - /(C)/!b go - :more - /\./!{ - N - s|\n# | | - b more - } - :go - /^# Written by /,/# warranty; / { - s|^# || - s|^# *$|| - s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| - p - } - /^# Written by / { - s|^# || - p - } - /^warranty; /q' < "$progpath" - - exit $? -} - - -# Local variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" -# time-stamp-time-zone: "UTC" -# End: - -# Set a version string. -scriptversion='(GNU libtool) 2.4.6' - - -# func_echo ARG... -# ---------------- -# Libtool also displays the current mode in messages, so override -# funclib.sh func_echo with this custom definition. -func_echo () -{ - $debug_cmd - - _G_message=$* - - func_echo_IFS=$IFS - IFS=$nl - for _G_line in $_G_message; do - IFS=$func_echo_IFS - $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" - done - IFS=$func_echo_IFS -} - - -# func_warning ARG... -# ------------------- -# Libtool warnings are not categorized, so override funclib.sh -# func_warning with this simpler definition. -func_warning () -{ - $debug_cmd - - $warning_func ${1+"$@"} -} - - -## ---------------- ## -## Options parsing. ## -## ---------------- ## - -# Hook in the functions to make sure our own options are parsed during -# the option parsing loop. - -usage='$progpath [OPTION]... [MODE-ARG]...' - -# Short help message in response to '-h'. -usage_message="Options: - --config show all configuration variables - --debug enable verbose shell tracing - -n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --mode=MODE use operation mode MODE - --no-warnings equivalent to '-Wnone' - --preserve-dup-deps don't remove duplicate dependency libraries - --quiet, --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - -v, --verbose print more informational messages than default - --version print version information - -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] - -h, --help, --help-all print short, long, or detailed help message -" - -# Additional text appended to 'usage_message' in response to '--help'. -func_help () -{ - $debug_cmd - - func_usage_message - $ECHO "$long_help_message - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. When passed as first option, -'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. -Try '$progname --help --mode=MODE' for a more detailed description of MODE. - -When reporting a bug, please describe a test case to reproduce it and -include the following information: - - host-triplet: $host - shell: $SHELL - compiler: $LTCC - compiler flags: $LTCFLAGS - linker: $LD (gnu? $with_gnu_ld) - version: $progname (GNU libtool) 2.4.6 - automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` - autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` - -Report bugs to . -GNU libtool home page: . -General help using GNU software: ." - exit 0 -} - - -# func_lo2o OBJECT-NAME -# --------------------- -# Transform OBJECT-NAME from a '.lo' suffix to the platform specific -# object suffix. - -lo2o=s/\\.lo\$/.$objext/ -o2lo=s/\\.$objext\$/.lo/ - -if test yes = "$_G_HAVE_XSI_OPS"; then - eval 'func_lo2o () - { - case $1 in - *.lo) func_lo2o_result=${1%.lo}.$objext ;; - * ) func_lo2o_result=$1 ;; - esac - }' - - # func_xform LIBOBJ-OR-SOURCE - # --------------------------- - # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) - # suffix to a '.lo' libtool-object suffix. - eval 'func_xform () - { - func_xform_result=${1%.*}.lo - }' -else - # ...otherwise fall back to using sed. - func_lo2o () - { - func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` - } - - func_xform () - { - func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` - } -fi - - -# func_fatal_configuration ARG... -# ------------------------------- -# Echo program name prefixed message to standard error, followed by -# a configuration failure hint, and exit. -func_fatal_configuration () -{ - func__fatal_error ${1+"$@"} \ - "See the $PACKAGE documentation for more information." \ - "Fatal configuration error." -} - - -# func_config -# ----------- -# Display the configuration for all the tags in this script. -func_config () -{ - re_begincf='^# ### BEGIN LIBTOOL' - re_endcf='^# ### END LIBTOOL' - - # Default configuration. - $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" - - # Now print the configurations for the tags. - for tagname in $taglist; do - $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" - done - - exit $? -} - - -# func_features -# ------------- -# Display the features supported by this script. -func_features () -{ - echo "host: $host" - if test yes = "$build_libtool_libs"; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test yes = "$build_old_libs"; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - - exit $? -} - - -# func_enable_tag TAGNAME -# ----------------------- -# Verify that TAGNAME is valid, and either flag an error and exit, or -# enable the TAGNAME tag. We also add TAGNAME to the global $taglist -# variable here. -func_enable_tag () -{ - # Global variable: - tagname=$1 - - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf=/$re_begincf/,/$re_endcf/p - - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac - - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; - *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" - - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac -} - - -# func_check_version_match -# ------------------------ -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () -{ - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -# libtool_options_prep [ARG]... -# ----------------------------- -# Preparation for options parsed by libtool. -libtool_options_prep () -{ - $debug_mode - - # Option defaults: - opt_config=false - opt_dlopen= - opt_dry_run=false - opt_help=false - opt_mode= - opt_preserve_dup_deps=false - opt_quiet=false - - nonopt= - preserve_args= - - # Shorthand for --mode=foo, only valid as the first argument - case $1 in - clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; - compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; - execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; - finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; - install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; - link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; - uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; - esac - - # Pass back the list of options. - func_quote_for_eval ${1+"$@"} - libtool_options_prep_result=$func_quote_for_eval_result -} -func_add_hook func_options_prep libtool_options_prep - - -# libtool_parse_options [ARG]... -# --------------------------------- -# Provide handling for libtool specific options. -libtool_parse_options () -{ - $debug_cmd - - # Perform our own loop to consume as many options as possible in - # each iteration. - while test $# -gt 0; do - _G_opt=$1 - shift - case $_G_opt in - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - - --config) func_config ;; - - --dlopen|-dlopen) - opt_dlopen="${opt_dlopen+$opt_dlopen -}$1" - shift - ;; - - --preserve-dup-deps) - opt_preserve_dup_deps=: ;; - - --features) func_features ;; - - --finish) set dummy --mode finish ${1+"$@"}; shift ;; - - --help) opt_help=: ;; - - --help-all) opt_help=': help-all' ;; - - --mode) test $# = 0 && func_missing_arg $_G_opt && break - opt_mode=$1 - case $1 in - # Valid mode arguments: - clean|compile|execute|finish|install|link|relink|uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $_G_opt" - exit_cmd=exit - break - ;; - esac - shift - ;; - - --no-silent|--no-quiet) - opt_quiet=false - func_append preserve_args " $_G_opt" - ;; - - --no-warnings|--no-warning|--no-warn) - opt_warning=false - func_append preserve_args " $_G_opt" - ;; - - --no-verbose) - opt_verbose=false - func_append preserve_args " $_G_opt" - ;; - - --silent|--quiet) - opt_quiet=: - opt_verbose=false - func_append preserve_args " $_G_opt" - ;; - - --tag) test $# = 0 && func_missing_arg $_G_opt && break - opt_tag=$1 - func_append preserve_args " $_G_opt $1" - func_enable_tag "$1" - shift - ;; - - --verbose|-v) opt_quiet=false - opt_verbose=: - func_append preserve_args " $_G_opt" - ;; - - # An option not handled by this hook function: - *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; - esac - done - - - # save modified positional parameters for caller - func_quote_for_eval ${1+"$@"} - libtool_parse_options_result=$func_quote_for_eval_result -} -func_add_hook func_parse_options libtool_parse_options - - - -# libtool_validate_options [ARG]... -# --------------------------------- -# Perform any sanity checks on option settings and/or unconsumed -# arguments. -libtool_validate_options () -{ - # save first non-option argument - if test 0 -lt $#; then - nonopt=$1 - shift - fi - - # preserve --debug - test : = "$debug_cmd" || func_append preserve_args " --debug" - - case $host in - # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 - # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 - *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: - ;; - *) - opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps - ;; - esac - - $opt_help || { - # Sanity checks first: - func_check_version_match - - test yes != "$build_libtool_libs" \ - && test yes != "$build_old_libs" \ - && func_fatal_configuration "not configured to build any kind of library" - - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$opt_dlopen" && test execute != "$opt_mode"; then - func_error "unrecognized option '-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Change the help message to a mode-specific one. - generic_help=$help - help="Try '$progname --help --mode=$opt_mode' for more information." - } - - # Pass back the unparsed argument list - func_quote_for_eval ${1+"$@"} - libtool_validate_options_result=$func_quote_for_eval_result -} -func_add_hook func_validate_options libtool_validate_options - - -# Process options as early as possible so that --help and --version -# can return quickly. -func_options ${1+"$@"} -eval set dummy "$func_options_result"; shift - - - -## ----------- ## -## Main. ## -## ----------- ## - -magic='%%%MAGIC variable%%%' -magic_exe='%%%MAGIC EXE variable%%%' - -# Global variables. -extracted_archives= -extracted_serial=0 - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} - -# func_generated_by_libtool -# True iff stdin has been generated by Libtool. This function is only -# a basic sanity check; it will hardly flush out determined imposters. -func_generated_by_libtool_p () -{ - $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 -} - -# func_lalib_p file -# True iff FILE is a libtool '.la' library or '.lo' object file. -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_lalib_p () -{ - test -f "$1" && - $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p -} - -# func_lalib_unsafe_p file -# True iff FILE is a libtool '.la' library or '.lo' object file. -# This function implements the same check as func_lalib_p without -# resorting to external programs. To this end, it redirects stdin and -# closes it afterwards, without saving the original file descriptor. -# As a safety measure, use it only where a negative result would be -# fatal anyway. Works if 'file' does not exist. -func_lalib_unsafe_p () -{ - lalib_p=no - if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then - for lalib_p_l in 1 2 3 4 - do - read lalib_p_line - case $lalib_p_line in - \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; - esac - done - exec 0<&5 5<&- - fi - test yes = "$lalib_p" -} - -# func_ltwrapper_script_p file -# True iff FILE is a libtool wrapper script -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_script_p () -{ - test -f "$1" && - $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p -} - -# func_ltwrapper_executable_p file -# True iff FILE is a libtool wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_executable_p () -{ - func_ltwrapper_exec_suffix= - case $1 in - *.exe) ;; - *) func_ltwrapper_exec_suffix=.exe ;; - esac - $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 -} - -# func_ltwrapper_scriptname file -# Assumes file is an ltwrapper_executable -# uses $file to determine the appropriate filename for a -# temporary ltwrapper_script. -func_ltwrapper_scriptname () -{ - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper -} - -# func_ltwrapper_p file -# True iff FILE is a libtool wrapper script or wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_p () -{ - func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" -} - - -# func_execute_cmds commands fail_cmd -# Execute tilde-delimited COMMANDS. -# If FAIL_CMD is given, eval that upon failure. -# FAIL_CMD may read-access the current command in variable CMD! -func_execute_cmds () -{ - $debug_cmd - - save_ifs=$IFS; IFS='~' - for cmd in $1; do - IFS=$sp$nl - eval cmd=\"$cmd\" - IFS=$save_ifs - func_show_eval "$cmd" "${2-:}" - done - IFS=$save_ifs -} - - -# func_source file -# Source FILE, adding directory component if necessary. -# Note that it is not necessary on cygwin/mingw to append a dot to -# FILE even if both FILE and FILE.exe exist: automatic-append-.exe -# behavior happens only for exec(3), not for open(2)! Also, sourcing -# 'FILE.' does not work on cygwin managed mounts. -func_source () -{ - $debug_cmd - - case $1 in - */* | *\\*) . "$1" ;; - *) . "./$1" ;; - esac -} - - -# func_resolve_sysroot PATH -# Replace a leading = in PATH with a sysroot. Store the result into -# func_resolve_sysroot_result -func_resolve_sysroot () -{ - func_resolve_sysroot_result=$1 - case $func_resolve_sysroot_result in - =*) - func_stripname '=' '' "$func_resolve_sysroot_result" - func_resolve_sysroot_result=$lt_sysroot$func_stripname_result - ;; - esac -} - -# func_replace_sysroot PATH -# If PATH begins with the sysroot, replace it with = and -# store the result into func_replace_sysroot_result. -func_replace_sysroot () -{ - case $lt_sysroot:$1 in - ?*:"$lt_sysroot"*) - func_stripname "$lt_sysroot" '' "$1" - func_replace_sysroot_result='='$func_stripname_result - ;; - *) - # Including no sysroot. - func_replace_sysroot_result=$1 - ;; - esac -} - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () -{ - $debug_cmd - - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - func_append_quoted CC_quoted "$arg" - done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - func_append_quoted CC_quoted "$arg" - done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` - case "$@ " in - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with '--tag'" -# else -# func_verbose "using $tagname tagged configuration" - fi - ;; - esac - fi -} - - - -# func_write_libtool_object output_name pic_name nonpic_name -# Create a libtool object file (analogous to a ".la" file), -# but don't create it if we're doing a dry run. -func_write_libtool_object () -{ - write_libobj=$1 - if test yes = "$build_libtool_libs"; then - write_lobj=\'$2\' - else - write_lobj=none - fi - - if test yes = "$build_old_libs"; then - write_oldobj=\'$3\' - else - write_oldobj=none - fi - - $opt_dry_run || { - cat >${write_libobj}T </dev/null` - if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then - func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | - $SED -e "$sed_naive_backslashify"` - else - func_convert_core_file_wine_to_w32_result= - fi - fi -} -# end: func_convert_core_file_wine_to_w32 - - -# func_convert_core_path_wine_to_w32 ARG -# Helper function used by path conversion functions when $build is *nix, and -# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly -# configured wine environment available, with the winepath program in $build's -# $PATH. Assumes ARG has no leading or trailing path separator characters. -# -# ARG is path to be converted from $build format to win32. -# Result is available in $func_convert_core_path_wine_to_w32_result. -# Unconvertible file (directory) names in ARG are skipped; if no directory names -# are convertible, then the result may be empty. -func_convert_core_path_wine_to_w32 () -{ - $debug_cmd - - # unfortunately, winepath doesn't convert paths, only file names - func_convert_core_path_wine_to_w32_result= - if test -n "$1"; then - oldIFS=$IFS - IFS=: - for func_convert_core_path_wine_to_w32_f in $1; do - IFS=$oldIFS - func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" - if test -n "$func_convert_core_file_wine_to_w32_result"; then - if test -z "$func_convert_core_path_wine_to_w32_result"; then - func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result - else - func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" - fi - fi - done - IFS=$oldIFS - fi -} -# end: func_convert_core_path_wine_to_w32 - - -# func_cygpath ARGS... -# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when -# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) -# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or -# (2), returns the Cygwin file name or path in func_cygpath_result (input -# file name or path is assumed to be in w32 format, as previously converted -# from $build's *nix or MSYS format). In case (3), returns the w32 file name -# or path in func_cygpath_result (input file name or path is assumed to be in -# Cygwin format). Returns an empty string on error. -# -# ARGS are passed to cygpath, with the last one being the file name or path to -# be converted. -# -# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH -# environment variable; do not put it in $PATH. -func_cygpath () -{ - $debug_cmd - - if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then - func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` - if test "$?" -ne 0; then - # on failure, ensure result is empty - func_cygpath_result= - fi - else - func_cygpath_result= - func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" - fi -} -#end: func_cygpath - - -# func_convert_core_msys_to_w32 ARG -# Convert file name or path ARG from MSYS format to w32 format. Return -# result in func_convert_core_msys_to_w32_result. -func_convert_core_msys_to_w32 () -{ - $debug_cmd - - # awkward: cmd appends spaces to result - func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | - $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` -} -#end: func_convert_core_msys_to_w32 - - -# func_convert_file_check ARG1 ARG2 -# Verify that ARG1 (a file name in $build format) was converted to $host -# format in ARG2. Otherwise, emit an error message, but continue (resetting -# func_to_host_file_result to ARG1). -func_convert_file_check () -{ - $debug_cmd - - if test -z "$2" && test -n "$1"; then - func_error "Could not determine host file name corresponding to" - func_error " '$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback: - func_to_host_file_result=$1 - fi -} -# end func_convert_file_check - - -# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH -# Verify that FROM_PATH (a path in $build format) was converted to $host -# format in TO_PATH. Otherwise, emit an error message, but continue, resetting -# func_to_host_file_result to a simplistic fallback value (see below). -func_convert_path_check () -{ - $debug_cmd - - if test -z "$4" && test -n "$3"; then - func_error "Could not determine the host path corresponding to" - func_error " '$3'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback. This is a deliberately simplistic "conversion" and - # should not be "improved". See libtool.info. - if test "x$1" != "x$2"; then - lt_replace_pathsep_chars="s|$1|$2|g" - func_to_host_path_result=`echo "$3" | - $SED -e "$lt_replace_pathsep_chars"` - else - func_to_host_path_result=$3 - fi - fi -} -# end func_convert_path_check - - -# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG -# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT -# and appending REPL if ORIG matches BACKPAT. -func_convert_path_front_back_pathsep () -{ - $debug_cmd - - case $4 in - $1 ) func_to_host_path_result=$3$func_to_host_path_result - ;; - esac - case $4 in - $2 ) func_append func_to_host_path_result "$3" - ;; - esac -} -# end func_convert_path_front_back_pathsep - - -################################################## -# $build to $host FILE NAME CONVERSION FUNCTIONS # -################################################## -# invoked via '$to_host_file_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# Result will be available in $func_to_host_file_result. - - -# func_to_host_file ARG -# Converts the file name ARG from $build format to $host format. Return result -# in func_to_host_file_result. -func_to_host_file () -{ - $debug_cmd - - $to_host_file_cmd "$1" -} -# end func_to_host_file - - -# func_to_tool_file ARG LAZY -# converts the file name ARG from $build format to toolchain format. Return -# result in func_to_tool_file_result. If the conversion in use is listed -# in (the comma separated) LAZY, no conversion takes place. -func_to_tool_file () -{ - $debug_cmd - - case ,$2, in - *,"$to_tool_file_cmd",*) - func_to_tool_file_result=$1 - ;; - *) - $to_tool_file_cmd "$1" - func_to_tool_file_result=$func_to_host_file_result - ;; - esac -} -# end func_to_tool_file - - -# func_convert_file_noop ARG -# Copy ARG to func_to_host_file_result. -func_convert_file_noop () -{ - func_to_host_file_result=$1 -} -# end func_convert_file_noop - - -# func_convert_file_msys_to_w32 ARG -# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_file_result. -func_convert_file_msys_to_w32 () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_to_host_file_result=$func_convert_core_msys_to_w32_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_w32 - - -# func_convert_file_cygwin_to_w32 ARG -# Convert file name ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_file_cygwin_to_w32 () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - # because $build is cygwin, we call "the" cygpath in $PATH; no need to use - # LT_CYGPATH in this case. - func_to_host_file_result=`cygpath -m "$1"` - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_cygwin_to_w32 - - -# func_convert_file_nix_to_w32 ARG -# Convert file name ARG from *nix to w32 format. Requires a wine environment -# and a working winepath. Returns result in func_to_host_file_result. -func_convert_file_nix_to_w32 () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - func_convert_core_file_wine_to_w32 "$1" - func_to_host_file_result=$func_convert_core_file_wine_to_w32_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_w32 - - -# func_convert_file_msys_to_cygwin ARG -# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_file_msys_to_cygwin () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_cygpath -u "$func_convert_core_msys_to_w32_result" - func_to_host_file_result=$func_cygpath_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_cygwin - - -# func_convert_file_nix_to_cygwin ARG -# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed -# in a wine environment, working winepath, and LT_CYGPATH set. Returns result -# in func_to_host_file_result. -func_convert_file_nix_to_cygwin () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. - func_convert_core_file_wine_to_w32 "$1" - func_cygpath -u "$func_convert_core_file_wine_to_w32_result" - func_to_host_file_result=$func_cygpath_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_cygwin - - -############################################# -# $build to $host PATH CONVERSION FUNCTIONS # -############################################# -# invoked via '$to_host_path_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# The result will be available in $func_to_host_path_result. -# -# Path separators are also converted from $build format to $host format. If -# ARG begins or ends with a path separator character, it is preserved (but -# converted to $host format) on output. -# -# All path conversion functions are named using the following convention: -# file name conversion function : func_convert_file_X_to_Y () -# path conversion function : func_convert_path_X_to_Y () -# where, for any given $build/$host combination the 'X_to_Y' value is the -# same. If conversion functions are added for new $build/$host combinations, -# the two new functions must follow this pattern, or func_init_to_host_path_cmd -# will break. - - -# func_init_to_host_path_cmd -# Ensures that function "pointer" variable $to_host_path_cmd is set to the -# appropriate value, based on the value of $to_host_file_cmd. -to_host_path_cmd= -func_init_to_host_path_cmd () -{ - $debug_cmd - - if test -z "$to_host_path_cmd"; then - func_stripname 'func_convert_file_' '' "$to_host_file_cmd" - to_host_path_cmd=func_convert_path_$func_stripname_result - fi -} - - -# func_to_host_path ARG -# Converts the path ARG from $build format to $host format. Return result -# in func_to_host_path_result. -func_to_host_path () -{ - $debug_cmd - - func_init_to_host_path_cmd - $to_host_path_cmd "$1" -} -# end func_to_host_path - - -# func_convert_path_noop ARG -# Copy ARG to func_to_host_path_result. -func_convert_path_noop () -{ - func_to_host_path_result=$1 -} -# end func_convert_path_noop - - -# func_convert_path_msys_to_w32 ARG -# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_path_result. -func_convert_path_msys_to_w32 () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # Remove leading and trailing path separator characters from ARG. MSYS - # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; - # and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result=$func_convert_core_msys_to_w32_result - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_msys_to_w32 - - -# func_convert_path_cygwin_to_w32 ARG -# Convert path ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_path_cygwin_to_w32 () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_cygwin_to_w32 - - -# func_convert_path_nix_to_w32 ARG -# Convert path ARG from *nix to w32 format. Requires a wine environment and -# a working winepath. Returns result in func_to_host_file_result. -func_convert_path_nix_to_w32 () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result=$func_convert_core_path_wine_to_w32_result - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_nix_to_w32 - - -# func_convert_path_msys_to_cygwin ARG -# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_path_msys_to_cygwin () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_msys_to_w32_result" - func_to_host_path_result=$func_cygpath_result - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_msys_to_cygwin - - -# func_convert_path_nix_to_cygwin ARG -# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a -# a wine environment, working winepath, and LT_CYGPATH set. Returns result in -# func_to_host_file_result. -func_convert_path_nix_to_cygwin () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # Remove leading and trailing path separator characters from - # ARG. msys behavior is inconsistent here, cygpath turns them - # into '.;' and ';.', and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" - func_to_host_path_result=$func_cygpath_result - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_nix_to_cygwin - - -# func_dll_def_p FILE -# True iff FILE is a Windows DLL '.def' file. -# Keep in sync with _LT_DLL_DEF_P in libtool.m4 -func_dll_def_p () -{ - $debug_cmd - - func_dll_def_p_tmp=`$SED -n \ - -e 's/^[ ]*//' \ - -e '/^\(;.*\)*$/d' \ - -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ - -e q \ - "$1"` - test DEF = "$func_dll_def_p_tmp" -} - - -# func_mode_compile arg... -func_mode_compile () -{ - $debug_cmd - - # Get the compilation command and the source file. - base_compile= - srcfile=$nonopt # always keep a non-empty value in "srcfile" - suppress_opt=yes - suppress_output= - arg_mode=normal - libobj= - later= - pie_flag= - - for arg - do - case $arg_mode in - arg ) - # do not "continue". Instead, add this to base_compile - lastarg=$arg - arg_mode=normal - ;; - - target ) - libobj=$arg - arg_mode=normal - continue - ;; - - normal ) - # Accept any command-line options. - case $arg in - -o) - test -n "$libobj" && \ - func_fatal_error "you cannot specify '-o' more than once" - arg_mode=target - continue - ;; - - -pie | -fpie | -fPIE) - func_append pie_flag " $arg" - continue - ;; - - -shared | -static | -prefer-pic | -prefer-non-pic) - func_append later " $arg" - continue - ;; - - -no-suppress) - suppress_opt=no - continue - ;; - - -Xcompiler) - arg_mode=arg # the next one goes into the "base_compile" arg list - continue # The current "srcfile" will either be retained or - ;; # replaced later. I would guess that would be a bug. - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - lastarg= - save_ifs=$IFS; IFS=, - for arg in $args; do - IFS=$save_ifs - func_append_quoted lastarg "$arg" - done - IFS=$save_ifs - func_stripname ' ' '' "$lastarg" - lastarg=$func_stripname_result - - # Add the arguments to base_compile. - func_append base_compile " $lastarg" - continue - ;; - - *) - # Accept the current argument as the source file. - # The previous "srcfile" becomes the current argument. - # - lastarg=$srcfile - srcfile=$arg - ;; - esac # case $arg - ;; - esac # case $arg_mode - - # Aesthetically quote the previous argument. - func_append_quoted base_compile "$lastarg" - done # for arg - - case $arg_mode in - arg) - func_fatal_error "you must specify an argument for -Xcompile" - ;; - target) - func_fatal_error "you must specify a target with '-o'" - ;; - *) - # Get the name of the library object. - test -z "$libobj" && { - func_basename "$srcfile" - libobj=$func_basename_result - } - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - case $libobj in - *.[cCFSifmso] | \ - *.ada | *.adb | *.ads | *.asm | \ - *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) - func_xform "$libobj" - libobj=$func_xform_result - ;; - esac - - case $libobj in - *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; - *) - func_fatal_error "cannot determine name of library object from '$libobj'" - ;; - esac - - func_infer_tag $base_compile - - for arg in $later; do - case $arg in - -shared) - test yes = "$build_libtool_libs" \ - || func_fatal_configuration "cannot build a shared library" - build_old_libs=no - continue - ;; - - -static) - build_libtool_libs=no - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - esac - done - - func_quote_for_eval "$libobj" - test "X$libobj" != "X$func_quote_for_eval_result" \ - && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && func_warning "libobj name '$libobj' may not contain shell special characters." - func_dirname_and_basename "$obj" "/" "" - objname=$func_basename_result - xdir=$func_dirname_result - lobj=$xdir$objdir/$objname - - test -z "$base_compile" && \ - func_fatal_help "you must specify a compilation command" - - # Delete any leftover library objects. - if test yes = "$build_old_libs"; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2* | cegcc*) - pic_mode=default - ;; - esac - if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test no = "$compiler_c_o"; then - output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext - lockfile=$output_obj.lock - else - output_obj= - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test yes = "$need_locks"; then - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - elif test warn = "$need_locks"; then - if test -f "$lockfile"; then - $ECHO "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support '-c' and '-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - func_append removelist " $output_obj" - $ECHO "$srcfile" > "$lockfile" - fi - - $opt_dry_run || $RM $removelist - func_append removelist " $lockfile" - trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - - func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 - srcfile=$func_to_tool_file_result - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result - - # Only build a PIC object if we are building libtool libraries. - if test yes = "$build_libtool_libs"; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - if test no != "$pic_mode"; then - command="$base_compile $qsrcfile $pic_flag" - else - # Don't build PIC code - command="$base_compile $qsrcfile" - fi - - func_mkdir_p "$xdir$objdir" - - if test -z "$output_obj"; then - # Place PIC objects in $objdir - func_append command " -o $lobj" - fi - - func_show_eval_locale "$command" \ - 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - - if test warn = "$need_locks" && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support '-c' and '-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - func_show_eval '$MV "$output_obj" "$lobj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - - # Allow error messages only from the first compilation. - if test yes = "$suppress_opt"; then - suppress_output=' >/dev/null 2>&1' - fi - fi - - # Only build a position-dependent object if we build old libraries. - if test yes = "$build_old_libs"; then - if test yes != "$pic_mode"; then - # Don't build PIC code - command="$base_compile $qsrcfile$pie_flag" - else - command="$base_compile $qsrcfile $pic_flag" - fi - if test yes = "$compiler_c_o"; then - func_append command " -o $obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - func_append command "$suppress_output" - func_show_eval_locale "$command" \ - '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - - if test warn = "$need_locks" && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support '-c' and '-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - func_show_eval '$MV "$output_obj" "$obj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - fi - - $opt_dry_run || { - func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - - # Unlock the critical section if it was locked - if test no != "$need_locks"; then - removelist=$lockfile - $RM "$lockfile" - fi - } - - exit $EXIT_SUCCESS -} - -$opt_help || { - test compile = "$opt_mode" && func_mode_compile ${1+"$@"} -} - -func_mode_help () -{ - # We need to display help for each of the modes. - case $opt_mode in - "") - # Generic help is extracted from the usage comments - # at the start of this file. - func_help - ;; - - clean) - $ECHO \ -"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - - compile) - $ECHO \ -"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to build PIC objects only - -prefer-non-pic try to build non-PIC objects only - -shared do not build a '.o' file suitable for static linking - -static only build a '.o' file suitable for static linking - -Wc,FLAG pass FLAG directly to the compiler - -COMPILE-COMMAND is a command to be used in creating a 'standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix '.c' with the -library object suffix, '.lo'." - ;; - - execute) - $ECHO \ -"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to '-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - - finish) - $ECHO \ -"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the '--dry-run' option if you just want to see what would be executed." - ;; - - install) - $ECHO \ -"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the 'install' or 'cp' program. - -The following components of INSTALL-COMMAND are treated specially: - - -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - - link) - $ECHO \ -"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -bindir BINDIR specify path to binaries directory (for systems where - libraries must be found in the PATH setting at runtime) - -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE use a list of object files found in FILE to specify objects - -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -shared only do dynamic linking of libtool libraries - -shrext SUFFIX override the standard shared library file extension - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -weak LIBNAME declare that the target provides the LIBNAME interface - -Wc,FLAG - -Xcompiler FLAG pass linker-specific FLAG directly to the compiler - -Wl,FLAG - -Xlinker FLAG pass linker-specific FLAG directly to the linker - -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) - -All other options (arguments beginning with '-') are ignored. - -Every other argument is treated as a filename. Files ending in '.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in '.la', then a libtool library is created, -only library objects ('.lo' files) may be specified, and '-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created -using 'ar' and 'ranlib', or on Windows using 'lib'. - -If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file -is created, otherwise an executable program is created." - ;; - - uninstall) - $ECHO \ -"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - - *) - func_fatal_help "invalid operation mode '$opt_mode'" - ;; - esac - - echo - $ECHO "Try '$progname --help' for more information about other modes." -} - -# Now that we've collected a possible --mode arg, show help if necessary -if $opt_help; then - if test : = "$opt_help"; then - func_mode_help - else - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - func_mode_help - done - } | $SED -n '1p; 2,$s/^Usage:/ or: /p' - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - echo - func_mode_help - done - } | - $SED '1d - /^When reporting/,/^Report/{ - H - d - } - $x - /information about other modes/d - /more detailed .*MODE/d - s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' - fi - exit $? -fi - - -# func_mode_execute arg... -func_mode_execute () -{ - $debug_cmd - - # The first argument is the command name. - cmd=$nonopt - test -z "$cmd" && \ - func_fatal_help "you must specify a COMMAND" - - # Handle -dlopen flags immediately. - for file in $opt_dlopen; do - test -f "$file" \ - || func_fatal_help "'$file' is not a file" - - dir= - case $file in - *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "'$lib' is not a valid libtool archive" - - # Read the libtool library. - dlname= - library_names= - func_source "$file" - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && \ - func_warning "'$file' was not linked with '-export-dynamic'" - continue - fi - - func_dirname "$file" "" "." - dir=$func_dirname_result - - if test -f "$dir/$objdir/$dlname"; then - func_append dir "/$objdir" - else - if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" - fi - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - func_dirname "$file" "" "." - dir=$func_dirname_result - ;; - - *) - func_warning "'-dlopen' is ignored for non-libtool libraries and objects" - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir=$absdir - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic=$magic - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -* | *.la | *.lo ) ;; - *) - # Do a test to see if this is really a libtool program. - if func_ltwrapper_script_p "$file"; then - func_source "$file" - # Transform arg to wrapped name. - file=$progdir/$program - elif func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - func_source "$func_ltwrapper_scriptname_result" - # Transform arg to wrapped name. - file=$progdir/$program - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - func_append_quoted args "$file" - done - - if $opt_dry_run; then - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - echo "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS - else - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved environment variables - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - else - $lt_unset $lt_var - fi" - done - - # Now prepare to actually exec the command. - exec_cmd=\$cmd$args - fi -} - -test execute = "$opt_mode" && func_mode_execute ${1+"$@"} - - -# func_mode_finish arg... -func_mode_finish () -{ - $debug_cmd - - libs= - libdirs= - admincmds= - - for opt in "$nonopt" ${1+"$@"} - do - if test -d "$opt"; then - func_append libdirs " $opt" - - elif test -f "$opt"; then - if func_lalib_unsafe_p "$opt"; then - func_append libs " $opt" - else - func_warning "'$opt' is not a valid libtool archive" - fi - - else - func_fatal_error "invalid argument '$opt'" - fi - done - - if test -n "$libs"; then - if test -n "$lt_sysroot"; then - sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` - sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" - else - sysroot_cmd= - fi - - # Remove sysroot references - if $opt_dry_run; then - for lib in $libs; do - echo "removing references to $lt_sysroot and '=' prefixes from $lib" - done - else - tmpdir=`func_mktempdir` - for lib in $libs; do - $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ - > $tmpdir/tmp-la - mv -f $tmpdir/tmp-la $lib - done - ${RM}r "$tmpdir" - fi - fi - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - func_execute_cmds "$finish_cmds" 'admincmds="$admincmds -'"$cmd"'"' - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || func_append admincmds " - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - $opt_quiet && exit $EXIT_SUCCESS - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the '-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the '$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the '$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $ECHO " - use the '$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" - fi - echo - - echo "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" - echo "pages." - ;; - *) - echo "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - echo "----------------------------------------------------------------------" - fi - exit $EXIT_SUCCESS -} - -test finish = "$opt_mode" && func_mode_finish ${1+"$@"} - - -# func_mode_install arg... -func_mode_install () -{ - $debug_cmd - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || - # Allow the use of GNU shtool's install command. - case $nonopt in *shtool*) :;; *) false;; esac - then - # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " - arg=$1 - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - func_quote_for_eval "$arg" - func_append install_prog "$func_quote_for_eval_result" - install_shared_prog=$install_prog - case " $install_prog " in - *[\\\ /]cp\ *) install_cp=: ;; - *) install_cp=false ;; - esac - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=false - stripme= - no_mode=: - for arg - do - arg2= - if test -n "$dest"; then - func_append files " $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=: ;; - -f) - if $install_cp; then :; else - prev=$arg - fi - ;; - -g | -m | -o) - prev=$arg - ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - if test X-m = "X$prev" && test -n "$install_override_mode"; then - arg2=$install_override_mode - no_mode=false - fi - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - func_quote_for_eval "$arg" - func_append install_prog " $func_quote_for_eval_result" - if test -n "$arg2"; then - func_quote_for_eval "$arg2" - fi - func_append install_shared_prog " $func_quote_for_eval_result" - done - - test -z "$install_prog" && \ - func_fatal_help "you must specify an install program" - - test -n "$prev" && \ - func_fatal_help "the '$prev' option requires an argument" - - if test -n "$install_override_mode" && $no_mode; then - if $install_cp; then :; else - func_quote_for_eval "$install_override_mode" - func_append install_shared_prog " -m $func_quote_for_eval_result" - fi - fi - - if test -z "$files"; then - if test -z "$dest"; then - func_fatal_help "no file or destination specified" - else - func_fatal_help "you must specify a destination" - fi - fi - - # Strip any trailing slash from the destination. - func_stripname '' '/' "$dest" - dest=$func_stripname_result - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=: - if $isdir; then - destdir=$dest - destname= - else - func_dirname_and_basename "$dest" "" "." - destdir=$func_dirname_result - destname=$func_basename_result - - # Not a directory, so check to see that there is only one file specified. - set dummy $files; shift - test "$#" -gt 1 && \ - func_fatal_help "'$dest' is not a directory" - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - func_fatal_help "'$destdir' must be an absolute directory name" - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic=$magic - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - func_append staticlibs " $file" - ;; - - *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "'$file' is not a valid libtool archive" - - library_names= - old_library= - relink_command= - func_source "$file" - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) func_append current_libdirs " $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) func_append future_libdirs " $libdir" ;; - esac - fi - - func_dirname "$file" "/" "" - dir=$func_dirname_result - func_append dir "$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` - fi - - func_warning "relinking '$file'" - func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' - fi - - # See the names of the shared library. - set dummy $library_names; shift - if test -n "$1"; then - realname=$1 - shift - - srcname=$realname - test -n "$relink_command" && srcname=${realname}T - - # Install the shared library and build the symlinks. - func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ - 'exit $?' - tstripme=$stripme - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - case $realname in - *.dll.a) - tstripme= - ;; - esac - ;; - os2*) - case $realname in - *_dll.a) - tstripme= - ;; - esac - ;; - esac - if test -n "$tstripme" && test -n "$striplib"; then - func_show_eval "$striplib $destdir/$realname" 'exit $?' - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try 'ln -sf' first, because the 'ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - test "$linkname" != "$realname" \ - && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" - done - fi - - # Do each command in the postinstall commands. - lib=$destdir/$realname - func_execute_cmds "$postinstall_cmds" 'exit $?' - fi - - # Install the pseudo-library for information purposes. - func_basename "$file" - name=$func_basename_result - instname=$dir/${name}i - func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - - # Maybe install the static library, too. - test -n "$old_library" && func_append staticlibs " $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile=$destdir/$destname - else - func_basename "$file" - destfile=$func_basename_result - destfile=$destdir/$destfile - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - func_lo2o "$destfile" - staticdest=$func_lo2o_result - ;; - *.$objext) - staticdest=$destfile - destfile= - ;; - *) - func_fatal_help "cannot copy a libtool object to '$destfile'" - ;; - esac - - # Install the libtool object if requested. - test -n "$destfile" && \ - func_show_eval "$install_prog $file $destfile" 'exit $?' - - # Install the old object if enabled. - if test yes = "$build_old_libs"; then - # Deduce the name of the old-style object file. - func_lo2o "$file" - staticobj=$func_lo2o_result - func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile=$destdir/$destname - else - func_basename "$file" - destfile=$func_basename_result - destfile=$destdir/$destfile - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext= - case $file in - *.exe) - if test ! -f "$file"; then - func_stripname '' '.exe' "$file" - file=$func_stripname_result - stripped_ext=.exe - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin* | *mingw*) - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - wrapper=$func_ltwrapper_scriptname_result - else - func_stripname '' '.exe' "$file" - wrapper=$func_stripname_result - fi - ;; - *) - wrapper=$file - ;; - esac - if func_ltwrapper_script_p "$wrapper"; then - notinst_deplibs= - relink_command= - - func_source "$wrapper" - - # Check the variables that should have been set. - test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script '$wrapper'" - - finalize=: - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - func_source "$lib" - fi - libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` - if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "'$lib' has not been installed in '$libdir'" - finalize=false - fi - done - - relink_command= - func_source "$wrapper" - - outputname= - if test no = "$fast_install" && test -n "$relink_command"; then - $opt_dry_run || { - if $finalize; then - tmpdir=`func_mktempdir` - func_basename "$file$stripped_ext" - file=$func_basename_result - outputname=$tmpdir/$file - # Replace the output file specification. - relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` - - $opt_quiet || { - func_quote_for_expand "$relink_command" - eval "func_echo $func_quote_for_expand_result" - } - if eval "$relink_command"; then : - else - func_error "error: relink '$file' with the above command before installing it" - $opt_dry_run || ${RM}r "$tmpdir" - continue - fi - file=$outputname - else - func_warning "cannot relink '$file'" - fi - } - else - # Install the binary that we compiled earlier. - file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - func_stripname '' '.exe' "$destfile" - destfile=$func_stripname_result - ;; - esac - ;; - esac - func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' - $opt_dry_run || if test -n "$outputname"; then - ${RM}r "$tmpdir" - fi - ;; - esac - done - - for file in $staticlibs; do - func_basename "$file" - name=$func_basename_result - - # Set up the ranlib parameters. - oldlib=$destdir/$name - func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 - tool_oldlib=$func_to_tool_file_result - - func_show_eval "$install_prog \$file \$oldlib" 'exit $?' - - if test -n "$stripme" && test -n "$old_striplib"; then - func_show_eval "$old_striplib $tool_oldlib" 'exit $?' - fi - - # Do each command in the postinstall commands. - func_execute_cmds "$old_postinstall_cmds" 'exit $?' - done - - test -n "$future_libdirs" && \ - func_warning "remember to run '$progname --finish$future_libdirs'" - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi -} - -test install = "$opt_mode" && func_mode_install ${1+"$@"} - - -# func_generate_dlsyms outputname originator pic_p -# Extract symbols from dlprefiles and create ${outputname}S.o with -# a dlpreopen symbol table. -func_generate_dlsyms () -{ - $debug_cmd - - my_outputname=$1 - my_originator=$2 - my_pic_p=${3-false} - my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` - my_dlsyms= - - if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms=${my_outputname}S.c - else - func_error "not configured to extract global symbols from dlpreopened files" - fi - fi - - if test -n "$my_dlsyms"; then - case $my_dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist=$output_objdir/$my_outputname.nm - - func_show_eval "$RM $nlist ${nlist}S ${nlist}T" - - # Parse the name list into a source file. - func_verbose "creating $output_objdir/$my_dlsyms" - - $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) -#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" -#endif - -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE -/* DATA imports from DLLs on WIN32 can't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined __osf__ -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - -#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) - -/* External symbol declarations for the compiler. */\ -" - - if test yes = "$dlself"; then - func_verbose "generating symbol list for '$output'" - - $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` - for progfile in $progfiles; do - func_to_tool_file "$progfile" func_convert_file_msys_to_w32 - func_verbose "extracting global C symbols from '$func_to_tool_file_result'" - $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $opt_dry_run || { - eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - if test -n "$export_symbols_regex"; then - $opt_dry_run || { - eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols=$output_objdir/$outputname.exp - $opt_dry_run || { - $RM $export_symbols - eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - } - else - $opt_dry_run || { - eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - case $host in - *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - } - fi - fi - - for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from '$dlprefile'" - func_basename "$dlprefile" - name=$func_basename_result - case $host in - *cygwin* | *mingw* | *cegcc* ) - # if an import library, we need to obtain dlname - if func_win32_import_lib_p "$dlprefile"; then - func_tr_sh "$dlprefile" - eval "curr_lafile=\$libfile_$func_tr_sh_result" - dlprefile_dlbasename= - if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then - # Use subshell, to avoid clobbering current variable values - dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` - if test -n "$dlprefile_dlname"; then - func_basename "$dlprefile_dlname" - dlprefile_dlbasename=$func_basename_result - else - # no lafile. user explicitly requested -dlpreopen . - $sharedlib_from_linklib_cmd "$dlprefile" - dlprefile_dlbasename=$sharedlib_from_linklib_result - fi - fi - $opt_dry_run || { - if test -n "$dlprefile_dlbasename"; then - eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' - else - func_warning "Could not compute DLL name from $name" - eval '$ECHO ": $name " >> "$nlist"' - fi - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | - $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" - } - else # not an import lib - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - fi - ;; - *) - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - ;; - esac - done - - $opt_dry_run || { - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $MV "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if $GREP -v "^: " < "$nlist" | - if sort -k 3 /dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - $GREP -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$my_dlsyms" - fi - - func_show_eval '$RM "${nlist}I"' - if test -n "$global_symbol_to_import"; then - eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' - fi - - echo >> "$output_objdir/$my_dlsyms" "\ - -/* The mapping between symbol names and symbols. */ -typedef struct { - const char *name; - void *address; -} lt_dlsymlist; -extern LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[];\ -" - - if test -s "$nlist"I; then - echo >> "$output_objdir/$my_dlsyms" "\ -static void lt_syminit(void) -{ - LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; - for (; symbol->name; ++symbol) - {" - $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" - echo >> "$output_objdir/$my_dlsyms" "\ - } -}" - fi - echo >> "$output_objdir/$my_dlsyms" "\ -LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[] = -{ {\"$my_originator\", (void *) 0}," - - if test -s "$nlist"I; then - echo >> "$output_objdir/$my_dlsyms" "\ - {\"@INIT@\", (void *) <_syminit}," - fi - - case $need_lib_prefix in - no) - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - *) - eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - esac - echo >> "$output_objdir/$my_dlsyms" "\ - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_${my_prefix}_LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - } # !$opt_dry_run - - pic_flag_for_symtable= - case "$compile_command " in - *" -static "*) ;; - *) - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; - *-*-hpux*) - pic_flag_for_symtable=" $pic_flag" ;; - *) - $my_pic_p && pic_flag_for_symtable=" $pic_flag" - ;; - esac - ;; - esac - symtab_cflags= - for arg in $LTCFLAGS; do - case $arg in - -pie | -fpie | -fPIE) ;; - *) func_append symtab_cflags " $arg" ;; - esac - done - - # Now compile the dynamic symbol file. - func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' - - # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' - - # Transform the symbol file into the correct name. - symfileobj=$output_objdir/${my_outputname}S.$objext - case $host in - *cygwin* | *mingw* | *cegcc* ) - if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - else - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` - fi - ;; - *) - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` - ;; - esac - ;; - *) - func_fatal_error "unknown suffix for '$my_dlsyms'" - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` - fi -} - -# func_cygming_gnu_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is a GNU/binutils-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_gnu_implib_p () -{ - $debug_cmd - - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` - test -n "$func_cygming_gnu_implib_tmp" -} - -# func_cygming_ms_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is an MS-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_ms_implib_p () -{ - $debug_cmd - - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` - test -n "$func_cygming_ms_implib_tmp" -} - -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -# Despite the name, also deal with 64 bit binaries. -func_win32_libid () -{ - $debug_cmd - - win32_libid_type=unknown - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then - case $nm_interface in - "MS dumpbin") - if func_cygming_ms_implib_p "$1" || - func_cygming_gnu_implib_p "$1" - then - win32_nmres=import - else - win32_nmres= - fi - ;; - *) - func_to_tool_file "$1" func_convert_file_msys_to_w32 - win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | - $SED -n -e ' - 1,100{ - / I /{ - s|.*|import| - p - q - } - }'` - ;; - esac - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac - fi - ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac - ;; - esac - $ECHO "$win32_libid_type" -} - -# func_cygming_dll_for_implib ARG -# -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib () -{ - $debug_cmd - - sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` -} - -# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs -# -# The is the core of a fallback implementation of a -# platform-specific function to extract the name of the -# DLL associated with the specified import library LIBNAME. -# -# SECTION_NAME is either .idata$6 or .idata$7, depending -# on the platform and compiler that created the implib. -# -# Echos the name of the DLL associated with the -# specified import library. -func_cygming_dll_for_implib_fallback_core () -{ - $debug_cmd - - match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` - $OBJDUMP -s --section "$1" "$2" 2>/dev/null | - $SED '/^Contents of section '"$match_literal"':/{ - # Place marker at beginning of archive member dllname section - s/.*/====MARK====/ - p - d - } - # These lines can sometimes be longer than 43 characters, but - # are always uninteresting - /:[ ]*file format pe[i]\{,1\}-/d - /^In archive [^:]*:/d - # Ensure marker is printed - /^====MARK====/p - # Remove all lines with less than 43 characters - /^.\{43\}/!d - # From remaining lines, remove first 43 characters - s/^.\{43\}//' | - $SED -n ' - # Join marker and all lines until next marker into a single line - /^====MARK====/ b para - H - $ b para - b - :para - x - s/\n//g - # Remove the marker - s/^====MARK====// - # Remove trailing dots and whitespace - s/[\. \t]*$// - # Print - /./p' | - # we now have a list, one entry per line, of the stringified - # contents of the appropriate section of all members of the - # archive that possess that section. Heuristic: eliminate - # all those that have a first or second character that is - # a '.' (that is, objdump's representation of an unprintable - # character.) This should work for all archives with less than - # 0x302f exports -- but will fail for DLLs whose name actually - # begins with a literal '.' or a single character followed by - # a '.'. - # - # Of those that remain, print the first one. - $SED -e '/^\./d;/^.\./d;q' -} - -# func_cygming_dll_for_implib_fallback ARG -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# -# This fallback implementation is for use when $DLLTOOL -# does not support the --identify-strict option. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib_fallback () -{ - $debug_cmd - - if func_cygming_gnu_implib_p "$1"; then - # binutils import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` - elif func_cygming_ms_implib_p "$1"; then - # ms-generated import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` - else - # unknown - sharedlib_from_linklib_result= - fi -} - - -# func_extract_an_archive dir oldlib -func_extract_an_archive () -{ - $debug_cmd - - f_ex_an_ar_dir=$1; shift - f_ex_an_ar_oldlib=$1 - if test yes = "$lock_old_archive_extraction"; then - lockfile=$f_ex_an_ar_oldlib.lock - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - fi - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ - 'stat=$?; rm -f "$lockfile"; exit $stat' - if test yes = "$lock_old_archive_extraction"; then - $opt_dry_run || rm -f "$lockfile" - fi - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" - fi -} - - -# func_extract_archives gentop oldlib ... -func_extract_archives () -{ - $debug_cmd - - my_gentop=$1; shift - my_oldlibs=${1+"$@"} - my_oldobjs= - my_xlib= - my_xabs= - my_xdir= - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - func_basename "$my_xlib" - my_xlib=$func_basename_result - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - func_arith $extracted_serial + 1 - extracted_serial=$func_arith_result - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir=$my_gentop/$my_xlib_u - - func_mkdir_p "$my_xdir" - - case $host in - *-darwin*) - func_verbose "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - $opt_dry_run || { - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - func_basename "$darwin_archive" - darwin_base_archive=$func_basename_result - darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` - if test -n "$darwin_arches"; then - darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches; do - func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" - $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" - cd "unfat-$$/$darwin_base_archive-$darwin_arch" - func_extract_an_archive "`pwd`" "$darwin_base_archive" - cd "$darwin_curdir" - $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" - done # $darwin_arches - ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` - $LIPO -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - $RM -rf unfat-$$ - cd "$darwin_orig_dir" - else - cd $darwin_orig_dir - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - } # !$opt_dry_run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` - done - - func_extract_archives_result=$my_oldobjs -} - - -# func_emit_wrapper [arg=no] -# -# Emit a libtool wrapper script on stdout. -# Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variables -# set therein. -# -# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory where it is stored is -# the $objdir directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=${1-no} - - $ECHO "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE) $VERSION -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='$sed_quote_subst' - -# Be Bourne compatible -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variables: - generated_by_libtool_version='$macro_version' - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$ECHO are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - file=\"\$0\"" - - qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` - $ECHO "\ - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - ECHO=\"$qECHO\" - fi - -# Very basic option parsing. These options are (a) specific to -# the libtool wrapper, (b) are identical between the wrapper -# /script/ and the wrapper /executable/ that is used only on -# windows platforms, and (c) all begin with the string "--lt-" -# (application programs are unlikely to have options that match -# this pattern). -# -# There are only two supported options: --lt-debug and -# --lt-dump-script. There is, deliberately, no --lt-help. -# -# The first argument to this parsing function should be the -# script's $0 value, followed by "$@". -lt_option_debug= -func_parse_lt_options () -{ - lt_script_arg0=\$0 - shift - for lt_opt - do - case \"\$lt_opt\" in - --lt-debug) lt_option_debug=1 ;; - --lt-dump-script) - lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` - test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. - lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` - cat \"\$lt_dump_D/\$lt_dump_F\" - exit 0 - ;; - --lt-*) - \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 - exit 1 - ;; - esac - done - - # Print the debug banner immediately: - if test -n \"\$lt_option_debug\"; then - echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 - fi -} - -# Used when --lt-debug. Prints its arguments to stdout -# (redirection is the responsibility of the caller) -func_lt_dump_args () -{ - lt_dump_args_N=1; - for lt_arg - do - \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" - lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` - done -} - -# Core function for launching the target application -func_exec_program_core () -{ -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 -} - -# A function to encapsulate launching the target application -# Strips options in the --lt-* namespace from \$@ and -# launches target application with the remaining arguments. -func_exec_program () -{ - case \" \$* \" in - *\\ --lt-*) - for lt_wr_arg - do - case \$lt_wr_arg in - --lt-*) ;; - *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; - esac - shift - done ;; - esac - func_exec_program_core \${1+\"\$@\"} -} - - # Parse options - func_parse_lt_options \"\$0\" \${1+\"\$@\"} - - # Find the directory that this script lives in. - thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` - done - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 - if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then - # special case for '.' - if test \"\$thisdir\" = \".\"; then - thisdir=\`pwd\` - fi - # remove .libs from thisdir - case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; - $objdir ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test yes = "$fast_install"; then - $ECHO "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $MKDIR \"\$progdir\" - else - $RM \"\$progdir/\$file\" - fi" - - $ECHO "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - \$ECHO \"\$relink_command_output\" >&2 - $RM \"\$progdir/\$file\" - exit 1 - fi - fi - - $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $RM \"\$progdir/\$program\"; - $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $RM \"\$progdir/\$file\" - fi" - else - $ECHO "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $ECHO "\ - - if test -f \"\$progdir/\$program\"; then" - - # fixup the dll searchpath if we need to. - # - # Fix the DLL searchpath if we need to. Do this before prepending - # to shlibpath, because on Windows, both are PATH and uninstalled - # libraries must come first. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - # Export our shlibpath_var if we have one. - if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $ECHO "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` - - export $shlibpath_var -" - fi - - $ECHO "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. - func_exec_program \${1+\"\$@\"} - fi - else - # The program doesn't exist. - \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 - \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" -} - - -# func_emit_cwrapperexe_src -# emit the source code for a wrapper executable on stdout -# Must ONLY be called from within func_mode_link because -# it depends on a number of variable set therein. -func_emit_cwrapperexe_src () -{ - cat < -#include -#ifdef _MSC_VER -# include -# include -# include -#else -# include -# include -# ifdef __CYGWIN__ -# include -# endif -#endif -#include -#include -#include -#include -#include -#include -#include -#include - -#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) - -/* declarations of non-ANSI functions */ -#if defined __MINGW32__ -# ifdef __STRICT_ANSI__ -int _putenv (const char *); -# endif -#elif defined __CYGWIN__ -# ifdef __STRICT_ANSI__ -char *realpath (const char *, char *); -int putenv (char *); -int setenv (const char *, const char *, int); -# endif -/* #elif defined other_platform || defined ... */ -#endif - -/* portability defines, excluding path handling macros */ -#if defined _MSC_VER -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -# define S_IXUSR _S_IEXEC -#elif defined __MINGW32__ -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -#elif defined __CYGWIN__ -# define HAVE_SETENV -# define FOPEN_WB "wb" -/* #elif defined other platforms ... */ -#endif - -#if defined PATH_MAX -# define LT_PATHMAX PATH_MAX -#elif defined MAXPATHLEN -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef S_IXOTH -# define S_IXOTH 0 -#endif -#ifndef S_IXGRP -# define S_IXGRP 0 -#endif - -/* path handling portability macros */ -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ - defined __OS2__ -# define HAVE_DOS_BASED_FILE_SYSTEM -# define FOPEN_WB "wb" -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#ifndef FOPEN_WB -# define FOPEN_WB "w" -#endif -#ifndef _O_BINARY -# define _O_BINARY 0 -#endif - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free (stale); stale = 0; } \ -} while (0) - -#if defined LT_DEBUGWRAPPER -static int lt_debug = 1; -#else -static int lt_debug = 0; -#endif - -const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ - -void *xmalloc (size_t num); -char *xstrdup (const char *string); -const char *base_name (const char *name); -char *find_executable (const char *wrapper); -char *chase_symlinks (const char *pathspec); -int make_executable (const char *path); -int check_executable (const char *path); -char *strendzap (char *str, const char *pat); -void lt_debugprintf (const char *file, int line, const char *fmt, ...); -void lt_fatal (const char *file, int line, const char *message, ...); -static const char *nonnull (const char *s); -static const char *nonempty (const char *s); -void lt_setenv (const char *name, const char *value); -char *lt_extend_str (const char *orig_value, const char *add, int to_end); -void lt_update_exe_path (const char *name, const char *value); -void lt_update_lib_path (const char *name, const char *value); -char **prepare_spawn (char **argv); -void lt_dump_script (FILE *f); -EOF - - cat <= 0) - && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) - return 1; - else - return 0; -} - -int -make_executable (const char *path) -{ - int rval = 0; - struct stat st; - - lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", - nonempty (path)); - if ((!path) || (!*path)) - return 0; - - if (stat (path, &st) >= 0) - { - rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); - } - return rval; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise - Does not chase symlinks, even on platforms that support them. -*/ -char * -find_executable (const char *wrapper) -{ - int has_slash = 0; - const char *p; - const char *p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - size_t tmp_len; - char *concat_name; - - lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", - nonempty (wrapper)); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined HAVE_DOS_BASED_FILE_SYSTEM - if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } -#if defined HAVE_DOS_BASED_FILE_SYSTEM - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char *path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char *q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR (*q)) - break; - p_len = (size_t) (q - p); - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); - tmp_len = strlen (tmp); - concat_name = - XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = - XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); - tmp_len = strlen (tmp); - concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - return NULL; -} - -char * -chase_symlinks (const char *pathspec) -{ -#ifndef S_ISLNK - return xstrdup (pathspec); -#else - char buf[LT_PATHMAX]; - struct stat s; - char *tmp_pathspec = xstrdup (pathspec); - char *p; - int has_symlinks = 0; - while (strlen (tmp_pathspec) && !has_symlinks) - { - lt_debugprintf (__FILE__, __LINE__, - "checking path component for symlinks: %s\n", - tmp_pathspec); - if (lstat (tmp_pathspec, &s) == 0) - { - if (S_ISLNK (s.st_mode) != 0) - { - has_symlinks = 1; - break; - } - - /* search backwards for last DIR_SEPARATOR */ - p = tmp_pathspec + strlen (tmp_pathspec) - 1; - while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - p--; - if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - { - /* no more DIR_SEPARATORS left */ - break; - } - *p = '\0'; - } - else - { - lt_fatal (__FILE__, __LINE__, - "error accessing file \"%s\": %s", - tmp_pathspec, nonnull (strerror (errno))); - } - } - XFREE (tmp_pathspec); - - if (!has_symlinks) - { - return xstrdup (pathspec); - } - - tmp_pathspec = realpath (pathspec, buf); - if (tmp_pathspec == 0) - { - lt_fatal (__FILE__, __LINE__, - "could not follow symlinks for %s", pathspec); - } - return xstrdup (tmp_pathspec); -#endif -} - -char * -strendzap (char *str, const char *pat) -{ - size_t len, patlen; - - assert (str != NULL); - assert (pat != NULL); - - len = strlen (str); - patlen = strlen (pat); - - if (patlen <= len) - { - str += len - patlen; - if (STREQ (str, pat)) - *str = '\0'; - } - return str; -} - -void -lt_debugprintf (const char *file, int line, const char *fmt, ...) -{ - va_list args; - if (lt_debug) - { - (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); - } -} - -static void -lt_error_core (int exit_status, const char *file, - int line, const char *mode, - const char *message, va_list ap) -{ - fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *file, int line, const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); - va_end (ap); -} - -static const char * -nonnull (const char *s) -{ - return s ? s : "(null)"; -} - -static const char * -nonempty (const char *s) -{ - return (s && !*s) ? "(empty)" : nonnull (s); -} - -void -lt_setenv (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_setenv) setting '%s' to '%s'\n", - nonnull (name), nonnull (value)); - { -#ifdef HAVE_SETENV - /* always make a copy, for consistency with !HAVE_SETENV */ - char *str = xstrdup (value); - setenv (name, str, 1); -#else - size_t len = strlen (name) + 1 + strlen (value) + 1; - char *str = XMALLOC (char, len); - sprintf (str, "%s=%s", name, value); - if (putenv (str) != EXIT_SUCCESS) - { - XFREE (str); - } -#endif - } -} - -char * -lt_extend_str (const char *orig_value, const char *add, int to_end) -{ - char *new_value; - if (orig_value && *orig_value) - { - size_t orig_value_len = strlen (orig_value); - size_t add_len = strlen (add); - new_value = XMALLOC (char, add_len + orig_value_len + 1); - if (to_end) - { - strcpy (new_value, orig_value); - strcpy (new_value + orig_value_len, add); - } - else - { - strcpy (new_value, add); - strcpy (new_value + add_len, orig_value); - } - } - else - { - new_value = xstrdup (add); - } - return new_value; -} - -void -lt_update_exe_path (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - /* some systems can't cope with a ':'-terminated path #' */ - size_t len = strlen (new_value); - while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) - { - new_value[--len] = '\0'; - } - lt_setenv (name, new_value); - XFREE (new_value); - } -} - -void -lt_update_lib_path (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - lt_setenv (name, new_value); - XFREE (new_value); - } -} - -EOF - case $host_os in - mingw*) - cat <<"EOF" - -/* Prepares an argument vector before calling spawn(). - Note that spawn() does not by itself call the command interpreter - (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : - ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); - GetVersionEx(&v); - v.dwPlatformId == VER_PLATFORM_WIN32_NT; - }) ? "cmd.exe" : "command.com"). - Instead it simply concatenates the arguments, separated by ' ', and calls - CreateProcess(). We must quote the arguments since Win32 CreateProcess() - interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a - special way: - - Space and tab are interpreted as delimiters. They are not treated as - delimiters if they are surrounded by double quotes: "...". - - Unescaped double quotes are removed from the input. Their only effect is - that within double quotes, space and tab are treated like normal - characters. - - Backslashes not followed by double quotes are not special. - - But 2*n+1 backslashes followed by a double quote become - n backslashes followed by a double quote (n >= 0): - \" -> " - \\\" -> \" - \\\\\" -> \\" - */ -#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -char ** -prepare_spawn (char **argv) -{ - size_t argc; - char **new_argv; - size_t i; - - /* Count number of arguments. */ - for (argc = 0; argv[argc] != NULL; argc++) - ; - - /* Allocate new argument vector. */ - new_argv = XMALLOC (char *, argc + 1); - - /* Put quoted arguments into the new argument vector. */ - for (i = 0; i < argc; i++) - { - const char *string = argv[i]; - - if (string[0] == '\0') - new_argv[i] = xstrdup ("\"\""); - else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) - { - int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); - size_t length; - unsigned int backslashes; - const char *s; - char *quoted_string; - char *p; - - length = 0; - backslashes = 0; - if (quote_around) - length++; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - length += backslashes + 1; - length++; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - length += backslashes + 1; - - quoted_string = XMALLOC (char, length + 1); - - p = quoted_string; - backslashes = 0; - if (quote_around) - *p++ = '"'; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - { - unsigned int j; - for (j = backslashes + 1; j > 0; j--) - *p++ = '\\'; - } - *p++ = c; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - { - unsigned int j; - for (j = backslashes; j > 0; j--) - *p++ = '\\'; - *p++ = '"'; - } - *p = '\0'; - - new_argv[i] = quoted_string; - } - else - new_argv[i] = (char *) string; - } - new_argv[argc] = NULL; - - return new_argv; -} -EOF - ;; - esac - - cat <<"EOF" -void lt_dump_script (FILE* f) -{ -EOF - func_emit_wrapper yes | - $SED -n -e ' -s/^\(.\{79\}\)\(..*\)/\1\ -\2/ -h -s/\([\\"]\)/\\\1/g -s/$/\\n/ -s/\([^\n]*\).*/ fputs ("\1", f);/p -g -D' - cat <<"EOF" -} -EOF -} -# end: func_emit_cwrapperexe_src - -# func_win32_import_lib_p ARG -# True if ARG is an import lib, as indicated by $file_magic_cmd -func_win32_import_lib_p () -{ - $debug_cmd - - case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in - *import*) : ;; - *) false ;; - esac -} - -# func_suncc_cstd_abi -# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! -# Several compiler flags select an ABI that is incompatible with the -# Cstd library. Avoid specifying it if any are in CXXFLAGS. -func_suncc_cstd_abi () -{ - $debug_cmd - - case " $compile_command " in - *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) - suncc_use_cstd_abi=no - ;; - *) - suncc_use_cstd_abi=yes - ;; - esac -} - -# func_mode_link arg... -func_mode_link () -{ - $debug_cmd - - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # what system we are compiling for in order to pass an extra - # flag for every libtool invocation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll that has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - ;; - *) - allow_undefined=yes - ;; - esac - libtool_args=$nonopt - base_compile="$nonopt $@" - compile_command=$nonopt - finalize_command=$nonopt - - compile_rpath= - finalize_rpath= - compile_shlibpath= - finalize_shlibpath= - convenience= - old_convenience= - deplibs= - old_deplibs= - compiler_flags= - linker_flags= - dllsearchpath= - lib_search_path=`pwd` - inst_prefix_dir= - new_inherited_linker_flags= - - avoid_version=no - bindir= - dlfiles= - dlprefiles= - dlself=no - export_dynamic=no - export_symbols= - export_symbols_regex= - generated= - libobjs= - ltlibs= - module=no - no_install=no - objs= - os2dllname= - non_pic_objects= - precious_files_regex= - prefer_static_libs=no - preload=false - prev= - prevarg= - release= - rpath= - xrpath= - perm_rpath= - temp_rpath= - thread_safe=no - vinfo= - vinfo_number=no - weak_libs= - single_module=$wl-single_module - func_infer_tag $base_compile - - # We need to know -static, to get the right output filenames. - for arg - do - case $arg in - -shared) - test yes != "$build_libtool_libs" \ - && func_fatal_configuration "cannot build a shared library" - build_old_libs=no - break - ;; - -all-static | -static | -static-libtool-libs) - case $arg in - -all-static) - if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then - func_warning "complete static linking is impossible in this configuration" - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - -static) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=built - ;; - -static-libtool-libs) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - esac - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg=$1 - shift - func_quote_for_eval "$arg" - qarg=$func_quote_for_eval_unquoted_result - func_append libtool_args " $func_quote_for_eval_result" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - func_append compile_command " @OUTPUT@" - func_append finalize_command " @OUTPUT@" - ;; - esac - - case $prev in - bindir) - bindir=$arg - prev= - continue - ;; - dlfiles|dlprefiles) - $preload || { - # Add the symbol object into the linking commands. - func_append compile_command " @SYMFILE@" - func_append finalize_command " @SYMFILE@" - preload=: - } - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test no = "$dlself"; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test dlprefiles = "$prev"; then - dlself=yes - elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test dlfiles = "$prev"; then - func_append dlfiles " $arg" - else - func_append dlprefiles " $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols=$arg - test -f "$arg" \ - || func_fatal_error "symbol file '$arg' does not exist" - prev= - continue - ;; - expsyms_regex) - export_symbols_regex=$arg - prev= - continue - ;; - framework) - case $host in - *-*-darwin*) - case "$deplibs " in - *" $qarg.ltframework "*) ;; - *) func_append deplibs " $qarg.ltframework" # this is fixed later - ;; - esac - ;; - esac - prev= - continue - ;; - inst_prefix) - inst_prefix_dir=$arg - prev= - continue - ;; - mllvm) - # Clang does not use LLVM to link, so we can simply discard any - # '-mllvm $arg' options when doing the link step. - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat "$save_arg"` - do -# func_append moreargs " $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test none = "$pic_object" && - test none = "$non_pic_object"; then - func_fatal_error "cannot find name of object for '$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - if test none != "$pic_object"; then - # Prepend the subdirectory the object is found in. - pic_object=$xdir$pic_object - - if test dlfiles = "$prev"; then - if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then - func_append dlfiles " $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test dlprefiles = "$prev"; then - # Preload the old-style object. - func_append dlprefiles " $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg=$pic_object - fi - - # Non-PIC object. - if test none != "$non_pic_object"; then - # Prepend the subdirectory the object is found in. - non_pic_object=$xdir$non_pic_object - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test none = "$pic_object"; then - arg=$non_pic_object - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object=$pic_object - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "'$arg' is not a valid libtool object" - fi - fi - done - else - func_fatal_error "link input file '$arg' does not exist" - fi - arg=$save_arg - prev= - continue - ;; - os2dllname) - os2dllname=$arg - prev= - continue - ;; - precious_regex) - precious_files_regex=$arg - prev= - continue - ;; - release) - release=-$arg - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - if test rpath = "$prev"; then - case "$rpath " in - *" $arg "*) ;; - *) func_append rpath " $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) func_append xrpath " $arg" ;; - esac - fi - prev= - continue - ;; - shrext) - shrext_cmds=$arg - prev= - continue - ;; - weak) - func_append weak_libs " $arg" - prev= - continue - ;; - xcclinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xcompiler) - func_append compiler_flags " $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xlinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $wl$qarg" - prev= - func_append compile_command " $wl$qarg" - func_append finalize_command " $wl$qarg" - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" - - prevarg=$arg - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - # See comment for -static flag below, for more details. - func_append compile_command " $link_static_flag" - func_append finalize_command " $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - func_fatal_error "'-allow-undefined' must not be used because it is the default" - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -bindir) - prev=bindir - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - func_fatal_error "more than one -exported-symbols argument is not allowed" - fi - if test X-export-symbols = "X$arg"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -framework) - prev=framework - continue - ;; - - -inst-prefix-dir) - prev=inst_prefix - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - func_append compile_command " $arg" - func_append finalize_command " $arg" - ;; - esac - continue - ;; - - -L*) - func_stripname "-L" '' "$arg" - if test -z "$func_stripname_result"; then - if test "$#" -gt 0; then - func_fatal_error "require no space between '-L' and '$1'" - else - func_fatal_error "need path for '-L' option" - fi - fi - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of '$dir'" - dir=$absdir - ;; - esac - case "$deplibs " in - *" -L$dir "* | *" $arg "*) - # Will only happen for absolute or sysroot arguments - ;; - *) - # Preserve sysroot, but never include relative directories - case $dir in - [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; - *) func_append deplibs " -L$dir" ;; - esac - func_append lib_search_path " $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$dir:"*) ;; - ::) dllsearchpath=$dir;; - *) func_append dllsearchpath ":$dir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; - esac - ;; - esac - continue - ;; - - -l*) - if test X-lc = "X$arg" || test X-lm = "X$arg"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-os2*) - # These systems don't actually have a C library (as such) - test X-lc = "X$arg" && continue - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) - # Do not include libc due to us having libc/libc_r. - test X-lc = "X$arg" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - func_append deplibs " System.ltframework" - continue - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - test X-lc = "X$arg" && continue - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - test X-lc = "X$arg" && continue - ;; - esac - elif test X-lc_r = "X$arg"; then - case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - func_append deplibs " $arg" - continue - ;; - - -mllvm) - prev=mllvm - continue - ;; - - -module) - module=yes - continue - ;; - - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot|--sysroot) - func_append compiler_flags " $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - prev=xcompiler - continue - ;; - - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - func_append compiler_flags " $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case "$new_inherited_linker_flags " in - *" $arg "*) ;; - * ) func_append new_inherited_linker_flags " $arg" ;; - esac - continue - ;; - - -multi_module) - single_module=$wl-multi_module - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) - # The PATH hackery in wrapper scripts is required on Windows - # and Darwin in order for the loader to find any dlls it needs. - func_warning "'-no-install' is ignored for $host" - func_warning "assuming '-no-fast-install' instead" - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -objectlist) - prev=objectlist - continue - ;; - - -os2dllname) - prev=os2dllname - continue - ;; - - -o) prev=output ;; - - -precious-files-regex) - prev=precious_regex - continue - ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - func_stripname '-R' '' "$arg" - dir=$func_stripname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - =*) - func_stripname '=' '' "$dir" - dir=$lt_sysroot$func_stripname_result - ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) func_append xrpath " $dir" ;; - esac - continue - ;; - - -shared) - # The effects of -shared are defined in a previous loop. - continue - ;; - - -shrext) - prev=shrext - continue - ;; - - -static | -static-libtool-libs) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - -version-number) - prev=vinfo - vinfo_number=yes - continue - ;; - - -weak) - prev=weak - continue - ;; - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs=$IFS; IFS=, - for flag in $args; do - IFS=$save_ifs - func_quote_for_eval "$flag" - func_append arg " $func_quote_for_eval_result" - func_append compiler_flags " $func_quote_for_eval_result" - done - IFS=$save_ifs - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Wl,*) - func_stripname '-Wl,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs=$IFS; IFS=, - for flag in $args; do - IFS=$save_ifs - func_quote_for_eval "$flag" - func_append arg " $wl$func_quote_for_eval_result" - func_append compiler_flags " $wl$func_quote_for_eval_result" - func_append linker_flags " $func_quote_for_eval_result" - done - IFS=$save_ifs - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - -XCClinker) - prev=xcclinker - continue - ;; - - # -msg_* for osf cc - -msg_*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - ;; - - # Flags to be passed through unchanged, with rationale: - # -64, -mips[0-9] enable 64-bit mode for the SGI compiler - # -r[0-9][0-9]* specify processor for the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler - # +DA*, +DD* enable 64-bit mode for the HP compiler - # -q* compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* architecture-specific flags for GCC - # -F/path path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* profiling flags for GCC - # -fstack-protector* stack protector flags for GCC - # @file GCC response files - # -tp=* Portland pgcc target processor selection - # --sysroot=* for sysroot support - # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization - # -stdlib=* select c++ std lib with clang - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - func_append compile_command " $arg" - func_append finalize_command " $arg" - func_append compiler_flags " $arg" - continue - ;; - - -Z*) - if test os2 = "`expr $host : '.*\(os2\)'`"; then - # OS/2 uses -Zxxx to specify OS/2-specific options - compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case $arg in - -Zlinker | -Zstack) - prev=xcompiler - ;; - esac - continue - else - # Otherwise treat like 'Some other compiler flag' below - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - fi - ;; - - # Some other compiler flag. - -* | +*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - ;; - - *.$objext) - # A standard object. - func_append objs " $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test none = "$pic_object" && - test none = "$non_pic_object"; then - func_fatal_error "cannot find name of object for '$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - test none = "$pic_object" || { - # Prepend the subdirectory the object is found in. - pic_object=$xdir$pic_object - - if test dlfiles = "$prev"; then - if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then - func_append dlfiles " $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test dlprefiles = "$prev"; then - # Preload the old-style object. - func_append dlprefiles " $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg=$pic_object - } - - # Non-PIC object. - if test none != "$non_pic_object"; then - # Prepend the subdirectory the object is found in. - non_pic_object=$xdir$non_pic_object - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test none = "$pic_object"; then - arg=$non_pic_object - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object=$pic_object - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "'$arg' is not a valid libtool object" - fi - fi - ;; - - *.$libext) - # An archive. - func_append deplibs " $arg" - func_append old_deplibs " $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - func_resolve_sysroot "$arg" - if test dlfiles = "$prev"; then - # This library was specified with -dlopen. - func_append dlfiles " $func_resolve_sysroot_result" - prev= - elif test dlprefiles = "$prev"; then - # The library was specified with -dlpreopen. - func_append dlprefiles " $func_resolve_sysroot_result" - prev= - else - func_append deplibs " $func_resolve_sysroot_result" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - done # argument parsing loop - - test -n "$prev" && \ - func_fatal_help "the '$prevarg' option requires an argument" - - if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - func_basename "$output" - outputname=$func_basename_result - libobjs_save=$libobjs - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - # Definition is injected by LT_CONFIG during libtool generation. - func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH" - - func_dirname "$output" "/" "" - output_objdir=$func_dirname_result$objdir - func_to_tool_file "$output_objdir/" - tool_output_objdir=$func_to_tool_file_result - # Create the object directory. - func_mkdir_p "$output_objdir" - - # Determine the type of output - case $output in - "") - func_fatal_help "you must specify an output file" - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - specialdeplibs= - - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if $opt_preserve_dup_deps; then - case "$libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append libs " $deplib" - done - - if test lib = "$linkmode"; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if $opt_duplicate_compiler_generated_deps; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; - esac - func_append pre_post_deps " $pre_post_dep" - done - fi - pre_post_deps= - fi - - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - - case $linkmode in - lib) - passes="conv dlpreopen link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - func_fatal_help "libraries can '-dlopen' only libtool libraries: $file" - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=false - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - - for pass in $passes; do - # The preopen pass in lib mode reverses $deplibs; put it back here - # so that -L comes before libs that need it for instance... - if test lib,link = "$linkmode,$pass"; then - ## FIXME: Find the place where the list is rebuilt in the wrong - ## order, and fix it there properly - tmp_deplibs= - for deplib in $deplibs; do - tmp_deplibs="$deplib $tmp_deplibs" - done - deplibs=$tmp_deplibs - fi - - if test lib,link = "$linkmode,$pass" || - test prog,scan = "$linkmode,$pass"; then - libs=$deplibs - deplibs= - fi - if test prog = "$linkmode"; then - case $pass in - dlopen) libs=$dlfiles ;; - dlpreopen) libs=$dlprefiles ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test lib,dlpreopen = "$linkmode,$pass"; then - # Collect and forward deplibs of preopened libtool libs - for lib in $dlprefiles; do - # Ignore non-libtool-libs - dependency_libs= - func_resolve_sysroot "$lib" - case $lib in - *.la) func_source "$func_resolve_sysroot_result" ;; - esac - - # Collect preopened libtool deplibs, except any this library - # has declared as weak libs - for deplib in $dependency_libs; do - func_basename "$deplib" - deplib_base=$func_basename_result - case " $weak_libs " in - *" $deplib_base "*) ;; - *) func_append deplibs " $deplib" ;; - esac - done - done - libs=$dlprefiles - fi - if test dlopen = "$pass"; then - # Collect dlpreopened libraries - save_deplibs=$deplibs - deplibs= - fi - - for deplib in $libs; do - lib= - found=false - case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - func_append compiler_flags " $deplib" - if test lib = "$linkmode"; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; - esac - fi - fi - continue - ;; - -l*) - if test lib != "$linkmode" && test prog != "$linkmode"; then - func_warning "'-l' is ignored for archives/objects" - continue - fi - func_stripname '-l' '' "$deplib" - name=$func_stripname_result - if test lib = "$linkmode"; then - searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" - else - searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" - fi - for searchdir in $searchdirs; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib=$searchdir/lib$name$search_ext - if test -f "$lib"; then - if test .la = "$search_ext"; then - found=: - else - found=false - fi - break 2 - fi - done - done - if $found; then - # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test yes = "$allow_libtool_libs_with_static_runtimes"; then - case " $predeps $postdeps " in - *" $deplib "*) - if func_lalib_p "$lib"; then - library_names= - old_library= - func_source "$lib" - for l in $old_library $library_names; do - ll=$l - done - if test "X$ll" = "X$old_library"; then # only static version available - found=false - func_dirname "$lib" "" "." - ladir=$func_dirname_result - lib=$ladir/$old_library - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi - else - # deplib doesn't seem to be a libtool library - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - ;; # -l - *.ltframework) - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - if test lib = "$linkmode"; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; - esac - fi - fi - continue - ;; - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test conv = "$pass" && continue - newdependency_libs="$deplib $newdependency_libs" - func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - prog) - if test conv = "$pass"; then - deplibs="$deplib $deplibs" - continue - fi - if test scan = "$pass"; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - *) - func_warning "'-L' is ignored for archives/objects" - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test link = "$pass"; then - func_stripname '-R' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) func_append xrpath " $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) - func_resolve_sysroot "$deplib" - lib=$func_resolve_sysroot_result - ;; - *.$libext) - if test conv = "$pass"; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - # Linking convenience modules into shared libraries is allowed, - # but linking other static libraries is non-portable. - case " $dlpreconveniencelibs " in - *" $deplib "*) ;; - *) - valid_a_lib=false - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=: - fi - ;; - pass_all) - valid_a_lib=: - ;; - esac - if $valid_a_lib; then - echo - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - else - echo - $ECHO "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not use here." - fi - ;; - esac - continue - ;; - prog) - if test link != "$pass"; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test conv = "$pass"; then - deplibs="$deplib $deplibs" - elif test prog = "$linkmode"; then - if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - func_append newdlprefiles " $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - func_append newdlfiles " $deplib" - fi - fi - continue - ;; - %DEPLIBS%) - alldeplibs=: - continue - ;; - esac # case $deplib - - $found || test -f "$lib" \ - || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'" - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$lib" \ - || func_fatal_error "'$lib' is not a valid libtool archive" - - func_dirname "$lib" "" "." - ladir=$func_dirname_result - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - inherited_linker_flags= - # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink - installed=yes - shouldnotlink=no - avoidtemprpath= - - - # Read the .la file - func_source "$lib" - - # Convert "-framework foo" to "foo.ltframework" - if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` - for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do - case " $new_inherited_linker_flags " in - *" $tmp_inherited_linker_flag "*) ;; - *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; - esac - done - fi - dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - if test lib,link = "$linkmode,$pass" || - test prog,scan = "$linkmode,$pass" || - { test prog != "$linkmode" && test lib != "$linkmode"; }; then - test -n "$dlopen" && func_append dlfiles " $dlopen" - test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" - fi - - if test conv = "$pass"; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for '$lib'" - fi - # It is a libtool convenience library, so add in its objects. - func_append convenience " $ladir/$objdir/$old_library" - func_append old_convenience " $ladir/$objdir/$old_library" - elif test prog != "$linkmode" && test lib != "$linkmode"; then - func_fatal_error "'$lib' is not a convenience library" - fi - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps; then - case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append tmp_libs " $deplib" - done - continue - fi # $pass = conv - - - # Get the name of the library we link against. - linklib= - if test -n "$old_library" && - { test yes = "$prefer_static_libs" || - test built,no = "$prefer_static_libs,$installed"; }; then - linklib=$old_library - else - for l in $old_library $library_names; do - linklib=$l - done - fi - if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for '$lib'" - fi - - # This library was specified with -dlopen. - if test dlopen = "$pass"; then - test -z "$libdir" \ - && func_fatal_error "cannot -dlopen a convenience library: '$lib'" - if test -z "$dlname" || - test yes != "$dlopen_support" || - test no = "$build_libtool_libs" - then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - func_append dlprefiles " $lib $dependency_libs" - else - func_append newdlfiles " $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of '$ladir'" - func_warning "passing it literally to the linker, although it might fail" - abs_ladir=$ladir - fi - ;; - esac - func_basename "$lib" - laname=$func_basename_result - - # Find the relevant object directory and library name. - if test yes = "$installed"; then - if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library '$lib' was moved." - dir=$ladir - absdir=$abs_ladir - libdir=$abs_ladir - else - dir=$lt_sysroot$libdir - absdir=$lt_sysroot$libdir - fi - test yes = "$hardcode_automatic" && avoidtemprpath=yes - else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir=$ladir - absdir=$abs_ladir - # Remove this search path later - func_append notinst_path " $abs_ladir" - else - dir=$ladir/$objdir - absdir=$abs_ladir/$objdir - # Remove this search path later - func_append notinst_path " $abs_ladir" - fi - fi # $installed = yes - func_stripname 'lib' '.la' "$laname" - name=$func_stripname_result - - # This library was specified with -dlpreopen. - if test dlpreopen = "$pass"; then - if test -z "$libdir" && test prog = "$linkmode"; then - func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'" - fi - case $host in - # special handling for platforms with PE-DLLs. - *cygwin* | *mingw* | *cegcc* ) - # Linker will automatically link against shared library if both - # static and shared are present. Therefore, ensure we extract - # symbols from the import library if a shared library is present - # (otherwise, the dlopen module name will be incorrect). We do - # this by putting the import library name into $newdlprefiles. - # We recover the dlopen module name by 'saving' the la file - # name in a special purpose variable, and (later) extracting the - # dlname from the la file. - if test -n "$dlname"; then - func_tr_sh "$dir/$linklib" - eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" - func_append newdlprefiles " $dir/$linklib" - else - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - fi - ;; - * ) - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - func_append newdlprefiles " $dir/$dlname" - else - func_append newdlprefiles " $dir/$linklib" - fi - ;; - esac - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test lib = "$linkmode"; then - deplibs="$dir/$old_library $deplibs" - elif test prog,link = "$linkmode,$pass"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi - - - if test prog = "$linkmode" && test link != "$pass"; then - func_append newlib_search_path " $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=false - if test no != "$link_all_deplibs" || test -z "$library_names" || - test no = "$build_libtool_libs"; then - linkalldeplibs=: - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - esac - # Need to link against all dependency_libs? - if $linkalldeplibs; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if $opt_preserve_dup_deps; then - case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append tmp_libs " $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - if test prog,link = "$linkmode,$pass"; then - if test -n "$library_names" && - { { test no = "$prefer_static_libs" || - test built,yes = "$prefer_static_libs,$installed"; } || - test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then - # Make sure the rpath contains only unique directories. - case $temp_rpath: in - *"$absdir:"*) ;; - *) func_append temp_rpath "$absdir:" ;; - esac - fi - - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - - if $alldeplibs && - { test pass_all = "$deplibs_check_method" || - { test yes = "$build_libtool_libs" && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi - - link_static=no # Whether the deplib will be linked statically - use_static_libs=$prefer_static_libs - if test built = "$use_static_libs" && test yes = "$installed"; then - use_static_libs=no - fi - if test -n "$library_names" && - { test no = "$use_static_libs" || test -z "$old_library"; }; then - case $host in - *cygwin* | *mingw* | *cegcc* | *os2*) - # No point in relinking DLLs because paths are not encoded - func_append notinst_deplibs " $lib" - need_relink=no - ;; - *) - if test no = "$installed"; then - func_append notinst_deplibs " $lib" - need_relink=yes - fi - ;; - esac - # This is a shared library - - # Warn about portability, can't link against -module's on some - # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule= - for dlpremoduletest in $dlprefiles; do - if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule=$dlpremoduletest - break - fi - done - if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then - echo - if test prog = "$linkmode"; then - $ECHO "*** Warning: Linking the executable $output against the loadable module" - else - $ECHO "*** Warning: Linking the shared library $output against the loadable module" - fi - $ECHO "*** $linklib is not portable!" - fi - if test lib = "$linkmode" && - test yes = "$hardcode_into_libs"; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - ;; - esac - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - shift - realname=$1 - shift - libname=`eval "\\$ECHO \"$libname_spec\""` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname=$dlname - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin* | mingw* | *cegcc* | *os2*) - func_arith $current - $age - major=$func_arith_result - versuffix=-$major - ;; - esac - eval soname=\"$soname_spec\" - else - soname=$realname - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot=$soname - func_basename "$soroot" - soname=$func_basename_result - func_stripname 'lib' '.dll' "$soname" - newlib=libimp-$func_stripname_result.a - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - func_verbose "extracting exported symbol list from '$soname'" - func_execute_cmds "$extract_expsyms_cmds" 'exit $?' - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for '$soname'" - func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test prog = "$linkmode" || test relink != "$opt_mode"; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test no = "$hardcode_direct"; then - add=$dir/$linklib - case $host in - *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; - *-*-sysv4*uw2*) add_dir=-L$dir ;; - *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir=-L$dir ;; - *-*-darwin* ) - # if the lib is a (non-dlopened) module then we cannot - # link against it, someone is ignoring the earlier warnings - if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null; then - if test "X$dlopenmodule" != "X$lib"; then - $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library"; then - echo - echo "*** And there doesn't seem to be a static archive available" - echo "*** The link will probably fail, sorry" - else - add=$dir/$old_library - fi - elif test -n "$old_library"; then - add=$dir/$old_library - fi - fi - esac - elif test no = "$hardcode_minus_L"; then - case $host in - *-*-sunos*) add_shlibpath=$dir ;; - esac - add_dir=-L$dir - add=-l$name - elif test no = "$hardcode_shlibpath_var"; then - add_shlibpath=$dir - add=-l$name - else - lib_linked=no - fi - ;; - relink) - if test yes = "$hardcode_direct" && - test no = "$hardcode_direct_absolute"; then - add=$dir/$linklib - elif test yes = "$hardcode_minus_L"; then - add_dir=-L$absdir - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" - ;; - esac - fi - add=-l$name - elif test yes = "$hardcode_shlibpath_var"; then - add_shlibpath=$dir - add=-l$name - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test yes != "$lib_linked"; then - func_fatal_configuration "unsupported hardcode properties" - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) func_append compile_shlibpath "$add_shlibpath:" ;; - esac - fi - if test prog = "$linkmode"; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test yes != "$hardcode_direct" && - test yes != "$hardcode_minus_L" && - test yes = "$hardcode_shlibpath_var"; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; - esac - fi - fi - fi - - if test prog = "$linkmode" || test relink = "$opt_mode"; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test yes = "$hardcode_direct" && - test no = "$hardcode_direct_absolute"; then - add=$libdir/$linklib - elif test yes = "$hardcode_minus_L"; then - add_dir=-L$libdir - add=-l$name - elif test yes = "$hardcode_shlibpath_var"; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; - esac - add=-l$name - elif test yes = "$hardcode_automatic"; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib"; then - add=$inst_prefix_dir$libdir/$linklib - else - add=$libdir/$linklib - fi - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir=-L$libdir - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" - ;; - esac - fi - add=-l$name - fi - - if test prog = "$linkmode"; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test prog = "$linkmode"; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test unsupported != "$hardcode_direct"; then - test -n "$old_library" && linklib=$old_library - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test yes = "$build_libtool_libs"; then - # Not a shared library - if test pass_all != "$deplibs_check_method"; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - echo - $ECHO "*** Warning: This system cannot link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - if test yes = "$module"; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using 'nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** 'nm' from GNU binutils and a full rebuild may help." - fi - if test no = "$build_old_libs"; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test lib = "$linkmode"; then - if test -n "$dependency_libs" && - { test yes != "$hardcode_into_libs" || - test yes = "$build_old_libs" || - test yes = "$link_static"; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) func_stripname '-R' '' "$libdir" - temp_xrpath=$func_stripname_result - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) func_append xrpath " $temp_xrpath";; - esac;; - *) func_append temp_deplibs " $libdir";; - esac - done - dependency_libs=$temp_deplibs - fi - - func_append newlib_search_path " $absdir" - # Link against this library - test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result";; - *) func_resolve_sysroot "$deplib" ;; - esac - if $opt_preserve_dup_deps; then - case "$tmp_libs " in - *" $func_resolve_sysroot_result "*) - func_append specialdeplibs " $func_resolve_sysroot_result" ;; - esac - fi - func_append tmp_libs " $func_resolve_sysroot_result" - done - - if test no != "$link_all_deplibs"; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - path= - case $deplib in - -L*) path=$deplib ;; - *.la) - func_resolve_sysroot "$deplib" - deplib=$func_resolve_sysroot_result - func_dirname "$deplib" "" "." - dir=$func_dirname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of '$dir'" - absdir=$dir - fi - ;; - esac - if $GREP "^installed=no" $deplib > /dev/null; then - case $host in - *-*-darwin*) - depdepl= - eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names"; then - for tmp in $deplibrary_names; do - depdepl=$tmp - done - if test -f "$absdir/$objdir/$depdepl"; then - depdepl=$absdir/$objdir/$depdepl - darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - if test -z "$darwin_install_name"; then - darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - fi - func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl" - func_append linker_flags " -dylib_file $darwin_install_name:$depdepl" - path= - fi - fi - ;; - *) - path=-L$absdir/$objdir - ;; - esac - else - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "'$deplib' is not a valid libtool archive" - test "$absdir" != "$libdir" && \ - func_warning "'$deplib' seems to be moved" - - path=-L$absdir - fi - ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$path $deplibs" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - if test link = "$pass"; then - if test prog = "$linkmode"; then - compile_deplibs="$new_inherited_linker_flags $compile_deplibs" - finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" - else - compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - fi - fi - dependency_libs=$newdependency_libs - if test dlpreopen = "$pass"; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test dlopen != "$pass"; then - test conv = "$pass" || { - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) func_append lib_search_path " $dir" ;; - esac - done - newlib_search_path= - } - - if test prog,link = "$linkmode,$pass"; then - vars="compile_deplibs finalize_deplibs" - else - vars=deplibs - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) func_append tmp_libs " $deplib" ;; - esac - ;; - *) func_append tmp_libs " $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - - # Add Sun CC postdeps if required: - test CXX = "$tagname" && { - case $host_os in - linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C++ 5.9 - func_suncc_cstd_abi - - if test no != "$suncc_use_cstd_abi"; then - func_append postdeps ' -library=Cstd -library=Crun' - fi - ;; - esac - ;; - - solaris*) - func_cc_basename "$CC" - case $func_cc_basename_result in - CC* | sunCC*) - func_suncc_cstd_abi - - if test no != "$suncc_use_cstd_abi"; then - func_append postdeps ' -library=Cstd -library=Crun' - fi - ;; - esac - ;; - esac - } - - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i= - ;; - esac - if test -n "$i"; then - func_append tmp_libs " $i" - fi - done - dependency_libs=$tmp_libs - done # for pass - if test prog = "$linkmode"; then - dlfiles=$newdlfiles - fi - if test prog = "$linkmode" || test lib = "$linkmode"; then - dlprefiles=$newdlprefiles - fi - - case $linkmode in - oldlib) - if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then - func_warning "'-dlopen' is ignored for archives" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "'-l' and '-L' are ignored for archives" ;; - esac - - test -n "$rpath" && \ - func_warning "'-rpath' is ignored for archives" - - test -n "$xrpath" && \ - func_warning "'-R' is ignored for archives" - - test -n "$vinfo" && \ - func_warning "'-version-info/-version-number' is ignored for archives" - - test -n "$release" && \ - func_warning "'-release' is ignored for archives" - - test -n "$export_symbols$export_symbols_regex" && \ - func_warning "'-export-symbols' is ignored for archives" - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs=$output - func_append objs "$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form 'libNAME.la'. - case $outputname in - lib*) - func_stripname 'lib' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - ;; - *) - test no = "$module" \ - && func_fatal_help "libtool library '$output' must begin with 'lib'" - - if test no != "$need_lib_prefix"; then - # Add the "lib" prefix for modules if required - func_stripname '' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - else - func_stripname '' '.la' "$outputname" - libname=$func_stripname_result - fi - ;; - esac - - if test -n "$objs"; then - if test pass_all != "$deplibs_check_method"; then - func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" - else - echo - $ECHO "*** Warning: Linking the shared library $output against the non-libtool" - $ECHO "*** objects $objs is not portable!" - func_append libobjs " $objs" - fi - fi - - test no = "$dlself" \ - || func_warning "'-dlopen self' is ignored for libtool libraries" - - set dummy $rpath - shift - test 1 -lt "$#" \ - && func_warning "ignoring multiple '-rpath's for a libtool library" - - install_libdir=$1 - - oldlibs= - if test -z "$rpath"; then - if test yes = "$build_libtool_libs"; then - # Building a libtool convenience library. - # Some compilers have problems with a '.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - test -n "$vinfo" && \ - func_warning "'-version-info/-version-number' is ignored for convenience libraries" - - test -n "$release" && \ - func_warning "'-release' is ignored for convenience libraries" - else - - # Parse the version information argument. - save_ifs=$IFS; IFS=: - set dummy $vinfo 0 0 0 - shift - IFS=$save_ifs - - test -n "$7" && \ - func_fatal_help "too many parameters to '-version-info'" - - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible - - case $vinfo_number in - yes) - number_major=$1 - number_minor=$2 - number_revision=$3 - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # that has an extra 1 added just for fun - # - case $version_type in - # correct linux to gnu/linux during the next big refactor - darwin|freebsd-elf|linux|osf|windows|none) - func_arith $number_major + $number_minor - current=$func_arith_result - age=$number_minor - revision=$number_revision - ;; - freebsd-aout|qnx|sunos) - current=$number_major - revision=$number_minor - age=0 - ;; - irix|nonstopux) - func_arith $number_major + $number_minor - current=$func_arith_result - age=$number_minor - revision=$number_minor - lt_irix_increment=no - ;; - esac - ;; - no) - current=$1 - revision=$2 - age=$3 - ;; - esac - - # Check that each of the things are valid numbers. - case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "CURRENT '$current' must be a nonnegative integer" - func_fatal_error "'$vinfo' is not valid version information" - ;; - esac - - case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "REVISION '$revision' must be a nonnegative integer" - func_fatal_error "'$vinfo' is not valid version information" - ;; - esac - - case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "AGE '$age' must be a nonnegative integer" - func_fatal_error "'$vinfo' is not valid version information" - ;; - esac - - if test "$age" -gt "$current"; then - func_error "AGE '$age' is greater than the current interface number '$current'" - func_fatal_error "'$vinfo' is not valid version information" - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - func_arith $current - $age - major=.$func_arith_result - versuffix=$major.$age.$revision - # Darwin ld doesn't like 0 for these options... - func_arith $current + 1 - minor_current=$func_arith_result - xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - # On Darwin other compilers - case $CC in - nagfor*) - verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" - ;; - *) - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - esac - ;; - - freebsd-aout) - major=.$current - versuffix=.$current.$revision - ;; - - freebsd-elf) - func_arith $current - $age - major=.$func_arith_result - versuffix=$major.$age.$revision - ;; - - irix | nonstopux) - if test no = "$lt_irix_increment"; then - func_arith $current - $age - else - func_arith $current - $age + 1 - fi - major=$func_arith_result - - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring=$verstring_prefix$major.$revision - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test 0 -ne "$loop"; do - func_arith $revision - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring=$verstring_prefix$major.$iface:$verstring - done - - # Before this point, $major must not contain '.'. - major=.$major - versuffix=$major.$revision - ;; - - linux) # correct to gnu/linux during the next big refactor - func_arith $current - $age - major=.$func_arith_result - versuffix=$major.$age.$revision - ;; - - osf) - func_arith $current - $age - major=.$func_arith_result - versuffix=.$current.$age.$revision - verstring=$current.$age.$revision - - # Add in all the interfaces that we are compatible with. - loop=$age - while test 0 -ne "$loop"; do - func_arith $current - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring=$verstring:$iface.0 - done - - # Make executables depend on our current version. - func_append verstring ":$current.0" - ;; - - qnx) - major=.$current - versuffix=.$current - ;; - - sco) - major=.$current - versuffix=.$current - ;; - - sunos) - major=.$current - versuffix=.$current.$revision - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 file systems. - func_arith $current - $age - major=$func_arith_result - versuffix=-$major - ;; - - *) - func_fatal_configuration "unknown library version type '$version_type'" - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring=0.0 - ;; - esac - if test no = "$need_version"; then - versuffix= - else - versuffix=.0.0 - fi - fi - - # Remove version info from name if versioning should be avoided - if test yes,no = "$avoid_version,$need_version"; then - major= - versuffix= - verstring= - fi - - # Check to see if the archive will have undefined symbols. - if test yes = "$allow_undefined"; then - if test unsupported = "$allow_undefined_flag"; then - if test yes = "$build_old_libs"; then - func_warning "undefined symbols not allowed in $host shared libraries; building static only" - build_libtool_libs=no - else - func_fatal_error "can't build $host shared library unless -no-undefined is specified" - fi - fi - else - # Don't allow undefined symbols. - allow_undefined_flag=$no_undefined_flag - fi - - fi - - func_generate_dlsyms "$libname" "$libname" : - func_append libobjs " $symfileobj" - test " " = "$libobjs" && libobjs= - - if test relink != "$opt_mode"; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$ECHO "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext | *.gcno) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*) - if test -n "$precious_files_regex"; then - if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - func_append removelist " $p" - ;; - *) ;; - esac - done - test -n "$removelist" && \ - func_show_eval "${RM}r \$removelist" - fi - - # Now set the variables for building old libraries. - if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then - func_append oldlibs " $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - #for path in $notinst_path; do - # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` - # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` - # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` - #done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - func_replace_sysroot "$libdir" - func_append temp_xrpath " -R$func_replace_sysroot_result" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - done - if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles=$dlfiles - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) func_append dlfiles " $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles=$dlprefiles - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) func_append dlprefiles " $lib" ;; - esac - done - - if test yes = "$build_libtool_libs"; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - func_append deplibs " System.ltframework" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test yes = "$build_libtool_need_lc"; then - func_append deplibs " -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release= - versuffix= - major= - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $opt_dry_run || $RM conftest.c - cat > conftest.c </dev/null` - $nocaseglob - else - potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` - fi - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null | - $GREP " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib=$potent_lib - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | $SED 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;; - *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | - $SED -e 10q | - $EGREP "$file_magic_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" - a_deplib= - break 2 - fi - done - done - fi - if test -n "$a_deplib"; then - droppeddeps=yes - echo - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib"; then - $ECHO "*** with $libname but no candidates were found. (...for file magic test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a file magic. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - func_append newdeplibs " $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result - if test yes = "$allow_libtool_libs_with_static_runtimes"; then - case " $predeps $postdeps " in - *" $a_deplib "*) - func_append newdeplibs " $a_deplib" - a_deplib= - ;; - esac - fi - if test -n "$a_deplib"; then - libname=`eval "\\$ECHO \"$libname_spec\""` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib=$potent_lib # see symlink-check above in file_magic test - if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ - $EGREP "$match_pattern_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" - a_deplib= - break 2 - fi - done - done - fi - if test -n "$a_deplib"; then - droppeddeps=yes - echo - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib"; then - $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a regex pattern. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - func_append newdeplibs " $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs= - tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` - if test yes = "$allow_libtool_libs_with_static_runtimes"; then - for i in $predeps $postdeps; do - # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"` - done - fi - case $tmp_deplibs in - *[!\ \ ]*) - echo - if test none = "$deplibs_check_method"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." - else - echo "*** Warning: inter-library dependencies are not known to be supported." - fi - echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - ;; - esac - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac - - if test yes = "$droppeddeps"; then - if test yes = "$module"; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using 'nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** 'nm' from GNU binutils and a full rebuild may help." - fi - if test no = "$build_old_libs"; then - oldlibs=$output_objdir/$libname.$libext - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - - if test no = "$allow_undefined"; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." - if test no = "$build_old_libs"; then - oldlibs=$output_objdir/$libname.$libext - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - case $host in - *-*-darwin*) - newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $deplibs " in - *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; - esac - ;; - *) func_append new_libs " $deplib" ;; - esac - done - deplibs=$new_libs - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test yes = "$build_libtool_libs"; then - # Remove $wl instances when linking with ld. - # FIXME: should test the right _cmds variable. - case $archive_cmds in - *\$LD\ *) wl= ;; - esac - if test yes = "$hardcode_into_libs"; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath=$finalize_rpath - test relink = "$opt_mode" || rpath=$compile_rpath$rpath - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - func_replace_sysroot "$libdir" - libdir=$func_replace_sysroot_result - if test -z "$hardcode_libdirs"; then - hardcode_libdirs=$libdir - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append dep_rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir=$hardcode_libdirs - eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - func_append rpath "$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath=$finalize_shlibpath - test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" - eval library_names=\"$library_names_spec\" - set dummy $library_names - shift - realname=$1 - shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname=$realname - fi - if test -z "$dlname"; then - dlname=$soname - fi - - lib=$output_objdir/$realname - linknames= - for link - do - func_append linknames " $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` - test "X$libobjs" = "X " && libobjs= - - delfiles= - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols=$output_objdir/$libname.uexp - func_append delfiles " $export_symbols" - fi - - orig_export_symbols= - case $host_os in - cygwin* | mingw* | cegcc*) - if test -n "$export_symbols" && test -z "$export_symbols_regex"; then - # exporting using user supplied symfile - func_dll_def_p "$export_symbols" || { - # and it's NOT already a .def file. Must figure out - # which of the given symbols are data symbols and tag - # them as such. So, trigger use of export_symbols_cmds. - # export_symbols gets reassigned inside the "prepare - # the list of exported symbols" if statement, so the - # include_expsyms logic still works. - orig_export_symbols=$export_symbols - export_symbols= - always_export_symbols=yes - } - fi - ;; - esac - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for '$libname.la'" - export_symbols=$output_objdir/$libname.exp - $opt_dry_run || $RM $export_symbols - cmds=$export_symbols_cmds - save_ifs=$IFS; IFS='~' - for cmd1 in $cmds; do - IFS=$save_ifs - # Take the normal branch if the nm_file_list_spec branch - # doesn't work or if tool conversion is not needed. - case $nm_file_list_spec~$to_tool_file_cmd in - *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) - try_normal_branch=yes - eval cmd=\"$cmd1\" - func_len " $cmd" - len=$func_len_result - ;; - *) - try_normal_branch=no - ;; - esac - if test yes = "$try_normal_branch" \ - && { test "$len" -lt "$max_cmd_len" \ - || test "$max_cmd_len" -le -1; } - then - func_show_eval "$cmd" 'exit $?' - skipped_export=false - elif test -n "$nm_file_list_spec"; then - func_basename "$output" - output_la=$func_basename_result - save_libobjs=$libobjs - save_output=$output - output=$output_objdir/$output_la.nm - func_to_tool_file "$output" - libobjs=$nm_file_list_spec$func_to_tool_file_result - func_append delfiles " $output" - func_verbose "creating $NM input file list: $output" - for obj in $save_libobjs; do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > "$output" - eval cmd=\"$cmd1\" - func_show_eval "$cmd" 'exit $?' - output=$save_output - libobjs=$save_libobjs - skipped_export=false - else - # The command line is too long to execute in one step. - func_verbose "using reloadable object file for export list..." - skipped_export=: - # Break out early, otherwise skipped_export may be - # set to false by a later but shorter cmd. - break - fi - done - IFS=$save_ifs - if test -n "$export_symbols_regex" && test : != "$skipped_export"; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols=$export_symbols - test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' - fi - - if test : != "$skipped_export" && test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for '$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands, which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - func_append tmp_deplibs " $test_deplib" - ;; - esac - done - deplibs=$tmp_deplibs - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec" && - test yes = "$compiler_needs_object" && - test -z "$libobjs"; then - # extract the archives, so we have objects to list. - # TODO: could optimize this to just extract one archive. - whole_archive_flag_spec= - fi - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - else - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $convenience - func_append libobjs " $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - fi - - if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - func_append linker_flags " $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test relink = "$opt_mode"; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? - fi - - # Do each of the archive commands. - if test yes = "$module" && test -n "$module_cmds"; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi - fi - - if test : != "$skipped_export" && - func_len " $test_cmds" && - len=$func_len_result && - test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise - # or, if using GNU ld and skipped_export is not :, use a linker - # script. - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - func_basename "$output" - output_la=$func_basename_result - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - last_robj= - k=1 - - if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then - output=$output_objdir/$output_la.lnkscript - func_verbose "creating GNU ld script: $output" - echo 'INPUT (' > $output - for obj in $save_libobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output - done - echo ')' >> $output - func_append delfiles " $output" - func_to_tool_file "$output" - output=$func_to_tool_file_result - elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then - output=$output_objdir/$output_la.lnk - func_verbose "creating linker input file list: $output" - : > $output - set x $save_libobjs - shift - firstobj= - if test yes = "$compiler_needs_object"; then - firstobj="$1 " - shift - fi - for obj - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output - done - func_append delfiles " $output" - func_to_tool_file "$output" - output=$firstobj\"$file_list_spec$func_to_tool_file_result\" - else - if test -n "$save_libobjs"; then - func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-$k.$objext - eval test_cmds=\"$reload_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - if test -z "$objlist" || - test "$len" -lt "$max_cmd_len"; then - func_append objlist " $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test 1 -eq "$k"; then - # The first file doesn't have a previous command to add. - reload_objs=$objlist - eval concat_cmds=\"$reload_cmds\" - else - # All subsequent reloadable object files will link in - # the last one created. - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" - fi - last_robj=$output_objdir/$output_la-$k.$objext - func_arith $k + 1 - k=$func_arith_result - output=$output_objdir/$output_la-$k.$objext - objlist=" $obj" - func_len " $last_robj" - func_arith $len0 + $func_len_result - len=$func_arith_result - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\$concat_cmds$reload_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi - func_append delfiles " $output" - - else - output= - fi - - ${skipped_export-false} && { - func_verbose "generating symbol list for '$libname.la'" - export_symbols=$output_objdir/$libname.exp - $opt_dry_run || $RM $export_symbols - libobjs=$output - # Append the command to create the export file. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi - } - - test -n "$save_libobjs" && - func_verbose "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs=$IFS; IFS='~' - for cmd in $concat_cmds; do - IFS=$save_ifs - $opt_quiet || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test relink = "$opt_mode"; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS=$save_ifs - - if test -n "$export_symbols_regex" && ${skipped_export-false}; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - - ${skipped_export-false} && { - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols=$export_symbols - test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' - fi - - if test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for '$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands, which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - } - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test yes = "$module" && test -n "$module_cmds"; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi - fi - - if test -n "$delfiles"; then - # Append the command to remove temporary files to $cmds. - eval cmds=\"\$cmds~\$RM $delfiles\" - fi - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $dlprefiles - func_append libobjs " $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - - save_ifs=$IFS; IFS='~' - for cmd in $cmds; do - IFS=$sp$nl - eval cmd=\"$cmd\" - IFS=$save_ifs - $opt_quiet || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test relink = "$opt_mode"; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS=$save_ifs - - # Restore the uninstalled library and exit - if test relink = "$opt_mode"; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? - - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - func_show_eval '${RM}r "$gentop"' - fi - fi - - exit $EXIT_SUCCESS - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test yes = "$module" || test yes = "$export_dynamic"; then - # On all known operating systems, these are identical. - dlname=$soname - fi - fi - ;; - - obj) - if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then - func_warning "'-dlopen' is ignored for objects" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "'-l' and '-L' are ignored for objects" ;; - esac - - test -n "$rpath" && \ - func_warning "'-rpath' is ignored for objects" - - test -n "$xrpath" && \ - func_warning "'-R' is ignored for objects" - - test -n "$vinfo" && \ - func_warning "'-version-info' is ignored for objects" - - test -n "$release" && \ - func_warning "'-release' is ignored for objects" - - case $output in - *.lo) - test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object '$output' from non-libtool objects" - - libobj=$output - func_lo2o "$libobj" - obj=$func_lo2o_result - ;; - *) - libobj= - obj=$output - ;; - esac - - # Delete the old objects. - $opt_dry_run || $RM $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # if reload_cmds runs $LD directly, get rid of -Wl from - # whole_archive_flag_spec and hope we can get by with turning comma - # into space. - case $reload_cmds in - *\$LD[\ \$]*) wl= ;; - esac - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` - reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags - else - gentop=$output_objdir/${obj}x - func_append generated " $gentop" - - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" - fi - fi - - # If we're not building shared, we need to use non_pic_objs - test yes = "$build_libtool_libs" || libobjs=$non_pic_objects - - # Create the old-style object. - reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs - - output=$obj - func_execute_cmds "$reload_cmds" 'exit $?' - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - fi - - test yes = "$build_libtool_libs" || { - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS - } - - if test -n "$pic_flag" || test default != "$pic_mode"; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output=$libobj - func_execute_cmds "$reload_cmds" 'exit $?' - fi - - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - ;; - - prog) - case $host in - *cygwin*) func_stripname '' '.exe' "$output" - output=$func_stripname_result.exe;; - esac - test -n "$vinfo" && \ - func_warning "'-version-info' is ignored for programs" - - test -n "$release" && \ - func_warning "'-release' is ignored for programs" - - $preload \ - && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \ - && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support." - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac - - case $host in - *-*-darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - # But is supposedly fixed on 10.4 or later (yay!). - if test CXX = "$tagname"; then - case ${MACOSX_DEPLOYMENT_TARGET-10.0} in - 10.[0123]) - func_append compile_command " $wl-bind_at_load" - func_append finalize_command " $wl-bind_at_load" - ;; - esac - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $compile_deplibs " in - *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $compile_deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; - esac - ;; - *) func_append new_libs " $deplib" ;; - esac - done - compile_deplibs=$new_libs - - - func_append compile_command " $compile_deplibs" - func_append finalize_command " $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs=$libdir - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$libdir:"*) ;; - ::) dllsearchpath=$libdir;; - *) func_append dllsearchpath ":$libdir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir=$hardcode_libdirs - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath=$rpath - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs=$libdir - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) func_append finalize_perm_rpath " $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir=$hardcode_libdirs - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath=$rpath - - if test -n "$libobjs" && test yes = "$build_old_libs"; then - # Transform all the library objects into standard objects. - compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - fi - - func_generate_dlsyms "$outputname" "@PROGRAM@" false - - # template prelinking step - if test -n "$prelink_cmds"; then - func_execute_cmds "$prelink_cmds" 'exit $?' - fi - - wrappers_required=: - case $host in - *cegcc* | *mingw32ce*) - # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. - wrappers_required=false - ;; - *cygwin* | *mingw* ) - test yes = "$build_libtool_libs" || wrappers_required=false - ;; - *) - if test no = "$need_relink" || test yes != "$build_libtool_libs"; then - wrappers_required=false - fi - ;; - esac - $wrappers_required || { - # Replace the output file specification. - compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - link_command=$compile_command$compile_rpath - - # We have no uninstalled library dependencies, so finalize right now. - exit_status=0 - func_show_eval "$link_command" 'exit_status=$?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - # Delete the generated files. - if test -f "$output_objdir/${outputname}S.$objext"; then - func_show_eval '$RM "$output_objdir/${outputname}S.$objext"' - fi - - exit $exit_status - } - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - func_append rpath "$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - func_append rpath "$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test yes = "$no_install"; then - # We don't need to create a wrapper script. - link_command=$compile_var$compile_command$compile_rpath - # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $opt_dry_run || $RM $output - # Link the executable and exit - func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - exit $EXIT_SUCCESS - fi - - case $hardcode_action,$fast_install in - relink,*) - # Fast installation is not supported - link_command=$compile_var$compile_command$compile_rpath - relink_command=$finalize_var$finalize_command$finalize_rpath - - func_warning "this platform does not like uninstalled shared libraries" - func_warning "'$output' will be relinked during installation" - ;; - *,yes) - link_command=$finalize_var$compile_command$finalize_rpath - relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` - ;; - *,no) - link_command=$compile_var$compile_command$compile_rpath - relink_command=$finalize_var$finalize_command$finalize_rpath - ;; - *,needless) - link_command=$finalize_var$compile_command$finalize_rpath - relink_command= - ;; - esac - - # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - - func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output_objdir/$outputname" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - # Now create the wrapper script. - func_verbose "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - fi - - # Only actually do things if not in dry run mode. - $opt_dry_run || { - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) func_stripname '' '.exe' "$output" - output=$func_stripname_result ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) - exeext=.exe - func_stripname '' '.exe' "$outputname" - outputname=$func_stripname_result ;; - *) exeext= ;; - esac - case $host in - *cygwin* | *mingw* ) - func_dirname_and_basename "$output" "" "." - output_name=$func_basename_result - output_path=$func_dirname_result - cwrappersource=$output_path/$objdir/lt-$output_name.c - cwrapper=$output_path/$output_name.exe - $RM $cwrappersource $cwrapper - trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - func_emit_cwrapperexe_src > $cwrappersource - - # The wrapper executable is built using the $host compiler, - # because it contains $host paths and files. If cross- - # compiling, it, like the target executable, must be - # executed on the $host or under an emulation environment. - $opt_dry_run || { - $LTCC $LTCFLAGS -o $cwrapper $cwrappersource - $STRIP $cwrapper - } - - # Now, create the wrapper script for func_source use: - func_ltwrapper_scriptname $cwrapper - $RM $func_ltwrapper_scriptname_result - trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 - $opt_dry_run || { - # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host"; then - $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result - else - func_emit_wrapper no > $func_ltwrapper_scriptname_result - fi - } - ;; - * ) - $RM $output - trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - - func_emit_wrapper no > $output - chmod +x $output - ;; - esac - } - exit $EXIT_SUCCESS - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - case $build_libtool_libs in - convenience) - oldobjs="$libobjs_save $symfileobj" - addlibs=$convenience - build_libtool_libs=no - ;; - module) - oldobjs=$libobjs_save - addlibs=$old_convenience - build_libtool_libs=no - ;; - *) - oldobjs="$old_deplibs $non_pic_objects" - $preload && test -f "$symfileobj" \ - && func_append oldobjs " $symfileobj" - addlibs=$old_convenience - ;; - esac - - if test -n "$addlibs"; then - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $addlibs - func_append oldobjs " $func_extract_archives_result" - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then - cmds=$old_archive_from_new_cmds - else - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $dlprefiles - func_append oldobjs " $func_extract_archives_result" - fi - - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - func_basename "$obj" - $ECHO "$func_basename_result" - done | sort | sort -uc >/dev/null 2>&1); then - : - else - echo "copying selected object files to avoid basename conflicts..." - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - func_mkdir_p "$gentop" - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - func_basename "$obj" - objbase=$func_basename_result - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - func_arith $counter + 1 - counter=$func_arith_result - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - func_append oldobjs " $gentop/$newobj" - ;; - *) func_append oldobjs " $obj" ;; - esac - done - fi - func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 - tool_oldlib=$func_to_tool_file_result - eval cmds=\"$old_archive_cmds\" - - func_len " $cmds" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds - elif test -n "$archiver_list_spec"; then - func_verbose "using command file archive linking..." - for obj in $oldobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > $output_objdir/$libname.libcmd - func_to_tool_file "$output_objdir/$libname.libcmd" - oldobjs=" $archiver_list_spec$func_to_tool_file_result" - cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - func_verbose "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - oldobjs= - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - eval test_cmds=\"$old_archive_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - for obj in $save_oldobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - func_append objlist " $obj" - if test "$len" -lt "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj"; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$old_archive_cmds\" - objlist= - len=$len0 - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test -z "$oldobjs"; then - eval cmds=\"\$concat_cmds\" - else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" - fi - fi - fi - func_execute_cmds "$cmds" 'exit $?' - done - - test -n "$generated" && \ - func_show_eval "${RM}r$generated" - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test yes = "$build_old_libs" && old_library=$libname.$libext - func_verbose "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - if test yes = "$hardcode_automatic"; then - relink_command= - fi - - # Only create the output if not a dry run. - $opt_dry_run || { - for installed in no yes; do - if test yes = "$installed"; then - if test -z "$install_libdir"; then - break - fi - output=$output_objdir/${outputname}i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - func_basename "$deplib" - name=$func_basename_result - func_resolve_sysroot "$deplib" - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` - test -z "$libdir" && \ - func_fatal_error "'$deplib' is not a valid libtool archive" - func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" - ;; - -L*) - func_stripname -L '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -L$func_replace_sysroot_result" - ;; - -R*) - func_stripname -R '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -R$func_replace_sysroot_result" - ;; - *) func_append newdependency_libs " $deplib" ;; - esac - done - dependency_libs=$newdependency_libs - newdlfiles= - - for lib in $dlfiles; do - case $lib in - *.la) - func_basename "$lib" - name=$func_basename_result - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "'$lib' is not a valid libtool archive" - func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" - ;; - *) func_append newdlfiles " $lib" ;; - esac - done - dlfiles=$newdlfiles - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - *.la) - # Only pass preopened files to the pseudo-archive (for - # eventual linking with the app. that links it) if we - # didn't already link the preopened objects directly into - # the library: - func_basename "$lib" - name=$func_basename_result - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "'$lib' is not a valid libtool archive" - func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" - ;; - esac - done - dlprefiles=$newdlprefiles - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; - *) abs=`pwd`"/$lib" ;; - esac - func_append newdlfiles " $abs" - done - dlfiles=$newdlfiles - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; - *) abs=`pwd`"/$lib" ;; - esac - func_append newdlprefiles " $abs" - done - dlprefiles=$newdlprefiles - fi - $RM $output - # place dlname in correct position for cygwin - # In fact, it would be nice if we could use this code for all target - # systems that can't hard-code library paths into their executables - # and that have no shared library path variable independent of PATH, - # but it turns out we can't easily determine that from inspecting - # libtool variables, so we have to hard-code the OSs to which it - # applies here; at the moment, that means platforms that use the PE - # object format with DLL files. See the long comment at the top of - # tests/bindir.at for full details. - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) - # If a -bindir argument was supplied, place the dll there. - if test -n "$bindir"; then - func_relative_path "$install_libdir" "$bindir" - tdlname=$func_relative_path_result/$dlname - else - # Otherwise fall back on heuristic. - tdlname=../bin/$dlname - fi - ;; - esac - $ECHO > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE) $VERSION -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Linker flags that cannot go in dependency_libs. -inherited_linker_flags='$new_inherited_linker_flags' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Names of additional weak libraries provided by this library -weak_library_names='$weak_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Should we warn about portability when linking against -modules? -shouldnotlink=$module - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test no,yes = "$installed,$need_relink"; then - $ECHO >> $output "\ -relink_command=\"$relink_command\"" - fi - done - } - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' - ;; - esac - exit $EXIT_SUCCESS -} - -if test link = "$opt_mode" || test relink = "$opt_mode"; then - func_mode_link ${1+"$@"} -fi - - -# func_mode_uninstall arg... -func_mode_uninstall () -{ - $debug_cmd - - RM=$nonopt - files= - rmforce=false - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic=$magic - - for arg - do - case $arg in - -f) func_append RM " $arg"; rmforce=: ;; - -*) func_append RM " $arg" ;; - *) func_append files " $arg" ;; - esac - done - - test -z "$RM" && \ - func_fatal_help "you must specify an RM program" - - rmdirs= - - for file in $files; do - func_dirname "$file" "" "." - dir=$func_dirname_result - if test . = "$dir"; then - odir=$objdir - else - odir=$dir/$objdir - fi - func_basename "$file" - name=$func_basename_result - test uninstall = "$opt_mode" && odir=$dir - - # Remember odir for removal later, being careful to avoid duplicates - if test clean = "$opt_mode"; then - case " $rmdirs " in - *" $odir "*) ;; - *) func_append rmdirs " $odir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if { test -L "$file"; } >/dev/null 2>&1 || - { test -h "$file"; } >/dev/null 2>&1 || - test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif $rmforce; then - continue - fi - - rmfiles=$file - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if func_lalib_p "$file"; then - func_source $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - func_append rmfiles " $odir/$n" - done - test -n "$old_library" && func_append rmfiles " $odir/$old_library" - - case $opt_mode in - clean) - case " $library_names " in - *" $dlname "*) ;; - *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; - esac - test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" - ;; - uninstall) - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1' - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1' - fi - # FIXME: should reinstall the best remaining shared library. - ;; - esac - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. - if func_lalib_p "$file"; then - - # Read the .lo file - func_source $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" && test none != "$pic_object"; then - func_append rmfiles " $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && test none != "$non_pic_object"; then - func_append rmfiles " $dir/$non_pic_object" - fi - fi - ;; - - *) - if test clean = "$opt_mode"; then - noexename=$name - case $file in - *.exe) - func_stripname '' '.exe' "$file" - file=$func_stripname_result - func_stripname '' '.exe' "$name" - noexename=$func_stripname_result - # $file with .exe has already been added to rmfiles, - # add $file without .exe - func_append rmfiles " $file" - ;; - esac - # Do a test to see if this is a libtool program. - if func_ltwrapper_p "$file"; then - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - relink_command= - func_source $func_ltwrapper_scriptname_result - func_append rmfiles " $func_ltwrapper_scriptname_result" - else - relink_command= - func_source $dir/$noexename - fi - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles - func_append rmfiles " $odir/$name $odir/${name}S.$objext" - if test yes = "$fast_install" && test -n "$relink_command"; then - func_append rmfiles " $odir/lt-$name" - fi - if test "X$noexename" != "X$name"; then - func_append rmfiles " $odir/lt-$noexename.c" - fi - fi - fi - ;; - esac - func_show_eval "$RM $rmfiles" 'exit_status=1' - done - - # Try to remove the $objdir's in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - func_show_eval "rmdir $dir >/dev/null 2>&1" - fi - done - - exit $exit_status -} - -if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then - func_mode_uninstall ${1+"$@"} -fi - -test -z "$opt_mode" && { - help=$generic_help - func_fatal_help "you must specify a MODE" -} - -test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode '$opt_mode'" - -if test -n "$exec_cmd"; then - eval exec "$exec_cmd" - exit $EXIT_FAILURE -fi - -exit $exit_status - - -# The TAGs below are defined such that we never get into a situation -# where we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff -Nru eog-3.26.2/m4/behave-installed-tests.m4 eog-3.27.90/m4/behave-installed-tests.m4 --- eog-3.26.2/m4/behave-installed-tests.m4 2017-06-04 11:10:24.000000000 +0000 +++ eog-3.27.90/m4/behave-installed-tests.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,133 +0,0 @@ -# How to use the installed tests m4 -# -# Place BEHAVE_INSTALLED_TESTS somewhere in configure.ac -# -# Writing your Makefile.am -# ~~~~~~~~~~~~~~~~~~~~~~~~ -# -# Somewhere in your Makefile.am in this test directory, you need to declare -# the following variables: -# -# INSTALLED_TESTS=list of tags for tests to install -# INSTALLED_TESTS_TYPE=session-exclusive -# -# First the list of tests which should be installed, followed by -# the type of test they should be configured as. The type can -# be 'session' or 'session-exclusive' -# -# More information about valid types can be found here: -# https://wiki.gnome.org/GnomeGoals/InstalledTests -# -# The last variable is optional, but can be useful to configure -# your test program to run in the installed environment as opposed -# to the normal `make check' run. -# -# Then place this somewhere in your Makefile.am -# -# @BEHAVE_INSTALLED_TESTS_RULE@ -# -# And the following in configure.ac -# -# BEHAVE_INSTALLED_TESTS -# -# And that's it, now your unit tests will be installed along with -# a .test metadata file into $(pkglibexecdir) if --enable-installed-tests -# is passed to your configure script, and will be run automatically -# by the continuous integration servers. -# -# FIXME: Change the above link to point to real documentation, not -# a gnome goal page which might disappear at some point. -# -# BUGS: This macro hooks into install-exec-am and install-data-am -# which are internals of Automake. This is because Automake doesnt -# consider the regular install-exec-local / install-exec-hook or -# data install components unless variables have been setup for them -# in advance. -# -# This doesnt seem to present a problem, but it is depending on -# internals of Automake instead of clear documented API. - -# Place this in configure.ac to enable -# the installed tests option. - -AC_DEFUN([BEHAVE_INSTALLED_TESTS], [ -AC_PREREQ([2.50])dnl -AC_REQUIRE([AM_NLS])dnl - - AC_PROG_INSTALL - AC_PROG_MKDIR_P - AC_PROG_LIBTOOL - - AC_ARG_ENABLE(installed-tests, - [AC_HELP_STRING([--enable-installed-tests], - [enable installed unit tests [default=no]])],, - [enable_installed_tests="no"]) - - AM_CONDITIONAL([BEHAVE_INSTALLED_TESTS_ENABLED],[test "x$enable_installed_tests" = "xyes"]) - AC_SUBST([BEHAVE_INSTALLED_TESTS_ENABLED], [$enable_installed_tests]) - - # Define the rule for makefiles - BEHAVE_INSTALLED_TESTS_RULE=' - -ifeq ($(BEHAVE_INSTALLED_TESTS_ENABLED),yes) - -install-exec-am: installed-tests-exec-hook -install-data-am: installed-tests-data-hook -uninstall-am: uninstall-tests-hook - -META_DIRECTORY=${DESTDIR}${datadir}/installed-tests/${PACKAGE} -EXEC_DIRECTORY=${DESTDIR}${pkglibexecdir}/installed-tests - -BEHAVE_FEATURES=$(notdir $(wildcard $(srcdir)/tests/*.feature)) -BEHAVE_STEP_DEFINITION=$(notdir $(wildcard $(srcdir)/tests/steps/*.py)) -BEHAVE_COMMON_FILES=environment.py common_steps.py gnome-logo.png - -installed-tests-exec-hook: - @$(MKDIR_P) $(EXEC_DIRECTORY); - @for feature in $(BEHAVE_FEATURES); do \ - $(LIBTOOL) --mode=install $(INSTALL) --mode=777 $(srcdir)/tests/$$feature $(EXEC_DIRECTORY);\ - done - @for common_file in $(BEHAVE_COMMON_FILES); do \ - $(LIBTOOL) --mode=install $(INSTALL) --mode=777 $(srcdir)/tests/$$common_file $(EXEC_DIRECTORY);\ - done - @$(MKDIR_P) $(EXEC_DIRECTORY)/steps; - @for step_definition in $(BEHAVE_STEP_DEFINITION); do \ - $(LIBTOOL) --mode=install $(INSTALL) --mode=777 $(srcdir)/tests/steps/$$step_definition $(EXEC_DIRECTORY)/steps;\ - done - - -installed-tests-data-hook: - @$(MKDIR_P) $(META_DIRECTORY); - @for test in $(INSTALLED_TESTS); do \ - echo "Installing $$test.test to $(META_DIRECTORY)"; \ - echo m4_escape([[Test]]) > $(META_DIRECTORY)/$$test.test; \ - echo "Exec=behave $(pkglibexecdir)/installed-tests -t $$test -k -f html -o $$test.html -f plain" \ - >> $(META_DIRECTORY)/$$test.test; \ - echo "Type=$(INSTALLED_TESTS_TYPE)" >> $(META_DIRECTORY)/$$test.test; \ - done - -uninstall-tests-hook: - @for feature in $(BEHAVE_FEATURES); do\ - echo "Removing feature $(EXEC_DIRECTORY) $$feature";\ - $(LIBTOOL) --mode=uninstall $(RM) $(EXEC_DIRECTORY)/$$feature;\ - done - @for common_file in $(BEHAVE_COMMON_FILES); do\ - echo "Removing feature $(EXEC_DIRECTORY) $$common_file";\ - $(LIBTOOL) --mode=uninstall $(RM) $(EXEC_DIRECTORY)/$$common_file;\ - done - @for step_definition in $(BEHAVE_STEP_DEFINITION); do\ - echo "Removing feature $(EXEC_DIRECTORY)/steps $$step_definition";\ - $(LIBTOOL) --mode=uninstall $(RM) $(EXEC_DIRECTORY)/steps/$$step_definition;\ - done - @for test in $(INSTALLED_TESTS); do\ - $(LIBTOOL) --mode=uninstall $(RM) $(META_DIRECTORY)/$$test.test;\ - done - -endif -' - - # substitute @BEHAVE_INSTALLED_TESTS_RULE@ in Makefiles - AC_SUBST([BEHAVE_INSTALLED_TESTS_RULE]) - m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([BEHAVE_INSTALLED_TESTS_RULE])]) -]) - diff -Nru eog-3.26.2/m4/gettext.m4 eog-3.27.90/m4/gettext.m4 --- eog-3.26.2/m4/gettext.m4 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/m4/gettext.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,405 +0,0 @@ -# gettext.m4 serial 67 (gettext-0.19.6) -dnl Copyright (C) 1995-2014 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2006, 2008-2010. - -dnl Macro to add for using GNU gettext. - -dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). -dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The -dnl default (if it is not specified or empty) is 'no-libtool'. -dnl INTLSYMBOL should be 'external' for packages with no intl directory, -dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. -dnl If INTLSYMBOL is 'use-libtool', then a libtool library -dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, -dnl depending on --{enable,disable}-{shared,static} and on the presence of -dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library -dnl $(top_builddir)/intl/libintl.a will be created. -dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext -dnl implementations (in libc or libintl) without the ngettext() function -dnl will be ignored. If NEEDSYMBOL is specified and is -dnl 'need-formatstring-macros', then GNU gettext implementations that don't -dnl support the ISO C 99 formatstring macros will be ignored. -dnl INTLDIR is used to find the intl libraries. If empty, -dnl the value '$(top_builddir)/intl/' is used. -dnl -dnl The result of the configuration is one of three cases: -dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled -dnl and used. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 2) GNU gettext has been found in the system's C library. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 3) No internationalization, always use English msgid. -dnl Catalog format: none -dnl Catalog extension: none -dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. -dnl The use of .gmo is historical (it was needed to avoid overwriting the -dnl GNU format catalogs when building on a platform with an X/Open gettext), -dnl but we keep it in order not to force irrelevant filename changes on the -dnl maintainers. -dnl -AC_DEFUN([AM_GNU_GETTEXT], -[ - dnl Argument checking. - ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , - [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT -])])])])]) - ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old], - [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])]) - ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , - [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT -])])])]) - define([gt_included_intl], - ifelse([$1], [external], - ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]), - [yes])) - define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], [])) - gt_NEEDS_INIT - AM_GNU_GETTEXT_NEED([$2]) - - AC_REQUIRE([AM_PO_SUBDIRS])dnl - ifelse(gt_included_intl, yes, [ - AC_REQUIRE([AM_INTL_SUBDIR])dnl - ]) - - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Sometimes libintl requires libiconv, so first search for libiconv. - dnl Ideally we would do this search only after the - dnl if test "$USE_NLS" = "yes"; then - dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT - dnl the configure script would need to contain the same shell code - dnl again, outside any 'if'. There are two solutions: - dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. - dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. - dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not - dnl documented, we avoid it. - ifelse(gt_included_intl, yes, , [ - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - ]) - - dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation. - gt_INTL_MACOSX - - dnl Set USE_NLS. - AC_REQUIRE([AM_NLS]) - - ifelse(gt_included_intl, yes, [ - BUILD_INCLUDED_LIBINTL=no - USE_INCLUDED_LIBINTL=no - ]) - LIBINTL= - LTLIBINTL= - POSUB= - - dnl Add a version number to the cache macros. - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - dnl If we use NLS figure out what method - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - ifelse(gt_included_intl, yes, [ - AC_MSG_CHECKING([whether included gettext is requested]) - AC_ARG_WITH([included-gettext], - [ --with-included-gettext use the GNU gettext library included here], - nls_cv_force_use_gnu_gettext=$withval, - nls_cv_force_use_gnu_gettext=no) - AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext]) - - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - ]) - dnl User does not insist on using GNU NLS library. Figure out what - dnl to use. If GNU gettext is available we use this. Else we have - dnl to fall back to GNU NLS library. - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -changequote(,)dnl -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -changequote([,])dnl -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], - [AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings; - ]], - [[ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings - ]])], - [eval "$gt_func_gnugettext_libc=yes"], - [eval "$gt_func_gnugettext_libc=no"])]) - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl Sometimes libintl requires libiconv, so first search for libiconv. - ifelse(gt_included_intl, yes, , [ - AM_ICONV_LINK - ]) - dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL - dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) - dnl because that would add "-liconv" to LIBINTL and LTLIBINTL - dnl even if libiconv doesn't exist. - AC_LIB_LINKFLAGS_BODY([intl]) - AC_CACHE_CHECK([for GNU gettext in libintl], - [$gt_func_gnugettext_libintl], - [gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - dnl Now see whether libintl exists and does not depend on libiconv. - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); - ]], - [[ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") - ]])], - [eval "$gt_func_gnugettext_libintl=yes"], - [eval "$gt_func_gnugettext_libintl=no"]) - dnl Now see whether libintl exists and depends on libiconv. - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); - ]], - [[ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") - ]])], - [LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - eval "$gt_func_gnugettext_libintl=yes" - ]) - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS"]) - fi - - dnl If an already present or preinstalled GNU gettext() is found, - dnl use it. But if this macro is used in GNU gettext, and GNU - dnl gettext is already preinstalled in libintl, we update this - dnl libintl. (Cf. the install rule in intl/Makefile.in.) - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - dnl Reset the values set by searching for libintl. - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - ifelse(gt_included_intl, yes, [ - if test "$gt_use_preinstalled_gnugettext" != "yes"; then - dnl GNU gettext is not found in the C library. - dnl Fall back on included GNU gettext library. - nls_cv_use_gnu_gettext=yes - fi - fi - - if test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions used to generate GNU NLS library. - BUILD_INCLUDED_LIBINTL=yes - USE_INCLUDED_LIBINTL=yes - LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD" - LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD" - LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` - fi - - CATOBJEXT= - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions to use GNU gettext tools. - CATOBJEXT=.gmo - fi - ]) - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Some extra flags are needed during linking. - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - AC_DEFINE([ENABLE_NLS], [1], - [Define to 1 if translation of program messages to the user's native language - is requested.]) - else - USE_NLS=no - fi - fi - - AC_MSG_CHECKING([whether to use NLS]) - AC_MSG_RESULT([$USE_NLS]) - if test "$USE_NLS" = "yes"; then - AC_MSG_CHECKING([where the gettext function comes from]) - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - AC_MSG_RESULT([$gt_source]) - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - AC_MSG_CHECKING([how to link with libintl]) - AC_MSG_RESULT([$LIBINTL]) - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) - fi - - dnl For backward compatibility. Some packages may be using this. - AC_DEFINE([HAVE_GETTEXT], [1], - [Define if the GNU gettext() function is already present or preinstalled.]) - AC_DEFINE([HAVE_DCGETTEXT], [1], - [Define if the GNU dcgettext() function is already present or preinstalled.]) - fi - - dnl We need to process the po/ directory. - POSUB=po - fi - - ifelse(gt_included_intl, yes, [ - dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL - dnl to 'yes' because some of the testsuite requires it. - if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then - BUILD_INCLUDED_LIBINTL=yes - fi - - dnl Make all variables we use known to autoconf. - AC_SUBST([BUILD_INCLUDED_LIBINTL]) - AC_SUBST([USE_INCLUDED_LIBINTL]) - AC_SUBST([CATOBJEXT]) - - dnl For backward compatibility. Some configure.ins may be using this. - nls_cv_header_intl= - nls_cv_header_libgt= - - dnl For backward compatibility. Some Makefiles may be using this. - DATADIRNAME=share - AC_SUBST([DATADIRNAME]) - - dnl For backward compatibility. Some Makefiles may be using this. - INSTOBJEXT=.mo - AC_SUBST([INSTOBJEXT]) - - dnl For backward compatibility. Some Makefiles may be using this. - GENCAT=gencat - AC_SUBST([GENCAT]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLOBJS= - if test "$USE_INCLUDED_LIBINTL" = yes; then - INTLOBJS="\$(GETTOBJS)" - fi - AC_SUBST([INTLOBJS]) - - dnl Enable libtool support if the surrounding package wishes it. - INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix - AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX]) - ]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLLIBS="$LIBINTL" - AC_SUBST([INTLLIBS]) - - dnl Make all documented variables known to autoconf. - AC_SUBST([LIBINTL]) - AC_SUBST([LTLIBINTL]) - AC_SUBST([POSUB]) -]) - - -dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. -m4_define([gt_NEEDS_INIT], -[ - m4_divert_text([DEFAULTS], [gt_needs=]) - m4_define([gt_NEEDS_INIT], []) -]) - - -dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) -AC_DEFUN([AM_GNU_GETTEXT_NEED], -[ - m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) -]) - - -dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) -AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) - - -dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version]) -AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], []) diff -Nru eog-3.26.2/m4/gtk-doc.m4 eog-3.27.90/m4/gtk-doc.m4 --- eog-3.26.2/m4/gtk-doc.m4 2017-11-08 19:35:45.000000000 +0000 +++ eog-3.27.90/m4/gtk-doc.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,88 +0,0 @@ -dnl -*- mode: autoconf -*- - -# serial 2 - -dnl Usage: -dnl GTK_DOC_CHECK([minimum-gtk-doc-version]) -AC_DEFUN([GTK_DOC_CHECK], -[ - AC_REQUIRE([PKG_PROG_PKG_CONFIG]) - AC_BEFORE([AC_PROG_LIBTOOL],[$0])dnl setup libtool first - AC_BEFORE([AM_PROG_LIBTOOL],[$0])dnl setup libtool first - - ifelse([$1],[],[gtk_doc_requires="gtk-doc"],[gtk_doc_requires="gtk-doc >= $1"]) - AC_MSG_CHECKING([for gtk-doc]) - PKG_CHECK_EXISTS([$gtk_doc_requires],[have_gtk_doc=yes],[have_gtk_doc=no]) - AC_MSG_RESULT($have_gtk_doc) - - if test "$have_gtk_doc" = "no"; then - AC_MSG_WARN([ - You will not be able to create source packages with 'make dist' - because $gtk_doc_requires is not found.]) - fi - - dnl check for tools we added during development - dnl Use AC_CHECK_PROG to avoid the check target using an absolute path that - dnl may not be writable by the user. Currently, automake requires that the - dnl test name must end in '.test'. - dnl https://bugzilla.gnome.org/show_bug.cgi?id=701638 - AC_CHECK_PROG([GTKDOC_CHECK],[gtkdoc-check],[gtkdoc-check.test]) - AC_PATH_PROG([GTKDOC_CHECK_PATH],[gtkdoc-check]) - AC_PATH_PROGS([GTKDOC_REBASE],[gtkdoc-rebase],[true]) - AC_PATH_PROG([GTKDOC_MKPDF],[gtkdoc-mkpdf]) - - dnl for overriding the documentation installation directory - AC_ARG_WITH([html-dir], - AS_HELP_STRING([--with-html-dir=PATH], [path to installed docs]),, - [with_html_dir='${datadir}/gtk-doc/html']) - HTML_DIR="$with_html_dir" - AC_SUBST([HTML_DIR]) - - dnl enable/disable documentation building - AC_ARG_ENABLE([gtk-doc], - AS_HELP_STRING([--enable-gtk-doc], - [use gtk-doc to build documentation [[default=no]]]),, - [enable_gtk_doc=no]) - - AC_MSG_CHECKING([whether to build gtk-doc documentation]) - AC_MSG_RESULT($enable_gtk_doc) - - if test "x$enable_gtk_doc" = "xyes" && test "$have_gtk_doc" = "no"; then - AC_MSG_ERROR([ - You must have $gtk_doc_requires installed to build documentation for - $PACKAGE_NAME. Please install gtk-doc or disable building the - documentation by adding '--disable-gtk-doc' to '[$]0'.]) - fi - - dnl don't check for glib if we build glib - if test "x$PACKAGE_NAME" != "xglib"; then - dnl don't fail if someone does not have glib - PKG_CHECK_MODULES(GTKDOC_DEPS, glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0,,[:]) - fi - - dnl enable/disable output formats - AC_ARG_ENABLE([gtk-doc-html], - AS_HELP_STRING([--enable-gtk-doc-html], - [build documentation in html format [[default=yes]]]),, - [enable_gtk_doc_html=yes]) - AC_ARG_ENABLE([gtk-doc-pdf], - AS_HELP_STRING([--enable-gtk-doc-pdf], - [build documentation in pdf format [[default=no]]]),, - [enable_gtk_doc_pdf=no]) - - if test -z "$GTKDOC_MKPDF"; then - enable_gtk_doc_pdf=no - fi - - if test -z "$AM_DEFAULT_VERBOSITY"; then - AM_DEFAULT_VERBOSITY=1 - fi - AC_SUBST([AM_DEFAULT_VERBOSITY]) - - AM_CONDITIONAL([HAVE_GTK_DOC], [test x$have_gtk_doc = xyes]) - AM_CONDITIONAL([ENABLE_GTK_DOC], [test x$enable_gtk_doc = xyes]) - AM_CONDITIONAL([GTK_DOC_BUILD_HTML], [test x$enable_gtk_doc_html = xyes]) - AM_CONDITIONAL([GTK_DOC_BUILD_PDF], [test x$enable_gtk_doc_pdf = xyes]) - AM_CONDITIONAL([GTK_DOC_USE_LIBTOOL], [test -n "$LIBTOOL"]) - AM_CONDITIONAL([GTK_DOC_USE_REBASE], [test -n "$GTKDOC_REBASE"]) -]) diff -Nru eog-3.26.2/m4/iconv.m4 eog-3.27.90/m4/iconv.m4 --- eog-3.26.2/m4/iconv.m4 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/m4/iconv.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,271 +0,0 @@ -# iconv.m4 serial 19 (gettext-0.18.2) -dnl Copyright (C) 2000-2002, 2007-2014 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], -[ - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([iconv]) -]) - -AC_DEFUN([AM_ICONV_LINK], -[ - dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and - dnl those with the standalone portable GNU libiconv installed). - AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - - dnl Add $INCICONV to CPPFLAGS before performing the following checks, - dnl because if the user has installed libiconv and not disabled its use - dnl via --without-libiconv-prefix, he wants to use it. The first - dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed. - am_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) - - AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [ - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#include - ]], - [[iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);]])], - [am_cv_func_iconv=yes]) - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#include - ]], - [[iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);]])], - [am_cv_lib_iconv=yes] - [am_cv_func_iconv=yes]) - LIBS="$am_save_LIBS" - fi - ]) - if test "$am_cv_func_iconv" = yes; then - AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [ - dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11, - dnl Solaris 10. - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - am_cv_func_iconv_works=no - for ac_iconv_const in '' 'const'; do - AC_RUN_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#include - -#ifndef ICONV_CONST -# define ICONV_CONST $ac_iconv_const -#endif - ]], - [[int result = 0; - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 1; - iconv_close (cd_utf8_to_88591); - } - } - /* Test against Solaris 10 bug: Failures are not distinguishable from - successful returns. */ - { - iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); - if (cd_ascii_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\263"; - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_ascii_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 2; - iconv_close (cd_ascii_to_88591); - } - } - /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304"; - static char buf[2] = { (char)0xDE, (char)0xAD }; - ICONV_CONST char *inptr = input; - size_t inbytesleft = 1; - char *outptr = buf; - size_t outbytesleft = 1; - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) - result |= 4; - iconv_close (cd_88591_to_utf8); - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - result |= 8; - iconv_close (cd_88591_to_utf8); - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - if (/* Try standardized names. */ - iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) - /* Try IRIX, OSF/1 names. */ - && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) - /* Try AIX names. */ - && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) - /* Try HP-UX names. */ - && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) - result |= 16; - return result; -]])], - [am_cv_func_iconv_works=yes], , - [case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac]) - test "$am_cv_func_iconv_works" = no || break - done - LIBS="$am_save_LIBS" - ]) - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - AC_DEFINE([HAVE_ICONV], [1], - [Define if you have the iconv() function and it works.]) - fi - if test "$am_cv_lib_iconv" = yes; then - AC_MSG_CHECKING([how to link with libiconv]) - AC_MSG_RESULT([$LIBICONV]) - else - dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV - dnl either. - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - AC_SUBST([LIBICONV]) - AC_SUBST([LTLIBICONV]) -]) - -dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to -dnl avoid warnings like -dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required". -dnl This is tricky because of the way 'aclocal' is implemented: -dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN. -dnl Otherwise aclocal's initial scan pass would miss the macro definition. -dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions. -dnl Otherwise aclocal would emit many "Use of uninitialized value $1" -dnl warnings. -m4_define([gl_iconv_AC_DEFUN], - m4_version_prereq([2.64], - [[AC_DEFUN_ONCE( - [$1], [$2])]], - [m4_ifdef([gl_00GNULIB], - [[AC_DEFUN_ONCE( - [$1], [$2])]], - [[AC_DEFUN( - [$1], [$2])]])])) -gl_iconv_AC_DEFUN([AM_ICONV], -[ - AM_ICONV_LINK - if test "$am_cv_func_iconv" = yes; then - AC_MSG_CHECKING([for iconv declaration]) - AC_CACHE_VAL([am_cv_proto_iconv], [ - AC_COMPILE_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#include -extern -#ifdef __cplusplus -"C" -#endif -#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) -size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); -#else -size_t iconv(); -#endif - ]], - [[]])], - [am_cv_proto_iconv_arg1=""], - [am_cv_proto_iconv_arg1="const"]) - am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) - am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` - AC_MSG_RESULT([ - $am_cv_proto_iconv]) - AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1], - [Define as const if the declaration of iconv() needs const.]) - dnl Also substitute ICONV_CONST in the gnulib generated . - m4_ifdef([gl_ICONV_H_DEFAULTS], - [AC_REQUIRE([gl_ICONV_H_DEFAULTS]) - if test -n "$am_cv_proto_iconv_arg1"; then - ICONV_CONST="const" - fi - ]) - fi -]) diff -Nru eog-3.26.2/m4/intlmacosx.m4 eog-3.27.90/m4/intlmacosx.m4 --- eog-3.26.2/m4/intlmacosx.m4 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/m4/intlmacosx.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ -# intlmacosx.m4 serial 5 (gettext-0.18.2) -dnl Copyright (C) 2004-2014 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Checks for special options needed on Mac OS X. -dnl Defines INTL_MACOSX_LIBS. -AC_DEFUN([gt_INTL_MACOSX], -[ - dnl Check for API introduced in Mac OS X 10.2. - AC_CACHE_CHECK([for CFPreferencesCopyAppValue], - [gt_cv_func_CFPreferencesCopyAppValue], - [gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[#include ]], - [[CFPreferencesCopyAppValue(NULL, NULL)]])], - [gt_cv_func_CFPreferencesCopyAppValue=yes], - [gt_cv_func_CFPreferencesCopyAppValue=no]) - LIBS="$gt_save_LIBS"]) - if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then - AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1], - [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) - fi - dnl Check for API introduced in Mac OS X 10.3. - AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent], - [gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[#include ]], - [[CFLocaleCopyCurrent();]])], - [gt_cv_func_CFLocaleCopyCurrent=yes], - [gt_cv_func_CFLocaleCopyCurrent=no]) - LIBS="$gt_save_LIBS"]) - if test $gt_cv_func_CFLocaleCopyCurrent = yes; then - AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1], - [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.]) - fi - INTL_MACOSX_LIBS= - if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then - INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" - fi - AC_SUBST([INTL_MACOSX_LIBS]) -]) diff -Nru eog-3.26.2/m4/lib-ld.m4 eog-3.27.90/m4/lib-ld.m4 --- eog-3.26.2/m4/lib-ld.m4 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/m4/lib-ld.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,119 +0,0 @@ -# lib-ld.m4 serial 6 -dnl Copyright (C) 1996-2003, 2009-2015 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl Subroutines of libtool.m4, -dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid -dnl collision with libtool.m4. - -dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no. -AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], -[# I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 /dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` - while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL([acl_cv_path_LD], -[if test -z "$LD"; then - acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$acl_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 = 1.10 to complain if config.rpath is missing. - m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) - AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS - AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld - AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host - AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ]) - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE([rpath], - [ --disable-rpath do not hardcode runtime library paths], - :, enable_rpath=yes) -]) - -dnl AC_LIB_FROMPACKAGE(name, package) -dnl declares that libname comes from the given package. The configure file -dnl will then not have a --with-libname-prefix option but a -dnl --with-package-prefix option. Several libraries can come from the same -dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar -dnl macro call that searches for libname. -AC_DEFUN([AC_LIB_FROMPACKAGE], -[ - pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - define([acl_frompackage_]NAME, [$2]) - popdef([NAME]) - pushdef([PACK],[$2]) - pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - define([acl_libsinpackage_]PACKUP, - m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1]) - popdef([PACKUP]) - popdef([PACK]) -]) - -dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. -dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found -dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_LINKFLAGS_BODY], -[ - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) - pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) - dnl Autoconf >= 2.61 supports dots in --with options. - pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[m4_translit(PACK,[.],[_])],PACK)]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_ARG_WITH(P_A_C_K[-prefix], -[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib - --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi -]) - dnl Search the library and its dependencies in $additional_libdir and - dnl $LDFLAGS. Using breadth-first-seach. - LIB[]NAME= - LTLIB[]NAME= - INC[]NAME= - LIB[]NAME[]_PREFIX= - dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been - dnl computed. So it has to be reset here. - HAVE_LIB[]NAME= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='$1 $2' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - dnl See if it was already located by an earlier AC_LIB_LINKFLAGS - dnl or AC_LIB_HAVE_LINKFLAGS call. - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" - else - dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined - dnl that this library doesn't exist. So just drop it. - : - fi - else - dnl Search the library lib$name in $additional_libdir and $LDFLAGS - dnl and the already constructed $LIBNAME/$LTLIBNAME. - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - dnl The same code as in the loop below: - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - dnl Found the library. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - dnl Linking with a shared library. We attempt to hardcode its - dnl directory into the executable's runpath, unless it's the - dnl standard /usr/lib. - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - dnl No hardcoding is needed. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - dnl The hardcoding into $LIBNAME is system dependent. - if test "$acl_hardcode_direct" = yes; then - dnl Using DIR/libNAME.so during linking hardcodes DIR into the - dnl resulting binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - dnl Rely on "-L$found_dir". - dnl But don't add it if it's already contained in the LDFLAGS - dnl or the already constructed $LIBNAME - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH - dnl here, because this doesn't fit in flags passed to the - dnl compiler. So give up. No hardcoding. This affects only - dnl very old systems. - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - dnl Linking with a static library. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" - else - dnl We shouldn't come here, but anyway it's good to have a - dnl fallback. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" - fi - fi - dnl Assume the include files are nearby. - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - dnl Potentially add $additional_includedir to $INCNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's /usr/local/include and we are using GCC on Linux, - dnl 3. if it's already present in $CPPFLAGS or the already - dnl constructed $INCNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INC[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $INCNAME. - INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - dnl Look for dependencies. - if test -n "$found_la"; then - dnl Read the .la file. It defines the variables - dnl dlname, library_names, old_library, dependency_libs, current, - dnl age, revision, installed, dlopen, dlpreopen, libdir. - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - dnl We use only dependency_libs. - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's /usr/local/lib and we are using GCC on Linux, - dnl 3. if it's already present in $LDFLAGS or the already - dnl constructed $LIBNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LIBNAME. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LTLIBNAME. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dnl Handle this in the next round. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - dnl Handle this in the next round. Throw away the .la's - dnl directory; it is already contained in a preceding -L - dnl option. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - dnl Most likely an immediate library name. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" - ;; - esac - done - fi - else - dnl Didn't find the library; assume it is in the system directories - dnl known to the linker and runtime loader. (All the system - dnl directories known to the linker should also be known to the - dnl runtime loader, otherwise the system is severely misconfigured.) - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user must - dnl pass all path elements in one option. We can arrange that for a - dnl single library, but not when more than one $LIBNAMEs are used. - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - else - dnl The -rpath options are cumulative. - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - dnl When using libtool, the option that works for both libraries and - dnl executables is -R. The -R options are cumulative. - for found_dir in $ltrpathdirs; do - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" - done - fi - popdef([P_A_C_K]) - popdef([PACKLIBS]) - popdef([PACKUP]) - popdef([PACK]) - popdef([NAME]) -]) - -dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, -dnl unless already present in VAR. -dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes -dnl contains two or three consecutive elements that belong together. -AC_DEFUN([AC_LIB_APPENDTOVAR], -[ - for element in [$2]; do - haveit= - for x in $[$1]; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - [$1]="${[$1]}${[$1]:+ }$element" - fi - done -]) - -dnl For those cases where a variable contains several -L and -l options -dnl referring to unknown libraries and directories, this macro determines the -dnl necessary additional linker options for the runtime path. -dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) -dnl sets LDADDVAR to linker options needed together with LIBSVALUE. -dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, -dnl otherwise linking without libtool is assumed. -AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], -[ - AC_REQUIRE([AC_LIB_RPATH]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - $1= - if test "$enable_rpath" != no; then - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode directories into the resulting - dnl binary. - rpathdirs= - next= - for opt in $2; do - if test -n "$next"; then - dir="$next" - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem" \ - && test "X$dir" != "X/usr/$acl_libdirstem2"; then - rpathdirs="$rpathdirs $dir" - fi - next= - else - case $opt in - -L) next=yes ;; - -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem" \ - && test "X$dir" != "X/usr/$acl_libdirstem2"; then - rpathdirs="$rpathdirs $dir" - fi - next= ;; - *) next= ;; - esac - fi - done - if test "X$rpathdirs" != "X"; then - if test -n ""$3""; then - dnl libtool is used for linking. Use -R options. - for dir in $rpathdirs; do - $1="${$1}${$1:+ }-R$dir" - done - else - dnl The linker is used for linking directly. - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user - dnl must pass all path elements in one option. - alldirs= - for dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="$flag" - else - dnl The -rpath options are cumulative. - for dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="${$1}${$1:+ }$flag" - done - fi - fi - fi - fi - fi - AC_SUBST([$1]) -]) diff -Nru eog-3.26.2/m4/lib-prefix.m4 eog-3.27.90/m4/lib-prefix.m4 --- eog-3.26.2/m4/lib-prefix.m4 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/m4/lib-prefix.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,224 +0,0 @@ -# lib-prefix.m4 serial 7 (gettext-0.18) -dnl Copyright (C) 2001-2005, 2008-2015 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and -dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't -dnl require excessive bracketing. -ifdef([AC_HELP_STRING], -[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], -[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) - -dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed -dnl to access previously installed libraries. The basic assumption is that -dnl a user will want packages to use other packages he previously installed -dnl with the same --prefix option. -dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate -dnl libraries, but is otherwise very convenient. -AC_DEFUN([AC_LIB_PREFIX], -[ - AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib-prefix], -[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib - --without-lib-prefix don't search for libraries in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - fi - fi -]) - if test $use_additional = yes; then - dnl Potentially add $additional_includedir to $CPPFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's already present in $CPPFLAGS, - dnl 3. if it's /usr/local/include and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - for x in $CPPFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $CPPFLAGS. - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" - fi - fi - fi - fi - dnl Potentially add $additional_libdir to $LDFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's already present in $LDFLAGS, - dnl 3. if it's /usr/local/lib and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then - haveit= - for x in $LDFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LDFLAGS. - LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" - fi - fi - fi - fi - fi -]) - -dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, -dnl acl_final_exec_prefix, containing the values to which $prefix and -dnl $exec_prefix will expand at the end of the configure script. -AC_DEFUN([AC_LIB_PREPARE_PREFIX], -[ - dnl Unfortunately, prefix and exec_prefix get only finally determined - dnl at the end of configure. - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the -dnl variables prefix and exec_prefix bound to the values they will have -dnl at the end of the configure script. -AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], -[ - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - $1 - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_PREPARE_MULTILIB creates -dnl - a variable acl_libdirstem, containing the basename of the libdir, either -dnl "lib" or "lib64" or "lib/64", -dnl - a variable acl_libdirstem2, as a secondary possible value for -dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or -dnl "lib/amd64". -AC_DEFUN([AC_LIB_PREPARE_MULTILIB], -[ - dnl There is no formal standard regarding lib and lib64. - dnl On glibc systems, the current practice is that on a system supporting - dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under - dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine - dnl the compiler's default mode by looking at the compiler's library search - dnl path. If at least one of its elements ends in /lib64 or points to a - dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI. - dnl Otherwise we use the default, namely "lib". - dnl On Solaris systems, the current practice is that on a system supporting - dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under - dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or - dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. - AC_REQUIRE([AC_CANONICAL_HOST]) - acl_libdirstem=lib - acl_libdirstem2= - case "$host_os" in - solaris*) - dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment - dnl . - dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." - dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the - dnl symlink is missing, so we set acl_libdirstem2 too. - AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit], - [AC_EGREP_CPP([sixtyfour bits], [ -#ifdef _LP64 -sixtyfour bits -#endif - ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no]) - ]) - if test $gl_cv_solaris_64bit = yes; then - acl_libdirstem=lib/64 - case "$host_cpu" in - sparc*) acl_libdirstem2=lib/sparcv9 ;; - i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; - esac - fi - ;; - *) - searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; - */../ | */.. ) - # Better ignore directories of this form. They are misleading. - ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib64 ) acl_libdirstem=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - fi - ;; - esac - test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" -]) diff -Nru eog-3.26.2/m4/libtool.m4 eog-3.27.90/m4/libtool.m4 --- eog-3.26.2/m4/libtool.m4 2017-11-08 19:35:52.000000000 +0000 +++ eog-3.27.90/m4/libtool.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,8372 +0,0 @@ -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# -# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -m4_define([_LT_COPYING], [dnl -# Copyright (C) 2014 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program or library that is built -# using GNU Libtool, you may include this file under the same -# distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -]) - -# serial 58 LT_INIT - - -# LT_PREREQ(VERSION) -# ------------------ -# Complain and exit if this libtool version is less that VERSION. -m4_defun([LT_PREREQ], -[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, - [m4_default([$3], - [m4_fatal([Libtool version $1 or higher is required], - 63)])], - [$2])]) - - -# _LT_CHECK_BUILDDIR -# ------------------ -# Complain if the absolute build directory name contains unusual characters -m4_defun([_LT_CHECK_BUILDDIR], -[case `pwd` in - *\ * | *\ *) - AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; -esac -]) - - -# LT_INIT([OPTIONS]) -# ------------------ -AC_DEFUN([LT_INIT], -[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK -AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -AC_BEFORE([$0], [LT_LANG])dnl -AC_BEFORE([$0], [LT_OUTPUT])dnl -AC_BEFORE([$0], [LTDL_INIT])dnl -m4_require([_LT_CHECK_BUILDDIR])dnl - -dnl Autoconf doesn't catch unexpanded LT_ macros by default: -m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -dnl unless we require an AC_DEFUNed macro: -AC_REQUIRE([LTOPTIONS_VERSION])dnl -AC_REQUIRE([LTSUGAR_VERSION])dnl -AC_REQUIRE([LTVERSION_VERSION])dnl -AC_REQUIRE([LTOBSOLETE_VERSION])dnl -m4_require([_LT_PROG_LTMAIN])dnl - -_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) - -dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS=$ltmain - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -_LT_SETUP - -# Only expand once: -m4_define([LT_INIT]) -])# LT_INIT - -# Old names: -AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) -AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PROG_LIBTOOL], []) -dnl AC_DEFUN([AM_PROG_LIBTOOL], []) - - -# _LT_PREPARE_CC_BASENAME -# ----------------------- -m4_defun([_LT_PREPARE_CC_BASENAME], [ -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -func_cc_basename () -{ - for cc_temp in @S|@*""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac - done - func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -} -])# _LT_PREPARE_CC_BASENAME - - -# _LT_CC_BASENAME(CC) -# ------------------- -# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME, -# but that macro is also expanded into generated libtool script, which -# arranges for $SED and $ECHO to be set by different means. -m4_defun([_LT_CC_BASENAME], -[m4_require([_LT_PREPARE_CC_BASENAME])dnl -AC_REQUIRE([_LT_DECL_SED])dnl -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl -func_cc_basename $1 -cc_basename=$func_cc_basename_result -]) - - -# _LT_FILEUTILS_DEFAULTS -# ---------------------- -# It is okay to use these file commands and assume they have been set -# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'. -m4_defun([_LT_FILEUTILS_DEFAULTS], -[: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} -])# _LT_FILEUTILS_DEFAULTS - - -# _LT_SETUP -# --------- -m4_defun([_LT_SETUP], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl - -_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl -dnl -_LT_DECL([], [host_alias], [0], [The host system])dnl -_LT_DECL([], [host], [0])dnl -_LT_DECL([], [host_os], [0])dnl -dnl -_LT_DECL([], [build_alias], [0], [The build system])dnl -_LT_DECL([], [build], [0])dnl -_LT_DECL([], [build_os], [0])dnl -dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -test -z "$LN_S" && LN_S="ln -s" -_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl -dnl -AC_REQUIRE([LT_CMD_MAX_LEN])dnl -_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl -_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl -dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl -m4_require([_LT_CMD_RELOAD])dnl -m4_require([_LT_CHECK_MAGIC_METHOD])dnl -m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl -m4_require([_LT_CMD_OLD_ARCHIVE])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_WITH_SYSROOT])dnl -m4_require([_LT_CMD_TRUNCATE])dnl - -_LT_CONFIG_LIBTOOL_INIT([ -# See if we are running on zsh, and set the options that allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi -]) -if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - -_LT_CHECK_OBJDIR - -m4_require([_LT_TAG_COMPILER])dnl - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld=$lt_cv_prog_gnu_ld - -old_CC=$CC -old_CFLAGS=$CFLAGS - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - _LT_PATH_MAGIC - fi - ;; -esac - -# Use C for the default configuration in the libtool script -LT_SUPPORTED_TAG([CC]) -_LT_LANG_C_CONFIG -_LT_LANG_DEFAULT_CONFIG -_LT_CONFIG_COMMANDS -])# _LT_SETUP - - -# _LT_PREPARE_SED_QUOTE_VARS -# -------------------------- -# Define a few sed substitution that help us do robust quoting. -m4_defun([_LT_PREPARE_SED_QUOTE_VARS], -[# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([["`\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' -]) - -# _LT_PROG_LTMAIN -# --------------- -# Note that this code is called both from 'configure', and 'config.status' -# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# 'config.status' has no value for ac_aux_dir unless we are using Automake, -# so we pass a copy along to make sure it has a sensible value anyway. -m4_defun([_LT_PROG_LTMAIN], -[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl -_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -ltmain=$ac_aux_dir/ltmain.sh -])# _LT_PROG_LTMAIN - - -## ------------------------------------- ## -## Accumulate code for creating libtool. ## -## ------------------------------------- ## - -# So that we can recreate a full libtool script including additional -# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the 'libtool' -# label. - - -# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -# ---------------------------------------- -# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL_INIT], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_INIT], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_INIT]) - - -# _LT_CONFIG_LIBTOOL([COMMANDS]) -# ------------------------------ -# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) - - -# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -# ----------------------------------------------------- -m4_defun([_LT_CONFIG_SAVE_COMMANDS], -[_LT_CONFIG_LIBTOOL([$1]) -_LT_CONFIG_LIBTOOL_INIT([$2]) -]) - - -# _LT_FORMAT_COMMENT([COMMENT]) -# ----------------------------- -# Add leading comment marks to the start of each line, and a trailing -# full-stop to the whole comment if one is not present already. -m4_define([_LT_FORMAT_COMMENT], -[m4_ifval([$1], [ -m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], - [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) -)]) - - - -## ------------------------ ## -## FIXME: Eliminate VARNAME ## -## ------------------------ ## - - -# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -# ------------------------------------------------------------------- -# CONFIGNAME is the name given to the value in the libtool script. -# VARNAME is the (base) name used in the configure script. -# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -# VARNAME. Any other value will be used directly. -m4_define([_LT_DECL], -[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], - [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], - [m4_ifval([$1], [$1], [$2])]) - lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) - m4_ifval([$4], - [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) - lt_dict_add_subkey([lt_decl_dict], [$2], - [tagged?], [m4_ifval([$5], [yes], [no])])]) -]) - - -# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -# -------------------------------------------------------- -m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) - - -# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_tag_varnames], -[_lt_decl_filter([tagged?], [yes], $@)]) - - -# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -# --------------------------------------------------------- -m4_define([_lt_decl_filter], -[m4_case([$#], - [0], [m4_fatal([$0: too few arguments: $#])], - [1], [m4_fatal([$0: too few arguments: $#: $1])], - [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], - [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], - [lt_dict_filter([lt_decl_dict], $@)])[]dnl -]) - - -# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -# -------------------------------------------------- -m4_define([lt_decl_quote_varnames], -[_lt_decl_filter([value], [1], $@)]) - - -# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_dquote_varnames], -[_lt_decl_filter([value], [2], $@)]) - - -# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_varnames_tagged], -[m4_assert([$# <= 2])dnl -_$0(m4_quote(m4_default([$1], [[, ]])), - m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), - m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) -m4_define([_lt_decl_varnames_tagged], -[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) - - -# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_all_varnames], -[_$0(m4_quote(m4_default([$1], [[, ]])), - m4_if([$2], [], - m4_quote(lt_decl_varnames), - m4_quote(m4_shift($@))))[]dnl -]) -m4_define([_lt_decl_all_varnames], -[lt_join($@, lt_decl_varnames_tagged([$1], - lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl -]) - - -# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -# ------------------------------------ -# Quote a variable value, and forward it to 'config.status' so that its -# declaration there will have the same value as in 'configure'. VARNAME -# must have a single quote delimited value for this to work. -m4_define([_LT_CONFIG_STATUS_DECLARE], -[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) - - -# _LT_CONFIG_STATUS_DECLARATIONS -# ------------------------------ -# We delimit libtool config variables with single quotes, so when -# we write them to config.status, we have to be sure to quote all -# embedded single quotes properly. In configure, this macro expands -# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -# -# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' -m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], -[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), - [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAGS -# ---------------- -# Output comment and list of tags supported by the script -m4_defun([_LT_LIBTOOL_TAGS], -[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -available_tags='_LT_TAGS'dnl -]) - - -# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -# ----------------------------------- -# Extract the dictionary values for VARNAME (optionally with TAG) and -# expand to a commented shell variable setting: -# -# # Some comment about what VAR is for. -# visible_name=$lt_internal_name -m4_define([_LT_LIBTOOL_DECLARE], -[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], - [description])))[]dnl -m4_pushdef([_libtool_name], - m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl -m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), - [0], [_libtool_name=[$]$1], - [1], [_libtool_name=$lt_[]$1], - [2], [_libtool_name=$lt_[]$1], - [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl -m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl -]) - - -# _LT_LIBTOOL_CONFIG_VARS -# ----------------------- -# Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool' -# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -# section) are produced by _LT_LIBTOOL_TAG_VARS. -m4_defun([_LT_LIBTOOL_CONFIG_VARS], -[m4_foreach([_lt_var], - m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAG_VARS(TAG) -# ------------------------- -m4_define([_LT_LIBTOOL_TAG_VARS], -[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) - - -# _LT_TAGVAR(VARNAME, [TAGNAME]) -# ------------------------------ -m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) - - -# _LT_CONFIG_COMMANDS -# ------------------- -# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -# variables for single and double quote escaping we saved from calls -# to _LT_DECL, we can put quote escaped variables declarations -# into 'config.status', and then the shell code to quote escape them in -# for loops in 'config.status'. Finally, any additional code accumulated -# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -m4_defun([_LT_CONFIG_COMMANDS], -[AC_PROVIDE_IFELSE([LT_OUTPUT], - dnl If the libtool generation code has been placed in $CONFIG_LT, - dnl instead of duplicating it all over again into config.status, - dnl then we will have config.status run $CONFIG_LT later, so it - dnl needs to know what name is stored there: - [AC_CONFIG_COMMANDS([libtool], - [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], - dnl If the libtool generation code is destined for config.status, - dnl expand the accumulated commands and init code now: - [AC_CONFIG_COMMANDS([libtool], - [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) -])#_LT_CONFIG_COMMANDS - - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], -[ - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -_LT_CONFIG_STATUS_DECLARATIONS -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$[]1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_quote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_dquote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -_LT_OUTPUT_LIBTOOL_INIT -]) - -# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) -# ------------------------------------ -# Generate a child script FILE with all initialization necessary to -# reuse the environment learned by the parent script, and make the -# file executable. If COMMENT is supplied, it is inserted after the -# '#!' sequence but before initialization text begins. After this -# macro, additional text can be appended to FILE to form the body of -# the child script. The macro ends with non-zero status if the -# file could not be fully written (such as if the disk is full). -m4_ifdef([AS_INIT_GENERATED], -[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], -[m4_defun([_LT_GENERATED_FILE_INIT], -[m4_require([AS_PREPARE])]dnl -[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl -[lt_write_fail=0 -cat >$1 <<_ASEOF || lt_write_fail=1 -#! $SHELL -# Generated by $as_me. -$2 -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$1 <<\_ASEOF || lt_write_fail=1 -AS_SHELL_SANITIZE -_AS_PREPARE -exec AS_MESSAGE_FD>&1 -_ASEOF -test 0 = "$lt_write_fail" && chmod +x $1[]dnl -m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT - -# LT_OUTPUT -# --------- -# This macro allows early generation of the libtool script (before -# AC_OUTPUT is called), incase it is used in configure for compilation -# tests. -AC_DEFUN([LT_OUTPUT], -[: ${CONFIG_LT=./config.lt} -AC_MSG_NOTICE([creating $CONFIG_LT]) -_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], -[# Run this file to recreate a libtool stub with the current configuration.]) - -cat >>"$CONFIG_LT" <<\_LTEOF -lt_cl_silent=false -exec AS_MESSAGE_LOG_FD>>config.log -{ - echo - AS_BOX([Running $as_me.]) -} >&AS_MESSAGE_LOG_FD - -lt_cl_help="\ -'$as_me' creates a local libtool stub from the current configuration, -for use in further configure time tests before the real libtool is -generated. - -Usage: $[0] [[OPTIONS]] - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - -Report bugs to ." - -lt_cl_version="\ -m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -configured by $[0], generated by m4_PACKAGE_STRING. - -Copyright (C) 2011 Free Software Foundation, Inc. -This config.lt script is free software; the Free Software Foundation -gives unlimited permision to copy, distribute and modify it." - -while test 0 != $[#] -do - case $[1] in - --version | --v* | -V ) - echo "$lt_cl_version"; exit 0 ;; - --help | --h* | -h ) - echo "$lt_cl_help"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --quiet | --q* | --silent | --s* | -q ) - lt_cl_silent=: ;; - - -*) AC_MSG_ERROR([unrecognized option: $[1] -Try '$[0] --help' for more information.]) ;; - - *) AC_MSG_ERROR([unrecognized argument: $[1] -Try '$[0] --help' for more information.]) ;; - esac - shift -done - -if $lt_cl_silent; then - exec AS_MESSAGE_FD>/dev/null -fi -_LTEOF - -cat >>"$CONFIG_LT" <<_LTEOF -_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AC_MSG_NOTICE([creating $ofile]) -_LT_OUTPUT_LIBTOOL_COMMANDS -AS_EXIT(0) -_LTEOF -chmod +x "$CONFIG_LT" - -# configure is writing to config.log, but config.lt does its own redirection, -# appending to config.log, which fails on DOS, as config.log is still kept -# open by configure. Here we exec the FD to /dev/null, effectively closing -# config.log, so it can be properly (re)opened and appended to by config.lt. -lt_cl_success=: -test yes = "$silent" && - lt_config_lt_args="$lt_config_lt_args --quiet" -exec AS_MESSAGE_LOG_FD>/dev/null -$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -exec AS_MESSAGE_LOG_FD>>config.log -$lt_cl_success || AS_EXIT(1) -])# LT_OUTPUT - - -# _LT_CONFIG(TAG) -# --------------- -# If TAG is the built-in tag, create an initial libtool script with a -# default configuration from the untagged config vars. Otherwise add code -# to config.status for appending the configuration named by TAG from the -# matching tagged config vars. -m4_defun([_LT_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_CONFIG_SAVE_COMMANDS([ - m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl - m4_if(_LT_TAG, [C], [ - # See if we are running on zsh, and set the options that allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST - fi - - cfgfile=${ofile}T - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL -# Generated automatically by $as_me ($PACKAGE) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. - -# Provide generalized library-building support services. -# Written by Gordon Matzigkeit, 1996 - -_LT_COPYING -_LT_LIBTOOL_TAGS - -# Configured defaults for sys_lib_dlsearch_path munging. -: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} - -# ### BEGIN LIBTOOL CONFIG -_LT_LIBTOOL_CONFIG_VARS -_LT_LIBTOOL_TAG_VARS -# ### END LIBTOOL CONFIG - -_LT_EOF - - cat <<'_LT_EOF' >> "$cfgfile" - -# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE - -_LT_PREPARE_MUNGE_PATH_LIST -_LT_PREPARE_CC_BASENAME - -# ### END FUNCTIONS SHARED WITH CONFIGURE - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - _LT_PROG_LTMAIN - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -], -[cat <<_LT_EOF >> "$ofile" - -dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded -dnl in a comment (ie after a #). -# ### BEGIN LIBTOOL TAG CONFIG: $1 -_LT_LIBTOOL_TAG_VARS(_LT_TAG) -# ### END LIBTOOL TAG CONFIG: $1 -_LT_EOF -])dnl /m4_if -], -[m4_if([$1], [], [ - PACKAGE='$PACKAGE' - VERSION='$VERSION' - RM='$RM' - ofile='$ofile'], []) -])dnl /_LT_CONFIG_SAVE_COMMANDS -])# _LT_CONFIG - - -# LT_SUPPORTED_TAG(TAG) -# --------------------- -# Trace this macro to discover what tags are supported by the libtool -# --tag option, using: -# autoconf --trace 'LT_SUPPORTED_TAG:$1' -AC_DEFUN([LT_SUPPORTED_TAG], []) - - -# C support is built-in for now -m4_define([_LT_LANG_C_enabled], []) -m4_define([_LT_TAGS], []) - - -# LT_LANG(LANG) -# ------------- -# Enable libtool support for the given language if not already enabled. -AC_DEFUN([LT_LANG], -[AC_BEFORE([$0], [LT_OUTPUT])dnl -m4_case([$1], - [C], [_LT_LANG(C)], - [C++], [_LT_LANG(CXX)], - [Go], [_LT_LANG(GO)], - [Java], [_LT_LANG(GCJ)], - [Fortran 77], [_LT_LANG(F77)], - [Fortran], [_LT_LANG(FC)], - [Windows Resource], [_LT_LANG(RC)], - [m4_ifdef([_LT_LANG_]$1[_CONFIG], - [_LT_LANG($1)], - [m4_fatal([$0: unsupported language: "$1"])])])dnl -])# LT_LANG - - -# _LT_LANG(LANGNAME) -# ------------------ -m4_defun([_LT_LANG], -[m4_ifdef([_LT_LANG_]$1[_enabled], [], - [LT_SUPPORTED_TAG([$1])dnl - m4_append([_LT_TAGS], [$1 ])dnl - m4_define([_LT_LANG_]$1[_enabled], [])dnl - _LT_LANG_$1_CONFIG($1)])dnl -])# _LT_LANG - - -m4_ifndef([AC_PROG_GO], [ -############################################################ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_GO. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -############################################################ -m4_defun([AC_PROG_GO], -[AC_LANG_PUSH(Go)dnl -AC_ARG_VAR([GOC], [Go compiler command])dnl -AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl -_AC_ARG_VAR_LDFLAGS()dnl -AC_CHECK_TOOL(GOC, gccgo) -if test -z "$GOC"; then - if test -n "$ac_tool_prefix"; then - AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) - fi -fi -if test -z "$GOC"; then - AC_CHECK_PROG(GOC, gccgo, gccgo, false) -fi -])#m4_defun -])#m4_ifndef - - -# _LT_LANG_DEFAULT_CONFIG -# ----------------------- -m4_defun([_LT_LANG_DEFAULT_CONFIG], -[AC_PROVIDE_IFELSE([AC_PROG_CXX], - [LT_LANG(CXX)], - [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) - -AC_PROVIDE_IFELSE([AC_PROG_F77], - [LT_LANG(F77)], - [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) - -AC_PROVIDE_IFELSE([AC_PROG_FC], - [LT_LANG(FC)], - [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) - -dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal -dnl pulling things in needlessly. -AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([LT_PROG_GCJ], - [LT_LANG(GCJ)], - [m4_ifdef([AC_PROG_GCJ], - [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([A][M_PROG_GCJ], - [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([LT_PROG_GCJ], - [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) - -AC_PROVIDE_IFELSE([AC_PROG_GO], - [LT_LANG(GO)], - [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) - -AC_PROVIDE_IFELSE([LT_PROG_RC], - [LT_LANG(RC)], - [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -])# _LT_LANG_DEFAULT_CONFIG - -# Obsolete macros: -AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_CXX], []) -dnl AC_DEFUN([AC_LIBTOOL_F77], []) -dnl AC_DEFUN([AC_LIBTOOL_FC], []) -dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) -dnl AC_DEFUN([AC_LIBTOOL_RC], []) - - -# _LT_TAG_COMPILER -# ---------------- -m4_defun([_LT_TAG_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl -_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl -_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl -_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_TAG_COMPILER - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -m4_defun([_LT_COMPILER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -m4_defun([_LT_LINKER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* -])# _LT_LINKER_BOILERPLATE - -# _LT_REQUIRED_DARWIN_CHECKS -# ------------------------- -m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ - case $host_os in - rhapsody* | darwin*) - AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) - AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) - AC_CHECK_TOOL([LIPO], [lipo], [:]) - AC_CHECK_TOOL([OTOOL], [otool], [:]) - AC_CHECK_TOOL([OTOOL64], [otool64], [:]) - _LT_DECL([], [DSYMUTIL], [1], - [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) - _LT_DECL([], [NMEDIT], [1], - [Tool to change global to local symbols on Mac OS X]) - _LT_DECL([], [LIPO], [1], - [Tool to manipulate fat objects and archives on Mac OS X]) - _LT_DECL([], [OTOOL], [1], - [ldd/readelf like tool for Mach-O binaries on Mac OS X]) - _LT_DECL([], [OTOOL64], [1], - [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) - - AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], - [lt_cv_apple_cc_single_mod=no - if test -z "$LT_MULTI_MODULE"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&AS_MESSAGE_LOG_FD - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test 0 = "$_lt_result"; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi]) - - AC_CACHE_CHECK([for -exported_symbols_list linker flag], - [lt_cv_ld_exported_symbols_list], - [lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [lt_cv_ld_exported_symbols_list=yes], - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS=$save_LDFLAGS - ]) - - AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], - [lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD - echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD - $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD - echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD - $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&AS_MESSAGE_LOG_FD - elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - ]) - case $host_os in - rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - 10.[[012]][[,.]]*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test yes = "$lt_cv_apple_cc_single_mod"; then - _lt_dar_single_mod='$single_module' - fi - if test yes = "$lt_cv_ld_exported_symbols_list"; then - _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' - fi - if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac -]) - - -# _LT_DARWIN_LINKER_FEATURES([TAG]) -# --------------------------------- -# Checks for linker and compiler features on darwin -m4_defun([_LT_DARWIN_LINKER_FEATURES], -[ - m4_require([_LT_REQUIRED_DARWIN_CHECKS]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - if test yes = "$lt_cv_ld_force_load"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], - [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='' - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined - case $cc_basename in - ifort*|nagfor*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test yes = "$_lt_dar_can_shared"; then - output_verbose_link_cmd=func_echo_all - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" - _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" - m4_if([$1], [CXX], -[ if test yes != "$lt_cv_apple_cc_single_mod"; then - _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" - fi -],[]) - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -]) - -# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) -# ---------------------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -# Store the results from the different compilers for each TAGNAME. -# Allow to override them for all tags through lt_cv_aix_libpath. -m4_defun([_LT_SYS_MODULE_PATH_AIX], -[m4_require([_LT_DECL_SED])dnl -if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], - [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ - lt_aix_libpath_sed='[ - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }]' - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi],[]) - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib - fi - ]) - aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) -fi -])# _LT_SYS_MODULE_PATH_AIX - - -# _LT_SHELL_INIT(ARG) -# ------------------- -m4_define([_LT_SHELL_INIT], -[m4_divert_text([M4SH-INIT], [$1 -])])# _LT_SHELL_INIT - - - -# _LT_PROG_ECHO_BACKSLASH -# ----------------------- -# Find how we can fake an echo command that does not interpret backslash. -# In particular, with Autoconf 2.60 or later we add some code to the start -# of the generated configure script that will find a shell with a builtin -# printf (that we can use as an echo command). -m4_defun([_LT_PROG_ECHO_BACKSLASH], -[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -AC_MSG_CHECKING([how to print strings]) -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$[]1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - -case $ECHO in - printf*) AC_MSG_RESULT([printf]) ;; - print*) AC_MSG_RESULT([print -r]) ;; - *) AC_MSG_RESULT([cat]) ;; -esac - -m4_ifdef([_AS_DETECT_SUGGESTED], -[_AS_DETECT_SUGGESTED([ - test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test "X`printf %s $ECHO`" = "X$ECHO" \ - || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) - -_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) -])# _LT_PROG_ECHO_BACKSLASH - - -# _LT_WITH_SYSROOT -# ---------------- -AC_DEFUN([_LT_WITH_SYSROOT], -[AC_MSG_CHECKING([for sysroot]) -AC_ARG_WITH([sysroot], -[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@], - [Search for dependent libraries within DIR (or the compiler's sysroot - if not specified).])], -[], [with_sysroot=no]) - -dnl lt_sysroot will always be passed unquoted. We quote it here -dnl in case the user passed a directory name. -lt_sysroot= -case $with_sysroot in #( - yes) - if test yes = "$GCC"; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - AC_MSG_RESULT([$with_sysroot]) - AC_MSG_ERROR([The sysroot must be an absolute path.]) - ;; -esac - - AC_MSG_RESULT([${lt_sysroot:-no}]) -_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -[dependent libraries, and where our libraries should be installed.])]) - -# _LT_ENABLE_LOCK -# --------------- -m4_defun([_LT_ENABLE_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AS_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test no = "$enable_libtool_lock" || enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out what ABI is being produced by ac_compile, and set mode - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE=32 - ;; - *ELF-64*) - HPUX_IA64_MODE=64 - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test yes = "$lt_cv_prog_gnu_ld"; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -mips64*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - emul=elf - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - emul="${emul}32" - ;; - *64-bit*) - emul="${emul}64" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *MSB*) - emul="${emul}btsmip" - ;; - *LSB*) - emul="${emul}ltsmip" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *N32*) - emul="${emul}n32" - ;; - esac - LD="${LD-ld} -m $emul" - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. Note that the listed cases only cover the - # situations where additional linker options are needed (such as when - # doing 32-bit compilation for a host where ld defaults to 64-bit, or - # vice versa); the common cases where no linker options are needed do - # not appear in the list. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - case `/usr/bin/file conftest.o` in - *x86-64*) - LD="${LD-ld} -m elf32_x86_64" - ;; - *) - LD="${LD-ld} -m elf_i386" - ;; - esac - ;; - powerpc64le-*linux*) - LD="${LD-ld} -m elf32lppclinux" - ;; - powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - powerpcle-*linux*) - LD="${LD-ld} -m elf64lppc" - ;; - powerpc-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS=$CFLAGS - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test yes != "$lt_cv_cc_needs_belf"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS=$SAVE_CFLAGS - fi - ;; -*-*solaris*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*|x86_64-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD=${LD-ld}_sol2 - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks=$enable_libtool_lock -])# _LT_ENABLE_LOCK - - -# _LT_PROG_AR -# ----------- -m4_defun([_LT_PROG_AR], -[AC_CHECK_TOOLS(AR, [ar], false) -: ${AR=ar} -: ${AR_FLAGS=cru} -_LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) - -AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], - [lt_cv_ar_at_file=no - AC_COMPILE_IFELSE([AC_LANG_PROGRAM], - [echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' - AC_TRY_EVAL([lt_ar_try]) - if test 0 -eq "$ac_status"; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - AC_TRY_EVAL([lt_ar_try]) - if test 0 -ne "$ac_status"; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - ]) - ]) - -if test no = "$lt_cv_ar_at_file"; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi -_LT_DECL([], [archiver_list_spec], [1], - [How to feed a file listing to the archiver]) -])# _LT_PROG_AR - - -# _LT_CMD_OLD_ARCHIVE -# ------------------- -m4_defun([_LT_CMD_OLD_ARCHIVE], -[_LT_PROG_AR - -AC_CHECK_TOOL(STRIP, strip, :) -test -z "$STRIP" && STRIP=: -_LT_DECL([], [STRIP], [1], [A symbol stripping program]) - -AC_CHECK_TOOL(RANLIB, ranlib, :) -test -z "$RANLIB" && RANLIB=: -_LT_DECL([], [RANLIB], [1], - [Commands used to install an old-style archive]) - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - bitrig* | openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac -_LT_DECL([], [old_postinstall_cmds], [2]) -_LT_DECL([], [old_postuninstall_cmds], [2]) -_LT_TAGDECL([], [old_archive_cmds], [2], - [Commands used to build an old-style archive]) -_LT_DECL([], [lock_old_archive_extraction], [0], - [Whether to use a lock for old archive extraction]) -])# _LT_CMD_OLD_ARCHIVE - - -# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([_LT_COMPILER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $RM conftest* -]) - -if test yes = "[$]$2"; then - m4_if([$5], , :, [$5]) -else - m4_if([$6], , :, [$6]) -fi -])# _LT_COMPILER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) - - -# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------- -# Check whether the given linker option works -AC_DEFUN([_LT_LINKER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS -]) - -if test yes = "[$]$2"; then - m4_if([$4], , :, [$4]) -else - m4_if([$5], , :, [$5]) -fi -])# _LT_LINKER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) - - -# LT_CMD_MAX_LEN -#--------------- -AC_DEFUN([LT_CMD_MAX_LEN], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring=ABCD - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test X`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test 17 != "$i" # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n "$lt_cv_sys_max_cmd_len"; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -max_cmd_len=$lt_cv_sys_max_cmd_len -_LT_DECL([], [max_cmd_len], [0], - [What is the maximum length of a command?]) -])# LT_CMD_MAX_LEN - -# Old name: -AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) - - -# _LT_HEADER_DLFCN -# ---------------- -m4_defun([_LT_HEADER_DLFCN], -[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl -])# _LT_HEADER_DLFCN - - -# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ---------------------------------------------------------------- -m4_defun([_LT_TRY_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test yes = "$cross_compiling"; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -[#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -}] -_LT_EOF - if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_TRY_DLOPEN_SELF - - -# LT_SYS_DLOPEN_SELF -# ------------------ -AC_DEFUN([LT_SYS_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test yes != "$enable_dlopen"; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen=load_add_on - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen=LoadLibrary - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[ - lt_cv_dlopen=dyld - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - tpf*) - # Don't try to run any link tests for TPF. We know it's impossible - # because TPF is a cross-compiler, and we know how we open DSOs. - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - lt_cv_dlopen_self=no - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen=shl_load], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen=dlopen], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test no = "$lt_cv_dlopen"; then - enable_dlopen=no - else - enable_dlopen=yes - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS=$CPPFLAGS - test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS=$LDFLAGS - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS=$LIBS - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test yes = "$lt_cv_dlopen_self"; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS=$save_CPPFLAGS - LDFLAGS=$save_LDFLAGS - LIBS=$save_LIBS - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -_LT_DECL([dlopen_support], [enable_dlopen], [0], - [Whether dlopen is supported]) -_LT_DECL([dlopen_self], [enable_dlopen_self], [0], - [Whether dlopen of programs is supported]) -_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], - [Whether dlopen of statically linked programs is supported]) -])# LT_SYS_DLOPEN_SELF - -# Old name: -AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) - - -# _LT_COMPILER_C_O([TAGNAME]) -# --------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler. -# This macro does not hard code the compiler like AC_PROG_CC_C_O. -m4_defun([_LT_COMPILER_C_O], -[m4_require([_LT_DECL_SED])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -]) -_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], - [Does compiler simultaneously support -c and -o options?]) -])# _LT_COMPILER_C_O - - -# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -# ---------------------------------- -# Check to see if we can do hard links to lock some files if needed -m4_defun([_LT_COMPILER_FILE_LOCKS], -[m4_require([_LT_ENABLE_LOCK])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_COMPILER_C_O([$1]) - -hard_links=nottested -if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test no = "$hard_links"; then - AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) -])# _LT_COMPILER_FILE_LOCKS - - -# _LT_CHECK_OBJDIR -# ---------------- -m4_defun([_LT_CHECK_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -_LT_DECL([], [objdir], [0], - [The name of the directory that contains temporary libtool files])dnl -m4_pattern_allow([LT_OBJDIR])dnl -AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/", - [Define to the sub-directory where libtool stores uninstalled libraries.]) -])# _LT_CHECK_OBJDIR - - -# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -# -------------------------------------- -# Check hardcoding attributes. -m4_defun([_LT_LINKER_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || - test -n "$_LT_TAGVAR(runpath_var, $1)" || - test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then - - # We can hardcode non-existent directories. - if test no != "$_LT_TAGVAR(hardcode_direct, $1)" && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" && - test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then - # Linking always hardcodes the temporary library directory. - _LT_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) - -if test relink = "$_LT_TAGVAR(hardcode_action, $1)" || - test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then - # Fast installation is not supported - enable_fast_install=no -elif test yes = "$shlibpath_overrides_runpath" || - test no = "$enable_shared"; then - # Fast installation is not necessary - enable_fast_install=needless -fi -_LT_TAGDECL([], [hardcode_action], [0], - [How to hardcode a shared library path into an executable]) -])# _LT_LINKER_HARDCODE_LIBPATH - - -# _LT_CMD_STRIPLIB -# ---------------- -m4_defun([_LT_CMD_STRIPLIB], -[m4_require([_LT_DECL_EGREP]) -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP"; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) -_LT_DECL([], [striplib], [1]) -])# _LT_CMD_STRIPLIB - - -# _LT_PREPARE_MUNGE_PATH_LIST -# --------------------------- -# Make sure func_munge_path_list() is defined correctly. -m4_defun([_LT_PREPARE_MUNGE_PATH_LIST], -[[# func_munge_path_list VARIABLE PATH -# ----------------------------------- -# VARIABLE is name of variable containing _space_ separated list of -# directories to be munged by the contents of PATH, which is string -# having a format: -# "DIR[:DIR]:" -# string "DIR[ DIR]" will be prepended to VARIABLE -# ":DIR[:DIR]" -# string "DIR[ DIR]" will be appended to VARIABLE -# "DIRP[:DIRP]::[DIRA:]DIRA" -# string "DIRP[ DIRP]" will be prepended to VARIABLE and string -# "DIRA[ DIRA]" will be appended to VARIABLE -# "DIR[:DIR]" -# VARIABLE will be replaced by "DIR[ DIR]" -func_munge_path_list () -{ - case x@S|@2 in - x) - ;; - *:) - eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\" - ;; - x:*) - eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\" - ;; - *::*) - eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" - eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\" - ;; - *) - eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\" - ;; - esac -} -]])# _LT_PREPARE_PATH_LIST - - -# _LT_SYS_DYNAMIC_LINKER([TAG]) -# ----------------------------- -# PORTME Fill in your ld.so characteristics -m4_defun([_LT_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_OBJDUMP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl -AC_MSG_CHECKING([dynamic linker characteristics]) -m4_if([$1], - [], [ -if test yes = "$GCC"; then - case $host_os in - darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; - *) lt_awk_arg='/^libraries:/' ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; - *) lt_sed_strip_eq='s|=/|/|g' ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary... - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - # ...but if some path component already ends with the multilib dir we assume - # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). - case "$lt_multi_os_dir; $lt_search_path_spec " in - "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) - lt_multi_os_dir= - ;; - esac - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" - elif test -n "$lt_multi_os_dir"; then - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS = " "; FS = "/|\n";} { - lt_foo = ""; - lt_count = 0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo = "/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=.so -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -AC_ARG_VAR([LT_SYS_LIBRARY_PATH], -[User-defined run-time library search path.]) - -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='$libname$release$shared_ext$major' - ;; - -aix[[4-9]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test ia64 = "$host_cpu"; then - # AIX 5 supports IA64 - library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line '#! .'. This would cause the generated library to - # depend on '.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # Using Import Files as archive members, it is possible to support - # filename-based versioning of shared library archives on AIX. While - # this would work for both with and without runtime linking, it will - # prevent static linking of such archives. So we do filename-based - # shared library versioning with .so extension only, which is used - # when both runtime linking and shared linking is enabled. - # Unfortunately, runtime linking may impact performance, so we do - # not want this to be the default eventually. Also, we use the - # versioned .so libs for executables only if there is the -brtl - # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. - # To allow for filename-based versioning support, we need to create - # libNAME.so.V as an archive file, containing: - # *) an Import File, referring to the versioned filename of the - # archive as well as the shared archive member, telling the - # bitwidth (32 or 64) of that shared object, and providing the - # list of exported symbols of that shared object, eventually - # decorated with the 'weak' keyword - # *) the shared object with the F_LOADONLY flag set, to really avoid - # it being seen by the linker. - # At run time we better use the real file rather than another symlink, - # but for link time we create the symlink libNAME.so -> libNAME.so.V - - case $with_aix_soname,$aix_use_runtimelinking in - # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - aix,yes) # traditional libtool - dynamic_linker='AIX unversionable lib.so' - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - aix,no) # traditional AIX only - dynamic_linker='AIX lib.a[(]lib.so.V[)]' - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - ;; - svr4,*) # full svr4 only - dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,yes) # both, prefer svr4 - dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # unpreferred sharedlib libNAME.a needs extra handling - postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' - postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,no) # both, prefer aix - dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]" - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling - postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' - postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' - ;; - esac - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='$libname$shared_ext' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' - library_names_spec='$libname.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec=$LIB - if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' - soname_spec='$libname$release$major$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[23]].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - if test 32 = "$HPUX_IA64_MODE"; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - sys_lib_dlsearch_path_spec=/usr/lib/hpux32 - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - sys_lib_dlsearch_path_spec=/usr/lib/hpux64 - fi - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[[3-9]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test yes = "$lt_cv_prog_gnu_ld"; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" - sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -linux*android*) - version_type=none # Android doesn't support versioned libraries. - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext' - soname_spec='$libname$release$shared_ext' - finish_cmds= - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - dynamic_linker='Android linker' - # Don't embed -rpath directories since the linker doesn't support them. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], - [lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ - LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], - [lt_cv_shlibpath_overrides_runpath=yes])]) - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - ]) - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Add ABI-specific directories to the system library path. - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" - - # Ideally, we could use ldconfig to report *all* directores which are - # searched for libraries, however this is still not possible. Aside from not - # being certain /sbin/ldconfig is available, command - # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, - # even though it is searched at run-time. Try to do the best guess by - # appending ld.so.conf contents (and includes) to the search path. - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd* | bitrig*) - version_type=sunos - sys_lib_dlsearch_path_spec=/usr/lib - need_lib_prefix=no - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - need_version=no - else - need_version=yes - fi - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -os2*) - libname_spec='$name' - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - # OS/2 can only load a DLL with a base name of 8 characters or less. - soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; - v=$($ECHO $release$versuffix | tr -d .-); - n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); - $ECHO $n$v`$shared_ext' - library_names_spec='${libname}_dll.$libext' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=BEGINLIBPATH - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test yes = "$with_gnu_ld"; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec; then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' - soname_spec='$libname$shared_ext.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=sco - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test yes = "$with_gnu_ld"; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test no = "$dynamic_linker" && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test yes = "$GCC"; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then - sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec -fi - -if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then - sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec -fi - -# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... -configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec - -# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code -func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" - -# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool -configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH - -_LT_DECL([], [variables_saved_for_relink], [1], - [Variables whose values should be saved in libtool wrapper scripts and - restored at link time]) -_LT_DECL([], [need_lib_prefix], [0], - [Do we need the "lib" prefix for modules?]) -_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) -_LT_DECL([], [version_type], [0], [Library versioning type]) -_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) -_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) -_LT_DECL([], [shlibpath_overrides_runpath], [0], - [Is shlibpath searched before the hard-coded library search path?]) -_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) -_LT_DECL([], [library_names_spec], [1], - [[List of archive names. First name is the real one, the rest are links. - The last name is the one that the linker finds with -lNAME]]) -_LT_DECL([], [soname_spec], [1], - [[The coded name of the library, if different from the real name]]) -_LT_DECL([], [install_override_mode], [1], - [Permission mode override for installation of shared libraries]) -_LT_DECL([], [postinstall_cmds], [2], - [Command to use after installation of a shared archive]) -_LT_DECL([], [postuninstall_cmds], [2], - [Command to use after uninstallation of a shared archive]) -_LT_DECL([], [finish_cmds], [2], - [Commands used to finish a libtool library installation in a directory]) -_LT_DECL([], [finish_eval], [1], - [[As "finish_cmds", except a single script fragment to be evaled but - not shown]]) -_LT_DECL([], [hardcode_into_libs], [0], - [Whether we should hardcode library paths into libraries]) -_LT_DECL([], [sys_lib_search_path_spec], [2], - [Compile-time system search path for libraries]) -_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2], - [Detected run-time system search path for libraries]) -_LT_DECL([], [configure_time_lt_sys_library_path], [2], - [Explicit LT_SYS_LIBRARY_PATH set during ./configure time]) -])# _LT_SYS_DYNAMIC_LINKER - - -# _LT_PATH_TOOL_PREFIX(TOOL) -# -------------------------- -# find a file program that can recognize shared library -AC_DEFUN([_LT_PATH_TOOL_PREFIX], -[m4_require([_LT_DECL_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="m4_if([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$1"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac]) -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -_LT_DECL([], [MAGIC_CMD], [0], - [Used to examine libraries when file_magic_cmd begins with "file"])dnl -])# _LT_PATH_TOOL_PREFIX - -# Old name: -AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) - - -# _LT_PATH_MAGIC -# -------------- -# find a file program that can recognize a shared library -m4_defun([_LT_PATH_MAGIC], -[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# _LT_PATH_MAGIC - - -# LT_PATH_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([LT_PATH_LD], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PROG_ECHO_BACKSLASH])dnl - -AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test no = "$withval" || with_gnu_ld=yes], - [with_gnu_ld=no])dnl - -ac_prog=ld -if test yes = "$GCC"; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return, which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD=$ac_prog - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test yes = "$with_gnu_ld"; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD=$ac_dir/$ac_prog - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 conftest.i -cat conftest.i conftest.i >conftest2.i -: ${lt_DD:=$DD} -AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd], -[if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: -fi]) -rm -f conftest.i conftest2.i conftest.out]) -])# _LT_PATH_DD - - -# _LT_CMD_TRUNCATE -# ---------------- -# find command to truncate a binary pipe -m4_defun([_LT_CMD_TRUNCATE], -[m4_require([_LT_PATH_DD]) -AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin], -[printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -lt_cv_truncate_bin= -if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" -fi -rm -f conftest.i conftest2.i conftest.out -test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"]) -_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1], - [Command to truncate a binary pipe]) -])# _LT_CMD_TRUNCATE - - -# _LT_CHECK_MAGIC_METHOD -# ---------------------- -# how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_MAGIC_METHOD], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -AC_CACHE_CHECK([how to recognize dependent libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# 'unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# that responds to the $file_magic_cmd with a given extended regex. -# If you have 'file' or equivalent on your system and you're not sure -# whether 'pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[[4-9]]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[[45]]*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[[3-9]]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd* | bitrig*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -os2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -_LT_DECL([], [deplibs_check_method], [1], - [Method to check whether dependent libraries are shared objects]) -_LT_DECL([], [file_magic_cmd], [1], - [Command to use when deplibs_check_method = "file_magic"]) -_LT_DECL([], [file_magic_glob], [1], - [How to find potential files when deplibs_check_method = "file_magic"]) -_LT_DECL([], [want_nocaseglob], [1], - [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) -])# _LT_CHECK_MAGIC_METHOD - - -# LT_PATH_NM -# ---------- -# find the pathname to a BSD- or MS-compatible name lister -AC_DEFUN([LT_PATH_NM], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM=$NM -else - lt_nm_to_check=${ac_tool_prefix}nm - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/$lt_tmp_nm - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the 'sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty - case $build_os in - mingw*) lt_bad_file=conftest.nm/nofile ;; - *) lt_bad_file=/dev/null ;; - esac - case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in - *$lt_bad_file* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break 2 - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break 2 - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS=$lt_save_ifs - done - : ${lt_cv_path_NM=no} -fi]) -if test no != "$lt_cv_path_NM"; then - NM=$lt_cv_path_NM -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols -headers" - ;; - *) - DUMPBIN=: - ;; - esac - fi - AC_SUBST([DUMPBIN]) - if test : != "$DUMPBIN"; then - NM=$DUMPBIN - fi -fi -test -z "$NM" && NM=nm -AC_SUBST([NM]) -_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - -AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], - [lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) - cat conftest.out >&AS_MESSAGE_LOG_FD - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest*]) -])# LT_PATH_NM - -# Old names: -AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) -AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_PROG_NM], []) -dnl AC_DEFUN([AC_PROG_NM], []) - -# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -# -------------------------------- -# how to determine the name of the shared library -# associated with a specific link library. -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -m4_require([_LT_DECL_DLLTOOL]) -AC_CACHE_CHECK([how to associate runtime and link libraries], -lt_cv_sharedlib_from_linklib_cmd, -[lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh; - # decide which one to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd=$ECHO - ;; -esac -]) -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - -_LT_DECL([], [sharedlib_from_linklib_cmd], [1], - [Command to associate shared and link libraries]) -])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB - - -# _LT_PATH_MANIFEST_TOOL -# ---------------------- -# locate the manifest tool -m4_defun([_LT_PATH_MANIFEST_TOOL], -[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], - [lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&AS_MESSAGE_LOG_FD - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest*]) -if test yes != "$lt_cv_path_mainfest_tool"; then - MANIFEST_TOOL=: -fi -_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl -])# _LT_PATH_MANIFEST_TOOL - - -# _LT_DLL_DEF_P([FILE]) -# --------------------- -# True iff FILE is a Windows DLL '.def' file. -# Keep in sync with func_dll_def_p in the libtool script -AC_DEFUN([_LT_DLL_DEF_P], -[dnl - test DEF = "`$SED -n dnl - -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace - -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments - -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl - -e q dnl Only consider the first "real" line - $1`" dnl -])# _LT_DLL_DEF_P - - -# LT_LIB_M -# -------- -# check for math library -AC_DEFUN([LT_LIB_M], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw) - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM=-lm) - ;; -esac -AC_SUBST([LIBM]) -])# LT_LIB_M - -# Old name: -AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_CHECK_LIBM], []) - - -# _LT_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------- -m4_defun([_LT_COMPILER_NO_RTTI], -[m4_require([_LT_TAG_COMPILER])dnl - -_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test yes = "$GCC"; then - case $cc_basename in - nvcc*) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; - *) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; - esac - - _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], - [Compiler flag to turn off builtin functions]) -])# _LT_COMPILER_NO_RTTI - - -# _LT_CMD_GLOBAL_SYMBOLS -# ---------------------- -m4_defun([_LT_CMD_GLOBAL_SYMBOLS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([LT_PATH_NM])dnl -AC_REQUIRE([LT_PATH_LD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_TAG_COMPILER])dnl - -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) - if test ia64 = "$host_cpu"; then - symcode='[[ABCDEGRST]]' - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Gets list of data symbols to import. - lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" - # Adjust the below global symbol transforms to fixup imported variables. - lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" - lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" - lt_c_name_lib_hook="\ - -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ - -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" -else - # Disable hooks by default. - lt_cv_sys_global_symbol_to_import= - lt_cdecl_hook= - lt_c_name_hook= - lt_c_name_lib_hook= -fi - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n"\ -$lt_cdecl_hook\ -" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ -$lt_c_name_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" - -# Transform an extracted symbol line into symbol name with lib prefix and -# symbol address. -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ -$lt_c_name_lib_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function, - # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK ['"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ -" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ -" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ -" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ -" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx]" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE -/* DATA imports from DLLs on WIN32 can't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT@&t@_DLSYM_CONST -#elif defined __osf__ -/* This system does not cope well with relocations in const data. */ -# define LT@&t@_DLSYM_CONST -#else -# define LT@&t@_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT@&t@_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[[]] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS=conftstm.$ac_objext - CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test yes = "$pipe_works"; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - -_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], - [Take the output of nm and produce a listing of raw symbols and C names]) -_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], - [Transform the output of nm in a proper C declaration]) -_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1], - [Transform the output of nm into a list of symbols to manually relocate]) -_LT_DECL([global_symbol_to_c_name_address], - [lt_cv_sys_global_symbol_to_c_name_address], [1], - [Transform the output of nm in a C name address pair]) -_LT_DECL([global_symbol_to_c_name_address_lib_prefix], - [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], - [Transform the output of nm in a C name address pair when lib prefix is needed]) -_LT_DECL([nm_interface], [lt_cv_nm_interface], [1], - [The name lister interface]) -_LT_DECL([], [nm_file_list_spec], [1], - [Specify filename containing input files for $NM]) -]) # _LT_CMD_GLOBAL_SYMBOLS - - -# _LT_COMPILER_PIC([TAGNAME]) -# --------------------------- -m4_defun([_LT_COMPILER_PIC], -[m4_require([_LT_TAG_COMPILER])dnl -_LT_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_TAGVAR(lt_prog_compiler_static, $1)= - -m4_if([$1], [CXX], [ - # C++ specific cases for pic, static, wl, etc. - if test yes = "$GXX"; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - case $host_os in - os2*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' - ;; - esac - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix[[4-9]]*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - dgux*) - case $cc_basename in - ec++*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' - if test ia64 != "$host_cpu"; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - ecpc* ) - # old Intel C++ for x86_64, which still supported -KPIC. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - icpc* ) - # Intel C++, used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) - # IBM XL 8.0, 9.0 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx*) - # Digital/Compaq C++ - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - vxworks*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test yes = "$GCC"; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - case $host_os in - os2*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' - ;; - esac - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' - if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - case $cc_basename in - nagfor*) - # NAG Fortran compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - case $host_os in - os2*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' - ;; - esac - ;; - - hpux9* | hpux10* | hpux11*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - # old Intel for x86_64, which still supported -KPIC. - ecc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' - _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' - ;; - nagfor*) - # NAG Fortran compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - *Sun\ F* | *Sun*Fortran*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - *Intel*\ [[CF]]*Compiler*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - *Portland\ Group*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - rdos*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -case $host_os in - # For platforms that do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" - ;; -esac - -AC_CACHE_CHECK([for $compiler option to produce PIC], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], - [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], - [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], - [Additional compiler flags for building library objects]) - -_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], - [How to pass a linker flag through the compiler]) -# -# Check to make sure the static flag actually works. -# -wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" -_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) -_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], - [Compiler flag to prevent dynamic linking]) -])# _LT_COMPILER_PIC - - -# _LT_LINKER_SHLIBS([TAGNAME]) -# ---------------------------- -# See if the linker supports building shared libraries. -m4_defun([_LT_LINKER_SHLIBS], -[AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -m4_if([$1], [CXX], [ - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - case $host_os in - aix[[4-9]]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to GNU nm, but means don't demangle to AIX nm. - # Without the "-l" option, or with the "-B" option, AIX nm treats - # weak defined symbols like other global defined symbols, whereas - # GNU nm marks them as "W". - # While the 'weak' keyword is ignored in the Export File, we need - # it in the Import File for the 'aix-soname' feature, so we have - # to replace the "-B" option with "-P" for AIX nm. - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds - ;; - cygwin* | mingw* | cegcc*) - case $cc_basename in - cl*) - _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - ;; - esac - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -], [ - runpath_var= - _LT_TAGVAR(allow_undefined_flag, $1)= - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(archive_cmds, $1)= - _LT_TAGVAR(archive_expsym_cmds, $1)= - _LT_TAGVAR(compiler_needs_object, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(hardcode_automatic, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(inherit_rpath, $1)=no - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(module_cmds, $1)= - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(old_archive_from_new_cmds, $1)= - _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_TAGVAR(thread_safe_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ' (' and ')$', so one must not match beginning or - # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', - # as well as any symbol that contains 'd'. - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. -dnl Note also adjust exclude_expsyms for C++ above. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test yes != "$GCC"; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd* | bitrig*) - with_gnu_ld=no - ;; - esac - - _LT_TAGVAR(ld_shlibs, $1)=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test yes = "$with_gnu_ld"; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; - *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test yes = "$lt_use_gnu_ld_interface"; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='$wl' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[[3-9]]*) - # On AIX/PPC, the GNU linker is very broken - if test ia64 != "$host_cpu"; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file, use it as - # is; otherwise, prepend EXPORTS... - _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - shrext_cmds=.dll - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test linux-dietlibc = "$host_os"; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test no = "$tmp_diet" - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - _LT_TAGVAR(whole_archive_flag_spec, $1)= - tmp_sharedflag='--shared' ;; - nagfor*) # NAGFOR 5.3 - tmp_sharedflag='-Wl,-shared' ;; - xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - - if test yes = "$supports_anon_versioning"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - tcc*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic' - ;; - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test yes = "$supports_anon_versioning"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then - runpath_var= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix[[4-9]]*) - if test ia64 = "$host_cpu"; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag= - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to GNU nm, but means don't demangle to AIX nm. - # Without the "-l" option, or with the "-B" option, AIX nm treats - # weak defined symbols like other global defined symbols, whereas - # GNU nm marks them as "W". - # While the 'weak' keyword is ignored in the Export File, we need - # it in the Import File for the 'aix-soname' feature, so we have - # to replace the "-B" option with "-P" for AIX nm. - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # have runtime linking enabled, and use it for executables. - # For shared libraries, we enable/disable runtime linking - # depending on the kind of the shared library created - - # when "with_aix_soname,aix_use_runtimelinking" is: - # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables - # "aix,yes" lib.so shared, rtl:yes, for executables - # lib.a static archive - # "both,no" lib.so.V(shr.o) shared, rtl:yes - # lib.a(lib.so.V) shared, rtl:no, for executables - # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a(lib.so.V) shared, rtl:no - # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a static archive - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then - aix_use_runtimelinking=yes - break - fi - done - if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then - # With aix-soname=svr4, we create the lib.so.V shared archives only, - # so we don't have lib.a shared libs to link our executables. - # We have to force runtime linking in this case. - aix_use_runtimelinking=yes - LDFLAGS="$LDFLAGS -Wl,-brtl" - fi - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='$wl-f,' - case $with_aix_soname,$aix_use_runtimelinking in - aix,*) ;; # traditional, no import file - svr4,* | *,yes) # use import file - # The Import File defines what to hardcode. - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - ;; - esac - - if test yes = "$GCC"; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`$CC -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test yes = "$aix_use_runtimelinking"; then - shared_flag="$shared_flag "'$wl-G' - fi - # Need to ensure runtime linking is disabled for the traditional - # shared library, or the linker may eventually find shared libraries - # /with/ Import File - we do not want to mix them. - shared_flag_aix='-shared' - shared_flag_svr4='-shared $wl-G' - else - # not using gcc - if test ia64 = "$host_cpu"; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test yes = "$aix_use_runtimelinking"; then - shared_flag='$wl-G' - else - shared_flag='$wl-bM:SRE' - fi - shared_flag_aix='$wl-bM:SRE' - shared_flag_svr4='$wl-G' - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag - else - if test ia64 = "$host_cpu"; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' - if test yes = "$with_gnu_ld"; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' - # -brtl affects multiple linker settings, -berok does not and is overridden later - compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' - if test svr4 != "$with_aix_soname"; then - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' - fi - if test aix != "$with_aix_soname"; then - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' - else - # used by -dlpreopen to get the symbols - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' - fi - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - bsdi[[45]]*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then - cp "$export_symbols" "$output_objdir/$soname.def"; - echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; - else - $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile=$lt_outputfile.exe - lt_tool_outputfile=$lt_tool_outputfile.exe - ;; - esac~ - if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - esac - ;; - - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test yes = "$GCC"; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - ;; - - hpux10*) - if test yes,no = "$GCC,$with_gnu_ld"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test no = "$with_gnu_ld"; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test yes,no = "$GCC,$with_gnu_ld"; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - m4_if($1, [], [ - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - _LT_LINKER_OPTION([if $CC understands -b], - _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], - [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) - ;; - esac - fi - if test no = "$with_gnu_ld"; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test yes = "$GCC"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], - [lt_cv_irix_exported_symbol], - [save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" - AC_LINK_IFELSE( - [AC_LANG_SOURCE( - [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], - [C++], [[int foo (void) { return 0; }]], - [Fortran 77], [[ - subroutine foo - end]], - [Fortran], [[ - subroutine foo - end]])])], - [lt_cv_irix_exported_symbol=yes], - [lt_cv_irix_exported_symbol=no]) - LDFLAGS=$save_LDFLAGS]) - if test yes = "$lt_cv_irix_exported_symbol"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' - fi - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - linux*) - case $cc_basename in - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - _LT_TAGVAR(ld_shlibs, $1)=yes - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *nto* | *qnx*) - ;; - - openbsd* | bitrig*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - fi - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - shrext_cmds=.dll - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - osf3*) - if test yes = "$GCC"; then - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test yes = "$GCC"; then - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test yes = "$GCC"; then - wlarc='$wl' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='$wl' - _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands '-z linker_flag'. GCC discards it without '$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test yes = "$GCC"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - fi - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test sequent = "$host_vendor"; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We CANNOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - if test sni = "$host_vendor"; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym' - ;; - esac - fi - fi -]) -AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no - -_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld - -_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl -_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl -_LT_DECL([], [extract_expsyms_cmds], [2], - [The commands to extract the exported symbol list from a shared archive]) - -# -# Do we need to explicitly link libc? -# -case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test yes,yes = "$GCC,$enable_shared"; then - case $_LT_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_CACHE_CHECK([whether -lc should be explicitly linked in], - [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), - [$RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) - _LT_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no - else - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - ]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) - ;; - esac - fi - ;; -esac - -_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], - [Whether or not to add -lc for building shared libraries]) -_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], - [enable_shared_with_static_runtimes], [0], - [Whether or not to disallow shared libs when runtime libs are static]) -_LT_TAGDECL([], [export_dynamic_flag_spec], [1], - [Compiler flag to allow reflexive dlopens]) -_LT_TAGDECL([], [whole_archive_flag_spec], [1], - [Compiler flag to generate shared objects directly from archives]) -_LT_TAGDECL([], [compiler_needs_object], [1], - [Whether the compiler copes with passing no objects directly]) -_LT_TAGDECL([], [old_archive_from_new_cmds], [2], - [Create an old-style archive from a shared archive]) -_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], - [Create a temporary old-style archive to link instead of a shared archive]) -_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) -_LT_TAGDECL([], [archive_expsym_cmds], [2]) -_LT_TAGDECL([], [module_cmds], [2], - [Commands used to build a loadable module if different from building - a shared archive.]) -_LT_TAGDECL([], [module_expsym_cmds], [2]) -_LT_TAGDECL([], [with_gnu_ld], [1], - [Whether we are building with GNU ld or not]) -_LT_TAGDECL([], [allow_undefined_flag], [1], - [Flag that allows shared libraries with undefined symbols to be built]) -_LT_TAGDECL([], [no_undefined_flag], [1], - [Flag that enforces no undefined symbols]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], - [Flag to hardcode $libdir into a binary during linking. - This must work even if $libdir does not exist]) -_LT_TAGDECL([], [hardcode_libdir_separator], [1], - [Whether we need a single "-rpath" flag with a separated argument]) -_LT_TAGDECL([], [hardcode_direct], [0], - [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes - DIR into the resulting binary]) -_LT_TAGDECL([], [hardcode_direct_absolute], [0], - [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes - DIR into the resulting binary and the resulting library dependency is - "absolute", i.e impossible to change by setting $shlibpath_var if the - library is relocated]) -_LT_TAGDECL([], [hardcode_minus_L], [0], - [Set to "yes" if using the -LDIR flag during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_shlibpath_var], [0], - [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_automatic], [0], - [Set to "yes" if building a shared library automatically hardcodes DIR - into the library and all subsequent libraries and executables linked - against it]) -_LT_TAGDECL([], [inherit_rpath], [0], - [Set to yes if linker adds runtime paths of dependent libraries - to runtime path list]) -_LT_TAGDECL([], [link_all_deplibs], [0], - [Whether libtool must link a program against all its dependency libraries]) -_LT_TAGDECL([], [always_export_symbols], [0], - [Set to "yes" if exported symbols are required]) -_LT_TAGDECL([], [export_symbols_cmds], [2], - [The commands to list exported symbols]) -_LT_TAGDECL([], [exclude_expsyms], [1], - [Symbols that should not be listed in the preloaded symbols]) -_LT_TAGDECL([], [include_expsyms], [1], - [Symbols that must always be exported]) -_LT_TAGDECL([], [prelink_cmds], [2], - [Commands necessary for linking programs (against libraries) with templates]) -_LT_TAGDECL([], [postlink_cmds], [2], - [Commands necessary for finishing linking programs]) -_LT_TAGDECL([], [file_list_spec], [1], - [Specify filename containing input files]) -dnl FIXME: Not yet implemented -dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], -dnl [Compiler flag to generate thread safe objects]) -])# _LT_LINKER_SHLIBS - - -# _LT_LANG_C_CONFIG([TAG]) -# ------------------------ -# Ensure that the configuration variables for a C compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_C_CONFIG], -[m4_require([_LT_DECL_EGREP])dnl -lt_save_CC=$CC -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_TAG_COMPILER -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - LT_SYS_DLOPEN_SELF - _LT_CMD_STRIPLIB - - # Report what library types will actually be built - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[[4-9]]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_CONFIG($1) -fi -AC_LANG_POP -CC=$lt_save_CC -])# _LT_LANG_C_CONFIG - - -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_CXX_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl -if test -n "$CXX" && ( test no != "$CXX" && - ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || - (test g++ != "$CXX"))); then - AC_PROG_CXXCPP -else - _lt_caught_CXX_error=yes -fi - -AC_LANG_PUSH(C++) -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(compiler_needs_object, $1)=no -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the CXX compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test yes != "$_lt_caught_CXX_error"; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="int some_variable = 0;" - - # Code to be used in simple link tests - lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_CFLAGS=$CFLAGS - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX - lt_save_with_gnu_ld=$with_gnu_ld - lt_save_path_LD=$lt_cv_path_LD - if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx - else - $as_unset lt_cv_prog_gnu_ld - fi - if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX - else - $as_unset lt_cv_path_LD - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} - CFLAGS=$CXXFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - # We don't want -fno-exception when compiling C++ code, so set the - # no_builtin_flag separately - if test yes = "$GXX"; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - else - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - fi - - if test yes = "$GXX"; then - # Set up default GNU C++ configuration - - LT_PATH_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test yes = "$with_gnu_ld"; then - _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='$wl' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | - $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - GXX=no - with_gnu_ld=no - wlarc= - fi - - # PORTME: fill in a description of your system's C++ link characteristics - AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) - _LT_TAGVAR(ld_shlibs, $1)=yes - case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aix[[4-9]]*) - if test ia64 = "$host_cpu"; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag= - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # have runtime linking enabled, and use it for executables. - # For shared libraries, we enable/disable runtime linking - # depending on the kind of the shared library created - - # when "with_aix_soname,aix_use_runtimelinking" is: - # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables - # "aix,yes" lib.so shared, rtl:yes, for executables - # lib.a static archive - # "both,no" lib.so.V(shr.o) shared, rtl:yes - # lib.a(lib.so.V) shared, rtl:no, for executables - # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a(lib.so.V) shared, rtl:no - # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a static archive - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then - # With aix-soname=svr4, we create the lib.so.V shared archives only, - # so we don't have lib.a shared libs to link our executables. - # We have to force runtime linking in this case. - aix_use_runtimelinking=yes - LDFLAGS="$LDFLAGS -Wl,-brtl" - fi - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='$wl-f,' - case $with_aix_soname,$aix_use_runtimelinking in - aix,*) ;; # no import file - svr4,* | *,yes) # use import file - # The Import File defines what to hardcode. - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - ;; - esac - - if test yes = "$GXX"; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`$CC -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - if test yes = "$aix_use_runtimelinking"; then - shared_flag=$shared_flag' $wl-G' - fi - # Need to ensure runtime linking is disabled for the traditional - # shared library, or the linker may eventually find shared libraries - # /with/ Import File - we do not want to mix them. - shared_flag_aix='-shared' - shared_flag_svr4='-shared $wl-G' - else - # not using gcc - if test ia64 = "$host_cpu"; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test yes = "$aix_use_runtimelinking"; then - shared_flag='$wl-G' - else - shared_flag='$wl-bM:SRE' - fi - shared_flag_aix='$wl-bM:SRE' - shared_flag_svr4='$wl-G' - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to - # export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - # The "-G" linker flag allows undefined symbols. - _LT_TAGVAR(no_undefined_flag, $1)='-bernotok' - # Determine the default libpath from the value encoded in an empty - # executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" - - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag - else - if test ia64 = "$host_cpu"; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' - if test yes = "$with_gnu_ld"; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' - # -brtl affects multiple linker settings, -berok does not and is overridden later - compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' - if test svr4 != "$with_aix_soname"; then - # This is similar to how AIX traditionally builds its shared - # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' - fi - if test aix != "$with_aix_soname"; then - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' - else - # used by -dlpreopen to get the symbols - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' - fi - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32* | cegcc*) - case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then - cp "$export_symbols" "$output_objdir/$soname.def"; - echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; - else - $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile=$lt_outputfile.exe - lt_tool_outputfile=$lt_tool_outputfile.exe - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # g++ - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file, use it as - # is; otherwise, prepend EXPORTS... - _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - shrext_cmds=.dll - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - freebsd2.*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - freebsd-elf*) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test yes = "$GXX"; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - hpux10*|hpux11*) - if test no = "$with_gnu_ld"; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test yes = "$GXX"; then - if test no = "$with_gnu_ld"; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test yes = "$GXX"; then - if test no = "$with_gnu_ld"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' - fi - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc* | ecpc* ) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in - *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) - _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' - _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' - _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 6 and above use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' - ;; - xl* | mpixl* | bgxl*) - # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - if test yes = "$supports_anon_versioning"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' - fi - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - - lynxos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - m88k*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - - *nto* | *qnx*) - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - openbsd* | bitrig*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - fi - output_verbose_link_cmd=func_echo_all - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - case $host in - osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - esac - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - case $host in - osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - ;; - *) - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ - $RM $lib.exp' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test yes,no = "$GXX,$with_gnu_ld"; then - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' - case $host in - osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - psos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands '-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test yes,no = "$GXX,$with_gnu_ld"; then - _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - else - # g++ 2.7 appears to require '-G' NOT '-shared' on this - # platform. - _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - fi - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir' - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We CANNOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ - '"$_LT_TAGVAR(old_archive_cmds, $1)" - _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ - '"$_LT_TAGVAR(reload_cmds, $1)" - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - vxworks*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) - test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no - - _LT_TAGVAR(GCC, $1)=$GXX - _LT_TAGVAR(LD, $1)=$LD - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC - with_gnu_ld=$lt_save_with_gnu_ld - lt_cv_path_LDCXX=$lt_cv_path_LD - lt_cv_path_LD=$lt_save_path_LD - lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld - lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test yes != "$_lt_caught_CXX_error" - -AC_LANG_POP -])# _LT_LANG_CXX_CONFIG - - -# _LT_FUNC_STRIPNAME_CNF -# ---------------------- -# func_stripname_cnf prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# -# This function is identical to the (non-XSI) version of func_stripname, -# except this one can be used by m4 code that may be executed by configure, -# rather than the libtool script. -m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl -AC_REQUIRE([_LT_DECL_SED]) -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) -func_stripname_cnf () -{ - case @S|@2 in - .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;; - *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;; - esac -} # func_stripname_cnf -])# _LT_FUNC_STRIPNAME_CNF - - -# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -# --------------------------------- -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -m4_defun([_LT_SYS_HIDDEN_LIBDEPS], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl -# Dependencies to place before and after the object being linked: -_LT_TAGVAR(predep_objects, $1)= -_LT_TAGVAR(postdep_objects, $1)= -_LT_TAGVAR(predeps, $1)= -_LT_TAGVAR(postdeps, $1)= -_LT_TAGVAR(compiler_lib_search_path, $1)= - -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF -int a; -void foo (void) { a = 0; } -_LT_EOF -], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -_LT_EOF -], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer*4 a - a=0 - return - end -_LT_EOF -], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer a - a=0 - return - end -_LT_EOF -], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF -public class foo { - private int a; - public void bar (void) { - a = 0; - } -}; -_LT_EOF -], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF -package foo -func foo() { -} -_LT_EOF -]) - -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; -esac - -dnl Parse the compiler output and extract the necessary -dnl objects, libraries and library flags. -if AC_TRY_EVAL(ac_compile); then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do - case $prev$p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test x-L = "$p" || - test x-R = "$p"; then - prev=$p - continue - fi - - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac - if test no = "$pre_test_object_deps_done"; then - case $prev in - -L | -R) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p - else - _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$_LT_TAGVAR(postdeps, $1)"; then - _LT_TAGVAR(postdeps, $1)=$prev$p - else - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p" - fi - fi - prev= - ;; - - *.lto.$objext) ;; # Ignore GCC LTO objects - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test no = "$pre_test_object_deps_done"; then - if test -z "$_LT_TAGVAR(predep_objects, $1)"; then - _LT_TAGVAR(predep_objects, $1)=$p - else - _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" - fi - else - if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then - _LT_TAGVAR(postdep_objects, $1)=$p - else - _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling $1 test program" -fi - -$RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS - -# PORTME: override above test on systems where it is broken -m4_if([$1], [CXX], -[case $host_os in -interix[[3-9]]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - _LT_TAGVAR(predep_objects,$1)= - _LT_TAGVAR(postdep_objects,$1)= - _LT_TAGVAR(postdeps,$1)= - ;; -esac -]) - -case " $_LT_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac - _LT_TAGVAR(compiler_lib_search_dirs, $1)= -if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then - _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'` -fi -_LT_TAGDECL([], [compiler_lib_search_dirs], [1], - [The directories searched by this compiler when creating a shared library]) -_LT_TAGDECL([], [predep_objects], [1], - [Dependencies to place before and after the objects being linked to - create a shared library]) -_LT_TAGDECL([], [postdep_objects], [1]) -_LT_TAGDECL([], [predeps], [1]) -_LT_TAGDECL([], [postdeps], [1]) -_LT_TAGDECL([], [compiler_lib_search_path], [1], - [The library search path used internally by the compiler when linking - a shared library]) -])# _LT_SYS_HIDDEN_LIBDEPS - - -# _LT_LANG_F77_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a Fortran 77 compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_F77_CONFIG], -[AC_LANG_PUSH(Fortran 77) -if test -z "$F77" || test no = "$F77"; then - _lt_disable_F77=yes -fi - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the F77 compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test yes != "$_lt_disable_F77"; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${F77-"f77"} - CFLAGS=$FFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - GCC=$G77 - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)=$G77 - _LT_TAGVAR(LD, $1)=$LD - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS -fi # test yes != "$_lt_disable_F77" - -AC_LANG_POP -])# _LT_LANG_F77_CONFIG - - -# _LT_LANG_FC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for a Fortran compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_FC_CONFIG], -[AC_LANG_PUSH(Fortran) - -if test -z "$FC" || test no = "$FC"; then - _lt_disable_FC=yes -fi - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for fc test sources. -ac_ext=${ac_fc_srcext-f} - -# Object file extension for compiled fc test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the FC compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test yes != "$_lt_disable_FC"; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${FC-"f95"} - CFLAGS=$FCFLAGS - compiler=$CC - GCC=$ac_cv_fc_compiler_gnu - - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu - _LT_TAGVAR(LD, $1)=$LD - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS -fi # test yes != "$_lt_disable_FC" - -AC_LANG_POP -])# _LT_LANG_FC_CONFIG - - -# _LT_LANG_GCJ_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Java Compiler compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_GCJ_CONFIG], -[AC_REQUIRE([LT_PROG_GCJ])dnl -AC_LANG_SAVE - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC=yes -CC=${GCJ-"gcj"} -CFLAGS=$GCJFLAGS -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)=$LD -_LT_CC_BASENAME([$compiler]) - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_GCJ_CONFIG - - -# _LT_LANG_GO_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Go compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_GO_CONFIG], -[AC_REQUIRE([LT_PROG_GO])dnl -AC_LANG_SAVE - -# Source file extension for Go test sources. -ac_ext=go - -# Object file extension for compiled Go test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="package main; func main() { }" - -# Code to be used in simple link tests -lt_simple_link_test_code='package main; func main() { }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC=yes -CC=${GOC-"gccgo"} -CFLAGS=$GOFLAGS -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)=$LD -_LT_CC_BASENAME([$compiler]) - -# Go did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_GO_CONFIG - - -# _LT_LANG_RC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for the Windows resource compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_RC_CONFIG], -[AC_REQUIRE([LT_PROG_RC])dnl -AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code=$lt_simple_compile_test_code - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC= -CC=${RC-"windres"} -CFLAGS= -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -if test -n "$compiler"; then - : - _LT_CONFIG($1) -fi - -GCC=$lt_save_GCC -AC_LANG_RESTORE -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_RC_CONFIG - - -# LT_PROG_GCJ -# ----------- -AC_DEFUN([LT_PROG_GCJ], -[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], - [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], - [AC_CHECK_TOOL(GCJ, gcj,) - test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS)])])[]dnl -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_GCJ], []) - - -# LT_PROG_GO -# ---------- -AC_DEFUN([LT_PROG_GO], -[AC_CHECK_TOOL(GOC, gccgo,) -]) - - -# LT_PROG_RC -# ---------- -AC_DEFUN([LT_PROG_RC], -[AC_CHECK_TOOL(RC, windres,) -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_RC], []) - - -# _LT_DECL_EGREP -# -------------- -# If we don't have a new enough Autoconf to choose the best grep -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_EGREP], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_REQUIRE([AC_PROG_FGREP])dnl -test -z "$GREP" && GREP=grep -_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) -_LT_DECL([], [EGREP], [1], [An ERE matcher]) -_LT_DECL([], [FGREP], [1], [A literal string matcher]) -dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too -AC_SUBST([GREP]) -]) - - -# _LT_DECL_OBJDUMP -# -------------- -# If we don't have a new enough Autoconf to choose the best objdump -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_OBJDUMP], -[AC_CHECK_TOOL(OBJDUMP, objdump, false) -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) -AC_SUBST([OBJDUMP]) -]) - -# _LT_DECL_DLLTOOL -# ---------------- -# Ensure DLLTOOL variable is set. -m4_defun([_LT_DECL_DLLTOOL], -[AC_CHECK_TOOL(DLLTOOL, dlltool, false) -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) -AC_SUBST([DLLTOOL]) -]) - -# _LT_DECL_SED -# ------------ -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -m4_defun([_LT_DECL_SED], -[AC_PROG_SED -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" -_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) -_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], - [Sed that helps us avoid accidentally triggering echo(1) options like -n]) -])# _LT_DECL_SED - -m4_ifndef([AC_PROG_SED], [ -############################################################ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -############################################################ - -m4_defun([AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f "$lt_ac_sed" && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test 10 -lt "$lt_ac_count" && break - lt_ac_count=`expr $lt_ac_count + 1` - if test "$lt_ac_count" -gt "$lt_ac_max"; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -])#AC_PROG_SED -])#m4_ifndef - -# Old name: -AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_SED], []) - - -# _LT_CHECK_SHELL_FEATURES -# ------------------------ -# Find out whether the shell is Bourne or XSI compatible, -# or has some other useful features. -m4_defun([_LT_CHECK_SHELL_FEATURES], -[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi -_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac -_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl -_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl -])# _LT_CHECK_SHELL_FEATURES - - -# _LT_PATH_CONVERSION_FUNCTIONS -# ----------------------------- -# Determine what file name conversion functions should be used by -# func_to_host_file (and, implicitly, by func_to_host_path). These are needed -# for certain cross-compile configurations and native mingw. -m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_MSG_CHECKING([how to convert $build file names to $host format]) -AC_CACHE_VAL(lt_cv_to_host_file_cmd, -[case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac -]) -to_host_file_cmd=$lt_cv_to_host_file_cmd -AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) -_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], - [0], [convert $build file names to $host format])dnl - -AC_MSG_CHECKING([how to convert $build file names to toolchain format]) -AC_CACHE_VAL(lt_cv_to_tool_file_cmd, -[#assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac -]) -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) -_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], - [0], [convert $build files to toolchain format])dnl -])# _LT_PATH_CONVERSION_FUNCTIONS diff -Nru eog-3.26.2/m4/lt~obsolete.m4 eog-3.27.90/m4/lt~obsolete.m4 --- eog-3.26.2/m4/lt~obsolete.m4 2017-11-08 19:35:52.000000000 +0000 +++ eog-3.27.90/m4/lt~obsolete.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,99 +0,0 @@ -# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -# -# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software -# Foundation, Inc. -# Written by Scott James Remnant, 2004. -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 5 lt~obsolete.m4 - -# These exist entirely to fool aclocal when bootstrapping libtool. -# -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN), -# which have later been changed to m4_define as they aren't part of the -# exported API, or moved to Autoconf or Automake where they belong. -# -# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -# using a macro with the same name in our local m4/libtool.m4 it'll -# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -# and doesn't know about Autoconf macros at all.) -# -# So we provide this file, which has a silly filename so it's always -# included after everything else. This provides aclocal with the -# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -# because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -# -# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -# Yes, that means every name once taken will need to remain here until -# we give up compatibility with versions before 1.7, at which point -# we need to keep only those names which we still refer to. - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) - -m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) -m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) -m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) -m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) -m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) -m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) -m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diff -Nru eog-3.26.2/m4/ltoptions.m4 eog-3.27.90/m4/ltoptions.m4 --- eog-3.26.2/m4/ltoptions.m4 2017-11-08 19:35:52.000000000 +0000 +++ eog-3.27.90/m4/ltoptions.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,437 +0,0 @@ -# Helper functions for option handling. -*- Autoconf -*- -# -# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software -# Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 8 ltoptions.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) - - -# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -# ------------------------------------------ -m4_define([_LT_MANGLE_OPTION], -[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) - - -# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -# --------------------------------------- -# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -# matching handler defined, dispatch to it. Other OPTION-NAMEs are -# saved as a flag. -m4_define([_LT_SET_OPTION], -[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl -m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), - _LT_MANGLE_DEFUN([$1], [$2]), - [m4_warning([Unknown $1 option '$2'])])[]dnl -]) - - -# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -# ------------------------------------------------------------ -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -m4_define([_LT_IF_OPTION], -[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) - - -# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -# ------------------------------------------------------- -# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -# are set. -m4_define([_LT_UNLESS_OPTIONS], -[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), - [m4_define([$0_found])])])[]dnl -m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 -])[]dnl -]) - - -# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -# ---------------------------------------- -# OPTION-LIST is a space-separated list of Libtool options associated -# with MACRO-NAME. If any OPTION has a matching handler declared with -# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -# the unknown option and exit. -m4_defun([_LT_SET_OPTIONS], -[# Set options -m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [_LT_SET_OPTION([$1], _LT_Option)]) - -m4_if([$1],[LT_INIT],[ - dnl - dnl Simply set some default values (i.e off) if boolean options were not - dnl specified: - _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no - ]) - _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no - ]) - dnl - dnl If no reference was made to various pairs of opposing options, then - dnl we run the default mode handler for the pair. For example, if neither - dnl 'shared' nor 'disable-shared' was passed, we enable building of shared - dnl archives by default: - _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) - _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], - [_LT_ENABLE_FAST_INSTALL]) - _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4], - [_LT_WITH_AIX_SONAME([aix])]) - ]) -])# _LT_SET_OPTIONS - - -## --------------------------------- ## -## Macros to handle LT_INIT options. ## -## --------------------------------- ## - -# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -# ----------------------------------------- -m4_define([_LT_MANGLE_DEFUN], -[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) - - -# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -# ----------------------------------------------- -m4_define([LT_OPTION_DEFINE], -[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl -])# LT_OPTION_DEFINE - - -# dlopen -# ------ -LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes -]) - -AU_DEFUN([AC_LIBTOOL_DLOPEN], -[_LT_SET_OPTION([LT_INIT], [dlopen]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the 'dlopen' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) - - -# win32-dll -# --------- -# Declare package support for building win32 dll's. -LT_OPTION_DEFINE([LT_INIT], [win32-dll], -[enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -esac - -test -z "$AS" && AS=as -_LT_DECL([], [AS], [1], [Assembler program])dnl - -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl - -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl -])# win32-dll - -AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -_LT_SET_OPTION([LT_INIT], [win32-dll]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the 'win32-dll' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) - - -# _LT_ENABLE_SHARED([DEFAULT]) -# ---------------------------- -# implement the --enable-shared flag, and supports the 'shared' and -# 'disable-shared' LT_INIT options. -# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. -m4_define([_LT_ENABLE_SHARED], -[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([shared], - [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS=$lt_save_ifs - ;; - esac], - [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) - - _LT_DECL([build_libtool_libs], [enable_shared], [0], - [Whether or not to build shared libraries]) -])# _LT_ENABLE_SHARED - -LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -]) - -AC_DEFUN([AC_DISABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], [disable-shared]) -]) - -AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_SHARED], []) -dnl AC_DEFUN([AM_DISABLE_SHARED], []) - - - -# _LT_ENABLE_STATIC([DEFAULT]) -# ---------------------------- -# implement the --enable-static flag, and support the 'static' and -# 'disable-static' LT_INIT options. -# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. -m4_define([_LT_ENABLE_STATIC], -[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([static], - [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS=$lt_save_ifs - ;; - esac], - [enable_static=]_LT_ENABLE_STATIC_DEFAULT) - - _LT_DECL([build_old_libs], [enable_static], [0], - [Whether or not to build static libraries]) -])# _LT_ENABLE_STATIC - -LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -]) - -AC_DEFUN([AC_DISABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], [disable-static]) -]) - -AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_STATIC], []) -dnl AC_DEFUN([AM_DISABLE_STATIC], []) - - - -# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -# ---------------------------------- -# implement the --enable-fast-install flag, and support the 'fast-install' -# and 'disable-fast-install' LT_INIT options. -# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. -m4_define([_LT_ENABLE_FAST_INSTALL], -[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([fast-install], - [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS=$lt_save_ifs - ;; - esac], - [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) - -_LT_DECL([fast_install], [enable_fast_install], [0], - [Whether or not to optimize for fast installation])dnl -])# _LT_ENABLE_FAST_INSTALL - -LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) - -# Old names: -AU_DEFUN([AC_ENABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the 'fast-install' option into LT_INIT's first parameter.]) -]) - -AU_DEFUN([AC_DISABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the 'disable-fast-install' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) -dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) - - -# _LT_WITH_AIX_SONAME([DEFAULT]) -# ---------------------------------- -# implement the --with-aix-soname flag, and support the `aix-soname=aix' -# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT -# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'. -m4_define([_LT_WITH_AIX_SONAME], -[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl -shared_archive_member_spec= -case $host,$enable_shared in -power*-*-aix[[5-9]]*,yes) - AC_MSG_CHECKING([which variant of shared library versioning to provide]) - AC_ARG_WITH([aix-soname], - [AS_HELP_STRING([--with-aix-soname=aix|svr4|both], - [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])], - [case $withval in - aix|svr4|both) - ;; - *) - AC_MSG_ERROR([Unknown argument to --with-aix-soname]) - ;; - esac - lt_cv_with_aix_soname=$with_aix_soname], - [AC_CACHE_VAL([lt_cv_with_aix_soname], - [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT) - with_aix_soname=$lt_cv_with_aix_soname]) - AC_MSG_RESULT([$with_aix_soname]) - if test aix != "$with_aix_soname"; then - # For the AIX way of multilib, we name the shared archive member - # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', - # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. - # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, - # the AIX toolchain works better with OBJECT_MODE set (default 32). - if test 64 = "${OBJECT_MODE-32}"; then - shared_archive_member_spec=shr_64 - else - shared_archive_member_spec=shr - fi - fi - ;; -*) - with_aix_soname=aix - ;; -esac - -_LT_DECL([], [shared_archive_member_spec], [0], - [Shared archive member basename, for filename based shared library versioning on AIX])dnl -])# _LT_WITH_AIX_SONAME - -LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])]) -LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])]) -LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])]) - - -# _LT_WITH_PIC([MODE]) -# -------------------- -# implement the --with-pic flag, and support the 'pic-only' and 'no-pic' -# LT_INIT options. -# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'. -m4_define([_LT_WITH_PIC], -[AC_ARG_WITH([pic], - [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $withval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac], - [pic_mode=m4_default([$1], [default])]) - -_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl -])# _LT_WITH_PIC - -LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) - -# Old name: -AU_DEFUN([AC_LIBTOOL_PICMODE], -[_LT_SET_OPTION([LT_INIT], [pic-only]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the 'pic-only' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) - -## ----------------- ## -## LTDL_INIT Options ## -## ----------------- ## - -m4_define([_LTDL_MODE], []) -LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], - [m4_define([_LTDL_MODE], [nonrecursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [recursive], - [m4_define([_LTDL_MODE], [recursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [subproject], - [m4_define([_LTDL_MODE], [subproject])]) - -m4_define([_LTDL_TYPE], []) -LT_OPTION_DEFINE([LTDL_INIT], [installable], - [m4_define([_LTDL_TYPE], [installable])]) -LT_OPTION_DEFINE([LTDL_INIT], [convenience], - [m4_define([_LTDL_TYPE], [convenience])]) diff -Nru eog-3.26.2/m4/ltsugar.m4 eog-3.27.90/m4/ltsugar.m4 --- eog-3.26.2/m4/ltsugar.m4 2017-11-08 19:35:52.000000000 +0000 +++ eog-3.27.90/m4/ltsugar.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,124 +0,0 @@ -# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- -# -# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software -# Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltsugar.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) - - -# lt_join(SEP, ARG1, [ARG2...]) -# ----------------------------- -# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -# associated separator. -# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -# versions in m4sugar had bugs. -m4_define([lt_join], -[m4_if([$#], [1], [], - [$#], [2], [[$2]], - [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) -m4_define([_lt_join], -[m4_if([$#$2], [2], [], - [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) - - -# lt_car(LIST) -# lt_cdr(LIST) -# ------------ -# Manipulate m4 lists. -# These macros are necessary as long as will still need to support -# Autoconf-2.59, which quotes differently. -m4_define([lt_car], [[$1]]) -m4_define([lt_cdr], -[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], - [$#], 1, [], - [m4_dquote(m4_shift($@))])]) -m4_define([lt_unquote], $1) - - -# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -# ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'. -# Note that neither SEPARATOR nor STRING are expanded; they are appended -# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -# No SEPARATOR is output if MACRO-NAME was previously undefined (different -# than defined and empty). -# -# This macro is needed until we can rely on Autoconf 2.62, since earlier -# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. -m4_define([lt_append], -[m4_define([$1], - m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) - - - -# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -# ---------------------------------------------------------- -# Produce a SEP delimited list of all paired combinations of elements of -# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -# has the form PREFIXmINFIXSUFFIXn. -# Needed until we can rely on m4_combine added in Autoconf 2.62. -m4_define([lt_combine], -[m4_if(m4_eval([$# > 3]), [1], - [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl -[[m4_foreach([_Lt_prefix], [$2], - [m4_foreach([_Lt_suffix], - ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, - [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) - - -# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -# ----------------------------------------------------------------------- -# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. -m4_define([lt_if_append_uniq], -[m4_ifdef([$1], - [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], - [lt_append([$1], [$2], [$3])$4], - [$5])], - [lt_append([$1], [$2], [$3])$4])]) - - -# lt_dict_add(DICT, KEY, VALUE) -# ----------------------------- -m4_define([lt_dict_add], -[m4_define([$1($2)], [$3])]) - - -# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -# -------------------------------------------- -m4_define([lt_dict_add_subkey], -[m4_define([$1($2:$3)], [$4])]) - - -# lt_dict_fetch(DICT, KEY, [SUBKEY]) -# ---------------------------------- -m4_define([lt_dict_fetch], -[m4_ifval([$3], - m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), - m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) - - -# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -# ----------------------------------------------------------------- -m4_define([lt_if_dict_fetch], -[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], - [$5], - [$6])]) - - -# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -# -------------------------------------------------------------- -m4_define([lt_dict_filter], -[m4_if([$5], [], [], - [lt_join(m4_quote(m4_default([$4], [[, ]])), - lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), - [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl -]) diff -Nru eog-3.26.2/m4/ltversion.m4 eog-3.27.90/m4/ltversion.m4 --- eog-3.26.2/m4/ltversion.m4 2017-11-08 19:35:52.000000000 +0000 +++ eog-3.27.90/m4/ltversion.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ -# ltversion.m4 -- version numbers -*- Autoconf -*- -# -# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# @configure_input@ - -# serial 4179 ltversion.m4 -# This file is part of GNU Libtool - -m4_define([LT_PACKAGE_VERSION], [2.4.6]) -m4_define([LT_PACKAGE_REVISION], [2.4.6]) - -AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.4.6' -macro_revision='2.4.6' -_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -_LT_DECL(, macro_revision, 0) -]) diff -Nru eog-3.26.2/m4/nls.m4 eog-3.27.90/m4/nls.m4 --- eog-3.26.2/m4/nls.m4 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/m4/nls.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ -# nls.m4 serial 5 (gettext-0.18) -dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014 Free Software Foundation, -dnl Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ([2.50]) - -AC_DEFUN([AM_NLS], -[ - AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE([nls], - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT([$USE_NLS]) - AC_SUBST([USE_NLS]) -]) diff -Nru eog-3.26.2/m4/po.m4 eog-3.27.90/m4/po.m4 --- eog-3.26.2/m4/po.m4 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/m4/po.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,453 +0,0 @@ -# po.m4 serial 24 (gettext-0.19) -dnl Copyright (C) 1995-2014 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ([2.60]) - -dnl Checks for all prerequisites of the po subdirectory. -AC_DEFUN([AM_PO_SUBDIRS], -[ - AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl - AC_REQUIRE([AC_PROG_MKDIR_P])dnl - AC_REQUIRE([AC_PROG_SED])dnl - AC_REQUIRE([AM_NLS])dnl - - dnl Release version of the gettext macros. This is used to ensure that - dnl the gettext macros and po/Makefile.in.in are in sync. - AC_SUBST([GETTEXT_MACRO_VERSION], [0.19]) - - dnl Perform the following tests also if --disable-nls has been given, - dnl because they are needed for "make dist" to work. - - dnl Search for GNU msgfmt in the PATH. - dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. - dnl The second test excludes FreeBSD msgfmt. - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT]) - - dnl Test whether it is GNU msgfmt >= 0.15. -changequote(,)dnl - case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; - *) MSGFMT_015=$MSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([MSGFMT_015]) -changequote(,)dnl - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([GMSGFMT_015]) - - dnl Search for GNU xgettext 0.12 or newer in the PATH. - dnl The first test excludes Solaris xgettext and early GNU xgettext versions. - dnl The second test excludes FreeBSD xgettext. - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - dnl Remove leftover from FreeBSD xgettext call. - rm -f messages.po - - dnl Test whether it is GNU xgettext >= 0.15. -changequote(,)dnl - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac -changequote([,])dnl - AC_SUBST([XGETTEXT_015]) - - dnl Search for GNU msgmerge 0.11 or newer in the PATH. - AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, - [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) - - dnl Installation directories. - dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we - dnl have to define it here, so that it can be used in po/Makefile. - test -n "$localedir" || localedir='${datadir}/locale' - AC_SUBST([localedir]) - - dnl Support for AM_XGETTEXT_OPTION. - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) - - AC_CONFIG_COMMANDS([po-directories], [[ - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - gt_tab=`printf '\t'` - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assignment from automake < 1.5. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - # Hide the ALL_LINGUAS assignment from automake < 1.5. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done]], - [# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it - # from automake < 1.5. - eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - ]) -]) - -dnl Postprocesses a Makefile in a directory containing PO files. -AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], -[ - # When this code is run, in config.status, two variables have already been - # set: - # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, - # - LINGUAS is the value of the environment variable LINGUAS at configure - # time. - -changequote(,)dnl - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - # Find a way to echo strings without interpreting backslash. - if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='echo' - else - if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='printf %s\n' - else - echo_func () { - cat < "$ac_file.tmp" - tab=`printf '\t'` - if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` - cat >> "$ac_file.tmp" < /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` - cat >> "$ac_file.tmp" <> "$ac_file.tmp" <, 1996. - -AC_PREREQ([2.50]) - -# Search path for a program which passes the given test. - -dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST], -[ -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL([ac_cv_path_$1], -[case "[$]$1" in - [[\\/]]* | ?:[[\\/]]*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in ifelse([$5], , $PATH, [$5]); do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then - AC_MSG_RESULT([$][$1]) -else - AC_MSG_RESULT([no]) -fi -AC_SUBST([$1])dnl -]) diff -Nru eog-3.26.2/Makefile.am eog-3.27.90/Makefile.am --- eog-3.26.2/Makefile.am 2017-11-08 20:33:41.000000000 +0000 +++ eog-3.27.90/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ -if ENABLE_JPEG -jpeg_DIRS = jpegutils -endif - -SUBDIRS = $(jpeg_DIRS) src plugins help data doc po - -ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} - -EXTRA_DIST = \ - HACKING \ - MAINTAINERS \ - ChangeLog-2.6 \ - ChangeLog-2.18 \ - ChangeLog.pre-git \ - tests - -DISTCLEANFILES = - -DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc --enable-installed-tests - -MAINTAINERCLEANFILES = \ - $(GITIGNORE_MAINTAINERCLEANFILES_TOPLEVEL) \ - $(GITIGNORE_MAINTAINERCLEANFILES_M4_LIBTOOL) \ - $(GITIGNORE_MAINTAINERCLEANFILES_M4_GETTEXT) \ - $(srcdir)/config.h.in \ - $(srcdir)/gtk-doc.make - -@BEHAVE_INSTALLED_TESTS_RULE@ -INSTALLED_TESTS=about undo sidepane fullscreen wallpaper screenshot_tour1 screenshot_tour2 -INSTALLED_TESTS_TYPE=session-exclusive - --include $(top_srcdir)/git.mk - -# This is the last commit before the ChangeLog was converted -CHANGELOG_START = 6a7944721e667a5c2d87e841917d850aea885019 - -dist-hook: - @if test -d "$(srcdir)/.git"; \ - then \ - echo Creating ChangeLog && \ - ( cd "$(top_srcdir)" && \ - echo '# Generated by Makefile. Do not edit.'; echo; \ - $(top_srcdir)/missing --run git log -M -C --stat \ - $(CHANGELOG_START)..) > ChangeLog.tmp \ - && mv -f ChangeLog.tmp $(top_distdir)/ChangeLog \ - || ( rm -f ChangeLog.tmp ; \ - echo Failed to generate ChangeLog >&2 ); \ - else \ - echo A git clone is required to generate a ChangeLog >&2; \ - fi diff -Nru eog-3.26.2/Makefile.in eog-3.27.90/Makefile.in --- eog-3.26.2/Makefile.in 2017-11-08 20:34:23.000000000 +0000 +++ eog-3.27.90/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,937 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ - $(am__configure_deps) $(am__DIST_COMMON) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - cscope distdir dist dist-all distcheck -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ - $(LISP)config.h.in -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -DIST_SUBDIRS = jpegutils src plugins help data doc po -am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS \ - TODO compile config.guess config.rpath config.sub depcomp \ - install-sh ltmain.sh missing -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -GZIP_ENV = --best -DIST_ARCHIVES = $(distdir).tar.xz -DIST_TARGETS = dist-xz -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -@ENABLE_JPEG_TRUE@jpeg_DIRS = jpegutils -SUBDIRS = $(jpeg_DIRS) src plugins help data doc po -ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} -EXTRA_DIST = \ - HACKING \ - MAINTAINERS \ - ChangeLog-2.6 \ - ChangeLog-2.18 \ - ChangeLog.pre-git \ - tests - -DISTCLEANFILES = -DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc --enable-installed-tests -MAINTAINERCLEANFILES = \ - $(GITIGNORE_MAINTAINERCLEANFILES_TOPLEVEL) \ - $(GITIGNORE_MAINTAINERCLEANFILES_M4_LIBTOOL) \ - $(GITIGNORE_MAINTAINERCLEANFILES_M4_GETTEXT) \ - $(srcdir)/config.h.in \ - $(srcdir)/gtk-doc.make - -INSTALLED_TESTS = about undo sidepane fullscreen wallpaper screenshot_tour1 screenshot_tour2 -INSTALLED_TESTS_TYPE = session-exclusive - -# This is the last commit before the ChangeLog was converted -CHANGELOG_START = 6a7944721e667a5c2d87e841917d850aea885019 -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @test -f $@ || rm -f stamp-h1 - @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool config.lt - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) -clean-cscope: - -rm -f cscope.files -cscope.files: clean-cscope cscopelist -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz - $(am__post_remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-tarZ: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build/sub \ - && ../../configure \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=../.. --prefix="$$dc_install_base" \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile config.h -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr \ - distclean-libtool distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(am__recursive_targets) all install-am install-strip - -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ - am--refresh check check-am clean clean-cscope clean-generic \ - clean-libtool cscope cscopelist-am ctags ctags-am dist \ - dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ - dist-tarZ dist-xz dist-zip distcheck distclean \ - distclean-generic distclean-hdr distclean-libtool \ - distclean-tags distcleancheck distdir distuninstallcheck dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs installdirs-am \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - -.PRECIOUS: Makefile - - -@BEHAVE_INSTALLED_TESTS_RULE@ - --include $(top_srcdir)/git.mk - -dist-hook: - @if test -d "$(srcdir)/.git"; \ - then \ - echo Creating ChangeLog && \ - ( cd "$(top_srcdir)" && \ - echo '# Generated by Makefile. Do not edit.'; echo; \ - $(top_srcdir)/missing --run git log -M -C --stat \ - $(CHANGELOG_START)..) > ChangeLog.tmp \ - && mv -f ChangeLog.tmp $(top_distdir)/ChangeLog \ - || ( rm -f ChangeLog.tmp ; \ - echo Failed to generate ChangeLog >&2 ); \ - else \ - echo A git clone is required to generate a ChangeLog >&2; \ - fi - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/meson.build eog-3.27.90/meson.build --- eog-3.26.2/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/meson.build 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,294 @@ +project( + 'eog', 'c', + version: '3.27.90', + license: 'GPL2+', + default_options: 'buildtype=debugoptimized', + meson_version: '>= 0.43.0' +) + +eog_version = meson.project_version() +version_array = eog_version.split('.') +eog_major_version = version_array[0].to_int() +eog_minor_version = version_array[1].to_int() +eog_micro_version = version_array[2].to_int() + +eog_api_version = '@0@.0'.format(eog_major_version) +eog_api_name = '@0@-@1@'.format(meson.project_name(), eog_api_version) + +eog_gir_ns = 'Eog' +eog_gir_version = '1.0' + +eog_prefix = get_option('prefix') +eog_bindir = join_paths(eog_prefix, get_option('bindir')) +eog_datadir = join_paths(eog_prefix, get_option('datadir')) +eog_includedir = join_paths(eog_prefix, get_option('includedir')) +eog_libdir = join_paths(eog_prefix, get_option('libdir')) +eog_libexecdir = join_paths(eog_prefix, get_option('libexecdir')) +eog_localedir = join_paths(eog_prefix, get_option('localedir')) + +eog_pkgdatadir = join_paths(eog_datadir, meson.project_name()) +eog_pkglibdir = join_paths(eog_libdir, meson.project_name()) +eog_pkglibexecdir = join_paths(eog_libexecdir, meson.project_name()) + +eog_pluginsdir = join_paths(eog_pkglibdir, 'plugins') +eog_schemadir = join_paths(eog_datadir, 'glib-2.0', 'schemas') + +eog_debug = get_option('buildtype').contains('debug') + +cc = meson.get_compiler('c') + +config_h = configuration_data() + +# defines +set_defines = [ + # package + ['PACKAGE', meson.project_name()], + ['PACKAGE_BUGREPORT', 'http://bugzilla.gnome.org/enter_bug.cgi?product=' + meson.project_name()], + ['PACKAGE_URL', 'https://wiki.gnome.org/Apps/EyeOfGnome'], + ['VERSION', eog_version], + # i18n + ['GETTEXT_PACKAGE', meson.project_name()] +] + +foreach define: set_defines + config_h.set_quoted(define[0], define[1]) +endforeach + +# support for nl_langinfo (_NL_MEASUREMENT_MEASUREMENT) (optional) +langinfo_measurement_src = ''' + #include + int main() { + char c; + c = *((unsigned char *) nl_langinfo(_NL_MEASUREMENT_MEASUREMENT)); + }; +''' +config_h.set('HAVE__NL_MEASUREMENT_MEASUREMENT', cc.compiles(langinfo_measurement_src), + description: 'Define if _NL_MEASUREMENT_MEASUREMENT is available') + +# support for strptime +config_h.set('HAVE_STRPTIME', cc.has_function('strptime')) + +# compiler flags +common_flags = ['-DHAVE_CONFIG_H'] + +compiler_flags = [] +if eog_debug + test_cflags = [ + '-Werror=format=2', + '-Werror=implicit-function-declaration', + '-Werror=init-self', + '-Werror=missing-include-dirs', + '-Werror=missing-prototypes', + '-Werror=pointer-arith', + '-Werror=return-type', + '-Wnested-externs', + '-Wstrict-prototypes' + ] + + compiler_flags += cc.get_supported_arguments(test_cflags) +endif + +add_project_arguments(common_flags + compiler_flags, language: 'c') + +ldflag = '-Wl,--version-script' +have_version_script = host_machine.system().contains('linux') and cc.has_argument(ldflag) + +glib_req_version = '>= 2.53.4' +peas_req_version = '>= 0.7.4' + +eog_deps = [ + dependency('gtk+-3.0', version: '>= 3.22.0'), + dependency('glib-2.0', version: glib_req_version), + dependency('gio-2.0', version: glib_req_version), + dependency('gio-unix-2.0', version: glib_req_version), + dependency('gnome-desktop-3.0', version: '>= 2.91.2'), + dependency('gdk-pixbuf-2.0', version: '>= 2.36.5'), + dependency('gtk+-unix-print-3.0', version: '>= 3.5.4'), + dependency('shared-mime-info', version: '>= 0.20'), + dependency('gsettings-desktop-schemas', version: '>= 2.91.92'), + dependency('libpeas-1.0', version: peas_req_version), + dependency('libpeas-gtk-1.0', version: peas_req_version), + cc.find_library('m') +] + +# ZLIB support (required) +have_zlib = false +if cc.has_header('zlib.h') + zlib_dep = cc.find_library('z', required: false) + have_zlib = zlib_dep.found() and (cc.has_function('inflate', dependencies: zlib_dep) or cc.has_function('crc32', dependencies: zlib_dep)) + + if have_zlib + eog_deps += zlib_dep + endif +endif +assert(have_zlib, 'No sufficient zlib library found on your system') + +# EXIF (optional) +have_exif = false +if get_option('libexif') + libexif_dep = dependency('libexif', version: '>= 0.6.14', required: false) + have_exif = libexif_dep.found() and cc.has_header('libexif/exif-data.h', dependencies: libexif_dep) + + if have_exif + eog_deps += libexif_dep + config_h.set10('HAVE_EXIF', true, + description: 'EXIF Support.') + endif +endif + +# Little CMS (optional) +have_lcms = false +if get_option('cms') + libcms_dep = dependency('lcms2', required: false) + have_lcms = libcms_dep.found() + + if have_lcms + eog_deps += libcms_dep + config_h.set10('HAVE_LCMS', true, + description: 'Little CMS Support.') + endif +endif + +# Exempi (optional) +have_exempi = false +if get_option('xmp') + libexempi_dep = dependency('exempi-2.0', version: '>= 1.99.5', required: false) + have_exempi = libexempi_dep.found() + + if have_exempi + eog_deps += libexempi_dep + config_h.set10('HAVE_EXEMPI', true, + description: 'XMP Support.') + endif +endif + +# Jpeg (semi-optional) +jpeg_deps = [] + +have_jpeg = false +have_jpeg_80 = false + +if get_option('libjpeg') + libjpeg_dep = dependency('libjpeg', required: false) + if libjpeg_dep.found() + have_jpeg = cc.has_function('jpeg_destroy_decompress', dependencies: libjpeg_dep) and cc.has_header('jpeglib.h', dependencies: libjpeg_dep) + + if have_jpeg + jpeg_deps += libjpeg_dep + + have_progressive = cc.has_function('jpeg_simple_progression', dependencies: libjpeg_dep) + if not have_progressive + message('JPEG library does not support progressive saving.') + endif + + message('Checking libjpeg version is 8 or greater') + jpeg_80_check_src = ''' + #include + #include + #if JPEG_LIB_VERSION < 80 + #error "wrong version" + #endif + ''' + have_jpeg_80 = cc.compiles(jpeg_80_check_src, dependencies: libjpeg_dep) + else + error_msg = '*** JPEG loader will not be built (JPEG header file not found) ***\n' + endif + else + error_msg = '*** JPEG loader will not be built (JPEG library not found) ***\n' + endif + + if not have_jpeg + error_msg += '*** You can build without it by passing -Dlibjpeg=false to\n' + error_msg += '*** meson but some programs using GTK+ may not work properly\n' + error(error_msg) + endif + + config_h.set10('HAVE_JPEG', true, + description: 'Jpeg Support.') +endif +config_h.set('HAVE_LIBJPEG', have_jpeg, + description: 'libjpeg is Present.') + +# introspection support +have_gir = false +if get_option('introspection') + gir_dep = dependency('gobject-introspection-1.0', version: '>= 0.6.7', required: false) + have_gir = gir_dep.found() + + if have_gir + eog_deps += gir_dep + endif +endif +config_h.set('HAVE_INTROSPECTION', have_gir) + +# RSVG (optional for scaling svg image) +have_rsvg = false +if get_option('librsvg') + librsvg_dep = dependency('librsvg-2.0', version: '>= 2.36.2', required: false) + have_rsvg = librsvg_dep.found() + + if have_rsvg + eog_deps += librsvg_dep + endif +endif +config_h.set('HAVE_RSVG', have_rsvg, + description: 'RSVG Support.') + +# libX11 (required for TotemScrSaver and Color Profiling) +gdk_dep = dependency('gdk-3.0', required: false) + +if have_lcms or (gdk_dep.found() and gdk_dep.get_pkgconfig_variable('targets').contains('x11')) + libx11_dep = dependency('x11', required: false) + assert(libx11_dep.found(), 'X development libraries (libX11) not found') + eog_deps += libx11_dep +endif + +gnome = import('gnome') +i18n = import('i18n') +pkg = import('pkgconfig') + +data_dir = join_paths(meson.source_root(), 'data') +po_dir = join_paths(meson.source_root(), 'po') + +top_inc = include_directories('.') + +subdir('data') + +if have_jpeg + subdir('jpegutils') +endif + +subdir('src') +subdir('plugins') +subdir('help') + +if get_option('gtk_doc') + subdir('doc/reference') +endif + +subdir('po') + +if get_option('installed_tests') + subdir('tests') +endif + +configure_file( + output: 'config.h', + configuration: config_h +) + +meson.add_install_script( + 'meson_post_install.py', + eog_datadir +) + +output = 'Configure summary:\n\n' +output += ' Source code location .......: ' + meson.source_root() + '\n' +output += ' Compiler ...................: ' + cc.get_id() + '\n' +output += ' Extra Compiler Warnings ....: ' + ' '.join(compiler_flags) + '\n' +output += ' EXIF support ...............: ' + have_exif.to_string() + '\n' +output += ' XMP support ................: ' + have_exempi.to_string() + '\n' +output += ' JPEG support ...............: ' + have_jpeg.to_string() + '\n' +output += ' Colour management support ..: ' + have_lcms.to_string() + '\n' +output += ' GObject Introspection.......: ' + have_gir.to_string() + '\n' +message(output) diff -Nru eog-3.26.2/meson_options.txt eog-3.27.90/meson_options.txt --- eog-3.26.2/meson_options.txt 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/meson_options.txt 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,8 @@ +option('libexif', type: 'boolean', value: true, description: 'enable EXIF support') +option('cms', type: 'boolean', value: true, description: 'enable colour management support') +option('xmp', type: 'boolean', value: true, description: 'enable special XMP support') +option('libjpeg', type: 'boolean', value: true, description: 'enable special JPEG support') +option('librsvg', type: 'boolean', value: true, description: 'enable RSVG support') +option('gtk_doc', type: 'boolean', value: false, description: 'use gtk-doc to build documentation') +option('introspection', type: 'boolean', value: true, description: 'Enable GObject Introspection (depends on GObject)') +option('installed_tests', type: 'boolean', value: false, description: 'enable installed unit tests') diff -Nru eog-3.26.2/meson_post_install.py eog-3.27.90/meson_post_install.py --- eog-3.26.2/meson_post_install.py 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/meson_post_install.py 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,14 @@ +#!/usr/bin/env python3 + +import os +import subprocess +import sys + +if not os.environ.get('DESTDIR'): + icondir = os.path.join(sys.argv[1], 'icons', 'hicolor') + print('Update icon cache...') + subprocess.call(['gtk-update-icon-cache', '-f', '-t', icondir]) + + schemadir = os.path.join(sys.argv[1], 'glib-2.0', 'schemas') + print('Compiling gsettings schemas...') + subprocess.call(['glib-compile-schemas', schemadir]) diff -Nru eog-3.26.2/missing eog-3.27.90/missing --- eog-3.26.2/missing 2017-11-08 19:35:58.000000000 +0000 +++ eog-3.27.90/missing 1970-01-01 00:00:00.000000000 +0000 @@ -1,215 +0,0 @@ -#! /bin/sh -# Common wrapper for a few potentially missing GNU programs. - -scriptversion=2016-01-11.22; # UTC - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. -# Originally written by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try '$0 --help' for more information" - exit 1 -fi - -case $1 in - - --is-lightweight) - # Used by our autoconf macros to check whether the available missing - # script is modern enough. - exit 0 - ;; - - --run) - # Back-compat with the calling convention used by older automake. - shift - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due -to PROGRAM being missing or too old. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - -Supported PROGRAM values: - aclocal autoconf autoheader autom4te automake makeinfo - bison yacc flex lex help2man - -Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and -'g' are ignored when checking the name. - -Send bug reports to ." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: unknown '$1' option" - echo 1>&2 "Try '$0 --help' for more information" - exit 1 - ;; - -esac - -# Run the given program, remember its exit status. -"$@"; st=$? - -# If it succeeded, we are done. -test $st -eq 0 && exit 0 - -# Also exit now if we it failed (or wasn't found), and '--version' was -# passed; such an option is passed most likely to detect whether the -# program is present and works. -case $2 in --version|--help) exit $st;; esac - -# Exit code 63 means version mismatch. This often happens when the user -# tries to use an ancient version of a tool on a file that requires a -# minimum version. -if test $st -eq 63; then - msg="probably too old" -elif test $st -eq 127; then - # Program was missing. - msg="missing on your system" -else - # Program was found and executed, but failed. Give up. - exit $st -fi - -perl_URL=http://www.perl.org/ -flex_URL=http://flex.sourceforge.net/ -gnu_software_URL=http://www.gnu.org/software - -program_details () -{ - case $1 in - aclocal|automake) - echo "The '$1' program is part of the GNU Automake package:" - echo "<$gnu_software_URL/automake>" - echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" - echo "<$gnu_software_URL/autoconf>" - echo "<$gnu_software_URL/m4/>" - echo "<$perl_URL>" - ;; - autoconf|autom4te|autoheader) - echo "The '$1' program is part of the GNU Autoconf package:" - echo "<$gnu_software_URL/autoconf/>" - echo "It also requires GNU m4 and Perl in order to run:" - echo "<$gnu_software_URL/m4/>" - echo "<$perl_URL>" - ;; - esac -} - -give_advice () -{ - # Normalize program name to check for. - normalized_program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - - printf '%s\n' "'$1' is $msg." - - configure_deps="'configure.ac' or m4 files included by 'configure.ac'" - case $normalized_program in - autoconf*) - echo "You should only need it if you modified 'configure.ac'," - echo "or m4 files included by it." - program_details 'autoconf' - ;; - autoheader*) - echo "You should only need it if you modified 'acconfig.h' or" - echo "$configure_deps." - program_details 'autoheader' - ;; - automake*) - echo "You should only need it if you modified 'Makefile.am' or" - echo "$configure_deps." - program_details 'automake' - ;; - aclocal*) - echo "You should only need it if you modified 'acinclude.m4' or" - echo "$configure_deps." - program_details 'aclocal' - ;; - autom4te*) - echo "You might have modified some maintainer files that require" - echo "the 'autom4te' program to be rebuilt." - program_details 'autom4te' - ;; - bison*|yacc*) - echo "You should only need it if you modified a '.y' file." - echo "You may want to install the GNU Bison package:" - echo "<$gnu_software_URL/bison/>" - ;; - lex*|flex*) - echo "You should only need it if you modified a '.l' file." - echo "You may want to install the Fast Lexical Analyzer package:" - echo "<$flex_URL>" - ;; - help2man*) - echo "You should only need it if you modified a dependency" \ - "of a man page." - echo "You may want to install the GNU Help2man package:" - echo "<$gnu_software_URL/help2man/>" - ;; - makeinfo*) - echo "You should only need it if you modified a '.texi' file, or" - echo "any other file indirectly affecting the aspect of the manual." - echo "You might want to install the Texinfo package:" - echo "<$gnu_software_URL/texinfo/>" - echo "The spurious makeinfo call might also be the consequence of" - echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" - echo "want to install GNU make:" - echo "<$gnu_software_URL/make/>" - ;; - *) - echo "You might have modified some files without having the proper" - echo "tools for further handling them. Check the 'README' file, it" - echo "often tells you about the needed prerequisites for installing" - echo "this package. You may also peek at any GNU archive site, in" - echo "case some other package contains this missing '$1' program." - ;; - esac -} - -give_advice "$1" | sed -e '1s/^/WARNING: /' \ - -e '2,$s/^/ /' >&2 - -# Propagate the correct exit status (expected to be 127 for a program -# not found, 63 for a program that failed due to version mismatch). -exit $st - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC0" -# time-stamp-end: "; # UTC" -# End: diff -Nru eog-3.26.2/NEWS eog-3.27.90/NEWS --- eog-3.26.2/NEWS 2017-11-08 20:54:56.000000000 +0000 +++ eog-3.27.90/NEWS 2018-02-12 20:46:58.000000000 +0000 @@ -1,3 +1,47 @@ +Version 3.27.90 +--------------- + + * Swapped shortcuts for gallery and sidebar to match other GNOME apps + * Disabled color profile generation from Exif values + * Replaced several deprecated Glib/Gtk+ function calls + +Bug fixes: + #792682, F9 to toggle Side Pane (Felix Riemann) + #792770, JPEG image renders black on-screen (Felix Riemann) + #792923, Port from gtk_show_uri to gtk_show_uri_on_window (Timm Bäder) + #792924, Fix warnings from recent glib changes to g_object_(un)ref (Timm Bäder) + #792925, Remove gdk_window_process_updates call (Timm Bäder) + +New and updated manual translations + +- Piotr Drąg [pl] + +Version 3.27.3 +-------------- + + * Drop Autotools support in favour of Meson (Iñigo Martínez) + * Drop deprecated/unused files from help docs (Felix Riemann) + +Bug fixes: + #784354, Port to meson build system (Iñigo Martínez) + +Version 3.27.2 +-------------- + +Bug fixes: + #787188, Close confirmation dialog looks outdated + #787750, EOG 3.26 does not store recently used files + +Version 3.27.1 +-------------- + + * Port to meson build system (Iñigo Martínez) + +Bug fixes: + #784354, Port to meson build system (Iñigo Martínez) + #790078, build: Install appstream metadata to non-deprecated location + (Jeremy Bicha) + Version 3.26.2 -------------- diff -Nru eog-3.26.2/plugins/Makefile.am eog-3.27.90/plugins/Makefile.am --- eog-3.26.2/plugins/Makefile.am 2017-11-08 20:33:41.000000000 +0000 +++ eog-3.27.90/plugins/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,69 +0,0 @@ -AUTOMAKE_OPTIONS = subdir-objects - -pluginsdir = $(libdir)/eog/plugins - -AM_CPPFLAGS = \ - -I$(top_srcdir)/src \ - $(EOG_CFLAGS) \ - $(WARN_CFLAGS) \ - -DEOG_LOCALEDIR=\""$(prefix)/$(DATADIRNAME)/locale"\" - -AM_LDFLAGS = -avoid-version -module - -plugins_LTLIBRARIES = \ - fullscreen/libfullscreen.la \ - reload/libreload.la - -plugins_in_files = \ - fullscreen/fullscreen.plugin.desktop.in \ - reload/reload.plugin.desktop.in - -# Fullscreen plugin -fullscreen_libfullscreen_la_SOURCES = \ - fullscreen/eog-fullscreen-plugin.h \ - fullscreen/eog-fullscreen-plugin.c - -fullscreen_libfullscreen_la_LIBADD = \ - $(top_builddir)/src/libeog.la \ - $(EOG_LIBS) - -# Reload plugin -reload_libreload_la_SOURCES = \ - reload/eog-reload-plugin.h \ - reload/eog-reload-plugin.c - -reload_libreload_la_LIBADD = \ - $(top_builddir)/src/libeog.la \ - $(EOG_LIBS) - -# Statusbar Date Plugin -if HAVE_EXIF -plugins_LTLIBRARIES += statusbar-date/libstatusbar-date.la - -statusbar_date_libstatusbar_date_la_SOURCES = \ - statusbar-date/eog-statusbar-date-plugin.h \ - statusbar-date/eog-statusbar-date-plugin.c - -statusbar_date_libstatusbar_date_la_LIBADD = \ - $(top_builddir)/src/libeog.la \ - $(EOG_LIBS) - -plugins_in_files += statusbar-date/statusbar-date.plugin.desktop.in -endif - -# Generate plugin info files -plugins_DATA = $(plugins_in_files:.plugin.desktop.in=.plugin) - -# msgfmt 0.19.8 has a bug that adding additional keywords for translation -# disables the default keywords, so we have to explicitly name them for now. -$(plugins_DATA): %.plugin: %.plugin.desktop.in $(wildcard $(top_srcdir)/po/*po) - $(AM_V_GEN)$(MSGFMT) --desktop --keyword=Name --keyword=Description --template $< -d $(top_srcdir)/po -o $@ - - - -DISTCLEANFILES = $(plugins_DATA) -CLEANFILES = $(plugins_DATA) - -EXTRA_DIST = $(plugins_in_files) - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/plugins/Makefile.in eog-3.27.90/plugins/Makefile.in --- eog-3.26.2/plugins/Makefile.in 2017-11-08 20:34:30.000000000 +0000 +++ eog-3.27.90/plugins/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,877 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ - -# Statusbar Date Plugin -@HAVE_EXIF_TRUE@am__append_1 = statusbar-date/libstatusbar-date.la -@HAVE_EXIF_TRUE@am__append_2 = statusbar-date/statusbar-date.plugin.desktop.in -subdir = plugins -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(pluginsdir)" -LTLIBRARIES = $(plugins_LTLIBRARIES) -am__DEPENDENCIES_1 = -fullscreen_libfullscreen_la_DEPENDENCIES = \ - $(top_builddir)/src/libeog.la $(am__DEPENDENCIES_1) -am__dirstamp = $(am__leading_dot)dirstamp -am_fullscreen_libfullscreen_la_OBJECTS = \ - fullscreen/eog-fullscreen-plugin.lo -fullscreen_libfullscreen_la_OBJECTS = \ - $(am_fullscreen_libfullscreen_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -reload_libreload_la_DEPENDENCIES = $(top_builddir)/src/libeog.la \ - $(am__DEPENDENCIES_1) -am_reload_libreload_la_OBJECTS = reload/eog-reload-plugin.lo -reload_libreload_la_OBJECTS = $(am_reload_libreload_la_OBJECTS) -@HAVE_EXIF_TRUE@statusbar_date_libstatusbar_date_la_DEPENDENCIES = \ -@HAVE_EXIF_TRUE@ $(top_builddir)/src/libeog.la \ -@HAVE_EXIF_TRUE@ $(am__DEPENDENCIES_1) -am__statusbar_date_libstatusbar_date_la_SOURCES_DIST = \ - statusbar-date/eog-statusbar-date-plugin.h \ - statusbar-date/eog-statusbar-date-plugin.c -@HAVE_EXIF_TRUE@am_statusbar_date_libstatusbar_date_la_OBJECTS = \ -@HAVE_EXIF_TRUE@ statusbar-date/eog-statusbar-date-plugin.lo -statusbar_date_libstatusbar_date_la_OBJECTS = \ - $(am_statusbar_date_libstatusbar_date_la_OBJECTS) -@HAVE_EXIF_TRUE@am_statusbar_date_libstatusbar_date_la_rpath = -rpath \ -@HAVE_EXIF_TRUE@ $(pluginsdir) -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(fullscreen_libfullscreen_la_SOURCES) \ - $(reload_libreload_la_SOURCES) \ - $(statusbar_date_libstatusbar_date_la_SOURCES) -DIST_SOURCES = $(fullscreen_libfullscreen_la_SOURCES) \ - $(reload_libreload_la_SOURCES) \ - $(am__statusbar_date_libstatusbar_date_la_SOURCES_DIST) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -DATA = $(plugins_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp \ - ChangeLog -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -AUTOMAKE_OPTIONS = subdir-objects -pluginsdir = $(libdir)/eog/plugins -AM_CPPFLAGS = \ - -I$(top_srcdir)/src \ - $(EOG_CFLAGS) \ - $(WARN_CFLAGS) \ - -DEOG_LOCALEDIR=\""$(prefix)/$(DATADIRNAME)/locale"\" - -AM_LDFLAGS = -avoid-version -module -plugins_LTLIBRARIES = fullscreen/libfullscreen.la reload/libreload.la \ - $(am__append_1) -plugins_in_files = fullscreen/fullscreen.plugin.desktop.in \ - reload/reload.plugin.desktop.in $(am__append_2) - -# Fullscreen plugin -fullscreen_libfullscreen_la_SOURCES = \ - fullscreen/eog-fullscreen-plugin.h \ - fullscreen/eog-fullscreen-plugin.c - -fullscreen_libfullscreen_la_LIBADD = \ - $(top_builddir)/src/libeog.la \ - $(EOG_LIBS) - - -# Reload plugin -reload_libreload_la_SOURCES = \ - reload/eog-reload-plugin.h \ - reload/eog-reload-plugin.c - -reload_libreload_la_LIBADD = \ - $(top_builddir)/src/libeog.la \ - $(EOG_LIBS) - -@HAVE_EXIF_TRUE@statusbar_date_libstatusbar_date_la_SOURCES = \ -@HAVE_EXIF_TRUE@ statusbar-date/eog-statusbar-date-plugin.h \ -@HAVE_EXIF_TRUE@ statusbar-date/eog-statusbar-date-plugin.c - -@HAVE_EXIF_TRUE@statusbar_date_libstatusbar_date_la_LIBADD = \ -@HAVE_EXIF_TRUE@ $(top_builddir)/src/libeog.la \ -@HAVE_EXIF_TRUE@ $(EOG_LIBS) - - -# Generate plugin info files -plugins_DATA = $(plugins_in_files:.plugin.desktop.in=.plugin) -DISTCLEANFILES = $(plugins_DATA) -CLEANFILES = $(plugins_DATA) -EXTRA_DIST = $(plugins_in_files) -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign plugins/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign plugins/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -install-pluginsLTLIBRARIES: $(plugins_LTLIBRARIES) - @$(NORMAL_INSTALL) - @list='$(plugins_LTLIBRARIES)'; test -n "$(pluginsdir)" || list=; \ - list2=; for p in $$list; do \ - if test -f $$p; then \ - list2="$$list2 $$p"; \ - else :; fi; \ - done; \ - test -z "$$list2" || { \ - echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pluginsdir)'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pluginsdir)"; \ - } - -uninstall-pluginsLTLIBRARIES: - @$(NORMAL_UNINSTALL) - @list='$(plugins_LTLIBRARIES)'; test -n "$(pluginsdir)" || list=; \ - for p in $$list; do \ - $(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pluginsdir)/$$f'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pluginsdir)/$$f"; \ - done - -clean-pluginsLTLIBRARIES: - -test -z "$(plugins_LTLIBRARIES)" || rm -f $(plugins_LTLIBRARIES) - @list='$(plugins_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } -fullscreen/$(am__dirstamp): - @$(MKDIR_P) fullscreen - @: > fullscreen/$(am__dirstamp) -fullscreen/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) fullscreen/$(DEPDIR) - @: > fullscreen/$(DEPDIR)/$(am__dirstamp) -fullscreen/eog-fullscreen-plugin.lo: fullscreen/$(am__dirstamp) \ - fullscreen/$(DEPDIR)/$(am__dirstamp) - -fullscreen/libfullscreen.la: $(fullscreen_libfullscreen_la_OBJECTS) $(fullscreen_libfullscreen_la_DEPENDENCIES) $(EXTRA_fullscreen_libfullscreen_la_DEPENDENCIES) fullscreen/$(am__dirstamp) - $(AM_V_CCLD)$(LINK) -rpath $(pluginsdir) $(fullscreen_libfullscreen_la_OBJECTS) $(fullscreen_libfullscreen_la_LIBADD) $(LIBS) -reload/$(am__dirstamp): - @$(MKDIR_P) reload - @: > reload/$(am__dirstamp) -reload/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) reload/$(DEPDIR) - @: > reload/$(DEPDIR)/$(am__dirstamp) -reload/eog-reload-plugin.lo: reload/$(am__dirstamp) \ - reload/$(DEPDIR)/$(am__dirstamp) - -reload/libreload.la: $(reload_libreload_la_OBJECTS) $(reload_libreload_la_DEPENDENCIES) $(EXTRA_reload_libreload_la_DEPENDENCIES) reload/$(am__dirstamp) - $(AM_V_CCLD)$(LINK) -rpath $(pluginsdir) $(reload_libreload_la_OBJECTS) $(reload_libreload_la_LIBADD) $(LIBS) -statusbar-date/$(am__dirstamp): - @$(MKDIR_P) statusbar-date - @: > statusbar-date/$(am__dirstamp) -statusbar-date/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) statusbar-date/$(DEPDIR) - @: > statusbar-date/$(DEPDIR)/$(am__dirstamp) -statusbar-date/eog-statusbar-date-plugin.lo: \ - statusbar-date/$(am__dirstamp) \ - statusbar-date/$(DEPDIR)/$(am__dirstamp) - -statusbar-date/libstatusbar-date.la: $(statusbar_date_libstatusbar_date_la_OBJECTS) $(statusbar_date_libstatusbar_date_la_DEPENDENCIES) $(EXTRA_statusbar_date_libstatusbar_date_la_DEPENDENCIES) statusbar-date/$(am__dirstamp) - $(AM_V_CCLD)$(LINK) $(am_statusbar_date_libstatusbar_date_la_rpath) $(statusbar_date_libstatusbar_date_la_OBJECTS) $(statusbar_date_libstatusbar_date_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -rm -f fullscreen/*.$(OBJEXT) - -rm -f fullscreen/*.lo - -rm -f reload/*.$(OBJEXT) - -rm -f reload/*.lo - -rm -f statusbar-date/*.$(OBJEXT) - -rm -f statusbar-date/*.lo - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@fullscreen/$(DEPDIR)/eog-fullscreen-plugin.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@reload/$(DEPDIR)/eog-reload-plugin.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@statusbar-date/$(DEPDIR)/eog-statusbar-date-plugin.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ -@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -rm -rf fullscreen/.libs fullscreen/_libs - -rm -rf reload/.libs reload/_libs - -rm -rf statusbar-date/.libs statusbar-date/_libs -install-pluginsDATA: $(plugins_DATA) - @$(NORMAL_INSTALL) - @list='$(plugins_DATA)'; test -n "$(pluginsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pluginsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pluginsdir)" || exit $$?; \ - done - -uninstall-pluginsDATA: - @$(NORMAL_UNINSTALL) - @list='$(plugins_DATA)'; test -n "$(pluginsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir) - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LTLIBRARIES) $(DATA) -installdirs: - for dir in "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(pluginsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -rm -f fullscreen/$(DEPDIR)/$(am__dirstamp) - -rm -f fullscreen/$(am__dirstamp) - -rm -f reload/$(DEPDIR)/$(am__dirstamp) - -rm -f reload/$(am__dirstamp) - -rm -f statusbar-date/$(DEPDIR)/$(am__dirstamp) - -rm -f statusbar-date/$(am__dirstamp) - -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-pluginsLTLIBRARIES \ - mostlyclean-am - -distclean: distclean-am - -rm -rf fullscreen/$(DEPDIR) reload/$(DEPDIR) statusbar-date/$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-pluginsDATA install-pluginsLTLIBRARIES - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf fullscreen/$(DEPDIR) reload/$(DEPDIR) statusbar-date/$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-pluginsDATA uninstall-pluginsLTLIBRARIES - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-pluginsLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-pluginsDATA install-pluginsLTLIBRARIES install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ - uninstall-am uninstall-pluginsDATA \ - uninstall-pluginsLTLIBRARIES - -.PRECIOUS: Makefile - - -# msgfmt 0.19.8 has a bug that adding additional keywords for translation -# disables the default keywords, so we have to explicitly name them for now. -$(plugins_DATA): %.plugin: %.plugin.desktop.in $(wildcard $(top_srcdir)/po/*po) - $(AM_V_GEN)$(MSGFMT) --desktop --keyword=Name --keyword=Description --template $< -d $(top_srcdir)/po -o $@ - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/plugins/meson.build eog-3.27.90/plugins/meson.build --- eog-3.26.2/plugins/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/plugins/meson.build 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,34 @@ +msgfmt = find_program('msgfmt') + +plugins = [ + 'fullscreen', + 'reload' +] + +if have_exif + plugins += 'statusbar-date' +endif + +foreach plugin: plugins + shared_module( + plugin, + sources: '@0@/eog-@0@-plugin.c'.format(plugin), + include_directories: top_inc, + dependencies: libeog_dep, + install: true, + install_dir: eog_pluginsdir + ) + + plugin_data = plugin + '.plugin' + + # FIXME: Move custom_target to i18n.merge_file when gettext acquires plugin support. + # http://lists.gnu.org/archive/html/bug-gettext/2017-06/msg00001.html + custom_target( + plugin_data, + input: '@0@/@1@.desktop.in'.format(plugin, plugin_data), + output: plugin_data, + command: [msgfmt, '--desktop', '--keyword=Name', '--keyword=Description', '--template', '@INPUT@', '-d', po_dir, '-o', '@OUTPUT@'], + install: true, + install_dir: eog_pluginsdir + ) +endforeach Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/af.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/af.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/am.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/am.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/an.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/an.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ar.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ar.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/as.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/as.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ast.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ast.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/az.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/az.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/be.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/be.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/be@latin.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/be@latin.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/bg.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/bg.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/bn.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/bn.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/bn_IN.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/bn_IN.gmo differ diff -Nru eog-3.26.2/po/boldquot.sed eog-3.27.90/po/boldquot.sed --- eog-3.26.2/po/boldquot.sed 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/po/boldquot.sed 1970-01-01 00:00:00.000000000 +0000 @@ -1,10 +0,0 @@ -s/"\([^"]*\)"/“\1”/g -s/`\([^`']*\)'/‘\1’/g -s/ '\([^`']*\)' / ‘\1’ /g -s/ '\([^`']*\)'$/ ‘\1’/g -s/^'\([^`']*\)' /‘\1’ /g -s/“”/""/g -s/“/“/g -s/”/”/g -s/‘/‘/g -s/’/’/g Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/br.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/br.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/bs.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/bs.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ca.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ca.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ca@valencia.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ca@valencia.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/cs.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/cs.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/cy.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/cy.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/da.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/da.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/de.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/de.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/dz.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/dz.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/el.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/el.gmo differ diff -Nru eog-3.26.2/po/en@boldquot.header eog-3.27.90/po/en@boldquot.header --- eog-3.26.2/po/en@boldquot.header 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/po/en@boldquot.header 1970-01-01 00:00:00.000000000 +0000 @@ -1,25 +0,0 @@ -# All this catalog "translates" are quotation characters. -# The msgids must be ASCII and therefore cannot contain real quotation -# characters, only substitutes like grave accent (0x60), apostrophe (0x27) -# and double quote (0x22). These substitutes look strange; see -# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html -# -# This catalog translates grave accent (0x60) and apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019). -# It also translates pairs of apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019) -# and pairs of quotation mark (0x22) to -# left double quotation mark (U+201C) and right double quotation mark (U+201D). -# -# When output to an UTF-8 terminal, the quotation characters appear perfectly. -# When output to an ISO-8859-1 terminal, the single quotation marks are -# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to -# grave/acute accent (by libiconv), and the double quotation marks are -# transliterated to 0x22. -# When output to an ASCII terminal, the single quotation marks are -# transliterated to apostrophes, and the double quotation marks are -# transliterated to 0x22. -# -# This catalog furthermore displays the text between the quotation marks in -# bold face, assuming the VT100/XTerm escape sequences. -# Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/en_CA.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/en_CA.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/en_GB.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/en_GB.gmo differ diff -Nru eog-3.26.2/po/en@quot.header eog-3.27.90/po/en@quot.header --- eog-3.26.2/po/en@quot.header 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/po/en@quot.header 1970-01-01 00:00:00.000000000 +0000 @@ -1,22 +0,0 @@ -# All this catalog "translates" are quotation characters. -# The msgids must be ASCII and therefore cannot contain real quotation -# characters, only substitutes like grave accent (0x60), apostrophe (0x27) -# and double quote (0x22). These substitutes look strange; see -# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html -# -# This catalog translates grave accent (0x60) and apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019). -# It also translates pairs of apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019) -# and pairs of quotation mark (0x22) to -# left double quotation mark (U+201C) and right double quotation mark (U+201D). -# -# When output to an UTF-8 terminal, the quotation characters appear perfectly. -# When output to an ISO-8859-1 terminal, the single quotation marks are -# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to -# grave/acute accent (by libiconv), and the double quotation marks are -# transliterated to 0x22. -# When output to an ASCII terminal, the single quotation marks are -# transliterated to apostrophes, and the double quotation marks are -# transliterated to 0x22. -# Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/en@shaw.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/en@shaw.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/eo.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/eo.gmo differ diff -Nru eog-3.26.2/po/eog.pot eog-3.27.90/po/eog.pot --- eog-3.26.2/po/eog.pot 2017-03-07 18:12:24.000000000 +0000 +++ eog-3.27.90/po/eog.pot 1970-01-01 00:00:00.000000000 +0000 @@ -1,1539 +0,0 @@ -# SOME DESCRIPTIVE TITLE. -# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER -# This file is distributed under the same license as the PACKAGE package. -# FIRST AUTHOR , YEAR. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2017-03-07 19:12+0100\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" - -#: ../data/eog-app-menu.xml.h:1 -msgid "Prefere_nces" -msgstr "" - -#: ../data/eog-app-menu.xml.h:2 -msgid "_Keyboard Shortcuts" -msgstr "" - -#: ../data/eog-app-menu.xml.h:3 ../data/eog-preferences-dialog.ui.h:2 -msgid "_Help" -msgstr "" - -#: ../data/eog-app-menu.xml.h:4 -msgid "_About" -msgstr "" - -#: ../data/eog-app-menu.xml.h:5 -msgid "_Quit" -msgstr "" - -#: ../data/eog.appdata.xml.in.h:1 -msgid "Eye of GNOME" -msgstr "" - -#: ../data/eog.appdata.xml.in.h:2 ../data/eog.desktop.in.in.h:2 -msgid "Browse and rotate images" -msgstr "" - -#: ../data/eog.appdata.xml.in.h:3 -msgid "" -"The Eye of GNOME is the official image viewer for the GNOME desktop. It " -"integrates with the GTK+ look and feel of GNOME, and supports many image " -"formats for viewing single images or images in a collection." -msgstr "" - -#: ../data/eog.appdata.xml.in.h:4 -msgid "" -"The Eye of GNOME also allows to view the images in a fullscreen slideshow " -"mode or set an image as the desktop wallpaper. It reads the camera tags to " -"automatically rotate your images in the correct portrait or landscape " -"orientation." -msgstr "" - -#: ../data/eog.desktop.in.in.h:1 ../src/eog-application.c:312 -#: ../src/eog-window.c:5508 -msgid "Image Viewer" -msgstr "" - -#. Extra keywords that can be used to search for eog in GNOME Shell and Unity -#: ../data/eog.desktop.in.in.h:4 -msgid "Picture;Slideshow;Graphics;" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:1 -msgid "_Open…" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:2 -msgid "Open _With" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:3 ../data/popup-menus.ui.h:2 -#: ../src/eog-close-confirmation-dialog.c:178 ../src/eog-file-chooser.c:465 -msgid "_Save" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:4 ../data/popup-menus.ui.h:3 -#: ../src/eog-error-message-area.c:133 -msgid "Save _As…" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:5 ../data/popup-menus.ui.h:4 -msgid "_Print…" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:6 ../data/popup-menus.ui.h:8 -msgid "Set as Wa_llpaper" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:7 -msgid "Sli_deshow" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:8 -msgid "S_ide Pane" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:9 -msgid "Image _Gallery" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:10 -msgid "S_tatus Bar" -msgstr "" - -#: ../data/eog-gear-menu.ui.h:11 ../data/popup-menus.ui.h:7 -msgid "Prope_rties" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:1 -msgid "Image Properties" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:2 -msgid "Previous" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:3 -msgid "Next" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:4 -msgid "Name:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:5 -msgid "Width:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:6 -msgid "Height:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:7 -msgid "Type:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:8 -msgid "Bytes:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:9 -msgid "Folder:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:10 -msgid "General" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:11 -msgid "Aperture Value:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:12 -msgid "Exposure Time:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:13 -msgid "Focal Length:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:14 -msgid "Flash:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:15 -msgid "ISO Speed Rating:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:16 -msgid "Metering Mode:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:17 -msgid "Camera Model:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:18 -msgid "Date/Time:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:19 -msgid "Description:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:20 -msgid "Location:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:21 -msgid "Keywords:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:22 -msgid "Author:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:23 -msgid "Copyright:" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:24 -msgid "Details" -msgstr "" - -#: ../data/eog-image-properties-dialog.ui.h:25 -msgid "Metadata" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:1 -msgid "Save As" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:2 -#: ../src/eog-close-confirmation-dialog.c:172 -#: ../src/eog-error-message-area.c:123 ../src/eog-file-chooser.c:456 -#: ../src/eog-file-chooser.c:464 ../src/eog-file-chooser.c:472 -#: ../src/eog-window.c:3223 ../src/eog-window.c:3226 ../src/eog-window.c:3479 -msgid "_Cancel" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:3 -#: ../src/eog-close-confirmation-dialog.c:184 -msgid "Save _As" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:5 -#, no-c-format -msgid "%f: original filename" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:7 -#, no-c-format -msgid "%n: counter" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:8 -msgid "_Filename format:" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:9 -msgid "_Destination folder:" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:10 -msgid "Choose a folder" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:11 -msgid "File Path Specifications" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:12 -msgid "_Start counter at:" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:13 -msgid "_Replace spaces with underscores" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:14 -msgid "Options" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:15 -msgid "Rename from:" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:16 -msgid "To:" -msgstr "" - -#: ../data/eog-multiple-save-as-dialog.ui.h:17 -msgid "File Name Preview" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:1 -msgid "Preferences" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:3 -msgid "Image Enhancements" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:4 -msgid "Smooth images when zoomed _out" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:5 -msgid "Smooth images when zoomed _in" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:6 -msgid "_Automatic orientation" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:7 -msgid "Background" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:8 -msgid "As custom color:" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:9 -#: ../data/org.gnome.eog.gschema.xml.in.h:3 -msgid "Background Color" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:10 -msgid "Transparent Parts" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:11 -msgid "As check _pattern" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:12 -msgid "As custom c_olor:" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:13 -msgid "Color for Transparent Areas" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:14 -msgid "As _background" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:15 -msgid "Image View" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:16 -msgid "Image Zoom" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:17 -msgid "E_xpand images to fit screen" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:18 -msgid "Sequence" -msgstr "" - -#. I18N: This sentence will be displayed above a horizonzal scale to select a number of seconds in eog -#: ../data/eog-preferences-dialog.ui.h:20 -msgid "_Time between images:" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:21 -msgid "_Loop sequence" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:22 -msgid "Slideshow" -msgstr "" - -#: ../data/eog-preferences-dialog.ui.h:23 -msgid "Plugins" -msgstr "" - -#: ../data/eog-zoom-entry.ui.h:1 ../data/fullscreen-toolbar.ui.h:11 -msgid "Shrink the image" -msgstr "" - -#: ../data/eog-zoom-entry.ui.h:2 ../data/fullscreen-toolbar.ui.h:9 -msgid "Enlarge the image" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:1 -msgid "Go to the first image of the gallery" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:2 -msgid "_First Image" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:3 ../src/eog-scroll-view.c:2359 -msgid "Go to the previous image of the gallery" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:4 -msgid "_Previous Image" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:5 ../src/eog-scroll-view.c:2347 -msgid "Go to the next image of the gallery" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:6 -msgid "_Next Image" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:7 -msgid "Go to the last image of the gallery" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:8 -msgid "_Last Image" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:10 -msgid "_Zoom In" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:12 -msgid "Zoom _Out" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:13 -msgid "_Normal Size" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:14 -msgid "_Best Fit" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:15 ../src/eog-scroll-view.c:2374 -msgid "Rotate the image 90 degrees to the left" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:16 -msgid "Rotate Counter_clockwise" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:17 ../src/eog-scroll-view.c:2385 -msgid "Rotate the image 90 degrees to the right" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:18 -msgid "_Rotate Clockwise" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:19 -msgid "Changes the visibility of the image gallery pane in the current window" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:20 -msgid "_Image Gallery" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:21 -msgid "Pause or resume the slideshow" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:22 -msgid "_Leave Fullscreen" -msgstr "" - -#: ../data/fullscreen-toolbar.ui.h:23 -msgid "Leave fullscreen mode" -msgstr "" - -#: ../data/help-overlay.ui.h:1 -msgctxt "shortcut window" -msgid "General" -msgstr "" - -#: ../data/help-overlay.ui.h:2 -msgctxt "shortcut window" -msgid "Open an image file" -msgstr "" - -#: ../data/help-overlay.ui.h:3 -msgctxt "shortcut window" -msgid "Save the image" -msgstr "" - -#: ../data/help-overlay.ui.h:4 -msgctxt "shortcut window" -msgid "Save the image with a new file name" -msgstr "" - -#: ../data/help-overlay.ui.h:5 -msgctxt "shortcut window" -msgid "Print the current image" -msgstr "" - -#: ../data/help-overlay.ui.h:6 -msgctxt "shortcut window" -msgid "Close the current window" -msgstr "" - -#: ../data/help-overlay.ui.h:7 -msgctxt "shortcut window" -msgid "Close all windows" -msgstr "" - -#: ../data/help-overlay.ui.h:8 -msgctxt "shortcut window" -msgid "Set the image as desktop background" -msgstr "" - -#: ../data/help-overlay.ui.h:9 -msgctxt "shortcut window" -msgid "Show/Hide the sidebar" -msgstr "" - -#: ../data/help-overlay.ui.h:10 -msgctxt "shortcut window" -msgid "Show image properties dialog" -msgstr "" - -#: ../data/help-overlay.ui.h:11 -msgctxt "shortcut window" -msgid "Open the application manual" -msgstr "" - -#: ../data/help-overlay.ui.h:12 -msgctxt "shortcut window" -msgid "Zoom" -msgstr "" - -#: ../data/help-overlay.ui.h:13 -msgctxt "shortcut window" -msgid "Zoom in" -msgstr "" - -#: ../data/help-overlay.ui.h:14 -msgctxt "shortcut window" -msgid "Zoom out" -msgstr "" - -#: ../data/help-overlay.ui.h:15 -msgctxt "shortcut window" -msgid "Actual size" -msgstr "" - -#: ../data/help-overlay.ui.h:16 -msgctxt "shortcut window" -msgid "Best fit" -msgstr "" - -#: ../data/help-overlay.ui.h:17 -msgctxt "shortcut window" -msgid "Browsing Images" -msgstr "" - -#: ../data/help-overlay.ui.h:18 -msgctxt "shortcut window" -msgid "Go to the previous image in the folder" -msgstr "" - -#: ../data/help-overlay.ui.h:19 -msgctxt "shortcut window" -msgid "Go to the next image in the folder" -msgstr "" - -#: ../data/help-overlay.ui.h:20 -msgctxt "shortcut window" -msgid "Go to the first image in the folder" -msgstr "" - -#: ../data/help-overlay.ui.h:21 -msgctxt "shortcut window" -msgid "Go to the last image in the folder" -msgstr "" - -#: ../data/help-overlay.ui.h:22 -msgctxt "shortcut window" -msgid "Go to a random image in the folder" -msgstr "" - -#: ../data/help-overlay.ui.h:23 -msgctxt "shortcut window" -msgid "Show/Hide the image gallery" -msgstr "" - -#: ../data/help-overlay.ui.h:24 -msgctxt "shortcut window" -msgid "Rotation" -msgstr "" - -#: ../data/help-overlay.ui.h:25 -msgctxt "shortcut window" -msgid "Rotate clockwise" -msgstr "" - -#: ../data/help-overlay.ui.h:26 -msgctxt "shortcut window" -msgid "Rotate counterclockwise" -msgstr "" - -#: ../data/help-overlay.ui.h:27 -msgctxt "shortcut window" -msgid "Fullscreen" -msgstr "" - -#: ../data/help-overlay.ui.h:28 -msgctxt "shortcut window" -msgid "Enter/Leave fullscreen" -msgstr "" - -#: ../data/help-overlay.ui.h:29 -msgctxt "shortcut window" -msgid "Start/Stop slideshow" -msgstr "" - -#: ../data/help-overlay.ui.h:30 -msgctxt "shortcut window" -msgid "Pause slideshow" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:1 ../src/eog-print-image-setup.c:969 -msgid "Size" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:2 -msgid "Type" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:3 -msgid "File Size" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:4 -msgid "Folder" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:5 -msgid "Aperture" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:6 -msgid "Exposure" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:7 -msgid "ISO" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:8 -msgid "Metering" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:9 ../src/eog-metadata-details.c:65 -msgid "Camera" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:10 -msgid "Date" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:11 -msgid "Time" -msgstr "" - -#: ../data/metadata-sidebar.ui.h:12 -msgid "Focal Length" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:1 -msgid "Automatic orientation" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:2 -msgid "" -"Whether the image should be rotated automatically based on EXIF orientation." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:4 -msgid "" -"The color that is used to fill the area behind the image. If the use-" -"background-color key is not set, the color is determined by the active GTK+ " -"theme instead." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:5 -msgid "Interpolate Image" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:6 -msgid "" -"Whether the image should be interpolated on zoom-out. This leads to better " -"quality but is somewhat slower than non-interpolated images." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:7 -msgid "Extrapolate Image" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:8 -msgid "" -"Whether the image should be extrapolated on zoom-in. This leads to blurry " -"quality and is somewhat slower than non-extrapolated images." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:9 -msgid "Transparency indicator" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:10 -msgid "" -"Determines how transparency should be indicated. Valid values are " -"CHECK_PATTERN, COLOR and NONE. If COLOR is chosen, then the trans-color key " -"determines the color value used." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:11 -msgid "Scroll wheel zoom" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:12 -msgid "Whether the scroll wheel should be used for zooming." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:13 -msgid "Zoom multiplier" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:15 -#, no-c-format -msgid "" -"The multiplier to be applied when using the mouse scroll wheel for zooming. " -"This value defines the zooming step used for each scroll event. For example, " -"0.05 results in a 5% zoom increment for each scroll event and 1.00 result in " -"a 100% zoom increment." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:16 -msgid "Transparency color" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:17 -msgid "" -"If the transparency key has the value COLOR, then this key determines the " -"color which is used for indicating transparency." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:18 -msgid "Use a custom background color" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:19 -msgid "" -"If this is active, the color set by the background-color key will be used to " -"fill the area behind the image. If it is not set, the current GTK+ theme " -"will determine the fill color." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:20 -msgid "Loop through the image sequence" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:21 -msgid "Whether the sequence of images should be shown in an endless loop." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:23 -#, no-c-format -msgid "Allow zoom greater than 100% initially" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:24 -msgid "" -"If this is set to FALSE small images will not be stretched to fit into the " -"screen initially." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:25 -msgid "Delay in seconds until showing the next image" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:26 -msgid "" -"A value greater than 0 determines the seconds an image stays on screen until " -"the next one is shown automatically. Zero disables the automatic browsing." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:27 -msgid "Show/Hide the window statusbar." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:28 -msgid "Show/Hide the image gallery pane." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:29 -msgid "" -"Image gallery pane position. Set to 0 for bottom; 1 for left; 2 for top; 3 " -"for right." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:30 -msgid "Whether the image gallery pane should be resizable." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:31 -msgid "Show/Hide the window side pane." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:32 -msgid "Show/Hide the image gallery pane scroll buttons." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:33 -msgid "Close main window without asking to save changes." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:34 -msgid "Trash images without asking" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:35 -msgid "" -"If activated, Eye of GNOME won’t ask for confirmation when moving images to " -"the trash. It will still ask if any of the files cannot be moved to the " -"trash and would be deleted instead." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:36 -msgid "" -"Whether the file chooser should show the user’s pictures folder if no images " -"are loaded." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:37 -msgid "" -"If activated and no image is loaded in the active window, the file chooser " -"will display the user’s pictures folder using the XDG special user " -"directories. If deactivated or the pictures folder has not been set up, it " -"will show the current working directory." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:38 -msgid "" -"Whether the metadata list in the properties dialog should have its own page." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:39 -msgid "" -"If activated, the detailed metadata list in the properties dialog will be " -"moved to its own page in the dialog. This should make the dialog more usable " -"on smaller screens, e.g. as used by netbooks. If disabled, the widget will " -"be embedded on the “Metadata” page." -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:40 -msgid "Active plugins" -msgstr "" - -#: ../data/org.gnome.eog.gschema.xml.in.h:41 -msgid "" -"List of active plugins. It doesn’t contain the “Location” of the active " -"plugins. See the .eog-plugin file for obtaining the “Location” of a given " -"plugin." -msgstr "" - -#: ../data/popup-menus.ui.h:1 -msgid "Open _with" -msgstr "" - -#: ../data/popup-menus.ui.h:5 -msgid "_Copy" -msgstr "" - -#: ../data/popup-menus.ui.h:6 ../src/eog-window.c:3482 -msgid "Move to _Trash" -msgstr "" - -#: ../data/popup-menus.ui.h:9 -msgid "Show Containing _Folder" -msgstr "" - -#: ../data/popup-menus.ui.h:10 -msgid "_Best fit" -msgstr "" - -#: ../plugins/fullscreen/fullscreen.plugin.desktop.in.h:1 -msgid "Fullscreen with double-click" -msgstr "" - -#: ../plugins/fullscreen/fullscreen.plugin.desktop.in.h:2 -msgid "Activate fullscreen mode with double-click" -msgstr "" - -#: ../plugins/reload/eog-reload-plugin.c:185 -#: ../plugins/reload/reload.plugin.desktop.in.h:1 -msgid "Reload Image" -msgstr "" - -#: ../plugins/reload/reload.plugin.desktop.in.h:2 -msgid "Reload current image" -msgstr "" - -#: ../plugins/statusbar-date/statusbar-date.plugin.desktop.in.h:1 -msgid "Date in statusbar" -msgstr "" - -#: ../plugins/statusbar-date/statusbar-date.plugin.desktop.in.h:2 -msgid "Shows the image date in the window statusbar" -msgstr "" - -#: ../src/eog-close-confirmation-dialog.c:166 -msgid "Close _without Saving" -msgstr "" - -#: ../src/eog-close-confirmation-dialog.c:212 -msgid "Question" -msgstr "" - -#: ../src/eog-close-confirmation-dialog.c:391 -msgid "If you don’t save, your changes will be lost." -msgstr "" - -#: ../src/eog-close-confirmation-dialog.c:437 -#, c-format -msgid "Save changes to image “%s” before closing?" -msgstr "" - -#: ../src/eog-close-confirmation-dialog.c:652 -#, c-format -msgid "There is %d image with unsaved changes. Save changes before closing?" -msgid_plural "" -"There are %d images with unsaved changes. Save changes before closing?" -msgstr[0] "" -msgstr[1] "" - -#: ../src/eog-close-confirmation-dialog.c:669 -msgid "S_elect the images you want to save:" -msgstr "" - -#. Secondary label -#: ../src/eog-close-confirmation-dialog.c:688 -msgid "If you don’t save, all your changes will be lost." -msgstr "" - -#: ../src/eog-error-message-area.c:128 ../src/eog-window.c:881 -msgid "_Reload" -msgstr "" - -#: ../src/eog-error-message-area.c:137 -msgid "Open with _Document Viewer" -msgstr "" - -#: ../src/eog-error-message-area.c:219 -#, c-format -msgid "Could not load image “%s”." -msgstr "" - -#: ../src/eog-error-message-area.c:261 -#, c-format -msgid "Could not save image “%s”." -msgstr "" - -#: ../src/eog-error-message-area.c:304 -#, c-format -msgid "No images found in “%s”." -msgstr "" - -#: ../src/eog-error-message-area.c:311 -msgid "The given locations contain no images." -msgstr "" - -#: ../src/eog-error-message-area.c:350 -msgid "" -"This image contains multiple pages. Image Viewer displays only the first " -"page.\n" -"Do you want to open the image with the Document Viewer to see all pages?" -msgstr "" - -#: ../src/eog-error-message-area.c:355 -msgid "" -"This image contains multiple pages. Image Viewer displays only the first " -"page.\n" -"You may want to install the Document Viewer to see all pages." -msgstr "" - -#. A strftime-formatted string, to display the date the image was taken. -#: ../src/eog-exif-util.c:189 ../src/eog-exif-util.c:191 -msgid "%a, %d %B %Y %X" -msgstr "" - -#. TRANSLATORS: This is the actual focal length used when -#. the image was taken. -#: ../src/eog-exif-util.c:280 -#, c-format -msgid "%.1f (lens)" -msgstr "" - -#. Print as float to get a similar look as above. -#. TRANSLATORS: This is the equivalent focal length assuming -#. a 35mm film camera. -#: ../src/eog-exif-util.c:291 -#, c-format -msgid "%.1f (35mm film)" -msgstr "" - -#: ../src/eog-file-chooser.c:119 -msgid "File format is unknown or unsupported" -msgstr "" - -#: ../src/eog-file-chooser.c:124 -msgid "" -"Image Viewer could not determine a supported writable file format based on " -"the filename." -msgstr "" - -#: ../src/eog-file-chooser.c:125 -msgid "Please try a different file extension like .png or .jpg." -msgstr "" - -#. Filter name: First description then file extension, eg. "The PNG-Format (*.png)". -#: ../src/eog-file-chooser.c:160 -#, c-format -msgid "%s (*.%s)" -msgstr "" - -#: ../src/eog-file-chooser.c:212 -msgid "All files" -msgstr "" - -#: ../src/eog-file-chooser.c:217 -msgid "Supported image files" -msgstr "" - -#. Pixel size of image: width x height in pixel -#: ../src/eog-file-chooser.c:289 ../src/eog-properties-dialog.c:165 -#: ../src/eog-properties-dialog.c:167 ../src/eog-thumb-view.c:515 -msgid "pixel" -msgid_plural "pixels" -msgstr[0] "" -msgstr[1] "" - -#: ../src/eog-file-chooser.c:457 ../src/eog-file-chooser.c:473 -msgid "_Open" -msgstr "" - -#: ../src/eog-file-chooser.c:459 -msgid "Open Image" -msgstr "" - -#: ../src/eog-file-chooser.c:467 -msgid "Save Image" -msgstr "" - -#: ../src/eog-file-chooser.c:475 -msgid "Open Folder" -msgstr "" - -#: ../src/eog-image.c:566 -#, c-format -msgid "Transformation on unloaded image." -msgstr "" - -#: ../src/eog-image.c:594 -#, c-format -msgid "Transformation failed." -msgstr "" - -#: ../src/eog-image.c:1074 -#, c-format -msgid "EXIF not supported for this file format." -msgstr "" - -#: ../src/eog-image.c:1221 -#, c-format -msgid "Image loading failed." -msgstr "" - -#: ../src/eog-image.c:1802 ../src/eog-image.c:1922 -#, c-format -msgid "No image loaded." -msgstr "" - -#: ../src/eog-image.c:1810 ../src/eog-image.c:1931 -#, c-format -msgid "You do not have the permissions necessary to save the file." -msgstr "" - -#: ../src/eog-image.c:1820 ../src/eog-image.c:1942 -#, c-format -msgid "Temporary file creation failed." -msgstr "" - -#: ../src/eog-image-jpeg.c:374 -#, c-format -msgid "Couldn’t create temporary file for saving: %s" -msgstr "" - -#: ../src/eog-image-jpeg.c:393 -#, c-format -msgid "Couldn’t allocate memory for loading JPEG file" -msgstr "" - -#: ../src/eog-metadata-details.c:66 -msgid "Image Data" -msgstr "" - -#: ../src/eog-metadata-details.c:67 -msgid "Image Taking Conditions" -msgstr "" - -#: ../src/eog-metadata-details.c:68 -msgid "GPS Data" -msgstr "" - -#: ../src/eog-metadata-details.c:69 -msgid "Maker Note" -msgstr "" - -#: ../src/eog-metadata-details.c:70 -msgid "Other" -msgstr "" - -#: ../src/eog-metadata-details.c:72 -msgid "XMP Exif" -msgstr "" - -#: ../src/eog-metadata-details.c:73 -msgid "XMP IPTC" -msgstr "" - -#: ../src/eog-metadata-details.c:74 -msgid "XMP Rights Management" -msgstr "" - -#: ../src/eog-metadata-details.c:75 -msgid "XMP Other" -msgstr "" - -#: ../src/eog-metadata-details.c:251 -msgid "Tag" -msgstr "" - -#: ../src/eog-metadata-details.c:258 -msgid "Value" -msgstr "" - -#: ../src/eog-metadata-details.c:434 -msgid "North" -msgstr "" - -#: ../src/eog-metadata-details.c:437 -msgid "East" -msgstr "" - -#: ../src/eog-metadata-details.c:440 -msgid "West" -msgstr "" - -#: ../src/eog-metadata-details.c:443 -msgid "South" -msgstr "" - -#: ../src/eog-metadata-sidebar.c:144 -#, c-format -msgid "%i × %i pixel" -msgid_plural "%i × %i pixels" -msgstr[0] "" -msgstr[1] "" - -#: ../src/eog-metadata-sidebar.c:155 ../src/eog-properties-dialog.c:182 -msgid "Unknown" -msgstr "" - -#: ../src/eog-metadata-sidebar.c:219 -msgid "%a, %d %B %Y" -msgstr "" - -#: ../src/eog-metadata-sidebar.c:223 -#, c-format -msgid "%X" -msgstr "" - -#: ../src/eog-preferences-dialog.c:125 -#, c-format -msgid "%lu second" -msgid_plural "%lu seconds" -msgstr[0] "" -msgstr[1] "" - -#: ../src/eog-print.c:371 -msgid "Image Settings" -msgstr "" - -#: ../src/eog-print-image-setup.c:897 -msgid "Image" -msgstr "" - -#: ../src/eog-print-image-setup.c:898 -msgid "The image whose printing properties will be set up" -msgstr "" - -#: ../src/eog-print-image-setup.c:904 -msgid "Page Setup" -msgstr "" - -#: ../src/eog-print-image-setup.c:905 -msgid "The information for the page where the image will be printed" -msgstr "" - -#: ../src/eog-print-image-setup.c:931 -msgid "Position" -msgstr "" - -#: ../src/eog-print-image-setup.c:935 -msgid "_Left:" -msgstr "" - -#: ../src/eog-print-image-setup.c:937 -msgid "_Right:" -msgstr "" - -#: ../src/eog-print-image-setup.c:938 -msgid "_Top:" -msgstr "" - -#: ../src/eog-print-image-setup.c:939 -msgid "_Bottom:" -msgstr "" - -#: ../src/eog-print-image-setup.c:942 -msgid "C_enter:" -msgstr "" - -#: ../src/eog-print-image-setup.c:947 -msgid "None" -msgstr "" - -#: ../src/eog-print-image-setup.c:949 -msgid "Horizontal" -msgstr "" - -#: ../src/eog-print-image-setup.c:951 -msgid "Vertical" -msgstr "" - -#: ../src/eog-print-image-setup.c:953 -msgid "Both" -msgstr "" - -#: ../src/eog-print-image-setup.c:972 -msgid "_Width:" -msgstr "" - -#: ../src/eog-print-image-setup.c:974 -msgid "_Height:" -msgstr "" - -#: ../src/eog-print-image-setup.c:977 -msgid "_Scaling:" -msgstr "" - -#: ../src/eog-print-image-setup.c:988 -msgid "_Unit:" -msgstr "" - -#: ../src/eog-print-image-setup.c:993 -msgid "Millimeters" -msgstr "" - -#: ../src/eog-print-image-setup.c:995 -msgid "Inches" -msgstr "" - -#: ../src/eog-print-image-setup.c:1024 -msgid "Preview" -msgstr "" - -#: ../src/eog-properties-dialog.c:776 -msgid "Show the folder which contains this file in the file manager" -msgstr "" - -#: ../src/eog-save-as-dialog-helper.c:162 -msgid "as is" -msgstr "" - -#. Translators: This string is displayed in the statusbar. -#. * The first token is the image number, the second is total image -#. * count. -#. * -#. * Translate to "%Id" if you want to use localized digits, or -#. * translate to "%d" otherwise. -#. * -#. * Note that translating this doesn't guarantee that you get localized -#. * digits. That needs support from your system and locale definition -#. * too. -#: ../src/eog-statusbar.c:118 -#, c-format -msgid "%d / %d" -msgstr "" - -#: ../src/eog-thumb-view.c:543 -msgid "Taken on" -msgstr "" - -#: ../src/eog-uri-converter.c:989 -#, c-format -msgid "At least two file names are equal." -msgstr "" - -#: ../src/eog-util.c:68 -msgid "Could not display help for Image Viewer" -msgstr "" - -#: ../src/eog-util.c:116 -msgid " (invalid Unicode)" -msgstr "" - -#. Translators: This is the string displayed in the statusbar -#. * The tokens are from left to right: -#. * - image width -#. * - image height -#. * - image size in bytes -#. * - zoom in percent -#: ../src/eog-window.c:543 -#, c-format -msgid "%i × %i pixel %s %i%%" -msgid_plural "%i × %i pixels %s %i%%" -msgstr[0] "" -msgstr[1] "" - -#: ../src/eog-window.c:883 ../src/eog-window.c:2617 -msgctxt "MessageArea" -msgid "Hi_de" -msgstr "" - -#. The newline character is currently necessary due to a problem -#. * with the automatic line break. -#: ../src/eog-window.c:893 -#, c-format -msgid "" -"The image “%s” has been modified by an external application.\n" -"Would you like to reload it?" -msgstr "" - -#. Translators: This string is displayed in the statusbar -#. * while saving images. The tokens are from left to right: -#. * - the original filename -#. * - the current image's position in the queue -#. * - the total number of images queued for saving -#: ../src/eog-window.c:1156 -#, c-format -msgid "Saving image “%s” (%u/%u)" -msgstr "" - -#: ../src/eog-window.c:1581 -#, c-format -msgid "Opening image “%s”" -msgstr "" - -#. L10N: This the reason why the screensaver is inhibited. -#: ../src/eog-window.c:1964 -msgid "Viewing a slideshow" -msgstr "" - -#: ../src/eog-window.c:2183 -#, c-format -msgid "" -"Error printing file:\n" -"%s" -msgstr "" - -#: ../src/eog-window.c:2566 ../src/eog-window.c:2581 -msgid "Error launching System Settings: " -msgstr "" - -#: ../src/eog-window.c:2615 -msgid "_Open Background Preferences" -msgstr "" - -#. The newline character is currently necessary due to a problem -#. * with the automatic line break. -#: ../src/eog-window.c:2631 -#, c-format -msgid "" -"The image “%s” has been set as Desktop Background.\n" -"Would you like to modify its appearance?" -msgstr "" - -#: ../src/eog-window.c:3121 -msgid "Saving image locally…" -msgstr "" - -#: ../src/eog-window.c:3199 -#, c-format -msgid "" -"Are you sure you want to remove\n" -"“%s” permanently?" -msgstr "" - -#: ../src/eog-window.c:3202 -#, c-format -msgid "" -"Are you sure you want to remove\n" -"the selected image permanently?" -msgid_plural "" -"Are you sure you want to remove\n" -"the %d selected images permanently?" -msgstr[0] "" -msgstr[1] "" - -#: ../src/eog-window.c:3224 ../src/eog-window.c:3490 -msgid "_Delete" -msgstr "" - -#: ../src/eog-window.c:3227 ../src/eog-window.c:3492 -msgid "_Yes" -msgstr "" - -#. add 'dont ask again' button -#: ../src/eog-window.c:3231 ../src/eog-window.c:3484 -msgid "Do _not ask again during this session" -msgstr "" - -#: ../src/eog-window.c:3275 -#, c-format -msgid "Couldn’t retrieve image file" -msgstr "" - -#: ../src/eog-window.c:3291 -#, c-format -msgid "Couldn’t retrieve image file information" -msgstr "" - -#: ../src/eog-window.c:3307 ../src/eog-window.c:3551 -#, c-format -msgid "Couldn’t delete file" -msgstr "" - -#. set dialog error message -#: ../src/eog-window.c:3357 ../src/eog-window.c:3651 -#, c-format -msgid "Error on deleting image %s" -msgstr "" - -#: ../src/eog-window.c:3452 -#, c-format -msgid "" -"Are you sure you want to move\n" -"“%s” to the trash?" -msgstr "" - -#: ../src/eog-window.c:3455 -#, c-format -msgid "" -"A trash for “%s” couldn’t be found. Do you want to remove this image " -"permanently?" -msgstr "" - -#: ../src/eog-window.c:3460 -#, c-format -msgid "" -"Are you sure you want to move\n" -"the selected image to the trash?" -msgid_plural "" -"Are you sure you want to move\n" -"the %d selected images to the trash?" -msgstr[0] "" -msgstr[1] "" - -#: ../src/eog-window.c:3465 -msgid "" -"Some of the selected images can’t be moved to the trash and will be removed " -"permanently. Are you sure you want to proceed?" -msgstr "" - -#: ../src/eog-window.c:3529 ../src/eog-window.c:3543 -#, c-format -msgid "Couldn’t access trash." -msgstr "" - -#: ../src/eog-window.c:4210 -msgid "Shrink or enlarge the current image" -msgstr "" - -#: ../src/eog-window.c:4269 -msgid "Show the current image in fullscreen mode" -msgstr "" - -#: ../src/eog-window.c:4346 -msgid "Properties" -msgstr "" - -#: ../src/eog-window.c:5511 -msgid "The GNOME image viewer." -msgstr "" - -#: ../src/eog-window.c:5514 -msgid "translator-credits" -msgstr "" - -#. L10N: This is a percentage value used for the image zoom. -#. * This should be translated similar to the statusbar zoom value. -#: ../src/eog-zoom-entry.c:81 -#, c-format -msgid "%d%%" -msgstr "" - -#: ../src/main.c:56 -msgid "GNOME Image Viewer" -msgstr "" - -#: ../src/main.c:63 -msgid "Open in fullscreen mode" -msgstr "" - -#: ../src/main.c:64 -msgid "Disable image gallery" -msgstr "" - -#: ../src/main.c:65 -msgid "Open in slideshow mode" -msgstr "" - -#: ../src/main.c:66 -msgid "Start a new instance instead of reusing an existing one" -msgstr "" - -#: ../src/main.c:67 -msgid "" -"Open in a single window, if multiple windows are open the first one is used" -msgstr "" - -#: ../src/main.c:69 -msgid "Show the application’s version" -msgstr "" - -#: ../src/main.c:99 -msgid "[FILE…]" -msgstr "" - -#. I18N: The '%s' is replaced with eog's command name. -#: ../src/main.c:112 -#, c-format -msgid "Run “%s --help” to see a full list of available command line options." -msgstr "" Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/es.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/es.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/et.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/et.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/eu.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/eu.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/fa.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/fa.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/fi.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/fi.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/fr.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/fr.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/fur.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/fur.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/fy.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/fy.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ga.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ga.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/gd.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/gd.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/gl.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/gl.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/gu.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/gu.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/he.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/he.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/hi.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/hi.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/hr.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/hr.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/hu.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/hu.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/id.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/id.gmo differ diff -Nru eog-3.26.2/po/insert-header.sin eog-3.27.90/po/insert-header.sin --- eog-3.26.2/po/insert-header.sin 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/po/insert-header.sin 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ -# Sed script that inserts the file called HEADER before the header entry. -# -# At each occurrence of a line starting with "msgid ", we execute the following -# commands. At the first occurrence, insert the file. At the following -# occurrences, do nothing. The distinction between the first and the following -# occurrences is achieved by looking at the hold space. -/^msgid /{ -x -# Test if the hold space is empty. -s/m/m/ -ta -# Yes it was empty. First occurrence. Read the file. -r HEADER -# Output the file's contents by reading the next line. But don't lose the -# current line while doing this. -g -N -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/is.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/is.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/it.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/it.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ja.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ja.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ka.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ka.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/kk.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/kk.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/km.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/km.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/kn.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/kn.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ko.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ko.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ks.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ks.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ku.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ku.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/lt.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/lt.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/lv.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/lv.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/mai.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/mai.gmo differ diff -Nru eog-3.26.2/po/Makefile.in.in eog-3.27.90/po/Makefile.in.in --- eog-3.26.2/po/Makefile.in.in 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/po/Makefile.in.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,483 +0,0 @@ -# Makefile for PO directory in any package using GNU gettext. -# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper -# -# Copying and distribution of this file, with or without modification, -# are permitted in any medium without royalty provided the copyright -# notice and this notice are preserved. This file is offered as-is, -# without any warranty. -# -# Origin: gettext-0.19.7 -GETTEXT_MACRO_VERSION = 0.19 - -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ - -SED = @SED@ -SHELL = /bin/sh -@SET_MAKE@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -datarootdir = @datarootdir@ -datadir = @datadir@ -localedir = @localedir@ -gettextsrcdir = $(datadir)/gettext/po - -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ - -# We use $(mkdir_p). -# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as -# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, -# @install_sh@ does not start with $(SHELL), so we add it. -# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined -# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake -# versions, $(mkinstalldirs) and $(install_sh) are unused. -mkinstalldirs = $(SHELL) @install_sh@ -d -install_sh = $(SHELL) @install_sh@ -MKDIR_P = @MKDIR_P@ -mkdir_p = @mkdir_p@ - -# When building gettext-tools, we prefer to use the built programs -# rather than installed programs. However, we can't do that when we -# are cross compiling. -CROSS_COMPILING = @CROSS_COMPILING@ - -GMSGFMT_ = @GMSGFMT@ -GMSGFMT_no = @GMSGFMT@ -GMSGFMT_yes = @GMSGFMT_015@ -GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) -MSGFMT_ = @MSGFMT@ -MSGFMT_no = @MSGFMT@ -MSGFMT_yes = @MSGFMT_015@ -MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) -XGETTEXT_ = @XGETTEXT@ -XGETTEXT_no = @XGETTEXT@ -XGETTEXT_yes = @XGETTEXT_015@ -XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) -MSGMERGE = msgmerge -MSGMERGE_UPDATE = @MSGMERGE@ --update -MSGINIT = msginit -MSGCONV = msgconv -MSGFILTER = msgfilter - -POFILES = @POFILES@ -GMOFILES = @GMOFILES@ -UPDATEPOFILES = @UPDATEPOFILES@ -DUMMYPOFILES = @DUMMYPOFILES@ -DISTFILES.common = Makefile.in.in remove-potcdate.sin \ -$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) -DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ -$(POFILES) $(GMOFILES) \ -$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) - -POTFILES = \ - -CATALOGS = @CATALOGS@ - -POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot -POFILESDEPS_yes = $(POFILESDEPS_) -POFILESDEPS_no = -POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT)) - -DISTFILESDEPS_ = update-po -DISTFILESDEPS_yes = $(DISTFILESDEPS_) -DISTFILESDEPS_no = -DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO)) - -# Makevars gets inserted here. (Don't remove this line!) - -.SUFFIXES: -.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update - -.po.mo: - @echo "$(MSGFMT) -c -o $@ $<"; \ - $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ - -.po.gmo: - @lang=`echo $* | sed -e 's,.*/,,'`; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \ - cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo - -.sin.sed: - sed -e '/^#/d' $< > t-$@ - mv t-$@ $@ - - -all: all-@USE_NLS@ - -all-yes: stamp-po -all-no: - -# Ensure that the gettext macros and this Makefile.in.in are in sync. -CHECK_MACRO_VERSION = \ - test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ - || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ - exit 1; \ - } - -# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no -# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because -# we don't want to bother translators with empty POT files). We assume that -# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. -# In this case, stamp-po is a nop (i.e. a phony target). - -# stamp-po is a timestamp denoting the last time at which the CATALOGS have -# been loosely updated. Its purpose is that when a developer or translator -# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, -# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent -# invocations of "make" will do nothing. This timestamp would not be necessary -# if updating the $(CATALOGS) would always touch them; however, the rule for -# $(POFILES) has been designed to not touch files that don't need to be -# changed. -stamp-po: $(srcdir)/$(DOMAIN).pot - @$(CHECK_MACRO_VERSION) - test ! -f $(srcdir)/$(DOMAIN).pot || \ - test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) - @test ! -f $(srcdir)/$(DOMAIN).pot || { \ - echo "touch stamp-po" && \ - echo timestamp > stamp-poT && \ - mv stamp-poT stamp-po; \ - } - -# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', -# otherwise packages like GCC can not be built if only parts of the source -# have been downloaded. - -# This target rebuilds $(DOMAIN).pot; it is an expensive operation. -# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. -# The determination of whether the package xyz is a GNU one is based on the -# heuristic whether some file in the top level directory mentions "GNU xyz". -# If GNU 'find' is available, we avoid grepping through monster files. -$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed - package_gnu="$(PACKAGE_GNU)"; \ - test -n "$$package_gnu" || { \ - if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \ - LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f \ - -size -10000000c -exec grep 'GNU @PACKAGE@' \ - /dev/null '{}' ';' 2>/dev/null; \ - else \ - LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \ - fi; \ - } | grep -v 'libtool:' >/dev/null; then \ - package_gnu=yes; \ - else \ - package_gnu=no; \ - fi; \ - }; \ - if test "$$package_gnu" = "yes"; then \ - package_prefix='GNU '; \ - else \ - package_prefix=''; \ - fi; \ - if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ - msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ - else \ - msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ - fi; \ - case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - *) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --package-name="$${package_prefix}@PACKAGE@" \ - --package-version='@VERSION@' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - esac - test ! -f $(DOMAIN).po || { \ - if test -f $(srcdir)/$(DOMAIN).pot-header; then \ - sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \ - cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po; \ - rm -f $(DOMAIN).1po; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ - sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ - if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ - else \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - else \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - } - -# This rule has no dependencies: we don't need to update $(DOMAIN).pot at -# every "make" invocation, only create it when it is missing. -# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. -$(srcdir)/$(DOMAIN).pot: - $(MAKE) $(DOMAIN).pot-update - -# This target rebuilds a PO file if $(DOMAIN).pot has changed. -# Note that a PO file is not touched if it doesn't need to be changed. -$(POFILES): $(POFILESDEPS) - @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ - if test -f "$(srcdir)/$${lang}.po"; then \ - test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \ - cd $(srcdir) \ - && { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \ - esac; \ - }; \ - else \ - $(MAKE) $${lang}.po-create; \ - fi - - -install: install-exec install-data -install-exec: -install-data: install-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - for file in $(DISTFILES.common) Makevars.template; do \ - $(INSTALL_DATA) $(srcdir)/$$file \ - $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - for file in Makevars; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -install-data-no: all -install-data-yes: all - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ - $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ - echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ - fi; \ - done; \ - done - -install-strip: install - -installdirs: installdirs-exec installdirs-data -installdirs-exec: -installdirs-data: installdirs-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - else \ - : ; \ - fi -installdirs-data-no: -installdirs-data-yes: - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - fi; \ - done; \ - done - -# Define this as empty until I found a useful application. -installcheck: - -uninstall: uninstall-exec uninstall-data -uninstall-exec: -uninstall-data: uninstall-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - for file in $(DISTFILES.common) Makevars.template; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -uninstall-data-no: -uninstall-data-yes: - catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - done; \ - done - -check: all - -info dvi ps pdf html tags TAGS ctags CTAGS ID: - -mostlyclean: - rm -f remove-potcdate.sed - rm -f stamp-poT - rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po - rm -fr *.o - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES *.mo - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f stamp-po $(GMOFILES) - -distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: - test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS) - @$(MAKE) dist2 -# This is a separate target because 'update-po' must be executed before. -dist2: stamp-po $(DISTFILES) - dists="$(DISTFILES)"; \ - if test "$(PACKAGE)" = "gettext-tools"; then \ - dists="$$dists Makevars.template"; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - dists="$$dists $(DOMAIN).pot stamp-po"; \ - fi; \ - if test -f $(srcdir)/ChangeLog; then \ - dists="$$dists ChangeLog"; \ - fi; \ - for i in 0 1 2 3 4 5 6 7 8 9; do \ - if test -f $(srcdir)/ChangeLog.$$i; then \ - dists="$$dists ChangeLog.$$i"; \ - fi; \ - done; \ - if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ - for file in $$dists; do \ - if test -f $$file; then \ - cp -p $$file $(distdir) || exit 1; \ - else \ - cp -p $(srcdir)/$$file $(distdir) || exit 1; \ - fi; \ - done - -update-po: Makefile - $(MAKE) $(DOMAIN).pot-update - test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) - $(MAKE) update-gmo - -# General rule for creating PO files. - -.nop.po-create: - @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ - echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ - exit 1 - -# General rule for updating PO files. - -.nop.po-update: - @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ - cd $(srcdir); \ - if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - esac; \ - }; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -$(DUMMYPOFILES): - -update-gmo: Makefile $(GMOFILES) - @: - -# Recreate Makefile by invoking config.status. Explicitly invoke the shell, -# because execution permission bits may not work on the current file system. -# Use @SHELL@, which is the shell determined by autoconf for the use by its -# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. -Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ - cd $(top_builddir) \ - && @SHELL@ ./config.status $(subdir)/$@.in po-directories - -force: - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/po/meson.build eog-3.27.90/po/meson.build --- eog-3.26.2/po/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/po/meson.build 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1 @@ +i18n.gettext(meson.project_name(), preset: 'glib') Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/mg.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/mg.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/mk.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/mk.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ml.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ml.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/mn.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/mn.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/mr.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/mr.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ms.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ms.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/my.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/my.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/nb.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/nb.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/nds.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/nds.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ne.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ne.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/nl.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/nl.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/nn.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/nn.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/nso.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/nso.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/oc.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/oc.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/or.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/or.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/pa.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/pa.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/pl.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/pl.gmo differ diff -Nru eog-3.26.2/po/POTFILES.skip eog-3.27.90/po/POTFILES.skip --- eog-3.26.2/po/POTFILES.skip 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/po/POTFILES.skip 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,3 @@ +# List of source files that should *not* be translated. +# Please keep this file sorted alphabetically. +data/eog.desktop.in Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ps.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ps.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/pt_BR.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/pt_BR.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/pt.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/pt.gmo differ diff -Nru eog-3.26.2/po/quot.sed eog-3.27.90/po/quot.sed --- eog-3.26.2/po/quot.sed 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/po/quot.sed 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ -s/"\([^"]*\)"/“\1”/g -s/`\([^`']*\)'/‘\1’/g -s/ '\([^`']*\)' / ‘\1’ /g -s/ '\([^`']*\)'$/ ‘\1’/g -s/^'\([^`']*\)' /‘\1’ /g -s/“”/""/g diff -Nru eog-3.26.2/po/remove-potcdate.sin eog-3.27.90/po/remove-potcdate.sin --- eog-3.26.2/po/remove-potcdate.sin 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/po/remove-potcdate.sin 1970-01-01 00:00:00.000000000 +0000 @@ -1,19 +0,0 @@ -# Sed script that remove the POT-Creation-Date line in the header entry -# from a POT file. -# -# The distinction between the first and the following occurrences of the -# pattern is achieved by looking at the hold space. -/^"POT-Creation-Date: .*"$/{ -x -# Test if the hold space is empty. -s/P/P/ -ta -# Yes it was empty. First occurrence. Remove the line. -g -d -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ro.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ro.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ru.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ru.gmo differ diff -Nru eog-3.26.2/po/Rules-quot eog-3.27.90/po/Rules-quot --- eog-3.26.2/po/Rules-quot 2017-06-04 14:07:02.000000000 +0000 +++ eog-3.27.90/po/Rules-quot 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ -# This file, Rules-quot, can be copied and used freely without restrictions. -# Special Makefile rules for English message catalogs with quotation marks. - -DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot - -.SUFFIXES: .insert-header .po-update-en - -en@quot.po-create: - $(MAKE) en@quot.po-update -en@boldquot.po-create: - $(MAKE) en@boldquot.po-update - -en@quot.po-update: en@quot.po-update-en -en@boldquot.po-update: en@boldquot.po-update-en - -.insert-header.po-update-en: - @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - ll=`echo $$lang | sed -e 's/@.*//'`; \ - LC_ALL=C; export LC_ALL; \ - cd $(srcdir); \ - if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \ - | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \ - { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \ - $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \ - ;; \ - *) \ - $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \ - ;; \ - esac } 2>/dev/null > $$tmpdir/$$lang.new.po \ - ; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "creation of $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -en@quot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header - -en@boldquot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header - -mostlyclean: mostlyclean-quot -mostlyclean-quot: - rm -f *.insert-header Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/rw.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/rw.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/si.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/si.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/sk.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/sk.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/sl.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/sl.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/sq.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/sq.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/sr.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/sr.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/sr@latin.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/sr@latin.gmo differ diff -Nru eog-3.26.2/po/stamp-po eog-3.27.90/po/stamp-po --- eog-3.26.2/po/stamp-po 2017-06-07 19:01:11.000000000 +0000 +++ eog-3.27.90/po/stamp-po 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -timestamp Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/sv.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/sv.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ta.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ta.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/te.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/te.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/tg.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/tg.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/th.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/th.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/tk.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/tk.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/tr.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/tr.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ts.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ts.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/ug.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/ug.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/uk.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/uk.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/uz@cyrillic.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/uz@cyrillic.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/uz.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/uz.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/vi.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/vi.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/wa.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/wa.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/xh.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/xh.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/zh_CN.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/zh_CN.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/zh_HK.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/zh_HK.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/zh_TW.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/zh_TW.gmo differ Binary files /tmp/tmp7mUdP2/J5ST4lLH6R/eog-3.26.2/po/zu.gmo and /tmp/tmp7mUdP2/YI0eDYFfU1/eog-3.27.90/po/zu.gmo differ diff -Nru eog-3.26.2/src/eog-application.c eog-3.27.90/src/eog-application.c --- eog-3.26.2/src/eog-application.c 2017-02-12 18:06:53.000000000 +0000 +++ eog-3.27.90/src/eog-application.c 2018-02-12 20:46:58.000000000 +0000 @@ -230,8 +230,8 @@ "KP_Subtract", NULL, "win.zoom-normal", "0", NULL, - "win.view-gallery", "F9", NULL, - "win.view-sidebar", "F9", NULL, + "win.view-gallery", "F9", NULL, + "win.view-sidebar", "F9", NULL, "win.view-fullscreen", "F11", NULL, "win.view-slideshow", "F5", NULL, "win.toggle-zoom-fit", "F", NULL, diff -Nru eog-3.26.2/src/eog-close-confirmation-dialog.c eog-3.27.90/src/eog-close-confirmation-dialog.c --- eog-3.26.2/src/eog-close-confirmation-dialog.c 2017-01-16 20:37:29.000000000 +0000 +++ eog-3.27.90/src/eog-close-confirmation-dialog.c 2018-02-12 20:46:58.000000000 +0000 @@ -81,7 +81,7 @@ #define IMAGE_COLUMN_HEIGHT 40 -G_DEFINE_TYPE_WITH_PRIVATE(EogCloseConfirmationDialog, eog_close_confirmation_dialog, GTK_TYPE_DIALOG) +G_DEFINE_TYPE_WITH_PRIVATE(EogCloseConfirmationDialog, eog_close_confirmation_dialog, GTK_TYPE_MESSAGE_DIALOG) static void set_unsaved_image (EogCloseConfirmationDialog *dlg, const GList *list); @@ -193,24 +193,15 @@ static void eog_close_confirmation_dialog_init (EogCloseConfirmationDialog *dlg) { - AtkObject *atk_obj; - dlg->priv = eog_close_confirmation_dialog_get_instance_private (dlg); - gtk_container_set_border_width (GTK_CONTAINER (dlg), 5); - gtk_box_set_spacing (GTK_BOX (gtk_dialog_get_content_area (GTK_DIALOG (dlg))), 14); gtk_window_set_resizable (GTK_WINDOW (dlg), FALSE); - gtk_window_set_skip_taskbar_hint (GTK_WINDOW (dlg), TRUE); gtk_window_set_title (GTK_WINDOW (dlg), ""); gtk_window_set_modal (GTK_WINDOW (dlg), TRUE); gtk_window_set_destroy_with_parent (GTK_WINDOW (dlg), TRUE); - atk_obj = gtk_widget_get_accessible (GTK_WIDGET (dlg)); - atk_object_set_role (atk_obj, ATK_ROLE_ALERT); - atk_object_set_name (atk_obj, _("Question")); - g_signal_connect (dlg, "response", G_CALLBACK (response_cb), @@ -345,6 +336,7 @@ dlg = GTK_WIDGET (g_object_new (EOG_TYPE_CLOSE_CONFIRMATION_DIALOG, "unsaved_images", unsaved_images, + "message-type", GTK_MESSAGE_QUESTION, NULL)); g_return_val_if_fail (dlg != NULL, NULL); @@ -396,11 +388,6 @@ static void build_single_img_dialog (EogCloseConfirmationDialog *dlg) { - GtkWidget *hbox; - GtkWidget *vbox; - GtkWidget *primary_label; - GtkWidget *secondary_label; - GtkWidget *image; EogImage *img; const gchar *image_name; gchar *str; @@ -411,27 +398,7 @@ g_return_if_fail (dlg->priv->unsaved_images->data != NULL); img = EOG_IMAGE (dlg->priv->unsaved_images->data); - /* Image */ - image = gtk_image_new_from_icon_name ("dialog-warning-symbolic", - GTK_ICON_SIZE_DIALOG); - gtk_widget_set_valign (image, GTK_ALIGN_START); - /* Primary label */ - primary_label = gtk_label_new (NULL); - gtk_label_set_line_wrap (GTK_LABEL (primary_label), TRUE); - gtk_label_set_use_markup (GTK_LABEL (primary_label), TRUE); - gtk_widget_set_halign (primary_label, GTK_ALIGN_START); - gtk_widget_set_valign (primary_label, GTK_ALIGN_START); - gtk_label_set_max_width_chars(GTK_LABEL (primary_label), 72); - /* Allow fallback to char-based wrapping as filenames - * don't need to have "words". */ - gtk_label_set_line_wrap_mode(GTK_LABEL (primary_label), - PANGO_WRAP_WORD_CHAR); -G_GNUC_BEGIN_IGNORE_DEPRECATIONS - gtk_misc_set_alignment(GTK_MISC (primary_label), 0.0, 0.5); -G_GNUC_END_IGNORE_DEPRECATIONS - gtk_label_set_selectable (GTK_LABEL (primary_label), TRUE); - image_name = eog_image_get_caption (img); str = g_markup_printf_escaped (_("Save changes to image “%s” before closing?"), @@ -439,40 +406,16 @@ markup_str = g_strconcat ("", str, "", NULL); g_free (str); - gtk_label_set_markup (GTK_LABEL (primary_label), markup_str); + gtk_message_dialog_set_markup (GTK_MESSAGE_DIALOG (dlg), markup_str); g_free (markup_str); /* Secondary label */ str = get_text_secondary_label (img); - secondary_label = gtk_label_new (str); + //secondary_label = gtk_label_new (str); + gtk_message_dialog_format_secondary_text (GTK_MESSAGE_DIALOG (dlg), + "%s", str); g_free (str); - gtk_label_set_line_wrap (GTK_LABEL (secondary_label), TRUE); - gtk_label_set_max_width_chars(GTK_LABEL (secondary_label), 72); -G_GNUC_BEGIN_IGNORE_DEPRECATIONS - gtk_misc_set_alignment(GTK_MISC (secondary_label), 0.0, 0.5); -G_GNUC_END_IGNORE_DEPRECATIONS - gtk_widget_set_halign (secondary_label, GTK_ALIGN_START); - gtk_label_set_selectable (GTK_LABEL (secondary_label), TRUE); - - hbox = gtk_box_new (GTK_ORIENTATION_HORIZONTAL, 12); - gtk_container_set_border_width (GTK_CONTAINER (hbox), 5); - - gtk_box_pack_start (GTK_BOX (hbox), image, FALSE, FALSE, 0); - - vbox = gtk_box_new (GTK_ORIENTATION_VERTICAL, 12); - - gtk_box_pack_start (GTK_BOX (hbox), vbox, TRUE, TRUE, 0); - - gtk_box_pack_start (GTK_BOX (vbox), primary_label, TRUE, TRUE, 0); - - gtk_box_pack_start (GTK_BOX (vbox), secondary_label, TRUE, TRUE, 0); - - gtk_box_pack_start (GTK_BOX (gtk_dialog_get_content_area (GTK_DIALOG (dlg))), - hbox, - FALSE, - FALSE, - 0); if (eog_image_is_file_writable (img)) { buttons = EOG_CLOSE_CONFIRMATION_DIALOG_CLOSE_BUTTON | @@ -485,9 +428,6 @@ } add_buttons (dlg, buttons); - - - gtk_widget_show_all (hbox); } static void @@ -607,11 +547,7 @@ build_multiple_imgs_dialog (EogCloseConfirmationDialog *dlg) { EogCloseConfirmationDialogPrivate *priv; - GtkWidget *hbox; - GtkWidget *image; GtkWidget *vbox; - GtkWidget *primary_label; - GtkWidget *vbox2; GtkWidget *select_label; GtkWidget *scrolledwindow; GtkWidget *treeview; @@ -623,31 +559,7 @@ priv = dlg->priv; - hbox = gtk_box_new (GTK_ORIENTATION_HORIZONTAL, 12); - gtk_container_set_border_width (GTK_CONTAINER (hbox), 5); - gtk_box_pack_start (GTK_BOX (gtk_dialog_get_content_area (GTK_DIALOG (dlg))), - hbox, TRUE, TRUE, 0); - - /* Image */ - image = gtk_image_new_from_icon_name ("dialog-warning-symbolic", - GTK_ICON_SIZE_DIALOG); - gtk_widget_set_valign (image, GTK_ALIGN_START); - gtk_box_pack_start (GTK_BOX (hbox), image, FALSE, FALSE, 0); - - vbox = gtk_box_new (GTK_ORIENTATION_VERTICAL, 12); - gtk_box_pack_start (GTK_BOX (hbox), vbox, TRUE, TRUE, 0); - /* Primary label */ - primary_label = gtk_label_new (NULL); - gtk_label_set_line_wrap (GTK_LABEL (primary_label), TRUE); - gtk_label_set_use_markup (GTK_LABEL (primary_label), TRUE); - gtk_widget_set_halign (primary_label, GTK_ALIGN_START); - gtk_label_set_max_width_chars (GTK_LABEL (primary_label), 72); -G_GNUC_BEGIN_IGNORE_DEPRECATIONS - gtk_misc_set_alignment(GTK_MISC (primary_label), 0.0, 0.5); -G_GNUC_END_IGNORE_DEPRECATIONS - gtk_label_set_selectable (GTK_LABEL (primary_label), TRUE); - str = g_strdup_printf ( ngettext ("There is %d image with unsaved changes. " "Save changes before closing?", @@ -656,24 +568,27 @@ g_list_length (priv->unsaved_images)), g_list_length (priv->unsaved_images)); - markup_str = g_strconcat ("", str, "", NULL); + markup_str = g_strconcat ("", + str, "", NULL); g_free (str); - gtk_label_set_markup (GTK_LABEL (primary_label), markup_str); + gtk_message_dialog_set_markup (GTK_MESSAGE_DIALOG (dlg), markup_str); g_free (markup_str); - gtk_box_pack_start (GTK_BOX (vbox), primary_label, TRUE, TRUE, 0); - - vbox2 = gtk_box_new (GTK_ORIENTATION_VERTICAL, 8); - gtk_box_pack_start (GTK_BOX (vbox), vbox2, TRUE, TRUE, 0); + vbox = gtk_box_new (GTK_ORIENTATION_VERTICAL, 8); + gtk_widget_set_margin_start (vbox, 18); + gtk_widget_set_margin_end (vbox, 18); + gtk_widget_set_margin_bottom (vbox, 12); + gtk_box_pack_start (GTK_BOX (gtk_dialog_get_content_area (GTK_DIALOG (dlg))), + vbox, TRUE, TRUE, 0); select_label = gtk_label_new_with_mnemonic (_("S_elect the images you want to save:")); - gtk_box_pack_start (GTK_BOX (vbox2), select_label, FALSE, FALSE, 0); + gtk_box_pack_start (GTK_BOX (vbox), select_label, FALSE, FALSE, 0); gtk_label_set_line_wrap (GTK_LABEL (select_label), TRUE); gtk_widget_set_halign (select_label, GTK_ALIGN_START); scrolledwindow = gtk_scrolled_window_new (NULL, NULL); - gtk_box_pack_start (GTK_BOX (vbox2), scrolledwindow, TRUE, TRUE, 0); + gtk_box_pack_start (GTK_BOX (vbox), scrolledwindow, TRUE, TRUE, 0); gtk_scrolled_window_set_policy (GTK_SCROLLED_WINDOW (scrolledwindow), GTK_POLICY_AUTOMATIC, GTK_POLICY_AUTOMATIC); @@ -688,13 +603,11 @@ secondary_label = gtk_label_new (_("If you don’t save, " "all your changes will be lost.")); - gtk_box_pack_start (GTK_BOX (vbox2), secondary_label, FALSE, FALSE, 0); + gtk_box_pack_start (GTK_BOX (vbox), secondary_label, FALSE, FALSE, 0); gtk_label_set_line_wrap (GTK_LABEL (secondary_label), TRUE); gtk_label_set_max_width_chars (GTK_LABEL (secondary_label), 72); gtk_widget_set_halign (secondary_label, GTK_ALIGN_START); -G_GNUC_BEGIN_IGNORE_DEPRECATIONS - gtk_misc_set_alignment(GTK_MISC (select_label), 0.0, 0.5); -G_GNUC_END_IGNORE_DEPRECATIONS + gtk_label_set_xalign (GTK_LABEL (select_label), 0.0); gtk_label_set_selectable (GTK_LABEL (secondary_label), TRUE); gtk_label_set_mnemonic_widget (GTK_LABEL (select_label), treeview); @@ -705,7 +618,7 @@ add_buttons (dlg, buttons); - gtk_widget_show_all (hbox); + gtk_widget_show_all (vbox); } static void diff -Nru eog-3.26.2/src/eog-close-confirmation-dialog.h eog-3.27.90/src/eog-close-confirmation-dialog.h --- eog-3.26.2/src/eog-close-confirmation-dialog.h 2015-09-28 12:46:13.000000000 +0000 +++ eog-3.27.90/src/eog-close-confirmation-dialog.h 2018-02-12 20:46:58.000000000 +0000 @@ -44,7 +44,7 @@ struct _EogCloseConfirmationDialog { - GtkDialog parent; + GtkMessageDialog parent; /*< private > */ EogCloseConfirmationDialogPrivate *priv; @@ -52,7 +52,7 @@ struct _EogCloseConfirmationDialogClass { - GtkDialogClass parent_class; + GtkMessageDialogClass parent_class; }; /** diff -Nru eog-3.26.2/src/eog-metadata-reader-jpg.c eog-3.27.90/src/eog-metadata-reader-jpg.c --- eog-3.26.2/src/eog-metadata-reader-jpg.c 2015-09-28 12:46:13.000000000 +0000 +++ eog-3.27.90/src/eog-metadata-reader-jpg.c 2018-02-12 20:46:58.000000000 +0000 @@ -51,6 +51,10 @@ EJA_OTHER } EogJpegApp1Type; +/* This enables color profile generation from Exif valus. However it's + * uncertain how well maintained that information is since applications like + * GIMP ignore this data. */ +#define EOG_METADATA_READER_JPG_GEN_PROFILE_FROM_EXIF_VALUES 0 #define EOG_JPEG_MARKER_START 0xFF #define EOG_JPEG_MARKER_SOI 0xD8 @@ -541,6 +545,11 @@ color_space = exif_get_short (entry->data, o); switch (color_space) { +#if EOG_METADATA_READER_JPG_GEN_PROFILE_FROM_EXIF_VALUES == 0 + case 0xFFFF: + eog_debug_message (DEBUG_LCMS, "JPEG is uncalibrated. " + "Fallback to sRGB."); +#endif case 1: eog_debug_message (DEBUG_LCMS, "JPEG is sRGB"); @@ -554,6 +563,7 @@ //profile = cmsCreate_Adobe1998Profile (); break; +#if EOG_METADATA_READER_JPG_GEN_PROFILE_FROM_EXIF_VALUES != 0 case 0xFFFF: { cmsCIExyY whitepoint; @@ -625,6 +635,7 @@ break; } +#endif } exif_data_unref (exif); diff -Nru eog-3.26.2/src/eog-metadata-sidebar.c eog-3.27.90/src/eog-metadata-sidebar.c --- eog-3.26.2/src/eog-metadata-sidebar.c 2016-10-08 20:55:39.000000000 +0000 +++ eog-3.27.90/src/eog-metadata-sidebar.c 2018-02-12 20:46:58.000000000 +0000 @@ -299,16 +299,22 @@ { EogMetadataSidebarPrivate *priv = EOG_METADATA_SIDEBAR(user_data)->priv; EogImage *img; - GdkScreen *screen; + GtkWidget *toplevel; + GtkWindow *window; GFile *file; g_return_if_fail (priv->parent_window != NULL); img = eog_window_get_image (priv->parent_window); - screen = gtk_widget_get_screen (GTK_WIDGET (priv->parent_window)); file = eog_image_get_file (img); - eog_util_show_file_in_filemanager (file, screen); + toplevel = gtk_widget_get_toplevel (GTK_WIDGET (label)); + if (GTK_IS_WINDOW (toplevel)) + window = GTK_WINDOW (toplevel); + else + window = NULL; + + eog_util_show_file_in_filemanager (file, window); g_object_unref (file); } diff -Nru eog-3.26.2/src/eog-properties-dialog.c eog-3.27.90/src/eog-properties-dialog.c --- eog-3.26.2/src/eog-properties-dialog.c 2016-10-08 20:55:39.000000000 +0000 +++ eog-3.27.90/src/eog-properties-dialog.c 2018-02-12 20:46:58.000000000 +0000 @@ -439,16 +439,16 @@ pd_folder_button_clicked_cb (GtkButton *button, gpointer data) { EogPropertiesDialogPrivate *priv = EOG_PROPERTIES_DIALOG (data)->priv; - GdkScreen *screen; + GtkWindow *window; guint32 timestamp; if (!priv->folder_button_uri) return; - screen = gtk_widget_get_screen (GTK_WIDGET (button)); timestamp = gtk_get_current_event_time (); - gtk_show_uri (screen, priv->folder_button_uri, timestamp, NULL); + window = GTK_WINDOW (data); + gtk_show_uri_on_window (window, priv->folder_button_uri, timestamp, NULL); } static gboolean diff -Nru eog-3.26.2/src/eog-save-as-dialog-helper.c eog-3.27.90/src/eog-save-as-dialog-helper.c --- eog-3.26.2/src/eog-save-as-dialog-helper.c 2015-09-28 12:46:13.000000000 +0000 +++ eog-3.27.90/src/eog-save-as-dialog-helper.c 2018-02-12 20:46:58.000000000 +0000 @@ -235,7 +235,7 @@ data->n_images = g_list_length (images); data->nth_image = (int) ((float) data->n_images * rand() / (float) (RAND_MAX+1.0)); g_assert (data->nth_image >= 0 && data->nth_image < data->n_images); - data->image = g_object_ref (G_OBJECT (g_list_nth_data (images, data->nth_image))); + data->image = g_object_ref (EOG_IMAGE (g_list_nth_data (images, data->nth_image))); g_object_set_data_full (G_OBJECT (dlg), "data", data, destroy_data_cb); g_signal_connect (G_OBJECT (data->format_combobox), "changed", diff -Nru eog-3.26.2/src/eog-scroll-view.c eog-3.27.90/src/eog-scroll-view.c --- eog-3.26.2/src/eog-scroll-view.c 2017-06-04 10:58:01.000000000 +0000 +++ eog-3.27.90/src/eog-scroll-view.c 2018-02-12 20:46:58.000000000 +0000 @@ -647,11 +647,8 @@ window = gtk_widget_get_window (GTK_WIDGET (priv->display)); - /* Scroll the window area and process exposure synchronously. */ - if (!gtk_gesture_is_recognized (priv->zoom_gesture)) { gdk_window_scroll (window, -xofs, -yofs); - gdk_window_process_updates (window, TRUE); } out: @@ -2816,7 +2813,7 @@ g_return_if_fail (EOG_IS_SCROLL_VIEW (view)); g_return_if_fail (view->priv->menu == NULL); - view->priv->menu = g_object_ref (menu); + view->priv->menu = g_object_ref (GTK_WIDGET (menu)); gtk_menu_attach_to_widget (GTK_MENU (view->priv->menu), GTK_WIDGET (view), diff -Nru eog-3.26.2/src/eog-thumb-view.c eog-3.27.90/src/eog-thumb-view.c --- eog-3.26.2/src/eog-thumb-view.c 2016-08-21 15:12:17.000000000 +0000 +++ eog-3.27.90/src/eog-thumb-view.c 2018-02-12 20:46:58.000000000 +0000 @@ -50,8 +50,6 @@ static EogImage* eog_thumb_view_get_image_from_path (EogThumbView *thumbview, GtkTreePath *path); -static void eog_thumb_view_popup_menu (EogThumbView *widget, - GdkEventButton *event); static void eog_thumb_view_update_columns (EogThumbView *view); static gboolean @@ -404,6 +402,7 @@ thumbview_on_button_press_event_cb (GtkWidget *thumbview, GdkEventButton *event, gpointer user_data) { + EogThumbView *view = EOG_THUMB_VIEW (thumbview); GtkTreePath *path; /* Ignore double-clicks and triple-clicks */ @@ -421,7 +420,8 @@ gtk_icon_view_select_path (GTK_ICON_VIEW (thumbview), path); gtk_icon_view_set_cursor (GTK_ICON_VIEW (thumbview), path, NULL, FALSE); } - eog_thumb_view_popup_menu (EOG_THUMB_VIEW (thumbview), event); + gtk_menu_popup_at_pointer (GTK_MENU (view->priv->menu), + (const GdkEvent*) event); gtk_tree_path_free (path); @@ -1043,7 +1043,7 @@ g_return_if_fail (EOG_IS_THUMB_VIEW (thumbview)); g_return_if_fail (thumbview->priv->menu == NULL); - thumbview->priv->menu = g_object_ref (menu); + thumbview->priv->menu = g_object_ref (GTK_WIDGET (menu)); gtk_menu_attach_to_widget (GTK_MENU (thumbview->priv->menu), GTK_WIDGET (thumbview), @@ -1053,24 +1053,3 @@ G_CALLBACK (thumbview_on_button_press_event_cb), NULL); } - - -static void -eog_thumb_view_popup_menu (EogThumbView *thumbview, GdkEventButton *event) -{ - GtkWidget *popup; - int button, event_time; - - popup = thumbview->priv->menu; - - if (event) { - button = event->button; - event_time = event->time; - } else { - button = 0; - event_time = gtk_get_current_event_time (); - } - - gtk_menu_popup (GTK_MENU (popup), NULL, NULL, NULL, NULL, - button, event_time); -} diff -Nru eog-3.26.2/src/eog-util.c eog-3.27.90/src/eog-util.c --- eog-3.26.2/src/eog-util.c 2016-02-14 19:04:17.000000000 +0000 +++ eog-3.27.90/src/eog-util.c 2018-02-12 20:46:58.000000000 +0000 @@ -53,8 +53,8 @@ if (section) uri = g_strdup_printf ("help:eog/%s", section); - gtk_show_uri (NULL, ((uri != NULL) ? uri : "help:eog"), - gtk_get_current_event_time (), &error); + gtk_show_uri_on_window (parent, ((uri != NULL) ? uri : "help:eog"), + gtk_get_current_event_time (), &error); g_free (uri); @@ -419,7 +419,7 @@ } static void -_eog_util_show_file_in_filemanager_fallback (GFile *file, GdkScreen *screen) +_eog_util_show_file_in_filemanager_fallback (GFile *file, GtkWindow *toplevel) { gchar *uri = NULL; GError *error = NULL; @@ -438,7 +438,7 @@ g_object_unref (parent_file); } - if (uri && !gtk_show_uri (screen, uri, timestamp, &error)) { + if (uri && !gtk_show_uri_on_window (toplevel, uri, timestamp, &error)) { g_warning ("Couldn't show containing folder \"%s\": %s", uri, error->message); g_error_free (error); @@ -448,7 +448,7 @@ } void -eog_util_show_file_in_filemanager (GFile *file, GdkScreen *screen) +eog_util_show_file_in_filemanager (GFile *file, GtkWindow *toplevel) { GDBusProxy *proxy; gboolean done = FALSE; @@ -501,5 +501,5 @@ /* Fallback to gtk_show_uri() if launch over DBus is not possible */ if (!done) - _eog_util_show_file_in_filemanager_fallback (file, screen); + _eog_util_show_file_in_filemanager_fallback (file, toplevel); } diff -Nru eog-3.26.2/src/eog-util.h eog-3.27.90/src/eog-util.h --- eog-3.26.2/src/eog-util.h 2015-09-28 12:46:13.000000000 +0000 +++ eog-3.27.90/src/eog-util.h 2018-02-12 20:46:58.000000000 +0000 @@ -67,7 +67,7 @@ G_GNUC_INTERNAL void eog_util_show_file_in_filemanager (GFile *file, - GdkScreen *screen); + GtkWindow *toplevel); G_END_DECLS diff -Nru eog-3.26.2/src/eog-window.c eog-3.27.90/src/eog-window.c --- eog-3.26.2/src/eog-window.c 2017-02-12 19:04:17.000000000 +0000 +++ eog-3.27.90/src/eog-window.c 2018-02-12 20:46:58.000000000 +0000 @@ -87,6 +87,9 @@ #define EOG_WINDOW_FULLSCREEN_TIMEOUT 2 * 1000 #define EOG_WINDOW_FULLSCREEN_POPUP_THRESHOLD 5 +#define EOG_RECENT_FILES_GROUP "Graphics" +#define EOG_RECENT_FILES_APP_NAME "Image Viewer" + #define EOG_WALLPAPER_FILENAME "eog-wallpaper" #define is_rtl (gtk_widget_get_default_direction () == GTK_TEXT_DIR_RTL) @@ -811,6 +814,53 @@ } } +static gboolean +add_file_to_recent_files (GFile *file) +{ + gchar *text_uri; + GFileInfo *file_info; + GtkRecentData *recent_data; + static gchar *groups[2] = { EOG_RECENT_FILES_GROUP , NULL }; + + if (file == NULL) return FALSE; + + /* The password gets stripped here because ~/.recently-used.xbel is + * readable by everyone (chmod 644). It also makes the workaround + * for the bug with gtk_recent_info_get_uri_display() easier + * (see the comment in eog_window_update_recent_files_menu()). */ + text_uri = g_file_get_uri (file); + + if (text_uri == NULL) + return FALSE; + + file_info = g_file_query_info (file, + G_FILE_ATTRIBUTE_STANDARD_CONTENT_TYPE, + 0, NULL, NULL); + if (file_info == NULL) + return FALSE; + + recent_data = g_slice_new (GtkRecentData); + recent_data->display_name = NULL; + recent_data->description = NULL; + recent_data->mime_type = (gchar *) g_file_info_get_content_type (file_info); + recent_data->app_name = EOG_RECENT_FILES_APP_NAME; + recent_data->app_exec = g_strjoin(" ", g_get_prgname (), "%u", NULL); + recent_data->groups = groups; + recent_data->is_private = FALSE; + + gtk_recent_manager_add_full (gtk_recent_manager_get_default (), + text_uri, + recent_data); + + g_free (recent_data->app_exec); + g_free (text_uri); + g_object_unref (file_info); + + g_slice_free (GtkRecentData, recent_data); + + return FALSE; +} + static void image_thumb_changed_cb (EogImage *image, gpointer data) { @@ -915,6 +965,7 @@ eog_window_display_image (EogWindow *window, EogImage *image) { EogWindowPrivate *priv; + GFile *file; g_return_if_fail (EOG_IS_WINDOW (window)); g_return_if_fail (EOG_IS_IMAGE (image)); @@ -947,6 +998,12 @@ eog_window_update_open_with_menu (window, image); + file = eog_image_get_file (image); + g_idle_add_full (G_PRIORITY_LOW, + (GSourceFunc) add_file_to_recent_files, + file, + (GDestroyNotify) g_object_unref); + if (eog_image_is_multipaged (image)) { GtkWidget *info_bar; @@ -1179,8 +1236,8 @@ gint height, EogWindow *window) { - GdkScreen *screen; - GdkRectangle monitor; + GdkMonitor *monitor; + GdkRectangle monitor_rect; GtkAllocation allocation; gint final_width, final_height; gint screen_width, screen_height; @@ -1218,15 +1275,14 @@ eog_debug_message (DEBUG_WINDOW, "Initial Window Size: %d x %d", window_width, window_height); - screen = gtk_window_get_screen (GTK_WINDOW (window)); + monitor = gdk_display_get_monitor_at_window ( + gtk_widget_get_display (GTK_WIDGET (window)), + gtk_widget_get_window (GTK_WIDGET (window))); - gdk_screen_get_monitor_geometry (screen, - gdk_screen_get_monitor_at_window (screen, - gtk_widget_get_window (GTK_WIDGET (window))), - &monitor); + gdk_monitor_get_geometry (monitor, &monitor_rect); - screen_width = monitor.width; - screen_height = monitor.height; + screen_width = monitor_rect.width; + screen_height = monitor_rect.height; eog_debug_message (DEBUG_WINDOW, "Screen Size: %d x %d", screen_width, screen_height); @@ -2961,7 +3017,7 @@ g_return_if_fail (file != NULL); eog_util_show_file_in_filemanager (file, - gtk_widget_get_screen (GTK_WIDGET (user_data))); + GTK_WINDOW (user_data)); } static void diff -Nru eog-3.26.2/src/Makefile.am eog-3.27.90/src/Makefile.am --- eog-3.26.2/src/Makefile.am 2017-11-08 20:33:41.000000000 +0000 +++ eog-3.27.90/src/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,235 +0,0 @@ -if ENABLE_JPEG -jpeg_LIB = $(top_builddir)/jpegutils/libeog-jpegutils.la -endif - -pkglib_LTLIBRARIES = libeog.la - -bin_PROGRAMS = eog - -headerdir = $(includedir)/eog-@EOG_API_VERSION@/eog -header_DATA = $(INST_H_FILES) - -MARSHAL_OUTPUT = \ - eog-marshal.h \ - eog-marshal.c - -NOINST_H_FILES = \ - eog-application-internal.h \ - eog-close-confirmation-dialog.h \ - eog-config-keys.h \ - eog-error-message-area.h \ - eog-image-jpeg.h \ - eog-image-private.h \ - eog-metadata-sidebar.h \ - eog-metadata-reader.h \ - eog-metadata-reader-jpg.h \ - eog-metadata-reader-png.h \ - eog-pixbuf-util.h \ - eog-plugin-engine.h \ - eog-preferences-dialog.h \ - eog-print.h \ - eog-print-image-setup.h \ - eog-print-preview.h \ - eog-save-as-dialog-helper.h \ - eog-session.h \ - eog-util.h \ - eog-zoom-entry.h \ - zoom.h - -INST_H_FILES = \ - eog-application.h \ - eog-application-activatable.h \ - eog-clipboard-handler.h \ - eog-debug.h \ - eog-enums.h \ - eog-file-chooser.h \ - eog-image.h \ - eog-image-save-info.h \ - eog-job-scheduler.h \ - eog-jobs.h \ - eog-list-store.h \ - eog-properties-dialog.h \ - eog-scroll-view.h \ - eog-sidebar.h \ - eog-statusbar.h \ - eog-thumbnail.h \ - eog-thumb-nav.h \ - eog-thumb-view.h \ - eog-transform.h \ - eog-uri-converter.h \ - eog-window-activatable.h \ - eog-window.h - -libeog_c_files = \ - eog-application.c \ - eog-application-activatable.c \ - eog-clipboard-handler.c \ - eog-close-confirmation-dialog.c \ - eog-debug.c \ - eog-error-message-area.c \ - eog-file-chooser.c \ - eog-image.c \ - eog-image-jpeg.c \ - eog-image-save-info.c \ - eog-job-scheduler.c \ - eog-jobs.c \ - eog-list-store.c \ - eog-metadata-sidebar.c \ - eog-metadata-reader.c \ - eog-metadata-reader-jpg.c \ - eog-metadata-reader-png.c \ - eog-pixbuf-util.c \ - eog-plugin-engine.c \ - eog-preferences-dialog.c \ - eog-print.c \ - eog-print-image-setup.c \ - eog-print-preview.c \ - eog-properties-dialog.c \ - eog-save-as-dialog-helper.c \ - eog-scroll-view.c \ - eog-session.c \ - eog-sidebar.c \ - eog-statusbar.c \ - eog-thumbnail.c \ - eog-thumb-nav.c \ - eog-thumb-view.c \ - eog-transform.c \ - eog-uri-converter.c \ - eog-util.c \ - eog-window-activatable.c \ - eog-window.c \ - eog-zoom-entry.c \ - zoom.c - -libeog_la_SOURCES = \ - $(libeog_c_files) \ - $(BUILT_SOURCES) \ - $(NOINST_H_FILES) \ - $(INST_H_FILES) - -if HAVE_EXIF -INST_H_FILES += \ - eog-exif-util.h - -NOINST_H_FILES += \ - eog-metadata-details.h - -libeog_c_files += \ - eog-metadata-details.c \ - eog-exif-util.c -endif - -if HAVE_EXEMPI -# We need to make sure eog-metadata-details -# is only listed once -# or the build will break with automake-1.11 -if !HAVE_EXIF -NOINST_H_FILES += \ - eog-metadata-details.h - -libeog_la_SOURCES += \ - eog-metadata-details.c -endif !HAVE_EXIF -endif HAVE_EXEMPI - -libeog_la_CPPFLAGS = \ - -I$(top_srcdir)/jpegutils \ - -DG_LOG_DOMAIN=\"EOG\" \ - -DEOG_PREFIX=\""${prefix}"\" \ - -DEOG_DATA_DIR=\""$(pkgdatadir)"\" \ - -DEOG_LOCALE_DIR=\""$(datadir)/locale"\" \ - -DEOG_PLUGIN_DIR=\""$(libdir)/eog/plugins"\" \ - -DLIBDIR=\""$(libdir)"\" - -libeog_la_CFLAGS = \ - $(EOG_CFLAGS) \ - $(WARN_CFLAGS) - -libeog_la_LIBADD = \ - $(EOG_LIBS) \ - $(jpeg_LIB) \ - $(LIBJPEG) \ - $(LIBM) - -if HAVE_LCMS -libeog_la_CFLAGS += \ - $(X11_CFLAGS) - -libeog_la_LIBADD += \ - $(X11_LIBS) -endif - -libeog_la_LDFLAGS = -avoid-version -export-dynamic -no-undefined -export-symbols-regex "^eog_.*" - -eog_SOURCES = main.c - -eog_CFLAGS = \ - $(EOG_CFLAGS) \ - -DEOG_DATA_DIR=\""$(pkgdatadir)"\" \ - -DEOG_LOCALE_DIR=\""$(datadir)/locale"\" \ - $(INTROSPECTION_CFLAGS) - -eog_LDADD = \ - libeog.la \ - $(EOG_LIBS) \ - $(INTROSPECTION_LIBS) - -eog_LDFLAGS = -export-dynamic -no-undefined - -BUILT_SOURCES = \ - eog-enum-types.c \ - eog-enum-types.h \ - eog-resources.c \ - $(MARSHAL_OUTPUT) - -eog_resources_deps = $(shell $(GLIB_COMPILE_RESOURCES) --sourcedir=$(top_srcdir)/data --generate-dependencies $(top_srcdir)/src/eog.gresource.xml) - -eog-resources.c: $(top_srcdir)/src/eog.gresource.xml $(eog_resources_deps) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) "$<" --target=$@ \ - --sourcedir=$(top_srcdir)/data --c-name _eog --generate-source - -eog-enum-types.h: eog-enum-types.h.template $(INST_H_FILES) $(GLIB_MKENUMS) - $(AM_V_GEN)(cd $(srcdir) && $(GLIB_MKENUMS) --template eog-enum-types.h.template $(INST_H_FILES)) > $@ - -eog-enum-types.c: eog-enum-types.c.template $(INST_H_FILES) $(GLIB_MKENUMS) - $(AM_V_GEN)(cd $(srcdir) && $(GLIB_MKENUMS) --template eog-enum-types.c.template $(INST_H_FILES)) > $@ - -eog-marshal.h: eog-marshal.list $(GLIB_GENMARSHAL) - $(AM_V_GEN)$(GLIB_GENMARSHAL) $< --header --internal --prefix=eog_marshal > $@ - -eog-marshal.c: eog-marshal.list $(GLIB_GENMARSHAL) - $(AM_V_GEN)$(GLIB_GENMARSHAL) $< --body --header --prefix=eog_marshal > $@ - -EXTRA_DIST = \ - eog.gresource.xml \ - eog-enum-types.h.template \ - eog-enum-types.c.template \ - eog-marshal.list - -CLEANFILES = $(BUILT_SOURCES) - -if HAVE_INTROSPECTION --include $(INTROSPECTION_MAKEFILE) -INTROSPECTION_GIRS = Eog-3.0.gir -INTROSPECTION_SCANNER_ARGS = -I$(top_srcdir) --warn-all $(libeog_la_CPPFLAGS) - -Eog-3.0.gir: eog -Eog_3_0_gir_INCLUDES = Gtk-3.0 -Eog_3_0_gir_FILES = $(INST_H_FILES) $(libeog_c_files) $(BUILT_SOURCES) -Eog_3_0_gir_VERSION = 3.0 -Eog_3_0_gir_PROGRAM = $(builddir)/eog -Eog_3_0_gir_NAMESPACE = Eog -Eog_3_0_gir_CFLAGS = $(EOG_CFLAGS) -girdir = $(datadir)/eog/gir-1.0 -gir_DATA = $(INTROSPECTION_GIRS) - -typelibdir = $(libdir)/eog/girepository-1.0 -typelib_DATA = $(INTROSPECTION_GIRS:.gir=.typelib) - -CLEANFILES += $(gir_DATA) $(typelib_DATA) -endif - -dist-hook: - cd $(distdir); rm -f $(BUILT_SOURCES) - --include $(top_srcdir)/git.mk diff -Nru eog-3.26.2/src/Makefile.in eog-3.27.90/src/Makefile.in --- eog-3.26.2/src/Makefile.in 2017-11-08 20:34:25.000000000 +0000 +++ eog-3.27.90/src/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,1449 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -bin_PROGRAMS = eog$(EXEEXT) -@HAVE_EXIF_TRUE@am__append_1 = \ -@HAVE_EXIF_TRUE@ eog-exif-util.h - -@HAVE_EXIF_TRUE@am__append_2 = \ -@HAVE_EXIF_TRUE@ eog-metadata-details.h - -@HAVE_EXIF_TRUE@am__append_3 = \ -@HAVE_EXIF_TRUE@ eog-metadata-details.c \ -@HAVE_EXIF_TRUE@ eog-exif-util.c - - -# We need to make sure eog-metadata-details -# is only listed once -# or the build will break with automake-1.11 -@HAVE_EXEMPI_TRUE@@HAVE_EXIF_FALSE@am__append_4 = \ -@HAVE_EXEMPI_TRUE@@HAVE_EXIF_FALSE@ eog-metadata-details.h - -@HAVE_EXEMPI_TRUE@@HAVE_EXIF_FALSE@am__append_5 = \ -@HAVE_EXEMPI_TRUE@@HAVE_EXIF_FALSE@ eog-metadata-details.c - -@HAVE_LCMS_TRUE@am__append_6 = \ -@HAVE_LCMS_TRUE@ $(X11_CFLAGS) - -@HAVE_LCMS_TRUE@am__append_7 = \ -@HAVE_LCMS_TRUE@ $(X11_LIBS) - -@HAVE_INTROSPECTION_TRUE@am__append_8 = $(gir_DATA) $(typelib_DATA) -subdir = src -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/behave-installed-tests.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__installdirs = "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(bindir)" \ - "$(DESTDIR)$(girdir)" "$(DESTDIR)$(headerdir)" \ - "$(DESTDIR)$(typelibdir)" -LTLIBRARIES = $(pkglib_LTLIBRARIES) -am__DEPENDENCIES_1 = -@HAVE_LCMS_TRUE@am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) -libeog_la_DEPENDENCIES = $(am__DEPENDENCIES_1) $(jpeg_LIB) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_2) -am__libeog_la_SOURCES_DIST = eog-application.c \ - eog-application-activatable.c eog-clipboard-handler.c \ - eog-close-confirmation-dialog.c eog-debug.c \ - eog-error-message-area.c eog-file-chooser.c eog-image.c \ - eog-image-jpeg.c eog-image-save-info.c eog-job-scheduler.c \ - eog-jobs.c eog-list-store.c eog-metadata-sidebar.c \ - eog-metadata-reader.c eog-metadata-reader-jpg.c \ - eog-metadata-reader-png.c eog-pixbuf-util.c \ - eog-plugin-engine.c eog-preferences-dialog.c eog-print.c \ - eog-print-image-setup.c eog-print-preview.c \ - eog-properties-dialog.c eog-save-as-dialog-helper.c \ - eog-scroll-view.c eog-session.c eog-sidebar.c eog-statusbar.c \ - eog-thumbnail.c eog-thumb-nav.c eog-thumb-view.c \ - eog-transform.c eog-uri-converter.c eog-util.c \ - eog-window-activatable.c eog-window.c eog-zoom-entry.c zoom.c \ - eog-metadata-details.c eog-exif-util.c eog-enum-types.c \ - eog-enum-types.h eog-resources.c eog-marshal.h eog-marshal.c \ - eog-application-internal.h eog-close-confirmation-dialog.h \ - eog-config-keys.h eog-error-message-area.h eog-image-jpeg.h \ - eog-image-private.h eog-metadata-sidebar.h \ - eog-metadata-reader.h eog-metadata-reader-jpg.h \ - eog-metadata-reader-png.h eog-pixbuf-util.h \ - eog-plugin-engine.h eog-preferences-dialog.h eog-print.h \ - eog-print-image-setup.h eog-print-preview.h \ - eog-save-as-dialog-helper.h eog-session.h eog-util.h \ - eog-zoom-entry.h zoom.h eog-metadata-details.h \ - eog-application.h eog-application-activatable.h \ - eog-clipboard-handler.h eog-debug.h eog-enums.h \ - eog-file-chooser.h eog-image.h eog-image-save-info.h \ - eog-job-scheduler.h eog-jobs.h eog-list-store.h \ - eog-properties-dialog.h eog-scroll-view.h eog-sidebar.h \ - eog-statusbar.h eog-thumbnail.h eog-thumb-nav.h \ - eog-thumb-view.h eog-transform.h eog-uri-converter.h \ - eog-window-activatable.h eog-window.h eog-exif-util.h -@HAVE_EXIF_TRUE@am__objects_1 = libeog_la-eog-metadata-details.lo \ -@HAVE_EXIF_TRUE@ libeog_la-eog-exif-util.lo -am__objects_2 = libeog_la-eog-application.lo \ - libeog_la-eog-application-activatable.lo \ - libeog_la-eog-clipboard-handler.lo \ - libeog_la-eog-close-confirmation-dialog.lo \ - libeog_la-eog-debug.lo libeog_la-eog-error-message-area.lo \ - libeog_la-eog-file-chooser.lo libeog_la-eog-image.lo \ - libeog_la-eog-image-jpeg.lo libeog_la-eog-image-save-info.lo \ - libeog_la-eog-job-scheduler.lo libeog_la-eog-jobs.lo \ - libeog_la-eog-list-store.lo libeog_la-eog-metadata-sidebar.lo \ - libeog_la-eog-metadata-reader.lo \ - libeog_la-eog-metadata-reader-jpg.lo \ - libeog_la-eog-metadata-reader-png.lo \ - libeog_la-eog-pixbuf-util.lo libeog_la-eog-plugin-engine.lo \ - libeog_la-eog-preferences-dialog.lo libeog_la-eog-print.lo \ - libeog_la-eog-print-image-setup.lo \ - libeog_la-eog-print-preview.lo \ - libeog_la-eog-properties-dialog.lo \ - libeog_la-eog-save-as-dialog-helper.lo \ - libeog_la-eog-scroll-view.lo libeog_la-eog-session.lo \ - libeog_la-eog-sidebar.lo libeog_la-eog-statusbar.lo \ - libeog_la-eog-thumbnail.lo libeog_la-eog-thumb-nav.lo \ - libeog_la-eog-thumb-view.lo libeog_la-eog-transform.lo \ - libeog_la-eog-uri-converter.lo libeog_la-eog-util.lo \ - libeog_la-eog-window-activatable.lo libeog_la-eog-window.lo \ - libeog_la-eog-zoom-entry.lo libeog_la-zoom.lo $(am__objects_1) -am__objects_3 = libeog_la-eog-marshal.lo -am__objects_4 = libeog_la-eog-enum-types.lo libeog_la-eog-resources.lo \ - $(am__objects_3) -am__objects_5 = -am__objects_6 = $(am__objects_5) $(am__objects_5) -am__objects_7 = $(am__objects_5) -@HAVE_EXEMPI_TRUE@@HAVE_EXIF_FALSE@am__objects_8 = libeog_la-eog-metadata-details.lo -am_libeog_la_OBJECTS = $(am__objects_2) $(am__objects_4) \ - $(am__objects_6) $(am__objects_7) $(am__objects_8) -libeog_la_OBJECTS = $(am_libeog_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -libeog_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(libeog_la_CFLAGS) \ - $(CFLAGS) $(libeog_la_LDFLAGS) $(LDFLAGS) -o $@ -PROGRAMS = $(bin_PROGRAMS) -am_eog_OBJECTS = eog-main.$(OBJEXT) -eog_OBJECTS = $(am_eog_OBJECTS) -eog_DEPENDENCIES = libeog.la $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) -eog_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(eog_CFLAGS) $(CFLAGS) \ - $(eog_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libeog_la_SOURCES) $(eog_SOURCES) -DIST_SOURCES = $(am__libeog_la_SOURCES_DIST) $(eog_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -DATA = $(gir_DATA) $(header_DATA) $(typelib_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BEHAVE_INSTALLED_TESTS_ENABLED = @BEHAVE_INSTALLED_TESTS_ENABLED@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EOG_API_VERSION = @EOG_API_VERSION@ -EOG_CFLAGS = @EOG_CFLAGS@ -EOG_DOC_EXIF_START = @EOG_DOC_EXIF_START@ -EOG_DOC_EXIF_STOP = @EOG_DOC_EXIF_STOP@ -EOG_LIBS = @EOG_LIBS@ -EOG_MAJOR_VERSION = @EOG_MAJOR_VERSION@ -EOG_MICRO_VERSION = @EOG_MICRO_VERSION@ -EOG_MINOR_VERSION = @EOG_MINOR_VERSION@ -EXEEXT = @EXEEXT@ -EXEMPI_CFLAGS = @EXEMPI_CFLAGS@ -EXEMPI_LIBS = @EXEMPI_LIBS@ -EXIF_CFLAGS = @EXIF_CFLAGS@ -EXIF_LIBS = @EXIF_LIBS@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ -GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ -GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -HELP_DIR = @HELP_DIR@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -ITSTOOL = @ITSTOOL@ -LCMS_CFLAGS = @LCMS_CFLAGS@ -LCMS_LIBS = @LCMS_LIBS@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBJPEG = @LIBJPEG@ -LIBM = @LIBM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -RSVG_CFLAGS = @RSVG_CFLAGS@ -RSVG_LIBS = @RSVG_LIBS@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -@ENABLE_JPEG_TRUE@jpeg_LIB = $(top_builddir)/jpegutils/libeog-jpegutils.la -pkglib_LTLIBRARIES = libeog.la -headerdir = $(includedir)/eog-@EOG_API_VERSION@/eog -header_DATA = $(INST_H_FILES) -MARSHAL_OUTPUT = \ - eog-marshal.h \ - eog-marshal.c - -NOINST_H_FILES = eog-application-internal.h \ - eog-close-confirmation-dialog.h eog-config-keys.h \ - eog-error-message-area.h eog-image-jpeg.h eog-image-private.h \ - eog-metadata-sidebar.h eog-metadata-reader.h \ - eog-metadata-reader-jpg.h eog-metadata-reader-png.h \ - eog-pixbuf-util.h eog-plugin-engine.h eog-preferences-dialog.h \ - eog-print.h eog-print-image-setup.h eog-print-preview.h \ - eog-save-as-dialog-helper.h eog-session.h eog-util.h \ - eog-zoom-entry.h zoom.h $(am__append_2) $(am__append_4) -INST_H_FILES = eog-application.h eog-application-activatable.h \ - eog-clipboard-handler.h eog-debug.h eog-enums.h \ - eog-file-chooser.h eog-image.h eog-image-save-info.h \ - eog-job-scheduler.h eog-jobs.h eog-list-store.h \ - eog-properties-dialog.h eog-scroll-view.h eog-sidebar.h \ - eog-statusbar.h eog-thumbnail.h eog-thumb-nav.h \ - eog-thumb-view.h eog-transform.h eog-uri-converter.h \ - eog-window-activatable.h eog-window.h $(am__append_1) -libeog_c_files = eog-application.c eog-application-activatable.c \ - eog-clipboard-handler.c eog-close-confirmation-dialog.c \ - eog-debug.c eog-error-message-area.c eog-file-chooser.c \ - eog-image.c eog-image-jpeg.c eog-image-save-info.c \ - eog-job-scheduler.c eog-jobs.c eog-list-store.c \ - eog-metadata-sidebar.c eog-metadata-reader.c \ - eog-metadata-reader-jpg.c eog-metadata-reader-png.c \ - eog-pixbuf-util.c eog-plugin-engine.c eog-preferences-dialog.c \ - eog-print.c eog-print-image-setup.c eog-print-preview.c \ - eog-properties-dialog.c eog-save-as-dialog-helper.c \ - eog-scroll-view.c eog-session.c eog-sidebar.c eog-statusbar.c \ - eog-thumbnail.c eog-thumb-nav.c eog-thumb-view.c \ - eog-transform.c eog-uri-converter.c eog-util.c \ - eog-window-activatable.c eog-window.c eog-zoom-entry.c zoom.c \ - $(am__append_3) -libeog_la_SOURCES = $(libeog_c_files) $(BUILT_SOURCES) \ - $(NOINST_H_FILES) $(INST_H_FILES) $(am__append_5) -libeog_la_CPPFLAGS = \ - -I$(top_srcdir)/jpegutils \ - -DG_LOG_DOMAIN=\"EOG\" \ - -DEOG_PREFIX=\""${prefix}"\" \ - -DEOG_DATA_DIR=\""$(pkgdatadir)"\" \ - -DEOG_LOCALE_DIR=\""$(datadir)/locale"\" \ - -DEOG_PLUGIN_DIR=\""$(libdir)/eog/plugins"\" \ - -DLIBDIR=\""$(libdir)"\" - -libeog_la_CFLAGS = $(EOG_CFLAGS) $(WARN_CFLAGS) $(am__append_6) -libeog_la_LIBADD = $(EOG_LIBS) $(jpeg_LIB) $(LIBJPEG) $(LIBM) \ - $(am__append_7) -libeog_la_LDFLAGS = -avoid-version -export-dynamic -no-undefined -export-symbols-regex "^eog_.*" -eog_SOURCES = main.c -eog_CFLAGS = \ - $(EOG_CFLAGS) \ - -DEOG_DATA_DIR=\""$(pkgdatadir)"\" \ - -DEOG_LOCALE_DIR=\""$(datadir)/locale"\" \ - $(INTROSPECTION_CFLAGS) - -eog_LDADD = \ - libeog.la \ - $(EOG_LIBS) \ - $(INTROSPECTION_LIBS) - -eog_LDFLAGS = -export-dynamic -no-undefined -BUILT_SOURCES = \ - eog-enum-types.c \ - eog-enum-types.h \ - eog-resources.c \ - $(MARSHAL_OUTPUT) - -eog_resources_deps = $(shell $(GLIB_COMPILE_RESOURCES) --sourcedir=$(top_srcdir)/data --generate-dependencies $(top_srcdir)/src/eog.gresource.xml) -EXTRA_DIST = \ - eog.gresource.xml \ - eog-enum-types.h.template \ - eog-enum-types.c.template \ - eog-marshal.list - -CLEANFILES = $(BUILT_SOURCES) $(am__append_8) -@HAVE_INTROSPECTION_TRUE@INTROSPECTION_GIRS = Eog-3.0.gir -@HAVE_INTROSPECTION_TRUE@INTROSPECTION_SCANNER_ARGS = -I$(top_srcdir) --warn-all $(libeog_la_CPPFLAGS) -@HAVE_INTROSPECTION_TRUE@Eog_3_0_gir_INCLUDES = Gtk-3.0 -@HAVE_INTROSPECTION_TRUE@Eog_3_0_gir_FILES = $(INST_H_FILES) $(libeog_c_files) $(BUILT_SOURCES) -@HAVE_INTROSPECTION_TRUE@Eog_3_0_gir_VERSION = 3.0 -@HAVE_INTROSPECTION_TRUE@Eog_3_0_gir_PROGRAM = $(builddir)/eog -@HAVE_INTROSPECTION_TRUE@Eog_3_0_gir_NAMESPACE = Eog -@HAVE_INTROSPECTION_TRUE@Eog_3_0_gir_CFLAGS = $(EOG_CFLAGS) -@HAVE_INTROSPECTION_TRUE@girdir = $(datadir)/eog/gir-1.0 -@HAVE_INTROSPECTION_TRUE@gir_DATA = $(INTROSPECTION_GIRS) -@HAVE_INTROSPECTION_TRUE@typelibdir = $(libdir)/eog/girepository-1.0 -@HAVE_INTROSPECTION_TRUE@typelib_DATA = $(INTROSPECTION_GIRS:.gir=.typelib) -all: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) - @$(NORMAL_INSTALL) - @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ - list2=; for p in $$list; do \ - if test -f $$p; then \ - list2="$$list2 $$p"; \ - else :; fi; \ - done; \ - test -z "$$list2" || { \ - echo " $(MKDIR_P) '$(DESTDIR)$(pkglibdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" || exit 1; \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ - } - -uninstall-pkglibLTLIBRARIES: - @$(NORMAL_UNINSTALL) - @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ - for p in $$list; do \ - $(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ - done - -clean-pkglibLTLIBRARIES: - -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) - @list='$(pkglib_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - -libeog.la: $(libeog_la_OBJECTS) $(libeog_la_DEPENDENCIES) $(EXTRA_libeog_la_DEPENDENCIES) - $(AM_V_CCLD)$(libeog_la_LINK) -rpath $(pkglibdir) $(libeog_la_OBJECTS) $(libeog_la_LIBADD) $(LIBS) -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p \ - || test -f $$p1 \ - ; then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' \ - -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' \ - `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list - -eog$(EXEEXT): $(eog_OBJECTS) $(eog_DEPENDENCIES) $(EXTRA_eog_DEPENDENCIES) - @rm -f eog$(EXEEXT) - $(AM_V_CCLD)$(eog_LINK) $(eog_OBJECTS) $(eog_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eog-main.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-application-activatable.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-application.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-clipboard-handler.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-close-confirmation-dialog.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-debug.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-enum-types.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-error-message-area.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-exif-util.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-file-chooser.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-image-jpeg.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-image-save-info.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-image.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-job-scheduler.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-jobs.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-list-store.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-marshal.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-metadata-details.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-metadata-reader-jpg.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-metadata-reader-png.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-metadata-reader.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-metadata-sidebar.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-pixbuf-util.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-plugin-engine.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-preferences-dialog.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-print-image-setup.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-print-preview.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-print.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-properties-dialog.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-resources.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-save-as-dialog-helper.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-scroll-view.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-session.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-sidebar.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-statusbar.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-thumb-nav.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-thumb-view.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-thumbnail.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-transform.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-uri-converter.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-util.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-window-activatable.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-window.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-eog-zoom-entry.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libeog_la-zoom.Plo@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -libeog_la-eog-application.lo: eog-application.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-application.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-application.Tpo -c -o libeog_la-eog-application.lo `test -f 'eog-application.c' || echo '$(srcdir)/'`eog-application.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-application.Tpo $(DEPDIR)/libeog_la-eog-application.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-application.c' object='libeog_la-eog-application.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-application.lo `test -f 'eog-application.c' || echo '$(srcdir)/'`eog-application.c - -libeog_la-eog-application-activatable.lo: eog-application-activatable.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-application-activatable.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-application-activatable.Tpo -c -o libeog_la-eog-application-activatable.lo `test -f 'eog-application-activatable.c' || echo '$(srcdir)/'`eog-application-activatable.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-application-activatable.Tpo $(DEPDIR)/libeog_la-eog-application-activatable.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-application-activatable.c' object='libeog_la-eog-application-activatable.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-application-activatable.lo `test -f 'eog-application-activatable.c' || echo '$(srcdir)/'`eog-application-activatable.c - -libeog_la-eog-clipboard-handler.lo: eog-clipboard-handler.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-clipboard-handler.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-clipboard-handler.Tpo -c -o libeog_la-eog-clipboard-handler.lo `test -f 'eog-clipboard-handler.c' || echo '$(srcdir)/'`eog-clipboard-handler.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-clipboard-handler.Tpo $(DEPDIR)/libeog_la-eog-clipboard-handler.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-clipboard-handler.c' object='libeog_la-eog-clipboard-handler.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-clipboard-handler.lo `test -f 'eog-clipboard-handler.c' || echo '$(srcdir)/'`eog-clipboard-handler.c - -libeog_la-eog-close-confirmation-dialog.lo: eog-close-confirmation-dialog.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-close-confirmation-dialog.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-close-confirmation-dialog.Tpo -c -o libeog_la-eog-close-confirmation-dialog.lo `test -f 'eog-close-confirmation-dialog.c' || echo '$(srcdir)/'`eog-close-confirmation-dialog.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-close-confirmation-dialog.Tpo $(DEPDIR)/libeog_la-eog-close-confirmation-dialog.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-close-confirmation-dialog.c' object='libeog_la-eog-close-confirmation-dialog.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-close-confirmation-dialog.lo `test -f 'eog-close-confirmation-dialog.c' || echo '$(srcdir)/'`eog-close-confirmation-dialog.c - -libeog_la-eog-debug.lo: eog-debug.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-debug.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-debug.Tpo -c -o libeog_la-eog-debug.lo `test -f 'eog-debug.c' || echo '$(srcdir)/'`eog-debug.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-debug.Tpo $(DEPDIR)/libeog_la-eog-debug.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-debug.c' object='libeog_la-eog-debug.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-debug.lo `test -f 'eog-debug.c' || echo '$(srcdir)/'`eog-debug.c - -libeog_la-eog-error-message-area.lo: eog-error-message-area.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-error-message-area.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-error-message-area.Tpo -c -o libeog_la-eog-error-message-area.lo `test -f 'eog-error-message-area.c' || echo '$(srcdir)/'`eog-error-message-area.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-error-message-area.Tpo $(DEPDIR)/libeog_la-eog-error-message-area.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-error-message-area.c' object='libeog_la-eog-error-message-area.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-error-message-area.lo `test -f 'eog-error-message-area.c' || echo '$(srcdir)/'`eog-error-message-area.c - -libeog_la-eog-file-chooser.lo: eog-file-chooser.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-file-chooser.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-file-chooser.Tpo -c -o libeog_la-eog-file-chooser.lo `test -f 'eog-file-chooser.c' || echo '$(srcdir)/'`eog-file-chooser.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-file-chooser.Tpo $(DEPDIR)/libeog_la-eog-file-chooser.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-file-chooser.c' object='libeog_la-eog-file-chooser.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-file-chooser.lo `test -f 'eog-file-chooser.c' || echo '$(srcdir)/'`eog-file-chooser.c - -libeog_la-eog-image.lo: eog-image.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-image.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-image.Tpo -c -o libeog_la-eog-image.lo `test -f 'eog-image.c' || echo '$(srcdir)/'`eog-image.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-image.Tpo $(DEPDIR)/libeog_la-eog-image.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-image.c' object='libeog_la-eog-image.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-image.lo `test -f 'eog-image.c' || echo '$(srcdir)/'`eog-image.c - -libeog_la-eog-image-jpeg.lo: eog-image-jpeg.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-image-jpeg.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-image-jpeg.Tpo -c -o libeog_la-eog-image-jpeg.lo `test -f 'eog-image-jpeg.c' || echo '$(srcdir)/'`eog-image-jpeg.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-image-jpeg.Tpo $(DEPDIR)/libeog_la-eog-image-jpeg.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-image-jpeg.c' object='libeog_la-eog-image-jpeg.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-image-jpeg.lo `test -f 'eog-image-jpeg.c' || echo '$(srcdir)/'`eog-image-jpeg.c - -libeog_la-eog-image-save-info.lo: eog-image-save-info.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-image-save-info.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-image-save-info.Tpo -c -o libeog_la-eog-image-save-info.lo `test -f 'eog-image-save-info.c' || echo '$(srcdir)/'`eog-image-save-info.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-image-save-info.Tpo $(DEPDIR)/libeog_la-eog-image-save-info.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-image-save-info.c' object='libeog_la-eog-image-save-info.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-image-save-info.lo `test -f 'eog-image-save-info.c' || echo '$(srcdir)/'`eog-image-save-info.c - -libeog_la-eog-job-scheduler.lo: eog-job-scheduler.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-job-scheduler.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-job-scheduler.Tpo -c -o libeog_la-eog-job-scheduler.lo `test -f 'eog-job-scheduler.c' || echo '$(srcdir)/'`eog-job-scheduler.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-job-scheduler.Tpo $(DEPDIR)/libeog_la-eog-job-scheduler.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-job-scheduler.c' object='libeog_la-eog-job-scheduler.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-job-scheduler.lo `test -f 'eog-job-scheduler.c' || echo '$(srcdir)/'`eog-job-scheduler.c - -libeog_la-eog-jobs.lo: eog-jobs.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-jobs.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-jobs.Tpo -c -o libeog_la-eog-jobs.lo `test -f 'eog-jobs.c' || echo '$(srcdir)/'`eog-jobs.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-jobs.Tpo $(DEPDIR)/libeog_la-eog-jobs.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-jobs.c' object='libeog_la-eog-jobs.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-jobs.lo `test -f 'eog-jobs.c' || echo '$(srcdir)/'`eog-jobs.c - -libeog_la-eog-list-store.lo: eog-list-store.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-list-store.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-list-store.Tpo -c -o libeog_la-eog-list-store.lo `test -f 'eog-list-store.c' || echo '$(srcdir)/'`eog-list-store.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-list-store.Tpo $(DEPDIR)/libeog_la-eog-list-store.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-list-store.c' object='libeog_la-eog-list-store.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-list-store.lo `test -f 'eog-list-store.c' || echo '$(srcdir)/'`eog-list-store.c - -libeog_la-eog-metadata-sidebar.lo: eog-metadata-sidebar.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-metadata-sidebar.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-metadata-sidebar.Tpo -c -o libeog_la-eog-metadata-sidebar.lo `test -f 'eog-metadata-sidebar.c' || echo '$(srcdir)/'`eog-metadata-sidebar.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-metadata-sidebar.Tpo $(DEPDIR)/libeog_la-eog-metadata-sidebar.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-metadata-sidebar.c' object='libeog_la-eog-metadata-sidebar.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-metadata-sidebar.lo `test -f 'eog-metadata-sidebar.c' || echo '$(srcdir)/'`eog-metadata-sidebar.c - -libeog_la-eog-metadata-reader.lo: eog-metadata-reader.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-metadata-reader.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-metadata-reader.Tpo -c -o libeog_la-eog-metadata-reader.lo `test -f 'eog-metadata-reader.c' || echo '$(srcdir)/'`eog-metadata-reader.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-metadata-reader.Tpo $(DEPDIR)/libeog_la-eog-metadata-reader.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-metadata-reader.c' object='libeog_la-eog-metadata-reader.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-metadata-reader.lo `test -f 'eog-metadata-reader.c' || echo '$(srcdir)/'`eog-metadata-reader.c - -libeog_la-eog-metadata-reader-jpg.lo: eog-metadata-reader-jpg.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-metadata-reader-jpg.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-metadata-reader-jpg.Tpo -c -o libeog_la-eog-metadata-reader-jpg.lo `test -f 'eog-metadata-reader-jpg.c' || echo '$(srcdir)/'`eog-metadata-reader-jpg.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-metadata-reader-jpg.Tpo $(DEPDIR)/libeog_la-eog-metadata-reader-jpg.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-metadata-reader-jpg.c' object='libeog_la-eog-metadata-reader-jpg.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-metadata-reader-jpg.lo `test -f 'eog-metadata-reader-jpg.c' || echo '$(srcdir)/'`eog-metadata-reader-jpg.c - -libeog_la-eog-metadata-reader-png.lo: eog-metadata-reader-png.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-metadata-reader-png.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-metadata-reader-png.Tpo -c -o libeog_la-eog-metadata-reader-png.lo `test -f 'eog-metadata-reader-png.c' || echo '$(srcdir)/'`eog-metadata-reader-png.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-metadata-reader-png.Tpo $(DEPDIR)/libeog_la-eog-metadata-reader-png.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-metadata-reader-png.c' object='libeog_la-eog-metadata-reader-png.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-metadata-reader-png.lo `test -f 'eog-metadata-reader-png.c' || echo '$(srcdir)/'`eog-metadata-reader-png.c - -libeog_la-eog-pixbuf-util.lo: eog-pixbuf-util.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-pixbuf-util.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-pixbuf-util.Tpo -c -o libeog_la-eog-pixbuf-util.lo `test -f 'eog-pixbuf-util.c' || echo '$(srcdir)/'`eog-pixbuf-util.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-pixbuf-util.Tpo $(DEPDIR)/libeog_la-eog-pixbuf-util.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-pixbuf-util.c' object='libeog_la-eog-pixbuf-util.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-pixbuf-util.lo `test -f 'eog-pixbuf-util.c' || echo '$(srcdir)/'`eog-pixbuf-util.c - -libeog_la-eog-plugin-engine.lo: eog-plugin-engine.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-plugin-engine.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-plugin-engine.Tpo -c -o libeog_la-eog-plugin-engine.lo `test -f 'eog-plugin-engine.c' || echo '$(srcdir)/'`eog-plugin-engine.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-plugin-engine.Tpo $(DEPDIR)/libeog_la-eog-plugin-engine.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-plugin-engine.c' object='libeog_la-eog-plugin-engine.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-plugin-engine.lo `test -f 'eog-plugin-engine.c' || echo '$(srcdir)/'`eog-plugin-engine.c - -libeog_la-eog-preferences-dialog.lo: eog-preferences-dialog.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-preferences-dialog.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-preferences-dialog.Tpo -c -o libeog_la-eog-preferences-dialog.lo `test -f 'eog-preferences-dialog.c' || echo '$(srcdir)/'`eog-preferences-dialog.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-preferences-dialog.Tpo $(DEPDIR)/libeog_la-eog-preferences-dialog.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-preferences-dialog.c' object='libeog_la-eog-preferences-dialog.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-preferences-dialog.lo `test -f 'eog-preferences-dialog.c' || echo '$(srcdir)/'`eog-preferences-dialog.c - -libeog_la-eog-print.lo: eog-print.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-print.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-print.Tpo -c -o libeog_la-eog-print.lo `test -f 'eog-print.c' || echo '$(srcdir)/'`eog-print.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-print.Tpo $(DEPDIR)/libeog_la-eog-print.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-print.c' object='libeog_la-eog-print.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-print.lo `test -f 'eog-print.c' || echo '$(srcdir)/'`eog-print.c - -libeog_la-eog-print-image-setup.lo: eog-print-image-setup.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-print-image-setup.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-print-image-setup.Tpo -c -o libeog_la-eog-print-image-setup.lo `test -f 'eog-print-image-setup.c' || echo '$(srcdir)/'`eog-print-image-setup.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-print-image-setup.Tpo $(DEPDIR)/libeog_la-eog-print-image-setup.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-print-image-setup.c' object='libeog_la-eog-print-image-setup.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-print-image-setup.lo `test -f 'eog-print-image-setup.c' || echo '$(srcdir)/'`eog-print-image-setup.c - -libeog_la-eog-print-preview.lo: eog-print-preview.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-print-preview.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-print-preview.Tpo -c -o libeog_la-eog-print-preview.lo `test -f 'eog-print-preview.c' || echo '$(srcdir)/'`eog-print-preview.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-print-preview.Tpo $(DEPDIR)/libeog_la-eog-print-preview.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-print-preview.c' object='libeog_la-eog-print-preview.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-print-preview.lo `test -f 'eog-print-preview.c' || echo '$(srcdir)/'`eog-print-preview.c - -libeog_la-eog-properties-dialog.lo: eog-properties-dialog.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-properties-dialog.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-properties-dialog.Tpo -c -o libeog_la-eog-properties-dialog.lo `test -f 'eog-properties-dialog.c' || echo '$(srcdir)/'`eog-properties-dialog.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-properties-dialog.Tpo $(DEPDIR)/libeog_la-eog-properties-dialog.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-properties-dialog.c' object='libeog_la-eog-properties-dialog.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-properties-dialog.lo `test -f 'eog-properties-dialog.c' || echo '$(srcdir)/'`eog-properties-dialog.c - -libeog_la-eog-save-as-dialog-helper.lo: eog-save-as-dialog-helper.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-save-as-dialog-helper.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-save-as-dialog-helper.Tpo -c -o libeog_la-eog-save-as-dialog-helper.lo `test -f 'eog-save-as-dialog-helper.c' || echo '$(srcdir)/'`eog-save-as-dialog-helper.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-save-as-dialog-helper.Tpo $(DEPDIR)/libeog_la-eog-save-as-dialog-helper.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-save-as-dialog-helper.c' object='libeog_la-eog-save-as-dialog-helper.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-save-as-dialog-helper.lo `test -f 'eog-save-as-dialog-helper.c' || echo '$(srcdir)/'`eog-save-as-dialog-helper.c - -libeog_la-eog-scroll-view.lo: eog-scroll-view.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-scroll-view.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-scroll-view.Tpo -c -o libeog_la-eog-scroll-view.lo `test -f 'eog-scroll-view.c' || echo '$(srcdir)/'`eog-scroll-view.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-scroll-view.Tpo $(DEPDIR)/libeog_la-eog-scroll-view.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-scroll-view.c' object='libeog_la-eog-scroll-view.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-scroll-view.lo `test -f 'eog-scroll-view.c' || echo '$(srcdir)/'`eog-scroll-view.c - -libeog_la-eog-session.lo: eog-session.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-session.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-session.Tpo -c -o libeog_la-eog-session.lo `test -f 'eog-session.c' || echo '$(srcdir)/'`eog-session.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-session.Tpo $(DEPDIR)/libeog_la-eog-session.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-session.c' object='libeog_la-eog-session.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-session.lo `test -f 'eog-session.c' || echo '$(srcdir)/'`eog-session.c - -libeog_la-eog-sidebar.lo: eog-sidebar.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-sidebar.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-sidebar.Tpo -c -o libeog_la-eog-sidebar.lo `test -f 'eog-sidebar.c' || echo '$(srcdir)/'`eog-sidebar.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-sidebar.Tpo $(DEPDIR)/libeog_la-eog-sidebar.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-sidebar.c' object='libeog_la-eog-sidebar.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-sidebar.lo `test -f 'eog-sidebar.c' || echo '$(srcdir)/'`eog-sidebar.c - -libeog_la-eog-statusbar.lo: eog-statusbar.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-statusbar.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-statusbar.Tpo -c -o libeog_la-eog-statusbar.lo `test -f 'eog-statusbar.c' || echo '$(srcdir)/'`eog-statusbar.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-statusbar.Tpo $(DEPDIR)/libeog_la-eog-statusbar.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-statusbar.c' object='libeog_la-eog-statusbar.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-statusbar.lo `test -f 'eog-statusbar.c' || echo '$(srcdir)/'`eog-statusbar.c - -libeog_la-eog-thumbnail.lo: eog-thumbnail.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-thumbnail.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-thumbnail.Tpo -c -o libeog_la-eog-thumbnail.lo `test -f 'eog-thumbnail.c' || echo '$(srcdir)/'`eog-thumbnail.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-thumbnail.Tpo $(DEPDIR)/libeog_la-eog-thumbnail.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-thumbnail.c' object='libeog_la-eog-thumbnail.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-thumbnail.lo `test -f 'eog-thumbnail.c' || echo '$(srcdir)/'`eog-thumbnail.c - -libeog_la-eog-thumb-nav.lo: eog-thumb-nav.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-thumb-nav.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-thumb-nav.Tpo -c -o libeog_la-eog-thumb-nav.lo `test -f 'eog-thumb-nav.c' || echo '$(srcdir)/'`eog-thumb-nav.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-thumb-nav.Tpo $(DEPDIR)/libeog_la-eog-thumb-nav.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-thumb-nav.c' object='libeog_la-eog-thumb-nav.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-thumb-nav.lo `test -f 'eog-thumb-nav.c' || echo '$(srcdir)/'`eog-thumb-nav.c - -libeog_la-eog-thumb-view.lo: eog-thumb-view.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-thumb-view.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-thumb-view.Tpo -c -o libeog_la-eog-thumb-view.lo `test -f 'eog-thumb-view.c' || echo '$(srcdir)/'`eog-thumb-view.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-thumb-view.Tpo $(DEPDIR)/libeog_la-eog-thumb-view.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-thumb-view.c' object='libeog_la-eog-thumb-view.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-thumb-view.lo `test -f 'eog-thumb-view.c' || echo '$(srcdir)/'`eog-thumb-view.c - -libeog_la-eog-transform.lo: eog-transform.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-transform.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-transform.Tpo -c -o libeog_la-eog-transform.lo `test -f 'eog-transform.c' || echo '$(srcdir)/'`eog-transform.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-transform.Tpo $(DEPDIR)/libeog_la-eog-transform.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-transform.c' object='libeog_la-eog-transform.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-transform.lo `test -f 'eog-transform.c' || echo '$(srcdir)/'`eog-transform.c - -libeog_la-eog-uri-converter.lo: eog-uri-converter.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-uri-converter.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-uri-converter.Tpo -c -o libeog_la-eog-uri-converter.lo `test -f 'eog-uri-converter.c' || echo '$(srcdir)/'`eog-uri-converter.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-uri-converter.Tpo $(DEPDIR)/libeog_la-eog-uri-converter.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-uri-converter.c' object='libeog_la-eog-uri-converter.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-uri-converter.lo `test -f 'eog-uri-converter.c' || echo '$(srcdir)/'`eog-uri-converter.c - -libeog_la-eog-util.lo: eog-util.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-util.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-util.Tpo -c -o libeog_la-eog-util.lo `test -f 'eog-util.c' || echo '$(srcdir)/'`eog-util.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-util.Tpo $(DEPDIR)/libeog_la-eog-util.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-util.c' object='libeog_la-eog-util.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-util.lo `test -f 'eog-util.c' || echo '$(srcdir)/'`eog-util.c - -libeog_la-eog-window-activatable.lo: eog-window-activatable.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-window-activatable.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-window-activatable.Tpo -c -o libeog_la-eog-window-activatable.lo `test -f 'eog-window-activatable.c' || echo '$(srcdir)/'`eog-window-activatable.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-window-activatable.Tpo $(DEPDIR)/libeog_la-eog-window-activatable.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-window-activatable.c' object='libeog_la-eog-window-activatable.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-window-activatable.lo `test -f 'eog-window-activatable.c' || echo '$(srcdir)/'`eog-window-activatable.c - -libeog_la-eog-window.lo: eog-window.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-window.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-window.Tpo -c -o libeog_la-eog-window.lo `test -f 'eog-window.c' || echo '$(srcdir)/'`eog-window.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-window.Tpo $(DEPDIR)/libeog_la-eog-window.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-window.c' object='libeog_la-eog-window.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-window.lo `test -f 'eog-window.c' || echo '$(srcdir)/'`eog-window.c - -libeog_la-eog-zoom-entry.lo: eog-zoom-entry.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-zoom-entry.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-zoom-entry.Tpo -c -o libeog_la-eog-zoom-entry.lo `test -f 'eog-zoom-entry.c' || echo '$(srcdir)/'`eog-zoom-entry.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-zoom-entry.Tpo $(DEPDIR)/libeog_la-eog-zoom-entry.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-zoom-entry.c' object='libeog_la-eog-zoom-entry.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-zoom-entry.lo `test -f 'eog-zoom-entry.c' || echo '$(srcdir)/'`eog-zoom-entry.c - -libeog_la-zoom.lo: zoom.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-zoom.lo -MD -MP -MF $(DEPDIR)/libeog_la-zoom.Tpo -c -o libeog_la-zoom.lo `test -f 'zoom.c' || echo '$(srcdir)/'`zoom.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-zoom.Tpo $(DEPDIR)/libeog_la-zoom.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='zoom.c' object='libeog_la-zoom.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-zoom.lo `test -f 'zoom.c' || echo '$(srcdir)/'`zoom.c - -libeog_la-eog-metadata-details.lo: eog-metadata-details.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-metadata-details.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-metadata-details.Tpo -c -o libeog_la-eog-metadata-details.lo `test -f 'eog-metadata-details.c' || echo '$(srcdir)/'`eog-metadata-details.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-metadata-details.Tpo $(DEPDIR)/libeog_la-eog-metadata-details.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-metadata-details.c' object='libeog_la-eog-metadata-details.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-metadata-details.lo `test -f 'eog-metadata-details.c' || echo '$(srcdir)/'`eog-metadata-details.c - -libeog_la-eog-exif-util.lo: eog-exif-util.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-exif-util.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-exif-util.Tpo -c -o libeog_la-eog-exif-util.lo `test -f 'eog-exif-util.c' || echo '$(srcdir)/'`eog-exif-util.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-exif-util.Tpo $(DEPDIR)/libeog_la-eog-exif-util.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-exif-util.c' object='libeog_la-eog-exif-util.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-exif-util.lo `test -f 'eog-exif-util.c' || echo '$(srcdir)/'`eog-exif-util.c - -libeog_la-eog-enum-types.lo: eog-enum-types.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-enum-types.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-enum-types.Tpo -c -o libeog_la-eog-enum-types.lo `test -f 'eog-enum-types.c' || echo '$(srcdir)/'`eog-enum-types.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-enum-types.Tpo $(DEPDIR)/libeog_la-eog-enum-types.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-enum-types.c' object='libeog_la-eog-enum-types.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-enum-types.lo `test -f 'eog-enum-types.c' || echo '$(srcdir)/'`eog-enum-types.c - -libeog_la-eog-resources.lo: eog-resources.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-resources.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-resources.Tpo -c -o libeog_la-eog-resources.lo `test -f 'eog-resources.c' || echo '$(srcdir)/'`eog-resources.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-resources.Tpo $(DEPDIR)/libeog_la-eog-resources.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-resources.c' object='libeog_la-eog-resources.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-resources.lo `test -f 'eog-resources.c' || echo '$(srcdir)/'`eog-resources.c - -libeog_la-eog-marshal.lo: eog-marshal.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -MT libeog_la-eog-marshal.lo -MD -MP -MF $(DEPDIR)/libeog_la-eog-marshal.Tpo -c -o libeog_la-eog-marshal.lo `test -f 'eog-marshal.c' || echo '$(srcdir)/'`eog-marshal.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libeog_la-eog-marshal.Tpo $(DEPDIR)/libeog_la-eog-marshal.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='eog-marshal.c' object='libeog_la-eog-marshal.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libeog_la_CPPFLAGS) $(CPPFLAGS) $(libeog_la_CFLAGS) $(CFLAGS) -c -o libeog_la-eog-marshal.lo `test -f 'eog-marshal.c' || echo '$(srcdir)/'`eog-marshal.c - -eog-main.o: main.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(eog_CFLAGS) $(CFLAGS) -MT eog-main.o -MD -MP -MF $(DEPDIR)/eog-main.Tpo -c -o eog-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/eog-main.Tpo $(DEPDIR)/eog-main.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='main.c' object='eog-main.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(eog_CFLAGS) $(CFLAGS) -c -o eog-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c - -eog-main.obj: main.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(eog_CFLAGS) $(CFLAGS) -MT eog-main.obj -MD -MP -MF $(DEPDIR)/eog-main.Tpo -c -o eog-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/eog-main.Tpo $(DEPDIR)/eog-main.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='main.c' object='eog-main.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(eog_CFLAGS) $(CFLAGS) -c -o eog-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi` - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-girDATA: $(gir_DATA) - @$(NORMAL_INSTALL) - @list='$(gir_DATA)'; test -n "$(girdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(girdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(girdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(girdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(girdir)" || exit $$?; \ - done - -uninstall-girDATA: - @$(NORMAL_UNINSTALL) - @list='$(gir_DATA)'; test -n "$(girdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(girdir)'; $(am__uninstall_files_from_dir) -install-headerDATA: $(header_DATA) - @$(NORMAL_INSTALL) - @list='$(header_DATA)'; test -n "$(headerdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(headerdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(headerdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(headerdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(headerdir)" || exit $$?; \ - done - -uninstall-headerDATA: - @$(NORMAL_UNINSTALL) - @list='$(header_DATA)'; test -n "$(headerdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(headerdir)'; $(am__uninstall_files_from_dir) -install-typelibDATA: $(typelib_DATA) - @$(NORMAL_INSTALL) - @list='$(typelib_DATA)'; test -n "$(typelibdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(typelibdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(typelibdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(typelibdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(typelibdir)" || exit $$?; \ - done - -uninstall-typelibDATA: - @$(NORMAL_UNINSTALL) - @list='$(typelib_DATA)'; test -n "$(typelibdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(typelibdir)'; $(am__uninstall_files_from_dir) - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook -check-am: all-am -check: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) check-am -all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) -installdirs: - for dir in "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(girdir)" "$(DESTDIR)$(headerdir)" "$(DESTDIR)$(typelibdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libtool \ - clean-pkglibLTLIBRARIES mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-girDATA install-headerDATA \ - install-typelibDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-binPROGRAMS install-pkglibLTLIBRARIES - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS uninstall-girDATA \ - uninstall-headerDATA uninstall-pkglibLTLIBRARIES \ - uninstall-typelibDATA - -.MAKE: all check install install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \ - clean-binPROGRAMS clean-generic clean-libtool \ - clean-pkglibLTLIBRARIES cscopelist-am ctags ctags-am dist-hook \ - distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-binPROGRAMS \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-girDATA \ - install-headerDATA install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-pkglibLTLIBRARIES install-ps install-ps-am \ - install-strip install-typelibDATA installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ - uninstall-am uninstall-binPROGRAMS uninstall-girDATA \ - uninstall-headerDATA uninstall-pkglibLTLIBRARIES \ - uninstall-typelibDATA - -.PRECIOUS: Makefile - - -eog-resources.c: $(top_srcdir)/src/eog.gresource.xml $(eog_resources_deps) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) "$<" --target=$@ \ - --sourcedir=$(top_srcdir)/data --c-name _eog --generate-source - -eog-enum-types.h: eog-enum-types.h.template $(INST_H_FILES) $(GLIB_MKENUMS) - $(AM_V_GEN)(cd $(srcdir) && $(GLIB_MKENUMS) --template eog-enum-types.h.template $(INST_H_FILES)) > $@ - -eog-enum-types.c: eog-enum-types.c.template $(INST_H_FILES) $(GLIB_MKENUMS) - $(AM_V_GEN)(cd $(srcdir) && $(GLIB_MKENUMS) --template eog-enum-types.c.template $(INST_H_FILES)) > $@ - -eog-marshal.h: eog-marshal.list $(GLIB_GENMARSHAL) - $(AM_V_GEN)$(GLIB_GENMARSHAL) $< --header --internal --prefix=eog_marshal > $@ - -eog-marshal.c: eog-marshal.list $(GLIB_GENMARSHAL) - $(AM_V_GEN)$(GLIB_GENMARSHAL) $< --body --header --prefix=eog_marshal > $@ - -@HAVE_INTROSPECTION_TRUE@-include $(INTROSPECTION_MAKEFILE) - -@HAVE_INTROSPECTION_TRUE@Eog-3.0.gir: eog - -dist-hook: - cd $(distdir); rm -f $(BUILT_SOURCES) - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru eog-3.26.2/src/meson.build eog-3.27.90/src/meson.build --- eog-3.26.2/src/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/src/meson.build 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,209 @@ +src_inc = include_directories('.') + +cflags = [ + '-DEOG_DATA_DIR="@0@"'.format(eog_datadir), + '-DEOG_LOCALE_DIR="@0@"'.format(eog_localedir) +] + +enum_headers = files( + 'eog-scroll-view.h', + 'eog-window.h' +) + +gnome.mkenums( + 'org.gnome.eog.enums.xml', + sources: enum_headers, + comments: '', + fhead: '', + vhead: ' <@type@ id="org.gnome.eog.@EnumName@">', + vprod: ' ', + vtail: ' ', + ftail: '', + install_header: true, + install_dir: eog_schemadir +) + +headers = enum_headers + files( + 'eog-application.h', + 'eog-application-activatable.h', + 'eog-clipboard-handler.h', + 'eog-debug.h', + 'eog-enums.h', + 'eog-file-chooser.h', + 'eog-image.h', + 'eog-image-save-info.h', + 'eog-job-scheduler.h', + 'eog-jobs.h', + 'eog-list-store.h', + 'eog-properties-dialog.h', + 'eog-sidebar.h', + 'eog-statusbar.h', + 'eog-thumbnail.h', + 'eog-thumb-nav.h', + 'eog-thumb-view.h', + 'eog-transform.h', + 'eog-uri-converter.h', + 'eog-window-activatable.h' +) + +sources = files( + 'eog-application.c', + 'eog-application-activatable.c', + 'eog-clipboard-handler.c', + 'eog-close-confirmation-dialog.c', + 'eog-debug.c', + 'eog-error-message-area.c', + 'eog-file-chooser.c', + 'eog-image.c', + 'eog-image-jpeg.c', + 'eog-image-save-info.c', + 'eog-job-scheduler.c', + 'eog-jobs.c', + 'eog-list-store.c', + 'eog-metadata-sidebar.c', + 'eog-metadata-reader.c', + 'eog-metadata-reader-jpg.c', + 'eog-metadata-reader-png.c', + 'eog-pixbuf-util.c', + 'eog-plugin-engine.c', + 'eog-preferences-dialog.c', + 'eog-print.c', + 'eog-print-image-setup.c', + 'eog-print-preview.c', + 'eog-properties-dialog.c', + 'eog-save-as-dialog-helper.c', + 'eog-scroll-view.c', + 'eog-session.c', + 'eog-sidebar.c', + 'eog-statusbar.c', + 'eog-thumbnail.c', + 'eog-thumb-nav.c', + 'eog-thumb-view.c', + 'eog-transform.c', + 'eog-uri-converter.c', + 'eog-util.c', + 'eog-window-activatable.c', + 'eog-window.c', + 'eog-zoom-entry.c', + 'zoom.c' +) + +if have_exif + headers += files('eog-exif-util.h') + sources += files('eog-exif-util.c') +endif + +if have_exif or have_exempi + sources += files('eog-metadata-details.c') +endif + +install_headers( + headers, + subdir: join_paths(eog_api_name, meson.project_name()) +) + +sources += gnome.compile_resources( + 'eog-resources', + 'eog.gresource.xml', + source_dir: data_dir, + c_name: '_eog', + dependencies: resource_data, + export: true +) + +enum = 'eog-enum-types' + +sources += gnome.mkenums( + enum, + sources: headers, + c_template: enum + '.c.template', + h_template: enum + '.h.template' +) + +marshal = 'eog-marshal' + +sources += gnome.genmarshal( + marshal, + sources: marshal + '.list', + prefix: 'eog_marshal', + internal: true +) + +deps = eog_deps + jpeg_deps + +libeog_cflags = cflags + [ + '-DEOG_PLUGIN_DIR="@0@"'.format(eog_pluginsdir), + '-DEOG_PREFIX="@0@"'.format(eog_prefix), + '-DG_LOG_DOMAIN="@0@"'.format(meson.project_name().to_upper()), + '-DLIBDIR="@0@"'.format(eog_libdir) +] + +symbol_map = join_paths(meson.current_source_dir(), 'symbol.map') + +ldflags = [] +if have_version_script + ldflags += '-Wl,--version-script,@0@'.format(symbol_map) +endif + +libeog = shared_library( + meson.project_name(), + sources: sources, + include_directories: top_inc, + dependencies: deps, + c_args: libeog_cflags, + link_args: ldflags, + link_depends: symbol_map, + install: true, + install_dir: join_paths(get_option('libdir'), meson.project_name()) +) + +libeog_dep = declare_dependency( + link_with: libeog, + include_directories: src_inc, + dependencies: eog_deps +) + +pkg.generate( + libraries: libeog, + version: eog_version, + name: 'Eye of GNOME', + description: 'The GNOME Image Viewer', + filebase: meson.project_name(), + subdirs: eog_api_name, + requires: 'gtk+-3.0', + variables: [ + 'exec_prefix=' + eog_libexecdir, + 'pluginsdir=' + eog_pluginsdir + ], + install_dir: join_paths(eog_libdir, 'pkgconfig') +) + +eog = executable( + meson.project_name(), + 'main.c', + include_directories: top_inc, + dependencies: libeog_dep, + c_args: cflags, + install: true, + install_dir: eog_bindir, + install_rpath: eog_pkglibdir +) + +if have_gir + gir_sources = sources + headers + + gir_dir = join_paths(eog_pkgdatadir, 'gir-' + eog_gir_version) + typelib_dir = join_paths(eog_pkglibdir, 'girepository-' + eog_gir_version) + + gnome.generate_gir( + eog, + sources: gir_sources, + nsversion: eog_api_version, + namespace: eog_gir_ns, + includes: 'Gtk-3.0', + extra_args: '--warn-all', + install: true, + install_dir_gir: gir_dir, + install_dir_typelib: typelib_dir + ) +endif diff -Nru eog-3.26.2/src/symbol.map eog-3.27.90/src/symbol.map --- eog-3.26.2/src/symbol.map 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/src/symbol.map 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,6 @@ +{ +global: + eog_*; +local: + *; +}; diff -Nru eog-3.26.2/src/test-eog-tb.c eog-3.27.90/src/test-eog-tb.c --- eog-3.26.2/src/test-eog-tb.c 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/src/test-eog-tb.c 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,239 @@ +/* gcc -o eog-thumb-view test-eog-tb.c eog-thumb-view.c `pkg-config --cflags --libs gtk+-2.0 gio-2.0` */ + +#include +#include +#include "eog-thumbnail.h" +#include "eog-image.h" +#include "eog-thumb-view.h" +#include "eog-list-store.h" +#include "eog-job-queue.h" + +static void +tb_on_selection_changed (GtkIconView *thumb_view, + gpointer data) +{ + GList *list, *item; + EogImage *image; + + g_print ("selection changed: %i\n", + eog_thumb_view_get_n_selected (EOG_THUMB_VIEW (thumb_view))); + + list = eog_thumb_view_get_selected_images (EOG_THUMB_VIEW (thumb_view)); + if (list) { + g_print ("selected images at: "); + for (item = list; item != NULL; item = item->next) { + image = EOG_IMAGE (item->data); + g_print ("%s ", eog_image_get_caption (image)); +/* g_free (item->data); */ + } + g_print ("\n"); + + g_list_free (list); + } + else { + g_print ("no images selected\n"); + } +} + +static void +on_button_sfi_clicked (GtkButton *button, + gpointer data) +{ + EogThumbView *tb = EOG_THUMB_VIEW (data); + GtkTreeIter iter; + EogImage *image; + GtkTreeModel *model = gtk_icon_view_get_model (GTK_ICON_VIEW (tb)); + gtk_tree_model_get_iter_first (model, &iter); + + gtk_tree_model_get (model, &iter, + EOG_LIST_STORE_EOG_IMAGE, &image, + -1); + + eog_thumb_view_set_current_image (tb, image, TRUE); + + g_object_unref (G_OBJECT (image)); +} + +static void +on_button_next_clicked (GtkButton *button, + gpointer data) +{ + EogThumbView *tb = EOG_THUMB_VIEW (data); + + eog_thumb_view_select_single (tb, EOG_THUMB_VIEW_SELECT_RIGHT); +} + +static void +on_button_back_clicked (GtkButton *button, + gpointer data) +{ + EogThumbView *tb = EOG_THUMB_VIEW (data); + + eog_thumb_view_select_single (tb, EOG_THUMB_VIEW_SELECT_LEFT); +} + +static void +on_button_first_clicked (GtkButton *button, + gpointer data) +{ + EogThumbView *tb = EOG_THUMB_VIEW (data); + + eog_thumb_view_select_single (tb, EOG_THUMB_VIEW_SELECT_FIRST); +} + +static void +on_button_last_clicked (GtkButton *button, + gpointer data) +{ + EogThumbView *tb = EOG_THUMB_VIEW (data); + + eog_thumb_view_select_single (tb, EOG_THUMB_VIEW_SELECT_LAST); +} + + +static GFile* +make_file (const char *path) +{ + GFile *file = NULL; + + file = g_file_new_for_commandline_arg (path); + + return file; +} + +static GList* +string_array_to_list (gchar **files, gint n_files) +{ + gint i; + GList *list = NULL; + + if (files == NULL || n_files == 0) { + return list; + } + + for (i = 0; i < n_files; i++) { + list = g_list_prepend (list, make_file (files [i])); + g_print ("%s\n", files[i]); + } + return g_list_reverse (list); +} + +static void +do_something_with_test_1 (void) +{ + g_print ("do something with test 1\n"); +} + +static const gchar *ui = "\n" + " \n" + " \n" + " \n" + "\n\0"; + +static const GtkActionEntry entries[] = { + { "PopupAction", NULL, ""}, + { "ItemAction", GTK_STOCK_OPEN, "Test 1", NULL, NULL, G_CALLBACK (do_something_with_test_1) }, +}; + +int +main (gint argc, gchar **argv) +{ + GtkWidget *window; + GtkWidget *vbox; + GtkWidget *hbox; + GtkWidget *button; + GtkActionGroup *action_group; + GList *list_uris; + GtkUIManager *ui_manager; + GtkWidget *popup; + GError *error = NULL; + + GtkWidget *scrolled_window; + GtkWidget *thumb_view; + GtkListStore *model; + + gtk_init (&argc, &argv); + eog_thumbnail_init (); + eog_job_queue_init (); + + window = gtk_window_new (GTK_WINDOW_TOPLEVEL); + g_signal_connect (G_OBJECT (window), + "delete-event", + G_CALLBACK (gtk_main_quit), + NULL); + gtk_window_set_default_size (GTK_WINDOW (window), + 640, 480); + + thumb_view = eog_thumb_view_new (); + model = eog_list_store_new (); + + action_group = gtk_action_group_new ("MenuActions"); + gtk_action_group_add_actions (action_group, entries, G_N_ELEMENTS (entries), thumb_view); + + ui_manager = gtk_ui_manager_new (); + gtk_ui_manager_insert_action_group (ui_manager, action_group, 0); + + if (!gtk_ui_manager_add_ui_from_string (ui_manager, ui, -1, &error)) { + g_warning ("Couldn't load menu definition: %s\n", error->message); + g_error_free (error); + return 1; + } + + popup = g_object_ref (gtk_ui_manager_get_widget (ui_manager, "/ThumbnailPopup")); + + g_object_unref (ui_manager); + eog_thumb_view_set_thumbnail_popup (EOG_THUMB_VIEW (thumb_view), popup); + + g_signal_connect (G_OBJECT (thumb_view), + "selection-changed", + G_CALLBACK (tb_on_selection_changed), + window); + + scrolled_window = gtk_scrolled_window_new (NULL, NULL); + gtk_container_add (GTK_CONTAINER (scrolled_window), GTK_WIDGET (thumb_view)); + gtk_scrolled_window_set_policy (GTK_SCROLLED_WINDOW (scrolled_window), + GTK_POLICY_AUTOMATIC, GTK_POLICY_AUTOMATIC); + + vbox = gtk_vbox_new (FALSE, 0); + hbox = gtk_hbox_new (FALSE, 0); + + button = gtk_button_new_with_label ("Select first image"); + g_signal_connect (G_OBJECT (button), "clicked", + G_CALLBACK (on_button_sfi_clicked), thumb_view); + gtk_box_pack_start (GTK_BOX (hbox), button, FALSE, FALSE, 0); + + button = gtk_button_new_from_stock (GTK_STOCK_GOTO_FIRST); + g_signal_connect (G_OBJECT (button), "clicked", + G_CALLBACK (on_button_first_clicked), thumb_view); + gtk_box_pack_start (GTK_BOX (hbox), button, FALSE, FALSE, 0); + + button = gtk_button_new_from_stock (GTK_STOCK_GO_BACK); + g_signal_connect (G_OBJECT (button), "clicked", + G_CALLBACK (on_button_back_clicked), thumb_view); + gtk_box_pack_start (GTK_BOX (hbox), button, FALSE, FALSE, 0); + + button = gtk_button_new_from_stock (GTK_STOCK_GO_FORWARD); + g_signal_connect (G_OBJECT (button), "clicked", + G_CALLBACK (on_button_next_clicked), thumb_view); + gtk_box_pack_start (GTK_BOX (hbox), button, FALSE, FALSE, 0); + + button = gtk_button_new_from_stock (GTK_STOCK_GOTO_LAST); + g_signal_connect (G_OBJECT (button), "clicked", + G_CALLBACK (on_button_last_clicked), thumb_view); + gtk_box_pack_start (GTK_BOX (hbox), button, FALSE, FALSE, 0); + + gtk_box_pack_start (GTK_BOX (vbox), hbox, FALSE, FALSE, 10); + + gtk_box_pack_start (GTK_BOX (vbox), scrolled_window, TRUE, TRUE, 0); + + gtk_container_add (GTK_CONTAINER (window), vbox); + gtk_widget_show_all (window); + + list_uris = string_array_to_list (argv + 1, argc - 1); + + eog_list_store_add_uris (EOG_LIST_STORE (model), list_uris); + eog_thumb_view_set_model (EOG_THUMB_VIEW (thumb_view), EOG_LIST_STORE (model)); + + gtk_main (); + return 0; +} diff -Nru eog-3.26.2/src/uta.c eog-3.27.90/src/uta.c --- eog-3.26.2/src/uta.c 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/src/uta.c 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,1116 @@ +/* Eye of Gnome image viewer - Microtile array utilities + * + * Copyright (C) 2000-2009 The Free Software Foundation + * + * Author: Federico Mena-Quintero + * + * Portions based on code from libart_lgpl by Raph Levien. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include +#include +#include "uta.h" + +#define EOG_UTA_BBOX_CONS(x0, y0, x1, y1) (((x0) << 24) | ((y0) << 16) | \ + ((x1) << 8) | (y1)) + +#define EOG_UTA_BBOX_X0(ub) ((ub) >> 24) +#define EOG_UTA_BBOX_Y0(ub) (((ub) >> 16) & 0xff) +#define EOG_UTA_BBOX_X1(ub) (((ub) >> 8) & 0xff) +#define EOG_UTA_BBOX_Y1(ub) ((ub) & 0xff) + +#define eog_renew(p, type, n) ((type *)g_realloc (p, (n) * sizeof(type))) +/* This one must be used carefully - in particular, p and max should + be variables. They can also be pstruct->el lvalues. */ +#define eog_expand(p, type, max) do { if(max) { p = eog_renew (p, type, max <<= 1); } else { max = 1; p = g_new(type, 1); } } while (0) + + + +/** + * eog_uta_new: Allocate a new uta. + * @x0: Left coordinate of uta. + * @y0: Top coordinate of uta. + * @x1: Right coordinate of uta. + * @y1: Bottom coordinate of uta. + * + * Allocates a new microtile array. The arguments are in units of + * tiles, not pixels. + * + * Returns: the newly allocated #EogUta. + **/ +static EogUta * +eog_uta_new (int x0, int y0, int x1, int y1) +{ + EogUta *uta; + + uta = g_new (EogUta, 1); + uta->x0 = x0; + uta->y0 = y0; + uta->width = x1 - x0; + uta->height = y1 - y0; + + uta->utiles = g_new0 (EogUtaBbox, uta->width * uta->height); + + return uta; +} + +/** + * eog_uta_free: Free a uta. + * @uta: The uta to free. + * + * Frees the microtile array structure, including the actual microtile + * data. + **/ +void +eog_uta_free (EogUta *uta) +{ + g_free (uta->utiles); + g_free (uta); +} + +/** + * eog_irect_intersect: Find intersection of two integer rectangles. + * @dest: Where the result is stored. + * @src1: A source rectangle. + * @src2: Another source rectangle. + * + * Finds the intersection of @src1 and @src2. + **/ +void +eog_irect_intersect (EogIRect *dest, const EogIRect *src1, const EogIRect *src2) { + dest->x0 = MAX (src1->x0, src2->x0); + dest->y0 = MAX (src1->y0, src2->y0); + dest->x1 = MIN (src1->x1, src2->x1); + dest->y1 = MIN (src1->y1, src2->y1); +} + +/** + * eog_irect_empty: Determine whether integer rectangle is empty. + * @src: The source rectangle. + * + * Return value: TRUE if @src is an empty rectangle, FALSE otherwise. + **/ +int +eog_irect_empty (const EogIRect *src) { + return (src->x1 <= src->x0 || src->y1 <= src->y0); +} + +/** + * eog_uta_from_irect: Generate uta covering a rectangle. + * @bbox: The source rectangle. + * + * Generates a uta exactly covering @bbox. Please do not call this + * function with a @bbox with zero height or width. + * + * Return value: the new uta. + **/ +static EogUta * +eog_uta_from_irect (EogIRect *bbox) +{ + EogUta *uta; + EogUtaBbox *utiles; + EogUtaBbox bb; + int width, height; + int x, y; + int xf0, yf0, xf1, yf1; + int ix; + + uta = g_new (EogUta, 1); + uta->x0 = bbox->x0 >> EOG_UTILE_SHIFT; + uta->y0 = bbox->y0 >> EOG_UTILE_SHIFT; + width = ((bbox->x1 + EOG_UTILE_SIZE - 1) >> EOG_UTILE_SHIFT) - uta->x0; + height = ((bbox->y1 + EOG_UTILE_SIZE - 1) >> EOG_UTILE_SHIFT) - uta->y0; + utiles = g_new (EogUtaBbox, width * height); + + uta->width = width; + uta->height = height; + uta->utiles = utiles; + + xf0 = bbox->x0 & (EOG_UTILE_SIZE - 1); + yf0 = bbox->y0 & (EOG_UTILE_SIZE - 1); + xf1 = ((bbox->x1 - 1) & (EOG_UTILE_SIZE - 1)) + 1; + yf1 = ((bbox->y1 - 1) & (EOG_UTILE_SIZE - 1)) + 1; + if (height == 1) + { + if (width == 1) + utiles[0] = EOG_UTA_BBOX_CONS (xf0, yf0, xf1, yf1); + else + { + utiles[0] = EOG_UTA_BBOX_CONS (xf0, yf0, EOG_UTILE_SIZE, yf1); + bb = EOG_UTA_BBOX_CONS (0, yf0, EOG_UTILE_SIZE, yf1); + for (x = 1; x < width - 1; x++) + utiles[x] = bb; + utiles[x] = EOG_UTA_BBOX_CONS (0, yf0, xf1, yf1); + } + } + else + { + if (width == 1) + { + utiles[0] = EOG_UTA_BBOX_CONS (xf0, yf0, xf1, EOG_UTILE_SIZE); + bb = EOG_UTA_BBOX_CONS (xf0, 0, xf1, EOG_UTILE_SIZE); + for (y = 1; y < height - 1; y++) + utiles[y] = bb; + utiles[y] = EOG_UTA_BBOX_CONS (xf0, 0, xf1, yf1); + } + else + { + utiles[0] = + EOG_UTA_BBOX_CONS (xf0, yf0, EOG_UTILE_SIZE, EOG_UTILE_SIZE); + bb = EOG_UTA_BBOX_CONS (0, yf0, EOG_UTILE_SIZE, EOG_UTILE_SIZE); + for (x = 1; x < width - 1; x++) + utiles[x] = bb; + utiles[x] = EOG_UTA_BBOX_CONS (0, yf0, xf1, EOG_UTILE_SIZE); + ix = width; + for (y = 1; y < height - 1; y++) + { + utiles[ix++] = + EOG_UTA_BBOX_CONS (xf0, 0, EOG_UTILE_SIZE, EOG_UTILE_SIZE); + bb = EOG_UTA_BBOX_CONS (0, 0, EOG_UTILE_SIZE, EOG_UTILE_SIZE); + for (x = 1; x < width - 1; x++) + utiles[ix++] = bb; + utiles[ix++] = EOG_UTA_BBOX_CONS (0, 0, xf1, EOG_UTILE_SIZE); + } + utiles[ix++] = EOG_UTA_BBOX_CONS (xf0, 0, EOG_UTILE_SIZE, yf1); + bb = EOG_UTA_BBOX_CONS (0, 0, EOG_UTILE_SIZE, yf1); + for (x = 1; x < width - 1; x++) + utiles[ix++] = bb; + utiles[ix++] = EOG_UTA_BBOX_CONS (0, 0, xf1, yf1); + } + } + return uta; +} + + +/** + * uta_ensure_size: + * @uta: A microtile array. + * @x1: Left microtile coordinate that must fit in new array. + * @y1: Top microtile coordinate that must fit in new array. + * @x2: Right microtile coordinate that must fit in new array. + * @y2: Bottom microtile coordinate that must fit in new array. + * + * Ensures that the size of a microtile array is big enough to fit the specified + * microtile coordinates. If it is not big enough, the specified @uta will be + * freed and a new one will be returned. Otherwise, the original @uta will be + * returned. If a new microtile array needs to be created, this function will + * copy the @uta's contents to the new array. + * + * Note that the specified coordinates must have already been scaled down by the + * ART_UTILE_SHIFT factor. + * + * Return value: The same value as @uta if the original microtile array was + * big enough to fit the specified microtile coordinates, or a new array if + * it needed to be grown. In the second case, the original @uta will be + * freed automatically. + **/ +EogUta * +uta_ensure_size (EogUta *uta, int x1, int y1, int x2, int y2) +{ + EogUta *new_uta; + EogUtaBbox *utiles, *new_utiles; + int new_ofs, ofs; + int x, y; + + g_return_val_if_fail (x1 < x2, NULL); + g_return_val_if_fail (y1 < y2, NULL); + + if (!uta) + return eog_uta_new (x1, y1, x2, y2); + + if (x1 >= uta->x0 + && y1 >= uta->y0 + && x2 <= uta->x0 + uta->width + && y2 <= uta->y0 + uta->height) + return uta; + + new_uta = g_new (EogUta, 1); + + new_uta->x0 = MIN (uta->x0, x1); + new_uta->y0 = MIN (uta->y0, y1); + new_uta->width = MAX (uta->x0 + uta->width, x2) - new_uta->x0; + new_uta->height = MAX (uta->y0 + uta->height, y2) - new_uta->y0; + new_uta->utiles = g_new (EogUtaBbox, new_uta->width * new_uta->height); + + utiles = uta->utiles; + new_utiles = new_uta->utiles; + + new_ofs = 0; + + for (y = new_uta->y0; y < new_uta->y0 + new_uta->height; y++) { + if (y < uta->y0 || y >= uta->y0 + uta->height) + for (x = 0; x < new_uta->width; x++) + new_utiles[new_ofs++] = 0; + else { + ofs = (y - uta->y0) * uta->width; + + for (x = new_uta->x0; x < new_uta->x0 + new_uta->width; x++) + if (x < uta->x0 || x >= uta->x0 + uta->width) + new_utiles[new_ofs++] = 0; + else + new_utiles[new_ofs++] = utiles[ofs++]; + } + } + + eog_uta_free (uta); + return new_uta; +} + +/** + * uta_add_rect: + * @uta: A microtile array, or NULL if a new array should be created. + * @x1: Left coordinate of rectangle. + * @y1: Top coordinate of rectangle. + * @x2: Right coordinate of rectangle. + * @y2: Bottom coordinate of rectangle. + * + * Adds the specified rectangle to a microtile array. The array is + * grown to fit the rectangle if necessary. + * + * Return value: The original @uta, or a new microtile array if the original one + * needed to be grown to fit the specified rectangle. In the second case, the + * original @uta will be freed automatically. + **/ +EogUta * +uta_add_rect (EogUta *uta, int x1, int y1, int x2, int y2) +{ + EogUtaBbox *utiles; + EogUtaBbox bb; + int rect_x1, rect_y1, rect_x2, rect_y2; + int xf1, yf1, xf2, yf2; + int x, y; + int ofs; + + g_return_val_if_fail (x1 < x2, NULL); + g_return_val_if_fail (y1 < y2, NULL); + + /* Empty uta */ + + if (!uta) { + EogIRect r; + + r.x0 = x1; + r.y0 = y1; + r.x1 = x2; + r.y1 = y2; + + return eog_uta_from_irect (&r); + } + + /* Grow the uta if necessary */ + + rect_x1 = x1 >> EOG_UTILE_SHIFT; + rect_y1 = y1 >> EOG_UTILE_SHIFT; + rect_x2 = (x2 + EOG_UTILE_SIZE - 1) >> EOG_UTILE_SHIFT; + rect_y2 = (y2 + EOG_UTILE_SIZE - 1) >> EOG_UTILE_SHIFT; + + uta = uta_ensure_size (uta, rect_x1, rect_y1, rect_x2, rect_y2); + + /* Add the rectangle */ + + xf1 = x1 & (EOG_UTILE_SIZE - 1); + yf1 = y1 & (EOG_UTILE_SIZE - 1); + xf2 = ((x2 - 1) & (EOG_UTILE_SIZE - 1)) + 1; + yf2 = ((y2 - 1) & (EOG_UTILE_SIZE - 1)) + 1; + + utiles = uta->utiles; + + ofs = (rect_y1 - uta->y0) * uta->width + rect_x1 - uta->x0; + + if (rect_y2 - rect_y1 == 1) { + if (rect_x2 - rect_x1 == 1) { + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs] = EOG_UTA_BBOX_CONS ( + xf1, yf1, xf2, yf2); + else + utiles[ofs] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (bb), xf1), + MIN (EOG_UTA_BBOX_Y0 (bb), yf1), + MAX (EOG_UTA_BBOX_X1 (bb), xf2), + MAX (EOG_UTA_BBOX_Y1 (bb), yf2)); + } else { + /* Leftmost tile */ + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + xf1, yf1, EOG_UTILE_SIZE, yf2); + else + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (bb), xf1), + MIN (EOG_UTA_BBOX_Y0 (bb), yf1), + EOG_UTILE_SIZE, + MAX (EOG_UTA_BBOX_Y1 (bb), yf2)); + + /* Tiles in between */ + for (x = rect_x1 + 1; x < rect_x2 - 1; x++) { + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + 0, yf1, EOG_UTILE_SIZE, yf2); + else + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + 0, + MIN (EOG_UTA_BBOX_Y0 (bb), yf1), + EOG_UTILE_SIZE, + MAX (EOG_UTA_BBOX_Y1 (bb), yf2)); + } + + /* Rightmost tile */ + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs] = EOG_UTA_BBOX_CONS ( + 0, yf1, xf2, yf2); + else + utiles[ofs] = EOG_UTA_BBOX_CONS ( + 0, + MIN (EOG_UTA_BBOX_Y0 (bb), yf1), + MAX (EOG_UTA_BBOX_X1 (bb), xf2), + MAX (EOG_UTA_BBOX_Y1 (bb), yf2)); + } + } else { + if (rect_x2 - rect_x1 == 1) { + /* Topmost tile */ + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs] = EOG_UTA_BBOX_CONS ( + xf1, yf1, xf2, EOG_UTILE_SIZE); + else + utiles[ofs] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (bb), xf1), + MIN (EOG_UTA_BBOX_Y0 (bb), yf1), + MAX (EOG_UTA_BBOX_X1 (bb), xf2), + EOG_UTILE_SIZE); + ofs += uta->width; + + /* Tiles in between */ + for (y = rect_y1 + 1; y < rect_y2 - 1; y++) { + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs] = EOG_UTA_BBOX_CONS ( + xf1, 0, xf2, EOG_UTILE_SIZE); + else + utiles[ofs] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (bb), xf1), + 0, + MAX (EOG_UTA_BBOX_X1 (bb), xf2), + EOG_UTILE_SIZE); + ofs += uta->width; + } + + /* Bottommost tile */ + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs] = EOG_UTA_BBOX_CONS ( + xf1, 0, xf2, yf2); + else + utiles[ofs] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (bb), xf1), + 0, + MAX (EOG_UTA_BBOX_X1 (bb), xf2), + MAX (EOG_UTA_BBOX_Y1 (bb), yf2)); + } else { + /* Top row, leftmost tile */ + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + xf1, yf1, EOG_UTILE_SIZE, EOG_UTILE_SIZE); + else + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (bb), xf1), + MIN (EOG_UTA_BBOX_Y0 (bb), yf1), + EOG_UTILE_SIZE, + EOG_UTILE_SIZE); + + /* Top row, in between */ + for (x = rect_x1 + 1; x < rect_x2 - 1; x++) { + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + 0, yf1, EOG_UTILE_SIZE, EOG_UTILE_SIZE); + else + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + 0, + MIN (EOG_UTA_BBOX_Y0 (bb), yf1), + EOG_UTILE_SIZE, + EOG_UTILE_SIZE); + } + + /* Top row, rightmost tile */ + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs] = EOG_UTA_BBOX_CONS ( + 0, yf1, xf2, EOG_UTILE_SIZE); + else + utiles[ofs] = EOG_UTA_BBOX_CONS ( + 0, + MIN (EOG_UTA_BBOX_Y0 (bb), yf1), + MAX (EOG_UTA_BBOX_X1 (bb), xf2), + EOG_UTILE_SIZE); + + ofs += uta->width - (rect_x2 - rect_x1 - 1); + + /* Rows in between */ + for (y = rect_y1 + 1; y < rect_y2 - 1; y++) { + /* Leftmost tile */ + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + xf1, 0, EOG_UTILE_SIZE, EOG_UTILE_SIZE); + else + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (bb), xf1), + 0, + EOG_UTILE_SIZE, + EOG_UTILE_SIZE); + + /* Tiles in between */ + bb = EOG_UTA_BBOX_CONS (0, 0, EOG_UTILE_SIZE, EOG_UTILE_SIZE); + for (x = rect_x1 + 1; x < rect_x2 - 1; x++) + utiles[ofs++] = bb; + + /* Rightmost tile */ + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs] = EOG_UTA_BBOX_CONS ( + 0, 0, xf2, EOG_UTILE_SIZE); + else + utiles[ofs] = EOG_UTA_BBOX_CONS ( + 0, + 0, + MAX (EOG_UTA_BBOX_X1 (bb), xf2), + EOG_UTILE_SIZE); + + ofs += uta->width - (rect_x2 - rect_x1 - 1); + } + + /* Bottom row, leftmost tile */ + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + xf1, 0, EOG_UTILE_SIZE, yf2); + else + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (bb), xf1), + 0, + EOG_UTILE_SIZE, + MAX (EOG_UTA_BBOX_Y1 (bb), yf2)); + + /* Bottom row, tiles in between */ + for (x = rect_x1 + 1; x < rect_x2 - 1; x++) { + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + 0, 0, EOG_UTILE_SIZE, yf2); + else + utiles[ofs++] = EOG_UTA_BBOX_CONS ( + 0, + 0, + EOG_UTILE_SIZE, + MAX (EOG_UTA_BBOX_Y1 (bb), yf2)); + } + + /* Bottom row, rightmost tile */ + bb = utiles[ofs]; + if (bb == 0) + utiles[ofs] = EOG_UTA_BBOX_CONS ( + 0, 0, xf2, yf2); + else + utiles[ofs] = EOG_UTA_BBOX_CONS ( + 0, + 0, + MAX (EOG_UTA_BBOX_X1 (bb), xf2), + MAX (EOG_UTA_BBOX_Y1 (bb), yf2)); + } + } + + return uta; +} + +/** + * uta_remove_rect: + * @uta: A microtile array. + * @x1: Left coordinate of rectangle. + * @y1: Top coordinate of rectangle. + * @x2: Right coordinate of rectangle. + * @y2: Bottom coordinate of rectangle. + * + * Removes a rectangular region from the specified microtile array. Due to the + * way microtile arrays represent regions, the tiles at the edge of the + * rectangle may not be clipped exactly. + **/ +void +uta_remove_rect (EogUta *uta, int x1, int y1, int x2, int y2) +{ + EogUtaBbox *utiles; + int rect_x1, rect_y1, rect_x2, rect_y2; + int clip_x1, clip_y1, clip_x2, clip_y2; + int xf1, yf1, xf2, yf2; + int ofs; + int x, y; + + g_return_if_fail (uta != NULL); + g_return_if_fail (x1 <= x2); + g_return_if_fail (y1 <= y2); + + if (x1 == x2 || y1 == y2) + return; + + rect_x1 = x1 >> EOG_UTILE_SHIFT; + rect_y1 = y1 >> EOG_UTILE_SHIFT; + rect_x2 = (x2 + EOG_UTILE_SIZE - 1) >> EOG_UTILE_SHIFT; + rect_y2 = (y2 + EOG_UTILE_SIZE - 1) >> EOG_UTILE_SHIFT; + + clip_x1 = MAX (rect_x1, uta->x0); + clip_y1 = MAX (rect_y1, uta->y0); + clip_x2 = MIN (rect_x2, uta->x0 + uta->width); + clip_y2 = MIN (rect_y2, uta->y0 + uta->height); + + if (clip_x1 >= clip_x2 || clip_y1 >= clip_y2) + return; + + xf1 = x1 & (EOG_UTILE_SIZE - 1); + yf1 = y1 & (EOG_UTILE_SIZE - 1); + xf2 = ((x2 - 1) & (EOG_UTILE_SIZE - 1)) + 1; + yf2 = ((y2 - 1) & (EOG_UTILE_SIZE - 1)) + 1; + + utiles = uta->utiles; + + ofs = (clip_y1 - uta->y0) * uta->width + clip_x1 - uta->x0; + + for (y = clip_y1; y < clip_y2; y++) { + int cy1, cy2; + + if (y == rect_y1) + cy1 = yf1; + else + cy1 = 0; + + if (y == rect_y2 - 1) + cy2 = yf2; + else + cy2 = EOG_UTILE_SIZE; + + for (x = clip_x1; x < clip_x2; x++) { + int cx1, cx2; + EogUtaBbox bb; + int bb_x1, bb_y1, bb_x2, bb_y2; + int bb_cx1, bb_cy1, bb_cx2, bb_cy2; + + bb = utiles[ofs]; + bb_x1 = EOG_UTA_BBOX_X0 (bb); + bb_y1 = EOG_UTA_BBOX_Y0 (bb); + bb_x2 = EOG_UTA_BBOX_X1 (bb); + bb_y2 = EOG_UTA_BBOX_Y1 (bb); + + if (x == rect_x1) + cx1 = xf1; + else + cx1 = 0; + + if (x == rect_x2 - 1) + cx2 = xf2; + else + cx2 = EOG_UTILE_SIZE; + + /* Clip top and bottom */ + + if (cx1 <= bb_x1 && cx2 >= bb_x2) { + if (cy1 <= bb_y1 && cy2 > bb_y1) + bb_cy1 = cy2; + else + bb_cy1 = bb_y1; + + if (cy1 < bb_y2 && cy2 >= bb_y2) + bb_cy2 = cy1; + else + bb_cy2 = bb_y2; + } else { + bb_cy1 = bb_y1; + bb_cy2 = bb_y2; + } + + /* Clip left and right */ + + if (cy1 <= bb_y1 && cy2 >= bb_y2) { + if (cx1 <= bb_x1 && cx2 > bb_x1) + bb_cx1 = cx2; + else + bb_cx1 = bb_x1; + + if (cx1 < bb_x2 && cx2 >= bb_x2) + bb_cx2 = cx1; + else + bb_cx2 = bb_x2; + } else { + bb_cx1 = bb_x1; + bb_cx2 = bb_x2; + } + + if (bb_cx1 < bb_cx2 && bb_cy1 < bb_cy2) + utiles[ofs] = EOG_UTA_BBOX_CONS (bb_cx1, bb_cy1, + bb_cx2, bb_cy2); + else + utiles[ofs] = 0; + + ofs++; + } + + ofs += uta->width - (clip_x2 - clip_x1); + } +} + +void +uta_find_first_glom_rect (EogUta *uta, EogIRect *rect, int max_width, int max_height) +{ + EogIRect *rects; + int n_rects, n_rects_max; + int x, y; + int width, height; + int ix; + int left_ix; + EogUtaBbox *utiles; + EogUtaBbox bb; + int x0, y0, x1, y1; + int *glom; + int glom_rect; + + n_rects = 0; + n_rects_max = 1; + rects = g_new (EogIRect, n_rects_max); + + width = uta->width; + height = uta->height; + utiles = uta->utiles; + + glom = g_new (int, width * height); + for (ix = 0; ix < width * height; ix++) + glom[ix] = -1; + + ix = 0; + for (y = 0; y < height; y++) + for (x = 0; x < width; x++) + { + bb = utiles[ix]; + if (bb) + { + x0 = ((uta->x0 + x) << EOG_UTILE_SHIFT) + EOG_UTA_BBOX_X0(bb); + y0 = ((uta->y0 + y) << EOG_UTILE_SHIFT) + EOG_UTA_BBOX_Y0(bb); + y1 = ((uta->y0 + y) << EOG_UTILE_SHIFT) + EOG_UTA_BBOX_Y1(bb); + + left_ix = ix; + /* now try to extend to the right */ + while (x != width - 1 && + EOG_UTA_BBOX_X1(bb) == EOG_UTILE_SIZE && + (((bb & 0xffffff) ^ utiles[ix + 1]) & 0xffff00ff) == 0 && + (((uta->x0 + x + 1) << EOG_UTILE_SHIFT) + + EOG_UTA_BBOX_X1(utiles[ix + 1]) - + x0) <= max_width) + { + bb = utiles[ix + 1]; + ix++; + x++; + } + x1 = ((uta->x0 + x) << EOG_UTILE_SHIFT) + EOG_UTA_BBOX_X1(bb); + + + /* if rectangle nonempty */ + if ((x1 ^ x0) || (y1 ^ y0)) + { + /* try to glom onto an existing rectangle */ + glom_rect = glom[left_ix]; + if (glom_rect != -1 && + x0 == rects[glom_rect].x0 && + x1 == rects[glom_rect].x1 && + y0 == rects[glom_rect].y1 && + y1 - rects[glom_rect].y0 <= max_height) + { + rects[glom_rect].y1 = y1; + } + else + { + if (n_rects == n_rects_max) + eog_expand (rects, EogIRect, n_rects_max); + rects[n_rects].x0 = x0; + rects[n_rects].y0 = y0; + rects[n_rects].x1 = x1; + rects[n_rects].y1 = y1; + glom_rect = n_rects; + n_rects++; + } + if (y != height - 1) + glom[left_ix + width] = glom_rect; + } + } + ix++; + } + + if (n_rects > 0) { + rect->x0 = rects[0].x0; + rect->y0 = rects[0].y0; + rect->x1 = rects[0].x1; + rect->y1 = rects[0].y1; + } else + rect->x0 = rect->y0 = rect->x1 = rect->y1 = 0; + + g_free (glom); + g_free (rects); +} + +#if 0 + +void +uta_find_first_glom_rect (EogUta *uta, EogIRect *rect, int max_width, int max_height) +{ + EogUtaBbox *utiles; + EogUtaBbox bb; + int width, height; + int ofs; + int x, y; + int x1, y1, x2, y2; + + g_return_if_fail (uta != NULL); + g_return_if_fail (rect != NULL); + g_return_if_fail (max_width > 0 && max_height > 0); + + utiles = uta->utiles; + width = uta->width; + height = uta->height; + + ofs = 0; + + /* We find the first nonempty tile, and then grow the rectangle to the + * right and then down. + */ + + x1 = y1 = x2 = y2 = 0; + + for (y = 0; y < height; y++) { + for (x = 0; x < width; x++) { + bb = utiles[ofs]; + + if (!bb) { + ofs++; + continue; + } + + x1 = ((uta->x0 + x) << EOG_UTILE_SHIFT) + EOG_UTA_BBOX_X0 (bb); + y1 = ((uta->y0 + y) << EOG_UTILE_SHIFT) + EOG_UTA_BBOX_Y0 (bb); + y2 = ((uta->y0 + y) << EOG_UTILE_SHIFT) + EOG_UTA_BBOX_Y1 (bb); + + /* Grow to the right */ + + while (x != width - 1 + && EOG_UTA_BBOX_X1 (bb) == EOG_UTILE_SIZE + && (((bb & 0xffffff) ^ utiles[ofs + 1]) & 0xffff00ff) == 0 + && (((uta->x0 + x + 1) << EOG_UTILE_SHIFT) + + EOG_UTA_BBOX_X1 (utiles[ofs + 1]) + - x1) <= max_width) { + ofs++; + bb = utiles[ofs]; + x++; + } + + x2 = ((uta->x0 + x) << EOG_UTILE_SHIFT) + EOG_UTA_BBOX_X1 (bb); + goto grow_down; + } + } + + grow_down: + +} + +#endif + +/* Copies a single microtile to another location in the UTA, offsetted by the + * specified distance. A microtile can thus end up being added in a single part + * to another microtile, in two parts to two horizontally or vertically adjacent + * microtiles, or in four parts to a 2x2 square of microtiles. + * + * This is basically a normal BitBlt but with copying-forwards-to-the-destination + * instead of fetching-backwards-from-the-source. + */ +static void +copy_tile (EogUta *uta, int x, int y, int xofs, int yofs) +{ + EogUtaBbox *utiles; + EogUtaBbox bb, dbb; + int t_x1, t_y1, t_x2, t_y2; + int d_x1, d_y1, d_x2, d_y2; + int d_tx1, d_ty1; + int d_xf1, d_yf1, d_xf2, d_yf2; + int dofs; + + utiles = uta->utiles; + + bb = utiles[(y - uta->y0) * uta->width + x - uta->x0]; + + if (bb == 0) + return; + + t_x1 = EOG_UTA_BBOX_X0 (bb) + (x << EOG_UTILE_SHIFT); + t_y1 = EOG_UTA_BBOX_Y0 (bb) + (y << EOG_UTILE_SHIFT); + t_x2 = EOG_UTA_BBOX_X1 (bb) + (x << EOG_UTILE_SHIFT); + t_y2 = EOG_UTA_BBOX_Y1 (bb) + (y << EOG_UTILE_SHIFT); + + d_x1 = t_x1 + xofs; + d_y1 = t_y1 + yofs; + d_x2 = t_x2 + xofs; + d_y2 = t_y2 + yofs; + + d_tx1 = d_x1 >> EOG_UTILE_SHIFT; + d_ty1 = d_y1 >> EOG_UTILE_SHIFT; + + dofs = (d_ty1 - uta->y0) * uta->width + d_tx1 - uta->x0; + + d_xf1 = d_x1 & (EOG_UTILE_SIZE - 1); + d_yf1 = d_y1 & (EOG_UTILE_SIZE - 1); + d_xf2 = ((d_x2 - 1) & (EOG_UTILE_SIZE - 1)) + 1; + d_yf2 = ((d_y2 - 1) & (EOG_UTILE_SIZE - 1)) + 1; + + if (d_x2 - d_x1 <= EOG_UTILE_SIZE - d_xf1) { + if (d_y2 - d_y1 <= EOG_UTILE_SIZE - d_yf1) { + if (d_tx1 >= uta->x0 && d_tx1 < uta->x0 + uta->width + && d_ty1 >= uta->y0 && d_ty1 < uta->y0 + uta->height) { + dbb = utiles[dofs]; + if (dbb == 0) + utiles[dofs] = EOG_UTA_BBOX_CONS ( + d_xf1, d_yf1, d_xf2, d_yf2); + else + utiles[dofs] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (dbb), d_xf1), + MIN (EOG_UTA_BBOX_Y0 (dbb), d_yf1), + MAX (EOG_UTA_BBOX_X1 (dbb), d_xf2), + MAX (EOG_UTA_BBOX_Y1 (dbb), d_yf2)); + } + } else { + /* Top tile */ + if (d_tx1 >= uta->x0 && d_tx1 < uta->x0 + uta->width + && d_ty1 >= uta->y0 && d_ty1 < uta->y0 + uta->height) { + dbb = utiles[dofs]; + if (dbb == 0) + utiles[dofs] = EOG_UTA_BBOX_CONS ( + d_xf1, d_yf1, d_xf2, EOG_UTILE_SIZE); + else + utiles[dofs] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (dbb), d_xf1), + MIN (EOG_UTA_BBOX_Y0 (dbb), d_yf1), + MAX (EOG_UTA_BBOX_X1 (dbb), d_xf2), + EOG_UTILE_SIZE); + } + + dofs += uta->width; + + /* Bottom tile */ + if (d_tx1 >= uta->x0 && d_tx1 < uta->x0 + uta->width + && d_ty1 + 1 >= uta->y0 && d_ty1 + 1 < uta->y0 + uta->height) { + dbb = utiles[dofs]; + if (dbb == 0) + utiles[dofs] = EOG_UTA_BBOX_CONS ( + d_xf1, 0, d_xf2, d_yf2); + else + utiles[dofs] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (dbb), d_xf1), + 0, + MAX (EOG_UTA_BBOX_X1 (dbb), d_xf2), + MAX (EOG_UTA_BBOX_Y1 (dbb), d_yf2)); + } + } + } else { + if (d_y2 - d_y1 <= EOG_UTILE_SIZE - d_yf1) { + /* Left tile */ + if (d_tx1 >= uta->x0 && d_tx1 < uta->x0 + uta->width + && d_ty1 >= uta->y0 && d_ty1 < uta->y0 + uta->height) { + dbb = utiles[dofs]; + if (dbb == 0) + utiles[dofs] = EOG_UTA_BBOX_CONS ( + d_xf1, d_yf1, EOG_UTILE_SIZE, d_yf2); + else + utiles[dofs] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (dbb), d_xf1), + MIN (EOG_UTA_BBOX_Y0 (dbb), d_yf1), + EOG_UTILE_SIZE, + MAX (EOG_UTA_BBOX_Y1 (dbb), d_yf2)); + } + + dofs++; + + /* Right tile */ + if (d_tx1 + 1 >= uta->x0 && d_tx1 + 1 < uta->x0 + uta->width + && d_ty1 >= uta->y0 && d_ty1 < uta->y0 + uta->height) { + dbb = utiles[dofs]; + if (dbb == 0) + utiles[dofs] = EOG_UTA_BBOX_CONS ( + 0, d_yf1, d_xf2, d_yf2); + else + utiles[dofs] = EOG_UTA_BBOX_CONS ( + 0, + MIN (EOG_UTA_BBOX_Y0 (dbb), d_yf1), + MAX (EOG_UTA_BBOX_X1 (dbb), d_xf2), + MAX (EOG_UTA_BBOX_Y1 (dbb), d_yf2)); + } + } else { + /* Top left tile */ + if (d_tx1 >= uta->x0 && d_tx1 < uta->x0 + uta->width + && d_ty1 >= uta->y0 && d_ty1 < uta->y0 + uta->height) { + dbb = utiles[dofs]; + if (dbb == 0) + utiles[dofs] = EOG_UTA_BBOX_CONS ( + d_xf1, d_yf1, EOG_UTILE_SIZE, EOG_UTILE_SIZE); + else + utiles[dofs] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (dbb), d_xf1), + MIN (EOG_UTA_BBOX_Y0 (dbb), d_yf1), + EOG_UTILE_SIZE, + EOG_UTILE_SIZE); + } + + dofs++; + + /* Top right tile */ + if (d_tx1 + 1 >= uta->x0 && d_tx1 + 1 < uta->x0 + uta->width + && d_ty1 >= uta->y0 && d_ty1 < uta->y0 + uta->height) { + dbb = utiles[dofs]; + if (dbb == 0) + utiles[dofs] = EOG_UTA_BBOX_CONS ( + 0, d_yf1, d_xf2, EOG_UTILE_SIZE); + else + utiles[dofs] = EOG_UTA_BBOX_CONS ( + 0, + MIN (EOG_UTA_BBOX_Y0 (dbb), d_yf1), + MAX (EOG_UTA_BBOX_X1 (dbb), d_xf2), + EOG_UTILE_SIZE); + } + + dofs += uta->width - 1; + + /* Bottom left tile */ + if (d_tx1 >= uta->x0 && d_tx1 < uta->x0 + uta->width + && d_ty1 + 1 >= uta->y0 && d_ty1 + 1 < uta->y0 + uta->height) { + dbb = utiles[dofs]; + if (dbb == 0) + utiles[dofs] = EOG_UTA_BBOX_CONS ( + d_xf1, 0, EOG_UTILE_SIZE, d_yf2); + else + utiles[dofs] = EOG_UTA_BBOX_CONS ( + MIN (EOG_UTA_BBOX_X0 (dbb), d_xf1), + 0, + EOG_UTILE_SIZE, + MAX (EOG_UTA_BBOX_Y1 (dbb), d_yf2)); + } + + dofs++; + + /* Bottom right tile */ + if (d_tx1 + 1 >= uta->x0 && d_tx1 + 1 < uta->x0 + uta->width + && d_ty1 + 1 >= uta->y0 && d_ty1 + 1 < uta->y0 + uta->height) { + dbb = utiles[dofs]; + if (dbb == 0) + utiles[dofs] = EOG_UTA_BBOX_CONS ( + 0, 0, d_xf2, d_yf2); + else + utiles[dofs] = EOG_UTA_BBOX_CONS ( + 0, + 0, + MAX (EOG_UTA_BBOX_X1 (dbb), d_xf2), + MAX (EOG_UTA_BBOX_Y1 (dbb), d_yf2)); + } + } + } +} + +/** + * uta_copy_area: + * @uta: A microtile array. + * @src_x: Left coordinate of source rectangle. + * @src_y: Top coordinate of source rectangle. + * @dest_x: Left coordinate of destination. + * @dest_y: Top coordinate of destination. + * @width: Width of region to copy. + * @height: Height of region to copy. + * + * Copies a rectangular region within a microtile array. The array will not be + * expanded if the destination area does not fit within it; rather only the area + * that fits will be copied. The source rectangle must be completely contained + * within the microtile array. + **/ +void +uta_copy_area (EogUta *uta, int src_x, int src_y, int dest_x, int dest_y, int width, int height) +{ + int rect_x1, rect_y1, rect_x2, rect_y2; + gboolean top_to_bottom, left_to_right; + int xofs, yofs; + int x, y; + + g_return_if_fail (uta != NULL); + g_return_if_fail (width >= 0 && height >= 0); + g_return_if_fail (src_x >= uta->x0 << EOG_UTILE_SHIFT); + g_return_if_fail (src_y >= uta->y0 << EOG_UTILE_SHIFT); + g_return_if_fail (src_x + width <= (uta->x0 + uta->width) << EOG_UTILE_SHIFT); + g_return_if_fail (src_y + height <= (uta->y0 + uta->height) << EOG_UTILE_SHIFT); + + if ((src_x == dest_x && src_y == dest_y) || width == 0 || height == 0) + return; + + /* FIXME: This function is not perfect. It *adds* the copied/offsetted + * area to the original contents of the microtile array, thus growing + * the region more than needed. The effect should be to "overwrite" the + * original contents, just like XCopyArea() does. Care needs to be + * taken when the edges of the rectangle do not fall on microtile + * boundaries, because tiles may need to be "split". + * + * Maybe this will work: + * + * 1. Copy the rectangular array of tiles that form the region to a + * temporary buffer. + * + * 2. uta_remove_rect() the *destination* rectangle from the original + * microtile array. + * + * 3. Copy back the temporary buffer to the original array while + * offsetting it in the same way as copy_tile() does. + */ + + rect_x1 = src_x >> EOG_UTILE_SHIFT; + rect_y1 = src_y >> EOG_UTILE_SHIFT; + rect_x2 = (src_x + width + EOG_UTILE_SIZE - 1) >> EOG_UTILE_SHIFT; + rect_y2 = (src_y + height + EOG_UTILE_SIZE - 1) >> EOG_UTILE_SHIFT; + + xofs = dest_x - src_x; + yofs = dest_y - src_y; + + left_to_right = xofs < 0; + top_to_bottom = yofs < 0; + + if (top_to_bottom && left_to_right) { + for (y = rect_y1; y < rect_y2; y++) + for (x = rect_x1; x < rect_x2; x++) + copy_tile (uta, x, y, xofs, yofs); + } else if (top_to_bottom && !left_to_right) { + for (y = rect_y1; y < rect_y2; y++) + for (x = rect_x2 - 1; x >= rect_x1; x--) + copy_tile (uta, x, y, xofs, yofs); + } else if (!top_to_bottom && left_to_right) { + for (y = rect_y2 - 1; y >= rect_y1; y--) + for (x = rect_x1; x < rect_x2; x++) + copy_tile (uta, x, y, xofs, yofs); + } else if (!top_to_bottom && !left_to_right) { + for (y = rect_y2 - 1; y >= rect_y1; y--) + for (x = rect_x2 - 1; x >= rect_x1; x--) + copy_tile (uta, x, y, xofs, yofs); + } +} diff -Nru eog-3.26.2/src/uta.h eog-3.27.90/src/uta.h --- eog-3.26.2/src/uta.h 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/src/uta.h 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,75 @@ +/* Eye of Gnome image viewer - Microtile array utilities + * + * Copyright (C) 2000-2009 The Free Software Foundation + * + * Author: Federico Mena-Quintero + * + * Portions based on code from libart_lgpl by Raph Levien. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef UTA_H +#define UTA_H + +#define EOG_UTILE_SHIFT 5 +#define EOG_UTILE_SIZE (1 << EOG_UTILE_SHIFT) + +typedef guint32 EogUtaBbox; + +struct _EogIRect { + int x0, y0, x1, y1; +}; + +struct _EogUta { + int x0; + int y0; + int width; + int height; + EogUtaBbox *utiles; +}; + +typedef struct _EogIRect EogIRect; +typedef struct _EogUta EogUta; + + + +G_GNUC_INTERNAL +void eog_uta_free (EogUta *uta); + +G_GNUC_INTERNAL +void eog_irect_intersect (EogIRect *dest, + const EogIRect *src1, const EogIRect *src2); +G_GNUC_INTERNAL +int eog_irect_empty (const EogIRect *src); + +G_GNUC_INTERNAL +EogUta *uta_ensure_size (EogUta *uta, int x1, int y1, int x2, int y2); + +G_GNUC_INTERNAL +EogUta *uta_add_rect (EogUta *uta, int x1, int y1, int x2, int y2); + +G_GNUC_INTERNAL +void uta_remove_rect (EogUta *uta, int x1, int y1, int x2, int y2); + +G_GNUC_INTERNAL +void uta_find_first_glom_rect (EogUta *uta, EogIRect *rect, int max_width, int max_height); + +G_GNUC_INTERNAL +void uta_copy_area (EogUta *uta, int src_x, int src_y, int dest_x, int dest_y, int width, int height); + + + +#endif diff -Nru eog-3.26.2/tests/meson.build eog-3.27.90/tests/meson.build --- eog-3.26.2/tests/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/tests/meson.build 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,44 @@ +tests_execdir = join_paths(eog_pkglibexecdir, 'installed-tests') +tests_metadir = join_paths(eog_datadir, 'installed-tests', meson.project_name()) + +tests_data = files( + 'actions.feature', + 'common_steps.py', + 'environment.py', + 'gnome-logo.png', + 'screenshot_tour.feature' +) + +install_data( + tests_data, + install_dir: tests_execdir +) + +install_subdir( + 'steps', + install_dir: tests_execdir +) + +test_names = [ + 'about', + 'undo', + 'sidepane', + 'fullscreen', + 'wallpaper', + 'screenshot_tour1', + 'screenshot_tour2' +] + +foreach test_name: test_names + tests_conf = configuration_data() + tests_conf.set('TESTS_PATH', tests_execdir) + tests_conf.set('TEST_NAME', test_name) + + configure_file( + input: 'template.test.in', + output: test_name + '.test', + install: true, + install_dir: tests_metadir, + configuration: tests_conf + ) +endforeach diff -Nru eog-3.26.2/tests/template.test.in eog-3.27.90/tests/template.test.in --- eog-3.26.2/tests/template.test.in 1970-01-01 00:00:00.000000000 +0000 +++ eog-3.27.90/tests/template.test.in 2018-02-12 20:46:58.000000000 +0000 @@ -0,0 +1,3 @@ +[Test] +Exec=behave @TESTS_PATH@ -t @TEST_NAME@ -k -f html -o @TEST_NAME@.html -f plain +Type=session-exclusive